include/configs/BSC9132QDS.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2013 Freescale Semiconductor, Inc.
   4  */
   5
   6 /*
   7  * BSC9132 QDS board configuration file
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_MISC_INIT_R
  14
  15 #ifdef CONFIG_SDCARD
  16 #define CONFIG_RAMBOOT_SDCARD
  17 #define CONFIG_SYS_RAMBOOT
  18 #define CONFIG_SYS_EXTRA_ENV_RELOC
  19 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  20 #endif
  21 #ifdef CONFIG_SPIFLASH
  22 #define CONFIG_RAMBOOT_SPIFLASH
  23 #define CONFIG_SYS_RAMBOOT
  24 #define CONFIG_SYS_EXTRA_ENV_RELOC
  25 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  26 #endif
  27 #ifdef CONFIG_NAND_SECBOOT
  28 #define CONFIG_RAMBOOT_NAND
  29 #define CONFIG_SYS_RAMBOOT
  30 #define CONFIG_SYS_EXTRA_ENV_RELOC
  31 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  32 #endif
  33
  34 #ifdef CONFIG_NAND
  35 #define CONFIG_SPL_INIT_MINIMAL
  36 #define CONFIG_SPL_NAND_BOOT
  37 #define CONFIG_SPL_FLUSH_IMAGE
  38 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  39
  40 #define CONFIG_SPL_TEXT_BASE            0xFFFFE000
  41 #define CONFIG_SPL_MAX_SIZE             8192
  42 #define CONFIG_SPL_RELOC_TEXT_BASE      0x00100000
  43 #define CONFIG_SPL_RELOC_STACK          0x00100000
  44 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
  45 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x00200000 - CONFIG_SPL_MAX_SIZE)
  46 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  47 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0
  48 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  49 #endif
  50
  51 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  52 #define CONFIG_RESET_VECTOR_ADDRESS     0x8ffffffc
  53 #endif
  54
  55 #ifdef CONFIG_SPL_BUILD
  56 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
  57 #else
  58 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  59 #endif
  60
  61 /* High Level Configuration Options */
  62 #define CONFIG_SYS_HAS_SERDES           /* common SERDES init code */
  63
  64 #if defined(CONFIG_PCI)
  65 #define CONFIG_PCIE1                    /* PCIE controller 1 (slot 1) */
  66 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  67 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
  68 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
  69 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  70
  71 /*
  72  * PCI Windows
  73  * Memory space is mapped 1-1, but I/O space must start from 0.
  74  */
  75 /* controller 1, Slot 1, tgtid 1, Base address a000 */
  76 #define CONFIG_SYS_PCIE1_NAME           "PCIe Slot"
  77 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x90000000
  78 #define CONFIG_SYS_PCIE1_MEM_BUS        0x90000000
  79 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x90000000
  80 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
  81 #define CONFIG_SYS_PCIE1_IO_VIRT        0xC0010000
  82 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
  83 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
  84 #define CONFIG_SYS_PCIE1_IO_PHYS        0xC0010000
  85
  86 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
  87 #endif
  88
  89 #define CONFIG_ENV_OVERWRITE
  90
  91 #if defined(CONFIG_SYS_CLK_100_DDR_100)
  92 #define CONFIG_SYS_CLK_FREQ     100000000
  93 #define CONFIG_DDR_CLK_FREQ     100000000
  94 #elif defined(CONFIG_SYS_CLK_100_DDR_133)
  95 #define CONFIG_SYS_CLK_FREQ     100000000
  96 #define CONFIG_DDR_CLK_FREQ     133000000
  97 #endif
  98
  99 #define CONFIG_MP
 100
 101 #define CONFIG_HWCONFIG
 102 /*
 103  * These can be toggled for performance analysis, otherwise use default.
 104  */
 105 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
 106 #define CONFIG_BTB                      /* enable branch predition */
 107
 108 #define CONFIG_SYS_MEMTEST_START        0x01000000      /* memtest works on */
 109 #define CONFIG_SYS_MEMTEST_END          0x01ffffff
 110
 111 /* DDR Setup */
 112 #define CONFIG_SYS_SPD_BUS_NUM          0
 113 #define SPD_EEPROM_ADDRESS1             0x54 /* I2C access */
 114 #define SPD_EEPROM_ADDRESS2             0x56 /* I2C access */
 115 #define CONFIG_FSL_DDR_INTERACTIVE
 116
 117 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
 118
 119 #define CONFIG_SYS_SDRAM_SIZE           (1024)
 120 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 121 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 122
 123 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 124
 125 /* DDR3 Controller Settings */
 126 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 127 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003F
 128 #define CONFIG_SYS_DDR_CS0_CONFIG_1333  0x80004302
 129 #define CONFIG_SYS_DDR_CS0_CONFIG_800   0x80014302
 130 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 131 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 132 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 133 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 134 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 135 #define CONFIG_SYS_DDR1_CS0_BNDS       0x0040007F
 136
 137 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 138 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 139 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 140 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 141 #define CONFIG_SYS_DDR_CONTROL_800              0x470C0000
 142 #define CONFIG_SYS_DDR_CONTROL_2_800    0x04401050
 143 #define CONFIG_SYS_DDR_TIMING_4_800             0x00220001
 144 #define CONFIG_SYS_DDR_TIMING_5_800             0x03402400
 145
 146 #define CONFIG_SYS_DDR_CONTROL_1333             0x470C0008
 147 #define CONFIG_SYS_DDR_CONTROL_2_1333   0x24401010
 148 #define CONFIG_SYS_DDR_TIMING_4_1333            0x00000001
 149 #define CONFIG_SYS_DDR_TIMING_5_1333            0x03401400
 150
 151 #define CONFIG_SYS_DDR_TIMING_3_800             0x00020000
 152 #define CONFIG_SYS_DDR_TIMING_0_800             0x00330004
 153 #define CONFIG_SYS_DDR_TIMING_1_800             0x6f6B4846
 154 #define CONFIG_SYS_DDR_TIMING_2_800             0x0FA8C8CF
 155 #define CONFIG_SYS_DDR_CLK_CTRL_800             0x03000000
 156 #define CONFIG_SYS_DDR_MODE_1_800               0x40461520
 157 #define CONFIG_SYS_DDR_MODE_2_800               0x8000c000
 158 #define CONFIG_SYS_DDR_INTERVAL_800             0x0C300000
 159 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800        0x8655A608
 160
 161 #define CONFIG_SYS_DDR_TIMING_3_1333            0x01061000
 162 #define CONFIG_SYS_DDR_TIMING_0_1333            0x00440104
 163 #define CONFIG_SYS_DDR_TIMING_1_1333            0x98913A45
 164 #define CONFIG_SYS_DDR_TIMING_2_1333            0x0FB8B114
 165 #define CONFIG_SYS_DDR_CLK_CTRL_1333            0x02800000
 166 #define CONFIG_SYS_DDR_MODE_1_1333              0x00061A50
 167 #define CONFIG_SYS_DDR_MODE_2_1333              0x00100000
 168 #define CONFIG_SYS_DDR_INTERVAL_1333            0x144E0513
 169 #define CONFIG_SYS_DDR_WRLVL_CONTROL_1333       0x8655F607
 170
 171 /*FIXME: the following params are constant w.r.t diff freq
 172 combinations. this should be removed later
 173 */
 174 #if CONFIG_DDR_CLK_FREQ == 100000000
 175 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800
 176 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_800
 177 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_800
 178 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800
 179 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800
 180 #elif CONFIG_DDR_CLK_FREQ == 133000000
 181 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_1333
 182 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_1333
 183 #define CONFIG_SYS_DDR_CONTROL_2        CONFIG_SYS_DDR_CONTROL_2_1333
 184 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_1333
 185 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_1333
 186 #else
 187 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800
 188 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_800
 189 #define CONFIG_SYS_DDR_CONTROL_2        CONFIG_SYS_DDR_CONTROL_2_800
 190 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800
 191 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800
 192 #endif
 193
 194 /* relocated CCSRBAR */
 195 #define CONFIG_SYS_CCSRBAR      CONFIG_SYS_CCSRBAR_DEFAULT
 196 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR_DEFAULT
 197
 198 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR
 199
 200 /* DSP CCSRBAR */
 201 #define CONFIG_SYS_FSL_DSP_CCSRBAR      CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
 202 #define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
 203
 204 /*
 205  * IFC Definitions
 206  */
 207 /* NOR Flash on IFC */
 208
 209 #define CONFIG_SYS_FLASH_BASE           0x88000000
 210 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* Max number of sector: 32M */
 211
 212 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 213
 214 #define CONFIG_SYS_NOR_CSPR     0x88000101
 215 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 216 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(5)
 217 /* NOR Flash Timing Params */
 218
 219 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) \
 220                                 | FTIM0_NOR_TEADC(0x03) \
 221                                 | FTIM0_NOR_TAVDS(0x00) \
 222                                 | FTIM0_NOR_TEAHC(0x0f))
 223 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x1d) \
 224                                 | FTIM1_NOR_TRAD_NOR(0x09) \
 225                                 | FTIM1_NOR_TSEQRAD_NOR(0x09))
 226 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x1) \
 227                                 | FTIM2_NOR_TCH(0x4) \
 228                                 | FTIM2_NOR_TWPH(0x7) \
 229                                 | FTIM2_NOR_TWP(0x1e))
 230 #define CONFIG_SYS_NOR_FTIM3    0x0
 231
 232 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 233 #define CONFIG_SYS_FLASH_QUIET_TEST
 234 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 235 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 236
 237 #undef CONFIG_SYS_FLASH_CHECKSUM
 238 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 239 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 240
 241 /* CFI for NOR Flash */
 242 #define CONFIG_FLASH_CFI_DRIVER
 243 #define CONFIG_SYS_FLASH_CFI
 244 #define CONFIG_SYS_FLASH_EMPTY_INFO
 245 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 246
 247 /* NAND Flash on IFC */
 248 #define CONFIG_SYS_NAND_BASE            0xff800000
 249 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 250
 251 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 252                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 253                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 254                                 | CSPR_V)
 255 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 256
 257 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 258                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 259                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 260                                 | CSOR_NAND_RAL_2       /* RAL = 2Byes */ \
 261                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 262                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 263                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 264
 265 /* NAND Flash Timing Params */
 266 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x03) \
 267                                         | FTIM0_NAND_TWP(0x05) \
 268                                         | FTIM0_NAND_TWCHT(0x02) \
 269                                         | FTIM0_NAND_TWH(0x04))
 270 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x1c) \
 271                                         | FTIM1_NAND_TWBE(0x1e) \
 272                                         | FTIM1_NAND_TRR(0x07) \
 273                                         | FTIM1_NAND_TRP(0x05))
 274 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x08) \
 275                                         | FTIM2_NAND_TREH(0x04) \
 276                                         | FTIM2_NAND_TWHRE(0x11))
 277 #define CONFIG_SYS_NAND_FTIM3           FTIM3_NAND_TWW(0x04)
 278
 279 #define CONFIG_SYS_NAND_DDR_LAW         11
 280
 281 /* NAND */
 282 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 283 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 284
 285 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 286
 287 #ifndef CONFIG_SPL_BUILD
 288 #define CONFIG_FSL_QIXIS
 289 #endif
 290 #ifdef CONFIG_FSL_QIXIS
 291 #define CONFIG_SYS_FPGA_BASE    0xffb00000
 292 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 293 #define QIXIS_BASE      CONFIG_SYS_FPGA_BASE
 294 #define QIXIS_LBMAP_SWITCH      9
 295 #define QIXIS_LBMAP_MASK        0x07
 296 #define QIXIS_LBMAP_SHIFT       0
 297 #define QIXIS_LBMAP_DFLTBANK            0x00
 298 #define QIXIS_LBMAP_ALTBANK             0x04
 299 #define QIXIS_RST_CTL_RESET             0x83
 300 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 301 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 302 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 303
 304 #define CONFIG_SYS_FPGA_BASE_PHYS       CONFIG_SYS_FPGA_BASE
 305
 306 #define CONFIG_SYS_CSPR2                (CSPR_PHYS_ADDR(CONFIG_SYS_FPGA_BASE) \
 307                                         | CSPR_PORT_SIZE_8 \
 308                                         | CSPR_MSEL_GPCM \
 309                                         | CSPR_V)
 310 #define CONFIG_SYS_AMASK2               IFC_AMASK(64*1024)
 311 #define CONFIG_SYS_CSOR2                0x0
 312 /* CPLD Timing parameters for IFC CS3 */
 313 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 314                                         FTIM0_GPCM_TEADC(0x0e) | \
 315                                         FTIM0_GPCM_TEAHC(0x0e))
 316 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 317                                         FTIM1_GPCM_TRAD(0x1f))
 318 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 319                                         FTIM2_GPCM_TCH(0x8) | \
 320                                         FTIM2_GPCM_TWP(0x1f))
 321 #define CONFIG_SYS_CS2_FTIM3            0x0
 322 #endif
 323
 324 /* Set up IFC registers for boot location NOR/NAND */
 325 #if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 326 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 327 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 328 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 329 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 330 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 331 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 332 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 333 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 334 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 335 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 336 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 337 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 338 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 339 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 340 #else
 341 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 342 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 343 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 344 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 345 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 346 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 347 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 348 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 349 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 350 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 351 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 352 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 353 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 354 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 355 #endif
 356
 357 #define CONFIG_SYS_INIT_RAM_LOCK
 358 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* stack in RAM */
 359 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000 /* End of used area in RAM */
 360
 361 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE \
 362                                                 - GENERATED_GBL_DATA_SIZE)
 363 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 364
 365 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 366 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc*/
 367
 368 /* Serial Port */
 369 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 370 #define CONFIG_SYS_NS16550_SERIAL
 371 #define CONFIG_SYS_NS16550_REG_SIZE     1
 372 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 373 #ifdef CONFIG_SPL_BUILD
 374 #define CONFIG_NS16550_MIN_FUNCTIONS
 375 #endif
 376
 377 #define CONFIG_SYS_BAUDRATE_TABLE       \
 378         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 379
 380 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
 381 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
 382 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR + 0x4700)
 383 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR + 0x4800)
 384
 385 #define CONFIG_SYS_I2C
 386 #define CONFIG_SYS_I2C_FSL
 387 #define CONFIG_SYS_FSL_I2C_SPEED        400800 /* I2C speed and slave address*/
 388 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 389 #define CONFIG_SYS_FSL_I2C2_SPEED       400800 /* I2C speed and slave address*/
 390 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 391 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 392 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 393
 394 /* I2C EEPROM */
 395 #define CONFIG_ID_EEPROM
 396 #ifdef CONFIG_ID_EEPROM
 397 #define CONFIG_SYS_I2C_EEPROM_NXID
 398 #endif
 399 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 400 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 401 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 402
 403 /* enable read and write access to EEPROM */
 404 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 405 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 406 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 407
 408 /* I2C FPGA */
 409 #define CONFIG_I2C_FPGA
 410 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 411
 412 #define CONFIG_RTC_DS3231
 413 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 414
 415 /*
 416  * SPI interface will not be available in case of NAND boot SPI CS0 will be
 417  * used for SLIC
 418  */
 419 /* eSPI - Enhanced SPI */
 420 #ifdef CONFIG_FSL_ESPI
 421 #define CONFIG_SF_DEFAULT_SPEED         10000000
 422 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 423 #endif
 424
 425 #if defined(CONFIG_TSEC_ENET)
 426
 427 #define CONFIG_MII                      /* MII PHY management */
 428 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 429 #define CONFIG_TSEC1    1
 430 #define CONFIG_TSEC1_NAME       "eTSEC1"
 431 #define CONFIG_TSEC2    1
 432 #define CONFIG_TSEC2_NAME       "eTSEC2"
 433
 434 #define TSEC1_PHY_ADDR          0
 435 #define TSEC2_PHY_ADDR          1
 436
 437 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 438 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 439
 440 #define TSEC1_PHYIDX            0
 441 #define TSEC2_PHYIDX            0
 442
 443 #define CONFIG_ETHPRIME         "eTSEC1"
 444
 445 /* TBI PHY configuration for SGMII mode */
 446 #define CONFIG_TSEC_TBICR_SETTINGS ( \
 447                 TBICR_PHY_RESET \
 448                 | TBICR_ANEG_ENABLE \
 449                 | TBICR_FULL_DUPLEX \
 450                 | TBICR_SPEED1_SET \
 451                 )
 452
 453 #endif  /* CONFIG_TSEC_ENET */
 454
 455 #ifdef CONFIG_MMC
 456 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 457 #endif
 458
 459 #ifdef CONFIG_USB_EHCI_HCD
 460 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 461 #define CONFIG_USB_EHCI_FSL
 462 #define CONFIG_HAS_FSL_DR_USB
 463 #endif
 464
 465 /*
 466  * Environment
 467  */
 468 #if defined(CONFIG_RAMBOOT_SDCARD)
 469 #define CONFIG_FSL_FIXED_MMC_LOCATION
 470 #define CONFIG_SYS_MMC_ENV_DEV          0
 471 #define CONFIG_ENV_SIZE                 0x2000
 472 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
 473 #define CONFIG_ENV_SPI_BUS      0
 474 #define CONFIG_ENV_SPI_CS       0
 475 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 476 #define CONFIG_ENV_SPI_MODE     0
 477 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 478 #define CONFIG_ENV_SECT_SIZE    0x10000
 479 #define CONFIG_ENV_SIZE         0x2000
 480 #elif defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 481 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 482 #define CONFIG_ENV_OFFSET       ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
 483 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE)
 484 #elif defined(CONFIG_SYS_RAMBOOT)
 485 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE - 0x1000)
 486 #define CONFIG_ENV_SIZE                 0x2000
 487 #else
 488 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 489 #define CONFIG_ENV_SIZE         0x2000
 490 #define CONFIG_ENV_SECT_SIZE    0x20000
 491 #endif
 492
 493 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 494 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 495
 496 /*
 497  * Miscellaneous configurable options
 498  */
 499 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 500
 501 /*
 502  * For booting Linux, the board info and command line data
 503  * have to be in the first 64 MB of memory, since this is
 504  * the maximum mapped by the Linux kernel during initialization.
 505  */
 506 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 507 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 508
 509 #if defined(CONFIG_CMD_KGDB)
 510 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 511 #endif
 512
 513 /*
 514  * Dynamic MTD Partition support with mtdparts
 515  */
 516 #ifdef CONFIG_MTD_NOR_FLASH
 517 #define CONFIG_MTD_DEVICE
 518 #define CONFIG_MTD_PARTITIONS
 519 #define CONFIG_FLASH_CFI_MTD
 520 #endif
 521 /*
 522  * Environment Configuration
 523  */
 524
 525 #if defined(CONFIG_TSEC_ENET)
 526 #define CONFIG_HAS_ETH0
 527 #define CONFIG_HAS_ETH1
 528 #endif
 529
 530 #define CONFIG_HOSTNAME         "BSC9132qds"
 531 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 532 #define CONFIG_BOOTFILE         "uImage"
 533 #define CONFIG_UBOOTPATH        "u-boot.bin"
 534
 535 #ifdef CONFIG_SDCARD
 536 #define CONFIG_DEF_HWCONFIG     "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
 537 #else
 538 #define CONFIG_DEF_HWCONFIG     "hwconfig=sim;usb1:dr_mode=host,phy_type=ulpi\0"
 539 #endif
 540
 541 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 542         "netdev=eth0\0"                                         \
 543         "uboot=" CONFIG_UBOOTPATH "\0"                          \
 544         "loadaddr=1000000\0"                    \
 545         "bootfile=uImage\0"     \
 546         "consoledev=ttyS0\0"                            \
 547         "ramdiskaddr=2000000\0"                 \
 548         "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
 549         "fdtaddr=1e00000\0"                             \
 550         "fdtfile=bsc9132qds.dtb\0"              \
 551         "bdev=sda1\0"   \
 552         CONFIG_DEF_HWCONFIG\
 553         "othbootargs=mem=880M ramdisk_size=600000 " \
 554                 "default_hugepagesz=256m hugepagesz=256m hugepages=1 " \
 555                 "isolcpus=0\0" \
 556         "usbext2boot=setenv bootargs root=/dev/ram rw " \
 557                 "console=$consoledev,$baudrate $othbootargs; "  \
 558                 "usb start;"                    \
 559                 "ext2load usb 0:4 $loadaddr $bootfile;"         \
 560                 "ext2load usb 0:4 $fdtaddr $fdtfile;"   \
 561                 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"   \
 562                 "bootm $loadaddr $ramdiskaddr $fdtaddr\0"       \
 563         "debug_halt_off=mw ff7e0e30 0xf0000000;"
 564
 565 #define CONFIG_NFSBOOTCOMMAND   \
 566         "setenv bootargs root=/dev/nfs rw "     \
 567         "nfsroot=$serverip:$rootpath "  \
 568         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 569         "console=$consoledev,$baudrate $othbootargs;" \
 570         "tftp $loadaddr $bootfile;"     \
 571         "tftp $fdtaddr $fdtfile;"       \
 572         "bootm $loadaddr - $fdtaddr"
 573
 574 #define CONFIG_HDBOOT   \
 575         "setenv bootargs root=/dev/$bdev rw rootdelay=30 "      \
 576         "console=$consoledev,$baudrate $othbootargs;" \
 577         "usb start;"    \
 578         "ext2load usb 0:1 $loadaddr /boot/$bootfile;"   \
 579         "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"     \
 580         "bootm $loadaddr - $fdtaddr"
 581
 582 #define CONFIG_RAMBOOTCOMMAND           \
 583         "setenv bootargs root=/dev/ram rw "     \
 584         "console=$consoledev,$baudrate $othbootargs; "  \
 585         "tftp $ramdiskaddr $ramdiskfile;"       \
 586         "tftp $loadaddr $bootfile;"             \
 587         "tftp $fdtaddr $fdtfile;"               \
 588         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 589
 590 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
 591
 592 #include <asm/fsl_secure_boot.h>
 593
 594 #endif  /* __CONFIG_H */