1 2013-03-20 Pierre Muller <muller@sourceware.org>
3 * contrib/ari/gdb_ari.sh (OP eol rule): Also check
4 addtion, subtraction, multiplication and division binary operator.
6 2013-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
9 * bfd-target.c (target_bfd_xclose): Remove parameter quitting.
10 * bsd-kvm.c (bsd_kvm_close): Likewise.
11 * bsd-uthread.c (bsd_uthread_close): Likewise.
12 * corelow.c (core_close): Likewise.
13 (core_close_cleanup): Remove parameter quitting from a caller.
14 * event-top.c (async_disconnect): Likewise.
15 * exec.c (exec_close_1): Remove parameter quitting.
16 * go32-nat.c (go32_close): Likewise.
17 * linux-nat.c (linux_nat_close): Remove parameter quitting. Remove
18 parameter quitting from a caller.
19 * mips-linux-nat.c (super_close): Remove parameter quitting from the
21 (mips_linux_close): Remove parameter quitting. Remove parameter
22 quitting from a caller.
23 * monitor.c (monitor_close): Remove parameter quitting.
24 * monitor.h (monitor_close): Likewise.
25 * record-btrace.c (record_btrace_close): Likewise.
26 * record-full.c (record_full_close): Likewise.
27 * remote-m32r-sdi.c (m32r_close): Remove parameter quitting and remove
28 it also from fprintf_unfiltered.
29 * remote-mips.c (mips_close): Remove parameter quitting.
30 (mips_detach): Remove parameter quitting from a caller.
31 * remote-sim.c (gdbsim_close): Remove parameter quitting.
32 (gdbsim_close): Remove duplicate function comment. Remove parameter
33 quitting and remove it also from printf_filtered.
34 * remote.c (remote_close): Remove parameter quitting.
35 * solib-svr4.c (enable_break): Remove parameter quitting from a caller.
36 * target.c (update_current_target): Remove parameter int from to_close
38 (push_target, unpush_target, pop_target): Remove parameter quitting from
40 (pop_all_targets_above, pop_all_targets): Remove parameter quitting.
41 Remove parameter quitting from a caller.
42 (target_preopen): Remove parameter quitting from a caller.
43 (target_close): Remove parameter quitting. Remove parameter quitting
44 from a caller two times. Remove parameter quitting also from
46 * target.h (struct target_ops): Remove parameter quitting and as int
47 from fields to_xclose and to_close.
48 (extern struct target_ops current_target):
49 (target_close, pop_all_targets): Remove parameter quitting. Update the
51 (pop_all_targets_above): Remove parameter quitting.
52 * top.c (quit_target): Remove parameter quitting from a caller.
53 * tracepoint.c (tfile_close): Remove parameter quitting.
54 * windows-nat.c (windows_close): Remove parameter quitting.
56 2013-03-20 Corinna Vinschen <vinschen@redhat.com>
58 * windows-nat.c (handle_output_debug_string): Replace call
59 to string_to_core_addr with call to strtoull.
61 2013-03-20 Yao Qi <yao@codesourcery.com>
63 * ctf.c (ctf_save_metadata_header): Define macro HOST_ENDIANNESS
64 and write it to CTF metadata.
66 2013-03-19 Corinna Vinschen <vinschen@redhat.com>
68 * windows-nat.c (handle_output_debug_string): Change type of n to
69 SIZE_T to avoid crash on 64 bit systems.
71 2013-03-17 Eli Zaretskii <eliz@gnu.org>
73 * python/python-internal.h (HAVE_SNPRINTF)
74 [_WIN32 && HAVE_DECL_SNPRINTF]: Define, to avoid compiler warnings
75 about redefinition of snprintf by pyerrors.h.
77 2013-03-15 Steve Ellcey <sellcey@mips.com>
79 * remote-sim.c (sim_command_completer): Make char arguments const.
81 2013-03-15 Tom Tromey <tromey@redhat.com>
84 * gdbtypes.c (types_equal): Handle TYPE_CODE_FUNC.
86 2013-03-14 Tom Tromey <tromey@redhat.com>
88 * gdb_bfd.c (struct gdb_bfd_data) <crc_computed, crc>:
90 (get_file_crc): Move from symfile.c.
91 (gdb_bfd_crc): New function.
92 * gdb_bfd.h (gdb_bfd_crc): Declare.
93 * objfiles.h (struct objfile) <crc32, crc32_p>: Remove.
94 * symfile.c (get_file_crc): Move to gdb_bfd.c.
95 (separate_debug_file_exists): Use gdb_bfd_crc.
97 2013-03-14 Tom Tromey <tromey@redhat.com>
99 * symfile.c (get_debug_link_info): Remove.
100 (find_separate_debug_file_by_debuglink): Use
101 bfd_get_debug_link_info.
103 2013-03-14 Tom Tromey <tromey@redhat.com>
105 * symtab.c (error_in_psymtab_expansion): New function.
106 (lookup_symbol_aux_quick)
107 (basic_lookup_transparent_type_quick): Remove "last resort"
108 code. Use error_in_psymtab_expansion.
110 2013-03-14 Doug Evans <dje@google.com>
111 Jan Kratochvil <jan.kratochvil@redhat.com>
113 * dwarf2read.c (dw2_map_symtabs_matching_filename): Put continue after
114 any successful compare_filenames_for_search or FILENAME_CMP.
115 * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
116 * symtab.c (iterate_over_some_symtabs): Likewise.
118 2013-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
120 * source.c (print_source_lines_base): Make a local copy of
123 2013-03-14 Hui Zhu <hui_zhu@mentor.com>
124 Jan Kratochvil <jan.kratochvil@redhat.com>
126 * source.c (print_source_lines_base): Suppress "file" for TUI.
128 2013-03-14 Keith Seitz <keiths@redhat.com>
129 Alan Matsuoka <alanm@redhat.com>
133 * cp-namespace.c (cp_lookup_nested_symbol): Handle TYPE_CODE_FUNC and
135 * elfread.c (elf_symtab_read): Handle BSF_GNU_UNIQUE for certain
138 2013-03-14 Yao Qi <yao@codesourcery.com>
140 * tracepoint.c (tfile_write_status): Write 'stop_desc' of trace
141 status to tfile if trace is stopped by command 'tstop'.
143 2013-03-14 Yao Qi <yao@codesourcery.com>
145 * tracepoint.c (tfile_write_status): Write trace notes and user
146 name into tfile if they are not NULL.
148 2013-03-14 Hui Zhu <hui@codesourcery.com>
149 Yao Qi <yao@codesourcery.com>
151 * Makefile.in (REMOTE_OBS): Add ctf.o.
153 (HFILES_NO_SRCDIR): Add ctf.h.
154 * ctf.c, ctf.h: New files.
155 * tracepoint.c: Include 'ctf.h'.
156 (collect_pseudocommand): Remove static.
157 (trace_save_command): Parse option "-ctf".
158 Produce different trace file writers per option.
159 Adjust output message.
160 (trace_save_tfile, trace_save_ctf): New.
161 * tracepoint.h (trace_save_tfile, trace_save_ctf): Declare.
162 * mi/mi-main.c: Include 'ctf.h'.
163 (mi_cmd_trace_save): Handle option '-ctf'. Call either
164 trace_save_tfile or trace_save_ctf.
165 * NEWS: Mention these changes.
167 2013-03-14 Yao Qi <yao@codesourcery.com>
169 * tracepoint.c (trace_file_writer_xfree): New.
170 (struct tfile_writer_data): New.
171 (tfile_dtor, tfile_can_target_save, tfile_start): New.
172 (tfile_write_header, tfile_write_regblock_type): New.
173 (tfile_write_status, tfile_write_uploaded_tsv): New.
174 (tfile_write_uploaded_tp, tfile_write_definition_end): New.
175 (tfile_write_raw_data, (tfile_end): New.
176 (tfile_write_ops): New global variable.
177 (TRACE_WRITE_R_BLOCK): New macro.
178 (TRACE_WRITE_M_BLOCK_HEADER): New macro.
179 (TRACE_WRITE_M_BLOCK_MEMORY): New macro.
180 (TRACE_WRITE_V_BLOCK): New macro.
181 (trace_save): Add extra one parameter WRITER. Make it static.
182 Use WRITER to writer trace.
183 (tfile_trace_file_writer_new): New.
184 (trace_save_command): Caller update.
185 (trace_save_tfile): Write trace data in TFILE format.
186 * tracepoint.h (struct trace_frame_write_ops): New.
187 (struct trace_file_write_ops): New.
188 (struct trace_file_writer): New.
189 (trace_save): Remove its declaration.
190 (trace_save_tfile): Declare it.
191 * mi/mi-main.c (mi_cmd_trace_save): Call trace_save_tfile
192 instead of trace_save.
194 2013-03-13 Pedro Alves <palves@redhat.com>
196 * hppa-hpux-nat.c (hppa_hpux_save_state_offset): Make static.
198 2013-03-13 Pedro Alves <palves@redhat.com>
200 * dbxread.c (read_ofile_symtab, process_one_symbol): Remove
202 * demangle.c (current_demangling_style_string): Make it const.
203 (set_demangling_command): Assert the demangling style is known.
204 Remove all handling of unknown styles. Set
205 'current_demangling_style_string' to an element of the
206 demangling_style_names array.
207 (set_demangling_style): Delete.
208 (_initialize_demangler): Set current_demangling_style_string to the
209 element of the demangling_style_names array that corresponds to
210 the default demangling style. Remove FIXME note. Don't call
211 set_demangling_style.
212 * gdb-demangle.h (set_demangling_style): Remove declaration.
214 2013-03-13 Pedro Alves <palves@redhat.com>
216 * ada-lang.c (struct add_partial_datum) <text, text0, word>: Make
218 (ada_make_symbol_completion_list): Make "text0" parameter const.
219 * ax-gdb.c (agent_eval_command_one): Make "exp" parameter const.
220 * breakpoint.c (condition_completer): Make "text" and "word"
221 parameters const. Adjust.
222 (check_tracepoint_command): Adjust to validate_actionline
224 (catch_syscall_completer): Make "text" and "word" parameters
226 * cli/cli-cmds.c (show_user): Make "comname" local const.
227 (valid_command_p): Make "command" parameter const.
228 (alias_command): Make "alias_prefix" and "command_prefix" locals
230 * cli/cli-decode.c (add_cmd): Make "name" parameter const.
231 (add_alias_cmd): Make "name" and "oldname" parameters const.
232 Adjust. No longer make copy of OLDNAME.
233 (add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd)
234 (add_setshow_cmd_full, add_setshow_enum_cmd)
235 (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
236 (add_setshow_filename_cmd, add_setshow_string_cmd)
237 (add_setshow_string_noescape_cmd)
238 (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
239 (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
240 (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd)
241 (delete_cmd, add_info, add_info_alias, add_com, add_com_alias):
242 Make "name" parameter const.
243 (help_cmd): Rename "command" parameter to "arg". New const local
245 (find_cmd): Make "command" parameter const.
246 (lookup_cmd_1): Make "text" parameter pointer to const. Adjust to
247 deprecated_cmd_warning prototype change.
248 (undef_cmd_error): Make "cmdtype" parameter const.
249 (lookup_cmd): Make "line" parameter const.
250 (deprecated_cmd_warning): Change type of "text" parameter to
251 pointer to const char, from pointer to pointer to char. Adjust.
252 (lookup_cmd_composition): Make "text" parameter const.
253 (complete_on_cmdlist, complete_on_enum): Make "text" and "word"
255 * cli/cli-decode.h (struct cmd_list_element) <name>: Make field
257 * cli/cli-script.c (validate_comname): Make "tem" local const.
258 (define_command): New const local "tem_c". Use it in calls to
260 (document_command): Make "tem" and "comfull" locals const.
261 (show_user_1): Make "prefix" and "name" parameters const.
262 * cli-script.h (show_user_1): Make "prefix" and "name" parameters
264 * command.h (add_cmd, add_alias_cmd, add_prefix_cmd)
265 (add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1)
266 (deprecated_cmd_warning, lookup_cmd_composition, add_com)
267 (add_com_alias, add_info, add_info_alias, complete_on_cmdlist)
268 (complete_on_enum, add_setshow_enum_cmd)
269 (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
270 (add_setshow_filename_cmd, add_setshow_string_cmd)
271 (add_setshow_string_noescape_cmd)
272 (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
273 (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
274 (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
275 Change prototypes, constifying strings.
276 * completer.c (noop_completer, filename_completer): Make "text"
277 and "prefix" parameters const.
278 (location_completer, expression_completer)
279 (complete_line_internal): Make "text" and "prefix" parameters
281 (command_completer, signal_completer): Make "text" and "prefix"
283 * completer.h (noop_completer, filename_completer)
284 (expression_completer, location_completer, command_completer)
285 (signal_completer): Change prototypes.
286 * corefile.c (complete_set_gnutarget): Make "text" and "word"
288 * cp-abi.c (cp_abi_completer): Likewise.
289 * expression.h (parse_expression_for_completion): Change
291 * f-lang.c (f_make_symbol_completion_list): Make "text" and "word"
293 * infcmd.c (_initialize_infcmd): Make "cmd_name" local const.
294 * infrun.c (handle_completer): Make "text" and "word" parameters
296 * interps.c (interpreter_completer): Make "text" and "word"
298 * language.h (struct language_defn)
299 <la_make_symbol_completion_list>: Make "text" and "word"
301 * parse.c (parse_exp_1): Move const hack to parse_exp_in_context.
302 (parse_exp_in_context): Rename to ...
303 (parse_exp_in_context_1): ... this.
304 (parse_exp_in_context): Reimplement, with const hack from
306 (parse_expression_for_completion): Make "string" parameter const.
307 * printcmd.c (decode_format): Make "string_ptr" parameter pointer
308 to pointer to const char. Adjust.
309 (print_command_1): Make "exp" parameter const.
310 (output_command): Rename to ...
311 (output_command_const): ... this. Make "exp" parameter const.
312 (output_command): Reimplement.
314 (display_command): Rename "exp" parameter to "arg". New "exp"
315 local, const version of "arg".
316 * python/py-auto-load.c (gdbpy_initialize_auto_load): Make
317 "cmd_name" local const.
318 * python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree
320 (cmdpy_completer): Make "text" and "word" parameters const.
321 (gdbpy_parse_command_name): Make "prefix_text2" local const.
322 * python/py-param.c (add_setshow_generic): Make "tmp_name" local
324 * remote.c (_initialize_remote): Make "cmd_name" local const.
325 * symtab.c (language_search_unquoted_string): Make "text" and "p"
326 parameters const. Adjust.
327 (completion_list_add_fields): Make "sym_text", "text" and "word"
329 (struct add_name_data) <sym_text, text, word>: Make fields const.
330 (default_make_symbol_completion_list_break_on): Make "text" and
331 "word" parameters const. Adjust locals.
332 (default_make_symbol_completion_list)
333 (make_symbol_completion_list, make_symbol_completion_type)
334 (make_symbol_completion_list_fn): Make "text" and "word"
336 (make_file_symbol_completion_list): Make "text", "word" and
337 "srcfile" parameters const. Adjust locals.
338 (add_filename_to_list): Make "text" and "word" parameters const.
339 (struct add_partial_filename_data) <text, word>: Make fields
341 (make_source_files_completion_list): Make "text" and "word"
343 * symtab.h (default_make_symbol_completion_list_break_on)
344 (default_make_symbol_completion_list, make_symbol_completion_list)
345 (make_symbol_completion_type enum type_code)
346 (make_symbol_completion_list_fn make_file_symbol_completion_list)
347 (make_source_files_completion_list): Change prototype.
348 * top.c (execute_command): Adjust to pass pointer to pointer to
349 const char to lookup_cmd, and to deprecated_cmd_warning prototype
351 (set_verbose): Make "cmdname" local const.
352 * tracepoint.c (decode_agent_options): Make "exp" parameter const,
354 (validate_actionline): Make "line" parameter a pointer to const
356 (encode_actions_1): Make "action_exp" local const, and adjust.
357 (encode_actions): Adjust.
358 (replace_comma): Delete.
359 (trace_dump_actions): Make "action_exp" and "next_comma" locals
360 const, and adjust. Don't frob the action string while splitting
361 it at commas. Instead, make a copy of each split substring in
363 (trace_dump_command): Adjust to validate_actionline prototype
365 * tracepoint.h (decode_agent_options, decode_agent_options)
366 (encode_actions, validate_actionline): Change prototypes.
367 * valprint.h (output_command): Delete declaration.
368 (output_command_const): Declare.
369 * value.c (function_destroyer): Cast const away in xfree call.
371 2013-03-13 Pedro Alves <palves@redhat.com>
373 * ada-lang.c (ada_decode_symbol): Cast away constness of GSYMBOL
374 rather than casting 'const char * const *' to 'const char **'.
375 * ada-lex.l (processInt): Make "trailer" local const. Remove
376 'const char **' cast.
377 * arm-linux-tdep.c (arm_stap_parse_special_token): Add 'char *'
378 locals, and use those as strtol output pointer, instead than doing
379 invalid casts to from 'const char **' to 'char **'.
380 (_initialize_demangle): Remove cast.
381 * i386-tdep.c (i386_stap_parse_special_token): : Add 'char *'
382 locals, and use those as strtol output pointer, instead than doing
383 invalid casts to from 'const char **' to 'char **'.
384 * solib-dsbt.c (dsbt_get_initial_loadmaps): Remove 'gdb_byte**'
386 * stap-probe.c (stap_parse_register_operand)
387 (stap_parse_single_operand): Likewise.
389 2013-03-13 Yao Qi <yao@codesourcery.com>
391 * tracepoint.c (tfile_get_trace_state_variable_value): Look for
392 the last matched 'V' blcok in trace frame.
394 2013-03-12 Joel Brobecker <brobecker@adacore.com>
396 * NEWS: Create a new section for the next release branch.
397 Rename the section of the current branch, now that it has
400 2013-03-12 Joel Brobecker <brobecker@adacore.com>
402 GDB 7.6 branch created (branch timestamp: 2013-03-12 22:15 UTC)
403 * version.in: Bump version to 7.6.50.20130312-cvs.
405 2013-03-12 Keith Seitz <keiths@redhat.com>
407 * mi/mi-cmds.h (mi_execute_command): Make "cmd" const.
408 * mi/mi-interp.c (mi_interpreter_exec): Make "command" const.
409 Remove temporary copy of input string.
410 (mi_execute_command_wrapper): Make "cmd" const.
411 * mi/mi-main.c (mi_execute_command): Make "string_ptr" const.
412 * mi/mi-parse.c (mi_parse_argv): Make "args" const.
414 (mi_parse): Make "cmd" const.
416 * mi/mi-parse.h (mi_parse): Make "cmd" const.
418 2013-03-12 Keith Seitz <keiths@redhat.com>
420 * ada-lang.c (ada_read_renaming_var_value): Pass const
421 pointer to expression string to parse_exp_1.
422 (create_excep_cond_exprs): Likewise.
423 * ax-gdb.c (agent_eval_command_one): Likewise.
424 (maint_agent_printf_command): Likewise.
425 Constify much of the string handling/parsing.
426 * breakpoint.c (set_breakpoint_condition): Pass const
427 pointer to expression string to parse_exp_1.
428 (update_watchpoint): Likewise.
429 (parse_cmd_to_aexpr): Constify string handling.
430 Pass const pointer to parse_exp_1.
431 (init_breakpoint_sal): Pass const pointer to parse_exp_1.
432 (find_condition_and_thread): Likewise.
434 (watch_command_1): Make "arg" const.
435 Constify string handling.
436 Copy the expression string instead of changing the input
438 (update_breakpoint_location): Pass const pointer to
440 * eval.c (parse_and_eval_address): Make "exp" const.
441 (parse_to_comma_and_eval): Make "expp" const.
442 (parse_and_eval): Make "exp" const.
443 * expression.h (parse_expression): Make argument const.
444 (parse_exp_1): Make first argument const.
445 * findcmd.c (parse_find_args): Treat "args" as const.
446 * linespec.c (parse_linespec): Pass const pointer to
447 linespec_expression_to_pc.
448 (linespec_expression_to_pc): Make "exp_ptr" const.
449 * parse.c (parse_exp_1): Make "stringptr" const.
450 Make a copy of the expression to pass to parse_exp_in_context until
451 this whole interface can be constified.
452 (parse_expression): Make "string" const.
453 * printcmd.c (ui_printf): Treat "arg" as const.
454 Handle const strings.
455 * tracepoint.c (validate_actionline): Pass const pointer to
456 all calls to parse_exp_1.
457 (encode_actions_1): Likewise.
458 * value.h (parse_to_comma_and_eval): Make argument const.
459 (parse_and_eval_address): Likewise.
460 (parse_and_eval): Likewise.
461 * varobj.c (varobj_create): Pass const pointer to parse_exp_1.
462 (varobj_set_value): Likewise.
463 * cli/cli-cmds.c (disassemble_command): Treat "arg" as const and
464 constify string handling.
465 Pass const pointers to parse_and_eval_address and
466 parse_to_comman_and_eval.
467 * cli/cli-utils.c (skip_to_space): Rename to ...
468 (skip_to_space_const): ... this. Handle const strings.
469 * cli/cli-utils.h (skip_to_space): Turn into macro which invokes
471 (skip_to_space_const): Declare.
472 * common/format.c (parse_format_string): Make "arg" const.
473 Handle const strings.
474 * common/format.h (parse_format_string): Make "arg" const.
475 * gdbserver/ax.c (ax_printf): Make "format" const.
476 * python/python.c (gdbpy_parse_and_eval): Do not make a copy
477 of the expression string.
479 2013-03-12 Hui Zhu <hui@codesourcery.com>
481 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Update error message.
483 2013-03-12 Yao Qi <yao@codesourcery.com>
484 Hui Zhu <hui@codesourcery.com>
486 * dwarf2loc.c (access_memory): Change nbits to nbytes in gdb_assert.
487 (dwarf2_compile_expr_to_ax): Call access_memory in DW_OP_deref and
490 2013-03-12 Paul Hilfinger <hilfingr@adacore.com>
492 * ada-lex.l (rules): Only recognize 'thread' as a
493 delimiter when followed by numerals, as for c-exp.y.
494 Use new rewind_to_char function to rewind the input for
495 expression-delimiting tokens.
496 (rewind_to_char): New function.
498 2013-03-11 Pedro Alves <palves@redhat.com>
499 Jan Kratochvil <jan.kratochvil@redhat.com>
501 * configure: Regenerate.
502 * configure.ac (check dynamic export flag): Link python test with
505 2013-03-11 Doug Evans <dje@google.com>
506 Keith Seitz <keiths@redhat.com>
508 * linespec.c (find_linespec_symbols): Call find_function_symbols
509 first, and then call lookup_prefix_sym/find_method.
511 2013-03-11 Pedro Alves <palves@redhat.com>
513 * charset.c (convert_between_encodings): Don't cast between
514 different pointer to pointer types. Instead, make the 'inp' local
515 be of the type iconv expects.
516 (wchar_iterate): Don't cast between different pointer to pointer
517 types. Instead, use new pointer local of the type iconv expects.
518 * target.c (target_read_stralloc, target_fileio_read_stralloc):
519 Add new local of type char pointer, and use it to get a
520 char/string view of the byte buffer, instead of casting between
521 pointer to pointer types.
523 2013-03-11 Hafiz Abid Qadeer <abidh@codesourcery.com>
525 * remote.c (remote_set_trace_buffer_size): Move != operator
526 to the start of next line to fix an ARI warning.
528 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
530 * NEWS: Add record changes.
532 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
534 * record-btrace.c (btrace_insn_history): Omit the pc prefix in
535 the instruction history disassembly.
536 * disasm.c (dump_insns): Omit the pc prefix, if requested.
537 * disasm.h (DISASSEMBLY_OMIT_PC): New.
539 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
541 * Makefile.in (SFILES): Add record-btrace.c
542 (COMMON_OBS): Add record-btrace.o
543 * record-btrace.c: New.
544 * objfiles.c: Include btrace.h.
545 (free_objfile): call btrace_free_objfile.
547 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
549 * target.c (target_call_history, target_call_history_from,
550 target_call_history_range): New.
551 * target.h (target_ops) <to_call_history, to_call_history_from,
552 to_call_history_range>: New fields.
553 (target_call_history, target_call_history_from,
554 target_call_history_range): New declaration.
555 * record.c (get_call_history_modifiers, cmd_record_call_history,
556 record_call_history_size): New.
557 (_initialize_record): Add the "record function-call-history" command.
558 Add "set/show record function-call-history-size" commands.
559 * record.h (record_print_flag): New.
561 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
563 * target.h (target_ops) <to_insn_history, to_insn_history_from,
564 to_insn_history_range>: New fields.
565 (target_insn_history): New.
566 (target_insn_history_from): New.
567 (target_insn_history_range): New.
568 * target.c (target_insn_history): New.
569 (target_insn_history_from): New.
570 (target_insn_history_range): New.
571 * record.c: Include cli/cli-utils.h, disasm.h, ctype.h.
572 (record_insn_history_size): New.
573 (get_insn_number): New.
574 (get_context_size): New.
576 (get_insn_history_modifiers): New.
577 (cmd_record_insn_history): New.
578 (_initialize_record): Add "set/show record instruction-history-size"
579 command. Add "record instruction-history" command.
581 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
583 * record.h (record_disconnect): New.
584 (record_detach): New.
585 (record_mourn_inferior): New.
587 * record-full.c (record_disconnect, record_detach,
588 record_mourn_inferior, record_kill): Move to...
592 (record_unpush): New.
593 (cmd_record_stop): Call record_stop. Replace unpush_target
594 call with record_unpush call.
595 (record_disconnect, record_detach): Assert that the target
596 is of record stratum. Call record_unpush, record_stop, and
598 (record_mourn_inferior, record_kill): Assert that the target
599 is of record stratum. Call record_unpush and DEBUG.
601 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
603 * record-full.h, record-full.c (record_memory_query): Rename
605 (record_full_memory_query): ...this. Update all users.
606 (record_arch_list_add_reg): Rename to ...
607 (record_full_arch_list_add_reg): ...this. Update all users.
608 (record_arch_list_add_mem): Rename to ...
609 (record_full_arch_list_add_mem): ...this. Update all users.
610 (record_arch_list_add_end): Rename to ...
611 (record_full_arch_list_add_end): ...this. Update all users.
612 (record_gdb_operation_disable_set): Rename to ...
613 (record_full_gdb_operation_disable_set): ...this.
616 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
618 * record-full.c (DEFAULT_RECORD_INSN_MAX_NUM): Renamed to ...
619 (DEFAULT_RECORD_FULL_INSN_MAX_NUM): ... this. Updated all users.
620 (RECORD_IS_REPLAY): Renamed to ...
621 (RECORD_FULL_IS_REPLAY): ... this. Updated all users.
622 (RECORD_FILE_MAGIC): Renamed to ...
623 (RECORD_FULL_FILE_MAGIC): ... this. Updated all users.
624 (record_mem_entry): Renamed to ...
625 (record_full_mem_entry): ... this. Updated all users.
626 (record_reg_entry): Renamed to ...
627 (record_full_reg_entry): ... this. Updated all users.
628 (record_end_entry): Renamed to ...
629 (record_full_end_entry): ... this. Updated all users.
630 (record_type) <record_end, record_reg, record_mem>: Renamed
632 (record_full_type) <record_full_end, record_full_reg,
633 record_full_mem>: ... this. Updated all users.
634 (record_entry): Renamed to ...
635 (record_full_entry): ... this. Updated all users.
636 (record_core_buf_entry): Renamed to ...
637 (record_full_core_buf_entry): ... this. Updated all users.
638 (record_core_regbuf): Renamed to ...
639 (record_full_core_regbuf): ... this. Updated all users.
640 (record_core_start): Renamed to ...
641 (record_full_core_start): ... this. Updated all users.
642 (record_core_end): Renamed to ...
643 (record_full_core_end): ... this. Updated all users.
644 (record_core_buf_list): Renamed to ...
645 (record_full_core_buf_list): ... this. Updated all users.
646 (record_first): Renamed to ...
647 (record_full_first): ... this. Updated all users.
648 (record_list): Renamed to ...
649 (record_full_list): ... this. Updated all users.
650 (record_arch_list_head): Renamed to ...
651 (record_full_arch_list_head): ... this. Updated all users.
652 (record_arch_list_tail): Renamed to ...
653 (record_full_arch_list_tail): ... this. Updated all users.
654 (record_stop_at_limit): Renamed to ...
655 (record_full_stop_at_limit): ... this. Updated all users.
656 (record_insn_max_num): Renamed to ...
657 (record_full_insn_max_num): ... this. Updated all users.
658 (record_insn_num): Renamed to ...
659 (record_full_insn_num): ... this. Updated all users.
660 (record_insn_count): Renamed to ...
661 (record_full_insn_count): ... this. Updated all users.
662 (record_ops): Renamed to ...
663 (record_full_ops): ... this. Updated all users.
664 (record_core_ops): Renamed to ...
665 (record_full_core_ops): ... this. Updated all users.
666 (set_record_cmdlist): Renamed to ...
667 (set_record_full_cmdlist): ... this. Updated all users.
668 (show_record_cmdlist): Renamed to ...
669 (show_record_full_cmdlist): ... this. Updated all users.
670 (record_cmdlist): Renamed to ...
671 (record_full_cmdlist): ... this. Updated all users.
672 (record_beneath_to_resume_ops): Renamed to ...
673 (record_full_beneath_to_resume_ops): ... this. Updated all users.
674 (record_beneath_to_resume): Renamed to ...
675 (record_full_beneath_to_resume): ... this. Updated all users.
676 (record_beneath_to_wait_ops): Renamed to ...
677 (record_full_beneath_to_wait_ops): ... this. Updated all users.
678 (record_beneath_to_wait): Renamed to ...
679 (record_full_beneath_to_wait): ... this. Updated all users.
680 (record_beneath_to_store_registers_ops): Renamed to ...
681 (record_full_beneath_to_store_registers_ops): ... this.
683 (record_beneath_to_store_registers): Renamed to ...
684 (record_full_beneath_to_store_registers): ... this.
686 (record_beneath_to_xfer_partial_ops): Renamed to ...
687 (record_full_beneath_to_xfer_partial_ops): ... this.
689 (record_beneath_to_xfer_partial): Renamed to ...
690 (record_full_beneath_to_xfer_partial): ... this.
692 (record_beneath_to_insert_breakpoint): Renamed to ...
693 (record_full_beneath_to_insert_breakpoint): ... this.
695 (record_beneath_to_stopped_by_watchpoint): Renamed to ...
696 (record_full_beneath_to_stopped_by_watchpoint): ... this.
698 (record_beneath_to_stopped_data_address): Renamed to ...
699 (record_full_beneath_to_stopped_data_address): ... this.
701 (record_beneath_to_async): Renamed to ...
702 (record_full_beneath_to_async): ... this. Updated all users.
703 (record_goto_insn): Renamed to ...
704 (record_full_goto_insn): ... this. Updated all users.
705 (record_save): Renamed to ...
706 (record_full_save): ... this. Updated all users.
707 (record_reg_alloc): Renamed to ...
708 (record_full_reg_alloc): ... this. Updated all users.
709 (record_reg_release): Renamed to ...
710 (record_full_reg_release): ... this. Updated all users.
711 (record_mem_alloc): Renamed to ...
712 (record_full_mem_alloc): ... this. Updated all users.
713 (record_mem_release): Renamed to ...
714 (record_full_mem_release): ... this. Updated all users.
715 (record_end_alloc): Renamed to ...
716 (record_full_end_alloc): ... this. Updated all users.
717 (record_end_release): Renamed to ...
718 (record_full_end_release): ... this. Updated all users.
719 (record_entry_release): Renamed to ...
720 (record_full_entry_release): ... this. Updated all users.
721 (record_list_release): Renamed to ...
722 (record_full_list_release): ... this. Updated all users.
723 (record_list_release_following): Renamed to ...
724 (record_full_list_release_following): ... this.
726 (record_list_release_first): Renamed to ...
727 (record_full_list_release_first): ... this. Updated all users.
728 (record_arch_list_add): Renamed to ...
729 (record_full_arch_list_add): ... this. Updated all users.
730 (record_get_loc): Renamed to ...
731 (record_full_get_loc): ... this. Updated all users.
732 (record_check_insn_num): Renamed to ...
733 (record_full_check_insn_num): ... this. Updated all users.
734 (record_arch_list_cleanups): Renamed to ...
735 (record_full_arch_list_cleanups): ... this. Updated all users.
736 (record_message): Renamed to ...
737 (record_full_message): ... this. Updated all users.
738 (record_message_wrapper): Renamed to ...
739 (record_full_message_wrapper): ... this. Updated all users.
740 (record_message_wrapper_safe): Renamed to ...
741 (record_full_message_wrapper_safe): ... this. Updated all users.
742 (record_gdb_operation_disable): Renamed to ...
743 (record_full_gdb_operation_disable): ... this. Updated all users.
744 (record_hw_watchpoint): Renamed to ...
745 (record_full_hw_watchpoint): ... this. Updated all users.
746 (record_exec_insn): Renamed to ...
747 (record_full_exec_insn): ... this. Updated all users.
748 (record_restore): Renamed to ...
749 (record_full_restore): ... this. Updated all users.
750 (record_async_inferior_event_token): Renamed to ...
751 (record_full_async_inferior_event_token): ... this.
753 (record_async_inferior_event_handler): Renamed to ...
754 (record_full_async_inferior_event_handler): ... this.
756 (record_core_open_1): Renamed to ...
757 (record_full_core_open_1): ... this. Updated all users.
758 (record_open_1): Renamed to ...
759 (record_full_open_1): ... this. Updated all users.
760 (record_open): Renamed to ...
761 (record_full_open): ... this. Updated all users.
762 (record_close): Renamed to ...
763 (record_full_close): ... this. Updated all users.
764 (record_resume_step): Renamed to ...
765 (record_full_resume_step): ... this. Updated all users.
766 (record_resumed): Renamed to ...
767 (record_full_resumed): ... this. Updated all users.
768 (record_execution_dir): Renamed to ...
769 (record_full_execution_dir): ... this. Updated all users.
770 (record_resume): Renamed to ...
771 (record_full_resume): ... this. Updated all users.
772 (record_get_sig): Renamed to ...
773 (record_full_get_sig): ... this. Updated all users.
774 (record_sig_handler): Renamed to ...
775 (record_full_sig_handler): ... this. Updated all users.
776 (record_wait_cleanups): Renamed to ...
777 (record_full_wait_cleanups): ... this. Updated all users.
778 (record_wait_1): Renamed to ...
779 (record_full_wait_1): ... this. Updated all users.
780 (record_wait): Renamed to ...
781 (record_full_wait): ... this. Updated all users.
782 (record_stopped_by_watchpoint): Renamed to ...
783 (record_full_stopped_by_watchpoint): ... this. Updated all users.
784 (record_disconnect): Renamed to ...
785 (record_full_disconnect): ... this. Updated all users.
786 (record_detach): Renamed to ...
787 (record_full_detach): ... this. Updated all users.
788 (record_mourn_inferior): Renamed to ...
789 (record_full_mourn_inferior): ... this. Updated all users.
790 (record_kill): Renamed to ...
791 (record_full_kill): ... this. Updated all users.
792 (record_stopped_data_address): Renamed to ...
793 (record_full_stopped_data_address): ... this. Updated all users.
794 (record_registers_change): Renamed to ...
795 (record_full_registers_change): ... this. Updated all users.
796 (record_store_registers): Renamed to ...
797 (record_full_store_registers): ... this. Updated all users.
798 (record_xfer_partial): Renamed to ...
799 (record_full_xfer_partial): ... this. Updated all users.
800 (record_breakpoint): Renamed to ...
801 (record_full_breakpoint): ... this. Updated all users.
802 (record_breakpoint_p): Renamed to ...
803 (record_full_breakpoint_p): ... this. Updated all users.
804 (record_breakpoints): Renamed to ...
805 (record_full_breakpoints): ... this. Updated all users.
806 (record_sync_record_breakpoints): Renamed to ...
807 (record_full_sync_record_breakpoints): ... this.
809 (record_init_record_breakpoints): Renamed to ...
810 (record_full_init_record_breakpoints): ... this.
812 (record_insert_breakpoint): Renamed to ...
813 (record_full_insert_breakpoint): ... this. Updated all users.
814 (record_remove_breakpoint): Renamed to ...
815 (record_full_remove_breakpoint): ... this. Updated all users.
816 (record_can_execute_reverse): Renamed to ...
817 (record_full_can_execute_reverse): ... this. Updated all users.
818 (record_get_bookmark): Renamed to ...
819 (record_full_get_bookmark): ... this. Updated all users.
820 (record_goto_bookmark): Renamed to ...
821 (record_full_goto_bookmark): ... this. Updated all users.
822 (record_async): Renamed to ...
823 (record_full_async): ... this. Updated all users.
824 (record_can_async_p): Renamed to ...
825 (record_full_can_async_p): ... this. Updated all users.
826 (record_is_async_p): Renamed to ...
827 (record_full_is_async_p): ... this. Updated all users.
828 (record_execution_direction): Renamed to ...
829 (record_full_execution_direction): ... this. Updated all users.
830 (record_info): Renamed to ...
831 (record_full_info): ... this. Updated all users.
832 (record_delete): Renamed to ...
833 (record_full_delete): ... this. Updated all users.
834 (record_is_replaying): Renamed to ...
835 (record_full_is_replaying): ... this. Updated all users.
836 (record_goto_entry): Renamed to ...
837 (record_full_goto_entry): ... this. Updated all users.
838 (record_goto_begin): Renamed to ...
839 (record_full_goto_begin): ... this. Updated all users.
840 (record_goto_end): Renamed to ...
841 (record_full_goto_end): ... this. Updated all users.
842 (record_goto): Renamed to ...
843 (record_full_goto): ... this. Updated all users.
844 (init_record_ops): Renamed to ...
845 (init_record_full_ops): ... this. Updated all users.
846 (record_core_resume): Renamed to ...
847 (record_full_core_resume): ... this. Updated all users.
848 (record_core_kill): Renamed to ...
849 (record_full_core_kill): ... this. Updated all users.
850 (record_core_fetch_registers): Renamed to ...
851 (record_full_core_fetch_registers): ... this. Updated all users.
852 (record_core_prepare_to_store): Renamed to ...
853 (record_full_core_prepare_to_store): ... this. Updated all users.
854 (record_core_store_registers): Renamed to ...
855 (record_full_core_store_registers): ... this. Updated all users.
856 (record_core_xfer_partial): Renamed to ...
857 (record_full_core_xfer_partial): ... this. Updated all users.
858 (record_core_insert_breakpoint): Renamed to ...
859 (record_full_core_insert_breakpoint): ... this. Updated all users.
860 (record_core_remove_breakpoint): Renamed to ...
861 (record_full_core_remove_breakpoint): ... this. Updated all users.
862 (record_core_has_execution): Renamed to ...
863 (record_full_core_has_execution): ... this. Updated all users.
864 (init_record_core_ops): Renamed to ...
865 (init_record_full_core_ops): ... this. Updated all users.
866 (cmd_record_restore): Renamed to ...
867 (cmd_record_full_restore): ... this. Updated all users.
868 (record_save_cleanups): Renamed to ...
869 (record_full_save_cleanups): ... this. Updated all users.
870 (cmd_record_start): Renamed to ...
871 (cmd_record_full_start): ... this. Updated all users.
872 (set_record_insn_max_num): Renamed to ...
873 (set_record_full_insn_max_num): ... this. Updated all users.
874 (set_record_command): Renamed to ...
875 (set_record_full_command): ... this. Updated all users.
876 (show_record_command): Renamed to ...
877 (show_record_full_command): ... this. Updated all users.
878 (_initialize_record): Renamed to ...
879 (_initialize_record_full): ... this. Updated all users.
881 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
883 * record.h: Split into this and ...
884 * record-full.h: ... this.
885 * record.c: Split into this and ...
886 * record-full.c: ... this.
887 * target.h (target_ops): Add new fields to_info_record,
888 to_save_record, to_delete_record, to_record_is_replaying,
889 to_goto_record_begin, to_goto_record_end, to_goto_record.
890 (target_info_record): New.
891 (target_save_record): New.
892 (target_supports_delete_record): New.
893 (target_delete_record): New.
894 (target_record_is_replaying): New.
895 (target_goto_record_begin): New.
896 (target_goto_record_end): New.
897 (target_goto_record): New.
898 * target.c (target_info_record): New.
899 (target_save_record): New.
900 (target_supports_delete_record): New.
901 (target_delete_record): New.
902 (target_record_is_replaying): New.
903 (target_goto_record_begin): New.
904 (target_goto_record_end): New.
905 (target_goto_record): New.
906 * record.h: Declare struct cmd_list_element.
907 (record_cmdlist): New declaration.
908 (set_record_cmdlist): New declaration.
909 (show_record_cmdlist): New declaration.
910 (info_record_cmdlist): New declaration.
911 (cmd_record_goto): New declaration.
912 * record.c: Remove unnecessary includes.
914 (cmd_record_goto): Remove declaration.
915 (record_cmdlist): Now extern. Initialize.
916 (set_record_cmdlist): Now extern. Initialize.
917 (show_record_cmdlist): Now extern. Initialize.
918 (info_record_cmdlist): Now extern. Initialize.
919 (find_record_target): New.
920 (require_record_target): New.
921 (cmd_record_start): Update.
922 (cmd_record_delete): Remove target-specific code.
923 Call target_delete_record.
924 (cmd_record_stop): Unpush any record target.
925 (set_record_insn_max_num): Move to record-full.c
926 (set_record_command): Add comment.
927 (show_record_command): Add comment.
928 (info_record_command): Update comment.
929 Remove target-specific code.
930 Call the record target's to_info_record.
931 (cmd_record_start): New.
932 (cmd_record_goto): Now extern.
933 Remove target-specific code.
934 Call target_goto_begin, target_goto_end, or target_goto.
935 (_initialize_record): Move record target ops initialization to
937 Change "record" command help text.
938 Move "record restore", "record set", and "record show" commands to
940 * Makefile.in (SFILES): Add record-full.c.
941 (HFILES_NO_SRCDIR): Add record-full.h.
942 (COMMON_OBS): Add record-full.o.
943 * amd64-linux-tdep.c: Include record-full.h instead of record.h.
944 * arm-tdep.c: Include record-full.h.
945 * i386-linux-tdep.c: Include record-full.h instead of record.h.
946 * i386-tdep.c: Include record-full.h.
947 * infrun.c: Include record-full.h.
948 * linux-record.c: Include record-full.h.
949 * moxie-tdep.c: Include record-full.h.
950 * record-full.c: Include record-full.h.
951 Change module comment.
952 (set_record_full_cmdlist): New.
953 (show_record_full_cmdlist): New.
954 (record_full_cmdlist): New.
955 (record_goto_insn): New declaration.
956 (record_save): New declaration.
957 (record_check_insn_num): Change query string.
959 (record_delete): New.
960 (record_is_replaying): New.
961 (record_goto_entry): New.
962 (record_goto_begin): New.
963 (record_goto_end): New.
965 (init_record_ops): Update.
966 (init_record_core_ops): Update.
967 (cmd_record_save): Rename to record_save. Remove target and arg checks.
968 (cmd_record_start): New.
969 (set_record_insn_max_num): Moved from record.c
970 (set_record_full_command): New.
971 (show_record_full_command): New.
972 (_initialize_record_full): New.
974 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
976 * target.h (add_deprecated_target_alias): New.
977 * target.c (add_deprecated_target_alias): New.
979 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
981 * common/linux-btrace.c: Include sys/ptrace, sys/types, sys/wait.h,
983 (linux_supports_btrace): Add kernel and
985 (kernel_supports_btrace): New function.
986 (cpu_supports_btrace): New function.
987 (intel_supports_btrace): New function.
989 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
991 * target.h (enum target_object): Add TARGET_OBJECT_BTRACE.
992 * remote.c: Include btrace.h.
993 (struct btrace_target_info): New struct.
994 (remote_supports_btrace): New function.
995 (send_Qbtrace): New function.
996 (remote_enable_btrace): New function.
997 (remote_disable_btrace): New function.
998 (remote_teardown_btrace): New function.
999 (remote_read_btrace): New function.
1000 (init_remote_ops): Add btrace ops.
1001 (enum <unnamed>): Add btrace packets.
1002 (struct protocol_feature remote_protocol_features[]): Add btrace packets.
1003 (_initialize_remote): Add packet configuration for branch tracing.
1005 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1007 * features/btrace.dtd: New file.
1008 * Makefile.in (XMLFILES): Add btrace.dtd.
1009 * btrace.h (parse_xml_btrace): New declaration.
1010 * btrace.c: Include xml-support.h.
1011 (parse_xml_btrace): New function.
1012 (parse_xml_btrace_block): New function.
1013 (block_attributes): New struct.
1014 (btrace_attributes): New struct.
1015 (btrace_children): New struct.
1016 (btrace_elements): New struct.
1018 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1020 * amd64-linux-nat.c: Include btrace.h and linux-btrace.h.
1021 (amd64_linux_enable_btrace): New.
1022 (amd64_linux_disable_btrace): New.
1023 (amd64_linux_teardown_btrace): New.
1024 (_initialize_amd64_linux_nat): Initialize btrace ops.
1025 * i386-linux.nat.c: Include btrace.h and linux-btrace.h.
1026 (i386_linux_enable_btrace): New.
1027 (i386_linux_disable_btrace): New.
1028 (i386_linux_teardown_btrace): New.
1029 (_initialize_i386_linux_nat): Initialize btrace ops.
1030 * config/i386/linux.mh: Add linux-btrace.o.
1031 * config/i386/linux64.mh: Add linux-btrace.o.
1033 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1035 * common/linux_btrace.h: New file.
1036 * common/linux_btrace.c: New file.
1037 * Makefile.in (SFILES): Add btrace.c.
1038 (HFILES_NO_SRCDIR): Add common/linux-btrace.h.
1039 (COMMON_OBS): Add btrace.o.
1040 (linux-btrace.o): New rule.
1042 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1044 * target.h: Include btrace.h.
1045 (struct target_ops) <to_supports_btrace, to_enable_btrace,
1046 to_disable_btrace, to_teardown_btrace, to_read_btrace>: New.
1047 * target.c (target_supports_btrace): New function.
1048 (target_enable_btrace): New function.
1049 (target_disable_btrace): New function.
1050 (target_teardown_btrace): New function.
1051 (target_read_btrace): New function.
1052 * btrace.h: New file.
1053 * btrace.c: New file.
1054 * Makefile.in: Add btrace.c.
1055 * gdbthread.h: Include btrace.h.
1056 (struct thread_info): Add btrace field.
1057 * thread.c: Include btrace.h.
1058 (clear_thread_inferior_resources): Call target_teardown_btrace.
1059 * common/btrace-common.h: New file.
1061 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1063 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Call also kill
1064 for CHILD, ignore PTRACE_KILL errors, move the inner block variable
1065 kill_status to outer block.
1067 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1069 Fix entry-values if the callee called a noreturn function.
1070 * dwarf2-frame-tailcall.c (dwarf2_tailcall_sniffer_first): Use
1071 get_frame_address_in_block. Add new comment.
1073 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1075 Fix entry-values in C++ across CUs.
1076 * dwarf2loc.c (call_site_to_target_addr) <FIELD_LOC_KIND_PHYSNAME>: Use
1077 lookup_minimal_symbol. Add a comment.
1079 (read_call_site_scope) <is_ref_attr> <die_is_declaration>: Prefer
1082 2013-03-08 Yao Qi <yao@codesourcery.com>
1084 * tracepoint.c (_initialize_tracepoint): Indent the code.
1086 2013-03-08 Pedro Alves <palves@redhat.com>
1088 * findcmd.c (put_bits): Change type of parameter to 'gdb_byte *'.
1089 (parse_find_args, find_command): Change type of pattern buffer
1090 locals to 'gdb_byte *'.
1092 2013-03-08 Stan Shebs <stan@codesourcery.com>
1093 Hafiz Abid Qadeer <abidh@codesourcery.com>
1095 * NEWS: Mention set and show trace-buffer-size commands.
1097 * target.h (struct target_ops): New method
1098 to_set_trace_buffer_size.
1099 (target_set_trace_buffer_size): New macro.
1100 * target.c (update_current_target): Set up new method.
1101 * tracepoint.c (trace_buffer_size): New global.
1102 (start_tracing): Send it to the target.
1103 (set_trace_buffer_size): New function.
1104 (_initialize_tracepoint): Add new setshow for trace-buffer-size.
1105 * remote.c (remote_set_trace_buffer_size): New function.
1106 (_initialize_remote): Use it.
1107 (QTBuffer:size) New remote command.
1108 (PACKET_QTBuffer_size): New enum.
1109 (remote_protocol_features): Add an entry for
1110 PACKET_QTBuffer_size.
1112 2013-03-08 Tom Tromey <tromey@redhat.com>
1114 * remote-m32r-sdi.c (m32r_load): Call skip_spaces on correct
1117 2013-03-07 Pedro Alves <palves@redhat.com>
1119 * target.c (target_read_stralloc, target_fileio_read_alloc):
1120 *Cast pointer to 'gdb_byte *' in target call.
1122 2013-03-07 Pedro Alves <palves@redhat.com>
1124 * corefile.c (read_memory_string): Cast pointer to gdb_byte* in
1127 2013-03-07 Keith Seitz <keiths@redhat.com>
1129 * breakpoint.c (catch_syscall_split_args): Use skip_spaces.
1130 (trace_pass_command): Likewise.
1131 * cli/cli-cmds.c: Include cli/cli-utils.h.
1132 (source_command): Use skip-spaces.
1133 (disassemble_command): Likewise.
1134 * findcmd.c: Include cli/cli-utils.h.
1135 (parse_find_args): Use skip_spaces.
1136 * go32-nat.c: Include cli/cli-utils.h.
1137 (go32_sldt): Use skip_spaces.
1138 (go32_sgdt): Likewise.
1139 (go32_sidt): Likewise.
1140 (go32_pde): Likewise.
1141 (go32_pte): Likewise.
1142 (go32_pte_for_address): Likewise.
1143 * infcmd.c: Include cli/cli-utils.h.
1144 (registers_info): Use skip_spaces.
1145 * linux-tdep.c (read_mapping): Use skip_spaces_const.
1146 (linux_info_proc): Likewise.
1147 * linux-thread-db.c: Include cli/cli-utils.h.
1148 (info_auto_load_libthread_db): Use skip_spaces_const.
1149 * m32r-rom.c: Include cli/cli-utils.h.
1150 (m32r_upload_command): Use skip_spaces.
1151 * maint.c: Include cli/cli-utils.h.
1152 (maintenance_translate_address): Use skip_spaces.
1153 * mi/mi-parse.c: Include cli/cli-utils.h.
1154 (mi_parse_argv): Use skip_spaces.
1155 (mi_parse): Likewise.
1156 * minsyms.c: Include cli/cli-utils.h.
1157 (msymbol_hash_iw): Use skip_spaces_const.
1158 * objc-lang.c: Include cli/cli-utils.h.
1159 (parse_selector): Use skip_spaces.
1160 (parse_method): Likewise.
1161 * python/python.c: Include cli/cli-utils.h.
1162 (python_interactive_command)[HAVE_PYTHON]: Use skip_spaces.
1163 (python_command)[HAVE_PYTHON]: Likewise.
1164 (python_interactive_command)[!HAVE_PYTHON]: Likewise.
1165 * remote-m32r-sdi.c: Include cli/cli-utils.h.
1166 (m32r_load): Use skip_spaces.
1167 * serial.c: Include cli/cli-utils.h.
1168 (serial_open): Use skip_spaces_const.
1169 * stack.c: Include cli/cli-utils.h.
1170 (parse_frame_specification_1): Use skip_spaces_const.
1171 * symfile.c: Include cli/cli-utils.h.
1172 (set_ext_lang_command): Use skip_spaces.
1173 * symtab.c: Include cli/cli-utils.h.
1174 (rbreak_command): Use skip_spaces.
1175 * thread.c (thread_name_command): Use skip_spaces.
1176 * tracepoint.c (validate_actionline): Use skip_spaces.
1177 (encode_actions_1): Likewise.
1178 (trace_find_range_command): Likewise.
1179 (trace_find_outside_command): Likewise.
1180 (trace_dump_actions): Likewise.
1182 2013-03-07 Pedro Alves <palves@redhat.com>
1184 * c-lang.c (parse_one_string): Cast argument to gdb_byte *.
1185 * expprint.c (print_subexp_standard): Likewise.
1186 * utils.c (host_char_to_target): Likewise.
1187 * valprint.c (generic_emit_char, generic_printstr): Likewise.
1188 * varobj.c (value_get_print_value): Change type of local to char*.
1189 Cast it gdb_byte * in call to language printer.
1191 2013-03-07 Pedro Alves <palves@redhat.com>
1193 * charset.c (struct wchar_iterator) <input>: Change type to 'const
1195 (make_wchar_iterator): Remove cast to char*.
1196 (wchar_iterate): Change type of local.
1198 2013-03-07 Pedro Alves <palves@redhat.com>
1200 * regcache.c (regcache_xmalloc_1): Call XCALLOC with signed char
1201 for 'regcache->register_status'.
1203 2013-03-07 Pedro Alves <palves@redhat.com>
1205 * breakpoint.c (breakpoint_xfer_memory): Change type of local to
1208 2013-03-07 Pedro Alves <palves@redhat.com>
1210 * stap-probe.c (handle_stap_probe): Add cast to char*.
1212 2013-03-07 Pedro Alves <palves@redhat.com>
1214 * linux-record.c (record_linux_system_call) <gdb_sys_msgrcv,
1215 RECORD_MSGRCV>: Pass a signed variable to
1216 regcache_raw_read_signed, instead of an unsigned one.
1218 2013-03-07 Pedro Alves <palves@redhat.com>
1220 * remote-notif.c (notif_debug): Change type to int.
1221 * remote-notif.h (notif_debug): Likewise.
1223 2013-03-07 Pedro Alves <palves@redhat.com>
1225 * ser-tcp.c (tcp_retry_limit): Change type to unsigned int.
1227 2013-03-07 Pedro Alves <palves@redhat.com>
1229 * remote.c (hex2bin, bin2hex): Move extern declarations to ...
1230 * remote.h (hex2bin, bin2hex): ... here.
1231 * tracepoint.c (hex2bin, bin2hex): Remove extern declarations.
1233 2013-03-07 Eli Zaretskii <eliz@gnu.org>
1235 * utils.c (initialize_utils): Improve doc strings of "set/show
1236 width", "set/show height", and "set/show pagination".
1238 2013-03-06 Keith Seitz <keiths@redhat.com>
1240 * ax-gdb.c (gen_printf): Make FORMAT const.
1241 * ax-gdb.h (gen_printf): Likewise.
1242 * ax-general.c (ax_string): Make STR const.
1243 * ax.h (ax_string): Likewise.
1245 2013-03-06 Doug Evans <dje@google.com>
1247 * elfread.c (elf_symfile_read): Move debugging printf to more
1250 2013-03-06 Pedro Alves <palves@redhat.com>
1252 * python/py-utils.c (target_string_to_unicode): Delete function.
1253 * python/python-internal.h (target_string_to_unicode): Delete
1256 2013-03-06 Pierre Muller <muller@sourceware.org>
1258 * linespec.c (get_current_search_block): ARI fix, use (void)
1259 for empty parameter list.
1261 2013-03-05 Doug Evans <dje@google.com>
1263 * ada-lang.c (ada_lookup_symbol_list_worker): New function, contents
1264 of old ada_lookup_symbol_list. In !full_search case, don't
1266 (ada_lookup_symbol_list): Delete arg full_search, all callers
1267 updated. Call ada_lookup_symbol_list_worker.
1268 (ada_iterate_over_symbols): Call ada_lookup_symbol_list_worker.
1269 * ada-lang.h (ada_lookup_symbol_list): Update.
1270 * language.h (language_defn): Update comment for
1271 la_iterate_over_symbols.
1272 * linespec.c (iterate_over_file_blocks): New function.
1273 (iterate_over_all_matching_symtabs): Call it.
1274 (lookup_prefix_sym): Ditto.
1275 (get_current_search_block): New function.
1276 (get_search_block): Delete.
1277 (find_label_symbols): Call get_current_search_block.
1278 (add_matching_symbols_to_info): Call iterate_over_file_blocks.
1279 * symtab.c (iterate_over_symbols): Don't search superblocks.
1281 2013-03-05 Yao Qi <yao@codesourcery.com>
1283 * cli/cli-decode.c (add_setshow_zuinteger_unlimited_cmd): Change
1284 parameter VAR's type from "unsigned int" to "int".
1285 * command.h (var_zuinteger_unlimited): Update its comments.
1286 (add_setshow_zuinteger_unlimited_cmd): Update the declaration.
1288 2013-03-05 Corinna Vinschen <vinschen@redhat.de>
1290 * NEWS: Mention new target x86_64-*-cygwin*.
1292 2013-03-05 Corinna Vinschen <vinschen@redhat.de>
1294 * configure.host: Add x86_64-*-cygwin* as host.
1295 * configure.tgt: Add x86_64-*-cygwin* as target.
1296 * config/i386/cygwin64.mh: New file.
1298 2013-03-04 Jan Kratochvil <jan.kratochvil@redhat.com>
1300 * linespec.c (decode_line_2): Fix duplicate request off by two message.
1302 2013-03-04 Jan Kratochvil <jan.kratochvil@redhat.com>
1304 * linespec.c (struct linespec_canonical_name): New.
1305 (struct linespec_state): Change canonical_names type to it.
1306 (add_sal_to_sals): Change variable canonical_name to canonical. Change
1307 xrealloc element size. Initialize the different CANONICAL fields.
1308 (canonical_to_fullform): New.
1309 (filter_results): Use it. Add variables canonical, fullform and
1311 (struct decode_line_2_item, decode_line_2_compare_items): New.
1312 (decode_line_2): Remove variables iter and item_names, add variables
1313 items and items_count. Modify the code for these new variables.
1315 2013-03-04 Corinna Vinschen <vinschen@redhat.com>
1317 * coff-pe-read.c (read_pe_exported_syms): Don't return without
1320 2013-03-04 Luis Machado <lgustavo@codesourcery.com>
1322 * tracepoint.c (build_traceframe_info): Add code for byte order.
1324 2013-03-02 Kevin Buettner <kevinb@redhat.com>
1326 * v850-tdep.c: (v850e2_register_name): Revise system register
1327 names to match current V850E2M architecture specifications.
1328 Update register number enum comments too.
1330 2013-03-01 Jiong Wang <jiwang@tilera.com>
1331 Pedro Alves <palves@redhat.com>
1333 * tilegx-tdep.c (tilegx_analyze_prologue): Limit bundle reading
1335 (tilegx_skip_prologue): Limit prologue analysis to section end.
1337 2013-03-01 Jan Kratochvil <jan.kratochvil@redhat.com>
1339 * dwarf2loc.c (call_site_find_chain_1): New variable save_callee_pc,
1342 2013-03-01 Pedro Alves <palves@redhat.com>
1344 Use gdb_byte for bytes from the program being debugged.
1346 * arm-tdep.c (arm_store_return_value, arm_get_longjmp_target):
1347 Change type of local 'buf' to gdb_byte.
1348 * avr-tdep.c (avr_frame_prev_register, avr_push_dummy_call): Likewise.
1349 * bfin-tdep.c (bfin_push_dummy_call): Likewise.
1350 * cris-tdep.c (cris_sigcontext_addr)
1351 (cris_sigtramp_frame_unwind_cache): Likewise.
1352 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp)
1353 (frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
1355 * frv-tdep.c (frv_pseudo_register_write, frv_analyze_prologue): Likewise.
1356 * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer)
1357 (hppa32_hpux_search_dummy_call_sequence)
1358 (hppa_hpux_supply_save_state): Likewise.
1359 * hppa-linux-tdep.c (insns_match_pattern)
1360 (hppa_linux_find_global_pointer): Likewise.
1361 * hppa-tdep.c (hppa_in_function_epilogue_p)
1362 (skip_prologue_hard_way, hppa_frame_cache): Likewise.
1363 * i386-nto-tdep.c (i386nto_sigcontext_addr): Likewise.
1364 * i386fbsd-tdep.c (i386fbsd_supply_uthread)
1365 (i386fbsd_collect_uthread): Likewise.
1366 * ia64-hpux-tdep.c (ia64_hpux_push_dummy_code): Likewise.
1367 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Likewise.
1368 * ia64-tdep.c (examine_prologue, ia64_frame_cache)
1369 (ia64_frame_prev_register, ia64_sigtramp_frame_cache)
1370 (ia64_sigtramp_frame_prev_register, ia64_access_reg)
1371 (ia64_access_rse_reg, ia64_libunwind_frame_this_id)
1372 (ia64_libunwind_frame_prev_register)
1373 (ia64_libunwind_sigtramp_frame_this_id)
1374 (ia64_find_global_pointer_from_dynamic_section)
1375 (find_extant_func_descr, find_func_descr, ia64_dummy_id)
1376 (ia64_unwind_pc): Likewise.
1377 * iq2000-tdep.c (iq2000_store_return_value): Likewise.
1378 * m68hc11-tdep.c (m68hc11_push_dummy_call)
1379 (m68hc11_extract_return_value): Likewise.
1380 * m68klinux-nat.c (fetch_register, store_register): Likewise.
1381 * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_cr32_write)
1382 (mep_get_insn, mep_push_dummy_call): Likewise.
1383 * mips-linux-tdep.c (mips_linux_get_longjmp_target)
1384 (mips_linux_in_dynsym_stub): Likewise.
1385 * mn10300-tdep.c (mep_pseudo_cr32_write): Likewise.
1386 * ppc-linux-nat.c (fetch_register, store_register): Likewise.
1387 * regcache.c (dump_endian_bytes): Change type of parameter 'buf'
1389 * remote-mips.c (mips_set_register): Likewise.
1390 * remote-sim.c (gdbsim_fetch_register): Likewise.
1391 * score-tdep.c (score7_fetch_inst): Change type of parameter
1392 'memblock' and local 'buf' to gdb_byte.
1393 (score7_malloc_and_get_memblock): Change return type to gdb_byte.
1394 Change type of local 'buf' to gdb_byte. Adjust.
1395 (score7_adjust_memblock_ptr): Change type of parameter 'memblock'
1397 (score7_analyze_prologue): Change type of 'memblock' and
1398 'memblock_ptr' locals to gdb_byte*.
1399 * sh64-tdep.c (sh64_extract_return_value)
1400 (sh64_store_return_value): Change type of local 'buf' to gdb_byte.
1401 * solib-darwin.c (darwin_current_sos, darwin_read_exec_load_addr):
1402 * solib-pa64.c (pa64_solib_create_inferior_hook)
1403 (pa64_open_symbol_file_object): Remove local 'buf'.
1404 * solib-som.c (som_solib_create_inferior_hook, link_map_start)
1405 (som_open_symbol_file_object): Likewise.
1406 * solib-spu.c (spu_current_sos): Likewise.
1407 * spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
1408 * spu-multiarch.c (parse_spufs_run, spu_fetch_registers)
1409 (spu_store_registers): Likewise.
1410 * target.c (debug_print_register): Likewise.
1411 * tic6x-tdep.c (tic6x_get_longjmp_target): Likewise.
1412 * xstormy16-tdep.c (xstormy16_store_return_value)
1413 (xstormy16_push_dummy_call, xstormy16_resolve_jmp_table_entry)
1414 (xstormy16_find_jmp_table_entry): Likewise.
1416 2013-03-01 Jiong Wang <jiwang@tilera.com>
1418 * tilegx-tdep.c (tilegx_get_longjmp_target): New function.
1419 (tilegx_gdbarch_init): Install it.
1421 2013-02-28 Tom Tromey <tromey@redhat.com>
1423 * python/py-arch.c (archpy_disassemble): Use PyInt_Check and
1426 2013-02-28 Doug Evans <dje@google.com>
1428 * python/py-finishbreakpoint.c (bpfinishpy_init): gcc -Wall lint.
1429 * python/python.c (gdbpy_find_pc_line): Ditto.
1431 2013-02-28 Tom Tromey <tromey@redhat.com>
1433 * contrib/excheck.py: New file.
1434 * contrib/exsummary.py: New file.
1435 * contrib/gcc-with-excheck: New file.
1437 2013-02-28 Tom Tromey <tromey@redhat.com>
1439 * python/python.c (gdbpy_print_stack): Call begin_line and
1440 fprintf_filtered inside TRY_CATCH.
1442 2013-02-28 Tom Tromey <tromey@redhat.com>
1444 * python/python.c (gdbpy_find_pc_line): Call find_pc_line
1447 2013-02-28 Tom Tromey <tromey@redhat.com>
1449 * py-finishbreakpoint.c (bpfinishpy_init): Reorganize to call
1450 frame_object_to_frame_info inside TRY_CATCH.
1452 2013-02-28 Tom Tromey <tromey@redhat.com>
1454 * py-block.c (gdbpy_block_for_pc): Call block_for_pc inside
1457 2013-02-28 Tom Tromey <tromey@redhat.com>
1459 * objfiles.h (ALL_PSPACE_OBJFILES): Remove trailing backlash.
1461 2013-02-27 Corinna Vinschen <vinschen@redhat.com>
1463 * windows-nat.c: Throughout, fix format strings and casts of
1464 printf-like functions to avoid type related warnings on all
1466 (handle_output_debug_string): Fetch context information address
1467 from debug string using string_to_core_addr.
1469 2013-02-27 Jiong Wang <jiwang@tilera.com>
1471 * regformats/reg-tilegx.dat (name): Change abi name to "tilegx".
1472 * regformats/reg-tilegx32.dat: New.
1474 2013-02-27 Jiong Wang <jiwang@tilera.com>
1476 * configure.tgt (tilegx-*-linux*): Enable gdbserver.
1478 2013-02-27 Jiong Wang <jiwang@tilera.com>
1480 * configure.tgt (tilegx-*-linux*): Replace whitespace with tab.
1482 2013-02-27 Yao Qi <yao@codesourcery.com>
1483 Pedro Alves <palves@redhat.com>
1485 * tracepoint.c (tfile_trace_find): For tfind
1486 pc/tp/range/outside, look for the next trace frame instead of
1487 always starting from frame 0.
1489 2013-02-26 Anthony Green <green@moxielogic.com>
1491 * configure.tgt: Add support for moxie-*-rtems* target.
1493 2013-02-25 Pedro Alves <palves@redhat.com>
1495 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Change
1498 2013-02-24 Maciej W. Rozycki <macro@codesourcery.com>
1500 * mips-tdep.c (mips32_scan_prologue): Reset frame_offset to zero
1501 if $fp is used as the virtual frame pointer.
1503 2013-02-23 Alan Modra <amodra@gmail.com>
1505 * elfread.c (elf_symtab_read): Do not use udata.p here to find
1507 * ppc64-tdep.c (ppc64_elf_make_msymbol_special): New function.
1508 * ppc64-tdep.h (ppc64_elf_make_msymbol_special): Declare.
1509 * ppc-linux-tdep.c (ppc_linux_init_abi): Set up to use the above.
1510 * ppcfbsd-tdep.c (ppcfbsd_init_abi): Likewise.
1512 2013-02-22 Jan Kratochvil <jan.kratochvil@redhat.com>
1515 * elfread.c (build_id_bfd_get): Make the return type const.
1516 (build_id_verify): Make the check parameter const.
1517 (build_id_to_debug_filename): Make the build_id parameter and variable
1519 (find_separate_debug_file_by_buildid): Make the variable build_id const.
1521 2013-02-21 Alan Modra <amodra@gmail.com>
1523 * elfread.c (build_id_bfd_get): Adjust for elf_tdata changes.
1525 2013-02-20 Siva Chandra Reddy <sivachandra@google.com>
1527 Add a new method 'disassemble' to gdb.Architecture class.
1528 * python/py-arch.c (archpy_disassmble): Implementation of the
1529 new method gdb.Architecture.disassemble.
1530 (arch_object_methods): Add entry for the new method.
1532 2013-02-20 Jiong Wang <jiwang@tilera.com>
1534 * MAINTAINERS (Write After Approval): Add myself to the list.
1536 2013-02-19 Pedro Alves <palves@redhat.com>
1538 Garbage collect 'struct monitor_ops'::load_routine.
1540 * monitor.h (struct monitor_ops) <load_routine>: Remove field.
1541 * monitor.c (monitor_load): No longer call
1542 current_monitor->load_routine.
1543 * dbug-rom.c (init_dbug_cmds): Don't set 'load_routine'.
1544 * m32r-rom.c (init_m32r_cmds): Don't set 'load_routine'.
1545 * ppcbug-rom.c (init_ppc_cmds): Don't set 'load_routine'.
1547 2013-02-19 Pedro Alves <palves@redhat.com>
1551 Harmonize with generic_load.
1553 * monitor.c: Include "readline/readline.h".
1554 (monitor_load): Rename parameter 'file' to 'args'. Use build_argv
1555 instead of sscanf. Use CORE_ADDR/strtoulst instead of unsigned
1556 long/strtol for the 'load_offset' local. Error out if no argument
1557 is given or if too many arguments are given. Tilde expand the
1558 passed in file name.
1560 2013-02-19 Kai Tietz <ktietz@redhat.com>
1563 * symfile.c (load_section_data): Change type of load_offset
1565 (generic_load): User strtoulst instead of strtoul for conversion
1568 2013-02-19 Jiong Wang <jiwang@tilera.com>
1570 * tilegx-tdep.c (tilegx_analyze_prologue): add check for
1571 for return address, "lr" register, saved on stack.
1572 * tilegx-tdep.c (tilegx_frame_cache): update "PC" reg
1573 after we invoke tilegx_analyze_prologue.
1575 2013-02-19 Jiong Wang <jiwang@tilera.com>
1577 * tilegx-tdep.c (itilegx_gdbarch_init): char type should be signed.
1579 2013-02-19 Jiong Wang <jiwang@tilera.com>
1581 * tilegx-tdep.c (tilegx_skip_prologue): Use skip_prologue_using_sal.
1583 2013-02-19 Jiong Wang <jiwang@tilera.com>
1585 * tilegx-tdep.c (INT_SWINT_1_SIGRETURN): New macro.
1586 (tilegx_write_pc): New function.
1587 (tilegx_cannot_reference_register): Return zero if REGNO
1588 is TILEGX_FAULTNUM_REGNUM.
1589 (tilegx_gdbarch_init): Add call to set_gdbarch_write_pc.
1590 (tilegx_register_name): Add handling of "faultnum" register.
1591 * tilegx-tdep.h (enum tilegx_regnum): Add TILEGX_FAULTNUM_REGNUM.
1592 * tilegx-linux-tdep.c (tilegx_linux_supply_regset): Add
1593 handling of TILEGX_FAULTNUM_REGNUM.
1594 * tilegx-linux-nat.c (regmap): Add entry for TILEGX_FAULTNUM_REGNUM.
1596 2013-02-19 Jiong Wang <jiwang@tilera.com>
1598 * tilegx-tdep.c (tilegx_push_dummy_call): args pushed on stack
1599 should be aligned to 64bit.
1601 2013-02-19 Kai Tietz <ktietz@redhat.com>
1603 * windows-nat.c (windows_xfer_memory): Fix debug-output
1606 2013-02-19 Lei Liu <lei.liu2@windriver.com>
1608 * mips-linux-nat.c (mips64_linux_regsets_store_registers):
1609 Don't check DSP register number if HAVE_DSP is not set.
1611 2013-02-19 Alan Modra <amodra@gmail.com>
1613 * elfread.c (struct build_id): Delete. Use struct elf_build_id
1614 throughout file instead.
1615 (build_id_bfd_get): Update to use new elf_tdata build_id field.
1616 Don't xmalloc return value.
1617 (build_id_verify): Similarly. Don't xfree.
1618 (build_id_to_debug_filename): Update.
1619 (find_separate_debug_file_by_buildid): Update, don't xfree.
1621 2013-02-18 Tom Tromey <tromey@redhat.com>
1624 * dwarf2read.c (read_subrange_type): Use result of
1627 2013-02-16 Yuanhui Zhang <asmwarrior@gmail.com>
1629 * frame.c: Remove one extra white space after #include
1632 2013-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1634 * contrib/cc-with-tweaks.sh: Extend the comment for -p option.
1636 2013-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1638 * gdb-gdb.gdb.in: Wrap set complaints, b internal_error, b info_command
1639 and dir commands into an if block.
1641 2013-02-15 Sanimir Agovic <sanimir.agovic@intel.com>
1643 * python/py-breakpoint (struct pybp_code): Use int instead of
1646 2013-02-15 Pedro Alves <pedro@codesourcery.com>
1647 Hafiz Abid Qadeer <abidh@codesourcery.com>
1649 * NEWS: Mention new field "trace-file".
1650 * tracepoint.c (trace_status_mi): Output "trace-file" field.
1651 (tfile_open): Record the trace file's filename in the trace
1653 (tfile_files_info): Mention the name of the trace file.
1654 Check the "filename" field explicitely.
1655 (trace_status_command): Explicitely check "filename" field.
1656 (trace_find_command): Ditto.
1657 (trace_find_pc_command): Ditto.
1658 (trace_find_tracepoint_command): Ditto.
1659 (trace_find_line_command): Ditto.
1660 (trace_find_range_command): Ditto.
1661 (trace_find_outside_command): Ditto.
1662 * tracepoint.h (struct trace_status) <from_file>: Rename it
1663 to "filename" and make it hold the trace file's filename
1664 instead of a boolean.
1665 * remote.c (remote_get_trace_status): Initialize "filename"
1666 field with NULL instead of 0.
1668 2013-02-15 Yao Qi <yao@codesourcery.com>
1670 * remote.c: Fix a typo.
1672 2013-02-14 Pierre Muller <muller@sourceware.org>
1674 * contrib/ari/gdb_ari.sh (GNU/Linux rule): Remove.
1676 2013-02-14 Pedro Alves <palves@redhat.com>
1678 * utils.c (savestring): Don't #undef it. Move function to
1679 common/common-utils.c.
1680 * common/common-utils.c: Include gdb_string.h.
1681 (savestring): Move here from utils.c.
1682 * common/common-utils.h (savestring): Declare.
1684 2013-02-14 Pedro Alves <palves@redhat.com>
1686 * utils.c (savestring): Rename parameter 'size' to 'len'.
1688 2013-02-14 Pedro Alves <palves@redhat.com>
1689 Yufeng Zhang <yufeng.zhang@arm.com>
1691 * aarch64-linux-nat.c (aarch64_init_debug_reg_state): Delete.
1692 (aarch64_inferior_data, struct aarch64_inferior_data):
1694 (struct aarch64_process_info): New.
1695 (aarch64_process_list): New global.
1696 (aarch64_find_process_pid, aarch64_add_process)
1697 (aarch64_process_info_get): New functions.
1698 (aarch64_inferior_data_get): Delete.
1699 (aarch64_process_info_get): New function.
1700 (aarch64_forget_process): New function.
1701 (aarch64_get_debug_reg_state): New parameter 'pid'. Reimplement.
1702 (aarch64_linux_prepare_to_resume): Pass the lwp's pid to
1703 aarch64_get_debug_reg_state.
1704 (aarch64_notify_debug_reg_change): Use iterate_over_lwps
1705 instead of linux_nat_iterate_watchpoint_lwps.
1706 (aarch64_linux_new_fork): New function.
1707 (aarch64_linux_child_post_startup_inferior): Use
1708 aarch64_forget_process instead of aarch64_init_debug_reg_state.
1709 (aarch64_handle_breakpoint, aarch64_linux_insert_hw_breakpoint)
1710 (aarch64_linux_remove_hw_breakpoint)
1711 (aarch64_handle_aligned_watchpoint)
1712 (aarch64_handle_unaligned_watchpoint)
1713 (aarch64_linux_insert_watchpoint)
1714 (aarch64_linux_remove_watchpoint)
1715 (aarch64_linux_stopped_data_address): Adjust to pass the current
1716 process id to aarch64_debug_reg_state.
1717 (_initialize_aarch64_linux_nat): Install aarch64_linux_new_fork as
1718 linux_nat_new_fork hook, and aarch64_forget_process as
1719 linux_nat_forget_process hook; remove the call to
1720 register_inferior_data_with_cleanup.
1722 2013-02-14 Pedro Alves <palves@redhat.com>
1724 * eval.c (evaluate_subexp_for_address) <default_case_after_eval,
1725 EVAL_AVOID_SIDE_EFFECTS>: Swap and handle TYPE_CODE_REF before
1728 2013-02-14 Pedro Alves <pedro@codesourcery.com>
1729 Hafiz Abid Qadeer <abidh@codesourcery.com>
1731 * tracepoint.h (validate_trace_state_variable_name): Declare.
1732 * tracepoint.c (validate_trace_state_variable_name): New.
1733 (trace_variable_command): Parse the trace state variable's name
1734 without using parse_expression. Do several validations.
1735 * mi/mi-main.c (mi_cmd_trace_define_variable): Don't parse the
1736 trace state variable's name with parse_expression. Validate it.
1738 2013-02-14 Yao Qi <yao@codesourcery.com>
1740 * infcmd.c (breakpoint_proceeded): Remove it.
1742 2013-02-14 Yao Qi <yao@codesourcery.com>
1744 * tracepoint.c (end_actions_pseudocommand): Make it static.
1745 (while_stepping_pseudocommand): Likewise.
1746 * tracepoint.h (end_actions_pseudocommand): Remove the
1748 (while_stepping_pseudocommand): Likewise.
1750 2013-02-14 Yao Qi <yao@codesourcery.com>
1752 * cli/cli-decode.c (help_cmd): Remove the declaration of
1754 (help_all): Likewise.
1756 2013-02-13 Pedro Alves <palves@redhat.com>
1758 * amd64-linux-nat.c (update_debug_registers_callback):
1760 (amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use
1762 (amd64_linux_prepare_to_resume): Pass the lwp's pid to
1763 i386_debug_reg_state.
1764 (amd64_linux_new_fork): New function.
1765 (_initialize_amd64_linux_nat): Install amd64_linux_new_fork as
1766 linux_nat_new_fork hook, and i386_forget_process as
1767 linux_nat_forget_process hook.
1768 * i386-linux-nat.c (update_debug_registers_callback):
1770 (i386_linux_dr_set_control, i386_linux_dr_set_addr): Use
1772 (i386_linux_prepare_to_resume): Pass the lwp's pid to
1773 i386_debug_reg_state.
1774 (i386_linux_new_fork): New function.
1775 (_initialize_i386_linux_nat): Install i386_linux_new_fork as
1776 linux_nat_new_fork hook, and i386_forget_process as
1777 linux_nat_forget_process hook.
1778 * i386-nat.c (i386_init_dregs): Delete.
1779 (i386_inferior_data, struct i386_inferior_data):
1781 (struct i386_process_info): New.
1782 (i386_process_list): New global.
1783 (i386_find_process_pid, i386_add_process, i386_process_info_get):
1785 (i386_inferior_data_get): Delete.
1786 (i386_process_info_get): New function.
1787 (i386_debug_reg_state): New parameter 'pid'. Reimplement.
1788 (i386_forget_process): New function.
1789 (i386_cleanup_dregs): Rewrite.
1790 (i386_update_inferior_debug_regs, i386_insert_watchpoint)
1791 (i386_remove_watchpoint, i386_region_ok_for_watchpoint)
1792 (i386_stopped_data_address, i386_insert_hw_breakpoint)
1793 (i386_remove_hw_breakpoint): Adjust to pass the current process id
1794 to i386_debug_reg_state.
1795 (i386_use_watchpoints): Don't register inferior data.
1796 * i386-nat.h (i386_debug_reg_state): Add new 'pid' parameter, and
1798 (i386_forget_process): Declare.
1799 * linux-fork.c (delete_fork): Call linux_nat_forget_process.
1800 * linux-nat.c (linux_nat_new_fork, linux_nat_forget_process_hook):
1802 (linux_child_follow_fork): Don't call linux_nat_new_thread here.
1803 (add_initial_lwp): New, factored out from ...
1804 (add_lwp): ... this. Don't check the number of lwps before
1805 calling linux_nat_new_thread.
1806 (linux_nat_iterate_watchpoint_lwps): Delete.
1807 (linux_nat_attach): Use add_initial_lwp instead of add_lwp.
1808 (linux_handle_extended_wait): Call the linux_nat_new_fork hook on
1810 (linux_nat_wait_1): Use add_initial_lwp instead of add_lwp for the
1812 (linux_nat_kill, linux_nat_mourn_inferior): Call
1813 linux_nat_forget_process.
1814 (linux_nat_set_new_fork, linux_nat_set_forget_process)
1815 (linux_nat_forget_process): New functions.
1816 * linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): Delete
1818 (linux_nat_iterate_watchpoint_lwps): Delete declaration.
1819 (linux_nat_new_fork_ftype, linux_nat_forget_process_ftype): New
1821 (linux_nat_set_new_fork, linux_nat_set_forget_process)
1822 (linux_nat_forget_process): New declarations.
1824 * amd64fbsd-nat.c (super_mourn_inferior): New global.
1825 (amd64fbsd_mourn_inferior): New function.
1826 (_initialize_amd64fbsd_nat): Override to_mourn_inferior.
1827 * windows-nat.c (windows_detach): Call i386_cleanup_dregs.
1829 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
1831 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity):
1834 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
1836 * aarch64-linux-nat.c (debug_reg_change_callback)
1837 (aarch64_linux_get_debug_reg_capacity): ARI fix: Replace %llx with
1840 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
1842 * aarch64-linux-nat.c (dr_changed_t): ARI fix: Replace long long
1845 2013-02-13 Pedro Alves <palves@redhat.com>
1846 Hafiz Abid Qadeer <abidh@codesourcery.com>
1848 * c-lang.c (c_op_print_tab): Add entry for UNOP_PLUS.
1850 2013-02-12 Tom Tromey <tromey@redhat.com>
1853 * c-exp.y (lex_one_token): Initialize other fields of yylval on
1855 (classify_inner_name): Remove 'first_name' argument, add
1856 'context'. Remove unused variable.
1857 (yylex): Explicitly maintain the context type. Exit loop earlier
1858 if NAME result is seen.
1860 2013-02-12 Pedro Alves <palves@redhat.com>
1862 * amd64-darwin-tdep.c: Add (C) after Copyright.
1863 * cli/cli-cmds.h: Ditto.
1864 * cli/cli-decode.c: Ditto.
1865 * cli/cli-decode.h: Ditto.
1866 * cli/cli-dump.c: Ditto.
1867 * cli/cli-dump.h: Ditto.
1868 * cli/cli-interp.c: Ditto.
1869 * cli/cli-logging.c: Ditto.
1870 * cli/cli-script.c: Ditto.
1871 * cli/cli-script.h: Ditto.
1872 * cli/cli-setshow.c: Ditto.
1873 * cli/cli-setshow.h: Ditto.
1874 * cli/cli-utils.c: Ditto.
1875 * cli/cli-utils.h: Ditto.
1876 * config/alpha/nm-osf3.h: Ditto.
1877 * config/djgpp/djconfig.sh: Ditto.
1878 * config/i386/nm-fbsd.h: Ditto.
1879 * config/i386/nm-i386gnu.h: Ditto.
1880 * config/nm-linux.h: Ditto.
1881 * config/nm-nto.h: Ditto.
1882 * config/rs6000/nm-rs6000.h: Ditto.
1883 * config/sparc/nm-sol2.h: Ditto.
1884 * darwin-nat-info.c: Ditto.
1887 * gdb-demangle.h: Ditto.
1888 * i386-darwin-nat.c: Ditto.
1889 * i386-darwin-tdep.c: Ditto.
1890 * linux-fork.h: Ditto.
1891 * m32c-tdep.c: Ditto.
1892 * microblaze-linux-tdep.c: Ditto.
1893 * microblaze-rom.c: Ditto.
1894 * microblaze-tdep.c: Ditto.
1895 * microblaze-tdep.h: Ditto.
1896 * mips-linux-tdep.h: Ditto.
1897 * ppc-ravenscar-thread.c: Ditto.
1898 * ppc-ravenscar-thread.h: Ditto.
1899 * prologue-value.c: Ditto.
1900 * prologue-value.h: Ditto.
1901 * ravenscar-thread.c: Ditto.
1902 * ravenscar-thread.h: Ditto.
1903 * sparc-ravenscar-thread.c: Ditto.
1904 * sparc-ravenscar-thread.h: Ditto.
1905 * tilegx-linux-tdep.c: Ditto.
1906 * unwind_stop_reasons.def: Ditto.
1907 * windows-nat.h: Ditto.
1908 * xtensa-linux-tdep.c: Ditto.
1909 * xtensa-xtregs.c: Ditto.
1910 * regformats/regdat.sh: Ditto.
1911 * regformats/regdef.h: Ditto.
1913 2013-02-12 Pedro Alves <palves@redhat.com>
1915 * break-catch-sig.c: Update copyright years.
1917 2013-02-11 Siva Chandra Reddy <sivachandra@google.com>
1919 Add support for a destructor for ui_out data and use it to
1920 provide a ui_out destructor.
1921 * ui-out.h: Declare the new ui_out destructor.
1922 (ui_out_impl): Add a field for data destructor in ui_out_impl.
1923 * ui-out.c (default_data_destroy): Add a default data destructor
1925 (default_ui_out_impl): Set the new data_destroy field to
1926 default_data_destroy
1927 (uo_data_destroy): Local function which invokes the data
1928 destructor if present.
1929 (clear_table): Local function which clears the table data of a
1931 (ui_out_destroy): Public function which frees a ui_out object.
1932 (ui_out_table_end): Use the new clear_table function.
1933 * cli-out.c (cli_ui_out_impl): Set the new data_destroy field to
1935 * mi/mi-out.c (mi_ui_out_impl): Set the new data_destroy field
1938 2013-02-11 Doug Evans <dje@google.com>
1940 * printcmd.c (printf_c_string,printf_wide_c_string): New functions.
1941 (printf_decfloat): New function. Broken out from ui_printf.
1942 Remove unnecessary code to shift the entire format string down.
1943 (printf_pointer): New function.
1944 (ui_printf): Code to print C strings, wide C strings, decfloats,
1945 and pointers moved to separate functions.
1947 2013-02-11 Sergio Durigan Junior <sergiodj@redhat.com>
1949 * valops.c (value_assign): Handling bitfield offset in
1950 `lval_internalvar_component' case.
1952 2013-02-08 Doug Evans <dje@google.com>
1954 * common/format.c (parse_format_string): Fix whitespace.
1956 2013-02-08 Matthew Gretton-Dann <matthew.gretton-dann@linaro.org>
1958 * stack.c (return_command): Work around uninitialized variable
1961 2013-02-08 Yufeng Zhang <yufeng.zhang@arm.com>
1963 * aarch64-linux-tdep.c (AARCH64_LINUX_SIZEOF_GREGSET): Change the
1964 number of the registers from 36 to 34.
1966 2013-02-08 Marcus Shawcroft <marcus.shawcroft@arm.com>
1968 * NEWS: Mention new AArch64 native and target support.
1970 2013-02-08 Marcus Shawcroft <marcus.shawcroft@arm.com>
1972 * MAINTAINERS (Write After Approval): Add myself.
1974 2013-02-08 Jim MacArthur <jim.macarthur@arm.com>
1975 Marcus Shawcroft <marcus.shawcroft@arm.com>
1976 Nigel Stephens <nigel.stephens@arm.com>
1977 Yufeng Zhang <yufeng.zhang@arm.com>
1979 * aarch64-linux-nat.c: New file.
1980 * config/aarch64/linux.mh: New file.
1981 * configure.host: Add AArch64.
1982 * Makefile.in (ALLDEPFILES): Add aarch64-linux-nat.c.
1984 2013-02-07 Doug Evans <dje@google.com>
1986 * cli/cli-cmds.c (_initialize_cli_cmds): Clarify argument to
1987 disassemble command.
1989 2013-02-07 Marcus Shawcroft <marcus.shawcroft@arm.com>
1991 * aarch64-linux-tdep.c (aarch64_linux_init_abi): Call
1992 set_gdbarch_fetch_tls_load_module_address.
1994 2013-02-06 David S. Miller <davem@davemloft.net>
1996 * sparc-tdep.c (sparc32_return_value): Handle writing return value when
1997 using RETURN_VALUE_ABI_PRESERVES_ADDRESS.
1998 * value.c (struct_return_convention): New function.
1999 (using_struct_return): Implement in terms of struct_return_convention.
2000 * value.h (struct_return_convention): Declare.
2001 * stack.c (return_command): Allow successful overriding of the return
2002 value when RETURN_VALUE_ABI_PRESERVES_ADDRESS.
2004 2013-02-06 Tom Tromey <tromey@redhat.com>
2006 * python/py-type.c (typy_strip_typedefs): Don't call check_typedef
2007 outside of TRY_CATCH.
2009 2013-02-06 Yao Qi <yao@codesourcery.com>
2011 * mi/mi-interp.c: Include "tracepoint.h".
2012 (mi_tsv_modified): Declare.
2013 (mi_tsv_created, mi_tsv_deleted): Update declaration.
2014 (mi_interpreter_init): Call observer_attach_tsv_modified.
2015 (mi_tsv_modified): New.
2016 (mi_tsv_created, mi_tsv_deleted): Update.
2017 * tracepoint.c (trace_variable_command): Call
2018 observer_notify_tsv_modified if the initial value of tsv is
2020 (delete_trace_state_variable): Call
2021 observer_notify_tsv_deleted earlier.
2022 (trace_variable_command): Caller update.
2023 (create_tsv_from_upload): Likewise.
2024 * observer.sh: Declare "struct trace_state_variable".
2026 * NEWS: Mention the new MI notification "=tsv-modified".
2028 2013-02-05 Doug Evans <dje@google.com>
2030 * completer.c (location_completer): Fix typo in comment.
2032 2013-02-05 Jan Kratochvil <jan.kratochvil@redhat.com>
2034 * breakpoint.c (add_location_to_breakpoint): Insert the location with
2037 2013-02-05 Marcus Shawcroft <marcus.shawcroft@arm.com>
2039 * aarch64-tdep.c (aarch64_analyze_prologue): ARI fix:
2040 Refactor if statement to avoid trailing || operator.
2042 2013-02-05 Andreas Tobler <andreast@fgznet.ch>
2044 * NEWS: Add PowerPC FreeBSD as a new native configuration.
2046 2013-02-04 Andreas Tobler <andreast@fgznet.ch>
2048 * Makefile.in (ALL_TARGET_OBS): Add powerpc FreeBSD files.
2049 * configure.host: Add powerpc*-*-freebsd* target.
2050 * configure.tgt: Add target info for powerpc*-*-freebsd*.
2051 * ppcfbsd-nat.c, ppcfbsd-tdep.h, ppcfbsd-tdep.c: New files.
2052 * config/powerpc/fbsd.mh: New file.
2054 2013-02-04 Sergio Durigan Junior <sergiodj@redhat.com>
2055 Denys Vlasenko <dvlasenk@redhat.com>
2056 Pedro Alves <palves@redhat.com>
2058 * gdbarch.sh (elfcore_write_linux_prpsinfo): New F hook.
2059 (struct elf_internal_linux_prpsinfo): Forward declare.
2060 * gdbarch.h, gdbarch.c: Regenerate.
2061 * linux-tdep.c: Include `cli/cli-utils.h'.
2062 (linux_fill_prpsinfo): New function.
2063 (linux_make_corefile_notes): Use linux_fill_prpsinfo. If there's
2064 an elfcore_write_linux_prpsinfo hook, use it, otherwise, use
2065 elfcore_write_linux_prpsinfo32 or elfcore_write_linux_prpsinfo64
2066 depending on gdbarch pointer bitness.
2067 * ppc-linux-tdep.c: Include elf-bfd.h.
2068 (ppc_linux_init_abi): Hook in elfcore_write_ppc_linux_prpsinfo32
2071 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2072 Marcus Shawcroft <marcus.shawcroft@arm.com>
2073 Nigel Stephens <nigel.stephens@arm.com>
2074 Yufeng Zhang <yufeng.zhang@arm.com>
2076 * configure.tgt (aarch64*-*-linux*): Set build_gdbserver=yes.
2078 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2079 Marcus Shawcroft <marcus.shawcroft@arm.com>
2080 Nigel Stephens <nigel.stephens@arm.com>
2081 Yufeng Zhang <yufeng.zhang@arm.com>
2083 * aarch64-newlib-tdep.c: New file.
2084 * configure.tgt: Add aarch64-newlib-tdep.o to gdb_target_obs of
2086 * defs.h (enum gdb_osabi): Add GDB_OSABI_NEWLIB.
2087 * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-newlib-tdep.o.
2088 (ALLDEPFILES): Add aarch64-newlib-tdep.c.
2089 * osabi.c (gdb_osabi_names): Add "Newlib".
2091 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2092 Marcus Shawcroft <marcus.shawcroft@arm.com>
2093 Nigel Stephens <nigel.stephens@arm.com>
2094 Yufeng Zhang <yufeng.zhang@arm.com>
2096 * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-linux-tdep.o.
2097 (ALLDEPFILES): Add aarch64-linux-tdep.c.
2098 * aarch64-linux-tdep.c: New file.
2099 * aarch64-linux-tdep.h: New file.
2100 * aarch64-tdep.h (gdbarch_tdep): Define gregset and fpregset.
2101 * configure.tgt: Add aarch64-none-linux-gnu.
2103 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2104 Marcus Shawcroft <marcus.shawcroft@arm.com>
2105 Nigel Stephens <nigel.stephens@arm.com>
2106 Yufeng Zhang <yufeng.zhang@arm.com>
2108 * Makefile.in (ALL_64_TARGET_OBS): Add arch64-tdep.o.
2109 (HFILES_NO_SRCDIR): Add aarch64-tdep.h.
2110 (ALLDEPFILES): Add aarch64-tdep.c.
2111 * aarch64-tdep.c: New file.
2112 * aarch64-tdep.h: New file.
2113 * configure.tgt: Add AArch64.
2114 * features/Makefile (WHICH): Add aarch64 and aarch64-without-fpu.
2115 (aarch64-expedite): New definition.
2116 * features/aarch64-core.xml: New file.
2117 * features/aarch64-fpu.xml: New file.
2118 * features/aarch64-without-fpu.c: New file (generated).
2119 * features/aarch64-without-fpu.xml: New file.
2120 * features/aarch64.c: New file (generated).
2121 * features/aarch64.xml: New file.
2122 * regformats/aarch64-without-fpu.dat: New file (generated).
2123 * regformats/aarch64.dat: New file (generated).
2125 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2127 * contrib/expect-read1.c: New file.
2128 * contrib/expect-read1.sh: New file.
2130 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2132 * dwarf2read.c (file_file_name): New function with code from
2134 (file_full_name): Move most of the code to file_file_name.
2135 (macro_start_file): Rename variable full_name to file_name and use
2136 file_file_name for it. Add comp_dir parameter to new_macro_table.
2137 * macrocmd.c (show_pp_source_pos): New variable fullname. Replace any
2138 macro_source_file->filename access by macro_source_fullname call.
2139 * macroscope.c (_initialize_macroscope): Update the new_macro_table
2141 * macrotab.c (struct macro_table): New field comp_dir.
2142 (macro_include): New variables link_fullname and source_fullname.
2143 Replace any macro_source_file->filename access by macro_source_fullname
2145 (macro_lookup_inclusion): Remove the partial filenames checking code.
2146 (check_for_redefinition): New variables source_fullname and
2147 found_key_fullname. Replace any macro_source_file->filename access by
2148 macro_source_fullname call.
2149 (macro_undef): New variables source_fullname and key_fullname. Replace
2150 any macro_source_file->filename access by macro_source_fullname call.
2151 (macro_lookup_definition): New variables retval and source_fullname.
2152 Replace any macro_source_file->filename access by macro_source_fullname
2154 (foreach_macro): New variable key_fullname. Replace any
2155 macro_source_file->filename access by macro_source_fullname call.
2156 (foreach_macro_in_scope): New variable datum_fullname. Replace any
2157 macro_source_file->filename access by macro_source_fullname call.
2158 (new_macro_table): Add parameter comp_dir. Initialize T with it.
2159 (macro_source_fullname): New function.
2160 * macrotab.h (struct macro_source_file): Extent the filename field
2162 (new_macro_table): New parameter comp_dir, add a comment for it.
2163 (macro_source_fullname): new declaration.
2165 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2167 * dwarf2read.c (dw2_map_symtabs_matching_filename): Move variable
2168 this_real_name to outer block. Use it also for
2169 compare_filenames_for_search.
2170 (dw2_expand_symtabs_matching): New variable this_real_name. Use it
2171 with dw2_get_real_path for file_matcher, considering also
2172 BASENAMES_MAY_DIFFER.
2173 (file_full_name): Prepend COMP_DIR even for relative lh->INCLUDE_DIRS.
2175 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2177 * dwarf2read.c (dw2_expand_symtabs_matching): Add basenames parameter
2178 to the file_matcher parameter. Pass 0 to it.
2179 (dwarf2_create_include_psymtab): Copy also DIRNAME.
2180 * psymtab.c (partial_map_symtabs_matching_filename): Drop handling of
2181 NULL psymtab_to_fullname result.
2182 (psymtab_to_fullname): Remove variable r. Never return NULL, assemble
2183 an expected filename instead.
2184 (expand_symtabs_matching_via_partial): Add basenames parameter to the
2185 file_matcher parameter. Call also psymtab_to_fullname, after newly
2186 considering BASENAMES_MAY_DIFFER.
2187 * source.c (rewrite_source_path): Remove static.
2188 * source.h (rewrite_source_path): New declaration.
2189 * symfile.h (struct quick_symbol_functions): Add basenames parameter to
2190 the expand_symtabs_matching field. Comment it.
2191 * symtab.c (file_matches): New function comment. Add parameter
2192 basenames, implement it.
2193 (search_symbols_file_matches): Add basenames parameter. Update the
2194 file_matches caller.
2195 (search_symbols): Match FILES also against symtab_to_fullname.
2196 Optimize it for BASENAMES_MAY_DIFFER.
2198 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2200 * source.c (print_source_lines_base): Print for TUI also "fullname".
2201 * tui/tui-data.c (init_content_element): Change tui_locator_element
2203 * tui/tui-data.h (struct tui_locator_element): Likewise.
2204 * tui/tui-disasm.c (tui_show_disassem_and_update_source): Rename
2205 tui_update_locator_filename calls to tui_update_locator_fullname.
2206 Replace symtab->filename refererence by symtab_to_fullname call.
2207 * tui/tui-out.c (tui_field_string): Check for "fullname" now.
2208 * tui/tui-source.c (tui_set_source_content): Change tui_locator_element
2209 field to full_name. Replace symtab->filename refererence by
2210 symtab_to_fullname call.
2211 (tui_show_symtab_source): Rename parameter to fullname. Change
2212 tui_locator_element field to full_name.
2213 * tui/tui-stack.c: Include source.h.
2214 (tui_set_locator_filename): Rename the declaration to ...
2215 (tui_set_locator_fullname): ... here. Rename its parameter to
2216 fullname, updates its comment.
2217 (tui_set_locator_info): Rename its parameter to fullname.
2218 (tui_set_locator_filename): Rename the definition to ...
2219 (tui_set_locator_fullname): ... here. Rename its parameter to
2220 fullname, updates its comment. Change tui_locator_element field to
2222 (tui_set_locator_info): Rename its parameter to fullname.
2223 (tui_set_locator_info): Rename callee to tui_set_locator_fullname.
2224 (tui_update_locator_filename): Rename to ...
2225 (tui_update_locator_fullname): ... here. Rename callee to
2226 tui_set_locator_fullname.
2227 (tui_show_frame_info): Replace symtab->filename refererence by
2228 symtab_to_fullname call.
2229 * tui/tui-stack.h (tui_update_locator_filename): Rename to ...
2230 (tui_update_locator_fullname): ... here.
2231 * tui/tui-winsource.c (tui_display_main): Rename the callee to
2232 tui_update_locator_fullname. Replace symtab->filename refererence by
2233 symtab_to_fullname call.
2234 * tui/tui.c (tui_show_source): Rename its parameter to fullname.
2235 Rename the callee to tui_update_locator_fullname.
2236 * tui/tui.h (tui_show_source): Rename its parameter to fullname.
2238 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2240 * ada-lang.c (user_select_syms): Replace symtab->filename refererences
2241 by symtab_to_filename_for_display calls.
2242 * breakpoint.c (print_breakpoint_location, resolve_sal_pc): Likewise.
2243 (clear_command): New variable sal_fullname, initialize it. Replace
2244 compare_filenames_for_search by filename_cmp with sal_fullname.
2245 (say_where, update_static_tracepoint): Replace symtab->filename
2246 refererences by symtab_to_filename_for_display calls.
2247 * cli/cli-cmds.c (edit_command, list_command, ambiguous_line_spec):
2249 * dwarf2read.c: Include source.h.
2250 (fixup_go_packaging): Replace symtab->filename refererences by
2251 symtab_to_filename_for_display calls.
2252 * linespec.c (add_sal_to_sals): Rename variable filename to fullname.
2253 Replace symtab->filename refererences by symtab_to_filename_for_display
2255 (create_sals_line_offset, convert_linespec_to_sals): New variable
2256 fullname, initialize it, replace symtab->filename reference by the
2258 * linux-fork.c: Include source.h.
2259 (info_checkpoints_command): Replace symtab->filename refererences by
2260 symtab_to_filename_for_display calls.
2261 * macroscope.c (sal_macro_scope): Replace symtab->filename refererences
2262 by symtab_to_filename_for_display calls.
2263 * mdebugread.c: Include source.h.
2264 (psymtab_to_symtab_1): Replace symtab->filename refererences by
2265 symtab_to_filename_for_display calls.
2266 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
2267 (mi_cmd_file_list_exec_source_files): Likewise.
2268 * printcmd.c: Include source.h.
2269 (build_address_symbolic): Replace symtab->filename refererences by
2270 symtab_to_filename_for_display calls.
2271 * psymtab.c (partial_map_symtabs_matching_filename)
2272 (read_psymtabs_with_fullname): Call compare_filenames_for_search also
2273 with psymtab_to_fullname.
2274 * python/py-symtab.c (stpy_str): Replace symtab->filename refererences
2275 by symtab_to_filename_for_display calls.
2276 (stpy_get_filename): New variable filename, initialize it, use instead
2277 of symtab->filename refererences.
2278 (salpy_str): Make variable filename const char *. Replace
2279 symtab->filename refererences by symtab_to_filename_for_display calls.
2280 * skip.c: Include source.h and filenames.h.
2281 (skip_file_command): Remove const from the symtab variable. Replace
2282 symtab->filename refererences by symtab_to_fullname call.
2283 (function_name_is_marked_for_skip): New variables searched_for_fullname
2284 and fullname. Use them to search also with symtab's fullname.
2285 * source.c (find_source_lines): Replace symtab->filename refererences
2286 by symtab_to_filename_for_display calls.
2287 (print_source_lines_base): New variable filename, use it instead of
2288 symtab->filename. Replace symtab->filename refererences by
2289 symtab_to_filename_for_display calls.
2290 (line_info, forward_search_command): Replace symtab->filename
2291 refererences by symtab_to_filename_for_display calls.
2292 (reverse_search_command): Replace symtab->filename refererences by
2293 symtab_to_filename_for_display calls. New variable filename for it.
2294 * stack.c (frame_info): Likewise.
2295 * symmisc.c: Include source.h.
2296 (dump_objfile, dump_symtab_1, maintenance_print_symbols)
2297 (maintenance_info_symtabs): Replace symtab->filename refererences by
2298 symtab_to_filename_for_display calls.
2299 * symtab.c (iterate_over_some_symtabs): Call
2300 compare_filenames_for_search also with symtab_to_fullname.
2301 (lookup_symbol_aux_quick, basic_lookup_transparent_type_quick): Replace
2302 symtab->filename refererences by symtab_to_filename_for_display calls.
2303 (find_line_symtab): Replace symtab->filename refererences by
2304 symtab_to_filename_for_display calls.
2305 (file_matches): Replace filename_cmp by compare_filenames_for_search.
2306 (print_symbol_info): Make the last parameter const char *. New
2307 variable s_filename. Use it in the function.
2308 (symtab_symbol_info): Make the last_filename variable const char *.
2309 Replace symtab->filename refererences by symtab_to_filename_for_display
2311 (rbreak_command): New variable fullname. Use it. Replace
2312 symtab->filename refererence by symtab_to_filename_for_display call.
2313 * tracepoint.c (set_traceframe_context, trace_find_line_command)
2314 (print_one_static_tracepoint_marker): Replace symtab->filename
2315 refererences by symtab_to_filename_for_display calls.
2316 * tui/tui-source.c (tui_set_source_content): New variables filename and
2317 s_filename. Replace symtab->filename refererences by this variable.
2318 Replace other symtab->filename refererences by
2319 symtab_to_filename_for_display calls.
2321 2013-02-03 Eldar Gaynetdinov <hal9000ed2k@gmail.com>
2322 Jan Kratochvil <jan.kratochvil@redhat.com>
2324 Add a new variable that controls a way in which filenames are
2326 * NEWS (set filename-display): New entry.
2327 * source.c (filename_display_basename, filename_display_relative)
2328 (filename_display_absolute, filename_display_kind_names)
2329 (filename_display_string, show_filename_display_string)
2330 (symtab_to_filename_for_display): New.
2331 (_initialize_source): Added initialization of 'filename-display'
2333 * source.h (symtab_to_filename_for_display): Added declaration.
2334 * stack.c (print_frame): Added new variable and calling of a new
2335 function and condition with this variable. Changed third argument of
2336 calling of a function.
2338 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2340 * tui/tui-data.c (init_win_info, tui_del_window, tui_free_window):
2341 Rename field reference filename to fullname.
2342 * tui/tui-data.h (struct tui_source_info): Rename field filename to
2343 fullname. New comment for it.
2344 * tui/tui-source.c (tui_set_source_content): Rename field reference
2345 filename to fullname. Initialize field by symtab_to_fullname now.
2346 * tui/tui-winsource.c (tui_update_breakpoint_info): Rename field
2347 reference filename to fullname. Use symtab_to_fullname during
2350 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2353 * dwarf2read.c (dw2_expand_symtabs_with_filename): Rename to ...
2354 (dw2_expand_symtabs_with_fullname): ... here. Rename parameter
2355 filename to fullname. Rename variable this_name to this_fullname.
2356 Lowercase FILENAME_CMP call.
2357 (dw2_find_symbol_file): New comment for the returned string.
2358 (dwarf2_gdb_index_functions): Rename the function to
2359 dw2_expand_symtabs_with_fullname.
2360 * psymtab.c (read_psymtabs_with_filename): Rename to ...
2361 (read_psymtabs_with_fullname): ... here. Rename parameter filename to
2363 (psym_functions): Rename the function to read_psymtabs_with_fullname.
2364 * symfile.h (struct quick_symbol_functions): Rename field
2365 expand_symtabs_with_filename to expand_symtabs_with_fullname and its
2366 parameter filename to fullname. Document returned string meaning for
2368 * symtab.c (find_line_symtab): Rename the called function to
2369 expand_symtabs_with_fullname.
2371 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2374 * breakpoint.c (clear_command): Remove variable is_abs, unify the
2375 call of filename_cmp with compare_filenames_for_search.
2376 * dwarf2read.c (dw2_map_symtabs_matching_filename): Remove variable
2377 is_abs, unify the call of FILENAME_CMP with
2378 compare_filenames_for_search. New gdb_asserts for real_path and name.
2379 Unify the call of compare_filenames_for_search with FILENAME_CMP.
2380 * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
2381 * symfile.h (struct quick_symbol_functions): Extend the comment for
2382 map_symtabs_matching_filename.
2383 * symtab.c (compare_filenames_for_search): Remove the function comment
2384 relative path requirement. Handle absolute filenames, with a comment.
2385 (iterate_over_some_symtabs): Remove variable is_abs, unify the call of
2386 FILENAME_CMP with compare_filenames_for_search. New gdb_asserts for
2387 real_path and name. Unify the call of compare_filenames_for_search
2389 (iterate_over_symtabs): New gdb_assert on REAL_PATH.
2391 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2394 * breakpoint.c (print_breakpoint_location): Replace bp_location field
2395 source_file references by symtab field references. Remove variables
2397 (momentary_breakpoint_from_master, add_location_to_breakpoint):
2398 (clear_command, say_where): Replace bp_location field source_file
2399 references by symtab field references.
2400 (bp_location_dtor): Remove the source_file reference.
2401 (update_static_tracepoint): Replace bp_location field source_file
2402 references by symtab field references.
2403 (breakpoint_free_objfile): New function.
2404 * breakpoint.h (struct bp_location): Extend the comment for line_number.
2405 Replace the field source_file by field symtab, extend its comment.
2406 (breakpoint_free_objfile): New declaration.
2407 * objfiles.c (free_objfile): Call breakpoint_free_objfile.
2408 * tui/tui-winsource.c (tui_update_breakpoint_info): Replace bp_location
2409 field source_file references by symtab field references.
2411 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2413 Replace xfullpath calls by gdb_realpath calls.
2414 * cli/cli-cmds.c (find_and_open_script): Remove xfullpath from the
2416 * dwarf2read.c (dw2_map_expand_apply): Remove parameter full_path.
2417 Remove it from the iterate_over_some_symtabs call.
2418 (dw2_map_symtabs_matching_filename): Remove parameter full_path.
2419 Remove it from the dw2_map_expand_apply calls, remove a block handling
2421 * psymtab.c (partial_map_expand_apply): Remove parameter full_path.
2422 Remove it from the iterate_over_some_symtabs call.
2423 (partial_map_symtabs_matching_filename): Remove parameter full_path.
2424 Remove it from the partial_map_expand_apply calls, remove a block
2425 handling it. Drop gdb_realpath call and cleanups from the real_path
2427 * source.c (openp): Drop the comment part about xfullpath. Replace
2428 xfullpath calls by gdb_realpath calls.
2429 (find_and_open_source): Replace xfullpath call by gdb_realpath call.
2430 * symfile.h (struct quick_symbol_functions): Remove parameter full_path
2431 from method map_symtabs_matching_filename and its comment.
2432 * symmisc.c (maintenance_print_msymbols): Replace xfullpath call by
2434 * symtab.c (iterate_over_some_symtabs): Remove parameter full_path,
2435 remove it also from the function comment, remove a block handling it.
2436 Drop gdb_realpath call and cleanups from the real_path handling.
2437 (iterate_over_symtabs): Drop variable full_path and its use.
2438 * symtab.h (iterate_over_some_symtabs): Remove parameter full_path.
2439 * utils.c (xfullpath): Remove.
2440 * utils.h (xfullpath): Remove.
2442 2013-02-01 Andreas Tobler <andreast@fgznet.ch>
2444 * Makefile.in (ALL_TARGET_OBS): Add ppc64-tdep.o.
2445 (HFILES_NO_SRCDIR): Add ppc64-tdep.h.
2446 (ALLDEPFILES): Add ppc64-tdep.c.
2447 * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
2448 ppc64-tdep.o to gdb_target_obs.
2449 * ppc64-tdep.h: New file.
2450 * ppc64-tdep.c: New file.
2451 (insn_d, insn_ds, insn_xfx, ppc64_desc_entry_point): Move from
2452 ppc-linux-tdep.c to here.
2453 (PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN)
2454 (PPC64_STANDARD_LINKAGE2_LEN): Likewise and use ARRAY_SIZE macro.
2455 (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target)
2456 (ppc64_standard_linkage3_target, ppc64_skip_trampoline_code): Move
2457 from ppc-linux-tdep.c to here.
2458 (ppc64_convert_from_func_ptr_addr): Rename from
2459 ppc64_linux_convert_from_func_ptr_addr to
2460 ppc64_convert_from_func_ptr_addr and move from ppc-linux-tdep.c to
2463 (read_insn): Move from ppc-linux-tdep.c to here.
2464 (insns_match_pattern, insn_d_field, insn_ds_field): Move
2465 from ppc-linux-tdep.c to here and rename them with the ppc_ prefix.
2466 * ppc-linux-tdep.c: Include ppc64-tdep.h.
2467 Removed above functions.
2468 (ppc_linux_init_abi): Adjust.
2470 2013-02-01 Aleksandar Ristovski <aristovski@qnx.com>
2472 * ada-valprint.c (ada_print_floating): Remove unused 'len'.
2474 2013-02-01 Aleksandar Ristovski <aristovski@qnx.com>
2476 * ada-lang.c (assign_aggregate): Remove unused 'is_array_aggregate'.
2478 2013-02-01 Pedro Alves <palves@redhat.com>
2480 * dummy-frame.c (deprecated_pc_in_call_dummy): Delete function.
2481 * frame.h (deprecated_pc_in_call_dummy): Delete declaration.
2483 2013-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
2485 * elfread.c (elf_symfile_read): Limit separate debug info additions to
2486 files with no separate debug info.
2487 * objfiles.c (add_separate_debug_objfile): Add gdb_assert calls.
2488 * symfile.c (read_symbols): Call find_separate_debug_file_in_section
2489 only for files with no separate debug info.
2491 2013-01-31 Tom Tromey <tromey@redhat.com>
2493 * jit.c (jit_program_space_data): Rename from jit_inferior_data;
2495 (struct jit_program_space_data): Rename from jit_inferior_data.
2497 (get_jit_program_space_data): Rename from get_jit_inferior_data.
2498 Change return type. Attach data to program space.
2499 (jit_program_space_data_cleanup): Rename from
2500 jit_inferior_data_cleanup; change argument type.
2501 (jit_read_descriptor): Change 'inf_data' argument to 'ps_data',
2503 (jit_register_code): Update.
2504 (jit_update_inferior_cache): Remove.
2505 (jit_breakpoint_deleted): Get jit data from the location's program
2507 (jit_breakpoint_re_set_internal): Rename 'inf_data' argument to
2508 'ps_data', change type.
2509 (jit_inferior_init, jit_breakpoint_re_set_internal)
2510 (jit_event_handler): Update.
2511 (free_objfile_data): Get data from objfile's program space.
2512 (_initialize_jit): Update.
2514 2013-01-31 Tom Tromey <tromey@redhat.com>
2517 * jit.c (struct jit_inferior_data) <cached_code_address,
2518 jit_breakpoint>: New fields.
2519 (jit_breakpoint_re_set_internal): Fix logging. Only create
2520 breakpoint if cached address has changed.
2521 (jit_update_inferior_cache, jit_breakpoint_deleted): New
2523 (_initialize_jit): Register breakpoint deleted observer.
2525 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2527 * infrun.c (handle_syscall_event): Remove unused gdbarch.
2528 (save_infcall_suspend_state): Ifdef out unused inf.
2529 (restore_infcall_suspend_state): Ifdef out unused inf.
2530 * jit.c (jit_register_code): Remove unused i, b, inf_data.
2531 (jit_frame_sniffer): Remove unused inf_data.
2533 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2535 * c-exp.y (classify_inner_name): Remove unused type.
2536 * c-lang.c (c_printstr): Remove unused byte_order, i, things_printed,
2537 in_quotes, need_comma, wchar_buf, output, cleanup, iter, finished,
2539 (c_get_string): Remove unused kind.
2540 * c-typeprint.c (c_type_print_args): Remove unused i, len, args, table2.
2542 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2544 * charset.c (intermediate_encoding): Remove unused i.
2545 * completer.c (signal_completer): Remove unused i.
2546 * continuations.c (discard_my_continuations_1): Remove unused
2548 * corelow.c (core_close): Remove unuseD name.
2549 (get_core_siginfo): Remove unused pid.
2550 * cp-namespace.c (cp_lookup_symbol_imports_or_template): Remove unused
2552 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Remove unused base_offset.
2553 (loclist_describe_location): Remove unused first.
2554 * event-top.c (command_line_handler): Remove unused got_eof.
2555 * exec.c (exec_close_1): Remove unused need_symtab_cleanup.
2556 (resize_section_table): Remove unused old_value.
2557 * gdb_bfd.c (gdb_bfd_map_section): Remove unused header.
2558 * gnu-v3-abi.c (compute_vtable_size): Remove unused addr.
2559 * i386-tdep.c (i386_process_record): Remove unused rex.
2560 * infcmd.c (get_return_value): Remove unused uiout.
2561 * jv-lang.c (type_from_class): Remove unused is_array.
2562 * jv-valprint.c (java_val_print): Remove unused i.
2563 * linux-nat.c (linux_nat_stop_lwp): Remove unused ptid.
2564 * linux-thread-db.c (thread_db_find_new_threads_2): Remove unuseD pid.
2565 * m2-typeprint.c (m2_print_type): Remove unused code.
2566 * macroexp.c (get_character_constant): Remove unused body_start.
2567 (macro_stringify): Remove unused result.
2568 * objc-lang.c (find_methods): Remove unused gdbarch.
2569 * objfiles.c (filter_overlapping_sections): Remove unused abfd1, abfd2.
2570 * regcache.c (regcache_cooked_read): Remove unused gdbarch.
2571 * stack.c (print_frame_args): Remove unused summary.
2572 * thread.c (thread_apply_command): Remove unused p.
2573 * valarith.c (value_x_unop): Remove unused mangle_ptr.
2574 * valops.c (search_struct_method): Remove unused skip.
2575 * valprint.c (generic_val_print): Remove unused byte_order.
2576 * varobj.c (varobj_update): Remove unused changed.
2577 * cli/cli-cmds.c (complete_command): Remove unused next_item.
2578 (alias_command): Remove unused c.
2579 * mi/mi-cmd-catch.c (mi_catch_load_unload): Remove unused c.
2580 * mi/mi-main.c (mi_cmd_data_write_register_values): Remove unused
2582 (mi_cmd_data_write_memory): Remove unused word_format.
2583 (mi_cmd_data_write_memory_bytes): Remove unused r.
2584 * python/py-gdb-readline.c (gdbpy_readline_wrapper): Remove unused
2586 * python/python.c (_initialize_python): Remove unused cmd_name, cmd.
2587 * tui/tui-disasm.c (tui_set_disassem_content): Remove unused
2590 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2592 * dwarf2-frame.c (dwarf2_compile_cfa_to_ax): Remove unused num_regs.
2593 * symtab.c (iterate_over_symtabs): Remove unused s.
2594 (find_pc_sect_symtab): Remove unused pspAce.
2595 (find_pc_sect_line): Remove unused alt_symtab.
2596 (find_pcs_for_symtab_line): Remove unused ix, previous_function.
2597 (completion_list_add_name): Remove unused newsize.
2599 2013-01-31 Tom Tromey <tromey@redhat.com>
2602 * dwarf2read.c (read_tag_ptr_to_member_type): Handle
2605 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2607 * target.c (target_read_string): Remove unused origlen.
2609 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2611 * auto-load.c (auto_load_expand_dir_vars): Remove unused dir_vec.
2612 * ax-gdb.c (gen_printf): Remove unused expr, i, bot, fr, flen, fmt.
2613 * ax-general.c (ax_print): Remove unused is_float.
2614 * blockframe.c (block_innermost_frame): Remove unused start, end.
2615 * break-catch-sig.c (catch_signal_command): Remove unused gdbarch.
2617 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2619 * solib-svr4.c (svr4_keep_data_in_core): Remove unused lmo.
2620 (svr4_read_so_list): Remove unused lmo.
2621 * solib-target.c (solib_target_relocate_section_addresses): Remove
2624 2013-01-30 Tom Tromey <tromey@redhat.com>
2626 * hppa-tdep.c (read_unwind_info): Use SECT_OFF_TEXT, not "0".
2628 2013-01-30 Tom Tromey <tromey@redhat.com>
2630 * symfile.c (get_file_crc): Use bfd_calc_gnu_debuglink_crc32.
2631 * utils.c (gnu_debuglink_crc32): Remove.
2632 * utils.h (gnu_debuglink_crc32): Don't declare.
2634 2013-01-30 Tom Tromey <tromey@redhat.com>
2636 * dwarf2read.c (compute_delayed_physnames, read_call_site_scope)
2637 (read_structure_type, read_enumeration_type): Remove cast.
2639 2013-01-30 Tom Tromey <tromey@redhat.com>
2641 * dwarf2read.c (read_namespace_type): Remove cast.
2642 (read_typedef): Likewise.
2644 2013-01-29 Tom Tromey <tromey@redhat.com>
2646 * dwarf2read.c (free_dwo_file): Remove assert.
2648 2013-01-29 Tom Tromey <tromey@redhat.com>
2650 * value.c (deprecated_set_value_modifiable): Remove.
2651 * value.h (deprecated_set_value_modifiable): Remove.
2653 2013-01-28 Doug Evans <dje@google.com>
2655 * dwarf2loc.c (dwarf2_find_location_expression): Don't add base address
2656 to addresses from dwo files.
2658 2013-01-25 Siva Chandra Reddy <sivachandra@google.com>
2660 * valops.c (find_overload_match): Remove unused argument 'lax'.
2661 * value.h: Remove unused argument 'lax' from the declaration of
2662 find_overload_match.
2663 * eval.c (value_subexp_standard): Do not pass a 'lax' argument
2664 to find_overload_match.
2665 * valarith.c (value_user_defined_cpp_op): Do not pass a 'lax'
2666 argument to find_overload_match.
2668 2013-01-25 Tom Tromey <tromey@redhat.com>
2670 * dwarf2read.c (processing_has_namespace_info): Remove.
2671 (struct dwarf2_cu) <processing_has_namespace_info>: New field.
2672 (process_die, read_func_scope, dwarf2_start_symtab)
2673 (new_symbol_full): Update.
2675 2013-01-25 Tom Tromey <tromey@redhat.com>
2677 * cp-namespace.c (cp_set_block_scope): Remove.
2678 * cp-support.h (cp_set_block_scope): Remove.
2679 * dbxread.c: Include block.h.
2680 (cp_set_block_scope): New function.
2681 (process_one_symbol): Update.
2682 * dwarf2read.c (read_func_scope): Use block_set_scope.
2684 2013-01-25 Pedro Alves <palves@redhat.com>
2686 * remote.c (add_current_inferior_and_thread): Tweak comment.
2688 2013-01-25 Tom Tromey <tromey@redhat.com>
2690 * cp-namespace.c (cp_scan_for_anonymous_namespaces): Update.
2691 (cp_add_using_directive): Add 'copy_names' argument.
2692 * cp-support.h (cp_add_using_directive): Update.
2693 (struct using_direct) <import_src, import_dest, alias,
2694 declaration>: Now const.
2695 * dwarf2read.c (read_import_statement): Use obconcat.
2696 Don't copy names passed to cp_add_using_directive.
2698 2013-01-25 Tom Tromey <tromey@redhat.com>
2700 * c-exp.y (qualified_name): Use TYPE_SAFE_NAME.
2702 2013-01-25 Pedro Alves <palves@redhat.com>
2704 * remote.c (stop_reply_extract_thread): New.
2705 (add_current_inferior_and_thread): New parameter 'wait_status'.
2707 (remote_start_remote): Pass wait status to
2708 add_current_inferior_and_thread.
2709 (extended_remote_run): Update comment.
2710 (extended_remote_create_inferior_1): Pass wait status to
2711 add_current_inferior_and_thread.
2713 2013-01-25 Andrew Burgess <aburgess@broadcom.com>
2714 Ulrich Weigand <uweigand@de.ibm.com>
2716 * valarith.c (value_vector_widen): New function for replicating a
2717 scalar into a vector.
2718 (value_binop): Use value_vector_widen to widen scalar to vector
2719 rather than casting, this better matches gcc C behaviour.
2720 * valops.c (value_casst): Update logic for casting between vector
2721 types, and for casting from scalar to vector, try to match gcc C
2723 * value.h (value_vector_widen): Declare.
2724 * opencl-lang.c (opencl_value_cast): New opencl specific casting
2725 function, handle special case for casting scalar to vector.
2726 (opencl_relop): Use opencl_value_cast.
2727 (evaluate_subexp_opencl): Use opencl_value_cast instead of
2728 value_cast, and handle BINOP_ASSIGN, UNOP_CAST, and UNOP_CAST_TYPE
2729 in order to use opencl_value_cast.
2731 2013-01-25 Yao Qi <yao@codesourcery.com>
2733 * event-loop.c: Include "queue.h".
2734 (gdb_event_p): New typedef.
2735 (DECLARE_QUEUE_P): Use.
2736 (DEFINE_QUEUE_P): Use.
2737 (async_queue_event): Remove.
2738 (gdb_event_xfree): New.
2739 (initialize_event_loop): New.
2740 (process_event): Use QUEUE macros.
2741 (event_queue): Remove.
2742 (gdb_wait_for_event): Caller update.
2743 (check_async_event_handlers): Likewise.
2744 (poll_timers): Likewise.
2745 * event-loop.h (initialize_event_loop): Declare.
2746 * event-loop.c (gdb_event_xfree): New.
2747 * top.c (gdb_init): Call initialize_event_loop.
2749 2013-01-25 Yao Qi <yao@codesourcery.com>
2751 * event-loop.c (async_queue_event): Remove one parameter
2752 'position'. Remove code handling 'position' == TAIL.
2753 (gdb_wait_for_event): Caller update.
2754 (check_async_event_handlers): Caller update.
2755 (poll_timers): Caller update.
2756 * event-loop.h (enum queue_position): Remove.
2758 2013-01-25 Maxim Kuvyrkov <maxim@kugelworks.com>
2760 * MAINTAINERS: Update my email.
2762 2013-01-25 Yao Qi <yao@codesourcery.com>
2764 * main.c (print_gdb_help): Remove "--epoch" from the help
2767 2013-01-24 Ulrich Weigand <uweigand@de.ibm.com>
2769 * symtab.c (skip_prologue_using_sal): Consider a file
2770 change the same as an increased line number
2772 2013-01-24 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
2774 * MAINTAINERS (Write After Approval): Add myself to the list.
2776 2013-01-24 Tom Tromey <tromey@redhat.com>
2778 * ada-lang.h (ada_decode_symbol): Make return type const.
2779 * ada-lang.c (ada_decode_symbol): Likewise.
2781 2013-01-23 Doug Evans <dje@google.com>
2783 * linespec.c (find_linespec_symbols): Make static.
2785 2013-01-23 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
2787 * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value): Set correct
2788 type on float conversion for complex type.
2790 2013-01-23 Siva Chandra Reddy <sivachandra@google.com>
2792 Add a new class gdb.Architecture which exposes GDB's
2793 internal representation of architecture via GDB Python API.
2794 * Makefile.in: Add entries corresponding to the new file
2796 * NEWS (Python Scripting): Add entries for the new class
2797 gdb.Architecture and the new method gdb.Frame.architecture.
2798 * python/py-arch.c: Implement gdb.Architecture class.
2799 * python/py-frame.c (frapy_arch): Implement the method
2800 gdb.Frame.architecture().
2801 (frame_object_methods): Add 'architecture' to the method table.
2802 * python/python-internal.h: Add declarations of new utility
2804 * python/python.c (_initialize_python): Initialize
2805 gdb.Architecture class.
2807 2013-01-23 Doug Evans <dje@google.com>
2809 Work around binutils/15021.
2810 * dwarf2read.c (dwarf2_per_cu_data): Split imported_symtabs and
2811 type_unit_group out of union s. All uses updated.
2812 (read_index_from_section): Watch for index version 8.
2813 (follow_die_sig): If using .gdb_index version <= 7, record the TU as
2815 (write_psymtabs_to_index): Increment version number to 8.
2817 2013-01-22 Pedro Alves <palves@redhat.com>
2819 * annotate.c (breakpoint_changed): Skip if breakpoint is not
2822 2013-01-22 Pedro Alves <palves@redhat.com>
2824 * annotate.c (annotate_breakpoints_changed): Rename to ...
2825 (annotate_breakpoints_invalid): ... this. Make static.
2826 (breakpoint_changed): Adjust.
2827 (_initialize_annotate): Always install the observers. Install a
2828 "breakpoint_created" observer.
2829 * annotate.h (annotate_breakpoints_changed): Delete declaration.
2830 * breakpoint.c (set_breakpoint_condition)
2831 (breakpoint_set_commands, do_map_commands_command)
2832 (init_raw_breakpoint, clear_command, set_ignore_count)
2833 (enable_breakpoint_disp): No longer call
2834 annotate_breakpoints_changed.
2836 2013-01-22 Pedro Alves <palves@redhat.com>
2838 * annotate.c: Include "inferior.h".
2839 (frames_invalid_emitted)
2840 (breakpoints_invalid_emitted): New globals.
2841 (async_background_execution_p): New function.
2842 (annotate_breakpoints_changed, annotate_frames_invalid): Skip
2843 emitting the annotation if it has already been emitted.
2844 (annotate_display_prompt): New function.
2845 * annotate.h (annotate_display_prompt): New declaration.
2846 * event-top.c: Include annotate.h.
2847 (display_gdb_prompt): Call annotate_display_prompt.
2849 2013-01-22 Pedro Alves <palves@redhat.com>
2851 * annotate.c (ignore_count_changed): Delete.
2852 (annotate_breakpoints_changed): Don't clear ignore_count_changed.
2853 (annotate_ignore_count_change): Delete.
2854 (annotate_stopped): Don't emit a delayed breakpoints-changed
2856 * annotate.h (annotate_ignore_count_change): Delete.
2857 * breakpoint.c (bpstat_check_breakpoint_conditions): Don't call
2858 annotate_ignore_count_change.
2860 2013-01-22 Tom Tromey <tromey@redhat.com>
2862 * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>: Only
2863 require_rvalue for a register location.
2865 2013-01-21 Marc Khouzam <marc.khouzam@ericsson.com>
2867 * breakpoint.c (print_one_breakpoint_location): Add MI
2868 field 'thread-groups' when printing a breakpoint.
2869 (output_thread_groups): New function.
2871 2013-01-21 Siva Chandra Reddy <sivachandra@google.com>
2873 * python/lib/gdb/commands/explore.py
2874 (CompoundExplorer.explore_expr): Correct the name of a method
2876 (ExploreTypeCommand.invoke): Add a missing 'return'.
2878 2013-01-21 Tom Tromey <tromey@redhat.com>
2880 * gdb_obstack.h (obconcat): Move declaration here, from...
2881 * symfile.h (obconcat): ... here.
2882 * gdb_obstack.c: New file.
2883 (obconcat): Move from...
2884 * symfile.c (obconcat): ... here.
2885 * Makefile.in (SFILES): Add gdb_obstack.c.
2886 (COMMON_OBS): Add gdb_obstack.o.
2888 2013-01-21 Tom Tromey <tromey@redhat.com>
2890 * symfile.h (obsavestring): Don't declare.
2891 * symfile.c (obsavestring): Remove.
2892 * ada-exp.y: Use obstack_copy0, not obsavestring.
2893 * ada-lang.c: Use obstack_copy0, not obsavestring.
2894 * coffread.c: Use obstack_copy0, not obsavestring.
2895 * cp-namespace.c: Use obstack_copy0, not obsavestring.
2896 * dbxread.c: Use obstack_copy0, not obsavestring.
2897 * dwarf2read.c: Use obstack_copy0, not obsavestring.
2898 * jit.c: Use obstack_copy0, not obsavestring.
2899 * mdebugread.c: Use obstack_copy0, not obsavestring.
2900 * psymtab.c: Use obstack_copy0, not obsavestring.
2901 * stabsread.c: Use obstack_copy0, not obsavestring.
2902 * xcoffread.c: Use obstack_copy0, not obsavestring.
2904 2013-01-21 Tom Tromey <tromey@redhat.com>
2906 * dwarf2read.c (fixup_go_packaging): Save package name
2908 * gdbtypes.c (init_type): Don't copy name.
2910 2013-01-21 Tom Tromey <tromey@redhat.com>
2912 * dwarf2read.c (struct partial_die_info) <name, scope>: Now
2914 (struct attribute) <u.str>: Now const.
2915 (struct fnfieldlist) <name>: Now const.
2916 (dw2_get_file_names_reader, init_cutu_and_read_dies): Update.
2917 (partial_die_parent_scope): Make return type const.
2918 (partial_die_full_name, add_partial_symbol): Update.
2919 (dwarf2_compute_name, dwarf2_full_name, dwarf2_physname): Make
2921 (find_file_and_directory): Make 'name' and 'comp_dir' const.
2922 (read_file_scope, read_func_scope, dwarf2_add_field)
2923 (dwarf2_add_member_fn, read_structure_type)
2924 (process_enumeration_scope, read_array_type, read_module_type)
2925 (read_base_type, read_subrange_type): Update.
2926 (dwarf2_start_symtab): Make 'name' and 'comp_dir' const.
2927 (new_symbol_full, guess_full_die_structure_name): Update.
2928 (dwarf2_canonicalize_name): Return const type. Make 'name' const.
2929 (dwarf2_name): Return const type.
2930 (dwarf_decode_macro_bytes, dwarf_decode_macros): Make 'comp_dir'
2933 2013-01-21 Tom Tromey <tromey@redhat.com>
2935 * gdbtypes.c (init_type): Make 'name' const.
2936 * gdbtypes.h (init_type): Update.
2938 2013-01-21 Tom Tromey <tromey@redhat.com>
2940 * buildsym.c (patch_subfile_names): Use set_last_source_file.
2941 (start_symtab): Make 'name' and 'dirname' const. Use
2942 set_last_source_file.
2943 (restart_symtab, reset_symtab_globals): Use set_last_source_file.
2944 (last_source_file): Define. Now static.
2945 (set_last_source_file, get_last_source_file): New functions.
2946 * buildsym.h (last_source_file): Don't declare.
2947 (start_symtab): Update.
2948 (set_last_source_file, get_last_source_file): Declare.
2949 * coffread.c (complete_symtab): Use set_last_source_file.
2950 (coff_end_symtab): Likewise.
2951 (coff_symtab_read): Use set_last_source_file, get_last_source_file.
2952 * dbxread.c (read_dbx_symtab, read_ofile_symtab): Use
2953 set_last_source_file.
2954 (process_one_symbol): Use get_last_source_file.
2955 * mdebugread.c (parse_partial_symbols): Use set_last_source_file.
2956 (psymtab_to_symtab_1): Use get_last_source_file.
2957 * xcoffread.c (process_linenos): Use get_last_source_file.
2958 (complete_symtab): Use set_last_source_file.
2959 (read_xcoff_symtab): Use set_last_source_file, get_last_source_file.
2960 (scan_xcoff_symtab): Use set_last_source_file.
2962 2013-01-21 Tom Tromey <tromey@redhat.com>
2964 * symtab.c (struct demangled_name_entry) <mangled>: Now const.
2965 (symbol_set_names): Remove casts. Handle field const-ness.
2967 2013-01-21 Tom Tromey <tromey@redhat.com>
2969 * dwarf2read.c (new_symbol_full): Remove cast.
2970 * symtab.c (symbol_set_demangled_name): Make 'name' const.
2971 * symtab.h (symbol_set_demangled_name): Update.
2973 2013-01-21 Tom Tromey <tromey@redhat.com>
2975 * main.c (captured_main): Call bfd_init.
2977 2013-01-21 Tom Tromey <tromey@redhat.com>
2979 * gnu-v2-abi.c (_initialize_gnu_v2_abi): Don't set default ABI.
2980 * gnu-v3-abi.c (_initialize_gnu_v3_abi): Set default ABI.
2981 * minsyms.c (install_minimal_symbols): Don't check for _Z symbols.
2984 2013-01-21 Jan Kratochvil <jan.kratochvil@redhat.com>
2986 * symmisc.c (maintenance_print_msymbols): Check also ST_DEV.
2988 2013-01-21 Jan Kratochvil <jan.kratochvil@redhat.com>
2990 Fix gdb.fortran/common-block.exp crash in PIE mode.
2991 * dwarf2read.c (new_symbol_full) <DW_TAG_common_block>: Use
2993 * f-valprint.c (info_common_command_for_block): Expect
2994 LOC_COMMON_BLOCK in gdb_assert.
2995 * symtab.h (struct general_symbol_info): Update comment for the
2996 common_block member.
2997 (domain_enum): Extend comment for the COMMON_BLOCK_DOMAIN member.
2998 (enum address_class): New member LOC_COMMON_BLOCK.
3000 2013-01-18 David Blaikie <dblaikie@gmail.com>
3002 * MAINTAINERS (Write After Approval): Add "David Blaikie".
3004 2013-01-18 Tom Tromey <tromey@redhat.com>
3007 * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>:
3008 Call require_rvalue.
3010 2013-01-18 Yao Qi <yao@codesourcery.com>
3012 * dbxread.c (dbx_psymtab_to_symtab): Delete the declaration.
3013 (dbx_read_symtab): New declaration.
3014 (dbx_psymtab_to_symtab): Delete.
3015 (dbx_read_symtab): Rename from dbx_psymtab_to_symtab.
3016 Rename parameter PST to SELF. Exchanged two parameters.
3017 (start_psymtab): Caller update.
3018 * dwarf2read.c (dwarf2_psymtab_to_symtab): Delete the declaration.
3019 (dwarf2_read_symtab): New declaration.
3020 (dwarf2_psymtab_to_symtab): Delete.
3021 (dwarf2_read_symtab): Rename from dwarf2_psymtab_to_symtab.
3022 Rename parameter PST to SELF. Exchanged two parameters.
3023 (create_partial_symtab): Caller update.
3024 * mdebugread.c (mdebug_psymtab_to_symtab): Delete.
3025 (mdebug_read_symtab): Rename from mdebug_psymtab_to_symtab.
3026 Rename parameter PST to SELF. Exchanged two parameters.
3027 (parse_partial_symbols, new_psymtab): Caller update.
3028 * psympriv.h (struct partial_symtab) <read_symtab>: Exchange
3030 * psymtab.c (psymtab_to_symtab): Caller update.
3031 * xcoffread.c (xcoff_psymtab_to_symtab): Delete.
3032 (xcoff_read_symtab): Rename from xcoff_psymtab_to_symtab.
3033 Rename parameter PST to SELF. Exchanged two parameters.
3034 (xcoff_start_psymtab): Caller update.
3036 2013-01-18 Yao Qi <yao@codesourcery.com>
3038 * infrun.c (proceed): Rename local variable 'oneproc' to
3041 2013-01-17 Doug Evans <dje@google.com>
3043 * dwarf2read.c (dw2_build_type_unit_groups_reader): Delete.
3044 (dw2_build_type_unit_groups): Delete. All uses updated.
3046 * symtab.h (struct symbol_search): Add comment.
3048 2013-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
3050 * symtab.c (compare_filenames_for_search): New comment for
3053 2013-01-17 Tom Tromey <tromey@redhat.com>
3055 * cp-abi.c (cp_abi_completer): Fix typo in assignment.
3057 2013-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
3059 * symtab.c (iterate_over_some_symtabs): New variable cleanups,
3060 initialize it by existing make_cleanup. Call new do_cleanups.
3062 2013-01-17 Tom Tromey <tromey@redhat.com>
3064 * cp-abi.c (cp_abi_completer): New function.
3065 (_initialize_cp_abi): Set completer for "set cp-abi".
3067 2013-01-17 Tom Tromey <tromey@redhat.com>
3069 * mem-break.c: Remove obsolete comment.
3070 * bfin-tdep.c (bfin_breakpoint_from_pc): Fix comment.
3072 2012-01-17 Sanjoy Das <sanjoy@playingwithpointers.com>
3074 * jit.c (jit_reader_load_command): Interpret the jit reader name
3075 as an absolute path if it begins with a forward slash.
3077 2012-01-17 Sanjoy Das <sanjoy@playingwithpointers.com>
3081 * jit.c (finalize_symtab): Ensure that only the global block has a
3084 2013-01-17 Pedro Alves <palves@redhat.com>
3086 * acinclude.m4: Include ../config/plugins.m4,
3087 ../config/largefile.m4 and ../config/lead-dot.m4. Add comments.
3088 * Makefile.in (aclocal_m4_deps): Update.
3089 * aclocal.m4: Renegerate.
3091 2013-01-16 Doug Evans <dje@google.com>
3093 * contrib/cc-with-tweaks.sh: Add references to Fission docs.
3095 2013-01-16 Pedro Alves <palves@redhat.com>
3096 Tom Tromey <tromey@redhat.com>
3099 * NEWS: Add "catch signal".
3100 * breakpoint.c (base_breakpoint_ops): No longer static.
3101 (bpstat_explains_signal): New function.
3102 (init_catchpoint): No longer static.
3103 (base_breakpoint_explains_signal): New function.
3104 (base_breakpoint_ops): Initialize new field.
3105 * breakpoint.h (enum bpstat_signal_value): New.
3106 (struct breakpoint_ops) <explains_signal>: New field.
3107 (bpstat_explains_signal): Remove macro, declare as function.
3108 (base_breakpoint_ops, init_catchpoint): Declare.
3109 * break-catch-sig.c: New file.
3110 * inferior.h (signal_catch_update): Declare.
3111 * infrun.c (signal_catch): New global.
3112 (handle_syscall_event): Update for change to
3113 bpstat_explains_signal.
3114 (handle_inferior_event): Likewise. Always handle random signals
3116 (signal_cache_update): Check signal_catch.
3117 (signal_catch_update): New function.
3118 (_initialize_infrun): Initialize signal_catch.
3119 * Makefile.in (SFILES): Add break-catch-sig.c.
3120 (COMMON_OBS): Add break-catch-sig.o.
3122 2013-01-16 Tom Tromey <tromey@redhat.com>
3124 * breakpoint.c (print_one_catch_fork, print_one_catch_vfork)
3125 (print_one_catch_solib, print_one_catch_syscall)
3126 (print_one_catch_exec, print_one_exception_catchpoint): Emit
3129 2013-01-16 Yao Qi <yao@codesourcery.com>
3131 * printcmd.c (current_display_number): Make it static.
3133 2013-01-16 Yao Qi <yao@codesourcery.com>
3135 * infcmd.c (step_once): Don't check '!single_inst' as it was
3138 2013-01-15 Jan Kratochvil <jan.kratochvil@redhat.com>
3140 * dwarf2read.c (psymtab_include_file_name): Extend the function comment.
3142 2013-01-14 Tom Tromey <tromey@redhat.com>
3144 * cli/cli-decode.c (add_setshow_string_noescape_cmd): Return the
3146 * command.h (add_setshow_string_noescape_cmd): Update.
3147 * corefile.c (set_gnutarget_command): Remove trailing whitespace.
3148 (complete_set_gnutarget): New function.
3149 (_initialize_core): Set the "set gnutarget" completer.
3151 2013-01-14 Tom Tromey <tromey@redhat.com>
3154 * c-typeprint.c (cp_type_print_method_args): Handle 'restrict'.
3155 (c_type_print_modifier): Likewise.
3156 * dwarf2read.c (read_tag_restrict_type): New function.
3157 (read_type_die_1): Handle DW_TAG_restrict_type.
3158 * gdbtypes.c (make_restrict_type): New function.
3159 (recursive_dump_type): Handle TYPE_RESTRICT.
3160 * gdbtypes.h (enum type_flag_values): Renumber.
3161 (enum type_instance_flag_value): Add
3162 TYPE_INSTANCE_FLAG_RESTRICT.
3163 (TYPE_RESTRICT): New macro.
3164 (make_restrict_type): Declare.
3166 2013-01-14 Tom Tromey <tromey@redhat.com>
3169 * psymtab.c (struct psymtab_state): New.
3170 (discard_psymtabs_upto, make_cleanup_discard_psymtabs): New
3172 * psympriv.h (make_cleanup_discard_psymtabs): Declare.
3173 * dwarf2read.c (dwarf2_build_psymtabs): Catch exceptions.
3175 2013-01-14 Richard Sharman <richard_sharman@mitel.com>
3176 Pedro Alves <palves@redhat.com>
3180 * remote.c (remote_threads_info): Make a copy of the reply from
3181 qfThreadInfo and use that instead of rs->buf.
3183 2013-01-14 Yao Qi <yao@codesourcery.com>
3185 * dbxread.c (dbx_psymtab_to_symtab_1): Don't check PST is NULL.
3186 (dbx_psymtab_to_symtab): Likewise.
3187 * dwarf2read.c (dwarf2_psymtab_to_symtab): Likewise.
3188 * mdebugread.c (mdebug_psymtab_to_symtab): Likewise.
3189 * xcoffread.c (xcoff_psymtab_to_symtab_1): Likewise.
3191 2013-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
3193 * parse.c (parse_exp_in_context): New variable inner_chain. Call
3194 make_cleanup_restore_current_language. Call set_language. Move
3195 OLD_CHAIN and INNER_CHAIN cleanups.
3196 * utils.c (do_restore_current_language)
3197 (make_cleanup_restore_current_language): New functions.
3198 * utils.h (make_cleanup_restore_current_language): New declaration.
3200 2013-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
3202 * source.c (symtab_to_fullname): Apply rewrite_source_path also for
3205 * source.c (symtab_to_fullname): Do not prepend DIRNAME for
3206 non-existing files if FILENAME is already absolute.
3208 2013-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3210 * macrocmd.c (macro_inform_no_debuginfo): Use puts_filtered instead of
3211 fputs_filtered. Append trailing newline.
3213 2013-01-11 Yao Qi <yao@codesourcery.com>
3214 Stan Shebs <stan@codesourcery.com>
3216 * psymtab.c (init_psymbol_list): Clarify the comment.
3218 2013-01-11 Yao Qi <yao@codesourcery.com>
3220 * breakpoint.c (print_one_breakpoint_location): Remove dead code.
3221 (update_dprintf_command_list): Assert that 'printf_line' is
3222 non-null. Remove condition check.
3224 2013-01-10 Jan Kratochvil <jan.kratochvil@redhat.com>
3227 * psymtab.c (psymtab_to_fullname, psymtab_to_fullname): Make the return
3229 * tui/tui-source.c (tui_source_is_displayed): Make the parameter fname
3231 * tui/tui-source.h (tui_source_is_displayed): Likewise.
3233 2013-01-09 Anthony Green <green@moxielogic.com>
3235 * cp-abi.c (cplus_print_vtable): Don't return value from void
3237 * ada-lang.c (re_set_catch_assert): Ditto.
3239 2013-01-09 Doug Evans <dje@google.com>
3241 * symfile.h (quick_symbol_functions): Delete member
3242 pre_expand_symtabs_matching. All uses removed.
3243 * dwarf2read.c (dw2_lookup_symbol): Implement.
3244 (dw2_do_expand_symtabs_matching): Delete.
3245 (dw2_pre_expand_symtabs_matching): Delete.
3246 (struct dw2_symtab_iterator): New type.
3247 (dw2_symtab_iter_init, dw2_symtab_iter_next): New functions.
3248 (dw2_expand_symtabs_for_function): Rewrite.
3249 (dwarf2_gdb_index_functions): Update.
3250 * psymtab.c (pre_expand_symtabs_matching_psymtabs): Delete.
3251 (psym_functions): Update.
3253 2013-01-09 Tom Tromey <tromey@redhat.com>
3255 * config/pa/hpux.mh (NATDEPFILES): Remove somread.o.
3256 * configure: Rebuild.
3257 * configure.ac: Add somread.o to the build if BFD has SOM
3259 * somread.c: Include som/aout.h, not syms.h.
3260 (som_symtab_read): Use som_external_symbol_dictionary_record.
3261 Unpack records manually.
3262 (_initialize_somread): Declare.
3264 2012-01-08 Mike Frysinger <vapier@gentoo.org>
3266 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx) [__x86_64__]:
3267 Cast return_address to 64bits.
3269 2013-01-08 Hui Zhu <hui_zhu@mentor.com>
3271 * printcmd.c: Remove define of function output_command.
3272 * tracepoint.c: Remove extern of function output_command.
3273 * valprint.h: (output_command): New extern.
3275 2013-01-07 Tom Tromey <tromey@redhat.com>
3277 * objc-lang.c (objc_emit_char, objc_printchar, objc_printstr):
3279 (objc_language_defn): Use c_printchar, c_printstr,
3282 2013-01-07 Tom Tromey <tromey@redhat.com>
3286 * ada-valprint.c (printstr, print_field_values): Remove
3288 * cp-valprint.c (cp_print_value_fields): Remove "inspect_it"
3290 * jv-valprint.c (java_print_value_fields): Remove "inspect_it"
3292 * m2-lang.c (m2_printstr): Remove "inspect_it" code.
3293 * main.c (captured_main): Remove "epoch" argument.
3294 * objc-lang.c (objc_printstr): Remove "inspect_it" code.
3295 * p-lang.c (pascal_printstr): Remove "inspect_it" code.
3296 * p-valprint.c (pascal_object_print_value_fields): Remove
3298 * printcmd.c (print_command_1): Remove 'inspect' argument.
3299 (print_command, call_command): Update.
3300 (inspect_command): Remove.
3301 (_initialize_printcmd): Make "inspect" an alias for "print".
3302 * top.c (epoch_interface): Remove.
3303 * top.h (epoch_interface): Remove.
3304 * valprint.c (user_print_options): Update.
3305 (print_converted_chars_to_obstack): Remove "inspect_it" code.
3306 * valprint.h (struct value_print_options) <inspect_it>: Remove
3309 2013-01-04 Tom Tromey <tromey@redhat.com>
3311 * valprint.h (read_string): Add 'extern'.
3313 2013-01-07 Joel Brobecker <brobecker@adacore.com>
3315 * darwin-nat.c: Fix typo in TASK_DYLD_INFO_COUNT macro test
3316 used to decide whether to define darwin_read_dyld_info or not.
3318 2013-01-03 Pierre Muller <muller@sourceware.org>
3320 * main.c (relocate_gdb_directory): Avoid calling stat function
3323 2013-01-03 Yao Qi <yao@codesourcery.com>
3325 * psymtab.c (fixup_psymbol_section): Update declaration.
3326 (fixup_psymbol_section): Remove code returning value.
3328 2013-01-03 Yao Qi <yao@codesourcery.com>
3330 * symtab.h: Remove some out of date comments.
3331 (enum exception_event_kind): Move it ...
3332 * breakpoint.c: ... here.
3334 2013-01-02 Iain Sandoe <developer@sandoe-acoustics.co.uk>
3337 * darwin-nat.c (darwin_read_dyld_info): Only build if
3338 TASK_DYLD_INFO_COUNT is defined.
3339 (darwin_xfer_partial): Call darwin_read_dyld_info only if
3340 TASK_DYLD_INFO_COUNT is defined.
3342 2013-01-02 Tom Tromey <tromey@redhat.com>
3344 * symfile.h (struct ecoff_debug_hack): Remove.
3345 * objfiles.c: Don't include mdebugread.h.
3347 2013-01-02 Tom Tromey <tromey@redhat.com>
3349 * config/i386/darwin.mh (NATDEPFILES): Remove machoread.o.
3350 * configure.ac: Check for Mach-O support in BFD. Update
3352 * configure: Rebuild.
3354 2013-01-02 Tom Tromey <tromey@redhat.com>
3356 * acinclude.m4 (GDB_AC_CHECK_BFD): New macro.
3357 * configure.ac: Use GDB_AC_CHECK_BFD.
3358 * configure: Rebuild.
3360 2013-01-01 Maxim Kuvyrkov <maxim.kuvyrkov@gmail.com>
3362 * MAINTAINERS: Update my email.
3364 2013-01-01 Joel Brobecker <brobecker@adacore.com>
3366 * cli/cli-script.h (make_cleanup_free_command_lines): Make extern.
3368 2013-01-01 Joel Brobecker <brobecker@adacore.com>
3370 * rs6000-nat.c (bss_data_overlap): New function.
3371 (vmap_symtab): Use it to adjust the .bss section's offset.
3373 2013-01-01 Joel Brobecker <brobecker@adacore.com>
3375 Update year range in copyright notice of all files.
3377 2013-01-01, 13 Joel Brobecker <brobecker@adacore.com>
3379 * top.c (print_gdb_version): Update copyright year.
3381 For older changes see ChangeLog-2012.
3387 version-control: never