1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * (C) Copyright 2000-2009
4 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
10 #ifndef __ASSEMBLY__ /* put C only stuff in this section */
12 typedef unsigned char uchar;
13 typedef volatile unsigned long vu_long;
14 typedef volatile unsigned short vu_short;
15 typedef volatile unsigned char vu_char;
20 #include <asm-offsets.h>
21 #include <linux/bitops.h>
22 #include <linux/bug.h>
23 #include <linux/delay.h>
24 #include <linux/types.h>
25 #include <linux/printk.h>
26 #include <linux/string.h>
27 #include <linux/stringify.h>
28 #include <asm/ptrace.h>
31 #include <linux/kernel.h>
38 #define CONFIG_SYS_SUPPORT_64BIT_DATA
43 typedef void (interrupt_handler_t)(void *);
45 #include <asm/u-boot.h> /* boot information for Linux kernel */
46 #include <asm/global_data.h> /* global data used for startup functions */
48 #if defined(CONFIG_ENV_IS_EMBEDDED)
49 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
50 #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
51 (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
52 defined(CONFIG_ENV_IS_IN_NVRAM)
53 #define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
55 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
58 /* startup functions, used in:
60 * common/init/board_init.c
69 void hang (void) __attribute__ ((noreturn));
73 #include <display_options.h>
76 void main_loop (void);
77 int run_command(const char *cmd, int flag);
78 int run_command_repeatable(const char *cmd, int flag);
81 * Run a list of commands separated by ; or even \0
83 * Note that if 'len' is not -1, then the command does not need to be nul
84 * terminated, Memory will be allocated for the command in that case.
86 * @param cmd List of commands to run, each separated bu semicolon
87 * @param len Length of commands excluding terminator if known (-1 if not)
88 * @param flag Execution flags (CMD_FLAG_...)
89 * @return 0 on success, or != 0 on error.
91 int run_command_list(const char *cmd, int len, int flag);
95 extern u8 __dtb_dt_begin[]; /* embedded device tree blob */
96 extern u8 __dtb_dt_spl_begin[]; /* embedded device tree blob for SPL/TPL */
100 * Show the DRAM size in a board-specific way
102 * This is used by boards to display DRAM information in their own way.
104 * @param size Size of DRAM (which should be displayed along with other info)
106 void board_show_dram(phys_size_t size);
109 * Get the uppermost pointer that is valid to access
111 * Some systems may not map all of their address space. This function allows
112 * boards to indicate what their highest support pointer value is for DRAM
115 * @param total_size Size of U-Boot (unused?)
117 ulong board_get_usable_ram_top(ulong total_size);
120 * arch_fixup_fdt() - Write arch-specific information to fdt
122 * Defined in arch/$(ARCH)/lib/bootm-fdt.c
124 * @blob: FDT blob to write to
125 * @return 0 if ok, or -ve FDT_ERR_... on failure
127 int arch_fixup_fdt(void *blob);
130 void flash_perror (int);
132 /* common/cmd_source.c */
133 int source (ulong addr, const char *fit_uname);
135 extern ulong load_addr; /* Default Load Address */
136 extern ulong save_addr; /* Default Save Address */
137 extern ulong save_size; /* Default Save Size */
139 /* common/cmd_net.c */
140 int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
142 /* common/cmd_fat.c */
143 int do_fat_fsload(cmd_tbl_t *, int, int, char * const []);
145 /* common/cmd_ext2.c */
146 int do_ext2load(cmd_tbl_t *, int, int, char * const []);
148 void pci_init_board(void);
150 /* common/exports.c */
151 void jumptable_init(void);
153 /* common/kallsysm.c */
154 const char *symbol_lookup(unsigned long addr, unsigned long *caddr);
156 /* common/memsize.c */
157 long get_ram_size (long *, long);
158 phys_size_t get_effective_memsize(void);
160 /* $(BOARD)/$(BOARD).c */
161 void reset_phy (void);
162 void fdc_hw_init (void);
164 /* $(BOARD)/eeprom.c */
165 #ifdef CONFIG_CMD_EEPROM
166 void eeprom_init (int bus);
167 int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
168 int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
171 * Some EEPROM code is depecated because it used the legacy I2C interface. Add
172 * some macros here so we don't have to touch every one of those uses
174 #define eeprom_init(bus)
175 #define eeprom_read(dev_addr, offset, buffer, cnt) ((void)-ENOSYS)
176 #define eeprom_write(dev_addr, offset, buffer, cnt) ((void)-ENOSYS)
179 #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
180 # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
183 /* $(BOARD)/$(BOARD).c */
184 int board_early_init_f (void);
185 int board_fix_fdt (void *rw_fdt_blob); /* manipulate the U-Boot fdt before its relocation */
186 int board_late_init (void);
187 int board_postclk_init (void); /* after clocks/timebase, before env/serial */
188 int board_early_init_r (void);
190 #if defined(CONFIG_SYS_DRAM_TEST)
192 #endif /* CONFIG_SYS_DRAM_TEST */
195 int icache_status (void);
196 void icache_enable (void);
197 void icache_disable(void);
198 int dcache_status (void);
199 void dcache_enable (void);
200 void dcache_disable(void);
201 void mmu_disable(void);
202 #if defined(CONFIG_ARM)
203 void relocate_code(ulong);
205 void relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn));
207 ulong get_endaddr (void);
208 void trap_init (ulong);
211 static inline int cpumask_next(int cpu, unsigned int mask)
213 for (cpu++; !((1 << cpu) & mask); cpu++)
219 #define for_each_cpu(iter, cpu, num_cpus, mask) \
220 for (iter = 0, cpu = cpumask_next(-1, mask); \
222 iter++, cpu = cpumask_next(cpu, mask)) \
224 int cpu_numcores (void);
225 int cpu_num_dspcores(void);
227 u32 cpu_dsp_mask(void);
228 int is_core_valid (unsigned int);
233 int checkicache (void);
234 int checkdcache (void);
235 void upmconfig (unsigned int, unsigned int *, unsigned int);
236 ulong get_tbclk (void);
237 void reset_misc (void);
238 void reset_cpu (ulong addr);
239 void ft_cpu_setup(void *blob, bd_t *bd);
240 void ft_pci_setup(void *blob, bd_t *bd);
242 void smp_set_core_boot_addr(unsigned long addr, int corenr);
243 void smp_kick_all_cpus(void);
245 /* $(CPU)/serial.c */
246 int serial_init (void);
247 void serial_setbrg (void);
248 void serial_putc (const char);
249 void serial_putc_raw(const char);
250 void serial_puts (const char *);
251 int serial_getc (void);
252 int serial_tstc (void);
255 int get_clocks (void);
256 ulong get_bus_freq (ulong);
257 int get_serial_clock(void);
259 /* $(CPU)/interrupts.c */
260 int interrupt_init (void);
261 void timer_interrupt (struct pt_regs *);
262 void external_interrupt (struct pt_regs *);
263 void irq_install_handler(int, interrupt_handler_t *, void *);
264 void irq_free_handler (int);
265 void reset_timer (void);
267 /* Return value of monotonic microsecond timer */
268 unsigned long timer_get_us(void);
270 void enable_interrupts (void);
271 int disable_interrupts (void);
273 /* $(CPU)/.../commproc.c */
274 void bootcount_store (ulong);
275 ulong bootcount_load (void);
277 /* $(CPU)/.../<eth> */
278 void mii_init (void);
280 /* arch/$(ARCH)/lib/cache.c */
281 void enable_caches(void);
282 void flush_cache (unsigned long, unsigned long);
283 void flush_dcache_all(void);
284 void flush_dcache_range(unsigned long start, unsigned long stop);
285 void invalidate_dcache_range(unsigned long start, unsigned long stop);
286 void invalidate_dcache_all(void);
287 void invalidate_icache_all(void);
290 /* Disable caches (else flush caches but leave them active) */
291 CBL_DISABLE_CACHES = 1 << 0,
292 CBL_SHOW_BOOTSTAGE_REPORT = 1 << 1,
298 * Clean up ready for linux
300 * @param flags Flags to control what is done
302 int cleanup_before_linux_select(int flags);
304 /* arch/$(ARCH)/lib/ticks.S */
305 uint64_t get_ticks(void);
306 void wait_ticks (unsigned long);
308 /* arch/$(ARCH)/lib/time.c */
309 ulong usec2ticks (unsigned long usec);
310 ulong ticks2usec (unsigned long ticks);
312 /* lib/lz4_wrapper.c */
313 int ulz4fn(const void *src, size_t srcn, void *dst, size_t *dstn);
316 void qsort(void *base, size_t nmemb, size_t size,
317 int(*compar)(const void *, const void *));
318 int strcmp_compar(const void *, const void *);
324 #include <vsprintf.h>
327 char * strmhz(char *buf, unsigned long hz);
330 #include <u-boot/crc.h>
334 void srand(unsigned int seed);
335 unsigned int rand(void);
336 unsigned int rand_r(unsigned int *seedp);
339 * STDIO based functions (can always be used)
342 int serial_printf (const char *fmt, ...)
343 __attribute__ ((format (__printf__, 1, 2)));
345 /* lib/net_utils.c */
347 static inline struct in_addr env_get_ip(char *var)
349 return string_to_ip(env_get(var));
352 int pcmcia_init (void);
354 #ifdef CONFIG_LED_STATUS
355 # include <status_led.h>
358 #include <bootstage.h>
360 #ifdef CONFIG_SHOW_ACTIVITY
361 void show_activity(int arg);
364 /* Multicore arch functions */
366 int cpu_status(u32 nr);
367 int cpu_reset(u32 nr);
368 int cpu_disable(u32 nr);
369 int cpu_release(u32 nr, int argc, char * const argv[]);
372 #else /* __ASSEMBLY__ */
374 #endif /* __ASSEMBLY__ */
376 /* Put only stuff here that the assembler can digest */
379 #define CONFIG_HAS_POST
380 #ifndef CONFIG_POST_ALT_LIST
381 #define CONFIG_POST_STD_LIST
385 #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1))
388 * check_member() - Check the offset of a structure member
390 * @structure: Name of structure (e.g. global_data)
391 * @member: Name of member (e.g. baudrate)
392 * @offset: Expected offset in bytes
394 #define check_member(structure, member, offset) _Static_assert( \
395 offsetof(struct structure, member) == offset, \
396 "`struct " #structure "` offset for `" #member "` is not " #offset)
398 /* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */
399 #ifdef CONFIG_EFI_STUB
400 #define ll_boot_init() false
402 #define ll_boot_init() true
405 /* Pull in stuff for the build system */
407 # include <environment.h>
410 #endif /* __COMMON_H_ */