1 # Copyright (C) 1989-2018 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 3 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see <http://www.gnu.org/licenses/>.
18 # Please keep lists in this file sorted alphabetically, with one item per line.
19 # Here are the general guidelines for ordering files and directories:
21 # - Files come before directories.
22 # - The extensions are not taken into account when comparing filenames, except
23 # if the filenames are otherwise equal.
24 # - A filename that is a prefix of another one comes before.
25 # - Underscores and dashes are treated equally, and come before alphanumeric
38 exec_prefix = @exec_prefix@
40 host_alias = @host_alias@
41 target_alias = @target_alias@
42 program_transform_name = @program_transform_name@
45 tooldir = $(libdir)/$(target_alias)
48 localedir = @localedir@
50 man1dir = $(mandir)/man1
51 man2dir = $(mandir)/man2
52 man3dir = $(mandir)/man3
53 man4dir = $(mandir)/man4
54 man5dir = $(mandir)/man5
55 man6dir = $(mandir)/man6
56 man7dir = $(mandir)/man7
57 man8dir = $(mandir)/man8
58 man9dir = $(mandir)/man9
60 datarootdir = @datarootdir@
64 includedir = @includedir@
66 install_sh = @install_sh@
68 # This can be referenced by `LIBINTL' as computed by
69 # ZW_GNU_GETTEXT_SISTER_DIR.
79 INSTALL_PROGRAM = @INSTALL_PROGRAM@
80 INSTALL_SCRIPT = @INSTALL_SCRIPT@
81 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
82 INSTALL_DATA = @INSTALL_DATA@
101 # If you are compiling with GCC, make sure that either 1) You have the
102 # fixed include files where GCC can reach them, or 2) You use the
103 # -traditional flag. Otherwise the ioctl calls in inflow.c
104 # will be incorrectly compiled. The "fixincludes" script in the gcc
105 # distribution will fix your include files up.
108 CXX_DIALECT = @CXX_DIALECT@
110 # Dependency tracking information.
111 DEPMODE = @CCDEPMODE@
113 depcomp = $(SHELL) $(srcdir)/../depcomp
115 # Note that these are overridden by GNU make-specific code below if
116 # GNU make is used. The overrides implement dependency tracking.
117 COMPILE.pre = $(CXX) -x c++ $(CXX_DIALECT)
118 COMPILE.post = -c -o $@
119 COMPILE = $(COMPILE.pre) $(INTERNAL_CFLAGS) $(COMPILE.post)
122 # Directory containing source files.
125 top_srcdir = @top_srcdir@
129 # This is used to rebuild ada-lex.c from ada-lex.l. If the program is
130 # not defined, but ada-lex.c is present, compilation will continue,
131 # possibly with a warning.
134 YLWRAP = $(srcdir)/../ylwrap
136 # where to find makeinfo, preferably one designed for texinfo-2
137 MAKEINFO = @MAKEINFO@
138 MAKEINFOFLAGS = @MAKEINFOFLAGS@
139 MAKEINFO_EXTRA_FLAGS = @MAKEINFO_EXTRA_FLAGS@
140 MAKEINFO_CMD = $(MAKEINFO) $(MAKEINFOFLAGS) $(MAKEINFO_EXTRA_FLAGS)
142 MAKEHTML = $(MAKEINFO_CMD) --html
145 # Set this up with gcc if you have gnu ld and the loader will print out
146 # line numbers for undefined references.
148 CC_LD = $(CXX) $(CXX_DIALECT)
150 # Where is our "include" directory? Typically $(srcdir)/../include.
151 # This is essentially the header file directory for the library
152 # routines in libiberty.
153 INCLUDE_DIR = $(srcdir)/../include
154 INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
156 # Where is the "-liberty" library? Typically in ../libiberty.
157 LIBIBERTY = ../libiberty/libiberty.a
159 # Where is the BFD library? Typically in ../bfd.
161 BFD = $(BFD_DIR)/libbfd.a
162 BFD_SRC = $(srcdir)/$(BFD_DIR)
163 BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
165 # This is where we get zlib from. zlibdir is -L../zlib and zlibinc is
166 # -I../zlib, unless we were configured with --with-system-zlib, in which
167 # case both are empty.
171 # Where is the decnumber library? Typically in ../libdecnumber.
172 LIBDECNUMBER_DIR = ../libdecnumber
173 LIBDECNUMBER = $(LIBDECNUMBER_DIR)/libdecnumber.a
174 LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)
175 LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)
177 # Where is the READLINE library? Typically in ../readline.
178 READLINE_DIR = ../readline
179 READLINE_SRC = $(srcdir)/$(READLINE_DIR)
180 READLINE = @READLINE@
181 READLINE_DEPS = @READLINE_DEPS@
182 READLINE_CFLAGS = @READLINE_CFLAGS@
184 # Where is expat? This will be empty if expat was not available.
185 LIBEXPAT = @LIBEXPAT@
187 # Where is lzma? This will be empty if lzma was not available.
190 # Where is libbabeltrace? This will be empty if lbabeltrace was not
192 LIBBABELTRACE = @LIBBABELTRACE@
194 # Where is libipt? This will be empty if libipt was not available.
197 # Where is libmpfr? This will be empty if libmpfr was not available.
200 WARN_CFLAGS = @WARN_CFLAGS@
201 WERROR_CFLAGS = @WERROR_CFLAGS@
202 GDB_WARN_CFLAGS = $(WARN_CFLAGS)
203 GDB_WERROR_CFLAGS = $(WERROR_CFLAGS)
205 GDB_WARN_CFLAGS_NO_FORMAT = `echo " $(GDB_WARN_CFLAGS) " \
206 | sed "s/ -Wformat-nonliteral / -Wno-format-nonliteral /g"`
207 GDB_WARN_CFLAGS_NO_DEFS = `echo " $(GDB_WARN_CFLAGS) " \
208 | sed "s/ -Wold-style-definition / -Wno-old-style-definition /g"`
210 RDYNAMIC = @RDYNAMIC@
212 # Where is the INTL library? Typically in ../intl.
214 INTL_DEPS = @LIBINTL_DEP@
215 INTL_CFLAGS = @INCINTL@
217 # Where is the ICONV library? This will be empty if in libc or not available.
218 LIBICONV = @LIBICONV@
220 # Did the user give us a --with-gdb-datadir option?
221 GDB_DATADIR = @GDB_DATADIR@
223 # Flags to pass to gdb when invoked with "make run".
226 # Helper code from gnulib.
227 GNULIB_BUILDDIR = build-gnulib
228 LIBGNU = $(GNULIB_BUILDDIR)/import/libgnu.a
229 INCGNU = -I$(srcdir)/gnulib/import -I$(GNULIB_BUILDDIR)/import
231 # Generated headers in the gnulib directory. These must be listed
232 # so that they are generated before other files are compiled.
233 GNULIB_H = $(GNULIB_BUILDDIR)/import/string.h @GNULIB_STDINT_H@
236 # CLI sub directory definitons
248 SUBDIR_CLI_OBS = $(patsubst %.c,%.o,$(SUBDIR_CLI_SRCS))
255 # MI sub directory definitons
276 SUBDIR_MI_OBS = $(patsubst %.c,%.o,$(SUBDIR_MI_SRCS))
283 # TUI sub directory definitions
301 tui/tui-wingeneral.c \
304 SUBDIR_TUI_OBS = $(patsubst %.c,%.o,$(SUBDIR_TUI_SRCS))
308 SUBDIR_TUI_CFLAGS = -DTUI=1
311 # GCC Compile support sub-directory definitions
313 SUBDIR_GCC_COMPILE_SRCS = \
315 compile/compile-c-support.c \
316 compile/compile-c-symbols.c \
317 compile/compile-c-types.c \
318 compile/compile-loc2c.c \
319 compile/compile-object-load.c \
320 compile/compile-object-load.h \
321 compile/compile-object-run.c \
322 compile/compile-object-run.h
324 SUBDIR_GCC_COMPILE_OBS = $(patsubst %.c,%.o,$(filter %.c,$(SUBDIR_GCC_COMPILE_SRCS)))
327 # Guile sub directory definitons for guile support.
329 SUBDIR_GUILE_SRCS = \
332 guile/scm-auto-load.c \
334 guile/scm-breakpoint.c \
337 guile/scm-exception.c \
340 guile/scm-iterator.c \
341 guile/scm-lazy-string.c \
343 guile/scm-objfile.c \
346 guile/scm-pretty-print.c \
347 guile/scm-progspace.c \
348 guile/scm-safe-call.c \
356 SUBDIR_GUILE_OBS = $(patsubst %.c,%.o,$(SUBDIR_GUILE_SRCS))
359 SUBDIR_GUILE_LDFLAGS =
360 SUBDIR_GUILE_CFLAGS =
363 # python sub directory definitons
365 SUBDIR_PYTHON_SRCS = \
367 python/py-auto-load.c \
369 python/py-bpevent.c \
370 python/py-breakpoint.c \
372 python/py-continueevent.c \
374 python/py-evtregistry.c \
376 python/py-exitedevent.c \
377 python/py-finishbreakpoint.c \
379 python/py-framefilter.c \
380 python/py-function.c \
381 python/py-gdb-readline.c \
382 python/py-inferior.c \
383 python/py-infevents.c \
384 python/py-infthread.c \
385 python/py-instruction.c \
386 python/py-lazy-string.c \
387 python/py-linetable.c \
388 python/py-newobjfileevent.c \
389 python/py-objfile.c \
391 python/py-prettyprint.c \
392 python/py-progspace.c \
394 python/py-record-btrace.c \
395 python/py-record-full.c \
396 python/py-signalevent.c \
397 python/py-stopevent.c \
400 python/py-threadevent.c \
406 python/py-xmethods.c \
409 SUBDIR_PYTHON_OBS = $(patsubst %.c,%.o,$(SUBDIR_PYTHON_SRCS))
412 SUBDIR_PYTHON_LDFLAGS =
413 SUBDIR_PYTHON_CFLAGS =
415 SUBDIR_UNITTESTS_SRCS = \
416 unittests/array-view-selftests.c \
417 unittests/common-utils-selftests.c \
418 unittests/environ-selftests.c \
419 unittests/function-view-selftests.c \
420 unittests/lookup_name_info-selftests.c \
421 unittests/memory-map-selftests.c \
422 unittests/memrange-selftests.c \
423 unittests/offset-type-selftests.c \
424 unittests/optional-selftests.c \
425 unittests/ptid-selftests.c \
426 unittests/rsp-low-selftests.c \
427 unittests/scoped_restore-selftests.c \
428 unittests/xml-utils-selftests.c
430 SUBDIR_UNITTESTS_OBS = $(patsubst %.c,%.o,$(SUBDIR_UNITTESTS_SRCS))
432 SUBDIR_TARGET_SRCS = target/waitstatus.c
433 SUBDIR_TARGET_OBS = $(patsubst %.c,%.o,$(SUBDIR_TARGET_SRCS))
436 # Opcodes currently live in one of two places. Either they are in the
437 # opcode library, typically ../opcodes, or they are in a header file
439 # Where is the "-lopcodes" library, with (some of) the opcode tables and
441 OPCODES_DIR = ../opcodes
442 OPCODES_SRC = $(srcdir)/$(OPCODES_DIR)
443 OPCODES = $(OPCODES_DIR)/libopcodes.a
444 # Where are the other opcode tables which only have header file
446 OP_INCLUDE = $(INCLUDE_DIR)/opcode
447 # Some source files like to use #include "opcodes/file.h"
448 OPCODES_CFLAGS = -I$(OP_INCLUDE) -I$(OPCODES_SRC)/..
450 # The simulator is usually nonexistent; targets that include one
451 # should set this to list all the .o or .a files to be linked in.
454 WIN32LIBS = @WIN32LIBS@
456 # Tcl et al cflags and libraries
458 TCL_CFLAGS = @TCL_INCLUDE@
459 GDBTKLIBS = @GDBTKLIBS@
460 # Extra flags that the GDBTK files need:
461 GDBTK_CFLAGS = @GDBTK_CFLAGS@
464 TK_CFLAGS = @TK_INCLUDE@
466 X11_CFLAGS = @TK_XINCLUDES@
470 WIN32LDAPP = @WIN32LDAPP@
473 GUI_CFLAGS_X = @GUI_CFLAGS_X@
474 IDE_CFLAGS = $(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
476 ALL_TCL_CFLAGS = $(TCL_CFLAGS) $(TK_CFLAGS)
478 # The version of gdbtk we're building. This should be kept
479 # in sync with GDBTK_VERSION and friends in gdbtk.h.
481 GDBTK_LIBRARY = $(datadir)/insight$(GDBTK_VERSION)
483 # Gdbtk requires an absolute path to the source directory or
484 # the testsuite won't run properly.
485 GDBTK_SRC_DIR = @GDBTK_SRC_DIR@
498 SUBDIR_GDBTK_SRCS = \
499 gdbtk/generic/gdbtk.c \
500 gdbtk/generic/gdbtk-bp.c \
501 gdbtk/generic/gdbtk-cmds.c \
502 gdbtk/generic/gdbtk-hooks.c \
503 gdbtk/generic/gdbtk-interp.c \
504 gdbtk/generic/gdbtk-main.c \
505 gdbtk/generic/gdbtk-register.c \
506 gdbtk/generic/gdbtk-stack.c \
507 gdbtk/generic/gdbtk-varobj.c \
508 gdbtk/generic/gdbtk-wrapper.c
510 SUBDIR_GDBTK_DEPS = $(LIBGUI) $(TCL_DEPS) $(TK_DEPS)
511 SUBDIR_GDBTK_LDFLAGS =
512 SUBDIR_GDBTK_CFLAGS = -DGDBTK
514 CONFIG_OBS = @CONFIG_OBS@
515 CONFIG_SRCS = @CONFIG_SRCS@
516 CONFIG_DEPS = @CONFIG_DEPS@
517 CONFIG_LDFLAGS = @CONFIG_LDFLAGS@
518 ENABLE_CFLAGS = @ENABLE_CFLAGS@
519 CONFIG_ALL = @CONFIG_ALL@
520 CONFIG_CLEAN = @CONFIG_CLEAN@
521 CONFIG_INSTALL = @CONFIG_INSTALL@
522 CONFIG_UNINSTALL = @CONFIG_UNINSTALL@
523 HAVE_NATIVE_GCORE_TARGET = @HAVE_NATIVE_GCORE_TARGET@
525 CONFIG_SRC_SUBDIR = arch cli mi compile tui unittests guile python target
526 CONFIG_DEP_SUBDIR = $(addsuffix /$(DEPDIR),$(CONFIG_SRC_SUBDIR))
528 # -I. for config files.
529 # -I$(srcdir) for gdb internal headers.
530 # -I$(srcdir)/config for more generic config files.
532 # It is also possible that you will need to add -I/usr/include/sys if
533 # your system doesn't have fcntl.h in /usr/include (which is where it
534 # should be according to Posix).
536 GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/common -I$(srcdir)/config \
537 -DLOCALEDIR="\"$(localedir)\"" $(DEFS)
539 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
540 GLOBAL_CFLAGS = $(MH_CFLAGS)
542 PROFILE_CFLAGS = @PROFILE_CFLAGS@
544 # These are specifically reserved for setting from the command line
545 # when running make. I.E.: "make CFLAGS=-Wmissing-prototypes".
547 CXXFLAGS = @CXXFLAGS@
549 # Set by configure, for e.g. expat. Python installations are such that
550 # C headers are included using their basename (for example, we #include
551 # <Python.h> rather than, say, <python/Python.h>). Since the file names
552 # are sometimes a little generic, we think that the risk of collision
553 # with other header files is high. If that happens, we try to mitigate
554 # a bit the consequences by putting the Python includes last in the list.
555 INTERNAL_CPPFLAGS = @CPPFLAGS@ @GUILE_CPPFLAGS@ @PYTHON_CPPFLAGS@
557 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
558 INTERNAL_CFLAGS_BASE = \
559 $(CXXFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
560 $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) $(ZLIBINC) \
561 $(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \
562 $(INTL_CFLAGS) $(INCGNU) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS)
563 INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS)
564 INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS)
566 # LDFLAGS is specifically reserved for setting from the command line
570 # Profiling options need to go here to work.
571 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
572 # and have it work; that's why CFLAGS is here.
573 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
575 $(CXXFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) \
576 $(LDFLAGS) $(CONFIG_LDFLAGS)
578 # If your system is missing alloca(), or, more likely, it's there but
579 # it doesn't work, then refer to libiberty.
581 # Libraries and corresponding dependencies for compiling gdb.
582 # XM_CLIBS, defined in *config files, have host-dependent libs.
583 # LIBIBERTY appears twice on purpose.
584 CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(ZLIB) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
585 $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) \
586 @LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \
587 $(LIBEXPAT) $(LIBLZMA) $(LIBBABELTRACE) $(LIBIPT) \
588 $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU) $(LIBICONV) $(LIBMPFR)
589 CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
590 $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
592 ADD_FILES = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
593 ADD_DEPS = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
597 LINT = /usr/5bin/lint
598 LINTFLAGS = $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
599 $(BFD_CFLAGS) $(INCLUDE_CFLAGS) \
605 # XML files to build in to GDB.
607 $(srcdir)/features/btrace.dtd \
608 $(srcdir)/features/btrace-conf.dtd \
609 $(srcdir)/features/gdb-target.dtd \
610 $(srcdir)/features/library-list.dtd \
611 $(srcdir)/features/library-list-aix.dtd \
612 $(srcdir)/features/library-list-svr4.dtd \
613 $(srcdir)/features/osdata.dtd \
614 $(srcdir)/features/threads.dtd \
615 $(srcdir)/features/traceframe-info.dtd \
616 $(srcdir)/features/xinclude.dtd
618 # Build the ser-*.o files the host supports. This includes ser-unix.o
619 # for any system that supports a POSIX interface to the serial port.
621 SER_HARDWIRE = @SER_HARDWIRE@
623 # This is remote-sim.o if a simulator is to be linked in.
626 # Target-dependent object files.
627 TARGET_OBS = @TARGET_OBS@
629 # All target-dependent objects files that require 64-bit CORE_ADDR
630 # (used with --enable-targets=all --enable-64-bit-bfd).
631 ALL_64_TARGET_OBS = \
632 aarch64-fbsd-tdep.o \
633 aarch64-linux-tdep.o \
634 aarch64-newlib-tdep.o \
638 alpha-mdebug-tdep.o \
642 amd64-darwin-tdep.o \
650 amd64-windows-tdep.o \
652 arch/aarch64-insn.o \
658 sparc64-fbsd-tdep.o \
659 sparc64-linux-tdep.o \
660 sparc64-nbsd-tdep.o \
661 sparc64-obsd-tdep.o \
662 sparc64-sol2-tdep.o \
665 # All other target-dependent objects files (used with --enable-targets=all).
669 arch/arm-get-next-pcs.o \
725 microblaze-linux-tdep.o \
732 mn10300-linux-tdep.o \
747 ppc-ravenscar-thread.o \
753 rs6000-lynx178-tdep.o \
772 sparc-ravenscar-thread.o \
780 tilegx-linux-tdep.o \
789 xtensa-linux-tdep.o \
792 # The following native-target dependent variables are defined on
794 NAT_FILE = @NAT_FILE@
795 NATDEPFILES = @NATDEPFILES@
796 NAT_CDEPS = @NAT_CDEPS@
797 LOADLIBES = @LOADLIBES@
798 MH_CFLAGS = @MH_CFLAGS@
799 XM_CLIBS = @XM_CLIBS@
800 NAT_GENERATED_FILES = @NAT_GENERATED_FILES@
801 HAVE_NATIVE_GCORE_HOST = @HAVE_NATIVE_GCORE_HOST@
803 # Native-target dependent makefile fragment comes in here.
806 # End of native-target dependent variables.
810 "exec_prefix=$(exec_prefix)" \
811 "infodir=$(infodir)" \
812 "datarootdir=$(datarootdir)" \
814 "htmldir=$(htmldir)" \
818 "datadir=$(datadir)" \
819 "includedir=$(includedir)" \
820 "against=$(against)" \
821 "DESTDIR=$(DESTDIR)" \
823 "AR_FLAGS=$(AR_FLAGS)" \
827 "CXX_DIALECT=$(CXX_DIALECT)" \
828 "CXXFLAGS=$(CXXFLAGS)" \
829 "DLLTOOL=$(DLLTOOL)" \
830 "LDFLAGS=$(LDFLAGS)" \
832 "MAKEINFO=$(MAKEINFO)" \
833 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
834 "MAKEINFO_EXTRA_FLAGS=$(MAKEINFO_EXTRA_FLAGS)" \
835 "MAKEHTML=$(MAKEHTML)" \
836 "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
837 "INSTALL=$(INSTALL)" \
838 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
839 "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
840 "INSTALL_DATA=$(INSTALL_DATA)" \
841 "RUNTEST=$(RUNTEST)" \
842 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
844 # Flags that we pass when building the testsuite.
846 # empty for native, $(target_alias)/ for cross
847 target_subdir = @target_subdir@
850 if [ -f $${rootme}/../gcc/xgcc ] ; then \
851 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
852 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
854 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
857 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
860 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
865 if [ -f $${rootme}/../gcc/xg++ ] ; then \
866 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
867 echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
869 echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/; \
872 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
875 t='$(program_transform_name)'; echo g++ | sed -e '' $$t; \
879 # The use of $$(x_FOR_TARGET) reduces the command line length by not
880 # duplicating the lengthy definition.
881 TARGET_FLAGS_TO_PASS = \
883 "exec_prefix=$(exec_prefix)" \
884 "against=$(against)" \
885 'CC=$$(CC_FOR_TARGET)' \
886 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
888 'CXX=$$(CXX_FOR_TARGET)' \
889 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
890 "CXXFLAGS=$(CXXFLAGS)" \
891 "INSTALL=$(INSTALL)" \
892 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
893 "INSTALL_DATA=$(INSTALL_DATA)" \
894 "MAKEINFO=$(MAKEINFO)" \
895 "MAKEHTML=$(MAKEHTML)" \
896 "RUNTEST=$(RUNTEST)" \
897 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
898 "FORCE_PARALLEL=$(FORCE_PARALLEL)" \
901 # All source files that go into linking GDB.
903 # Files that should wind up in SFILES and whose corresponding .o
904 # should be in COMMON_OBS.
924 break-catch-syscall.c \
925 break-catch-throw.c \
961 dwarf2-frame-tailcall.c \
974 filename-seen-cache.c \
988 gdbarch-selftests.c \
1039 progspace-and-thread.c \
1069 target-descriptions.c \
1095 # Links made at configuration time should not be specified here, since
1096 # SFILES is used in building the distribution archive.
1121 common/btrace-common.c \
1124 common/common-debug.c \
1125 common/common-exceptions.c \
1126 common/common-regcache.c \
1127 common/common-utils.c \
1131 common/filestuff.c \
1133 common/job-control.c \
1134 common/gdb_tilde_expand.c \
1137 common/print-utils.c \
1140 common/run-time-clock.c \
1142 common/signals-state-save-restore.c \
1144 common/xml-utils.c \
1146 $(SUBDIR_TARGET_SRCS) \
1148 $(SUBDIR_GCC_COMPILE_SRCS)
1150 LINTFILES = $(SFILES) $(YYFILES) $(CONFIG_SRCS) init.c
1152 # Header files that need to have srcdir added. Note that in the cases
1153 # where we use a macro like $(gdbcmd_h), things are carefully arranged
1154 # so that each .h file is listed exactly once (M-x tags-search works
1155 # wrong if TAGS has files twice). Because this is tricky to get
1156 # right, it is probably easiest just to list .h files here directly.
1158 HFILES_NO_SRCDIR = \
1164 amd64-darwin-tdep.h \
1165 amd64-linux-tdep.h \
1206 dwarf2-frame-tailcall.h \
1231 gdb_proc_service.h \
1248 hppa-linux-offsets.h \
1251 i386-darwin-tdep.h \
1256 ia64-libunwind-tdep.h \
1309 ppc-ravenscar-thread.h \
1316 progspace-and-thread.h \
1320 ravenscar-thread.h \
1354 sparc-ravenscar-thread.h \
1365 target-descriptions.h \
1395 arch/aarch64-insn.h \
1405 common/common-debug.h \
1406 common/common-defs.h \
1407 common/common-exceptions.h \
1408 common/common-gdbthread.h \
1409 common/common-regcache.h \
1410 common/common-types.h \
1411 common/common-utils.h \
1412 common/job-control.h \
1417 common/gdb_assert.h \
1418 common/gdb_tilde_expand.h \
1419 common/gdb_locale.h \
1420 common/gdb_setjmp.h \
1421 common/gdb_signals.h \
1422 common/gdb_sys_time.h \
1425 common/common-inferior.h \
1426 common/host-defs.h \
1427 common/print-utils.h \
1431 common/run-time-clock.h \
1432 common/signals-state-save-restore.h \
1436 common/x86-xstate.h \
1437 common/xml-utils.h \
1441 config/djgpp/langinfo.h \
1442 config/djgpp/nl_types.h \
1443 config/i386/nm-fbsd.h \
1444 config/i386/nm-i386gnu.h \
1445 config/sparc/nm-sol2.h \
1446 gnulib/import/inttypes.in.h \
1447 gnulib/import/stddef.in.h \
1448 gnulib/import/stdint.in.h \
1449 gnulib/import/str-two-way.h \
1450 gnulib/import/string.in.h \
1451 gnulib/import/extra/snippet/arg-nonnull.h \
1452 gnulib/import/extra/snippet/c++defs.h \
1453 gnulib/import/extra/snippet/warn-on-use.h \
1461 nat/aarch64-linux.h \
1462 nat/aarch64-linux-hw-point.h \
1463 nat/amd64-linux-siginfo.h \
1465 nat/gdb_thread_db.h \
1466 nat/fork-inferior.h \
1467 nat/linux-btrace.h \
1468 nat/linux-namespaces.h \
1470 nat/linux-osdata.h \
1471 nat/linux-personality.h \
1472 nat/linux-ptrace.h \
1473 nat/linux-waitpid.h \
1474 nat/mips-linux-watch.h \
1478 nat/x86-gcc-cpuid.h \
1480 nat/x86-linux-dregs.h \
1482 python/py-events.h \
1483 python/py-stopevent.h \
1485 python/python-internal.h \
1486 regformats/regdef.h \
1490 target/waitstatus.h \
1504 tui/tui-wingeneral.h \
1507 # Header files that already have srcdir in them, or which are in objdir.
1509 HFILES_WITH_SRCDIR = \
1513 # GDB "info" files, which should be included in their entirety
1514 INFOFILES = gdb.info*
1516 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
1517 # default their values the way we do for SER_HARDWIRE; in the future
1518 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
1519 # variables analogous to SER_HARDWIRE which get defaulted in this
1522 DEPFILES = $(TARGET_OBS) $(SER_HARDWIRE) $(NATDEPFILES) \
1523 $(REMOTE_OBS) $(SIM_OBS)
1525 SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES) $(CONFIG_SRCS)
1526 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
1527 # and it's more useful to see it in the .y file.
1528 TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \
1530 TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
1532 COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
1538 common-exceptions.o \
1548 gdb_tilde_expand.o \
1557 signals-state-save-restore.o \
1562 $(patsubst %.c,%.o,$(COMMON_SFILES)) \
1563 $(SUBDIR_TARGET_OBS) \
1564 $(SUBDIR_GCC_COMPILE_OBS)
1568 SUBDIRS = doc @subdirs@ data-directory $(GNULIB_BUILDDIR)
1569 CLEANDIRS = $(SUBDIRS)
1571 # List of subdirectories in the build tree that must exist.
1572 # This is used to force build failures in existing trees when
1573 # a new directory is added.
1574 # The format here is for the `case' shell command.
1575 REQUIRED_SUBDIRS = doc | testsuite | $(GNULIB_BUILDDIR) | data-directory
1577 # Parser intermediate files.
1590 # ada-lex.c is included by another file, so it shouldn't wind up as a
1592 YYOBJ = $(filter-out ada-lex.o,$(patsubst %.c,%.o,$(YYFILES)))
1594 # Things which need to be built when making a distribution.
1596 DISTSTUFF = $(YYFILES)
1599 # All generated files which can be included by another file.
1608 $(NAT_GENERATED_FILES)
1610 # Flags needed to compile Python code
1611 PYTHON_CFLAGS = @PYTHON_CFLAGS@
1613 all: gdb$(EXEEXT) $(CONFIG_ALL)
1614 @$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
1616 # Rule for compiling .c files in the top-level gdb directory.
1617 # The order-only dependencies ensure that we create the build subdirectories.
1618 %.o: %.c | $(CONFIG_DEP_SUBDIR)
1622 $(CONFIG_DEP_SUBDIR):
1623 $(SHELL) $(srcdir)/../mkinstalldirs $@
1625 # Python files need special flags.
1626 python/%.o: INTERNAL_CFLAGS += $(PYTHON_CFLAGS)
1628 # Rules for compiling .c files in the various source subdirectories.
1629 %.o: ${srcdir}/common/%.c
1633 %.o: $(srcdir)/gdbtk/generic/%.c
1634 $(COMPILE) $(all_gdbtk_cflags) $<
1637 %.o: ${srcdir}/nat/%.c
1641 # Specify an explicit rule for gdb/common/agent.c, to avoid a clash with the
1642 # object file generate by gdb/agent.c.
1643 common-agent.o: $(srcdir)/common/agent.c
1644 $(COMPILE) $(srcdir)/common/agent.c
1649 # The check target can not use subdir_do, because subdir_do does not
1650 # use TARGET_FLAGS_TO_PASS.
1652 @if [ -f testsuite/Makefile ]; then \
1653 rootme=`pwd`; export rootme; \
1654 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1656 $(MAKE) $(TARGET_FLAGS_TO_PASS) check; \
1660 @if [ -f testsuite/Makefile ]; then \
1661 rootme=`pwd`; export rootme; \
1662 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1664 $(MAKE) $(TARGET_FLAGS_TO_PASS) check-perf; \
1668 @if [ -f testsuite/Makefile ]; then \
1669 rootme=`pwd`; export rootme; \
1670 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1672 $(MAKE) $(TARGET_FLAGS_TO_PASS) check-read1; \
1675 check-parallel: force
1676 @if [ -f testsuite/Makefile ]; then \
1677 rootme=`pwd`; export rootme; \
1678 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1680 $(MAKE) $(TARGET_FLAGS_TO_PASS) check-parallel; \
1683 # The idea is to parallelize testing of multilibs, for example:
1684 # make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
1685 # will run 3 concurrent sessions of check, eventually testing all 10
1686 # combinations. GNU make is required for the % pattern to work, as is
1687 # a shell that expands alternations within braces. If GNU make is not
1688 # used, this rule will harmlessly fail to match. Used FORCE_PARALLEL to
1689 # prevent serialized checking due to the passed RUNTESTFLAGS.
1690 # FIXME: use config.status --config not --version, when available.
1692 @if [ -f testsuite/config.status ]; then \
1693 rootme=`pwd`; export rootme; \
1694 rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1695 target=`echo "$@" | sed 's,//.*,,'`; \
1696 variant=`echo "$@" | sed 's,^[^/]*//,,'`; \
1697 vardots=`echo "$$variant" | sed 's,/,.,g'`; \
1698 testdir=testsuite.$$vardots; \
1699 if [ ! -f $$testdir/Makefile ] && [ -f testsuite/config.status ]; then \
1700 configargs=`cd testsuite && ./config.status --version | \
1701 sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
1702 $(SHELL) $(srcdir)/../mkinstalldirs $$testdir && \
1704 eval $(SHELL) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
1705 "\"--srcdir=\$$rootsrc/testsuite\"" \
1707 else :; fi && cd $$testdir && \
1708 $(MAKE) $(TARGET_FLAGS_TO_PASS) \
1709 RUNTESTFLAGS="--target_board=$$variant $(RUNTESTFLAGS)" \
1710 FORCE_PARALLEL=$(if $(FORCE_PARALLEL),1,$(if $(RUNTESTFLAGS),,1)) \
1714 # The set of headers checked by 'check-headers' by default.
1715 CHECK_HEADERS = $(HFILES_NO_SRCDIR)
1717 # Try to compile each header in isolation, thus ensuring headers are
1720 # Defaults to checking all $HFILES_NO_SRCDIR headers.
1724 # make check-headers CHECK_HEADERS="header.h list.h"
1726 # to check specific headers.
1729 @echo Checking headers.
1730 for i in $(CHECK_HEADERS) ; do \
1731 $(CXX) $(CXX_DIALECT) -x c++-header -c -fsyntax-only \
1732 $(INTERNAL_CFLAGS) -include defs.h $(srcdir)/$$i ; \
1734 .PHONY: check-headers
1736 info install-info clean-info dvi pdf install-pdf html install-html: force
1737 @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
1739 # Traditionally "install" depends on "all". But it may be useful
1740 # not to; for example, if the user has made some trivial change to a
1741 # source file and doesn't care about rebuilding or just wants to save the
1742 # time it takes for make to check that all is up to date.
1743 # install-only is intended to address that need.
1745 @$(MAKE) $(FLAGS_TO_PASS) install-only
1747 install-only: $(CONFIG_INSTALL)
1748 transformed_name=`t='$(program_transform_name)'; \
1749 echo gdb | sed -e "$$t"` ; \
1750 if test "x$$transformed_name" = x; then \
1751 transformed_name=gdb ; \
1755 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
1756 $(INSTALL_PROGRAM) gdb$(EXEEXT) \
1757 $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1758 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(includedir)/gdb ; \
1759 $(INSTALL_DATA) jit-reader.h $(DESTDIR)$(includedir)/gdb/jit-reader.h
1760 if test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x; \
1762 transformed_name=`t='$(program_transform_name)'; \
1763 echo gcore | sed -e "$$t"` ; \
1764 if test "x$$transformed_name" = x; then \
1765 transformed_name=gcore ; \
1769 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
1770 $(INSTALL_SCRIPT) gcore \
1771 $(DESTDIR)$(bindir)/$$transformed_name; \
1773 transformed_name=`t='$(program_transform_name)'; \
1774 echo gdb-add-index | sed -e "$$t"` ; \
1775 if test "x$$transformed_name" = x; then \
1776 transformed_name=gdb-add-index ; \
1780 $(INSTALL_PROGRAM) $(srcdir)/contrib/gdb-add-index.sh \
1781 $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT)
1782 @$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
1785 $(MAKE) $(FLAGS_TO_PASS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1786 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1787 `test -z '$(STRIP)' || \
1788 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install-only
1791 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(GDB_DATADIR)/guile/gdb
1794 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(GDB_DATADIR)/python/gdb
1796 uninstall: force $(CONFIG_UNINSTALL)
1797 transformed_name=`t='$(program_transform_name)'; \
1798 echo gdb | sed -e $$t` ; \
1799 if test "x$$transformed_name" = x; then \
1800 transformed_name=gdb ; \
1804 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \
1805 $(DESTDIR)$(man1dir)/$$transformed_name.1
1806 if test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x; \
1808 transformed_name=`t='$(program_transform_name)'; \
1809 echo gcore | sed -e "$$t"` ; \
1810 if test "x$$transformed_name" = x; then \
1811 transformed_name=gcore ; \
1815 rm -f $(DESTDIR)$(bindir)/$$transformed_name; \
1817 @$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
1819 # The C++ name parser can be built standalone for testing.
1820 test-cp-name-parser.o: cp-name-parser.c
1821 $(COMPILE) -DTEST_CPNAMES cp-name-parser.c
1824 test-cp-name-parser$(EXEEXT): test-cp-name-parser.o $(LIBIBERTY)
1825 $(CC_LD) $(INTERNAL_LDFLAGS) -o test-cp-name-parser$(EXEEXT) \
1826 test-cp-name-parser.o $(LIBIBERTY)
1828 # We do this by grepping through sources. If that turns out to be too slow,
1829 # maybe we could just require every .o file to have an initialization routine
1830 # of a given name (top.o -> _initialize_top, etc.).
1832 # Formatting conventions: The name of the _initialize_* routines must start
1833 # in column zero, and must not be inside #if.
1835 # Note that the set of files with init functions might change, or the names
1836 # of the functions might change, so this files needs to depend on all the
1837 # object files that will be linked into gdb.
1839 # FIXME: There is a problem with this approach - init.c may force
1840 # unnecessary files to be linked in.
1842 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
1843 # the first call is to _initialize_gdbtypes (implemented by explicitly
1844 # putting that function's name first in the init.l-tmp file). This is
1845 # a hack to ensure that all the architecture dependant global
1846 # builtin_type_* variables are initialized before anything else
1847 # (per-architecture code is called in the same order that it is
1848 # registered). The ``correct fix'' is to have all the builtin types
1849 # made part of the architecture and initialize them on-demand (using
1850 # gdbarch_data) just like everything else. The catch is that other
1851 # modules still take the address of these builtin types forcing them
1852 # to be variables, sigh!
1854 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1855 # anchored on the first column and excludes the ``/'' character so
1856 # that it doesn't add the $(srcdir) prefix to any file that already
1857 # has an absolute path. It turns out that $(DEC)'s True64 make
1858 # automatically adds the $(srcdir) prefixes when it encounters files
1859 # in sub-directories such as cli/ and mi/.
1861 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
1862 # duplicates. Files in the gdb/ directory can end up appearing in
1863 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
1865 INIT_FILES = $(COMMON_OBS) $(TSOBS) $(CONFIG_SRCS) $(SUBDIR_GCC_COMPILE_SRCS)
1866 init.c: $(INIT_FILES)
1868 @rm -f init.c-tmp init.l-tmp
1870 @echo gdbtypes > init.l-tmp
1871 @-LANG=C ; export LANG ; \
1872 LC_ALL=C ; export LC_ALL ; \
1873 echo $(INIT_FILES) | \
1876 -e '/^gdbtypes.[co]$$/d' \
1877 -e '/^init.[co]$$/d' \
1878 -e '/xdr_ld.[co]$$/d' \
1879 -e '/xdr_ptrace.[co]$$/d' \
1880 -e '/xdr_rdb.[co]$$/d' \
1881 -e '/udr.[co]$$/d' \
1882 -e '/udip2soc.[co]$$/d' \
1883 -e '/udi2go32.[co]$$/d' \
1884 -e '/version.[co]$$/d' \
1885 -e '/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1886 -e '/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
1887 -e 's/-exp\.o$$/-exp.y/' \
1888 -e 's/\.[co]$$/.c/' \
1889 -e 's,signals\.c,common/signals\.c,' \
1890 -e 's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
1892 sed -n -e 's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev/null; \
1897 * ) echo $$f ; fs="$$fs $$f";; \
1900 @echo '/* Do not modify this file. */' >>init.c-tmp
1901 @echo '/* It is created automatically by the Makefile. */'>>init.c-tmp
1902 @echo '#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp
1903 @echo 'extern void initialize_all_files(void);' >>init.c-tmp
1904 @sed -e 's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp >>init.c-tmp
1905 @echo 'void' >>init.c-tmp
1906 @echo 'initialize_all_files (void)' >>init.c-tmp
1907 @echo '{' >>init.c-tmp
1908 @sed -e 's/\(.*\)/ _initialize_\1 ();/' <init.l-tmp >>init.c-tmp
1909 @echo '}' >>init.c-tmp
1911 @mv init.c-tmp init.c
1915 # Create a library of the gdb object files and build GDB by linking
1918 # init.o is very important. It pulls in the rest of GDB.
1919 LIBGDB_OBS = $(COMMON_OBS) $(TSOBS) $(ADD_FILES) init.o
1920 libgdb.a: $(LIBGDB_OBS)
1922 $(AR) q libgdb.a $(LIBGDB_OBS)
1925 # Removing the old gdb first works better if it is running, at least on SunOS.
1926 gdb$(EXEEXT): gdb.o $(LIBGDB_OBS) $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
1928 $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1929 -o gdb$(EXEEXT) gdb.o $(LIBGDB_OBS) \
1930 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1932 # Convenience rule to handle recursion.
1933 $(LIBGNU) $(GNULIB_H): all-lib
1934 all-lib: $(GNULIB_BUILDDIR)/Makefile
1935 @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=$(GNULIB_BUILDDIR) subdir_do
1938 # Convenience rule to handle recursion.
1939 .PHONY: all-data-directory
1940 all-data-directory: data-directory/Makefile
1941 @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=data-directory subdir_do
1943 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1944 # on itself without copying the executable. So "make gdb1" will make
1945 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1946 # Removing gdb1 before the copy is the right thing if gdb1 is open
1947 # in another process.
1948 gdb1$(EXEEXT): gdb$(EXEEXT)
1950 cp gdb$(EXEEXT) gdb1$(EXEEXT)
1952 # Put the proper machine-specific files first, so M-. on a machine
1953 # specific routine gets the one for the correct machine. (FIXME: those
1954 # files go in twice; we should be removing them from the main list).
1956 # TAGS depends on all the files that go into it so you can rebuild TAGS
1957 # with `make TAGS' and not have to say `rm TAGS' first.
1959 GDB_NM_FILE = @GDB_NM_FILE@
1960 TAGS: $(TAGFILES_NO_SRCDIR) $(TAGFILES_WITH_SRCDIR)
1962 etags `(test -n "$(GDB_NM_FILE)" && echo "$(srcdir)/$(GDB_NM_FILE)")` \
1963 `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1964 echo $(srcdir)/$$i ; \
1965 done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1967 done) | sed -e 's/\.o$$/\.c/'` \
1968 `find $(srcdir)/config -name '*.h' -print`
1972 clean mostlyclean: $(CONFIG_CLEAN)
1973 @$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(CLEANDIRS)" subdir_do
1974 rm -f *.o *.a $(ADD_FILES) *~ init.c-tmp init.l-tmp version.c-tmp
1975 rm -f init.c version.c observer.h observer.inc
1976 rm -f gdb$(EXEEXT) core make.log
1977 rm -f gdb[0-9]$(EXEEXT)
1978 rm -f test-cp-name-parser$(EXEEXT)
1979 rm -f xml-builtin.c stamp-xml
1981 for i in $(CONFIG_SRC_SUBDIR); do \
1983 rm -f $$i/$(DEPDIR)/*; \
1986 # This used to depend on c-exp.c m2-exp.c TAGS
1987 # I believe this is wrong; the makefile standards for distclean just
1988 # describe removing files; the only sort of "re-create a distribution"
1989 # functionality described is if the distributed files are unmodified.
1990 # NB: While GDBSERVER might be configured on native systems, it isn't
1991 # always included in SUBDIRS. Remove the gdbserver files explicitly.
1993 @$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1994 rm -rf $(GNULIB_BUILDDIR)
1995 rm -f gdbserver/config.status gdbserver/config.log
1996 rm -f gdbserver/tm.h gdbserver/xm.h gdbserver/nm.h
1997 rm -f gdbserver/Makefile gdbserver/config.cache
1998 rm -f nm.h config.status config.h stamp-h gdb-gdb.gdb jit-reader.h
1999 rm -f y.output yacc.acts yacc.tmp y.tab.h
2000 rm -f config.log config.cache
2003 for i in $(CONFIG_SRC_SUBDIR); do \
2004 if test -d $$i/$(DEPDIR); then rmdir $$i/$(DEPDIR); fi \
2007 maintainer-clean: local-maintainer-clean do-maintainer-clean distclean
2008 realclean: maintainer-clean
2010 local-maintainer-clean:
2011 @echo "This command is intended for maintainers to use;"
2012 @echo "it deletes files that may require special tools to rebuild."
2015 ada-lex.c ada-exp.c \
2016 d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c rust-exp.c
2017 rm -f TAGS $(INFOFILES)
2019 rm -f nm.h config.status
2021 do-maintainer-clean:
2022 @$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(CLEANDIRS)" \
2025 diststuff: $(DISTSTUFF) $(PACKAGE).pot $(CATALOGS)
2026 cd doc; $(MAKE) $(MFLAGS) diststuff
2029 @for i in $(DODIRS); do \
2031 $(REQUIRED_SUBDIRS)) \
2032 if [ ! -f ./$$i/Makefile ] ; then \
2033 echo "Missing $$i/Makefile" >&2 ; \
2037 if [ -f ./$$i/Makefile ] ; then \
2039 $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
2040 else exit 1 ; fi ; \
2044 Makefile: Makefile.in config.status
2045 # Regenerate the Makefile and the tm.h / nm.h links.
2046 CONFIG_FILES="Makefile" \
2049 $(SHELL) config.status
2051 $(GNULIB_BUILDDIR)/Makefile: gnulib/Makefile.in config.status
2052 @cd $(GNULIB_BUILDDIR); CONFIG_FILES="Makefile" \
2053 CONFIG_COMMANDS="depfiles" \
2056 $(SHELL) config.status
2058 data-directory/Makefile: data-directory/Makefile.in config.status
2059 CONFIG_FILES="data-directory/Makefile" \
2060 CONFIG_COMMANDS="depfiles" \
2063 $(SHELL) config.status
2067 ./gdb$(EXEEXT) --data-directory=`pwd`/data-directory $(GDBFLAGS)
2069 jit-reader.h: $(srcdir)/jit-reader.in
2070 $(SHELL) config.status $@
2072 gcore: $(srcdir)/gcore.in
2073 $(SHELL) config.status $@
2075 config.h: stamp-h ; @true
2076 stamp-h: $(srcdir)/config.in config.status
2077 CONFIG_HEADERS=config.h:config.in \
2078 CONFIG_COMMANDS="default depdir" \
2081 $(SHELL) config.status
2083 config.status: $(srcdir)/configure configure.tgt configure.host ../bfd/development.sh
2084 $(SHELL) config.status --recheck
2087 ACLOCAL_AMFLAGS = -I ../config
2089 # Keep these in sync with the includes in acinclude.m4.
2092 acx_configure_dir.m4 \
2096 ../config/acinclude.m4 \
2097 ../config/plugins.m4 \
2098 ../config/lead-dot.m4 \
2099 ../config/override.m4 \
2100 ../config/largefile.m4 \
2101 ../config/gettext-sister.m4 \
2102 ../config/lib-ld.m4 \
2103 ../config/lib-prefix.m4 \
2104 ../config/lib-link.m4 \
2107 ../config/depstand.m4 \
2108 ../config/lcmessage.m4 \
2109 ../config/codeset.m4 \
2112 $(srcdir)/aclocal.m4: @MAINTAINER_MODE_TRUE@ $(aclocal_m4_deps)
2113 cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
2116 configure_deps = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
2117 $(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(configure_deps)
2118 cd $(srcdir) && $(AUTOCONF)
2120 AUTOHEADER = autoheader
2121 $(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(configure_deps)
2122 cd $(srcdir) && $(AUTOHEADER)
2126 # automatic rebuilding in automake-generated Makefiles requires
2127 # this rule in the toplevel Makefile, which, with GNU make, causes
2128 # the desired updates through the implicit regeneration of the Makefile
2129 # and all of its prerequisites.
2136 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
2138 cd doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS)
2140 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
2142 cd doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS)
2144 # GDB MANUAL: TeX dvi file
2146 cd doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS)
2148 # GDB MANUAL: info file
2150 cd doc; $(MAKE) gdb.info $(FLAGS_TO_PASS)
2152 # Make copying.c from COPYING
2153 $(srcdir)/copying.c: @MAINTAINER_MODE_TRUE@ $(srcdir)/../COPYING3 $(srcdir)/copying.awk
2154 awk -f $(srcdir)/copying.awk \
2155 < $(srcdir)/../COPYING3 > $(srcdir)/copying.tmp
2156 mv $(srcdir)/copying.tmp $(srcdir)/copying.c
2158 version.c: Makefile version.in $(srcdir)/../bfd/version.h $(srcdir)/common/create-version.sh
2159 $(SHELL) $(srcdir)/common/create-version.sh $(srcdir) \
2160 $(host_alias) $(target_alias) version.c
2162 observer.h: observer.sh doc/observer.texi
2163 ${srcdir}/observer.sh h ${srcdir}/doc/observer.texi observer.h
2165 observer.inc: observer.sh doc/observer.texi
2166 ${srcdir}/observer.sh inc ${srcdir}/doc/observer.texi observer.inc
2169 $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
2170 `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
2172 gdb.cxref: $(SFILES)
2173 cxref -I. $(SFILES) >gdb.cxref
2177 # GNU Make has an annoying habit of putting *all* the Makefile variables
2178 # into the environment, unless you include this target as a circumvention.
2179 # Rumor is that this will be fixed (and this target can be removed)
2183 # GNU Make 3.63 has a different problem: it keeps tacking command line
2184 # overrides onto the definition of $(MAKE). This variable setting
2189 aarch64-fbsd-nat.c \
2190 aarch64-fbsd-tdep.c \
2191 aarch64-linux-nat.c \
2192 aarch64-linux-tdep.c \
2193 aarch64-newlib-tdep.c \
2199 alpha-linux-tdep.c \
2200 alpha-mdebug-tdep.c \
2205 amd64-darwin-tdep.c \
2206 amd64-dicos-tdep.c \
2210 amd64-linux-tdep.c \
2223 arm-get-next-pcs.c \
2230 arm-symbian-tdep.c \
2257 i386-cygwin-tdep.c \
2259 i386-darwin-tdep.c \
2276 ia64-libunwind-tdep.c \
2297 microblaze-linux-tdep.c \
2309 mips64-obsd-tdep.c \
2314 nios2-linux-tdep.c \
2327 ppc-ravenscar-thread.c \
2331 ravenscar-thread.c \
2334 rs6000-lynx178-tdep.c \
2354 sparc-linux-tdep.c \
2359 sparc-ravenscar-thread.c \
2363 sparc64-fbsd-nat.c \
2364 sparc64-fbsd-tdep.c \
2365 sparc64-linux-nat.c \
2366 sparc64-linux-tdep.c \
2368 sparc64-nbsd-nat.c \
2369 sparc64-nbsd-tdep.c \
2370 sparc64-obsd-nat.c \
2371 sparc64-obsd-tdep.c \
2372 sparc64-sol2-tdep.c \
2377 tilegx-linux-nat.c \
2378 tilegx-linux-tdep.c \
2390 xtensa-linux-nat.c \
2391 xtensa-linux-tdep.c \
2394 common/mingw-strerror.c \
2395 common/posix-strerror.c
2397 # Some files need explicit build rules (due to -Werror problems) or due
2398 # to sub-directory fun 'n' games.
2400 # Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually
2401 # checks format strings.
2402 printcmd.o: $(srcdir)/printcmd.c
2403 $(COMPILE.pre) $(INTERNAL_CFLAGS) $(GDB_WARN_CFLAGS_NO_FORMAT) \
2404 $(COMPILE.post) $(srcdir)/printcmd.c
2407 # Same for "target-float.c".
2408 target-float.o: $(srcdir)/target-float.c
2409 $(COMPILE.pre) $(INTERNAL_CFLAGS) $(GDB_WARN_CFLAGS_NO_FORMAT) \
2410 $(COMPILE.post) $(srcdir)/target-float.c
2412 # ada-exp.c can appear in srcdir, for releases; or in ., for
2413 # development builds.
2414 ADA_EXP_C = `if test -f ada-exp.c; then echo ada-exp.c; else echo $(srcdir)/ada-exp.c; fi`
2416 # Some versions of flex give output that triggers
2417 # -Wold-style-definition.
2418 ada-exp.o: ada-exp.c
2419 $(COMPILE.pre) $(INTERNAL_CFLAGS) $(GDB_WARN_CFLAGS_NO_DEFS) \
2420 $(COMPILE.post) $(ADA_EXP_C)
2423 # Message files. Based on code in gcc/Makefile.in.
2425 # Rules for generating translated message descriptions. Disabled by
2426 # autoconf if the tools are not available.
2428 .PHONY: all-po install-po uninstall-po clean-po update-po $(PACKAGE).pot
2432 # This notation should be acceptable to all Make implementations used
2433 # by people who are interested in updating .po files.
2434 update-po: $(CATALOGS:.gmo=.pox)
2436 # N.B. We do not attempt to copy these into $(srcdir). The snapshot
2439 -test -d po || mkdir po
2440 $(GMSGFMT) --statistics -o $@ $<
2442 # The new .po has to be gone over by hand, so we deposit it into
2443 # build/po with a different extension. If build/po/$(PACKAGE).pot
2444 # exists, use it (it was just created), else use the one in srcdir.
2446 -test -d po || mkdir po
2447 $(MSGMERGE) $< `if test -f po/$(PACKAGE).pot; \
2448 then echo po/$(PACKAGE).pot; \
2449 else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o $@
2451 # This rule has to look for .gmo modules in both srcdir and the cwd,
2452 # and has to check that we actually have a catalog for each language,
2453 # in case they weren't built or included with the distribution.
2455 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(datadir)
2456 cats="$(CATALOGS)"; for cat in $$cats; do \
2457 lang=`basename $$cat | sed 's/\.gmo$$//'`; \
2458 if [ -f $$cat ]; then :; \
2459 elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
2462 dir=$(localedir)/$$lang/LC_MESSAGES; \
2463 echo $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir; \
2464 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir || exit 1; \
2465 echo $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
2466 $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
2469 cats="$(CATALOGS)"; for cat in $$cats; do \
2470 lang=`basename $$cat | sed 's/\.gmo$$//'`; \
2471 if [ -f $$cat ]; then :; \
2472 elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
2475 dir=$(localedir)/$$lang/LC_MESSAGES; \
2476 rm -f $(DESTDIR)$$dir/$(PACKAGE).mo; \
2478 # Delete po/*.gmo only if we are not building in the source directory.
2480 -if [ ! -f Makefile.in ]; then rm -f po/*.gmo; fi
2482 # Rule for regenerating the message template (gdb.pot). Instead of
2483 # forcing everyone to edit POTFILES.in, which proved impractical, this
2484 # rule has no dependencies and always regenerates gdb.pot. This is
2485 # relatively harmless since the .po files do not directly depend on
2486 # it. The .pot file is left in the build directory. Since GDB's
2487 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
2488 # files) force this rule.
2489 $(PACKAGE).pot: po/$(PACKAGE).pot
2490 po/$(PACKAGE).pot: force
2491 -test -d po || mkdir po
2492 sh -e $(srcdir)/po/gdbtext $(XGETTEXT) $(PACKAGE) . $(srcdir)
2496 # YACC/LEX dependencies
2498 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
2499 # exist in srcdir, then compiled in objdir to LANG-exp.o. If we
2500 # said LANG-exp.c rather than ./c-exp.c some makes would
2501 # sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
2502 # decls for malloc/realloc/free which conflict with everything else.
2503 # Strictly speaking c-exp.c should therefore depend on
2504 # Makefile.in, but that was a pretty big annoyance.
2508 $(SHELL) $(YLWRAP) $< y.tab.c $@ -- $(YACC) $(YFLAGS) && mv $@ $@.tmp \
2509 || (rm -f $@; false)
2510 sed -e '/extern.*malloc/d' \
2511 -e '/extern.*realloc/d' \
2512 -e '/extern.*free/d' \
2513 -e '/include.*malloc.h/d' \
2514 -e 's/\([^x]\)malloc/\1xmalloc/g' \
2515 -e 's/\([^x]\)realloc/\1xrealloc/g' \
2516 -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
2517 -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
2518 -e '/^#line.*y.tab.c/d' \
2519 -e 's/YY_NULL/YY_NULLPTR/g' \
2523 if [ "$(FLEX)" ] && $(FLEX) --version >/dev/null 2>&1; then \
2524 $(FLEX) -o$@ $< && \
2526 sed -e '/extern.*malloc/d' \
2527 -e '/extern.*realloc/d' \
2528 -e '/extern.*free/d' \
2529 -e '/include.*malloc.h/d' \
2530 -e 's/\([^x]\)malloc/\1xmalloc/g' \
2531 -e 's/\([^x]\)realloc/\1xrealloc/g' \
2532 -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
2533 -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
2534 -e 's/yy_flex_xrealloc/yyxrealloc/g' \
2538 elif [ -f $@ ]; then \
2539 echo "Warning: $*.c older than $*.l and flex not available."; \
2541 echo "$@ missing and flex not available."; \
2545 .PRECIOUS: ada-lex.c
2549 xml-builtin.c: stamp-xml; @true
2550 stamp-xml: $(srcdir)/features/feature_to_c.sh Makefile $(XMLFILES)
2551 rm -f xml-builtin.tmp
2553 $(SHELL) $(srcdir)/features/feature_to_c.sh \
2554 xml-builtin.tmp $(XMLFILES)
2555 $(SHELL) $(srcdir)/../move-if-change xml-builtin.tmp xml-builtin.c
2556 echo stamp > stamp-xml
2558 .PRECIOUS: xml-builtin.c
2561 # GDBTK sub-directory
2564 all-gdbtk: insight$(EXEEXT)
2567 transformed_name=`t='$(program_transform_name)'; \
2568 echo insight | sed -e $$t` ; \
2569 if test "x$$transformed_name" = x; then \
2570 transformed_name=insight ; \
2574 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir); \
2575 $(INSTALL_PROGRAM) insight$(EXEEXT) \
2576 $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
2577 $(SHELL) $(srcdir)/../mkinstalldirs \
2578 $(DESTDIR)$(GDBTK_LIBRARY) ; \
2579 $(SHELL) $(srcdir)/../mkinstalldirs \
2580 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION) ; \
2581 $(INSTALL_DATA) $(srcdir)/gdbtk/plugins/plugins.tcl \
2582 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION)/plugins.tcl ; \
2583 $(SHELL) $(srcdir)/../mkinstalldirs \
2584 $(DESTDIR)$(GDBTK_LIBRARY)/images \
2585 $(DESTDIR)$(GDBTK_LIBRARY)/images2 ; \
2586 $(SHELL) $(srcdir)/../mkinstalldirs \
2587 $(DESTDIR)$(GDBTK_LIBRARY)/help \
2588 $(DESTDIR)$(GDBTK_LIBRARY)/help/images \
2589 $(DESTDIR)$(GDBTK_LIBRARY)/help/trace ; \
2590 cd $(srcdir)/gdbtk/library ; \
2591 for i in *.tcl *.itcl *.ith *.itb images/*.gif images2/*.gif images/icons.txt images2/icons.txt tclIndex help/*.html help/trace/*.html help/trace/index.toc help/images/*.gif help/images/*.png; \
2593 $(INSTALL_DATA) $$i $(DESTDIR)$(GDBTK_LIBRARY)/$$i ; \
2597 transformed_name=`t='$(program_transform_name)'; \
2598 echo insight | sed -e $$t` ; \
2599 if test "x$$transformed_name" = x; then \
2600 transformed_name=insight ; \
2604 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
2605 rm -rf $(DESTDIR)$(GDBTK_LIBRARY)
2608 rm -f insight$(EXEEXT)
2610 # Removing the old gdb first works better if it is running, at least on SunOS.
2611 insight$(EXEEXT): gdbtk-main.o libgdb.a $(ADD_DEPS) \
2612 $(CDEPS) $(TDEPLIBS)
2613 rm -f insight$(EXEEXT)
2614 $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
2615 -o insight$(EXEEXT) gdbtk-main.o libgdb.a \
2616 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
2618 gdbres.o: $(srcdir)/gdbtk/gdb.rc $(srcdir)/gdbtk/gdbtool.ico
2619 $(WINDRES) --include $(srcdir)/gdbtk $(srcdir)/gdbtk/gdb.rc gdbres.o
2621 all_gdbtk_cflags = $(IDE_CFLAGS) $(ITCL_CFLAGS) \
2622 $(ITK_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
2624 -DGDBTK_LIBRARY=\"$(GDBTK_LIBRARY)\" \
2625 -DSRC_DIR=\"$(GDBTK_SRC_DIR)\"
2628 # Dependency tracking.
2631 ifeq ($(DEPMODE),depmode=gcc3)
2632 # Note that we put the dependencies into a .Tpo file, then move them
2633 # into place if the compile succeeds. We need this because gcc does
2634 # not atomically write the dependency output file.
2635 override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
2636 -MF $(@D)/$(DEPDIR)/$(basename $(@F)).Tpo
2637 override POSTCOMPILE = @mv $(@D)/$(DEPDIR)/$(basename $(@F)).Tpo \
2638 $(@D)/$(DEPDIR)/$(basename $(@F)).Po
2640 override COMPILE.pre = source='$<' object='$@' libtool=no \
2641 DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) \
2642 $(CXX) -x c++ $(CXX_DIALECT)
2643 # depcomp handles atomicity for us, so we don't need a postcompile
2645 override POSTCOMPILE =
2648 # A list of all the objects we might care about in this build, for
2649 # dependency tracking.
2650 all_object_files = gdb.o $(LIBGDB_OBS) gdbtk-main.o \
2651 test-cp-name-parser.o
2653 # All the .deps files to include.
2654 all_deps_files = $(foreach dep,$(patsubst %.o,%.Po,$(all_object_files)),\
2655 $(dir $(dep))/$(DEPDIR)/$(notdir $(dep)))
2657 # Ensure that generated files are created early. Use order-only
2658 # dependencies if available. They require GNU make 3.80 or newer,
2659 # and the .VARIABLES variable was introduced at the same time.
2661 $(all_object_files): | $(generated_files)
2663 $(all_object_files) : $(generated_files)
2667 -include $(all_deps_files)
2669 # Disable implicit make rules.
2670 include $(srcdir)/disable-implicit-rules.mk
2672 ### end of the gdb Makefile.in.