Fix typo in sign extension code in dwarf2_const_value_data().
[external/binutils.git] / gdb / ChangeLog
1 2000-05-12  Kevin Buettner  <kevinb@redhat.com>
2
3         * dwarf2read.c (dwarf2_const_value_data): Fix typo in sign
4         extension code.
5
6 Fri May 12 20:38:55 2000  Andrew Cagney  <cagney@b1.cygnus.com>
7
8         * TODO: Mention weak symbol problem.  Mention UnixWare thread
9         problem.
10
11 Fri May 12 14:12:17 2000  Andrew Cagney  <cagney@b1.cygnus.com>
12
13         * README: Update section on kernel debugging.
14
15 Fri May 12 19:13:15 2000  Andrew Cagney  <cagney@b1.cygnus.com>
16
17         * mips-tdep.c (mips_get_saved_register): New function.  Handle
18         case of 32 ABI saving 32 bit registers on stack when target has 64
19         bit ISA.
20         (mips_gdbarch_init): Update.
21
22 Fri May 12 14:46:52 2000  Andrew Cagney  <cagney@b1.cygnus.com>
23
24         * mips-tdep.c (MIPS_EABI): Fix typo.  Test for MIPS_ABI_EABI64.
25
26 Thu May 11 21:52:55 2000  Andrew Cagney  <cagney@b1.cygnus.com>
27
28         * configure.in (WERROR_CFLAGS): Check that GCC accepts a -W
29         options before using them. Report result.
30         * configure: Regenerate.
31         
32 2000-05-11  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
33
34         * coffread.c (coff_symtab_read): In the case of C_THUMBEXT |
35         C_THUMBEXTFUNC | C_EXT, sec will never ever be the index for
36         .rodata, because cs_to_section doesn't deal with .rodata. Fix test
37         accordingly.
38
39 Thu May 11 21:33:59 2000  Andrew Cagney  <cagney@b1.cygnus.com>
40
41         * gdbarch.sh (gdbarch_dump): Print the value of GDB_MULTI_ARCH.
42         Always check that a macro is defined before printing it.
43         * gdbarch.c: Re-generate.
44
45 Thu May 11 17:22:36 2000  Andrew Cagney  <cagney@b1.cygnus.com>
46
47         * README: Update for GDB 5.0.
48
49 Thu May 11 13:24:52 2000  Andrew Cagney  <cagney@b1.cygnus.com>
50
51         * mips-tdep.c (MIPS_DEFAULT_STACK_ARGSIZE): Fix typo.
52
53         * config/mips/tm-irix5.h (GDB_MULTI_ARCH): Add
54         definition. Disable.  Document known problems.
55         (MIPS_DEFAULT_ABI): Define.
56
57         * mips-tdep.c (enum mips_abi): Define.
58         (struct gdbarch_tdep): Replace mips_eabi with mips_abi.
59         (MIPS_EABI): Update.
60         (mips_gdbarch_init): Add preliminary support for IRIX N32 ABI.
61         Determine ABI from either ELF_FLAGS or MIPS_DEFAULT_ABI. When
62         looking for a matching architecture require a matching MIPS_ABI.
63         (mips_gdbarch_init): Cleanup arch_debug information.
64
65 2000-05-10  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
66
67         * solib.c (symbol_add_stub): Remember the index and the name of
68         the section with the lowest address. Use this data (instead of
69         data from .text) to pass info into symbol_file_add.
70
71         * elfread.c (record_minimal_symbol_and_info): Use the section 
72         where the symbol lives to get the index, instead of guessing.
73
74 2000-05-10  Michael Snyder  <msnyder@seadog.cygnus.com>
75
76         Make Sparc a Multi-Arch target.  Discard PARAMS macro (require ANSI).
77         * sparc-tdep.c: include arch-utils.h.
78         (SPARC_HAS_FPU, FP_REGISTER_BYTES, FP_MAX_REG NUM, SPARC_INTREG_SIZE,
79         DUMMY_REG_SAVE_OFFSET): provide multi-arch-compatible definitions.
80         (GDB_TARGET_IS_SPARC64): make into a runtime test.
81         (struct frame_extra_info): Define, use instead of the macro.
82         (Many places): Use alloca instead of statically allocated buffers
83         that depend on a multi-arch variable such as MAX_REGISTER_RAW_SIZE.
84         (sparc_extract_struct_value_address): Accept a pointer arg instead
85         of an array sized by REGISTER_BYTES.
86         (examine_prologue): Accept a pointer to an array of CORE_ADDR, 
87         instead of the defunct struct frame_saved_regs.  Recognize new
88         Sparc64 store instructions as part of the prologue.  Ignore the
89         destination of a frame store when parsing the prologue (so long
90         as it's on the stack).
91         (sparc_push_dummy_frame): Fix incorrect buffer offset for PSTATE.
92         (sparc_frame_find_saved_regs): Accept a ptr to an array of CORE_ADDR
93         instead of the defunct struct frame_saved_regs.
94         (supply_gregset): Discard unnecessary 'zerobuf': just send NULL to
95         supply_register.  Provide 4-byte offset to compensate for diff
96         between size of the prgreg_t elements on a 64-bit host and size
97         of the registers for a 32-bit target.  Fill all inaccessible regs
98         with zero so they won't keep being requested again and again.
99         (fill_gregset): Handle 32/64 size difference between registers
100         and prgreg_t.  Handle as many new 64-bit regs as possible.
101         (supply_fpregset, fill_fpregset): Attempt to handle 64-bit world.
102         (sparc_push_arguments): Rename to sparc32_push_arguments.
103         Copy arguments into registers as well as onto stack, so that the
104         CALL_DUMMY (code pushed onto the target stack) is not required.
105         (sparc_extract_return_value): Rename to sparc32_extract_return_value.
106         (sparc_store_return_value): Use memset instead of bzero.
107         Use write_register_gen instead of write_register_bytes.
108         (sparclet_store_return_value): New function.
109         (_initialize_sparc_tdep): Call register_gdbarch_init to activate
110         the gdbarch multi-architecture system.
111         (sp64_push_arguments): Rename to sparc64_push_arguments.
112         Extend to store arguments in general registers as well as on stack.
113         (sparc64_extract_return_value): Rename to sp64_extract_return_value.
114         Use as a private function, to be called by the new external function
115         sparc64_extract_return_value.
116         (sparclet_extract_return_value): New function.
117         (sparc32_stack_align, sparc64_stack_align, sparc32_register_name,
118         sparc64_register_name, sparc_print_extra_frame_info,
119         sparclite_register_name, sparclet_register_name, 
120         sparc_push_return_address, sparc64_use_struct_convention, 
121         sparc32_store_struct_return, sparc64_store_struct_return, 
122         sparc32_register_virtual_type, sparc64_register_virtual_type, 
123         sparc32_register_size, sparc64_register_size, 
124         sparc32_register_byte, sparc64_register_byte, 
125         sparc_gdbarch_skip_prologue, sparc_convert_to_virtual, 
126         sparc_convert_to_raw, sparc_frame_init_saved_regs, 
127         sparc_frame_address, sparc_gdbarch_fix_call_dummy, 
128         sparc_coerce_float_to_double, sparc_call_dummy_address, 
129         sparc_y_regnum, sparc_reg_struct_has_addr, sparc_intreg_size,
130         sparc_return_value_on_stack): New functions supporting multi-arch.
131         (sparc_gdbarch_init): New function; initialize multi-arch.
132         (struct gdbarch_tdep): Define, use for private multi-arch data.
133         * config/sparc/tm-sparc.h: Move definitions around, enclose with
134         #ifdef GDB_MULTI_ARCH tests, provide some multi-arch alternate
135         definitions.  Add enums for register names, to help debugging gdb.
136         This header file must work for non-multi-arch and for multi-arch.
137         * config/sparc/tm-sp64.h: Add GDB_MULTI_ARCH configuration.  Also add
138         AT_ENTRY_POINT definitions for CALL_DUMMY, for non-multi-arch case.
139         Define GDB_MULTI_ARCH.
140         * config/sparc/tm-sparclet.h: Add GDB_MULTI_ARCH configuration.
141         Do not define GDB_MULTI_ARCH (bfd does not correctly identify target).
142         * config/sparc/tm-sparclite.h: Ditto.
143         * config/sparc/tm-sun4sol2.h: Define GDB_MULTI_ARCH.
144         * sparclet-rom.c (sparclet_regnames): Initialize explicitly, to
145         avoid using deprecated REGISTER_NAMES macro.
146         * Makefile.in: Let sparc-tdep.c depend on arch-utils.h.
147
148 2000-05-08  Michael Snyder  <msnyder@seadog.cygnus.com>
149
150         * gdbarch.sh: Add FP0_REGNUM to list of multi-arched register numbers.
151         * gdbarch.c, gdbarch.h: Regenerate.
152         * core-regset.c: Change FP0_REGNUM to a runtime test.
153         * procfs.c: Ditto.
154         * sun3-nat.c: Ditto.
155         * sparc-tdep.c: Ditto.
156         
157         * i386mach-nat.c: Remove unnecessary ifdef for FP0_REGNUM.
158         * ptx4-nat.c: Ditto.
159
160         * sol-thread.c (sol_thread_create_inferior): only add the thread
161         to the thread list if it is not already in there.
162         (prototypes for thread_db func ptrs): pretty up formatting.
163
164 2000-05-08  Eli Zaretskii  <eliz@is.elta.co.il>
165
166         * config/djgpp/djconfig.sh: Use more warning switches.
167
168         * config/djgpp/fnchange.lst: Replace the leading gdb-0222 with the
169         @V@ placebo.  djunpack.bat changed accordingly.
170
171 Mon May  8 11:19:47 2000  Andrew Cagney  <cagney@b1.cygnus.com>
172
173         * mips-tdep.c (size_auto, size_32, size_64, size_enums): Rename
174         saved_gpreg_size_auto, saved_gpreg_size_32, saved_gpreg_size_64
175         and saved_gpreg_size_enums.
176         (mips_stack_argsize): Update. Cleanup.
177
178         * mips-tdep.c (STACK_ARGSIZE): Delete macro.  Replaced by
179         MIPS_STACK_ARGSIZE.
180         (MIPS_NABI32): Delete macro. Replaced by
181         MIPS_REGS_HAVE_STACK_HOME_P.
182         (mips_push_arguments): Update.
183         (mips_push_arguments): Replace check for MIPS_EABI or MIPS_NABI32
184         with test for MIPS_REGS_HAVE_STACK_HOME_P.
185         (MIPS_REGS_HAVE_STACK_HOME_P): Define.  Provide non- multi-arch
186         default.
187         (struct gdbarch_tdep): Add mips_regs_have_stack_home_p and
188         mips_default_stack_argsize.
189         (MIPS_STACK_ARGSIZE): Define as mips_stack_argsize.
190         (mips_stack_argsize_string): New static variable.
191         (mips_stack_argsize): New function, handle default case.
192         (__initialize_mips_tdep): Add command ``set mips stack-arg-size''
193         implemented as an enum using size_auto et.al.
194         (mips_gdbarch_init): Initialize mips_default_stack_argsize and
195         mips_regs_have_stack_home_p.
196
197         * config/mips/tm-irix5.h (MIPS_DEFAULT_SAVED_REGSIZE): Define as 8
198         for n32.
199         (MIPS_REGS_HAVE_STACK_HOME_P): Define as 0 for n32.
200
201 Mon May  8 00:49:32 2000  Andrew Cagney  <cagney@b1.cygnus.com>
202
203         * procfs.c (PROCFS_TRACE): Delete definition.
204         * proc-utils.h (PROCFS_NOTE, PROC_PRETTYFPRINT_STATUS): Always
205         define.
206
207 2000-05-05  Michael Snyder  <msnyder@seadog.cygnus.com>
208
209         * procfs.c: Cleanup of procfs tracing.  Move defines and 
210         prototypes to proc-utils.h
211         * proc-utils.h: Define tracing macros.  Declare trace functions.
212         * proc-api.c: Make procfs tracing a runtime option.
213         (prepare_to_trace): New function, abstracted out of several
214         places.  Open a trace file if one is required.
215         (ioctl_with_trace, write_with_trace, open_with_trace, 
216         close_with_trace, wait_with_trace, lseek_with_trace):
217         Report errno if an error occurs in a system call.
218         (write_with_trace): Make 2nd arg void *, to agree with write.
219
220 2000-05-05  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
221
222         * elfread.c (elf_symtab_read): The calculation of 'offset' 
223         must be done for each symbol, not just once. The index 
224         used must be the index of the section where 'sym' resides,
225         not .text.
226
227 2000-05-05  Michael Snyder  <msnyder@seadog.cygnus.com>
228
229         * procfs.c (many functions): change int cmd; to long cmd;
230         Solaris /proc API calls this parameter a long, and requires it
231         for 64-bit hosts (where sizeof(long) != sizeof(int)).  UnixWare
232         calls it an int, but on existing UnixWare hosts, int and long
233         are the same size.  So long it must be.  If a future UnixWare
234         version has problems with this, we'll have to use autoconf.
235         * proc-api.c (write_with_trace): use long instead of int.
236
237 2000-05-04  Mark Kettenis  <kettenis@gnu.org>
238
239         * i386-linux-nat.c: Define PT_READ_U and PT_WRITE_U if they're not
240         already defined.
241
242 2000-05-01  Mark Kettenis  <kettenis@gnu.org>
243
244         * infrun.c (handle_inferior_event): Add missing call to keep_going
245         and missing return when handling an ordinary signal from the
246         inferior.
247
248 2000-05-04  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
249
250         * objfiles.h (SECT_OFF_DATA, SECT_OFF_TEXT, SECT_OFF_BSS,
251         SECT_OFF_RODATA): Define as functions of OBJFILE.  Add
252         sect_index_text, sect_index_data, sect_index_rodata,
253         sect_index_bss to objfile structure.
254         * gdb-stabs.h (SECT_OFF_DATA, SECT_OFF_TEXT, SECT_OFF_BSS,
255         SECT_OFF_RODATA): Remove.
256         * objfiles.c (allocate_objfile): Initialize
257         sect_index_{text,data,bss,rodata} to -1, for error detection.
258
259         * symfile.c (default_symfile_offsets): Initialize
260         sect_index_{text,data,bss,rodata} from bfd information.
261         * xcoffread.c (xcoff_symfile_offsets): Ditto.
262         * somread.c (som_symfile_offsets): Initialize
263         sect_index_{text,data,bss,rodata}.
264
265         * coffread.c, dbxread.c, elfread.c, hp-psymtab-read.c,
266         hp-symtab-read.c, hpread.c, mdebugread.c, minsyms.c,
267         mipsread.c, objfiles.c, os9kread.c, pa64solib.c, partial-stab.h,
268         remote-os9k.c, remote-vx.c, remote.c, rs6000-nat.c, somsolib.c,
269         stabsread.c, symfile.c, xcoffread.c:
270         Update use of SECT_OFF_{TEXT,DATA,BSS,RODATA} to depend on the
271         current objfile.
272
273         * xcoffread.c: Add new field objfile to find_targ_sec_arg.
274
275 Thu May  4 20:54:00 2000  Andrew Cagney  <cagney@b1.cygnus.com>
276
277         * config/mips/tm-mipsv4.h (Dest_Reg), config/mips/tm-irix5.h
278         (MIPS_NUM_ARG_REGS, Dest_Reg), config/mips/tm-mips.h
279         (MIPS_NUM_ARG_REGS), config/mips/tm-mips.h (MIPS_NUM_FP_ARG_REGS):
280         Delete unused macros.
281
282 2000-05-03  Michael Snyder  <msnyder@seadog.cygnus.com>
283
284         * solib.c (elf_locate_base, info_sharedlibrary_command):
285         Look at the bfd to determine if it is elf32 or elf64, rather
286         than using an ifdef.  This makes it runtime teststable and
287         multi-arch.
288
289 2000-05-01  Mark Kettenis  <kettenis@gnu.org>
290
291         * infrun.c (handle_inferior_event): When doing a "next", and
292         stepping out of a signal handler into its calling trampoline
293         ignore the value of step_frame_address.
294         (step_over_function): Only modify step_resume_breakpoint->frame if
295         the value of step_frame_address is non-zero.
296
297 2000-05-03  Michael Snyder  <msnyder@seadog.cygnus.com>
298
299         * monitor.c (monitor_fetch_register): MAX_REGISTER_RAW_SIZE
300         is not static in the MULTI_ARCH world, so don't use it in a
301         static array declaration.
302
303 2000-05-03  Elena Zannoni  <ezannoni@makita.cygnus.com>
304
305         * symtab.c (in_prologue): From Jim Blandy. Rewrite, more
306         intelligently, making sure we use the information from the 
307         symbol tables fully.
308
309 2000-05-02  H.J. Lu  <hjl@gnu.org>
310
311         * ia64-tdep.c (ia64_gdbarch_init): Reference to ELFOSABI_NONE
312         instead of ELFOSABI_SYSV.
313
314 Tue May  2 19:07:20 2000  Andrew Cagney  <cagney@b1.cygnus.com>
315
316         * gdbarch.sh (NPC_REGNUM, NNPC_REGNUM): Add.
317         * gdbarch.h, gdbarch.c: Re-generate.
318
319         * gdbserver/remote-utils.c (prepare_resume_reply): Change #ifdef
320         NPC_REGNUM to run-time test.
321         * findvar.c (generic_target_write_pc): Change #ifdef NPC_REGNUM
322         and NNPC_REGNUM to run-time test.
323         * procfs.c (procfs_fetch_registers): Change #ifdef NPC_REGNUM to
324         run-time test.
325         (procfs_store_registers): Ditto.
326
327 Tue May  2 18:48:57 2000  Andrew Cagney  <cagney@b1.cygnus.com>
328
329         * gdbarch.sh: Provide non- multi-arch defaults by direct
330         definition in "gdbarch.h" instead of going through "gdbarch.c".
331         * gdbarch.h, gdbarch.c: Re-generate.
332         * defs.h: When non- multi-arch, include "arch-utils.h" so that
333         legacy definitions are globally visible.
334         
335 Tue May  2 16:32:06 2000  Andrew Cagney  <cagney@b1.cygnus.com>
336
337         * MAINTAINERS: Add Syd Polk to gdbtk maintainers.
338         (symtabs): Add Elena to symtabs maintainers list.
339         (Blanket Write Privs): Add Jim Blandy.
340
341 2000-05-01  Stan Shebs  <shebs@apple.com>
342
343         Remove obsolete Gould configuration:
344         * configure.host, configure.tgt: Remove Gould configs.
345         * Makefile.in: Remove Gould-related actions.
346         * gould-xdep.c, gould-tdep.c, config/gould/*: Remove files.
347         * NEWS: Mention removal.
348         
349 Mon May  1 15:37:58 2000  Andrew Cagney  <cagney@b1.cygnus.com>
350
351         From 2000-04-28 Andreas Jaeger <aj@suse.de>:
352         * defs.h: Properly check for GCC version number.
353
354 2000-04-30  Mark Kettenis  <kettenis@gnu.org>
355
356         Fix single-stepping out of signal trampolines.
357         * config/i386/nm-linux.h (CHILD_RESUME): Define.
358         * i386-linux-nat.c (child_resume): New function.
359
360 Fri Apr 28 16:22:34 2000  Andrew Cagney  <cagney@b1.cygnus.com>
361
362         * blockframe.c (frameless_look_for_prologue): Use
363         PROLOG_FRAMELESS_P instead of SKIP_PROLOGUE_FRAMELESS_P.
364         * gdbarch.sh (PROLOG_FRAMELESS_P): Define.
365         * gdbarch.h, gdbarch.c: Re-generate.
366         * arch-utils.h, arch-utils.c (generic_prologue_frameless_p): New
367         function.
368         
369 Fri Apr 28 15:31:10 2000  Andrew Cagney  <cagney@b1.cygnus.com>
370
371         From "Serge Nikulin" <nikulin@actsw.amat.com>:
372         * m68k-tdep.c (delta68_in_sigtramp): Return 0 when the function
373         name is unknow.
374
375 2000-04-27  Michael Snyder  <msnyder@seadog.cygnus.com>
376
377         * gdbarch.sh (d10v_daddr_p, d10v_iaddr_p, d10v_convert_daddr_to_raw,
378         d10v_convert_iaddr_to_raw): make these multi-arch functions optional.
379         * gdbarch.c, gdbarch.h: regenerate
380         
381 Fri Apr 28 12:21:28 2000  Andrew Cagney  <cagney@b1.cygnus.com>
382
383         From Tim Mooney <mooney@dogbert.cc.ndsu.nodak.edu>:
384         * target.c (do_monitor_command): Cast tcomplain to correct
385         function type in comparison.
386
387 Fri Apr 28 11:43:05 2000  Andrew Cagney  <cagney@b1.cygnus.com>
388
389         From 2000-04-25 Guy Harris <guy@netapp.com>:
390         * config/alpha/alpha-osf3.mh (XDEPFILES): Add ser-tcp.o and
391         ser-pipe.o
392
393 2000-04-27  Michael Snyder  <msnyder@seadog.cygnus.com>
394
395         * jv-valprint.c (java_val_print): Add arg declaration, 
396         fix compiler warning.
397         * corelow.c (core_open): Call set_gdbarch_from_file so that 
398         gdbarch becomes aware of the architecture encoded in the 
399         corefile.
400         * findvar.c (write_register_gen): Export this useful interface.
401         * value.h (write_register_gen): Declare.
402
403 2000-04-27  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
404
405         * cxux-nat.c (add_shared_symbol_files): Don't treat .text section
406         as special in the section_addr_info structure.
407         * pa64solib.c (pa64_solib_add_solib_objfile): Ditto.
408         * osfsolib.c (symbol_add_stub): Ditto.
409         * irix5-nat.c (symbol_add_stub): Ditto.
410
411 Thu Apr 27 14:07:16 2000  Andrew Cagney  <cagney@b1.cygnus.com>
412
413         * mips-tdep.c, d10v-tdep.c: Include "arch-utils.h".
414
415 Thu Apr 27 10:06:42 2000  Andrew Cagney  <cagney@b1.cygnus.com>
416
417         * TODO: Document IRIX X ARM cross compile problems.
418
419 2000-04-26  Michael Snyder  <msnyder@seadog.cygnus.com>
420
421         * utils.c (internal_verror): Call target_terminal_ours.
422         * wrapper.h: Fix minor comment typo.
423         * proc-api.c (write_with_trace): Change 'arg' from long to int.
424         Treat 'off_t' and 'size_t' as unsigned long in printfs.
425         (lseek_with_trace): Treat 'off_t' as unsigned long in printf.
426         * procfs.c (comments): Eliminate "???" in comments, which GCC
427         wants to interpret as a trigraph.  (fill_gregset, supply_gregset,
428         fill_fpregset, supply_fpregset): Declare.
429         (procfs_wait): Sysargs is a long, change printf format to match.
430         (test-mapping, mapping_test, test_mapping_cmd) Remove (test only).
431
432 2000-04-26  Kevin Buettner  <kevinb@redhat.com>
433
434         * config/djgpp/fnchange.lst (ia64-linux-nat.c): Map to
435         ia64linux-nat.c.
436
437 Wed Apr 26 13:50:35 2000  Philippe De Muyter  <phdm@macqel.be>
438
439         * ax-gdb.c (agent_command): Remove now useless cast of
440         `free_current_contents' when passed to `make_cleanup'.
441         * coffread.c (coff_symfile_read): Ditto.
442         * dwarf2read.c (dwarf2_add_member_fn, read_array_type): Ditto.
443         (dwarf_decode_lines): Ditto.
444         * eval.c (parse_and_eval_address, parse_and_eval_address_1): Ditto.
445         (parse_and_eval, parse_to_comma_and_eval): Ditto.
446         * parse.c (parse_exp_1): Ditto.
447         * printcmd.c (print_command_1, output_command, set_command): Ditto.
448         (x_command, print_frame_args, printf_command): Ditto.
449         * top.c (execute_control_command): Ditto.
450         * tracepoint.c (validate_actionline): Ditto.
451         * typeprint.c (whatis_exp, ptype_command): Ditto.
452         (maintenance_print_type): Ditto.
453
454 2000-04-26  Kevin Buettner  <kevinb@redhat.com>
455
456         * Makefile.in (ALLDEPFILES): Add ia64-linux-tdep.c.
457         (ia64-linux-tdep.o): Add dependencies.
458         (ia64-tdep.o): Add dependency for arch-utils.h.
459         * ia64-linux-tdep.c, ia64-tdep.c (arch-utils.h): Include.
460
461 2000-04-25  Michael Snyder  <msnyder@seadog.cygnus.com>
462
463         * blockframe.c: Fix a minor typo in a comment.
464
465 2000-04-25  Kevin Buettner  <kevinb@redhat.com>
466
467         * ia64-tdep.c (examine_prologue): Recognize store instructions;
468         those whose source operands are input registers which haven't
469         been seen before are considered to be part of the prologue.
470
471 Tue Apr 25 13:51:58 2000  glen mccready  <gkm@pobox.com>
472
473         * rs6000-nat.c (xcoff_relocate_symtam): Recover from the wrong
474         patch being applied `Fri Apr  7 13:44:38 2000'.
475
476 2000-04-24  Kevin Buettner  <kevinb@redhat.com>
477
478         * ia64-linux-tdep.c: New file.
479         * ia64-tdep.c (elf-bfd.h): Include.
480         (ia64_linux_sigcontext_register_address): New extern declaration.
481         (struct gdbarch_tdep): New struct.
482         (SIGCONTEXT_REGISTER_ADDRESS): New define.
483         (read_sigcontext_register): New static function.
484         (extract_bit_field, replace_bit_field, slotN_contents,
485         replace_slotN_contents): Made static.
486         (ia64_frame_chain, ia64_frame_saved_pc, ia64_init_extra_frame_info):
487         Added new code for signal handler frames and call dummy frames.
488         (ia64_frame_init_saved_regs): Handle signal handler frames.
489         (ia64_find_saved_register): Removed.
490         (ia64_get_saved_register): Handle call dummy frames; reorganized
491         to call generic_get_saved_register() to find registers saved
492         in previous frames.
493         (process_note_abi_tag_sections): New static function.
494         (ia64_gdbarch_init): Attempt to determine the ABI/OS of the
495         executable.  Based upon this information, set target dependent
496         field sigcontext_register_address appropriately.  Also set
497         FRAME_CHAIN_VALID to be generic_func_frame_chain_valid.
498         * config/ia64/linux.mt (TDEPFILES): Add ia64-linux-tdep.o.
499         * config/ia64/tm-linux.h (IN_SIGTRAMP): Define.
500         (ia64_linux_in_sigtramp): New declaration.
501
502 2000-04-23  Eli Zaretskii  <eliz@is.elta.co.il>
503
504         * TODO, NEWS: Update due to inclusion of gdbmi.texinfo in the GDB
505         manual.
506
507 2000-04-23  Eli Zaretskii  <eliz@is.elta.co.il>
508
509         * config/djgpp/README: Explain how to unpack using djunpack.bat.
510
511 Fri Apr 21 15:23:13 2000  Andrew Cagney  <cagney@b1.cygnus.com>
512
513         * stabsread.c (REG_STRUCT_HAS_ADDR): Delete default.
514         (define_symbol): Check REG_STRUCT_HAS_ADDR_P before using
515         REG_STRUCT_HAS_ADDR.
516         (define_symbol): Ditto.
517
518         * valops.c (hand_function_call): Replace #ifdef
519         REG_STRUCT_HAS_ADDR with if REG_STRUCT_HAS_ADDR_P.  Re-indent
520         affected code.
521
522         * gdbarch.sh (REG_STRUCT_HAS_ADDR): Add along with the predicate
523         function REG_STRUCT_HAS_ADDR_P.
524         * gdbarch.h, gdbarch.c: Re-generate.
525         
526 2000-04-21  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
527
528         * gdb-stabs.h (SECT_OFF_MAX): Increase to 40.
529
530 2000-04-21  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
531
532         * win32-nat.c  (handle_load_dll): Don't treat .text as a special
533         section anymore.
534         * somread.c (som_symfile_offsets): Ditto.
535         * somsolib.c (som_solib_add_solib_objfile): Ditto.
536
537 Fri Apr 21 16:14:38 2000  Andrew Cagney  <cagney@b1.cygnus.com>
538
539         * MAINTAINERS: Make Jimmy Guo TUI maintainer.
540
541 Fri Apr 21 14:37:40 2000  Andrew Cagney  <cagney@b1.cygnus.com>
542
543         * command.h (help_all): Delete declaration.
544         * command.c (help_all): Add declaration.  Convert function
545         argument list to ISO-C.
546
547 Thu Apr 20 18:15:08 2000  Andrew Cagney  <cagney@b1.cygnus.com>
548
549         * d10v-tdep.c (d10v_gdbarch_init): Initialize stack_align.
550         (d10v_stack_align): Make static.
551         * config/d10v/tm-d10v.h (STACK_ALIGN): Delete.
552
553 Thu Apr 20 14:35:46 2000  Andrew Cagney  <cagney@b1.cygnus.com>
554
555         * valops.c (hand_function_call): Replace #ifdef STACK_ALIGN with
556         run-time test for STACK_ALIGN_P.
557         * gdbarch.sh: Add support for function and variable predicates.
558         (STACK_ALIGN): Add.  Implement with predicate - STACK_ALIGN_P.
559         * gdbarch.h, gdbarch.c: Re-generate.
560
561 Thu Apr 20 17:39:11 2000  Andrew Cagney  <cagney@b1.cygnus.com>
562
563         * defs.h, utils.c (free_current_contents): Change parameter to
564         void*.
565
566         From Philippe De Muyter  <phdm@macqel.be>:
567         * printcmd.c (print_address_symbolic): Call `make_cleanup' with
568         `(free_current_contents, &x)', not `(free, x)'.
569         * utils.c (free_current_contents): Do not `free (NULL)'.
570
571         * printcmd.c (print_address_symbolic): Cleanup after a failed
572         call to build_address_symbolic.
573
574 2000-04-20  Christopher Faylor  <cgf@cygnus.com>
575
576         * wince-stub.c (FREE): New macro.
577         (mempool): Just free any buffer prior to reuse.  Don't bother with
578         realloc.
579         (flag_single_step): New function.
580         (skip_message): Detect "helpful" Windows CE messages and skip sending
581         them to the host.
582         (wait_for_debug_event): Use skip_message to avoid sending debug
583         messages to the host.
584         (dispatch): Prelimary implementation of single step detection.
585         * wince.c: Rework SH single stepping code to be more consistent with
586         other wince targets.
587         (handle_output_debug_string): Allow first chance exceptions to come
588         through since they seem to be all that we get on some versions of
589         Windows CE.
590         (check_for_step): New function, conditionally compiled based on target.
591         (regptr): Delete obsolete function.
592         (handle_exception): Detect illegal instructions.
593         (get_child_debug_event): Return success only if event code matches
594         target.
595         (child_create_inferior): Reflect change to get_child_debug_event
596         arguments.
597
598 2000-04-20  Christopher Faylor  <cgf@cygnus.com>
599
600         * win32-nat.c (thread_rec): Be more defensive about suspending already
601         suspended threads.
602         (safe_symbol_file_add_stub): New function.
603         (safe_symbole_file_add_cleanup): New function.
604         (safe_symbol_file_add): New function.
605         (handle_load_dll): Use wrapper to add DLL symbol information to avoid
606         bogus errors from non-stabs DLLs.
607         (handle_exception): Add work around for detection of first exception
608         breakpoint which does not seem to occur on W2K.  Detect more "signals"
609         that can be effectively passed to the debuggee.  Reorganize to eliminate
610         continue_status global.
611         (child_continue): Reorganize to eliminate continue_status global.
612         (child_wait): Ditto.
613         (child_resume): Ditto.
614         (get_child_debug_event): Ditto.  Recognize when an a breakpoint
615         exception should be ignored.  Change method for signalling when an
616         important event has occured to the caller.
617         (child_create_inferior): Use new method for noticing when
618         get_child_debug_event has found something interesting.
619
620 Fri Apr  7 13:44:38 2000  glen mccready  <gkm@pobox.com>
621
622         * rs6000-nat.c (xcoff_relocate_symtab): Grow buffer if ptrace()
623           fails due to lack of space.
624
625 Fri Mar 24 12:10:38 2000  glen mccready  <gkm@pobox.com>
626
627         * command.c, command.h (help_all): Add functionality to display
628         a complete listing of available commands.
629
630 2000-04-20  Scott Bambrough <scottb@netwinder.org>
631
632         * arm-linux-nat.c (PIDGET, TIDGET): New.
633         (get_thread_id, GET_THREAD_ID): New.
634         (fetch_nwfpe_register, store_nwfpe_register): New.
635         (fetch_register, store_register): New.
636         (fetch_fpregister, store_fpregister): New.
637         (fill_gregset, supply_gregset): New.
638         (fill_fpregset, supply_fpregset): New.
639         (fetch_fpregs): Modified to use thread id's.
640         (store_fpregs): Modified to use thread id's and
641         fetch_nwfpe_register.
642         (fetch_regs): Modified to use thread id's.
643         (store_regs): Modified to use thread id's.
644         (fetch_inferior_registers): Modified to handle single register
645         fetches.
646         (store_inferior_registers): Modified to handle single register
647         stores.
648         (arm_linux_register_u_addr): Removed.
649
650         * configure.tgt: Added gdbserver to configdirs for arm*-*-linux*.
651
652         * config/arm/linux.mh
653         (NATDEPFILES): Removed core-aout.o.  Added core-regset.o.
654         (LOADLIBES): Define.
655
656         * config/arm/nm-linux.h: Include config/nm-linux.h.
657         (ATTACH_DETACH): Removed.  Defined in config/nm-linux.h.
658         (REGISTER_U_ADDR): Removed.
659         (SVR4_SHARED_LIBS): Removed.  Defined in config/nm-linux.h.
660         (#include "solib.h"): Removed.  Included via config/nm-linux.h.
661
662 Thu Apr 20 18:54:15 2000  Andrew Cagney  <cagney@b1.cygnus.com>
663
664         From Daniel Berlin <dan@cgsoftware.com> and Tim Mooney
665         <mooney@dogbert.cc.ndsu.nodak.edu>:
666         * infrun.c (follow_fork_mode_kind_names): NULL terminate
667         array. Re-indent.
668         (scheduler_enums): Ditto.
669
670 Mon Apr 17 13:37:10 2000  Andrew Cagney  <cagney@b1.cygnus.com>
671
672         * gdbarch.sh: Make multi-arch variable defaults, defaults for non-
673         multi-arch targets.
674         (TARGET_BFD_VMA_BIT, IEEE_FLOAT, CALL_DUMMY_WORDS,
675         SIZEOF_CALL_DUMMY_WORDS): Update.
676
677         * inferior.h (CALL_DUMMY_WORDS, SIZEOF_CALL_DUMMY_WORDS): Default
678         provided by gdbarch.
679         (CALL_DUMMY_P): Add FIXME. gdbarch should provide default.
680
681         * valprint.c (IEEE_FLOAT): Default provided by gdbarch.
682
683 2000-04-19  Jim Blandy  <jimb@redhat.com>
684
685         Bring RETURN_VALUE_ON_STACK under gdbarch's control.
686         * gdbarch.sh (RETURN_VALUE_ON_STACK): New entry.
687         * gdbarch.c, gdbarch.h: Regenerated.
688         * arch-utils.c (default_return_value_on_stack): New function.
689         * arch-utils.h (default_return_value_on_stack): New declaration.
690         * values.c (RETURN_VALUE_ON_STACK): Delete default definition.
691
692         * i386v-nat.c (i386_insert_nonaligned_watchpoint): Use a
693         two-dimensional array, instead of faking it with explicit index
694         arithmetic.
695
696         * minsyms.c (prim_record_minimal_symbol_and_info): Doc fix.
697         (Thanks to Guy Harris.)
698
699 2000-04-19  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
700
701         * xcoffsolib.c (solib_add): Fix call to vmap_symtab().
702
703 2000-04-19  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
704
705         * TODO:  Update.
706
707 Wed Apr 19 19:10:07 2000  Andrew Cagney  <cagney@b1.cygnus.com>
708
709         * TODO: Document -Wreturn-type problem.
710
711 2000-03-27  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
712  
713          * maint.c (_initialize_maint_cmds):  Add `mt i' alias for `mt info'.
714  
715 2000-03-27  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
716
717         * infcmd.c (_initialize_infcmd):  Add `info r' alias for
718         `info registers'.
719
720 Wed Apr 19 17:03:07 2000  Andrew Cagney  <cagney@b1.cygnus.com>
721
722         From Philippe De Muyter <phdm@macqel.be>:
723         * bcache.c (free_bcache): Do not free NULL.
724
725 Wed Apr 19 16:37:47 2000  Andrew Cagney  <cagney@b1.cygnus.com>
726
727         * TODO: Cleanup.
728         * NEWS: Update GDB version.  Duplicate paragraph explaining
729         obsolete.
730
731 Wed Apr 19 13:06:55 2000  Andrew Cagney  <cagney@b1.cygnus.com>
732
733         * Makefile.in (distclean): Delete tui/Makefile.
734         * TODO: Add deletion of tui/Makefile.in to list.
735         
736 2000-04-17  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
737
738         * symfile.h (struct section_addr_info ): Remove fields for special
739         treatment of .text, .data and .bss sections.
740
741         * solib.c (symbol_add_stub): The special field text_addr is not
742         available anymore. Search for the .text field the hard way.
743
744         * symfile.c (build_section_addr_info_from_section_table): Don't
745         fill in {text, data, bss}_addr any more.
746         (default_symfile_offsets): Don't use {text, data, bss}_addr fields
747         to fill in section_offsets for objfile.
748         (syms_from_objfile): Don't deal with {text, data, bss}_addr as a
749         special case anymore.
750         (add_symbol_file_command): Ditto.
751
752 2000-04-17  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
753
754         symfile.c: (symbol_file_command): Remove support for rombug, to
755         simplify code.
756
757 2000-04-17  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
758
759         * symfile.c (add_symbol_file_command): Rewrite the arguments
760         processing part. Simplify syntax of command. Remove support for
761         rombug.
762         (_initialize_symfile): Update help message for add-symbol-file
763         command.
764
765 Mon Apr 17 15:53:38 2000  Andrew Cagney  <cagney@b1.cygnus.com>
766
767         * gdbarch.sh (IEEE_FLOAT): Only dump when defined.
768         * gdbarch.h, gdbarch.c: Re-generate.
769
770 Mon Apr 17 11:26:01 2000  Andrew Cagney  <cagney@b1.cygnus.com>
771
772         * remote.c (REMOTE_TRANSLATE_XFER_ADDRESS), mem-break.c
773         (MEMORY_INSERT_BREAKPOINT, MEMORY_REMOVE_BREAKPOINT), target.h
774         (BREAKPOINT_FROM_PC), valops.c (COERCE_FLOAT_TO_DOUBLE),
775         gdbarch.sh (D10V_MAKE_DADDR, D10V_MAKE_IADDR,
776         FRAMELESS_FUNCTION_INVOCATION, REGISTER_CONVERTIBLE,
777         REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW,
778         REGISTER_NAME), findvar.c (POINTER_TO_ADDRESS,
779         ADDRESS_TO_POINTER): Delete default definition.  Handled by
780         gdbarch.
781
782         * gdbarch.sh: Make multi-arch defaults, defaults for non-
783         multi-arch targets.
784         (REGISTER_NAME, COERCE_FLOAT_TO_DOUBLE, REGISTER_CONVERTIBLE,
785         REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW,
786         D10V_MAKE_DADDR, D10V_MAKE_IADDR, BREAKPOINT_FROM_PC,
787         MEMORY_INSERT_BREAKPOINT, MEMORY_REMOVE_BREAKPOINT,
788         REMOTE_TRANSLATE_XFER_ADDRESS, FRAMELESS_FUNCTION_INVOCATION):
789         Provide default/legacy implementation.
790         (REGISTER_NAMES, CALL_DUMMY): Allow legacy definition.
791         * gdbarch.h, gdbarch.c: Re-generate.
792
793 2000-04-16  Jim Blandy  <jimb@redhat.com>
794
795         * findvar.c (store_typed_address, extract_typed_address): Fix
796         function names in error messages.
797
798 2000-04-16  Eli Zaretskii  <eliz@is.elta.co.il>
799
800         * config/djgpp/config.sed: Fix the lines which edit clean: and
801         uninstall-info: targets.
802
803 2000-04-14  Jim Blandy  <jimb@redhat.com>
804
805         Bring IEEE_FLOAT under gdbarch's control.
806         * gdbarch.sh (IEEE_FLOAT): New entry.
807         * gdbarch.c, gdbarch.h: Regenerated.
808         * valprint.c (IEEE_FLOAT): Provide a default #definition for this.
809         (print_floating): Use IEEE_FLOAT as if it were an expression; use
810         the code specific to IEEE-format numbers whenever the value of
811         IEEE_FLOAT is non-zero.
812         * config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
813         config/arc/tm-arc.h, config/arm/tm-arm.h, config/fr30/tm-fr30.h,
814         config/h8300/tm-h8300.h, config/i386/tm-i386.h,
815         config/i960/tm-i960.h, config/m88k/tm-m88k.h,
816         config/mips/tm-mips.h, config/pa/tm-hppa.h,
817         config/sparc/tm-sparc.h, config/delta/tm-delta.h,
818         config/frv/tm-frv.h (IEEE_FLOAT): For all ports that #define
819         IEEE_FLOAT, make sure they give it the value (1).
820
821         Provide the hooks needed to support architectures on which
822         pointers are not always simple byte addresses.
823
824         * gdbarch.sh (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Two new
825         functions which architectures can redefine, defaulting to
826         generic_pointer_to_address and generic_address_to_pointer.
827         * findvar.c (extract_typed_address, store_typed_address,
828         generic_pointer_to_address, generic_address_to_pointer): New
829         functions.
830         (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Provide default
831         definitions.
832         (extract_address, store_address): Doc fixes.
833         * values.c (value_as_pointer): Doc fix.
834         (value_from_pointer): New function.
835         * defs.h (extract_typed_address, store_typed_address): New
836         declarations.
837         * inferior.h (generic_address_to_pointer,
838         generic_pointer_to_address): New declarations.
839         * value.h (value_from_pointer): New declaration.
840         
841         The following changes are all of the general form "Use these
842         functions instead of these other functions."  In each case, the
843         change is because the new calls provide enough information to do
844         the appropriate address / pointer conversions, where the old calls
845         did not, or because the new functions are more appropriately named
846         for the operation being performed.
847         
848         * ax-gdb.c (const_var_ref): Use value_from_pointer, not
849         value_from_longest.
850         * blockframe.c (generic_push_dummy_frame): Use read_pc and
851         read_sp, not read_register.
852         * c-valprint.c (c_val_print): Use extract_typed_address instead of
853         extract_address to extract vtable entries and references.
854         * cp-valprint.c (cp_print_value_fields): Use value_from_pointer
855         instead of value_from_longest to extract the vtable's address.
856         * eval.c (evaluate_subexp_standard): Use value_from_pointer
857         instead of value_from_longest to compute `this', and for doing
858         pointer-to-member dereferencing.
859         * findvar.c (read_register): Use extract_unsigned_integer, not
860         extract_address.
861         (read_var_value): Use store_typed_address instead of store_address
862         for building label values.
863         (locate_var_value): Use value_from_pointer instead of
864         value_from_longest.
865         * hppa-tdep.c (find_stub_with_shl_get): Use value_from_pointer,
866         instead of value_from_longest, to build arguments to __d_shl_get.
867         * printcmd.c (set_next_address): Use value_from_pointer, not
868         value_from_longest.
869         (x_command): Use value_from_pointer, not value_from_longest.
870         * tracepoint.c (set_traceframe_context): Use value_from_pointer,
871         not value_from_longest.
872         * valarith.c (value_add, value_sub): Use value_from_pointer, not
873         value_from_longest.
874         * valops.c (find_function_in_inferior, value_coerce_array,
875         value_coerce_function, value_addr, hand_function_call): Same.
876         * value.h (COERCE_REF): Use unpack_pointer, not unpack_long. 
877         * values.c (unpack_long): Use extract_typed_address to produce
878         addresses from pointers and references, not extract_address.
879         (value_from_longest): Use store_typed_address instead of
880         store_address to produce pointer and reference values.
881
882 2000-04-13  Mark Kettenis  <kettenis@gnu.org>
883
884         * acconfig.h (HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T,
885         HAVE_PSADDR_T): Add them here instead of in config.in.
886
887         * acconfig.h (PRFPREGSET_T_BROKEN): New define.
888         * configure.in: Add check for broken prfpregset_t type.
889         * lin-thread.c (gdb_prfpregset): New typedef, depends on
890         definition of PRFPREGSET_T_BROKEN.
891         (ps_lgetfpregs, ps_lsetfpregs, p_td_thr_getfpregs,
892         p_td_thr_setfpregs, thread_db_fetch_registers,
893         thread_db_store_registers): Use gdb_prfpregset_t instead of
894         prfpregset_t.
895         * config.in: Regenerated.
896         * configure: Regenerated.
897
898 2000-04-13  DJ Delorie  <dj@cygnus.com>
899
900         * mips-tdep.c (do_fp_register_row): copy the number of bytes
901         allocated, not the size of the pointer.
902
903 2000-04-13  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
904
905         * config/i386/nm-i386sol2.h (CANNOT_STEP_HW_WATCHPOINTS):  Define.
906         * config/i386/tm-i386sol2.h (HAVE_I387_REGS):  Define.
907         * i386v4-nat.c (supply_fpregset, fill_fpregset):  Add code
908         to handle floating point registers if NUM_FREGS is not zero.
909
910 2000-04-13  Nick Duffek  <nsd@cygnus.com>
911
912         * sol-thread.c (init_sol_core_ops): Initialize to_thread_alive
913         and document to_find_new_threads bug.
914
915 2000-04-13  Eli Zaretskii  <eliz@is.elta.co.il>
916
917         * infrun.c (proceed, normal_stop): Change the error message about
918         failure to insert breakpoints/watchpoints so that it makes sense
919         even if ptrace is not used or no other processes can be active.
920
921 Thu Apr 13 13:24:27 2000  Andrew Cagney  <cagney@b1.cygnus.com>
922
923         * configure.in: Add --enable-maintainer-mode.
924         * aclocal.m4, configure: Re-generate.
925
926         * Makefile.in ($(srcdir)/copying.c): Enable dependencies only when
927         on maintainer-mode.  Update copying.c in source directory.
928         (copying.txt): Delete rule.
929         (copying.o): Add explict paths to $(srcdir) and explicit make
930         rule.
931
932 2000-04-12  Kevin Buettner  <kevinb@redhat.com>
933
934         * ia64-linux-nat.c (IA64_PSR_DB, IA64_PSR_DD): Define.
935         (fetch_debug_register, fetch_debug_register_pair,
936         store_debug_register, store_debug_register_pair, is_power_of_2,
937         enable_watchpoints_in_psr, ia64_linux_insert_watchpoint,
938         ia64_linux_remove_watchpoint, ia64_linux_stopped_by_watchpoint):
939         New functions.
940         * config/ia64/nm-linux.h (TARGET_HAS_HARDWARE_WATCHPOINTS,
941         TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_STEPPABLE_WATCHPOINT,
942         STOPPED_BY_WATCHPOINT, target_insert_watchpoint,
943         target_remove_watchpoint): Define.
944         (ia64_linux_stopped_by_watchpoint, ia64_linux_insert_watchpoint,
945         ia64_linux_remove_watchpoint): Declare.
946
947 2000-04-12  Eli Zaretskii  <eliz@is.elta.co.il>
948
949         * go32-nat.c (go32_insert_hw_breakpoint): When there are no more
950         hardware breakpoint resources, return EBUSY.
951         (go32_handle_nonaligned_watchpoint): If the argument WHAT is not
952         one of the enumerated values, return EINVAL.
953
954 2000-04-12  Eli Zaretskii  <eliz@is.elta.co.il>
955
956         * README: Mention special build instructions for DJGPP.
957         * NEWS: Update with FP features on x87 platforms, and
958         DJGPP-related changes.
959
960 2000-04-12  Eli Zaretskii  <eliz@is.elta.co.il>
961
962         * top.c (gdb_completer_file_name_break_characters): New variable.
963         (line_completion_function): When completing on file names, use
964         gdb_completer_file_name_break_characters as word break
965         characters for the readline library.
966
967 2000-04-12  Mark Kettenis  <kettenis@gnu.org>
968
969         * i387-tdep.c (print_i387_value): Avoid call to
970         floatformat_to_doublest if long double type is the same on host
971         and target.
972
973 2000-04-11  Fernando Nasser  <fnasser@cygnus.com>
974
975         * wrapper.h: Remove definitions of internal functions.
976         * wrapper.c: Remove definitions of exported functions (which are
977         already in wrapper.h) and make static all internal wrap_* functions.
978
979 Mon Apr 10 21:58:36 2000  Andrew Cagney  <cagney@b1.cygnus.com>
980
981         * acconfig.h (USE_INCLUDED_REGEX): Add.
982         * Makefile.in (REGEX_CFLAGS): Delete
983         * configure.in (REGEX_CFLAGS): Delete. Use AC_DEFINE instead.
984         * configure, config.in: Re-generate.
985
986 2000-04-10  Philip Blundell <philb@gnu.org>
987
988         * arm-linux-nat.c (arm_skip_solib_resolver): Remove and move to
989         arm-linux-tdep.c.
990         * arm-linux-tdep.c (arm_skip_solib_resolver): New.
991
992 2000-04-10  Fernando Nasser  <fnasser@cygnus.com>
993
994         From 2000-04-10 Rodney Brown <rdb@redhat.com>:
995         * command.h (enum command_class): Remove trailing "," to placate
996         AIX xlc.
997
998 Mon Apr 10 20:17:32 2000  Andrew Cagney  <cagney@b1.cygnus.com>
999
1000         * TODO, NEWS: Update.  Mention MI.
1001
1002 Mon Apr 10 00:21:09 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1003
1004         * gdbarch-utils.h, gdbarch-utils.c: Delete.
1005         * arch-utils.h, arch-utils.c: New files.  Avoid 14 character file
1006         name problems.
1007         * Makefile.in: Update.
1008         * gdbarch.c: Update.
1009
1010 Sun Apr  9 23:42:16 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1011
1012         From 2000-04-07 Jonathan Larmour <jlarmour@redhat.co.uk>:
1013         * mips-tdep.c (saved_gpreg_size_enums): Define enum command for
1014         new "set mips saved-gpreg-size" command
1015         (MIPS_SAVED_REGSIZE): Now a function mips_saved_regsize()
1016         (MIPS_DEFAULT_SAVED_REGSIZE): Define for default MIPS_SAVED_REGSIZE,
1017         either from target, or gdb multi-arch
1018         (show_mips_command): New. For "show mips" prefix command
1019         (set_mips_command): New. For "show mips" prefix command
1020         (_initialize_mips_tdep): Add top-level mips prefix command
1021         Add "set mips saved-gpreg-size" command
1022
1023         * mips-tdep.c (struct gdbarch_tdep): Rename mips_saved_regsize to
1024         mips_default_saved_regsize.
1025         (mips_gdbarch_init): Update.
1026         (MIPS_DEFAULT_SAVED_REGSIZE): Update.
1027         (mips_gdbarch_init): Use MIPS_REGSIZE as the default value for
1028         mips_default_saved_regsize.
1029
1030 Sun Apr  9 23:27:00 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1031
1032         From 2000-04-07 J.T. Conklin <jtc@redback.com>:
1033         * lynx-nat.c (fetch_inferior_registers, store_inferior_registers):
1034         replace calls to target_xfer_memory() with target_read_memory()
1035         and target_write_memory().
1036
1037 Sun Apr  9 22:54:29 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1038
1039         * valops.c (value_rtti_type): Compare VALUE_ADDRESS with ``0'' not
1040         NULL. Macro returns a CORE_ADDR.
1041
1042 2000-04-08  Jim Blandy  <jimb@redhat.com>
1043
1044         * dwarf2read.c: Revert Andrew Cagney's change of Dec 15, 1997.
1045         Don't include "bfd-elf.h".
1046         (address_significant_size): Delete variable.
1047         (dwarf2_build_psymtabs_hard): Don't set it, or check for
1048         consistency between it and the Dwarf 2 compilation unit header
1049         address size.
1050         (read_address): Don't mask off bits above
1051         address_significant_size.
1052         * Makefile.in (dwarf2read.o): Don't depend on $(elf_bfd_h).
1053         (elf_bfd_h): Remove variable; it's no longer used.
1054
1055 2000-04-08  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
1056
1057         * configure.in (NEW_PROC_API):  Escape square brackets when testing
1058         for solaris2.[678].
1059         * configure:  Regenerate.
1060
1061 2000-04-07  Scott Bambrough <scottb@netwinder.org>
1062
1063         * ChangeLog: Correct date on last entry.
1064         * arm-linux-tdep.c (arm_linux_push_arguments): New function.
1065         * config/arm/tm-linux: Redefined PUSH_ARGUMENTS for Linux.  
1066         * config/arm/tm-embed: Fix build warning from redefinition of
1067         LOWEST_PC.
1068         * config/arm/tm-arm.h: Remove TARGET_BYTE_ORDER_SELECTABLE.
1069         * config/arm/tm-wince.h: Remove TARGET_BYTE_ORDER_SELECTABLE and 
1070         TARGET_BYTE_ORDER.  Add TARGET_BYTE_ORDER_SELECTABLE_P to 
1071         override default in tm-arm.h.  Use default target byte order
1072         from tm-arm.h.
1073
1074 2000-04-07  Scott Bambrough <scottb@netwinder.org>
1075
1076         * Makefile.in: Add dependency information for arm-linux-tdep.c.
1077         * config/djgpp/fnchange.lst: Add arm-linux-tdep.c, arm-linux-nat.c.
1078
1079 2000-04-07  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
1080
1081         * sol-thread.c (gdb_ps_addr_t):  New typedef, depends on definition
1082         of PROC_SERVICE_IS_OLD.
1083         (ps_pglobal_lookup, ps_pdread, ps_pdwrite, ps_ptread, ps_ptwrite,
1084         rw_common):  Change argument type from psaddr_t to gdb_ps_addr_t.
1085
1086 Fri Apr  7 17:18:42 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1087
1088         * Makefile.in (CFLAGS): Set using configure.
1089
1090         * configure.in (WARN_CFLAGS): Enable by default when GCC.
1091         * configure: Re-generate.
1092
1093 Fri Apr  7 13:33:43 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1094
1095         From 2000-03-27 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
1096         * procfs.c (init_procfs_ops):  Set procfs_ops.to_has_memory and
1097         procfs_ops.to_has_all_memory to 1.
1098
1099         * TODO: Update
1100
1101 2000-04-06  Nick Duffek  <nsd@cygnus.com>
1102
1103         * configure.in (_MSE_INT_H): Define on Solaris 7.
1104         (NEW_PROC_API): Define on Solaris 7 and 8 as well as 6.
1105         * acconfig.h (_MSE_INT_H): Define on Solaris 7.
1106         * configure: Regenerate.
1107         * config.in: Regenerate.
1108
1109 2000-04-06  Michael Snyder  <msnyder@cygnus.com>
1110
1111         * sol-thread.c (GET_LWP, GET_THREAD, BUILD_LWP, BUILD_THREAD):
1112         Change to rely on PIDGET etc.
1113         * config/i386/nm-i386sol2.h (TARGET_HAS_WATCHPOINTS, 
1114         TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT,
1115         STOPPED_BY_WATCHPOINT, target_[insert/remove]_watchpoint):
1116         define.  Allow target to use procfs hardware watchpoints.
1117         * config/sparc/nm-sun4sol2.h: ditto.
1118         * config/i386/tm-i386sol2.h (PIDGET, TIDGET, MERGEPID): modify
1119         definitions to use 16 bits for the pid, 15 bits for the tid, and
1120         1 bit for the flag.
1121         * config/sparc/tm-sun4sol2.h: ditto.
1122         (SOFTWARE_SINGLE_STEP, SOFTWARE_SINGLE_STEP_P): undefine.
1123         * testsuite/gdb.threads/pthreads.exp (all_threads_running): Allow
1124         for more than 15 thread increments.
1125
1126 2000-04-06  Eli Zaretskii  <eliz@is.elta.co.il>
1127
1128         * top.c (filename_completer): Set subsequent_name to 1 early on,
1129         to prevent an infinite loop if the first file in the directory is
1130         a backup file (whose name ends in a `~').
1131
1132 2000-04-05  Jim Blandy  <jimb@redhat.com>
1133
1134         * solib.c (update_solib_list): New function.
1135         (solib_add): Call update_solib_list, and then read symbols.
1136         (info_sharedlibrary_command): Call update_solib_list, not
1137         solib_add.
1138
1139 2000-04-05  Scott Bambrough <scottb@netwinder.org>
1140
1141         * arm-linux-tdep.c: Resolve implicit function declarations by 
1142         including target.h and value.h.  Inclusion of symtab.h is
1143         no longer needed.
1144
1145 2000-04-05  Scott Bambrough <scottb@netwinder.org>
1146
1147         * arm-linux-tdep.c: New file.
1148         * arm-linux-nat.c (fetch_fpregs): Remove unused code.
1149         (arm_get_longjmp_target): Moved it and all defines 
1150         it uses to arm-linux-tdep.c.
1151         (arm_linux_extract_return_value): Moved to
1152         arm-linux-tdep.c.
1153         * config/arm/linux.mt: Add arm-linux-tdep.c to TDEPFILES.
1154
1155 2000-04-04  Nick Duffek  <nsd@cygnus.com>
1156
1157         * infrun.c (handle_inferior_event): Call target_mourn_inferior
1158         instead of kill_target.
1159
1160 2000-04-04  Daniel Berlin  <dan@cgsoftware.com>
1161
1162         * TODO: Make note of various C++ things i have planned for 5.1.
1163
1164 Tue Apr  4 12:13:19 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1165
1166         * printcmd.c (print_scalar_formatted): Use local variable ptr_bit
1167         in shift.  Stop GCC thinking it has a shift overflow.
1168
1169 2000-04-03  H.J. Lu  <hjl@gnu.org>
1170
1171         * TODO: Remove the regex entry.
1172
1173 2000-04-03  H.J. Lu  <hjl@gnu.org>
1174
1175         * gdb_regex.h: New. Include "regex.h" if USE_INCLUDED_REGEX
1176         is defined and <regex.h> otherwise.
1177
1178         * irix5-nat.c: Include "gdb_regex.h" instead of "gnu-regex.h".
1179         * monitor.c: Likewise.
1180         * osfsolib.c: Likewise.
1181         * solib.c: Likewise.
1182         * source.c: Likewise.
1183         * symtab.c: Likewise.
1184
1185         * Makefile.in (REGEX): Changed to @REGEX@.
1186         (REGEX_CFLAGS): New.
1187         (REGEX1): Removed.
1188         (ADD_DEPS): Use $(REGEX) instead of $(REGEX1).
1189         (INTERNAL_WARN_CFLAGS): Add $(REGEX_CFLAGS).
1190
1191         * configure.in (--with-included-regex): New switch.
1192         (REGEX): New. Subsstitue @REGEX@ in Makefile.in.
1193         (REGEX_CFLAGS): New. Subsstitue @REGEX_CFLAGS@ in Makefile.in.
1194         * configure: Regenerated.
1195
1196 2000-04-03  Kevin Buettner  <kevinb@redhat.com>
1197
1198         * NEWS (powerpc-*-linux*): Mention.
1199
1200 2000-04-03  J.T. Conklin  <jtc@redback.com>
1201
1202         * config/i386/xm-nbsd.h (HOST_LONG_DOUBLE_FORMAT): Define.
1203
1204 2000-04-03  Kevin Buettner  <kevinb@redhat.com>
1205
1206         * Makefile.in (ALLDEPFILES): Add ia64-linux-nat.c and ia64-tdep.c.
1207         (ia64-linux-nat.o, ia64-tdep.o): Add dependencies.
1208
1209         * ia64-linux-nat.c (fill_gregset): Implement.
1210         (supply_fpregset, fill_fpregset): New functions.
1211
1212         * ia64-tdep.c (ia64_init_extra_frame_info): Revise manner in
1213         which the CFM is fetched for certain frames.
1214         (find_global_pointer, find_extant_func_descr): Don't use
1215         partial symtabs for locating sections.
1216
1217         * config/ia64/linux.mh (LOADLIBES): Define.
1218         (NATDEPFILES): Add linux-thread.o and lin-thread.o.
1219         * config/ia64/nm-linux.h (nm-linux.h): Include this upper-level
1220         file containing generic linux declarations/definitions.
1221         (SVR4_SHARED_LIBS, ATTACH_DETACH): Remove defines; already
1222         defined in generic nm-linux.h.
1223         (solib.h): Remove include; already included in generic nm-linux.h.
1224
1225 2000-04-03  Jim Blandy  <jimb@redhat.com>
1226
1227         * solib.c (solib_add): Move all the code for loading symbol tables
1228         below the code to sort out additions and removals.  That way, we
1229         always catch all loaded shared libraries whose symbols we haven't
1230         grabbed yet.
1231
1232         * solib.c (solib_add): Don't try to free a shared object's objfile
1233         if it doesn't have one.  Duh.
1234
1235         * solib.c (solib_add): If a pattern was given, but it doesn't
1236         match any currently loaded shared libraries, print a message;
1237         don't just be silent.
1238
1239 2000-04-03  Eli Zaretskii  <eliz@is.elta.co.il>
1240
1241         * go32-nat.c (go32_handle_nonaligned_watchpoint): Use a
1242         two-dimensional array instead of faking it with index
1243         arithmetics.
1244
1245 2000-04-03  Eli Zaretskii  <eliz@is.elta.co.il>
1246
1247         * config/i386/xm-go32.h (HOST_LONG_DOUBLE_FORMAT): Define.
1248
1249         * config/i386/tm-go32.h (TARGET_LONG_DOUBLE_BIT): Remove
1250         definition (and use the common one in tm-i386.h).
1251         (REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Likewise.
1252         (I386_DJGPP_TARGET): Don't define, it's no longer required.
1253         (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): Remove definition,
1254         i386-tdep.c defines it for all x86 targets.
1255         (LD_I387, HEX_LONG_DOUBLE_INPUT): Remove.
1256
1257         * config/djgpp/fnchange.lst: Add i386-linux-tdep.c.
1258
1259         * config/djgpp/djcheck.sh: Edit the copyright year out of the test
1260         results.  Fix editing of `main' arguments for non-GNU Sed.
1261
1262 2000-04-03  Eli Zaretskii  <eliz@is.elta.co.il>
1263
1264         * symfile.c (map_overlay_command, unmap_overlay_command): Fix
1265         error message: there's no "overlay on" command.
1266
1267 2000-04-03  Eli Zaretskii  <eliz@is.elta.co.il>
1268
1269         * Makefile.in (copying.c): Depend on copying.txt, not COPYING.
1270         (copying.txt): New target, a link to COPYING.
1271
1272 Mon Apr  3 18:20:03 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1273
1274         * TODO: Update.
1275         
1276 Mon Apr  3 14:56:11 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1277
1278         * top.c: Re-indent.
1279         (set_hook, error_hook): Remove PARAMS.
1280
1281 Mon Apr  3 14:45:25 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1282
1283         * symtab.h (add_minsym_to_demangled_hash_table): Revert 2000-03-29
1284         Daniel Berlin <dan@cgsoftware.com>.  Function was static.
1285         * minsyms.c (add_minsym_to_demangled_hash_table): Add prototype.
1286
1287 Mon Apr  3 14:10:37 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1288
1289         * gdb-events.h, gdb-events.c, gdb-events.sh: Re-indent.
1290
1291 2000-04-02  Nick Duffek  <nsd@cygnus.com>
1292
1293         * gdbtypes.c (safe_parse_type): New wrapper function to ignore
1294         error() during parse_and_eval_type().
1295         (check_stub_method): Call safe_parse_type instead of
1296         parse_and_eval_type().
1297         * wrapper.c (gdb_parse_and_eval_type): New wrapper function.
1298         (wrap_parse_and_eval_type): New support function.
1299         * wrapper.h (gdb_parse_and_eval_type): Prototype.
1300         (wrap_parse_and_eval_type): Prototype.
1301
1302 Sun Apr  2 10:32:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1303
1304         * MAINTAINERS: Eli Zaretskii is a doco maintainer.
1305
1306 Fri Mar 31 08:59:58 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1307
1308         * gdbarch-utils.h, gdbarch-utils.c: New files.
1309         * Makefile.in (SFILES, COMMON_OBS): Update.
1310         (gdbarch_utils_h) Define.
1311         (gdbarch-utils.o): Add dependencies.
1312         
1313         * gdbarch.c, gdbarch.sh: Include "gdbarch-utils.h". Fix code
1314         handling default method values.
1315         (startup_gdbarch): Rename default_gdbarch, name misleading.
1316         (breakpoint_from_pc): Default to legacy_breakpoint_from_pc.
1317         (register_name): Default to legacy_register_name.
1318         (call_dummy_words): Default to legacy_call_dummy_words.
1319         (sizeof_call_dummy_words): Default to
1320         legacy_sizeof_call_dummy_words.
1321         (register_convertible): Default to
1322         generic_register_convertible_not.
1323         (breakpoint_from_pc): Default to legacy_breakpoint_from_pc.
1324         (remote_translate_xfer_address): Default to
1325         generic_remote_translate_xfer_address.
1326         (frameless_function_invocation): Default to
1327         generic_frameless_function_invocation_not.
1328
1329 2000-04-02  Mark Kettenis  <kettenis@gnu.org>
1330
1331         * i386-linux-nat.c: Add copyright notice.
1332
1333         * config/i386/xm-linux.h (HOST_LONG_DOUBLE_FORMAT): Define as
1334         &floatformat_i387_ext.
1335         * config/i386/xm-i386gnu.h (HOST_LONG_DOUBLE_FORMAT): Likewise.
1336
1337 2000-03-29  Mark Kettenis  <kettenis@gnu.org>
1338
1339         * findvar.c (extract_floating): Remove reference to
1340         TARGET_EXTRACT_FLOATING.
1341         (store_floating): Remove reference to TARGET_STORE_FLOATING.
1342
1343 2000-03-30  Fernando Nasser  <fnasser@cygnus.com>
1344
1345         * wrapper.c (gdb_value_subscript, wrap_value_subscript): New functions.
1346         Safe version of value_subscript.
1347         * varobj.c (): Use gdb_value_subscript() to get an array element value.
1348
1349 2000-03-30  Michael Snyder  <msnyder@cleaver.cygnus.com>
1350
1351         * ui-file.c: Include "gdb_string.h"
1352         * cli-out.c: Include gdb_string.h to avoid compiler warnings.
1353         * wrapper.[ch] (struct gdb_wrapper_arguments): Change fields into 
1354         unions, since they are all used to hold both pointers and ints
1355         at various times.  Casting pointer to int and vice versa gives
1356         warnings (and is not safe) if they are not the same size.
1357         
1358 2000-03-30  Michael Snyder  <msnyder@cleaver.cygnus.com>
1359
1360         * defs.h (struct continuation_arg): Make 'data' a union, to avoid
1361         casting problems when int and pointer are not the  same size.
1362         * event-top.c (command_handler): Use data as a union.
1363         (command_line_handler_continuation): Ditto.
1364         * infcmd.c (step_1_continuation): Use data as a union.  Re-indent.
1365         (step_once): ditto.  (finish_command_continuation): Ditto.
1366         (finish_command): Ditto.  
1367         * breakpoint.c (until_break_command): Use data as a union.
1368         (until_break_command_continuation): Ditto.
1369         * utils.c (add_intermediate_continuation): Fix typo in comment.
1370
1371 Thu Mar 30 12:09:50 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1372
1373         * gdbarch.h, gdbarch.c: Re-indent.  Remove FIXMEs.
1374         * gdbarch.sh: Re-sync with gdbarch.[hc].
1375
1376 2000-03-29  Daniel Berlin  <dan@cgsoftware.com>
1377
1378         * minsyms.c (add_minsym_to_demangled_hash_table): New function.
1379         (install_minimal_symbols): Fix demangled symbol problems caused by
1380         using add_minsym_to_hash_table for the demangled names, which is
1381         wrong. Now we use add_minsym_to_demangled_hash_table.
1382         (lookup_minimal_symbol): Fix problems with demangled symbol lookup
1383         caused by weird control flow.
1384         * symtab.h: Add add_minsym_to_demangled_hash_table prototype here.
1385
1386 2000-03-29  Jason Merrill  <jason@casey.cygnus.com>
1387
1388         * configure.in: -linux-gnu*, not -linux-gnu.
1389
1390 Tue Mar 28 18:28:40 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1391
1392         * remote.c (remote_threads_extra_info): Replace qfThreadExtraInfo
1393         with qThreadExtraInfo.
1394
1395 2000-03-29  J.T. Conklin  <jtc@redback.com> 
1396  
1397         * i386nbsd-nat.c (fetch_core_registers): Make static. 
1398  
1399         * m68knbsd-nat.c (fetch_core_registers): Make static. 
1400         (m68knbsd_core_fns, _initialize_m68knbsd_nat): Added. 
1401  
1402 Wed Mar 29 13:40:40 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1403
1404         * TODO: Update GDB 5 status.
1405
1406 Wed Mar 29 10:16:35 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1407
1408         * breakpoint.h (remove_hw_watchpoints): Add declaration.
1409         * breakpoints.c (remove_hw_watchpoints): Update.
1410         * maint.c (maintenance_do_deprecate): Avoid assignment within IF
1411         condition.
1412
1413 2000-03-28  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
1414
1415         breakpoint.c, breakpoint.h (remove_hw_watchpoints):  New function.
1416         infrun.c (resume):  Remove hardware watchpoints before stepping
1417         when CANNOT_STEP_HW_WATCHPOINTS is nonzero.
1418
1419 2000-03-28  Michael Snyder  <msnyder@cleaver.cygnus.com>
1420
1421         * Makefile.in: Anchor tui-file.h dependency to $srcdir.
1422
1423 2000-03-28  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
1424
1425         * procfs.c (proc_set_watchpoint):  Declare addr parameter as
1426         CORE_ADDR, to match call from procfs_set_watchpoint.
1427
1428         * breakpoint.c (insert_breakpoints, do_enable_breakpoint):  
1429         Reselect the saved frame silently after frame selection for 
1430         watchpoint evaluation.
1431         (insert_breakpoints):  Add missing space in `Hardware watchpoint
1432         deleted' message.  Do not reinsert hardware watchpoint if it is
1433         already marked for deletion at next stop.
1434
1435 2000-03-28  Christopher Faylor  <cgf@cygnus.com>
1436
1437         * partial-stab.h: Add one more check against corrupted or irregular
1438         stabs entry.
1439
1440 Tue Mar 28 12:23:37 2000  Philippe De Muyter  <phdm@macqel.be>
1441
1442         * gnu-regex.c (regerror): Function renamed from `__regerror'.
1443         (Change also approved in the mainline glibc sources)
1444
1445 Tue Mar 28 18:19:50 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1446
1447         From 2000-03-20 Jonathan Larmour <jlarmour@redhat.co.uk>:
1448         * ser-unix.c (do_unix_readchar): Reorganise to be more robust,
1449         particularly ensuring it can't return SERIAL_TIMEOUT when told
1450         not to time out.
1451
1452 2000-03-24  Daniel Berlin  <dan@cgsoftware.com>
1453
1454         * gdbtypes.c (_initialize_gdbtypes): Add "set debug overload",
1455         which never existed before, and thus, has no deprecated old command.
1456
1457         * gdbarch.c (_initialize_gdbarch): Add "set debug arch", deprecate
1458         "set archdebug" (same goes for the show commands).
1459         * gdb-events.c (_initialize_gdb_events): Add "set debug event",
1460         deprecate "set eventdebug" (same goes for the show commands).
1461         * gdbcmd.h: Add the setdebuglist and showdebuglist externs.
1462         * top.c (init_main): Deprecate remotedebug, use "set/show debug remote"
1463         instead.
1464         x(init_main): Add the "set debug" and "show debug" commands.
1465         Add setdebuglist and showdebuglist.
1466
1467 Fri Mar 24 13:00:10 2000  Daniel Berlin <dan@cgsoftware.com>
1468
1469         * maint.c (maintenance_do_deprecate): Fix crash if you call with no arguments, and fixed the warning.
1470           Added prototype for the deprecate command so it doesn't complain.
1471
1472 Tue Mar 28 11:52:45 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1473
1474         * top.c (print_gdb_version): Bump copyright year to 2000.
1475
1476 Tue Mar 28 10:13:11 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1477
1478         * MAINTAINERS: Add Glen McCready to write after approval list.
1479
1480 Tue Mar 28 09:59:00 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1481
1482         * acconfig.h: Fix typo in comment describing HAVE_PTRACE_GETREGS.
1483         * config.h: Regenerate.
1484         
1485 Mon Mar 27 19:53:29 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1486
1487         * TODO: Update.  Add criteria for next release of GDB.
1488
1489 Mon Mar 27 17:20:25 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1490
1491         * acconfig.h: Provide default for HAVE_PTRACE_GETREGS.
1492         * config.h: Regenerate.
1493
1494 Mon Mar 27 16:43:35 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1495
1496         * Makefile.in (install-only): Create $(bindir) and $(man1dir)
1497         before installing GDB.
1498
1499 Mon Mar 27 16:26:11 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1500
1501         * Makefile.in (all-gdbtk): Check for an existing link/directory.
1502         Re-format warning message.  Document that post 5.0 this can be
1503         deleted.
1504
1505 Mon Mar 27 14:46:37 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1506
1507         * ChangeLog: Revert whitespace changes.
1508
1509 Mon Mar 27 10:20:34 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1510
1511         * MAINTAINERS: Update folks who need accounts.
1512
1513 Mon Mar 27 09:29:14 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1514
1515         * MAINTAINERS: J.T. Conklin is NetBSD maintainer.
1516
1517 2000-03-27  Mark Kettenis  <kettenis@gnu.org>
1518
1519         * config/i386/tm-i386.h: Fix typo.  It is TARGET_LONG_DOUBLE_BIT
1520         instead of TARGET_LONG_DOUBLE_BITS.
1521         * config/i386/tm-i386mk.h: Likewise.
1522
1523 2000-03-26  Mark Kettenis  <kettenis@gnu.org>
1524
1525         Provide `long double' support for most i386 targets.
1526         * config/i386/tm-i386.h (TARGET_LONG_DOUBLE_FORMAT): Define as
1527         &floatformat_i387_ext.
1528         (TARGET_LONG_DOUBLE_BITS): Define as 96.
1529         (REGISTER_VIRTUAL_TYPE): Change type for FPU registers to
1530         `builtin_type_long_double'.
1531         (REGISTER_CONVERT_TO_VIRTUAL): Call
1532         i386_register_convert_to_virtual.
1533         (REGISTER_CONVERT_TO_RAW): Call i386_register_convert_to_raw.
1534         (i387_to_double, double_to_i387): Remove prototypes.
1535         (i386_extract_return_value): Change prototype to match definition
1536         in i386-tdep.c.
1537         * config/i386/tm-i386mk.h (TARGET_LONG_DOUBLE_FORMAT): #undef.
1538         (TARGET_LONG_DOUBLE_BITS): #undef.
1539         * config/i386/tm-linux.h (TARGET_LONG_DOUBLE_BIT): Remove.
1540         [HAVE_LONG_DOUBLE && HOST_I386] (LD_I387): Remove.
1541         (i387_extract_floating, i387_store_floating): Remove prototypes.
1542         (TARGET_EXTRACT_FLOATING, TARGET_STORE_FLOATING): Remove.
1543         (REGISTER_CONVERT_TO_VIRTUAL, REGOISTER_CONVERT_TO_RAW): Remove.
1544         (REGISTER_VIRTUAL_TYPE): Remove.
1545         * i386-tdep.c (i386_register_convert_to_virtual): New function.
1546         (i386_register_convert_to_raw): New function.
1547         * i387-tdep.c [LD_I387] (i387_extract_floating): Remove.
1548         (i387_store_floating): Remove.
1549
1550 Sat Mar 25 18:55:57 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1551
1552         * maint.c: Re-indent.
1553
1554 Sat Mar 25 18:51:50 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1555
1556         * maint.c (_initialize_maint_cmds): Remove quoted trailing space.
1557
1558 2000-03-24  Christopher Faylor  <cgf@cygnus.com>
1559
1560         * config/mips/tm-wince.h: Fix typo which caused include of tm-mips.h to
1561         be inoperative.
1562
1563 2000-03-24  Christopher Faylor  <cgf@cygnus.com>
1564
1565         * win32-nat.c: Back out special frame walking code.  It was broken.
1566         (handle_exception): Correctly identify an illegal instruction.
1567         * config/tm-cygwin.h: Eliminate special frame handling.  Just use
1568         normal i386 handling.
1569
1570 2000-03-24  J.T. Conklin  <jtc@redback.com> 
1571  
1572         * i386/tm-nbsd.h (USE_STRUCT_CONVENTION): Define. 
1573         * i386nbsd-nat.c (i386nbsd_use_struct_convention): New function. 
1574         (fetch_core_registers): Read fp registers. 
1575         (i386nbsd_core_fns, _initialize_i386nbsd_nat): Added. 
1576  
1577 2000-03-24  Jonathan Larmour  <jlarmour@redhat.co.uk>
1578
1579         * arm-tdep.c (thumb_skip_prologue): Take function end addr argument
1580         so that we can stop searching for the prologue past the function end
1581         (arm_skip_prologue): Call thumb_skip_prologue with function end addr
1582
1583 2000-03-24  Kevin Buettner  <kevinb@redhat.com>
1584
1585         * linux-thread.c, lin-thread.c (save_inferior_pid,
1586         restore_inferior_pid): Don't do compile time comparison
1587         of TARGET_PTR_BIT and TARGET_INT_BIT.
1588
1589 Thu Mar 23 13:18:26 2000  Philippe De Muyter  <phdm@macqel.be>
1590
1591         * m68k-tdep.c (P_LINKL_FP, P_LINKW_FP): Macros renamed from P_LINK_L
1592         and P_LINK_W.
1593         (P_PEA_FP, P_MOVL_SP_FP): New macros.
1594         (P_MOVL, P_LEAL, P_MOVML): Macros renamed from P_MOV_L, P_LEA_L and
1595         P_MOVM_L.
1596         (altos_skip_prologue, isi_skip_prologue): Use P_* macros, not octal
1597         constants.
1598         (delta68_in_sigtramp): New function.
1599         (delta68_frame_args_address, delta68_frame_saved_pc): Ditto.
1600         (m68k_skip_prologue): Use P_* macros, not hex constants.
1601         (m68k_find_saved_regs): Do not expect a fixed sequence of register save
1602         instructions, but accept them in any order; use P_* macros, not octal
1603         or hex constants; recognize also `fmovemx to (fp + displacement)' and
1604         `moveml to (fp + displacement)'.
1605         * m68/tm-delta68.h (IN_SIGTRAMP): New macro.
1606         (FRAME_SAVED_PC, FRAME_ARGS_ADDRESS): Ditto.
1607         
1608 Fri Mar 24 13:44:57 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1609
1610         * MAINTAINERS: Add Fernando Nasser to testsuite maintainers. 
1611         
1612 2000-03-23  Michael Snyder  <msnyder@cleaver.cygnus.com>
1613
1614         * solib.c (open_symbol_file_object): To sneak an int argument
1615         past catch_errors, instead of casting it to a pointer, simply
1616         pass it by address.
1617
1618 2000-03-23  Jimmy Guo   <guo@cup.hp.com>
1619
1620         * gdbtypes.c (rank_function): Rank all N parameters and use correct
1621         index into the prams[] and args[] arrays.
1622
1623 2000-03-23  Fernando Nasser  <fnasser@cygnus.com>
1624
1625         From David Whedon <dwhedon@gordian.com>
1626
1627         * top.c (execute_command): Checks all commands beore executing
1628         to see if the user needs to be warned that the command is
1629         deprecated, warns user if appropriate.
1630         (add_info), (add_info_alias), (add_com) , (add_com_alias): Changed
1631         return values from void to struct cmd_list_element *.
1632         * command.c (lookup_cmd_1): Check aliases before following link 
1633         in case user needs to be warned about a deprecated alias.
1634         (deprecate_cmd): new exported function for command deprecation,
1635         sets flags and posibly a replacement string.
1636         (deprecated_cmd_warning): New exported funciton to warn user about
1637         a deprecated command. 
1638         (lookup_cmd_composition): New exported function that determines
1639         alias, prefix_command, and cmd based on a string.  This is useful
1640         is we want to full name of a command.
1641         * command.h : Added prototypes for deprecate_cmd,
1642         deprecated_warn_user and lookup_cmd_composition, added flags to
1643         the cmd_list_element structure, changed return values for
1644         add_com_* and add_info_* from void to cmd_list_element.
1645         * maint.c : (maintenance_deprecate): New function to deprecate a
1646         command.  This exists only so that the testsuite can deprecate
1647         commands at runtime and check the warning behavior.
1648         (maintenance_undeprecate) : New function, drops deprecated flags.
1649         (maintenance_do_deprecate): Actually does the (un)deprecation.
1650         (initialize_maint_cmds): Added the above new deprecate commands.
1651
1652 2000-03-22  Daniel Berlin  <dan@cgsoftware.com>
1653         * command.c (apropos_cmd_helper): New function, meat of the
1654         apropos command.
1655         (apropos_command): New apropos command to search command
1656         names/documentation for regular expressions.
1657         (_initialize_command): Add the apropos command.
1658
1659 2000-03-23  Michael Snyder  <msnyder@cleaver.cygnus.com>
1660
1661         * sol-thread.c (ps_pglobal_lookup): Change argument type from
1662         paddr_t to psaddr_t.  This mistake appears to date from an
1663         erroneous man page in Solaris 2.5 -- the correct type from the
1664         system headers has always been psaddr_t.
1665         (ps_pdread, ps_pdwrite, ps_ptread, ps_ptwrite): Ditto.
1666         (rw_common): Ditto.
1667
1668 2000-03-22  Kevin Buettner  <kevinb@redhat.com>
1669
1670         * ia64-linux-nat.c: Fix copyright.
1671         (fill_gregset): Minor formatting fix.
1672         * ia64-tdep.c (template_encoding_table, fetch_instruction,
1673         examine_prologue): Clean up some compiler warnings.
1674         (is_float_or_hfa_type_recurse, is_float_or_hfa_type, find_func_descr,
1675         find_global_pointer, find_extant_func_descr): New functions.
1676         (ia64_use_struct_convention, ia64_extract_return_value,
1677         ia64_push_arguments): Handle HFAs.
1678         (ia64_push_arguments): Find (or build) a function descriptor
1679         when given a function address.
1680         (ia64_push_return_address): Moved code for finding the
1681         global pointer into its own function, find_global_pointer ().
1682
1683 2000-03-22  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
1684
1685         * event-loop.c (handle_file_event): Run through indent.
1686
1687 2000-03-22  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
1688
1689         From  Philippe De Muyter  <phdm@macqel.be>
1690
1691         * event-loop.c (sys/types.h): File now included unconditionally.
1692         (use_poll): New variable..
1693         (gdb_notifier): poll- and select-versions merged.
1694         (add_file_handler): If HAVE_POLL, check whether poll is usable,
1695         and reset `use_poll' if not.
1696         (create_file_handler): Select poll- or select-version according to
1697         `use_poll'.
1698         (delete_file_handler, handle_file_event): Likewise.
1699         (gdb_wait_for_event, poll_timers): Likewise.
1700
1701 2000-03-22  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
1702
1703         * printcmd.c (print_scalar_formatted):  Truncate addresses to the
1704         size of a target pointer before passing them to print_address.
1705
1706 2000-03-22  Mark Kettenis  <kettenis@gnu.org>
1707
1708         * config/i386/tm-i386aix.h (I386_AIX_TARGET): Remove.
1709         * config/i386/tm-linux.h (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM):
1710         Remove
1711         * i386-tdep.c (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): New defines.
1712         (i386_extract_return_value): Rewritten.  Correctly support all
1713         floating-point types and large integer types on targets that use
1714         the standard i386 GDB register layout and return floating-point
1715         values in the FPU.
1716
1717 Wed Mar 22 15:09:34 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1718
1719         * configure.in (CONFIG_INITS): Do not append remote-nrom.c
1720
1721 2000-03-21  J.T. Conklin  <jtc@redback.com> 
1722  
1723         * i386/nbsd.mh (NATDEPFILES): Change i386b-nat.o to i386nbsd-nat.o. 
1724         * i386nbsd-nat.c: New file. 
1725  
1726         * i386/tm-nbsd.h (NUM_REGS): Removed. 
1727         (HAVE_I387_REGS): Defined. 
1728         * i386/nm-nbsd.h (FLOAT_INFO): Removed. 
1729  
1730         * tm-nbsd.h (IN_SOLIB_CALL_TRAMPOLINE): Define if not 
1731         SVR4_SHARED_LIBS. 
1732
1733 Wed Mar 22 11:18:59 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1734
1735         * MAINTAINERS: Add Jim Blandy to breakpoint maintainers.  David
1736         taylor is the Solaris/SPARC maintainer.  Add Jonathan Larmour to
1737         the write after approval list.
1738
1739 2000-03-21  Kevin Buettner  <kevinb@redhat.com>
1740
1741         * symtab.h (MAX_SECTIONS, struct section_addr_info,
1742         symbol_file_add):  Move declarations from here...
1743         * symfile.h: ...to here.
1744
1745         * solib.c (symbol_add_stub): Make symbol_file_add () aware of
1746         all section addresses, not just .text.
1747         * symfile.h, symfile.c (free_section_addr_info,
1748         build_section_addr_info_from_section_table): New functions.
1749
1750         * symfile.h (MAX_SECTIONS): Increase value to 40.
1751         * symfile.c (syms_from_objfile): Add bounds check prior to
1752         accessing ``other'' array in a section_addr_info_struct.
1753         Remove unused variable section_offsets.
1754         (add_symbol_file_command): Remove unused variable text_addr.
1755
1756 2000-03-21  Eli Zaretskii  <eliz@is.elta.co.il>
1757
1758         * breakpoint.c (bpstat_stop_status): Don't stop if a read
1759         watchpoint appears to break, but the watched value changed.
1760
1761 2000-03-21  Jim Blandy  <jimb@redhat.com>
1762
1763         * gdbarch.sh: Emit a definition and declaration for gdbarch_free,
1764         a companion to gdbarch_alloc, which allows a gdbarch init function
1765         to free partially-built gdbarch structures.
1766         * gdbarch.c, gdbarch.h: Regenerated.
1767
1768 2000-03-20  Kevin Buettner  <kevinb@redhat.com>
1769
1770         * configure.host, configure.tgt (ia64-*-linux*): New entry.
1771
1772         * gdbserver/low-linux.c (u_offsets, ia64_register_u_addr,
1773         initialize_arch): Define for IA-64.
1774         (initialize_arch): Add declaration.
1775
1776 2000-03-20  Eli Zaretskii  <eliz@is.elta.co.il>
1777
1778         * breakpoint.c (insert_breakpoints, remove_breakpoint)
1779         (bpstat_stop_status, can_use_hardware_watchpoint): Don't insert,
1780         remove, or check status of hardware watchpoints for entire structs
1781         and arrays unless the user explicitly asked to watch that struct
1782         or array.  
1783         (insert_breakpoints): Try to insert watchpoints for all the values
1784         on the value chain, even if some of them fail to insert.
1785
1786         * values.c (value_primitive_field): Set the offset in struct value
1787         we return when the field is a packed bitfield.
1788
1789 2000-03-20  Michael Snyder  <msnyder@cleaver.cygnus.com>
1790
1791         * remote.c (remote_threads_extra_info): New function.
1792         Implement the extra thread info query for "info threads".
1793         (remote_threads_info): Clean up a bit.
1794         (use_threadinfo_query, use_threadextra_query): New variables.
1795         Control whether GDB will use the new or old protocol for 
1796         thread info queries.
1797         (remote_open_1): Initialize new variables.
1798         (remote_async_open_1): Ditto.
1799         (remote_cisco_open): Ditto.
1800
1801 2000-03-20  Kevin Buettner  <kevinb@redhat.com>
1802
1803         * ia64-linux-nat.c, ia64-tdep.c, config/ia64/linux.mh,
1804         config/ia64/linux.mt, config/ia64/nm-linux.h, config/ia64/tm-ia64.h,
1805         config/ia64/tm-linux.h, config/ia64/xm-linux.h: New files.
1806
1807 2000-03-20  Kevin Buettner  <kevinb@redhat.com>
1808
1809         * utils.c (floatformat_from_doublest): Don't assume that a long
1810         will be exactly 32 bits in length.  Also...  make sure space
1811         that we're writing the float to is completely initialized to
1812         zeroes, even when the number of bits in the float is not
1813         evenly divisible by FLOATFORMAT_CHAR_BIT.
1814
1815 2000-03-20  Jim Blandy  <jimb@redhat.com>
1816
1817         * i386-linux-nat.c: No need to #include "frame.h" any more.
1818         (LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0,
1819         LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1,
1820         LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code,
1821         LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start,
1822         LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
1823         LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1,
1824         linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN,
1825         i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp,
1826         i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET,
1827         i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET,
1828         i386_linux_sigtramp_saved_sp):  Deleted.  Folks rightly pointed
1829         out that these are target-dependent, and useful in non-native
1830         configurations.  Moved to...
1831         * i386-linux-tdep.c: ... Here, a new file.
1832         * Makefile.in (ALLDEPFILES): Add i386-linux-tdep.c.
1833         (i386-linux-tdep.o): New rule.
1834         (i386-linux-nat.o): We no longer depend on frame.h.
1835         * config/i386/linux.mt (TDEPFILES): Add i386-linux-tdep.o.
1836
1837 2000-03-04  Eli Zaretskii  <eliz@is.elta.co.il>
1838
1839         * event-loop.c (top-level) [NO_FD_SET]: Deprecate this branch.
1840         Print an error at compile time if we are to use select, but FD_SET
1841         is not available.
1842         (SELECT_MASK, NBBY, FD_SETSIZE, NFDBITS, MASK_SIZE): Define only
1843         if HAVE_POLL is not defined and NO_FD_SET *is* defined.
1844         (create_file_handler) [!HAVE_POLL]: Use FD_SET and FD_CLR.
1845         (delete_file_handler) [!HAVE_POLL]: Use FD_CLR and FD_ISSET.
1846         (gdb_wait_for_event) [!HAVE_POLL]: Copy fd_set sets directly
1847         instead of using memcpy and memset.  Use FD_ISSET.
1848
1849         * config/i386/xm-go32.h (fd_mask): Remove typedef.
1850
1851 Mon Mar 20 19:58:45 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1852
1853         * command.c (_initialize_command): Document requirements for ``!''
1854         command.
1855
1856 Mon Mar 20 18:12:46 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1857
1858         From Fri 10 Mar 2000 Robert
1859         <robert.melchers@drives.eurotherm.co.uk>:
1860         * sh-tdep.c (sh_processor_type_table): Add entry for sh2.
1861
1862 Mon Mar 20 17:33:32 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1863
1864         From Thu Mar 16 16:49:27 EST 2000 John David Anglin
1865         <dave@hiauly1.hia.nrc.ca>:
1866         * configure.in (CONFIG_INITS): Don't include hpux-thread.c. Stops
1867         _initialize_hpux_thread being called twice.
1868         * configure: Regenerated.
1869
1870 2000-03-19  Eli Zaretskii  <eliz@is.elta.co.il>
1871
1872         * event-top.c (_initialize_event_loop): If instream is not
1873         connected to a terminal device, turn editing off.
1874
1875 2000-03-19  Eli Zaretskii  <eliz@is.elta.co.il>
1876
1877         Support for building GDB with DJGPP, and running the test suite on
1878         it:
1879         * config/djgpp/djconfig.sh: New file.
1880         * config/djgpp/config.sed: New file.
1881         * config/djgpp/README: New file.
1882         * config/djgpp/fnchange.lst: New file.
1883         * config/djgpp/djcheck.sh: New file.
1884
1885 2000-03-19  Eli Zaretskii  <eliz@is.elta.co.il>
1886
1887         * ser-go32.c (ports): Make the initializers complete, to pacify
1888         GCC 2.9X.
1889
1890 2000-03-17  Jim Blandy  <jimb@redhat.com>
1891
1892         * i386v-nat.c (i386_insert_nonaligned_watchpoint): Use a
1893         two-dimensional array, instead of faking it with explicit index
1894         arithmetic.
1895
1896         * linux-thread.c (linuxthreads_attach, linuxthreads_detach,
1897         linuxthreads_create_inferior): Fix typo in variable name: it's
1898         linuxthreads_exit_status, not linux_exit_status.
1899
1900         * gdb_wait.h (WSETSTOP): Pass the appropriate number of arguments
1901         to W_STOPCODE.
1902
1903         * solib.c (solib_add): Delete debugging code.
1904
1905 2000-03-17  Mark Kettenis  <kettenis@gnu.org>
1906
1907         * gdb_wait.h: add definitions of WSETSTOP and WSETEXIT for Linux.
1908         * linux-thread.c: Use WSETSTOP instead of W_STOPCODE.
1909
1910 Fri Mar 17 11:06:59 2000  Philippe De Muyter  <phdm@macqel.be>
1911
1912         * language.c (set_lang_str): Do not call `free' for a null pointer.
1913         (set_type_str, set_range_str): Ditto.
1914
1915 2000-03-16  Jim Blandy  <jimb@redhat.com>
1916
1917         * i386-linux-nat.c (i386_linux_saved_pc_after_call): Lost in the
1918         merge; reinstated.
1919
1920         * solib.c (current_sos): Be more careful about freeing the new
1921         so_list node if an error occurs.
1922
1923         * i386-tdep.c (LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0,
1924         LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1,
1925         LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code,
1926         LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start,
1927         LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
1928         LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1,
1929         linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN,
1930         i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp,
1931         i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET,
1932         i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET,
1933         i386_linux_sigtramp_saved_sp):  Deleted.  These all implement
1934         Linux-specific signal trampoline detection, and should be moved
1935         to...
1936         * i386-linux-nat.c: ... here.
1937         * config/i386/tm-linux.h (I386_LINUX_SIGTRAMP): No need to define
1938         this any more, since we're not enabling OS-specific code in a
1939         OS-independent file.
1940         
1941 2000-03-16  Eli Zaretskii  <eliz@is.elta.co.il>
1942
1943         * Makefile.in (go32-nat.o): Add prerequisites.
1944         (ALLDEPFILES): Add go32-nat.c.
1945
1946 2000-03-15  Michael Snyder  <msnyder@cleaver.cygnus.com>
1947
1948         From "Peter.Schauer" <Peter.Schauer@regent.e-technik.tu-muenchen.de>
1949         * symfile.c (reread_symbols):  Clear msymbol hash table.
1950
1951 2000-03-15  Jim Blandy  <jimb@redhat.com>
1952
1953         Deal with the inferior unloading shared objects.
1954         * solib.c (current_sos): New function, replacing find_solib.
1955         (find_solib): Deleted.
1956         (free_so): New function.
1957         (clear_solib): Call free_so, instead of writing it out.
1958         (solib_add): Rewritten: compare the inferior's current list of
1959         shared objects with GDB's list, and do the required loads and
1960         unloads.
1961         (info_sharedlibrary_command, solib_address): Don't use find_solib
1962         to walk the list of shared libraries: call solib_add, and then
1963         walk the list at so_list_head normally.
1964         * objfiles.c (free_objfile): Don't call CLEAR_SOLIB, and don't
1965         detach the core target.  These tasks are taken care of elsewhere.
1966         * target.c (remove_target_sections): New function.
1967         * target.h (remove_target_sections): New declaration.
1968
1969         * solib.c (symbol_add_stub): Check whether we've already created
1970         an objfile for this shared object first, before doing all that
1971         work to compute section addresses, etc.
1972
1973         * objfiles.c (unlink_objfile): Report an internal error if objfile
1974         doesn't occur in the object_files list.
1975
1976         * solib.c (special_symbol_handling): Delete argument; it's not
1977         used.
1978         
1979         Changes from Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
1980
1981         * solib.c (SOLIB_EXTRACT_ADDRESS):  New macro to extract addresses
1982         from solib structures. Use it throughout solib.c, get rid of all
1983         CORE_ADDR casts.
1984         (struct so_list):  Change type of lmaddr to CORE_ADDR.
1985         (first_link_map_member):  Change return value type to CORE_ADDR,
1986         update callers.
1987         (solib_add_common_symbols):  Change parameter type to CORE_ADDR,
1988         update callers.
1989         (open_symbol_file_object, find_solib):  Change type of lm variable
1990         to CORE_ADDR.
1991
1992 2000-03-15  Eli Zaretskii  <eliz@is.elta.co.il>
1993
1994         * ser-go32.c (dos_noop, dos_raw, dos_noflush_set_tty_state)
1995         (dos_print_tty_state, dos_info, _initialize_ser_dos): Convert
1996         to ISO C.  Use ATTRIBUTE_UNUSED to avoid compiler warnings.
1997         (dos_info): Avoid compiler warning when printing a ptrdiff_t.
1998
1999         * ser-go32.c (dos_get_tty_state): Fail if the (fake) handle was
2000         not opened by dos_open, but let the 3 standard handles go through
2001         unharmed.
2002
2003 2000-03-14  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
2004
2005         * eval.c (evaluate_subexp_with_coercion): Add call to
2006         check_typedef, to handle typedeffed vars correctly.
2007
2008 Mon Mar 13 21:21:41 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2009
2010         * defs.h (STREQ, STRCMP, STREQN): Document that these macros are
2011         somewhat redundant.
2012         (QUIT): Note that this can probably be replaced by a function.
2013
2014 2000-03-13  James Ingham  <jingham@leda.cygnus.com>
2015
2016         Add support for a variable object that tries to evaluate itself in 
2017         the currently selected frame, rather than in a fixed frame.
2018         
2019         * wrapper.c,h (gdb_parse_exp_1): Added a wrapper for
2020         gdb_parse_exp_1.
2021         * varobj.h: Added USE_CURRENT_FRAME to varobj_type & changed def'n 
2022         of varobj_create.
2023         * varobj.c (varobj_list): Return type indicates whether the
2024         variable's type has changed (for current frame variables).
2025         (varobj_update): Handle the case where the variable's type has
2026         changed.
2027         (delete_variable_1): Allow for deletion of variables that have not 
2028         been installed yet.
2029         (new_root_variable): Initialize use_selected_frame variable.
2030         (value_of_root): This is where most of the work to handle "current 
2031         frame" variables was added.  Most of the complexity involves
2032         handling the case where the type of the variable has changed.
2033         (varobj_create): Add a "type" argument, to tell if the
2034         variable is one of these "current frame" variables.  Also protect
2035         call to parse_exp_1 from long jumping.
2036         
2037 2000-03-13  Eli Zaretskii  <eliz@is.elta.co.il>
2038
2039         * go32-nat.c (struct env387): Remove declaration.
2040         (print_387_status, i386_go32_float_info): Remove redundant
2041         functions.
2042         (regno_mapping, sig_map, excepn_map): Add braces around inner
2043         initializers.
2044         (many functions): Use ATTRIBUTE_UNUSED to shut up the compiler;
2045         fix code which mixed signed with unsigned.
2046         (go32_resume): Use TARGET_SIGNAL_LAST instead of -1.
2047         (go32_wait): Initialize INT3_addr.
2048         (go32_fetch_registers): Extend all FP registers that are shorter
2049         than 4 bytes to 32 bits.  Support 32 standard FP registers defined
2050         on config/i386/tm-i386.h.
2051         (store_register): Support 32 FP registers.
2052         (go32_create_inferior): Don't crash if handed a NULL pointer
2053         instead of exec file name.
2054         (ignore): Remove unused function.
2055         (go32_insert_hw_breakpoint): Remove unused variables.
2056         (init_go32_ops): Set value of processing_gcc_compilation to 2.
2057
2058 Mon Mar 13 18:54:42 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2059
2060         From 2000-03-10 Daniel Berlin <dan@cgsoftware.com> Fix C++
2061         overloading, add support for seeing through references:
2062         * valops.c (find_overload_match): Handle STABS overloading for
2063         C++.
2064         (find_overload_match): Look in right place for function arguments
2065         in the debug info.
2066         (find_overload_match): Rather than giving up when we have >1
2067         perfect match, just choose one, especially since the
2068         recommendation GDB gives ("disambiguate it by specifying function
2069         signature"), is basically impossible.
2070         (check_field_in): STREQ->strcmp_iw
2071         (search_struct_field): STREQ->strcmp_iw
2072         (find_method_list): STREQ->strcmp_iw
2073         * gdbtypes.c (rank_one_type): Add ability to see through
2074         references.
2075         (rank_one_type): strcmp->strcmp_iw, because the whitespace could
2076         be different.
2077         (rank_function): Rank function properly (was doing it wrong
2078         before, comparing the wrong parts of the arrays)
2079         (rank_one_type): Change #if 0 to #ifdef DEBUG_OLOAD.
2080         * gdbtypes.h: Add REFERENCE_CONVERSION_BADNESS for "badness"
2081         associated with converting a non-reference to a reference.
2082     * eval.c (evaluate_subexp_standard): for OP_VAR_VALUE, always
2083     return full value object; for STRUCTOP_PTR, use pointer to
2084     rtti type to get member / method if objectprint is set and
2085     target type of pointer is class.
2086
2087         * gdbtypes.c (rank_one_type): Add comment on how to eliminate the
2088         #ifdef DEBUG_OLOAD.
2089         
2090 2000-03-11  Mark Kettenis  <kettenis@gnu.org>
2091
2092         * gnu-nat.c: Fix the formatting where indent misinterpreted `&' as
2093         a binary operator.
2094         (gnu_attach): Change error message for missing
2095         argument to be identical to the corresponding message in
2096         `inftarg.c'.  This makes the testsuite happy.
2097
2098 2000-03-11  Mark Kettenis  <kettenis@gnu.org>
2099
2100         * i386gnu-nat.c (gnu_store_registers): Make sure the T bit in the
2101         %eflags isn't modified.  This fixes a bug where every call to a
2102         function in the program beyond the first call would fail.
2103
2104 Fri Mar 10 11:44:55 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2105
2106         * MAINTAINERS: Devolve responsibility for domain maintenance.
2107
2108 2000-03-06  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
2109
2110         * minsyms.c (prim_record_minimal_symbol_and_info): Add comment.
2111
2112 2000-02-25  Scott Bambrough <scottb@netwinder.org>
2113
2114         * gdb.base/long_long.exp: Correct test suite failure when printing
2115         a long long value as a double on ARM platforms.
2116
2117 Thu Mar  9 14:21:07 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2118
2119         * MAINTAINERS (Core): Anthony Green is the Java - including
2120         testsuite - maintainer.  Reformat testsuite and language support
2121         sections
2122
2123 2000-03-08  Mark Kettenis  <kettenis@gnu.org>
2124
2125         * i386-tdep.c (i386_linux_saved_pc_after_call): New function.
2126         * config/i386/tm-linux.h (SAVED_PC_AFTER_CALL): Define to call
2127         i386_linux_saved_pc_after_call.
2128
2129 2000-03-06  Jim Blandy  <jimb@redhat.com>
2130
2131         From Tom Tromey <tromey@cygnus.com> and Keith Seitz <?>:
2132
2133         * minsyms.c: #include <ctype.h>, for msymbol_hash_iw.
2134         (compact_minimal_symbols): Added `objfile' argument.
2135         Put symbols in the objfile's hash table.
2136         (install_minimal_symbols): Put symbols in the objfile's demangled
2137         hash table.
2138         (lookup_minimal_symbol): Use hash table to find symbol in
2139         objfile.
2140         (msymbol_hash_iw, msymbol_hash, add_minsym_to_hash_table): New
2141         functions.
2142         (prim_record_minimal_symbol_and_info): Initialize the
2143         hash link fields of the new minimal symbol.
2144         * symtab.h (struct minimal_symbol): New fields `hash_next',
2145         `demangled_hash_next'.
2146         (msymbol_hash_iw, msymbol_hash, add_minsym_to_hash_table): Declare.
2147         * objfiles.h (MINIMAL_SYMBOL_HASH_SIZE): New define.
2148         (struct objfile): New fields `msymbol_hash',
2149         `msymbol_demangled_hash'.
2150
2151 2000-03-06  Jim Blandy  <jimb@redhat.com>
2152
2153         * solib.c (first_link_map_member): Doc fix.
2154
2155 2000-03-06  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
2156
2157         From  Eli Zaretskii  <eliz@is.elta.co.il>:
2158
2159         * event-loop.c (poll_timers): Don't compare delta.tv_sec with
2160         zero, since time_t might be unsigned.
2161
2162 2000-03-06  Mark Kettenis  <kettenis@gnu.org>
2163
2164         * i386-linux-nat.c (supply_fpregset): Mask off the reserved bits
2165         in *FPREGSETP.
2166         (convert_to_fpregset): Don't touch the reserved bits in *FPREGSETP.
2167
2168 2000-03-05  Mark Kettenis  <kettenis@gnu.org>
2169
2170         Allow GDB to run on Linux 2.0 again.
2171         * config.in: Add HAVE_PTRACE_GETREGS.
2172         * configure.in: Check if <sys/ptrace.h> defines PTRACE_GETREGS.
2173         * configure: Regenerated.
2174         * config/i386/nm-linux.h (CANNOT_FETCH_REGISTER,
2175         CANNOT_STORE_REGISTER): New defines.
2176         * i386-linux-nat.c (have_ptrace_getregs): New variable.
2177         (PTRACE_XFER_TYPE, CANNOT_FETCH_REGISTER, fetch_register,
2178         old_fetch_inferior_registers, CANNOT_STORE_REGISTER,
2179         store_register, old_store_inferior_registers): Copied over from
2180         `inptrace.c' as a temporary measure.
2181         (fetch_regs, store_regs, fetch_fpregs, store_fpregs):
2182         Conditionalize on HAVE_PTRACE_GETREGS.  Define stubs if
2183         HAVE_PTRACE_GETREGS isn't defined.
2184         (fetch_regs): Reset `have_ptrace_getregs' if ptrace call fails
2185         with EIO.
2186         (fetch_inferior_registers, store_inferior_registers): Fall back on
2187         the method use in `infptrace.c' (by calling
2188         old_fetch_inferior_registers and old_store_inferior_registers) if
2189         `have_ptrace_getregs' isn't set.
2190
2191 2000-03-05  Mark Kettenis  <kettenis@gnu.org>
2192
2193         * i386-linux-nat.c: Use elf_gregset_t and elf_fpregset_t instead
2194         of gregset_t and fpregset_t.  Those are the only names that are
2195         guaranteed to specify the right types for all supported Linux
2196         systems out there.
2197         Various doc fixes and gratitious local variable renames, all in an
2198         attempt to stress similarities between the code and unify the
2199         terminology used.  Use ISO-C all over.
2200         (regmap): Remove trailing comma.
2201         (FPREG_ADDR): Renamed from FPREGSET_T_FPREG_ADDR.
2202         (convert_to_gregset): Make static.  Remove GDB_REGS argument.  It
2203         is unnecessary and wasn't used anyway.  All callers changed.
2204         (convert_to_fpregset, convert_to_xfpregset): Likewise.
2205         (fetch_regs, store_regs): Remove unused variable `regno'.
2206         (fill_fpregs): If REGNO is not -1, only update the specified
2207         register.
2208         (fetch_core_registers): Renamed from
2209         i386_linux_fetch_core_registers.  There is no need for a unique
2210         name since the function is static anyway.
2211         (linux_elf_core_fns): Renamed from i386_linux_nat_core_functions
2212         since it is more descriptive.
2213
2214 Sun Mar  5 19:40:27 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2215
2216         * MAINTAINERS (readline/): Expand to include host maintainers.
2217
2218 2000-03-04  Mark Kettenis  <kettenis@gnu.org>
2219
2220         Fix support for Linux/i386 signal trampolines.  The old approach
2221         didn't work for Linux 2.2 and beyond, and didn't work with recent
2222         versions of the GNU C library.
2223         * i386-tdep.c (LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
2224         LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1): New defines.
2225         (linux_rt_sigtramp_code): New variable.
2226         (LINUX_RT_SIGTRAMP_LEN): New define.
2227         (i386_linux_rt_sigtramp_start): New function.  Detect start of
2228         signal trampolines for RT signals.
2229         (i386_linux_sigtramp): Removed.
2230         (i386_linux_in_sigtramp): New function.
2231         (i386_linux_sigcontext_addr): New function.  Recognize the names
2232         of the signal tranmpolines used by recent versions of the GNU C
2233         library, and add support for RT signals.
2234         (LINUX_SIGCONTEXT_PC_OFFSET, LINUX_SIGCONTEXT_SP_OFFSET):  New
2235         defines.  Moved here from config/i386/tm-linux.h.
2236         (i386_linux_sigtramp_saved_pc, i386_linux_sigtramp_saved_sp):
2237         Reimplement in terms of i386_linux_sigcontext_addr.
2238         * config/i386/tm-linux.h (LINUX_SIGCONTEXT_SIZE): Removed.
2239         (LINUX_SIGCONTEXT_PC_OFFSET, LINUX_SIGCONTEXT_SP_OFFSET):
2240         Moved to i386-tdep.c.
2241         (IN_SIGTRAMP): Redefine to call i386_linux_in_sigtramp.
2242
2243 Sat Mar  4 19:38:11 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2244
2245         By: Sat Mar 4 04:08:58 2000 Alexandre Oliva <oliva@lsd.ic.unicamp.br>
2246         * Makefile.in (all-gdbtk): Fix $srcdir to ${srcdir}.
2247
2248 Sat Mar  4 17:23:06 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2249
2250         * MAINTAINERS: Frank Ch. Eigler and Andrew Cagney co-ordinate the
2251         sim directory.
2252
2253 Sat Mar  4 16:19:31 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2254
2255         * MAINTAINERS: Add Michael Snyder and Peter Schauer to list of
2256         ``Blanket Write Privs'' maintainers.
2257
2258 Sat Mar  4 15:58:40 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2259
2260         From Sun 20 Feb 2000 Robert Lipe <robertl@sco.com>:
2261         * language.c (longest_local_hex_string_custom): Don't compile
2262         'long long' section if host doesn't have 'long long'.
2263
2264 Sat Mar  4 15:45:38 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2265
2266         * language.c (longest_raw_hex_string): Comment out.  Appears
2267         unused.
2268
2269 Sat Mar  4 13:02:09 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2270
2271         * utils.c (mcalloc), defs.h (mcalloc): Keep consistent with
2272         "mmalloc.h" which means using PTRs.
2273         (init_malloc, msavestring, mstrsave): Convert to PTR free ISO-C.
2274
2275 Sat Mar  4 11:49:21 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2276
2277         * defs.h (store_address, store_unsigned_integer, store_address):
2278         Replace PTR with void* in delcaration.
2279         * findvar.c (extract_signed_integer, extract_unsigned_integer,
2280         extract_long_unsigned_integer, extract_address,
2281         store_signed_integer, store_unsigned_integer, store_address):
2282         Convert definition to ISO-C.  Replace PTR with void*.
2283
2284 Sat Mar  4 10:57:25 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2285
2286         * defs.h (make_cleanup_func): Document as deprecated.
2287         (make_cleanup_ftype): New typedef.  Make signature consistent with
2288         other function typedefs.  Document as not be used out side of
2289         make_cleanup code. Use in make_cleanup declarations.
2290         (null_cleanup): Replace PTR with void*.
2291         
2292         * utils.c (make_cleanup, make_final_cleanup, make_run_cleanup,
2293         make_exec_cleanup, make_exec_error_cleanup, make_my_cleanup,
2294         null_cleanup): Change K&R definition to ISO-C using void* and
2295         make_cleanup_fytpe.
2296         (discard_my_cleanups): Don't cast argument to free.
2297
2298 2000-03-03  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
2299
2300         * defs.h (struct continuation_arg): Change type of field 'data'
2301         from PTR to void *.
2302
2303         * event-loop.h: Eliminate uses of PTR, use 'void *' instead.
2304
2305         * event-top.c: Ditto.
2306
2307 Fri Mar  3 15:39:34 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2308
2309         * Makefile.in (CONFIG_CLEAN, CONFIG_ALL, LN_S): Defined by
2310         configure.
2311         (SUBDIR_MI_CLEAN, SUBDIR_GDBTK_CLEAN, SUBDIR_MI_ALL,
2312         SUBDIR_GDBTK_ALL): Define.
2313         (all-gdbtk, clean-gdbtk): New targets.
2314         (all): Add CONFIG_ALL as dependency.
2315         (clean): Add CONFIG_CLEAN as dependency.
2316         
2317         * configure.in (CONFIG_ALL, CONFIG_CLEAN): Define.
2318         (LN_S): Define.  Delete GDBtk's link code.
2319
2320 Fri Mar  3 13:12:34 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2321
2322         * configure.in (ENABLE_GDBTK): Delete variable.
2323         (enable-gdbtk): Only enable gdbtk when there is a GDBTK directory.
2324         * Makefile.in: Update.
2325         * configure: Regenerate
2326
2327 2000-03-02  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
2328
2329         * config/alpha/alpha-linux.mh: Remove core-regset.o fron the
2330         NATDEPFILES list.
2331
2332 2000-03-02  Mark Kettenis  <kettenis@gnu.org>
2333
2334         * config/i386/tm-i386aix.h (NUM_FPREGS, NUM_REGS, REGISTER_BYTES):
2335         Override definitions to include the normal FPU registers.
2336         (REGISTER_CONVERTIBLE, REGISTER_CONVERT_TO_VIRTUAL,
2337         REGISTER_CONVERT_TO_RAW): Removed.  The default definitions are
2338         fine for AIX/i386.
2339         (i387_to_double, double_to_i387): Remove prototypes.
2340
2341 2000-03-02  Kevin Buettner  <kevinb@redhat.com>
2342
2343         * findvar.c (extract_floating, store_floating): Use target
2344         floating point type sizes rather host sizes to determine
2345         which conversion needs to be done.
2346
2347 2000-03-02  Nick Duffek  <nsd@cygnus.com>
2348
2349         * uw-thread.c: Apply GNU conventions to comment formatting.
2350         (deactivate_uw_thread): Call remove_thread_event_breakpoints().
2351         (uw_thread_mourn_inferior): Move remove_thread_event_breakpoints()
2352         call to deactivate_uw_thread().
2353
2354 Thu Mar  2 09:04:46 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2355
2356         * MAINTAINERS: Daniel Berlin is C++ maintainer.         
2357
2358 Thu Mar  2 08:55:35 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2359
2360         * MAINTAINERS: Mark Kettenis is the x86 architcture maintainer and
2361         a joint GNU/Linux/x86 maintainer.  Nick Duffeck and Robert Lipe
2362         share SCO/Unixware.  Nick Duffek and Peter Schauer share
2363         Solaris/x86.
2364
2365 Wed Mar  1 22:12:35 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2366         
2367         From Wed 23 Feb 2000 Fernando Nasser <fnasser@redhat.com>:
2368         * remote-sim.c (gdbsim_close): Call generic_mourn_inferior.
2369         * remote-rdi.c (arm_rdi_close): Ditto. 
2370
2371 Wed Mar  1 19:31:32 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2372
2373         * CONTRIBUTE (configure.in): Note that patches to configure are
2374         not needed.
2375
2376 2000-03-01  Mark Kettenis  <kettenis@gnu.org>
2377
2378         * MAINTAINERS: Correct my own mail address.
2379
2380 Wed Mar  1 11:26:07 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2381
2382         * MAINTAINERS: Document people with paperwork pending.
2383
2384 Wed Mar  1 00:49:06 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2385
2386         From 2000-02-28 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
2387         Make NEW_PROC_ABI interface functional on Solaris x86.
2388         * sol-thread.c (ps_lgetLDT): Rewrite to use new
2389         procfs_find_LDT_entry function from procfs.c, mostly copied from
2390         lin-thread.c.
2391         * inferior.h, procfs.c (procfs_get_pid_fd): Removed, no longer
2392         needed.
2393
2394 Wed Mar  1 00:34:55 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2395
2396         From 2000-02-26 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
2397         * config/i386/tm-i386sol2.h (MERGEPID): Define.
2398
2399 Wed Mar  1 00:06:19 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2400
2401         From 1999-08-13 J.T. Conklin <jtc@redback.com>:
2402         * config/i386/tm-i386.h (FRAME_INIT_SAVED_REGS): Replace
2403         FRAME_FIND_SAVED_REGS.
2404         (i386_frame_init_saved_regs): Replace i386_frame_find_saved_regs.
2405         * i386-tdep.c (i386_frame_init_saved_regs, i386_pop_frame):
2406         Update.
2407
2408 Tue Feb 29 23:56:41 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2409
2410         From 2000-02-23 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
2411         * objfiles.c (open_mapped_file):  Fix obsolete references to `mapped'
2412         parameter.
2413
2414 Tue Feb 29 18:47:58 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2415
2416         From 2000-02-23 Eli Zaretskii <eliz@is.elta.co.il>:
2417         * config/i386/nm-go32.h (FLOAT_INFO): Remove macro definition.
2418         (top level): Add prototypes for go32_* functions.
2419         * config/i386/tm-go32.h (I386_DJGPP_TARGET): Define.
2420         (FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC):
2421         Override definitions from tm-i386.h.
2422         (REGISTER_VIRTUAL_TYPE): Remove macro definition.
2423         * i386-tdep.c (i386_extract_return_value)
2424         [I386_AIX_TARGET || I386_GNULINUX_TARGET]: Add I386_DJGPP_TARGET
2425         to the list of targets which return FP values in FP registers.
2426
2427         * i386-tdep.c (i386_extract_return_value): Add FIXME recommending
2428         that this function be re-implemented using multi-arch.
2429
2430 Tue Feb 29 18:40:08 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2431
2432         From 2000-02-23 Eli Zaretskii <eliz@is.elta.co.il>:
2433         * utils.c [__GO32__]: Include pc.h, for prototypes of ScreenCols
2434         and ScreenRows.
2435         * ser-go32.c: Include string.h, for prototype of strncasecmp.
2436         (dpmi_regs, dpmi_sregs): Remove unused variables.
2437         (dos_flush_input): Return a value, to prevent compiler warning.
2438         * expprint.c (dump_prefix_expression): Use %ld in format and cast
2439         sizeof(union exp_element) to long, to prevent GCC from complaining
2440         about format/argument mismatch.
2441         (dump_postfix_expression): Likewise.
2442
2443 Tue Feb 29 18:09:46 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2444
2445         * arm-tdep.c: Include <ctype.h>.
2446
2447 Tue Feb 29 17:33:49 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2448
2449         From Wed, 23 Feb 2000 Fernando Nasser <fnasser@redhat.com>:
2450         * stack.c (backtrace_command_1), infrun.c (normal_stop): Check
2451         that the target's stack was valid.
2452
2453 Tue Feb 29 15:14:56 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2454
2455         From 2000-02-22 Stephane Carrez <stcarrez@worldnet.fr>:
2456         * dwarf2read.c (read_address): Read 16-bits addresses.
2457
2458 2000-02-28  Scott Bambrough <scottb@netwinder.org>
2459
2460         * arm-linux-nat.c (fetch_nw_fpe_*):
2461         Renamed to fetch_nwfpe_* to use the same naming convention
2462         as in the Linux kernel.  Modified prototype to get rid of
2463         unused parameters.
2464         (store_nw_fpe_*): Renamed to store_nwfpe_* to use the same
2465         naming convention as in the Linux kernel.  Fixed calls to 
2466         fetch_nwfpe_*.
2467         (store_fpregs): Fixed calls to store_nwfpe_*.  Removed
2468         unused variable. 
2469
2470 Mon Feb 28 18:24:32 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2471
2472         * MAINTAINERS: Transfer d30v maintainership to David Taylor.
2473
2474 2000-02-28  Christopher Faylor  <cgf@cygnus.com>
2475
2476         * win32-nat.c: Remove unneeded header.
2477         * wince.c: Ditto.
2478
2479 Mon Feb 28 13:34:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2480
2481         * wince.c: Include "gdb_wait.h" and not "wait.h".
2482
2483 Mon Feb 28 10:58:45 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2484
2485         * MAINTAINERS: Mention mmalloc.  Expand Host/Native and
2486         Target/Architecture maintainers descriptions.
2487
2488 2000-02-26  Mark Kettenis  <kettenis@gnu.org>
2489
2490         * gnu-nat.c: Include "gdbthread.h".  Include <hurd.h>.
2491         Reorder headers a bit.  Overall cleanup and minor reformatting.
2492         (MIG_SERVER_DIED): Remove define.
2493         (proc_update_sc): Add braces to silence compiler warning.
2494         (proc_steal_exc_port): Initialize err to zero.
2495         (make_proc): Add braces to silence compiler warning.
2496         (inf_validate_task_sc): Add cast to silence compiler warning.
2497         (inf_set_traced): Reorganize a bit to silence compiler warning.
2498         (inf_validate_procs): Use mach_msg_type_number_t for all thread
2499         numbers and add braces to silence compiler warning.
2500         (gnu_wait): Add prototypes for server functions and add braces to
2501         silence compiler warnings.
2502         (S_exception_raise_request): Pass subcode to inf_debug call.
2503         (gnu_write_inferior): Remove unused variable `protection_changed'.
2504         (gnu_xfer_memory): Remove unused variable `result'.
2505         (set_sig_thread_cmd): Remove unused varible `tid'.
2506         (set_signals_cmd): Remve unused variable `trace'.
2507         (add_task_commands): Provide complete prototype.  Reformat help
2508         strings a bit to make sure the first line is a full sentence.
2509         Call info_port_rights_cmd instead of info_send_rights_cmd for the
2510         "info port-rights" command.
2511         (add_thread_commands): Provide complete prototype.  Make static.
2512         Reformat help strings a bit to make sure the first line is a full
2513         sentence.
2514         (_initialize_gnu_nat): Provide complete prototype.
2515
2516 2000-02-26  Mark Kettenis  <kettenis@gnu.org>
2517
2518         Make cross-compilation for the Hurd more friendly.
2519         From Jeff Bailey <jbailey@gnu.org>:
2520         * configure.in: Use AC_CHECK_TOOL to find MiG.
2521         * Makefile.in (MIG): New variable.
2522         * config/i386/i386gnu.mh (MIG): Remove.
2523         * configure: Regenerated.
2524
2525 2000-02-26  Kevin Buettner  <kevinb@redhat.com>
2526
2527         * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Add
2528         comment explaining motivation behind this function and why
2529         the generic facilities won't work for this platform.
2530         * rs6000-tdep.c (skip_prologue): Always test to make sure
2531         that an instruction is read successfully from the target's
2532         memory.  Introduce notion of instructions which may appear in
2533         the prologue, but may not end the prologue.  Added explicit
2534         check for nop instruction.  Use memset() to zero the frame
2535         data instead of assignment from a statically allocated,
2536         uninitialized structure.
2537
2538 Sat Feb 26 17:15:16 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2539
2540         * MAINTAINERS: Chris Faylor is responsible for all MS Windows
2541         systems.  Note that Jim Blandy as maintainer for ``tracing
2542         bytecode stuff''
2543
2544 2000-02-25  Fernando Nasser  <fnasser@cygnus.com>
2545
2546         From: Thomas Zenker <thz@Lennartz-electronic.DE>
2547         * rdi-share/hsys.c: to compile under 4.4BSD derived systems (FreeBSD,
2548         NetBSD...) sys_errlist should not be declared in hsys.c.
2549         NEED_SYSERRLIST is set already by configure, so we can use it.
2550         * rdi-share/unixcomm.c: 4.4BSD derived systems define BSD, but are
2551         posix compliant and we should not work with the old compatibility
2552         stuff.  Because of that I undef BSD in case of FBSD etc and include
2553         sys/ioctl to get the flags.
2554         * rdi-share/unixcomm.c: If the TIOCEXCL flags exists set serial line
2555         for exclusive use.
2556
2557 2000-02-24  Kevin Buettner  <kevinb@redhat.com>
2558
2559         * ppc-linux-tdep.c (ppc_sysv_abi_push_arguments): Put address
2560         of return structure in r3 if necessary.
2561         (ppc_linux_memory_remove_breakpoints): New function.
2562         * rs6000-tdep.c (skip_prologue): Make sure that the cases
2563         for storing either cr or lr to the stack only handle those
2564         cases.  (I.e, don't let these cases match 0x00000000 which is
2565         found found in the shared library trampoline prior to the
2566         loading of the shared library.)
2567         * config/powerpc/tm-linux.h (ppc_linux_memory_remove_breakpoint):
2568         Declare.
2569         (MEMORY_REMOVE_BREAKPOINT): Define.
2570
2571 Wed Feb 23 23:27:48 2000  Andrew Cagney  <cagney@behemoth.cygnus.com>
2572
2573         * hppah-nat.c: Include "gdb_wait.h" instead of <wait.h>.
2574
2575 Thu Feb 24 18:42:15 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2576
2577         * configure.in (CONFIG_INSTALL, CONFIG_UNINSTALL): Set to
2578         $(SUBDIR_*_INSTALL) when so configured.
2579         * configure: Regenerate.
2580         
2581         * Makefile.in (CONFIG_INSTALL, CONFIG_UNINSTALL): Define using
2582         configure.
2583         (install-only): Add dependency on $(CONFIG_INSTALL).  Delete code
2584         installing GDBtk.
2585         (uninstall): Add dependency on $(CONFIG_UNINSTALL).
2586         (SUBDIR_MI_INSTALL, SUBDIR_MI_UNINSTALL, SUBDIR_GDBTK_UNINSTALL,
2587         SUBDIR_GDBTK_INSTALL): Define.
2588         (install-gdbtk): New target.
2589
2590 Thu Feb 24 18:19:52 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2591
2592         * configure.in (SUBDIR_MI_CFLAGS): Fix typo, wrong brace.
2593         * configure: Regenerate.
2594         
2595 2000-02-24  Christopher Faylor  <cgf@cygnus.com>
2596
2597         * configure.tgt: Add arm, mips, sh wince targets.
2598         * config/arm/tm-wince.h: New file.
2599         * config/arm/wince.mt: New file.
2600         * config/sh/tm-wince.h: New file.
2601         * config/sh/wince.mt: New file.
2602         * config/mips/tm-wince.h: New file.
2603         * config/mips/wince.mt: New file.
2604         * wince.c: New file.
2605         * wince-stub.c: New file.
2606         * wince-stub.h: New file.
2607         * sh-tdep.c: Use correct register names for Windows CE.
2608
2609 Wed Feb 23 19:01:45 EST 2000  Nicholas Duffek <nsd@cygnus.com>
2610
2611         * top.c (SIGJMP_BUF, SIGSETJMP, SIGLONGJMP): Update comments.
2612         (error_return, quit_return): Merge into catch_return pointer.
2613         (return_to_top_level): Update comment.  Longjmp to *catch_errors,
2614         and communicate reason to catch_errors via setjmp return value.
2615         (catch_errors): Always catch both quit and error, and if a catch
2616         wasn't requested by caller, throw it to the next catch_error.
2617         Replace dual longjmp buffer memcpy with single pointer change.
2618         Add FIXME for possibly adding new interface to tell caller what
2619         event was caught.  Add extensive comments.
2620         * defs.h (enum return_reason): Reserve 0 for use as initial
2621         setjmp() return value.
2622         (RETURN_MASK): New public macro to generate RETURN_MASK_* from
2623         enum return_reason.
2624         (RETURN_MASK_QUIT, RETURN_MASK_ERROR): Define using RETURN_MASK.
2625
2626 2000-02-23  Fernando Nasser  <fnasser@cygnus.com>
2627
2628         * infcmd.c (run_stack_dummy): Do not pop frame on random signal.
2629         * valops.c (_initialize_valops): Add command "set unwindonsignal".
2630         (hand_function_call): Test for unwind_on_signal and act accordingly.
2631
2632 Wed Feb 23 12:58:46 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2633
2634         * gdbarch.sh (dis_asm_read_memory): Change LEN to unsigned long.
2635         Match ../include/dis-asm.h change.
2636         * gdbarch.h: Regenerate.
2637         * corefile.c (dis_asm_read_memory): Update.
2638
2639 Mon Feb 21 13:57:27 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2640
2641         * configure.in (CONFIG_INITS): Fix typo, was CONFIG_INIT.
2642         (ENABLE_CFLAGS): Move initialization to start of file.
2643         (enable-gdbmi): Add new configure option --enable-gdbmi.  When
2644         selected and an ${srcdir}/mi directory is present enable MI
2645         interface.
2646
2647         * configure: Regenerate.
2648         
2649         * Makefile.in (SUBDIR_MI_OBS, SUBDIR_MI_SRCS, SUBDIR_MI_DEPS,
2650         SUBDIR_MI_INITS, SUBDIR_MI_LDFLAGS, SUBDIR_MI_CFLAGS): New macros.
2651         (CONFIG_OBS, CONFIG_SRCS, CONFIG_DEPS, CONFIG_INITS,
2652         CONFIG_LDFLAGS): New macros.  Initialized by autoconf via
2653         @CONFIG...@.
2654         (INTERNAL_LDFLAGS, CDEPS, LINTFILES, DEPFILES, SOURCES,
2655         INIT_FILES): Use $(CONFIG_...) instead of @CONFIG...@.
2656
2657         * mi: New directory. MI interface to GDB.
2658
2659         * defs.h (interpreter_p): Declare when UI_OUT.
2660         * top.c (gdb_init): When interpreter_p, check that the interpreter
2661         was recognized by one of the linked in interpreters.
2662         * main.c (interpreter_p): Define.
2663         (captured_main): When UI_OUT, check for ``-i <interpreter>'' option.
2664         * event-top.c (display_gdb_prompt): When interpreter_p, assume
2665         interpreter displays prompt.
2666
2667         * breakpoint.c (print_it_typical, watchpoint_check,
2668         print_one_breakpoint, mention): When MI include additional
2669         target status information.
2670         * infrun.c (print_stop_reason, normal_stop): Ditto.
2671
2672 2000-02-22  Jim Blandy  <jimb@redhat.com>
2673
2674         * gdbarch.sh: Make the `default' field really default to zero, as
2675         documented.
2676
2677         Bring COERCE_FLOAT_TO_DOUBLE under gdbarch's control.
2678         * valops.c (COERCE_FLOAT_TO_DOUBLE): Rework definition to be
2679         more function-like.
2680         (default_coerce_float_to_double, standard_coerce_float_to_double):
2681         New functions.
2682         (value_arg_coerce): Adjust for new definition.
2683         * value.h (default_coerce_float_to_double,
2684         standard_coerce_float_to_double): New declarations for the above.
2685         * gdbarch.sh (coerce_float_to_double): New entry, replacing macro.
2686         * gdbarch.c, gdbarch.h: Regenerated.
2687         * tm-alpha.h, tm-fr30.h, tm-m32r.h, tm-mips.h, tm-hppa.h,
2688         tm-rs6000.h, tm-sh.h, tm-sparc.h (COERCE_FLOAT_TO_DOUBLE): Change
2689         definitions.
2690         * mips-tdep.c (mips_coerce_float_to_double): Supply our own custom
2691         function here.
2692         (mips_gdbarch_init): Install that as our coerce_float_to_double
2693         function.
2694
2695 2000-02-22  Kevin Buettner  <kevinb@redhat.com>
2696
2697         * ppc-linux-nat.c (supply_gregset, supply_fpregset): Add return
2698         type.
2699         * ppc-linux-tdep.c (ppc_linux_at_sigtramp_return_path): Add
2700         forward declaration.
2701
2702         * ppc-linux-tdep.c (ppc_linux_frame_saved_pc): Handle case
2703         where the next frame is a signal handler caller.
2704
2705         * config/powerpc/tm-linux.h (PUSH_ARGUMENTS): Remove extraneous
2706         undef.
2707         (tm-linux.h): Include.
2708         (tm-sysv4.h): Don't include (directly).  config/tm-linux.h will
2709         include this file for us.
2710         (REALTIME_LO, REALTIME_HI): Don't define.  These are defined by
2711         config/tm-linux.h for us.
2712         (SOFUN_ADDRESS_MAYBE_MISSING): Define.
2713
2714 2000-02-21  Kevin Buettner  <kevinb@redhat.com>
2715
2716         * Makefile.in (ppc-linux-nat.c, ppc-linux-tdep.c): New files.
2717         (ppc-linux-nat.o, ppc-linux-tdep.o): Add dependencies.
2718         * configure.tgt (powerpc-*-linux*): Separate from powerpc-*-eabi
2719         and like targets.
2720
2721         * ppc-linux-nat.c, ppc-linux-tdep.c, config/powerpc/linux.mt,
2722         config/powerpc/nm-linux.h, config/powerpc/tm-linux.h: New files.
2723         * config/powerpc/xm-linux.h: Substantially revised for native
2724         port.
2725         * config/powerpc/linux.mh (NAT_FILE): Redefine to be nm-linux.h.
2726         (NATDEPFILES): Update list to reflect the fact that we can
2727         now debug natively.
2728
2729         * rs6000-tdep.c, config/rs6000/tm-rs6000.h
2730         (rs6000_frameless_function_invocation, rs6000_frame_saved_pc):
2731         Renamed; The former names were lacking the rs6000_ prefix.
2732         * rs6000-tdep.c (rs6000_frame_saved_pc): Call FRAME_CHAIN
2733         instead of rs6000_frame_chain.
2734         (rs6000_frame_chain): Call FRAMELESS_FUNCTION_INVOCATION instead
2735         of rs6000_frameless_function_invocation.
2736
2737 2000-02-21  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
2738
2739         From Philippe De Muyter  <phdm@macqel.be>
2740
2741         * event-loop.c (handle_file_event): In case of poll, enable
2742         printing of informational message if an error/exception is
2743         detected on the file descriptor.
2744
2745 2000-02-21  Jim Kingdon  <kingdon@redhat.com>
2746
2747         * MAINTAINERS (Misc): Clarify that yes, anyone can edit web pages.
2748
2749 Mon Feb 21 12:50:57 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2750
2751         * buildsym.c: Include "language.h" and "expression.h" for
2752         longest_local_hex_string_custom.
2753
2754 Mon Feb 21 11:17:18 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2755
2756         * gdbarch.sh: Include <gdb_wait.h> instead of <wait.h>.
2757         * gdbarch.c: Already updated by Wed Feb 9 18:59:16 2000 Andrew
2758         Cagney <cagney@b1.cygnus.com>.
2759
2760 Mon Feb 21 11:03:01 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2761
2762         * MAINTAINERS: Update: IA-64 - Kevin Buettner; ARM - Fernando
2763         nasser, Jim Ingham and Scott Bambrough; GNU/Linux ARM - Scott
2764         Bambrough; event loop - Elena Zannoni; SDS and RDI/APD protocol -
2765         to Fernando Nasser and Jim Ingham; KOD - Fernando Nasser; MI -
2766         Andrew Cagney, Elena Zannoni and Fernando Nasser; Web pages - Jim
2767         Kingdon.
2768         * MAINTAINERS: Add Nick Clifton to write after approval list.
2769         
2770 Mon Feb 21 10:30:39 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2771
2772         * MAINTAINERS: Add note on multiple maintainers.
2773
2774 2000-02-19  Philippe De Muyter  <phdm@macqel.be>
2775
2776         * cli-out.c (cli_table_header): Type of parameter `alignment' is
2777         `enum ui_align', not `int'.
2778         (cli_field_string, cli_field_skip): Likewise.
2779
2780 2000-02-18  Jim Blandy  <jimb@redhat.com>
2781
2782         From Jimmy Guo <guo@cup.hp.com>:
2783         * buildsym.h (add_free_pendings): Declare.
2784         * buildsym.c (add_free_pendings): New function.
2785         (make_blockvector): 32x64 fix using longest_local_hex_string().
2786         (start_subfile): initialize variable 'subfile'.
2787
2788 2000-02-18  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
2789
2790         * remote.c (remote_async_detach): Use target_mourn_inferior(), to
2791         make sure that all is cleaned up after we disconnect from the
2792         target.
2793         (remote_detach): Ditto.
2794
2795 2000-02-17  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2796
2797         From Rodney Brown  <RodneyBrown@pmsc.com>
2798         * ui-out.c (ui_out_set_flags): Fix typo, removing warning and
2799         potentially harming mistake.
2800
2801 2000-02-17  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2802
2803         * arm-tdep.c: Use header file instead of extern declarations for
2804         the {get,set}_arm_regname* functions.
2805
2806 2000-02-16  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2807
2808         * configure.in: Replaces obsolete gdbtk-variable.c with
2809         gdbtk-varobj.c.
2810         * configure: Regenerate.
2811         * Makefile.in: Remove obsolete/extraneous references to
2812         gdbtk-var* files.
2813
2814 2000-02-16  Mark Kettenis  <kettenis@gnu.org>
2815
2816         * target.c (do_target_signal_to_host): Do not use REALTIME_LO in
2817         the conversion of the signal number.  TARGET_SIGNAL_REALTIME_33 is
2818         33 by definition, whereas REALTIME_LO might be 32 on systems that
2819         have SIG32 such as Linux.  Make sure that the signal number
2820         returned is within the range specified by REALTIME_LO and
2821         REALTIME_HI.
2822
2823 2000-02-16  Mark Kettenis  <kettenis@gnu.org>
2824
2825         * configure: Regenerated.
2826
2827 2000-02-16  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2828
2829         * arm-tdep.c (set_disassembly_flavor, arm_othernames,
2830         _initialize_arm_tdep): Allows the user to choose between any of
2831         the flavors available for the disassembly to be used in the "info
2832         reg" command and elsewhere in gdb.  It prevents having to maintain
2833         this information in two places by using the data kept in the
2834         opcodes directory.
2835
2836 2000-02-09  Mark Kettenis  <kettenis@gnu.org>
2837
2838         * configure.in: Check for lwpid_t, psaddr_t, prgregset_t and
2839         prfpregset_t in <sys/procfs.h>.
2840         * config.in: Add HAVE_LWPID_T, HAVE_PSADDR_T, HAVE_PRGREGSET_T,
2841         HAVE_PRFPREGSET_T.
2842         * gdb_proc_service.h: Only provide typedefs for lwpid_t, psaddr_t,
2843         prgregset_t and prfpregset_t if they are not already present.
2844
2845 Wed Feb 16 19:00:02 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2846
2847         From 2000-01-26 Rodney Brown <RodneyBrown@pmsc.com>:
2848         * procfs.c: Define MERGEPID if not defined. For osf4.0e.
2849
2850 2000-02-15  Jason Molenda  (jsm@bugshack.cygnus.com)
2851
2852         * Makefile.in (diststuff): Run 'diststuff' in doc/ subdir, not
2853         'do-doc'.
2854
2855 2000-02-15  Kevin Buettner  <kevinb@redhat.com>
2856
2857         Changes for AIX 4.3:
2858         * rs6000-tdep.c (rs6000_fix_call_dummy): Set TOC register
2859         to correct value for generic dummy frames.  When using
2860         generic dummy frames, don't attempt to write TOC value or
2861         function to call into the call dummy.
2862         (rs6000_push_arguments): Adapt USE_GENERIC_DUMMY_FRAMES
2863         code to also handle the PowerOpen ABI.
2864         (ppc_push_return_address): Enable for all ports.
2865         * config/powerpc/tm-ppc-aix.h (USE_GENERIC_DUMMY_FRAMES,
2866         PUSH_DUMMY_FRAME, PUSH_RETURN_ADDRESS, GET_SAVED_REGISTER, 
2867         CALL_DUMMY_BREAKPOINT_OFFSET, CALL_DUMMY_LOCATION,
2868         CALL_DUMMY_ADDRESS, CALL_DUMMY_START_OFFSET): Override defaults
2869         provided by generic RS6000 definitions so that call dummies
2870         are implemented using generic dummy frames instead.
2871
2872         * rs6000-nat.c (store_inferior_registers): Call exec_one_dummy_insn()
2873         prior to changing the stack pointer via ptrace().  Also, ignore
2874         attempts to store to undefined registers that are less than
2875         NUM_REGS.
2876
2877         * rs6000-tdep.c (DUMMY_FRAME_SIZE): Change size of the dummy
2878         frame from 436 to 448 to account for alignment padding.
2879         (rs6000_push_arguments): Obtain actual register size instead
2880         of assuming the register is 4 bytes long.  [There's still
2881         more work to be done to totally remove the 4 byte assumption,
2882         however.]  Make sure the stack is 16 byte aligned as required
2883         by the PowerOpen ABI.  Also, make sure that small structures
2884         passed in registers are properly aligned within the register.
2885
2886 2000-02-15  Jesper Skov  <jskov@cygnus.co.uk>
2887
2888         Patch applied by Kevin Buettner <kevinb@redhat.com>
2889         
2890         * rs6000-tdep.c (skip_prologue): skip copying of argument
2891         registers to local variable registers.
2892
2893 2000-02-14  Jim Kingdon  <kingdon@redhat.com>
2894
2895         * elfread.c (elf_symtab_read): Revert changes by Amit S. Kale.  A
2896         sym->section->index number is not a SECT_OFF_* code.
2897
2898 Tue Feb 15 12:07:30 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2899
2900         * MAINTAINERS (write after approval): Add H.J. Lu.
2901
2902 2000-02-14  Nick Clifton  <nickc@cygnus.com>
2903
2904         * sh-tdep.c: Remove extraneous code.
2905
2906 2000-02-14  Amit S. Kale  <akale@veritas.com>
2907
2908         * elfread.c (elf_symtab_read): Move the use of sym to after where
2909         it is set.
2910         Checked in by Jim Kingdon  <kingdon@redhat.com>
2911
2912 Mon Feb 14 15:39:01 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2913
2914         * MAINTAINERS: Make Nick Duffek the UnixWare threads maintainer.
2915
2916 Mon Feb 14 15:20:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2917
2918         From 1999-11-24 Jason Merrill <jason@casey.cygnus.com>:
2919         * dwarf2read.c: (die_is_declaration): New fn.
2920         (read_structure_scope): Use it.
2921
2922         * dwarf2read.c: (die_is_declaration): Convert to ISO-C.
2923
2924 2000-02-10  J.T. Conklin  <jtc@redback.com>
2925
2926         * config/i386/nbsd.mt (GDBSERVER_DEPFILES): Add low-nbsd.o
2927         * configure.tgt (i[3456]86-*-netbsd*): add gdbserver to
2928         configdirs.
2929         * gdbserver/low-nbsd.c: New file.
2930         
2931         * gdbserver/Makefile.in: convert to autoconf.
2932         * gdbserver/configure.in: likewise.
2933         * gdbserver/configure: generate.
2934
2935 Sun Feb 13 11:21:00 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2936
2937         * CONTRIBUTE: New file.  How to contribute to GDB.
2938
2939 Sun Feb 13 10:34:48 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2940
2941         * MAINTAINERS: Add Eli Zaretskii to djgpp maintiners.  Add Kevin
2942         Buettner to powerpc maintainers.  Make Kevin Buettner the
2943         GNU/LINUX PPC native maintainer.  Add J.T. Conklin, Jim Kingdon
2944         and Jason Molenda to write after aproval list.
2945
2946 Sun Feb 13 10:18:44 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2947
2948         * MAINTAINERS: Reformat.  Separate into check-in categories.
2949
2950 Sat Feb 12 01:08:21 EST 2000  Nicholas Duffek <nsd@cygnus.com>
2951
2952         * uw-thread.c: Remove __FUNCTION__ GNUism.
2953
2954 2000-01-17  Amit S. Kale  <akale@veritas.com>
2955
2956         * elfread.c (elf_symtab_read): Use offset for the section in which a
2957         symbol resides, instead of .text section for calculating address of a
2958         symbol.
2959         Checked in by Jim Kingdon  <kingdon@redhat.com>
2960
2961 2000-02-10  Mark Kettenis  <kettenis@gnu.org>
2962
2963         * gnu-nat.c: Remove hackery to include <bits/waitflags.h>.  It is
2964         no longer necessary now we have gdb_wait.h.
2965
2966 2000-02-09  Mark Kettenis  <kettenis@gnu.org>
2967
2968         * gnu-nat.c (proc_string): Make global.
2969         (do_mach_notify_dead_name): Suppress dead name notifications if we
2970         know that the task is dead.
2971
2972 1999-12-13  Mark Kettenis  <kettenis@gnu.org>
2973
2974         * gnu-nat.c (inf_validate_task_sc): Get task info via proc server
2975         instead of directly from the kernel.  Add some hackery to make
2976         sure that the info isn't influenced by suspension of the task in
2977         the proc server itself.
2978
2979 2000-02-10  Jim Kingdon  <kingdon@redhat.com>
2980
2981         * defs.h (MERGEPID): Added.  Patch submitted by Andrew Hobson and
2982         approved by Michael Snyder.
2983
2984 2000-02-09  Mark Kettenis  <kettenis@gnu.org>
2985
2986         * linux-thread.c: Include defs.h before gdb_wait.h.
2987
2988 Wed Feb  9 18:59:16 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2989
2990         * Makefile.in (wait_h): Delete macro.  Update all dependencies
2991         specifying gdb_wait.h instead.
2992
2993         * ser-unix.c, ser-pipe.c, remote.c, remote-udi.c, remote-sds.c,
2994         remote-os9k.c, remote-es.c, remote-rdp.c, remote-vx960.c,
2995         remote-vx.c, remote-st.c, remote-nindy.c, remote-mm.c,
2996         convex-xdep.c, convex-tdep.c, target.c, win32-nat.c, standalone.c,
2997         remote-vxmips.c, remote-vxsparc.c, remote-vx68.c, remote-vx29k.c,
2998         remote-sim.c, remote-rdi.c, remote-mips.c, remote-eb.c,
2999         remote-e7000.c, remote-bug.c, remote-array.c, remote-adapt.c,
3000         ppc-bdm.c, ocd.c, monitor.c, m3-nat.c, linux-thread.c,
3001         infttrace.c, lin-thread.c, infptrace.c, gnu-nat.c, gdbarch.c,
3002         fork-child.c, command.c: Include "gdb_wait.h" instead of <wait.h>
3003         or <sys/wait.h>.
3004         * nindy-share/nindy.c, nindy-share/Onindy.c: Ditto.
3005
3006         * gdb_wait.h: New file.  Based on ../include/wait.h. Include
3007         <sys/wait.h> or <wait.h> and then define any missing WIF macros.
3008
3009 Wed Feb  9 01:14:54 2000  Andrew Cagney  <cagney@amy.cygnus.com>
3010
3011         * config/d10v/tm-d10v.h (NO_EXTRA_ALIGNMENT_NEEDED): Define.
3012         * config/d10v/tm-d10v.h (STACK_ALIGN): Define.
3013         (d10v_stack_align): Declare.
3014         * d10v-tdep.c (d10v_stack_align): Define.
3015
3016 1999-08-23  J.T. Conklin  <jtc@redback.com>
3017
3018         * top.c (remote_timeout): Change default to 2.  Add comment
3019         explaining history of changes to the default value.
3020         * remote.c (_initialize_remote): Remove code that adds set/
3021         show remotetimeout, as that's also done in top.c
3022
3023 1999-10-18  J.T. Conklin  <jtc@redback.com>
3024
3025         * m32r-stub.c, sparcl-stub.c, sparclet-stub.c (handle_exception):
3026         Return E01 instead of P01 when 'P' command fails.
3027
3028 2000-02-05  J.T. Conklin  <jtc@redback.com>
3029
3030         * remote.c (putpkt_binary): Handle NAK from target stub.
3031
3032 2000-02-08  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
3033
3034         * configure.in: Remove the addition of sol-thread.c to the
3035         CONFIG_INITS list. This caused problems with init.c, because
3036         sol-thread.c would be grepped twice for _initialize_* functions.
3037         * configure: Ditto.
3038         * Makefile.in: Add FIXME for init.c.
3039
3040 2000-02-07  Jim Kingdon  <kingdon@redhat.com>
3041
3042         Clean up compiler warnings:
3043         * bcache.h, bcache.c, c-valprint.c, coffread.c, stabsread.c,
3044         stack.c, valprint.c: Change variables to unsigned.
3045         * bcache.c: Rearrange to avoid warnings about variables not being set.
3046         * c-lang.c, ch-lang.c, f-lang.c, m2-lang.c: Include valprint.h
3047         rather than declaring print_max and repeat_count_threashold
3048         ourselves (incorrectly).
3049         * valprint.h: Do declare repeat_count_threashold.
3050         * ch-exp.c: Use default case for internal error.
3051         * findvar.c: Don't omit argument type.
3052         * symtab.c: Remove unused variable.
3053
3054 2000-02-04  Jim Blandy  <jimb@redhat.com>
3055
3056         * c-typeprint.c (remove_qualifiers): New function.
3057         (c_type_print_base): Use it to remove qualifiers from C++
3058         qualified names, not strrchr.
3059
3060         * c-typeprint.c (c_type_print_base): Recognize type conversion
3061         operators by calling is_type_conversion_operator.
3062         (is_type_conversion_operator): New function.
3063
3064 2000-02-04  Nick Clifton  <nickc@cygnus.com>
3065
3066         * config/arm/tm-arm.h (LOWEST_PC): Define.
3067
3068 2000-02-04  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
3069
3070         * infrun.c (resume): Make just one call to target_resume(), instead
3071         of four: set up correct parameters in all the cases ahead of time,
3072         and do call at the end.
3073
3074 2000-02-04  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
3075
3076         * config/powerpc/tm-ppc-eabi.h: Define
3077         SOFUN_ADDRESS_MAYBE_MISSING.
3078
3079 2000-02-04  Fernando Nasser  <fnasser@totem.to.cygnus.com>
3080
3081         * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy
3082         frames (revisited).
3083
3084 Fri Feb  4 22:42:36 2000  Andrew Cagney  <cagney@b1.cygnus.com>
3085
3086         * Makefile.in (INIT_FILES): Append CONFIG_INITS
3087         * configure.in (CONFIG_INIT): Initialize.
3088         (links): Link srcdir/gdbtk/library to gdbtcl2.
3089         * gdbtcl2: Moved to gdbtk/library.
3090         ChangeLog-gdbtk, gdbtk-cmds.c, gdbtk-hooks.c, gdbtk-variable.c,
3091         gdbtk-varobj.c, gdbtk-wrapper.c, gdbtk-wrapper.h, gdbtk.c,
3092         gdbtk.h: Moved to gdbtk/generic.
3093
3094 2000-02-03  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
3095
3096         * printcmd.c (build_address_symbolic): New function. Returns all
3097         the parts that are necessary to print an address in a symbolic
3098         form.
3099         (print_address_symbolic): Split into a printing part and an
3100         information building part, build_address_symbolic().
3101
3102         * defs.h (build_address_symbolic): Export.
3103
3104 2000-02-03  Jim Blandy  <jimb@redhat.com>
3105
3106         * dwarf2read.c (decode_locdesc): Add support for the DW_OP_bregx
3107         opcode.
3108
3109 2000-02-02  Fernando Nasser  <fnasser@totem.to.cygnus.com>
3110
3111         * arm-tdep.c (arm_push_arguments): Fix passing of floating point
3112         arguments on dummy frames.
3113
3114 2000-02-02  Fernando Nasser  <fnasser@totem.to.cygnus.com>
3115
3116         * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy frames.
3117         (arm_pop_frame): Account fr dummy frames (as opposed to real ones).
3118
3119 2000-02-01  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
3120
3121         * remote.c (getpkt_sane): New function. It is the old getpkt(),
3122         which now returns a timeout indication.
3123         (getpkt): New function. Wrapper for getpkt_sane(), so that return
3124         value can still be ignored.
3125
3126 Tue Feb  1 18:47:31 2000  Andrew Cagney  <cagney@b1.cygnus.com>
3127
3128         * top.c (print_gdb_version): Print ``UI_OUT'' when configured with
3129         UI_OUT.
3130
3131 Tue Feb  1 00:17:12 2000  Andrew Cagney  <cagney@b1.cygnus.com>
3132
3133         * ui-file.c, ui-file.h: Rename gdb-file.h, gdb-file.c.  Rename
3134         ``struct gdb_file'' to ``struct ui_file''.  Delete typedef
3135         GDB_FILE.
3136         
3137         * Makefile.in: Update.
3138
3139         * ax-gdb.c, ax-general.c, ax.h, buildsym.c, c-lang.c, c-lang.h,
3140         c-typeprint.c, c-valprint.c, ch-lang.c, ch-lang.h, ch-typeprint.c,
3141         ch-valprint.c, command.c, command.h, convex-tdep.c, corefile.c,
3142         cp-valprint.c, d10v-tdep.c, d30v-tdep.c, defs.h, expprint.c,
3143         expression.h, f-lang.c, f-lang.h, f-typeprint.c, f-valprint.c,
3144         frame.h, gdb-events.sh, gdb-file.c, gdb-file.h, gdbcmd.h,
3145         gdbtypes.h, hppa-tdep.c, jv-lang.c, jv-lang.h, jv-typeprint.c,
3146         jv-valprint.c, language.c, language.h, m2-lang.c, m2-lang.h,
3147         m2-typeprint.c, m2-valprint.c, m3-nat.c, main.c, monitor.c,
3148         printcmd.c, pyr-tdep.c, remote-mips.c, remote-sim.c, remote-udi.c,
3149         remote.c, scm-lang.c, scm-lang.h, scm-valprint.c, ser-e7kpc.c,
3150         ser-go32.c, ser-mac.c, ser-ocd.c, ser-unix.c, ser-unix.h,
3151         serial.c, serial.h, stack.c, symfile.c, symmisc.c, tahoe-tdep.c,
3152         target.c, target.h, top.c, top.h, typeprint.c, typeprint.h,
3153         utils.c, v850ice.c, valprint.c, valprint.h, value.h,
3154         config/pa/tm-hppa.h: Update.
3155         * cli-out.c, cli-out.h, ui-out.c, ui-out.h, varobj.c: Update.
3156
3157 2000-01-31  Jason Molenda  (jsm@bugshack.cygnus.com)
3158
3159         * config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh,
3160         config/i386/i386dgux.mh, config/i386/i386sol2.mh,
3161         config/i386/i386v4.mh, config/i386/i386v42mp.mh,
3162         config/i386/ncr3000.mh, config/m68k/m68kv4.mh,
3163         config/m88k/delta88v4.mh, config/mips/irix4.mh,
3164         config/mips/irix5.mh, config/mips/mipsv4.mh,
3165         config/powerpc/solaris.mh (NATDEPFILES): Change references to
3166         proc_api.o, proc_events.o, proc_flags.o, and proc_why.o to
3167         proc-api.o, proc-events.o, proc-flags.o, and proc-why.o.
3168
3169 Mon Jan 31 17:14:52 2000  Andrew Cagney  <cagney@b1.cygnus.com>
3170
3171         * top.c (fputs_unfiltered_hook): Moved to tui/tui-file.c.
3172
3173         * main.c (captured_main): Only use the legacy tui_file code when
3174         linking in older code such as the TUI.
3175
3176         * gdb-file.h, gdb-file.c: New files.
3177         * utils.c, defs.h (struct gdb_file, gdb_file_new, gdb_file_delete,
3178         null_file_isatty, null_file_rewind, null_file_put,
3179         null_file_flush, null_file_write, null_file_fputs,
3180         null_file_delete, gdb_file_data, gdb_flush, gdb_file_isatty,
3181         gdb_file_rewind, gdb_file_put, gdb_file_write, fputs_unfiltered,
3182         set_gdb_file_flush, set_gdb_file_isatty, set_gdb_file_rewind,
3183         set_gdb_file_put, set_gdb_file_write, set_gdb_file_fputs,
3184         set_gdb_file_data, struct accumulated_gdb_file,
3185         do_gdb_file_xstrdup, gdb_file_xstrdup, struct mem_file):
3186         mem_file_new, mem_file_delete, mem_fileopen, mem_file_rewind,
3187         mem_file_put, mem_file_write, struct stdio_file): stdio_file_new,
3188         stdio_file_delete, stdio_file_flush, stdio_file_write,
3189         stdio_file_fputs, stdio_file_isatty, stdio_fileopen, gdb_fopen):
3190         Moved to gdb-file.h and gdb-file.c.
3191         * utils.c (enum streamtype, struct tui_stream, tui_file_new,
3192         tui_file_delete, tui_fileopen, tui_sfileopen, tui_file_isatty,
3193         tui_file_rewind, tui_file_put, tui_file_fputs,
3194         tui_file_get_strbuf, tui_file_adjust_strbuf, tui_file_flush,
3195         fputs_unfiltered_hook):
3196         Moved to tui/tui-file.c and tui/tui-file.h.
3197         
3198         * Makefile.in (COMMON_OBS): Add gdb-file.o, tui-file.o.
3199         (tui-file.o, gdb-file.o): Add dependencies.
3200         (corefile.o, main.o, utils.o, simmisc.o): Update dependencies.
3201         * main.c: #include tui/tui-file.h.
3202
3203 2000-01-28  Fred Fish  <fnf@cygnus.com>
3204
3205         * findvar.c (value_from_register): Special case handling of D10V
3206         pointer values fetched from registers.
3207
3208 2000-01-28  Fernando Nasser  <fnasser@totem.to.cygnus.com>
3209
3210         * arm-tdep.c (thumb_skip_prologue, thumb_scan_prologue): Add
3211         support for new style thumb prologues.
3212
3213 2000-01-28  Nick Clifton  <nickc@redhat.com>
3214
3215         * arm-tdep.c: Remove extraneous dash at start of strings
3216         introduced in previous delta.
3217
3218 2000-01-27  Nick Clifton  <nickc@redhat.com>
3219
3220         * arm-tdep.c: Replace uses of arm_toggle_renames() with
3221         parse_arm_disassembler_option().
3222
3223 2000-01-27  Jim Blandy  <jimb@cygnus.com>
3224
3225         * symtab.c (decode_line_1): Don't let commas that are within
3226         quotes or parenthesis terminate the line spec.  Don't use pp when
3227         removing the final double quote of a double-quoted string.  Don't
3228         forget to skip the opening double quote.  I have no clue whether
3229         this change is correct; probably we've just moved this function
3230         from one buggy place to another buggy place, and never came within
3231         an outhouse whiff of correctness.
3232         (find_toplevel_char): New function.
3233
3234 2000-01-27  Fernando Nasser  <fnasser@totem.to.cygnus.com>
3235
3236         * arm-tdep.c (arm_push_arguments): Set the thumb mode bit when
3237         passing the pointer to a thumb function as an argument.
3238
3239 2000-01-27  Fernando Nasser  <fnasser@totem.to.cygnus.com>
3240
3241         * remote-rdi.c (arm_rdi_mourn_inferior): Make sure breakpoints
3242         are reinserted for another run.
3243
3244 2000-01-27  Fernando Nasser  <fnasser@totem.to.cygnus.com>
3245
3246         * cli-out.c (cli_filed_string): Test for NULL string.
3247
3248 2000-01-27  Fernando Nasser  <fnasser@totem.to.cygnus.com>
3249
3250         * infcmd.c (run_stack_dummy): Account for a random signal stopping
3251         the inferior as well as breakpoints being hit while performing an
3252         inferior function call.
3253         * valops.c (hand_function_call): Ditto.
3254
3255 2000-01-27  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
3256
3257         From  Mark Kettenis  <kettenis@gnu.org>
3258
3259         * config/i386/tm-i386gnu.h (THREAD_STATE_FLAVOR): Define to
3260         i386_REGS_SEGS_STATE.
3261         (HAVE_I387_REGS): Define.
3262         (FLOAT_INFO): Remove.
3263         * i386gnu-nat.c: Almost completely rewritten to use new i386
3264         register layout and `float info' implementation.
3265         * gnu-nat.c (inf_update_procs, proc_get_state, proc_string):
3266         Move prototypes from here.
3267         * gnu-nat.h: To here.
3268
3269 2000-01-24  Kevin Buettner  <kevinb@redhat.com>
3270
3271         * utils.c (get_field, put_field): Fix buffer underruns and
3272         overruns.  Also, handle case where total_len is not evenly
3273         divisible by 8.
3274         (getfield): Make sure zeroing of unwanted bits occurs even
3275         when bit field to extract does not straddle two or more
3276         bytes.
3277
3278 2000-01-23   Christopher Faylor  <cgf@cygnus.com>
3279
3280         * defs.h: Add gdb_thread_select declaration.
3281
3282 2000-01-23  Kevin Buettner  <kevinb@redhat.com>
3283
3284         * linux-thread.c (_initialize_linuxthreads): Make sure that
3285         linuxthreads_block_mask does not block SIGCHLD.
3286
3287 2000-01-20  Fernando Nasser  <fnasser@totem.to.cygnus.com>
3288
3289         * rdi-share/devsw.c (openLogFile): On cygwin, set the log mode to
3290         text so that new lines work properly.
3291
3292 2000-01-18  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
3293
3294         * proc-utils.h: New file. Export functions from proc-*.c.
3295
3296         * proc_api.c: Rename to:
3297         * proc-api.c: New file. Add include of proc-utils.h.
3298
3299         * proc_events.c: Rename to:
3300         * proc-events.c: New file.
3301
3302         * proc_flags.c: Rename to:
3303         * proc-flags.c: New file.
3304
3305         * proc_why.c: Rename to:
3306         * proc-why.c: New file. Add include of proc-utils.h.
3307
3308         * procfs.c: Add includes of gdbthread.h, sys/wait.h, signal.h,
3309         ctype.h, proc-utils.h.
3310         (find_procinfo_or_die): Add braces to avoid ambiguous else clause.
3311         (open_procinfo_files): Conditionalize local variable tmp, to avoid
3312         compiler warnings.
3313         (proc_iterate_over_mappings): Conditionalize local vars mapfd and
3314         pathname.
3315         (procfs_wait): Adjust format in some printf_filetered calls to
3316         avoid compiler warnings.
3317         (make_signal_thread_runnable): Ifdef 0. The calls to this function
3318         are also ifdef'd 0 .
3319         (procfs_resume): Add parentheses around '&&' operation.
3320         (procfs_set_exec_trap): Remove unused variable.
3321         (info_proc_cmd): Add braces to avoid ambiguous else clause.
3322
3323         * Makefile.in (procfs.o, proc-api.o, proc-events.o, proc-flags.o,
3324         proc-why.o): Update dependencies.
3325
3326         * config/sparc/sun4sol2.mh (NATDEPFILES): Change proc_*.o files to
3327         proc-*.o.
3328
3329 2000-01-17  Jason Molenda  (jsm@bugshack.cygnus.com)
3330
3331         * configure.in (NEW_PROC_API): Fix Unixware-matching regexp.
3332         Fix from Robert Lipe <robertl@sco.com>.
3333         * configure: Regenerated.
3334
3335 2000-01-17  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
3336
3337         * stack.c (print_frame_info_base): Break up into the frame info
3338         (location) printing part and the rest (source line printing).
3339         (print_frame): New function. Take care of printing the location
3340         information.
3341         Update copyright.
3342
3343         * infrun.c (normal_stop): Use enum values rather than integers for the
3344         source_flag to be passed to show_and_print_stack_frame().
3345         Update copyright.
3346         
3347         * frame.h (print_what): New enum for 'source' argument to
3348         print_frame_info_base(). Use this instead of obscure numbers.
3349         Update copyright.
3350         
3351 Sun Jan 16 17:58:00 2000  David Taylor  <taylor@texas.cygnus.com>
3352
3353         * event-top.c (stdin_event_handler): call quit_command rather than
3354         exit -- run cleanups, give target code a chance to say goodbye to
3355         the target.  Fixes bug where the inferior processes were left
3356         around on Solaris (and probably elsewhere) by the testsuite.
3357
3358 2000-01-14  Mark Salter  <msalter@cygnus.com>
3359
3360         * v850-tdep.c (v850_target_architecture_hook): Setup correct
3361         machine id for disassembly.
3362
3363 2000-01-13  Jim Blandy  <jimb@cygnus.com>
3364
3365         * i386-linux-nat.c (fill_gregset): Pass the correct arguments to
3366         convert_to_regset, when regno indicates a specific register.
3367
3368 Thu Jan 13 23:34:17 EST 2000  Nicholas Duffek <nsd@cygnus.com>
3369
3370         * uw-thread.c: Document libthread.so debugging interface.  Minor
3371         comment and formatting tweaks.
3372         (DEBUG): #define as 0 instead of 1.
3373         (CALL_BASE): Include function name in error msg.
3374         (libthread_stub): Adjust inferior_pid after thread exit.
3375         (uw_thread_create_inferior): Deactivate uw_thread_ops before
3376         asking procfs_ops to create inferior.
3377         (libthread_init): Don't return nonlocally on error.
3378
3379 2000-01-12  Fernando Nasser  <fnasser@totem.to.cygnus.com>
3380
3381         * rdi-share/ardi.c (negotiate_params): Fix initialization of static
3382         variable.
3383
3384 2000-01-12  Fernando Nasser  <fnasser@totem.to.cygnus.com>
3385
3386         * remote-rdi.c (arm_rdi_open): Call arm-rdi-close() to make sure
3387         both sides are on the same state.
3388
3389 2000-01-12  Fernando Nasser  <fnasser@totem.to.cygnus.com>
3390
3391         * rdi-share/serdrv.c (find_baud_rate): Fix entries for 57600 and
3392         115200 (minor syntax mistake).
3393
3394 2000-01-12  Jim Blandy  <jimb@cygnus.com>
3395
3396         * config/sparc/tm-sun4sol2.h (MERGEPID): Provide a definition for
3397         this here, to go along with the definitions of PIDGET and TIDGET.
3398
3399 2000-01-12  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
3400
3401         * thread.c (do_captured_thread_select): New function. Switch
3402         current thread, safely from within catch_errors().
3403         (gdb_thread_select): New function. Switch threads safely.
3404         (thread_command): Use gdb_thread_select().
3405         Include ui-out.h.
3406         (do_captured_list_thread_ids): New function.
3407         (gdb_list_thread_ids): New function.
3408
3409         * defs.h (gdb_thread_select, gdb_list_thread_ids): Export.
3410
3411 2000-01-11  Christopher Faylor <cgf@cygnus.com>
3412
3413         * configure.in: Avoid linking -limagehlp unless it's a native build.
3414         * configure: Regenerate.
3415         * thread.cc (add_thread): Clear private data pointer here or suffer
3416         strange behavior when it is checked for NULL later.
3417
3418 2000-01-09  Christopher Faylor  <cgf@cygnus.com>
3419
3420         * win32nat.c (handle_exceptions): Handle various arithmetic exceptions.
3421         * configure.in: Add an additional library to cygwin link.
3422         * configure: Regenerate.
3423
3424         Patch from Egor Duda <deo@logos-m.ru>:
3425         * coffread.c (coff_symfile_read): Reinstate ability to recognize "pe"
3426         type.
3427
3428 2000-01-07  Michael Snyder  <msnyder@cleaver.cygnus.com>
3429
3430         * uw-thread.c: New file to support UnixWare user-mode threads:
3431         contributed by Nickolas Duffek  <nsd@cygnus.com>.
3432         * target.h (struct target_ops): New vector, to_extra_thread_info,
3433         allows back-ends to give extra details in info thread display.
3434         (target_extra_thread_info): define new macro.
3435         (target_find_new_threads): simplify macro.  Cleanup comments.
3436         * target.c (to_extra_thread_info): default and inherit new vector.
3437         (cleanup_target): eliminate PARAMS, break up long lines,
3438         provide default definition for to_extra_thread_info, and
3439         to_find_new_threads.  Default to_thread_alive and to_query
3440         to return_zero, not target_ignore (they each return int not void).
3441         (debug_to_find_new_threads): new debug entry.
3442         (setup_target_debug): add debug_to_find_new_threads.
3443         * gdbthread.h: export struct thread_info, find_thread_pid, and
3444         iterate_over_threads.  Add comments.  Eliminate PARAMS.  Update
3445         copyright.  Add new private data pointer for use by target back-ends.
3446         * thread.c (struct thread_info): move definition to gdbthread.h.
3447         (find_thread_pid): new exported function for thread lookup.
3448         (iterate_over_threads): new exported function for applying
3449         arbitrary operations to threads.  Update copyright to 2000.
3450         (info_threads_command): use new target_extra_thread_info vector
3451         to display extra information about each thread (if implemented).
3452         * config/i386/tm-i386v42mp.h: remove obsolete #defines for procfs.
3453         Add defines for PIDGET, etc.
3454         * config/i386/tm-i386sol2.h: ditto.
3455         * config/sparc/tm-sun4sol2.h: ditto.
3456         * config/i386/i386v42mp.mh: add uw-thread.o to NATDEPFILES.
3457         * testsuite/gdb.threads/pthreads.exp: Try to link with -lthread
3458         if -lpthread and -lpthreads fail.
3459
3460         * procfs.c: (PIDGET, TIDGET, MERGEPID): change default to no-op.
3461         (proc_flags): combine flags that UnixWare splits into two locations.
3462         (proc_modify_flag): add support for PR_KLC (kill on last close).
3463         (proc_[un]set_kill_on_last_close): new functions.
3464         
3465 2000-01-07  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
3466
3467         * infrun.c (normal_stop): Print out thread id when we stop.
3468
3469 2000-01-06  Fernando Nasser  <fnasser@totem.to.cygnus.com>
3470
3471         * remote.c (remote_open_1): Fix message so it does not imply a
3472         specific syntax for serial ports, as it is OS dependent.
3473         (remote_async_open_1): Ibid.
3474         (init_remote_ops): Ibid.
3475
3476 2000-01-06  Fernando Nasser  <fnasser@totem.to.cygnus.com>
3477
3478         * rdi-share/serdrv.c (SerialOpen): Use speed from "-b" argument or
3479         "set remotebaud" command (if set) when no speed is specified on
3480         the "target rdi" command.
3481
3482 2000-01-06  Fernando Nasser  <fnasser@totem.to.cygnus.com>
3483
3484         * rdi-share/serdrv.c (find_baud_rate): Add entries for 57600 and
3485         115200.
3486         (baud_options[]): Ibid.
3487
3488 2000-01-06  Fernando Nasser  <fnasser@totem.to.cygnus.com>
3489
3490         * rdi-share/unixcomm.c: Fix SERIAL_PREFIX so it matches the prefix
3491         used by each operating system.
3492
3493 2000-01-06  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
3494
3495         * breakpoint.c (until_break_command): Add an argument for the
3496         continuation, the beginning of the cleanups set up by this
3497         command.
3498         (until_break_command_continuation): Do cleanups until the one
3499         passed in as argument instead of doing all of them.
3500
3501         * infcmd.c (finish_command_continuation): Expect a new argument,
3502         which indicates up to where to do cleanups. Update calls to
3503         do_exec_cleanups to use this marker, instead of ALL_CLEANUPS.
3504         (finish_command): Add another argument for the continuation: the
3505         starting cleanup for this command.
3506
3507 2000-01-05  Fernando Nasser  <fnasser@totem.to.cygnus.com>
3508
3509         From Grant Edwards <grante@visi.com> (original patch from Thomas
3510         Zenker ):
3511         * rdi-share/ardi.c: Allow interruption of interruptible
3512         targets with a <CNTL-C>.
3513
3514 2000-01-04  Fernando Nasser  <fnasser@totem.to.cygnus.com>
3515
3516         * rdi-share/etherdrv.c (fetch_ports): Send extra words on request
3517         to control port to accommodate some versions of Angel.
3518
3519 2000-01-04  Fernando Nasser  <fnasser@totem.to.cygnus.com>
3520
3521         * rdi-share/devsw.c (dumpPacket): Fix source of channel information.
3522         Add interpretation for C Support Library packets.
3523
3524 2000-01-04  Fernando Nasser  <fnasser@totem.to.cygnus.com>
3525
3526         * rdi-share/devsw.c (DevSW_Close): Remove const from argument that
3527         is now being modified.
3528         * rdi-share/devsw.h: Adjust declaration of the above funtion.
3529
3530 For older changes see ChangeLog-99
3531 \f
3532 Local Variables:
3533 mode: change-log
3534 left-margin: 8
3535 fill-column: 74
3536 version-control: never
3537 End: