include/configs/B4860QDS.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_DISPLAY_BOARDINFO
  11
  12 /*
  13  * B4860 QDS board configuration file
  14  */
  15 #define CONFIG_B4860QDS
  16
  17 #ifdef CONFIG_RAMBOOT_PBL
  18 #define CONFIG_SYS_FSL_PBL_PBI  $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg
  19 #define CONFIG_SYS_FSL_PBL_RCW  $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg
  20 #ifndef CONFIG_NAND
  21 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  22 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  23 #else
  24 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  25 #define CONFIG_SPL_SERIAL_SUPPORT
  26 #define CONFIG_SPL_FLUSH_IMAGE
  27 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  28 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  29 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  30 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  31 #define CONFIG_SYS_TEXT_BASE            0x00201000
  32 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  33 #define CONFIG_SPL_PAD_TO               0x40000
  34 #define CONFIG_SPL_MAX_SIZE             0x28000
  35 #define RESET_VECTOR_OFFSET             0x27FFC
  36 #define BOOT_PAGE_OFFSET                0x27000
  37 #define CONFIG_SPL_NAND_SUPPORT
  38 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  39 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  40 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  41 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  42 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  43 #define CONFIG_SPL_NAND_BOOT
  44 #ifdef CONFIG_SPL_BUILD
  45 #define CONFIG_SPL_SKIP_RELOCATE
  46 #define CONFIG_SPL_COMMON_INIT_DDR
  47 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  48 #define CONFIG_SYS_NO_FLASH
  49 #endif
  50 #endif
  51 #endif
  52
  53 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  54 /* Set 1M boot space */
  55 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  56 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  57                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  58 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  59 #define CONFIG_SYS_NO_FLASH
  60 #endif
  61
  62 /* High Level Configuration Options */
  63 #define CONFIG_BOOKE
  64 #define CONFIG_E500                     /* BOOKE e500 family */
  65 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  66 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  67 #define CONFIG_MP                       /* support multiple processors */
  68
  69 #ifndef CONFIG_SYS_TEXT_BASE
  70 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  71 #endif
  72
  73 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  74 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  75 #endif
  76
  77 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  78 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  79 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  80 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  81 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  82 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  83 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  84 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  85
  86 #ifndef CONFIG_PPC_B4420
  87 #define CONFIG_SYS_SRIO
  88 #define CONFIG_SRIO1                    /* SRIO port 1 */
  89 #define CONFIG_SRIO2                    /* SRIO port 2 */
  90 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  91 #endif
  92
  93 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  94
  95 /* I2C bus multiplexer */
  96 #define I2C_MUX_PCA_ADDR                0x77
  97
  98 /* VSC Crossbar switches */
  99 #define CONFIG_VSC_CROSSBAR
 100 #define I2C_CH_DEFAULT                  0x8
 101 #define I2C_CH_VSC3316                  0xc
 102 #define I2C_CH_VSC3308                  0xd
 103
 104 #define VSC3316_TX_ADDRESS              0x70
 105 #define VSC3316_RX_ADDRESS              0x71
 106 #define VSC3308_TX_ADDRESS              0x02
 107 #define VSC3308_RX_ADDRESS              0x03
 108
 109 /* IDT clock synthesizers */
 110 #define CONFIG_IDT8T49N222A
 111 #define I2C_CH_IDT                     0x9
 112
 113 #define IDT_SERDES1_ADDRESS            0x6E
 114 #define IDT_SERDES2_ADDRESS            0x6C
 115
 116 /* Voltage monitor on channel 2*/
 117 #define I2C_MUX_CH_VOL_MONITOR          0xa
 118 #define I2C_VOL_MONITOR_ADDR            0x40
 119 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 120 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 121 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 122
 123 #define CONFIG_ZM7300
 124 #define I2C_MUX_CH_DPM                  0xa
 125 #define I2C_DPM_ADDR                    0x28
 126
 127 #define CONFIG_ENV_OVERWRITE
 128
 129 #ifdef CONFIG_SYS_NO_FLASH
 130 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
 131 #define CONFIG_ENV_IS_NOWHERE
 132 #endif
 133 #else
 134 #define CONFIG_FLASH_CFI_DRIVER
 135 #define CONFIG_SYS_FLASH_CFI
 136 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 137 #endif
 138
 139 #if defined(CONFIG_SPIFLASH)
 140 #define CONFIG_SYS_EXTRA_ENV_RELOC
 141 #define CONFIG_ENV_IS_IN_SPI_FLASH
 142 #define CONFIG_ENV_SPI_BUS              0
 143 #define CONFIG_ENV_SPI_CS               0
 144 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 145 #define CONFIG_ENV_SPI_MODE             0
 146 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 147 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 148 #define CONFIG_ENV_SECT_SIZE            0x10000
 149 #elif defined(CONFIG_SDCARD)
 150 #define CONFIG_SYS_EXTRA_ENV_RELOC
 151 #define CONFIG_ENV_IS_IN_MMC
 152 #define CONFIG_SYS_MMC_ENV_DEV          0
 153 #define CONFIG_ENV_SIZE                 0x2000
 154 #define CONFIG_ENV_OFFSET               (512 * 1097)
 155 #elif defined(CONFIG_NAND)
 156 #define CONFIG_SYS_EXTRA_ENV_RELOC
 157 #define CONFIG_ENV_IS_IN_NAND
 158 #define CONFIG_ENV_SIZE                 0x2000
 159 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 160 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 161 #define CONFIG_ENV_IS_IN_REMOTE
 162 #define CONFIG_ENV_ADDR         0xffe20000
 163 #define CONFIG_ENV_SIZE         0x2000
 164 #elif defined(CONFIG_ENV_IS_NOWHERE)
 165 #define CONFIG_ENV_SIZE         0x2000
 166 #else
 167 #define CONFIG_ENV_IS_IN_FLASH
 168 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 169 #define CONFIG_ENV_SIZE         0x2000
 170 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 171 #endif
 172
 173 #ifndef __ASSEMBLY__
 174 unsigned long get_board_sys_clk(void);
 175 unsigned long get_board_ddr_clk(void);
 176 #endif
 177 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 178 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 179
 180 /*
 181  * These can be toggled for performance analysis, otherwise use default.
 182  */
 183 #define CONFIG_SYS_CACHE_STASHING
 184 #define CONFIG_BTB                      /* toggle branch predition */
 185 #define CONFIG_DDR_ECC
 186 #ifdef CONFIG_DDR_ECC
 187 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 188 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 189 #endif
 190
 191 #define CONFIG_ENABLE_36BIT_PHYS
 192
 193 #ifdef CONFIG_PHYS_64BIT
 194 #define CONFIG_ADDR_MAP
 195 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 196 #endif
 197
 198 #if 0
 199 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 200 #endif
 201 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 202 #define CONFIG_SYS_MEMTEST_END          0x00400000
 203 #define CONFIG_SYS_ALT_MEMTEST
 204 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 205
 206 /*
 207  *  Config the L3 Cache as L3 SRAM
 208  */
 209 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 210 #define CONFIG_SYS_L3_SIZE              256 << 10
 211 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 212 #ifdef CONFIG_NAND
 213 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 214 #endif
 215 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 216 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 217 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 218 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 219
 220 #ifdef CONFIG_PHYS_64BIT
 221 #define CONFIG_SYS_DCSRBAR              0xf0000000
 222 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 223 #endif
 224
 225 /* EEPROM */
 226 #define CONFIG_ID_EEPROM
 227 #define CONFIG_SYS_I2C_EEPROM_NXID
 228 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 229 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 230 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 231 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 232 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 233
 234 /*
 235  * DDR Setup
 236  */
 237 #define CONFIG_VERY_BIG_RAM
 238 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 239 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 240
 241 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 242 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 243 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 244
 245 #define CONFIG_DDR_SPD
 246 #define CONFIG_SYS_DDR_RAW_TIMING
 247 #define CONFIG_SYS_FSL_DDR3
 248 #ifndef CONFIG_SPL_BUILD
 249 #define CONFIG_FSL_DDR_INTERACTIVE
 250 #endif
 251
 252 #define CONFIG_SYS_SPD_BUS_NUM  0
 253 #define SPD_EEPROM_ADDRESS1     0x51
 254 #define SPD_EEPROM_ADDRESS2     0x53
 255
 256 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 257 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 258
 259 /*
 260  * IFC Definitions
 261  */
 262 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 263 #ifdef CONFIG_PHYS_64BIT
 264 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 265 #else
 266 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 267 #endif
 268
 269 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 270 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 271                                 + 0x8000000) | \
 272                                 CSPR_PORT_SIZE_16 | \
 273                                 CSPR_MSEL_NOR | \
 274                                 CSPR_V)
 275 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 276 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 277                                 CSPR_PORT_SIZE_16 | \
 278                                 CSPR_MSEL_NOR | \
 279                                 CSPR_V)
 280 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128 * 1024 * 1024)
 281 /* NOR Flash Timing Params */
 282 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(4)
 283 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) | \
 284                                 FTIM0_NOR_TEADC(0x04) | \
 285                                 FTIM0_NOR_TEAHC(0x20))
 286 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 287                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 288                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 289 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x01) | \
 290                                 FTIM2_NOR_TCH(0x0E) | \
 291                                 FTIM2_NOR_TWPH(0x0E) | \
 292                                 FTIM2_NOR_TWP(0x1c))
 293 #define CONFIG_SYS_NOR_FTIM3    0x0
 294
 295 #define CONFIG_SYS_FLASH_QUIET_TEST
 296 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 297
 298 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 299 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 300 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 301 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 302
 303 #define CONFIG_SYS_FLASH_EMPTY_INFO
 304 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 305                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 306
 307 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 308 #define CONFIG_FSL_QIXIS_V2
 309 #define QIXIS_BASE              0xffdf0000
 310 #ifdef CONFIG_PHYS_64BIT
 311 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 312 #else
 313 #define QIXIS_BASE_PHYS         QIXIS_BASE
 314 #endif
 315 #define QIXIS_LBMAP_SWITCH              0x01
 316 #define QIXIS_LBMAP_MASK                0x0f
 317 #define QIXIS_LBMAP_SHIFT               0
 318 #define QIXIS_LBMAP_DFLTBANK            0x00
 319 #define QIXIS_LBMAP_ALTBANK             0x02
 320 #define QIXIS_RST_CTL_RESET             0x31
 321 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 322 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 323 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 324
 325 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 326 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 327                                 | CSPR_PORT_SIZE_8 \
 328                                 | CSPR_MSEL_GPCM \
 329                                 | CSPR_V)
 330 #define CONFIG_SYS_AMASK3       IFC_AMASK(4 * 1024)
 331 #define CONFIG_SYS_CSOR3        0x0
 332 /* QIXIS Timing parameters for IFC CS3 */
 333 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 334                                         FTIM0_GPCM_TEADC(0x0e) | \
 335                                         FTIM0_GPCM_TEAHC(0x0e))
 336 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 337                                         FTIM1_GPCM_TRAD(0x1f))
 338 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 339                                         FTIM2_GPCM_TCH(0x8) | \
 340                                         FTIM2_GPCM_TWP(0x1f))
 341 #define CONFIG_SYS_CS3_FTIM3            0x0
 342
 343 /* NAND Flash on IFC */
 344 #define CONFIG_NAND_FSL_IFC
 345 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 346 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 347 #define CONFIG_SYS_NAND_BASE            0xff800000
 348 #ifdef CONFIG_PHYS_64BIT
 349 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 350 #else
 351 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 352 #endif
 353
 354 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 355 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 356                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 357                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 358                                 | CSPR_V)
 359 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
 360
 361 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 362                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 363                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 364                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 365                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 366                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 367                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 368
 369 #define CONFIG_SYS_NAND_ONFI_DETECTION
 370
 371 /* ONFI NAND Flash mode0 Timing Params */
 372 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 373                                         FTIM0_NAND_TWP(0x18)   | \
 374                                         FTIM0_NAND_TWCHT(0x07) | \
 375                                         FTIM0_NAND_TWH(0x0a))
 376 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 377                                         FTIM1_NAND_TWBE(0x39)  | \
 378                                         FTIM1_NAND_TRR(0x0e)   | \
 379                                         FTIM1_NAND_TRP(0x18))
 380 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 381                                         FTIM2_NAND_TREH(0x0a) | \
 382                                         FTIM2_NAND_TWHRE(0x1e))
 383 #define CONFIG_SYS_NAND_FTIM3           0x0
 384
 385 #define CONFIG_SYS_NAND_DDR_LAW         11
 386
 387 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 388 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 389 #define CONFIG_CMD_NAND
 390
 391 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 392
 393 #if defined(CONFIG_NAND)
 394 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 395 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 396 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 397 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 398 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 399 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 400 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 401 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 402 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 403 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 404 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 405 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 406 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 407 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 408 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 409 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 410 #else
 411 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 412 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 413 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 414 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 415 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 416 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 417 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 418 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 419 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 420 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 421 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 422 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 423 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 424 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 425 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 426 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 427 #endif
 428 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 429 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 430 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 431 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 432 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 433 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 434 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 435 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 436
 437 #ifdef CONFIG_SPL_BUILD
 438 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 439 #else
 440 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 441 #endif
 442
 443 #if defined(CONFIG_RAMBOOT_PBL)
 444 #define CONFIG_SYS_RAMBOOT
 445 #endif
 446
 447 #define CONFIG_BOARD_EARLY_INIT_R
 448 #define CONFIG_MISC_INIT_R
 449
 450 #define CONFIG_HWCONFIG
 451
 452 /* define to use L1 as initial stack */
 453 #define CONFIG_L1_INIT_RAM
 454 #define CONFIG_SYS_INIT_RAM_LOCK
 455 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 456 #ifdef CONFIG_PHYS_64BIT
 457 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 458 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 459 /* The assembler doesn't like typecast */
 460 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 461         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 462           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 463 #else
 464 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 465 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 466 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 467 #endif
 468 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 469
 470 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 471                                         GENERATED_GBL_DATA_SIZE)
 472 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 473
 474 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 475 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 476
 477 /* Serial Port - controlled on board with jumper J8
 478  * open - index 2
 479  * shorted - index 1
 480  */
 481 #define CONFIG_CONS_INDEX       1
 482 #define CONFIG_SYS_NS16550_SERIAL
 483 #define CONFIG_SYS_NS16550_REG_SIZE     1
 484 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 485
 486 #define CONFIG_SYS_BAUDRATE_TABLE       \
 487         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 488
 489 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 490 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 491 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 492 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 493 #ifndef CONFIG_SPL_BUILD
 494 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 495 #endif
 496
 497 /* I2C */
 498 #define CONFIG_SYS_I2C
 499 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 500 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 501 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 502 #define CONFIG_SYS_FSL_I2C2_SPEED       400000  /* I2C speed in Hz */
 503 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 504 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 505 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x119000
 506
 507 /*
 508  * RTC configuration
 509  */
 510 #define RTC
 511 #define CONFIG_RTC_DS3231               1
 512 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 513
 514 /*
 515  * RapidIO
 516  */
 517 #ifdef CONFIG_SYS_SRIO
 518 #ifdef CONFIG_SRIO1
 519 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 520 #ifdef CONFIG_PHYS_64BIT
 521 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 522 #else
 523 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 524 #endif
 525 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 526 #endif
 527
 528 #ifdef CONFIG_SRIO2
 529 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 530 #ifdef CONFIG_PHYS_64BIT
 531 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 532 #else
 533 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 534 #endif
 535 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 536 #endif
 537 #endif
 538
 539 /*
 540  * for slave u-boot IMAGE instored in master memory space,
 541  * PHYS must be aligned based on the SIZE
 542  */
 543 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 544 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 545 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 546 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 547 /*
 548  * for slave UCODE and ENV instored in master memory space,
 549  * PHYS must be aligned based on the SIZE
 550  */
 551 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 552 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 553 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 554
 555 /* slave core release by master*/
 556 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 557 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 558
 559 /*
 560  * SRIO_PCIE_BOOT - SLAVE
 561  */
 562 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 563 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 564 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 565                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 566 #endif
 567
 568 /*
 569  * eSPI - Enhanced SPI
 570  */
 571 #define CONFIG_SF_DEFAULT_SPEED         10000000
 572 #define CONFIG_SF_DEFAULT_MODE          0
 573
 574 /*
 575  * MAPLE
 576  */
 577 #ifdef CONFIG_PHYS_64BIT
 578 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xFA0000000ull
 579 #else
 580 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xA0000000
 581 #endif
 582
 583 /*
 584  * General PCI
 585  * Memory space is mapped 1-1, but I/O space must start from 0.
 586  */
 587
 588 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 589 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 590 #ifdef CONFIG_PHYS_64BIT
 591 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 592 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 593 #else
 594 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 595 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 596 #endif
 597 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 598 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 599 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 600 #ifdef CONFIG_PHYS_64BIT
 601 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 602 #else
 603 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 604 #endif
 605 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 606
 607 /* Qman/Bman */
 608 #ifndef CONFIG_NOBQFMAN
 609 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 610 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
 611 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 612 #ifdef CONFIG_PHYS_64BIT
 613 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 614 #else
 615 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 616 #endif
 617 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 618 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 619 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 620 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 621 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 622 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 623                                         CONFIG_SYS_BMAN_CENA_SIZE)
 624 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 625 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 626 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
 627 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 628 #ifdef CONFIG_PHYS_64BIT
 629 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 630 #else
 631 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 632 #endif
 633 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 634 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 635 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 636 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 637 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 638 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 639                                         CONFIG_SYS_QMAN_CENA_SIZE)
 640 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 641 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 642
 643 #define CONFIG_SYS_DPAA_FMAN
 644
 645 #define CONFIG_SYS_DPAA_RMAN
 646
 647 /* Default address of microcode for the Linux Fman driver */
 648 #if defined(CONFIG_SPIFLASH)
 649 /*
 650  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 651  * env, so we got 0x110000.
 652  */
 653 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 654 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 655 #elif defined(CONFIG_SDCARD)
 656 /*
 657  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 658  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
 659  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
 660  */
 661 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 662 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1130)
 663 #elif defined(CONFIG_NAND)
 664 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 665 #define CONFIG_SYS_FMAN_FW_ADDR (13 * CONFIG_SYS_NAND_BLOCK_SIZE)
 666 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 667 /*
 668  * Slave has no ucode locally, it can fetch this from remote. When implementing
 669  * in two corenet boards, slave's ucode could be stored in master's memory
 670  * space, the address can be mapped from slave TLB->slave LAW->
 671  * slave SRIO or PCIE outbound window->master inbound window->
 672  * master LAW->the ucode address in master's memory space.
 673  */
 674 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 675 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 676 #else
 677 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 678 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 679 #endif
 680 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 681 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 682 #endif /* CONFIG_NOBQFMAN */
 683
 684 #ifdef CONFIG_SYS_DPAA_FMAN
 685 #define CONFIG_FMAN_ENET
 686 #define CONFIG_PHYLIB_10G
 687 #define CONFIG_PHY_VITESSE
 688 #define CONFIG_PHY_TERANETICS
 689 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 690 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
 691 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 692 #define SGMII_CARD_PORT4_PHY_ADDR 0x11
 693 #endif
 694
 695 #ifdef CONFIG_PCI
 696 #define CONFIG_PCI_INDIRECT_BRIDGE
 697 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 698
 699 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 700 #define CONFIG_DOS_PARTITION
 701 #endif  /* CONFIG_PCI */
 702
 703 #ifdef CONFIG_FMAN_ENET
 704 #define CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR 0x10
 705 #define CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR 0x11
 706
 707 /*B4860 QDS AMC2PEX-2S default PHY_ADDR */
 708 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7       /*SLOT 1*/
 709 #define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6       /*SLOT 2*/
 710
 711 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 712 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 713 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 714 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 715
 716 #define CONFIG_MII              /* MII PHY management */
 717 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 718 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 719 #endif
 720
 721 #define CONFIG_SYS_FSL_B4860QDS_XFI_ERR
 722
 723 /*
 724  * Environment
 725  */
 726 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 727 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 728
 729 /*
 730  * Command line configuration.
 731  */
 732 #define CONFIG_CMD_DATE
 733 #define CONFIG_CMD_EEPROM
 734 #define CONFIG_CMD_ERRATA
 735 #define CONFIG_CMD_IRQ
 736 #define CONFIG_CMD_REGINFO
 737
 738 #ifdef CONFIG_PCI
 739 #define CONFIG_CMD_PCI
 740 #endif
 741
 742 /* Hash command with SHA acceleration supported in hardware */
 743 #ifdef CONFIG_FSL_CAAM
 744 #define CONFIG_CMD_HASH
 745 #define CONFIG_SHA_HW_ACCEL
 746 #endif
 747
 748 /*
 749 * USB
 750 */
 751 #define CONFIG_HAS_FSL_DR_USB
 752
 753 #ifdef CONFIG_HAS_FSL_DR_USB
 754 #define CONFIG_USB_EHCI
 755
 756 #ifdef CONFIG_USB_EHCI
 757 #define CONFIG_USB_EHCI_FSL
 758 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 759 #endif
 760 #endif
 761
 762 /*
 763  * Miscellaneous configurable options
 764  */
 765 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 766 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 767 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 768 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 769 #ifdef CONFIG_CMD_KGDB
 770 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 771 #else
 772 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 773 #endif
 774 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 775 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 776 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 777
 778 /*
 779  * For booting Linux, the board info and command line data
 780  * have to be in the first 64 MB of memory, since this is
 781  * the maximum mapped by the Linux kernel during initialization.
 782  */
 783 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 784 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 785
 786 #ifdef CONFIG_CMD_KGDB
 787 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 788 #endif
 789
 790 /*
 791  * Environment Configuration
 792  */
 793 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 794 #define CONFIG_BOOTFILE         "uImage"
 795 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 796
 797 /* default location for tftp and bootm */
 798 #define CONFIG_LOADADDR         1000000
 799
 800
 801 #define CONFIG_BAUDRATE 115200
 802
 803 #define __USB_PHY_TYPE  ulpi
 804
 805 #ifdef CONFIG_PPC_B4860
 806 #define HWCONFIG        "hwconfig=fsl_ddr:ctlr_intlv=null,"     \
 807                         "bank_intlv=cs0_cs1;"   \
 808                         "en_cpc:cpc2;"
 809 #else
 810 #define HWCONFIG        "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;"
 811 #endif
 812
 813 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 814         HWCONFIG                                                \
 815         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 816         "netdev=eth0\0"                                         \
 817         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 818         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"                     \
 819         "tftpflash=tftpboot $loadaddr $uboot && "               \
 820         "protect off $ubootaddr +$filesize && "                 \
 821         "erase $ubootaddr +$filesize && "                       \
 822         "cp.b $loadaddr $ubootaddr $filesize && "               \
 823         "protect on $ubootaddr +$filesize && "                  \
 824         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 825         "consoledev=ttyS0\0"                                    \
 826         "ramdiskaddr=2000000\0"                                 \
 827         "ramdiskfile=b4860qds/ramdisk.uboot\0"                  \
 828         "fdtaddr=1e00000\0"                                     \
 829         "fdtfile=b4860qds/b4860qds.dtb\0"                               \
 830         "bdev=sda3\0"
 831
 832 /* For emulation this causes u-boot to jump to the start of the proof point
 833    app code automatically */
 834 #define CONFIG_PROOF_POINTS                     \
 835  "setenv bootargs root=/dev/$bdev rw "          \
 836  "console=$consoledev,$baudrate $othbootargs;"  \
 837  "cpu 1 release 0x29000000 - - -;"              \
 838  "cpu 2 release 0x29000000 - - -;"              \
 839  "cpu 3 release 0x29000000 - - -;"              \
 840  "cpu 4 release 0x29000000 - - -;"              \
 841  "cpu 5 release 0x29000000 - - -;"              \
 842  "cpu 6 release 0x29000000 - - -;"              \
 843  "cpu 7 release 0x29000000 - - -;"              \
 844  "go 0x29000000"
 845
 846 #define CONFIG_HVBOOT   \
 847  "setenv bootargs config-addr=0x60000000; "     \
 848  "bootm 0x01000000 - 0x00f00000"
 849
 850 #define CONFIG_ALU                              \
 851  "setenv bootargs root=/dev/$bdev rw "          \
 852  "console=$consoledev,$baudrate $othbootargs;"  \
 853  "cpu 1 release 0x01000000 - - -;"              \
 854  "cpu 2 release 0x01000000 - - -;"              \
 855  "cpu 3 release 0x01000000 - - -;"              \
 856  "cpu 4 release 0x01000000 - - -;"              \
 857  "cpu 5 release 0x01000000 - - -;"              \
 858  "cpu 6 release 0x01000000 - - -;"              \
 859  "cpu 7 release 0x01000000 - - -;"              \
 860  "go 0x01000000"
 861
 862 #define CONFIG_LINUX                            \
 863  "setenv bootargs root=/dev/ram rw "            \
 864  "console=$consoledev,$baudrate $othbootargs;"  \
 865  "setenv ramdiskaddr 0x02000000;"               \
 866  "setenv fdtaddr 0x01e00000;"                   \
 867  "setenv loadaddr 0x1000000;"                   \
 868  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 869
 870 #define CONFIG_HDBOOT                                   \
 871         "setenv bootargs root=/dev/$bdev rw "           \
 872         "console=$consoledev,$baudrate $othbootargs;"   \
 873         "tftp $loadaddr $bootfile;"                     \
 874         "tftp $fdtaddr $fdtfile;"                       \
 875         "bootm $loadaddr - $fdtaddr"
 876
 877 #define CONFIG_NFSBOOTCOMMAND                   \
 878         "setenv bootargs root=/dev/nfs rw "     \
 879         "nfsroot=$serverip:$rootpath "          \
 880         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 881         "console=$consoledev,$baudrate $othbootargs;"   \
 882         "tftp $loadaddr $bootfile;"             \
 883         "tftp $fdtaddr $fdtfile;"               \
 884         "bootm $loadaddr - $fdtaddr"
 885
 886 #define CONFIG_RAMBOOTCOMMAND                           \
 887         "setenv bootargs root=/dev/ram rw "             \
 888         "console=$consoledev,$baudrate $othbootargs;"   \
 889         "tftp $ramdiskaddr $ramdiskfile;"               \
 890         "tftp $loadaddr $bootfile;"                     \
 891         "tftp $fdtaddr $fdtfile;"                       \
 892         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 893
 894 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 895
 896 #include <asm/fsl_secure_boot.h>
 897
 898 #endif  /* __CONFIG_H */