1 2013-03-20 Tom Tromey <tromey@redhat.com>
3 * psymtab.c (find_pc_sect_psymbol, fixup_psymbol_section)
4 (print_partial_symbols, recursively_search_psymtabs): Use
7 2013-03-20 Pierre Muller <muller@sourceware.org>
9 * contrib/ari/gdb_ari.sh (OP eol rule): Also check
10 addtion, subtraction, multiplication and division binary operator.
12 2013-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
15 * bfd-target.c (target_bfd_xclose): Remove parameter quitting.
16 * bsd-kvm.c (bsd_kvm_close): Likewise.
17 * bsd-uthread.c (bsd_uthread_close): Likewise.
18 * corelow.c (core_close): Likewise.
19 (core_close_cleanup): Remove parameter quitting from a caller.
20 * event-top.c (async_disconnect): Likewise.
21 * exec.c (exec_close_1): Remove parameter quitting.
22 * go32-nat.c (go32_close): Likewise.
23 * linux-nat.c (linux_nat_close): Remove parameter quitting. Remove
24 parameter quitting from a caller.
25 * mips-linux-nat.c (super_close): Remove parameter quitting from the
27 (mips_linux_close): Remove parameter quitting. Remove parameter
28 quitting from a caller.
29 * monitor.c (monitor_close): Remove parameter quitting.
30 * monitor.h (monitor_close): Likewise.
31 * record-btrace.c (record_btrace_close): Likewise.
32 * record-full.c (record_full_close): Likewise.
33 * remote-m32r-sdi.c (m32r_close): Remove parameter quitting and remove
34 it also from fprintf_unfiltered.
35 * remote-mips.c (mips_close): Remove parameter quitting.
36 (mips_detach): Remove parameter quitting from a caller.
37 * remote-sim.c (gdbsim_close): Remove parameter quitting.
38 (gdbsim_close): Remove duplicate function comment. Remove parameter
39 quitting and remove it also from printf_filtered.
40 * remote.c (remote_close): Remove parameter quitting.
41 * solib-svr4.c (enable_break): Remove parameter quitting from a caller.
42 * target.c (update_current_target): Remove parameter int from to_close
44 (push_target, unpush_target, pop_target): Remove parameter quitting from
46 (pop_all_targets_above, pop_all_targets): Remove parameter quitting.
47 Remove parameter quitting from a caller.
48 (target_preopen): Remove parameter quitting from a caller.
49 (target_close): Remove parameter quitting. Remove parameter quitting
50 from a caller two times. Remove parameter quitting also from
52 * target.h (struct target_ops): Remove parameter quitting and as int
53 from fields to_xclose and to_close.
54 (extern struct target_ops current_target):
55 (target_close, pop_all_targets): Remove parameter quitting. Update the
57 (pop_all_targets_above): Remove parameter quitting.
58 * top.c (quit_target): Remove parameter quitting from a caller.
59 * tracepoint.c (tfile_close): Remove parameter quitting.
60 * windows-nat.c (windows_close): Remove parameter quitting.
62 2013-03-20 Corinna Vinschen <vinschen@redhat.com>
64 * windows-nat.c (handle_output_debug_string): Replace call
65 to string_to_core_addr with call to strtoull.
67 2013-03-20 Yao Qi <yao@codesourcery.com>
69 * ctf.c (ctf_save_metadata_header): Define macro HOST_ENDIANNESS
70 and write it to CTF metadata.
72 2013-03-19 Corinna Vinschen <vinschen@redhat.com>
74 * windows-nat.c (handle_output_debug_string): Change type of n to
75 SIZE_T to avoid crash on 64 bit systems.
77 2013-03-17 Eli Zaretskii <eliz@gnu.org>
79 * python/python-internal.h (HAVE_SNPRINTF)
80 [_WIN32 && HAVE_DECL_SNPRINTF]: Define, to avoid compiler warnings
81 about redefinition of snprintf by pyerrors.h.
83 2013-03-15 Steve Ellcey <sellcey@mips.com>
85 * remote-sim.c (sim_command_completer): Make char arguments const.
87 2013-03-15 Tom Tromey <tromey@redhat.com>
90 * gdbtypes.c (types_equal): Handle TYPE_CODE_FUNC.
92 2013-03-14 Tom Tromey <tromey@redhat.com>
94 * gdb_bfd.c (struct gdb_bfd_data) <crc_computed, crc>:
96 (get_file_crc): Move from symfile.c.
97 (gdb_bfd_crc): New function.
98 * gdb_bfd.h (gdb_bfd_crc): Declare.
99 * objfiles.h (struct objfile) <crc32, crc32_p>: Remove.
100 * symfile.c (get_file_crc): Move to gdb_bfd.c.
101 (separate_debug_file_exists): Use gdb_bfd_crc.
103 2013-03-14 Tom Tromey <tromey@redhat.com>
105 * symfile.c (get_debug_link_info): Remove.
106 (find_separate_debug_file_by_debuglink): Use
107 bfd_get_debug_link_info.
109 2013-03-14 Tom Tromey <tromey@redhat.com>
111 * symtab.c (error_in_psymtab_expansion): New function.
112 (lookup_symbol_aux_quick)
113 (basic_lookup_transparent_type_quick): Remove "last resort"
114 code. Use error_in_psymtab_expansion.
116 2013-03-14 Doug Evans <dje@google.com>
117 Jan Kratochvil <jan.kratochvil@redhat.com>
119 * dwarf2read.c (dw2_map_symtabs_matching_filename): Put continue after
120 any successful compare_filenames_for_search or FILENAME_CMP.
121 * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
122 * symtab.c (iterate_over_some_symtabs): Likewise.
124 2013-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
126 * source.c (print_source_lines_base): Make a local copy of
129 2013-03-14 Hui Zhu <hui_zhu@mentor.com>
130 Jan Kratochvil <jan.kratochvil@redhat.com>
132 * source.c (print_source_lines_base): Suppress "file" for TUI.
134 2013-03-14 Keith Seitz <keiths@redhat.com>
135 Alan Matsuoka <alanm@redhat.com>
139 * cp-namespace.c (cp_lookup_nested_symbol): Handle TYPE_CODE_FUNC and
141 * elfread.c (elf_symtab_read): Handle BSF_GNU_UNIQUE for certain
144 2013-03-14 Yao Qi <yao@codesourcery.com>
146 * tracepoint.c (tfile_write_status): Write 'stop_desc' of trace
147 status to tfile if trace is stopped by command 'tstop'.
149 2013-03-14 Yao Qi <yao@codesourcery.com>
151 * tracepoint.c (tfile_write_status): Write trace notes and user
152 name into tfile if they are not NULL.
154 2013-03-14 Hui Zhu <hui@codesourcery.com>
155 Yao Qi <yao@codesourcery.com>
157 * Makefile.in (REMOTE_OBS): Add ctf.o.
159 (HFILES_NO_SRCDIR): Add ctf.h.
160 * ctf.c, ctf.h: New files.
161 * tracepoint.c: Include 'ctf.h'.
162 (collect_pseudocommand): Remove static.
163 (trace_save_command): Parse option "-ctf".
164 Produce different trace file writers per option.
165 Adjust output message.
166 (trace_save_tfile, trace_save_ctf): New.
167 * tracepoint.h (trace_save_tfile, trace_save_ctf): Declare.
168 * mi/mi-main.c: Include 'ctf.h'.
169 (mi_cmd_trace_save): Handle option '-ctf'. Call either
170 trace_save_tfile or trace_save_ctf.
171 * NEWS: Mention these changes.
173 2013-03-14 Yao Qi <yao@codesourcery.com>
175 * tracepoint.c (trace_file_writer_xfree): New.
176 (struct tfile_writer_data): New.
177 (tfile_dtor, tfile_can_target_save, tfile_start): New.
178 (tfile_write_header, tfile_write_regblock_type): New.
179 (tfile_write_status, tfile_write_uploaded_tsv): New.
180 (tfile_write_uploaded_tp, tfile_write_definition_end): New.
181 (tfile_write_raw_data, (tfile_end): New.
182 (tfile_write_ops): New global variable.
183 (TRACE_WRITE_R_BLOCK): New macro.
184 (TRACE_WRITE_M_BLOCK_HEADER): New macro.
185 (TRACE_WRITE_M_BLOCK_MEMORY): New macro.
186 (TRACE_WRITE_V_BLOCK): New macro.
187 (trace_save): Add extra one parameter WRITER. Make it static.
188 Use WRITER to writer trace.
189 (tfile_trace_file_writer_new): New.
190 (trace_save_command): Caller update.
191 (trace_save_tfile): Write trace data in TFILE format.
192 * tracepoint.h (struct trace_frame_write_ops): New.
193 (struct trace_file_write_ops): New.
194 (struct trace_file_writer): New.
195 (trace_save): Remove its declaration.
196 (trace_save_tfile): Declare it.
197 * mi/mi-main.c (mi_cmd_trace_save): Call trace_save_tfile
198 instead of trace_save.
200 2013-03-13 Pedro Alves <palves@redhat.com>
202 * hppa-hpux-nat.c (hppa_hpux_save_state_offset): Make static.
204 2013-03-13 Pedro Alves <palves@redhat.com>
206 * dbxread.c (read_ofile_symtab, process_one_symbol): Remove
208 * demangle.c (current_demangling_style_string): Make it const.
209 (set_demangling_command): Assert the demangling style is known.
210 Remove all handling of unknown styles. Set
211 'current_demangling_style_string' to an element of the
212 demangling_style_names array.
213 (set_demangling_style): Delete.
214 (_initialize_demangler): Set current_demangling_style_string to the
215 element of the demangling_style_names array that corresponds to
216 the default demangling style. Remove FIXME note. Don't call
217 set_demangling_style.
218 * gdb-demangle.h (set_demangling_style): Remove declaration.
220 2013-03-13 Pedro Alves <palves@redhat.com>
222 * ada-lang.c (struct add_partial_datum) <text, text0, word>: Make
224 (ada_make_symbol_completion_list): Make "text0" parameter const.
225 * ax-gdb.c (agent_eval_command_one): Make "exp" parameter const.
226 * breakpoint.c (condition_completer): Make "text" and "word"
227 parameters const. Adjust.
228 (check_tracepoint_command): Adjust to validate_actionline
230 (catch_syscall_completer): Make "text" and "word" parameters
232 * cli/cli-cmds.c (show_user): Make "comname" local const.
233 (valid_command_p): Make "command" parameter const.
234 (alias_command): Make "alias_prefix" and "command_prefix" locals
236 * cli/cli-decode.c (add_cmd): Make "name" parameter const.
237 (add_alias_cmd): Make "name" and "oldname" parameters const.
238 Adjust. No longer make copy of OLDNAME.
239 (add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd)
240 (add_setshow_cmd_full, add_setshow_enum_cmd)
241 (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
242 (add_setshow_filename_cmd, add_setshow_string_cmd)
243 (add_setshow_string_noescape_cmd)
244 (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
245 (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
246 (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd)
247 (delete_cmd, add_info, add_info_alias, add_com, add_com_alias):
248 Make "name" parameter const.
249 (help_cmd): Rename "command" parameter to "arg". New const local
251 (find_cmd): Make "command" parameter const.
252 (lookup_cmd_1): Make "text" parameter pointer to const. Adjust to
253 deprecated_cmd_warning prototype change.
254 (undef_cmd_error): Make "cmdtype" parameter const.
255 (lookup_cmd): Make "line" parameter const.
256 (deprecated_cmd_warning): Change type of "text" parameter to
257 pointer to const char, from pointer to pointer to char. Adjust.
258 (lookup_cmd_composition): Make "text" parameter const.
259 (complete_on_cmdlist, complete_on_enum): Make "text" and "word"
261 * cli/cli-decode.h (struct cmd_list_element) <name>: Make field
263 * cli/cli-script.c (validate_comname): Make "tem" local const.
264 (define_command): New const local "tem_c". Use it in calls to
266 (document_command): Make "tem" and "comfull" locals const.
267 (show_user_1): Make "prefix" and "name" parameters const.
268 * cli-script.h (show_user_1): Make "prefix" and "name" parameters
270 * command.h (add_cmd, add_alias_cmd, add_prefix_cmd)
271 (add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1)
272 (deprecated_cmd_warning, lookup_cmd_composition, add_com)
273 (add_com_alias, add_info, add_info_alias, complete_on_cmdlist)
274 (complete_on_enum, add_setshow_enum_cmd)
275 (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
276 (add_setshow_filename_cmd, add_setshow_string_cmd)
277 (add_setshow_string_noescape_cmd)
278 (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
279 (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
280 (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
281 Change prototypes, constifying strings.
282 * completer.c (noop_completer, filename_completer): Make "text"
283 and "prefix" parameters const.
284 (location_completer, expression_completer)
285 (complete_line_internal): Make "text" and "prefix" parameters
287 (command_completer, signal_completer): Make "text" and "prefix"
289 * completer.h (noop_completer, filename_completer)
290 (expression_completer, location_completer, command_completer)
291 (signal_completer): Change prototypes.
292 * corefile.c (complete_set_gnutarget): Make "text" and "word"
294 * cp-abi.c (cp_abi_completer): Likewise.
295 * expression.h (parse_expression_for_completion): Change
297 * f-lang.c (f_make_symbol_completion_list): Make "text" and "word"
299 * infcmd.c (_initialize_infcmd): Make "cmd_name" local const.
300 * infrun.c (handle_completer): Make "text" and "word" parameters
302 * interps.c (interpreter_completer): Make "text" and "word"
304 * language.h (struct language_defn)
305 <la_make_symbol_completion_list>: Make "text" and "word"
307 * parse.c (parse_exp_1): Move const hack to parse_exp_in_context.
308 (parse_exp_in_context): Rename to ...
309 (parse_exp_in_context_1): ... this.
310 (parse_exp_in_context): Reimplement, with const hack from
312 (parse_expression_for_completion): Make "string" parameter const.
313 * printcmd.c (decode_format): Make "string_ptr" parameter pointer
314 to pointer to const char. Adjust.
315 (print_command_1): Make "exp" parameter const.
316 (output_command): Rename to ...
317 (output_command_const): ... this. Make "exp" parameter const.
318 (output_command): Reimplement.
320 (display_command): Rename "exp" parameter to "arg". New "exp"
321 local, const version of "arg".
322 * python/py-auto-load.c (gdbpy_initialize_auto_load): Make
323 "cmd_name" local const.
324 * python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree
326 (cmdpy_completer): Make "text" and "word" parameters const.
327 (gdbpy_parse_command_name): Make "prefix_text2" local const.
328 * python/py-param.c (add_setshow_generic): Make "tmp_name" local
330 * remote.c (_initialize_remote): Make "cmd_name" local const.
331 * symtab.c (language_search_unquoted_string): Make "text" and "p"
332 parameters const. Adjust.
333 (completion_list_add_fields): Make "sym_text", "text" and "word"
335 (struct add_name_data) <sym_text, text, word>: Make fields const.
336 (default_make_symbol_completion_list_break_on): Make "text" and
337 "word" parameters const. Adjust locals.
338 (default_make_symbol_completion_list)
339 (make_symbol_completion_list, make_symbol_completion_type)
340 (make_symbol_completion_list_fn): Make "text" and "word"
342 (make_file_symbol_completion_list): Make "text", "word" and
343 "srcfile" parameters const. Adjust locals.
344 (add_filename_to_list): Make "text" and "word" parameters const.
345 (struct add_partial_filename_data) <text, word>: Make fields
347 (make_source_files_completion_list): Make "text" and "word"
349 * symtab.h (default_make_symbol_completion_list_break_on)
350 (default_make_symbol_completion_list, make_symbol_completion_list)
351 (make_symbol_completion_type enum type_code)
352 (make_symbol_completion_list_fn make_file_symbol_completion_list)
353 (make_source_files_completion_list): Change prototype.
354 * top.c (execute_command): Adjust to pass pointer to pointer to
355 const char to lookup_cmd, and to deprecated_cmd_warning prototype
357 (set_verbose): Make "cmdname" local const.
358 * tracepoint.c (decode_agent_options): Make "exp" parameter const,
360 (validate_actionline): Make "line" parameter a pointer to const
362 (encode_actions_1): Make "action_exp" local const, and adjust.
363 (encode_actions): Adjust.
364 (replace_comma): Delete.
365 (trace_dump_actions): Make "action_exp" and "next_comma" locals
366 const, and adjust. Don't frob the action string while splitting
367 it at commas. Instead, make a copy of each split substring in
369 (trace_dump_command): Adjust to validate_actionline prototype
371 * tracepoint.h (decode_agent_options, decode_agent_options)
372 (encode_actions, validate_actionline): Change prototypes.
373 * valprint.h (output_command): Delete declaration.
374 (output_command_const): Declare.
375 * value.c (function_destroyer): Cast const away in xfree call.
377 2013-03-13 Pedro Alves <palves@redhat.com>
379 * ada-lang.c (ada_decode_symbol): Cast away constness of GSYMBOL
380 rather than casting 'const char * const *' to 'const char **'.
381 * ada-lex.l (processInt): Make "trailer" local const. Remove
382 'const char **' cast.
383 * arm-linux-tdep.c (arm_stap_parse_special_token): Add 'char *'
384 locals, and use those as strtol output pointer, instead than doing
385 invalid casts to from 'const char **' to 'char **'.
386 (_initialize_demangle): Remove cast.
387 * i386-tdep.c (i386_stap_parse_special_token): : Add 'char *'
388 locals, and use those as strtol output pointer, instead than doing
389 invalid casts to from 'const char **' to 'char **'.
390 * solib-dsbt.c (dsbt_get_initial_loadmaps): Remove 'gdb_byte**'
392 * stap-probe.c (stap_parse_register_operand)
393 (stap_parse_single_operand): Likewise.
395 2013-03-13 Yao Qi <yao@codesourcery.com>
397 * tracepoint.c (tfile_get_trace_state_variable_value): Look for
398 the last matched 'V' blcok in trace frame.
400 2013-03-12 Joel Brobecker <brobecker@adacore.com>
402 * NEWS: Create a new section for the next release branch.
403 Rename the section of the current branch, now that it has
406 2013-03-12 Joel Brobecker <brobecker@adacore.com>
408 GDB 7.6 branch created (branch timestamp: 2013-03-12 22:15 UTC)
409 * version.in: Bump version to 7.6.50.20130312-cvs.
411 2013-03-12 Keith Seitz <keiths@redhat.com>
413 * mi/mi-cmds.h (mi_execute_command): Make "cmd" const.
414 * mi/mi-interp.c (mi_interpreter_exec): Make "command" const.
415 Remove temporary copy of input string.
416 (mi_execute_command_wrapper): Make "cmd" const.
417 * mi/mi-main.c (mi_execute_command): Make "string_ptr" const.
418 * mi/mi-parse.c (mi_parse_argv): Make "args" const.
420 (mi_parse): Make "cmd" const.
422 * mi/mi-parse.h (mi_parse): Make "cmd" const.
424 2013-03-12 Keith Seitz <keiths@redhat.com>
426 * ada-lang.c (ada_read_renaming_var_value): Pass const
427 pointer to expression string to parse_exp_1.
428 (create_excep_cond_exprs): Likewise.
429 * ax-gdb.c (agent_eval_command_one): Likewise.
430 (maint_agent_printf_command): Likewise.
431 Constify much of the string handling/parsing.
432 * breakpoint.c (set_breakpoint_condition): Pass const
433 pointer to expression string to parse_exp_1.
434 (update_watchpoint): Likewise.
435 (parse_cmd_to_aexpr): Constify string handling.
436 Pass const pointer to parse_exp_1.
437 (init_breakpoint_sal): Pass const pointer to parse_exp_1.
438 (find_condition_and_thread): Likewise.
440 (watch_command_1): Make "arg" const.
441 Constify string handling.
442 Copy the expression string instead of changing the input
444 (update_breakpoint_location): Pass const pointer to
446 * eval.c (parse_and_eval_address): Make "exp" const.
447 (parse_to_comma_and_eval): Make "expp" const.
448 (parse_and_eval): Make "exp" const.
449 * expression.h (parse_expression): Make argument const.
450 (parse_exp_1): Make first argument const.
451 * findcmd.c (parse_find_args): Treat "args" as const.
452 * linespec.c (parse_linespec): Pass const pointer to
453 linespec_expression_to_pc.
454 (linespec_expression_to_pc): Make "exp_ptr" const.
455 * parse.c (parse_exp_1): Make "stringptr" const.
456 Make a copy of the expression to pass to parse_exp_in_context until
457 this whole interface can be constified.
458 (parse_expression): Make "string" const.
459 * printcmd.c (ui_printf): Treat "arg" as const.
460 Handle const strings.
461 * tracepoint.c (validate_actionline): Pass const pointer to
462 all calls to parse_exp_1.
463 (encode_actions_1): Likewise.
464 * value.h (parse_to_comma_and_eval): Make argument const.
465 (parse_and_eval_address): Likewise.
466 (parse_and_eval): Likewise.
467 * varobj.c (varobj_create): Pass const pointer to parse_exp_1.
468 (varobj_set_value): Likewise.
469 * cli/cli-cmds.c (disassemble_command): Treat "arg" as const and
470 constify string handling.
471 Pass const pointers to parse_and_eval_address and
472 parse_to_comman_and_eval.
473 * cli/cli-utils.c (skip_to_space): Rename to ...
474 (skip_to_space_const): ... this. Handle const strings.
475 * cli/cli-utils.h (skip_to_space): Turn into macro which invokes
477 (skip_to_space_const): Declare.
478 * common/format.c (parse_format_string): Make "arg" const.
479 Handle const strings.
480 * common/format.h (parse_format_string): Make "arg" const.
481 * gdbserver/ax.c (ax_printf): Make "format" const.
482 * python/python.c (gdbpy_parse_and_eval): Do not make a copy
483 of the expression string.
485 2013-03-12 Hui Zhu <hui@codesourcery.com>
487 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Update error message.
489 2013-03-12 Yao Qi <yao@codesourcery.com>
490 Hui Zhu <hui@codesourcery.com>
492 * dwarf2loc.c (access_memory): Change nbits to nbytes in gdb_assert.
493 (dwarf2_compile_expr_to_ax): Call access_memory in DW_OP_deref and
496 2013-03-12 Paul Hilfinger <hilfingr@adacore.com>
498 * ada-lex.l (rules): Only recognize 'thread' as a
499 delimiter when followed by numerals, as for c-exp.y.
500 Use new rewind_to_char function to rewind the input for
501 expression-delimiting tokens.
502 (rewind_to_char): New function.
504 2013-03-11 Pedro Alves <palves@redhat.com>
505 Jan Kratochvil <jan.kratochvil@redhat.com>
507 * configure: Regenerate.
508 * configure.ac (check dynamic export flag): Link python test with
511 2013-03-11 Doug Evans <dje@google.com>
512 Keith Seitz <keiths@redhat.com>
514 * linespec.c (find_linespec_symbols): Call find_function_symbols
515 first, and then call lookup_prefix_sym/find_method.
517 2013-03-11 Pedro Alves <palves@redhat.com>
519 * charset.c (convert_between_encodings): Don't cast between
520 different pointer to pointer types. Instead, make the 'inp' local
521 be of the type iconv expects.
522 (wchar_iterate): Don't cast between different pointer to pointer
523 types. Instead, use new pointer local of the type iconv expects.
524 * target.c (target_read_stralloc, target_fileio_read_stralloc):
525 Add new local of type char pointer, and use it to get a
526 char/string view of the byte buffer, instead of casting between
527 pointer to pointer types.
529 2013-03-11 Hafiz Abid Qadeer <abidh@codesourcery.com>
531 * remote.c (remote_set_trace_buffer_size): Move != operator
532 to the start of next line to fix an ARI warning.
534 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
536 * NEWS: Add record changes.
538 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
540 * record-btrace.c (btrace_insn_history): Omit the pc prefix in
541 the instruction history disassembly.
542 * disasm.c (dump_insns): Omit the pc prefix, if requested.
543 * disasm.h (DISASSEMBLY_OMIT_PC): New.
545 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
547 * Makefile.in (SFILES): Add record-btrace.c
548 (COMMON_OBS): Add record-btrace.o
549 * record-btrace.c: New.
550 * objfiles.c: Include btrace.h.
551 (free_objfile): call btrace_free_objfile.
553 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
555 * target.c (target_call_history, target_call_history_from,
556 target_call_history_range): New.
557 * target.h (target_ops) <to_call_history, to_call_history_from,
558 to_call_history_range>: New fields.
559 (target_call_history, target_call_history_from,
560 target_call_history_range): New declaration.
561 * record.c (get_call_history_modifiers, cmd_record_call_history,
562 record_call_history_size): New.
563 (_initialize_record): Add the "record function-call-history" command.
564 Add "set/show record function-call-history-size" commands.
565 * record.h (record_print_flag): New.
567 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
569 * target.h (target_ops) <to_insn_history, to_insn_history_from,
570 to_insn_history_range>: New fields.
571 (target_insn_history): New.
572 (target_insn_history_from): New.
573 (target_insn_history_range): New.
574 * target.c (target_insn_history): New.
575 (target_insn_history_from): New.
576 (target_insn_history_range): New.
577 * record.c: Include cli/cli-utils.h, disasm.h, ctype.h.
578 (record_insn_history_size): New.
579 (get_insn_number): New.
580 (get_context_size): New.
582 (get_insn_history_modifiers): New.
583 (cmd_record_insn_history): New.
584 (_initialize_record): Add "set/show record instruction-history-size"
585 command. Add "record instruction-history" command.
587 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
589 * record.h (record_disconnect): New.
590 (record_detach): New.
591 (record_mourn_inferior): New.
593 * record-full.c (record_disconnect, record_detach,
594 record_mourn_inferior, record_kill): Move to...
598 (record_unpush): New.
599 (cmd_record_stop): Call record_stop. Replace unpush_target
600 call with record_unpush call.
601 (record_disconnect, record_detach): Assert that the target
602 is of record stratum. Call record_unpush, record_stop, and
604 (record_mourn_inferior, record_kill): Assert that the target
605 is of record stratum. Call record_unpush and DEBUG.
607 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
609 * record-full.h, record-full.c (record_memory_query): Rename
611 (record_full_memory_query): ...this. Update all users.
612 (record_arch_list_add_reg): Rename to ...
613 (record_full_arch_list_add_reg): ...this. Update all users.
614 (record_arch_list_add_mem): Rename to ...
615 (record_full_arch_list_add_mem): ...this. Update all users.
616 (record_arch_list_add_end): Rename to ...
617 (record_full_arch_list_add_end): ...this. Update all users.
618 (record_gdb_operation_disable_set): Rename to ...
619 (record_full_gdb_operation_disable_set): ...this.
622 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
624 * record-full.c (DEFAULT_RECORD_INSN_MAX_NUM): Renamed to ...
625 (DEFAULT_RECORD_FULL_INSN_MAX_NUM): ... this. Updated all users.
626 (RECORD_IS_REPLAY): Renamed to ...
627 (RECORD_FULL_IS_REPLAY): ... this. Updated all users.
628 (RECORD_FILE_MAGIC): Renamed to ...
629 (RECORD_FULL_FILE_MAGIC): ... this. Updated all users.
630 (record_mem_entry): Renamed to ...
631 (record_full_mem_entry): ... this. Updated all users.
632 (record_reg_entry): Renamed to ...
633 (record_full_reg_entry): ... this. Updated all users.
634 (record_end_entry): Renamed to ...
635 (record_full_end_entry): ... this. Updated all users.
636 (record_type) <record_end, record_reg, record_mem>: Renamed
638 (record_full_type) <record_full_end, record_full_reg,
639 record_full_mem>: ... this. Updated all users.
640 (record_entry): Renamed to ...
641 (record_full_entry): ... this. Updated all users.
642 (record_core_buf_entry): Renamed to ...
643 (record_full_core_buf_entry): ... this. Updated all users.
644 (record_core_regbuf): Renamed to ...
645 (record_full_core_regbuf): ... this. Updated all users.
646 (record_core_start): Renamed to ...
647 (record_full_core_start): ... this. Updated all users.
648 (record_core_end): Renamed to ...
649 (record_full_core_end): ... this. Updated all users.
650 (record_core_buf_list): Renamed to ...
651 (record_full_core_buf_list): ... this. Updated all users.
652 (record_first): Renamed to ...
653 (record_full_first): ... this. Updated all users.
654 (record_list): Renamed to ...
655 (record_full_list): ... this. Updated all users.
656 (record_arch_list_head): Renamed to ...
657 (record_full_arch_list_head): ... this. Updated all users.
658 (record_arch_list_tail): Renamed to ...
659 (record_full_arch_list_tail): ... this. Updated all users.
660 (record_stop_at_limit): Renamed to ...
661 (record_full_stop_at_limit): ... this. Updated all users.
662 (record_insn_max_num): Renamed to ...
663 (record_full_insn_max_num): ... this. Updated all users.
664 (record_insn_num): Renamed to ...
665 (record_full_insn_num): ... this. Updated all users.
666 (record_insn_count): Renamed to ...
667 (record_full_insn_count): ... this. Updated all users.
668 (record_ops): Renamed to ...
669 (record_full_ops): ... this. Updated all users.
670 (record_core_ops): Renamed to ...
671 (record_full_core_ops): ... this. Updated all users.
672 (set_record_cmdlist): Renamed to ...
673 (set_record_full_cmdlist): ... this. Updated all users.
674 (show_record_cmdlist): Renamed to ...
675 (show_record_full_cmdlist): ... this. Updated all users.
676 (record_cmdlist): Renamed to ...
677 (record_full_cmdlist): ... this. Updated all users.
678 (record_beneath_to_resume_ops): Renamed to ...
679 (record_full_beneath_to_resume_ops): ... this. Updated all users.
680 (record_beneath_to_resume): Renamed to ...
681 (record_full_beneath_to_resume): ... this. Updated all users.
682 (record_beneath_to_wait_ops): Renamed to ...
683 (record_full_beneath_to_wait_ops): ... this. Updated all users.
684 (record_beneath_to_wait): Renamed to ...
685 (record_full_beneath_to_wait): ... this. Updated all users.
686 (record_beneath_to_store_registers_ops): Renamed to ...
687 (record_full_beneath_to_store_registers_ops): ... this.
689 (record_beneath_to_store_registers): Renamed to ...
690 (record_full_beneath_to_store_registers): ... this.
692 (record_beneath_to_xfer_partial_ops): Renamed to ...
693 (record_full_beneath_to_xfer_partial_ops): ... this.
695 (record_beneath_to_xfer_partial): Renamed to ...
696 (record_full_beneath_to_xfer_partial): ... this.
698 (record_beneath_to_insert_breakpoint): Renamed to ...
699 (record_full_beneath_to_insert_breakpoint): ... this.
701 (record_beneath_to_stopped_by_watchpoint): Renamed to ...
702 (record_full_beneath_to_stopped_by_watchpoint): ... this.
704 (record_beneath_to_stopped_data_address): Renamed to ...
705 (record_full_beneath_to_stopped_data_address): ... this.
707 (record_beneath_to_async): Renamed to ...
708 (record_full_beneath_to_async): ... this. Updated all users.
709 (record_goto_insn): Renamed to ...
710 (record_full_goto_insn): ... this. Updated all users.
711 (record_save): Renamed to ...
712 (record_full_save): ... this. Updated all users.
713 (record_reg_alloc): Renamed to ...
714 (record_full_reg_alloc): ... this. Updated all users.
715 (record_reg_release): Renamed to ...
716 (record_full_reg_release): ... this. Updated all users.
717 (record_mem_alloc): Renamed to ...
718 (record_full_mem_alloc): ... this. Updated all users.
719 (record_mem_release): Renamed to ...
720 (record_full_mem_release): ... this. Updated all users.
721 (record_end_alloc): Renamed to ...
722 (record_full_end_alloc): ... this. Updated all users.
723 (record_end_release): Renamed to ...
724 (record_full_end_release): ... this. Updated all users.
725 (record_entry_release): Renamed to ...
726 (record_full_entry_release): ... this. Updated all users.
727 (record_list_release): Renamed to ...
728 (record_full_list_release): ... this. Updated all users.
729 (record_list_release_following): Renamed to ...
730 (record_full_list_release_following): ... this.
732 (record_list_release_first): Renamed to ...
733 (record_full_list_release_first): ... this. Updated all users.
734 (record_arch_list_add): Renamed to ...
735 (record_full_arch_list_add): ... this. Updated all users.
736 (record_get_loc): Renamed to ...
737 (record_full_get_loc): ... this. Updated all users.
738 (record_check_insn_num): Renamed to ...
739 (record_full_check_insn_num): ... this. Updated all users.
740 (record_arch_list_cleanups): Renamed to ...
741 (record_full_arch_list_cleanups): ... this. Updated all users.
742 (record_message): Renamed to ...
743 (record_full_message): ... this. Updated all users.
744 (record_message_wrapper): Renamed to ...
745 (record_full_message_wrapper): ... this. Updated all users.
746 (record_message_wrapper_safe): Renamed to ...
747 (record_full_message_wrapper_safe): ... this. Updated all users.
748 (record_gdb_operation_disable): Renamed to ...
749 (record_full_gdb_operation_disable): ... this. Updated all users.
750 (record_hw_watchpoint): Renamed to ...
751 (record_full_hw_watchpoint): ... this. Updated all users.
752 (record_exec_insn): Renamed to ...
753 (record_full_exec_insn): ... this. Updated all users.
754 (record_restore): Renamed to ...
755 (record_full_restore): ... this. Updated all users.
756 (record_async_inferior_event_token): Renamed to ...
757 (record_full_async_inferior_event_token): ... this.
759 (record_async_inferior_event_handler): Renamed to ...
760 (record_full_async_inferior_event_handler): ... this.
762 (record_core_open_1): Renamed to ...
763 (record_full_core_open_1): ... this. Updated all users.
764 (record_open_1): Renamed to ...
765 (record_full_open_1): ... this. Updated all users.
766 (record_open): Renamed to ...
767 (record_full_open): ... this. Updated all users.
768 (record_close): Renamed to ...
769 (record_full_close): ... this. Updated all users.
770 (record_resume_step): Renamed to ...
771 (record_full_resume_step): ... this. Updated all users.
772 (record_resumed): Renamed to ...
773 (record_full_resumed): ... this. Updated all users.
774 (record_execution_dir): Renamed to ...
775 (record_full_execution_dir): ... this. Updated all users.
776 (record_resume): Renamed to ...
777 (record_full_resume): ... this. Updated all users.
778 (record_get_sig): Renamed to ...
779 (record_full_get_sig): ... this. Updated all users.
780 (record_sig_handler): Renamed to ...
781 (record_full_sig_handler): ... this. Updated all users.
782 (record_wait_cleanups): Renamed to ...
783 (record_full_wait_cleanups): ... this. Updated all users.
784 (record_wait_1): Renamed to ...
785 (record_full_wait_1): ... this. Updated all users.
786 (record_wait): Renamed to ...
787 (record_full_wait): ... this. Updated all users.
788 (record_stopped_by_watchpoint): Renamed to ...
789 (record_full_stopped_by_watchpoint): ... this. Updated all users.
790 (record_disconnect): Renamed to ...
791 (record_full_disconnect): ... this. Updated all users.
792 (record_detach): Renamed to ...
793 (record_full_detach): ... this. Updated all users.
794 (record_mourn_inferior): Renamed to ...
795 (record_full_mourn_inferior): ... this. Updated all users.
796 (record_kill): Renamed to ...
797 (record_full_kill): ... this. Updated all users.
798 (record_stopped_data_address): Renamed to ...
799 (record_full_stopped_data_address): ... this. Updated all users.
800 (record_registers_change): Renamed to ...
801 (record_full_registers_change): ... this. Updated all users.
802 (record_store_registers): Renamed to ...
803 (record_full_store_registers): ... this. Updated all users.
804 (record_xfer_partial): Renamed to ...
805 (record_full_xfer_partial): ... this. Updated all users.
806 (record_breakpoint): Renamed to ...
807 (record_full_breakpoint): ... this. Updated all users.
808 (record_breakpoint_p): Renamed to ...
809 (record_full_breakpoint_p): ... this. Updated all users.
810 (record_breakpoints): Renamed to ...
811 (record_full_breakpoints): ... this. Updated all users.
812 (record_sync_record_breakpoints): Renamed to ...
813 (record_full_sync_record_breakpoints): ... this.
815 (record_init_record_breakpoints): Renamed to ...
816 (record_full_init_record_breakpoints): ... this.
818 (record_insert_breakpoint): Renamed to ...
819 (record_full_insert_breakpoint): ... this. Updated all users.
820 (record_remove_breakpoint): Renamed to ...
821 (record_full_remove_breakpoint): ... this. Updated all users.
822 (record_can_execute_reverse): Renamed to ...
823 (record_full_can_execute_reverse): ... this. Updated all users.
824 (record_get_bookmark): Renamed to ...
825 (record_full_get_bookmark): ... this. Updated all users.
826 (record_goto_bookmark): Renamed to ...
827 (record_full_goto_bookmark): ... this. Updated all users.
828 (record_async): Renamed to ...
829 (record_full_async): ... this. Updated all users.
830 (record_can_async_p): Renamed to ...
831 (record_full_can_async_p): ... this. Updated all users.
832 (record_is_async_p): Renamed to ...
833 (record_full_is_async_p): ... this. Updated all users.
834 (record_execution_direction): Renamed to ...
835 (record_full_execution_direction): ... this. Updated all users.
836 (record_info): Renamed to ...
837 (record_full_info): ... this. Updated all users.
838 (record_delete): Renamed to ...
839 (record_full_delete): ... this. Updated all users.
840 (record_is_replaying): Renamed to ...
841 (record_full_is_replaying): ... this. Updated all users.
842 (record_goto_entry): Renamed to ...
843 (record_full_goto_entry): ... this. Updated all users.
844 (record_goto_begin): Renamed to ...
845 (record_full_goto_begin): ... this. Updated all users.
846 (record_goto_end): Renamed to ...
847 (record_full_goto_end): ... this. Updated all users.
848 (record_goto): Renamed to ...
849 (record_full_goto): ... this. Updated all users.
850 (init_record_ops): Renamed to ...
851 (init_record_full_ops): ... this. Updated all users.
852 (record_core_resume): Renamed to ...
853 (record_full_core_resume): ... this. Updated all users.
854 (record_core_kill): Renamed to ...
855 (record_full_core_kill): ... this. Updated all users.
856 (record_core_fetch_registers): Renamed to ...
857 (record_full_core_fetch_registers): ... this. Updated all users.
858 (record_core_prepare_to_store): Renamed to ...
859 (record_full_core_prepare_to_store): ... this. Updated all users.
860 (record_core_store_registers): Renamed to ...
861 (record_full_core_store_registers): ... this. Updated all users.
862 (record_core_xfer_partial): Renamed to ...
863 (record_full_core_xfer_partial): ... this. Updated all users.
864 (record_core_insert_breakpoint): Renamed to ...
865 (record_full_core_insert_breakpoint): ... this. Updated all users.
866 (record_core_remove_breakpoint): Renamed to ...
867 (record_full_core_remove_breakpoint): ... this. Updated all users.
868 (record_core_has_execution): Renamed to ...
869 (record_full_core_has_execution): ... this. Updated all users.
870 (init_record_core_ops): Renamed to ...
871 (init_record_full_core_ops): ... this. Updated all users.
872 (cmd_record_restore): Renamed to ...
873 (cmd_record_full_restore): ... this. Updated all users.
874 (record_save_cleanups): Renamed to ...
875 (record_full_save_cleanups): ... this. Updated all users.
876 (cmd_record_start): Renamed to ...
877 (cmd_record_full_start): ... this. Updated all users.
878 (set_record_insn_max_num): Renamed to ...
879 (set_record_full_insn_max_num): ... this. Updated all users.
880 (set_record_command): Renamed to ...
881 (set_record_full_command): ... this. Updated all users.
882 (show_record_command): Renamed to ...
883 (show_record_full_command): ... this. Updated all users.
884 (_initialize_record): Renamed to ...
885 (_initialize_record_full): ... this. Updated all users.
887 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
889 * record.h: Split into this and ...
890 * record-full.h: ... this.
891 * record.c: Split into this and ...
892 * record-full.c: ... this.
893 * target.h (target_ops): Add new fields to_info_record,
894 to_save_record, to_delete_record, to_record_is_replaying,
895 to_goto_record_begin, to_goto_record_end, to_goto_record.
896 (target_info_record): New.
897 (target_save_record): New.
898 (target_supports_delete_record): New.
899 (target_delete_record): New.
900 (target_record_is_replaying): New.
901 (target_goto_record_begin): New.
902 (target_goto_record_end): New.
903 (target_goto_record): New.
904 * target.c (target_info_record): New.
905 (target_save_record): New.
906 (target_supports_delete_record): New.
907 (target_delete_record): New.
908 (target_record_is_replaying): New.
909 (target_goto_record_begin): New.
910 (target_goto_record_end): New.
911 (target_goto_record): New.
912 * record.h: Declare struct cmd_list_element.
913 (record_cmdlist): New declaration.
914 (set_record_cmdlist): New declaration.
915 (show_record_cmdlist): New declaration.
916 (info_record_cmdlist): New declaration.
917 (cmd_record_goto): New declaration.
918 * record.c: Remove unnecessary includes.
920 (cmd_record_goto): Remove declaration.
921 (record_cmdlist): Now extern. Initialize.
922 (set_record_cmdlist): Now extern. Initialize.
923 (show_record_cmdlist): Now extern. Initialize.
924 (info_record_cmdlist): Now extern. Initialize.
925 (find_record_target): New.
926 (require_record_target): New.
927 (cmd_record_start): Update.
928 (cmd_record_delete): Remove target-specific code.
929 Call target_delete_record.
930 (cmd_record_stop): Unpush any record target.
931 (set_record_insn_max_num): Move to record-full.c
932 (set_record_command): Add comment.
933 (show_record_command): Add comment.
934 (info_record_command): Update comment.
935 Remove target-specific code.
936 Call the record target's to_info_record.
937 (cmd_record_start): New.
938 (cmd_record_goto): Now extern.
939 Remove target-specific code.
940 Call target_goto_begin, target_goto_end, or target_goto.
941 (_initialize_record): Move record target ops initialization to
943 Change "record" command help text.
944 Move "record restore", "record set", and "record show" commands to
946 * Makefile.in (SFILES): Add record-full.c.
947 (HFILES_NO_SRCDIR): Add record-full.h.
948 (COMMON_OBS): Add record-full.o.
949 * amd64-linux-tdep.c: Include record-full.h instead of record.h.
950 * arm-tdep.c: Include record-full.h.
951 * i386-linux-tdep.c: Include record-full.h instead of record.h.
952 * i386-tdep.c: Include record-full.h.
953 * infrun.c: Include record-full.h.
954 * linux-record.c: Include record-full.h.
955 * moxie-tdep.c: Include record-full.h.
956 * record-full.c: Include record-full.h.
957 Change module comment.
958 (set_record_full_cmdlist): New.
959 (show_record_full_cmdlist): New.
960 (record_full_cmdlist): New.
961 (record_goto_insn): New declaration.
962 (record_save): New declaration.
963 (record_check_insn_num): Change query string.
965 (record_delete): New.
966 (record_is_replaying): New.
967 (record_goto_entry): New.
968 (record_goto_begin): New.
969 (record_goto_end): New.
971 (init_record_ops): Update.
972 (init_record_core_ops): Update.
973 (cmd_record_save): Rename to record_save. Remove target and arg checks.
974 (cmd_record_start): New.
975 (set_record_insn_max_num): Moved from record.c
976 (set_record_full_command): New.
977 (show_record_full_command): New.
978 (_initialize_record_full): New.
980 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
982 * target.h (add_deprecated_target_alias): New.
983 * target.c (add_deprecated_target_alias): New.
985 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
987 * common/linux-btrace.c: Include sys/ptrace, sys/types, sys/wait.h,
989 (linux_supports_btrace): Add kernel and
991 (kernel_supports_btrace): New function.
992 (cpu_supports_btrace): New function.
993 (intel_supports_btrace): New function.
995 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
997 * target.h (enum target_object): Add TARGET_OBJECT_BTRACE.
998 * remote.c: Include btrace.h.
999 (struct btrace_target_info): New struct.
1000 (remote_supports_btrace): New function.
1001 (send_Qbtrace): New function.
1002 (remote_enable_btrace): New function.
1003 (remote_disable_btrace): New function.
1004 (remote_teardown_btrace): New function.
1005 (remote_read_btrace): New function.
1006 (init_remote_ops): Add btrace ops.
1007 (enum <unnamed>): Add btrace packets.
1008 (struct protocol_feature remote_protocol_features[]): Add btrace packets.
1009 (_initialize_remote): Add packet configuration for branch tracing.
1011 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1013 * features/btrace.dtd: New file.
1014 * Makefile.in (XMLFILES): Add btrace.dtd.
1015 * btrace.h (parse_xml_btrace): New declaration.
1016 * btrace.c: Include xml-support.h.
1017 (parse_xml_btrace): New function.
1018 (parse_xml_btrace_block): New function.
1019 (block_attributes): New struct.
1020 (btrace_attributes): New struct.
1021 (btrace_children): New struct.
1022 (btrace_elements): New struct.
1024 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1026 * amd64-linux-nat.c: Include btrace.h and linux-btrace.h.
1027 (amd64_linux_enable_btrace): New.
1028 (amd64_linux_disable_btrace): New.
1029 (amd64_linux_teardown_btrace): New.
1030 (_initialize_amd64_linux_nat): Initialize btrace ops.
1031 * i386-linux.nat.c: Include btrace.h and linux-btrace.h.
1032 (i386_linux_enable_btrace): New.
1033 (i386_linux_disable_btrace): New.
1034 (i386_linux_teardown_btrace): New.
1035 (_initialize_i386_linux_nat): Initialize btrace ops.
1036 * config/i386/linux.mh: Add linux-btrace.o.
1037 * config/i386/linux64.mh: Add linux-btrace.o.
1039 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1041 * common/linux_btrace.h: New file.
1042 * common/linux_btrace.c: New file.
1043 * Makefile.in (SFILES): Add btrace.c.
1044 (HFILES_NO_SRCDIR): Add common/linux-btrace.h.
1045 (COMMON_OBS): Add btrace.o.
1046 (linux-btrace.o): New rule.
1048 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1050 * target.h: Include btrace.h.
1051 (struct target_ops) <to_supports_btrace, to_enable_btrace,
1052 to_disable_btrace, to_teardown_btrace, to_read_btrace>: New.
1053 * target.c (target_supports_btrace): New function.
1054 (target_enable_btrace): New function.
1055 (target_disable_btrace): New function.
1056 (target_teardown_btrace): New function.
1057 (target_read_btrace): New function.
1058 * btrace.h: New file.
1059 * btrace.c: New file.
1060 * Makefile.in: Add btrace.c.
1061 * gdbthread.h: Include btrace.h.
1062 (struct thread_info): Add btrace field.
1063 * thread.c: Include btrace.h.
1064 (clear_thread_inferior_resources): Call target_teardown_btrace.
1065 * common/btrace-common.h: New file.
1067 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1069 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Call also kill
1070 for CHILD, ignore PTRACE_KILL errors, move the inner block variable
1071 kill_status to outer block.
1073 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1075 Fix entry-values if the callee called a noreturn function.
1076 * dwarf2-frame-tailcall.c (dwarf2_tailcall_sniffer_first): Use
1077 get_frame_address_in_block. Add new comment.
1079 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1081 Fix entry-values in C++ across CUs.
1082 * dwarf2loc.c (call_site_to_target_addr) <FIELD_LOC_KIND_PHYSNAME>: Use
1083 lookup_minimal_symbol. Add a comment.
1085 (read_call_site_scope) <is_ref_attr> <die_is_declaration>: Prefer
1088 2013-03-08 Yao Qi <yao@codesourcery.com>
1090 * tracepoint.c (_initialize_tracepoint): Indent the code.
1092 2013-03-08 Pedro Alves <palves@redhat.com>
1094 * findcmd.c (put_bits): Change type of parameter to 'gdb_byte *'.
1095 (parse_find_args, find_command): Change type of pattern buffer
1096 locals to 'gdb_byte *'.
1098 2013-03-08 Stan Shebs <stan@codesourcery.com>
1099 Hafiz Abid Qadeer <abidh@codesourcery.com>
1101 * NEWS: Mention set and show trace-buffer-size commands.
1103 * target.h (struct target_ops): New method
1104 to_set_trace_buffer_size.
1105 (target_set_trace_buffer_size): New macro.
1106 * target.c (update_current_target): Set up new method.
1107 * tracepoint.c (trace_buffer_size): New global.
1108 (start_tracing): Send it to the target.
1109 (set_trace_buffer_size): New function.
1110 (_initialize_tracepoint): Add new setshow for trace-buffer-size.
1111 * remote.c (remote_set_trace_buffer_size): New function.
1112 (_initialize_remote): Use it.
1113 (QTBuffer:size) New remote command.
1114 (PACKET_QTBuffer_size): New enum.
1115 (remote_protocol_features): Add an entry for
1116 PACKET_QTBuffer_size.
1118 2013-03-08 Tom Tromey <tromey@redhat.com>
1120 * remote-m32r-sdi.c (m32r_load): Call skip_spaces on correct
1123 2013-03-07 Pedro Alves <palves@redhat.com>
1125 * target.c (target_read_stralloc, target_fileio_read_alloc):
1126 *Cast pointer to 'gdb_byte *' in target call.
1128 2013-03-07 Pedro Alves <palves@redhat.com>
1130 * corefile.c (read_memory_string): Cast pointer to gdb_byte* in
1133 2013-03-07 Keith Seitz <keiths@redhat.com>
1135 * breakpoint.c (catch_syscall_split_args): Use skip_spaces.
1136 (trace_pass_command): Likewise.
1137 * cli/cli-cmds.c: Include cli/cli-utils.h.
1138 (source_command): Use skip-spaces.
1139 (disassemble_command): Likewise.
1140 * findcmd.c: Include cli/cli-utils.h.
1141 (parse_find_args): Use skip_spaces.
1142 * go32-nat.c: Include cli/cli-utils.h.
1143 (go32_sldt): Use skip_spaces.
1144 (go32_sgdt): Likewise.
1145 (go32_sidt): Likewise.
1146 (go32_pde): Likewise.
1147 (go32_pte): Likewise.
1148 (go32_pte_for_address): Likewise.
1149 * infcmd.c: Include cli/cli-utils.h.
1150 (registers_info): Use skip_spaces.
1151 * linux-tdep.c (read_mapping): Use skip_spaces_const.
1152 (linux_info_proc): Likewise.
1153 * linux-thread-db.c: Include cli/cli-utils.h.
1154 (info_auto_load_libthread_db): Use skip_spaces_const.
1155 * m32r-rom.c: Include cli/cli-utils.h.
1156 (m32r_upload_command): Use skip_spaces.
1157 * maint.c: Include cli/cli-utils.h.
1158 (maintenance_translate_address): Use skip_spaces.
1159 * mi/mi-parse.c: Include cli/cli-utils.h.
1160 (mi_parse_argv): Use skip_spaces.
1161 (mi_parse): Likewise.
1162 * minsyms.c: Include cli/cli-utils.h.
1163 (msymbol_hash_iw): Use skip_spaces_const.
1164 * objc-lang.c: Include cli/cli-utils.h.
1165 (parse_selector): Use skip_spaces.
1166 (parse_method): Likewise.
1167 * python/python.c: Include cli/cli-utils.h.
1168 (python_interactive_command)[HAVE_PYTHON]: Use skip_spaces.
1169 (python_command)[HAVE_PYTHON]: Likewise.
1170 (python_interactive_command)[!HAVE_PYTHON]: Likewise.
1171 * remote-m32r-sdi.c: Include cli/cli-utils.h.
1172 (m32r_load): Use skip_spaces.
1173 * serial.c: Include cli/cli-utils.h.
1174 (serial_open): Use skip_spaces_const.
1175 * stack.c: Include cli/cli-utils.h.
1176 (parse_frame_specification_1): Use skip_spaces_const.
1177 * symfile.c: Include cli/cli-utils.h.
1178 (set_ext_lang_command): Use skip_spaces.
1179 * symtab.c: Include cli/cli-utils.h.
1180 (rbreak_command): Use skip_spaces.
1181 * thread.c (thread_name_command): Use skip_spaces.
1182 * tracepoint.c (validate_actionline): Use skip_spaces.
1183 (encode_actions_1): Likewise.
1184 (trace_find_range_command): Likewise.
1185 (trace_find_outside_command): Likewise.
1186 (trace_dump_actions): Likewise.
1188 2013-03-07 Pedro Alves <palves@redhat.com>
1190 * c-lang.c (parse_one_string): Cast argument to gdb_byte *.
1191 * expprint.c (print_subexp_standard): Likewise.
1192 * utils.c (host_char_to_target): Likewise.
1193 * valprint.c (generic_emit_char, generic_printstr): Likewise.
1194 * varobj.c (value_get_print_value): Change type of local to char*.
1195 Cast it gdb_byte * in call to language printer.
1197 2013-03-07 Pedro Alves <palves@redhat.com>
1199 * charset.c (struct wchar_iterator) <input>: Change type to 'const
1201 (make_wchar_iterator): Remove cast to char*.
1202 (wchar_iterate): Change type of local.
1204 2013-03-07 Pedro Alves <palves@redhat.com>
1206 * regcache.c (regcache_xmalloc_1): Call XCALLOC with signed char
1207 for 'regcache->register_status'.
1209 2013-03-07 Pedro Alves <palves@redhat.com>
1211 * breakpoint.c (breakpoint_xfer_memory): Change type of local to
1214 2013-03-07 Pedro Alves <palves@redhat.com>
1216 * stap-probe.c (handle_stap_probe): Add cast to char*.
1218 2013-03-07 Pedro Alves <palves@redhat.com>
1220 * linux-record.c (record_linux_system_call) <gdb_sys_msgrcv,
1221 RECORD_MSGRCV>: Pass a signed variable to
1222 regcache_raw_read_signed, instead of an unsigned one.
1224 2013-03-07 Pedro Alves <palves@redhat.com>
1226 * remote-notif.c (notif_debug): Change type to int.
1227 * remote-notif.h (notif_debug): Likewise.
1229 2013-03-07 Pedro Alves <palves@redhat.com>
1231 * ser-tcp.c (tcp_retry_limit): Change type to unsigned int.
1233 2013-03-07 Pedro Alves <palves@redhat.com>
1235 * remote.c (hex2bin, bin2hex): Move extern declarations to ...
1236 * remote.h (hex2bin, bin2hex): ... here.
1237 * tracepoint.c (hex2bin, bin2hex): Remove extern declarations.
1239 2013-03-07 Eli Zaretskii <eliz@gnu.org>
1241 * utils.c (initialize_utils): Improve doc strings of "set/show
1242 width", "set/show height", and "set/show pagination".
1244 2013-03-06 Keith Seitz <keiths@redhat.com>
1246 * ax-gdb.c (gen_printf): Make FORMAT const.
1247 * ax-gdb.h (gen_printf): Likewise.
1248 * ax-general.c (ax_string): Make STR const.
1249 * ax.h (ax_string): Likewise.
1251 2013-03-06 Doug Evans <dje@google.com>
1253 * elfread.c (elf_symfile_read): Move debugging printf to more
1256 2013-03-06 Pedro Alves <palves@redhat.com>
1258 * python/py-utils.c (target_string_to_unicode): Delete function.
1259 * python/python-internal.h (target_string_to_unicode): Delete
1262 2013-03-06 Pierre Muller <muller@sourceware.org>
1264 * linespec.c (get_current_search_block): ARI fix, use (void)
1265 for empty parameter list.
1267 2013-03-05 Doug Evans <dje@google.com>
1269 * ada-lang.c (ada_lookup_symbol_list_worker): New function, contents
1270 of old ada_lookup_symbol_list. In !full_search case, don't
1272 (ada_lookup_symbol_list): Delete arg full_search, all callers
1273 updated. Call ada_lookup_symbol_list_worker.
1274 (ada_iterate_over_symbols): Call ada_lookup_symbol_list_worker.
1275 * ada-lang.h (ada_lookup_symbol_list): Update.
1276 * language.h (language_defn): Update comment for
1277 la_iterate_over_symbols.
1278 * linespec.c (iterate_over_file_blocks): New function.
1279 (iterate_over_all_matching_symtabs): Call it.
1280 (lookup_prefix_sym): Ditto.
1281 (get_current_search_block): New function.
1282 (get_search_block): Delete.
1283 (find_label_symbols): Call get_current_search_block.
1284 (add_matching_symbols_to_info): Call iterate_over_file_blocks.
1285 * symtab.c (iterate_over_symbols): Don't search superblocks.
1287 2013-03-05 Yao Qi <yao@codesourcery.com>
1289 * cli/cli-decode.c (add_setshow_zuinteger_unlimited_cmd): Change
1290 parameter VAR's type from "unsigned int" to "int".
1291 * command.h (var_zuinteger_unlimited): Update its comments.
1292 (add_setshow_zuinteger_unlimited_cmd): Update the declaration.
1294 2013-03-05 Corinna Vinschen <vinschen@redhat.de>
1296 * NEWS: Mention new target x86_64-*-cygwin*.
1298 2013-03-05 Corinna Vinschen <vinschen@redhat.de>
1300 * configure.host: Add x86_64-*-cygwin* as host.
1301 * configure.tgt: Add x86_64-*-cygwin* as target.
1302 * config/i386/cygwin64.mh: New file.
1304 2013-03-04 Jan Kratochvil <jan.kratochvil@redhat.com>
1306 * linespec.c (decode_line_2): Fix duplicate request off by two message.
1308 2013-03-04 Jan Kratochvil <jan.kratochvil@redhat.com>
1310 * linespec.c (struct linespec_canonical_name): New.
1311 (struct linespec_state): Change canonical_names type to it.
1312 (add_sal_to_sals): Change variable canonical_name to canonical. Change
1313 xrealloc element size. Initialize the different CANONICAL fields.
1314 (canonical_to_fullform): New.
1315 (filter_results): Use it. Add variables canonical, fullform and
1317 (struct decode_line_2_item, decode_line_2_compare_items): New.
1318 (decode_line_2): Remove variables iter and item_names, add variables
1319 items and items_count. Modify the code for these new variables.
1321 2013-03-04 Corinna Vinschen <vinschen@redhat.com>
1323 * coff-pe-read.c (read_pe_exported_syms): Don't return without
1326 2013-03-04 Luis Machado <lgustavo@codesourcery.com>
1328 * tracepoint.c (build_traceframe_info): Add code for byte order.
1330 2013-03-02 Kevin Buettner <kevinb@redhat.com>
1332 * v850-tdep.c: (v850e2_register_name): Revise system register
1333 names to match current V850E2M architecture specifications.
1334 Update register number enum comments too.
1336 2013-03-01 Jiong Wang <jiwang@tilera.com>
1337 Pedro Alves <palves@redhat.com>
1339 * tilegx-tdep.c (tilegx_analyze_prologue): Limit bundle reading
1341 (tilegx_skip_prologue): Limit prologue analysis to section end.
1343 2013-03-01 Jan Kratochvil <jan.kratochvil@redhat.com>
1345 * dwarf2loc.c (call_site_find_chain_1): New variable save_callee_pc,
1348 2013-03-01 Pedro Alves <palves@redhat.com>
1350 Use gdb_byte for bytes from the program being debugged.
1352 * arm-tdep.c (arm_store_return_value, arm_get_longjmp_target):
1353 Change type of local 'buf' to gdb_byte.
1354 * avr-tdep.c (avr_frame_prev_register, avr_push_dummy_call): Likewise.
1355 * bfin-tdep.c (bfin_push_dummy_call): Likewise.
1356 * cris-tdep.c (cris_sigcontext_addr)
1357 (cris_sigtramp_frame_unwind_cache): Likewise.
1358 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp)
1359 (frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
1361 * frv-tdep.c (frv_pseudo_register_write, frv_analyze_prologue): Likewise.
1362 * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer)
1363 (hppa32_hpux_search_dummy_call_sequence)
1364 (hppa_hpux_supply_save_state): Likewise.
1365 * hppa-linux-tdep.c (insns_match_pattern)
1366 (hppa_linux_find_global_pointer): Likewise.
1367 * hppa-tdep.c (hppa_in_function_epilogue_p)
1368 (skip_prologue_hard_way, hppa_frame_cache): Likewise.
1369 * i386-nto-tdep.c (i386nto_sigcontext_addr): Likewise.
1370 * i386fbsd-tdep.c (i386fbsd_supply_uthread)
1371 (i386fbsd_collect_uthread): Likewise.
1372 * ia64-hpux-tdep.c (ia64_hpux_push_dummy_code): Likewise.
1373 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Likewise.
1374 * ia64-tdep.c (examine_prologue, ia64_frame_cache)
1375 (ia64_frame_prev_register, ia64_sigtramp_frame_cache)
1376 (ia64_sigtramp_frame_prev_register, ia64_access_reg)
1377 (ia64_access_rse_reg, ia64_libunwind_frame_this_id)
1378 (ia64_libunwind_frame_prev_register)
1379 (ia64_libunwind_sigtramp_frame_this_id)
1380 (ia64_find_global_pointer_from_dynamic_section)
1381 (find_extant_func_descr, find_func_descr, ia64_dummy_id)
1382 (ia64_unwind_pc): Likewise.
1383 * iq2000-tdep.c (iq2000_store_return_value): Likewise.
1384 * m68hc11-tdep.c (m68hc11_push_dummy_call)
1385 (m68hc11_extract_return_value): Likewise.
1386 * m68klinux-nat.c (fetch_register, store_register): Likewise.
1387 * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_cr32_write)
1388 (mep_get_insn, mep_push_dummy_call): Likewise.
1389 * mips-linux-tdep.c (mips_linux_get_longjmp_target)
1390 (mips_linux_in_dynsym_stub): Likewise.
1391 * mn10300-tdep.c (mep_pseudo_cr32_write): Likewise.
1392 * ppc-linux-nat.c (fetch_register, store_register): Likewise.
1393 * regcache.c (dump_endian_bytes): Change type of parameter 'buf'
1395 * remote-mips.c (mips_set_register): Likewise.
1396 * remote-sim.c (gdbsim_fetch_register): Likewise.
1397 * score-tdep.c (score7_fetch_inst): Change type of parameter
1398 'memblock' and local 'buf' to gdb_byte.
1399 (score7_malloc_and_get_memblock): Change return type to gdb_byte.
1400 Change type of local 'buf' to gdb_byte. Adjust.
1401 (score7_adjust_memblock_ptr): Change type of parameter 'memblock'
1403 (score7_analyze_prologue): Change type of 'memblock' and
1404 'memblock_ptr' locals to gdb_byte*.
1405 * sh64-tdep.c (sh64_extract_return_value)
1406 (sh64_store_return_value): Change type of local 'buf' to gdb_byte.
1407 * solib-darwin.c (darwin_current_sos, darwin_read_exec_load_addr):
1408 * solib-pa64.c (pa64_solib_create_inferior_hook)
1409 (pa64_open_symbol_file_object): Remove local 'buf'.
1410 * solib-som.c (som_solib_create_inferior_hook, link_map_start)
1411 (som_open_symbol_file_object): Likewise.
1412 * solib-spu.c (spu_current_sos): Likewise.
1413 * spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
1414 * spu-multiarch.c (parse_spufs_run, spu_fetch_registers)
1415 (spu_store_registers): Likewise.
1416 * target.c (debug_print_register): Likewise.
1417 * tic6x-tdep.c (tic6x_get_longjmp_target): Likewise.
1418 * xstormy16-tdep.c (xstormy16_store_return_value)
1419 (xstormy16_push_dummy_call, xstormy16_resolve_jmp_table_entry)
1420 (xstormy16_find_jmp_table_entry): Likewise.
1422 2013-03-01 Jiong Wang <jiwang@tilera.com>
1424 * tilegx-tdep.c (tilegx_get_longjmp_target): New function.
1425 (tilegx_gdbarch_init): Install it.
1427 2013-02-28 Tom Tromey <tromey@redhat.com>
1429 * python/py-arch.c (archpy_disassemble): Use PyInt_Check and
1432 2013-02-28 Doug Evans <dje@google.com>
1434 * python/py-finishbreakpoint.c (bpfinishpy_init): gcc -Wall lint.
1435 * python/python.c (gdbpy_find_pc_line): Ditto.
1437 2013-02-28 Tom Tromey <tromey@redhat.com>
1439 * contrib/excheck.py: New file.
1440 * contrib/exsummary.py: New file.
1441 * contrib/gcc-with-excheck: New file.
1443 2013-02-28 Tom Tromey <tromey@redhat.com>
1445 * python/python.c (gdbpy_print_stack): Call begin_line and
1446 fprintf_filtered inside TRY_CATCH.
1448 2013-02-28 Tom Tromey <tromey@redhat.com>
1450 * python/python.c (gdbpy_find_pc_line): Call find_pc_line
1453 2013-02-28 Tom Tromey <tromey@redhat.com>
1455 * py-finishbreakpoint.c (bpfinishpy_init): Reorganize to call
1456 frame_object_to_frame_info inside TRY_CATCH.
1458 2013-02-28 Tom Tromey <tromey@redhat.com>
1460 * py-block.c (gdbpy_block_for_pc): Call block_for_pc inside
1463 2013-02-28 Tom Tromey <tromey@redhat.com>
1465 * objfiles.h (ALL_PSPACE_OBJFILES): Remove trailing backlash.
1467 2013-02-27 Corinna Vinschen <vinschen@redhat.com>
1469 * windows-nat.c: Throughout, fix format strings and casts of
1470 printf-like functions to avoid type related warnings on all
1472 (handle_output_debug_string): Fetch context information address
1473 from debug string using string_to_core_addr.
1475 2013-02-27 Jiong Wang <jiwang@tilera.com>
1477 * regformats/reg-tilegx.dat (name): Change abi name to "tilegx".
1478 * regformats/reg-tilegx32.dat: New.
1480 2013-02-27 Jiong Wang <jiwang@tilera.com>
1482 * configure.tgt (tilegx-*-linux*): Enable gdbserver.
1484 2013-02-27 Jiong Wang <jiwang@tilera.com>
1486 * configure.tgt (tilegx-*-linux*): Replace whitespace with tab.
1488 2013-02-27 Yao Qi <yao@codesourcery.com>
1489 Pedro Alves <palves@redhat.com>
1491 * tracepoint.c (tfile_trace_find): For tfind
1492 pc/tp/range/outside, look for the next trace frame instead of
1493 always starting from frame 0.
1495 2013-02-26 Anthony Green <green@moxielogic.com>
1497 * configure.tgt: Add support for moxie-*-rtems* target.
1499 2013-02-25 Pedro Alves <palves@redhat.com>
1501 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Change
1504 2013-02-24 Maciej W. Rozycki <macro@codesourcery.com>
1506 * mips-tdep.c (mips32_scan_prologue): Reset frame_offset to zero
1507 if $fp is used as the virtual frame pointer.
1509 2013-02-23 Alan Modra <amodra@gmail.com>
1511 * elfread.c (elf_symtab_read): Do not use udata.p here to find
1513 * ppc64-tdep.c (ppc64_elf_make_msymbol_special): New function.
1514 * ppc64-tdep.h (ppc64_elf_make_msymbol_special): Declare.
1515 * ppc-linux-tdep.c (ppc_linux_init_abi): Set up to use the above.
1516 * ppcfbsd-tdep.c (ppcfbsd_init_abi): Likewise.
1518 2013-02-22 Jan Kratochvil <jan.kratochvil@redhat.com>
1521 * elfread.c (build_id_bfd_get): Make the return type const.
1522 (build_id_verify): Make the check parameter const.
1523 (build_id_to_debug_filename): Make the build_id parameter and variable
1525 (find_separate_debug_file_by_buildid): Make the variable build_id const.
1527 2013-02-21 Alan Modra <amodra@gmail.com>
1529 * elfread.c (build_id_bfd_get): Adjust for elf_tdata changes.
1531 2013-02-20 Siva Chandra Reddy <sivachandra@google.com>
1533 Add a new method 'disassemble' to gdb.Architecture class.
1534 * python/py-arch.c (archpy_disassmble): Implementation of the
1535 new method gdb.Architecture.disassemble.
1536 (arch_object_methods): Add entry for the new method.
1538 2013-02-20 Jiong Wang <jiwang@tilera.com>
1540 * MAINTAINERS (Write After Approval): Add myself to the list.
1542 2013-02-19 Pedro Alves <palves@redhat.com>
1544 Garbage collect 'struct monitor_ops'::load_routine.
1546 * monitor.h (struct monitor_ops) <load_routine>: Remove field.
1547 * monitor.c (monitor_load): No longer call
1548 current_monitor->load_routine.
1549 * dbug-rom.c (init_dbug_cmds): Don't set 'load_routine'.
1550 * m32r-rom.c (init_m32r_cmds): Don't set 'load_routine'.
1551 * ppcbug-rom.c (init_ppc_cmds): Don't set 'load_routine'.
1553 2013-02-19 Pedro Alves <palves@redhat.com>
1557 Harmonize with generic_load.
1559 * monitor.c: Include "readline/readline.h".
1560 (monitor_load): Rename parameter 'file' to 'args'. Use build_argv
1561 instead of sscanf. Use CORE_ADDR/strtoulst instead of unsigned
1562 long/strtol for the 'load_offset' local. Error out if no argument
1563 is given or if too many arguments are given. Tilde expand the
1564 passed in file name.
1566 2013-02-19 Kai Tietz <ktietz@redhat.com>
1569 * symfile.c (load_section_data): Change type of load_offset
1571 (generic_load): User strtoulst instead of strtoul for conversion
1574 2013-02-19 Jiong Wang <jiwang@tilera.com>
1576 * tilegx-tdep.c (tilegx_analyze_prologue): add check for
1577 for return address, "lr" register, saved on stack.
1578 * tilegx-tdep.c (tilegx_frame_cache): update "PC" reg
1579 after we invoke tilegx_analyze_prologue.
1581 2013-02-19 Jiong Wang <jiwang@tilera.com>
1583 * tilegx-tdep.c (itilegx_gdbarch_init): char type should be signed.
1585 2013-02-19 Jiong Wang <jiwang@tilera.com>
1587 * tilegx-tdep.c (tilegx_skip_prologue): Use skip_prologue_using_sal.
1589 2013-02-19 Jiong Wang <jiwang@tilera.com>
1591 * tilegx-tdep.c (INT_SWINT_1_SIGRETURN): New macro.
1592 (tilegx_write_pc): New function.
1593 (tilegx_cannot_reference_register): Return zero if REGNO
1594 is TILEGX_FAULTNUM_REGNUM.
1595 (tilegx_gdbarch_init): Add call to set_gdbarch_write_pc.
1596 (tilegx_register_name): Add handling of "faultnum" register.
1597 * tilegx-tdep.h (enum tilegx_regnum): Add TILEGX_FAULTNUM_REGNUM.
1598 * tilegx-linux-tdep.c (tilegx_linux_supply_regset): Add
1599 handling of TILEGX_FAULTNUM_REGNUM.
1600 * tilegx-linux-nat.c (regmap): Add entry for TILEGX_FAULTNUM_REGNUM.
1602 2013-02-19 Jiong Wang <jiwang@tilera.com>
1604 * tilegx-tdep.c (tilegx_push_dummy_call): args pushed on stack
1605 should be aligned to 64bit.
1607 2013-02-19 Kai Tietz <ktietz@redhat.com>
1609 * windows-nat.c (windows_xfer_memory): Fix debug-output
1612 2013-02-19 Lei Liu <lei.liu2@windriver.com>
1614 * mips-linux-nat.c (mips64_linux_regsets_store_registers):
1615 Don't check DSP register number if HAVE_DSP is not set.
1617 2013-02-19 Alan Modra <amodra@gmail.com>
1619 * elfread.c (struct build_id): Delete. Use struct elf_build_id
1620 throughout file instead.
1621 (build_id_bfd_get): Update to use new elf_tdata build_id field.
1622 Don't xmalloc return value.
1623 (build_id_verify): Similarly. Don't xfree.
1624 (build_id_to_debug_filename): Update.
1625 (find_separate_debug_file_by_buildid): Update, don't xfree.
1627 2013-02-18 Tom Tromey <tromey@redhat.com>
1630 * dwarf2read.c (read_subrange_type): Use result of
1633 2013-02-16 Yuanhui Zhang <asmwarrior@gmail.com>
1635 * frame.c: Remove one extra white space after #include
1638 2013-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1640 * contrib/cc-with-tweaks.sh: Extend the comment for -p option.
1642 2013-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1644 * gdb-gdb.gdb.in: Wrap set complaints, b internal_error, b info_command
1645 and dir commands into an if block.
1647 2013-02-15 Sanimir Agovic <sanimir.agovic@intel.com>
1649 * python/py-breakpoint (struct pybp_code): Use int instead of
1652 2013-02-15 Pedro Alves <pedro@codesourcery.com>
1653 Hafiz Abid Qadeer <abidh@codesourcery.com>
1655 * NEWS: Mention new field "trace-file".
1656 * tracepoint.c (trace_status_mi): Output "trace-file" field.
1657 (tfile_open): Record the trace file's filename in the trace
1659 (tfile_files_info): Mention the name of the trace file.
1660 Check the "filename" field explicitely.
1661 (trace_status_command): Explicitely check "filename" field.
1662 (trace_find_command): Ditto.
1663 (trace_find_pc_command): Ditto.
1664 (trace_find_tracepoint_command): Ditto.
1665 (trace_find_line_command): Ditto.
1666 (trace_find_range_command): Ditto.
1667 (trace_find_outside_command): Ditto.
1668 * tracepoint.h (struct trace_status) <from_file>: Rename it
1669 to "filename" and make it hold the trace file's filename
1670 instead of a boolean.
1671 * remote.c (remote_get_trace_status): Initialize "filename"
1672 field with NULL instead of 0.
1674 2013-02-15 Yao Qi <yao@codesourcery.com>
1676 * remote.c: Fix a typo.
1678 2013-02-14 Pierre Muller <muller@sourceware.org>
1680 * contrib/ari/gdb_ari.sh (GNU/Linux rule): Remove.
1682 2013-02-14 Pedro Alves <palves@redhat.com>
1684 * utils.c (savestring): Don't #undef it. Move function to
1685 common/common-utils.c.
1686 * common/common-utils.c: Include gdb_string.h.
1687 (savestring): Move here from utils.c.
1688 * common/common-utils.h (savestring): Declare.
1690 2013-02-14 Pedro Alves <palves@redhat.com>
1692 * utils.c (savestring): Rename parameter 'size' to 'len'.
1694 2013-02-14 Pedro Alves <palves@redhat.com>
1695 Yufeng Zhang <yufeng.zhang@arm.com>
1697 * aarch64-linux-nat.c (aarch64_init_debug_reg_state): Delete.
1698 (aarch64_inferior_data, struct aarch64_inferior_data):
1700 (struct aarch64_process_info): New.
1701 (aarch64_process_list): New global.
1702 (aarch64_find_process_pid, aarch64_add_process)
1703 (aarch64_process_info_get): New functions.
1704 (aarch64_inferior_data_get): Delete.
1705 (aarch64_process_info_get): New function.
1706 (aarch64_forget_process): New function.
1707 (aarch64_get_debug_reg_state): New parameter 'pid'. Reimplement.
1708 (aarch64_linux_prepare_to_resume): Pass the lwp's pid to
1709 aarch64_get_debug_reg_state.
1710 (aarch64_notify_debug_reg_change): Use iterate_over_lwps
1711 instead of linux_nat_iterate_watchpoint_lwps.
1712 (aarch64_linux_new_fork): New function.
1713 (aarch64_linux_child_post_startup_inferior): Use
1714 aarch64_forget_process instead of aarch64_init_debug_reg_state.
1715 (aarch64_handle_breakpoint, aarch64_linux_insert_hw_breakpoint)
1716 (aarch64_linux_remove_hw_breakpoint)
1717 (aarch64_handle_aligned_watchpoint)
1718 (aarch64_handle_unaligned_watchpoint)
1719 (aarch64_linux_insert_watchpoint)
1720 (aarch64_linux_remove_watchpoint)
1721 (aarch64_linux_stopped_data_address): Adjust to pass the current
1722 process id to aarch64_debug_reg_state.
1723 (_initialize_aarch64_linux_nat): Install aarch64_linux_new_fork as
1724 linux_nat_new_fork hook, and aarch64_forget_process as
1725 linux_nat_forget_process hook; remove the call to
1726 register_inferior_data_with_cleanup.
1728 2013-02-14 Pedro Alves <palves@redhat.com>
1730 * eval.c (evaluate_subexp_for_address) <default_case_after_eval,
1731 EVAL_AVOID_SIDE_EFFECTS>: Swap and handle TYPE_CODE_REF before
1734 2013-02-14 Pedro Alves <pedro@codesourcery.com>
1735 Hafiz Abid Qadeer <abidh@codesourcery.com>
1737 * tracepoint.h (validate_trace_state_variable_name): Declare.
1738 * tracepoint.c (validate_trace_state_variable_name): New.
1739 (trace_variable_command): Parse the trace state variable's name
1740 without using parse_expression. Do several validations.
1741 * mi/mi-main.c (mi_cmd_trace_define_variable): Don't parse the
1742 trace state variable's name with parse_expression. Validate it.
1744 2013-02-14 Yao Qi <yao@codesourcery.com>
1746 * infcmd.c (breakpoint_proceeded): Remove it.
1748 2013-02-14 Yao Qi <yao@codesourcery.com>
1750 * tracepoint.c (end_actions_pseudocommand): Make it static.
1751 (while_stepping_pseudocommand): Likewise.
1752 * tracepoint.h (end_actions_pseudocommand): Remove the
1754 (while_stepping_pseudocommand): Likewise.
1756 2013-02-14 Yao Qi <yao@codesourcery.com>
1758 * cli/cli-decode.c (help_cmd): Remove the declaration of
1760 (help_all): Likewise.
1762 2013-02-13 Pedro Alves <palves@redhat.com>
1764 * amd64-linux-nat.c (update_debug_registers_callback):
1766 (amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use
1768 (amd64_linux_prepare_to_resume): Pass the lwp's pid to
1769 i386_debug_reg_state.
1770 (amd64_linux_new_fork): New function.
1771 (_initialize_amd64_linux_nat): Install amd64_linux_new_fork as
1772 linux_nat_new_fork hook, and i386_forget_process as
1773 linux_nat_forget_process hook.
1774 * i386-linux-nat.c (update_debug_registers_callback):
1776 (i386_linux_dr_set_control, i386_linux_dr_set_addr): Use
1778 (i386_linux_prepare_to_resume): Pass the lwp's pid to
1779 i386_debug_reg_state.
1780 (i386_linux_new_fork): New function.
1781 (_initialize_i386_linux_nat): Install i386_linux_new_fork as
1782 linux_nat_new_fork hook, and i386_forget_process as
1783 linux_nat_forget_process hook.
1784 * i386-nat.c (i386_init_dregs): Delete.
1785 (i386_inferior_data, struct i386_inferior_data):
1787 (struct i386_process_info): New.
1788 (i386_process_list): New global.
1789 (i386_find_process_pid, i386_add_process, i386_process_info_get):
1791 (i386_inferior_data_get): Delete.
1792 (i386_process_info_get): New function.
1793 (i386_debug_reg_state): New parameter 'pid'. Reimplement.
1794 (i386_forget_process): New function.
1795 (i386_cleanup_dregs): Rewrite.
1796 (i386_update_inferior_debug_regs, i386_insert_watchpoint)
1797 (i386_remove_watchpoint, i386_region_ok_for_watchpoint)
1798 (i386_stopped_data_address, i386_insert_hw_breakpoint)
1799 (i386_remove_hw_breakpoint): Adjust to pass the current process id
1800 to i386_debug_reg_state.
1801 (i386_use_watchpoints): Don't register inferior data.
1802 * i386-nat.h (i386_debug_reg_state): Add new 'pid' parameter, and
1804 (i386_forget_process): Declare.
1805 * linux-fork.c (delete_fork): Call linux_nat_forget_process.
1806 * linux-nat.c (linux_nat_new_fork, linux_nat_forget_process_hook):
1808 (linux_child_follow_fork): Don't call linux_nat_new_thread here.
1809 (add_initial_lwp): New, factored out from ...
1810 (add_lwp): ... this. Don't check the number of lwps before
1811 calling linux_nat_new_thread.
1812 (linux_nat_iterate_watchpoint_lwps): Delete.
1813 (linux_nat_attach): Use add_initial_lwp instead of add_lwp.
1814 (linux_handle_extended_wait): Call the linux_nat_new_fork hook on
1816 (linux_nat_wait_1): Use add_initial_lwp instead of add_lwp for the
1818 (linux_nat_kill, linux_nat_mourn_inferior): Call
1819 linux_nat_forget_process.
1820 (linux_nat_set_new_fork, linux_nat_set_forget_process)
1821 (linux_nat_forget_process): New functions.
1822 * linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): Delete
1824 (linux_nat_iterate_watchpoint_lwps): Delete declaration.
1825 (linux_nat_new_fork_ftype, linux_nat_forget_process_ftype): New
1827 (linux_nat_set_new_fork, linux_nat_set_forget_process)
1828 (linux_nat_forget_process): New declarations.
1830 * amd64fbsd-nat.c (super_mourn_inferior): New global.
1831 (amd64fbsd_mourn_inferior): New function.
1832 (_initialize_amd64fbsd_nat): Override to_mourn_inferior.
1833 * windows-nat.c (windows_detach): Call i386_cleanup_dregs.
1835 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
1837 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity):
1840 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
1842 * aarch64-linux-nat.c (debug_reg_change_callback)
1843 (aarch64_linux_get_debug_reg_capacity): ARI fix: Replace %llx with
1846 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
1848 * aarch64-linux-nat.c (dr_changed_t): ARI fix: Replace long long
1851 2013-02-13 Pedro Alves <palves@redhat.com>
1852 Hafiz Abid Qadeer <abidh@codesourcery.com>
1854 * c-lang.c (c_op_print_tab): Add entry for UNOP_PLUS.
1856 2013-02-12 Tom Tromey <tromey@redhat.com>
1859 * c-exp.y (lex_one_token): Initialize other fields of yylval on
1861 (classify_inner_name): Remove 'first_name' argument, add
1862 'context'. Remove unused variable.
1863 (yylex): Explicitly maintain the context type. Exit loop earlier
1864 if NAME result is seen.
1866 2013-02-12 Pedro Alves <palves@redhat.com>
1868 * amd64-darwin-tdep.c: Add (C) after Copyright.
1869 * cli/cli-cmds.h: Ditto.
1870 * cli/cli-decode.c: Ditto.
1871 * cli/cli-decode.h: Ditto.
1872 * cli/cli-dump.c: Ditto.
1873 * cli/cli-dump.h: Ditto.
1874 * cli/cli-interp.c: Ditto.
1875 * cli/cli-logging.c: Ditto.
1876 * cli/cli-script.c: Ditto.
1877 * cli/cli-script.h: Ditto.
1878 * cli/cli-setshow.c: Ditto.
1879 * cli/cli-setshow.h: Ditto.
1880 * cli/cli-utils.c: Ditto.
1881 * cli/cli-utils.h: Ditto.
1882 * config/alpha/nm-osf3.h: Ditto.
1883 * config/djgpp/djconfig.sh: Ditto.
1884 * config/i386/nm-fbsd.h: Ditto.
1885 * config/i386/nm-i386gnu.h: Ditto.
1886 * config/nm-linux.h: Ditto.
1887 * config/nm-nto.h: Ditto.
1888 * config/rs6000/nm-rs6000.h: Ditto.
1889 * config/sparc/nm-sol2.h: Ditto.
1890 * darwin-nat-info.c: Ditto.
1893 * gdb-demangle.h: Ditto.
1894 * i386-darwin-nat.c: Ditto.
1895 * i386-darwin-tdep.c: Ditto.
1896 * linux-fork.h: Ditto.
1897 * m32c-tdep.c: Ditto.
1898 * microblaze-linux-tdep.c: Ditto.
1899 * microblaze-rom.c: Ditto.
1900 * microblaze-tdep.c: Ditto.
1901 * microblaze-tdep.h: Ditto.
1902 * mips-linux-tdep.h: Ditto.
1903 * ppc-ravenscar-thread.c: Ditto.
1904 * ppc-ravenscar-thread.h: Ditto.
1905 * prologue-value.c: Ditto.
1906 * prologue-value.h: Ditto.
1907 * ravenscar-thread.c: Ditto.
1908 * ravenscar-thread.h: Ditto.
1909 * sparc-ravenscar-thread.c: Ditto.
1910 * sparc-ravenscar-thread.h: Ditto.
1911 * tilegx-linux-tdep.c: Ditto.
1912 * unwind_stop_reasons.def: Ditto.
1913 * windows-nat.h: Ditto.
1914 * xtensa-linux-tdep.c: Ditto.
1915 * xtensa-xtregs.c: Ditto.
1916 * regformats/regdat.sh: Ditto.
1917 * regformats/regdef.h: Ditto.
1919 2013-02-12 Pedro Alves <palves@redhat.com>
1921 * break-catch-sig.c: Update copyright years.
1923 2013-02-11 Siva Chandra Reddy <sivachandra@google.com>
1925 Add support for a destructor for ui_out data and use it to
1926 provide a ui_out destructor.
1927 * ui-out.h: Declare the new ui_out destructor.
1928 (ui_out_impl): Add a field for data destructor in ui_out_impl.
1929 * ui-out.c (default_data_destroy): Add a default data destructor
1931 (default_ui_out_impl): Set the new data_destroy field to
1932 default_data_destroy
1933 (uo_data_destroy): Local function which invokes the data
1934 destructor if present.
1935 (clear_table): Local function which clears the table data of a
1937 (ui_out_destroy): Public function which frees a ui_out object.
1938 (ui_out_table_end): Use the new clear_table function.
1939 * cli-out.c (cli_ui_out_impl): Set the new data_destroy field to
1941 * mi/mi-out.c (mi_ui_out_impl): Set the new data_destroy field
1944 2013-02-11 Doug Evans <dje@google.com>
1946 * printcmd.c (printf_c_string,printf_wide_c_string): New functions.
1947 (printf_decfloat): New function. Broken out from ui_printf.
1948 Remove unnecessary code to shift the entire format string down.
1949 (printf_pointer): New function.
1950 (ui_printf): Code to print C strings, wide C strings, decfloats,
1951 and pointers moved to separate functions.
1953 2013-02-11 Sergio Durigan Junior <sergiodj@redhat.com>
1955 * valops.c (value_assign): Handling bitfield offset in
1956 `lval_internalvar_component' case.
1958 2013-02-08 Doug Evans <dje@google.com>
1960 * common/format.c (parse_format_string): Fix whitespace.
1962 2013-02-08 Matthew Gretton-Dann <matthew.gretton-dann@linaro.org>
1964 * stack.c (return_command): Work around uninitialized variable
1967 2013-02-08 Yufeng Zhang <yufeng.zhang@arm.com>
1969 * aarch64-linux-tdep.c (AARCH64_LINUX_SIZEOF_GREGSET): Change the
1970 number of the registers from 36 to 34.
1972 2013-02-08 Marcus Shawcroft <marcus.shawcroft@arm.com>
1974 * NEWS: Mention new AArch64 native and target support.
1976 2013-02-08 Marcus Shawcroft <marcus.shawcroft@arm.com>
1978 * MAINTAINERS (Write After Approval): Add myself.
1980 2013-02-08 Jim MacArthur <jim.macarthur@arm.com>
1981 Marcus Shawcroft <marcus.shawcroft@arm.com>
1982 Nigel Stephens <nigel.stephens@arm.com>
1983 Yufeng Zhang <yufeng.zhang@arm.com>
1985 * aarch64-linux-nat.c: New file.
1986 * config/aarch64/linux.mh: New file.
1987 * configure.host: Add AArch64.
1988 * Makefile.in (ALLDEPFILES): Add aarch64-linux-nat.c.
1990 2013-02-07 Doug Evans <dje@google.com>
1992 * cli/cli-cmds.c (_initialize_cli_cmds): Clarify argument to
1993 disassemble command.
1995 2013-02-07 Marcus Shawcroft <marcus.shawcroft@arm.com>
1997 * aarch64-linux-tdep.c (aarch64_linux_init_abi): Call
1998 set_gdbarch_fetch_tls_load_module_address.
2000 2013-02-06 David S. Miller <davem@davemloft.net>
2002 * sparc-tdep.c (sparc32_return_value): Handle writing return value when
2003 using RETURN_VALUE_ABI_PRESERVES_ADDRESS.
2004 * value.c (struct_return_convention): New function.
2005 (using_struct_return): Implement in terms of struct_return_convention.
2006 * value.h (struct_return_convention): Declare.
2007 * stack.c (return_command): Allow successful overriding of the return
2008 value when RETURN_VALUE_ABI_PRESERVES_ADDRESS.
2010 2013-02-06 Tom Tromey <tromey@redhat.com>
2012 * python/py-type.c (typy_strip_typedefs): Don't call check_typedef
2013 outside of TRY_CATCH.
2015 2013-02-06 Yao Qi <yao@codesourcery.com>
2017 * mi/mi-interp.c: Include "tracepoint.h".
2018 (mi_tsv_modified): Declare.
2019 (mi_tsv_created, mi_tsv_deleted): Update declaration.
2020 (mi_interpreter_init): Call observer_attach_tsv_modified.
2021 (mi_tsv_modified): New.
2022 (mi_tsv_created, mi_tsv_deleted): Update.
2023 * tracepoint.c (trace_variable_command): Call
2024 observer_notify_tsv_modified if the initial value of tsv is
2026 (delete_trace_state_variable): Call
2027 observer_notify_tsv_deleted earlier.
2028 (trace_variable_command): Caller update.
2029 (create_tsv_from_upload): Likewise.
2030 * observer.sh: Declare "struct trace_state_variable".
2032 * NEWS: Mention the new MI notification "=tsv-modified".
2034 2013-02-05 Doug Evans <dje@google.com>
2036 * completer.c (location_completer): Fix typo in comment.
2038 2013-02-05 Jan Kratochvil <jan.kratochvil@redhat.com>
2040 * breakpoint.c (add_location_to_breakpoint): Insert the location with
2043 2013-02-05 Marcus Shawcroft <marcus.shawcroft@arm.com>
2045 * aarch64-tdep.c (aarch64_analyze_prologue): ARI fix:
2046 Refactor if statement to avoid trailing || operator.
2048 2013-02-05 Andreas Tobler <andreast@fgznet.ch>
2050 * NEWS: Add PowerPC FreeBSD as a new native configuration.
2052 2013-02-04 Andreas Tobler <andreast@fgznet.ch>
2054 * Makefile.in (ALL_TARGET_OBS): Add powerpc FreeBSD files.
2055 * configure.host: Add powerpc*-*-freebsd* target.
2056 * configure.tgt: Add target info for powerpc*-*-freebsd*.
2057 * ppcfbsd-nat.c, ppcfbsd-tdep.h, ppcfbsd-tdep.c: New files.
2058 * config/powerpc/fbsd.mh: New file.
2060 2013-02-04 Sergio Durigan Junior <sergiodj@redhat.com>
2061 Denys Vlasenko <dvlasenk@redhat.com>
2062 Pedro Alves <palves@redhat.com>
2064 * gdbarch.sh (elfcore_write_linux_prpsinfo): New F hook.
2065 (struct elf_internal_linux_prpsinfo): Forward declare.
2066 * gdbarch.h, gdbarch.c: Regenerate.
2067 * linux-tdep.c: Include `cli/cli-utils.h'.
2068 (linux_fill_prpsinfo): New function.
2069 (linux_make_corefile_notes): Use linux_fill_prpsinfo. If there's
2070 an elfcore_write_linux_prpsinfo hook, use it, otherwise, use
2071 elfcore_write_linux_prpsinfo32 or elfcore_write_linux_prpsinfo64
2072 depending on gdbarch pointer bitness.
2073 * ppc-linux-tdep.c: Include elf-bfd.h.
2074 (ppc_linux_init_abi): Hook in elfcore_write_ppc_linux_prpsinfo32
2077 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2078 Marcus Shawcroft <marcus.shawcroft@arm.com>
2079 Nigel Stephens <nigel.stephens@arm.com>
2080 Yufeng Zhang <yufeng.zhang@arm.com>
2082 * configure.tgt (aarch64*-*-linux*): Set build_gdbserver=yes.
2084 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2085 Marcus Shawcroft <marcus.shawcroft@arm.com>
2086 Nigel Stephens <nigel.stephens@arm.com>
2087 Yufeng Zhang <yufeng.zhang@arm.com>
2089 * aarch64-newlib-tdep.c: New file.
2090 * configure.tgt: Add aarch64-newlib-tdep.o to gdb_target_obs of
2092 * defs.h (enum gdb_osabi): Add GDB_OSABI_NEWLIB.
2093 * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-newlib-tdep.o.
2094 (ALLDEPFILES): Add aarch64-newlib-tdep.c.
2095 * osabi.c (gdb_osabi_names): Add "Newlib".
2097 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2098 Marcus Shawcroft <marcus.shawcroft@arm.com>
2099 Nigel Stephens <nigel.stephens@arm.com>
2100 Yufeng Zhang <yufeng.zhang@arm.com>
2102 * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-linux-tdep.o.
2103 (ALLDEPFILES): Add aarch64-linux-tdep.c.
2104 * aarch64-linux-tdep.c: New file.
2105 * aarch64-linux-tdep.h: New file.
2106 * aarch64-tdep.h (gdbarch_tdep): Define gregset and fpregset.
2107 * configure.tgt: Add aarch64-none-linux-gnu.
2109 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2110 Marcus Shawcroft <marcus.shawcroft@arm.com>
2111 Nigel Stephens <nigel.stephens@arm.com>
2112 Yufeng Zhang <yufeng.zhang@arm.com>
2114 * Makefile.in (ALL_64_TARGET_OBS): Add arch64-tdep.o.
2115 (HFILES_NO_SRCDIR): Add aarch64-tdep.h.
2116 (ALLDEPFILES): Add aarch64-tdep.c.
2117 * aarch64-tdep.c: New file.
2118 * aarch64-tdep.h: New file.
2119 * configure.tgt: Add AArch64.
2120 * features/Makefile (WHICH): Add aarch64 and aarch64-without-fpu.
2121 (aarch64-expedite): New definition.
2122 * features/aarch64-core.xml: New file.
2123 * features/aarch64-fpu.xml: New file.
2124 * features/aarch64-without-fpu.c: New file (generated).
2125 * features/aarch64-without-fpu.xml: New file.
2126 * features/aarch64.c: New file (generated).
2127 * features/aarch64.xml: New file.
2128 * regformats/aarch64-without-fpu.dat: New file (generated).
2129 * regformats/aarch64.dat: New file (generated).
2131 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2133 * contrib/expect-read1.c: New file.
2134 * contrib/expect-read1.sh: New file.
2136 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2138 * dwarf2read.c (file_file_name): New function with code from
2140 (file_full_name): Move most of the code to file_file_name.
2141 (macro_start_file): Rename variable full_name to file_name and use
2142 file_file_name for it. Add comp_dir parameter to new_macro_table.
2143 * macrocmd.c (show_pp_source_pos): New variable fullname. Replace any
2144 macro_source_file->filename access by macro_source_fullname call.
2145 * macroscope.c (_initialize_macroscope): Update the new_macro_table
2147 * macrotab.c (struct macro_table): New field comp_dir.
2148 (macro_include): New variables link_fullname and source_fullname.
2149 Replace any macro_source_file->filename access by macro_source_fullname
2151 (macro_lookup_inclusion): Remove the partial filenames checking code.
2152 (check_for_redefinition): New variables source_fullname and
2153 found_key_fullname. Replace any macro_source_file->filename access by
2154 macro_source_fullname call.
2155 (macro_undef): New variables source_fullname and key_fullname. Replace
2156 any macro_source_file->filename access by macro_source_fullname call.
2157 (macro_lookup_definition): New variables retval and source_fullname.
2158 Replace any macro_source_file->filename access by macro_source_fullname
2160 (foreach_macro): New variable key_fullname. Replace any
2161 macro_source_file->filename access by macro_source_fullname call.
2162 (foreach_macro_in_scope): New variable datum_fullname. Replace any
2163 macro_source_file->filename access by macro_source_fullname call.
2164 (new_macro_table): Add parameter comp_dir. Initialize T with it.
2165 (macro_source_fullname): New function.
2166 * macrotab.h (struct macro_source_file): Extent the filename field
2168 (new_macro_table): New parameter comp_dir, add a comment for it.
2169 (macro_source_fullname): new declaration.
2171 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2173 * dwarf2read.c (dw2_map_symtabs_matching_filename): Move variable
2174 this_real_name to outer block. Use it also for
2175 compare_filenames_for_search.
2176 (dw2_expand_symtabs_matching): New variable this_real_name. Use it
2177 with dw2_get_real_path for file_matcher, considering also
2178 BASENAMES_MAY_DIFFER.
2179 (file_full_name): Prepend COMP_DIR even for relative lh->INCLUDE_DIRS.
2181 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2183 * dwarf2read.c (dw2_expand_symtabs_matching): Add basenames parameter
2184 to the file_matcher parameter. Pass 0 to it.
2185 (dwarf2_create_include_psymtab): Copy also DIRNAME.
2186 * psymtab.c (partial_map_symtabs_matching_filename): Drop handling of
2187 NULL psymtab_to_fullname result.
2188 (psymtab_to_fullname): Remove variable r. Never return NULL, assemble
2189 an expected filename instead.
2190 (expand_symtabs_matching_via_partial): Add basenames parameter to the
2191 file_matcher parameter. Call also psymtab_to_fullname, after newly
2192 considering BASENAMES_MAY_DIFFER.
2193 * source.c (rewrite_source_path): Remove static.
2194 * source.h (rewrite_source_path): New declaration.
2195 * symfile.h (struct quick_symbol_functions): Add basenames parameter to
2196 the expand_symtabs_matching field. Comment it.
2197 * symtab.c (file_matches): New function comment. Add parameter
2198 basenames, implement it.
2199 (search_symbols_file_matches): Add basenames parameter. Update the
2200 file_matches caller.
2201 (search_symbols): Match FILES also against symtab_to_fullname.
2202 Optimize it for BASENAMES_MAY_DIFFER.
2204 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2206 * source.c (print_source_lines_base): Print for TUI also "fullname".
2207 * tui/tui-data.c (init_content_element): Change tui_locator_element
2209 * tui/tui-data.h (struct tui_locator_element): Likewise.
2210 * tui/tui-disasm.c (tui_show_disassem_and_update_source): Rename
2211 tui_update_locator_filename calls to tui_update_locator_fullname.
2212 Replace symtab->filename refererence by symtab_to_fullname call.
2213 * tui/tui-out.c (tui_field_string): Check for "fullname" now.
2214 * tui/tui-source.c (tui_set_source_content): Change tui_locator_element
2215 field to full_name. Replace symtab->filename refererence by
2216 symtab_to_fullname call.
2217 (tui_show_symtab_source): Rename parameter to fullname. Change
2218 tui_locator_element field to full_name.
2219 * tui/tui-stack.c: Include source.h.
2220 (tui_set_locator_filename): Rename the declaration to ...
2221 (tui_set_locator_fullname): ... here. Rename its parameter to
2222 fullname, updates its comment.
2223 (tui_set_locator_info): Rename its parameter to fullname.
2224 (tui_set_locator_filename): Rename the definition to ...
2225 (tui_set_locator_fullname): ... here. Rename its parameter to
2226 fullname, updates its comment. Change tui_locator_element field to
2228 (tui_set_locator_info): Rename its parameter to fullname.
2229 (tui_set_locator_info): Rename callee to tui_set_locator_fullname.
2230 (tui_update_locator_filename): Rename to ...
2231 (tui_update_locator_fullname): ... here. Rename callee to
2232 tui_set_locator_fullname.
2233 (tui_show_frame_info): Replace symtab->filename refererence by
2234 symtab_to_fullname call.
2235 * tui/tui-stack.h (tui_update_locator_filename): Rename to ...
2236 (tui_update_locator_fullname): ... here.
2237 * tui/tui-winsource.c (tui_display_main): Rename the callee to
2238 tui_update_locator_fullname. Replace symtab->filename refererence by
2239 symtab_to_fullname call.
2240 * tui/tui.c (tui_show_source): Rename its parameter to fullname.
2241 Rename the callee to tui_update_locator_fullname.
2242 * tui/tui.h (tui_show_source): Rename its parameter to fullname.
2244 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2246 * ada-lang.c (user_select_syms): Replace symtab->filename refererences
2247 by symtab_to_filename_for_display calls.
2248 * breakpoint.c (print_breakpoint_location, resolve_sal_pc): Likewise.
2249 (clear_command): New variable sal_fullname, initialize it. Replace
2250 compare_filenames_for_search by filename_cmp with sal_fullname.
2251 (say_where, update_static_tracepoint): Replace symtab->filename
2252 refererences by symtab_to_filename_for_display calls.
2253 * cli/cli-cmds.c (edit_command, list_command, ambiguous_line_spec):
2255 * dwarf2read.c: Include source.h.
2256 (fixup_go_packaging): Replace symtab->filename refererences by
2257 symtab_to_filename_for_display calls.
2258 * linespec.c (add_sal_to_sals): Rename variable filename to fullname.
2259 Replace symtab->filename refererences by symtab_to_filename_for_display
2261 (create_sals_line_offset, convert_linespec_to_sals): New variable
2262 fullname, initialize it, replace symtab->filename reference by the
2264 * linux-fork.c: Include source.h.
2265 (info_checkpoints_command): Replace symtab->filename refererences by
2266 symtab_to_filename_for_display calls.
2267 * macroscope.c (sal_macro_scope): Replace symtab->filename refererences
2268 by symtab_to_filename_for_display calls.
2269 * mdebugread.c: Include source.h.
2270 (psymtab_to_symtab_1): Replace symtab->filename refererences by
2271 symtab_to_filename_for_display calls.
2272 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
2273 (mi_cmd_file_list_exec_source_files): Likewise.
2274 * printcmd.c: Include source.h.
2275 (build_address_symbolic): Replace symtab->filename refererences by
2276 symtab_to_filename_for_display calls.
2277 * psymtab.c (partial_map_symtabs_matching_filename)
2278 (read_psymtabs_with_fullname): Call compare_filenames_for_search also
2279 with psymtab_to_fullname.
2280 * python/py-symtab.c (stpy_str): Replace symtab->filename refererences
2281 by symtab_to_filename_for_display calls.
2282 (stpy_get_filename): New variable filename, initialize it, use instead
2283 of symtab->filename refererences.
2284 (salpy_str): Make variable filename const char *. Replace
2285 symtab->filename refererences by symtab_to_filename_for_display calls.
2286 * skip.c: Include source.h and filenames.h.
2287 (skip_file_command): Remove const from the symtab variable. Replace
2288 symtab->filename refererences by symtab_to_fullname call.
2289 (function_name_is_marked_for_skip): New variables searched_for_fullname
2290 and fullname. Use them to search also with symtab's fullname.
2291 * source.c (find_source_lines): Replace symtab->filename refererences
2292 by symtab_to_filename_for_display calls.
2293 (print_source_lines_base): New variable filename, use it instead of
2294 symtab->filename. Replace symtab->filename refererences by
2295 symtab_to_filename_for_display calls.
2296 (line_info, forward_search_command): Replace symtab->filename
2297 refererences by symtab_to_filename_for_display calls.
2298 (reverse_search_command): Replace symtab->filename refererences by
2299 symtab_to_filename_for_display calls. New variable filename for it.
2300 * stack.c (frame_info): Likewise.
2301 * symmisc.c: Include source.h.
2302 (dump_objfile, dump_symtab_1, maintenance_print_symbols)
2303 (maintenance_info_symtabs): Replace symtab->filename refererences by
2304 symtab_to_filename_for_display calls.
2305 * symtab.c (iterate_over_some_symtabs): Call
2306 compare_filenames_for_search also with symtab_to_fullname.
2307 (lookup_symbol_aux_quick, basic_lookup_transparent_type_quick): Replace
2308 symtab->filename refererences by symtab_to_filename_for_display calls.
2309 (find_line_symtab): Replace symtab->filename refererences by
2310 symtab_to_filename_for_display calls.
2311 (file_matches): Replace filename_cmp by compare_filenames_for_search.
2312 (print_symbol_info): Make the last parameter const char *. New
2313 variable s_filename. Use it in the function.
2314 (symtab_symbol_info): Make the last_filename variable const char *.
2315 Replace symtab->filename refererences by symtab_to_filename_for_display
2317 (rbreak_command): New variable fullname. Use it. Replace
2318 symtab->filename refererence by symtab_to_filename_for_display call.
2319 * tracepoint.c (set_traceframe_context, trace_find_line_command)
2320 (print_one_static_tracepoint_marker): Replace symtab->filename
2321 refererences by symtab_to_filename_for_display calls.
2322 * tui/tui-source.c (tui_set_source_content): New variables filename and
2323 s_filename. Replace symtab->filename refererences by this variable.
2324 Replace other symtab->filename refererences by
2325 symtab_to_filename_for_display calls.
2327 2013-02-03 Eldar Gaynetdinov <hal9000ed2k@gmail.com>
2328 Jan Kratochvil <jan.kratochvil@redhat.com>
2330 Add a new variable that controls a way in which filenames are
2332 * NEWS (set filename-display): New entry.
2333 * source.c (filename_display_basename, filename_display_relative)
2334 (filename_display_absolute, filename_display_kind_names)
2335 (filename_display_string, show_filename_display_string)
2336 (symtab_to_filename_for_display): New.
2337 (_initialize_source): Added initialization of 'filename-display'
2339 * source.h (symtab_to_filename_for_display): Added declaration.
2340 * stack.c (print_frame): Added new variable and calling of a new
2341 function and condition with this variable. Changed third argument of
2342 calling of a function.
2344 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2346 * tui/tui-data.c (init_win_info, tui_del_window, tui_free_window):
2347 Rename field reference filename to fullname.
2348 * tui/tui-data.h (struct tui_source_info): Rename field filename to
2349 fullname. New comment for it.
2350 * tui/tui-source.c (tui_set_source_content): Rename field reference
2351 filename to fullname. Initialize field by symtab_to_fullname now.
2352 * tui/tui-winsource.c (tui_update_breakpoint_info): Rename field
2353 reference filename to fullname. Use symtab_to_fullname during
2356 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2359 * dwarf2read.c (dw2_expand_symtabs_with_filename): Rename to ...
2360 (dw2_expand_symtabs_with_fullname): ... here. Rename parameter
2361 filename to fullname. Rename variable this_name to this_fullname.
2362 Lowercase FILENAME_CMP call.
2363 (dw2_find_symbol_file): New comment for the returned string.
2364 (dwarf2_gdb_index_functions): Rename the function to
2365 dw2_expand_symtabs_with_fullname.
2366 * psymtab.c (read_psymtabs_with_filename): Rename to ...
2367 (read_psymtabs_with_fullname): ... here. Rename parameter filename to
2369 (psym_functions): Rename the function to read_psymtabs_with_fullname.
2370 * symfile.h (struct quick_symbol_functions): Rename field
2371 expand_symtabs_with_filename to expand_symtabs_with_fullname and its
2372 parameter filename to fullname. Document returned string meaning for
2374 * symtab.c (find_line_symtab): Rename the called function to
2375 expand_symtabs_with_fullname.
2377 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2380 * breakpoint.c (clear_command): Remove variable is_abs, unify the
2381 call of filename_cmp with compare_filenames_for_search.
2382 * dwarf2read.c (dw2_map_symtabs_matching_filename): Remove variable
2383 is_abs, unify the call of FILENAME_CMP with
2384 compare_filenames_for_search. New gdb_asserts for real_path and name.
2385 Unify the call of compare_filenames_for_search with FILENAME_CMP.
2386 * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
2387 * symfile.h (struct quick_symbol_functions): Extend the comment for
2388 map_symtabs_matching_filename.
2389 * symtab.c (compare_filenames_for_search): Remove the function comment
2390 relative path requirement. Handle absolute filenames, with a comment.
2391 (iterate_over_some_symtabs): Remove variable is_abs, unify the call of
2392 FILENAME_CMP with compare_filenames_for_search. New gdb_asserts for
2393 real_path and name. Unify the call of compare_filenames_for_search
2395 (iterate_over_symtabs): New gdb_assert on REAL_PATH.
2397 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2400 * breakpoint.c (print_breakpoint_location): Replace bp_location field
2401 source_file references by symtab field references. Remove variables
2403 (momentary_breakpoint_from_master, add_location_to_breakpoint):
2404 (clear_command, say_where): Replace bp_location field source_file
2405 references by symtab field references.
2406 (bp_location_dtor): Remove the source_file reference.
2407 (update_static_tracepoint): Replace bp_location field source_file
2408 references by symtab field references.
2409 (breakpoint_free_objfile): New function.
2410 * breakpoint.h (struct bp_location): Extend the comment for line_number.
2411 Replace the field source_file by field symtab, extend its comment.
2412 (breakpoint_free_objfile): New declaration.
2413 * objfiles.c (free_objfile): Call breakpoint_free_objfile.
2414 * tui/tui-winsource.c (tui_update_breakpoint_info): Replace bp_location
2415 field source_file references by symtab field references.
2417 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2419 Replace xfullpath calls by gdb_realpath calls.
2420 * cli/cli-cmds.c (find_and_open_script): Remove xfullpath from the
2422 * dwarf2read.c (dw2_map_expand_apply): Remove parameter full_path.
2423 Remove it from the iterate_over_some_symtabs call.
2424 (dw2_map_symtabs_matching_filename): Remove parameter full_path.
2425 Remove it from the dw2_map_expand_apply calls, remove a block handling
2427 * psymtab.c (partial_map_expand_apply): Remove parameter full_path.
2428 Remove it from the iterate_over_some_symtabs call.
2429 (partial_map_symtabs_matching_filename): Remove parameter full_path.
2430 Remove it from the partial_map_expand_apply calls, remove a block
2431 handling it. Drop gdb_realpath call and cleanups from the real_path
2433 * source.c (openp): Drop the comment part about xfullpath. Replace
2434 xfullpath calls by gdb_realpath calls.
2435 (find_and_open_source): Replace xfullpath call by gdb_realpath call.
2436 * symfile.h (struct quick_symbol_functions): Remove parameter full_path
2437 from method map_symtabs_matching_filename and its comment.
2438 * symmisc.c (maintenance_print_msymbols): Replace xfullpath call by
2440 * symtab.c (iterate_over_some_symtabs): Remove parameter full_path,
2441 remove it also from the function comment, remove a block handling it.
2442 Drop gdb_realpath call and cleanups from the real_path handling.
2443 (iterate_over_symtabs): Drop variable full_path and its use.
2444 * symtab.h (iterate_over_some_symtabs): Remove parameter full_path.
2445 * utils.c (xfullpath): Remove.
2446 * utils.h (xfullpath): Remove.
2448 2013-02-01 Andreas Tobler <andreast@fgznet.ch>
2450 * Makefile.in (ALL_TARGET_OBS): Add ppc64-tdep.o.
2451 (HFILES_NO_SRCDIR): Add ppc64-tdep.h.
2452 (ALLDEPFILES): Add ppc64-tdep.c.
2453 * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
2454 ppc64-tdep.o to gdb_target_obs.
2455 * ppc64-tdep.h: New file.
2456 * ppc64-tdep.c: New file.
2457 (insn_d, insn_ds, insn_xfx, ppc64_desc_entry_point): Move from
2458 ppc-linux-tdep.c to here.
2459 (PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN)
2460 (PPC64_STANDARD_LINKAGE2_LEN): Likewise and use ARRAY_SIZE macro.
2461 (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target)
2462 (ppc64_standard_linkage3_target, ppc64_skip_trampoline_code): Move
2463 from ppc-linux-tdep.c to here.
2464 (ppc64_convert_from_func_ptr_addr): Rename from
2465 ppc64_linux_convert_from_func_ptr_addr to
2466 ppc64_convert_from_func_ptr_addr and move from ppc-linux-tdep.c to
2469 (read_insn): Move from ppc-linux-tdep.c to here.
2470 (insns_match_pattern, insn_d_field, insn_ds_field): Move
2471 from ppc-linux-tdep.c to here and rename them with the ppc_ prefix.
2472 * ppc-linux-tdep.c: Include ppc64-tdep.h.
2473 Removed above functions.
2474 (ppc_linux_init_abi): Adjust.
2476 2013-02-01 Aleksandar Ristovski <aristovski@qnx.com>
2478 * ada-valprint.c (ada_print_floating): Remove unused 'len'.
2480 2013-02-01 Aleksandar Ristovski <aristovski@qnx.com>
2482 * ada-lang.c (assign_aggregate): Remove unused 'is_array_aggregate'.
2484 2013-02-01 Pedro Alves <palves@redhat.com>
2486 * dummy-frame.c (deprecated_pc_in_call_dummy): Delete function.
2487 * frame.h (deprecated_pc_in_call_dummy): Delete declaration.
2489 2013-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
2491 * elfread.c (elf_symfile_read): Limit separate debug info additions to
2492 files with no separate debug info.
2493 * objfiles.c (add_separate_debug_objfile): Add gdb_assert calls.
2494 * symfile.c (read_symbols): Call find_separate_debug_file_in_section
2495 only for files with no separate debug info.
2497 2013-01-31 Tom Tromey <tromey@redhat.com>
2499 * jit.c (jit_program_space_data): Rename from jit_inferior_data;
2501 (struct jit_program_space_data): Rename from jit_inferior_data.
2503 (get_jit_program_space_data): Rename from get_jit_inferior_data.
2504 Change return type. Attach data to program space.
2505 (jit_program_space_data_cleanup): Rename from
2506 jit_inferior_data_cleanup; change argument type.
2507 (jit_read_descriptor): Change 'inf_data' argument to 'ps_data',
2509 (jit_register_code): Update.
2510 (jit_update_inferior_cache): Remove.
2511 (jit_breakpoint_deleted): Get jit data from the location's program
2513 (jit_breakpoint_re_set_internal): Rename 'inf_data' argument to
2514 'ps_data', change type.
2515 (jit_inferior_init, jit_breakpoint_re_set_internal)
2516 (jit_event_handler): Update.
2517 (free_objfile_data): Get data from objfile's program space.
2518 (_initialize_jit): Update.
2520 2013-01-31 Tom Tromey <tromey@redhat.com>
2523 * jit.c (struct jit_inferior_data) <cached_code_address,
2524 jit_breakpoint>: New fields.
2525 (jit_breakpoint_re_set_internal): Fix logging. Only create
2526 breakpoint if cached address has changed.
2527 (jit_update_inferior_cache, jit_breakpoint_deleted): New
2529 (_initialize_jit): Register breakpoint deleted observer.
2531 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2533 * infrun.c (handle_syscall_event): Remove unused gdbarch.
2534 (save_infcall_suspend_state): Ifdef out unused inf.
2535 (restore_infcall_suspend_state): Ifdef out unused inf.
2536 * jit.c (jit_register_code): Remove unused i, b, inf_data.
2537 (jit_frame_sniffer): Remove unused inf_data.
2539 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2541 * c-exp.y (classify_inner_name): Remove unused type.
2542 * c-lang.c (c_printstr): Remove unused byte_order, i, things_printed,
2543 in_quotes, need_comma, wchar_buf, output, cleanup, iter, finished,
2545 (c_get_string): Remove unused kind.
2546 * c-typeprint.c (c_type_print_args): Remove unused i, len, args, table2.
2548 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2550 * charset.c (intermediate_encoding): Remove unused i.
2551 * completer.c (signal_completer): Remove unused i.
2552 * continuations.c (discard_my_continuations_1): Remove unused
2554 * corelow.c (core_close): Remove unuseD name.
2555 (get_core_siginfo): Remove unused pid.
2556 * cp-namespace.c (cp_lookup_symbol_imports_or_template): Remove unused
2558 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Remove unused base_offset.
2559 (loclist_describe_location): Remove unused first.
2560 * event-top.c (command_line_handler): Remove unused got_eof.
2561 * exec.c (exec_close_1): Remove unused need_symtab_cleanup.
2562 (resize_section_table): Remove unused old_value.
2563 * gdb_bfd.c (gdb_bfd_map_section): Remove unused header.
2564 * gnu-v3-abi.c (compute_vtable_size): Remove unused addr.
2565 * i386-tdep.c (i386_process_record): Remove unused rex.
2566 * infcmd.c (get_return_value): Remove unused uiout.
2567 * jv-lang.c (type_from_class): Remove unused is_array.
2568 * jv-valprint.c (java_val_print): Remove unused i.
2569 * linux-nat.c (linux_nat_stop_lwp): Remove unused ptid.
2570 * linux-thread-db.c (thread_db_find_new_threads_2): Remove unuseD pid.
2571 * m2-typeprint.c (m2_print_type): Remove unused code.
2572 * macroexp.c (get_character_constant): Remove unused body_start.
2573 (macro_stringify): Remove unused result.
2574 * objc-lang.c (find_methods): Remove unused gdbarch.
2575 * objfiles.c (filter_overlapping_sections): Remove unused abfd1, abfd2.
2576 * regcache.c (regcache_cooked_read): Remove unused gdbarch.
2577 * stack.c (print_frame_args): Remove unused summary.
2578 * thread.c (thread_apply_command): Remove unused p.
2579 * valarith.c (value_x_unop): Remove unused mangle_ptr.
2580 * valops.c (search_struct_method): Remove unused skip.
2581 * valprint.c (generic_val_print): Remove unused byte_order.
2582 * varobj.c (varobj_update): Remove unused changed.
2583 * cli/cli-cmds.c (complete_command): Remove unused next_item.
2584 (alias_command): Remove unused c.
2585 * mi/mi-cmd-catch.c (mi_catch_load_unload): Remove unused c.
2586 * mi/mi-main.c (mi_cmd_data_write_register_values): Remove unused
2588 (mi_cmd_data_write_memory): Remove unused word_format.
2589 (mi_cmd_data_write_memory_bytes): Remove unused r.
2590 * python/py-gdb-readline.c (gdbpy_readline_wrapper): Remove unused
2592 * python/python.c (_initialize_python): Remove unused cmd_name, cmd.
2593 * tui/tui-disasm.c (tui_set_disassem_content): Remove unused
2596 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2598 * dwarf2-frame.c (dwarf2_compile_cfa_to_ax): Remove unused num_regs.
2599 * symtab.c (iterate_over_symtabs): Remove unused s.
2600 (find_pc_sect_symtab): Remove unused pspAce.
2601 (find_pc_sect_line): Remove unused alt_symtab.
2602 (find_pcs_for_symtab_line): Remove unused ix, previous_function.
2603 (completion_list_add_name): Remove unused newsize.
2605 2013-01-31 Tom Tromey <tromey@redhat.com>
2608 * dwarf2read.c (read_tag_ptr_to_member_type): Handle
2611 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2613 * target.c (target_read_string): Remove unused origlen.
2615 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2617 * auto-load.c (auto_load_expand_dir_vars): Remove unused dir_vec.
2618 * ax-gdb.c (gen_printf): Remove unused expr, i, bot, fr, flen, fmt.
2619 * ax-general.c (ax_print): Remove unused is_float.
2620 * blockframe.c (block_innermost_frame): Remove unused start, end.
2621 * break-catch-sig.c (catch_signal_command): Remove unused gdbarch.
2623 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2625 * solib-svr4.c (svr4_keep_data_in_core): Remove unused lmo.
2626 (svr4_read_so_list): Remove unused lmo.
2627 * solib-target.c (solib_target_relocate_section_addresses): Remove
2630 2013-01-30 Tom Tromey <tromey@redhat.com>
2632 * hppa-tdep.c (read_unwind_info): Use SECT_OFF_TEXT, not "0".
2634 2013-01-30 Tom Tromey <tromey@redhat.com>
2636 * symfile.c (get_file_crc): Use bfd_calc_gnu_debuglink_crc32.
2637 * utils.c (gnu_debuglink_crc32): Remove.
2638 * utils.h (gnu_debuglink_crc32): Don't declare.
2640 2013-01-30 Tom Tromey <tromey@redhat.com>
2642 * dwarf2read.c (compute_delayed_physnames, read_call_site_scope)
2643 (read_structure_type, read_enumeration_type): Remove cast.
2645 2013-01-30 Tom Tromey <tromey@redhat.com>
2647 * dwarf2read.c (read_namespace_type): Remove cast.
2648 (read_typedef): Likewise.
2650 2013-01-29 Tom Tromey <tromey@redhat.com>
2652 * dwarf2read.c (free_dwo_file): Remove assert.
2654 2013-01-29 Tom Tromey <tromey@redhat.com>
2656 * value.c (deprecated_set_value_modifiable): Remove.
2657 * value.h (deprecated_set_value_modifiable): Remove.
2659 2013-01-28 Doug Evans <dje@google.com>
2661 * dwarf2loc.c (dwarf2_find_location_expression): Don't add base address
2662 to addresses from dwo files.
2664 2013-01-25 Siva Chandra Reddy <sivachandra@google.com>
2666 * valops.c (find_overload_match): Remove unused argument 'lax'.
2667 * value.h: Remove unused argument 'lax' from the declaration of
2668 find_overload_match.
2669 * eval.c (value_subexp_standard): Do not pass a 'lax' argument
2670 to find_overload_match.
2671 * valarith.c (value_user_defined_cpp_op): Do not pass a 'lax'
2672 argument to find_overload_match.
2674 2013-01-25 Tom Tromey <tromey@redhat.com>
2676 * dwarf2read.c (processing_has_namespace_info): Remove.
2677 (struct dwarf2_cu) <processing_has_namespace_info>: New field.
2678 (process_die, read_func_scope, dwarf2_start_symtab)
2679 (new_symbol_full): Update.
2681 2013-01-25 Tom Tromey <tromey@redhat.com>
2683 * cp-namespace.c (cp_set_block_scope): Remove.
2684 * cp-support.h (cp_set_block_scope): Remove.
2685 * dbxread.c: Include block.h.
2686 (cp_set_block_scope): New function.
2687 (process_one_symbol): Update.
2688 * dwarf2read.c (read_func_scope): Use block_set_scope.
2690 2013-01-25 Pedro Alves <palves@redhat.com>
2692 * remote.c (add_current_inferior_and_thread): Tweak comment.
2694 2013-01-25 Tom Tromey <tromey@redhat.com>
2696 * cp-namespace.c (cp_scan_for_anonymous_namespaces): Update.
2697 (cp_add_using_directive): Add 'copy_names' argument.
2698 * cp-support.h (cp_add_using_directive): Update.
2699 (struct using_direct) <import_src, import_dest, alias,
2700 declaration>: Now const.
2701 * dwarf2read.c (read_import_statement): Use obconcat.
2702 Don't copy names passed to cp_add_using_directive.
2704 2013-01-25 Tom Tromey <tromey@redhat.com>
2706 * c-exp.y (qualified_name): Use TYPE_SAFE_NAME.
2708 2013-01-25 Pedro Alves <palves@redhat.com>
2710 * remote.c (stop_reply_extract_thread): New.
2711 (add_current_inferior_and_thread): New parameter 'wait_status'.
2713 (remote_start_remote): Pass wait status to
2714 add_current_inferior_and_thread.
2715 (extended_remote_run): Update comment.
2716 (extended_remote_create_inferior_1): Pass wait status to
2717 add_current_inferior_and_thread.
2719 2013-01-25 Andrew Burgess <aburgess@broadcom.com>
2720 Ulrich Weigand <uweigand@de.ibm.com>
2722 * valarith.c (value_vector_widen): New function for replicating a
2723 scalar into a vector.
2724 (value_binop): Use value_vector_widen to widen scalar to vector
2725 rather than casting, this better matches gcc C behaviour.
2726 * valops.c (value_casst): Update logic for casting between vector
2727 types, and for casting from scalar to vector, try to match gcc C
2729 * value.h (value_vector_widen): Declare.
2730 * opencl-lang.c (opencl_value_cast): New opencl specific casting
2731 function, handle special case for casting scalar to vector.
2732 (opencl_relop): Use opencl_value_cast.
2733 (evaluate_subexp_opencl): Use opencl_value_cast instead of
2734 value_cast, and handle BINOP_ASSIGN, UNOP_CAST, and UNOP_CAST_TYPE
2735 in order to use opencl_value_cast.
2737 2013-01-25 Yao Qi <yao@codesourcery.com>
2739 * event-loop.c: Include "queue.h".
2740 (gdb_event_p): New typedef.
2741 (DECLARE_QUEUE_P): Use.
2742 (DEFINE_QUEUE_P): Use.
2743 (async_queue_event): Remove.
2744 (gdb_event_xfree): New.
2745 (initialize_event_loop): New.
2746 (process_event): Use QUEUE macros.
2747 (event_queue): Remove.
2748 (gdb_wait_for_event): Caller update.
2749 (check_async_event_handlers): Likewise.
2750 (poll_timers): Likewise.
2751 * event-loop.h (initialize_event_loop): Declare.
2752 * event-loop.c (gdb_event_xfree): New.
2753 * top.c (gdb_init): Call initialize_event_loop.
2755 2013-01-25 Yao Qi <yao@codesourcery.com>
2757 * event-loop.c (async_queue_event): Remove one parameter
2758 'position'. Remove code handling 'position' == TAIL.
2759 (gdb_wait_for_event): Caller update.
2760 (check_async_event_handlers): Caller update.
2761 (poll_timers): Caller update.
2762 * event-loop.h (enum queue_position): Remove.
2764 2013-01-25 Maxim Kuvyrkov <maxim@kugelworks.com>
2766 * MAINTAINERS: Update my email.
2768 2013-01-25 Yao Qi <yao@codesourcery.com>
2770 * main.c (print_gdb_help): Remove "--epoch" from the help
2773 2013-01-24 Ulrich Weigand <uweigand@de.ibm.com>
2775 * symtab.c (skip_prologue_using_sal): Consider a file
2776 change the same as an increased line number
2778 2013-01-24 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
2780 * MAINTAINERS (Write After Approval): Add myself to the list.
2782 2013-01-24 Tom Tromey <tromey@redhat.com>
2784 * ada-lang.h (ada_decode_symbol): Make return type const.
2785 * ada-lang.c (ada_decode_symbol): Likewise.
2787 2013-01-23 Doug Evans <dje@google.com>
2789 * linespec.c (find_linespec_symbols): Make static.
2791 2013-01-23 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
2793 * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value): Set correct
2794 type on float conversion for complex type.
2796 2013-01-23 Siva Chandra Reddy <sivachandra@google.com>
2798 Add a new class gdb.Architecture which exposes GDB's
2799 internal representation of architecture via GDB Python API.
2800 * Makefile.in: Add entries corresponding to the new file
2802 * NEWS (Python Scripting): Add entries for the new class
2803 gdb.Architecture and the new method gdb.Frame.architecture.
2804 * python/py-arch.c: Implement gdb.Architecture class.
2805 * python/py-frame.c (frapy_arch): Implement the method
2806 gdb.Frame.architecture().
2807 (frame_object_methods): Add 'architecture' to the method table.
2808 * python/python-internal.h: Add declarations of new utility
2810 * python/python.c (_initialize_python): Initialize
2811 gdb.Architecture class.
2813 2013-01-23 Doug Evans <dje@google.com>
2815 Work around binutils/15021.
2816 * dwarf2read.c (dwarf2_per_cu_data): Split imported_symtabs and
2817 type_unit_group out of union s. All uses updated.
2818 (read_index_from_section): Watch for index version 8.
2819 (follow_die_sig): If using .gdb_index version <= 7, record the TU as
2821 (write_psymtabs_to_index): Increment version number to 8.
2823 2013-01-22 Pedro Alves <palves@redhat.com>
2825 * annotate.c (breakpoint_changed): Skip if breakpoint is not
2828 2013-01-22 Pedro Alves <palves@redhat.com>
2830 * annotate.c (annotate_breakpoints_changed): Rename to ...
2831 (annotate_breakpoints_invalid): ... this. Make static.
2832 (breakpoint_changed): Adjust.
2833 (_initialize_annotate): Always install the observers. Install a
2834 "breakpoint_created" observer.
2835 * annotate.h (annotate_breakpoints_changed): Delete declaration.
2836 * breakpoint.c (set_breakpoint_condition)
2837 (breakpoint_set_commands, do_map_commands_command)
2838 (init_raw_breakpoint, clear_command, set_ignore_count)
2839 (enable_breakpoint_disp): No longer call
2840 annotate_breakpoints_changed.
2842 2013-01-22 Pedro Alves <palves@redhat.com>
2844 * annotate.c: Include "inferior.h".
2845 (frames_invalid_emitted)
2846 (breakpoints_invalid_emitted): New globals.
2847 (async_background_execution_p): New function.
2848 (annotate_breakpoints_changed, annotate_frames_invalid): Skip
2849 emitting the annotation if it has already been emitted.
2850 (annotate_display_prompt): New function.
2851 * annotate.h (annotate_display_prompt): New declaration.
2852 * event-top.c: Include annotate.h.
2853 (display_gdb_prompt): Call annotate_display_prompt.
2855 2013-01-22 Pedro Alves <palves@redhat.com>
2857 * annotate.c (ignore_count_changed): Delete.
2858 (annotate_breakpoints_changed): Don't clear ignore_count_changed.
2859 (annotate_ignore_count_change): Delete.
2860 (annotate_stopped): Don't emit a delayed breakpoints-changed
2862 * annotate.h (annotate_ignore_count_change): Delete.
2863 * breakpoint.c (bpstat_check_breakpoint_conditions): Don't call
2864 annotate_ignore_count_change.
2866 2013-01-22 Tom Tromey <tromey@redhat.com>
2868 * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>: Only
2869 require_rvalue for a register location.
2871 2013-01-21 Marc Khouzam <marc.khouzam@ericsson.com>
2873 * breakpoint.c (print_one_breakpoint_location): Add MI
2874 field 'thread-groups' when printing a breakpoint.
2875 (output_thread_groups): New function.
2877 2013-01-21 Siva Chandra Reddy <sivachandra@google.com>
2879 * python/lib/gdb/commands/explore.py
2880 (CompoundExplorer.explore_expr): Correct the name of a method
2882 (ExploreTypeCommand.invoke): Add a missing 'return'.
2884 2013-01-21 Tom Tromey <tromey@redhat.com>
2886 * gdb_obstack.h (obconcat): Move declaration here, from...
2887 * symfile.h (obconcat): ... here.
2888 * gdb_obstack.c: New file.
2889 (obconcat): Move from...
2890 * symfile.c (obconcat): ... here.
2891 * Makefile.in (SFILES): Add gdb_obstack.c.
2892 (COMMON_OBS): Add gdb_obstack.o.
2894 2013-01-21 Tom Tromey <tromey@redhat.com>
2896 * symfile.h (obsavestring): Don't declare.
2897 * symfile.c (obsavestring): Remove.
2898 * ada-exp.y: Use obstack_copy0, not obsavestring.
2899 * ada-lang.c: Use obstack_copy0, not obsavestring.
2900 * coffread.c: Use obstack_copy0, not obsavestring.
2901 * cp-namespace.c: Use obstack_copy0, not obsavestring.
2902 * dbxread.c: Use obstack_copy0, not obsavestring.
2903 * dwarf2read.c: Use obstack_copy0, not obsavestring.
2904 * jit.c: Use obstack_copy0, not obsavestring.
2905 * mdebugread.c: Use obstack_copy0, not obsavestring.
2906 * psymtab.c: Use obstack_copy0, not obsavestring.
2907 * stabsread.c: Use obstack_copy0, not obsavestring.
2908 * xcoffread.c: Use obstack_copy0, not obsavestring.
2910 2013-01-21 Tom Tromey <tromey@redhat.com>
2912 * dwarf2read.c (fixup_go_packaging): Save package name
2914 * gdbtypes.c (init_type): Don't copy name.
2916 2013-01-21 Tom Tromey <tromey@redhat.com>
2918 * dwarf2read.c (struct partial_die_info) <name, scope>: Now
2920 (struct attribute) <u.str>: Now const.
2921 (struct fnfieldlist) <name>: Now const.
2922 (dw2_get_file_names_reader, init_cutu_and_read_dies): Update.
2923 (partial_die_parent_scope): Make return type const.
2924 (partial_die_full_name, add_partial_symbol): Update.
2925 (dwarf2_compute_name, dwarf2_full_name, dwarf2_physname): Make
2927 (find_file_and_directory): Make 'name' and 'comp_dir' const.
2928 (read_file_scope, read_func_scope, dwarf2_add_field)
2929 (dwarf2_add_member_fn, read_structure_type)
2930 (process_enumeration_scope, read_array_type, read_module_type)
2931 (read_base_type, read_subrange_type): Update.
2932 (dwarf2_start_symtab): Make 'name' and 'comp_dir' const.
2933 (new_symbol_full, guess_full_die_structure_name): Update.
2934 (dwarf2_canonicalize_name): Return const type. Make 'name' const.
2935 (dwarf2_name): Return const type.
2936 (dwarf_decode_macro_bytes, dwarf_decode_macros): Make 'comp_dir'
2939 2013-01-21 Tom Tromey <tromey@redhat.com>
2941 * gdbtypes.c (init_type): Make 'name' const.
2942 * gdbtypes.h (init_type): Update.
2944 2013-01-21 Tom Tromey <tromey@redhat.com>
2946 * buildsym.c (patch_subfile_names): Use set_last_source_file.
2947 (start_symtab): Make 'name' and 'dirname' const. Use
2948 set_last_source_file.
2949 (restart_symtab, reset_symtab_globals): Use set_last_source_file.
2950 (last_source_file): Define. Now static.
2951 (set_last_source_file, get_last_source_file): New functions.
2952 * buildsym.h (last_source_file): Don't declare.
2953 (start_symtab): Update.
2954 (set_last_source_file, get_last_source_file): Declare.
2955 * coffread.c (complete_symtab): Use set_last_source_file.
2956 (coff_end_symtab): Likewise.
2957 (coff_symtab_read): Use set_last_source_file, get_last_source_file.
2958 * dbxread.c (read_dbx_symtab, read_ofile_symtab): Use
2959 set_last_source_file.
2960 (process_one_symbol): Use get_last_source_file.
2961 * mdebugread.c (parse_partial_symbols): Use set_last_source_file.
2962 (psymtab_to_symtab_1): Use get_last_source_file.
2963 * xcoffread.c (process_linenos): Use get_last_source_file.
2964 (complete_symtab): Use set_last_source_file.
2965 (read_xcoff_symtab): Use set_last_source_file, get_last_source_file.
2966 (scan_xcoff_symtab): Use set_last_source_file.
2968 2013-01-21 Tom Tromey <tromey@redhat.com>
2970 * symtab.c (struct demangled_name_entry) <mangled>: Now const.
2971 (symbol_set_names): Remove casts. Handle field const-ness.
2973 2013-01-21 Tom Tromey <tromey@redhat.com>
2975 * dwarf2read.c (new_symbol_full): Remove cast.
2976 * symtab.c (symbol_set_demangled_name): Make 'name' const.
2977 * symtab.h (symbol_set_demangled_name): Update.
2979 2013-01-21 Tom Tromey <tromey@redhat.com>
2981 * main.c (captured_main): Call bfd_init.
2983 2013-01-21 Tom Tromey <tromey@redhat.com>
2985 * gnu-v2-abi.c (_initialize_gnu_v2_abi): Don't set default ABI.
2986 * gnu-v3-abi.c (_initialize_gnu_v3_abi): Set default ABI.
2987 * minsyms.c (install_minimal_symbols): Don't check for _Z symbols.
2990 2013-01-21 Jan Kratochvil <jan.kratochvil@redhat.com>
2992 * symmisc.c (maintenance_print_msymbols): Check also ST_DEV.
2994 2013-01-21 Jan Kratochvil <jan.kratochvil@redhat.com>
2996 Fix gdb.fortran/common-block.exp crash in PIE mode.
2997 * dwarf2read.c (new_symbol_full) <DW_TAG_common_block>: Use
2999 * f-valprint.c (info_common_command_for_block): Expect
3000 LOC_COMMON_BLOCK in gdb_assert.
3001 * symtab.h (struct general_symbol_info): Update comment for the
3002 common_block member.
3003 (domain_enum): Extend comment for the COMMON_BLOCK_DOMAIN member.
3004 (enum address_class): New member LOC_COMMON_BLOCK.
3006 2013-01-18 David Blaikie <dblaikie@gmail.com>
3008 * MAINTAINERS (Write After Approval): Add "David Blaikie".
3010 2013-01-18 Tom Tromey <tromey@redhat.com>
3013 * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>:
3014 Call require_rvalue.
3016 2013-01-18 Yao Qi <yao@codesourcery.com>
3018 * dbxread.c (dbx_psymtab_to_symtab): Delete the declaration.
3019 (dbx_read_symtab): New declaration.
3020 (dbx_psymtab_to_symtab): Delete.
3021 (dbx_read_symtab): Rename from dbx_psymtab_to_symtab.
3022 Rename parameter PST to SELF. Exchanged two parameters.
3023 (start_psymtab): Caller update.
3024 * dwarf2read.c (dwarf2_psymtab_to_symtab): Delete the declaration.
3025 (dwarf2_read_symtab): New declaration.
3026 (dwarf2_psymtab_to_symtab): Delete.
3027 (dwarf2_read_symtab): Rename from dwarf2_psymtab_to_symtab.
3028 Rename parameter PST to SELF. Exchanged two parameters.
3029 (create_partial_symtab): Caller update.
3030 * mdebugread.c (mdebug_psymtab_to_symtab): Delete.
3031 (mdebug_read_symtab): Rename from mdebug_psymtab_to_symtab.
3032 Rename parameter PST to SELF. Exchanged two parameters.
3033 (parse_partial_symbols, new_psymtab): Caller update.
3034 * psympriv.h (struct partial_symtab) <read_symtab>: Exchange
3036 * psymtab.c (psymtab_to_symtab): Caller update.
3037 * xcoffread.c (xcoff_psymtab_to_symtab): Delete.
3038 (xcoff_read_symtab): Rename from xcoff_psymtab_to_symtab.
3039 Rename parameter PST to SELF. Exchanged two parameters.
3040 (xcoff_start_psymtab): Caller update.
3042 2013-01-18 Yao Qi <yao@codesourcery.com>
3044 * infrun.c (proceed): Rename local variable 'oneproc' to
3047 2013-01-17 Doug Evans <dje@google.com>
3049 * dwarf2read.c (dw2_build_type_unit_groups_reader): Delete.
3050 (dw2_build_type_unit_groups): Delete. All uses updated.
3052 * symtab.h (struct symbol_search): Add comment.
3054 2013-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
3056 * symtab.c (compare_filenames_for_search): New comment for
3059 2013-01-17 Tom Tromey <tromey@redhat.com>
3061 * cp-abi.c (cp_abi_completer): Fix typo in assignment.
3063 2013-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
3065 * symtab.c (iterate_over_some_symtabs): New variable cleanups,
3066 initialize it by existing make_cleanup. Call new do_cleanups.
3068 2013-01-17 Tom Tromey <tromey@redhat.com>
3070 * cp-abi.c (cp_abi_completer): New function.
3071 (_initialize_cp_abi): Set completer for "set cp-abi".
3073 2013-01-17 Tom Tromey <tromey@redhat.com>
3075 * mem-break.c: Remove obsolete comment.
3076 * bfin-tdep.c (bfin_breakpoint_from_pc): Fix comment.
3078 2012-01-17 Sanjoy Das <sanjoy@playingwithpointers.com>
3080 * jit.c (jit_reader_load_command): Interpret the jit reader name
3081 as an absolute path if it begins with a forward slash.
3083 2012-01-17 Sanjoy Das <sanjoy@playingwithpointers.com>
3087 * jit.c (finalize_symtab): Ensure that only the global block has a
3090 2013-01-17 Pedro Alves <palves@redhat.com>
3092 * acinclude.m4: Include ../config/plugins.m4,
3093 ../config/largefile.m4 and ../config/lead-dot.m4. Add comments.
3094 * Makefile.in (aclocal_m4_deps): Update.
3095 * aclocal.m4: Renegerate.
3097 2013-01-16 Doug Evans <dje@google.com>
3099 * contrib/cc-with-tweaks.sh: Add references to Fission docs.
3101 2013-01-16 Pedro Alves <palves@redhat.com>
3102 Tom Tromey <tromey@redhat.com>
3105 * NEWS: Add "catch signal".
3106 * breakpoint.c (base_breakpoint_ops): No longer static.
3107 (bpstat_explains_signal): New function.
3108 (init_catchpoint): No longer static.
3109 (base_breakpoint_explains_signal): New function.
3110 (base_breakpoint_ops): Initialize new field.
3111 * breakpoint.h (enum bpstat_signal_value): New.
3112 (struct breakpoint_ops) <explains_signal>: New field.
3113 (bpstat_explains_signal): Remove macro, declare as function.
3114 (base_breakpoint_ops, init_catchpoint): Declare.
3115 * break-catch-sig.c: New file.
3116 * inferior.h (signal_catch_update): Declare.
3117 * infrun.c (signal_catch): New global.
3118 (handle_syscall_event): Update for change to
3119 bpstat_explains_signal.
3120 (handle_inferior_event): Likewise. Always handle random signals
3122 (signal_cache_update): Check signal_catch.
3123 (signal_catch_update): New function.
3124 (_initialize_infrun): Initialize signal_catch.
3125 * Makefile.in (SFILES): Add break-catch-sig.c.
3126 (COMMON_OBS): Add break-catch-sig.o.
3128 2013-01-16 Tom Tromey <tromey@redhat.com>
3130 * breakpoint.c (print_one_catch_fork, print_one_catch_vfork)
3131 (print_one_catch_solib, print_one_catch_syscall)
3132 (print_one_catch_exec, print_one_exception_catchpoint): Emit
3135 2013-01-16 Yao Qi <yao@codesourcery.com>
3137 * printcmd.c (current_display_number): Make it static.
3139 2013-01-16 Yao Qi <yao@codesourcery.com>
3141 * infcmd.c (step_once): Don't check '!single_inst' as it was
3144 2013-01-15 Jan Kratochvil <jan.kratochvil@redhat.com>
3146 * dwarf2read.c (psymtab_include_file_name): Extend the function comment.
3148 2013-01-14 Tom Tromey <tromey@redhat.com>
3150 * cli/cli-decode.c (add_setshow_string_noescape_cmd): Return the
3152 * command.h (add_setshow_string_noescape_cmd): Update.
3153 * corefile.c (set_gnutarget_command): Remove trailing whitespace.
3154 (complete_set_gnutarget): New function.
3155 (_initialize_core): Set the "set gnutarget" completer.
3157 2013-01-14 Tom Tromey <tromey@redhat.com>
3160 * c-typeprint.c (cp_type_print_method_args): Handle 'restrict'.
3161 (c_type_print_modifier): Likewise.
3162 * dwarf2read.c (read_tag_restrict_type): New function.
3163 (read_type_die_1): Handle DW_TAG_restrict_type.
3164 * gdbtypes.c (make_restrict_type): New function.
3165 (recursive_dump_type): Handle TYPE_RESTRICT.
3166 * gdbtypes.h (enum type_flag_values): Renumber.
3167 (enum type_instance_flag_value): Add
3168 TYPE_INSTANCE_FLAG_RESTRICT.
3169 (TYPE_RESTRICT): New macro.
3170 (make_restrict_type): Declare.
3172 2013-01-14 Tom Tromey <tromey@redhat.com>
3175 * psymtab.c (struct psymtab_state): New.
3176 (discard_psymtabs_upto, make_cleanup_discard_psymtabs): New
3178 * psympriv.h (make_cleanup_discard_psymtabs): Declare.
3179 * dwarf2read.c (dwarf2_build_psymtabs): Catch exceptions.
3181 2013-01-14 Richard Sharman <richard_sharman@mitel.com>
3182 Pedro Alves <palves@redhat.com>
3186 * remote.c (remote_threads_info): Make a copy of the reply from
3187 qfThreadInfo and use that instead of rs->buf.
3189 2013-01-14 Yao Qi <yao@codesourcery.com>
3191 * dbxread.c (dbx_psymtab_to_symtab_1): Don't check PST is NULL.
3192 (dbx_psymtab_to_symtab): Likewise.
3193 * dwarf2read.c (dwarf2_psymtab_to_symtab): Likewise.
3194 * mdebugread.c (mdebug_psymtab_to_symtab): Likewise.
3195 * xcoffread.c (xcoff_psymtab_to_symtab_1): Likewise.
3197 2013-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
3199 * parse.c (parse_exp_in_context): New variable inner_chain. Call
3200 make_cleanup_restore_current_language. Call set_language. Move
3201 OLD_CHAIN and INNER_CHAIN cleanups.
3202 * utils.c (do_restore_current_language)
3203 (make_cleanup_restore_current_language): New functions.
3204 * utils.h (make_cleanup_restore_current_language): New declaration.
3206 2013-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
3208 * source.c (symtab_to_fullname): Apply rewrite_source_path also for
3211 * source.c (symtab_to_fullname): Do not prepend DIRNAME for
3212 non-existing files if FILENAME is already absolute.
3214 2013-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3216 * macrocmd.c (macro_inform_no_debuginfo): Use puts_filtered instead of
3217 fputs_filtered. Append trailing newline.
3219 2013-01-11 Yao Qi <yao@codesourcery.com>
3220 Stan Shebs <stan@codesourcery.com>
3222 * psymtab.c (init_psymbol_list): Clarify the comment.
3224 2013-01-11 Yao Qi <yao@codesourcery.com>
3226 * breakpoint.c (print_one_breakpoint_location): Remove dead code.
3227 (update_dprintf_command_list): Assert that 'printf_line' is
3228 non-null. Remove condition check.
3230 2013-01-10 Jan Kratochvil <jan.kratochvil@redhat.com>
3233 * psymtab.c (psymtab_to_fullname, psymtab_to_fullname): Make the return
3235 * tui/tui-source.c (tui_source_is_displayed): Make the parameter fname
3237 * tui/tui-source.h (tui_source_is_displayed): Likewise.
3239 2013-01-09 Anthony Green <green@moxielogic.com>
3241 * cp-abi.c (cplus_print_vtable): Don't return value from void
3243 * ada-lang.c (re_set_catch_assert): Ditto.
3245 2013-01-09 Doug Evans <dje@google.com>
3247 * symfile.h (quick_symbol_functions): Delete member
3248 pre_expand_symtabs_matching. All uses removed.
3249 * dwarf2read.c (dw2_lookup_symbol): Implement.
3250 (dw2_do_expand_symtabs_matching): Delete.
3251 (dw2_pre_expand_symtabs_matching): Delete.
3252 (struct dw2_symtab_iterator): New type.
3253 (dw2_symtab_iter_init, dw2_symtab_iter_next): New functions.
3254 (dw2_expand_symtabs_for_function): Rewrite.
3255 (dwarf2_gdb_index_functions): Update.
3256 * psymtab.c (pre_expand_symtabs_matching_psymtabs): Delete.
3257 (psym_functions): Update.
3259 2013-01-09 Tom Tromey <tromey@redhat.com>
3261 * config/pa/hpux.mh (NATDEPFILES): Remove somread.o.
3262 * configure: Rebuild.
3263 * configure.ac: Add somread.o to the build if BFD has SOM
3265 * somread.c: Include som/aout.h, not syms.h.
3266 (som_symtab_read): Use som_external_symbol_dictionary_record.
3267 Unpack records manually.
3268 (_initialize_somread): Declare.
3270 2012-01-08 Mike Frysinger <vapier@gentoo.org>
3272 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx) [__x86_64__]:
3273 Cast return_address to 64bits.
3275 2013-01-08 Hui Zhu <hui_zhu@mentor.com>
3277 * printcmd.c: Remove define of function output_command.
3278 * tracepoint.c: Remove extern of function output_command.
3279 * valprint.h: (output_command): New extern.
3281 2013-01-07 Tom Tromey <tromey@redhat.com>
3283 * objc-lang.c (objc_emit_char, objc_printchar, objc_printstr):
3285 (objc_language_defn): Use c_printchar, c_printstr,
3288 2013-01-07 Tom Tromey <tromey@redhat.com>
3292 * ada-valprint.c (printstr, print_field_values): Remove
3294 * cp-valprint.c (cp_print_value_fields): Remove "inspect_it"
3296 * jv-valprint.c (java_print_value_fields): Remove "inspect_it"
3298 * m2-lang.c (m2_printstr): Remove "inspect_it" code.
3299 * main.c (captured_main): Remove "epoch" argument.
3300 * objc-lang.c (objc_printstr): Remove "inspect_it" code.
3301 * p-lang.c (pascal_printstr): Remove "inspect_it" code.
3302 * p-valprint.c (pascal_object_print_value_fields): Remove
3304 * printcmd.c (print_command_1): Remove 'inspect' argument.
3305 (print_command, call_command): Update.
3306 (inspect_command): Remove.
3307 (_initialize_printcmd): Make "inspect" an alias for "print".
3308 * top.c (epoch_interface): Remove.
3309 * top.h (epoch_interface): Remove.
3310 * valprint.c (user_print_options): Update.
3311 (print_converted_chars_to_obstack): Remove "inspect_it" code.
3312 * valprint.h (struct value_print_options) <inspect_it>: Remove
3315 2013-01-04 Tom Tromey <tromey@redhat.com>
3317 * valprint.h (read_string): Add 'extern'.
3319 2013-01-07 Joel Brobecker <brobecker@adacore.com>
3321 * darwin-nat.c: Fix typo in TASK_DYLD_INFO_COUNT macro test
3322 used to decide whether to define darwin_read_dyld_info or not.
3324 2013-01-03 Pierre Muller <muller@sourceware.org>
3326 * main.c (relocate_gdb_directory): Avoid calling stat function
3329 2013-01-03 Yao Qi <yao@codesourcery.com>
3331 * psymtab.c (fixup_psymbol_section): Update declaration.
3332 (fixup_psymbol_section): Remove code returning value.
3334 2013-01-03 Yao Qi <yao@codesourcery.com>
3336 * symtab.h: Remove some out of date comments.
3337 (enum exception_event_kind): Move it ...
3338 * breakpoint.c: ... here.
3340 2013-01-02 Iain Sandoe <developer@sandoe-acoustics.co.uk>
3343 * darwin-nat.c (darwin_read_dyld_info): Only build if
3344 TASK_DYLD_INFO_COUNT is defined.
3345 (darwin_xfer_partial): Call darwin_read_dyld_info only if
3346 TASK_DYLD_INFO_COUNT is defined.
3348 2013-01-02 Tom Tromey <tromey@redhat.com>
3350 * symfile.h (struct ecoff_debug_hack): Remove.
3351 * objfiles.c: Don't include mdebugread.h.
3353 2013-01-02 Tom Tromey <tromey@redhat.com>
3355 * config/i386/darwin.mh (NATDEPFILES): Remove machoread.o.
3356 * configure.ac: Check for Mach-O support in BFD. Update
3358 * configure: Rebuild.
3360 2013-01-02 Tom Tromey <tromey@redhat.com>
3362 * acinclude.m4 (GDB_AC_CHECK_BFD): New macro.
3363 * configure.ac: Use GDB_AC_CHECK_BFD.
3364 * configure: Rebuild.
3366 2013-01-01 Maxim Kuvyrkov <maxim.kuvyrkov@gmail.com>
3368 * MAINTAINERS: Update my email.
3370 2013-01-01 Joel Brobecker <brobecker@adacore.com>
3372 * cli/cli-script.h (make_cleanup_free_command_lines): Make extern.
3374 2013-01-01 Joel Brobecker <brobecker@adacore.com>
3376 * rs6000-nat.c (bss_data_overlap): New function.
3377 (vmap_symtab): Use it to adjust the .bss section's offset.
3379 2013-01-01 Joel Brobecker <brobecker@adacore.com>
3381 Update year range in copyright notice of all files.
3383 2013-01-01, 13 Joel Brobecker <brobecker@adacore.com>
3385 * top.c (print_gdb_version): Update copyright year.
3387 For older changes see ChangeLog-2012.
3393 version-control: never
projects / external / binutils.git / blob