1 /* Interface between GDB and target environments, including files and processes
3 Copyright (C) 1990-2014 Free Software Foundation, Inc.
5 Contributed by Cygnus Support. Written by John Gilmore.
7 This file is part of GDB.
9 This program is free software; you can redistribute it and/or modify
10 it under the terms of the GNU General Public License as published by
11 the Free Software Foundation; either version 3 of the License, or
12 (at your option) any later version.
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
19 You should have received a copy of the GNU General Public License
20 along with this program. If not, see <http://www.gnu.org/licenses/>. */
22 #if !defined (TARGET_H)
30 struct bp_target_info;
32 struct target_section_table;
33 struct trace_state_variable;
37 struct static_tracepoint_marker;
38 struct traceframe_info;
42 /* This include file defines the interface between the main part
43 of the debugger, and the part which is target-specific, or
44 specific to the communications interface between us and the
47 A TARGET is an interface between the debugger and a particular
48 kind of file or process. Targets can be STACKED in STRATA,
49 so that more than one target can potentially respond to a request.
50 In particular, memory accesses will walk down the stack of targets
51 until they find a target that is interested in handling that particular
52 address. STRATA are artificial boundaries on the stack, within
53 which particular kinds of targets live. Strata exist so that
54 people don't get confused by pushing e.g. a process target and then
55 a file target, and wondering why they can't see the current values
56 of variables any more (the file target is handling them and they
57 never get to the process target). So when you push a file target,
58 it goes into the file stratum, which is always below the process
61 #include "target/resume.h"
62 #include "target/wait.h"
63 #include "target/waitstatus.h"
68 #include "gdb_signals.h"
74 dummy_stratum, /* The lowest of the low */
75 file_stratum, /* Executable files, etc */
76 process_stratum, /* Executing processes or core dump files */
77 thread_stratum, /* Executing threads */
78 record_stratum, /* Support record debugging */
79 arch_stratum /* Architecture overrides */
82 enum thread_control_capabilities
84 tc_none = 0, /* Default: can't control thread execution. */
85 tc_schedlock = 1, /* Can lock the thread scheduler. */
88 /* The structure below stores information about a system call.
89 It is basically used in the "catch syscall" command, and in
90 every function that gives information about a system call.
92 It's also good to mention that its fields represent everything
93 that we currently know about a syscall in GDB. */
96 /* The syscall number. */
99 /* The syscall name. */
103 /* Return a pretty printed form of target_waitstatus.
104 Space for the result is malloc'd, caller must free. */
105 extern char *target_waitstatus_to_string (const struct target_waitstatus *);
107 /* Return a pretty printed form of TARGET_OPTIONS.
108 Space for the result is malloc'd, caller must free. */
109 extern char *target_options_to_string (int target_options);
111 /* Possible types of events that the inferior handler will have to
113 enum inferior_event_type
115 /* Process a normal inferior event which will result in target_wait
118 /* We are called because a timer went off. */
120 /* We are called to do stuff after the inferior stops. */
122 /* We are called to do some stuff after the inferior stops, but we
123 are expected to reenter the proceed() and
124 handle_inferior_event() functions. This is used only in case of
125 'step n' like commands. */
129 /* Target objects which can be transfered using target_read,
130 target_write, et cetera. */
134 /* AVR target specific transfer. See "avr-tdep.c" and "remote.c". */
136 /* SPU target specific transfer. See "spu-tdep.c". */
138 /* Transfer up-to LEN bytes of memory starting at OFFSET. */
139 TARGET_OBJECT_MEMORY,
140 /* Memory, avoiding GDB's data cache and trusting the executable.
141 Target implementations of to_xfer_partial never need to handle
142 this object, and most callers should not use it. */
143 TARGET_OBJECT_RAW_MEMORY,
144 /* Memory known to be part of the target's stack. This is cached even
145 if it is not in a region marked as such, since it is known to be
147 TARGET_OBJECT_STACK_MEMORY,
148 /* Memory known to be part of the target code. This is cached even
149 if it is not in a region marked as such. */
150 TARGET_OBJECT_CODE_MEMORY,
151 /* Kernel Unwind Table. See "ia64-tdep.c". */
152 TARGET_OBJECT_UNWIND_TABLE,
153 /* Transfer auxilliary vector. */
155 /* StackGhost cookie. See "sparc-tdep.c". */
156 TARGET_OBJECT_WCOOKIE,
157 /* Target memory map in XML format. */
158 TARGET_OBJECT_MEMORY_MAP,
159 /* Flash memory. This object can be used to write contents to
160 a previously erased flash memory. Using it without erasing
161 flash can have unexpected results. Addresses are physical
162 address on target, and not relative to flash start. */
164 /* Available target-specific features, e.g. registers and coprocessors.
165 See "target-descriptions.c". ANNEX should never be empty. */
166 TARGET_OBJECT_AVAILABLE_FEATURES,
167 /* Currently loaded libraries, in XML format. */
168 TARGET_OBJECT_LIBRARIES,
169 /* Currently loaded libraries specific for SVR4 systems, in XML format. */
170 TARGET_OBJECT_LIBRARIES_SVR4,
171 /* Currently loaded libraries specific to AIX systems, in XML format. */
172 TARGET_OBJECT_LIBRARIES_AIX,
173 /* Get OS specific data. The ANNEX specifies the type (running
174 processes, etc.). The data being transfered is expected to follow
175 the DTD specified in features/osdata.dtd. */
176 TARGET_OBJECT_OSDATA,
177 /* Extra signal info. Usually the contents of `siginfo_t' on unix
179 TARGET_OBJECT_SIGNAL_INFO,
180 /* The list of threads that are being debugged. */
181 TARGET_OBJECT_THREADS,
182 /* Collected static trace data. */
183 TARGET_OBJECT_STATIC_TRACE_DATA,
184 /* The HP-UX registers (those that can be obtained or modified by using
185 the TT_LWP_RUREGS/TT_LWP_WUREGS ttrace requests). */
186 TARGET_OBJECT_HPUX_UREGS,
187 /* The HP-UX shared library linkage pointer. ANNEX should be a string
188 image of the code address whose linkage pointer we are looking for.
190 The size of the data transfered is always 8 bytes (the size of an
192 TARGET_OBJECT_HPUX_SOLIB_GOT,
193 /* Traceframe info, in XML format. */
194 TARGET_OBJECT_TRACEFRAME_INFO,
195 /* Load maps for FDPIC systems. */
197 /* Darwin dynamic linker info data. */
198 TARGET_OBJECT_DARWIN_DYLD_INFO,
199 /* OpenVMS Unwind Information Block. */
200 TARGET_OBJECT_OPENVMS_UIB,
201 /* Branch trace data, in XML format. */
203 /* Possible future objects: TARGET_OBJECT_FILE, ... */
206 /* Possible values returned by target_xfer_partial, etc. */
208 enum target_xfer_status
210 /* Some bytes are transferred. */
213 /* No further transfer is possible. */
216 /* Generic I/O error. Note that it's important that this is '-1',
217 as we still have target_xfer-related code returning hardcoded
219 TARGET_XFER_E_IO = -1,
221 /* Transfer failed because the piece of the object requested is
223 TARGET_XFER_E_UNAVAILABLE = -2,
225 /* Keep list in sync with target_xfer_error_to_string. */
228 #define TARGET_XFER_STATUS_ERROR_P(STATUS) ((STATUS) < TARGET_XFER_EOF)
230 /* Return the string form of ERR. */
232 extern const char *target_xfer_status_to_string (enum target_xfer_status err);
234 /* Enumeration of the kinds of traceframe searches that a target may
235 be able to perform. */
246 typedef struct static_tracepoint_marker *static_tracepoint_marker_p;
247 DEF_VEC_P(static_tracepoint_marker_p);
249 typedef enum target_xfer_status
250 target_xfer_partial_ftype (struct target_ops *ops,
251 enum target_object object,
254 const gdb_byte *writebuf,
257 ULONGEST *xfered_len);
259 /* Request that OPS transfer up to LEN 8-bit bytes of the target's
260 OBJECT. The OFFSET, for a seekable object, specifies the
261 starting point. The ANNEX can be used to provide additional
262 data-specific information to the target.
264 Return the number of bytes actually transfered, or a negative error
265 code (an 'enum target_xfer_error' value) if the transfer is not
266 supported or otherwise fails. Return of a positive value less than
267 LEN indicates that no further transfer is possible. Unlike the raw
268 to_xfer_partial interface, callers of these functions do not need
269 to retry partial transfers. */
271 extern LONGEST target_read (struct target_ops *ops,
272 enum target_object object,
273 const char *annex, gdb_byte *buf,
274 ULONGEST offset, LONGEST len);
276 struct memory_read_result
278 /* First address that was read. */
280 /* Past-the-end address. */
285 typedef struct memory_read_result memory_read_result_s;
286 DEF_VEC_O(memory_read_result_s);
288 extern void free_memory_read_result_vector (void *);
290 extern VEC(memory_read_result_s)* read_memory_robust (struct target_ops *ops,
294 extern LONGEST target_write (struct target_ops *ops,
295 enum target_object object,
296 const char *annex, const gdb_byte *buf,
297 ULONGEST offset, LONGEST len);
299 /* Similar to target_write, except that it also calls PROGRESS with
300 the number of bytes written and the opaque BATON after every
301 successful partial write (and before the first write). This is
302 useful for progress reporting and user interaction while writing
303 data. To abort the transfer, the progress callback can throw an
306 LONGEST target_write_with_progress (struct target_ops *ops,
307 enum target_object object,
308 const char *annex, const gdb_byte *buf,
309 ULONGEST offset, LONGEST len,
310 void (*progress) (ULONGEST, void *),
313 /* Wrapper to perform a full read of unknown size. OBJECT/ANNEX will
314 be read using OPS. The return value will be -1 if the transfer
315 fails or is not supported; 0 if the object is empty; or the length
316 of the object otherwise. If a positive value is returned, a
317 sufficiently large buffer will be allocated using xmalloc and
318 returned in *BUF_P containing the contents of the object.
320 This method should be used for objects sufficiently small to store
321 in a single xmalloc'd buffer, when no fixed bound on the object's
322 size is known in advance. Don't try to read TARGET_OBJECT_MEMORY
323 through this function. */
325 extern LONGEST target_read_alloc (struct target_ops *ops,
326 enum target_object object,
327 const char *annex, gdb_byte **buf_p);
329 /* Read OBJECT/ANNEX using OPS. The result is NUL-terminated and
330 returned as a string, allocated using xmalloc. If an error occurs
331 or the transfer is unsupported, NULL is returned. Empty objects
332 are returned as allocated but empty strings. A warning is issued
333 if the result contains any embedded NUL bytes. */
335 extern char *target_read_stralloc (struct target_ops *ops,
336 enum target_object object,
339 /* See target_ops->to_xfer_partial. */
340 extern target_xfer_partial_ftype target_xfer_partial;
342 /* Wrappers to target read/write that perform memory transfers. They
343 throw an error if the memory transfer fails.
345 NOTE: cagney/2003-10-23: The naming schema is lifted from
346 "frame.h". The parameter order is lifted from get_frame_memory,
347 which in turn lifted it from read_memory. */
349 extern void get_target_memory (struct target_ops *ops, CORE_ADDR addr,
350 gdb_byte *buf, LONGEST len);
351 extern ULONGEST get_target_memory_unsigned (struct target_ops *ops,
352 CORE_ADDR addr, int len,
353 enum bfd_endian byte_order);
355 struct thread_info; /* fwd decl for parameter list below: */
357 /* The type of the callback to the to_async method. */
359 typedef void async_callback_ftype (enum inferior_event_type event_type,
362 /* These defines are used to mark target_ops methods. The script
363 make-target-delegates scans these and auto-generates the base
364 method implementations. There are four macros that can be used:
366 1. TARGET_DEFAULT_IGNORE. There is no argument. The base method
367 does nothing. This is only valid if the method return type is
370 2. TARGET_DEFAULT_NORETURN. The argument is a function call, like
371 'tcomplain ()'. The base method simply makes this call, which is
372 assumed not to return.
374 3. TARGET_DEFAULT_RETURN. The argument is a C expression. The
375 base method returns this expression's value.
377 4. TARGET_DEFAULT_FUNC. The argument is the name of a function.
378 make-target-delegates does not generate a base method in this case,
379 but instead uses the argument function as the base method. */
381 #define TARGET_DEFAULT_IGNORE()
382 #define TARGET_DEFAULT_NORETURN(ARG)
383 #define TARGET_DEFAULT_RETURN(ARG)
384 #define TARGET_DEFAULT_FUNC(ARG)
388 struct target_ops *beneath; /* To the target under this one. */
389 char *to_shortname; /* Name this target type */
390 char *to_longname; /* Name for printing */
391 char *to_doc; /* Documentation. Does not include trailing
392 newline, and starts with a one-line descrip-
393 tion (probably similar to to_longname). */
394 /* Per-target scratch pad. */
396 /* The open routine takes the rest of the parameters from the
397 command, and (if successful) pushes a new target onto the
398 stack. Targets should supply this routine, if only to provide
400 void (*to_open) (char *, int);
401 /* Old targets with a static target vector provide "to_close".
402 New re-entrant targets provide "to_xclose" and that is expected
403 to xfree everything (including the "struct target_ops"). */
404 void (*to_xclose) (struct target_ops *targ);
405 void (*to_close) (struct target_ops *);
406 void (*to_attach) (struct target_ops *ops, char *, int);
407 void (*to_post_attach) (struct target_ops *, int);
408 void (*to_detach) (struct target_ops *ops, const char *, int);
409 void (*to_disconnect) (struct target_ops *, char *, int);
410 void (*to_resume) (struct target_ops *, ptid_t, int, enum gdb_signal)
411 TARGET_DEFAULT_NORETURN (noprocess ());
412 ptid_t (*to_wait) (struct target_ops *,
413 ptid_t, struct target_waitstatus *, int)
414 TARGET_DEFAULT_NORETURN (noprocess ());
415 void (*to_fetch_registers) (struct target_ops *, struct regcache *, int);
416 void (*to_store_registers) (struct target_ops *, struct regcache *, int)
417 TARGET_DEFAULT_NORETURN (noprocess ());
418 void (*to_prepare_to_store) (struct target_ops *, struct regcache *);
420 /* Transfer LEN bytes of memory between GDB address MYADDR and
421 target address MEMADDR. If WRITE, transfer them to the target, else
422 transfer them from the target. TARGET is the target from which we
425 Return value, N, is one of the following:
427 0 means that we can't handle this. If errno has been set, it is the
428 error which prevented us from doing it (FIXME: What about bfd_error?).
430 positive (call it N) means that we have transferred N bytes
431 starting at MEMADDR. We might be able to handle more bytes
432 beyond this length, but no promises.
434 negative (call its absolute value N) means that we cannot
435 transfer right at MEMADDR, but we could transfer at least
436 something at MEMADDR + N.
438 NOTE: cagney/2004-10-01: This has been entirely superseeded by
439 to_xfer_partial and inferior inheritance. */
441 int (*deprecated_xfer_memory) (CORE_ADDR memaddr, gdb_byte *myaddr,
443 struct mem_attrib *attrib,
444 struct target_ops *target);
446 void (*to_files_info) (struct target_ops *);
447 int (*to_insert_breakpoint) (struct target_ops *, struct gdbarch *,
448 struct bp_target_info *)
449 TARGET_DEFAULT_FUNC (memory_insert_breakpoint);
450 int (*to_remove_breakpoint) (struct target_ops *, struct gdbarch *,
451 struct bp_target_info *)
452 TARGET_DEFAULT_FUNC (memory_remove_breakpoint);
453 int (*to_can_use_hw_breakpoint) (struct target_ops *, int, int, int);
454 int (*to_ranged_break_num_registers) (struct target_ops *);
455 int (*to_insert_hw_breakpoint) (struct target_ops *,
456 struct gdbarch *, struct bp_target_info *);
457 int (*to_remove_hw_breakpoint) (struct target_ops *,
458 struct gdbarch *, struct bp_target_info *);
460 /* Documentation of what the two routines below are expected to do is
461 provided with the corresponding target_* macros. */
462 int (*to_remove_watchpoint) (struct target_ops *,
463 CORE_ADDR, int, int, struct expression *);
464 int (*to_insert_watchpoint) (struct target_ops *,
465 CORE_ADDR, int, int, struct expression *);
467 int (*to_insert_mask_watchpoint) (struct target_ops *,
468 CORE_ADDR, CORE_ADDR, int);
469 int (*to_remove_mask_watchpoint) (struct target_ops *,
470 CORE_ADDR, CORE_ADDR, int);
471 int (*to_stopped_by_watchpoint) (struct target_ops *)
472 TARGET_DEFAULT_RETURN (0);
473 int to_have_steppable_watchpoint;
474 int to_have_continuable_watchpoint;
475 int (*to_stopped_data_address) (struct target_ops *, CORE_ADDR *)
476 TARGET_DEFAULT_RETURN (0);
477 int (*to_watchpoint_addr_within_range) (struct target_ops *,
478 CORE_ADDR, CORE_ADDR, int);
480 /* Documentation of this routine is provided with the corresponding
482 int (*to_region_ok_for_hw_watchpoint) (struct target_ops *,
485 int (*to_can_accel_watchpoint_condition) (struct target_ops *,
487 struct expression *);
488 int (*to_masked_watch_num_registers) (struct target_ops *,
489 CORE_ADDR, CORE_ADDR);
490 void (*to_terminal_init) (struct target_ops *);
491 void (*to_terminal_inferior) (struct target_ops *);
492 void (*to_terminal_ours_for_output) (struct target_ops *);
493 void (*to_terminal_ours) (struct target_ops *);
494 void (*to_terminal_save_ours) (struct target_ops *);
495 void (*to_terminal_info) (struct target_ops *, const char *, int);
496 void (*to_kill) (struct target_ops *);
497 void (*to_load) (struct target_ops *, char *, int);
498 void (*to_create_inferior) (struct target_ops *,
499 char *, char *, char **, int);
500 void (*to_post_startup_inferior) (struct target_ops *, ptid_t);
501 int (*to_insert_fork_catchpoint) (struct target_ops *, int);
502 int (*to_remove_fork_catchpoint) (struct target_ops *, int);
503 int (*to_insert_vfork_catchpoint) (struct target_ops *, int);
504 int (*to_remove_vfork_catchpoint) (struct target_ops *, int);
505 int (*to_follow_fork) (struct target_ops *, int, int);
506 int (*to_insert_exec_catchpoint) (struct target_ops *, int);
507 int (*to_remove_exec_catchpoint) (struct target_ops *, int);
508 int (*to_set_syscall_catchpoint) (struct target_ops *,
509 int, int, int, int, int *);
510 int (*to_has_exited) (struct target_ops *, int, int, int *);
511 void (*to_mourn_inferior) (struct target_ops *);
512 int (*to_can_run) (struct target_ops *);
514 /* Documentation of this routine is provided with the corresponding
516 void (*to_pass_signals) (struct target_ops *, int, unsigned char *);
518 /* Documentation of this routine is provided with the
519 corresponding target_* function. */
520 void (*to_program_signals) (struct target_ops *, int, unsigned char *);
522 int (*to_thread_alive) (struct target_ops *, ptid_t ptid);
523 void (*to_find_new_threads) (struct target_ops *);
524 char *(*to_pid_to_str) (struct target_ops *, ptid_t);
525 char *(*to_extra_thread_info) (struct target_ops *, struct thread_info *);
526 char *(*to_thread_name) (struct target_ops *, struct thread_info *);
527 void (*to_stop) (struct target_ops *, ptid_t);
528 void (*to_rcmd) (struct target_ops *,
529 char *command, struct ui_file *output);
530 char *(*to_pid_to_exec_file) (struct target_ops *, int pid);
531 void (*to_log_command) (struct target_ops *, const char *);
532 struct target_section_table *(*to_get_section_table) (struct target_ops *);
533 enum strata to_stratum;
534 int (*to_has_all_memory) (struct target_ops *);
535 int (*to_has_memory) (struct target_ops *);
536 int (*to_has_stack) (struct target_ops *);
537 int (*to_has_registers) (struct target_ops *);
538 int (*to_has_execution) (struct target_ops *, ptid_t);
539 int to_has_thread_control; /* control thread execution */
540 int to_attach_no_wait;
541 /* ASYNC target controls */
542 int (*to_can_async_p) (struct target_ops *)
543 TARGET_DEFAULT_FUNC (find_default_can_async_p);
544 int (*to_is_async_p) (struct target_ops *)
545 TARGET_DEFAULT_FUNC (find_default_is_async_p);
546 void (*to_async) (struct target_ops *, async_callback_ftype *, void *)
547 TARGET_DEFAULT_NORETURN (tcomplain ());
548 int (*to_supports_non_stop) (struct target_ops *);
549 /* find_memory_regions support method for gcore */
550 int (*to_find_memory_regions) (struct target_ops *,
551 find_memory_region_ftype func, void *data);
552 /* make_corefile_notes support method for gcore */
553 char * (*to_make_corefile_notes) (struct target_ops *, bfd *, int *);
554 /* get_bookmark support method for bookmarks */
555 gdb_byte * (*to_get_bookmark) (struct target_ops *, char *, int);
556 /* goto_bookmark support method for bookmarks */
557 void (*to_goto_bookmark) (struct target_ops *, gdb_byte *, int);
558 /* Return the thread-local address at OFFSET in the
559 thread-local storage for the thread PTID and the shared library
560 or executable file given by OBJFILE. If that block of
561 thread-local storage hasn't been allocated yet, this function
562 may return an error. */
563 CORE_ADDR (*to_get_thread_local_address) (struct target_ops *ops,
565 CORE_ADDR load_module_addr,
568 /* Request that OPS transfer up to LEN 8-bit bytes of the target's
569 OBJECT. The OFFSET, for a seekable object, specifies the
570 starting point. The ANNEX can be used to provide additional
571 data-specific information to the target.
573 Return the transferred status, error or OK (an
574 'enum target_xfer_status' value). Save the number of bytes
575 actually transferred in *XFERED_LEN if transfer is successful
576 (TARGET_XFER_OK) or the number unavailable bytes if the requested
577 data is unavailable (TARGET_XFER_E_UNAVAILABLE). *XFERED_LEN
578 smaller than LEN does not indicate the end of the object, only
579 the end of the transfer; higher level code should continue
580 transferring if desired. This is handled in target.c.
582 The interface does not support a "retry" mechanism. Instead it
583 assumes that at least one byte will be transfered on each
586 NOTE: cagney/2003-10-17: The current interface can lead to
587 fragmented transfers. Lower target levels should not implement
588 hacks, such as enlarging the transfer, in an attempt to
589 compensate for this. Instead, the target stack should be
590 extended so that it implements supply/collect methods and a
591 look-aside object cache. With that available, the lowest
592 target can safely and freely "push" data up the stack.
594 See target_read and target_write for more information. One,
595 and only one, of readbuf or writebuf must be non-NULL. */
597 enum target_xfer_status (*to_xfer_partial) (struct target_ops *ops,
598 enum target_object object,
601 const gdb_byte *writebuf,
602 ULONGEST offset, ULONGEST len,
603 ULONGEST *xfered_len)
604 TARGET_DEFAULT_RETURN (TARGET_XFER_E_IO);
606 /* Returns the memory map for the target. A return value of NULL
607 means that no memory map is available. If a memory address
608 does not fall within any returned regions, it's assumed to be
609 RAM. The returned memory regions should not overlap.
611 The order of regions does not matter; target_memory_map will
612 sort regions by starting address. For that reason, this
613 function should not be called directly except via
616 This method should not cache data; if the memory map could
617 change unexpectedly, it should be invalidated, and higher
618 layers will re-fetch it. */
619 VEC(mem_region_s) *(*to_memory_map) (struct target_ops *);
621 /* Erases the region of flash memory starting at ADDRESS, of
624 Precondition: both ADDRESS and ADDRESS+LENGTH should be aligned
625 on flash block boundaries, as reported by 'to_memory_map'. */
626 void (*to_flash_erase) (struct target_ops *,
627 ULONGEST address, LONGEST length);
629 /* Finishes a flash memory write sequence. After this operation
630 all flash memory should be available for writing and the result
631 of reading from areas written by 'to_flash_write' should be
632 equal to what was written. */
633 void (*to_flash_done) (struct target_ops *);
635 /* Describe the architecture-specific features of this target.
636 Returns the description found, or NULL if no description
638 const struct target_desc *(*to_read_description) (struct target_ops *ops);
640 /* Build the PTID of the thread on which a given task is running,
641 based on LWP and THREAD. These values are extracted from the
642 task Private_Data section of the Ada Task Control Block, and
643 their interpretation depends on the target. */
644 ptid_t (*to_get_ada_task_ptid) (struct target_ops *,
645 long lwp, long thread);
647 /* Read one auxv entry from *READPTR, not reading locations >= ENDPTR.
648 Return 0 if *READPTR is already at the end of the buffer.
649 Return -1 if there is insufficient buffer for a whole entry.
650 Return 1 if an entry was read into *TYPEP and *VALP. */
651 int (*to_auxv_parse) (struct target_ops *ops, gdb_byte **readptr,
652 gdb_byte *endptr, CORE_ADDR *typep, CORE_ADDR *valp);
654 /* Search SEARCH_SPACE_LEN bytes beginning at START_ADDR for the
655 sequence of bytes in PATTERN with length PATTERN_LEN.
657 The result is 1 if found, 0 if not found, and -1 if there was an error
658 requiring halting of the search (e.g. memory read error).
659 If the pattern is found the address is recorded in FOUND_ADDRP. */
660 int (*to_search_memory) (struct target_ops *ops,
661 CORE_ADDR start_addr, ULONGEST search_space_len,
662 const gdb_byte *pattern, ULONGEST pattern_len,
663 CORE_ADDR *found_addrp);
665 /* Can target execute in reverse? */
666 int (*to_can_execute_reverse) (struct target_ops *);
668 /* The direction the target is currently executing. Must be
669 implemented on targets that support reverse execution and async
670 mode. The default simply returns forward execution. */
671 enum exec_direction_kind (*to_execution_direction) (struct target_ops *);
673 /* Does this target support debugging multiple processes
675 int (*to_supports_multi_process) (struct target_ops *);
677 /* Does this target support enabling and disabling tracepoints while a trace
678 experiment is running? */
679 int (*to_supports_enable_disable_tracepoint) (struct target_ops *);
681 /* Does this target support disabling address space randomization? */
682 int (*to_supports_disable_randomization) (struct target_ops *);
684 /* Does this target support the tracenz bytecode for string collection? */
685 int (*to_supports_string_tracing) (struct target_ops *);
687 /* Does this target support evaluation of breakpoint conditions on its
689 int (*to_supports_evaluation_of_breakpoint_conditions) (struct target_ops *);
691 /* Does this target support evaluation of breakpoint commands on its
693 int (*to_can_run_breakpoint_commands) (struct target_ops *);
695 /* Determine current architecture of thread PTID.
697 The target is supposed to determine the architecture of the code where
698 the target is currently stopped at (on Cell, if a target is in spu_run,
699 to_thread_architecture would return SPU, otherwise PPC32 or PPC64).
700 This is architecture used to perform decr_pc_after_break adjustment,
701 and also determines the frame architecture of the innermost frame.
702 ptrace operations need to operate according to target_gdbarch ().
704 The default implementation always returns target_gdbarch (). */
705 struct gdbarch *(*to_thread_architecture) (struct target_ops *, ptid_t);
707 /* Determine current address space of thread PTID.
709 The default implementation always returns the inferior's
711 struct address_space *(*to_thread_address_space) (struct target_ops *,
714 /* Target file operations. */
716 /* Open FILENAME on the target, using FLAGS and MODE. Return a
717 target file descriptor, or -1 if an error occurs (and set
719 int (*to_fileio_open) (struct target_ops *,
720 const char *filename, int flags, int mode,
723 /* Write up to LEN bytes from WRITE_BUF to FD on the target.
724 Return the number of bytes written, or -1 if an error occurs
725 (and set *TARGET_ERRNO). */
726 int (*to_fileio_pwrite) (struct target_ops *,
727 int fd, const gdb_byte *write_buf, int len,
728 ULONGEST offset, int *target_errno);
730 /* Read up to LEN bytes FD on the target into READ_BUF.
731 Return the number of bytes read, or -1 if an error occurs
732 (and set *TARGET_ERRNO). */
733 int (*to_fileio_pread) (struct target_ops *,
734 int fd, gdb_byte *read_buf, int len,
735 ULONGEST offset, int *target_errno);
737 /* Close FD on the target. Return 0, or -1 if an error occurs
738 (and set *TARGET_ERRNO). */
739 int (*to_fileio_close) (struct target_ops *, int fd, int *target_errno);
741 /* Unlink FILENAME on the target. Return 0, or -1 if an error
742 occurs (and set *TARGET_ERRNO). */
743 int (*to_fileio_unlink) (struct target_ops *,
744 const char *filename, int *target_errno);
746 /* Read value of symbolic link FILENAME on the target. Return a
747 null-terminated string allocated via xmalloc, or NULL if an error
748 occurs (and set *TARGET_ERRNO). */
749 char *(*to_fileio_readlink) (struct target_ops *,
750 const char *filename, int *target_errno);
753 /* Implement the "info proc" command. */
754 void (*to_info_proc) (struct target_ops *, char *, enum info_proc_what);
756 /* Tracepoint-related operations. */
758 /* Prepare the target for a tracing run. */
759 void (*to_trace_init) (struct target_ops *);
761 /* Send full details of a tracepoint location to the target. */
762 void (*to_download_tracepoint) (struct target_ops *,
763 struct bp_location *location);
765 /* Is the target able to download tracepoint locations in current
767 int (*to_can_download_tracepoint) (struct target_ops *);
769 /* Send full details of a trace state variable to the target. */
770 void (*to_download_trace_state_variable) (struct target_ops *,
771 struct trace_state_variable *tsv);
773 /* Enable a tracepoint on the target. */
774 void (*to_enable_tracepoint) (struct target_ops *,
775 struct bp_location *location);
777 /* Disable a tracepoint on the target. */
778 void (*to_disable_tracepoint) (struct target_ops *,
779 struct bp_location *location);
781 /* Inform the target info of memory regions that are readonly
782 (such as text sections), and so it should return data from
783 those rather than look in the trace buffer. */
784 void (*to_trace_set_readonly_regions) (struct target_ops *);
786 /* Start a trace run. */
787 void (*to_trace_start) (struct target_ops *);
789 /* Get the current status of a tracing run. */
790 int (*to_get_trace_status) (struct target_ops *, struct trace_status *ts);
792 void (*to_get_tracepoint_status) (struct target_ops *,
793 struct breakpoint *tp,
794 struct uploaded_tp *utp);
796 /* Stop a trace run. */
797 void (*to_trace_stop) (struct target_ops *);
799 /* Ask the target to find a trace frame of the given type TYPE,
800 using NUM, ADDR1, and ADDR2 as search parameters. Returns the
801 number of the trace frame, and also the tracepoint number at
802 TPP. If no trace frame matches, return -1. May throw if the
804 int (*to_trace_find) (struct target_ops *,
805 enum trace_find_type type, int num,
806 CORE_ADDR addr1, CORE_ADDR addr2, int *tpp);
808 /* Get the value of the trace state variable number TSV, returning
809 1 if the value is known and writing the value itself into the
810 location pointed to by VAL, else returning 0. */
811 int (*to_get_trace_state_variable_value) (struct target_ops *,
812 int tsv, LONGEST *val);
814 int (*to_save_trace_data) (const char *filename);
816 int (*to_upload_tracepoints) (struct uploaded_tp **utpp);
818 int (*to_upload_trace_state_variables) (struct uploaded_tsv **utsvp);
820 LONGEST (*to_get_raw_trace_data) (gdb_byte *buf,
821 ULONGEST offset, LONGEST len);
823 /* Get the minimum length of instruction on which a fast tracepoint
824 may be set on the target. If this operation is unsupported,
825 return -1. If for some reason the minimum length cannot be
826 determined, return 0. */
827 int (*to_get_min_fast_tracepoint_insn_len) (void);
829 /* Set the target's tracing behavior in response to unexpected
830 disconnection - set VAL to 1 to keep tracing, 0 to stop. */
831 void (*to_set_disconnected_tracing) (int val);
832 void (*to_set_circular_trace_buffer) (int val);
833 /* Set the size of trace buffer in the target. */
834 void (*to_set_trace_buffer_size) (LONGEST val);
836 /* Add/change textual notes about the trace run, returning 1 if
837 successful, 0 otherwise. */
838 int (*to_set_trace_notes) (const char *user, const char *notes,
839 const char *stopnotes);
841 /* Return the processor core that thread PTID was last seen on.
842 This information is updated only when:
843 - update_thread_list is called
845 If the core cannot be determined -- either for the specified
846 thread, or right now, or in this debug session, or for this
847 target -- return -1. */
848 int (*to_core_of_thread) (struct target_ops *, ptid_t ptid);
850 /* Verify that the memory in the [MEMADDR, MEMADDR+SIZE) range
851 matches the contents of [DATA,DATA+SIZE). Returns 1 if there's
852 a match, 0 if there's a mismatch, and -1 if an error is
853 encountered while reading memory. */
854 int (*to_verify_memory) (struct target_ops *, const gdb_byte *data,
855 CORE_ADDR memaddr, ULONGEST size);
857 /* Return the address of the start of the Thread Information Block
858 a Windows OS specific feature. */
859 int (*to_get_tib_address) (ptid_t ptid, CORE_ADDR *addr);
861 /* Send the new settings of write permission variables. */
862 void (*to_set_permissions) (void);
864 /* Look for a static tracepoint marker at ADDR, and fill in MARKER
865 with its details. Return 1 on success, 0 on failure. */
866 int (*to_static_tracepoint_marker_at) (CORE_ADDR,
867 struct static_tracepoint_marker *marker);
869 /* Return a vector of all tracepoints markers string id ID, or all
870 markers if ID is NULL. */
871 VEC(static_tracepoint_marker_p) *(*to_static_tracepoint_markers_by_strid)
874 /* Return a traceframe info object describing the current
875 traceframe's contents. If the target doesn't support
876 traceframe info, return NULL. If the current traceframe is not
877 selected (the current traceframe number is -1), the target can
878 choose to return either NULL or an empty traceframe info. If
879 NULL is returned, for example in remote target, GDB will read
880 from the live inferior. If an empty traceframe info is
881 returned, for example in tfile target, which means the
882 traceframe info is available, but the requested memory is not
883 available in it. GDB will try to see if the requested memory
884 is available in the read-only sections. This method should not
885 cache data; higher layers take care of caching, invalidating,
886 and re-fetching when necessary. */
887 struct traceframe_info *(*to_traceframe_info) (void);
889 /* Ask the target to use or not to use agent according to USE. Return 1
890 successful, 0 otherwise. */
891 int (*to_use_agent) (int use);
893 /* Is the target able to use agent in current state? */
894 int (*to_can_use_agent) (void);
896 /* Check whether the target supports branch tracing. */
897 int (*to_supports_btrace) (struct target_ops *)
898 TARGET_DEFAULT_RETURN (0);
900 /* Enable branch tracing for PTID and allocate a branch trace target
901 information struct for reading and for disabling branch trace. */
902 struct btrace_target_info *(*to_enable_btrace) (ptid_t ptid);
904 /* Disable branch tracing and deallocate TINFO. */
905 void (*to_disable_btrace) (struct btrace_target_info *tinfo);
907 /* Disable branch tracing and deallocate TINFO. This function is similar
908 to to_disable_btrace, except that it is called during teardown and is
909 only allowed to perform actions that are safe. A counter-example would
910 be attempting to talk to a remote target. */
911 void (*to_teardown_btrace) (struct btrace_target_info *tinfo);
913 /* Read branch trace data for the thread indicated by BTINFO into DATA.
914 DATA is cleared before new trace is added.
915 The branch trace will start with the most recent block and continue
916 towards older blocks. */
917 enum btrace_error (*to_read_btrace) (VEC (btrace_block_s) **data,
918 struct btrace_target_info *btinfo,
919 enum btrace_read_type type);
921 /* Stop trace recording. */
922 void (*to_stop_recording) (void);
924 /* Print information about the recording. */
925 void (*to_info_record) (void);
927 /* Save the recorded execution trace into a file. */
928 void (*to_save_record) (const char *filename);
930 /* Delete the recorded execution trace from the current position onwards. */
931 void (*to_delete_record) (void);
933 /* Query if the record target is currently replaying. */
934 int (*to_record_is_replaying) (void);
936 /* Go to the begin of the execution trace. */
937 void (*to_goto_record_begin) (void);
939 /* Go to the end of the execution trace. */
940 void (*to_goto_record_end) (void);
942 /* Go to a specific location in the recorded execution trace. */
943 void (*to_goto_record) (ULONGEST insn);
945 /* Disassemble SIZE instructions in the recorded execution trace from
946 the current position.
947 If SIZE < 0, disassemble abs (SIZE) preceding instructions; otherwise,
948 disassemble SIZE succeeding instructions. */
949 void (*to_insn_history) (int size, int flags);
951 /* Disassemble SIZE instructions in the recorded execution trace around
953 If SIZE < 0, disassemble abs (SIZE) instructions before FROM; otherwise,
954 disassemble SIZE instructions after FROM. */
955 void (*to_insn_history_from) (ULONGEST from, int size, int flags);
957 /* Disassemble a section of the recorded execution trace from instruction
958 BEGIN (inclusive) to instruction END (inclusive). */
959 void (*to_insn_history_range) (ULONGEST begin, ULONGEST end, int flags);
961 /* Print a function trace of the recorded execution trace.
962 If SIZE < 0, print abs (SIZE) preceding functions; otherwise, print SIZE
963 succeeding functions. */
964 void (*to_call_history) (int size, int flags);
966 /* Print a function trace of the recorded execution trace starting
968 If SIZE < 0, print abs (SIZE) functions before FROM; otherwise, print
969 SIZE functions after FROM. */
970 void (*to_call_history_from) (ULONGEST begin, int size, int flags);
972 /* Print a function trace of an execution trace section from function BEGIN
973 (inclusive) to function END (inclusive). */
974 void (*to_call_history_range) (ULONGEST begin, ULONGEST end, int flags);
976 /* Nonzero if TARGET_OBJECT_LIBRARIES_SVR4 may be read with a
978 int (*to_augmented_libraries_svr4_read) (void);
980 /* Those unwinders are tried before any other arch unwinders. Use NULL if
982 const struct frame_unwind *to_get_unwinder;
983 const struct frame_unwind *to_get_tailcall_unwinder;
985 /* Return the number of bytes by which the PC needs to be decremented
986 after executing a breakpoint instruction.
987 Defaults to gdbarch_decr_pc_after_break (GDBARCH). */
988 CORE_ADDR (*to_decr_pc_after_break) (struct target_ops *ops,
989 struct gdbarch *gdbarch);
992 /* Need sub-structure for target machine related rather than comm related?
996 /* Magic number for checking ops size. If a struct doesn't end with this
997 number, somebody changed the declaration but didn't change all the
998 places that initialize one. */
1000 #define OPS_MAGIC 3840
1002 /* The ops structure for our "current" target process. This should
1003 never be NULL. If there is no target, it points to the dummy_target. */
1005 extern struct target_ops current_target;
1007 /* Define easy words for doing these operations on our current target. */
1009 #define target_shortname (current_target.to_shortname)
1010 #define target_longname (current_target.to_longname)
1012 /* Does whatever cleanup is required for a target that we are no
1013 longer going to be calling. This routine is automatically always
1014 called after popping the target off the target stack - the target's
1015 own methods are no longer available through the target vector.
1016 Closing file descriptors and freeing all memory allocated memory are
1017 typical things it should do. */
1019 void target_close (struct target_ops *targ);
1021 /* Attaches to a process on the target side. Arguments are as passed
1022 to the `attach' command by the user. This routine can be called
1023 when the target is not on the target-stack, if the target_can_run
1024 routine returns 1; in that case, it must push itself onto the stack.
1025 Upon exit, the target should be ready for normal operations, and
1026 should be ready to deliver the status of the process immediately
1027 (without waiting) to an upcoming target_wait call. */
1029 void target_attach (char *, int);
1031 /* Some targets don't generate traps when attaching to the inferior,
1032 or their target_attach implementation takes care of the waiting.
1033 These targets must set to_attach_no_wait. */
1035 #define target_attach_no_wait \
1036 (current_target.to_attach_no_wait)
1038 /* The target_attach operation places a process under debugger control,
1039 and stops the process.
1041 This operation provides a target-specific hook that allows the
1042 necessary bookkeeping to be performed after an attach completes. */
1043 #define target_post_attach(pid) \
1044 (*current_target.to_post_attach) (¤t_target, pid)
1046 /* Takes a program previously attached to and detaches it.
1047 The program may resume execution (some targets do, some don't) and will
1048 no longer stop on signals, etc. We better not have left any breakpoints
1049 in the program or it'll die when it hits one. ARGS is arguments
1050 typed by the user (e.g. a signal to send the process). FROM_TTY
1051 says whether to be verbose or not. */
1053 extern void target_detach (const char *, int);
1055 /* Disconnect from the current target without resuming it (leaving it
1056 waiting for a debugger). */
1058 extern void target_disconnect (char *, int);
1060 /* Resume execution of the target process PTID (or a group of
1061 threads). STEP says whether to single-step or to run free; SIGGNAL
1062 is the signal to be given to the target, or GDB_SIGNAL_0 for no
1063 signal. The caller may not pass GDB_SIGNAL_DEFAULT. A specific
1064 PTID means `step/resume only this process id'. A wildcard PTID
1065 (all threads, or all threads of process) means `step/resume
1066 INFERIOR_PTID, and let other threads (for which the wildcard PTID
1067 matches) resume with their 'thread->suspend.stop_signal' signal
1068 (usually GDB_SIGNAL_0) if it is in "pass" state, or with no signal
1069 if in "no pass" state. */
1071 extern void target_resume (ptid_t ptid, int step, enum gdb_signal signal);
1073 /* Wait for process pid to do something. PTID = -1 to wait for any
1074 pid to do something. Return pid of child, or -1 in case of error;
1075 store status through argument pointer STATUS. Note that it is
1076 _NOT_ OK to throw_exception() out of target_wait() without popping
1077 the debugging target from the stack; GDB isn't prepared to get back
1078 to the prompt with a debugging target but without the frame cache,
1079 stop_pc, etc., set up. OPTIONS is a bitwise OR of TARGET_W*
1082 extern ptid_t target_wait (ptid_t ptid, struct target_waitstatus *status,
1085 /* Fetch at least register REGNO, or all regs if regno == -1. No result. */
1087 extern void target_fetch_registers (struct regcache *regcache, int regno);
1089 /* Store at least register REGNO, or all regs if REGNO == -1.
1090 It can store as many registers as it wants to, so target_prepare_to_store
1091 must have been previously called. Calls error() if there are problems. */
1093 extern void target_store_registers (struct regcache *regcache, int regs);
1095 /* Get ready to modify the registers array. On machines which store
1096 individual registers, this doesn't need to do anything. On machines
1097 which store all the registers in one fell swoop, this makes sure
1098 that REGISTERS contains all the registers from the program being
1101 #define target_prepare_to_store(regcache) \
1102 (*current_target.to_prepare_to_store) (¤t_target, regcache)
1104 /* Determine current address space of thread PTID. */
1106 struct address_space *target_thread_address_space (ptid_t);
1108 /* Implement the "info proc" command. This returns one if the request
1109 was handled, and zero otherwise. It can also throw an exception if
1110 an error was encountered while attempting to handle the
1113 int target_info_proc (char *, enum info_proc_what);
1115 /* Returns true if this target can debug multiple processes
1118 #define target_supports_multi_process() \
1119 (*current_target.to_supports_multi_process) (¤t_target)
1121 /* Returns true if this target can disable address space randomization. */
1123 int target_supports_disable_randomization (void);
1125 /* Returns true if this target can enable and disable tracepoints
1126 while a trace experiment is running. */
1128 #define target_supports_enable_disable_tracepoint() \
1129 (*current_target.to_supports_enable_disable_tracepoint) (¤t_target)
1131 #define target_supports_string_tracing() \
1132 (*current_target.to_supports_string_tracing) (¤t_target)
1134 /* Returns true if this target can handle breakpoint conditions
1137 #define target_supports_evaluation_of_breakpoint_conditions() \
1138 (*current_target.to_supports_evaluation_of_breakpoint_conditions) (¤t_target)
1140 /* Returns true if this target can handle breakpoint commands
1143 #define target_can_run_breakpoint_commands() \
1144 (*current_target.to_can_run_breakpoint_commands) (¤t_target)
1146 extern int target_read_string (CORE_ADDR, char **, int, int *);
1148 extern int target_read_memory (CORE_ADDR memaddr, gdb_byte *myaddr,
1151 extern int target_read_raw_memory (CORE_ADDR memaddr, gdb_byte *myaddr,
1154 extern int target_read_stack (CORE_ADDR memaddr, gdb_byte *myaddr, ssize_t len);
1156 extern int target_read_code (CORE_ADDR memaddr, gdb_byte *myaddr, ssize_t len);
1158 extern int target_write_memory (CORE_ADDR memaddr, const gdb_byte *myaddr,
1161 extern int target_write_raw_memory (CORE_ADDR memaddr, const gdb_byte *myaddr,
1164 /* Fetches the target's memory map. If one is found it is sorted
1165 and returned, after some consistency checking. Otherwise, NULL
1167 VEC(mem_region_s) *target_memory_map (void);
1169 /* Erase the specified flash region. */
1170 void target_flash_erase (ULONGEST address, LONGEST length);
1172 /* Finish a sequence of flash operations. */
1173 void target_flash_done (void);
1175 /* Describes a request for a memory write operation. */
1176 struct memory_write_request
1178 /* Begining address that must be written. */
1180 /* Past-the-end address. */
1182 /* The data to write. */
1184 /* A callback baton for progress reporting for this request. */
1187 typedef struct memory_write_request memory_write_request_s;
1188 DEF_VEC_O(memory_write_request_s);
1190 /* Enumeration specifying different flash preservation behaviour. */
1191 enum flash_preserve_mode
1197 /* Write several memory blocks at once. This version can be more
1198 efficient than making several calls to target_write_memory, in
1199 particular because it can optimize accesses to flash memory.
1201 Moreover, this is currently the only memory access function in gdb
1202 that supports writing to flash memory, and it should be used for
1203 all cases where access to flash memory is desirable.
1205 REQUESTS is the vector (see vec.h) of memory_write_request.
1206 PRESERVE_FLASH_P indicates what to do with blocks which must be
1207 erased, but not completely rewritten.
1208 PROGRESS_CB is a function that will be periodically called to provide
1209 feedback to user. It will be called with the baton corresponding
1210 to the request currently being written. It may also be called
1211 with a NULL baton, when preserved flash sectors are being rewritten.
1213 The function returns 0 on success, and error otherwise. */
1214 int target_write_memory_blocks (VEC(memory_write_request_s) *requests,
1215 enum flash_preserve_mode preserve_flash_p,
1216 void (*progress_cb) (ULONGEST, void *));
1218 /* Print a line about the current target. */
1220 #define target_files_info() \
1221 (*current_target.to_files_info) (¤t_target)
1223 /* Insert a hardware breakpoint at address BP_TGT->placed_address in
1224 the target machine. Returns 0 for success, and returns non-zero or
1225 throws an error (with a detailed failure reason error code and
1226 message) otherwise. */
1228 extern int target_insert_breakpoint (struct gdbarch *gdbarch,
1229 struct bp_target_info *bp_tgt);
1231 /* Remove a breakpoint at address BP_TGT->placed_address in the target
1232 machine. Result is 0 for success, non-zero for error. */
1234 extern int target_remove_breakpoint (struct gdbarch *gdbarch,
1235 struct bp_target_info *bp_tgt);
1237 /* Initialize the terminal settings we record for the inferior,
1238 before we actually run the inferior. */
1240 #define target_terminal_init() \
1241 (*current_target.to_terminal_init) (¤t_target)
1243 /* Put the inferior's terminal settings into effect.
1244 This is preparation for starting or resuming the inferior. */
1246 extern void target_terminal_inferior (void);
1248 /* Put some of our terminal settings into effect,
1249 enough to get proper results from our output,
1250 but do not change into or out of RAW mode
1251 so that no input is discarded.
1253 After doing this, either terminal_ours or terminal_inferior
1254 should be called to get back to a normal state of affairs. */
1256 #define target_terminal_ours_for_output() \
1257 (*current_target.to_terminal_ours_for_output) (¤t_target)
1259 /* Put our terminal settings into effect.
1260 First record the inferior's terminal settings
1261 so they can be restored properly later. */
1263 #define target_terminal_ours() \
1264 (*current_target.to_terminal_ours) (¤t_target)
1266 /* Save our terminal settings.
1267 This is called from TUI after entering or leaving the curses
1268 mode. Since curses modifies our terminal this call is here
1269 to take this change into account. */
1271 #define target_terminal_save_ours() \
1272 (*current_target.to_terminal_save_ours) (¤t_target)
1274 /* Print useful information about our terminal status, if such a thing
1277 #define target_terminal_info(arg, from_tty) \
1278 (*current_target.to_terminal_info) (¤t_target, arg, from_tty)
1280 /* Kill the inferior process. Make it go away. */
1282 extern void target_kill (void);
1284 /* Load an executable file into the target process. This is expected
1285 to not only bring new code into the target process, but also to
1286 update GDB's symbol tables to match.
1288 ARG contains command-line arguments, to be broken down with
1289 buildargv (). The first non-switch argument is the filename to
1290 load, FILE; the second is a number (as parsed by strtoul (..., ...,
1291 0)), which is an offset to apply to the load addresses of FILE's
1292 sections. The target may define switches, or other non-switch
1293 arguments, as it pleases. */
1295 extern void target_load (char *arg, int from_tty);
1297 /* Start an inferior process and set inferior_ptid to its pid.
1298 EXEC_FILE is the file to run.
1299 ALLARGS is a string containing the arguments to the program.
1300 ENV is the environment vector to pass. Errors reported with error().
1301 On VxWorks and various standalone systems, we ignore exec_file. */
1303 void target_create_inferior (char *exec_file, char *args,
1304 char **env, int from_tty);
1306 /* Some targets (such as ttrace-based HPUX) don't allow us to request
1307 notification of inferior events such as fork and vork immediately
1308 after the inferior is created. (This because of how gdb gets an
1309 inferior created via invoking a shell to do it. In such a scenario,
1310 if the shell init file has commands in it, the shell will fork and
1311 exec for each of those commands, and we will see each such fork
1314 Such targets will supply an appropriate definition for this function. */
1316 #define target_post_startup_inferior(ptid) \
1317 (*current_target.to_post_startup_inferior) (¤t_target, ptid)
1319 /* On some targets, we can catch an inferior fork or vfork event when
1320 it occurs. These functions insert/remove an already-created
1321 catchpoint for such events. They return 0 for success, 1 if the
1322 catchpoint type is not supported and -1 for failure. */
1324 #define target_insert_fork_catchpoint(pid) \
1325 (*current_target.to_insert_fork_catchpoint) (¤t_target, pid)
1327 #define target_remove_fork_catchpoint(pid) \
1328 (*current_target.to_remove_fork_catchpoint) (¤t_target, pid)
1330 #define target_insert_vfork_catchpoint(pid) \
1331 (*current_target.to_insert_vfork_catchpoint) (¤t_target, pid)
1333 #define target_remove_vfork_catchpoint(pid) \
1334 (*current_target.to_remove_vfork_catchpoint) (¤t_target, pid)
1336 /* If the inferior forks or vforks, this function will be called at
1337 the next resume in order to perform any bookkeeping and fiddling
1338 necessary to continue debugging either the parent or child, as
1339 requested, and releasing the other. Information about the fork
1340 or vfork event is available via get_last_target_status ().
1341 This function returns 1 if the inferior should not be resumed
1342 (i.e. there is another event pending). */
1344 int target_follow_fork (int follow_child, int detach_fork);
1346 /* On some targets, we can catch an inferior exec event when it
1347 occurs. These functions insert/remove an already-created
1348 catchpoint for such events. They return 0 for success, 1 if the
1349 catchpoint type is not supported and -1 for failure. */
1351 #define target_insert_exec_catchpoint(pid) \
1352 (*current_target.to_insert_exec_catchpoint) (¤t_target, pid)
1354 #define target_remove_exec_catchpoint(pid) \
1355 (*current_target.to_remove_exec_catchpoint) (¤t_target, pid)
1359 NEEDED is nonzero if any syscall catch (of any kind) is requested.
1360 If NEEDED is zero, it means the target can disable the mechanism to
1361 catch system calls because there are no more catchpoints of this type.
1363 ANY_COUNT is nonzero if a generic (filter-less) syscall catch is
1364 being requested. In this case, both TABLE_SIZE and TABLE should
1367 TABLE_SIZE is the number of elements in TABLE. It only matters if
1370 TABLE is an array of ints, indexed by syscall number. An element in
1371 this array is nonzero if that syscall should be caught. This argument
1372 only matters if ANY_COUNT is zero.
1374 Return 0 for success, 1 if syscall catchpoints are not supported or -1
1377 #define target_set_syscall_catchpoint(pid, needed, any_count, table_size, table) \
1378 (*current_target.to_set_syscall_catchpoint) (¤t_target, \
1379 pid, needed, any_count, \
1382 /* Returns TRUE if PID has exited. And, also sets EXIT_STATUS to the
1383 exit code of PID, if any. */
1385 #define target_has_exited(pid,wait_status,exit_status) \
1386 (*current_target.to_has_exited) (¤t_target, \
1387 pid,wait_status,exit_status)
1389 /* The debugger has completed a blocking wait() call. There is now
1390 some process event that must be processed. This function should
1391 be defined by those targets that require the debugger to perform
1392 cleanup or internal state changes in response to the process event. */
1394 /* The inferior process has died. Do what is right. */
1396 void target_mourn_inferior (void);
1398 /* Does target have enough data to do a run or attach command? */
1400 #define target_can_run(t) \
1401 ((t)->to_can_run) (t)
1403 /* Set list of signals to be handled in the target.
1405 PASS_SIGNALS is an array of size NSIG, indexed by target signal number
1406 (enum gdb_signal). For every signal whose entry in this array is
1407 non-zero, the target is allowed -but not required- to skip reporting
1408 arrival of the signal to the GDB core by returning from target_wait,
1409 and to pass the signal directly to the inferior instead.
1411 However, if the target is hardware single-stepping a thread that is
1412 about to receive a signal, it needs to be reported in any case, even
1413 if mentioned in a previous target_pass_signals call. */
1415 extern void target_pass_signals (int nsig, unsigned char *pass_signals);
1417 /* Set list of signals the target may pass to the inferior. This
1418 directly maps to the "handle SIGNAL pass/nopass" setting.
1420 PROGRAM_SIGNALS is an array of size NSIG, indexed by target signal
1421 number (enum gdb_signal). For every signal whose entry in this
1422 array is non-zero, the target is allowed to pass the signal to the
1423 inferior. Signals not present in the array shall be silently
1424 discarded. This does not influence whether to pass signals to the
1425 inferior as a result of a target_resume call. This is useful in
1426 scenarios where the target needs to decide whether to pass or not a
1427 signal to the inferior without GDB core involvement, such as for
1428 example, when detaching (as threads may have been suspended with
1429 pending signals not reported to GDB). */
1431 extern void target_program_signals (int nsig, unsigned char *program_signals);
1433 /* Check to see if a thread is still alive. */
1435 extern int target_thread_alive (ptid_t ptid);
1437 /* Query for new threads and add them to the thread list. */
1439 extern void target_find_new_threads (void);
1441 /* Make target stop in a continuable fashion. (For instance, under
1442 Unix, this should act like SIGSTOP). This function is normally
1443 used by GUIs to implement a stop button. */
1445 extern void target_stop (ptid_t ptid);
1447 /* Send the specified COMMAND to the target's monitor
1448 (shell,interpreter) for execution. The result of the query is
1449 placed in OUTBUF. */
1451 #define target_rcmd(command, outbuf) \
1452 (*current_target.to_rcmd) (¤t_target, command, outbuf)
1455 /* Does the target include all of memory, or only part of it? This
1456 determines whether we look up the target chain for other parts of
1457 memory if this target can't satisfy a request. */
1459 extern int target_has_all_memory_1 (void);
1460 #define target_has_all_memory target_has_all_memory_1 ()
1462 /* Does the target include memory? (Dummy targets don't.) */
1464 extern int target_has_memory_1 (void);
1465 #define target_has_memory target_has_memory_1 ()
1467 /* Does the target have a stack? (Exec files don't, VxWorks doesn't, until
1468 we start a process.) */
1470 extern int target_has_stack_1 (void);
1471 #define target_has_stack target_has_stack_1 ()
1473 /* Does the target have registers? (Exec files don't.) */
1475 extern int target_has_registers_1 (void);
1476 #define target_has_registers target_has_registers_1 ()
1478 /* Does the target have execution? Can we make it jump (through
1479 hoops), or pop its stack a few times? This means that the current
1480 target is currently executing; for some targets, that's the same as
1481 whether or not the target is capable of execution, but there are
1482 also targets which can be current while not executing. In that
1483 case this will become true after target_create_inferior or
1486 extern int target_has_execution_1 (ptid_t);
1488 /* Like target_has_execution_1, but always passes inferior_ptid. */
1490 extern int target_has_execution_current (void);
1492 #define target_has_execution target_has_execution_current ()
1494 /* Default implementations for process_stratum targets. Return true
1495 if there's a selected inferior, false otherwise. */
1497 extern int default_child_has_all_memory (struct target_ops *ops);
1498 extern int default_child_has_memory (struct target_ops *ops);
1499 extern int default_child_has_stack (struct target_ops *ops);
1500 extern int default_child_has_registers (struct target_ops *ops);
1501 extern int default_child_has_execution (struct target_ops *ops,
1504 /* Can the target support the debugger control of thread execution?
1505 Can it lock the thread scheduler? */
1507 #define target_can_lock_scheduler \
1508 (current_target.to_has_thread_control & tc_schedlock)
1510 /* Should the target enable async mode if it is supported? Temporary
1511 cludge until async mode is a strict superset of sync mode. */
1512 extern int target_async_permitted;
1514 /* Can the target support asynchronous execution? */
1515 #define target_can_async_p() (current_target.to_can_async_p (¤t_target))
1517 /* Is the target in asynchronous execution mode? */
1518 #define target_is_async_p() (current_target.to_is_async_p (¤t_target))
1520 int target_supports_non_stop (void);
1522 /* Put the target in async mode with the specified callback function. */
1523 #define target_async(CALLBACK,CONTEXT) \
1524 (current_target.to_async (¤t_target, (CALLBACK), (CONTEXT)))
1526 #define target_execution_direction() \
1527 (current_target.to_execution_direction (¤t_target))
1529 /* Converts a process id to a string. Usually, the string just contains
1530 `process xyz', but on some systems it may contain
1531 `process xyz thread abc'. */
1533 extern char *target_pid_to_str (ptid_t ptid);
1535 extern char *normal_pid_to_str (ptid_t ptid);
1537 /* Return a short string describing extra information about PID,
1538 e.g. "sleeping", "runnable", "running on LWP 3". Null return value
1541 #define target_extra_thread_info(TP) \
1542 (current_target.to_extra_thread_info (¤t_target, TP))
1544 /* Return the thread's name. A NULL result means that the target
1545 could not determine this thread's name. */
1547 extern char *target_thread_name (struct thread_info *);
1549 /* Attempts to find the pathname of the executable file
1550 that was run to create a specified process.
1552 The process PID must be stopped when this operation is used.
1554 If the executable file cannot be determined, NULL is returned.
1556 Else, a pointer to a character string containing the pathname
1557 is returned. This string should be copied into a buffer by
1558 the client if the string will not be immediately used, or if
1561 #define target_pid_to_exec_file(pid) \
1562 (current_target.to_pid_to_exec_file) (¤t_target, pid)
1564 /* See the to_thread_architecture description in struct target_ops. */
1566 #define target_thread_architecture(ptid) \
1567 (current_target.to_thread_architecture (¤t_target, ptid))
1570 * Iterator function for target memory regions.
1571 * Calls a callback function once for each memory region 'mapped'
1572 * in the child process. Defined as a simple macro rather than
1573 * as a function macro so that it can be tested for nullity.
1576 #define target_find_memory_regions(FUNC, DATA) \
1577 (current_target.to_find_memory_regions) (¤t_target, FUNC, DATA)
1580 * Compose corefile .note section.
1583 #define target_make_corefile_notes(BFD, SIZE_P) \
1584 (current_target.to_make_corefile_notes) (¤t_target, BFD, SIZE_P)
1586 /* Bookmark interfaces. */
1587 #define target_get_bookmark(ARGS, FROM_TTY) \
1588 (current_target.to_get_bookmark) (¤t_target, ARGS, FROM_TTY)
1590 #define target_goto_bookmark(ARG, FROM_TTY) \
1591 (current_target.to_goto_bookmark) (¤t_target, ARG, FROM_TTY)
1593 /* Hardware watchpoint interfaces. */
1595 /* Returns non-zero if we were stopped by a hardware watchpoint (memory read or
1596 write). Only the INFERIOR_PTID task is being queried. */
1598 #define target_stopped_by_watchpoint() \
1599 ((*current_target.to_stopped_by_watchpoint) (¤t_target))
1601 /* Non-zero if we have steppable watchpoints */
1603 #define target_have_steppable_watchpoint \
1604 (current_target.to_have_steppable_watchpoint)
1606 /* Non-zero if we have continuable watchpoints */
1608 #define target_have_continuable_watchpoint \
1609 (current_target.to_have_continuable_watchpoint)
1611 /* Provide defaults for hardware watchpoint functions. */
1613 /* If the *_hw_beakpoint functions have not been defined
1614 elsewhere use the definitions in the target vector. */
1616 /* Returns non-zero if we can set a hardware watchpoint of type TYPE. TYPE is
1617 one of bp_hardware_watchpoint, bp_read_watchpoint, bp_write_watchpoint, or
1618 bp_hardware_breakpoint. CNT is the number of such watchpoints used so far
1619 (including this one?). OTHERTYPE is who knows what... */
1621 #define target_can_use_hardware_watchpoint(TYPE,CNT,OTHERTYPE) \
1622 (*current_target.to_can_use_hw_breakpoint) (¤t_target, \
1623 TYPE, CNT, OTHERTYPE);
1625 /* Returns the number of debug registers needed to watch the given
1626 memory region, or zero if not supported. */
1628 #define target_region_ok_for_hw_watchpoint(addr, len) \
1629 (*current_target.to_region_ok_for_hw_watchpoint) (¤t_target, \
1633 /* Set/clear a hardware watchpoint starting at ADDR, for LEN bytes.
1634 TYPE is 0 for write, 1 for read, and 2 for read/write accesses.
1635 COND is the expression for its condition, or NULL if there's none.
1636 Returns 0 for success, 1 if the watchpoint type is not supported,
1639 #define target_insert_watchpoint(addr, len, type, cond) \
1640 (*current_target.to_insert_watchpoint) (¤t_target, \
1641 addr, len, type, cond)
1643 #define target_remove_watchpoint(addr, len, type, cond) \
1644 (*current_target.to_remove_watchpoint) (¤t_target, \
1645 addr, len, type, cond)
1647 /* Insert a new masked watchpoint at ADDR using the mask MASK.
1648 RW may be hw_read for a read watchpoint, hw_write for a write watchpoint
1649 or hw_access for an access watchpoint. Returns 0 for success, 1 if
1650 masked watchpoints are not supported, -1 for failure. */
1652 extern int target_insert_mask_watchpoint (CORE_ADDR, CORE_ADDR, int);
1654 /* Remove a masked watchpoint at ADDR with the mask MASK.
1655 RW may be hw_read for a read watchpoint, hw_write for a write watchpoint
1656 or hw_access for an access watchpoint. Returns 0 for success, non-zero
1659 extern int target_remove_mask_watchpoint (CORE_ADDR, CORE_ADDR, int);
1661 /* Insert a hardware breakpoint at address BP_TGT->placed_address in
1662 the target machine. Returns 0 for success, and returns non-zero or
1663 throws an error (with a detailed failure reason error code and
1664 message) otherwise. */
1666 #define target_insert_hw_breakpoint(gdbarch, bp_tgt) \
1667 (*current_target.to_insert_hw_breakpoint) (¤t_target, \
1670 #define target_remove_hw_breakpoint(gdbarch, bp_tgt) \
1671 (*current_target.to_remove_hw_breakpoint) (¤t_target, \
1674 /* Return number of debug registers needed for a ranged breakpoint,
1675 or -1 if ranged breakpoints are not supported. */
1677 extern int target_ranged_break_num_registers (void);
1679 /* Return non-zero if target knows the data address which triggered this
1680 target_stopped_by_watchpoint, in such case place it to *ADDR_P. Only the
1681 INFERIOR_PTID task is being queried. */
1682 #define target_stopped_data_address(target, addr_p) \
1683 (*target.to_stopped_data_address) (target, addr_p)
1685 /* Return non-zero if ADDR is within the range of a watchpoint spanning
1686 LENGTH bytes beginning at START. */
1687 #define target_watchpoint_addr_within_range(target, addr, start, length) \
1688 (*target.to_watchpoint_addr_within_range) (target, addr, start, length)
1690 /* Return non-zero if the target is capable of using hardware to evaluate
1691 the condition expression. In this case, if the condition is false when
1692 the watched memory location changes, execution may continue without the
1693 debugger being notified.
1695 Due to limitations in the hardware implementation, it may be capable of
1696 avoiding triggering the watchpoint in some cases where the condition
1697 expression is false, but may report some false positives as well.
1698 For this reason, GDB will still evaluate the condition expression when
1699 the watchpoint triggers. */
1700 #define target_can_accel_watchpoint_condition(addr, len, type, cond) \
1701 (*current_target.to_can_accel_watchpoint_condition) (¤t_target, \
1702 addr, len, type, cond)
1704 /* Return number of debug registers needed for a masked watchpoint,
1705 -1 if masked watchpoints are not supported or -2 if the given address
1706 and mask combination cannot be used. */
1708 extern int target_masked_watch_num_registers (CORE_ADDR addr, CORE_ADDR mask);
1710 /* Target can execute in reverse? */
1711 #define target_can_execute_reverse \
1712 (current_target.to_can_execute_reverse ? \
1713 current_target.to_can_execute_reverse (¤t_target) : 0)
1715 extern const struct target_desc *target_read_description (struct target_ops *);
1717 #define target_get_ada_task_ptid(lwp, tid) \
1718 (*current_target.to_get_ada_task_ptid) (¤t_target, lwp,tid)
1720 /* Utility implementation of searching memory. */
1721 extern int simple_search_memory (struct target_ops* ops,
1722 CORE_ADDR start_addr,
1723 ULONGEST search_space_len,
1724 const gdb_byte *pattern,
1725 ULONGEST pattern_len,
1726 CORE_ADDR *found_addrp);
1728 /* Main entry point for searching memory. */
1729 extern int target_search_memory (CORE_ADDR start_addr,
1730 ULONGEST search_space_len,
1731 const gdb_byte *pattern,
1732 ULONGEST pattern_len,
1733 CORE_ADDR *found_addrp);
1735 /* Target file operations. */
1737 /* Open FILENAME on the target, using FLAGS and MODE. Return a
1738 target file descriptor, or -1 if an error occurs (and set
1740 extern int target_fileio_open (const char *filename, int flags, int mode,
1743 /* Write up to LEN bytes from WRITE_BUF to FD on the target.
1744 Return the number of bytes written, or -1 if an error occurs
1745 (and set *TARGET_ERRNO). */
1746 extern int target_fileio_pwrite (int fd, const gdb_byte *write_buf, int len,
1747 ULONGEST offset, int *target_errno);
1749 /* Read up to LEN bytes FD on the target into READ_BUF.
1750 Return the number of bytes read, or -1 if an error occurs
1751 (and set *TARGET_ERRNO). */
1752 extern int target_fileio_pread (int fd, gdb_byte *read_buf, int len,
1753 ULONGEST offset, int *target_errno);
1755 /* Close FD on the target. Return 0, or -1 if an error occurs
1756 (and set *TARGET_ERRNO). */
1757 extern int target_fileio_close (int fd, int *target_errno);
1759 /* Unlink FILENAME on the target. Return 0, or -1 if an error
1760 occurs (and set *TARGET_ERRNO). */
1761 extern int target_fileio_unlink (const char *filename, int *target_errno);
1763 /* Read value of symbolic link FILENAME on the target. Return a
1764 null-terminated string allocated via xmalloc, or NULL if an error
1765 occurs (and set *TARGET_ERRNO). */
1766 extern char *target_fileio_readlink (const char *filename, int *target_errno);
1768 /* Read target file FILENAME. The return value will be -1 if the transfer
1769 fails or is not supported; 0 if the object is empty; or the length
1770 of the object otherwise. If a positive value is returned, a
1771 sufficiently large buffer will be allocated using xmalloc and
1772 returned in *BUF_P containing the contents of the object.
1774 This method should be used for objects sufficiently small to store
1775 in a single xmalloc'd buffer, when no fixed bound on the object's
1776 size is known in advance. */
1777 extern LONGEST target_fileio_read_alloc (const char *filename,
1780 /* Read target file FILENAME. The result is NUL-terminated and
1781 returned as a string, allocated using xmalloc. If an error occurs
1782 or the transfer is unsupported, NULL is returned. Empty objects
1783 are returned as allocated but empty strings. A warning is issued
1784 if the result contains any embedded NUL bytes. */
1785 extern char *target_fileio_read_stralloc (const char *filename);
1788 /* Tracepoint-related operations. */
1790 #define target_trace_init() \
1791 (*current_target.to_trace_init) (¤t_target)
1793 #define target_download_tracepoint(t) \
1794 (*current_target.to_download_tracepoint) (¤t_target, t)
1796 #define target_can_download_tracepoint() \
1797 (*current_target.to_can_download_tracepoint) (¤t_target)
1799 #define target_download_trace_state_variable(tsv) \
1800 (*current_target.to_download_trace_state_variable) (¤t_target, tsv)
1802 #define target_enable_tracepoint(loc) \
1803 (*current_target.to_enable_tracepoint) (¤t_target, loc)
1805 #define target_disable_tracepoint(loc) \
1806 (*current_target.to_disable_tracepoint) (¤t_target, loc)
1808 #define target_trace_start() \
1809 (*current_target.to_trace_start) (¤t_target)
1811 #define target_trace_set_readonly_regions() \
1812 (*current_target.to_trace_set_readonly_regions) (¤t_target)
1814 #define target_get_trace_status(ts) \
1815 (*current_target.to_get_trace_status) (¤t_target, ts)
1817 #define target_get_tracepoint_status(tp,utp) \
1818 (*current_target.to_get_tracepoint_status) (¤t_target, tp, utp)
1820 #define target_trace_stop() \
1821 (*current_target.to_trace_stop) (¤t_target)
1823 #define target_trace_find(type,num,addr1,addr2,tpp) \
1824 (*current_target.to_trace_find) (¤t_target, \
1825 (type), (num), (addr1), (addr2), (tpp))
1827 #define target_get_trace_state_variable_value(tsv,val) \
1828 (*current_target.to_get_trace_state_variable_value) (¤t_target, \
1831 #define target_save_trace_data(filename) \
1832 (*current_target.to_save_trace_data) (filename)
1834 #define target_upload_tracepoints(utpp) \
1835 (*current_target.to_upload_tracepoints) (utpp)
1837 #define target_upload_trace_state_variables(utsvp) \
1838 (*current_target.to_upload_trace_state_variables) (utsvp)
1840 #define target_get_raw_trace_data(buf,offset,len) \
1841 (*current_target.to_get_raw_trace_data) ((buf), (offset), (len))
1843 #define target_get_min_fast_tracepoint_insn_len() \
1844 (*current_target.to_get_min_fast_tracepoint_insn_len) ()
1846 #define target_set_disconnected_tracing(val) \
1847 (*current_target.to_set_disconnected_tracing) (val)
1849 #define target_set_circular_trace_buffer(val) \
1850 (*current_target.to_set_circular_trace_buffer) (val)
1852 #define target_set_trace_buffer_size(val) \
1853 (*current_target.to_set_trace_buffer_size) (val)
1855 #define target_set_trace_notes(user,notes,stopnotes) \
1856 (*current_target.to_set_trace_notes) ((user), (notes), (stopnotes))
1858 #define target_get_tib_address(ptid, addr) \
1859 (*current_target.to_get_tib_address) ((ptid), (addr))
1861 #define target_set_permissions() \
1862 (*current_target.to_set_permissions) ()
1864 #define target_static_tracepoint_marker_at(addr, marker) \
1865 (*current_target.to_static_tracepoint_marker_at) (addr, marker)
1867 #define target_static_tracepoint_markers_by_strid(marker_id) \
1868 (*current_target.to_static_tracepoint_markers_by_strid) (marker_id)
1870 #define target_traceframe_info() \
1871 (*current_target.to_traceframe_info) ()
1873 #define target_use_agent(use) \
1874 (*current_target.to_use_agent) (use)
1876 #define target_can_use_agent() \
1877 (*current_target.to_can_use_agent) ()
1879 #define target_augmented_libraries_svr4_read() \
1880 (*current_target.to_augmented_libraries_svr4_read) ()
1882 /* Command logging facility. */
1884 #define target_log_command(p) \
1886 if (current_target.to_log_command) \
1887 (*current_target.to_log_command) (¤t_target, \
1892 extern int target_core_of_thread (ptid_t ptid);
1894 /* See to_get_unwinder in struct target_ops. */
1895 extern const struct frame_unwind *target_get_unwinder (void);
1897 /* See to_get_tailcall_unwinder in struct target_ops. */
1898 extern const struct frame_unwind *target_get_tailcall_unwinder (void);
1900 /* Verify that the memory in the [MEMADDR, MEMADDR+SIZE) range matches
1901 the contents of [DATA,DATA+SIZE). Returns 1 if there's a match, 0
1902 if there's a mismatch, and -1 if an error is encountered while
1903 reading memory. Throws an error if the functionality is found not
1904 to be supported by the current target. */
1905 int target_verify_memory (const gdb_byte *data,
1906 CORE_ADDR memaddr, ULONGEST size);
1908 /* Routines for maintenance of the target structures...
1910 complete_target_initialization: Finalize a target_ops by filling in
1911 any fields needed by the target implementation.
1913 add_target: Add a target to the list of all possible targets.
1915 push_target: Make this target the top of the stack of currently used
1916 targets, within its particular stratum of the stack. Result
1917 is 0 if now atop the stack, nonzero if not on top (maybe
1920 unpush_target: Remove this from the stack of currently used targets,
1921 no matter where it is on the list. Returns 0 if no
1922 change, 1 if removed from stack. */
1924 extern void add_target (struct target_ops *);
1926 extern void add_target_with_completer (struct target_ops *t,
1927 completer_ftype *completer);
1929 extern void complete_target_initialization (struct target_ops *t);
1931 /* Adds a command ALIAS for target T and marks it deprecated. This is useful
1932 for maintaining backwards compatibility when renaming targets. */
1934 extern void add_deprecated_target_alias (struct target_ops *t, char *alias);
1936 extern void push_target (struct target_ops *);
1938 extern int unpush_target (struct target_ops *);
1940 extern void target_pre_inferior (int);
1942 extern void target_preopen (int);
1944 /* Does whatever cleanup is required to get rid of all pushed targets. */
1945 extern void pop_all_targets (void);
1947 /* Like pop_all_targets, but pops only targets whose stratum is
1948 strictly above ABOVE_STRATUM. */
1949 extern void pop_all_targets_above (enum strata above_stratum);
1951 extern int target_is_pushed (struct target_ops *t);
1953 extern CORE_ADDR target_translate_tls_address (struct objfile *objfile,
1956 /* Struct target_section maps address ranges to file sections. It is
1957 mostly used with BFD files, but can be used without (e.g. for handling
1958 raw disks, or files not in formats handled by BFD). */
1960 struct target_section
1962 CORE_ADDR addr; /* Lowest address in section */
1963 CORE_ADDR endaddr; /* 1+highest address in section */
1965 struct bfd_section *the_bfd_section;
1967 /* The "owner" of the section.
1968 It can be any unique value. It is set by add_target_sections
1969 and used by remove_target_sections.
1970 For example, for executables it is a pointer to exec_bfd and
1971 for shlibs it is the so_list pointer. */
1975 /* Holds an array of target sections. Defined by [SECTIONS..SECTIONS_END[. */
1977 struct target_section_table
1979 struct target_section *sections;
1980 struct target_section *sections_end;
1983 /* Return the "section" containing the specified address. */
1984 struct target_section *target_section_by_addr (struct target_ops *target,
1987 /* Return the target section table this target (or the targets
1988 beneath) currently manipulate. */
1990 extern struct target_section_table *target_get_section_table
1991 (struct target_ops *target);
1993 /* From mem-break.c */
1995 extern int memory_remove_breakpoint (struct target_ops *, struct gdbarch *,
1996 struct bp_target_info *);
1998 extern int memory_insert_breakpoint (struct target_ops *, struct gdbarch *,
1999 struct bp_target_info *);
2001 extern int default_memory_remove_breakpoint (struct gdbarch *,
2002 struct bp_target_info *);
2004 extern int default_memory_insert_breakpoint (struct gdbarch *,
2005 struct bp_target_info *);
2010 extern void initialize_targets (void);
2012 extern void noprocess (void) ATTRIBUTE_NORETURN;
2014 extern void target_require_runnable (void);
2016 extern void find_default_attach (struct target_ops *, char *, int);
2018 extern void find_default_create_inferior (struct target_ops *,
2019 char *, char *, char **, int);
2021 extern struct target_ops *find_target_beneath (struct target_ops *);
2023 /* Find the target at STRATUM. If no target is at that stratum,
2026 struct target_ops *find_target_at (enum strata stratum);
2028 /* Read OS data object of type TYPE from the target, and return it in
2029 XML format. The result is NUL-terminated and returned as a string,
2030 allocated using xmalloc. If an error occurs or the transfer is
2031 unsupported, NULL is returned. Empty objects are returned as
2032 allocated but empty strings. */
2034 extern char *target_get_osdata (const char *type);
2037 /* Stuff that should be shared among the various remote targets. */
2039 /* Debugging level. 0 is off, and non-zero values mean to print some debug
2040 information (higher values, more information). */
2041 extern int remote_debug;
2043 /* Speed in bits per second, or -1 which means don't mess with the speed. */
2044 extern int baud_rate;
2045 /* Timeout limit for response from target. */
2046 extern int remote_timeout;
2050 /* Set the show memory breakpoints mode to show, and installs a cleanup
2051 to restore it back to the current value. */
2052 extern struct cleanup *make_show_memory_breakpoints_cleanup (int show);
2054 extern int may_write_registers;
2055 extern int may_write_memory;
2056 extern int may_insert_breakpoints;
2057 extern int may_insert_tracepoints;
2058 extern int may_insert_fast_tracepoints;
2059 extern int may_stop;
2061 extern void update_target_permissions (void);
2064 /* Imported from machine dependent code. */
2066 /* Blank target vector entries are initialized to target_ignore. */
2067 void target_ignore (void);
2069 /* See to_supports_btrace in struct target_ops. */
2070 #define target_supports_btrace() \
2071 (current_target.to_supports_btrace (¤t_target))
2073 /* See to_enable_btrace in struct target_ops. */
2074 extern struct btrace_target_info *target_enable_btrace (ptid_t ptid);
2076 /* See to_disable_btrace in struct target_ops. */
2077 extern void target_disable_btrace (struct btrace_target_info *btinfo);
2079 /* See to_teardown_btrace in struct target_ops. */
2080 extern void target_teardown_btrace (struct btrace_target_info *btinfo);
2082 /* See to_read_btrace in struct target_ops. */
2083 extern enum btrace_error target_read_btrace (VEC (btrace_block_s) **,
2084 struct btrace_target_info *,
2085 enum btrace_read_type);
2087 /* See to_stop_recording in struct target_ops. */
2088 extern void target_stop_recording (void);
2090 /* See to_info_record in struct target_ops. */
2091 extern void target_info_record (void);
2093 /* See to_save_record in struct target_ops. */
2094 extern void target_save_record (const char *filename);
2096 /* Query if the target supports deleting the execution log. */
2097 extern int target_supports_delete_record (void);
2099 /* See to_delete_record in struct target_ops. */
2100 extern void target_delete_record (void);
2102 /* See to_record_is_replaying in struct target_ops. */
2103 extern int target_record_is_replaying (void);
2105 /* See to_goto_record_begin in struct target_ops. */
2106 extern void target_goto_record_begin (void);
2108 /* See to_goto_record_end in struct target_ops. */
2109 extern void target_goto_record_end (void);
2111 /* See to_goto_record in struct target_ops. */
2112 extern void target_goto_record (ULONGEST insn);
2114 /* See to_insn_history. */
2115 extern void target_insn_history (int size, int flags);
2117 /* See to_insn_history_from. */
2118 extern void target_insn_history_from (ULONGEST from, int size, int flags);
2120 /* See to_insn_history_range. */
2121 extern void target_insn_history_range (ULONGEST begin, ULONGEST end, int flags);
2123 /* See to_call_history. */
2124 extern void target_call_history (int size, int flags);
2126 /* See to_call_history_from. */
2127 extern void target_call_history_from (ULONGEST begin, int size, int flags);
2129 /* See to_call_history_range. */
2130 extern void target_call_history_range (ULONGEST begin, ULONGEST end, int flags);
2132 /* See to_decr_pc_after_break. Start searching for the target at OPS. */
2133 extern CORE_ADDR forward_target_decr_pc_after_break (struct target_ops *ops,
2134 struct gdbarch *gdbarch);
2136 /* See to_decr_pc_after_break. */
2137 extern CORE_ADDR target_decr_pc_after_break (struct gdbarch *gdbarch);
2139 #endif /* !defined (TARGET_H) */