Fix PR 21218: GDB dumps core when escaping newline in multi-line command
[external/binutils.git] / gdb / top.c
1 /* Top level stuff for GDB, the GNU debugger.
2
3    Copyright (C) 1986-2017 Free Software Foundation, Inc.
4
5    This file is part of GDB.
6
7    This program is free software; you can redistribute it and/or modify
8    it under the terms of the GNU General Public License as published by
9    the Free Software Foundation; either version 3 of the License, or
10    (at your option) any later version.
11
12    This program is distributed in the hope that it will be useful,
13    but WITHOUT ANY WARRANTY; without even the implied warranty of
14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15    GNU General Public License for more details.
16
17    You should have received a copy of the GNU General Public License
18    along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
19
20 #include "defs.h"
21 #include "gdbcmd.h"
22 #include "cli/cli-cmds.h"
23 #include "cli/cli-script.h"
24 #include "cli/cli-setshow.h"
25 #include "cli/cli-decode.h"
26 #include "symtab.h"
27 #include "inferior.h"
28 #include "infrun.h"
29 #include <signal.h>
30 #include "target.h"
31 #include "target-dcache.h"
32 #include "breakpoint.h"
33 #include "gdbtypes.h"
34 #include "expression.h"
35 #include "value.h"
36 #include "language.h"
37 #include "terminal.h"           /* For job_control.  */
38 #include "annotate.h"
39 #include "completer.h"
40 #include "top.h"
41 #include "version.h"
42 #include "serial.h"
43 #include "doublest.h"
44 #include "main.h"
45 #include "event-loop.h"
46 #include "gdbthread.h"
47 #include "extension.h"
48 #include "interps.h"
49 #include "observer.h"
50 #include "maint.h"
51 #include "filenames.h"
52 #include "frame.h"
53 #include "buffer.h"
54 #include "gdb_select.h"
55
56 /* readline include files.  */
57 #include "readline/readline.h"
58 #include "readline/history.h"
59
60 /* readline defines this.  */
61 #undef savestring
62
63 #include <sys/types.h>
64
65 #include "event-top.h"
66 #include <sys/stat.h>
67 #include <ctype.h>
68 #include "ui-out.h"
69 #include "cli-out.h"
70 #include "tracepoint.h"
71 #include "inf-loop.h"
72
73 #if defined(TUI)
74 # include "tui/tui.h"
75 #endif
76
77 #ifndef O_NOCTTY
78 # define O_NOCTTY 0
79 #endif
80
81 extern void initialize_all_files (void);
82
83 #define PROMPT(X) the_prompts.prompt_stack[the_prompts.top + X].prompt
84 #define PREFIX(X) the_prompts.prompt_stack[the_prompts.top + X].prefix
85 #define SUFFIX(X) the_prompts.prompt_stack[the_prompts.top + X].suffix
86
87 /* Default command line prompt.  This is overriden in some configs.  */
88
89 #ifndef DEFAULT_PROMPT
90 #define DEFAULT_PROMPT  "(gdb) "
91 #endif
92
93 /* Generate a function that exports a pointer to a field of the
94    current UI.  */
95
96 #define gen_ret_current_ui_field_ptr(type, name)        \
97 type *                                                  \
98 current_ui_## name ## _ptr (void)                       \
99 {                                                       \
100   return &current_ui->m_ ## name;               \
101 }
102
103 gen_ret_current_ui_field_ptr (struct ui_file *, gdb_stdout)
104 gen_ret_current_ui_field_ptr (struct ui_file *, gdb_stdin)
105 gen_ret_current_ui_field_ptr (struct ui_file *, gdb_stderr)
106 gen_ret_current_ui_field_ptr (struct ui_file *, gdb_stdlog)
107 gen_ret_current_ui_field_ptr (struct ui_out *, current_uiout)
108
109 /* Initialization file name for gdb.  This is host-dependent.  */
110
111 const char gdbinit[] = GDBINIT;
112
113 int inhibit_gdbinit = 0;
114
115 extern char lang_frame_mismatch_warn[];         /* language.c */
116
117 /* Flag for whether we want to confirm potentially dangerous
118    operations.  Default is yes.  */
119
120 int confirm = 1;
121
122 static void
123 show_confirm (struct ui_file *file, int from_tty,
124               struct cmd_list_element *c, const char *value)
125 {
126   fprintf_filtered (file, _("Whether to confirm potentially "
127                             "dangerous operations is %s.\n"),
128                     value);
129 }
130
131 /* Flag to indicate whether a user defined command is currently running.  */
132
133 int in_user_command;
134
135 /* Current working directory.  */
136
137 char *current_directory;
138
139 /* The directory name is actually stored here (usually).  */
140 char gdb_dirbuf[1024];
141
142 /* The last command line executed on the console.  Used for command
143    repetitions.  */
144 char *saved_command_line;
145
146 /* Nonzero if the current command is modified by "server ".  This
147    affects things like recording into the command history, commands
148    repeating on RETURN, etc.  This is so a user interface (emacs, GUI,
149    whatever) can issue its own commands and also send along commands
150    from the user, and have the user not notice that the user interface
151    is issuing commands too.  */
152 int server_command;
153
154 /* Timeout limit for response from target.  */
155
156 /* The default value has been changed many times over the years.  It 
157    was originally 5 seconds.  But that was thought to be a long time 
158    to sit and wait, so it was changed to 2 seconds.  That was thought
159    to be plenty unless the connection was going through some terminal 
160    server or multiplexer or other form of hairy serial connection.
161
162    In mid-1996, remote_timeout was moved from remote.c to top.c and 
163    it began being used in other remote-* targets.  It appears that the
164    default was changed to 20 seconds at that time, perhaps because the
165    Renesas E7000 ICE didn't always respond in a timely manner.
166
167    But if 5 seconds is a long time to sit and wait for retransmissions,
168    20 seconds is far worse.  This demonstrates the difficulty of using 
169    a single variable for all protocol timeouts.
170
171    As remote.c is used much more than remote-e7000.c, it was changed 
172    back to 2 seconds in 1999.  */
173
174 int remote_timeout = 2;
175
176 /* Non-zero tells remote* modules to output debugging info.  */
177
178 int remote_debug = 0;
179
180 /* Sbrk location on entry to main.  Used for statistics only.  */
181 #ifdef HAVE_SBRK
182 char *lim_at_start;
183 #endif
184
185 /* Hooks for alternate command interfaces.  */
186
187 /* This hook is called from within gdb's many mini-event loops which
188    could steal control from a real user interface's event loop.  It
189    returns non-zero if the user is requesting a detach, zero
190    otherwise.  */
191
192 int (*deprecated_ui_loop_hook) (int);
193
194
195 /* Called from print_frame_info to list the line we stopped in.  */
196
197 void (*deprecated_print_frame_info_listing_hook) (struct symtab * s, 
198                                                   int line,
199                                                   int stopline, 
200                                                   int noerror);
201 /* Replaces most of query.  */
202
203 int (*deprecated_query_hook) (const char *, va_list);
204
205 /* Replaces most of warning.  */
206
207 void (*deprecated_warning_hook) (const char *, va_list);
208
209 /* These three functions support getting lines of text from the user.
210    They are used in sequence.  First deprecated_readline_begin_hook is
211    called with a text string that might be (for example) a message for
212    the user to type in a sequence of commands to be executed at a
213    breakpoint.  If this function calls back to a GUI, it might take
214    this opportunity to pop up a text interaction window with this
215    message.  Next, deprecated_readline_hook is called with a prompt
216    that is emitted prior to collecting the user input.  It can be
217    called multiple times.  Finally, deprecated_readline_end_hook is
218    called to notify the GUI that we are done with the interaction
219    window and it can close it.  */
220
221 void (*deprecated_readline_begin_hook) (char *, ...);
222 char *(*deprecated_readline_hook) (const char *);
223 void (*deprecated_readline_end_hook) (void);
224
225 /* Called as appropriate to notify the interface that we have attached
226    to or detached from an already running process.  */
227
228 void (*deprecated_attach_hook) (void);
229 void (*deprecated_detach_hook) (void);
230
231 /* Called during long calculations to allow GUI to repair window
232    damage, and to check for stop buttons, etc...  */
233
234 void (*deprecated_interactive_hook) (void);
235
236 /* Called when going to wait for the target.  Usually allows the GUI
237    to run while waiting for target events.  */
238
239 ptid_t (*deprecated_target_wait_hook) (ptid_t ptid,
240                                        struct target_waitstatus *status,
241                                        int options);
242
243 /* Used by UI as a wrapper around command execution.  May do various
244    things like enabling/disabling buttons, etc...  */
245
246 void (*deprecated_call_command_hook) (struct cmd_list_element * c, 
247                                       char *cmd, int from_tty);
248
249 /* Called when the current thread changes.  Argument is thread id.  */
250
251 void (*deprecated_context_hook) (int id);
252
253 /* The highest UI number ever assigned.  */
254 static int highest_ui_num;
255
256 /* See top.h.  */
257
258 struct ui *
259 new_ui (FILE *instream, FILE *outstream, FILE *errstream)
260 {
261   struct ui *ui;
262
263   ui = XCNEW (struct ui);
264
265   ui->num = ++highest_ui_num;
266   ui->stdin_stream = instream;
267   ui->instream = instream;
268   ui->outstream = outstream;
269   ui->errstream = errstream;
270
271   ui->input_fd = fileno (ui->instream);
272
273   ui->input_interactive_p = ISATTY (ui->instream);
274
275   ui->m_gdb_stdin = new stdio_file (ui->instream);
276   ui->m_gdb_stdout = new stdio_file (ui->outstream);
277   ui->m_gdb_stderr = new stderr_file (ui->errstream);
278   ui->m_gdb_stdlog = ui->m_gdb_stderr;
279
280   ui->prompt_state = PROMPT_NEEDED;
281
282   if (ui_list == NULL)
283     ui_list = ui;
284   else
285     {
286       struct ui *last;
287
288       for (last = ui_list; last->next != NULL; last = last->next)
289         ;
290       last->next = ui;
291     }
292
293   return ui;
294 }
295
296 static void
297 free_ui (struct ui *ui)
298 {
299   delete ui->m_gdb_stdin;
300   delete ui->m_gdb_stdout;
301   delete ui->m_gdb_stderr;
302
303   xfree (ui);
304 }
305
306 void
307 delete_ui (struct ui *todel)
308 {
309   struct ui *ui, *uiprev;
310
311   uiprev = NULL;
312
313   for (ui = ui_list; ui != NULL; uiprev = ui, ui = ui->next)
314     if (ui == todel)
315       break;
316
317   gdb_assert (ui != NULL);
318
319   if (uiprev != NULL)
320     uiprev->next = ui->next;
321   else
322     ui_list = ui->next;
323
324   free_ui (ui);
325 }
326
327 /* Cleanup that deletes a UI.  */
328
329 static void
330 delete_ui_cleanup (void *void_ui)
331 {
332   struct ui *ui = (struct ui *) void_ui;
333
334   delete_ui (ui);
335 }
336
337 /* See top.h.  */
338
339 struct cleanup *
340 make_delete_ui_cleanup (struct ui *ui)
341 {
342   return make_cleanup (delete_ui_cleanup, ui);
343 }
344
345 /* Open file named NAME for read/write, making sure not to make it the
346    controlling terminal.  */
347
348 static FILE *
349 open_terminal_stream (const char *name)
350 {
351   int fd;
352
353   fd = open (name, O_RDWR | O_NOCTTY);
354   if (fd < 0)
355     perror_with_name  (_("opening terminal failed"));
356
357   return fdopen (fd, "w+");
358 }
359
360 /* Implementation of the "new-ui" command.  */
361
362 static void
363 new_ui_command (char *args, int from_tty)
364 {
365   struct ui *ui;
366   struct interp *interp;
367   FILE *stream[3] = { NULL, NULL, NULL };
368   int i;
369   int res;
370   int argc;
371   char **argv;
372   const char *interpreter_name;
373   const char *tty_name;
374   struct cleanup *success_chain;
375   struct cleanup *failure_chain;
376
377   dont_repeat ();
378
379   argv = gdb_buildargv (args);
380   success_chain = make_cleanup_freeargv (argv);
381   argc = countargv (argv);
382
383   if (argc < 2)
384     error (_("usage: new-ui <interpreter> <tty>"));
385
386   interpreter_name = argv[0];
387   tty_name = argv[1];
388
389   {
390     scoped_restore save_ui = make_scoped_restore (&current_ui);
391
392     failure_chain = make_cleanup (null_cleanup, NULL);
393
394     /* Open specified terminal, once for each of
395        stdin/stdout/stderr.  */
396     for (i = 0; i < 3; i++)
397       {
398         stream[i] = open_terminal_stream (tty_name);
399         make_cleanup_fclose (stream[i]);
400       }
401
402     ui = new_ui (stream[0], stream[1], stream[2]);
403     make_cleanup (delete_ui_cleanup, ui);
404
405     ui->async = 1;
406
407     current_ui = ui;
408
409     set_top_level_interpreter (interpreter_name);
410
411     interp_pre_command_loop (top_level_interpreter ());
412
413     discard_cleanups (failure_chain);
414
415     /* This restores the previous UI and frees argv.  */
416     do_cleanups (success_chain);
417   }
418
419   printf_unfiltered ("New UI allocated\n");
420 }
421
422 /* Handler for SIGHUP.  */
423
424 #ifdef SIGHUP
425 /* NOTE 1999-04-29: This function will be static again, once we modify
426    gdb to use the event loop as the default command loop and we merge
427    event-top.c into this file, top.c.  */
428 /* static */ void
429 quit_cover (void)
430 {
431   /* Stop asking user for confirmation --- we're exiting.  This
432      prevents asking the user dumb questions.  */
433   confirm = 0;
434   quit_command ((char *) 0, 0);
435 }
436 #endif /* defined SIGHUP */
437 \f
438 /* Line number we are currently in, in a file which is being sourced.  */
439 /* NOTE 1999-04-29: This variable will be static again, once we modify
440    gdb to use the event loop as the default command loop and we merge
441    event-top.c into this file, top.c.  */
442 /* static */ int source_line_number;
443
444 /* Name of the file we are sourcing.  */
445 /* NOTE 1999-04-29: This variable will be static again, once we modify
446    gdb to use the event loop as the default command loop and we merge
447    event-top.c into this file, top.c.  */
448 /* static */ const char *source_file_name;
449
450 /* Clean up on error during a "source" command (or execution of a
451    user-defined command).  */
452
453 void
454 do_restore_instream_cleanup (void *stream)
455 {
456   struct ui *ui = current_ui;
457
458   /* Restore the previous input stream.  */
459   ui->instream = (FILE *) stream;
460 }
461
462 /* Read commands from STREAM.  */
463 void
464 read_command_file (FILE *stream)
465 {
466   struct ui *ui = current_ui;
467   struct cleanup *cleanups;
468
469   cleanups = make_cleanup (do_restore_instream_cleanup, ui->instream);
470   ui->instream = stream;
471
472   /* Read commands from `instream' and execute them until end of file
473      or error reading instream.  */
474
475   while (ui->instream != NULL && !feof (ui->instream))
476     {
477       char *command;
478
479       /* Get a command-line.  This calls the readline package.  */
480       command = command_line_input (NULL, 0, NULL);
481       if (command == NULL)
482         break;
483       command_handler (command);
484     }
485
486   do_cleanups (cleanups);
487 }
488 \f
489 void (*pre_init_ui_hook) (void);
490
491 #ifdef __MSDOS__
492 static void
493 do_chdir_cleanup (void *old_dir)
494 {
495   chdir ((const char *) old_dir);
496   xfree (old_dir);
497 }
498 #endif
499
500 struct cleanup *
501 prepare_execute_command (void)
502 {
503   struct value *mark;
504   struct cleanup *cleanup;
505
506   mark = value_mark ();
507   cleanup = make_cleanup_value_free_to_mark (mark);
508
509   /* With multiple threads running while the one we're examining is
510      stopped, the dcache can get stale without us being able to detect
511      it.  For the duration of the command, though, use the dcache to
512      help things like backtrace.  */
513   if (non_stop)
514     target_dcache_invalidate ();
515
516   return cleanup;
517 }
518
519 /* Tell the user if the language has changed (except first time) after
520    executing a command.  */
521
522 void
523 check_frame_language_change (void)
524 {
525   static int warned = 0;
526   struct frame_info *frame;
527
528   /* First make sure that a new frame has been selected, in case the
529      command or the hooks changed the program state.  */
530   frame = deprecated_safe_get_selected_frame ();
531   if (current_language != expected_language)
532     {
533       if (language_mode == language_mode_auto && info_verbose)
534         {
535           language_info (1);    /* Print what changed.  */
536         }
537       warned = 0;
538     }
539
540   /* Warn the user if the working language does not match the language
541      of the current frame.  Only warn the user if we are actually
542      running the program, i.e. there is a stack.  */
543   /* FIXME: This should be cacheing the frame and only running when
544      the frame changes.  */
545
546   if (has_stack_frames ())
547     {
548       enum language flang;
549
550       flang = get_frame_language (frame);
551       if (!warned
552           && flang != language_unknown
553           && flang != current_language->la_language)
554         {
555           printf_filtered ("%s\n", lang_frame_mismatch_warn);
556           warned = 1;
557         }
558     }
559 }
560
561 /* See top.h.  */
562
563 void
564 wait_sync_command_done (void)
565 {
566   /* Processing events may change the current UI.  */
567   scoped_restore save_ui = make_scoped_restore (&current_ui);
568   struct ui *ui = current_ui;
569
570   while (gdb_do_one_event () >= 0)
571     if (ui->prompt_state != PROMPT_BLOCKED)
572       break;
573 }
574
575 /* See top.h.  */
576
577 void
578 maybe_wait_sync_command_done (int was_sync)
579 {
580   /* If the interpreter is in sync mode (we're running a user
581      command's list, running command hooks or similars), and we
582      just ran a synchronous command that started the target, wait
583      for that command to end.  */
584   if (!current_ui->async
585       && !was_sync
586       && current_ui->prompt_state == PROMPT_BLOCKED)
587     wait_sync_command_done ();
588 }
589
590 /* Execute the line P as a command, in the current user context.
591    Pass FROM_TTY as second argument to the defining function.  */
592
593 void
594 execute_command (char *p, int from_tty)
595 {
596   struct cleanup *cleanup_if_error, *cleanup;
597   struct cmd_list_element *c;
598   char *line;
599
600   cleanup_if_error = make_bpstat_clear_actions_cleanup ();
601   cleanup = prepare_execute_command ();
602
603   /* Force cleanup of any alloca areas if using C alloca instead of
604      a builtin alloca.  */
605   alloca (0);
606
607   /* This can happen when command_line_input hits end of file.  */
608   if (p == NULL)
609     {
610       do_cleanups (cleanup);
611       discard_cleanups (cleanup_if_error);
612       return;
613     }
614
615   target_log_command (p);
616
617   while (*p == ' ' || *p == '\t')
618     p++;
619   if (*p)
620     {
621       const char *cmd = p;
622       char *arg;
623       int was_sync = current_ui->prompt_state == PROMPT_BLOCKED;
624
625       line = p;
626
627       /* If trace-commands is set then this will print this command.  */
628       print_command_trace (p);
629
630       c = lookup_cmd (&cmd, cmdlist, "", 0, 1);
631       p = (char *) cmd;
632
633       /* Pass null arg rather than an empty one.  */
634       arg = *p ? p : 0;
635
636       /* FIXME: cagney/2002-02-02: The c->type test is pretty dodgy
637          while the is_complete_command(cfunc) test is just plain
638          bogus.  They should both be replaced by a test of the form
639          c->strip_trailing_white_space_p.  */
640       /* NOTE: cagney/2002-02-02: The function.cfunc in the below
641          can't be replaced with func.  This is because it is the
642          cfunc, and not the func, that has the value that the
643          is_complete_command hack is testing for.  */
644       /* Clear off trailing whitespace, except for set and complete
645          command.  */
646       if (arg
647           && c->type != set_cmd
648           && !is_complete_command (c))
649         {
650           p = arg + strlen (arg) - 1;
651           while (p >= arg && (*p == ' ' || *p == '\t'))
652             p--;
653           *(p + 1) = '\0';
654         }
655
656       /* If this command has been pre-hooked, run the hook first.  */
657       execute_cmd_pre_hook (c);
658
659       if (c->deprecated_warn_user)
660         deprecated_cmd_warning (line);
661
662       /* c->user_commands would be NULL in the case of a python command.  */
663       if (c->theclass == class_user && c->user_commands)
664         execute_user_command (c, arg);
665       else if (c->type == set_cmd)
666         do_set_command (arg, from_tty, c);
667       else if (c->type == show_cmd)
668         do_show_command (arg, from_tty, c);
669       else if (!cmd_func_p (c))
670         error (_("That is not a command, just a help topic."));
671       else if (deprecated_call_command_hook)
672         deprecated_call_command_hook (c, arg, from_tty);
673       else
674         cmd_func (c, arg, from_tty);
675
676       maybe_wait_sync_command_done (was_sync);
677
678       /* If this command has been post-hooked, run the hook last.  */
679       execute_cmd_post_hook (c);
680
681     }
682
683   check_frame_language_change ();
684
685   do_cleanups (cleanup);
686   discard_cleanups (cleanup_if_error);
687 }
688
689 /* Run execute_command for P and FROM_TTY.  Capture its output into the
690    returned string, do not display it to the screen.  BATCH_FLAG will be
691    temporarily set to true.  */
692
693 std::string
694 execute_command_to_string (char *p, int from_tty)
695 {
696   struct cleanup *cleanup;
697
698   /* GDB_STDOUT should be better already restored during these
699      restoration callbacks.  */
700   cleanup = set_batch_flag_and_make_cleanup_restore_page_info ();
701
702   scoped_restore save_async = make_scoped_restore (&current_ui->async, 0);
703
704   string_file str_file;
705
706   current_uiout->redirect (&str_file);
707   make_cleanup_ui_out_redirect_pop (current_uiout);
708
709   scoped_restore save_stdout
710     = make_scoped_restore (&gdb_stdout, &str_file);
711   scoped_restore save_stderr
712     = make_scoped_restore (&gdb_stderr, &str_file);
713   scoped_restore save_stdlog
714     = make_scoped_restore (&gdb_stdlog, &str_file);
715   scoped_restore save_stdtarg
716     = make_scoped_restore (&gdb_stdtarg, &str_file);
717   scoped_restore save_stdtargerr
718     = make_scoped_restore (&gdb_stdtargerr, &str_file);
719
720   execute_command (p, from_tty);
721
722   do_cleanups (cleanup);
723
724   return std::move (str_file.string ());
725 }
726
727 \f
728 /* When nonzero, cause dont_repeat to do nothing.  This should only be
729    set via prevent_dont_repeat.  */
730
731 static int suppress_dont_repeat = 0;
732
733 /* Commands call this if they do not want to be repeated by null lines.  */
734
735 void
736 dont_repeat (void)
737 {
738   struct ui *ui = current_ui;
739
740   if (suppress_dont_repeat || server_command)
741     return;
742
743   /* If we aren't reading from standard input, we are saving the last
744      thing read from stdin in line and don't want to delete it.  Null
745      lines won't repeat here in any case.  */
746   if (ui->instream == ui->stdin_stream)
747     *saved_command_line = 0;
748 }
749
750 /* Prevent dont_repeat from working, and return a cleanup that
751    restores the previous state.  */
752
753 scoped_restore_tmpl<int>
754 prevent_dont_repeat (void)
755 {
756   return make_scoped_restore (&suppress_dont_repeat, 1);
757 }
758
759 \f
760 /* Read a line from the stream "instream" without command line editing.
761
762    It prints PROMPT once at the start.
763    Action is compatible with "readline", e.g. space for the result is
764    malloc'd and should be freed by the caller.
765
766    A NULL return means end of file.  */
767
768 static char *
769 gdb_readline_no_editing (const char *prompt)
770 {
771   struct buffer line_buffer;
772   struct ui *ui = current_ui;
773   /* Read from stdin if we are executing a user defined command.  This
774      is the right thing for prompt_for_continue, at least.  */
775   FILE *stream = ui->instream != NULL ? ui->instream : stdin;
776   int fd = fileno (stream);
777
778   buffer_init (&line_buffer);
779
780   if (prompt != NULL)
781     {
782       /* Don't use a _filtered function here.  It causes the assumed
783          character position to be off, since the newline we read from
784          the user is not accounted for.  */
785       fputs_unfiltered (prompt, gdb_stdout);
786       gdb_flush (gdb_stdout);
787     }
788
789   while (1)
790     {
791       int c;
792       int numfds;
793       fd_set readfds;
794
795       QUIT;
796
797       /* Wait until at least one byte of data is available.  Control-C
798          can interrupt interruptible_select, but not fgetc.  */
799       FD_ZERO (&readfds);
800       FD_SET (fd, &readfds);
801       if (interruptible_select (fd + 1, &readfds, NULL, NULL, NULL) == -1)
802         {
803           if (errno == EINTR)
804             {
805               /* If this was ctrl-c, the QUIT above handles it.  */
806               continue;
807             }
808           perror_with_name (("select"));
809         }
810
811       c = fgetc (stream);
812
813       if (c == EOF)
814         {
815           if (line_buffer.used_size > 0)
816             /* The last line does not end with a newline.  Return it, and
817                if we are called again fgetc will still return EOF and
818                we'll return NULL then.  */
819             break;
820           xfree (buffer_finish (&line_buffer));
821           return NULL;
822         }
823
824       if (c == '\n')
825         {
826           if (line_buffer.used_size > 0
827               && line_buffer.buffer[line_buffer.used_size - 1] == '\r')
828             line_buffer.used_size--;
829           break;
830         }
831
832       buffer_grow_char (&line_buffer, c);
833     }
834
835   buffer_grow_char (&line_buffer, '\0');
836   return buffer_finish (&line_buffer);
837 }
838
839 /* Variables which control command line editing and history
840    substitution.  These variables are given default values at the end
841    of this file.  */
842 static int command_editing_p;
843
844 /* NOTE 1999-04-29: This variable will be static again, once we modify
845    gdb to use the event loop as the default command loop and we merge
846    event-top.c into this file, top.c.  */
847
848 /* static */ int history_expansion_p;
849
850 static int write_history_p;
851 static void
852 show_write_history_p (struct ui_file *file, int from_tty,
853                       struct cmd_list_element *c, const char *value)
854 {
855   fprintf_filtered (file, _("Saving of the history record on exit is %s.\n"),
856                     value);
857 }
858
859 /* The variable associated with the "set/show history size"
860    command.  The value -1 means unlimited, and -2 means undefined.  */
861 static int history_size_setshow_var = -2;
862
863 static void
864 show_history_size (struct ui_file *file, int from_tty,
865                    struct cmd_list_element *c, const char *value)
866 {
867   fprintf_filtered (file, _("The size of the command history is %s.\n"),
868                     value);
869 }
870
871 /* Variable associated with the "history remove-duplicates" option.
872    The value -1 means unlimited.  */
873 static int history_remove_duplicates = 0;
874
875 static void
876 show_history_remove_duplicates (struct ui_file *file, int from_tty,
877                                 struct cmd_list_element *c, const char *value)
878 {
879   fprintf_filtered (file,
880                     _("The number of history entries to look back at for "
881                       "duplicates is %s.\n"),
882                     value);
883 }
884
885 static char *history_filename;
886 static void
887 show_history_filename (struct ui_file *file, int from_tty,
888                        struct cmd_list_element *c, const char *value)
889 {
890   fprintf_filtered (file, _("The filename in which to record "
891                             "the command history is \"%s\".\n"),
892                     value);
893 }
894
895 /* This is like readline(), but it has some gdb-specific behavior.
896    gdb may want readline in both the synchronous and async modes during
897    a single gdb invocation.  At the ordinary top-level prompt we might
898    be using the async readline.  That means we can't use
899    rl_pre_input_hook, since it doesn't work properly in async mode.
900    However, for a secondary prompt (" >", such as occurs during a
901    `define'), gdb wants a synchronous response.
902
903    We used to call readline() directly, running it in synchronous
904    mode.  But mixing modes this way is not supported, and as of
905    readline 5.x it no longer works; the arrow keys come unbound during
906    the synchronous call.  So we make a nested call into the event
907    loop.  That's what gdb_readline_wrapper is for.  */
908
909 /* A flag set as soon as gdb_readline_wrapper_line is called; we can't
910    rely on gdb_readline_wrapper_result, which might still be NULL if
911    the user types Control-D for EOF.  */
912 static int gdb_readline_wrapper_done;
913
914 /* The result of the current call to gdb_readline_wrapper, once a newline
915    is seen.  */
916 static char *gdb_readline_wrapper_result;
917
918 /* Any intercepted hook.  Operate-and-get-next sets this, expecting it
919    to be called after the newline is processed (which will redisplay
920    the prompt).  But in gdb_readline_wrapper we will not get a new
921    prompt until the next call, or until we return to the event loop.
922    So we disable this hook around the newline and restore it before we
923    return.  */
924 static void (*saved_after_char_processing_hook) (void);
925
926
927 /* See top.h.  */
928
929 int
930 gdb_in_secondary_prompt_p (struct ui *ui)
931 {
932   return ui->secondary_prompt_depth > 0;
933 }
934
935
936 /* This function is called when readline has seen a complete line of
937    text.  */
938
939 static void
940 gdb_readline_wrapper_line (char *line)
941 {
942   gdb_assert (!gdb_readline_wrapper_done);
943   gdb_readline_wrapper_result = line;
944   gdb_readline_wrapper_done = 1;
945
946   /* Prevent operate-and-get-next from acting too early.  */
947   saved_after_char_processing_hook = after_char_processing_hook;
948   after_char_processing_hook = NULL;
949
950   /* Prevent parts of the prompt from being redisplayed if annotations
951      are enabled, and readline's state getting out of sync.  We'll
952      reinstall the callback handler, which puts the terminal in raw
953      mode (or in readline lingo, in prepped state), when we're next
954      ready to process user input, either in display_gdb_prompt, or if
955      we're handling an asynchronous target event and running in the
956      background, just before returning to the event loop to process
957      further input (or more target events).  */
958   if (current_ui->command_editing)
959     gdb_rl_callback_handler_remove ();
960 }
961
962 struct gdb_readline_wrapper_cleanup
963   {
964     void (*handler_orig) (char *);
965     int already_prompted_orig;
966
967     /* Whether the target was async.  */
968     int target_is_async_orig;
969   };
970
971 static void
972 gdb_readline_wrapper_cleanup (void *arg)
973 {
974   struct ui *ui = current_ui;
975   struct gdb_readline_wrapper_cleanup *cleanup
976     = (struct gdb_readline_wrapper_cleanup *) arg;
977
978   if (ui->command_editing)
979     rl_already_prompted = cleanup->already_prompted_orig;
980
981   gdb_assert (ui->input_handler == gdb_readline_wrapper_line);
982   ui->input_handler = cleanup->handler_orig;
983
984   /* Don't restore our input handler in readline yet.  That would make
985      readline prep the terminal (putting it in raw mode), while the
986      line we just read may trigger execution of a command that expects
987      the terminal in the default cooked/canonical mode, such as e.g.,
988      running Python's interactive online help utility.  See
989      gdb_readline_wrapper_line for when we'll reinstall it.  */
990
991   gdb_readline_wrapper_result = NULL;
992   gdb_readline_wrapper_done = 0;
993   ui->secondary_prompt_depth--;
994   gdb_assert (ui->secondary_prompt_depth >= 0);
995
996   after_char_processing_hook = saved_after_char_processing_hook;
997   saved_after_char_processing_hook = NULL;
998
999   if (cleanup->target_is_async_orig)
1000     target_async (1);
1001
1002   xfree (cleanup);
1003 }
1004
1005 char *
1006 gdb_readline_wrapper (const char *prompt)
1007 {
1008   struct ui *ui = current_ui;
1009   struct cleanup *back_to;
1010   struct gdb_readline_wrapper_cleanup *cleanup;
1011   char *retval;
1012
1013   cleanup = XNEW (struct gdb_readline_wrapper_cleanup);
1014   cleanup->handler_orig = ui->input_handler;
1015   ui->input_handler = gdb_readline_wrapper_line;
1016
1017   if (ui->command_editing)
1018     cleanup->already_prompted_orig = rl_already_prompted;
1019   else
1020     cleanup->already_prompted_orig = 0;
1021
1022   cleanup->target_is_async_orig = target_is_async_p ();
1023
1024   ui->secondary_prompt_depth++;
1025   back_to = make_cleanup (gdb_readline_wrapper_cleanup, cleanup);
1026
1027   /* Processing events may change the current UI.  */
1028   scoped_restore save_ui = make_scoped_restore (&current_ui);
1029
1030   if (cleanup->target_is_async_orig)
1031     target_async (0);
1032
1033   /* Display our prompt and prevent double prompt display.  Don't pass
1034      down a NULL prompt, since that has special meaning for
1035      display_gdb_prompt -- it indicates a request to print the primary
1036      prompt, while we want a secondary prompt here.  */
1037   display_gdb_prompt (prompt != NULL ? prompt : "");
1038   if (ui->command_editing)
1039     rl_already_prompted = 1;
1040
1041   if (after_char_processing_hook)
1042     (*after_char_processing_hook) ();
1043   gdb_assert (after_char_processing_hook == NULL);
1044
1045   while (gdb_do_one_event () >= 0)
1046     if (gdb_readline_wrapper_done)
1047       break;
1048
1049   retval = gdb_readline_wrapper_result;
1050   do_cleanups (back_to);
1051   return retval;
1052 }
1053
1054 \f
1055 /* The current saved history number from operate-and-get-next.
1056    This is -1 if not valid.  */
1057 static int operate_saved_history = -1;
1058
1059 /* This is put on the appropriate hook and helps operate-and-get-next
1060    do its work.  */
1061 static void
1062 gdb_rl_operate_and_get_next_completion (void)
1063 {
1064   int delta = where_history () - operate_saved_history;
1065
1066   /* The `key' argument to rl_get_previous_history is ignored.  */
1067   rl_get_previous_history (delta, 0);
1068   operate_saved_history = -1;
1069
1070   /* readline doesn't automatically update the display for us.  */
1071   rl_redisplay ();
1072
1073   after_char_processing_hook = NULL;
1074   rl_pre_input_hook = NULL;
1075 }
1076
1077 /* This is a gdb-local readline command handler.  It accepts the
1078    current command line (like RET does) and, if this command was taken
1079    from the history, arranges for the next command in the history to
1080    appear on the command line when the prompt returns.
1081    We ignore the arguments.  */
1082 static int
1083 gdb_rl_operate_and_get_next (int count, int key)
1084 {
1085   int where;
1086
1087   /* Use the async hook.  */
1088   after_char_processing_hook = gdb_rl_operate_and_get_next_completion;
1089
1090   /* Find the current line, and find the next line to use.  */
1091   where = where_history();
1092
1093   if ((history_is_stifled () && (history_length >= history_max_entries))
1094       || (where >= history_length - 1))
1095     operate_saved_history = where;
1096   else
1097     operate_saved_history = where + 1;
1098
1099   return rl_newline (1, key);
1100 }
1101
1102 /* Number of user commands executed during this session.  */
1103
1104 static int command_count = 0;
1105
1106 /* Add the user command COMMAND to the input history list.  */
1107
1108 void
1109 gdb_add_history (const char *command)
1110 {
1111   command_count++;
1112
1113   if (history_remove_duplicates != 0)
1114     {
1115       int lookbehind;
1116       int lookbehind_threshold;
1117
1118       /* The lookbehind threshold for finding a duplicate history entry is
1119          bounded by command_count because we can't meaningfully delete
1120          history entries that are already stored in the history file since
1121          the history file is appended to.  */
1122       if (history_remove_duplicates == -1
1123           || history_remove_duplicates > command_count)
1124         lookbehind_threshold = command_count;
1125       else
1126         lookbehind_threshold = history_remove_duplicates;
1127
1128       using_history ();
1129       for (lookbehind = 0; lookbehind < lookbehind_threshold; lookbehind++)
1130         {
1131           HIST_ENTRY *temp = previous_history ();
1132
1133           if (temp == NULL)
1134             break;
1135
1136           if (strcmp (temp->line, command) == 0)
1137             {
1138               HIST_ENTRY *prev = remove_history (where_history ());
1139               command_count--;
1140               free_history_entry (prev);
1141               break;
1142             }
1143         }
1144       using_history ();
1145     }
1146
1147   add_history (command);
1148 }
1149
1150 /* Safely append new history entries to the history file in a corruption-free
1151    way using an intermediate local history file.  */
1152
1153 static void
1154 gdb_safe_append_history (void)
1155 {
1156   int ret, saved_errno;
1157   char *local_history_filename;
1158   struct cleanup *old_chain;
1159
1160   local_history_filename
1161     = xstrprintf ("%s-gdb%ld~", history_filename, (long) getpid ());
1162   old_chain = make_cleanup (xfree, local_history_filename);
1163
1164   ret = rename (history_filename, local_history_filename);
1165   saved_errno = errno;
1166   if (ret < 0 && saved_errno != ENOENT)
1167     {
1168       warning (_("Could not rename %s to %s: %s"),
1169                history_filename, local_history_filename,
1170                safe_strerror (saved_errno));
1171     }
1172   else
1173     {
1174       if (ret < 0)
1175         {
1176           /* If the rename failed with ENOENT then either the global history
1177              file never existed in the first place or another GDB process is
1178              currently appending to it (and has thus temporarily renamed it).
1179              Since we can't distinguish between these two cases, we have to
1180              conservatively assume the first case and therefore must write out
1181              (not append) our known history to our local history file and try
1182              to move it back anyway.  Otherwise a global history file would
1183              never get created!  */
1184            gdb_assert (saved_errno == ENOENT);
1185            write_history (local_history_filename);
1186         }
1187       else
1188         {
1189           append_history (command_count, local_history_filename);
1190           if (history_is_stifled ())
1191             history_truncate_file (local_history_filename, history_max_entries);
1192         }
1193
1194       ret = rename (local_history_filename, history_filename);
1195       saved_errno = errno;
1196       if (ret < 0 && saved_errno != EEXIST)
1197         warning (_("Could not rename %s to %s: %s"),
1198                  local_history_filename, history_filename,
1199                  safe_strerror (saved_errno));
1200     }
1201
1202   do_cleanups (old_chain);
1203 }
1204
1205 /* Read one line from the command input stream `instream' into a local
1206    static buffer.  The buffer is made bigger as necessary.  Returns
1207    the address of the start of the line.
1208
1209    NULL is returned for end of file.
1210
1211    *If* input is from an interactive stream (stdin), the line read is
1212    copied into the global 'saved_command_line' so that it can be
1213    repeated.
1214
1215    This routine either uses fancy command line editing or simple input
1216    as the user has requested.  */
1217
1218 char *
1219 command_line_input (const char *prompt_arg, int repeat, char *annotation_suffix)
1220 {
1221   static struct buffer cmd_line_buffer;
1222   static int cmd_line_buffer_initialized;
1223   struct ui *ui = current_ui;
1224   const char *prompt = prompt_arg;
1225   char *cmd;
1226   int from_tty = ui->instream == ui->stdin_stream;
1227
1228   /* The annotation suffix must be non-NULL.  */
1229   if (annotation_suffix == NULL)
1230     annotation_suffix = "";
1231
1232   if (from_tty && annotation_level > 1)
1233     {
1234       char *local_prompt;
1235
1236       local_prompt
1237         = (char *) alloca ((prompt == NULL ? 0 : strlen (prompt))
1238                            + strlen (annotation_suffix) + 40);
1239       if (prompt == NULL)
1240         local_prompt[0] = '\0';
1241       else
1242         strcpy (local_prompt, prompt);
1243       strcat (local_prompt, "\n\032\032");
1244       strcat (local_prompt, annotation_suffix);
1245       strcat (local_prompt, "\n");
1246
1247       prompt = local_prompt;
1248     }
1249
1250   if (!cmd_line_buffer_initialized)
1251     {
1252       buffer_init (&cmd_line_buffer);
1253       cmd_line_buffer_initialized = 1;
1254     }
1255
1256   /* Starting a new command line.  */
1257   cmd_line_buffer.used_size = 0;
1258
1259 #ifdef STOP_SIGNAL
1260   if (job_control)
1261     signal (STOP_SIGNAL, handle_stop_sig);
1262 #endif
1263
1264   while (1)
1265     {
1266       char *rl;
1267
1268       /* Make sure that all output has been output.  Some machines may
1269          let you get away with leaving out some of the gdb_flush, but
1270          not all.  */
1271       wrap_here ("");
1272       gdb_flush (gdb_stdout);
1273       gdb_flush (gdb_stderr);
1274
1275       if (source_file_name != NULL)
1276         ++source_line_number;
1277
1278       if (from_tty && annotation_level > 1)
1279         {
1280           puts_unfiltered ("\n\032\032pre-");
1281           puts_unfiltered (annotation_suffix);
1282           puts_unfiltered ("\n");
1283         }
1284
1285       /* Don't use fancy stuff if not talking to stdin.  */
1286       if (deprecated_readline_hook
1287           && from_tty
1288           && input_interactive_p (current_ui))
1289         {
1290           rl = (*deprecated_readline_hook) (prompt);
1291         }
1292       else if (command_editing_p
1293                && from_tty
1294                && input_interactive_p (current_ui))
1295         {
1296           rl = gdb_readline_wrapper (prompt);
1297         }
1298       else
1299         {
1300           rl = gdb_readline_no_editing (prompt);
1301         }
1302
1303       cmd = handle_line_of_input (&cmd_line_buffer, rl,
1304                                   repeat, annotation_suffix);
1305       if (cmd == (char *) EOF)
1306         {
1307           cmd = NULL;
1308           break;
1309         }
1310       if (cmd != NULL)
1311         break;
1312
1313       /* Got partial input.  I.e., got a line that ends with a
1314          continuation character (backslash).  Suppress printing the
1315          prompt again.  */
1316       prompt = NULL;
1317     }
1318
1319 #ifdef STOP_SIGNAL
1320   if (job_control)
1321     signal (STOP_SIGNAL, SIG_DFL);
1322 #endif
1323
1324   return cmd;
1325 }
1326 \f
1327 /* Print the GDB banner.  */
1328 void
1329 print_gdb_version (struct ui_file *stream)
1330 {
1331   /* From GNU coding standards, first line is meant to be easy for a
1332      program to parse, and is just canonical program name and version
1333      number, which starts after last space.  */
1334
1335   fprintf_filtered (stream, "GNU gdb %s%s\n", PKGVERSION, version);
1336
1337   /* Second line is a copyright notice.  */
1338
1339   fprintf_filtered (stream,
1340                     "Copyright (C) 2017 Free Software Foundation, Inc.\n");
1341
1342   /* Following the copyright is a brief statement that the program is
1343      free software, that users are free to copy and change it on
1344      certain conditions, that it is covered by the GNU GPL, and that
1345      there is no warranty.  */
1346
1347   fprintf_filtered (stream, "\
1348 License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\
1349 \nThis is free software: you are free to change and redistribute it.\n\
1350 There is NO WARRANTY, to the extent permitted by law.  Type \"show copying\"\n\
1351 and \"show warranty\" for details.\n");
1352
1353   /* After the required info we print the configuration information.  */
1354
1355   fprintf_filtered (stream, "This GDB was configured as \"");
1356   if (strcmp (host_name, target_name) != 0)
1357     {
1358       fprintf_filtered (stream, "--host=%s --target=%s",
1359                         host_name, target_name);
1360     }
1361   else
1362     {
1363       fprintf_filtered (stream, "%s", host_name);
1364     }
1365   fprintf_filtered (stream, "\".\n\
1366 Type \"show configuration\" for configuration details.");
1367
1368   if (REPORT_BUGS_TO[0])
1369     {
1370       fprintf_filtered (stream,
1371                         _("\nFor bug reporting instructions, please see:\n"));
1372       fprintf_filtered (stream, "%s.\n", REPORT_BUGS_TO);
1373     }
1374   fprintf_filtered (stream,
1375                     _("Find the GDB manual and other documentation \
1376 resources online at:\n<http://www.gnu.org/software/gdb/documentation/>.\n"));
1377   fprintf_filtered (stream, _("For help, type \"help\".\n"));
1378   fprintf_filtered (stream, _("Type \"apropos word\" to search for \
1379 commands related to \"word\"."));
1380 }
1381
1382 /* Print the details of GDB build-time configuration.  */
1383 void
1384 print_gdb_configuration (struct ui_file *stream)
1385 {
1386   fprintf_filtered (stream, _("\
1387 This GDB was configured as follows:\n\
1388    configure --host=%s --target=%s\n\
1389 "), host_name, target_name);
1390   fprintf_filtered (stream, _("\
1391              --with-auto-load-dir=%s\n\
1392              --with-auto-load-safe-path=%s\n\
1393 "), AUTO_LOAD_DIR, AUTO_LOAD_SAFE_PATH);
1394 #if HAVE_LIBEXPAT
1395   fprintf_filtered (stream, _("\
1396              --with-expat\n\
1397 "));
1398 #else
1399   fprintf_filtered (stream, _("\
1400              --without-expat\n\
1401 "));
1402 #endif
1403   if (GDB_DATADIR[0])
1404     fprintf_filtered (stream, _("\
1405              --with-gdb-datadir=%s%s\n\
1406 "), GDB_DATADIR, GDB_DATADIR_RELOCATABLE ? " (relocatable)" : "");
1407 #ifdef ICONV_BIN
1408   fprintf_filtered (stream, _("\
1409              --with-iconv-bin=%s%s\n\
1410 "), ICONV_BIN, ICONV_BIN_RELOCATABLE ? " (relocatable)" : "");
1411 #endif
1412   if (JIT_READER_DIR[0])
1413     fprintf_filtered (stream, _("\
1414              --with-jit-reader-dir=%s%s\n\
1415 "), JIT_READER_DIR, JIT_READER_DIR_RELOCATABLE ? " (relocatable)" : "");
1416 #if HAVE_LIBUNWIND_IA64_H
1417   fprintf_filtered (stream, _("\
1418              --with-libunwind-ia64\n\
1419 "));
1420 #else
1421   fprintf_filtered (stream, _("\
1422              --without-libunwind-ia64\n\
1423 "));
1424 #endif
1425 #if HAVE_LIBLZMA
1426   fprintf_filtered (stream, _("\
1427              --with-lzma\n\
1428 "));
1429 #else
1430   fprintf_filtered (stream, _("\
1431              --without-lzma\n\
1432 "));
1433 #endif
1434 #ifdef WITH_PYTHON_PATH
1435   fprintf_filtered (stream, _("\
1436              --with-python=%s%s\n\
1437 "), WITH_PYTHON_PATH, PYTHON_PATH_RELOCATABLE ? " (relocatable)" : "");
1438 #endif
1439 #if HAVE_GUILE
1440   fprintf_filtered (stream, _("\
1441              --with-guile\n\
1442 "));
1443 #else
1444   fprintf_filtered (stream, _("\
1445              --without-guile\n\
1446 "));
1447 #endif
1448 #ifdef RELOC_SRCDIR
1449   fprintf_filtered (stream, _("\
1450              --with-relocated-sources=%s\n\
1451 "), RELOC_SRCDIR);
1452 #endif
1453   if (DEBUGDIR[0])
1454     fprintf_filtered (stream, _("\
1455              --with-separate-debug-dir=%s%s\n\
1456 "), DEBUGDIR, DEBUGDIR_RELOCATABLE ? " (relocatable)" : "");
1457   if (TARGET_SYSTEM_ROOT[0])
1458     fprintf_filtered (stream, _("\
1459              --with-sysroot=%s%s\n\
1460 "), TARGET_SYSTEM_ROOT, TARGET_SYSTEM_ROOT_RELOCATABLE ? " (relocatable)" : "");
1461   if (SYSTEM_GDBINIT[0])
1462     fprintf_filtered (stream, _("\
1463              --with-system-gdbinit=%s%s\n\
1464 "), SYSTEM_GDBINIT, SYSTEM_GDBINIT_RELOCATABLE ? " (relocatable)" : "");
1465 #if HAVE_LIBBABELTRACE
1466     fprintf_filtered (stream, _("\
1467              --with-babeltrace\n\
1468 "));
1469 #else
1470     fprintf_filtered (stream, _("\
1471              --without-babeltrace\n\
1472 "));
1473 #endif
1474     /* We assume "relocatable" will be printed at least once, thus we always
1475        print this text.  It's a reasonably safe assumption for now.  */
1476     fprintf_filtered (stream, _("\n\
1477 (\"Relocatable\" means the directory can be moved with the GDB installation\n\
1478 tree, and GDB will still find it.)\n\
1479 "));
1480 }
1481 \f
1482
1483 /* The current top level prompt, settable with "set prompt", and/or
1484    with the python `gdb.prompt_hook' hook.  */
1485 static char *top_prompt;
1486
1487 /* Access method for the GDB prompt string.  */
1488
1489 char *
1490 get_prompt (void)
1491 {
1492   return top_prompt;
1493 }
1494
1495 /* Set method for the GDB prompt string.  */
1496
1497 void
1498 set_prompt (const char *s)
1499 {
1500   char *p = xstrdup (s);
1501
1502   xfree (top_prompt);
1503   top_prompt = p;
1504 }
1505 \f
1506
1507 struct qt_args
1508 {
1509   char *args;
1510   int from_tty;
1511 };
1512
1513 /* Callback for iterate_over_inferiors.  Kills or detaches the given
1514    inferior, depending on how we originally gained control of it.  */
1515
1516 static int
1517 kill_or_detach (struct inferior *inf, void *args)
1518 {
1519   struct qt_args *qt = (struct qt_args *) args;
1520   struct thread_info *thread;
1521
1522   if (inf->pid == 0)
1523     return 0;
1524
1525   thread = any_thread_of_process (inf->pid);
1526   if (thread != NULL)
1527     {
1528       switch_to_thread (thread->ptid);
1529
1530       /* Leave core files alone.  */
1531       if (target_has_execution)
1532         {
1533           if (inf->attach_flag)
1534             target_detach (qt->args, qt->from_tty);
1535           else
1536             target_kill ();
1537         }
1538     }
1539
1540   return 0;
1541 }
1542
1543 /* Callback for iterate_over_inferiors.  Prints info about what GDB
1544    will do to each inferior on a "quit".  ARG points to a struct
1545    ui_out where output is to be collected.  */
1546
1547 static int
1548 print_inferior_quit_action (struct inferior *inf, void *arg)
1549 {
1550   struct ui_file *stb = (struct ui_file *) arg;
1551
1552   if (inf->pid == 0)
1553     return 0;
1554
1555   if (inf->attach_flag)
1556     fprintf_filtered (stb,
1557                       _("\tInferior %d [%s] will be detached.\n"), inf->num,
1558                       target_pid_to_str (pid_to_ptid (inf->pid)));
1559   else
1560     fprintf_filtered (stb,
1561                       _("\tInferior %d [%s] will be killed.\n"), inf->num,
1562                       target_pid_to_str (pid_to_ptid (inf->pid)));
1563
1564   return 0;
1565 }
1566
1567 /* If necessary, make the user confirm that we should quit.  Return
1568    non-zero if we should quit, zero if we shouldn't.  */
1569
1570 int
1571 quit_confirm (void)
1572 {
1573   /* Don't even ask if we're only debugging a core file inferior.  */
1574   if (!have_live_inferiors ())
1575     return 1;
1576
1577   /* Build the query string as a single string.  */
1578   string_file stb;
1579
1580   stb.puts (_("A debugging session is active.\n\n"));
1581   iterate_over_inferiors (print_inferior_quit_action, &stb);
1582   stb.puts (_("\nQuit anyway? "));
1583
1584   return query ("%s", stb.c_str ());
1585 }
1586
1587 /* Prepare to exit GDB cleanly by undoing any changes made to the
1588    terminal so that we leave the terminal in the state we acquired it.  */
1589
1590 static void
1591 undo_terminal_modifications_before_exit (void)
1592 {
1593   struct ui *saved_top_level = current_ui;
1594
1595   target_terminal_ours ();
1596
1597   current_ui = main_ui;
1598
1599 #if defined(TUI)
1600   tui_disable ();
1601 #endif
1602   gdb_disable_readline ();
1603
1604   current_ui = saved_top_level;
1605 }
1606
1607
1608 /* Quit without asking for confirmation.  */
1609
1610 void
1611 quit_force (int *exit_arg, int from_tty)
1612 {
1613   int exit_code = 0;
1614   struct qt_args qt;
1615
1616   undo_terminal_modifications_before_exit ();
1617
1618   /* An optional expression may be used to cause gdb to terminate with the 
1619      value of that expression.  */
1620   if (exit_arg)
1621     exit_code = *exit_arg;
1622   else if (return_child_result)
1623     exit_code = return_child_result_value;
1624
1625   qt.args = NULL;
1626   qt.from_tty = from_tty;
1627
1628   /* We want to handle any quit errors and exit regardless.  */
1629
1630   /* Get out of tfind mode, and kill or detach all inferiors.  */
1631   TRY
1632     {
1633       disconnect_tracing ();
1634       iterate_over_inferiors (kill_or_detach, &qt);
1635     }
1636   CATCH (ex, RETURN_MASK_ALL)
1637     {
1638       exception_print (gdb_stderr, ex);
1639     }
1640   END_CATCH
1641
1642   /* Give all pushed targets a chance to do minimal cleanup, and pop
1643      them all out.  */
1644   TRY
1645     {
1646       pop_all_targets ();
1647     }
1648   CATCH (ex, RETURN_MASK_ALL)
1649     {
1650       exception_print (gdb_stderr, ex);
1651     }
1652   END_CATCH
1653
1654   /* Save the history information if it is appropriate to do so.  */
1655   TRY
1656     {
1657       if (write_history_p && history_filename)
1658         {
1659           struct ui *ui;
1660           int save = 0;
1661
1662           /* History is currently shared between all UIs.  If there's
1663              any UI with a terminal, save history.  */
1664           ALL_UIS (ui)
1665             {
1666               if (input_interactive_p (ui))
1667                 {
1668                   save = 1;
1669                   break;
1670                 }
1671             }
1672
1673           if (save)
1674             gdb_safe_append_history ();
1675         }
1676     }
1677   CATCH (ex, RETURN_MASK_ALL)
1678     {
1679       exception_print (gdb_stderr, ex);
1680     }
1681   END_CATCH
1682
1683   /* Do any final cleanups before exiting.  */
1684   TRY
1685     {
1686       do_final_cleanups (all_cleanups ());
1687     }
1688   CATCH (ex, RETURN_MASK_ALL)
1689     {
1690       exception_print (gdb_stderr, ex);
1691     }
1692   END_CATCH
1693
1694   exit (exit_code);
1695 }
1696
1697 /* The value of the "interactive-mode" setting.  */
1698 static enum auto_boolean interactive_mode = AUTO_BOOLEAN_AUTO;
1699
1700 /* Implement the "show interactive-mode" option.  */
1701
1702 static void
1703 show_interactive_mode (struct ui_file *file, int from_tty,
1704                        struct cmd_list_element *c,
1705                        const char *value)
1706 {
1707   if (interactive_mode == AUTO_BOOLEAN_AUTO)
1708     fprintf_filtered (file, "Debugger's interactive mode "
1709                             "is %s (currently %s).\n",
1710                       value, input_interactive_p (current_ui) ? "on" : "off");
1711   else
1712     fprintf_filtered (file, "Debugger's interactive mode is %s.\n", value);
1713 }
1714
1715 /* Returns whether GDB is running on an interactive terminal.  */
1716
1717 int
1718 input_interactive_p (struct ui *ui)
1719 {
1720   if (batch_flag)
1721     return 0;
1722
1723   if (interactive_mode != AUTO_BOOLEAN_AUTO)
1724     return interactive_mode == AUTO_BOOLEAN_TRUE;
1725
1726   return ui->input_interactive_p;
1727 }
1728 \f
1729 static void
1730 dont_repeat_command (char *ignored, int from_tty)
1731 {
1732   /* Can't call dont_repeat here because we're not necessarily reading
1733      from stdin.  */
1734   *saved_command_line = 0;
1735 }
1736 \f
1737 /* Functions to manipulate command line editing control variables.  */
1738
1739 /* Number of commands to print in each call to show_commands.  */
1740 #define Hist_print 10
1741 void
1742 show_commands (char *args, int from_tty)
1743 {
1744   /* Index for history commands.  Relative to history_base.  */
1745   int offset;
1746
1747   /* Number of the history entry which we are planning to display next.
1748      Relative to history_base.  */
1749   static int num = 0;
1750
1751   /* Print out some of the commands from the command history.  */
1752
1753   if (args)
1754     {
1755       if (args[0] == '+' && args[1] == '\0')
1756         /* "info editing +" should print from the stored position.  */
1757         ;
1758       else
1759         /* "info editing <exp>" should print around command number <exp>.  */
1760         num = (parse_and_eval_long (args) - history_base) - Hist_print / 2;
1761     }
1762   /* "show commands" means print the last Hist_print commands.  */
1763   else
1764     {
1765       num = history_length - Hist_print;
1766     }
1767
1768   if (num < 0)
1769     num = 0;
1770
1771   /* If there are at least Hist_print commands, we want to display the last
1772      Hist_print rather than, say, the last 6.  */
1773   if (history_length - num < Hist_print)
1774     {
1775       num = history_length - Hist_print;
1776       if (num < 0)
1777         num = 0;
1778     }
1779
1780   for (offset = num;
1781        offset < num + Hist_print && offset < history_length;
1782        offset++)
1783     {
1784       printf_filtered ("%5d  %s\n", history_base + offset,
1785                        (history_get (history_base + offset))->line);
1786     }
1787
1788   /* The next command we want to display is the next one that we haven't
1789      displayed yet.  */
1790   num += Hist_print;
1791
1792   /* If the user repeats this command with return, it should do what
1793      "show commands +" does.  This is unnecessary if arg is null,
1794      because "show commands +" is not useful after "show commands".  */
1795   if (from_tty && args)
1796     {
1797       args[0] = '+';
1798       args[1] = '\0';
1799     }
1800 }
1801
1802 /* Update the size of our command history file to HISTORY_SIZE.
1803
1804    A HISTORY_SIZE of -1 stands for unlimited.  */
1805
1806 static void
1807 set_readline_history_size (int history_size)
1808 {
1809   gdb_assert (history_size >= -1);
1810
1811   if (history_size == -1)
1812     unstifle_history ();
1813   else
1814     stifle_history (history_size);
1815 }
1816
1817 /* Called by do_setshow_command.  */
1818 static void
1819 set_history_size_command (char *args, int from_tty, struct cmd_list_element *c)
1820 {
1821   set_readline_history_size (history_size_setshow_var);
1822 }
1823
1824 void
1825 set_history (char *args, int from_tty)
1826 {
1827   printf_unfiltered (_("\"set history\" must be followed "
1828                        "by the name of a history subcommand.\n"));
1829   help_list (sethistlist, "set history ", all_commands, gdb_stdout);
1830 }
1831
1832 void
1833 show_history (char *args, int from_tty)
1834 {
1835   cmd_show_list (showhistlist, from_tty, "");
1836 }
1837
1838 int info_verbose = 0;           /* Default verbose msgs off.  */
1839
1840 /* Called by do_setshow_command.  An elaborate joke.  */
1841 void
1842 set_verbose (char *args, int from_tty, struct cmd_list_element *c)
1843 {
1844   const char *cmdname = "verbose";
1845   struct cmd_list_element *showcmd;
1846
1847   showcmd = lookup_cmd_1 (&cmdname, showlist, NULL, 1);
1848   gdb_assert (showcmd != NULL && showcmd != CMD_LIST_AMBIGUOUS);
1849
1850   if (info_verbose)
1851     {
1852       c->doc = "Set verbose printing of informational messages.";
1853       showcmd->doc = "Show verbose printing of informational messages.";
1854     }
1855   else
1856     {
1857       c->doc = "Set verbosity.";
1858       showcmd->doc = "Show verbosity.";
1859     }
1860 }
1861
1862 /* Init the history buffer.  Note that we are called after the init file(s)
1863    have been read so that the user can change the history file via his
1864    .gdbinit file (for instance).  The GDBHISTFILE environment variable
1865    overrides all of this.  */
1866
1867 void
1868 init_history (void)
1869 {
1870   char *tmpenv;
1871
1872   tmpenv = getenv ("GDBHISTSIZE");
1873   if (tmpenv)
1874     {
1875       long var;
1876       int saved_errno;
1877       char *endptr;
1878
1879       tmpenv = skip_spaces (tmpenv);
1880       errno = 0;
1881       var = strtol (tmpenv, &endptr, 10);
1882       saved_errno = errno;
1883       endptr = skip_spaces (endptr);
1884
1885       /* If GDBHISTSIZE is non-numeric then ignore it.  If GDBHISTSIZE is the
1886          empty string, a negative number or a huge positive number (larger than
1887          INT_MAX) then set the history size to unlimited.  Otherwise set our
1888          history size to the number we have read.  This behavior is consistent
1889          with how bash handles HISTSIZE.  */
1890       if (*endptr != '\0')
1891         ;
1892       else if (*tmpenv == '\0'
1893                || var < 0
1894                || var > INT_MAX
1895                /* On targets where INT_MAX == LONG_MAX, we have to look at
1896                   errno after calling strtol to distinguish between a value that
1897                   is exactly INT_MAX and an overflowing value that was clamped
1898                   to INT_MAX.  */
1899                || (var == INT_MAX && saved_errno == ERANGE))
1900         history_size_setshow_var = -1;
1901       else
1902         history_size_setshow_var = var;
1903     }
1904
1905   /* If neither the init file nor GDBHISTSIZE has set a size yet, pick the
1906      default.  */
1907   if (history_size_setshow_var == -2)
1908     history_size_setshow_var = 256;
1909
1910   set_readline_history_size (history_size_setshow_var);
1911
1912   tmpenv = getenv ("GDBHISTFILE");
1913   if (tmpenv)
1914     history_filename = xstrdup (tmpenv);
1915   else if (!history_filename)
1916     {
1917       /* We include the current directory so that if the user changes
1918          directories the file written will be the same as the one
1919          that was read.  */
1920 #ifdef __MSDOS__
1921       /* No leading dots in file names are allowed on MSDOS.  */
1922       history_filename = concat (current_directory, "/_gdb_history",
1923                                  (char *)NULL);
1924 #else
1925       history_filename = concat (current_directory, "/.gdb_history",
1926                                  (char *)NULL);
1927 #endif
1928     }
1929   read_history (history_filename);
1930 }
1931
1932 static void
1933 show_prompt (struct ui_file *file, int from_tty,
1934              struct cmd_list_element *c, const char *value)
1935 {
1936   fprintf_filtered (file, _("Gdb's prompt is \"%s\".\n"), value);
1937 }
1938
1939 /* "set editing" command.  */
1940
1941 static void
1942 set_editing (char *args, int from_tty, struct cmd_list_element *c)
1943 {
1944   change_line_handler (set_editing_cmd_var);
1945   /* Update the control variable so that MI's =cmd-param-changed event
1946      shows the correct value. */
1947   set_editing_cmd_var = current_ui->command_editing;
1948 }
1949
1950 static void
1951 show_editing (struct ui_file *file, int from_tty,
1952               struct cmd_list_element *c, const char *value)
1953 {
1954   fprintf_filtered (file, _("Editing of command lines as "
1955                             "they are typed is %s.\n"),
1956                     current_ui->command_editing ? _("on") : _("off"));
1957 }
1958
1959 static void
1960 show_annotation_level (struct ui_file *file, int from_tty,
1961                        struct cmd_list_element *c, const char *value)
1962 {
1963   fprintf_filtered (file, _("Annotation_level is %s.\n"), value);
1964 }
1965
1966 static void
1967 show_exec_done_display_p (struct ui_file *file, int from_tty,
1968                           struct cmd_list_element *c, const char *value)
1969 {
1970   fprintf_filtered (file, _("Notification of completion for "
1971                             "asynchronous execution commands is %s.\n"),
1972                     value);
1973 }
1974
1975 /* New values of the "data-directory" parameter are staged here.  */
1976 static char *staged_gdb_datadir;
1977
1978 /* "set" command for the gdb_datadir configuration variable.  */
1979
1980 static void
1981 set_gdb_datadir (char *args, int from_tty, struct cmd_list_element *c)
1982 {
1983   set_gdb_data_directory (staged_gdb_datadir);
1984   observer_notify_gdb_datadir_changed ();
1985 }
1986
1987 /* "show" command for the gdb_datadir configuration variable.  */
1988
1989 static void
1990 show_gdb_datadir (struct ui_file *file, int from_tty,
1991                   struct cmd_list_element *c, const char *value)
1992 {
1993   fprintf_filtered (file, _("GDB's data directory is \"%s\".\n"),
1994                     gdb_datadir);
1995 }
1996
1997 static void
1998 set_history_filename (char *args, int from_tty, struct cmd_list_element *c)
1999 {
2000   /* We include the current directory so that if the user changes
2001      directories the file written will be the same as the one
2002      that was read.  */
2003   if (!IS_ABSOLUTE_PATH (history_filename))
2004     history_filename = reconcat (history_filename, current_directory, "/", 
2005                                  history_filename, (char *) NULL);
2006 }
2007
2008 static void
2009 init_main (void)
2010 {
2011   struct cmd_list_element *c;
2012
2013   /* Initialize the prompt to a simple "(gdb) " prompt or to whatever
2014      the DEFAULT_PROMPT is.  */
2015   set_prompt (DEFAULT_PROMPT);
2016
2017   /* Set the important stuff up for command editing.  */
2018   command_editing_p = 1;
2019   history_expansion_p = 0;
2020   write_history_p = 0;
2021
2022   /* Setup important stuff for command line editing.  */
2023   rl_completion_word_break_hook = gdb_completion_word_break_characters;
2024   rl_completion_entry_function = readline_line_completion_function;
2025   rl_completer_word_break_characters = default_word_break_characters ();
2026   rl_completer_quote_characters = get_gdb_completer_quote_characters ();
2027   rl_completion_display_matches_hook = cli_display_match_list;
2028   rl_readline_name = "gdb";
2029   rl_terminal_name = getenv ("TERM");
2030
2031   /* The name for this defun comes from Bash, where it originated.
2032      15 is Control-o, the same binding this function has in Bash.  */
2033   rl_add_defun ("operate-and-get-next", gdb_rl_operate_and_get_next, 15);
2034
2035   add_setshow_string_cmd ("prompt", class_support,
2036                           &top_prompt,
2037                           _("Set gdb's prompt"),
2038                           _("Show gdb's prompt"),
2039                           NULL, NULL,
2040                           show_prompt,
2041                           &setlist, &showlist);
2042
2043   add_com ("dont-repeat", class_support, dont_repeat_command, _("\
2044 Don't repeat this command.\nPrimarily \
2045 used inside of user-defined commands that should not be repeated when\n\
2046 hitting return."));
2047
2048   add_setshow_boolean_cmd ("editing", class_support,
2049                            &set_editing_cmd_var, _("\
2050 Set editing of command lines as they are typed."), _("\
2051 Show editing of command lines as they are typed."), _("\
2052 Use \"on\" to enable the editing, and \"off\" to disable it.\n\
2053 Without an argument, command line editing is enabled.  To edit, use\n\
2054 EMACS-like or VI-like commands like control-P or ESC."),
2055                            set_editing,
2056                            show_editing,
2057                            &setlist, &showlist);
2058
2059   add_setshow_boolean_cmd ("save", no_class, &write_history_p, _("\
2060 Set saving of the history record on exit."), _("\
2061 Show saving of the history record on exit."), _("\
2062 Use \"on\" to enable the saving, and \"off\" to disable it.\n\
2063 Without an argument, saving is enabled."),
2064                            NULL,
2065                            show_write_history_p,
2066                            &sethistlist, &showhistlist);
2067
2068   add_setshow_zuinteger_unlimited_cmd ("size", no_class,
2069                                        &history_size_setshow_var, _("\
2070 Set the size of the command history,"), _("\
2071 Show the size of the command history,"), _("\
2072 ie. the number of previous commands to keep a record of.\n\
2073 If set to \"unlimited\", the number of commands kept in the history\n\
2074 list is unlimited.  This defaults to the value of the environment\n\
2075 variable \"GDBHISTSIZE\", or to 256 if this variable is not set."),
2076                             set_history_size_command,
2077                             show_history_size,
2078                             &sethistlist, &showhistlist);
2079
2080   add_setshow_zuinteger_unlimited_cmd ("remove-duplicates", no_class,
2081                                        &history_remove_duplicates, _("\
2082 Set how far back in history to look for and remove duplicate entries."), _("\
2083 Show how far back in history to look for and remove duplicate entries."), _("\
2084 If set to a nonzero value N, GDB will look back at the last N history entries\n\
2085 and remove the first history entry that is a duplicate of the most recent\n\
2086 entry, each time a new history entry is added.\n\
2087 If set to \"unlimited\", this lookbehind is unbounded.\n\
2088 Only history entries added during this session are considered for removal.\n\
2089 If set to 0, removal of duplicate history entries is disabled.\n\
2090 By default this option is set to 0."),
2091                            NULL,
2092                            show_history_remove_duplicates,
2093                            &sethistlist, &showhistlist);
2094
2095   add_setshow_filename_cmd ("filename", no_class, &history_filename, _("\
2096 Set the filename in which to record the command history"), _("\
2097 Show the filename in which to record the command history"), _("\
2098 (the list of previous commands of which a record is kept)."),
2099                             set_history_filename,
2100                             show_history_filename,
2101                             &sethistlist, &showhistlist);
2102
2103   add_setshow_boolean_cmd ("confirm", class_support, &confirm, _("\
2104 Set whether to confirm potentially dangerous operations."), _("\
2105 Show whether to confirm potentially dangerous operations."), NULL,
2106                            NULL,
2107                            show_confirm,
2108                            &setlist, &showlist);
2109
2110   add_setshow_zinteger_cmd ("annotate", class_obscure, &annotation_level, _("\
2111 Set annotation_level."), _("\
2112 Show annotation_level."), _("\
2113 0 == normal;     1 == fullname (for use when running under emacs)\n\
2114 2 == output annotated suitably for use by programs that control GDB."),
2115                             NULL,
2116                             show_annotation_level,
2117                             &setlist, &showlist);
2118
2119   add_setshow_boolean_cmd ("exec-done-display", class_support,
2120                            &exec_done_display_p, _("\
2121 Set notification of completion for asynchronous execution commands."), _("\
2122 Show notification of completion for asynchronous execution commands."), _("\
2123 Use \"on\" to enable the notification, and \"off\" to disable it."),
2124                            NULL,
2125                            show_exec_done_display_p,
2126                            &setlist, &showlist);
2127
2128   add_setshow_filename_cmd ("data-directory", class_maintenance,
2129                            &staged_gdb_datadir, _("Set GDB's data directory."),
2130                            _("Show GDB's data directory."),
2131                            _("\
2132 When set, GDB uses the specified path to search for data files."),
2133                            set_gdb_datadir, show_gdb_datadir,
2134                            &setlist,
2135                            &showlist);
2136
2137   add_setshow_auto_boolean_cmd ("interactive-mode", class_support,
2138                                 &interactive_mode, _("\
2139 Set whether GDB's standard input is a terminal."), _("\
2140 Show whether GDB's standard input is a terminal."), _("\
2141 If on, GDB assumes that standard input is a terminal.  In practice, it\n\
2142 means that GDB should wait for the user to answer queries associated to\n\
2143 commands entered at the command prompt.  If off, GDB assumes that standard\n\
2144 input is not a terminal, and uses the default answer to all queries.\n\
2145 If auto (the default), determine which mode to use based on the standard\n\
2146 input settings."),
2147                         NULL,
2148                         show_interactive_mode,
2149                         &setlist, &showlist);
2150
2151   c = add_cmd ("new-ui", class_support, new_ui_command, _("\
2152 Create a new UI.  It takes two arguments:\n\
2153 The first argument is the name of the interpreter to run.\n\
2154 The second argument is the terminal the UI runs on.\n"), &cmdlist);
2155   set_cmd_completer (c, interpreter_completer);
2156 }
2157
2158 void
2159 gdb_init (char *argv0)
2160 {
2161   if (pre_init_ui_hook)
2162     pre_init_ui_hook ();
2163
2164   /* Run the init function of each source file.  */
2165
2166 #ifdef __MSDOS__
2167   /* Make sure we return to the original directory upon exit, come
2168      what may, since the OS doesn't do that for us.  */
2169   make_final_cleanup (do_chdir_cleanup, xstrdup (current_directory));
2170 #endif
2171
2172   init_cmd_lists ();        /* This needs to be done first.  */
2173   initialize_targets ();    /* Setup target_terminal macros for utils.c.  */
2174   initialize_utils ();      /* Make errors and warnings possible.  */
2175
2176   init_page_info ();
2177
2178   /* Here is where we call all the _initialize_foo routines.  */
2179   initialize_all_files ();
2180
2181   /* This creates the current_program_space.  Do this after all the
2182      _initialize_foo routines have had a chance to install their
2183      per-sspace data keys.  Also do this before
2184      initialize_current_architecture is called, because it accesses
2185      exec_bfd of the current program space.  */
2186   initialize_progspace ();
2187   initialize_inferiors ();
2188   initialize_current_architecture ();
2189   init_cli_cmds();
2190   init_main ();                 /* But that omits this file!  Do it now.  */
2191
2192   initialize_stdin_serial ();
2193
2194   /* Take a snapshot of our tty state before readline/ncurses have had a chance
2195      to alter it.  */
2196   set_initial_gdb_ttystate ();
2197
2198   async_init_signals ();
2199
2200   /* We need a default language for parsing expressions, so simple
2201      things like "set width 0" won't fail if no language is explicitly
2202      set in a config file or implicitly set by reading an executable
2203      during startup.  */
2204   set_language (language_c);
2205   expected_language = current_language; /* Don't warn about the change.  */
2206
2207   /* Python initialization, for example, can require various commands to be
2208      installed.  For example "info pretty-printer" needs the "info"
2209      prefix to be installed.  Keep things simple and just do final
2210      script initialization here.  */
2211   finish_ext_lang_initialization ();
2212 }