1 # Copyright 1998-2015 Free Software Foundation, Inc.
3 # This program is free software; you can redistribute it and/or modify
4 # it under the terms of the GNU General Public License as published by
5 # the Free Software Foundation; either version 3 of the License, or
6 # (at your option) any later version.
8 # This program is distributed in the hope that it will be useful,
9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 # GNU General Public License for more details.
13 # You should have received a copy of the GNU General Public License
14 # along with this program. If not, see <http://www.gnu.org/licenses/>.
16 # This file was written by Kendra.
19 # Test debugging assembly level programs.
20 # This file uses asmsrc[12].s for input.
27 set link-flags "-e _start"
30 set obj_include -I[standard_output_file {}]
32 switch -glob -- [istarget] {
35 # ??? Won't work with ecoff systems like Tru64, but then we also
36 # don't have any other -g flag that creates mdebug output.
37 set asm-flags "-no-mdebug -I${srcdir}/${subdir} $obj_include"
38 set debug-flags "-gdwarf-2"
57 set debug-flags "-gdwarf-2"
66 set asm-arch m32r-linux
73 append link-flags "--whole-archive -lgloss --no-whole-archive"
77 set asm-flags "-mshort-double -m68hc11 --no-warn -I${srcdir}/${subdir} $obj_include"
78 set debug-flags "-gdwarf-2"
79 # This asm test is specific and uses the linker directly.
80 # We must not use the target board linker script defined for other
81 # tests. Remove it and restore it later on.
82 set board [target_info name]
83 set old_ldscript [board_info $board ldscript]
84 unset_board_info "ldscript"
88 set asm-flags "-mshort-double -m68hc12 --no-warn -I${srcdir}/${subdir} $obj_include"
89 set debug-flags "-gdwarf-2"
90 # This asm test is specific and uses the linker directly.
91 # We must not use the target board linker script defined for other
92 # tests. Remove it and restore it later on.
93 set board [target_info name]
94 set old_ldscript [board_info $board ldscript]
95 set_board_info ldscript ""
101 set asm-arch powerpc64le
102 set asm-flags "-a64 -I${srcdir}/${subdir} $obj_include"
103 append link-flags " -m elf64lppc"
106 if { [is_lp64_target] } {
107 set asm-arch powerpc64
108 set asm-flags "-a64 -I${srcdir}/${subdir} $obj_include"
109 append link-flags " -m elf64ppc"
112 set asm-flags "-a32 -I${srcdir}/${subdir} $obj_include"
113 append link-flags " -m elf32ppc"
118 set debug-flags "-gdwarf-2"
125 set asm-flags "-xarch=v9 -I${srcdir}/${subdir} $obj_include"
126 set debug-flags "-gdwarf-2"
130 set asm-flags "-I${srcdir}/${subdir} $obj_include --no-warn"
131 set debug-flags "-gdwarf-2"
134 set asm-arch xstormy16
135 set debug-flags "-gdwarf-2"
139 set gdb_wrapper_initialized 1
146 set debug-flags "-gdwarf-2"
153 set debug-flags "-gdwarf-2"
157 set debug-flags "-gdwarf-2"
161 set debug-flags "-gdwarf-2"
165 set debug-flags "-gdwarf-2"
169 if { "${asm-arch}" == "" } {
170 untested asm-source.exp
174 # On NetBSD/ELF we need a special NetBSD-identifying note section.
175 if { [istarget "*-*-netbsdelf*"]
176 || [istarget "alpha-*-netbsd*"]
177 || [istarget "mips*-*-netbsd*"]
178 || [istarget "powerpc-*-netbsd*"]
179 || [istarget "x86_64-*-netbsd*"] } then {
180 set asm-note "netbsd"
183 # On OpenBSD/ELF we need a similar note section. We make no attempt
184 # of handing a.out here since most OpenBSD/a.out systems use a rather
185 # outdated assembler that doesn't assemble this test's code anyway.
186 if { [istarget "*-*-openbsd*"] } then {
187 set asm-note "openbsd"
190 # Watch out, we are invoking the assembler, but the testsuite sets multilib
191 # switches according to compiler syntax. If we pass these options straight
192 # to the assembler, they won't always make sense. If we don't pass them to
193 # the assembler, the final link will complain that the object files were
194 # built with different defaults. So no matter what we do, we lose. We may as
195 # well get out of this test sooner rather than later.
196 set dest [target_info name]
197 if [board_info $dest exists multilib_flags] {
198 set multilib_flags [board_info $dest multilib_flags]
199 if { "${multilib_flags}" != "" } {
200 untested asm-source.exp
206 standard_testfile asmsrc1.s asmsrc2.s
208 set arch_inc [standard_output_file arch.inc]
209 set note_inc [standard_output_file note.inc]
211 remote_exec build "rm -f $arch_inc"
212 remote_download host ${srcdir}/${subdir}/${asm-arch}.inc $arch_inc
213 remote_exec build "rm -f $note_inc"
214 remote_download host ${srcdir}/${subdir}/${asm-note}.inc $note_inc
216 if { [string equal ${asm-flags} ""] } {
217 set asm-flags "-I${srcdir}/${subdir} $obj_include"
220 if { [string equal ${debug-flags} ""] } {
221 set debug-flags "-gstabs"
224 # Allow the target board to override the debug flags.
225 if { [board_info $dest exists debug_flags] } then {
226 set debug-flags "[board_info $dest debug_flags]"
229 # The debug flags are in the format that gcc expects:
230 # "-gdwarf-2", "-gstabs+", or "-gstabs". To be compatible with the
231 # other languages in the test suite, we accept this input format.
232 # So the user can run the test suite with:
234 # runtest --target_board unix/gdb:debug_flags=-gdwarf-2
235 # make check RUNTESTFLAGS="--target_board unix/gdb:debug_flags=-gdwarf-2"
237 # However, the GNU assembler has different spellings than gcc.
238 # So I adjust the debug flags here.
240 # The GNU assembler spells "dwarf-2" as "dwarf2".
241 regsub "--" "-gdwarf-2" "${debug-flags}" "-gdwarf2" debug-flags
243 # The GNU assembler before 2.15 did not support "stabs+".
244 regsub "--" "-gstabs\[+\]" "${debug-flags}" "-gstabs" debug-flags
246 # The GNU assembler does not support level options like "-g2" or "-g3".
247 regsub "--" "-g\[0-9\]" "${debug-flags}" "" debug-flags
249 set asm1obj [standard_output_file asmrc1.o]
250 set asm2obj [standard_output_file asmrc2.o]
252 if {[target_assemble ${srcdir}/${subdir}/${srcfile} $asm1obj "${asm-flags} ${debug-flags}"] != ""} then {
253 untested asm-source.exp
256 if {[target_assemble ${srcdir}/${subdir}/${srcfile2} $asm2obj "${asm-flags} ${debug-flags}"] != ""} then {
257 untested asm-source.exp
261 # We deliberately don't use gdb_compile here to link together the
262 # assembled object files. Using gdb_compile, and therefore the C
263 # compiler, is conceptually wrong, since we're testing raw assembler
264 # code here that provides its own startup code. Using target_link
265 # also avoids a lot of problems on many systems, most notably on
266 # *-*-*bsd* and *-*-solaris2*.
267 if {[target_link [list $asm1obj $asm2obj] "${binfile}" ${link-flags}] != "" } then {
268 untested asm-source.exp
272 # Restore the target board linker script for HC11/HC12.
273 if { [istarget "m6811-*-*"] || [istarget "m6812-*-*"] } {
274 set_board_info ldscript $old_ldscript
277 # Collect some line numbers.
278 set line_main [expr [gdb_get_line_number "main start" "asmsrc1.s"] + 1]
279 set line_call_foo2 [expr [gdb_get_line_number "call foo2" "asmsrc1.s"] + 1]
280 set line_search_comment [expr [gdb_get_line_number "search" "asmsrc1.s"] + 1]
281 set line_foo3 [expr [gdb_get_line_number "foo3 start" "asmsrc1.s"] + 1]
282 set line_main_exit [expr [gdb_get_line_number "main exit" "asmsrc1.s"] + 1]
283 set line_foo2 [expr [gdb_get_line_number "foo2 start" "asmsrc2.s"] + 1]
284 set line_call_foo3 [expr [gdb_get_line_number "call foo3" "asmsrc2.s"] + 1]
285 set line_call_foo3_again [expr $line_call_foo3 + 1]
286 set line_foo2_leave [expr [gdb_get_line_number "foo2 leave" "asmsrc2.s"] + 1]
289 gdb_reinitialize_dir $srcdir/$subdir
293 # Run to `main' where we begin our tests.
296 if ![runto_main] then {
300 # Execute the `f' command and see if the result includes source info.
301 gdb_test "f" "asmsrc1\[.\]s:$line_main.*several_nops" "f at main"
303 # See if we properly `next' over a macro with several insns.
304 gdb_test "n" "$line_call_foo2\[ \]*.*foo2" "next over macro"
306 # See if we can properly `step' into a subroutine call.
307 gdb_test "s" "$line_foo2\[ \]*.*" "step into foo2"
309 # Test 'info target', and incidentally capture the entry point address.
311 gdb_test_multiple "info target" "info target" {
312 -re "Symbols from .*asm-source.*Entry point: 0x(\[01232456789abcdefABCDEF\]+).*$gdb_prompt $" {
313 set entry_point $expect_out(1,string)
318 # Capture the start symbol (may be '_start' or 'start')
320 gdb_test_multiple "info symbol 0x$entry_point" "info symbol" {
321 -re "info symbol 0x$entry_point\[\r\n\]+(\[^\r\n\]*) in section .*$gdb_prompt $" {
322 # We match the echoed `info symbol' command here, to help us
323 # reliably identify the beginning of the start symbol in the
324 # command's output. You might think we could just use '^' to
325 # start matching at the beginning of the line, but
326 # unfortunately, in Expect, '^' matches the beginning of the
327 # input that hasn't been matched by any expect clause yet. If
328 # every expect clause consumes a complete line, along with its
329 # terminating CR/LF, this is equivalent to the beginning of a
330 # line. But expect clauses that end with `.*' will consume as
331 # much as happened to arrive from the TTY --- exactly where
332 # they leave you depends on inter-process timing. :(
333 set entry_symbol $expect_out(1,string)
338 # Now try a 'list' from the other source file.
339 gdb_test "list $entry_symbol" ".*gdbasm_startup.*" "list"
341 # Now try a source file search
342 gdb_test "search A routine for foo2 to call" \
343 "$line_search_comment\[ \t\]+comment \"A routine for foo2 to call.\"" "search"
345 # See if `f' prints the right source file.
346 gdb_test "f" ".*asmsrc2\[.\]s:$line_foo2.*" "f in foo2"
348 # `next' one insn (or macro) to set up our stackframe (for the following bt).
349 gdb_test "n" "$line_call_foo3\[ \]*.*foo3" "n in foo2"
351 # See if a simple `bt' prints the right source files and
352 # doesn't fall off the stack.
355 "\#0.*foo2.*asmsrc2\[.\]s:$line_call_foo3.*\#1.*main.*asmsrc1\[.\]s:$line_call_foo2" \
358 # See if a capped `bt' prints the right source files.
359 gdb_test "bt 2" "\#0.*foo2.*asmsrc2\[.\]s:$line_call_foo3.*\#1.*main.*asmsrc1\[.\]s:$line_call_foo2.*" "bt 2 in foo2"
361 # Step into another subroutine which lives back in the first source file.
362 gdb_test "s" ".*" "s 2"
364 # Next over insns to set up the stack frame.
365 gdb_test "n" ".*" "n 2"
367 # Now see if a capped `bt' is correct.
368 gdb_test "bt 3" "\#0.*foo3.*asmsrc1\[.\]s:$line_foo3.*\#1.*foo2.*asmsrc2\[.\]s:$line_call_foo3.*\#2.*main.*asmsrc1\[.\]s:$line_call_foo2.*" "bt 3 in foo3"
370 # Try 'info source' from asmsrc1.s
371 gdb_test "info source" \
372 "Current source file is .*asmsrc1.s.*Source language is asm.*" \
373 "info source asmsrc1.s"
375 # Try 'finishing' from foo3
376 # Some architectures will have one or more instructions after the
377 # call instruction which still is part of the call sequence, so we
378 # must be prepared for a "finish" to show us the caller line
379 # again as well as the statement after.
380 gdb_test_multiple "finish" "finish from foo3" {
381 -re "Run till exit from.*\[\r\n\]$line_call_foo3\[ \t\]+gdbasm_call foo3.*$gdb_prompt $" {
382 pass "finish from foo3"
383 gdb_test "s" ".*" "s after finish"
385 -re "Run till exit from.*\[\r\n\]$line_call_foo3_again\[ \t\]+gdbasm_call foo3.*$gdb_prompt $" {
386 pass "finish from foo3"
390 # Try 'info source' from asmsrc2.s
391 gdb_test "info source" \
392 "Current source file is .*asmsrc2.s.*Source language is asm.*" \
393 "info source asmsrc2.s"
395 # Try 'info sources'. This can produce a lot of output on systems
396 # with dynamic linking, where the system's shared libc was compiled
397 # with debugging info; for example, on Linux, this produces 47kb of
398 # output. So we consume it as we go.
401 gdb_test_multiple "info sources" "info sources" {
402 -re "^\[^,\]*asmsrc1.s(, |\[\r\n\]+)" {
406 -re "^\[^,\]*asmsrc2.s(, |\[\r\n\]+)" {
413 -re "$gdb_prompt $" {
414 if {$seen_asmsrc_1 && $seen_asmsrc_2} {
424 gdb_test "info line" \
425 "Line $line_call_foo3_again of.*asmsrc2.s.*starts at.*<\\.?foo2+.*> and ends at.*<\\.?foo2+.*>." \
428 # Try 'nexting' over next call to foo3
429 gdb_test "next" "$line_foo2_leave\[ \t\]+gdbasm_leave" "next over foo3"
431 # Try 'return' from foo2
432 # Like "finish", "return" command also can return to the caller
433 # line again or the statement after, depending on the architecture.
434 gdb_test_multiple "return" "return from foo2" {
435 -re "Make (foo2|selected stack frame) return now\?.*" {
439 -re "\#0.*main .*$line_call_foo2\[ \t\]+gdbasm_call foo2.*$gdb_prompt $" {
440 pass "return from foo2"
441 gdb_test "s" ".*" "s after return"
443 -re "\#0.*main .*$line_main_exit\[ \t\]+gdbasm_exit0.*$gdb_prompt $" {
444 pass "return from foo2"
448 # Disassemble something, check the output
449 proc test_dis { command var } {
451 gdb_test_multiple "${command}" "${command}" {
452 -re "${var}.*:.*(Cannot access|Bad address)" {
453 # The "disassembler" was only accessing the local
454 # executable and that would cause attempts to disassemble
455 # variables to fail (memory not valid).
456 fail "${command} (memory read error)"
458 -re "${var}.*:.*${gdb_prompt}" {
464 # See if we can look at a global variable, three ways
465 gdb_test "print globalvar" ".* = 11" "look at global variable"
466 test_dis "x/i &globalvar" "globalvar"
467 test_dis "disassem &globalvar, &globalvar+1" "globalvar"
469 # See if we can look at a static variable, three ways
470 gdb_test "print staticvar" ".* = 5" "look at static variable"
471 test_dis "x/i &staticvar" "staticvar"
472 test_dis "disassem &staticvar, &staticvar+1" "staticvar"
474 # See if we can look at a static function
475 gdb_test "disassem foostatic" ".*<\\+0>:.*End of assembler dump." \
476 "look at static function"
478 remote_exec build "rm -f $arch_inc"
479 remote_exec build "rm -f $note_inc"