gdb/ChangeLog

   1 2011-01-25  Pedro Alves  <pedro@codesourcery.com>
   2
   3         Stop remote_read_bytes from handling partial reads itself.
   4
   5         * remote-fileio.c: Include target.h.
   6         (remote_fileio_write_bytes): Delete.
   7         (remote_fileio_func_open, remote_fileio_func_write)
   8         (remote_fileio_func_rename, remote_fileio_func_unlink): Use
   9         target_read_memory.
  10         (remote_fileio_func_stat): Use target_read_memory and
  11         target_write_memory.
  12         (remote_fileio_func_gettimeofday): Use target_write_memory.
  13         (remote_fileio_func_system): Use target_read_memory.
  14         * remote.c (remote_write_bytes): Make it static.
  15         (remote_read_bytes): Don't handle partial reads here.
  16         * remote.h (remote_read_bytes): Delete declaration.
  17
  18 2011-01-25  Pedro Alves  <pedro@codesourcery.com>
  19
  20         Simplify XML parsing a bit.
  21
  22         * xml-support.h (gdb_xml_parse_quick): Declare.
  23         * xml-support.c (gdb_xml_create_parser_and_cleanup_1): Renamed
  24         from gdb_xml_create_parser_and_cleanup, and added `old_chain'
  25         parameter.
  26         (gdb_xml_create_parser_and_cleanup): Reimplement on top of
  27         gdb_xml_create_parser_and_cleanup_1.
  28         (gdb_xml_parse_quick): New.
  29         * memory-map.c (parse_memory_map): Use gdb_xml_parse_quick.
  30         * osdata.c (osdata_parse): Ditto.
  31         * remote.c (remote_threads_info): Ditto.
  32         * solib-target.c (solib_target_parse_libraries): Ditto.
  33         * xml-syscall.c (syscall_parse_xml): Ditto.
  34         * xml-tdesc.c (tdesc_parse_xml): Ditto.
  35
  36 2011-01-24  Kevin Buettner  <kevinb@redhat.com>
  37
  38         * configure.tgt (mips*-*-elf): New; just like mips*-*-*, but
  39         with remote-mips.o added to gdb_target_obs.
  40         * Makefile.in (ALL_TARGET_OBS): Add remote-mips.o.
  41
  42 2011-01-24  Pedro Alves  <pedro@codesourcery.com>
  43
  44         * ada-valprint.c (val_print_packed_array_elements): Pass the
  45         correct struct value to val_print.
  46         (ada_val_print_1): Ditto.
  47
  48 2011-01-24  Pedro Alves  <pedro@codesourcery.com>
  49
  50         Don't lose embedded_offset in printing routines throughout.
  51
  52         * valprint.h (val_print_array_elements): Change prototype.
  53         * valprint.c (val_print_array_elements): Add `embedded_offset'
  54         parameter, and adjust to pass it down to val_print, while passing
  55         `valaddr' or `address' unmodified.  Take embedded_offset into
  56         account when checking repetitions.
  57         * c-valprint.c (c_val_print): Pass embedded_offset to
  58         val_print_array_elements instead of adjusting `valaddr' and
  59         `address'.
  60         * m2-valprint.c (m2_print_array_contents, m2_val_print): Pass
  61         embedded_offset to val_print_array_elements instead of adjusting
  62         `valaddr'.
  63         * p-lang.h (pascal_object_print_value_fields): Adjust prototype.
  64         * p-valprint.c (pascal_val_print): Pass embedded_offset to
  65         val_print_array_elements and pascal_object_print_value_fields
  66         instead of adjusting `valaddr'.
  67         (pascal_object_print_value_fields): Add `offset' parameter, and
  68         adjust to use it.
  69         (pascal_object_print_value): Add `offset' parameter, and adjust to
  70         use it.
  71         (pascal_object_print_static_field): Use
  72         value_contents_for_printing/value_embedded_offset, rather than
  73         value_contents.
  74         * ada-valprint.c (val_print_packed_array_elements): Add `offset'
  75         parameter, and adjust to use it.  Use
  76         value_contents_for_printing/value_embedded_offset, rather than
  77         value_contents.
  78         (ada_val_print): Rename `valaddr0' parameter to `valaddr'.
  79         (ada_val_print_array): Add `offset' parameter, and adjust to use
  80         it.
  81         (ada_val_print_1): Rename `valaddr0' parameter to `valaddr', and
  82         `embedded_offset' to `offset'.  Don't re-adjust `valaddr'.
  83         Instead work with offsets.  Use
  84         value_contents_for_printing/value_embedded_offset, rather than
  85         value_contents.  Change `defer_val_int' local type to CORE_ADDR,
  86         and use value_from_pointer to extract a target pointer, rather
  87         than value_from_longest.
  88         (print_variant_part): Add `offset' parameter.  Replace
  89         `outer_valaddr' parameter by a new `outer_offset' parameter.
  90         Don't re-adjust `valaddr'.  Instead pass down adjusted offsets.
  91         (ada_value_print): Use
  92         value_contents_for_printing/value_embedded_offset, rather than
  93         value_contents.
  94         (print_record): Add `offset' parameter, and adjust to pass it
  95         down.
  96         (print_field_values): Add `offset' parameter.  Replace
  97         `outer_valaddr' parameter by a new `outer_offset' parameter.
  98         Don't re-adjust `valaddr'.  Instead pass down adjusted offsets.
  99         Use value_contents_for_printing/value_embedded_offset, rather than
 100         value_contents.
 101         * d-valprint.c (dynamic_array_type): Use
 102         value_contents_for_printing/value_embedded_offset, rather than
 103         value_contents.
 104         * jv-valprint.c (java_print_value_fields): Add `offset' parameter.
 105         Don't re-adjust `valaddr'.  Instead pass down adjusted offsets.
 106         (java_print_value_fields): Take `offset' into account.  Don't
 107         re-adjust `valaddr'.  Instead pass down adjusted offsets.
 108         (java_val_print): Take `embedded_offset' into account.  Pass it to
 109         java_print_value_fields.
 110         * f-valprint.c (f77_print_array_1): Add `embedded_offset'
 111         parameter.  Don't re-adjust `valaddr' or `address'.  Instead pass
 112         down adjusted offsets.
 113         (f77_print_array): Add `embedded_offset' parameter.  Pass it down.
 114         (f_val_print): Take `embedded_offset' into account.
 115
 116 2011-01-21  Joel Brobecker  <brobecker@adacore.com>
 117
 118         * inflow.c: Include "gdbcmd.h".
 119         (interactive_mode): New static global, moved here from top.c.
 120         (show_interactive_mode): New function, moved here from top.c.
 121         use gdb_has_a_terminal instead of input_from_terminal_p to
 122         determine the current mode.
 123         (gdb_has_a_terminal): Add handling of the "iteractive-mode"
 124         setting.
 125         (_initialize_inflow): Add the "set/show interactive-mode"
 126         commands.  Moved here from top.c, after having adjusted slightly
 127         the help text.
 128         * top.c (interactive_mode, show_interactive_mode): Delete, moved
 129         to inflow.c.
 130         (input_from_terminal_p): Remove handling of "interactive-mode"
 131         setting, moved to infow.c.
 132         (init_main): Remove creation of the "set/show interactive-mode"
 133         commands, moved to inflow.c.
 134
 135 2011-01-19  Joel Brobecker  <brobecker@adacore.com>
 136
 137         * NEWS: Add entry for native ia64-hpux support.
 138
 139 2011-01-19  Tom Tromey  <tromey@redhat.com>
 140
 141         PR mi/8618:
 142         * thread.c (free_thread): Free 'name'.
 143         (print_thread_info): Emit thread name.  Change CLI output.
 144         (thread_name_command): New function.
 145         (do_captured_thread_select): Emit newline.
 146         (_initialize_thread): Register 'thread name' command.
 147         * target.h (struct target_ops) <to_thread_name>: New field.
 148         (target_thread_name): New macro.
 149         * target.c (update_current_target): Handle to_thread_name.
 150         * python/py-infthread.c (thpy_get_name): New function.
 151         (thpy_set_name): Likewise.
 152         (thread_object_getset): Add "name".
 153         * linux-nat.c (linux_nat_thread_name): New function.
 154         (linux_nat_add_target): Set to_thread_name.
 155         * gdbthread.h (struct thread_info) <name>: New field.
 156
 157 2011-01-18  Joel Brobecker  <brobecker@adacore.com>
 158
 159         * ada-valprint.c (ada_print_scalar): Remove unsigned char downcast.
 160         (ada_val_print_1): Likewise.
 161
 162 2011-01-18  Joel Brobecker  <brobecker@adacore.com>
 163
 164         * rs6000-tdep.c (rs6000_skip_prologue): Make sure that the prologue
 165         upper limit address is not greater than the function end address
 166         when the upper limit could not be computed using the debugging
 167         info.
 168
 169 2011-01-17  Tom Tromey  <tromey@redhat.com>
 170
 171         * cli/cli-cmds.c (apropos_command): Free the compiled regex.  Use
 172         get_regcomp_error.
 173         * utils.c: Include gdb_regex.h.
 174         (do_regfree_cleanup): New function.
 175         (make_regfree_cleanup): Likewise.
 176         (get_regcomp_error): Likewise.
 177         * gdb_regex.h (make_regfree_cleanup, get_regcomp_error): Declare.
 178
 179 2011-01-17  Tom Tromey  <tromey@redhat.com>
 180
 181         * cli/cli-cmds.c (apropos_command): Fix formatting.  Don't call
 182         re_compile_fastmap.
 183
 184 2011-01-17  Pierre Muller  <muller@ics.u-strasbg.fr>
 185
 186         * p-exp.y (intvar): New static variable, used to set CURRENT_TYPE
 187         for internal variables.
 188         (last_was_structop): New static variable.
 189         (COMPLETE): New token.
 190         (field_exp): New rule to group all '.' suffix handling.
 191         Add mark_struct_expression calls when approriate to be able
 192         to correctly find fields for completion.
 193         (yylex): Adapt to handle field completion and set INTVAR when
 194         required.
 195
 196 2011-01-14  Yao Qi  <yao@codesourcery.com>
 197
 198         * arm-tdep.c (arm_register_reggroup_p): FPS register is in
 199         save_reggroup, restore_reggroup and all_reggroup.
 200
 201 2011-01-14  Joel Brobecker  <brobecker@adacore.com>
 202
 203         * ada-valprint. (ada_printchar): Use the correct type length
 204         in call to ada_emit_char.
 205         * c-valprint.c (c_val_print): Remove cast in call to LA_PRINT_CHAR.
 206
 207 2011-01-14  Pierre Muller  <muller@ics.u-strasbg.fr>
 208
 209         * solib-som.h (hpux_major_release): Declare variable here.
 210         * solib-som.c:  Remove <sys/utsname.h> header.
 211         (DEFAULT_HPUX_MAJOR_RELEASE): New macro.
 212         (hpux_major_release): Make global, change default value to
 213         DEFAULT_HPUX_MAJOR_RELEASE.
 214         (get_hpux_major_release): Simply return HPUX_MAJOR_RELEASE.
 215         * hppa-hpux-nat.c: Add <sys/utsname.h> include.
 216         Add "solib-som.h" header.
 217         (set_hpux_major_release): New function.
 218         (_initialize_hppa_hpux_nat): Call set_hpux_major_release.
 219
 220 2011-01-14  Mike Frysinger  <vapier@gentoo.org>
 221
 222         * configure.tgt (*-*-uclinux*): Match more Linux os targets
 223
 224 2011-01-14  Joel Brobecker  <brobecker@adacore.com>
 225
 226         * ia64-hpux-nat.c (ia64_hpux_fetch_register): Remove trailing
 227         new-line at end of warning message.
 228         (ia64_hpux_store_register): Remove trailing new-line at end of
 229         error message.
 230         * ia64-hpux-tdep.c: Rephrase comment.
 231         * solib-ia64-hpux.c (struct dld_info): Change type of field
 232         dld_flags from "long long" to ULONGEST.
 233
 234 2011-01-14  Pedro Alves  <pedro@codesourcery.com>
 235
 236         * target.h (deprecated_child_ops): Delete declaration.
 237         * target.c (deprecated_child_ops): Delete definition.
 238
 239 2011-01-14  Pedro Alves  <pedro@codesourcery.com>
 240
 241         * Makefile.in (hpux-thread.o): Delete rule.
 242         * configure.ac: Don't check for HPUX DCE threads support.
 243         * configure, config.in: Regenerate.
 244         * hppa-hpux-nat.c (child_suppress_run): Delete.
 245         (hppa_hpux_child_can_run): Delete.
 246         (_initialize_hppa_hpux_nat): Don't override to_can_run.
 247         * hpux-thread.c: Delete.
 248
 249 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 250
 251         * hpux-thread.c (hpux_pid_to_str): Delete.
 252
 253 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 254
 255         * ada-valprint.c (ada_emit_char): Remove strange code.
 256         Check that c is <= UCHAR_MAX before passing it to isascii.
 257         (char_at): Do not assume that TYPE_LEN is either 1 or 2.
 258
 259 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 260
 261         * top.c (input_from_terminal_p): Restrict the use of interactive_mode
 262         to the case where instream is stdin.
 263
 264 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 265
 266         * ia64-tdep.h (struct regcache): Forward declare.
 267         (struct ia64_infcall_ops): New struct type.
 268         (struct gdbarch_tdep): New fields "find_global_pointer_from_solib"
 269         and "infcall_ops".
 270         * ia64-tdep.c (ia64_find_global_pointer_from_dynamic_section):
 271         Renames ia64_find_global_pointer.
 272         (ia64_find_global_pointer, ia64_allocate_new_rse_frame)
 273         (ia64_store_argument_in_slot, ia64_set_function_addr: New function.
 274         (ia64_push_dummy_call): Adjust to use the new tdep ia64_infocall_ops
 275         methods.
 276         (ia64_infcall_ops): New static global constant.
 277         (ia64_gdbarch_init): Set tdep->infcall_ops.
 278         * ia64-hpux-nat.c (ia64_hpux_xfer_solib_got): New function.
 279         (ia64_hpux_xfer_partial): Add TARGET_OBJECT_HPUX_SOLIB_GOT handing.
 280         * ia64-hpux-tdep.c: Include "regcache.h", "gdbcore.h" and "inferior.h".
 281         (ia64_hpux_dummy_code): New static global constant.
 282         (ia64_hpux_push_dummy_code, ia64_hpux_allocate_new_rse_frame)
 283         (ia64_hpux_store_argument_in_slot, ia64_hpux_set_function_addr)
 284         (ia64_hpux_dummy_id, ia64_hpux_find_global_pointer_from_solib):
 285         New function.
 286         (ia64_hpux_infcall_ops): New static global constant.
 287         (ia64_hpux_init_abi): Install gdbarch and tdep methods needed
 288         for inferior function calls to work properly on ia64-hpux.
 289
 290 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 291
 292         * target.h (enum target_object): Add TARGET_OBJECT_HPUX_UREGS.
 293         * ia64-tdep.h (struct frame_info): forward declaration.
 294         (struct gdbarch_tdep): Add field size_of_register_frame.
 295         * ia64-tdep.c (ia64_access_reg): Use tdep->size_of_register_frame
 296         to determine the size of the register frame.
 297         (ia64_size_of_register_frame): New function.
 298         (ia64_gdbarch_init): Set tdep->size_of_register_frame.
 299         * ia64-hpux-tdep.c: Include "target.h" and "frame.h".
 300         (IA64_HPUX_UREG_REASON): New macro.
 301         (ia64_hpux_stopped_in_syscall, ia64_hpux_size_of_register_frame):
 302         New functions.
 303         (ia64_hpux_init_abi): Set tdep->size_of_register_frame.
 304         * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): New function.
 305         (ia64_hpux_xfer_partial): Add handling of TARGET_OBJECT_HPUX_UREGS
 306         objects.
 307
 308 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 309
 310         Add support for ia64-hpux.
 311         * config/ia64/hpux.mh, ia64-hpux-nat.c, ia64-hpux-tdep.c,
 312         ia64-hpux-tdep.h, solib-ia64-hpux.c, solib-ia64-hpux.h: New files.
 313
 314         * configure.host: Add handling for ia64-hpux hosts.  Add associated
 315         floatformats.
 316         * configure.tgt: Add handling for ia64-hpux targets.
 317         * Makefile.in (ALL_64_TARGET_OBS): Add ia64-hpux-tdep.o.
 318         (HFILES_NO_SRCDIR): Add ia64-hpux-tdep.h.
 319         (ALLDEPFILES): Add ia64-hpux-nat.c ia64-hpux-tdep.c.
 320
 321 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 322
 323         [ttrace] Compute thread list immediately after attach.
 324         * inf_ttrace_attach (inf_ttrace_create_threads_after_attach):
 325         New subprogram.
 326         (inf_ttrace_attach): Use it.
 327
 328 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 329
 330         * libunwind-frame.c (libunwind_frame_cache): Do not return NULL
 331         if we could not determine the frame's function address.  Instead,
 332         use the frame's PC, and then continue.
 333
 334 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 335
 336         * libunwind-frame.c (__LITTLE_ENDIAN, __BIG_ENDIAN): Define if
 337         not already defined.
 338
 339 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 340
 341         * ia64-tdep.c (ia64_struct_type_p): New function.
 342         (ia64_extract_return_value): Handle integral values that are
 343         less than 8 bytes long.
 344         (ia64_push_dummy_call): Likewise.
 345
 346 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 347
 348         * ia64-tdep.c (floatformat_ia64_ext_little): Renames
 349         floatformat_ia64_ext.
 350         (floatformat_ia64_ext_big): New static const.
 351         (floatformats_ia64_ext): Set first entry to &floatformat_ia64_ext_big.
 352
 353 2011-01-12  Tom Tromey  <tromey@redhat.com>
 354
 355         * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Fix error
 356         messages.
 357         * mi/mi-main.c (mi_cmd_thread_select): Fix error messages.
 358         (mi_cmd_thread_list_ids): Likewise.
 359         (mi_cmd_data_list_changed_registers): Likewise.
 360         (mi_cmd_data_list_register_values): Likewise.
 361         (mi_cmd_data_write_register_values): Likewise.
 362         (mi_cmd_data_evaluate_expression): Likewise.
 363         (mi_cmd_data_read_memory): Likewise.
 364         (mi_cmd_data_read_memory_bytes): Likewise.
 365         (mi_cmd_data_write_memory): Likewise.
 366         (mi_cmd_enable_timings): Likewise.
 367         * mi/mi-interp.c (mi_cmd_interpreter_exec): Fix error messages.
 368         * mi/mi-cmd-var.c (mi_cmd_var_create): Fix error messages.
 369         (mi_cmd_var_delete): Likewise.
 370         (mi_cmd_var_set_format): Likewise.
 371         (mi_cmd_var_show_format): Likewise.
 372         (mi_cmd_var_info_num_children): Likewise.
 373         (mi_cmd_var_list_children): Likewise.
 374         (mi_cmd_var_info_type): Likewise.
 375         (mi_cmd_var_info_expression): Likewise.
 376         (mi_cmd_var_show_attributes): Likewise.
 377         (mi_cmd_var_assign): Likewise.
 378         (mi_cmd_var_update): Likewise.
 379         (mi_cmd_enable_pretty_printing): Likewise.
 380         (mi_cmd_var_set_update_range): Likewise.
 381         * mi/mi-cmd-target.c (mi_cmd_target_file_get): Fix error
 382         messages.
 383         (mi_cmd_target_file_put): Likewise.
 384         (mi_cmd_target_file_delete): Likewise.
 385         * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Fix error
 386         messages.
 387         (mi_cmd_stack_info_depth): Likewise.
 388         (mi_cmd_stack_list_locals): Likewise.
 389         (mi_cmd_stack_list_args): Likewise.
 390         (mi_cmd_stack_select_frame): Likewise.
 391         (mi_cmd_stack_select_frame): Likewise.
 392         (mi_cmd_stack_info_frame): Likewise.
 393         * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Fix error
 394         messages.
 395         (mi_cmd_file_list_exec_source_files): Likewise.
 396         * mi/mi-cmd-env.c (mi_cmd_env_pwd): Fix error messages.
 397         (mi_cmd_env_cd): Likewise.
 398         (mi_cmd_env_path): Likewise.
 399         (mi_cmd_env_dir): Likewise.
 400         (mi_cmd_inferior_tty_show): Likewise.
 401         * mi/mi-cmd-disas.c (mi_cmd_disassemble): Fix error messages.
 402         * mi/mi-cmd-break.c (mi_cmd_break_insert): Fix error messages.
 403         (mi_cmd_break_watch): Likewise.
 404
 405 2011-01-12  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 406
 407         * ppc-linux-nat.c (booke_cmp_hw_point): Fix whitespace.
 408         (ppc_linux_insert_hw_breakpoint): Likewise.
 409         (ppc_linux_remove_hw_breakpoint): Likewise.
 410         (ppc_linux_insert_watchpoint): Likewise.
 411
 412 2011-01-12  Andrew Burgess  <aburgess@broadcom.com>
 413             Jan Kratochvil  <jan.kratochvil@redhat.com>
 414
 415         PR fortran/11104 and DWARF unbound arrays detection.
 416         * dwarf2read.c (read_subrange_type): Set zero length on unspecified
 417         upper bound.  Set TYPE_HIGH_BOUND_UNDEFINED if not language_ada on
 418         unspecified upper bound.
 419         * eval.c (evaluate_subexp_standard) <multi_f77_subscript>: Remove
 420         variables array_size_array, tmp_type and offset_item.  New variable
 421         array.  Remove call to f77_get_upperbound.  New variables array_type
 422         and index.  Call value_subscripted_rvalue for each dimenasion.  Remove
 423         the final call to deprecated_set_value_type.
 424
 425 2011-01-12  Jan Kratochvil  <jan.kratochvil@redhat.com>
 426
 427         Make value allocations more lazy.
 428         * ada-lang.c (coerce_unspec_val_to_type): Use allocate_value_lazy
 429         instead of allocate_value and set_value_lazy when possible.
 430         * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use allocate_value_lazy
 431         instead of allocate_value and set_value_lazy.
 432         * findvar.c (value_of_register_lazy): Likewise.
 433         (read_var_value): Remove V preallocation, call just check_typedef in
 434         advance.  Move allocate_value to LOC_CONST, LOC_LABEL,
 435         LOC_CONST_BYTES.  Use allocate_value_lazy in LOC_STATIC, LOC_ARG,
 436         LOC_REF_ARG, LOC_LOCAL, LOC_BLOCK.  Set ADDR instead of
 437         set_value_address and break in LOC_BLOCK.  Use allocate_value_lazy and
 438         remove lval_memory set in LOC_REGPARM_ADDR.  Use allocate_value_lazy
 439         in LOC_UNRESOLVED and LOC_OPTIMIZED_OUT.  Add setting lval_memory at
 440         the end, remove set_value_lazy there.
 441         * valarith.c (value_subscripted_rvalue): Use allocate_value_lazy
 442         instead of allocate_value and set_value_lazy when possible.
 443         * valops.c (value_fetch_lazy): Do nop for value_optimized_out VAL.
 444         * value.c (allocate_computed_value): Use allocate_value_lazy instead
 445         of allocate_value and set_value_lazy.
 446         (value_from_contents_and_address): Use allocate_value_lazy instead of
 447         allocate_value and set_value_lazy when possible.
 448
 449 2011-01-12  Andrew Burgess  <aburgess@broadcom.com>
 450
 451         * disasm.c (dump_insns): Support dumping opcodes for MI.
 452         * mi/mi-cmd-disas.c (mi_cmd_disassemble): Allow mode to control
 453         dumping of instruction opcodes.
 454
 455 2011-01-09  Robert Millan  <rmh@gnu.org>  (tiny patch)
 456
 457         * configure.tgt: Detect GNU/kFreeBSD and set `gdb_osabi'
 458         appropiately.
 459
 460 2011-01-11  Tom Tromey  <tromey@redhat.com>
 461
 462         * thread.c (do_captured_thread_select): Emit newline before
 463         printing frame.
 464
 465 2011-01-11  Michael Snyder  <msnyder@vmware.com>
 466
 467         * s390-tdep.c: Comment cleanup, mostly periods and spaces.
 468         * score-tdep.c: Ditto.
 469         * score-tdep.h: Ditto.
 470         * ser-base.c: Ditto.
 471         * ser-go32.c: Ditto.
 472         * serial.c: Ditto.
 473         * serial.h: Ditto.
 474         * ser-mingw.c: Ditto.
 475         * ser-pipe.c: Ditto.
 476         * ser-tcp.c: Ditto.
 477         * ser-unix.c: Ditto.
 478         * sh64-tdep.c: Ditto.
 479         * shnbsd-nat.c: Ditto.
 480         * sh-tdep.c: Ditto.
 481         * sh-tdep.h: Ditto.
 482         * solib.c: Ditto.
 483         * solib-darwin.c: Ditto.
 484         * solib-frv.c: Ditto.
 485         * solib.h: Ditto.
 486         * solib-irix.c: Ditto.
 487         * solib-osf.c: Ditto.
 488         * solib-pa64.c: Ditto.
 489         * solib-som.c: Ditto.
 490         * solib-spu.c: Ditto.
 491         * solib-sunos.c: Ditto.
 492         * solib-svr4.c: Ditto.
 493         * solist.h: Ditto.
 494         * sol-thread.c: Ditto.
 495         * somread.c: Ditto.
 496         * source.c: Ditto.
 497         * source.h: Ditto.
 498         * sparc64-linux-tdep.c: Ditto.
 499         * sparc64-tdep.c: Ditto.
 500         * sparc-linux-nat.c: Ditto.
 501         * sparc-linux-tdep.c: Ditto.
 502         * sparc-sol2-nat.c: Ditto.
 503         * sparc-sol2-tdep.c: Ditto.
 504         * sparc-tdep.c: Ditto.
 505         * sparc-tdep.h: Ditto.
 506         * spu-tdep.c: Ditto.
 507         * stabsread.c: Ditto.
 508         * stabsread.h: Ditto.
 509         * stack.c: Ditto.
 510         * symfile.c: Ditto.
 511         * symfile.h: Ditto.
 512         * symmisc.c: Ditto.
 513         * symtab.c: Ditto.
 514         * symtab.h: Ditto.
 515         * target.c: Ditto.
 516         * target-descriptions.c: Ditto.
 517         * target-descriptions.h: Ditto.
 518         * target.h: Ditto.
 519         * target-memory.c: Ditto.
 520         * terminal.h: Ditto.
 521         * thread.c: Ditto.
 522         * top.c: Ditto.
 523         * tracepoint.c: Ditto.
 524         * tracepoint.h: Ditto.
 525         * trad-frame.h: Ditto.
 526         * typeprint.c: Ditto.
 527
 528 2011-01-11  Michael Snyder  <msnyder@vmware.com>
 529
 530         * ui-file.c: Comment cleanup, mostly periods and spaces.
 531         * ui-file.h: Ditto.
 532         * ui-out.c: Ditto.
 533         * ui-out.h: Ditto.
 534         * utils.c: Ditto.
 535         * v850-tdep.c: Ditto.
 536         * valarith.c: Ditto.
 537         * valops.c: Ditto.
 538         * valprint.c: Ditto.
 539         * valprint.h: Ditto.
 540         * value.c: Ditto.
 541         * value.h: Ditto.
 542         * varobj.c: Ditto.
 543         * varobj.h: Ditto.
 544         * vax-tdep.c: Ditto.
 545         * vec.c: Ditto.
 546         * vec.h: Ditto.
 547         * version.h: Ditto.
 548         * windows-nat.c: Ditto.
 549         * windows-tdep.c: Ditto.
 550         * xcoffread.c: Ditto.
 551         * xcoffsolib.c: Ditto.
 552         * xml-support.c: Ditto.
 553         * xstormy16-tdep.c: Ditto.
 554         * xtensa-tdep.c: Ditto.
 555         * xtensa-tdep.h: Ditto.
 556
 557 2011-01-11  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 558
 559         * breakpoint.c (resources_needed_watchpoint): Fix indentation.
 560         * gdbtypes.c (is_scalar_type_recursive): Fix formatting.
 561
 562 2011-01-11  Sergio Durigan Junior  <sergiodj@linux.vnet.ibm.com>
 563             Thiago Jung Bauermann  <bauerman@br.ibm.com>
 564
 565         Implement support for PowerPC BookE ranged watchpoints.
 566         * breakpoint.h
 567         (struct breakpoint_ops) <resources_needed>: New method.
 568         Initialize to NULL in all existing breakpoint_ops instances.
 569         (struct breakpoint) <exact>: New field.
 570         (target_exact_watchpoints): Declare external global.
 571         * breakpoint.c (target_exact_watchpoints): New global flag.
 572         (update_watchpoint): Set b->type to bp_hardware_watchpoint and
 573         b->enable_state to bp_enabled before calling
 574         hw_watchpoint_used_count.
 575         (hw_watchpoint_used_count): Iterate over all bp_locations in a
 576         watchpoint.  Call breakpoint's breakpoint_ops.resources_needed
 577         if available.
 578         (insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte
 579         if the watchpoint is exact.
 580         (resources_needed_watchpoint): New function.
 581         (watchpoint_breakpoint_ops): Add resources_needed_watchpoint.
 582         (watch_command_1): Set b->exact if the user asked for an exact
 583         watchpoint and one can be set.
 584         (can_use_hardware_watchpoint): Add exact_watchpoints argument.
 585         Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if
 586         the user asks for an exact watchpoint and one can be set.  Return
 587         number of needed debug registers to watch the expression.
 588         * gdbtypes.c (is_scalar_type): New function, based on
 589         valprint.c:scalar_type_p.
 590         (is_scalar_type_recursive): New function.
 591         * gdbtypes.h (is_scalar_type_recursive): Declare.
 592         * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always
 593         handle regions when ranged watchpoints are available.
 594         (create_watchpoint_request): New function.
 595         (ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
 596         create_watchpoint_request.
 597         * rs6000-tdep.c (show_powerpc_exact_watchpoints): New function.
 598         (_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the
 599         `set powerpc' and `show powerpc' commands.
 600         * target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
 601         Mention documentation comment in the target macro.
 602         (target_region_ok_for_hw_watchpoint): Document return value.
 603
 604 2011-01-11  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 605
 606         * breakpoint.c (update_watchpoint): Decide on using a software or
 607         hardware watchpoint after the bp_locations are created.
 608
 609 2010-01-11  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 610
 611         Convert hardware watchpoints to use breakpoint_ops.
 612         * breakpoint.h (breakpoint_ops) <insert>: Rename to...
 613         <insert_location>: ... this.  Return int instead of void.
 614         Accept pointer to struct bp_location instead of pointer to
 615         struct breakpoint.  Adapt all implementations.
 616         (breakpoint_ops) <remove>: Rename to...
 617         <remove_location>: ... this.  Accept pointer to struct bp_location
 618         instead of pointer to struct breakpoint.  Adapt all implementations.
 619         * breakpoint.c (insert_catchpoint): Delete function.
 620         (insert_bp_location): Call the watchpoint or catchpoint's
 621         breakpoint_ops.insert method.
 622         (remove_breakpoint_1): Call the watchpoint or catchpoint's
 623         breakpoint_ops.remove method.
 624         (insert_watchpoint, remove_watchpoint): New functions.
 625         (watchpoint_breakpoint_ops): New structure.
 626         (watch_command_1): Initialize the OPS field.
 627         * inf-child.c (inf_child_insert_fork_catchpoint)
 628         (inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint)
 629         (inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint)
 630         (inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint):
 631         Delete functions.
 632         (inf_child_target): Remove initialization of to_insert_fork_catchpoint,
 633         to_remove_fork_catchpoint, to_insert_vfork_catchpoint,
 634         to_remove_vfork_catchpoint, to_insert_exec_catchpoint,
 635         to_remove_exec_catchpoint and to_set_syscall_catchpoint.
 636         * target.c (update_current_target): Change default implementation of
 637         to_insert_fork_catchpoint, to_remove_fork_catchpoint,
 638         to_insert_vfork_catchpoint, to_remove_vfork_catchpoint,
 639         to_insert_exec_catchpoint, to_remove_exec_catchpoint and
 640         to_set_syscall_catchpoint to return_one.
 641         (debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint)
 642         (debug_to_insert_exec_catchpoint): Report return value.
 643         * target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint)
 644         (to_insert_exec_catchpoint): Change declaration to return int instead
 645         of void.
 646
 647 2011-01-11  Michael Snyder  <msnyder@vmware.com>
 648
 649         * arm-tdep.c: Internationalization.
 650         * c-lang.c: Ditto.
 651         * charset.c: Ditto.
 652         * fork-child.c: Ditto.
 653         * nto-procfs.c: Ditto.
 654         * ppc-sysv-tdep.c: Ditto.
 655         * procfs.c: Ditto.
 656         * remote-mips.c: Ditto.
 657         * remote.c: Ditto.
 658         * rs6000-nat.c: Ditto.
 659         * rs6000-tdep.c: Ditto.
 660         * target.c: Ditto.
 661         * valops.c: Ditto.
 662         * value.c: Ditto.
 663         * xml-support.c: Ditto.
 664         * mi/mi-cmd-break.c: Ditto.
 665         * mi/mi-cmd-var.c: Ditto.
 666         * mi/mi-interp.c: Ditto.
 667         * mi/mi-main.c: Ditto.
 668
 669 2011-01-11  Andrew Burgess  <aburgess@broadcom.com>
 670
 671         * remote-sim.c (gdbsim_store_register): Update API to
 672         sim_store_register to check more error conditions.
 673
 674 2011-01-10  Michael Snyder  <msnyder@vmware.com>
 675
 676         * nto-procfs.c: Comment cleanup, mostly periods and spaces.
 677         * nto-tdep.c: Ditto.
 678         * nto-tdep.h: Ditto.
 679         * objc-exp.y: Ditto.
 680         * objc-lang.c: Ditto.
 681         * objfiles.c: Ditto.
 682         * objfiles.h: Ditto.
 683         * observer.c: Ditto.
 684         * opencl-lang.c: Ditto.
 685         * osabi.c: Ditto.
 686         * parse.c: Ditto.
 687         * parser-defs.h: Ditto.
 688         * p-exp.y: Ditto.
 689         * p-lang.c: Ditto.
 690         * posix-hdep.c: Ditto.
 691         * ppcbug-rom.c: Ditto.
 692         * ppc-linux-nat.c: Ditto.
 693         * ppc-linux-tdep.c: Ditto.
 694         * ppc-linux-tdep.h: Ditto.
 695         * ppcnbsd-tdep.c: Ditto.
 696         * ppcobsd-tdep.c: Ditto.
 697         * ppcobsd-tdep.h: Ditto.
 698         * ppc-sysv-tdep.c: Ditto.
 699         * ppc-tdep.h: Ditto.
 700         * printcmd.c: Ditto.
 701         * proc-abi.c: Ditto.
 702         * proc-flags.c: Ditto.
 703         * procfs.c: Ditto.
 704         * proc-utils.h: Ditto.
 705         * progspace.h: Ditto.
 706         * prologue-value.c: Ditto.
 707         * prologue-value.h: Ditto.
 708         * psympriv.h: Ditto.
 709         * psymtab.c: Ditto.
 710         * p-typeprint.c: Ditto.
 711         * p-valprint.c: Ditto.
 712         * ravenscar-sparc-thread.c: Ditto.
 713         * ravenscar-thread.c: Ditto.
 714         * ravenscar-thread.h: Ditto.
 715         * record.c: Ditto.
 716         * regcache.c: Ditto.
 717         * regcache.h: Ditto.
 718         * remote.c: Ditto.
 719         * remote-fileio.c: Ditto.
 720         * remote-fileio.h: Ditto.
 721         * remote.h: Ditto.
 722         * remote-m32r-sdi.c: Ditto.
 723         * remote-mips.c: Ditto.
 724         * remote-sim.c: Ditto.
 725         * rs6000-aix-tdep.c: Ditto.
 726         * rs6000-nat.c: Ditto.
 727         * rs6000-tdep.c: Ditto.
 728
 729 2011-01-10  Michael Snyder  <msnyder@vmware.com>
 730
 731         * charset.c (validate): Internationalization.
 732         * coffread.c (read_one_sym): Ditto.
 733         * dwarf2read.c (dwarf2_attach_fields_to_type): Ditto.
 734         * h8300-tdep.c (H8300_extract_return_value): Ditto.
 735         * inflow.c (new_tty): Ditto.
 736         * iq2000-tdep.c (iq2000_breakpoint_from_pc): Ditto.
 737         * m32c-tdep.c (m32c_return_value): Ditto.
 738         * mep-tdep.c (mep_store_return_value): Ditto.
 739         * score-tdep.c (score7_fetch_insn): Ditto.
 740         * ser-mingw.c (pipe_windows_open): Ditto.
 741         * sh64-tdep.c (sh64_extract_return_value): Ditto.
 742         * spu-tdep.c (spu_register_type): Ditto.
 743         * tracepoint.c (trace_find_command): Ditto.
 744         * valarith.c (value_pos): Ditto.
 745
 746 2011-01-10  Joel Brobecker  <brobecker@adacore.com>
 747
 748         * ada-valprint.c (printstr): Minor comment reformatting.
 749
 750 2011-01-08  Michael Snyder  <msnyder@vmware.com>
 751
 752         * m32r-rom.c (m32r_upload_command): Fix up ARI warnings for _
 753         markup.
 754
 755 2011-01-08  Michael Snyder  <msnyder@vmware.com>
 756
 757         * h8300-tdep.c: Comment cleanup, mostly periods and spaces.
 758         * hppa-hpux-tdep.c: Ditto.
 759         * hppa-linux-nat.c: Ditto.
 760         * hppa-linux-tdep.c: Ditto.
 761         * hppanbsd-tdep.c: Ditto.
 762         * hppa-tdep.c: Ditto.
 763         * hppa-tdep.h: Ditto.
 764         * hpux-thread.c: Ditto.
 765         * i386-cygwin-tdep.c: Ditto.
 766         * i386-darwin-nat.c: Ditto.
 767         * i386gnu-nat.c: Ditto.
 768         * i386-linux-nat.c: Ditto.
 769         * i386-linux-tdep.c: Ditto.
 770         * i386-nat.c: Ditto.
 771         * i386-nat.h: Ditto.
 772         * i386nbsd-tdep.c: Ditto.
 773         * i386-sol2-nat.c: Ditto.
 774         * i386-stub.c: Ditto.
 775         * i386-tdep.c: Ditto.
 776         * i386-tdep.h: Ditto.
 777         * i387-tdep.c: Ditto.
 778         * ia64-linux-nat.c: Ditto.
 779         * ia64-linux-tdep.c: Ditto.
 780         * ia64-tdep.c: Ditto.
 781         * infcall.c: Ditto.
 782         * infcall.h: Ditto.
 783         * infcmd.c: Ditto.
 784         * inferior.c: Ditto.
 785         * inferior.h: Ditto.
 786         * infloop.c: Ditto.
 787         * inflow.c: Ditto.
 788         * infrun.c: Ditto.
 789         * interps.c: Ditto.
 790         * interps.h: Ditto.
 791         * iq2000-tdep.c: Ditto.
 792         * irix5-nat.c: Ditto.
 793         * jit.c: Ditto.
 794         * jit.h: Ditto.
 795         * jv-exp.y: Ditto.
 796         * jv-lang.c: Ditto.
 797         * jv-lang.h: Ditto.
 798         * jv-typeprint.c: Ditto.
 799         * jv-valprint.c: Ditto.
 800         * language.c: Ditto.
 801         * language.h: Ditto.
 802         * linespec.c: Ditto.
 803         * linux-fork.c: Ditto.
 804         * linux-nat.c: Ditto.
 805         * linux-thread-db.c: Ditto.
 806         * lm32-tdep.c: Ditto.
 807
 808 2011-01-08  Michael Snyder  <msnyder@vmware.com>
 809
 810         * m2-exp.y: Comment cleanup, mostly periods and spaces.
 811         * m2-lang.c: Ditto.
 812         * m2-typeprint.c: Ditto.
 813         * m2-valprint.c: Ditto.
 814         * m32c-tdep.c: Ditto.
 815         * m32r-linux-nat.c: Ditto.
 816         * m32r-rom.c: Ditto.
 817         * m32r-tdep.c: Ditto.
 818         * m32r-tdep.h: Ditto.
 819         * m68hc11-tdep.c: Ditto.
 820         * m58klinux-nat.c: Ditto.
 821         * m68k-tdep.c: Ditto.
 822         * m88k-tdep.c: Ditto.
 823         * m88k-tdep.h: Ditto.
 824         * machoread.c: Ditto.
 825         * macrocmd.c: Ditto.
 826         * macroexp.c: Ditto.
 827         * macrotab.c: Ditto.
 828         * main.c: Ditto.
 829         * maint.c: Ditto.
 830         * mdebugread.c: Ditto.
 831         * mdebugread.h: Ditto.
 832         * memattr.c: Ditto.
 833         * memattr.h: Ditto.
 834         * memory-map.h: Ditto.
 835         * mep-tdep.c: Ditto.
 836         * microblaze-rom.c: Ditto.
 837         * microblaze-tdep.c: Ditto.
 838         * minsyms.c: Ditto.
 839         * mips-irix-tdep.c: Ditto.
 840         * mips-linux-nat.c: Ditto.
 841         * mips-linux-tdep.c: Ditto.
 842         * mips-linux-tdep.h: Ditto.
 843         * mipsnbsd-nat.c: Ditto.
 844         * mipsnbsd-tdep.c: Ditto.
 845         * mipsread.c: Ditto.
 846         * mips-tdep.c: Ditto.
 847         * mips-tdep.h: Ditto.
 848         * mn10300-linux-tdep.c: Ditto.
 849         * mn10300-tdep.c: Ditto.
 850         * mn10300-tdep.h: Ditto.
 851         * monitor.c: Ditto.
 852         * monitor.h: Ditto.
 853         * moxie-tdep.c: Ditto.
 854         * moxie-tdep.h: Ditto.
 855         * mt-tdep.c: Ditto.
 856
 857 2011-01-08  Mike Frysinger  <vapier@gentoo.org>
 858
 859         * bfin-tdep.h (BFIN_A0_DOT_W_REGNUM): Fix typo in name.
 860
 861 2011-01-08  Robert Millan  <rmh@gnu.org>
 862
 863         * fbsd-nat.c (fbsd_find_memory_regions): Fix typo.
 864
 865 2011-01-07  Michael Snyder  <msnyder@vmware.com>
 866
 867         * charset.c (_initialize_charset): Fix typo in string.
 868
 869 2011-01-07  Michael Snyder  <msnyder@vmware.com>
 870
 871         * mi/mi-cmd-disas.c (mi_cmd_disassemble): Mark up error message
 872         for i18n.
 873         * tui/tui-layout.c (tui_set_layout_for_display_command):
 874         Split line so that operator goes to beginning of line.
 875         * tui/tui-winsource.c (tui_horizontal_source_scroll): Move
 876         assignment out of if statement.
 877
 878 2011-01-07  Michael Snyder  <msnyder@vmware.com>
 879
 880         * ada-lang.c: Comment cleanup, mostly periods and spaces.
 881         * ada-lang.h: Ditto.
 882         * ada-tasks.c: Ditto.
 883         * ada-valprint.c: Ditto.
 884         * aix-threads.c: Ditto.
 885         * alpha-linux-nat.c: Ditto.
 886         * alpha-linux-tdep.c: Ditto.
 887         * alpha-mdebug-tdep.c: Ditto.
 888         * alpha-nat.c: Ditto.
 889         * alpha-osf1-tdep.c: Ditto.
 890         * alpha-tdep.c: Ditto.
 891         * alphabsd-nat.c: Ditto.
 892         * alphabsd-tdep.c: Ditto.
 893         * amd64-darwin-tdep.c: Ditto.
 894         * amd64-linux-nat.c: Ditto.
 895         * amd64-linux-tdep.c: Ditto.
 896         * amd64-sol2-tdep.c: Ditto.
 897         * amd64-tdep.c: Ditto.
 898         * amd64-fbsd-tdep.c: Ditto.
 899         * amd64-nbsd-tdep.c: Ditto.
 900         * amd64-obsd-tdep.c: Ditto.
 901         * amd64-linux-nat.c: Ditto.
 902         * amd64-linux-tdep.c: Ditto.
 903         * arm-tdep.c: Ditto.
 904         * arm-tdep.h: Ditto.
 905         * armnbsd-nat.c: Ditto.
 906         * avr-tdep.c: Ditto.
 907         * bfin-tdep.c: Ditto.
 908         * bsd-kvm.c: Ditto.
 909         * c-typeprintc: Ditto.
 910         * c-valprint.c: Ditto.
 911         * coff-pe-read.h: Ditto.
 912         * coffreead.c: Ditto.
 913         * cris-tdep.c: Ditto.
 914         * d-lang.c: Ditto.
 915         * darwin-nat-info.c: Ditto.
 916         * darwin-nat.c: Ditto.
 917         * dbug-rom.c: Ditto.
 918         * dbxread.c: Ditto.
 919         * dcache.c: Ditto.
 920         * dcache.h: Ditto.
 921         * dec-thread.c: Ditto.
 922         * defs.h: Ditto.
 923         * demangle.c: Ditto.
 924         * dicos-tdep.c: Ditto.
 925         * dictionary.c: Ditto.
 926         * dictionary.h: Ditto.
 927         * dink32-rom.c: Ditto.
 928         * disasm.c: Ditto.
 929         * doublest.c: Ditto.
 930         * dsrec.c: Ditto.
 931         * dummy-frame.c: Ditto.
 932         * dwarf2-frame.c: Ditto.
 933         * dwarf2expr.c: Ditto.
 934         * dwarf2loc.c: Ditto.
 935         * dwarf2read.c: Ditto.
 936         * elfread.c: Ditto.
 937         * environ.c: Ditto.
 938         * eval.c: Ditto.
 939         * event-top.h: Ditto.
 940         * exceptions.c: Ditto.
 941         * exceptions.h: Ditto.
 942         * exec.c: Ditto.
 943         * expprint.c: Ditto.
 944         * expression.h: Ditto.
 945         * f-exp.y: Ditto.
 946         * f-lang.c: Ditto.
 947         * f-lang.h: Ditto.
 948         * f-typeprint.c: Ditto.
 949         * f-valprint.c: Ditto.
 950         * fbsd-nat.c: Ditto.
 951         * findvar.c: Ditto.
 952         * fork-child.c: Ditto.
 953         * frame.c: Ditto.
 954         * frame.h: Ditto.
 955         * frv-linux-tdep.c: Ditto.
 956         * frv-tdep.c: Ditto.
 957         * gcore.c: Ditto.
 958         * gdb-stabs.h: Ditto.
 959         * gdb_assert.h: Ditto.
 960         * gdb_string.h: Ditto.
 961         * gdb_thread_db.h: Ditto.
 962         * gdb_wait.h: Ditto.
 963         * gdbarch.sh: Ditto.
 964         * gdbcore.h: Ditto.
 965         * gdbthread.h: Ditto.
 966         * gdbtypes.c: Ditto.
 967         * gdbtypes.h: Ditto.
 968         * gnu-nat.c: Ditto.
 969         * gnu-nat.h: Ditto.
 970         * gnu-v2-abi.c: Ditto.
 971         * gnu-v3-abi.c: Ditto.
 972         * go32-nat.c: Ditto.
 973         * gdbarch.c: Regenerate.
 974         * gdbarch.h: Regenerate.
 975
 976 2011-01-07  Michael Snyder  <msnyder@vmware.com>
 977
 978         * ax-gdb.c: Adjust some long output strings.
 979         * breakpoint.c: Ditto.
 980         * charset.c: Ditto.
 981         * cp-abi.c: Ditto.
 982         * infcall.c: Ditto.
 983         * infrun.c: Ditto.
 984         * linux-nat.c: Ditto.
 985         * solib-pa64.c: Ditto.
 986         * solib-som.c: Ditto.
 987
 988 2011-01-06  Tom Tromey  <tromey@redhat.com>
 989
 990         PR python/12367:
 991         * NEWS: Add item.
 992         * python/python.c (GdbMethods): Add "newest_frame" method.
 993         * python/python-internal.h (gdbpy_newest_frame): Declare.
 994         * python/py-frame.c (gdbpy_newest_frame): New function.
 995
 996 2010-01-06  Paul Pluzhnikov  <ppluzhnikov@google.com>
 997
 998         * jit.h (struct jit_code_entry): use ULONGEST for symfile_size.
 999         * jit.c (jit_debug): New variable.
1000         (show_jit_debug): New function.
1001         (struct target_buffer): Use ULONGEST.
1002         (bfd_open_from_target_memory): Likewise.
1003         (jit_register_code, jit_inferior_init): Add debug output.
1004         (_initialize_jit): Register "debug jit" command.
1005
1006 2011-01-06  Tom Tromey  <tromey@redhat.com>
1007
1008         * frame.h (enum frame_type) <INLINE_FRAME>: Fix comment.
1009         * python/py-frame.c (gdbpy_initialize_frames): Add INLINE_FRAME
1010         and ARCH_FRAME.
1011
1012 2011-01-06  Tom Tromey  <tromey@redhat.com>
1013
1014         * python/py-frame.c (frapy_block): Use get_frame_block.
1015
1016 2011-01-06  Joel Brobecker  <brobecker@adacore.com>
1017
1018         Do not stop on SIGPRIO signals by default
1019         * infrun.c (_initialize_infrun): Unset signal_stop and
1020         signal_print for TARGET_SIGNAL_PRIO.
1021
1022 2011-01-06  Joel Brobecker  <brobecker@adacore.com>
1023
1024         * ada-tasks.c: Fix style violation in comment.
1025
1026 2011-01-06  Joel Brobecker  <brobecker@adacore.com>
1027
1028         * linespec.c (decode_compound, find_method): Remove trailing \n
1029         at end of error string.
1030         * solib-irix.c (irix_current_sos): Likewise.
1031         * varobj.c (uninstall_variable): Likewise.
1032
1033 2011-01-06  Joel Brobecker  <brobecker@adacore.com>
1034
1035         * copyright.py: New script.
1036         * copyright.sh (byhand): Add *.ads, *.adb, *.gpr and *.inc.
1037         Launch emacs without exec'ing. Call copyright.py afterwards.
1038
1039 2011-01-05  Michael Snyder  <msnyder@vmware.com>
1040
1041         * addrmap.c: Shorten lines of >= 80 columns.
1042         * arch-utils.c: Ditto.
1043         * arch-utils.h: Ditto.
1044         * ax-gdb.c: Ditto.
1045         * ax-general.c: Ditto.
1046         * bcache.c: Ditto.
1047         * blockframe.c: Ditto.
1048         * breakpoint.c: Ditto.
1049         * buildsym.c: Ditto.
1050         * c-lang.c: Ditto.
1051         * c-typeprint.c: Ditto.
1052         * charset.c: Ditto.
1053         * coffread.c: Ditto.
1054         * command.h: Ditto.
1055         * corelow.c: Ditto.
1056         * cp-abi.c: Ditto.
1057         * cp-namespace.c: Ditto.
1058         * cp-support.c: Ditto.
1059         * dbug-rom.c: Ditto.
1060         * dbxread.c: Ditto.
1061         * defs.h: Ditto.
1062         * dfp.c: Ditto.
1063         * dfp.h: Ditto.
1064         * dictionary.c: Ditto.
1065         * disasm.c: Ditto.
1066         * doublest.c: Ditto.
1067         * dwarf2-frame.c: Ditto.
1068         * dwarf2expr.c: Ditto.
1069         * dwarf2loc.c: Ditto.
1070         * dwarf2read.c: Ditto.
1071         * elfread.c: Ditto.
1072         * eval.c: Ditto.
1073         * event-loop.c: Ditto.
1074         * event-loop.h: Ditto.
1075         * exceptions.h: Ditto.
1076         * exec.c: Ditto.
1077         * expprint.c: Ditto.
1078         * expression.h: Ditto.
1079         * f-lang.c: Ditto.
1080         * f-valprint.c: Ditto.
1081         * findcmd.c: Ditto.
1082         * frame-base.c: Ditto.
1083         * frame-unwind.c: Ditto.
1084         * frame-unwind.h: Ditto.
1085         * frame.c: Ditto.
1086         * frame.h: Ditto.
1087         * gcore.c: Ditto.
1088         * gdb-stabs.h: Ditto.
1089         * gdb_assert.h: Ditto.
1090         * gdb_dirent.h: Ditto.
1091         * gdb_obstack.h: Ditto.
1092         * gdbcore.h: Ditto.
1093         * gdbtypes.c: Ditto.
1094         * gdbtypes.h: Ditto.
1095         * inf-ttrace.c: Ditto.
1096         * infcall.c: Ditto.
1097         * infcmd.c: Ditto.
1098         * inflow.c: Ditto.
1099         * infrun.c: Ditto.
1100         * inline-frame.h: Ditto.
1101         * language.c: Ditto.
1102         * language.h: Ditto.
1103         * libunwind-frame.c: Ditto.
1104         * libunwind-frame.h: Ditto.
1105         * linespec.c: Ditto.
1106         * linux-nat.c: Ditto.
1107         * linux-nat.h: Ditto.
1108         * linux-thread-db.c: Ditto.
1109         * machoread.c: Ditto.
1110         * macroexp.c: Ditto.
1111         * macrotab.c: Ditto.
1112         * main.c: Ditto.
1113         * maint.c: Ditto.
1114         * mdebugread.c: Ditto.
1115         * memattr.c: Ditto.
1116         * minsyms.c: Ditto.
1117         * monitor.c: Ditto.
1118         * monitor.h: Ditto.
1119         * objfiles.c: Ditto.
1120         * objfiles.h: Ditto.
1121         * osabi.c: Ditto.
1122         * p-typeprint.c: Ditto.
1123         * p-valprint.c: Ditto.
1124         * parse.c: Ditto.
1125         * printcmd.c: Ditto.
1126         * proc-events.c: Ditto.
1127         * procfs.c: Ditto.
1128         * progspace.c: Ditto.
1129         * progspace.h: Ditto.
1130         * psympriv.h: Ditto.
1131         * psymtab.c: Ditto.
1132         * record.c: Ditto.
1133         * regcache.c: Ditto.
1134         * regcache.h: Ditto.
1135         * remote-fileio.c: Ditto.
1136         * remote.c: Ditto.
1137         * ser-mingw.c: Ditto.
1138         * ser-tcp.c: Ditto.
1139         * ser-unix.c: Ditto.
1140         * serial.c: Ditto.
1141         * serial.h: Ditto.
1142         * solib-frv.c: Ditto.
1143         * solib-irix.c: Ditto.
1144         * solib-osf.c: Ditto.
1145         * solib-pa64.c: Ditto.
1146         * solib-som.c: Ditto.
1147         * solib-sunos.c: Ditto.
1148         * solib-svr4.c: Ditto.
1149         * solib-target.c: Ditto.
1150         * solib.c: Ditto.
1151         * somread.c: Ditto.
1152         * source.c: Ditto.
1153         * stabsread.c: Ditto.
1154         * stabsread.c: Ditto.
1155         * stack.c: Ditto.
1156         * stack.h: Ditto.
1157         * symfile-mem.c: Ditto.
1158         * symfile.c: Ditto.
1159         * symfile.h: Ditto.
1160         * symmisc.c: Ditto.
1161         * symtab.c: Ditto.
1162         * symtab.h: Ditto.
1163         * target-descriptions.c: Ditto.
1164         * target-memory.c: Ditto.
1165         * target.c: Ditto.
1166         * target.h: Ditto.
1167         * terminal.h: Ditto.
1168         * thread.c: Ditto.
1169         * top.c: Ditto.
1170         * tracepoint.c: Ditto.
1171         * tracepoint.h: Ditto.
1172         * ui-file.c: Ditto.
1173         * ui-file.h: Ditto.
1174         * ui-out.h: Ditto.
1175         * user-regs.c: Ditto.
1176         * user-regs.h: Ditto.
1177         * utils.c: Ditto.
1178         * valarith.c: Ditto.
1179         * valops.c: Ditto.
1180         * valprint.c: Ditto.
1181         * valprint.h: Ditto.
1182         * value.c: Ditto.
1183         * varobj.c: Ditto.
1184         * varobj.h: Ditto.
1185         * vec.h: Ditto.
1186         * xcoffread.c: Ditto.
1187         * xcoffsolib.c: Ditto.
1188         * xcoffsolib.h: Ditto.
1189         * xml-syscall.c: Ditto.
1190         * xml-tdesc.c: Ditto.
1191
1192 2011-01-05  Michael Snyder  <msnyder@vmware.com>
1193
1194         * cli/cli-cmds.c: Shorten lines of >= 80 columns.
1195         * cli/cli-decode.c: Ditto.
1196         * cli/cli-dump.c: Ditto.
1197         * cli/cli-logging.c: Ditto.
1198         * cli/cli-script.c: Ditto.
1199         * cli/cli-setshow.c: Ditto.
1200         * common/signals.c: Ditto.
1201         * mi/mi-cmd-break.c: Ditto.
1202         * mi/mi-cmd-disas.c: Ditto.
1203         * mi/mi-cmd-stack.c: Ditto.
1204         * mi/mi-cmd-var.c: Ditto.
1205         * mi/mi-cmds.c: Ditto.
1206         * mi/mi-common.h: Ditto.
1207         * mi/mi-console.c: Ditto.
1208         * mi/mi-interp.c: Ditto.
1209         * mi/mi-main.c: Ditto.
1210         * osf-share/cma_attr.c: Ditto.
1211         * osf-share/cma_deb_core.h: Ditto.
1212         * osf-share/cma_debug_client.h: Ditto.
1213         * osf-share/cma_handle.h: Ditto.
1214         * osf-share/cma_mutex.h: Ditto.
1215         * osf-share/cma_stack_int.h: Ditto.
1216         * osf-share/cma_tcb_defs.h: Ditto.
1217         * python/py-auto-load.c: Ditto.
1218         * python/py-breakpoint.c: Ditto.
1219         * python/py-cmd.c: Ditto.
1220         * python/py-frame.c: Ditto.
1221         * python/py-objfile.c: Ditto.
1222         * python/py-param.c: Ditto.
1223         * python/py-progspace.c: Ditto.
1224         * python/py-symbol.c: Ditto.
1225         * python/py-value.c: Ditto.
1226         * python/python-internal.h: Ditto.
1227         * python/python.c: Ditto.
1228         * tui/tui-data.c: Ditto.
1229         * tui/tui-disasm.c: Ditto.
1230         * tui/tui-hooks.c: Ditto.
1231         * tui/tui-io.c: Ditto.
1232         * tui/tui-layout.c: Ditto.
1233         * tui/tui-regs.c: Ditto.
1234         * tui/tui-source.c: Ditto.
1235         * tui/tui-stack.c: Ditto.
1236         * tui/tui-win.c: Ditto.
1237         * tui/tui-windata.c: Ditto.
1238         * tui/tui-winsource.c: Ditto.
1239
1240 2011-01-05  Joel Brobecker  <brobecker@adacore.com>
1241
1242         * configure.ac, gdb.1: Copyright year update.
1243
1244 2011-01-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
1245
1246         * frame.c (get_prev_frame_1) <UNWIND_INNER_ID>: New variables
1247         this_pc_in_block, morestack_msym and morestack_name.  Check for
1248         "__morestack" minimal symbol there.
1249
1250 2011-01-03  Joel Brobecker  <brobecker@adacore.com>
1251
1252         * symfile.c (find_sym_fns): Add call to dont_repeat.
1253
1254 2011-01-01  Joel Brobecker  <brobecker@adacore.com>
1255
1256         Copyright year update in most files (performed by copyright.sh).
1257
1258 2011-01-01  Joel Brobecker  <brobecker@adacore.com>
1259
1260         * top.c (print_gdb_version): Update copyright year in version output.
1261
1262 For older changes see ChangeLog-2010.
1263 \f
1264 Local Variables:
1265 mode: change-log
1266 left-margin: 8
1267 fill-column: 74
1268 version-control: never
1269 coding: utf-8
1270 End: