3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 * See file CREDITS for list of people who contributed to this
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25 * Most of the following information was derived from the document
26 * "Information Technology - AT Attachment-3 Interface (ATA-3)"
27 * which can be found at:
28 * http://www.dt.wdc.com/ata/ata-3/ata3r5v.zip
29 * ftp://poctok.iae.nsk.su/pub/asm/Documents/IDE/ATA3R5V.ZIP
30 * ftp://ftp.fee.vutbr.cz/pub/doc/io/ata/ata-3/ata3r5v.zip
36 /* Register addressing depends on the hardware design; for instance,
37 * 8-bit (register) and 16-bit (data) accesses might use different
38 * address spaces. This is implemented by the following definitions.
40 #ifndef CFG_ATA_STRIDE
41 #define CFG_ATA_STRIDE 1
44 #define ATA_IO_DATA(x) (CFG_ATA_DATA_OFFSET+((x) * CFG_ATA_STRIDE))
45 #define ATA_IO_REG(x) (CFG_ATA_REG_OFFSET +((x) * CFG_ATA_STRIDE))
46 #define ATA_IO_ALT(x) (CFG_ATA_ALT_OFFSET +((x) * CFG_ATA_STRIDE))
49 * I/O Register Descriptions
51 #define ATA_DATA_REG ATA_IO_DATA(0)
52 #define ATA_ERROR_REG ATA_IO_REG(1)
53 #define ATA_SECT_CNT ATA_IO_REG(2)
54 #define ATA_SECT_NUM ATA_IO_REG(3)
55 #define ATA_CYL_LOW ATA_IO_REG(4)
56 #define ATA_CYL_HIGH ATA_IO_REG(5)
57 #define ATA_DEV_HD ATA_IO_REG(6)
58 #define ATA_COMMAND ATA_IO_REG(7)
59 #define ATA_DATA_EVEN ATA_IO_REG(8)
60 #define ATA_DATA_ODD ATA_IO_REG(9)
61 #define ATA_STATUS ATA_COMMAND
62 #define ATA_DEV_CTL ATA_IO_ALT(6)
63 #define ATA_LBA_LOW ATA_SECT_NUM
64 #define ATA_LBA_MID ATA_CYL_LOW
65 #define ATA_LBA_HIGH ATA_CYL_HIGH
66 #define ATA_LBA_SEL ATA_DEV_CTL
69 * Status register bits
71 #define ATA_STAT_BUSY 0x80 /* Device Busy */
72 #define ATA_STAT_READY 0x40 /* Device Ready */
73 #define ATA_STAT_FAULT 0x20 /* Device Fault */
74 #define ATA_STAT_SEEK 0x10 /* Device Seek Complete */
75 #define ATA_STAT_DRQ 0x08 /* Data Request (ready) */
76 #define ATA_STAT_CORR 0x04 /* Corrected Data Error */
77 #define ATA_STAT_INDEX 0x02 /* Vendor specific */
78 #define ATA_STAT_ERR 0x01 /* Error */
81 * Device / Head Register Bits
83 #define ATA_DEVICE(x) ((x & 1)<<4)
87 * ATA Commands (only mandatory commands listed here)
89 #define ATA_CMD_READ 0x20 /* Read Sectors (with retries) */
90 #define ATA_CMD_READN 0x21 /* Read Sectors ( no retries) */
91 #define ATA_CMD_WRITE 0x30 /* Write Sectores (with retries)*/
92 #define ATA_CMD_WRITEN 0x31 /* Write Sectors ( no retries)*/
93 #define ATA_CMD_VRFY 0x40 /* Read Verify (with retries) */
94 #define ATA_CMD_VRFYN 0x41 /* Read verify ( no retries) */
95 #define ATA_CMD_SEEK 0x70 /* Seek */
96 #define ATA_CMD_DIAG 0x90 /* Execute Device Diagnostic */
97 #define ATA_CMD_INIT 0x91 /* Initialize Device Parameters */
98 #define ATA_CMD_RD_MULT 0xC4 /* Read Multiple */
99 #define ATA_CMD_WR_MULT 0xC5 /* Write Multiple */
100 #define ATA_CMD_SETMULT 0xC6 /* Set Multiple Mode */
101 #define ATA_CMD_RD_DMA 0xC8 /* Read DMA (with retries) */
102 #define ATA_CMD_RD_DMAN 0xC9 /* Read DMS ( no retries) */
103 #define ATA_CMD_WR_DMA 0xCA /* Write DMA (with retries) */
104 #define ATA_CMD_WR_DMAN 0xCB /* Write DMA ( no retires) */
105 #define ATA_CMD_IDENT 0xEC /* Identify Device */
106 #define ATA_CMD_SETF 0xEF /* Set Features */
107 #define ATA_CMD_CHK_PWR 0xE5 /* Check Power Mode */
112 #define ATAPI_CMD_IDENT 0xA1 /* Identify AT Atachment Packed Interface Device */
113 #define ATAPI_CMD_PACKET 0xA0 /* Packed Command */
116 #define ATAPI_CMD_INQUIRY 0x12
117 #define ATAPI_CMD_REQ_SENSE 0x03
118 #define ATAPI_CMD_READ_CAP 0x25
119 #define ATAPI_CMD_START_STOP 0x1B
120 #define ATAPI_CMD_READ_12 0xA8
123 #define ATA_GET_ERR() inb(ATA_STATUS)
124 #define ATA_GET_STAT() inb(ATA_STATUS)
125 #define ATA_OK_STAT(stat,good,bad) (((stat)&((good)|(bad)))==(good))
126 #define ATA_BAD_R_STAT (ATA_STAT_BUSY | ATA_STAT_ERR)
127 #define ATA_BAD_W_STAT (ATA_BAD_R_STAT | ATA_STAT_FAULT)
128 #define ATA_BAD_STAT (ATA_BAD_R_STAT | ATA_STAT_DRQ)
129 #define ATA_DRIVE_READY (ATA_READY_STAT | ATA_STAT_SEEK)
130 #define ATA_DATA_READY (ATA_STAT_DRQ)
132 #define ATA_BLOCKSIZE 512 /* bytes */
133 #define ATA_BLOCKSHIFT 9 /* 2 ^ ATA_BLOCKSIZESHIFT = 512 */
134 #define ATA_SECTORWORDS (512 / sizeof(unsigned long))
136 #ifndef ATA_RESET_TIME
137 #define ATA_RESET_TIME 60 /* spec allows up to 31 seconds */
140 /* ------------------------------------------------------------------------- */
143 * structure returned by ATA_CMD_IDENT, as per ANSI ATA2 rev.2f spec
145 typedef struct hd_driveid {
146 unsigned short config; /* lots of obsolete bit flags */
147 unsigned short cyls; /* "physical" cyls */
148 unsigned short reserved2; /* reserved (word 2) */
149 unsigned short heads; /* "physical" heads */
150 unsigned short track_bytes; /* unformatted bytes per track */
151 unsigned short sector_bytes; /* unformatted bytes per sector */
152 unsigned short sectors; /* "physical" sectors per track */
153 unsigned short vendor0; /* vendor unique */
154 unsigned short vendor1; /* vendor unique */
155 unsigned short vendor2; /* vendor unique */
156 unsigned char serial_no[20]; /* 0 = not_specified */
157 unsigned short buf_type;
158 unsigned short buf_size; /* 512 byte increments; 0 = not_specified */
159 unsigned short ecc_bytes; /* for r/w long cmds; 0 = not_specified */
160 unsigned char fw_rev[8]; /* 0 = not_specified */
161 unsigned char model[40]; /* 0 = not_specified */
162 unsigned char max_multsect; /* 0=not_implemented */
163 unsigned char vendor3; /* vendor unique */
164 unsigned short dword_io; /* 0=not_implemented; 1=implemented */
165 unsigned char vendor4; /* vendor unique */
166 unsigned char capability; /* bits 0:DMA 1:LBA 2:IORDYsw 3:IORDYsup*/
167 unsigned short reserved50; /* reserved (word 50) */
168 unsigned char vendor5; /* vendor unique */
169 unsigned char tPIO; /* 0=slow, 1=medium, 2=fast */
170 unsigned char vendor6; /* vendor unique */
171 unsigned char tDMA; /* 0=slow, 1=medium, 2=fast */
172 unsigned short field_valid; /* bits 0:cur_ok 1:eide_ok */
173 unsigned short cur_cyls; /* logical cylinders */
174 unsigned short cur_heads; /* logical heads */
175 unsigned short cur_sectors; /* logical sectors per track */
176 unsigned short cur_capacity0; /* logical total sectors on drive */
177 unsigned short cur_capacity1; /* (2 words, misaligned int) */
178 unsigned char multsect; /* current multiple sector count */
179 unsigned char multsect_valid; /* when (bit0==1) multsect is ok */
180 unsigned int lba_capacity; /* total number of sectors */
181 unsigned short dma_1word; /* single-word dma info */
182 unsigned short dma_mword; /* multiple-word dma info */
183 unsigned short eide_pio_modes; /* bits 0:mode3 1:mode4 */
184 unsigned short eide_dma_min; /* min mword dma cycle time (ns) */
185 unsigned short eide_dma_time; /* recommended mword dma cycle time (ns) */
186 unsigned short eide_pio; /* min cycle time (ns), no IORDY */
187 unsigned short eide_pio_iordy; /* min cycle time (ns), with IORDY */
188 unsigned short words69_70[2]; /* reserved words 69-70 */
189 unsigned short words71_74[4]; /* reserved words 71-74 */
190 unsigned short queue_depth; /* */
191 unsigned short words76_79[4]; /* reserved words 76-79 */
192 unsigned short major_rev_num; /* */
193 unsigned short minor_rev_num; /* */
194 unsigned short command_set_1; /* bits 0:Smart 1:Security 2:Removable 3:PM */
195 unsigned short command_set_2; /* bits 14:Smart Enabled 13:0 zero */
196 unsigned short cfsse; /* command set-feature supported extensions */
197 unsigned short cfs_enable_1; /* command set-feature enabled */
198 unsigned short cfs_enable_2; /* command set-feature enabled */
199 unsigned short csf_default; /* command set-feature default */
200 unsigned short dma_ultra; /* */
201 unsigned short word89; /* reserved (word 89) */
202 unsigned short word90; /* reserved (word 90) */
203 unsigned short CurAPMvalues; /* current APM values */
204 unsigned short word92; /* reserved (word 92) */
205 unsigned short hw_config; /* hardware config */
206 unsigned short words94_125[32];/* reserved words 94-125 */
207 unsigned short last_lun; /* reserved (word 126) */
208 unsigned short word127; /* reserved (word 127) */
209 unsigned short dlf; /* device lock function
211 * 8 security level 1:max 0:high
220 unsigned short csfo; /* current set features options
227 unsigned short words130_155[26];/* reserved vendor words 130-155 */
228 unsigned short word156;
229 unsigned short words157_159[3];/* reserved vendor words 157-159 */
230 unsigned short words160_255[95];/* reserved words 160-255 */
235 * PIO Mode Configuration
237 * See ATA-3 (AT Attachment-3 Interface) documentation, Figure 14 / Table 21
241 unsigned int t_setup; /* Setup Time in [ns] or clocks */
242 unsigned int t_length; /* Length Time in [ns] or clocks */
243 unsigned int t_hold; /* Hold Time in [ns] or clocks */
247 #define IDE_MAX_PIO_MODE 4 /* max suppurted PIO mode */
249 /* ------------------------------------------------------------------------- */