2 * (C) Copyright 2000-2002
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 * See file CREDITS for list of people who contributed to this
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25 * Definitions for Configuring the monitor commands
31 * Configurable monitor commands
33 #define CFG_CMD_BDI 0x00000001 /* bdinfo */
34 #define CFG_CMD_LOADS 0x00000002 /* loads */
35 #define CFG_CMD_LOADB 0x00000004 /* loadb */
36 #define CFG_CMD_IMI 0x00000008 /* iminfo */
37 #define CFG_CMD_CACHE 0x00000010 /* icache, dcache */
38 #define CFG_CMD_FLASH 0x00000020 /* flinfo, erase, protect */
39 #define CFG_CMD_MEMORY 0x00000040 /* md, mm, nm, mw, cp, cmp, */
40 /* crc, base, loop, mtest */
41 #define CFG_CMD_NET 0x00000080 /* bootp, tftpboot, rarpboot */
42 #define CFG_CMD_ENV 0x00000100 /* saveenv */
43 #define CFG_CMD_KGDB 0x00000200 /* kgdb */
44 #define CFG_CMD_PCMCIA 0x00000400 /* PCMCIA support */
45 #define CFG_CMD_IDE 0x00000800 /* IDE harddisk support */
46 #define CFG_CMD_PCI 0x00001000 /* pciinfo */
47 #define CFG_CMD_IRQ 0x00002000 /* irqinfo */
48 #define CFG_CMD_BOOTD 0x00004000 /* bootd */
49 #define CFG_CMD_CONSOLE 0x00008000 /* coninfo */
50 #define CFG_CMD_EEPROM 0x00010000 /* EEPROM read/write support */
51 #define CFG_CMD_ASKENV 0x00020000 /* ask for env variable */
52 #define CFG_CMD_RUN 0x00040000 /* run command in env variable */
53 #define CFG_CMD_ECHO 0x00080000 /* echo arguments */
54 #define CFG_CMD_I2C 0x00100000 /* I2C serial bus support */
55 #define CFG_CMD_REGINFO 0x00200000 /* Register dump */
56 #define CFG_CMD_IMMAP 0x00400000 /* IMMR dump support */
57 #define CFG_CMD_DATE 0x00800000 /* support for RTC, date/time...*/
58 #define CFG_CMD_DHCP 0x01000000 /* DHCP Support */
59 #define CFG_CMD_BEDBUG 0x02000000 /* Include BedBug Debugger */
60 #define CFG_CMD_FDC 0x04000000 /* Floppy Disk Support */
61 #define CFG_CMD_SCSI 0x08000000 /* SCSI Support */
62 #define CFG_CMD_AUTOSCRIPT 0x10000000 /* Autoscript Support */
63 #define CFG_CMD_MII 0x20000000 /* MII support */
64 #define CFG_CMD_SETGETDCR 0x40000000 /* DCR support on 4xx */
65 #define CFG_CMD_BSP 0x80000000 /* Board Specific functions */
67 #define CFG_CMD_ELF 0x0000000100000000 /* ELF (VxWorks) load/boot cmd */
68 #define CFG_CMD_MISC 0x0000000200000000 /* Misc functions like sleep etc*/
69 #define CFG_CMD_USB 0x0000000400000000 /* USB Support */
70 #define CFG_CMD_DOC 0x0000000800000000 /* Disk-On-Chip Support */
71 #define CFG_CMD_JFFS2 0x0000001000000000 /* JFFS2 Support */
72 #define CFG_CMD_DTT 0x0000002000000000 /* Digital Therm and Thermostat */
73 #define CFG_CMD_SDRAM 0x0000004000000000 /* SDRAM DIMM SPD info printout */
74 #define CFG_CMD_DIAG 0x0000008000000000 /* Diagnostics */
75 #define CFG_CMD_FPGA 0x0000010000000000 /* FPGA configuration Support */
76 #define CFG_CMD_HWFLOW 0x0000020000000000 /* RTS/CTS hw flow control */
77 #define CFG_CMD_SAVES 0x0000040000000000 /* save S record dump */
78 #define CFG_CMD_SPI 0x0000100000000000 /* SPI utility */
79 #define CFG_CMD_FDOS 0x0000200000000000 /* Floppy DOS support */
80 #define CFG_CMD_VFD 0x0000400000000000 /* VFD support (TRAB) */
81 #define CFG_CMD_NAND 0x0000800000000000 /* NAND support */
82 #define CFG_CMD_BMP 0x0001000000000000 /* BMP support */
83 #define CFG_CMD_PORTIO 0x0002000000000000 /* Port I/O */
84 #define CFG_CMD_PING 0x0004000000000000 /* ping support */
85 #define CFG_CMD_MMC 0x0008000000000000 /* MMC support */
86 #define CFG_CMD_FAT 0x0010000000000000 /* FAT support */
88 #define CFG_CMD_ALL 0xFFFFFFFFFFFFFFFF /* ALL commands */
90 /* Commands that are considered "non-standard" for some reason
91 * (memory hogs, requires special hardware, not fully tested, etc.)
93 #define CFG_CMD_NONSTD (CFG_CMD_ASKENV | \
130 /* Default configuration
132 #define CONFIG_CMD_DFL (CFG_CMD_ALL & ~CFG_CMD_NONSTD)
134 #ifndef CONFIG_COMMANDS
135 #define CONFIG_COMMANDS CONFIG_CMD_DFL
141 * optional BOOTP fields
144 #define CONFIG_BOOTP_SUBNETMASK 0x00000001
145 #define CONFIG_BOOTP_GATEWAY 0x00000002
146 #define CONFIG_BOOTP_HOSTNAME 0x00000004
147 #define CONFIG_BOOTP_NISDOMAIN 0x00000008
148 #define CONFIG_BOOTP_BOOTPATH 0x00000010
149 #define CONFIG_BOOTP_BOOTFILESIZE 0x00000020
150 #define CONFIG_BOOTP_DNS 0x00000040
152 #define CONFIG_BOOTP_VENDOREX 0x80000000
154 #define CONFIG_BOOTP_ALL (~CONFIG_BOOTP_VENDOREX)
157 #define CONFIG_BOOTP_DEFAULT (CONFIG_BOOTP_SUBNETMASK | \
158 CONFIG_BOOTP_GATEWAY | \
159 CONFIG_BOOTP_HOSTNAME | \
160 CONFIG_BOOTP_BOOTPATH)
162 #ifndef CONFIG_BOOTP_MASK
163 #define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
166 #endif /* _CMD_CONFIG_H */