PR 10450

[platform/upstream/binutils.git] / gold / layout.cc

// layout.cc -- lay out output file sections for gold

// Copyright 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
// Written by Ian Lance Taylor <iant@google.com>.

// This file is part of gold.

// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
// MA 02110-1301, USA.

#include "gold.h"

#include <cerrno>
#include <cstring>
#include <algorithm>
#include <iostream>
#include <utility>
#include <fcntl.h>
#include <unistd.h>
#include "libiberty.h"
#include "md5.h"
#include "sha1.h"

#include "parameters.h"
#include "options.h"
#include "mapfile.h"
#include "script.h"
#include "script-sections.h"
#include "output.h"
#include "symtab.h"
#include "dynobj.h"
#include "ehframe.h"
#include "compressed_output.h"
#include "reduced_debug_output.h"
#include "reloc.h"
#include "descriptors.h"
#include "plugin.h"
#include "incremental.h"
#include "layout.h"

namespace gold
{

// Layout::Relaxation_debug_check methods.

// Check that sections and special data are in reset states.
// We do not save states for Output_sections and special Output_data.
// So we check that they have not assigned any addresses or offsets.
// clean_up_after_relaxation simply resets their addresses and offsets.
void
Layout::Relaxation_debug_check::check_output_data_for_reset_values(
    const Layout::Section_list& sections,
    const Layout::Data_list& special_outputs)
{
  for(Layout::Section_list::const_iterator p = sections.begin();
      p != sections.end();
      ++p)
    gold_assert((*p)->address_and_file_offset_have_reset_values());

  for(Layout::Data_list::const_iterator p = special_outputs.begin();
      p != special_outputs.end();
      ++p)
    gold_assert((*p)->address_and_file_offset_have_reset_values());
}
  
// Save information of SECTIONS for checking later.

void
Layout::Relaxation_debug_check::read_sections(
    const Layout::Section_list& sections)
{
  for(Layout::Section_list::const_iterator p = sections.begin();
      p != sections.end();
      ++p)
    {
      Output_section* os = *p;
      Section_info info;
      info.output_section = os;
      info.address = os->is_address_valid() ? os->address() : 0;
      info.data_size = os->is_data_size_valid() ? os->data_size() : -1;
      info.offset = os->is_offset_valid()? os->offset() : -1 ;
      this->section_infos_.push_back(info);
    }
}

// Verify SECTIONS using previously recorded information.

void
Layout::Relaxation_debug_check::verify_sections(
    const Layout::Section_list& sections)
{
  size_t i = 0;
  for(Layout::Section_list::const_iterator p = sections.begin();
      p != sections.end();
      ++p, ++i)
    {
      Output_section* os = *p;
      uint64_t address = os->is_address_valid() ? os->address() : 0;
      off_t data_size = os->is_data_size_valid() ? os->data_size() : -1;
      off_t offset = os->is_offset_valid()? os->offset() : -1 ;

      if (i >= this->section_infos_.size())
        {
          gold_fatal("Section_info of %s missing.\n", os->name());
        }
      const Section_info& info = this->section_infos_[i];
      if (os != info.output_section)
        gold_fatal("Section order changed.  Expecting %s but see %s\n",
                   info.output_section->name(), os->name());
      if (address != info.address
          || data_size != info.data_size
          || offset != info.offset)
        gold_fatal("Section %s changed.\n", os->name());
    }
}

// Layout_task_runner methods.

// Lay out the sections.  This is called after all the input objects
// have been read.

void
Layout_task_runner::run(Workqueue* workqueue, const Task* task)
{
  off_t file_size = this->layout_->finalize(this->input_objects_,
                                            this->symtab_,
                                            this->target_,
                                            task);

  // Now we know the final size of the output file and we know where
  // each piece of information goes.

  if (this->mapfile_ != NULL)
    {
      this->mapfile_->print_discarded_sections(this->input_objects_);
      this->layout_->print_to_mapfile(this->mapfile_);
    }

  Output_file* of = new Output_file(parameters->options().output_file_name());
  if (this->options_.oformat_enum() != General_options::OBJECT_FORMAT_ELF)
    of->set_is_temporary();
  of->open(file_size);

  // Queue up the final set of tasks.
  gold::queue_final_tasks(this->options_, this->input_objects_,
                          this->symtab_, this->layout_, workqueue, of);
}

// Layout methods.

Layout::Layout(int number_of_input_files, Script_options* script_options)
  : number_of_input_files_(number_of_input_files),
    script_options_(script_options),
    namepool_(),
    sympool_(),
    dynpool_(),
    signatures_(),
    section_name_map_(),
    segment_list_(),
    section_list_(),
    unattached_section_list_(),
    special_output_list_(),
    section_headers_(NULL),
    tls_segment_(NULL),
    relro_segment_(NULL),
    increase_relro_(0),
    symtab_section_(NULL),
    symtab_xindex_(NULL),
    dynsym_section_(NULL),
    dynsym_xindex_(NULL),
    dynamic_section_(NULL),
    dynamic_symbol_(NULL),
    dynamic_data_(NULL),
    eh_frame_section_(NULL),
    eh_frame_data_(NULL),
    added_eh_frame_data_(false),
    eh_frame_hdr_section_(NULL),
    build_id_note_(NULL),
    debug_abbrev_(NULL),
    debug_info_(NULL),
    group_signatures_(),
    output_file_size_(-1),
    sections_are_attached_(false),
    input_requires_executable_stack_(false),
    input_with_gnu_stack_note_(false),
    input_without_gnu_stack_note_(false),
    has_static_tls_(false),
    any_postprocessing_sections_(false),
    resized_signatures_(false),
    have_stabstr_section_(false),
    incremental_inputs_(NULL),
    record_output_section_data_from_script_(false),
    script_output_section_data_list_(),
    segment_states_(NULL),
    relaxation_debug_check_(NULL)
{
  // Make space for more than enough segments for a typical file.
  // This is just for efficiency--it's OK if we wind up needing more.
  this->segment_list_.reserve(12);

  // We expect two unattached Output_data objects: the file header and
  // the segment headers.
  this->special_output_list_.reserve(2);

  // Initialize structure needed for an incremental build.
  if (parameters->options().incremental())
    this->incremental_inputs_ = new Incremental_inputs;

  // The section name pool is worth optimizing in all cases, because
  // it is small, but there are often overlaps due to .rel sections.
  this->namepool_.set_optimize();
}

// Hash a key we use to look up an output section mapping.

size_t
Layout::Hash_key::operator()(const Layout::Key& k) const
{
 return k.first + k.second.first + k.second.second;
}

// Returns whether the given section is in the list of
// debug-sections-used-by-some-version-of-gdb.  Currently,
// we've checked versions of gdb up to and including 6.7.1.

static const char* gdb_sections[] =
{ ".debug_abbrev",
  // ".debug_aranges",   // not used by gdb as of 6.7.1
  ".debug_frame",
  ".debug_info",
  ".debug_line",
  ".debug_loc",
  ".debug_macinfo",
  // ".debug_pubnames",  // not used by gdb as of 6.7.1
  ".debug_ranges",
  ".debug_str",
};

static const char* lines_only_debug_sections[] =
{ ".debug_abbrev",
  // ".debug_aranges",   // not used by gdb as of 6.7.1
  // ".debug_frame",
  ".debug_info",
  ".debug_line",
  // ".debug_loc",
  // ".debug_macinfo",
  // ".debug_pubnames",  // not used by gdb as of 6.7.1
  // ".debug_ranges",
  ".debug_str",
};

static inline bool
is_gdb_debug_section(const char* str)
{
  // We can do this faster: binary search or a hashtable.  But why bother?
  for (size_t i = 0; i < sizeof(gdb_sections)/sizeof(*gdb_sections); ++i)
    if (strcmp(str, gdb_sections[i]) == 0)
      return true;
  return false;
}

static inline bool
is_lines_only_debug_section(const char* str)
{
  // We can do this faster: binary search or a hashtable.  But why bother?
  for (size_t i = 0;
       i < sizeof(lines_only_debug_sections)/sizeof(*lines_only_debug_sections);
       ++i)
    if (strcmp(str, lines_only_debug_sections[i]) == 0)
      return true;
  return false;
}

// Whether to include this section in the link.

template<int size, bool big_endian>
bool
Layout::include_section(Sized_relobj<size, big_endian>*, const char* name,
                        const elfcpp::Shdr<size, big_endian>& shdr)
{
  if (shdr.get_sh_flags() & elfcpp::SHF_EXCLUDE)
    return false;

  switch (shdr.get_sh_type())
    {
    case elfcpp::SHT_NULL:
    case elfcpp::SHT_SYMTAB:
    case elfcpp::SHT_DYNSYM:
    case elfcpp::SHT_HASH:
    case elfcpp::SHT_DYNAMIC:
    case elfcpp::SHT_SYMTAB_SHNDX:
      return false;

    case elfcpp::SHT_STRTAB:
      // Discard the sections which have special meanings in the ELF
      // ABI.  Keep others (e.g., .stabstr).  We could also do this by
      // checking the sh_link fields of the appropriate sections.
      return (strcmp(name, ".dynstr") != 0
              && strcmp(name, ".strtab") != 0
              && strcmp(name, ".shstrtab") != 0);

    case elfcpp::SHT_RELA:
    case elfcpp::SHT_REL:
    case elfcpp::SHT_GROUP:
      // If we are emitting relocations these should be handled
      // elsewhere.
      gold_assert(!parameters->options().relocatable()
                  && !parameters->options().emit_relocs());
      return false;

    case elfcpp::SHT_PROGBITS:
      if (parameters->options().strip_debug()
          && (shdr.get_sh_flags() & elfcpp::SHF_ALLOC) == 0)
        {
          if (is_debug_info_section(name))
            return false;
        }
      if (parameters->options().strip_debug_non_line()
          && (shdr.get_sh_flags() & elfcpp::SHF_ALLOC) == 0)
        {
          // Debugging sections can only be recognized by name.
          if (is_prefix_of(".debug", name)
              && !is_lines_only_debug_section(name))
            return false;
        }
      if (parameters->options().strip_debug_gdb()
          && (shdr.get_sh_flags() & elfcpp::SHF_ALLOC) == 0)
        {
          // Debugging sections can only be recognized by name.
          if (is_prefix_of(".debug", name)
              && !is_gdb_debug_section(name))
            return false;
        }
      if (parameters->options().strip_lto_sections()
          && !parameters->options().relocatable()
          && (shdr.get_sh_flags() & elfcpp::SHF_ALLOC) == 0)
        {
          // Ignore LTO sections containing intermediate code.
          if (is_prefix_of(".gnu.lto_", name))
            return false;
        }
      return true;

    default:
      return true;
    }
}

// Return an output section named NAME, or NULL if there is none.

Output_section*
Layout::find_output_section(const char* name) const
{
  for (Section_list::const_iterator p = this->section_list_.begin();
       p != this->section_list_.end();
       ++p)
    if (strcmp((*p)->name(), name) == 0)
      return *p;
  return NULL;
}

// Return an output segment of type TYPE, with segment flags SET set
// and segment flags CLEAR clear.  Return NULL if there is none.

Output_segment*
Layout::find_output_segment(elfcpp::PT type, elfcpp::Elf_Word set,
                            elfcpp::Elf_Word clear) const
{
  for (Segment_list::const_iterator p = this->segment_list_.begin();
       p != this->segment_list_.end();
       ++p)
    if (static_cast<elfcpp::PT>((*p)->type()) == type
        && ((*p)->flags() & set) == set
        && ((*p)->flags() & clear) == 0)
      return *p;
  return NULL;
}

// Return the output section to use for section NAME with type TYPE
// and section flags FLAGS.  NAME must be canonicalized in the string
// pool, and NAME_KEY is the key.  IS_INTERP is true if this is the
// .interp section.  IS_DYNAMIC_LINKER_SECTION is true if this section
// is used by the dynamic linker.  IS_RELRO is true for a relro
// section.  IS_LAST_RELRO is true for the last relro section.
// IS_FIRST_NON_RELRO is true for the first non-relro section.

Output_section*
Layout::get_output_section(const char* name, Stringpool::Key name_key,
                           elfcpp::Elf_Word type, elfcpp::Elf_Xword flags,
                           bool is_interp, bool is_dynamic_linker_section,
                           bool is_relro, bool is_last_relro,
                           bool is_first_non_relro)
{
  elfcpp::Elf_Xword lookup_flags = flags;

  // Ignoring SHF_WRITE and SHF_EXECINSTR here means that we combine
  // read-write with read-only sections.  Some other ELF linkers do
  // not do this.  FIXME: Perhaps there should be an option
  // controlling this.
  lookup_flags &= ~(elfcpp::SHF_WRITE | elfcpp::SHF_EXECINSTR);

  const Key key(name_key, std::make_pair(type, lookup_flags));
  const std::pair<Key, Output_section*> v(key, NULL);
  std::pair<Section_name_map::iterator, bool> ins(
    this->section_name_map_.insert(v));

  if (!ins.second)
    return ins.first->second;
  else
    {
      // This is the first time we've seen this name/type/flags
      // combination.  For compatibility with the GNU linker, we
      // combine sections with contents and zero flags with sections
      // with non-zero flags.  This is a workaround for cases where
      // assembler code forgets to set section flags.  FIXME: Perhaps
      // there should be an option to control this.
      Output_section* os = NULL;

      if (type == elfcpp::SHT_PROGBITS)
        {
          if (flags == 0)
            {
              Output_section* same_name = this->find_output_section(name);
              if (same_name != NULL
                  && same_name->type() == elfcpp::SHT_PROGBITS
                  && (same_name->flags() & elfcpp::SHF_TLS) == 0)
                os = same_name;
            }
          else if ((flags & elfcpp::SHF_TLS) == 0)
            {
              elfcpp::Elf_Xword zero_flags = 0;
              const Key zero_key(name_key, std::make_pair(type, zero_flags));
              Section_name_map::iterator p =
                  this->section_name_map_.find(zero_key);
              if (p != this->section_name_map_.end())
                os = p->second;
            }
        }

      if (os == NULL)
        os = this->make_output_section(name, type, flags, is_interp,
                                       is_dynamic_linker_section, is_relro,
                                       is_last_relro, is_first_non_relro);
      ins.first->second = os;
      return os;
    }
}

// Pick the output section to use for section NAME, in input file
// RELOBJ, with type TYPE and flags FLAGS.  RELOBJ may be NULL for a
// linker created section.  IS_INPUT_SECTION is true if we are
// choosing an output section for an input section found in a input
// file.  IS_INTERP is true if this is the .interp section.
// IS_DYNAMIC_LINKER_SECTION is true if this section is used by the
// dynamic linker.  IS_RELRO is true for a relro section.
// IS_LAST_RELRO is true for the last relro section.
// IS_FIRST_NON_RELRO is true for the first non-relro section.  This
// will return NULL if the input section should be discarded.

Output_section*
Layout::choose_output_section(const Relobj* relobj, const char* name,
                              elfcpp::Elf_Word type, elfcpp::Elf_Xword flags,
                              bool is_input_section, bool is_interp,
                              bool is_dynamic_linker_section, bool is_relro,
                              bool is_last_relro, bool is_first_non_relro)
{
  // We should not see any input sections after we have attached
  // sections to segments.
  gold_assert(!is_input_section || !this->sections_are_attached_);

  // Some flags in the input section should not be automatically
  // copied to the output section.
  flags &= ~ (elfcpp::SHF_INFO_LINK
              | elfcpp::SHF_LINK_ORDER
              | elfcpp::SHF_GROUP
              | elfcpp::SHF_MERGE
              | elfcpp::SHF_STRINGS);

  if (this->script_options_->saw_sections_clause())
    {
      // We are using a SECTIONS clause, so the output section is
      // chosen based only on the name.

      Script_sections* ss = this->script_options_->script_sections();
      const char* file_name = relobj == NULL ? NULL : relobj->name().c_str();
      Output_section** output_section_slot;
      name = ss->output_section_name(file_name, name, &output_section_slot);
      if (name == NULL)
        {
          // The SECTIONS clause says to discard this input section.
          return NULL;
        }

      // If this is an orphan section--one not mentioned in the linker
      // script--then OUTPUT_SECTION_SLOT will be NULL, and we do the
      // default processing below.

      if (output_section_slot != NULL)
        {
          if (*output_section_slot != NULL)
            {
              (*output_section_slot)->update_flags_for_input_section(flags);
              return *output_section_slot;
            }

          // We don't put sections found in the linker script into
          // SECTION_NAME_MAP_.  That keeps us from getting confused
          // if an orphan section is mapped to a section with the same
          // name as one in the linker script.

          name = this->namepool_.add(name, false, NULL);

          Output_section* os =
            this->make_output_section(name, type, flags, is_interp,
                                      is_dynamic_linker_section, is_relro,
                                      is_last_relro, is_first_non_relro);
          os->set_found_in_sections_clause();
          *output_section_slot = os;
          return os;
        }
    }

  // FIXME: Handle SHF_OS_NONCONFORMING somewhere.

  // Turn NAME from the name of the input section into the name of the
  // output section.

  size_t len = strlen(name);
  if (is_input_section
      && !this->script_options_->saw_sections_clause()
      && !parameters->options().relocatable())
    name = Layout::output_section_name(name, &len);

  Stringpool::Key name_key;
  name = this->namepool_.add_with_length(name, len, true, &name_key);

  // Find or make the output section.  The output section is selected
  // based on the section name, type, and flags.
  return this->get_output_section(name, name_key, type, flags, is_interp,
                                  is_dynamic_linker_section, is_relro,
                                  is_last_relro, is_first_non_relro);
}

// Return the output section to use for input section SHNDX, with name
// NAME, with header HEADER, from object OBJECT.  RELOC_SHNDX is the
// index of a relocation section which applies to this section, or 0
// if none, or -1U if more than one.  RELOC_TYPE is the type of the
// relocation section if there is one.  Set *OFF to the offset of this
// input section without the output section.  Return NULL if the
// section should be discarded.  Set *OFF to -1 if the section
// contents should not be written directly to the output file, but
// will instead receive special handling.

template<int size, bool big_endian>
Output_section*
Layout::layout(Sized_relobj<size, big_endian>* object, unsigned int shndx,
               const char* name, const elfcpp::Shdr<size, big_endian>& shdr,
               unsigned int reloc_shndx, unsigned int, off_t* off)
{
  *off = 0;

  if (!this->include_section(object, name, shdr))
    return NULL;

  Output_section* os;

  // In a relocatable link a grouped section must not be combined with
  // any other sections.
  if (parameters->options().relocatable()
      && (shdr.get_sh_flags() & elfcpp::SHF_GROUP) != 0)
    {
      name = this->namepool_.add(name, true, NULL);
      os = this->make_output_section(name, shdr.get_sh_type(),
                                     shdr.get_sh_flags(), false, false,
                                     false, false, false);
    }
  else
    {
      os = this->choose_output_section(object, name, shdr.get_sh_type(),
                                       shdr.get_sh_flags(), true, false,
                                       false, false, false, false);
      if (os == NULL)
        return NULL;
    }

  // By default the GNU linker sorts input sections whose names match
  // .ctor.*, .dtor.*, .init_array.*, or .fini_array.*.  The sections
  // are sorted by name.  This is used to implement constructor
  // priority ordering.  We are compatible.
  if (!this->script_options_->saw_sections_clause()
      && (is_prefix_of(".ctors.", name)
          || is_prefix_of(".dtors.", name)
          || is_prefix_of(".init_array.", name)
          || is_prefix_of(".fini_array.", name)))
    os->set_must_sort_attached_input_sections();

  // FIXME: Handle SHF_LINK_ORDER somewhere.

  *off = os->add_input_section(object, shndx, name, shdr, reloc_shndx,
                               this->script_options_->saw_sections_clause());

  return os;
}

// Handle a relocation section when doing a relocatable link.

template<int size, bool big_endian>
Output_section*
Layout::layout_reloc(Sized_relobj<size, big_endian>* object,
                     unsigned int,
                     const elfcpp::Shdr<size, big_endian>& shdr,
                     Output_section* data_section,
                     Relocatable_relocs* rr)
{
  gold_assert(parameters->options().relocatable()
              || parameters->options().emit_relocs());

  int sh_type = shdr.get_sh_type();

  std::string name;
  if (sh_type == elfcpp::SHT_REL)
    name = ".rel";
  else if (sh_type == elfcpp::SHT_RELA)
    name = ".rela";
  else
    gold_unreachable();
  name += data_section->name();

  Output_section* os = this->choose_output_section(object, name.c_str(),
                                                   sh_type,
                                                   shdr.get_sh_flags(),
                                                   false, false, false,
                                                   false, false, false);

  os->set_should_link_to_symtab();
  os->set_info_section(data_section);

  Output_section_data* posd;
  if (sh_type == elfcpp::SHT_REL)
    {
      os->set_entsize(elfcpp::Elf_sizes<size>::rel_size);
      posd = new Output_relocatable_relocs<elfcpp::SHT_REL,
                                           size,
                                           big_endian>(rr);
    }
  else if (sh_type == elfcpp::SHT_RELA)
    {
      os->set_entsize(elfcpp::Elf_sizes<size>::rela_size);
      posd = new Output_relocatable_relocs<elfcpp::SHT_RELA,
                                           size,
                                           big_endian>(rr);
    }
  else
    gold_unreachable();

  os->add_output_section_data(posd);
  rr->set_output_data(posd);

  return os;
}

// Handle a group section when doing a relocatable link.

template<int size, bool big_endian>
void
Layout::layout_group(Symbol_table* symtab,
                     Sized_relobj<size, big_endian>* object,
                     unsigned int,
                     const char* group_section_name,
                     const char* signature,
                     const elfcpp::Shdr<size, big_endian>& shdr,
                     elfcpp::Elf_Word flags,
                     std::vector<unsigned int>* shndxes)
{
  gold_assert(parameters->options().relocatable());
  gold_assert(shdr.get_sh_type() == elfcpp::SHT_GROUP);
  group_section_name = this->namepool_.add(group_section_name, true, NULL);
  Output_section* os = this->make_output_section(group_section_name,
                                                 elfcpp::SHT_GROUP,
                                                 shdr.get_sh_flags(),
                                                 false, false, false,
                                                 false, false);

  // We need to find a symbol with the signature in the symbol table.
  // If we don't find one now, we need to look again later.
  Symbol* sym = symtab->lookup(signature, NULL);
  if (sym != NULL)
    os->set_info_symndx(sym);
  else
    {
      // Reserve some space to minimize reallocations.
      if (this->group_signatures_.empty())
        this->group_signatures_.reserve(this->number_of_input_files_ * 16);

      // We will wind up using a symbol whose name is the signature.
      // So just put the signature in the symbol name pool to save it.
      signature = symtab->canonicalize_name(signature);
      this->group_signatures_.push_back(Group_signature(os, signature));
    }

  os->set_should_link_to_symtab();
  os->set_entsize(4);

  section_size_type entry_count =
    convert_to_section_size_type(shdr.get_sh_size() / 4);
  Output_section_data* posd =
    new Output_data_group<size, big_endian>(object, entry_count, flags,
                                            shndxes);
  os->add_output_section_data(posd);
}

// Special GNU handling of sections name .eh_frame.  They will
// normally hold exception frame data as defined by the C++ ABI
// (http://codesourcery.com/cxx-abi/).

template<int size, bool big_endian>
Output_section*
Layout::layout_eh_frame(Sized_relobj<size, big_endian>* object,
                        const unsigned char* symbols,
                        off_t symbols_size,
                        const unsigned char* symbol_names,
                        off_t symbol_names_size,
                        unsigned int shndx,
                        const elfcpp::Shdr<size, big_endian>& shdr,
                        unsigned int reloc_shndx, unsigned int reloc_type,
                        off_t* off)
{
  gold_assert(shdr.get_sh_type() == elfcpp::SHT_PROGBITS);
  gold_assert((shdr.get_sh_flags() & elfcpp::SHF_ALLOC) != 0);

  const char* const name = ".eh_frame";
  Output_section* os = this->choose_output_section(object,
                                                   name,
                                                   elfcpp::SHT_PROGBITS,
                                                   elfcpp::SHF_ALLOC,
                                                   false, false, false,
                                                   false, false, false);
  if (os == NULL)
    return NULL;

  if (this->eh_frame_section_ == NULL)
    {
      this->eh_frame_section_ = os;
      this->eh_frame_data_ = new Eh_frame();

      if (parameters->options().eh_frame_hdr())
        {
          Output_section* hdr_os =
            this->choose_output_section(NULL,
                                        ".eh_frame_hdr",
                                        elfcpp::SHT_PROGBITS,
                                        elfcpp::SHF_ALLOC,
                                        false, false, false,
                                        false, false, false);

          if (hdr_os != NULL)
            {
              Eh_frame_hdr* hdr_posd = new Eh_frame_hdr(os,
                                                        this->eh_frame_data_);
              hdr_os->add_output_section_data(hdr_posd);

              hdr_os->set_after_input_sections();

              if (!this->script_options_->saw_phdrs_clause())
                {
                  Output_segment* hdr_oseg;
                  hdr_oseg = this->make_output_segment(elfcpp::PT_GNU_EH_FRAME,
                                                       elfcpp::PF_R);
                  hdr_oseg->add_output_section(hdr_os, elfcpp::PF_R, false);
                }

              this->eh_frame_data_->set_eh_frame_hdr(hdr_posd);
            }
        }
    }

  gold_assert(this->eh_frame_section_ == os);

  if (this->eh_frame_data_->add_ehframe_input_section(object,
                                                      symbols,
                                                      symbols_size,
                                                      symbol_names,
                                                      symbol_names_size,
                                                      shndx,
                                                      reloc_shndx,
                                                      reloc_type))
    {
      os->update_flags_for_input_section(shdr.get_sh_flags());

      // We found a .eh_frame section we are going to optimize, so now
      // we can add the set of optimized sections to the output
      // section.  We need to postpone adding this until we've found a
      // section we can optimize so that the .eh_frame section in
      // crtbegin.o winds up at the start of the output section.
      if (!this->added_eh_frame_data_)
        {
          os->add_output_section_data(this->eh_frame_data_);
          this->added_eh_frame_data_ = true;
        }
      *off = -1;
    }
  else
    {
      // We couldn't handle this .eh_frame section for some reason.
      // Add it as a normal section.
      bool saw_sections_clause = this->script_options_->saw_sections_clause();
      *off = os->add_input_section(object, shndx, name, shdr, reloc_shndx,
                                   saw_sections_clause);
    }

  return os;
}

// Add POSD to an output section using NAME, TYPE, and FLAGS.  Return
// the output section.

Output_section*
Layout::add_output_section_data(const char* name, elfcpp::Elf_Word type,
                                elfcpp::Elf_Xword flags,
                                Output_section_data* posd,
                                bool is_dynamic_linker_section,
                                bool is_relro, bool is_last_relro,
                                bool is_first_non_relro)
{
  Output_section* os = this->choose_output_section(NULL, name, type, flags,
                                                   false, false,
                                                   is_dynamic_linker_section,
                                                   is_relro, is_last_relro,
                                                   is_first_non_relro);
  if (os != NULL)
    os->add_output_section_data(posd);
  return os;
}

// Map section flags to segment flags.

elfcpp::Elf_Word
Layout::section_flags_to_segment(elfcpp::Elf_Xword flags)
{
  elfcpp::Elf_Word ret = elfcpp::PF_R;
  if ((flags & elfcpp::SHF_WRITE) != 0)
    ret |= elfcpp::PF_W;
  if ((flags & elfcpp::SHF_EXECINSTR) != 0)
    ret |= elfcpp::PF_X;
  return ret;
}

// Sometimes we compress sections.  This is typically done for
// sections that are not part of normal program execution (such as
// .debug_* sections), and where the readers of these sections know
// how to deal with compressed sections.  This routine doesn't say for
// certain whether we'll compress -- it depends on commandline options
// as well -- just whether this section is a candidate for compression.
// (The Output_compressed_section class decides whether to compress
// a given section, and picks the name of the compressed section.)

static bool
is_compressible_debug_section(const char* secname)
{
  return (strncmp(secname, ".debug", sizeof(".debug") - 1) == 0);
}

// Make a new Output_section, and attach it to segments as
// appropriate.  IS_INTERP is true if this is the .interp section.
// IS_DYNAMIC_LINKER_SECTION is true if this section is used by the
// dynamic linker.  IS_RELRO is true if this is a relro section.
// IS_LAST_RELRO is true if this is the last relro section.
// IS_FIRST_NON_RELRO is true if this is the first non relro section.

Output_section*
Layout::make_output_section(const char* name, elfcpp::Elf_Word type,
                            elfcpp::Elf_Xword flags, bool is_interp,
                            bool is_dynamic_linker_section, bool is_relro,
                            bool is_last_relro, bool is_first_non_relro)
{
  Output_section* os;
  if ((flags & elfcpp::SHF_ALLOC) == 0
      && strcmp(parameters->options().compress_debug_sections(), "none") != 0
      && is_compressible_debug_section(name))
    os = new Output_compressed_section(&parameters->options(), name, type,
                                       flags);
  else if ((flags & elfcpp::SHF_ALLOC) == 0
           && parameters->options().strip_debug_non_line()
           && strcmp(".debug_abbrev", name) == 0)
    {
      os = this->debug_abbrev_ = new Output_reduced_debug_abbrev_section(
          name, type, flags);
      if (this->debug_info_)
        this->debug_info_->set_abbreviations(this->debug_abbrev_);
    }
  else if ((flags & elfcpp::SHF_ALLOC) == 0
           && parameters->options().strip_debug_non_line()
           && strcmp(".debug_info", name) == 0)
    {
      os = this->debug_info_ = new Output_reduced_debug_info_section(
          name, type, flags);
      if (this->debug_abbrev_)
        this->debug_info_->set_abbreviations(this->debug_abbrev_);
    }
 else
    {
      // FIXME: const_cast is ugly.
      Target* target = const_cast<Target*>(&parameters->target());
      os = target->make_output_section(name, type, flags);
    }

  if (is_interp)
    os->set_is_interp();
  if (is_dynamic_linker_section)
    os->set_is_dynamic_linker_section();
  if (is_relro)
    os->set_is_relro();
  if (is_last_relro)
    os->set_is_last_relro();
  if (is_first_non_relro)
    os->set_is_first_non_relro();

  parameters->target().new_output_section(os);

  this->section_list_.push_back(os);

  // The GNU linker by default sorts some sections by priority, so we
  // do the same.  We need to know that this might happen before we
  // attach any input sections.
  if (!this->script_options_->saw_sections_clause()
      && (strcmp(name, ".ctors") == 0
          || strcmp(name, ".dtors") == 0
          || strcmp(name, ".init_array") == 0
          || strcmp(name, ".fini_array") == 0))
    os->set_may_sort_attached_input_sections();

  // With -z relro, we have to recognize the special sections by name.
  // There is no other way.
  if (!this->script_options_->saw_sections_clause()
      && parameters->options().relro()
      && type == elfcpp::SHT_PROGBITS
      && (flags & elfcpp::SHF_ALLOC) != 0
      && (flags & elfcpp::SHF_WRITE) != 0)
    {
      if (strcmp(name, ".data.rel.ro") == 0)
        os->set_is_relro();
      else if (strcmp(name, ".data.rel.ro.local") == 0)
        {
          os->set_is_relro();
          os->set_is_relro_local();
        }
    }

  // Check for .stab*str sections, as .stab* sections need to link to
  // them.
  if (type == elfcpp::SHT_STRTAB
      && !this->have_stabstr_section_
      && strncmp(name, ".stab", 5) == 0
      && strcmp(name + strlen(name) - 3, "str") == 0)
    this->have_stabstr_section_ = true;

  // If we have already attached the sections to segments, then we
  // need to attach this one now.  This happens for sections created
  // directly by the linker.
  if (this->sections_are_attached_)
    this->attach_section_to_segment(os);

  return os;
}

// Attach output sections to segments.  This is called after we have
// seen all the input sections.

void
Layout::attach_sections_to_segments()
{
  for (Section_list::iterator p = this->section_list_.begin();
       p != this->section_list_.end();
       ++p)
    this->attach_section_to_segment(*p);

  this->sections_are_attached_ = true;
}

// Attach an output section to a segment.

void
Layout::attach_section_to_segment(Output_section* os)
{
  if ((os->flags() & elfcpp::SHF_ALLOC) == 0)
    this->unattached_section_list_.push_back(os);
  else
    this->attach_allocated_section_to_segment(os);
}

// Attach an allocated output section to a segment.

void
Layout::attach_allocated_section_to_segment(Output_section* os)
{
  elfcpp::Elf_Xword flags = os->flags();
  gold_assert((flags & elfcpp::SHF_ALLOC) != 0);

  if (parameters->options().relocatable())
    return;

  // If we have a SECTIONS clause, we can't handle the attachment to
  // segments until after we've seen all the sections.
  if (this->script_options_->saw_sections_clause())
    return;

  gold_assert(!this->script_options_->saw_phdrs_clause());

  // This output section goes into a PT_LOAD segment.

  elfcpp::Elf_Word seg_flags = Layout::section_flags_to_segment(flags);

  bool sort_sections = !this->script_options_->saw_sections_clause();

  // In general the only thing we really care about for PT_LOAD
  // segments is whether or not they are writable, so that is how we
  // search for them.  Large data sections also go into their own
  // PT_LOAD segment.  People who need segments sorted on some other
  // basis will have to use a linker script.

  Segment_list::const_iterator p;
  for (p = this->segment_list_.begin();
       p != this->segment_list_.end();
       ++p)
    {
      if ((*p)->type() != elfcpp::PT_LOAD)
        continue;
      if (!parameters->options().omagic()
          && ((*p)->flags() & elfcpp::PF_W) != (seg_flags & elfcpp::PF_W))
        continue;
      // If -Tbss was specified, we need to separate the data and BSS
      // segments.
      if (parameters->options().user_set_Tbss())
        {
          if ((os->type() == elfcpp::SHT_NOBITS)
              == (*p)->has_any_data_sections())
            continue;
        }
      if (os->is_large_data_section() && !(*p)->is_large_data_segment())
        continue;

      (*p)->add_output_section(os, seg_flags, sort_sections);
      break;
    }

  if (p == this->segment_list_.end())
    {
      Output_segment* oseg = this->make_output_segment(elfcpp::PT_LOAD,
                                                       seg_flags);
      if (os->is_large_data_section())
        oseg->set_is_large_data_segment();
      oseg->add_output_section(os, seg_flags, sort_sections);
    }

  // If we see a loadable SHT_NOTE section, we create a PT_NOTE
  // segment.
  if (os->type() == elfcpp::SHT_NOTE)
    {
      // See if we already have an equivalent PT_NOTE segment.
      for (p = this->segment_list_.begin();
           p != segment_list_.end();
           ++p)
        {
          if ((*p)->type() == elfcpp::PT_NOTE
              && (((*p)->flags() & elfcpp::PF_W)
                  == (seg_flags & elfcpp::PF_W)))
            {
              (*p)->add_output_section(os, seg_flags, false);
              break;
            }
        }

      if (p == this->segment_list_.end())
        {
          Output_segment* oseg = this->make_output_segment(elfcpp::PT_NOTE,
                                                           seg_flags);
          oseg->add_output_section(os, seg_flags, false);
        }
    }

  // If we see a loadable SHF_TLS section, we create a PT_TLS
  // segment.  There can only be one such segment.
  if ((flags & elfcpp::SHF_TLS) != 0)
    {
      if (this->tls_segment_ == NULL)
        this->make_output_segment(elfcpp::PT_TLS, seg_flags);
      this->tls_segment_->add_output_section(os, seg_flags, false);
    }

  // If -z relro is in effect, and we see a relro section, we create a
  // PT_GNU_RELRO segment.  There can only be one such segment.
  if (os->is_relro() && parameters->options().relro())
    {
      gold_assert(seg_flags == (elfcpp::PF_R | elfcpp::PF_W));
      if (this->relro_segment_ == NULL)
        this->make_output_segment(elfcpp::PT_GNU_RELRO, seg_flags);
      this->relro_segment_->add_output_section(os, seg_flags, false);
    }
}

// Make an output section for a script.

Output_section*
Layout::make_output_section_for_script(const char* name)
{
  name = this->namepool_.add(name, false, NULL);
  Output_section* os = this->make_output_section(name, elfcpp::SHT_PROGBITS,
                                                 elfcpp::SHF_ALLOC, false,
                                                 false, false, false, false);
  os->set_found_in_sections_clause();
  return os;
}

// Return the number of segments we expect to see.

size_t
Layout::expected_segment_count() const
{
  size_t ret = this->segment_list_.size();

  // If we didn't see a SECTIONS clause in a linker script, we should
  // already have the complete list of segments.  Otherwise we ask the
  // SECTIONS clause how many segments it expects, and add in the ones
  // we already have (PT_GNU_STACK, PT_GNU_EH_FRAME, etc.)

  if (!this->script_options_->saw_sections_clause())
    return ret;
  else
    {
      const Script_sections* ss = this->script_options_->script_sections();
      return ret + ss->expected_segment_count(this);
    }
}

// Handle the .note.GNU-stack section at layout time.  SEEN_GNU_STACK
// is whether we saw a .note.GNU-stack section in the object file.
// GNU_STACK_FLAGS is the section flags.  The flags give the
// protection required for stack memory.  We record this in an
// executable as a PT_GNU_STACK segment.  If an object file does not
// have a .note.GNU-stack segment, we must assume that it is an old
// object.  On some targets that will force an executable stack.

void
Layout::layout_gnu_stack(bool seen_gnu_stack, uint64_t gnu_stack_flags)
{
  if (!seen_gnu_stack)
    this->input_without_gnu_stack_note_ = true;
  else
    {
      this->input_with_gnu_stack_note_ = true;
      if ((gnu_stack_flags & elfcpp::SHF_EXECINSTR) != 0)
        this->input_requires_executable_stack_ = true;
    }
}

// Create automatic note sections.

void
Layout::create_notes()
{
  this->create_gold_note();
  this->create_executable_stack_info();
  this->create_build_id();
}

// Create the dynamic sections which are needed before we read the
// relocs.

void
Layout::create_initial_dynamic_sections(Symbol_table* symtab)
{
  if (parameters->doing_static_link())
    return;

  this->dynamic_section_ = this->choose_output_section(NULL, ".dynamic",
                                                       elfcpp::SHT_DYNAMIC,
                                                       (elfcpp::SHF_ALLOC
                                                        | elfcpp::SHF_WRITE),
                                                       false, false, true,
                                                       true, false, false);

  this->dynamic_symbol_ =
    symtab->define_in_output_data("_DYNAMIC", NULL, Symbol_table::PREDEFINED,
                                  this->dynamic_section_, 0, 0,
                                  elfcpp::STT_OBJECT, elfcpp::STB_LOCAL,
                                  elfcpp::STV_HIDDEN, 0, false, false);

  this->dynamic_data_ =  new Output_data_dynamic(&this->dynpool_);

  this->dynamic_section_->add_output_section_data(this->dynamic_data_);
}

// For each output section whose name can be represented as C symbol,
// define __start and __stop symbols for the section.  This is a GNU
// extension.

void
Layout::define_section_symbols(Symbol_table* symtab)
{
  for (Section_list::const_iterator p = this->section_list_.begin();
       p != this->section_list_.end();
       ++p)
    {
      const char* const name = (*p)->name();
      if (name[strspn(name,
                      ("0123456789"
                       "ABCDEFGHIJKLMNOPWRSTUVWXYZ"
                       "abcdefghijklmnopqrstuvwxyz"
                       "_"))]
          == '\0')
        {
          const std::string name_string(name);
          const std::string start_name("__start_" + name_string);
          const std::string stop_name("__stop_" + name_string);

          symtab->define_in_output_data(start_name.c_str(),
                                        NULL, // version
                                        Symbol_table::PREDEFINED,
                                        *p,
                                        0, // value
                                        0, // symsize
                                        elfcpp::STT_NOTYPE,
                                        elfcpp::STB_GLOBAL,
                                        elfcpp::STV_DEFAULT,
                                        0, // nonvis
                                        false, // offset_is_from_end
                                        true); // only_if_ref

          symtab->define_in_output_data(stop_name.c_str(),
                                        NULL, // version
                                        Symbol_table::PREDEFINED,
                                        *p,
                                        0, // value
                                        0, // symsize
                                        elfcpp::STT_NOTYPE,
                                        elfcpp::STB_GLOBAL,
                                        elfcpp::STV_DEFAULT,
                                        0, // nonvis
                                        true, // offset_is_from_end
                                        true); // only_if_ref
        }
    }
}

// Define symbols for group signatures.

void
Layout::define_group_signatures(Symbol_table* symtab)
{
  for (Group_signatures::iterator p = this->group_signatures_.begin();
       p != this->group_signatures_.end();
       ++p)
    {
      Symbol* sym = symtab->lookup(p->signature, NULL);
      if (sym != NULL)
        p->section->set_info_symndx(sym);
      else
        {
          // Force the name of the group section to the group
          // signature, and use the group's section symbol as the
          // signature symbol.
          if (strcmp(p->section->name(), p->signature) != 0)
            {
              const char* name = this->namepool_.add(p->signature,
                                                     true, NULL);
              p->section->set_name(name);
            }
          p->section->set_needs_symtab_index();
          p->section->set_info_section_symndx(p->section);
        }
    }

  this->group_signatures_.clear();
}

// Find the first read-only PT_LOAD segment, creating one if
// necessary.

Output_segment*
Layout::find_first_load_seg()
{
  for (Segment_list::const_iterator p = this->segment_list_.begin();
       p != this->segment_list_.end();
       ++p)
    {
      if ((*p)->type() == elfcpp::PT_LOAD
          && ((*p)->flags() & elfcpp::PF_R) != 0
          && (parameters->options().omagic()
              || ((*p)->flags() & elfcpp::PF_W) == 0))
        return *p;
    }

  gold_assert(!this->script_options_->saw_phdrs_clause());

  Output_segment* load_seg = this->make_output_segment(elfcpp::PT_LOAD,
                                                       elfcpp::PF_R);
  return load_seg;
}

// Save states of all current output segments.  Store saved states
// in SEGMENT_STATES.

void
Layout::save_segments(Segment_states* segment_states)
{
  for (Segment_list::const_iterator p = this->segment_list_.begin();
       p != this->segment_list_.end();
       ++p)
    {
      Output_segment* segment = *p;
      // Shallow copy.
      Output_segment* copy = new Output_segment(*segment);
      (*segment_states)[segment] = copy;
    }
}

// Restore states of output segments and delete any segment not found in
// SEGMENT_STATES.

void
Layout::restore_segments(const Segment_states* segment_states)
{
  // Go through the segment list and remove any segment added in the
  // relaxation loop.
  this->tls_segment_ = NULL;
  this->relro_segment_ = NULL;
  Segment_list::iterator list_iter = this->segment_list_.begin();
  while (list_iter != this->segment_list_.end())
    {
      Output_segment* segment = *list_iter;
      Segment_states::const_iterator states_iter =
          segment_states->find(segment);
      if (states_iter != segment_states->end())
        {
          const Output_segment* copy = states_iter->second;
          // Shallow copy to restore states.
          *segment = *copy;

          // Also fix up TLS and RELRO segment pointers as appropriate.
          if (segment->type() == elfcpp::PT_TLS)
            this->tls_segment_ = segment;
          else if (segment->type() == elfcpp::PT_GNU_RELRO)
            this->relro_segment_ = segment;

          ++list_iter;
        } 
      else
        {
          list_iter = this->segment_list_.erase(list_iter); 
          // This is a segment created during section layout.  It should be
          // safe to remove it since we should have removed all pointers to it.
          delete segment;
        }
    }
}

// Clean up after relaxation so that sections can be laid out again.

void
Layout::clean_up_after_relaxation()
{
  // Restore the segments to point state just prior to the relaxation loop.
  Script_sections* script_section = this->script_options_->script_sections();
  script_section->release_segments();
  this->restore_segments(this->segment_states_);

  // Reset section addresses and file offsets
  for (Section_list::iterator p = this->section_list_.begin();
       p != this->section_list_.end();
       ++p)
    {
      (*p)->reset_address_and_file_offset();
      (*p)->restore_states();
    }
  
  // Reset special output object address and file offsets.
  for (Data_list::iterator p = this->special_output_list_.begin();
       p != this->special_output_list_.end();
       ++p)
    (*p)->reset_address_and_file_offset();

  // A linker script may have created some output section data objects.
  // They are useless now.
  for (Output_section_data_list::const_iterator p =
         this->script_output_section_data_list_.begin();
       p != this->script_output_section_data_list_.end();
       ++p)
    delete *p;
  this->script_output_section_data_list_.clear(); 
}

// Prepare for relaxation.

void
Layout::prepare_for_relaxation()
{
  // Create an relaxation debug check if in debugging mode.
  if (is_debugging_enabled(DEBUG_RELAXATION))
    this->relaxation_debug_check_ = new Relaxation_debug_check();

  // Save segment states.
  this->segment_states_ = new Segment_states();
  this->save_segments(this->segment_states_);

  for(Section_list::const_iterator p = this->section_list_.begin();
      p != this->section_list_.end();
      ++p)
    (*p)->save_states();

  if (is_debugging_enabled(DEBUG_RELAXATION))
    this->relaxation_debug_check_->check_output_data_for_reset_values(
        this->section_list_, this->special_output_list_);

  // Also enable recording of output section data from scripts.
  this->record_output_section_data_from_script_ = true;
}

// Relaxation loop body:  If target has no relaxation, this runs only once
// Otherwise, the target relaxation hook is called at the end of
// each iteration.  If the hook returns true, it means re-layout of
// section is required.  
//
// The number of segments created by a linking script without a PHDRS
// clause may be affected by section sizes and alignments.  There is
// a remote chance that relaxation causes different number of PT_LOAD
// segments are created and sections are attached to different segments.
// Therefore, we always throw away all segments created during section
// layout.  In order to be able to restart the section layout, we keep
// a copy of the segment list right before the relaxation loop and use
// that to restore the segments.
// 
// PASS is the current relaxation pass number. 
// SYMTAB is a symbol table.
// PLOAD_SEG is the address of a pointer for the load segment.
// PHDR_SEG is a pointer to the PHDR segment.
// SEGMENT_HEADERS points to the output segment header.
// FILE_HEADER points to the output file header.
// PSHNDX is the address to store the output section index.

off_t inline
Layout::relaxation_loop_body(
    int pass,
    Target* target,
    Symbol_table* symtab,
    Output_segment** pload_seg,
    Output_segment* phdr_seg,
    Output_segment_headers* segment_headers,
    Output_file_header* file_header,
    unsigned int* pshndx)
{
  // If this is not the first iteration, we need to clean up after
  // relaxation so that we can lay out the sections again.
  if (pass != 0)
    this->clean_up_after_relaxation();

  // If there is a SECTIONS clause, put all the input sections into
  // the required order.
  Output_segment* load_seg;
  if (this->script_options_->saw_sections_clause())
    load_seg = this->set_section_addresses_from_script(symtab);
  else if (parameters->options().relocatable())
    load_seg = NULL;
  else
    load_seg = this->find_first_load_seg();

  if (parameters->options().oformat_enum()
      != General_options::OBJECT_FORMAT_ELF)
    load_seg = NULL;

  gold_assert(phdr_seg == NULL
              || load_seg != NULL
              || this->script_options_->saw_sections_clause());

  // Lay out the segment headers.
  if (!parameters->options().relocatable())
    {
      gold_assert(segment_headers != NULL);
      if (load_seg != NULL)
        load_seg->add_initial_output_data(segment_headers);
      if (phdr_seg != NULL)
        phdr_seg->add_initial_output_data(segment_headers);
    }

  // Lay out the file header.
  if (load_seg != NULL)
    load_seg->add_initial_output_data(file_header);

  if (this->script_options_->saw_phdrs_clause()
      && !parameters->options().relocatable())
    {
      // Support use of FILEHDRS and PHDRS attachments in a PHDRS
      // clause in a linker script.
      Script_sections* ss = this->script_options_->script_sections();
      ss->put_headers_in_phdrs(file_header, segment_headers);
    }

  // We set the output section indexes in set_segment_offsets and
  // set_section_indexes.
  *pshndx = 1;

  // Set the file offsets of all the segments, and all the sections
  // they contain.
  off_t off;
  if (!parameters->options().relocatable())
    off = this->set_segment_offsets(target, load_seg, pshndx);
  else
    off = this->set_relocatable_section_offsets(file_header, pshndx);

   // Verify that the dummy relaxation does not change anything.
  if (is_debugging_enabled(DEBUG_RELAXATION))
    {
      if (pass == 0)
        this->relaxation_debug_check_->read_sections(this->section_list_);
      else
        this->relaxation_debug_check_->verify_sections(this->section_list_);
    }

  *pload_seg = load_seg;
  return off;
}

// Finalize the layout.  When this is called, we have created all the
// output sections and all the output segments which are based on
// input sections.  We have several things to do, and we have to do
// them in the right order, so that we get the right results correctly
// and efficiently.

// 1) Finalize the list of output segments and create the segment
// table header.

// 2) Finalize the dynamic symbol table and associated sections.

// 3) Determine the final file offset of all the output segments.

// 4) Determine the final file offset of all the SHF_ALLOC output
// sections.

// 5) Create the symbol table sections and the section name table
// section.

// 6) Finalize the symbol table: set symbol values to their final
// value and make a final determination of which symbols are going
// into the output symbol table.

// 7) Create the section table header.

// 8) Determine the final file offset of all the output sections which
// are not SHF_ALLOC, including the section table header.

// 9) Finalize the ELF file header.

// This function returns the size of the output file.

off_t
Layout::finalize(const Input_objects* input_objects, Symbol_table* symtab,
                 Target* target, const Task* task)
{
  target->finalize_sections(this, input_objects, symtab);

  this->count_local_symbols(task, input_objects);

  this->link_stabs_sections();

  Output_segment* phdr_seg = NULL;
  if (!parameters->options().relocatable() && !parameters->doing_static_link())
    {
      // There was a dynamic object in the link.  We need to create
      // some information for the dynamic linker.

      // Create the PT_PHDR segment which will hold the program
      // headers.
      if (!this->script_options_->saw_phdrs_clause())
        phdr_seg = this->make_output_segment(elfcpp::PT_PHDR, elfcpp::PF_R);

      // Create the dynamic symbol table, including the hash table.
      Output_section* dynstr;
      std::vector<Symbol*> dynamic_symbols;
      unsigned int local_dynamic_count;
      Versions versions(*this->script_options()->version_script_info(),
                        &this->dynpool_);
      this->create_dynamic_symtab(input_objects, symtab, &dynstr,
                                  &local_dynamic_count, &dynamic_symbols,
                                  &versions);

      // Create the .interp section to hold the name of the
      // interpreter, and put it in a PT_INTERP segment.
      if (!parameters->options().shared())
        this->create_interp(target);

      // Finish the .dynamic section to hold the dynamic data, and put
      // it in a PT_DYNAMIC segment.
      this->finish_dynamic_section(input_objects, symtab);

      // We should have added everything we need to the dynamic string
      // table.
      this->dynpool_.set_string_offsets();

      // Create the version sections.  We can't do this until the
      // dynamic string table is complete.
      this->create_version_sections(&versions, symtab, local_dynamic_count,
                                    dynamic_symbols, dynstr);

      // Set the size of the _DYNAMIC symbol.  We can't do this until
      // after we call create_version_sections.
      this->set_dynamic_symbol_size(symtab);
    }
  
  if (this->incremental_inputs_)
    {
      this->incremental_inputs_->finalize();
      this->create_incremental_info_sections();
    }

  // Create segment headers.
  Output_segment_headers* segment_headers =
    (parameters->options().relocatable()
     ? NULL
     : new Output_segment_headers(this->segment_list_));

  // Lay out the file header.
  Output_file_header* file_header
    = new Output_file_header(target, symtab, segment_headers,
                             parameters->options().entry());

  this->special_output_list_.push_back(file_header);
  if (segment_headers != NULL)
    this->special_output_list_.push_back(segment_headers);

  // Find approriate places for orphan output sections if we are using
  // a linker script.
  if (this->script_options_->saw_sections_clause())
    this->place_orphan_sections_in_script();
  
  Output_segment* load_seg;
  off_t off;
  unsigned int shndx;
  int pass = 0;

  // Take a snapshot of the section layout as needed.
  if (target->may_relax())
    this->prepare_for_relaxation();
  
  // Run the relaxation loop to lay out sections.
  do
    {
      off = this->relaxation_loop_body(pass, target, symtab, &load_seg,
                                       phdr_seg, segment_headers, file_header,
                                       &shndx);
      pass++;
    }
  while (target->may_relax()
         && target->relax(pass, input_objects, symtab, this));

  // Set the file offsets of all the non-data sections we've seen so
  // far which don't have to wait for the input sections.  We need
  // this in order to finalize local symbols in non-allocated
  // sections.
  off = this->set_section_offsets(off, BEFORE_INPUT_SECTIONS_PASS);

  // Set the section indexes of all unallocated sections seen so far,
  // in case any of them are somehow referenced by a symbol.
  shndx = this->set_section_indexes(shndx);

  // Create the symbol table sections.
  this->create_symtab_sections(input_objects, symtab, shndx, &off);
  if (!parameters->doing_static_link())
    this->assign_local_dynsym_offsets(input_objects);

  // Process any symbol assignments from a linker script.  This must
  // be called after the symbol table has been finalized.
  this->script_options_->finalize_symbols(symtab, this);

  // Create the .shstrtab section.
  Output_section* shstrtab_section = this->create_shstrtab();

  // Set the file offsets of the rest of the non-data sections which
  // don't have to wait for the input sections.
  off = this->set_section_offsets(off, BEFORE_INPUT_SECTIONS_PASS);

  // Now that all sections have been created, set the section indexes
  // for any sections which haven't been done yet.
  shndx = this->set_section_indexes(shndx);

  // Create the section table header.
  this->create_shdrs(shstrtab_section, &off);

  // If there are no sections which require postprocessing, we can
  // handle the section names now, and avoid a resize later.
  if (!this->any_postprocessing_sections_)
    off = this->set_section_offsets(off,
                                    STRTAB_AFTER_POSTPROCESSING_SECTIONS_PASS);

  file_header->set_section_info(this->section_headers_, shstrtab_section);

  // Now we know exactly where everything goes in the output file
  // (except for non-allocated sections which require postprocessing).
  Output_data::layout_complete();

  this->output_file_size_ = off;

  return off;
}

// Create a note header following the format defined in the ELF ABI.
// NAME is the name, NOTE_TYPE is the type, SECTION_NAME is the name
// of the section to create, DESCSZ is the size of the descriptor.
// ALLOCATE is true if the section should be allocated in memory.
// This returns the new note section.  It sets *TRAILING_PADDING to
// the number of trailing zero bytes required.

Output_section*
Layout::create_note(const char* name, int note_type,
                    const char* section_name, size_t descsz,
                    bool allocate, size_t* trailing_padding)
{
  // Authorities all agree that the values in a .note field should
  // be aligned on 4-byte boundaries for 32-bit binaries.  However,
  // they differ on what the alignment is for 64-bit binaries.
  // The GABI says unambiguously they take 8-byte alignment:
  //    http://sco.com/developers/gabi/latest/ch5.pheader.html#note_section
  // Other documentation says alignment should always be 4 bytes:
  //    http://www.netbsd.org/docs/kernel/elf-notes.html#note-format
  // GNU ld and GNU readelf both support the latter (at least as of
  // version 2.16.91), and glibc always generates the latter for
  // .note.ABI-tag (as of version 1.6), so that's the one we go with
  // here.
#ifdef GABI_FORMAT_FOR_DOTNOTE_SECTION   // This is not defined by default.
  const int size = parameters->target().get_size();
#else
  const int size = 32;
#endif

  // The contents of the .note section.
  size_t namesz = strlen(name) + 1;
  size_t aligned_namesz = align_address(namesz, size / 8);
  size_t aligned_descsz = align_address(descsz, size / 8);

  size_t notehdrsz = 3 * (size / 8) + aligned_namesz;

  unsigned char* buffer = new unsigned char[notehdrsz];
  memset(buffer, 0, notehdrsz);

  bool is_big_endian = parameters->target().is_big_endian();

  if (size == 32)
    {
      if (!is_big_endian)
        {
          elfcpp::Swap<32, false>::writeval(buffer, namesz);
          elfcpp::Swap<32, false>::writeval(buffer + 4, descsz);
          elfcpp::Swap<32, false>::writeval(buffer + 8, note_type);
        }
      else
        {
          elfcpp::Swap<32, true>::writeval(buffer, namesz);
          elfcpp::Swap<32, true>::writeval(buffer + 4, descsz);
          elfcpp::Swap<32, true>::writeval(buffer + 8, note_type);
        }
    }
  else if (size == 64)
    {
      if (!is_big_endian)
        {
          elfcpp::Swap<64, false>::writeval(buffer, namesz);
          elfcpp::Swap<64, false>::writeval(buffer + 8, descsz);
          elfcpp::Swap<64, false>::writeval(buffer + 16, note_type);
        }
      else
        {
          elfcpp::Swap<64, true>::writeval(buffer, namesz);
          elfcpp::Swap<64, true>::writeval(buffer + 8, descsz);
          elfcpp::Swap<64, true>::writeval(buffer + 16, note_type);
        }
    }
  else
    gold_unreachable();

  memcpy(buffer + 3 * (size / 8), name, namesz);

  elfcpp::Elf_Xword flags = 0;
  if (allocate)
    flags = elfcpp::SHF_ALLOC;
  Output_section* os = this->choose_output_section(NULL, section_name,
                                                   elfcpp::SHT_NOTE,
                                                   flags, false, false,
                                                   false, false, false, false);
  if (os == NULL)
    return NULL;

  Output_section_data* posd = new Output_data_const_buffer(buffer, notehdrsz,
                                                           size / 8,
                                                           "** note header");
  os->add_output_section_data(posd);

  *trailing_padding = aligned_descsz - descsz;

  return os;
}

// For an executable or shared library, create a note to record the
// version of gold used to create the binary.

void
Layout::create_gold_note()
{
  if (parameters->options().relocatable())
    return;

  std::string desc = std::string("gold ") + gold::get_version_string();

  size_t trailing_padding;
  Output_section *os = this->create_note("GNU", elfcpp::NT_GNU_GOLD_VERSION,
                                         ".note.gnu.gold-version", desc.size(),
                                         false, &trailing_padding);
  if (os == NULL)
    return;

  Output_section_data* posd = new Output_data_const(desc, 4);
  os->add_output_section_data(posd);

  if (trailing_padding > 0)
    {
      posd = new Output_data_zero_fill(trailing_padding, 0);
      os->add_output_section_data(posd);
    }
}

// Record whether the stack should be executable.  This can be set
// from the command line using the -z execstack or -z noexecstack
// options.  Otherwise, if any input file has a .note.GNU-stack
// section with the SHF_EXECINSTR flag set, the stack should be
// executable.  Otherwise, if at least one input file a
// .note.GNU-stack section, and some input file has no .note.GNU-stack
// section, we use the target default for whether the stack should be
// executable.  Otherwise, we don't generate a stack note.  When
// generating a object file, we create a .note.GNU-stack section with
// the appropriate marking.  When generating an executable or shared
// library, we create a PT_GNU_STACK segment.

void
Layout::create_executable_stack_info()
{
  bool is_stack_executable;
  if (parameters->options().is_execstack_set())
    is_stack_executable = parameters->options().is_stack_executable();
  else if (!this->input_with_gnu_stack_note_)
    return;
  else
    {
      if (this->input_requires_executable_stack_)
        is_stack_executable = true;
      else if (this->input_without_gnu_stack_note_)
        is_stack_executable =
          parameters->target().is_default_stack_executable();
      else
        is_stack_executable = false;
    }

  if (parameters->options().relocatable())
    {
      const char* name = this->namepool_.add(".note.GNU-stack", false, NULL);
      elfcpp::Elf_Xword flags = 0;
      if (is_stack_executable)
        flags |= elfcpp::SHF_EXECINSTR;
      this->make_output_section(name, elfcpp::SHT_PROGBITS, flags, false,
                                false, false, false, false);
    }
  else
    {
      if (this->script_options_->saw_phdrs_clause())
        return;
      int flags = elfcpp::PF_R | elfcpp::PF_W;
      if (is_stack_executable)
        flags |= elfcpp::PF_X;
      this->make_output_segment(elfcpp::PT_GNU_STACK, flags);
    }
}

// If --build-id was used, set up the build ID note.

void
Layout::create_build_id()
{
  if (!parameters->options().user_set_build_id())
    return;

  const char* style = parameters->options().build_id();
  if (strcmp(style, "none") == 0)
    return;

  // Set DESCSZ to the size of the note descriptor.  When possible,
  // set DESC to the note descriptor contents.
  size_t descsz;
  std::string desc;
  if (strcmp(style, "md5") == 0)
    descsz = 128 / 8;
  else if (strcmp(style, "sha1") == 0)
    descsz = 160 / 8;
  else if (strcmp(style, "uuid") == 0)
    {
      const size_t uuidsz = 128 / 8;

      char buffer[uuidsz];
      memset(buffer, 0, uuidsz);

      int descriptor = open_descriptor(-1, "/dev/urandom", O_RDONLY);
      if (descriptor < 0)
        gold_error(_("--build-id=uuid failed: could not open /dev/urandom: %s"),
                   strerror(errno));
      else
        {
          ssize_t got = ::read(descriptor, buffer, uuidsz);
          release_descriptor(descriptor, true);
          if (got < 0)
            gold_error(_("/dev/urandom: read failed: %s"), strerror(errno));
          else if (static_cast<size_t>(got) != uuidsz)
            gold_error(_("/dev/urandom: expected %zu bytes, got %zd bytes"),
                       uuidsz, got);
        }

      desc.assign(buffer, uuidsz);
      descsz = uuidsz;
    }
  else if (strncmp(style, "0x", 2) == 0)
    {
      hex_init();
      const char* p = style + 2;
      while (*p != '\0')
        {
          if (hex_p(p[0]) && hex_p(p[1]))
            {
              char c = (hex_value(p[0]) << 4) | hex_value(p[1]);
              desc += c;
              p += 2;
            }
          else if (*p == '-' || *p == ':')
            ++p;
          else
            gold_fatal(_("--build-id argument '%s' not a valid hex number"),
                       style);
        }
      descsz = desc.size();
    }
  else
    gold_fatal(_("unrecognized --build-id argument '%s'"), style);

  // Create the note.
  size_t trailing_padding;
  Output_section* os = this->create_note("GNU", elfcpp::NT_GNU_BUILD_ID,
                                         ".note.gnu.build-id", descsz, true,
                                         &trailing_padding);
  if (os == NULL)
    return;

  if (!desc.empty())
    {
      // We know the value already, so we fill it in now.
      gold_assert(desc.size() == descsz);

      Output_section_data* posd = new Output_data_const(desc, 4);
      os->add_output_section_data(posd);

      if (trailing_padding != 0)
        {
          posd = new Output_data_zero_fill(trailing_padding, 0);
          os->add_output_section_data(posd);
        }
    }
  else
    {
      // We need to compute a checksum after we have completed the
      // link.
      gold_assert(trailing_padding == 0);
      this->build_id_note_ = new Output_data_zero_fill(descsz, 4);
      os->add_output_section_data(this->build_id_note_);
    }
}

// If we have both .stabXX and .stabXXstr sections, then the sh_link
// field of the former should point to the latter.  I'm not sure who
// started this, but the GNU linker does it, and some tools depend
// upon it.

void
Layout::link_stabs_sections()
{
  if (!this->have_stabstr_section_)
    return;

  for (Section_list::iterator p = this->section_list_.begin();
       p != this->section_list_.end();
       ++p)
    {
      if ((*p)->type() != elfcpp::SHT_STRTAB)
        continue;

      const char* name = (*p)->name();
      if (strncmp(name, ".stab", 5) != 0)
        continue;

      size_t len = strlen(name);
      if (strcmp(name + len - 3, "str") != 0)
        continue;

      std::string stab_name(name, len - 3);
      Output_section* stab_sec;
      stab_sec = this->find_output_section(stab_name.c_str());
      if (stab_sec != NULL)
        stab_sec->set_link_section(*p);
    }
}

// Create .gnu_incremental_inputs and .gnu_incremental_strtab sections needed
// for the next run of incremental linking to check what has changed.

void
Layout::create_incremental_info_sections()
{
  gold_assert(this->incremental_inputs_ != NULL);

  // Add the .gnu_incremental_inputs section.
  const char *incremental_inputs_name =
    this->namepool_.add(".gnu_incremental_inputs", false, NULL);
  Output_section* inputs_os =
    this->make_output_section(incremental_inputs_name,
                              elfcpp::SHT_GNU_INCREMENTAL_INPUTS, 0,
                              false, false, false, false, false);
  Output_section_data* posd =
      this->incremental_inputs_->create_incremental_inputs_section_data();
  inputs_os->add_output_section_data(posd);
  
  // Add the .gnu_incremental_strtab section.
  const char *incremental_strtab_name =
    this->namepool_.add(".gnu_incremental_strtab", false, NULL);
  Output_section* strtab_os = this->make_output_section(incremental_strtab_name,
                                                        elfcpp::SHT_STRTAB,
                                                        0, false, false,
                                                        false, false, false);
  Output_data_strtab* strtab_data =
    new Output_data_strtab(this->incremental_inputs_->get_stringpool());
  strtab_os->add_output_section_data(strtab_data);
  
  inputs_os->set_link_section(strtab_data);
}

// Return whether SEG1 should be before SEG2 in the output file.  This
// is based entirely on the segment type and flags.  When this is
// called the segment addresses has normally not yet been set.

bool
Layout::segment_precedes(const Output_segment* seg1,
                         const Output_segment* seg2)
{
  elfcpp::Elf_Word type1 = seg1->type();
  elfcpp::Elf_Word type2 = seg2->type();

  // The single PT_PHDR segment is required to precede any loadable
  // segment.  We simply make it always first.
  if (type1 == elfcpp::PT_PHDR)
    {
      gold_assert(type2 != elfcpp::PT_PHDR);
      return true;
    }
  if (type2 == elfcpp::PT_PHDR)
    return false;

  // The single PT_INTERP segment is required to precede any loadable
  // segment.  We simply make it always second.
  if (type1 == elfcpp::PT_INTERP)
    {
      gold_assert(type2 != elfcpp::PT_INTERP);
      return true;
    }
  if (type2 == elfcpp::PT_INTERP)
    return false;

  // We then put PT_LOAD segments before any other segments.
  if (type1 == elfcpp::PT_LOAD && type2 != elfcpp::PT_LOAD)
    return true;
  if (type2 == elfcpp::PT_LOAD && type1 != elfcpp::PT_LOAD)
    return false;

  // We put the PT_TLS segment last except for the PT_GNU_RELRO
  // segment, because that is where the dynamic linker expects to find
  // it (this is just for efficiency; other positions would also work
  // correctly).
  if (type1 == elfcpp::PT_TLS
      && type2 != elfcpp::PT_TLS
      && type2 != elfcpp::PT_GNU_RELRO)
    return false;
  if (type2 == elfcpp::PT_TLS
      && type1 != elfcpp::PT_TLS
      && type1 != elfcpp::PT_GNU_RELRO)
    return true;

  // We put the PT_GNU_RELRO segment last, because that is where the
  // dynamic linker expects to find it (as with PT_TLS, this is just
  // for efficiency).
  if (type1 == elfcpp::PT_GNU_RELRO && type2 != elfcpp::PT_GNU_RELRO)
    return false;
  if (type2 == elfcpp::PT_GNU_RELRO && type1 != elfcpp::PT_GNU_RELRO)
    return true;

  const elfcpp::Elf_Word flags1 = seg1->flags();
  const elfcpp::Elf_Word flags2 = seg2->flags();

  // The order of non-PT_LOAD segments is unimportant.  We simply sort
  // by the numeric segment type and flags values.  There should not
  // be more than one segment with the same type and flags.
  if (type1 != elfcpp::PT_LOAD)
    {
      if (type1 != type2)
        return type1 < type2;
      gold_assert(flags1 != flags2);
      return flags1 < flags2;
    }

  // If the addresses are set already, sort by load address.
  if (seg1->are_addresses_set())
    {
      if (!seg2->are_addresses_set())
        return true;

      unsigned int section_count1 = seg1->output_section_count();
      unsigned int section_count2 = seg2->output_section_count();
      if (section_count1 == 0 && section_count2 > 0)
        return true;
      if (section_count1 > 0 && section_count2 == 0)
        return false;

      uint64_t paddr1 = seg1->first_section_load_address();
      uint64_t paddr2 = seg2->first_section_load_address();
      if (paddr1 != paddr2)
        return paddr1 < paddr2;
    }
  else if (seg2->are_addresses_set())
    return false;

  // A segment which holds large data comes after a segment which does
  // not hold large data.
  if (seg1->is_large_data_segment())
    {
      if (!seg2->is_large_data_segment())
        return false;
    }
  else if (seg2->is_large_data_segment())
    return true;

  // Otherwise, we sort PT_LOAD segments based on the flags.  Readonly
  // segments come before writable segments.  Then writable segments
  // with data come before writable segments without data.  Then
  // executable segments come before non-executable segments.  Then
  // the unlikely case of a non-readable segment comes before the
  // normal case of a readable segment.  If there are multiple
  // segments with the same type and flags, we require that the
  // address be set, and we sort by virtual address and then physical
  // address.
  if ((flags1 & elfcpp::PF_W) != (flags2 & elfcpp::PF_W))
    return (flags1 & elfcpp::PF_W) == 0;
  if ((flags1 & elfcpp::PF_W) != 0
      && seg1->has_any_data_sections() != seg2->has_any_data_sections())
    return seg1->has_any_data_sections();
  if ((flags1 & elfcpp::PF_X) != (flags2 & elfcpp::PF_X))
    return (flags1 & elfcpp::PF_X) != 0;
  if ((flags1 & elfcpp::PF_R) != (flags2 & elfcpp::PF_R))
    return (flags1 & elfcpp::PF_R) == 0;

  // We shouldn't get here--we shouldn't create segments which we
  // can't distinguish.
  gold_unreachable();
}

// Increase OFF so that it is congruent to ADDR modulo ABI_PAGESIZE.

static off_t
align_file_offset(off_t off, uint64_t addr, uint64_t abi_pagesize)
{
  uint64_t unsigned_off = off;
  uint64_t aligned_off = ((unsigned_off & ~(abi_pagesize - 1))
                          | (addr & (abi_pagesize - 1)));
  if (aligned_off < unsigned_off)
    aligned_off += abi_pagesize;
  return aligned_off;
}

// Set the file offsets of all the segments, and all the sections they
// contain.  They have all been created.  LOAD_SEG must be be laid out
// first.  Return the offset of the data to follow.

off_t
Layout::set_segment_offsets(const Target* target, Output_segment* load_seg,
                            unsigned int *pshndx)
{
  // Sort them into the final order.
  std::sort(this->segment_list_.begin(), this->segment_list_.end(),
            Layout::Compare_segments());

  // Find the PT_LOAD segments, and set their addresses and offsets
  // and their section's addresses and offsets.
  uint64_t addr;
  if (parameters->options().user_set_Ttext())
    addr = parameters->options().Ttext();
  else if (parameters->options().output_is_position_independent())
    addr = 0;
  else
    addr = target->default_text_segment_address();
  off_t off = 0;

  // If LOAD_SEG is NULL, then the file header and segment headers
  // will not be loadable.  But they still need to be at offset 0 in
  // the file.  Set their offsets now.
  if (load_seg == NULL)
    {
      for (Data_list::iterator p = this->special_output_list_.begin();
           p != this->special_output_list_.end();
           ++p)
        {
          off = align_address(off, (*p)->addralign());
          (*p)->set_address_and_file_offset(0, off);
          off += (*p)->data_size();
        }
    }

  unsigned int increase_relro = this->increase_relro_;
  if (this->script_options_->saw_sections_clause())
    increase_relro = 0;

  const bool check_sections = parameters->options().check_sections();
  Output_segment* last_load_segment = NULL;

  bool was_readonly = false;
  for (Segment_list::iterator p = this->segment_list_.begin();
       p != this->segment_list_.end();
       ++p)
    {
      if ((*p)->type() == elfcpp::PT_LOAD)
        {
          if (load_seg != NULL && load_seg != *p)
            gold_unreachable();
          load_seg = NULL;

          bool are_addresses_set = (*p)->are_addresses_set();
          if (are_addresses_set)
            {
              // When it comes to setting file offsets, we care about
              // the physical address.
              addr = (*p)->paddr();
            }
          else if (parameters->options().user_set_Tdata()
                   && ((*p)->flags() & elfcpp::PF_W) != 0
                   && (!parameters->options().user_set_Tbss()
                       || (*p)->has_any_data_sections()))
            {
              addr = parameters->options().Tdata();
              are_addresses_set = true;
            }
          else if (parameters->options().user_set_Tbss()
                   && ((*p)->flags() & elfcpp::PF_W) != 0
                   && !(*p)->has_any_data_sections())
            {
              addr = parameters->options().Tbss();
              are_addresses_set = true;
            }

          uint64_t orig_addr = addr;
          uint64_t orig_off = off;

          uint64_t aligned_addr = 0;
          uint64_t abi_pagesize = target->abi_pagesize();
          uint64_t common_pagesize = target->common_pagesize();

          if (!parameters->options().nmagic()
              && !parameters->options().omagic())
            (*p)->set_minimum_p_align(common_pagesize);

          if (!are_addresses_set)
            {
              // If the last segment was readonly, and this one is
              // not, then skip the address forward one page,
              // maintaining the same position within the page.  This
              // lets us store both segments overlapping on a single
              // page in the file, but the loader will put them on
              // different pages in memory.

              addr = align_address(addr, (*p)->maximum_alignment());
              aligned_addr = addr;

              if (was_readonly && ((*p)->flags() & elfcpp::PF_W) != 0)
                {
                  if ((addr & (abi_pagesize - 1)) != 0)
                    addr = addr + abi_pagesize;
                }

              off = orig_off + ((addr - orig_addr) & (abi_pagesize - 1));
            }

          if (!parameters->options().nmagic()
              && !parameters->options().omagic())
            off = align_file_offset(off, addr, abi_pagesize);
          else if (load_seg == NULL)
            {
              // This is -N or -n with a section script which prevents
              // us from using a load segment.  We need to ensure that
              // the file offset is aligned to the alignment of the
              // segment.  This is because the linker script
              // implicitly assumed a zero offset.  If we don't align
              // here, then the alignment of the sections in the
              // linker script may not match the alignment of the
              // sections in the set_section_addresses call below,
              // causing an error about dot moving backward.
              off = align_address(off, (*p)->maximum_alignment());
            }

          unsigned int shndx_hold = *pshndx;
          uint64_t new_addr = (*p)->set_section_addresses(this, false, addr,
                                                          increase_relro,
                                                          &off, pshndx);

          // Now that we know the size of this segment, we may be able
          // to save a page in memory, at the cost of wasting some
          // file space, by instead aligning to the start of a new
          // page.  Here we use the real machine page size rather than
          // the ABI mandated page size.

          if (!are_addresses_set && aligned_addr != addr)
            {
              uint64_t first_off = (common_pagesize
                                    - (aligned_addr
                                       & (common_pagesize - 1)));
              uint64_t last_off = new_addr & (common_pagesize - 1);
              if (first_off > 0
                  && last_off > 0
                  && ((aligned_addr & ~ (common_pagesize - 1))
                      != (new_addr & ~ (common_pagesize - 1)))
                  && first_off + last_off <= common_pagesize)
                {
                  *pshndx = shndx_hold;
                  addr = align_address(aligned_addr, common_pagesize);
                  addr = align_address(addr, (*p)->maximum_alignment());
                  off = orig_off + ((addr - orig_addr) & (abi_pagesize - 1));
                  off = align_file_offset(off, addr, abi_pagesize);
                  new_addr = (*p)->set_section_addresses(this, true, addr,
                                                         increase_relro,
                                                         &off, pshndx);
                }
            }

          addr = new_addr;

          if (((*p)->flags() & elfcpp::PF_W) == 0)
            was_readonly = true;

          // Implement --check-sections.  We know that the segments
          // are sorted by LMA.
          if (check_sections && last_load_segment != NULL)
            {
              gold_assert(last_load_segment->paddr() <= (*p)->paddr());
              if (last_load_segment->paddr() + last_load_segment->memsz()
                  > (*p)->paddr())
                {
                  unsigned long long lb1 = last_load_segment->paddr();
                  unsigned long long le1 = lb1 + last_load_segment->memsz();
                  unsigned long long lb2 = (*p)->paddr();
                  unsigned long long le2 = lb2 + (*p)->memsz();
                  gold_error(_("load segment overlap [0x%llx -> 0x%llx] and "
                               "[0x%llx -> 0x%llx]"),
                             lb1, le1, lb2, le2);
                }
            }
          last_load_segment = *p;
        }
    }

  // Handle the non-PT_LOAD segments, setting their offsets from their
  // section's offsets.
  for (Segment_list::iterator p = this->segment_list_.begin();
       p != this->segment_list_.end();
       ++p)
    {
      if ((*p)->type() != elfcpp::PT_LOAD)
        (*p)->set_offset((*p)->type() == elfcpp::PT_GNU_RELRO
                         ? increase_relro
                         : 0);
    }

  // Set the TLS offsets for each section in the PT_TLS segment.
  if (this->tls_segment_ != NULL)
    this->tls_segment_->set_tls_offsets();

  return off;
}

// Set the offsets of all the allocated sections when doing a
// relocatable link.  This does the same jobs as set_segment_offsets,
// only for a relocatable link.

off_t
Layout::set_relocatable_section_offsets(Output_data* file_header,
                                        unsigned int *pshndx)
{
  off_t off = 0;

  file_header->set_address_and_file_offset(0, 0);
  off += file_header->data_size();

  for (Section_list::iterator p = this->section_list_.begin();
       p != this->section_list_.end();
       ++p)
    {
      // We skip unallocated sections here, except that group sections
      // have to come first.
      if (((*p)->flags() & elfcpp::SHF_ALLOC) == 0
          && (*p)->type() != elfcpp::SHT_GROUP)
        continue;

      off = align_address(off, (*p)->addralign());

      // The linker script might have set the address.
      if (!(*p)->is_address_valid())
        (*p)->set_address(0);
      (*p)->set_file_offset(off);
      (*p)->finalize_data_size();
      off += (*p)->data_size();

      (*p)->set_out_shndx(*pshndx);
      ++*pshndx;
    }

  return off;
}

// Set the file offset of all the sections not associated with a
// segment.

off_t
Layout::set_section_offsets(off_t off, Layout::Section_offset_pass pass)
{
  for (Section_list::iterator p = this->unattached_section_list_.begin();
       p != this->unattached_section_list_.end();
       ++p)
    {
      // The symtab section is handled in create_symtab_sections.
      if (*p == this->symtab_section_)
        continue;

      // If we've already set the data size, don't set it again.
      if ((*p)->is_offset_valid() && (*p)->is_data_size_valid())
        continue;

      if (pass == BEFORE_INPUT_SECTIONS_PASS
          && (*p)->requires_postprocessing())
        {
          (*p)->create_postprocessing_buffer();
          this->any_postprocessing_sections_ = true;
        }

      if (pass == BEFORE_INPUT_SECTIONS_PASS
          && (*p)->after_input_sections())
        continue;
      else if (pass == POSTPROCESSING_SECTIONS_PASS
               && (!(*p)->after_input_sections()
                   || (*p)->type() == elfcpp::SHT_STRTAB))
        continue;
      else if (pass == STRTAB_AFTER_POSTPROCESSING_SECTIONS_PASS
               && (!(*p)->after_input_sections()
                   || (*p)->type() != elfcpp::SHT_STRTAB))
        continue;

      off = align_address(off, (*p)->addralign());
      (*p)->set_file_offset(off);
      (*p)->finalize_data_size();
      off += (*p)->data_size();

      // At this point the name must be set.
      if (pass != STRTAB_AFTER_POSTPROCESSING_SECTIONS_PASS)
        this->namepool_.add((*p)->name(), false, NULL);
    }
  return off;
}

// Set the section indexes of all the sections not associated with a
// segment.

unsigned int
Layout::set_section_indexes(unsigned int shndx)
{
  for (Section_list::iterator p = this->unattached_section_list_.begin();
       p != this->unattached_section_list_.end();
       ++p)
    {
      if (!(*p)->has_out_shndx())
        {
          (*p)->set_out_shndx(shndx);
          ++shndx;
        }
    }
  return shndx;
}

// Set the section addresses according to the linker script.  This is
// only called when we see a SECTIONS clause.  This returns the
// program segment which should hold the file header and segment
// headers, if any.  It will return NULL if they should not be in a
// segment.

Output_segment*
Layout::set_section_addresses_from_script(Symbol_table* symtab)
{
  Script_sections* ss = this->script_options_->script_sections();
  gold_assert(ss->saw_sections_clause());
  return this->script_options_->set_section_addresses(symtab, this);
}

// Place the orphan sections in the linker script.

void
Layout::place_orphan_sections_in_script()
{
  Script_sections* ss = this->script_options_->script_sections();
  gold_assert(ss->saw_sections_clause());

  // Place each orphaned output section in the script.
  for (Section_list::iterator p = this->section_list_.begin();
       p != this->section_list_.end();
       ++p)
    {
      if (!(*p)->found_in_sections_clause())
        ss->place_orphan(*p);
    }
}

// Count the local symbols in the regular symbol table and the dynamic
// symbol table, and build the respective string pools.

void
Layout::count_local_symbols(const Task* task,
                            const Input_objects* input_objects)
{
  // First, figure out an upper bound on the number of symbols we'll
  // be inserting into each pool.  This helps us create the pools with
  // the right size, to avoid unnecessary hashtable resizing.
  unsigned int symbol_count = 0;
  for (Input_objects::Relobj_iterator p = input_objects->relobj_begin();
       p != input_objects->relobj_end();
       ++p)
    symbol_count += (*p)->local_symbol_count();

  // Go from "upper bound" to "estimate."  We overcount for two
  // reasons: we double-count symbols that occur in more than one
  // object file, and we count symbols that are dropped from the
  // output.  Add it all together and assume we overcount by 100%.
  symbol_count /= 2;

  // We assume all symbols will go into both the sympool and dynpool.
  this->sympool_.reserve(symbol_count);
  this->dynpool_.reserve(symbol_count);

  for (Input_objects::Relobj_iterator p = input_objects->relobj_begin();
       p != input_objects->relobj_end();
       ++p)
    {
      Task_lock_obj<Object> tlo(task, *p);
      (*p)->count_local_symbols(&this->sympool_, &this->dynpool_);
    }
}

// Create the symbol table sections.  Here we also set the final
// values of the symbols.  At this point all the loadable sections are
// fully laid out.  SHNUM is the number of sections so far.

void
Layout::create_symtab_sections(const Input_objects* input_objects,
                               Symbol_table* symtab,
                               unsigned int shnum,
                               off_t* poff)
{
  int symsize;
  unsigned int align;
  if (parameters->target().get_size() == 32)
    {
      symsize = elfcpp::Elf_sizes<32>::sym_size;
      align = 4;
    }
  else if (parameters->target().get_size() == 64)
    {
      symsize = elfcpp::Elf_sizes<64>::sym_size;
      align = 8;
    }
  else
    gold_unreachable();

  off_t off = *poff;
  off = align_address(off, align);
  off_t startoff = off;

  // Save space for the dummy symbol at the start of the section.  We
  // never bother to write this out--it will just be left as zero.
  off += symsize;
  unsigned int local_symbol_index = 1;

  // Add STT_SECTION symbols for each Output section which needs one.
  for (Section_list::iterator p = this->section_list_.begin();
       p != this->section_list_.end();
       ++p)
    {
      if (!(*p)->needs_symtab_index())
        (*p)->set_symtab_index(-1U);
      else
        {
          (*p)->set_symtab_index(local_symbol_index);
          ++local_symbol_index;
          off += symsize;
        }
    }

  for (Input_objects::Relobj_iterator p = input_objects->relobj_begin();
       p != input_objects->relobj_end();
       ++p)
    {
      unsigned int index = (*p)->finalize_local_symbols(local_symbol_index,
                                                        off, symtab);
      off += (index - local_symbol_index) * symsize;
      local_symbol_index = index;
    }

  unsigned int local_symcount = local_symbol_index;
  gold_assert(static_cast<off_t>(local_symcount * symsize) == off - startoff);

  off_t dynoff;
  size_t dyn_global_index;
  size_t dyncount;
  if (this->dynsym_section_ == NULL)
    {
      dynoff = 0;
      dyn_global_index = 0;
      dyncount = 0;
    }
  else
    {
      dyn_global_index = this->dynsym_section_->info();
      off_t locsize = dyn_global_index * this->dynsym_section_->entsize();
      dynoff = this->dynsym_section_->offset() + locsize;
      dyncount = (this->dynsym_section_->data_size() - locsize) / symsize;
      gold_assert(static_cast<off_t>(dyncount * symsize)
                  == this->dynsym_section_->data_size() - locsize);
    }

  off = symtab->finalize(off, dynoff, dyn_global_index, dyncount,
                         &this->sympool_, &local_symcount);

  if (!parameters->options().strip_all())
    {
      this->sympool_.set_string_offsets();

      const char* symtab_name = this->namepool_.add(".symtab", false, NULL);
      Output_section* osymtab = this->make_output_section(symtab_name,
                                                          elfcpp::SHT_SYMTAB,
                                                          0, false, false,
                                                          false, false, false);
      this->symtab_section_ = osymtab;

      Output_section_data* pos = new Output_data_fixed_space(off - startoff,
                                                             align,
                                                             "** symtab");
      osymtab->add_output_section_data(pos);

      // We generate a .symtab_shndx section if we have more than
      // SHN_LORESERVE sections.  Technically it is possible that we
      // don't need one, because it is possible that there are no
      // symbols in any of sections with indexes larger than
      // SHN_LORESERVE.  That is probably unusual, though, and it is
      // easier to always create one than to compute section indexes
      // twice (once here, once when writing out the symbols).
      if (shnum >= elfcpp::SHN_LORESERVE)
        {
          const char* symtab_xindex_name = this->namepool_.add(".symtab_shndx",
                                                               false, NULL);
          Output_section* osymtab_xindex =
            this->make_output_section(symtab_xindex_name,
                                      elfcpp::SHT_SYMTAB_SHNDX, 0, false,
                                      false, false, false, false);

          size_t symcount = (off - startoff) / symsize;
          this->symtab_xindex_ = new Output_symtab_xindex(symcount);

          osymtab_xindex->add_output_section_data(this->symtab_xindex_);

          osymtab_xindex->set_link_section(osymtab);
          osymtab_xindex->set_addralign(4);
          osymtab_xindex->set_entsize(4);

          osymtab_xindex->set_after_input_sections();

          // This tells the driver code to wait until the symbol table
          // has written out before writing out the postprocessing
          // sections, including the .symtab_shndx section.
          this->any_postprocessing_sections_ = true;
        }

      const char* strtab_name = this->namepool_.add(".strtab", false, NULL);
      Output_section* ostrtab = this->make_output_section(strtab_name,
                                                          elfcpp::SHT_STRTAB,
                                                          0, false, false,
                                                          false, false, false);

      Output_section_data* pstr = new Output_data_strtab(&this->sympool_);
      ostrtab->add_output_section_data(pstr);

      osymtab->set_file_offset(startoff);
      osymtab->finalize_data_size();
      osymtab->set_link_section(ostrtab);
      osymtab->set_info(local_symcount);
      osymtab->set_entsize(symsize);

      *poff = off;
    }
}

// Create the .shstrtab section, which holds the names of the
// sections.  At the time this is called, we have created all the
// output sections except .shstrtab itself.

Output_section*
Layout::create_shstrtab()
{
  // FIXME: We don't need to create a .shstrtab section if we are
  // stripping everything.

  const char* name = this->namepool_.add(".shstrtab", false, NULL);

  Output_section* os = this->make_output_section(name, elfcpp::SHT_STRTAB, 0,
                                                 false, false, false, false,
                                                 false);

  if (strcmp(parameters->options().compress_debug_sections(), "none") != 0)
    {
      // We can't write out this section until we've set all the
      // section names, and we don't set the names of compressed
      // output sections until relocations are complete.  FIXME: With
      // the current names we use, this is unnecessary.
      os->set_after_input_sections();
    }

  Output_section_data* posd = new Output_data_strtab(&this->namepool_);
  os->add_output_section_data(posd);

  return os;
}

// Create the section headers.  SIZE is 32 or 64.  OFF is the file
// offset.

void
Layout::create_shdrs(const Output_section* shstrtab_section, off_t* poff)
{
  Output_section_headers* oshdrs;
  oshdrs = new Output_section_headers(this,
                                      &this->segment_list_,
                                      &this->section_list_,
                                      &this->unattached_section_list_,
                                      &this->namepool_,
                                      shstrtab_section);
  off_t off = align_address(*poff, oshdrs->addralign());
  oshdrs->set_address_and_file_offset(0, off);
  off += oshdrs->data_size();
  *poff = off;
  this->section_headers_ = oshdrs;
}

// Count the allocated sections.

size_t
Layout::allocated_output_section_count() const
{
  size_t section_count = 0;
  for (Segment_list::const_iterator p = this->segment_list_.begin();
       p != this->segment_list_.end();
       ++p)
    section_count += (*p)->output_section_count();
  return section_count;
}

// Create the dynamic symbol table.

void
Layout::create_dynamic_symtab(const Input_objects* input_objects,
                              Symbol_table* symtab,
                              Output_section **pdynstr,
                              unsigned int* plocal_dynamic_count,
                              std::vector<Symbol*>* pdynamic_symbols,
                              Versions* pversions)
{
  // Count all the symbols in the dynamic symbol table, and set the
  // dynamic symbol indexes.

  // Skip symbol 0, which is always all zeroes.
  unsigned int index = 1;

  // Add STT_SECTION symbols for each Output section which needs one.
  for (Section_list::iterator p = this->section_list_.begin();
       p != this->section_list_.end();
       ++p)
    {
      if (!(*p)->needs_dynsym_index())
        (*p)->set_dynsym_index(-1U);
      else
        {
          (*p)->set_dynsym_index(index);
          ++index;
        }
    }

  // Count the local symbols that need to go in the dynamic symbol table,
  // and set the dynamic symbol indexes.
  for (Input_objects::Relobj_iterator p = input_objects->relobj_begin();
       p != input_objects->relobj_end();
       ++p)
    {
      unsigned int new_index = (*p)->set_local_dynsym_indexes(index);
      index = new_index;
    }

  unsigned int local_symcount = index;
  *plocal_dynamic_count = local_symcount;

  index = symtab->set_dynsym_indexes(index, pdynamic_symbols,
                                     &this->dynpool_, pversions);

  int symsize;
  unsigned int align;
  const int size = parameters->target().get_size();
  if (size == 32)
    {
      symsize = elfcpp::Elf_sizes<32>::sym_size;
      align = 4;
    }
  else if (size == 64)
    {
      symsize = elfcpp::Elf_sizes<64>::sym_size;
      align = 8;
    }
  else
    gold_unreachable();

  // Create the dynamic symbol table section.

  Output_section* dynsym = this->choose_output_section(NULL, ".dynsym",
                                                       elfcpp::SHT_DYNSYM,
                                                       elfcpp::SHF_ALLOC,
                                                       false, false, true,
                                                       false, false, false);

  Output_section_data* odata = new Output_data_fixed_space(index * symsize,
                                                           align,
                                                           "** dynsym");
  dynsym->add_output_section_data(odata);

  dynsym->set_info(local_symcount);
  dynsym->set_entsize(symsize);
  dynsym->set_addralign(align);

  this->dynsym_section_ = dynsym;

  Output_data_dynamic* const odyn = this->dynamic_data_;
  odyn->add_section_address(elfcpp::DT_SYMTAB, dynsym);
  odyn->add_constant(elfcpp::DT_SYMENT, symsize);

  // If there are more than SHN_LORESERVE allocated sections, we
  // create a .dynsym_shndx section.  It is possible that we don't
  // need one, because it is possible that there are no dynamic
  // symbols in any of the sections with indexes larger than
  // SHN_LORESERVE.  This is probably unusual, though, and at this
  // time we don't know the actual section indexes so it is
  // inconvenient to check.
  if (this->allocated_output_section_count() >= elfcpp::SHN_LORESERVE)
    {
      Output_section* dynsym_xindex =
        this->choose_output_section(NULL, ".dynsym_shndx",
                                    elfcpp::SHT_SYMTAB_SHNDX,
                                    elfcpp::SHF_ALLOC,
                                    false, false, true, false, false, false);

      this->dynsym_xindex_ = new Output_symtab_xindex(index);

      dynsym_xindex->add_output_section_data(this->dynsym_xindex_);

      dynsym_xindex->set_link_section(dynsym);
      dynsym_xindex->set_addralign(4);
      dynsym_xindex->set_entsize(4);

      dynsym_xindex->set_after_input_sections();

      // This tells the driver code to wait until the symbol table has
      // written out before writing out the postprocessing sections,
      // including the .dynsym_shndx section.
      this->any_postprocessing_sections_ = true;
    }

  // Create the dynamic string table section.

  Output_section* dynstr = this->choose_output_section(NULL, ".dynstr",
                                                       elfcpp::SHT_STRTAB,
                                                       elfcpp::SHF_ALLOC,
                                                       false, false, true,
                                                       false, false, false);

  Output_section_data* strdata = new Output_data_strtab(&this->dynpool_);
  dynstr->add_output_section_data(strdata);

  dynsym->set_link_section(dynstr);
  this->dynamic_section_->set_link_section(dynstr);

  odyn->add_section_address(elfcpp::DT_STRTAB, dynstr);
  odyn->add_section_size(elfcpp::DT_STRSZ, dynstr);

  *pdynstr = dynstr;

  // Create the hash tables.

  if (strcmp(parameters->options().hash_style(), "sysv") == 0
      || strcmp(parameters->options().hash_style(), "both") == 0)
    {
      unsigned char* phash;
      unsigned int hashlen;
      Dynobj::create_elf_hash_table(*pdynamic_symbols, local_symcount,
                                    &phash, &hashlen);

      Output_section* hashsec = this->choose_output_section(NULL, ".hash",
                                                            elfcpp::SHT_HASH,
                                                            elfcpp::SHF_ALLOC,
                                                            false, false, true,
                                                            false, false,
                                                            false);

      Output_section_data* hashdata = new Output_data_const_buffer(phash,
                                                                   hashlen,
                                                                   align,
                                                                   "** hash");
      hashsec->add_output_section_data(hashdata);

      hashsec->set_link_section(dynsym);
      hashsec->set_entsize(4);

      odyn->add_section_address(elfcpp::DT_HASH, hashsec);
    }

  if (strcmp(parameters->options().hash_style(), "gnu") == 0
      || strcmp(parameters->options().hash_style(), "both") == 0)
    {
      unsigned char* phash;
      unsigned int hashlen;
      Dynobj::create_gnu_hash_table(*pdynamic_symbols, local_symcount,
                                    &phash, &hashlen);

      Output_section* hashsec = this->choose_output_section(NULL, ".gnu.hash",
                                                            elfcpp::SHT_GNU_HASH,
                                                            elfcpp::SHF_ALLOC,
                                                            false, false, true,
                                                            false, false,
                                                            false);

      Output_section_data* hashdata = new Output_data_const_buffer(phash,
                                                                   hashlen,
                                                                   align,
                                                                   "** hash");
      hashsec->add_output_section_data(hashdata);

      hashsec->set_link_section(dynsym);

      // For a 64-bit target, the entries in .gnu.hash do not have a
      // uniform size, so we only set the entry size for a 32-bit
      // target.
      if (parameters->target().get_size() == 32)
        hashsec->set_entsize(4);

      odyn->add_section_address(elfcpp::DT_GNU_HASH, hashsec);
    }
}

// Assign offsets to each local portion of the dynamic symbol table.

void
Layout::assign_local_dynsym_offsets(const Input_objects* input_objects)
{
  Output_section* dynsym = this->dynsym_section_;
  gold_assert(dynsym != NULL);

  off_t off = dynsym->offset();

  // Skip the dummy symbol at the start of the section.
  off += dynsym->entsize();

  for (Input_objects::Relobj_iterator p = input_objects->relobj_begin();
       p != input_objects->relobj_end();
       ++p)
    {
      unsigned int count = (*p)->set_local_dynsym_offset(off);
      off += count * dynsym->entsize();
    }
}

// Create the version sections.

void
Layout::create_version_sections(const Versions* versions,
                                const Symbol_table* symtab,
                                unsigned int local_symcount,
                                const std::vector<Symbol*>& dynamic_symbols,
                                const Output_section* dynstr)
{
  if (!versions->any_defs() && !versions->any_needs())
    return;

  switch (parameters->size_and_endianness())
    {
#ifdef HAVE_TARGET_32_LITTLE
    case Parameters::TARGET_32_LITTLE:
      this->sized_create_version_sections<32, false>(versions, symtab,
                                                     local_symcount,
                                                     dynamic_symbols, dynstr);
      break;
#endif
#ifdef HAVE_TARGET_32_BIG
    case Parameters::TARGET_32_BIG:
      this->sized_create_version_sections<32, true>(versions, symtab,
                                                    local_symcount,
                                                    dynamic_symbols, dynstr);
      break;
#endif
#ifdef HAVE_TARGET_64_LITTLE
    case Parameters::TARGET_64_LITTLE:
      this->sized_create_version_sections<64, false>(versions, symtab,
                                                     local_symcount,
                                                     dynamic_symbols, dynstr);
      break;
#endif
#ifdef HAVE_TARGET_64_BIG
    case Parameters::TARGET_64_BIG:
      this->sized_create_version_sections<64, true>(versions, symtab,
                                                    local_symcount,
                                                    dynamic_symbols, dynstr);
      break;
#endif
    default:
      gold_unreachable();
    }
}

// Create the version sections, sized version.

template<int size, bool big_endian>
void
Layout::sized_create_version_sections(
    const Versions* versions,
    const Symbol_table* symtab,
    unsigned int local_symcount,
    const std::vector<Symbol*>& dynamic_symbols,
    const Output_section* dynstr)
{
  Output_section* vsec = this->choose_output_section(NULL, ".gnu.version",
                                                     elfcpp::SHT_GNU_versym,
                                                     elfcpp::SHF_ALLOC,
                                                     false, false, true,
                                                     false, false, false);

  unsigned char* vbuf;
  unsigned int vsize;
  versions->symbol_section_contents<size, big_endian>(symtab, &this->dynpool_,
                                                      local_symcount,
                                                      dynamic_symbols,
                                                      &vbuf, &vsize);

  Output_section_data* vdata = new Output_data_const_buffer(vbuf, vsize, 2,
                                                            "** versions");

  vsec->add_output_section_data(vdata);
  vsec->set_entsize(2);
  vsec->set_link_section(this->dynsym_section_);

  Output_data_dynamic* const odyn = this->dynamic_data_;
  odyn->add_section_address(elfcpp::DT_VERSYM, vsec);

  if (versions->any_defs())
    {
      Output_section* vdsec;
      vdsec= this->choose_output_section(NULL, ".gnu.version_d",
                                         elfcpp::SHT_GNU_verdef,
                                         elfcpp::SHF_ALLOC,
                                         false, false, true, false, false,
                                         false);

      unsigned char* vdbuf;
      unsigned int vdsize;
      unsigned int vdentries;
      versions->def_section_contents<size, big_endian>(&this->dynpool_, &vdbuf,
                                                       &vdsize, &vdentries);

      Output_section_data* vddata =
        new Output_data_const_buffer(vdbuf, vdsize, 4, "** version defs");

      vdsec->add_output_section_data(vddata);
      vdsec->set_link_section(dynstr);
      vdsec->set_info(vdentries);

      odyn->add_section_address(elfcpp::DT_VERDEF, vdsec);
      odyn->add_constant(elfcpp::DT_VERDEFNUM, vdentries);
    }

  if (versions->any_needs())
    {
      Output_section* vnsec;
      vnsec = this->choose_output_section(NULL, ".gnu.version_r",
                                          elfcpp::SHT_GNU_verneed,
                                          elfcpp::SHF_ALLOC,
                                          false, false, true, false, false,
                                          false);

      unsigned char* vnbuf;
      unsigned int vnsize;
      unsigned int vnentries;
      versions->need_section_contents<size, big_endian>(&this->dynpool_,
                                                        &vnbuf, &vnsize,
                                                        &vnentries);

      Output_section_data* vndata =
        new Output_data_const_buffer(vnbuf, vnsize, 4, "** version refs");

      vnsec->add_output_section_data(vndata);
      vnsec->set_link_section(dynstr);
      vnsec->set_info(vnentries);

      odyn->add_section_address(elfcpp::DT_VERNEED, vnsec);
      odyn->add_constant(elfcpp::DT_VERNEEDNUM, vnentries);
    }
}

// Create the .interp section and PT_INTERP segment.

void
Layout::create_interp(const Target* target)
{
  const char* interp = parameters->options().dynamic_linker();
  if (interp == NULL)
    {
      interp = target->dynamic_linker();
      gold_assert(interp != NULL);
    }

  size_t len = strlen(interp) + 1;

  Output_section_data* odata = new Output_data_const(interp, len, 1);

  Output_section* osec = this->choose_output_section(NULL, ".interp",
                                                     elfcpp::SHT_PROGBITS,
                                                     elfcpp::SHF_ALLOC,
                                                     false, true, true,
                                                     false, false, false);
  osec->add_output_section_data(odata);

  if (!this->script_options_->saw_phdrs_clause())
    {
      Output_segment* oseg = this->make_output_segment(elfcpp::PT_INTERP,
                                                       elfcpp::PF_R);
      oseg->add_output_section(osec, elfcpp::PF_R, false);
    }
}

// Finish the .dynamic section and PT_DYNAMIC segment.

void
Layout::finish_dynamic_section(const Input_objects* input_objects,
                               const Symbol_table* symtab)
{
  if (!this->script_options_->saw_phdrs_clause())
    {
      Output_segment* oseg = this->make_output_segment(elfcpp::PT_DYNAMIC,
                                                       (elfcpp::PF_R
                                                        | elfcpp::PF_W));
      oseg->add_output_section(this->dynamic_section_,
                               elfcpp::PF_R | elfcpp::PF_W,
                               false);
    }

  Output_data_dynamic* const odyn = this->dynamic_data_;

  for (Input_objects::Dynobj_iterator p = input_objects->dynobj_begin();
       p != input_objects->dynobj_end();
       ++p)
    {
      if (!(*p)->is_needed()
          && (*p)->input_file()->options().as_needed())
        {
          // This dynamic object was linked with --as-needed, but it
          // is not needed.
          continue;
        }

      odyn->add_string(elfcpp::DT_NEEDED, (*p)->soname());
    }

  if (parameters->options().shared())
    {
      const char* soname = parameters->options().soname();
      if (soname != NULL)
        odyn->add_string(elfcpp::DT_SONAME, soname);
    }

  Symbol* sym = symtab->lookup(parameters->options().init());
  if (sym != NULL && sym->is_defined() && !sym->is_from_dynobj())
    odyn->add_symbol(elfcpp::DT_INIT, sym);

  sym = symtab->lookup(parameters->options().fini());
  if (sym != NULL && sym->is_defined() && !sym->is_from_dynobj())
    odyn->add_symbol(elfcpp::DT_FINI, sym);

  // Look for .init_array, .preinit_array and .fini_array by checking
  // section types.
  for(Layout::Section_list::const_iterator p = this->section_list_.begin();
      p != this->section_list_.end();
      ++p)
    switch((*p)->type())
      {
      case elfcpp::SHT_FINI_ARRAY:
        odyn->add_section_address(elfcpp::DT_FINI_ARRAY, *p);
        odyn->add_section_size(elfcpp::DT_FINI_ARRAYSZ, *p); 
        break;
      case elfcpp::SHT_INIT_ARRAY:
        odyn->add_section_address(elfcpp::DT_INIT_ARRAY, *p);
        odyn->add_section_size(elfcpp::DT_INIT_ARRAYSZ, *p); 
        break;
      case elfcpp::SHT_PREINIT_ARRAY:
        odyn->add_section_address(elfcpp::DT_PREINIT_ARRAY, *p);
        odyn->add_section_size(elfcpp::DT_PREINIT_ARRAYSZ, *p); 
        break;
      default:
        break;
      }
  
  // Add a DT_RPATH entry if needed.
  const General_options::Dir_list& rpath(parameters->options().rpath());
  if (!rpath.empty())
    {
      std::string rpath_val;
      for (General_options::Dir_list::const_iterator p = rpath.begin();
           p != rpath.end();
           ++p)
        {
          if (rpath_val.empty())
            rpath_val = p->name();
          else
            {
              // Eliminate duplicates.
              General_options::Dir_list::const_iterator q;
              for (q = rpath.begin(); q != p; ++q)
                if (q->name() == p->name())
                  break;
              if (q == p)
                {
                  rpath_val += ':';
                  rpath_val += p->name();
                }
            }
        }

      odyn->add_string(elfcpp::DT_RPATH, rpath_val);
      if (parameters->options().enable_new_dtags())
        odyn->add_string(elfcpp::DT_RUNPATH, rpath_val);
    }

  // Look for text segments that have dynamic relocations.
  bool have_textrel = false;
  if (!this->script_options_->saw_sections_clause())
    {
      for (Segment_list::const_iterator p = this->segment_list_.begin();
           p != this->segment_list_.end();
           ++p)
        {
          if (((*p)->flags() & elfcpp::PF_W) == 0
              && (*p)->dynamic_reloc_count() > 0)
            {
              have_textrel = true;
              break;
            }
        }
    }
  else
    {
      // We don't know the section -> segment mapping, so we are
      // conservative and just look for readonly sections with
      // relocations.  If those sections wind up in writable segments,
      // then we have created an unnecessary DT_TEXTREL entry.
      for (Section_list::const_iterator p = this->section_list_.begin();
           p != this->section_list_.end();
           ++p)
        {
          if (((*p)->flags() & elfcpp::SHF_ALLOC) != 0
              && ((*p)->flags() & elfcpp::SHF_WRITE) == 0
              && ((*p)->dynamic_reloc_count() > 0))
            {
              have_textrel = true;
              break;
            }
        }
    }

  // Add a DT_FLAGS entry. We add it even if no flags are set so that
  // post-link tools can easily modify these flags if desired.
  unsigned int flags = 0;
  if (have_textrel)
    {
      // Add a DT_TEXTREL for compatibility with older loaders.
      odyn->add_constant(elfcpp::DT_TEXTREL, 0);
      flags |= elfcpp::DF_TEXTREL;
    }
  if (parameters->options().shared() && this->has_static_tls())
    flags |= elfcpp::DF_STATIC_TLS;
  if (parameters->options().origin())
    flags |= elfcpp::DF_ORIGIN;
  if (parameters->options().Bsymbolic())
    {
      flags |= elfcpp::DF_SYMBOLIC;
      // Add DT_SYMBOLIC for compatibility with older loaders.
      odyn->add_constant(elfcpp::DT_SYMBOLIC, 0);
    }
  if (parameters->options().now())
    flags |= elfcpp::DF_BIND_NOW;
  odyn->add_constant(elfcpp::DT_FLAGS, flags);

  flags = 0;
  if (parameters->options().initfirst())
    flags |= elfcpp::DF_1_INITFIRST;
  if (parameters->options().interpose())
    flags |= elfcpp::DF_1_INTERPOSE;
  if (parameters->options().loadfltr())
    flags |= elfcpp::DF_1_LOADFLTR;
  if (parameters->options().nodefaultlib())
    flags |= elfcpp::DF_1_NODEFLIB;
  if (parameters->options().nodelete())
    flags |= elfcpp::DF_1_NODELETE;
  if (parameters->options().nodlopen())
    flags |= elfcpp::DF_1_NOOPEN;
  if (parameters->options().nodump())
    flags |= elfcpp::DF_1_NODUMP;
  if (!parameters->options().shared())
    flags &= ~(elfcpp::DF_1_INITFIRST
               | elfcpp::DF_1_NODELETE
               | elfcpp::DF_1_NOOPEN);
  if (parameters->options().origin())
    flags |= elfcpp::DF_1_ORIGIN;
  if (parameters->options().now())
    flags |= elfcpp::DF_1_NOW;
  if (flags)
    odyn->add_constant(elfcpp::DT_FLAGS_1, flags);
}

// Set the size of the _DYNAMIC symbol table to be the size of the
// dynamic data.

void
Layout::set_dynamic_symbol_size(const Symbol_table* symtab)
{
  Output_data_dynamic* const odyn = this->dynamic_data_;
  odyn->finalize_data_size();
  off_t data_size = odyn->data_size();
  const int size = parameters->target().get_size();
  if (size == 32)
    symtab->get_sized_symbol<32>(this->dynamic_symbol_)->set_symsize(data_size);
  else if (size == 64)
    symtab->get_sized_symbol<64>(this->dynamic_symbol_)->set_symsize(data_size);
  else
    gold_unreachable();
}

// The mapping of input section name prefixes to output section names.
// In some cases one prefix is itself a prefix of another prefix; in
// such a case the longer prefix must come first.  These prefixes are
// based on the GNU linker default ELF linker script.

#define MAPPING_INIT(f, t) { f, sizeof(f) - 1, t, sizeof(t) - 1 }
const Layout::Section_name_mapping Layout::section_name_mapping[] =
{
  MAPPING_INIT(".text.", ".text"),
  MAPPING_INIT(".ctors.", ".ctors"),
  MAPPING_INIT(".dtors.", ".dtors"),
  MAPPING_INIT(".rodata.", ".rodata"),
  MAPPING_INIT(".data.rel.ro.local", ".data.rel.ro.local"),
  MAPPING_INIT(".data.rel.ro", ".data.rel.ro"),
  MAPPING_INIT(".data.", ".data"),
  MAPPING_INIT(".bss.", ".bss"),
  MAPPING_INIT(".tdata.", ".tdata"),
  MAPPING_INIT(".tbss.", ".tbss"),
  MAPPING_INIT(".init_array.", ".init_array"),
  MAPPING_INIT(".fini_array.", ".fini_array"),
  MAPPING_INIT(".sdata.", ".sdata"),
  MAPPING_INIT(".sbss.", ".sbss"),
  // FIXME: In the GNU linker, .sbss2 and .sdata2 are handled
  // differently depending on whether it is creating a shared library.
  MAPPING_INIT(".sdata2.", ".sdata"),
  MAPPING_INIT(".sbss2.", ".sbss"),
  MAPPING_INIT(".lrodata.", ".lrodata"),
  MAPPING_INIT(".ldata.", ".ldata"),
  MAPPING_INIT(".lbss.", ".lbss"),
  MAPPING_INIT(".gcc_except_table.", ".gcc_except_table"),
  MAPPING_INIT(".gnu.linkonce.d.rel.ro.local.", ".data.rel.ro.local"),
  MAPPING_INIT(".gnu.linkonce.d.rel.ro.", ".data.rel.ro"),
  MAPPING_INIT(".gnu.linkonce.t.", ".text"),
  MAPPING_INIT(".gnu.linkonce.r.", ".rodata"),
  MAPPING_INIT(".gnu.linkonce.d.", ".data"),
  MAPPING_INIT(".gnu.linkonce.b.", ".bss"),
  MAPPING_INIT(".gnu.linkonce.s.", ".sdata"),
  MAPPING_INIT(".gnu.linkonce.sb.", ".sbss"),
  MAPPING_INIT(".gnu.linkonce.s2.", ".sdata"),
  MAPPING_INIT(".gnu.linkonce.sb2.", ".sbss"),
  MAPPING_INIT(".gnu.linkonce.wi.", ".debug_info"),
  MAPPING_INIT(".gnu.linkonce.td.", ".tdata"),
  MAPPING_INIT(".gnu.linkonce.tb.", ".tbss"),
  MAPPING_INIT(".gnu.linkonce.lr.", ".lrodata"),
  MAPPING_INIT(".gnu.linkonce.l.", ".ldata"),
  MAPPING_INIT(".gnu.linkonce.lb.", ".lbss"),
  MAPPING_INIT(".ARM.extab.", ".ARM.extab"),
  MAPPING_INIT(".gnu.linkonce.armextab.", ".ARM.extab"),
  MAPPING_INIT(".ARM.exidx.", ".ARM.exidx"),
  MAPPING_INIT(".gnu.linkonce.armexidx.", ".ARM.exidx"),
};
#undef MAPPING_INIT

const int Layout::section_name_mapping_count =
  (sizeof(Layout::section_name_mapping)
   / sizeof(Layout::section_name_mapping[0]));

// Choose the output section name to use given an input section name.
// Set *PLEN to the length of the name.  *PLEN is initialized to the
// length of NAME.

const char*
Layout::output_section_name(const char* name, size_t* plen)
{
  // gcc 4.3 generates the following sorts of section names when it
  // needs a section name specific to a function:
  //   .text.FN
  //   .rodata.FN
  //   .sdata2.FN
  //   .data.FN
  //   .data.rel.FN
  //   .data.rel.local.FN
  //   .data.rel.ro.FN
  //   .data.rel.ro.local.FN
  //   .sdata.FN
  //   .bss.FN
  //   .sbss.FN
  //   .tdata.FN
  //   .tbss.FN

  // The GNU linker maps all of those to the part before the .FN,
  // except that .data.rel.local.FN is mapped to .data, and
  // .data.rel.ro.local.FN is mapped to .data.rel.ro.  The sections
  // beginning with .data.rel.ro.local are grouped together.

  // For an anonymous namespace, the string FN can contain a '.'.

  // Also of interest: .rodata.strN.N, .rodata.cstN, both of which the
  // GNU linker maps to .rodata.

  // The .data.rel.ro sections are used with -z relro.  The sections
  // are recognized by name.  We use the same names that the GNU
  // linker does for these sections.

  // It is hard to handle this in a principled way, so we don't even
  // try.  We use a table of mappings.  If the input section name is
  // not found in the table, we simply use it as the output section
  // name.

  const Section_name_mapping* psnm = section_name_mapping;
  for (int i = 0; i < section_name_mapping_count; ++i, ++psnm)
    {
      if (strncmp(name, psnm->from, psnm->fromlen) == 0)
        {
          *plen = psnm->tolen;
          return psnm->to;
        }
    }

  return name;
}

// Check if a comdat group or .gnu.linkonce section with the given
// NAME is selected for the link.  If there is already a section,
// *KEPT_SECTION is set to point to the existing section and the
// function returns false.  Otherwise, OBJECT, SHNDX, IS_COMDAT, and
// IS_GROUP_NAME are recorded for this NAME in the layout object,
// *KEPT_SECTION is set to the internal copy and the function returns
// true.

bool
Layout::find_or_add_kept_section(const std::string& name,
                                 Relobj* object,
                                 unsigned int shndx,
                                 bool is_comdat,
                                 bool is_group_name,
                                 Kept_section** kept_section)
{
  // It's normal to see a couple of entries here, for the x86 thunk
  // sections.  If we see more than a few, we're linking a C++
  // program, and we resize to get more space to minimize rehashing.
  if (this->signatures_.size() > 4
      && !this->resized_signatures_)
    {
      reserve_unordered_map(&this->signatures_,
                            this->number_of_input_files_ * 64);
      this->resized_signatures_ = true;
    }

  Kept_section candidate;
  std::pair<Signatures::iterator, bool> ins =
    this->signatures_.insert(std::make_pair(name, candidate));

  if (kept_section != NULL)
    *kept_section = &ins.first->second;
  if (ins.second)
    {
      // This is the first time we've seen this signature.
      ins.first->second.set_object(object);
      ins.first->second.set_shndx(shndx);
      if (is_comdat)
        ins.first->second.set_is_comdat();
      if (is_group_name)
        ins.first->second.set_is_group_name();
      return true;
    }

  // We have already seen this signature.

  if (ins.first->second.is_group_name())
    {
      // We've already seen a real section group with this signature.
      // If the kept group is from a plugin object, and we're in the
      // replacement phase, accept the new one as a replacement.
      if (ins.first->second.object() == NULL
          && parameters->options().plugins()->in_replacement_phase())
        {
          ins.first->second.set_object(object);
          ins.first->second.set_shndx(shndx);
          return true;
        }
      return false;
    }
  else if (is_group_name)
    {
      // This is a real section group, and we've already seen a
      // linkonce section with this signature.  Record that we've seen
      // a section group, and don't include this section group.
      ins.first->second.set_is_group_name();
      return false;
    }
  else
    {
      // We've already seen a linkonce section and this is a linkonce
      // section.  These don't block each other--this may be the same
      // symbol name with different section types.
      return true;
    }
}

// Store the allocated sections into the section list.

void
Layout::get_allocated_sections(Section_list* section_list) const
{
  for (Section_list::const_iterator p = this->section_list_.begin();
       p != this->section_list_.end();
       ++p)
    if (((*p)->flags() & elfcpp::SHF_ALLOC) != 0)
      section_list->push_back(*p);
}

// Create an output segment.

Output_segment*
Layout::make_output_segment(elfcpp::Elf_Word type, elfcpp::Elf_Word flags)
{
  gold_assert(!parameters->options().relocatable());
  Output_segment* oseg = new Output_segment(type, flags);
  this->segment_list_.push_back(oseg);

  if (type == elfcpp::PT_TLS)
    this->tls_segment_ = oseg;
  else if (type == elfcpp::PT_GNU_RELRO)
    this->relro_segment_ = oseg;

  return oseg;
}

// Write out the Output_sections.  Most won't have anything to write,
// since most of the data will come from input sections which are
// handled elsewhere.  But some Output_sections do have Output_data.

void
Layout::write_output_sections(Output_file* of) const
{
  for (Section_list::const_iterator p = this->section_list_.begin();
       p != this->section_list_.end();
       ++p)
    {
      if (!(*p)->after_input_sections())
        (*p)->write(of);
    }
}

// Write out data not associated with a section or the symbol table.

void
Layout::write_data(const Symbol_table* symtab, Output_file* of) const
{
  if (!parameters->options().strip_all())
    {
      const Output_section* symtab_section = this->symtab_section_;
      for (Section_list::const_iterator p = this->section_list_.begin();
           p != this->section_list_.end();
           ++p)
        {
          if ((*p)->needs_symtab_index())
            {
              gold_assert(symtab_section != NULL);
              unsigned int index = (*p)->symtab_index();
              gold_assert(index > 0 && index != -1U);
              off_t off = (symtab_section->offset()
                           + index * symtab_section->entsize());
              symtab->write_section_symbol(*p, this->symtab_xindex_, of, off);
            }
        }
    }

  const Output_section* dynsym_section = this->dynsym_section_;
  for (Section_list::const_iterator p = this->section_list_.begin();
       p != this->section_list_.end();
       ++p)
    {
      if ((*p)->needs_dynsym_index())
        {
          gold_assert(dynsym_section != NULL);
          unsigned int index = (*p)->dynsym_index();
          gold_assert(index > 0 && index != -1U);
          off_t off = (dynsym_section->offset()
                       + index * dynsym_section->entsize());
          symtab->write_section_symbol(*p, this->dynsym_xindex_, of, off);
        }
    }

  // Write out the Output_data which are not in an Output_section.
  for (Data_list::const_iterator p = this->special_output_list_.begin();
       p != this->special_output_list_.end();
       ++p)
    (*p)->write(of);
}

// Write out the Output_sections which can only be written after the
// input sections are complete.

void
Layout::write_sections_after_input_sections(Output_file* of)
{
  // Determine the final section offsets, and thus the final output
  // file size.  Note we finalize the .shstrab last, to allow the
  // after_input_section sections to modify their section-names before
  // writing.
  if (this->any_postprocessing_sections_)
    {
      off_t off = this->output_file_size_;
      off = this->set_section_offsets(off, POSTPROCESSING_SECTIONS_PASS);

      // Now that we've finalized the names, we can finalize the shstrab.
      off =
        this->set_section_offsets(off,
                                  STRTAB_AFTER_POSTPROCESSING_SECTIONS_PASS);

      if (off > this->output_file_size_)
        {
          of->resize(off);
          this->output_file_size_ = off;
        }
    }

  for (Section_list::const_iterator p = this->section_list_.begin();
       p != this->section_list_.end();
       ++p)
    {
      if ((*p)->after_input_sections())
        (*p)->write(of);
    }

  this->section_headers_->write(of);
}

// If the build ID requires computing a checksum, do so here, and
// write it out.  We compute a checksum over the entire file because
// that is simplest.

void
Layout::write_build_id(Output_file* of) const
{
  if (this->build_id_note_ == NULL)
    return;

  const unsigned char* iv = of->get_input_view(0, this->output_file_size_);

  unsigned char* ov = of->get_output_view(this->build_id_note_->offset(),
                                          this->build_id_note_->data_size());

  const char* style = parameters->options().build_id();
  if (strcmp(style, "sha1") == 0)
    {
      sha1_ctx ctx;
      sha1_init_ctx(&ctx);
      sha1_process_bytes(iv, this->output_file_size_, &ctx);
      sha1_finish_ctx(&ctx, ov);
    }
  else if (strcmp(style, "md5") == 0)
    {
      md5_ctx ctx;
      md5_init_ctx(&ctx);
      md5_process_bytes(iv, this->output_file_size_, &ctx);
      md5_finish_ctx(&ctx, ov);
    }
  else
    gold_unreachable();

  of->write_output_view(this->build_id_note_->offset(),
                        this->build_id_note_->data_size(),
                        ov);

  of->free_input_view(0, this->output_file_size_, iv);
}

// Write out a binary file.  This is called after the link is
// complete.  IN is the temporary output file we used to generate the
// ELF code.  We simply walk through the segments, read them from
// their file offset in IN, and write them to their load address in
// the output file.  FIXME: with a bit more work, we could support
// S-records and/or Intel hex format here.

void
Layout::write_binary(Output_file* in) const
{
  gold_assert(parameters->options().oformat_enum()
              == General_options::OBJECT_FORMAT_BINARY);

  // Get the size of the binary file.
  uint64_t max_load_address = 0;
  for (Segment_list::const_iterator p = this->segment_list_.begin();
       p != this->segment_list_.end();
       ++p)
    {
      if ((*p)->type() == elfcpp::PT_LOAD && (*p)->filesz() > 0)
        {
          uint64_t max_paddr = (*p)->paddr() + (*p)->filesz();
          if (max_paddr > max_load_address)
            max_load_address = max_paddr;
        }
    }

  Output_file out(parameters->options().output_file_name());
  out.open(max_load_address);

  for (Segment_list::const_iterator p = this->segment_list_.begin();
       p != this->segment_list_.end();
       ++p)
    {
      if ((*p)->type() == elfcpp::PT_LOAD && (*p)->filesz() > 0)
        {
          const unsigned char* vin = in->get_input_view((*p)->offset(),
                                                        (*p)->filesz());
          unsigned char* vout = out.get_output_view((*p)->paddr(),
                                                    (*p)->filesz());
          memcpy(vout, vin, (*p)->filesz());
          out.write_output_view((*p)->paddr(), (*p)->filesz(), vout);
          in->free_input_view((*p)->offset(), (*p)->filesz(), vin);
        }
    }

  out.close();
}

// Print the output sections to the map file.

void
Layout::print_to_mapfile(Mapfile* mapfile) const
{
  for (Segment_list::const_iterator p = this->segment_list_.begin();
       p != this->segment_list_.end();
       ++p)
    (*p)->print_sections_to_mapfile(mapfile);
}

// Print statistical information to stderr.  This is used for --stats.

void
Layout::print_stats() const
{
  this->namepool_.print_stats("section name pool");
  this->sympool_.print_stats("output symbol name pool");
  this->dynpool_.print_stats("dynamic name pool");

  for (Section_list::const_iterator p = this->section_list_.begin();
       p != this->section_list_.end();
       ++p)
    (*p)->print_merge_stats();
}

// Write_sections_task methods.

// We can always run this task.

Task_token*
Write_sections_task::is_runnable()
{
  return NULL;
}

// We need to unlock both OUTPUT_SECTIONS_BLOCKER and FINAL_BLOCKER
// when finished.

void
Write_sections_task::locks(Task_locker* tl)
{
  tl->add(this, this->output_sections_blocker_);
  tl->add(this, this->final_blocker_);
}

// Run the task--write out the data.

void
Write_sections_task::run(Workqueue*)
{
  this->layout_->write_output_sections(this->of_);
}

// Write_data_task methods.

// We can always run this task.

Task_token*
Write_data_task::is_runnable()
{
  return NULL;
}

// We need to unlock FINAL_BLOCKER when finished.

void
Write_data_task::locks(Task_locker* tl)
{
  tl->add(this, this->final_blocker_);
}

// Run the task--write out the data.

void
Write_data_task::run(Workqueue*)
{
  this->layout_->write_data(this->symtab_, this->of_);
}

// Write_symbols_task methods.

// We can always run this task.

Task_token*
Write_symbols_task::is_runnable()
{
  return NULL;
}

// We need to unlock FINAL_BLOCKER when finished.

void
Write_symbols_task::locks(Task_locker* tl)
{
  tl->add(this, this->final_blocker_);
}

// Run the task--write out the symbols.

void
Write_symbols_task::run(Workqueue*)
{
  this->symtab_->write_globals(this->sympool_, this->dynpool_,
                               this->layout_->symtab_xindex(),
                               this->layout_->dynsym_xindex(), this->of_);
}

// Write_after_input_sections_task methods.

// We can only run this task after the input sections have completed.

Task_token*
Write_after_input_sections_task::is_runnable()
{
  if (this->input_sections_blocker_->is_blocked())
    return this->input_sections_blocker_;
  return NULL;
}

// We need to unlock FINAL_BLOCKER when finished.

void
Write_after_input_sections_task::locks(Task_locker* tl)
{
  tl->add(this, this->final_blocker_);
}

// Run the task.

void
Write_after_input_sections_task::run(Workqueue*)
{
  this->layout_->write_sections_after_input_sections(this->of_);
}

// Close_task_runner methods.

// Run the task--close the file.

void
Close_task_runner::run(Workqueue*, const Task*)
{
  // If we need to compute a checksum for the BUILD if, we do so here.
  this->layout_->write_build_id(this->of_);

  // If we've been asked to create a binary file, we do so here.
  if (this->options_->oformat_enum() != General_options::OBJECT_FORMAT_ELF)
    this->layout_->write_binary(this->of_);

  this->of_->close();
}

// Instantiate the templates we need.  We could use the configure
// script to restrict this to only the ones for implemented targets.

#ifdef HAVE_TARGET_32_LITTLE
template
Output_section*
Layout::layout<32, false>(Sized_relobj<32, false>* object, unsigned int shndx,
                          const char* name,
                          const elfcpp::Shdr<32, false>& shdr,
                          unsigned int, unsigned int, off_t*);
#endif

#ifdef HAVE_TARGET_32_BIG
template
Output_section*
Layout::layout<32, true>(Sized_relobj<32, true>* object, unsigned int shndx,
                         const char* name,
                         const elfcpp::Shdr<32, true>& shdr,
                         unsigned int, unsigned int, off_t*);
#endif

#ifdef HAVE_TARGET_64_LITTLE
template
Output_section*
Layout::layout<64, false>(Sized_relobj<64, false>* object, unsigned int shndx,
                          const char* name,
                          const elfcpp::Shdr<64, false>& shdr,
                          unsigned int, unsigned int, off_t*);
#endif

#ifdef HAVE_TARGET_64_BIG
template
Output_section*
Layout::layout<64, true>(Sized_relobj<64, true>* object, unsigned int shndx,
                         const char* name,
                         const elfcpp::Shdr<64, true>& shdr,
                         unsigned int, unsigned int, off_t*);
#endif

#ifdef HAVE_TARGET_32_LITTLE
template
Output_section*
Layout::layout_reloc<32, false>(Sized_relobj<32, false>* object,
                                unsigned int reloc_shndx,
                                const elfcpp::Shdr<32, false>& shdr,
                                Output_section* data_section,
                                Relocatable_relocs* rr);
#endif

#ifdef HAVE_TARGET_32_BIG
template
Output_section*
Layout::layout_reloc<32, true>(Sized_relobj<32, true>* object,
                               unsigned int reloc_shndx,
                               const elfcpp::Shdr<32, true>& shdr,
                               Output_section* data_section,
                               Relocatable_relocs* rr);
#endif

#ifdef HAVE_TARGET_64_LITTLE
template
Output_section*
Layout::layout_reloc<64, false>(Sized_relobj<64, false>* object,
                                unsigned int reloc_shndx,
                                const elfcpp::Shdr<64, false>& shdr,
                                Output_section* data_section,
                                Relocatable_relocs* rr);
#endif

#ifdef HAVE_TARGET_64_BIG
template
Output_section*
Layout::layout_reloc<64, true>(Sized_relobj<64, true>* object,
                               unsigned int reloc_shndx,
                               const elfcpp::Shdr<64, true>& shdr,
                               Output_section* data_section,
                               Relocatable_relocs* rr);
#endif

#ifdef HAVE_TARGET_32_LITTLE
template
void
Layout::layout_group<32, false>(Symbol_table* symtab,
                                Sized_relobj<32, false>* object,
                                unsigned int,
                                const char* group_section_name,
                                const char* signature,
                                const elfcpp::Shdr<32, false>& shdr,
                                elfcpp::Elf_Word flags,
                                std::vector<unsigned int>* shndxes);
#endif

#ifdef HAVE_TARGET_32_BIG
template
void
Layout::layout_group<32, true>(Symbol_table* symtab,
                               Sized_relobj<32, true>* object,
                               unsigned int,
                               const char* group_section_name,
                               const char* signature,
                               const elfcpp::Shdr<32, true>& shdr,
                               elfcpp::Elf_Word flags,
                               std::vector<unsigned int>* shndxes);
#endif

#ifdef HAVE_TARGET_64_LITTLE
template
void
Layout::layout_group<64, false>(Symbol_table* symtab,
                                Sized_relobj<64, false>* object,
                                unsigned int,
                                const char* group_section_name,
                                const char* signature,
                                const elfcpp::Shdr<64, false>& shdr,
                                elfcpp::Elf_Word flags,
                                std::vector<unsigned int>* shndxes);
#endif

#ifdef HAVE_TARGET_64_BIG
template
void
Layout::layout_group<64, true>(Symbol_table* symtab,
                               Sized_relobj<64, true>* object,
                               unsigned int,
                               const char* group_section_name,
                               const char* signature,
                               const elfcpp::Shdr<64, true>& shdr,
                               elfcpp::Elf_Word flags,
                               std::vector<unsigned int>* shndxes);
#endif

#ifdef HAVE_TARGET_32_LITTLE
template
Output_section*
Layout::layout_eh_frame<32, false>(Sized_relobj<32, false>* object,
                                   const unsigned char* symbols,
                                   off_t symbols_size,
                                   const unsigned char* symbol_names,
                                   off_t symbol_names_size,
                                   unsigned int shndx,
                                   const elfcpp::Shdr<32, false>& shdr,
                                   unsigned int reloc_shndx,
                                   unsigned int reloc_type,
                                   off_t* off);
#endif

#ifdef HAVE_TARGET_32_BIG
template
Output_section*
Layout::layout_eh_frame<32, true>(Sized_relobj<32, true>* object,
                                   const unsigned char* symbols,
                                   off_t symbols_size,
                                  const unsigned char* symbol_names,
                                  off_t symbol_names_size,
                                  unsigned int shndx,
                                  const elfcpp::Shdr<32, true>& shdr,
                                  unsigned int reloc_shndx,
                                  unsigned int reloc_type,
                                  off_t* off);
#endif

#ifdef HAVE_TARGET_64_LITTLE
template
Output_section*
Layout::layout_eh_frame<64, false>(Sized_relobj<64, false>* object,
                                   const unsigned char* symbols,
                                   off_t symbols_size,
                                   const unsigned char* symbol_names,
                                   off_t symbol_names_size,
                                   unsigned int shndx,
                                   const elfcpp::Shdr<64, false>& shdr,
                                   unsigned int reloc_shndx,
                                   unsigned int reloc_type,
                                   off_t* off);
#endif

#ifdef HAVE_TARGET_64_BIG
template
Output_section*
Layout::layout_eh_frame<64, true>(Sized_relobj<64, true>* object,
                                   const unsigned char* symbols,
                                   off_t symbols_size,
                                  const unsigned char* symbol_names,
                                  off_t symbol_names_size,
                                  unsigned int shndx,
                                  const elfcpp::Shdr<64, true>& shdr,
                                  unsigned int reloc_shndx,
                                  unsigned int reloc_type,
                                  off_t* off);
#endif

} // End namespace gold.