1 2013-10-23 Pedro Alves <palves@redhat.com>
3 * common/gdb_signals.h (gdb_signal_to_symbol_string): Declare.
4 * common/signals.c: Include "gdb_assert.h".
5 (signals): New field 'symbol'.
6 (SET): Use the 'symbol' parameter.
7 (gdb_signal_to_symbol_string): New function.
8 * infrun.c (handle_inferior_event) <random signal>: In debug
9 output, print the random signal enum as string in addition to its
11 * target/waitstatus.c (target_waitstatus_to_string): Print the
12 signal's enum value as string instead of the (POSIX) signal name.
14 2013-10-23 Gary Benson <gbenson@redhat.com>
17 * common/linux-osdata.c (command_from_pid): Reduced size of cmd
18 from 32 to 18. Adjusted fscanf format string accordingly.
19 (Avoids leaving cmd unterminated.)
20 (print_sockets): Do not parse tlen, inode, sl, timeout, txq, rxq,
21 trun, retn or extra. (Avoids leaving extra unterminated.) Check
22 that local_address and remote_address will not overflow.
23 (linux_xfer_osdata_modules): Parse lines using strtok to avoid
24 leaving dependencies unterminated. Parse size as "%u" to match
27 2013-10-22 Pedro Alves <palves@redhat.com>
29 * infrun.c (handle_inferior_event) <thread hop>: Don't clear or
30 set ecs->random signal.
32 2013-10-22 Pedro Alves <palves@redhat.com>
34 * infrun.c (keep_going): Update comments.
36 2013-10-22 Pedro Alves <palves@redhat.com>
38 * remote.c (remote_parse_stop_reply) <'T'/'S'/'X' replies>: Map
39 invalid signal numbers to GDB_SIGNAL_UNKNOWN.
41 2013-10-22 Pedro Alves <palves@redhat.com>
43 * include/gdb/signals.def (TARGET_EXC_BAD_ACCESS): Rename to
45 (TARGET_EXC_BAD_INSTRUCTION): Rename to GDB_EXC_BAD_INSTRUCTION.
46 (TARGET_EXC_ARITHMETIC): Rename to GDB_EXC_ARITHMETIC.
47 (TARGET_EXC_EMULATION): Rename to GDB_EXC_EMULATION.
48 (TARGET_EXC_SOFTWARE): Rename to GDB_EXC_SOFTWARE.
49 (TARGET_EXC_BREAKPOINT): Rename to GDB_EXC_BREAKPOINT.
50 (GDB_SIGNAL_LAST): Change description string.
51 * common/signals.c (gdb_signal_from_host, do_gdb_signal_to_host):
52 Adjust to signal renaming.
53 * darwin-nat.c (darwin_decode_message): Likewise.
55 2013-10-22 Jose E. Marchesi <jose.marchesi@oracle.com>
57 * MAINTAINERS (Write After Approval): Add myself to the list.
59 2013-10-18 Andrew Burgess <aburgess@broadcom.com>
61 * breakpoint.c (update_watchpoint): If hardware watchpoints are
62 forced off, downgrade them to software watchpoints if possible,
63 and error out if not possible.
64 (watch_command_1): Move watchpoint type selection closer to
65 watchpoint creation, and extend the comments.
67 2013-10-18 Pedro Alves <palves@redhat.com>
70 * infrun.c (handle_inferior_event): Keep going if we got a random
71 signal we should not stop for, instead of falling through to the
74 2013-10-18 Yao Qi <yao@codesourcery.com>
76 * c-varobj.c (cplus_number_of_children): Fix indentation.
78 2013-10-17 Tom Tromey <tromey@redhat.com>
81 * printcmd.c (printcmd): Call gdb_flush.
83 2013-10-17 Tom Tromey <tromey@redhat.com>
85 * elfread.c (struct elfinfo) <stabindexsect>: Remove.
86 (elf_locate_sections): Update.
88 2013-10-17 Yao Qi <yao@codesourcery.com>
90 * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
91 * ada-varobj.c: Remove the include of ada-varobj.h.
92 (ada_varobj_get_number_of_children): Declare.
93 (ada_varobj_get_name_of_child): Make it static.
94 (ada_varobj_get_path_expr_of_child): Likewise.
95 (ada_varobj_get_value_of_child): Likewise.
96 (ada_varobj_get_type_of_child): Likewise.
97 (ada_varobj_get_value_of_array_variable): Likewise.
98 * ada-varobj.h: Remove.
100 2013-10-17 Yao Qi <yao@codesourcery.com>
102 * Makefile.in (SFILES): Add c-varobj.c and jv-varobj.c.
103 (COMMON_OBS): Add c-varobj.o and jv-varobj.o.
104 * ada-varobj.c: Include "varobj.h".
105 (ada_number_of_children): New. Moved from varobj.c.
106 (ada_name_of_variable, ada_name_of_child): Likewise.
107 (ada_path_expr_of_child, ada_value_of_child): Likewise.
108 (ada_type_of_child, ada_value_of_variable): Likewise.
109 (ada_value_is_changeable_p, ada_value_has_mutated): Likewise.
110 (ada_varobj_ops): New.
111 * c-varobj.c, jv-varobj.c: New file. Moved from varobj.c.
112 * gdbtypes.c (get_target_type): New. Moved from varobj.c.
113 * gdbtypes.h (get_target_type): Declare.
114 * varobj.c: Remove the inclusion of "ada-varobj.h" and
116 (ANONYMOUS_STRUCT_NAME): Move it to c-varobj.c.
117 (ANONYMOUS_UNION_NAME): Likewise.
118 (get_type, get_value_type, get_target_type): Remove declarations.
119 (value_get_print_value, varobj_value_get_print_value): Likewise.
120 (c_number_of_children, c_name_of_variable): Likewise.
121 (c_name_of_child, c_path_expr_of_child): Likewise.
122 (c_value_of_child, c_type_of_child): Likewise.
123 (c_value_of_variable, cplus_number_of_children): Likewise.
124 (cplus_class_num_children, cplus_name_of_variable): Likewise.
125 (cplus_name_of_child, cplus_path_expr_of_child): Likewise.
126 (cplus_value_of_child, cplus_type_of_child): Likewise.
127 (cplus_value_of_variable, java_number_of_children): Likewise.
128 (java_name_of_variable, java_name_of_child): Likewise.
129 (java_path_expr_of_child, java_value_of_child): Likewise.
130 (java_type_of_child, java_value_of_variable): Likewise.
131 (ada_number_of_children, ada_name_of_variable): Likewise.
132 (ada_name_of_child, ada_path_expr_of_child): Likewise.
133 (ada_value_of_child, ada_type_of_child): Likewise.
134 (ada_value_of_variable, ada_value_is_changeable_p): Likewise.
135 (ada_value_has_mutated): Likewise.
136 (struct language_specific): Move it to varobj.h.
137 (CPLUS_FAKE_CHILD): Move it to varobj.h.
138 (restrict_range): Rename it varobj_restrict_range. Make it extern.
140 (get_path_expr_parent): Rename it to varobj_get_path_expr_parent.
142 (is_anonymous_child): Move it to c-varobj.c and rename to
143 varobj_is_anonymous_child. Caller update.
144 (get_type): Move it to c-varobj.c.
145 (get_value_type): Rename it varobj_get_value_type. Make it
147 (get_target_type): Move it gdbtypes.c.
148 (varobj_formatted_print_options): New function.
149 (value_get_print_value): Rename it to
150 varobj_value_get_print_value and make it extern.
151 (varobj_value_is_changeable_p): Make it extern.
152 (adjust_value_for_child_access): Move it to c-varobj.c.
153 (default_value_is_changeable_p): Rename it to
154 varobj_default_value_is_changeable_p. Make it extern.
155 (c_number_of_children, c_name_of_variable): Move it to c-varobj.c
156 (c_name_of_child, c_path_expr_of_child): Likewise.
157 (c_value_of_child, c_type_of_child): Likewise.
158 (c_value_of_variable, cplus_number_of_children): Likewise.
159 (cplus_class_num_children, cplus_name_of_variable): Likewise.
160 (cplus_name_of_child, cplus_path_expr_of_child): Likewise.
161 (cplus_value_of_child, cplus_type_of_child): Likewise.
162 (cplus_value_of_variable): Likewise.
163 (java_number_of_children, java_name_of_variable): Move it to jv-varobj.c.
164 (java_name_of_child, java_path_expr_of_child): Likewise.
165 (java_value_of_child, java_type_of_child): Likewise.
166 (java_value_of_variable): Likewise.
167 (ada_number_of_children, ada_name_of_variable): Move it to ada-varobj.c.
168 (ada_name_of_child, ada_path_expr_of_child): Likewise.
169 (ada_value_of_child, ada_type_of_child): Likewise.
170 (ada_value_of_variable, ada_value_is_changeable_p): Likewise.
171 (ada_value_has_mutated): Likewise.
172 * varobj.h (CPLUS_FAKE_CHILD): New macro, moved from varobj.c.
173 (struct lang_varobj_ops): New. Renamed by 'struct language_specific'.
174 (c_varobj_ops, cplus_varobj_ops): Declare.
175 (java_varobj_ops, ada_varobj_ops): Declare.
176 (varobj_default_value_is_changeable_p): Declare.
177 (varobj_value_is_changeable_p): Declare.
178 (varobj_get_value_type, varobj_is_anonymous_child): Declare.
179 (varobj_get_path_expr_parent): Declare.
180 (varobj_value_get_print_value): Declare.
181 (varobj_formatted_print_options): Declare.
182 (varobj_restrict_range): Declare.
184 2013-10-17 Luis Machado <lgustavo@codesourcery.com>
186 * target/waitstatus.h (target_waitkind): Remove spurious
187 character from the comments.
189 2013-10-17 Joel Brobecker <brobecker@adacore.com>
191 * gdbarch.sh (get_longjmp_target): Add method documentation.
192 * gdbarch.h: Regenerate.
194 2013-10-16 Tom Tromey <tromey@redhat.com>
196 * dbxread.c (read_dbx_symtab) <bss_ext_symbol>: Remove unused
199 2013-10-16 Luis Machado <lgustavo@codesourcery.com>
201 * gcore.in: Call GDB using the full path to the gcore script.
202 Error out if the GDB binary is not found.
204 2013-10-16 Sergio Durigan Junior <sergiodj@redhat.com>
207 * dwarf2read.c (dw2_get_real_path): Remove unnecessary call to
210 2013-10-16 Sergio Durigan Junior <sergiodj@redhat.com>
213 * target.c (target_disable_btrace): Fix invalid return value for
215 (target_teardown_btrace): Likewise.
217 2013-10-14 Yao Qi <yao@codesourcery.com>
219 * varobj.c (struct varobj): Move most of the fields to
221 (struct varobj_dynamic): New struct.
222 (varobj_get_display_hint) [HAVE_PYTHON]: Adjust.
223 (varobj_has_more): Likewise.
224 (dynamic_varobj_has_child_method): Likewise.
225 (update_dynamic_varobj_children): Likewise.
226 (varobj_get_num_children): Likewise.
227 (varobj_list_children, varobj_pretty_printed_p): Likewise.
228 (install_new_value_visualizer): Likewise.
229 (install_new_value_visualizer, install_new_value): Likewise.
230 (varobj_update, new_variable, free_variable): Likewise.
231 (my_value_of_variable, value_get_print_value): Likewise.
232 (install_visualizer): Change the type of parameter 'var' to
233 'struct varobjd_dynamic *'. Callers update.
234 * varobj.h (struct varobj): Moved from varobj.c.
235 (struct varobj) <dynamic>: New field.
237 2013-10-13 Sandra Loosemore <sandra@codesourcery.com>
239 * nios2-tdep.c (nios2_reg_names): Use "sstatus" rather than "ba"
240 as the preferred name of r30.
241 * nios2-linux-tdep.c (reg_offsets): Likewise.
242 * features/nios2-cpu.xml: Likewise.
243 * features/nios2-linux.c: Regenerated.
244 * features/nios2.c: Regenerated.
245 * regformats/nios2-linux.dat: Regenerated.
247 2013-10-13 Jan Kratochvil <jan.kratochvil@redhat.com>
249 Canonicalize directories for EXEC_FILENAME.
250 * exec.c (exec_file_attach): Use gdb_realpath_keepfile for
252 * utils.c (gdb_realpath_keepfile): New function.
253 * utils.h (gdb_realpath_keepfile): New declaration.
255 2013-10-11 Doug Evans <dje@google.com>
257 * Makefile.in (GDBFLAGS): New variable.
260 2013-10-11 Joel Brobecker <brobecker@adacore.com>
262 * NEWS: Add entry documenting the new "-catch-assert" and
263 "-catch-exception" GDB/MI commands.
265 2013-10-11 Joel Brobecker <brobecker@adacore.com>
267 * breakpoint.h (init_ada_exception_breakpoint): Add parameter
269 * breakpoint.c (init_ada_exception_breakpoint): Add parameter
270 "enabled". Set B->ENABLE_STATE accordingly.
271 * ada-lang.h (ada_exception_catchpoint_kind): Move here from
273 (create_ada_exception_catchpoint): Add declaration.
274 * ada-lang.c (ada_exception_catchpoint_kind): Move to ada-lang.h.
275 (create_ada_exception_catchpoint): Make non-static. Add new
276 parameter "disabled". Use it in call to
277 init_ada_exception_breakpoint.
278 (catch_ada_exception_command): Add parameter "enabled" in call
279 to create_ada_exception_catchpoint.
280 (catch_assert_command): Likewise.
282 * mi/mi-cmds.h (mi_cmd_catch_assert, mi_cmd_catch_exception):
284 * mi/mi-cmds.c (mi_cmds): Add the "catch-assert" and
285 "catch-exception" commands.
286 * mi/mi-cmd-catch.c: Add #include "ada-lang.h".
287 (mi_cmd_catch_assert, mi_cmd_catch_exception): New functions.
289 2013-10-11 Joel Brobecker <brobecker@adacore.com>
291 * ada-lang.c (enum ada_exception_catchpoint_kind): Renames
292 "enum exception_catchpoint_kind". Replace the "ex_" prefix
293 of all its enumerates with "ada_". Update the rest of this
296 2013-10-11 Joel Brobecker <brobecker@adacore.com>
298 * ada-lang.c (ada_decode_exception_location): Delete.
299 (create_ada_exception_catchpoint): Remove arguments "sal",
300 "addr_string" and "ops". Add argument "ex_kind" instead.
301 Adjust implementation accordingly, calling ada_exception_sal
302 to get the entities it no longer gets passed as arguments.
303 Document the function's arguments.
304 (catch_ada_exception_command): Use catch_ada_exception_command_split
305 instead of ada_decode_exception_location, and update call to
306 create_ada_exception_catchpoint.
307 (catch_ada_assert_command_split): Renames
308 ada_decode_assert_location. Remove parameters "addr_string" and
309 "ops", and now returns void. Adjust implementation accordingly.
310 Update the function documentation.
311 (catch_assert_command): Use catch_ada_assert_command_split
312 instead of ada_decode_assert_location. Update call to
313 create_ada_exception_catchpoint.
315 2013-10-11 Joel Brobecker <brobecker@adacore.com>
317 * utils.h (perror_warning_with_name): Add declaration.
318 * utils.c (perror_warning_with_name): New function.
319 * cli/cli-cmds.c (source_script_with_search): Add call to
320 perror_warning_with_name if from_tty is nul.
322 2013-10-11 Joel Brobecker <brobecker@adacore.com>
324 * utils.c (perror_string): New function, extracted out of
325 throw_perror_with_name.
326 (throw_perror_with_name): Rework to use perror_string.
328 2013-10-11 Yao Qi <yao@codesourcery.com>
330 * remote.c (discard_pending_stop_replies_in_queue): Update
332 (struct stop_reply) <rs>: New field.
333 (remove_stop_reply_of_remote_state): New function.
334 (discard_pending_stop_replies_in_queue): Add parameter 'rs'.
335 Callers update. Pass remove_stop_reply_of_remote_state to
337 (remote_parse_stop_reply): Initialize field 'rs'.
339 2013-10-10 Will Newton <will.newton@linaro.org>
341 * aarch64-linux-tdep.c (aarch64_linux_init_abi): Call
344 2013-10-10 Joel Brobecker <brobecker@adacore.com>
346 * cli/cli-cmds.c (show_baud_rate): Moved to serial.c as
347 serial_baud_show_cmd.
348 (_initialize_cli_cmds): Delete the code creating the
349 "set/show remotebaud" commands.
350 * serial.c (baud_rate): Move here from top.c.
351 (serial_baud_show_cmd): Move here from cli/cli-cmds.c.
352 (_initialize_serial): Create "set/show serial baud" commands.
353 Add "set/show remotebaud" command aliases.
354 * top.c (baud_rate): Moved to serial.c.
355 * NEWS: Document the new "set/show serial baud" commands,
356 replacing "set/show remotebaud".
358 2013-10-09 Pedro Alves <palves@redhat.com>
360 * breakpoint.c (insert_bp_location): Use memory_error_message to
361 build the memory error string.
362 * c-lang.c: Include "gdbcore.h".
363 (c_get_string): Use memory_error to throw error.
364 (target_xfer_memory_error): Delete.
365 (memory_error_message): New, factored out from
366 target_xfer_memory_error.
367 (memory_error): Change parameter type to target_xfer_error.
369 (read_memory): Use memory_error instead of
370 target_xfer_memory_error.
371 * gdbcore.h: Include "target.h".
372 (memory_error): Change parameter type to target_xfer_error.
373 (memory_error_message): Declare function.
374 * target.c (target_read_memory, target_read_stack)
375 (target_write_memory, target_write_raw_memory): Return
376 TARGET_XFER_E_IO on error. Adjust comments.
377 (get_target_memory): Pass TARGET_XFER_E_IO to memory_error,
379 * target.h (target_read, target_insert_breakpoint)
380 (target_remove_breakpoint): Adjust comments.
381 * valprint.c (partial_memory_read): Rename parameter, and adjust
383 (val_print_string): Use memory_error_message to build the memory
386 2013-10-09 Jan Kratochvil <jan.kratochvil@redhat.com>
388 * common/filestuff.c (gdb_fopen_cloexec): Remove initialization of
389 result variable. Rename variable fopen_e_ever_failed to
390 fopen_e_ever_failed_einval. Retry fopen only for errno EINVAL.
392 2013-10-09 Pedro Alves <palves@redhat.com>
394 * monitor.c (monitor_write_memory, monitor_write_memory_bytes)
395 (monitor_write_memory_longlongs, monitor_write_memory_block):
396 Constify 'myaddr' parameter.
397 (monitor_xfer_memory): Adjust interface as monitor_xfer_partial
399 (monitor_xfer_partial): New function.
400 (init_base_monitor_ops): Don't install a deprecated_xfer_memory
401 hook. Install a to_xfer_partial hook.
403 2013-10-09 Tom Tromey <tromey@redhat.com>
405 * dwarf2read.c (dwarf2_get_dwz_file): Update for type change in
406 bfd_get_alt_debug_link_info.
408 2013-10-09 Jan Kratochvil <jan.kratochvil@redhat.com>
410 New flag OBJF_NOT_FILENAME.
411 * auto-load.c (auto_load_objfile_script): Check also OBJF_NOT_FILENAME.
412 * jit.c (jit_object_close_impl): Use OBJF_NOT_FILENAME for
414 (jit_bfd_try_read_symtab): Use OBJF_NOT_FILENAME for
415 symbol_file_add_from_bfd.
416 * jv-lang.c (get_dynamics_objfile): Use OBJF_NOT_FILENAME for
418 * objfiles.c (allocate_objfile): Assert OBJF_NOT_FILENAME if NAME is
420 * objfiles.h (OBJF_NOT_FILENAME): New.
422 2013-10-08 Tom Tromey <tromey@redhat.com>
424 * Makefile.in (SFILES): Add build-id.c.
425 (HFILES_NO_SRCDIR): Add build-id.h.
426 * build-id.c: New file, largely from elfread.c. Modified
428 * build-id.h: New file.
429 * dwarf2read.c (dwarf2_get_dwz_file): Update for change to
430 bfd_get_alt_debug_link_info. Verify dwz file's build-id.
431 Search for dwz file using build-id.
432 * elfread.c (build_id_bfd_get, build_id_verify)
433 (build_id_to_debug_filename, find_separate_debug_file): Remove.
435 2013-10-08 Joel Brobecker <brobecker@adacore.com>
437 * ada-lang.c (compare_names_with_case): Renamed from
438 compare_names, adding a new parameter "casing" and its handling.
439 New function documentation.
440 (compare_names): New function, implemented using
441 compare_names_with_case.
443 2013-10-08 Joel Brobecker <brobecker@adacore.com>
445 * ada-lang.c (ada_exception_sal): Remove advance declaration.
447 2013-10-07 Tom Tromey <tromey@redhat.com>
449 * objfiles.c (free_objfile_per_bfd_storage): Delete the
450 demangled_names_hash.
451 (free_objfile): Don't delete the demangled_names_hash.
452 * objfiles.h (struct objfile_per_bfd_storage)
453 <demangled_names_hash>: New field.
454 (struct objfile) <demangled_names_hash>: Move to
455 objfile_per_bfd_storage.
456 * symfile.c (reread_symbols): Don't delete the
457 demangled_names_hash.
458 * symtab.c (create_demangled_names_hash): Update.
459 (symbol_set_names): Update.
461 2013-10-07 Tom Tromey <tromey@redhat.com>
463 * gdb_bfd.c (struct gdb_bfd_data) <relocation_computed,
464 needs_relocations>: New fields.
465 (gdb_bfd_requires_relocations): New function.
466 * gdb_bfd.h (gdb_bfd_requires_relocations): Declare.
467 * objfiles.c (get_objfile_bfd_data): Disallow sharing if
468 the BFD needs relocations applied.
470 2013-10-07 Pedro Alves <palves@redhat.com>
473 * breakpoint.c (remove_threaded_breakpoints): Say "no longer in
474 the thread list" instead of "gone".
476 2013-10-06 Sergio Durigan Junior <sergiodj@redhat.com>
478 * NEWS: Mention new convenience variable $_exitsignal.
479 * corelow.c (core_open): Reset exit convenience variables. Set
480 $_exitsignal to the uncaught signal which generated the corefile.
481 * infrun.c (handle_inferior_event): Reset exit convenience
482 variables. Set $_exitsignal for TARGET_WAITKIND_SIGNALLED.
483 (clear_exit_convenience_vars): New function.
484 * inferior.h (clear_exit_convenience_vars): New prototype.
486 2013-10-06 Yao Qi <yao@codesourcery.com>
488 * varobj.h: Add comments to enum varobj_languages.
490 2013-10-04 Doug Evans <dje@google.com>
492 Add support for DWP file format version 2.
493 * NEWS: Mention support for DWP file format version 2.
494 * dwarf2read.c (dwarf2_section_info): Convert asection field to a
495 union of asection, containing_section. New fields virtual_offset
496 and is_virtual. Change type of readin filed from int to char.
497 (dwo_sections, dwo_file): Tweak comments.
498 (dwp_v2_section_ids): New enum.
499 (dwp_sections): New fields abbrev, info, line, loc, macinfo, macro,
501 (virtual_v1_dwo_sections): Renamed from virtual_dwo_sections.
503 (virtual_v2_dwo_sections): New struct.
504 (dwp_hash_table): New fields version, nr_columns. Change type of
505 section_pool field to a union.
506 (dwp_file): New field version.
507 (dwarf2_has_info): Check for virtual sections.
508 (get_containing_section): New function.
509 (get_section_bfd_owner, get_section_bfd_section): Call it.
510 (dwarf2_locate_sections): Update.
511 (dwarf2_section_empty_p): Update.
512 (dwarf2_read_section): Handle virtual sections.
513 (locate_dwz_sections): Update.
514 (create_dwp_hash_table): Document and handle V2 format.
515 (locate_v1_virtual_dwo_sections): Renamed from
516 locate_virtual_dwo_sections and update. All callers updated.
517 (create_dwo_unit_in_dwp_v1): Renamed from create_dwo_in_dwp.
518 Delete arg htab. Rename arg section_index to unit_index.
520 (MAX_NR_V1_DWO_SECTIONS): Renamed from MAX_NR_DWO_SECTIONS.
522 (create_dwp_v2_section, create_dwo_unit_in_dwp_v2): New functions.
523 (lookup_dwo_unit_in_dwp): Add V2 support.
524 (dwarf2_locate_dwo_sections): Update.
525 (dwarf2_locate_common_dwp_sections): Renamed from
526 dwarf2_locate_dwp_sections and update. All callers updated.
527 (dwarf2_locate_v2_dwp_sections): New function.
528 (open_and_init_dwp_file): Add V2 support.
529 (read_str_index): New locals str_section, str_offsets_section.
531 2013-10-04 Pedro Alves <palves@redhat.com>
533 * common/ptid.c (null_ptid, minus_one_ptid, ptid_build)
534 (pid_to_ptid, ptid_get_pid, ptid_get_lwp, ptid_get_tid)
535 (ptid_equal, ptid_is_pid, ptid_lwp_p, ptid_tid_p): Replace
536 describing comments with references to ptid.h.
537 * common/ptid.h: Remove intro description of constructors,
538 accessors and predicates.
539 (struct ptid): Reformat.
540 (minus_one_ptid, ptid_build, pid_to_ptid, ptid_get_pid)
541 (ptid_get_lwp, ptid_get_tid, ptid_equal, ptid_is_pid): Change
544 2013-10-04 Joel Brobecker <brobecker@adacore.com>
546 * aix-thread.c (sync_threadlists): Add missing ')' in call
549 2013-10-04 Joel Brobecker <brobecker@adacore.com>
551 * procfs.c (procfs_init_inferior): Fix typo causing the build
554 2013-10-04 Joel Brobecker <brobecker@adacore.com>
556 * aix-thread.c (ptrace32): Remove cast to addr_ptr.
558 2013-10-04 Joel Brobecker <brobecker@adacore.com>
560 * mi/mi-main.c (run_one_inferior): Add function description.
561 Make ARG a pointer to an integer whose value determines whether
562 we should "run" or "start" the program.
563 (mi_cmd_exec_run): Add handling of the "--start" option.
564 Reject all other command-line options.
565 * NEWS: Add entry for "-exec-run"'s new "--start" option.
567 2013-10-04 Yao Qi <yao@codesourcery.com>
569 * remote-notif.h (REMOTE_NOTIF_ID): New enum.
570 (struct notif_client) <pending_event>: Moved
571 to struct remote_notif_state.
573 (struct remote_notif_state) <pending_event>: New field.
574 (notif_event_xfree): Declare.
575 * remote-notif.c (handle_notification): Adjust.
576 (notif_event_xfree): New function.
577 (do_notif_event_xfree): Call notif_event_xfree.
578 (remote_notif_state_xfree): Call notif_event_xfree to free
579 each element in field pending_event.
580 * remote.c (discard_pending_stop_replies): Remove declaration.
581 (discard_pending_stop_replies_in_queue): Declare.
582 (remote_close): Call discard_pending_stop_replies_in_queue
583 instead of discard_pending_stop_replies.
584 (remote_start_remote): Adjust.
585 (stop_reply_xfree): Call notif_event_xfree.
586 (notif_client_stop): Adjust initialization.
587 (remote_notif_remove_all): Rename it to ...
588 (remove_stop_reply_for_inferior): ... this. Update comments.
589 Don't check INF is NULL.
590 (discard_pending_stop_replies): Return early if notif_state is
591 NULL. Adjust. Don't check INF is NULL.
592 (remote_notif_get_pending_events): Adjust.
593 (discard_pending_stop_replies_in_queue): New function.
594 (remote_wait_ns): Likewise.
596 2013-10-04 Yao Qi <yao@codesourcery.com>
598 * remote-notif.c (DECLARE_QUEUE_P): Remove.
599 (notif_queue): Remove.
600 (remote_notif_process): Add one parameter 'notif_queue'.
601 Update comments. Callers update.
602 (remote_async_get_pending_events_token): Remove.
603 (remote_notif_register_async_event_handler): Remove.
604 (remote_notif_unregister_async_event_handler): Remove.
605 (handle_notification): Add parameter 'notif_queue'. Update
606 comments. Callers update.
607 (notif_xfree): Remove.
608 (remote_notif_state_allocate): New function.
609 (remote_notif_state_xfree): New function.
610 (_initialize_notif): Remove code to allocate queue.
611 * remote-notif.h (DECLARE_QUEUE_P): Moved from remote-notif.c.
612 (struct remote_notif_state): New.
613 (handle_notification): Update declaration.
614 (remote_notif_process): Likewise.
615 (remote_notif_register_async_event_handler): Remove.
616 (remote_notif_unregister_async_event_handler): Remove.
617 (remote_notif_state_allocate): Declare.
618 (remote_notif_state_xfree): Declare.
619 * remote.c (struct remote_state) <notif_state>: New field.
620 (remote_close): Don't call
621 remote_notif_unregister_async_event_handler. Call
622 remote_notif_state_xfree.
623 (remote_open_1): Don't call
624 remote_notif_register_async_event_handler. Call
625 remote_notif_state_allocate.
627 2013-10-04 Yao Qi <yao@codesourcery.com>
629 * varobj.c (create_child_with_value): Remove 'const' from the
630 type of parameter 'name'.
631 (varobj_add_child): Likewise.
632 (install_dynamic_child): Remove 'const' from the type of
634 (varobj_add_child): Likewise.
635 (create_child_with_value): Likewise. Update comments. Don't
637 (update_dynamic_varobj_children): Duplicate 'name'
638 and pass it to install_dynamic_child.
640 2013-10-03 Phil Muldoon <pmuldoon@redhat.com>
642 * python/py-value.c (convert_value_from_python): Move PyInt_Check
643 conversion logic to occur after PyLong_Check. Comment on order
645 * python/py-arch.c (archpy_disassemble): Comment on order of
646 conversion for integers and longs.
648 2013-10-03 Pedro Alves <palves@redhat.com>
650 * common/linux-ptrace.c (linux_check_ptrace_features): Factor out
651 the PTRACE_O_TRACESYSGOOD and PTRACE_O_TRACEFORK to separate
652 functions. Always test for PTRACE_O_TRACESYSGOOD even if
653 PTRACE_O_TRACEFORK is not supported.
654 (linux_test_for_tracesysgood): New function.
655 (linux_test_for_tracefork): New function, factored out from
656 linux_check_ptrace_features, and also don't kill child_pid here.
658 2013-10-03 Tristan Gingold <gingold@adacore.com>
660 * i386-darwin-nat.c (i386_darwin_dr_set): Fix argument type.
661 Remove verbose error reporting. Use detected state to
662 thread_set_state call.
663 (i386_darwin_dr_get): Fix return type. Remove verbose error
665 Remove trailing spaces.
667 2013-10-02 Pedro Alves <palves@redhat.com>
669 * cp-valprint.c (cp_print_value_fields): Adjust calls to
670 val_print_optimized_out.
671 * jv-valprint.c (java_print_value_fields): Likewise.
672 * p-valprint.c (pascal_object_print_value_fields): Likewise.
673 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full)
674 <DWARF_VALUE_REGISTER>: If the register was not saved, return a
675 new optimized out value.
676 * findvar.c (address_from_register): Likewise.
677 * frame.c (put_frame_register): Tweak error string to say the
678 register was not saved, rather than optimized out.
679 * infcmd.c (default_print_one_register_info): Adjust call to
680 val_print_optimized_out. Use value_of_register instead of
681 get_frame_register_value.
682 * mi/mi-main.c (output_register): Use value_of_register instead of
683 get_frame_register_value.
684 * valprint.c (valprint_check_validity): Likewise.
685 (val_print_optimized_out): New value parameter. If the value is
686 lval_register, print <not saved> instead.
687 (value_check_printable, val_print_scalar_formatted): Adjust calls
688 to val_print_optimized_out.
689 * valprint.h (val_print_optimized_out): New value parameter.
690 * value.c (struct value) <optimized_out>: Extend comment.
691 (error_value_optimized_out): New function.
692 (require_not_optimized_out): Use it. Use a different string for
693 lval_register values.
694 * value.h (error_value_optimized_out): New declaration.
695 * NEWS: Mention <not saved>.
697 2013-10-02 Joel Brobecker <brobecker@adacore.com>
699 * symtab.c (compare_search_syms): Use FILENAME_CMP instead of
700 strcmp to compare two symtab filenames.
702 2013-10-02 Joel Brobecker <brobecker@adacore.com>
704 * symtab.c (search_symbols_equal): Delete.
705 (sort_search_symbols_remove_dups): Replace call to
706 search_symbols_equal by call to compare_search_syms,
707 adjusting as necessary.
709 2013-10-02 Phil Muldoon <pmuldoon@redhat.com>
713 * python/python.c: Document gdb.execute command in Python help.
715 2013-10-02 Phil Muldoon <pmuldoon@redhat.com>
717 * python/py-frame.c (frame_info_to_frame_object): Use
718 gdbpy_convert_exception. Clean up Python object on failure.
720 2013-10-02 Phil Muldoon <pmuldoon@redhat.com>
722 * python/lib/gdb/command/frame_filters.py
723 (InfoFrameFilter.list_frame_filters): Retrieve exception manually.
724 (ShowFrameFilterPriority.invoke): Ditto.
726 2013-10-01 Keith Seitz <keiths@redhat.com>
728 * linespec.c (struct ls_parser): Make 'saved_arg' const.
729 (parse_linespec): Make 'argptr' const.
730 Remove temporary cast of 'argptr' to const char **.
731 (decode_line_full): Pass const pointer to parse_linespec.
732 (decode_line_1): Likewise.
733 (decode_objc): Make local variable 'new_argptr' const.
734 (find_function_symbols): Remove temporary cast to char *
736 * objc-lang.c (find_imps): Make argument 'method' const.
738 * objc-lang.h (find_imps): Likewise.
740 2013-10-01 Keith Seitz <keiths@redhat.com>
742 * completer.c (skip_quoted_chars): Make all arguments const.
744 (skip_quoted): Likewise.
745 * completer.h (skip_quoted_chars): Likewise.
746 (skip_quoted): Likewise.
747 * defs.h (skip_quoted): Remove duplicate declaration.
748 * jv-exp.y: Include completer.h.
749 (yylex): Remove unneccessary cast to char * fro skip_quoted.
750 * p-exp.y: Include completer.h.
752 2013-10-01 Keith Seitz <keiths@redhat.com>
754 * c-exp.y (parse_number): Make first argument const.
755 Make a copy of the input to manipulate.
756 (c_parse_escape): Make first argument const.
757 Make local variable 'tokptr' const.
758 (parse_string_or_char): Make first two arguments const.
759 (macro_original_text): Make const.
760 (lex_one_token): Make local variable 'tokstart' const.
761 Likewise for local variables named 'p'.
762 Cast away const for struct stoken (temporary).
763 * c-lang.h (c_parse_escpae): Make first argument const.
764 * cli/cli-cmds.c (echo_command): Make local variable 'p'
766 * cli/cli-setshow.c (do_set_command): Likewise for 'p' in
768 * f-exp.y (parse_number): Make first argument const.
769 (match_string_literal): Make local variable 'tokstart'
771 (yylex): Make local variable 'p' const.
772 Cast away const for struct stoken (temporary).
773 * go-exp.y (parse_number): Make first argument const.
774 (parse_string_or_char): Likewise.
775 Make local variable 'tokstart' const.
776 (lex_one_token): Likewise for numerous locals called 'p'.
777 Cast away const for struct stoken (temporary).
778 * jv-exp.y (parse_number): Make first argument const.
779 Make local variables 'tokstart' and 'tokptr' const.
780 Cast away const for call to skip_quoted (temporary).
781 (yylex): Make local variable 'p' const.
782 Cast away const for struct stoken (temporary).
783 * m2-exp.y (parse_number): Make local variable 'p' const.
784 (yylex): Likewise for 'tokstart'.
785 Cast away const for struct stoken (temporary).
786 Make local variable 'p' const.
787 * macroexp.c (get_character_constant): Pass a const string
789 (get_string_literal): Likewise.
790 (macro_expand_next): Make first argument const.
791 Cast away const for init_shared_buffer.
792 * macroexp.h (macro_expand_next): Make first argument const.
793 * p-exp.y (yylex): Make a local copy of 'lexptr'.
794 Pass a const string to c_parse_escape.
795 Make local variables 'p' and 'namestart' const.
796 * parse.c (lexptr): Make const.
797 (prev_lexptr): Likewise.
798 (find_template_name_end): Return const.
799 Make argument const, too.
800 (parse_exp_in_context): Make first argument const.
801 Remove the entire const_hack.
802 (parse_exp_in_context_1): Make first argument const.
803 * parser-defs.h (find_template_name_end): Return const.
804 Make argument const, too.
805 (lexptr): Make const.
806 (prev_lexptr): Likewise.
807 * utils.c (parse_escape): Make second argument const.
808 * utils.h (parse_escape): Likewise.
810 2013-10-01 Keith Seitz <keiths@redhat.com>
812 * ada-exp.y (write_object_renaming): Update: struct stoken.ptr
814 (block_lookup): Make 'raw_name' and 'name' const.
815 * ada-lex.l (processString): Update for struct stoken.ptr.
816 * c-exp.y (qualified_name : TYPENAME COLONCOLON '~' name): Likewise.
817 (operator_stoken): Likewise.
818 (lex_one_token): Remove temporary cast to char * for
820 * f-exp.y (yylex): Likewise.
821 * gdb-types.c (lookup_struct_elt_type): Make argument 'name' const.
822 * gdbtypes.h (lookup_struct_elt_type): Likewisee.
823 * go-exp.y (lex_one_token): Remove temporary cast to char * for
825 * jv-exp.y (QualifiedName): Update for struct stoken.ptr.
826 (yylex): Remove temporary cast to char * for 'yylval.sval.ptr'.
827 * linespec.c (struct ls_parser): Make 'stream' const.
828 (find_parameter_list_end): Make argument 'input' and local
830 (linespec_lexer_lex_string): Make local variables 'start' and
832 Use skip_spaces_const instead of skip_spaces.
833 (linespec_lexer_peek_token): Make local variable 'saved_stream'
835 (parse_linespec): Temporarily cast 'argptr' to const for
836 'parser->lexer.stream'.
837 * m2-exp.y (yylex): Remove temporary cast to char * for
839 * objc-lang.c (add_msglist): Make local variable 'p' const.
840 * p-exp.y (exp : exp '['): Update for struct stoken.ptr.
841 (exp : STRING): Make 'sp' const.
842 (parse_number): Make argument 'p' const.
843 * parser-defs.h (struct stoken): Make 'ptr' const.
845 2013-10-01 Doug Evans <dje@google.com>
847 * cli/cli-decode.c: Remove unnecessary inclusion of tui/tui.h.
849 2013-10-01 Yao Qi <yao@codesourcery.com>
851 * varobj.c (c_value_of_root): Remove declaration.
852 (cplus_value_of_root, java_value_of_root): Likewise.
853 (ada_value_of_root): Likewise.
854 (struct language_specific) <value_of_root>: Remove.
855 (languages): Update initialization.
856 (check_scope): Move earlier.
857 (c_value_of_root): Move earlier and rename to ...
858 (value_of_root_1): ... this.
859 (value_of_root): Caller update.
860 (cplus_value_of_root, java_value_of_root): Remove.
861 (ada_value_of_root): Remove.
863 2013-10-01 Yao Qi <yao@codesourcery.com>
865 * varobj.c (varobj_format_string): Remove "unknown".
866 (languages): Remove the first element.
867 * varobj.h (enum varobj_languages): Remove vlang_c.
869 2013-10-01 Yao Qi <yao@codesourcery.com>
871 * varobj.c (struct language_specific) <language>: Remove.
872 (languages): Update the initialization.
874 2013-10-01 Yao Qi <yao@codesourcery.com>
876 * arm-wince-tdep.c: Remove inclusion of "solib.h" and
877 "solib-target.h". Include "windows-tdep.h".
878 (arm_wince_init_abi): Call windows_init_abi. Remove call to
879 set_solib_ops and set_gdbarch_has_dos_based_file_system.
880 * configure.tgt (arm*-wince-pe | arm*-*-mingw32ce*): Append
881 windows-tdep.o to gdb_target_obs.
883 2013-10-01 Yao Qi <yao@codesourcery.com>
885 * amd64-windows-tdep.c: Remove inclusion of "solib.h" and
887 (amd64_windows_init_abi): Don't call set_solib_ops and
888 set_gdbarch_iterate_over_objfiles_in_search_order. Call
889 windows_init_abi instead.
890 * i386-cygwin-tdep.c: Remove inclusion of "solib.h" and
892 (i386_cygwin_init_abi): Don't call set_solib_ops,
893 set_gdbarch_has_dos_based_file_system and
894 set_gdbarch_iterate_over_objfiles_in_search_order. Call
895 windows_init_abi instead.
896 * windows-tdep.c: Include "solib.h" and "solib-target.h".
897 (windows_init_abi): New function.
898 (windows_iterate_over_objfiles_in_search_order): Make it
900 * windows-tdep.h (windows_init_abi): Declare.
901 (windows_iterate_over_objfiles_in_search_order): Remove
904 2013-10-01 Jerome Guitton <guitton@adacore.com>
906 Checked in by Joel Brobecker <brobecker@adacore.com>
907 * system-gdbinit/elinos.py (get_elinos_environment): Return an
908 incomplete dictionnary instead of None in case of missing
909 environment variables.
910 (elinos_init): in case of an incomplete environment, best
911 effort to load system libraries instead of abort.
913 2013-10-01 Joel Brobecker <brobecker@adacore.com>
915 * ada-lang.c (ada_has_this_exception_support): Ignore
916 mst_solib_trampoline minimal symbols.
918 2013-09-30 Tristan Gingold <gingold@adacore.com>
920 * i386-darwin-nat.c (darwin_complete_target): Install methods for
922 (i386_darwin_dr_set): Support 32 and 64 bit states.
923 (i386_darwin_dr_get): Likewise.
924 (i386_darwin_dr_set_control): Make static.
925 (i386_darwin_dr_set_addr, i386_darwin_dr_get_addr)
926 (i386_darwin_dr_get_status, i386_darwin_dr_get_control): Likewise.
928 2013-09-30 Luis Machado <lgustavo@codesourcery.com>
930 * aarch64-linux-nat.c: Replace PIDGET with ptid_get_pid.
931 Replace TIDGET with ptid_get_lwp.
932 Replace GET_LWP with ptid_get_lwp.
933 * aix-thread.c (BUILD_THREAD, BUILD_LWP): Remove.
934 Replace BUILD_THREAD with ptid_build.
935 Replace BUILD_LWP with ptid_build.
936 Replace PIDGET with ptid_get_pid.
937 Replace TIDGET with ptid_get_lwp.
938 * alphabsd-nat.c: Replace PIDGET with ptid_get_pid.
939 * amd64-linux-nat.c: Replace PIDGET with ptid_get_pid.
940 Replace TIDGET with ptid_get_lwp.
941 * amd64bsd-nat.c: Replace PIDGET with ptid_get_pid.
942 * arm-linux-nat.c: Replace PIDGET with ptid_get_pid.
943 Replace TIDGET with ptid_get_lwp.
944 Replace GET_LWP with ptid_get_lwp.
945 * armnbsd-nat.c: Replace PIDGET with ptid_get_pid.
947 * breakpoint.c: Likewise.
948 * common/ptid.c (ptid_is_pid): Condense check for
949 null_ptid and minus_one_ptid.
950 (ptid_lwp_p): New function.
951 (ptid_tid_p): New function.
952 * common/ptid.h: Update comments for accessors.
953 (ptid_lwp_p): New prototype.
954 (ptid_tid_p): New prototype.
955 * defs.h (PIDGET, TIDGET, MERGEPID): Do not define.
956 * gcore.c: Replace PIDGET with ptid_get_pid.
957 * gdbthread.h: Likewise.
958 * gnu-nat.c: Likewise.
959 * hppa-linux-nat.c: Replace PIDGET with ptid_get_pid.
960 Replace TIDGET with ptid_get_lwp.
961 * hppabsd-nat.c: Replace PIDGET with ptid_get_pid.
962 * hppanbsd-nat.c: Likewise.
963 * i386-linux-nat.c: Replace PIDGET with ptid_get_pid.
964 Replace TIDGET with ptid_get_lwp.
965 * i386bsd-nat.c: Replace PIDGET with ptid_get_pid.
966 * ia64-linux-nat.c: Replace PIDGET with ptid_get_pid.
967 * infcmd.c: Likewise.
968 * inferior.h: Likewise.
969 * inflow.c: Likewise.
970 * infrun.c: Likewise.
971 * linux-fork.c: Likewise.
972 * linux-nat.c: Replace PIDGET with ptid_get_pid.
973 Replace GET_PID with ptid_get_pid.
974 Replace is_lwp with ptid_lwp_p.
975 Replace GET_LWP with ptid_get_lwp.
976 Replace BUILD_LWP with ptid_build.
978 2013-09-28 Mike Frysinger <vapier@gentoo.org>
980 * common/linux-btrace.c: Move sys/syscall.h out of the
981 HAVE_LINUX_PERF_EVENT_H check and wrap it in HAVE_SYS_SYSCALL_H.
982 Also check for SYS_perf_event_open before attempting to buid.
984 2013-09-27 Doug Evans <dje@google.com>
986 * dwarf2read.c (dwarf2_section_info): Add comment.
987 (dwp_file): Split loaded_cutus into loaded_cus, loaded_tus.
989 (dwarf2_section_empty_p): Rename arg from "info" to "section".
990 (dwarf2_read_section): Delete unused local "header". Add section
991 name to error message.
992 (create_dwo_in_dwp): Tweak comment.
993 (MAX_NR_DWO_SECTIONS): Combine count of .debug_macro + .debug_macinfo.
995 * dwarf2read.c (die_reader_specs): Tweak comment.
996 (get_section_bfd_owner, get_section_bfd_section): New functions.
997 (get_section_name, get_section_file_name): New functions.
998 (get_section_id, get_section_flags): New functions.
999 (*): Use new functions to access section fields.
1001 * dwarf2read.c (struct dwo_file): Add/tweak comments.
1002 (lookup_dwo_unit_in_dwp): Renamed from lookup_dwo_in_dwp. Remove
1003 arg "htab". All callers updated.
1004 (create_debug_types_hash_table): Remove redundant copy of
1006 (create_dwo_in_dwp): Tweak comments.
1007 (read_str_index): Tweak comment. Record dwarf form name in static
1010 2013-09-27 Pedro Alves <palves@redhat.com>
1012 * remote.h (REMOTE_SYSROOT_PREFIX): New define.
1013 (remote_filename_p): Add comment.
1014 * remote.c (remote_filename_p): Adjust to use
1015 REMOTE_SYSROOT_PREFIX.
1016 * solib.c (solib_find): When deciding whether we need to add a
1017 directory separator, check whether the sysroot is "remote:"
1018 instead of checking whether the patch has a drive spec. Add
1021 2013-09-27 Pedro Alves <palves@redhat.com>
1023 * remote.c (struct stop_reply) <solibs_changed, replay_event>:
1025 (remote_parse_stop_reply): Adjust, setting event->ws.kind
1028 2013-09-26 Jan Kratochvil <jan.kratochvil@redhat.com>
1030 Fix set debug frame output.
1031 * frame.c (fprint_frame_type): Add TAILCALL_FRAME entry. Move
1032 SENTINEL_FRAME entry lower to match enum frame_type order.
1034 2013-09-26 Pierre Muller <muller@sourceware.org>
1036 Replace constant values 8 to 15 by AMD64_R8_REGNUM to
1037 AMD64_R15_REGNUM when a register index is expected.
1038 * amd64-windows-tdep.c (amd64_windows_dummy_call_integer_regs):
1039 Substitute in array.
1040 * amd64-tdep.c (amd64_dwarf_regmap): Ditto.
1041 (amd64_push_arguments): Substitute in integer_regnum array.
1043 2013-09-25 Doug Evans <dje@google.com>
1045 * objfiles.c (allocate_objfile): Move comment to better place.
1047 New option "set debug symfile on".
1048 * NEWS: Mention "set debug symfile".
1049 * Makefile.in (SFILES): Add symfile-debug.c.
1050 (COMMON_OBS): Add symfile-debug.o.
1051 * elfread.c (elf_symfile_read): Use objfile_set_sym_fns to set the
1052 objfile's symbol functions.
1053 * objfiles.h (objfile_set_sym_fns): Declare.
1054 * symfile-debug.c: New file.
1055 * symfile.c (syms_from_objfile_1): Use objfile_set_sym_fns to set the
1056 objfile's symbol functions.
1057 (reread_symbols): Ditto.
1059 * symfile.h (struct sym_fns): Delete member "sym_flavour".
1061 (add_symtab_fns): Update prototype.
1062 * symfile.c (sym_fns_ptr): Delete. Replace with ...
1063 (registered_sym_fns): ... this.
1064 (symtab_fns): Update.
1065 (add_symtab_fns): New arg "flavour". All callers updated.
1066 (find_sym_fns): Rewrite to use new sym_fns registry.
1068 * symfile.h (struct sym_fns): Add "objfile" argument to
1069 sym_read_linetable. All uses updated.
1071 * symtab.c (domain_name, search_domain_name): New functions.
1072 * symtab.h (domain_name, search_domain_name): Declare.
1074 * symfile.h (struct quick_symbol_functions): Reorg arg list of
1075 map_matching_symbols so objfile is first. All uses updated.
1076 * dwarf2read.c (dw2_map_matching_symbols): Update signature.
1077 * psymtab.c (map_matching_symbols_psymtab): Update signature.
1079 2013-09-25 Andreas Arnez <arnez@linux.vnet.ibm.com>
1082 * solib-svr4.c (svr4_read_so_list): Skip the vDSO when reading
1085 2013-09-24 Doug Evans <dje@google.com>
1087 * objfiles.c (free_objfile): Move comment.
1089 2013-09-24 Joel Brobecker <brobecker@adacore.com>
1091 * ada-exp.y (string_to_operator): Delete.
1092 (dummy_string_to_ada_operator): Delete.
1094 2013-09-24 Joel Brobecker <brobecker@adacore.com>
1097 * i386-tdep.h (enum amd64_reg_class): New, moved here from
1099 (struct gdbarch_tdep): Add fields call_dummy_num_integer_regs,
1100 call_dummy_integer_regs, and classify.
1101 * amd64-tdep.h (amd64_classify): Add declaration.
1102 * amd64-tdep.c (amd64_dummy_call_integer_regs): New static constant.
1103 (amd64_reg_class): Delete, moved to i386-tdep.h.
1104 (amd64_classify): Make non-static. Move declaration to amd64-tdep.h.
1105 Replace call to amd64_classify by call to tdep->classify.
1106 (amd64_push_arguments): Get the list of registers to use for
1107 passing integer parameters from the gdbarch tdep structure,
1108 rather than using a hardcoded one. Replace calls to amd64_classify
1109 by calls to tdep->classify.
1110 (amd64_push_dummy_call): Get the register number used for
1111 the "hidden" argument from tdep->call_dummy_integer_regs.
1112 (amd64_init_abi): Initialize tdep->call_dummy_num_integer_regs
1113 and tdep->call_dummy_integer_regs. Set tdep->classify.
1115 2013-09-24 Joel Brobecker <brobecker@adacore.com>
1118 * i386-tdep.h (gdbarch_tdep): Add field memory_args_by_pointer.
1119 * amd64-tdep.c (amd64_push_arguments): Add handling of architectures
1120 where tdep->memory_args_by_pointer is non-zero.
1122 2013-09-24 Joel Brobecker <brobecker@adacore.com>
1125 * i386-tdep.h (struct gdbarch_tdep): Add new field
1126 integer_param_regs_saved_in_caller_frame.
1127 * amd64-tdep.c (amd64_push_dummy_call): Allocate some memory on
1128 stack if tdep->integer_param_regs_saved_in_caller_frame is set.
1130 2013-09-24 Joel Brobecker <brobecker@adacore.com>
1132 * amd64-windows-tdep.c: #include "value.h"
1133 (amd64_windows_classify): Delete.
1134 (amd64_windows_passed_by_integer_register)
1135 (amd64_windows_passed_by_xmm_register)
1136 (amd64_windows_passed_by_pointer)
1137 (amd64_windows_adjust_args_passed_by_pointer)
1138 (amd64_windows_store_arg_in_reg, amd64_windows_push_arguments)
1139 (amd64_windows_push_dummy_call): New functions.
1140 (amd64_windows_init_abi): Remove setting of
1141 tdep->call_dummy_num_integer_regs, tdep->call_dummy_integer_regs,
1142 tdep->classify, tdep->memory_args_by_pointer and
1143 tdep->integer_param_regs_saved_in_caller_frame.
1144 Add call to set_gdbarch_push_dummy_call.
1146 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1148 * dwarf2read.c (open_and_init_dwp_file): Try open_dwp_file also with
1149 objfile->original_name.
1151 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1153 Pass down original filename for objfile.
1154 * coffread.c (coff_symfile_read): Update symbol_file_add_separate call.
1155 * elfread.c (elf_symfile_read): Likewise.
1156 * jit.c (jit_object_close_impl): Update allocate_objfile call, no
1157 longer set ORIGINAL_NAME.
1158 (jit_bfd_try_read_symtab): Update symbol_file_add_from_bfd call.
1159 * jv-lang.c (get_dynamics_objfile): Update allocate_objfile call.
1160 * machoread.c (macho_add_oso_symfile): Add parameter name. Update
1161 symbol_file_add_from_bfd call.
1162 (macho_symfile_read_all_oso): Update two macho_add_oso_symfile calls.
1163 (macho_check_dsym): Add parameter filenamep. Change function comment.
1165 (macho_symfile_read): New variable dsym_filename. Update
1166 macho_check_dsym call. Use it for symbol_file_add_separate.
1167 * objfiles.c (allocate_objfile): Add parameter name. New comment for
1168 it. Use it for objfile->original_name.
1169 (objfile_name): Return OBFD's filename, if available.
1170 * objfiles.h (allocate_objfile): Add new parameter name.
1171 * solib.c (solib_read_symbols): Update symbol_file_add_from_bfd call.
1172 * symfile-mem.c (symbol_file_add_from_memory): Update
1173 symbol_file_add_from_bfd call.
1174 * symfile.c (read_symbols): Update symbol_file_add_separate call, new
1176 (symbol_file_add_with_addrs): New parameter name, add function comment
1177 for it. Remove variable name. Update allocate_objfile call.
1178 (symbol_file_add_separate): New parameter name, add function comment
1179 for it. Update symbol_file_add_with_addrs call.
1180 (symbol_file_add_from_bfd): New parameter name. Update
1181 symbol_file_add_with_addrs call.
1182 (symbol_file_add): Update symbol_file_add_from_bfd call.
1183 (reread_symbols): New variable original_name. Save
1184 objfile->original_name by it.
1185 * symfile.h (symbol_file_add_from_bfd, symbol_file_add_separate): Add
1188 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1190 Code cleanup: Add objfile_name accessor function.
1191 * ada-lang.c (is_known_support_routine): Use objfile_name.
1192 * auto-load.c (source_gdb_script_for_objfile)
1193 (auto_load_objfile_script): Likewise.
1194 * coffread.c (coff_symtab_read, read_one_sym): Likewise.
1195 * dbxread.c (dbx_symfile_read): Likewise.
1196 * dwarf2-frame.c (dwarf2_build_frame_info): Likewise.
1197 * dwarf2loc.c (locexpr_describe_location_piece): Likewise.
1198 * dwarf2read.c (dwarf2_get_dwz_file, dwarf2_read_index)
1199 (dw2_symtab_iter_next, dw2_expand_symtabs_matching)
1200 (lookup_dwp_signatured_type, lookup_dwo_unit)
1201 (dwarf2_build_psymtabs_hard, scan_partial_symbols, process_queue)
1202 (fixup_go_packaging, process_imported_unit_die, dwarf2_physname)
1203 (read_import_statement, create_dwo_cu, open_and_init_dwp_file)
1204 (lookup_dwo_cutu, read_call_site_scope, dwarf2_ranges_read)
1205 (dwarf2_record_block_ranges, read_common_block, read_typedef)
1206 (read_subrange_type, load_partial_dies, read_partial_die)
1207 (read_addr_index_1, read_str_index, dwarf_decode_lines_1)
1208 (die_containing_type, build_error_marker_type, lookup_die_type)
1209 (follow_die_ref_or_sig, follow_die_ref, dwarf2_fetch_die_loc_sect_off)
1210 (dwarf2_fetch_constant_bytes, follow_die_sig, get_signatured_type)
1211 (get_DW_AT_signature_type, write_psymtabs_to_index)
1212 (save_gdb_index_command): Likewise.
1213 * elfread.c (find_separate_debug_file_by_buildid, elf_symfile_read):
1215 * expprint.c (dump_subexp_body_standard): Likewise.
1216 * gdbtypes.c (type_name_no_tag_or_error): Likewise.
1217 * jit.c (jit_object_close_impl): Use the objfile field name renamed to
1219 * linux-thread-db.c (try_thread_db_load_from_pdir_1): New variable
1220 obj_name, use objfile_name for it, use the variable.
1221 (try_thread_db_load_from_pdir, has_libpthread, thread_db_new_objfile):
1223 * machoread.c (macho_symtab_read, macho_check_dsym)
1224 (macho_symfile_relocate): Likewise.
1225 * maint.c (maintenance_translate_address): Likewise.
1226 * minidebug.c (find_separate_debug_file_in_section): Likewise.
1227 * minsyms.c (install_minimal_symbols): Likewise.
1228 * objfiles.c (allocate_objfile): Use the objfile field name renamed to
1230 (filter_overlapping_sections): Use objfile_name.
1231 (objfile_name): New function.
1232 * objfiles.h (struct objfile): Rename field name to original_name.
1233 (objfile_name): New prototype.
1234 * printcmd.c (sym_info, address_info): Use objfile_name.
1235 * probe.c (parse_probes, collect_probes, compare_probes)
1236 (info_probes_for_ops): Likewise.
1237 * progspace.c (clone_program_space): Likewise.
1238 * psymtab.c (require_partial_symbols, dump_psymtab, allocate_psymtab)
1239 (maintenance_info_psymtabs): Likewise.
1240 * python/py-auto-load.c (gdbpy_load_auto_script_for_objfile)
1241 (source_section_scripts): Likewise.
1242 * python/py-objfile.c (objfpy_get_filename): Likewise.
1243 * python/py-progspace.c (pspy_get_filename): Likewise.
1244 * solib-aix.c (solib_aix_get_toc_value): Likewise.
1245 * solib-som.c (match_main, som_solib_section_offsets): Likewise.
1246 * solib.c (solib_read_symbols): Likewise.
1247 * stabsread.c (scan_file_globals): Likewise.
1248 * stap-probe.c (handle_stap_probe): Likewise.
1249 * symfile.c (symbol_file_clear, separate_debug_file_exists)
1250 (find_separate_debug_file_by_debuglink): Likewise.
1251 (reread_symbols): Likewise. Use the objfile field name renamed to
1253 (allocate_symtab): Use objfile_name.
1254 * symmisc.c (print_symbol_bcache_statistics, print_objfile_statistics)
1255 (dump_objfile, dump_msymbols, dump_symtab_1)
1256 (maintenance_print_msymbols, maintenance_print_objfiles)
1257 (maintenance_info_symtabs, maintenance_check_symtabs): Likewise.
1258 * target.c (target_translate_tls_address, target_info): Likewise.
1259 * xcoffread.c (xcoff_initial_scan): Make variable name const. Use
1262 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1265 * probe.c (parse_probes): Rename variable objfile_name to
1268 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1270 Remove solib-sunos.c.
1271 * Makefile.in (ALLDEPFILES): Remove solib-sunos.c.
1272 * config/m68k/obsd.mh (NATDEPFILES): Remove solib-sunos.o.
1273 * objfiles.c (rt_common_objfile): Remove.
1274 (free_objfile): Remove rt_common_objfile comparison.
1275 * objfiles.h (rt_common_objfile): Remove.
1276 * solib-sunos.c: Remove.
1277 * symfile.c (reread_symbols): Remove solib-sunos.c comment.
1279 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1281 Remove a.out NetBSD and OpenBSD hosts.
1282 * NEWS (Removed native configurations): New.
1283 * config/arm/nbsdaout.mh: Remove.
1284 * config/i386/nbsdaout.mh: Remove.
1285 * config/i386/obsdaout.mh: Remove.
1286 * config/m68k/nbsdaout.mh: Remove.
1287 * config/sparc/nbsdaout.mh: Remove.
1288 * config/vax/nbsdaout.mh: Remove.
1289 * configure.host (arm*-*-netbsd*, i[34567]86-*-netbsd*)
1290 (i[34567]86-*-openbsd[0-2].*, i[34567]86-*-openbsd3.[0-3])
1291 (m68*-*-netbsd*, sparc-*-netbsd*, vax-*-netbsd*): Add them to obsolete
1293 (arm*-*-netbsd*, i[34567]86-*-netbsd*, i[34567]86-*-openbsd[0-2].*)
1294 (i[34567]86-*-openbsd3.[0-3], m68*-*-netbsd*, sparc-*-netbsdaout*)
1295 (sparc-*-netbsd*, vax-*-netbsd*): Remove.
1297 2013-09-23 Tom Tromey <tromey@redhat.com>
1299 * linespec.c (struct minsym_and_objfile): Remove.
1300 (minsym_and_objfile_d): Remove.
1301 (struct linespec, struct collect_info, linespec_parse_basic)
1302 (convert_linespec_to_sals, linespec_parser_delete, decode_objc)
1303 (compare_msymbols, find_method, find_function_symbols)
1304 (find_linespec_symbols, struct collect_minsyms, compare_msyms)
1305 (add_minsym, search_minsyms_for_name): Update.
1307 2013-09-23 Andrew Burgess <aburgess@broadcom.com>
1309 * regcache.c: Add include of valprint.h.
1310 (dump_endian_bytes): Delete.
1311 (regcache_dump): Use print_hex_chars not dump_endian_bytes.
1313 2013-09-23 Andrew Burgess <aburgess@broadcom.com>
1315 * sh64-tdep.c (sh64_do_fp_register): Use print_hex_chars.
1317 2013-09-19 Pedro Alves <palves@redhat.com>
1319 * breakpoint.c (remove_threaded_breakpoints): Skip non-user
1322 2013-09-19 Pedro Alves <palves@redhat.com>
1323 Thomas Schwinge <thomas@codesourcery.com>
1324 Yue Lu <hacklu.newborn@gmail.com>
1326 * gnu-nat.c (gnu_read_inferior, gnu_write_inferior): Make static.
1327 Take a gdb_byte pointer instead of a char pointer.
1329 * gnu-nat.c (gnu_xfer_memory): Adjust interface as
1330 gnu_xfer_partial helper.
1331 (gnu_xfer_partial): New function.
1332 (gnu_target): Don't install a deprecated_xfer_memory hook.
1333 Install a to_xfer_partial hook.
1335 2013-09-19 Jan Kratochvil <jan.kratochvil@redhat.com>
1338 * main.c (captured_main): Replace catch_command_errors by
1339 catch_command_errors_const. Twice.
1340 * symfile.c (symbol_file_add_main_1): Make args parameter const.
1341 (symbol_file_add): Make name parameter const.
1342 (symbol_file_add_main, symbol_file_add_main_1): Make args parameter const.
1343 (symfile_bfd_open): Make name parameter const, rename it to cname. Add
1344 variable name. Change their usage accordingly.
1345 * symfile.h (symbol_file_add, symfile_bfd_open): Make first parameter
1347 (symbol_file_add_main): Make args parameter const.
1349 2013-09-18 Raunaq Bathija <raunaq12@in.ibm.com>
1350 Ulrich Weigand <uweigand@de.ibm.com>
1352 * xcoffread.c (struct coff_symbol): Use CORE_ADDR as type
1354 (read_xcoff_symtab): Use CORE_ADDR as type of fcn_start_addr.
1356 2013-09-18 Pedro Alves <palves@redhat.com>
1357 Yue Lu <hacklu.newborn@gmail.com>
1359 * gnu-nat.c (inf_validate_procs, gnu_wait, gnu_resume)
1360 (gnu_create_inferior)
1361 (gnu_attach, gnu_thread_alive, gnu_pid_to_str, cur_thread)
1362 (set_sig_thread_cmd): Use the lwpid field of ptids to
1363 store/extract thread ids instead of the tid field.
1364 * i386gnu-nat.c (gnu_fetch_registers): Adjust.
1366 2013-09-18 Andrew Burgess <aburgess@broadcom.com>
1368 * infcmd.c (default_print_one_register_info): Add detection of
1369 optimized out values.
1370 (default_print_registers_info): Switch to using
1371 get_frame_register_value.
1373 2013-09-18 Markus Metzger <markus.t.metzger@intel.com>
1375 * infrun.c (handle_inferior_event): Check if we know the
1376 function start address before setting a resume breakpoint.
1378 2013-09-18 Pedro Alves <palves@redhat.com>
1380 * gnu-nat.c (set_sig_thread_cmd): Compare the thread's ptid to
1381 minus_one_ptid instead of looking at the ptid's tid field and
1382 comparing that to -1.
1384 2013-09-18 Andrew Burgess <aburgess@broadcom.com>
1386 * main.h (get_gdb_program_name): Remove extra whitespace.
1388 2013-09-18 Andrew Burgess <aburgess@broadcom.com>
1390 * main.h (get_gdb_program_name): Add declaration.
1391 * main.c (get_gdb_program_name): Add definition.
1393 2013-09-17 Doug Evans <dje@google.com>
1395 * dwarf2read.c: Move definitions of complaint functions to after
1396 forward declarations of local functions.
1398 2013-09-17 Muhammad Waqas <mwaqas@codesourcery.com>
1399 Pedro Alves <palves@redhat.com>
1402 * breakpoint.c (remove_threaded_breakpoints): New function.
1403 (_initialize_breakpoint): Attach remove_threaded_breakpoints
1404 as thread_exit observer.
1406 2013-09-17 Pedro Alves <palves@redhat.com>
1409 * ada-tasks.c (task_command_1): Adjust call to print_stack_frame.
1410 * bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd):
1411 * corelow.c (core_open):
1412 * frame.h (print_stack_frame, print_frame_info): New
1413 'set_current_sal' parameter.
1414 * infcmd.c (finish_command, kill_command): Adjust call to
1416 * inferior.c (inferior_command): Likewise.
1417 * infrun.c (normal_stop): Likewise.
1418 * linux-fork.c (linux_fork_context): Likewise.
1419 * record-full.c (record_full_goto_entry, record_full_restore):
1421 * remote-mips.c (common_open): Likewise.
1422 * stack.c (print_stack_frame): New 'set_current_sal' parameter.
1424 (print_frame_info): New 'set_current_sal' parameter. Set the last
1425 displayed sal depending on the new paremeter instead of looking at
1427 (backtrace_command_1, select_and_print_frame, frame_command)
1428 (current_frame_command, up_command, down_command): Adjust call to
1430 * thread.c (print_thread_info, restore_selected_frame)
1431 (do_captured_thread_select): Adjust call to print_stack_frame.
1432 * tracepoint.c (tfind_1): Likewise.
1433 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames)
1434 (mi_cmd_stack_info_frame): Likewise.
1435 * mi/mi-interp.c (mi_on_normal_stop): Likewise.
1436 * mi/mi-main.c (mi_cmd_exec_return, mi_cmd_trace_find): Likewise.
1438 2013-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
1440 * value.c (isvoid_internal_fn): Replace "parameter" with
1443 2013-09-16 Stan Shebs <stan@codesourcery.com>
1445 * README: Update references to writing code for GDB.
1446 * configure.ac (build_warnings): Remove obsolete comment.
1447 * configure: Regenerate.
1448 * gdbarch.sh: Remove references to gdbint.texinfo.
1449 * gdbarch.h: Regenerate.
1450 * gdbtypes.c (objfile_type): Remove comments referencing internals
1453 2013-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
1455 * NEWS: Mention new convenience function $_isvoid.
1456 * value.c (isvoid_internal_fn): New function.
1457 (_initialize_values): Add new convenience function $_isvoid.
1459 2013-09-16 Pierre Muller <muller@sourceware.org>
1461 * arm-linux-tdep.c: Add "elf/common.h" header.
1462 Remove AT_HWCAP macro definintion as it is provided in
1464 * s390-tdep.c: Remove system header <elf.h>
1465 Add "elf/common.h" header for AT_HWCAP definition.
1466 (s390_core_read_description): Use correct CORE_ADDR
1467 for hwcap local variable used as third parameter
1468 of function target_auxv_search.
1470 2013-09-14 Pierre Muller <muller@sourceware.org>
1471 Tom Tromey <tromey@redhat.com>
1472 Pedro Alves <palves@redhat.com>
1474 * common/filestuff.c (gdb_fopen_cloexec): Do not try to use "e"
1475 mode if operating system doesn't know O_CLOEXEC.
1477 2013-09-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1480 * symfile.c (reread_symbols): Move variable obfd_filename to a more
1483 2013-09-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1485 * NEWS: Mention TDB support.
1486 * features/s390-tdb.xml: New file.
1487 * features/s390-te-linux64.xml: New file.
1488 * features/s390x-te-linux64.xml: New file.
1489 * features/Makefile (WHICH): Add new tdescs above.
1490 (s390-te-linux64-expedite): Set.
1491 (s390x-te-linux64-expedite): Set.
1492 * features/s390-te-linux64.c: New file (generated).
1493 * features/s390x-te-linux64.c: New file (generated).
1494 * regformats/s390-te-linux64.dat: New file (generated).
1495 * regformats/s390x-te-linux64.dat: New file (generated).
1496 * s390-tdep.h (HWCAP_S390_HIGH_GPRS): Define.
1497 (HWCAP_S390_TE): Likewise.
1498 (S390_TDB_DWORD0_REGNUM): Likewise.
1499 (S390_TDB_DWORD0_REGNUM): Likewise.
1500 (S390_TDB_ABORT_CODE_REGNUM): Likewise.
1501 (S390_TDB_CONFLICT_TOKEN_REGNUM): Likewise.
1502 (S390_TDB_ATIA_REGNUM): Likewise.
1503 (S390_TDB_R0_REGNUM): Likewise.
1504 (S390_TDB_R1_REGNUM): Likewise.
1505 (S390_TDB_R2_REGNUM): Likewise.
1506 (S390_TDB_R3_REGNUM): Likewise.
1507 (S390_TDB_R4_REGNUM): Likewise.
1508 (S390_TDB_R5_REGNUM): Likewise.
1509 (S390_TDB_R6_REGNUM): Likewise.
1510 (S390_TDB_R7_REGNUM): Likewise.
1511 (S390_TDB_R8_REGNUM): Likewise.
1512 (S390_TDB_R9_REGNUM): Likewise.
1513 (S390_TDB_R10_REGNUM): Likewise.
1514 (S390_TDB_R11_REGNUM): Likewise.
1515 (S390_TDB_R12_REGNUM): Likewise.
1516 (S390_TDB_R13_REGNUM): Likewise.
1517 (S390_TDB_R14_REGNUM): Likewise.
1518 (S390_TDB_R15_REGNUM): Likewise.
1519 (S390_NUM_REGS): Increase.
1520 (S390_IS_TDBREGSET_REGNUM): New macro.
1521 (s390_regmap_tdb): Declare.
1522 (s390_sizeof_tdbregset): Define.
1523 (tdesc_s390_te_linux64): Declare.
1524 (tdesc_s390x_te_linux64): Likewise.
1525 * s390-tdep.c: Add includes for "auxv.h", <elf.h>,
1526 "features/s390-te-linux64.c", and "features/s390x-te-linux64.c".
1527 (s390_regmap_tdb): New regmap.
1528 (s390_supply_tdb_regset): New function.
1529 (s390_tdb_regset): New regset.
1530 (s390_linux64v2_regset_sections): Add TDB regset to list.
1531 (s390x_linux64v2_regset_sections): Likewise.
1532 (s390_regset_from_core_section): Recognize TDB core note section.
1533 (s390_core_read_description): If HWCAP indicates TE support,
1534 select tdesc_s390_te_linux64 or tdesc_s390_s390x_te_linux64.
1535 (s390_gdbarch_init): Handle TDB regset.
1536 (_initialize_s390_tdep): Initialize new tdescs.
1537 * s390-nat.c (HWCAP_S390_HIGH_GPRS): Remove define.
1538 (have_regset_tdb): New variable.
1539 (s390_native_supply): Support register invalidation.
1540 (fetch_regset): Invalidate registers if ptrace yields ENODATA.
1541 (check_regset): Treat ENODATA as "regset exists".
1542 (s390_linux_fetch_inferior_registers): Add TDB.
1543 (s390_read_description): Check for TDB existence and select
1545 * gdbserver/Makefile.in (clean): Add removal of new makefile
1547 (s390-te-linux64.c): New makefile target.
1548 (s390x-te-linux64.c): Likewise.
1549 * gdbserver/configure.srv (srv_regobj): Append new objects
1550 s390-te-linux64.o and s390x-te-linux64.o.
1551 (srv_xmlfiles): Append new files s390-te-linux64.xml,
1552 s390x-te-linux64.xml, and s390-tdb.xml.
1553 * gdbserver/linux-s390-low.c (init_registers_s390_te_linux64): New
1555 (tdesc_s390_te_linux64): Likewise.
1556 (init_registers_s390x_te_linux64): Likewise.
1557 (tdesc_s390x_te_linux64): Likewise.
1558 (s390_check_regset): Treat ENODATA as "regset exists".
1559 (s390_arch_setup): Add TDB regset support.
1560 (initialize_low_arch): Initialize registers for new tdescs.
1562 2013-09-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1564 * s390-tdep.h (S390_IS_GREGSET_REGNUM): New macro.
1565 (S390_IS_FPREGSET_REGNUM): New macro.
1566 * s390-tdep.c (s390_dwarf_regmap): Make const.
1567 (regnum_is_gpr_full): New function for replacing repeated code.
1568 (s390_pseudo_register_name): Use it.
1569 (s390_pseudo_register_type): Likewise.
1570 (s390_pseudo_register_read): Likewise.
1571 (s390_pseudo_register_write): Likewise.
1572 (s390_unwind_pseudo_register): Likewise.
1573 (s390_regmap_gregset): New format for regmap.
1574 (s390x_regmap_gregset): Likewise.
1575 (s390_regmap_fpregset): Likewise.
1576 (s390_regmap_upper): Likewise.
1577 (s390_regmap_last_break): Likewise.
1578 (s390_regmap_system_call): Likewise.
1579 (s390_supply_regset): Adjust to new regmap format.
1580 (s390_collect_regset): Likewise.
1581 * s390-nat.c (s390_native_supply): Adjust to new regmap format.
1582 (s390_native_collect): Likewise.
1583 (supply_gregset): Likewise.
1584 (fill_gregset): Likewise.
1585 (supply_fpregset): Likewise.
1586 (fill_fpregset): Likewise.
1587 (fetch_regset): Likewise.
1588 (store_regset): Likewise.
1589 (s390_linux_fetch_inferior_registers): Likewise.
1590 (s390_linux_fetch_inferior_registers): Likewise.
1592 2013-09-12 Andrew Pinski <apinski@cavium.com>
1594 * aarch64-linux-nat.c (aarch64_linux_set_debug_regs): Zero out regs.
1596 2013-09-10 Andreas Arnez <arnez@linux.vnet.ibm.com>
1598 * config/s390/s390.mh (NATDEPFILES): Add linux-waitpid.o.
1600 2013-09-09 Andrew Burgess <aburgess@broadcom.com>
1602 * top.c (quit_confirm): Remove use of deprecated_init_ui_hook.
1604 2013-09-06 Pedro Alves <palves@redhat.com>
1606 * remote-sim.c (dump_mem, gdbsim_fetch_register)
1607 (gdbsim_store_register, gdbsim_kill, gdbsim_load)
1608 (gdbsim_create_inferior, gdbsim_open, gdbsim_close)
1609 (gdbsim_detach, gdbsim_resume_inferior, gdbsim_wait)
1610 (gdbsim_files_info, gdbsim_mourn_inferior): Send debug output to
1613 2013-09-06 Pedro Alves <palves@redhat.com>
1615 * remote-sim.c (dump_mem): Constify buf parameter.
1616 gdbsim_xfer_inferior_memory): Rename to ...
1617 (gdbsim_xfer_memory): ... this. Adjust interface as
1618 target_xfer_partial helper.
1619 (gdbsim_xfer_partial): New function.
1620 (init_gdbsim_ops): Don't install a deprecated_xfer_memory hook.
1621 Install a to_xfer_partial hook. Send output to gdb_stdlog.
1623 2013-09-06 Pedro Alves <palves@redhat.com>
1625 * remote-sim.c (gdbsim_xfer_inferior_memory): Use
1626 host_address_to_string, and send debug output to gdb_stdlog.
1628 2013-09-06 Ricard Wanderlof <ricardw@axis.com>
1630 * Makefile.in (ALL_TARGET_OBS): Add cris-linux-tdep.o.
1631 * configure.tgt: Add cris-linux-tdep.o and linux-tdep.o to
1632 gdb_target_obs for cris target.
1633 * cris-tdep.c (struct gdbarch_tdep): Move to cris-tdep.h.
1634 (cris_gdbarch_init): Move calls to
1635 set_gdbarch_fetch_tls_load_module_address and
1636 set_solib_svr4_fetch_link_map_offsets to cris-linux-tdep.c.
1637 Add call to gdbarch_init_osabi.
1638 * cris-linux-tdep.c: New file.
1639 * cris-tdep.h: New file.
1641 2013-09-06 Andrew Burgess <aburgess@broadcom.com>
1643 * tui/tui-io.c (tui_initialize_io): Remove legacy comment referring
1644 to deprecated_init_ui_hook.
1646 2013-09-06 Andrew Burgess <aburgess@broadcom.com>
1648 * cli/cli-interp.c (_initialize_cli_interp): Add a
1649 command_loop_proc to interp_procs.
1650 * event-top.c (cli_command_loop): Change signature to match
1651 interp_command_loop_ftype.
1652 * event-top.h (cli_command_loop): Same.
1653 * interps.c (interp_new): Require every interpreter to have a
1655 (current_interp_command_loop): Just call the command_loop_proc on
1656 the current interpreter.
1657 * tui/tui-interp.c (_initialize_tui_interp): Add a
1658 command_loop_proc to interp_procs.
1660 2013-09-06 Ricard Wanderlof <ricardw@axis.com>
1662 * cris-tdep.c (cris_gdbarch_init): Add call to
1663 get_gdbarch_fetch_tls_load_module_address.
1665 2013-09-06 Ricard Wanderlof <ricardw@axis.com>
1667 * cris-tdep.c (cris_elf_greg_t): Rename from elf_greg_t.
1668 (cris_elf_gregset_t): Rename from elf_gregset_t.
1669 (crisv32_elf_gregset_t): Adjust.
1670 (cris_supply_gregset, fetch_core_registers): Adjust.
1672 2013-09-06 Ricard Wanderlof <ricardw@axis.com>
1674 * cris-tdep.c (elf_greg_t): Change typedef to unsigned char[4]
1676 2013-09-05 Andrew Burgess <aburgess@broadcom.com>
1678 * defs.h (deprecated_command_loop_hook): Remove, including
1679 references in comments.
1680 * interps.c (current_interp_command_loop): No longer use
1681 deprecated_command_loop_hook.
1682 (clear_interpreter_hooks): Remove deprecated_command_loop_hook
1684 * top.c (deprecated_command_loop_hook): Remove.
1686 2013-09-05 Pedro Alves <palves@redhat.com>
1688 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): 'dwarf_regnum'
1689 local is now int instead of ULONGEST. Print it with %d
1690 instead of paddress.
1692 2013-09-05 Tristan Gingold <gingold@adacore.com>
1694 * MAINTAINERS: Remove avr maintainership.
1696 2013-09-05 Pedro Alves <palves@redhat.com>
1698 * findvar.c (value_of_register): Rework in terms of
1699 value_of_register_lazy.
1701 2013-09-05 Muhammad Bilal <mbilal@codesourcery.com>
1703 * symfile.c (add_symbol_file_command): Remove trailing
1704 whitespaces and blank line after comment.
1706 2013-09-05 Pedro Alves <palves@redhat.com>
1708 * tui/tui-regs.c (tui_register_format): Don't look at the
1709 register's name here. Return string representing register
1710 value instead of storing it in the data element.
1711 (tui_get_register): Compare register string representations
1712 instead of register value states and contents.
1714 2013-09-05 Pedro Alves <palves@redhat.com>
1717 * tui/tui-regs.c (tui_show_registers): Show registers of the
1718 selected frame, not the current frame.
1720 2013-09-05 Ricard Wanderlof <ricardw@axis.com>
1722 * MAINTAINERS (Write After Approval): Add myself to the list.
1724 2013-09-04 Doug Evans <dje@google.com>
1726 * dwarf2read.c (queue_and_load_all_dwo_tus): New function.
1727 (queue_and_load_dwo_tu): New function.
1728 (lookup_dwo_signatured_type): Set per_cu.tu_read.
1729 (maybe_queue_comp_unit): Rename this_cu argument to dependent_cu.
1730 Make dependent_cu optional.
1731 (dw2_do_instantiate_symtab): If we just loaded a CU from a DWO,
1732 and an older .gdb_index is in use, queue and load all its TUs too.
1734 2013-09-04 Jan Kratochvil <jan.kratochvil@redhat.com>
1736 Code cleanup: Change OPF_DISABLE_REALPATH to OPF_RETURN_REALPATH.
1737 * cli/cli-cmds.c (find_and_open_script): Add OPF_RETURN_REALPATH to
1738 variable search_flags.
1739 * defs.h (OPF_DISABLE_REALPATH): Rename to ...
1740 (OPF_RETURN_REALPATH): ... here.
1741 * dwarf2read.c (try_open_dwop_file): Set OPF_RETURN_REALPATH for flags.
1742 * exec.c (exec_file_attach): Remove OPF_DISABLE_REALPATH from openp
1744 * nto-tdep.c (nto_find_and_open_solib): Add OPF_RETURN_REALPATH for
1746 * solib.c (solib_find): Likewise. Four times.
1747 * source.c (openp): Change OPF_DISABLE_REALPATH to OPF_RETURN_REALPATH
1748 in the function comment and for the realpath_fptr variable.
1749 (source_full_path_of): Add OPF_RETURN_REALPATH for openp call.
1750 (find_and_open_source): Likewise. Twice.
1751 * symfile.c (symfile_bfd_open): Likewise, also twice.
1753 2013-09-04 Doug Evans <dje@google.com>
1755 * progspace.c (save_current_space_and_thread): Remove unnecessary
1756 call to save_current_inferior.
1758 2013-09-04 Andrew Burgess <aburgess@broadcom.com>
1760 * sh64-tdep.c (sh64_do_register): Return after printing message
1761 about unavailable register contents.
1763 2013-09-04 Muhammad Bilal <mbilal@codesourcery.com>
1764 Pedro Alves <palves@redhat.com>
1766 * symfile.c (add_symbol_file_command): Error out on unknown
1767 option. Handle EXPECTING_SEC_ADDR/EXPECTING_SEC_NAME before '-'
1768 options and collapse into single conditional branch.
1770 2013-09-03 Luis Machado <lgustavo@codesourcery.com>
1772 * inf-child.c (inf_child_follow_fork): New parameter
1774 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise.
1775 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
1776 * inferior.h (detach_fork): Remove.
1777 * infrun.c (detach_fork): Adjust comment and make it
1779 (follow_fork): Pass detach_fork parameter to
1781 * linux-nat.c (linux_child_follow_fork): New parameter
1783 * target.c (target_follow_fork): New parameter detach_fork.
1784 Pass detach_fork as parameter and print its value.
1785 * target.h (struct target_ops) <to_follow_fork>: New int
1787 (target_follow_fork): New parameter detach_fork.
1789 2013-09-03 Joel Brobecker <brobecker@adacore.com>
1791 * solib-ia64-hpux.c (ia64_hpux_relocate_section_addresses):
1792 Replace sec->bfd by sec->the_bfd_section->owner.
1794 2013-09-03 Yao Qi <yao@codesourcery.com>
1796 * linux-tdep.c (linux_is_uclinux): New function. Code moved
1797 from linux_has_shared_address_space.
1798 (linux_has_shared_address_space): Call linux_is_uclinux.
1799 * linux-tdep.h (linux_is_uclinux): Declare.
1800 * m68klinux-tdep.c (m68k_linux_get_sigtramp_info): Call
1803 2013-09-03 Yao Qi <yao@codesourcery.com>
1805 * config/djgpp/fnchange.lst: Remove entry of
1806 i386-interix-nat.c and i386-interix-tdep.c.
1807 * configure.ac: Remove '*-*-interix*'.
1808 * configure: Re-generated.
1809 * defs.h (enum gdb_osabi): Remove GDB_OSABI_INTERIX.
1810 * i386-cygwin-tdep.c (i386_cygwin_osabi_sniffer): Remove
1812 * osabi.c (gdb_osabi_names): Remove "Interix".
1814 2013-09-03 Yao Qi <yao@codesourcery.com>
1816 * arch-utils.c: Fix typo in the comment to gdbarch_update_p.
1818 2013-09-02 Markus Metzger <markus.t.metzger@intel.com>
1820 * record.h (record_print_flag) <record_print_src_line,
1821 record_print_insn_range>: Rename into ...
1822 (record_print_flag) <record_print_src_line,
1823 record_print_insn_range>: ... this. Update all users.
1825 2013-09-02 Pierre Muller <muller@sourceware.org>
1827 * windows-nat.c (windows_xfer_memory): Handle ERROR_PARTIAL_COPY
1830 2013-09-02 Pierre Muller <muller@sourceware.org>
1832 * windows-nat.c (windows_xfer_memory): Fix compilation failure
1833 by use of plongest function.
1835 2013-09-02 Tristan Gingold <gingold@adacore.com>
1837 * NEWS: Add entry mentioning support for native Windows x64
1840 * amd64-windows-tdep.c: #include "objfiles.h", "frame-unwind.h",
1841 "coff/internal.h", "coff/i386.h", "coff/pe.h" and "libcoff.h".
1842 (struct amd64_windows_frame_cache): New struct.
1843 (amd64_windows_w2gdb_regnum): New global.
1844 (pc_in_range, amd64_windows_frame_decode_epilogue)
1845 (amd64_windows_frame_decode_insns, amd64_windows_find_unwind_info)
1846 (amd64_windows_frame_cache, amd64_windows_frame_prev_register)
1847 (amd64_windows_frame_this_id): New functions.
1848 (amd64_windows_frame_unwind): New static global.
1849 (amd64_windows_skip_prologue): New function.
1850 (amd64_windows_init_abi): Call frame_unwind_prepend_unwinder
1851 with amd64_windows_frame_unwind. Call set_gdbarch_skip_prologue
1852 with amd64_windows_skip_prologue.
1854 2013-08-30 Joel Brobecker <brobecker@adacore.com>
1858 2013-08-30 Pedro Alves <palves@redhat.com>
1860 * mi/mi-main.c (mi_cmd_trace_find): Use LOC_AND_ADDRESS instead of
1863 2013-08-30 Pedro Alves <palves@redhat.com>
1865 * thread.c (restore_selected_frame): Use SRC_AND_LOC, and change
1868 2013-08-30 Pedro Alves <palves@redhat.com>
1870 * bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd):
1871 Adjust arguments to print_stack_frame.
1873 2013-08-30 Pedro Alves <palves@redhat.com>
1875 * ada-tasks.c (task_command_1): Write SRC_AND_LOC instead '1'.
1877 2013-08-30 Pedro Alves <palves@redhat.com>
1879 * frame.h (show_and_print_stack_frame): Delete declaration.
1881 2013-08-30 Phil Muldoon <pmuldoon@redhat.com>
1885 * python/py-arch.c (ARCHPY_REQUIRE_VALID): New macro.
1886 (archpy_name): Check for valid architecture.
1887 (archpy_disassemble): Ditto.
1889 2013-08-29 Joel Brobecker <brobecker@adacore.com>
1891 * rs6000-nat.c (rs6000_ptrace32): Cast "addr" to "uintptr_t"
1892 instead of "long long" in call to ptrace64.
1894 2013-08-29 Andrew Burgess <aburgess@broadcom.com>
1896 * mi/mi-interp.c (mi_command_loop): Change signature to match
1897 interp_command_loop_ftype.
1898 (mi1_command_loop): Remove.
1899 (mi2_command_loop): Remove.
1900 (mi3_command_loop): Remove.
1901 (mi_interpreter_resume): Remove setting of
1902 deprecated_command_loop_hook.
1903 (_initialize_mi_interp): Set mi_command_loop as the command loop
1906 2013-08-29 Sanimir Agovic <sanimir.agovic@intel.com>
1908 * valops.c (do_search_struct_field): Pass v2 instead of base_type to
1911 2013-08-29 Sanimir Agovic <sanimir.agovic@intel.com>
1913 * value.c (allocate_value_contents): Make static.
1914 * value.h (allocate_value_contents): Remove prototype.
1916 2013-08-29 Sanimir Agovic <sanimir.agovic@intel.com>
1918 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use value_at_lazy instead
1919 of assembling value via allocate_value_lazy and attribute setter.
1920 * findvar.c (default_read_var_value): Use value_at_lazy instead of
1921 assembling value via allocate_value_lazy and attribute setter.
1922 * valops.c (do_search_struct_field): Use value_at_lazy instead of
1923 assembling value via allocate_value_lazy and attribute setter.
1925 2013-08-29 Sanimir Agovic <sanimir.agovic@intel.com>
1927 * value.c (value_from_contents_and_address): Replace allocate_value and
1928 memcpy with value_from_contents.
1930 2013-08-29 Phil Muldoon <pmuldoon@redhat.com>
1932 * python/py-framefilter.c (py_print_frame): Remove usage of
1933 PyString_AsString. Use python_string_to_host_string instead.
1934 Refactor function to work with a string as a new allocation
1935 instead of a pointer.
1936 (py_print_frame): Ditto.
1937 * python/lib/gdb/frames.py (return_list): Cain iterators together
1938 instead of adding them as a list.
1939 (_sort_list): Call return_list, and remove duplicate code.
1940 (execute_frame_filters): Convert iterator to a list with list().
1941 * python/lib/gdb/command/frame_filters.py
1942 (SetFrameFilterPriority._set_filter_priority): Convert priority
1943 attribute to an integer.
1944 * python/lib/gdb/FrameIterator.py (FrameIterator.next): Define
1945 wrapper function __next__.
1946 * python/lib/gdb/FrameDecorator.py: If basestring not defined,
1949 2013-08-29 Phil Muldoon <pmuldoon@redhat.com>
1952 * python/py-framefilter.c (apply_frame_filter): Check
1953 gdb_python_initialized. Exit if the Python frame-filter code
1954 cannot be initialized.
1956 2013-08-29 Phil Muldoon <pmuldoon@redhat.com>
1959 * top.c (print_gdb_version): Remove erroneous newline after help
1962 2013-08-29 Yao Qi <yao@codesourcery.com>
1964 * varobj.c (install_dynamic_child): Remove trailing space.
1965 Add one blank line after variable declaration.
1967 2013-08-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1970 * corefile.c (get_exec_file): Use exec_filename.
1971 * defs.h (OPF_DISABLE_REALPATH): New definition. Add new comment.
1972 * exec.c (exec_close): Free EXEC_FILENAME.
1973 (exec_file_attach): New variable canonical_pathname. Use
1974 OPF_DISABLE_REALPATH. Call gdb_realpath explicitly. Set
1976 * exec.h (exec_filename): New.
1977 * inferior.c (print_inferior, inferior_command): Use
1978 PSPACE_EXEC_FILENAME.
1979 * mi/mi-main.c (print_one_inferior): Likewise.
1980 * progspace.c (clone_program_space, print_program_space): Likewise.
1981 * progspace.h (struct program_space): New field pspace_exec_filename.
1982 * source.c (openp): Describe OPF_DISABLE_REALPATH. New variable
1983 realpath_fptr, initialize it from OPF_DISABLE_REALPATH, use it.
1985 2013-08-28 Will Newton <will.newton@linaro.org>
1987 * common/linux-ptrace.c: Include stdint.h unconditionally.
1989 2013-08-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1992 * nto-tdep.c (nto_find_and_open_solib): Use OPF_TRY_CWD_FIRST.
1994 2013-08-28 Yao Qi <yao@codesourcery.com>
1995 Pedro Alves <palves@redhat.com>
1997 * event-top.c (gdb_setup_readline): Call stderr_fileopen
1998 instead of stdio_fileopen.
1999 * main.c (captured_main) [__MINGW32__]: Set stderr unbuffered.
2000 .Call stderr_fileopen instead of stdio_fileopen.
2001 * ui-file.c [__MINGW32__] (stderr_file_write): New function.
2002 [__MINGW32__] (stderr_file_fputs): New function.
2003 (stderr_fileopen): New function.
2004 * ui-file.h (stderr_fileopen): Declare.
2006 2013-08-27 Doug Evans <dje@google.com>
2008 * dwarf2read.c (struct dwarf2_cu): Tweak comment.
2009 (struct dwarf2_per_cu_data): Ditto.
2010 (maybe_queue_comp_unit): Delete forward decl. Add comment.
2011 (process_imported_unit_die): Ditto.
2012 (follow_die_sig_1): Simplify assert.
2014 2013-08-27 Pedro Alves <palves@redhat.com>
2016 * windows-nat.c (windows_xfer_memory): Adjust prototype to follow
2017 xfer_partial's interface. Return TARGET_XFER_E_IO on error.
2018 (windows_xfer_partial): Defer TARGET_OBJECT_MEMORY handling to
2019 windows_xfer_memory directly.
2020 (init_windows_ops): Don't install a deprecated_xfer_memory method.
2022 2013-08-27 Pedro Alves <palves@redhat.com>
2024 * darwin-nat.c (darwin_xfer_memory): Delete.
2025 (_initialize_darwin_inferior): Don't install a
2026 deprecated_xfer_memory method.
2028 2013-08-27 Pedro Alves <pedro@codesourcery.com>
2029 Yao Qi <yao@codesourcery.com>
2031 * mi/mi-cmd-stack.c (list_args_or_locals): Adjust prototype.
2032 (parse_no_frames_option): Remove.
2033 (mi_cmd_stack_list_locals): Handle --skip-unavailable.
2034 (mi_cmd_stack_list_args): Adjust.
2035 (mi_cmd_stack_list_variables): Handle --skip-unavailable.
2036 (list_arg_or_local): Add new parameter 'skip_unavailable'. Return
2037 early if SKIP_UNAVAILABLE is true and ARG->val is unavailable.
2039 (list_args_or_locals): New parameter 'skip_unavailable'.
2041 * valprint.c (scalar_type_p): Rename to ...
2042 (val_print_scalar_type_p): ... this. Make extern.
2043 (val_print, value_check_printable): Adjust.
2044 * valprint.h (val_print_scalar_type_p): Declare.
2045 * value.c (value_entirely_unavailable): New function.
2046 * value.h (value_entirely_unavailable): Declare.
2048 * NEWS: Mention the new option "--skip-unavailable" to MI
2049 commands '-stack-list-locals', '-stack-list-arguments' and
2050 '-stack-list-variables'.
2052 2013-08-27 Yao Qi <yao@codesourcery.com>
2054 * mi/mi-cmd-stack.c (parse_no_frames_option): Remove.
2055 (mi_cmd_stack_list_args): Use mi_getopt_silent to handle
2057 * mi/mi-getopt.c (mi_getopt): Remove.
2058 (mi_getopt_1): Renamed from mi_getopt. Add one parameter
2060 (mi_getopt): Call mi_getopt_1.
2061 (mi_getopt_silent): New.
2062 * mi/mi-getopt.h (mi_getopt_silent): Declare.
2064 2013-08-26 Doug Evans <dje@google.com>
2067 * dwarf2read.c (dw2_dump): Print some minimal information indicating
2068 .gdb_index is in use.
2069 * symfile.c (reread_symbols): Reset objfile->sf.
2071 * NEWS: Document "mt print objfiles" now takes optional regexp.
2072 * symmisc.c (maintenance_print_objfiles): Argument is now an optional
2073 regexp of objfiles to print.
2074 (_initialize_symmisc): Update doc string for "mt print objfiles".
2076 * dwarf2read.c (write_psymtabs_to_index): Move error checks ahead of
2077 missing debug info checks.
2079 2013-08-26 Raunaq Bathija <raunaq12@in.ibm.com>
2080 Ulrich Weigand <uweigand@de.ibm.com>
2082 * xcoffread.c (arrange_linetable): Add fix to correctly handle
2083 line tables generated by XLC compiled binaries.
2085 2013-08-23 Doug Evans <dje@google.com>
2087 * symmisc.c (dump_symtab): Delete prototype.
2088 (dump_msymbols, dump_objfile): Ditto.
2089 (maintenance_info_symtabs): Mark as dont_repeat.
2090 (_initialize_symmisc): Improve doc string for "mt info symtabs".
2092 * elfread.c (elf_symfile_read): Move "Done reading minimal symbols"
2093 debugging printf to better location.
2095 2013-08-23 Pedro Alves <palves@redhat.com>
2097 * target.c (target_read_live_memory): Change type of 'ret' local
2100 2013-08-23 Pedro Alves <palves@redhat.com>
2102 * remote.c (remote_write_bytes_aux, remote_write_bytes)
2103 (remote_read_bytes): Change return type to LONGEST, and adjust to
2104 return a target_xfer_error on error.
2105 (remote_xfer_memory): Delete.
2106 (remote_flash_write): Change type of 'ret' local to LONGEST.
2107 (remote_xfer_partial, remote_xfer_partial): Adjust.
2108 (init_remote_ops): Don't install a deprecated_xfer_memory hook.
2110 2013-08-23 Pierre Muller <muller@sourceware.org>
2112 ARI fix: Push # directives to start of line.
2113 * rs6000-nat.c (rs6000_ptrace32, rs6000_ptrace64): Rule applied.
2115 2013-08-12 Muhammad Waqas <mwaqas@codesourcery.com>
2118 * breakpoint.c (enable_command, disable_command): Iterate over
2119 all specified breakpoint locations.
2121 2013-08-22 Luis Machado <lgustavo@codesourcery.com>
2123 * common/linux-ptrace.c (linux_fork_to_function): Push #
2124 directives to the start of the line.
2125 (linux_check_ptrace_features): Fix warning message to use
2128 2013-08-22 Luis Machado <lgustavo@codesourcery.com>
2130 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-nat.h and
2131 nat/linux-waitpid.h.
2132 (linux-waitpid.o): New object file rule.
2133 * common/linux-ptrace.c: Include nat/linux-waitpid.h.
2134 (current_ptrace_options): Moved from linux-nat.c.
2135 (linux_ptrace_test_ret_to_nx): Use type casts for ptrace
2137 (linux_fork_to_function): New function.
2138 (linux_grandchild_function): Likewise.
2139 (linux_child_function): Likewise.
2140 (linux_check_ptrace_features): New function, heavily
2141 based on linux-nat.c:linux_test_for_tracefork.
2142 (linux_enable_event_reporting): New function.
2143 (ptrace_supports_feature): Likewise.
2144 (linux_supports_tracefork): Likewise.
2145 (linux_supports_traceclone): Likewise.
2146 (linux_supports_tracevforkdone): Likewise.
2147 (linux_supports_tracesysgood): Likewise.
2148 * common/linux-ptrace.h (HAS_NOMMU): Moved from
2149 gdbserver/linux-low.c.
2150 (linux_enable_event_reporting): New declaration.
2151 (linux_supports_tracefork): Likewise.
2152 (linux_supports_traceclone): Likewise.
2153 (linux_supports_tracevforkdone): Likewise.
2154 (linux_supports_tracesysgood): Likewise.
2155 * config.in (PTRACE_TYPE_ARG4): Regenerate.
2156 * config/aarch64/linux.mh (NATDEPFILES): Add linux-waitpid.o.
2157 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
2158 * config/arm/linux.mh (NATDEPFILES): Likewise.
2159 * config/i386/linux.mh (NATDEPFILES): Likewise.
2160 * config/i386/linux64.mh (NATDEPFILES): Likewise.
2161 * config/ia64/linux.mh (NATDEPFILES): Likewise.
2162 * config/m32r/linux.mh (NATDEPFILES): Likewise.
2163 * config/m68k/linux.mh (NATDEPFILES): Likewise.
2164 * config/mips/linux.mh (NATDEPFILES): Likewise.
2165 * config/pa/linux.mh (NATDEPFILES): Likewise..
2166 * config/powerpc/linux.mh (NATDEPFILES): Likewise..
2167 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
2168 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
2169 * config/sparc/linux.mh (NATDEPFILES): Likewise.
2170 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
2171 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
2172 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
2173 * configure.ac (AC_CACHE_CHECK): Add void * to the list of
2174 ptrace's 4th argument's types.
2175 Check the type of PTRACE_TYPE_ARG4.
2176 * configure: Regenerate.
2177 * linux-nat.c: Include nat/linux-nat.h and nat/linux-waitpid.h.
2178 (SYSCALL_SIGTRAP): Moved to nat/linux-nat.h.
2179 (linux_supports_tracefork_flag): Remove.
2180 (linux_supports_tracesysgood_flag): Likewise.
2181 (linux_supports_tracevforkdone_flag): Likewise.
2182 (current_ptrace_options): Moved to
2183 common/linux-ptrace.c.
2184 (linux_tracefork_child): Remove.
2185 (my_waitpid): Remove.
2186 (linux_test_for_tracefork): Renamed to
2187 linux_check_ptrace_features and moved to common/linux-ptrace.c.
2188 (linux_test_for_tracesysgood): Remove.
2189 (linux_supports_tracesysgood): Remove.
2190 (linux_supports_tracefork): Remove.
2191 (linux_supports_tracevforkdone): Remove.
2192 (linux_enable_tracesysgood): Remove.
2193 (linux_enable_event_reporting): Remove.
2194 (linux_init_ptrace): New function.
2195 (linux_child_post_attach): Call linux_init_ptrace.
2196 (linux_child_post_startup_inferior): Call linux_init_ptrace.
2197 (linux_child_follow_fork): Call linux_supports_tracefork
2198 and linux_supports_tracevforkdone.
2199 (linux_child_insert_fork_catchpoint): Call
2200 linux_supports_tracefork.
2201 (linux_child_insert_vfork_catchpoint): Likewise.
2202 (linux_child_set_syscall_catchpoint): Call
2203 linux_supports_tracesysgood.
2204 (lin_lwp_attach_lwp): Call linux_supports_tracefork.
2205 * nat/linux-nat.h: New file.
2206 * nat/linux-waitpid.c: New file.
2207 * nat/linux-waitpid.h: New file.
2209 2013-08-22 Samuel Bronson <naesten@gmail.com>
2211 ARM Linux support for `catch syscall'.
2212 * syscalls/arm-linux.py: New file.
2213 * syscalls/arm-linux.xml: Likewise.
2214 * arm-linux-tdep.c (arm_linux_get_syscall_number): New function.
2215 (arm_linux_init_abi): Register the new function and syscall xml file.
2216 * data-directory/Makefile.in: Install the new syscall xml file.
2217 * NEWS: Brag about this.
2219 2013-08-22 Pedro Alves <palves@redhat.com>
2222 * corefile.c (target_xfer_memory_error): New function.
2223 (memory_error): Defer EIO to target_memory_error.
2224 (read_memory): Use target_xfer_partial, and handle finer-grained
2226 * target.c (target_xfer_error_to_string): New function.
2227 (memory_xfer_partial_1): If memory is known to be
2228 unavailable, return TARGET_XFER_E_UNAVAILABLE instead of -1.
2229 (target_xfer_partial): Make extern.
2230 * target.h (enum target_xfer_error): New enum.
2231 (target_xfer_error_to_string): Declare function.
2232 (target_xfer_partial): Declare function.
2233 (struct target_ops) <xfer_partial>: Adjust describing comment.
2235 2013-08-22 Alan Modra <amodra@gmail.com>
2237 * configure.host: Support powerpc64le-linux and powerpcle-linux hosts.
2238 * configure.tgt: Likewise as targets.
2240 2013-08-20 Doug Evans <dje@google.com>
2242 * buildsym.c (subfile_stack): Move here from buildsym.h.
2243 (pending_macros): Ditto.
2244 (get_macro_table): New function.
2245 (buildsym_init): Initialize subfile_stack.
2246 * coffread.c (type_vector,type_vector_length): Moved here from
2248 (INITIAL_TYPE_VECTOR_LENGTH): Ditto.
2249 (coff_symtab_read): Use it.
2250 * dbxread.c (read_ofile_symtab): Delete init of subfile_stack.
2251 * dwarf2read.c (macro_start_file): Replace uses of pending_macros
2252 with call to get_macro_table.
2253 * stabsread.c (type_vector,type_vector_length): Moved here from
2255 (INITIAL_TYPE_VECTOR_LENGTH): Ditto.
2256 * buildsym.h (get_macro_table): Declare.
2258 2013-08-20 Tom Tromey <tromey@redhat.com>
2260 * dbxread.c (record_minimal_symbol): Make 'name' argument const.
2262 (read_dbx_dynamic_symtab): Make 'name' const. Remove casts.
2264 2013-08-20 Doug Evans <dje@google.com>
2266 * blockframe.c: Remove #include "psymtab.h".
2267 * cp-support.c: Ditto.
2271 2013-08-20 Tom Tromey <tromey@redhat.com>
2274 * exceptions.h (return_mask): Now an enum.
2275 (RETURN_MASK_QUIT, RETURN_MASK_ERROR, RETURN_MASK_ALL): Now
2278 2013-08-20 Tom Tromey <tromey@redhat.com>
2280 * cp-namespace.c (cp_lookup_symbol_imports_or_template): Use
2282 * elfread.c (elf_rel_plt_read, elf_gnu_ifunc_record_cache)
2283 (elf_gnu_ifunc_resolve_by_got): Use get_objfile_arch.
2284 * jit.c (jit_object_close_impl): Update.
2285 * jv-lang.c (get_dynamics_objfile): Update.
2286 * linespec.c (add_minsym): Use get_dynamics_objfile.
2287 * objfiles.c (get_objfile_bfd_data): Initialize 'gdbarch' field.
2288 (allocate_objfile): Don't initialize 'gdbarch' field.
2289 (get_objfile_arch): Update.
2290 * objfiles.h (struct objfile_per_bfd_storage) <gdbarch>: New field,
2292 (struct objfile) <gdbarch>: ... here. Remove.
2293 * stap-probe.c (stap_can_evaluate_probe_arguments): Use
2295 * symfile.c (init_entry_point_info): Use get_objfile_arch.
2297 2013-08-20 Alan Modra <amodra@gmail.com>
2299 * doublest.c (convert_floatformat_to_doublest): Use fmt->split_half
2300 for IBM long double nan and inf.
2301 (floatformat_is_negative, floatformat_classify,
2302 floatformat_mantissa): Similarly.
2303 (floatformat_ieee_single, floatformat_ieee_double,
2304 floatformat_ieee_quad, floatformat_arm_ext,
2305 floatformat_ia64_spill): Delete unused vars.
2306 (_initialize_doublest): Delete unused function.
2307 * gdbtypes.c (floatformats_ibm_long_double): Use new big- and
2308 little-endian variants of floatformat_ibm_long_double.
2310 2013-08-19 Luis Machado <lgustavo@codesourcery.com>
2312 * Makefile.in (SFILES): Remove common/target-common.c and
2313 add target/waitstatus.c.
2314 (HFILES_NO_SRCDIR): Remove common/target-common.h and add
2315 target/resume.h, target/wait.h and target/waitstatus.h.
2316 (COMMON_OBS): Remove target-common.o and add
2318 (target-common.o): Remove.
2319 (waitstatus.o): New target object file.
2320 * common/target-common.c: Move contents to
2321 target/waitstatus.c and remove.
2322 * common/target-common.h: Move contents to other files and
2324 (enum resume_kind: Move to target/resume.h.
2325 (TARGET_WNOHANG): Move to target/wait.h.
2326 (enum target_waitkind): Move to target/waitstatus.h.
2327 (struct target_waitstatus): Likewise.
2328 * target.h: Do not include target-common.h and
2329 include target/resume.h, target/wait.h and
2330 target/waitstatus.h.
2331 * target/resume.h: New file.
2332 * target/wait.h: New file.
2333 * target/waitstatus.h: New file.
2334 * target/waitstatus.c: New file.
2336 2013-08-19 Pedro Alves <palves@redhat.com>
2338 * linux-nat.c (linux_test_for_tracefork)
2339 (linux_test_for_tracesysgood, linux_child_follow_fork)
2340 (lin_lwp_attach_lwp, linux_nat_resume): Don't block child signals.
2341 (linux_nat_wait_1): Extend comment.
2342 (linux_async_pipe): Add comment.
2344 2013-08-15 Kevin Buettner <kevinb@redhat.com>
2346 * rl78-tdep.c (RL78_RAW_PC_REGNUM): New enum.
2347 (RL78_PC_REGNUM): Move to list of pseudo-register enums.
2348 (rl78_register_type, rl78_register_name, rl78_register_reggroup_p):
2349 Update to account for fact that PC is now a pseudo-register.
2350 (rl78_pseudo_register_write, rl78_pseudo_register_read): Add
2351 cases for RL78_PC_REGNUM.
2353 2013-08-15 Muhammad Bilal <mbilal@codesourcery.com>
2356 * top.c (quit_force): Skip writing history file
2357 if input is not from terminal.
2359 2013-08-14 Tom Tromey <tromey@redhat.com>
2361 * remote.c (struct remote_state) <echo_nextthread, nextthread,
2362 resultthreadlist>: New fields.
2363 (OPAQUETHREADBYTES, threadref, MAXTHREADLISTRESULTS): Move earlier.
2364 (remote_get_threadlist, remote_threadlist_iterator): Use
2365 new fields. Remove static variables.
2367 2013-08-14 Tom Tromey <tromey@redhat.com>
2369 * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p,
2370 remote_watch_data_address>: New fields.
2371 (remote_stopped_by_watchpoint_p, remote_watch_data_address): Remove.
2372 (process_stop_reply, remote_wait_as)
2373 (remote_check_watch_resources, remote_stopped_data_address): Update.
2375 2013-08-14 Tom Tromey <tromey@redhat.com>
2377 * remote.c (struct remote_state) <async_client_callback,
2378 async_client_context>: New fields.
2379 (async_client_callback, async_client_context): Remove.
2380 (remote_async_serial_handler, remote_async): Update.
2382 2013-08-14 Tom Tromey <tromey@redhat.com>
2384 * remote.c (sizeof_pkt): Remove.
2385 (remote_trace_find): Use rs->buf_size, not sizeof_pkt.
2387 2013-08-14 Tom Tromey <tromey@redhat.com>
2389 * remote.c (struct remote_state) <use_threadinfo_query,
2390 use_threadextra_query>: New fields.
2391 (remote_threads_info, remote_threads_extra_info)
2392 (remote_open_1): Update.
2394 2013-08-14 Tom Tromey <tromey@redhat.com>
2396 * remote.c (struct remote_state) <finished_object,
2397 finished_annex, finished_offset>: New fields.
2398 (remote_read_qxfer): Use remote_state fields; remove static
2401 2013-08-14 Tom Tromey <tromey@redhat.com>
2403 * remote.c (struct remote_state) <last_sent_step>:
2405 (last_sent_step): Remove.
2406 (remote_resume, remote_wait_as): Update.
2408 2013-08-14 Tom Tromey <tromey@redhat.com>
2410 * remote.c (struct remote_state) <last_sent_signal>:
2412 (last_sent_signal): Remove.
2413 (new_remote_state, remote_resume, remote_wait_as): Update.
2415 2013-08-14 Tom Tromey <tromey@redhat.com>
2417 * remote.c (struct remote_state) <last_program_signals_packet>:
2419 (last_program_signals_packet): Remove.
2420 (remote_program_signals, remote_open_1): Update.
2422 2013-08-14 Tom Tromey <tromey@redhat.com>
2424 * remote.c (struct remote_state) <last_pass_packet>:
2426 (last_pass_packet): Remove.
2427 (remote_pass_signals, remote_open_1): Update.
2429 2013-08-14 Tom Tromey <tromey@redhat.com>
2431 * remote.c (struct remote_state) <remote_traceframe_number>:
2433 (remote_traceframe_number): Remove.
2434 (new_remote_state, remote_open_1, set_remote_traceframe)
2435 (remote_trace_find): Update.
2437 2013-08-14 Tom Tromey <tromey@redhat.com>
2439 * remote.c (struct remote_state) <general_thread, continue_thread>:
2441 (general_thread, continue_thread): Remove.
2442 (record_currthread, set_thread, set_general_process)
2443 (remote_open_1, extended_remote_attach_1, remote_wait_as)
2444 (extended_remote_mourn_1): Update.
2446 2013-08-14 Tom Tromey <tromey@redhat.com>
2448 * remote.c (struct remote_state) <remote_desc>: New field.
2449 (remote_desc): Remove.
2450 (remote_threads_info, remote_threads_extra_info, remote_close)
2451 (send_interrupt_sequence, remote_start_remote, remote_open_1)
2452 (readchar, remote_xfer_partial, remote_rcmd, packet_command)
2453 (remote_hostio_send_command, remote_file_put, remote_file_get)
2454 (remote_file_delete, remote_can_async_p, remote_is_async_p)
2455 (remote_async, remote_new_objfile, set_range_stepping): Update.
2457 2013-08-14 Tom Tromey <tromey@redhat.com>
2459 * remote.c (remote_state): Now a pointer.
2460 (get_remote_state_raw): Update.
2461 (new_remote_state): New function.
2462 (_initialize_remote): Use new_remote_state.
2464 2013-08-14 Tom Tromey <tromey@redhat.com>
2466 * remote.c (remote_protocol_features): Now const.
2468 2013-08-14 Tom Tromey <tromey@redhat.com>
2470 * remote.c (crc32_table, crc32): Remove.
2471 (remote_verify_memory): Use xcrc32.
2473 2013-08-13 Sergio Durigan Junior <sergiodj@redhat.com>
2475 * value.h (create_internalvar_type_lazy): Adjust prototype
2478 2013-08-13 Andrew Burgess <aburgess@broadcom.com>
2480 * common/format.c (parse_format_string): Don't allow '#' flag for
2481 pointer arguments in format string.
2483 2013-08-13 Pierre Muller <muller@sourceware.org>
2485 * utils.c (init_page_info): Only call tgetnum function
2486 if rl_get_screen_size did not return useful values.
2488 2013-08-12 Ali Anwar <ali_anwar@codesourcery.com>
2490 PR breakpoints/15117
2491 * linespec.c (linespec_parse_basic): Check for convenience
2492 variable or history value while parsing.
2494 2013-08-12 Sergio Durigan Junior <sergiodj@redhat.com>
2496 Revert implementation of gdbarch_gdb_signal_{to,from}_target for
2498 * avr-tdep.c: Remove include of "linux-tdep.h". Remove enum with
2499 different signals between the generic Linux kernel implementation
2501 (avr_linux_gdb_signal_from_target): Delete.
2502 (avr_linux_gdb_signal_to_target): Delete.
2503 (avr_gdbarch_init): Don't set gdbarch_gdb_signal_{to,from}_target.
2505 2013-08-09 Doug Evans <dje@google.com>
2507 * dwarf2read.c (create_addrmap_from_index): Ignore bad address table
2510 2013-08-09 Sergio Durigan Junior <sergiodj@redhat.com>
2512 * linux-tdep.c: Define enum with generic signal numbers.
2513 (linux_gdb_signal_from_target): New function.
2514 (linux_gdb_signal_to_target): Likewise.
2515 (linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
2516 methods to the functions above.
2517 * linux-tdep.h (linux_gdb_signal_from_target): New prototype.
2518 (linux_gdb_signal_to_target): Likewise.
2519 * alpha-linux-tdep.c: Define new enum with signals different
2520 from generic Linux kernel.
2521 (alpha_linux_gdb_signal_from_target): New function.
2522 (alpha_linux_gdb_signal_to_target): Likewise.
2523 (alpha_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
2524 with the functions mentioned above.
2525 * avr-tdep.c: Define enum with differences between Linux kernel
2527 (avr_linux_gdb_signal_from_target): New function.
2528 (avr_linux_gdb_signal_to_target): Likewise.
2529 (avr_gdbarch_init): Set gdbarch_gdb_signal_{to,from}_target to
2530 the functions mentioned above.
2531 * sparc-linux-tdep.c: Define enum with differences between SPARC
2532 and generic Linux kernel signal numbers.
2533 (sparc32_linux_gdb_signal_from_target): New function.
2534 (sparc32_linux_gdb_signal_to_target): Likewise.
2535 (sparc32_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
2536 to the functions defined above.
2537 * xtensa-linux-tdep.c: Define enum with differences between
2538 Xtensa and Linux kernel generic signals.
2539 (xtensa_linux_gdb_signal_from_target): New function.
2540 (xtensa_linux_gdb_signal_to_target): Likewise.
2541 (xtensa_linux_init_abi): Set gdbarch_gdb_signal_to_target
2542 to the functions defined above.
2543 * mips-linux-tdep.c: Define enum with differences between
2544 signals in MIPS and Linux kernel generic ones.
2545 (mips_gdb_signal_to_target): New function.
2546 (mips_gdb_signal_from_target): Redefine to use new enum, handle
2547 only different signals from the Linux kernel generic.
2548 (mips_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
2549 the functions defined above.
2550 * mips-linux-tdep.h (enum mips_signals): Remove.
2552 2013-08-09 Pedro Alves <palves@redhat.com>
2554 * avr-tdep.c (XMALLOC): Delete macro.
2555 * cli/cli-dump.c (XMALLOC): Delete macro.
2557 2013-08-09 Pedro Alves <palves@redhat.com>
2559 * cli/cli-dump.c: Don't include cli/cli-dump.h.
2560 (scan_expression_with_cleanup, scan_filename_with_cleanup)
2561 (fopen_with_cleanup, add_dump_command): Make static.
2562 * cli/cli-dump.h: Delete file.
2563 * Makefile.in (HFILES_NO_SRCDIR): Remove reference to
2566 2013-08-09 Pedro Alves <palves@redhat.com>
2568 * tracepoint.c (tfile_start): Show tilde-expanded filename in
2571 2013-08-09 Pedro Alves <palves@redhat.com>
2573 * breakpoint.c (save_breakpoints): Show tilde-expanded filename in
2576 2013-08-09 Pedro Alves <palves@redhat.com>
2578 * gcore.c (create_gcore_bfd): Don't use tilde_expand here.
2579 (gcore_command): Use tilde_expand here, and when showing the
2580 filename to the user, show the expanded version.
2582 2013-08-09 Yao Qi <yao@codesourcery.com>
2584 * stack.c (read_frame_arg): Set 'entryval_error' to NULL if
2587 2013-08-08 Azat Khuzhin <a3at.mail@gmail.com> (tiny change)
2589 * gcore.c (create_gcore_bfd): Use tilde_expand.
2591 2013-08-08 Yao Qi <yao@codesourcery.com>
2593 * frame.h (read_frame_local): Declare.
2594 * mi/mi-cmd-stack.c (list_args_or_locals): Call
2596 * stack.c (read_frame_local): New.
2598 2013-08-08 Yao Qi <yao@codesourcery.com>
2600 * mi/mi-cmd-stack.c: Update comments to function
2601 list_args_or_locals.
2603 2013-08-07 Tom Tromey <tromey@redhat.com>
2606 * dwarf2read.c (struct process_psymtab_comp_unit_data): New.
2607 (process_psymtab_comp_unit_reader): Use it.
2608 (process_psymtab_comp_unit): Update. Add "pretend_language"
2610 (dwarf2_build_psymtabs_hard): Update.
2611 (scan_partial_symbols): Pass CU's language to
2612 process_psymtab_comp_unit.
2614 2013-08-07 Tom Tromey <tromey@redhat.com>
2616 * dwarf2read.c (dw2_get_primary_filename_reader): Remove.
2617 (dwarf2_gdb_index_functions): Update.
2618 * psymtab.c (find_symbol_file_from_partial): Remove.
2619 (psym_functions): Update.
2620 * symfile.h (struct quick_symbol_functions) <find_symbol_file>:
2623 2013-08-07 Tom Tromey <tromey@redhat.com>
2625 * symfile.c (set_initial_language): Look up "main" symbol
2626 and use its language.
2627 * symtab.c (find_main_filename): Remove.
2628 * symtab.h (find_main_filename): Remove.
2630 2013-08-07 Tom Tromey <tromey@redhat.com>
2632 * dwarf2read.c (recursively_compute_inclusions): Add
2633 "immediate_parent" argument. Set symtab's "user" field
2635 (compute_symtab_includes): Update.
2637 2013-08-07 Tom Tromey <tromey@redhat.com>
2639 * linespec.c (convert_linespec_to_sals): Use maybe_add_address
2640 when adding label symbols.
2642 2013-08-07 Raunaq Bathija <raunaq12@in.ibm.com>
2643 Ulrich Weigand <uweigand@de.ibm.com>
2645 * configure.tgt (powerpc64-*-aix*): Match powerpc64 running aix.
2646 * configure.host (powerpc64-*-aix*): Likewise.
2648 2013-08-07 Raunaq Bathija <raunaq12@in.ibm.com>
2649 Ulrich Weigand <uweigand@de.ibm.com>
2651 * gdb_ptrace.h: Use ptrace64 instead of ptrace if HAVE_PTRACE64
2653 * rs6000-nat.c: Check for __ld_info64_ if compiling 64 BIT gdb.
2654 (rs6000_ptrace32): Call ptrace64 instead of ptrace if present.
2655 (rs6000_ptrace64): Call ptace64 instead of ptracex if present.
2656 * configure.ac: Check for ptrace64.
2657 * configure, config.in: Regenerate.
2659 2013-08-07 Raunaq Bathija <raunaq12@in.ibm.com>
2660 Ulrich Weigand <uweigand@de.ibm.com>
2662 * aixthread.c: Call ptrace64 instead of ptracex if defined.
2663 Call ptrace64 instead of ptrace if defined.
2664 Add macro addr_ptr to take care of ptrace address argument.
2665 (pdc_read_regs): Likewise.
2666 (pdc_write_regs): Likewise.
2667 (aix_thread_resume): Likewise.
2668 (fetch_regs_kernel_thread): Likewise.
2669 (store_regs_kernel_thread): Likewise.
2671 2013-08-07 Anton Blanchard <anton@samba.org>
2673 * MAINTAINERS: Add myself to Write After Approval.
2675 2013-08-05 Tom Tromey <tromey@redhat.com>
2677 * aix-thread.c (_initialize_aix_thread): Use
2678 complete_target_initialization.
2679 * bsd-uthread.c (_initialize_bsd_uthread): Use
2680 complete_target_initialization.
2681 * dec-thread.c (_initialize_dec_thread): Use
2682 complete_target_initialization.
2683 * ravenscar-thread.c (_initialize_ravenscar): Use
2684 complete_target_initialization.
2685 * sol-thread.c (_initialize_sol_thread): Use
2686 complete_target_initialization.
2687 * spu-multiarch.c (_initialize_spu_multiarch): Use
2688 complete_target_initialization.
2690 2013-08-05 Tom Tromey <tromey@redhat.com>
2692 * ada-exp.y (write_var_or_type): Use bound_minimal_symbol.
2693 * ada-lang.c (ada_lookup_simple_minsym): Return
2694 bound_minimal_symbol.
2695 * ada-lang.h (ada_lookup_simple_minsym): Update.
2696 * c-exp.y (variable): Use lookup_bound_minimal_symbol.
2697 * f-exp.y (variable): Use lookup_bound_minimal_symbol.
2698 * go-exp.y (variable): Use lookup_bound_minimal_symbol.
2699 * jv-exp.y (push_expression_name): Use lookup_bound_minimal_symbol.
2700 * m2-exp.y (variable): Use lookup_bound_minimal_symbol.
2701 * minsyms.c (msymbol_objfile): Remove.
2702 (lookup_minimal_symbol_internal): New function, from
2703 lookup_minimal_symbol.
2704 (lookup_minimal_symbol): Rewrite using
2705 lookup_minimal_symbol_internal.
2706 (lookup_bound_minimal_symbol): New function.
2707 * minsyms.h (msymbol_objfile): Remove.
2708 (lookup_bound_minimal_symbol): Declare.
2709 * p-exp.y (variable): Use lookup_bound_minimal_symbol.
2710 * parse.c (write_exp_msymbol): Change parameter to a
2711 bound_minimal_symbol.
2712 (write_dollar_variable): Use lookup_bound_minimal_symbol.
2713 * parser-defs.h (write_exp_msymbol): Update.
2714 * printcmd.c (address_info): Use lookup_bound_minimal_symbol.
2715 * symfile.c (simple_read_overlay_table): Use
2716 lookup_bound_minimal_symbol.
2717 * symtab.c (skip_prologue_sal): Don't use msymbol_objfile.
2718 (search_symbols): Likewise.
2719 (print_msymbol_info): Take a bound_minimal_symbol argument.
2720 (symtab_symbol_info, rbreak_command): Update.
2721 * symtab.h (struct symbol_search) <msymbol>: Change type
2722 to bound_minimal_symbol.
2723 * valops.c (find_function_in_inferior): Use
2724 lookup_bound_minimal_symbol.
2725 * value.c (value_fn_field): Use lookup_bound_minimal_symbol.
2727 2013-08-05 Jan Kratochvil <jan.kratochvil@redhat.com>
2730 * remote.c (cleanup_sigint_signal_handler): Rename the declaration
2732 (async_cleanup_sigint_signal_handler): ... this.
2733 (initialize_sigint_signal_handler): Remove declaration.
2734 (handle_remote_sigint): Rename the declaration to ...
2735 (async_handle_remote_sigint): ... this.
2736 (handle_remote_sigint_twice): Rename the declaration to ...
2737 (async_handle_remote_sigint_twice): ... this.
2738 (async_remote_interrupt, async_remote_interrupt_twice)
2739 (remote_interrupt): Remove the declarations.
2740 (remote_interrupt_twice): Rename the declaration ...
2741 (sync_remote_interrupt_twice): ... this.
2742 (sigint_remote_twice_token): Rename the variable to ...
2743 (async_sigint_remote_twice_token): ... this.
2744 (sigint_remote_token): Rename the variable to ...
2745 (async_sigint_remote_token): ... this.
2746 (initialize_sigint_signal_handler): Rename the function to ...
2747 (async_initialize_sigint_signal_handler): ... this. Update the name
2749 (handle_remote_sigint): Rename the function to ...
2750 (async_handle_remote_sigint): ... this. Update the names inside.
2751 (handle_remote_sigint_twice): Rename the function to ...
2752 (async_handle_remote_sigint_twice): ... this. Update the names inside.
2753 (cleanup_sigint_signal_handler): Rename the function to ...
2754 (async_cleanup_sigint_signal_handler): ... this.
2755 (remote_interrupt): Rename the function to ...
2756 (sync_remote_interrupt): this. Update the names inside.
2757 (remote_interrupt_twice): Rename the function to ...
2758 (sync_remote_interrupt_twice): this. Update the names inside.
2759 (remote_terminal_inferior, remote_terminal_ours, remote_wait_as)
2760 (_initialize_remote): Update the names inside.
2762 2013-08-02 Tom Tromey <tromey@redhat.com>
2765 * breakpoint.c (update_watchpoint, watchpoint_check)
2766 (watch_command_1): Update.
2767 * eval.c (fetch_subexp_value): Add "preserve_errors"
2769 * ppc-linux-nat.c (check_condition): Update.
2770 * value.h (fetch_subexp_value): Update.
2772 2013-08-02 Andrew Burgess <aburgess@broadcom.com>
2774 * mi/mi-interp.c (mi_interpreter_resume): Remove call to
2777 2013-08-01 Doug Evans <dje@google.com>
2780 * dwarf2read.c (struct dwarf2_per_cu_data): New member tu_read.
2781 (fill_in_sig_entry_from_dwo_entry): Reorganize asserts.
2782 Add assert of sig_entry->dwo_unit == NULL.
2783 (lookup_dwo_signatured_type): Don't assign TU to a DWO if the TU
2784 had already been read.
2785 (read_signatured_type): Set per_cu.tu_read.
2788 * valops.c (value_struct_elt): Add missing call to check_typedef.
2789 (value_find_oload_method_list): Ditto.
2791 * symtab.c (do_free_search_symbols_cleanup): Change arg to,
2792 effectively, struct symbol_search **.
2793 (make_cleanup_free_search_symbols): Change arg to struct
2794 symbol_search **. All callers updated.
2795 (compare_search_syms): Compare symtab file name and block as well.
2796 (search_symbols_equal): New function.
2797 (sort_search_symbols_remove_dups): Renamed from sort_search_symbols.
2798 New args new_head, new_tail. Result is now void. Remove dups after
2799 sorting the symbols.
2800 (search_symbols): Sort all found symbols once, after all have been
2801 found, and remove duplicates. Simplify cleanup tracking of result.
2802 * symtab.h (make_cleanup_free_search_symbols): Update prototype.
2804 Further workarounds for binutils/15021.
2805 * dwarf2read.c (recursively_compute_inclusions): Change type of result
2806 parameter to VEC (symtab_ptr) **. New parameter all_type_symtabs.
2807 Watch for duplicate symtabs coming from type units.
2808 (compute_symtab_includes): Update call to
2809 recursively_compute_inclusions. Build vector of included symtabs
2811 * symtab.h (symtab_ptr): New typedef.
2812 (DEF_VEC_P (symtab_ptr)): New VEC type.
2813 * linespec.c (symtab_p): Delete. All uses updated to use symtab_ptr
2816 2013-08-01 Andrew Burgess <aburgess@broadcom.com>
2818 * cli/cli-script.c (script_from_file): Remove use of
2820 * main.c (captured_main): Remove use of error_pre_print and
2822 * utils.c (error_pre_print, quit_pre_print): Remove.
2823 * utils.h (error_pre_print, quit_pre_print): Likewise.
2825 2013-08-01 Yao Qi <yao@codesourcery.com>
2827 * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Parse argv
2829 (mi_cmd_stack_list_variables): Likewise.
2831 2013-07-31 Andrew Burgess <aburgess@broadcom.com>
2833 * exceptions.c (deprecated_throw_reason): Remove.
2834 * exceptions.h (deprecated_throw_reason): Remove.
2836 2013-07-31 Andrew Burgess <aburgess@broadcom.com>
2838 * remote-mips.c (mips_error): Replace use of
2839 deprecated_throw_reason with throw_verror. Use the error message
2840 passed to mips_error as the error message for throw_verror.
2842 2013-07-31 Andrew Burgess <aburgess@broadcom.com>
2844 * monitor.c (monitor_interrupt_query): Replace use of
2845 deprecated_throw_reason with quit.
2846 * nto-procfs.c (interrupt_query): Likewise.
2847 * remote-fileio.c (remote_fileio_sig_exit): Likewise.
2848 * remote-mips.c (mips_kill): Likewise.
2849 * remote.c (interrupt_query): Likewise.
2851 2013-07-31 Andrew Burgess <aburgess@broadcom.com>
2853 * utils.c (internal_verror): Replace use of deprecated_throw_reason
2856 2013-07-31 Pedro Alves <pedro@codesourcery.com>
2857 Yao Qi <yao@codesourcery.com>
2859 * tracepoint.c (trace_dump_command): Select the current frame.
2861 2013-07-30 Doug Evans <dje@google.com>
2863 * dwarf2read.c (process_queue): Add type signature to debug output.
2865 2013-07-30 Andrew Burgess <aburgess@broadcom.com>
2867 * value.c (value_fetch_lazy): Mark optimized out values as such
2868 rather than raising an error.
2870 2013-07-30 Andrew Burgess <aburgess@broadcom.com>
2872 * value.c (value_fetch_lazy): Ensure parent value is not lazy
2873 before checking which bits of the parent, not the child, value are
2876 2013-07-30 Muhammad Bilal <mbilal@codesorcery.com>
2879 * top.c: Include "filenames.h".
2880 (set_history_filename): New function.
2881 (init_main): Install it as set hook of the "set history filename"
2884 2013-07-30 Sanimir Agovic <sanimir.agovic@intel.com>
2886 * dwarf2read.c (dwarf2_get_ref_die_offset): Constify struct
2887 attribute parameter.
2888 (dwarf2_const_value_data): Constify struct attribute parameter.
2889 (dwarf2_const_value): Constify struct attribute parameter.
2890 (dwarf2_const_value_attr): Constify struct attribute parameter.
2891 (lookup_die_type): Constify struct attribute parameter.
2892 (dwarf2_get_attr_constant_value): Constify struct attribute parameter.
2893 (follow_die_ref_or_sig): Constify struct attribute parameter.
2894 (follow_die_ref): Constify struct attribute parameter.
2895 (follow_die_sig): Constify struct attribute parameter.
2896 (get_DW_AT_signature_type): Constify struct attribute parameter.
2897 (get_type_unit_group): Constify struct attribute parameter.
2898 (fill_in_loclist_baton): Constify struct attribute parameter.
2899 (dwarf2_symbol_mark_computed): Constify struct attribute parameter.
2900 (type_unit_group): Constify struct attribute parameter.
2902 2013-07-30 Sanimir Agovic <sanimir.agovic@intel.com>
2904 * dwarf2read.c (attr_form_is_block): Make argument const.
2905 (attr_form_is_section_offset): Make argument const.
2906 (attr_form_is_constant): Make argument const.
2907 (attr_form_is_ref): Make argument const.
2909 2013-07-30 Sanimir Agovic <sanimir.agovic@intel.com>
2911 * dwarf2read.c (attr_is_ref): Rename to attr_form_is_ref.
2913 (attr_form_is_ref): Moved below attr_form_is_constant.
2915 2013-07-29 Doug Evans <dje@google.com>
2917 * main.c (captured_command_loop): Tweak comment.
2919 * target.c (target_async_permitted_1): Fix comment.
2921 * symtab.c (iterate_over_some_symtabs): Add comment.
2923 * symtab.c (iterate_over_some_symtabs): Fix indentation.
2925 2013-07-27 Yao Qi <yao@codesourcery.com>
2927 * NEWS: Mention that GDBserver now supports hardware
2928 watchpoints on the MIPS GNU/Linux target.
2930 2013-07-27 Yao Qi <yao@codesourcery.com>
2932 * Makefile.in (HFILES_NO_SRCDIR): Add
2933 common/mips-linux-watch.h.
2934 (mips-linux-watch.o): New rule.
2935 * common/mips-linux-watch.c: New.
2936 * common/mips-linux-watch.h: New.
2937 * config/mips/linux.mh (NATDEPFILES): Add mips-linux-watch.o
2938 * mips-linux-nat.c: Include mips-linux-watch.h.
2939 (W_BIT, R_BIT, I_BIT, W_MASK, R_MASK, I_MASK, IRW_MASK): Move
2940 to common/mips-linux-watch.h.
2941 (MAX_DEBUG_REGISTER): Likewise.
2942 (enum pt_watch_style): Likewise.
2943 (struct mips32_watch_regs): Likewise.
2944 (struct mips64_watch_regs): Likewise.
2945 (struct pt_watch_regs): Likewise.
2946 (struct mips_watchpoint): Likewise.
2947 (mips_linux_watch_get_irw_mask): Move to
2948 common/mips-linux-watch.c.
2949 (get_reg_mask, mips_linux_watch_get_num_valid): Likewise.
2950 (mips_linux_watch_get_watchlo): Likewise.
2951 (mips_linux_watch_set_watchlo): Likewise.
2952 (mips_linux_watch_get_watchhi): Likewise.
2953 (mips_linux_watch_set_watchhi): Likewise.
2954 (mips_linux_read_watch_registers): Likewise.
2955 (mips_linux_watch_type_to_irw): Likewise.
2956 (mips_linux_stopped_data_address, fill_mask): Likewise.
2957 (mips_linux_watch_try_one_watch): Likewise.
2958 (mips_linux_watch_populate_regs): Likewise.
2960 2013-07-27 Yao Qi <yao@codesourcery.com>
2962 * mips-linux-nat.c (get_irw_mask): Rename to ...
2963 (mips_linux_watch_get_irw_mask): ... this. Rename parameter
2964 'set' to 'n'. Update function comment. All callers changed.
2965 (get_reg_mask): Rename parameter 'set' to 'n'. Update
2966 function comment. All callers changed.
2967 (get_num_valid): Rename to ...
2968 (mips_linux_watch_get_num_valid): ... this. Rename parameter
2969 'set' to 'n'. Update function comment. All callers changed.
2970 (get_watchlo): Rename to ...
2971 (mips_linux_watch_get_watchlo): ... this. Rename parameter
2972 'set' to 'n'. Update function comment. All callers changed.
2973 (set_watchlo): Rename to ...
2974 (mips_linux_watch_set_watchlo): ... this. Rename parameter
2975 'set' to 'n'. Update function comment. All callers changed.
2976 (get_watchhi): Rename to ...
2977 (mips_linux_watch_get_watchhi): ... this. Update function
2978 comment. All callers changed.
2979 (set_watchhi): Rename to ...
2980 (mips_linux_watch_set_watchhi): ... this. Update function
2981 comment. All callers changed.
2982 (mips_linux_read_watch_registers): Update function comment.
2983 Add new parameters 'lwpid', 'watch_readback', and
2984 'watch_readback_valid'. Update.
2985 (type_to_irw): Rename to ...
2986 (mips_linux_watch_type_to_irw): ... this. Update function
2987 comment. All callers changed.
2988 (fill_mask): Update function comment.
2989 (try_one_watch): Rename to ...
2990 (mips_linux_watch_try_one_watch): ... this. Change the type
2991 of parameter 'irw' from 'unsigned' to 'uint32_t'.
2992 (populate_regs_from_watches): Rename to ...
2993 (mips_linux_watch_populate_regs): ... this. Add parameter
2994 'current_watches'. All callers changed.
2996 2013-07-27 Yao Qi <yao@codesourcery.com>
2998 * mips-linux-nat.c (MAX_DEBUG_REGISTER): Move it earlier in
3000 (PTRACE_SET_WATCH_REGS, enum pt_watch_style): Remove.
3001 (struct mips32_watch_regs, struct mips64_watch_regs): Remove.
3002 (struct pt_watch_regs): Likewise.
3003 [!PTRACE_GET_WATCH_REGS] (PTRACE_SET_WATCH_REGS): New macro.
3004 [!PTRACE_GET_WATCH_REGS] (enum pt_watch_style): New.
3005 [!PTRACE_GET_WATCH_REGS] (struct mips32_watch_regs): New.
3006 [!PTRACE_GET_WATCH_REGS] (struct mips64_watch_regs): New.
3007 [!PTRACE_GET_WATCH_REGS] (struct pt_watch_regs): New.
3009 2013-07-27 Yao Qi <yao@codesourcery.com>
3011 * breakpoint.h: Include break-common.h.
3012 (enum target_hw_bp_type): Move to ...
3013 * common/break-common.h: ... here. New.
3015 2013-07-26 Cyril Nikolaev <cyril@nichtverstehen.de>
3017 * inflow.c (terminal_init_inferior_with_pgrp): Save inferior
3018 process group regardless of having tty on stdin.
3020 2013-07-25 Doug Evans <dje@google.com>
3022 * linux-fork.h (detach_fork): Delete.
3024 2013-07-25 Tom Tromey <tromey@redhat.com>
3026 PR remote/15256, PR remote/15266:
3027 * bfd-target.c (target_bfd_reopen): Initialize to_magic.
3028 * monitor.c (monitor_detach): Use unpush_target.
3029 * remote-m32r-sdi.c (m32r_detach): Use unpush_target.
3030 * remote-mips.c (mips_detach): Use unpush_target. Don't
3032 * remote-sim.c (gdbsim_detach): Use unpush_target.
3033 * target.c (pop_target): Remove.
3034 (pop_all_targets_above): Don't call target_close.
3035 (target_close): Assert that the target is unpushed.
3036 * target.h (pop_target): Don't declare.
3037 * tracepoint.c (tfile_open): Use unpush_target.
3039 2013-07-25 Tom Tromey <tromey@redhat.com>
3041 * linux-thread-db.c (init_thread_db_ops): Call
3042 complete_target_initialization.
3043 (_initialize_thread_db): Don't call add_target.
3044 * target.c (complete_target_initialization): New function.
3045 (add_target_with_completer): Call it.
3046 * target.h (complete_target_initialization): Declare.
3048 2013-07-25 Mark Kettenis <kettenis@gnu.org>
3050 * hppa-tdep.h (enum hppa_regnum): Add members for all space registers.
3051 * hppaobsd-tdep.c (HPPAOBSD_SIZEOF_GREGS): Add comment.
3052 (HPPANBSD_SIZEOF_GREGS): New define.
3053 (hppaobsd_supply_gregset): Handle additional registers.
3054 * hppabsd-nat.c (hppabsd_gregset_supplies_p): Adjust to indicate
3055 we provide more registers now.
3056 (hppabsd_supply_gregset): Supply additional registers.
3057 (hppabsd_collect_gregset): Collect additional registers.
3059 2013-07-25 Mark Kettenis <kettenis@gnu.org>
3061 * hppabsd-tdep.c: Include "dwarf2-frame.h".
3062 (hppabsd_dwarf2_frame_init_reg): New function.
3063 (hppabsd_init_abi): Hook in the DWARF CFI frame unwinder.
3065 2013-07-25 Andrew Burgess <aburgess@broadcom.com>
3067 * mi/mi-main.c (output_register): Make MI 'r' format use standard
3068 'z' format code. Remove error for optimized out values, standard
3069 code will handle these fine.
3071 2013-07-25 Andrew Burgess <aburgess@broadcom.com>
3073 * NEWS: Mention new 'z' formatter.
3074 * printcmd.c (print_scalar_formatted): Add new 'z' formatter.
3075 (_initialize_printcmd): Mention 'z' formatter in help text of the
3078 2013-07-24 Maciej W. Rozycki <macro@codesourcery.com>
3080 * mips-tdep.c (micromips_deal_with_atomic_sequence): Correct
3083 2013-07-24 Sergio Durigan Junior <sergiodj@redhat.com>
3085 * breakpoint.c (create_longjmp_master_breakpoint): Check if probe
3086 interface can evaluate arguments. Fallback to the old mode if it
3088 (create_exception_master_breakpoint): Likewise.
3089 * elfread.c (elf_can_evaluate_probe_arguments): New function.
3090 (struct sym_probe_fns elf_probe_fns): Export function above to the
3092 * probe.c (can_evaluate_probe_arguments): New function.
3093 * probe.h (struct probe_ops) <can_evaluate_probe_arguments>: New
3095 (can_evaluate_probe_arguments): New function prototype.
3096 * solib-svr4.c (svr4_create_solib_event_breakpoints): Check if
3097 probe interface can evaluate arguments. Fallback to the old mode
3099 * stap-probe.c (stap_get_probe_argument_count): Check if probe
3100 interface can evaluate arguments. Warning the user if it cannot.
3101 (stap_can_evaluate_probe_arguments): New function.
3102 (struct probe_ops stap_probe_ops): Export function above to the
3104 * symfile.h (struct sym_probe_fns) <can_evaluate_probe_arguments>:
3105 New function pointer.
3107 2013-07-24 Luis Machado <lgustavo@codesourcery.com>
3109 * Makefile.in (SFILES): Add common/target-common.c.
3110 Add common/target-common.h to headers.
3111 (COMMON_OBS): Add target-common.o.
3112 (target-common.o): New target.
3113 * linux-nat.h (resume_kind): Move to common/target-common.h.
3114 * target.c (target_waitstatus_to_string): Move to
3115 common/target-common.c.
3116 * target.h: Include target-common.h.
3117 (target_waitkind): Move to common/target-common.h.
3118 (target_waitstatus): Likewise.
3119 (TARGET_WNOHANG): Likewise.
3120 * common/target-common.c: New file.
3121 * common/target-common.h: New file.
3123 2013-07-24 Doug Evans <dje@google.com>
3125 * dwarf2read.c (lookup_dwo_cutu): Change missing DWO complaint to
3128 2013-07-23 Yao Qi <yao@codesourcery.com>
3130 * i386-tdep.c (i386_in_stack_tramp_p): Remove unused
3131 parameter 'gdbarch'.
3132 (i386_stack_tramp_frame_sniffer): Caller update.
3133 * i386-linux-tdep.c (i386_linux_core_read_xcr0): Remove
3134 parameter 'gdbarch' and 'target'.
3135 (i386_linux_core_read_description): Caller update.
3136 * amd64-linux-tdep.c (amd64_linux_core_read_description):
3138 * i386-linux-tdep.h (i386_linux_core_read_xcr0): Update
3141 2013-07-23 Tom Tromey <tromey@redhat.com>
3143 * dwarf2read.c (init_cutu_and_read_dies): Revert patch from
3146 2013-07-22 Doug Evans <dje@google.com>
3148 * exec.h (remove_target_sections): Delete arg abfd.
3149 * exec.c (exec_close): Update call to remove_target_sections.
3150 (remove_target_sections): Delete arg abfd.
3151 * solib.c (update_solib_list): Ditto.
3152 (reload_shared_libraries_1): Ditto.
3153 (clear_solib): Ditto, and unconditionally call remove_target_sections.
3154 * target.h (struct target_section): Rename key to owner.
3157 2013-07-22 Tom Tromey <tromey@redhat.com>
3159 * solib-som.c (som_open_symbol_file_object): Call do_cleanups.
3161 2013-07-22 Tom Tromey <tromey@redhat.com>
3163 * dwarf2read.c (init_cutu_and_read_dies): Remove 'free_cu_cleanup'.
3164 Simplify cleanup handling.
3166 2013-07-22 Tom Tromey <tromey@redhat.com>
3168 * dwarf2read.c (dwarf_decode_line_header): Call do_cleanups
3169 on all return paths.
3171 2013-07-22 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
3173 * ppc-linux-nat.c (PPC_DEBUG_FEATURE_DATA_BP_DAWR): New define.
3174 (ppc_linux_region_ok_for_hw_watchpoint): Add checking to use the new
3175 DAWR interface for longer ranges hardware watchpoint (up to 512 bytes).
3177 2013-07-22 Phil Muldoon <pmuldoon@redhat.com>
3179 * top.c (print_gdb_version): Add help, apropos description and
3180 url to online documentation.
3182 2013-07-19 Hui Zhu <hui@codesourcery.com>
3185 * mi/mi-cmd-break.c (mi_argv_to_format): Handle double quotes.
3187 2013-07-19 Yao Qi <yao@codesourcery.com>
3189 * target.c (update_current_target): Change the default action
3190 of 'to_traceframe_info' from tcomplain to return_zero.
3191 * target.h (struct target_ops) <to_traceframe_info>: Add more
3193 * valops.c (read_value_memory): Call
3194 traceframe_available_memory unconditionally.
3196 2013-07-18 Yao Qi <yao@codesourcery.com>
3198 * coffread.c (coff_symfile_read): Iterate over minimal symbols,
3199 if the name is prefixed by "__imp_" or "_imp_", look for minimal
3200 symbol without prefix. If found, set its type to
3201 'mst_solib_trampoline'.
3203 2013-07-17 Doug Evans <dje@google.com>
3205 * NEWS: Mention "set print raw frame-arguments".
3206 * gdbcmd.h (setprintrawlist, showprintrawlist): Declare.
3207 * stack.c (print_raw_frame_arguments): New static global.
3208 (print_frame_arg): Set opts.raw from print_raw_frame_arguments.
3209 (_initialize_stack): New command "set/show print raw frame-arguments".
3210 * valprint.c (setprintrawlist, showprintrawlist): New globals.
3211 (set_print_raw, show_print_raw): New functions.
3212 (_initialize_valprint): New prefix command "set/show print raw".
3213 * valprint.h (value_print_options): Improve comments.
3215 * cli/cli-cmds.c (init_cmd_lists): Delete unnecessary initialization
3216 of all *list variables.
3218 * gdbcmd.h (togglelist): Delete.
3219 * cli/cli-cmds.c (togglelist): Delete.
3220 (init_cmd_lists): Update.
3221 * cli/cli-cmds.h (togglelist): Delete.
3223 2013-07-17 Tom Tromey <tromey@redhat.com>
3225 * dwarf2read.c (dwarf2_per_objfile_free): Clear
3228 2013-07-16 Doug Evans <dje@google.com>
3230 * nto-tdep.c (nto_relocate_section_addresses): Update,
3231 target_section.bfd deleted.
3232 * ppc64-tdep.c (ppc64_convert_from_func_ptr_addr): Ditto.
3233 * s390-tdep.c (s390_load): Ditto.
3234 * solib-aix.c (solib_aix_relocate_section_addresses): Ditto.
3236 2013-07-16 Andrew Burgess <aburgess@broadcom.com>
3238 * common/format.c (parse_format_string): Add checks for NULL
3239 character before calling strchr.
3241 2013-07-16 Doug Evans <dje@google.com>
3243 * solist.h (target_so_ops.find_and_open_solib): Clarify usage of
3244 temp_pathname argument.
3245 * nto-tdep.c (nto_find_and_open_solib): Fix setting of temp_pathname
3246 when opening the file fails.
3248 * target.h (struct target_section): Delete member bfd.
3249 All users updated to use the_bfd_section->owner instead.
3250 * exec.c (add_to_section_table): Assert bfd is expected value.
3251 Remove initialization of target_section.bfd.
3252 (remove_target_sections): Update.
3253 (section_table_available_memory): Update.
3254 (section_table_xfer_memory_partial): Update.
3255 (print_section_info): Update.
3256 (exec_set_section_address): Update.
3257 * record-full.c (record_full_core_xfer_partial): Update.
3258 * solib-svr4.c (svr4_relocate_section_addresses): Update.
3259 * solib-target.c (solib_target_relocate_section_addresses): Update.
3260 * symfile.c (build_section_addr_info_from_section_table): Update.
3261 * target.c (memory_xfer_live_readonly_partial): Update.
3262 (memory_xfer_partial_1): Update.
3264 2013-07-15 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
3266 * ppc-linux-nat.c: Since the new PowerPC specific ptrace interface is
3267 now available for embedded (BookE) and server (BookS) processors,
3268 correct mentions of 'booke' and adjust comments accordingly in order to
3269 avoid confusion. Rename struct 'booke_debug_info' to 'hwdebug_info'.
3270 (have_ptrace_booke_interface): Rename function and variable
3271 'have_ptrace_booke_interface' to 'have_ptrace_hwdebug_interface'.
3272 Rename struct 'booke_debug_info' to 'hwdebug_info'. Update all uses.
3273 (booke_cmp_hw_point): Rename function 'booke_cmp_hw_point' to
3274 'hwdebug_point_cmp'. Update all uses.
3275 (booke_find_thread_points_by_tid): Rename function
3276 'booke_find_thread_points_by_tid' to
3277 'hwdebug_find_thread_points_by_tid'. Update all uses.
3278 (booke_insert_point): Rename function 'booke_insert_point' to
3279 'hwdebug_insert_point'. Update all uses.
3280 (booke_remove_point): Rename function 'booke_remove_point' to
3281 'hwdebug_remove_point'. Update all uses.
3283 2013-07-15 Maciej W. Rozycki <macro@codesourcery.com>
3285 * mips-tdep.c (mips_gdbarch_init): Replace hardcoded magic
3286 numbers with enum values.
3288 2013-07-15 Ali Anwar <ali_anwar@codesourcery.com>
3291 * thread.c (thread_apply_all_command): Check for valid threads
3293 (thread_array_cleanup): New struct.
3294 (set_thread_refcount): New function.
3296 2013-07-11 Andrew Burgess <aburgess@broadcom.com>
3298 * infcmd.c (default_print_one_register_info): Reuse function
3301 2013-07-10 Tom Tromey <tromey@redhat.com>
3303 * Makefile.in (GDB_WARN_CFLAGS_NO_DEFS, ADA_EXP_C): New macros.
3304 (ada-exp.o): New target.
3306 2013-07-10 Sergio Durigan Junior <sergiodj@redhat.com>
3308 * mt-tdep.c (mt_registers_info): Call
3309 get_no_prettyformat_print_options instead of
3310 get_raw_print_options (regression by last patch from Doug
3313 2013-07-09 Pedro Alves <palves@redhat.com>
3315 Checked in by Joel Brobecker <brobecker@adacore.com>.
3316 * ada-lang.c (coerce_unspec_val_to_type): Use
3317 value_optimized_out_const.
3318 * value.c (value_optimized_out_const): New function.
3319 * value.h (value_optimized_out_const): New declaration.
3321 2013-07-09 Doug Evans <dje@google.com>
3323 * defs.h (enum val_prettyformat): Renamed from val_prettyprint.
3324 Enum values rename as well. All uses updated.
3325 * valprint.h (value_print_options): Rename member pretty to
3326 pretty format. Rename member prettyprint_arrays to
3327 prettyformat_arrays. Rename member prettyprint_structs to
3328 prettyformat_structs. All uses updated.
3329 (get_no_prettyformat_print_options): Renamed from
3330 get_raw_print_options.
3331 * valprint.c (get_no_prettyformat_print_options): Renamed from
3332 get_raw_print_options. All callers updated.
3333 (show_prettyformat_structs): Renamed from show_prettyprint_structs.
3334 All callers updated.
3335 (show_prettyformat_arrays): Renamed from show_prettyprint_arrays.
3336 All callers updated.
3337 (_initialize_valprint): Improve help text for "set print pretty" and
3340 2013-07-09 Andrew Burgess <aburgess@broadcom.com>
3342 * value.c (value_bits_valid): Revert previous change, and change
3343 by Pedro on 2013-07-04, due to regressions in
3344 gdb.dwarf2/implptr.exp and gdb.dwarf2/pieces.exp.
3346 2013-07-08 Andrew Burgess <aburgess@broadcom.com>
3347 Pedro Alves <palves@redhat.com>
3349 * value.c (value_bits_valid): If the value is not lval_computed
3350 or has no check validity handler then the answer is the
3351 optimized_out flag, otherwise defer to the handler.
3353 2013-07-06 Eli Zaretskii <eliz@gnu.org>
3355 * top.c (print_gdb_configuration): Explain in output of
3356 --configuration what does "relocatable" mean.
3358 * main.c (print_gdb_help): Regroup options in the --help text.
3359 See http://sourceware.org/ml/gdb-patches/2013-04/msg00362.html for
3360 the relevant discussions.
3362 2013-07-06 Yao Qi <yao@codesourcery.com>
3364 * breakpoint.h (struct breakpoint_ops) <create_breakpoints_sal>:
3365 Remove parameter 'lsal'.
3366 * breakpoint.c (create_breakpoint): Move local variable 'lsal'
3367 to inner block. Caller update.
3368 (base_breakpoint_create_breakpoints_sal): Update.
3369 (bkpt_create_breakpoints_sal): Likewise.
3370 (tracepoint_create_breakpoints_sal): Likewise.
3371 (strace_marker_create_breakpoints_sal): Get 'lsal' from the
3372 element 0 of vector 'canonical->sals'.
3374 2013-07-05 Luis Machado <lgustavo@codesourcery.com>
3376 * rs6000-tdep.c (rs6000_stab_reg_to_regnum): Return the real
3377 register number instead of the pseudo register one.
3378 (rs6000_dwarf2_reg_to_regnum): Likewise.
3380 2013-07-04 Pedro Alves <palves@redhat.com>
3382 * findvar.c (value_of_register): Use allocate_optimized_out_value
3383 if the register has been optimized out, instead of
3384 set_value_optimized_out.
3385 * frame-unwind.c (frame_unwind_got_optimized): Use
3386 allocate_optimized_out_value.
3388 2013-07-04 Pedro Alves <palves@redhat.com>
3390 * value.c (value_bits_valid): If the value is not lval_computed,
3391 or doesn't have a check_validity hook, assume the value is entirely
3394 2013-07-04 Andrew Burgess <aburgess@broadcom.com>
3396 * stack.c (read_frame_arg): No longer fetch lazy values.
3397 * value.c (value_optimized_out): If the value is not already
3398 marked optimized out, and is lazy then fetch it.
3399 (value_primitive_field): Move optimized out check to later in the
3400 function, after we have loaded any lazy values.
3401 (value_fetch_lazy): Use optimized out flag directly rather than
3402 calling optimized_out method.
3404 2013-07-04 Andrew Burgess <aburgess@broadcom.com>
3406 * valops.c: Don't include "user-regs.h".
3407 (value_fetch_lazy): Moved to value.c.
3408 * value.c: Include "user-regs.h".
3409 (value_fetch_lazy): Moved from valops.c.
3411 2013-07-04 Yao Qi <yao@codesourcery.com>
3414 2013-06-27 Yao Qi <yao@codesourcery.com>
3416 * common/create-version.sh: Update comments. Handle the case
3417 that TARGET_ALIAS is empty.
3419 2013-07-03 Pedro Alves <palves@redhat.com>
3421 * Makefile.in (config.status): Depend on development.sh.
3422 (aclocal_m4_deps): Add libmcheck.m4.
3423 * acinclude.m4: Include libmcheck.m4.
3424 * configure.ac: Source development.sh instead of setting
3425 'development' here. --enable-libmcheck/--disable-libmcheck code
3426 factored out to GDB_AC_LIBMCHECK. Run it.
3427 * development.sh: New file.
3428 * libmcheck.m4: New file.
3429 * configure: Regenerate.
3431 2013-07-02 Tom Tromey <tromey@redhat.com>
3433 * contrib/ari/update-web-ari.sh: Update for version.in change.
3435 2013-07-02 Tom Tromey <tromey@redhat.com>
3437 * common/ptid.h: Comment fixes.
3439 2013-07-01 Tom Tromey <tromey@redhat.com>
3441 * dwarf2read.c (dwarf2_get_dwz_file): Return NULL if
3442 .gnu_debugaltlink not found. Use bfd_get_alt_debug_link_info.
3443 (dwarf2_read_index, create_all_comp_units): Update.
3445 2013-07-01 Tom Tromey <tromey@redhat.com>
3447 * configure.ac (build_warnings): Add -Wold-style-definition.
3448 * configure: Rebuild.
3449 * machoread.c (_initialize_machoread): Use "(void)".
3450 * macrocmd.c (macro_inform_no_debuginfo): Fix formatting;
3453 2013-07-01 Tom Tromey <tromey@redhat.com>
3455 * configure.ac (build_warnings): Add -Wold-style-declaration.
3456 * configure: Rebuild.
3457 * dsrec.c (make_srec): Use "static const", not "const static".
3458 * h8300-tdep.c (h8300_breakpoint_from_pc): Use "static const",
3460 * mi/mi-parse.c (mi_no_values, mi_simple_values, mi_all_values):
3461 Use "static const", not "const static".
3462 * mn10300-tdep.c (mn10300_breakpoint_from_pc): Use "static const",
3464 * moxie-tdep.c (moxie_breakpoint_from_pc): Use "static const",
3466 * rs6000-tdep.c (rs6000_breakpoint_from_pc): Use "static const",
3468 * v850-tdep.c (v850_breakpoint_from_pc): Use "static const",
3470 (v850_dbtrap_breakpoint_from_pc): Likewise.
3471 * xstormy16-tdep.c (xstormy16_breakpoint_from_pc): Use "static const",
3474 2013-07-01 Tom Tromey <tromey@redhat.com>
3476 * configure.ac (build_warnings): Add -Wmissing-parameter-type.
3477 * configure: Rebuild.
3479 2013-07-01 Pedro Alves <palves@redhat.com>
3481 * defs.h: Include "pathmax.h".
3482 * utils.c: Don't include sys/param.h.
3483 (gdb_realpath): Remove code that checks for MAXPATHLEN.
3484 * solib-ia64-hpux.c (ia64_hpux_handle_load_event): Use PATH_MAX
3485 instead of MAXPATHLEN.
3486 * solib-sunos.c: Don't include sys/param.h.
3487 * xcoffread.c: Don't include sys/param.h.
3488 * bsd-kvm.c: Don't include sys/param.h.
3489 * darwin-nat.c: Don't include sys/param.h.
3490 (darwin_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
3491 * darwin-nat-info.c: Don't include sys/param.h.
3492 * fbsd-nat.c (fbsd_pid_to_exec_file): Use PATH_MAX instead of
3494 * i386obsd-nat.c: Don't include sys/param.h.
3495 * inf-child.c: Don't include sys/param.h.
3496 (inf_child_fileio_readlink): Use PATH_MAX instead of MAXPATHLEN.
3497 * linux-fork.c: Don't include sys/param.h.
3498 (fork_save_infrun_state): Use PATH_MAX instead of MAXPATHLEN.
3499 * linux-nat.c: Don't include sys/param.h.
3500 (linux_child_pid_to_exec_file, linux_proc_pending_signals)
3501 (linux_proc_pending_signals): Use PATH_MAX instead of MAXPATHLEN.
3502 * m68klinux-nat.c: Don't include sys/param.h.
3503 * nbsd-nat.c: Don't include sys/param.h.
3504 (nbsd_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
3505 * ppc-linux-nat.c: Don't include sys/param.h.
3506 * rs6000-nat.c: Don't include sys/param.h.
3507 * spu-linux-nat.c. Don't include sys/param.h.
3508 * windows-nat.c: Don't include sys/param.h.
3509 * xtensa-linux-nat.c: Don't include sys/param.h.
3510 * config/i386/nm-fbsd.h: Don't include sys/param.h.
3512 2013-07-01 Pedro Alves <palves@redhat.com>
3514 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add pathmax.
3515 * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/pathmax.m4.
3516 * gnulib/aclocal.m4: Regenerate.
3517 * gnulib/config.in: Regenerate.
3518 * gnulib/configure: Regenerate.
3519 * gnulib/import/pathmax.h: New file.
3520 * gnulib/import/Makefile.am: Regenerate.
3521 * gnulib/import/Makefile.in: Regenerate.
3522 * gnulib/import/m4/gnulib-cache.m4: Regenerate.
3523 * gnulib/import/m4/gnulib-comp.m4: Regenerate.
3524 * gnulib/import/m4/pathmax.m4: New file.
3526 2013-07-01 Pedro Alves <palves@redhat.com>
3528 * configure.ac (GDBINIT): Define, depending on host.
3529 * go32-nat.c (init_go32_ops): Don't override gdbinit here.
3530 * top.c (PATH_MAX): Delete fallback definition.
3531 (GDBINIT_FILENAME): Delete.
3532 (gdbinit): Reimplement as const char array set to the GDBINIT
3534 * top.h (gdbinit): Make const.
3535 * configure, config.in: Regenerate.
3537 2013-07-01 Pedro Alves <palves@redhat.com>
3539 * cli/cli-cmds.c (source_script): Make 'file' parameter const.
3540 * cli/cli-cmds.h (source_script): Likewise.
3541 * exceptions.c (catch_command_errors_const): New function.
3542 * exceptions.h (catch_command_errors_const): Declare.
3543 * main.c (get_init_files): Make parameters const, and adjust.
3544 (captured_main): Make 'system_gdbinit', 'home_gdbinit' and
3545 'local_gdbinit' locals const. Adjust to use
3546 catch_command_errors_const.
3547 (print_gdb_help): Make 'system_gdbinit', 'home_gdbinit' and
3548 'local_gdbinit' locals const.
3550 2013-07-01 Pedro Alves <palves@redhat.com>
3552 * defs.h: Don't check HAVE_UNISTD_H before including <unistd.h>.
3553 (STDIN_FILENO, STDOUT_FILENO, STDERR_FILENO): Delete.
3554 * tracepoint.c: Don't check HAVE_UNISTD_H before including
3557 2013-07-01 Pedro Alves <palves@redhat.com>
3559 Import the "unistd" gnulib module.
3560 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add "unistd".
3561 * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/off_t.m4,
3562 import/m4/ssize_t.m4, import/m4/sys_types_h.m4 and
3563 import/m4/unistd_h.m4.
3564 * gnulib/aclocal.m4: Renenerate.
3565 * gnulib/config.in: Renenerate.
3566 * gnulib/configure: Renenerate.
3567 * gnulib/import/Makefile.am: Renenerate.
3568 * gnulib/import/Makefile.in: Renenerate.
3569 * gnulib/import/m4/gnulib-cache.m4: Renenerate.
3570 * gnulib/import/m4/gnulib-comp.m4: Renenerate.
3571 * gnulib/import/m4/off_t.m4: New file.
3572 * gnulib/import/m4/ssize_t.m4: New file.
3573 * gnulib/import/m4/sys_types_h.m4: New file.
3574 * gnulib/import/m4/unistd_h.m4: New file.
3575 * gnulib/import/sys_types.in.h: New file.
3576 * gnulib/import/unistd.c: New file.
3577 * gnulib/import/unistd.in.h: New file.
3579 2013-07-01 Pedro Alves <palves@redhat.com>
3581 * utils.c <pathconf/_PC_PATH_MAX use>: Check if _PC_PATH_MAX is
3582 defined instead of checking HAVE_UNISTD_H.
3584 2013-07-01 Pedro Alves <palves@redhat.com>
3586 Reimport gnulib from scratch.
3587 * gnulib/Makefile.in (aclocal_m4_deps): Remove reference to
3588 import/m4/onceonly.m4.
3589 * gnulib/aclocal.m4: Renegerate.
3590 * gnulib/config.in: Renegerate.
3591 * gnulib/configure: Renegerate.
3592 * gnulib/import/Makefile.in: Renegerate.
3593 * gnulib/import/extra/update-copyright: Renegerate.
3594 * gnulib/import/m4/onceonly.m4: Delete.
3596 2013-07-01 Pedro Alves <palves@redhat.com>
3598 * tui/tui-regs.c (pagination_enabled): Delete declaration.
3600 2013-06-30 Jan Kratochvil <jan.kratochvil@redhat.com>
3603 * remote.c (async_remote_interrupt_twice): Make it static.
3604 * remote.h (async_remote_interrupt_twice): Remove the declaration.
3606 2013-06-29 Sergio Durigan Junior <sergiodj@redhat.com>
3608 * ia64-linux-tdep.c: Include <ctype.h>.
3609 (ia64_linux_stap_is_single_operand): New function.
3610 (ia64_linux_init_abi): Initialize SystemTap related attributes.
3612 2013-06-28 Tom Tromey <tromey@redhat.com>
3614 * Makefile.in (version.c): Use version.in, not
3616 * common/create-version.sh: Likewise.
3617 * common/version.in: Move...
3618 * version.in: ...here.
3620 2013-06-28 Pedro Alves <palves@redhat.com>
3622 * infrun.c (set_observer_mode): Don't declare pagination_enabled
3624 * utils.h (pagination_enabled): Declare.
3626 2013-06-28 Pedro Alves <palves@redhat.com>
3628 * infrun.c (non_stop, non_stop_1, set_non_stop, show_non_stop):
3629 Move higher up in file.
3631 2013-06-28 Tom Tromey <tromey@redhat.com>
3633 * tracepoint.c (deprecated_readline_begin_hook)
3634 (deprecated_readline_hook, deprecated_readline_end_hook): Don't
3637 2013-06-28 Pedro Alves <palves@redhat.com>
3640 * tui/tui-regs.c (tui_get_register): Fetch value contents before
3641 checking if they're available.
3642 * value.c (value_available_contents_eq): Change comment.
3643 * value.h (value_available_contents_eq): Expand comment.
3645 2013-06-27 Tom Tromey <tromey@redhat.com>
3647 * target.c (find_run_target): Remove.
3648 * target.h (find_run_target): Remove.
3650 2013-06-27 Tom Tromey <tromey@redhat.com>
3652 * corelow.c (core_gdbarch): Now static.
3654 2013-06-27 Tom Tromey <tromey@redhat.com>
3656 * target.c (target_struct_index): Remove.
3658 2013-06-27 Pedro Alves <palves@redhat.com>
3660 * infrun.c: Remove comment describing the 'stepping over runtime
3661 loader dynamic symbol resolution code' mechanism; moved to
3664 2013-06-27 Pedro Alves <palves@redhat.com>
3666 * exceptions.c (catch_command_errors): Remove spurious space.
3667 * exceptions.h (catch_command_errors): Second parameter is "arg",
3670 2013-06-27 Yao Qi <yao@codesourcery.com>
3672 * common/create-version.sh: Update comments. Handle the case
3673 that TARGET_ALIAS is empty.
3675 2013-06-26 Pedro Alves <palves@redhat.com>
3677 * infrun.c (SOLIB_IN_DYNAMIC_LINKER): Delete macro and describing
3680 2013-06-26 Pedro Alves <palves@redhat.com>
3682 * infrun.c: Update comments on stepping over runtime loader
3683 dynamic symbol resolution code.
3685 2013-06-26 Sergio Durigan Junior <sergiodj@redhat.com>
3687 * ax-gdb.h (union exp_element): Forward declare.
3688 * parser-defs.h: Include expression.h.
3690 2013-06-26 Maciej W. Rozycki <macro@codesourcery.com>
3692 * mips-tdep.c (fetch_mips_16): Use unmake_compact_addr.
3694 2013-06-26 Dmitry Kozlov <ddk@codesourcery.com>
3696 * tracepoint.c (trace_save): Extend tsave to save starttime, stoptime.
3698 2013-06-26 Dmitry Kozlov <ddk@codesourcery.com>
3700 Fix trace-status to output proper start-time and stop-time.
3701 * tracepoint.c (trace_status_command): Fix type of printf arg to
3702 prevent improper type conversion.
3703 (trace_status_mi): Likewise.
3705 2013-06-26 Maciej W. Rozycki <macro@codesourcery.com>
3707 * mips-tdep.c (mips_next_pc): Fix a typo.
3709 2013-06-26 Maciej W. Rozycki <macro@codesourcery.com>
3711 * mips-tdep.c (micromips_scan_prologue): Fix a typo.
3713 2013-06-26 Pedro Alves <pedro@codesourcery.com>
3714 Yao Qi <yao@codesourcery.com>
3716 * mi/mi-cmds.c (mi_cmds): Register -trace-frame-collected.
3717 * mi/mi-cmds.h (mi_cmd_trace_frame_collected): Declare.
3718 * mi/mi-main.c (print_variable_or_computed): New function.
3719 (mi_cmd_trace_frame_collected): New function.
3720 * tracepoint.c (find_trace_state_variable_by_number): New.
3721 (struct traceframe_info): Move to tracepoint.h
3722 (struct collection_list): Likewise.
3723 (do_collect_symbol): Include locals and arguments in the
3724 collected variables list.
3725 (clear_collection_list): Clear wholly collected variables list
3726 and computed variables list.
3727 (append_exp): New function.
3728 (encode_actions_1): Include variables in the wholly
3729 collected variables list. Include memory ranges and
3730 full-fledged expressions in the computed expressions list.
3731 (encode_actions): Move some code to ...
3732 Return the cleanup chain.
3733 (encode_actions_rsp): ... here. New function.
3734 (get_traceframe_location, get_traceframe_info): Remove static.
3735 * tracepoint.h (struct memrange): Moved from tracepoint.c.
3736 (struct collection_list): Moved from tracepoint.c. Add two
3737 new fields 'wholly_collected' and 'computed'.
3738 (find_trace_state_variable_by_number): Declare.
3739 (encode_actions): Adjust declaration.
3740 (encode_actions_rsp): Declare.
3741 (get_traceframe_info, get_traceframe_location): Declare.
3743 * NEWS: Mention new MI command -trace-frame-collected.
3745 2013-06-26 Pedro Alves <pedro@codesourcery.com>
3746 Yao Qi <yao@codesourcery.com>
3748 * ctf.c (ctf_traceframe_info): Push trace state variables
3749 present in the trace data into the traceframe info object.
3750 * breakpoint.c (DEF_VEC_I): Remove.
3751 * common/filestuff.c (DEF_VEC_I): Likewise.
3752 * dwarf2loc.c (DEF_VEC_I): Likewise.
3753 * mi/mi-main.c (DEF_VEC_I): Likewise.
3754 * common/gdb_vecs.h (DEF_VEC_I): Define vector for int.
3755 * features/traceframe-info.dtd: Add tvar element and its
3757 * tracepoint.c (free_traceframe_info): Free vector 'tvars'.
3758 (build_traceframe_info): Push trace state variables present in
3759 the trace data into the traceframe info object.
3760 (traceframe_info_start_tvar): New function.
3761 (tvar_attributes): New.
3762 (traceframe_info_children): Add "tvar" element.
3763 * tracepoint.h (struct traceframe_info) <tvars>: New field.
3765 * NEWS: Mention the change in GDB and GDBserver.
3767 2013-06-26 Pedro Alves <pedro@codesourcery.com>
3768 Yao Qi <yao@codesourcery.com>
3770 * tracepoint.c (trace_dump_command): Move code to ...
3771 (get_traceframe_location): ... here. New.
3773 2013-06-26 Pedro Alves <pedro@codesourcery.com>
3774 Yao Qi <yao@codesourcery.com>
3776 * tracepoint.c (trace_dump_command): GDB emits an error
3777 instead of a warning when a traceframe is not selected.
3779 2013-06-26 Pedro Alves <pedro@codesourcery.com>
3780 Yao Qi <yao@codesourcery.com>
3782 * tracepoint.c (tracepoint_list, stepping_list): Remove.
3783 (clear_collection_list): Free fields 'aexpre_list' and 'list'
3785 (do_clear_collection_list, init_collection_list): New.
3786 (encode_actions): Add local variables 'tracepoint_list' and
3787 'stepping_list'. Call init_collection_list and make cleanup
3788 which calls do_clear_collection_list. Don't call
3789 clear_collection_list.
3790 (_initialize_tracepoint): Delete references to
3791 'tracepoint_list' and 'stepping_list'.
3793 2013-06-25 Tom Tromey <tromey@redhat.com>
3795 * common/create-version.sh (date): Use "$", not "$$" in sed
3798 2013-06-25 Kevin Buettner <kevinb@redhat.com>
3800 * NEWS (New targets): Add entry for TI MSP430.
3802 2013-06-25 Yao Qi <yao@codesourcery.com>
3804 * remote.c (remote_start_remote): Move code to upload tsv
3807 2013-06-25 Yao Qi <yao@codesourcery.com>
3808 Hui Zhu <hui@codesourcery.com>
3809 Pedro Alves <palves@redhat.com>
3811 PR breakpoints/15075
3812 PR breakpoints/15434
3813 * breakpoint.c (bpstat_stop_status): Call
3814 b->ops->after_condition_true.
3815 (update_dprintf_command_list): Don't append "continue" command
3816 to the command list of dprintf breakpoint.
3817 (base_breakpoint_after_condition_true): New function.
3818 (base_breakpoint_ops): Add base_breakpoint_after_condition_true.
3819 (dprintf_after_condition_true): New function.
3820 (initialize_breakpoint_ops): Set dprintf_after_condition_true.
3821 * breakpoint.h (breakpoint_ops): Add after_condition_true.
3823 2013-06-24 Kevin Buettner <kevinb@redhat.com>
3825 * Makefile.in (ALL_TARGET_OBS): Add msp430-tdep.o.
3826 (ALLDEPFILES): Add msp430-tdep.c.
3827 * configure.tgt (msp430*-*-elf): New target.
3828 * msp430-tdep.c: New file.
3830 2013-06-24 Maciej W. Rozycki <macro@codesourcery.com>
3832 * mips-tdep.c (mips_elf_make_msymbol_special): Handle MIPS16 and
3833 microMIPS synthetic symbols.
3835 2013-06-24 Maciej W. Rozycki <macro@codesourcery.com>
3837 * objfiles.h (pc_in_section): New prototype.
3838 (in_plt_section): Remove name argument, replace prototype with
3839 static inline function.
3840 * mips-tdep.h: Include "objfiles.h".
3841 (in_mips_stubs_section): New function.
3842 * hppa-tdep.h (gdbarch_tdep): Remove name argument of
3843 in_solib_call_trampoline member.
3844 (hppa_in_solib_call_trampoline): Remove name argument.
3845 * objfiles.c (pc_in_section): New function.
3846 (in_plt_section): Remove function.
3847 * mips-linux-tdep.c: Include "objfiles.h".
3848 (mips_linux_in_dynsym_stub): Call in_mips_stubs_section. Remove
3849 name argument. Return 1 rather than the low 16-bit halfword of
3850 any instruction examined.
3851 (mips_linux_in_dynsym_resolve_code): Update
3852 mips_linux_in_dynsym_stub call accordingly.
3853 * mips-tdep.c (mips_stub_frame_sniffer): Use in_mips_stubs_section
3854 rather than an equivalent hand-coded sequence.
3855 * hppa-hpux-tdep.c (in_opd_section): Remove function.
3856 (hppa32_hpux_in_solib_call_trampoline): Remove name argument.
3857 (hppa64_hpux_in_solib_call_trampoline): Likewise.
3858 (hppa64_hpux_find_global_pointer): Use pc_in_section rather than
3860 * hppa-tdep.c (hppa_stub_unwind_sniffer): Remove name argument
3861 on call to tdep->in_solib_call_trampoline.
3862 (hppa_in_solib_call_trampoline): Remove name argument, update
3863 according to in_plt_section change.
3864 (hppa_skip_trampoline_code): Update according to in_plt_section
3866 * aarch64-tdep.c (aarch64_stub_unwind_sniffer): Likewise.
3867 * arm-symbian-tdep.c (arm_symbian_skip_trampoline_code):
3869 * arm-tdep.c (arm_stub_unwind_sniffer): Likewise.
3870 * hppa-linux-tdep.c (hppa_linux_find_global_pointer): Likewise.
3871 * hppabsd-tdep.c (hppabsd_find_global_pointer): Likewise.
3872 * nios2-tdep.c (nios2_stub_frame_sniffer): Likewise.
3873 * nto-tdep.c (nto_relocate_section_addresses): Likewise.
3874 * s390-tdep.c (s390_stub_frame_sniffer): Likewise.
3875 * sh-tdep.c (sh_stub_unwind_sniffer): Likewise.
3876 * solib-dsbt.c (dsbt_in_dynsym_resolve_code): Likewise.
3877 * solib-frv.c (frv_in_dynsym_resolve_code): Likewise.
3878 * solib-svr4.c (svr4_in_dynsym_resolve_code): Likewise.
3879 * solib-target.c (solib_target_in_dynsym_resolve_code): Likewise.
3880 * sparc-tdep.c (sparc_analyze_prologue): Likewise.
3881 * tic6x-tdep.c (tic6x_stub_unwind_sniffer): Likewise.
3883 2013-06-24 Joel Brobecker <brobecker@adacore.com>
3885 * common/create-version.sh: Fix expansion of $host_alias
3886 and $target_alias in generation of HOST_NAME and TARGET_NAME
3889 2013-06-24 Tom Tromey <tromey@redhat.com>
3891 * common/create-version.sh: New file.
3892 * Makefile.in (version.c): Use bfd/version.h, common/version.in,
3894 (HFILES_NO_SRCDIR): Use common/version.h.
3895 * version.in: Move to ...
3896 * common/version.in: ... here. Replace date with "DATE".
3897 * version.h: Move to ...
3898 * common/version.h: ... here.
3900 2013-06-21 Joel Brobecker <brobecker@adacore.com>
3902 * gdb/gnulib/Makefile.in: Update date in copyright header.
3903 * gdb/gnulib/configure.ac: Ditto.
3904 * gdb/gnulib/update-gnulib.sh: Ditto.
3906 2013-06-21 Joel Brobecker <brobecker@adacore.com>
3908 * copyright.py (EXCLUDE_LIST): Replace "gdb/gnulib" by
3909 "gdb/gnulib/import".
3911 2013-06-21 Will Newton <will.newton@linaro.org>
3913 * doublest.c (ldfrexp): Remove function.
3914 (convert_doublest_to_floatformat): Call frexpl instead of
3917 2013-06-21 Will Newton <will.newton@linaro.org>
3919 * gnulib/update-gnulib.sh(IMPORTED_GNULIB_MODULES): Add frexpl.
3920 * gnulib/aclocal.m4: Regenerate.
3921 * gnulib/config.in: Regenerate.
3922 * gnulib/configure: Regenerate.
3923 * gnulib/import/Makefile.am: Update.
3924 * gnulib/import/Makefile.in: Update.
3925 * gnulib/import/m4/gnulib-cache.m4: Update.
3926 * gnulib/import/m4/gnulib-comp.m4: Update.
3927 * gnulib/import/float+.h: Import.
3928 * gnulib/import/float.c: Import.
3929 * gnulib/import/float.in.h: Import.
3930 * gnulib/import/fpucw.h: Import.
3931 * gnulib/import/frexp.c: Import.
3932 * gnulib/import/frexpl.c: Import.
3933 * gnulib/import/isnan.c: Import.
3934 * gnulib/import/isnand-nolibm.h: Import.
3935 * gnulib/import/isnand.c: Import.
3936 * gnulib/import/isnanl-nolibm.h: Import.
3937 * gnulib/import/isnanl.c: Import.
3938 * gnulib/import/itold.c: Import.
3939 * gnulib/import/m4/exponentd.m4: Import.
3940 * gnulib/import/m4/exponentl.m4: Import.
3941 * gnulib/import/m4/float_h.m4: Import.
3942 * gnulib/import/m4/fpieee.m4: Import.
3943 * gnulib/import/m4/frexp.m4: Import.
3944 * gnulib/import/m4/frexpl.m4: Import.
3945 * gnulib/import/m4/isnand.m4: Import.
3946 * gnulib/import/m4/isnanl.m4: Import.
3947 * gnulib/import/m4/math_h.m4: Import.
3948 * gnulib/import/math.c: Import.
3949 * gnulib/import/math.in.h: Import.
3951 2013-06-21 Jan Kratochvil <jan.kratochvil@redhat.com>
3953 * common/linux-btrace.c (cpu_supports_btrace): Remove variable vendor,
3954 replace strcmp with signature_INTEL_ebx, signature_INTEL_ecx and
3955 signature_INTEL_edx comparisons.
3957 2013-06-20 Doug Evans <dje@google.com>
3960 * dwarf2read.c (try_open_dwop_file): New arg search_cwd.
3961 All callers updated.
3962 (open_dwp_file): If we can't find the dwp file, search the basename
3963 in debug-file-directory.
3965 * dwarf2read.c (struct dwp_file): Fix comment.
3966 (open_and_init_dwp_file): Set dwp_file->name to bfd's file name.
3968 * source.c (openp): Document OPF_TRY_CWD_FIRST+OPF_SEARCH_IN_PATH
3971 2013-06-20 Yao Qi <yao@codesourcery.com>
3973 * breakpoint.c (create_breakpoint): Fix code indentation.
3975 2013-06-20 Yao Qi <yao@codesourcery.com>
3977 * breakpoint.c (create_breakpoints_sal_default): Remove
3978 parameter 'lsal'. Update declaration.
3979 (bkpt_create_breakpoints_sal): Caller update.
3980 (tracepoint_create_breakpoints_sal): Likewise.
3982 2013-06-20 Pedro Alves <pedro@codesourcery.com>
3983 Yao Qi <yao@codesourcery.com>
3985 * NEWS: Mention the new option '--skip-unavailable' of command
3986 -data-list-register-values.
3987 * mi/mi-main.c (mi_cmd_data_list_register_values): Accept the
3988 --skip-unavailable option. Adjust to use output_register.
3989 (output_register): Add new 'skip_unavailable' parameter.
3992 2013-06-19 Mike Frysinger <vapier@gentoo.org>
3994 * Makefile.in (HFILES_NO_SRCDIR): Add common/i386-cpuid.h and
3995 common/i386-gcc-cpuid.h.
3996 * common/i386-cpuid.h: New wrapper header around i386-gcc-cpuid.h.
3997 * common/i386-gcc-cpuid.h: Rename from testsuite/gdb.arch/i386-cpuid.h.
3998 Copy the latest version from upstream gcc.
3999 * common/linux-btrace.c: Include i386-cpuid.h.
4000 (intel_supports_btrace): Delete x86 ifdefs and replace inline asm with
4002 (cpu_supports_btrace): Likewise.
4003 * go32-nat.c: Include i386-cpuid.h.
4004 (go32_sysinfo): Add (disabled) calls to i386_cpuid with comments.
4006 2013-06-19 Doug Evans <dje@google.com>
4008 * symfile.c (symfile_bfd_open): Delete unnecessary declaration.
4009 (get_section_index): Ditto.
4011 2013-06-19 Tom Tromey <tromey@redhat.com>
4013 * breakpoint.c (_initialize_breakpoint): Remove trailing \n from
4016 2013-06-18 Doug Evans <dje@google.com>
4018 * dwarf2read.c (dw2_symtab_iter_next): Check value of cu_index
4020 (dw2_expand_symtabs_matching): Fix symbol kind validity check.
4021 Move test of cu_index closer to use. Print complaint if cu_index
4024 2013-06-18 Joel Brobecker <brobecker@adacore.com>
4026 * machoread.c (oso_vector): Delete this global.
4027 (macho_register_oso): Add new parameter "oso_vector_ptr".
4028 Use it instead of the "oso_vector" global.
4029 (macho_symtab_read, macho_symfile_read_all_oso): Likewise.
4030 (macho_symfile_read): Use a local oso_vector, to be free'ed
4031 at the end of this function, in place of the old "oso_vector"
4032 global. Update various function calls accordingly. Use one
4033 single cleanup chain for the entire function.
4035 2013-06-18 Joel Brobecker <brobecker@adacore.com>
4037 * dwarf2read.c (dwarf2_per_objfile_free): Replace uses of
4038 DWARF2_PER_OBJFILE by uses of DATA instead.
4040 2013-06-18 Tom Tromey <tromey@redhat.com>
4042 * break-catch-sig.c (signal_catchpoint_explains_signal): Add 'sig'
4044 * breakpoint.c (bpstat_explains_signal): Add 'sig' argument.
4045 Special case signals other than GDB_SIGNAL_TRAP.
4046 (explains_signal_watchpoint): New function.
4047 (base_breakpoint_explains_signal): Add 'sig' argument.
4048 (initialize_breakpoint_ops): Set 'explains_signal' method for
4050 * breakpoint.h (struct breakpoint_ops) <explains_signal>: Add
4052 (bpstat_explains_signal): Likewise.
4053 * infrun.c (handle_syscall_event, handle_inferior_event): Update.
4055 2013-06-18 Tom Tromey <tromey@redhat.com>
4057 * python/py-inferior.c (gdbpy_selected_inferior): Don't incref.
4059 2013-06-18 Tom Tromey <tromey@redhat.com>
4061 * python/python.c (finish_python_initialization): Decref
4062 'pythondir' on failure path as well.
4064 2013-06-18 Tom Tromey <tromey@redhat.com>
4067 * dwarf2loc.c (read_pieced_value): Truncate this_size_bits
4068 after taking bits_to_skip into account. Sign extend byte_offset.
4069 * utils.h (gdb_sign_extend): Declare.
4070 * utils.c (gdb_sign_extend): New function.
4072 2013-06-18 Jan Kratochvil <jan.kratochvil@redhat.com>
4074 * dwarf2read.c (write_psymtabs_to_index): Ignore NULL PSYMTAB.
4076 2013-06-17 Pierre Muller <muller@sourceware.org>
4078 * corelow.c (core_open): Print GDB signal name instead of target
4081 2013-06-17 Mike Frysinger <vapier@gentoo.org>
4083 * .gitignore: Add /gcore.
4085 2013-06-13 Doug Evans <dje@google.com>
4087 * dwarf2read.c (try_open_dwop_file): Work around behaviour of
4088 OPF_TRY_CWD_FIRST to not search path if the file contains a '/'.
4090 2013-06-12 Phil Muldoon <pmuldoon@redhat.com>
4092 * stack.c (backtrace_command_1): Fix indentation.
4094 2013-06-11 Joel Brobecker <brobecker@adacore.com>
4096 * window-nat.c (thread_rec): Add missing empty line after
4097 local variable declaration.
4099 2013-06-11 Joel Brobecker <brobecker@adacore.com>
4101 * windows-nat.c (thread_rec): Revert format used to print
4102 error code returned by SuspendThread from %d back to %u.
4104 2013-06-11 Joel Brobecker <brobecker@adacore.com>
4106 * windows-nat.c (windows_continue): Add "0x" prefix for thread
4108 (get_windows_debug_event): Likewise, for all debug traces.
4110 2013-06-11 Joel Brobecker <brobecker@adacore.com>
4112 * window-nat.c (thread_rec): Add thread ID in SuspendThread
4115 2013-06-08 Pedro Alves <pedro@codesourcery.com>
4116 Yao Qi <yao@codesourcery.com>
4118 * mi/mi-main.c (get_register): Remove declaration.
4119 (output_register): Declare.
4120 (mi_cmd_data_list_register_values): Remove local variable
4121 'tuple_cleanup'. Move some code into output_register.
4122 (get_register): Renamed to ...
4123 (output_register): ... this. Output the register's
4124 "number" ui_out tuple here.
4126 2013-06-07 Pedro Alves <palves@redhat.com>
4128 * darwin-nat.c: Fix formating in copyright header.
4129 * darwin-nat.h: Likewise.
4130 * gnu-nat.c: Likewise.
4131 * machoread.c: Likewise.
4133 2013-06-07 Pedro Alves <palves@redhat.com>
4136 * regformats/regdat.sh: Output #include tdesc.h. Make globals
4137 static. Output a global target description pointer.
4138 (init_registers_${name}): Adjust to initialize a
4139 target description structure.
4141 2013-06-07 Will Newton <will.newton@linaro.org>
4143 * printcmd.c (build_address_symbolic): Call
4144 gdbarch_addr_bits_remove for text minimal symbols.
4146 2013-06-07 Will Newton <will.newton@linaro.org>
4148 * MAINTAINERS: Add myself to Write After Approval.
4150 2013-06-07 Yao Qi <yao@codesourcery.com>
4152 * tracepoint.c (start_tracing): Move code to ...
4153 (trace_reset_local_state): ... here. New.
4154 (disconnect_tracing): Don't call set_current_traceframe,
4155 set_tracepoint_num, and set_traceframe_context. Call
4156 trace_reset_local_state instead.
4157 (tfile_close): Call trace_reset_local_state.
4158 * ctf.c (ctf_close): Likewise.
4159 * remote.c (remote_close): Likewise.
4160 * tracepoint.h (trace_reset_local_state): Declare.
4162 2013-06-06 Doug Evans <dje@google.com>
4164 * dwarf2read.c: Whitespace fixes for DWP file format documentation,
4165 and fix header docs.
4167 2013-06-05 Doug Evans <dje@google.com>
4168 Keith Seitz <keiths@redhat.com>
4171 * cp-namespace.c (find_symbol_in_baseclass): Call
4172 cp_lookup_symbol_in_namespace instead of cp_lookup_symbol_namespace.
4173 Check result of call to lookup_symbol_static.
4174 Call lookup_static_symbol_aux unconditionally.
4175 Call check_typedef on base types before accessing them.
4176 (cp_lookup_nested_symbol): Fix comment.
4178 2013-06-05 Luis Machado <lgustavo@codesourcery.com>
4180 * gnu-v3-abi.c (gnuv3_skip_trampoline): Handle thunk
4181 minimal symbols pointing to function descriptors.
4183 2013-06-05 Tom Tromey <tromey@redhat.com>
4185 * python/py-utils.c (gdb_pymodule_addobject): Cast away const.
4187 2013-06-04 Sergio Durigan Junior <sergiodj@redhat.com>
4188 Pedro Alves <palves@redhat.com>
4190 * remote.c (remote_wait_as): Restore signal handler before returning
4191 when GDB gets a notification.
4193 2013-06-04 Gary Benson <gbenson@redhat.com>
4196 * breakpoint.h (handle_solib_event): Moved function declaration
4198 * breakpoint.c (handle_solib_event): Moved function to solib.c.
4199 (bpstat_stop_status): Pass new argument to handle_solib_event.
4200 * solib.h (update_solib_breakpoints): New function declaration.
4201 (handle_solib_event): Moved function declaration from
4203 * solib.c (update_solib_breakpoints): New function.
4204 (handle_solib_event): Moved function from breakpoint.c.
4205 Updated to call solib_ops->handle_event if not NULL.
4206 * solist.h (target_so_ops): New fields "update_breakpoints" and
4208 * infrun.c (set_stop_on_solib_events): New function.
4209 (_initialize_infrun): Use the above for "set
4210 stop-on-solib-events".
4211 (handle_inferior_event): Pass new argument to handle_solib_event.
4212 * solib-svr4.c (probe.h): New include.
4213 (svr4_free_library_list): New forward declaration.
4214 (probe_action): New enum.
4215 (probe_info): New struct.
4216 (probe_info): New static variable.
4217 (NUM_PROBES): New definition.
4218 (svr4_info): New fields "using_xfer", "probes_table" and
4220 (free_probes_table): New function.
4221 (free_solib_list): New function.
4222 (svr4_pspace_data_cleanup): Free probes table and solib list.
4223 (svr4_copy_library_list): New function.
4224 (svr4_current_sos_via_xfer_libraries): New parameter "annex".
4225 (svr4_read_so_list): New parameter "prev_lm".
4226 (svr4_current_sos_direct): Renamed from "svr4_current_sos".
4227 (svr4_current_sos): New function.
4228 (probe_and_action): New struct.
4229 (hash_probe_and_action): New function.
4230 (equal_probe_and_action): Likewise.
4231 (register_solib_event_probe): Likewise.
4232 (solib_event_probe_at): Likewise.
4233 (solib_event_probe_action): Likewise.
4234 (solist_update_full): Likewise.
4235 (solist_update_incremental): Likewise.
4236 (disable_probes_interface_cleanup): Likewise.
4237 (svr4_handle_solib_event): Likewise.
4238 (svr4_update_solib_event_breakpoint): Likewise.
4239 (svr4_update_solib_event_breakpoints): Likewise.
4240 (svr4_create_solib_event_breakpoints): Likewise.
4241 (enable_break): Free probes table before creating breakpoints.
4242 Use svr4_create_solib_event_breakpoints to create breakpoints.
4243 (svr4_solib_create_inferior_hook): Free the solib list.
4244 (_initialize_svr4_solib): Initialise
4245 svr4_so_ops.handle_solib_event and svr4_so_ops.update_breakpoints.
4247 2013-06-04 Gary Benson <gbenson@redhat.com>
4249 * target.h (target_ops): New field
4250 "to_augmented_libraries_svr4_read".
4251 (target_augmented_libraries_svr4_read): New macro.
4252 * target.c (update_current_target): Handle
4253 to_augmented_libraries_svr4_read.
4254 * remote.c (remote_state): New field
4255 "augmented_libraries_svr4_read".
4256 (remote_augmented_libraries_svr4_read_feature): New function.
4257 (remote_protocol_features): Add entry for
4258 "augmented-libraries-svr4-read".
4259 (remote_augmented_libraries_svr4_read): New function.
4260 (init_remote_ops): Initialize
4261 remote_ops.to_augmented_libraries_svr4_read.
4263 2013-06-04 Gary Benson <gbenson@redhat.com>
4267 2013-06-04 Gary Benson <gbenson@redhat.com>
4269 * objfiles.h (inhibit_section_map_updates): New function
4271 (resume_section_map_updates): Likewise.
4272 (resume_section_map_updates_cleanup): Likewise.
4273 * objfiles.c (objfile_pspace_info): Removed field
4274 "objfiles_changed_p". New fields "new_objfiles_available",
4275 "section_map_dirty" and "inhibit_updates".
4276 (allocate_objfile): Set new_objfiles_available.
4277 (free_objfile): Set section_map_dirty.
4278 (objfile_relocate1): Likewise.
4279 (in_plt_section): Likewise.
4280 (find_pc_section): Update the conditions under which the
4281 section map will be updated.
4282 (inhibit_section_map_updates): New function.
4283 (resume_section_map_updates): Likewise.
4284 (resume_section_map_updates_cleanup): Likewise.
4286 2013-06-04 Gary Benson <gbenson@redhat.com>
4288 * probe.h (get_probe_argument_count): New declaration.
4289 (evaluate_probe_argument): Likewise.
4290 * probe.c (get_probe_argument_count): New function.
4291 (evaluate_probe_argument): Likewise.
4292 (probe_safe_evaluate_at_pc): Use the above new functions.
4294 2013-06-04 Alan Modra <amodra@gmail.com>
4296 * ppc-tdep.h (ppc_insns_match_pattern): Update prototype.
4297 * rs6000-tdep.c (read_insn): Add frame param, don't assume big-endian.
4298 (ppc_insns_match_pattern): Add frame param. Avoid multiple
4299 target mem reads on optional insns.
4300 * ppc-linux-tdep.c (ppc_skip_trampoline_code): Update
4301 ppc_insns_match_pattern calls.
4302 * ppc64-tdep.c (ppc64_standard_linkage2, ppc64_standard_linkage3):
4303 Add match for power7 thread safety insns, and new order of
4304 std 2,40(1) insn. Correct code shown for _dl_runtime_resolve
4305 invocation in comment, and update rest of comment.
4306 (PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN,
4307 PPC64_STANDARD_LINKAGE3_LEN): Delete.
4308 (ppc64_standard_linkage2_target): Update insn offsets.
4309 (ppc64_skip_trampoline_code): Use a single insn buffer. Match newer
4310 stubs first. Update calls.
4312 2013-06-04 Yao Qi <yao@codesourcery.com>
4314 * solib.c (solib_find): Don't need dir separator if path has
4317 2013-06-03 Joel Brobecker <brobecker@adacore.com>
4319 Revert (indirectly causes a SIGSEGV):
4320 * machoread.c (macho_symfile_read): Assign first cleanup to
4323 2013-06-03 Yao Qi <yao@codesourcery.com>
4325 * mi/mi-cmd-var.c (mi_no_values, mi_simple_values): Move to
4326 mi-parse.c. Make them static.
4327 (mi_all_values): Likewise.
4328 (mi_parse_values_option): Move to mi-parse.c. Rename it to
4329 mi_parse_print_values. Make it external.
4330 * mi/mi-cmds.h (mi_no_values, mi_simple_values, mi_all_values):
4331 Remove the declarations.
4332 * mi/mi-parse.c (mi_parse_print_values): Moved from mi-cmd-var.c.
4333 * mi/mi-parse.h (mi_parse_print_values): Declare.
4334 * mi/mi-cmd-stack.c: Include mi-parse.h.
4335 (parse_print_values): Remove
4336 (mi_cmd_stack_list_locals): Call mi_parse_print_values instead
4337 of parse_print_values.
4338 (mi_cmd_stack_list_args, mi_cmd_stack_list_variables): Likewise.
4340 2013-05-31 Pedro Alves <pedro@codesourcery.com>
4341 Yao Qi <yao@codesourcery.com>
4343 * tracepoint.c (all_tracepoint_actions_and_cleanup): Declare.
4344 (encode_actions): Move code to ...
4345 (all_tracepoint_actions_and_cleanup): ... here. New.
4346 (trace_dump_command): Likewise.
4348 2013-05-30 Tom Tromey <tromey@redhat.com>
4350 * symmisc.c (maintenance_expand_symtabs): Call do_cleanups.
4352 2013-05-30 Tom Tromey <tromey@redhat.com>
4354 * xml-support.c (gdb_xml_create_parser_and_cleanup): Rename from
4355 gdb_xml_create_parser_and_cleanup_1. Return a cleanup. Remove
4356 'old_chain' argument. Add 'parser_result' argument.
4357 (gdb_xml_create_parser_and_cleanup): Remove old version.
4358 (gdb_xml_parse_quick): Update.
4359 (xml_process_xincludes): Update.
4360 * xml-support.h (gdb_xml_create_parser_and_cleanup): Don't
4363 2013-05-30 Tom Tromey <tromey@redhat.com>
4365 * probe.c (collect_probes): Check arguments for NULL before
4366 calling compile_rx_or_error.
4367 * utils.c (compile_rx_or_error): Require 'rx' to be non-NULL.
4370 2013-05-30 Tom Tromey <tromey@redhat.com>
4372 * infrun.c (adjust_pc_after_break): Introduce an outer null
4375 2013-05-30 Tom Tromey <tromey@redhat.com>
4377 * mi/mi-cmd-var.c (varobj_update_one): Add an outer null cleanup.
4379 2013-05-30 Tom Tromey <tromey@redhat.com>
4381 * cli/cli-script.c (read_command_lines_1): Use a null cleanup
4382 for 'old_chain'. Do not check 'head' before processing
4385 2013-05-30 Tom Tromey <tromey@redhat.com>
4387 * mi/mi-cmd-stack.c (list_arg_or_local): Remove
4390 2013-05-30 Tom Tromey <tromey@redhat.com>
4392 * dbxread.c (dbx_read_symtab): Declare 'back_to' in a more
4393 inner scope. Unconditionally call do_cleanups.
4395 2013-05-30 Tom Tromey <tromey@redhat.com>
4397 * source.c (find_and_open_source): Call do_cleanups.
4399 2013-05-30 Tom Tromey <tromey@redhat.com>
4401 * linux-thread-db.c (thread_db_load_search): Unconditionally
4404 2013-05-30 Tom Tromey <tromey@redhat.com>
4406 * solib-aix.c (solib_aix_bfd_open): Don't use a null cleanup
4407 for 'cleanup'; instead use a later one.
4409 2013-05-30 Tom Tromey <tromey@redhat.com>
4411 * python/py-breakpoint.c (bppy_get_commands): Use
4412 explicit, unconditional return.
4413 * python/py-frame.c (frapy_read_var): Likewise.
4414 * python/python.c (gdbpy_decode_line): Likewise.
4416 2013-05-30 Tom Tromey <tromey@redhat.com>
4418 * cp-namespace.c (cp_lookup_symbol_imports_or_template): Call
4419 do_cleanups on all return paths.
4421 2013-05-30 Tom Tromey <tromey@redhat.com>
4423 * top.c (execute_command): Discard 'cleanup_if_error' cleanups.
4425 2013-05-30 Tom Tromey <tromey@redhat.com>
4427 * stabsread.c (read_struct_type): Call do_cleanups along
4430 2013-05-30 Maciej W. Rozycki <macro@codesourcery.com>
4432 * mips-linux-tdep.c: Adjust formatting throughout.
4434 2013-05-30 Tom Tromey <tromey@redhat.com>
4436 * mipsread.c (read_alphacoff_dynamic_symtab): Call do_cleanups
4437 along all return paths.
4439 2013-05-30 Tom Tromey <tromey@redhat.com>
4441 * symfile.c (find_separate_debug_file): Call do_cleanups
4442 along all return paths.
4444 2013-05-30 Tom Tromey <tromey@redhat.com>
4446 * symtab.c (search_symbols): Introduce a null cleanup for
4449 2013-05-30 Tom Tromey <tromey@redhat.com>
4451 * python/py-value.c (valpy_binop): Call do_cleanups before
4454 2013-05-30 Tom Tromey <tromey@redhat.com>
4456 * python/py-prettyprint.c (print_children): Remove extra
4459 2013-05-30 Tom Tromey <tromey@redhat.com>
4461 * python/py-frame.c (frapy_read_var): Call do_cleanups along
4464 2013-05-30 Tom Tromey <tromey@redhat.com>
4466 * python/py-breakpoint.c (bppy_get_commands): Call do_cleanups
4467 along all return paths.
4469 2013-05-30 Tom Tromey <tromey@redhat.com>
4471 * cli/cli-logging.c (set_logging_redirect): Unconditionally
4474 2013-05-30 Tom Tromey <tromey@redhat.com>
4476 * varobj.c (c_value_of_root): Call do_cleanups along all
4479 2013-05-30 Tom Tromey <tromey@redhat.com>
4481 * tracepoint.c (trace_dump_command): Unconditionally call
4484 2013-05-30 Tom Tromey <tromey@redhat.com>
4486 * breakpoint.c (output_thread_groups, parse_cmd_to_aexpr): Call
4487 do_cleanups earlier.
4489 2013-05-30 Tom Tromey <tromey@redhat.com>
4491 * machoread.c (macho_symfile_read): Assign first cleanup to
4494 2013-05-30 Tom Tromey <tromey@redhat.com>
4496 * m32r-rom.c (m32r_load): Call do_cleanups at all returns.
4498 2013-05-30 Tom Tromey <tromey@redhat.com>
4500 * mi/mi-main.c (list_available_thread_groups): Call do_cleanups.
4502 2013-05-30 Tom Tromey <tromey@redhat.com>
4504 * inf-ptrace.c (inf_ptrace_create_inferior): Unconditionally
4505 call discard_cleanups.
4506 (inf_ptrace_attach): Likewise.
4508 2013-05-30 Tom Tromey <tromey@redhat.com>
4510 * remote-mips.c (mips_exit_debug): Call do_cleanups on all
4512 (mips_initialize): Likewise.
4513 (common_open): Call do_cleanups.
4515 2013-05-30 Tom Tromey <tromey@redhat.com>
4517 * utils.c (internal_vproblem): Call do_cleanups.
4519 2013-05-30 Tom Tromey <tromey@redhat.com>
4521 * linespec.c (find_linespec_symbols): Don't reassign to 'cleanup'.
4523 2013-05-30 Tom Tromey <tromey@redhat.com>
4525 * cli/cli-script.c (setup_user_args): Don't return after error.
4527 2013-05-30 Tom Tromey <tromey@redhat.com>
4529 * somread.c (som_symtab_read): Call do_cleanups.
4531 2013-05-30 Tom Tromey <tromey@redhat.com>
4533 * printcmd.c (print_command_1): Unconditionally call do_cleanups.
4535 2013-05-30 Tom Tromey <tromey@redhat.com>
4537 * cli/cli-cmds.c (cd_command, alias_command): Call do_cleanups.
4538 * cli/cli-dump.c (restore_binary_file): Call do_cleanups.
4539 * interps.c (interpreter_exec_cmd): Call do_cleanups.
4540 * source.c (show_substitute_path_command): Call do_cleanups.
4541 (unset_substitute_path_command, set_substitute_path_command):
4543 * symfile.c (load_command): Call do_cleanups.
4545 2013-05-30 Tom Tromey <tromey@redhat.com>
4547 * contrib/cleanup_check.py: New file.
4548 * contrib/gcc-with-excheck: Add option parsing.
4550 2013-05-30 Joel Brobecker <brobecker@adacore.com>
4552 * windows-nat.c (windows_delete_thread): Add missing space
4555 2013-05-30 Hafiz Abid Qadeer <abidh@codesourcery.com>
4557 * inferior.c (top level): Include tilde.h.
4558 (add_inferior_command): Call tilde_expand on the value of 'exec'
4561 2013-05-30 Pedro Alves <pedro@codesourcery.com>
4562 Yao Qi <yao@codesourcery.com>
4564 * tracepoint.c (encode_actions_1): Remove parameter 't'.
4566 (encode_actions): Likewise.
4567 * remote.c (remote_download_tracepoint): Caller update.
4568 * tracepoint.h (encode_actions): Update declaration.
4570 2013-05-30 Pedro Alves <palves@redhat.com>
4572 * python/python-internal.h (gdb_Py_DECREF): Cast OP to PyObject
4575 2013-05-30 Yao Qi <yao@codesourcery.com>
4577 * remote.c (remote_check_symbols): Remove unused parameter
4580 (remote_start_remote, remote_new_objfile): Caller update.
4582 2013-05-30 Yao Qi <yao@codesourcery.com>
4584 * mi/mi-cmds.c (mi_cmds): Define MI command
4585 '-exec-arguments' by macro DEF_MI_CMD_CLI_1 instead of
4588 2013-05-29 Pedro Alves <palves@redhat.com>
4590 * remote.c (remote_insert_breakpoint, remote_remove_breakpoint)
4591 (remote_insert_watchpoint, remote_remove_watchpoint)
4592 (remote_insert_hw_breakpoint, remote_remove_hw_breakpoint)
4593 (remote_verify_memory, compare_sections_command)
4594 (remote_search_memory): Set the general process/thread on the
4597 2013-05-29 Pedro Alves <palves@redhat.com>
4599 * aarch64-tdep.c: Don't include "features/aarch64-without-fpu.c".
4600 (_initialize_aarch64_tdep): Don't call
4601 initialize_tdesc_aarch64_without_fpu.
4602 * features/Makefile (WHICH): Remove reference to
4603 aarch64-without-fpu.
4604 * features/aarch64-without-fpu.c: Delete file.
4605 * regformats/aarch64-without-fpu.dat: Delete file.
4607 2013-05-28 Yao Qi <yao@codesourcery.com>
4609 * tracepoint.c (stringify_collection_list): Remove parameter
4611 (encode_actions): Caller update. Remove local variables.
4613 2013-05-24 Yao Qi <yao@codesourcery.com>
4615 * tracepoint.c (TFILE_PID): Remove.
4616 (tfile_open): Don't add thread and inferior.
4617 (tfile_close): Don't set 'inferior_ptid'. Don't call
4618 exit_inferior_silent.
4619 (tfile_thread_alive): Remove.
4620 (init_tfile_ops): Don't set field 'to_thread_alive' of
4623 2013-05-23 Doug Evans <dje@google.com>
4625 * contrib/cc-with-tweaks.sh (-p): Handle no dwo files.
4627 2013-05-23 Pedro Alves <palves@redhat.com>
4629 * common/filestuff.c [USE_WIN32API]: Define HAVE_SOCKETS.
4630 [HAVE_SYS_SOCKET_H]: Define HAVE_SOCKETS.
4631 (socket_mark_cloexec, gdb_socketpair_cloexec, gdb_socket_cloexec):
4632 Only define if HAVE_SOCKETS is defined.
4633 * configure.ac: Check for sys/socket.h.
4634 * config.in, configure: Regenerate.
4636 2013-05-23 Pedro Alves <palves@redhat.com>
4638 * dwarf2read.c (create_dwp_hash_table, create_dwo_in_dwp)
4639 (open_and_init_dwp_file): Use %s/pulongest instead of %u for
4640 printing uint32_t variables.
4642 2013-05-23 Pedro Alves <palves@redhat.com>
4644 * NEWS: Mention GDBserver range stepping support.
4646 2013-05-23 Yao Qi <yao@codesourcery.com>
4647 Pedro Alves <palves@redhat.com>
4649 * gdbthread.h (struct thread_control_state) <may_range_step>: New
4651 * infcmd.c (step_once, until_next_command): Enable range stepping.
4652 * infrun.c (displaced_step_prepare): Disable range stepping.
4653 (resume): Disable range stepping if stepping over a breakpoint or
4654 we have software watchpoints. If range stepping is enabled,
4655 assert the thread is in the stepping range.
4656 (clear_proceed_status_thread): Clear may_range_step.
4657 (handle_inferior_event): Disable range stepping as soon as we know
4658 the thread that hit the event. Re-enable it whenever we're going
4659 to step with a step range.
4660 * remote.c (struct vCont_action_support) <r>: New field.
4661 (use_range_stepping): New global.
4662 (remote_vcont_probe): Handle 'r' action.
4663 (append_resumption): Append an 'r' action if the thread may range
4665 (show_range_stepping): New function.
4666 (set_range_stepping): New function.
4667 (_initialize_remote): Call add_setshow_boolean_cmd to register the
4668 'set range-stepping' and 'show range-stepping' commands.
4669 * NEWS: Mention range stepping, the new vCont;r action, and the
4670 new "set/show range-stepping" commands.
4672 2013-05-23 Yao Qi <yao@codesourcery.com>
4673 Pedro Alves <palves@redhat.com>
4675 * remote.c (struct vCont_action_support): New struct.
4676 (struct remote_state) <support_vCont_t>: Remove field.
4677 <vCont_actions_support>: New field.
4678 (remote_vcont_probe, remote_stop_ns): Update.
4680 2013-05-23 Yao Qi <yao@codesourcery.com>
4681 Pedro Alves <palves@redhat.com>
4683 * gdbthread.h (pc_in_thread_step_range): New declaration.
4684 * thread.c (pc_in_thread_step_range): New function.
4685 * infrun.c (handle_inferior_event): Use it.
4687 2013-05-23 Joel Brobecker <brobecker@adacore.com>
4689 * mi/mi-cmd-break.c (mi_argv_to_format): Use xsnprintf instead
4692 2013-05-22 Keith Seitz <keiths@redhat.com>
4694 * ada-lang.c (is_known_support_routine): Add explicit free of
4695 'func_name' from find_frame_funname.
4696 (ada_unhandled_exception_name_addr_from_raise): Add cleanups
4697 for func_name from find_frame_funname.
4698 * python/py-frame.c (frapy_name): Add explicit free of
4699 'name' from find_frame_funname.
4700 * stack.c (find_frame_funname): Add comment explaining that
4701 funcp must be freed by the caller.
4702 Return copy of symbol names instead of pointers.
4703 (print_frame): Add a cleanup for 'funname' from
4705 * stack.h (find_frame_funname): Remove "const" from
4706 'funname' parameter.
4708 2013-05-22 Tom Tromey <tromey@redhat.com>
4711 * c-valprint.c (c_value_print): Use value_addr for
4712 references. Convert back to reference type with value_ref.
4714 2013-05-22 Eli Zaretskii <eliz@gnu.org>
4716 * windows-nat.c (handle_unload_dll): Don't call solib_add for the
4717 unloaded DLL, it will be done by handle_solib_event. See
4718 http://sourceware.org/ml/gdb-patches/2013-05/msg00713.html for the
4721 2013-05-22 Phil Muldoon <pmuldoon@redhat.com>
4723 * ui-out.c: Create typedef ui_out_level_p and define vector
4724 operations for that type.
4725 (struct ui_out): Use a vector instead of an array.
4726 (current_level): Return level from a vector.
4727 (push_level): Create a level in a vector.
4728 (pop_level): Delete a level in a vector.
4729 (ui_out_new): Create initial level zero level, and store in a
4731 (ui_out_destroy): Add vector cleanup.
4733 2013-05-22 Pedro Alves <palves@redhat.com>
4735 * python/python-internal.h (gdb_Py_DECREF): Tag with
4736 "ARI: editCase function".
4738 2013-05-21 Paul Pluzhnikov <ppluzhnikov@google.com>
4740 * solib-svr4.c (svr4_free_so): Protect against NULL dereference.
4742 2013-05-21 Pedro Alves <palves@redhat.com>
4744 * python/py-prettyprint.c (apply_val_pretty_printer): Check
4745 whether PRINTER is NULL before installing a Py_DECREF cleanup.
4746 * python/py-utils.c (py_decref): Don't check for NULL before
4749 2013-05-21 Pedro Alves <palves@redhat.com>
4751 * python/py-utils.c (py_decref): Remove extra braces.
4752 (gdb_pymodule_addobject): Remove extra braces.
4753 * python-internal.h (gdb_Py_DECREF): New static inline function.
4754 (Py_DECREF): Redefine as calling gdb_Py_DECREF.
4756 2013-05-21 Philippe Waroquiers <philippe.waroquiers@skynet.be>
4758 * breakpoints.c (detach_breakpoints): Do not
4759 detach breakpoints locations with loc_type bp_loc_other.
4761 2013-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
4763 Workaround Python 2.6.
4764 * python/py-utils.c (gdb_pymodule_addobject): Wrap Py_DECREF into
4767 2013-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
4769 Code cleanup: constification.
4770 * solib.c (solib_ops): Make return type and ops variable type const.
4771 (set_solib_ops): Make the new_ops parameter and ops variable const.
4772 (solib_find, solib_map_sections, clear_so, free_so, update_solib_list)
4773 (solib_add, solib_keep_data_in_core, clear_solib)
4774 (solib_create_inferior_hook, in_solib_dynsym_resolve_code)
4775 (reload_shared_libraries, solib_global_lookup): Make the ops variable
4777 * solib.h (set_solib_ops): Make the new_ops parameter const.
4779 2013-05-21 Joel Brobecker <brobecker@adacore.com>
4781 * data-directory/Makefile.in (SYSTEM_GDBINIT_SRCDIR): New
4783 (VPATH): Add SYSTEM_GDBINIT_SRCDIR.
4784 (SYSTEM_GDBINIT_DIR, SYSTEM_GDBINIT_INSTALL_DIR)
4785 (SYSTEM_GDBINIT_FILES): New variables.
4786 (all): Add stamp-system-gdbinit.
4787 (stamp-system-gdbinit): New rule.
4788 (clean-system-gdbinit, install-system-gdbinit)
4789 (uninstall-system-gdbinit): New rules. Make them .PHONY.
4790 (install-only): Add dependency on install-system-gdbinit.
4791 (uninstall): Add dependency on uninstall-system-gdbinit.
4792 (clean): Add dependency on clean-system-gdbinit.
4793 * system-gdbinit/elinos.py: New file.
4794 * system-gdbinit/wrs-linux.py: New file.
4796 2013-05-21 Joel Brobecker <brobecker@adacore.com>
4798 * ada-lang.c (old_renaming_is_invisible): Fix cleanup leak.
4800 2013-05-21 Hui Zhu <hui@codesourcery.com>
4802 * breakpoint.c (dprintf_breakpoint_ops): Remove its static.
4803 * breakpoint.h (dprintf_breakpoint_ops): Add extern.
4804 * mi/mi-cmd-break.c (ctype.h): New include.
4805 (gdb_obstack.h): New include.
4806 (mi_argv_to_format, mi_cmd_break_insert_1): New.
4807 (mi_cmd_break_insert): Call mi_cmd_break_insert_1.
4808 (mi_cmd_dprintf_insert): New.
4809 * mi/mi-cmds.c (mi_cmds): Add "dprintf-insert".
4810 * mi/mi-cmds.h (mi_cmd_dprintf_insert): New extern.
4812 2013-05-20 Tom Tromey <tromey@redhat.com>
4814 * python/py-prettyprint.c (search_pp_list): Decref 'attr'.
4816 2013-05-20 Tom Tromey <tromey@redhat.com>
4818 * python/py-value.c (valpy_get_dynamic_type): Simplify
4819 dynamic_type assignment. Use Py_XINCREF.
4821 2013-05-20 Tom Tromey <tromey@redhat.com>
4823 * python/py-type.c (typy_fields): Unconditionally decref 'r'.
4825 2013-05-20 Tom Tromey <tromey@redhat.com>
4827 * python/py-frame.c (frapy_older, frapy_newer, gdbpy_newest_frame)
4828 (gdbpy_selected_frame): Move object-construction code
4831 2013-05-20 Tom Tromey <tromey@redhat.com>
4833 * python/py-arch.c (gdbpy_initialize_arch): Use
4834 gdb_pymodule_addobject.
4835 * python/py-block.c (gdbpy_initialize_blocks): Use
4836 gdb_pymodule_addobject.
4837 * python/py-breakpoint.c (gdbpy_initialize_breakpoints): Use
4838 gdb_pymodule_addobject.
4839 * python/py-cmd.c (gdbpy_initialize_breakpoints): Use
4840 gdb_pymodule_addobject.
4841 * python/py-event.c (gdbpy_initialize_event_generic): Use
4842 gdb_pymodule_addobject.
4843 * python/py-evtregistry.c (gdbpy_initialize_eventregistry): Use
4844 gdb_pymodule_addobject.
4845 * python/py-evts.c (add_new_registry): Use
4846 gdb_pymodule_addobject.
4847 (gdbpy_initialize_py_events): Likewise.
4848 * python/py-finishbreakpoint.c
4849 (gdbpy_initialize_finishbreakpoints): Use
4850 gdb_pymodule_addobject.
4851 * python/py-frame.c (gdbpy_initialize_frames): Use
4852 gdb_pymodule_addobject.
4853 * python/py-function.c (gdbpy_initialize_functions): Use
4854 gdb_pymodule_addobject.
4855 * python/py-inferior.c (gdbpy_initialize_inferior): Use
4856 gdb_pymodule_addobject.
4857 * python/py-infthread.c (gdbpy_initialize_thread): Use
4858 gdb_pymodule_addobject.
4859 * python/py-objfile.c (gdbpy_initialize_objfile): Use
4860 gdb_pymodule_addobject.
4861 * python/py-param.c (gdbpy_initialize_parameters): Use
4862 gdb_pymodule_addobject.
4863 * python/py-progspace.c (gdbpy_initialize_pspace): Use
4864 gdb_pymodule_addobject.
4865 * python/py-symbol.c (gdbpy_initialize_symbols): Use
4866 gdb_pymodule_addobject.
4867 * python/py-symtab.c (gdbpy_initialize_symtabs): Use
4868 gdb_pymodule_addobject.
4869 * python/py-type.c (gdbpy_initialize_types): Use
4870 gdb_pymodule_addobject.
4871 * python/py-utils.c (gdb_pymodule_addobject): New function.
4872 * python/py-value.c (gdbpy_initialize_values): Use
4873 gdb_pymodule_addobject.
4874 * python/python-internal.h (gdb_pymodule_addobject): Declare.
4875 * python/python.c (_initialize_python): Use
4876 gdb_pymodule_addobject.
4878 2013-05-20 Tom Tromey <tromey@redhat.com>
4880 * python/py-cmd.c (cmdpy_completer): Use explicit decref.
4881 * python/py-param.c (get_set_value, get_show_value): Use
4883 * python/python.c (start_type_printers, apply_type_printers):
4884 Use explicit decrefs.
4886 2013-05-20 Tom Tromey <tromey@redhat.com>
4888 * python/py-evts.c (gdbpy_initialize_py_events): Don't
4891 2013-05-20 Tom Tromey <tromey@redhat.com>
4893 * python/python.c (gdbpy_run_events): Decref the result
4894 of PyObject_CallObject.
4896 2013-05-20 Tom Tromey <tromey@redhat.com>
4898 * python/py-symtab.c (set_sal): Use
4899 CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION. Return -1 on error.
4900 (symtab_and_line_to_sal_object): Update.
4902 2013-05-20 Tom Tromey <tromey@redhat.com>
4904 * python/py-param.c (compute_enum_values): Decref 'item'.
4906 2013-05-20 Tom Tromey <tromey@redhat.com>
4908 * mi/mi-main.c: Include python-internal.h.
4909 (mi_cmd_list_features): Check gdb_python_initialized.
4910 * python/py-inferior.c (python_on_normal_stop, python_on_resume)
4911 (python_inferior_exit, python_new_objfile, add_thread_object)
4912 (delete_thread_object, py_free_inferior): Check
4913 gdb_python_initialized.
4914 * python/py-prettyprint.c (apply_val_pretty_printer): Check
4915 gdb_python_initialized.
4916 * python/py-type.c (save_objfile_types): Check
4917 gdb_python_initialized.
4918 * python/python-internal.h (gdb_python_initialized): Declare.
4919 * python/python.c (ensure_python_env): Throw exception if
4920 Python not initialized.
4921 (before_prompt_hook, source_python_script_for_objfile)
4922 (start_type_printers, apply_type_printers,
4923 free_type_printers): Check gdb_python_initialized.
4924 * varobj.c (varobj_get_display_hint)
4925 (dynamic_varobj_has_child_method, update_dynamic_varobj_children)
4926 (install_new_value_visualizer, varobj_set_visualizer)
4927 (value_get_print_value): Check gdb_python_initialized.
4929 2013-05-20 Tom Tromey <tromey@redhat.com>
4931 * python/py-arch.c (gdbpy_initialize_arch): Return 'int'.
4933 * python/py-auto-load.c (gdbpy_initialize_auto_load): Return 'int'.
4934 * python/py-block.c (gdbpy_initialize_blocks): Return 'int'.
4936 * python/py-breakpoint.c (gdbpy_initialize_breakpoints): Return 'int'.
4938 * python/py-cmd.c (gdbpy_initialize_commands): Return 'int'.
4940 * python/py-event.c (gdbpy_initialize_event): Return 'int'.
4942 * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Change generated
4943 init function to return 'int'.
4944 * python/py-evtregistry.c (gdbpy_initialize_eventregistry):
4945 Return 'int'. Check errors.
4946 * python/py-evts.c (gdbpy_initialize_py_events): Return 'int'.
4948 * python/py-finishbreakpoint.c (gdbpy_initialize_finishbreakpoints):
4949 Return 'int'. Check errors.
4950 * python/py-frame.c (gdbpy_initialize_frames): Return 'int'.
4952 * python/py-function.c (gdbpy_initialize_functions): Return 'int'.
4954 * python/py-gdb-readline.c (gdbpy_initialize_gdb_readline):
4956 * python/py-inferior.c (gdbpy_initialize_inferior): Return 'int'.
4958 * python/py-infthread.c (gdbpy_initialize_thread): Return 'int'.
4960 * python/py-lazy-string.c (gdbpy_initialize_lazy_string): Return 'int'.
4962 * python/py-objfile.c (gdbpy_initialize_objfile): Return 'int'.
4964 * python/py-param.c (gdbpy_initialize_parameters): Return 'int'.
4966 * python/py-progspace.c (gdbpy_initialize_pspace): Return 'int'.
4968 * python/py-symbol.c (gdbpy_initialize_symbols): Return 'int'.
4970 * python/py-symtab.c (gdbpy_initialize_symtabs): Return 'int'.
4972 * python/py-type.c (gdbpy_initialize_types): Return 'int'.
4974 * python/py-value.c (gdbpy_initialize_values): Return 'int'.
4976 * python/python-internal.h (gdbpy_initialize_auto_load,
4977 gdbpy_initialize_values, gdbpy_initialize_frames,
4978 gdbpy_initialize_symtabs, gdbpy_initialize_commands,
4979 gdbpy_initialize_symbols, gdbpy_initialize_symtabs,
4980 gdbpy_initialize_blocks, gdbpy_initialize_types,
4981 gdbpy_initialize_functions, gdbpy_initialize_pspace,
4982 gdbpy_initialize_objfile, gdbpy_initialize_breakpoints,
4983 gdbpy_initialize_finishbreakpoints,
4984 gdbpy_initialize_lazy_string, gdbpy_initialize_parameters,
4985 gdbpy_initialize_thread, gdbpy_initialize_inferior,
4986 gdbpy_initialize_eventregistry, gdbpy_initialize_event,
4987 gdbpy_initialize_py_events, gdbpy_initialize_stop_event,
4988 gdbpy_initialize_signal_event,
4989 gdbpy_initialize_breakpoint_event,
4990 gdbpy_initialize_continue_event,
4991 gdbpy_initialize_exited_event, gdbpy_initialize_thread_event,
4992 gdbpy_initialize_new_objfile_event, gdbpy_initialize_arch):
4993 Update. Use CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.
4994 * python/python.c (gdb_python_initialized): New global.
4995 (gdbpy_initialize_events): Return 'int'. Check errors.
4996 (_initialize_python): Check errors. Set
4997 gdb_python_initialized.
4999 2013-05-20 Tom Tromey <tromey@redhat.com>
5001 * python/py-finishbreakpoint.c (bpfinishpy_out_of_scope):
5002 Decref the reslut of PyObject_CallMethod.
5004 2013-05-20 Tom Tromey <tromey@redhat.com>
5006 * python/py-event.c (gdbpy_initialize_event_generic): Return
5007 early if PyType_Ready fails.
5009 2013-05-20 Tom Tromey <tromey@redhat.com>
5011 * python/py-type.c (make_fielditem): Add gdb_assert_not_reached
5012 as 'default' in the switch.
5014 2013-05-20 Tom Tromey <tromey@redhat.com>
5016 * python/py-inferior.c (gdbpy_inferiors): Update. Hoist
5017 get_addr_from_python calls out of TRY_CATCH.
5018 (infpy_write_memory, infpy_search_memory): Likewise.
5019 * python/py-utils.c (get_addr_from_python): Return negative
5020 value on error. Use TRY_CATCH.
5021 * python/python-internal.h (get_addr_from_python): Use
5022 CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.
5024 2013-05-20 Tom Tromey <tromey@redhat.com>
5026 * python/py-event.c (evpy_emit_event): Decref the
5027 result of PyObject_CallFunctionObjArgs.
5029 2013-05-20 Tom Tromey <tromey@redhat.com>
5031 * python/py-cmd.c (cmdpy_completer): Use iterator protocol.
5034 2013-05-20 Tom Tromey <tromey@redhat.com>
5036 * python/py-cmd.c (cmdpy_init): Decref 'ds_obj'.
5038 2013-05-20 Tom Tromey <tromey@redhat.com>
5040 * python/py-event.h (gdbpy_initialize_event_generic): Use
5041 CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.
5042 * python/py-evts.c (add_new_registry): Use
5043 CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.
5044 * python/python-internal.h
5045 (CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION): New macro.
5047 2013-05-20 Tom Tromey <tromey@redhat.com>
5049 * python/py-arch.c (archpy_disassemble): Update.
5050 * python/py-type.c (typy_get_composite, typy_lookup_typename)
5051 (typy_lookup_type): Use GDB_PY_HANDLE_EXCEPTION.
5052 * python/py-utils.c (gdbpy_convert_exception): Return 'void'.
5053 * python/python-internal.h (CPYCHECKER_SETS_EXCEPTION): New
5055 (GDB_PY_HANDLE_EXCEPTION): Update.
5056 (gdbpy_convert_exception): Update. Use CPYCHECKER_SETS_EXCEPTION.
5058 2013-05-20 Tom Tromey <tromey@redhat.com>
5060 * python/python-internal.h (events_object_type): Remove.
5062 2013-05-20 Tom Tromey <tromey@redhat.com>
5064 * python/py-event.h (evpy_emit_event): Use
5065 CPYCHECKER_STEALS_REFERENCE_TO_ARG.
5066 * python/python-internal.h (CPYCHECKER_STEALS_REFERENCE_TO_ARG):
5069 2013-05-20 Tom Tromey <tromey@redhat.com>
5071 * py-evtregistry.c (create_event_object): Decref
5072 eventregistry_object if PyList_New fails.
5074 2013-05-20 Tom Tromey <tromey@redhat.com>
5076 * py-cmd.c (gdbpy_string_to_argv): Check result of
5079 2013-05-20 Tom Tromey <tromey@redhat.com>
5081 * python/python.c (before_prompt_hook): Add cleanup to
5084 2013-05-20 Tom Tromey <tromey@redhat.com>
5086 * python/py-function.c (fnpy_init): Decref result of
5087 PyObject_GetAttrString.
5089 2013-05-20 Tom Tromey <tromey@redhat.com>
5091 * python/py-threadevent.c (get_event_thread): Use
5092 CPYCHECKER_RETURNS_BORROWED_REF.
5093 * python/python-internal.h (CPYCHECKER_RETURNS_BORROWED_REF):
5095 (pspace_to_pspace_object, objfile_to_objfile_object)
5096 (find_thread_object): Use it.
5098 2013-05-20 Tom Tromey <tromey@redhat.com>
5100 * python/py-arch.c (arch_object_type): Use
5101 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5102 * python/py-block.c (block_syms_iterator_object_type):
5103 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5104 * python/py-bpevent.c (breakpoint_event_object_type):
5105 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5106 * python/py-cmd.c (cmdpy_object_type): Use
5107 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5108 * python/py-continueevent.c (continue_event_object_type):
5109 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5110 * python/py-event.h (GDBPY_NEW_EVENT_TYPE):
5111 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5112 * python/py-events.h (thread_event_object_type):
5113 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5114 * python/py-evtregistry.c (eventregistry_object_type): Use
5115 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5116 * python/py-exitedevent.c (exited_event_object_type):
5117 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5118 * python/py-finishbreakpoint.c (finish_breakpoint_object_type):
5119 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5120 * python/py-function.c (fnpy_object_type): Use
5121 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5122 * python/py-inferior.c (inferior_object_type, membuf_object_type):
5123 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5124 * python/py-infthread.c (thread_object_type): Use
5125 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5126 * python/py-lazy-string.c (lazy_string_object_type):
5127 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5128 * python/py-newobjfileevent.c (new_objfile_event_object_type):
5129 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5130 * python/py-objfile.c (objfile_object_type): Use
5131 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5132 * python/py-param.c (parmpy_object_type):
5133 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5134 * python/py-progspace.c (pspace_object_type):
5135 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5136 * python/py-signalevent.c (signal_event_object_type):
5137 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5138 * python/py-symtab.c (symtab_object_type, sal_object_type): Use
5139 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5140 * python/py-type.c (type_object_type, field_object_type)
5141 (type_iterator_object_type): Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5142 * python/py-internal.h (CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF): New
5144 (value_object_type, block_object_type, symbol_object_type)
5145 (event_object_type, stop_event_object_type, breakpoint_object_type)
5146 (frame_object_type): Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5148 2013-05-20 Andreas Tobler <andreas@fgznet.ch>
5150 * Makefile.in (ALL_TARGET_OBS): Add ppcfbsd-tdep.o.
5151 (ALLDEPFILES): Add ppcfbsd-nat.c and ppcfbsd-tdep.c.
5153 2013-05-20 Doug Evans <dje@google.com>
5155 When reading CU, stay in DWO. Be more tolerent of bad debug info.
5157 * dwarf2read.c (struct dwarf2_per_cu_data): New member
5158 reading_dwo_directly.
5159 (struct signatured_type): New member dwo_unit.
5160 (struct die_reader_specs): New member comp_dir.
5161 (create_signatured_type_table_from_index): Use malloc for
5162 all_type_units instead of objfile's obstack.
5163 (create_all_type_units): Ditto.
5164 (fill_in_sig_entry_from_dwo_entry): New function.
5165 (add_type_unit): New function.
5166 (lookup_dwo_signatured_type): New function.
5167 (lookup_dwp_signatured_type): New function.
5168 (lookup_signatured_type): New arg cu. All callers updated.
5169 (init_cu_die_reader): Initialize comp_dir.
5170 (read_cutu_die_from_dwo): New arg stub_comp_dir. All callers updated.
5171 Change assert of matching type signatures to call error on mismatch.
5172 (lookup_dwo_unit): Add assert.
5173 (init_tu_and_read_dwo_dies): New function.
5174 (init_cutu_and_read_dies): Call it.
5175 (build_type_unit_groups): Handle case of no type unit groups created.
5176 (hash_dwo_file, eq_dwo_file): Handle missing comp_dir.
5177 (lookup_dwo_cutu): Tweak complaint.
5178 (dwarf2_free_abbrev_table): Check for NULL abbrev_table.
5179 (dwarf2_per_objfile_free): Free all_type_units.
5181 2013-05-20 Joel Brobecker <brobecker@adacore.com>
5183 * windows-nat.c (handle_unload_dll): Add missing empty line.
5185 2013-05-20 Joel Brobecker <brobecker@adacore.com>
5187 * dwarf2read.c (prototyped_function_p): New function.
5188 (read_subroutine_type): Use it.
5190 2013-05-20 Joel Brobecker <brobecker@adacore.com>
5192 * rs6000-aix-tdep.c: De-indent some example code provided
5195 2013-05-17 Edjunior Machado <emachado@linux.vnet.ibm.com>
5197 * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Check if the
5198 region is ok for a hardware watchpoint using the new ptrace interface
5201 2013-05-17 Doug Evans <dje@google.com>
5203 * NEWS: Mention new maintenance commands check-symtabs, and
5204 expand-symtabs, and renamed check-psymtabs.
5205 * psymtab.c (maintenance_check_psymtabs): Renamed from
5206 maintenance_check_symtabs. Only process already-expanded symbol
5208 (_initialize_psymtab): Update.
5209 * symmisc.c (maintenance_check_symtabs): New function.
5210 (maintenance_expand_name_matcher): New function
5211 (maintenance_expand_file_matcher): New function
5212 (maintenance_expand_symtabs): New function.
5213 (_initialize_symmisc): Add "mt check-symtabs" and "mt expand-symtabs"
5216 2013-05-17 Tom Tromey <tromey@redhat.com>
5218 * python/py-inferior.c (infpy_read_memory): Don't call
5219 PyErr_SetString if PyObject_New fails.
5220 * python/py-frame.c (frame_info_to_frame_object): Don't call
5221 PyErr_SetString if PyObject_New fails.
5223 2013-05-17 Pavel Chupin <pavel.v.chupin@intel.com>
5225 * acinclude.m4: Add check for dlopen in libdl.
5226 * configure.ac: Ditto.
5227 * configure: Regenerate.
5229 2013-05-17 Phil Muldoon <pmuldoon@redhat.com>
5231 * frame.c (frame_stash): Convert to htab.
5232 (frame_addr_hash): New function.
5233 (frame_addr_hash_eq): New function.
5234 (frame_stash_create): Convert function to create
5236 (frame_stash_add): Convert function to add an entry to a hash
5238 (frame_stash_find): Convert function to search the hash table.
5239 (frame_stash_invalidate): Convert function to empty the hash
5241 (get_frame_id): Only add to stash if a frame_id is created.
5242 (_initialize_frame): Call frame_stash_create.
5244 2013-05-16 Yue Lu <hacklu.newborn@gmail.com> (tiny change)
5246 * configure.ac: Ensure MIG is available when building for GNU Hurd
5248 * configure: Regenerate.
5250 2013-05-16 Joel Brobecker <brobecker@adacore.com>
5252 * dwarf2read.c (set_cu_language): Add DW_LANG_UPC handling.
5254 2013-05-16 Joel Brobecker <brobecker@adacore.com>
5256 * ada-lang.c (ada_make_symbol_completion_list): Make sure
5257 all cleanups are done before returning from this function.
5259 2013-05-15 Joel Brobecker <brobecker@adacore.com>
5261 * utils.h: #include "exceptions.h".
5262 (enum errors): Remove partial declaration.
5264 2013-05-15 Joel Brobecker <brobecker@adacore.com>
5266 * gdbarch.sh (core_xfer_shared_libraries_aix): New method.
5267 * gdbarch.h, gdbarch.c: Regenerate.
5268 * corelow.c (core_xfer_partial): Add TARGET_OBJECT_LIBRARIES_AIX
5271 * rs6000-aix-tdep.h: New file.
5272 * Makefile.in (HFILES_NO_SRCDIR): Add rs6000-aix-tdep.h.
5273 * rs6000-aix-tdep.c: Include "rs6000-aix-tdep.h" and
5275 (struct field_info, struct ld_info_desc): New types.
5276 (ld_info32_desc, ld_info64_desc): New static constants.
5277 (struct ld_info): New type.
5278 (rs6000_aix_extract_ld_info): New function.
5279 (rs6000_aix_shared_library_to_xml): Likewise.
5280 (rs6000_aix_ld_info_to_xml): Likewise.
5281 (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
5282 (rs6000_aix_init_osabi): Add call to
5283 set_gdbarch_core_xfer_shared_libraries_aix.
5284 * rs6000-nat.c: Add "rs6000-aix-tdep.h" include.
5285 Remove "xml-utils.h" include.
5286 (LdInfo): Delete typedef.
5287 (ARCH64_DECL, LDI_FIELD, LDI_NEXT, LDI_FD, LDI_FILENAME):
5289 (rs6000_ptrace_ldinfo): Change return type to gdb_byte *.
5290 Adjust code accordingly.
5291 (rs6000_core_ldinfo): Delete, folded into
5292 rs6000_aix_core_xfer_shared_libraries_aix.
5293 (rs6000_xfer_shared_library): Delete.
5294 (rs6000_xfer_shared_libraries): Reimplement.
5296 2013-05-15 Markus Metzger <markus.t.metzger@intel.com>
5298 * record.c (record_goto_cmdlist): New.
5299 (cmd_record_goto): Split into this ...
5300 (cmd_record_goto_begin): ... this
5301 (cmd_record_goto_end): ... and this.
5302 (_initialize_record): Change "record goto" to prefix command.
5303 Add commands for "record goto begin" and "record goto end".
5304 Add an alias for "record goto start" to "record goto begin".
5306 2013-05-14 Jan Kratochvil <jan.kratochvil@redhat.com>
5308 * linespec.c (convert_linespec_to_sals): New comment for
5309 SOURCE_FILENAME assignment.
5311 2013-05-14 Jan Kratochvil <jan.kratochvil@redhat.com>
5313 * cleanups.c (restore_my_cleanups): Replace gdb_assert by
5316 2013-05-14 Tom Tromey <tromey@redhat.com>
5318 * eval.c (parse_and_eval_long): Make 'exp' const.
5319 * value.h (parse_and_eval_long): Update.
5321 2013-05-14 Tom Tromey <tromey@redhat.com>
5323 * ui-file.c (gdb_fopen): Make arguments const.
5324 * ui-file.h (gdb_fopen): Make arguments const.
5326 2013-05-14 Tom Tromey <tromey@redhat.com>
5328 * remote.c (remote_set_trace_notes): Make arguments const.
5329 * target.c (update_current_target): Update cast.
5330 * target.h (to_set_trace_notes): Make arguments const.
5332 2013-05-14 Tom Tromey <tromey@redhat.com>
5334 * go32-nat.c (go32_terminal_info): Make 'args' const.
5335 * inferior.h (child_terminal_info): Update.
5336 * inflow.c (child_terminal_info): Make 'args' const.
5337 * target.c (default_terminal_info): Make 'args' const.
5338 (debug_to_terminal_save_ours): Likewise.
5339 * target.h (struct target_ops) <to_terminal_info>: Make argument
5342 2013-05-13 Tom Tromey <tromey@redhat.com>
5344 * gcore.c (create_gcore_bfd): Make 'filename' const.
5345 * gcore.h (create_gcore_bfd): Make 'filename' const.
5346 * record-full.c (record_full_save): Make 'recfilename' const.
5347 * target.c (target_save_record): Make 'filename' const.
5348 * target.h (struct target_ops) <to_save_record>: Make 'filename'
5350 (target_save_record): Likewise.
5352 2013-05-13 Tom Tromey <tromey@redhat.com>
5355 * dwarf2read.c (dwarf2_record_block_ranges): Ensure that the
5356 ranges section has been read.
5358 2013-05-13 Tom Tromey <tromey@redhat.com>
5361 * eval.c (evaluate_subexp_standard) <STRUCTOP_STRUCT,
5362 STRUCTOP_PTR>: Return a not_lval value for
5363 EVAL_AVOID_SIDE_EFFECTS.
5364 * opencl-lang.c (evaluate_subexp_opencl): Return a not_lval value
5365 for EVAL_AVOID_SIDE_EFFECTS.
5367 2013-05-13 Joel Brobecker <brobecker@adacore.com>
5369 * rs6000-aix-tdep.c (rs6000_push_dummy_call): Convert
5370 floating point registers to register type before storing
5372 * rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call):
5375 2013-05-10 Joel Brobecker <brobecker@adacore.com>
5376 Tom Tromey <tromey@redhat.com>
5378 * common/filestuff.c (mark_fd_no_cloexec, unmark_fd_no_cloexec):
5380 * common/filestuff.c (mark_fd_no_cloexec, unmark_fd_no_cloexec):
5382 * darwin-nat.c (darwin_pre_ptrace): Use mark_fd_no_cloexec.
5383 (darwin_ptrace_him): Use unmark_fd_no_cloexec.
5384 * inf-ttrace.c (do_cleanup_pfds): Use unmark_fd_no_cloexec.
5385 (inf_ttrace_prepare): Use mark_fd_no_cloexec.
5387 2013-05-10 Freddie Chopin <freddie_chopin@op.pl>
5388 Tom Tromey <tromey@redhat.com>
5391 * configure: Rebuild.
5392 * configure.ac (build_warnings): Do not use -Wformat-nonliteral
5395 2013-05-10 Pedro Alves <palves@redhat.com>
5397 * remote.c (_initialize_remote): Fix spelling of
5398 qXfer:traceframe-info:read packet in packet config command.
5400 2013-05-10 David Taylor <dtaylor@emc.com>
5404 * remote.c (remote_trace_set_readonly_regions): Do not overwrite
5405 "QTro" at start of packet.
5407 2013-05-10 Joel Brobecker <brobecker@adacore.com>
5409 * solib-aix.c (solib_aix_relocate_section_addresses):
5410 For the .bss section action, apply the same offset as
5413 2013-05-10 Joel Brobecker <brobecker@adacore.com>
5415 * solib-aix.c (solib_aix_relocate_section_addresses):
5416 Remove FIXME comment.
5418 2013-05-10 Joel Brobecker <brobecker@adacore.com>
5421 * sol-thread.c (ps_lgetxregsize, ps_lgetxregs, ps_lsetxregs):
5422 New functions, directly copied from sparc-sol-thread.c.
5423 * sparc-sol-thread.c: Delete.
5424 * configure.ac: Remove code handling sparc-solaris-thread.c.
5425 * configure: Regenerate.
5427 2013-05-10 Phil Muldoon <pmuldoon@redhat.com>
5429 * stack.c (backtrace_command_1): Add "no-filters", and Python frame
5431 (backtrace_command): Add "no-filters" option parsing.
5432 (_initialize_stack): Alter help to reflect "no-filters" option.
5433 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-framefilter.o
5434 (SUBDIR_PYTHON_SRCS): Add py-framefilter.c
5435 (py-frame.o): Add target
5436 * data-directory/Makefile.in (PYTHON_DIR): Add Python frame
5438 * python/python.h: Add new frame filter constants, and flag enum.
5439 (apply_frame_filter): Add definition.
5440 * python/python.c (apply_frame_filter): New non-Python
5442 * python/py-utils.c (py_xdecref): New function.
5443 (make_cleanup_py_xdecref): Ditto.
5444 * python/py-objfile.c: Declare frame_filters dictionary.
5445 (objfpy_dealloc): Add frame_filters dealloc.
5446 (objfpy_new): Initialize frame_filters attribute.
5447 (objfile_to_objfile_object): Ditto.
5448 (objfpy_get_frame_filters): New function.
5449 (objfpy_set_frame_filters): New function.
5450 * python/py-progspace.c: Declare frame_filters dictionary.
5451 (pspy_dealloc): Add frame_filters dealloc.
5452 (pspy_new): Initialize frame_filters attribute.
5453 (pspacee_to_pspace_object): Ditto.
5454 (pspy_get_frame_filters): New function.
5455 (pspy_set_frame_filters): New function.
5456 * python/py-framefilter.c: New file.
5457 * python/lib/gdb/command/frame_filters.py: New file.
5458 * python/lib/gdb/frames.py: New file.
5459 * python/lib/gdb/__init__.py: Initialize global frame_filters
5461 * python/lib/gdb/FrameDecorator.py: New file.
5462 * python/lib/gdb/FrameIterator.py: New file.
5463 * mi/mi-cmds.c (mi_cmds): Add frame filters command.
5464 * mi/mi-cmds.h: Declare.
5465 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Add
5466 --no-frame-filter logic, and Python frame filter logic.
5467 (stack_enable_frame_filters): New function.
5468 (parse_no_frame_option): Ditto.
5469 (mi_cmd_stack_list_frames): Add --no-frame-filter and Python frame
5471 (mi_cmd_stack_list_locals): Ditto.
5472 (mi_cmd_stack_list_args): Ditto.
5473 (mi_cmd_stack_list_variables): Ditto.
5474 * NEWS: Add frame filter note.
5476 2013-05-09 Doug Evans <dje@google.com>
5478 * symfile.c (syms_from_objfile_1): Delete args offsets, num_offsets.
5479 All callers updated.
5480 (syms_from_objfile): Ditto. Make static.
5481 (symbol_file_add_with_addrs): Renamed from
5482 symbol_file_add_with_addrs_or_offsets. Delete args offsets,
5483 num_offsets. All callers updated.
5484 * symfile.h (syms_from_objfile): Delete.
5486 * symfile.c (decrement_reading_symtab): Add assert.
5487 (increment_reading_symtab): Ditto.
5489 2013-05-09 Joel Brobecker <brobecker@adacore.com>
5491 * source.c (forward_search_command): Replace call to getc
5493 (reverse_search_command): Likewise.
5495 2013-05-08 Doug Evans <dje@google.com>
5497 * psymtab.c (expand_symtabs_matching_via_partial): Fix file name
5500 2013-05-08 Joel Brobecker <brobecker@adacore.com>
5502 * sol-thread.c (info_cb): Factorize the code a little.
5504 2013-05-08 Joel Brobecker <brobecker@adacore.com>
5506 * sol-thread.c (info_cb): Rework the output of the "maintenance
5507 info sol-threads" command a bit.
5509 2013-05-08 Joel Brobecker <brobecker@adacore.com>
5511 * sol-thread.c (info_cb) [ti.ti_state == TD_THR_SLEEP]:
5512 Replace ti.ti_startfunc by ti.ti_pc.
5514 2013-05-08 Joel Brobecker <brobecker@adacore.com>
5516 * solib-aix.c (solib_aix_free_library_list): New function
5517 for the case where HAVE_LIBEXPAT is not defined.
5519 2013-05-07 Sergio Durigan Junior <sergiodj@redhat.com>
5521 PR breakpoints/15413:
5522 * breakpoint.c (condition_completer): Simplify the code to
5523 disconsider multiple locations of breakpoints when completing the
5524 "condition" command.
5526 2013-05-07 Pierre Muller <muller@sourceware.org>
5528 * common/linux-btrace.c: ARI fix: Include "gdb_wait.h"
5529 instead of <sys/wait.h>.
5531 2013-05-07 Pierre Muller <muller@sourceware.org>
5533 * nios2-tdep.c (nios2_dwarf_reg_to_regnum): ARI fix: remove
5534 trailing new line from warning message.
5536 2013-05-07 Pierre Muller <muller@sourceware.org>
5538 * contrib/ari/gdb_ari.sh (SOLIB_ADD, SOLIB_CREATE_INFERIOR_HOOK)
5539 (PC_SOLIB): Change type from ari_deprecate to ari_regression.
5541 2013-05-07 Joel Brobecker <brobecker@adacore.com>
5543 * rs6000-nat.c (rs6000_core_ldinfo): Remove '\n' at end of
5544 error message (ARI fix).
5546 2013-05-07 Joel Brobecker <brobecker@adacore.com>
5548 * features/library-list-aix.dtd: Replace library-list by
5550 * rs6000-nat.c: Replace library-list by library-list-aix
5552 * solib-aix.c: Likewise.
5554 2013-05-07 Joel Brobecker <brobecker@adacore.com>
5556 * target.h (enum target_object) [TARGET_OBJECT_LIBRARIES_AIX]:
5557 Renames TARGET_OBJECT_AIX_LIBRARIES.
5558 * rs6000-nat.c: Replace TARGET_OBJECT_AIX_LIBRARIES with
5559 TARGET_OBJECT_LIBRARIES_AIX throughout.
5560 * solib-aix.c: Likwise.
5562 2013-05-07 Yao Qi <yao@codesourcery.com>
5564 * solib-dsbt.c (struct dsbt_info) <enable_break2_done>: Remove.
5565 (get_dsbt_info, enable_break, dsbt_clear_solib): Update.
5567 2013-05-07 Yao Qi <yao@codesourcery.com>
5569 * solib-dsbt.c (enable_break): Declare.
5570 (dsbt_current_sos): Remove call to enable_break2.
5571 (enable_break2): Rename to enable_break. Set solib breakpoint
5572 on '_dl_debug_state'.
5573 (enable_break): Remove.
5575 2013-05-07 Luis Machado <lgustavo@codesourcery.com>
5577 * ppc-linux-nat.c (ppc_linux_new_thread): Clear the new thread's
5578 debug state prior to replicating existing hardware watchpoints or
5581 2013-05-07 Jan Kratochvil <jan.kratochvil@redhat.com>
5583 * gcore.c (gcore_create_callback): Ignore sections with
5584 separate_debug_objfile_backlink != NULL.
5586 2013-05-06 Sandra Loosemore <sandra@codesourcery.com>
5587 Andrew Jenner <andrew@codesourcery.com>
5588 Chung-Lin Tang <cltang@codesourcery.com>
5589 Julian Brown <julian@codesourcery.com>
5591 Based on the nios2-elf port from Altera Corporation.
5593 * Makefile.in (ALL_TARGET_OBS): Add nios2-tdep.o and
5595 (HFILES_NO_SRCDIR): Add nios2-tdep.h.
5596 (ALLDEPFILES): Add nios2-tdep.c and nios2-linux-tdep.c.
5597 * configure.tgt: Add nios2*-*-linux* and nios2*-*-* targets.
5598 * nios2-tdep.h: New.
5599 * nios2-tdep.c: New.
5600 * nios2-linux-tdep.c: New.
5601 * features/Makefile (WHICH): Add nios2-linux.
5602 (nios2-linux-expedite): Set.
5603 * features/nios2-cpu.xml: New.
5604 * features/nios2.xml: New.
5605 * features/nios2-linux.xml: New.
5606 * features/nios2.c: New (autogenerated).
5607 * features/nios2-linux.c: New (autogenerated).
5608 * regformats/nios2-linux.dat: New (autogenerated).
5609 * NEWS (Changes since GDB 7.6): Add new Nios II targets
5612 2013-05-06 Doug Evans <dje@google.com>
5614 * symfile.c: Whitespace cleanup.
5616 * solist.h (struct target_so_ops): New member clear_so.
5617 * solib-svr4.c (svr4_clear_so): New function.
5618 (_initialize_svr4_solib): Set svr4_so_ops.clear_so.
5619 * solib.c (clear_so): Renamed from free_so_symbols.
5620 All callers updated. Call target clear_so if it exists.
5622 2013-05-06 Tom Tromey <tromey@redhat.com>
5624 * ada-lang.c (ada_value_primitive_packed_val): Don't
5626 * value.c (set_value_parent): Incref the new parent and decref
5628 (value_copy, value_primitive_field): Use set_value_parent.
5630 2013-05-06 Tom Tromey <tromey@redhat.com>
5632 * dwarf2loc.c (invalid_synthetic_pointer): Move earlier.
5633 (indirect_pieced_value): Call dwarf2_fetch_constant_bytes
5635 * dwarf2loc.h (dwarf2_fetch_constant_bytes): Declare.
5636 * dwarf2read.c (write_constant_as_bytes)
5637 (dwarf2_fetch_constant_bytes): New functions.
5639 2013-05-06 Tom Tromey <tromey@redhat.com>
5641 * dwarf2read.c (dwarf2_const_value_data): Remove unused
5643 (dwarf2_const_value_attr): Update.
5645 2013-05-06 Tom Tromey <tromey@redhat.com>
5647 * somread.c (som_symfile_offsets): Add 'const' to addrs.
5648 * machoread.c (macho_symfile_offsets): Add 'const' to addrs.
5649 * xcoffread.c (xcoff_symfile_offsets): Add 'const' to addrs.
5652 2013-05-06 Tom Tromey <tromey@redhat.com>
5654 * dwarf2read.c (dwarf2_const_value_attr): Use 'obstack', not
5657 2013-05-06 Doug Evans <dje@google.com>
5659 * dbxread.c (process_one_symbol): Constify section_offsets parameter.
5660 * stabsread.h (process_one_symbol): Update declaration.
5661 * dwarf2read.c (dw2_relocate): Constify new_offsets, delta parameters.
5662 * elfread.c (elf_symfile_relocate_probe): Ditto.
5663 * psymtab.c (relocate_psymtabs): Ditto.
5664 * objfiles.c (objfile_relocate1): Constify new_offsets parameter.
5665 (objfile_relocate): Ditto.
5666 * objfiles.h (objfile_relocate): Update declaration.
5667 * symfile.c (relative_addr_info_to_section_offsets): Constify
5669 (default_symfile_offsets): Ditto.
5670 (syms_from_objfile_1): Constify offsets parameter.
5671 (syms_from_objfile): Ditto.
5672 (symbol_file_add_with_addrs_or_offsets): Ditto.
5673 (symfile_map_offsets_to_segments): Constify data parameter.
5674 * symfile.h (struct quick_symbol_functions): Constify new_offsets,
5675 delta parameters of member relocate.
5676 (struct sym_probe_fns): Constify new_offsets,
5677 delta parameters of member sym_relocate_probe.
5678 (struct sym_fns): Constify section_addr_info parameter of member
5680 (relative_addr_info_to_section_offsets): Update declaration.
5681 (default_symfile_offsets): Ditto.
5682 (syms_from_objfile): Ditto.
5683 (symfile_map_offsets_to_segments): Ditto.
5685 * symfile.c (syms_from_objfile_1): Use correct section count when
5686 objfile->sf == NULL.
5688 2013-05-06 Mike Frysinger <vapier@gentoo.org>
5690 * common/linux-btrace.c (intel_supports_btrace): Fix indentation.
5692 2013-05-06 Doug Evans <dje@google.com>
5694 * psympriv.h (struct partial_symtab): Augment comment for member
5697 2013-05-06 Joel Brobecker <brobecker@adacore.com>
5699 Reimplement shared library support on ppc-aix...
5700 * target.h (TARGET_OBJECT_AIX_LIBRARIES): New target_object enum.
5701 * features/library-list-aix.dtd: New file.
5702 * solib-aix.h, solib-aix.c: New file.
5703 * rs6000-aix-tdep.c: #include "solib.h" and "solib-aix.h".
5704 (rs6000_find_toc_address_hook): Delete.
5705 (rs6000_push_dummy_call): Rewrite code setting the TOC value.
5706 (rs6000_aix_init_osabi): Register solib_aix_so_ops.
5707 * rs6000-nat.c: Remove "xcoffsolib.h" include. Include
5709 (map_vmap, vmap_exec, vmap_ldinfo, add_vmap, objfile_symbol_add)
5710 (vmap_symtab, fixup_breakpoints): Delete.
5711 (rs6000_xfer_shared_libraries): New function.
5712 (rs6000_xfer_partial): Add TARGET_OBJECT_AIX_LIBRARIES handling.
5713 (vmap_secs, bss_data_overlap, vmap_add_symbols): Delete.
5714 (xcoff_relocate_symtab, xcoff_relocate_core): Delete.
5715 (rs6000_ptrace_ldinfo, rs6000_core_ldinfo)
5716 (rs6000_xfer_shared_library): New function.
5717 (find_toc_address): Delete.
5718 (_initialize_rs6000_nat): Do not set rs6000_find_toc_address_hook.
5719 * rs6000-tdep.h (rs6000_find_toc_address_hook): Remove.
5720 * xcoffread.c (record_minimal_symbol): Reloate symbol address
5721 before creating minimal symbol. Adjust function description
5723 (scan_xcoff_symtab): Replace call to
5724 prim_record_minimal_symbol_and_info by call to
5725 record_minimal_symbol.
5726 (xcoff_symfile_offsets): Reimplement mostly as a wrapper
5727 around default_symfile_offsets.
5728 * configure.tgt: Add solib-aix.o to gdb_target_obs for
5729 powerpc-aix targets.
5730 * config/rs6000/nm-rs6000.h: Delete.
5731 * config/powerpc/aix.mh (NAT_FILE): Delete.
5732 (NATDEPFILES): Remove xcoffsolib.o.
5733 * Makefile.in (XMLFILES): Add library-list-aix.dtd.
5734 (ALL_TARGET_OBS): Add solib-aix.o.
5735 (HFILES_NO_SRCDIR): Remove xcoffsolib.h and
5736 config/rs6000/nm-rs6000.h. Add solib-aix.h.
5737 (ALLDEPFILES): Add solib-aix.c. Remove xcoffsolib.c.
5738 * xcoffsolib.h, xcoffsolib.c: Delete.
5740 * solib.c (reload_shared_libraries): Remove reference to
5741 SOLIB_CREATE_INFERIOR_HOOK.
5742 * breakpoint.c (handle_solib_event): Remove reference to SOLIB_ADD.
5743 (disable_breakpoints_in_shlibs): Remove reference to PC_SOLIB.
5744 (momentary_bkpt_re_set): Replace SOLIB_ADD by solib_add in
5746 * corelow.c (deprecated_core_resize_section_table): Delete.
5747 * exec.c: Remove include of xcoffsolib.h".
5748 (map_vmap, vmap): Delete.
5749 (exec_close_1): Remove references to vmap.
5750 (exec_file_attach): Remove vmap handling code, and reference
5751 to DEPRECATED_IBM6000_TARGET.
5752 (bfdsec_to_vmap): Delete.
5753 (exec_files_info): Remove block of code handling VMAP.
5754 * infcmd.c (post_create_inferior): Remove reference to
5755 SOLIB_CREATE_INFERIOR_HOOK and SOLIB_ADD.
5756 * infrun.c (follow_exec): Remove reference to
5757 SOLIB_CREATE_INFERIOR_HOOK.
5758 * stack.c (print_frame): Remove reference to PC_SOLIB.
5759 * solib-dsbt.c (dsbt_current_sos): Adjust comment.
5760 (dsbt_relocate_main_executable): Likewise.
5761 * solib-frv.c (frv_current_sos): Likewise.
5763 2013-05-06 Joel Brobecker <brobecker@adacore.com>
5765 * sol-thread.c (rw_common): Cast BUF to "gdb_byte *" in calls
5766 to target_write_memory and target_read_memory.
5768 2013-05-06 Joel Brobecker <brobecker@adacore.com>
5770 * darwin-nat.c (darwin_setup_fake_stop_event): New function.
5771 (darwin_attach): Adjust using darwin_setup_fake_stop_event.
5773 2013-05-06 Joel Brobecker <brobecker@adacore.com>
5775 * darwin-nat.c: Replace all "%x" instances in format strings
5776 into "0x%x" throughout.
5778 2013-05-06 Joel Brobecker <brobecker@adacore.com>
5780 * darwin-nat.c (darwin_mourn_inferior): Replace call to
5781 gdb_assert by call to MACH_CHECK_ERROR.
5782 (darwin_attach_pid): Raise an error rather than a failed
5783 assertion when various system calls failed. Report a warning
5784 instead of raising a failed assertion when PREV_NOT is not NULL
5785 after call to mach_port_request_notification.
5786 (darwin_ptrace_me): Raise an error rather than a failed
5787 assertion when read returns nonzero.
5789 2013-05-06 Joel Brobecker <brobecker@adacore.com>
5791 * amd64-darwin-tdep.c: Remove #include "gdb_assert.h".
5793 2013-05-05 Jan Kratochvil <jan.kratochvil@redhat.com>
5795 * cleanups.c (restore_my_cleanups): New gdb_assert for SENTINEL_CLEANUP.
5797 2013-05-05 Jan Kratochvil <jan.kratochvil@redhat.com>
5799 * event-top.c (display_gdb_prompt): Call missing do_cleanups.
5800 * infcmd.c (get_return_value) <!stop_regs>: Do not overwrite CLEANUP.
5801 * symfile.c (symfile_bfd_open): New variable back_to. Do not leave
5802 a stale cleanup. Fix double free of NAME.
5804 2013-05-04 Eli Zaretskii <eliz@gnu.org>
5806 * windows-nat.c (windows_delete_thread): Accept an additional
5807 argument, the thread's exit code, and announce thread death when
5808 print_thread_events is non-zero and we are deleting a thread that
5809 is not the main thread.
5810 (get_windows_debug_event): Pass thread exit code to
5811 windows_delete_thread.
5813 2013-05-03 Kevin Buettner <kevinb@redhat.com>
5815 * v850-tdep.c (elf-bfd.h, elf/v850.h): Include.
5816 (R_149_REGNUM, E_NUM_OF_V850E2_REGS, E_SELID_1_R0_REGNUM)
5817 (E_SELID_1_R31_REGNUM, E_SELID_2_R0_REGNUM, E_SELID_2_R31_REGNUM)
5818 (E_SELID_3_R0_REGNUM, E_SELID_3_R31_REGNUM, E_SELID_4_R0_REGNUM)
5819 (E_SELID_4_R31_REGNUM, E_SELID_5_R0_REGNUM, E_SELID_5_R31_REGNUM)
5820 (E_SELID_6_R0_REGNUM, E_SELID_6_R31_REGNUM, E_SELID_7_R0_REGNUM, E_SELID_7_R31_REGNUM)
5821 (E_VR0_REGNUM, E_VR31_REGNUM, E_NUM_OF_V850E3V5_REGS): Define.
5822 (v850_abi, V850_ABI_GCC, V850_ABI_RH850): New enum and constants.
5823 (gdbarch_tdep): New struct.
5824 (v850e2_register_name): Use E_NUM_OF_V850E2_REGS instead of
5826 (v850e3v5_register_name): New function.
5827 (v850_register_type): v850e3v5 vector registers are 64-bits wide.
5828 (v850_use_struct_convention): Add `gdbarch' parameter. Add new
5829 code handling the struct return conventions for the RH850 ABI.
5831 (v850_eight_byte_align_p): New function.
5832 (v850_push_call_dummy): Push structs by value, not by reference
5833 for the RH850 ABI. Add support for eight byte alignment.
5834 (v850_dbtrap_breakpoint_from_pc): New function.
5835 (v850_gdbarch_init): Add ABI detection code. Register
5836 v850e3v5_register_name for the v850e3v5 architecture. Set the
5837 number of registers for v850e3v5. Register
5838 v850_dbtrap_breakpoint_from_pc as appropriate.
5839 (_initialize_gdbarch_init): Registration bfd_arch_v850_rh850.
5841 2013-05-03 Doug Evans <dje@google.com>
5843 * objfiles.c (objfile_relocate): Use gdb_bfd_count_sections instead
5844 of bfd_count_sections.
5845 * solib-target.c (solib_target_relocate_section_addresses): Ditto.
5846 * symfile.c (default_symfile_offsets): Ditto.
5847 (syms_from_objfile_1): Ditto. Make dummy addrs list an array of
5848 one entry, not bfd_count_sections entries.
5850 2013-05-03 Kevin Buettner <kevinb@redhat.com>
5852 * rl78-tdep.c (rl78_register_reggroup_p): Include SP in the
5853 `save' and `restore' register groups. Don't include SPL
5854 or SPH in these groups.
5855 (rl78_dwarf_reg_to_regnum): Adjust mapping for
5856 RL78_PC_REGNUM. Add mappings for RL78_PSW_REGNUM,
5857 RL78_ES_REGNUM, and RL78_CS_REGNUM.
5858 (rl78_gdbarch_init): Set `dwarf2_addr_size' to 4. Invoke
5859 dwarf2_append_unwinders().
5861 2013-05-03 Philippe Waroquiers <philippe.waroquiers@skynet.be>
5863 * break-catch-sig.c (signal_catchpoint_breakpoint_hit): Do not
5864 ignore SIGINT and SIGTRAP in case these internal signals are
5867 2013-05-01 Joel Brobecker <brobecker@adacore.com>
5869 * darwin-nat.c (darwin_read_write_inferior): Change types
5870 of parameters rdaddr and wraddr to "gdb_byte *". Change type
5871 of copy_count to "mach_msg_type_number_t".
5872 (darwin_read_dyld_info): Change type of parameter
5873 rdaddr to "gdb_byte *".
5875 2013-05-01 Joel Brobecker <brobecker@adacore.com>
5877 * solib-ia64-hpux.c (ia64_hpux_read_dynamic_info): Change cast
5878 of &info->load_map from "char *" to "gdb_byte *".
5880 2013-05-01 Joel Brobecker <brobecker@adacore.com>
5882 * ia64-tdep.c (ia64_access_fpreg): Change cast of val
5883 from "char *" to "gdb_byte *".
5884 (ia64_access_rse_fpreg, ia64_access_mem): Likewise.
5886 2013-04-30 Doug Evans <dje@google.com>
5888 * dwarf2read.c (lookup_dwo_unit): Return NULL if DWO not found.
5889 (init_cutu_and_read_dies): Flag a complaint, not error, for bad
5890 DWO stub. If DWO isn't found, just use stub.
5891 (lookup_dwo_cutu): Don't try DWO if there's a DWP file.
5893 * dwarf2read.c (dw2_find_symbol_file): Initialize filename before
5894 calling init_cutu_and_read_dies.
5896 2013-03-27 Walfred Tedeschi <walfred.tedeschi@intel.com>
5898 * target-descriptions.c (maint_print_c_tdesc_cmd):
5899 Add case to parse structures as register types and
5902 2013-04-30 Walfred Tedeschi <walfred.tedeschi@intel.com>
5904 * MAINTAINERS (Write After Approval): Add myself to the list.
5906 2013-04-30 Joel Brobecker <brobecker@adacore.com>
5908 * sol-thread.c (rw_common): Change type of parameter "buf"
5910 (ps_pdwrite, ps_ptwrite): Cast parameter "buf" in call to
5911 rw_common to "gdb_byte *" instead of "char *".
5913 2013-04-30 Joel Brobecker <brobecker@adacore.com>
5915 * sol-thread.c (info_cb) [ti.ti_startfunc != 0]: Change type
5916 of local variable msym to const struct bound_minimal_symbol.
5917 Adjust use accordingly.
5918 [ti.ti_state == TD_THR_SLEEP]: Likewise.
5920 2013-04-30 Samuel Thibault <samuel.thibault@gnu.org>
5922 * i386gnu-nat.c (CREG_OFFSET): New macro.
5923 (creg_offset): New array.
5924 (CREG_ADDR): Use creg_offset instead of reg_offset.
5926 2013-04-30 Joel Brobecker <brobecker@adacore.com>
5928 * mep-tdep.c (mep_write_pc): Delete.
5929 (mep_gdbarch_init): Remove call to set_gdbarch_write_pc.
5930 Add call to set_gdbarch_pc_regnum.
5932 2013-04-30 Joel Brobecker <brobecker@adacore.com>
5934 * common/filestuff.c: Replace #include <dirent.h> by
5935 #include "gdb_dirent.h".
5937 2013-04-30 Joel Brobecker <brobecker@adacore.com>
5939 * common/filestuff.c: Replace #include <sys/stat.h> by
5940 #include "gdb_stat.h".
5942 2013-04-29 Pierre Muller <muller@sourceware.org>
5944 * dwarf2read.c (handle_DW_AT_stmt_list): Avoid ARI warning for
5945 editCase function rule.
5946 (get_DW_AT_signature_type): Likewise.
5948 2013-04-29 Joel Brobecker <brobecker@adacore.com>
5950 * m32r-tdep.c (m32r_write_pc): Delete.
5951 (m32r_gdbarch_init): Remove call to set_gdbarch_write_pc.
5952 Add call to set_gdbarch_pc_regnum.
5954 2013-04-29 Pierre Muller <muller@sourceware.org>
5956 * ./contrib/ari/gdb_ari.sh (editCase rule): Fix spelling error.
5958 2013-04-29 Joel Brobecker <brobecker@adacore.com>
5960 * dwarf2read.c (get_DW_AT_signature_type): Add ARI marker.
5962 2013-04-28 Yao Qi <yao@codesourcery.com>
5964 * solib-dsbt.c (fetch_loadmap): Re-indent.
5965 (displacement_from_map, enable_break2): Likewise.
5966 (dsbt_relocate_section_addresses): Likewise.
5968 2013-04-26 Joel Brobecker <brobecker@adacore.com>
5972 2013-04-25 Andreas Kaufmann <Andreas.Kaufmann@synopsys.com>
5975 * dwarf2read.c (process_full_comp_unit): Always create a static
5978 2013-04-25 Hui Zhu <hui@codesourcery.com>
5980 * breakpoint.c (build_target_command_list): Change loc->cond_bytecode
5981 to loc->cmd_bytecode.
5983 2013-04-24 Doug Evans <dje@google.com>
5985 * dwarf2read.c (setup_type_unit_groups): Fix comment.
5987 2013-04-22 Keith Seitz <keiths@redhat.com>
5989 * tracepoint.c (trace_save): Call the writer's start method.
5991 2013-04-24 Muhammad Bilal <mbilal@codesourcery.com>
5994 * cli/cli-decode.c (lookup_command): Show an error if there is no space
5997 2013-04-23 Tom Tromey <tromey@redhat.com>
5999 * common/filestuff.c: Check USE_WIN32API before including
6001 (HAVE_F_GETFD): New define.
6002 (mark_cloexec): Check HAVE_F_GETFD.
6003 (gdb_open_cloexec): Change 'mode' to unsigned long.
6004 (gdb_socketpair_cloexec): Check HAVE_SOCKETPAIR.
6005 (gdb_pipe_cloexec): Check HAVE_PIPE.
6006 * common/filestuff.h (gdb_open_cloexec): Change 'mode' to unsigned
6009 2013-04-23 Hui Zhu <hui@codesourcery.com>
6012 * breakpoint.c (bpstat_what): Add BPSTAT_WHAT_SINGLE to bp_dprintf.
6014 2013-04-23 Hui Zhu <hui@codesourcery.com>
6017 * breakpoint.c (dprintf_print_recreate): New.
6018 (save_breakpoints): Let it not save dprintf commands.
6019 (initialize_breakpoint_ops): Set dprintf_print_recreate.
6021 2013-04-22 Tom Tromey <tromey@redhat.com>
6024 * Makefile.in (SFILES): Add filestuff.c
6025 (COMMON_OBS): Add filestuff.o.
6026 (filestuff.o): New target.
6027 * auto-load.c (auto_load_objfile_script_1): Use
6029 * auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
6030 * cli/cli-cmds.c (shell_escape): Call close_most_fds.
6031 * cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
6032 * common/agent.c (gdb_connect_sync_socket): Use
6034 * common/filestuff.c: New file.
6035 * common/filestuff.h: New file.
6036 * common/linux-osdata.c (linux_common_core_of_thread)
6037 (command_from_pid, commandline_from_pid, print_source_lines)
6038 (linux_xfer_osdata_shm, linux_xfer_osdata_sem)
6039 (linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
6041 * common/linux-procfs.c (linux_proc_get_int)
6042 (linux_proc_pid_has_state): Use gdb_fopen_cloexec.
6043 * config.in, configure: Rebuild.
6044 * configure.ac: Don't check for sys/socket.h. Check for
6046 * corelow.c (core_open): Use gdb_open_cloexec.
6047 * dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
6048 * fork-child.c (fork_inferior): Call close_most_fds.
6049 * gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
6050 * inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
6051 * linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
6052 Use gdb_fopen_cloexec.
6053 (linux_proc_xfer_partial, linux_proc_xfer_spu): Use
6055 (linux_async_pipe): Use gdb_pipe_cloexec.
6056 * remote-fileio.c (remote_fileio_func_open): Use
6058 * remote.c (remote_file_put, remote_file_get): Use
6060 * ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
6062 * ser-tcp.c (net_open): Use gdb_socket_cloexec.
6063 * ser-unix.c (hardwire_open): Use gdb_open_cloexec.
6064 * solib.c (solib_find): Use gdb_open_cloexec.
6065 * source.c (openp, find_and_open_source): Use gdb_open_cloexec.
6066 * tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
6067 (tfile_open): Use gdb_open_cloexec.
6068 * tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
6069 * ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
6070 * xml-support.c (xml_fetch_content_from_file): Use
6072 * main.c (captured_main): Call notice_open_fds.
6074 2013-04-22 Edjunior Machado <emachado@linux.vnet.ibm.com>
6076 * remote-sim.c (dump_mem): Change the type of 'buf' parameter from
6077 'char *' to 'gdb_byte *'.
6078 (gdbsim_store_register): Change the type of 'tmp' from 'char' to
6081 2013-04-22 Yao Qi <yao@codesourcery.com>
6083 * infrun.c: Fix typo in comment.
6085 2013-04-22 Andrew Haley <aph@redhat.com>
6087 * arm-tdep.c (BranchDest): Cast result as "unsigned long",
6090 2013-04-20 Yao Qi <yao@codesourcery.com>
6092 * ctf.c (ctf_fetch_registers): Change the type of 'regs' from
6093 'char *' to 'gdb_byte *'. Cast the return value of
6094 'bt_ctf_get_char_array' to 'gdb_byte *'.
6096 2013-04-19 Pedro Alves <palves@redhat.com>
6098 * configure.ac (build_warnings): Replace -Wno-pointer-sign with
6100 * configure: Regenerate.
6102 2013-04-19 Pedro Alves <palves@redhat.com>
6104 * ser-tcp.c (net_read_prim): Cast second argument to recv to
6107 2013-04-19 Pedro Alves <palves@redhat.com>
6109 * monitor.c (monitor_write_memory, monitor_write_memory_bytes):
6110 Change type of 'myaddr' parameter to gdb_byte pointer.
6111 (monitor_write_memory_longlongs): Likewise. Cast 'myaddr' pointer
6112 to 'long long' pointer instead of to 'unsigned long long'.
6113 (monitor_write_memory_block, monitor_read_memory_single)
6114 (monitor_read_memory): Change type of 'myaddr' parameter to
6117 2013-04-19 Pedro Alves <palves@redhat.com>
6119 * record.c (validate_history_size): Make parameter 'setting'
6122 2013-04-19 Pedro Alves <palves@redhat.com>
6124 * ctf.c (ctf_write_uploaded_tsv, ctf_write_uploaded_tp): Add casts
6127 2013-04-19 Pedro Alves <palves@redhat.com>
6129 * cp-valprint.c (cp_print_class_member): Change type of 'fieldno'
6132 2013-04-19 Pedro Alves <palves@redhat.com>
6134 * ada-lang.c (print_it_exception): Add cast to gdb_byte *.
6135 * ada-tasks.c (read_fat_string_value): Likewise.
6137 2013-04-19 Pedro Alves <palves@redhat.com>
6139 * dwarf2-frame.c (execute_cfa_program): Make 'bytes_read' local
6140 unsigned. Pass 'tmp' to safe_read_uleb128 instead of the signed
6141 'offset', and adjust.
6143 2013-04-19 Pedro Alves <palves@redhat.com>
6145 * dwarf2read.c (dwarf2_get_dwz_file): Add cast to const char *.
6146 (read_index_from_section): Add cast to 'char *'.
6148 2013-04-19 Pedro Alves <palves@redhat.com>
6150 * xcoffread.c (xcoff_initial_scan): Add cast to 'char *'.
6152 2013-04-19 Pedro Alves <palves@redhat.com>
6154 * coff-pe-read.c (read_pe_exported_syms): Handle strings as char.
6156 2013-04-19 Pedro Alves <palves@redhat.com>
6158 * record-full.c (record_full_get_bookmark): Change local 'ret'
6159 type to char * and add cast to gdb_byte *.
6160 (record_full_goto_bookmark): Handle 'bookmark' argument as a
6162 * reverse.c (goto_bookmark_command): Add casts to gdb_byte *.
6164 2013-04-19 Pedro Alves <palves@redhat.com>
6166 * python/py-inferior.c (infpy_write_memory): Add cast to gdb_byte
6167 * python/py-prettyprint.c (print_string_repr): Change type of
6168 'output' local to char *. Add cast to gdb_byte * in
6169 LA_PRINT_STRING call.
6170 (print_children): Change type of 'output' local to char *.
6171 * python/py-value.c (valpy_string): Add cast to const char * in
6172 PyUnicode_Decode call.
6174 2013-04-19 Pedro Alves <palves@redhat.com>
6176 * remote-mips.c (mips_cksum): Rename 'data' parameter to 'datastr'
6177 and change its type to 'const char *'. Adjust.
6178 (mips_send_packet): Add cast to 'char *', and remove cast to
6180 (mips_receive_packet): Remove cast to 'unsigned char *'.
6181 (mips_load_srec): Use bfd_byte.
6182 (pmon_makeb64, pmon_zeroset): Make 'chksum' parameter unsigned.
6183 (pmon_checkset): Make 'value' parameter unsigned.
6185 2013-04-19 Pedro Alves <palves@redhat.com>
6187 * common/agent.c (agent_run_command): Add cast to gdb_byte *.
6189 2013-04-19 Pedro Alves <palves@redhat.com>
6191 * remote.c (remote_write_bytes_aux, compare_sections_command)
6193 (remote_search_memory, remote_hostio_pwrite, remote_hostio_pread)
6194 (remote_hostio_readlink, remote_bfd_iovec_pread)
6195 (remote_set_trace_notes): Use gdb_byte when RSP buffer is used as
6196 binary buffer, and char when buffer is used as string.
6197 * tracepoint.c (encode_source_string, tfile_write_uploaded_tp)
6198 (trace_save, tfile_open, traceframe_walk_blocks)
6199 (tfile_fetch_registers): Likewise.
6201 2013-04-19 Pedro Alves <palves@redhat.com>
6203 * ser-base.c (ser_base_write): Change prototype -- take 'void *'
6204 buffer and size_t size. Adjust.
6205 * ser-base.h (ser_base_write): Adjust.
6206 * ser-go32.c (cnts): Change type to size_t.
6207 (dos_write): Change prototype -- take 'void *'
6208 buffer and size_t size. Adjust.
6209 (dos_info): Print elements of 'cnts' as unsigned long.
6210 * serial.c (serial_write): Likewise.
6211 * serial.h (serial_write): Adjust.
6212 (struct serial_ops) <write>: Change prototype -- take 'void *'
6213 buffer and size_t size. Adjust.
6215 2013-04-19 Pedro Alves <palves@redhat.com>
6217 * c-lang.c (evaluate_subexp_c): Cast result of obstack_base to
6219 * linux-tdep.c (linux_make_mappings_corefile_notes): Likewise.
6221 2013-04-19 Pedro Alves <palves@redhat.com>
6223 * alpha-tdep.c (alpha_extract_return_value): Use
6224 regcache_cooked_read_unsigned to read 'v0'.
6226 2013-04-19 Pedro Alves <palves@redhat.com>
6228 * xtensa-tdep.c (execute_l32e, execute_s32e): Change type of
6229 parameters 'at', 'as' and 'offset' to uint32_t.
6231 2013-04-19 Pedro Alves <palves@redhat.com>
6233 * aarch64-tdep.c (aarch64_analyze_prologue): Change type of local
6234 'is64' to signed 'int'.
6236 2013-04-19 Pedro Alves <palves@redhat.com>
6238 * s390-tdep.c (is_rs, is_rsy, is_rx, is_rxy): Change type of 'd2'
6241 2013-04-19 Pedro Alves <palves@redhat.com>
6243 * ppc-linux-tdep.c (ppc_skip_trampoline_code): Change local
6244 'insnbuf' buffer type to unsigned int[].
6246 2013-04-19 Pedro Alves <palves@redhat.com>
6248 * mips-tdep.c (mips_read_pc): Change local 'pc' type to LONGEST.
6250 2013-04-19 Pedro Alves <palves@redhat.com>
6252 * mep-tdep.c (mep_get_insn): Change 'insn' parameter type to
6255 2013-04-19 Pedro Alves <palves@redhat.com>
6257 * alpha-tdep.c (heuristic_fence_post): Change type to int.
6258 (alpha_heuristic_proc_start): Adjust to check -1 instead of
6260 * mips-tdep.c (heuristic_fence_post): Change type to int.
6261 (heuristic_proc_start): Adjust to check -1 instead of UINT_MAX.
6263 2013-04-19 Pedro Alves <palves@redhat.com>
6265 * cris-tdep.c (usr_cmd_cris_version): Make unsigned.
6266 (struct gdbarch_tdep) <cris_version>: Make unsigned.
6267 (cris_spec_reg_applicable, cris_gdbarch_init): Adjust locals.
6269 2013-04-19 Pedro Alves <palves@redhat.com>
6271 * avr-tdep.c (avr_io_reg_read_command): New local 'bufstr'. Use
6272 it to get a string view of the byte buffer.
6273 * i386-cygwin-tdep.c (core_process_module_section): Change local 'buf'
6274 type to gdb_byte *. Adjust.
6275 * linux-tdep.c (linux_info_proc, linux_find_memory_regions_full):
6276 Change local to char *.
6277 * solib-darwin.c (find_program_interpreter): Change return type to
6279 (darwin_solib_get_all_image_info_addr_at_init): Adjust.
6280 * solib-dsbt.c (enable_break2): Change local 'buf' to char *.
6281 * solib-frv.c (enable_break2): Change local 'buf' to char *.
6282 * solib-spu.c (spu_current_sos): Add gdb_byte * cast.
6283 * solib-svr4.c (find_program_interpreter): Change return type to
6285 (enable_break): Change local 'interp_name' to char *.
6286 * spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
6287 * spu-tdep.c (spu_pseudo_register_read_spu): Add cast to 'char *'.
6288 (spu_pseudo_register_write_spu): Use char for string buffer.
6290 (info_spu_event_command, info_spu_signal_command): Add casts to
6293 2013-04-19 Pedro Alves <palves@redhat.com>
6295 * aarch64-tdep.c (aarch64_default_breakpoint): Change type to
6297 (aarch64_breakpoint_from_pc): Change return type to gdb_byte *.
6298 * ada-lang.c (ada_value_assign): Use gdb_byte.
6299 * alphanbsd-tdep.c (sigtramp_retcode): Change type to gdb_byte[].
6300 (alphanbsd_sigtramp_offset): Use gdb_byte.
6301 * arm-linux-tdep.c (arm_linux_arm_le_breakpoint)
6302 (arm_linux_arm_be_breakpoint, eabi_linux_arm_le_breakpoint)
6303 (eabi_linux_arm_be_breakpoint, arm_linux_thumb_be_breakpoint)
6304 (arm_linux_thumb_le_breakpoint, arm_linux_thumb2_be_breakpoint)
6305 (arm_linux_thumb2_le_breakpoint): Change type to gdb_byte[].
6306 * arm-tdep.c (arm_stub_unwind_sniffer)
6307 (arm_displaced_init_closure): Use gdb_byte.
6308 (arm_default_arm_le_breakpoint, arm_default_arm_be_breakpoint)
6309 (arm_default_thumb_le_breakpoint)
6310 (arm_default_thumb_be_breakpoint): Change type to gdb_byte[].
6311 * arm-tdep.h (struct gdbarch_tdep) <arm_breakpoint,
6312 thumb_breakpoint, thumb2_breakpoint>: Change type to gdb_byte *.
6313 * arm-wince-tdep.c (arm_wince_le_breakpoint)
6314 (arm_wince_thumb_le_breakpoint): Change type to gdb_byte[].
6315 * armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint)
6316 (arm_nbsd_arm_be_breakpoint, arm_nbsd_thumb_le_breakpoint)
6317 (arm_nbsd_thumb_be_breakpoint): Change type to gdb_byte[].
6318 * armobsd-tdep.c (arm_obsd_thumb_le_breakpoint)
6319 (arm_obsd_thumb_be_breakpoint): Change type to gdb_byte[].
6320 * cris-tdep.c (push_stack_item, cris_push_dummy_call)
6321 (cris_store_return_value, cris_extract_return_value): Use
6323 (constraint): Change type of parameter to char * from signed
6324 char*. Use gdb_byte.
6325 * dwarf2loc.c (read_pieced_value, write_pieced_value): Change type
6326 of local buffer to gdb_byte *.
6327 * dwarf2read.c (read_index_from_section): Use gdb_byte.
6328 (create_dwp_hash_table): Change type of locals to gdb_byte *.
6329 (add_address_entry): Change type of local buffer to gdb_byte[].
6330 * frv-tdep.c (frv_adjust_breakpoint_address, find_func_descr)
6331 (frv_push_dummy_call): Use gdb_byte.
6332 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code)
6333 (hppa_hpux_supply_ss_fpblock, hppa_hpux_supply_ss_wide)
6334 (hppa_hpux_supply_save_state): Use gdb_byte.
6335 * hppa-tdep.c (hppa32_push_dummy_call)
6336 (hppa64_convert_code_addr_to_fptr): Use gdb_byte.
6337 * ia64-tdep.c (extract_bit_field, replace_bit_field)
6338 (slotN_contents, replace_slotN_contents): Change type of parameter
6340 (fetch_instruction, ia64_pseudo_register_write)
6341 (ia64_register_to_value, ia64_value_to_register)
6342 (ia64_extract_return_value, ia64_store_return_value)
6343 (ia64_push_dummy_call): Use gdb_byte.
6344 * m32c-tdep.c (m32c_return_value): Remove cast.
6345 * m68hc11-tdep.c (m68hc11_pseudo_register_write)
6346 (m68hc11_push_dummy_call, m68hc11_store_return_value): Use
6348 * mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use gdb_byte.
6349 * mn10300-tdep.c (mn10300_store_return_value)
6350 (mn10300_breakpoint_from_pc, mn10300_push_dummy_call): Use
6352 * moxie-tdep.c (moxie_process_readu): Use gdb_byte.
6353 (moxie_process_record): Remove casts.
6354 * ppc-ravenscar-thread.c (supply_register_at_address)
6355 (ppc_ravenscar_generic_store_registers): Use gdb_byte.
6356 * ravenscar-thread.c (get_running_thread_id): Use gdb_byte.
6357 * remote-m32r-sdi.c (m32r_fetch_register): Use gdb_byte.
6358 * remote-mips.c (mips_xfer_memory): Use gdb_byte.
6359 * remote.c (compare_sections_command): Use gdb_byte.
6360 * score-tdep.c (score7_free_memblock): Change type of parameter to
6362 * sh-tdep.c (sh_justify_value_in_reg): Change return type to
6363 gdb_byte *. Use gdb_byte.
6364 (sh_push_dummy_call_fpu): Use gdb_byte.
6365 (sh_extract_return_value_nofpu, sh_extract_return_value_fpu)
6366 (sh_store_return_value_nofpu, sh_store_return_value_fpu)
6367 (sh_register_convert_to_virtual, sh_register_convert_to_raw):
6368 Change parameter type to 'gdb_byte *'. Use gdb_byte.
6369 (sh_pseudo_register_read, sh_pseudo_register_write): Use gdb_byte.
6370 * sh64-tdep.c (sh64_push_dummy_call): Use gdb_byte.
6371 (sh64_store_return_value, sh64_register_convert_to_virtual):
6372 Change parameter type to 'gdb_byte *'. Use gdb_byte.
6373 (sh64_pseudo_register_write): Use gdb_byte.
6374 * solib-darwin.c (darwin_current_sos): Add casts to 'gdb_byte *'.
6375 * solib-irix.c (fetch_lm_info): Likewise. Use gdb_byte for byte
6377 (irix_current_sos): Use gdb_byte.
6378 * solib-som.c (som_current_sos): Use gdb_byte.
6379 * sparc-ravenscar-thread.c (supply_register_at_address)
6380 (sparc_ravenscar_generic_store_registers): Use gdb_byte.
6381 * spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
6382 * spu-tdep.c (spu_get_overlay_table): Use gdb_byte.
6383 * tic6x-tdep.c (tic6x_breakpoint_from_pc): Change return type to
6385 * tic6x-tdep.h (struct gdbarch_tdep) <breakpoint>: Change type to
6387 * tracepoint.c (tfile_fetch_registers): Use gdb_byte.
6388 * xstormy16-tdep.c (xstormy16_extract_return_value)
6389 (xstormy16_store_return_value): Change parameter type to
6390 'gdb_byte *'. Adjust.
6391 (xstormy16_push_dummy_call): Use gdb_byte.
6392 * xtensa-tdep.c (xtensa_scan_prologue, call0_ret)
6393 (call0_analyze_prologue, execute_code): Use gdb_byte.
6395 2013-04-19 Vladimir Kargov <kargov@gmail.com>
6396 Pedro Alves <palves@redhat.com>
6398 * i387-tdep.c (i387_print_float_info): Use gdb_byte for pointer to
6401 2013-04-17 Doug Evans <dje@google.com>
6403 * dwarf2read.c (struct signatured_type): New member type.
6404 (struct attribute): Replace member signatured_type with signature.
6405 (DW_SIGNATURE): Replaces DW_SIGNATURE_TYPE.
6406 (read_call_site_scope): Call follow_die_ref instead of
6407 follow_die_ref_or_sig.
6408 (read_structure_type): Rewrite handling of signatured types.
6409 (read_enumeration_type): Ditto.
6410 (read_attribute_value): Update.
6411 (build_error_marker_type): New function.
6412 (lookup_die_type): Add assert. Rewrite handling of signatured types.
6413 Don't call error for bad types, just build an error marker type.
6414 (dump_die_shallow): Update.
6415 (follow_die_sig_1): Renamed from follow_die_sig.
6416 Don't call error for bad types, instead return NULL.
6417 (follow_die_sig): New function.
6418 (get_signatured_type, get_DW_AT_signature_type): New functions.
6420 2013-04-17 Yufeng Zhang <yufeng.zhang@arm.com>
6422 * aarch64-tdep.c (aarch64_write_pc): Removed.
6423 (aarch64_gdbarch_init): Remove set_gdbarch_write_pc of the above
6426 2013-04-17 Yao Qi <yao@codesourcery.com>
6428 * top.c (print_gdb_configuration): Print configure-time
6429 parameter on using libbabeltrace or not.
6431 2013-04-16 Pedro Alves <palves@redhat.com>
6433 * copyright.py (EXCLUDE_LIST): Add gdb/common/glibc_thread_db.h.
6435 2013-04-16 Pedro Alves <palves@redhat.com>
6437 * common/glibc_thread_db.h: Update from upstream glibc
6438 (git 568035b7874a099087b77f7bba3e36a1173787b0).
6440 2013-04-16 Pedro Alves <palves@redhat.com>
6442 * common/gdb_thread_db.h [!HAVE_THREAD_DB_H]: Factor out to ...
6443 * common/glibc_thread_db.h: ... this new file ...
6444 * common/gdb_thread_db.h [!HAVE_THREAD_DB_H]: ... and include it.
6446 2013-04-16 Will Newton <will.newton@gmail.com>
6447 Pedro Alves <palves@redhat.com>
6451 * common/gdb_thread_db.h (LIBTHREAD_DB_SO)
6452 (LIBTHREAD_DB_SEARCH_PATH): Move outside of #ifdef
6455 2013-04-16 Pedro Alves <palves@redhat.com>
6456 Eli Zaretskii <eliz@gnu.org>
6458 * NEWS: Mention "set foo unlimited".
6460 2013-04-15 Doug Evans <dje@google.com>
6462 * dwarf2read.c (struct dwo_file): Replace member "cus" with "cu".
6463 (struct create_dwo_cu_data): Renamed from create_dwo_info_table_data.
6464 (create_dwo_cu_reader): Renamed from
6465 create_dwo_debug_info_hash_table_reader.
6466 (create_dwo_cu): Renamed from create_dwo_debug_info_hash_table.
6467 Remove support for multiple CUs in a DWO file.
6468 (open_and_init_dwo_file, lookup_dwo_cutu): Update.
6470 * dwarf2read.c (create_debug_types_hash_table): Use hex_string
6472 (lookup_dwo_unit, create_dwo_debug_info_hash_table_reader): Ditto.
6473 (create_dwo_in_dwp): Ditto.
6475 2013-04-15 Tom Tromey <tromey@redhat.com>
6477 * NEWS: Move recent entries into "since 7.6" section.
6479 2013-04-15 Tom Tromey <tromey@redhat.com>
6483 * break-catch-throw.c (struct exception_catchpoint)
6484 <exception_rx, pattern>: New fields.
6485 (fetch_probe_arguments, dtor_exception_catchpoint)
6486 (check_status_exception_catchpoint)
6487 (print_one_detail_exception_catchpoint): New functions.
6488 (handle_gnu_v3_exceptions): Add "except_rx" argument.
6489 Compile regular expression if needed.
6490 (extract_exception_regexp): New function.
6491 (catch_exception_command_1): Use extract_exception_regexp.
6492 (compute_exception): Use fetch_probe_arguments.
6493 (initialize_throw_catchpoint_ops): Set dtor, print_one_detail,
6494 and check_status fields.
6495 * cp-abi.c (cplus_typename_from_type_info): New function.
6496 * cp-abi.h (cplus_typename_from_type_info): Declare.
6497 (struct cp_abi_ops) <get_typename_from_type_info>: New field.
6498 * gdb_regex.h (compile_rx_or_error): Declare.
6499 * gnu-v3-abi.c (gnuv3_get_typename_from_type_info): Update
6501 (init_gnuv3_ops): Set get_type_from_type_info field.
6502 * probe.c (compile_rx_or_error): Move...
6503 * utils.c (compile_rx_or_error): ... here.
6505 2013-04-15 Tom Tromey <tromey@redhat.com>
6509 * break-catch-throw.c (compute_exception): New function.
6510 (exception_funcs): New global.
6511 (_initialize_break_catch_throw): Create $_exception.
6512 * cp-abi.c (cplus_type_from_type_info): New function.
6513 * cp-abi.h (cplus_type_from_type_info): Declare.
6514 (struct cp_abi_ops) <get_type_from_type_info>: New field.
6515 * gnu-v3-abi.c (gnuv3_get_typename_from_type_info)
6516 (gnuv3_get_type_from_type_info): New functions.
6517 (init_gnuv3_ops): Set get_type_from_type_info ABI field.
6519 2013-04-15 Tom Tromey <tromey@redhat.com>
6521 * break-catch-throw.c (struct exception_names): New.
6522 (exception_functions): Change type.
6523 (re_set_exception_catchpoint): Look for SDT probes.
6525 2013-04-15 Tom Tromey <tromey@redhat.com>
6528 * break-catch-throw.c (exception_functions): New global.
6529 (gnu_v3_exception_catchpoint_ops): Move earlier.
6530 (struct exception_catchpoint): New.
6531 (classify_exception_breakpoint): Rewrite.
6532 (re_set_exception_catchpoint): New function.
6533 (handle_gnu_v3_exceptions): Return void. Use init_catchpoint.
6534 Allocate a struct exception_catchpoint.
6535 (catch_exception_command_1): Update.
6536 (initialize_throw_catchpoint_ops): Set 're_set' method.
6538 2013-04-15 Tom Tromey <tromey@redhat.com>
6540 * Makefile.in (SFILES): Add break-catch-throw.c
6541 (COMMON_OBS): Add break-catch-throw.o.
6542 * break-catch-throw.c: New file.
6543 * breakpoint.c: Move exception-catching code to new file.
6544 (ep_parse_optional_if_clause): No longer static.
6545 * breakpoint.h (ep_parse_optional_if_clause): Declare.
6547 2013-04-15 Tom Tromey <tromey@redhat.com>
6551 * breakpoint.c (watchpoint_exp_is_const): Add OP_TYPEID.
6552 * c-exp.y (TYPEID): New token.
6553 (exp): Add new TYPEID productions.
6554 (ident_tokens): Add "typeid".
6555 * cp-abi.c (cplus_typeid, cplus_typeid_type): New functions.
6556 * cp-abi.h (cplus_typeid, cplus_typeid_type): Declare.
6557 (struct cp_abi_ops) <get_typeid, get_typeid_type>: New fields.
6558 * eval.c (evaluate_subexp_standard) <OP_TYPEID>: New case.
6559 * expprint.c (dump_subexp_body_standard) <OP_TYPEID>: New
6561 * gnu-v3-abi.c (std_type_info_gdbarch_data): New global.
6562 (build_std_type_info_type, gnuv3_get_typeid_type)
6563 (gnuv3_get_typeid): New functions.
6564 (init_gnuv3_ops): Initialize std_type_info_gdbarch_data. Set
6565 new fields on ABI object.
6566 * parse.c (operator_length_standard) <OP_TYPEID>: New case.
6567 * std-operator.def (OP_TYPEID): New.
6569 2013-04-15 Tom Tromey <tromey@redhat.com>
6571 * elfread.c (elf_symtab_read): Install versioned symbol under
6572 unversioned name as well.
6574 2013-04-15 Tom Tromey <tromey@redhat.com>
6577 * c-lang.c (cplus_language_defn): Use gdb_demangle.
6578 * c-typeprint.c (c_type_print_base): Use gdb_demangle.
6579 * cp-support.c (mangled_name_to_comp): Use gdb_demangle.
6580 (gdb_demangle): New function.
6581 * cp-support.h (gdb_demangle): Declare.
6582 * dwarf2read.c (dwarf2_physname, fixup_partial_die)
6583 (dwarf2_name): Use gdb_demangle.
6584 * gdbtypes.c (check_stub_method): Use gdb_demangle.
6585 * gnu-v3-abi.c (gnuv3_rtti_type): Strip @plt and version
6587 (gnuv3_print_method_ptr): Use gdb_demangle.
6588 * jv-lang.c (java_demangle): Use gdb_demangle.
6589 * jv-typeprint.c (java_type_print_base): Use gdb_demangle.
6590 * language.c (unk_lang_demangle): Use gdb_demangle.
6591 * symtab.c (symbol_find_demangled_name)
6592 (demangle_for_lookup): Use gdb_demangle.
6594 2013-04-15 Tom Tromey <tromey@redhat.com>
6598 * breakpoint.c (enum exception_event_kind) <EX_EVENT_RETHROW>:
6600 (classify_exception_breakpoint): New function.
6601 (print_it_exception_catchpoint, print_one_exception_catchpoint)
6602 (print_mention_exception_catchpoint)
6603 (print_recreate_exception_catchpoint, handle_gnu_v3_exceptions)
6604 (catch_exception_command_1): Handle "rethrow" catchpoint.
6605 (catch_rethrow_command): New function.
6606 (_initialize_breakpoint): Add "catch rethrow" command.
6608 2013-04-15 Pierre Muller <muller@sourceware.org>
6610 * contrib/ari/gdb_ari.sh (write_pc rule): Do not consider
6611 set_gdbarch_write_pc as deprecated anymore.
6613 2013-04-15 Joel Brobecker <brobecker@adacore.com>
6615 * spu-tdep.c (spu_write_pc): Add empty line after local variable
6618 2013-04-13 Yao Qi <yao@codesourcery.com>
6620 * ctf.c (_initialize_ctf): Include "completer.h".
6621 Call add_target_with_completer instead of add_target.
6623 2013-04-12 Jan Kratochvil <jan.kratochvil@redhat.com>
6625 Fix GDB regression related to PR binutils/14813.
6626 * jit.c (mem_bfd_iovec_close): Return 0 for success.
6627 * minidebug.c (lzma_close): Add return value comment.
6628 * remote.c (remote_bfd_iovec_close): Return 0 for success.
6629 * solib-spu.c (spu_bfd_iovec_close): Likewise.
6630 * spu-linux-nat.c (spu_bfd_iovec_close): Likewise.
6632 2013-04-12 Jan Kratochvil <jan.kratochvil@redhat.com>
6634 * config.in: Regenerate.
6636 2013-04-12 Tom Tromey <tromey@redhat.com>
6638 * dwarf2-frame.c (struct comp_unit) <dwarf_frame_buffer>: Now
6640 * dwarf2read.c (struct dwarf2_section_info) <buffer>: Now const.
6641 (struct die_reader_specs) <buffer>: Likewise.
6642 (die_reader_func_ftype): Make 'info_ptr' const.
6643 (struct line_header) <include_dirs, statement_program_start,
6644 statement_program_end>: Now const.
6645 (struct file_entry) <name>: Likewise.
6646 (struct partial_die_info) <sibling>: Likewise.
6647 (struct dwarf_block) <data>: Likewise.
6648 (dwarf2_read_section): Remove cast.
6649 (dwarf2_get_section_info): Make 'bufp' const.
6650 (read_index_from_section): Constify.
6651 (dw2_get_file_names_reader): Make 'info_ptr' const.
6652 (dw2_get_primary_filename_reader): Likewise.
6653 (read_comp_unit_head): Make 'info_ptr' and return type const.
6654 (read_and_check_comp_unit_head, read_and_check_type_unit_head):
6656 (read_abbrev_offset): Constify.
6657 (dwarf2_create_include_psymtab): Make 'name' const.
6658 (create_debug_types_hash_table): Update.
6659 (read_cutu_die_from_dwo): Make 'result_info_ptr' const.
6660 (init_cutu_and_read_dies, init_cutu_and_read_dies_no_follow):
6662 (process_psymtab_comp_unit_reader, build_type_psymtabs_reader)
6663 (load_partial_comp_unit_reader): Make 'info_ptr' const.
6664 (read_comp_units_from_section): Constify.
6665 (peek_abbrev_code, peek_die_abbrev, skip_children, skip_one_die)
6666 (locate_pdi_sibling, load_full_comp_unit_reader): Make 'info_ptr'
6668 (dwarf2_compute_name, setup_type_unit_groups): Constify.
6669 (create_dwo_debug_info_hash_table): Make 'info_ptr' const.
6670 (create_dwp_hash_table, dwarf2_ranges_read)
6671 (dwarf2_record_block_ranges): Constify.
6672 (read_die_and_children, read_die_and_siblings_1)
6673 (read_die_and_siblings): Make 'info_ptr' and 'new_info_ptr'
6675 (read_full_die_1, read_full_die): Make 'info_ptr' const.
6676 (abbrev_table_read_table): Constify.
6677 (load_partial_dies): Make 'info_ptr' const.
6678 (read_partial_die, read_attribute_value, read_attribute): Make
6679 'info_ptr' and return type const.
6680 (read_address, read_initial_length)
6681 (read_checked_initial_length_and_offset, read_offset)
6682 (read_offset_1, read_n_bytes, read_direct_string): Make 'buf'
6684 (read_direct_string): Make 'buf' and return type const.
6685 (read_indirect_string_at_offset, read_indirect_string_from_dwz)
6686 (read_indirect_string): Make return type const.
6687 (read_unsigned_leb128, read_signed_leb128): Make 'buf' const.
6688 (read_addr_index_from_leb128, dwarf2_read_addr_index_reader): Make
6690 (read_str_index): Make return type const.
6691 (add_include_dir): Make 'include_dir' const.
6692 (add_file_name): Make 'name' const.
6693 (dwarf_decode_line_header): Constify.
6694 (psymtab_include_file_name): Make return type const.
6695 (dwarf_decode_lines_1, dwarf_decode_lines): Constify.
6696 (dwarf2_start_subfile): Make 'filename' const.
6697 (dwarf2_const_value_attr): Make 'bytes' const.
6698 (read_signatured_type_reader): Make 'info_ptr' const.
6699 (decode_locdesc): Constify.
6700 (skip_form_bytes): Make 'bytes', 'buffer_end', and return type
6702 (skip_unknown_opcode): Make 'opcode_definitions', 'mac_ptr',
6703 'mac_end', and return type const.
6704 (dwarf_parse_macro_header): Make 'mac_ptr' and return type const.
6705 (dwarf_decode_macro_bytes): Make 'mac_ptr', 'mac_end', and return
6707 (per_cu_header_read_in): Constify.
6708 * symfile.h (dwarf2_get_section_info): Update.
6710 2013-04-12 Tom Tromey <tromey@redhat.com>
6712 * symtab.h (struct general_symbol_info) <value.bytes>: Make const.
6714 2013-04-12 Eli Zaretskii <eliz@gnu.org>
6716 * NEWS: Mention "show configuration", --configuration.
6717 * top.c (print_gdb_configuration): New function, displays the
6718 details about GDB configure-time parameters.
6719 (print_gdb_version): Mention "show configuration".
6720 * cli/cli-cmds.c (show_configuration): New function.
6721 (_initialize_cli_cmds): Add the "show configuration" command.
6722 * main.c (captured_main) <print_configuration>: New static var.
6723 <long_options>: Use it.
6724 If --configuration was given, call print_gdb_configuration.
6726 2013-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
6727 Pedro Alves <palves@redhat.com>
6729 * Makefile.in (HAVE_NATIVE_GCORE_TARGET): New.
6730 (generated_files): Add gcore.
6731 (install-only, uninstall): Add gcore if HAVE_NATIVE_GCORE_TARGET or
6732 HAVE_NATIVE_GCORE_HOST.
6734 * NEWS (Changes since GDB 7.6): Mention newly installed gcore.
6735 * config/alpha/alpha-osf3.mh, config/i386/fbsd.mh,
6736 config/i386/fbsd64.mh, config/i386/i386gnu.mh, config/i386/i386sol2.mh,
6737 config/i386/sol2-64.mh, config/mips/irix5.mh, config/mips/irix6.mh,
6738 config/powerpc/fbsd.mh, config/sparc/fbsd.mh, config/sparc/sol2.mh:
6739 Add HAVE_NATIVE_GCORE_HOST.
6740 * configure: Regenerate.
6741 * configure.ac (HAVE_NATIVE_GCORE_TARGET): New, set it, AC_SUBST it.
6742 New AC_SUBST fir GDB_TRANSFORM_NAME and GCORE_TRANSFORM_NAME. New
6743 AC_CONFIG_FILES for gcore.
6744 * configure.tgt: Add gdb_have_gcore to the initial comment. Set
6746 * gdb_gcore.sh: Rename to ...
6747 * gcore.in: ... here. Remove gcore.sh comment. Use GDB_TRANSFORM_NAME
6748 and GCORE_TRANSFORM_NAME substitutions.
6750 Fix parsing tabs in ${gdb_target_obs}.
6751 * configure.tgt (gdb_have_gcore): Replace case with for and if.
6753 2013-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
6755 * remote.c (unpush_and_perror): Add output message final dot.
6757 2013-04-11 Yao Qi <yao@codesourcery.com>
6759 * tracepoint.c (tfile_interp_line): Fit parameters line and
6762 2013-04-10 Joel Brobecker <brobecker@adacore.com>
6764 * solib.c (solib_map_sections): Remove code overwriting
6765 SO->SO_NAME with the bfd's filename.
6767 2013-04-10 Pedro Alves <palves@redhat.com>
6769 * cli/cli-decode.c (integer_unlimited_completer): New function.
6770 (add_setshow_integer_cmd, add_setshow_uinteger_cmd)
6771 (add_setshow_zuinteger_unlimited_cmd): Install the "unlimited"
6773 * cli/cli-setshow.c: Include "cli/cli-utils.h".
6774 (is_unlimited_literal): New function.
6775 (do_set_command): Handle literal "unlimited" arguments.
6776 * frame.c (_initialize_frame) <set backtrace limit>: Document
6778 * printcmd.c (_initialize_printcmd) <set print
6779 max-symbolic-offset>: Add help text.
6780 * record-full.c (_initialize_record_full) <set record full
6781 insn-number-max>: Likewise.
6782 * record.c (_initialize_record) <set record
6783 instruction-history-size, set record function-call-history-size>:
6785 * ser-tcp.c (_initialize_ser_tcp) <set tcp connect-timeout>: Add
6787 * tracepoint.c (_initialize_tracepoint) <set trace-buffer-size>:
6789 * source.c (_initialize_source) <set listsize>: Add help text.
6790 * utils.c (initialize_utils) <set height, set width>: Likewise.
6791 <set pagination>: Mention "set height unlimited".
6792 * valprint.c (_initialize_valprint) <set print elements, set print
6793 repeats>: Document "unlimited".
6795 2013-04-10 Pedro Alves <palves@redhat.com>
6797 * cli/cli-cmds.c (quit_command): Call query_if_trace_running
6798 instead of disconnect_tracing.
6799 * infcmd.c (detach_command, disconnect_command): Call
6800 query_if_trace_running. Adjust.
6801 * top.c: Include "tracepoint.h".
6802 (quit_target): Delete. Contents moved ...
6803 (quit_force): ... here. Wrap each stage of teardown in
6804 TRY_CATCH. Call disconnect_tracing before detaching.
6806 2013-04-10 Hui Zhu <hui@codesourcery.com>
6807 Yao Qi <yao@codesourcery.com>
6809 * configure.ac: Check libbabeltrace is installed.
6810 * config.in: Regenerate.
6811 * configure: Regenerate.
6812 * Makefile.in (LIBBABELTRACE): New.
6813 (CLIBS): Add LIBBABELTRACE.
6814 * ctf.c: Include "exec.h".
6815 (CTF_EVENT_ID_STATUS, CTF_EVENT_ID_TSV_DEF): New macros.
6816 (CTF_EVENT_ID_TP_DEF, ctf_save_write_int32): New macros.
6817 (ctf_save_metadata_header): Define new type aliases in
6819 (ctf_write_header): Define event type "tsv_def" and "tp_def"
6820 in metadata. Start a new faked packet for trace status.
6821 (ctf_write_status): Write trace status to CTF.
6822 (ctf_write_uploaded_tsv): Write TSV to CTF.
6823 (ctf_write_uploaded_tp): Write tracepoint definition to CTF.
6824 (ctf_write_definition_end): End the faked packet.
6826 (ctx, ctf_iter, trace_dirname): New.
6827 (start_pos): New variable.
6828 (ctf_destroy, ctf_open_dir, ctf_open): New.
6829 (SET_INT32_FIELD, SET_ARRAY_FIELD, SET_STRING_FIELD): New
6831 (ctf_read_tsv, ctf_read_tp, ctf_close, ctf_files_info): New.
6832 (ctf_fetch_registers, ctf_xfer_partial): New.
6833 (ctf_get_trace_state_variable_value): New.
6834 (ctf_get_tpnum_from_frame_event): New.
6835 (ctf_get_traceframe_address): New.
6836 (ctf_trace_find, ctf_has_stack): New.
6837 (ctf_has_registers, ctf_traceframe_info, init_ctf_ops): New.
6838 (ctf_get_trace_status, ctf_read_status): New.
6839 (_initialize_ctf): New.
6840 * tracepoint.c (get_tracepoint_number): New
6841 (get_uploaded_tsv): Remove 'static'.
6842 (struct traceframe_info, trace_regblock_size): Move it to ...
6843 * tracepoint.h: ... here.
6844 (get_tracepoint_number): Declare it.
6845 (get_uploaded_tsv): Declare it.
6847 * NEWS: Mention new configure option.
6849 2013-04-10 Pedro Alves <palves@redhat.com>
6850 Hui Zhu <hui@codesourcery.com>
6852 * breakpoint.c (dprintf_re_set): New.
6853 (initialize_breakpoint_ops): Set dprintf_breakpoint_ops re_set
6856 2013-04-09 Joel Brobecker <brobecker@adacore.com>
6858 * configure.tgt (gdb_target_obs) <powerpc-*-aix* | rs6000-*-*>:
6859 Remove solib-svr4.o from the list.
6861 2013-04-09 Joel Brobecker <brobecker@adacore.com>
6863 * varobj.c (update_dynamic_varobj_children) [!HAVE_PYTHON]:
6864 Use gdb_assert_not_reached instead of invalid boolean expression.
6866 2013-04-09 Pedro Alves <palves@redhat.com>
6868 * remote.c (unpush_and_perror): New function.
6869 (readchar, remote_serial_write): Use it.
6871 2013-04-09 Markus Metzger <markus.t.metzger@intel.com>
6873 * NEWS: Mention new btrace RSP packets.
6875 2013-04-08 Tom Tromey <tromey@redhat.com>
6877 * symmisc.c (dump_msymbols): Cast fprintf_filtered argument to
6880 2013-04-08 Tom Tromey <tromey@redhat.com>
6882 * maint.c (print_bfd_section_info): Print the section index.
6883 * symmisc.c (dump_msymbols): Print the section index.
6885 2013-04-08 Tom Tromey <tromey@redhat.com>
6888 * blockframe.c (find_pc_partial_function_gnu_ifunc): Check
6889 SYMBOL_SECTION, not SYMBOL_OBJ_SECTION.
6890 * breakpoint.c (resolve_sal_pc): Update.
6891 * elfread.c (elf_gnu_ifunc_record_cache): Update.
6892 * findvar.c (struct minsym_lookup_data) <objfile>: New field.
6893 (minsym_lookup_iterator_cb): Use it.
6894 (default_read_var_value): Update.
6895 * hppa-hpux-tdep.c (hppa64_hpux_in_solib_call_trampoline):
6897 * infcmd.c (jump_command): Update.
6898 * linespec.c (minsym_found): Update.
6899 * maint.c (maintenance_translate_address): Update.
6900 * minsyms.c (lookup_minimal_symbol_by_pc_section_1): Update.
6901 (prim_record_minimal_symbol_full): Don't set SYMBOL_OBJ_SECTION.
6902 * parse.c (write_exp_msymbol): Update.
6903 * printcmd.c (address_info): Update.
6904 * psymtab.c (find_pc_sect_psymbol): Update.
6905 (fixup_psymbol_section): Check SYMBOL_SECTION, not
6907 (add_psymbol_to_bcache): Correctly initialize SYMBOL_SECTION.
6908 Don't initialize SYMBOL_OBJ_SECTION.
6909 * spu-tdep.c (spu_catch_start): Update.
6910 * stabsread.c (define_symbol): Don't set SYMBOL_SECTION.
6911 * symmisc.c (dump_msymbols, print_symbol): Update.
6912 * symtab.c (fixup_section): Don't set 'obj_section'. Change
6913 how fallback section is computed.
6914 (fixup_symbol_section): Update.
6915 (find_pc_sect_symtab, find_function_start_sal, skip_prologue_sal):
6917 (allocate_symbol, initialize_symbol, allocate_template_symbol):
6918 Initialize SYMBOL_SECTION.
6919 * symtab.h (struct general_symbol_info) <section>: Update comment.
6920 <obj_section>: Remove.
6921 (SYMBOL_OBJ_SECTION): Add 'objfile' argument. Rewrite.
6922 (SYMBOL_OBJFILE): New macro.
6924 2013-04-08 Tom Tromey <tromey@redhat.com>
6926 * coffread.c (record_minimal_symbol): Update.
6927 * dbxread.c (record_minimal_symbol): Update.
6928 * elfread.c (record_minimal_symbol): Update.
6929 * machoread.c (macho_symtab_add_minsym): Update.
6930 * mdebugread.c (record_minimal_symbol, parse_partial_symbols):
6932 * minsyms.c (prim_record_minimal_symbol): Update.
6933 (prim_record_minimal_symbol_full): Remove 'bfd_section'
6935 (prim_record_minimal_symbol_and_info): Likewise.
6936 * minsyms.h (prim_record_minimal_symbol_full)
6937 (prim_record_minimal_symbol_and_info): Update.
6938 * symtab.c (allocate_symbol, initialize_symbol)
6939 (allocate_template_symbol): Initialize SYMBOL_SECTION.
6940 * xcoffread.c (record_minimal_symbol, scan_xcoff_symtab):
6943 2013-04-08 Tom Tromey <tromey@redhat.com>
6946 * solib-som.c (som_solib_section_offsets): Use BFD section
6947 indices. Set offsets for all sections.
6948 * somread.c (som_symtab_read): Compute BFD section for
6949 symbol. Use prim_record_minimal_symbol_and_info.
6950 (som_symfile_read): Fix comment.
6951 (struct find_section_offset_arg): New.
6952 (find_section_offset, set_section_index): New functions.
6953 (som_symfile_offsets): Use set_section_index to compute
6956 2013-04-08 Tom Tromey <tromey@redhat.com>
6958 * coffread.c (cs_to_section): Use gdb_bfd_section_index.
6959 * elfread.c (record_minimal_symbol, elf_symtab_read): Use
6960 gdb_bfd_section_index.
6961 * gdb_bfd.c (gdb_bfd_section_index, gdb_bfd_count_sections):
6963 * gdb_bfd.h (gdb_bfd_section_index, gdb_bfd_count_sections):
6965 * machoread.c (macho_symtab_add_minsym, macho_symfile_offsets):
6967 * objfiles.c (add_to_objfile_sections_full): New function.
6968 (add_to_objfile_sections): Use it.
6969 (build_section_table): Rewrite.
6970 (objfile_relocate1): Use gdb_bfd_section_index. Update.
6971 * objfiles.h (obj_section_offset): Use gdb_bfd_section_index.
6972 (struct objfile) <sections>: Update comment.
6973 (ALL_OBJFILE_OSECTIONS): Skip sections where the_bfd_section
6975 (ALL_OBJSECTIONS): Use it.
6976 * solib-dsbt.c (dsbt_relocate_main_executable): Update.
6977 * solib-frv.c (frv_relocate_main_executable): Update.
6978 * solib-target.c (solib_target_relocate_section_addresses):
6979 Use gdb_bfd_section_index.
6980 * symfile.c (build_section_addr_info_from_section_table):
6981 Use gdb_bfd_section_index.
6982 (build_section_addr_info_from_bfd, place_section): Likewise.
6983 * symtab.c (fixup_section): Update.
6984 * xcoffread.c (find_targ_sec): Use gdb_bfd_section_index.
6986 2013-04-08 Tom Tromey <tromey@redhat.com>
6988 * minsyms.h (struct bound_minimal_symbol): New.
6989 (lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol.
6990 Remove objfile argument.
6991 (lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc):
6992 Return bound_minimal_symbol.
6993 * minsyms.c (lookup_minimal_symbol_by_pc_1)
6994 (lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc):
6995 Return bound_minimal_symbol.
6996 (in_gnu_ifunc_stub): Update.
6997 (lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol.
6998 Remove 'objfile_p' argument.
6999 (lookup_solib_trampoline_symbol_by_pc): Update.
7000 * ada-tasks.c, amd64-windows-tdep.c, arm-tdep.c,
7001 arm-wince-tdep.c, block.c, blockframe.c, breakpoint.c, btrace.c,
7002 c-valprint.c, dwarf2loc.c, elfread.c, frame.c, frv-tdep.c,
7003 glibc-tdep.c, gnu-v2-abi.c, gnu-v3-abi.c, hppa-hpux-tdep.c,
7004 i386-tdep.c, ia64-tdep.c, infcall.c, infcmd.c, jit.c,
7005 linux-fork.c, m32c-tdep.c, m68hc11-tdep.c, maint.c,
7006 mips-tdep.c, p-valprint.c, parse.c, ppc-linux-tdep.c,
7007 ppc-sysv-tdep.c, printcmd.c, rs6000-tdep.c, sh64-tdep.c,
7008 stack.c, symtab.c, tui/tui-disasm.c: Update.
7010 2013-04-08 Tom Tromey <tromey@redhat.com>
7012 * ada-lang.c (ada_decode_symbol): Check and set 'ada_mangled'.
7013 Use symbol's obstack, not an objfile.
7014 * coffread.c (process_coff_symbol): Update.
7015 * dwarf2read.c (fixup_go_packaging, new_symbol_full): Update.
7016 * jv-lang.c (add_class_symbol): Update.
7017 * mdebugread.c (new_symbol): Update.
7018 * minsyms.c (prim_record_minimal_symbol_full)
7019 (terminate_minimal_symbol_table): Update.
7020 * psymtab.c (add_psymbol_to_bcache): Clear entire symbol. Update.
7021 * stabsread.c (define_symbol, read_enum_type): Update.
7022 * symtab.c (symbol_set_demangled_name, symbol_get_demangled_name):
7023 Handle Ada specially.
7024 (symbol_set_language): Add 'obstack' argument.
7025 (symbol_set_names): Update.
7026 (symbol_natural_name, symbol_demangled_name): Always use
7028 * symtab.h (struct general_symbol_info)
7029 <language_specific::obstack>: New field.
7030 <ada_mangled>: New field.
7031 (SYMBOL_SET_LANGUAGE): Add 'obstack' argument.
7032 (symbol_set_language): Update.
7034 2013-04-08 Tom Tromey <tromey@redhat.com>
7036 * symtab.c (symbol_init_cplus_specific, symbol_set_demangled_name):
7037 Take an obstack, not an objfile.
7038 (symbol_set_names): Update.
7039 * symtab.h (symbol_set_demangled_name): Update.
7041 2013-04-08 Tom Tromey <tromey@redhat.com>
7043 * coffread.c (process_coff_symbol, coff_read_enum_type): Call
7045 * dwarf2read.c (fixup_go_packaging): Call allocate_symbol.
7046 (read_func_scope): Call allocate_template_symbol.
7047 (new_symbol_full): Call allocate_symbol.
7048 * jit.c (finalize_symtab): Call allocate_symbol.
7049 * jv-lang.c (add_class_symbol): Call allocate_symbol.
7050 * mdebugread.c (parse_symbol, new_block): Call allocate_symbol.
7051 * stabsread.c (patch_block_stabs, define_symbol, read_enum_type)
7052 (common_block_end): Call allocate_symbol.
7053 * symtab.c (allocate_symbol, initialize_symbol)
7054 (allocate_template_symbol): New functions.
7055 * symtab.c (allocate_symbol, initialize_symbol)
7056 (allocate_template_symbol): Declare.
7057 * xcoffread.c (process_xcoff_symbol): Call initialize_symbol.
7059 2013-04-08 Pedro Alves <palves@redhat.com>
7060 Keith Seitz <keiths@redhat.com>
7062 * breakpoint.c (create_breakpoint): Rename
7063 "parse_condition_and_thread" parameter to "parse_arg". Update
7064 describing comment. If !PARSE_ARG, then error out if ARG is not
7065 the empty string after extracting the location.
7066 * breakpoint.h (create_breakpoint): Rename
7067 "parse_condition_and_thread" parameter to "parse_arg".
7069 2013-04-08 Aleksandar Ristovski <aristovski@qnx.com
7071 * solib-svr4.c (lm_addr_check): Add const qualifier to 'so' arg.
7073 2013-04-07 Yao Qi <yao@codesourcery.com>
7075 * remote.c (remote_trace_find): Change type of parameters 'addr1'
7076 and 'addr2' to CORE_ADDR.
7077 * target.c (update_current_target): Update.
7078 * target.h (struct target_ops) <to_trace_find>: Change parameter
7080 * tracepoint.c (tfind_1): Change type of parameters 'addr1' and
7081 'addr2' to CORE_ADDR.
7082 (tfile_trace_find): Likewise.
7083 (tfile_get_traceframe_address): Change return type to CORE_ADDR.
7084 Change local variable 'addr' to type CORE_ADDR.
7085 * tracepoint.h (tfind_1): Update declaration.
7087 2013-04-06 Eli Zaretskii <eliz@gnu.org>
7089 * windows-nat.c (windows_get_absolute_argv0): Move from here...
7090 * mingw-hdep.c (windows_get_absolute_argv0): ...to here.
7093 * windows-nat.h (windows_get_absolute_argv0): Move prototype from
7095 * main.h (windows_get_absolute_argv0): ...to here.
7097 2013-04-05 Doug Evans <dje@google.com>
7099 * dwarf2read.c (struct dwarf2_per_objfile): Tweak comment.
7100 (read_cutu_die_from_dwo): Add comments.
7101 (read_structure_type): Update comment.
7102 (read_enumeration_type, read_namespace_type): Update comment.
7103 (read_die_type, get_die_type_at_offset, get_die_type): Update comment.
7105 2013-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
7107 Convert man pages to texinfo, new gdbinit.5 texinfo page.
7108 * Makefile.in (gdb.z): Remove.
7109 (install-only): Remove $(man1dir) and gdb.1 installation.
7112 2013-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
7114 Fix compatibility with Linux kernel 3.8.3.
7115 * linux-tdep.c (linux_find_memory_regions_full): Move variable number
7116 to more inner block. Remove parsing of NUMBER from outer block.
7117 Parse NUMBER only if KEYWORD has been identified.
7119 2013-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
7121 Fix variable name shadowing.
7122 * linux-tdep.c (linux_find_memory_regions_full): Rename outer variable
7123 filename to mapsfilename and update its uses.
7125 2013-04-05 Eli Zaretskii <eliz@gnu.org>
7127 * Makefile.in (TAGS): Avoid warning from etags when $GDB_NM_FILE is
7128 empty. See http://sourceware.org/ml/gdb-patches/2012-08/msg00504.html
7129 and http://sourceware.org/ml/gdb-patches/2013-04/msg00055.html for
7130 details of the problem.
7132 2013-04-04 Pedro Alves <palves@redhat.com>
7133 Hui Zhu <hui@codesourcery.com>
7135 * breakpoint.c (validate_commands_for_breakpoint): If validating a
7136 tracepoint, reset its STEP_COUNT and call validate_actionline.
7138 2013-04-03 Doug Evans <dje@google.com>
7140 * dwarf2read.c (read_die_and_siblings_1): Renamed from
7141 read_die_and_siblings.
7142 (read_die_and_siblings): New function.
7143 (read_cutu_die_from_dwo): Dump die if requested.
7144 (read_die_and_children): Call read_full_die_1 and
7145 read_die_and_siblings_1.
7146 (read_full_die): Dump die if requested.
7148 * dwarf2read.c (read_comp_units_from_section): Add debugging printf.
7150 * dwarf2read.c (struct dwo_file): New member comp_dir.
7151 Rename member name to dwo_name. All uses updated.
7152 (hash_dwo_file): Include comp_dir in computation.
7153 (eq_dwo_file): Ditto.
7154 (lookup_dwo_file_slot): New arg comp_dir. All callers updated.
7155 (create_dwo_in_dwp, lookup_dwo_in_dwp, open_and_init_dwo_file): Ditto.
7157 * psymtab.c (read_psymtabs_with_fullname): Don't call
7158 psymtab_to_fullname if the basenames are different.
7160 2013-04-03 Jan Kratochvil <jan.kratochvil@redhat.com>
7162 * NEWS (Changes in GDB 7.6): Update the data-disassemble for "fullname".
7163 New entry about "fullname" presence.
7165 2013-04-03 Pedro Alves <palves@redhat.com>
7167 * NEWS: Mention x86_64/Cygwin as new native configuration.
7169 2013-04-02 Doug Evans <dje@google.com>
7171 * dwarf2read.c (read_structure_type): Fix typo in comment.
7173 2013-04-02 Pedro Alves <palves@redhat.com>
7175 * NEWS: Mention "set/show debug aarch64", "set/show debug
7176 coff-pe-read" and "set/show debug mach-o".
7178 2013-04-02 Pedro Alves <palves@redhat.com>
7180 * NEWS: Mention "set/show remote trace-buffer-size-packet".
7182 2013-04-02 Eli Zaretskii <eliz@gnu.org>
7184 * Makefile.in (HFILES_NO_SRCDIR): Remove call-cmds.h.
7185 gdb_string.h is now in common/.
7187 2013-04-02 Pedro Alves <palves@redhat.com>
7189 * NEWS: Move "set debug notification" and "set trace-buffer-size"
7190 under "New options".
7192 2013-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
7196 * remote.c (remote_get_trace_status): Include putpkt in TRY_CATCH.
7198 2013-04-02 Pedro Alves <palves@redhat.com>
7202 * remote.c (send_interrupt_sequence): Use remote_serial_write.
7203 (remote_serial_write): New function.
7204 (putpkt_binary, getpkt_or_notif_sane_1): Use remote_serial_write.
7206 2013-04-01 Jiong Wang <jiwang@tilera.com>
7208 * NEWS: Mention TILE-Gx in "New native configurations" and
7209 "New targets" sections.
7211 2013-04-01 Doug Evans <dje@google.com>
7213 * dwarf2read.c (lookup_signatured_type_at_offset): Delete.
7214 (process_enumeration_scope): Simplify.
7216 * dwarf2read.c (struct dwarf2_per_cu_data): Move member
7218 (struct signatured_type): ... to here.
7219 (sig_type_ptr): New typedef.
7220 (type_unit_group): Delete member 't.first_cu'. Move member 'tus'
7221 out of union 't'. All uses updated.
7222 (dw2_get_file_names_reader): Assert not called for a type unit.
7223 (dw2_get_file_names): Assert not called for a type unit or type
7225 (build_type_psymtabs_reader): Assert called for a type unit.
7226 (build_type_psymtab_dependencies): Assert called for a type unit group.
7228 * dwarf2read.c (free_dwo_file): Add comment.
7229 (dwarf2_per_objfile_free): Unref dwp bfd.
7231 2013-04-01 Aleksandar Ristovski <aristovski@qnx.com>
7233 * coff-pe-read.c (add_pe_exported_sym): Remove unused 'dll_name_len'.
7234 (add_pe_forwarded_sym): Remove unused 'section', 'dll_name_len'.
7235 (read_pe_exported_syms): Remove unused 'exportix'.
7236 (pe_text_section_offset): Remove unused 'opthdr_ofs', 'num_entries',
7237 'export_rva', 'export_size', 'expptr', 'exp_funcbase', 'expdata',
7238 'erva', 'name_rvas', 'ordinals', 'nexp', 'ordbase', 'dll_name'.
7240 2013-04-01 Aleksandar Ristovski <aristovski@qnx.com>
7242 * breakpoint.c (parse_cond_to_aexpr): Remove unused 'old_chain'.
7243 (print_it_watchpoint): Remove unused 'bl'.
7244 (say_where): Remove unused 'uiout'.
7245 (bpstat_remove_breakpoint_callback): Remove unused 'uiout'.
7246 (bkpt_breakpoint_hit): Remove unused 'b'.
7247 (internal_bkpt_print_it): Remove unused 'uiout'.
7248 * buildsym.c (augment_type_symtab): Remove unused 'i'.
7250 2013-03-31 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
7252 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_float): New function.
7253 (ppc64_sysv_abi_push_dummy_call): Handle complex arguments.
7255 2013-03-29 Doug Evans <dje@google.com>
7257 * dwarf2read.c (open_dwo_file): Renamed from open_dwop_file.
7258 Delete arg is_dwp. All callers updated.
7259 (open_dwp_file): New function.
7260 (open_and_init_dwp_file): Call it.
7261 (get_dwp_file): New function.
7262 (lookup_dwo_cutu): Call it.
7264 * dwarf2read.c (open_and_init_dwp_file): Remove incorrect, and
7265 unnecessary, cleanup.
7267 * dwarf2read.c (lookup_dwo_cutu): Improve complaint text.
7269 * dwarf2read.c (read_cutu_die_from_dwo): New function.
7270 (lookup_dwo_unit): New function.
7271 (init_cutu_and_read_dies): Move DWO handling to new functions.
7273 * dwarf2read.c (struct signatured_type): Tweak comment.
7274 (struct dwo_unit): Tweak comment.
7275 (create_debug_types_hash_table): Tweak comment. Reformat long line.
7276 (create_dwo_debug_info_hash_table): Tweak comment.
7277 (dwarf2_per_cu_offset_and_type): Tweak comment.
7279 * dwarf2read.c (lookup_signatured_type): Remove complaint about
7280 missing .debug_types section.
7282 2013-03-29 Yao Qi <yao@codesourcery.com>
7284 * corelow.c: Include "completer.h".
7285 (_initialize_corelow): Call add_target_with_completer with
7286 argument 'filename_completer'.
7287 * tracepoint.c: Likewise.
7288 * exec.c (_initialize_exec): Likewise.
7289 * target.c (add_target): Rename to ...
7290 (add_target_with_completer): ... this. Call set_cmd_completer
7291 if parameter completer is not NULL.
7293 * target.h: Include "command.h".
7294 (add_target_with_completer): Declare it.
7296 2013-03-28 Joel Brobecker <brobecker@adacore.com>
7298 * coffread.c (is_import_fixup_symbol): New function.
7299 (record_minimal_symbol): Use is_import_fixup_symbol to
7300 detect import fixup symbols, and discard them.
7302 2013-03-28 Doug Evans <dje@google.com>
7304 * dwarf2read.c (create_debug_types_hash_table): Don't allocate the
7305 types hash table until we know we need it.
7307 * dwarf2read.c (create_addrmap_from_index): Complain about bad CU
7310 * dwarf2read.c (dw2_get_file_names): Delete arg "objfile".
7311 All callers updated.
7312 (dw2_print_stats): Print #read CUs too.
7313 (dump_die_shallow): Print signatured types better.
7315 * dwarf2read.c (struct dwarf2_per_cu_data): Rename member
7316 info_or_types_section to section. All uses updated.
7317 (struct dwo_unit): Ditto.
7319 2013-03-28 Pedro Alves <palves@redhat.com>
7321 * NEWS (New options): New section.
7322 (New options): Mention set/show remote trace-status-packet.
7323 * remote.c (PACKET_qTStatus): New enumeration value.
7324 (remote_get_trace_status): Skip sending qTStatus if the packet is
7325 disabled. Use packet_ok.
7326 (_initialize_remote): Register a configuration command for
7329 2013-03-28 Doug Evans <dje@google.com>
7331 * symfile.c (find_separate_debug_file): Add comment.
7332 (terminate_after_last_dir_separator): Tweak comment.
7334 * dwarf2read.c (create_partial_symtab): Add forward decl.
7335 (create_partial_symtab): Move to be closer to other psymtab functions.
7336 (process_psymtab_comp_unit_reader, process_psymtab_comp_unit): Ditto.
7338 * dwarf2read.c (dwarf2_physname): Move declaration to better spot.
7339 (compute_symtab_includes): Remove unnecessary forward declaration.
7340 (die_needs_namespace): Add comment marking group of functions for
7341 dwarf2 name computation.
7343 * typeprint.c (_initialize_typeprint): Improve type help text.
7345 * python/python.c (finish_python_initialization): Provide suggestion
7346 for how to tell gdb to find its python files.
7348 2013-03-28 Pedro Alves <palves@redhat.com>
7352 * source.c (_initialize_source): Change back "set listsize" to an
7355 2013-03-27 Gareth McMullin <gareth@blacksphere.co.nz>
7358 * remote.c (remote_get_trace_status): Include putpkt in TRY_CATCH.
7360 2013-03-27 Pedro Alves <palves@redhat.com>
7362 * top.c (history_size): Rename to ...
7363 (history_size_setshow_var): ... this. Add comment.
7364 (show_commands): Use readline's 'history_length' instead of
7365 computing the history length by calling history_get in a loop.
7366 (set_history_size_command): Error out for sizes over INT_MAX.
7367 Restore previous history size on invalid size.
7368 (init_history): If HISTSIZE is negative, leave the history size as
7370 (init_main): Adjust.
7372 2013-03-27 Pedro Alves <palves@redhat.com>
7374 * coff-pe-read.c (_initialize_coff_pe_read): Rename "set debug
7375 coff_pe_read" command to "set debug coff-pe-read".
7377 2013-03-27 Markus Metzger <markus.t.metzger@intel.com>
7379 * record.c (command_size_to_target_size): Fix size comparison.
7380 Change parameter type from pointer to integer to integer.
7383 2013-03-27 Pierre Muller <muller@sourceware.org>
7385 * windows-nat.c (handle_output_debug_string): Avoid typecast
7386 from integer of different size warning.
7388 2013-03-26 Joel Brobecker <brobecker@adacore.com>
7390 * windows-nat.c (handle_output_debug_string): Add empty line
7391 after local block variable definition.
7393 2013-03-26 Pedro Alves <palves@redhat.com>
7395 * ser-tcp.c (wait_for_connect): Make 'polls' parameter unsigned.
7396 (net_open): Make 'polls' local unsigned.
7398 2013-03-26 Pedro Alves <palves@redhat.com>
7400 * remote.c (_initialize_remote): Make "set remoteaddresssize"
7401 a zuinteger command instead of uinteger.
7403 2013-03-26 Pedro Alves <palves@redhat.com>
7405 * record-full.c (record_full_insn_num): Make it unsigned.
7406 (record_full_check_insn_num, record_full_message)
7407 (record_full_registers_change, record_full_xfer_partial): Remove
7408 record_full_insn_max_num check (it's always != 0).
7409 (record_full_info, record_full_restore): Use %u as format string.
7410 (): Use %u as format string.
7411 (set_record_full_insn_max_num): Remove record_full_insn_max_num
7412 check (it's always != 0).
7414 2013-03-26 Pedro Alves <palves@redhat.com>
7416 * dcache.c (_initialize_dcache): Make the "set dcache line-size"
7417 and "set dcache size" commands zuinteger instead of uinteger.
7419 2013-03-26 Pedro Alves <palves@redhat.com>
7421 * cris-tdep.c (_initialize_cris_tdep): Make the "set cris-version"
7422 command zuinteger instead of uinteger.
7424 2013-03-26 Pedro Alves <palves@redhat.com>
7426 * coff-pe-read.c (_initialize_coff_pe_read): Make the command
7427 zuinteger instead of uinteger.
7429 2013-03-26 Pedro Alves <palves@redhat.com>
7431 * record.c (record_insn_history_size_setshow_var)
7432 (record_call_history_size_setshow_var): New globals.
7433 (command_size_to_target_size): New function.
7434 (cmd_record_insn_history, cmd_record_call_history): Use
7435 command_size_to_target_size instead of cast.
7436 (validate_history_size, set_record_insn_history_size)
7437 (set_record_call_history_size): New functions.
7438 (_initialize_record): Install set_record_insn_history_size and
7439 set_record_call_history_size as "set" hooks of "set record
7440 instruction-history-size" and "set record
7441 function-call-history-size".
7443 2013-03-26 Pedro Alves <palves@redhat.com>
7445 * top.c (gdb_rl_operate_and_get_next): Replace max_input_history
7446 use with history_max_entries use. Remove FIXME note.
7448 2013-03-26 Markus Metzger <markus.t.metzger@intel.com>
7450 * record-btrace.c (record_btrace_close): Call
7451 record_btrace_auto_disable.
7453 2013-03-25 Joel Brobecker <brobecker@adacore.com>
7455 * rs6000-nat.c (fixup_breakpoints): Delete declaration.
7457 2013-03-25 Doug Evans <dje@google.com>
7459 * contrib/cc-with-tweaks.sh: Check exit code of dwp.
7461 2013-03-25 Tom Tromey <tromey@redhat.com>
7464 * c-exp.y (exp): Add new productions for destructors after '.' and
7466 (write_destructor_name): New function.
7468 2013-03-25 Tom Tromey <tromey@redhat.com>
7471 * opencl-lang.c (evaluate_subexp_opencl) <STRUCTOP_STRUCT>: Use
7472 value_struct_elt, not lookup_struct_elt_type.
7473 * eval.c (evaluate_subexp_standard) <STRUCTOP_STRUCT,
7474 STRUCTOP_PTR>: Use value_struct_elt, not lookup_struct_elt_type.
7475 * expression.h (EVAL_AVOID_SIDE_EFFECTS): Update comment.
7477 2013-03-25 Yao Qi <yao@codesourcery.com>
7479 * ctf.c [USE_WIN32API]: Undef 'mkdir' and use 'mkdir'
7480 instead of '_mkdir'.
7482 2013-03-23 Eli Zaretskii <eliz@gnu.org>
7484 * windows-nat.c (windows_get_absolute_argv0): New function.
7485 * windows-nat.h: Add its prototype.
7487 * main.c (get_init_files): Use filename_ncmp instead of strncmp.
7488 Use IS_DIR_SEPARATOR instead of looking for a character inside
7489 SLASH_STRING. Include filenames.h.
7490 (captured_main) [__MINGW32__]: Make argv[0] absolute, so that
7491 relocate_gdb_directory works when passed gdb_program_name.
7492 Include windows-nat.h.
7494 2013-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
7496 * exceptions.h (enum errors): New entry TARGET_CLOSE_ERROR.
7497 * remote.c (trace_error): Remove the special handling of '2'.
7498 (readchar) <SERIAL_EOF>
7499 (readchar) <SERIAL_ERROR>
7500 (getpkt_or_notif_sane_1): Use TARGET_CLOSE_ERROR for them.
7501 (remote_get_trace_status): Call throw_exception if EX is
7503 * utils.c (perror_with_name): Rename to ...
7504 (throw_perror_with_name): ... here. New parameter errcode, describe it
7505 in the function comment.
7506 (perror_with_name): New function wrapper.
7507 * utils.h (enum errors): New stub declaration.
7508 (throw_perror_with_name): New declaration.
7510 2013-03-22 Pedro Alves <palves@redhat.com>
7511 Yao Qi <yao@codesourcery.com>
7512 Mark Kettenis <kettenis@gnu.org>
7514 * cli/cli-setshow.c (do_set_command) <var_uinteger>:
7515 Don't let the user set the value to UINT_MAX directly.
7516 <var_integer>: Don't let the user set the value to INT_MAX
7519 2013-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
7521 * remote.c (remote_unpush_target): New function.
7522 (remote_open_1): Remove two pop_target calls, update one comment, add
7523 comment to target_preopen call. Replace pop_target call by
7524 remote_unpush_target call.
7525 (interrupt_query, readchar, getpkt_or_notif_sane_1): Replace
7526 pop_target calls by remote_unpush_target calls.
7528 2013-03-22 Pedro Alves <palves@redhat.com>
7530 * linux-nat.c (linux_child_follow_fork): Don't call
7531 linux_enable_event_reporting.
7532 (linux_handle_extended_wait): Don't call
7533 linux_enable_event_reporting.
7535 2013-03-22 Pedro Alves <palves@redhat.com>
7537 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Define INSN macro,
7538 use it to rewrite the trampoline buffers with type gdb_byte[], and
7539 undefine the macro. Remove char* cast.
7541 2013-03-21 Doug Evans <dje@google.com>
7543 New commands "mt set per-command {space,time,symtab} {on,off}".
7545 * event-top.c: #include "maint.h".
7546 * main.c: #include "maint.h".
7547 * maint.c: #include <sys/time.h>, <time.h>, block.h, top.h,
7548 timeval-utils.h, maint.h, cli/cli-setshow.h.
7549 (per_command_time, per_command_space): New static globals.
7550 (per_command_symtab): New static global.
7551 (per_command_setlist, per_command_showlist): New static globals.
7552 (struct cmd_stats): Move here from utils.c.
7553 (set_per_command_time): Renamed from set_display_time in utils.c
7554 and moved here. All callers updated.
7555 (set_per_command_space): Renamed from set_display_space in utils.c
7556 and moved here. All callers updated.
7557 (count_symtabs_and_blocks): New function.
7558 (report_command_stats): Moved here from utils.c. Add support for
7559 printing symtab stats. Only print data if enabled before command
7561 (make_command_stats_cleanup): Ditto.
7562 (sert_per_command_cmd, show_per_command_cmd): New functions.
7563 (_initialize_maint_cmds): Add new commands
7564 mt set per-command {space,time,symtab} {on,off}.
7565 * maint.h: New file.
7566 * top.c: #include "maint.h".
7567 * utils.c (reset_prompt_for_continue_wait_time): New function.
7568 (get_prompt_for_continue_wait_time): New function.
7569 * utils.h (reset_prompt_for_continue_wait_time): Declare
7570 (get_prompt_for_continue_wait_time): Declare.
7571 (make_command_stats_cleanup): Moved to maint.h.
7572 (set_display_time, set_display_space): Moved to maint.h and renamed
7573 to set_per_command_time, set_per_command_space.
7574 * cli/cli-setshow.c (parse_cli_boolean_value): Renamed from
7575 parse_binary_operation and made non-static. Don't call error,
7576 just return an error marker. All callers updated.
7577 * cli/cli-setshow.h (parse_cli_boolean_value): Declare.
7579 2013-03-21 Tom Tromey <tromey@redhat.com>
7581 * symfile.c (alloc_section_addr_info): Update header. Don't set
7582 'num_sections' field.
7583 (build_section_addr_info_from_section_table): Set 'num_sections'.
7584 (build_section_addr_info_from_bfd): Likewise.
7585 (build_section_addr_info_from_objfile): Remove dead loop
7587 (free_section_addr_info): Unconditionally call xfree.
7588 (relative_addr_info_to_section_offsets, addrs_section_sort)
7589 (addr_info_make_relative, syms_from_objfile_1): Remove dead loop
7591 (syms_from_objfile_1): Remove dead 'if' condition. Check
7593 (add_symbol_file_command): Set 'num_sections'.
7594 * symfile-mem.c (symbol_file_add_from_memory): Set
7596 * somread.c (som_symfile_offsets): Remove dead loop condition.
7597 * machoread.c (macho_symfile_offsets): Remove dead 'if'.
7598 * jit.c (jit_bfd_try_read_symtab): Set 'num_sections'.
7600 2013-03-21 Tom Tromey <tromey@redhat.com>
7602 * tracepoint.h (decode_agent_options): Add 'trace_string'
7604 * tracepoint.c (decode_agent_options): Add 'trace_string'
7606 (validate_actionline): Update.
7607 (collect_symbol): Add 'trace_string' argument.
7608 (struct add_local_symbols_data) <trace_string>: New field.
7609 (do_collect_symbol): Update.
7610 (add_local_symbols): Add 'trace_string' argument.
7611 (encode_actions_1): Update.
7612 (trace_dump_actions): Update.
7613 * dwarf2loc.c (access_memory): Update.
7614 * ax.h (struct agent_expr) <tracing, trace_string>: New fields.
7615 * ax-general.c (new_agent_expr): Update.
7616 * ax-gdb.h (gen_trace_for_expr, gen_trace_for_var)
7617 (gen_trace_for_return_address): Add argument.
7618 (trace_kludge, trace_string_kludge): Remove.
7619 * ax-gdb.c (trace_kludge, trace_string_kludge): Remove.
7620 (gen_traced_pop, gen_fetch, gen_bitfield_ref, gen_expr): Update.
7621 (gen_trace_for_var): Add 'trace_string' argument.
7622 (gen_trace_for_expr, gen_trace_for_return_address): Likewise.
7623 (gen_printf, agent_eval_command_one): Update.
7625 2013-03-21 Tom Tromey <tromey@redhat.com>
7628 * c-exp.y (yylex): Rewrite to push all tokens onto the FIFO.
7629 Handle FILENAME token.
7631 2013-03-21 Tom Tromey <tromey@redhat.com>
7633 * c-exp.y (YYPRINT): Define.
7634 (c_print_token): New function.
7636 2013-03-21 Tom Tromey <tromey@redhat.com>
7638 * c-exp.y (%union) <sym, ivar, ivec>: Remove.
7640 2013-03-21 Yao Qi <yao@codesourcery.com>
7642 * ctf.c: Include "gdb_stat.h".
7643 [USE_WIN32API]: New macro 'mkdir'.
7644 (ctf_start): Use permission bits macros if they are defined.
7646 2013-03-20 Keith Seitz <keiths@redhat.com>
7648 * breakpoint.h (struct breakpoint): Add comment to
7649 extra_string indicating that this member is mallod'd.
7650 * breakpoint.c (base_breakpoint_dtor): Free extra_string.
7652 2013-03-20 Pedro Alves <palves@redhat.com>
7656 * cli/cli-setshow.c (do_set_command)
7657 <var_uinteger, var_zuinteger>: Use LONGEST for variable holding
7658 the result of parsing the command argument. Throw error if the
7659 value is greater than UINT_MAX. Print the invalid value with
7661 <var_integer, var_zinteger>: Use LONGEST for variable holding the
7662 result of parsing the command argument. Throw error if the value
7663 is greater than INT_MAX, not greater or equal. Also throw error
7664 if the value is less than INT_MIN. Print the invalid value with
7666 <var_zuinteger_unlimited>: Throw error if the value is greater
7667 than INT_MAX, not greater or equal.
7668 (do_show_command) <var_integer, var_zinteger,
7669 var_zuinteger_unlimited>: Use %d for printing int, not %u.
7671 2013-03-20 Tom Tromey <tromey@redhat.com>
7673 * ax-gdb.c (gen_var_ref): Unconditionally call via computed ops,
7675 * dwarf2read.c (read_func_scope): Remove old FIXME.
7676 * eval.c (evaluate_subexp_standard): Check SYMBOL_COMPUTED_OPS,
7678 * findvar.c (symbol_read_needs_frame, default_read_var_value):
7679 Unconditionally call via computed ops, if possible.
7680 * printcmd.c (address_info): Unconditionally call via computed ops,
7682 * stack.c (read_frame_arg): Unconditionally call via computed ops,
7684 * symtab.c (register_symbol_computed_impl): Sanity check 'ops'.
7685 * tracepoint.c (scope_info): Unconditionally call via computed ops,
7688 2013-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
7689 Tom Tromey <tromey@redhat.com>
7692 * coffread.c (coff_register_index): New global.
7693 (process_coff_symbol, coff_read_enum_type): Set
7694 SYMBOL_ACLASS_INDEX.
7695 (_initialize_coffread): Initialize new global.
7696 * dwarf2loc.c (locexpr_find_frame_base_location)
7697 (dwarf2_block_frame_base_locexpr_funcs)
7698 (loclist_find_frame_base_location)
7699 (dwarf2_block_frame_base_loclist_funcs): New.
7700 (dwarf_expr_frame_base_1): Call SYMBOL_BLOCK_OPS, remove internal_error.
7701 (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Add location_has_loclist.
7702 * dwarf2loc.h (dwarf2_block_frame_base_locexpr_funcs)
7703 (dwarf2_block_frame_base_loclist_funcs): New.
7704 * dwarf2read.c (dwarf2_locexpr_index, dwarf2_loclist_index)
7705 (dwarf2_locexpr_block_index, dwarf2_loclist_block_index): New
7707 (read_func_scope): Update.
7708 (fixup_go_packaging, mark_common_block_symbol_computed)
7709 (var_decode_location, new_symbol_full, dwarf2_const_value):
7710 Set SYMBOL_ACLASS_INDEX.
7711 (dwarf2_symbol_mark_computed): Likewise. Add 'is_block' argument.
7712 (_initialize_dwarf2_read): Initialize new globals.
7713 * jit.c (finalize_symtab): Set SYMBOL_ACLASS_INDEX.
7714 * jv-lang.c (add_class_symbol): Set SYMBOL_ACLASS_INDEX.
7715 * mdebugread.c (mdebug_register_index, mdebug_regparm_index): New
7717 (parse_symbol, psymtab_to_symtab_1): Set SYMBOL_ACLASS_INDEX.
7718 (_initialize_mdebugread): Initialize new globals.
7719 * psympriv.h (struct partial_symbol) <aclass>: Update comment.
7720 * stabsread.c (patch_block_stabs): Set SYMBOL_ACLASS_INDEX.
7721 (stab_register_index, stab_regparm_index): New globals.
7722 (define_symbol, read_enum_type, common_block_end): Set
7723 SYMBOL_ACLASS_INDEX.
7724 (_initialize_stabsread): Initialize new globals.
7725 * symtab.c (next_aclass_value, symbol_impl, symbol_impls): New
7727 (MAX_SYMBOL_IMPLS): New define.
7728 (register_symbol_computed_impl, register_symbol_block_impl)
7729 (register_symbol_register_impl)
7730 (initialize_ordinary_address_classes): New functions.
7731 (_initialize_symtab): Call initialize_ordinary_address_classes.
7732 * symtab.h (enum address_class) <LOC_FINAL_VALUE>: New constant.
7733 (struct symbol_impl): New.
7734 (SYMBOL_ACLASS_BITS): New define.
7735 (struct symbol) <aclass, ops>: Remove fields.
7736 <aclass_index>: New field.
7737 (symbol_impls): Declare.
7738 (SYMBOL_CLASS, SYMBOL_COMPUTED_OPS, SYMBOL_REGISTER_OPS): Redefine.
7739 (SYMBOL_IMPL, SYMBOL_ACLASS_INDEX): New defines.
7740 (register_symbol_computed_impl, register_symbol_block_impl)
7741 (register_symbol_register_impl): Declare.
7742 (struct symbol_computed_ops): Add location_has_loclist.
7743 (struct symbol_block_ops): New.
7744 (SYMBOL_BLOCK_OPS): New.
7745 * xcoffread.c (process_xcoff_symbol): Set SYMBOL_ACLASS_INDEX.
7747 2013-03-20 Tom Tromey <tromey@redhat.com>
7749 * psymtab.c (find_pc_sect_psymbol, fixup_psymbol_section)
7750 (print_partial_symbols, recursively_search_psymtabs): Use
7753 2013-03-20 Pierre Muller <muller@sourceware.org>
7755 * contrib/ari/gdb_ari.sh (OP eol rule): Also check
7756 addtion, subtraction, multiplication and division binary operator.
7758 2013-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
7761 * bfd-target.c (target_bfd_xclose): Remove parameter quitting.
7762 * bsd-kvm.c (bsd_kvm_close): Likewise.
7763 * bsd-uthread.c (bsd_uthread_close): Likewise.
7764 * corelow.c (core_close): Likewise.
7765 (core_close_cleanup): Remove parameter quitting from a caller.
7766 * event-top.c (async_disconnect): Likewise.
7767 * exec.c (exec_close_1): Remove parameter quitting.
7768 * go32-nat.c (go32_close): Likewise.
7769 * linux-nat.c (linux_nat_close): Remove parameter quitting. Remove
7770 parameter quitting from a caller.
7771 * mips-linux-nat.c (super_close): Remove parameter quitting from the
7773 (mips_linux_close): Remove parameter quitting. Remove parameter
7774 quitting from a caller.
7775 * monitor.c (monitor_close): Remove parameter quitting.
7776 * monitor.h (monitor_close): Likewise.
7777 * record-btrace.c (record_btrace_close): Likewise.
7778 * record-full.c (record_full_close): Likewise.
7779 * remote-m32r-sdi.c (m32r_close): Remove parameter quitting and remove
7780 it also from fprintf_unfiltered.
7781 * remote-mips.c (mips_close): Remove parameter quitting.
7782 (mips_detach): Remove parameter quitting from a caller.
7783 * remote-sim.c (gdbsim_close): Remove parameter quitting.
7784 (gdbsim_close): Remove duplicate function comment. Remove parameter
7785 quitting and remove it also from printf_filtered.
7786 * remote.c (remote_close): Remove parameter quitting.
7787 * solib-svr4.c (enable_break): Remove parameter quitting from a caller.
7788 * target.c (update_current_target): Remove parameter int from to_close
7790 (push_target, unpush_target, pop_target): Remove parameter quitting from
7792 (pop_all_targets_above, pop_all_targets): Remove parameter quitting.
7793 Remove parameter quitting from a caller.
7794 (target_preopen): Remove parameter quitting from a caller.
7795 (target_close): Remove parameter quitting. Remove parameter quitting
7796 from a caller two times. Remove parameter quitting also from
7798 * target.h (struct target_ops): Remove parameter quitting and as int
7799 from fields to_xclose and to_close.
7800 (extern struct target_ops current_target):
7801 (target_close, pop_all_targets): Remove parameter quitting. Update the
7803 (pop_all_targets_above): Remove parameter quitting.
7804 * top.c (quit_target): Remove parameter quitting from a caller.
7805 * tracepoint.c (tfile_close): Remove parameter quitting.
7806 * windows-nat.c (windows_close): Remove parameter quitting.
7808 2013-03-20 Corinna Vinschen <vinschen@redhat.com>
7810 * windows-nat.c (handle_output_debug_string): Replace call
7811 to string_to_core_addr with call to strtoull.
7813 2013-03-20 Yao Qi <yao@codesourcery.com>
7815 * ctf.c (ctf_save_metadata_header): Define macro HOST_ENDIANNESS
7816 and write it to CTF metadata.
7818 2013-03-19 Corinna Vinschen <vinschen@redhat.com>
7820 * windows-nat.c (handle_output_debug_string): Change type of n to
7821 SIZE_T to avoid crash on 64 bit systems.
7823 2013-03-17 Eli Zaretskii <eliz@gnu.org>
7825 * python/python-internal.h (HAVE_SNPRINTF)
7826 [_WIN32 && HAVE_DECL_SNPRINTF]: Define, to avoid compiler warnings
7827 about redefinition of snprintf by pyerrors.h.
7829 2013-03-15 Steve Ellcey <sellcey@mips.com>
7831 * remote-sim.c (sim_command_completer): Make char arguments const.
7833 2013-03-15 Tom Tromey <tromey@redhat.com>
7836 * gdbtypes.c (types_equal): Handle TYPE_CODE_FUNC.
7838 2013-03-14 Tom Tromey <tromey@redhat.com>
7840 * gdb_bfd.c (struct gdb_bfd_data) <crc_computed, crc>:
7842 (get_file_crc): Move from symfile.c.
7843 (gdb_bfd_crc): New function.
7844 * gdb_bfd.h (gdb_bfd_crc): Declare.
7845 * objfiles.h (struct objfile) <crc32, crc32_p>: Remove.
7846 * symfile.c (get_file_crc): Move to gdb_bfd.c.
7847 (separate_debug_file_exists): Use gdb_bfd_crc.
7849 2013-03-14 Tom Tromey <tromey@redhat.com>
7851 * symfile.c (get_debug_link_info): Remove.
7852 (find_separate_debug_file_by_debuglink): Use
7853 bfd_get_debug_link_info.
7855 2013-03-14 Tom Tromey <tromey@redhat.com>
7857 * symtab.c (error_in_psymtab_expansion): New function.
7858 (lookup_symbol_aux_quick)
7859 (basic_lookup_transparent_type_quick): Remove "last resort"
7860 code. Use error_in_psymtab_expansion.
7862 2013-03-14 Doug Evans <dje@google.com>
7863 Jan Kratochvil <jan.kratochvil@redhat.com>
7865 * dwarf2read.c (dw2_map_symtabs_matching_filename): Put continue after
7866 any successful compare_filenames_for_search or FILENAME_CMP.
7867 * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
7868 * symtab.c (iterate_over_some_symtabs): Likewise.
7870 2013-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
7872 * source.c (print_source_lines_base): Make a local copy of
7875 2013-03-14 Hui Zhu <hui_zhu@mentor.com>
7876 Jan Kratochvil <jan.kratochvil@redhat.com>
7878 * source.c (print_source_lines_base): Suppress "file" for TUI.
7880 2013-03-14 Keith Seitz <keiths@redhat.com>
7881 Alan Matsuoka <alanm@redhat.com>
7885 * cp-namespace.c (cp_lookup_nested_symbol): Handle TYPE_CODE_FUNC and
7887 * elfread.c (elf_symtab_read): Handle BSF_GNU_UNIQUE for certain
7890 2013-03-14 Yao Qi <yao@codesourcery.com>
7892 * tracepoint.c (tfile_write_status): Write 'stop_desc' of trace
7893 status to tfile if trace is stopped by command 'tstop'.
7895 2013-03-14 Yao Qi <yao@codesourcery.com>
7897 * tracepoint.c (tfile_write_status): Write trace notes and user
7898 name into tfile if they are not NULL.
7900 2013-03-14 Hui Zhu <hui@codesourcery.com>
7901 Yao Qi <yao@codesourcery.com>
7903 * Makefile.in (REMOTE_OBS): Add ctf.o.
7904 (SFILES): Add ctf.c.
7905 (HFILES_NO_SRCDIR): Add ctf.h.
7906 * ctf.c, ctf.h: New files.
7907 * tracepoint.c: Include 'ctf.h'.
7908 (collect_pseudocommand): Remove static.
7909 (trace_save_command): Parse option "-ctf".
7910 Produce different trace file writers per option.
7911 Adjust output message.
7912 (trace_save_tfile, trace_save_ctf): New.
7913 * tracepoint.h (trace_save_tfile, trace_save_ctf): Declare.
7914 * mi/mi-main.c: Include 'ctf.h'.
7915 (mi_cmd_trace_save): Handle option '-ctf'. Call either
7916 trace_save_tfile or trace_save_ctf.
7917 * NEWS: Mention these changes.
7919 2013-03-14 Yao Qi <yao@codesourcery.com>
7921 * tracepoint.c (trace_file_writer_xfree): New.
7922 (struct tfile_writer_data): New.
7923 (tfile_dtor, tfile_can_target_save, tfile_start): New.
7924 (tfile_write_header, tfile_write_regblock_type): New.
7925 (tfile_write_status, tfile_write_uploaded_tsv): New.
7926 (tfile_write_uploaded_tp, tfile_write_definition_end): New.
7927 (tfile_write_raw_data, (tfile_end): New.
7928 (tfile_write_ops): New global variable.
7929 (TRACE_WRITE_R_BLOCK): New macro.
7930 (TRACE_WRITE_M_BLOCK_HEADER): New macro.
7931 (TRACE_WRITE_M_BLOCK_MEMORY): New macro.
7932 (TRACE_WRITE_V_BLOCK): New macro.
7933 (trace_save): Add extra one parameter WRITER. Make it static.
7934 Use WRITER to writer trace.
7935 (tfile_trace_file_writer_new): New.
7936 (trace_save_command): Caller update.
7937 (trace_save_tfile): Write trace data in TFILE format.
7938 * tracepoint.h (struct trace_frame_write_ops): New.
7939 (struct trace_file_write_ops): New.
7940 (struct trace_file_writer): New.
7941 (trace_save): Remove its declaration.
7942 (trace_save_tfile): Declare it.
7943 * mi/mi-main.c (mi_cmd_trace_save): Call trace_save_tfile
7944 instead of trace_save.
7946 2013-03-13 Pedro Alves <palves@redhat.com>
7948 * hppa-hpux-nat.c (hppa_hpux_save_state_offset): Make static.
7950 2013-03-13 Pedro Alves <palves@redhat.com>
7952 * dbxread.c (read_ofile_symtab, process_one_symbol): Remove
7954 * demangle.c (current_demangling_style_string): Make it const.
7955 (set_demangling_command): Assert the demangling style is known.
7956 Remove all handling of unknown styles. Set
7957 'current_demangling_style_string' to an element of the
7958 demangling_style_names array.
7959 (set_demangling_style): Delete.
7960 (_initialize_demangler): Set current_demangling_style_string to the
7961 element of the demangling_style_names array that corresponds to
7962 the default demangling style. Remove FIXME note. Don't call
7963 set_demangling_style.
7964 * gdb-demangle.h (set_demangling_style): Remove declaration.
7966 2013-03-13 Pedro Alves <palves@redhat.com>
7968 * ada-lang.c (struct add_partial_datum) <text, text0, word>: Make
7970 (ada_make_symbol_completion_list): Make "text0" parameter const.
7971 * ax-gdb.c (agent_eval_command_one): Make "exp" parameter const.
7972 * breakpoint.c (condition_completer): Make "text" and "word"
7973 parameters const. Adjust.
7974 (check_tracepoint_command): Adjust to validate_actionline
7976 (catch_syscall_completer): Make "text" and "word" parameters
7978 * cli/cli-cmds.c (show_user): Make "comname" local const.
7979 (valid_command_p): Make "command" parameter const.
7980 (alias_command): Make "alias_prefix" and "command_prefix" locals
7982 * cli/cli-decode.c (add_cmd): Make "name" parameter const.
7983 (add_alias_cmd): Make "name" and "oldname" parameters const.
7984 Adjust. No longer make copy of OLDNAME.
7985 (add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd)
7986 (add_setshow_cmd_full, add_setshow_enum_cmd)
7987 (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
7988 (add_setshow_filename_cmd, add_setshow_string_cmd)
7989 (add_setshow_string_noescape_cmd)
7990 (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
7991 (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
7992 (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd)
7993 (delete_cmd, add_info, add_info_alias, add_com, add_com_alias):
7994 Make "name" parameter const.
7995 (help_cmd): Rename "command" parameter to "arg". New const local
7997 (find_cmd): Make "command" parameter const.
7998 (lookup_cmd_1): Make "text" parameter pointer to const. Adjust to
7999 deprecated_cmd_warning prototype change.
8000 (undef_cmd_error): Make "cmdtype" parameter const.
8001 (lookup_cmd): Make "line" parameter const.
8002 (deprecated_cmd_warning): Change type of "text" parameter to
8003 pointer to const char, from pointer to pointer to char. Adjust.
8004 (lookup_cmd_composition): Make "text" parameter const.
8005 (complete_on_cmdlist, complete_on_enum): Make "text" and "word"
8007 * cli/cli-decode.h (struct cmd_list_element) <name>: Make field
8009 * cli/cli-script.c (validate_comname): Make "tem" local const.
8010 (define_command): New const local "tem_c". Use it in calls to
8012 (document_command): Make "tem" and "comfull" locals const.
8013 (show_user_1): Make "prefix" and "name" parameters const.
8014 * cli-script.h (show_user_1): Make "prefix" and "name" parameters
8016 * command.h (add_cmd, add_alias_cmd, add_prefix_cmd)
8017 (add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1)
8018 (deprecated_cmd_warning, lookup_cmd_composition, add_com)
8019 (add_com_alias, add_info, add_info_alias, complete_on_cmdlist)
8020 (complete_on_enum, add_setshow_enum_cmd)
8021 (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
8022 (add_setshow_filename_cmd, add_setshow_string_cmd)
8023 (add_setshow_string_noescape_cmd)
8024 (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
8025 (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
8026 (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
8027 Change prototypes, constifying strings.
8028 * completer.c (noop_completer, filename_completer): Make "text"
8029 and "prefix" parameters const.
8030 (location_completer, expression_completer)
8031 (complete_line_internal): Make "text" and "prefix" parameters
8033 (command_completer, signal_completer): Make "text" and "prefix"
8035 * completer.h (noop_completer, filename_completer)
8036 (expression_completer, location_completer, command_completer)
8037 (signal_completer): Change prototypes.
8038 * corefile.c (complete_set_gnutarget): Make "text" and "word"
8040 * cp-abi.c (cp_abi_completer): Likewise.
8041 * expression.h (parse_expression_for_completion): Change
8043 * f-lang.c (f_make_symbol_completion_list): Make "text" and "word"
8045 * infcmd.c (_initialize_infcmd): Make "cmd_name" local const.
8046 * infrun.c (handle_completer): Make "text" and "word" parameters
8048 * interps.c (interpreter_completer): Make "text" and "word"
8050 * language.h (struct language_defn)
8051 <la_make_symbol_completion_list>: Make "text" and "word"
8053 * parse.c (parse_exp_1): Move const hack to parse_exp_in_context.
8054 (parse_exp_in_context): Rename to ...
8055 (parse_exp_in_context_1): ... this.
8056 (parse_exp_in_context): Reimplement, with const hack from
8058 (parse_expression_for_completion): Make "string" parameter const.
8059 * printcmd.c (decode_format): Make "string_ptr" parameter pointer
8060 to pointer to const char. Adjust.
8061 (print_command_1): Make "exp" parameter const.
8062 (output_command): Rename to ...
8063 (output_command_const): ... this. Make "exp" parameter const.
8064 (output_command): Reimplement.
8065 (x_command): Adjust.
8066 (display_command): Rename "exp" parameter to "arg". New "exp"
8067 local, const version of "arg".
8068 * python/py-auto-load.c (gdbpy_initialize_auto_load): Make
8069 "cmd_name" local const.
8070 * python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree
8072 (cmdpy_completer): Make "text" and "word" parameters const.
8073 (gdbpy_parse_command_name): Make "prefix_text2" local const.
8074 * python/py-param.c (add_setshow_generic): Make "tmp_name" local
8076 * remote.c (_initialize_remote): Make "cmd_name" local const.
8077 * symtab.c (language_search_unquoted_string): Make "text" and "p"
8078 parameters const. Adjust.
8079 (completion_list_add_fields): Make "sym_text", "text" and "word"
8081 (struct add_name_data) <sym_text, text, word>: Make fields const.
8082 (default_make_symbol_completion_list_break_on): Make "text" and
8083 "word" parameters const. Adjust locals.
8084 (default_make_symbol_completion_list)
8085 (make_symbol_completion_list, make_symbol_completion_type)
8086 (make_symbol_completion_list_fn): Make "text" and "word"
8088 (make_file_symbol_completion_list): Make "text", "word" and
8089 "srcfile" parameters const. Adjust locals.
8090 (add_filename_to_list): Make "text" and "word" parameters const.
8091 (struct add_partial_filename_data) <text, word>: Make fields
8093 (make_source_files_completion_list): Make "text" and "word"
8095 * symtab.h (default_make_symbol_completion_list_break_on)
8096 (default_make_symbol_completion_list, make_symbol_completion_list)
8097 (make_symbol_completion_type enum type_code)
8098 (make_symbol_completion_list_fn make_file_symbol_completion_list)
8099 (make_source_files_completion_list): Change prototype.
8100 * top.c (execute_command): Adjust to pass pointer to pointer to
8101 const char to lookup_cmd, and to deprecated_cmd_warning prototype
8103 (set_verbose): Make "cmdname" local const.
8104 * tracepoint.c (decode_agent_options): Make "exp" parameter const,
8106 (validate_actionline): Make "line" parameter a pointer to const
8108 (encode_actions_1): Make "action_exp" local const, and adjust.
8109 (encode_actions): Adjust.
8110 (replace_comma): Delete.
8111 (trace_dump_actions): Make "action_exp" and "next_comma" locals
8112 const, and adjust. Don't frob the action string while splitting
8113 it at commas. Instead, make a copy of each split substring in
8115 (trace_dump_command): Adjust to validate_actionline prototype
8117 * tracepoint.h (decode_agent_options, decode_agent_options)
8118 (encode_actions, validate_actionline): Change prototypes.
8119 * valprint.h (output_command): Delete declaration.
8120 (output_command_const): Declare.
8121 * value.c (function_destroyer): Cast const away in xfree call.
8123 2013-03-13 Pedro Alves <palves@redhat.com>
8125 * ada-lang.c (ada_decode_symbol): Cast away constness of GSYMBOL
8126 rather than casting 'const char * const *' to 'const char **'.
8127 * ada-lex.l (processInt): Make "trailer" local const. Remove
8128 'const char **' cast.
8129 * arm-linux-tdep.c (arm_stap_parse_special_token): Add 'char *'
8130 locals, and use those as strtol output pointer, instead than doing
8131 invalid casts to from 'const char **' to 'char **'.
8132 (_initialize_demangle): Remove cast.
8133 * i386-tdep.c (i386_stap_parse_special_token): : Add 'char *'
8134 locals, and use those as strtol output pointer, instead than doing
8135 invalid casts to from 'const char **' to 'char **'.
8136 * solib-dsbt.c (dsbt_get_initial_loadmaps): Remove 'gdb_byte**'
8138 * stap-probe.c (stap_parse_register_operand)
8139 (stap_parse_single_operand): Likewise.
8141 2013-03-13 Yao Qi <yao@codesourcery.com>
8143 * tracepoint.c (tfile_get_trace_state_variable_value): Look for
8144 the last matched 'V' blcok in trace frame.
8146 2013-03-12 Joel Brobecker <brobecker@adacore.com>
8148 * NEWS: Create a new section for the next release branch.
8149 Rename the section of the current branch, now that it has
8152 2013-03-12 Joel Brobecker <brobecker@adacore.com>
8154 GDB 7.6 branch created (branch timestamp: 2013-03-12 22:15 UTC)
8155 * version.in: Bump version to 7.6.50.20130312-cvs.
8157 2013-03-12 Keith Seitz <keiths@redhat.com>
8159 * mi/mi-cmds.h (mi_execute_command): Make "cmd" const.
8160 * mi/mi-interp.c (mi_interpreter_exec): Make "command" const.
8161 Remove temporary copy of input string.
8162 (mi_execute_command_wrapper): Make "cmd" const.
8163 * mi/mi-main.c (mi_execute_command): Make "string_ptr" const.
8164 * mi/mi-parse.c (mi_parse_argv): Make "args" const.
8166 (mi_parse): Make "cmd" const.
8168 * mi/mi-parse.h (mi_parse): Make "cmd" const.
8170 2013-03-12 Keith Seitz <keiths@redhat.com>
8172 * ada-lang.c (ada_read_renaming_var_value): Pass const
8173 pointer to expression string to parse_exp_1.
8174 (create_excep_cond_exprs): Likewise.
8175 * ax-gdb.c (agent_eval_command_one): Likewise.
8176 (maint_agent_printf_command): Likewise.
8177 Constify much of the string handling/parsing.
8178 * breakpoint.c (set_breakpoint_condition): Pass const
8179 pointer to expression string to parse_exp_1.
8180 (update_watchpoint): Likewise.
8181 (parse_cmd_to_aexpr): Constify string handling.
8182 Pass const pointer to parse_exp_1.
8183 (init_breakpoint_sal): Pass const pointer to parse_exp_1.
8184 (find_condition_and_thread): Likewise.
8186 (watch_command_1): Make "arg" const.
8187 Constify string handling.
8188 Copy the expression string instead of changing the input
8190 (update_breakpoint_location): Pass const pointer to
8192 * eval.c (parse_and_eval_address): Make "exp" const.
8193 (parse_to_comma_and_eval): Make "expp" const.
8194 (parse_and_eval): Make "exp" const.
8195 * expression.h (parse_expression): Make argument const.
8196 (parse_exp_1): Make first argument const.
8197 * findcmd.c (parse_find_args): Treat "args" as const.
8198 * linespec.c (parse_linespec): Pass const pointer to
8199 linespec_expression_to_pc.
8200 (linespec_expression_to_pc): Make "exp_ptr" const.
8201 * parse.c (parse_exp_1): Make "stringptr" const.
8202 Make a copy of the expression to pass to parse_exp_in_context until
8203 this whole interface can be constified.
8204 (parse_expression): Make "string" const.
8205 * printcmd.c (ui_printf): Treat "arg" as const.
8206 Handle const strings.
8207 * tracepoint.c (validate_actionline): Pass const pointer to
8208 all calls to parse_exp_1.
8209 (encode_actions_1): Likewise.
8210 * value.h (parse_to_comma_and_eval): Make argument const.
8211 (parse_and_eval_address): Likewise.
8212 (parse_and_eval): Likewise.
8213 * varobj.c (varobj_create): Pass const pointer to parse_exp_1.
8214 (varobj_set_value): Likewise.
8215 * cli/cli-cmds.c (disassemble_command): Treat "arg" as const and
8216 constify string handling.
8217 Pass const pointers to parse_and_eval_address and
8218 parse_to_comman_and_eval.
8219 * cli/cli-utils.c (skip_to_space): Rename to ...
8220 (skip_to_space_const): ... this. Handle const strings.
8221 * cli/cli-utils.h (skip_to_space): Turn into macro which invokes
8222 skip_to_space_const.
8223 (skip_to_space_const): Declare.
8224 * common/format.c (parse_format_string): Make "arg" const.
8225 Handle const strings.
8226 * common/format.h (parse_format_string): Make "arg" const.
8227 * gdbserver/ax.c (ax_printf): Make "format" const.
8228 * python/python.c (gdbpy_parse_and_eval): Do not make a copy
8229 of the expression string.
8231 2013-03-12 Hui Zhu <hui@codesourcery.com>
8233 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Update error message.
8235 2013-03-12 Yao Qi <yao@codesourcery.com>
8236 Hui Zhu <hui@codesourcery.com>
8238 * dwarf2loc.c (access_memory): Change nbits to nbytes in gdb_assert.
8239 (dwarf2_compile_expr_to_ax): Call access_memory in DW_OP_deref and
8242 2013-03-12 Paul Hilfinger <hilfingr@adacore.com>
8244 * ada-lex.l (rules): Only recognize 'thread' as a
8245 delimiter when followed by numerals, as for c-exp.y.
8246 Use new rewind_to_char function to rewind the input for
8247 expression-delimiting tokens.
8248 (rewind_to_char): New function.
8250 2013-03-11 Pedro Alves <palves@redhat.com>
8251 Jan Kratochvil <jan.kratochvil@redhat.com>
8253 * configure: Regenerate.
8254 * configure.ac (check dynamic export flag): Link python test with
8257 2013-03-11 Doug Evans <dje@google.com>
8258 Keith Seitz <keiths@redhat.com>
8260 * linespec.c (find_linespec_symbols): Call find_function_symbols
8261 first, and then call lookup_prefix_sym/find_method.
8263 2013-03-11 Pedro Alves <palves@redhat.com>
8265 * charset.c (convert_between_encodings): Don't cast between
8266 different pointer to pointer types. Instead, make the 'inp' local
8267 be of the type iconv expects.
8268 (wchar_iterate): Don't cast between different pointer to pointer
8269 types. Instead, use new pointer local of the type iconv expects.
8270 * target.c (target_read_stralloc, target_fileio_read_stralloc):
8271 Add new local of type char pointer, and use it to get a
8272 char/string view of the byte buffer, instead of casting between
8273 pointer to pointer types.
8275 2013-03-11 Hafiz Abid Qadeer <abidh@codesourcery.com>
8277 * remote.c (remote_set_trace_buffer_size): Move != operator
8278 to the start of next line to fix an ARI warning.
8280 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8282 * NEWS: Add record changes.
8284 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8286 * record-btrace.c (btrace_insn_history): Omit the pc prefix in
8287 the instruction history disassembly.
8288 * disasm.c (dump_insns): Omit the pc prefix, if requested.
8289 * disasm.h (DISASSEMBLY_OMIT_PC): New.
8291 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8293 * Makefile.in (SFILES): Add record-btrace.c
8294 (COMMON_OBS): Add record-btrace.o
8295 * record-btrace.c: New.
8296 * objfiles.c: Include btrace.h.
8297 (free_objfile): call btrace_free_objfile.
8299 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8301 * target.c (target_call_history, target_call_history_from,
8302 target_call_history_range): New.
8303 * target.h (target_ops) <to_call_history, to_call_history_from,
8304 to_call_history_range>: New fields.
8305 (target_call_history, target_call_history_from,
8306 target_call_history_range): New declaration.
8307 * record.c (get_call_history_modifiers, cmd_record_call_history,
8308 record_call_history_size): New.
8309 (_initialize_record): Add the "record function-call-history" command.
8310 Add "set/show record function-call-history-size" commands.
8311 * record.h (record_print_flag): New.
8313 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8315 * target.h (target_ops) <to_insn_history, to_insn_history_from,
8316 to_insn_history_range>: New fields.
8317 (target_insn_history): New.
8318 (target_insn_history_from): New.
8319 (target_insn_history_range): New.
8320 * target.c (target_insn_history): New.
8321 (target_insn_history_from): New.
8322 (target_insn_history_range): New.
8323 * record.c: Include cli/cli-utils.h, disasm.h, ctype.h.
8324 (record_insn_history_size): New.
8325 (get_insn_number): New.
8326 (get_context_size): New.
8328 (get_insn_history_modifiers): New.
8329 (cmd_record_insn_history): New.
8330 (_initialize_record): Add "set/show record instruction-history-size"
8331 command. Add "record instruction-history" command.
8333 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8335 * record.h (record_disconnect): New.
8336 (record_detach): New.
8337 (record_mourn_inferior): New.
8339 * record-full.c (record_disconnect, record_detach,
8340 record_mourn_inferior, record_kill): Move to...
8341 * record.c: ...here.
8344 (record_unpush): New.
8345 (cmd_record_stop): Call record_stop. Replace unpush_target
8346 call with record_unpush call.
8347 (record_disconnect, record_detach): Assert that the target
8348 is of record stratum. Call record_unpush, record_stop, and
8350 (record_mourn_inferior, record_kill): Assert that the target
8351 is of record stratum. Call record_unpush and DEBUG.
8353 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8355 * record-full.h, record-full.c (record_memory_query): Rename
8357 (record_full_memory_query): ...this. Update all users.
8358 (record_arch_list_add_reg): Rename to ...
8359 (record_full_arch_list_add_reg): ...this. Update all users.
8360 (record_arch_list_add_mem): Rename to ...
8361 (record_full_arch_list_add_mem): ...this. Update all users.
8362 (record_arch_list_add_end): Rename to ...
8363 (record_full_arch_list_add_end): ...this. Update all users.
8364 (record_gdb_operation_disable_set): Rename to ...
8365 (record_full_gdb_operation_disable_set): ...this.
8368 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8370 * record-full.c (DEFAULT_RECORD_INSN_MAX_NUM): Renamed to ...
8371 (DEFAULT_RECORD_FULL_INSN_MAX_NUM): ... this. Updated all users.
8372 (RECORD_IS_REPLAY): Renamed to ...
8373 (RECORD_FULL_IS_REPLAY): ... this. Updated all users.
8374 (RECORD_FILE_MAGIC): Renamed to ...
8375 (RECORD_FULL_FILE_MAGIC): ... this. Updated all users.
8376 (record_mem_entry): Renamed to ...
8377 (record_full_mem_entry): ... this. Updated all users.
8378 (record_reg_entry): Renamed to ...
8379 (record_full_reg_entry): ... this. Updated all users.
8380 (record_end_entry): Renamed to ...
8381 (record_full_end_entry): ... this. Updated all users.
8382 (record_type) <record_end, record_reg, record_mem>: Renamed
8384 (record_full_type) <record_full_end, record_full_reg,
8385 record_full_mem>: ... this. Updated all users.
8386 (record_entry): Renamed to ...
8387 (record_full_entry): ... this. Updated all users.
8388 (record_core_buf_entry): Renamed to ...
8389 (record_full_core_buf_entry): ... this. Updated all users.
8390 (record_core_regbuf): Renamed to ...
8391 (record_full_core_regbuf): ... this. Updated all users.
8392 (record_core_start): Renamed to ...
8393 (record_full_core_start): ... this. Updated all users.
8394 (record_core_end): Renamed to ...
8395 (record_full_core_end): ... this. Updated all users.
8396 (record_core_buf_list): Renamed to ...
8397 (record_full_core_buf_list): ... this. Updated all users.
8398 (record_first): Renamed to ...
8399 (record_full_first): ... this. Updated all users.
8400 (record_list): Renamed to ...
8401 (record_full_list): ... this. Updated all users.
8402 (record_arch_list_head): Renamed to ...
8403 (record_full_arch_list_head): ... this. Updated all users.
8404 (record_arch_list_tail): Renamed to ...
8405 (record_full_arch_list_tail): ... this. Updated all users.
8406 (record_stop_at_limit): Renamed to ...
8407 (record_full_stop_at_limit): ... this. Updated all users.
8408 (record_insn_max_num): Renamed to ...
8409 (record_full_insn_max_num): ... this. Updated all users.
8410 (record_insn_num): Renamed to ...
8411 (record_full_insn_num): ... this. Updated all users.
8412 (record_insn_count): Renamed to ...
8413 (record_full_insn_count): ... this. Updated all users.
8414 (record_ops): Renamed to ...
8415 (record_full_ops): ... this. Updated all users.
8416 (record_core_ops): Renamed to ...
8417 (record_full_core_ops): ... this. Updated all users.
8418 (set_record_cmdlist): Renamed to ...
8419 (set_record_full_cmdlist): ... this. Updated all users.
8420 (show_record_cmdlist): Renamed to ...
8421 (show_record_full_cmdlist): ... this. Updated all users.
8422 (record_cmdlist): Renamed to ...
8423 (record_full_cmdlist): ... this. Updated all users.
8424 (record_beneath_to_resume_ops): Renamed to ...
8425 (record_full_beneath_to_resume_ops): ... this. Updated all users.
8426 (record_beneath_to_resume): Renamed to ...
8427 (record_full_beneath_to_resume): ... this. Updated all users.
8428 (record_beneath_to_wait_ops): Renamed to ...
8429 (record_full_beneath_to_wait_ops): ... this. Updated all users.
8430 (record_beneath_to_wait): Renamed to ...
8431 (record_full_beneath_to_wait): ... this. Updated all users.
8432 (record_beneath_to_store_registers_ops): Renamed to ...
8433 (record_full_beneath_to_store_registers_ops): ... this.
8435 (record_beneath_to_store_registers): Renamed to ...
8436 (record_full_beneath_to_store_registers): ... this.
8438 (record_beneath_to_xfer_partial_ops): Renamed to ...
8439 (record_full_beneath_to_xfer_partial_ops): ... this.
8441 (record_beneath_to_xfer_partial): Renamed to ...
8442 (record_full_beneath_to_xfer_partial): ... this.
8444 (record_beneath_to_insert_breakpoint): Renamed to ...
8445 (record_full_beneath_to_insert_breakpoint): ... this.
8447 (record_beneath_to_stopped_by_watchpoint): Renamed to ...
8448 (record_full_beneath_to_stopped_by_watchpoint): ... this.
8450 (record_beneath_to_stopped_data_address): Renamed to ...
8451 (record_full_beneath_to_stopped_data_address): ... this.
8453 (record_beneath_to_async): Renamed to ...
8454 (record_full_beneath_to_async): ... this. Updated all users.
8455 (record_goto_insn): Renamed to ...
8456 (record_full_goto_insn): ... this. Updated all users.
8457 (record_save): Renamed to ...
8458 (record_full_save): ... this. Updated all users.
8459 (record_reg_alloc): Renamed to ...
8460 (record_full_reg_alloc): ... this. Updated all users.
8461 (record_reg_release): Renamed to ...
8462 (record_full_reg_release): ... this. Updated all users.
8463 (record_mem_alloc): Renamed to ...
8464 (record_full_mem_alloc): ... this. Updated all users.
8465 (record_mem_release): Renamed to ...
8466 (record_full_mem_release): ... this. Updated all users.
8467 (record_end_alloc): Renamed to ...
8468 (record_full_end_alloc): ... this. Updated all users.
8469 (record_end_release): Renamed to ...
8470 (record_full_end_release): ... this. Updated all users.
8471 (record_entry_release): Renamed to ...
8472 (record_full_entry_release): ... this. Updated all users.
8473 (record_list_release): Renamed to ...
8474 (record_full_list_release): ... this. Updated all users.
8475 (record_list_release_following): Renamed to ...
8476 (record_full_list_release_following): ... this.
8478 (record_list_release_first): Renamed to ...
8479 (record_full_list_release_first): ... this. Updated all users.
8480 (record_arch_list_add): Renamed to ...
8481 (record_full_arch_list_add): ... this. Updated all users.
8482 (record_get_loc): Renamed to ...
8483 (record_full_get_loc): ... this. Updated all users.
8484 (record_check_insn_num): Renamed to ...
8485 (record_full_check_insn_num): ... this. Updated all users.
8486 (record_arch_list_cleanups): Renamed to ...
8487 (record_full_arch_list_cleanups): ... this. Updated all users.
8488 (record_message): Renamed to ...
8489 (record_full_message): ... this. Updated all users.
8490 (record_message_wrapper): Renamed to ...
8491 (record_full_message_wrapper): ... this. Updated all users.
8492 (record_message_wrapper_safe): Renamed to ...
8493 (record_full_message_wrapper_safe): ... this. Updated all users.
8494 (record_gdb_operation_disable): Renamed to ...
8495 (record_full_gdb_operation_disable): ... this. Updated all users.
8496 (record_hw_watchpoint): Renamed to ...
8497 (record_full_hw_watchpoint): ... this. Updated all users.
8498 (record_exec_insn): Renamed to ...
8499 (record_full_exec_insn): ... this. Updated all users.
8500 (record_restore): Renamed to ...
8501 (record_full_restore): ... this. Updated all users.
8502 (record_async_inferior_event_token): Renamed to ...
8503 (record_full_async_inferior_event_token): ... this.
8505 (record_async_inferior_event_handler): Renamed to ...
8506 (record_full_async_inferior_event_handler): ... this.
8508 (record_core_open_1): Renamed to ...
8509 (record_full_core_open_1): ... this. Updated all users.
8510 (record_open_1): Renamed to ...
8511 (record_full_open_1): ... this. Updated all users.
8512 (record_open): Renamed to ...
8513 (record_full_open): ... this. Updated all users.
8514 (record_close): Renamed to ...
8515 (record_full_close): ... this. Updated all users.
8516 (record_resume_step): Renamed to ...
8517 (record_full_resume_step): ... this. Updated all users.
8518 (record_resumed): Renamed to ...
8519 (record_full_resumed): ... this. Updated all users.
8520 (record_execution_dir): Renamed to ...
8521 (record_full_execution_dir): ... this. Updated all users.
8522 (record_resume): Renamed to ...
8523 (record_full_resume): ... this. Updated all users.
8524 (record_get_sig): Renamed to ...
8525 (record_full_get_sig): ... this. Updated all users.
8526 (record_sig_handler): Renamed to ...
8527 (record_full_sig_handler): ... this. Updated all users.
8528 (record_wait_cleanups): Renamed to ...
8529 (record_full_wait_cleanups): ... this. Updated all users.
8530 (record_wait_1): Renamed to ...
8531 (record_full_wait_1): ... this. Updated all users.
8532 (record_wait): Renamed to ...
8533 (record_full_wait): ... this. Updated all users.
8534 (record_stopped_by_watchpoint): Renamed to ...
8535 (record_full_stopped_by_watchpoint): ... this. Updated all users.
8536 (record_disconnect): Renamed to ...
8537 (record_full_disconnect): ... this. Updated all users.
8538 (record_detach): Renamed to ...
8539 (record_full_detach): ... this. Updated all users.
8540 (record_mourn_inferior): Renamed to ...
8541 (record_full_mourn_inferior): ... this. Updated all users.
8542 (record_kill): Renamed to ...
8543 (record_full_kill): ... this. Updated all users.
8544 (record_stopped_data_address): Renamed to ...
8545 (record_full_stopped_data_address): ... this. Updated all users.
8546 (record_registers_change): Renamed to ...
8547 (record_full_registers_change): ... this. Updated all users.
8548 (record_store_registers): Renamed to ...
8549 (record_full_store_registers): ... this. Updated all users.
8550 (record_xfer_partial): Renamed to ...
8551 (record_full_xfer_partial): ... this. Updated all users.
8552 (record_breakpoint): Renamed to ...
8553 (record_full_breakpoint): ... this. Updated all users.
8554 (record_breakpoint_p): Renamed to ...
8555 (record_full_breakpoint_p): ... this. Updated all users.
8556 (record_breakpoints): Renamed to ...
8557 (record_full_breakpoints): ... this. Updated all users.
8558 (record_sync_record_breakpoints): Renamed to ...
8559 (record_full_sync_record_breakpoints): ... this.
8561 (record_init_record_breakpoints): Renamed to ...
8562 (record_full_init_record_breakpoints): ... this.
8564 (record_insert_breakpoint): Renamed to ...
8565 (record_full_insert_breakpoint): ... this. Updated all users.
8566 (record_remove_breakpoint): Renamed to ...
8567 (record_full_remove_breakpoint): ... this. Updated all users.
8568 (record_can_execute_reverse): Renamed to ...
8569 (record_full_can_execute_reverse): ... this. Updated all users.
8570 (record_get_bookmark): Renamed to ...
8571 (record_full_get_bookmark): ... this. Updated all users.
8572 (record_goto_bookmark): Renamed to ...
8573 (record_full_goto_bookmark): ... this. Updated all users.
8574 (record_async): Renamed to ...
8575 (record_full_async): ... this. Updated all users.
8576 (record_can_async_p): Renamed to ...
8577 (record_full_can_async_p): ... this. Updated all users.
8578 (record_is_async_p): Renamed to ...
8579 (record_full_is_async_p): ... this. Updated all users.
8580 (record_execution_direction): Renamed to ...
8581 (record_full_execution_direction): ... this. Updated all users.
8582 (record_info): Renamed to ...
8583 (record_full_info): ... this. Updated all users.
8584 (record_delete): Renamed to ...
8585 (record_full_delete): ... this. Updated all users.
8586 (record_is_replaying): Renamed to ...
8587 (record_full_is_replaying): ... this. Updated all users.
8588 (record_goto_entry): Renamed to ...
8589 (record_full_goto_entry): ... this. Updated all users.
8590 (record_goto_begin): Renamed to ...
8591 (record_full_goto_begin): ... this. Updated all users.
8592 (record_goto_end): Renamed to ...
8593 (record_full_goto_end): ... this. Updated all users.
8594 (record_goto): Renamed to ...
8595 (record_full_goto): ... this. Updated all users.
8596 (init_record_ops): Renamed to ...
8597 (init_record_full_ops): ... this. Updated all users.
8598 (record_core_resume): Renamed to ...
8599 (record_full_core_resume): ... this. Updated all users.
8600 (record_core_kill): Renamed to ...
8601 (record_full_core_kill): ... this. Updated all users.
8602 (record_core_fetch_registers): Renamed to ...
8603 (record_full_core_fetch_registers): ... this. Updated all users.
8604 (record_core_prepare_to_store): Renamed to ...
8605 (record_full_core_prepare_to_store): ... this. Updated all users.
8606 (record_core_store_registers): Renamed to ...
8607 (record_full_core_store_registers): ... this. Updated all users.
8608 (record_core_xfer_partial): Renamed to ...
8609 (record_full_core_xfer_partial): ... this. Updated all users.
8610 (record_core_insert_breakpoint): Renamed to ...
8611 (record_full_core_insert_breakpoint): ... this. Updated all users.
8612 (record_core_remove_breakpoint): Renamed to ...
8613 (record_full_core_remove_breakpoint): ... this. Updated all users.
8614 (record_core_has_execution): Renamed to ...
8615 (record_full_core_has_execution): ... this. Updated all users.
8616 (init_record_core_ops): Renamed to ...
8617 (init_record_full_core_ops): ... this. Updated all users.
8618 (cmd_record_restore): Renamed to ...
8619 (cmd_record_full_restore): ... this. Updated all users.
8620 (record_save_cleanups): Renamed to ...
8621 (record_full_save_cleanups): ... this. Updated all users.
8622 (cmd_record_start): Renamed to ...
8623 (cmd_record_full_start): ... this. Updated all users.
8624 (set_record_insn_max_num): Renamed to ...
8625 (set_record_full_insn_max_num): ... this. Updated all users.
8626 (set_record_command): Renamed to ...
8627 (set_record_full_command): ... this. Updated all users.
8628 (show_record_command): Renamed to ...
8629 (show_record_full_command): ... this. Updated all users.
8630 (_initialize_record): Renamed to ...
8631 (_initialize_record_full): ... this. Updated all users.
8633 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8635 * record.h: Split into this and ...
8636 * record-full.h: ... this.
8637 * record.c: Split into this and ...
8638 * record-full.c: ... this.
8639 * target.h (target_ops): Add new fields to_info_record,
8640 to_save_record, to_delete_record, to_record_is_replaying,
8641 to_goto_record_begin, to_goto_record_end, to_goto_record.
8642 (target_info_record): New.
8643 (target_save_record): New.
8644 (target_supports_delete_record): New.
8645 (target_delete_record): New.
8646 (target_record_is_replaying): New.
8647 (target_goto_record_begin): New.
8648 (target_goto_record_end): New.
8649 (target_goto_record): New.
8650 * target.c (target_info_record): New.
8651 (target_save_record): New.
8652 (target_supports_delete_record): New.
8653 (target_delete_record): New.
8654 (target_record_is_replaying): New.
8655 (target_goto_record_begin): New.
8656 (target_goto_record_end): New.
8657 (target_goto_record): New.
8658 * record.h: Declare struct cmd_list_element.
8659 (record_cmdlist): New declaration.
8660 (set_record_cmdlist): New declaration.
8661 (show_record_cmdlist): New declaration.
8662 (info_record_cmdlist): New declaration.
8663 (cmd_record_goto): New declaration.
8664 * record.c: Remove unnecessary includes.
8666 (cmd_record_goto): Remove declaration.
8667 (record_cmdlist): Now extern. Initialize.
8668 (set_record_cmdlist): Now extern. Initialize.
8669 (show_record_cmdlist): Now extern. Initialize.
8670 (info_record_cmdlist): Now extern. Initialize.
8671 (find_record_target): New.
8672 (require_record_target): New.
8673 (cmd_record_start): Update.
8674 (cmd_record_delete): Remove target-specific code.
8675 Call target_delete_record.
8676 (cmd_record_stop): Unpush any record target.
8677 (set_record_insn_max_num): Move to record-full.c
8678 (set_record_command): Add comment.
8679 (show_record_command): Add comment.
8680 (info_record_command): Update comment.
8681 Remove target-specific code.
8682 Call the record target's to_info_record.
8683 (cmd_record_start): New.
8684 (cmd_record_goto): Now extern.
8685 Remove target-specific code.
8686 Call target_goto_begin, target_goto_end, or target_goto.
8687 (_initialize_record): Move record target ops initialization to
8689 Change "record" command help text.
8690 Move "record restore", "record set", and "record show" commands to
8692 * Makefile.in (SFILES): Add record-full.c.
8693 (HFILES_NO_SRCDIR): Add record-full.h.
8694 (COMMON_OBS): Add record-full.o.
8695 * amd64-linux-tdep.c: Include record-full.h instead of record.h.
8696 * arm-tdep.c: Include record-full.h.
8697 * i386-linux-tdep.c: Include record-full.h instead of record.h.
8698 * i386-tdep.c: Include record-full.h.
8699 * infrun.c: Include record-full.h.
8700 * linux-record.c: Include record-full.h.
8701 * moxie-tdep.c: Include record-full.h.
8702 * record-full.c: Include record-full.h.
8703 Change module comment.
8704 (set_record_full_cmdlist): New.
8705 (show_record_full_cmdlist): New.
8706 (record_full_cmdlist): New.
8707 (record_goto_insn): New declaration.
8708 (record_save): New declaration.
8709 (record_check_insn_num): Change query string.
8711 (record_delete): New.
8712 (record_is_replaying): New.
8713 (record_goto_entry): New.
8714 (record_goto_begin): New.
8715 (record_goto_end): New.
8717 (init_record_ops): Update.
8718 (init_record_core_ops): Update.
8719 (cmd_record_save): Rename to record_save. Remove target and arg checks.
8720 (cmd_record_start): New.
8721 (set_record_insn_max_num): Moved from record.c
8722 (set_record_full_command): New.
8723 (show_record_full_command): New.
8724 (_initialize_record_full): New.
8726 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8728 * target.h (add_deprecated_target_alias): New.
8729 * target.c (add_deprecated_target_alias): New.
8731 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8733 * common/linux-btrace.c: Include sys/ptrace, sys/types, sys/wait.h,
8735 (linux_supports_btrace): Add kernel and
8737 (kernel_supports_btrace): New function.
8738 (cpu_supports_btrace): New function.
8739 (intel_supports_btrace): New function.
8741 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8743 * target.h (enum target_object): Add TARGET_OBJECT_BTRACE.
8744 * remote.c: Include btrace.h.
8745 (struct btrace_target_info): New struct.
8746 (remote_supports_btrace): New function.
8747 (send_Qbtrace): New function.
8748 (remote_enable_btrace): New function.
8749 (remote_disable_btrace): New function.
8750 (remote_teardown_btrace): New function.
8751 (remote_read_btrace): New function.
8752 (init_remote_ops): Add btrace ops.
8753 (enum <unnamed>): Add btrace packets.
8754 (struct protocol_feature remote_protocol_features[]): Add btrace packets.
8755 (_initialize_remote): Add packet configuration for branch tracing.
8757 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8759 * features/btrace.dtd: New file.
8760 * Makefile.in (XMLFILES): Add btrace.dtd.
8761 * btrace.h (parse_xml_btrace): New declaration.
8762 * btrace.c: Include xml-support.h.
8763 (parse_xml_btrace): New function.
8764 (parse_xml_btrace_block): New function.
8765 (block_attributes): New struct.
8766 (btrace_attributes): New struct.
8767 (btrace_children): New struct.
8768 (btrace_elements): New struct.
8770 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8772 * amd64-linux-nat.c: Include btrace.h and linux-btrace.h.
8773 (amd64_linux_enable_btrace): New.
8774 (amd64_linux_disable_btrace): New.
8775 (amd64_linux_teardown_btrace): New.
8776 (_initialize_amd64_linux_nat): Initialize btrace ops.
8777 * i386-linux.nat.c: Include btrace.h and linux-btrace.h.
8778 (i386_linux_enable_btrace): New.
8779 (i386_linux_disable_btrace): New.
8780 (i386_linux_teardown_btrace): New.
8781 (_initialize_i386_linux_nat): Initialize btrace ops.
8782 * config/i386/linux.mh: Add linux-btrace.o.
8783 * config/i386/linux64.mh: Add linux-btrace.o.
8785 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8787 * common/linux_btrace.h: New file.
8788 * common/linux_btrace.c: New file.
8789 * Makefile.in (SFILES): Add btrace.c.
8790 (HFILES_NO_SRCDIR): Add common/linux-btrace.h.
8791 (COMMON_OBS): Add btrace.o.
8792 (linux-btrace.o): New rule.
8794 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8796 * target.h: Include btrace.h.
8797 (struct target_ops) <to_supports_btrace, to_enable_btrace,
8798 to_disable_btrace, to_teardown_btrace, to_read_btrace>: New.
8799 * target.c (target_supports_btrace): New function.
8800 (target_enable_btrace): New function.
8801 (target_disable_btrace): New function.
8802 (target_teardown_btrace): New function.
8803 (target_read_btrace): New function.
8804 * btrace.h: New file.
8805 * btrace.c: New file.
8806 * Makefile.in: Add btrace.c.
8807 * gdbthread.h: Include btrace.h.
8808 (struct thread_info): Add btrace field.
8809 * thread.c: Include btrace.h.
8810 (clear_thread_inferior_resources): Call target_teardown_btrace.
8811 * common/btrace-common.h: New file.
8813 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
8815 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Call also kill
8816 for CHILD, ignore PTRACE_KILL errors, move the inner block variable
8817 kill_status to outer block.
8819 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
8821 Fix entry-values if the callee called a noreturn function.
8822 * dwarf2-frame-tailcall.c (dwarf2_tailcall_sniffer_first): Use
8823 get_frame_address_in_block. Add new comment.
8825 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
8827 Fix entry-values in C++ across CUs.
8828 * dwarf2loc.c (call_site_to_target_addr) <FIELD_LOC_KIND_PHYSNAME>: Use
8829 lookup_minimal_symbol. Add a comment.
8831 (read_call_site_scope) <is_ref_attr> <die_is_declaration>: Prefer
8834 2013-03-08 Yao Qi <yao@codesourcery.com>
8836 * tracepoint.c (_initialize_tracepoint): Indent the code.
8838 2013-03-08 Pedro Alves <palves@redhat.com>
8840 * findcmd.c (put_bits): Change type of parameter to 'gdb_byte *'.
8841 (parse_find_args, find_command): Change type of pattern buffer
8842 locals to 'gdb_byte *'.
8844 2013-03-08 Stan Shebs <stan@codesourcery.com>
8845 Hafiz Abid Qadeer <abidh@codesourcery.com>
8847 * NEWS: Mention set and show trace-buffer-size commands.
8849 * target.h (struct target_ops): New method
8850 to_set_trace_buffer_size.
8851 (target_set_trace_buffer_size): New macro.
8852 * target.c (update_current_target): Set up new method.
8853 * tracepoint.c (trace_buffer_size): New global.
8854 (start_tracing): Send it to the target.
8855 (set_trace_buffer_size): New function.
8856 (_initialize_tracepoint): Add new setshow for trace-buffer-size.
8857 * remote.c (remote_set_trace_buffer_size): New function.
8858 (_initialize_remote): Use it.
8859 (QTBuffer:size) New remote command.
8860 (PACKET_QTBuffer_size): New enum.
8861 (remote_protocol_features): Add an entry for
8862 PACKET_QTBuffer_size.
8864 2013-03-08 Tom Tromey <tromey@redhat.com>
8866 * remote-m32r-sdi.c (m32r_load): Call skip_spaces on correct
8869 2013-03-07 Pedro Alves <palves@redhat.com>
8871 * target.c (target_read_stralloc, target_fileio_read_alloc):
8872 *Cast pointer to 'gdb_byte *' in target call.
8874 2013-03-07 Pedro Alves <palves@redhat.com>
8876 * corefile.c (read_memory_string): Cast pointer to gdb_byte* in
8879 2013-03-07 Keith Seitz <keiths@redhat.com>
8881 * breakpoint.c (catch_syscall_split_args): Use skip_spaces.
8882 (trace_pass_command): Likewise.
8883 * cli/cli-cmds.c: Include cli/cli-utils.h.
8884 (source_command): Use skip-spaces.
8885 (disassemble_command): Likewise.
8886 * findcmd.c: Include cli/cli-utils.h.
8887 (parse_find_args): Use skip_spaces.
8888 * go32-nat.c: Include cli/cli-utils.h.
8889 (go32_sldt): Use skip_spaces.
8890 (go32_sgdt): Likewise.
8891 (go32_sidt): Likewise.
8892 (go32_pde): Likewise.
8893 (go32_pte): Likewise.
8894 (go32_pte_for_address): Likewise.
8895 * infcmd.c: Include cli/cli-utils.h.
8896 (registers_info): Use skip_spaces.
8897 * linux-tdep.c (read_mapping): Use skip_spaces_const.
8898 (linux_info_proc): Likewise.
8899 * linux-thread-db.c: Include cli/cli-utils.h.
8900 (info_auto_load_libthread_db): Use skip_spaces_const.
8901 * m32r-rom.c: Include cli/cli-utils.h.
8902 (m32r_upload_command): Use skip_spaces.
8903 * maint.c: Include cli/cli-utils.h.
8904 (maintenance_translate_address): Use skip_spaces.
8905 * mi/mi-parse.c: Include cli/cli-utils.h.
8906 (mi_parse_argv): Use skip_spaces.
8907 (mi_parse): Likewise.
8908 * minsyms.c: Include cli/cli-utils.h.
8909 (msymbol_hash_iw): Use skip_spaces_const.
8910 * objc-lang.c: Include cli/cli-utils.h.
8911 (parse_selector): Use skip_spaces.
8912 (parse_method): Likewise.
8913 * python/python.c: Include cli/cli-utils.h.
8914 (python_interactive_command)[HAVE_PYTHON]: Use skip_spaces.
8915 (python_command)[HAVE_PYTHON]: Likewise.
8916 (python_interactive_command)[!HAVE_PYTHON]: Likewise.
8917 * remote-m32r-sdi.c: Include cli/cli-utils.h.
8918 (m32r_load): Use skip_spaces.
8919 * serial.c: Include cli/cli-utils.h.
8920 (serial_open): Use skip_spaces_const.
8921 * stack.c: Include cli/cli-utils.h.
8922 (parse_frame_specification_1): Use skip_spaces_const.
8923 * symfile.c: Include cli/cli-utils.h.
8924 (set_ext_lang_command): Use skip_spaces.
8925 * symtab.c: Include cli/cli-utils.h.
8926 (rbreak_command): Use skip_spaces.
8927 * thread.c (thread_name_command): Use skip_spaces.
8928 * tracepoint.c (validate_actionline): Use skip_spaces.
8929 (encode_actions_1): Likewise.
8930 (trace_find_range_command): Likewise.
8931 (trace_find_outside_command): Likewise.
8932 (trace_dump_actions): Likewise.
8934 2013-03-07 Pedro Alves <palves@redhat.com>
8936 * c-lang.c (parse_one_string): Cast argument to gdb_byte *.
8937 * expprint.c (print_subexp_standard): Likewise.
8938 * utils.c (host_char_to_target): Likewise.
8939 * valprint.c (generic_emit_char, generic_printstr): Likewise.
8940 * varobj.c (value_get_print_value): Change type of local to char*.
8941 Cast it gdb_byte * in call to language printer.
8943 2013-03-07 Pedro Alves <palves@redhat.com>
8945 * charset.c (struct wchar_iterator) <input>: Change type to 'const
8947 (make_wchar_iterator): Remove cast to char*.
8948 (wchar_iterate): Change type of local.
8950 2013-03-07 Pedro Alves <palves@redhat.com>
8952 * regcache.c (regcache_xmalloc_1): Call XCALLOC with signed char
8953 for 'regcache->register_status'.
8955 2013-03-07 Pedro Alves <palves@redhat.com>
8957 * breakpoint.c (breakpoint_xfer_memory): Change type of local to
8960 2013-03-07 Pedro Alves <palves@redhat.com>
8962 * stap-probe.c (handle_stap_probe): Add cast to char*.
8964 2013-03-07 Pedro Alves <palves@redhat.com>
8966 * linux-record.c (record_linux_system_call) <gdb_sys_msgrcv,
8967 RECORD_MSGRCV>: Pass a signed variable to
8968 regcache_raw_read_signed, instead of an unsigned one.
8970 2013-03-07 Pedro Alves <palves@redhat.com>
8972 * remote-notif.c (notif_debug): Change type to int.
8973 * remote-notif.h (notif_debug): Likewise.
8975 2013-03-07 Pedro Alves <palves@redhat.com>
8977 * ser-tcp.c (tcp_retry_limit): Change type to unsigned int.
8979 2013-03-07 Pedro Alves <palves@redhat.com>
8981 * remote.c (hex2bin, bin2hex): Move extern declarations to ...
8982 * remote.h (hex2bin, bin2hex): ... here.
8983 * tracepoint.c (hex2bin, bin2hex): Remove extern declarations.
8985 2013-03-07 Eli Zaretskii <eliz@gnu.org>
8987 * utils.c (initialize_utils): Improve doc strings of "set/show
8988 width", "set/show height", and "set/show pagination".
8990 2013-03-06 Keith Seitz <keiths@redhat.com>
8992 * ax-gdb.c (gen_printf): Make FORMAT const.
8993 * ax-gdb.h (gen_printf): Likewise.
8994 * ax-general.c (ax_string): Make STR const.
8995 * ax.h (ax_string): Likewise.
8997 2013-03-06 Doug Evans <dje@google.com>
8999 * elfread.c (elf_symfile_read): Move debugging printf to more
9002 2013-03-06 Pedro Alves <palves@redhat.com>
9004 * python/py-utils.c (target_string_to_unicode): Delete function.
9005 * python/python-internal.h (target_string_to_unicode): Delete
9008 2013-03-06 Pierre Muller <muller@sourceware.org>
9010 * linespec.c (get_current_search_block): ARI fix, use (void)
9011 for empty parameter list.
9013 2013-03-05 Doug Evans <dje@google.com>
9015 * ada-lang.c (ada_lookup_symbol_list_worker): New function, contents
9016 of old ada_lookup_symbol_list. In !full_search case, don't
9018 (ada_lookup_symbol_list): Delete arg full_search, all callers
9019 updated. Call ada_lookup_symbol_list_worker.
9020 (ada_iterate_over_symbols): Call ada_lookup_symbol_list_worker.
9021 * ada-lang.h (ada_lookup_symbol_list): Update.
9022 * language.h (language_defn): Update comment for
9023 la_iterate_over_symbols.
9024 * linespec.c (iterate_over_file_blocks): New function.
9025 (iterate_over_all_matching_symtabs): Call it.
9026 (lookup_prefix_sym): Ditto.
9027 (get_current_search_block): New function.
9028 (get_search_block): Delete.
9029 (find_label_symbols): Call get_current_search_block.
9030 (add_matching_symbols_to_info): Call iterate_over_file_blocks.
9031 * symtab.c (iterate_over_symbols): Don't search superblocks.
9033 2013-03-05 Yao Qi <yao@codesourcery.com>
9035 * cli/cli-decode.c (add_setshow_zuinteger_unlimited_cmd): Change
9036 parameter VAR's type from "unsigned int" to "int".
9037 * command.h (var_zuinteger_unlimited): Update its comments.
9038 (add_setshow_zuinteger_unlimited_cmd): Update the declaration.
9040 2013-03-05 Corinna Vinschen <vinschen@redhat.de>
9042 * NEWS: Mention new target x86_64-*-cygwin*.
9044 2013-03-05 Corinna Vinschen <vinschen@redhat.de>
9046 * configure.host: Add x86_64-*-cygwin* as host.
9047 * configure.tgt: Add x86_64-*-cygwin* as target.
9048 * config/i386/cygwin64.mh: New file.
9050 2013-03-04 Jan Kratochvil <jan.kratochvil@redhat.com>
9052 * linespec.c (decode_line_2): Fix duplicate request off by two message.
9054 2013-03-04 Jan Kratochvil <jan.kratochvil@redhat.com>
9056 * linespec.c (struct linespec_canonical_name): New.
9057 (struct linespec_state): Change canonical_names type to it.
9058 (add_sal_to_sals): Change variable canonical_name to canonical. Change
9059 xrealloc element size. Initialize the different CANONICAL fields.
9060 (canonical_to_fullform): New.
9061 (filter_results): Use it. Add variables canonical, fullform and
9063 (struct decode_line_2_item, decode_line_2_compare_items): New.
9064 (decode_line_2): Remove variables iter and item_names, add variables
9065 items and items_count. Modify the code for these new variables.
9067 2013-03-04 Corinna Vinschen <vinschen@redhat.com>
9069 * coff-pe-read.c (read_pe_exported_syms): Don't return without
9072 2013-03-04 Luis Machado <lgustavo@codesourcery.com>
9074 * tracepoint.c (build_traceframe_info): Add code for byte order.
9076 2013-03-02 Kevin Buettner <kevinb@redhat.com>
9078 * v850-tdep.c: (v850e2_register_name): Revise system register
9079 names to match current V850E2M architecture specifications.
9080 Update register number enum comments too.
9082 2013-03-01 Jiong Wang <jiwang@tilera.com>
9083 Pedro Alves <palves@redhat.com>
9085 * tilegx-tdep.c (tilegx_analyze_prologue): Limit bundle reading
9087 (tilegx_skip_prologue): Limit prologue analysis to section end.
9089 2013-03-01 Jan Kratochvil <jan.kratochvil@redhat.com>
9091 * dwarf2loc.c (call_site_find_chain_1): New variable save_callee_pc,
9094 2013-03-01 Pedro Alves <palves@redhat.com>
9096 Use gdb_byte for bytes from the program being debugged.
9098 * arm-tdep.c (arm_store_return_value, arm_get_longjmp_target):
9099 Change type of local 'buf' to gdb_byte.
9100 * avr-tdep.c (avr_frame_prev_register, avr_push_dummy_call): Likewise.
9101 * bfin-tdep.c (bfin_push_dummy_call): Likewise.
9102 * cris-tdep.c (cris_sigcontext_addr)
9103 (cris_sigtramp_frame_unwind_cache): Likewise.
9104 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp)
9105 (frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
9107 * frv-tdep.c (frv_pseudo_register_write, frv_analyze_prologue): Likewise.
9108 * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer)
9109 (hppa32_hpux_search_dummy_call_sequence)
9110 (hppa_hpux_supply_save_state): Likewise.
9111 * hppa-linux-tdep.c (insns_match_pattern)
9112 (hppa_linux_find_global_pointer): Likewise.
9113 * hppa-tdep.c (hppa_in_function_epilogue_p)
9114 (skip_prologue_hard_way, hppa_frame_cache): Likewise.
9115 * i386-nto-tdep.c (i386nto_sigcontext_addr): Likewise.
9116 * i386fbsd-tdep.c (i386fbsd_supply_uthread)
9117 (i386fbsd_collect_uthread): Likewise.
9118 * ia64-hpux-tdep.c (ia64_hpux_push_dummy_code): Likewise.
9119 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Likewise.
9120 * ia64-tdep.c (examine_prologue, ia64_frame_cache)
9121 (ia64_frame_prev_register, ia64_sigtramp_frame_cache)
9122 (ia64_sigtramp_frame_prev_register, ia64_access_reg)
9123 (ia64_access_rse_reg, ia64_libunwind_frame_this_id)
9124 (ia64_libunwind_frame_prev_register)
9125 (ia64_libunwind_sigtramp_frame_this_id)
9126 (ia64_find_global_pointer_from_dynamic_section)
9127 (find_extant_func_descr, find_func_descr, ia64_dummy_id)
9128 (ia64_unwind_pc): Likewise.
9129 * iq2000-tdep.c (iq2000_store_return_value): Likewise.
9130 * m68hc11-tdep.c (m68hc11_push_dummy_call)
9131 (m68hc11_extract_return_value): Likewise.
9132 * m68klinux-nat.c (fetch_register, store_register): Likewise.
9133 * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_cr32_write)
9134 (mep_get_insn, mep_push_dummy_call): Likewise.
9135 * mips-linux-tdep.c (mips_linux_get_longjmp_target)
9136 (mips_linux_in_dynsym_stub): Likewise.
9137 * mn10300-tdep.c (mep_pseudo_cr32_write): Likewise.
9138 * ppc-linux-nat.c (fetch_register, store_register): Likewise.
9139 * regcache.c (dump_endian_bytes): Change type of parameter 'buf'
9141 * remote-mips.c (mips_set_register): Likewise.
9142 * remote-sim.c (gdbsim_fetch_register): Likewise.
9143 * score-tdep.c (score7_fetch_inst): Change type of parameter
9144 'memblock' and local 'buf' to gdb_byte.
9145 (score7_malloc_and_get_memblock): Change return type to gdb_byte.
9146 Change type of local 'buf' to gdb_byte. Adjust.
9147 (score7_adjust_memblock_ptr): Change type of parameter 'memblock'
9149 (score7_analyze_prologue): Change type of 'memblock' and
9150 'memblock_ptr' locals to gdb_byte*.
9151 * sh64-tdep.c (sh64_extract_return_value)
9152 (sh64_store_return_value): Change type of local 'buf' to gdb_byte.
9153 * solib-darwin.c (darwin_current_sos, darwin_read_exec_load_addr):
9154 * solib-pa64.c (pa64_solib_create_inferior_hook)
9155 (pa64_open_symbol_file_object): Remove local 'buf'.
9156 * solib-som.c (som_solib_create_inferior_hook, link_map_start)
9157 (som_open_symbol_file_object): Likewise.
9158 * solib-spu.c (spu_current_sos): Likewise.
9159 * spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
9160 * spu-multiarch.c (parse_spufs_run, spu_fetch_registers)
9161 (spu_store_registers): Likewise.
9162 * target.c (debug_print_register): Likewise.
9163 * tic6x-tdep.c (tic6x_get_longjmp_target): Likewise.
9164 * xstormy16-tdep.c (xstormy16_store_return_value)
9165 (xstormy16_push_dummy_call, xstormy16_resolve_jmp_table_entry)
9166 (xstormy16_find_jmp_table_entry): Likewise.
9168 2013-03-01 Jiong Wang <jiwang@tilera.com>
9170 * tilegx-tdep.c (tilegx_get_longjmp_target): New function.
9171 (tilegx_gdbarch_init): Install it.
9173 2013-02-28 Tom Tromey <tromey@redhat.com>
9175 * python/py-arch.c (archpy_disassemble): Use PyInt_Check and
9178 2013-02-28 Doug Evans <dje@google.com>
9180 * python/py-finishbreakpoint.c (bpfinishpy_init): gcc -Wall lint.
9181 * python/python.c (gdbpy_find_pc_line): Ditto.
9183 2013-02-28 Tom Tromey <tromey@redhat.com>
9185 * contrib/excheck.py: New file.
9186 * contrib/exsummary.py: New file.
9187 * contrib/gcc-with-excheck: New file.
9189 2013-02-28 Tom Tromey <tromey@redhat.com>
9191 * python/python.c (gdbpy_print_stack): Call begin_line and
9192 fprintf_filtered inside TRY_CATCH.
9194 2013-02-28 Tom Tromey <tromey@redhat.com>
9196 * python/python.c (gdbpy_find_pc_line): Call find_pc_line
9199 2013-02-28 Tom Tromey <tromey@redhat.com>
9201 * py-finishbreakpoint.c (bpfinishpy_init): Reorganize to call
9202 frame_object_to_frame_info inside TRY_CATCH.
9204 2013-02-28 Tom Tromey <tromey@redhat.com>
9206 * py-block.c (gdbpy_block_for_pc): Call block_for_pc inside
9209 2013-02-28 Tom Tromey <tromey@redhat.com>
9211 * objfiles.h (ALL_PSPACE_OBJFILES): Remove trailing backlash.
9213 2013-02-27 Corinna Vinschen <vinschen@redhat.com>
9215 * windows-nat.c: Throughout, fix format strings and casts of
9216 printf-like functions to avoid type related warnings on all
9218 (handle_output_debug_string): Fetch context information address
9219 from debug string using string_to_core_addr.
9221 2013-02-27 Jiong Wang <jiwang@tilera.com>
9223 * regformats/reg-tilegx.dat (name): Change abi name to "tilegx".
9224 * regformats/reg-tilegx32.dat: New.
9226 2013-02-27 Jiong Wang <jiwang@tilera.com>
9228 * configure.tgt (tilegx-*-linux*): Enable gdbserver.
9230 2013-02-27 Jiong Wang <jiwang@tilera.com>
9232 * configure.tgt (tilegx-*-linux*): Replace whitespace with tab.
9234 2013-02-27 Yao Qi <yao@codesourcery.com>
9235 Pedro Alves <palves@redhat.com>
9237 * tracepoint.c (tfile_trace_find): For tfind
9238 pc/tp/range/outside, look for the next trace frame instead of
9239 always starting from frame 0.
9241 2013-02-26 Anthony Green <green@moxielogic.com>
9243 * configure.tgt: Add support for moxie-*-rtems* target.
9245 2013-02-25 Pedro Alves <palves@redhat.com>
9247 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Change
9250 2013-02-24 Maciej W. Rozycki <macro@codesourcery.com>
9252 * mips-tdep.c (mips32_scan_prologue): Reset frame_offset to zero
9253 if $fp is used as the virtual frame pointer.
9255 2013-02-23 Alan Modra <amodra@gmail.com>
9257 * elfread.c (elf_symtab_read): Do not use udata.p here to find
9259 * ppc64-tdep.c (ppc64_elf_make_msymbol_special): New function.
9260 * ppc64-tdep.h (ppc64_elf_make_msymbol_special): Declare.
9261 * ppc-linux-tdep.c (ppc_linux_init_abi): Set up to use the above.
9262 * ppcfbsd-tdep.c (ppcfbsd_init_abi): Likewise.
9264 2013-02-22 Jan Kratochvil <jan.kratochvil@redhat.com>
9267 * elfread.c (build_id_bfd_get): Make the return type const.
9268 (build_id_verify): Make the check parameter const.
9269 (build_id_to_debug_filename): Make the build_id parameter and variable
9271 (find_separate_debug_file_by_buildid): Make the variable build_id const.
9273 2013-02-21 Alan Modra <amodra@gmail.com>
9275 * elfread.c (build_id_bfd_get): Adjust for elf_tdata changes.
9277 2013-02-20 Siva Chandra Reddy <sivachandra@google.com>
9279 Add a new method 'disassemble' to gdb.Architecture class.
9280 * python/py-arch.c (archpy_disassmble): Implementation of the
9281 new method gdb.Architecture.disassemble.
9282 (arch_object_methods): Add entry for the new method.
9284 2013-02-20 Jiong Wang <jiwang@tilera.com>
9286 * MAINTAINERS (Write After Approval): Add myself to the list.
9288 2013-02-19 Pedro Alves <palves@redhat.com>
9290 Garbage collect 'struct monitor_ops'::load_routine.
9292 * monitor.h (struct monitor_ops) <load_routine>: Remove field.
9293 * monitor.c (monitor_load): No longer call
9294 current_monitor->load_routine.
9295 * dbug-rom.c (init_dbug_cmds): Don't set 'load_routine'.
9296 * m32r-rom.c (init_m32r_cmds): Don't set 'load_routine'.
9297 * ppcbug-rom.c (init_ppc_cmds): Don't set 'load_routine'.
9299 2013-02-19 Pedro Alves <palves@redhat.com>
9303 Harmonize with generic_load.
9305 * monitor.c: Include "readline/readline.h".
9306 (monitor_load): Rename parameter 'file' to 'args'. Use build_argv
9307 instead of sscanf. Use CORE_ADDR/strtoulst instead of unsigned
9308 long/strtol for the 'load_offset' local. Error out if no argument
9309 is given or if too many arguments are given. Tilde expand the
9310 passed in file name.
9312 2013-02-19 Kai Tietz <ktietz@redhat.com>
9315 * symfile.c (load_section_data): Change type of load_offset
9317 (generic_load): User strtoulst instead of strtoul for conversion
9320 2013-02-19 Jiong Wang <jiwang@tilera.com>
9322 * tilegx-tdep.c (tilegx_analyze_prologue): add check for
9323 for return address, "lr" register, saved on stack.
9324 * tilegx-tdep.c (tilegx_frame_cache): update "PC" reg
9325 after we invoke tilegx_analyze_prologue.
9327 2013-02-19 Jiong Wang <jiwang@tilera.com>
9329 * tilegx-tdep.c (itilegx_gdbarch_init): char type should be signed.
9331 2013-02-19 Jiong Wang <jiwang@tilera.com>
9333 * tilegx-tdep.c (tilegx_skip_prologue): Use skip_prologue_using_sal.
9335 2013-02-19 Jiong Wang <jiwang@tilera.com>
9337 * tilegx-tdep.c (INT_SWINT_1_SIGRETURN): New macro.
9338 (tilegx_write_pc): New function.
9339 (tilegx_cannot_reference_register): Return zero if REGNO
9340 is TILEGX_FAULTNUM_REGNUM.
9341 (tilegx_gdbarch_init): Add call to set_gdbarch_write_pc.
9342 (tilegx_register_name): Add handling of "faultnum" register.
9343 * tilegx-tdep.h (enum tilegx_regnum): Add TILEGX_FAULTNUM_REGNUM.
9344 * tilegx-linux-tdep.c (tilegx_linux_supply_regset): Add
9345 handling of TILEGX_FAULTNUM_REGNUM.
9346 * tilegx-linux-nat.c (regmap): Add entry for TILEGX_FAULTNUM_REGNUM.
9348 2013-02-19 Jiong Wang <jiwang@tilera.com>
9350 * tilegx-tdep.c (tilegx_push_dummy_call): args pushed on stack
9351 should be aligned to 64bit.
9353 2013-02-19 Kai Tietz <ktietz@redhat.com>
9355 * windows-nat.c (windows_xfer_memory): Fix debug-output
9358 2013-02-19 Lei Liu <lei.liu2@windriver.com>
9360 * mips-linux-nat.c (mips64_linux_regsets_store_registers):
9361 Don't check DSP register number if HAVE_DSP is not set.
9363 2013-02-19 Alan Modra <amodra@gmail.com>
9365 * elfread.c (struct build_id): Delete. Use struct elf_build_id
9366 throughout file instead.
9367 (build_id_bfd_get): Update to use new elf_tdata build_id field.
9368 Don't xmalloc return value.
9369 (build_id_verify): Similarly. Don't xfree.
9370 (build_id_to_debug_filename): Update.
9371 (find_separate_debug_file_by_buildid): Update, don't xfree.
9373 2013-02-18 Tom Tromey <tromey@redhat.com>
9376 * dwarf2read.c (read_subrange_type): Use result of
9379 2013-02-16 Yuanhui Zhang <asmwarrior@gmail.com>
9381 * frame.c: Remove one extra white space after #include
9384 2013-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
9386 * contrib/cc-with-tweaks.sh: Extend the comment for -p option.
9388 2013-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
9390 * gdb-gdb.gdb.in: Wrap set complaints, b internal_error, b info_command
9391 and dir commands into an if block.
9393 2013-02-15 Sanimir Agovic <sanimir.agovic@intel.com>
9395 * python/py-breakpoint (struct pybp_code): Use int instead of
9398 2013-02-15 Pedro Alves <pedro@codesourcery.com>
9399 Hafiz Abid Qadeer <abidh@codesourcery.com>
9401 * NEWS: Mention new field "trace-file".
9402 * tracepoint.c (trace_status_mi): Output "trace-file" field.
9403 (tfile_open): Record the trace file's filename in the trace
9405 (tfile_files_info): Mention the name of the trace file.
9406 Check the "filename" field explicitely.
9407 (trace_status_command): Explicitely check "filename" field.
9408 (trace_find_command): Ditto.
9409 (trace_find_pc_command): Ditto.
9410 (trace_find_tracepoint_command): Ditto.
9411 (trace_find_line_command): Ditto.
9412 (trace_find_range_command): Ditto.
9413 (trace_find_outside_command): Ditto.
9414 * tracepoint.h (struct trace_status) <from_file>: Rename it
9415 to "filename" and make it hold the trace file's filename
9416 instead of a boolean.
9417 * remote.c (remote_get_trace_status): Initialize "filename"
9418 field with NULL instead of 0.
9420 2013-02-15 Yao Qi <yao@codesourcery.com>
9422 * remote.c: Fix a typo.
9424 2013-02-14 Pierre Muller <muller@sourceware.org>
9426 * contrib/ari/gdb_ari.sh (GNU/Linux rule): Remove.
9428 2013-02-14 Pedro Alves <palves@redhat.com>
9430 * utils.c (savestring): Don't #undef it. Move function to
9431 common/common-utils.c.
9432 * common/common-utils.c: Include gdb_string.h.
9433 (savestring): Move here from utils.c.
9434 * common/common-utils.h (savestring): Declare.
9436 2013-02-14 Pedro Alves <palves@redhat.com>
9438 * utils.c (savestring): Rename parameter 'size' to 'len'.
9440 2013-02-14 Pedro Alves <palves@redhat.com>
9441 Yufeng Zhang <yufeng.zhang@arm.com>
9443 * aarch64-linux-nat.c (aarch64_init_debug_reg_state): Delete.
9444 (aarch64_inferior_data, struct aarch64_inferior_data):
9446 (struct aarch64_process_info): New.
9447 (aarch64_process_list): New global.
9448 (aarch64_find_process_pid, aarch64_add_process)
9449 (aarch64_process_info_get): New functions.
9450 (aarch64_inferior_data_get): Delete.
9451 (aarch64_process_info_get): New function.
9452 (aarch64_forget_process): New function.
9453 (aarch64_get_debug_reg_state): New parameter 'pid'. Reimplement.
9454 (aarch64_linux_prepare_to_resume): Pass the lwp's pid to
9455 aarch64_get_debug_reg_state.
9456 (aarch64_notify_debug_reg_change): Use iterate_over_lwps
9457 instead of linux_nat_iterate_watchpoint_lwps.
9458 (aarch64_linux_new_fork): New function.
9459 (aarch64_linux_child_post_startup_inferior): Use
9460 aarch64_forget_process instead of aarch64_init_debug_reg_state.
9461 (aarch64_handle_breakpoint, aarch64_linux_insert_hw_breakpoint)
9462 (aarch64_linux_remove_hw_breakpoint)
9463 (aarch64_handle_aligned_watchpoint)
9464 (aarch64_handle_unaligned_watchpoint)
9465 (aarch64_linux_insert_watchpoint)
9466 (aarch64_linux_remove_watchpoint)
9467 (aarch64_linux_stopped_data_address): Adjust to pass the current
9468 process id to aarch64_debug_reg_state.
9469 (_initialize_aarch64_linux_nat): Install aarch64_linux_new_fork as
9470 linux_nat_new_fork hook, and aarch64_forget_process as
9471 linux_nat_forget_process hook; remove the call to
9472 register_inferior_data_with_cleanup.
9474 2013-02-14 Pedro Alves <palves@redhat.com>
9476 * eval.c (evaluate_subexp_for_address) <default_case_after_eval,
9477 EVAL_AVOID_SIDE_EFFECTS>: Swap and handle TYPE_CODE_REF before
9480 2013-02-14 Pedro Alves <pedro@codesourcery.com>
9481 Hafiz Abid Qadeer <abidh@codesourcery.com>
9483 * tracepoint.h (validate_trace_state_variable_name): Declare.
9484 * tracepoint.c (validate_trace_state_variable_name): New.
9485 (trace_variable_command): Parse the trace state variable's name
9486 without using parse_expression. Do several validations.
9487 * mi/mi-main.c (mi_cmd_trace_define_variable): Don't parse the
9488 trace state variable's name with parse_expression. Validate it.
9490 2013-02-14 Yao Qi <yao@codesourcery.com>
9492 * infcmd.c (breakpoint_proceeded): Remove it.
9494 2013-02-14 Yao Qi <yao@codesourcery.com>
9496 * tracepoint.c (end_actions_pseudocommand): Make it static.
9497 (while_stepping_pseudocommand): Likewise.
9498 * tracepoint.h (end_actions_pseudocommand): Remove the
9500 (while_stepping_pseudocommand): Likewise.
9502 2013-02-14 Yao Qi <yao@codesourcery.com>
9504 * cli/cli-decode.c (help_cmd): Remove the declaration of
9506 (help_all): Likewise.
9508 2013-02-13 Pedro Alves <palves@redhat.com>
9510 * amd64-linux-nat.c (update_debug_registers_callback):
9512 (amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use
9514 (amd64_linux_prepare_to_resume): Pass the lwp's pid to
9515 i386_debug_reg_state.
9516 (amd64_linux_new_fork): New function.
9517 (_initialize_amd64_linux_nat): Install amd64_linux_new_fork as
9518 linux_nat_new_fork hook, and i386_forget_process as
9519 linux_nat_forget_process hook.
9520 * i386-linux-nat.c (update_debug_registers_callback):
9522 (i386_linux_dr_set_control, i386_linux_dr_set_addr): Use
9524 (i386_linux_prepare_to_resume): Pass the lwp's pid to
9525 i386_debug_reg_state.
9526 (i386_linux_new_fork): New function.
9527 (_initialize_i386_linux_nat): Install i386_linux_new_fork as
9528 linux_nat_new_fork hook, and i386_forget_process as
9529 linux_nat_forget_process hook.
9530 * i386-nat.c (i386_init_dregs): Delete.
9531 (i386_inferior_data, struct i386_inferior_data):
9533 (struct i386_process_info): New.
9534 (i386_process_list): New global.
9535 (i386_find_process_pid, i386_add_process, i386_process_info_get):
9537 (i386_inferior_data_get): Delete.
9538 (i386_process_info_get): New function.
9539 (i386_debug_reg_state): New parameter 'pid'. Reimplement.
9540 (i386_forget_process): New function.
9541 (i386_cleanup_dregs): Rewrite.
9542 (i386_update_inferior_debug_regs, i386_insert_watchpoint)
9543 (i386_remove_watchpoint, i386_region_ok_for_watchpoint)
9544 (i386_stopped_data_address, i386_insert_hw_breakpoint)
9545 (i386_remove_hw_breakpoint): Adjust to pass the current process id
9546 to i386_debug_reg_state.
9547 (i386_use_watchpoints): Don't register inferior data.
9548 * i386-nat.h (i386_debug_reg_state): Add new 'pid' parameter, and
9550 (i386_forget_process): Declare.
9551 * linux-fork.c (delete_fork): Call linux_nat_forget_process.
9552 * linux-nat.c (linux_nat_new_fork, linux_nat_forget_process_hook):
9554 (linux_child_follow_fork): Don't call linux_nat_new_thread here.
9555 (add_initial_lwp): New, factored out from ...
9556 (add_lwp): ... this. Don't check the number of lwps before
9557 calling linux_nat_new_thread.
9558 (linux_nat_iterate_watchpoint_lwps): Delete.
9559 (linux_nat_attach): Use add_initial_lwp instead of add_lwp.
9560 (linux_handle_extended_wait): Call the linux_nat_new_fork hook on
9562 (linux_nat_wait_1): Use add_initial_lwp instead of add_lwp for the
9564 (linux_nat_kill, linux_nat_mourn_inferior): Call
9565 linux_nat_forget_process.
9566 (linux_nat_set_new_fork, linux_nat_set_forget_process)
9567 (linux_nat_forget_process): New functions.
9568 * linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): Delete
9570 (linux_nat_iterate_watchpoint_lwps): Delete declaration.
9571 (linux_nat_new_fork_ftype, linux_nat_forget_process_ftype): New
9573 (linux_nat_set_new_fork, linux_nat_set_forget_process)
9574 (linux_nat_forget_process): New declarations.
9576 * amd64fbsd-nat.c (super_mourn_inferior): New global.
9577 (amd64fbsd_mourn_inferior): New function.
9578 (_initialize_amd64fbsd_nat): Override to_mourn_inferior.
9579 * windows-nat.c (windows_detach): Call i386_cleanup_dregs.
9581 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
9583 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity):
9586 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
9588 * aarch64-linux-nat.c (debug_reg_change_callback)
9589 (aarch64_linux_get_debug_reg_capacity): ARI fix: Replace %llx with
9592 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
9594 * aarch64-linux-nat.c (dr_changed_t): ARI fix: Replace long long
9597 2013-02-13 Pedro Alves <palves@redhat.com>
9598 Hafiz Abid Qadeer <abidh@codesourcery.com>
9600 * c-lang.c (c_op_print_tab): Add entry for UNOP_PLUS.
9602 2013-02-12 Tom Tromey <tromey@redhat.com>
9605 * c-exp.y (lex_one_token): Initialize other fields of yylval on
9607 (classify_inner_name): Remove 'first_name' argument, add
9608 'context'. Remove unused variable.
9609 (yylex): Explicitly maintain the context type. Exit loop earlier
9610 if NAME result is seen.
9612 2013-02-12 Pedro Alves <palves@redhat.com>
9614 * amd64-darwin-tdep.c: Add (C) after Copyright.
9615 * cli/cli-cmds.h: Ditto.
9616 * cli/cli-decode.c: Ditto.
9617 * cli/cli-decode.h: Ditto.
9618 * cli/cli-dump.c: Ditto.
9619 * cli/cli-dump.h: Ditto.
9620 * cli/cli-interp.c: Ditto.
9621 * cli/cli-logging.c: Ditto.
9622 * cli/cli-script.c: Ditto.
9623 * cli/cli-script.h: Ditto.
9624 * cli/cli-setshow.c: Ditto.
9625 * cli/cli-setshow.h: Ditto.
9626 * cli/cli-utils.c: Ditto.
9627 * cli/cli-utils.h: Ditto.
9628 * config/alpha/nm-osf3.h: Ditto.
9629 * config/djgpp/djconfig.sh: Ditto.
9630 * config/i386/nm-fbsd.h: Ditto.
9631 * config/i386/nm-i386gnu.h: Ditto.
9632 * config/nm-linux.h: Ditto.
9633 * config/nm-nto.h: Ditto.
9634 * config/rs6000/nm-rs6000.h: Ditto.
9635 * config/sparc/nm-sol2.h: Ditto.
9636 * darwin-nat-info.c: Ditto.
9639 * gdb-demangle.h: Ditto.
9640 * i386-darwin-nat.c: Ditto.
9641 * i386-darwin-tdep.c: Ditto.
9642 * linux-fork.h: Ditto.
9643 * m32c-tdep.c: Ditto.
9644 * microblaze-linux-tdep.c: Ditto.
9645 * microblaze-rom.c: Ditto.
9646 * microblaze-tdep.c: Ditto.
9647 * microblaze-tdep.h: Ditto.
9648 * mips-linux-tdep.h: Ditto.
9649 * ppc-ravenscar-thread.c: Ditto.
9650 * ppc-ravenscar-thread.h: Ditto.
9651 * prologue-value.c: Ditto.
9652 * prologue-value.h: Ditto.
9653 * ravenscar-thread.c: Ditto.
9654 * ravenscar-thread.h: Ditto.
9655 * sparc-ravenscar-thread.c: Ditto.
9656 * sparc-ravenscar-thread.h: Ditto.
9657 * tilegx-linux-tdep.c: Ditto.
9658 * unwind_stop_reasons.def: Ditto.
9659 * windows-nat.h: Ditto.
9660 * xtensa-linux-tdep.c: Ditto.
9661 * xtensa-xtregs.c: Ditto.
9662 * regformats/regdat.sh: Ditto.
9663 * regformats/regdef.h: Ditto.
9665 2013-02-12 Pedro Alves <palves@redhat.com>
9667 * break-catch-sig.c: Update copyright years.
9669 2013-02-11 Siva Chandra Reddy <sivachandra@google.com>
9671 Add support for a destructor for ui_out data and use it to
9672 provide a ui_out destructor.
9673 * ui-out.h: Declare the new ui_out destructor.
9674 (ui_out_impl): Add a field for data destructor in ui_out_impl.
9675 * ui-out.c (default_data_destroy): Add a default data destructor
9677 (default_ui_out_impl): Set the new data_destroy field to
9678 default_data_destroy
9679 (uo_data_destroy): Local function which invokes the data
9680 destructor if present.
9681 (clear_table): Local function which clears the table data of a
9683 (ui_out_destroy): Public function which frees a ui_out object.
9684 (ui_out_table_end): Use the new clear_table function.
9685 * cli-out.c (cli_ui_out_impl): Set the new data_destroy field to
9687 * mi/mi-out.c (mi_ui_out_impl): Set the new data_destroy field
9690 2013-02-11 Doug Evans <dje@google.com>
9692 * printcmd.c (printf_c_string,printf_wide_c_string): New functions.
9693 (printf_decfloat): New function. Broken out from ui_printf.
9694 Remove unnecessary code to shift the entire format string down.
9695 (printf_pointer): New function.
9696 (ui_printf): Code to print C strings, wide C strings, decfloats,
9697 and pointers moved to separate functions.
9699 2013-02-11 Sergio Durigan Junior <sergiodj@redhat.com>
9701 * valops.c (value_assign): Handling bitfield offset in
9702 `lval_internalvar_component' case.
9704 2013-02-08 Doug Evans <dje@google.com>
9706 * common/format.c (parse_format_string): Fix whitespace.
9708 2013-02-08 Matthew Gretton-Dann <matthew.gretton-dann@linaro.org>
9710 * stack.c (return_command): Work around uninitialized variable
9713 2013-02-08 Yufeng Zhang <yufeng.zhang@arm.com>
9715 * aarch64-linux-tdep.c (AARCH64_LINUX_SIZEOF_GREGSET): Change the
9716 number of the registers from 36 to 34.
9718 2013-02-08 Marcus Shawcroft <marcus.shawcroft@arm.com>
9720 * NEWS: Mention new AArch64 native and target support.
9722 2013-02-08 Marcus Shawcroft <marcus.shawcroft@arm.com>
9724 * MAINTAINERS (Write After Approval): Add myself.
9726 2013-02-08 Jim MacArthur <jim.macarthur@arm.com>
9727 Marcus Shawcroft <marcus.shawcroft@arm.com>
9728 Nigel Stephens <nigel.stephens@arm.com>
9729 Yufeng Zhang <yufeng.zhang@arm.com>
9731 * aarch64-linux-nat.c: New file.
9732 * config/aarch64/linux.mh: New file.
9733 * configure.host: Add AArch64.
9734 * Makefile.in (ALLDEPFILES): Add aarch64-linux-nat.c.
9736 2013-02-07 Doug Evans <dje@google.com>
9738 * cli/cli-cmds.c (_initialize_cli_cmds): Clarify argument to
9739 disassemble command.
9741 2013-02-07 Marcus Shawcroft <marcus.shawcroft@arm.com>
9743 * aarch64-linux-tdep.c (aarch64_linux_init_abi): Call
9744 set_gdbarch_fetch_tls_load_module_address.
9746 2013-02-06 David S. Miller <davem@davemloft.net>
9748 * sparc-tdep.c (sparc32_return_value): Handle writing return value when
9749 using RETURN_VALUE_ABI_PRESERVES_ADDRESS.
9750 * value.c (struct_return_convention): New function.
9751 (using_struct_return): Implement in terms of struct_return_convention.
9752 * value.h (struct_return_convention): Declare.
9753 * stack.c (return_command): Allow successful overriding of the return
9754 value when RETURN_VALUE_ABI_PRESERVES_ADDRESS.
9756 2013-02-06 Tom Tromey <tromey@redhat.com>
9758 * python/py-type.c (typy_strip_typedefs): Don't call check_typedef
9759 outside of TRY_CATCH.
9761 2013-02-06 Yao Qi <yao@codesourcery.com>
9763 * mi/mi-interp.c: Include "tracepoint.h".
9764 (mi_tsv_modified): Declare.
9765 (mi_tsv_created, mi_tsv_deleted): Update declaration.
9766 (mi_interpreter_init): Call observer_attach_tsv_modified.
9767 (mi_tsv_modified): New.
9768 (mi_tsv_created, mi_tsv_deleted): Update.
9769 * tracepoint.c (trace_variable_command): Call
9770 observer_notify_tsv_modified if the initial value of tsv is
9772 (delete_trace_state_variable): Call
9773 observer_notify_tsv_deleted earlier.
9774 (trace_variable_command): Caller update.
9775 (create_tsv_from_upload): Likewise.
9776 * observer.sh: Declare "struct trace_state_variable".
9778 * NEWS: Mention the new MI notification "=tsv-modified".
9780 2013-02-05 Doug Evans <dje@google.com>
9782 * completer.c (location_completer): Fix typo in comment.
9784 2013-02-05 Jan Kratochvil <jan.kratochvil@redhat.com>
9786 * breakpoint.c (add_location_to_breakpoint): Insert the location with
9789 2013-02-05 Marcus Shawcroft <marcus.shawcroft@arm.com>
9791 * aarch64-tdep.c (aarch64_analyze_prologue): ARI fix:
9792 Refactor if statement to avoid trailing || operator.
9794 2013-02-05 Andreas Tobler <andreast@fgznet.ch>
9796 * NEWS: Add PowerPC FreeBSD as a new native configuration.
9798 2013-02-04 Andreas Tobler <andreast@fgznet.ch>
9800 * Makefile.in (ALL_TARGET_OBS): Add powerpc FreeBSD files.
9801 * configure.host: Add powerpc*-*-freebsd* target.
9802 * configure.tgt: Add target info for powerpc*-*-freebsd*.
9803 * ppcfbsd-nat.c, ppcfbsd-tdep.h, ppcfbsd-tdep.c: New files.
9804 * config/powerpc/fbsd.mh: New file.
9806 2013-02-04 Sergio Durigan Junior <sergiodj@redhat.com>
9807 Denys Vlasenko <dvlasenk@redhat.com>
9808 Pedro Alves <palves@redhat.com>
9810 * gdbarch.sh (elfcore_write_linux_prpsinfo): New F hook.
9811 (struct elf_internal_linux_prpsinfo): Forward declare.
9812 * gdbarch.h, gdbarch.c: Regenerate.
9813 * linux-tdep.c: Include `cli/cli-utils.h'.
9814 (linux_fill_prpsinfo): New function.
9815 (linux_make_corefile_notes): Use linux_fill_prpsinfo. If there's
9816 an elfcore_write_linux_prpsinfo hook, use it, otherwise, use
9817 elfcore_write_linux_prpsinfo32 or elfcore_write_linux_prpsinfo64
9818 depending on gdbarch pointer bitness.
9819 * ppc-linux-tdep.c: Include elf-bfd.h.
9820 (ppc_linux_init_abi): Hook in elfcore_write_ppc_linux_prpsinfo32
9823 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
9824 Marcus Shawcroft <marcus.shawcroft@arm.com>
9825 Nigel Stephens <nigel.stephens@arm.com>
9826 Yufeng Zhang <yufeng.zhang@arm.com>
9828 * configure.tgt (aarch64*-*-linux*): Set build_gdbserver=yes.
9830 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
9831 Marcus Shawcroft <marcus.shawcroft@arm.com>
9832 Nigel Stephens <nigel.stephens@arm.com>
9833 Yufeng Zhang <yufeng.zhang@arm.com>
9835 * aarch64-newlib-tdep.c: New file.
9836 * configure.tgt: Add aarch64-newlib-tdep.o to gdb_target_obs of
9838 * defs.h (enum gdb_osabi): Add GDB_OSABI_NEWLIB.
9839 * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-newlib-tdep.o.
9840 (ALLDEPFILES): Add aarch64-newlib-tdep.c.
9841 * osabi.c (gdb_osabi_names): Add "Newlib".
9843 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
9844 Marcus Shawcroft <marcus.shawcroft@arm.com>
9845 Nigel Stephens <nigel.stephens@arm.com>
9846 Yufeng Zhang <yufeng.zhang@arm.com>
9848 * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-linux-tdep.o.
9849 (ALLDEPFILES): Add aarch64-linux-tdep.c.
9850 * aarch64-linux-tdep.c: New file.
9851 * aarch64-linux-tdep.h: New file.
9852 * aarch64-tdep.h (gdbarch_tdep): Define gregset and fpregset.
9853 * configure.tgt: Add aarch64-none-linux-gnu.
9855 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
9856 Marcus Shawcroft <marcus.shawcroft@arm.com>
9857 Nigel Stephens <nigel.stephens@arm.com>
9858 Yufeng Zhang <yufeng.zhang@arm.com>
9860 * Makefile.in (ALL_64_TARGET_OBS): Add arch64-tdep.o.
9861 (HFILES_NO_SRCDIR): Add aarch64-tdep.h.
9862 (ALLDEPFILES): Add aarch64-tdep.c.
9863 * aarch64-tdep.c: New file.
9864 * aarch64-tdep.h: New file.
9865 * configure.tgt: Add AArch64.
9866 * features/Makefile (WHICH): Add aarch64 and aarch64-without-fpu.
9867 (aarch64-expedite): New definition.
9868 * features/aarch64-core.xml: New file.
9869 * features/aarch64-fpu.xml: New file.
9870 * features/aarch64-without-fpu.c: New file (generated).
9871 * features/aarch64-without-fpu.xml: New file.
9872 * features/aarch64.c: New file (generated).
9873 * features/aarch64.xml: New file.
9874 * regformats/aarch64-without-fpu.dat: New file (generated).
9875 * regformats/aarch64.dat: New file (generated).
9877 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
9879 * contrib/expect-read1.c: New file.
9880 * contrib/expect-read1.sh: New file.
9882 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
9884 * dwarf2read.c (file_file_name): New function with code from
9886 (file_full_name): Move most of the code to file_file_name.
9887 (macro_start_file): Rename variable full_name to file_name and use
9888 file_file_name for it. Add comp_dir parameter to new_macro_table.
9889 * macrocmd.c (show_pp_source_pos): New variable fullname. Replace any
9890 macro_source_file->filename access by macro_source_fullname call.
9891 * macroscope.c (_initialize_macroscope): Update the new_macro_table
9893 * macrotab.c (struct macro_table): New field comp_dir.
9894 (macro_include): New variables link_fullname and source_fullname.
9895 Replace any macro_source_file->filename access by macro_source_fullname
9897 (macro_lookup_inclusion): Remove the partial filenames checking code.
9898 (check_for_redefinition): New variables source_fullname and
9899 found_key_fullname. Replace any macro_source_file->filename access by
9900 macro_source_fullname call.
9901 (macro_undef): New variables source_fullname and key_fullname. Replace
9902 any macro_source_file->filename access by macro_source_fullname call.
9903 (macro_lookup_definition): New variables retval and source_fullname.
9904 Replace any macro_source_file->filename access by macro_source_fullname
9906 (foreach_macro): New variable key_fullname. Replace any
9907 macro_source_file->filename access by macro_source_fullname call.
9908 (foreach_macro_in_scope): New variable datum_fullname. Replace any
9909 macro_source_file->filename access by macro_source_fullname call.
9910 (new_macro_table): Add parameter comp_dir. Initialize T with it.
9911 (macro_source_fullname): New function.
9912 * macrotab.h (struct macro_source_file): Extent the filename field
9914 (new_macro_table): New parameter comp_dir, add a comment for it.
9915 (macro_source_fullname): new declaration.
9917 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
9919 * dwarf2read.c (dw2_map_symtabs_matching_filename): Move variable
9920 this_real_name to outer block. Use it also for
9921 compare_filenames_for_search.
9922 (dw2_expand_symtabs_matching): New variable this_real_name. Use it
9923 with dw2_get_real_path for file_matcher, considering also
9924 BASENAMES_MAY_DIFFER.
9925 (file_full_name): Prepend COMP_DIR even for relative lh->INCLUDE_DIRS.
9927 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
9929 * dwarf2read.c (dw2_expand_symtabs_matching): Add basenames parameter
9930 to the file_matcher parameter. Pass 0 to it.
9931 (dwarf2_create_include_psymtab): Copy also DIRNAME.
9932 * psymtab.c (partial_map_symtabs_matching_filename): Drop handling of
9933 NULL psymtab_to_fullname result.
9934 (psymtab_to_fullname): Remove variable r. Never return NULL, assemble
9935 an expected filename instead.
9936 (expand_symtabs_matching_via_partial): Add basenames parameter to the
9937 file_matcher parameter. Call also psymtab_to_fullname, after newly
9938 considering BASENAMES_MAY_DIFFER.
9939 * source.c (rewrite_source_path): Remove static.
9940 * source.h (rewrite_source_path): New declaration.
9941 * symfile.h (struct quick_symbol_functions): Add basenames parameter to
9942 the expand_symtabs_matching field. Comment it.
9943 * symtab.c (file_matches): New function comment. Add parameter
9944 basenames, implement it.
9945 (search_symbols_file_matches): Add basenames parameter. Update the
9946 file_matches caller.
9947 (search_symbols): Match FILES also against symtab_to_fullname.
9948 Optimize it for BASENAMES_MAY_DIFFER.
9950 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
9952 * source.c (print_source_lines_base): Print for TUI also "fullname".
9953 * tui/tui-data.c (init_content_element): Change tui_locator_element
9955 * tui/tui-data.h (struct tui_locator_element): Likewise.
9956 * tui/tui-disasm.c (tui_show_disassem_and_update_source): Rename
9957 tui_update_locator_filename calls to tui_update_locator_fullname.
9958 Replace symtab->filename refererence by symtab_to_fullname call.
9959 * tui/tui-out.c (tui_field_string): Check for "fullname" now.
9960 * tui/tui-source.c (tui_set_source_content): Change tui_locator_element
9961 field to full_name. Replace symtab->filename refererence by
9962 symtab_to_fullname call.
9963 (tui_show_symtab_source): Rename parameter to fullname. Change
9964 tui_locator_element field to full_name.
9965 * tui/tui-stack.c: Include source.h.
9966 (tui_set_locator_filename): Rename the declaration to ...
9967 (tui_set_locator_fullname): ... here. Rename its parameter to
9968 fullname, updates its comment.
9969 (tui_set_locator_info): Rename its parameter to fullname.
9970 (tui_set_locator_filename): Rename the definition to ...
9971 (tui_set_locator_fullname): ... here. Rename its parameter to
9972 fullname, updates its comment. Change tui_locator_element field to
9974 (tui_set_locator_info): Rename its parameter to fullname.
9975 (tui_set_locator_info): Rename callee to tui_set_locator_fullname.
9976 (tui_update_locator_filename): Rename to ...
9977 (tui_update_locator_fullname): ... here. Rename callee to
9978 tui_set_locator_fullname.
9979 (tui_show_frame_info): Replace symtab->filename refererence by
9980 symtab_to_fullname call.
9981 * tui/tui-stack.h (tui_update_locator_filename): Rename to ...
9982 (tui_update_locator_fullname): ... here.
9983 * tui/tui-winsource.c (tui_display_main): Rename the callee to
9984 tui_update_locator_fullname. Replace symtab->filename refererence by
9985 symtab_to_fullname call.
9986 * tui/tui.c (tui_show_source): Rename its parameter to fullname.
9987 Rename the callee to tui_update_locator_fullname.
9988 * tui/tui.h (tui_show_source): Rename its parameter to fullname.
9990 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
9992 * ada-lang.c (user_select_syms): Replace symtab->filename refererences
9993 by symtab_to_filename_for_display calls.
9994 * breakpoint.c (print_breakpoint_location, resolve_sal_pc): Likewise.
9995 (clear_command): New variable sal_fullname, initialize it. Replace
9996 compare_filenames_for_search by filename_cmp with sal_fullname.
9997 (say_where, update_static_tracepoint): Replace symtab->filename
9998 refererences by symtab_to_filename_for_display calls.
9999 * cli/cli-cmds.c (edit_command, list_command, ambiguous_line_spec):
10001 * dwarf2read.c: Include source.h.
10002 (fixup_go_packaging): Replace symtab->filename refererences by
10003 symtab_to_filename_for_display calls.
10004 * linespec.c (add_sal_to_sals): Rename variable filename to fullname.
10005 Replace symtab->filename refererences by symtab_to_filename_for_display
10007 (create_sals_line_offset, convert_linespec_to_sals): New variable
10008 fullname, initialize it, replace symtab->filename reference by the
10010 * linux-fork.c: Include source.h.
10011 (info_checkpoints_command): Replace symtab->filename refererences by
10012 symtab_to_filename_for_display calls.
10013 * macroscope.c (sal_macro_scope): Replace symtab->filename refererences
10014 by symtab_to_filename_for_display calls.
10015 * mdebugread.c: Include source.h.
10016 (psymtab_to_symtab_1): Replace symtab->filename refererences by
10017 symtab_to_filename_for_display calls.
10018 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
10019 (mi_cmd_file_list_exec_source_files): Likewise.
10020 * printcmd.c: Include source.h.
10021 (build_address_symbolic): Replace symtab->filename refererences by
10022 symtab_to_filename_for_display calls.
10023 * psymtab.c (partial_map_symtabs_matching_filename)
10024 (read_psymtabs_with_fullname): Call compare_filenames_for_search also
10025 with psymtab_to_fullname.
10026 * python/py-symtab.c (stpy_str): Replace symtab->filename refererences
10027 by symtab_to_filename_for_display calls.
10028 (stpy_get_filename): New variable filename, initialize it, use instead
10029 of symtab->filename refererences.
10030 (salpy_str): Make variable filename const char *. Replace
10031 symtab->filename refererences by symtab_to_filename_for_display calls.
10032 * skip.c: Include source.h and filenames.h.
10033 (skip_file_command): Remove const from the symtab variable. Replace
10034 symtab->filename refererences by symtab_to_fullname call.
10035 (function_name_is_marked_for_skip): New variables searched_for_fullname
10036 and fullname. Use them to search also with symtab's fullname.
10037 * source.c (find_source_lines): Replace symtab->filename refererences
10038 by symtab_to_filename_for_display calls.
10039 (print_source_lines_base): New variable filename, use it instead of
10040 symtab->filename. Replace symtab->filename refererences by
10041 symtab_to_filename_for_display calls.
10042 (line_info, forward_search_command): Replace symtab->filename
10043 refererences by symtab_to_filename_for_display calls.
10044 (reverse_search_command): Replace symtab->filename refererences by
10045 symtab_to_filename_for_display calls. New variable filename for it.
10046 * stack.c (frame_info): Likewise.
10047 * symmisc.c: Include source.h.
10048 (dump_objfile, dump_symtab_1, maintenance_print_symbols)
10049 (maintenance_info_symtabs): Replace symtab->filename refererences by
10050 symtab_to_filename_for_display calls.
10051 * symtab.c (iterate_over_some_symtabs): Call
10052 compare_filenames_for_search also with symtab_to_fullname.
10053 (lookup_symbol_aux_quick, basic_lookup_transparent_type_quick): Replace
10054 symtab->filename refererences by symtab_to_filename_for_display calls.
10055 (find_line_symtab): Replace symtab->filename refererences by
10056 symtab_to_filename_for_display calls.
10057 (file_matches): Replace filename_cmp by compare_filenames_for_search.
10058 (print_symbol_info): Make the last parameter const char *. New
10059 variable s_filename. Use it in the function.
10060 (symtab_symbol_info): Make the last_filename variable const char *.
10061 Replace symtab->filename refererences by symtab_to_filename_for_display
10063 (rbreak_command): New variable fullname. Use it. Replace
10064 symtab->filename refererence by symtab_to_filename_for_display call.
10065 * tracepoint.c (set_traceframe_context, trace_find_line_command)
10066 (print_one_static_tracepoint_marker): Replace symtab->filename
10067 refererences by symtab_to_filename_for_display calls.
10068 * tui/tui-source.c (tui_set_source_content): New variables filename and
10069 s_filename. Replace symtab->filename refererences by this variable.
10070 Replace other symtab->filename refererences by
10071 symtab_to_filename_for_display calls.
10073 2013-02-03 Eldar Gaynetdinov <hal9000ed2k@gmail.com>
10074 Jan Kratochvil <jan.kratochvil@redhat.com>
10076 Add a new variable that controls a way in which filenames are
10078 * NEWS (set filename-display): New entry.
10079 * source.c (filename_display_basename, filename_display_relative)
10080 (filename_display_absolute, filename_display_kind_names)
10081 (filename_display_string, show_filename_display_string)
10082 (symtab_to_filename_for_display): New.
10083 (_initialize_source): Added initialization of 'filename-display'
10085 * source.h (symtab_to_filename_for_display): Added declaration.
10086 * stack.c (print_frame): Added new variable and calling of a new
10087 function and condition with this variable. Changed third argument of
10088 calling of a function.
10090 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10092 * tui/tui-data.c (init_win_info, tui_del_window, tui_free_window):
10093 Rename field reference filename to fullname.
10094 * tui/tui-data.h (struct tui_source_info): Rename field filename to
10095 fullname. New comment for it.
10096 * tui/tui-source.c (tui_set_source_content): Rename field reference
10097 filename to fullname. Initialize field by symtab_to_fullname now.
10098 * tui/tui-winsource.c (tui_update_breakpoint_info): Rename field
10099 reference filename to fullname. Use symtab_to_fullname during
10102 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10105 * dwarf2read.c (dw2_expand_symtabs_with_filename): Rename to ...
10106 (dw2_expand_symtabs_with_fullname): ... here. Rename parameter
10107 filename to fullname. Rename variable this_name to this_fullname.
10108 Lowercase FILENAME_CMP call.
10109 (dw2_find_symbol_file): New comment for the returned string.
10110 (dwarf2_gdb_index_functions): Rename the function to
10111 dw2_expand_symtabs_with_fullname.
10112 * psymtab.c (read_psymtabs_with_filename): Rename to ...
10113 (read_psymtabs_with_fullname): ... here. Rename parameter filename to
10115 (psym_functions): Rename the function to read_psymtabs_with_fullname.
10116 * symfile.h (struct quick_symbol_functions): Rename field
10117 expand_symtabs_with_filename to expand_symtabs_with_fullname and its
10118 parameter filename to fullname. Document returned string meaning for
10120 * symtab.c (find_line_symtab): Rename the called function to
10121 expand_symtabs_with_fullname.
10123 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10126 * breakpoint.c (clear_command): Remove variable is_abs, unify the
10127 call of filename_cmp with compare_filenames_for_search.
10128 * dwarf2read.c (dw2_map_symtabs_matching_filename): Remove variable
10129 is_abs, unify the call of FILENAME_CMP with
10130 compare_filenames_for_search. New gdb_asserts for real_path and name.
10131 Unify the call of compare_filenames_for_search with FILENAME_CMP.
10132 * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
10133 * symfile.h (struct quick_symbol_functions): Extend the comment for
10134 map_symtabs_matching_filename.
10135 * symtab.c (compare_filenames_for_search): Remove the function comment
10136 relative path requirement. Handle absolute filenames, with a comment.
10137 (iterate_over_some_symtabs): Remove variable is_abs, unify the call of
10138 FILENAME_CMP with compare_filenames_for_search. New gdb_asserts for
10139 real_path and name. Unify the call of compare_filenames_for_search
10141 (iterate_over_symtabs): New gdb_assert on REAL_PATH.
10143 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10146 * breakpoint.c (print_breakpoint_location): Replace bp_location field
10147 source_file references by symtab field references. Remove variables
10149 (momentary_breakpoint_from_master, add_location_to_breakpoint):
10150 (clear_command, say_where): Replace bp_location field source_file
10151 references by symtab field references.
10152 (bp_location_dtor): Remove the source_file reference.
10153 (update_static_tracepoint): Replace bp_location field source_file
10154 references by symtab field references.
10155 (breakpoint_free_objfile): New function.
10156 * breakpoint.h (struct bp_location): Extend the comment for line_number.
10157 Replace the field source_file by field symtab, extend its comment.
10158 (breakpoint_free_objfile): New declaration.
10159 * objfiles.c (free_objfile): Call breakpoint_free_objfile.
10160 * tui/tui-winsource.c (tui_update_breakpoint_info): Replace bp_location
10161 field source_file references by symtab field references.
10163 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10165 Replace xfullpath calls by gdb_realpath calls.
10166 * cli/cli-cmds.c (find_and_open_script): Remove xfullpath from the
10168 * dwarf2read.c (dw2_map_expand_apply): Remove parameter full_path.
10169 Remove it from the iterate_over_some_symtabs call.
10170 (dw2_map_symtabs_matching_filename): Remove parameter full_path.
10171 Remove it from the dw2_map_expand_apply calls, remove a block handling
10173 * psymtab.c (partial_map_expand_apply): Remove parameter full_path.
10174 Remove it from the iterate_over_some_symtabs call.
10175 (partial_map_symtabs_matching_filename): Remove parameter full_path.
10176 Remove it from the partial_map_expand_apply calls, remove a block
10177 handling it. Drop gdb_realpath call and cleanups from the real_path
10179 * source.c (openp): Drop the comment part about xfullpath. Replace
10180 xfullpath calls by gdb_realpath calls.
10181 (find_and_open_source): Replace xfullpath call by gdb_realpath call.
10182 * symfile.h (struct quick_symbol_functions): Remove parameter full_path
10183 from method map_symtabs_matching_filename and its comment.
10184 * symmisc.c (maintenance_print_msymbols): Replace xfullpath call by
10186 * symtab.c (iterate_over_some_symtabs): Remove parameter full_path,
10187 remove it also from the function comment, remove a block handling it.
10188 Drop gdb_realpath call and cleanups from the real_path handling.
10189 (iterate_over_symtabs): Drop variable full_path and its use.
10190 * symtab.h (iterate_over_some_symtabs): Remove parameter full_path.
10191 * utils.c (xfullpath): Remove.
10192 * utils.h (xfullpath): Remove.
10194 2013-02-01 Andreas Tobler <andreast@fgznet.ch>
10196 * Makefile.in (ALL_TARGET_OBS): Add ppc64-tdep.o.
10197 (HFILES_NO_SRCDIR): Add ppc64-tdep.h.
10198 (ALLDEPFILES): Add ppc64-tdep.c.
10199 * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
10200 ppc64-tdep.o to gdb_target_obs.
10201 * ppc64-tdep.h: New file.
10202 * ppc64-tdep.c: New file.
10203 (insn_d, insn_ds, insn_xfx, ppc64_desc_entry_point): Move from
10204 ppc-linux-tdep.c to here.
10205 (PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN)
10206 (PPC64_STANDARD_LINKAGE2_LEN): Likewise and use ARRAY_SIZE macro.
10207 (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target)
10208 (ppc64_standard_linkage3_target, ppc64_skip_trampoline_code): Move
10209 from ppc-linux-tdep.c to here.
10210 (ppc64_convert_from_func_ptr_addr): Rename from
10211 ppc64_linux_convert_from_func_ptr_addr to
10212 ppc64_convert_from_func_ptr_addr and move from ppc-linux-tdep.c to
10215 (read_insn): Move from ppc-linux-tdep.c to here.
10216 (insns_match_pattern, insn_d_field, insn_ds_field): Move
10217 from ppc-linux-tdep.c to here and rename them with the ppc_ prefix.
10218 * ppc-linux-tdep.c: Include ppc64-tdep.h.
10219 Removed above functions.
10220 (ppc_linux_init_abi): Adjust.
10222 2013-02-01 Aleksandar Ristovski <aristovski@qnx.com>
10224 * ada-valprint.c (ada_print_floating): Remove unused 'len'.
10226 2013-02-01 Aleksandar Ristovski <aristovski@qnx.com>
10228 * ada-lang.c (assign_aggregate): Remove unused 'is_array_aggregate'.
10230 2013-02-01 Pedro Alves <palves@redhat.com>
10232 * dummy-frame.c (deprecated_pc_in_call_dummy): Delete function.
10233 * frame.h (deprecated_pc_in_call_dummy): Delete declaration.
10235 2013-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
10237 * elfread.c (elf_symfile_read): Limit separate debug info additions to
10238 files with no separate debug info.
10239 * objfiles.c (add_separate_debug_objfile): Add gdb_assert calls.
10240 * symfile.c (read_symbols): Call find_separate_debug_file_in_section
10241 only for files with no separate debug info.
10243 2013-01-31 Tom Tromey <tromey@redhat.com>
10245 * jit.c (jit_program_space_data): Rename from jit_inferior_data;
10247 (struct jit_program_space_data): Rename from jit_inferior_data.
10249 (get_jit_program_space_data): Rename from get_jit_inferior_data.
10250 Change return type. Attach data to program space.
10251 (jit_program_space_data_cleanup): Rename from
10252 jit_inferior_data_cleanup; change argument type.
10253 (jit_read_descriptor): Change 'inf_data' argument to 'ps_data',
10255 (jit_register_code): Update.
10256 (jit_update_inferior_cache): Remove.
10257 (jit_breakpoint_deleted): Get jit data from the location's program
10259 (jit_breakpoint_re_set_internal): Rename 'inf_data' argument to
10260 'ps_data', change type.
10261 (jit_inferior_init, jit_breakpoint_re_set_internal)
10262 (jit_event_handler): Update.
10263 (free_objfile_data): Get data from objfile's program space.
10264 (_initialize_jit): Update.
10266 2013-01-31 Tom Tromey <tromey@redhat.com>
10269 * jit.c (struct jit_inferior_data) <cached_code_address,
10270 jit_breakpoint>: New fields.
10271 (jit_breakpoint_re_set_internal): Fix logging. Only create
10272 breakpoint if cached address has changed.
10273 (jit_update_inferior_cache, jit_breakpoint_deleted): New
10275 (_initialize_jit): Register breakpoint deleted observer.
10277 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
10279 * infrun.c (handle_syscall_event): Remove unused gdbarch.
10280 (save_infcall_suspend_state): Ifdef out unused inf.
10281 (restore_infcall_suspend_state): Ifdef out unused inf.
10282 * jit.c (jit_register_code): Remove unused i, b, inf_data.
10283 (jit_frame_sniffer): Remove unused inf_data.
10285 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
10287 * c-exp.y (classify_inner_name): Remove unused type.
10288 * c-lang.c (c_printstr): Remove unused byte_order, i, things_printed,
10289 in_quotes, need_comma, wchar_buf, output, cleanup, iter, finished,
10291 (c_get_string): Remove unused kind.
10292 * c-typeprint.c (c_type_print_args): Remove unused i, len, args, table2.
10294 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
10296 * charset.c (intermediate_encoding): Remove unused i.
10297 * completer.c (signal_completer): Remove unused i.
10298 * continuations.c (discard_my_continuations_1): Remove unused
10300 * corelow.c (core_close): Remove unuseD name.
10301 (get_core_siginfo): Remove unused pid.
10302 * cp-namespace.c (cp_lookup_symbol_imports_or_template): Remove unused
10304 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Remove unused base_offset.
10305 (loclist_describe_location): Remove unused first.
10306 * event-top.c (command_line_handler): Remove unused got_eof.
10307 * exec.c (exec_close_1): Remove unused need_symtab_cleanup.
10308 (resize_section_table): Remove unused old_value.
10309 * gdb_bfd.c (gdb_bfd_map_section): Remove unused header.
10310 * gnu-v3-abi.c (compute_vtable_size): Remove unused addr.
10311 * i386-tdep.c (i386_process_record): Remove unused rex.
10312 * infcmd.c (get_return_value): Remove unused uiout.
10313 * jv-lang.c (type_from_class): Remove unused is_array.
10314 * jv-valprint.c (java_val_print): Remove unused i.
10315 * linux-nat.c (linux_nat_stop_lwp): Remove unused ptid.
10316 * linux-thread-db.c (thread_db_find_new_threads_2): Remove unuseD pid.
10317 * m2-typeprint.c (m2_print_type): Remove unused code.
10318 * macroexp.c (get_character_constant): Remove unused body_start.
10319 (macro_stringify): Remove unused result.
10320 * objc-lang.c (find_methods): Remove unused gdbarch.
10321 * objfiles.c (filter_overlapping_sections): Remove unused abfd1, abfd2.
10322 * regcache.c (regcache_cooked_read): Remove unused gdbarch.
10323 * stack.c (print_frame_args): Remove unused summary.
10324 * thread.c (thread_apply_command): Remove unused p.
10325 * valarith.c (value_x_unop): Remove unused mangle_ptr.
10326 * valops.c (search_struct_method): Remove unused skip.
10327 * valprint.c (generic_val_print): Remove unused byte_order.
10328 * varobj.c (varobj_update): Remove unused changed.
10329 * cli/cli-cmds.c (complete_command): Remove unused next_item.
10330 (alias_command): Remove unused c.
10331 * mi/mi-cmd-catch.c (mi_catch_load_unload): Remove unused c.
10332 * mi/mi-main.c (mi_cmd_data_write_register_values): Remove unused
10334 (mi_cmd_data_write_memory): Remove unused word_format.
10335 (mi_cmd_data_write_memory_bytes): Remove unused r.
10336 * python/py-gdb-readline.c (gdbpy_readline_wrapper): Remove unused
10338 * python/python.c (_initialize_python): Remove unused cmd_name, cmd.
10339 * tui/tui-disasm.c (tui_set_disassem_content): Remove unused
10342 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
10344 * dwarf2-frame.c (dwarf2_compile_cfa_to_ax): Remove unused num_regs.
10345 * symtab.c (iterate_over_symtabs): Remove unused s.
10346 (find_pc_sect_symtab): Remove unused pspAce.
10347 (find_pc_sect_line): Remove unused alt_symtab.
10348 (find_pcs_for_symtab_line): Remove unused ix, previous_function.
10349 (completion_list_add_name): Remove unused newsize.
10351 2013-01-31 Tom Tromey <tromey@redhat.com>
10354 * dwarf2read.c (read_tag_ptr_to_member_type): Handle
10357 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
10359 * target.c (target_read_string): Remove unused origlen.
10361 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
10363 * auto-load.c (auto_load_expand_dir_vars): Remove unused dir_vec.
10364 * ax-gdb.c (gen_printf): Remove unused expr, i, bot, fr, flen, fmt.
10365 * ax-general.c (ax_print): Remove unused is_float.
10366 * blockframe.c (block_innermost_frame): Remove unused start, end.
10367 * break-catch-sig.c (catch_signal_command): Remove unused gdbarch.
10369 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
10371 * solib-svr4.c (svr4_keep_data_in_core): Remove unused lmo.
10372 (svr4_read_so_list): Remove unused lmo.
10373 * solib-target.c (solib_target_relocate_section_addresses): Remove
10376 2013-01-30 Tom Tromey <tromey@redhat.com>
10378 * hppa-tdep.c (read_unwind_info): Use SECT_OFF_TEXT, not "0".
10380 2013-01-30 Tom Tromey <tromey@redhat.com>
10382 * symfile.c (get_file_crc): Use bfd_calc_gnu_debuglink_crc32.
10383 * utils.c (gnu_debuglink_crc32): Remove.
10384 * utils.h (gnu_debuglink_crc32): Don't declare.
10386 2013-01-30 Tom Tromey <tromey@redhat.com>
10388 * dwarf2read.c (compute_delayed_physnames, read_call_site_scope)
10389 (read_structure_type, read_enumeration_type): Remove cast.
10391 2013-01-30 Tom Tromey <tromey@redhat.com>
10393 * dwarf2read.c (read_namespace_type): Remove cast.
10394 (read_typedef): Likewise.
10396 2013-01-29 Tom Tromey <tromey@redhat.com>
10398 * dwarf2read.c (free_dwo_file): Remove assert.
10400 2013-01-29 Tom Tromey <tromey@redhat.com>
10402 * value.c (deprecated_set_value_modifiable): Remove.
10403 * value.h (deprecated_set_value_modifiable): Remove.
10405 2013-01-28 Doug Evans <dje@google.com>
10407 * dwarf2loc.c (dwarf2_find_location_expression): Don't add base address
10408 to addresses from dwo files.
10410 2013-01-25 Siva Chandra Reddy <sivachandra@google.com>
10412 * valops.c (find_overload_match): Remove unused argument 'lax'.
10413 * value.h: Remove unused argument 'lax' from the declaration of
10414 find_overload_match.
10415 * eval.c (value_subexp_standard): Do not pass a 'lax' argument
10416 to find_overload_match.
10417 * valarith.c (value_user_defined_cpp_op): Do not pass a 'lax'
10418 argument to find_overload_match.
10420 2013-01-25 Tom Tromey <tromey@redhat.com>
10422 * dwarf2read.c (processing_has_namespace_info): Remove.
10423 (struct dwarf2_cu) <processing_has_namespace_info>: New field.
10424 (process_die, read_func_scope, dwarf2_start_symtab)
10425 (new_symbol_full): Update.
10427 2013-01-25 Tom Tromey <tromey@redhat.com>
10429 * cp-namespace.c (cp_set_block_scope): Remove.
10430 * cp-support.h (cp_set_block_scope): Remove.
10431 * dbxread.c: Include block.h.
10432 (cp_set_block_scope): New function.
10433 (process_one_symbol): Update.
10434 * dwarf2read.c (read_func_scope): Use block_set_scope.
10436 2013-01-25 Pedro Alves <palves@redhat.com>
10438 * remote.c (add_current_inferior_and_thread): Tweak comment.
10440 2013-01-25 Tom Tromey <tromey@redhat.com>
10442 * cp-namespace.c (cp_scan_for_anonymous_namespaces): Update.
10443 (cp_add_using_directive): Add 'copy_names' argument.
10444 * cp-support.h (cp_add_using_directive): Update.
10445 (struct using_direct) <import_src, import_dest, alias,
10446 declaration>: Now const.
10447 * dwarf2read.c (read_import_statement): Use obconcat.
10448 Don't copy names passed to cp_add_using_directive.
10450 2013-01-25 Tom Tromey <tromey@redhat.com>
10452 * c-exp.y (qualified_name): Use TYPE_SAFE_NAME.
10454 2013-01-25 Pedro Alves <palves@redhat.com>
10456 * remote.c (stop_reply_extract_thread): New.
10457 (add_current_inferior_and_thread): New parameter 'wait_status'.
10459 (remote_start_remote): Pass wait status to
10460 add_current_inferior_and_thread.
10461 (extended_remote_run): Update comment.
10462 (extended_remote_create_inferior_1): Pass wait status to
10463 add_current_inferior_and_thread.
10465 2013-01-25 Andrew Burgess <aburgess@broadcom.com>
10466 Ulrich Weigand <uweigand@de.ibm.com>
10468 * valarith.c (value_vector_widen): New function for replicating a
10469 scalar into a vector.
10470 (value_binop): Use value_vector_widen to widen scalar to vector
10471 rather than casting, this better matches gcc C behaviour.
10472 * valops.c (value_casst): Update logic for casting between vector
10473 types, and for casting from scalar to vector, try to match gcc C
10475 * value.h (value_vector_widen): Declare.
10476 * opencl-lang.c (opencl_value_cast): New opencl specific casting
10477 function, handle special case for casting scalar to vector.
10478 (opencl_relop): Use opencl_value_cast.
10479 (evaluate_subexp_opencl): Use opencl_value_cast instead of
10480 value_cast, and handle BINOP_ASSIGN, UNOP_CAST, and UNOP_CAST_TYPE
10481 in order to use opencl_value_cast.
10483 2013-01-25 Yao Qi <yao@codesourcery.com>
10485 * event-loop.c: Include "queue.h".
10486 (gdb_event_p): New typedef.
10487 (DECLARE_QUEUE_P): Use.
10488 (DEFINE_QUEUE_P): Use.
10489 (async_queue_event): Remove.
10490 (gdb_event_xfree): New.
10491 (initialize_event_loop): New.
10492 (process_event): Use QUEUE macros.
10493 (event_queue): Remove.
10494 (gdb_wait_for_event): Caller update.
10495 (check_async_event_handlers): Likewise.
10496 (poll_timers): Likewise.
10497 * event-loop.h (initialize_event_loop): Declare.
10498 * event-loop.c (gdb_event_xfree): New.
10499 * top.c (gdb_init): Call initialize_event_loop.
10501 2013-01-25 Yao Qi <yao@codesourcery.com>
10503 * event-loop.c (async_queue_event): Remove one parameter
10504 'position'. Remove code handling 'position' == TAIL.
10505 (gdb_wait_for_event): Caller update.
10506 (check_async_event_handlers): Caller update.
10507 (poll_timers): Caller update.
10508 * event-loop.h (enum queue_position): Remove.
10510 2013-01-25 Maxim Kuvyrkov <maxim@kugelworks.com>
10512 * MAINTAINERS: Update my email.
10514 2013-01-25 Yao Qi <yao@codesourcery.com>
10516 * main.c (print_gdb_help): Remove "--epoch" from the help
10519 2013-01-24 Ulrich Weigand <uweigand@de.ibm.com>
10521 * symtab.c (skip_prologue_using_sal): Consider a file
10522 change the same as an increased line number
10524 2013-01-24 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
10526 * MAINTAINERS (Write After Approval): Add myself to the list.
10528 2013-01-24 Tom Tromey <tromey@redhat.com>
10530 * ada-lang.h (ada_decode_symbol): Make return type const.
10531 * ada-lang.c (ada_decode_symbol): Likewise.
10533 2013-01-23 Doug Evans <dje@google.com>
10535 * linespec.c (find_linespec_symbols): Make static.
10537 2013-01-23 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
10539 * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value): Set correct
10540 type on float conversion for complex type.
10542 2013-01-23 Siva Chandra Reddy <sivachandra@google.com>
10544 Add a new class gdb.Architecture which exposes GDB's
10545 internal representation of architecture via GDB Python API.
10546 * Makefile.in: Add entries corresponding to the new file
10548 * NEWS (Python Scripting): Add entries for the new class
10549 gdb.Architecture and the new method gdb.Frame.architecture.
10550 * python/py-arch.c: Implement gdb.Architecture class.
10551 * python/py-frame.c (frapy_arch): Implement the method
10552 gdb.Frame.architecture().
10553 (frame_object_methods): Add 'architecture' to the method table.
10554 * python/python-internal.h: Add declarations of new utility
10556 * python/python.c (_initialize_python): Initialize
10557 gdb.Architecture class.
10559 2013-01-23 Doug Evans <dje@google.com>
10561 Work around binutils/15021.
10562 * dwarf2read.c (dwarf2_per_cu_data): Split imported_symtabs and
10563 type_unit_group out of union s. All uses updated.
10564 (read_index_from_section): Watch for index version 8.
10565 (follow_die_sig): If using .gdb_index version <= 7, record the TU as
10566 an imported symtab.
10567 (write_psymtabs_to_index): Increment version number to 8.
10569 2013-01-22 Pedro Alves <palves@redhat.com>
10571 * annotate.c (breakpoint_changed): Skip if breakpoint is not
10574 2013-01-22 Pedro Alves <palves@redhat.com>
10576 * annotate.c (annotate_breakpoints_changed): Rename to ...
10577 (annotate_breakpoints_invalid): ... this. Make static.
10578 (breakpoint_changed): Adjust.
10579 (_initialize_annotate): Always install the observers. Install a
10580 "breakpoint_created" observer.
10581 * annotate.h (annotate_breakpoints_changed): Delete declaration.
10582 * breakpoint.c (set_breakpoint_condition)
10583 (breakpoint_set_commands, do_map_commands_command)
10584 (init_raw_breakpoint, clear_command, set_ignore_count)
10585 (enable_breakpoint_disp): No longer call
10586 annotate_breakpoints_changed.
10588 2013-01-22 Pedro Alves <palves@redhat.com>
10590 * annotate.c: Include "inferior.h".
10591 (frames_invalid_emitted)
10592 (breakpoints_invalid_emitted): New globals.
10593 (async_background_execution_p): New function.
10594 (annotate_breakpoints_changed, annotate_frames_invalid): Skip
10595 emitting the annotation if it has already been emitted.
10596 (annotate_display_prompt): New function.
10597 * annotate.h (annotate_display_prompt): New declaration.
10598 * event-top.c: Include annotate.h.
10599 (display_gdb_prompt): Call annotate_display_prompt.
10601 2013-01-22 Pedro Alves <palves@redhat.com>
10603 * annotate.c (ignore_count_changed): Delete.
10604 (annotate_breakpoints_changed): Don't clear ignore_count_changed.
10605 (annotate_ignore_count_change): Delete.
10606 (annotate_stopped): Don't emit a delayed breakpoints-changed
10608 * annotate.h (annotate_ignore_count_change): Delete.
10609 * breakpoint.c (bpstat_check_breakpoint_conditions): Don't call
10610 annotate_ignore_count_change.
10612 2013-01-22 Tom Tromey <tromey@redhat.com>
10614 * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>: Only
10615 require_rvalue for a register location.
10617 2013-01-21 Marc Khouzam <marc.khouzam@ericsson.com>
10619 * breakpoint.c (print_one_breakpoint_location): Add MI
10620 field 'thread-groups' when printing a breakpoint.
10621 (output_thread_groups): New function.
10623 2013-01-21 Siva Chandra Reddy <sivachandra@google.com>
10625 * python/lib/gdb/commands/explore.py
10626 (CompoundExplorer.explore_expr): Correct the name of a method
10628 (ExploreTypeCommand.invoke): Add a missing 'return'.
10630 2013-01-21 Tom Tromey <tromey@redhat.com>
10632 * gdb_obstack.h (obconcat): Move declaration here, from...
10633 * symfile.h (obconcat): ... here.
10634 * gdb_obstack.c: New file.
10635 (obconcat): Move from...
10636 * symfile.c (obconcat): ... here.
10637 * Makefile.in (SFILES): Add gdb_obstack.c.
10638 (COMMON_OBS): Add gdb_obstack.o.
10640 2013-01-21 Tom Tromey <tromey@redhat.com>
10642 * symfile.h (obsavestring): Don't declare.
10643 * symfile.c (obsavestring): Remove.
10644 * ada-exp.y: Use obstack_copy0, not obsavestring.
10645 * ada-lang.c: Use obstack_copy0, not obsavestring.
10646 * coffread.c: Use obstack_copy0, not obsavestring.
10647 * cp-namespace.c: Use obstack_copy0, not obsavestring.
10648 * dbxread.c: Use obstack_copy0, not obsavestring.
10649 * dwarf2read.c: Use obstack_copy0, not obsavestring.
10650 * jit.c: Use obstack_copy0, not obsavestring.
10651 * mdebugread.c: Use obstack_copy0, not obsavestring.
10652 * psymtab.c: Use obstack_copy0, not obsavestring.
10653 * stabsread.c: Use obstack_copy0, not obsavestring.
10654 * xcoffread.c: Use obstack_copy0, not obsavestring.
10656 2013-01-21 Tom Tromey <tromey@redhat.com>
10658 * dwarf2read.c (fixup_go_packaging): Save package name
10659 on objfile obstack.
10660 * gdbtypes.c (init_type): Don't copy name.
10662 2013-01-21 Tom Tromey <tromey@redhat.com>
10664 * dwarf2read.c (struct partial_die_info) <name, scope>: Now
10666 (struct attribute) <u.str>: Now const.
10667 (struct fnfieldlist) <name>: Now const.
10668 (dw2_get_file_names_reader, init_cutu_and_read_dies): Update.
10669 (partial_die_parent_scope): Make return type const.
10670 (partial_die_full_name, add_partial_symbol): Update.
10671 (dwarf2_compute_name, dwarf2_full_name, dwarf2_physname): Make
10673 (find_file_and_directory): Make 'name' and 'comp_dir' const.
10674 (read_file_scope, read_func_scope, dwarf2_add_field)
10675 (dwarf2_add_member_fn, read_structure_type)
10676 (process_enumeration_scope, read_array_type, read_module_type)
10677 (read_base_type, read_subrange_type): Update.
10678 (dwarf2_start_symtab): Make 'name' and 'comp_dir' const.
10679 (new_symbol_full, guess_full_die_structure_name): Update.
10680 (dwarf2_canonicalize_name): Return const type. Make 'name' const.
10681 (dwarf2_name): Return const type.
10682 (dwarf_decode_macro_bytes, dwarf_decode_macros): Make 'comp_dir'
10685 2013-01-21 Tom Tromey <tromey@redhat.com>
10687 * gdbtypes.c (init_type): Make 'name' const.
10688 * gdbtypes.h (init_type): Update.
10690 2013-01-21 Tom Tromey <tromey@redhat.com>
10692 * buildsym.c (patch_subfile_names): Use set_last_source_file.
10693 (start_symtab): Make 'name' and 'dirname' const. Use
10694 set_last_source_file.
10695 (restart_symtab, reset_symtab_globals): Use set_last_source_file.
10696 (last_source_file): Define. Now static.
10697 (set_last_source_file, get_last_source_file): New functions.
10698 * buildsym.h (last_source_file): Don't declare.
10699 (start_symtab): Update.
10700 (set_last_source_file, get_last_source_file): Declare.
10701 * coffread.c (complete_symtab): Use set_last_source_file.
10702 (coff_end_symtab): Likewise.
10703 (coff_symtab_read): Use set_last_source_file, get_last_source_file.
10704 * dbxread.c (read_dbx_symtab, read_ofile_symtab): Use
10705 set_last_source_file.
10706 (process_one_symbol): Use get_last_source_file.
10707 * mdebugread.c (parse_partial_symbols): Use set_last_source_file.
10708 (psymtab_to_symtab_1): Use get_last_source_file.
10709 * xcoffread.c (process_linenos): Use get_last_source_file.
10710 (complete_symtab): Use set_last_source_file.
10711 (read_xcoff_symtab): Use set_last_source_file, get_last_source_file.
10712 (scan_xcoff_symtab): Use set_last_source_file.
10714 2013-01-21 Tom Tromey <tromey@redhat.com>
10716 * symtab.c (struct demangled_name_entry) <mangled>: Now const.
10717 (symbol_set_names): Remove casts. Handle field const-ness.
10719 2013-01-21 Tom Tromey <tromey@redhat.com>
10721 * dwarf2read.c (new_symbol_full): Remove cast.
10722 * symtab.c (symbol_set_demangled_name): Make 'name' const.
10723 * symtab.h (symbol_set_demangled_name): Update.
10725 2013-01-21 Tom Tromey <tromey@redhat.com>
10727 * main.c (captured_main): Call bfd_init.
10729 2013-01-21 Tom Tromey <tromey@redhat.com>
10731 * gnu-v2-abi.c (_initialize_gnu_v2_abi): Don't set default ABI.
10732 * gnu-v3-abi.c (_initialize_gnu_v3_abi): Set default ABI.
10733 * minsyms.c (install_minimal_symbols): Don't check for _Z symbols.
10736 2013-01-21 Jan Kratochvil <jan.kratochvil@redhat.com>
10738 * symmisc.c (maintenance_print_msymbols): Check also ST_DEV.
10740 2013-01-21 Jan Kratochvil <jan.kratochvil@redhat.com>
10742 Fix gdb.fortran/common-block.exp crash in PIE mode.
10743 * dwarf2read.c (new_symbol_full) <DW_TAG_common_block>: Use
10745 * f-valprint.c (info_common_command_for_block): Expect
10746 LOC_COMMON_BLOCK in gdb_assert.
10747 * symtab.h (struct general_symbol_info): Update comment for the
10748 common_block member.
10749 (domain_enum): Extend comment for the COMMON_BLOCK_DOMAIN member.
10750 (enum address_class): New member LOC_COMMON_BLOCK.
10752 2013-01-18 David Blaikie <dblaikie@gmail.com>
10754 * MAINTAINERS (Write After Approval): Add "David Blaikie".
10756 2013-01-18 Tom Tromey <tromey@redhat.com>
10759 * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>:
10760 Call require_rvalue.
10762 2013-01-18 Yao Qi <yao@codesourcery.com>
10764 * dbxread.c (dbx_psymtab_to_symtab): Delete the declaration.
10765 (dbx_read_symtab): New declaration.
10766 (dbx_psymtab_to_symtab): Delete.
10767 (dbx_read_symtab): Rename from dbx_psymtab_to_symtab.
10768 Rename parameter PST to SELF. Exchanged two parameters.
10769 (start_psymtab): Caller update.
10770 * dwarf2read.c (dwarf2_psymtab_to_symtab): Delete the declaration.
10771 (dwarf2_read_symtab): New declaration.
10772 (dwarf2_psymtab_to_symtab): Delete.
10773 (dwarf2_read_symtab): Rename from dwarf2_psymtab_to_symtab.
10774 Rename parameter PST to SELF. Exchanged two parameters.
10775 (create_partial_symtab): Caller update.
10776 * mdebugread.c (mdebug_psymtab_to_symtab): Delete.
10777 (mdebug_read_symtab): Rename from mdebug_psymtab_to_symtab.
10778 Rename parameter PST to SELF. Exchanged two parameters.
10779 (parse_partial_symbols, new_psymtab): Caller update.
10780 * psympriv.h (struct partial_symtab) <read_symtab>: Exchange
10782 * psymtab.c (psymtab_to_symtab): Caller update.
10783 * xcoffread.c (xcoff_psymtab_to_symtab): Delete.
10784 (xcoff_read_symtab): Rename from xcoff_psymtab_to_symtab.
10785 Rename parameter PST to SELF. Exchanged two parameters.
10786 (xcoff_start_psymtab): Caller update.
10788 2013-01-18 Yao Qi <yao@codesourcery.com>
10790 * infrun.c (proceed): Rename local variable 'oneproc' to
10793 2013-01-17 Doug Evans <dje@google.com>
10795 * dwarf2read.c (dw2_build_type_unit_groups_reader): Delete.
10796 (dw2_build_type_unit_groups): Delete. All uses updated.
10798 * symtab.h (struct symbol_search): Add comment.
10800 2013-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
10802 * symtab.c (compare_filenames_for_search): New comment for
10805 2013-01-17 Tom Tromey <tromey@redhat.com>
10807 * cp-abi.c (cp_abi_completer): Fix typo in assignment.
10809 2013-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
10811 * symtab.c (iterate_over_some_symtabs): New variable cleanups,
10812 initialize it by existing make_cleanup. Call new do_cleanups.
10814 2013-01-17 Tom Tromey <tromey@redhat.com>
10816 * cp-abi.c (cp_abi_completer): New function.
10817 (_initialize_cp_abi): Set completer for "set cp-abi".
10819 2013-01-17 Tom Tromey <tromey@redhat.com>
10821 * mem-break.c: Remove obsolete comment.
10822 * bfin-tdep.c (bfin_breakpoint_from_pc): Fix comment.
10824 2012-01-17 Sanjoy Das <sanjoy@playingwithpointers.com>
10826 * jit.c (jit_reader_load_command): Interpret the jit reader name
10827 as an absolute path if it begins with a forward slash.
10829 2012-01-17 Sanjoy Das <sanjoy@playingwithpointers.com>
10833 * jit.c (finalize_symtab): Ensure that only the global block has a
10836 2013-01-17 Pedro Alves <palves@redhat.com>
10838 * acinclude.m4: Include ../config/plugins.m4,
10839 ../config/largefile.m4 and ../config/lead-dot.m4. Add comments.
10840 * Makefile.in (aclocal_m4_deps): Update.
10841 * aclocal.m4: Renegerate.
10843 2013-01-16 Doug Evans <dje@google.com>
10845 * contrib/cc-with-tweaks.sh: Add references to Fission docs.
10847 2013-01-16 Pedro Alves <palves@redhat.com>
10848 Tom Tromey <tromey@redhat.com>
10851 * NEWS: Add "catch signal".
10852 * breakpoint.c (base_breakpoint_ops): No longer static.
10853 (bpstat_explains_signal): New function.
10854 (init_catchpoint): No longer static.
10855 (base_breakpoint_explains_signal): New function.
10856 (base_breakpoint_ops): Initialize new field.
10857 * breakpoint.h (enum bpstat_signal_value): New.
10858 (struct breakpoint_ops) <explains_signal>: New field.
10859 (bpstat_explains_signal): Remove macro, declare as function.
10860 (base_breakpoint_ops, init_catchpoint): Declare.
10861 * break-catch-sig.c: New file.
10862 * inferior.h (signal_catch_update): Declare.
10863 * infrun.c (signal_catch): New global.
10864 (handle_syscall_event): Update for change to
10865 bpstat_explains_signal.
10866 (handle_inferior_event): Likewise. Always handle random signals
10868 (signal_cache_update): Check signal_catch.
10869 (signal_catch_update): New function.
10870 (_initialize_infrun): Initialize signal_catch.
10871 * Makefile.in (SFILES): Add break-catch-sig.c.
10872 (COMMON_OBS): Add break-catch-sig.o.
10874 2013-01-16 Tom Tromey <tromey@redhat.com>
10876 * breakpoint.c (print_one_catch_fork, print_one_catch_vfork)
10877 (print_one_catch_solib, print_one_catch_syscall)
10878 (print_one_catch_exec, print_one_exception_catchpoint): Emit
10881 2013-01-16 Yao Qi <yao@codesourcery.com>
10883 * printcmd.c (current_display_number): Make it static.
10885 2013-01-16 Yao Qi <yao@codesourcery.com>
10887 * infcmd.c (step_once): Don't check '!single_inst' as it was
10890 2013-01-15 Jan Kratochvil <jan.kratochvil@redhat.com>
10892 * dwarf2read.c (psymtab_include_file_name): Extend the function comment.
10894 2013-01-14 Tom Tromey <tromey@redhat.com>
10896 * cli/cli-decode.c (add_setshow_string_noescape_cmd): Return the
10898 * command.h (add_setshow_string_noescape_cmd): Update.
10899 * corefile.c (set_gnutarget_command): Remove trailing whitespace.
10900 (complete_set_gnutarget): New function.
10901 (_initialize_core): Set the "set gnutarget" completer.
10903 2013-01-14 Tom Tromey <tromey@redhat.com>
10906 * c-typeprint.c (cp_type_print_method_args): Handle 'restrict'.
10907 (c_type_print_modifier): Likewise.
10908 * dwarf2read.c (read_tag_restrict_type): New function.
10909 (read_type_die_1): Handle DW_TAG_restrict_type.
10910 * gdbtypes.c (make_restrict_type): New function.
10911 (recursive_dump_type): Handle TYPE_RESTRICT.
10912 * gdbtypes.h (enum type_flag_values): Renumber.
10913 (enum type_instance_flag_value): Add
10914 TYPE_INSTANCE_FLAG_RESTRICT.
10915 (TYPE_RESTRICT): New macro.
10916 (make_restrict_type): Declare.
10918 2013-01-14 Tom Tromey <tromey@redhat.com>
10921 * psymtab.c (struct psymtab_state): New.
10922 (discard_psymtabs_upto, make_cleanup_discard_psymtabs): New
10924 * psympriv.h (make_cleanup_discard_psymtabs): Declare.
10925 * dwarf2read.c (dwarf2_build_psymtabs): Catch exceptions.
10927 2013-01-14 Richard Sharman <richard_sharman@mitel.com>
10928 Pedro Alves <palves@redhat.com>
10932 * remote.c (remote_threads_info): Make a copy of the reply from
10933 qfThreadInfo and use that instead of rs->buf.
10935 2013-01-14 Yao Qi <yao@codesourcery.com>
10937 * dbxread.c (dbx_psymtab_to_symtab_1): Don't check PST is NULL.
10938 (dbx_psymtab_to_symtab): Likewise.
10939 * dwarf2read.c (dwarf2_psymtab_to_symtab): Likewise.
10940 * mdebugread.c (mdebug_psymtab_to_symtab): Likewise.
10941 * xcoffread.c (xcoff_psymtab_to_symtab_1): Likewise.
10943 2013-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
10945 * parse.c (parse_exp_in_context): New variable inner_chain. Call
10946 make_cleanup_restore_current_language. Call set_language. Move
10947 OLD_CHAIN and INNER_CHAIN cleanups.
10948 * utils.c (do_restore_current_language)
10949 (make_cleanup_restore_current_language): New functions.
10950 * utils.h (make_cleanup_restore_current_language): New declaration.
10952 2013-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
10954 * source.c (symtab_to_fullname): Apply rewrite_source_path also for
10955 non-existing files.
10957 * source.c (symtab_to_fullname): Do not prepend DIRNAME for
10958 non-existing files if FILENAME is already absolute.
10960 2013-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
10962 * macrocmd.c (macro_inform_no_debuginfo): Use puts_filtered instead of
10963 fputs_filtered. Append trailing newline.
10965 2013-01-11 Yao Qi <yao@codesourcery.com>
10966 Stan Shebs <stan@codesourcery.com>
10968 * psymtab.c (init_psymbol_list): Clarify the comment.
10970 2013-01-11 Yao Qi <yao@codesourcery.com>
10972 * breakpoint.c (print_one_breakpoint_location): Remove dead code.
10973 (update_dprintf_command_list): Assert that 'printf_line' is
10974 non-null. Remove condition check.
10976 2013-01-10 Jan Kratochvil <jan.kratochvil@redhat.com>
10979 * psymtab.c (psymtab_to_fullname, psymtab_to_fullname): Make the return
10981 * tui/tui-source.c (tui_source_is_displayed): Make the parameter fname
10983 * tui/tui-source.h (tui_source_is_displayed): Likewise.
10985 2013-01-09 Anthony Green <green@moxielogic.com>
10987 * cp-abi.c (cplus_print_vtable): Don't return value from void
10989 * ada-lang.c (re_set_catch_assert): Ditto.
10991 2013-01-09 Doug Evans <dje@google.com>
10993 * symfile.h (quick_symbol_functions): Delete member
10994 pre_expand_symtabs_matching. All uses removed.
10995 * dwarf2read.c (dw2_lookup_symbol): Implement.
10996 (dw2_do_expand_symtabs_matching): Delete.
10997 (dw2_pre_expand_symtabs_matching): Delete.
10998 (struct dw2_symtab_iterator): New type.
10999 (dw2_symtab_iter_init, dw2_symtab_iter_next): New functions.
11000 (dw2_expand_symtabs_for_function): Rewrite.
11001 (dwarf2_gdb_index_functions): Update.
11002 * psymtab.c (pre_expand_symtabs_matching_psymtabs): Delete.
11003 (psym_functions): Update.
11005 2013-01-09 Tom Tromey <tromey@redhat.com>
11007 * config/pa/hpux.mh (NATDEPFILES): Remove somread.o.
11008 * configure: Rebuild.
11009 * configure.ac: Add somread.o to the build if BFD has SOM
11011 * somread.c: Include som/aout.h, not syms.h.
11012 (som_symtab_read): Use som_external_symbol_dictionary_record.
11013 Unpack records manually.
11014 (_initialize_somread): Declare.
11016 2012-01-08 Mike Frysinger <vapier@gentoo.org>
11018 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx) [__x86_64__]:
11019 Cast return_address to 64bits.
11021 2013-01-08 Hui Zhu <hui_zhu@mentor.com>
11023 * printcmd.c: Remove define of function output_command.
11024 * tracepoint.c: Remove extern of function output_command.
11025 * valprint.h: (output_command): New extern.
11027 2013-01-07 Tom Tromey <tromey@redhat.com>
11029 * objc-lang.c (objc_emit_char, objc_printchar, objc_printstr):
11031 (objc_language_defn): Use c_printchar, c_printstr,
11034 2013-01-07 Tom Tromey <tromey@redhat.com>
11038 * ada-valprint.c (printstr, print_field_values): Remove
11040 * cp-valprint.c (cp_print_value_fields): Remove "inspect_it"
11042 * jv-valprint.c (java_print_value_fields): Remove "inspect_it"
11044 * m2-lang.c (m2_printstr): Remove "inspect_it" code.
11045 * main.c (captured_main): Remove "epoch" argument.
11046 * objc-lang.c (objc_printstr): Remove "inspect_it" code.
11047 * p-lang.c (pascal_printstr): Remove "inspect_it" code.
11048 * p-valprint.c (pascal_object_print_value_fields): Remove
11050 * printcmd.c (print_command_1): Remove 'inspect' argument.
11051 (print_command, call_command): Update.
11052 (inspect_command): Remove.
11053 (_initialize_printcmd): Make "inspect" an alias for "print".
11054 * top.c (epoch_interface): Remove.
11055 * top.h (epoch_interface): Remove.
11056 * valprint.c (user_print_options): Update.
11057 (print_converted_chars_to_obstack): Remove "inspect_it" code.
11058 * valprint.h (struct value_print_options) <inspect_it>: Remove
11061 2013-01-04 Tom Tromey <tromey@redhat.com>
11063 * valprint.h (read_string): Add 'extern'.
11065 2013-01-07 Joel Brobecker <brobecker@adacore.com>
11067 * darwin-nat.c: Fix typo in TASK_DYLD_INFO_COUNT macro test
11068 used to decide whether to define darwin_read_dyld_info or not.
11070 2013-01-03 Pierre Muller <muller@sourceware.org>
11072 * main.c (relocate_gdb_directory): Avoid calling stat function
11075 2013-01-03 Yao Qi <yao@codesourcery.com>
11077 * psymtab.c (fixup_psymbol_section): Update declaration.
11078 (fixup_psymbol_section): Remove code returning value.
11080 2013-01-03 Yao Qi <yao@codesourcery.com>
11082 * symtab.h: Remove some out of date comments.
11083 (enum exception_event_kind): Move it ...
11084 * breakpoint.c: ... here.
11086 2013-01-02 Iain Sandoe <developer@sandoe-acoustics.co.uk>
11089 * darwin-nat.c (darwin_read_dyld_info): Only build if
11090 TASK_DYLD_INFO_COUNT is defined.
11091 (darwin_xfer_partial): Call darwin_read_dyld_info only if
11092 TASK_DYLD_INFO_COUNT is defined.
11094 2013-01-02 Tom Tromey <tromey@redhat.com>
11096 * symfile.h (struct ecoff_debug_hack): Remove.
11097 * objfiles.c: Don't include mdebugread.h.
11099 2013-01-02 Tom Tromey <tromey@redhat.com>
11101 * config/i386/darwin.mh (NATDEPFILES): Remove machoread.o.
11102 * configure.ac: Check for Mach-O support in BFD. Update
11104 * configure: Rebuild.
11106 2013-01-02 Tom Tromey <tromey@redhat.com>
11108 * acinclude.m4 (GDB_AC_CHECK_BFD): New macro.
11109 * configure.ac: Use GDB_AC_CHECK_BFD.
11110 * configure: Rebuild.
11112 2013-01-01 Maxim Kuvyrkov <maxim.kuvyrkov@gmail.com>
11114 * MAINTAINERS: Update my email.
11116 2013-01-01 Joel Brobecker <brobecker@adacore.com>
11118 * cli/cli-script.h (make_cleanup_free_command_lines): Make extern.
11120 2013-01-01 Joel Brobecker <brobecker@adacore.com>
11122 * rs6000-nat.c (bss_data_overlap): New function.
11123 (vmap_symtab): Use it to adjust the .bss section's offset.
11125 2013-01-01 Joel Brobecker <brobecker@adacore.com>
11127 Update year range in copyright notice of all files.
11129 2013-01-01, 13 Joel Brobecker <brobecker@adacore.com>
11131 * top.c (print_gdb_version): Update copyright year.
11133 For older changes see ChangeLog-2012.
11139 version-control: never