include/config_cmd_all.h

   1 /*
   2  * Copyright 2007 Freescale Semiconductor, Inc.
   3  *
   4  * This file is licensed under the terms of the GNU General Public
   5  * License Version 2. This file is licensed "as is" without any
   6  * warranty of any kind, whether express or implied.
   7  */
   8
   9 #ifndef _CONFIG_CMD_ALL_H
  10 #define _CONFIG_CMD_ALL_H
  11
  12 /*
  13  * Alphabetical list of all possible commands.
  14  */
  15
  16 #define CONFIG_CMD_AMBAPP       /* AMBA Plug & Play Bus print utility */
  17 #define CONFIG_CMD_ASKENV       /* ask for env variable         */
  18 #define CONFIG_CMD_BDI          /* bdinfo                       */
  19 #define CONFIG_CMD_BEDBUG       /* Include BedBug Debugger      */
  20 #define CONFIG_CMD_BMP          /* BMP support                  */
  21 #define CONFIG_CMD_BOOTD        /* bootd                        */
  22 #define CONFIG_CMD_BSP          /* Board Specific functions     */
  23 #define CONFIG_CMD_CACHE        /* icache, dcache               */
  24 #define CONFIG_CMD_CDP          /* Cisco Discovery Protocol     */
  25 #define CONFIG_CMD_CONSOLE      /* coninfo                      */
  26 #define CONFIG_CMD_DATE         /* support for RTC, date/time...*/
  27 #define CONFIG_CMD_DHCP         /* DHCP Support                 */
  28 #define CONFIG_CMD_DIAG         /* Diagnostics                  */
  29 #define CONFIG_CMD_DISPLAY      /* Display support              */
  30 #define CONFIG_CMD_DOC          /* Disk-On-Chip Support         */
  31 #define CONFIG_CMD_DTT          /* Digital Therm and Thermostat */
  32 #define CONFIG_CMD_ECHO         /* echo arguments               */
  33 #define CONFIG_CMD_EEPROM       /* EEPROM read/write support    */
  34 #define CONFIG_CMD_ELF          /* ELF (VxWorks) load/boot cmd  */
  35 #define CONFIG_CMD_SAVEENV      /* saveenv                      */
  36 #define CONFIG_CMD_EXT2         /* EXT2 Support                 */
  37 #define CONFIG_CMD_FAT          /* FAT support                  */
  38 #define CONFIG_CMD_FDC          /* Floppy Disk Support          */
  39 #define CONFIG_CMD_FDOS         /* Floppy DOS support           */
  40 #define CONFIG_CMD_FLASH        /* flinfo, erase, protect       */
  41 #define CONFIG_CMD_FPGA         /* FPGA configuration Support   */
  42 #define CONFIG_CMD_HWFLOW       /* RTS/CTS hw flow control      */
  43 #define CONFIG_CMD_I2C          /* I2C serial bus support       */
  44 #define CONFIG_CMD_IDE          /* IDE harddisk support         */
  45 #define CONFIG_CMD_IMI          /* iminfo                       */
  46 #define CONFIG_CMD_IMLS         /* List all found images        */
  47 #define CONFIG_CMD_IMMAP        /* IMMR dump support            */
  48 #define CONFIG_CMD_IRQ          /* irqinfo                      */
  49 #define CONFIG_CMD_ITEST        /* Integer (and string) test    */
  50 #define CONFIG_CMD_JFFS2        /* JFFS2 Support                */
  51 #define CONFIG_CMD_KGDB         /* kgdb                         */
  52 #define CONFIG_CMD_LICENSE      /* console license display      */
  53 #define CONFIG_CMD_LOADB        /* loadb                        */
  54 #define CONFIG_CMD_LOADS        /* loads                        */
  55 #define CONFIG_CMD_MEMORY       /* md mm nm mw cp cmp crc base loop mtest */
  56 #define CONFIG_CMD_MFSL         /* FSL support for Microblaze   */
  57 #define CONFIG_CMD_MII          /* MII support                  */
  58 #define CONFIG_CMD_MISC         /* Misc functions like sleep etc*/
  59 #define CONFIG_CMD_MMC          /* MMC support                  */
  60 #define CONFIG_CMD_MTDPARTS     /* mtd parts support            */
  61 #define CONFIG_CMD_NAND         /* NAND support                 */
  62 #define CONFIG_CMD_NET          /* bootp, tftpboot, rarpboot    */
  63 #define CONFIG_CMD_NFS          /* NFS support                  */
  64 #define CONFIG_CMD_ONENAND      /* OneNAND support              */
  65 #define CONFIG_CMD_PCI          /* pciinfo                      */
  66 #define CONFIG_CMD_PCMCIA       /* PCMCIA support               */
  67 #define CONFIG_CMD_PING         /* ping support                 */
  68 #define CONFIG_CMD_PORTIO       /* Port I/O                     */
  69 #define CONFIG_CMD_REGINFO      /* Register dump                */
  70 #define CONFIG_CMD_REISER       /* Reiserfs support             */
  71 #define CONFIG_CMD_RUN          /* run command in env variable  */
  72 #define CONFIG_CMD_SAVES        /* save S record dump           */
  73 #define CONFIG_CMD_SCSI         /* SCSI Support                 */
  74 #define CONFIG_CMD_SDRAM        /* SDRAM DIMM SPD info printout */
  75 #define CONFIG_CMD_SETEXPR      /* setexpr support              */
  76 #define CONFIG_CMD_SETGETDCR    /* DCR support on 4xx           */
  77 #define CONFIG_CMD_SNTP         /* SNTP support                 */
  78 #define CONFIG_CMD_SOURCE       /* "source" command support     */
  79 #define CONFIG_CMD_SPI          /* SPI utility                  */
  80 #define CONFIG_CMD_TERMINAL     /* built-in Serial Terminal     */
  81 #define CONFIG_CMD_UNIVERSE     /* Tundra Universe Support      */
  82 #define CONFIG_CMD_UNZIP        /* unzip from memory to memory  */
  83 #define CONFIG_CMD_USB          /* USB Support                  */
  84 #define CONFIG_CMD_VFD          /* VFD support (TRAB)           */
  85 #define CONFIG_CMD_XIMG         /* Load part of Multi Image     */
  86 #define CONFIG_CMD_AT91_SPIMUX  /* AT91 MMC/SPI Mux Support     */
  87 #define CONFIG_CMD_MG_DISK      /* mGine m(g)flash IO node support */
  88
  89 #endif  /* _CONFIG_CMD_ALL_H */