1 # Copyright (C) 1989-2018 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 3 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see <http://www.gnu.org/licenses/>.
18 # Please keep lists in this file sorted alphabetically, with one item per line.
19 # Here are the general guidelines for ordering files and directories:
21 # - Files come before directories.
22 # - The extensions are not taken into account when comparing filenames, except
23 # if the filenames are otherwise equal.
24 # - A filename that is a prefix of another one comes before.
25 # - Underscores and dashes are treated equally, and come before alphanumeric
38 exec_prefix = @exec_prefix@
40 host_alias = @host_alias@
41 target_alias = @target_alias@
42 program_transform_name = @program_transform_name@
45 tooldir = $(libdir)/$(target_alias)
48 localedir = @localedir@
50 man1dir = $(mandir)/man1
51 man2dir = $(mandir)/man2
52 man3dir = $(mandir)/man3
53 man4dir = $(mandir)/man4
54 man5dir = $(mandir)/man5
55 man6dir = $(mandir)/man6
56 man7dir = $(mandir)/man7
57 man8dir = $(mandir)/man8
58 man9dir = $(mandir)/man9
60 datarootdir = @datarootdir@
64 includedir = @includedir@
66 install_sh = @install_sh@
68 # This can be referenced by `LIBINTL' as computed by
69 # ZW_GNU_GETTEXT_SISTER_DIR.
79 INSTALL_PROGRAM = @INSTALL_PROGRAM@
80 INSTALL_SCRIPT = @INSTALL_SCRIPT@
81 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
82 INSTALL_DATA = @INSTALL_DATA@
103 CXX_DIALECT = @CXX_DIALECT@
105 # Dependency tracking information.
106 DEPMODE = @CCDEPMODE@
108 depcomp = $(SHELL) $(srcdir)/../depcomp
110 # Directory containing source files.
113 top_srcdir = @top_srcdir@
115 include $(srcdir)/silent-rules.mk
117 # Note that these are overridden by GNU make-specific code below if
118 # GNU make is used. The overrides implement dependency tracking.
119 COMPILE.pre = $(CXX) -x c++ $(CXX_DIALECT)
120 COMPILE.post = -c -o $@
121 COMPILE = $(ECHO_CXX) $(COMPILE.pre) $(INTERNAL_CFLAGS) $(COMPILE.post)
126 # This is used to rebuild ada-lex.c from ada-lex.l. If the program is
127 # not defined, but ada-lex.c is present, compilation will continue,
128 # possibly with a warning.
131 YLWRAP = $(srcdir)/../ylwrap
133 # where to find makeinfo, preferably one designed for texinfo-2
134 MAKEINFO = @MAKEINFO@
135 MAKEINFOFLAGS = @MAKEINFOFLAGS@
136 MAKEINFO_EXTRA_FLAGS = @MAKEINFO_EXTRA_FLAGS@
137 MAKEINFO_CMD = $(MAKEINFO) $(MAKEINFOFLAGS) $(MAKEINFO_EXTRA_FLAGS)
139 MAKEHTML = $(MAKEINFO_CMD) --html
142 # Set this up with gcc if you have gnu ld and the loader will print out
143 # line numbers for undefined references.
145 CC_LD = $(CXX) $(CXX_DIALECT)
147 # Where is our "include" directory? Typically $(srcdir)/../include.
148 # This is essentially the header file directory for the library
149 # routines in libiberty.
150 INCLUDE_DIR = $(srcdir)/../include
151 INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
153 # Where is the "-liberty" library? Typically in ../libiberty.
154 LIBIBERTY = ../libiberty/libiberty.a
156 # Where is the BFD library? Typically in ../bfd.
158 BFD = $(BFD_DIR)/libbfd.a
159 BFD_SRC = $(srcdir)/$(BFD_DIR)
160 BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
162 # This is where we get zlib from. zlibdir is -L../zlib and zlibinc is
163 # -I../zlib, unless we were configured with --with-system-zlib, in which
164 # case both are empty.
168 # Where is the decnumber library? Typically in ../libdecnumber.
169 LIBDECNUMBER_DIR = ../libdecnumber
170 LIBDECNUMBER = $(LIBDECNUMBER_DIR)/libdecnumber.a
171 LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)
172 LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)
174 # Where is the READLINE library? Typically in ../readline.
175 READLINE_DIR = ../readline
176 READLINE_SRC = $(srcdir)/$(READLINE_DIR)
177 READLINE = @READLINE@
178 READLINE_DEPS = @READLINE_DEPS@
179 READLINE_CFLAGS = @READLINE_CFLAGS@
181 # Where is expat? This will be empty if expat was not available.
182 LIBEXPAT = @LIBEXPAT@
184 # Where is lzma? This will be empty if lzma was not available.
187 # Where is libbabeltrace? This will be empty if lbabeltrace was not
189 LIBBABELTRACE = @LIBBABELTRACE@
191 # Where is libipt? This will be empty if libipt was not available.
194 # Where is libmpfr? This will be empty if libmpfr was not available.
197 WARN_CFLAGS = @WARN_CFLAGS@
198 WERROR_CFLAGS = @WERROR_CFLAGS@
199 GDB_WARN_CFLAGS = $(WARN_CFLAGS)
200 GDB_WERROR_CFLAGS = $(WERROR_CFLAGS)
202 GDB_WARN_CFLAGS_NO_DEFS = `echo " $(GDB_WARN_CFLAGS) " \
203 | sed "s/ -Wold-style-definition / -Wno-old-style-definition /g"`
205 RDYNAMIC = @RDYNAMIC@
207 # Where is the INTL library? Typically in ../intl.
209 INTL_DEPS = @LIBINTL_DEP@
210 INTL_CFLAGS = @INCINTL@
212 # Where is the ICONV library? This will be empty if in libc or not available.
213 LIBICONV = @LIBICONV@
215 # Did the user give us a --with-gdb-datadir option?
216 GDB_DATADIR = @GDB_DATADIR@
220 CODESIGN_CERT = @CODESIGN_CERT@
222 # Flags to pass to gdb when invoked with "make run".
225 # Helper code from gnulib.
226 GNULIB_BUILDDIR = build-gnulib
227 LIBGNU = $(GNULIB_BUILDDIR)/import/libgnu.a
228 INCGNU = -I$(srcdir)/gnulib/import -I$(GNULIB_BUILDDIR)/import
230 # Generated headers in the gnulib directory. These must be listed
231 # so that they are generated before other files are compiled.
232 GNULIB_H = $(GNULIB_BUILDDIR)/import/string.h @GNULIB_STDINT_H@
235 # CLI sub directory definitons
247 SUBDIR_CLI_OBS = $(patsubst %.c,%.o,$(SUBDIR_CLI_SRCS))
250 # MI sub directory definitons
271 SUBDIR_MI_OBS = $(patsubst %.c,%.o,$(SUBDIR_MI_SRCS))
278 # TUI sub directory definitions
296 tui/tui-wingeneral.c \
299 SUBDIR_TUI_OBS = $(patsubst %.c,%.o,$(SUBDIR_TUI_SRCS))
303 SUBDIR_TUI_CFLAGS = -DTUI=1
306 # GCC Compile support sub-directory definitions
308 SUBDIR_GCC_COMPILE_SRCS = \
310 compile/compile-c-support.c \
311 compile/compile-c-symbols.c \
312 compile/compile-c-types.c \
313 compile/compile-cplus-symbols.c \
314 compile/compile-cplus-types.c \
315 compile/compile-loc2c.c \
316 compile/compile-object-load.c \
317 compile/compile-object-run.c
319 SUBDIR_GCC_COMPILE_OBS = $(patsubst %.c,%.o,$(filter %.c,$(SUBDIR_GCC_COMPILE_SRCS)))
322 # Guile sub directory definitons for guile support.
324 SUBDIR_GUILE_SRCS = \
327 guile/scm-auto-load.c \
329 guile/scm-breakpoint.c \
332 guile/scm-exception.c \
335 guile/scm-iterator.c \
336 guile/scm-lazy-string.c \
338 guile/scm-objfile.c \
341 guile/scm-pretty-print.c \
342 guile/scm-progspace.c \
343 guile/scm-safe-call.c \
351 SUBDIR_GUILE_OBS = $(patsubst %.c,%.o,$(SUBDIR_GUILE_SRCS))
354 SUBDIR_GUILE_LDFLAGS =
355 SUBDIR_GUILE_CFLAGS =
358 # python sub directory definitons
360 SUBDIR_PYTHON_SRCS = \
362 python/py-auto-load.c \
364 python/py-bpevent.c \
365 python/py-breakpoint.c \
367 python/py-continueevent.c \
369 python/py-evtregistry.c \
371 python/py-exitedevent.c \
372 python/py-finishbreakpoint.c \
374 python/py-framefilter.c \
375 python/py-function.c \
376 python/py-gdb-readline.c \
377 python/py-inferior.c \
378 python/py-infevents.c \
379 python/py-infthread.c \
380 python/py-instruction.c \
381 python/py-lazy-string.c \
382 python/py-linetable.c \
383 python/py-newobjfileevent.c \
384 python/py-objfile.c \
386 python/py-prettyprint.c \
387 python/py-progspace.c \
389 python/py-record-btrace.c \
390 python/py-record-full.c \
391 python/py-signalevent.c \
392 python/py-stopevent.c \
395 python/py-threadevent.c \
401 python/py-xmethods.c \
404 SUBDIR_PYTHON_OBS = $(patsubst %.c,%.o,$(SUBDIR_PYTHON_SRCS))
407 SUBDIR_PYTHON_LDFLAGS =
408 SUBDIR_PYTHON_CFLAGS =
410 SUBDIR_UNITTESTS_SRCS = \
411 unittests/array-view-selftests.c \
412 unittests/cli-utils-selftests.c \
413 unittests/common-utils-selftests.c \
414 unittests/environ-selftests.c \
415 unittests/format_pieces-selftests.c \
416 unittests/function-view-selftests.c \
417 unittests/lookup_name_info-selftests.c \
418 unittests/memory-map-selftests.c \
419 unittests/memrange-selftests.c \
420 unittests/offset-type-selftests.c \
421 unittests/observable-selftests.c \
422 unittests/optional-selftests.c \
423 unittests/parse-connection-spec-selftests.c \
424 unittests/ptid-selftests.c \
425 unittests/rsp-low-selftests.c \
426 unittests/scoped_fd-selftests.c \
427 unittests/scoped_mmap-selftests.c \
428 unittests/scoped_restore-selftests.c \
429 unittests/string_view-selftests.c \
430 unittests/tracepoint-selftests.c \
431 unittests/unpack-selftests.c \
432 unittests/utils-selftests.c \
433 unittests/xml-utils-selftests.c
435 SUBDIR_UNITTESTS_OBS = $(patsubst %.c,%.o,$(SUBDIR_UNITTESTS_SRCS))
437 SUBDIR_TARGET_SRCS = target/waitstatus.c
438 SUBDIR_TARGET_OBS = $(patsubst %.c,%.o,$(SUBDIR_TARGET_SRCS))
441 # Opcodes currently live in one of two places. Either they are in the
442 # opcode library, typically ../opcodes, or they are in a header file
444 # Where is the "-lopcodes" library, with (some of) the opcode tables and
446 OPCODES_DIR = ../opcodes
447 OPCODES_SRC = $(srcdir)/$(OPCODES_DIR)
448 OPCODES = $(OPCODES_DIR)/libopcodes.a
449 # Where are the other opcode tables which only have header file
451 OP_INCLUDE = $(INCLUDE_DIR)/opcode
452 # Some source files like to use #include "opcodes/file.h"
453 OPCODES_CFLAGS = -I$(OP_INCLUDE) -I$(OPCODES_SRC)/..
455 # The simulator is usually nonexistent; targets that include one
456 # should set this to list all the .o or .a files to be linked in.
459 WIN32LIBS = @WIN32LIBS@
461 # Tcl et al cflags and libraries
463 TCL_CFLAGS = @TCL_INCLUDE@
464 GDBTKLIBS = @GDBTKLIBS@
465 # Extra flags that the GDBTK files need:
466 GDBTK_CFLAGS = @GDBTK_CFLAGS@
469 TK_CFLAGS = @TK_INCLUDE@
471 X11_CFLAGS = @TK_XINCLUDES@
475 WIN32LDAPP = @WIN32LDAPP@
478 GUI_CFLAGS_X = @GUI_CFLAGS_X@
479 IDE_CFLAGS = $(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
481 ALL_TCL_CFLAGS = $(TCL_CFLAGS) $(TK_CFLAGS)
483 # The version of gdbtk we're building. This should be kept
484 # in sync with GDBTK_VERSION and friends in gdbtk.h.
486 GDBTK_LIBRARY = $(datadir)/insight$(GDBTK_VERSION)
488 # Gdbtk requires an absolute path to the source directory or
489 # the testsuite won't run properly.
490 GDBTK_SRC_DIR = @GDBTK_SRC_DIR@
503 SUBDIR_GDBTK_SRCS = \
504 gdbtk/generic/gdbtk.c \
505 gdbtk/generic/gdbtk-bp.c \
506 gdbtk/generic/gdbtk-cmds.c \
507 gdbtk/generic/gdbtk-hooks.c \
508 gdbtk/generic/gdbtk-interp.c \
509 gdbtk/generic/gdbtk-main.c \
510 gdbtk/generic/gdbtk-register.c \
511 gdbtk/generic/gdbtk-stack.c \
512 gdbtk/generic/gdbtk-varobj.c \
513 gdbtk/generic/gdbtk-wrapper.c
515 SUBDIR_GDBTK_DEPS = $(LIBGUI) $(TCL_DEPS) $(TK_DEPS)
516 SUBDIR_GDBTK_LDFLAGS =
517 SUBDIR_GDBTK_CFLAGS = -DGDBTK
519 CONFIG_OBS = @CONFIG_OBS@
520 CONFIG_SRCS = @CONFIG_SRCS@
521 CONFIG_DEPS = @CONFIG_DEPS@
522 CONFIG_LDFLAGS = @CONFIG_LDFLAGS@
523 ENABLE_CFLAGS = @ENABLE_CFLAGS@
524 CONFIG_ALL = @CONFIG_ALL@
525 CONFIG_CLEAN = @CONFIG_CLEAN@
526 CONFIG_INSTALL = @CONFIG_INSTALL@
527 CONFIG_UNINSTALL = @CONFIG_UNINSTALL@
528 HAVE_NATIVE_GCORE_TARGET = @HAVE_NATIVE_GCORE_TARGET@
530 CONFIG_SRC_SUBDIR = arch cli mi common compile tui unittests guile python target
531 CONFIG_DEP_SUBDIR = $(addsuffix /$(DEPDIR),$(CONFIG_SRC_SUBDIR))
533 # -I. for config files.
534 # -I$(srcdir) for gdb internal headers.
535 # -I$(srcdir)/config for more generic config files.
537 # It is also possible that you will need to add -I/usr/include/sys if
538 # your system doesn't have fcntl.h in /usr/include (which is where it
539 # should be according to Posix).
541 GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/common -I$(srcdir)/config \
542 -DLOCALEDIR="\"$(localedir)\"" $(DEFS)
544 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
545 GLOBAL_CFLAGS = $(MH_CFLAGS)
547 PROFILE_CFLAGS = @PROFILE_CFLAGS@
549 # These are specifically reserved for setting from the command line
550 # when running make. I.E.: "make CFLAGS=-Wmissing-prototypes".
552 CXXFLAGS = @CXXFLAGS@
553 CPPFLAGS = @CPPFLAGS@
555 # Set by configure, for e.g. expat. Python installations are such that
556 # C headers are included using their basename (for example, we #include
557 # <Python.h> rather than, say, <python/Python.h>). Since the file names
558 # are sometimes a little generic, we think that the risk of collision
559 # with other header files is high. If that happens, we try to mitigate
560 # a bit the consequences by putting the Python includes last in the list.
561 INTERNAL_CPPFLAGS = $(CPPFLAGS) @GUILE_CPPFLAGS@ @PYTHON_CPPFLAGS@
563 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
564 INTERNAL_CFLAGS_BASE = \
565 $(CXXFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
566 $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) $(ZLIBINC) \
567 $(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \
568 $(INTL_CFLAGS) $(INCGNU) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS)
569 INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS)
570 INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS)
572 # LDFLAGS is specifically reserved for setting from the command line
576 # Profiling options need to go here to work.
577 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
578 # and have it work; that's why CFLAGS is here.
579 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
581 $(CXXFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) \
582 $(LDFLAGS) $(CONFIG_LDFLAGS)
584 # If your system is missing alloca(), or, more likely, it's there but
585 # it doesn't work, then refer to libiberty.
587 # Libraries and corresponding dependencies for compiling gdb.
588 # XM_CLIBS, defined in *config files, have host-dependent libs.
589 # LIBIBERTY appears twice on purpose.
590 CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(ZLIB) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
591 $(XM_CLIBS) $(GDBTKLIBS) \
592 @LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \
593 $(LIBEXPAT) $(LIBLZMA) $(LIBBABELTRACE) $(LIBIPT) \
594 $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU) $(LIBICONV) $(LIBMPFR)
595 CDEPS = $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
596 $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
603 # XML files to build in to GDB.
605 $(srcdir)/features/btrace.dtd \
606 $(srcdir)/features/btrace-conf.dtd \
607 $(srcdir)/features/gdb-target.dtd \
608 $(srcdir)/features/library-list.dtd \
609 $(srcdir)/features/library-list-aix.dtd \
610 $(srcdir)/features/library-list-svr4.dtd \
611 $(srcdir)/features/osdata.dtd \
612 $(srcdir)/features/threads.dtd \
613 $(srcdir)/features/traceframe-info.dtd \
614 $(srcdir)/features/xinclude.dtd
616 # Build the ser-*.o files the host supports. This includes ser-unix.o
617 # for any system that supports a POSIX interface to the serial port.
619 SER_HARDWIRE = @SER_HARDWIRE@
621 # This is remote-sim.o if a simulator is to be linked in.
624 # Target-dependent object files.
625 TARGET_OBS = @TARGET_OBS@
627 # All target-dependent objects files that require 64-bit CORE_ADDR
628 # (used with --enable-targets=all --enable-64-bit-bfd).
629 ALL_64_TARGET_OBS = \
630 aarch64-fbsd-tdep.o \
631 aarch64-linux-tdep.o \
632 aarch64-newlib-tdep.o \
636 alpha-mdebug-tdep.o \
640 amd64-darwin-tdep.o \
648 amd64-windows-tdep.o \
650 arch/aarch64-insn.o \
656 sparc64-fbsd-tdep.o \
657 sparc64-linux-tdep.o \
658 sparc64-nbsd-tdep.o \
659 sparc64-obsd-tdep.o \
660 sparc64-sol2-tdep.o \
663 # All other target-dependent objects files (used with --enable-targets=all).
667 arch/arm-get-next-pcs.o \
670 arch/ppc-linux-common.o \
725 microblaze-linux-tdep.o \
732 mn10300-linux-tdep.o \
747 ppc-ravenscar-thread.o \
755 rs6000-lynx178-tdep.o \
774 sparc-ravenscar-thread.o \
782 tilegx-linux-tdep.o \
792 xtensa-linux-tdep.o \
795 # The following native-target dependent variables are defined on
797 NAT_FILE = @NAT_FILE@
798 NATDEPFILES = @NATDEPFILES@
799 NAT_CDEPS = @NAT_CDEPS@
800 LOADLIBES = @LOADLIBES@
801 MH_CFLAGS = @MH_CFLAGS@
802 XM_CLIBS = @XM_CLIBS@
803 NAT_GENERATED_FILES = @NAT_GENERATED_FILES@
804 HAVE_NATIVE_GCORE_HOST = @HAVE_NATIVE_GCORE_HOST@
806 # Native-target dependent makefile fragment comes in here.
809 # End of native-target dependent variables.
813 "exec_prefix=$(exec_prefix)" \
814 "infodir=$(infodir)" \
815 "datarootdir=$(datarootdir)" \
817 "htmldir=$(htmldir)" \
821 "datadir=$(datadir)" \
822 "includedir=$(includedir)" \
823 "against=$(against)" \
824 "DESTDIR=$(DESTDIR)" \
826 "AR_FLAGS=$(AR_FLAGS)" \
830 "CXX_DIALECT=$(CXX_DIALECT)" \
831 "CXXFLAGS=$(CXXFLAGS)" \
832 "DLLTOOL=$(DLLTOOL)" \
833 "LDFLAGS=$(LDFLAGS)" \
835 "MAKEINFO=$(MAKEINFO)" \
836 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
837 "MAKEINFO_EXTRA_FLAGS=$(MAKEINFO_EXTRA_FLAGS)" \
838 "MAKEHTML=$(MAKEHTML)" \
839 "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
840 "INSTALL=$(INSTALL)" \
841 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
842 "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
843 "INSTALL_DATA=$(INSTALL_DATA)" \
844 "RUNTEST=$(RUNTEST)" \
845 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
847 # Flags that we pass when building the testsuite.
849 # empty for native, $(target_alias)/ for cross
850 target_subdir = @target_subdir@
853 if [ -f $${rootme}/../gcc/xgcc ] ; then \
854 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
855 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
857 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
860 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
863 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
868 if [ -f $${rootme}/../gcc/xg++ ] ; then \
869 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
870 echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
872 echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/; \
875 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
878 t='$(program_transform_name)'; echo g++ | sed -e '' $$t; \
882 # The use of $$(x_FOR_TARGET) reduces the command line length by not
883 # duplicating the lengthy definition.
884 TARGET_FLAGS_TO_PASS = \
886 "exec_prefix=$(exec_prefix)" \
887 "against=$(against)" \
888 'CC=$$(CC_FOR_TARGET)' \
889 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
891 'CXX=$$(CXX_FOR_TARGET)' \
892 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
893 "CXXFLAGS=$(CXXFLAGS)" \
894 "INSTALL=$(INSTALL)" \
895 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
896 "INSTALL_DATA=$(INSTALL_DATA)" \
897 "MAKEINFO=$(MAKEINFO)" \
898 "MAKEHTML=$(MAKEHTML)" \
899 "RUNTEST=$(RUNTEST)" \
900 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
901 "FORCE_PARALLEL=$(FORCE_PARALLEL)" \
904 # All source files that go into linking GDB.
906 # Files that should wind up in SFILES and whose corresponding .o
907 # should be in COMMON_OBS.
927 break-catch-syscall.c \
928 break-catch-throw.c \
943 common/btrace-common.c \
946 common/common-debug.c \
947 common/common-exceptions.c \
948 common/common-regcache.c \
949 common/common-utils.c \
955 common/job-control.c \
956 common/gdb_tilde_expand.c \
961 common/print-utils.c \
964 common/run-time-clock.c \
965 common/scoped_mmap.c \
967 common/signals-state-save-restore.c \
993 dwarf-index-cache.c \
994 dwarf-index-common.c \
995 dwarf-index-write.c \
997 dwarf2-frame-tailcall.c \
1011 filename-seen-cache.c \
1025 gdbarch-selftests.c \
1077 progspace-and-thread.c \
1108 target-descriptions.c \
1134 # Links made at configuration time should not be specified here, since
1135 # SFILES is used in building the distribution archive.
1159 $(SUBDIR_CLI_SRCS) \
1160 $(SUBDIR_TARGET_SRCS) \
1162 $(SUBDIR_GCC_COMPILE_SRCS)
1164 # Header files that need to have srcdir added. Note that in the cases
1165 # where we use a macro like $(gdbcmd_h), things are carefully arranged
1166 # so that each .h file is listed exactly once (M-x tags-search works
1167 # wrong if TAGS has files twice). Because this is tricky to get
1168 # right, it is probably easiest just to list .h files here directly.
1170 HFILES_NO_SRCDIR = \
1176 amd64-darwin-tdep.h \
1177 amd64-linux-tdep.h \
1219 dwarf-index-cache.h \
1220 dwarf-index-common.h \
1222 dwarf2-frame-tailcall.h \
1248 gdb_proc_service.h \
1265 hppa-linux-offsets.h \
1268 i386-darwin-tdep.h \
1273 ia64-libunwind-tdep.h \
1325 ppc-ravenscar-thread.h \
1332 progspace-and-thread.h \
1336 ravenscar-thread.h \
1371 sparc-ravenscar-thread.h \
1382 target-descriptions.h \
1412 arch/aarch64-insn.h \
1415 arch/ppc-linux-common.h \
1416 arch/ppc-linux-tdesc.h \
1424 common/common-debug.h \
1425 common/common-defs.h \
1426 common/common-exceptions.h \
1427 common/common-gdbthread.h \
1428 common/common-regcache.h \
1429 common/common-types.h \
1430 common/common-utils.h \
1431 common/job-control.h \
1436 common/gdb_assert.h \
1437 common/gdb_tilde_expand.h \
1438 common/gdb_locale.h \
1439 common/gdb_setjmp.h \
1440 common/gdb_signals.h \
1441 common/gdb_sys_time.h \
1444 common/common-inferior.h \
1446 common/host-defs.h \
1447 common/pathstuff.h \
1448 common/print-utils.h \
1452 common/run-time-clock.h \
1453 common/signals-state-save-restore.h \
1458 common/x86-xstate.h \
1459 common/xml-utils.h \
1461 compile/compile-c.h \
1462 compile/compile-cplus.h \
1463 compile/compile-internal.h \
1464 compile/compile-object-load.h \
1465 compile/compile-object-run.h \
1466 compile/gcc-c-plugin.h \
1467 compile/gcc-cp-plugin.h \
1470 config/djgpp/langinfo.h \
1471 config/djgpp/nl_types.h \
1472 config/i386/nm-fbsd.h \
1473 config/i386/nm-i386gnu.h \
1474 config/sparc/nm-sol2.h \
1475 gnulib/import/inttypes.in.h \
1476 gnulib/import/stddef.in.h \
1477 gnulib/import/stdint.in.h \
1478 gnulib/import/str-two-way.h \
1479 gnulib/import/string.in.h \
1480 gnulib/import/extra/snippet/arg-nonnull.h \
1481 gnulib/import/extra/snippet/c++defs.h \
1482 gnulib/import/extra/snippet/warn-on-use.h \
1490 nat/aarch64-linux.h \
1491 nat/aarch64-linux-hw-point.h \
1492 nat/aarch64-sve-linux-ptrace.h \
1493 nat/amd64-linux-siginfo.h \
1495 nat/gdb_thread_db.h \
1496 nat/fork-inferior.h \
1497 nat/linux-btrace.h \
1498 nat/linux-namespaces.h \
1500 nat/linux-osdata.h \
1501 nat/linux-personality.h \
1502 nat/linux-ptrace.h \
1503 nat/linux-waitpid.h \
1504 nat/mips-linux-watch.h \
1508 nat/x86-gcc-cpuid.h \
1510 nat/x86-linux-dregs.h \
1512 python/py-events.h \
1513 python/py-stopevent.h \
1515 python/python-internal.h \
1516 regformats/regdef.h \
1520 target/waitstatus.h \
1534 tui/tui-wingeneral.h \
1535 tui/tui-winsource.h \
1538 # Header files that already have srcdir in them, or which are in objdir.
1540 HFILES_WITH_SRCDIR = \
1544 # GDB "info" files, which should be included in their entirety
1545 INFOFILES = gdb.info*
1547 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
1548 # default their values the way we do for SER_HARDWIRE; in the future
1549 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
1550 # variables analogous to SER_HARDWIRE which get defaulted in this
1553 DEPFILES = $(TARGET_OBS) $(SER_HARDWIRE) $(NATDEPFILES) $(SIM_OBS)
1555 SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES) $(CONFIG_SRCS)
1556 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
1557 # and it's more useful to see it in the .y file.
1558 TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \
1560 TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
1562 COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
1566 $(patsubst %.c,%.o,$(COMMON_SFILES)) \
1568 $(SUBDIR_TARGET_OBS) \
1569 $(SUBDIR_GCC_COMPILE_OBS)
1571 SUBDIRS = doc @subdirs@ data-directory $(GNULIB_BUILDDIR)
1572 CLEANDIRS = $(SUBDIRS)
1574 # List of subdirectories in the build tree that must exist.
1575 # This is used to force build failures in existing trees when
1576 # a new directory is added.
1577 # The format here is for the `case' shell command.
1578 REQUIRED_SUBDIRS = doc | testsuite | $(GNULIB_BUILDDIR) | data-directory
1580 # Parser intermediate files.
1593 # ada-lex.c is included by another file, so it shouldn't wind up as a
1595 YYOBJ = $(filter-out ada-lex.o,$(patsubst %.c,%.o,$(YYFILES)))
1597 # Things which need to be built when making a distribution.
1599 DISTSTUFF = $(YYFILES)
1602 # All generated files which can be included by another file.
1609 $(NAT_GENERATED_FILES)
1611 # Flags needed to compile Python code
1612 PYTHON_CFLAGS = @PYTHON_CFLAGS@
1614 all: gdb$(EXEEXT) $(CONFIG_ALL) gdb-gdb.py gdb-gdb.gdb
1615 @$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
1617 # Rule for compiling .c files in the top-level gdb directory.
1618 # The order-only dependencies ensure that we create the build subdirectories.
1619 %.o: %.c | $(CONFIG_DEP_SUBDIR)
1623 $(CONFIG_DEP_SUBDIR):
1624 $(SHELL) $(srcdir)/../mkinstalldirs $@
1626 # Python files need special flags.
1627 python/%.o: INTERNAL_CFLAGS += $(PYTHON_CFLAGS)
1629 # Rules for compiling .c files in the various source subdirectories.
1630 %.o: $(srcdir)/gdbtk/generic/%.c
1631 $(COMPILE) $(all_gdbtk_cflags) $<
1634 %.o: ${srcdir}/nat/%.c
1640 # The check target can not use subdir_do, because subdir_do does not
1641 # use TARGET_FLAGS_TO_PASS.
1643 @if [ -f testsuite/Makefile ]; then \
1644 rootme=`pwd`; export rootme; \
1645 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1647 $(MAKE) $(TARGET_FLAGS_TO_PASS) check; \
1651 @if [ -f testsuite/Makefile ]; then \
1652 rootme=`pwd`; export rootme; \
1653 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1655 $(MAKE) $(TARGET_FLAGS_TO_PASS) check-perf; \
1659 @if [ -f testsuite/Makefile ]; then \
1660 rootme=`pwd`; export rootme; \
1661 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1663 $(MAKE) $(TARGET_FLAGS_TO_PASS) check-read1; \
1666 check-parallel: force
1667 @if [ -f testsuite/Makefile ]; then \
1668 rootme=`pwd`; export rootme; \
1669 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1671 $(MAKE) $(TARGET_FLAGS_TO_PASS) check-parallel; \
1674 # The idea is to parallelize testing of multilibs, for example:
1675 # make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
1676 # will run 3 concurrent sessions of check, eventually testing all 10
1677 # combinations. GNU make is required for the % pattern to work, as is
1678 # a shell that expands alternations within braces. If GNU make is not
1679 # used, this rule will harmlessly fail to match. Used FORCE_PARALLEL to
1680 # prevent serialized checking due to the passed RUNTESTFLAGS.
1681 # FIXME: use config.status --config not --version, when available.
1683 @if [ -f testsuite/config.status ]; then \
1684 rootme=`pwd`; export rootme; \
1685 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1686 target=`echo "$@" | sed 's,//.*,,'`; \
1687 variant=`echo "$@" | sed 's,^[^/]*//,,'`; \
1688 vardots=`echo "$$variant" | sed 's,/,.,g'`; \
1689 testdir=testsuite.$$vardots; \
1690 if [ ! -f $$testdir/Makefile ] && [ -f testsuite/config.status ]; then \
1691 configargs=`cd testsuite && ./config.status --version | \
1692 sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
1693 $(SHELL) $(srcdir)/../mkinstalldirs $$testdir && \
1695 eval $(SHELL) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
1696 "\"--srcdir=\$$rootsrc/testsuite\"" \
1698 else :; fi && cd $$testdir && \
1699 $(MAKE) $(TARGET_FLAGS_TO_PASS) \
1700 RUNTESTFLAGS="--target_board=$$variant $(RUNTESTFLAGS)" \
1701 FORCE_PARALLEL=$(if $(FORCE_PARALLEL),1,$(if $(RUNTESTFLAGS),,1)) \
1705 # The set of headers checked by 'check-headers' by default.
1706 CHECK_HEADERS = $(HFILES_NO_SRCDIR)
1708 # Try to compile each header in isolation, thus ensuring headers are
1711 # Defaults to checking all $HFILES_NO_SRCDIR headers.
1715 # make check-headers CHECK_HEADERS="header.h list.h"
1717 # to check specific headers.
1720 @echo Checking headers.
1721 for i in $(CHECK_HEADERS) ; do \
1722 $(CXX) $(CXX_DIALECT) -x c++-header -c -fsyntax-only \
1723 $(INTERNAL_CFLAGS) -include defs.h $(srcdir)/$$i ; \
1725 .PHONY: check-headers
1727 info install-info clean-info dvi pdf install-pdf html install-html: force
1728 @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
1730 # Traditionally "install" depends on "all". But it may be useful
1731 # not to; for example, if the user has made some trivial change to a
1732 # source file and doesn't care about rebuilding or just wants to save the
1733 # time it takes for make to check that all is up to date.
1734 # install-only is intended to address that need.
1736 @$(MAKE) $(FLAGS_TO_PASS) install-only
1738 install-only: $(CONFIG_INSTALL)
1739 transformed_name=`t='$(program_transform_name)'; \
1740 echo gdb | sed -e "$$t"` ; \
1741 if test "x$$transformed_name" = x; then \
1742 transformed_name=gdb ; \
1746 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
1747 $(INSTALL_PROGRAM) gdb$(EXEEXT) \
1748 $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1749 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(includedir)/gdb ; \
1750 $(INSTALL_DATA) jit-reader.h $(DESTDIR)$(includedir)/gdb/jit-reader.h
1751 if test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x; \
1753 transformed_name=`t='$(program_transform_name)'; \
1754 echo gcore | sed -e "$$t"` ; \
1755 if test "x$$transformed_name" = x; then \
1756 transformed_name=gcore ; \
1760 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
1761 $(INSTALL_SCRIPT) gcore \
1762 $(DESTDIR)$(bindir)/$$transformed_name; \
1764 transformed_name=`t='$(program_transform_name)'; \
1765 echo gdb-add-index | sed -e "$$t"` ; \
1766 if test "x$$transformed_name" = x; then \
1767 transformed_name=gdb-add-index ; \
1771 $(INSTALL_PROGRAM) $(srcdir)/contrib/gdb-add-index.sh \
1772 $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT)
1773 @$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
1776 $(MAKE) $(FLAGS_TO_PASS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1777 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1778 `test -z '$(STRIP)' || \
1779 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install-only
1782 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(GDB_DATADIR)/guile/gdb
1785 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(GDB_DATADIR)/python/gdb
1787 uninstall: force $(CONFIG_UNINSTALL)
1788 transformed_name=`t='$(program_transform_name)'; \
1789 echo gdb | sed -e $$t` ; \
1790 if test "x$$transformed_name" = x; then \
1791 transformed_name=gdb ; \
1795 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \
1796 $(DESTDIR)$(man1dir)/$$transformed_name.1
1797 if test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x; \
1799 transformed_name=`t='$(program_transform_name)'; \
1800 echo gcore | sed -e "$$t"` ; \
1801 if test "x$$transformed_name" = x; then \
1802 transformed_name=gcore ; \
1806 rm -f $(DESTDIR)$(bindir)/$$transformed_name; \
1808 @$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
1810 # The C++ name parser can be built standalone for testing.
1811 test-cp-name-parser.o: cp-name-parser.c
1812 $(COMPILE) -DTEST_CPNAMES cp-name-parser.c
1815 test-cp-name-parser$(EXEEXT): test-cp-name-parser.o $(LIBIBERTY)
1816 $(ECHO_CXXLD) $(CC_LD) $(INTERNAL_LDFLAGS) \
1817 -o test-cp-name-parser$(EXEEXT) test-cp-name-parser.o \
1820 # We do this by grepping through sources. If that turns out to be too slow,
1821 # maybe we could just require every .o file to have an initialization routine
1822 # of a given name (top.o -> _initialize_top, etc.).
1824 # Formatting conventions: The name of the _initialize_* routines must start
1825 # in column zero, and must not be inside #if.
1827 # Note that the set of files with init functions might change, or the names
1828 # of the functions might change, so this files needs to depend on all the
1829 # object files that will be linked into gdb.
1831 # FIXME: There is a problem with this approach - init.c may force
1832 # unnecessary files to be linked in.
1834 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
1835 # the first call is to _initialize_gdbtypes (implemented by explicitly
1836 # putting that function's name first in the init.l-tmp file). This is
1837 # a hack to ensure that all the architecture dependant global
1838 # builtin_type_* variables are initialized before anything else
1839 # (per-architecture code is called in the same order that it is
1840 # registered). The ``correct fix'' is to have all the builtin types
1841 # made part of the architecture and initialize them on-demand (using
1842 # gdbarch_data) just like everything else. The catch is that other
1843 # modules still take the address of these builtin types forcing them
1844 # to be variables, sigh!
1846 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1847 # anchored on the first column and excludes the ``/'' character so
1848 # that it doesn't add the $(srcdir) prefix to any file that already
1849 # has an absolute path. It turns out that $(DEC)'s True64 make
1850 # automatically adds the $(srcdir) prefixes when it encounters files
1851 # in sub-directories such as cli/ and mi/.
1853 INIT_FILES = $(COMMON_OBS)
1854 init.c: stamp-init; @true
1855 stamp-init: $(INIT_FILES)
1856 @$(ECHO_INIT_C) echo "Making init.c"
1857 @rm -f init.c-tmp init.l-tmp
1859 @echo gdbtypes > init.l-tmp
1860 @-LANG=C ; export LANG ; \
1861 LC_ALL=C ; export LC_ALL ; \
1862 echo $(INIT_FILES) | \
1865 -e '/^gdbtypes.[co]$$/d' \
1866 -e '/^init.[co]$$/d' \
1867 -e '/version.[co]$$/d' \
1868 -e '/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1869 -e 's/-exp\.o$$/-exp.y/' \
1871 -e 's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
1873 sed -n -e 's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev/null; \
1875 @echo '/* Do not modify this file. */' >>init.c-tmp
1876 @echo '/* It is created automatically by the Makefile. */'>>init.c-tmp
1877 @echo '#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp
1878 @echo 'extern void initialize_all_files(void);' >>init.c-tmp
1879 @sed -e 's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp >>init.c-tmp
1880 @echo 'void' >>init.c-tmp
1881 @echo 'initialize_all_files (void)' >>init.c-tmp
1882 @echo '{' >>init.c-tmp
1883 @sed -e 's/\(.*\)/ _initialize_\1 ();/' <init.l-tmp >>init.c-tmp
1884 @echo '}' >>init.c-tmp
1885 @$(SHELL) $(srcdir)/../move-if-change init.c-tmp init.c
1886 @echo stamp > stamp-init
1890 # Create a library of the gdb object files and build GDB by linking
1893 # init.o is very important. It pulls in the rest of GDB.
1894 LIBGDB_OBS = $(COMMON_OBS) init.o
1895 libgdb.a: $(LIBGDB_OBS)
1897 $(AR) q libgdb.a $(LIBGDB_OBS)
1900 # Removing the old gdb first works better if it is running, at least on SunOS.
1901 gdb$(EXEEXT): gdb.o $(LIBGDB_OBS) $(CDEPS) $(TDEPLIBS)
1902 $(SILENCE) rm -f gdb$(EXEEXT)
1903 $(ECHO_CXXLD) $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1904 -o gdb$(EXEEXT) gdb.o $(LIBGDB_OBS) \
1905 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1906 ifneq ($(CODESIGN_CERT),)
1907 $(ECHO_SIGN) $(CODESIGN) -s $(CODESIGN_CERT) gdb$(EXEEXT)
1910 # Convenience rule to handle recursion.
1911 $(LIBGNU) $(GNULIB_H): all-lib
1912 all-lib: $(GNULIB_BUILDDIR)/Makefile
1913 @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=$(GNULIB_BUILDDIR) subdir_do
1916 # Convenience rule to handle recursion.
1917 .PHONY: all-data-directory
1918 all-data-directory: data-directory/Makefile
1919 @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=data-directory subdir_do
1921 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1922 # on itself without copying the executable. So "make gdb1" will make
1923 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1924 # Removing gdb1 before the copy is the right thing if gdb1 is open
1925 # in another process.
1926 gdb1$(EXEEXT): gdb$(EXEEXT)
1928 cp gdb$(EXEEXT) gdb1$(EXEEXT)
1930 # Put the proper machine-specific files first, so M-. on a machine
1931 # specific routine gets the one for the correct machine. (FIXME: those
1932 # files go in twice; we should be removing them from the main list).
1934 # TAGS depends on all the files that go into it so you can rebuild TAGS
1935 # with `make TAGS' and not have to say `rm TAGS' first.
1937 GDB_NM_FILE = @GDB_NM_FILE@
1938 TAGS: $(TAGFILES_NO_SRCDIR) $(TAGFILES_WITH_SRCDIR)
1940 etags `(test -n "$(GDB_NM_FILE)" && echo "$(srcdir)/$(GDB_NM_FILE)")` \
1941 `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1942 echo $(srcdir)/$$i ; \
1943 done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1945 done) | sed -e 's/\.o$$/\.c/'` \
1946 `find $(srcdir)/config -name '*.h' -print`
1950 clean mostlyclean: $(CONFIG_CLEAN)
1951 @$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(CLEANDIRS)" subdir_do
1952 rm -f *.o *.a *~ init.c-tmp init.l-tmp version.c-tmp
1953 rm -f init.c stamp-init version.c stamp-version
1954 rm -f gdb$(EXEEXT) core make.log
1955 rm -f gdb[0-9]$(EXEEXT)
1956 rm -f test-cp-name-parser$(EXEEXT)
1957 rm -f xml-builtin.c stamp-xml
1959 for i in $(CONFIG_SRC_SUBDIR); do \
1961 rm -f $$i/$(DEPDIR)/*; \
1964 # This used to depend on c-exp.c m2-exp.c TAGS
1965 # I believe this is wrong; the makefile standards for distclean just
1966 # describe removing files; the only sort of "re-create a distribution"
1967 # functionality described is if the distributed files are unmodified.
1968 # NB: While GDBSERVER might be configured on native systems, it isn't
1969 # always included in SUBDIRS. Remove the gdbserver files explicitly.
1971 @$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1972 rm -rf $(GNULIB_BUILDDIR)
1973 rm -f gdbserver/config.status gdbserver/config.log
1974 rm -f gdbserver/tm.h gdbserver/xm.h gdbserver/nm.h
1975 rm -f gdbserver/Makefile gdbserver/config.cache
1976 rm -f nm.h config.status config.h stamp-h b jit-reader.h
1977 rm -f gdb-gdb.py gdb-gdb.gdb
1978 rm -f y.output yacc.acts yacc.tmp y.tab.h
1979 rm -f config.log config.cache
1982 for i in $(CONFIG_SRC_SUBDIR); do \
1983 if test -d $$i/$(DEPDIR); then rmdir $$i/$(DEPDIR); fi \
1986 maintainer-clean: local-maintainer-clean do-maintainer-clean distclean
1987 realclean: maintainer-clean
1989 local-maintainer-clean:
1990 @echo "This command is intended for maintainers to use;"
1991 @echo "it deletes files that may require special tools to rebuild."
1994 ada-lex.c ada-exp.c \
1995 d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c rust-exp.c
1996 rm -f TAGS $(INFOFILES)
1998 rm -f nm.h config.status
2000 do-maintainer-clean:
2001 @$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(CLEANDIRS)" \
2004 diststuff: $(DISTSTUFF) $(PACKAGE).pot $(CATALOGS)
2005 cd doc; $(MAKE) $(MFLAGS) diststuff
2008 @for i in $(DODIRS); do \
2010 $(REQUIRED_SUBDIRS)) \
2011 if [ ! -f ./$$i/Makefile ] ; then \
2012 echo "Missing $$i/Makefile" >&2 ; \
2016 if [ -f ./$$i/Makefile ] ; then \
2018 $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
2019 else exit 1 ; fi ; \
2023 Makefile: Makefile.in config.status
2024 # Regenerate the Makefile and the tm.h / nm.h links.
2025 CONFIG_FILES="Makefile" \
2028 $(SHELL) config.status
2030 $(GNULIB_BUILDDIR)/Makefile: gnulib/Makefile.in config.status
2031 @cd $(GNULIB_BUILDDIR); CONFIG_FILES="Makefile" \
2032 CONFIG_COMMANDS="depfiles" \
2035 $(SHELL) config.status
2037 data-directory/Makefile: data-directory/Makefile.in config.status
2038 CONFIG_FILES="data-directory/Makefile" \
2039 CONFIG_COMMANDS="depfiles" \
2042 $(SHELL) config.status
2046 ./gdb$(EXEEXT) --data-directory=`pwd`/data-directory $(GDBFLAGS)
2048 jit-reader.h: $(srcdir)/jit-reader.in
2049 $(SHELL) config.status $@
2051 gcore: $(srcdir)/gcore.in
2052 $(SHELL) config.status $@
2054 gdb-gdb.py: $(srcdir)/gdb-gdb.py.in
2055 $(SHELL) config.status $@
2057 gdb-gdb.gdb: $(srcdir)/gdb-gdb.gdb.in
2058 $(SHELL) config.status $@
2060 config.h: stamp-h ; @true
2061 stamp-h: $(srcdir)/config.in config.status
2062 CONFIG_HEADERS=config.h:config.in \
2063 CONFIG_COMMANDS="default depdir" \
2066 $(SHELL) config.status
2068 config.status: $(srcdir)/configure configure.nat configure.tgt configure.host ../bfd/development.sh
2069 $(SHELL) config.status --recheck
2072 ACLOCAL_AMFLAGS = -I ../config
2074 # Keep these in sync with the includes in acinclude.m4.
2077 acx_configure_dir.m4 \
2081 ../config/acinclude.m4 \
2082 ../config/plugins.m4 \
2083 ../config/lead-dot.m4 \
2084 ../config/override.m4 \
2085 ../config/largefile.m4 \
2086 ../config/gettext-sister.m4 \
2087 ../config/lib-ld.m4 \
2088 ../config/lib-prefix.m4 \
2089 ../config/lib-link.m4 \
2092 ../config/depstand.m4 \
2093 ../config/lcmessage.m4 \
2094 ../config/codeset.m4 \
2097 $(srcdir)/aclocal.m4: @MAINTAINER_MODE_TRUE@ $(aclocal_m4_deps)
2098 cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
2101 configure_deps = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
2102 $(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(configure_deps)
2103 cd $(srcdir) && $(AUTOCONF)
2105 AUTOHEADER = autoheader
2106 $(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(configure_deps)
2107 cd $(srcdir) && $(AUTOHEADER)
2111 # automatic rebuilding in automake-generated Makefiles requires
2112 # this rule in the toplevel Makefile, which, with GNU make, causes
2113 # the desired updates through the implicit regeneration of the Makefile
2114 # and all of its prerequisites.
2121 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
2123 cd doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS)
2125 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
2127 cd doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS)
2129 # GDB MANUAL: TeX dvi file
2131 cd doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS)
2133 # GDB MANUAL: info file
2135 cd doc; $(MAKE) gdb.info $(FLAGS_TO_PASS)
2137 # Make copying.c from COPYING
2138 $(srcdir)/copying.c: @MAINTAINER_MODE_TRUE@ $(srcdir)/../COPYING3 $(srcdir)/copying.awk
2139 awk -f $(srcdir)/copying.awk \
2140 < $(srcdir)/../COPYING3 > $(srcdir)/copying.tmp
2141 mv $(srcdir)/copying.tmp $(srcdir)/copying.c
2143 version.c: stamp-version; @true
2144 # Note that the obvious names for the temp file are taken by
2145 # create-version.sh.
2146 stamp-version: Makefile version.in $(srcdir)/../bfd/version.h $(srcdir)/common/create-version.sh
2147 $(ECHO_GEN) $(SHELL) $(srcdir)/common/create-version.sh $(srcdir) \
2148 $(host_alias) $(target_alias) version-t.t
2149 @$(SHELL) $(srcdir)/../move-if-change version-t.t version.c
2150 @echo stamp > stamp-version
2153 gdb.cxref: $(SFILES)
2154 cxref -I. $(SFILES) >gdb.cxref
2158 # GNU Make has an annoying habit of putting *all* the Makefile variables
2159 # into the environment, unless you include this target as a circumvention.
2160 # Rumor is that this will be fixed (and this target can be removed)
2164 # GNU Make 3.63 has a different problem: it keeps tacking command line
2165 # overrides onto the definition of $(MAKE). This variable setting
2170 aarch64-fbsd-nat.c \
2171 aarch64-fbsd-tdep.c \
2172 aarch64-linux-nat.c \
2173 aarch64-linux-tdep.c \
2174 aarch64-newlib-tdep.c \
2180 alpha-linux-tdep.c \
2181 alpha-mdebug-tdep.c \
2186 amd64-darwin-tdep.c \
2187 amd64-dicos-tdep.c \
2191 amd64-linux-tdep.c \
2204 arm-get-next-pcs.c \
2211 arm-symbian-tdep.c \
2239 i386-cygwin-tdep.c \
2241 i386-darwin-tdep.c \
2258 ia64-libunwind-tdep.c \
2277 microblaze-linux-tdep.c \
2289 mips64-obsd-tdep.c \
2294 nios2-linux-tdep.c \
2307 ppc-ravenscar-thread.c \
2311 ravenscar-thread.c \
2314 riscv-linux-tdep.c \
2317 rs6000-lynx178-tdep.c \
2337 sparc-linux-tdep.c \
2342 sparc-ravenscar-thread.c \
2346 sparc64-fbsd-nat.c \
2347 sparc64-fbsd-tdep.c \
2348 sparc64-linux-nat.c \
2349 sparc64-linux-tdep.c \
2351 sparc64-nbsd-nat.c \
2352 sparc64-nbsd-tdep.c \
2353 sparc64-obsd-nat.c \
2354 sparc64-obsd-tdep.c \
2355 sparc64-sol2-tdep.c \
2360 tilegx-linux-nat.c \
2361 tilegx-linux-tdep.c \
2374 xtensa-linux-nat.c \
2375 xtensa-linux-tdep.c \
2378 common/mingw-strerror.c \
2379 common/posix-strerror.c
2381 # Some files need explicit build rules (due to -Werror problems) or due
2382 # to sub-directory fun 'n' games.
2384 # ada-exp.c can appear in srcdir, for releases; or in ., for
2385 # development builds.
2386 ADA_EXP_C = `if test -f ada-exp.c; then echo ada-exp.c; else echo $(srcdir)/ada-exp.c; fi`
2388 # Some versions of flex give output that triggers
2389 # -Wold-style-definition.
2390 ada-exp.o: ada-exp.c
2391 $(ECHO_CXX) $(COMPILE.pre) $(INTERNAL_CFLAGS) \
2392 $(GDB_WARN_CFLAGS_NO_DEFS) $(COMPILE.post) $(ADA_EXP_C)
2395 # Message files. Based on code in gcc/Makefile.in.
2397 # Rules for generating translated message descriptions. Disabled by
2398 # autoconf if the tools are not available.
2400 .PHONY: all-po install-po uninstall-po clean-po update-po $(PACKAGE).pot
2404 # This notation should be acceptable to all Make implementations used
2405 # by people who are interested in updating .po files.
2406 update-po: $(CATALOGS:.gmo=.pox)
2408 # N.B. We do not attempt to copy these into $(srcdir). The snapshot
2411 -test -d po || mkdir po
2412 $(GMSGFMT) --statistics -o $@ $<
2414 # The new .po has to be gone over by hand, so we deposit it into
2415 # build/po with a different extension. If build/po/$(PACKAGE).pot
2416 # exists, use it (it was just created), else use the one in srcdir.
2418 -test -d po || mkdir po
2419 $(MSGMERGE) $< `if test -f po/$(PACKAGE).pot; \
2420 then echo po/$(PACKAGE).pot; \
2421 else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o $@
2423 # This rule has to look for .gmo modules in both srcdir and the cwd,
2424 # and has to check that we actually have a catalog for each language,
2425 # in case they weren't built or included with the distribution.
2427 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(datadir)
2428 cats="$(CATALOGS)"; for cat in $$cats; do \
2429 lang=`basename $$cat | sed 's/\.gmo$$//'`; \
2430 if [ -f $$cat ]; then :; \
2431 elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
2434 dir=$(localedir)/$$lang/LC_MESSAGES; \
2435 echo $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir; \
2436 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir || exit 1; \
2437 echo $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
2438 $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
2441 cats="$(CATALOGS)"; for cat in $$cats; do \
2442 lang=`basename $$cat | sed 's/\.gmo$$//'`; \
2443 if [ -f $$cat ]; then :; \
2444 elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
2447 dir=$(localedir)/$$lang/LC_MESSAGES; \
2448 rm -f $(DESTDIR)$$dir/$(PACKAGE).mo; \
2450 # Delete po/*.gmo only if we are not building in the source directory.
2452 -if [ ! -f Makefile.in ]; then rm -f po/*.gmo; fi
2454 # Rule for regenerating the message template (gdb.pot). Instead of
2455 # forcing everyone to edit POTFILES.in, which proved impractical, this
2456 # rule has no dependencies and always regenerates gdb.pot. This is
2457 # relatively harmless since the .po files do not directly depend on
2458 # it. The .pot file is left in the build directory. Since GDB's
2459 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
2460 # files) force this rule.
2461 $(PACKAGE).pot: po/$(PACKAGE).pot
2462 po/$(PACKAGE).pot: force
2463 -test -d po || mkdir po
2464 sh -e $(srcdir)/po/gdbtext $(XGETTEXT) $(PACKAGE) . $(srcdir)
2468 # YACC/LEX dependencies
2470 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
2471 # exist in srcdir, then compiled in objdir to LANG-exp.o. If we
2472 # said LANG-exp.c rather than ./c-exp.c some makes would
2473 # sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
2474 # decls for malloc/realloc/free which conflict with everything else.
2475 # Strictly speaking c-exp.c should therefore depend on
2476 # Makefile.in, but that was a pretty big annoyance.
2479 $(ECHO_YACC) $(SHELL) $(YLWRAP) $< y.tab.c $@.tmp -- \
2480 $(YACC) $(YFLAGS) || (rm -f $@.tmp; false)
2481 @sed -e '/extern.*malloc/d' \
2482 -e '/extern.*realloc/d' \
2483 -e '/extern.*free/d' \
2484 -e '/include.*malloc.h/d' \
2485 -e 's/\([^x]\)malloc/\1xmalloc/g' \
2486 -e 's/\([^x]\)realloc/\1xrealloc/g' \
2487 -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
2488 -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
2489 -e '/^#line.*y.tab.c/d' \
2490 -e 's/YY_NULL/YY_NULLPTR/g' \
2491 < $@.tmp > $@.new && \
2495 $(ECHO_LEX) $(FLEX) -t $< \
2496 | sed -e '/extern.*malloc/d' \
2497 -e '/extern.*realloc/d' \
2498 -e '/extern.*free/d' \
2499 -e '/include.*malloc.h/d' \
2500 -e 's/\([^x]\)malloc/\1xmalloc/g' \
2501 -e 's/\([^x]\)realloc/\1xrealloc/g' \
2502 -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
2503 -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
2504 -e 's/yy_flex_xrealloc/yyxrealloc/g' \
2508 .PRECIOUS: ada-lex.c
2512 xml-builtin.c: stamp-xml; @true
2513 stamp-xml: $(srcdir)/features/feature_to_c.sh Makefile $(XMLFILES)
2514 $(SILENCE) rm -f xml-builtin.tmp
2515 $(ECHO_GEN_XML_BUILTIN) AWK="$(AWK)" \
2516 $(SHELL) $(srcdir)/features/feature_to_c.sh \
2517 xml-builtin.tmp $(XMLFILES)
2518 $(SILENCE) $(SHELL) $(srcdir)/../move-if-change xml-builtin.tmp xml-builtin.c
2519 $(SILENCE) echo stamp > stamp-xml
2521 .PRECIOUS: xml-builtin.c
2524 # GDBTK sub-directory
2527 all-gdbtk: insight$(EXEEXT)
2530 transformed_name=`t='$(program_transform_name)'; \
2531 echo insight | sed -e $$t` ; \
2532 if test "x$$transformed_name" = x; then \
2533 transformed_name=insight ; \
2537 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir); \
2538 $(INSTALL_PROGRAM) insight$(EXEEXT) \
2539 $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
2540 $(SHELL) $(srcdir)/../mkinstalldirs \
2541 $(DESTDIR)$(GDBTK_LIBRARY) ; \
2542 $(SHELL) $(srcdir)/../mkinstalldirs \
2543 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION) ; \
2544 $(INSTALL_DATA) $(srcdir)/gdbtk/plugins/plugins.tcl \
2545 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION)/plugins.tcl ; \
2546 $(SHELL) $(srcdir)/../mkinstalldirs \
2547 $(DESTDIR)$(GDBTK_LIBRARY)/images \
2548 $(DESTDIR)$(GDBTK_LIBRARY)/images2 ; \
2549 $(SHELL) $(srcdir)/../mkinstalldirs \
2550 $(DESTDIR)$(GDBTK_LIBRARY)/help \
2551 $(DESTDIR)$(GDBTK_LIBRARY)/help/images \
2552 $(DESTDIR)$(GDBTK_LIBRARY)/help/trace ; \
2553 cd $(srcdir)/gdbtk/library ; \
2554 for i in *.tcl *.itcl *.ith *.itb images/*.gif images2/*.gif images/icons.txt images2/icons.txt tclIndex help/*.html help/trace/*.html help/trace/index.toc help/images/*.gif help/images/*.png; \
2556 $(INSTALL_DATA) $$i $(DESTDIR)$(GDBTK_LIBRARY)/$$i ; \
2560 transformed_name=`t='$(program_transform_name)'; \
2561 echo insight | sed -e $$t` ; \
2562 if test "x$$transformed_name" = x; then \
2563 transformed_name=insight ; \
2567 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
2568 rm -rf $(DESTDIR)$(GDBTK_LIBRARY)
2571 rm -f insight$(EXEEXT)
2573 # Removing the old gdb first works better if it is running, at least on SunOS.
2574 insight$(EXEEXT): gdbtk-main.o libgdb.a $(CDEPS) $(TDEPLIBS)
2575 rm -f insight$(EXEEXT)
2576 $(ECHO_CXXLD) $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
2577 -o insight$(EXEEXT) gdbtk-main.o libgdb.a \
2578 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
2580 gdbres.o: $(srcdir)/gdbtk/gdb.rc $(srcdir)/gdbtk/gdbtool.ico
2581 $(WINDRES) --include $(srcdir)/gdbtk $(srcdir)/gdbtk/gdb.rc gdbres.o
2583 all_gdbtk_cflags = $(IDE_CFLAGS) $(ITCL_CFLAGS) \
2584 $(ITK_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
2586 -DGDBTK_LIBRARY=\"$(GDBTK_LIBRARY)\" \
2587 -DSRC_DIR=\"$(GDBTK_SRC_DIR)\"
2590 # Dependency tracking.
2593 ifeq ($(DEPMODE),depmode=gcc3)
2594 # Note that we put the dependencies into a .Tpo file, then move them
2595 # into place if the compile succeeds. We need this because gcc does
2596 # not atomically write the dependency output file.
2597 override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
2598 -MF $(@D)/$(DEPDIR)/$(basename $(@F)).Tpo
2599 override POSTCOMPILE = @mv $(@D)/$(DEPDIR)/$(basename $(@F)).Tpo \
2600 $(@D)/$(DEPDIR)/$(basename $(@F)).Po
2602 override COMPILE.pre = source='$<' object='$@' libtool=no \
2603 DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) \
2604 $(CXX) -x c++ $(CXX_DIALECT)
2605 # depcomp handles atomicity for us, so we don't need a postcompile
2607 override POSTCOMPILE =
2610 # A list of all the objects we might care about in this build, for
2611 # dependency tracking.
2612 all_object_files = gdb.o $(LIBGDB_OBS) gdbtk-main.o \
2613 test-cp-name-parser.o
2615 # All the .deps files to include.
2616 all_deps_files = $(foreach dep,$(patsubst %.o,%.Po,$(all_object_files)),\
2617 $(dir $(dep))/$(DEPDIR)/$(notdir $(dep)))
2619 # Ensure that generated files are created early. Use order-only
2620 # dependencies if available. They require GNU make 3.80 or newer,
2621 # and the .VARIABLES variable was introduced at the same time.
2623 $(all_object_files): | $(generated_files)
2625 $(all_object_files) : $(generated_files)
2629 -include $(all_deps_files)
2631 # Disable implicit make rules.
2632 include $(srcdir)/disable-implicit-rules.mk
2634 ### end of the gdb Makefile.in.