arch: powerpc: Move CONFIG_FSL_IFC to Kconfig
[platform/kernel/u-boot.git] / include / configs / B4860QDS.h
1 /*
2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 #ifndef __CONFIG_H
8 #define __CONFIG_H
9
10 /*
11  * B4860 QDS board configuration file
12  */
13 #ifdef CONFIG_RAMBOOT_PBL
14 #define CONFIG_SYS_FSL_PBL_PBI  $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg
15 #define CONFIG_SYS_FSL_PBL_RCW  $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg
16 #ifndef CONFIG_NAND
17 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
18 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
19 #else
20 #define CONFIG_SPL_FLUSH_IMAGE
21 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
22 #define CONFIG_SYS_TEXT_BASE            0x00201000
23 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
24 #define CONFIG_SPL_PAD_TO               0x40000
25 #define CONFIG_SPL_MAX_SIZE             0x28000
26 #define RESET_VECTOR_OFFSET             0x27FFC
27 #define BOOT_PAGE_OFFSET                0x27000
28 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
29 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
30 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
31 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
32 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
33 #define CONFIG_SPL_NAND_BOOT
34 #ifdef CONFIG_SPL_BUILD
35 #define CONFIG_SPL_SKIP_RELOCATE
36 #define CONFIG_SPL_COMMON_INIT_DDR
37 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
38 #define CONFIG_SYS_NO_FLASH
39 #endif
40 #endif
41 #endif
42
43 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
44 /* Set 1M boot space */
45 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
46 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
47                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
48 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
49 #define CONFIG_SYS_NO_FLASH
50 #endif
51
52 /* High Level Configuration Options */
53 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
54 #define CONFIG_MP                       /* support multiple processors */
55
56 #ifndef CONFIG_SYS_TEXT_BASE
57 #define CONFIG_SYS_TEXT_BASE    0xeff40000
58 #endif
59
60 #ifndef CONFIG_RESET_VECTOR_ADDRESS
61 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
62 #endif
63
64 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
65 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
66 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
67 #define CONFIG_PCIE1                    /* PCIE controller 1 */
68 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
69 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
70
71 #ifndef CONFIG_ARCH_B4420
72 #define CONFIG_SYS_SRIO
73 #define CONFIG_SRIO1                    /* SRIO port 1 */
74 #define CONFIG_SRIO2                    /* SRIO port 2 */
75 #define CONFIG_SRIO_PCIE_BOOT_MASTER
76 #endif
77
78 /* I2C bus multiplexer */
79 #define I2C_MUX_PCA_ADDR                0x77
80
81 /* VSC Crossbar switches */
82 #define CONFIG_VSC_CROSSBAR
83 #define I2C_CH_DEFAULT                  0x8
84 #define I2C_CH_VSC3316                  0xc
85 #define I2C_CH_VSC3308                  0xd
86
87 #define VSC3316_TX_ADDRESS              0x70
88 #define VSC3316_RX_ADDRESS              0x71
89 #define VSC3308_TX_ADDRESS              0x02
90 #define VSC3308_RX_ADDRESS              0x03
91
92 /* IDT clock synthesizers */
93 #define CONFIG_IDT8T49N222A
94 #define I2C_CH_IDT                     0x9
95
96 #define IDT_SERDES1_ADDRESS            0x6E
97 #define IDT_SERDES2_ADDRESS            0x6C
98
99 /* Voltage monitor on channel 2*/
100 #define I2C_MUX_CH_VOL_MONITOR          0xa
101 #define I2C_VOL_MONITOR_ADDR            0x40
102 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
103 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
104 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
105
106 #define CONFIG_ZM7300
107 #define I2C_MUX_CH_DPM                  0xa
108 #define I2C_DPM_ADDR                    0x28
109
110 #define CONFIG_ENV_OVERWRITE
111
112 #ifdef CONFIG_SYS_NO_FLASH
113 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
114 #define CONFIG_ENV_IS_NOWHERE
115 #endif
116 #else
117 #define CONFIG_FLASH_CFI_DRIVER
118 #define CONFIG_SYS_FLASH_CFI
119 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
120 #endif
121
122 #if defined(CONFIG_SPIFLASH)
123 #define CONFIG_SYS_EXTRA_ENV_RELOC
124 #define CONFIG_ENV_IS_IN_SPI_FLASH
125 #define CONFIG_ENV_SPI_BUS              0
126 #define CONFIG_ENV_SPI_CS               0
127 #define CONFIG_ENV_SPI_MAX_HZ           10000000
128 #define CONFIG_ENV_SPI_MODE             0
129 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
130 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
131 #define CONFIG_ENV_SECT_SIZE            0x10000
132 #elif defined(CONFIG_SDCARD)
133 #define CONFIG_SYS_EXTRA_ENV_RELOC
134 #define CONFIG_ENV_IS_IN_MMC
135 #define CONFIG_SYS_MMC_ENV_DEV          0
136 #define CONFIG_ENV_SIZE                 0x2000
137 #define CONFIG_ENV_OFFSET               (512 * 1097)
138 #elif defined(CONFIG_NAND)
139 #define CONFIG_SYS_EXTRA_ENV_RELOC
140 #define CONFIG_ENV_IS_IN_NAND
141 #define CONFIG_ENV_SIZE                 0x2000
142 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
143 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
144 #define CONFIG_ENV_IS_IN_REMOTE
145 #define CONFIG_ENV_ADDR         0xffe20000
146 #define CONFIG_ENV_SIZE         0x2000
147 #elif defined(CONFIG_ENV_IS_NOWHERE)
148 #define CONFIG_ENV_SIZE         0x2000
149 #else
150 #define CONFIG_ENV_IS_IN_FLASH
151 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
152 #define CONFIG_ENV_SIZE         0x2000
153 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
154 #endif
155
156 #ifndef __ASSEMBLY__
157 unsigned long get_board_sys_clk(void);
158 unsigned long get_board_ddr_clk(void);
159 #endif
160 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
161 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
162
163 /*
164  * These can be toggled for performance analysis, otherwise use default.
165  */
166 #define CONFIG_SYS_CACHE_STASHING
167 #define CONFIG_BTB                      /* toggle branch predition */
168 #define CONFIG_DDR_ECC
169 #ifdef CONFIG_DDR_ECC
170 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
171 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
172 #endif
173
174 #define CONFIG_ENABLE_36BIT_PHYS
175
176 #ifdef CONFIG_PHYS_64BIT
177 #define CONFIG_ADDR_MAP
178 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
179 #endif
180
181 #if 0
182 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
183 #endif
184 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
185 #define CONFIG_SYS_MEMTEST_END          0x00400000
186 #define CONFIG_SYS_ALT_MEMTEST
187 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
188
189 /*
190  *  Config the L3 Cache as L3 SRAM
191  */
192 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
193 #define CONFIG_SYS_L3_SIZE              256 << 10
194 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
195 #ifdef CONFIG_NAND
196 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
197 #endif
198 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
199 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
200 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
201 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
202
203 #ifdef CONFIG_PHYS_64BIT
204 #define CONFIG_SYS_DCSRBAR              0xf0000000
205 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
206 #endif
207
208 /* EEPROM */
209 #define CONFIG_ID_EEPROM
210 #define CONFIG_SYS_I2C_EEPROM_NXID
211 #define CONFIG_SYS_EEPROM_BUS_NUM       0
212 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
213 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
214 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
215 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
216
217 /*
218  * DDR Setup
219  */
220 #define CONFIG_VERY_BIG_RAM
221 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
222 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
223
224 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
225 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
226
227 #define CONFIG_DDR_SPD
228 #define CONFIG_SYS_DDR_RAW_TIMING
229 #ifndef CONFIG_SPL_BUILD
230 #define CONFIG_FSL_DDR_INTERACTIVE
231 #endif
232
233 #define CONFIG_SYS_SPD_BUS_NUM  0
234 #define SPD_EEPROM_ADDRESS1     0x51
235 #define SPD_EEPROM_ADDRESS2     0x53
236
237 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
238 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
239
240 /*
241  * IFC Definitions
242  */
243 #define CONFIG_SYS_FLASH_BASE   0xe0000000
244 #ifdef CONFIG_PHYS_64BIT
245 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
246 #else
247 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
248 #endif
249
250 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
251 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
252                                 + 0x8000000) | \
253                                 CSPR_PORT_SIZE_16 | \
254                                 CSPR_MSEL_NOR | \
255                                 CSPR_V)
256 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
257 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
258                                 CSPR_PORT_SIZE_16 | \
259                                 CSPR_MSEL_NOR | \
260                                 CSPR_V)
261 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128 * 1024 * 1024)
262 /* NOR Flash Timing Params */
263 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(4)
264 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) | \
265                                 FTIM0_NOR_TEADC(0x04) | \
266                                 FTIM0_NOR_TEAHC(0x20))
267 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
268                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
269                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
270 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x01) | \
271                                 FTIM2_NOR_TCH(0x0E) | \
272                                 FTIM2_NOR_TWPH(0x0E) | \
273                                 FTIM2_NOR_TWP(0x1c))
274 #define CONFIG_SYS_NOR_FTIM3    0x0
275
276 #define CONFIG_SYS_FLASH_QUIET_TEST
277 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
278
279 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
280 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
281 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
282 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
283
284 #define CONFIG_SYS_FLASH_EMPTY_INFO
285 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
286                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
287
288 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
289 #define CONFIG_FSL_QIXIS_V2
290 #define QIXIS_BASE              0xffdf0000
291 #ifdef CONFIG_PHYS_64BIT
292 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
293 #else
294 #define QIXIS_BASE_PHYS         QIXIS_BASE
295 #endif
296 #define QIXIS_LBMAP_SWITCH              0x01
297 #define QIXIS_LBMAP_MASK                0x0f
298 #define QIXIS_LBMAP_SHIFT               0
299 #define QIXIS_LBMAP_DFLTBANK            0x00
300 #define QIXIS_LBMAP_ALTBANK             0x02
301 #define QIXIS_RST_CTL_RESET             0x31
302 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
303 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
304 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
305
306 #define CONFIG_SYS_CSPR3_EXT    (0xf)
307 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
308                                 | CSPR_PORT_SIZE_8 \
309                                 | CSPR_MSEL_GPCM \
310                                 | CSPR_V)
311 #define CONFIG_SYS_AMASK3       IFC_AMASK(4 * 1024)
312 #define CONFIG_SYS_CSOR3        0x0
313 /* QIXIS Timing parameters for IFC CS3 */
314 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
315                                         FTIM0_GPCM_TEADC(0x0e) | \
316                                         FTIM0_GPCM_TEAHC(0x0e))
317 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
318                                         FTIM1_GPCM_TRAD(0x1f))
319 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
320                                         FTIM2_GPCM_TCH(0x8) | \
321                                         FTIM2_GPCM_TWP(0x1f))
322 #define CONFIG_SYS_CS3_FTIM3            0x0
323
324 /* NAND Flash on IFC */
325 #define CONFIG_NAND_FSL_IFC
326 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
327 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
328 #define CONFIG_SYS_NAND_BASE            0xff800000
329 #ifdef CONFIG_PHYS_64BIT
330 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
331 #else
332 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
333 #endif
334
335 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
336 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
337                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
338                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
339                                 | CSPR_V)
340 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
341
342 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
343                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
344                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
345                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
346                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
347                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
348                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
349
350 #define CONFIG_SYS_NAND_ONFI_DETECTION
351
352 /* ONFI NAND Flash mode0 Timing Params */
353 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
354                                         FTIM0_NAND_TWP(0x18)   | \
355                                         FTIM0_NAND_TWCHT(0x07) | \
356                                         FTIM0_NAND_TWH(0x0a))
357 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
358                                         FTIM1_NAND_TWBE(0x39)  | \
359                                         FTIM1_NAND_TRR(0x0e)   | \
360                                         FTIM1_NAND_TRP(0x18))
361 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
362                                         FTIM2_NAND_TREH(0x0a) | \
363                                         FTIM2_NAND_TWHRE(0x1e))
364 #define CONFIG_SYS_NAND_FTIM3           0x0
365
366 #define CONFIG_SYS_NAND_DDR_LAW         11
367
368 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
369 #define CONFIG_SYS_MAX_NAND_DEVICE      1
370 #define CONFIG_CMD_NAND
371
372 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
373
374 #if defined(CONFIG_NAND)
375 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
376 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
377 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
378 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
379 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
380 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
381 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
382 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
383 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
384 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
385 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
386 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
387 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
388 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
389 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
390 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
391 #else
392 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
393 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
394 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
395 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
396 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
397 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
398 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
399 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
400 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
401 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
402 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
403 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
404 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
405 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
406 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
407 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
408 #endif
409 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
410 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
411 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
412 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
413 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
414 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
415 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
416 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
417
418 #ifdef CONFIG_SPL_BUILD
419 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
420 #else
421 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
422 #endif
423
424 #if defined(CONFIG_RAMBOOT_PBL)
425 #define CONFIG_SYS_RAMBOOT
426 #endif
427
428 #define CONFIG_BOARD_EARLY_INIT_R
429 #define CONFIG_MISC_INIT_R
430
431 #define CONFIG_HWCONFIG
432
433 /* define to use L1 as initial stack */
434 #define CONFIG_L1_INIT_RAM
435 #define CONFIG_SYS_INIT_RAM_LOCK
436 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
437 #ifdef CONFIG_PHYS_64BIT
438 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
439 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
440 /* The assembler doesn't like typecast */
441 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
442         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
443           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
444 #else
445 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
446 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
447 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
448 #endif
449 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
450
451 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
452                                         GENERATED_GBL_DATA_SIZE)
453 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
454
455 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
456 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
457
458 /* Serial Port - controlled on board with jumper J8
459  * open - index 2
460  * shorted - index 1
461  */
462 #define CONFIG_CONS_INDEX       1
463 #define CONFIG_SYS_NS16550_SERIAL
464 #define CONFIG_SYS_NS16550_REG_SIZE     1
465 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
466
467 #define CONFIG_SYS_BAUDRATE_TABLE       \
468         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
469
470 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
471 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
472 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
473 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
474
475 /* I2C */
476 #define CONFIG_SYS_I2C
477 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
478 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
479 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
480 #define CONFIG_SYS_FSL_I2C2_SPEED       400000  /* I2C speed in Hz */
481 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
482 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
483 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x119000
484
485 /*
486  * RTC configuration
487  */
488 #define RTC
489 #define CONFIG_RTC_DS3231               1
490 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
491
492 /*
493  * RapidIO
494  */
495 #ifdef CONFIG_SYS_SRIO
496 #ifdef CONFIG_SRIO1
497 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
498 #ifdef CONFIG_PHYS_64BIT
499 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
500 #else
501 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
502 #endif
503 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
504 #endif
505
506 #ifdef CONFIG_SRIO2
507 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
508 #ifdef CONFIG_PHYS_64BIT
509 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
510 #else
511 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
512 #endif
513 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
514 #endif
515 #endif
516
517 /*
518  * for slave u-boot IMAGE instored in master memory space,
519  * PHYS must be aligned based on the SIZE
520  */
521 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
522 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
523 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
524 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
525 /*
526  * for slave UCODE and ENV instored in master memory space,
527  * PHYS must be aligned based on the SIZE
528  */
529 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
530 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
531 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
532
533 /* slave core release by master*/
534 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
535 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
536
537 /*
538  * SRIO_PCIE_BOOT - SLAVE
539  */
540 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
541 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
542 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
543                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
544 #endif
545
546 /*
547  * eSPI - Enhanced SPI
548  */
549 #define CONFIG_SF_DEFAULT_SPEED         10000000
550 #define CONFIG_SF_DEFAULT_MODE          0
551
552 /*
553  * MAPLE
554  */
555 #ifdef CONFIG_PHYS_64BIT
556 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xFA0000000ull
557 #else
558 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xA0000000
559 #endif
560
561 /*
562  * General PCI
563  * Memory space is mapped 1-1, but I/O space must start from 0.
564  */
565
566 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
567 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
568 #ifdef CONFIG_PHYS_64BIT
569 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
570 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
571 #else
572 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
573 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
574 #endif
575 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
576 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
577 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
578 #ifdef CONFIG_PHYS_64BIT
579 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
580 #else
581 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
582 #endif
583 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
584
585 /* Qman/Bman */
586 #ifndef CONFIG_NOBQFMAN
587 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
588 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
589 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
590 #ifdef CONFIG_PHYS_64BIT
591 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
592 #else
593 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
594 #endif
595 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
596 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
597 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
598 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
599 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
600 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
601                                         CONFIG_SYS_BMAN_CENA_SIZE)
602 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
603 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
604 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
605 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
606 #ifdef CONFIG_PHYS_64BIT
607 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
608 #else
609 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
610 #endif
611 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
612 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
613 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
614 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
615 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
616 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
617                                         CONFIG_SYS_QMAN_CENA_SIZE)
618 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
619 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
620
621 #define CONFIG_SYS_DPAA_FMAN
622
623 #define CONFIG_SYS_DPAA_RMAN
624
625 /* Default address of microcode for the Linux Fman driver */
626 #if defined(CONFIG_SPIFLASH)
627 /*
628  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
629  * env, so we got 0x110000.
630  */
631 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
632 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
633 #elif defined(CONFIG_SDCARD)
634 /*
635  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
636  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
637  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
638  */
639 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
640 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1130)
641 #elif defined(CONFIG_NAND)
642 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
643 #define CONFIG_SYS_FMAN_FW_ADDR (13 * CONFIG_SYS_NAND_BLOCK_SIZE)
644 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
645 /*
646  * Slave has no ucode locally, it can fetch this from remote. When implementing
647  * in two corenet boards, slave's ucode could be stored in master's memory
648  * space, the address can be mapped from slave TLB->slave LAW->
649  * slave SRIO or PCIE outbound window->master inbound window->
650  * master LAW->the ucode address in master's memory space.
651  */
652 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
653 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
654 #else
655 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
656 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
657 #endif
658 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
659 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
660 #endif /* CONFIG_NOBQFMAN */
661
662 #ifdef CONFIG_SYS_DPAA_FMAN
663 #define CONFIG_FMAN_ENET
664 #define CONFIG_PHYLIB_10G
665 #define CONFIG_PHY_VITESSE
666 #define CONFIG_PHY_TERANETICS
667 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
668 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
669 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
670 #define SGMII_CARD_PORT4_PHY_ADDR 0x11
671 #endif
672
673 #ifdef CONFIG_PCI
674 #define CONFIG_PCI_INDIRECT_BRIDGE
675
676 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
677 #define CONFIG_DOS_PARTITION
678 #endif  /* CONFIG_PCI */
679
680 #ifdef CONFIG_FMAN_ENET
681 #define CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR 0x10
682 #define CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR 0x11
683
684 /*B4860 QDS AMC2PEX-2S default PHY_ADDR */
685 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7       /*SLOT 1*/
686 #define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6       /*SLOT 2*/
687
688 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
689 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
690 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
691 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
692
693 #define CONFIG_MII              /* MII PHY management */
694 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
695 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
696 #endif
697
698 #define CONFIG_SYS_FSL_B4860QDS_XFI_ERR
699
700 /*
701  * Environment
702  */
703 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
704 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
705
706 /*
707  * Command line configuration.
708  */
709 #define CONFIG_CMD_DATE
710 #define CONFIG_CMD_EEPROM
711 #define CONFIG_CMD_ERRATA
712 #define CONFIG_CMD_IRQ
713 #define CONFIG_CMD_REGINFO
714
715 #ifdef CONFIG_PCI
716 #define CONFIG_CMD_PCI
717 #endif
718
719 /* Hash command with SHA acceleration supported in hardware */
720 #ifdef CONFIG_FSL_CAAM
721 #define CONFIG_CMD_HASH
722 #define CONFIG_SHA_HW_ACCEL
723 #endif
724
725 /*
726 * USB
727 */
728 #define CONFIG_HAS_FSL_DR_USB
729
730 #ifdef CONFIG_HAS_FSL_DR_USB
731 #define CONFIG_USB_EHCI
732
733 #ifdef CONFIG_USB_EHCI
734 #define CONFIG_USB_EHCI_FSL
735 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
736 #endif
737 #endif
738
739 /*
740  * Miscellaneous configurable options
741  */
742 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
743 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
744 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
745 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
746 #ifdef CONFIG_CMD_KGDB
747 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
748 #else
749 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
750 #endif
751 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
752 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
753 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
754
755 /*
756  * For booting Linux, the board info and command line data
757  * have to be in the first 64 MB of memory, since this is
758  * the maximum mapped by the Linux kernel during initialization.
759  */
760 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
761 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
762
763 #ifdef CONFIG_CMD_KGDB
764 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
765 #endif
766
767 /*
768  * Environment Configuration
769  */
770 #define CONFIG_ROOTPATH         "/opt/nfsroot"
771 #define CONFIG_BOOTFILE         "uImage"
772 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
773
774 /* default location for tftp and bootm */
775 #define CONFIG_LOADADDR         1000000
776
777
778 #define CONFIG_BAUDRATE 115200
779
780 #define __USB_PHY_TYPE  ulpi
781
782 #ifdef CONFIG_ARCH_B4860
783 #define HWCONFIG        "hwconfig=fsl_ddr:ctlr_intlv=null,"     \
784                         "bank_intlv=cs0_cs1;"   \
785                         "en_cpc:cpc2;"
786 #else
787 #define HWCONFIG        "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;"
788 #endif
789
790 #define CONFIG_EXTRA_ENV_SETTINGS                               \
791         HWCONFIG                                                \
792         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
793         "netdev=eth0\0"                                         \
794         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
795         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"                     \
796         "tftpflash=tftpboot $loadaddr $uboot && "               \
797         "protect off $ubootaddr +$filesize && "                 \
798         "erase $ubootaddr +$filesize && "                       \
799         "cp.b $loadaddr $ubootaddr $filesize && "               \
800         "protect on $ubootaddr +$filesize && "                  \
801         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
802         "consoledev=ttyS0\0"                                    \
803         "ramdiskaddr=2000000\0"                                 \
804         "ramdiskfile=b4860qds/ramdisk.uboot\0"                  \
805         "fdtaddr=1e00000\0"                                     \
806         "fdtfile=b4860qds/b4860qds.dtb\0"                               \
807         "bdev=sda3\0"
808
809 /* For emulation this causes u-boot to jump to the start of the proof point
810    app code automatically */
811 #define CONFIG_PROOF_POINTS                     \
812  "setenv bootargs root=/dev/$bdev rw "          \
813  "console=$consoledev,$baudrate $othbootargs;"  \
814  "cpu 1 release 0x29000000 - - -;"              \
815  "cpu 2 release 0x29000000 - - -;"              \
816  "cpu 3 release 0x29000000 - - -;"              \
817  "cpu 4 release 0x29000000 - - -;"              \
818  "cpu 5 release 0x29000000 - - -;"              \
819  "cpu 6 release 0x29000000 - - -;"              \
820  "cpu 7 release 0x29000000 - - -;"              \
821  "go 0x29000000"
822
823 #define CONFIG_HVBOOT   \
824  "setenv bootargs config-addr=0x60000000; "     \
825  "bootm 0x01000000 - 0x00f00000"
826
827 #define CONFIG_ALU                              \
828  "setenv bootargs root=/dev/$bdev rw "          \
829  "console=$consoledev,$baudrate $othbootargs;"  \
830  "cpu 1 release 0x01000000 - - -;"              \
831  "cpu 2 release 0x01000000 - - -;"              \
832  "cpu 3 release 0x01000000 - - -;"              \
833  "cpu 4 release 0x01000000 - - -;"              \
834  "cpu 5 release 0x01000000 - - -;"              \
835  "cpu 6 release 0x01000000 - - -;"              \
836  "cpu 7 release 0x01000000 - - -;"              \
837  "go 0x01000000"
838
839 #define CONFIG_LINUX                            \
840  "setenv bootargs root=/dev/ram rw "            \
841  "console=$consoledev,$baudrate $othbootargs;"  \
842  "setenv ramdiskaddr 0x02000000;"               \
843  "setenv fdtaddr 0x01e00000;"                   \
844  "setenv loadaddr 0x1000000;"                   \
845  "bootm $loadaddr $ramdiskaddr $fdtaddr"
846
847 #define CONFIG_HDBOOT                                   \
848         "setenv bootargs root=/dev/$bdev rw "           \
849         "console=$consoledev,$baudrate $othbootargs;"   \
850         "tftp $loadaddr $bootfile;"                     \
851         "tftp $fdtaddr $fdtfile;"                       \
852         "bootm $loadaddr - $fdtaddr"
853
854 #define CONFIG_NFSBOOTCOMMAND                   \
855         "setenv bootargs root=/dev/nfs rw "     \
856         "nfsroot=$serverip:$rootpath "          \
857         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
858         "console=$consoledev,$baudrate $othbootargs;"   \
859         "tftp $loadaddr $bootfile;"             \
860         "tftp $fdtaddr $fdtfile;"               \
861         "bootm $loadaddr - $fdtaddr"
862
863 #define CONFIG_RAMBOOTCOMMAND                           \
864         "setenv bootargs root=/dev/ram rw "             \
865         "console=$consoledev,$baudrate $othbootargs;"   \
866         "tftp $ramdiskaddr $ramdiskfile;"               \
867         "tftp $loadaddr $bootfile;"                     \
868         "tftp $fdtaddr $fdtfile;"                       \
869         "bootm $loadaddr $ramdiskaddr $fdtaddr"
870
871 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
872
873 #include <asm/fsl_secure_boot.h>
874
875 #endif  /* __CONFIG_H */