gdb/record-full: Use xmalloc instead of alloca for temporary memory storage.
[external/binutils.git] / gdb / record-full.c
1 /* Process record and replay target for GDB, the GNU debugger.
2
3    Copyright (C) 2013-2015 Free Software Foundation, Inc.
4
5    This file is part of GDB.
6
7    This program is free software; you can redistribute it and/or modify
8    it under the terms of the GNU General Public License as published by
9    the Free Software Foundation; either version 3 of the License, or
10    (at your option) any later version.
11
12    This program is distributed in the hope that it will be useful,
13    but WITHOUT ANY WARRANTY; without even the implied warranty of
14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15    GNU General Public License for more details.
16
17    You should have received a copy of the GNU General Public License
18    along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
19
20 #include "defs.h"
21 #include "gdbcmd.h"
22 #include "regcache.h"
23 #include "gdbthread.h"
24 #include "event-top.h"
25 #include "completer.h"
26 #include "arch-utils.h"
27 #include "gdbcore.h"
28 #include "exec.h"
29 #include "record.h"
30 #include "record-full.h"
31 #include "elf-bfd.h"
32 #include "gcore.h"
33 #include "event-loop.h"
34 #include "inf-loop.h"
35 #include "gdb_bfd.h"
36 #include "observer.h"
37 #include "infrun.h"
38
39 #include <signal.h>
40
41 /* This module implements "target record-full", also known as "process
42    record and replay".  This target sits on top of a "normal" target
43    (a target that "has execution"), and provides a record and replay
44    functionality, including reverse debugging.
45
46    Target record has two modes: recording, and replaying.
47
48    In record mode, we intercept the to_resume and to_wait methods.
49    Whenever gdb resumes the target, we run the target in single step
50    mode, and we build up an execution log in which, for each executed
51    instruction, we record all changes in memory and register state.
52    This is invisible to the user, to whom it just looks like an
53    ordinary debugging session (except for performance degredation).
54
55    In replay mode, instead of actually letting the inferior run as a
56    process, we simulate its execution by playing back the recorded
57    execution log.  For each instruction in the log, we simulate the
58    instruction's side effects by duplicating the changes that it would
59    have made on memory and registers.  */
60
61 #define DEFAULT_RECORD_FULL_INSN_MAX_NUM        200000
62
63 #define RECORD_FULL_IS_REPLAY \
64      (record_full_list->next || execution_direction == EXEC_REVERSE)
65
66 #define RECORD_FULL_FILE_MAGIC  netorder32(0x20091016)
67
68 /* These are the core structs of the process record functionality.
69
70    A record_full_entry is a record of the value change of a register
71    ("record_full_reg") or a part of memory ("record_full_mem").  And each
72    instruction must have a struct record_full_entry ("record_full_end")
73    that indicates that this is the last struct record_full_entry of this
74    instruction.
75
76    Each struct record_full_entry is linked to "record_full_list" by "prev"
77    and "next" pointers.  */
78
79 struct record_full_mem_entry
80 {
81   CORE_ADDR addr;
82   int len;
83   /* Set this flag if target memory for this entry
84      can no longer be accessed.  */
85   int mem_entry_not_accessible;
86   union
87   {
88     gdb_byte *ptr;
89     gdb_byte buf[sizeof (gdb_byte *)];
90   } u;
91 };
92
93 struct record_full_reg_entry
94 {
95   unsigned short num;
96   unsigned short len;
97   union 
98   {
99     gdb_byte *ptr;
100     gdb_byte buf[2 * sizeof (gdb_byte *)];
101   } u;
102 };
103
104 struct record_full_end_entry
105 {
106   enum gdb_signal sigval;
107   ULONGEST insn_num;
108 };
109
110 enum record_full_type
111 {
112   record_full_end = 0,
113   record_full_reg,
114   record_full_mem
115 };
116
117 /* This is the data structure that makes up the execution log.
118
119    The execution log consists of a single linked list of entries
120    of type "struct record_full_entry".  It is doubly linked so that it
121    can be traversed in either direction.
122
123    The start of the list is anchored by a struct called
124    "record_full_first".  The pointer "record_full_list" either points
125    to the last entry that was added to the list (in record mode), or to
126    the next entry in the list that will be executed (in replay mode).
127
128    Each list element (struct record_full_entry), in addition to next
129    and prev pointers, consists of a union of three entry types: mem,
130    reg, and end.  A field called "type" determines which entry type is
131    represented by a given list element.
132
133    Each instruction that is added to the execution log is represented
134    by a variable number of list elements ('entries').  The instruction
135    will have one "reg" entry for each register that is changed by 
136    executing the instruction (including the PC in every case).  It 
137    will also have one "mem" entry for each memory change.  Finally,
138    each instruction will have an "end" entry that separates it from
139    the changes associated with the next instruction.  */
140
141 struct record_full_entry
142 {
143   struct record_full_entry *prev;
144   struct record_full_entry *next;
145   enum record_full_type type;
146   union
147   {
148     /* reg */
149     struct record_full_reg_entry reg;
150     /* mem */
151     struct record_full_mem_entry mem;
152     /* end */
153     struct record_full_end_entry end;
154   } u;
155 };
156
157 /* If true, query if PREC cannot record memory
158    change of next instruction.  */
159 int record_full_memory_query = 0;
160
161 struct record_full_core_buf_entry
162 {
163   struct record_full_core_buf_entry *prev;
164   struct target_section *p;
165   bfd_byte *buf;
166 };
167
168 /* Record buf with core target.  */
169 static gdb_byte *record_full_core_regbuf = NULL;
170 static struct target_section *record_full_core_start;
171 static struct target_section *record_full_core_end;
172 static struct record_full_core_buf_entry *record_full_core_buf_list = NULL;
173
174 /* The following variables are used for managing the linked list that
175    represents the execution log.
176
177    record_full_first is the anchor that holds down the beginning of
178    the list.
179
180    record_full_list serves two functions:
181      1) In record mode, it anchors the end of the list.
182      2) In replay mode, it traverses the list and points to
183         the next instruction that must be emulated.
184
185    record_full_arch_list_head and record_full_arch_list_tail are used
186    to manage a separate list, which is used to build up the change
187    elements of the currently executing instruction during record mode.
188    When this instruction has been completely annotated in the "arch
189    list", it will be appended to the main execution log.  */
190
191 static struct record_full_entry record_full_first;
192 static struct record_full_entry *record_full_list = &record_full_first;
193 static struct record_full_entry *record_full_arch_list_head = NULL;
194 static struct record_full_entry *record_full_arch_list_tail = NULL;
195
196 /* 1 ask user. 0 auto delete the last struct record_full_entry.  */
197 static int record_full_stop_at_limit = 1;
198 /* Maximum allowed number of insns in execution log.  */
199 static unsigned int record_full_insn_max_num
200         = DEFAULT_RECORD_FULL_INSN_MAX_NUM;
201 /* Actual count of insns presently in execution log.  */
202 static unsigned int record_full_insn_num = 0;
203 /* Count of insns logged so far (may be larger
204    than count of insns presently in execution log).  */
205 static ULONGEST record_full_insn_count;
206
207 /* The target_ops of process record.  */
208 static struct target_ops record_full_ops;
209 static struct target_ops record_full_core_ops;
210
211 /* See record-full.h.  */
212
213 int
214 record_full_is_used (void)
215 {
216   struct target_ops *t;
217
218   t = find_record_target ();
219   return (t == &record_full_ops
220           || t == &record_full_core_ops);
221 }
222
223
224 /* Command lists for "set/show record full".  */
225 static struct cmd_list_element *set_record_full_cmdlist;
226 static struct cmd_list_element *show_record_full_cmdlist;
227
228 /* Command list for "record full".  */
229 static struct cmd_list_element *record_full_cmdlist;
230
231 static void record_full_goto_insn (struct record_full_entry *entry,
232                                    enum exec_direction_kind dir);
233 static void record_full_save (struct target_ops *self,
234                               const char *recfilename);
235
236 /* Alloc and free functions for record_full_reg, record_full_mem, and
237    record_full_end entries.  */
238
239 /* Alloc a record_full_reg record entry.  */
240
241 static inline struct record_full_entry *
242 record_full_reg_alloc (struct regcache *regcache, int regnum)
243 {
244   struct record_full_entry *rec;
245   struct gdbarch *gdbarch = get_regcache_arch (regcache);
246
247   rec = XCNEW (struct record_full_entry);
248   rec->type = record_full_reg;
249   rec->u.reg.num = regnum;
250   rec->u.reg.len = register_size (gdbarch, regnum);
251   if (rec->u.reg.len > sizeof (rec->u.reg.u.buf))
252     rec->u.reg.u.ptr = (gdb_byte *) xmalloc (rec->u.reg.len);
253
254   return rec;
255 }
256
257 /* Free a record_full_reg record entry.  */
258
259 static inline void
260 record_full_reg_release (struct record_full_entry *rec)
261 {
262   gdb_assert (rec->type == record_full_reg);
263   if (rec->u.reg.len > sizeof (rec->u.reg.u.buf))
264     xfree (rec->u.reg.u.ptr);
265   xfree (rec);
266 }
267
268 /* Alloc a record_full_mem record entry.  */
269
270 static inline struct record_full_entry *
271 record_full_mem_alloc (CORE_ADDR addr, int len)
272 {
273   struct record_full_entry *rec;
274
275   rec = XCNEW (struct record_full_entry);
276   rec->type = record_full_mem;
277   rec->u.mem.addr = addr;
278   rec->u.mem.len = len;
279   if (rec->u.mem.len > sizeof (rec->u.mem.u.buf))
280     rec->u.mem.u.ptr = (gdb_byte *) xmalloc (len);
281
282   return rec;
283 }
284
285 /* Free a record_full_mem record entry.  */
286
287 static inline void
288 record_full_mem_release (struct record_full_entry *rec)
289 {
290   gdb_assert (rec->type == record_full_mem);
291   if (rec->u.mem.len > sizeof (rec->u.mem.u.buf))
292     xfree (rec->u.mem.u.ptr);
293   xfree (rec);
294 }
295
296 /* Alloc a record_full_end record entry.  */
297
298 static inline struct record_full_entry *
299 record_full_end_alloc (void)
300 {
301   struct record_full_entry *rec;
302
303   rec = XCNEW (struct record_full_entry);
304   rec->type = record_full_end;
305
306   return rec;
307 }
308
309 /* Free a record_full_end record entry.  */
310
311 static inline void
312 record_full_end_release (struct record_full_entry *rec)
313 {
314   xfree (rec);
315 }
316
317 /* Free one record entry, any type.
318    Return entry->type, in case caller wants to know.  */
319
320 static inline enum record_full_type
321 record_full_entry_release (struct record_full_entry *rec)
322 {
323   enum record_full_type type = rec->type;
324
325   switch (type) {
326   case record_full_reg:
327     record_full_reg_release (rec);
328     break;
329   case record_full_mem:
330     record_full_mem_release (rec);
331     break;
332   case record_full_end:
333     record_full_end_release (rec);
334     break;
335   }
336   return type;
337 }
338
339 /* Free all record entries in list pointed to by REC.  */
340
341 static void
342 record_full_list_release (struct record_full_entry *rec)
343 {
344   if (!rec)
345     return;
346
347   while (rec->next)
348     rec = rec->next;
349
350   while (rec->prev)
351     {
352       rec = rec->prev;
353       record_full_entry_release (rec->next);
354     }
355
356   if (rec == &record_full_first)
357     {
358       record_full_insn_num = 0;
359       record_full_first.next = NULL;
360     }
361   else
362     record_full_entry_release (rec);
363 }
364
365 /* Free all record entries forward of the given list position.  */
366
367 static void
368 record_full_list_release_following (struct record_full_entry *rec)
369 {
370   struct record_full_entry *tmp = rec->next;
371
372   rec->next = NULL;
373   while (tmp)
374     {
375       rec = tmp->next;
376       if (record_full_entry_release (tmp) == record_full_end)
377         {
378           record_full_insn_num--;
379           record_full_insn_count--;
380         }
381       tmp = rec;
382     }
383 }
384
385 /* Delete the first instruction from the beginning of the log, to make
386    room for adding a new instruction at the end of the log.
387
388    Note -- this function does not modify record_full_insn_num.  */
389
390 static void
391 record_full_list_release_first (void)
392 {
393   struct record_full_entry *tmp;
394
395   if (!record_full_first.next)
396     return;
397
398   /* Loop until a record_full_end.  */
399   while (1)
400     {
401       /* Cut record_full_first.next out of the linked list.  */
402       tmp = record_full_first.next;
403       record_full_first.next = tmp->next;
404       tmp->next->prev = &record_full_first;
405
406       /* tmp is now isolated, and can be deleted.  */
407       if (record_full_entry_release (tmp) == record_full_end)
408         break;  /* End loop at first record_full_end.  */
409
410       if (!record_full_first.next)
411         {
412           gdb_assert (record_full_insn_num == 1);
413           break;        /* End loop when list is empty.  */
414         }
415     }
416 }
417
418 /* Add a struct record_full_entry to record_full_arch_list.  */
419
420 static void
421 record_full_arch_list_add (struct record_full_entry *rec)
422 {
423   if (record_debug > 1)
424     fprintf_unfiltered (gdb_stdlog,
425                         "Process record: record_full_arch_list_add %s.\n",
426                         host_address_to_string (rec));
427
428   if (record_full_arch_list_tail)
429     {
430       record_full_arch_list_tail->next = rec;
431       rec->prev = record_full_arch_list_tail;
432       record_full_arch_list_tail = rec;
433     }
434   else
435     {
436       record_full_arch_list_head = rec;
437       record_full_arch_list_tail = rec;
438     }
439 }
440
441 /* Return the value storage location of a record entry.  */
442 static inline gdb_byte *
443 record_full_get_loc (struct record_full_entry *rec)
444 {
445   switch (rec->type) {
446   case record_full_mem:
447     if (rec->u.mem.len > sizeof (rec->u.mem.u.buf))
448       return rec->u.mem.u.ptr;
449     else
450       return rec->u.mem.u.buf;
451   case record_full_reg:
452     if (rec->u.reg.len > sizeof (rec->u.reg.u.buf))
453       return rec->u.reg.u.ptr;
454     else
455       return rec->u.reg.u.buf;
456   case record_full_end:
457   default:
458     gdb_assert_not_reached ("unexpected record_full_entry type");
459     return NULL;
460   }
461 }
462
463 /* Record the value of a register NUM to record_full_arch_list.  */
464
465 int
466 record_full_arch_list_add_reg (struct regcache *regcache, int regnum)
467 {
468   struct record_full_entry *rec;
469
470   if (record_debug > 1)
471     fprintf_unfiltered (gdb_stdlog,
472                         "Process record: add register num = %d to "
473                         "record list.\n",
474                         regnum);
475
476   rec = record_full_reg_alloc (regcache, regnum);
477
478   regcache_raw_read (regcache, regnum, record_full_get_loc (rec));
479
480   record_full_arch_list_add (rec);
481
482   return 0;
483 }
484
485 /* Record the value of a region of memory whose address is ADDR and
486    length is LEN to record_full_arch_list.  */
487
488 int
489 record_full_arch_list_add_mem (CORE_ADDR addr, int len)
490 {
491   struct record_full_entry *rec;
492
493   if (record_debug > 1)
494     fprintf_unfiltered (gdb_stdlog,
495                         "Process record: add mem addr = %s len = %d to "
496                         "record list.\n",
497                         paddress (target_gdbarch (), addr), len);
498
499   if (!addr)    /* FIXME: Why?  Some arch must permit it...  */
500     return 0;
501
502   rec = record_full_mem_alloc (addr, len);
503
504   if (record_read_memory (target_gdbarch (), addr,
505                           record_full_get_loc (rec), len))
506     {
507       record_full_mem_release (rec);
508       return -1;
509     }
510
511   record_full_arch_list_add (rec);
512
513   return 0;
514 }
515
516 /* Add a record_full_end type struct record_full_entry to
517    record_full_arch_list.  */
518
519 int
520 record_full_arch_list_add_end (void)
521 {
522   struct record_full_entry *rec;
523
524   if (record_debug > 1)
525     fprintf_unfiltered (gdb_stdlog,
526                         "Process record: add end to arch list.\n");
527
528   rec = record_full_end_alloc ();
529   rec->u.end.sigval = GDB_SIGNAL_0;
530   rec->u.end.insn_num = ++record_full_insn_count;
531
532   record_full_arch_list_add (rec);
533
534   return 0;
535 }
536
537 static void
538 record_full_check_insn_num (int set_terminal)
539 {
540   if (record_full_insn_num == record_full_insn_max_num)
541     {
542       /* Ask user what to do.  */
543       if (record_full_stop_at_limit)
544         {
545           int q;
546
547           if (set_terminal)
548             target_terminal_ours ();
549           q = yquery (_("Do you want to auto delete previous execution "
550                         "log entries when record/replay buffer becomes "
551                         "full (record full stop-at-limit)?"));
552           if (set_terminal)
553             target_terminal_inferior ();
554           if (q)
555             record_full_stop_at_limit = 0;
556           else
557             error (_("Process record: stopped by user."));
558         }
559     }
560 }
561
562 static void
563 record_full_arch_list_cleanups (void *ignore)
564 {
565   record_full_list_release (record_full_arch_list_tail);
566 }
567
568 /* Before inferior step (when GDB record the running message, inferior
569    only can step), GDB will call this function to record the values to
570    record_full_list.  This function will call gdbarch_process_record to
571    record the running message of inferior and set them to
572    record_full_arch_list, and add it to record_full_list.  */
573
574 static int
575 record_full_message (struct regcache *regcache, enum gdb_signal signal)
576 {
577   int ret;
578   struct gdbarch *gdbarch = get_regcache_arch (regcache);
579   struct cleanup *old_cleanups
580     = make_cleanup (record_full_arch_list_cleanups, 0);
581
582   record_full_arch_list_head = NULL;
583   record_full_arch_list_tail = NULL;
584
585   /* Check record_full_insn_num.  */
586   record_full_check_insn_num (1);
587
588   /* If gdb sends a signal value to target_resume,
589      save it in the 'end' field of the previous instruction.
590
591      Maybe process record should record what really happened,
592      rather than what gdb pretends has happened.
593
594      So if Linux delivered the signal to the child process during
595      the record mode, we will record it and deliver it again in
596      the replay mode.
597
598      If user says "ignore this signal" during the record mode, then
599      it will be ignored again during the replay mode (no matter if
600      the user says something different, like "deliver this signal"
601      during the replay mode).
602
603      User should understand that nothing he does during the replay
604      mode will change the behavior of the child.  If he tries,
605      then that is a user error.
606
607      But we should still deliver the signal to gdb during the replay,
608      if we delivered it during the recording.  Therefore we should
609      record the signal during record_full_wait, not
610      record_full_resume.  */
611   if (record_full_list != &record_full_first)  /* FIXME better way to check */
612     {
613       gdb_assert (record_full_list->type == record_full_end);
614       record_full_list->u.end.sigval = signal;
615     }
616
617   if (signal == GDB_SIGNAL_0
618       || !gdbarch_process_record_signal_p (gdbarch))
619     ret = gdbarch_process_record (gdbarch,
620                                   regcache,
621                                   regcache_read_pc (regcache));
622   else
623     ret = gdbarch_process_record_signal (gdbarch,
624                                          regcache,
625                                          signal);
626
627   if (ret > 0)
628     error (_("Process record: inferior program stopped."));
629   if (ret < 0)
630     error (_("Process record: failed to record execution log."));
631
632   discard_cleanups (old_cleanups);
633
634   record_full_list->next = record_full_arch_list_head;
635   record_full_arch_list_head->prev = record_full_list;
636   record_full_list = record_full_arch_list_tail;
637
638   if (record_full_insn_num == record_full_insn_max_num)
639     record_full_list_release_first ();
640   else
641     record_full_insn_num++;
642
643   return 1;
644 }
645
646 struct record_full_message_args {
647   struct regcache *regcache;
648   enum gdb_signal signal;
649 };
650
651 static int
652 record_full_message_wrapper (void *args)
653 {
654   struct record_full_message_args *record_full_args
655     = (struct record_full_message_args *) args;
656
657   return record_full_message (record_full_args->regcache,
658                               record_full_args->signal);
659 }
660
661 static int
662 record_full_message_wrapper_safe (struct regcache *regcache,
663                                   enum gdb_signal signal)
664 {
665   struct record_full_message_args args;
666
667   args.regcache = regcache;
668   args.signal = signal;
669
670   return catch_errors (record_full_message_wrapper, &args, "",
671                        RETURN_MASK_ALL);
672 }
673
674 /* Set to 1 if record_full_store_registers and record_full_xfer_partial
675    doesn't need record.  */
676
677 static int record_full_gdb_operation_disable = 0;
678
679 struct cleanup *
680 record_full_gdb_operation_disable_set (void)
681 {
682   struct cleanup *old_cleanups = NULL;
683
684   old_cleanups =
685     make_cleanup_restore_integer (&record_full_gdb_operation_disable);
686   record_full_gdb_operation_disable = 1;
687
688   return old_cleanups;
689 }
690
691 /* Flag set to TRUE for target_stopped_by_watchpoint.  */
692 static enum target_stop_reason record_full_stop_reason
693   = TARGET_STOPPED_BY_NO_REASON;
694
695 /* Execute one instruction from the record log.  Each instruction in
696    the log will be represented by an arbitrary sequence of register
697    entries and memory entries, followed by an 'end' entry.  */
698
699 static inline void
700 record_full_exec_insn (struct regcache *regcache,
701                        struct gdbarch *gdbarch,
702                        struct record_full_entry *entry)
703 {
704   switch (entry->type)
705     {
706     case record_full_reg: /* reg */
707       {
708         gdb_byte reg[MAX_REGISTER_SIZE];
709
710         if (record_debug > 1)
711           fprintf_unfiltered (gdb_stdlog,
712                               "Process record: record_full_reg %s to "
713                               "inferior num = %d.\n",
714                               host_address_to_string (entry),
715                               entry->u.reg.num);
716
717         regcache_cooked_read (regcache, entry->u.reg.num, reg);
718         regcache_cooked_write (regcache, entry->u.reg.num, 
719                                record_full_get_loc (entry));
720         memcpy (record_full_get_loc (entry), reg, entry->u.reg.len);
721       }
722       break;
723
724     case record_full_mem: /* mem */
725       {
726         /* Nothing to do if the entry is flagged not_accessible.  */
727         if (!entry->u.mem.mem_entry_not_accessible)
728           {
729             gdb_byte *mem = (gdb_byte *) xmalloc (entry->u.mem.len);
730             struct cleanup *cleanup = make_cleanup (xfree, mem);
731
732             if (record_debug > 1)
733               fprintf_unfiltered (gdb_stdlog,
734                                   "Process record: record_full_mem %s to "
735                                   "inferior addr = %s len = %d.\n",
736                                   host_address_to_string (entry),
737                                   paddress (gdbarch, entry->u.mem.addr),
738                                   entry->u.mem.len);
739
740             if (record_read_memory (gdbarch,
741                                     entry->u.mem.addr, mem, entry->u.mem.len))
742               entry->u.mem.mem_entry_not_accessible = 1;
743             else
744               {
745                 if (target_write_memory (entry->u.mem.addr, 
746                                          record_full_get_loc (entry),
747                                          entry->u.mem.len))
748                   {
749                     entry->u.mem.mem_entry_not_accessible = 1;
750                     if (record_debug)
751                       warning (_("Process record: error writing memory at "
752                                  "addr = %s len = %d."),
753                                paddress (gdbarch, entry->u.mem.addr),
754                                entry->u.mem.len);
755                   }
756                 else
757                   {
758                     memcpy (record_full_get_loc (entry), mem,
759                             entry->u.mem.len);
760
761                     /* We've changed memory --- check if a hardware
762                        watchpoint should trap.  Note that this
763                        presently assumes the target beneath supports
764                        continuable watchpoints.  On non-continuable
765                        watchpoints target, we'll want to check this
766                        _before_ actually doing the memory change, and
767                        not doing the change at all if the watchpoint
768                        traps.  */
769                     if (hardware_watchpoint_inserted_in_range
770                         (get_regcache_aspace (regcache),
771                          entry->u.mem.addr, entry->u.mem.len))
772                       record_full_stop_reason = TARGET_STOPPED_BY_WATCHPOINT;
773                   }
774               }
775
776             do_cleanups (cleanup);
777           }
778       }
779       break;
780     }
781 }
782
783 static void record_full_restore (void);
784
785 /* Asynchronous signal handle registered as event loop source for when
786    we have pending events ready to be passed to the core.  */
787
788 static struct async_event_handler *record_full_async_inferior_event_token;
789
790 static void
791 record_full_async_inferior_event_handler (gdb_client_data data)
792 {
793   inferior_event_handler (INF_REG_EVENT, NULL);
794 }
795
796 /* Open the process record target.  */
797
798 static void
799 record_full_core_open_1 (const char *name, int from_tty)
800 {
801   struct regcache *regcache = get_current_regcache ();
802   int regnum = gdbarch_num_regs (get_regcache_arch (regcache));
803   int i;
804
805   /* Get record_full_core_regbuf.  */
806   target_fetch_registers (regcache, -1);
807   record_full_core_regbuf = (gdb_byte *) xmalloc (MAX_REGISTER_SIZE * regnum);
808   for (i = 0; i < regnum; i ++)
809     regcache_raw_collect (regcache, i,
810                           record_full_core_regbuf + MAX_REGISTER_SIZE * i);
811
812   /* Get record_full_core_start and record_full_core_end.  */
813   if (build_section_table (core_bfd, &record_full_core_start,
814                            &record_full_core_end))
815     {
816       xfree (record_full_core_regbuf);
817       record_full_core_regbuf = NULL;
818       error (_("\"%s\": Can't find sections: %s"),
819              bfd_get_filename (core_bfd), bfd_errmsg (bfd_get_error ()));
820     }
821
822   push_target (&record_full_core_ops);
823   record_full_restore ();
824 }
825
826 /* "to_open" target method for 'live' processes.  */
827
828 static void
829 record_full_open_1 (const char *name, int from_tty)
830 {
831   if (record_debug)
832     fprintf_unfiltered (gdb_stdlog, "Process record: record_full_open\n");
833
834   /* check exec */
835   if (!target_has_execution)
836     error (_("Process record: the program is not being run."));
837   if (non_stop)
838     error (_("Process record target can't debug inferior in non-stop mode "
839              "(non-stop)."));
840
841   if (!gdbarch_process_record_p (target_gdbarch ()))
842     error (_("Process record: the current architecture doesn't support "
843              "record function."));
844
845   push_target (&record_full_ops);
846 }
847
848 static void record_full_init_record_breakpoints (void);
849
850 /* "to_open" target method.  Open the process record target.  */
851
852 static void
853 record_full_open (const char *name, int from_tty)
854 {
855   struct target_ops *t;
856
857   if (record_debug)
858     fprintf_unfiltered (gdb_stdlog, "Process record: record_full_open\n");
859
860   record_preopen ();
861
862   /* Reset */
863   record_full_insn_num = 0;
864   record_full_insn_count = 0;
865   record_full_list = &record_full_first;
866   record_full_list->next = NULL;
867
868   if (core_bfd)
869     record_full_core_open_1 (name, from_tty);
870   else
871     record_full_open_1 (name, from_tty);
872
873   /* Register extra event sources in the event loop.  */
874   record_full_async_inferior_event_token
875     = create_async_event_handler (record_full_async_inferior_event_handler,
876                                   NULL);
877
878   record_full_init_record_breakpoints ();
879
880   observer_notify_record_changed (current_inferior (),  1);
881 }
882
883 /* "to_close" target method.  Close the process record target.  */
884
885 static void
886 record_full_close (struct target_ops *self)
887 {
888   struct record_full_core_buf_entry *entry;
889
890   if (record_debug)
891     fprintf_unfiltered (gdb_stdlog, "Process record: record_full_close\n");
892
893   record_full_list_release (record_full_list);
894
895   /* Release record_full_core_regbuf.  */
896   if (record_full_core_regbuf)
897     {
898       xfree (record_full_core_regbuf);
899       record_full_core_regbuf = NULL;
900     }
901
902   /* Release record_full_core_buf_list.  */
903   if (record_full_core_buf_list)
904     {
905       for (entry = record_full_core_buf_list->prev; entry;
906            entry = entry->prev)
907         {
908           xfree (record_full_core_buf_list);
909           record_full_core_buf_list = entry;
910         }
911       record_full_core_buf_list = NULL;
912     }
913
914   if (record_full_async_inferior_event_token)
915     delete_async_event_handler (&record_full_async_inferior_event_token);
916 }
917
918 /* "to_async" target method.  */
919
920 static void
921 record_full_async (struct target_ops *ops, int enable)
922 {
923   if (enable)
924     mark_async_event_handler (record_full_async_inferior_event_token);
925   else
926     clear_async_event_handler (record_full_async_inferior_event_token);
927
928   ops->beneath->to_async (ops->beneath, enable);
929 }
930
931 static int record_full_resume_step = 0;
932
933 /* True if we've been resumed, and so each record_full_wait call should
934    advance execution.  If this is false, record_full_wait will return a
935    TARGET_WAITKIND_IGNORE.  */
936 static int record_full_resumed = 0;
937
938 /* The execution direction of the last resume we got.  This is
939    necessary for async mode.  Vis (order is not strictly accurate):
940
941    1. user has the global execution direction set to forward
942    2. user does a reverse-step command
943    3. record_full_resume is called with global execution direction
944       temporarily switched to reverse
945    4. GDB's execution direction is reverted back to forward
946    5. target record notifies event loop there's an event to handle
947    6. infrun asks the target which direction was it going, and switches
948       the global execution direction accordingly (to reverse)
949    7. infrun polls an event out of the record target, and handles it
950    8. GDB goes back to the event loop, and goto #4.
951 */
952 static enum exec_direction_kind record_full_execution_dir = EXEC_FORWARD;
953
954 /* "to_resume" target method.  Resume the process record target.  */
955
956 static void
957 record_full_resume (struct target_ops *ops, ptid_t ptid, int step,
958                     enum gdb_signal signal)
959 {
960   record_full_resume_step = step;
961   record_full_resumed = 1;
962   record_full_execution_dir = execution_direction;
963
964   if (!RECORD_FULL_IS_REPLAY)
965     {
966       struct gdbarch *gdbarch = target_thread_architecture (ptid);
967
968       record_full_message (get_current_regcache (), signal);
969
970       if (!step)
971         {
972           /* This is not hard single step.  */
973           if (!gdbarch_software_single_step_p (gdbarch))
974             {
975               /* This is a normal continue.  */
976               step = 1;
977             }
978           else
979             {
980               /* This arch support soft sigle step.  */
981               if (thread_has_single_step_breakpoints_set (inferior_thread ()))
982                 {
983                   /* This is a soft single step.  */
984                   record_full_resume_step = 1;
985                 }
986               else
987                 {
988                   /* This is a continue.
989                      Try to insert a soft single step breakpoint.  */
990                   if (!gdbarch_software_single_step (gdbarch,
991                                                      get_current_frame ()))
992                     {
993                       /* This system don't want use soft single step.
994                          Use hard sigle step.  */
995                       step = 1;
996                     }
997                 }
998             }
999         }
1000
1001       /* Make sure the target beneath reports all signals.  */
1002       target_pass_signals (0, NULL);
1003
1004       ops->beneath->to_resume (ops->beneath, ptid, step, signal);
1005     }
1006
1007   /* We are about to start executing the inferior (or simulate it),
1008      let's register it with the event loop.  */
1009   if (target_can_async_p ())
1010     target_async (1);
1011 }
1012
1013 static int record_full_get_sig = 0;
1014
1015 /* SIGINT signal handler, registered by "to_wait" method.  */
1016
1017 static void
1018 record_full_sig_handler (int signo)
1019 {
1020   if (record_debug)
1021     fprintf_unfiltered (gdb_stdlog, "Process record: get a signal\n");
1022
1023   /* It will break the running inferior in replay mode.  */
1024   record_full_resume_step = 1;
1025
1026   /* It will let record_full_wait set inferior status to get the signal
1027      SIGINT.  */
1028   record_full_get_sig = 1;
1029 }
1030
1031 static void
1032 record_full_wait_cleanups (void *ignore)
1033 {
1034   if (execution_direction == EXEC_REVERSE)
1035     {
1036       if (record_full_list->next)
1037         record_full_list = record_full_list->next;
1038     }
1039   else
1040     record_full_list = record_full_list->prev;
1041 }
1042
1043 /* "to_wait" target method for process record target.
1044
1045    In record mode, the target is always run in singlestep mode
1046    (even when gdb says to continue).  The to_wait method intercepts
1047    the stop events and determines which ones are to be passed on to
1048    gdb.  Most stop events are just singlestep events that gdb is not
1049    to know about, so the to_wait method just records them and keeps
1050    singlestepping.
1051
1052    In replay mode, this function emulates the recorded execution log, 
1053    one instruction at a time (forward or backward), and determines 
1054    where to stop.  */
1055
1056 static ptid_t
1057 record_full_wait_1 (struct target_ops *ops,
1058                     ptid_t ptid, struct target_waitstatus *status,
1059                     int options)
1060 {
1061   struct cleanup *set_cleanups = record_full_gdb_operation_disable_set ();
1062
1063   if (record_debug)
1064     fprintf_unfiltered (gdb_stdlog,
1065                         "Process record: record_full_wait "
1066                         "record_full_resume_step = %d, "
1067                         "record_full_resumed = %d, direction=%s\n",
1068                         record_full_resume_step, record_full_resumed,
1069                         record_full_execution_dir == EXEC_FORWARD
1070                         ? "forward" : "reverse");
1071
1072   if (!record_full_resumed)
1073     {
1074       gdb_assert ((options & TARGET_WNOHANG) != 0);
1075
1076       /* No interesting event.  */
1077       status->kind = TARGET_WAITKIND_IGNORE;
1078       return minus_one_ptid;
1079     }
1080
1081   record_full_get_sig = 0;
1082   signal (SIGINT, record_full_sig_handler);
1083
1084   record_full_stop_reason = TARGET_STOPPED_BY_NO_REASON;
1085
1086   if (!RECORD_FULL_IS_REPLAY && ops != &record_full_core_ops)
1087     {
1088       if (record_full_resume_step)
1089         {
1090           /* This is a single step.  */
1091           return ops->beneath->to_wait (ops->beneath, ptid, status, options);
1092         }
1093       else
1094         {
1095           /* This is not a single step.  */
1096           ptid_t ret;
1097           CORE_ADDR tmp_pc;
1098           struct gdbarch *gdbarch = target_thread_architecture (inferior_ptid);
1099
1100           while (1)
1101             {
1102               struct thread_info *tp;
1103
1104               ret = ops->beneath->to_wait (ops->beneath, ptid, status, options);
1105               if (status->kind == TARGET_WAITKIND_IGNORE)
1106                 {
1107                   if (record_debug)
1108                     fprintf_unfiltered (gdb_stdlog,
1109                                         "Process record: record_full_wait "
1110                                         "target beneath not done yet\n");
1111                   return ret;
1112                 }
1113
1114               ALL_NON_EXITED_THREADS (tp)
1115                 delete_single_step_breakpoints (tp);
1116
1117               if (record_full_resume_step)
1118                 return ret;
1119
1120               /* Is this a SIGTRAP?  */
1121               if (status->kind == TARGET_WAITKIND_STOPPED
1122                   && status->value.sig == GDB_SIGNAL_TRAP)
1123                 {
1124                   struct regcache *regcache;
1125                   struct address_space *aspace;
1126                   enum target_stop_reason *stop_reason_p
1127                     = &record_full_stop_reason;
1128
1129                   /* Yes -- this is likely our single-step finishing,
1130                      but check if there's any reason the core would be
1131                      interested in the event.  */
1132
1133                   registers_changed ();
1134                   regcache = get_current_regcache ();
1135                   tmp_pc = regcache_read_pc (regcache);
1136                   aspace = get_regcache_aspace (regcache);
1137
1138                   if (target_stopped_by_watchpoint ())
1139                     {
1140                       /* Always interested in watchpoints.  */
1141                     }
1142                   else if (record_check_stopped_by_breakpoint (aspace, tmp_pc,
1143                                                                stop_reason_p))
1144                     {
1145                       /* There is a breakpoint here.  Let the core
1146                          handle it.  */
1147                     }
1148                   else
1149                     {
1150                       /* This is a single-step trap.  Record the
1151                          insn and issue another step.
1152                          FIXME: this part can be a random SIGTRAP too.
1153                          But GDB cannot handle it.  */
1154                       int step = 1;
1155
1156                       if (!record_full_message_wrapper_safe (regcache,
1157                                                              GDB_SIGNAL_0))
1158                         {
1159                            status->kind = TARGET_WAITKIND_STOPPED;
1160                            status->value.sig = GDB_SIGNAL_0;
1161                            break;
1162                         }
1163
1164                       if (gdbarch_software_single_step_p (gdbarch))
1165                         {
1166                           /* Try to insert the software single step breakpoint.
1167                              If insert success, set step to 0.  */
1168                           set_executing (inferior_ptid, 0);
1169                           reinit_frame_cache ();
1170                           if (gdbarch_software_single_step (gdbarch,
1171                                                             get_current_frame ()))
1172                             step = 0;
1173                           set_executing (inferior_ptid, 1);
1174                         }
1175
1176                       if (record_debug)
1177                         fprintf_unfiltered (gdb_stdlog,
1178                                             "Process record: record_full_wait "
1179                                             "issuing one more step in the "
1180                                             "target beneath\n");
1181                       ops->beneath->to_resume (ops->beneath, ptid, step,
1182                                                GDB_SIGNAL_0);
1183                       continue;
1184                     }
1185                 }
1186
1187               /* The inferior is broken by a breakpoint or a signal.  */
1188               break;
1189             }
1190
1191           return ret;
1192         }
1193     }
1194   else
1195     {
1196       struct regcache *regcache = get_current_regcache ();
1197       struct gdbarch *gdbarch = get_regcache_arch (regcache);
1198       struct address_space *aspace = get_regcache_aspace (regcache);
1199       int continue_flag = 1;
1200       int first_record_full_end = 1;
1201       struct cleanup *old_cleanups
1202         = make_cleanup (record_full_wait_cleanups, 0);
1203       CORE_ADDR tmp_pc;
1204
1205       record_full_stop_reason = TARGET_STOPPED_BY_NO_REASON;
1206       status->kind = TARGET_WAITKIND_STOPPED;
1207
1208       /* Check breakpoint when forward execute.  */
1209       if (execution_direction == EXEC_FORWARD)
1210         {
1211           tmp_pc = regcache_read_pc (regcache);
1212           if (record_check_stopped_by_breakpoint (aspace, tmp_pc,
1213                                                   &record_full_stop_reason))
1214             {
1215               if (record_debug)
1216                 fprintf_unfiltered (gdb_stdlog,
1217                                     "Process record: break at %s.\n",
1218                                     paddress (gdbarch, tmp_pc));
1219               goto replay_out;
1220             }
1221         }
1222
1223       /* If GDB is in terminal_inferior mode, it will not get the signal.
1224          And in GDB replay mode, GDB doesn't need to be in terminal_inferior
1225          mode, because inferior will not executed.
1226          Then set it to terminal_ours to make GDB get the signal.  */
1227       target_terminal_ours ();
1228
1229       /* In EXEC_FORWARD mode, record_full_list points to the tail of prev
1230          instruction.  */
1231       if (execution_direction == EXEC_FORWARD && record_full_list->next)
1232         record_full_list = record_full_list->next;
1233
1234       /* Loop over the record_full_list, looking for the next place to
1235          stop.  */
1236       do
1237         {
1238           /* Check for beginning and end of log.  */
1239           if (execution_direction == EXEC_REVERSE
1240               && record_full_list == &record_full_first)
1241             {
1242               /* Hit beginning of record log in reverse.  */
1243               status->kind = TARGET_WAITKIND_NO_HISTORY;
1244               break;
1245             }
1246           if (execution_direction != EXEC_REVERSE && !record_full_list->next)
1247             {
1248               /* Hit end of record log going forward.  */
1249               status->kind = TARGET_WAITKIND_NO_HISTORY;
1250               break;
1251             }
1252
1253           record_full_exec_insn (regcache, gdbarch, record_full_list);
1254
1255           if (record_full_list->type == record_full_end)
1256             {
1257               if (record_debug > 1)
1258                 fprintf_unfiltered (gdb_stdlog,
1259                                     "Process record: record_full_end %s to "
1260                                     "inferior.\n",
1261                                     host_address_to_string (record_full_list));
1262
1263               if (first_record_full_end && execution_direction == EXEC_REVERSE)
1264                 {
1265                   /* When reverse excute, the first record_full_end is the
1266                      part of current instruction.  */
1267                   first_record_full_end = 0;
1268                 }
1269               else
1270                 {
1271                   /* In EXEC_REVERSE mode, this is the record_full_end of prev
1272                      instruction.
1273                      In EXEC_FORWARD mode, this is the record_full_end of
1274                      current instruction.  */
1275                   /* step */
1276                   if (record_full_resume_step)
1277                     {
1278                       if (record_debug > 1)
1279                         fprintf_unfiltered (gdb_stdlog,
1280                                             "Process record: step.\n");
1281                       continue_flag = 0;
1282                     }
1283
1284                   /* check breakpoint */
1285                   tmp_pc = regcache_read_pc (regcache);
1286                   if (record_check_stopped_by_breakpoint (aspace, tmp_pc,
1287                                                           &record_full_stop_reason))
1288                     {
1289                       if (record_debug)
1290                         fprintf_unfiltered (gdb_stdlog,
1291                                             "Process record: break "
1292                                             "at %s.\n",
1293                                             paddress (gdbarch, tmp_pc));
1294
1295                       continue_flag = 0;
1296                     }
1297
1298                   if (record_full_stop_reason == TARGET_STOPPED_BY_WATCHPOINT)
1299                     {
1300                       if (record_debug)
1301                         fprintf_unfiltered (gdb_stdlog,
1302                                             "Process record: hit hw "
1303                                             "watchpoint.\n");
1304                       continue_flag = 0;
1305                     }
1306                   /* Check target signal */
1307                   if (record_full_list->u.end.sigval != GDB_SIGNAL_0)
1308                     /* FIXME: better way to check */
1309                     continue_flag = 0;
1310                 }
1311             }
1312
1313           if (continue_flag)
1314             {
1315               if (execution_direction == EXEC_REVERSE)
1316                 {
1317                   if (record_full_list->prev)
1318                     record_full_list = record_full_list->prev;
1319                 }
1320               else
1321                 {
1322                   if (record_full_list->next)
1323                     record_full_list = record_full_list->next;
1324                 }
1325             }
1326         }
1327       while (continue_flag);
1328
1329 replay_out:
1330       if (record_full_get_sig)
1331         status->value.sig = GDB_SIGNAL_INT;
1332       else if (record_full_list->u.end.sigval != GDB_SIGNAL_0)
1333         /* FIXME: better way to check */
1334         status->value.sig = record_full_list->u.end.sigval;
1335       else
1336         status->value.sig = GDB_SIGNAL_TRAP;
1337
1338       discard_cleanups (old_cleanups);
1339     }
1340
1341   signal (SIGINT, handle_sigint);
1342
1343   do_cleanups (set_cleanups);
1344   return inferior_ptid;
1345 }
1346
1347 static ptid_t
1348 record_full_wait (struct target_ops *ops,
1349                   ptid_t ptid, struct target_waitstatus *status,
1350                   int options)
1351 {
1352   ptid_t return_ptid;
1353
1354   return_ptid = record_full_wait_1 (ops, ptid, status, options);
1355   if (status->kind != TARGET_WAITKIND_IGNORE)
1356     {
1357       /* We're reporting a stop.  Make sure any spurious
1358          target_wait(WNOHANG) doesn't advance the target until the
1359          core wants us resumed again.  */
1360       record_full_resumed = 0;
1361     }
1362   return return_ptid;
1363 }
1364
1365 static int
1366 record_full_stopped_by_watchpoint (struct target_ops *ops)
1367 {
1368   if (RECORD_FULL_IS_REPLAY)
1369     return record_full_stop_reason == TARGET_STOPPED_BY_WATCHPOINT;
1370   else
1371     return ops->beneath->to_stopped_by_watchpoint (ops->beneath);
1372 }
1373
1374 static int
1375 record_full_stopped_data_address (struct target_ops *ops, CORE_ADDR *addr_p)
1376 {
1377   if (RECORD_FULL_IS_REPLAY)
1378     return 0;
1379   else
1380     return ops->beneath->to_stopped_data_address (ops->beneath, addr_p);
1381 }
1382
1383 /* The to_stopped_by_sw_breakpoint method of target record-full.  */
1384
1385 static int
1386 record_full_stopped_by_sw_breakpoint (struct target_ops *ops)
1387 {
1388   return record_full_stop_reason == TARGET_STOPPED_BY_SW_BREAKPOINT;
1389 }
1390
1391 /* The to_supports_stopped_by_sw_breakpoint method of target
1392    record-full.  */
1393
1394 static int
1395 record_full_supports_stopped_by_sw_breakpoint (struct target_ops *ops)
1396 {
1397   return 1;
1398 }
1399
1400 /* The to_stopped_by_hw_breakpoint method of target record-full.  */
1401
1402 static int
1403 record_full_stopped_by_hw_breakpoint (struct target_ops *ops)
1404 {
1405   return record_full_stop_reason == TARGET_STOPPED_BY_HW_BREAKPOINT;
1406 }
1407
1408 /* The to_supports_stopped_by_sw_breakpoint method of target
1409    record-full.  */
1410
1411 static int
1412 record_full_supports_stopped_by_hw_breakpoint (struct target_ops *ops)
1413 {
1414   return 1;
1415 }
1416
1417 /* Record registers change (by user or by GDB) to list as an instruction.  */
1418
1419 static void
1420 record_full_registers_change (struct regcache *regcache, int regnum)
1421 {
1422   /* Check record_full_insn_num.  */
1423   record_full_check_insn_num (0);
1424
1425   record_full_arch_list_head = NULL;
1426   record_full_arch_list_tail = NULL;
1427
1428   if (regnum < 0)
1429     {
1430       int i;
1431
1432       for (i = 0; i < gdbarch_num_regs (get_regcache_arch (regcache)); i++)
1433         {
1434           if (record_full_arch_list_add_reg (regcache, i))
1435             {
1436               record_full_list_release (record_full_arch_list_tail);
1437               error (_("Process record: failed to record execution log."));
1438             }
1439         }
1440     }
1441   else
1442     {
1443       if (record_full_arch_list_add_reg (regcache, regnum))
1444         {
1445           record_full_list_release (record_full_arch_list_tail);
1446           error (_("Process record: failed to record execution log."));
1447         }
1448     }
1449   if (record_full_arch_list_add_end ())
1450     {
1451       record_full_list_release (record_full_arch_list_tail);
1452       error (_("Process record: failed to record execution log."));
1453     }
1454   record_full_list->next = record_full_arch_list_head;
1455   record_full_arch_list_head->prev = record_full_list;
1456   record_full_list = record_full_arch_list_tail;
1457
1458   if (record_full_insn_num == record_full_insn_max_num)
1459     record_full_list_release_first ();
1460   else
1461     record_full_insn_num++;
1462 }
1463
1464 /* "to_store_registers" method for process record target.  */
1465
1466 static void
1467 record_full_store_registers (struct target_ops *ops,
1468                              struct regcache *regcache,
1469                              int regno)
1470 {
1471   if (!record_full_gdb_operation_disable)
1472     {
1473       if (RECORD_FULL_IS_REPLAY)
1474         {
1475           int n;
1476
1477           /* Let user choose if he wants to write register or not.  */
1478           if (regno < 0)
1479             n =
1480               query (_("Because GDB is in replay mode, changing the "
1481                        "value of a register will make the execution "
1482                        "log unusable from this point onward.  "
1483                        "Change all registers?"));
1484           else
1485             n =
1486               query (_("Because GDB is in replay mode, changing the value "
1487                        "of a register will make the execution log unusable "
1488                        "from this point onward.  Change register %s?"),
1489                       gdbarch_register_name (get_regcache_arch (regcache),
1490                                                regno));
1491
1492           if (!n)
1493             {
1494               /* Invalidate the value of regcache that was set in function
1495                  "regcache_raw_write".  */
1496               if (regno < 0)
1497                 {
1498                   int i;
1499
1500                   for (i = 0;
1501                        i < gdbarch_num_regs (get_regcache_arch (regcache));
1502                        i++)
1503                     regcache_invalidate (regcache, i);
1504                 }
1505               else
1506                 regcache_invalidate (regcache, regno);
1507
1508               error (_("Process record canceled the operation."));
1509             }
1510
1511           /* Destroy the record from here forward.  */
1512           record_full_list_release_following (record_full_list);
1513         }
1514
1515       record_full_registers_change (regcache, regno);
1516     }
1517   ops->beneath->to_store_registers (ops->beneath, regcache, regno);
1518 }
1519
1520 /* "to_xfer_partial" method.  Behavior is conditional on
1521    RECORD_FULL_IS_REPLAY.
1522    In replay mode, we cannot write memory unles we are willing to
1523    invalidate the record/replay log from this point forward.  */
1524
1525 static enum target_xfer_status
1526 record_full_xfer_partial (struct target_ops *ops, enum target_object object,
1527                           const char *annex, gdb_byte *readbuf,
1528                           const gdb_byte *writebuf, ULONGEST offset,
1529                           ULONGEST len, ULONGEST *xfered_len)
1530 {
1531   if (!record_full_gdb_operation_disable
1532       && (object == TARGET_OBJECT_MEMORY
1533           || object == TARGET_OBJECT_RAW_MEMORY) && writebuf)
1534     {
1535       if (RECORD_FULL_IS_REPLAY)
1536         {
1537           /* Let user choose if he wants to write memory or not.  */
1538           if (!query (_("Because GDB is in replay mode, writing to memory "
1539                         "will make the execution log unusable from this "
1540                         "point onward.  Write memory at address %s?"),
1541                        paddress (target_gdbarch (), offset)))
1542             error (_("Process record canceled the operation."));
1543
1544           /* Destroy the record from here forward.  */
1545           record_full_list_release_following (record_full_list);
1546         }
1547
1548       /* Check record_full_insn_num */
1549       record_full_check_insn_num (0);
1550
1551       /* Record registers change to list as an instruction.  */
1552       record_full_arch_list_head = NULL;
1553       record_full_arch_list_tail = NULL;
1554       if (record_full_arch_list_add_mem (offset, len))
1555         {
1556           record_full_list_release (record_full_arch_list_tail);
1557           if (record_debug)
1558             fprintf_unfiltered (gdb_stdlog,
1559                                 "Process record: failed to record "
1560                                 "execution log.");
1561           return TARGET_XFER_E_IO;
1562         }
1563       if (record_full_arch_list_add_end ())
1564         {
1565           record_full_list_release (record_full_arch_list_tail);
1566           if (record_debug)
1567             fprintf_unfiltered (gdb_stdlog,
1568                                 "Process record: failed to record "
1569                                 "execution log.");
1570           return TARGET_XFER_E_IO;
1571         }
1572       record_full_list->next = record_full_arch_list_head;
1573       record_full_arch_list_head->prev = record_full_list;
1574       record_full_list = record_full_arch_list_tail;
1575
1576       if (record_full_insn_num == record_full_insn_max_num)
1577         record_full_list_release_first ();
1578       else
1579         record_full_insn_num++;
1580     }
1581
1582   return ops->beneath->to_xfer_partial (ops->beneath, object, annex,
1583                                         readbuf, writebuf, offset,
1584                                         len, xfered_len);
1585 }
1586
1587 /* This structure represents a breakpoint inserted while the record
1588    target is active.  We use this to know when to install/remove
1589    breakpoints in/from the target beneath.  For example, a breakpoint
1590    may be inserted while recording, but removed when not replaying nor
1591    recording.  In that case, the breakpoint had not been inserted on
1592    the target beneath, so we should not try to remove it there.  */
1593
1594 struct record_full_breakpoint
1595 {
1596   /* The address and address space the breakpoint was set at.  */
1597   struct address_space *address_space;
1598   CORE_ADDR addr;
1599
1600   /* True when the breakpoint has been also installed in the target
1601      beneath.  This will be false for breakpoints set during replay or
1602      when recording.  */
1603   int in_target_beneath;
1604 };
1605
1606 typedef struct record_full_breakpoint *record_full_breakpoint_p;
1607 DEF_VEC_P(record_full_breakpoint_p);
1608
1609 /* The list of breakpoints inserted while the record target is
1610    active.  */
1611 VEC(record_full_breakpoint_p) *record_full_breakpoints = NULL;
1612
1613 static void
1614 record_full_sync_record_breakpoints (struct bp_location *loc, void *data)
1615 {
1616   if (loc->loc_type != bp_loc_software_breakpoint)
1617       return;
1618
1619   if (loc->inserted)
1620     {
1621       struct record_full_breakpoint *bp = XNEW (struct record_full_breakpoint);
1622
1623       bp->addr = loc->target_info.placed_address;
1624       bp->address_space = loc->target_info.placed_address_space;
1625
1626       bp->in_target_beneath = 1;
1627
1628       VEC_safe_push (record_full_breakpoint_p, record_full_breakpoints, bp);
1629     }
1630 }
1631
1632 /* Sync existing breakpoints to record_full_breakpoints.  */
1633
1634 static void
1635 record_full_init_record_breakpoints (void)
1636 {
1637   VEC_free (record_full_breakpoint_p, record_full_breakpoints);
1638
1639   iterate_over_bp_locations (record_full_sync_record_breakpoints);
1640 }
1641
1642 /* Behavior is conditional on RECORD_FULL_IS_REPLAY.  We will not actually
1643    insert or remove breakpoints in the real target when replaying, nor
1644    when recording.  */
1645
1646 static int
1647 record_full_insert_breakpoint (struct target_ops *ops,
1648                                struct gdbarch *gdbarch,
1649                                struct bp_target_info *bp_tgt)
1650 {
1651   struct record_full_breakpoint *bp;
1652   int in_target_beneath = 0;
1653
1654   if (!RECORD_FULL_IS_REPLAY)
1655     {
1656       /* When recording, we currently always single-step, so we don't
1657          really need to install regular breakpoints in the inferior.
1658          However, we do have to insert software single-step
1659          breakpoints, in case the target can't hardware step.  To keep
1660          things single, we always insert.  */
1661       struct cleanup *old_cleanups;
1662       int ret;
1663
1664       old_cleanups = record_full_gdb_operation_disable_set ();
1665       ret = ops->beneath->to_insert_breakpoint (ops->beneath, gdbarch, bp_tgt);
1666       do_cleanups (old_cleanups);
1667
1668       if (ret != 0)
1669         return ret;
1670
1671       in_target_beneath = 1;
1672     }
1673
1674   bp = XNEW (struct record_full_breakpoint);
1675   bp->addr = bp_tgt->placed_address;
1676   bp->address_space = bp_tgt->placed_address_space;
1677   bp->in_target_beneath = in_target_beneath;
1678   VEC_safe_push (record_full_breakpoint_p, record_full_breakpoints, bp);
1679   return 0;
1680 }
1681
1682 /* "to_remove_breakpoint" method for process record target.  */
1683
1684 static int
1685 record_full_remove_breakpoint (struct target_ops *ops,
1686                                struct gdbarch *gdbarch,
1687                                struct bp_target_info *bp_tgt)
1688 {
1689   struct record_full_breakpoint *bp;
1690   int ix;
1691
1692   for (ix = 0;
1693        VEC_iterate (record_full_breakpoint_p,
1694                     record_full_breakpoints, ix, bp);
1695        ++ix)
1696     {
1697       if (bp->addr == bp_tgt->placed_address
1698           && bp->address_space == bp_tgt->placed_address_space)
1699         {
1700           if (bp->in_target_beneath)
1701             {
1702               struct cleanup *old_cleanups;
1703               int ret;
1704
1705               old_cleanups = record_full_gdb_operation_disable_set ();
1706               ret = ops->beneath->to_remove_breakpoint (ops->beneath, gdbarch,
1707                                                         bp_tgt);
1708               do_cleanups (old_cleanups);
1709
1710               if (ret != 0)
1711                 return ret;
1712             }
1713
1714           VEC_unordered_remove (record_full_breakpoint_p,
1715                                 record_full_breakpoints, ix);
1716           return 0;
1717         }
1718     }
1719
1720   gdb_assert_not_reached ("removing unknown breakpoint");
1721 }
1722
1723 /* "to_can_execute_reverse" method for process record target.  */
1724
1725 static int
1726 record_full_can_execute_reverse (struct target_ops *self)
1727 {
1728   return 1;
1729 }
1730
1731 /* "to_get_bookmark" method for process record and prec over core.  */
1732
1733 static gdb_byte *
1734 record_full_get_bookmark (struct target_ops *self, const char *args,
1735                           int from_tty)
1736 {
1737   char *ret = NULL;
1738
1739   /* Return stringified form of instruction count.  */
1740   if (record_full_list && record_full_list->type == record_full_end)
1741     ret = xstrdup (pulongest (record_full_list->u.end.insn_num));
1742
1743   if (record_debug)
1744     {
1745       if (ret)
1746         fprintf_unfiltered (gdb_stdlog,
1747                             "record_full_get_bookmark returns %s\n", ret);
1748       else
1749         fprintf_unfiltered (gdb_stdlog,
1750                             "record_full_get_bookmark returns NULL\n");
1751     }
1752   return (gdb_byte *) ret;
1753 }
1754
1755 /* "to_goto_bookmark" method for process record and prec over core.  */
1756
1757 static void
1758 record_full_goto_bookmark (struct target_ops *self,
1759                            const gdb_byte *raw_bookmark, int from_tty)
1760 {
1761   const char *bookmark = (const char *) raw_bookmark;
1762   struct cleanup *cleanup = make_cleanup (null_cleanup, NULL);
1763
1764   if (record_debug)
1765     fprintf_unfiltered (gdb_stdlog,
1766                         "record_full_goto_bookmark receives %s\n", bookmark);
1767
1768   if (bookmark[0] == '\'' || bookmark[0] == '\"')
1769     {
1770       char *copy;
1771
1772       if (bookmark[strlen (bookmark) - 1] != bookmark[0])
1773         error (_("Unbalanced quotes: %s"), bookmark);
1774
1775
1776       copy = savestring (bookmark + 1, strlen (bookmark) - 2);
1777       make_cleanup (xfree, copy);
1778       bookmark = copy;
1779     }
1780
1781   record_goto (bookmark);
1782
1783   do_cleanups (cleanup);
1784 }
1785
1786 static enum exec_direction_kind
1787 record_full_execution_direction (struct target_ops *self)
1788 {
1789   return record_full_execution_dir;
1790 }
1791
1792 static void
1793 record_full_info (struct target_ops *self)
1794 {
1795   struct record_full_entry *p;
1796
1797   if (RECORD_FULL_IS_REPLAY)
1798     printf_filtered (_("Replay mode:\n"));
1799   else
1800     printf_filtered (_("Record mode:\n"));
1801
1802   /* Find entry for first actual instruction in the log.  */
1803   for (p = record_full_first.next;
1804        p != NULL && p->type != record_full_end;
1805        p = p->next)
1806     ;
1807
1808   /* Do we have a log at all?  */
1809   if (p != NULL && p->type == record_full_end)
1810     {
1811       /* Display instruction number for first instruction in the log.  */
1812       printf_filtered (_("Lowest recorded instruction number is %s.\n"),
1813                        pulongest (p->u.end.insn_num));
1814
1815       /* If in replay mode, display where we are in the log.  */
1816       if (RECORD_FULL_IS_REPLAY)
1817         printf_filtered (_("Current instruction number is %s.\n"),
1818                          pulongest (record_full_list->u.end.insn_num));
1819
1820       /* Display instruction number for last instruction in the log.  */
1821       printf_filtered (_("Highest recorded instruction number is %s.\n"),
1822                        pulongest (record_full_insn_count));
1823
1824       /* Display log count.  */
1825       printf_filtered (_("Log contains %u instructions.\n"),
1826                        record_full_insn_num);
1827     }
1828   else
1829     printf_filtered (_("No instructions have been logged.\n"));
1830
1831   /* Display max log size.  */
1832   printf_filtered (_("Max logged instructions is %u.\n"),
1833                    record_full_insn_max_num);
1834 }
1835
1836 /* The "to_record_delete" target method.  */
1837
1838 static void
1839 record_full_delete (struct target_ops *self)
1840 {
1841   record_full_list_release_following (record_full_list);
1842 }
1843
1844 /* The "to_record_is_replaying" target method.  */
1845
1846 static int
1847 record_full_is_replaying (struct target_ops *self, ptid_t ptid)
1848 {
1849   return RECORD_FULL_IS_REPLAY;
1850 }
1851
1852 /* The "to_record_will_replay" target method.  */
1853
1854 static int
1855 record_full_will_replay (struct target_ops *self, ptid_t ptid, int dir)
1856 {
1857   /* We can currently only record when executing forwards.  Should we be able
1858      to record when executing backwards on targets that support reverse
1859      execution, this needs to be changed.  */
1860
1861   return RECORD_FULL_IS_REPLAY || dir == EXEC_REVERSE;
1862 }
1863
1864 /* Go to a specific entry.  */
1865
1866 static void
1867 record_full_goto_entry (struct record_full_entry *p)
1868 {
1869   if (p == NULL)
1870     error (_("Target insn not found."));
1871   else if (p == record_full_list)
1872     error (_("Already at target insn."));
1873   else if (p->u.end.insn_num > record_full_list->u.end.insn_num)
1874     {
1875       printf_filtered (_("Go forward to insn number %s\n"),
1876                        pulongest (p->u.end.insn_num));
1877       record_full_goto_insn (p, EXEC_FORWARD);
1878     }
1879   else
1880     {
1881       printf_filtered (_("Go backward to insn number %s\n"),
1882                        pulongest (p->u.end.insn_num));
1883       record_full_goto_insn (p, EXEC_REVERSE);
1884     }
1885
1886   registers_changed ();
1887   reinit_frame_cache ();
1888   stop_pc = regcache_read_pc (get_current_regcache ());
1889   print_stack_frame (get_selected_frame (NULL), 1, SRC_AND_LOC, 1);
1890 }
1891
1892 /* The "to_goto_record_begin" target method.  */
1893
1894 static void
1895 record_full_goto_begin (struct target_ops *self)
1896 {
1897   struct record_full_entry *p = NULL;
1898
1899   for (p = &record_full_first; p != NULL; p = p->next)
1900     if (p->type == record_full_end)
1901       break;
1902
1903   record_full_goto_entry (p);
1904 }
1905
1906 /* The "to_goto_record_end" target method.  */
1907
1908 static void
1909 record_full_goto_end (struct target_ops *self)
1910 {
1911   struct record_full_entry *p = NULL;
1912
1913   for (p = record_full_list; p->next != NULL; p = p->next)
1914     ;
1915   for (; p!= NULL; p = p->prev)
1916     if (p->type == record_full_end)
1917       break;
1918
1919   record_full_goto_entry (p);
1920 }
1921
1922 /* The "to_goto_record" target method.  */
1923
1924 static void
1925 record_full_goto (struct target_ops *self, ULONGEST target_insn)
1926 {
1927   struct record_full_entry *p = NULL;
1928
1929   for (p = &record_full_first; p != NULL; p = p->next)
1930     if (p->type == record_full_end && p->u.end.insn_num == target_insn)
1931       break;
1932
1933   record_full_goto_entry (p);
1934 }
1935
1936 /* The "to_record_stop_replaying" target method.  */
1937
1938 static void
1939 record_full_stop_replaying (struct target_ops *self)
1940 {
1941   record_full_goto_end (self);
1942 }
1943
1944 static void
1945 init_record_full_ops (void)
1946 {
1947   record_full_ops.to_shortname = "record-full";
1948   record_full_ops.to_longname = "Process record and replay target";
1949   record_full_ops.to_doc =
1950     "Log program while executing and replay execution from log.";
1951   record_full_ops.to_open = record_full_open;
1952   record_full_ops.to_close = record_full_close;
1953   record_full_ops.to_async = record_full_async;
1954   record_full_ops.to_resume = record_full_resume;
1955   record_full_ops.to_wait = record_full_wait;
1956   record_full_ops.to_disconnect = record_disconnect;
1957   record_full_ops.to_detach = record_detach;
1958   record_full_ops.to_mourn_inferior = record_mourn_inferior;
1959   record_full_ops.to_kill = record_kill;
1960   record_full_ops.to_store_registers = record_full_store_registers;
1961   record_full_ops.to_xfer_partial = record_full_xfer_partial;
1962   record_full_ops.to_insert_breakpoint = record_full_insert_breakpoint;
1963   record_full_ops.to_remove_breakpoint = record_full_remove_breakpoint;
1964   record_full_ops.to_stopped_by_watchpoint = record_full_stopped_by_watchpoint;
1965   record_full_ops.to_stopped_data_address = record_full_stopped_data_address;
1966   record_full_ops.to_stopped_by_sw_breakpoint
1967     = record_full_stopped_by_sw_breakpoint;
1968   record_full_ops.to_supports_stopped_by_sw_breakpoint
1969     = record_full_supports_stopped_by_sw_breakpoint;
1970   record_full_ops.to_stopped_by_hw_breakpoint
1971     = record_full_stopped_by_hw_breakpoint;
1972   record_full_ops.to_supports_stopped_by_hw_breakpoint
1973     = record_full_supports_stopped_by_hw_breakpoint;
1974   record_full_ops.to_can_execute_reverse = record_full_can_execute_reverse;
1975   record_full_ops.to_stratum = record_stratum;
1976   /* Add bookmark target methods.  */
1977   record_full_ops.to_get_bookmark = record_full_get_bookmark;
1978   record_full_ops.to_goto_bookmark = record_full_goto_bookmark;
1979   record_full_ops.to_execution_direction = record_full_execution_direction;
1980   record_full_ops.to_info_record = record_full_info;
1981   record_full_ops.to_save_record = record_full_save;
1982   record_full_ops.to_delete_record = record_full_delete;
1983   record_full_ops.to_record_is_replaying = record_full_is_replaying;
1984   record_full_ops.to_record_will_replay = record_full_will_replay;
1985   record_full_ops.to_record_stop_replaying = record_full_stop_replaying;
1986   record_full_ops.to_goto_record_begin = record_full_goto_begin;
1987   record_full_ops.to_goto_record_end = record_full_goto_end;
1988   record_full_ops.to_goto_record = record_full_goto;
1989   record_full_ops.to_magic = OPS_MAGIC;
1990 }
1991
1992 /* "to_resume" method for prec over corefile.  */
1993
1994 static void
1995 record_full_core_resume (struct target_ops *ops, ptid_t ptid, int step,
1996                          enum gdb_signal signal)
1997 {
1998   record_full_resume_step = step;
1999   record_full_resumed = 1;
2000   record_full_execution_dir = execution_direction;
2001
2002   /* We are about to start executing the inferior (or simulate it),
2003      let's register it with the event loop.  */
2004   if (target_can_async_p ())
2005     target_async (1);
2006 }
2007
2008 /* "to_kill" method for prec over corefile.  */
2009
2010 static void
2011 record_full_core_kill (struct target_ops *ops)
2012 {
2013   if (record_debug)
2014     fprintf_unfiltered (gdb_stdlog, "Process record: record_full_core_kill\n");
2015
2016   unpush_target (&record_full_core_ops);
2017 }
2018
2019 /* "to_fetch_registers" method for prec over corefile.  */
2020
2021 static void
2022 record_full_core_fetch_registers (struct target_ops *ops,
2023                                   struct regcache *regcache,
2024                                   int regno)
2025 {
2026   if (regno < 0)
2027     {
2028       int num = gdbarch_num_regs (get_regcache_arch (regcache));
2029       int i;
2030
2031       for (i = 0; i < num; i ++)
2032         regcache_raw_supply (regcache, i,
2033                              record_full_core_regbuf + MAX_REGISTER_SIZE * i);
2034     }
2035   else
2036     regcache_raw_supply (regcache, regno,
2037                          record_full_core_regbuf + MAX_REGISTER_SIZE * regno);
2038 }
2039
2040 /* "to_prepare_to_store" method for prec over corefile.  */
2041
2042 static void
2043 record_full_core_prepare_to_store (struct target_ops *self,
2044                                    struct regcache *regcache)
2045 {
2046 }
2047
2048 /* "to_store_registers" method for prec over corefile.  */
2049
2050 static void
2051 record_full_core_store_registers (struct target_ops *ops,
2052                              struct regcache *regcache,
2053                              int regno)
2054 {
2055   if (record_full_gdb_operation_disable)
2056     regcache_raw_collect (regcache, regno,
2057                           record_full_core_regbuf + MAX_REGISTER_SIZE * regno);
2058   else
2059     error (_("You can't do that without a process to debug."));
2060 }
2061
2062 /* "to_xfer_partial" method for prec over corefile.  */
2063
2064 static enum target_xfer_status
2065 record_full_core_xfer_partial (struct target_ops *ops,
2066                                enum target_object object,
2067                                const char *annex, gdb_byte *readbuf,
2068                                const gdb_byte *writebuf, ULONGEST offset,
2069                                ULONGEST len, ULONGEST *xfered_len)
2070 {
2071   if (object == TARGET_OBJECT_MEMORY)
2072     {
2073       if (record_full_gdb_operation_disable || !writebuf)
2074         {
2075           struct target_section *p;
2076
2077           for (p = record_full_core_start; p < record_full_core_end; p++)
2078             {
2079               if (offset >= p->addr)
2080                 {
2081                   struct record_full_core_buf_entry *entry;
2082                   ULONGEST sec_offset;
2083
2084                   if (offset >= p->endaddr)
2085                     continue;
2086
2087                   if (offset + len > p->endaddr)
2088                     len = p->endaddr - offset;
2089
2090                   sec_offset = offset - p->addr;
2091
2092                   /* Read readbuf or write writebuf p, offset, len.  */
2093                   /* Check flags.  */
2094                   if (p->the_bfd_section->flags & SEC_CONSTRUCTOR
2095                       || (p->the_bfd_section->flags & SEC_HAS_CONTENTS) == 0)
2096                     {
2097                       if (readbuf)
2098                         memset (readbuf, 0, len);
2099
2100                       *xfered_len = len;
2101                       return TARGET_XFER_OK;
2102                     }
2103                   /* Get record_full_core_buf_entry.  */
2104                   for (entry = record_full_core_buf_list; entry;
2105                        entry = entry->prev)
2106                     if (entry->p == p)
2107                       break;
2108                   if (writebuf)
2109                     {
2110                       if (!entry)
2111                         {
2112                           /* Add a new entry.  */
2113                           entry = XNEW (struct record_full_core_buf_entry);
2114                           entry->p = p;
2115                           if (!bfd_malloc_and_get_section
2116                                 (p->the_bfd_section->owner,
2117                                  p->the_bfd_section,
2118                                  &entry->buf))
2119                             {
2120                               xfree (entry);
2121                               return TARGET_XFER_EOF;
2122                             }
2123                           entry->prev = record_full_core_buf_list;
2124                           record_full_core_buf_list = entry;
2125                         }
2126
2127                       memcpy (entry->buf + sec_offset, writebuf,
2128                               (size_t) len);
2129                     }
2130                   else
2131                     {
2132                       if (!entry)
2133                         return ops->beneath->to_xfer_partial (ops->beneath,
2134                                                               object, annex,
2135                                                               readbuf, writebuf,
2136                                                               offset, len,
2137                                                               xfered_len);
2138
2139                       memcpy (readbuf, entry->buf + sec_offset,
2140                               (size_t) len);
2141                     }
2142
2143                   *xfered_len = len;
2144                   return TARGET_XFER_OK;
2145                 }
2146             }
2147
2148           return TARGET_XFER_E_IO;
2149         }
2150       else
2151         error (_("You can't do that without a process to debug."));
2152     }
2153
2154   return ops->beneath->to_xfer_partial (ops->beneath, object, annex,
2155                                         readbuf, writebuf, offset, len,
2156                                         xfered_len);
2157 }
2158
2159 /* "to_insert_breakpoint" method for prec over corefile.  */
2160
2161 static int
2162 record_full_core_insert_breakpoint (struct target_ops *ops,
2163                                     struct gdbarch *gdbarch,
2164                                     struct bp_target_info *bp_tgt)
2165 {
2166   return 0;
2167 }
2168
2169 /* "to_remove_breakpoint" method for prec over corefile.  */
2170
2171 static int
2172 record_full_core_remove_breakpoint (struct target_ops *ops,
2173                                     struct gdbarch *gdbarch,
2174                                     struct bp_target_info *bp_tgt)
2175 {
2176   return 0;
2177 }
2178
2179 /* "to_has_execution" method for prec over corefile.  */
2180
2181 static int
2182 record_full_core_has_execution (struct target_ops *ops, ptid_t the_ptid)
2183 {
2184   return 1;
2185 }
2186
2187 static void
2188 init_record_full_core_ops (void)
2189 {
2190   record_full_core_ops.to_shortname = "record-core";
2191   record_full_core_ops.to_longname = "Process record and replay target";
2192   record_full_core_ops.to_doc =
2193     "Log program while executing and replay execution from log.";
2194   record_full_core_ops.to_open = record_full_open;
2195   record_full_core_ops.to_close = record_full_close;
2196   record_full_core_ops.to_async = record_full_async;
2197   record_full_core_ops.to_resume = record_full_core_resume;
2198   record_full_core_ops.to_wait = record_full_wait;
2199   record_full_core_ops.to_kill = record_full_core_kill;
2200   record_full_core_ops.to_fetch_registers = record_full_core_fetch_registers;
2201   record_full_core_ops.to_prepare_to_store = record_full_core_prepare_to_store;
2202   record_full_core_ops.to_store_registers = record_full_core_store_registers;
2203   record_full_core_ops.to_xfer_partial = record_full_core_xfer_partial;
2204   record_full_core_ops.to_insert_breakpoint
2205     = record_full_core_insert_breakpoint;
2206   record_full_core_ops.to_remove_breakpoint
2207     = record_full_core_remove_breakpoint;
2208   record_full_core_ops.to_stopped_by_watchpoint
2209     = record_full_stopped_by_watchpoint;
2210   record_full_core_ops.to_stopped_data_address
2211     = record_full_stopped_data_address;
2212   record_full_core_ops.to_stopped_by_sw_breakpoint
2213     = record_full_stopped_by_sw_breakpoint;
2214   record_full_core_ops.to_supports_stopped_by_sw_breakpoint
2215     = record_full_supports_stopped_by_sw_breakpoint;
2216   record_full_core_ops.to_stopped_by_hw_breakpoint
2217     = record_full_stopped_by_hw_breakpoint;
2218   record_full_core_ops.to_supports_stopped_by_hw_breakpoint
2219     = record_full_supports_stopped_by_hw_breakpoint;
2220   record_full_core_ops.to_can_execute_reverse
2221     = record_full_can_execute_reverse;
2222   record_full_core_ops.to_has_execution = record_full_core_has_execution;
2223   record_full_core_ops.to_stratum = record_stratum;
2224   /* Add bookmark target methods.  */
2225   record_full_core_ops.to_get_bookmark = record_full_get_bookmark;
2226   record_full_core_ops.to_goto_bookmark = record_full_goto_bookmark;
2227   record_full_core_ops.to_execution_direction
2228     = record_full_execution_direction;
2229   record_full_core_ops.to_info_record = record_full_info;
2230   record_full_core_ops.to_delete_record = record_full_delete;
2231   record_full_core_ops.to_record_is_replaying = record_full_is_replaying;
2232   record_full_core_ops.to_record_will_replay = record_full_will_replay;
2233   record_full_core_ops.to_goto_record_begin = record_full_goto_begin;
2234   record_full_core_ops.to_goto_record_end = record_full_goto_end;
2235   record_full_core_ops.to_goto_record = record_full_goto;
2236   record_full_core_ops.to_magic = OPS_MAGIC;
2237 }
2238
2239 /* Record log save-file format
2240    Version 1 (never released)
2241
2242    Header:
2243      4 bytes: magic number htonl(0x20090829).
2244        NOTE: be sure to change whenever this file format changes!
2245
2246    Records:
2247      record_full_end:
2248        1 byte:  record type (record_full_end, see enum record_full_type).
2249      record_full_reg:
2250        1 byte:  record type (record_full_reg, see enum record_full_type).
2251        8 bytes: register id (network byte order).
2252        MAX_REGISTER_SIZE bytes: register value.
2253      record_full_mem:
2254        1 byte:  record type (record_full_mem, see enum record_full_type).
2255        8 bytes: memory length (network byte order).
2256        8 bytes: memory address (network byte order).
2257        n bytes: memory value (n == memory length).
2258
2259    Version 2
2260      4 bytes: magic number netorder32(0x20091016).
2261        NOTE: be sure to change whenever this file format changes!
2262
2263    Records:
2264      record_full_end:
2265        1 byte:  record type (record_full_end, see enum record_full_type).
2266        4 bytes: signal
2267        4 bytes: instruction count
2268      record_full_reg:
2269        1 byte:  record type (record_full_reg, see enum record_full_type).
2270        4 bytes: register id (network byte order).
2271        n bytes: register value (n == actual register size).
2272                 (eg. 4 bytes for x86 general registers).
2273      record_full_mem:
2274        1 byte:  record type (record_full_mem, see enum record_full_type).
2275        4 bytes: memory length (network byte order).
2276        8 bytes: memory address (network byte order).
2277        n bytes: memory value (n == memory length).
2278
2279 */
2280
2281 /* bfdcore_read -- read bytes from a core file section.  */
2282
2283 static inline void
2284 bfdcore_read (bfd *obfd, asection *osec, void *buf, int len, int *offset)
2285 {
2286   int ret = bfd_get_section_contents (obfd, osec, buf, *offset, len);
2287
2288   if (ret)
2289     *offset += len;
2290   else
2291     error (_("Failed to read %d bytes from core file %s ('%s')."),
2292            len, bfd_get_filename (obfd),
2293            bfd_errmsg (bfd_get_error ()));
2294 }
2295
2296 static inline uint64_t
2297 netorder64 (uint64_t input)
2298 {
2299   uint64_t ret;
2300
2301   store_unsigned_integer ((gdb_byte *) &ret, sizeof (ret), 
2302                           BFD_ENDIAN_BIG, input);
2303   return ret;
2304 }
2305
2306 static inline uint32_t
2307 netorder32 (uint32_t input)
2308 {
2309   uint32_t ret;
2310
2311   store_unsigned_integer ((gdb_byte *) &ret, sizeof (ret), 
2312                           BFD_ENDIAN_BIG, input);
2313   return ret;
2314 }
2315
2316 static inline uint16_t
2317 netorder16 (uint16_t input)
2318 {
2319   uint16_t ret;
2320
2321   store_unsigned_integer ((gdb_byte *) &ret, sizeof (ret), 
2322                           BFD_ENDIAN_BIG, input);
2323   return ret;
2324 }
2325
2326 /* Restore the execution log from a core_bfd file.  */
2327 static void
2328 record_full_restore (void)
2329 {
2330   uint32_t magic;
2331   struct cleanup *old_cleanups;
2332   struct record_full_entry *rec;
2333   asection *osec;
2334   uint32_t osec_size;
2335   int bfd_offset = 0;
2336   struct regcache *regcache;
2337
2338   /* We restore the execution log from the open core bfd,
2339      if there is one.  */
2340   if (core_bfd == NULL)
2341     return;
2342
2343   /* "record_full_restore" can only be called when record list is empty.  */
2344   gdb_assert (record_full_first.next == NULL);
2345  
2346   if (record_debug)
2347     fprintf_unfiltered (gdb_stdlog, "Restoring recording from core file.\n");
2348
2349   /* Now need to find our special note section.  */
2350   osec = bfd_get_section_by_name (core_bfd, "null0");
2351   if (record_debug)
2352     fprintf_unfiltered (gdb_stdlog, "Find precord section %s.\n",
2353                         osec ? "succeeded" : "failed");
2354   if (osec == NULL)
2355     return;
2356   osec_size = bfd_section_size (core_bfd, osec);
2357   if (record_debug)
2358     fprintf_unfiltered (gdb_stdlog, "%s", bfd_section_name (core_bfd, osec));
2359
2360   /* Check the magic code.  */
2361   bfdcore_read (core_bfd, osec, &magic, sizeof (magic), &bfd_offset);
2362   if (magic != RECORD_FULL_FILE_MAGIC)
2363     error (_("Version mis-match or file format error in core file %s."),
2364            bfd_get_filename (core_bfd));
2365   if (record_debug)
2366     fprintf_unfiltered (gdb_stdlog,
2367                         "  Reading 4-byte magic cookie "
2368                         "RECORD_FULL_FILE_MAGIC (0x%s)\n",
2369                         phex_nz (netorder32 (magic), 4));
2370
2371   /* Restore the entries in recfd into record_full_arch_list_head and
2372      record_full_arch_list_tail.  */
2373   record_full_arch_list_head = NULL;
2374   record_full_arch_list_tail = NULL;
2375   record_full_insn_num = 0;
2376   old_cleanups = make_cleanup (record_full_arch_list_cleanups, 0);
2377   regcache = get_current_regcache ();
2378
2379   while (1)
2380     {
2381       uint8_t rectype;
2382       uint32_t regnum, len, signal, count;
2383       uint64_t addr;
2384
2385       /* We are finished when offset reaches osec_size.  */
2386       if (bfd_offset >= osec_size)
2387         break;
2388       bfdcore_read (core_bfd, osec, &rectype, sizeof (rectype), &bfd_offset);
2389
2390       switch (rectype)
2391         {
2392         case record_full_reg: /* reg */
2393           /* Get register number to regnum.  */
2394           bfdcore_read (core_bfd, osec, &regnum,
2395                         sizeof (regnum), &bfd_offset);
2396           regnum = netorder32 (regnum);
2397
2398           rec = record_full_reg_alloc (regcache, regnum);
2399
2400           /* Get val.  */
2401           bfdcore_read (core_bfd, osec, record_full_get_loc (rec),
2402                         rec->u.reg.len, &bfd_offset);
2403
2404           if (record_debug)
2405             fprintf_unfiltered (gdb_stdlog,
2406                                 "  Reading register %d (1 "
2407                                 "plus %lu plus %d bytes)\n",
2408                                 rec->u.reg.num,
2409                                 (unsigned long) sizeof (regnum),
2410                                 rec->u.reg.len);
2411           break;
2412
2413         case record_full_mem: /* mem */
2414           /* Get len.  */
2415           bfdcore_read (core_bfd, osec, &len, 
2416                         sizeof (len), &bfd_offset);
2417           len = netorder32 (len);
2418
2419           /* Get addr.  */
2420           bfdcore_read (core_bfd, osec, &addr,
2421                         sizeof (addr), &bfd_offset);
2422           addr = netorder64 (addr);
2423
2424           rec = record_full_mem_alloc (addr, len);
2425
2426           /* Get val.  */
2427           bfdcore_read (core_bfd, osec, record_full_get_loc (rec),
2428                         rec->u.mem.len, &bfd_offset);
2429
2430           if (record_debug)
2431             fprintf_unfiltered (gdb_stdlog,
2432                                 "  Reading memory %s (1 plus "
2433                                 "%lu plus %lu plus %d bytes)\n",
2434                                 paddress (get_current_arch (),
2435                                           rec->u.mem.addr),
2436                                 (unsigned long) sizeof (addr),
2437                                 (unsigned long) sizeof (len),
2438                                 rec->u.mem.len);
2439           break;
2440
2441         case record_full_end: /* end */
2442           rec = record_full_end_alloc ();
2443           record_full_insn_num ++;
2444
2445           /* Get signal value.  */
2446           bfdcore_read (core_bfd, osec, &signal, 
2447                         sizeof (signal), &bfd_offset);
2448           signal = netorder32 (signal);
2449           rec->u.end.sigval = (enum gdb_signal) signal;
2450
2451           /* Get insn count.  */
2452           bfdcore_read (core_bfd, osec, &count, 
2453                         sizeof (count), &bfd_offset);
2454           count = netorder32 (count);
2455           rec->u.end.insn_num = count;
2456           record_full_insn_count = count + 1;
2457           if (record_debug)
2458             fprintf_unfiltered (gdb_stdlog,
2459                                 "  Reading record_full_end (1 + "
2460                                 "%lu + %lu bytes), offset == %s\n",
2461                                 (unsigned long) sizeof (signal),
2462                                 (unsigned long) sizeof (count),
2463                                 paddress (get_current_arch (),
2464                                           bfd_offset));
2465           break;
2466
2467         default:
2468           error (_("Bad entry type in core file %s."),
2469                  bfd_get_filename (core_bfd));
2470           break;
2471         }
2472
2473       /* Add rec to record arch list.  */
2474       record_full_arch_list_add (rec);
2475     }
2476
2477   discard_cleanups (old_cleanups);
2478
2479   /* Add record_full_arch_list_head to the end of record list.  */
2480   record_full_first.next = record_full_arch_list_head;
2481   record_full_arch_list_head->prev = &record_full_first;
2482   record_full_arch_list_tail->next = NULL;
2483   record_full_list = &record_full_first;
2484
2485   /* Update record_full_insn_max_num.  */
2486   if (record_full_insn_num > record_full_insn_max_num)
2487     {
2488       record_full_insn_max_num = record_full_insn_num;
2489       warning (_("Auto increase record/replay buffer limit to %u."),
2490                record_full_insn_max_num);
2491     }
2492
2493   /* Succeeded.  */
2494   printf_filtered (_("Restored records from core file %s.\n"),
2495                    bfd_get_filename (core_bfd));
2496
2497   print_stack_frame (get_selected_frame (NULL), 1, SRC_AND_LOC, 1);
2498 }
2499
2500 /* bfdcore_write -- write bytes into a core file section.  */
2501
2502 static inline void
2503 bfdcore_write (bfd *obfd, asection *osec, void *buf, int len, int *offset)
2504 {
2505   int ret = bfd_set_section_contents (obfd, osec, buf, *offset, len);
2506
2507   if (ret)
2508     *offset += len;
2509   else
2510     error (_("Failed to write %d bytes to core file %s ('%s')."),
2511            len, bfd_get_filename (obfd),
2512            bfd_errmsg (bfd_get_error ()));
2513 }
2514
2515 /* Restore the execution log from a file.  We use a modified elf
2516    corefile format, with an extra section for our data.  */
2517
2518 static void
2519 cmd_record_full_restore (char *args, int from_tty)
2520 {
2521   core_file_command (args, from_tty);
2522   record_full_open (args, from_tty);
2523 }
2524
2525 static void
2526 record_full_save_cleanups (void *data)
2527 {
2528   bfd *obfd = (bfd *) data;
2529   char *pathname = xstrdup (bfd_get_filename (obfd));
2530
2531   gdb_bfd_unref (obfd);
2532   unlink (pathname);
2533   xfree (pathname);
2534 }
2535
2536 /* Save the execution log to a file.  We use a modified elf corefile
2537    format, with an extra section for our data.  */
2538
2539 static void
2540 record_full_save (struct target_ops *self, const char *recfilename)
2541 {
2542   struct record_full_entry *cur_record_full_list;
2543   uint32_t magic;
2544   struct regcache *regcache;
2545   struct gdbarch *gdbarch;
2546   struct cleanup *old_cleanups;
2547   struct cleanup *set_cleanups;
2548   bfd *obfd;
2549   int save_size = 0;
2550   asection *osec = NULL;
2551   int bfd_offset = 0;
2552
2553   /* Open the save file.  */
2554   if (record_debug)
2555     fprintf_unfiltered (gdb_stdlog, "Saving execution log to core file '%s'\n",
2556                         recfilename);
2557
2558   /* Open the output file.  */
2559   obfd = create_gcore_bfd (recfilename);
2560   old_cleanups = make_cleanup (record_full_save_cleanups, obfd);
2561
2562   /* Save the current record entry to "cur_record_full_list".  */
2563   cur_record_full_list = record_full_list;
2564
2565   /* Get the values of regcache and gdbarch.  */
2566   regcache = get_current_regcache ();
2567   gdbarch = get_regcache_arch (regcache);
2568
2569   /* Disable the GDB operation record.  */
2570   set_cleanups = record_full_gdb_operation_disable_set ();
2571
2572   /* Reverse execute to the begin of record list.  */
2573   while (1)
2574     {
2575       /* Check for beginning and end of log.  */
2576       if (record_full_list == &record_full_first)
2577         break;
2578
2579       record_full_exec_insn (regcache, gdbarch, record_full_list);
2580
2581       if (record_full_list->prev)
2582         record_full_list = record_full_list->prev;
2583     }
2584
2585   /* Compute the size needed for the extra bfd section.  */
2586   save_size = 4;        /* magic cookie */
2587   for (record_full_list = record_full_first.next; record_full_list;
2588        record_full_list = record_full_list->next)
2589     switch (record_full_list->type)
2590       {
2591       case record_full_end:
2592         save_size += 1 + 4 + 4;
2593         break;
2594       case record_full_reg:
2595         save_size += 1 + 4 + record_full_list->u.reg.len;
2596         break;
2597       case record_full_mem:
2598         save_size += 1 + 4 + 8 + record_full_list->u.mem.len;
2599         break;
2600       }
2601
2602   /* Make the new bfd section.  */
2603   osec = bfd_make_section_anyway_with_flags (obfd, "precord",
2604                                              SEC_HAS_CONTENTS
2605                                              | SEC_READONLY);
2606   if (osec == NULL)
2607     error (_("Failed to create 'precord' section for corefile %s: %s"),
2608            recfilename,
2609            bfd_errmsg (bfd_get_error ()));
2610   bfd_set_section_size (obfd, osec, save_size);
2611   bfd_set_section_vma (obfd, osec, 0);
2612   bfd_set_section_alignment (obfd, osec, 0);
2613   bfd_section_lma (obfd, osec) = 0;
2614
2615   /* Save corefile state.  */
2616   write_gcore_file (obfd);
2617
2618   /* Write out the record log.  */
2619   /* Write the magic code.  */
2620   magic = RECORD_FULL_FILE_MAGIC;
2621   if (record_debug)
2622     fprintf_unfiltered (gdb_stdlog,
2623                         "  Writing 4-byte magic cookie "
2624                         "RECORD_FULL_FILE_MAGIC (0x%s)\n",
2625                       phex_nz (magic, 4));
2626   bfdcore_write (obfd, osec, &magic, sizeof (magic), &bfd_offset);
2627
2628   /* Save the entries to recfd and forward execute to the end of
2629      record list.  */
2630   record_full_list = &record_full_first;
2631   while (1)
2632     {
2633       /* Save entry.  */
2634       if (record_full_list != &record_full_first)
2635         {
2636           uint8_t type;
2637           uint32_t regnum, len, signal, count;
2638           uint64_t addr;
2639
2640           type = record_full_list->type;
2641           bfdcore_write (obfd, osec, &type, sizeof (type), &bfd_offset);
2642
2643           switch (record_full_list->type)
2644             {
2645             case record_full_reg: /* reg */
2646               if (record_debug)
2647                 fprintf_unfiltered (gdb_stdlog,
2648                                     "  Writing register %d (1 "
2649                                     "plus %lu plus %d bytes)\n",
2650                                     record_full_list->u.reg.num,
2651                                     (unsigned long) sizeof (regnum),
2652                                     record_full_list->u.reg.len);
2653
2654               /* Write regnum.  */
2655               regnum = netorder32 (record_full_list->u.reg.num);
2656               bfdcore_write (obfd, osec, &regnum,
2657                              sizeof (regnum), &bfd_offset);
2658
2659               /* Write regval.  */
2660               bfdcore_write (obfd, osec,
2661                              record_full_get_loc (record_full_list),
2662                              record_full_list->u.reg.len, &bfd_offset);
2663               break;
2664
2665             case record_full_mem: /* mem */
2666               if (record_debug)
2667                 fprintf_unfiltered (gdb_stdlog,
2668                                     "  Writing memory %s (1 plus "
2669                                     "%lu plus %lu plus %d bytes)\n",
2670                                     paddress (gdbarch,
2671                                               record_full_list->u.mem.addr),
2672                                     (unsigned long) sizeof (addr),
2673                                     (unsigned long) sizeof (len),
2674                                     record_full_list->u.mem.len);
2675
2676               /* Write memlen.  */
2677               len = netorder32 (record_full_list->u.mem.len);
2678               bfdcore_write (obfd, osec, &len, sizeof (len), &bfd_offset);
2679
2680               /* Write memaddr.  */
2681               addr = netorder64 (record_full_list->u.mem.addr);
2682               bfdcore_write (obfd, osec, &addr, 
2683                              sizeof (addr), &bfd_offset);
2684
2685               /* Write memval.  */
2686               bfdcore_write (obfd, osec,
2687                              record_full_get_loc (record_full_list),
2688                              record_full_list->u.mem.len, &bfd_offset);
2689               break;
2690
2691               case record_full_end:
2692                 if (record_debug)
2693                   fprintf_unfiltered (gdb_stdlog,
2694                                       "  Writing record_full_end (1 + "
2695                                       "%lu + %lu bytes)\n", 
2696                                       (unsigned long) sizeof (signal),
2697                                       (unsigned long) sizeof (count));
2698                 /* Write signal value.  */
2699                 signal = netorder32 (record_full_list->u.end.sigval);
2700                 bfdcore_write (obfd, osec, &signal,
2701                                sizeof (signal), &bfd_offset);
2702
2703                 /* Write insn count.  */
2704                 count = netorder32 (record_full_list->u.end.insn_num);
2705                 bfdcore_write (obfd, osec, &count,
2706                                sizeof (count), &bfd_offset);
2707                 break;
2708             }
2709         }
2710
2711       /* Execute entry.  */
2712       record_full_exec_insn (regcache, gdbarch, record_full_list);
2713
2714       if (record_full_list->next)
2715         record_full_list = record_full_list->next;
2716       else
2717         break;
2718     }
2719
2720   /* Reverse execute to cur_record_full_list.  */
2721   while (1)
2722     {
2723       /* Check for beginning and end of log.  */
2724       if (record_full_list == cur_record_full_list)
2725         break;
2726
2727       record_full_exec_insn (regcache, gdbarch, record_full_list);
2728
2729       if (record_full_list->prev)
2730         record_full_list = record_full_list->prev;
2731     }
2732
2733   do_cleanups (set_cleanups);
2734   gdb_bfd_unref (obfd);
2735   discard_cleanups (old_cleanups);
2736
2737   /* Succeeded.  */
2738   printf_filtered (_("Saved core file %s with execution log.\n"),
2739                    recfilename);
2740 }
2741
2742 /* record_full_goto_insn -- rewind the record log (forward or backward,
2743    depending on DIR) to the given entry, changing the program state
2744    correspondingly.  */
2745
2746 static void
2747 record_full_goto_insn (struct record_full_entry *entry,
2748                        enum exec_direction_kind dir)
2749 {
2750   struct cleanup *set_cleanups = record_full_gdb_operation_disable_set ();
2751   struct regcache *regcache = get_current_regcache ();
2752   struct gdbarch *gdbarch = get_regcache_arch (regcache);
2753
2754   /* Assume everything is valid: we will hit the entry,
2755      and we will not hit the end of the recording.  */
2756
2757   if (dir == EXEC_FORWARD)
2758     record_full_list = record_full_list->next;
2759
2760   do
2761     {
2762       record_full_exec_insn (regcache, gdbarch, record_full_list);
2763       if (dir == EXEC_REVERSE)
2764         record_full_list = record_full_list->prev;
2765       else
2766         record_full_list = record_full_list->next;
2767     } while (record_full_list != entry);
2768   do_cleanups (set_cleanups);
2769 }
2770
2771 /* Alias for "target record-full".  */
2772
2773 static void
2774 cmd_record_full_start (char *args, int from_tty)
2775 {
2776   execute_command ("target record-full", from_tty);
2777 }
2778
2779 static void
2780 set_record_full_insn_max_num (char *args, int from_tty,
2781                               struct cmd_list_element *c)
2782 {
2783   if (record_full_insn_num > record_full_insn_max_num)
2784     {
2785       /* Count down record_full_insn_num while releasing records from list.  */
2786       while (record_full_insn_num > record_full_insn_max_num)
2787        {
2788          record_full_list_release_first ();
2789          record_full_insn_num--;
2790        }
2791     }
2792 }
2793
2794 /* The "set record full" command.  */
2795
2796 static void
2797 set_record_full_command (char *args, int from_tty)
2798 {
2799   printf_unfiltered (_("\"set record full\" must be followed "
2800                        "by an apporpriate subcommand.\n"));
2801   help_list (set_record_full_cmdlist, "set record full ", all_commands,
2802              gdb_stdout);
2803 }
2804
2805 /* The "show record full" command.  */
2806
2807 static void
2808 show_record_full_command (char *args, int from_tty)
2809 {
2810   cmd_show_list (show_record_full_cmdlist, from_tty, "");
2811 }
2812
2813 /* Provide a prototype to silence -Wmissing-prototypes.  */
2814 extern initialize_file_ftype _initialize_record_full;
2815
2816 void
2817 _initialize_record_full (void)
2818 {
2819   struct cmd_list_element *c;
2820
2821   /* Init record_full_first.  */
2822   record_full_first.prev = NULL;
2823   record_full_first.next = NULL;
2824   record_full_first.type = record_full_end;
2825
2826   init_record_full_ops ();
2827   add_target (&record_full_ops);
2828   add_deprecated_target_alias (&record_full_ops, "record");
2829   init_record_full_core_ops ();
2830   add_target (&record_full_core_ops);
2831
2832   add_prefix_cmd ("full", class_obscure, cmd_record_full_start,
2833                   _("Start full execution recording."), &record_full_cmdlist,
2834                   "record full ", 0, &record_cmdlist);
2835
2836   c = add_cmd ("restore", class_obscure, cmd_record_full_restore,
2837                _("Restore the execution log from a file.\n\
2838 Argument is filename.  File must be created with 'record save'."),
2839                &record_full_cmdlist);
2840   set_cmd_completer (c, filename_completer);
2841
2842   /* Deprecate the old version without "full" prefix.  */
2843   c = add_alias_cmd ("restore", "full restore", class_obscure, 1,
2844                      &record_cmdlist);
2845   set_cmd_completer (c, filename_completer);
2846   deprecate_cmd (c, "record full restore");
2847
2848   add_prefix_cmd ("full", class_support, set_record_full_command,
2849                   _("Set record options"), &set_record_full_cmdlist,
2850                   "set record full ", 0, &set_record_cmdlist);
2851
2852   add_prefix_cmd ("full", class_support, show_record_full_command,
2853                   _("Show record options"), &show_record_full_cmdlist,
2854                   "show record full ", 0, &show_record_cmdlist);
2855
2856   /* Record instructions number limit command.  */
2857   add_setshow_boolean_cmd ("stop-at-limit", no_class,
2858                            &record_full_stop_at_limit, _("\
2859 Set whether record/replay stops when record/replay buffer becomes full."), _("\
2860 Show whether record/replay stops when record/replay buffer becomes full."),
2861                            _("Default is ON.\n\
2862 When ON, if the record/replay buffer becomes full, ask user what to do.\n\
2863 When OFF, if the record/replay buffer becomes full,\n\
2864 delete the oldest recorded instruction to make room for each new one."),
2865                            NULL, NULL,
2866                            &set_record_full_cmdlist, &show_record_full_cmdlist);
2867
2868   c = add_alias_cmd ("stop-at-limit", "full stop-at-limit", no_class, 1,
2869                      &set_record_cmdlist);
2870   deprecate_cmd (c, "set record full stop-at-limit");
2871
2872   c = add_alias_cmd ("stop-at-limit", "full stop-at-limit", no_class, 1,
2873                      &show_record_cmdlist);
2874   deprecate_cmd (c, "show record full stop-at-limit");
2875
2876   add_setshow_uinteger_cmd ("insn-number-max", no_class,
2877                             &record_full_insn_max_num,
2878                             _("Set record/replay buffer limit."),
2879                             _("Show record/replay buffer limit."), _("\
2880 Set the maximum number of instructions to be stored in the\n\
2881 record/replay buffer.  A value of either \"unlimited\" or zero means no\n\
2882 limit.  Default is 200000."),
2883                             set_record_full_insn_max_num,
2884                             NULL, &set_record_full_cmdlist,
2885                             &show_record_full_cmdlist);
2886
2887   c = add_alias_cmd ("insn-number-max", "full insn-number-max", no_class, 1,
2888                      &set_record_cmdlist);
2889   deprecate_cmd (c, "set record full insn-number-max");
2890
2891   c = add_alias_cmd ("insn-number-max", "full insn-number-max", no_class, 1,
2892                      &show_record_cmdlist);
2893   deprecate_cmd (c, "show record full insn-number-max");
2894
2895   add_setshow_boolean_cmd ("memory-query", no_class,
2896                            &record_full_memory_query, _("\
2897 Set whether query if PREC cannot record memory change of next instruction."),
2898                            _("\
2899 Show whether query if PREC cannot record memory change of next instruction."),
2900                            _("\
2901 Default is OFF.\n\
2902 When ON, query if PREC cannot record memory change of next instruction."),
2903                            NULL, NULL,
2904                            &set_record_full_cmdlist,
2905                            &show_record_full_cmdlist);
2906
2907   c = add_alias_cmd ("memory-query", "full memory-query", no_class, 1,
2908                      &set_record_cmdlist);
2909   deprecate_cmd (c, "set record full memory-query");
2910
2911   c = add_alias_cmd ("memory-query", "full memory-query", no_class, 1,
2912                      &show_record_cmdlist);
2913   deprecate_cmd (c, "show record full memory-query");
2914 }