include/configs/B4860QDS.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_DISPLAY_BOARDINFO
  11
  12 /*
  13  * B4860 QDS board configuration file
  14  */
  15 #define CONFIG_B4860QDS
  16
  17 #ifdef CONFIG_RAMBOOT_PBL
  18 #define CONFIG_SYS_FSL_PBL_PBI  $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg
  19 #define CONFIG_SYS_FSL_PBL_RCW  $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg
  20 #ifndef CONFIG_NAND
  21 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  22 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  23 #else
  24 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  25 #define CONFIG_SPL_ENV_SUPPORT
  26 #define CONFIG_SPL_SERIAL_SUPPORT
  27 #define CONFIG_SPL_FLUSH_IMAGE
  28 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  29 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  30 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  31 #define CONFIG_SPL_I2C_SUPPORT
  32 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  33 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  34 #define CONFIG_SYS_TEXT_BASE            0x00201000
  35 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  36 #define CONFIG_SPL_PAD_TO               0x40000
  37 #define CONFIG_SPL_MAX_SIZE             0x28000
  38 #define RESET_VECTOR_OFFSET             0x27FFC
  39 #define BOOT_PAGE_OFFSET                0x27000
  40 #define CONFIG_SPL_NAND_SUPPORT
  41 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  42 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  43 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  44 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  45 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  46 #define CONFIG_SPL_NAND_BOOT
  47 #ifdef CONFIG_SPL_BUILD
  48 #define CONFIG_SPL_SKIP_RELOCATE
  49 #define CONFIG_SPL_COMMON_INIT_DDR
  50 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  51 #define CONFIG_SYS_NO_FLASH
  52 #endif
  53 #endif
  54 #endif
  55
  56 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  57 /* Set 1M boot space */
  58 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  59 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  60                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  61 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  62 #define CONFIG_SYS_NO_FLASH
  63 #endif
  64
  65 /* High Level Configuration Options */
  66 #define CONFIG_BOOKE
  67 #define CONFIG_E500                     /* BOOKE e500 family */
  68 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  69 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  70 #define CONFIG_MP                       /* support multiple processors */
  71
  72 #ifndef CONFIG_SYS_TEXT_BASE
  73 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  74 #endif
  75
  76 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  77 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  78 #endif
  79
  80 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  81 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  82 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  83 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  84 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  85 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  86 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  87 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  88
  89 #ifndef CONFIG_PPC_B4420
  90 #define CONFIG_SYS_SRIO
  91 #define CONFIG_SRIO1                    /* SRIO port 1 */
  92 #define CONFIG_SRIO2                    /* SRIO port 2 */
  93 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  94 #endif
  95
  96 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  97
  98 /* I2C bus multiplexer */
  99 #define I2C_MUX_PCA_ADDR                0x77
 100
 101 /* VSC Crossbar switches */
 102 #define CONFIG_VSC_CROSSBAR
 103 #define I2C_CH_DEFAULT                  0x8
 104 #define I2C_CH_VSC3316                  0xc
 105 #define I2C_CH_VSC3308                  0xd
 106
 107 #define VSC3316_TX_ADDRESS              0x70
 108 #define VSC3316_RX_ADDRESS              0x71
 109 #define VSC3308_TX_ADDRESS              0x02
 110 #define VSC3308_RX_ADDRESS              0x03
 111
 112 /* IDT clock synthesizers */
 113 #define CONFIG_IDT8T49N222A
 114 #define I2C_CH_IDT                     0x9
 115
 116 #define IDT_SERDES1_ADDRESS            0x6E
 117 #define IDT_SERDES2_ADDRESS            0x6C
 118
 119 /* Voltage monitor on channel 2*/
 120 #define I2C_MUX_CH_VOL_MONITOR          0xa
 121 #define I2C_VOL_MONITOR_ADDR            0x40
 122 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 123 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 124 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 125
 126 #define CONFIG_ZM7300
 127 #define I2C_MUX_CH_DPM                  0xa
 128 #define I2C_DPM_ADDR                    0x28
 129
 130 #define CONFIG_ENV_OVERWRITE
 131
 132 #ifdef CONFIG_SYS_NO_FLASH
 133 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
 134 #define CONFIG_ENV_IS_NOWHERE
 135 #endif
 136 #else
 137 #define CONFIG_FLASH_CFI_DRIVER
 138 #define CONFIG_SYS_FLASH_CFI
 139 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 140 #endif
 141
 142 #if defined(CONFIG_SPIFLASH)
 143 #define CONFIG_SYS_EXTRA_ENV_RELOC
 144 #define CONFIG_ENV_IS_IN_SPI_FLASH
 145 #define CONFIG_ENV_SPI_BUS              0
 146 #define CONFIG_ENV_SPI_CS               0
 147 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 148 #define CONFIG_ENV_SPI_MODE             0
 149 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 150 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 151 #define CONFIG_ENV_SECT_SIZE            0x10000
 152 #elif defined(CONFIG_SDCARD)
 153 #define CONFIG_SYS_EXTRA_ENV_RELOC
 154 #define CONFIG_ENV_IS_IN_MMC
 155 #define CONFIG_SYS_MMC_ENV_DEV          0
 156 #define CONFIG_ENV_SIZE                 0x2000
 157 #define CONFIG_ENV_OFFSET               (512 * 1097)
 158 #elif defined(CONFIG_NAND)
 159 #define CONFIG_SYS_EXTRA_ENV_RELOC
 160 #define CONFIG_ENV_IS_IN_NAND
 161 #define CONFIG_ENV_SIZE                 0x2000
 162 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 163 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 164 #define CONFIG_ENV_IS_IN_REMOTE
 165 #define CONFIG_ENV_ADDR         0xffe20000
 166 #define CONFIG_ENV_SIZE         0x2000
 167 #elif defined(CONFIG_ENV_IS_NOWHERE)
 168 #define CONFIG_ENV_SIZE         0x2000
 169 #else
 170 #define CONFIG_ENV_IS_IN_FLASH
 171 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 172 #define CONFIG_ENV_SIZE         0x2000
 173 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 174 #endif
 175
 176 #ifndef __ASSEMBLY__
 177 unsigned long get_board_sys_clk(void);
 178 unsigned long get_board_ddr_clk(void);
 179 #endif
 180 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 181 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 182
 183 /*
 184  * These can be toggled for performance analysis, otherwise use default.
 185  */
 186 #define CONFIG_SYS_CACHE_STASHING
 187 #define CONFIG_BTB                      /* toggle branch predition */
 188 #define CONFIG_DDR_ECC
 189 #ifdef CONFIG_DDR_ECC
 190 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 191 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 192 #endif
 193
 194 #define CONFIG_ENABLE_36BIT_PHYS
 195
 196 #ifdef CONFIG_PHYS_64BIT
 197 #define CONFIG_ADDR_MAP
 198 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 199 #endif
 200
 201 #if 0
 202 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 203 #endif
 204 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 205 #define CONFIG_SYS_MEMTEST_END          0x00400000
 206 #define CONFIG_SYS_ALT_MEMTEST
 207 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 208
 209 /*
 210  *  Config the L3 Cache as L3 SRAM
 211  */
 212 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 213 #define CONFIG_SYS_L3_SIZE              256 << 10
 214 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 215 #ifdef CONFIG_NAND
 216 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 217 #endif
 218 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 219 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 220 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 221 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 222
 223 #ifdef CONFIG_PHYS_64BIT
 224 #define CONFIG_SYS_DCSRBAR              0xf0000000
 225 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 226 #endif
 227
 228 /* EEPROM */
 229 #define CONFIG_ID_EEPROM
 230 #define CONFIG_SYS_I2C_EEPROM_NXID
 231 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 232 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 233 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 234 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 235 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 236
 237 /*
 238  * DDR Setup
 239  */
 240 #define CONFIG_VERY_BIG_RAM
 241 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 242 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 243
 244 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 245 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 246 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 247
 248 #define CONFIG_DDR_SPD
 249 #define CONFIG_SYS_DDR_RAW_TIMING
 250 #define CONFIG_SYS_FSL_DDR3
 251 #ifndef CONFIG_SPL_BUILD
 252 #define CONFIG_FSL_DDR_INTERACTIVE
 253 #endif
 254
 255 #define CONFIG_SYS_SPD_BUS_NUM  0
 256 #define SPD_EEPROM_ADDRESS1     0x51
 257 #define SPD_EEPROM_ADDRESS2     0x53
 258
 259 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 260 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 261
 262 /*
 263  * IFC Definitions
 264  */
 265 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 266 #ifdef CONFIG_PHYS_64BIT
 267 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 268 #else
 269 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 270 #endif
 271
 272 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 273 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 274                                 + 0x8000000) | \
 275                                 CSPR_PORT_SIZE_16 | \
 276                                 CSPR_MSEL_NOR | \
 277                                 CSPR_V)
 278 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 279 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 280                                 CSPR_PORT_SIZE_16 | \
 281                                 CSPR_MSEL_NOR | \
 282                                 CSPR_V)
 283 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128 * 1024 * 1024)
 284 /* NOR Flash Timing Params */
 285 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(4)
 286 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) | \
 287                                 FTIM0_NOR_TEADC(0x04) | \
 288                                 FTIM0_NOR_TEAHC(0x20))
 289 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 290                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 291                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 292 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x01) | \
 293                                 FTIM2_NOR_TCH(0x0E) | \
 294                                 FTIM2_NOR_TWPH(0x0E) | \
 295                                 FTIM2_NOR_TWP(0x1c))
 296 #define CONFIG_SYS_NOR_FTIM3    0x0
 297
 298 #define CONFIG_SYS_FLASH_QUIET_TEST
 299 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 300
 301 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 302 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 303 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 304 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 305
 306 #define CONFIG_SYS_FLASH_EMPTY_INFO
 307 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 308                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 309
 310 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 311 #define CONFIG_FSL_QIXIS_V2
 312 #define QIXIS_BASE              0xffdf0000
 313 #ifdef CONFIG_PHYS_64BIT
 314 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 315 #else
 316 #define QIXIS_BASE_PHYS         QIXIS_BASE
 317 #endif
 318 #define QIXIS_LBMAP_SWITCH              0x01
 319 #define QIXIS_LBMAP_MASK                0x0f
 320 #define QIXIS_LBMAP_SHIFT               0
 321 #define QIXIS_LBMAP_DFLTBANK            0x00
 322 #define QIXIS_LBMAP_ALTBANK             0x02
 323 #define QIXIS_RST_CTL_RESET             0x31
 324 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 325 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 326 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 327
 328 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 329 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 330                                 | CSPR_PORT_SIZE_8 \
 331                                 | CSPR_MSEL_GPCM \
 332                                 | CSPR_V)
 333 #define CONFIG_SYS_AMASK3       IFC_AMASK(4 * 1024)
 334 #define CONFIG_SYS_CSOR3        0x0
 335 /* QIXIS Timing parameters for IFC CS3 */
 336 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 337                                         FTIM0_GPCM_TEADC(0x0e) | \
 338                                         FTIM0_GPCM_TEAHC(0x0e))
 339 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 340                                         FTIM1_GPCM_TRAD(0x1f))
 341 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 342                                         FTIM2_GPCM_TCH(0x8) | \
 343                                         FTIM2_GPCM_TWP(0x1f))
 344 #define CONFIG_SYS_CS3_FTIM3            0x0
 345
 346 /* NAND Flash on IFC */
 347 #define CONFIG_NAND_FSL_IFC
 348 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 349 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 350 #define CONFIG_SYS_NAND_BASE            0xff800000
 351 #ifdef CONFIG_PHYS_64BIT
 352 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 353 #else
 354 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 355 #endif
 356
 357 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 358 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 359                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 360                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 361                                 | CSPR_V)
 362 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
 363
 364 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 365                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 366                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 367                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 368                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 369                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 370                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 371
 372 #define CONFIG_SYS_NAND_ONFI_DETECTION
 373
 374 /* ONFI NAND Flash mode0 Timing Params */
 375 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 376                                         FTIM0_NAND_TWP(0x18)   | \
 377                                         FTIM0_NAND_TWCHT(0x07) | \
 378                                         FTIM0_NAND_TWH(0x0a))
 379 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 380                                         FTIM1_NAND_TWBE(0x39)  | \
 381                                         FTIM1_NAND_TRR(0x0e)   | \
 382                                         FTIM1_NAND_TRP(0x18))
 383 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 384                                         FTIM2_NAND_TREH(0x0a) | \
 385                                         FTIM2_NAND_TWHRE(0x1e))
 386 #define CONFIG_SYS_NAND_FTIM3           0x0
 387
 388 #define CONFIG_SYS_NAND_DDR_LAW         11
 389
 390 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 391 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 392 #define CONFIG_CMD_NAND
 393
 394 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 395
 396 #if defined(CONFIG_NAND)
 397 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 398 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 399 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 400 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 401 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 402 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 403 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 404 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 405 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 406 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 407 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 408 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 409 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 410 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 411 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 412 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 413 #else
 414 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 415 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 416 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 417 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 418 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 419 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 420 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 421 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 422 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 423 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 424 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 425 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 426 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 427 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 428 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 429 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 430 #endif
 431 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 432 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 433 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 434 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 435 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 436 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 437 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 438 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 439
 440 #ifdef CONFIG_SPL_BUILD
 441 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 442 #else
 443 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 444 #endif
 445
 446 #if defined(CONFIG_RAMBOOT_PBL)
 447 #define CONFIG_SYS_RAMBOOT
 448 #endif
 449
 450 #define CONFIG_BOARD_EARLY_INIT_R
 451 #define CONFIG_MISC_INIT_R
 452
 453 #define CONFIG_HWCONFIG
 454
 455 /* define to use L1 as initial stack */
 456 #define CONFIG_L1_INIT_RAM
 457 #define CONFIG_SYS_INIT_RAM_LOCK
 458 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 459 #ifdef CONFIG_PHYS_64BIT
 460 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 461 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 462 /* The assembler doesn't like typecast */
 463 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 464         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 465           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 466 #else
 467 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 468 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 469 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 470 #endif
 471 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 472
 473 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 474                                         GENERATED_GBL_DATA_SIZE)
 475 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 476
 477 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 478 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 479
 480 /* Serial Port - controlled on board with jumper J8
 481  * open - index 2
 482  * shorted - index 1
 483  */
 484 #define CONFIG_CONS_INDEX       1
 485 #define CONFIG_SYS_NS16550_SERIAL
 486 #define CONFIG_SYS_NS16550_REG_SIZE     1
 487 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 488
 489 #define CONFIG_SYS_BAUDRATE_TABLE       \
 490         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 491
 492 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 493 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 494 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 495 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 496 #ifndef CONFIG_SPL_BUILD
 497 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 498 #endif
 499
 500 /* I2C */
 501 #define CONFIG_SYS_I2C
 502 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 503 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 504 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 505 #define CONFIG_SYS_FSL_I2C2_SPEED       400000  /* I2C speed in Hz */
 506 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 507 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 508 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x119000
 509
 510 /*
 511  * RTC configuration
 512  */
 513 #define RTC
 514 #define CONFIG_RTC_DS3231               1
 515 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 516
 517 /*
 518  * RapidIO
 519  */
 520 #ifdef CONFIG_SYS_SRIO
 521 #ifdef CONFIG_SRIO1
 522 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 523 #ifdef CONFIG_PHYS_64BIT
 524 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 525 #else
 526 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 527 #endif
 528 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 529 #endif
 530
 531 #ifdef CONFIG_SRIO2
 532 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 533 #ifdef CONFIG_PHYS_64BIT
 534 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 535 #else
 536 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 537 #endif
 538 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 539 #endif
 540 #endif
 541
 542 /*
 543  * for slave u-boot IMAGE instored in master memory space,
 544  * PHYS must be aligned based on the SIZE
 545  */
 546 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 547 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 548 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 549 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 550 /*
 551  * for slave UCODE and ENV instored in master memory space,
 552  * PHYS must be aligned based on the SIZE
 553  */
 554 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 555 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 556 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 557
 558 /* slave core release by master*/
 559 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 560 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 561
 562 /*
 563  * SRIO_PCIE_BOOT - SLAVE
 564  */
 565 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 566 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 567 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 568                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 569 #endif
 570
 571 /*
 572  * eSPI - Enhanced SPI
 573  */
 574 #define CONFIG_SF_DEFAULT_SPEED         10000000
 575 #define CONFIG_SF_DEFAULT_MODE          0
 576
 577 /*
 578  * MAPLE
 579  */
 580 #ifdef CONFIG_PHYS_64BIT
 581 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xFA0000000ull
 582 #else
 583 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xA0000000
 584 #endif
 585
 586 /*
 587  * General PCI
 588  * Memory space is mapped 1-1, but I/O space must start from 0.
 589  */
 590
 591 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 592 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 593 #ifdef CONFIG_PHYS_64BIT
 594 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 595 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 596 #else
 597 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 598 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 599 #endif
 600 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 601 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 602 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 603 #ifdef CONFIG_PHYS_64BIT
 604 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 605 #else
 606 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 607 #endif
 608 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 609
 610 /* Qman/Bman */
 611 #ifndef CONFIG_NOBQFMAN
 612 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 613 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
 614 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 615 #ifdef CONFIG_PHYS_64BIT
 616 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 617 #else
 618 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 619 #endif
 620 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 621 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 622 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 623 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 624 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 625 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 626                                         CONFIG_SYS_BMAN_CENA_SIZE)
 627 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 628 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 629 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
 630 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 631 #ifdef CONFIG_PHYS_64BIT
 632 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 633 #else
 634 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 635 #endif
 636 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 637 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 638 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 639 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 640 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 641 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 642                                         CONFIG_SYS_QMAN_CENA_SIZE)
 643 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 644 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 645
 646 #define CONFIG_SYS_DPAA_FMAN
 647
 648 #define CONFIG_SYS_DPAA_RMAN
 649
 650 /* Default address of microcode for the Linux Fman driver */
 651 #if defined(CONFIG_SPIFLASH)
 652 /*
 653  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 654  * env, so we got 0x110000.
 655  */
 656 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 657 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 658 #elif defined(CONFIG_SDCARD)
 659 /*
 660  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 661  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
 662  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
 663  */
 664 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 665 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1130)
 666 #elif defined(CONFIG_NAND)
 667 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 668 #define CONFIG_SYS_FMAN_FW_ADDR (13 * CONFIG_SYS_NAND_BLOCK_SIZE)
 669 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 670 /*
 671  * Slave has no ucode locally, it can fetch this from remote. When implementing
 672  * in two corenet boards, slave's ucode could be stored in master's memory
 673  * space, the address can be mapped from slave TLB->slave LAW->
 674  * slave SRIO or PCIE outbound window->master inbound window->
 675  * master LAW->the ucode address in master's memory space.
 676  */
 677 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 678 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 679 #else
 680 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 681 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 682 #endif
 683 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 684 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 685 #endif /* CONFIG_NOBQFMAN */
 686
 687 #ifdef CONFIG_SYS_DPAA_FMAN
 688 #define CONFIG_FMAN_ENET
 689 #define CONFIG_PHYLIB_10G
 690 #define CONFIG_PHY_VITESSE
 691 #define CONFIG_PHY_TERANETICS
 692 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 693 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
 694 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 695 #define SGMII_CARD_PORT4_PHY_ADDR 0x11
 696 #endif
 697
 698 #ifdef CONFIG_PCI
 699 #define CONFIG_PCI_INDIRECT_BRIDGE
 700 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 701
 702 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 703 #define CONFIG_DOS_PARTITION
 704 #endif  /* CONFIG_PCI */
 705
 706 #ifdef CONFIG_FMAN_ENET
 707 #define CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR 0x10
 708 #define CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR 0x11
 709
 710 /*B4860 QDS AMC2PEX-2S default PHY_ADDR */
 711 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7       /*SLOT 1*/
 712 #define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6       /*SLOT 2*/
 713
 714 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 715 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 716 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 717 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 718
 719 #define CONFIG_MII              /* MII PHY management */
 720 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 721 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 722 #endif
 723
 724 #define CONFIG_SYS_FSL_B4860QDS_XFI_ERR
 725
 726 /*
 727  * Environment
 728  */
 729 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 730 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 731
 732 /*
 733  * Command line configuration.
 734  */
 735 #define CONFIG_CMD_DATE
 736 #define CONFIG_CMD_EEPROM
 737 #define CONFIG_CMD_ERRATA
 738 #define CONFIG_CMD_IRQ
 739 #define CONFIG_CMD_REGINFO
 740
 741 #ifdef CONFIG_PCI
 742 #define CONFIG_CMD_PCI
 743 #endif
 744
 745 /* Hash command with SHA acceleration supported in hardware */
 746 #ifdef CONFIG_FSL_CAAM
 747 #define CONFIG_CMD_HASH
 748 #define CONFIG_SHA_HW_ACCEL
 749 #endif
 750
 751 /*
 752 * USB
 753 */
 754 #define CONFIG_HAS_FSL_DR_USB
 755
 756 #ifdef CONFIG_HAS_FSL_DR_USB
 757 #define CONFIG_USB_EHCI
 758
 759 #ifdef CONFIG_USB_EHCI
 760 #define CONFIG_USB_EHCI_FSL
 761 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 762 #endif
 763 #endif
 764
 765 /*
 766  * Miscellaneous configurable options
 767  */
 768 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 769 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 770 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 771 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 772 #ifdef CONFIG_CMD_KGDB
 773 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 774 #else
 775 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 776 #endif
 777 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 778 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 779 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 780
 781 /*
 782  * For booting Linux, the board info and command line data
 783  * have to be in the first 64 MB of memory, since this is
 784  * the maximum mapped by the Linux kernel during initialization.
 785  */
 786 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 787 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 788
 789 #ifdef CONFIG_CMD_KGDB
 790 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 791 #endif
 792
 793 /*
 794  * Environment Configuration
 795  */
 796 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 797 #define CONFIG_BOOTFILE         "uImage"
 798 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 799
 800 /* default location for tftp and bootm */
 801 #define CONFIG_LOADADDR         1000000
 802
 803
 804 #define CONFIG_BAUDRATE 115200
 805
 806 #define __USB_PHY_TYPE  ulpi
 807
 808 #ifdef CONFIG_PPC_B4860
 809 #define HWCONFIG        "hwconfig=fsl_ddr:ctlr_intlv=null,"     \
 810                         "bank_intlv=cs0_cs1;"   \
 811                         "en_cpc:cpc2;"
 812 #else
 813 #define HWCONFIG        "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;"
 814 #endif
 815
 816 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 817         HWCONFIG                                                \
 818         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 819         "netdev=eth0\0"                                         \
 820         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 821         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"                     \
 822         "tftpflash=tftpboot $loadaddr $uboot && "               \
 823         "protect off $ubootaddr +$filesize && "                 \
 824         "erase $ubootaddr +$filesize && "                       \
 825         "cp.b $loadaddr $ubootaddr $filesize && "               \
 826         "protect on $ubootaddr +$filesize && "                  \
 827         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 828         "consoledev=ttyS0\0"                                    \
 829         "ramdiskaddr=2000000\0"                                 \
 830         "ramdiskfile=b4860qds/ramdisk.uboot\0"                  \
 831         "fdtaddr=1e00000\0"                                     \
 832         "fdtfile=b4860qds/b4860qds.dtb\0"                               \
 833         "bdev=sda3\0"
 834
 835 /* For emulation this causes u-boot to jump to the start of the proof point
 836    app code automatically */
 837 #define CONFIG_PROOF_POINTS                     \
 838  "setenv bootargs root=/dev/$bdev rw "          \
 839  "console=$consoledev,$baudrate $othbootargs;"  \
 840  "cpu 1 release 0x29000000 - - -;"              \
 841  "cpu 2 release 0x29000000 - - -;"              \
 842  "cpu 3 release 0x29000000 - - -;"              \
 843  "cpu 4 release 0x29000000 - - -;"              \
 844  "cpu 5 release 0x29000000 - - -;"              \
 845  "cpu 6 release 0x29000000 - - -;"              \
 846  "cpu 7 release 0x29000000 - - -;"              \
 847  "go 0x29000000"
 848
 849 #define CONFIG_HVBOOT   \
 850  "setenv bootargs config-addr=0x60000000; "     \
 851  "bootm 0x01000000 - 0x00f00000"
 852
 853 #define CONFIG_ALU                              \
 854  "setenv bootargs root=/dev/$bdev rw "          \
 855  "console=$consoledev,$baudrate $othbootargs;"  \
 856  "cpu 1 release 0x01000000 - - -;"              \
 857  "cpu 2 release 0x01000000 - - -;"              \
 858  "cpu 3 release 0x01000000 - - -;"              \
 859  "cpu 4 release 0x01000000 - - -;"              \
 860  "cpu 5 release 0x01000000 - - -;"              \
 861  "cpu 6 release 0x01000000 - - -;"              \
 862  "cpu 7 release 0x01000000 - - -;"              \
 863  "go 0x01000000"
 864
 865 #define CONFIG_LINUX                            \
 866  "setenv bootargs root=/dev/ram rw "            \
 867  "console=$consoledev,$baudrate $othbootargs;"  \
 868  "setenv ramdiskaddr 0x02000000;"               \
 869  "setenv fdtaddr 0x01e00000;"                   \
 870  "setenv loadaddr 0x1000000;"                   \
 871  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 872
 873 #define CONFIG_HDBOOT                                   \
 874         "setenv bootargs root=/dev/$bdev rw "           \
 875         "console=$consoledev,$baudrate $othbootargs;"   \
 876         "tftp $loadaddr $bootfile;"                     \
 877         "tftp $fdtaddr $fdtfile;"                       \
 878         "bootm $loadaddr - $fdtaddr"
 879
 880 #define CONFIG_NFSBOOTCOMMAND                   \
 881         "setenv bootargs root=/dev/nfs rw "     \
 882         "nfsroot=$serverip:$rootpath "          \
 883         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 884         "console=$consoledev,$baudrate $othbootargs;"   \
 885         "tftp $loadaddr $bootfile;"             \
 886         "tftp $fdtaddr $fdtfile;"               \
 887         "bootm $loadaddr - $fdtaddr"
 888
 889 #define CONFIG_RAMBOOTCOMMAND                           \
 890         "setenv bootargs root=/dev/ram rw "             \
 891         "console=$consoledev,$baudrate $othbootargs;"   \
 892         "tftp $ramdiskaddr $ramdiskfile;"               \
 893         "tftp $loadaddr $bootfile;"                     \
 894         "tftp $fdtaddr $fdtfile;"                       \
 895         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 896
 897 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 898
 899 #include <asm/fsl_secure_boot.h>
 900
 901 #endif  /* __CONFIG_H */