1 # Copyright (C) 1989-2017 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 3 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see <http://www.gnu.org/licenses/>.
18 # Please keep lists in this file sorted alphabetically, with one item per line.
19 # Here are the general guidelines for ordering files and directories:
21 # - Files come before directories.
22 # - The extensions are not taken into account when comparing filenames, except
23 # if the filenames are otherwise equal.
24 # - A filename that is a prefix of another one comes before.
25 # - Underscores and dashes are treated equally, and come before alphanumeric
38 exec_prefix = @exec_prefix@
40 host_alias = @host_alias@
41 target_alias = @target_alias@
42 program_transform_name = @program_transform_name@
45 tooldir = $(libdir)/$(target_alias)
48 localedir = @localedir@
50 man1dir = $(mandir)/man1
51 man2dir = $(mandir)/man2
52 man3dir = $(mandir)/man3
53 man4dir = $(mandir)/man4
54 man5dir = $(mandir)/man5
55 man6dir = $(mandir)/man6
56 man7dir = $(mandir)/man7
57 man8dir = $(mandir)/man8
58 man9dir = $(mandir)/man9
60 datarootdir = @datarootdir@
64 includedir = @includedir@
66 install_sh = @install_sh@
68 # This can be referenced by `LIBINTL' as computed by
69 # ZW_GNU_GETTEXT_SISTER_DIR.
79 INSTALL_PROGRAM = @INSTALL_PROGRAM@
80 INSTALL_SCRIPT = @INSTALL_SCRIPT@
81 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
82 INSTALL_DATA = @INSTALL_DATA@
101 # If you are compiling with GCC, make sure that either 1) You have the
102 # fixed include files where GCC can reach them, or 2) You use the
103 # -traditional flag. Otherwise the ioctl calls in inflow.c
104 # will be incorrectly compiled. The "fixincludes" script in the gcc
105 # distribution will fix your include files up.
108 CXX_DIALECT = @CXX_DIALECT@
110 # Dependency tracking information.
111 DEPMODE = @CCDEPMODE@
113 depcomp = $(SHELL) $(srcdir)/../depcomp
115 # Note that these are overridden by GNU make-specific code below if
116 # GNU make is used. The overrides implement dependency tracking.
117 COMPILE.pre = $(CXX) -x c++ $(CXX_DIALECT)
118 COMPILE.post = -c -o $@
119 COMPILE = $(COMPILE.pre) $(INTERNAL_CFLAGS) $(COMPILE.post)
122 # Directory containing source files.
125 top_srcdir = @top_srcdir@
129 # This is used to rebuild ada-lex.c from ada-lex.l. If the program is
130 # not defined, but ada-lex.c is present, compilation will continue,
131 # possibly with a warning.
134 YLWRAP = $(srcdir)/../ylwrap
136 # where to find makeinfo, preferably one designed for texinfo-2
137 MAKEINFO = @MAKEINFO@
138 MAKEINFOFLAGS = @MAKEINFOFLAGS@
139 MAKEINFO_EXTRA_FLAGS = @MAKEINFO_EXTRA_FLAGS@
140 MAKEINFO_CMD = $(MAKEINFO) $(MAKEINFOFLAGS) $(MAKEINFO_EXTRA_FLAGS)
142 MAKEHTML = $(MAKEINFO_CMD) --html
145 # Set this up with gcc if you have gnu ld and the loader will print out
146 # line numbers for undefined references.
148 CC_LD = $(CXX) $(CXX_DIALECT)
150 # Where is our "include" directory? Typically $(srcdir)/../include.
151 # This is essentially the header file directory for the library
152 # routines in libiberty.
153 INCLUDE_DIR = $(srcdir)/../include
154 INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
156 # Where is the "-liberty" library? Typically in ../libiberty.
157 LIBIBERTY = ../libiberty/libiberty.a
159 # Where is the BFD library? Typically in ../bfd.
161 BFD = $(BFD_DIR)/libbfd.a
162 BFD_SRC = $(srcdir)/$(BFD_DIR)
163 BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
165 # This is where we get zlib from. zlibdir is -L../zlib and zlibinc is
166 # -I../zlib, unless we were configured with --with-system-zlib, in which
167 # case both are empty.
171 # Where is the decnumber library? Typically in ../libdecnumber.
172 LIBDECNUMBER_DIR = ../libdecnumber
173 LIBDECNUMBER = $(LIBDECNUMBER_DIR)/libdecnumber.a
174 LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)
175 LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)
177 # Where is the READLINE library? Typically in ../readline.
178 READLINE_DIR = ../readline
179 READLINE_SRC = $(srcdir)/$(READLINE_DIR)
180 READLINE = @READLINE@
181 READLINE_DEPS = @READLINE_DEPS@
182 READLINE_CFLAGS = @READLINE_CFLAGS@
184 # Where is expat? This will be empty if expat was not available.
185 LIBEXPAT = @LIBEXPAT@
187 # Where is lzma? This will be empty if lzma was not available.
190 # Where is libbabeltrace? This will be empty if lbabeltrace was not
192 LIBBABELTRACE = @LIBBABELTRACE@
194 # Where is libipt? This will be empty if libipt was not available.
197 # Where is libmpfr? This will be empty if libmpfr was not available.
200 WARN_CFLAGS = @WARN_CFLAGS@
201 WERROR_CFLAGS = @WERROR_CFLAGS@
202 GDB_WARN_CFLAGS = $(WARN_CFLAGS)
203 GDB_WERROR_CFLAGS = $(WERROR_CFLAGS)
205 GDB_WARN_CFLAGS_NO_FORMAT = `echo " $(GDB_WARN_CFLAGS) " \
206 | sed "s/ -Wformat-nonliteral / -Wno-format-nonliteral /g"`
207 GDB_WARN_CFLAGS_NO_DEFS = `echo " $(GDB_WARN_CFLAGS) " \
208 | sed "s/ -Wold-style-definition / -Wno-old-style-definition /g"`
210 RDYNAMIC = @RDYNAMIC@
212 # Where is the INTL library? Typically in ../intl.
214 INTL_DEPS = @LIBINTL_DEP@
215 INTL_CFLAGS = @INCINTL@
217 # Where is the ICONV library? This will be empty if in libc or not available.
218 LIBICONV = @LIBICONV@
220 # Did the user give us a --with-gdb-datadir option?
221 GDB_DATADIR = @GDB_DATADIR@
223 # Flags to pass to gdb when invoked with "make run".
226 # Helper code from gnulib.
227 GNULIB_BUILDDIR = build-gnulib
228 LIBGNU = $(GNULIB_BUILDDIR)/import/libgnu.a
229 INCGNU = -I$(srcdir)/gnulib/import -I$(GNULIB_BUILDDIR)/import
231 # Generated headers in the gnulib directory. These must be listed
232 # so that they are generated before other files are compiled.
233 GNULIB_H = $(GNULIB_BUILDDIR)/import/string.h @GNULIB_STDINT_H@
236 # CLI sub directory definitons
248 SUBDIR_CLI_OBS = $(patsubst %.c,%.o,$(SUBDIR_CLI_SRCS))
255 # MI sub directory definitons
276 SUBDIR_MI_OBS = $(patsubst %.c,%.o,$(SUBDIR_MI_SRCS))
283 # TUI sub directory definitions
301 tui/tui-wingeneral.c \
304 SUBDIR_TUI_OBS = $(patsubst %.c,%.o,$(SUBDIR_TUI_SRCS))
308 SUBDIR_TUI_CFLAGS = -DTUI=1
311 # GCC Compile support sub-directory definitions
313 SUBDIR_GCC_COMPILE_SRCS = \
315 compile/compile-c-support.c \
316 compile/compile-c-symbols.c \
317 compile/compile-c-types.c \
318 compile/compile-loc2c.c \
319 compile/compile-object-load.c \
320 compile/compile-object-load.h \
321 compile/compile-object-run.c \
322 compile/compile-object-run.h
324 SUBDIR_GCC_COMPILE_OBS = $(patsubst %.c,%.o,$(filter %.c,$(SUBDIR_GCC_COMPILE_SRCS)))
327 # Guile sub directory definitons for guile support.
329 SUBDIR_GUILE_SRCS = \
332 guile/scm-auto-load.c \
334 guile/scm-breakpoint.c \
337 guile/scm-exception.c \
340 guile/scm-iterator.c \
341 guile/scm-lazy-string.c \
343 guile/scm-objfile.c \
346 guile/scm-pretty-print.c \
347 guile/scm-progspace.c \
348 guile/scm-safe-call.c \
356 SUBDIR_GUILE_OBS = $(patsubst %.c,%.o,$(SUBDIR_GUILE_SRCS))
359 SUBDIR_GUILE_LDFLAGS =
360 SUBDIR_GUILE_CFLAGS =
363 # python sub directory definitons
365 SUBDIR_PYTHON_SRCS = \
367 python/py-auto-load.c \
369 python/py-bpevent.c \
370 python/py-breakpoint.c \
372 python/py-continueevent.c \
374 python/py-evtregistry.c \
376 python/py-exitedevent.c \
377 python/py-finishbreakpoint.c \
379 python/py-framefilter.c \
380 python/py-function.c \
381 python/py-gdb-readline.c \
382 python/py-inferior.c \
383 python/py-infevents.c \
384 python/py-infthread.c \
385 python/py-instruction.c \
386 python/py-lazy-string.c \
387 python/py-linetable.c \
388 python/py-newobjfileevent.c \
389 python/py-objfile.c \
391 python/py-prettyprint.c \
392 python/py-progspace.c \
394 python/py-record-btrace.c \
395 python/py-record-full.c \
396 python/py-signalevent.c \
397 python/py-stopevent.c \
400 python/py-threadevent.c \
406 python/py-xmethods.c \
409 SUBDIR_PYTHON_OBS = $(patsubst %.c,%.o,$(SUBDIR_PYTHON_SRCS))
412 SUBDIR_PYTHON_LDFLAGS =
413 SUBDIR_PYTHON_CFLAGS =
415 SUBDIR_UNITTESTS_SRCS = \
416 unittests/array-view-selftests.c \
417 unittests/common-utils-selftests.c \
418 unittests/environ-selftests.c \
419 unittests/function-view-selftests.c \
420 unittests/lookup_name_info-selftests.c \
421 unittests/memory-map-selftests.c \
422 unittests/memrange-selftests.c \
423 unittests/offset-type-selftests.c \
424 unittests/optional-selftests.c \
425 unittests/ptid-selftests.c \
426 unittests/rsp-low-selftests.c \
427 unittests/scoped_restore-selftests.c \
428 unittests/xml-utils-selftests.c
430 SUBDIR_UNITTESTS_OBS = $(patsubst %.c,%.o,$(SUBDIR_UNITTESTS_SRCS))
432 # Opcodes currently live in one of two places. Either they are in the
433 # opcode library, typically ../opcodes, or they are in a header file
435 # Where is the "-lopcodes" library, with (some of) the opcode tables and
437 OPCODES_DIR = ../opcodes
438 OPCODES_SRC = $(srcdir)/$(OPCODES_DIR)
439 OPCODES = $(OPCODES_DIR)/libopcodes.a
440 # Where are the other opcode tables which only have header file
442 OP_INCLUDE = $(INCLUDE_DIR)/opcode
443 # Some source files like to use #include "opcodes/file.h"
444 OPCODES_CFLAGS = -I$(OP_INCLUDE) -I$(OPCODES_SRC)/..
446 # The simulator is usually nonexistent; targets that include one
447 # should set this to list all the .o or .a files to be linked in.
450 WIN32LIBS = @WIN32LIBS@
452 # Tcl et al cflags and libraries
454 TCL_CFLAGS = @TCL_INCLUDE@
455 GDBTKLIBS = @GDBTKLIBS@
456 # Extra flags that the GDBTK files need:
457 GDBTK_CFLAGS = @GDBTK_CFLAGS@
460 TK_CFLAGS = @TK_INCLUDE@
462 X11_CFLAGS = @TK_XINCLUDES@
466 WIN32LDAPP = @WIN32LDAPP@
469 GUI_CFLAGS_X = @GUI_CFLAGS_X@
470 IDE_CFLAGS = $(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
472 ALL_TCL_CFLAGS = $(TCL_CFLAGS) $(TK_CFLAGS)
474 # The version of gdbtk we're building. This should be kept
475 # in sync with GDBTK_VERSION and friends in gdbtk.h.
477 GDBTK_LIBRARY = $(datadir)/insight$(GDBTK_VERSION)
479 # Gdbtk requires an absolute path to the source directory or
480 # the testsuite won't run properly.
481 GDBTK_SRC_DIR = @GDBTK_SRC_DIR@
494 SUBDIR_GDBTK_SRCS = \
495 gdbtk/generic/gdbtk.c \
496 gdbtk/generic/gdbtk-bp.c \
497 gdbtk/generic/gdbtk-cmds.c \
498 gdbtk/generic/gdbtk-hooks.c \
499 gdbtk/generic/gdbtk-interp.c \
500 gdbtk/generic/gdbtk-main.c \
501 gdbtk/generic/gdbtk-register.c \
502 gdbtk/generic/gdbtk-stack.c \
503 gdbtk/generic/gdbtk-varobj.c \
504 gdbtk/generic/gdbtk-wrapper.c
506 SUBDIR_GDBTK_DEPS = $(LIBGUI) $(TCL_DEPS) $(TK_DEPS)
507 SUBDIR_GDBTK_LDFLAGS =
508 SUBDIR_GDBTK_CFLAGS = -DGDBTK
510 CONFIG_OBS = @CONFIG_OBS@
511 CONFIG_SRCS = @CONFIG_SRCS@
512 CONFIG_DEPS = @CONFIG_DEPS@
513 CONFIG_LDFLAGS = @CONFIG_LDFLAGS@
514 ENABLE_CFLAGS = @ENABLE_CFLAGS@
515 CONFIG_ALL = @CONFIG_ALL@
516 CONFIG_CLEAN = @CONFIG_CLEAN@
517 CONFIG_INSTALL = @CONFIG_INSTALL@
518 CONFIG_UNINSTALL = @CONFIG_UNINSTALL@
519 HAVE_NATIVE_GCORE_TARGET = @HAVE_NATIVE_GCORE_TARGET@
521 CONFIG_SRC_SUBDIR = arch cli mi compile tui unittests guile python
522 CONFIG_DEP_SUBDIR = $(addsuffix /$(DEPDIR),$(CONFIG_SRC_SUBDIR))
524 # -I. for config files.
525 # -I$(srcdir) for gdb internal headers.
526 # -I$(srcdir)/config for more generic config files.
528 # It is also possible that you will need to add -I/usr/include/sys if
529 # your system doesn't have fcntl.h in /usr/include (which is where it
530 # should be according to Posix).
532 GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/common -I$(srcdir)/config \
533 -DLOCALEDIR="\"$(localedir)\"" $(DEFS)
535 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
536 GLOBAL_CFLAGS = $(MH_CFLAGS)
538 PROFILE_CFLAGS = @PROFILE_CFLAGS@
540 # These are specifically reserved for setting from the command line
541 # when running make. I.E.: "make CFLAGS=-Wmissing-prototypes".
543 CXXFLAGS = @CXXFLAGS@
545 # Set by configure, for e.g. expat. Python installations are such that
546 # C headers are included using their basename (for example, we #include
547 # <Python.h> rather than, say, <python/Python.h>). Since the file names
548 # are sometimes a little generic, we think that the risk of collision
549 # with other header files is high. If that happens, we try to mitigate
550 # a bit the consequences by putting the Python includes last in the list.
551 INTERNAL_CPPFLAGS = @CPPFLAGS@ @GUILE_CPPFLAGS@ @PYTHON_CPPFLAGS@
553 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
554 INTERNAL_CFLAGS_BASE = \
555 $(CXXFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
556 $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) $(ZLIBINC) \
557 $(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \
558 $(INTL_CFLAGS) $(INCGNU) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS)
559 INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS)
560 INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS)
562 # LDFLAGS is specifically reserved for setting from the command line
566 # Profiling options need to go here to work.
567 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
568 # and have it work; that's why CFLAGS is here.
569 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
571 $(CXXFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) \
572 $(LDFLAGS) $(CONFIG_LDFLAGS)
574 # If your system is missing alloca(), or, more likely, it's there but
575 # it doesn't work, then refer to libiberty.
577 # Libraries and corresponding dependencies for compiling gdb.
578 # XM_CLIBS, defined in *config files, have host-dependent libs.
579 # LIBIBERTY appears twice on purpose.
580 CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(ZLIB) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
581 $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) \
582 @LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \
583 $(LIBEXPAT) $(LIBLZMA) $(LIBBABELTRACE) $(LIBIPT) \
584 $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU) $(LIBICONV) $(LIBMPFR)
585 CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
586 $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
588 ADD_FILES = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
589 ADD_DEPS = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
593 LINT = /usr/5bin/lint
594 LINTFLAGS = $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
595 $(BFD_CFLAGS) $(INCLUDE_CFLAGS) \
601 # XML files to build in to GDB.
603 $(srcdir)/features/btrace.dtd \
604 $(srcdir)/features/btrace-conf.dtd \
605 $(srcdir)/features/gdb-target.dtd \
606 $(srcdir)/features/library-list.dtd \
607 $(srcdir)/features/library-list-aix.dtd \
608 $(srcdir)/features/library-list-svr4.dtd \
609 $(srcdir)/features/osdata.dtd \
610 $(srcdir)/features/threads.dtd \
611 $(srcdir)/features/traceframe-info.dtd \
612 $(srcdir)/features/xinclude.dtd
614 # Build the ser-*.o files the host supports. This includes ser-unix.o
615 # for any system that supports a POSIX interface to the serial port.
617 SER_HARDWIRE = @SER_HARDWIRE@
619 # The `remote' debugging target is supported for most architectures,
620 # but not all (e.g. 960)
633 # This is remote-sim.o if a simulator is to be linked in.
636 # Target-dependent object files.
637 TARGET_OBS = @TARGET_OBS@
639 # All target-dependent objects files that require 64-bit CORE_ADDR
640 # (used with --enable-targets=all --enable-64-bit-bfd).
641 ALL_64_TARGET_OBS = \
642 aarch64-fbsd-tdep.o \
643 aarch64-linux-tdep.o \
644 aarch64-newlib-tdep.o \
648 alpha-mdebug-tdep.o \
652 amd64-darwin-tdep.o \
660 amd64-windows-tdep.o \
662 arch/aarch64-insn.o \
668 sparc64-fbsd-tdep.o \
669 sparc64-linux-tdep.o \
670 sparc64-nbsd-tdep.o \
671 sparc64-obsd-tdep.o \
672 sparc64-sol2-tdep.o \
675 # All other target-dependent objects files (used with --enable-targets=all).
679 arch/arm-get-next-pcs.o \
735 microblaze-linux-tdep.o \
742 mn10300-linux-tdep.o \
757 ppc-ravenscar-thread.o \
763 rs6000-lynx178-tdep.o \
782 sparc-ravenscar-thread.o \
790 tilegx-linux-tdep.o \
799 xtensa-linux-tdep.o \
802 # The following native-target dependent variables are defined on
804 NAT_FILE = @NAT_FILE@
805 NATDEPFILES = @NATDEPFILES@
806 NAT_CDEPS = @NAT_CDEPS@
807 LOADLIBES = @LOADLIBES@
808 MH_CFLAGS = @MH_CFLAGS@
809 XM_CLIBS = @XM_CLIBS@
810 NAT_GENERATED_FILES = @NAT_GENERATED_FILES@
811 HAVE_NATIVE_GCORE_HOST = @HAVE_NATIVE_GCORE_HOST@
813 # Native-target dependent makefile fragment comes in here.
816 # End of native-target dependent variables.
820 "exec_prefix=$(exec_prefix)" \
821 "infodir=$(infodir)" \
822 "datarootdir=$(datarootdir)" \
824 "htmldir=$(htmldir)" \
828 "datadir=$(datadir)" \
829 "includedir=$(includedir)" \
830 "against=$(against)" \
831 "DESTDIR=$(DESTDIR)" \
833 "AR_FLAGS=$(AR_FLAGS)" \
837 "CXX_DIALECT=$(CXX_DIALECT)" \
838 "CXXFLAGS=$(CXXFLAGS)" \
839 "DLLTOOL=$(DLLTOOL)" \
840 "LDFLAGS=$(LDFLAGS)" \
842 "MAKEINFO=$(MAKEINFO)" \
843 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
844 "MAKEINFO_EXTRA_FLAGS=$(MAKEINFO_EXTRA_FLAGS)" \
845 "MAKEHTML=$(MAKEHTML)" \
846 "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
847 "INSTALL=$(INSTALL)" \
848 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
849 "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
850 "INSTALL_DATA=$(INSTALL_DATA)" \
851 "RUNTEST=$(RUNTEST)" \
852 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
854 # Flags that we pass when building the testsuite.
856 # empty for native, $(target_alias)/ for cross
857 target_subdir = @target_subdir@
860 if [ -f $${rootme}/../gcc/xgcc ] ; then \
861 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
862 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
864 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
867 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
870 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
875 if [ -f $${rootme}/../gcc/xg++ ] ; then \
876 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
877 echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
879 echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/; \
882 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
885 t='$(program_transform_name)'; echo g++ | sed -e '' $$t; \
889 # The use of $$(x_FOR_TARGET) reduces the command line length by not
890 # duplicating the lengthy definition.
891 TARGET_FLAGS_TO_PASS = \
893 "exec_prefix=$(exec_prefix)" \
894 "against=$(against)" \
895 'CC=$$(CC_FOR_TARGET)' \
896 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
898 'CXX=$$(CXX_FOR_TARGET)' \
899 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
900 "CXXFLAGS=$(CXXFLAGS)" \
901 "INSTALL=$(INSTALL)" \
902 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
903 "INSTALL_DATA=$(INSTALL_DATA)" \
904 "MAKEINFO=$(MAKEINFO)" \
905 "MAKEHTML=$(MAKEHTML)" \
906 "RUNTEST=$(RUNTEST)" \
907 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
908 "FORCE_PARALLEL=$(FORCE_PARALLEL)" \
911 # All source files that go into linking GDB.
913 # Files that should wind up in SFILES and whose corresponding .o
914 # should be in COMMON_OBS.
932 break-catch-syscall.c \
933 break-catch-throw.c \
966 dwarf2-frame-tailcall.c \
992 gdbarch-selftests.c \
1043 progspace-and-thread.c \
1070 target-descriptions.c \
1092 # Links made at configuration time should not be specified here, since
1093 # SFILES is used in building the distribution archive.
1125 common/btrace-common.c \
1128 common/common-debug.c \
1129 common/common-exceptions.c \
1130 common/common-regcache.c \
1131 common/common-utils.c \
1135 common/filestuff.c \
1137 common/job-control.c \
1138 common/gdb_tilde_expand.c \
1141 common/print-utils.c \
1144 common/run-time-clock.c \
1147 common/signals-state-save-restore.c \
1149 common/xml-utils.c \
1151 target/waitstatus.c \
1153 $(SUBDIR_GCC_COMPILE_SRCS)
1155 LINTFILES = $(SFILES) $(YYFILES) $(CONFIG_SRCS) init.c
1157 # Header files that need to have srcdir added. Note that in the cases
1158 # where we use a macro like $(gdbcmd_h), things are carefully arranged
1159 # so that each .h file is listed exactly once (M-x tags-search works
1160 # wrong if TAGS has files twice). Because this is tricky to get
1161 # right, it is probably easiest just to list .h files here directly.
1163 HFILES_NO_SRCDIR = \
1169 amd64-darwin-tdep.h \
1170 amd64-linux-tdep.h \
1211 dwarf2-frame-tailcall.h \
1236 gdb_proc_service.h \
1253 hppa-linux-offsets.h \
1256 i386-darwin-tdep.h \
1261 ia64-libunwind-tdep.h \
1314 ppc-ravenscar-thread.h \
1321 progspace-and-thread.h \
1325 ravenscar-thread.h \
1359 sparc-ravenscar-thread.h \
1370 target-descriptions.h \
1400 arch/aarch64-insn.h \
1410 common/common-debug.h \
1411 common/common-defs.h \
1412 common/common-exceptions.h \
1413 common/common-gdbthread.h \
1414 common/common-regcache.h \
1415 common/common-types.h \
1416 common/common-utils.h \
1417 common/job-control.h \
1422 common/gdb_assert.h \
1423 common/gdb_tilde_expand.h \
1424 common/gdb_locale.h \
1425 common/gdb_setjmp.h \
1426 common/gdb_signals.h \
1427 common/gdb_sys_time.h \
1430 common/common-inferior.h \
1431 common/host-defs.h \
1432 common/print-utils.h \
1436 common/run-time-clock.h \
1437 common/signals-state-save-restore.h \
1441 common/x86-xstate.h \
1442 common/xml-utils.h \
1446 config/djgpp/langinfo.h \
1447 config/djgpp/nl_types.h \
1448 config/i386/nm-fbsd.h \
1449 config/i386/nm-i386gnu.h \
1450 config/sparc/nm-sol2.h \
1451 gnulib/import/inttypes.in.h \
1452 gnulib/import/stddef.in.h \
1453 gnulib/import/stdint.in.h \
1454 gnulib/import/str-two-way.h \
1455 gnulib/import/string.in.h \
1456 gnulib/import/extra/snippet/arg-nonnull.h \
1457 gnulib/import/extra/snippet/c++defs.h \
1458 gnulib/import/extra/snippet/warn-on-use.h \
1466 nat/aarch64-linux.h \
1467 nat/aarch64-linux-hw-point.h \
1468 nat/amd64-linux-siginfo.h \
1470 nat/gdb_thread_db.h \
1471 nat/fork-inferior.h \
1472 nat/linux-btrace.h \
1473 nat/linux-namespaces.h \
1475 nat/linux-osdata.h \
1476 nat/linux-personality.h \
1477 nat/linux-ptrace.h \
1478 nat/linux-waitpid.h \
1479 nat/mips-linux-watch.h \
1483 nat/x86-gcc-cpuid.h \
1485 nat/x86-linux-dregs.h \
1487 python/py-events.h \
1488 python/py-stopevent.h \
1490 python/python-internal.h \
1491 regformats/regdef.h \
1495 target/waitstatus.h \
1509 tui/tui-wingeneral.h \
1512 # Header files that already have srcdir in them, or which are in objdir.
1514 HFILES_WITH_SRCDIR = \
1518 # GDB "info" files, which should be included in their entirety
1519 INFOFILES = gdb.info*
1521 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
1522 # default their values the way we do for SER_HARDWIRE; in the future
1523 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
1524 # variables analogous to SER_HARDWIRE which get defaulted in this
1527 DEPFILES = $(TARGET_OBS) $(SER_HARDWIRE) $(NATDEPFILES) \
1528 $(REMOTE_OBS) $(SIM_OBS)
1530 SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES) $(CONFIG_SRCS)
1531 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
1532 # and it's more useful to see it in the .y file.
1533 TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \
1535 TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
1537 COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
1543 common-exceptions.o \
1552 filename-seen-cache.o \
1555 gdb_tilde_expand.o \
1566 signals-state-save-restore.o \
1573 $(patsubst %.c,%.o,$(COMMON_SFILES)) \
1574 $(SUBDIR_GCC_COMPILE_OBS)
1578 SUBDIRS = doc @subdirs@ data-directory $(GNULIB_BUILDDIR)
1579 CLEANDIRS = $(SUBDIRS)
1581 # List of subdirectories in the build tree that must exist.
1582 # This is used to force build failures in existing trees when
1583 # a new directory is added.
1584 # The format here is for the `case' shell command.
1585 REQUIRED_SUBDIRS = doc | testsuite | $(GNULIB_BUILDDIR) | data-directory
1587 # Parser intermediate files.
1600 # ada-lex.c is included by another file, so it shouldn't wind up as a
1602 YYOBJ = $(filter-out ada-lex.o,$(patsubst %.c,%.o,$(YYFILES)))
1604 # Things which need to be built when making a distribution.
1606 DISTSTUFF = $(YYFILES)
1609 # All generated files which can be included by another file.
1618 $(NAT_GENERATED_FILES)
1620 # Flags needed to compile Python code
1621 PYTHON_CFLAGS = @PYTHON_CFLAGS@
1623 all: gdb$(EXEEXT) $(CONFIG_ALL)
1624 @$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
1626 # Rule for compiling .c files in the top-level gdb directory.
1627 # The order-only dependencies ensure that we create the build subdirectories.
1628 %.o: %.c | $(CONFIG_DEP_SUBDIR)
1632 $(CONFIG_DEP_SUBDIR):
1633 $(SHELL) $(srcdir)/../mkinstalldirs $@
1635 # Python files need special flags.
1636 python/%.o: INTERNAL_CFLAGS += $(PYTHON_CFLAGS)
1638 # Rules for compiling .c files in the various source subdirectories.
1639 %.o: ${srcdir}/common/%.c
1643 %.o: $(srcdir)/gdbtk/generic/%.c
1644 $(COMPILE) $(all_gdbtk_cflags) $<
1647 %.o: ${srcdir}/nat/%.c
1651 %.o: ${srcdir}/target/%.c
1655 # Specify an explicit rule for gdb/common/agent.c, to avoid a clash with the
1656 # object file generate by gdb/agent.c.
1657 common-agent.o: $(srcdir)/common/agent.c
1658 $(COMPILE) $(srcdir)/common/agent.c
1663 # The check target can not use subdir_do, because subdir_do does not
1664 # use TARGET_FLAGS_TO_PASS.
1666 @if [ -f testsuite/Makefile ]; then \
1667 rootme=`pwd`; export rootme; \
1668 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1670 $(MAKE) $(TARGET_FLAGS_TO_PASS) check; \
1674 @if [ -f testsuite/Makefile ]; then \
1675 rootme=`pwd`; export rootme; \
1676 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1678 $(MAKE) $(TARGET_FLAGS_TO_PASS) check-perf; \
1682 @if [ -f testsuite/Makefile ]; then \
1683 rootme=`pwd`; export rootme; \
1684 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1686 $(MAKE) $(TARGET_FLAGS_TO_PASS) check-read1; \
1689 check-parallel: force
1690 @if [ -f testsuite/Makefile ]; then \
1691 rootme=`pwd`; export rootme; \
1692 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1694 $(MAKE) $(TARGET_FLAGS_TO_PASS) check-parallel; \
1697 # The idea is to parallelize testing of multilibs, for example:
1698 # make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
1699 # will run 3 concurrent sessions of check, eventually testing all 10
1700 # combinations. GNU make is required for the % pattern to work, as is
1701 # a shell that expands alternations within braces. If GNU make is not
1702 # used, this rule will harmlessly fail to match. Used FORCE_PARALLEL to
1703 # prevent serialized checking due to the passed RUNTESTFLAGS.
1704 # FIXME: use config.status --config not --version, when available.
1706 @if [ -f testsuite/config.status ]; then \
1707 rootme=`pwd`; export rootme; \
1708 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1709 target=`echo "$@" | sed 's,//.*,,'`; \
1710 variant=`echo "$@" | sed 's,^[^/]*//,,'`; \
1711 vardots=`echo "$$variant" | sed 's,/,.,g'`; \
1712 testdir=testsuite.$$vardots; \
1713 if [ ! -f $$testdir/Makefile ] && [ -f testsuite/config.status ]; then \
1714 configargs=`cd testsuite && ./config.status --version | \
1715 sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
1716 $(SHELL) $(srcdir)/../mkinstalldirs $$testdir && \
1718 eval $(SHELL) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
1719 "\"--srcdir=\$$rootsrc/testsuite\"" \
1721 else :; fi && cd $$testdir && \
1722 $(MAKE) $(TARGET_FLAGS_TO_PASS) \
1723 RUNTESTFLAGS="--target_board=$$variant $(RUNTESTFLAGS)" \
1724 FORCE_PARALLEL=$(if $(FORCE_PARALLEL),1,$(if $(RUNTESTFLAGS),,1)) \
1728 # The set of headers checked by 'check-headers' by default.
1729 CHECK_HEADERS = $(HFILES_NO_SRCDIR)
1731 # Try to compile each header in isolation, thus ensuring headers are
1734 # Defaults to checking all $HFILES_NO_SRCDIR headers.
1738 # make check-headers CHECK_HEADERS="header.h list.h"
1740 # to check specific headers.
1743 @echo Checking headers.
1744 for i in $(CHECK_HEADERS) ; do \
1745 $(CXX) $(CXX_DIALECT) -x c++-header -c -fsyntax-only \
1746 $(INTERNAL_CFLAGS) -include defs.h $(srcdir)/$$i ; \
1748 .PHONY: check-headers
1750 info install-info clean-info dvi pdf install-pdf html install-html: force
1751 @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
1753 # Traditionally "install" depends on "all". But it may be useful
1754 # not to; for example, if the user has made some trivial change to a
1755 # source file and doesn't care about rebuilding or just wants to save the
1756 # time it takes for make to check that all is up to date.
1757 # install-only is intended to address that need.
1759 @$(MAKE) $(FLAGS_TO_PASS) install-only
1761 install-only: $(CONFIG_INSTALL)
1762 transformed_name=`t='$(program_transform_name)'; \
1763 echo gdb | sed -e "$$t"` ; \
1764 if test "x$$transformed_name" = x; then \
1765 transformed_name=gdb ; \
1769 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
1770 $(INSTALL_PROGRAM) gdb$(EXEEXT) \
1771 $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1772 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(includedir)/gdb ; \
1773 $(INSTALL_DATA) jit-reader.h $(DESTDIR)$(includedir)/gdb/jit-reader.h
1774 if test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x; \
1776 transformed_name=`t='$(program_transform_name)'; \
1777 echo gcore | sed -e "$$t"` ; \
1778 if test "x$$transformed_name" = x; then \
1779 transformed_name=gcore ; \
1783 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
1784 $(INSTALL_SCRIPT) gcore \
1785 $(DESTDIR)$(bindir)/$$transformed_name; \
1787 @$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
1790 $(MAKE) $(FLAGS_TO_PASS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1791 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1792 `test -z '$(STRIP)' || \
1793 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install-only
1796 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(GDB_DATADIR)/guile/gdb
1799 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(GDB_DATADIR)/python/gdb
1801 uninstall: force $(CONFIG_UNINSTALL)
1802 transformed_name=`t='$(program_transform_name)'; \
1803 echo gdb | sed -e $$t` ; \
1804 if test "x$$transformed_name" = x; then \
1805 transformed_name=gdb ; \
1809 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \
1810 $(DESTDIR)$(man1dir)/$$transformed_name.1
1811 if test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x; \
1813 transformed_name=`t='$(program_transform_name)'; \
1814 echo gcore | sed -e "$$t"` ; \
1815 if test "x$$transformed_name" = x; then \
1816 transformed_name=gcore ; \
1820 rm -f $(DESTDIR)$(bindir)/$$transformed_name; \
1822 @$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
1824 # The C++ name parser can be built standalone for testing.
1825 test-cp-name-parser.o: cp-name-parser.c
1826 $(COMPILE) -DTEST_CPNAMES cp-name-parser.c
1829 test-cp-name-parser$(EXEEXT): test-cp-name-parser.o $(LIBIBERTY)
1830 $(CC_LD) $(INTERNAL_LDFLAGS) -o test-cp-name-parser$(EXEEXT) \
1831 test-cp-name-parser.o $(LIBIBERTY)
1833 # We do this by grepping through sources. If that turns out to be too slow,
1834 # maybe we could just require every .o file to have an initialization routine
1835 # of a given name (top.o -> _initialize_top, etc.).
1837 # Formatting conventions: The name of the _initialize_* routines must start
1838 # in column zero, and must not be inside #if.
1840 # Note that the set of files with init functions might change, or the names
1841 # of the functions might change, so this files needs to depend on all the
1842 # object files that will be linked into gdb.
1844 # FIXME: There is a problem with this approach - init.c may force
1845 # unnecessary files to be linked in.
1847 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
1848 # the first call is to _initialize_gdbtypes (implemented by explicitly
1849 # putting that function's name first in the init.l-tmp file). This is
1850 # a hack to ensure that all the architecture dependant global
1851 # builtin_type_* variables are initialized before anything else
1852 # (per-architecture code is called in the same order that it is
1853 # registered). The ``correct fix'' is to have all the builtin types
1854 # made part of the architecture and initialize them on-demand (using
1855 # gdbarch_data) just like everything else. The catch is that other
1856 # modules still take the address of these builtin types forcing them
1857 # to be variables, sigh!
1859 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1860 # anchored on the first column and excludes the ``/'' character so
1861 # that it doesn't add the $(srcdir) prefix to any file that already
1862 # has an absolute path. It turns out that $(DEC)'s True64 make
1863 # automatically adds the $(srcdir) prefixes when it encounters files
1864 # in sub-directories such as cli/ and mi/.
1866 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
1867 # duplicates. Files in the gdb/ directory can end up appearing in
1868 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
1870 INIT_FILES = $(COMMON_OBS) $(TSOBS) $(CONFIG_SRCS) $(SUBDIR_GCC_COMPILE_SRCS)
1871 init.c: $(INIT_FILES)
1873 @rm -f init.c-tmp init.l-tmp
1875 @echo gdbtypes > init.l-tmp
1876 @-LANG=C ; export LANG ; \
1877 LC_ALL=C ; export LC_ALL ; \
1878 echo $(INIT_FILES) | \
1881 -e '/^gdbtypes.[co]$$/d' \
1882 -e '/^init.[co]$$/d' \
1883 -e '/xdr_ld.[co]$$/d' \
1884 -e '/xdr_ptrace.[co]$$/d' \
1885 -e '/xdr_rdb.[co]$$/d' \
1886 -e '/udr.[co]$$/d' \
1887 -e '/udip2soc.[co]$$/d' \
1888 -e '/udi2go32.[co]$$/d' \
1889 -e '/version.[co]$$/d' \
1890 -e '/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1891 -e '/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
1892 -e 's/-exp\.o$$/-exp.y/' \
1893 -e 's/\.[co]$$/.c/' \
1894 -e 's,signals\.c,common/signals\.c,' \
1895 -e 's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
1897 sed -n -e 's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev/null; \
1902 * ) echo $$f ; fs="$$fs $$f";; \
1905 @echo '/* Do not modify this file. */' >>init.c-tmp
1906 @echo '/* It is created automatically by the Makefile. */'>>init.c-tmp
1907 @echo '#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp
1908 @echo 'extern void initialize_all_files(void);' >>init.c-tmp
1909 @sed -e 's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp >>init.c-tmp
1910 @echo 'void' >>init.c-tmp
1911 @echo 'initialize_all_files (void)' >>init.c-tmp
1912 @echo '{' >>init.c-tmp
1913 @sed -e 's/\(.*\)/ _initialize_\1 ();/' <init.l-tmp >>init.c-tmp
1914 @echo '}' >>init.c-tmp
1916 @mv init.c-tmp init.c
1920 # Create a library of the gdb object files and build GDB by linking
1923 # init.o is very important. It pulls in the rest of GDB.
1924 LIBGDB_OBS = $(COMMON_OBS) $(TSOBS) $(ADD_FILES) init.o
1925 libgdb.a: $(LIBGDB_OBS)
1927 $(AR) q libgdb.a $(LIBGDB_OBS)
1930 # Removing the old gdb first works better if it is running, at least on SunOS.
1931 gdb$(EXEEXT): gdb.o $(LIBGDB_OBS) $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
1933 $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1934 -o gdb$(EXEEXT) gdb.o $(LIBGDB_OBS) \
1935 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1937 # Convenience rule to handle recursion.
1938 $(LIBGNU) $(GNULIB_H): all-lib
1939 all-lib: $(GNULIB_BUILDDIR)/Makefile
1940 @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=$(GNULIB_BUILDDIR) subdir_do
1943 # Convenience rule to handle recursion.
1944 .PHONY: all-data-directory
1945 all-data-directory: data-directory/Makefile
1946 @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=data-directory subdir_do
1948 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1949 # on itself without copying the executable. So "make gdb1" will make
1950 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1951 # Removing gdb1 before the copy is the right thing if gdb1 is open
1952 # in another process.
1953 gdb1$(EXEEXT): gdb$(EXEEXT)
1955 cp gdb$(EXEEXT) gdb1$(EXEEXT)
1957 # Put the proper machine-specific files first, so M-. on a machine
1958 # specific routine gets the one for the correct machine. (FIXME: those
1959 # files go in twice; we should be removing them from the main list).
1961 # TAGS depends on all the files that go into it so you can rebuild TAGS
1962 # with `make TAGS' and not have to say `rm TAGS' first.
1964 GDB_NM_FILE = @GDB_NM_FILE@
1965 TAGS: $(TAGFILES_NO_SRCDIR) $(TAGFILES_WITH_SRCDIR)
1967 etags `(test -n "$(GDB_NM_FILE)" && echo "$(srcdir)/$(GDB_NM_FILE)")` \
1968 `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1969 echo $(srcdir)/$$i ; \
1970 done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1972 done) | sed -e 's/\.o$$/\.c/'` \
1973 `find $(srcdir)/config -name '*.h' -print`
1977 clean mostlyclean: $(CONFIG_CLEAN)
1978 @$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(CLEANDIRS)" subdir_do
1979 rm -f *.o *.a $(ADD_FILES) *~ init.c-tmp init.l-tmp version.c-tmp
1980 rm -f init.c version.c observer.h observer.inc
1981 rm -f gdb$(EXEEXT) core make.log
1982 rm -f gdb[0-9]$(EXEEXT)
1983 rm -f test-cp-name-parser$(EXEEXT)
1984 rm -f xml-builtin.c stamp-xml
1986 for i in $(CONFIG_SRC_SUBDIR); do \
1988 rm -f $$i/$(DEPDIR)/*; \
1991 # This used to depend on c-exp.c m2-exp.c TAGS
1992 # I believe this is wrong; the makefile standards for distclean just
1993 # describe removing files; the only sort of "re-create a distribution"
1994 # functionality described is if the distributed files are unmodified.
1995 # NB: While GDBSERVER might be configured on native systems, it isn't
1996 # always included in SUBDIRS. Remove the gdbserver files explicitly.
1998 @$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1999 rm -rf $(GNULIB_BUILDDIR)
2000 rm -f gdbserver/config.status gdbserver/config.log
2001 rm -f gdbserver/tm.h gdbserver/xm.h gdbserver/nm.h
2002 rm -f gdbserver/Makefile gdbserver/config.cache
2003 rm -f nm.h config.status config.h stamp-h gdb-gdb.gdb jit-reader.h
2004 rm -f y.output yacc.acts yacc.tmp y.tab.h
2005 rm -f config.log config.cache
2008 for i in $(CONFIG_SRC_SUBDIR); do \
2009 rmdir $$i/$(DEPDIR); \
2012 maintainer-clean: local-maintainer-clean do-maintainer-clean distclean
2013 realclean: maintainer-clean
2015 local-maintainer-clean:
2016 @echo "This command is intended for maintainers to use;"
2017 @echo "it deletes files that may require special tools to rebuild."
2020 ada-lex.c ada-exp.c \
2021 d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c rust-exp.c
2022 rm -f TAGS $(INFOFILES)
2024 rm -f nm.h config.status
2026 do-maintainer-clean:
2027 @$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(CLEANDIRS)" \
2030 diststuff: $(DISTSTUFF) $(PACKAGE).pot $(CATALOGS)
2031 cd doc; $(MAKE) $(MFLAGS) diststuff
2034 @for i in $(DODIRS); do \
2036 $(REQUIRED_SUBDIRS)) \
2037 if [ ! -f ./$$i/Makefile ] ; then \
2038 echo "Missing $$i/Makefile" >&2 ; \
2042 if [ -f ./$$i/Makefile ] ; then \
2044 $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
2045 else exit 1 ; fi ; \
2049 Makefile: Makefile.in config.status
2050 # Regenerate the Makefile and the tm.h / nm.h links.
2051 CONFIG_FILES="Makefile" \
2054 $(SHELL) config.status
2056 $(GNULIB_BUILDDIR)/Makefile: gnulib/Makefile.in config.status
2057 @cd $(GNULIB_BUILDDIR); CONFIG_FILES="Makefile" \
2058 CONFIG_COMMANDS="depfiles" \
2061 $(SHELL) config.status
2063 data-directory/Makefile: data-directory/Makefile.in config.status
2064 CONFIG_FILES="data-directory/Makefile" \
2065 CONFIG_COMMANDS="depfiles" \
2068 $(SHELL) config.status
2072 ./gdb$(EXEEXT) --data-directory=`pwd`/data-directory $(GDBFLAGS)
2074 jit-reader.h: $(srcdir)/jit-reader.in
2075 $(SHELL) config.status $@
2077 gcore: $(srcdir)/gcore.in
2078 $(SHELL) config.status $@
2080 config.h: stamp-h ; @true
2081 stamp-h: $(srcdir)/config.in config.status
2082 CONFIG_HEADERS=config.h:config.in \
2083 CONFIG_COMMANDS="default depdir" \
2086 $(SHELL) config.status
2088 config.status: $(srcdir)/configure configure.tgt configure.host ../bfd/development.sh
2089 $(SHELL) config.status --recheck
2092 ACLOCAL_AMFLAGS = -I ../config
2094 # Keep these in sync with the includes in acinclude.m4.
2097 acx_configure_dir.m4 \
2101 ../config/acinclude.m4 \
2102 ../config/plugins.m4 \
2103 ../config/lead-dot.m4 \
2104 ../config/override.m4 \
2105 ../config/largefile.m4 \
2106 ../config/gettext-sister.m4 \
2107 ../config/lib-ld.m4 \
2108 ../config/lib-prefix.m4 \
2109 ../config/lib-link.m4 \
2112 ../config/depstand.m4 \
2113 ../config/lcmessage.m4 \
2114 ../config/codeset.m4 \
2117 $(srcdir)/aclocal.m4: @MAINTAINER_MODE_TRUE@ $(aclocal_m4_deps)
2118 cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
2121 configure_deps = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
2122 $(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(configure_deps)
2123 cd $(srcdir) && $(AUTOCONF)
2125 AUTOHEADER = autoheader
2126 $(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(configure_deps)
2127 cd $(srcdir) && $(AUTOHEADER)
2131 # automatic rebuilding in automake-generated Makefiles requires
2132 # this rule in the toplevel Makefile, which, with GNU make, causes
2133 # the desired updates through the implicit regeneration of the Makefile
2134 # and all of its prerequisites.
2141 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
2143 cd doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS)
2145 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
2147 cd doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS)
2149 # GDB MANUAL: TeX dvi file
2151 cd doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS)
2153 # GDB MANUAL: info file
2155 cd doc; $(MAKE) gdb.info $(FLAGS_TO_PASS)
2157 # Make copying.c from COPYING
2158 $(srcdir)/copying.c: @MAINTAINER_MODE_TRUE@ $(srcdir)/../COPYING3 $(srcdir)/copying.awk
2159 awk -f $(srcdir)/copying.awk \
2160 < $(srcdir)/../COPYING3 > $(srcdir)/copying.tmp
2161 mv $(srcdir)/copying.tmp $(srcdir)/copying.c
2163 version.c: Makefile version.in $(srcdir)/../bfd/version.h $(srcdir)/common/create-version.sh
2164 $(SHELL) $(srcdir)/common/create-version.sh $(srcdir) \
2165 $(host_alias) $(target_alias) version.c
2167 observer.h: observer.sh doc/observer.texi
2168 ${srcdir}/observer.sh h ${srcdir}/doc/observer.texi observer.h
2170 observer.inc: observer.sh doc/observer.texi
2171 ${srcdir}/observer.sh inc ${srcdir}/doc/observer.texi observer.inc
2174 $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
2175 `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
2177 gdb.cxref: $(SFILES)
2178 cxref -I. $(SFILES) >gdb.cxref
2182 # GNU Make has an annoying habit of putting *all* the Makefile variables
2183 # into the environment, unless you include this target as a circumvention.
2184 # Rumor is that this will be fixed (and this target can be removed)
2188 # GNU Make 3.63 has a different problem: it keeps tacking command line
2189 # overrides onto the definition of $(MAKE). This variable setting
2194 aarch64-fbsd-nat.c \
2195 aarch64-fbsd-tdep.c \
2196 aarch64-linux-nat.c \
2197 aarch64-linux-tdep.c \
2198 aarch64-newlib-tdep.c \
2204 alpha-linux-tdep.c \
2205 alpha-mdebug-tdep.c \
2210 amd64-darwin-tdep.c \
2211 amd64-dicos-tdep.c \
2215 amd64-linux-tdep.c \
2228 arm-get-next-pcs.c \
2235 arm-symbian-tdep.c \
2264 i386-cygwin-tdep.c \
2266 i386-darwin-tdep.c \
2283 ia64-libunwind-tdep.c \
2304 microblaze-linux-tdep.c \
2316 mips64-obsd-tdep.c \
2321 nios2-linux-tdep.c \
2334 ppc-ravenscar-thread.c \
2338 ravenscar-thread.c \
2341 rs6000-lynx178-tdep.c \
2361 sparc-linux-tdep.c \
2366 sparc-ravenscar-thread.c \
2370 sparc64-fbsd-nat.c \
2371 sparc64-fbsd-tdep.c \
2372 sparc64-linux-nat.c \
2373 sparc64-linux-tdep.c \
2375 sparc64-nbsd-nat.c \
2376 sparc64-nbsd-tdep.c \
2377 sparc64-obsd-nat.c \
2378 sparc64-obsd-tdep.c \
2379 sparc64-sol2-tdep.c \
2384 tilegx-linux-nat.c \
2385 tilegx-linux-tdep.c \
2397 xtensa-linux-nat.c \
2398 xtensa-linux-tdep.c \
2401 common/mingw-strerror.c \
2402 common/posix-strerror.c
2404 # Some files need explicit build rules (due to -Werror problems) or due
2405 # to sub-directory fun 'n' games.
2407 # Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually
2408 # checks format strings.
2409 printcmd.o: $(srcdir)/printcmd.c
2410 $(COMPILE.pre) $(INTERNAL_CFLAGS) $(GDB_WARN_CFLAGS_NO_FORMAT) \
2411 $(COMPILE.post) $(srcdir)/printcmd.c
2414 # Same for "target-float.c".
2415 target-float.o: $(srcdir)/target-float.c
2416 $(COMPILE.pre) $(INTERNAL_CFLAGS) $(GDB_WARN_CFLAGS_NO_FORMAT) \
2417 $(COMPILE.post) $(srcdir)/target-float.c
2419 # ada-exp.c can appear in srcdir, for releases; or in ., for
2420 # development builds.
2421 ADA_EXP_C = `if test -f ada-exp.c; then echo ada-exp.c; else echo $(srcdir)/ada-exp.c; fi`
2423 # Some versions of flex give output that triggers
2424 # -Wold-style-definition.
2425 ada-exp.o: ada-exp.c
2426 $(COMPILE.pre) $(INTERNAL_CFLAGS) $(GDB_WARN_CFLAGS_NO_DEFS) \
2427 $(COMPILE.post) $(ADA_EXP_C)
2430 # Message files. Based on code in gcc/Makefile.in.
2432 # Rules for generating translated message descriptions. Disabled by
2433 # autoconf if the tools are not available.
2435 .PHONY: all-po install-po uninstall-po clean-po update-po $(PACKAGE).pot
2439 # This notation should be acceptable to all Make implementations used
2440 # by people who are interested in updating .po files.
2441 update-po: $(CATALOGS:.gmo=.pox)
2443 # N.B. We do not attempt to copy these into $(srcdir). The snapshot
2446 -test -d po || mkdir po
2447 $(GMSGFMT) --statistics -o $@ $<
2449 # The new .po has to be gone over by hand, so we deposit it into
2450 # build/po with a different extension. If build/po/$(PACKAGE).pot
2451 # exists, use it (it was just created), else use the one in srcdir.
2453 -test -d po || mkdir po
2454 $(MSGMERGE) $< `if test -f po/$(PACKAGE).pot; \
2455 then echo po/$(PACKAGE).pot; \
2456 else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o $@
2458 # This rule has to look for .gmo modules in both srcdir and the cwd,
2459 # and has to check that we actually have a catalog for each language,
2460 # in case they weren't built or included with the distribution.
2462 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(datadir)
2463 cats="$(CATALOGS)"; for cat in $$cats; do \
2464 lang=`basename $$cat | sed 's/\.gmo$$//'`; \
2465 if [ -f $$cat ]; then :; \
2466 elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
2469 dir=$(localedir)/$$lang/LC_MESSAGES; \
2470 echo $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir; \
2471 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir || exit 1; \
2472 echo $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
2473 $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
2476 cats="$(CATALOGS)"; for cat in $$cats; do \
2477 lang=`basename $$cat | sed 's/\.gmo$$//'`; \
2478 if [ -f $$cat ]; then :; \
2479 elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
2482 dir=$(localedir)/$$lang/LC_MESSAGES; \
2483 rm -f $(DESTDIR)$$dir/$(PACKAGE).mo; \
2485 # Delete po/*.gmo only if we are not building in the source directory.
2487 -if [ ! -f Makefile.in ]; then rm -f po/*.gmo; fi
2489 # Rule for regenerating the message template (gdb.pot). Instead of
2490 # forcing everyone to edit POTFILES.in, which proved impractical, this
2491 # rule has no dependencies and always regenerates gdb.pot. This is
2492 # relatively harmless since the .po files do not directly depend on
2493 # it. The .pot file is left in the build directory. Since GDB's
2494 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
2495 # files) force this rule.
2496 $(PACKAGE).pot: po/$(PACKAGE).pot
2497 po/$(PACKAGE).pot: force
2498 -test -d po || mkdir po
2499 sh -e $(srcdir)/po/gdbtext $(XGETTEXT) $(PACKAGE) . $(srcdir)
2503 # YACC/LEX dependencies
2505 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
2506 # exist in srcdir, then compiled in objdir to LANG-exp.o. If we
2507 # said LANG-exp.c rather than ./c-exp.c some makes would
2508 # sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
2509 # decls for malloc/realloc/free which conflict with everything else.
2510 # Strictly speaking c-exp.c should therefore depend on
2511 # Makefile.in, but that was a pretty big annoyance.
2515 $(SHELL) $(YLWRAP) $< y.tab.c $@ -- $(YACC) $(YFLAGS) && mv $@ $@.tmp \
2516 || (rm -f $@; false)
2517 sed -e '/extern.*malloc/d' \
2518 -e '/extern.*realloc/d' \
2519 -e '/extern.*free/d' \
2520 -e '/include.*malloc.h/d' \
2521 -e 's/\([^x]\)malloc/\1xmalloc/g' \
2522 -e 's/\([^x]\)realloc/\1xrealloc/g' \
2523 -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
2524 -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
2525 -e '/^#line.*y.tab.c/d' \
2526 -e 's/YY_NULL/YY_NULLPTR/g' \
2530 if [ "$(FLEX)" ] && $(FLEX) --version >/dev/null 2>&1; then \
2531 $(FLEX) -o$@ $< && \
2533 sed -e '/extern.*malloc/d' \
2534 -e '/extern.*realloc/d' \
2535 -e '/extern.*free/d' \
2536 -e '/include.*malloc.h/d' \
2537 -e 's/\([^x]\)malloc/\1xmalloc/g' \
2538 -e 's/\([^x]\)realloc/\1xrealloc/g' \
2539 -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
2540 -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
2541 -e 's/yy_flex_xrealloc/yyxrealloc/g' \
2545 elif [ -f $@ ]; then \
2546 echo "Warning: $*.c older than $*.l and flex not available."; \
2548 echo "$@ missing and flex not available."; \
2552 .PRECIOUS: ada-lex.c
2556 xml-builtin.c: stamp-xml; @true
2557 stamp-xml: $(srcdir)/features/feature_to_c.sh Makefile $(XMLFILES)
2558 rm -f xml-builtin.tmp
2560 $(SHELL) $(srcdir)/features/feature_to_c.sh \
2561 xml-builtin.tmp $(XMLFILES)
2562 $(SHELL) $(srcdir)/../move-if-change xml-builtin.tmp xml-builtin.c
2563 echo stamp > stamp-xml
2565 .PRECIOUS: xml-builtin.c
2568 # GDBTK sub-directory
2571 all-gdbtk: insight$(EXEEXT)
2574 transformed_name=`t='$(program_transform_name)'; \
2575 echo insight | sed -e $$t` ; \
2576 if test "x$$transformed_name" = x; then \
2577 transformed_name=insight ; \
2581 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir); \
2582 $(INSTALL_PROGRAM) insight$(EXEEXT) \
2583 $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
2584 $(SHELL) $(srcdir)/../mkinstalldirs \
2585 $(DESTDIR)$(GDBTK_LIBRARY) ; \
2586 $(SHELL) $(srcdir)/../mkinstalldirs \
2587 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION) ; \
2588 $(INSTALL_DATA) $(srcdir)/gdbtk/plugins/plugins.tcl \
2589 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION)/plugins.tcl ; \
2590 $(SHELL) $(srcdir)/../mkinstalldirs \
2591 $(DESTDIR)$(GDBTK_LIBRARY)/images \
2592 $(DESTDIR)$(GDBTK_LIBRARY)/images2 ; \
2593 $(SHELL) $(srcdir)/../mkinstalldirs \
2594 $(DESTDIR)$(GDBTK_LIBRARY)/help \
2595 $(DESTDIR)$(GDBTK_LIBRARY)/help/images \
2596 $(DESTDIR)$(GDBTK_LIBRARY)/help/trace ; \
2597 cd $(srcdir)/gdbtk/library ; \
2598 for i in *.tcl *.itcl *.ith *.itb images/*.gif images2/*.gif images/icons.txt images2/icons.txt tclIndex help/*.html help/trace/*.html help/trace/index.toc help/images/*.gif help/images/*.png; \
2600 $(INSTALL_DATA) $$i $(DESTDIR)$(GDBTK_LIBRARY)/$$i ; \
2604 transformed_name=`t='$(program_transform_name)'; \
2605 echo insight | sed -e $$t` ; \
2606 if test "x$$transformed_name" = x; then \
2607 transformed_name=insight ; \
2611 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
2612 rm -rf $(DESTDIR)$(GDBTK_LIBRARY)
2615 rm -f insight$(EXEEXT)
2617 # Removing the old gdb first works better if it is running, at least on SunOS.
2618 insight$(EXEEXT): gdbtk-main.o libgdb.a $(ADD_DEPS) \
2619 $(CDEPS) $(TDEPLIBS)
2620 rm -f insight$(EXEEXT)
2621 $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
2622 -o insight$(EXEEXT) gdbtk-main.o libgdb.a \
2623 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
2625 gdbres.o: $(srcdir)/gdbtk/gdb.rc $(srcdir)/gdbtk/gdbtool.ico
2626 $(WINDRES) --include $(srcdir)/gdbtk $(srcdir)/gdbtk/gdb.rc gdbres.o
2628 all_gdbtk_cflags = $(IDE_CFLAGS) $(ITCL_CFLAGS) \
2629 $(ITK_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
2631 -DGDBTK_LIBRARY=\"$(GDBTK_LIBRARY)\" \
2632 -DSRC_DIR=\"$(GDBTK_SRC_DIR)\"
2635 # Dependency tracking.
2638 ifeq ($(DEPMODE),depmode=gcc3)
2639 # Note that we put the dependencies into a .Tpo file, then move them
2640 # into place if the compile succeeds. We need this because gcc does
2641 # not atomically write the dependency output file.
2642 override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
2643 -MF $(@D)/$(DEPDIR)/$(basename $(@F)).Tpo
2644 override POSTCOMPILE = @mv $(@D)/$(DEPDIR)/$(basename $(@F)).Tpo \
2645 $(@D)/$(DEPDIR)/$(basename $(@F)).Po
2647 override COMPILE.pre = source='$<' object='$@' libtool=no \
2648 DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) \
2649 $(CXX) -x c++ $(CXX_DIALECT)
2650 # depcomp handles atomicity for us, so we don't need a postcompile
2652 override POSTCOMPILE =
2655 # A list of all the objects we might care about in this build, for
2656 # dependency tracking.
2657 all_object_files = gdb.o $(LIBGDB_OBS) gdbtk-main.o \
2658 test-cp-name-parser.o
2660 # Ensure that generated files are created early. Use order-only
2661 # dependencies if available. They require GNU make 3.80 or newer,
2662 # and the .VARIABLES variable was introduced at the same time.
2664 $(all_object_files): | $(generated_files)
2666 $(all_object_files) : $(generated_files)
2670 -include $(patsubst %.o, $(DEPDIR)/%.Po, $(all_object_files))
2672 # Disable implicit make rules.
2673 include $(srcdir)/disable-implicit-rules.mk
2675 ### end of the gdb Makefile.in.