1 /* Interface between GDB and target environments, including files and processes
2 Copyright 1990, 91, 92, 93, 94, 1999 Free Software Foundation, Inc.
3 Contributed by Cygnus Support. Written by John Gilmore.
5 This file is part of GDB.
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 59 Temple Place - Suite 330,
20 Boston, MA 02111-1307, USA. */
22 #if !defined (TARGET_H)
25 /* This include file defines the interface between the main part
26 of the debugger, and the part which is target-specific, or
27 specific to the communications interface between us and the
30 A TARGET is an interface between the debugger and a particular
31 kind of file or process. Targets can be STACKED in STRATA,
32 so that more than one target can potentially respond to a request.
33 In particular, memory accesses will walk down the stack of targets
34 until they find a target that is interested in handling that particular
35 address. STRATA are artificial boundaries on the stack, within
36 which particular kinds of targets live. Strata exist so that
37 people don't get confused by pushing e.g. a process target and then
38 a file target, and wondering why they can't see the current values
39 of variables any more (the file target is handling them and they
40 never get to the process target). So when you push a file target,
41 it goes into the file stratum, which is always below the process
49 dummy_stratum, /* The lowest of the low */
50 file_stratum, /* Executable files, etc */
51 core_stratum, /* Core dump files */
52 download_stratum, /* Downloading of remote targets */
53 process_stratum, /* Executing processes */
54 thread_stratum /* Executing threads */
57 enum thread_control_capabilities
59 tc_none = 0, /* Default: can't control thread execution. */
60 tc_schedlock = 1, /* Can lock the thread scheduler. */
61 tc_switch = 2 /* Can switch the running thread on demand. */
64 /* Stuff for target_wait. */
66 /* Generally, what has the program done? */
69 /* The program has exited. The exit status is in value.integer. */
70 TARGET_WAITKIND_EXITED,
72 /* The program has stopped with a signal. Which signal is in value.sig. */
73 TARGET_WAITKIND_STOPPED,
75 /* The program has terminated with a signal. Which signal is in
77 TARGET_WAITKIND_SIGNALLED,
79 /* The program is letting us know that it dynamically loaded something
80 (e.g. it called load(2) on AIX). */
81 TARGET_WAITKIND_LOADED,
83 /* The program has forked. A "related" process' ID is in value.related_pid.
84 I.e., if the child forks, value.related_pid is the parent's ID.
86 TARGET_WAITKIND_FORKED,
88 /* The program has vforked. A "related" process's ID is in value.related_pid.
90 TARGET_WAITKIND_VFORKED,
92 /* The program has exec'ed a new executable file. The new file's pathname
93 is pointed to by value.execd_pathname.
95 TARGET_WAITKIND_EXECD,
97 /* The program has entered or returned from a system call. On HP-UX, this
98 is used in the hardware watchpoint implementation. The syscall's unique
99 integer ID number is in value.syscall_id;
101 TARGET_WAITKIND_SYSCALL_ENTRY,
102 TARGET_WAITKIND_SYSCALL_RETURN,
104 /* Nothing happened, but we stopped anyway. This perhaps should be handled
105 within target_wait, but I'm not sure target_wait should be resuming the
107 TARGET_WAITKIND_SPURIOUS
110 /* The numbering of these signals is chosen to match traditional unix
111 signals (insofar as various unices use the same numbers, anyway).
112 It is also the numbering of the GDB remote protocol. Other remote
113 protocols, if they use a different numbering, should make sure to
114 translate appropriately.
116 Since these numbers have actually made it out into other software
117 (stubs, etc.), you mustn't disturb the assigned numbering. If you
118 need to add new signals here, add them to the end of the explicitly
121 This is based strongly on Unix/POSIX signals for several reasons:
122 (1) This set of signals represents a widely-accepted attempt to
123 represent events of this sort in a portable fashion, (2) we want a
124 signal to make it from wait to child_wait to the user intact, (3) many
125 remote protocols use a similar encoding. However, it is
126 recognized that this set of signals has limitations (such as not
127 distinguishing between various kinds of SIGSEGV, or not
128 distinguishing hitting a breakpoint from finishing a single step).
129 So in the future we may get around this either by adding additional
130 signals for breakpoint, single-step, etc., or by adding signal
131 codes; the latter seems more in the spirit of what BSD, System V,
132 etc. are doing to address these issues. */
134 /* For an explanation of what each signal means, see
135 target_signal_to_string. */
139 /* Used some places (e.g. stop_signal) to record the concept that
140 there is no signal. */
142 TARGET_SIGNAL_FIRST = 0,
143 TARGET_SIGNAL_HUP = 1,
144 TARGET_SIGNAL_INT = 2,
145 TARGET_SIGNAL_QUIT = 3,
146 TARGET_SIGNAL_ILL = 4,
147 TARGET_SIGNAL_TRAP = 5,
148 TARGET_SIGNAL_ABRT = 6,
149 TARGET_SIGNAL_EMT = 7,
150 TARGET_SIGNAL_FPE = 8,
151 TARGET_SIGNAL_KILL = 9,
152 TARGET_SIGNAL_BUS = 10,
153 TARGET_SIGNAL_SEGV = 11,
154 TARGET_SIGNAL_SYS = 12,
155 TARGET_SIGNAL_PIPE = 13,
156 TARGET_SIGNAL_ALRM = 14,
157 TARGET_SIGNAL_TERM = 15,
158 TARGET_SIGNAL_URG = 16,
159 TARGET_SIGNAL_STOP = 17,
160 TARGET_SIGNAL_TSTP = 18,
161 TARGET_SIGNAL_CONT = 19,
162 TARGET_SIGNAL_CHLD = 20,
163 TARGET_SIGNAL_TTIN = 21,
164 TARGET_SIGNAL_TTOU = 22,
165 TARGET_SIGNAL_IO = 23,
166 TARGET_SIGNAL_XCPU = 24,
167 TARGET_SIGNAL_XFSZ = 25,
168 TARGET_SIGNAL_VTALRM = 26,
169 TARGET_SIGNAL_PROF = 27,
170 TARGET_SIGNAL_WINCH = 28,
171 TARGET_SIGNAL_LOST = 29,
172 TARGET_SIGNAL_USR1 = 30,
173 TARGET_SIGNAL_USR2 = 31,
174 TARGET_SIGNAL_PWR = 32,
175 /* Similar to SIGIO. Perhaps they should have the same number. */
176 TARGET_SIGNAL_POLL = 33,
177 TARGET_SIGNAL_WIND = 34,
178 TARGET_SIGNAL_PHONE = 35,
179 TARGET_SIGNAL_WAITING = 36,
180 TARGET_SIGNAL_LWP = 37,
181 TARGET_SIGNAL_DANGER = 38,
182 TARGET_SIGNAL_GRANT = 39,
183 TARGET_SIGNAL_RETRACT = 40,
184 TARGET_SIGNAL_MSG = 41,
185 TARGET_SIGNAL_SOUND = 42,
186 TARGET_SIGNAL_SAK = 43,
187 TARGET_SIGNAL_PRIO = 44,
188 TARGET_SIGNAL_REALTIME_33 = 45,
189 TARGET_SIGNAL_REALTIME_34 = 46,
190 TARGET_SIGNAL_REALTIME_35 = 47,
191 TARGET_SIGNAL_REALTIME_36 = 48,
192 TARGET_SIGNAL_REALTIME_37 = 49,
193 TARGET_SIGNAL_REALTIME_38 = 50,
194 TARGET_SIGNAL_REALTIME_39 = 51,
195 TARGET_SIGNAL_REALTIME_40 = 52,
196 TARGET_SIGNAL_REALTIME_41 = 53,
197 TARGET_SIGNAL_REALTIME_42 = 54,
198 TARGET_SIGNAL_REALTIME_43 = 55,
199 TARGET_SIGNAL_REALTIME_44 = 56,
200 TARGET_SIGNAL_REALTIME_45 = 57,
201 TARGET_SIGNAL_REALTIME_46 = 58,
202 TARGET_SIGNAL_REALTIME_47 = 59,
203 TARGET_SIGNAL_REALTIME_48 = 60,
204 TARGET_SIGNAL_REALTIME_49 = 61,
205 TARGET_SIGNAL_REALTIME_50 = 62,
206 TARGET_SIGNAL_REALTIME_51 = 63,
207 TARGET_SIGNAL_REALTIME_52 = 64,
208 TARGET_SIGNAL_REALTIME_53 = 65,
209 TARGET_SIGNAL_REALTIME_54 = 66,
210 TARGET_SIGNAL_REALTIME_55 = 67,
211 TARGET_SIGNAL_REALTIME_56 = 68,
212 TARGET_SIGNAL_REALTIME_57 = 69,
213 TARGET_SIGNAL_REALTIME_58 = 70,
214 TARGET_SIGNAL_REALTIME_59 = 71,
215 TARGET_SIGNAL_REALTIME_60 = 72,
216 TARGET_SIGNAL_REALTIME_61 = 73,
217 TARGET_SIGNAL_REALTIME_62 = 74,
218 TARGET_SIGNAL_REALTIME_63 = 75,
220 /* Used internally by Solaris threads. See signal(5) on Solaris. */
221 TARGET_SIGNAL_CANCEL = 76,
223 /* Yes, this pains me, too. But LynxOS didn't have SIG32, and now
224 Linux does, and we can't disturb the numbering, since it's part
225 of the protocol. Note that in some GDB's TARGET_SIGNAL_REALTIME_32
227 TARGET_SIGNAL_REALTIME_32,
229 #if defined(MACH) || defined(__MACH__)
230 /* Mach exceptions */
231 TARGET_EXC_BAD_ACCESS,
232 TARGET_EXC_BAD_INSTRUCTION,
233 TARGET_EXC_ARITHMETIC,
234 TARGET_EXC_EMULATION,
236 TARGET_EXC_BREAKPOINT,
240 /* Some signal we don't know about. */
241 TARGET_SIGNAL_UNKNOWN,
243 /* Use whatever signal we use when one is not specifically specified
244 (for passing to proceed and so on). */
245 TARGET_SIGNAL_DEFAULT,
247 /* Last and unused enum value, for sizing arrays, etc. */
251 struct target_waitstatus
253 enum target_waitkind kind;
255 /* Forked child pid, execd pathname, exit status or signal number. */
259 enum target_signal sig;
261 char *execd_pathname;
267 /* Possible types of events that the inferior handler will have to
269 enum inferior_event_type
271 /* There is a request to quit the inferior, abandon it. */
273 /* Process a normal inferior event which will result in target_wait
276 /* Deal with an error on the inferior. */
278 /* We are called because a timer went off. */
280 /* We are called to do stuff after the inferior stops. */
284 /* Return the string for a signal. */
285 extern char *target_signal_to_string PARAMS ((enum target_signal));
287 /* Return the name (SIGHUP, etc.) for a signal. */
288 extern char *target_signal_to_name PARAMS ((enum target_signal));
290 /* Given a name (SIGHUP, etc.), return its signal. */
291 enum target_signal target_signal_from_name PARAMS ((char *));
294 /* If certain kinds of activity happen, target_wait should perform
296 /* Right now we just call (*TARGET_ACTIVITY_FUNCTION) if I/O is possible
297 on TARGET_ACTIVITY_FD. */
298 extern int target_activity_fd;
299 /* Returns zero to leave the inferior alone, one to interrupt it. */
300 extern int (*target_activity_function) PARAMS ((void));
304 char *to_shortname; /* Name this target type */
305 char *to_longname; /* Name for printing */
306 char *to_doc; /* Documentation. Does not include trailing
307 newline, and starts with a one-line descrip-
308 tion (probably similar to to_longname). */
309 void (*to_open) PARAMS ((char *, int));
310 void (*to_close) PARAMS ((int));
311 void (*to_attach) PARAMS ((char *, int));
312 void (*to_post_attach) PARAMS ((int));
313 void (*to_require_attach) PARAMS ((char *, int));
314 void (*to_detach) PARAMS ((char *, int));
315 void (*to_require_detach) PARAMS ((int, char *, int));
316 void (*to_resume) PARAMS ((int, int, enum target_signal));
317 int (*to_wait) PARAMS ((int, struct target_waitstatus *));
318 void (*to_post_wait) PARAMS ((int, int));
319 void (*to_fetch_registers) PARAMS ((int));
320 void (*to_store_registers) PARAMS ((int));
321 void (*to_prepare_to_store) PARAMS ((void));
323 /* Transfer LEN bytes of memory between GDB address MYADDR and
324 target address MEMADDR. If WRITE, transfer them to the target, else
325 transfer them from the target. TARGET is the target from which we
328 Return value, N, is one of the following:
330 0 means that we can't handle this. If errno has been set, it is the
331 error which prevented us from doing it (FIXME: What about bfd_error?).
333 positive (call it N) means that we have transferred N bytes
334 starting at MEMADDR. We might be able to handle more bytes
335 beyond this length, but no promises.
337 negative (call its absolute value N) means that we cannot
338 transfer right at MEMADDR, but we could transfer at least
339 something at MEMADDR + N. */
341 int (*to_xfer_memory) PARAMS ((CORE_ADDR memaddr, char *myaddr,
343 struct target_ops * target));
346 /* Enable this after 4.12. */
348 /* Search target memory. Start at STARTADDR and take LEN bytes of
349 target memory, and them with MASK, and compare to DATA. If they
350 match, set *ADDR_FOUND to the address we found it at, store the data
351 we found at LEN bytes starting at DATA_FOUND, and return. If
352 not, add INCREMENT to the search address and keep trying until
353 the search address is outside of the range [LORANGE,HIRANGE).
355 If we don't find anything, set *ADDR_FOUND to (CORE_ADDR)0 and return. */
356 void (*to_search) PARAMS ((int len, char *data, char *mask,
357 CORE_ADDR startaddr, int increment,
358 CORE_ADDR lorange, CORE_ADDR hirange,
359 CORE_ADDR * addr_found, char *data_found));
361 #define target_search(len, data, mask, startaddr, increment, lorange, hirange, addr_found, data_found) \
362 (*current_target.to_search) (len, data, mask, startaddr, increment, \
363 lorange, hirange, addr_found, data_found)
366 void (*to_files_info) PARAMS ((struct target_ops *));
367 int (*to_insert_breakpoint) PARAMS ((CORE_ADDR, char *));
368 int (*to_remove_breakpoint) PARAMS ((CORE_ADDR, char *));
369 void (*to_terminal_init) PARAMS ((void));
370 void (*to_terminal_inferior) PARAMS ((void));
371 void (*to_terminal_ours_for_output) PARAMS ((void));
372 void (*to_terminal_ours) PARAMS ((void));
373 void (*to_terminal_info) PARAMS ((char *, int));
374 void (*to_kill) PARAMS ((void));
375 void (*to_load) PARAMS ((char *, int));
376 int (*to_lookup_symbol) PARAMS ((char *, CORE_ADDR *));
377 void (*to_create_inferior) PARAMS ((char *, char *, char **));
378 void (*to_post_startup_inferior) PARAMS ((int));
379 void (*to_acknowledge_created_inferior) PARAMS ((int));
380 void (*to_clone_and_follow_inferior) PARAMS ((int, int *));
381 void (*to_post_follow_inferior_by_clone) PARAMS ((void));
382 int (*to_insert_fork_catchpoint) PARAMS ((int));
383 int (*to_remove_fork_catchpoint) PARAMS ((int));
384 int (*to_insert_vfork_catchpoint) PARAMS ((int));
385 int (*to_remove_vfork_catchpoint) PARAMS ((int));
386 int (*to_has_forked) PARAMS ((int, int *));
387 int (*to_has_vforked) PARAMS ((int, int *));
388 int (*to_can_follow_vfork_prior_to_exec) PARAMS ((void));
389 void (*to_post_follow_vfork) PARAMS ((int, int, int, int));
390 int (*to_insert_exec_catchpoint) PARAMS ((int));
391 int (*to_remove_exec_catchpoint) PARAMS ((int));
392 int (*to_has_execd) PARAMS ((int, char **));
393 int (*to_reported_exec_events_per_exec_call) PARAMS ((void));
394 int (*to_has_syscall_event) PARAMS ((int, enum target_waitkind *, int *));
395 int (*to_has_exited) PARAMS ((int, int, int *));
396 void (*to_mourn_inferior) PARAMS ((void));
397 int (*to_can_run) PARAMS ((void));
398 void (*to_notice_signals) PARAMS ((int pid));
399 int (*to_thread_alive) PARAMS ((int pid));
400 void (*to_find_new_threads) PARAMS ((void));
401 void (*to_stop) PARAMS ((void));
402 int (*to_query) PARAMS ((int /*char */ , char *, char *, int *));
403 void (*to_rcmd) (char *command, struct gdb_file *output);
404 struct symtab_and_line *(*to_enable_exception_callback) PARAMS ((enum exception_event_kind, int));
405 struct exception_event_record *(*to_get_current_exception_event) PARAMS ((void));
406 char *(*to_pid_to_exec_file) PARAMS ((int pid));
407 char *(*to_core_file_to_sym_file) PARAMS ((char *));
408 enum strata to_stratum;
410 *DONT_USE; /* formerly to_next */
411 int to_has_all_memory;
414 int to_has_registers;
415 int to_has_execution;
416 int to_has_thread_control; /* control thread execution */
421 /* ASYNC target controls */
422 int (*to_can_async_p) (void);
423 int (*to_is_async_p) (void);
424 void (*to_async) (void (*cb) (enum inferior_event_type, void *context), void *context);
426 /* Need sub-structure for target machine related rather than comm related? */
429 /* Magic number for checking ops size. If a struct doesn't end with this
430 number, somebody changed the declaration but didn't change all the
431 places that initialize one. */
433 #define OPS_MAGIC 3840
435 /* The ops structure for our "current" target process. This should
436 never be NULL. If there is no target, it points to the dummy_target. */
438 extern struct target_ops current_target;
440 /* An item on the target stack. */
442 struct target_stack_item
444 struct target_stack_item *next;
445 struct target_ops *target_ops;
448 /* The target stack. */
450 extern struct target_stack_item *target_stack;
452 /* Define easy words for doing these operations on our current target. */
454 #define target_shortname (current_target.to_shortname)
455 #define target_longname (current_target.to_longname)
457 /* The open routine takes the rest of the parameters from the command,
458 and (if successful) pushes a new target onto the stack.
459 Targets should supply this routine, if only to provide an error message. */
460 #define target_open(name, from_tty) \
461 (*current_target.to_open) (name, from_tty)
463 /* Does whatever cleanup is required for a target that we are no longer
464 going to be calling. Argument says whether we are quitting gdb and
465 should not get hung in case of errors, or whether we want a clean
466 termination even if it takes a while. This routine is automatically
467 always called just before a routine is popped off the target stack.
468 Closing file descriptors and freeing memory are typical things it should
471 #define target_close(quitting) \
472 (*current_target.to_close) (quitting)
474 /* Attaches to a process on the target side. Arguments are as passed
475 to the `attach' command by the user. This routine can be called
476 when the target is not on the target-stack, if the target_can_run
477 routine returns 1; in that case, it must push itself onto the stack.
478 Upon exit, the target should be ready for normal operations, and
479 should be ready to deliver the status of the process immediately
480 (without waiting) to an upcoming target_wait call. */
482 #define target_attach(args, from_tty) \
483 (*current_target.to_attach) (args, from_tty)
485 /* The target_attach operation places a process under debugger control,
486 and stops the process.
488 This operation provides a target-specific hook that allows the
489 necessary bookkeeping to be performed after an attach completes.
491 #define target_post_attach(pid) \
492 (*current_target.to_post_attach) (pid)
494 /* Attaches to a process on the target side, if not already attached.
495 (If already attached, takes no action.)
497 This operation can be used to follow the child process of a fork.
498 On some targets, such child processes of an original inferior process
499 are automatically under debugger control, and thus do not require an
500 actual attach operation. */
502 #define target_require_attach(args, from_tty) \
503 (*current_target.to_require_attach) (args, from_tty)
505 /* Takes a program previously attached to and detaches it.
506 The program may resume execution (some targets do, some don't) and will
507 no longer stop on signals, etc. We better not have left any breakpoints
508 in the program or it'll die when it hits one. ARGS is arguments
509 typed by the user (e.g. a signal to send the process). FROM_TTY
510 says whether to be verbose or not. */
513 target_detach PARAMS ((char *, int));
515 /* Detaches from a process on the target side, if not already dettached.
516 (If already detached, takes no action.)
518 This operation can be used to follow the parent process of a fork.
519 On some targets, such child processes of an original inferior process
520 are automatically under debugger control, and thus do require an actual
523 PID is the process id of the child to detach from.
524 ARGS is arguments typed by the user (e.g. a signal to send the process).
525 FROM_TTY says whether to be verbose or not. */
527 #define target_require_detach(pid, args, from_tty) \
528 (*current_target.to_require_detach) (pid, args, from_tty)
530 /* Resume execution of the target process PID. STEP says whether to
531 single-step or to run free; SIGGNAL is the signal to be given to
532 the target, or TARGET_SIGNAL_0 for no signal. The caller may not
533 pass TARGET_SIGNAL_DEFAULT. */
535 #define target_resume(pid, step, siggnal) \
536 (*current_target.to_resume) (pid, step, siggnal)
538 /* Wait for process pid to do something. Pid = -1 to wait for any pid
539 to do something. Return pid of child, or -1 in case of error;
540 store status through argument pointer STATUS. Note that it is
541 *not* OK to return_to_top_level out of target_wait without popping
542 the debugging target from the stack; GDB isn't prepared to get back
543 to the prompt with a debugging target but without the frame cache,
544 stop_pc, etc., set up. */
546 #define target_wait(pid, status) \
547 (*current_target.to_wait) (pid, status)
549 /* The target_wait operation waits for a process event to occur, and
550 thereby stop the process.
552 On some targets, certain events may happen in sequences. gdb's
553 correct response to any single event of such a sequence may require
554 knowledge of what earlier events in the sequence have been seen.
556 This operation provides a target-specific hook that allows the
557 necessary bookkeeping to be performed to track such sequences.
560 #define target_post_wait(pid, status) \
561 (*current_target.to_post_wait) (pid, status)
563 /* Fetch register REGNO, or all regs if regno == -1. No result. */
565 #define target_fetch_registers(regno) \
566 (*current_target.to_fetch_registers) (regno)
568 /* Store at least register REGNO, or all regs if REGNO == -1.
569 It can store as many registers as it wants to, so target_prepare_to_store
570 must have been previously called. Calls error() if there are problems. */
572 #define target_store_registers(regs) \
573 (*current_target.to_store_registers) (regs)
575 /* Get ready to modify the registers array. On machines which store
576 individual registers, this doesn't need to do anything. On machines
577 which store all the registers in one fell swoop, this makes sure
578 that REGISTERS contains all the registers from the program being
581 #define target_prepare_to_store() \
582 (*current_target.to_prepare_to_store) ()
584 extern int target_read_string PARAMS ((CORE_ADDR, char **, int, int *));
587 target_read_memory PARAMS ((CORE_ADDR memaddr, char *myaddr, int len));
590 target_read_memory_section PARAMS ((CORE_ADDR memaddr, char *myaddr, int len,
591 asection * bfd_section));
594 target_write_memory PARAMS ((CORE_ADDR, char *, int));
597 xfer_memory PARAMS ((CORE_ADDR, char *, int, int, struct target_ops *));
600 child_xfer_memory PARAMS ((CORE_ADDR, char *, int, int, struct target_ops *));
602 /* Make a single attempt at transfering LEN bytes. On a successful
603 transfer, the number of bytes actually transfered is returned and
604 ERR is set to 0. When a transfer fails, -1 is returned (the number
605 of bytes actually transfered is not defined) and ERR is set to a
606 non-zero error indication. */
608 extern int target_read_memory_partial (CORE_ADDR addr, char *buf, int len, int *err);
610 extern int target_write_memory_partial (CORE_ADDR addr, char *buf, int len, int *err);
613 child_pid_to_exec_file PARAMS ((int));
616 child_core_file_to_sym_file PARAMS ((char *));
618 #if defined(CHILD_POST_ATTACH)
620 child_post_attach PARAMS ((int));
624 child_post_wait PARAMS ((int, int));
627 child_post_startup_inferior PARAMS ((int));
630 child_acknowledge_created_inferior PARAMS ((int));
633 child_clone_and_follow_inferior PARAMS ((int, int *));
636 child_post_follow_inferior_by_clone PARAMS ((void));
639 child_insert_fork_catchpoint PARAMS ((int));
642 child_remove_fork_catchpoint PARAMS ((int));
645 child_insert_vfork_catchpoint PARAMS ((int));
648 child_remove_vfork_catchpoint PARAMS ((int));
651 child_has_forked PARAMS ((int, int *));
654 child_has_vforked PARAMS ((int, int *));
657 child_acknowledge_created_inferior PARAMS ((int));
660 child_can_follow_vfork_prior_to_exec PARAMS ((void));
663 child_post_follow_vfork PARAMS ((int, int, int, int));
666 child_insert_exec_catchpoint PARAMS ((int));
669 child_remove_exec_catchpoint PARAMS ((int));
672 child_has_execd PARAMS ((int, char **));
675 child_reported_exec_events_per_exec_call PARAMS ((void));
678 child_has_syscall_event PARAMS ((int, enum target_waitkind *, int *));
681 child_has_exited PARAMS ((int, int, int *));
684 child_thread_alive PARAMS ((int));
689 print_section_info PARAMS ((struct target_ops *, bfd *));
691 /* Print a line about the current target. */
693 #define target_files_info() \
694 (*current_target.to_files_info) (¤t_target)
696 /* Insert a breakpoint at address ADDR in the target machine.
697 SAVE is a pointer to memory allocated for saving the
698 target contents. It is guaranteed by the caller to be long enough
699 to save "sizeof BREAKPOINT" bytes. Result is 0 for success, or
702 #define target_insert_breakpoint(addr, save) \
703 (*current_target.to_insert_breakpoint) (addr, save)
705 /* Remove a breakpoint at address ADDR in the target machine.
706 SAVE is a pointer to the same save area
707 that was previously passed to target_insert_breakpoint.
708 Result is 0 for success, or an errno value. */
710 #define target_remove_breakpoint(addr, save) \
711 (*current_target.to_remove_breakpoint) (addr, save)
713 /* Initialize the terminal settings we record for the inferior,
714 before we actually run the inferior. */
716 #define target_terminal_init() \
717 (*current_target.to_terminal_init) ()
719 /* Put the inferior's terminal settings into effect.
720 This is preparation for starting or resuming the inferior. */
722 #define target_terminal_inferior() \
723 (*current_target.to_terminal_inferior) ()
725 /* Put some of our terminal settings into effect,
726 enough to get proper results from our output,
727 but do not change into or out of RAW mode
728 so that no input is discarded.
730 After doing this, either terminal_ours or terminal_inferior
731 should be called to get back to a normal state of affairs. */
733 #define target_terminal_ours_for_output() \
734 (*current_target.to_terminal_ours_for_output) ()
736 /* Put our terminal settings into effect.
737 First record the inferior's terminal settings
738 so they can be restored properly later. */
740 #define target_terminal_ours() \
741 (*current_target.to_terminal_ours) ()
743 /* Print useful information about our terminal status, if such a thing
746 #define target_terminal_info(arg, from_tty) \
747 (*current_target.to_terminal_info) (arg, from_tty)
749 /* Kill the inferior process. Make it go away. */
751 #define target_kill() \
752 (*current_target.to_kill) ()
754 /* Load an executable file into the target process. This is expected to
755 not only bring new code into the target process, but also to update
756 GDB's symbol tables to match. */
758 #define target_load(arg, from_tty) \
759 (*current_target.to_load) (arg, from_tty)
761 /* Look up a symbol in the target's symbol table. NAME is the symbol
762 name. ADDRP is a CORE_ADDR * pointing to where the value of the symbol
763 should be returned. The result is 0 if successful, nonzero if the
764 symbol does not exist in the target environment. This function should
765 not call error() if communication with the target is interrupted, since
766 it is called from symbol reading, but should return nonzero, possibly
767 doing a complain(). */
769 #define target_lookup_symbol(name, addrp) \
770 (*current_target.to_lookup_symbol) (name, addrp)
772 /* Start an inferior process and set inferior_pid to its pid.
773 EXEC_FILE is the file to run.
774 ALLARGS is a string containing the arguments to the program.
775 ENV is the environment vector to pass. Errors reported with error().
776 On VxWorks and various standalone systems, we ignore exec_file. */
778 #define target_create_inferior(exec_file, args, env) \
779 (*current_target.to_create_inferior) (exec_file, args, env)
782 /* Some targets (such as ttrace-based HPUX) don't allow us to request
783 notification of inferior events such as fork and vork immediately
784 after the inferior is created. (This because of how gdb gets an
785 inferior created via invoking a shell to do it. In such a scenario,
786 if the shell init file has commands in it, the shell will fork and
787 exec for each of those commands, and we will see each such fork
790 Such targets will supply an appropriate definition for this function.
792 #define target_post_startup_inferior(pid) \
793 (*current_target.to_post_startup_inferior) (pid)
795 /* On some targets, the sequence of starting up an inferior requires
796 some synchronization between gdb and the new inferior process, PID.
798 #define target_acknowledge_created_inferior(pid) \
799 (*current_target.to_acknowledge_created_inferior) (pid)
801 /* An inferior process has been created via a fork() or similar
802 system call. This function will clone the debugger, then ensure
803 that CHILD_PID is attached to by that debugger.
805 FOLLOWED_CHILD is set TRUE on return *for the clone debugger only*,
806 and FALSE otherwise. (The original and clone debuggers can use this
807 to determine which they are, if need be.)
809 (This is not a terribly useful feature without a GUI to prevent
810 the two debuggers from competing for shell input.)
812 #define target_clone_and_follow_inferior(child_pid,followed_child) \
813 (*current_target.to_clone_and_follow_inferior) (child_pid, followed_child)
815 /* This operation is intended to be used as the last in a sequence of
816 steps taken when following both parent and child of a fork. This
817 is used by a clone of the debugger, which will follow the child.
819 The original debugger has detached from this process, and the
820 clone has attached to it.
822 On some targets, this requires a bit of cleanup to make it work
825 #define target_post_follow_inferior_by_clone() \
826 (*current_target.to_post_follow_inferior_by_clone) ()
828 /* On some targets, we can catch an inferior fork or vfork event when it
829 occurs. These functions insert/remove an already-created catchpoint for
832 #define target_insert_fork_catchpoint(pid) \
833 (*current_target.to_insert_fork_catchpoint) (pid)
835 #define target_remove_fork_catchpoint(pid) \
836 (*current_target.to_remove_fork_catchpoint) (pid)
838 #define target_insert_vfork_catchpoint(pid) \
839 (*current_target.to_insert_vfork_catchpoint) (pid)
841 #define target_remove_vfork_catchpoint(pid) \
842 (*current_target.to_remove_vfork_catchpoint) (pid)
844 /* Returns TRUE if PID has invoked the fork() system call. And,
845 also sets CHILD_PID to the process id of the other ("child")
846 inferior process that was created by that call.
848 #define target_has_forked(pid,child_pid) \
849 (*current_target.to_has_forked) (pid,child_pid)
851 /* Returns TRUE if PID has invoked the vfork() system call. And,
852 also sets CHILD_PID to the process id of the other ("child")
853 inferior process that was created by that call.
855 #define target_has_vforked(pid,child_pid) \
856 (*current_target.to_has_vforked) (pid,child_pid)
858 /* Some platforms (such as pre-10.20 HP-UX) don't allow us to do
859 anything to a vforked child before it subsequently calls exec().
860 On such platforms, we say that the debugger cannot "follow" the
861 child until it has vforked.
863 This function should be defined to return 1 by those targets
864 which can allow the debugger to immediately follow a vforked
865 child, and 0 if they cannot.
867 #define target_can_follow_vfork_prior_to_exec() \
868 (*current_target.to_can_follow_vfork_prior_to_exec) ()
870 /* An inferior process has been created via a vfork() system call.
871 The debugger has followed the parent, the child, or both. The
872 process of setting up for that follow may have required some
873 target-specific trickery to track the sequence of reported events.
874 If so, this function should be defined by those targets that
875 require the debugger to perform cleanup or initialization after
878 #define target_post_follow_vfork(parent_pid,followed_parent,child_pid,followed_child) \
879 (*current_target.to_post_follow_vfork) (parent_pid,followed_parent,child_pid,followed_child)
881 /* On some targets, we can catch an inferior exec event when it
882 occurs. These functions insert/remove an already-created catchpoint
885 #define target_insert_exec_catchpoint(pid) \
886 (*current_target.to_insert_exec_catchpoint) (pid)
888 #define target_remove_exec_catchpoint(pid) \
889 (*current_target.to_remove_exec_catchpoint) (pid)
891 /* Returns TRUE if PID has invoked a flavor of the exec() system call.
892 And, also sets EXECD_PATHNAME to the pathname of the executable file
893 that was passed to exec(), and is now being executed.
895 #define target_has_execd(pid,execd_pathname) \
896 (*current_target.to_has_execd) (pid,execd_pathname)
898 /* Returns the number of exec events that are reported when a process
899 invokes a flavor of the exec() system call on this target, if exec
900 events are being reported.
902 #define target_reported_exec_events_per_exec_call() \
903 (*current_target.to_reported_exec_events_per_exec_call) ()
905 /* Returns TRUE if PID has reported a syscall event. And, also sets
906 KIND to the appropriate TARGET_WAITKIND_, and sets SYSCALL_ID to
907 the unique integer ID of the syscall.
909 #define target_has_syscall_event(pid,kind,syscall_id) \
910 (*current_target.to_has_syscall_event) (pid,kind,syscall_id)
912 /* Returns TRUE if PID has exited. And, also sets EXIT_STATUS to the
913 exit code of PID, if any.
915 #define target_has_exited(pid,wait_status,exit_status) \
916 (*current_target.to_has_exited) (pid,wait_status,exit_status)
918 /* The debugger has completed a blocking wait() call. There is now
919 some process event that must be processed. This function should
920 be defined by those targets that require the debugger to perform
921 cleanup or internal state changes in response to the process event.
924 /* The inferior process has died. Do what is right. */
926 #define target_mourn_inferior() \
927 (*current_target.to_mourn_inferior) ()
929 /* Does target have enough data to do a run or attach command? */
931 #define target_can_run(t) \
934 /* post process changes to signal handling in the inferior. */
936 #define target_notice_signals(pid) \
937 (*current_target.to_notice_signals) (pid)
939 /* Check to see if a thread is still alive. */
941 #define target_thread_alive(pid) \
942 (*current_target.to_thread_alive) (pid)
944 /* Query for new threads and add them to the thread list. */
946 #define target_find_new_threads() \
948 if (current_target.to_find_new_threads) \
949 (*current_target.to_find_new_threads) (); \
952 /* Make target stop in a continuable fashion. (For instance, under Unix, this
953 should act like SIGSTOP). This function is normally used by GUIs to
954 implement a stop button. */
956 #define target_stop current_target.to_stop
958 /* Queries the target side for some information. The first argument is a
959 letter specifying the type of the query, which is used to determine who
960 should process it. The second argument is a string that specifies which
961 information is desired and the third is a buffer that carries back the
962 response from the target side. The fourth parameter is the size of the
963 output buffer supplied. */
965 #define target_query(query_type, query, resp_buffer, bufffer_size) \
966 (*current_target.to_query) (query_type, query, resp_buffer, bufffer_size)
968 /* Send the specified COMMAND to the target's monitor
969 (shell,interpreter) for execution. The result of the query is
972 #define target_rcmd(command, outbuf) \
973 (*current_target.to_rcmd) (command, outbuf)
976 /* Get the symbol information for a breakpointable routine called when
977 an exception event occurs.
978 Intended mainly for C++, and for those
979 platforms/implementations where such a callback mechanism is available,
980 e.g. HP-UX with ANSI C++ (aCC). Some compilers (e.g. g++) support
981 different mechanisms for debugging exceptions. */
983 #define target_enable_exception_callback(kind, enable) \
984 (*current_target.to_enable_exception_callback) (kind, enable)
986 /* Get the current exception event kind -- throw or catch, etc. */
988 #define target_get_current_exception_event() \
989 (*current_target.to_get_current_exception_event) ()
991 /* Pointer to next target in the chain, e.g. a core file and an exec file. */
993 #define target_next \
994 (current_target.to_next)
996 /* Does the target include all of memory, or only part of it? This
997 determines whether we look up the target chain for other parts of
998 memory if this target can't satisfy a request. */
1000 #define target_has_all_memory \
1001 (current_target.to_has_all_memory)
1003 /* Does the target include memory? (Dummy targets don't.) */
1005 #define target_has_memory \
1006 (current_target.to_has_memory)
1008 /* Does the target have a stack? (Exec files don't, VxWorks doesn't, until
1009 we start a process.) */
1011 #define target_has_stack \
1012 (current_target.to_has_stack)
1014 /* Does the target have registers? (Exec files don't.) */
1016 #define target_has_registers \
1017 (current_target.to_has_registers)
1019 /* Does the target have execution? Can we make it jump (through
1020 hoops), or pop its stack a few times? FIXME: If this is to work that
1021 way, it needs to check whether an inferior actually exists.
1022 remote-udi.c and probably other targets can be the current target
1023 when the inferior doesn't actually exist at the moment. Right now
1024 this just tells us whether this target is *capable* of execution. */
1026 #define target_has_execution \
1027 (current_target.to_has_execution)
1029 /* Can the target support the debugger control of thread execution?
1030 a) Can it lock the thread scheduler?
1031 b) Can it switch the currently running thread? */
1033 #define target_can_lock_scheduler \
1034 (current_target.to_has_thread_control & tc_schedlock)
1036 #define target_can_switch_threads \
1037 (current_target.to_has_thread_control & tc_switch)
1039 /* Can the target support asynchronous execution? */
1040 #define target_can_async_p() (current_target.to_can_async_p ())
1042 /* Is the target in asynchronous execution mode? */
1043 #define target_is_async_p() (current_target.to_is_async_p())
1045 /* Put the target in async mode with the specified callback function. */
1046 #define target_async(CALLBACK,CONTEXT) (current_target.to_async((CALLBACK), (CONTEXT)))
1048 extern void target_link PARAMS ((char *, CORE_ADDR *));
1050 /* Converts a process id to a string. Usually, the string just contains
1051 `process xyz', but on some systems it may contain
1052 `process xyz thread abc'. */
1054 #ifndef target_pid_to_str
1055 #define target_pid_to_str(PID) \
1056 normal_pid_to_str (PID)
1057 extern char *normal_pid_to_str PARAMS ((int pid));
1060 #ifndef target_tid_to_str
1061 #define target_tid_to_str(PID) \
1062 normal_pid_to_str (PID)
1063 extern char *normal_pid_to_str PARAMS ((int pid));
1067 #ifndef target_new_objfile
1068 #define target_new_objfile(OBJFILE)
1071 #ifndef target_pid_or_tid_to_str
1072 #define target_pid_or_tid_to_str(ID) \
1073 normal_pid_to_str (ID)
1076 /* Attempts to find the pathname of the executable file
1077 that was run to create a specified process.
1079 The process PID must be stopped when this operation is used.
1081 If the executable file cannot be determined, NULL is returned.
1083 Else, a pointer to a character string containing the pathname
1084 is returned. This string should be copied into a buffer by
1085 the client if the string will not be immediately used, or if
1089 #define target_pid_to_exec_file(pid) \
1090 (current_target.to_pid_to_exec_file) (pid)
1092 /* Hook to call target-dependant code after reading in a new symbol table. */
1094 #ifndef TARGET_SYMFILE_POSTREAD
1095 #define TARGET_SYMFILE_POSTREAD(OBJFILE)
1098 /* Hook to call target dependant code just after inferior target process has
1101 #ifndef TARGET_CREATE_INFERIOR_HOOK
1102 #define TARGET_CREATE_INFERIOR_HOOK(PID)
1105 /* Hardware watchpoint interfaces. */
1107 /* Returns non-zero if we were stopped by a hardware watchpoint (memory read or
1110 #ifndef STOPPED_BY_WATCHPOINT
1111 #define STOPPED_BY_WATCHPOINT(w) 0
1114 /* HP-UX supplies these operations, which respectively disable and enable
1115 the memory page-protections that are used to implement hardware watchpoints
1116 on that platform. See wait_for_inferior's use of these.
1118 #if !defined(TARGET_DISABLE_HW_WATCHPOINTS)
1119 #define TARGET_DISABLE_HW_WATCHPOINTS(pid)
1122 #if !defined(TARGET_ENABLE_HW_WATCHPOINTS)
1123 #define TARGET_ENABLE_HW_WATCHPOINTS(pid)
1126 /* Provide defaults for systems that don't support hardware watchpoints. */
1128 #ifndef TARGET_HAS_HARDWARE_WATCHPOINTS
1130 /* Returns non-zero if we can set a hardware watchpoint of type TYPE. TYPE is
1131 one of bp_hardware_watchpoint, bp_read_watchpoint, bp_write_watchpoint, or
1132 bp_hardware_breakpoint. CNT is the number of such watchpoints used so far
1133 (including this one?). OTHERTYPE is who knows what... */
1135 #define TARGET_CAN_USE_HARDWARE_WATCHPOINT(TYPE,CNT,OTHERTYPE) 0
1137 #if !defined(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
1138 #define TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT(byte_count) \
1139 (LONGEST)(byte_count) <= REGISTER_SIZE
1142 /* However, some addresses may not be profitable to use hardware to watch,
1143 or may be difficult to understand when the addressed object is out of
1144 scope, and hence should be unwatched. On some targets, this may have
1145 severe performance penalties, such that we might as well use regular
1146 watchpoints, and save (possibly precious) hardware watchpoints for other
1149 #if !defined(TARGET_RANGE_PROFITABLE_FOR_HW_WATCHPOINT)
1150 #define TARGET_RANGE_PROFITABLE_FOR_HW_WATCHPOINT(pid,start,len) 0
1154 /* Set/clear a hardware watchpoint starting at ADDR, for LEN bytes. TYPE is 0
1155 for write, 1 for read, and 2 for read/write accesses. Returns 0 for
1156 success, non-zero for failure. */
1158 #define target_remove_watchpoint(ADDR,LEN,TYPE) -1
1159 #define target_insert_watchpoint(ADDR,LEN,TYPE) -1
1161 #endif /* TARGET_HAS_HARDWARE_WATCHPOINTS */
1163 #ifndef target_insert_hw_breakpoint
1164 #define target_remove_hw_breakpoint(ADDR,SHADOW) -1
1165 #define target_insert_hw_breakpoint(ADDR,SHADOW) -1
1168 #ifndef target_stopped_data_address
1169 #define target_stopped_data_address() 0
1172 /* If defined, then we need to decr pc by this much after a hardware break-
1173 point. Presumably this overrides DECR_PC_AFTER_BREAK... */
1175 #ifndef DECR_PC_AFTER_HW_BREAK
1176 #define DECR_PC_AFTER_HW_BREAK 0
1179 /* Sometimes gdb may pick up what appears to be a valid target address
1180 from a minimal symbol, but the value really means, essentially,
1181 "This is an index into a table which is populated when the inferior
1182 is run. Therefore, do not attempt to use this as a PC."
1184 #if !defined(PC_REQUIRES_RUN_BEFORE_USE)
1185 #define PC_REQUIRES_RUN_BEFORE_USE(pc) (0)
1188 /* This will only be defined by a target that supports catching vfork events,
1191 On some targets (such as HP-UX 10.20 and earlier), resuming a newly vforked
1192 child process after it has exec'd, causes the parent process to resume as
1193 well. To prevent the parent from running spontaneously, such targets should
1194 define this to a function that prevents that from happening.
1196 #if !defined(ENSURE_VFORKING_PARENT_REMAINS_STOPPED)
1197 #define ENSURE_VFORKING_PARENT_REMAINS_STOPPED(PID) (0)
1200 /* This will only be defined by a target that supports catching vfork events,
1203 On some targets (such as HP-UX 10.20 and earlier), a newly vforked child
1204 process must be resumed when it delivers its exec event, before the parent
1205 vfork event will be delivered to us.
1207 #if !defined(RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK)
1208 #define RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK() (0)
1211 /* Routines for maintenance of the target structures...
1213 add_target: Add a target to the list of all possible targets.
1215 push_target: Make this target the top of the stack of currently used
1216 targets, within its particular stratum of the stack. Result
1217 is 0 if now atop the stack, nonzero if not on top (maybe
1220 unpush_target: Remove this from the stack of currently used targets,
1221 no matter where it is on the list. Returns 0 if no
1222 change, 1 if removed from stack.
1224 pop_target: Remove the top thing on the stack of current targets. */
1227 add_target PARAMS ((struct target_ops *));
1230 push_target PARAMS ((struct target_ops *));
1233 unpush_target PARAMS ((struct target_ops *));
1236 target_preopen PARAMS ((int));
1239 pop_target PARAMS ((void));
1241 /* Struct section_table maps address ranges to file sections. It is
1242 mostly used with BFD files, but can be used without (e.g. for handling
1243 raw disks, or files not in formats handled by BFD). */
1245 struct section_table
1247 CORE_ADDR addr; /* Lowest address in section */
1248 CORE_ADDR endaddr; /* 1+highest address in section */
1250 sec_ptr the_bfd_section;
1252 bfd *bfd; /* BFD file pointer */
1255 /* Builds a section table, given args BFD, SECTABLE_PTR, SECEND_PTR.
1256 Returns 0 if OK, 1 on error. */
1259 build_section_table PARAMS ((bfd *, struct section_table **,
1260 struct section_table **));
1262 /* From mem-break.c */
1264 extern int memory_remove_breakpoint PARAMS ((CORE_ADDR, char *));
1266 extern int memory_insert_breakpoint PARAMS ((CORE_ADDR, char *));
1268 extern int default_memory_remove_breakpoint PARAMS ((CORE_ADDR, char *));
1270 extern int default_memory_insert_breakpoint PARAMS ((CORE_ADDR, char *));
1272 extern breakpoint_from_pc_fn memory_breakpoint_from_pc;
1273 #ifndef BREAKPOINT_FROM_PC
1274 #define BREAKPOINT_FROM_PC(pcptr, lenptr) memory_breakpoint_from_pc (pcptr, lenptr)
1281 initialize_targets PARAMS ((void));
1284 noprocess PARAMS ((void));
1287 find_default_attach PARAMS ((char *, int));
1290 find_default_require_attach PARAMS ((char *, int));
1293 find_default_require_detach PARAMS ((int, char *, int));
1296 find_default_create_inferior PARAMS ((char *, char *, char **));
1299 find_default_clone_and_follow_inferior PARAMS ((int, int *));
1301 extern struct target_ops *find_run_target PARAMS ((void));
1303 extern struct target_ops *
1304 find_core_target PARAMS ((void));
1307 target_resize_to_sections PARAMS ((struct target_ops *target, int num_added));
1309 /* Stuff that should be shared among the various remote targets. */
1311 /* Debugging level. 0 is off, and non-zero values mean to print some debug
1312 information (higher values, more information). */
1313 extern int remote_debug;
1315 /* Speed in bits per second, or -1 which means don't mess with the speed. */
1316 extern int baud_rate;
1317 /* Timeout limit for response from target. */
1318 extern int remote_timeout;
1320 extern asection *target_memory_bfd_section;
1322 /* Functions for helping to write a native target. */
1324 /* This is for native targets which use a unix/POSIX-style waitstatus. */
1325 extern void store_waitstatus PARAMS ((struct target_waitstatus *, int));
1327 /* Convert between host signal numbers and enum target_signal's. */
1328 extern enum target_signal target_signal_from_host PARAMS ((int));
1329 extern int target_signal_to_host PARAMS ((enum target_signal));
1331 /* Convert from a number used in a GDB command to an enum target_signal. */
1332 extern enum target_signal target_signal_from_command PARAMS ((int));
1334 /* Any target can call this to switch to remote protocol (in remote.c). */
1335 extern void push_remote_target PARAMS ((char *name, int from_tty));
1337 /* Imported from machine dependent code */
1339 #ifndef SOFTWARE_SINGLE_STEP_P
1340 #define SOFTWARE_SINGLE_STEP_P 0
1341 #define SOFTWARE_SINGLE_STEP(sig,bp_p) abort ()
1342 #endif /* SOFTWARE_SINGLE_STEP_P */
1344 /* Blank target vector entries are initialized to target_ignore. */
1345 void target_ignore PARAMS ((void));
1347 /* Macro for getting target's idea of a frame pointer.
1348 FIXME: GDB's whole scheme for dealing with "frames" and
1349 "frame pointers" needs a serious shakedown. */
1350 #ifndef TARGET_VIRTUAL_FRAME_POINTER
1351 #define TARGET_VIRTUAL_FRAME_POINTER(ADDR, REGP, OFFP) \
1352 do { *(REGP) = FP_REGNUM; *(OFFP) = 0; } while (0)
1353 #endif /* TARGET_VIRTUAL_FRAME_POINTER */
1355 #endif /* !defined (TARGET_H) */