3 * MPC8260 Communication Processor Module.
4 * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
6 * This file contains structures and information for the communication
7 * processor channels found in the dual port RAM or parameter RAM.
8 * All CPM control and status is available through the MPC8260 internal
9 * memory map. See immap.h for details.
14 #include <asm/immap_8260.h>
16 /* CPM Command register.
18 #define CPM_CR_RST ((uint)0x80000000)
19 #define CPM_CR_PAGE ((uint)0x7c000000)
20 #define CPM_CR_SBLOCK ((uint)0x03e00000)
21 #define CPM_CR_FLG ((uint)0x00010000)
22 #define CPM_CR_MCN ((uint)0x00003fc0)
23 #define CPM_CR_OPCODE ((uint)0x0000000f)
25 /* Device sub-block and page codes.
27 #define CPM_CR_SCC1_SBLOCK (0x04)
28 #define CPM_CR_SCC2_SBLOCK (0x05)
29 #define CPM_CR_SCC3_SBLOCK (0x06)
30 #define CPM_CR_SCC4_SBLOCK (0x07)
31 #define CPM_CR_SMC1_SBLOCK (0x08)
32 #define CPM_CR_SMC2_SBLOCK (0x09)
33 #define CPM_CR_SPI_SBLOCK (0x0a)
34 #define CPM_CR_I2C_SBLOCK (0x0b)
35 #define CPM_CR_TIMER_SBLOCK (0x0f)
36 #define CPM_CR_RAND_SBLOCK (0x0e)
37 #define CPM_CR_FCC1_SBLOCK (0x10)
38 #define CPM_CR_FCC2_SBLOCK (0x11)
39 #define CPM_CR_FCC3_SBLOCK (0x12)
40 #define CPM_CR_IDMA1_SBLOCK (0x14)
41 #define CPM_CR_IDMA2_SBLOCK (0x15)
42 #define CPM_CR_IDMA3_SBLOCK (0x16)
43 #define CPM_CR_IDMA4_SBLOCK (0x17)
44 #define CPM_CR_MCC1_SBLOCK (0x1c)
46 #define CPM_CR_SCC1_PAGE (0x00)
47 #define CPM_CR_SCC2_PAGE (0x01)
48 #define CPM_CR_SCC3_PAGE (0x02)
49 #define CPM_CR_SCC4_PAGE (0x03)
50 #define CPM_CR_SMC1_PAGE (0x07)
51 #define CPM_CR_SMC2_PAGE (0x08)
52 #define CPM_CR_SPI_PAGE (0x09)
53 #define CPM_CR_I2C_PAGE (0x0a)
54 #define CPM_CR_TIMER_PAGE (0x0a)
55 #define CPM_CR_RAND_PAGE (0x0a)
56 #define CPM_CR_FCC1_PAGE (0x04)
57 #define CPM_CR_FCC2_PAGE (0x05)
58 #define CPM_CR_FCC3_PAGE (0x06)
59 #define CPM_CR_IDMA1_PAGE (0x07)
60 #define CPM_CR_IDMA2_PAGE (0x08)
61 #define CPM_CR_IDMA3_PAGE (0x09)
62 #define CPM_CR_IDMA4_PAGE (0x0a)
63 #define CPM_CR_MCC1_PAGE (0x07)
64 #define CPM_CR_MCC2_PAGE (0x08)
66 /* Some opcodes (there are more...later)
68 #define CPM_CR_INIT_TRX ((ushort)0x0000)
69 #define CPM_CR_INIT_RX ((ushort)0x0001)
70 #define CPM_CR_INIT_TX ((ushort)0x0002)
71 #define CPM_CR_HUNT_MODE ((ushort)0x0003)
72 #define CPM_CR_STOP_TX ((ushort)0x0004)
73 #define CPM_CR_RESTART_TX ((ushort)0x0006)
74 #define CPM_CR_SET_GADDR ((ushort)0x0008)
76 #define mk_cr_cmd(PG, SBC, MCN, OP) \
77 ((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
79 /* Dual Port RAM addresses. The first 16K is available for almost
80 * any CPM use, so we put the BDs there. The first 128 bytes are
81 * used for SMC1 and SMC2 parameter RAM, so we start allocating
82 * BDs above that. All of this must change when we start
83 * downloading RAM microcode.
85 #define CPM_DATAONLY_BASE ((uint)128)
86 #define CPM_DATAONLY_SIZE ((uint)(16 * 1024) - CPM_DATAONLY_BASE)
87 #define CPM_DP_NOSPACE ((uint)0x7fffffff)
88 #define CPM_FCC_SPECIAL_BASE ((uint)0x0000b000)
90 /* The number of pages of host memory we allocate for CPM. This is
91 * done early in kernel initialization to get physically contiguous
94 #define NUM_CPM_HOST_PAGES 2
97 /* Export the base address of the communication processor registers
100 extern cpm8260_t *cpmp; /* Pointer to comm processor */
101 uint m8260_cpm_dpalloc(uint size, uint align);
102 uint m8260_cpm_hostalloc(uint size, uint align);
103 void m8260_cpm_setbrg(uint brg, uint rate);
104 void m8260_cpm_fastbrg(uint brg, uint rate, int div16);
105 void m8260_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel);
107 /* Buffer descriptors used by many of the CPM protocols.
109 typedef struct cpm_buf_desc {
110 ushort cbd_sc; /* Status and Control */
111 ushort cbd_datlen; /* Data length in buffer */
112 uint cbd_bufaddr; /* Buffer address in host memory */
115 #define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */
116 #define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
117 #define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
118 #define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
119 #define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */
120 #define BD_SC_CM ((ushort)0x0200) /* Continous mode */
121 #define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
122 #define BD_SC_P ((ushort)0x0100) /* xmt preamble */
123 #define BD_SC_BR ((ushort)0x0020) /* Break received */
124 #define BD_SC_FR ((ushort)0x0010) /* Framing error */
125 #define BD_SC_PR ((ushort)0x0008) /* Parity error */
126 #define BD_SC_OV ((ushort)0x0002) /* Overrun */
127 #define BD_SC_CD ((ushort)0x0001) /* ?? */
129 /* Function code bits, usually generic to devices.
131 #define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */
132 #define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */
133 #define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */
134 #define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */
135 #define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */
137 /* Parameter RAM offsets from the base.
139 #ifndef CFG_CPM_POST_WORD_ADDR
140 #define CPM_POST_WORD_ADDR 0x80FC /* steal a long at the end of SCC1 */
142 #define CPM_POST_WORD_ADDR CFG_CPM_POST_WORD_ADDR
145 #ifndef CFG_CPM_BOOTCOUNT_ADDR
146 #define CPM_BOOTCOUNT_ADDR (CPM_POST_WORD_ADDR - 2*sizeof(ulong))
148 #define CPM_BOOTCOUNT_ADDR CFG_CPM_BOOTCOUNT_ADDR
151 #define PROFF_SCC1 ((uint)0x8000)
152 #define PROFF_SCC2 ((uint)0x8100)
153 #define PROFF_SCC3 ((uint)0x8200)
154 #define PROFF_SCC4 ((uint)0x8300)
155 #define PROFF_FCC1 ((uint)0x8400)
156 #define PROFF_FCC2 ((uint)0x8500)
157 #define PROFF_FCC3 ((uint)0x8600)
158 #define PROFF_MCC1 ((uint)0x8700)
159 #define PROFF_SMC1_BASE ((uint)0x87fc)
160 #define PROFF_IDMA1_BASE ((uint)0x87fe)
161 #define PROFF_MCC2 ((uint)0x8800)
162 #define PROFF_SMC2_BASE ((uint)0x88fc)
163 #define PROFF_IDMA2_BASE ((uint)0x88fe)
164 #define PROFF_SPI_BASE ((uint)0x89fc)
165 #define PROFF_IDMA3_BASE ((uint)0x89fe)
166 #define PROFF_TIMERS ((uint)0x8ae0)
167 #define PROFF_REVNUM ((uint)0x8af0)
168 #define PROFF_RAND ((uint)0x8af8)
169 #define PROFF_I2C_BASE ((uint)0x8afc)
170 #define PROFF_IDMA4_BASE ((uint)0x8afe)
172 /* The SMCs are relocated to any of the first eight DPRAM pages.
173 * We will fix these at the first locations of DPRAM, until we
174 * get some microcode patches :-).
175 * The parameter ram space for the SMCs is fifty-some bytes, and
176 * they are required to start on a 64 byte boundary.
178 #define PROFF_SMC1 (0)
179 #define PROFF_SMC2 (64)
180 #define PROFF_SPI ((16*1024) - 128)
182 /* Define enough so I can at least use the serial port as a UART.
184 typedef struct smc_uart {
185 ushort smc_rbase; /* Rx Buffer descriptor base address */
186 ushort smc_tbase; /* Tx Buffer descriptor base address */
187 u_char smc_rfcr; /* Rx function code */
188 u_char smc_tfcr; /* Tx function code */
189 ushort smc_mrblr; /* Max receive buffer length */
190 uint smc_rstate; /* Internal */
191 uint smc_idp; /* Internal */
192 ushort smc_rbptr; /* Internal */
193 ushort smc_ibc; /* Internal */
194 uint smc_rxtmp; /* Internal */
195 uint smc_tstate; /* Internal */
196 uint smc_tdp; /* Internal */
197 ushort smc_tbptr; /* Internal */
198 ushort smc_tbc; /* Internal */
199 uint smc_txtmp; /* Internal */
200 ushort smc_maxidl; /* Maximum idle characters */
201 ushort smc_tmpidl; /* Temporary idle counter */
202 ushort smc_brklen; /* Last received break length */
203 ushort smc_brkec; /* rcv'd break condition counter */
204 ushort smc_brkcr; /* xmt break count register */
205 ushort smc_rmask; /* Temporary bit mask */
206 uint smc_stmp; /* SDMA Temp */
209 /* SMC uart mode register (Internal memory map).
211 #define SMCMR_REN ((ushort)0x0001)
212 #define SMCMR_TEN ((ushort)0x0002)
213 #define SMCMR_DM ((ushort)0x000c)
214 #define SMCMR_SM_GCI ((ushort)0x0000)
215 #define SMCMR_SM_UART ((ushort)0x0020)
216 #define SMCMR_SM_TRANS ((ushort)0x0030)
217 #define SMCMR_SM_MASK ((ushort)0x0030)
218 #define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
219 #define SMCMR_REVD SMCMR_PM_EVEN
220 #define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
221 #define SMCMR_BS SMCMR_PEN
222 #define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
223 #define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
224 #define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
226 /* SMC Event and Mask register.
228 #define SMCM_TXE ((unsigned char)0x10)
229 #define SMCM_BSY ((unsigned char)0x04)
230 #define SMCM_TX ((unsigned char)0x02)
231 #define SMCM_RX ((unsigned char)0x01)
233 /* Baud rate generators.
235 #define CPM_BRG_RST ((uint)0x00020000)
236 #define CPM_BRG_EN ((uint)0x00010000)
237 #define CPM_BRG_EXTC_INT ((uint)0x00000000)
238 #define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000)
239 #define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000)
240 #define CPM_BRG_ATB ((uint)0x00002000)
241 #define CPM_BRG_CD_MASK ((uint)0x00001ffe)
242 #define CPM_BRG_DIV16 ((uint)0x00000001)
246 #define SCC_GSMRH_IRP ((uint)0x00040000)
247 #define SCC_GSMRH_GDE ((uint)0x00010000)
248 #define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
249 #define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
250 #define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
251 #define SCC_GSMRH_REVD ((uint)0x00002000)
252 #define SCC_GSMRH_TRX ((uint)0x00001000)
253 #define SCC_GSMRH_TTX ((uint)0x00000800)
254 #define SCC_GSMRH_CDP ((uint)0x00000400)
255 #define SCC_GSMRH_CTSP ((uint)0x00000200)
256 #define SCC_GSMRH_CDS ((uint)0x00000100)
257 #define SCC_GSMRH_CTSS ((uint)0x00000080)
258 #define SCC_GSMRH_TFL ((uint)0x00000040)
259 #define SCC_GSMRH_RFW ((uint)0x00000020)
260 #define SCC_GSMRH_TXSY ((uint)0x00000010)
261 #define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
262 #define SCC_GSMRH_SYNL8 ((uint)0x00000008)
263 #define SCC_GSMRH_SYNL4 ((uint)0x00000004)
264 #define SCC_GSMRH_RTSM ((uint)0x00000002)
265 #define SCC_GSMRH_RSYN ((uint)0x00000001)
267 #define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
268 #define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
269 #define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
270 #define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
271 #define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
272 #define SCC_GSMRL_TCI ((uint)0x10000000)
273 #define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
274 #define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
275 #define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
276 #define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
277 #define SCC_GSMRL_RINV ((uint)0x02000000)
278 #define SCC_GSMRL_TINV ((uint)0x01000000)
279 #define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
280 #define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
281 #define SCC_GSMRL_TPL_48 ((uint)0x00800000)
282 #define SCC_GSMRL_TPL_32 ((uint)0x00600000)
283 #define SCC_GSMRL_TPL_16 ((uint)0x00400000)
284 #define SCC_GSMRL_TPL_8 ((uint)0x00200000)
285 #define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
286 #define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
287 #define SCC_GSMRL_TPP_01 ((uint)0x00100000)
288 #define SCC_GSMRL_TPP_10 ((uint)0x00080000)
289 #define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
290 #define SCC_GSMRL_TEND ((uint)0x00040000)
291 #define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
292 #define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
293 #define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
294 #define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
295 #define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
296 #define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
297 #define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
298 #define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
299 #define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
300 #define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
301 #define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
302 #define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
303 #define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
304 #define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
305 #define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
306 #define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
307 #define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
308 #define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
309 #define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
310 #define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
311 #define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
312 #define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
313 #define SCC_GSMRL_ENR ((uint)0x00000020)
314 #define SCC_GSMRL_ENT ((uint)0x00000010)
315 #define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
316 #define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
317 #define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
318 #define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
319 #define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
320 #define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
321 #define SCC_GSMRL_MODE_UART ((uint)0x00000004)
322 #define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
323 #define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
324 #define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
326 #define SCC_TODR_TOD ((ushort)0x8000)
328 /* SCC Event and Mask register.
330 #define SCCM_TXE ((unsigned char)0x10)
331 #define SCCM_BSY ((unsigned char)0x04)
332 #define SCCM_TX ((unsigned char)0x02)
333 #define SCCM_RX ((unsigned char)0x01)
335 typedef struct scc_param {
336 ushort scc_rbase; /* Rx Buffer descriptor base address */
337 ushort scc_tbase; /* Tx Buffer descriptor base address */
338 u_char scc_rfcr; /* Rx function code */
339 u_char scc_tfcr; /* Tx function code */
340 ushort scc_mrblr; /* Max receive buffer length */
341 uint scc_rstate; /* Internal */
342 uint scc_idp; /* Internal */
343 ushort scc_rbptr; /* Internal */
344 ushort scc_ibc; /* Internal */
345 uint scc_rxtmp; /* Internal */
346 uint scc_tstate; /* Internal */
347 uint scc_tdp; /* Internal */
348 ushort scc_tbptr; /* Internal */
349 ushort scc_tbc; /* Internal */
350 uint scc_txtmp; /* Internal */
351 uint scc_rcrc; /* Internal */
352 uint scc_tcrc; /* Internal */
355 /* CPM Ethernet through SCC1.
357 typedef struct scc_enet {
359 uint sen_cpres; /* Preset CRC */
360 uint sen_cmask; /* Constant mask for CRC */
361 uint sen_crcec; /* CRC Error counter */
362 uint sen_alec; /* alignment error counter */
363 uint sen_disfc; /* discard frame counter */
364 ushort sen_pads; /* Tx short frame pad character */
365 ushort sen_retlim; /* Retry limit threshold */
366 ushort sen_retcnt; /* Retry limit counter */
367 ushort sen_maxflr; /* maximum frame length register */
368 ushort sen_minflr; /* minimum frame length register */
369 ushort sen_maxd1; /* maximum DMA1 length */
370 ushort sen_maxd2; /* maximum DMA2 length */
371 ushort sen_maxd; /* Rx max DMA */
372 ushort sen_dmacnt; /* Rx DMA counter */
373 ushort sen_maxb; /* Max BD byte count */
374 ushort sen_gaddr1; /* Group address filter */
378 uint sen_tbuf0data0; /* Save area 0 - current frame */
379 uint sen_tbuf0data1; /* Save area 1 - current frame */
380 uint sen_tbuf0rba; /* Internal */
381 uint sen_tbuf0crc; /* Internal */
382 ushort sen_tbuf0bcnt; /* Internal */
383 ushort sen_paddrh; /* physical address (MSB) */
385 ushort sen_paddrl; /* physical address (LSB) */
386 ushort sen_pper; /* persistence */
387 ushort sen_rfbdptr; /* Rx first BD pointer */
388 ushort sen_tfbdptr; /* Tx first BD pointer */
389 ushort sen_tlbdptr; /* Tx last BD pointer */
390 uint sen_tbuf1data0; /* Save area 0 - current frame */
391 uint sen_tbuf1data1; /* Save area 1 - current frame */
392 uint sen_tbuf1rba; /* Internal */
393 uint sen_tbuf1crc; /* Internal */
394 ushort sen_tbuf1bcnt; /* Internal */
395 ushort sen_txlen; /* Tx Frame length counter */
396 ushort sen_iaddr1; /* Individual address filter */
400 ushort sen_boffcnt; /* Backoff counter */
402 /* NOTE: Some versions of the manual have the following items
403 * incorrectly documented. Below is the proper order.
405 ushort sen_taddrh; /* temp address (MSB) */
407 ushort sen_taddrl; /* temp address (LSB) */
411 /* SCC Event register as used by Ethernet.
413 #define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
414 #define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
415 #define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
416 #define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
417 #define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
418 #define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
420 /* SCC Mode Register (PSMR) as used by Ethernet.
422 #define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */
423 #define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */
424 #define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */
425 #define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */
426 #define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
427 #define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */
428 #define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
429 #define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */
430 #define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */
431 #define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */
432 #define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */
433 #define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
434 #define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */
436 /* Buffer descriptor control/status used by Ethernet receive.
437 * Common to SCC and FCC.
439 #define BD_ENET_RX_EMPTY ((ushort)0x8000)
440 #define BD_ENET_RX_WRAP ((ushort)0x2000)
441 #define BD_ENET_RX_INTR ((ushort)0x1000)
442 #define BD_ENET_RX_LAST ((ushort)0x0800)
443 #define BD_ENET_RX_FIRST ((ushort)0x0400)
444 #define BD_ENET_RX_MISS ((ushort)0x0100)
445 #define BD_ENET_RX_BC ((ushort)0x0080) /* FCC Only */
446 #define BD_ENET_RX_MC ((ushort)0x0040) /* FCC Only */
447 #define BD_ENET_RX_LG ((ushort)0x0020)
448 #define BD_ENET_RX_NO ((ushort)0x0010)
449 #define BD_ENET_RX_SH ((ushort)0x0008)
450 #define BD_ENET_RX_CR ((ushort)0x0004)
451 #define BD_ENET_RX_OV ((ushort)0x0002)
452 #define BD_ENET_RX_CL ((ushort)0x0001)
453 #define BD_ENET_RX_STATS ((ushort)0x01ff) /* All status bits */
455 /* Buffer descriptor control/status used by Ethernet transmit.
456 * Common to SCC and FCC.
458 #define BD_ENET_TX_READY ((ushort)0x8000)
459 #define BD_ENET_TX_PAD ((ushort)0x4000)
460 #define BD_ENET_TX_WRAP ((ushort)0x2000)
461 #define BD_ENET_TX_INTR ((ushort)0x1000)
462 #define BD_ENET_TX_LAST ((ushort)0x0800)
463 #define BD_ENET_TX_TC ((ushort)0x0400)
464 #define BD_ENET_TX_DEF ((ushort)0x0200)
465 #define BD_ENET_TX_HB ((ushort)0x0100)
466 #define BD_ENET_TX_LC ((ushort)0x0080)
467 #define BD_ENET_TX_RL ((ushort)0x0040)
468 #define BD_ENET_TX_RCMASK ((ushort)0x003c)
469 #define BD_ENET_TX_UN ((ushort)0x0002)
470 #define BD_ENET_TX_CSL ((ushort)0x0001)
471 #define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
475 typedef struct scc_uart {
477 uint scc_res1; /* Reserved */
478 uint scc_res2; /* Reserved */
479 ushort scc_maxidl; /* Maximum idle chars */
480 ushort scc_idlc; /* temp idle counter */
481 ushort scc_brkcr; /* Break count register */
482 ushort scc_parec; /* receive parity error counter */
483 ushort scc_frmec; /* receive framing error counter */
484 ushort scc_nosec; /* receive noise counter */
485 ushort scc_brkec; /* receive break condition counter */
486 ushort scc_brkln; /* last received break length */
487 ushort scc_uaddr1; /* UART address character 1 */
488 ushort scc_uaddr2; /* UART address character 2 */
489 ushort scc_rtemp; /* Temp storage */
490 ushort scc_toseq; /* Transmit out of sequence char */
491 ushort scc_char1; /* control character 1 */
492 ushort scc_char2; /* control character 2 */
493 ushort scc_char3; /* control character 3 */
494 ushort scc_char4; /* control character 4 */
495 ushort scc_char5; /* control character 5 */
496 ushort scc_char6; /* control character 6 */
497 ushort scc_char7; /* control character 7 */
498 ushort scc_char8; /* control character 8 */
499 ushort scc_rccm; /* receive control character mask */
500 ushort scc_rccr; /* receive control character register */
501 ushort scc_rlbc; /* receive last break character */
504 /* SCC Event and Mask registers when it is used as a UART.
506 #define UART_SCCM_GLR ((ushort)0x1000)
507 #define UART_SCCM_GLT ((ushort)0x0800)
508 #define UART_SCCM_AB ((ushort)0x0200)
509 #define UART_SCCM_IDL ((ushort)0x0100)
510 #define UART_SCCM_GRA ((ushort)0x0080)
511 #define UART_SCCM_BRKE ((ushort)0x0040)
512 #define UART_SCCM_BRKS ((ushort)0x0020)
513 #define UART_SCCM_CCR ((ushort)0x0008)
514 #define UART_SCCM_BSY ((ushort)0x0004)
515 #define UART_SCCM_TX ((ushort)0x0002)
516 #define UART_SCCM_RX ((ushort)0x0001)
518 /* The SCC PSMR when used as a UART.
520 #define SCU_PSMR_FLC ((ushort)0x8000)
521 #define SCU_PSMR_SL ((ushort)0x4000)
522 #define SCU_PSMR_CL ((ushort)0x3000)
523 #define SCU_PSMR_UM ((ushort)0x0c00)
524 #define SCU_PSMR_FRZ ((ushort)0x0200)
525 #define SCU_PSMR_RZS ((ushort)0x0100)
526 #define SCU_PSMR_SYN ((ushort)0x0080)
527 #define SCU_PSMR_DRT ((ushort)0x0040)
528 #define SCU_PSMR_PEN ((ushort)0x0010)
529 #define SCU_PSMR_RPM ((ushort)0x000c)
530 #define SCU_PSMR_REVP ((ushort)0x0008)
531 #define SCU_PSMR_TPM ((ushort)0x0003)
532 #define SCU_PSMR_TEVP ((ushort)0x0003)
534 /* CPM Transparent mode SCC.
536 typedef struct scc_trans {
538 uint st_cpres; /* Preset CRC */
539 uint st_cmask; /* Constant mask for CRC */
542 #define BD_SCC_TX_LAST ((ushort)0x0800)
544 /* How about some FCCs.....
546 #define FCC_GFMR_DIAG_NORM ((uint)0x00000000)
547 #define FCC_GFMR_DIAG_LE ((uint)0x40000000)
548 #define FCC_GFMR_DIAG_AE ((uint)0x80000000)
549 #define FCC_GFMR_DIAG_ALE ((uint)0xc0000000)
550 #define FCC_GFMR_TCI ((uint)0x20000000)
551 #define FCC_GFMR_TRX ((uint)0x10000000)
552 #define FCC_GFMR_TTX ((uint)0x08000000)
553 #define FCC_GFMR_TTX ((uint)0x08000000)
554 #define FCC_GFMR_CDP ((uint)0x04000000)
555 #define FCC_GFMR_CTSP ((uint)0x02000000)
556 #define FCC_GFMR_CDS ((uint)0x01000000)
557 #define FCC_GFMR_CTSS ((uint)0x00800000)
558 #define FCC_GFMR_SYNL_NONE ((uint)0x00000000)
559 #define FCC_GFMR_SYNL_AUTO ((uint)0x00004000)
560 #define FCC_GFMR_SYNL_8 ((uint)0x00008000)
561 #define FCC_GFMR_SYNL_16 ((uint)0x0000c000)
562 #define FCC_GFMR_RTSM ((uint)0x00002000)
563 #define FCC_GFMR_RENC_NRZ ((uint)0x00000000)
564 #define FCC_GFMR_RENC_NRZI ((uint)0x00000800)
565 #define FCC_GFMR_REVD ((uint)0x00000400)
566 #define FCC_GFMR_TENC_NRZ ((uint)0x00000000)
567 #define FCC_GFMR_TENC_NRZI ((uint)0x00000100)
568 #define FCC_GFMR_TCRC_16 ((uint)0x00000000)
569 #define FCC_GFMR_TCRC_32 ((uint)0x00000080)
570 #define FCC_GFMR_ENR ((uint)0x00000020)
571 #define FCC_GFMR_ENT ((uint)0x00000010)
572 #define FCC_GFMR_MODE_ENET ((uint)0x0000000c)
573 #define FCC_GFMR_MODE_ATM ((uint)0x0000000a)
574 #define FCC_GFMR_MODE_HDLC ((uint)0x00000000)
576 /* Generic FCC parameter ram.
578 typedef struct fcc_param {
579 ushort fcc_riptr; /* Rx Internal temp pointer */
580 ushort fcc_tiptr; /* Tx Internal temp pointer */
582 ushort fcc_mrblr; /* Max receive buffer length, mod 32 bytes */
583 uint fcc_rstate; /* Upper byte is Func code, must be set */
584 uint fcc_rbase; /* Receive BD base */
585 ushort fcc_rbdstat; /* RxBD status */
586 ushort fcc_rbdlen; /* RxBD down counter */
587 uint fcc_rdptr; /* RxBD internal data pointer */
588 uint fcc_tstate; /* Upper byte is Func code, must be set */
589 uint fcc_tbase; /* Transmit BD base */
590 ushort fcc_tbdstat; /* TxBD status */
591 ushort fcc_tbdlen; /* TxBD down counter */
592 uint fcc_tdptr; /* TxBD internal data pointer */
593 uint fcc_rbptr; /* Rx BD Internal buf pointer */
594 uint fcc_tbptr; /* Tx BD Internal buf pointer */
595 uint fcc_rcrc; /* Rx temp CRC */
597 uint fcc_tcrc; /* Tx temp CRC */
601 /* Ethernet controller through FCC.
603 typedef struct fcc_enet {
605 uint fen_statbuf; /* Internal status buffer */
606 uint fen_camptr; /* CAM address */
607 uint fen_cmask; /* Constant mask for CRC */
608 uint fen_cpres; /* Preset CRC */
609 uint fen_crcec; /* CRC Error counter */
610 uint fen_alec; /* alignment error counter */
611 uint fen_disfc; /* discard frame counter */
612 ushort fen_retlim; /* Retry limit */
613 ushort fen_retcnt; /* Retry counter */
614 ushort fen_pper; /* Persistence */
615 ushort fen_boffcnt; /* backoff counter */
616 uint fen_gaddrh; /* Group address filter, high 32-bits */
617 uint fen_gaddrl; /* Group address filter, low 32-bits */
618 ushort fen_tfcstat; /* out of sequence TxBD */
621 ushort fen_mflr; /* Maximum frame length (1518) */
622 ushort fen_paddrh; /* MAC address */
625 ushort fen_ibdcount; /* Internal BD counter */
626 ushort fen_idbstart; /* Internal BD start pointer */
627 ushort fen_ibdend; /* Internal BD end pointer */
628 ushort fen_txlen; /* Internal Tx frame length counter */
629 uint fen_ibdbase[8]; /* Internal use */
630 uint fen_iaddrh; /* Individual address filter */
632 ushort fen_minflr; /* Minimum frame length (64) */
633 ushort fen_taddrh; /* Filter transfer MAC address */
636 ushort fen_padptr; /* Pointer to pad byte buffer */
637 ushort fen_cftype; /* control frame type */
638 ushort fen_cfrange; /* control frame range */
639 ushort fen_maxb; /* maximum BD count */
640 ushort fen_maxd1; /* Max DMA1 length (1520) */
641 ushort fen_maxd2; /* Max DMA2 length (1520) */
642 ushort fen_maxd; /* internal max DMA count */
643 ushort fen_dmacnt; /* internal DMA counter */
644 uint fen_octc; /* Total octect counter */
645 uint fen_colc; /* Total collision counter */
646 uint fen_broc; /* Total broadcast packet counter */
647 uint fen_mulc; /* Total multicast packet count */
648 uint fen_uspc; /* Total packets < 64 bytes */
649 uint fen_frgc; /* Total packets < 64 bytes with errors */
650 uint fen_ospc; /* Total packets > 1518 */
651 uint fen_jbrc; /* Total packets > 1518 with errors */
652 uint fen_p64c; /* Total packets == 64 bytes */
653 uint fen_p65c; /* Total packets 64 < bytes <= 127 */
654 uint fen_p128c; /* Total packets 127 < bytes <= 255 */
655 uint fen_p256c; /* Total packets 256 < bytes <= 511 */
656 uint fen_p512c; /* Total packets 512 < bytes <= 1023 */
657 uint fen_p1024c; /* Total packets 1024 < bytes <= 1518 */
658 uint fen_cambuf; /* Internal CAM buffer poiner */
659 ushort fen_rfthr; /* Received frames threshold */
660 ushort fen_rfcnt; /* Received frames count */
663 /* FCC Event/Mask register as used by Ethernet.
665 #define FCC_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
666 #define FCC_ENET_RXC ((ushort)0x0040) /* Control Frame Received */
667 #define FCC_ENET_TXC ((ushort)0x0020) /* Out of seq. Tx sent */
668 #define FCC_ENET_TXE ((ushort)0x0010) /* Transmit Error */
669 #define FCC_ENET_RXF ((ushort)0x0008) /* Full frame received */
670 #define FCC_ENET_BSY ((ushort)0x0004) /* Busy. Rx Frame dropped */
671 #define FCC_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
672 #define FCC_ENET_RXB ((ushort)0x0001) /* A buffer was received */
674 /* FCC Mode Register (FPSMR) as used by Ethernet.
676 #define FCC_PSMR_HBC ((uint)0x80000000) /* Enable heartbeat */
677 #define FCC_PSMR_FC ((uint)0x40000000) /* Force Collision */
678 #define FCC_PSMR_SBT ((uint)0x20000000) /* Stop backoff timer */
679 #define FCC_PSMR_LPB ((uint)0x10000000) /* Local protect. 1 = FDX */
680 #define FCC_PSMR_LCW ((uint)0x08000000) /* Late collision select */
681 #define FCC_PSMR_FDE ((uint)0x04000000) /* Full Duplex Enable */
682 #define FCC_PSMR_MON ((uint)0x02000000) /* RMON Enable */
683 #define FCC_PSMR_PRO ((uint)0x00400000) /* Promiscuous Enable */
684 #define FCC_PSMR_FCE ((uint)0x00200000) /* Flow Control Enable */
685 #define FCC_PSMR_RSH ((uint)0x00100000) /* Receive Short Frames */
686 #define FCC_PSMR_CAM ((uint)0x00000400) /* CAM enable */
687 #define FCC_PSMR_BRO ((uint)0x00000200) /* Broadcast pkt discard */
688 #define FCC_PSMR_ENCRC ((uint)0x00000080) /* Use 32-bit CRC */
690 /* IIC parameter RAM.
693 ushort iic_rbase; /* Rx Buffer descriptor base address */
694 ushort iic_tbase; /* Tx Buffer descriptor base address */
695 u_char iic_rfcr; /* Rx function code */
696 u_char iic_tfcr; /* Tx function code */
697 ushort iic_mrblr; /* Max receive buffer length */
698 uint iic_rstate; /* Internal */
699 uint iic_rdp; /* Internal */
700 ushort iic_rbptr; /* Internal */
701 ushort iic_rbc; /* Internal */
702 uint iic_rxtmp; /* Internal */
703 uint iic_tstate; /* Internal */
704 uint iic_tdp; /* Internal */
705 ushort iic_tbptr; /* Internal */
706 ushort iic_tbc; /* Internal */
707 uint iic_txtmp; /* Internal */
710 /* SPI parameter RAM.
713 ushort spi_rbase; /* Rx Buffer descriptor base address */
714 ushort spi_tbase; /* Tx Buffer descriptor base address */
715 u_char spi_rfcr; /* Rx function code */
716 u_char spi_tfcr; /* Tx function code */
717 ushort spi_mrblr; /* Max receive buffer length */
718 uint spi_rstate; /* Internal */
719 uint spi_rdp; /* Internal */
720 ushort spi_rbptr; /* Internal */
721 ushort spi_rbc; /* Internal */
722 uint spi_rxtmp; /* Internal */
723 uint spi_tstate; /* Internal */
724 uint spi_tdp; /* Internal */
725 ushort spi_tbptr; /* Internal */
726 ushort spi_tbc; /* Internal */
727 uint spi_txtmp; /* Internal */
728 uint spi_res; /* Tx temp. */
729 uint spi_res1[4]; /* SDMA temp. */
732 /* SPI Mode register.
734 #define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
735 #define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
736 #define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
737 #define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
738 #define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
739 #define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
740 #define SPMODE_EN ((ushort)0x0100) /* Enable */
741 #define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
742 #define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
744 #define SPMODE_LEN(x) ((((x)-1)&0xF)<<4)
745 #define SPMODE_PM(x) ((x) &0xF)
747 /* SPI Event/Mask register.
749 #define SPI_EMASK 0x37 /* Event Mask */
750 #define SPI_MME 0x20 /* Multi-Master Error */
751 #define SPI_TXE 0x10 /* Transmit Error */
752 #define SPI_BSY 0x04 /* Busy */
753 #define SPI_TXB 0x02 /* Tx Buffer Empty */
754 #define SPI_RXB 0x01 /* RX Buffer full/closed */
756 #define SPI_STR 0x80 /* SPCOM: Start transmit */
758 #define SPI_EB ((u_char)0x10) /* big endian byte order */
760 #define BD_IIC_START ((ushort)0x0400)
762 #endif /* __CPM_82XX__ */