Merge branch 'master' of /home/stefan/git/u-boot/u-boot
[platform/kernel/u-boot.git] / include / config_cmd_all.h
1 /*
2  * Copyright 2007 Freescale Semiconductor, Inc.
3  *
4  * This file is licensed under the terms of the GNU General Public
5  * License Version 2. This file is licensed "as is" without any
6  * warranty of any kind, whether express or implied.
7  */
8
9 #ifndef _CONFIG_CMD_ALL_H
10 #define _CONFIG_CMD_ALL_H
11
12 /*
13  * Alphabetical list of all possible commands.
14  */
15
16 #define CONFIG_CMD_ASKENV       /* ask for env variable         */
17 #define CONFIG_CMD_AUTOSCRIPT   /* Autoscript Support           */
18 #define CONFIG_CMD_BDI          /* bdinfo                       */
19 #define CONFIG_CMD_BEDBUG       /* Include BedBug Debugger      */
20 #define CONFIG_CMD_BMP          /* BMP support                  */
21 #define CONFIG_CMD_BOOTD        /* bootd                        */
22 #define CONFIG_CMD_BSP          /* Board Specific functions     */
23 #define CONFIG_CMD_CACHE        /* icache, dcache               */
24 #define CONFIG_CMD_CDP          /* Cisco Discovery Protocol     */
25 #define CONFIG_CMD_CONSOLE      /* coninfo                      */
26 #define CONFIG_CMD_DATE         /* support for RTC, date/time...*/
27 #define CONFIG_CMD_DHCP         /* DHCP Support                 */
28 #define CONFIG_CMD_DIAG         /* Diagnostics                  */
29 #define CONFIG_CMD_DISPLAY      /* Display support              */
30 #define CONFIG_CMD_DOC          /* Disk-On-Chip Support         */
31 #define CONFIG_CMD_DTT          /* Digital Therm and Thermostat */
32 #define CONFIG_CMD_ECHO         /* echo arguments               */
33 #define CONFIG_CMD_EEPROM       /* EEPROM read/write support    */
34 #define CONFIG_CMD_ELF          /* ELF (VxWorks) load/boot cmd  */
35 #define CONFIG_CMD_ENV          /* saveenv                      */
36 #define CONFIG_CMD_EXT2         /* EXT2 Support                 */
37 #define CONFIG_CMD_FAT          /* FAT support                  */
38 #define CONFIG_CMD_FDC          /* Floppy Disk Support          */
39 #define CONFIG_CMD_FDOS         /* Floppy DOS support           */
40 #define CONFIG_CMD_FLASH        /* flinfo, erase, protect       */
41 #define CONFIG_CMD_FPGA         /* FPGA configuration Support   */
42 #define CONFIG_CMD_HWFLOW       /* RTS/CTS hw flow control      */
43 #define CONFIG_CMD_I2C          /* I2C serial bus support       */
44 #define CONFIG_CMD_IDE          /* IDE harddisk support         */
45 #define CONFIG_CMD_IMI          /* iminfo                       */
46 #define CONFIG_CMD_IMLS         /* List all found images        */
47 #define CONFIG_CMD_IMMAP        /* IMMR dump support            */
48 #define CONFIG_CMD_IRQ          /* irqinfo                      */
49 #define CONFIG_CMD_ITEST        /* Integer (and string) test    */
50 #define CONFIG_CMD_JFFS2        /* JFFS2 Support                */
51 #define CONFIG_CMD_KGDB         /* kgdb                         */
52 #define CONFIG_CMD_LOADB        /* loadb                        */
53 #define CONFIG_CMD_LOADS        /* loads                        */
54 #define CONFIG_CMD_MEMORY       /* md mm nm mw cp cmp crc base loop mtest */
55 #define CONFIG_CMD_MFSL         /* FSL support for Microblaze   */
56 #define CONFIG_CMD_MII          /* MII support                  */
57 #define CONFIG_CMD_MISC         /* Misc functions like sleep etc*/
58 #define CONFIG_CMD_MMC          /* MMC support                  */
59 #define CONFIG_CMD_NAND         /* NAND support                 */
60 #define CONFIG_CMD_NET          /* bootp, tftpboot, rarpboot    */
61 #define CONFIG_CMD_NFS          /* NFS support                  */
62 #define CONFIG_CMD_ONENAND      /* OneNAND support              */
63 #define CONFIG_CMD_PCI          /* pciinfo                      */
64 #define CONFIG_CMD_PCMCIA       /* PCMCIA support               */
65 #define CONFIG_CMD_PING         /* ping support                 */
66 #define CONFIG_CMD_PORTIO       /* Port I/O                     */
67 #define CONFIG_CMD_REGINFO      /* Register dump                */
68 #define CONFIG_CMD_REISER       /* Reiserfs support             */
69 #define CONFIG_CMD_RUN          /* run command in env variable  */
70 #define CONFIG_CMD_SAVES        /* save S record dump           */
71 #define CONFIG_CMD_SCSI         /* SCSI Support                 */
72 #define CONFIG_CMD_SDRAM        /* SDRAM DIMM SPD info printout */
73 #define CONFIG_CMD_SETGETDCR    /* DCR support on 4xx           */
74 #define CONFIG_CMD_SNTP         /* SNTP support                 */
75 #define CONFIG_CMD_SPI          /* SPI utility                  */
76 #define CONFIG_CMD_TERMINAL     /* built-in Serial Terminal     */
77 #define CONFIG_CMD_UNIVERSE     /* Tundra Universe Support      */
78 #define CONFIG_CMD_USB          /* USB Support                  */
79 #define CONFIG_CMD_VFD          /* VFD support (TRAB)           */
80 #define CONFIG_CMD_XIMG         /* Load part of Multi Image     */
81 #define CONFIG_CMD_AT91_SPIMUX  /* AT91 MMC/SPI Mux Support     */
82
83 #endif  /* _CONFIG_CMD_ALL_H */