1 # Copyright 1997, 1999, 2007, 2008 Free Software Foundation, Inc.
3 # This program is free software; you can redistribute it and/or modify
4 # it under the terms of the GNU General Public License as published by
5 # the Free Software Foundation; either version 3 of the License, or
6 # (at your option) any later version.
8 # This program is distributed in the hope that it will be useful,
9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 # GNU General Public License for more details.
13 # You should have received a copy of the GNU General Public License
14 # along with this program. If not, see <http://www.gnu.org/licenses/>.
17 # This program tests the 'catch syscall' functionality.
19 # It was written by Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
22 if { [is_remote target] || ![isnative] } then {
30 set testfile "catch-syscall"
31 set srcfile ${testfile}.c
32 set binfile ${objdir}/${subdir}/${testfile}
34 # All (but the last) syscalls from the example code
35 # They are ordered according to the file, so do not change this.
36 set all_syscalls { "close" "chroot" }
37 set all_syscalls_numbers { }
38 # The last syscall (exit()) does not return, so
39 # we cannot expect the catchpoint to be triggered
40 # twice. It is a special case.
41 set last_syscall "exit_group"
43 if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
44 untested catch-syscall.exp
48 # Until "catch syscall" is implemented on other targets...
49 if {![istarget "hppa*-hp-hpux*"] && ![istarget "*-linux*"]} then {
53 # This shall be updated whenever 'catch syscall' is implemented
54 # on some architecture.
55 #if { ![istarget "i\[34567\]86-*-linux*"]
56 if { ![istarget "x86_64-*-linux*"] && ![istarget "i\[34567\]86-*-linux*"]
57 && ![istarget "powerpc-*-linux*"] && ![istarget "powerpc64-*-linux*"] } {
61 # Internal procedure used to check if, after issuing a 'catch syscall'
62 # command (without arguments), the 'info breakpoints' command displays
63 # that '"any syscall"' is to be caught.
64 proc check_info_bp_any_syscall {} {
67 # Verifying that the catchpoint appears in the 'info breakpoints'
68 # command, but with "<any syscall>".
69 set thistest "catch syscall appears in 'info breakpoints'"
70 gdb_test "info breakpoints" ".*catchpoint.*keep y.*syscall \"<any syscall>\".*" $thistest
73 # Internal procedure used to check if, after issuing a 'catch syscall X'
74 # command (with arguments), the 'info breakpoints' command displays
75 # that the syscall 'X' is to be caught.
76 proc check_info_bp_specific_syscall { syscall } {
79 set thistest "syscall(s) $syscall appears in 'info breakpoints'"
80 gdb_test "info breakpoints" ".*catchpoint.*keep y.*syscall(\[(\]s\[)\])? (.)?${syscall}(.)?.*" $thistest
83 # Internal procedure used to check if, after issuing a 'catch syscall X'
84 # command (with many arguments), the 'info breakpoints' command displays
85 # that the syscalls 'X' are to be caught.
86 proc check_info_bp_many_syscalls { syscalls } {
90 foreach name $syscalls {
91 set filter_str "${filter_str}${name}, "
94 set filter_str [ string trimright $filter_str ", " ]
96 set thistest "syscalls $filter_str appears in 'info breakpoints'"
97 gdb_test "info breakpoints" ".*catchpoint.*keep y.*syscalls (.)?${filter_str}(.)?.*" $thistest
100 # This procedure checks if there was a call to a syscall.
101 proc check_call_to_syscall { syscall } {
104 set thistest "program has called $syscall"
105 gdb_test "continue" "Catchpoint .*(call to syscall .?${syscall}.?).*" $thistest
108 # This procedure checks if the syscall returned.
109 proc check_return_from_syscall { syscall } {
112 set thistest "syscall $syscall has returned"
113 gdb_test "continue" "Catchpoint .*(returned from syscall (.)?${syscall}(.)?).*" $thistest
116 # Internal procedure that performs two 'continue' commands and checks if
117 # a syscall call AND return occur.
118 proc check_continue { syscall } {
121 # Testing if the 'continue' stops at the
122 # specified syscall_name. If it does, then it should
123 # first print that the infeior has called the syscall,
124 # and after print that the syscall has returned.
126 # Testing if the inferiorr has called the syscall.
127 check_call_to_syscall $syscall
128 # And now, that the syscall has returned.
129 check_return_from_syscall $syscall
132 # Inserts a syscall catchpoint with an argument.
133 proc insert_catch_syscall_with_arg { syscall } {
136 # Trying to set the catchpoint
137 set thistest "catch syscall with arguments ($syscall)"
138 gdb_test "catch syscall $syscall" "Catchpoint .*(syscall (.)?${syscall}(.)?( \[\[0-9\]+\])?).*" $thistest
140 check_info_bp_specific_syscall $syscall
143 # Inserts a syscall catchpoint with many arguments.
144 proc insert_catch_syscall_with_many_args { syscalls numbers } {
146 set catch [ join $syscalls " " ]
149 foreach name $syscalls number $numbers {
150 set filter_str "${filter_str}'${name}' \[${number}\] "
153 set filter_str [ string trimright $filter_str " " ]
155 # Trying to set the catchpoint
156 set thistest "catch syscall with arguments ($filter_str)"
157 gdb_test "catch syscall $catch" "Catchpoint .*(syscalls (.)?${filter_str}(.)?).*" $thistest
159 check_info_bp_many_syscalls $syscalls
162 proc check_for_program_end {} {
165 # Deleting the catchpoints
168 set thistest "successful program end"
169 gdb_test "continue" "Program exited normally.*" $thistest
173 proc test_catch_syscall_without_args {} {
174 global gdb_prompt all_syscalls last_syscall
176 # Trying to set the syscall
177 set thistest "setting catch syscall without arguments"
178 gdb_test "catch syscall" "Catchpoint .*(syscall).*" $thistest
180 check_info_bp_any_syscall
182 # We have to check every syscall
183 foreach name $all_syscalls {
187 # At last but not least, we check if the inferior
188 # has called the last (exit) syscall.
189 check_call_to_syscall $last_syscall
191 # Now let's see if the inferior correctly finishes.
192 check_for_program_end
195 proc test_catch_syscall_with_args {} {
197 set syscall_name "close"
199 insert_catch_syscall_with_arg $syscall_name
201 # Can we continue until we catch the syscall?
202 check_continue $syscall_name
204 # Now let's see if the inferior correctly finishes.
205 check_for_program_end
208 proc test_catch_syscall_with_many_args {} {
209 global gdb_prompt all_syscalls all_syscalls_numbers
211 insert_catch_syscall_with_many_args $all_syscalls $all_syscalls_numbers
213 # Can we continue until we catch the syscalls?
214 foreach name $all_syscalls {
218 # Now let's see if the inferior correctly finishes.
219 check_for_program_end
222 proc test_catch_syscall_with_wrong_args {} {
224 # mlock is not called from the source
225 set syscall_name "mlock"
227 insert_catch_syscall_with_arg $syscall_name
229 # Now, we must verify if the program stops with a continue.
230 # If it doesn't, everything is right (since we don't have
231 # a syscall named "mlock" in it). Otherwise, this is a failure.
232 set thistest "catch syscall with unused syscall ($syscall_name)"
233 gdb_test "continue" "Program exited normally.*" $thistest
236 proc test_catch_syscall_restarting_inferior {} {
238 set syscall_name "chroot"
240 insert_catch_syscall_with_arg $syscall_name
242 # Let's first reach the call of the syscall.
243 check_call_to_syscall $syscall_name
245 # Now, restart the program
248 # And check for call/return
249 check_continue $syscall_name
252 check_for_program_end
255 proc do_syscall_tests {} {
256 global gdb_prompt srcdir
258 # First, we need to set GDB datadir.
259 send_gdb "set data-directory $srcdir/..\n"
261 -re "$gdb_prompt $" {
262 verbose "Setting GDB datadir to $srcdir/..." 2
265 error "Couldn't set GDB datadir."
269 # Verify that the 'catch syscall' help is available
270 set thistest "help catch syscall"
271 gdb_test "help catch syscall" "Catch system calls.*" $thistest
273 # Try to set a catchpoint to a nonsense syscall
274 set thistest "catch syscall to a nonsense syscall is prohibited"
275 gdb_test "catch syscall nonsense_syscall" "Unknown syscall name .*" $thistest
277 # Testing the 'catch syscall' command without arguments.
278 # This test should catch any syscalls.
279 if [runto_main] then { test_catch_syscall_without_args }
281 # Testing the 'catch syscall' command with arguments.
282 # This test should only catch the specified syscall.
283 if [runto_main] then { test_catch_syscall_with_args }
285 # Testing the 'catch syscall' command with many arguments.
286 # This test should catch $all_syscalls.
287 if [runto_main] then { test_catch_syscall_with_many_args }
289 # Testing the 'catch syscall' command with WRONG arguments.
290 # This test should not trigger any catchpoints.
291 if [runto_main] then { test_catch_syscall_with_wrong_args }
293 # Testing the 'catch' syscall command during a restart of
295 if [runto_main] then { test_catch_syscall_restarting_inferior }
298 proc test_catch_syscall_fail_noxml {} {
304 # Testing to see if we receive a warning when calling "catch syscall"
305 # without XML support.
306 set thistest "Catch syscall displays a warning when there is no XML support"
307 gdb_test "catch syscall" "warning: Could not open .*warning: Could not load the syscall XML file .*GDB will not be able to display syscall names.*Catchpoint .*(syscall).*" $thistest
309 # Since the catchpoint was set, we must check if it's present at
311 check_info_bp_any_syscall
317 proc test_catch_syscall_without_args_noxml {} {
318 # We will need the syscall names even not using it
319 # because we need to know know many syscalls are in
321 global gdb_prompt all_syscalls last_syscall
325 set thistest "Catch syscall without arguments and without XML support"
326 gdb_test "catch syscall" "Catchpoint .*(syscall).*"
328 # Now, we should be able to set a catchpoint,
329 # and GDB shall not display the warning anymore.
330 foreach name $all_syscalls {
331 # Unfortunately, we don't know the syscall number
332 # that will be caught because this information is
333 # arch-dependent. Thus, we try to catch anything
334 # similar to a number.
335 check_continue "\[0-9\]*"
338 # At last but not least, we check if the inferior
339 # has called the last (exit) syscall.
340 check_call_to_syscall "\[0-9\]*"
345 proc test_catch_syscall_with_args_noxml {} {
348 # The number of the "close" syscall. This is our
349 # option for a "long-estabilished" syscall in all
350 # Linux architectures, but unfortunately x86_64 and
351 # a few other platforms don't "follow the convention".
352 # Because of this, we need this ugly check :-(.
354 if { [istarget "x86_64-*-linux*"] } {
362 insert_catch_syscall_with_arg $close_number
364 check_continue $close_number
369 proc test_catch_syscall_with_wrong_args_noxml {} {
374 # Even without XML support, GDB should not accept unknown
375 # syscall names for the catchpoint.
376 set thistest "Catch a nonsense syscall without XML support"
377 gdb_test "catch syscall nonsense_syscall" "Unknown syscall name .nonsense_syscall.*" $thistest
382 proc do_syscall_tests_without_xml {} {
383 global gdb_prompt srcdir
385 # In this case, we don't need to set GDB's datadir because
386 # we want GDB to display only numbers, not names. So, let's
387 # begin with the tests.
389 # The first test is to see if GDB displays a warning when we
390 # try to catch syscalls without the XML support.
391 test_catch_syscall_fail_noxml
393 # Now, let's test if we can catch syscalls without XML support.
394 # We should succeed, but GDB is not supposed to print syscall names.
395 if [runto_main] then { test_catch_syscall_without_args_noxml }
397 # The only valid argument "catch syscall" should accept is the
398 # syscall number, and not the name (since it can't translate a
401 # It's worth mentioning that we only try to catch the syscall
402 # close(). This is because the syscall number is an arch-dependent
403 # information, so we can't assume that we know every syscall number
404 # in this system. Therefore, we have decided to use a "long-estabilished"
405 # system call, and close() just sounded the right choice :-).
406 if [runto_main] then { test_catch_syscall_with_args_noxml }
408 # Now, we'll try to provide a syscall name (valid or not) to the command,
409 # and expect it to fail.
410 if [runto_main] then { test_catch_syscall_with_wrong_args_noxml }
413 # This procedure fills the vector "all_syscalls_numbers" with the proper
414 # numbers for the used syscalls according to the architecture.
415 proc fill_all_syscalls_numbers {} {
416 global all_syscalls_numbers
418 # For Linux on x86, PPC and PPC64, the numbers for the syscalls "close" and
419 # "chroot" are the same.
420 if { ![istarget "i\[34567\]86-*-linux*"]
421 || ![istarget "powerpc-*-linux*"] || ![istarget "powerpc64-*-linux*"] } {
422 set all_syscalls_numbers { "6" "61" }
426 # Start with a fresh gdb
430 gdb_reinitialize_dir $srcdir/$subdir
433 # Execute the tests, using XML support
440 gdb_reinitialize_dir $srcdir/$subdir
443 # Execute the tests, without XML support. In this case, GDB will
444 # only display syscall numbers, and not syscall names.
445 do_syscall_tests_without_xml