1 /* Data structures associated with breakpoints in GDB.
2 Copyright (C) 1992-2013 Free Software Foundation, Inc.
4 This file is part of GDB.
6 This program is free software; you can redistribute it and/or modify
7 it under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 3 of the License, or
9 (at your option) any later version.
11 This program is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 GNU General Public License for more details.
16 You should have received a copy of the GNU General Public License
17 along with this program. If not, see <http://www.gnu.org/licenses/>. */
19 #if !defined (BREAKPOINT_H)
20 #define BREAKPOINT_H 1
30 struct breakpoint_object;
31 struct get_number_or_range_state;
35 struct linespec_result;
38 /* This is the maximum number of bytes a breakpoint instruction can
39 take. Feel free to increase it. It's just used in a few places to
40 size arrays that should be independent of the target
43 #define BREAKPOINT_MAX 16
46 /* Type of breakpoint. */
47 /* FIXME In the future, we should fold all other breakpoint-like
48 things into here. This includes:
50 * single-step (for machines where we have to simulate single
51 stepping) (probably, though perhaps it is better for it to look as
52 much as possible like a single-step to wait_for_inferior). */
56 bp_none = 0, /* Eventpoint has been deleted */
57 bp_breakpoint, /* Normal breakpoint */
58 bp_hardware_breakpoint, /* Hardware assisted breakpoint */
59 bp_until, /* used by until command */
60 bp_finish, /* used by finish command */
61 bp_watchpoint, /* Watchpoint */
62 bp_hardware_watchpoint, /* Hardware assisted watchpoint */
63 bp_read_watchpoint, /* read watchpoint, (hardware assisted) */
64 bp_access_watchpoint, /* access watchpoint, (hardware assisted) */
65 bp_longjmp, /* secret breakpoint to find longjmp() */
66 bp_longjmp_resume, /* secret breakpoint to escape longjmp() */
68 /* Breakpoint placed to the same location(s) like bp_longjmp but used to
69 protect against stale DUMMY_FRAME. Multiple bp_longjmp_call_dummy and
70 one bp_call_dummy are chained together by related_breakpoint for each
72 bp_longjmp_call_dummy,
74 /* An internal breakpoint that is installed on the unwinder's
77 /* An internal breakpoint that is set at the point where an
78 exception will land. */
81 /* Used by wait_for_inferior for stepping over subroutine calls,
82 and for skipping prologues. */
85 /* Used by wait_for_inferior for stepping over signal
89 /* Used to detect when a watchpoint expression has gone out of
90 scope. These breakpoints are usually not visible to the user.
92 This breakpoint has some interesting properties:
94 1) There's always a 1:1 mapping between watchpoints
95 on local variables and watchpoint_scope breakpoints.
97 2) It automatically deletes itself and the watchpoint it's
98 associated with when hit.
100 3) It can never be disabled. */
103 /* The breakpoint at the end of a call dummy. See bp_longjmp_call_dummy it
104 is chained with by related_breakpoint. */
107 /* A breakpoint set on std::terminate, that is used to catch
108 otherwise uncaught exceptions thrown during an inferior call. */
111 /* Some dynamic linkers (HP, maybe Solaris) can arrange for special
112 code in the inferior to run when significant events occur in the
113 dynamic linker (for example a library is loaded or unloaded).
115 By placing a breakpoint in this magic code GDB will get control
116 when these significant events occur. GDB can then re-examine
117 the dynamic linker's data structures to discover any newly loaded
118 dynamic libraries. */
121 /* Some multi-threaded systems can arrange for a location in the
122 inferior to be executed when certain thread-related events occur
123 (such as thread creation or thread death).
125 By placing a breakpoint at one of these locations, GDB will get
126 control when these events occur. GDB can then update its thread
131 /* On the same principal, an overlay manager can arrange to call a
132 magic location in the inferior whenever there is an interesting
133 change in overlay status. GDB can update its overlay tables
134 and fiddle with breakpoints in overlays when this breakpoint
139 /* Master copies of longjmp breakpoints. These are always installed
140 as soon as an objfile containing longjmp is loaded, but they are
141 always disabled. While necessary, temporary clones of bp_longjmp
142 type will be created and enabled. */
146 /* Master copies of std::terminate breakpoints. */
147 bp_std_terminate_master,
149 /* Like bp_longjmp_master, but for exceptions. */
156 bp_static_tracepoint,
158 /* A dynamic printf stops at the given location, does a formatted
159 print, then automatically continues. (Although this is sort of
160 like a macro packaging up standard breakpoint functionality,
161 GDB doesn't have a way to construct types of breakpoint from
162 elements of behavior.) */
165 /* Event for JIT compiled code generation or deletion. */
168 /* Breakpoint is placed at the STT_GNU_IFUNC resolver. When hit GDB
169 inserts new bp_gnu_ifunc_resolver_return at the caller.
170 bp_gnu_ifunc_resolver is still being kept here as a different thread
171 may still hit it before bp_gnu_ifunc_resolver_return is hit by the
173 bp_gnu_ifunc_resolver,
175 /* On its hit GDB now know the resolved address of the target
176 STT_GNU_IFUNC function. Associated bp_gnu_ifunc_resolver can be
177 deleted now and the breakpoint moved to the target function entry
179 bp_gnu_ifunc_resolver_return,
182 /* States of enablement of breakpoint. */
186 bp_disabled, /* The eventpoint is inactive, and cannot
188 bp_enabled, /* The eventpoint is active, and can
190 bp_call_disabled, /* The eventpoint has been disabled while a
191 call into the inferior is "in flight",
192 because some eventpoints interfere with
193 the implementation of a call on some
194 targets. The eventpoint will be
195 automatically enabled and reset when the
196 call "lands" (either completes, or stops
197 at another eventpoint). */
198 bp_permanent /* There is a breakpoint instruction
199 hard-wired into the target's code. Don't
200 try to write another breakpoint
201 instruction on top of it, or restore its
202 value. Step over it using the
203 architecture's SKIP_INSN macro. */
207 /* Disposition of breakpoint. Ie: what to do after hitting it. */
211 disp_del, /* Delete it */
212 disp_del_at_next_stop, /* Delete at next stop,
213 whether hit or not */
214 disp_disable, /* Disable it */
215 disp_donttouch /* Leave it alone */
218 enum target_hw_bp_type
220 hw_write = 0, /* Common HW watchpoint */
221 hw_read = 1, /* Read HW watchpoint */
222 hw_access = 2, /* Access HW watchpoint */
223 hw_execute = 3 /* Execute HW breakpoint */
227 /* Status of breakpoint conditions used when synchronizing
228 conditions with the target. */
230 enum condition_status
232 condition_unchanged = 0,
237 /* Information used by targets to insert and remove breakpoints. */
239 struct bp_target_info
241 /* Address space at which the breakpoint was placed. */
242 struct address_space *placed_address_space;
244 /* Address at which the breakpoint was placed. This is normally the
245 same as ADDRESS from the bp_location, except when adjustment
246 happens in gdbarch_breakpoint_from_pc. The most common form of
247 adjustment is stripping an alternate ISA marker from the PC which
248 is used to determine the type of breakpoint to insert. */
249 CORE_ADDR placed_address;
251 /* If this is a ranged breakpoint, then this field contains the
252 length of the range that will be watched for execution. */
255 /* If the breakpoint lives in memory and reading that memory would
256 give back the breakpoint, instead of the original contents, then
257 the original contents are cached here. Only SHADOW_LEN bytes of
258 this buffer are valid, and only when the breakpoint is inserted. */
259 gdb_byte shadow_contents[BREAKPOINT_MAX];
261 /* The length of the data cached in SHADOW_CONTENTS. */
264 /* The size of the placed breakpoint, according to
265 gdbarch_breakpoint_from_pc, when the breakpoint was inserted.
266 This is generally the same as SHADOW_LEN, unless we did not need
267 to read from the target to implement the memory breakpoint
268 (e.g. if a remote stub handled the details). We may still need
269 the size to remove the breakpoint safely. */
272 /* Vector of conditions the target should evaluate if it supports target-side
273 breakpoint conditions. */
274 VEC(agent_expr_p) *conditions;
276 /* Vector of commands the target should evaluate if it supports
277 target-side breakpoint commands. */
278 VEC(agent_expr_p) *tcommands;
280 /* Flag that is true if the breakpoint should be left in place even
281 when GDB is not connected. */
285 /* GDB maintains two types of information about each breakpoint (or
286 watchpoint, or other related event). The first type corresponds
287 to struct breakpoint; this is a relatively high-level structure
288 which contains the source location(s), stopping conditions, user
289 commands to execute when the breakpoint is hit, and so forth.
291 The second type of information corresponds to struct bp_location.
292 Each breakpoint has one or (eventually) more locations associated
293 with it, which represent target-specific and machine-specific
294 mechanisms for stopping the program. For instance, a watchpoint
295 expression may require multiple hardware watchpoints in order to
296 catch all changes in the value of the expression being watched. */
300 bp_loc_software_breakpoint,
301 bp_loc_hardware_breakpoint,
302 bp_loc_hardware_watchpoint,
303 bp_loc_other /* Miscellaneous... */
306 /* This structure is a collection of function pointers that, if
307 available, will be called instead of performing the default action
308 for this bp_loc_type. */
310 struct bp_location_ops
312 /* Destructor. Releases everything from SELF (but not SELF
314 void (*dtor) (struct bp_location *self);
319 /* Chain pointer to the next breakpoint location for
320 the same parent breakpoint. */
321 struct bp_location *next;
323 /* Methods associated with this location. */
324 const struct bp_location_ops *ops;
326 /* The reference count. */
329 /* Type of this breakpoint location. */
330 enum bp_loc_type loc_type;
332 /* Each breakpoint location must belong to exactly one higher-level
333 breakpoint. This pointer is NULL iff this bp_location is no
334 longer attached to a breakpoint. For example, when a breakpoint
335 is deleted, its locations may still be found in the
336 moribund_locations list, or if we had stopped for it, in
338 struct breakpoint *owner;
340 /* Conditional. Break only if this expression's value is nonzero.
341 Unlike string form of condition, which is associated with
342 breakpoint, this is associated with location, since if breakpoint
343 has several locations, the evaluation of expression can be
344 different for different locations. Only valid for real
345 breakpoints; a watchpoint's conditional expression is stored in
346 the owner breakpoint object. */
347 struct expression *cond;
349 /* Conditional expression in agent expression
350 bytecode form. This is used for stub-side breakpoint
351 condition evaluation. */
352 struct agent_expr *cond_bytecode;
354 /* Signals that the condition has changed since the last time
355 we updated the global location list. This means the condition
356 needs to be sent to the target again. This is used together
357 with target-side breakpoint conditions.
359 condition_unchanged: It means there has been no condition changes.
361 condition_modified: It means this location had its condition modified.
363 condition_updated: It means we already marked all the locations that are
364 duplicates of this location and thus we don't need to call
365 force_breakpoint_reinsertion (...) for this location. */
367 enum condition_status condition_changed;
369 struct agent_expr *cmd_bytecode;
371 /* Signals that breakpoint conditions and/or commands need to be
372 re-synched with the target. This has no use other than
373 target-side breakpoints. */
376 /* This location's address is in an unloaded solib, and so this
377 location should not be inserted. It will be automatically
378 enabled when that solib is loaded. */
381 /* Is this particular location enabled. */
384 /* Nonzero if this breakpoint is now inserted. */
387 /* Nonzero if this is not the first breakpoint in the list
388 for the given address. location of tracepoint can _never_
389 be duplicated with other locations of tracepoints and other
390 kinds of breakpoints, because two locations at the same
391 address may have different actions, so both of these locations
392 should be downloaded and so that `tfind N' always works. */
395 /* If we someday support real thread-specific breakpoints, then
396 the breakpoint location will need a thread identifier. */
398 /* Data for specific breakpoint types. These could be a union, but
399 simplicity is more important than memory usage for breakpoints. */
401 /* Architecture associated with this location's address. May be
402 different from the breakpoint architecture. */
403 struct gdbarch *gdbarch;
405 /* The program space associated with this breakpoint location
406 address. Note that an address space may be represented in more
407 than one program space (e.g. each uClinux program will be given
408 its own program space, but there will only be one address space
409 for all of them), but we must not insert more than one location
410 at the same address in the same address space. */
411 struct program_space *pspace;
413 /* Note that zero is a perfectly valid code address on some platforms
414 (for example, the mn10200 (OBSOLETE) and mn10300 simulators). NULL
415 is not a special value for this field. Valid for all types except
419 /* For hardware watchpoints, the size of the memory region being
420 watched. For hardware ranged breakpoints, the size of the
424 /* Type of hardware watchpoint. */
425 enum target_hw_bp_type watchpoint_type;
427 /* For any breakpoint type with an address, this is the section
428 associated with the address. Used primarily for overlay
430 struct obj_section *section;
432 /* Address at which breakpoint was requested, either by the user or
433 by GDB for internal breakpoints. This will usually be the same
434 as ``address'' (above) except for cases in which
435 ADJUST_BREAKPOINT_ADDRESS has computed a different address at
436 which to place the breakpoint in order to comply with a
437 processor's architectual constraints. */
438 CORE_ADDR requested_address;
440 /* An additional address assigned with this location. This is currently
441 only used by STT_GNU_IFUNC resolver breakpoints to hold the address
442 of the resolver function. */
443 CORE_ADDR related_address;
445 /* If the location comes from a probe point, this is the probe associated
451 /* Details of the placed breakpoint, when inserted. */
452 struct bp_target_info target_info;
454 /* Similarly, for the breakpoint at an overlay's LMA, if necessary. */
455 struct bp_target_info overlay_target_info;
457 /* In a non-stop mode, it's possible that we delete a breakpoint,
458 but as we do that, some still running thread hits that breakpoint.
459 For that reason, we need to keep locations belonging to deleted
460 breakpoints for a bit, so that don't report unexpected SIGTRAP.
461 We can't keep such locations forever, so we use a heuristic --
462 after we process certain number of inferior events since
463 breakpoint was deleted, we retire all locations of that breakpoint.
464 This variable keeps a number of events still to go, when
465 it becomes 0 this location is retired. */
466 int events_till_retirement;
468 /* Line number which was used to place this location.
470 Breakpoint placed into a comment keeps it's user specified line number
471 despite ADDRESS resolves into a different line number. */
475 /* Symtab which was used to place this location. This is used
476 to find the corresponding source file name. */
478 struct symtab *symtab;
481 /* Return values for bpstat_explains_signal. Note that the order of
482 the constants is important here; they are compared directly in
483 bpstat_explains_signal. */
485 enum bpstat_signal_value
487 /* bpstat does not explain this signal. */
488 BPSTAT_SIGNAL_NO = 0,
490 /* bpstat explains this signal; signal should not be delivered. */
493 /* bpstat explains this signal; signal should be delivered. */
497 /* This structure is a collection of function pointers that, if available,
498 will be called instead of the performing the default action for this
501 struct breakpoint_ops
503 /* Destructor. Releases everything from SELF (but not SELF
505 void (*dtor) (struct breakpoint *self);
507 /* Allocate a location for this breakpoint. */
508 struct bp_location * (*allocate_location) (struct breakpoint *);
510 /* Reevaluate a breakpoint. This is necessary after symbols change
511 (e.g., an executable or DSO was loaded, or the inferior just
513 void (*re_set) (struct breakpoint *self);
515 /* Insert the breakpoint or watchpoint or activate the catchpoint.
516 Return 0 for success, 1 if the breakpoint, watchpoint or
517 catchpoint type is not supported, -1 for failure. */
518 int (*insert_location) (struct bp_location *);
520 /* Remove the breakpoint/catchpoint that was previously inserted
521 with the "insert" method above. Return 0 for success, 1 if the
522 breakpoint, watchpoint or catchpoint type is not supported,
524 int (*remove_location) (struct bp_location *);
526 /* Return true if it the target has stopped due to hitting
527 breakpoint location BL. This function does not check if we
528 should stop, only if BL explains the stop. ASPACE is the address
529 space in which the event occurred, BP_ADDR is the address at
530 which the inferior stopped, and WS is the target_waitstatus
531 describing the event. */
532 int (*breakpoint_hit) (const struct bp_location *bl,
533 struct address_space *aspace,
535 const struct target_waitstatus *ws);
537 /* Check internal conditions of the breakpoint referred to by BS.
538 If we should not stop for this breakpoint, set BS->stop to 0. */
539 void (*check_status) (struct bpstats *bs);
541 /* Tell how many hardware resources (debug registers) are needed
542 for this breakpoint. If this function is not provided, then
543 the breakpoint or watchpoint needs one debug register. */
544 int (*resources_needed) (const struct bp_location *);
546 /* Tell whether we can downgrade from a hardware watchpoint to a software
547 one. If not, the user will not be able to enable the watchpoint when
548 there are not enough hardware resources available. */
549 int (*works_in_software_mode) (const struct breakpoint *);
551 /* The normal print routine for this breakpoint, called when we
553 enum print_stop_action (*print_it) (struct bpstats *bs);
555 /* Display information about this breakpoint, for "info
557 void (*print_one) (struct breakpoint *, struct bp_location **);
559 /* Display extra information about this breakpoint, below the normal
560 breakpoint description in "info breakpoints".
562 In the example below, the "address range" line was printed
563 by print_one_detail_ranged_breakpoint.
565 (gdb) info breakpoints
566 Num Type Disp Enb Address What
567 2 hw breakpoint keep y in main at test-watch.c:70
568 address range: [0x10000458, 0x100004c7]
571 void (*print_one_detail) (const struct breakpoint *, struct ui_out *);
573 /* Display information about this breakpoint after setting it
574 (roughly speaking; this is called from "mention"). */
575 void (*print_mention) (struct breakpoint *);
577 /* Print to FP the CLI command that recreates this breakpoint. */
578 void (*print_recreate) (struct breakpoint *, struct ui_file *fp);
580 /* Create SALs from address string, storing the result in linespec_result.
582 For an explanation about the arguments, see the function
583 `create_sals_from_address_default'.
585 This function is called inside `create_breakpoint'. */
586 void (*create_sals_from_address) (char **, struct linespec_result *,
587 enum bptype, char *, char **);
589 /* This method will be responsible for creating a breakpoint given its SALs.
590 Usually, it just calls `create_breakpoints_sal' (for ordinary
591 breakpoints). However, there may be some special cases where we might
592 need to do some tweaks, e.g., see
593 `strace_marker_create_breakpoints_sal'.
595 This function is called inside `create_breakpoint'. */
596 void (*create_breakpoints_sal) (struct gdbarch *,
597 struct linespec_result *,
599 enum bptype, enum bpdisp, int, int,
600 int, const struct breakpoint_ops *,
601 int, int, int, unsigned);
603 /* Given the address string (second parameter), this method decodes it
604 and provides the SAL locations related to it. For ordinary breakpoints,
605 it calls `decode_line_full'.
607 This function is called inside `addr_string_to_sals'. */
608 void (*decode_linespec) (struct breakpoint *, char **,
609 struct symtabs_and_lines *);
611 /* Return true if this breakpoint explains a signal, but the signal
612 should still be delivered to the inferior. This is used to make
613 'catch signal' interact properly with 'handle'; see
614 bpstat_explains_signal. */
615 enum bpstat_signal_value (*explains_signal) (struct breakpoint *,
618 /* Called after evaluating the breakpoint's condition,
619 and only if it evaluated true. */
620 void (*after_condition_true) (struct bpstats *bs);
623 /* Helper for breakpoint_ops->print_recreate implementations. Prints
624 the "thread" or "task" condition of B, and then a newline.
626 Necessary because most breakpoint implementations accept
627 thread/task conditions at the end of the spec line, like "break foo
628 thread 1", which needs outputting before any breakpoint-type
629 specific extra command necessary for B's recreation. */
630 extern void print_recreate_thread (struct breakpoint *b, struct ui_file *fp);
632 enum watchpoint_triggered
634 /* This watchpoint definitely did not trigger. */
635 watch_triggered_no = 0,
637 /* Some hardware watchpoint triggered, and it might have been this
638 one, but we do not know which it was. */
639 watch_triggered_unknown,
641 /* This hardware watchpoint definitely did trigger. */
645 typedef struct bp_location *bp_location_p;
646 DEF_VEC_P(bp_location_p);
648 /* A reference-counted struct command_line. This lets multiple
649 breakpoints share a single command list. This is an implementation
650 detail to the breakpoints module. */
651 struct counted_command_line;
653 /* Some targets (e.g., embedded PowerPC) need two debug registers to set
654 a watchpoint over a memory region. If this flag is true, GDB will use
655 only one register per watchpoint, thus assuming that all acesses that
656 modify a memory location happen at its starting address. */
658 extern int target_exact_watchpoints;
660 /* Note that the ->silent field is not currently used by any commands
661 (though the code is in there if it was to be, and set_raw_breakpoint
662 does set it to 0). I implemented it because I thought it would be
663 useful for a hack I had to put in; I'm going to leave it in because
664 I can see how there might be times when it would indeed be useful */
666 /* This is for all kinds of breakpoints. */
670 /* Methods associated with this breakpoint. */
671 const struct breakpoint_ops *ops;
673 struct breakpoint *next;
674 /* Type of breakpoint. */
676 /* Zero means disabled; remember the info but don't break here. */
677 enum enable_state enable_state;
678 /* What to do with this breakpoint after we hit it. */
679 enum bpdisp disposition;
680 /* Number assigned to distinguish breakpoints. */
683 /* Location(s) associated with this high-level breakpoint. */
684 struct bp_location *loc;
686 /* Non-zero means a silent breakpoint (don't print frame info
688 unsigned char silent;
689 /* Non-zero means display ADDR_STRING to the user verbatim. */
690 unsigned char display_canonical;
691 /* Number of stops at this breakpoint that should
692 be continued automatically before really stopping. */
695 /* Number of stops at this breakpoint before it will be
699 /* Chain of command lines to execute when this breakpoint is
701 struct counted_command_line *commands;
702 /* Stack depth (address of frame). If nonzero, break only if fp
704 struct frame_id frame_id;
706 /* The program space used to set the breakpoint. This is only set
707 for breakpoints which are specific to a program space; for
708 non-thread-specific ordinary breakpoints this is NULL. */
709 struct program_space *pspace;
711 /* String we used to set the breakpoint (malloc'd). */
714 /* The filter that should be passed to decode_line_full when
715 re-setting this breakpoint. This may be NULL, but otherwise is
716 allocated with xmalloc. */
719 /* For a ranged breakpoint, the string we used to find
720 the end of the range (malloc'd). */
721 char *addr_string_range_end;
723 /* Architecture we used to set the breakpoint. */
724 struct gdbarch *gdbarch;
725 /* Language we used to set the breakpoint. */
726 enum language language;
727 /* Input radix we used to set the breakpoint. */
729 /* String form of the breakpoint condition (malloc'd), or NULL if
730 there is no condition. */
733 /* String form of extra parameters, or NULL if there are none.
737 /* Holds the address of the related watchpoint_scope breakpoint
738 when using watchpoints on local variables (might the concept of
739 a related breakpoint be useful elsewhere, if not just call it
740 the watchpoint_scope breakpoint or something like that.
742 struct breakpoint *related_breakpoint;
744 /* Thread number for thread-specific breakpoint,
745 or -1 if don't care. */
748 /* Ada task number for task-specific breakpoint,
749 or 0 if don't care. */
752 /* Count of the number of times this breakpoint was taken, dumped
753 with the info, but not used for anything else. Useful for
754 seeing how many times you hit a break prior to the program
755 aborting, so you can back up to just before the abort. */
758 /* Is breakpoint's condition not yet parsed because we found
759 no location initially so had no context to parse
761 int condition_not_parsed;
763 /* With a Python scripting enabled GDB, store a reference to the
764 Python object that has been associated with this breakpoint.
765 This is always NULL for a GDB that is not script enabled. It
766 can sometimes be NULL for enabled GDBs as not all breakpoint
767 types are tracked by the Python scripting API. */
768 struct breakpoint_object *py_bp_object;
771 /* An instance of this type is used to represent a watchpoint. It
772 includes a "struct breakpoint" as a kind of base class; users
773 downcast to "struct breakpoint *" when needed. */
777 /* The base class. */
778 struct breakpoint base;
780 /* String form of exp to use for displaying to the user (malloc'd),
783 /* String form to use for reparsing of EXP (malloc'd) or NULL. */
784 char *exp_string_reparse;
786 /* The expression we are watching, or NULL if not a watchpoint. */
787 struct expression *exp;
788 /* The largest block within which it is valid, or NULL if it is
789 valid anywhere (e.g. consists just of global symbols). */
790 const struct block *exp_valid_block;
791 /* The conditional expression if any. */
792 struct expression *cond_exp;
793 /* The largest block within which it is valid, or NULL if it is
794 valid anywhere (e.g. consists just of global symbols). */
795 const struct block *cond_exp_valid_block;
796 /* Value of the watchpoint the last time we checked it, or NULL when
797 we do not know the value yet or the value was not readable. VAL
800 /* Nonzero if VAL is valid. If VAL_VALID is set but VAL is NULL,
801 then an error occurred reading the value. */
804 /* Holds the frame address which identifies the frame this
805 watchpoint should be evaluated in, or `null' if the watchpoint
806 should be evaluated on the outermost frame. */
807 struct frame_id watchpoint_frame;
809 /* Holds the thread which identifies the frame this watchpoint
810 should be considered in scope for, or `null_ptid' if the
811 watchpoint should be evaluated in all threads. */
812 ptid_t watchpoint_thread;
814 /* For hardware watchpoints, the triggered status according to the
816 enum watchpoint_triggered watchpoint_triggered;
818 /* Whether this watchpoint is exact (see
819 target_exact_watchpoints). */
822 /* The mask address for a masked hardware watchpoint. */
823 CORE_ADDR hw_wp_mask;
826 /* Return true if BPT is either a software breakpoint or a hardware
829 extern int is_breakpoint (const struct breakpoint *bpt);
831 /* Returns true if BPT is really a watchpoint. */
833 extern int is_watchpoint (const struct breakpoint *bpt);
835 /* An instance of this type is used to represent all kinds of
836 tracepoints. It includes a "struct breakpoint" as a kind of base
837 class; users downcast to "struct breakpoint *" when needed. */
841 /* The base class. */
842 struct breakpoint base;
844 /* Number of times this tracepoint should single-step and collect
848 /* Number of times this tracepoint should be hit before
852 /* The number of the tracepoint on the target. */
853 int number_on_target;
855 /* The total space taken by all the trace frames for this
857 ULONGEST traceframe_usage;
859 /* The static tracepoint marker id, if known. */
860 char *static_trace_marker_id;
862 /* LTTng/UST allow more than one marker with the same ID string,
863 although it unadvised because it confuses tools. When setting
864 static tracepoints by marker ID, this will record the index in
865 the array of markers we found for the given marker ID for which
866 this static tracepoint corresponds. When resetting breakpoints,
867 we will use this index to try to find the same marker again. */
868 int static_trace_marker_id_idx;
871 typedef struct breakpoint *breakpoint_p;
872 DEF_VEC_P(breakpoint_p);
874 /* The following stuff is an abstract data type "bpstat" ("breakpoint
875 status"). This provides the ability to determine whether we have
876 stopped at a breakpoint, and what we should do about it. */
878 typedef struct bpstats *bpstat;
880 /* Clears a chain of bpstat, freeing storage
882 extern void bpstat_clear (bpstat *);
884 /* Return a copy of a bpstat. Like "bs1 = bs2" but all storage that
885 is part of the bpstat is copied as well. */
886 extern bpstat bpstat_copy (bpstat);
888 extern bpstat bpstat_stop_status (struct address_space *aspace,
889 CORE_ADDR pc, ptid_t ptid,
890 const struct target_waitstatus *ws);
892 /* This bpstat_what stuff tells wait_for_inferior what to do with a
893 breakpoint (a challenging task).
895 The enum values order defines priority-like order of the actions.
896 Once you've decided that some action is appropriate, you'll never
897 go back and decide something of a lower priority is better. Each
898 of these actions is mutually exclusive with the others. That
899 means, that if you find yourself adding a new action class here and
900 wanting to tell GDB that you have two simultaneous actions to
901 handle, something is wrong, and you probably don't actually need a
904 Note that a step resume breakpoint overrides another breakpoint of
905 signal handling (see comment in wait_for_inferior at where we set
906 the step_resume breakpoint). */
908 enum bpstat_what_main_action
910 /* Perform various other tests; that is, this bpstat does not
911 say to perform any action (e.g. failed watchpoint and nothing
913 BPSTAT_WHAT_KEEP_CHECKING,
915 /* Remove breakpoints, single step once, then put them back in and
916 go back to what we were doing. It's possible that this should
917 be removed from the main_action and put into a separate field,
918 to more cleanly handle
919 BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE. */
922 /* Set longjmp_resume breakpoint, remove all other breakpoints,
923 and continue. The "remove all other breakpoints" part is
924 required if we are also stepping over another breakpoint as
925 well as doing the longjmp handling. */
926 BPSTAT_WHAT_SET_LONGJMP_RESUME,
928 /* Clear longjmp_resume breakpoint, then handle as
929 BPSTAT_WHAT_KEEP_CHECKING. */
930 BPSTAT_WHAT_CLEAR_LONGJMP_RESUME,
932 /* Clear step resume breakpoint, and keep checking. */
933 BPSTAT_WHAT_STEP_RESUME,
935 /* Rather than distinguish between noisy and silent stops here, it
936 might be cleaner to have bpstat_print make that decision (also
937 taking into account stop_print_frame and source_only). But the
938 implications are a bit scary (interaction with auto-displays,
939 etc.), so I won't try it. */
942 BPSTAT_WHAT_STOP_SILENT,
944 /* Stop and print. */
945 BPSTAT_WHAT_STOP_NOISY,
947 /* Clear step resume breakpoint, and keep checking. High-priority
948 step-resume breakpoints are used when even if there's a user
949 breakpoint at the current PC when we set the step-resume
950 breakpoint, we don't want to re-handle any breakpoint other
951 than the step-resume when it's hit; instead we want to move
952 past the breakpoint. This is used in the case of skipping
954 BPSTAT_WHAT_HP_STEP_RESUME,
957 /* An enum indicating the kind of "stack dummy" stop. This is a bit
958 of a misnomer because only one kind of truly a stack dummy. */
961 /* We didn't stop at a stack dummy breakpoint. */
964 /* Stopped at a stack dummy. */
967 /* Stopped at std::terminate. */
973 enum bpstat_what_main_action main_action;
975 /* Did we hit a call dummy breakpoint? This only goes with a
976 main_action of BPSTAT_WHAT_STOP_SILENT or
977 BPSTAT_WHAT_STOP_NOISY (the concept of continuing from a call
978 dummy without popping the frame is not a useful one). */
979 enum stop_stack_kind call_dummy;
981 /* Used for BPSTAT_WHAT_SET_LONGJMP_RESUME and
982 BPSTAT_WHAT_CLEAR_LONGJMP_RESUME. True if we are handling a
983 longjmp, false if we are handling an exception. */
987 /* The possible return values for print_bpstat, print_it_normal,
988 print_it_done, print_it_noop. */
989 enum print_stop_action
991 /* We printed nothing or we need to do some more analysis. */
994 /* We printed something, and we *do* desire that something to be
995 followed by a location. */
998 /* We printed something, and we do *not* desire that something to
999 be followed by a location. */
1002 /* We already printed all we needed to print, don't print anything
1007 /* Tell what to do about this bpstat. */
1008 struct bpstat_what bpstat_what (bpstat);
1010 /* Find the bpstat associated with a breakpoint. NULL otherwise. */
1011 bpstat bpstat_find_breakpoint (bpstat, struct breakpoint *);
1013 /* Nonzero if a signal that we got in wait() was due to circumstances
1014 explained by the bpstat; and the signal should therefore not be
1016 extern enum bpstat_signal_value bpstat_explains_signal (bpstat,
1019 /* Nonzero is this bpstat causes a stop. */
1020 extern int bpstat_causes_stop (bpstat);
1022 /* Nonzero if we should step constantly (e.g. watchpoints on machines
1023 without hardware support). This isn't related to a specific bpstat,
1024 just to things like whether watchpoints are set. */
1025 extern int bpstat_should_step (void);
1027 /* Print a message indicating what happened. Returns nonzero to
1028 say that only the source line should be printed after this (zero
1029 return means print the frame as well as the source line). */
1030 extern enum print_stop_action bpstat_print (bpstat, int);
1032 /* Put in *NUM the breakpoint number of the first breakpoint we are
1033 stopped at. *BSP upon return is a bpstat which points to the
1034 remaining breakpoints stopped at (but which is not guaranteed to be
1035 good for anything but further calls to bpstat_num).
1037 Return 0 if passed a bpstat which does not indicate any breakpoints.
1038 Return -1 if stopped at a breakpoint that has been deleted since
1040 Return 1 otherwise. */
1041 extern int bpstat_num (bpstat *, int *);
1043 /* Perform actions associated with the stopped inferior. Actually, we
1044 just use this for breakpoint commands. Perhaps other actions will
1045 go here later, but this is executed at a late time (from the
1047 extern void bpstat_do_actions (void);
1049 /* Modify all entries of STOP_BPSTAT of INFERIOR_PTID so that the actions will
1050 not be performed. */
1051 extern void bpstat_clear_actions (void);
1053 /* Implementation: */
1055 /* Values used to tell the printing routine how to behave for this
1059 /* This is used when we want to do a normal printing of the reason
1060 for stopping. The output will depend on the type of eventpoint
1061 we are dealing with. This is the default value, most commonly
1064 /* This is used when nothing should be printed for this bpstat
1067 /* This is used when everything which needs to be printed has
1068 already been printed. But we still want to print the frame. */
1074 /* Linked list because there can be more than one breakpoint at
1075 the same place, and a bpstat reflects the fact that all have
1079 /* Location that caused the stop. Locations are refcounted, so
1080 this will never be NULL. Note that this location may end up
1081 detached from a breakpoint, but that does not necessary mean
1082 that the struct breakpoint is gone. E.g., consider a
1083 watchpoint with a condition that involves an inferior function
1084 call. Watchpoint locations are recreated often (on resumes,
1085 hence on infcalls too). Between creating the bpstat and after
1086 evaluating the watchpoint condition, this location may hence
1087 end up detached from its original owner watchpoint, even though
1088 the watchpoint is still listed. If it's condition evaluates as
1089 true, we still want this location to cause a stop, and we will
1090 still need to know which watchpoint it was originally attached.
1091 What this means is that we should not (in most cases) follow
1092 the `bpstat->bp_location->owner' link, but instead use the
1093 `breakpoint_at' field below. */
1094 struct bp_location *bp_location_at;
1096 /* Breakpoint that caused the stop. This is nullified if the
1097 breakpoint ends up being deleted. See comments on
1098 `bp_location_at' above for why do we need this field instead of
1099 following the location's owner. */
1100 struct breakpoint *breakpoint_at;
1102 /* The associated command list. */
1103 struct counted_command_line *commands;
1105 /* Old value associated with a watchpoint. */
1106 struct value *old_val;
1108 /* Nonzero if this breakpoint tells us to print the frame. */
1111 /* Nonzero if this breakpoint tells us to stop. */
1114 /* Tell bpstat_print and print_bp_stop_message how to print stuff
1115 associated with this element of the bpstat chain. */
1116 enum bp_print_how print_it;
1127 /* The possible return values for breakpoint_here_p.
1128 We guarantee that zero always means "no breakpoint here". */
1129 enum breakpoint_here
1131 no_breakpoint_here = 0,
1132 ordinary_breakpoint_here,
1133 permanent_breakpoint_here
1137 /* Prototypes for breakpoint-related functions. */
1139 extern enum breakpoint_here breakpoint_here_p (struct address_space *,
1142 extern int moribund_breakpoint_here_p (struct address_space *, CORE_ADDR);
1144 extern int breakpoint_inserted_here_p (struct address_space *, CORE_ADDR);
1146 extern int regular_breakpoint_inserted_here_p (struct address_space *,
1149 extern int software_breakpoint_inserted_here_p (struct address_space *,
1152 /* Returns true if there's a hardware watchpoint or access watchpoint
1153 inserted in the range defined by ADDR and LEN. */
1154 extern int hardware_watchpoint_inserted_in_range (struct address_space *,
1158 extern int breakpoint_thread_match (struct address_space *,
1161 extern void until_break_command (char *, int, int);
1163 /* Initialize a struct bp_location. */
1165 extern void init_bp_location (struct bp_location *loc,
1166 const struct bp_location_ops *ops,
1167 struct breakpoint *owner);
1169 extern void update_breakpoint_locations (struct breakpoint *b,
1170 struct symtabs_and_lines sals,
1171 struct symtabs_and_lines sals_end);
1173 extern void breakpoint_re_set (void);
1175 extern void breakpoint_re_set_thread (struct breakpoint *);
1177 extern struct breakpoint *set_momentary_breakpoint
1178 (struct gdbarch *, struct symtab_and_line, struct frame_id, enum bptype);
1180 extern struct breakpoint *set_momentary_breakpoint_at_pc
1181 (struct gdbarch *, CORE_ADDR pc, enum bptype type);
1183 extern struct breakpoint *clone_momentary_breakpoint (struct breakpoint *bpkt);
1185 extern void set_ignore_count (int, int, int);
1187 extern void breakpoint_init_inferior (enum inf_context);
1189 extern struct cleanup *make_cleanup_delete_breakpoint (struct breakpoint *);
1191 extern void delete_breakpoint (struct breakpoint *);
1193 extern void breakpoint_auto_delete (bpstat);
1195 typedef void (*walk_bp_location_callback) (struct bp_location *, void *);
1197 extern void iterate_over_bp_locations (walk_bp_location_callback);
1199 /* Return the chain of command lines to execute when this breakpoint
1201 extern struct command_line *breakpoint_commands (struct breakpoint *b);
1203 /* Return a string image of DISP. The string is static, and thus should
1204 NOT be deallocated after use. */
1205 const char *bpdisp_text (enum bpdisp disp);
1207 extern void break_command (char *, int);
1209 extern void hbreak_command_wrapper (char *, int);
1210 extern void thbreak_command_wrapper (char *, int);
1211 extern void rbreak_command_wrapper (char *, int);
1212 extern void watch_command_wrapper (char *, int, int);
1213 extern void awatch_command_wrapper (char *, int, int);
1214 extern void rwatch_command_wrapper (char *, int, int);
1215 extern void tbreak_command (char *, int);
1217 extern struct breakpoint_ops base_breakpoint_ops;
1218 extern struct breakpoint_ops bkpt_breakpoint_ops;
1219 extern struct breakpoint_ops tracepoint_breakpoint_ops;
1220 extern struct breakpoint_ops dprintf_breakpoint_ops;
1222 extern void initialize_breakpoint_ops (void);
1224 /* Arguments to pass as context to some catch command handlers. */
1225 #define CATCH_PERMANENT ((void *) (uintptr_t) 0)
1226 #define CATCH_TEMPORARY ((void *) (uintptr_t) 1)
1228 /* Like add_cmd, but add the command to both the "catch" and "tcatch"
1229 lists, and pass some additional user data to the command
1233 add_catch_command (char *name, char *docstring,
1234 void (*sfunc) (char *args, int from_tty,
1235 struct cmd_list_element *command),
1236 completer_ftype *completer,
1237 void *user_data_catch,
1238 void *user_data_tcatch);
1240 /* Initialize a breakpoint struct for Ada exception catchpoints. */
1243 init_ada_exception_breakpoint (struct breakpoint *b,
1244 struct gdbarch *gdbarch,
1245 struct symtab_and_line sal,
1247 const struct breakpoint_ops *ops,
1251 extern void init_catchpoint (struct breakpoint *b,
1252 struct gdbarch *gdbarch, int tempflag,
1254 const struct breakpoint_ops *ops);
1256 /* Add breakpoint B on the breakpoint list, and notify the user, the
1257 target and breakpoint_created observers of its existence. If
1258 INTERNAL is non-zero, the breakpoint number will be allocated from
1259 the internal breakpoint count. If UPDATE_GLL is non-zero,
1260 update_global_location_list will be called. */
1262 extern void install_breakpoint (int internal, struct breakpoint *b,
1265 /* Flags that can be passed down to create_breakpoint, etc., to affect
1266 breakpoint creation in several ways. */
1268 enum breakpoint_create_flags
1270 /* We're adding a breakpoint to our tables that is already
1271 inserted in the target. */
1272 CREATE_BREAKPOINT_FLAGS_INSERTED = 1 << 0
1275 extern int create_breakpoint (struct gdbarch *gdbarch, char *arg,
1276 char *cond_string, int thread,
1279 int tempflag, enum bptype wanted_type,
1281 enum auto_boolean pending_break_support,
1282 const struct breakpoint_ops *ops,
1285 int internal, unsigned flags);
1287 extern void insert_breakpoints (void);
1289 extern int remove_breakpoints (void);
1291 extern int remove_breakpoints_pid (int pid);
1293 /* This function can be used to physically insert eventpoints from the
1294 specified traced inferior process, without modifying the breakpoint
1295 package's state. This can be useful for those targets which
1296 support following the processes of a fork() or vfork() system call,
1297 when both of the resulting two processes are to be followed. */
1298 extern int reattach_breakpoints (int);
1300 /* This function can be used to update the breakpoint package's state
1301 after an exec() system call has been executed.
1303 This function causes the following:
1305 - All eventpoints are marked "not inserted".
1306 - All eventpoints with a symbolic address are reset such that
1307 the symbolic address must be reevaluated before the eventpoints
1309 - The solib breakpoints are explicitly removed from the breakpoint
1311 - A step-resume breakpoint, if any, is explicitly removed from the
1313 - All eventpoints without a symbolic address are removed from the
1315 extern void update_breakpoints_after_exec (void);
1317 /* This function can be used to physically remove hardware breakpoints
1318 and watchpoints from the specified traced inferior process, without
1319 modifying the breakpoint package's state. This can be useful for
1320 those targets which support following the processes of a fork() or
1321 vfork() system call, when one of the resulting two processes is to
1322 be detached and allowed to run free.
1324 It is an error to use this function on the process whose id is
1326 extern int detach_breakpoints (ptid_t ptid);
1328 /* This function is called when program space PSPACE is about to be
1329 deleted. It takes care of updating breakpoints to not reference
1330 this PSPACE anymore. */
1331 extern void breakpoint_program_space_exit (struct program_space *pspace);
1333 extern void set_longjmp_breakpoint (struct thread_info *tp,
1334 struct frame_id frame);
1335 extern void delete_longjmp_breakpoint (int thread);
1337 /* Mark all longjmp breakpoints from THREAD for later deletion. */
1338 extern void delete_longjmp_breakpoint_at_next_stop (int thread);
1340 extern struct breakpoint *set_longjmp_breakpoint_for_call_dummy (void);
1341 extern void check_longjmp_breakpoint_for_call_dummy (int thread);
1343 extern void enable_overlay_breakpoints (void);
1344 extern void disable_overlay_breakpoints (void);
1346 extern void set_std_terminate_breakpoint (void);
1347 extern void delete_std_terminate_breakpoint (void);
1349 /* These functions respectively disable or reenable all currently
1350 enabled watchpoints. When disabled, the watchpoints are marked
1351 call_disabled. When re-enabled, they are marked enabled.
1353 The intended client of these functions is call_function_by_hand.
1355 The inferior must be stopped, and all breakpoints removed, when
1356 these functions are used.
1358 The need for these functions is that on some targets (e.g., HP-UX),
1359 gdb is unable to unwind through the dummy frame that is pushed as
1360 part of the implementation of a call command. Watchpoints can
1361 cause the inferior to stop in places where this frame is visible,
1362 and that can cause execution control to become very confused.
1364 Note that if a user sets breakpoints in an interactively called
1365 function, the call_disabled watchpoints will have been re-enabled
1366 when the first such breakpoint is reached. However, on targets
1367 that are unable to unwind through the call dummy frame, watches
1368 of stack-based storage may then be deleted, because gdb will
1369 believe that their watched storage is out of scope. (Sigh.) */
1370 extern void disable_watchpoints_before_interactive_call_start (void);
1372 extern void enable_watchpoints_after_interactive_call_stop (void);
1374 /* These functions disable and re-enable all breakpoints during
1375 inferior startup. They are intended to be called from solib
1376 code where necessary. This is needed on platforms where the
1377 main executable is relocated at some point during startup
1378 processing, making breakpoint addresses invalid.
1380 If additional breakpoints are created after the routine
1381 disable_breakpoints_before_startup but before the routine
1382 enable_breakpoints_after_startup was called, they will also
1383 be marked as disabled. */
1384 extern void disable_breakpoints_before_startup (void);
1385 extern void enable_breakpoints_after_startup (void);
1387 /* For script interpreters that need to define breakpoint commands
1388 after they've already read the commands into a struct
1390 extern enum command_control_type commands_from_control_command
1391 (char *arg, struct command_line *cmd);
1393 extern void clear_breakpoint_hit_counts (void);
1395 extern struct breakpoint *get_breakpoint (int num);
1397 /* The following are for displays, which aren't really breakpoints,
1398 but here is as good a place as any for them. */
1400 extern void disable_current_display (void);
1402 extern void do_displays (void);
1404 extern void disable_display (int);
1406 extern void clear_displays (void);
1408 extern void disable_breakpoint (struct breakpoint *);
1410 extern void enable_breakpoint (struct breakpoint *);
1412 extern void breakpoint_set_commands (struct breakpoint *b,
1413 struct command_line *commands);
1415 extern void breakpoint_set_silent (struct breakpoint *b, int silent);
1417 extern void breakpoint_set_thread (struct breakpoint *b, int thread);
1419 extern void breakpoint_set_task (struct breakpoint *b, int task);
1421 /* Clear the "inserted" flag in all breakpoints. */
1422 extern void mark_breakpoints_out (void);
1424 extern void make_breakpoint_permanent (struct breakpoint *);
1426 extern struct breakpoint *create_jit_event_breakpoint (struct gdbarch *,
1429 extern struct breakpoint *create_solib_event_breakpoint (struct gdbarch *,
1432 extern struct breakpoint *create_thread_event_breakpoint (struct gdbarch *,
1435 extern void remove_jit_event_breakpoints (void);
1437 extern void remove_solib_event_breakpoints (void);
1439 extern void remove_thread_event_breakpoints (void);
1441 extern void disable_breakpoints_in_shlibs (void);
1443 /* This function returns TRUE if ep is a catchpoint. */
1444 extern int is_catchpoint (struct breakpoint *);
1446 /* Shared helper function (MI and CLI) for creating and installing
1447 a shared object event catchpoint. */
1448 extern void add_solib_catchpoint (char *arg, int is_load, int is_temp,
1451 /* Enable breakpoints and delete when hit. Called with ARG == NULL
1452 deletes all breakpoints. */
1453 extern void delete_command (char *arg, int from_tty);
1455 /* Manage a software single step breakpoint (or two). Insert may be
1456 called twice before remove is called. */
1457 extern void insert_single_step_breakpoint (struct gdbarch *,
1458 struct address_space *,
1460 extern int single_step_breakpoints_inserted (void);
1461 extern void remove_single_step_breakpoints (void);
1462 extern void cancel_single_step_breakpoints (void);
1464 /* Manage manual breakpoints, separate from the normal chain of
1465 breakpoints. These functions are used in murky target-specific
1466 ways. Please do not add more uses! */
1467 extern void *deprecated_insert_raw_breakpoint (struct gdbarch *,
1468 struct address_space *,
1470 extern int deprecated_remove_raw_breakpoint (struct gdbarch *, void *);
1472 /* Check if any hardware watchpoints have triggered, according to the
1474 int watchpoints_triggered (struct target_waitstatus *);
1476 /* Helper for transparent breakpoint hiding for memory read and write
1479 Update one of READBUF or WRITEBUF with either the shadows
1480 (READBUF), or the breakpoint instructions (WRITEBUF) of inserted
1481 breakpoints at the memory range defined by MEMADDR and extending
1482 for LEN bytes. If writing, then WRITEBUF is a copy of WRITEBUF_ORG
1484 extern void breakpoint_xfer_memory (gdb_byte *readbuf, gdb_byte *writebuf,
1485 const gdb_byte *writebuf_org,
1486 ULONGEST memaddr, LONGEST len);
1488 extern int breakpoints_always_inserted_mode (void);
1490 /* Called each time new event from target is processed.
1491 Retires previously deleted breakpoint locations that
1492 in our opinion won't ever trigger. */
1493 extern void breakpoint_retire_moribund (void);
1495 /* Set break condition of breakpoint B to EXP. */
1496 extern void set_breakpoint_condition (struct breakpoint *b, char *exp,
1499 /* Checks if we are catching syscalls or not.
1500 Returns 0 if not, greater than 0 if we are. */
1501 extern int catch_syscall_enabled (void);
1503 /* Checks if we are catching syscalls with the specific
1504 syscall_number. Used for "filtering" the catchpoints.
1505 Returns 0 if not, greater than 0 if we are. */
1506 extern int catching_syscall_number (int syscall_number);
1508 /* Return a tracepoint with the given number if found. */
1509 extern struct tracepoint *get_tracepoint (int num);
1511 extern struct tracepoint *get_tracepoint_by_number_on_target (int num);
1513 /* Find a tracepoint by parsing a number in the supplied string. */
1514 extern struct tracepoint *
1515 get_tracepoint_by_number (char **arg,
1516 struct get_number_or_range_state *state,
1519 /* Return a vector of all tracepoints currently defined. The vector
1520 is newly allocated; the caller should free when done with it. */
1521 extern VEC(breakpoint_p) *all_tracepoints (void);
1523 extern int is_tracepoint (const struct breakpoint *b);
1525 /* Return a vector of all static tracepoints defined at ADDR. The
1526 vector is newly allocated; the caller should free when done with
1528 extern VEC(breakpoint_p) *static_tracepoints_here (CORE_ADDR addr);
1530 /* Function that can be passed to read_command_line to validate
1531 that each command is suitable for tracepoint command list. */
1532 extern void check_tracepoint_command (char *line, void *closure);
1534 /* Call at the start and end of an "rbreak" command to register
1535 breakpoint numbers for a later "commands" command. */
1536 extern void start_rbreak_breakpoints (void);
1537 extern void end_rbreak_breakpoints (void);
1539 /* Breakpoint iterator function.
1541 Calls a callback function once for each breakpoint, so long as the
1542 callback function returns false. If the callback function returns
1543 true, the iteration will end and the current breakpoint will be
1544 returned. This can be useful for implementing a search for a
1545 breakpoint with arbitrary attributes, or for applying an operation
1546 to every breakpoint. */
1547 extern struct breakpoint *iterate_over_breakpoints (int (*) (struct breakpoint *,
1550 /* Nonzero if the specified PC cannot be a location where functions
1551 have been inlined. */
1553 extern int pc_at_non_inline_function (struct address_space *aspace,
1555 const struct target_waitstatus *ws);
1557 extern int user_breakpoint_p (struct breakpoint *);
1559 /* Attempt to determine architecture of location identified by SAL. */
1560 extern struct gdbarch *get_sal_arch (struct symtab_and_line sal);
1562 extern void breakpoint_free_objfile (struct objfile *objfile);
1564 extern char *ep_parse_optional_if_clause (char **arg);
1566 #endif /* !defined (BREAKPOINT_H) */
projects / platform / upstream / binutils.git / blob