1 /* Target-struct-independent code to start (run) and stop an inferior
4 Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994,
5 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
7 Free Software Foundation, Inc.
9 This file is part of GDB.
11 This program is free software; you can redistribute it and/or modify
12 it under the terms of the GNU General Public License as published by
13 the Free Software Foundation; either version 2 of the License, or
14 (at your option) any later version.
16 This program is distributed in the hope that it will be useful,
17 but WITHOUT ANY WARRANTY; without even the implied warranty of
18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 GNU General Public License for more details.
21 You should have received a copy of the GNU General Public License
22 along with this program; if not, write to the Free Software
23 Foundation, Inc., 51 Franklin Street, Fifth Floor,
24 Boston, MA 02110-1301, USA. */
27 #include "gdb_string.h"
32 #include "exceptions.h"
33 #include "breakpoint.h"
37 #include "cli/cli-script.h"
39 #include "gdbthread.h"
52 #include "gdb_assert.h"
53 #include "mi/mi-common.h"
55 /* Prototypes for local functions */
57 static void signals_info (char *, int);
59 static void handle_command (char *, int);
61 static void sig_print_info (enum target_signal);
63 static void sig_print_header (void);
65 static void resume_cleanups (void *);
67 static int hook_stop_stub (void *);
69 static int restore_selected_frame (void *);
71 static void build_infrun (void);
73 static int follow_fork (void);
75 static void set_schedlock_func (char *args, int from_tty,
76 struct cmd_list_element *c);
78 struct execution_control_state;
80 static int currently_stepping (struct execution_control_state *ecs);
82 static void xdb_handle_command (char *args, int from_tty);
84 static int prepare_to_proceed (void);
86 void _initialize_infrun (void);
88 int inferior_ignoring_startup_exec_events = 0;
89 int inferior_ignoring_leading_exec_events = 0;
91 /* When set, stop the 'step' command if we enter a function which has
92 no line number information. The normal behavior is that we step
93 over such function. */
94 int step_stop_if_no_debug = 0;
96 show_step_stop_if_no_debug (struct ui_file *file, int from_tty,
97 struct cmd_list_element *c, const char *value)
99 fprintf_filtered (file, _("Mode of the step operation is %s.\n"), value);
102 /* In asynchronous mode, but simulating synchronous execution. */
104 int sync_execution = 0;
106 /* wait_for_inferior and normal_stop use this to notify the user
107 when the inferior stopped in a different thread than it had been
110 static ptid_t previous_inferior_ptid;
112 /* This is true for configurations that may follow through execl() and
113 similar functions. At present this is only true for HP-UX native. */
115 #ifndef MAY_FOLLOW_EXEC
116 #define MAY_FOLLOW_EXEC (0)
119 static int may_follow_exec = MAY_FOLLOW_EXEC;
121 static int debug_infrun = 0;
123 show_debug_infrun (struct ui_file *file, int from_tty,
124 struct cmd_list_element *c, const char *value)
126 fprintf_filtered (file, _("Inferior debugging is %s.\n"), value);
129 /* If the program uses ELF-style shared libraries, then calls to
130 functions in shared libraries go through stubs, which live in a
131 table called the PLT (Procedure Linkage Table). The first time the
132 function is called, the stub sends control to the dynamic linker,
133 which looks up the function's real address, patches the stub so
134 that future calls will go directly to the function, and then passes
135 control to the function.
137 If we are stepping at the source level, we don't want to see any of
138 this --- we just want to skip over the stub and the dynamic linker.
139 The simple approach is to single-step until control leaves the
142 However, on some systems (e.g., Red Hat's 5.2 distribution) the
143 dynamic linker calls functions in the shared C library, so you
144 can't tell from the PC alone whether the dynamic linker is still
145 running. In this case, we use a step-resume breakpoint to get us
146 past the dynamic linker, as if we were using "next" to step over a
149 IN_SOLIB_DYNSYM_RESOLVE_CODE says whether we're in the dynamic
150 linker code or not. Normally, this means we single-step. However,
151 if SKIP_SOLIB_RESOLVER then returns non-zero, then its value is an
152 address where we can place a step-resume breakpoint to get past the
153 linker's symbol resolution function.
155 IN_SOLIB_DYNSYM_RESOLVE_CODE can generally be implemented in a
156 pretty portable way, by comparing the PC against the address ranges
157 of the dynamic linker's sections.
159 SKIP_SOLIB_RESOLVER is generally going to be system-specific, since
160 it depends on internal details of the dynamic linker. It's usually
161 not too hard to figure out where to put a breakpoint, but it
162 certainly isn't portable. SKIP_SOLIB_RESOLVER should do plenty of
163 sanity checking. If it can't figure things out, returning zero and
164 getting the (possibly confusing) stepping behavior is better than
165 signalling an error, which will obscure the change in the
168 /* This function returns TRUE if pc is the address of an instruction
169 that lies within the dynamic linker (such as the event hook, or the
172 This function must be used only when a dynamic linker event has
173 been caught, and the inferior is being stepped out of the hook, or
174 undefined results are guaranteed. */
176 #ifndef SOLIB_IN_DYNAMIC_LINKER
177 #define SOLIB_IN_DYNAMIC_LINKER(pid,pc) 0
180 /* We can't step off a permanent breakpoint in the ordinary way, because we
181 can't remove it. Instead, we have to advance the PC to the next
182 instruction. This macro should expand to a pointer to a function that
183 does that, or zero if we have no such function. If we don't have a
184 definition for it, we have to report an error. */
185 #ifndef SKIP_PERMANENT_BREAKPOINT
186 #define SKIP_PERMANENT_BREAKPOINT (default_skip_permanent_breakpoint)
188 default_skip_permanent_breakpoint (void)
191 The program is stopped at a permanent breakpoint, but GDB does not know\n\
192 how to step past a permanent breakpoint on this architecture. Try using\n\
193 a command like `return' or `jump' to continue execution."));
198 /* Convert the #defines into values. This is temporary until wfi control
199 flow is completely sorted out. */
201 #ifndef HAVE_STEPPABLE_WATCHPOINT
202 #define HAVE_STEPPABLE_WATCHPOINT 0
204 #undef HAVE_STEPPABLE_WATCHPOINT
205 #define HAVE_STEPPABLE_WATCHPOINT 1
208 #ifndef CANNOT_STEP_HW_WATCHPOINTS
209 #define CANNOT_STEP_HW_WATCHPOINTS 0
211 #undef CANNOT_STEP_HW_WATCHPOINTS
212 #define CANNOT_STEP_HW_WATCHPOINTS 1
215 /* Tables of how to react to signals; the user sets them. */
217 static unsigned char *signal_stop;
218 static unsigned char *signal_print;
219 static unsigned char *signal_program;
221 #define SET_SIGS(nsigs,sigs,flags) \
223 int signum = (nsigs); \
224 while (signum-- > 0) \
225 if ((sigs)[signum]) \
226 (flags)[signum] = 1; \
229 #define UNSET_SIGS(nsigs,sigs,flags) \
231 int signum = (nsigs); \
232 while (signum-- > 0) \
233 if ((sigs)[signum]) \
234 (flags)[signum] = 0; \
237 /* Value to pass to target_resume() to cause all threads to resume */
239 #define RESUME_ALL (pid_to_ptid (-1))
241 /* Command list pointer for the "stop" placeholder. */
243 static struct cmd_list_element *stop_command;
245 /* Nonzero if breakpoints are now inserted in the inferior. */
247 static int breakpoints_inserted;
249 /* Function inferior was in as of last step command. */
251 static struct symbol *step_start_function;
253 /* Nonzero if we are expecting a trace trap and should proceed from it. */
255 static int trap_expected;
257 /* Nonzero if we want to give control to the user when we're notified
258 of shared library events by the dynamic linker. */
259 static int stop_on_solib_events;
261 show_stop_on_solib_events (struct ui_file *file, int from_tty,
262 struct cmd_list_element *c, const char *value)
264 fprintf_filtered (file, _("Stopping for shared library events is %s.\n"),
268 /* Nonzero means expecting a trace trap
269 and should stop the inferior and return silently when it happens. */
273 /* Nonzero means expecting a trap and caller will handle it themselves.
274 It is used after attach, due to attaching to a process;
275 when running in the shell before the child program has been exec'd;
276 and when running some kinds of remote stuff (FIXME?). */
278 enum stop_kind stop_soon;
280 /* Nonzero if proceed is being used for a "finish" command or a similar
281 situation when stop_registers should be saved. */
283 int proceed_to_finish;
285 /* Save register contents here when about to pop a stack dummy frame,
286 if-and-only-if proceed_to_finish is set.
287 Thus this contains the return value from the called function (assuming
288 values are returned in a register). */
290 struct regcache *stop_registers;
292 /* Nonzero if program stopped due to error trying to insert breakpoints. */
294 static int breakpoints_failed;
296 /* Nonzero after stop if current stack frame should be printed. */
298 static int stop_print_frame;
300 static struct breakpoint *step_resume_breakpoint = NULL;
302 /* This is a cached copy of the pid/waitstatus of the last event
303 returned by target_wait()/deprecated_target_wait_hook(). This
304 information is returned by get_last_target_status(). */
305 static ptid_t target_last_wait_ptid;
306 static struct target_waitstatus target_last_waitstatus;
308 /* This is used to remember when a fork, vfork or exec event
309 was caught by a catchpoint, and thus the event is to be
310 followed at the next resume of the inferior, and not
314 enum target_waitkind kind;
321 char *execd_pathname;
325 static const char follow_fork_mode_child[] = "child";
326 static const char follow_fork_mode_parent[] = "parent";
328 static const char *follow_fork_mode_kind_names[] = {
329 follow_fork_mode_child,
330 follow_fork_mode_parent,
334 static const char *follow_fork_mode_string = follow_fork_mode_parent;
336 show_follow_fork_mode_string (struct ui_file *file, int from_tty,
337 struct cmd_list_element *c, const char *value)
339 fprintf_filtered (file, _("\
340 Debugger response to a program call of fork or vfork is \"%s\".\n"),
348 int follow_child = (follow_fork_mode_string == follow_fork_mode_child);
350 return target_follow_fork (follow_child);
354 follow_inferior_reset_breakpoints (void)
356 /* Was there a step_resume breakpoint? (There was if the user
357 did a "next" at the fork() call.) If so, explicitly reset its
360 step_resumes are a form of bp that are made to be per-thread.
361 Since we created the step_resume bp when the parent process
362 was being debugged, and now are switching to the child process,
363 from the breakpoint package's viewpoint, that's a switch of
364 "threads". We must update the bp's notion of which thread
365 it is for, or it'll be ignored when it triggers. */
367 if (step_resume_breakpoint)
368 breakpoint_re_set_thread (step_resume_breakpoint);
370 /* Reinsert all breakpoints in the child. The user may have set
371 breakpoints after catching the fork, in which case those
372 were never set in the child, but only in the parent. This makes
373 sure the inserted breakpoints match the breakpoint list. */
375 breakpoint_re_set ();
376 insert_breakpoints ();
379 /* EXECD_PATHNAME is assumed to be non-NULL. */
382 follow_exec (int pid, char *execd_pathname)
385 struct target_ops *tgt;
387 if (!may_follow_exec)
390 /* This is an exec event that we actually wish to pay attention to.
391 Refresh our symbol table to the newly exec'd program, remove any
394 If there are breakpoints, they aren't really inserted now,
395 since the exec() transformed our inferior into a fresh set
398 We want to preserve symbolic breakpoints on the list, since
399 we have hopes that they can be reset after the new a.out's
400 symbol table is read.
402 However, any "raw" breakpoints must be removed from the list
403 (e.g., the solib bp's), since their address is probably invalid
406 And, we DON'T want to call delete_breakpoints() here, since
407 that may write the bp's "shadow contents" (the instruction
408 value that was overwritten witha TRAP instruction). Since
409 we now have a new a.out, those shadow contents aren't valid. */
410 update_breakpoints_after_exec ();
412 /* If there was one, it's gone now. We cannot truly step-to-next
413 statement through an exec(). */
414 step_resume_breakpoint = NULL;
415 step_range_start = 0;
418 /* What is this a.out's name? */
419 printf_unfiltered (_("Executing new program: %s\n"), execd_pathname);
421 /* We've followed the inferior through an exec. Therefore, the
422 inferior has essentially been killed & reborn. */
424 /* First collect the run target in effect. */
425 tgt = find_run_target ();
426 /* If we can't find one, things are in a very strange state... */
428 error (_("Could find run target to save before following exec"));
430 gdb_flush (gdb_stdout);
431 target_mourn_inferior ();
432 inferior_ptid = pid_to_ptid (saved_pid);
433 /* Because mourn_inferior resets inferior_ptid. */
436 /* That a.out is now the one to use. */
437 exec_file_attach (execd_pathname, 0);
439 /* And also is where symbols can be found. */
440 symbol_file_add_main (execd_pathname, 0);
442 /* Reset the shared library package. This ensures that we get
443 a shlib event when the child reaches "_start", at which point
444 the dld will have had a chance to initialize the child. */
445 #if defined(SOLIB_RESTART)
448 #ifdef SOLIB_CREATE_INFERIOR_HOOK
449 SOLIB_CREATE_INFERIOR_HOOK (PIDGET (inferior_ptid));
451 solib_create_inferior_hook ();
454 /* Reinsert all breakpoints. (Those which were symbolic have
455 been reset to the proper address in the new a.out, thanks
456 to symbol_file_command...) */
457 insert_breakpoints ();
459 /* The next resume of this inferior should bring it to the shlib
460 startup breakpoints. (If the user had also set bp's on
461 "main" from the old (parent) process, then they'll auto-
462 matically get reset there in the new process.) */
465 /* Non-zero if we just simulating a single-step. This is needed
466 because we cannot remove the breakpoints in the inferior process
467 until after the `wait' in `wait_for_inferior'. */
468 static int singlestep_breakpoints_inserted_p = 0;
470 /* The thread we inserted single-step breakpoints for. */
471 static ptid_t singlestep_ptid;
473 /* If another thread hit the singlestep breakpoint, we save the original
474 thread here so that we can resume single-stepping it later. */
475 static ptid_t saved_singlestep_ptid;
476 static int stepping_past_singlestep_breakpoint;
479 /* Things to clean up if we QUIT out of resume (). */
481 resume_cleanups (void *ignore)
486 static const char schedlock_off[] = "off";
487 static const char schedlock_on[] = "on";
488 static const char schedlock_step[] = "step";
489 static const char *scheduler_enums[] = {
495 static const char *scheduler_mode = schedlock_off;
497 show_scheduler_mode (struct ui_file *file, int from_tty,
498 struct cmd_list_element *c, const char *value)
500 fprintf_filtered (file, _("\
501 Mode for locking scheduler during execution is \"%s\".\n"),
506 set_schedlock_func (char *args, int from_tty, struct cmd_list_element *c)
508 if (!target_can_lock_scheduler)
510 scheduler_mode = schedlock_off;
511 error (_("Target '%s' cannot support this command."), target_shortname);
516 /* Resume the inferior, but allow a QUIT. This is useful if the user
517 wants to interrupt some lengthy single-stepping operation
518 (for child processes, the SIGINT goes to the inferior, and so
519 we get a SIGINT random_signal, but for remote debugging and perhaps
520 other targets, that's not true).
522 STEP nonzero if we should step (zero to continue instead).
523 SIG is the signal to give the inferior (zero for none). */
525 resume (int step, enum target_signal sig)
527 int should_resume = 1;
528 struct cleanup *old_cleanups = make_cleanup (resume_cleanups, 0);
532 fprintf_unfiltered (gdb_stdlog, "infrun: resume (step=%d, signal=%d)\n",
535 /* FIXME: calling breakpoint_here_p (read_pc ()) three times! */
538 /* Some targets (e.g. Solaris x86) have a kernel bug when stepping
539 over an instruction that causes a page fault without triggering
540 a hardware watchpoint. The kernel properly notices that it shouldn't
541 stop, because the hardware watchpoint is not triggered, but it forgets
542 the step request and continues the program normally.
543 Work around the problem by removing hardware watchpoints if a step is
544 requested, GDB will check for a hardware watchpoint trigger after the
546 if (CANNOT_STEP_HW_WATCHPOINTS && step && breakpoints_inserted)
547 remove_hw_watchpoints ();
550 /* Normally, by the time we reach `resume', the breakpoints are either
551 removed or inserted, as appropriate. The exception is if we're sitting
552 at a permanent breakpoint; we need to step over it, but permanent
553 breakpoints can't be removed. So we have to test for it here. */
554 if (breakpoint_here_p (read_pc ()) == permanent_breakpoint_here)
555 SKIP_PERMANENT_BREAKPOINT ();
557 if (SOFTWARE_SINGLE_STEP_P () && step)
559 /* Do it the hard way, w/temp breakpoints */
560 SOFTWARE_SINGLE_STEP (sig, 1 /*insert-breakpoints */ );
561 /* ...and don't ask hardware to do it. */
563 /* and do not pull these breakpoints until after a `wait' in
564 `wait_for_inferior' */
565 singlestep_breakpoints_inserted_p = 1;
566 singlestep_ptid = inferior_ptid;
569 /* If there were any forks/vforks/execs that were caught and are
570 now to be followed, then do so. */
571 switch (pending_follow.kind)
573 case TARGET_WAITKIND_FORKED:
574 case TARGET_WAITKIND_VFORKED:
575 pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
580 case TARGET_WAITKIND_EXECD:
581 /* follow_exec is called as soon as the exec event is seen. */
582 pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
589 /* Install inferior's terminal modes. */
590 target_terminal_inferior ();
596 resume_ptid = RESUME_ALL; /* Default */
598 if ((step || singlestep_breakpoints_inserted_p)
599 && (stepping_past_singlestep_breakpoint
600 || (!breakpoints_inserted && breakpoint_here_p (read_pc ()))))
602 /* Stepping past a breakpoint without inserting breakpoints.
603 Make sure only the current thread gets to step, so that
604 other threads don't sneak past breakpoints while they are
607 resume_ptid = inferior_ptid;
610 if ((scheduler_mode == schedlock_on)
611 || (scheduler_mode == schedlock_step
612 && (step || singlestep_breakpoints_inserted_p)))
614 /* User-settable 'scheduler' mode requires solo thread resume. */
615 resume_ptid = inferior_ptid;
618 if (CANNOT_STEP_BREAKPOINT)
620 /* Most targets can step a breakpoint instruction, thus
621 executing it normally. But if this one cannot, just
622 continue and we will hit it anyway. */
623 if (step && breakpoints_inserted && breakpoint_here_p (read_pc ()))
626 target_resume (resume_ptid, step, sig);
629 discard_cleanups (old_cleanups);
633 /* Clear out all variables saying what to do when inferior is continued.
634 First do this, then set the ones you want, then call `proceed'. */
637 clear_proceed_status (void)
640 step_range_start = 0;
642 step_frame_id = null_frame_id;
643 step_over_calls = STEP_OVER_UNDEBUGGABLE;
645 stop_soon = NO_STOP_QUIETLY;
646 proceed_to_finish = 0;
647 breakpoint_proceeded = 1; /* We're about to proceed... */
649 /* Discard any remaining commands or status from previous stop. */
650 bpstat_clear (&stop_bpstat);
653 /* This should be suitable for any targets that support threads. */
656 prepare_to_proceed (void)
659 struct target_waitstatus wait_status;
661 /* Get the last target status returned by target_wait(). */
662 get_last_target_status (&wait_ptid, &wait_status);
664 /* Make sure we were stopped either at a breakpoint, or because
666 if (wait_status.kind != TARGET_WAITKIND_STOPPED
667 || (wait_status.value.sig != TARGET_SIGNAL_TRAP
668 && wait_status.value.sig != TARGET_SIGNAL_INT))
673 if (!ptid_equal (wait_ptid, minus_one_ptid)
674 && !ptid_equal (inferior_ptid, wait_ptid))
676 /* Switched over from WAIT_PID. */
677 CORE_ADDR wait_pc = read_pc_pid (wait_ptid);
679 if (wait_pc != read_pc ())
681 /* Switch back to WAIT_PID thread. */
682 inferior_ptid = wait_ptid;
684 /* FIXME: This stuff came from switch_to_thread() in
685 thread.c (which should probably be a public function). */
686 flush_cached_frames ();
687 registers_changed ();
689 select_frame (get_current_frame ());
692 /* We return 1 to indicate that there is a breakpoint here,
693 so we need to step over it before continuing to avoid
694 hitting it straight away. */
695 if (breakpoint_here_p (wait_pc))
703 /* Record the pc of the program the last time it stopped. This is
704 just used internally by wait_for_inferior, but need to be preserved
705 over calls to it and cleared when the inferior is started. */
706 static CORE_ADDR prev_pc;
708 /* Basic routine for continuing the program in various fashions.
710 ADDR is the address to resume at, or -1 for resume where stopped.
711 SIGGNAL is the signal to give it, or 0 for none,
712 or -1 for act according to how it stopped.
713 STEP is nonzero if should trap after one instruction.
714 -1 means return after that and print nothing.
715 You should probably set various step_... variables
716 before calling here, if you are stepping.
718 You should call clear_proceed_status before calling proceed. */
721 proceed (CORE_ADDR addr, enum target_signal siggnal, int step)
726 step_start_function = find_pc_function (read_pc ());
730 if (addr == (CORE_ADDR) -1)
732 if (read_pc () == stop_pc && breakpoint_here_p (read_pc ()))
733 /* There is a breakpoint at the address we will resume at,
734 step one instruction before inserting breakpoints so that
735 we do not stop right away (and report a second hit at this
738 else if (gdbarch_single_step_through_delay_p (current_gdbarch)
739 && gdbarch_single_step_through_delay (current_gdbarch,
740 get_current_frame ()))
741 /* We stepped onto an instruction that needs to be stepped
742 again before re-inserting the breakpoint, do so. */
751 fprintf_unfiltered (gdb_stdlog,
752 "infrun: proceed (addr=0x%s, signal=%d, step=%d)\n",
753 paddr_nz (addr), siggnal, step);
755 /* In a multi-threaded task we may select another thread
756 and then continue or step.
758 But if the old thread was stopped at a breakpoint, it
759 will immediately cause another breakpoint stop without
760 any execution (i.e. it will report a breakpoint hit
761 incorrectly). So we must step over it first.
763 prepare_to_proceed checks the current thread against the thread
764 that reported the most recent event. If a step-over is required
765 it returns TRUE and sets the current thread to the old thread. */
766 if (prepare_to_proceed () && breakpoint_here_p (read_pc ()))
770 /* We will get a trace trap after one instruction.
771 Continue it automatically and insert breakpoints then. */
775 insert_breakpoints ();
776 /* If we get here there was no call to error() in
777 insert breakpoints -- so they were inserted. */
778 breakpoints_inserted = 1;
781 if (siggnal != TARGET_SIGNAL_DEFAULT)
782 stop_signal = siggnal;
783 /* If this signal should not be seen by program,
784 give it zero. Used for debugging signals. */
785 else if (!signal_program[stop_signal])
786 stop_signal = TARGET_SIGNAL_0;
788 annotate_starting ();
790 /* Make sure that output from GDB appears before output from the
792 gdb_flush (gdb_stdout);
794 /* Refresh prev_pc value just prior to resuming. This used to be
795 done in stop_stepping, however, setting prev_pc there did not handle
796 scenarios such as inferior function calls or returning from
797 a function via the return command. In those cases, the prev_pc
798 value was not set properly for subsequent commands. The prev_pc value
799 is used to initialize the starting line number in the ecs. With an
800 invalid value, the gdb next command ends up stopping at the position
801 represented by the next line table entry past our start position.
802 On platforms that generate one line table entry per line, this
803 is not a problem. However, on the ia64, the compiler generates
804 extraneous line table entries that do not increase the line number.
805 When we issue the gdb next command on the ia64 after an inferior call
806 or a return command, we often end up a few instructions forward, still
807 within the original line we started.
809 An attempt was made to have init_execution_control_state () refresh
810 the prev_pc value before calculating the line number. This approach
811 did not work because on platforms that use ptrace, the pc register
812 cannot be read unless the inferior is stopped. At that point, we
813 are not guaranteed the inferior is stopped and so the read_pc ()
814 call can fail. Setting the prev_pc value here ensures the value is
815 updated correctly when the inferior is stopped. */
816 prev_pc = read_pc ();
818 /* Resume inferior. */
819 resume (oneproc || step || bpstat_should_step (), stop_signal);
821 /* Wait for it to stop (if not standalone)
822 and in any case decode why it stopped, and act accordingly. */
823 /* Do this only if we are not using the event loop, or if the target
824 does not support asynchronous execution. */
825 if (!target_can_async_p ())
827 wait_for_inferior ();
833 /* Start remote-debugging of a machine over a serial link. */
836 start_remote (int from_tty)
839 init_wait_for_inferior ();
840 stop_soon = STOP_QUIETLY;
843 /* Always go on waiting for the target, regardless of the mode. */
844 /* FIXME: cagney/1999-09-23: At present it isn't possible to
845 indicate to wait_for_inferior that a target should timeout if
846 nothing is returned (instead of just blocking). Because of this,
847 targets expecting an immediate response need to, internally, set
848 things up so that the target_wait() is forced to eventually
850 /* FIXME: cagney/1999-09-24: It isn't possible for target_open() to
851 differentiate to its caller what the state of the target is after
852 the initial open has been performed. Here we're assuming that
853 the target has stopped. It should be possible to eventually have
854 target_open() return to the caller an indication that the target
855 is currently running and GDB state should be set to the same as
857 wait_for_inferior ();
859 /* Now that the inferior has stopped, do any bookkeeping like
860 loading shared libraries. We want to do this before normal_stop,
861 so that the displayed frame is up to date. */
862 post_create_inferior (¤t_target, from_tty);
867 /* Initialize static vars when a new inferior begins. */
870 init_wait_for_inferior (void)
872 /* These are meaningless until the first time through wait_for_inferior. */
875 breakpoints_inserted = 0;
876 breakpoint_init_inferior (inf_starting);
878 /* Don't confuse first call to proceed(). */
879 stop_signal = TARGET_SIGNAL_0;
881 /* The first resume is not following a fork/vfork/exec. */
882 pending_follow.kind = TARGET_WAITKIND_SPURIOUS; /* I.e., none. */
884 clear_proceed_status ();
886 stepping_past_singlestep_breakpoint = 0;
889 /* This enum encodes possible reasons for doing a target_wait, so that
890 wfi can call target_wait in one place. (Ultimately the call will be
891 moved out of the infinite loop entirely.) */
895 infwait_normal_state,
896 infwait_thread_hop_state,
897 infwait_nonstep_watch_state
900 /* Why did the inferior stop? Used to print the appropriate messages
901 to the interface from within handle_inferior_event(). */
902 enum inferior_stop_reason
904 /* We don't know why. */
906 /* Step, next, nexti, stepi finished. */
908 /* Found breakpoint. */
910 /* Inferior terminated by signal. */
912 /* Inferior exited. */
914 /* Inferior received signal, and user asked to be notified. */
918 /* This structure contains what used to be local variables in
919 wait_for_inferior. Probably many of them can return to being
920 locals in handle_inferior_event. */
922 struct execution_control_state
924 struct target_waitstatus ws;
925 struct target_waitstatus *wp;
928 CORE_ADDR stop_func_start;
929 CORE_ADDR stop_func_end;
930 char *stop_func_name;
931 struct symtab_and_line sal;
933 struct symtab *current_symtab;
934 int handling_longjmp; /* FIXME */
936 ptid_t saved_inferior_ptid;
937 int step_after_step_resume_breakpoint;
938 int stepping_through_solib_after_catch;
939 bpstat stepping_through_solib_catchpoints;
940 int new_thread_event;
941 struct target_waitstatus tmpstatus;
942 enum infwait_states infwait_state;
947 void init_execution_control_state (struct execution_control_state *ecs);
949 void handle_inferior_event (struct execution_control_state *ecs);
951 static void step_into_function (struct execution_control_state *ecs);
952 static void insert_step_resume_breakpoint_at_frame (struct frame_info *step_frame);
953 static void insert_step_resume_breakpoint_at_caller (struct frame_info *);
954 static void insert_step_resume_breakpoint_at_sal (struct symtab_and_line sr_sal,
955 struct frame_id sr_id);
956 static void stop_stepping (struct execution_control_state *ecs);
957 static void prepare_to_wait (struct execution_control_state *ecs);
958 static void keep_going (struct execution_control_state *ecs);
959 static void print_stop_reason (enum inferior_stop_reason stop_reason,
962 /* Wait for control to return from inferior to debugger.
963 If inferior gets a signal, we may decide to start it up again
964 instead of returning. That is why there is a loop in this function.
965 When this function actually returns it means the inferior
966 should be left stopped and GDB should read more commands. */
969 wait_for_inferior (void)
971 struct cleanup *old_cleanups;
972 struct execution_control_state ecss;
973 struct execution_control_state *ecs;
976 fprintf_unfiltered (gdb_stdlog, "infrun: wait_for_inferior\n");
978 old_cleanups = make_cleanup (delete_step_resume_breakpoint,
979 &step_resume_breakpoint);
981 /* wfi still stays in a loop, so it's OK just to take the address of
982 a local to get the ecs pointer. */
985 /* Fill in with reasonable starting values. */
986 init_execution_control_state (ecs);
988 /* We'll update this if & when we switch to a new thread. */
989 previous_inferior_ptid = inferior_ptid;
991 overlay_cache_invalid = 1;
993 /* We have to invalidate the registers BEFORE calling target_wait
994 because they can be loaded from the target while in target_wait.
995 This makes remote debugging a bit more efficient for those
996 targets that provide critical registers as part of their normal
999 registers_changed ();
1003 if (deprecated_target_wait_hook)
1004 ecs->ptid = deprecated_target_wait_hook (ecs->waiton_ptid, ecs->wp);
1006 ecs->ptid = target_wait (ecs->waiton_ptid, ecs->wp);
1008 /* Now figure out what to do with the result of the result. */
1009 handle_inferior_event (ecs);
1011 if (!ecs->wait_some_more)
1014 do_cleanups (old_cleanups);
1017 /* Asynchronous version of wait_for_inferior. It is called by the
1018 event loop whenever a change of state is detected on the file
1019 descriptor corresponding to the target. It can be called more than
1020 once to complete a single execution command. In such cases we need
1021 to keep the state in a global variable ASYNC_ECSS. If it is the
1022 last time that this function is called for a single execution
1023 command, then report to the user that the inferior has stopped, and
1024 do the necessary cleanups. */
1026 struct execution_control_state async_ecss;
1027 struct execution_control_state *async_ecs;
1030 fetch_inferior_event (void *client_data)
1032 static struct cleanup *old_cleanups;
1034 async_ecs = &async_ecss;
1036 if (!async_ecs->wait_some_more)
1038 old_cleanups = make_exec_cleanup (delete_step_resume_breakpoint,
1039 &step_resume_breakpoint);
1041 /* Fill in with reasonable starting values. */
1042 init_execution_control_state (async_ecs);
1044 /* We'll update this if & when we switch to a new thread. */
1045 previous_inferior_ptid = inferior_ptid;
1047 overlay_cache_invalid = 1;
1049 /* We have to invalidate the registers BEFORE calling target_wait
1050 because they can be loaded from the target while in target_wait.
1051 This makes remote debugging a bit more efficient for those
1052 targets that provide critical registers as part of their normal
1053 status mechanism. */
1055 registers_changed ();
1058 if (deprecated_target_wait_hook)
1060 deprecated_target_wait_hook (async_ecs->waiton_ptid, async_ecs->wp);
1062 async_ecs->ptid = target_wait (async_ecs->waiton_ptid, async_ecs->wp);
1064 /* Now figure out what to do with the result of the result. */
1065 handle_inferior_event (async_ecs);
1067 if (!async_ecs->wait_some_more)
1069 /* Do only the cleanups that have been added by this
1070 function. Let the continuations for the commands do the rest,
1071 if there are any. */
1072 do_exec_cleanups (old_cleanups);
1074 if (step_multi && stop_step)
1075 inferior_event_handler (INF_EXEC_CONTINUE, NULL);
1077 inferior_event_handler (INF_EXEC_COMPLETE, NULL);
1081 /* Prepare an execution control state for looping through a
1082 wait_for_inferior-type loop. */
1085 init_execution_control_state (struct execution_control_state *ecs)
1087 ecs->another_trap = 0;
1088 ecs->random_signal = 0;
1089 ecs->step_after_step_resume_breakpoint = 0;
1090 ecs->handling_longjmp = 0; /* FIXME */
1091 ecs->stepping_through_solib_after_catch = 0;
1092 ecs->stepping_through_solib_catchpoints = NULL;
1093 ecs->sal = find_pc_line (prev_pc, 0);
1094 ecs->current_line = ecs->sal.line;
1095 ecs->current_symtab = ecs->sal.symtab;
1096 ecs->infwait_state = infwait_normal_state;
1097 ecs->waiton_ptid = pid_to_ptid (-1);
1098 ecs->wp = &(ecs->ws);
1101 /* Return the cached copy of the last pid/waitstatus returned by
1102 target_wait()/deprecated_target_wait_hook(). The data is actually
1103 cached by handle_inferior_event(), which gets called immediately
1104 after target_wait()/deprecated_target_wait_hook(). */
1107 get_last_target_status (ptid_t *ptidp, struct target_waitstatus *status)
1109 *ptidp = target_last_wait_ptid;
1110 *status = target_last_waitstatus;
1114 nullify_last_target_wait_ptid (void)
1116 target_last_wait_ptid = minus_one_ptid;
1119 /* Switch thread contexts, maintaining "infrun state". */
1122 context_switch (struct execution_control_state *ecs)
1124 /* Caution: it may happen that the new thread (or the old one!)
1125 is not in the thread list. In this case we must not attempt
1126 to "switch context", or we run the risk that our context may
1127 be lost. This may happen as a result of the target module
1128 mishandling thread creation. */
1130 if (in_thread_list (inferior_ptid) && in_thread_list (ecs->ptid))
1131 { /* Perform infrun state context switch: */
1132 /* Save infrun state for the old thread. */
1133 save_infrun_state (inferior_ptid, prev_pc,
1134 trap_expected, step_resume_breakpoint,
1136 step_range_end, &step_frame_id,
1137 ecs->handling_longjmp, ecs->another_trap,
1138 ecs->stepping_through_solib_after_catch,
1139 ecs->stepping_through_solib_catchpoints,
1140 ecs->current_line, ecs->current_symtab);
1142 /* Load infrun state for the new thread. */
1143 load_infrun_state (ecs->ptid, &prev_pc,
1144 &trap_expected, &step_resume_breakpoint,
1146 &step_range_end, &step_frame_id,
1147 &ecs->handling_longjmp, &ecs->another_trap,
1148 &ecs->stepping_through_solib_after_catch,
1149 &ecs->stepping_through_solib_catchpoints,
1150 &ecs->current_line, &ecs->current_symtab);
1152 inferior_ptid = ecs->ptid;
1156 adjust_pc_after_break (struct execution_control_state *ecs)
1158 CORE_ADDR breakpoint_pc;
1160 /* If this target does not decrement the PC after breakpoints, then
1161 we have nothing to do. */
1162 if (DECR_PC_AFTER_BREAK == 0)
1165 /* If we've hit a breakpoint, we'll normally be stopped with SIGTRAP. If
1166 we aren't, just return.
1168 We assume that waitkinds other than TARGET_WAITKIND_STOPPED are not
1169 affected by DECR_PC_AFTER_BREAK. Other waitkinds which are implemented
1170 by software breakpoints should be handled through the normal breakpoint
1173 NOTE drow/2004-01-31: On some targets, breakpoints may generate
1174 different signals (SIGILL or SIGEMT for instance), but it is less
1175 clear where the PC is pointing afterwards. It may not match
1176 DECR_PC_AFTER_BREAK. I don't know any specific target that generates
1177 these signals at breakpoints (the code has been in GDB since at least
1178 1992) so I can not guess how to handle them here.
1180 In earlier versions of GDB, a target with HAVE_NONSTEPPABLE_WATCHPOINTS
1181 would have the PC after hitting a watchpoint affected by
1182 DECR_PC_AFTER_BREAK. I haven't found any target with both of these set
1183 in GDB history, and it seems unlikely to be correct, so
1184 HAVE_NONSTEPPABLE_WATCHPOINTS is not checked here. */
1186 if (ecs->ws.kind != TARGET_WAITKIND_STOPPED)
1189 if (ecs->ws.value.sig != TARGET_SIGNAL_TRAP)
1192 /* Find the location where (if we've hit a breakpoint) the
1193 breakpoint would be. */
1194 breakpoint_pc = read_pc_pid (ecs->ptid) - DECR_PC_AFTER_BREAK;
1196 if (SOFTWARE_SINGLE_STEP_P ())
1198 /* When using software single-step, a SIGTRAP can only indicate
1199 an inserted breakpoint. This actually makes things
1201 if (singlestep_breakpoints_inserted_p)
1202 /* When software single stepping, the instruction at [prev_pc]
1203 is never a breakpoint, but the instruction following
1204 [prev_pc] (in program execution order) always is. Assume
1205 that following instruction was reached and hence a software
1206 breakpoint was hit. */
1207 write_pc_pid (breakpoint_pc, ecs->ptid);
1208 else if (software_breakpoint_inserted_here_p (breakpoint_pc))
1209 /* The inferior was free running (i.e., no single-step
1210 breakpoints inserted) and it hit a software breakpoint. */
1211 write_pc_pid (breakpoint_pc, ecs->ptid);
1215 /* When using hardware single-step, a SIGTRAP is reported for
1216 both a completed single-step and a software breakpoint. Need
1217 to differentiate between the two as the latter needs
1218 adjusting but the former does not.
1220 When the thread to be examined does not match the current thread
1221 context we can't use currently_stepping, so assume no
1222 single-stepping in this case. */
1223 if (ptid_equal (ecs->ptid, inferior_ptid) && currently_stepping (ecs))
1225 if (prev_pc == breakpoint_pc
1226 && software_breakpoint_inserted_here_p (breakpoint_pc))
1227 /* Hardware single-stepped a software breakpoint (as
1228 occures when the inferior is resumed with PC pointing
1229 at not-yet-hit software breakpoint). Since the
1230 breakpoint really is executed, the inferior needs to be
1231 backed up to the breakpoint address. */
1232 write_pc_pid (breakpoint_pc, ecs->ptid);
1236 if (software_breakpoint_inserted_here_p (breakpoint_pc))
1237 /* The inferior was free running (i.e., no hardware
1238 single-step and no possibility of a false SIGTRAP) and
1239 hit a software breakpoint. */
1240 write_pc_pid (breakpoint_pc, ecs->ptid);
1245 /* Given an execution control state that has been freshly filled in
1246 by an event from the inferior, figure out what it means and take
1247 appropriate action. */
1249 int stepped_after_stopped_by_watchpoint;
1252 handle_inferior_event (struct execution_control_state *ecs)
1254 /* NOTE: bje/2005-05-02: If you're looking at this code and thinking
1255 that the variable stepped_after_stopped_by_watchpoint isn't used,
1256 then you're wrong! See remote.c:remote_stopped_data_address. */
1258 int sw_single_step_trap_p = 0;
1259 int stopped_by_watchpoint = -1; /* Mark as unknown. */
1261 /* Cache the last pid/waitstatus. */
1262 target_last_wait_ptid = ecs->ptid;
1263 target_last_waitstatus = *ecs->wp;
1265 adjust_pc_after_break (ecs);
1267 switch (ecs->infwait_state)
1269 case infwait_thread_hop_state:
1271 fprintf_unfiltered (gdb_stdlog, "infrun: infwait_thread_hop_state\n");
1272 /* Cancel the waiton_ptid. */
1273 ecs->waiton_ptid = pid_to_ptid (-1);
1276 case infwait_normal_state:
1278 fprintf_unfiltered (gdb_stdlog, "infrun: infwait_normal_state\n");
1279 stepped_after_stopped_by_watchpoint = 0;
1282 case infwait_nonstep_watch_state:
1284 fprintf_unfiltered (gdb_stdlog,
1285 "infrun: infwait_nonstep_watch_state\n");
1286 insert_breakpoints ();
1288 /* FIXME-maybe: is this cleaner than setting a flag? Does it
1289 handle things like signals arriving and other things happening
1290 in combination correctly? */
1291 stepped_after_stopped_by_watchpoint = 1;
1295 internal_error (__FILE__, __LINE__, _("bad switch"));
1297 ecs->infwait_state = infwait_normal_state;
1299 flush_cached_frames ();
1301 /* If it's a new process, add it to the thread database */
1303 ecs->new_thread_event = (!ptid_equal (ecs->ptid, inferior_ptid)
1304 && !ptid_equal (ecs->ptid, minus_one_ptid)
1305 && !in_thread_list (ecs->ptid));
1307 if (ecs->ws.kind != TARGET_WAITKIND_EXITED
1308 && ecs->ws.kind != TARGET_WAITKIND_SIGNALLED && ecs->new_thread_event)
1310 add_thread (ecs->ptid);
1312 ui_out_text (uiout, "[New ");
1313 ui_out_text (uiout, target_pid_or_tid_to_str (ecs->ptid));
1314 ui_out_text (uiout, "]\n");
1317 switch (ecs->ws.kind)
1319 case TARGET_WAITKIND_LOADED:
1321 fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_LOADED\n");
1322 /* Ignore gracefully during startup of the inferior, as it
1323 might be the shell which has just loaded some objects,
1324 otherwise add the symbols for the newly loaded objects. */
1326 if (stop_soon == NO_STOP_QUIETLY)
1328 /* Remove breakpoints, SOLIB_ADD might adjust
1329 breakpoint addresses via breakpoint_re_set. */
1330 if (breakpoints_inserted)
1331 remove_breakpoints ();
1333 /* Check for any newly added shared libraries if we're
1334 supposed to be adding them automatically. Switch
1335 terminal for any messages produced by
1336 breakpoint_re_set. */
1337 target_terminal_ours_for_output ();
1338 /* NOTE: cagney/2003-11-25: Make certain that the target
1339 stack's section table is kept up-to-date. Architectures,
1340 (e.g., PPC64), use the section table to perform
1341 operations such as address => section name and hence
1342 require the table to contain all sections (including
1343 those found in shared libraries). */
1344 /* NOTE: cagney/2003-11-25: Pass current_target and not
1345 exec_ops to SOLIB_ADD. This is because current GDB is
1346 only tooled to propagate section_table changes out from
1347 the "current_target" (see target_resize_to_sections), and
1348 not up from the exec stratum. This, of course, isn't
1349 right. "infrun.c" should only interact with the
1350 exec/process stratum, instead relying on the target stack
1351 to propagate relevant changes (stop, section table
1352 changed, ...) up to other layers. */
1353 SOLIB_ADD (NULL, 0, ¤t_target, auto_solib_add);
1354 target_terminal_inferior ();
1356 /* Reinsert breakpoints and continue. */
1357 if (breakpoints_inserted)
1358 insert_breakpoints ();
1361 resume (0, TARGET_SIGNAL_0);
1362 prepare_to_wait (ecs);
1365 case TARGET_WAITKIND_SPURIOUS:
1367 fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SPURIOUS\n");
1368 resume (0, TARGET_SIGNAL_0);
1369 prepare_to_wait (ecs);
1372 case TARGET_WAITKIND_EXITED:
1374 fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_EXITED\n");
1375 target_terminal_ours (); /* Must do this before mourn anyway */
1376 print_stop_reason (EXITED, ecs->ws.value.integer);
1378 /* Record the exit code in the convenience variable $_exitcode, so
1379 that the user can inspect this again later. */
1380 set_internalvar (lookup_internalvar ("_exitcode"),
1381 value_from_longest (builtin_type_int,
1382 (LONGEST) ecs->ws.value.integer));
1383 gdb_flush (gdb_stdout);
1384 target_mourn_inferior ();
1385 singlestep_breakpoints_inserted_p = 0; /*SOFTWARE_SINGLE_STEP_P() */
1386 stop_print_frame = 0;
1387 stop_stepping (ecs);
1390 case TARGET_WAITKIND_SIGNALLED:
1392 fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SIGNALLED\n");
1393 stop_print_frame = 0;
1394 stop_signal = ecs->ws.value.sig;
1395 target_terminal_ours (); /* Must do this before mourn anyway */
1397 /* Note: By definition of TARGET_WAITKIND_SIGNALLED, we shouldn't
1398 reach here unless the inferior is dead. However, for years
1399 target_kill() was called here, which hints that fatal signals aren't
1400 really fatal on some systems. If that's true, then some changes
1402 target_mourn_inferior ();
1404 print_stop_reason (SIGNAL_EXITED, stop_signal);
1405 singlestep_breakpoints_inserted_p = 0; /*SOFTWARE_SINGLE_STEP_P() */
1406 stop_stepping (ecs);
1409 /* The following are the only cases in which we keep going;
1410 the above cases end in a continue or goto. */
1411 case TARGET_WAITKIND_FORKED:
1412 case TARGET_WAITKIND_VFORKED:
1414 fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_FORKED\n");
1415 stop_signal = TARGET_SIGNAL_TRAP;
1416 pending_follow.kind = ecs->ws.kind;
1418 pending_follow.fork_event.parent_pid = PIDGET (ecs->ptid);
1419 pending_follow.fork_event.child_pid = ecs->ws.value.related_pid;
1421 if (!ptid_equal (ecs->ptid, inferior_ptid))
1423 context_switch (ecs);
1424 flush_cached_frames ();
1427 stop_pc = read_pc ();
1429 stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid, 0);
1431 ecs->random_signal = !bpstat_explains_signal (stop_bpstat);
1433 /* If no catchpoint triggered for this, then keep going. */
1434 if (ecs->random_signal)
1436 stop_signal = TARGET_SIGNAL_0;
1440 goto process_event_stop_test;
1442 case TARGET_WAITKIND_EXECD:
1444 fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_EXECD\n");
1445 stop_signal = TARGET_SIGNAL_TRAP;
1447 /* NOTE drow/2002-12-05: This code should be pushed down into the
1448 target_wait function. Until then following vfork on HP/UX 10.20
1449 is probably broken by this. Of course, it's broken anyway. */
1450 /* Is this a target which reports multiple exec events per actual
1451 call to exec()? (HP-UX using ptrace does, for example.) If so,
1452 ignore all but the last one. Just resume the exec'r, and wait
1453 for the next exec event. */
1454 if (inferior_ignoring_leading_exec_events)
1456 inferior_ignoring_leading_exec_events--;
1457 target_resume (ecs->ptid, 0, TARGET_SIGNAL_0);
1458 prepare_to_wait (ecs);
1461 inferior_ignoring_leading_exec_events =
1462 target_reported_exec_events_per_exec_call () - 1;
1464 pending_follow.execd_pathname =
1465 savestring (ecs->ws.value.execd_pathname,
1466 strlen (ecs->ws.value.execd_pathname));
1468 /* This causes the eventpoints and symbol table to be reset. Must
1469 do this now, before trying to determine whether to stop. */
1470 follow_exec (PIDGET (inferior_ptid), pending_follow.execd_pathname);
1471 xfree (pending_follow.execd_pathname);
1473 stop_pc = read_pc_pid (ecs->ptid);
1474 ecs->saved_inferior_ptid = inferior_ptid;
1475 inferior_ptid = ecs->ptid;
1477 stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid, 0);
1479 ecs->random_signal = !bpstat_explains_signal (stop_bpstat);
1480 inferior_ptid = ecs->saved_inferior_ptid;
1482 if (!ptid_equal (ecs->ptid, inferior_ptid))
1484 context_switch (ecs);
1485 flush_cached_frames ();
1488 /* If no catchpoint triggered for this, then keep going. */
1489 if (ecs->random_signal)
1491 stop_signal = TARGET_SIGNAL_0;
1495 goto process_event_stop_test;
1497 /* Be careful not to try to gather much state about a thread
1498 that's in a syscall. It's frequently a losing proposition. */
1499 case TARGET_WAITKIND_SYSCALL_ENTRY:
1501 fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SYSCALL_ENTRY\n");
1502 resume (0, TARGET_SIGNAL_0);
1503 prepare_to_wait (ecs);
1506 /* Before examining the threads further, step this thread to
1507 get it entirely out of the syscall. (We get notice of the
1508 event when the thread is just on the verge of exiting a
1509 syscall. Stepping one instruction seems to get it back
1511 case TARGET_WAITKIND_SYSCALL_RETURN:
1513 fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SYSCALL_RETURN\n");
1514 target_resume (ecs->ptid, 1, TARGET_SIGNAL_0);
1515 prepare_to_wait (ecs);
1518 case TARGET_WAITKIND_STOPPED:
1520 fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_STOPPED\n");
1521 stop_signal = ecs->ws.value.sig;
1524 /* We had an event in the inferior, but we are not interested
1525 in handling it at this level. The lower layers have already
1526 done what needs to be done, if anything.
1528 One of the possible circumstances for this is when the
1529 inferior produces output for the console. The inferior has
1530 not stopped, and we are ignoring the event. Another possible
1531 circumstance is any event which the lower level knows will be
1532 reported multiple times without an intervening resume. */
1533 case TARGET_WAITKIND_IGNORE:
1535 fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_IGNORE\n");
1536 prepare_to_wait (ecs);
1540 /* We may want to consider not doing a resume here in order to give
1541 the user a chance to play with the new thread. It might be good
1542 to make that a user-settable option. */
1544 /* At this point, all threads are stopped (happens automatically in
1545 either the OS or the native code). Therefore we need to continue
1546 all threads in order to make progress. */
1547 if (ecs->new_thread_event)
1549 target_resume (RESUME_ALL, 0, TARGET_SIGNAL_0);
1550 prepare_to_wait (ecs);
1554 stop_pc = read_pc_pid (ecs->ptid);
1557 fprintf_unfiltered (gdb_stdlog, "infrun: stop_pc = 0x%s\n", paddr_nz (stop_pc));
1559 if (stepping_past_singlestep_breakpoint)
1561 gdb_assert (SOFTWARE_SINGLE_STEP_P ()
1562 && singlestep_breakpoints_inserted_p);
1563 gdb_assert (ptid_equal (singlestep_ptid, ecs->ptid));
1564 gdb_assert (!ptid_equal (singlestep_ptid, saved_singlestep_ptid));
1566 stepping_past_singlestep_breakpoint = 0;
1568 /* We've either finished single-stepping past the single-step
1569 breakpoint, or stopped for some other reason. It would be nice if
1570 we could tell, but we can't reliably. */
1571 if (stop_signal == TARGET_SIGNAL_TRAP)
1574 fprintf_unfiltered (gdb_stdlog, "infrun: stepping_past_singlestep_breakpoint\n");
1575 /* Pull the single step breakpoints out of the target. */
1576 SOFTWARE_SINGLE_STEP (0, 0);
1577 singlestep_breakpoints_inserted_p = 0;
1579 ecs->random_signal = 0;
1581 ecs->ptid = saved_singlestep_ptid;
1582 context_switch (ecs);
1583 if (deprecated_context_hook)
1584 deprecated_context_hook (pid_to_thread_id (ecs->ptid));
1586 resume (1, TARGET_SIGNAL_0);
1587 prepare_to_wait (ecs);
1592 stepping_past_singlestep_breakpoint = 0;
1594 /* See if a thread hit a thread-specific breakpoint that was meant for
1595 another thread. If so, then step that thread past the breakpoint,
1598 if (stop_signal == TARGET_SIGNAL_TRAP)
1600 int thread_hop_needed = 0;
1602 /* Check if a regular breakpoint has been hit before checking
1603 for a potential single step breakpoint. Otherwise, GDB will
1604 not see this breakpoint hit when stepping onto breakpoints. */
1605 if (breakpoints_inserted && breakpoint_here_p (stop_pc))
1607 ecs->random_signal = 0;
1608 if (!breakpoint_thread_match (stop_pc, ecs->ptid))
1609 thread_hop_needed = 1;
1611 else if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
1613 ecs->random_signal = 0;
1614 /* The call to in_thread_list is necessary because PTIDs sometimes
1615 change when we go from single-threaded to multi-threaded. If
1616 the singlestep_ptid is still in the list, assume that it is
1617 really different from ecs->ptid. */
1618 if (!ptid_equal (singlestep_ptid, ecs->ptid)
1619 && in_thread_list (singlestep_ptid))
1621 thread_hop_needed = 1;
1622 stepping_past_singlestep_breakpoint = 1;
1623 saved_singlestep_ptid = singlestep_ptid;
1627 if (thread_hop_needed)
1632 fprintf_unfiltered (gdb_stdlog, "infrun: thread_hop_needed\n");
1634 /* Saw a breakpoint, but it was hit by the wrong thread.
1637 if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
1639 /* Pull the single step breakpoints out of the target. */
1640 SOFTWARE_SINGLE_STEP (0, 0);
1641 singlestep_breakpoints_inserted_p = 0;
1644 remove_status = remove_breakpoints ();
1645 /* Did we fail to remove breakpoints? If so, try
1646 to set the PC past the bp. (There's at least
1647 one situation in which we can fail to remove
1648 the bp's: On HP-UX's that use ttrace, we can't
1649 change the address space of a vforking child
1650 process until the child exits (well, okay, not
1651 then either :-) or execs. */
1652 if (remove_status != 0)
1654 /* FIXME! This is obviously non-portable! */
1655 write_pc_pid (stop_pc + 4, ecs->ptid);
1656 /* We need to restart all the threads now,
1657 * unles we're running in scheduler-locked mode.
1658 * Use currently_stepping to determine whether to
1661 /* FIXME MVS: is there any reason not to call resume()? */
1662 if (scheduler_mode == schedlock_on)
1663 target_resume (ecs->ptid,
1664 currently_stepping (ecs), TARGET_SIGNAL_0);
1666 target_resume (RESUME_ALL,
1667 currently_stepping (ecs), TARGET_SIGNAL_0);
1668 prepare_to_wait (ecs);
1673 breakpoints_inserted = 0;
1674 if (!ptid_equal (inferior_ptid, ecs->ptid))
1675 context_switch (ecs);
1676 ecs->waiton_ptid = ecs->ptid;
1677 ecs->wp = &(ecs->ws);
1678 ecs->another_trap = 1;
1680 ecs->infwait_state = infwait_thread_hop_state;
1682 registers_changed ();
1686 else if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
1688 sw_single_step_trap_p = 1;
1689 ecs->random_signal = 0;
1693 ecs->random_signal = 1;
1695 /* See if something interesting happened to the non-current thread. If
1696 so, then switch to that thread. */
1697 if (!ptid_equal (ecs->ptid, inferior_ptid))
1700 fprintf_unfiltered (gdb_stdlog, "infrun: context switch\n");
1702 context_switch (ecs);
1704 if (deprecated_context_hook)
1705 deprecated_context_hook (pid_to_thread_id (ecs->ptid));
1707 flush_cached_frames ();
1710 if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
1712 /* Pull the single step breakpoints out of the target. */
1713 SOFTWARE_SINGLE_STEP (0, 0);
1714 singlestep_breakpoints_inserted_p = 0;
1717 /* It may not be necessary to disable the watchpoint to stop over
1718 it. For example, the PA can (with some kernel cooperation)
1719 single step over a watchpoint without disabling the watchpoint. */
1720 if (HAVE_STEPPABLE_WATCHPOINT && STOPPED_BY_WATCHPOINT (ecs->ws))
1723 fprintf_unfiltered (gdb_stdlog, "infrun: STOPPED_BY_WATCHPOINT\n");
1725 prepare_to_wait (ecs);
1729 /* It is far more common to need to disable a watchpoint to step
1730 the inferior over it. FIXME. What else might a debug
1731 register or page protection watchpoint scheme need here? */
1732 if (HAVE_NONSTEPPABLE_WATCHPOINT && STOPPED_BY_WATCHPOINT (ecs->ws))
1734 /* At this point, we are stopped at an instruction which has
1735 attempted to write to a piece of memory under control of
1736 a watchpoint. The instruction hasn't actually executed
1737 yet. If we were to evaluate the watchpoint expression
1738 now, we would get the old value, and therefore no change
1739 would seem to have occurred.
1741 In order to make watchpoints work `right', we really need
1742 to complete the memory write, and then evaluate the
1743 watchpoint expression. The following code does that by
1744 removing the watchpoint (actually, all watchpoints and
1745 breakpoints), single-stepping the target, re-inserting
1746 watchpoints, and then falling through to let normal
1747 single-step processing handle proceed. Since this
1748 includes evaluating watchpoints, things will come to a
1749 stop in the correct manner. */
1752 fprintf_unfiltered (gdb_stdlog, "infrun: STOPPED_BY_WATCHPOINT\n");
1753 remove_breakpoints ();
1754 registers_changed ();
1755 target_resume (ecs->ptid, 1, TARGET_SIGNAL_0); /* Single step */
1757 ecs->waiton_ptid = ecs->ptid;
1758 ecs->wp = &(ecs->ws);
1759 ecs->infwait_state = infwait_nonstep_watch_state;
1760 prepare_to_wait (ecs);
1764 /* It may be possible to simply continue after a watchpoint. */
1765 if (HAVE_CONTINUABLE_WATCHPOINT)
1766 stopped_by_watchpoint = STOPPED_BY_WATCHPOINT (ecs->ws);
1768 ecs->stop_func_start = 0;
1769 ecs->stop_func_end = 0;
1770 ecs->stop_func_name = 0;
1771 /* Don't care about return value; stop_func_start and stop_func_name
1772 will both be 0 if it doesn't work. */
1773 find_pc_partial_function (stop_pc, &ecs->stop_func_name,
1774 &ecs->stop_func_start, &ecs->stop_func_end);
1775 ecs->stop_func_start += DEPRECATED_FUNCTION_START_OFFSET;
1776 ecs->another_trap = 0;
1777 bpstat_clear (&stop_bpstat);
1779 stop_stack_dummy = 0;
1780 stop_print_frame = 1;
1781 ecs->random_signal = 0;
1782 stopped_by_random_signal = 0;
1783 breakpoints_failed = 0;
1785 if (stop_signal == TARGET_SIGNAL_TRAP
1787 && gdbarch_single_step_through_delay_p (current_gdbarch)
1788 && currently_stepping (ecs))
1790 /* We're trying to step of a breakpoint. Turns out that we're
1791 also on an instruction that needs to be stepped multiple
1792 times before it's been fully executing. E.g., architectures
1793 with a delay slot. It needs to be stepped twice, once for
1794 the instruction and once for the delay slot. */
1795 int step_through_delay
1796 = gdbarch_single_step_through_delay (current_gdbarch,
1797 get_current_frame ());
1798 if (debug_infrun && step_through_delay)
1799 fprintf_unfiltered (gdb_stdlog, "infrun: step through delay\n");
1800 if (step_range_end == 0 && step_through_delay)
1802 /* The user issued a continue when stopped at a breakpoint.
1803 Set up for another trap and get out of here. */
1804 ecs->another_trap = 1;
1808 else if (step_through_delay)
1810 /* The user issued a step when stopped at a breakpoint.
1811 Maybe we should stop, maybe we should not - the delay
1812 slot *might* correspond to a line of source. In any
1813 case, don't decide that here, just set ecs->another_trap,
1814 making sure we single-step again before breakpoints are
1816 ecs->another_trap = 1;
1820 /* Look at the cause of the stop, and decide what to do.
1821 The alternatives are:
1822 1) break; to really stop and return to the debugger,
1823 2) drop through to start up again
1824 (set ecs->another_trap to 1 to single step once)
1825 3) set ecs->random_signal to 1, and the decision between 1 and 2
1826 will be made according to the signal handling tables. */
1828 /* First, distinguish signals caused by the debugger from signals
1829 that have to do with the program's own actions. Note that
1830 breakpoint insns may cause SIGTRAP or SIGILL or SIGEMT, depending
1831 on the operating system version. Here we detect when a SIGILL or
1832 SIGEMT is really a breakpoint and change it to SIGTRAP. We do
1833 something similar for SIGSEGV, since a SIGSEGV will be generated
1834 when we're trying to execute a breakpoint instruction on a
1835 non-executable stack. This happens for call dummy breakpoints
1836 for architectures like SPARC that place call dummies on the
1839 if (stop_signal == TARGET_SIGNAL_TRAP
1840 || (breakpoints_inserted
1841 && (stop_signal == TARGET_SIGNAL_ILL
1842 || stop_signal == TARGET_SIGNAL_SEGV
1843 || stop_signal == TARGET_SIGNAL_EMT))
1844 || stop_soon == STOP_QUIETLY || stop_soon == STOP_QUIETLY_NO_SIGSTOP)
1846 if (stop_signal == TARGET_SIGNAL_TRAP && stop_after_trap)
1849 fprintf_unfiltered (gdb_stdlog, "infrun: stopped\n");
1850 stop_print_frame = 0;
1851 stop_stepping (ecs);
1855 /* This is originated from start_remote(), start_inferior() and
1856 shared libraries hook functions. */
1857 if (stop_soon == STOP_QUIETLY)
1860 fprintf_unfiltered (gdb_stdlog, "infrun: quietly stopped\n");
1861 stop_stepping (ecs);
1865 /* This originates from attach_command(). We need to overwrite
1866 the stop_signal here, because some kernels don't ignore a
1867 SIGSTOP in a subsequent ptrace(PTRACE_SONT,SOGSTOP) call.
1868 See more comments in inferior.h. */
1869 if (stop_soon == STOP_QUIETLY_NO_SIGSTOP)
1871 stop_stepping (ecs);
1872 if (stop_signal == TARGET_SIGNAL_STOP)
1873 stop_signal = TARGET_SIGNAL_0;
1877 /* Don't even think about breakpoints if just proceeded over a
1879 if (stop_signal == TARGET_SIGNAL_TRAP && trap_expected)
1882 fprintf_unfiltered (gdb_stdlog, "infrun: trap expected\n");
1883 bpstat_clear (&stop_bpstat);
1887 /* See if there is a breakpoint at the current PC. */
1888 stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid,
1889 stopped_by_watchpoint);
1891 /* Following in case break condition called a
1893 stop_print_frame = 1;
1896 /* NOTE: cagney/2003-03-29: These two checks for a random signal
1897 at one stage in the past included checks for an inferior
1898 function call's call dummy's return breakpoint. The original
1899 comment, that went with the test, read:
1901 ``End of a stack dummy. Some systems (e.g. Sony news) give
1902 another signal besides SIGTRAP, so check here as well as
1905 If someone ever tries to get get call dummys on a
1906 non-executable stack to work (where the target would stop
1907 with something like a SIGSEGV), then those tests might need
1908 to be re-instated. Given, however, that the tests were only
1909 enabled when momentary breakpoints were not being used, I
1910 suspect that it won't be the case.
1912 NOTE: kettenis/2004-02-05: Indeed such checks don't seem to
1913 be necessary for call dummies on a non-executable stack on
1916 if (stop_signal == TARGET_SIGNAL_TRAP)
1918 = !(bpstat_explains_signal (stop_bpstat)
1920 || (step_range_end && step_resume_breakpoint == NULL));
1923 ecs->random_signal = !bpstat_explains_signal (stop_bpstat);
1924 if (!ecs->random_signal)
1925 stop_signal = TARGET_SIGNAL_TRAP;
1929 /* When we reach this point, we've pretty much decided
1930 that the reason for stopping must've been a random
1931 (unexpected) signal. */
1934 ecs->random_signal = 1;
1936 process_event_stop_test:
1937 /* For the program's own signals, act according to
1938 the signal handling tables. */
1940 if (ecs->random_signal)
1942 /* Signal not for debugging purposes. */
1946 fprintf_unfiltered (gdb_stdlog, "infrun: random signal %d\n", stop_signal);
1948 stopped_by_random_signal = 1;
1950 if (signal_print[stop_signal])
1953 target_terminal_ours_for_output ();
1954 print_stop_reason (SIGNAL_RECEIVED, stop_signal);
1956 if (signal_stop[stop_signal])
1958 stop_stepping (ecs);
1961 /* If not going to stop, give terminal back
1962 if we took it away. */
1964 target_terminal_inferior ();
1966 /* Clear the signal if it should not be passed. */
1967 if (signal_program[stop_signal] == 0)
1968 stop_signal = TARGET_SIGNAL_0;
1970 if (prev_pc == read_pc ()
1971 && !breakpoints_inserted
1972 && breakpoint_here_p (read_pc ())
1973 && step_resume_breakpoint == NULL)
1975 /* We were just starting a new sequence, attempting to
1976 single-step off of a breakpoint and expecting a SIGTRAP.
1977 Intead this signal arrives. This signal will take us out
1978 of the stepping range so GDB needs to remember to, when
1979 the signal handler returns, resume stepping off that
1981 /* To simplify things, "continue" is forced to use the same
1982 code paths as single-step - set a breakpoint at the
1983 signal return address and then, once hit, step off that
1985 insert_step_resume_breakpoint_at_frame (get_current_frame ());
1986 ecs->step_after_step_resume_breakpoint = 1;
1991 if (step_range_end != 0
1992 && stop_signal != TARGET_SIGNAL_0
1993 && stop_pc >= step_range_start && stop_pc < step_range_end
1994 && frame_id_eq (get_frame_id (get_current_frame ()),
1996 && step_resume_breakpoint == NULL)
1998 /* The inferior is about to take a signal that will take it
1999 out of the single step range. Set a breakpoint at the
2000 current PC (which is presumably where the signal handler
2001 will eventually return) and then allow the inferior to
2004 Note that this is only needed for a signal delivered
2005 while in the single-step range. Nested signals aren't a
2006 problem as they eventually all return. */
2007 insert_step_resume_breakpoint_at_frame (get_current_frame ());
2012 /* Note: step_resume_breakpoint may be non-NULL. This occures
2013 when either there's a nested signal, or when there's a
2014 pending signal enabled just as the signal handler returns
2015 (leaving the inferior at the step-resume-breakpoint without
2016 actually executing it). Either way continue until the
2017 breakpoint is really hit. */
2022 /* Handle cases caused by hitting a breakpoint. */
2024 CORE_ADDR jmp_buf_pc;
2025 struct bpstat_what what;
2027 what = bpstat_what (stop_bpstat);
2029 if (what.call_dummy)
2031 stop_stack_dummy = 1;
2034 switch (what.main_action)
2036 case BPSTAT_WHAT_SET_LONGJMP_RESUME:
2037 /* If we hit the breakpoint at longjmp, disable it for the
2038 duration of this command. Then, install a temporary
2039 breakpoint at the target of the jmp_buf. */
2041 fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME\n");
2042 disable_longjmp_breakpoint ();
2043 remove_breakpoints ();
2044 breakpoints_inserted = 0;
2045 if (!GET_LONGJMP_TARGET_P () || !GET_LONGJMP_TARGET (&jmp_buf_pc))
2051 /* Need to blow away step-resume breakpoint, as it
2052 interferes with us */
2053 if (step_resume_breakpoint != NULL)
2055 delete_step_resume_breakpoint (&step_resume_breakpoint);
2058 set_longjmp_resume_breakpoint (jmp_buf_pc, null_frame_id);
2059 ecs->handling_longjmp = 1; /* FIXME */
2063 case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME:
2064 case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE:
2066 fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_CLEAR_LONGJMP_RESUME\n");
2067 remove_breakpoints ();
2068 breakpoints_inserted = 0;
2069 disable_longjmp_breakpoint ();
2070 ecs->handling_longjmp = 0; /* FIXME */
2071 if (what.main_action == BPSTAT_WHAT_CLEAR_LONGJMP_RESUME)
2073 /* else fallthrough */
2075 case BPSTAT_WHAT_SINGLE:
2077 fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_SINGLE\n");
2078 if (breakpoints_inserted)
2080 remove_breakpoints ();
2082 breakpoints_inserted = 0;
2083 ecs->another_trap = 1;
2084 /* Still need to check other stuff, at least the case
2085 where we are stepping and step out of the right range. */
2088 case BPSTAT_WHAT_STOP_NOISY:
2090 fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_NOISY\n");
2091 stop_print_frame = 1;
2093 /* We are about to nuke the step_resume_breakpointt via the
2094 cleanup chain, so no need to worry about it here. */
2096 stop_stepping (ecs);
2099 case BPSTAT_WHAT_STOP_SILENT:
2101 fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_SILENT\n");
2102 stop_print_frame = 0;
2104 /* We are about to nuke the step_resume_breakpoin via the
2105 cleanup chain, so no need to worry about it here. */
2107 stop_stepping (ecs);
2110 case BPSTAT_WHAT_STEP_RESUME:
2111 /* This proably demands a more elegant solution, but, yeah
2114 This function's use of the simple variable
2115 step_resume_breakpoint doesn't seem to accomodate
2116 simultaneously active step-resume bp's, although the
2117 breakpoint list certainly can.
2119 If we reach here and step_resume_breakpoint is already
2120 NULL, then apparently we have multiple active
2121 step-resume bp's. We'll just delete the breakpoint we
2122 stopped at, and carry on.
2124 Correction: what the code currently does is delete a
2125 step-resume bp, but it makes no effort to ensure that
2126 the one deleted is the one currently stopped at. MVS */
2129 fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STEP_RESUME\n");
2131 if (step_resume_breakpoint == NULL)
2133 step_resume_breakpoint =
2134 bpstat_find_step_resume_breakpoint (stop_bpstat);
2136 delete_step_resume_breakpoint (&step_resume_breakpoint);
2137 if (ecs->step_after_step_resume_breakpoint)
2139 /* Back when the step-resume breakpoint was inserted, we
2140 were trying to single-step off a breakpoint. Go back
2142 ecs->step_after_step_resume_breakpoint = 0;
2143 remove_breakpoints ();
2144 breakpoints_inserted = 0;
2145 ecs->another_trap = 1;
2151 case BPSTAT_WHAT_THROUGH_SIGTRAMP:
2153 fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_THROUGH_SIGTRAMP\n");
2154 /* If were waiting for a trap, hitting the step_resume_break
2155 doesn't count as getting it. */
2157 ecs->another_trap = 1;
2160 case BPSTAT_WHAT_CHECK_SHLIBS:
2161 case BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK:
2164 fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_CHECK_SHLIBS\n");
2165 /* Remove breakpoints, we eventually want to step over the
2166 shlib event breakpoint, and SOLIB_ADD might adjust
2167 breakpoint addresses via breakpoint_re_set. */
2168 if (breakpoints_inserted)
2169 remove_breakpoints ();
2170 breakpoints_inserted = 0;
2172 /* Check for any newly added shared libraries if we're
2173 supposed to be adding them automatically. Switch
2174 terminal for any messages produced by
2175 breakpoint_re_set. */
2176 target_terminal_ours_for_output ();
2177 /* NOTE: cagney/2003-11-25: Make certain that the target
2178 stack's section table is kept up-to-date. Architectures,
2179 (e.g., PPC64), use the section table to perform
2180 operations such as address => section name and hence
2181 require the table to contain all sections (including
2182 those found in shared libraries). */
2183 /* NOTE: cagney/2003-11-25: Pass current_target and not
2184 exec_ops to SOLIB_ADD. This is because current GDB is
2185 only tooled to propagate section_table changes out from
2186 the "current_target" (see target_resize_to_sections), and
2187 not up from the exec stratum. This, of course, isn't
2188 right. "infrun.c" should only interact with the
2189 exec/process stratum, instead relying on the target stack
2190 to propagate relevant changes (stop, section table
2191 changed, ...) up to other layers. */
2193 SOLIB_ADD (NULL, 0, ¤t_target, auto_solib_add);
2195 solib_add (NULL, 0, ¤t_target, auto_solib_add);
2197 target_terminal_inferior ();
2199 /* Try to reenable shared library breakpoints, additional
2200 code segments in shared libraries might be mapped in now. */
2201 re_enable_breakpoints_in_shlibs ();
2203 /* If requested, stop when the dynamic linker notifies
2204 gdb of events. This allows the user to get control
2205 and place breakpoints in initializer routines for
2206 dynamically loaded objects (among other things). */
2207 if (stop_on_solib_events || stop_stack_dummy)
2209 stop_stepping (ecs);
2213 /* If we stopped due to an explicit catchpoint, then the
2214 (see above) call to SOLIB_ADD pulled in any symbols
2215 from a newly-loaded library, if appropriate.
2217 We do want the inferior to stop, but not where it is
2218 now, which is in the dynamic linker callback. Rather,
2219 we would like it stop in the user's program, just after
2220 the call that caused this catchpoint to trigger. That
2221 gives the user a more useful vantage from which to
2222 examine their program's state. */
2223 else if (what.main_action
2224 == BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK)
2226 /* ??rehrauer: If I could figure out how to get the
2227 right return PC from here, we could just set a temp
2228 breakpoint and resume. I'm not sure we can without
2229 cracking open the dld's shared libraries and sniffing
2230 their unwind tables and text/data ranges, and that's
2231 not a terribly portable notion.
2233 Until that time, we must step the inferior out of the
2234 dld callback, and also out of the dld itself (and any
2235 code or stubs in libdld.sl, such as "shl_load" and
2236 friends) until we reach non-dld code. At that point,
2237 we can stop stepping. */
2238 bpstat_get_triggered_catchpoints (stop_bpstat,
2240 stepping_through_solib_catchpoints);
2241 ecs->stepping_through_solib_after_catch = 1;
2243 /* Be sure to lift all breakpoints, so the inferior does
2244 actually step past this point... */
2245 ecs->another_trap = 1;
2250 /* We want to step over this breakpoint, then keep going. */
2251 ecs->another_trap = 1;
2257 case BPSTAT_WHAT_LAST:
2258 /* Not a real code, but listed here to shut up gcc -Wall. */
2260 case BPSTAT_WHAT_KEEP_CHECKING:
2265 /* We come here if we hit a breakpoint but should not
2266 stop for it. Possibly we also were stepping
2267 and should stop for that. So fall through and
2268 test for stepping. But, if not stepping,
2271 /* Are we stepping to get the inferior out of the dynamic linker's
2272 hook (and possibly the dld itself) after catching a shlib
2274 if (ecs->stepping_through_solib_after_catch)
2276 #if defined(SOLIB_ADD)
2277 /* Have we reached our destination? If not, keep going. */
2278 if (SOLIB_IN_DYNAMIC_LINKER (PIDGET (ecs->ptid), stop_pc))
2281 fprintf_unfiltered (gdb_stdlog, "infrun: stepping in dynamic linker\n");
2282 ecs->another_trap = 1;
2288 fprintf_unfiltered (gdb_stdlog, "infrun: step past dynamic linker\n");
2289 /* Else, stop and report the catchpoint(s) whose triggering
2290 caused us to begin stepping. */
2291 ecs->stepping_through_solib_after_catch = 0;
2292 bpstat_clear (&stop_bpstat);
2293 stop_bpstat = bpstat_copy (ecs->stepping_through_solib_catchpoints);
2294 bpstat_clear (&ecs->stepping_through_solib_catchpoints);
2295 stop_print_frame = 1;
2296 stop_stepping (ecs);
2300 if (step_resume_breakpoint)
2303 fprintf_unfiltered (gdb_stdlog, "infrun: step-resume breakpoint\n");
2305 /* Having a step-resume breakpoint overrides anything
2306 else having to do with stepping commands until
2307 that breakpoint is reached. */
2312 if (step_range_end == 0)
2315 fprintf_unfiltered (gdb_stdlog, "infrun: no stepping, continue\n");
2316 /* Likewise if we aren't even stepping. */
2321 /* If stepping through a line, keep going if still within it.
2323 Note that step_range_end is the address of the first instruction
2324 beyond the step range, and NOT the address of the last instruction
2326 if (stop_pc >= step_range_start && stop_pc < step_range_end)
2329 fprintf_unfiltered (gdb_stdlog, "infrun: stepping inside range [0x%s-0x%s]\n",
2330 paddr_nz (step_range_start),
2331 paddr_nz (step_range_end));
2336 /* We stepped out of the stepping range. */
2338 /* If we are stepping at the source level and entered the runtime
2339 loader dynamic symbol resolution code, we keep on single stepping
2340 until we exit the run time loader code and reach the callee's
2342 if (step_over_calls == STEP_OVER_UNDEBUGGABLE
2343 #ifdef IN_SOLIB_DYNSYM_RESOLVE_CODE
2344 && IN_SOLIB_DYNSYM_RESOLVE_CODE (stop_pc)
2346 && in_solib_dynsym_resolve_code (stop_pc)
2350 CORE_ADDR pc_after_resolver =
2351 gdbarch_skip_solib_resolver (current_gdbarch, stop_pc);
2354 fprintf_unfiltered (gdb_stdlog, "infrun: stepped into dynsym resolve code\n");
2356 if (pc_after_resolver)
2358 /* Set up a step-resume breakpoint at the address
2359 indicated by SKIP_SOLIB_RESOLVER. */
2360 struct symtab_and_line sr_sal;
2362 sr_sal.pc = pc_after_resolver;
2364 insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
2371 if (step_range_end != 1
2372 && (step_over_calls == STEP_OVER_UNDEBUGGABLE
2373 || step_over_calls == STEP_OVER_ALL)
2374 && get_frame_type (get_current_frame ()) == SIGTRAMP_FRAME)
2377 fprintf_unfiltered (gdb_stdlog, "infrun: stepped into signal trampoline\n");
2378 /* The inferior, while doing a "step" or "next", has ended up in
2379 a signal trampoline (either by a signal being delivered or by
2380 the signal handler returning). Just single-step until the
2381 inferior leaves the trampoline (either by calling the handler
2387 /* Check for subroutine calls. The check for the current frame
2388 equalling the step ID is not necessary - the check of the
2389 previous frame's ID is sufficient - but it is a common case and
2390 cheaper than checking the previous frame's ID.
2392 NOTE: frame_id_eq will never report two invalid frame IDs as
2393 being equal, so to get into this block, both the current and
2394 previous frame must have valid frame IDs. */
2395 if (!frame_id_eq (get_frame_id (get_current_frame ()), step_frame_id)
2396 && frame_id_eq (frame_unwind_id (get_current_frame ()), step_frame_id))
2398 CORE_ADDR real_stop_pc;
2401 fprintf_unfiltered (gdb_stdlog, "infrun: stepped into subroutine\n");
2403 if ((step_over_calls == STEP_OVER_NONE)
2404 || ((step_range_end == 1)
2405 && in_prologue (prev_pc, ecs->stop_func_start)))
2407 /* I presume that step_over_calls is only 0 when we're
2408 supposed to be stepping at the assembly language level
2409 ("stepi"). Just stop. */
2410 /* Also, maybe we just did a "nexti" inside a prolog, so we
2411 thought it was a subroutine call but it was not. Stop as
2414 print_stop_reason (END_STEPPING_RANGE, 0);
2415 stop_stepping (ecs);
2419 if (step_over_calls == STEP_OVER_ALL)
2421 /* We're doing a "next", set a breakpoint at callee's return
2422 address (the address at which the caller will
2424 insert_step_resume_breakpoint_at_caller (get_current_frame ());
2429 /* If we are in a function call trampoline (a stub between the
2430 calling routine and the real function), locate the real
2431 function. That's what tells us (a) whether we want to step
2432 into it at all, and (b) what prologue we want to run to the
2433 end of, if we do step into it. */
2434 real_stop_pc = skip_language_trampoline (stop_pc);
2435 if (real_stop_pc == 0)
2436 real_stop_pc = SKIP_TRAMPOLINE_CODE (stop_pc);
2437 if (real_stop_pc != 0)
2438 ecs->stop_func_start = real_stop_pc;
2441 #ifdef IN_SOLIB_DYNSYM_RESOLVE_CODE
2442 IN_SOLIB_DYNSYM_RESOLVE_CODE (ecs->stop_func_start)
2444 in_solib_dynsym_resolve_code (ecs->stop_func_start)
2448 struct symtab_and_line sr_sal;
2450 sr_sal.pc = ecs->stop_func_start;
2452 insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
2457 /* If we have line number information for the function we are
2458 thinking of stepping into, step into it.
2460 If there are several symtabs at that PC (e.g. with include
2461 files), just want to know whether *any* of them have line
2462 numbers. find_pc_line handles this. */
2464 struct symtab_and_line tmp_sal;
2466 tmp_sal = find_pc_line (ecs->stop_func_start, 0);
2467 if (tmp_sal.line != 0)
2469 step_into_function (ecs);
2474 /* If we have no line number and the step-stop-if-no-debug is
2475 set, we stop the step so that the user has a chance to switch
2476 in assembly mode. */
2477 if (step_over_calls == STEP_OVER_UNDEBUGGABLE && step_stop_if_no_debug)
2480 print_stop_reason (END_STEPPING_RANGE, 0);
2481 stop_stepping (ecs);
2485 /* Set a breakpoint at callee's return address (the address at
2486 which the caller will resume). */
2487 insert_step_resume_breakpoint_at_caller (get_current_frame ());
2492 /* If we're in the return path from a shared library trampoline,
2493 we want to proceed through the trampoline when stepping. */
2494 if (IN_SOLIB_RETURN_TRAMPOLINE (stop_pc, ecs->stop_func_name))
2496 /* Determine where this trampoline returns. */
2497 CORE_ADDR real_stop_pc = SKIP_TRAMPOLINE_CODE (stop_pc);
2500 fprintf_unfiltered (gdb_stdlog, "infrun: stepped into solib return tramp\n");
2502 /* Only proceed through if we know where it's going. */
2505 /* And put the step-breakpoint there and go until there. */
2506 struct symtab_and_line sr_sal;
2508 init_sal (&sr_sal); /* initialize to zeroes */
2509 sr_sal.pc = real_stop_pc;
2510 sr_sal.section = find_pc_overlay (sr_sal.pc);
2512 /* Do not specify what the fp should be when we stop since
2513 on some machines the prologue is where the new fp value
2515 insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
2517 /* Restart without fiddling with the step ranges or
2524 ecs->sal = find_pc_line (stop_pc, 0);
2526 /* NOTE: tausq/2004-05-24: This if block used to be done before all
2527 the trampoline processing logic, however, there are some trampolines
2528 that have no names, so we should do trampoline handling first. */
2529 if (step_over_calls == STEP_OVER_UNDEBUGGABLE
2530 && ecs->stop_func_name == NULL
2531 && ecs->sal.line == 0)
2534 fprintf_unfiltered (gdb_stdlog, "infrun: stepped into undebuggable function\n");
2536 /* The inferior just stepped into, or returned to, an
2537 undebuggable function (where there is no debugging information
2538 and no line number corresponding to the address where the
2539 inferior stopped). Since we want to skip this kind of code,
2540 we keep going until the inferior returns from this
2541 function - unless the user has asked us not to (via
2542 set step-mode) or we no longer know how to get back
2543 to the call site. */
2544 if (step_stop_if_no_debug
2545 || !frame_id_p (frame_unwind_id (get_current_frame ())))
2547 /* If we have no line number and the step-stop-if-no-debug
2548 is set, we stop the step so that the user has a chance to
2549 switch in assembly mode. */
2551 print_stop_reason (END_STEPPING_RANGE, 0);
2552 stop_stepping (ecs);
2557 /* Set a breakpoint at callee's return address (the address
2558 at which the caller will resume). */
2559 insert_step_resume_breakpoint_at_caller (get_current_frame ());
2565 if (step_range_end == 1)
2567 /* It is stepi or nexti. We always want to stop stepping after
2570 fprintf_unfiltered (gdb_stdlog, "infrun: stepi/nexti\n");
2572 print_stop_reason (END_STEPPING_RANGE, 0);
2573 stop_stepping (ecs);
2577 if (ecs->sal.line == 0)
2579 /* We have no line number information. That means to stop
2580 stepping (does this always happen right after one instruction,
2581 when we do "s" in a function with no line numbers,
2582 or can this happen as a result of a return or longjmp?). */
2584 fprintf_unfiltered (gdb_stdlog, "infrun: no line number info\n");
2586 print_stop_reason (END_STEPPING_RANGE, 0);
2587 stop_stepping (ecs);
2591 if ((stop_pc == ecs->sal.pc)
2592 && (ecs->current_line != ecs->sal.line
2593 || ecs->current_symtab != ecs->sal.symtab))
2595 /* We are at the start of a different line. So stop. Note that
2596 we don't stop if we step into the middle of a different line.
2597 That is said to make things like for (;;) statements work
2600 fprintf_unfiltered (gdb_stdlog, "infrun: stepped to a different line\n");
2602 print_stop_reason (END_STEPPING_RANGE, 0);
2603 stop_stepping (ecs);
2607 /* We aren't done stepping.
2609 Optimize by setting the stepping range to the line.
2610 (We might not be in the original line, but if we entered a
2611 new line in mid-statement, we continue stepping. This makes
2612 things like for(;;) statements work better.) */
2614 if (ecs->stop_func_end && ecs->sal.end >= ecs->stop_func_end)
2616 /* If this is the last line of the function, don't keep stepping
2617 (it would probably step us out of the function).
2618 This is particularly necessary for a one-line function,
2619 in which after skipping the prologue we better stop even though
2620 we will be in mid-line. */
2622 fprintf_unfiltered (gdb_stdlog, "infrun: stepped to a different function\n");
2624 print_stop_reason (END_STEPPING_RANGE, 0);
2625 stop_stepping (ecs);
2628 step_range_start = ecs->sal.pc;
2629 step_range_end = ecs->sal.end;
2630 step_frame_id = get_frame_id (get_current_frame ());
2631 ecs->current_line = ecs->sal.line;
2632 ecs->current_symtab = ecs->sal.symtab;
2634 /* In the case where we just stepped out of a function into the
2635 middle of a line of the caller, continue stepping, but
2636 step_frame_id must be modified to current frame */
2638 /* NOTE: cagney/2003-10-16: I think this frame ID inner test is too
2639 generous. It will trigger on things like a step into a frameless
2640 stackless leaf function. I think the logic should instead look
2641 at the unwound frame ID has that should give a more robust
2642 indication of what happened. */
2643 if (step - ID == current - ID)
2644 still stepping in same function;
2645 else if (step - ID == unwind (current - ID))
2646 stepped into a function;
2648 stepped out of a function;
2649 /* Of course this assumes that the frame ID unwind code is robust
2650 and we're willing to introduce frame unwind logic into this
2651 function. Fortunately, those days are nearly upon us. */
2654 struct frame_id current_frame = get_frame_id (get_current_frame ());
2655 if (!(frame_id_inner (current_frame, step_frame_id)))
2656 step_frame_id = current_frame;
2660 fprintf_unfiltered (gdb_stdlog, "infrun: keep going\n");
2664 /* Are we in the middle of stepping? */
2667 currently_stepping (struct execution_control_state *ecs)
2669 return ((!ecs->handling_longjmp
2670 && ((step_range_end && step_resume_breakpoint == NULL)
2672 || ecs->stepping_through_solib_after_catch
2673 || bpstat_should_step ());
2676 /* Subroutine call with source code we should not step over. Do step
2677 to the first line of code in it. */
2680 step_into_function (struct execution_control_state *ecs)
2683 struct symtab_and_line sr_sal;
2685 s = find_pc_symtab (stop_pc);
2686 if (s && s->language != language_asm)
2687 ecs->stop_func_start = SKIP_PROLOGUE (ecs->stop_func_start);
2689 ecs->sal = find_pc_line (ecs->stop_func_start, 0);
2690 /* Use the step_resume_break to step until the end of the prologue,
2691 even if that involves jumps (as it seems to on the vax under
2693 /* If the prologue ends in the middle of a source line, continue to
2694 the end of that source line (if it is still within the function).
2695 Otherwise, just go to end of prologue. */
2697 && ecs->sal.pc != ecs->stop_func_start
2698 && ecs->sal.end < ecs->stop_func_end)
2699 ecs->stop_func_start = ecs->sal.end;
2701 /* Architectures which require breakpoint adjustment might not be able
2702 to place a breakpoint at the computed address. If so, the test
2703 ``ecs->stop_func_start == stop_pc'' will never succeed. Adjust
2704 ecs->stop_func_start to an address at which a breakpoint may be
2705 legitimately placed.
2707 Note: kevinb/2004-01-19: On FR-V, if this adjustment is not
2708 made, GDB will enter an infinite loop when stepping through
2709 optimized code consisting of VLIW instructions which contain
2710 subinstructions corresponding to different source lines. On
2711 FR-V, it's not permitted to place a breakpoint on any but the
2712 first subinstruction of a VLIW instruction. When a breakpoint is
2713 set, GDB will adjust the breakpoint address to the beginning of
2714 the VLIW instruction. Thus, we need to make the corresponding
2715 adjustment here when computing the stop address. */
2717 if (gdbarch_adjust_breakpoint_address_p (current_gdbarch))
2719 ecs->stop_func_start
2720 = gdbarch_adjust_breakpoint_address (current_gdbarch,
2721 ecs->stop_func_start);
2724 if (ecs->stop_func_start == stop_pc)
2726 /* We are already there: stop now. */
2728 print_stop_reason (END_STEPPING_RANGE, 0);
2729 stop_stepping (ecs);
2734 /* Put the step-breakpoint there and go until there. */
2735 init_sal (&sr_sal); /* initialize to zeroes */
2736 sr_sal.pc = ecs->stop_func_start;
2737 sr_sal.section = find_pc_overlay (ecs->stop_func_start);
2739 /* Do not specify what the fp should be when we stop since on
2740 some machines the prologue is where the new fp value is
2742 insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
2744 /* And make sure stepping stops right away then. */
2745 step_range_end = step_range_start;
2750 /* Insert a "step resume breakpoint" at SR_SAL with frame ID SR_ID.
2751 This is used to both functions and to skip over code. */
2754 insert_step_resume_breakpoint_at_sal (struct symtab_and_line sr_sal,
2755 struct frame_id sr_id)
2757 /* There should never be more than one step-resume breakpoint per
2758 thread, so we should never be setting a new
2759 step_resume_breakpoint when one is already active. */
2760 gdb_assert (step_resume_breakpoint == NULL);
2761 step_resume_breakpoint = set_momentary_breakpoint (sr_sal, sr_id,
2763 if (breakpoints_inserted)
2764 insert_breakpoints ();
2767 /* Insert a "step resume breakpoint" at RETURN_FRAME.pc. This is used
2768 to skip a potential signal handler.
2770 This is called with the interrupted function's frame. The signal
2771 handler, when it returns, will resume the interrupted function at
2775 insert_step_resume_breakpoint_at_frame (struct frame_info *return_frame)
2777 struct symtab_and_line sr_sal;
2779 init_sal (&sr_sal); /* initialize to zeros */
2781 sr_sal.pc = ADDR_BITS_REMOVE (get_frame_pc (return_frame));
2782 sr_sal.section = find_pc_overlay (sr_sal.pc);
2784 insert_step_resume_breakpoint_at_sal (sr_sal, get_frame_id (return_frame));
2787 /* Similar to insert_step_resume_breakpoint_at_frame, except
2788 but a breakpoint at the previous frame's PC. This is used to
2789 skip a function after stepping into it (for "next" or if the called
2790 function has no debugging information).
2792 The current function has almost always been reached by single
2793 stepping a call or return instruction. NEXT_FRAME belongs to the
2794 current function, and the breakpoint will be set at the caller's
2797 This is a separate function rather than reusing
2798 insert_step_resume_breakpoint_at_frame in order to avoid
2799 get_prev_frame, which may stop prematurely (see the implementation
2800 of frame_unwind_id for an example). */
2803 insert_step_resume_breakpoint_at_caller (struct frame_info *next_frame)
2805 struct symtab_and_line sr_sal;
2807 /* We shouldn't have gotten here if we don't know where the call site
2809 gdb_assert (frame_id_p (frame_unwind_id (next_frame)));
2811 init_sal (&sr_sal); /* initialize to zeros */
2813 sr_sal.pc = ADDR_BITS_REMOVE (frame_pc_unwind (next_frame));
2814 sr_sal.section = find_pc_overlay (sr_sal.pc);
2816 insert_step_resume_breakpoint_at_sal (sr_sal, frame_unwind_id (next_frame));
2820 stop_stepping (struct execution_control_state *ecs)
2823 fprintf_unfiltered (gdb_stdlog, "infrun: stop_stepping\n");
2825 /* Let callers know we don't want to wait for the inferior anymore. */
2826 ecs->wait_some_more = 0;
2829 /* This function handles various cases where we need to continue
2830 waiting for the inferior. */
2831 /* (Used to be the keep_going: label in the old wait_for_inferior) */
2834 keep_going (struct execution_control_state *ecs)
2836 /* Save the pc before execution, to compare with pc after stop. */
2837 prev_pc = read_pc (); /* Might have been DECR_AFTER_BREAK */
2839 /* If we did not do break;, it means we should keep running the
2840 inferior and not return to debugger. */
2842 if (trap_expected && stop_signal != TARGET_SIGNAL_TRAP)
2844 /* We took a signal (which we are supposed to pass through to
2845 the inferior, else we'd have done a break above) and we
2846 haven't yet gotten our trap. Simply continue. */
2847 resume (currently_stepping (ecs), stop_signal);
2851 /* Either the trap was not expected, but we are continuing
2852 anyway (the user asked that this signal be passed to the
2855 The signal was SIGTRAP, e.g. it was our signal, but we
2856 decided we should resume from it.
2858 We're going to run this baby now! */
2860 if (!breakpoints_inserted && !ecs->another_trap)
2862 breakpoints_failed = insert_breakpoints ();
2863 if (breakpoints_failed)
2865 stop_stepping (ecs);
2868 breakpoints_inserted = 1;
2871 trap_expected = ecs->another_trap;
2873 /* Do not deliver SIGNAL_TRAP (except when the user explicitly
2874 specifies that such a signal should be delivered to the
2877 Typically, this would occure when a user is debugging a
2878 target monitor on a simulator: the target monitor sets a
2879 breakpoint; the simulator encounters this break-point and
2880 halts the simulation handing control to GDB; GDB, noteing
2881 that the break-point isn't valid, returns control back to the
2882 simulator; the simulator then delivers the hardware
2883 equivalent of a SIGNAL_TRAP to the program being debugged. */
2885 if (stop_signal == TARGET_SIGNAL_TRAP && !signal_program[stop_signal])
2886 stop_signal = TARGET_SIGNAL_0;
2889 resume (currently_stepping (ecs), stop_signal);
2892 prepare_to_wait (ecs);
2895 /* This function normally comes after a resume, before
2896 handle_inferior_event exits. It takes care of any last bits of
2897 housekeeping, and sets the all-important wait_some_more flag. */
2900 prepare_to_wait (struct execution_control_state *ecs)
2903 fprintf_unfiltered (gdb_stdlog, "infrun: prepare_to_wait\n");
2904 if (ecs->infwait_state == infwait_normal_state)
2906 overlay_cache_invalid = 1;
2908 /* We have to invalidate the registers BEFORE calling
2909 target_wait because they can be loaded from the target while
2910 in target_wait. This makes remote debugging a bit more
2911 efficient for those targets that provide critical registers
2912 as part of their normal status mechanism. */
2914 registers_changed ();
2915 ecs->waiton_ptid = pid_to_ptid (-1);
2916 ecs->wp = &(ecs->ws);
2918 /* This is the old end of the while loop. Let everybody know we
2919 want to wait for the inferior some more and get called again
2921 ecs->wait_some_more = 1;
2924 /* Print why the inferior has stopped. We always print something when
2925 the inferior exits, or receives a signal. The rest of the cases are
2926 dealt with later on in normal_stop() and print_it_typical(). Ideally
2927 there should be a call to this function from handle_inferior_event()
2928 each time stop_stepping() is called.*/
2930 print_stop_reason (enum inferior_stop_reason stop_reason, int stop_info)
2932 switch (stop_reason)
2935 /* We don't deal with these cases from handle_inferior_event()
2938 case END_STEPPING_RANGE:
2939 /* We are done with a step/next/si/ni command. */
2940 /* For now print nothing. */
2941 /* Print a message only if not in the middle of doing a "step n"
2942 operation for n > 1 */
2943 if (!step_multi || !stop_step)
2944 if (ui_out_is_mi_like_p (uiout))
2947 async_reason_lookup (EXEC_ASYNC_END_STEPPING_RANGE));
2949 case BREAKPOINT_HIT:
2950 /* We found a breakpoint. */
2951 /* For now print nothing. */
2954 /* The inferior was terminated by a signal. */
2955 annotate_signalled ();
2956 if (ui_out_is_mi_like_p (uiout))
2959 async_reason_lookup (EXEC_ASYNC_EXITED_SIGNALLED));
2960 ui_out_text (uiout, "\nProgram terminated with signal ");
2961 annotate_signal_name ();
2962 ui_out_field_string (uiout, "signal-name",
2963 target_signal_to_name (stop_info));
2964 annotate_signal_name_end ();
2965 ui_out_text (uiout, ", ");
2966 annotate_signal_string ();
2967 ui_out_field_string (uiout, "signal-meaning",
2968 target_signal_to_string (stop_info));
2969 annotate_signal_string_end ();
2970 ui_out_text (uiout, ".\n");
2971 ui_out_text (uiout, "The program no longer exists.\n");
2974 /* The inferior program is finished. */
2975 annotate_exited (stop_info);
2978 if (ui_out_is_mi_like_p (uiout))
2979 ui_out_field_string (uiout, "reason",
2980 async_reason_lookup (EXEC_ASYNC_EXITED));
2981 ui_out_text (uiout, "\nProgram exited with code ");
2982 ui_out_field_fmt (uiout, "exit-code", "0%o",
2983 (unsigned int) stop_info);
2984 ui_out_text (uiout, ".\n");
2988 if (ui_out_is_mi_like_p (uiout))
2991 async_reason_lookup (EXEC_ASYNC_EXITED_NORMALLY));
2992 ui_out_text (uiout, "\nProgram exited normally.\n");
2994 /* Support the --return-child-result option. */
2995 return_child_result_value = stop_info;
2997 case SIGNAL_RECEIVED:
2998 /* Signal received. The signal table tells us to print about
3001 ui_out_text (uiout, "\nProgram received signal ");
3002 annotate_signal_name ();
3003 if (ui_out_is_mi_like_p (uiout))
3005 (uiout, "reason", async_reason_lookup (EXEC_ASYNC_SIGNAL_RECEIVED));
3006 ui_out_field_string (uiout, "signal-name",
3007 target_signal_to_name (stop_info));
3008 annotate_signal_name_end ();
3009 ui_out_text (uiout, ", ");
3010 annotate_signal_string ();
3011 ui_out_field_string (uiout, "signal-meaning",
3012 target_signal_to_string (stop_info));
3013 annotate_signal_string_end ();
3014 ui_out_text (uiout, ".\n");
3017 internal_error (__FILE__, __LINE__,
3018 _("print_stop_reason: unrecognized enum value"));
3024 /* Here to return control to GDB when the inferior stops for real.
3025 Print appropriate messages, remove breakpoints, give terminal our modes.
3027 STOP_PRINT_FRAME nonzero means print the executing frame
3028 (pc, function, args, file, line number and line text).
3029 BREAKPOINTS_FAILED nonzero means stop was due to error
3030 attempting to insert breakpoints. */
3035 struct target_waitstatus last;
3038 get_last_target_status (&last_ptid, &last);
3040 /* As with the notification of thread events, we want to delay
3041 notifying the user that we've switched thread context until
3042 the inferior actually stops.
3044 There's no point in saying anything if the inferior has exited.
3045 Note that SIGNALLED here means "exited with a signal", not
3046 "received a signal". */
3047 if (!ptid_equal (previous_inferior_ptid, inferior_ptid)
3048 && target_has_execution
3049 && last.kind != TARGET_WAITKIND_SIGNALLED
3050 && last.kind != TARGET_WAITKIND_EXITED)
3052 target_terminal_ours_for_output ();
3053 printf_filtered (_("[Switching to %s]\n"),
3054 target_pid_or_tid_to_str (inferior_ptid));
3055 previous_inferior_ptid = inferior_ptid;
3058 /* NOTE drow/2004-01-17: Is this still necessary? */
3059 /* Make sure that the current_frame's pc is correct. This
3060 is a correction for setting up the frame info before doing
3061 DECR_PC_AFTER_BREAK */
3062 if (target_has_execution)
3063 /* FIXME: cagney/2002-12-06: Has the PC changed? Thanks to
3064 DECR_PC_AFTER_BREAK, the program counter can change. Ask the
3065 frame code to check for this and sort out any resultant mess.
3066 DECR_PC_AFTER_BREAK needs to just go away. */
3067 deprecated_update_frame_pc_hack (get_current_frame (), read_pc ());
3069 if (target_has_execution && breakpoints_inserted)
3071 if (remove_breakpoints ())
3073 target_terminal_ours_for_output ();
3074 printf_filtered (_("\
3075 Cannot remove breakpoints because program is no longer writable.\n\
3076 It might be running in another process.\n\
3077 Further execution is probably impossible.\n"));
3080 breakpoints_inserted = 0;
3082 /* Delete the breakpoint we stopped at, if it wants to be deleted.
3083 Delete any breakpoint that is to be deleted at the next stop. */
3085 breakpoint_auto_delete (stop_bpstat);
3087 /* If an auto-display called a function and that got a signal,
3088 delete that auto-display to avoid an infinite recursion. */
3090 if (stopped_by_random_signal)
3091 disable_current_display ();
3093 /* Don't print a message if in the middle of doing a "step n"
3094 operation for n > 1 */
3095 if (step_multi && stop_step)
3098 target_terminal_ours ();
3100 /* Set the current source location. This will also happen if we
3101 display the frame below, but the current SAL will be incorrect
3102 during a user hook-stop function. */
3103 if (target_has_stack && !stop_stack_dummy)
3104 set_current_sal_from_frame (get_current_frame (), 1);
3106 /* Look up the hook_stop and run it (CLI internally handles problem
3107 of stop_command's pre-hook not existing). */
3109 catch_errors (hook_stop_stub, stop_command,
3110 "Error while running hook_stop:\n", RETURN_MASK_ALL);
3112 if (!target_has_stack)
3118 /* Select innermost stack frame - i.e., current frame is frame 0,
3119 and current location is based on that.
3120 Don't do this on return from a stack dummy routine,
3121 or if the program has exited. */
3123 if (!stop_stack_dummy)
3125 select_frame (get_current_frame ());
3127 /* Print current location without a level number, if
3128 we have changed functions or hit a breakpoint.
3129 Print source line if we have one.
3130 bpstat_print() contains the logic deciding in detail
3131 what to print, based on the event(s) that just occurred. */
3133 if (stop_print_frame && deprecated_selected_frame)
3137 int do_frame_printing = 1;
3139 bpstat_ret = bpstat_print (stop_bpstat);
3143 /* FIXME: cagney/2002-12-01: Given that a frame ID does
3144 (or should) carry around the function and does (or
3145 should) use that when doing a frame comparison. */
3147 && frame_id_eq (step_frame_id,
3148 get_frame_id (get_current_frame ()))
3149 && step_start_function == find_pc_function (stop_pc))
3150 source_flag = SRC_LINE; /* finished step, just print source line */
3152 source_flag = SRC_AND_LOC; /* print location and source line */
3154 case PRINT_SRC_AND_LOC:
3155 source_flag = SRC_AND_LOC; /* print location and source line */
3157 case PRINT_SRC_ONLY:
3158 source_flag = SRC_LINE;
3161 source_flag = SRC_LINE; /* something bogus */
3162 do_frame_printing = 0;
3165 internal_error (__FILE__, __LINE__, _("Unknown value."));
3167 /* For mi, have the same behavior every time we stop:
3168 print everything but the source line. */
3169 if (ui_out_is_mi_like_p (uiout))
3170 source_flag = LOC_AND_ADDRESS;
3172 if (ui_out_is_mi_like_p (uiout))
3173 ui_out_field_int (uiout, "thread-id",
3174 pid_to_thread_id (inferior_ptid));
3175 /* The behavior of this routine with respect to the source
3177 SRC_LINE: Print only source line
3178 LOCATION: Print only location
3179 SRC_AND_LOC: Print location and source line */
3180 if (do_frame_printing)
3181 print_stack_frame (get_selected_frame (NULL), 0, source_flag);
3183 /* Display the auto-display expressions. */
3188 /* Save the function value return registers, if we care.
3189 We might be about to restore their previous contents. */
3190 if (proceed_to_finish)
3191 /* NB: The copy goes through to the target picking up the value of
3192 all the registers. */
3193 regcache_cpy (stop_registers, current_regcache);
3195 if (stop_stack_dummy)
3197 /* Pop the empty frame that contains the stack dummy. POP_FRAME
3198 ends with a setting of the current frame, so we can use that
3200 frame_pop (get_current_frame ());
3201 /* Set stop_pc to what it was before we called the function.
3202 Can't rely on restore_inferior_status because that only gets
3203 called if we don't stop in the called function. */
3204 stop_pc = read_pc ();
3205 select_frame (get_current_frame ());
3209 annotate_stopped ();
3210 observer_notify_normal_stop (stop_bpstat);
3214 hook_stop_stub (void *cmd)
3216 execute_cmd_pre_hook ((struct cmd_list_element *) cmd);
3221 signal_stop_state (int signo)
3223 return signal_stop[signo];
3227 signal_print_state (int signo)
3229 return signal_print[signo];
3233 signal_pass_state (int signo)
3235 return signal_program[signo];
3239 signal_stop_update (int signo, int state)
3241 int ret = signal_stop[signo];
3242 signal_stop[signo] = state;
3247 signal_print_update (int signo, int state)
3249 int ret = signal_print[signo];
3250 signal_print[signo] = state;
3255 signal_pass_update (int signo, int state)
3257 int ret = signal_program[signo];
3258 signal_program[signo] = state;
3263 sig_print_header (void)
3265 printf_filtered (_("\
3266 Signal Stop\tPrint\tPass to program\tDescription\n"));
3270 sig_print_info (enum target_signal oursig)
3272 char *name = target_signal_to_name (oursig);
3273 int name_padding = 13 - strlen (name);
3275 if (name_padding <= 0)
3278 printf_filtered ("%s", name);
3279 printf_filtered ("%*.*s ", name_padding, name_padding, " ");
3280 printf_filtered ("%s\t", signal_stop[oursig] ? "Yes" : "No");
3281 printf_filtered ("%s\t", signal_print[oursig] ? "Yes" : "No");
3282 printf_filtered ("%s\t\t", signal_program[oursig] ? "Yes" : "No");
3283 printf_filtered ("%s\n", target_signal_to_string (oursig));
3286 /* Specify how various signals in the inferior should be handled. */
3289 handle_command (char *args, int from_tty)
3292 int digits, wordlen;
3293 int sigfirst, signum, siglast;
3294 enum target_signal oursig;
3297 unsigned char *sigs;
3298 struct cleanup *old_chain;
3302 error_no_arg (_("signal to handle"));
3305 /* Allocate and zero an array of flags for which signals to handle. */
3307 nsigs = (int) TARGET_SIGNAL_LAST;
3308 sigs = (unsigned char *) alloca (nsigs);
3309 memset (sigs, 0, nsigs);
3311 /* Break the command line up into args. */
3313 argv = buildargv (args);
3318 old_chain = make_cleanup_freeargv (argv);
3320 /* Walk through the args, looking for signal oursigs, signal names, and
3321 actions. Signal numbers and signal names may be interspersed with
3322 actions, with the actions being performed for all signals cumulatively
3323 specified. Signal ranges can be specified as <LOW>-<HIGH>. */
3325 while (*argv != NULL)
3327 wordlen = strlen (*argv);
3328 for (digits = 0; isdigit ((*argv)[digits]); digits++)
3332 sigfirst = siglast = -1;
3334 if (wordlen >= 1 && !strncmp (*argv, "all", wordlen))
3336 /* Apply action to all signals except those used by the
3337 debugger. Silently skip those. */
3340 siglast = nsigs - 1;
3342 else if (wordlen >= 1 && !strncmp (*argv, "stop", wordlen))
3344 SET_SIGS (nsigs, sigs, signal_stop);
3345 SET_SIGS (nsigs, sigs, signal_print);
3347 else if (wordlen >= 1 && !strncmp (*argv, "ignore", wordlen))
3349 UNSET_SIGS (nsigs, sigs, signal_program);
3351 else if (wordlen >= 2 && !strncmp (*argv, "print", wordlen))
3353 SET_SIGS (nsigs, sigs, signal_print);
3355 else if (wordlen >= 2 && !strncmp (*argv, "pass", wordlen))
3357 SET_SIGS (nsigs, sigs, signal_program);
3359 else if (wordlen >= 3 && !strncmp (*argv, "nostop", wordlen))
3361 UNSET_SIGS (nsigs, sigs, signal_stop);
3363 else if (wordlen >= 3 && !strncmp (*argv, "noignore", wordlen))
3365 SET_SIGS (nsigs, sigs, signal_program);
3367 else if (wordlen >= 4 && !strncmp (*argv, "noprint", wordlen))
3369 UNSET_SIGS (nsigs, sigs, signal_print);
3370 UNSET_SIGS (nsigs, sigs, signal_stop);
3372 else if (wordlen >= 4 && !strncmp (*argv, "nopass", wordlen))
3374 UNSET_SIGS (nsigs, sigs, signal_program);
3376 else if (digits > 0)
3378 /* It is numeric. The numeric signal refers to our own
3379 internal signal numbering from target.h, not to host/target
3380 signal number. This is a feature; users really should be
3381 using symbolic names anyway, and the common ones like
3382 SIGHUP, SIGINT, SIGALRM, etc. will work right anyway. */
3384 sigfirst = siglast = (int)
3385 target_signal_from_command (atoi (*argv));
3386 if ((*argv)[digits] == '-')
3389 target_signal_from_command (atoi ((*argv) + digits + 1));
3391 if (sigfirst > siglast)
3393 /* Bet he didn't figure we'd think of this case... */
3401 oursig = target_signal_from_name (*argv);
3402 if (oursig != TARGET_SIGNAL_UNKNOWN)
3404 sigfirst = siglast = (int) oursig;
3408 /* Not a number and not a recognized flag word => complain. */
3409 error (_("Unrecognized or ambiguous flag word: \"%s\"."), *argv);
3413 /* If any signal numbers or symbol names were found, set flags for
3414 which signals to apply actions to. */
3416 for (signum = sigfirst; signum >= 0 && signum <= siglast; signum++)
3418 switch ((enum target_signal) signum)
3420 case TARGET_SIGNAL_TRAP:
3421 case TARGET_SIGNAL_INT:
3422 if (!allsigs && !sigs[signum])
3424 if (query ("%s is used by the debugger.\n\
3425 Are you sure you want to change it? ", target_signal_to_name ((enum target_signal) signum)))
3431 printf_unfiltered (_("Not confirmed, unchanged.\n"));
3432 gdb_flush (gdb_stdout);
3436 case TARGET_SIGNAL_0:
3437 case TARGET_SIGNAL_DEFAULT:
3438 case TARGET_SIGNAL_UNKNOWN:
3439 /* Make sure that "all" doesn't print these. */
3450 target_notice_signals (inferior_ptid);
3454 /* Show the results. */
3455 sig_print_header ();
3456 for (signum = 0; signum < nsigs; signum++)
3460 sig_print_info (signum);
3465 do_cleanups (old_chain);
3469 xdb_handle_command (char *args, int from_tty)
3472 struct cleanup *old_chain;
3474 /* Break the command line up into args. */
3476 argv = buildargv (args);
3481 old_chain = make_cleanup_freeargv (argv);
3482 if (argv[1] != (char *) NULL)
3487 bufLen = strlen (argv[0]) + 20;
3488 argBuf = (char *) xmalloc (bufLen);
3492 enum target_signal oursig;
3494 oursig = target_signal_from_name (argv[0]);
3495 memset (argBuf, 0, bufLen);
3496 if (strcmp (argv[1], "Q") == 0)
3497 sprintf (argBuf, "%s %s", argv[0], "noprint");
3500 if (strcmp (argv[1], "s") == 0)
3502 if (!signal_stop[oursig])
3503 sprintf (argBuf, "%s %s", argv[0], "stop");
3505 sprintf (argBuf, "%s %s", argv[0], "nostop");
3507 else if (strcmp (argv[1], "i") == 0)
3509 if (!signal_program[oursig])
3510 sprintf (argBuf, "%s %s", argv[0], "pass");
3512 sprintf (argBuf, "%s %s", argv[0], "nopass");
3514 else if (strcmp (argv[1], "r") == 0)
3516 if (!signal_print[oursig])
3517 sprintf (argBuf, "%s %s", argv[0], "print");
3519 sprintf (argBuf, "%s %s", argv[0], "noprint");
3525 handle_command (argBuf, from_tty);
3527 printf_filtered (_("Invalid signal handling flag.\n"));
3532 do_cleanups (old_chain);
3535 /* Print current contents of the tables set by the handle command.
3536 It is possible we should just be printing signals actually used
3537 by the current target (but for things to work right when switching
3538 targets, all signals should be in the signal tables). */
3541 signals_info (char *signum_exp, int from_tty)
3543 enum target_signal oursig;
3544 sig_print_header ();
3548 /* First see if this is a symbol name. */
3549 oursig = target_signal_from_name (signum_exp);
3550 if (oursig == TARGET_SIGNAL_UNKNOWN)
3552 /* No, try numeric. */
3554 target_signal_from_command (parse_and_eval_long (signum_exp));
3556 sig_print_info (oursig);
3560 printf_filtered ("\n");
3561 /* These ugly casts brought to you by the native VAX compiler. */
3562 for (oursig = TARGET_SIGNAL_FIRST;
3563 (int) oursig < (int) TARGET_SIGNAL_LAST;
3564 oursig = (enum target_signal) ((int) oursig + 1))
3568 if (oursig != TARGET_SIGNAL_UNKNOWN
3569 && oursig != TARGET_SIGNAL_DEFAULT && oursig != TARGET_SIGNAL_0)
3570 sig_print_info (oursig);
3573 printf_filtered (_("\nUse the \"handle\" command to change these tables.\n"));
3576 struct inferior_status
3578 enum target_signal stop_signal;
3582 int stop_stack_dummy;
3583 int stopped_by_random_signal;
3585 CORE_ADDR step_range_start;
3586 CORE_ADDR step_range_end;
3587 struct frame_id step_frame_id;
3588 enum step_over_calls_kind step_over_calls;
3589 CORE_ADDR step_resume_break_address;
3590 int stop_after_trap;
3592 struct regcache *stop_registers;
3594 /* These are here because if call_function_by_hand has written some
3595 registers and then decides to call error(), we better not have changed
3597 struct regcache *registers;
3599 /* A frame unique identifier. */
3600 struct frame_id selected_frame_id;
3602 int breakpoint_proceeded;
3603 int restore_stack_info;
3604 int proceed_to_finish;
3608 write_inferior_status_register (struct inferior_status *inf_status, int regno,
3611 int size = register_size (current_gdbarch, regno);
3612 void *buf = alloca (size);
3613 store_signed_integer (buf, size, val);
3614 regcache_raw_write (inf_status->registers, regno, buf);
3617 /* Save all of the information associated with the inferior<==>gdb
3618 connection. INF_STATUS is a pointer to a "struct inferior_status"
3619 (defined in inferior.h). */
3621 struct inferior_status *
3622 save_inferior_status (int restore_stack_info)
3624 struct inferior_status *inf_status = XMALLOC (struct inferior_status);
3626 inf_status->stop_signal = stop_signal;
3627 inf_status->stop_pc = stop_pc;
3628 inf_status->stop_step = stop_step;
3629 inf_status->stop_stack_dummy = stop_stack_dummy;
3630 inf_status->stopped_by_random_signal = stopped_by_random_signal;
3631 inf_status->trap_expected = trap_expected;
3632 inf_status->step_range_start = step_range_start;
3633 inf_status->step_range_end = step_range_end;
3634 inf_status->step_frame_id = step_frame_id;
3635 inf_status->step_over_calls = step_over_calls;
3636 inf_status->stop_after_trap = stop_after_trap;
3637 inf_status->stop_soon = stop_soon;
3638 /* Save original bpstat chain here; replace it with copy of chain.
3639 If caller's caller is walking the chain, they'll be happier if we
3640 hand them back the original chain when restore_inferior_status is
3642 inf_status->stop_bpstat = stop_bpstat;
3643 stop_bpstat = bpstat_copy (stop_bpstat);
3644 inf_status->breakpoint_proceeded = breakpoint_proceeded;
3645 inf_status->restore_stack_info = restore_stack_info;
3646 inf_status->proceed_to_finish = proceed_to_finish;
3648 inf_status->stop_registers = regcache_dup_no_passthrough (stop_registers);
3650 inf_status->registers = regcache_dup (current_regcache);
3652 inf_status->selected_frame_id = get_frame_id (deprecated_selected_frame);
3657 restore_selected_frame (void *args)
3659 struct frame_id *fid = (struct frame_id *) args;
3660 struct frame_info *frame;
3662 frame = frame_find_by_id (*fid);
3664 /* If inf_status->selected_frame_id is NULL, there was no previously
3668 warning (_("Unable to restore previously selected frame."));
3672 select_frame (frame);
3678 restore_inferior_status (struct inferior_status *inf_status)
3680 stop_signal = inf_status->stop_signal;
3681 stop_pc = inf_status->stop_pc;
3682 stop_step = inf_status->stop_step;
3683 stop_stack_dummy = inf_status->stop_stack_dummy;
3684 stopped_by_random_signal = inf_status->stopped_by_random_signal;
3685 trap_expected = inf_status->trap_expected;
3686 step_range_start = inf_status->step_range_start;
3687 step_range_end = inf_status->step_range_end;
3688 step_frame_id = inf_status->step_frame_id;
3689 step_over_calls = inf_status->step_over_calls;
3690 stop_after_trap = inf_status->stop_after_trap;
3691 stop_soon = inf_status->stop_soon;
3692 bpstat_clear (&stop_bpstat);
3693 stop_bpstat = inf_status->stop_bpstat;
3694 breakpoint_proceeded = inf_status->breakpoint_proceeded;
3695 proceed_to_finish = inf_status->proceed_to_finish;
3697 /* FIXME: Is the restore of stop_registers always needed. */
3698 regcache_xfree (stop_registers);
3699 stop_registers = inf_status->stop_registers;
3701 /* The inferior can be gone if the user types "print exit(0)"
3702 (and perhaps other times). */
3703 if (target_has_execution)
3704 /* NB: The register write goes through to the target. */
3705 regcache_cpy (current_regcache, inf_status->registers);
3706 regcache_xfree (inf_status->registers);
3708 /* FIXME: If we are being called after stopping in a function which
3709 is called from gdb, we should not be trying to restore the
3710 selected frame; it just prints a spurious error message (The
3711 message is useful, however, in detecting bugs in gdb (like if gdb
3712 clobbers the stack)). In fact, should we be restoring the
3713 inferior status at all in that case? . */
3715 if (target_has_stack && inf_status->restore_stack_info)
3717 /* The point of catch_errors is that if the stack is clobbered,
3718 walking the stack might encounter a garbage pointer and
3719 error() trying to dereference it. */
3721 (restore_selected_frame, &inf_status->selected_frame_id,
3722 "Unable to restore previously selected frame:\n",
3723 RETURN_MASK_ERROR) == 0)
3724 /* Error in restoring the selected frame. Select the innermost
3726 select_frame (get_current_frame ());
3734 do_restore_inferior_status_cleanup (void *sts)
3736 restore_inferior_status (sts);
3740 make_cleanup_restore_inferior_status (struct inferior_status *inf_status)
3742 return make_cleanup (do_restore_inferior_status_cleanup, inf_status);
3746 discard_inferior_status (struct inferior_status *inf_status)
3748 /* See save_inferior_status for info on stop_bpstat. */
3749 bpstat_clear (&inf_status->stop_bpstat);
3750 regcache_xfree (inf_status->registers);
3751 regcache_xfree (inf_status->stop_registers);
3756 inferior_has_forked (int pid, int *child_pid)
3758 struct target_waitstatus last;
3761 get_last_target_status (&last_ptid, &last);
3763 if (last.kind != TARGET_WAITKIND_FORKED)
3766 if (ptid_get_pid (last_ptid) != pid)
3769 *child_pid = last.value.related_pid;
3774 inferior_has_vforked (int pid, int *child_pid)
3776 struct target_waitstatus last;
3779 get_last_target_status (&last_ptid, &last);
3781 if (last.kind != TARGET_WAITKIND_VFORKED)
3784 if (ptid_get_pid (last_ptid) != pid)
3787 *child_pid = last.value.related_pid;
3792 inferior_has_execd (int pid, char **execd_pathname)
3794 struct target_waitstatus last;
3797 get_last_target_status (&last_ptid, &last);
3799 if (last.kind != TARGET_WAITKIND_EXECD)
3802 if (ptid_get_pid (last_ptid) != pid)
3805 *execd_pathname = xstrdup (last.value.execd_pathname);
3809 /* Oft used ptids */
3811 ptid_t minus_one_ptid;
3813 /* Create a ptid given the necessary PID, LWP, and TID components. */
3816 ptid_build (int pid, long lwp, long tid)
3826 /* Create a ptid from just a pid. */
3829 pid_to_ptid (int pid)
3831 return ptid_build (pid, 0, 0);
3834 /* Fetch the pid (process id) component from a ptid. */
3837 ptid_get_pid (ptid_t ptid)
3842 /* Fetch the lwp (lightweight process) component from a ptid. */
3845 ptid_get_lwp (ptid_t ptid)
3850 /* Fetch the tid (thread id) component from a ptid. */
3853 ptid_get_tid (ptid_t ptid)
3858 /* ptid_equal() is used to test equality of two ptids. */
3861 ptid_equal (ptid_t ptid1, ptid_t ptid2)
3863 return (ptid1.pid == ptid2.pid && ptid1.lwp == ptid2.lwp
3864 && ptid1.tid == ptid2.tid);
3867 /* restore_inferior_ptid() will be used by the cleanup machinery
3868 to restore the inferior_ptid value saved in a call to
3869 save_inferior_ptid(). */
3872 restore_inferior_ptid (void *arg)
3874 ptid_t *saved_ptid_ptr = arg;
3875 inferior_ptid = *saved_ptid_ptr;
3879 /* Save the value of inferior_ptid so that it may be restored by a
3880 later call to do_cleanups(). Returns the struct cleanup pointer
3881 needed for later doing the cleanup. */
3884 save_inferior_ptid (void)
3886 ptid_t *saved_ptid_ptr;
3888 saved_ptid_ptr = xmalloc (sizeof (ptid_t));
3889 *saved_ptid_ptr = inferior_ptid;
3890 return make_cleanup (restore_inferior_ptid, saved_ptid_ptr);
3897 stop_registers = regcache_xmalloc (current_gdbarch);
3901 _initialize_infrun (void)
3905 struct cmd_list_element *c;
3907 DEPRECATED_REGISTER_GDBARCH_SWAP (stop_registers);
3908 deprecated_register_gdbarch_swap (NULL, 0, build_infrun);
3910 add_info ("signals", signals_info, _("\
3911 What debugger does when program gets various signals.\n\
3912 Specify a signal as argument to print info on that signal only."));
3913 add_info_alias ("handle", "signals", 0);
3915 add_com ("handle", class_run, handle_command, _("\
3916 Specify how to handle a signal.\n\
3917 Args are signals and actions to apply to those signals.\n\
3918 Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
3919 from 1-15 are allowed for compatibility with old versions of GDB.\n\
3920 Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
3921 The special arg \"all\" is recognized to mean all signals except those\n\
3922 used by the debugger, typically SIGTRAP and SIGINT.\n\
3923 Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\
3924 \"pass\", \"nopass\", \"ignore\", or \"noignore\".\n\
3925 Stop means reenter debugger if this signal happens (implies print).\n\
3926 Print means print a message if this signal happens.\n\
3927 Pass means let program see this signal; otherwise program doesn't know.\n\
3928 Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
3929 Pass and Stop may be combined."));
3932 add_com ("lz", class_info, signals_info, _("\
3933 What debugger does when program gets various signals.\n\
3934 Specify a signal as argument to print info on that signal only."));
3935 add_com ("z", class_run, xdb_handle_command, _("\
3936 Specify how to handle a signal.\n\
3937 Args are signals and actions to apply to those signals.\n\
3938 Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
3939 from 1-15 are allowed for compatibility with old versions of GDB.\n\
3940 Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
3941 The special arg \"all\" is recognized to mean all signals except those\n\
3942 used by the debugger, typically SIGTRAP and SIGINT.\n\
3943 Recognized actions include \"s\" (toggles between stop and nostop), \n\
3944 \"r\" (toggles between print and noprint), \"i\" (toggles between pass and \
3945 nopass), \"Q\" (noprint)\n\
3946 Stop means reenter debugger if this signal happens (implies print).\n\
3947 Print means print a message if this signal happens.\n\
3948 Pass means let program see this signal; otherwise program doesn't know.\n\
3949 Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
3950 Pass and Stop may be combined."));
3954 stop_command = add_cmd ("stop", class_obscure,
3955 not_just_help_class_command, _("\
3956 There is no `stop' command, but you can set a hook on `stop'.\n\
3957 This allows you to set a list of commands to be run each time execution\n\
3958 of the program stops."), &cmdlist);
3960 add_setshow_zinteger_cmd ("infrun", class_maintenance, &debug_infrun, _("\
3961 Set inferior debugging."), _("\
3962 Show inferior debugging."), _("\
3963 When non-zero, inferior specific debugging is enabled."),
3966 &setdebuglist, &showdebuglist);
3968 numsigs = (int) TARGET_SIGNAL_LAST;
3969 signal_stop = (unsigned char *) xmalloc (sizeof (signal_stop[0]) * numsigs);
3970 signal_print = (unsigned char *)
3971 xmalloc (sizeof (signal_print[0]) * numsigs);
3972 signal_program = (unsigned char *)
3973 xmalloc (sizeof (signal_program[0]) * numsigs);
3974 for (i = 0; i < numsigs; i++)
3977 signal_print[i] = 1;
3978 signal_program[i] = 1;
3981 /* Signals caused by debugger's own actions
3982 should not be given to the program afterwards. */
3983 signal_program[TARGET_SIGNAL_TRAP] = 0;
3984 signal_program[TARGET_SIGNAL_INT] = 0;
3986 /* Signals that are not errors should not normally enter the debugger. */
3987 signal_stop[TARGET_SIGNAL_ALRM] = 0;
3988 signal_print[TARGET_SIGNAL_ALRM] = 0;
3989 signal_stop[TARGET_SIGNAL_VTALRM] = 0;
3990 signal_print[TARGET_SIGNAL_VTALRM] = 0;
3991 signal_stop[TARGET_SIGNAL_PROF] = 0;
3992 signal_print[TARGET_SIGNAL_PROF] = 0;
3993 signal_stop[TARGET_SIGNAL_CHLD] = 0;
3994 signal_print[TARGET_SIGNAL_CHLD] = 0;
3995 signal_stop[TARGET_SIGNAL_IO] = 0;
3996 signal_print[TARGET_SIGNAL_IO] = 0;
3997 signal_stop[TARGET_SIGNAL_POLL] = 0;
3998 signal_print[TARGET_SIGNAL_POLL] = 0;
3999 signal_stop[TARGET_SIGNAL_URG] = 0;
4000 signal_print[TARGET_SIGNAL_URG] = 0;
4001 signal_stop[TARGET_SIGNAL_WINCH] = 0;
4002 signal_print[TARGET_SIGNAL_WINCH] = 0;
4004 /* These signals are used internally by user-level thread
4005 implementations. (See signal(5) on Solaris.) Like the above
4006 signals, a healthy program receives and handles them as part of
4007 its normal operation. */
4008 signal_stop[TARGET_SIGNAL_LWP] = 0;
4009 signal_print[TARGET_SIGNAL_LWP] = 0;
4010 signal_stop[TARGET_SIGNAL_WAITING] = 0;
4011 signal_print[TARGET_SIGNAL_WAITING] = 0;
4012 signal_stop[TARGET_SIGNAL_CANCEL] = 0;
4013 signal_print[TARGET_SIGNAL_CANCEL] = 0;
4015 add_setshow_zinteger_cmd ("stop-on-solib-events", class_support,
4016 &stop_on_solib_events, _("\
4017 Set stopping for shared library events."), _("\
4018 Show stopping for shared library events."), _("\
4019 If nonzero, gdb will give control to the user when the dynamic linker\n\
4020 notifies gdb of shared library events. The most common event of interest\n\
4021 to the user would be loading/unloading of a new library."),
4023 show_stop_on_solib_events,
4024 &setlist, &showlist);
4026 add_setshow_enum_cmd ("follow-fork-mode", class_run,
4027 follow_fork_mode_kind_names,
4028 &follow_fork_mode_string, _("\
4029 Set debugger response to a program call of fork or vfork."), _("\
4030 Show debugger response to a program call of fork or vfork."), _("\
4031 A fork or vfork creates a new process. follow-fork-mode can be:\n\
4032 parent - the original process is debugged after a fork\n\
4033 child - the new process is debugged after a fork\n\
4034 The unfollowed process will continue to run.\n\
4035 By default, the debugger will follow the parent process."),
4037 show_follow_fork_mode_string,
4038 &setlist, &showlist);
4040 add_setshow_enum_cmd ("scheduler-locking", class_run,
4041 scheduler_enums, &scheduler_mode, _("\
4042 Set mode for locking scheduler during execution."), _("\
4043 Show mode for locking scheduler during execution."), _("\
4044 off == no locking (threads may preempt at any time)\n\
4045 on == full locking (no thread except the current thread may run)\n\
4046 step == scheduler locked during every single-step operation.\n\
4047 In this mode, no other thread may run during a step command.\n\
4048 Other threads may run while stepping over a function call ('next')."),
4049 set_schedlock_func, /* traps on target vector */
4050 show_scheduler_mode,
4051 &setlist, &showlist);
4053 add_setshow_boolean_cmd ("step-mode", class_run, &step_stop_if_no_debug, _("\
4054 Set mode of the step operation."), _("\
4055 Show mode of the step operation."), _("\
4056 When set, doing a step over a function without debug line information\n\
4057 will stop at the first instruction of that function. Otherwise, the\n\
4058 function is skipped and the step command stops at a different source line."),
4060 show_step_stop_if_no_debug,
4061 &setlist, &showlist);
4063 /* ptid initializations */
4064 null_ptid = ptid_build (0, 0, 0);
4065 minus_one_ptid = ptid_build (-1, 0, 0);
4066 inferior_ptid = null_ptid;
4067 target_last_wait_ptid = minus_one_ptid;