1 # Copyright (C) 1989-2018 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 3 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see <http://www.gnu.org/licenses/>.
18 # Please keep lists in this file sorted alphabetically, with one item per line.
19 # Here are the general guidelines for ordering files and directories:
21 # - Files come before directories.
22 # - The extensions are not taken into account when comparing filenames, except
23 # if the filenames are otherwise equal.
24 # - A filename that is a prefix of another one comes before.
25 # - Underscores and dashes are treated equally, and come before alphanumeric
38 exec_prefix = @exec_prefix@
40 host_alias = @host_alias@
41 target_alias = @target_alias@
42 program_transform_name = @program_transform_name@
45 tooldir = $(libdir)/$(target_alias)
48 localedir = @localedir@
50 man1dir = $(mandir)/man1
51 man2dir = $(mandir)/man2
52 man3dir = $(mandir)/man3
53 man4dir = $(mandir)/man4
54 man5dir = $(mandir)/man5
55 man6dir = $(mandir)/man6
56 man7dir = $(mandir)/man7
57 man8dir = $(mandir)/man8
58 man9dir = $(mandir)/man9
60 datarootdir = @datarootdir@
64 includedir = @includedir@
66 install_sh = @install_sh@
68 # This can be referenced by `LIBINTL' as computed by
69 # ZW_GNU_GETTEXT_SISTER_DIR.
79 INSTALL_PROGRAM = @INSTALL_PROGRAM@
80 INSTALL_SCRIPT = @INSTALL_SCRIPT@
81 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
82 INSTALL_DATA = @INSTALL_DATA@
103 CXX_DIALECT = @CXX_DIALECT@
105 # Dependency tracking information.
106 DEPMODE = @CCDEPMODE@
108 depcomp = $(SHELL) $(srcdir)/../depcomp
110 # Directory containing source files.
113 top_srcdir = @top_srcdir@
115 include $(srcdir)/silent-rules.mk
117 # Note that these are overridden by GNU make-specific code below if
118 # GNU make is used. The overrides implement dependency tracking.
119 COMPILE.pre = $(CXX) -x c++ $(CXX_DIALECT)
120 COMPILE.post = -c -o $@
121 COMPILE = $(ECHO_CXX) $(COMPILE.pre) $(INTERNAL_CFLAGS) $(COMPILE.post)
126 # This is used to rebuild ada-lex.c from ada-lex.l. If the program is
127 # not defined, but ada-lex.c is present, compilation will continue,
128 # possibly with a warning.
131 YLWRAP = $(srcdir)/../ylwrap
133 # where to find makeinfo, preferably one designed for texinfo-2
134 MAKEINFO = @MAKEINFO@
135 MAKEINFOFLAGS = @MAKEINFOFLAGS@
136 MAKEINFO_EXTRA_FLAGS = @MAKEINFO_EXTRA_FLAGS@
137 MAKEINFO_CMD = $(MAKEINFO) $(MAKEINFOFLAGS) $(MAKEINFO_EXTRA_FLAGS)
139 MAKEHTML = $(MAKEINFO_CMD) --html
142 # Set this up with gcc if you have gnu ld and the loader will print out
143 # line numbers for undefined references.
145 CC_LD = $(CXX) $(CXX_DIALECT)
147 # Where is our "include" directory? Typically $(srcdir)/../include.
148 # This is essentially the header file directory for the library
149 # routines in libiberty.
150 INCLUDE_DIR = $(srcdir)/../include
151 INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
153 # Where is the "-liberty" library? Typically in ../libiberty.
154 LIBIBERTY = ../libiberty/libiberty.a
156 # Where is the BFD library? Typically in ../bfd.
158 BFD = $(BFD_DIR)/libbfd.a
159 BFD_SRC = $(srcdir)/$(BFD_DIR)
160 BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
162 # This is where we get zlib from. zlibdir is -L../zlib and zlibinc is
163 # -I../zlib, unless we were configured with --with-system-zlib, in which
164 # case both are empty.
168 # Where is the decnumber library? Typically in ../libdecnumber.
169 LIBDECNUMBER_DIR = ../libdecnumber
170 LIBDECNUMBER = $(LIBDECNUMBER_DIR)/libdecnumber.a
171 LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)
172 LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)
174 # Where is the READLINE library? Typically in ../readline.
175 READLINE_DIR = ../readline
176 READLINE_SRC = $(srcdir)/$(READLINE_DIR)
177 READLINE = @READLINE@
178 READLINE_DEPS = @READLINE_DEPS@
179 READLINE_CFLAGS = @READLINE_CFLAGS@
181 # Where is expat? This will be empty if expat was not available.
182 LIBEXPAT = @LIBEXPAT@
184 # Where is lzma? This will be empty if lzma was not available.
187 # Where is libbabeltrace? This will be empty if lbabeltrace was not
189 LIBBABELTRACE = @LIBBABELTRACE@
191 # Where is libipt? This will be empty if libipt was not available.
194 # Where is libmpfr? This will be empty if libmpfr was not available.
197 WARN_CFLAGS = @WARN_CFLAGS@
198 WERROR_CFLAGS = @WERROR_CFLAGS@
199 GDB_WARN_CFLAGS = $(WARN_CFLAGS)
200 GDB_WERROR_CFLAGS = $(WERROR_CFLAGS)
202 RDYNAMIC = @RDYNAMIC@
204 # Where is the INTL library? Typically in ../intl.
206 INTL_DEPS = @LIBINTL_DEP@
207 INTL_CFLAGS = @INCINTL@
209 # Where is the ICONV library? This will be empty if in libc or not available.
210 LIBICONV = @LIBICONV@
212 # Did the user give us a --with-gdb-datadir option?
213 GDB_DATADIR = @GDB_DATADIR@
217 CODESIGN_CERT = @CODESIGN_CERT@
219 # Flags to pass to gdb when invoked with "make run".
222 # Helper code from gnulib.
223 GNULIB_BUILDDIR = build-gnulib
224 LIBGNU = $(GNULIB_BUILDDIR)/import/libgnu.a
225 INCGNU = -I$(srcdir)/gnulib/import -I$(GNULIB_BUILDDIR)/import
227 # Generated headers in the gnulib directory. These must be listed
228 # so that they are generated before other files are compiled.
229 GNULIB_H = $(GNULIB_BUILDDIR)/import/string.h @GNULIB_STDINT_H@
232 # CLI sub directory definitons
244 SUBDIR_CLI_OBS = $(patsubst %.c,%.o,$(SUBDIR_CLI_SRCS))
247 # MI sub directory definitons
268 SUBDIR_MI_OBS = $(patsubst %.c,%.o,$(SUBDIR_MI_SRCS))
275 # TUI sub directory definitions
293 tui/tui-wingeneral.c \
296 SUBDIR_TUI_OBS = $(patsubst %.c,%.o,$(SUBDIR_TUI_SRCS))
300 SUBDIR_TUI_CFLAGS = -DTUI=1
303 # GCC Compile support sub-directory definitions
305 SUBDIR_GCC_COMPILE_SRCS = \
307 compile/compile-c-support.c \
308 compile/compile-c-symbols.c \
309 compile/compile-c-types.c \
310 compile/compile-cplus-symbols.c \
311 compile/compile-cplus-types.c \
312 compile/compile-loc2c.c \
313 compile/compile-object-load.c \
314 compile/compile-object-run.c
316 SUBDIR_GCC_COMPILE_OBS = $(patsubst %.c,%.o,$(filter %.c,$(SUBDIR_GCC_COMPILE_SRCS)))
319 # Guile sub directory definitons for guile support.
321 SUBDIR_GUILE_SRCS = \
324 guile/scm-auto-load.c \
326 guile/scm-breakpoint.c \
329 guile/scm-exception.c \
332 guile/scm-iterator.c \
333 guile/scm-lazy-string.c \
335 guile/scm-objfile.c \
338 guile/scm-pretty-print.c \
339 guile/scm-progspace.c \
340 guile/scm-safe-call.c \
348 SUBDIR_GUILE_OBS = $(patsubst %.c,%.o,$(SUBDIR_GUILE_SRCS))
351 SUBDIR_GUILE_LDFLAGS =
352 SUBDIR_GUILE_CFLAGS =
355 # python sub directory definitons
357 SUBDIR_PYTHON_SRCS = \
359 python/py-auto-load.c \
361 python/py-bpevent.c \
362 python/py-breakpoint.c \
364 python/py-continueevent.c \
366 python/py-evtregistry.c \
368 python/py-exitedevent.c \
369 python/py-finishbreakpoint.c \
371 python/py-framefilter.c \
372 python/py-function.c \
373 python/py-gdb-readline.c \
374 python/py-inferior.c \
375 python/py-infevents.c \
376 python/py-infthread.c \
377 python/py-instruction.c \
378 python/py-lazy-string.c \
379 python/py-linetable.c \
380 python/py-newobjfileevent.c \
381 python/py-objfile.c \
383 python/py-prettyprint.c \
384 python/py-progspace.c \
386 python/py-record-btrace.c \
387 python/py-record-full.c \
388 python/py-signalevent.c \
389 python/py-stopevent.c \
392 python/py-threadevent.c \
398 python/py-xmethods.c \
401 SUBDIR_PYTHON_OBS = $(patsubst %.c,%.o,$(SUBDIR_PYTHON_SRCS))
404 SUBDIR_PYTHON_LDFLAGS =
405 SUBDIR_PYTHON_CFLAGS =
407 SUBDIR_UNITTESTS_SRCS = \
408 unittests/array-view-selftests.c \
409 unittests/cli-utils-selftests.c \
410 unittests/common-utils-selftests.c \
411 unittests/environ-selftests.c \
412 unittests/format_pieces-selftests.c \
413 unittests/function-view-selftests.c \
414 unittests/lookup_name_info-selftests.c \
415 unittests/memory-map-selftests.c \
416 unittests/memrange-selftests.c \
417 unittests/offset-type-selftests.c \
418 unittests/observable-selftests.c \
419 unittests/optional-selftests.c \
420 unittests/parse-connection-spec-selftests.c \
421 unittests/ptid-selftests.c \
422 unittests/rsp-low-selftests.c \
423 unittests/scoped_fd-selftests.c \
424 unittests/scoped_mmap-selftests.c \
425 unittests/scoped_restore-selftests.c \
426 unittests/string_view-selftests.c \
427 unittests/tracepoint-selftests.c \
428 unittests/unpack-selftests.c \
429 unittests/utils-selftests.c \
430 unittests/xml-utils-selftests.c
432 SUBDIR_UNITTESTS_OBS = $(patsubst %.c,%.o,$(SUBDIR_UNITTESTS_SRCS))
434 SUBDIR_TARGET_SRCS = target/waitstatus.c
435 SUBDIR_TARGET_OBS = $(patsubst %.c,%.o,$(SUBDIR_TARGET_SRCS))
438 # Opcodes currently live in one of two places. Either they are in the
439 # opcode library, typically ../opcodes, or they are in a header file
441 # Where is the "-lopcodes" library, with (some of) the opcode tables and
443 OPCODES_DIR = ../opcodes
444 OPCODES_SRC = $(srcdir)/$(OPCODES_DIR)
445 OPCODES = $(OPCODES_DIR)/libopcodes.a
446 # Where are the other opcode tables which only have header file
448 OP_INCLUDE = $(INCLUDE_DIR)/opcode
449 OPCODES_CFLAGS = -I$(OP_INCLUDE)
451 # The simulator is usually nonexistent; targets that include one
452 # should set this to list all the .o or .a files to be linked in.
455 WIN32LIBS = @WIN32LIBS@
457 # Tcl et al cflags and libraries
459 TCL_CFLAGS = @TCL_INCLUDE@
460 GDBTKLIBS = @GDBTKLIBS@
461 # Extra flags that the GDBTK files need:
462 GDBTK_CFLAGS = @GDBTK_CFLAGS@
465 TK_CFLAGS = @TK_INCLUDE@
467 X11_CFLAGS = @TK_XINCLUDES@
471 WIN32LDAPP = @WIN32LDAPP@
474 GUI_CFLAGS_X = @GUI_CFLAGS_X@
475 IDE_CFLAGS = $(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
477 ALL_TCL_CFLAGS = $(TCL_CFLAGS) $(TK_CFLAGS)
479 # The version of gdbtk we're building. This should be kept
480 # in sync with GDBTK_VERSION and friends in gdbtk.h.
482 GDBTK_LIBRARY = $(datadir)/insight$(GDBTK_VERSION)
484 # Gdbtk requires an absolute path to the source directory or
485 # the testsuite won't run properly.
486 GDBTK_SRC_DIR = @GDBTK_SRC_DIR@
499 SUBDIR_GDBTK_SRCS = \
500 gdbtk/generic/gdbtk.c \
501 gdbtk/generic/gdbtk-bp.c \
502 gdbtk/generic/gdbtk-cmds.c \
503 gdbtk/generic/gdbtk-hooks.c \
504 gdbtk/generic/gdbtk-interp.c \
505 gdbtk/generic/gdbtk-main.c \
506 gdbtk/generic/gdbtk-register.c \
507 gdbtk/generic/gdbtk-stack.c \
508 gdbtk/generic/gdbtk-varobj.c \
509 gdbtk/generic/gdbtk-wrapper.c
511 SUBDIR_GDBTK_DEPS = $(LIBGUI) $(TCL_DEPS) $(TK_DEPS)
512 SUBDIR_GDBTK_LDFLAGS =
513 SUBDIR_GDBTK_CFLAGS = -DGDBTK
515 CONFIG_OBS = @CONFIG_OBS@
516 CONFIG_SRCS = @CONFIG_SRCS@
517 CONFIG_DEPS = @CONFIG_DEPS@
518 CONFIG_LDFLAGS = @CONFIG_LDFLAGS@
519 ENABLE_CFLAGS = @ENABLE_CFLAGS@
520 CONFIG_ALL = @CONFIG_ALL@
521 CONFIG_CLEAN = @CONFIG_CLEAN@
522 CONFIG_INSTALL = @CONFIG_INSTALL@
523 CONFIG_UNINSTALL = @CONFIG_UNINSTALL@
524 HAVE_NATIVE_GCORE_TARGET = @HAVE_NATIVE_GCORE_TARGET@
526 CONFIG_SRC_SUBDIR = arch cli mi common compile tui unittests guile python target
527 CONFIG_DEP_SUBDIR = $(addsuffix /$(DEPDIR),$(CONFIG_SRC_SUBDIR))
529 # -I. for config files.
530 # -I$(srcdir) for gdb internal headers.
531 # -I$(srcdir)/config for more generic config files.
533 # It is also possible that you will need to add -I/usr/include/sys if
534 # your system doesn't have fcntl.h in /usr/include (which is where it
535 # should be according to Posix).
537 GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/common -I$(srcdir)/config \
538 -DLOCALEDIR="\"$(localedir)\"" $(DEFS)
540 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
541 GLOBAL_CFLAGS = $(MH_CFLAGS)
543 PROFILE_CFLAGS = @PROFILE_CFLAGS@
545 # These are specifically reserved for setting from the command line
546 # when running make. I.E.: "make CFLAGS=-Wmissing-prototypes".
548 CXXFLAGS = @CXXFLAGS@
549 CPPFLAGS = @CPPFLAGS@
551 # Set by configure, for e.g. expat. Python installations are such that
552 # C headers are included using their basename (for example, we #include
553 # <Python.h> rather than, say, <python/Python.h>). Since the file names
554 # are sometimes a little generic, we think that the risk of collision
555 # with other header files is high. If that happens, we try to mitigate
556 # a bit the consequences by putting the Python includes last in the list.
557 INTERNAL_CPPFLAGS = $(CPPFLAGS) @GUILE_CPPFLAGS@ @PYTHON_CPPFLAGS@
559 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
560 INTERNAL_CFLAGS_BASE = \
561 $(CXXFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
562 $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) $(ZLIBINC) \
563 $(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \
564 $(INTL_CFLAGS) $(INCGNU) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS)
565 INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS)
566 INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS)
568 # LDFLAGS is specifically reserved for setting from the command line
572 # Profiling options need to go here to work.
573 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
574 # and have it work; that's why CFLAGS is here.
575 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
577 $(CXXFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) \
578 $(LDFLAGS) $(CONFIG_LDFLAGS)
580 # If your system is missing alloca(), or, more likely, it's there but
581 # it doesn't work, then refer to libiberty.
583 # Libraries and corresponding dependencies for compiling gdb.
584 # XM_CLIBS, defined in *config files, have host-dependent libs.
585 # LIBIBERTY appears twice on purpose.
586 CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(ZLIB) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
587 $(XM_CLIBS) $(GDBTKLIBS) \
588 @LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \
589 $(LIBEXPAT) $(LIBLZMA) $(LIBBABELTRACE) $(LIBIPT) \
590 $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU) $(LIBICONV) $(LIBMPFR)
591 CDEPS = $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
592 $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
599 # XML files to build in to GDB.
601 $(srcdir)/features/btrace.dtd \
602 $(srcdir)/features/btrace-conf.dtd \
603 $(srcdir)/features/gdb-target.dtd \
604 $(srcdir)/features/library-list.dtd \
605 $(srcdir)/features/library-list-aix.dtd \
606 $(srcdir)/features/library-list-svr4.dtd \
607 $(srcdir)/features/osdata.dtd \
608 $(srcdir)/features/threads.dtd \
609 $(srcdir)/features/traceframe-info.dtd \
610 $(srcdir)/features/xinclude.dtd
612 # Build the ser-*.o files the host supports. This includes ser-unix.o
613 # for any system that supports a POSIX interface to the serial port.
615 SER_HARDWIRE = @SER_HARDWIRE@
617 # This is remote-sim.o if a simulator is to be linked in.
620 # Target-dependent object files.
621 TARGET_OBS = @TARGET_OBS@
623 # All target-dependent objects files that require 64-bit CORE_ADDR
624 # (used with --enable-targets=all --enable-64-bit-bfd).
625 ALL_64_TARGET_OBS = \
626 aarch64-fbsd-tdep.o \
627 aarch64-linux-tdep.o \
628 aarch64-newlib-tdep.o \
632 alpha-mdebug-tdep.o \
636 amd64-darwin-tdep.o \
644 amd64-windows-tdep.o \
646 arch/aarch64-insn.o \
652 sparc64-fbsd-tdep.o \
653 sparc64-linux-tdep.o \
654 sparc64-nbsd-tdep.o \
655 sparc64-obsd-tdep.o \
656 sparc64-sol2-tdep.o \
659 # All other target-dependent objects files (used with --enable-targets=all).
663 arch/arm-get-next-pcs.o \
666 arch/ppc-linux-common.o \
721 microblaze-linux-tdep.o \
728 mn10300-linux-tdep.o \
743 ppc-ravenscar-thread.o \
751 rs6000-lynx178-tdep.o \
770 sparc-ravenscar-thread.o \
778 tilegx-linux-tdep.o \
788 xtensa-linux-tdep.o \
791 # The following native-target dependent variables are defined on
793 NAT_FILE = @NAT_FILE@
794 NATDEPFILES = @NATDEPFILES@
795 NAT_CDEPS = @NAT_CDEPS@
796 LOADLIBES = @LOADLIBES@
797 MH_CFLAGS = @MH_CFLAGS@
798 XM_CLIBS = @XM_CLIBS@
799 NAT_GENERATED_FILES = @NAT_GENERATED_FILES@
800 HAVE_NATIVE_GCORE_HOST = @HAVE_NATIVE_GCORE_HOST@
802 # Native-target dependent makefile fragment comes in here.
805 # End of native-target dependent variables.
809 "exec_prefix=$(exec_prefix)" \
810 "infodir=$(infodir)" \
811 "datarootdir=$(datarootdir)" \
813 "htmldir=$(htmldir)" \
817 "datadir=$(datadir)" \
818 "includedir=$(includedir)" \
819 "against=$(against)" \
820 "DESTDIR=$(DESTDIR)" \
822 "AR_FLAGS=$(AR_FLAGS)" \
826 "CXX_DIALECT=$(CXX_DIALECT)" \
827 "CXXFLAGS=$(CXXFLAGS)" \
828 "DLLTOOL=$(DLLTOOL)" \
829 "LDFLAGS=$(LDFLAGS)" \
831 "MAKEINFO=$(MAKEINFO)" \
832 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
833 "MAKEINFO_EXTRA_FLAGS=$(MAKEINFO_EXTRA_FLAGS)" \
834 "MAKEHTML=$(MAKEHTML)" \
835 "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
836 "INSTALL=$(INSTALL)" \
837 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
838 "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
839 "INSTALL_DATA=$(INSTALL_DATA)" \
840 "RUNTEST=$(RUNTEST)" \
841 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
843 # Flags that we pass when building the testsuite.
845 # empty for native, $(target_alias)/ for cross
846 target_subdir = @target_subdir@
849 if [ -f $${rootme}/../gcc/xgcc ] ; then \
850 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
851 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
853 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
856 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
859 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
864 if [ -f $${rootme}/../gcc/xg++ ] ; then \
865 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
866 echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
868 echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/; \
871 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
874 t='$(program_transform_name)'; echo g++ | sed -e '' $$t; \
878 # The use of $$(x_FOR_TARGET) reduces the command line length by not
879 # duplicating the lengthy definition.
880 TARGET_FLAGS_TO_PASS = \
882 "exec_prefix=$(exec_prefix)" \
883 "against=$(against)" \
884 'CC=$$(CC_FOR_TARGET)' \
885 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
887 'CXX=$$(CXX_FOR_TARGET)' \
888 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
889 "CXXFLAGS=$(CXXFLAGS)" \
890 "INSTALL=$(INSTALL)" \
891 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
892 "INSTALL_DATA=$(INSTALL_DATA)" \
893 "MAKEINFO=$(MAKEINFO)" \
894 "MAKEHTML=$(MAKEHTML)" \
895 "RUNTEST=$(RUNTEST)" \
896 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
897 "FORCE_PARALLEL=$(FORCE_PARALLEL)" \
900 # All source files that go into linking GDB.
902 # Files that should wind up in SFILES and whose corresponding .o
903 # should be in COMMON_OBS.
923 break-catch-syscall.c \
924 break-catch-throw.c \
939 common/btrace-common.c \
942 common/common-debug.c \
943 common/common-exceptions.c \
944 common/common-regcache.c \
945 common/common-utils.c \
951 common/job-control.c \
952 common/gdb_tilde_expand.c \
957 common/print-utils.c \
960 common/run-time-clock.c \
961 common/scoped_mmap.c \
963 common/signals-state-save-restore.c \
989 dwarf-index-cache.c \
990 dwarf-index-common.c \
991 dwarf-index-write.c \
993 dwarf2-frame-tailcall.c \
1007 filename-seen-cache.c \
1021 gdbarch-selftests.c \
1073 progspace-and-thread.c \
1104 target-descriptions.c \
1130 # Links made at configuration time should not be specified here, since
1131 # SFILES is used in building the distribution archive.
1155 $(SUBDIR_CLI_SRCS) \
1156 $(SUBDIR_TARGET_SRCS) \
1158 $(SUBDIR_GCC_COMPILE_SRCS)
1160 # Header files that need to have srcdir added. Note that in the cases
1161 # where we use a macro like $(gdbcmd_h), things are carefully arranged
1162 # so that each .h file is listed exactly once (M-x tags-search works
1163 # wrong if TAGS has files twice). Because this is tricky to get
1164 # right, it is probably easiest just to list .h files here directly.
1166 HFILES_NO_SRCDIR = \
1172 amd64-darwin-tdep.h \
1173 amd64-linux-tdep.h \
1215 dwarf-index-cache.h \
1216 dwarf-index-common.h \
1218 dwarf2-frame-tailcall.h \
1244 gdb_proc_service.h \
1261 hppa-linux-offsets.h \
1264 i386-darwin-tdep.h \
1269 ia64-libunwind-tdep.h \
1321 ppc-ravenscar-thread.h \
1328 progspace-and-thread.h \
1332 ravenscar-thread.h \
1367 sparc-ravenscar-thread.h \
1378 target-descriptions.h \
1408 arch/aarch64-insn.h \
1411 arch/ppc-linux-common.h \
1412 arch/ppc-linux-tdesc.h \
1420 common/common-debug.h \
1421 common/common-defs.h \
1422 common/common-exceptions.h \
1423 common/common-gdbthread.h \
1424 common/common-regcache.h \
1425 common/common-types.h \
1426 common/common-utils.h \
1427 common/job-control.h \
1432 common/gdb_assert.h \
1433 common/gdb_tilde_expand.h \
1434 common/gdb_locale.h \
1435 common/gdb_proc_service.h \
1436 common/gdb_setjmp.h \
1437 common/gdb_signals.h \
1438 common/gdb_sys_time.h \
1441 common/common-inferior.h \
1443 common/host-defs.h \
1444 common/pathstuff.h \
1445 common/print-utils.h \
1449 common/run-time-clock.h \
1450 common/signals-state-save-restore.h \
1455 common/x86-xstate.h \
1456 common/xml-utils.h \
1458 compile/compile-c.h \
1459 compile/compile-cplus.h \
1460 compile/compile-internal.h \
1461 compile/compile-object-load.h \
1462 compile/compile-object-run.h \
1463 compile/gcc-c-plugin.h \
1464 compile/gcc-cp-plugin.h \
1467 config/djgpp/langinfo.h \
1468 config/djgpp/nl_types.h \
1469 config/i386/nm-fbsd.h \
1470 config/i386/nm-i386gnu.h \
1471 config/sparc/nm-sol2.h \
1472 gnulib/import/inttypes.in.h \
1473 gnulib/import/stddef.in.h \
1474 gnulib/import/stdint.in.h \
1475 gnulib/import/str-two-way.h \
1476 gnulib/import/string.in.h \
1477 gnulib/import/extra/snippet/arg-nonnull.h \
1478 gnulib/import/extra/snippet/c++defs.h \
1479 gnulib/import/extra/snippet/warn-on-use.h \
1487 nat/aarch64-linux.h \
1488 nat/aarch64-linux-hw-point.h \
1489 nat/aarch64-sve-linux-ptrace.h \
1490 nat/amd64-linux-siginfo.h \
1492 nat/gdb_thread_db.h \
1493 nat/fork-inferior.h \
1494 nat/linux-btrace.h \
1495 nat/linux-namespaces.h \
1497 nat/linux-osdata.h \
1498 nat/linux-personality.h \
1499 nat/linux-ptrace.h \
1500 nat/linux-waitpid.h \
1501 nat/mips-linux-watch.h \
1505 nat/x86-gcc-cpuid.h \
1507 nat/x86-linux-dregs.h \
1509 python/py-events.h \
1510 python/py-stopevent.h \
1512 python/python-internal.h \
1513 regformats/regdef.h \
1517 target/waitstatus.h \
1531 tui/tui-wingeneral.h \
1532 tui/tui-winsource.h \
1535 # Header files that already have srcdir in them, or which are in objdir.
1537 HFILES_WITH_SRCDIR = \
1541 # GDB "info" files, which should be included in their entirety
1542 INFOFILES = gdb.info*
1544 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
1545 # default their values the way we do for SER_HARDWIRE; in the future
1546 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
1547 # variables analogous to SER_HARDWIRE which get defaulted in this
1550 DEPFILES = $(TARGET_OBS) $(SER_HARDWIRE) $(NATDEPFILES) $(SIM_OBS)
1552 SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES) $(CONFIG_SRCS)
1553 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
1554 # and it's more useful to see it in the .y file.
1555 TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \
1557 TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
1559 COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
1563 $(patsubst %.c,%.o,$(COMMON_SFILES)) \
1565 $(SUBDIR_TARGET_OBS) \
1566 $(SUBDIR_GCC_COMPILE_OBS)
1568 SUBDIRS = doc @subdirs@ data-directory $(GNULIB_BUILDDIR)
1569 CLEANDIRS = $(SUBDIRS)
1571 # List of subdirectories in the build tree that must exist.
1572 # This is used to force build failures in existing trees when
1573 # a new directory is added.
1574 # The format here is for the `case' shell command.
1575 REQUIRED_SUBDIRS = doc | testsuite | $(GNULIB_BUILDDIR) | data-directory
1577 # Parser intermediate files.
1590 # ada-lex.c is included by another file, so it shouldn't wind up as a
1592 YYOBJ = $(filter-out ada-lex.o,$(patsubst %.c,%.o,$(YYFILES)))
1594 # Things which need to be built when making a distribution.
1596 DISTSTUFF = $(YYFILES)
1599 # All generated files which can be included by another file.
1606 $(NAT_GENERATED_FILES)
1608 # Flags needed to compile Python code
1609 PYTHON_CFLAGS = @PYTHON_CFLAGS@
1611 all: gdb$(EXEEXT) $(CONFIG_ALL) gdb-gdb.py gdb-gdb.gdb
1612 @$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
1614 # Rule for compiling .c files in the top-level gdb directory.
1615 # The order-only dependencies ensure that we create the build subdirectories.
1616 %.o: %.c | $(CONFIG_DEP_SUBDIR)
1620 $(CONFIG_DEP_SUBDIR):
1621 $(SHELL) $(srcdir)/../mkinstalldirs $@
1623 # Python files need special flags.
1624 python/%.o: INTERNAL_CFLAGS += $(PYTHON_CFLAGS)
1626 # Rules for compiling .c files in the various source subdirectories.
1627 %.o: $(srcdir)/gdbtk/generic/%.c
1628 $(COMPILE) $(all_gdbtk_cflags) $<
1631 %.o: ${srcdir}/nat/%.c
1637 # The check target can not use subdir_do, because subdir_do does not
1638 # use TARGET_FLAGS_TO_PASS.
1640 @if [ -f testsuite/Makefile ]; then \
1641 rootme=`pwd`; export rootme; \
1642 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1644 $(MAKE) $(TARGET_FLAGS_TO_PASS) check; \
1648 @if [ -f testsuite/Makefile ]; then \
1649 rootme=`pwd`; export rootme; \
1650 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1652 $(MAKE) $(TARGET_FLAGS_TO_PASS) check-perf; \
1656 @if [ -f testsuite/Makefile ]; then \
1657 rootme=`pwd`; export rootme; \
1658 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1660 $(MAKE) $(TARGET_FLAGS_TO_PASS) check-read1; \
1663 check-parallel: force
1664 @if [ -f testsuite/Makefile ]; then \
1665 rootme=`pwd`; export rootme; \
1666 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1668 $(MAKE) $(TARGET_FLAGS_TO_PASS) check-parallel; \
1671 # The idea is to parallelize testing of multilibs, for example:
1672 # make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
1673 # will run 3 concurrent sessions of check, eventually testing all 10
1674 # combinations. GNU make is required for the % pattern to work, as is
1675 # a shell that expands alternations within braces. If GNU make is not
1676 # used, this rule will harmlessly fail to match. Used FORCE_PARALLEL to
1677 # prevent serialized checking due to the passed RUNTESTFLAGS.
1678 # FIXME: use config.status --config not --version, when available.
1680 @if [ -f testsuite/config.status ]; then \
1681 rootme=`pwd`; export rootme; \
1682 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1683 target=`echo "$@" | sed 's,//.*,,'`; \
1684 variant=`echo "$@" | sed 's,^[^/]*//,,'`; \
1685 vardots=`echo "$$variant" | sed 's,/,.,g'`; \
1686 testdir=testsuite.$$vardots; \
1687 if [ ! -f $$testdir/Makefile ] && [ -f testsuite/config.status ]; then \
1688 configargs=`cd testsuite && ./config.status --version | \
1689 sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
1690 $(SHELL) $(srcdir)/../mkinstalldirs $$testdir && \
1692 eval $(SHELL) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
1693 "\"--srcdir=\$$rootsrc/testsuite\"" \
1695 else :; fi && cd $$testdir && \
1696 $(MAKE) $(TARGET_FLAGS_TO_PASS) \
1697 RUNTESTFLAGS="--target_board=$$variant $(RUNTESTFLAGS)" \
1698 FORCE_PARALLEL=$(if $(FORCE_PARALLEL),1,$(if $(RUNTESTFLAGS),,1)) \
1702 # The set of headers checked by 'check-headers' by default.
1703 CHECK_HEADERS = $(HFILES_NO_SRCDIR)
1705 # Try to compile each header in isolation, thus ensuring headers are
1708 # Defaults to checking all $HFILES_NO_SRCDIR headers.
1712 # make check-headers CHECK_HEADERS="header.h list.h"
1714 # to check specific headers.
1717 @echo Checking headers.
1718 for i in $(CHECK_HEADERS) ; do \
1719 $(CXX) $(CXX_DIALECT) -x c++-header -c -fsyntax-only \
1720 $(INTERNAL_CFLAGS) -include defs.h $(srcdir)/$$i ; \
1722 .PHONY: check-headers
1724 info install-info clean-info dvi pdf install-pdf html install-html: force
1725 @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
1727 # Traditionally "install" depends on "all". But it may be useful
1728 # not to; for example, if the user has made some trivial change to a
1729 # source file and doesn't care about rebuilding or just wants to save the
1730 # time it takes for make to check that all is up to date.
1731 # install-only is intended to address that need.
1733 @$(MAKE) $(FLAGS_TO_PASS) install-only
1735 install-only: $(CONFIG_INSTALL)
1736 transformed_name=`t='$(program_transform_name)'; \
1737 echo gdb | sed -e "$$t"` ; \
1738 if test "x$$transformed_name" = x; then \
1739 transformed_name=gdb ; \
1743 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
1744 $(INSTALL_PROGRAM) gdb$(EXEEXT) \
1745 $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1746 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(includedir)/gdb ; \
1747 $(INSTALL_DATA) jit-reader.h $(DESTDIR)$(includedir)/gdb/jit-reader.h
1748 if test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x; \
1750 transformed_name=`t='$(program_transform_name)'; \
1751 echo gcore | sed -e "$$t"` ; \
1752 if test "x$$transformed_name" = x; then \
1753 transformed_name=gcore ; \
1757 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
1758 $(INSTALL_SCRIPT) gcore \
1759 $(DESTDIR)$(bindir)/$$transformed_name; \
1761 transformed_name=`t='$(program_transform_name)'; \
1762 echo gdb-add-index | sed -e "$$t"` ; \
1763 if test "x$$transformed_name" = x; then \
1764 transformed_name=gdb-add-index ; \
1768 $(INSTALL_SCRIPT) $(srcdir)/contrib/gdb-add-index.sh \
1769 $(DESTDIR)$(bindir)/$$transformed_name
1770 @$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
1773 $(MAKE) $(FLAGS_TO_PASS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1774 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1775 `test -z '$(STRIP)' || \
1776 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install-only
1779 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(GDB_DATADIR)/guile/gdb
1782 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(GDB_DATADIR)/python/gdb
1784 uninstall: force $(CONFIG_UNINSTALL)
1785 transformed_name=`t='$(program_transform_name)'; \
1786 echo gdb | sed -e $$t` ; \
1787 if test "x$$transformed_name" = x; then \
1788 transformed_name=gdb ; \
1792 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \
1793 $(DESTDIR)$(man1dir)/$$transformed_name.1
1794 if test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x; \
1796 transformed_name=`t='$(program_transform_name)'; \
1797 echo gcore | sed -e "$$t"` ; \
1798 if test "x$$transformed_name" = x; then \
1799 transformed_name=gcore ; \
1803 rm -f $(DESTDIR)$(bindir)/$$transformed_name; \
1805 @$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
1807 # The C++ name parser can be built standalone for testing.
1808 test-cp-name-parser.o: cp-name-parser.c
1809 $(COMPILE) -DTEST_CPNAMES cp-name-parser.c
1812 test-cp-name-parser$(EXEEXT): test-cp-name-parser.o $(LIBIBERTY)
1813 $(ECHO_CXXLD) $(CC_LD) $(INTERNAL_LDFLAGS) \
1814 -o test-cp-name-parser$(EXEEXT) test-cp-name-parser.o \
1817 # We do this by grepping through sources. If that turns out to be too slow,
1818 # maybe we could just require every .o file to have an initialization routine
1819 # of a given name (top.o -> _initialize_top, etc.).
1821 # Formatting conventions: The name of the _initialize_* routines must start
1822 # in column zero, and must not be inside #if.
1824 # Note that the set of files with init functions might change, or the names
1825 # of the functions might change, so this files needs to depend on all the
1826 # object files that will be linked into gdb.
1828 # FIXME: There is a problem with this approach - init.c may force
1829 # unnecessary files to be linked in.
1831 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
1832 # the first call is to _initialize_gdbtypes (implemented by explicitly
1833 # putting that function's name first in the init.l-tmp file). This is
1834 # a hack to ensure that all the architecture dependant global
1835 # builtin_type_* variables are initialized before anything else
1836 # (per-architecture code is called in the same order that it is
1837 # registered). The ``correct fix'' is to have all the builtin types
1838 # made part of the architecture and initialize them on-demand (using
1839 # gdbarch_data) just like everything else. The catch is that other
1840 # modules still take the address of these builtin types forcing them
1841 # to be variables, sigh!
1843 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1844 # anchored on the first column and excludes the ``/'' character so
1845 # that it doesn't add the $(srcdir) prefix to any file that already
1846 # has an absolute path. It turns out that $(DEC)'s True64 make
1847 # automatically adds the $(srcdir) prefixes when it encounters files
1848 # in sub-directories such as cli/ and mi/.
1850 INIT_FILES = $(COMMON_OBS)
1851 init.c: stamp-init; @true
1852 stamp-init: $(INIT_FILES)
1853 @$(ECHO_INIT_C) echo "Making init.c"
1854 @rm -f init.c-tmp init.l-tmp
1856 @echo gdbtypes > init.l-tmp
1857 @-LANG=C ; export LANG ; \
1858 LC_ALL=C ; export LC_ALL ; \
1859 echo $(INIT_FILES) | \
1862 -e '/^gdbtypes.[co]$$/d' \
1863 -e '/^init.[co]$$/d' \
1864 -e '/version.[co]$$/d' \
1865 -e '/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1866 -e 's/-exp\.o$$/-exp.y/' \
1868 -e 's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
1870 sed -n -e 's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev/null; \
1872 @echo '/* Do not modify this file. */' >>init.c-tmp
1873 @echo '/* It is created automatically by the Makefile. */'>>init.c-tmp
1874 @echo '#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp
1875 @echo 'extern void initialize_all_files(void);' >>init.c-tmp
1876 @sed -e 's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp >>init.c-tmp
1877 @echo 'void' >>init.c-tmp
1878 @echo 'initialize_all_files (void)' >>init.c-tmp
1879 @echo '{' >>init.c-tmp
1880 @sed -e 's/\(.*\)/ _initialize_\1 ();/' <init.l-tmp >>init.c-tmp
1881 @echo '}' >>init.c-tmp
1882 @$(SHELL) $(srcdir)/../move-if-change init.c-tmp init.c
1883 @echo stamp > stamp-init
1887 # Create a library of the gdb object files and build GDB by linking
1890 # init.o is very important. It pulls in the rest of GDB.
1891 LIBGDB_OBS = $(sort $(COMMON_OBS)) init.o
1892 libgdb.a: $(LIBGDB_OBS)
1894 $(AR) q libgdb.a $(LIBGDB_OBS)
1897 # Removing the old gdb first works better if it is running, at least on SunOS.
1898 gdb$(EXEEXT): gdb.o $(LIBGDB_OBS) $(CDEPS) $(TDEPLIBS)
1899 $(SILENCE) rm -f gdb$(EXEEXT)
1900 $(ECHO_CXXLD) $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1901 -o gdb$(EXEEXT) gdb.o $(LIBGDB_OBS) \
1902 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1903 ifneq ($(CODESIGN_CERT),)
1904 $(ECHO_SIGN) $(CODESIGN) -s $(CODESIGN_CERT) gdb$(EXEEXT)
1907 # Convenience rule to handle recursion.
1908 $(LIBGNU) $(GNULIB_H): all-lib
1909 all-lib: $(GNULIB_BUILDDIR)/Makefile
1910 @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=$(GNULIB_BUILDDIR) subdir_do
1913 # Convenience rule to handle recursion.
1914 .PHONY: all-data-directory
1915 all-data-directory: data-directory/Makefile
1916 @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=data-directory subdir_do
1918 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1919 # on itself without copying the executable. So "make gdb1" will make
1920 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1921 # Removing gdb1 before the copy is the right thing if gdb1 is open
1922 # in another process.
1923 gdb1$(EXEEXT): gdb$(EXEEXT)
1925 cp gdb$(EXEEXT) gdb1$(EXEEXT)
1927 # Put the proper machine-specific files first, so M-. on a machine
1928 # specific routine gets the one for the correct machine. (FIXME: those
1929 # files go in twice; we should be removing them from the main list).
1931 # TAGS depends on all the files that go into it so you can rebuild TAGS
1932 # with `make TAGS' and not have to say `rm TAGS' first.
1934 GDB_NM_FILE = @GDB_NM_FILE@
1935 TAGS: $(TAGFILES_NO_SRCDIR) $(TAGFILES_WITH_SRCDIR)
1937 etags `(test -n "$(GDB_NM_FILE)" && echo "$(srcdir)/$(GDB_NM_FILE)")` \
1938 `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1939 echo $(srcdir)/$$i ; \
1940 done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1942 done) | sed -e 's/\.o$$/\.c/'` \
1943 `find $(srcdir)/config -name '*.h' -print`
1947 clean mostlyclean: $(CONFIG_CLEAN)
1948 @$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(CLEANDIRS)" subdir_do
1949 rm -f *.o *.a *~ init.c-tmp init.l-tmp version.c-tmp
1950 rm -f init.c stamp-init version.c stamp-version
1951 rm -f gdb$(EXEEXT) core make.log
1952 rm -f gdb[0-9]$(EXEEXT)
1953 rm -f test-cp-name-parser$(EXEEXT)
1954 rm -f xml-builtin.c stamp-xml
1956 for i in $(CONFIG_SRC_SUBDIR); do \
1958 rm -f $$i/$(DEPDIR)/*; \
1961 # This used to depend on c-exp.c m2-exp.c TAGS
1962 # I believe this is wrong; the makefile standards for distclean just
1963 # describe removing files; the only sort of "re-create a distribution"
1964 # functionality described is if the distributed files are unmodified.
1965 # NB: While GDBSERVER might be configured on native systems, it isn't
1966 # always included in SUBDIRS. Remove the gdbserver files explicitly.
1968 @$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1969 rm -rf $(GNULIB_BUILDDIR)
1970 rm -f gdbserver/config.status gdbserver/config.log
1971 rm -f gdbserver/tm.h gdbserver/xm.h gdbserver/nm.h
1972 rm -f gdbserver/Makefile gdbserver/config.cache
1973 rm -f nm.h config.status config.h stamp-h b jit-reader.h
1974 rm -f gdb-gdb.py gdb-gdb.gdb
1975 rm -f y.output yacc.acts yacc.tmp y.tab.h
1976 rm -f config.log config.cache
1979 for i in $(CONFIG_SRC_SUBDIR); do \
1980 if test -d $$i/$(DEPDIR); then rmdir $$i/$(DEPDIR); fi \
1983 maintainer-clean: local-maintainer-clean do-maintainer-clean distclean
1984 realclean: maintainer-clean
1986 local-maintainer-clean:
1987 @echo "This command is intended for maintainers to use;"
1988 @echo "it deletes files that may require special tools to rebuild."
1991 ada-lex.c ada-exp.c \
1992 d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c rust-exp.c
1993 rm -f TAGS $(INFOFILES)
1995 rm -f nm.h config.status
1997 do-maintainer-clean:
1998 @$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(CLEANDIRS)" \
2001 diststuff: $(DISTSTUFF) $(PACKAGE).pot $(CATALOGS)
2002 cd doc; $(MAKE) $(MFLAGS) diststuff
2005 @for i in $(DODIRS); do \
2007 $(REQUIRED_SUBDIRS)) \
2008 if [ ! -f ./$$i/Makefile ] ; then \
2009 echo "Missing $$i/Makefile" >&2 ; \
2013 if [ -f ./$$i/Makefile ] ; then \
2015 $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
2016 else exit 1 ; fi ; \
2020 Makefile: Makefile.in config.status
2021 # Regenerate the Makefile and the tm.h / nm.h links.
2022 CONFIG_FILES="Makefile" \
2025 $(SHELL) config.status
2027 $(GNULIB_BUILDDIR)/Makefile: gnulib/Makefile.in config.status
2028 @cd $(GNULIB_BUILDDIR); CONFIG_FILES="Makefile" \
2029 CONFIG_COMMANDS="depfiles" \
2032 $(SHELL) config.status
2034 data-directory/Makefile: data-directory/Makefile.in config.status
2035 CONFIG_FILES="data-directory/Makefile" \
2036 CONFIG_COMMANDS="depfiles" \
2039 $(SHELL) config.status
2043 ./gdb$(EXEEXT) --data-directory=`pwd`/data-directory $(GDBFLAGS)
2045 jit-reader.h: $(srcdir)/jit-reader.in
2046 $(SHELL) config.status $@
2048 gcore: $(srcdir)/gcore.in
2049 $(SHELL) config.status $@
2051 gdb-gdb.py: $(srcdir)/gdb-gdb.py.in
2052 $(SHELL) config.status $@
2054 gdb-gdb.gdb: $(srcdir)/gdb-gdb.gdb.in
2055 $(SHELL) config.status $@
2057 config.h: stamp-h ; @true
2058 stamp-h: $(srcdir)/config.in config.status
2059 CONFIG_HEADERS=config.h:config.in \
2060 CONFIG_COMMANDS="default depdir" \
2063 $(SHELL) config.status
2065 config.status: $(srcdir)/configure configure.nat configure.tgt configure.host ../bfd/development.sh
2066 $(SHELL) config.status --recheck
2069 ACLOCAL_AMFLAGS = -I ../config
2071 # Keep these in sync with the includes in acinclude.m4.
2074 acx_configure_dir.m4 \
2078 ../config/acinclude.m4 \
2079 ../config/plugins.m4 \
2080 ../config/lead-dot.m4 \
2081 ../config/override.m4 \
2082 ../config/largefile.m4 \
2083 ../config/gettext-sister.m4 \
2084 ../config/lib-ld.m4 \
2085 ../config/lib-prefix.m4 \
2086 ../config/lib-link.m4 \
2089 ../config/depstand.m4 \
2090 ../config/lcmessage.m4 \
2091 ../config/codeset.m4 \
2094 $(srcdir)/aclocal.m4: @MAINTAINER_MODE_TRUE@ $(aclocal_m4_deps)
2095 cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
2098 configure_deps = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
2099 $(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(configure_deps)
2100 cd $(srcdir) && $(AUTOCONF)
2102 AUTOHEADER = autoheader
2103 $(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(configure_deps)
2104 cd $(srcdir) && $(AUTOHEADER)
2108 # automatic rebuilding in automake-generated Makefiles requires
2109 # this rule in the toplevel Makefile, which, with GNU make, causes
2110 # the desired updates through the implicit regeneration of the Makefile
2111 # and all of its prerequisites.
2118 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
2120 cd doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS)
2122 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
2124 cd doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS)
2126 # GDB MANUAL: TeX dvi file
2128 cd doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS)
2130 # GDB MANUAL: info file
2132 cd doc; $(MAKE) gdb.info $(FLAGS_TO_PASS)
2134 # Make copying.c from COPYING
2135 $(srcdir)/copying.c: @MAINTAINER_MODE_TRUE@ $(srcdir)/../COPYING3 $(srcdir)/copying.awk
2136 awk -f $(srcdir)/copying.awk \
2137 < $(srcdir)/../COPYING3 > $(srcdir)/copying.tmp
2138 mv $(srcdir)/copying.tmp $(srcdir)/copying.c
2140 version.c: stamp-version; @true
2141 # Note that the obvious names for the temp file are taken by
2142 # create-version.sh.
2143 stamp-version: Makefile version.in $(srcdir)/../bfd/version.h $(srcdir)/common/create-version.sh
2144 $(ECHO_GEN) $(SHELL) $(srcdir)/common/create-version.sh $(srcdir) \
2145 $(host_alias) $(target_alias) version-t.t
2146 @$(SHELL) $(srcdir)/../move-if-change version-t.t version.c
2147 @echo stamp > stamp-version
2150 gdb.cxref: $(SFILES)
2151 cxref -I. $(SFILES) >gdb.cxref
2155 # GNU Make has an annoying habit of putting *all* the Makefile variables
2156 # into the environment, unless you include this target as a circumvention.
2157 # Rumor is that this will be fixed (and this target can be removed)
2161 # GNU Make 3.63 has a different problem: it keeps tacking command line
2162 # overrides onto the definition of $(MAKE). This variable setting
2167 aarch64-fbsd-nat.c \
2168 aarch64-fbsd-tdep.c \
2169 aarch64-linux-nat.c \
2170 aarch64-linux-tdep.c \
2171 aarch64-newlib-tdep.c \
2177 alpha-linux-tdep.c \
2178 alpha-mdebug-tdep.c \
2183 amd64-darwin-tdep.c \
2184 amd64-dicos-tdep.c \
2188 amd64-linux-tdep.c \
2201 arm-get-next-pcs.c \
2208 arm-symbian-tdep.c \
2236 i386-cygwin-tdep.c \
2238 i386-darwin-tdep.c \
2254 ia64-libunwind-tdep.c \
2273 microblaze-linux-tdep.c \
2285 mips64-obsd-tdep.c \
2290 nios2-linux-tdep.c \
2303 ppc-ravenscar-thread.c \
2307 ravenscar-thread.c \
2310 riscv-linux-tdep.c \
2313 rs6000-lynx178-tdep.c \
2334 sparc-linux-tdep.c \
2339 sparc-ravenscar-thread.c \
2343 sparc64-fbsd-nat.c \
2344 sparc64-fbsd-tdep.c \
2345 sparc64-linux-nat.c \
2346 sparc64-linux-tdep.c \
2348 sparc64-nbsd-nat.c \
2349 sparc64-nbsd-tdep.c \
2350 sparc64-obsd-nat.c \
2351 sparc64-obsd-tdep.c \
2352 sparc64-sol2-tdep.c \
2357 tilegx-linux-nat.c \
2358 tilegx-linux-tdep.c \
2371 xtensa-linux-nat.c \
2372 xtensa-linux-tdep.c \
2375 common/mingw-strerror.c \
2376 common/posix-strerror.c
2378 # Some files need explicit build rules (due to -Werror problems) or due
2379 # to sub-directory fun 'n' games.
2381 # ada-exp.c can appear in srcdir, for releases; or in ., for
2382 # development builds.
2383 ADA_EXP_C = `if test -f ada-exp.c; then echo ada-exp.c; else echo $(srcdir)/ada-exp.c; fi`
2385 ada-exp.o: ada-exp.c
2386 $(COMPILE) $(ADA_EXP_C)
2389 # Message files. Based on code in gcc/Makefile.in.
2391 # Rules for generating translated message descriptions. Disabled by
2392 # autoconf if the tools are not available.
2394 .PHONY: all-po install-po uninstall-po clean-po update-po $(PACKAGE).pot
2398 # This notation should be acceptable to all Make implementations used
2399 # by people who are interested in updating .po files.
2400 update-po: $(CATALOGS:.gmo=.pox)
2402 # N.B. We do not attempt to copy these into $(srcdir). The snapshot
2405 -test -d po || mkdir po
2406 $(GMSGFMT) --statistics -o $@ $<
2408 # The new .po has to be gone over by hand, so we deposit it into
2409 # build/po with a different extension. If build/po/$(PACKAGE).pot
2410 # exists, use it (it was just created), else use the one in srcdir.
2412 -test -d po || mkdir po
2413 $(MSGMERGE) $< `if test -f po/$(PACKAGE).pot; \
2414 then echo po/$(PACKAGE).pot; \
2415 else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o $@
2417 # This rule has to look for .gmo modules in both srcdir and the cwd,
2418 # and has to check that we actually have a catalog for each language,
2419 # in case they weren't built or included with the distribution.
2421 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(datadir)
2422 cats="$(CATALOGS)"; for cat in $$cats; do \
2423 lang=`basename $$cat | sed 's/\.gmo$$//'`; \
2424 if [ -f $$cat ]; then :; \
2425 elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
2428 dir=$(localedir)/$$lang/LC_MESSAGES; \
2429 echo $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir; \
2430 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir || exit 1; \
2431 echo $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
2432 $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
2435 cats="$(CATALOGS)"; for cat in $$cats; do \
2436 lang=`basename $$cat | sed 's/\.gmo$$//'`; \
2437 if [ -f $$cat ]; then :; \
2438 elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
2441 dir=$(localedir)/$$lang/LC_MESSAGES; \
2442 rm -f $(DESTDIR)$$dir/$(PACKAGE).mo; \
2444 # Delete po/*.gmo only if we are not building in the source directory.
2446 -if [ ! -f Makefile.in ]; then rm -f po/*.gmo; fi
2448 # Rule for regenerating the message template (gdb.pot). Instead of
2449 # forcing everyone to edit POTFILES.in, which proved impractical, this
2450 # rule has no dependencies and always regenerates gdb.pot. This is
2451 # relatively harmless since the .po files do not directly depend on
2452 # it. The .pot file is left in the build directory. Since GDB's
2453 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
2454 # files) force this rule.
2455 $(PACKAGE).pot: po/$(PACKAGE).pot
2456 po/$(PACKAGE).pot: force
2457 -test -d po || mkdir po
2458 sh -e $(srcdir)/po/gdbtext $(XGETTEXT) $(PACKAGE) . $(srcdir)
2462 # YACC/LEX dependencies
2464 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
2465 # exist in srcdir, then compiled in objdir to LANG-exp.o. If we
2466 # said LANG-exp.c rather than ./c-exp.c some makes would
2467 # sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
2468 # decls for malloc/realloc/free which conflict with everything else.
2469 # Strictly speaking c-exp.c should therefore depend on
2470 # Makefile.in, but that was a pretty big annoyance.
2473 $(ECHO_YACC) $(SHELL) $(YLWRAP) $< y.tab.c $@.tmp -- \
2474 $(YACC) $(YFLAGS) || (rm -f $@.tmp; false)
2475 @sed -e '/extern.*malloc/d' \
2476 -e '/extern.*realloc/d' \
2477 -e '/extern.*free/d' \
2478 -e '/include.*malloc.h/d' \
2479 -e 's/\([^x]\)malloc/\1xmalloc/g' \
2480 -e 's/\([^x]\)realloc/\1xrealloc/g' \
2481 -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
2482 -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
2483 -e '/^#line.*y.tab.c/d' \
2484 -e 's/YY_NULL/YY_NULLPTR/g' \
2485 < $@.tmp > $@.new && \
2489 $(ECHO_LEX) $(FLEX) -t $< \
2490 | sed -e '/extern.*malloc/d' \
2491 -e '/extern.*realloc/d' \
2492 -e '/extern.*free/d' \
2493 -e '/include.*malloc.h/d' \
2494 -e 's/\([^x]\)malloc/\1xmalloc/g' \
2495 -e 's/\([^x]\)realloc/\1xrealloc/g' \
2496 -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
2497 -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
2498 -e 's/yy_flex_xrealloc/yyxrealloc/g' \
2502 .PRECIOUS: ada-lex.c
2506 xml-builtin.c: stamp-xml; @true
2507 stamp-xml: $(srcdir)/features/feature_to_c.sh Makefile $(XMLFILES)
2508 $(SILENCE) rm -f xml-builtin.tmp
2509 $(ECHO_GEN_XML_BUILTIN) AWK="$(AWK)" \
2510 $(SHELL) $(srcdir)/features/feature_to_c.sh \
2511 xml-builtin.tmp $(XMLFILES)
2512 $(SILENCE) $(SHELL) $(srcdir)/../move-if-change xml-builtin.tmp xml-builtin.c
2513 $(SILENCE) echo stamp > stamp-xml
2515 .PRECIOUS: xml-builtin.c
2518 # GDBTK sub-directory
2521 all-gdbtk: insight$(EXEEXT)
2524 transformed_name=`t='$(program_transform_name)'; \
2525 echo insight | sed -e $$t` ; \
2526 if test "x$$transformed_name" = x; then \
2527 transformed_name=insight ; \
2531 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir); \
2532 $(INSTALL_PROGRAM) insight$(EXEEXT) \
2533 $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
2534 $(SHELL) $(srcdir)/../mkinstalldirs \
2535 $(DESTDIR)$(GDBTK_LIBRARY) ; \
2536 $(SHELL) $(srcdir)/../mkinstalldirs \
2537 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION) ; \
2538 $(INSTALL_DATA) $(srcdir)/gdbtk/plugins/plugins.tcl \
2539 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION)/plugins.tcl ; \
2540 $(SHELL) $(srcdir)/../mkinstalldirs \
2541 $(DESTDIR)$(GDBTK_LIBRARY)/images \
2542 $(DESTDIR)$(GDBTK_LIBRARY)/images2 ; \
2543 $(SHELL) $(srcdir)/../mkinstalldirs \
2544 $(DESTDIR)$(GDBTK_LIBRARY)/help \
2545 $(DESTDIR)$(GDBTK_LIBRARY)/help/images \
2546 $(DESTDIR)$(GDBTK_LIBRARY)/help/trace ; \
2547 cd $(srcdir)/gdbtk/library ; \
2548 for i in *.tcl *.itcl *.ith *.itb images/*.gif images2/*.gif images/icons.txt images2/icons.txt tclIndex help/*.html help/trace/*.html help/trace/index.toc help/images/*.gif help/images/*.png; \
2550 $(INSTALL_DATA) $$i $(DESTDIR)$(GDBTK_LIBRARY)/$$i ; \
2554 transformed_name=`t='$(program_transform_name)'; \
2555 echo insight | sed -e $$t` ; \
2556 if test "x$$transformed_name" = x; then \
2557 transformed_name=insight ; \
2561 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
2562 rm -rf $(DESTDIR)$(GDBTK_LIBRARY)
2565 rm -f insight$(EXEEXT)
2567 # Removing the old gdb first works better if it is running, at least on SunOS.
2568 insight$(EXEEXT): gdbtk-main.o libgdb.a $(CDEPS) $(TDEPLIBS)
2569 rm -f insight$(EXEEXT)
2570 $(ECHO_CXXLD) $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
2571 -o insight$(EXEEXT) gdbtk-main.o libgdb.a \
2572 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
2574 gdbres.o: $(srcdir)/gdbtk/gdb.rc $(srcdir)/gdbtk/gdbtool.ico
2575 $(WINDRES) --include $(srcdir)/gdbtk $(srcdir)/gdbtk/gdb.rc gdbres.o
2577 all_gdbtk_cflags = $(IDE_CFLAGS) $(ITCL_CFLAGS) \
2578 $(ITK_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
2580 -DGDBTK_LIBRARY=\"$(GDBTK_LIBRARY)\" \
2581 -DSRC_DIR=\"$(GDBTK_SRC_DIR)\"
2584 # Dependency tracking.
2587 ifeq ($(DEPMODE),depmode=gcc3)
2588 # Note that we put the dependencies into a .Tpo file, then move them
2589 # into place if the compile succeeds. We need this because gcc does
2590 # not atomically write the dependency output file.
2591 override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
2592 -MF $(@D)/$(DEPDIR)/$(basename $(@F)).Tpo
2593 override POSTCOMPILE = @mv $(@D)/$(DEPDIR)/$(basename $(@F)).Tpo \
2594 $(@D)/$(DEPDIR)/$(basename $(@F)).Po
2596 override COMPILE.pre = source='$<' object='$@' libtool=no \
2597 DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) \
2598 $(CXX) -x c++ $(CXX_DIALECT)
2599 # depcomp handles atomicity for us, so we don't need a postcompile
2601 override POSTCOMPILE =
2604 # A list of all the objects we might care about in this build, for
2605 # dependency tracking.
2606 all_object_files = gdb.o $(LIBGDB_OBS) gdbtk-main.o \
2607 test-cp-name-parser.o
2609 # All the .deps files to include.
2610 all_deps_files = $(foreach dep,$(patsubst %.o,%.Po,$(all_object_files)),\
2611 $(dir $(dep))/$(DEPDIR)/$(notdir $(dep)))
2613 # Ensure that generated files are created early. Use order-only
2614 # dependencies if available. They require GNU make 3.80 or newer,
2615 # and the .VARIABLES variable was introduced at the same time.
2617 $(all_object_files): | $(generated_files)
2619 $(all_object_files) : $(generated_files)
2623 -include $(all_deps_files)
2625 # Disable implicit make rules.
2626 include $(srcdir)/disable-implicit-rules.mk
2628 ### end of the gdb Makefile.in.