1 # Copyright (C) 1989-2018 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 3 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see <http://www.gnu.org/licenses/>.
18 # Please keep lists in this file sorted alphabetically, with one item per line.
19 # Here are the general guidelines for ordering files and directories:
21 # - Files come before directories.
22 # - The extensions are not taken into account when comparing filenames, except
23 # if the filenames are otherwise equal.
24 # - A filename that is a prefix of another one comes before.
25 # - Underscores and dashes are treated equally, and come before alphanumeric
38 exec_prefix = @exec_prefix@
40 host_alias = @host_alias@
41 target_alias = @target_alias@
42 program_transform_name = @program_transform_name@
45 tooldir = $(libdir)/$(target_alias)
48 localedir = @localedir@
50 man1dir = $(mandir)/man1
51 man2dir = $(mandir)/man2
52 man3dir = $(mandir)/man3
53 man4dir = $(mandir)/man4
54 man5dir = $(mandir)/man5
55 man6dir = $(mandir)/man6
56 man7dir = $(mandir)/man7
57 man8dir = $(mandir)/man8
58 man9dir = $(mandir)/man9
60 datarootdir = @datarootdir@
64 includedir = @includedir@
66 install_sh = @install_sh@
68 # This can be referenced by `LIBINTL' as computed by
69 # ZW_GNU_GETTEXT_SISTER_DIR.
79 INSTALL_PROGRAM = @INSTALL_PROGRAM@
80 INSTALL_SCRIPT = @INSTALL_SCRIPT@
81 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
82 INSTALL_DATA = @INSTALL_DATA@
101 # If you are compiling with GCC, make sure that either 1) You have the
102 # fixed include files where GCC can reach them, or 2) You use the
103 # -traditional flag. Otherwise the ioctl calls in inflow.c
104 # will be incorrectly compiled. The "fixincludes" script in the gcc
105 # distribution will fix your include files up.
108 CXX_DIALECT = @CXX_DIALECT@
110 # Dependency tracking information.
111 DEPMODE = @CCDEPMODE@
113 depcomp = $(SHELL) $(srcdir)/../depcomp
115 # Directory containing source files.
118 top_srcdir = @top_srcdir@
120 include $(srcdir)/silent-rules.mk
122 # Note that these are overridden by GNU make-specific code below if
123 # GNU make is used. The overrides implement dependency tracking.
124 COMPILE.pre = $(CXX) -x c++ $(CXX_DIALECT)
125 COMPILE.post = -c -o $@
126 COMPILE = $(ECHO_CXX) $(COMPILE.pre) $(INTERNAL_CFLAGS) $(COMPILE.post)
131 # This is used to rebuild ada-lex.c from ada-lex.l. If the program is
132 # not defined, but ada-lex.c is present, compilation will continue,
133 # possibly with a warning.
136 YLWRAP = $(srcdir)/../ylwrap
138 # where to find makeinfo, preferably one designed for texinfo-2
139 MAKEINFO = @MAKEINFO@
140 MAKEINFOFLAGS = @MAKEINFOFLAGS@
141 MAKEINFO_EXTRA_FLAGS = @MAKEINFO_EXTRA_FLAGS@
142 MAKEINFO_CMD = $(MAKEINFO) $(MAKEINFOFLAGS) $(MAKEINFO_EXTRA_FLAGS)
144 MAKEHTML = $(MAKEINFO_CMD) --html
147 # Set this up with gcc if you have gnu ld and the loader will print out
148 # line numbers for undefined references.
150 CC_LD = $(CXX) $(CXX_DIALECT)
152 # Where is our "include" directory? Typically $(srcdir)/../include.
153 # This is essentially the header file directory for the library
154 # routines in libiberty.
155 INCLUDE_DIR = $(srcdir)/../include
156 INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
158 # Where is the "-liberty" library? Typically in ../libiberty.
159 LIBIBERTY = ../libiberty/libiberty.a
161 # Where is the BFD library? Typically in ../bfd.
163 BFD = $(BFD_DIR)/libbfd.a
164 BFD_SRC = $(srcdir)/$(BFD_DIR)
165 BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
167 # This is where we get zlib from. zlibdir is -L../zlib and zlibinc is
168 # -I../zlib, unless we were configured with --with-system-zlib, in which
169 # case both are empty.
173 # Where is the decnumber library? Typically in ../libdecnumber.
174 LIBDECNUMBER_DIR = ../libdecnumber
175 LIBDECNUMBER = $(LIBDECNUMBER_DIR)/libdecnumber.a
176 LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)
177 LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)
179 # Where is the READLINE library? Typically in ../readline.
180 READLINE_DIR = ../readline
181 READLINE_SRC = $(srcdir)/$(READLINE_DIR)
182 READLINE = @READLINE@
183 READLINE_DEPS = @READLINE_DEPS@
184 READLINE_CFLAGS = @READLINE_CFLAGS@
186 # Where is expat? This will be empty if expat was not available.
187 LIBEXPAT = @LIBEXPAT@
189 # Where is lzma? This will be empty if lzma was not available.
192 # Where is libbabeltrace? This will be empty if lbabeltrace was not
194 LIBBABELTRACE = @LIBBABELTRACE@
196 # Where is libipt? This will be empty if libipt was not available.
199 # Where is libmpfr? This will be empty if libmpfr was not available.
202 WARN_CFLAGS = @WARN_CFLAGS@
203 WERROR_CFLAGS = @WERROR_CFLAGS@
204 GDB_WARN_CFLAGS = $(WARN_CFLAGS)
205 GDB_WERROR_CFLAGS = $(WERROR_CFLAGS)
207 GDB_WARN_CFLAGS_NO_FORMAT = `echo " $(GDB_WARN_CFLAGS) " \
208 | sed "s/ -Wformat-nonliteral / -Wno-format-nonliteral /g"`
209 GDB_WARN_CFLAGS_NO_DEFS = `echo " $(GDB_WARN_CFLAGS) " \
210 | sed "s/ -Wold-style-definition / -Wno-old-style-definition /g"`
212 RDYNAMIC = @RDYNAMIC@
214 # Where is the INTL library? Typically in ../intl.
216 INTL_DEPS = @LIBINTL_DEP@
217 INTL_CFLAGS = @INCINTL@
219 # Where is the ICONV library? This will be empty if in libc or not available.
220 LIBICONV = @LIBICONV@
222 # Did the user give us a --with-gdb-datadir option?
223 GDB_DATADIR = @GDB_DATADIR@
227 CODESIGN_CERT = @CODESIGN_CERT@
229 # Flags to pass to gdb when invoked with "make run".
232 # Helper code from gnulib.
233 GNULIB_BUILDDIR = build-gnulib
234 LIBGNU = $(GNULIB_BUILDDIR)/import/libgnu.a
235 INCGNU = -I$(srcdir)/gnulib/import -I$(GNULIB_BUILDDIR)/import
237 # Generated headers in the gnulib directory. These must be listed
238 # so that they are generated before other files are compiled.
239 GNULIB_H = $(GNULIB_BUILDDIR)/import/string.h @GNULIB_STDINT_H@
242 # CLI sub directory definitons
254 SUBDIR_CLI_OBS = $(patsubst %.c,%.o,$(SUBDIR_CLI_SRCS))
261 # MI sub directory definitons
282 SUBDIR_MI_OBS = $(patsubst %.c,%.o,$(SUBDIR_MI_SRCS))
289 # TUI sub directory definitions
307 tui/tui-wingeneral.c \
310 SUBDIR_TUI_OBS = $(patsubst %.c,%.o,$(SUBDIR_TUI_SRCS))
314 SUBDIR_TUI_CFLAGS = -DTUI=1
317 # GCC Compile support sub-directory definitions
319 SUBDIR_GCC_COMPILE_SRCS = \
321 compile/compile-c-support.c \
322 compile/compile-c-symbols.c \
323 compile/compile-c-types.c \
324 compile/compile-loc2c.c \
325 compile/compile-object-load.c \
326 compile/compile-object-load.h \
327 compile/compile-object-run.c \
328 compile/compile-object-run.h
330 SUBDIR_GCC_COMPILE_OBS = $(patsubst %.c,%.o,$(filter %.c,$(SUBDIR_GCC_COMPILE_SRCS)))
333 # Guile sub directory definitons for guile support.
335 SUBDIR_GUILE_SRCS = \
338 guile/scm-auto-load.c \
340 guile/scm-breakpoint.c \
343 guile/scm-exception.c \
346 guile/scm-iterator.c \
347 guile/scm-lazy-string.c \
349 guile/scm-objfile.c \
352 guile/scm-pretty-print.c \
353 guile/scm-progspace.c \
354 guile/scm-safe-call.c \
362 SUBDIR_GUILE_OBS = $(patsubst %.c,%.o,$(SUBDIR_GUILE_SRCS))
365 SUBDIR_GUILE_LDFLAGS =
366 SUBDIR_GUILE_CFLAGS =
369 # python sub directory definitons
371 SUBDIR_PYTHON_SRCS = \
373 python/py-auto-load.c \
375 python/py-bpevent.c \
376 python/py-breakpoint.c \
378 python/py-continueevent.c \
380 python/py-evtregistry.c \
382 python/py-exitedevent.c \
383 python/py-finishbreakpoint.c \
385 python/py-framefilter.c \
386 python/py-function.c \
387 python/py-gdb-readline.c \
388 python/py-inferior.c \
389 python/py-infevents.c \
390 python/py-infthread.c \
391 python/py-instruction.c \
392 python/py-lazy-string.c \
393 python/py-linetable.c \
394 python/py-newobjfileevent.c \
395 python/py-objfile.c \
397 python/py-prettyprint.c \
398 python/py-progspace.c \
400 python/py-record-btrace.c \
401 python/py-record-full.c \
402 python/py-signalevent.c \
403 python/py-stopevent.c \
406 python/py-threadevent.c \
412 python/py-xmethods.c \
415 SUBDIR_PYTHON_OBS = $(patsubst %.c,%.o,$(SUBDIR_PYTHON_SRCS))
418 SUBDIR_PYTHON_LDFLAGS =
419 SUBDIR_PYTHON_CFLAGS =
421 SUBDIR_UNITTESTS_SRCS = \
422 unittests/array-view-selftests.c \
423 unittests/common-utils-selftests.c \
424 unittests/environ-selftests.c \
425 unittests/format_pieces-selftests.c \
426 unittests/function-view-selftests.c \
427 unittests/lookup_name_info-selftests.c \
428 unittests/memory-map-selftests.c \
429 unittests/memrange-selftests.c \
430 unittests/offset-type-selftests.c \
431 unittests/observable-selftests.c \
432 unittests/optional-selftests.c \
433 unittests/ptid-selftests.c \
434 unittests/rsp-low-selftests.c \
435 unittests/scoped_fd-selftests.c \
436 unittests/scoped_mmap-selftests.c \
437 unittests/scoped_restore-selftests.c \
438 unittests/string_view-selftests.c \
439 unittests/tracepoint-selftests.c \
440 unittests/unpack-selftests.c \
441 unittests/utils-selftests.c \
442 unittests/xml-utils-selftests.c
444 SUBDIR_UNITTESTS_OBS = $(patsubst %.c,%.o,$(SUBDIR_UNITTESTS_SRCS))
446 SUBDIR_TARGET_SRCS = target/waitstatus.c
447 SUBDIR_TARGET_OBS = $(patsubst %.c,%.o,$(SUBDIR_TARGET_SRCS))
450 # Opcodes currently live in one of two places. Either they are in the
451 # opcode library, typically ../opcodes, or they are in a header file
453 # Where is the "-lopcodes" library, with (some of) the opcode tables and
455 OPCODES_DIR = ../opcodes
456 OPCODES_SRC = $(srcdir)/$(OPCODES_DIR)
457 OPCODES = $(OPCODES_DIR)/libopcodes.a
458 # Where are the other opcode tables which only have header file
460 OP_INCLUDE = $(INCLUDE_DIR)/opcode
461 # Some source files like to use #include "opcodes/file.h"
462 OPCODES_CFLAGS = -I$(OP_INCLUDE) -I$(OPCODES_SRC)/..
464 # The simulator is usually nonexistent; targets that include one
465 # should set this to list all the .o or .a files to be linked in.
468 WIN32LIBS = @WIN32LIBS@
470 # Tcl et al cflags and libraries
472 TCL_CFLAGS = @TCL_INCLUDE@
473 GDBTKLIBS = @GDBTKLIBS@
474 # Extra flags that the GDBTK files need:
475 GDBTK_CFLAGS = @GDBTK_CFLAGS@
478 TK_CFLAGS = @TK_INCLUDE@
480 X11_CFLAGS = @TK_XINCLUDES@
484 WIN32LDAPP = @WIN32LDAPP@
487 GUI_CFLAGS_X = @GUI_CFLAGS_X@
488 IDE_CFLAGS = $(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
490 ALL_TCL_CFLAGS = $(TCL_CFLAGS) $(TK_CFLAGS)
492 # The version of gdbtk we're building. This should be kept
493 # in sync with GDBTK_VERSION and friends in gdbtk.h.
495 GDBTK_LIBRARY = $(datadir)/insight$(GDBTK_VERSION)
497 # Gdbtk requires an absolute path to the source directory or
498 # the testsuite won't run properly.
499 GDBTK_SRC_DIR = @GDBTK_SRC_DIR@
512 SUBDIR_GDBTK_SRCS = \
513 gdbtk/generic/gdbtk.c \
514 gdbtk/generic/gdbtk-bp.c \
515 gdbtk/generic/gdbtk-cmds.c \
516 gdbtk/generic/gdbtk-hooks.c \
517 gdbtk/generic/gdbtk-interp.c \
518 gdbtk/generic/gdbtk-main.c \
519 gdbtk/generic/gdbtk-register.c \
520 gdbtk/generic/gdbtk-stack.c \
521 gdbtk/generic/gdbtk-varobj.c \
522 gdbtk/generic/gdbtk-wrapper.c
524 SUBDIR_GDBTK_DEPS = $(LIBGUI) $(TCL_DEPS) $(TK_DEPS)
525 SUBDIR_GDBTK_LDFLAGS =
526 SUBDIR_GDBTK_CFLAGS = -DGDBTK
528 CONFIG_OBS = @CONFIG_OBS@
529 CONFIG_SRCS = @CONFIG_SRCS@
530 CONFIG_DEPS = @CONFIG_DEPS@
531 CONFIG_LDFLAGS = @CONFIG_LDFLAGS@
532 ENABLE_CFLAGS = @ENABLE_CFLAGS@
533 CONFIG_ALL = @CONFIG_ALL@
534 CONFIG_CLEAN = @CONFIG_CLEAN@
535 CONFIG_INSTALL = @CONFIG_INSTALL@
536 CONFIG_UNINSTALL = @CONFIG_UNINSTALL@
537 HAVE_NATIVE_GCORE_TARGET = @HAVE_NATIVE_GCORE_TARGET@
539 CONFIG_SRC_SUBDIR = arch cli mi common compile tui unittests guile python target
540 CONFIG_DEP_SUBDIR = $(addsuffix /$(DEPDIR),$(CONFIG_SRC_SUBDIR))
542 # -I. for config files.
543 # -I$(srcdir) for gdb internal headers.
544 # -I$(srcdir)/config for more generic config files.
546 # It is also possible that you will need to add -I/usr/include/sys if
547 # your system doesn't have fcntl.h in /usr/include (which is where it
548 # should be according to Posix).
550 GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/common -I$(srcdir)/config \
551 -DLOCALEDIR="\"$(localedir)\"" $(DEFS)
553 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
554 GLOBAL_CFLAGS = $(MH_CFLAGS)
556 PROFILE_CFLAGS = @PROFILE_CFLAGS@
558 # These are specifically reserved for setting from the command line
559 # when running make. I.E.: "make CFLAGS=-Wmissing-prototypes".
561 CXXFLAGS = @CXXFLAGS@
563 # Set by configure, for e.g. expat. Python installations are such that
564 # C headers are included using their basename (for example, we #include
565 # <Python.h> rather than, say, <python/Python.h>). Since the file names
566 # are sometimes a little generic, we think that the risk of collision
567 # with other header files is high. If that happens, we try to mitigate
568 # a bit the consequences by putting the Python includes last in the list.
569 INTERNAL_CPPFLAGS = @CPPFLAGS@ @GUILE_CPPFLAGS@ @PYTHON_CPPFLAGS@
571 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
572 INTERNAL_CFLAGS_BASE = \
573 $(CXXFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
574 $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) $(ZLIBINC) \
575 $(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \
576 $(INTL_CFLAGS) $(INCGNU) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS)
577 INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS)
578 INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS)
580 # LDFLAGS is specifically reserved for setting from the command line
584 # Profiling options need to go here to work.
585 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
586 # and have it work; that's why CFLAGS is here.
587 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
589 $(CXXFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) \
590 $(LDFLAGS) $(CONFIG_LDFLAGS)
592 # If your system is missing alloca(), or, more likely, it's there but
593 # it doesn't work, then refer to libiberty.
595 # Libraries and corresponding dependencies for compiling gdb.
596 # XM_CLIBS, defined in *config files, have host-dependent libs.
597 # LIBIBERTY appears twice on purpose.
598 CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(ZLIB) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
599 $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) \
600 @LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \
601 $(LIBEXPAT) $(LIBLZMA) $(LIBBABELTRACE) $(LIBIPT) \
602 $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU) $(LIBICONV) $(LIBMPFR)
603 CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
604 $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
611 # XML files to build in to GDB.
613 $(srcdir)/features/btrace.dtd \
614 $(srcdir)/features/btrace-conf.dtd \
615 $(srcdir)/features/gdb-target.dtd \
616 $(srcdir)/features/library-list.dtd \
617 $(srcdir)/features/library-list-aix.dtd \
618 $(srcdir)/features/library-list-svr4.dtd \
619 $(srcdir)/features/osdata.dtd \
620 $(srcdir)/features/threads.dtd \
621 $(srcdir)/features/traceframe-info.dtd \
622 $(srcdir)/features/xinclude.dtd
624 # Build the ser-*.o files the host supports. This includes ser-unix.o
625 # for any system that supports a POSIX interface to the serial port.
627 SER_HARDWIRE = @SER_HARDWIRE@
629 # This is remote-sim.o if a simulator is to be linked in.
632 # Target-dependent object files.
633 TARGET_OBS = @TARGET_OBS@
635 # All target-dependent objects files that require 64-bit CORE_ADDR
636 # (used with --enable-targets=all --enable-64-bit-bfd).
637 ALL_64_TARGET_OBS = \
638 aarch64-fbsd-tdep.o \
639 aarch64-linux-tdep.o \
640 aarch64-newlib-tdep.o \
644 alpha-mdebug-tdep.o \
648 amd64-darwin-tdep.o \
656 amd64-windows-tdep.o \
658 arch/aarch64-insn.o \
664 sparc64-fbsd-tdep.o \
665 sparc64-linux-tdep.o \
666 sparc64-nbsd-tdep.o \
667 sparc64-obsd-tdep.o \
668 sparc64-sol2-tdep.o \
671 # All other target-dependent objects files (used with --enable-targets=all).
675 arch/arm-get-next-pcs.o \
678 arch/ppc-linux-common.o \
731 microblaze-linux-tdep.o \
738 mn10300-linux-tdep.o \
753 ppc-ravenscar-thread.o \
760 rs6000-lynx178-tdep.o \
779 sparc-ravenscar-thread.o \
787 tilegx-linux-tdep.o \
797 xtensa-linux-tdep.o \
800 # The following native-target dependent variables are defined on
802 NAT_FILE = @NAT_FILE@
803 NATDEPFILES = @NATDEPFILES@
804 NAT_CDEPS = @NAT_CDEPS@
805 LOADLIBES = @LOADLIBES@
806 MH_CFLAGS = @MH_CFLAGS@
807 XM_CLIBS = @XM_CLIBS@
808 NAT_GENERATED_FILES = @NAT_GENERATED_FILES@
809 HAVE_NATIVE_GCORE_HOST = @HAVE_NATIVE_GCORE_HOST@
811 # Native-target dependent makefile fragment comes in here.
814 # End of native-target dependent variables.
818 "exec_prefix=$(exec_prefix)" \
819 "infodir=$(infodir)" \
820 "datarootdir=$(datarootdir)" \
822 "htmldir=$(htmldir)" \
826 "datadir=$(datadir)" \
827 "includedir=$(includedir)" \
828 "against=$(against)" \
829 "DESTDIR=$(DESTDIR)" \
831 "AR_FLAGS=$(AR_FLAGS)" \
835 "CXX_DIALECT=$(CXX_DIALECT)" \
836 "CXXFLAGS=$(CXXFLAGS)" \
837 "DLLTOOL=$(DLLTOOL)" \
838 "LDFLAGS=$(LDFLAGS)" \
840 "MAKEINFO=$(MAKEINFO)" \
841 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
842 "MAKEINFO_EXTRA_FLAGS=$(MAKEINFO_EXTRA_FLAGS)" \
843 "MAKEHTML=$(MAKEHTML)" \
844 "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
845 "INSTALL=$(INSTALL)" \
846 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
847 "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
848 "INSTALL_DATA=$(INSTALL_DATA)" \
849 "RUNTEST=$(RUNTEST)" \
850 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
852 # Flags that we pass when building the testsuite.
854 # empty for native, $(target_alias)/ for cross
855 target_subdir = @target_subdir@
858 if [ -f $${rootme}/../gcc/xgcc ] ; then \
859 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
860 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
862 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
865 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
868 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
873 if [ -f $${rootme}/../gcc/xg++ ] ; then \
874 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
875 echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
877 echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/; \
880 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
883 t='$(program_transform_name)'; echo g++ | sed -e '' $$t; \
887 # The use of $$(x_FOR_TARGET) reduces the command line length by not
888 # duplicating the lengthy definition.
889 TARGET_FLAGS_TO_PASS = \
891 "exec_prefix=$(exec_prefix)" \
892 "against=$(against)" \
893 'CC=$$(CC_FOR_TARGET)' \
894 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
896 'CXX=$$(CXX_FOR_TARGET)' \
897 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
898 "CXXFLAGS=$(CXXFLAGS)" \
899 "INSTALL=$(INSTALL)" \
900 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
901 "INSTALL_DATA=$(INSTALL_DATA)" \
902 "MAKEINFO=$(MAKEINFO)" \
903 "MAKEHTML=$(MAKEHTML)" \
904 "RUNTEST=$(RUNTEST)" \
905 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
906 "FORCE_PARALLEL=$(FORCE_PARALLEL)" \
909 # All source files that go into linking GDB.
911 # Files that should wind up in SFILES and whose corresponding .o
912 # should be in COMMON_OBS.
932 break-catch-syscall.c \
933 break-catch-throw.c \
947 common/btrace-common.c \
950 common/common-debug.c \
951 common/common-exceptions.c \
952 common/common-regcache.c \
953 common/common-utils.c \
959 common/job-control.c \
960 common/gdb_tilde_expand.c \
964 common/print-utils.c \
967 common/run-time-clock.c \
969 common/signals-state-save-restore.c \
995 dwarf-index-common.c \
996 dwarf-index-write.c \
998 dwarf2-frame-tailcall.c \
1012 filename-seen-cache.c \
1026 gdbarch-selftests.c \
1078 progspace-and-thread.c \
1109 target-descriptions.c \
1135 # Links made at configuration time should not be specified here, since
1136 # SFILES is used in building the distribution archive.
1160 $(SUBDIR_TARGET_SRCS) \
1162 $(SUBDIR_GCC_COMPILE_SRCS)
1164 # Header files that need to have srcdir added. Note that in the cases
1165 # where we use a macro like $(gdbcmd_h), things are carefully arranged
1166 # so that each .h file is listed exactly once (M-x tags-search works
1167 # wrong if TAGS has files twice). Because this is tricky to get
1168 # right, it is probably easiest just to list .h files here directly.
1170 HFILES_NO_SRCDIR = \
1176 amd64-darwin-tdep.h \
1177 amd64-linux-tdep.h \
1217 dwarf-index-common.h \
1219 dwarf2-frame-tailcall.h \
1245 gdb_proc_service.h \
1262 hppa-linux-offsets.h \
1265 i386-darwin-tdep.h \
1270 ia64-libunwind-tdep.h \
1322 ppc-ravenscar-thread.h \
1329 progspace-and-thread.h \
1333 ravenscar-thread.h \
1368 sparc-ravenscar-thread.h \
1379 target-descriptions.h \
1409 arch/aarch64-insn.h \
1412 arch/ppc-linux-common.h \
1413 arch/ppc-linux-tdesc.h \
1421 common/common-debug.h \
1422 common/common-defs.h \
1423 common/common-exceptions.h \
1424 common/common-gdbthread.h \
1425 common/common-regcache.h \
1426 common/common-types.h \
1427 common/common-utils.h \
1428 common/job-control.h \
1433 common/gdb_assert.h \
1434 common/gdb_tilde_expand.h \
1435 common/gdb_locale.h \
1436 common/gdb_setjmp.h \
1437 common/gdb_signals.h \
1438 common/gdb_sys_time.h \
1441 common/common-inferior.h \
1442 common/host-defs.h \
1443 common/pathstuff.h \
1444 common/print-utils.h \
1448 common/run-time-clock.h \
1449 common/signals-state-save-restore.h \
1454 common/x86-xstate.h \
1455 common/xml-utils.h \
1459 config/djgpp/langinfo.h \
1460 config/djgpp/nl_types.h \
1461 config/i386/nm-fbsd.h \
1462 config/i386/nm-i386gnu.h \
1463 config/sparc/nm-sol2.h \
1464 gnulib/import/inttypes.in.h \
1465 gnulib/import/stddef.in.h \
1466 gnulib/import/stdint.in.h \
1467 gnulib/import/str-two-way.h \
1468 gnulib/import/string.in.h \
1469 gnulib/import/extra/snippet/arg-nonnull.h \
1470 gnulib/import/extra/snippet/c++defs.h \
1471 gnulib/import/extra/snippet/warn-on-use.h \
1479 nat/aarch64-linux.h \
1480 nat/aarch64-linux-hw-point.h \
1481 nat/aarch64-sve-linux-ptrace.h \
1482 nat/amd64-linux-siginfo.h \
1484 nat/gdb_thread_db.h \
1485 nat/fork-inferior.h \
1486 nat/linux-btrace.h \
1487 nat/linux-namespaces.h \
1489 nat/linux-osdata.h \
1490 nat/linux-personality.h \
1491 nat/linux-ptrace.h \
1492 nat/linux-waitpid.h \
1493 nat/mips-linux-watch.h \
1497 nat/x86-gcc-cpuid.h \
1499 nat/x86-linux-dregs.h \
1501 python/py-events.h \
1502 python/py-stopevent.h \
1504 python/python-internal.h \
1505 regformats/regdef.h \
1509 target/waitstatus.h \
1523 tui/tui-wingeneral.h \
1524 tui/tui-winsource.h \
1527 # Header files that already have srcdir in them, or which are in objdir.
1529 HFILES_WITH_SRCDIR = \
1533 # GDB "info" files, which should be included in their entirety
1534 INFOFILES = gdb.info*
1536 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
1537 # default their values the way we do for SER_HARDWIRE; in the future
1538 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
1539 # variables analogous to SER_HARDWIRE which get defaulted in this
1542 DEPFILES = $(TARGET_OBS) $(SER_HARDWIRE) $(NATDEPFILES) $(SIM_OBS)
1544 SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES) $(CONFIG_SRCS)
1545 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
1546 # and it's more useful to see it in the .y file.
1547 TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \
1549 TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
1551 COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
1555 $(patsubst %.c,%.o,$(COMMON_SFILES)) \
1556 $(SUBDIR_TARGET_OBS) \
1557 $(SUBDIR_GCC_COMPILE_OBS)
1559 SUBDIRS = doc @subdirs@ data-directory $(GNULIB_BUILDDIR)
1560 CLEANDIRS = $(SUBDIRS)
1562 # List of subdirectories in the build tree that must exist.
1563 # This is used to force build failures in existing trees when
1564 # a new directory is added.
1565 # The format here is for the `case' shell command.
1566 REQUIRED_SUBDIRS = doc | testsuite | $(GNULIB_BUILDDIR) | data-directory
1568 # Parser intermediate files.
1581 # ada-lex.c is included by another file, so it shouldn't wind up as a
1583 YYOBJ = $(filter-out ada-lex.o,$(patsubst %.c,%.o,$(YYFILES)))
1585 # Things which need to be built when making a distribution.
1587 DISTSTUFF = $(YYFILES)
1590 # All generated files which can be included by another file.
1597 $(NAT_GENERATED_FILES)
1599 # Flags needed to compile Python code
1600 PYTHON_CFLAGS = @PYTHON_CFLAGS@
1602 all: gdb$(EXEEXT) $(CONFIG_ALL) gdb-gdb.py gdb-gdb.gdb
1603 @$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
1605 # Rule for compiling .c files in the top-level gdb directory.
1606 # The order-only dependencies ensure that we create the build subdirectories.
1607 %.o: %.c | $(CONFIG_DEP_SUBDIR)
1611 $(CONFIG_DEP_SUBDIR):
1612 $(SHELL) $(srcdir)/../mkinstalldirs $@
1614 # Python files need special flags.
1615 python/%.o: INTERNAL_CFLAGS += $(PYTHON_CFLAGS)
1617 # Rules for compiling .c files in the various source subdirectories.
1618 %.o: $(srcdir)/gdbtk/generic/%.c
1619 $(COMPILE) $(all_gdbtk_cflags) $<
1622 %.o: ${srcdir}/nat/%.c
1628 # The check target can not use subdir_do, because subdir_do does not
1629 # use TARGET_FLAGS_TO_PASS.
1631 @if [ -f testsuite/Makefile ]; then \
1632 rootme=`pwd`; export rootme; \
1633 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1635 $(MAKE) $(TARGET_FLAGS_TO_PASS) check; \
1639 @if [ -f testsuite/Makefile ]; then \
1640 rootme=`pwd`; export rootme; \
1641 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1643 $(MAKE) $(TARGET_FLAGS_TO_PASS) check-perf; \
1647 @if [ -f testsuite/Makefile ]; then \
1648 rootme=`pwd`; export rootme; \
1649 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1651 $(MAKE) $(TARGET_FLAGS_TO_PASS) check-read1; \
1654 check-parallel: force
1655 @if [ -f testsuite/Makefile ]; then \
1656 rootme=`pwd`; export rootme; \
1657 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1659 $(MAKE) $(TARGET_FLAGS_TO_PASS) check-parallel; \
1662 # The idea is to parallelize testing of multilibs, for example:
1663 # make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
1664 # will run 3 concurrent sessions of check, eventually testing all 10
1665 # combinations. GNU make is required for the % pattern to work, as is
1666 # a shell that expands alternations within braces. If GNU make is not
1667 # used, this rule will harmlessly fail to match. Used FORCE_PARALLEL to
1668 # prevent serialized checking due to the passed RUNTESTFLAGS.
1669 # FIXME: use config.status --config not --version, when available.
1671 @if [ -f testsuite/config.status ]; then \
1672 rootme=`pwd`; export rootme; \
1673 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1674 target=`echo "$@" | sed 's,//.*,,'`; \
1675 variant=`echo "$@" | sed 's,^[^/]*//,,'`; \
1676 vardots=`echo "$$variant" | sed 's,/,.,g'`; \
1677 testdir=testsuite.$$vardots; \
1678 if [ ! -f $$testdir/Makefile ] && [ -f testsuite/config.status ]; then \
1679 configargs=`cd testsuite && ./config.status --version | \
1680 sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
1681 $(SHELL) $(srcdir)/../mkinstalldirs $$testdir && \
1683 eval $(SHELL) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
1684 "\"--srcdir=\$$rootsrc/testsuite\"" \
1686 else :; fi && cd $$testdir && \
1687 $(MAKE) $(TARGET_FLAGS_TO_PASS) \
1688 RUNTESTFLAGS="--target_board=$$variant $(RUNTESTFLAGS)" \
1689 FORCE_PARALLEL=$(if $(FORCE_PARALLEL),1,$(if $(RUNTESTFLAGS),,1)) \
1693 # The set of headers checked by 'check-headers' by default.
1694 CHECK_HEADERS = $(HFILES_NO_SRCDIR)
1696 # Try to compile each header in isolation, thus ensuring headers are
1699 # Defaults to checking all $HFILES_NO_SRCDIR headers.
1703 # make check-headers CHECK_HEADERS="header.h list.h"
1705 # to check specific headers.
1708 @echo Checking headers.
1709 for i in $(CHECK_HEADERS) ; do \
1710 $(CXX) $(CXX_DIALECT) -x c++-header -c -fsyntax-only \
1711 $(INTERNAL_CFLAGS) -include defs.h $(srcdir)/$$i ; \
1713 .PHONY: check-headers
1715 info install-info clean-info dvi pdf install-pdf html install-html: force
1716 @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
1718 # Traditionally "install" depends on "all". But it may be useful
1719 # not to; for example, if the user has made some trivial change to a
1720 # source file and doesn't care about rebuilding or just wants to save the
1721 # time it takes for make to check that all is up to date.
1722 # install-only is intended to address that need.
1724 @$(MAKE) $(FLAGS_TO_PASS) install-only
1726 install-only: $(CONFIG_INSTALL)
1727 transformed_name=`t='$(program_transform_name)'; \
1728 echo gdb | sed -e "$$t"` ; \
1729 if test "x$$transformed_name" = x; then \
1730 transformed_name=gdb ; \
1734 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
1735 $(INSTALL_PROGRAM) gdb$(EXEEXT) \
1736 $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1737 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(includedir)/gdb ; \
1738 $(INSTALL_DATA) jit-reader.h $(DESTDIR)$(includedir)/gdb/jit-reader.h
1739 if test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x; \
1741 transformed_name=`t='$(program_transform_name)'; \
1742 echo gcore | sed -e "$$t"` ; \
1743 if test "x$$transformed_name" = x; then \
1744 transformed_name=gcore ; \
1748 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
1749 $(INSTALL_SCRIPT) gcore \
1750 $(DESTDIR)$(bindir)/$$transformed_name; \
1752 transformed_name=`t='$(program_transform_name)'; \
1753 echo gdb-add-index | sed -e "$$t"` ; \
1754 if test "x$$transformed_name" = x; then \
1755 transformed_name=gdb-add-index ; \
1759 $(INSTALL_PROGRAM) $(srcdir)/contrib/gdb-add-index.sh \
1760 $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT)
1761 @$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
1764 $(MAKE) $(FLAGS_TO_PASS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1765 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1766 `test -z '$(STRIP)' || \
1767 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install-only
1770 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(GDB_DATADIR)/guile/gdb
1773 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(GDB_DATADIR)/python/gdb
1775 uninstall: force $(CONFIG_UNINSTALL)
1776 transformed_name=`t='$(program_transform_name)'; \
1777 echo gdb | sed -e $$t` ; \
1778 if test "x$$transformed_name" = x; then \
1779 transformed_name=gdb ; \
1783 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \
1784 $(DESTDIR)$(man1dir)/$$transformed_name.1
1785 if test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x; \
1787 transformed_name=`t='$(program_transform_name)'; \
1788 echo gcore | sed -e "$$t"` ; \
1789 if test "x$$transformed_name" = x; then \
1790 transformed_name=gcore ; \
1794 rm -f $(DESTDIR)$(bindir)/$$transformed_name; \
1796 @$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
1798 # The C++ name parser can be built standalone for testing.
1799 test-cp-name-parser.o: cp-name-parser.c
1800 $(COMPILE) -DTEST_CPNAMES cp-name-parser.c
1803 test-cp-name-parser$(EXEEXT): test-cp-name-parser.o $(LIBIBERTY)
1804 $(ECHO_CXXLD) $(CC_LD) $(INTERNAL_LDFLAGS) \
1805 -o test-cp-name-parser$(EXEEXT) test-cp-name-parser.o \
1808 # We do this by grepping through sources. If that turns out to be too slow,
1809 # maybe we could just require every .o file to have an initialization routine
1810 # of a given name (top.o -> _initialize_top, etc.).
1812 # Formatting conventions: The name of the _initialize_* routines must start
1813 # in column zero, and must not be inside #if.
1815 # Note that the set of files with init functions might change, or the names
1816 # of the functions might change, so this files needs to depend on all the
1817 # object files that will be linked into gdb.
1819 # FIXME: There is a problem with this approach - init.c may force
1820 # unnecessary files to be linked in.
1822 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
1823 # the first call is to _initialize_gdbtypes (implemented by explicitly
1824 # putting that function's name first in the init.l-tmp file). This is
1825 # a hack to ensure that all the architecture dependant global
1826 # builtin_type_* variables are initialized before anything else
1827 # (per-architecture code is called in the same order that it is
1828 # registered). The ``correct fix'' is to have all the builtin types
1829 # made part of the architecture and initialize them on-demand (using
1830 # gdbarch_data) just like everything else. The catch is that other
1831 # modules still take the address of these builtin types forcing them
1832 # to be variables, sigh!
1834 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1835 # anchored on the first column and excludes the ``/'' character so
1836 # that it doesn't add the $(srcdir) prefix to any file that already
1837 # has an absolute path. It turns out that $(DEC)'s True64 make
1838 # automatically adds the $(srcdir) prefixes when it encounters files
1839 # in sub-directories such as cli/ and mi/.
1841 INIT_FILES = $(COMMON_OBS)
1842 init.c: stamp-init; @true
1843 stamp-init: $(INIT_FILES)
1844 @$(ECHO_INIT_C) echo "Making init.c"
1845 @rm -f init.c-tmp init.l-tmp
1847 @echo gdbtypes > init.l-tmp
1848 @-LANG=C ; export LANG ; \
1849 LC_ALL=C ; export LC_ALL ; \
1850 echo $(INIT_FILES) | \
1853 -e '/^gdbtypes.[co]$$/d' \
1854 -e '/^init.[co]$$/d' \
1855 -e '/version.[co]$$/d' \
1856 -e '/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1857 -e 's/-exp\.o$$/-exp.y/' \
1859 -e 's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
1861 sed -n -e 's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev/null; \
1863 @echo '/* Do not modify this file. */' >>init.c-tmp
1864 @echo '/* It is created automatically by the Makefile. */'>>init.c-tmp
1865 @echo '#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp
1866 @echo 'extern void initialize_all_files(void);' >>init.c-tmp
1867 @sed -e 's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp >>init.c-tmp
1868 @echo 'void' >>init.c-tmp
1869 @echo 'initialize_all_files (void)' >>init.c-tmp
1870 @echo '{' >>init.c-tmp
1871 @sed -e 's/\(.*\)/ _initialize_\1 ();/' <init.l-tmp >>init.c-tmp
1872 @echo '}' >>init.c-tmp
1873 @$(SHELL) $(srcdir)/../move-if-change init.c-tmp init.c
1874 @echo stamp > stamp-init
1878 # Create a library of the gdb object files and build GDB by linking
1881 # init.o is very important. It pulls in the rest of GDB.
1882 LIBGDB_OBS = $(COMMON_OBS) init.o
1883 libgdb.a: $(LIBGDB_OBS)
1885 $(AR) q libgdb.a $(LIBGDB_OBS)
1888 # Removing the old gdb first works better if it is running, at least on SunOS.
1889 gdb$(EXEEXT): gdb.o $(LIBGDB_OBS) $(CDEPS) $(TDEPLIBS)
1890 $(SILENCE) rm -f gdb$(EXEEXT)
1891 $(ECHO_CXXLD) $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1892 -o gdb$(EXEEXT) gdb.o $(LIBGDB_OBS) \
1893 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1894 ifneq ($(CODESIGN_CERT),)
1895 $(ECHO_SIGN) $(CODESIGN) -s $(CODESIGN_CERT) gdb$(EXEEXT)
1898 # Convenience rule to handle recursion.
1899 $(LIBGNU) $(GNULIB_H): all-lib
1900 all-lib: $(GNULIB_BUILDDIR)/Makefile
1901 @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=$(GNULIB_BUILDDIR) subdir_do
1904 # Convenience rule to handle recursion.
1905 .PHONY: all-data-directory
1906 all-data-directory: data-directory/Makefile
1907 @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=data-directory subdir_do
1909 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1910 # on itself without copying the executable. So "make gdb1" will make
1911 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1912 # Removing gdb1 before the copy is the right thing if gdb1 is open
1913 # in another process.
1914 gdb1$(EXEEXT): gdb$(EXEEXT)
1916 cp gdb$(EXEEXT) gdb1$(EXEEXT)
1918 # Put the proper machine-specific files first, so M-. on a machine
1919 # specific routine gets the one for the correct machine. (FIXME: those
1920 # files go in twice; we should be removing them from the main list).
1922 # TAGS depends on all the files that go into it so you can rebuild TAGS
1923 # with `make TAGS' and not have to say `rm TAGS' first.
1925 GDB_NM_FILE = @GDB_NM_FILE@
1926 TAGS: $(TAGFILES_NO_SRCDIR) $(TAGFILES_WITH_SRCDIR)
1928 etags `(test -n "$(GDB_NM_FILE)" && echo "$(srcdir)/$(GDB_NM_FILE)")` \
1929 `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1930 echo $(srcdir)/$$i ; \
1931 done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1933 done) | sed -e 's/\.o$$/\.c/'` \
1934 `find $(srcdir)/config -name '*.h' -print`
1938 clean mostlyclean: $(CONFIG_CLEAN)
1939 @$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(CLEANDIRS)" subdir_do
1940 rm -f *.o *.a *~ init.c-tmp init.l-tmp version.c-tmp
1941 rm -f init.c stamp-init version.c stamp-version
1942 rm -f gdb$(EXEEXT) core make.log
1943 rm -f gdb[0-9]$(EXEEXT)
1944 rm -f test-cp-name-parser$(EXEEXT)
1945 rm -f xml-builtin.c stamp-xml
1947 for i in $(CONFIG_SRC_SUBDIR); do \
1949 rm -f $$i/$(DEPDIR)/*; \
1952 # This used to depend on c-exp.c m2-exp.c TAGS
1953 # I believe this is wrong; the makefile standards for distclean just
1954 # describe removing files; the only sort of "re-create a distribution"
1955 # functionality described is if the distributed files are unmodified.
1956 # NB: While GDBSERVER might be configured on native systems, it isn't
1957 # always included in SUBDIRS. Remove the gdbserver files explicitly.
1959 @$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1960 rm -rf $(GNULIB_BUILDDIR)
1961 rm -f gdbserver/config.status gdbserver/config.log
1962 rm -f gdbserver/tm.h gdbserver/xm.h gdbserver/nm.h
1963 rm -f gdbserver/Makefile gdbserver/config.cache
1964 rm -f nm.h config.status config.h stamp-h b jit-reader.h
1965 rm -f gdb-gdb.py gdb-gdb.gdb
1966 rm -f y.output yacc.acts yacc.tmp y.tab.h
1967 rm -f config.log config.cache
1970 for i in $(CONFIG_SRC_SUBDIR); do \
1971 if test -d $$i/$(DEPDIR); then rmdir $$i/$(DEPDIR); fi \
1974 maintainer-clean: local-maintainer-clean do-maintainer-clean distclean
1975 realclean: maintainer-clean
1977 local-maintainer-clean:
1978 @echo "This command is intended for maintainers to use;"
1979 @echo "it deletes files that may require special tools to rebuild."
1982 ada-lex.c ada-exp.c \
1983 d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c rust-exp.c
1984 rm -f TAGS $(INFOFILES)
1986 rm -f nm.h config.status
1988 do-maintainer-clean:
1989 @$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(CLEANDIRS)" \
1992 diststuff: $(DISTSTUFF) $(PACKAGE).pot $(CATALOGS)
1993 cd doc; $(MAKE) $(MFLAGS) diststuff
1996 @for i in $(DODIRS); do \
1998 $(REQUIRED_SUBDIRS)) \
1999 if [ ! -f ./$$i/Makefile ] ; then \
2000 echo "Missing $$i/Makefile" >&2 ; \
2004 if [ -f ./$$i/Makefile ] ; then \
2006 $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
2007 else exit 1 ; fi ; \
2011 Makefile: Makefile.in config.status
2012 # Regenerate the Makefile and the tm.h / nm.h links.
2013 CONFIG_FILES="Makefile" \
2016 $(SHELL) config.status
2018 $(GNULIB_BUILDDIR)/Makefile: gnulib/Makefile.in config.status
2019 @cd $(GNULIB_BUILDDIR); CONFIG_FILES="Makefile" \
2020 CONFIG_COMMANDS="depfiles" \
2023 $(SHELL) config.status
2025 data-directory/Makefile: data-directory/Makefile.in config.status
2026 CONFIG_FILES="data-directory/Makefile" \
2027 CONFIG_COMMANDS="depfiles" \
2030 $(SHELL) config.status
2034 ./gdb$(EXEEXT) --data-directory=`pwd`/data-directory $(GDBFLAGS)
2036 jit-reader.h: $(srcdir)/jit-reader.in
2037 $(SHELL) config.status $@
2039 gcore: $(srcdir)/gcore.in
2040 $(SHELL) config.status $@
2042 gdb-gdb.py: $(srcdir)/gdb-gdb.py.in
2043 $(SHELL) config.status $@
2045 gdb-gdb.gdb: $(srcdir)/gdb-gdb.gdb.in
2046 $(SHELL) config.status $@
2048 config.h: stamp-h ; @true
2049 stamp-h: $(srcdir)/config.in config.status
2050 CONFIG_HEADERS=config.h:config.in \
2051 CONFIG_COMMANDS="default depdir" \
2054 $(SHELL) config.status
2056 config.status: $(srcdir)/configure configure.nat configure.tgt configure.host ../bfd/development.sh
2057 $(SHELL) config.status --recheck
2060 ACLOCAL_AMFLAGS = -I ../config
2062 # Keep these in sync with the includes in acinclude.m4.
2065 acx_configure_dir.m4 \
2069 ../config/acinclude.m4 \
2070 ../config/plugins.m4 \
2071 ../config/lead-dot.m4 \
2072 ../config/override.m4 \
2073 ../config/largefile.m4 \
2074 ../config/gettext-sister.m4 \
2075 ../config/lib-ld.m4 \
2076 ../config/lib-prefix.m4 \
2077 ../config/lib-link.m4 \
2080 ../config/depstand.m4 \
2081 ../config/lcmessage.m4 \
2082 ../config/codeset.m4 \
2085 $(srcdir)/aclocal.m4: @MAINTAINER_MODE_TRUE@ $(aclocal_m4_deps)
2086 cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
2089 configure_deps = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
2090 $(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(configure_deps)
2091 cd $(srcdir) && $(AUTOCONF)
2093 AUTOHEADER = autoheader
2094 $(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(configure_deps)
2095 cd $(srcdir) && $(AUTOHEADER)
2099 # automatic rebuilding in automake-generated Makefiles requires
2100 # this rule in the toplevel Makefile, which, with GNU make, causes
2101 # the desired updates through the implicit regeneration of the Makefile
2102 # and all of its prerequisites.
2109 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
2111 cd doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS)
2113 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
2115 cd doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS)
2117 # GDB MANUAL: TeX dvi file
2119 cd doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS)
2121 # GDB MANUAL: info file
2123 cd doc; $(MAKE) gdb.info $(FLAGS_TO_PASS)
2125 # Make copying.c from COPYING
2126 $(srcdir)/copying.c: @MAINTAINER_MODE_TRUE@ $(srcdir)/../COPYING3 $(srcdir)/copying.awk
2127 awk -f $(srcdir)/copying.awk \
2128 < $(srcdir)/../COPYING3 > $(srcdir)/copying.tmp
2129 mv $(srcdir)/copying.tmp $(srcdir)/copying.c
2131 version.c: stamp-version; @true
2132 # Note that the obvious names for the temp file are taken by
2133 # create-version.sh.
2134 stamp-version: Makefile version.in $(srcdir)/../bfd/version.h $(srcdir)/common/create-version.sh
2135 $(ECHO_GEN) $(SHELL) $(srcdir)/common/create-version.sh $(srcdir) \
2136 $(host_alias) $(target_alias) version-t.t
2137 @$(SHELL) $(srcdir)/../move-if-change version-t.t version.c
2138 @echo stamp > stamp-version
2141 gdb.cxref: $(SFILES)
2142 cxref -I. $(SFILES) >gdb.cxref
2146 # GNU Make has an annoying habit of putting *all* the Makefile variables
2147 # into the environment, unless you include this target as a circumvention.
2148 # Rumor is that this will be fixed (and this target can be removed)
2152 # GNU Make 3.63 has a different problem: it keeps tacking command line
2153 # overrides onto the definition of $(MAKE). This variable setting
2158 aarch64-fbsd-nat.c \
2159 aarch64-fbsd-tdep.c \
2160 aarch64-linux-nat.c \
2161 aarch64-linux-tdep.c \
2162 aarch64-newlib-tdep.c \
2168 alpha-linux-tdep.c \
2169 alpha-mdebug-tdep.c \
2174 amd64-darwin-tdep.c \
2175 amd64-dicos-tdep.c \
2179 amd64-linux-tdep.c \
2192 arm-get-next-pcs.c \
2199 arm-symbian-tdep.c \
2225 i386-cygwin-tdep.c \
2227 i386-darwin-tdep.c \
2244 ia64-libunwind-tdep.c \
2263 microblaze-linux-tdep.c \
2275 mips64-obsd-tdep.c \
2280 nios2-linux-tdep.c \
2293 ppc-ravenscar-thread.c \
2297 ravenscar-thread.c \
2301 rs6000-lynx178-tdep.c \
2321 sparc-linux-tdep.c \
2326 sparc-ravenscar-thread.c \
2330 sparc64-fbsd-nat.c \
2331 sparc64-fbsd-tdep.c \
2332 sparc64-linux-nat.c \
2333 sparc64-linux-tdep.c \
2335 sparc64-nbsd-nat.c \
2336 sparc64-nbsd-tdep.c \
2337 sparc64-obsd-nat.c \
2338 sparc64-obsd-tdep.c \
2339 sparc64-sol2-tdep.c \
2344 tilegx-linux-nat.c \
2345 tilegx-linux-tdep.c \
2358 xtensa-linux-nat.c \
2359 xtensa-linux-tdep.c \
2362 common/mingw-strerror.c \
2363 common/posix-strerror.c
2365 # Some files need explicit build rules (due to -Werror problems) or due
2366 # to sub-directory fun 'n' games.
2368 # Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually
2369 # checks format strings.
2370 printcmd.o: $(srcdir)/printcmd.c
2371 $(ECHO_CXX) $(COMPILE.pre) $(INTERNAL_CFLAGS) \
2372 $(GDB_WARN_CFLAGS_NO_FORMAT) $(COMPILE.post) \
2373 $(srcdir)/printcmd.c
2376 # Same for "target-float.c".
2377 target-float.o: $(srcdir)/target-float.c
2378 $(ECHO_CXX) $(COMPILE.pre) $(INTERNAL_CFLAGS) \
2379 $(GDB_WARN_CFLAGS_NO_FORMAT) $(COMPILE.post) \
2380 $(srcdir)/target-float.c
2382 # ada-exp.c can appear in srcdir, for releases; or in ., for
2383 # development builds.
2384 ADA_EXP_C = `if test -f ada-exp.c; then echo ada-exp.c; else echo $(srcdir)/ada-exp.c; fi`
2386 # Some versions of flex give output that triggers
2387 # -Wold-style-definition.
2388 ada-exp.o: ada-exp.c
2389 $(ECHO_CXX) $(COMPILE.pre) $(INTERNAL_CFLAGS) \
2390 $(GDB_WARN_CFLAGS_NO_DEFS) $(COMPILE.post) $(ADA_EXP_C)
2393 # Message files. Based on code in gcc/Makefile.in.
2395 # Rules for generating translated message descriptions. Disabled by
2396 # autoconf if the tools are not available.
2398 .PHONY: all-po install-po uninstall-po clean-po update-po $(PACKAGE).pot
2402 # This notation should be acceptable to all Make implementations used
2403 # by people who are interested in updating .po files.
2404 update-po: $(CATALOGS:.gmo=.pox)
2406 # N.B. We do not attempt to copy these into $(srcdir). The snapshot
2409 -test -d po || mkdir po
2410 $(GMSGFMT) --statistics -o $@ $<
2412 # The new .po has to be gone over by hand, so we deposit it into
2413 # build/po with a different extension. If build/po/$(PACKAGE).pot
2414 # exists, use it (it was just created), else use the one in srcdir.
2416 -test -d po || mkdir po
2417 $(MSGMERGE) $< `if test -f po/$(PACKAGE).pot; \
2418 then echo po/$(PACKAGE).pot; \
2419 else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o $@
2421 # This rule has to look for .gmo modules in both srcdir and the cwd,
2422 # and has to check that we actually have a catalog for each language,
2423 # in case they weren't built or included with the distribution.
2425 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(datadir)
2426 cats="$(CATALOGS)"; for cat in $$cats; do \
2427 lang=`basename $$cat | sed 's/\.gmo$$//'`; \
2428 if [ -f $$cat ]; then :; \
2429 elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
2432 dir=$(localedir)/$$lang/LC_MESSAGES; \
2433 echo $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir; \
2434 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir || exit 1; \
2435 echo $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
2436 $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
2439 cats="$(CATALOGS)"; for cat in $$cats; do \
2440 lang=`basename $$cat | sed 's/\.gmo$$//'`; \
2441 if [ -f $$cat ]; then :; \
2442 elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
2445 dir=$(localedir)/$$lang/LC_MESSAGES; \
2446 rm -f $(DESTDIR)$$dir/$(PACKAGE).mo; \
2448 # Delete po/*.gmo only if we are not building in the source directory.
2450 -if [ ! -f Makefile.in ]; then rm -f po/*.gmo; fi
2452 # Rule for regenerating the message template (gdb.pot). Instead of
2453 # forcing everyone to edit POTFILES.in, which proved impractical, this
2454 # rule has no dependencies and always regenerates gdb.pot. This is
2455 # relatively harmless since the .po files do not directly depend on
2456 # it. The .pot file is left in the build directory. Since GDB's
2457 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
2458 # files) force this rule.
2459 $(PACKAGE).pot: po/$(PACKAGE).pot
2460 po/$(PACKAGE).pot: force
2461 -test -d po || mkdir po
2462 sh -e $(srcdir)/po/gdbtext $(XGETTEXT) $(PACKAGE) . $(srcdir)
2466 # YACC/LEX dependencies
2468 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
2469 # exist in srcdir, then compiled in objdir to LANG-exp.o. If we
2470 # said LANG-exp.c rather than ./c-exp.c some makes would
2471 # sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
2472 # decls for malloc/realloc/free which conflict with everything else.
2473 # Strictly speaking c-exp.c should therefore depend on
2474 # Makefile.in, but that was a pretty big annoyance.
2477 $(ECHO_YACC) $(SHELL) $(YLWRAP) $< y.tab.c $@.tmp -- \
2478 $(YACC) $(YFLAGS) || (rm -f $@.tmp; false)
2479 @sed -e '/extern.*malloc/d' \
2480 -e '/extern.*realloc/d' \
2481 -e '/extern.*free/d' \
2482 -e '/include.*malloc.h/d' \
2483 -e 's/\([^x]\)malloc/\1xmalloc/g' \
2484 -e 's/\([^x]\)realloc/\1xrealloc/g' \
2485 -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
2486 -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
2487 -e '/^#line.*y.tab.c/d' \
2488 -e 's/YY_NULL/YY_NULLPTR/g' \
2489 < $@.tmp > $@.new && \
2493 $(ECHO_LEX) $(FLEX) -t $< \
2494 | sed -e '/extern.*malloc/d' \
2495 -e '/extern.*realloc/d' \
2496 -e '/extern.*free/d' \
2497 -e '/include.*malloc.h/d' \
2498 -e 's/\([^x]\)malloc/\1xmalloc/g' \
2499 -e 's/\([^x]\)realloc/\1xrealloc/g' \
2500 -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
2501 -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
2502 -e 's/yy_flex_xrealloc/yyxrealloc/g' \
2506 .PRECIOUS: ada-lex.c
2510 xml-builtin.c: stamp-xml; @true
2511 stamp-xml: $(srcdir)/features/feature_to_c.sh Makefile $(XMLFILES)
2512 $(SILENCE) rm -f xml-builtin.tmp
2513 $(ECHO_GEN_XML_BUILTIN) AWK="$(AWK)" \
2514 $(SHELL) $(srcdir)/features/feature_to_c.sh \
2515 xml-builtin.tmp $(XMLFILES)
2516 $(SILENCE) $(SHELL) $(srcdir)/../move-if-change xml-builtin.tmp xml-builtin.c
2517 $(SILENCE) echo stamp > stamp-xml
2519 .PRECIOUS: xml-builtin.c
2522 # GDBTK sub-directory
2525 all-gdbtk: insight$(EXEEXT)
2528 transformed_name=`t='$(program_transform_name)'; \
2529 echo insight | sed -e $$t` ; \
2530 if test "x$$transformed_name" = x; then \
2531 transformed_name=insight ; \
2535 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir); \
2536 $(INSTALL_PROGRAM) insight$(EXEEXT) \
2537 $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
2538 $(SHELL) $(srcdir)/../mkinstalldirs \
2539 $(DESTDIR)$(GDBTK_LIBRARY) ; \
2540 $(SHELL) $(srcdir)/../mkinstalldirs \
2541 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION) ; \
2542 $(INSTALL_DATA) $(srcdir)/gdbtk/plugins/plugins.tcl \
2543 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION)/plugins.tcl ; \
2544 $(SHELL) $(srcdir)/../mkinstalldirs \
2545 $(DESTDIR)$(GDBTK_LIBRARY)/images \
2546 $(DESTDIR)$(GDBTK_LIBRARY)/images2 ; \
2547 $(SHELL) $(srcdir)/../mkinstalldirs \
2548 $(DESTDIR)$(GDBTK_LIBRARY)/help \
2549 $(DESTDIR)$(GDBTK_LIBRARY)/help/images \
2550 $(DESTDIR)$(GDBTK_LIBRARY)/help/trace ; \
2551 cd $(srcdir)/gdbtk/library ; \
2552 for i in *.tcl *.itcl *.ith *.itb images/*.gif images2/*.gif images/icons.txt images2/icons.txt tclIndex help/*.html help/trace/*.html help/trace/index.toc help/images/*.gif help/images/*.png; \
2554 $(INSTALL_DATA) $$i $(DESTDIR)$(GDBTK_LIBRARY)/$$i ; \
2558 transformed_name=`t='$(program_transform_name)'; \
2559 echo insight | sed -e $$t` ; \
2560 if test "x$$transformed_name" = x; then \
2561 transformed_name=insight ; \
2565 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
2566 rm -rf $(DESTDIR)$(GDBTK_LIBRARY)
2569 rm -f insight$(EXEEXT)
2571 # Removing the old gdb first works better if it is running, at least on SunOS.
2572 insight$(EXEEXT): gdbtk-main.o libgdb.a $(CDEPS) $(TDEPLIBS)
2573 rm -f insight$(EXEEXT)
2574 $(ECHO_CXXLD) $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
2575 -o insight$(EXEEXT) gdbtk-main.o libgdb.a \
2576 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
2578 gdbres.o: $(srcdir)/gdbtk/gdb.rc $(srcdir)/gdbtk/gdbtool.ico
2579 $(WINDRES) --include $(srcdir)/gdbtk $(srcdir)/gdbtk/gdb.rc gdbres.o
2581 all_gdbtk_cflags = $(IDE_CFLAGS) $(ITCL_CFLAGS) \
2582 $(ITK_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
2584 -DGDBTK_LIBRARY=\"$(GDBTK_LIBRARY)\" \
2585 -DSRC_DIR=\"$(GDBTK_SRC_DIR)\"
2588 # Dependency tracking.
2591 ifeq ($(DEPMODE),depmode=gcc3)
2592 # Note that we put the dependencies into a .Tpo file, then move them
2593 # into place if the compile succeeds. We need this because gcc does
2594 # not atomically write the dependency output file.
2595 override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
2596 -MF $(@D)/$(DEPDIR)/$(basename $(@F)).Tpo
2597 override POSTCOMPILE = @mv $(@D)/$(DEPDIR)/$(basename $(@F)).Tpo \
2598 $(@D)/$(DEPDIR)/$(basename $(@F)).Po
2600 override COMPILE.pre = source='$<' object='$@' libtool=no \
2601 DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) \
2602 $(CXX) -x c++ $(CXX_DIALECT)
2603 # depcomp handles atomicity for us, so we don't need a postcompile
2605 override POSTCOMPILE =
2608 # A list of all the objects we might care about in this build, for
2609 # dependency tracking.
2610 all_object_files = gdb.o $(LIBGDB_OBS) gdbtk-main.o \
2611 test-cp-name-parser.o
2613 # All the .deps files to include.
2614 all_deps_files = $(foreach dep,$(patsubst %.o,%.Po,$(all_object_files)),\
2615 $(dir $(dep))/$(DEPDIR)/$(notdir $(dep)))
2617 # Ensure that generated files are created early. Use order-only
2618 # dependencies if available. They require GNU make 3.80 or newer,
2619 # and the .VARIABLES variable was introduced at the same time.
2621 $(all_object_files): | $(generated_files)
2623 $(all_object_files) : $(generated_files)
2627 -include $(all_deps_files)
2629 # Disable implicit make rules.
2630 include $(srcdir)/disable-implicit-rules.mk
2632 ### end of the gdb Makefile.in.