include/configs/B4860QDS.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_SYS_GENERIC_BOARD
  11 #define CONFIG_DISPLAY_BOARDINFO
  12
  13 /*
  14  * B4860 QDS board configuration file
  15  */
  16 #define CONFIG_B4860QDS
  17 #define CONFIG_PHYS_64BIT
  18
  19 #ifdef CONFIG_RAMBOOT_PBL
  20 #define CONFIG_SYS_FSL_PBL_PBI  $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg
  21 #define CONFIG_SYS_FSL_PBL_RCW  $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg
  22 #ifndef CONFIG_NAND
  23 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  24 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  25 #else
  26 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  27 #define CONFIG_SPL_ENV_SUPPORT
  28 #define CONFIG_SPL_SERIAL_SUPPORT
  29 #define CONFIG_SPL_FLUSH_IMAGE
  30 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  31 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  32 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  33 #define CONFIG_SPL_I2C_SUPPORT
  34 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  35 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  36 #define CONFIG_SYS_TEXT_BASE            0x00201000
  37 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  38 #define CONFIG_SPL_PAD_TO               0x40000
  39 #define CONFIG_SPL_MAX_SIZE             0x28000
  40 #define RESET_VECTOR_OFFSET             0x27FFC
  41 #define BOOT_PAGE_OFFSET                0x27000
  42 #define CONFIG_SPL_NAND_SUPPORT
  43 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  44 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  45 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  46 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  47 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  48 #define CONFIG_SPL_NAND_BOOT
  49 #ifdef CONFIG_SPL_BUILD
  50 #define CONFIG_SPL_SKIP_RELOCATE
  51 #define CONFIG_SPL_COMMON_INIT_DDR
  52 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  53 #define CONFIG_SYS_NO_FLASH
  54 #endif
  55 #endif
  56 #endif
  57
  58 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  59 /* Set 1M boot space */
  60 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  61 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  62                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  63 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  64 #define CONFIG_SYS_NO_FLASH
  65 #endif
  66
  67 /* High Level Configuration Options */
  68 #define CONFIG_BOOKE
  69 #define CONFIG_E500                     /* BOOKE e500 family */
  70 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  71 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  72 #define CONFIG_MP                       /* support multiple processors */
  73
  74 #ifndef CONFIG_SYS_TEXT_BASE
  75 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  76 #endif
  77
  78 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  79 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  80 #endif
  81
  82 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  83 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  84 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  85 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  86 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  87 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  88 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  89 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  90
  91 #ifndef CONFIG_PPC_B4420
  92 #define CONFIG_SYS_SRIO
  93 #define CONFIG_SRIO1                    /* SRIO port 1 */
  94 #define CONFIG_SRIO2                    /* SRIO port 2 */
  95 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  96 #endif
  97
  98 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  99
 100 /* I2C bus multiplexer */
 101 #define I2C_MUX_PCA_ADDR                0x77
 102
 103 /* VSC Crossbar switches */
 104 #define CONFIG_VSC_CROSSBAR
 105 #define I2C_CH_DEFAULT                  0x8
 106 #define I2C_CH_VSC3316                  0xc
 107 #define I2C_CH_VSC3308                  0xd
 108
 109 #define VSC3316_TX_ADDRESS              0x70
 110 #define VSC3316_RX_ADDRESS              0x71
 111 #define VSC3308_TX_ADDRESS              0x02
 112 #define VSC3308_RX_ADDRESS              0x03
 113
 114 /* IDT clock synthesizers */
 115 #define CONFIG_IDT8T49N222A
 116 #define I2C_CH_IDT                     0x9
 117
 118 #define IDT_SERDES1_ADDRESS            0x6E
 119 #define IDT_SERDES2_ADDRESS            0x6C
 120
 121 /* Voltage monitor on channel 2*/
 122 #define I2C_MUX_CH_VOL_MONITOR          0xa
 123 #define I2C_VOL_MONITOR_ADDR            0x40
 124 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 125 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 126 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 127
 128 #define CONFIG_ZM7300
 129 #define I2C_MUX_CH_DPM                  0xa
 130 #define I2C_DPM_ADDR                    0x28
 131
 132 #define CONFIG_ENV_OVERWRITE
 133
 134 #ifdef CONFIG_SYS_NO_FLASH
 135 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
 136 #define CONFIG_ENV_IS_NOWHERE
 137 #endif
 138 #else
 139 #define CONFIG_FLASH_CFI_DRIVER
 140 #define CONFIG_SYS_FLASH_CFI
 141 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 142 #endif
 143
 144 #if defined(CONFIG_SPIFLASH)
 145 #define CONFIG_SYS_EXTRA_ENV_RELOC
 146 #define CONFIG_ENV_IS_IN_SPI_FLASH
 147 #define CONFIG_ENV_SPI_BUS              0
 148 #define CONFIG_ENV_SPI_CS               0
 149 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 150 #define CONFIG_ENV_SPI_MODE             0
 151 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 152 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 153 #define CONFIG_ENV_SECT_SIZE            0x10000
 154 #elif defined(CONFIG_SDCARD)
 155 #define CONFIG_SYS_EXTRA_ENV_RELOC
 156 #define CONFIG_ENV_IS_IN_MMC
 157 #define CONFIG_SYS_MMC_ENV_DEV          0
 158 #define CONFIG_ENV_SIZE                 0x2000
 159 #define CONFIG_ENV_OFFSET               (512 * 1097)
 160 #elif defined(CONFIG_NAND)
 161 #define CONFIG_SYS_EXTRA_ENV_RELOC
 162 #define CONFIG_ENV_IS_IN_NAND
 163 #define CONFIG_ENV_SIZE                 0x2000
 164 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 165 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 166 #define CONFIG_ENV_IS_IN_REMOTE
 167 #define CONFIG_ENV_ADDR         0xffe20000
 168 #define CONFIG_ENV_SIZE         0x2000
 169 #elif defined(CONFIG_ENV_IS_NOWHERE)
 170 #define CONFIG_ENV_SIZE         0x2000
 171 #else
 172 #define CONFIG_ENV_IS_IN_FLASH
 173 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 174 #define CONFIG_ENV_SIZE         0x2000
 175 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 176 #endif
 177
 178 #ifndef __ASSEMBLY__
 179 unsigned long get_board_sys_clk(void);
 180 unsigned long get_board_ddr_clk(void);
 181 #endif
 182 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 183 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 184
 185 /*
 186  * These can be toggled for performance analysis, otherwise use default.
 187  */
 188 #define CONFIG_SYS_CACHE_STASHING
 189 #define CONFIG_BTB                      /* toggle branch predition */
 190 #define CONFIG_DDR_ECC
 191 #ifdef CONFIG_DDR_ECC
 192 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 193 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 194 #endif
 195
 196 #define CONFIG_ENABLE_36BIT_PHYS
 197
 198 #ifdef CONFIG_PHYS_64BIT
 199 #define CONFIG_ADDR_MAP
 200 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 201 #endif
 202
 203 #if 0
 204 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 205 #endif
 206 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 207 #define CONFIG_SYS_MEMTEST_END          0x00400000
 208 #define CONFIG_SYS_ALT_MEMTEST
 209 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 210
 211 /*
 212  *  Config the L3 Cache as L3 SRAM
 213  */
 214 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 215 #define CONFIG_SYS_L3_SIZE              256 << 10
 216 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 217 #ifdef CONFIG_NAND
 218 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 219 #endif
 220 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 221 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 222 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 223 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 224
 225 #ifdef CONFIG_PHYS_64BIT
 226 #define CONFIG_SYS_DCSRBAR              0xf0000000
 227 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 228 #endif
 229
 230 /* EEPROM */
 231 #define CONFIG_ID_EEPROM
 232 #define CONFIG_SYS_I2C_EEPROM_NXID
 233 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 234 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 235 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 236 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 237 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 238
 239 /*
 240  * DDR Setup
 241  */
 242 #define CONFIG_VERY_BIG_RAM
 243 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 244 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 245
 246 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 247 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 248 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 249
 250 #define CONFIG_DDR_SPD
 251 #define CONFIG_SYS_DDR_RAW_TIMING
 252 #define CONFIG_SYS_FSL_DDR3
 253 #ifndef CONFIG_SPL_BUILD
 254 #define CONFIG_FSL_DDR_INTERACTIVE
 255 #endif
 256
 257 #define CONFIG_SYS_SPD_BUS_NUM  0
 258 #define SPD_EEPROM_ADDRESS1     0x51
 259 #define SPD_EEPROM_ADDRESS2     0x53
 260
 261 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 262 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 263
 264 /*
 265  * IFC Definitions
 266  */
 267 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 268 #ifdef CONFIG_PHYS_64BIT
 269 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 270 #else
 271 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 272 #endif
 273
 274 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 275 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 276                                 + 0x8000000) | \
 277                                 CSPR_PORT_SIZE_16 | \
 278                                 CSPR_MSEL_NOR | \
 279                                 CSPR_V)
 280 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 281 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 282                                 CSPR_PORT_SIZE_16 | \
 283                                 CSPR_MSEL_NOR | \
 284                                 CSPR_V)
 285 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128 * 1024 * 1024)
 286 /* NOR Flash Timing Params */
 287 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(4)
 288 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) | \
 289                                 FTIM0_NOR_TEADC(0x04) | \
 290                                 FTIM0_NOR_TEAHC(0x20))
 291 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 292                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 293                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 294 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x01) | \
 295                                 FTIM2_NOR_TCH(0x0E) | \
 296                                 FTIM2_NOR_TWPH(0x0E) | \
 297                                 FTIM2_NOR_TWP(0x1c))
 298 #define CONFIG_SYS_NOR_FTIM3    0x0
 299
 300 #define CONFIG_SYS_FLASH_QUIET_TEST
 301 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 302
 303 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 304 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 305 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 306 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 307
 308 #define CONFIG_SYS_FLASH_EMPTY_INFO
 309 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 310                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 311
 312 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 313 #define CONFIG_FSL_QIXIS_V2
 314 #define QIXIS_BASE              0xffdf0000
 315 #ifdef CONFIG_PHYS_64BIT
 316 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 317 #else
 318 #define QIXIS_BASE_PHYS         QIXIS_BASE
 319 #endif
 320 #define QIXIS_LBMAP_SWITCH              0x01
 321 #define QIXIS_LBMAP_MASK                0x0f
 322 #define QIXIS_LBMAP_SHIFT               0
 323 #define QIXIS_LBMAP_DFLTBANK            0x00
 324 #define QIXIS_LBMAP_ALTBANK             0x02
 325 #define QIXIS_RST_CTL_RESET             0x31
 326 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 327 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 328 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 329
 330 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 331 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 332                                 | CSPR_PORT_SIZE_8 \
 333                                 | CSPR_MSEL_GPCM \
 334                                 | CSPR_V)
 335 #define CONFIG_SYS_AMASK3       IFC_AMASK(4 * 1024)
 336 #define CONFIG_SYS_CSOR3        0x0
 337 /* QIXIS Timing parameters for IFC CS3 */
 338 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 339                                         FTIM0_GPCM_TEADC(0x0e) | \
 340                                         FTIM0_GPCM_TEAHC(0x0e))
 341 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 342                                         FTIM1_GPCM_TRAD(0x1f))
 343 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 344                                         FTIM2_GPCM_TCH(0x8) | \
 345                                         FTIM2_GPCM_TWP(0x1f))
 346 #define CONFIG_SYS_CS3_FTIM3            0x0
 347
 348 /* NAND Flash on IFC */
 349 #define CONFIG_NAND_FSL_IFC
 350 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 351 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 352 #define CONFIG_SYS_NAND_BASE            0xff800000
 353 #ifdef CONFIG_PHYS_64BIT
 354 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 355 #else
 356 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 357 #endif
 358
 359 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 360 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 361                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 362                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 363                                 | CSPR_V)
 364 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
 365
 366 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 367                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 368                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 369                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 370                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 371                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 372                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 373
 374 #define CONFIG_SYS_NAND_ONFI_DETECTION
 375
 376 /* ONFI NAND Flash mode0 Timing Params */
 377 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 378                                         FTIM0_NAND_TWP(0x18)   | \
 379                                         FTIM0_NAND_TWCHT(0x07) | \
 380                                         FTIM0_NAND_TWH(0x0a))
 381 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 382                                         FTIM1_NAND_TWBE(0x39)  | \
 383                                         FTIM1_NAND_TRR(0x0e)   | \
 384                                         FTIM1_NAND_TRP(0x18))
 385 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 386                                         FTIM2_NAND_TREH(0x0a) | \
 387                                         FTIM2_NAND_TWHRE(0x1e))
 388 #define CONFIG_SYS_NAND_FTIM3           0x0
 389
 390 #define CONFIG_SYS_NAND_DDR_LAW         11
 391
 392 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 393 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 394 #define CONFIG_CMD_NAND
 395
 396 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 397
 398 #if defined(CONFIG_NAND)
 399 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 400 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 401 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 402 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 403 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 404 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 405 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 406 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 407 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 408 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 409 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 410 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 411 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 412 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 413 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 414 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 415 #else
 416 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 417 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 418 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 419 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 420 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 421 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 422 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 423 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 424 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 425 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 426 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 427 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 428 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 429 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 430 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 431 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 432 #endif
 433 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 434 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 435 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 436 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 437 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 438 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 439 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 440 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 441
 442 #ifdef CONFIG_SPL_BUILD
 443 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 444 #else
 445 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 446 #endif
 447
 448 #if defined(CONFIG_RAMBOOT_PBL)
 449 #define CONFIG_SYS_RAMBOOT
 450 #endif
 451
 452 #define CONFIG_BOARD_EARLY_INIT_R
 453 #define CONFIG_MISC_INIT_R
 454
 455 #define CONFIG_HWCONFIG
 456
 457 /* define to use L1 as initial stack */
 458 #define CONFIG_L1_INIT_RAM
 459 #define CONFIG_SYS_INIT_RAM_LOCK
 460 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 461 #ifdef CONFIG_PHYS_64BIT
 462 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 463 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 464 /* The assembler doesn't like typecast */
 465 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 466         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 467           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 468 #else
 469 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe0ec000 /* Initial L1 address */
 470 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 471 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 472 #endif
 473 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 474
 475 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 476                                         GENERATED_GBL_DATA_SIZE)
 477 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 478
 479 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 480 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 481
 482 /* Serial Port - controlled on board with jumper J8
 483  * open - index 2
 484  * shorted - index 1
 485  */
 486 #define CONFIG_CONS_INDEX       1
 487 #define CONFIG_SYS_NS16550
 488 #define CONFIG_SYS_NS16550_SERIAL
 489 #define CONFIG_SYS_NS16550_REG_SIZE     1
 490 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 491
 492 #define CONFIG_SYS_BAUDRATE_TABLE       \
 493         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 494
 495 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 496 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 497 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 498 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 499 #define CONFIG_SERIAL_MULTI             /* Enable both serial ports */
 500 #ifndef CONFIG_SPL_BUILD
 501 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 502 #endif
 503
 504
 505 /* Use the HUSH parser */
 506 #define CONFIG_SYS_HUSH_PARSER
 507 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 508
 509 /* pass open firmware flat tree */
 510 #define CONFIG_OF_LIBFDT
 511 #define CONFIG_OF_BOARD_SETUP
 512 #define CONFIG_OF_STDOUT_VIA_ALIAS
 513
 514 /* new uImage format support */
 515 #define CONFIG_FIT
 516 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 517
 518 /* I2C */
 519 #define CONFIG_SYS_I2C
 520 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 521 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 522 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 523 #define CONFIG_SYS_FSL_I2C2_SPEED       400000  /* I2C speed in Hz */
 524 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 525 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 526 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x119000
 527
 528 /*
 529  * RTC configuration
 530  */
 531 #define RTC
 532 #define CONFIG_RTC_DS3231               1
 533 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 534
 535 /*
 536  * RapidIO
 537  */
 538 #ifdef CONFIG_SYS_SRIO
 539 #ifdef CONFIG_SRIO1
 540 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 541 #ifdef CONFIG_PHYS_64BIT
 542 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 543 #else
 544 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 545 #endif
 546 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 547 #endif
 548
 549 #ifdef CONFIG_SRIO2
 550 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 551 #ifdef CONFIG_PHYS_64BIT
 552 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 553 #else
 554 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 555 #endif
 556 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 557 #endif
 558 #endif
 559
 560 /*
 561  * for slave u-boot IMAGE instored in master memory space,
 562  * PHYS must be aligned based on the SIZE
 563  */
 564 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 565 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 566 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 567 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 568 /*
 569  * for slave UCODE and ENV instored in master memory space,
 570  * PHYS must be aligned based on the SIZE
 571  */
 572 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 573 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 574 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 575
 576 /* slave core release by master*/
 577 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 578 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 579
 580 /*
 581  * SRIO_PCIE_BOOT - SLAVE
 582  */
 583 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 584 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 585 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 586                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 587 #endif
 588
 589 /*
 590  * eSPI - Enhanced SPI
 591  */
 592 #define CONFIG_FSL_ESPI
 593 #define CONFIG_SPI_FLASH_SST
 594 #define CONFIG_CMD_SF
 595 #define CONFIG_SF_DEFAULT_SPEED         10000000
 596 #define CONFIG_SF_DEFAULT_MODE          0
 597
 598 /*
 599  * MAPLE
 600  */
 601 #ifdef CONFIG_PHYS_64BIT
 602 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xFA0000000ull
 603 #else
 604 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xA0000000
 605 #endif
 606
 607 /*
 608  * General PCI
 609  * Memory space is mapped 1-1, but I/O space must start from 0.
 610  */
 611
 612 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 613 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 614 #ifdef CONFIG_PHYS_64BIT
 615 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 616 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 617 #else
 618 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 619 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 620 #endif
 621 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 622 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 623 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 624 #ifdef CONFIG_PHYS_64BIT
 625 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 626 #else
 627 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 628 #endif
 629 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 630
 631 /* Qman/Bman */
 632 #ifndef CONFIG_NOBQFMAN
 633 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 634 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
 635 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 636 #ifdef CONFIG_PHYS_64BIT
 637 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 638 #else
 639 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 640 #endif
 641 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 642 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 643 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 644 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 645 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 646 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 647                                         CONFIG_SYS_BMAN_CENA_SIZE)
 648 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 649 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 650 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
 651 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 652 #ifdef CONFIG_PHYS_64BIT
 653 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 654 #else
 655 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 656 #endif
 657 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 658 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 659 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 660 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 661 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 662 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 663                                         CONFIG_SYS_QMAN_CENA_SIZE)
 664 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 665 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 666
 667 #define CONFIG_SYS_DPAA_FMAN
 668
 669 #define CONFIG_SYS_DPAA_RMAN
 670
 671 /* Default address of microcode for the Linux Fman driver */
 672 #if defined(CONFIG_SPIFLASH)
 673 /*
 674  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 675  * env, so we got 0x110000.
 676  */
 677 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 678 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 679 #elif defined(CONFIG_SDCARD)
 680 /*
 681  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 682  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
 683  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
 684  */
 685 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 686 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1130)
 687 #elif defined(CONFIG_NAND)
 688 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 689 #define CONFIG_SYS_FMAN_FW_ADDR (13 * CONFIG_SYS_NAND_BLOCK_SIZE)
 690 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 691 /*
 692  * Slave has no ucode locally, it can fetch this from remote. When implementing
 693  * in two corenet boards, slave's ucode could be stored in master's memory
 694  * space, the address can be mapped from slave TLB->slave LAW->
 695  * slave SRIO or PCIE outbound window->master inbound window->
 696  * master LAW->the ucode address in master's memory space.
 697  */
 698 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 699 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 700 #else
 701 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 702 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 703 #endif
 704 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 705 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 706 #endif /* CONFIG_NOBQFMAN */
 707
 708 #ifdef CONFIG_SYS_DPAA_FMAN
 709 #define CONFIG_FMAN_ENET
 710 #define CONFIG_PHYLIB_10G
 711 #define CONFIG_PHY_VITESSE
 712 #define CONFIG_PHY_TERANETICS
 713 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 714 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
 715 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 716 #define SGMII_CARD_PORT4_PHY_ADDR 0x11
 717 #endif
 718
 719 #ifdef CONFIG_PCI
 720 #define CONFIG_PCI_INDIRECT_BRIDGE
 721 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 722 #define CONFIG_E1000
 723
 724 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 725 #define CONFIG_DOS_PARTITION
 726 #endif  /* CONFIG_PCI */
 727
 728 #ifdef CONFIG_FMAN_ENET
 729 #define CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR 0x10
 730 #define CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR 0x11
 731
 732 /*B4860 QDS AMC2PEX-2S default PHY_ADDR */
 733 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7       /*SLOT 1*/
 734 #define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6       /*SLOT 2*/
 735
 736
 737 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 738 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 739 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 740 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 741
 742 #define CONFIG_MII              /* MII PHY management */
 743 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 744 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 745 #endif
 746
 747 #define CONFIG_SYS_FSL_B4860QDS_XFI_ERR
 748
 749 /*
 750  * Environment
 751  */
 752 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 753 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 754
 755 /*
 756  * Command line configuration.
 757  */
 758 #define CONFIG_CMD_DATE
 759 #define CONFIG_CMD_DHCP
 760 #define CONFIG_CMD_EEPROM
 761 #define CONFIG_CMD_ELF
 762 #define CONFIG_CMD_ERRATA
 763 #define CONFIG_CMD_GREPENV
 764 #define CONFIG_CMD_IRQ
 765 #define CONFIG_CMD_I2C
 766 #define CONFIG_CMD_MII
 767 #define CONFIG_CMD_PING
 768 #define CONFIG_CMD_REGINFO
 769
 770 #ifdef CONFIG_PCI
 771 #define CONFIG_CMD_PCI
 772 #endif
 773
 774 /* Hash command with SHA acceleration supported in hardware */
 775 #ifdef CONFIG_FSL_CAAM
 776 #define CONFIG_CMD_HASH
 777 #define CONFIG_SHA_HW_ACCEL
 778 #endif
 779
 780 /*
 781 * USB
 782 */
 783 #define CONFIG_HAS_FSL_DR_USB
 784
 785 #ifdef CONFIG_HAS_FSL_DR_USB
 786 #define CONFIG_USB_EHCI
 787
 788 #ifdef CONFIG_USB_EHCI
 789 #define CONFIG_CMD_USB
 790 #define CONFIG_USB_STORAGE
 791 #define CONFIG_USB_EHCI_FSL
 792 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 793 #define CONFIG_CMD_EXT2
 794 #endif
 795 #endif
 796
 797 /*
 798  * Miscellaneous configurable options
 799  */
 800 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 801 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 802 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 803 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 804 #ifdef CONFIG_CMD_KGDB
 805 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 806 #else
 807 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 808 #endif
 809 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 810 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 811 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 812
 813 /*
 814  * For booting Linux, the board info and command line data
 815  * have to be in the first 64 MB of memory, since this is
 816  * the maximum mapped by the Linux kernel during initialization.
 817  */
 818 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 819 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 820
 821 #ifdef CONFIG_CMD_KGDB
 822 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 823 #endif
 824
 825 /*
 826  * Environment Configuration
 827  */
 828 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 829 #define CONFIG_BOOTFILE         "uImage"
 830 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 831
 832 /* default location for tftp and bootm */
 833 #define CONFIG_LOADADDR         1000000
 834
 835 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 836
 837 #define CONFIG_BAUDRATE 115200
 838
 839 #define __USB_PHY_TYPE  ulpi
 840
 841 #ifdef CONFIG_PPC_B4860
 842 #define HWCONFIG        "hwconfig=fsl_ddr:ctlr_intlv=null,"     \
 843                         "bank_intlv=cs0_cs1;"   \
 844                         "en_cpc:cpc2;"
 845 #else
 846 #define HWCONFIG        "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;"
 847 #endif
 848
 849 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 850         HWCONFIG                                                \
 851         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 852         "netdev=eth0\0"                                         \
 853         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 854         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"                     \
 855         "tftpflash=tftpboot $loadaddr $uboot && "               \
 856         "protect off $ubootaddr +$filesize && "                 \
 857         "erase $ubootaddr +$filesize && "                       \
 858         "cp.b $loadaddr $ubootaddr $filesize && "               \
 859         "protect on $ubootaddr +$filesize && "                  \
 860         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 861         "consoledev=ttyS0\0"                                    \
 862         "ramdiskaddr=2000000\0"                                 \
 863         "ramdiskfile=b4860qds/ramdisk.uboot\0"                  \
 864         "fdtaddr=c00000\0"                                      \
 865         "fdtfile=b4860qds/b4860qds.dtb\0"                               \
 866         "bdev=sda3\0"
 867
 868 /* For emulation this causes u-boot to jump to the start of the proof point
 869    app code automatically */
 870 #define CONFIG_PROOF_POINTS                     \
 871  "setenv bootargs root=/dev/$bdev rw "          \
 872  "console=$consoledev,$baudrate $othbootargs;"  \
 873  "cpu 1 release 0x29000000 - - -;"              \
 874  "cpu 2 release 0x29000000 - - -;"              \
 875  "cpu 3 release 0x29000000 - - -;"              \
 876  "cpu 4 release 0x29000000 - - -;"              \
 877  "cpu 5 release 0x29000000 - - -;"              \
 878  "cpu 6 release 0x29000000 - - -;"              \
 879  "cpu 7 release 0x29000000 - - -;"              \
 880  "go 0x29000000"
 881
 882 #define CONFIG_HVBOOT   \
 883  "setenv bootargs config-addr=0x60000000; "     \
 884  "bootm 0x01000000 - 0x00f00000"
 885
 886 #define CONFIG_ALU                              \
 887  "setenv bootargs root=/dev/$bdev rw "          \
 888  "console=$consoledev,$baudrate $othbootargs;"  \
 889  "cpu 1 release 0x01000000 - - -;"              \
 890  "cpu 2 release 0x01000000 - - -;"              \
 891  "cpu 3 release 0x01000000 - - -;"              \
 892  "cpu 4 release 0x01000000 - - -;"              \
 893  "cpu 5 release 0x01000000 - - -;"              \
 894  "cpu 6 release 0x01000000 - - -;"              \
 895  "cpu 7 release 0x01000000 - - -;"              \
 896  "go 0x01000000"
 897
 898 #define CONFIG_LINUX                            \
 899  "setenv bootargs root=/dev/ram rw "            \
 900  "console=$consoledev,$baudrate $othbootargs;"  \
 901  "setenv ramdiskaddr 0x02000000;"               \
 902  "setenv fdtaddr 0x00c00000;"                   \
 903  "setenv loadaddr 0x1000000;"                   \
 904  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 905
 906 #define CONFIG_HDBOOT                                   \
 907         "setenv bootargs root=/dev/$bdev rw "           \
 908         "console=$consoledev,$baudrate $othbootargs;"   \
 909         "tftp $loadaddr $bootfile;"                     \
 910         "tftp $fdtaddr $fdtfile;"                       \
 911         "bootm $loadaddr - $fdtaddr"
 912
 913 #define CONFIG_NFSBOOTCOMMAND                   \
 914         "setenv bootargs root=/dev/nfs rw "     \
 915         "nfsroot=$serverip:$rootpath "          \
 916         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 917         "console=$consoledev,$baudrate $othbootargs;"   \
 918         "tftp $loadaddr $bootfile;"             \
 919         "tftp $fdtaddr $fdtfile;"               \
 920         "bootm $loadaddr - $fdtaddr"
 921
 922 #define CONFIG_RAMBOOTCOMMAND                           \
 923         "setenv bootargs root=/dev/ram rw "             \
 924         "console=$consoledev,$baudrate $othbootargs;"   \
 925         "tftp $ramdiskaddr $ramdiskfile;"               \
 926         "tftp $loadaddr $bootfile;"                     \
 927         "tftp $fdtaddr $fdtfile;"                       \
 928         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 929
 930 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 931
 932 #include <asm/fsl_secure_boot.h>
 933
 934 #ifdef CONFIG_SECURE_BOOT
 935 #define CONFIG_CMD_BLOB
 936 #endif
 937
 938 #endif  /* __CONFIG_H */