2009-08-06 Paul Pluzhnikov <ppluzhnikov@google.com>
[external/binutils.git] / gdb / dwarf2-frame.c
1 /* Frame unwinder for frames with DWARF Call Frame Information.
2
3    Copyright (C) 2003, 2004, 2005, 2007, 2008, 2009
4    Free Software Foundation, Inc.
5
6    Contributed by Mark Kettenis.
7
8    This file is part of GDB.
9
10    This program is free software; you can redistribute it and/or modify
11    it under the terms of the GNU General Public License as published by
12    the Free Software Foundation; either version 3 of the License, or
13    (at your option) any later version.
14
15    This program is distributed in the hope that it will be useful,
16    but WITHOUT ANY WARRANTY; without even the implied warranty of
17    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18    GNU General Public License for more details.
19
20    You should have received a copy of the GNU General Public License
21    along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
22
23 #include "defs.h"
24 #include "dwarf2expr.h"
25 #include "dwarf2.h"
26 #include "frame.h"
27 #include "frame-base.h"
28 #include "frame-unwind.h"
29 #include "gdbcore.h"
30 #include "gdbtypes.h"
31 #include "symtab.h"
32 #include "objfiles.h"
33 #include "regcache.h"
34 #include "value.h"
35
36 #include "gdb_assert.h"
37 #include "gdb_string.h"
38
39 #include "complaints.h"
40 #include "dwarf2-frame.h"
41
42 struct comp_unit;
43
44 /* Call Frame Information (CFI).  */
45
46 /* Common Information Entry (CIE).  */
47
48 struct dwarf2_cie
49 {
50   /* Computation Unit for this CIE.  */
51   struct comp_unit *unit;
52
53   /* Offset into the .debug_frame section where this CIE was found.
54      Used to identify this CIE.  */
55   ULONGEST cie_pointer;
56
57   /* Constant that is factored out of all advance location
58      instructions.  */
59   ULONGEST code_alignment_factor;
60
61   /* Constants that is factored out of all offset instructions.  */
62   LONGEST data_alignment_factor;
63
64   /* Return address column.  */
65   ULONGEST return_address_register;
66
67   /* Instruction sequence to initialize a register set.  */
68   gdb_byte *initial_instructions;
69   gdb_byte *end;
70
71   /* Saved augmentation, in case it's needed later.  */
72   char *augmentation;
73
74   /* Encoding of addresses.  */
75   gdb_byte encoding;
76
77   /* Target address size in bytes.  */
78   int addr_size;
79
80   /* True if a 'z' augmentation existed.  */
81   unsigned char saw_z_augmentation;
82
83   /* True if an 'S' augmentation existed.  */
84   unsigned char signal_frame;
85
86   /* The version recorded in the CIE.  */
87   unsigned char version;
88 };
89
90 struct dwarf2_cie_table
91 {
92   int num_entries;
93   struct dwarf2_cie **entries;
94 };
95
96 /* Frame Description Entry (FDE).  */
97
98 struct dwarf2_fde
99 {
100   /* CIE for this FDE.  */
101   struct dwarf2_cie *cie;
102
103   /* First location associated with this FDE.  */
104   CORE_ADDR initial_location;
105
106   /* Number of bytes of program instructions described by this FDE.  */
107   CORE_ADDR address_range;
108
109   /* Instruction sequence.  */
110   gdb_byte *instructions;
111   gdb_byte *end;
112
113   /* True if this FDE is read from a .eh_frame instead of a .debug_frame
114      section.  */
115   unsigned char eh_frame_p;
116 };
117
118 struct dwarf2_fde_table
119 {
120   int num_entries;
121   struct dwarf2_fde **entries;
122 };
123
124 /* A minimal decoding of DWARF2 compilation units.  We only decode
125    what's needed to get to the call frame information.  */
126
127 struct comp_unit
128 {
129   /* Keep the bfd convenient.  */
130   bfd *abfd;
131
132   struct objfile *objfile;
133
134   /* Pointer to the .debug_frame section loaded into memory.  */
135   gdb_byte *dwarf_frame_buffer;
136
137   /* Length of the loaded .debug_frame section.  */
138   bfd_size_type dwarf_frame_size;
139
140   /* Pointer to the .debug_frame section.  */
141   asection *dwarf_frame_section;
142
143   /* Base for DW_EH_PE_datarel encodings.  */
144   bfd_vma dbase;
145
146   /* Base for DW_EH_PE_textrel encodings.  */
147   bfd_vma tbase;
148 };
149
150 static struct dwarf2_fde *dwarf2_frame_find_fde (CORE_ADDR *pc);
151
152 static int dwarf2_frame_adjust_regnum (struct gdbarch *gdbarch, int regnum,
153                                        int eh_frame_p);
154
155 static CORE_ADDR read_encoded_value (struct comp_unit *unit, gdb_byte encoding,
156                                      int ptr_len, gdb_byte *buf,
157                                      unsigned int *bytes_read_ptr,
158                                      CORE_ADDR func_base);
159 \f
160
161 /* Structure describing a frame state.  */
162
163 struct dwarf2_frame_state
164 {
165   /* Each register save state can be described in terms of a CFA slot,
166      another register, or a location expression.  */
167   struct dwarf2_frame_state_reg_info
168   {
169     struct dwarf2_frame_state_reg *reg;
170     int num_regs;
171
172     LONGEST cfa_offset;
173     ULONGEST cfa_reg;
174     enum {
175       CFA_UNSET,
176       CFA_REG_OFFSET,
177       CFA_EXP
178     } cfa_how;
179     gdb_byte *cfa_exp;
180
181     /* Used to implement DW_CFA_remember_state.  */
182     struct dwarf2_frame_state_reg_info *prev;
183   } regs;
184
185   /* The PC described by the current frame state.  */
186   CORE_ADDR pc;
187
188   /* Initial register set from the CIE.
189      Used to implement DW_CFA_restore.  */
190   struct dwarf2_frame_state_reg_info initial;
191
192   /* The information we care about from the CIE.  */
193   LONGEST data_align;
194   ULONGEST code_align;
195   ULONGEST retaddr_column;
196
197   /* Flags for known producer quirks.  */
198
199   /* The ARM compilers, in DWARF2 mode, assume that DW_CFA_def_cfa
200      and DW_CFA_def_cfa_offset takes a factored offset.  */
201   int armcc_cfa_offsets_sf;
202
203   /* The ARM compilers, in DWARF2 or DWARF3 mode, may assume that
204      the CFA is defined as REG - OFFSET rather than REG + OFFSET.  */
205   int armcc_cfa_offsets_reversed;
206 };
207
208 /* Store the length the expression for the CFA in the `cfa_reg' field,
209    which is unused in that case.  */
210 #define cfa_exp_len cfa_reg
211
212 /* Assert that the register set RS is large enough to store gdbarch_num_regs
213    columns.  If necessary, enlarge the register set.  */
214
215 static void
216 dwarf2_frame_state_alloc_regs (struct dwarf2_frame_state_reg_info *rs,
217                                int num_regs)
218 {
219   size_t size = sizeof (struct dwarf2_frame_state_reg);
220
221   if (num_regs <= rs->num_regs)
222     return;
223
224   rs->reg = (struct dwarf2_frame_state_reg *)
225     xrealloc (rs->reg, num_regs * size);
226
227   /* Initialize newly allocated registers.  */
228   memset (rs->reg + rs->num_regs, 0, (num_regs - rs->num_regs) * size);
229   rs->num_regs = num_regs;
230 }
231
232 /* Copy the register columns in register set RS into newly allocated
233    memory and return a pointer to this newly created copy.  */
234
235 static struct dwarf2_frame_state_reg *
236 dwarf2_frame_state_copy_regs (struct dwarf2_frame_state_reg_info *rs)
237 {
238   size_t size = rs->num_regs * sizeof (struct dwarf2_frame_state_reg);
239   struct dwarf2_frame_state_reg *reg;
240
241   reg = (struct dwarf2_frame_state_reg *) xmalloc (size);
242   memcpy (reg, rs->reg, size);
243
244   return reg;
245 }
246
247 /* Release the memory allocated to register set RS.  */
248
249 static void
250 dwarf2_frame_state_free_regs (struct dwarf2_frame_state_reg_info *rs)
251 {
252   if (rs)
253     {
254       dwarf2_frame_state_free_regs (rs->prev);
255
256       xfree (rs->reg);
257       xfree (rs);
258     }
259 }
260
261 /* Release the memory allocated to the frame state FS.  */
262
263 static void
264 dwarf2_frame_state_free (void *p)
265 {
266   struct dwarf2_frame_state *fs = p;
267
268   dwarf2_frame_state_free_regs (fs->initial.prev);
269   dwarf2_frame_state_free_regs (fs->regs.prev);
270   xfree (fs->initial.reg);
271   xfree (fs->regs.reg);
272   xfree (fs);
273 }
274 \f
275
276 /* Helper functions for execute_stack_op.  */
277
278 static CORE_ADDR
279 read_reg (void *baton, int reg)
280 {
281   struct frame_info *this_frame = (struct frame_info *) baton;
282   struct gdbarch *gdbarch = get_frame_arch (this_frame);
283   int regnum;
284   gdb_byte *buf;
285
286   regnum = gdbarch_dwarf2_reg_to_regnum (gdbarch, reg);
287
288   buf = alloca (register_size (gdbarch, regnum));
289   get_frame_register (this_frame, regnum, buf);
290
291   /* Convert the register to an integer.  This returns a LONGEST
292      rather than a CORE_ADDR, but unpack_pointer does the same thing
293      under the covers, and this makes more sense for non-pointer
294      registers.  Maybe read_reg and the associated interfaces should
295      deal with "struct value" instead of CORE_ADDR.  */
296   return unpack_long (register_type (gdbarch, regnum), buf);
297 }
298
299 static void
300 read_mem (void *baton, gdb_byte *buf, CORE_ADDR addr, size_t len)
301 {
302   read_memory (addr, buf, len);
303 }
304
305 static void
306 no_get_frame_base (void *baton, gdb_byte **start, size_t *length)
307 {
308   internal_error (__FILE__, __LINE__,
309                   _("Support for DW_OP_fbreg is unimplemented"));
310 }
311
312 static CORE_ADDR
313 no_get_tls_address (void *baton, CORE_ADDR offset)
314 {
315   internal_error (__FILE__, __LINE__,
316                   _("Support for DW_OP_GNU_push_tls_address is unimplemented"));
317 }
318
319 /* Execute the required actions for both the DW_CFA_restore and
320 DW_CFA_restore_extended instructions.  */
321 static void
322 dwarf2_restore_rule (struct gdbarch *gdbarch, ULONGEST reg_num,
323                      struct dwarf2_frame_state *fs, int eh_frame_p)
324 {
325   ULONGEST reg;
326
327   gdb_assert (fs->initial.reg);
328   reg = dwarf2_frame_adjust_regnum (gdbarch, reg_num, eh_frame_p);
329   dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
330
331   /* Check if this register was explicitly initialized in the
332   CIE initial instructions.  If not, default the rule to
333   UNSPECIFIED.  */
334   if (reg < fs->initial.num_regs)
335     fs->regs.reg[reg] = fs->initial.reg[reg];
336   else
337     fs->regs.reg[reg].how = DWARF2_FRAME_REG_UNSPECIFIED;
338
339   if (fs->regs.reg[reg].how == DWARF2_FRAME_REG_UNSPECIFIED)
340     complaint (&symfile_complaints, _("\
341 incomplete CFI data; DW_CFA_restore unspecified\n\
342 register %s (#%d) at %s"),
343                        gdbarch_register_name
344                        (gdbarch, gdbarch_dwarf2_reg_to_regnum (gdbarch, reg)),
345                        gdbarch_dwarf2_reg_to_regnum (gdbarch, reg),
346                        paddress (gdbarch, fs->pc));
347 }
348
349 static CORE_ADDR
350 execute_stack_op (gdb_byte *exp, ULONGEST len, int addr_size,
351                   struct frame_info *this_frame, CORE_ADDR initial)
352 {
353   struct dwarf_expr_context *ctx;
354   CORE_ADDR result;
355
356   ctx = new_dwarf_expr_context ();
357   ctx->gdbarch = get_frame_arch (this_frame);
358   ctx->addr_size = addr_size;
359   ctx->baton = this_frame;
360   ctx->read_reg = read_reg;
361   ctx->read_mem = read_mem;
362   ctx->get_frame_base = no_get_frame_base;
363   ctx->get_tls_address = no_get_tls_address;
364
365   dwarf_expr_push (ctx, initial);
366   dwarf_expr_eval (ctx, exp, len);
367   result = dwarf_expr_fetch (ctx, 0);
368
369   if (ctx->in_reg)
370     result = read_reg (this_frame, result);
371
372   free_dwarf_expr_context (ctx);
373
374   return result;
375 }
376 \f
377
378 static void
379 execute_cfa_program (struct dwarf2_fde *fde, gdb_byte *insn_ptr,
380                      gdb_byte *insn_end, struct frame_info *this_frame,
381                      struct dwarf2_frame_state *fs)
382 {
383   int eh_frame_p = fde->eh_frame_p;
384   CORE_ADDR pc = get_frame_pc (this_frame);
385   int bytes_read;
386   struct gdbarch *gdbarch = get_frame_arch (this_frame);
387   enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
388
389   while (insn_ptr < insn_end && fs->pc <= pc)
390     {
391       gdb_byte insn = *insn_ptr++;
392       ULONGEST utmp, reg;
393       LONGEST offset;
394
395       if ((insn & 0xc0) == DW_CFA_advance_loc)
396         fs->pc += (insn & 0x3f) * fs->code_align;
397       else if ((insn & 0xc0) == DW_CFA_offset)
398         {
399           reg = insn & 0x3f;
400           reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p);
401           insn_ptr = read_uleb128 (insn_ptr, insn_end, &utmp);
402           offset = utmp * fs->data_align;
403           dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
404           fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_OFFSET;
405           fs->regs.reg[reg].loc.offset = offset;
406         }
407       else if ((insn & 0xc0) == DW_CFA_restore)
408         {
409           reg = insn & 0x3f;
410           dwarf2_restore_rule (gdbarch, reg, fs, eh_frame_p);
411         }
412       else
413         {
414           switch (insn)
415             {
416             case DW_CFA_set_loc:
417               fs->pc = read_encoded_value (fde->cie->unit, fde->cie->encoding,
418                                            fde->cie->addr_size, insn_ptr,
419                                            &bytes_read, fde->initial_location);
420               /* Apply the objfile offset for relocatable objects.  */
421               fs->pc += ANOFFSET (fde->cie->unit->objfile->section_offsets,
422                                   SECT_OFF_TEXT (fde->cie->unit->objfile));
423               insn_ptr += bytes_read;
424               break;
425
426             case DW_CFA_advance_loc1:
427               utmp = extract_unsigned_integer (insn_ptr, 1, byte_order);
428               fs->pc += utmp * fs->code_align;
429               insn_ptr++;
430               break;
431             case DW_CFA_advance_loc2:
432               utmp = extract_unsigned_integer (insn_ptr, 2, byte_order);
433               fs->pc += utmp * fs->code_align;
434               insn_ptr += 2;
435               break;
436             case DW_CFA_advance_loc4:
437               utmp = extract_unsigned_integer (insn_ptr, 4, byte_order);
438               fs->pc += utmp * fs->code_align;
439               insn_ptr += 4;
440               break;
441
442             case DW_CFA_offset_extended:
443               insn_ptr = read_uleb128 (insn_ptr, insn_end, &reg);
444               reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p);
445               insn_ptr = read_uleb128 (insn_ptr, insn_end, &utmp);
446               offset = utmp * fs->data_align;
447               dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
448               fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_OFFSET;
449               fs->regs.reg[reg].loc.offset = offset;
450               break;
451
452             case DW_CFA_restore_extended:
453               insn_ptr = read_uleb128 (insn_ptr, insn_end, &reg);
454               dwarf2_restore_rule (gdbarch, reg, fs, eh_frame_p);
455               break;
456
457             case DW_CFA_undefined:
458               insn_ptr = read_uleb128 (insn_ptr, insn_end, &reg);
459               reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p);
460               dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
461               fs->regs.reg[reg].how = DWARF2_FRAME_REG_UNDEFINED;
462               break;
463
464             case DW_CFA_same_value:
465               insn_ptr = read_uleb128 (insn_ptr, insn_end, &reg);
466               reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p);
467               dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
468               fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAME_VALUE;
469               break;
470
471             case DW_CFA_register:
472               insn_ptr = read_uleb128 (insn_ptr, insn_end, &reg);
473               reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p);
474               insn_ptr = read_uleb128 (insn_ptr, insn_end, &utmp);
475               utmp = dwarf2_frame_adjust_regnum (gdbarch, utmp, eh_frame_p);
476               dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
477               fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_REG;
478               fs->regs.reg[reg].loc.reg = utmp;
479               break;
480
481             case DW_CFA_remember_state:
482               {
483                 struct dwarf2_frame_state_reg_info *new_rs;
484
485                 new_rs = XMALLOC (struct dwarf2_frame_state_reg_info);
486                 *new_rs = fs->regs;
487                 fs->regs.reg = dwarf2_frame_state_copy_regs (&fs->regs);
488                 fs->regs.prev = new_rs;
489               }
490               break;
491
492             case DW_CFA_restore_state:
493               {
494                 struct dwarf2_frame_state_reg_info *old_rs = fs->regs.prev;
495
496                 if (old_rs == NULL)
497                   {
498                     complaint (&symfile_complaints, _("\
499 bad CFI data; mismatched DW_CFA_restore_state at %s"),
500                                paddress (gdbarch, fs->pc));
501                   }
502                 else
503                   {
504                     xfree (fs->regs.reg);
505                     fs->regs = *old_rs;
506                     xfree (old_rs);
507                   }
508               }
509               break;
510
511             case DW_CFA_def_cfa:
512               insn_ptr = read_uleb128 (insn_ptr, insn_end, &fs->regs.cfa_reg);
513               insn_ptr = read_uleb128 (insn_ptr, insn_end, &utmp);
514
515               if (fs->armcc_cfa_offsets_sf)
516                 utmp *= fs->data_align;
517
518               fs->regs.cfa_offset = utmp;
519               fs->regs.cfa_how = CFA_REG_OFFSET;
520               break;
521
522             case DW_CFA_def_cfa_register:
523               insn_ptr = read_uleb128 (insn_ptr, insn_end, &fs->regs.cfa_reg);
524               fs->regs.cfa_reg = dwarf2_frame_adjust_regnum (gdbarch,
525                                                              fs->regs.cfa_reg,
526                                                              eh_frame_p);
527               fs->regs.cfa_how = CFA_REG_OFFSET;
528               break;
529
530             case DW_CFA_def_cfa_offset:
531               insn_ptr = read_uleb128 (insn_ptr, insn_end, &utmp);
532
533               if (fs->armcc_cfa_offsets_sf)
534                 utmp *= fs->data_align;
535
536               fs->regs.cfa_offset = utmp;
537               /* cfa_how deliberately not set.  */
538               break;
539
540             case DW_CFA_nop:
541               break;
542
543             case DW_CFA_def_cfa_expression:
544               insn_ptr = read_uleb128 (insn_ptr, insn_end,
545                                        &fs->regs.cfa_exp_len);
546               fs->regs.cfa_exp = insn_ptr;
547               fs->regs.cfa_how = CFA_EXP;
548               insn_ptr += fs->regs.cfa_exp_len;
549               break;
550
551             case DW_CFA_expression:
552               insn_ptr = read_uleb128 (insn_ptr, insn_end, &reg);
553               reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p);
554               dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
555               insn_ptr = read_uleb128 (insn_ptr, insn_end, &utmp);
556               fs->regs.reg[reg].loc.exp = insn_ptr;
557               fs->regs.reg[reg].exp_len = utmp;
558               fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_EXP;
559               insn_ptr += utmp;
560               break;
561
562             case DW_CFA_offset_extended_sf:
563               insn_ptr = read_uleb128 (insn_ptr, insn_end, &reg);
564               reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p);
565               insn_ptr = read_sleb128 (insn_ptr, insn_end, &offset);
566               offset *= fs->data_align;
567               dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
568               fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_OFFSET;
569               fs->regs.reg[reg].loc.offset = offset;
570               break;
571
572             case DW_CFA_val_offset:
573               insn_ptr = read_uleb128 (insn_ptr, insn_end, &reg);
574               dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
575               insn_ptr = read_uleb128 (insn_ptr, insn_end, &utmp);
576               offset = utmp * fs->data_align;
577               fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_VAL_OFFSET;
578               fs->regs.reg[reg].loc.offset = offset;
579               break;
580
581             case DW_CFA_val_offset_sf:
582               insn_ptr = read_uleb128 (insn_ptr, insn_end, &reg);
583               dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
584               insn_ptr = read_sleb128 (insn_ptr, insn_end, &offset);
585               offset *= fs->data_align;
586               fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_VAL_OFFSET;
587               fs->regs.reg[reg].loc.offset = offset;
588               break;
589
590             case DW_CFA_val_expression:
591               insn_ptr = read_uleb128 (insn_ptr, insn_end, &reg);
592               dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
593               insn_ptr = read_uleb128 (insn_ptr, insn_end, &utmp);
594               fs->regs.reg[reg].loc.exp = insn_ptr;
595               fs->regs.reg[reg].exp_len = utmp;
596               fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_VAL_EXP;
597               insn_ptr += utmp;
598               break;
599
600             case DW_CFA_def_cfa_sf:
601               insn_ptr = read_uleb128 (insn_ptr, insn_end, &fs->regs.cfa_reg);
602               fs->regs.cfa_reg = dwarf2_frame_adjust_regnum (gdbarch,
603                                                              fs->regs.cfa_reg,
604                                                              eh_frame_p);
605               insn_ptr = read_sleb128 (insn_ptr, insn_end, &offset);
606               fs->regs.cfa_offset = offset * fs->data_align;
607               fs->regs.cfa_how = CFA_REG_OFFSET;
608               break;
609
610             case DW_CFA_def_cfa_offset_sf:
611               insn_ptr = read_sleb128 (insn_ptr, insn_end, &offset);
612               fs->regs.cfa_offset = offset * fs->data_align;
613               /* cfa_how deliberately not set.  */
614               break;
615
616             case DW_CFA_GNU_window_save:
617               /* This is SPARC-specific code, and contains hard-coded
618                  constants for the register numbering scheme used by
619                  GCC.  Rather than having a architecture-specific
620                  operation that's only ever used by a single
621                  architecture, we provide the implementation here.
622                  Incidentally that's what GCC does too in its
623                  unwinder.  */
624               {
625                 int size = register_size (gdbarch, 0);
626                 dwarf2_frame_state_alloc_regs (&fs->regs, 32);
627                 for (reg = 8; reg < 16; reg++)
628                   {
629                     fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_REG;
630                     fs->regs.reg[reg].loc.reg = reg + 16;
631                   }
632                 for (reg = 16; reg < 32; reg++)
633                   {
634                     fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_OFFSET;
635                     fs->regs.reg[reg].loc.offset = (reg - 16) * size;
636                   }
637               }
638               break;
639
640             case DW_CFA_GNU_args_size:
641               /* Ignored.  */
642               insn_ptr = read_uleb128 (insn_ptr, insn_end, &utmp);
643               break;
644
645             case DW_CFA_GNU_negative_offset_extended:
646               insn_ptr = read_uleb128 (insn_ptr, insn_end, &reg);
647               reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p);
648               insn_ptr = read_uleb128 (insn_ptr, insn_end, &offset);
649               offset *= fs->data_align;
650               dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
651               fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_OFFSET;
652               fs->regs.reg[reg].loc.offset = -offset;
653               break;
654
655             default:
656               internal_error (__FILE__, __LINE__, _("Unknown CFI encountered."));
657             }
658         }
659     }
660
661   /* Don't allow remember/restore between CIE and FDE programs.  */
662   dwarf2_frame_state_free_regs (fs->regs.prev);
663   fs->regs.prev = NULL;
664 }
665 \f
666
667 /* Architecture-specific operations.  */
668
669 /* Per-architecture data key.  */
670 static struct gdbarch_data *dwarf2_frame_data;
671
672 struct dwarf2_frame_ops
673 {
674   /* Pre-initialize the register state REG for register REGNUM.  */
675   void (*init_reg) (struct gdbarch *, int, struct dwarf2_frame_state_reg *,
676                     struct frame_info *);
677
678   /* Check whether the THIS_FRAME is a signal trampoline.  */
679   int (*signal_frame_p) (struct gdbarch *, struct frame_info *);
680
681   /* Convert .eh_frame register number to DWARF register number, or
682      adjust .debug_frame register number.  */
683   int (*adjust_regnum) (struct gdbarch *, int, int);
684 };
685
686 /* Default architecture-specific register state initialization
687    function.  */
688
689 static void
690 dwarf2_frame_default_init_reg (struct gdbarch *gdbarch, int regnum,
691                                struct dwarf2_frame_state_reg *reg,
692                                struct frame_info *this_frame)
693 {
694   /* If we have a register that acts as a program counter, mark it as
695      a destination for the return address.  If we have a register that
696      serves as the stack pointer, arrange for it to be filled with the
697      call frame address (CFA).  The other registers are marked as
698      unspecified.
699
700      We copy the return address to the program counter, since many
701      parts in GDB assume that it is possible to get the return address
702      by unwinding the program counter register.  However, on ISA's
703      with a dedicated return address register, the CFI usually only
704      contains information to unwind that return address register.
705
706      The reason we're treating the stack pointer special here is
707      because in many cases GCC doesn't emit CFI for the stack pointer
708      and implicitly assumes that it is equal to the CFA.  This makes
709      some sense since the DWARF specification (version 3, draft 8,
710      p. 102) says that:
711
712      "Typically, the CFA is defined to be the value of the stack
713      pointer at the call site in the previous frame (which may be
714      different from its value on entry to the current frame)."
715
716      However, this isn't true for all platforms supported by GCC
717      (e.g. IBM S/390 and zSeries).  Those architectures should provide
718      their own architecture-specific initialization function.  */
719
720   if (regnum == gdbarch_pc_regnum (gdbarch))
721     reg->how = DWARF2_FRAME_REG_RA;
722   else if (regnum == gdbarch_sp_regnum (gdbarch))
723     reg->how = DWARF2_FRAME_REG_CFA;
724 }
725
726 /* Return a default for the architecture-specific operations.  */
727
728 static void *
729 dwarf2_frame_init (struct obstack *obstack)
730 {
731   struct dwarf2_frame_ops *ops;
732   
733   ops = OBSTACK_ZALLOC (obstack, struct dwarf2_frame_ops);
734   ops->init_reg = dwarf2_frame_default_init_reg;
735   return ops;
736 }
737
738 /* Set the architecture-specific register state initialization
739    function for GDBARCH to INIT_REG.  */
740
741 void
742 dwarf2_frame_set_init_reg (struct gdbarch *gdbarch,
743                            void (*init_reg) (struct gdbarch *, int,
744                                              struct dwarf2_frame_state_reg *,
745                                              struct frame_info *))
746 {
747   struct dwarf2_frame_ops *ops = gdbarch_data (gdbarch, dwarf2_frame_data);
748
749   ops->init_reg = init_reg;
750 }
751
752 /* Pre-initialize the register state REG for register REGNUM.  */
753
754 static void
755 dwarf2_frame_init_reg (struct gdbarch *gdbarch, int regnum,
756                        struct dwarf2_frame_state_reg *reg,
757                        struct frame_info *this_frame)
758 {
759   struct dwarf2_frame_ops *ops = gdbarch_data (gdbarch, dwarf2_frame_data);
760
761   ops->init_reg (gdbarch, regnum, reg, this_frame);
762 }
763
764 /* Set the architecture-specific signal trampoline recognition
765    function for GDBARCH to SIGNAL_FRAME_P.  */
766
767 void
768 dwarf2_frame_set_signal_frame_p (struct gdbarch *gdbarch,
769                                  int (*signal_frame_p) (struct gdbarch *,
770                                                         struct frame_info *))
771 {
772   struct dwarf2_frame_ops *ops = gdbarch_data (gdbarch, dwarf2_frame_data);
773
774   ops->signal_frame_p = signal_frame_p;
775 }
776
777 /* Query the architecture-specific signal frame recognizer for
778    THIS_FRAME.  */
779
780 static int
781 dwarf2_frame_signal_frame_p (struct gdbarch *gdbarch,
782                              struct frame_info *this_frame)
783 {
784   struct dwarf2_frame_ops *ops = gdbarch_data (gdbarch, dwarf2_frame_data);
785
786   if (ops->signal_frame_p == NULL)
787     return 0;
788   return ops->signal_frame_p (gdbarch, this_frame);
789 }
790
791 /* Set the architecture-specific adjustment of .eh_frame and .debug_frame
792    register numbers.  */
793
794 void
795 dwarf2_frame_set_adjust_regnum (struct gdbarch *gdbarch,
796                                 int (*adjust_regnum) (struct gdbarch *,
797                                                       int, int))
798 {
799   struct dwarf2_frame_ops *ops = gdbarch_data (gdbarch, dwarf2_frame_data);
800
801   ops->adjust_regnum = adjust_regnum;
802 }
803
804 /* Translate a .eh_frame register to DWARF register, or adjust a .debug_frame
805    register.  */
806
807 static int
808 dwarf2_frame_adjust_regnum (struct gdbarch *gdbarch, int regnum, int eh_frame_p)
809 {
810   struct dwarf2_frame_ops *ops = gdbarch_data (gdbarch, dwarf2_frame_data);
811
812   if (ops->adjust_regnum == NULL)
813     return regnum;
814   return ops->adjust_regnum (gdbarch, regnum, eh_frame_p);
815 }
816
817 static void
818 dwarf2_frame_find_quirks (struct dwarf2_frame_state *fs,
819                           struct dwarf2_fde *fde)
820 {
821   static const char *arm_idents[] = {
822     "ARM C Compiler, ADS",
823     "Thumb C Compiler, ADS",
824     "ARM C++ Compiler, ADS",
825     "Thumb C++ Compiler, ADS",
826     "ARM/Thumb C/C++ Compiler, RVCT"
827   };
828   int i;
829
830   struct symtab *s;
831
832   s = find_pc_symtab (fs->pc);
833   if (s == NULL || s->producer == NULL)
834     return;
835
836   for (i = 0; i < ARRAY_SIZE (arm_idents); i++)
837     if (strncmp (s->producer, arm_idents[i], strlen (arm_idents[i])) == 0)
838       {
839         if (fde->cie->version == 1)
840           fs->armcc_cfa_offsets_sf = 1;
841
842         if (fde->cie->version == 1)
843           fs->armcc_cfa_offsets_reversed = 1;
844
845         /* The reversed offset problem is present in some compilers
846            using DWARF3, but it was eventually fixed.  Check the ARM
847            defined augmentations, which are in the format "armcc" followed
848            by a list of one-character options.  The "+" option means
849            this problem is fixed (no quirk needed).  If the armcc
850            augmentation is missing, the quirk is needed.  */
851         if (fde->cie->version == 3
852             && (strncmp (fde->cie->augmentation, "armcc", 5) != 0
853                 || strchr (fde->cie->augmentation + 5, '+') == NULL))
854           fs->armcc_cfa_offsets_reversed = 1;
855
856         return;
857       }
858 }
859 \f
860
861 struct dwarf2_frame_cache
862 {
863   /* DWARF Call Frame Address.  */
864   CORE_ADDR cfa;
865
866   /* Set if the return address column was marked as undefined.  */
867   int undefined_retaddr;
868
869   /* Saved registers, indexed by GDB register number, not by DWARF
870      register number.  */
871   struct dwarf2_frame_state_reg *reg;
872
873   /* Return address register.  */
874   struct dwarf2_frame_state_reg retaddr_reg;
875
876   /* Target address size in bytes.  */
877   int addr_size;
878 };
879
880 static struct dwarf2_frame_cache *
881 dwarf2_frame_cache (struct frame_info *this_frame, void **this_cache)
882 {
883   struct cleanup *old_chain;
884   struct gdbarch *gdbarch = get_frame_arch (this_frame);
885   const int num_regs = gdbarch_num_regs (gdbarch)
886                        + gdbarch_num_pseudo_regs (gdbarch);
887   struct dwarf2_frame_cache *cache;
888   struct dwarf2_frame_state *fs;
889   struct dwarf2_fde *fde;
890
891   if (*this_cache)
892     return *this_cache;
893
894   /* Allocate a new cache.  */
895   cache = FRAME_OBSTACK_ZALLOC (struct dwarf2_frame_cache);
896   cache->reg = FRAME_OBSTACK_CALLOC (num_regs, struct dwarf2_frame_state_reg);
897
898   /* Allocate and initialize the frame state.  */
899   fs = XMALLOC (struct dwarf2_frame_state);
900   memset (fs, 0, sizeof (struct dwarf2_frame_state));
901   old_chain = make_cleanup (dwarf2_frame_state_free, fs);
902
903   /* Unwind the PC.
904
905      Note that if the next frame is never supposed to return (i.e. a call
906      to abort), the compiler might optimize away the instruction at
907      its return address.  As a result the return address will
908      point at some random instruction, and the CFI for that
909      instruction is probably worthless to us.  GCC's unwinder solves
910      this problem by substracting 1 from the return address to get an
911      address in the middle of a presumed call instruction (or the
912      instruction in the associated delay slot).  This should only be
913      done for "normal" frames and not for resume-type frames (signal
914      handlers, sentinel frames, dummy frames).  The function
915      get_frame_address_in_block does just this.  It's not clear how
916      reliable the method is though; there is the potential for the
917      register state pre-call being different to that on return.  */
918   fs->pc = get_frame_address_in_block (this_frame);
919
920   /* Find the correct FDE.  */
921   fde = dwarf2_frame_find_fde (&fs->pc);
922   gdb_assert (fde != NULL);
923
924   /* Extract any interesting information from the CIE.  */
925   fs->data_align = fde->cie->data_alignment_factor;
926   fs->code_align = fde->cie->code_alignment_factor;
927   fs->retaddr_column = fde->cie->return_address_register;
928   cache->addr_size = fde->cie->addr_size;
929
930   /* Check for "quirks" - known bugs in producers.  */
931   dwarf2_frame_find_quirks (fs, fde);
932
933   /* First decode all the insns in the CIE.  */
934   execute_cfa_program (fde, fde->cie->initial_instructions,
935                        fde->cie->end, this_frame, fs);
936
937   /* Save the initialized register set.  */
938   fs->initial = fs->regs;
939   fs->initial.reg = dwarf2_frame_state_copy_regs (&fs->regs);
940
941   /* Then decode the insns in the FDE up to our target PC.  */
942   execute_cfa_program (fde, fde->instructions, fde->end, this_frame, fs);
943
944   /* Calculate the CFA.  */
945   switch (fs->regs.cfa_how)
946     {
947     case CFA_REG_OFFSET:
948       cache->cfa = read_reg (this_frame, fs->regs.cfa_reg);
949       if (fs->armcc_cfa_offsets_reversed)
950         cache->cfa -= fs->regs.cfa_offset;
951       else
952         cache->cfa += fs->regs.cfa_offset;
953       break;
954
955     case CFA_EXP:
956       cache->cfa =
957         execute_stack_op (fs->regs.cfa_exp, fs->regs.cfa_exp_len,
958                           cache->addr_size, this_frame, 0);
959       break;
960
961     default:
962       internal_error (__FILE__, __LINE__, _("Unknown CFA rule."));
963     }
964
965   /* Initialize the register state.  */
966   {
967     int regnum;
968
969     for (regnum = 0; regnum < num_regs; regnum++)
970       dwarf2_frame_init_reg (gdbarch, regnum, &cache->reg[regnum], this_frame);
971   }
972
973   /* Go through the DWARF2 CFI generated table and save its register
974      location information in the cache.  Note that we don't skip the
975      return address column; it's perfectly all right for it to
976      correspond to a real register.  If it doesn't correspond to a
977      real register, or if we shouldn't treat it as such,
978      gdbarch_dwarf2_reg_to_regnum should be defined to return a number outside
979      the range [0, gdbarch_num_regs).  */
980   {
981     int column;         /* CFI speak for "register number".  */
982
983     for (column = 0; column < fs->regs.num_regs; column++)
984       {
985         /* Use the GDB register number as the destination index.  */
986         int regnum = gdbarch_dwarf2_reg_to_regnum (gdbarch, column);
987
988         /* If there's no corresponding GDB register, ignore it.  */
989         if (regnum < 0 || regnum >= num_regs)
990           continue;
991
992         /* NOTE: cagney/2003-09-05: CFI should specify the disposition
993            of all debug info registers.  If it doesn't, complain (but
994            not too loudly).  It turns out that GCC assumes that an
995            unspecified register implies "same value" when CFI (draft
996            7) specifies nothing at all.  Such a register could equally
997            be interpreted as "undefined".  Also note that this check
998            isn't sufficient; it only checks that all registers in the
999            range [0 .. max column] are specified, and won't detect
1000            problems when a debug info register falls outside of the
1001            table.  We need a way of iterating through all the valid
1002            DWARF2 register numbers.  */
1003         if (fs->regs.reg[column].how == DWARF2_FRAME_REG_UNSPECIFIED)
1004           {
1005             if (cache->reg[regnum].how == DWARF2_FRAME_REG_UNSPECIFIED)
1006               complaint (&symfile_complaints, _("\
1007 incomplete CFI data; unspecified registers (e.g., %s) at %s"),
1008                          gdbarch_register_name (gdbarch, regnum),
1009                          paddress (gdbarch, fs->pc));
1010           }
1011         else
1012           cache->reg[regnum] = fs->regs.reg[column];
1013       }
1014   }
1015
1016   /* Eliminate any DWARF2_FRAME_REG_RA rules, and save the information
1017      we need for evaluating DWARF2_FRAME_REG_RA_OFFSET rules.  */
1018   {
1019     int regnum;
1020
1021     for (regnum = 0; regnum < num_regs; regnum++)
1022       {
1023         if (cache->reg[regnum].how == DWARF2_FRAME_REG_RA
1024             || cache->reg[regnum].how == DWARF2_FRAME_REG_RA_OFFSET)
1025           {
1026             struct dwarf2_frame_state_reg *retaddr_reg =
1027               &fs->regs.reg[fs->retaddr_column];
1028
1029             /* It seems rather bizarre to specify an "empty" column as
1030                the return adress column.  However, this is exactly
1031                what GCC does on some targets.  It turns out that GCC
1032                assumes that the return address can be found in the
1033                register corresponding to the return address column.
1034                Incidentally, that's how we should treat a return
1035                address column specifying "same value" too.  */
1036             if (fs->retaddr_column < fs->regs.num_regs
1037                 && retaddr_reg->how != DWARF2_FRAME_REG_UNSPECIFIED
1038                 && retaddr_reg->how != DWARF2_FRAME_REG_SAME_VALUE)
1039               {
1040                 if (cache->reg[regnum].how == DWARF2_FRAME_REG_RA)
1041                   cache->reg[regnum] = *retaddr_reg;
1042                 else
1043                   cache->retaddr_reg = *retaddr_reg;
1044               }
1045             else
1046               {
1047                 if (cache->reg[regnum].how == DWARF2_FRAME_REG_RA)
1048                   {
1049                     cache->reg[regnum].loc.reg = fs->retaddr_column;
1050                     cache->reg[regnum].how = DWARF2_FRAME_REG_SAVED_REG;
1051                   }
1052                 else
1053                   {
1054                     cache->retaddr_reg.loc.reg = fs->retaddr_column;
1055                     cache->retaddr_reg.how = DWARF2_FRAME_REG_SAVED_REG;
1056                   }
1057               }
1058           }
1059       }
1060   }
1061
1062   if (fs->retaddr_column < fs->regs.num_regs
1063       && fs->regs.reg[fs->retaddr_column].how == DWARF2_FRAME_REG_UNDEFINED)
1064     cache->undefined_retaddr = 1;
1065
1066   do_cleanups (old_chain);
1067
1068   *this_cache = cache;
1069   return cache;
1070 }
1071
1072 static void
1073 dwarf2_frame_this_id (struct frame_info *this_frame, void **this_cache,
1074                       struct frame_id *this_id)
1075 {
1076   struct dwarf2_frame_cache *cache =
1077     dwarf2_frame_cache (this_frame, this_cache);
1078
1079   if (cache->undefined_retaddr)
1080     return;
1081
1082   (*this_id) = frame_id_build (cache->cfa, get_frame_func (this_frame));
1083 }
1084
1085 static struct value *
1086 dwarf2_frame_prev_register (struct frame_info *this_frame, void **this_cache,
1087                             int regnum)
1088 {
1089   struct gdbarch *gdbarch = get_frame_arch (this_frame);
1090   struct dwarf2_frame_cache *cache =
1091     dwarf2_frame_cache (this_frame, this_cache);
1092   CORE_ADDR addr;
1093   int realnum;
1094
1095   switch (cache->reg[regnum].how)
1096     {
1097     case DWARF2_FRAME_REG_UNDEFINED:
1098       /* If CFI explicitly specified that the value isn't defined,
1099          mark it as optimized away; the value isn't available.  */
1100       return frame_unwind_got_optimized (this_frame, regnum);
1101
1102     case DWARF2_FRAME_REG_SAVED_OFFSET:
1103       addr = cache->cfa + cache->reg[regnum].loc.offset;
1104       return frame_unwind_got_memory (this_frame, regnum, addr);
1105
1106     case DWARF2_FRAME_REG_SAVED_REG:
1107       realnum
1108         = gdbarch_dwarf2_reg_to_regnum (gdbarch, cache->reg[regnum].loc.reg);
1109       return frame_unwind_got_register (this_frame, regnum, realnum);
1110
1111     case DWARF2_FRAME_REG_SAVED_EXP:
1112       addr = execute_stack_op (cache->reg[regnum].loc.exp,
1113                                cache->reg[regnum].exp_len,
1114                                cache->addr_size, this_frame, cache->cfa);
1115       return frame_unwind_got_memory (this_frame, regnum, addr);
1116
1117     case DWARF2_FRAME_REG_SAVED_VAL_OFFSET:
1118       addr = cache->cfa + cache->reg[regnum].loc.offset;
1119       return frame_unwind_got_constant (this_frame, regnum, addr);
1120
1121     case DWARF2_FRAME_REG_SAVED_VAL_EXP:
1122       addr = execute_stack_op (cache->reg[regnum].loc.exp,
1123                                cache->reg[regnum].exp_len,
1124                                cache->addr_size, this_frame, cache->cfa);
1125       return frame_unwind_got_constant (this_frame, regnum, addr);
1126
1127     case DWARF2_FRAME_REG_UNSPECIFIED:
1128       /* GCC, in its infinite wisdom decided to not provide unwind
1129          information for registers that are "same value".  Since
1130          DWARF2 (3 draft 7) doesn't define such behavior, said
1131          registers are actually undefined (which is different to CFI
1132          "undefined").  Code above issues a complaint about this.
1133          Here just fudge the books, assume GCC, and that the value is
1134          more inner on the stack.  */
1135       return frame_unwind_got_register (this_frame, regnum, regnum);
1136
1137     case DWARF2_FRAME_REG_SAME_VALUE:
1138       return frame_unwind_got_register (this_frame, regnum, regnum);
1139
1140     case DWARF2_FRAME_REG_CFA:
1141       return frame_unwind_got_address (this_frame, regnum, cache->cfa);
1142
1143     case DWARF2_FRAME_REG_CFA_OFFSET:
1144       addr = cache->cfa + cache->reg[regnum].loc.offset;
1145       return frame_unwind_got_address (this_frame, regnum, addr);
1146
1147     case DWARF2_FRAME_REG_RA_OFFSET:
1148       addr = cache->reg[regnum].loc.offset;
1149       regnum = gdbarch_dwarf2_reg_to_regnum
1150         (gdbarch, cache->retaddr_reg.loc.reg);
1151       addr += get_frame_register_unsigned (this_frame, regnum);
1152       return frame_unwind_got_address (this_frame, regnum, addr);
1153
1154     case DWARF2_FRAME_REG_FN:
1155       return cache->reg[regnum].loc.fn (this_frame, this_cache, regnum);
1156
1157     default:
1158       internal_error (__FILE__, __LINE__, _("Unknown register rule."));
1159     }
1160 }
1161
1162 static int
1163 dwarf2_frame_sniffer (const struct frame_unwind *self,
1164                       struct frame_info *this_frame, void **this_cache)
1165 {
1166   /* Grab an address that is guarenteed to reside somewhere within the
1167      function.  get_frame_pc(), with a no-return next function, can
1168      end up returning something past the end of this function's body.
1169      If the frame we're sniffing for is a signal frame whose start
1170      address is placed on the stack by the OS, its FDE must
1171      extend one byte before its start address or we could potentially
1172      select the FDE of the previous function.  */
1173   CORE_ADDR block_addr = get_frame_address_in_block (this_frame);
1174   struct dwarf2_fde *fde = dwarf2_frame_find_fde (&block_addr);
1175   if (!fde)
1176     return 0;
1177
1178   /* On some targets, signal trampolines may have unwind information.
1179      We need to recognize them so that we set the frame type
1180      correctly.  */
1181
1182   if (fde->cie->signal_frame
1183       || dwarf2_frame_signal_frame_p (get_frame_arch (this_frame),
1184                                       this_frame))
1185     return self->type == SIGTRAMP_FRAME;
1186
1187   return self->type != SIGTRAMP_FRAME;
1188 }
1189
1190 static const struct frame_unwind dwarf2_frame_unwind =
1191 {
1192   NORMAL_FRAME,
1193   dwarf2_frame_this_id,
1194   dwarf2_frame_prev_register,
1195   NULL,
1196   dwarf2_frame_sniffer
1197 };
1198
1199 static const struct frame_unwind dwarf2_signal_frame_unwind =
1200 {
1201   SIGTRAMP_FRAME,
1202   dwarf2_frame_this_id,
1203   dwarf2_frame_prev_register,
1204   NULL,
1205   dwarf2_frame_sniffer
1206 };
1207
1208 /* Append the DWARF-2 frame unwinders to GDBARCH's list.  */
1209
1210 void
1211 dwarf2_append_unwinders (struct gdbarch *gdbarch)
1212 {
1213   frame_unwind_append_unwinder (gdbarch, &dwarf2_frame_unwind);
1214   frame_unwind_append_unwinder (gdbarch, &dwarf2_signal_frame_unwind);
1215 }
1216 \f
1217
1218 /* There is no explicitly defined relationship between the CFA and the
1219    location of frame's local variables and arguments/parameters.
1220    Therefore, frame base methods on this page should probably only be
1221    used as a last resort, just to avoid printing total garbage as a
1222    response to the "info frame" command.  */
1223
1224 static CORE_ADDR
1225 dwarf2_frame_base_address (struct frame_info *this_frame, void **this_cache)
1226 {
1227   struct dwarf2_frame_cache *cache =
1228     dwarf2_frame_cache (this_frame, this_cache);
1229
1230   return cache->cfa;
1231 }
1232
1233 static const struct frame_base dwarf2_frame_base =
1234 {
1235   &dwarf2_frame_unwind,
1236   dwarf2_frame_base_address,
1237   dwarf2_frame_base_address,
1238   dwarf2_frame_base_address
1239 };
1240
1241 const struct frame_base *
1242 dwarf2_frame_base_sniffer (struct frame_info *this_frame)
1243 {
1244   CORE_ADDR block_addr = get_frame_address_in_block (this_frame);
1245   if (dwarf2_frame_find_fde (&block_addr))
1246     return &dwarf2_frame_base;
1247
1248   return NULL;
1249 }
1250 \f
1251 const struct objfile_data *dwarf2_frame_objfile_data;
1252
1253 static unsigned int
1254 read_1_byte (bfd *abfd, gdb_byte *buf)
1255 {
1256   return bfd_get_8 (abfd, buf);
1257 }
1258
1259 static unsigned int
1260 read_4_bytes (bfd *abfd, gdb_byte *buf)
1261 {
1262   return bfd_get_32 (abfd, buf);
1263 }
1264
1265 static ULONGEST
1266 read_8_bytes (bfd *abfd, gdb_byte *buf)
1267 {
1268   return bfd_get_64 (abfd, buf);
1269 }
1270
1271 static ULONGEST
1272 read_unsigned_leb128 (bfd *abfd, gdb_byte *buf, unsigned int *bytes_read_ptr)
1273 {
1274   ULONGEST result;
1275   unsigned int num_read;
1276   int shift;
1277   gdb_byte byte;
1278
1279   result = 0;
1280   shift = 0;
1281   num_read = 0;
1282
1283   do
1284     {
1285       byte = bfd_get_8 (abfd, (bfd_byte *) buf);
1286       buf++;
1287       num_read++;
1288       result |= ((byte & 0x7f) << shift);
1289       shift += 7;
1290     }
1291   while (byte & 0x80);
1292
1293   *bytes_read_ptr = num_read;
1294
1295   return result;
1296 }
1297
1298 static LONGEST
1299 read_signed_leb128 (bfd *abfd, gdb_byte *buf, unsigned int *bytes_read_ptr)
1300 {
1301   LONGEST result;
1302   int shift;
1303   unsigned int num_read;
1304   gdb_byte byte;
1305
1306   result = 0;
1307   shift = 0;
1308   num_read = 0;
1309
1310   do
1311     {
1312       byte = bfd_get_8 (abfd, (bfd_byte *) buf);
1313       buf++;
1314       num_read++;
1315       result |= ((byte & 0x7f) << shift);
1316       shift += 7;
1317     }
1318   while (byte & 0x80);
1319
1320   if (shift < 8 * sizeof (result) && (byte & 0x40))
1321     result |= -(((LONGEST)1) << shift);
1322
1323   *bytes_read_ptr = num_read;
1324
1325   return result;
1326 }
1327
1328 static ULONGEST
1329 read_initial_length (bfd *abfd, gdb_byte *buf, unsigned int *bytes_read_ptr)
1330 {
1331   LONGEST result;
1332
1333   result = bfd_get_32 (abfd, buf);
1334   if (result == 0xffffffff)
1335     {
1336       result = bfd_get_64 (abfd, buf + 4);
1337       *bytes_read_ptr = 12;
1338     }
1339   else
1340     *bytes_read_ptr = 4;
1341
1342   return result;
1343 }
1344 \f
1345
1346 /* Pointer encoding helper functions.  */
1347
1348 /* GCC supports exception handling based on DWARF2 CFI.  However, for
1349    technical reasons, it encodes addresses in its FDE's in a different
1350    way.  Several "pointer encodings" are supported.  The encoding
1351    that's used for a particular FDE is determined by the 'R'
1352    augmentation in the associated CIE.  The argument of this
1353    augmentation is a single byte.  
1354
1355    The address can be encoded as 2 bytes, 4 bytes, 8 bytes, or as a
1356    LEB128.  This is encoded in bits 0, 1 and 2.  Bit 3 encodes whether
1357    the address is signed or unsigned.  Bits 4, 5 and 6 encode how the
1358    address should be interpreted (absolute, relative to the current
1359    position in the FDE, ...).  Bit 7, indicates that the address
1360    should be dereferenced.  */
1361
1362 static gdb_byte
1363 encoding_for_size (unsigned int size)
1364 {
1365   switch (size)
1366     {
1367     case 2:
1368       return DW_EH_PE_udata2;
1369     case 4:
1370       return DW_EH_PE_udata4;
1371     case 8:
1372       return DW_EH_PE_udata8;
1373     default:
1374       internal_error (__FILE__, __LINE__, _("Unsupported address size"));
1375     }
1376 }
1377
1378 static CORE_ADDR
1379 read_encoded_value (struct comp_unit *unit, gdb_byte encoding,
1380                     int ptr_len, gdb_byte *buf, unsigned int *bytes_read_ptr,
1381                     CORE_ADDR func_base)
1382 {
1383   ptrdiff_t offset;
1384   CORE_ADDR base;
1385
1386   /* GCC currently doesn't generate DW_EH_PE_indirect encodings for
1387      FDE's.  */
1388   if (encoding & DW_EH_PE_indirect)
1389     internal_error (__FILE__, __LINE__, 
1390                     _("Unsupported encoding: DW_EH_PE_indirect"));
1391
1392   *bytes_read_ptr = 0;
1393
1394   switch (encoding & 0x70)
1395     {
1396     case DW_EH_PE_absptr:
1397       base = 0;
1398       break;
1399     case DW_EH_PE_pcrel:
1400       base = bfd_get_section_vma (unit->abfd, unit->dwarf_frame_section);
1401       base += (buf - unit->dwarf_frame_buffer);
1402       break;
1403     case DW_EH_PE_datarel:
1404       base = unit->dbase;
1405       break;
1406     case DW_EH_PE_textrel:
1407       base = unit->tbase;
1408       break;
1409     case DW_EH_PE_funcrel:
1410       base = func_base;
1411       break;
1412     case DW_EH_PE_aligned:
1413       base = 0;
1414       offset = buf - unit->dwarf_frame_buffer;
1415       if ((offset % ptr_len) != 0)
1416         {
1417           *bytes_read_ptr = ptr_len - (offset % ptr_len);
1418           buf += *bytes_read_ptr;
1419         }
1420       break;
1421     default:
1422       internal_error (__FILE__, __LINE__, _("Invalid or unsupported encoding"));
1423     }
1424
1425   if ((encoding & 0x07) == 0x00)
1426     {
1427       encoding |= encoding_for_size (ptr_len);
1428       if (bfd_get_sign_extend_vma (unit->abfd))
1429         encoding |= DW_EH_PE_signed;
1430     }
1431
1432   switch (encoding & 0x0f)
1433     {
1434     case DW_EH_PE_uleb128:
1435       {
1436         ULONGEST value;
1437         gdb_byte *end_buf = buf + (sizeof (value) + 1) * 8 / 7;
1438         *bytes_read_ptr += read_uleb128 (buf, end_buf, &value) - buf;
1439         return base + value;
1440       }
1441     case DW_EH_PE_udata2:
1442       *bytes_read_ptr += 2;
1443       return (base + bfd_get_16 (unit->abfd, (bfd_byte *) buf));
1444     case DW_EH_PE_udata4:
1445       *bytes_read_ptr += 4;
1446       return (base + bfd_get_32 (unit->abfd, (bfd_byte *) buf));
1447     case DW_EH_PE_udata8:
1448       *bytes_read_ptr += 8;
1449       return (base + bfd_get_64 (unit->abfd, (bfd_byte *) buf));
1450     case DW_EH_PE_sleb128:
1451       {
1452         LONGEST value;
1453         gdb_byte *end_buf = buf + (sizeof (value) + 1) * 8 / 7;
1454         *bytes_read_ptr += read_sleb128 (buf, end_buf, &value) - buf;
1455         return base + value;
1456       }
1457     case DW_EH_PE_sdata2:
1458       *bytes_read_ptr += 2;
1459       return (base + bfd_get_signed_16 (unit->abfd, (bfd_byte *) buf));
1460     case DW_EH_PE_sdata4:
1461       *bytes_read_ptr += 4;
1462       return (base + bfd_get_signed_32 (unit->abfd, (bfd_byte *) buf));
1463     case DW_EH_PE_sdata8:
1464       *bytes_read_ptr += 8;
1465       return (base + bfd_get_signed_64 (unit->abfd, (bfd_byte *) buf));
1466     default:
1467       internal_error (__FILE__, __LINE__, _("Invalid or unsupported encoding"));
1468     }
1469 }
1470 \f
1471
1472 static int
1473 bsearch_cie_cmp (const void *key, const void *element)
1474 {
1475   ULONGEST cie_pointer = *(ULONGEST *) key;
1476   struct dwarf2_cie *cie = *(struct dwarf2_cie **) element;
1477
1478   if (cie_pointer == cie->cie_pointer)
1479     return 0;
1480
1481   return (cie_pointer < cie->cie_pointer) ? -1 : 1;
1482 }
1483
1484 /* Find CIE with the given CIE_POINTER in CIE_TABLE.  */
1485 static struct dwarf2_cie *
1486 find_cie (struct dwarf2_cie_table *cie_table, ULONGEST cie_pointer)
1487 {
1488   struct dwarf2_cie **p_cie;
1489
1490   p_cie = bsearch (&cie_pointer, cie_table->entries, cie_table->num_entries,
1491                    sizeof (cie_table->entries[0]), bsearch_cie_cmp);
1492   if (p_cie != NULL)
1493     return *p_cie;
1494   return NULL;
1495 }
1496
1497 /* Add a pointer to new CIE to the CIE_TABLE, allocating space for it.  */
1498 static void
1499 add_cie (struct dwarf2_cie_table *cie_table, struct dwarf2_cie *cie)
1500 {
1501   const int n = cie_table->num_entries;
1502
1503   gdb_assert (n < 1
1504               || cie_table->entries[n - 1]->cie_pointer < cie->cie_pointer);
1505
1506   cie_table->entries =
1507       xrealloc (cie_table->entries, (n + 1) * sizeof (cie_table->entries[0]));
1508   cie_table->entries[n] = cie;
1509   cie_table->num_entries = n + 1;
1510 }
1511
1512 static int
1513 bsearch_fde_cmp (const void *key, const void *element)
1514 {
1515   CORE_ADDR seek_pc = *(CORE_ADDR *) key;
1516   struct dwarf2_fde *fde = *(struct dwarf2_fde **) element;
1517   if (seek_pc < fde->initial_location)
1518     return -1;
1519   if (seek_pc < fde->initial_location + fde->address_range)
1520     return 0;
1521   return 1;
1522 }
1523
1524 /* Find the FDE for *PC.  Return a pointer to the FDE, and store the
1525    inital location associated with it into *PC.  */
1526
1527 static struct dwarf2_fde *
1528 dwarf2_frame_find_fde (CORE_ADDR *pc)
1529 {
1530   struct objfile *objfile;
1531
1532   ALL_OBJFILES (objfile)
1533     {
1534       struct dwarf2_fde_table *fde_table;
1535       struct dwarf2_fde **p_fde;
1536       CORE_ADDR offset;
1537       CORE_ADDR seek_pc;
1538
1539       fde_table = objfile_data (objfile, dwarf2_frame_objfile_data);
1540       if (fde_table == NULL)
1541         continue;
1542
1543       gdb_assert (objfile->section_offsets);
1544       offset = ANOFFSET (objfile->section_offsets, SECT_OFF_TEXT (objfile));
1545
1546       gdb_assert (fde_table->num_entries > 0);
1547       if (*pc < offset + fde_table->entries[0]->initial_location)
1548         continue;
1549
1550       seek_pc = *pc - offset;
1551       p_fde = bsearch (&seek_pc, fde_table->entries, fde_table->num_entries,
1552                        sizeof (fde_table->entries[0]), bsearch_fde_cmp);
1553       if (p_fde != NULL)
1554         {
1555           *pc = (*p_fde)->initial_location + offset;
1556           return *p_fde;
1557         }
1558     }
1559   return NULL;
1560 }
1561
1562 /* Add a pointer to new FDE to the FDE_TABLE, allocating space for it.  */
1563 static void
1564 add_fde (struct dwarf2_fde_table *fde_table, struct dwarf2_fde *fde)
1565 {
1566   if (fde->address_range == 0)
1567     /* Discard useless FDEs.  */
1568     return;
1569
1570   fde_table->num_entries += 1;
1571   fde_table->entries =
1572       xrealloc (fde_table->entries,
1573                 fde_table->num_entries * sizeof (fde_table->entries[0]));
1574   fde_table->entries[fde_table->num_entries - 1] = fde;
1575 }
1576
1577 #ifdef CC_HAS_LONG_LONG
1578 #define DW64_CIE_ID 0xffffffffffffffffULL
1579 #else
1580 #define DW64_CIE_ID ~0
1581 #endif
1582
1583 static gdb_byte *decode_frame_entry (struct comp_unit *unit, gdb_byte *start,
1584                                      int eh_frame_p,
1585                                      struct dwarf2_cie_table *cie_table,
1586                                      struct dwarf2_fde_table *fde_table);
1587
1588 /* Decode the next CIE or FDE.  Return NULL if invalid input, otherwise
1589    the next byte to be processed.  */
1590 static gdb_byte *
1591 decode_frame_entry_1 (struct comp_unit *unit, gdb_byte *start, int eh_frame_p,
1592                       struct dwarf2_cie_table *cie_table,
1593                       struct dwarf2_fde_table *fde_table)
1594 {
1595   struct gdbarch *gdbarch = get_objfile_arch (unit->objfile);
1596   gdb_byte *buf, *end;
1597   LONGEST length;
1598   unsigned int bytes_read;
1599   int dwarf64_p;
1600   ULONGEST cie_id;
1601   ULONGEST cie_pointer;
1602
1603   buf = start;
1604   length = read_initial_length (unit->abfd, buf, &bytes_read);
1605   buf += bytes_read;
1606   end = buf + length;
1607
1608   /* Are we still within the section? */
1609   if (end > unit->dwarf_frame_buffer + unit->dwarf_frame_size)
1610     return NULL;
1611
1612   if (length == 0)
1613     return end;
1614
1615   /* Distinguish between 32 and 64-bit encoded frame info.  */
1616   dwarf64_p = (bytes_read == 12);
1617
1618   /* In a .eh_frame section, zero is used to distinguish CIEs from FDEs.  */
1619   if (eh_frame_p)
1620     cie_id = 0;
1621   else if (dwarf64_p)
1622     cie_id = DW64_CIE_ID;
1623   else
1624     cie_id = DW_CIE_ID;
1625
1626   if (dwarf64_p)
1627     {
1628       cie_pointer = read_8_bytes (unit->abfd, buf);
1629       buf += 8;
1630     }
1631   else
1632     {
1633       cie_pointer = read_4_bytes (unit->abfd, buf);
1634       buf += 4;
1635     }
1636
1637   if (cie_pointer == cie_id)
1638     {
1639       /* This is a CIE.  */
1640       struct dwarf2_cie *cie;
1641       char *augmentation;
1642       unsigned int cie_version;
1643
1644       /* Record the offset into the .debug_frame section of this CIE.  */
1645       cie_pointer = start - unit->dwarf_frame_buffer;
1646
1647       /* Check whether we've already read it.  */
1648       if (find_cie (cie_table, cie_pointer))
1649         return end;
1650
1651       cie = (struct dwarf2_cie *)
1652         obstack_alloc (&unit->objfile->objfile_obstack,
1653                        sizeof (struct dwarf2_cie));
1654       cie->initial_instructions = NULL;
1655       cie->cie_pointer = cie_pointer;
1656
1657       /* The encoding for FDE's in a normal .debug_frame section
1658          depends on the target address size.  */
1659       cie->encoding = DW_EH_PE_absptr;
1660
1661       /* The target address size.  For .eh_frame FDEs this is considered
1662          equal to the size of a target pointer.  For .dwarf_frame FDEs, 
1663          this is supposed to be the target address size from the associated
1664          CU header.  FIXME: We do not have a good way to determine the 
1665          latter.  Always use the target pointer size for now.  */
1666       cie->addr_size = gdbarch_ptr_bit (gdbarch) / TARGET_CHAR_BIT;
1667
1668       /* We'll determine the final value later, but we need to
1669          initialize it conservatively.  */
1670       cie->signal_frame = 0;
1671
1672       /* Check version number.  */
1673       cie_version = read_1_byte (unit->abfd, buf);
1674       if (cie_version != 1 && cie_version != 3)
1675         return NULL;
1676       cie->version = cie_version;
1677       buf += 1;
1678
1679       /* Interpret the interesting bits of the augmentation.  */
1680       cie->augmentation = augmentation = (char *) buf;
1681       buf += (strlen (augmentation) + 1);
1682
1683       /* Ignore armcc augmentations.  We only use them for quirks,
1684          and that doesn't happen until later.  */
1685       if (strncmp (augmentation, "armcc", 5) == 0)
1686         augmentation += strlen (augmentation);
1687
1688       /* The GCC 2.x "eh" augmentation has a pointer immediately
1689          following the augmentation string, so it must be handled
1690          first.  */
1691       if (augmentation[0] == 'e' && augmentation[1] == 'h')
1692         {
1693           /* Skip.  */
1694           buf += gdbarch_ptr_bit (gdbarch) / TARGET_CHAR_BIT;
1695           augmentation += 2;
1696         }
1697
1698       cie->code_alignment_factor =
1699         read_unsigned_leb128 (unit->abfd, buf, &bytes_read);
1700       buf += bytes_read;
1701
1702       cie->data_alignment_factor =
1703         read_signed_leb128 (unit->abfd, buf, &bytes_read);
1704       buf += bytes_read;
1705
1706       if (cie_version == 1)
1707         {
1708           cie->return_address_register = read_1_byte (unit->abfd, buf);
1709           bytes_read = 1;
1710         }
1711       else
1712         cie->return_address_register = read_unsigned_leb128 (unit->abfd, buf,
1713                                                              &bytes_read);
1714       cie->return_address_register
1715         = dwarf2_frame_adjust_regnum (gdbarch,
1716                                       cie->return_address_register,
1717                                       eh_frame_p);
1718
1719       buf += bytes_read;
1720
1721       cie->saw_z_augmentation = (*augmentation == 'z');
1722       if (cie->saw_z_augmentation)
1723         {
1724           ULONGEST length;
1725
1726           length = read_unsigned_leb128 (unit->abfd, buf, &bytes_read);
1727           buf += bytes_read;
1728           if (buf > end)
1729             return NULL;
1730           cie->initial_instructions = buf + length;
1731           augmentation++;
1732         }
1733
1734       while (*augmentation)
1735         {
1736           /* "L" indicates a byte showing how the LSDA pointer is encoded.  */
1737           if (*augmentation == 'L')
1738             {
1739               /* Skip.  */
1740               buf++;
1741               augmentation++;
1742             }
1743
1744           /* "R" indicates a byte indicating how FDE addresses are encoded.  */
1745           else if (*augmentation == 'R')
1746             {
1747               cie->encoding = *buf++;
1748               augmentation++;
1749             }
1750
1751           /* "P" indicates a personality routine in the CIE augmentation.  */
1752           else if (*augmentation == 'P')
1753             {
1754               /* Skip.  Avoid indirection since we throw away the result.  */
1755               gdb_byte encoding = (*buf++) & ~DW_EH_PE_indirect;
1756               read_encoded_value (unit, encoding, cie->addr_size,
1757                                   buf, &bytes_read, 0);
1758               buf += bytes_read;
1759               augmentation++;
1760             }
1761
1762           /* "S" indicates a signal frame, such that the return
1763              address must not be decremented to locate the call frame
1764              info for the previous frame; it might even be the first
1765              instruction of a function, so decrementing it would take
1766              us to a different function.  */
1767           else if (*augmentation == 'S')
1768             {
1769               cie->signal_frame = 1;
1770               augmentation++;
1771             }
1772
1773           /* Otherwise we have an unknown augmentation.  Assume that either
1774              there is no augmentation data, or we saw a 'z' prefix.  */
1775           else
1776             {
1777               if (cie->initial_instructions)
1778                 buf = cie->initial_instructions;
1779               break;
1780             }
1781         }
1782
1783       cie->initial_instructions = buf;
1784       cie->end = end;
1785       cie->unit = unit;
1786
1787       add_cie (cie_table, cie);
1788     }
1789   else
1790     {
1791       /* This is a FDE.  */
1792       struct dwarf2_fde *fde;
1793
1794       /* In an .eh_frame section, the CIE pointer is the delta between the
1795          address within the FDE where the CIE pointer is stored and the
1796          address of the CIE.  Convert it to an offset into the .eh_frame
1797          section.  */
1798       if (eh_frame_p)
1799         {
1800           cie_pointer = buf - unit->dwarf_frame_buffer - cie_pointer;
1801           cie_pointer -= (dwarf64_p ? 8 : 4);
1802         }
1803
1804       /* In either case, validate the result is still within the section.  */
1805       if (cie_pointer >= unit->dwarf_frame_size)
1806         return NULL;
1807
1808       fde = (struct dwarf2_fde *)
1809         obstack_alloc (&unit->objfile->objfile_obstack,
1810                        sizeof (struct dwarf2_fde));
1811       fde->cie = find_cie (cie_table, cie_pointer);
1812       if (fde->cie == NULL)
1813         {
1814           decode_frame_entry (unit, unit->dwarf_frame_buffer + cie_pointer,
1815                               eh_frame_p, cie_table, fde_table);
1816           fde->cie = find_cie (cie_table, cie_pointer);
1817         }
1818
1819       gdb_assert (fde->cie != NULL);
1820
1821       fde->initial_location =
1822         read_encoded_value (unit, fde->cie->encoding, fde->cie->addr_size,
1823                             buf, &bytes_read, 0);
1824       buf += bytes_read;
1825
1826       fde->address_range =
1827         read_encoded_value (unit, fde->cie->encoding & 0x0f,
1828                             fde->cie->addr_size, buf, &bytes_read, 0);
1829       buf += bytes_read;
1830
1831       /* A 'z' augmentation in the CIE implies the presence of an
1832          augmentation field in the FDE as well.  The only thing known
1833          to be in here at present is the LSDA entry for EH.  So we
1834          can skip the whole thing.  */
1835       if (fde->cie->saw_z_augmentation)
1836         {
1837           ULONGEST length;
1838
1839           length = read_unsigned_leb128 (unit->abfd, buf, &bytes_read);
1840           buf += bytes_read + length;
1841           if (buf > end)
1842             return NULL;
1843         }
1844
1845       fde->instructions = buf;
1846       fde->end = end;
1847
1848       fde->eh_frame_p = eh_frame_p;
1849
1850       add_fde (fde_table, fde);
1851     }
1852
1853   return end;
1854 }
1855
1856 /* Read a CIE or FDE in BUF and decode it.  */
1857 static gdb_byte *
1858 decode_frame_entry (struct comp_unit *unit, gdb_byte *start, int eh_frame_p,
1859                     struct dwarf2_cie_table *cie_table,
1860                     struct dwarf2_fde_table *fde_table)
1861 {
1862   enum { NONE, ALIGN4, ALIGN8, FAIL } workaround = NONE;
1863   gdb_byte *ret;
1864   const char *msg;
1865   ptrdiff_t start_offset;
1866
1867   while (1)
1868     {
1869       ret = decode_frame_entry_1 (unit, start, eh_frame_p,
1870                                   cie_table, fde_table);
1871       if (ret != NULL)
1872         break;
1873
1874       /* We have corrupt input data of some form.  */
1875
1876       /* ??? Try, weakly, to work around compiler/assembler/linker bugs
1877          and mismatches wrt padding and alignment of debug sections.  */
1878       /* Note that there is no requirement in the standard for any
1879          alignment at all in the frame unwind sections.  Testing for
1880          alignment before trying to interpret data would be incorrect.
1881
1882          However, GCC traditionally arranged for frame sections to be
1883          sized such that the FDE length and CIE fields happen to be
1884          aligned (in theory, for performance).  This, unfortunately,
1885          was done with .align directives, which had the side effect of
1886          forcing the section to be aligned by the linker.
1887
1888          This becomes a problem when you have some other producer that
1889          creates frame sections that are not as strictly aligned.  That
1890          produces a hole in the frame info that gets filled by the 
1891          linker with zeros.
1892
1893          The GCC behaviour is arguably a bug, but it's effectively now
1894          part of the ABI, so we're now stuck with it, at least at the
1895          object file level.  A smart linker may decide, in the process
1896          of compressing duplicate CIE information, that it can rewrite
1897          the entire output section without this extra padding.  */
1898
1899       start_offset = start - unit->dwarf_frame_buffer;
1900       if (workaround < ALIGN4 && (start_offset & 3) != 0)
1901         {
1902           start += 4 - (start_offset & 3);
1903           workaround = ALIGN4;
1904           continue;
1905         }
1906       if (workaround < ALIGN8 && (start_offset & 7) != 0)
1907         {
1908           start += 8 - (start_offset & 7);
1909           workaround = ALIGN8;
1910           continue;
1911         }
1912
1913       /* Nothing left to try.  Arrange to return as if we've consumed
1914          the entire input section.  Hopefully we'll get valid info from
1915          the other of .debug_frame/.eh_frame.  */
1916       workaround = FAIL;
1917       ret = unit->dwarf_frame_buffer + unit->dwarf_frame_size;
1918       break;
1919     }
1920
1921   switch (workaround)
1922     {
1923     case NONE:
1924       break;
1925
1926     case ALIGN4:
1927       complaint (&symfile_complaints,
1928                  _("Corrupt data in %s:%s; align 4 workaround apparently succeeded"),
1929                  unit->dwarf_frame_section->owner->filename,
1930                  unit->dwarf_frame_section->name);
1931       break;
1932
1933     case ALIGN8:
1934       complaint (&symfile_complaints,
1935                  _("Corrupt data in %s:%s; align 8 workaround apparently succeeded"),
1936                  unit->dwarf_frame_section->owner->filename,
1937                  unit->dwarf_frame_section->name);
1938       break;
1939
1940     default:
1941       complaint (&symfile_complaints,
1942                  _("Corrupt data in %s:%s"),
1943                  unit->dwarf_frame_section->owner->filename,
1944                  unit->dwarf_frame_section->name);
1945       break;
1946     }
1947
1948   return ret;
1949 }
1950 \f
1951
1952 /* Imported from dwarf2read.c.  */
1953 extern void dwarf2_get_section_info (struct objfile *, const char *, asection **,
1954                                      gdb_byte **, bfd_size_type *);
1955
1956 static int
1957 qsort_fde_cmp (const void *a, const void *b)
1958 {
1959   struct dwarf2_fde *aa = *(struct dwarf2_fde **)a;
1960   struct dwarf2_fde *bb = *(struct dwarf2_fde **)b;
1961   if (aa->initial_location == bb->initial_location)
1962     /* Put eh_frame entries after debug_frame ones.  */
1963     return aa->eh_frame_p - bb->eh_frame_p;
1964
1965   return (aa->initial_location < bb->initial_location) ? -1 : 1;
1966 }
1967
1968 void
1969 dwarf2_build_frame_info (struct objfile *objfile)
1970 {
1971   struct comp_unit *unit;
1972   gdb_byte *frame_ptr;
1973   struct dwarf2_cie_table cie_table;
1974   struct dwarf2_fde_table fde_table;
1975
1976   cie_table.num_entries = 0;
1977   cie_table.entries = NULL;
1978
1979   fde_table.num_entries = 0;
1980   fde_table.entries = NULL;
1981
1982   /* Build a minimal decoding of the DWARF2 compilation unit.  */
1983   unit = (struct comp_unit *) obstack_alloc (&objfile->objfile_obstack,
1984                                              sizeof (struct comp_unit));
1985   unit->abfd = objfile->obfd;
1986   unit->objfile = objfile;
1987   unit->dbase = 0;
1988   unit->tbase = 0;
1989
1990   dwarf2_get_section_info (objfile, ".eh_frame",
1991                            &unit->dwarf_frame_section,
1992                            &unit->dwarf_frame_buffer,
1993                            &unit->dwarf_frame_size);
1994   if (unit->dwarf_frame_size)
1995     {
1996       asection *got, *txt;
1997
1998       /* FIXME: kettenis/20030602: This is the DW_EH_PE_datarel base
1999          that is used for the i386/amd64 target, which currently is
2000          the only target in GCC that supports/uses the
2001          DW_EH_PE_datarel encoding.  */
2002       got = bfd_get_section_by_name (unit->abfd, ".got");
2003       if (got)
2004         unit->dbase = got->vma;
2005
2006       /* GCC emits the DW_EH_PE_textrel encoding type on sh and ia64
2007          so far.  */
2008       txt = bfd_get_section_by_name (unit->abfd, ".text");
2009       if (txt)
2010         unit->tbase = txt->vma;
2011
2012       frame_ptr = unit->dwarf_frame_buffer;
2013       while (frame_ptr < unit->dwarf_frame_buffer + unit->dwarf_frame_size)
2014         frame_ptr = decode_frame_entry (unit, frame_ptr, 1,
2015                                         &cie_table, &fde_table);
2016
2017       if (cie_table.num_entries != 0)
2018         {
2019           /* Reinit cie_table: debug_frame has different CIEs.  */
2020           xfree (cie_table.entries);
2021           cie_table.num_entries = 0;
2022           cie_table.entries = NULL;
2023         }
2024     }
2025
2026   dwarf2_get_section_info (objfile, ".debug_frame",
2027                            &unit->dwarf_frame_section,
2028                            &unit->dwarf_frame_buffer,
2029                            &unit->dwarf_frame_size);
2030   if (unit->dwarf_frame_size)
2031     {
2032       frame_ptr = unit->dwarf_frame_buffer;
2033       while (frame_ptr < unit->dwarf_frame_buffer + unit->dwarf_frame_size)
2034         frame_ptr = decode_frame_entry (unit, frame_ptr, 0,
2035                                         &cie_table, &fde_table);
2036     }
2037
2038   /* Discard the cie_table, it is no longer needed.  */
2039   if (cie_table.num_entries != 0)
2040     {
2041       xfree (cie_table.entries);
2042       cie_table.entries = NULL;   /* Paranoia.  */
2043       cie_table.num_entries = 0;  /* Paranoia.  */
2044     }
2045
2046   if (fde_table.num_entries != 0)
2047     {
2048       struct dwarf2_fde_table *fde_table2;
2049       int i, j;
2050
2051       /* Prepare FDE table for lookups.  */
2052       qsort (fde_table.entries, fde_table.num_entries,
2053              sizeof (fde_table.entries[0]), qsort_fde_cmp);
2054
2055       /* Copy fde_table to obstack: it is needed at runtime.  */
2056       fde_table2 = (struct dwarf2_fde_table *)
2057           obstack_alloc (&objfile->objfile_obstack, sizeof (*fde_table2));
2058
2059       /* Since we'll be doing bsearch, squeeze out identical (except for
2060          eh_frame_p) fde entries so bsearch result is predictable.  */
2061       for (i = 0, j = 0; j < fde_table.num_entries; ++i)
2062         {
2063           const int k = j;
2064
2065           obstack_grow (&objfile->objfile_obstack, &fde_table.entries[j],
2066                         sizeof (fde_table.entries[0]));
2067           while (++j < fde_table.num_entries
2068                  && (fde_table.entries[k]->initial_location ==
2069                      fde_table.entries[j]->initial_location))
2070             /* Skip.  */;
2071         }
2072       fde_table2->entries = obstack_finish (&objfile->objfile_obstack);
2073       fde_table2->num_entries = i;
2074       set_objfile_data (objfile, dwarf2_frame_objfile_data, fde_table2);
2075
2076       /* Discard the original fde_table.  */
2077       xfree (fde_table.entries);
2078     }
2079 }
2080
2081 /* Provide a prototype to silence -Wmissing-prototypes.  */
2082 void _initialize_dwarf2_frame (void);
2083
2084 void
2085 _initialize_dwarf2_frame (void)
2086 {
2087   dwarf2_frame_data = gdbarch_data_register_pre_init (dwarf2_frame_init);
2088   dwarf2_frame_objfile_data = register_objfile_data ();
2089 }