1 /* GIO - GLib Input, Output and Streaming Library
3 * Copyright (C) 2006-2007 Red Hat, Inc.
5 * This library is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU Lesser General Public
7 * License as published by the Free Software Foundation; either
8 * version 2 of the License, or (at your option) any later version.
10 * This library is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 * Lesser General Public License for more details.
15 * You should have received a copy of the GNU Lesser General
16 * Public License along with this library; if not, write to the
17 * Free Software Foundation, Inc., 59 Temple Place, Suite 330,
18 * Boston, MA 02111-1307, USA.
20 * Author: Alexander Larsson <alexl@redhat.com>
23 #if !defined (__GIO_GIO_H_INSIDE__) && !defined (GIO_COMPILATION)
24 #error "Only <gio/gio.h> can be included directly."
27 #ifndef __GIO_ENUMS_H__
28 #define __GIO_ENUMS_H__
30 #include <glib-object.h>
36 * GAppInfoCreateFlags:
37 * @G_APP_INFO_CREATE_NONE: No flags.
38 * @G_APP_INFO_CREATE_NEEDS_TERMINAL: Application opens in a terminal window.
39 * @G_APP_INFO_CREATE_SUPPORTS_URIS: Application supports URI arguments.
40 * @G_APP_INFO_CREATE_SUPPORTS_STARTUP_NOTIFICATION: Application supports startup notification. Since 2.26
42 * Flags used when creating a #GAppInfo.
45 G_APP_INFO_CREATE_NONE = 0, /*< nick=none >*/
46 G_APP_INFO_CREATE_NEEDS_TERMINAL = (1 << 0), /*< nick=needs-terminal >*/
47 G_APP_INFO_CREATE_SUPPORTS_URIS = (1 << 1), /*< nick=supports-uris >*/
48 G_APP_INFO_CREATE_SUPPORTS_STARTUP_NOTIFICATION = (1 << 2) /*< nick=supports-startup-notification >*/
49 } GAppInfoCreateFlags;
53 * @G_CONVERTER_NO_FLAGS: No flags.
54 * @G_CONVERTER_INPUT_AT_END: At end of input data
55 * @G_CONVERTER_FLUSH: Flush data
57 * Flags used when calling a g_converter_convert().
62 G_CONVERTER_NO_FLAGS = 0, /*< nick=none >*/
63 G_CONVERTER_INPUT_AT_END = (1 << 0), /*< nick=input-at-end >*/
64 G_CONVERTER_FLUSH = (1 << 1) /*< nick=flush >*/
69 * @G_CONVERTER_ERROR: There was an error during conversion.
70 * @G_CONVERTER_CONVERTED: Some data was consumed or produced
71 * @G_CONVERTER_FINISHED: The conversion is finished
72 * @G_CONVERTER_FLUSHED: Flushing is finished
74 * Results returned from g_converter_convert().
79 G_CONVERTER_ERROR = 0, /*< nick=error >*/
80 G_CONVERTER_CONVERTED = 1, /*< nick=converted >*/
81 G_CONVERTER_FINISHED = 2, /*< nick=finished >*/
82 G_CONVERTER_FLUSHED = 3 /*< nick=flushed >*/
87 * GDataStreamByteOrder:
88 * @G_DATA_STREAM_BYTE_ORDER_BIG_ENDIAN: Selects Big Endian byte order.
89 * @G_DATA_STREAM_BYTE_ORDER_LITTLE_ENDIAN: Selects Little Endian byte order.
90 * @G_DATA_STREAM_BYTE_ORDER_HOST_ENDIAN: Selects endianness based on host machine's architecture.
92 * #GDataStreamByteOrder is used to ensure proper endianness of streaming data sources
93 * across various machine architectures.
97 G_DATA_STREAM_BYTE_ORDER_BIG_ENDIAN,
98 G_DATA_STREAM_BYTE_ORDER_LITTLE_ENDIAN,
99 G_DATA_STREAM_BYTE_ORDER_HOST_ENDIAN
100 } GDataStreamByteOrder;
104 * GDataStreamNewlineType:
105 * @G_DATA_STREAM_NEWLINE_TYPE_LF: Selects "LF" line endings, common on most modern UNIX platforms.
106 * @G_DATA_STREAM_NEWLINE_TYPE_CR: Selects "CR" line endings.
107 * @G_DATA_STREAM_NEWLINE_TYPE_CR_LF: Selects "CR, LF" line ending, common on Microsoft Windows.
108 * @G_DATA_STREAM_NEWLINE_TYPE_ANY: Automatically try to handle any line ending type.
110 * #GDataStreamNewlineType is used when checking for or setting the line endings for a given file.
113 G_DATA_STREAM_NEWLINE_TYPE_LF,
114 G_DATA_STREAM_NEWLINE_TYPE_CR,
115 G_DATA_STREAM_NEWLINE_TYPE_CR_LF,
116 G_DATA_STREAM_NEWLINE_TYPE_ANY
117 } GDataStreamNewlineType;
121 * GFileAttributeType:
122 * @G_FILE_ATTRIBUTE_TYPE_INVALID: indicates an invalid or uninitalized type.
123 * @G_FILE_ATTRIBUTE_TYPE_STRING: a null terminated UTF8 string.
124 * @G_FILE_ATTRIBUTE_TYPE_BYTE_STRING: a zero terminated string of non-zero bytes.
125 * @G_FILE_ATTRIBUTE_TYPE_BOOLEAN: a boolean value.
126 * @G_FILE_ATTRIBUTE_TYPE_UINT32: an unsigned 4-byte/32-bit integer.
127 * @G_FILE_ATTRIBUTE_TYPE_INT32: a signed 4-byte/32-bit integer.
128 * @G_FILE_ATTRIBUTE_TYPE_UINT64: an unsigned 8-byte/64-bit integer.
129 * @G_FILE_ATTRIBUTE_TYPE_INT64: a signed 8-byte/64-bit integer.
130 * @G_FILE_ATTRIBUTE_TYPE_OBJECT: a #GObject.
131 * @G_FILE_ATTRIBUTE_TYPE_STRINGV: a %NULL terminated char **. Since 2.22
133 * The data types for file attributes.
136 G_FILE_ATTRIBUTE_TYPE_INVALID = 0,
137 G_FILE_ATTRIBUTE_TYPE_STRING,
138 G_FILE_ATTRIBUTE_TYPE_BYTE_STRING, /* zero terminated string of non-zero bytes */
139 G_FILE_ATTRIBUTE_TYPE_BOOLEAN,
140 G_FILE_ATTRIBUTE_TYPE_UINT32,
141 G_FILE_ATTRIBUTE_TYPE_INT32,
142 G_FILE_ATTRIBUTE_TYPE_UINT64,
143 G_FILE_ATTRIBUTE_TYPE_INT64,
144 G_FILE_ATTRIBUTE_TYPE_OBJECT,
145 G_FILE_ATTRIBUTE_TYPE_STRINGV
146 } GFileAttributeType;
150 * GFileAttributeInfoFlags:
151 * @G_FILE_ATTRIBUTE_INFO_NONE: no flags set.
152 * @G_FILE_ATTRIBUTE_INFO_COPY_WITH_FILE: copy the attribute values when the file is copied.
153 * @G_FILE_ATTRIBUTE_INFO_COPY_WHEN_MOVED: copy the attribute values when the file is moved.
155 * Flags specifying the behaviour of an attribute.
158 G_FILE_ATTRIBUTE_INFO_NONE = 0,
159 G_FILE_ATTRIBUTE_INFO_COPY_WITH_FILE = (1 << 0),
160 G_FILE_ATTRIBUTE_INFO_COPY_WHEN_MOVED = (1 << 1)
161 } GFileAttributeInfoFlags;
165 * GFileAttributeStatus:
166 * @G_FILE_ATTRIBUTE_STATUS_UNSET: Attribute value is unset (empty).
167 * @G_FILE_ATTRIBUTE_STATUS_SET: Attribute value is set.
168 * @G_FILE_ATTRIBUTE_STATUS_ERROR_SETTING: Indicates an error in setting the value.
170 * Used by g_file_set_attributes_from_info() when setting file attributes.
173 G_FILE_ATTRIBUTE_STATUS_UNSET = 0,
174 G_FILE_ATTRIBUTE_STATUS_SET,
175 G_FILE_ATTRIBUTE_STATUS_ERROR_SETTING
176 } GFileAttributeStatus;
180 * GFileQueryInfoFlags:
181 * @G_FILE_QUERY_INFO_NONE: No flags set.
182 * @G_FILE_QUERY_INFO_NOFOLLOW_SYMLINKS: Don't follow symlinks.
184 * Flags used when querying a #GFileInfo.
187 G_FILE_QUERY_INFO_NONE = 0,
188 G_FILE_QUERY_INFO_NOFOLLOW_SYMLINKS = (1 << 0) /*< nick=nofollow-symlinks >*/
189 } GFileQueryInfoFlags;
194 * @G_FILE_CREATE_NONE: No flags set.
195 * @G_FILE_CREATE_PRIVATE: Create a file that can only be
196 * accessed by the current user.
197 * @G_FILE_CREATE_REPLACE_DESTINATION: Replace the destination
198 * as if it didn't exist before. Don't try to keep any old
199 * permissions, replace instead of following links. This
200 * is generally useful if you're doing a "copy over"
201 * rather than a "save new version of" replace operation.
202 * You can think of it as "unlink destination" before
203 * writing to it, although the implementation may not
204 * be exactly like that. Since 2.20
206 * Flags used when an operation may create a file.
209 G_FILE_CREATE_NONE = 0,
210 G_FILE_CREATE_PRIVATE = (1 << 0),
211 G_FILE_CREATE_REPLACE_DESTINATION = (1 << 1)
217 * @G_MOUNT_MOUNT_NONE: No flags set.
219 * Flags used when mounting a mount.
222 G_MOUNT_MOUNT_NONE = 0
227 * GMountUnmountFlags:
228 * @G_MOUNT_UNMOUNT_NONE: No flags set.
229 * @G_MOUNT_UNMOUNT_FORCE: Unmount even if there are outstanding
230 * file operations on the mount.
232 * Flags used when an unmounting a mount.
235 G_MOUNT_UNMOUNT_NONE = 0,
236 G_MOUNT_UNMOUNT_FORCE = (1 << 0)
237 } GMountUnmountFlags;
241 * @G_DRIVE_START_NONE: No flags set.
243 * Flags used when starting a drive.
248 G_DRIVE_START_NONE = 0
252 * GDriveStartStopType:
253 * @G_DRIVE_START_STOP_TYPE_UNKNOWN: Unknown or drive doesn't support
255 * @G_DRIVE_START_STOP_TYPE_SHUTDOWN: The stop method will physically
256 * shut down the drive and e.g. power down the port the drive is
258 * @G_DRIVE_START_STOP_TYPE_NETWORK: The start/stop methods are used
259 * for connecting/disconnect to the drive over the network.
260 * @G_DRIVE_START_STOP_TYPE_MULTIDISK: The start/stop methods will
261 * assemble/disassemble a virtual drive from several physical
263 * @G_DRIVE_START_STOP_TYPE_PASSWORD: The start/stop methods will
264 * unlock/lock the disk (for example using the ATA <quote>SECURITY
265 * UNLOCK DEVICE</quote> command)
267 * Enumeration describing how a drive can be started/stopped.
272 G_DRIVE_START_STOP_TYPE_UNKNOWN,
273 G_DRIVE_START_STOP_TYPE_SHUTDOWN,
274 G_DRIVE_START_STOP_TYPE_NETWORK,
275 G_DRIVE_START_STOP_TYPE_MULTIDISK,
276 G_DRIVE_START_STOP_TYPE_PASSWORD
277 } GDriveStartStopType;
281 * @G_FILE_COPY_NONE: No flags set.
282 * @G_FILE_COPY_OVERWRITE: Overwrite any existing files
283 * @G_FILE_COPY_BACKUP: Make a backup of any existing files.
284 * @G_FILE_COPY_NOFOLLOW_SYMLINKS: Don't follow symlinks.
285 * @G_FILE_COPY_ALL_METADATA: Copy all file metadata instead of just default set used for copy (see #GFileInfo).
286 * @G_FILE_COPY_NO_FALLBACK_FOR_MOVE: Don't use copy and delete fallback if native move not supported.
287 * @G_FILE_COPY_TARGET_DEFAULT_PERMS: Leaves target file with default perms, instead of setting the source file perms.
289 * Flags used when copying or moving files.
292 G_FILE_COPY_NONE = 0, /*< nick=none >*/
293 G_FILE_COPY_OVERWRITE = (1 << 0),
294 G_FILE_COPY_BACKUP = (1 << 1),
295 G_FILE_COPY_NOFOLLOW_SYMLINKS = (1 << 2),
296 G_FILE_COPY_ALL_METADATA = (1 << 3),
297 G_FILE_COPY_NO_FALLBACK_FOR_MOVE = (1 << 4),
298 G_FILE_COPY_TARGET_DEFAULT_PERMS = (1 << 5)
304 * @G_FILE_MONITOR_NONE: No flags set.
305 * @G_FILE_MONITOR_WATCH_MOUNTS: Watch for mount events.
306 * @G_FILE_MONITOR_SEND_MOVED: Pair DELETED and CREATED events caused
307 * by file renames (moves) and send a single G_FILE_MONITOR_EVENT_MOVED
308 * event instead (NB: not supported on all backends; the default
309 * behaviour -without specifying this flag- is to send single DELETED
310 * and CREATED events).
312 * Flags used to set what a #GFileMonitor will watch for.
315 G_FILE_MONITOR_NONE = 0,
316 G_FILE_MONITOR_WATCH_MOUNTS = (1 << 0),
317 G_FILE_MONITOR_SEND_MOVED = (1 << 1)
323 * @G_FILE_TYPE_UNKNOWN: File's type is unknown.
324 * @G_FILE_TYPE_REGULAR: File handle represents a regular file.
325 * @G_FILE_TYPE_DIRECTORY: File handle represents a directory.
326 * @G_FILE_TYPE_SYMBOLIC_LINK: File handle represents a symbolic link
328 * @G_FILE_TYPE_SPECIAL: File is a "special" file, such as a socket, fifo,
329 * block device, or character device.
330 * @G_FILE_TYPE_SHORTCUT: File is a shortcut (Windows systems).
331 * @G_FILE_TYPE_MOUNTABLE: File is a mountable location.
333 * Indicates the file's on-disk type.
336 G_FILE_TYPE_UNKNOWN = 0,
338 G_FILE_TYPE_DIRECTORY,
339 G_FILE_TYPE_SYMBOLIC_LINK,
340 G_FILE_TYPE_SPECIAL, /* socket, fifo, blockdev, chardev */
341 G_FILE_TYPE_SHORTCUT,
342 G_FILE_TYPE_MOUNTABLE
347 * GFilesystemPreviewType:
348 * @G_FILESYSTEM_PREVIEW_TYPE_IF_ALWAYS: Only preview files if user has explicitly requested it.
349 * @G_FILESYSTEM_PREVIEW_TYPE_IF_LOCAL: Preview files if user has requested preview of "local" files.
350 * @G_FILESYSTEM_PREVIEW_TYPE_NEVER: Never preview files.
352 * Indicates a hint from the file system whether files should be
353 * previewed in a file manager. Returned as the value of the key
354 * #G_FILE_ATTRIBUTE_FILESYSTEM_USE_PREVIEW.
357 G_FILESYSTEM_PREVIEW_TYPE_IF_ALWAYS = 0,
358 G_FILESYSTEM_PREVIEW_TYPE_IF_LOCAL,
359 G_FILESYSTEM_PREVIEW_TYPE_NEVER
360 } GFilesystemPreviewType;
365 * @G_FILE_MONITOR_EVENT_CHANGED: a file changed.
366 * @G_FILE_MONITOR_EVENT_CHANGES_DONE_HINT: a hint that this was probably the last change in a set of changes.
367 * @G_FILE_MONITOR_EVENT_DELETED: a file was deleted.
368 * @G_FILE_MONITOR_EVENT_CREATED: a file was created.
369 * @G_FILE_MONITOR_EVENT_ATTRIBUTE_CHANGED: a file attribute was changed.
370 * @G_FILE_MONITOR_EVENT_PRE_UNMOUNT: the file location will soon be unmounted.
371 * @G_FILE_MONITOR_EVENT_UNMOUNTED: the file location was unmounted.
372 * @G_FILE_MONITOR_EVENT_MOVED: the file was moved.
374 * Specifies what type of event a monitor event is.
377 G_FILE_MONITOR_EVENT_CHANGED,
378 G_FILE_MONITOR_EVENT_CHANGES_DONE_HINT,
379 G_FILE_MONITOR_EVENT_DELETED,
380 G_FILE_MONITOR_EVENT_CREATED,
381 G_FILE_MONITOR_EVENT_ATTRIBUTE_CHANGED,
382 G_FILE_MONITOR_EVENT_PRE_UNMOUNT,
383 G_FILE_MONITOR_EVENT_UNMOUNTED,
384 G_FILE_MONITOR_EVENT_MOVED
388 /* This enumeration conflicts with GIOError in giochannel.h. However,
389 * that is only used as a return value in some deprecated functions.
390 * So, we reuse the same prefix for the enumeration values, but call
391 * the actual enumeration (which is rarely used) GIOErrorEnum.
395 * @G_IO_ERROR_FAILED: Generic error condition for when any operation fails.
396 * @G_IO_ERROR_NOT_FOUND: File not found error.
397 * @G_IO_ERROR_EXISTS: File already exists error.
398 * @G_IO_ERROR_IS_DIRECTORY: File is a directory error.
399 * @G_IO_ERROR_NOT_DIRECTORY: File is not a directory.
400 * @G_IO_ERROR_NOT_EMPTY: File is a directory that isn't empty.
401 * @G_IO_ERROR_NOT_REGULAR_FILE: File is not a regular file.
402 * @G_IO_ERROR_NOT_SYMBOLIC_LINK: File is not a symbolic link.
403 * @G_IO_ERROR_NOT_MOUNTABLE_FILE: File cannot be mounted.
404 * @G_IO_ERROR_FILENAME_TOO_LONG: Filename is too many characters.
405 * @G_IO_ERROR_INVALID_FILENAME: Filename is invalid or contains invalid characters.
406 * @G_IO_ERROR_TOO_MANY_LINKS: File contains too many symbolic links.
407 * @G_IO_ERROR_NO_SPACE: No space left on drive.
408 * @G_IO_ERROR_INVALID_ARGUMENT: Invalid argument.
409 * @G_IO_ERROR_PERMISSION_DENIED: Permission denied.
410 * @G_IO_ERROR_NOT_SUPPORTED: Operation not supported for the current backend.
411 * @G_IO_ERROR_NOT_MOUNTED: File isn't mounted.
412 * @G_IO_ERROR_ALREADY_MOUNTED: File is already mounted.
413 * @G_IO_ERROR_CLOSED: File was closed.
414 * @G_IO_ERROR_CANCELLED: Operation was cancelled. See #GCancellable.
415 * @G_IO_ERROR_PENDING: Operations are still pending.
416 * @G_IO_ERROR_READ_ONLY: File is read only.
417 * @G_IO_ERROR_CANT_CREATE_BACKUP: Backup couldn't be created.
418 * @G_IO_ERROR_WRONG_ETAG: File's Entity Tag was incorrect.
419 * @G_IO_ERROR_TIMED_OUT: Operation timed out.
420 * @G_IO_ERROR_WOULD_RECURSE: Operation would be recursive.
421 * @G_IO_ERROR_BUSY: File is busy.
422 * @G_IO_ERROR_WOULD_BLOCK: Operation would block.
423 * @G_IO_ERROR_HOST_NOT_FOUND: Host couldn't be found (remote operations).
424 * @G_IO_ERROR_WOULD_MERGE: Operation would merge files.
425 * @G_IO_ERROR_FAILED_HANDLED: Operation failed and a helper program has
426 * already interacted with the user. Do not display any error dialog.
427 * @G_IO_ERROR_TOO_MANY_OPEN_FILES: The current process has too many files
428 * open and can't open any more. Duplicate descriptors do count toward
429 * this limit. Since 2.20
430 * @G_IO_ERROR_NOT_INITIALIZED: The object has not been initialized. Since 2.22
431 * @G_IO_ERROR_ADDRESS_IN_USE: The requested address is already in use. Since 2.22
432 * @G_IO_ERROR_PARTIAL_INPUT: Need more input to finish operation. Since 2.24
433 * @G_IO_ERROR_INVALID_DATA: There input data was invalid. Since 2.24
434 * @G_IO_ERROR_DBUS_ERROR: A remote object generated an error that
435 * doesn't correspond to a locally registered #GError error
436 * domain. Use g_dbus_error_get_remote_error() to extract the D-Bus
437 * error name and g_dbus_error_strip_remote_error() to fix up the
438 * message so it matches what was received on the wire. Since 2.26.
440 * Error codes returned by GIO functions.
445 G_IO_ERROR_NOT_FOUND,
447 G_IO_ERROR_IS_DIRECTORY,
448 G_IO_ERROR_NOT_DIRECTORY,
449 G_IO_ERROR_NOT_EMPTY,
450 G_IO_ERROR_NOT_REGULAR_FILE,
451 G_IO_ERROR_NOT_SYMBOLIC_LINK,
452 G_IO_ERROR_NOT_MOUNTABLE_FILE,
453 G_IO_ERROR_FILENAME_TOO_LONG,
454 G_IO_ERROR_INVALID_FILENAME,
455 G_IO_ERROR_TOO_MANY_LINKS,
457 G_IO_ERROR_INVALID_ARGUMENT,
458 G_IO_ERROR_PERMISSION_DENIED,
459 G_IO_ERROR_NOT_SUPPORTED,
460 G_IO_ERROR_NOT_MOUNTED,
461 G_IO_ERROR_ALREADY_MOUNTED,
463 G_IO_ERROR_CANCELLED,
465 G_IO_ERROR_READ_ONLY,
466 G_IO_ERROR_CANT_CREATE_BACKUP,
467 G_IO_ERROR_WRONG_ETAG,
468 G_IO_ERROR_TIMED_OUT,
469 G_IO_ERROR_WOULD_RECURSE,
471 G_IO_ERROR_WOULD_BLOCK,
472 G_IO_ERROR_HOST_NOT_FOUND,
473 G_IO_ERROR_WOULD_MERGE,
474 G_IO_ERROR_FAILED_HANDLED,
475 G_IO_ERROR_TOO_MANY_OPEN_FILES,
476 G_IO_ERROR_NOT_INITIALIZED,
477 G_IO_ERROR_ADDRESS_IN_USE,
478 G_IO_ERROR_PARTIAL_INPUT,
479 G_IO_ERROR_INVALID_DATA,
480 G_IO_ERROR_DBUS_ERROR
486 * @G_ASK_PASSWORD_NEED_PASSWORD: operation requires a password.
487 * @G_ASK_PASSWORD_NEED_USERNAME: operation requires a username.
488 * @G_ASK_PASSWORD_NEED_DOMAIN: operation requires a domain.
489 * @G_ASK_PASSWORD_SAVING_SUPPORTED: operation supports saving settings.
490 * @G_ASK_PASSWORD_ANONYMOUS_SUPPORTED: operation supports anonymous users.
492 * #GAskPasswordFlags are used to request specific information from the
493 * user, or to notify the user of their choices in an authentication
497 G_ASK_PASSWORD_NEED_PASSWORD = (1 << 0),
498 G_ASK_PASSWORD_NEED_USERNAME = (1 << 1),
499 G_ASK_PASSWORD_NEED_DOMAIN = (1 << 2),
500 G_ASK_PASSWORD_SAVING_SUPPORTED = (1 << 3),
501 G_ASK_PASSWORD_ANONYMOUS_SUPPORTED = (1 << 4)
507 * @G_PASSWORD_SAVE_NEVER: never save a password.
508 * @G_PASSWORD_SAVE_FOR_SESSION: save a password for the session.
509 * @G_PASSWORD_SAVE_PERMANENTLY: save a password permanently.
511 * #GPasswordSave is used to indicate the lifespan of a saved password.
513 * #Gvfs stores passwords in the Gnome keyring when this flag allows it
514 * to, and later retrieves it again from there.
517 G_PASSWORD_SAVE_NEVER,
518 G_PASSWORD_SAVE_FOR_SESSION,
519 G_PASSWORD_SAVE_PERMANENTLY
524 * GMountOperationResult:
525 * @G_MOUNT_OPERATION_HANDLED: The request was fulfilled and the
526 * user specified data is now available
527 * @G_MOUNT_OPERATION_ABORTED: The user requested the mount operation
529 * @G_MOUNT_OPERATION_UNHANDLED: The request was unhandled (i.e. not
532 * #GMountOperationResult is returned as a result when a request for
533 * information is send by the mounting operation.
536 G_MOUNT_OPERATION_HANDLED,
537 G_MOUNT_OPERATION_ABORTED,
538 G_MOUNT_OPERATION_UNHANDLED
539 } GMountOperationResult;
543 * GOutputStreamSpliceFlags:
544 * @G_OUTPUT_STREAM_SPLICE_NONE: Do not close either stream.
545 * @G_OUTPUT_STREAM_SPLICE_CLOSE_SOURCE: Close the source stream after
547 * @G_OUTPUT_STREAM_SPLICE_CLOSE_TARGET: Close the target stream after
550 * GOutputStreamSpliceFlags determine how streams should be spliced.
553 G_OUTPUT_STREAM_SPLICE_NONE = 0,
554 G_OUTPUT_STREAM_SPLICE_CLOSE_SOURCE = (1 << 0),
555 G_OUTPUT_STREAM_SPLICE_CLOSE_TARGET = (1 << 1)
556 } GOutputStreamSpliceFlags;
561 * @G_EMBLEM_ORIGIN_UNKNOWN: Emblem of unknown origin
562 * @G_EMBLEM_ORIGIN_DEVICE: Emblem adds device-specific information
563 * @G_EMBLEM_ORIGIN_LIVEMETADATA: Emblem depicts live metadata, such as "readonly"
564 * @G_EMBLEM_ORIGIN_TAG: Emblem comes from a user-defined tag, e.g. set by nautilus (in the future)
566 * GEmblemOrigin is used to add information about the origin of the emblem
572 G_EMBLEM_ORIGIN_UNKNOWN,
573 G_EMBLEM_ORIGIN_DEVICE,
574 G_EMBLEM_ORIGIN_LIVEMETADATA,
580 * @G_RESOLVER_ERROR_NOT_FOUND: the requested name/address/service was not
582 * @G_RESOLVER_ERROR_TEMPORARY_FAILURE: the requested information could not
583 * be looked up due to a network error or similar problem
584 * @G_RESOLVER_ERROR_INTERNAL: unknown error
586 * An error code used with %G_RESOLVER_ERROR in a #GError returned
587 * from a #GResolver routine.
592 G_RESOLVER_ERROR_NOT_FOUND,
593 G_RESOLVER_ERROR_TEMPORARY_FAILURE,
594 G_RESOLVER_ERROR_INTERNAL
599 * @G_SOCKET_FAMILY_INVALID: no address family
600 * @G_SOCKET_FAMILY_IPV4: the IPv4 family
601 * @G_SOCKET_FAMILY_IPV6: the IPv6 family
602 * @G_SOCKET_FAMILY_UNIX: the UNIX domain family
604 * The protocol family of a #GSocketAddress. (These values are
605 * identical to the system defines %AF_INET, %AF_INET6 and %AF_UNIX,
611 G_SOCKET_FAMILY_INVALID,
612 #ifdef GLIB_SYSDEF_AF_UNIX
613 G_SOCKET_FAMILY_UNIX = GLIB_SYSDEF_AF_UNIX,
615 G_SOCKET_FAMILY_IPV4 = GLIB_SYSDEF_AF_INET,
616 G_SOCKET_FAMILY_IPV6 = GLIB_SYSDEF_AF_INET6
621 * @G_SOCKET_TYPE_INVALID: Type unknown or wrong
622 * @G_SOCKET_TYPE_STREAM: Reliable connection-based byte streams (e.g. TCP).
623 * @G_SOCKET_TYPE_DATAGRAM: Connectionless, unreliable datagram passing.
625 * @G_SOCKET_TYPE_SEQPACKET: Reliable connection-based passing of datagrams
626 * of fixed maximum length (e.g. SCTP).
628 * Flags used when creating a #GSocket. Some protocols may not implement
629 * all the socket types.
635 G_SOCKET_TYPE_INVALID,
636 G_SOCKET_TYPE_STREAM,
637 G_SOCKET_TYPE_DATAGRAM,
638 G_SOCKET_TYPE_SEQPACKET
643 * @G_SOCKET_MSG_NONE: No flags.
644 * @G_SOCKET_MSG_OOB: Request to send/receive out of band data.
645 * @G_SOCKET_MSG_PEEK: Read data from the socket without removing it from
647 * @G_SOCKET_MSG_DONTROUTE: Don't use a gateway to send out the packet,
648 * only send to hosts on directly connected networks.
650 * Flags used in g_socket_receive_message() and g_socket_send_message().
651 * The flags listed in the enum are some commonly available flags, but the
652 * values used for them are the same as on the platform, and any other flags
653 * are passed in/out as is. So to use a platform specific flag, just include
654 * the right system header and pass in the flag.
661 G_SOCKET_MSG_OOB = GLIB_SYSDEF_MSG_OOB,
662 G_SOCKET_MSG_PEEK = GLIB_SYSDEF_MSG_PEEK,
663 G_SOCKET_MSG_DONTROUTE = GLIB_SYSDEF_MSG_DONTROUTE
668 * @G_SOCKET_PROTOCOL_UNKNOWN: The protocol type is unknown
669 * @G_SOCKET_PROTOCOL_DEFAULT: The default protocol for the family/type
670 * @G_SOCKET_PROTOCOL_TCP: TCP over IP
671 * @G_SOCKET_PROTOCOL_UDP: UDP over IP
672 * @G_SOCKET_PROTOCOL_SCTP: SCTP over IP
674 * A protocol identifier is specified when creating a #GSocket, which is a
675 * family/type specific identifier, where 0 means the default protocol for
676 * the particular family/type.
678 * This enum contains a set of commonly available and used protocols. You
679 * can also pass any other identifiers handled by the platform in order to
680 * use protocols not listed here.
685 G_SOCKET_PROTOCOL_UNKNOWN = -1,
686 G_SOCKET_PROTOCOL_DEFAULT = 0,
687 G_SOCKET_PROTOCOL_TCP = 6,
688 G_SOCKET_PROTOCOL_UDP = 17,
689 G_SOCKET_PROTOCOL_SCTP = 132
693 * GZlibCompressorFormat:
694 * @G_ZLIB_COMPRESSOR_FORMAT_ZLIB: deflate compression with zlib header
695 * @G_ZLIB_COMPRESSOR_FORMAT_GZIP: gzip file format
696 * @G_ZLIB_COMPRESSOR_FORMAT_RAW: deflate compression with no header
698 * Used to select the type of data format to use for #GZlibDecompressor
699 * and #GZlibCompressor.
704 G_ZLIB_COMPRESSOR_FORMAT_ZLIB,
705 G_ZLIB_COMPRESSOR_FORMAT_GZIP,
706 G_ZLIB_COMPRESSOR_FORMAT_RAW
707 } GZlibCompressorFormat;
710 * GUnixSocketAddressType:
711 * @G_UNIX_SOCKET_ADDRESS_INVALID: invalid
712 * @G_UNIX_SOCKET_ADDRESS_ANONYMOUS: anonymous
713 * @G_UNIX_SOCKET_ADDRESS_PATH: a filesystem path
714 * @G_UNIX_SOCKET_ADDRESS_ABSTRACT: an abstract name
715 * @G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED: an abstract name, 0-padded
716 * to the full length of a unix socket name
718 * The type of name used by a #GUnixSocketAddress.
719 * %G_UNIX_SOCKET_ADDRESS_PATH indicates a traditional unix domain
720 * socket bound to a filesystem path. %G_UNIX_SOCKET_ADDRESS_ANONYMOUS
721 * indicates a socket not bound to any name (eg, a client-side socket,
722 * or a socket created with socketpair()).
724 * For abstract sockets, there are two incompatible ways of naming
725 * them: the man pages suggest using the entire <literal>struct
726 * sockaddr_un</literal> as the name, padding the unused parts of the
727 * %sun_path field with zeroes; this corresponds to
728 * %G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED. However, many programs
729 * instead just use a portion of %sun_path, and pass an appropriate
730 * smaller length to bind() or connect(). This is
731 * %G_UNIX_SOCKET_ADDRESS_ABSTRACT.
736 G_UNIX_SOCKET_ADDRESS_INVALID,
737 G_UNIX_SOCKET_ADDRESS_ANONYMOUS,
738 G_UNIX_SOCKET_ADDRESS_PATH,
739 G_UNIX_SOCKET_ADDRESS_ABSTRACT,
740 G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED
741 } GUnixSocketAddressType;
745 * @G_BUS_TYPE_STARTER: An alias for the message bus that activated the process, if any.
746 * @G_BUS_TYPE_NONE: Not a message bus.
747 * @G_BUS_TYPE_SYSTEM: The system-wide message bus.
748 * @G_BUS_TYPE_SESSION: The login session message bus.
750 * An enumeration for well-known message buses.
756 G_BUS_TYPE_STARTER = -1,
758 G_BUS_TYPE_SYSTEM = 1,
759 G_BUS_TYPE_SESSION = 2
763 * GBusNameOwnerFlags:
764 * @G_BUS_NAME_OWNER_FLAGS_NONE: No flags set.
765 * @G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT: Allow another message bus connection to claim the the name.
766 * @G_BUS_NAME_OWNER_FLAGS_REPLACE: If another message bus connection owns the name and have
767 * specified #G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT, then take the name from the other connection.
769 * Flags used in g_bus_own_name().
775 G_BUS_NAME_OWNER_FLAGS_NONE = 0, /*< nick=none >*/
776 G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT = (1<<0), /*< nick=allow-replacement >*/
777 G_BUS_NAME_OWNER_FLAGS_REPLACE = (1<<1) /*< nick=replace >*/
778 } GBusNameOwnerFlags;
781 * GBusNameWatcherFlags:
782 * @G_BUS_NAME_WATCHER_FLAGS_NONE: No flags set.
783 * @G_BUS_NAME_WATCHER_FLAGS_AUTO_START: If no-one owns the name when
784 * beginning to watch the name, ask the bus to launch an owner for the
787 * Flags used in g_bus_watch_name().
793 G_BUS_NAME_WATCHER_FLAGS_NONE = 0,
794 G_BUS_NAME_WATCHER_FLAGS_AUTO_START = (1<<0)
795 } GBusNameWatcherFlags;
799 * @G_DBUS_PROXY_FLAGS_NONE: No flags set.
800 * @G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES: Don't load properties.
801 * @G_DBUS_PROXY_FLAGS_DO_NOT_CONNECT_SIGNALS: Don't connect to signals on the remote object.
802 * @G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START: If not set and the proxy if for a well-known name,
803 * then request the bus to launch an owner for the name if no-one owns the name. This flag can
804 * only be used in proxies for well-known names.
806 * Flags used when constructing an instance of a #GDBusProxy derived class.
812 G_DBUS_PROXY_FLAGS_NONE = 0,
813 G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES = (1<<0),
814 G_DBUS_PROXY_FLAGS_DO_NOT_CONNECT_SIGNALS = (1<<1),
815 G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START = (1<<2)
820 * @G_DBUS_ERROR_FAILED:
821 * A generic error; "something went wrong" - see the error message for
823 * @G_DBUS_ERROR_NO_MEMORY:
824 * There was not enough memory to complete an operation.
825 * @G_DBUS_ERROR_SERVICE_UNKNOWN:
826 * The bus doesn't know how to launch a service to supply the bus name
828 * @G_DBUS_ERROR_NAME_HAS_NO_OWNER:
829 * The bus name you referenced doesn't exist (i.e. no application owns
831 * @G_DBUS_ERROR_NO_REPLY:
832 * No reply to a message expecting one, usually means a timeout occurred.
833 * @G_DBUS_ERROR_IO_ERROR:
834 * Something went wrong reading or writing to a socket, for example.
835 * @G_DBUS_ERROR_BAD_ADDRESS:
836 * A D-Bus bus address was malformed.
837 * @G_DBUS_ERROR_NOT_SUPPORTED:
838 * Requested operation isn't supported (like ENOSYS on UNIX).
839 * @G_DBUS_ERROR_LIMITS_EXCEEDED:
840 * Some limited resource is exhausted.
841 * @G_DBUS_ERROR_ACCESS_DENIED:
842 * Security restrictions don't allow doing what you're trying to do.
843 * @G_DBUS_ERROR_AUTH_FAILED:
844 * Authentication didn't work.
845 * @G_DBUS_ERROR_NO_SERVER:
846 * Unable to connect to server (probably caused by ECONNREFUSED on a
848 * @G_DBUS_ERROR_TIMEOUT:
849 * Certain timeout errors, possibly ETIMEDOUT on a socket. Note that
850 * %G_DBUS_ERROR_NO_REPLY is used for message reply timeouts. Warning:
851 * this is confusingly-named given that %G_DBUS_ERROR_TIMED_OUT also
852 * exists. We can't fix it for compatibility reasons so just be
854 * @G_DBUS_ERROR_NO_NETWORK:
855 * No network access (probably ENETUNREACH on a socket).
856 * @G_DBUS_ERROR_ADDRESS_IN_USE:
857 * Can't bind a socket since its address is in use (i.e. EADDRINUSE).
858 * @G_DBUS_ERROR_DISCONNECTED:
859 * The connection is disconnected and you're trying to use it.
860 * @G_DBUS_ERROR_INVALID_ARGS:
861 * Invalid arguments passed to a method call.
862 * @G_DBUS_ERROR_FILE_NOT_FOUND:
864 * @G_DBUS_ERROR_FILE_EXISTS:
865 * Existing file and the operation you're using does not silently overwrite.
866 * @G_DBUS_ERROR_UNKNOWN_METHOD:
867 * Method name you invoked isn't known by the object you invoked it on.
868 * @G_DBUS_ERROR_TIMED_OUT:
869 * Certain timeout errors, e.g. while starting a service. Warning: this is
870 * confusingly-named given that %G_DBUS_ERROR_TIMEOUT also exists. We
871 * can't fix it for compatibility reasons so just be careful.
872 * @G_DBUS_ERROR_MATCH_RULE_NOT_FOUND:
873 * Tried to remove or modify a match rule that didn't exist.
874 * @G_DBUS_ERROR_MATCH_RULE_INVALID:
875 * The match rule isn't syntactically valid.
876 * @G_DBUS_ERROR_SPAWN_EXEC_FAILED:
877 * While starting a new process, the exec() call failed.
878 * @G_DBUS_ERROR_SPAWN_FORK_FAILED:
879 * While starting a new process, the fork() call failed.
880 * @G_DBUS_ERROR_SPAWN_CHILD_EXITED:
881 * While starting a new process, the child exited with a status code.
882 * @G_DBUS_ERROR_SPAWN_CHILD_SIGNALED:
883 * While starting a new process, the child exited on a signal.
884 * @G_DBUS_ERROR_SPAWN_FAILED:
885 * While starting a new process, something went wrong.
886 * @G_DBUS_ERROR_SPAWN_SETUP_FAILED:
887 * We failed to setup the environment correctly.
888 * @G_DBUS_ERROR_SPAWN_CONFIG_INVALID:
889 * We failed to setup the config parser correctly.
890 * @G_DBUS_ERROR_SPAWN_SERVICE_INVALID:
891 * Bus name was not valid.
892 * @G_DBUS_ERROR_SPAWN_SERVICE_NOT_FOUND:
893 * Service file not found in system-services directory.
894 * @G_DBUS_ERROR_SPAWN_PERMISSIONS_INVALID:
895 * Permissions are incorrect on the setuid helper.
896 * @G_DBUS_ERROR_SPAWN_FILE_INVALID:
897 * Service file invalid (Name, User or Exec missing).
898 * @G_DBUS_ERROR_SPAWN_NO_MEMORY:
899 * Tried to get a UNIX process ID and it wasn't available.
900 * @G_DBUS_ERROR_UNIX_PROCESS_ID_UNKNOWN:
901 * Tried to get a UNIX process ID and it wasn't available.
902 * @G_DBUS_ERROR_INVALID_SIGNATURE:
903 * A type signature is not valid.
904 * @G_DBUS_ERROR_INVALID_FILE_CONTENT:
905 * A file contains invalid syntax or is otherwise broken.
906 * @G_DBUS_ERROR_SELINUX_SECURITY_CONTEXT_UNKNOWN:
907 * Asked for SELinux security context and it wasn't available.
908 * @G_DBUS_ERROR_ADT_AUDIT_DATA_UNKNOWN:
909 * Asked for ADT audit data and it wasn't available.
910 * @G_DBUS_ERROR_OBJECT_PATH_IN_USE:
911 * There's already an object with the requested object path.
913 * Error codes for the %G_DBUS_ERROR error domain.
919 /* Well-known errors in the org.freedesktop.DBus.Error namespace */
920 G_DBUS_ERROR_FAILED, /* org.freedesktop.DBus.Error.Failed */
921 G_DBUS_ERROR_NO_MEMORY, /* org.freedesktop.DBus.Error.NoMemory */
922 G_DBUS_ERROR_SERVICE_UNKNOWN, /* org.freedesktop.DBus.Error.ServiceUnknown */
923 G_DBUS_ERROR_NAME_HAS_NO_OWNER, /* org.freedesktop.DBus.Error.NameHasNoOwner */
924 G_DBUS_ERROR_NO_REPLY, /* org.freedesktop.DBus.Error.NoReply */
925 G_DBUS_ERROR_IO_ERROR, /* org.freedesktop.DBus.Error.IOError */
926 G_DBUS_ERROR_BAD_ADDRESS, /* org.freedesktop.DBus.Error.BadAddress */
927 G_DBUS_ERROR_NOT_SUPPORTED, /* org.freedesktop.DBus.Error.NotSupported */
928 G_DBUS_ERROR_LIMITS_EXCEEDED, /* org.freedesktop.DBus.Error.LimitsExceeded */
929 G_DBUS_ERROR_ACCESS_DENIED, /* org.freedesktop.DBus.Error.AccessDenied */
930 G_DBUS_ERROR_AUTH_FAILED, /* org.freedesktop.DBus.Error.AuthFailed */
931 G_DBUS_ERROR_NO_SERVER, /* org.freedesktop.DBus.Error.NoServer */
932 G_DBUS_ERROR_TIMEOUT, /* org.freedesktop.DBus.Error.Timeout */
933 G_DBUS_ERROR_NO_NETWORK, /* org.freedesktop.DBus.Error.NoNetwork */
934 G_DBUS_ERROR_ADDRESS_IN_USE, /* org.freedesktop.DBus.Error.AddressInUse */
935 G_DBUS_ERROR_DISCONNECTED, /* org.freedesktop.DBus.Error.Disconnected */
936 G_DBUS_ERROR_INVALID_ARGS, /* org.freedesktop.DBus.Error.InvalidArgs */
937 G_DBUS_ERROR_FILE_NOT_FOUND, /* org.freedesktop.DBus.Error.FileNotFound */
938 G_DBUS_ERROR_FILE_EXISTS, /* org.freedesktop.DBus.Error.FileExists */
939 G_DBUS_ERROR_UNKNOWN_METHOD, /* org.freedesktop.DBus.Error.UnknownMethod */
940 G_DBUS_ERROR_TIMED_OUT, /* org.freedesktop.DBus.Error.TimedOut */
941 G_DBUS_ERROR_MATCH_RULE_NOT_FOUND, /* org.freedesktop.DBus.Error.MatchRuleNotFound */
942 G_DBUS_ERROR_MATCH_RULE_INVALID, /* org.freedesktop.DBus.Error.MatchRuleInvalid */
943 G_DBUS_ERROR_SPAWN_EXEC_FAILED, /* org.freedesktop.DBus.Error.Spawn.ExecFailed */
944 G_DBUS_ERROR_SPAWN_FORK_FAILED, /* org.freedesktop.DBus.Error.Spawn.ForkFailed */
945 G_DBUS_ERROR_SPAWN_CHILD_EXITED, /* org.freedesktop.DBus.Error.Spawn.ChildExited */
946 G_DBUS_ERROR_SPAWN_CHILD_SIGNALED, /* org.freedesktop.DBus.Error.Spawn.ChildSignaled */
947 G_DBUS_ERROR_SPAWN_FAILED, /* org.freedesktop.DBus.Error.Spawn.Failed */
948 G_DBUS_ERROR_SPAWN_SETUP_FAILED, /* org.freedesktop.DBus.Error.Spawn.FailedToSetup */
949 G_DBUS_ERROR_SPAWN_CONFIG_INVALID, /* org.freedesktop.DBus.Error.Spawn.ConfigInvalid */
950 G_DBUS_ERROR_SPAWN_SERVICE_INVALID, /* org.freedesktop.DBus.Error.Spawn.ServiceNotValid */
951 G_DBUS_ERROR_SPAWN_SERVICE_NOT_FOUND, /* org.freedesktop.DBus.Error.Spawn.ServiceNotFound */
952 G_DBUS_ERROR_SPAWN_PERMISSIONS_INVALID, /* org.freedesktop.DBus.Error.Spawn.PermissionsInvalid */
953 G_DBUS_ERROR_SPAWN_FILE_INVALID, /* org.freedesktop.DBus.Error.Spawn.FileInvalid */
954 G_DBUS_ERROR_SPAWN_NO_MEMORY, /* org.freedesktop.DBus.Error.Spawn.NoMemory */
955 G_DBUS_ERROR_UNIX_PROCESS_ID_UNKNOWN, /* org.freedesktop.DBus.Error.UnixProcessIdUnknown */
956 G_DBUS_ERROR_INVALID_SIGNATURE, /* org.freedesktop.DBus.Error.InvalidSignature */
957 G_DBUS_ERROR_INVALID_FILE_CONTENT, /* org.freedesktop.DBus.Error.InvalidFileContent */
958 G_DBUS_ERROR_SELINUX_SECURITY_CONTEXT_UNKNOWN, /* org.freedesktop.DBus.Error.SELinuxSecurityContextUnknown */
959 G_DBUS_ERROR_ADT_AUDIT_DATA_UNKNOWN, /* org.freedesktop.DBus.Error.AdtAuditDataUnknown */
960 G_DBUS_ERROR_OBJECT_PATH_IN_USE /* org.freedesktop.DBus.Error.ObjectPathInUse */
962 /* Remember to update g_dbus_error_quark() in gdbuserror.c if you extend this enumeration */
965 * GDBusConnectionFlags:
966 * @G_DBUS_CONNECTION_FLAGS_NONE: No flags set.
967 * @G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_CLIENT: Perform authentication against server.
968 * @G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_SERVER: Perform authentication against client.
969 * @G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_ALLOW_ANONYMOUS: When
970 * authenticating as a server, allow the anonymous authentication
972 * @G_DBUS_CONNECTION_FLAGS_MESSAGE_BUS_CONNECTION: Pass this flag if connecting to a peer that is a
973 * message bus. This means that the Hello() method will be invoked as part of the connection setup.
974 * @G_DBUS_CONNECTION_FLAGS_DELAY_MESSAGE_PROCESSING: If set, processing of D-Bus messages is
975 * delayed until g_dbus_connection_start_message_processing() is called.
977 * Flags used when creating a new #GDBusConnection.
982 G_DBUS_CONNECTION_FLAGS_NONE = 0,
983 G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_CLIENT = (1<<0),
984 G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_SERVER = (1<<1),
985 G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_ALLOW_ANONYMOUS = (1<<2),
986 G_DBUS_CONNECTION_FLAGS_MESSAGE_BUS_CONNECTION = (1<<3),
987 G_DBUS_CONNECTION_FLAGS_DELAY_MESSAGE_PROCESSING = (1<<4)
988 } GDBusConnectionFlags;
991 * GDBusCapabilityFlags:
992 * @G_DBUS_CAPABILITY_FLAGS_NONE: No flags set.
993 * @G_DBUS_CAPABILITY_FLAGS_UNIX_FD_PASSING: The connection
994 * supports exchanging UNIX file descriptors with the remote peer.
996 * Capabilities negotiated with the remote peer.
1001 G_DBUS_CAPABILITY_FLAGS_NONE = 0,
1002 G_DBUS_CAPABILITY_FLAGS_UNIX_FD_PASSING = (1<<0)
1003 } GDBusCapabilityFlags;
1007 * @G_DBUS_CALL_FLAGS_NONE: No flags set.
1008 * @G_DBUS_CALL_FLAGS_NO_AUTO_START: The bus must not launch
1009 * an owner for the destination name in response to this method
1012 * Flags used in g_dbus_connection_call() and similar APIs.
1017 G_DBUS_CALL_FLAGS_NONE = 0,
1018 G_DBUS_CALL_FLAGS_NO_AUTO_START = (1<<0)
1023 * @G_DBUS_MESSAGE_TYPE_INVALID: Message is of invalid type.
1024 * @G_DBUS_MESSAGE_TYPE_METHOD_CALL: Method call.
1025 * @G_DBUS_MESSAGE_TYPE_METHOD_RETURN: Method reply.
1026 * @G_DBUS_MESSAGE_TYPE_ERROR: Error reply.
1027 * @G_DBUS_MESSAGE_TYPE_SIGNAL: Signal emission.
1029 * Message types used in #GDBusMessage.
1034 G_DBUS_MESSAGE_TYPE_INVALID,
1035 G_DBUS_MESSAGE_TYPE_METHOD_CALL,
1036 G_DBUS_MESSAGE_TYPE_METHOD_RETURN,
1037 G_DBUS_MESSAGE_TYPE_ERROR,
1038 G_DBUS_MESSAGE_TYPE_SIGNAL
1042 * GDBusMessageFlags:
1043 * @G_DBUS_MESSAGE_FLAGS_NONE: No flags set.
1044 * @G_DBUS_MESSAGE_FLAGS_NO_REPLY_EXPECTED: A reply is not expected.
1045 * @G_DBUS_MESSAGE_FLAGS_NO_AUTO_START: The bus must not launch an
1046 * owner for the destination name in response to this message.
1048 * Message flags used in #GDBusMessage.
1053 G_DBUS_MESSAGE_FLAGS_NONE = 0,
1054 G_DBUS_MESSAGE_FLAGS_NO_REPLY_EXPECTED = (1<<0),
1055 G_DBUS_MESSAGE_FLAGS_NO_AUTO_START = (1<<1)
1056 } GDBusMessageFlags;
1059 * GDBusMessageHeaderField:
1060 * @G_DBUS_MESSAGE_HEADER_FIELD_INVALID: Not a valid header field.
1061 * @G_DBUS_MESSAGE_HEADER_FIELD_PATH: The object path.
1062 * @G_DBUS_MESSAGE_HEADER_FIELD_INTERFACE: The interface name.
1063 * @G_DBUS_MESSAGE_HEADER_FIELD_MEMBER: The method or signal name.
1064 * @G_DBUS_MESSAGE_HEADER_FIELD_ERROR_NAME: The name of the error that occurred.
1065 * @G_DBUS_MESSAGE_HEADER_FIELD_REPLY_SERIAL: The serial number the message is a reply to.
1066 * @G_DBUS_MESSAGE_HEADER_FIELD_DESTINATION: The name the message is intended for.
1067 * @G_DBUS_MESSAGE_HEADER_FIELD_SENDER: Unique name of the sender of the message (filled in by the bus).
1068 * @G_DBUS_MESSAGE_HEADER_FIELD_SIGNATURE: The signature of the message body.
1069 * @G_DBUS_MESSAGE_HEADER_FIELD_NUM_UNIX_FDS: The number of UNIX file descriptors that accompany the message.
1071 * Header fields used in #GDBusMessage.
1076 G_DBUS_MESSAGE_HEADER_FIELD_INVALID,
1077 G_DBUS_MESSAGE_HEADER_FIELD_PATH,
1078 G_DBUS_MESSAGE_HEADER_FIELD_INTERFACE,
1079 G_DBUS_MESSAGE_HEADER_FIELD_MEMBER,
1080 G_DBUS_MESSAGE_HEADER_FIELD_ERROR_NAME,
1081 G_DBUS_MESSAGE_HEADER_FIELD_REPLY_SERIAL,
1082 G_DBUS_MESSAGE_HEADER_FIELD_DESTINATION,
1083 G_DBUS_MESSAGE_HEADER_FIELD_SENDER,
1084 G_DBUS_MESSAGE_HEADER_FIELD_SIGNATURE,
1085 G_DBUS_MESSAGE_HEADER_FIELD_NUM_UNIX_FDS
1086 } GDBusMessageHeaderField;
1089 * GDBusPropertyInfoFlags:
1090 * @G_DBUS_PROPERTY_INFO_FLAGS_NONE: No flags set.
1091 * @G_DBUS_PROPERTY_INFO_FLAGS_READABLE: Property is readable.
1092 * @G_DBUS_PROPERTY_INFO_FLAGS_WRITABLE: Property is writable.
1094 * Flags describing the access control of a D-Bus property.
1100 G_DBUS_PROPERTY_INFO_FLAGS_NONE = 0,
1101 G_DBUS_PROPERTY_INFO_FLAGS_READABLE = (1<<0),
1102 G_DBUS_PROPERTY_INFO_FLAGS_WRITABLE = (1<<1)
1103 } GDBusPropertyInfoFlags;
1106 * GDBusSubtreeFlags:
1107 * @G_DBUS_SUBTREE_FLAGS_NONE: No flags set.
1108 * @G_DBUS_SUBTREE_FLAGS_DISPATCH_TO_UNENUMERATED_NODES: Method calls to objects not in the enumerated range
1109 * will still be dispatched. This is useful if you want
1110 * to dynamically spawn objects in the subtree.
1112 * Flags passed to g_dbus_connection_register_subtree().
1118 G_DBUS_SUBTREE_FLAGS_NONE = 0,
1119 G_DBUS_SUBTREE_FLAGS_DISPATCH_TO_UNENUMERATED_NODES = (1<<0)
1120 } GDBusSubtreeFlags;
1124 * @G_DBUS_SERVER_FLAGS_NONE: No flags set.
1125 * @G_DBUS_SERVER_FLAGS_RUN_IN_THREAD: All #GDBusServer::new-connection
1126 * signals will run in separated dedicated threads (see signal for
1128 * @G_DBUS_SERVER_FLAGS_AUTHENTICATION_ALLOW_ANONYMOUS: Allow the anonymous
1129 * authentication method.
1131 * Flags used when creating a #GDBusServer.
1137 G_DBUS_SERVER_FLAGS_NONE = 0,
1138 G_DBUS_SERVER_FLAGS_RUN_IN_THREAD = (1<<0),
1139 G_DBUS_SERVER_FLAGS_AUTHENTICATION_ALLOW_ANONYMOUS = (1<<1)
1144 * @G_DBUS_SIGNAL_FLAGS_NONE: No flags set.
1146 * Flags used when subscribing to signals via g_dbus_connection_signal_subscribe().
1150 typedef enum /*< flags >*/
1152 G_DBUS_SIGNAL_FLAGS_NONE = 0
1156 * GDBusSendMessageFlags:
1157 * @G_DBUS_SEND_MESSAGE_FLAGS_NONE: No flags set.
1158 * @G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL: Do not automatically
1159 * assign a serial number from the #GDBusConnection object when
1160 * sending a message.
1162 * Flags used when sending #GDBusMessage<!-- -->s on a #GDBusConnection.
1168 G_DBUS_SEND_MESSAGE_FLAGS_NONE = 0,
1169 G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL = (1<<0)
1170 } GDBusSendMessageFlags;
1174 * @G_CREDENTIALS_TYPE_INVALID: Indicates an invalid native credential type.
1175 * @G_CREDENTIALS_TYPE_LINUX_UCRED: The native credentials type is a <type>struct ucred</type>.
1177 * Enumeration describing different kinds of native credential types.
1183 G_CREDENTIALS_TYPE_INVALID,
1184 G_CREDENTIALS_TYPE_LINUX_UCRED
1188 * GDBusMessageByteOrder:
1189 * @G_DBUS_MESSAGE_BYTE_ORDER_BIG_ENDIAN: The byte order is big endian.
1190 * @G_DBUS_MESSAGE_BYTE_ORDER_LITTLE_ENDIAN: The byte order is little endian.
1192 * Enumeration used to describe the byte order of a D-Bus message.
1198 G_DBUS_MESSAGE_BYTE_ORDER_BIG_ENDIAN = 'B',
1199 G_DBUS_MESSAGE_BYTE_ORDER_LITTLE_ENDIAN = 'l'
1200 } GDBusMessageByteOrder;
1204 #endif /* __GIO_ENUMS_H__ */