1 2009-03-18 Doug Evans <dje@google.com>
3 * expprint.c (dump_raw_expression): Print note if non-NULL.
5 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
8 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
10 * Makefile.in: Update license to GPLv3.
11 * ada-exp.y: Update license to GPLv3.
12 * ada-lex.l: Update license to GPLv3.
13 * c-exp.y: Update license to GPLv3.
14 * cp-name-parser.y: Update license to GPLv3.
15 * darwin-nat-info.c: Update license to GPLv3.
16 * f-exp.y: Update license to GPLv3.
17 * gdb_thread_db.h: Update license to GPLv3.
18 * hppanbsd-nat.c: Update license to GPLv3.
19 * hppanbsd-tdep.c: Update license to GPLv3.
20 * hppaobsd-tdep.c: Update license to GPLv3.
21 * jv-exp.y: Update license to GPLv3.
22 * m2-exp.y: Update license to GPLv3.
23 * objc-exp.y: Update license to GPLv3.
24 * p-exp.y: Update license to GPLv3.
25 * reply_mig_hack.awk: Update license to GPLv3.
26 * reverse.c: Update license to GPLv3.
27 * xtensa-xtregs.c: Update license to GPLv3.
29 2009-03-18 Pedro Alves <pedro@codesourcery.com>
31 * remote.c (remote_close): Don't call generic_mourn_inferior.
32 (remote_mourn_1): Call generic_mourn_inferior after closing the
35 2009-03-18 Pedro Alves <pedro@codesourcery.com>
37 * remote.c (remote_start_remote): Add missing call to
38 init_wait_for_inferior in non-stop mode.
40 2009-03-18 Pedro Alves <pedro@codesourcery.com>
42 * breakpoint.c (bpstat_should_step): Only consider software
43 watchpoints that have a location.
45 2009-03-17 Joel Brobecker <brobecker@adacore.com>
47 Add a target_ops parameter to the to_kill method in struct target_ops.
49 * target.h (struct target_ops): Add a "target_ops *" parameter to
51 (target_kill): Remove macro. Add declaration.
52 * target.c (debug_to_kill): Delete, no longer necessary.
53 (target_kill): New function.
54 (update_current_target): Stop inheriting the to_kill method.
55 Do not de_fault it to no_process either.
56 (setup_target_debug): Do not set current_target.to_kill.
57 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
58 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
59 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
62 2009-03-17 Doug Evans <dje@google.com>
64 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
65 glibc 2.3.2 and earlier.
67 2009-03-17 Joel Brobecker <brobecker@adacore.com>
69 * frame.c (get_prev_frame_1): Do not perform the inner_frame
70 sanity check if this_frame is not NORMAL.
71 (frame_id_inner): Update the description of this function.
73 2009-03-17 Hui Zhu <teawater@gmail.com>
75 * stack.c: Change the introduce of "disassemble-next-line".
77 2009-03-17 Pedro Alves <pedro@codesourcery.com>
79 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
82 2009-03-17 Hui Zhu <teawater@gmail.com>
84 * stack.c: Include valprint.h.
85 (disassemble_next_line): New enum.
86 (show_disassemble_next_line): New function. Show the current
87 value of disassemble-next-line.
88 (gdb_disassembly_stub_args): New struct for argument passing
89 between function do_gdb_disassembly and function
91 (gdb_disassembly_stub): New function. Helper for
93 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
94 the exception from the gdb_disassembly because it will be
95 broken by filter sometime.
96 (print_frame_info): If disassemble-next-line is set to auto
97 or on and doesn't have the line debug messages for $pc,
98 output the next instruction.
99 If disassemble-next-line is set to on and there is line debug
100 messages, output assembly codes for next line.
101 (_initialize_stack): Make the "set disassemble-next-line"
102 command an auto-boolean command. Change its class to
103 class_stack. Place it in the top level set list. Extend help
104 to describe the auto mode.
106 2009-03-17 Pedro Alves <pedro@codesourcery.com>
108 * infrun.c (normal_stop): Don't overwrite old_chain.
110 2009-03-16 Joel Brobecker <brobecker@adacore.com>
112 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
113 which is undefined, by call to regcache_invalidate, which should
114 do what the original author wanted to do.
116 2009-03-16 Joel Brobecker <brobecker@adacore.com>
118 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
119 (mips_create_inferior): Likewise.
121 2009-03-16 Joel Brobecker <brobecker@adacore.com>
123 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
125 2009-03-16 Joel Brobecker <brobecker@adacore.com>
127 * darwin-nat.c (darwin_resume): Fix a compiler warning when
128 building on x86_64-darwin.
130 2009-03-16 Tristan Gingold <gingold@adacore.com>
132 * configure.tgt: Add handling for x86_64-darwin.
134 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
136 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
138 2009-03-15 Joel Brobecker <brobecker@adacore.com>
140 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
141 Use the ops parameter to get to the target beneath, rather than
142 using the current_target global. Using the current_target global
143 was an unintended accident.
145 2009-03-15 Joel Brobecker <brobecker@adacore.com>
147 Fix an error happening while loading symbols from a core file
150 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
151 to detect whether we're debugging a core file or not.
153 2009-03-15 Joel Brobecker <brobecker@adacore.com>
155 Modernize the aix-thread later by getting rid of the base_target
156 global. This brings back to life the AIX port which was otherwise
157 crashing all the time.
159 * aix-thread.c (base_target): Delete.
160 (pd_enable): Do not set base_target.
161 (aix_thread_attach): Use find_target_beneath instead of base_target.
162 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
163 (aix_thread_fetch_registers, aix_thread_store_registers),
164 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
165 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
166 (aix_thread_kill): Delete. Does not seem necessary.
167 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
169 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
171 * stack.c (return_command <retval_exp>): New variables retval_expr
172 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
173 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
174 if RETURN_TYPE is NULL.
177 2009-03-14 Pedro Alves <pedro@codesourcery.com>
179 * remote.c (PACKET_qAttached): New.
180 (remote_query_attached): New.
181 (remote_add_inferior): Add new `attached' argument. Handle it.
182 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
183 -1 to remote_add_inferior in new parameter.
184 (extended_remote_attach_1): Adjust to pass 1 to
185 remote_add_inferior in the new parameter.
186 (extended_remote_create_inferior_1): Adjust to pass 0 to
187 remote_add_inferior in the new parameter.
188 (_initialize_remote): Add "set/show remote query-attached-packet"
191 2009-03-13 Tom Tromey <tromey@redhat.com>
193 * symtab.c (lookup_symbol_in_language): Use a cleanup.
195 2009-03-13 Doug Evans <dje@google.com>
197 * exceptions.h: Clean up some comments on catch_exceptions usage.
198 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
201 2009-02-17 Joel Brobecker <brobecker@adacore.com>
203 The following patch helps getting rid of a warning inside solib-som.c.
205 * source.c (source_full_path_of): Constify parameter filename.
206 * defs.h (source_full_path_of): Update declaration accordingly.
208 2009-03-12 Joel Brobecker <brobecker@adacore.com>
210 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
211 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
212 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
214 2009-03-12 Joel Brobecker <brobecker@adacore.com>
216 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
217 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
219 2009-03-12 Joel Brobecker <brobecker@adacore.com>
221 * ada-tasks.c (ada_task_is_alive): Move up and make static.
222 * ada-lang.h (ada_task_is_alive): Remove declaration.
224 2009-03-12 Jerome Guitton <guitton@adacore.com>
226 * ada-lang.c (ada_delta): Change the type of numerators and
227 denominators to DOUBLEST, as they may not fit into a long.
228 (scaling_factor): Ditto.
230 2009-03-12 Jerome Guitton <guitton@adacore.com>
232 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
234 2009-03-12 Joel Brobecker <brobecker@adacore.com>
236 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
237 types, if we are unable to determine the actual symbol type
238 from its tag, then use the static approximation instead.
240 2009-03-12 Joel Brobecker <brobecker@adacore.com>
242 Fix crash printing packed record with packed array.
244 * ada-lang.c (ada_modulus_from_name): New function.
245 (ada_modulus): In the case where the type length is bigger than
246 the size of the type used to hold the bounds, try determining
247 the modulus from the type name.
248 (ada_value_primitive_packed_val): Fix bug in the computation of
249 ntarg causing an out-of-buffer invalid access.
251 2009-03-12 Joel Brobecker <brobecker@adacore.com>
253 Fix segfault when printing short_integer'last.
255 * ada-lang.c (ada_find_any_type): Search in the primitive types
256 if a symbol could not be found.
258 2009-03-12 Joel Brobecker <brobecker@adacore.com>
260 * ada-tasks.c (task_states,long_task_states): Add new states
261 Activating and Acceptor_Delay_Sleep. Update the description
262 of state Acceptor_Sleep.
264 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
266 Fix a build failure on Darwin following some changes in
267 the profile of some target_ops methods.
269 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
271 (darwin_stop_inferior, darwin_detach): Likewise.
273 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
275 Include token in ^running notification for CLI commands.
277 * mi/mi-main.c (mi_execute_command): Set current_token here.
278 (mi_cmd_execute): Do not set current_token here.
280 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
284 * mi/mi-main.c (mi_print_timing_maybe): New.
285 (captured_mi_execute_command): Simplify. Output timings to
287 (mi_execute_async_cli_command): Do not print timings.
288 * mi/mi-main.h (mi_print_timing_maybe): Declare.
289 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
291 2009-03-12 Jerome Guitton <guitton@adacore.com>
293 * xcoffread.c (process_linenos): Check if the line in the
294 include table refers to the main source file and, if so,
295 add them to the main subfile.
297 2009-03-12 Joel Brobecker <brobecker@adacore.com>
299 Fix a build failure on AIX introduced after a change in the profile
300 of some of the "methods" in the target_ops structure.
301 * aix-thread.c: Add missing target_ops parameter throughout.
303 Implement Ada task switching on AIX.
304 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
305 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
307 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
309 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
310 value_mark and value_free_to_mark.
311 * objfiles.c (free_objfile): Call objfile_free_data before
314 2009-03-10 Hui Zhu <teawater@gmail.com>
316 * disasm.c (gdb_disassembly): Remove unused argument
318 * disasm.h (gdb_disassembly): Ditto.
319 * cli/cli-cmds.c (print_disassembly): Ditto.
320 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
322 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
324 * solib.c (solib_contains_address_p): New function.
325 (solib_name_from_address): Use it.
326 * printcmd.c (display_uses_solib_p): Use it.
327 * solib.h (solib_contains_address_p): Declare it.
329 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
331 * varobj.c (free_variable): Call value_free.
333 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
336 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
337 Move the variable `macinfo_type' out of the loop. Create a new
338 processing pass before the current one to pre-create `current_file'.
339 New complaint on misplaced zero/non-zero definitions/includes.
340 Skip first DW_MACINFO_start_file with `at_commandline' set.
342 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
344 * solib.c (reload_shared_libraries): Give
345 inferior a chance to reset solib breakpoint.
348 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
350 * windows-nat.c (dr): Redefine to use largest possible integer which
352 (cygwin_set_dr): Avoid coercion.
354 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
356 * windows-nat.c (windows_create_inferior): Implement --tty handling on
359 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
361 Rename solib_address to solib_name_from_address.
362 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
363 (disable_breakpoints_in_unloaded_shlib): Update.
364 * printcmd.c (display_uses_solib_p): Likewise.
365 * stack.c (print_frame): Likewise.
369 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
371 * printcmd.c (do_one_display): Reparse exp_string.
372 (display_uses_solib_p): New function.
373 (clear_dangling_display_expressions): New function.
374 (_initialize_printcmd): Add observer.
375 * solib.c (no_shared_libraries): Swap order of calls to
376 clear_solib and objfile_purge_solibs.
378 2009-03-05 Joel Brobecker <brobecker@adacore.com>
380 Implement the target-specific part of Ada tasking support
383 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
384 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
386 2009-03-05 Joel Brobecker <brobecker@adacore.com>
388 Get rid of the global "base_target" and use "find_target_beneath"
389 to find the underlying target.
390 * dec-thread.c (base_target): Delete.
391 (enable_dec_thread): Remove assignement to base_target.
392 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
393 (dec_thread_fetch_registers, dec_thread_store_registers)
394 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
395 Update the function profile if necessary.
396 Use find_target_beneath to call the same method but from
397 the underlying target, removing the need for "base_target".
399 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
400 Fix a copy/paste error in a few debug traces...
402 * solib-osf.c (init_so): Use a simpler method for computing
403 the size of lm_info structure. This also gets rid of warning
404 emitted by the compiler.
406 2009-03-05 Pedro Alves <pedro@codesourcery.com>
408 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
409 duplicates of permanent breakpoints.
411 2009-03-04 Pedro Alves <pedro@codesourcery.com>
413 * inferior.h (notice_new_inferior): Declare.
414 * infcmd.c (notice_new_inferior): New.
415 * remote.c (remote_add_inferior, remote_add_thread): New.
416 (notice_new_inferiors): Rename to...
417 (remote_notice_new_inferior): ... this. Add RUNNING argument.
418 Use remote_add_thread instead of add_thread, passing it the
419 RUNNING argument. Add an inferior with remote_add_inferior. If
420 we just learned about an inferior, call notice_new_inferior.
421 (record_currthread): Adjust.
422 (remote_threads_info): Adjust to use remote_notice_new_inferior.
423 (remote_start_remote, extended_remote_attach_1): Use
425 (process_stop_reply): Adjust. Call remote_notice_new_inferior
426 after handling expedited registers and watchpoint state.
427 (extended_remote_create_inferior_1): Use remote_add_inferior.
429 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
431 * infcmd.c (registers_info): Remove register number case.
433 2009-03-03 Pedro Alves <pedro@codesourcery.com>
435 * top.c (quit_target): Check for target_has_execution before
436 killing or detaching from inferiors.
438 2009-03-02 Joel Brobecker <brobecker@adacore.com>
440 Remove some unused routines.
442 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
444 * ada-lang.c (ada_task_list_iterator_ftype)
445 (iterate_over_live_ada_tasks): Delete.
446 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
449 2009-03-01 Doug Evans <dje@google.com>
451 * symtab.c: Remove trailing whitespace throughout the file.
452 (expand_line_sal): Fix some typos and whitespace.
454 * Makefile.in (clean): rm -f $(DEPDIR)/*.
456 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
457 (init.c): signals/ -> common/.
459 * target.h (target_signal_to_string,target_signal_to_string)
460 (target_signal_from_name,target_signal_to_host_p)
461 (target_signal_from_host,target_signal_to_host): Move to ...
462 * common/gdb_signals.h: ... here. New file.
463 * common/signals.c: Moved here from signals/signals.c.
464 #include gdb_signals.h, remove #include of target.h in gdb case.
465 (target_signal_from_command,default_target_signal_to_host)
466 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
468 Include thread ID in target_wait debugging output.
469 * infrun.c (print_target_wait_results): New function.
470 (wait_for_inferior,fetch_inferior_event): Call it.
472 2009-02-27 Pedro Alves <pedro@codesourcery.com>
474 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
476 * linux-thread-db.c (thread_get_info_callback): Build the ptid
477 using the pid stored in proc_handle.ptid.
478 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
479 (check_for_thread_db, thread_db_detach, check_event)
480 (thread_db_mourn_inferior, find_new_threads_callback)
481 (thread_db_find_new_threads_1): Adjust.
482 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
483 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
485 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
487 * valprint.c (read_string): Rework clean-up logic. Use
488 free_current_contents to clean-up buffer.
490 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
492 * MAINTAINERS: Update e-mail address.
494 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
496 * python/python-utils.c (python_string_to_unicode): Always return
498 (python_string_to_target_string): Decrement transient python
500 (python_string_to_host_string): Likewise.
502 2007-02-26 Pedro Alves <pedro@codesourcery.com>
504 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
505 call to super_fetch_registers.
506 (mips64_linux_store_registers): Pass `ops' to call to
507 super_store_registers.
509 2009-02-25 Doug Evans <dje@google.com>
511 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
514 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
515 disabled_shlib_breaks, unused.
517 * printcmd.c (build_address_symbolic): Fix comment.
519 2009-02-25 Hui Zhu <teawater@gmail.com>
521 * cli/cli-script.c (define_command): Add _() to query.
522 * gnu-nat.c (inf_validate_task_sc): Ditto.
523 * infcmd.c (kill_if_already_running): Ditto.
524 (jump_command): Ditto.
525 (attach_command): Ditto.
526 * inflow.c (kill_command): Ditto.
527 * infrun.c (handle_command): Ditto.
528 * maint.c (maintenance_dump_me): Ditto.
529 * memattr.c (mem_delete_command): Ditto.
530 * monitor.c (monitor_interrupt_query): Ditto.
531 * nto-procfs.c (interrupt_query): Ditto.
532 * printcmd.c (undisplay_command): Ditto.
533 * remote-mips.c (mips_kill): Ditto.
534 * remote.c (interrupt_query): Ditto.
535 * solib-irix.c (irix_open_symbol_file_object): Ditto.
536 * solib-osf.c (osf_open_symbol_file_object): Ditto.
537 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
538 * solib-som.c (som_open_symbol_file_object): Ditto.
539 * solib-svr4.c (open_symbol_file_object): Ditto.
540 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
541 * target.c (kill_or_be_killed): Ditto.
542 * tracepoint.c (delete_trace_command): Ditto.
543 * top.c (quit_confirm): Add _() to s that will be used
546 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
548 Fix windows-nat.c compilation failure.
550 * windows-nat.c (windows_thread_alive): Fix forward declaration.
551 (get_windows_debug_event): Add ops parameter to call to windows_resume.
553 2009-02-23 Pedro Alves <pedro@codesourcery.com>
555 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
557 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
559 * symtab.c (find_line_symtab): Initialize exact to avoid
562 2009-02-23 Pedro Alves <pedro@codesourcery.com>
564 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
565 `ops' to recursive call.
567 2009-02-23 Pedro Alves <pedro@codesourcery.com>
569 * corelow.c (get_core_registers): Adjust.
570 (core_file_thread_alive): Rename to...
571 (core_thread_alive): ... this.
572 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
573 (init_core_ops): Adjust.
574 (coreops_suppress_target): Delete.
575 (_initialize_corelow): Unconditionally add core_ops.
576 * procfs.c: Include "inf-child.h".
577 (procfs_ops): Delete.
578 (init_procfs_ops): Delete. Reimplement as...
579 (procfs_target): ... this, inheriting from inf-child.
580 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
581 (procfs_prepare_to_store): Delete.
582 (procfs_store_registers, procfs_resume): Adjust.
583 (procfs_open): Delete.
584 (procfs_suppress_run): Delete.
585 (procfs_can_run): Delete.
586 (procfs_mourn_inferior): Adjust.
587 (procfs_init_inferior): Add target_ops parameter. Adjust.
588 (procfs_create_inferior): Don't pass procfs_init_inferior to
589 fork_inferior. Instead call it after fork_inferior returns.
590 (procfs_find_new_threads): Adjust.
591 (_initialize_procfs): Adjust to use procfs_target instead of
593 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
594 (lwp_to_thread): Use target_thread_alive.
595 (sol_thread_open): Delete.
596 (sol_thread_attach): Delete.
597 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
598 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
599 to use find_target_beneath.
600 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
601 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
602 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
603 (check_for_thread_db): New.
604 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
605 (sol_thread_new_objfile): Call check_for_thread_db.
606 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
607 (sol_thread_can_run): Delete.
608 (sol_thread_alive): Adjust to use find_target_beneath.
609 (sol_thread_stop): Delete.
610 (rw_common): Use target_write_memory or target_read_memory.
611 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
612 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
613 (solaris_pid_to_str): Remove check for libthread_db initialization
615 (sol_find_new_threads): Remove check for libthread_db
616 initialization failing, or for an invalid inferior_ptid. Adjust
617 to use find_target_beneath.
618 (sol_core_open, sol_core_close, sol_core_detach,
619 sol_core_files_info, sol_find_memory_regions,
620 sol_make_note_section, ignore): Delete.
621 (init_sol_thread_ops): Make it a thread_stratum target. Remove
622 unneeded callback settings.
623 (init_sol_core_ops): Delete.
624 (_initialize_sol_thread): No longer call init_sol_core_ops, set
625 procfs_suppress_run, or hack with core_ops.
627 * target.h (struct target_ops): Add a target_ops * parameter to
628 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
629 and to_find_new_threads.
630 (target_fetch_registers, target_store_registers)
631 (target_thread_alive, target_find_new_threads): Redeclare as
634 * target.c (update_current_target): Do not inherit or de_fault
635 to_resume, to_fetch_registers, to_store_registers,
636 to_thread_alive, to_find_new_threads.
637 (target_resume): Adjust.
638 (target_thread_alive, target_find_new_threads): New.
639 (debug_to_resume, debug_to_fetch_registers): Delete.
640 (target_fetch_registers): New.
641 (debug_to_store_registers): Delete.
642 (target_store_registers): New.
643 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
644 (setup_target_debug): Adjust.
646 * gdbcore.h (core_ops): Delete declaration.
648 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
649 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
650 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
651 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
652 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
653 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
654 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
655 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
656 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
657 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
658 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
659 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
660 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
661 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
663 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
664 * gdbarch.h, gdbarch.c: Regenerate.
666 * sol2-tdep.c: Include "inferior.h".
667 (sol2_core_pid_to_str): New.
668 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
670 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
671 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
672 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
673 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
675 2009-02-22 Doug Evans <dje@google.com>
677 * exec.c (exec_file_attach): Fix comment.
679 2009-02-22 Pedro Alves <pedro@codesourcery.com>
681 Silence a few -Wmissing-prototypes warnings.
684 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
686 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
687 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
688 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
689 (_initialize_amd64nbsd_tdep): ... this.
690 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
691 (_initialize_arm_linux_tdep): Declare.
692 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
693 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
694 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
695 * avr-tdep.c (avr_return_value): Make it static.
696 (avr_frame_unwind_cache): Ditto.
697 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
698 (bsd_uthread_solib_loaded): Ditto.
699 (bsd_uthread_solib_unloaded): Ditto.
700 (bsd_uthread_target): Ditto.
701 (_initialize_bsd_uthread): Declare.
702 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
703 (cris_frame_unwind_cache): Ditto.
704 * frv-tdep.c (frv_return_value): Ditto.
705 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
706 (h8300h_use_struct_convention): Ditto.
707 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
709 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
711 * hppabsd-tdep.c: Include hppabsd-tdep.h.
712 (hppabsd_find_global_pointer): Make it static.
713 * hppabsd-tdep.h: New.
714 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
715 (hppabsd_init_abi): Remove declaration.
716 (_initialize_hppabsd_tdep): Remove declaration.
717 (_initialize_hppanbsd_tdep): Declare.
718 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
719 (hppabsd_init_abi): Delete declaration.
720 (hppaobsd_init_abi): Make it static.
721 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
722 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
723 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
724 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
725 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
726 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
727 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
728 (_initialize_m32c_tdep): Declare.
729 * m32r-rom.c (_initialize_m32r_rom): Declare.
730 * m32r-tdep.c (m32r_skip_prologue): Make it static.
731 (m32r_return_value): Ditto.
732 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
733 (m68hc11_return_value): Ditto.
734 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
735 * m88k-tdep.c (m88k_frame_cache): Make it static.
736 * mep-tdep.c (mep_gdb_print_insn): Ditto.
737 (mep_return_value): Ditto.
738 (_initialize_mep_tdep): Declare.
739 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
740 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
741 (mips_linux_syscall_next_pc): Ditto.
742 (_initialize_mips_linux_tdep): Declare.
743 * mips-tdep.c (mips_single_step_through_delay): Make it static.
744 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
745 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
746 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
747 * mt-tdep.c (_initialize_mt_tdep): Declare.
748 * nbsd-tdep.c: Include nbsd-tdep.h.
749 * nto-tdep.c (find_load_phdr): Make it static.
750 (_initialize_nto_tdep): Declare.
751 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
753 (_initialize_ppc_linux_tdep): Declare.
754 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
755 (m32r_insert_watchpoint, m32r_remove_watchpoint)
756 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
758 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
759 * rs6000-nat.c: Include xcoffread.h.
760 (find_toc_address): Don't extern declare get_toc_offset. Adjust
761 to call xcoff_get_to_offset.
762 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
763 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
764 (rs6000_skip_trampoline_code): Make static.
765 * s390-tdep.c (s390_regset_from_core_section): Ditto.
766 * sh-tdep.c (sh_register_reggroup_p): Ditto.
767 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
768 (_initialize_shnbsd_tdep): Declare.
769 * solib-frv.c (displacement_from_map): Make static.
770 (_initialize_frv_solib): Declare.
771 * solib-irix.c (fetch_lm_info): Make static.
772 (_initialize_irix_solib): Declare.
773 * solib-som.c: Include solib-som.h.
774 (som_solib_select): Line break.
775 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
776 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
777 (_initialize_sparcnbsd_tdep): ... this.
778 * spu-tdep.c (spu_software_single_step): Make it static.
779 (_initialize_spu_tdep): Declare.
780 * vax-tdep.c (vax_frame_cache): Make it static.
781 * xcoffread.c: Include xcoffread.h.
782 (get_toc_offset): Rename to ...
783 (xcoff_get_toc_offset): ... this.
784 (_initialize_xcoffread): Declare.
786 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
787 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
789 (_initialize_xtensa_tdep): Declare.
791 2008-02-21 Pedro Alves <pedro@codesorcery.com>
793 Silence a few -Wmissing-prototypes warnings.
796 * amd64-nat.c: Include "amd64-nat.h".
797 * fork-child.c (_initialize_fork_child): Ditto.
798 * gcore.c (_initialize_gcore): Ditto.
799 * inf-ptrace.c: Include "inf-ptrace.h".
800 (inf_ptrace_store_registers): Make it static.
801 * linux-nat.c (linux_nat_terminal_ours): Make it static.
802 (_initialize_linux_nat): Declare before definition.
803 * linux-tdep.c: Include "linux-tdep.h".
804 * linux-thread-db.c (_initialize_thread_db): Declare before
806 * proc-service.c (_initialize_proc_service): Ditto.
807 * remote.c (remote_send_printf): Make it static.
808 * solib.c: Include "solib.h".
809 * symfile-mem.c (_initialize_symfile_mem): Declare before
811 * ada-lang.c (ada_la_decode, ada_match_name)
812 (ada_suppress_symbol_printing, ada_is_array_type)
813 (ada_value_ptr_subscript, ada_array_length)
814 (ada_to_static_fixed_value): Make them static.
815 (_initialize_ada_language): Declare before definition.
816 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
817 (ada_task_list_changed, ada_new_objfile_observer): Make them
819 (_initialize_tasks): Declare before definition.
820 * addrmap.c (_initialize_addrmap): Declare before definition.
821 * auxv.c (default_auxv_parse): Make it static.
822 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
824 * breakpoint.c (remove_sal): Add line break.
825 (expand_line_sal_maybe): Make it static.
826 * cp-name-parser.y: Include "cp-support.h".
827 * cp-valprint.c (cp_find_class_member): Make it static.
828 * eval.c (value_f90_subarray): Ditto.
829 * exceptions.c (print_any_exception): Ditto.
830 * findcmd.c (_initialize_mem_search): Declare before definition.
831 * frame.c (frame_observer_target_changed): Make it static.
832 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
833 * inf-child.c: Include "inf-child.h".
834 * inferior.h (valid_inferior_id): Rename to ...
835 (valid_gdb_inferior_id): ... this.
836 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
838 * jv-lang.c (java_language_arch_info): Make it static.
839 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
840 * osdata.c (info_osdata_command): Make it static.
841 * regcache.c (regcache_observer_target_changed): Make it static.
842 * reverse.c (_initialize_reverse): Declare before definition.
843 * stabsread.c (cleanup_undefined_types_noname)
844 (cleanup_undefined_types_1): Make them static.
845 * symfile.c (place_section): Make it static.
846 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
847 * target-descriptions.c (_initialize_target_descriptions): Declare
849 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
850 (find_default_is_async_p, find_default_supports_non_stop): Make
852 (target_supports_non_stop): Add prototype.
853 (dummy_pid_to_str): Make it static.
854 * utils.c (_initialize_utils): Declare before definition.
855 * ada-exp.y (_initialize_ada_exp): Declare before definition.
856 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
857 * target.h (struct target_ops): Add a prototype to the
858 to_can_execute_reverse callback.
859 * macroscope.c (_initialize_macroscope): Declare before definition.
860 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
861 * python/python.c (_initialize_python): Declare before definition.
862 * tui/tui-command.c: Include "tui/tui-command.h".
863 * tui/tui-data.c (init_content_element, init_win_info): Make them
865 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
866 * tui/tui-interp.c (_initialize_tui_interp): Declare before
868 * tui/tui-layout.c: Include "tui/tui-layout.h".
869 (_initialize_tui_layout): Declare before definition.
870 * tui/tui-regs.c: Include "tui/tui-regs.h".
871 (tui_display_reg_element_at_line): Make it static.
872 (_initialize_tui_regs): Declare before definition.
873 * tui/tui-stack.c (_initialize_tui_stack): Declare before
875 * tui/tui-win.c: Include "tui/tui-win.h".
876 (_initialize_tui_win): Declare before definition.
877 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
878 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
879 (tui_get_cmd_list): Add a prototype.
880 * tui/tui-windata.c: Include tui-windata.h.
881 * tui/tui-wingeneral.c (box_win): Make it static.
882 * cli/cli-logging.c (show_logging_command): Make it static.
883 (_initialize_cli_logging): Declare before definition.
884 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
887 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
889 Extend use of i386_use_watchpoints to all i386 native files
890 using hardware watchpoints.
891 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
892 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
893 * windows-nat.c (init_windows_ops): Ditto.
894 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
895 * config/i386/nm-cygwin64.h: Ditto.
896 * config/i386/nm-fbsd.h: Ditto.
897 * config/i386/nm-go32.h: Ditto.
899 2009-02-19 Joel Brobecker <brobecker@adacore.com>
901 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
903 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
905 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
906 (mi_interpreter_init): Register the above.
907 * solib.c (clear_solib): Notify solib unload.
908 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
909 disable breakpoints on a.out targets.
911 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
913 * observer.c (observer_test_first_notification_function)
914 (observer_test_second_notification_function)
915 (observer_test_third_notification_function): Adjust prototype.
917 2009-02-17 Pedro Alves <pedro@codesourcery.com>
919 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
920 (ALL_TARGET_OBS): Add dicos-tdep.o.
921 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
922 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
924 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
926 * dicos-tdep.h, dicos-tdep.c: New.
927 * amd64-dicos-tdep.c: New.
928 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
929 inferior.h. Include dicos-tdep.h.
930 (i386_dicos_init_abi): Call dicos_init_abi.
931 (i386_dicos_bfd_has_symbol_p): Delete.
932 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
934 * NEWS: Mention x86-64 DICOS target support.
936 2009-02-16 Doug Evans <dje@google.com>
938 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
940 (amd64_get_insn_details): Handle more 3-byte opcode insns.
941 (amd64_breakpoint_p): Delete.
942 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
943 don't back up pc to the start of the int3.
944 * i386-tdep.c: #include opcode/i386.h.
945 (i386_skip_prefixes): New function.
946 (i386_absolute_jmp_p): Constify argument.
947 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
948 (i386_breakpoint_p): Delete.
949 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
950 When fixing up after stepping an int3, don't back up pc to the start
953 2009-02-16 Pedro Alves <pedro@codesourcery.com>
955 * corelow.c (core_close): Don't hardcode the core's pid.
956 (core_open): Find core threads before calling
957 post_create_inferior.
958 (add_to_thread_list, get_core_register_section): Take into account
959 systems where the regset section names encode the pid of the
962 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
963 * gdbarch.h, gdbarch.c: Regenerate.
965 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
966 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
967 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
968 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
970 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
972 Include frame information for *stopped due to CLI commands.
974 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
975 * infcmd.c (finish_command_continuation): Pass '1' for
976 'print_frame' parameter to the observer.
977 * infrun.c (normal_stop): Don't print mi-specific information
978 here. Pass 'stop_print_frame' to the 'print_frame' parameter
980 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
981 If we need to print frame, and current uiout is not the MI one,
984 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
986 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
987 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
989 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
992 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
993 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
995 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
997 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
998 for DW_ATE_signed_char and DW_ATE_unsigned_char
1001 2009-02-11 Jim Meyering <meyering@redhat.com>
1002 Jan Kratochvil <jan.kratochvil@redhat.com>
1004 Avoid NULL dereference.
1005 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
1006 New variable func_type.
1008 2009-02-11 Pedro Alves <pedro@codesourcery.com>
1010 * gdbarch.c: Regenerate.
1012 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
1014 * p-lang.c (is_pascal_string_type): Fix comment.
1015 Determine exact size of char elements for GPC
1017 (pascal_printstr): Handle char width of 2 or 4.
1018 * p-valprint.c (pascal_val_print): Handle char
1021 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
1023 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
1024 inside the loop. Only call addrmap_set_empty if the compilation unit
1025 had DW_AT_high_pc and DW_AT_low_pc. Update call to
1026 scan_partial_symbols.
1027 (scan_partial_symbols): Take NEED_PC argument and pass it along with
1029 (add_partial_namespace): Take NEED_PC argument and pass it through.
1030 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
1033 2009-02-07 Pedro Alves <pedro@codesourcery.com>
1035 * NEWS: Mention inspecting extra signal information, $_siginfo,
1036 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
1038 2009-02-07 Pedro Alves <pedro@codesourcery.com>
1040 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
1043 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1045 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
1046 (compat_timer_t, compat_clock_t, struct compat_timeval)
1047 (compat_sigval_t, compat_siginfo_t): New types.
1048 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
1049 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
1050 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
1051 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
1052 (amd64_linux_siginfo_fixup): New.
1053 * linux-nat.c (linux_nat_siginfo_fixup): New.
1054 (siginfo_fixup): New.
1055 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
1056 siginfo layout expected by ptrace and the siginfo layout of the
1058 (linux_nat_set_siginfo_fixup): New.
1059 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
1061 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1063 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
1064 * infrun.c (siginfo_value_read, siginfo_value_write): New.
1065 (siginfo_value_funcs): New.
1066 (siginfo_make_value): New.
1067 (_initialize_infrun): Create the $_siginfo convenience variable.
1068 * gdbtypes.h (append_composite_type_field_aligned): Declare.
1069 * gdbtypes.c (append_composite_type_field): Rename to...
1070 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
1071 argument. Handle it.
1072 (append_composite_type_field): Rewrite on top of
1073 append_composite_type_field_aligned.
1074 * value.h (internalvar_make_value): New typedef.
1075 (struct internalvar) <make_value>: New field.
1076 (create_internalvar_type_lazy): Declare.
1077 * value.c (create_internalvar): Clear make_value.
1078 (create_internalvar_type_lazy): New.
1079 (value_of_internalvar): If make_value is set use it.
1080 (preserve_values): Skip internal variables that don't have a
1082 * gdbarch.sh (get_siginfo_type): New.
1083 * gdbarch.h, gdbarch.c: Regenerate.
1085 * linux-tdep.h, linux-tdep.c: New.
1086 * amd64-linux-tdep.c: Include "linux-tdep.h".
1087 (amd64_linux_init_abi): Register linux_get_siginfo_type and
1088 linux_get_siginfo_mapper.
1089 * i386-linux-tdep.c: Include "linux-tdep.h".
1090 (i386_linux_init_abi): Register linux_get_siginfo_type and
1091 linux_get_siginfo_mapper.
1092 * arm-linux-tdep.c: Include "linux-tdep.h".
1093 (i386_linux_init_abi): Register linux_get_siginfo_type and
1094 linux_get_siginfo_mapper.
1096 * linux-nat.c (linux_xfer_siginfo): New.
1097 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
1098 * remote.c (PACKET_qXfer_siginfo_read)
1099 (PACKET_qXfer_siginfo_write): New.
1100 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
1101 "qXfer:siginfo:write" features.
1102 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
1103 (_initialize_remote): Add "set/show remote read-siginfo-object"
1104 and "set/show remote write-siginfo-object" commands.
1106 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
1107 (HFILES_NO_SRCDIR): Add linux-tdep.h.
1108 (ALLDEPFILES): Add linux-tdep.c.
1110 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
1111 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
1114 2009-02-06 Jim Blandy <jimb@codesourcery.com>
1115 Daniel Jacobowitz <dan@codesourcery.com>
1116 Vladimir Prus <vladimir@codesourcery.com>
1117 Pedro Alves <pedro@codesourcery.com>
1119 * defs.h (enum lval_type): New value: lval_computed.
1120 * value.h (struct lval_funcs): New type.
1121 (allocate_computed_value, value_computed_funcs)
1122 (value_computed_closure): New declarations.
1123 * value.c (struct value): Add a structure to the location union
1124 for computed lvalues, containing 'funcs' and 'closure' members.
1125 (allocate_computed_value, value_computed_funcs)
1126 (value_computed_closure): New functions.
1127 (value_free): For computed lvalues, call the closure's
1128 'free_closure' function before freeing the value itself.
1129 (value_copy): If we're copying an lval_computed value, call the
1130 closure's 'copy_closure' function.
1131 (set_value_component_location): If the original value is a
1132 computed lvalue, then call the closure's 'copy_closure' function.
1133 (value_of_internalvar): If an internal variable's value is a
1134 computed lvalue, make retrieving its value produce an equivalent
1136 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
1137 their read function.
1138 (value_assign): Assign to computed lvalues by calling their write
1141 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1143 * linux-nat.c (linux_nat_wait): Adjust.
1144 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
1145 * linux-nat.h (thread_db_init): Delete declaration.
1146 * linux-thread-db.c (target_beneath): Delete.
1147 (thread_db_init): Delete.
1148 (thread_db_detach): Use find_target_beneath.
1149 (thread_db_wait): Adjust interface. Use find_target_beneath.
1150 (thread_db_mourn_inferior): Use find_target_beneath.
1151 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
1152 (thread_db_async_mask): Delete.
1153 (thread_db_pid_to_str): Adjust interface. Use
1154 find_target_beneath.
1155 (thread_db_get_thread_local_address): Adjust interface. Use
1156 find_target_beneath.
1157 (init_thread_db_ops): Delete references to delete functions.
1158 * target.c (update_current_target): Don't inherit or default
1159 to_wait. Don't inherit to_pid_to_str and
1160 to_get_thread_local_address.
1161 (target_translate_tls_address): Look for a pushed target that
1162 implements to_get_thread_local_address, and use it instead of
1163 checking for target_get_thread_local_address_p.
1164 (target_wait, target_pid_to_str): Reimplement as functions.
1165 (dummy_pid_to_str): New.
1166 (init_dummy_target): Register it.
1167 (debug_to_wait): Delete.
1168 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
1169 to_get_thread_local_address accept a pointer to struct target_ops.
1170 (target_wait): Delete macro, and declare as function.
1171 (target_pid_to_str): Likewise.
1172 (target_get_thread_local_address)
1173 (target_get_thread_local_address_p): Delete.
1174 (noprocess): Add NORETURN and ATTR_NORETURN tags.
1175 * inf-ptrace.c (inf_ptrace_wait): Adjust.
1176 (inf_ptrace_pid_to_str): New.
1177 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
1178 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
1179 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
1180 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
1182 * corelow.c (core_pid_to_str): Adjust.
1183 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
1184 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
1185 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
1186 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
1187 * hpux-thread.c (hpux_thread_wait): Adjust.
1188 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
1189 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
1190 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
1191 * procfs.c (procfs_pid_to_str): Adjust.
1192 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
1193 * remote-mips.c (mips_wait): Adjust.
1194 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
1195 * remote.c (remote_wait, remote_pid_to_str)
1196 (remote_get_thread_local_address): Adjust.
1197 * rs6000-nat.c (rs6000_wait): Adjust.
1198 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
1199 (sol_thread_wait, solaris_pid_to_str): Adjust.
1200 * spu-linux-nat.c (spu_child_wait): Adjust.
1201 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
1203 2009-02-06 Tom Tromey <tromey@redhat.com>
1205 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
1206 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
1207 (python-cmd.o): New target.
1208 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
1209 completer prototype.
1210 (add_cmd): Initialize destroyer member of cmd_list_element. Use
1211 make_symbol_completion_list_fn as completer.
1212 (delete_cmd): Call destroyer if one is set.
1213 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
1214 completer member. Add destroyer member.
1215 (set_cmd_completer): Add self parameter to
1216 completer prototype.
1217 * command.h (set_cmd_completer): Add cmd parameter to
1218 completer prototype.
1219 * completer.c (noop_completer, filename_completer,
1220 location_completer, expression_completer, command_completer): Adapt
1221 to new completer prototype.
1222 (complete_line_internal): Pass new parameter to completer function.
1223 * completer.h (noop_completer, filename_completer,
1224 location_completer, expression_completer, command_completer): Adapt
1225 prototypes to new completer prototype.
1226 * interps.c (interpreter_completer): Adapt to new completer
1228 * python/python-cmd.c: New file.
1229 * python/python-internal.h (gdbpy_initialize_commands): Add
1231 (gdbpy_doc_cst): Add forward declaration.
1232 * python/python.c (gdbpy_doc_cst): Declare.
1233 (_initialize_python): Call gdbpy_initialize_commands. Initialize
1235 * symtab.c (make_symbol_completion_list_fn): New function.
1236 * symtab.h (make_symbol_completion_list_fn): Add prototype.
1238 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1240 * target.c (target_get_osdata): Check for equal or higher than
1241 process_stratum, not dummy_stratum.
1243 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1245 * remote.c (extended_remote_can_run): Delete.
1246 (init_remote_ops): Don't register it.
1247 * target.c (target_get_osdata): Don't check for target_can_run.
1248 Instead any target that has already been pushed, otherwise
1249 fallback to the default run target.
1251 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1253 * target.c (target_create_inferior, target_detach)
1254 (target_mourn_inferior, target_attach, target_close): Do target
1256 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
1257 (debug_to_mourn_inferior, debug_to_close): Delete.
1258 (setup_target_debug): Adjust.
1260 2009-02-05 Pedro Alves <pedro@codesourcery.com>
1262 * target.h (target_stopped_data_address_p): Delete declaration,
1263 and don't define as macro.
1264 * target.c (target_stopped_data_address_p): Delete.
1266 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
1267 Tom Tromey <tromey@redhat.com>
1269 * python/python-utils.c (target_string_to_unicode): New function.
1270 * python/python-internal.h (target_string_to_unicode): New prototype.
1271 * python/python-value.c (valpy_string): New function.
1272 (value_object_methods): Add `string' entry.
1274 2009-02-05 Pedro Alves <pedro@codesourcery.com>
1276 * target.h (target_tid_to_str): Delete.
1277 * thread.c (print_thread_info, thread_apply_all_command)
1278 (thread_apply_command, thread_command, do_captured_thread_select):
1279 Use target_pid_to_str instead of target_tid_to_str.
1280 * linux-fork.c (delete_fork_command): Likewise.
1282 2009-02-05 Pedro Alves <pedro@codesourcery.com>
1284 * frame.c (has_stack_frames): Make public.
1285 (get_prev_frame): Don't allow a NULL this_frame anymore.
1286 * frame.h (has_stack_frames): Declare.
1287 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
1288 to get_prev_frame, instead start at get_current_frame.
1289 (varobj_create): Check has_stack_frames before getting any frame;
1290 eliminate one usage of deprecated_safe_get_selected_frame.
1292 2009-02-05 Tom Tromey <tromey@redhat.com>
1293 Thiago Jung Bauermann <bauerman@br.ibm.com>
1295 * python/python.c (GdbMethods): Move to bottom of file.
1296 (get_parameter, execute_gdb_command, gdbpy_write,
1297 gdbpy_flush): Remove forward declarations.
1298 (eval_python_from_control_command): Fix error checking of function
1299 PyRun_SimpleString. Fix error string.
1300 (python_command): Likewise.
1301 (execute_gdb_command): Added from_tty argument.
1303 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
1305 * language.h (language_dfn): Add la_get_string member.
1306 (LA_GET_STRING): New macro.
1307 (default_get_string): New prototype.
1308 * language.c (default_get_string): New function.
1309 (unknown_language_defn, auto_language_defn, local_language_defn): Use
1310 default_get_string for la_get_string.
1311 * c-lang.c (c_get_string): New function.
1312 (c_language_defn, cplus_language_defn, asm_language_defn): Use
1313 c_get_string for la_get_string.
1314 (minimal_language_defn): Likewise
1315 * ada-lang.c (ada_language_defn): Likewise.
1316 * f-lang.c (f_language_defn): Use default_get_string for
1318 * jv-lang.c (java_language_defn): Likewise.
1319 * m2-lang.c (m2_language_defn): Likewise.
1320 * objc-lang.c (objc_language_defn): Likewise.
1321 * p-lang.c (p_language_defn): Likewise.
1322 * scm-lang.c (scm_language_defn): Likewise.
1323 * typeprint.c (type_to_string): New function.
1324 * value.h (type_to_string): New prototype.
1325 * valprint.c (val_print_string): Factor out code for reading string
1326 from the inferior into its own function. Put 2 spaces after period
1328 (read_string): New function.
1329 * valprint.h (read_string): New prototype.
1331 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
1332 Tom Tromey <tromey@redhat.com>
1334 PR breakpoints/8079:
1335 * breakpoint.c (print_one_breakpoint): Use exp_string field
1336 to display expression of watchpoints.
1337 (mention): Likewise.
1338 (watch_command_1): Remove trailing whitespace from expression.
1339 * printcmd.c (struct display) <exp_string>: New field.
1340 (display_command): Set exp_string.
1341 (free_display): Free exp_string.
1342 (clear_displays): Use free_display.
1343 (do_one_display): Print exp_string.
1344 (display_info): Likewise.
1346 2009-02-04 Tom Tromey <tromey@redhat.com>
1347 Thiago Jung Bauermann <bauerman@br.ibm.com>
1348 Phil Muldoon <pmuldoon@redhat.com>
1350 * python/python-internal.h (gdbpy_get_value_from_history): Rename
1351 prototype to gdbpy_history.
1352 (gdbpy_is_string): Declare.
1353 (python_string_to_host_string): Declare.
1354 * python/python-utils.c (gdbpy_is_string): New function.
1355 (unicode_to_encoded_string): New function.
1356 (unicode_to_target_string): Use it.
1357 (python_string_to_host_string): New function.
1358 * python/python-value.c (valpy_address): New function.
1359 (convert_value_from_python): Use gdbpy_is_string. Change to throw
1360 Python exception instead of a GDB exception on error. Properly check
1362 (valpy_getitem): Convert field name to host string. Handle array
1363 accesses. Adapt to new behaviour of convert_value_from_python.
1364 (valpy_new): Adapt to new behaviour of convert_value_from_python.
1365 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
1366 VALPY_BITXOR, VALPY_BITOR>: New constants.
1367 (valpy_binop): Update. Adapt to new behaviour of
1368 convert_value_from_python.
1369 (valpy_invert): New function.
1370 (valpy_lsh): Likewise.
1371 (valpy_rsh): Likewise.
1372 (valpy_and): Likewise.
1373 (valpy_or): Likewise.
1374 (valpy_xor): Likewise.
1375 (valpy_richcompare): Call convert_value_from_python instead of doing
1377 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
1378 (gdbpy_get_value_from_history): Rename
1379 function to gdbpy_history.
1380 (gdbpy_initialize_values): Don't set tp_new.
1381 (value_object_type): Add valpy_new.
1382 (value_object_methods): Add `address' entry.
1383 (value_object_as_number): Update for new methods.
1384 * python/python.c (GdbMethods): Rename entry from
1385 `get_value_from_history' to `history'.
1387 2009-02-04 Jerome Guitton <guitton@adacore.com>
1389 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
1390 of type to guard against a crash.
1392 2009-02-04 Jerome Guitton <guitton@adacore.com>
1394 * value.c (value_from_contents_and_address): Always return
1395 a lval_memory value, even if address is null.
1397 2009-02-04 Tristan Gingold <gingold@adacore.com>
1399 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
1400 (amd64_darwin_sigcontext_addr): Ditto.
1401 (darwin_dwarf_signal_frame_p): Ditto.
1402 (i386_darwin_init_abi): Handle signal frames, use the const for
1404 (x86_darwin_init_abi_64): Ditto.
1406 2009-02-04 Tristan Gingold <gingold@adacore.com>
1408 * i386-tdep.c (i386_sigtramp_p): Make it public.
1409 * i386-tdep.h (i386_sigtramp_p): Declare.
1411 2009-02-04 Tristan Gingold <gingold@adacore.com>
1413 * machoread.c (macho_symfile_read): Read minsymtab also from
1415 (macho_symfile_read): Try to read dwarf2 frame info from main
1416 object file, but not from OSO files.
1417 (macho_symfile_offsets): Update section names for latest BFD
1419 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
1420 (x86_darwin_init_abi_64): Ditto.
1421 * solib-darwin.c: New file.
1422 * solib-darwin.h: New file.
1423 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
1425 2009-02-04 Tristan Gingold <gingold@adacore.com>
1427 * solist.h (struct target_so_ops): Comment fallback behavior for
1430 2009-02-03 Tom Tromey <tromey@redhat.com>
1432 * completer.c (add_struct_fields): Check type_name against NULL
1435 2009-02-03 Joel Brobecker <brobecker@adacore.com>
1437 * MAINTAINERS: Update Elena's email address.
1439 2009-02-02 Joel Brobecker <brobecker@adacore.com>
1441 * breakpoint (update_watchpoint): Minor comment adjustment.
1443 2009-02-02 Tom Tromey <tromey@redhat.com>
1446 * completer.c (count_struct_fields): Count method names.
1447 (add_struct_fields): Add matching method names.
1449 2009-02-02 Doug Evans <dje@google.com>
1451 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
1452 doing any further tcl/tk configury. Don't configure gdbtk if
1453 tcl or tk check fails.
1454 * aclocal.m4: Regenerate.
1455 * configure: Regenerate.
1457 2009-02-02 Tom Tromey <tromey@redhat.com>
1460 * valops.c (find_overload_match): Follow typedefs before taking
1461 address of object argument.
1463 2009-02-01 Doug Evans <dje@google.com>
1465 * target.h (target_waitstatus_to_string): Declare.
1466 * target.c (target_waitstatus_to_string): New function. Copied from
1467 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
1468 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
1469 TARGET_WAITKIND_NO_HISTORY.
1470 (debug_to_wait): Call it.
1471 * infrun.c (wait_for_inferior): If debug_infrun, print result of
1473 (fetch_inferior_event): Ditto.
1475 2009-01-30 Tom Tromey <tromey@redhat.com>
1477 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
1479 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
1482 * thread.c (do_captured_list_thread_ids): Report the current
1485 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
1487 * breakpoint.c (create_breakpoint, create_breakpoints)
1488 (break_command_really, set_breakpoint): New parameter enabled.
1489 (create_breakpoint, break_command_really): Make breakpoint
1490 disabled if so requested.
1491 * breakpoint.h (set_breakpoint): New parameter enabled.
1492 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
1494 2009-01-28 Doug Evans <dje@google.com>
1496 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
1497 (amd64_displaced_step_fixup): Declare.
1498 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
1499 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
1500 and make static global.
1501 (amd64_arch_regmap_len): New static global.
1502 (amd64_arch_reg_to_regnum): New function.
1503 (struct amd64_insn): New struct.
1504 (struct displaced_step_closure): New struct.
1505 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
1506 (rex_prefix_p,skip_prefixes)
1507 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
1508 (amd64_insn_length,amd64_get_unused_input_int_reg)
1509 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
1510 (amd64_displaced_step_copy_insn)
1511 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
1512 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
1513 (amd64_displaced_step_fixup): New functions.
1514 * amd64-linux-tdep.c: #include arch-utils.h.
1515 (amd64_linux_init_abi): Install displaced stepping support.
1517 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
1518 Jerome Guitton <guitton@adacore.com>
1520 * configure, config.in: Regenerated.
1521 * configure.ac: Add --with-system-gdbinit.
1522 * main.c (get_init_files): New.
1523 (captured_main): Use get_init_files. Load system gdbinit before
1525 (print_gdb_help): Print location of init files.
1527 2009-01-28 Pedro Alves <pedro@codesourcery.com>
1529 * corefile.c (generic_search): Delete disabled code.
1530 * gdbcore.h (generic_search): Delete declaration.
1532 2009-01-26 Pedro Alves <pedro@codesourcery.com>
1534 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
1535 parent to the child.
1536 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
1537 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
1538 remove_breakpoints to remove breakpoints from the parent.
1540 2009-01-26 Pedro Alves <pedro@codesourcery.com>
1542 PR backtrace/9458, PR backtrace/8864:
1543 * frame.c (create_new_frame): Update the frame's cached PC before
1544 finding its unwinder. Use frame_id_build to build the new frame's
1546 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
1547 array values from the ``args'' array values.
1549 2009-01-26 Pedro Alves <pedro@codesourcery.com>
1551 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
1552 (create_array_type, create_set_type, init_flags_type)
1553 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
1554 with a call to XZALLOC or XCALLOC, and pairs of calls to
1555 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
1557 2009-01-26 Pedro Alves <pedro@codesourcery.com>
1559 Add "maint set|show internal-error|internal-warning quit|corefile
1560 ask|yes|no" commands.
1563 * utils.c (internal_problem_ask, internal_problem_yes)
1564 (internal_problem_no, internal_problem_modes): New.
1565 (struct internal_problem): Remove FIXME. Make should_quit and
1566 should_dump_core types to char *.
1567 (internal_vproblem, internal_error_problem)
1568 (internal_warning_problem): Adjust.
1569 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
1571 (add_internal_problem_command): New.
1572 (_initialize_utils): New.
1574 2009-01-25 Pedro Alves <pedro@codesourcery.com>
1576 * infcmd.c (program_info): Use paddress instead of casting stop_pc
1579 2009-01-24 Pedro Alves <pedro@codesourcery.com>
1581 * infrun.c (normal_stop): Don't call
1582 deprecated_update_frame_pc_hack.
1583 * frame.c (deprecated_update_frame_pc_hack)
1584 (deprecated_update_frame_base_hack): Delete, and ...
1585 (create_new_frame): ... inline here.
1586 * frame.h (deprecated_update_frame_pc_hack)
1587 (deprecated_update_frame_base_hack): Delete declarations.
1589 2009-01-23 Pedro Alves <pedro@codesourcery.com>
1591 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
1592 * cli/cli-setshow.c (do_setshow_command): Handle it.
1593 * command.h (enum var_types): Add var_zuinteger.
1594 (add_setshow_zuinteger_cmd): Declare.
1596 * valprint.c (_initialize_valprint): Change the set input-radix
1597 and set output-radix commands to zuinteger type.
1599 2009-01-23 Pedro Alves <pedro@codesourcery.com>
1602 * infrun.c (normal_stop): Tag threads as stopped, and run the
1603 hook-stop before printing the stack frame.
1605 2009-01-22 Pedro Alves <pedro@codesourcery.com>
1608 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
1611 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
1613 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
1616 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
1619 * infcmd.c (signal_command): Do not specify a resume PC.
1621 2009-01-19 Doug Evans <dje@google.com>
1623 * dummy-frame.c (dummy_frame): Replace regcache member with
1625 (dummy_frame_push): Replace caller_regcache arg with caller_state.
1626 All callers updated.
1627 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
1628 (dummy_frame_pop): Rewrite. Verify requested frame is in the
1629 dummy frame stack. Restore program state.
1630 (cleanup_dummy_frames): Rewrite.
1631 (dummy_frame_sniffer): Update. Make static.
1632 * dummy-frame.h (regcache,frame_info): Delete forward decls.
1633 (inferior_thread_state): New forward decl.
1634 (dummy_frame_push): Update prototype.
1635 * frame.c (frame_pop): dummy_frame_pop now does all the work for
1637 * infcall.c (breakpoint_auto_delete_contents): Delete.
1638 (get_function_name,run_inferior_call): New fns.
1639 (call_function_by_hand): Simplify by moving some code to
1640 get_function_name, run_inferior_call. Inferior function call wrapped
1641 in TRY_CATCH so there's less need for cleanups and all exits from
1642 proceed are handled similarily. Detect program exit.
1643 Detect program stopping in a different thread.
1644 Make error messages more consistent.
1645 * inferior.h (inferior_thread_state): Declare (opaque type).
1646 (save_inferior_thread_state,restore_inferior_thread_state,
1647 make_cleanup_restore_inferior_thread_state,
1648 discard_inferior_thread_state, get_inferior_thread_state_regcache):
1650 (save_inferior_status): Update prototype.
1651 * infrun.c: (normal_stop): When stopped for the completion of an
1652 inferior function call, verify the expected stack frame kind.
1653 (inferior_thread_state): New struct.
1654 (save_inferior_thread_state,restore_inferior_thread_state,
1655 do_restore_inferior_thread_state_cleanup,
1656 make_cleanup_restore_inferior_thread_state,
1657 discard_inferior_thread_state,
1658 get_inferior_thread_state_regcache): New functions.
1659 (inferior_status): Move stop_signal, stop_pc, registers to
1660 inferior_thread_state. Remove restore_stack_info.
1661 (save_inferior_status): Remove arg restore_stack_info.
1662 All callers updated. Remove saving of state now saved by
1663 save_inferior_thread_state.
1664 (restore_inferior_status): Remove restoration of state now done by
1665 restore_inferior_thread_state.
1666 (discard_inferior_status): Remove freeing of registers, now done by
1667 discard_inferior_thread_state.
1669 2009-01-18 Pedro Alves <pedro@codesourcery.com>
1671 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
1672 at a time, times NUM_TO_SCROLL.
1673 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
1674 fetch the selected frame if there is no stack.
1676 2009-01-18 Pedro Alves <pedro@codesourcery.com>
1679 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
1681 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
1682 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
1683 is thrown while handling an event, finish the thread state.
1684 (normal_stop): Use finish_thread_state cleanup.
1685 * infcmd.c (run_command_1): If an error is thrown while starting
1686 the inferior, finish the thread state.
1688 2009-01-18 Pedro Alves <pedro@codesourcery.com>
1690 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
1691 skip breakpoints without a location (pending breakpoints).
1693 2009-01-18 Pedro Alves <pedro@codesourcery.com>
1696 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
1698 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
1700 * thread.c (thread_command): Move call to annotate_thread_changed
1702 (do_captured_thread_select): ... here, to avoid printing an
1703 annotation if the thread change generates an exception.
1705 2009-01-16 Joel Brobecker <brobecker@adacore.com>
1707 * NEWS: Document x86_64/MinGW as a new native configuration.
1709 2009-01-16 Joel Brobecker <brobecker@adacore.com>
1711 * NEWS: Move the documentation of "info os processes" to
1712 the appropriate section (documenting the new commands).
1714 2009-01-15 Doug Evans <dje@google.com>
1716 * target.h (target_signal_to_string): Make return type const char *.
1717 (target_signal_to_name): Ditto.
1718 (target_signal_from_name): Make arg const char *.
1719 * infrun.c (sig_print_info): Update.
1720 * signals/signals.c (signals): Make array and struct members const.
1721 (target_signal_to_string): Make return type const char *.
1722 (target_signal_to_name): Ditto.
1723 (target_signal_from_name): Make arg const char *.
1725 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
1726 Tristan Gingold <gingold@adacore.com>
1728 * solist.h (struct target_so_ops): New member bfd_open.
1729 (solib_find): Add prototype.
1730 (solib_bfd_fopen): Add prototype.
1731 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
1732 from solib_bfd_open.
1733 (solib_bfd_open): Use ops->bfd_open override if present. Call
1734 solib_find and solib_bfd_open otherwise.
1736 * objfiles.h (OBJF_KEEPBFD): New define.
1737 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
1738 objfile flag is set.
1739 * solib.c (symbol_add_stub): Do not allocate second BFD for
1740 shared library; use OBJF_KEEPBFD flag on solib objfile.
1742 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
1744 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
1746 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
1748 * value.h (address_of_variable): Add prototype.
1749 (locate_var_value): Remove prototype.
1751 * findvar.c (read_var_value): Do not attempt to default frame
1753 (locate_var_value): Remove function.
1754 * valops.c (value_of_variable): Retrieve selected frame for
1755 symbols that require a frame when called with NULL block.
1756 * valops.c (address_of_variable): New function.
1758 * eval.c (evaluate_subexp_for_address): Call address_of_variable
1759 instead of calling locate_var_value.
1760 (evaluate_subexp_with_coercion): Likewise.
1762 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
1764 * NEWS: Document "define" for prefixed commands.
1765 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
1766 show_user_1 for prefix commands.
1767 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
1768 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
1769 commands. Return the containing command list.
1770 (define_command, document_command): Update to handle prefix commands.
1771 (show_user_1): Add prefix and name arguments. Handle prefix
1773 * cli/cli-script.h (show_user_1): Update prototype.
1775 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
1777 * mingw-ser.c (console_select_thread): Add return to make
1779 (pipe_select_thread): Likewise.
1780 (file_select_thread): Likewise.
1782 2009-01-14 Pedro Alves <pedro@codesourcery.com>
1784 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
1787 2009-01-14 Pedro Alves <pedro@codesourcery.com>
1789 * remote.c (extended_remote_mourn_1): Invalidate our notion of
1790 current general thread.
1792 2009-01-14 Pedro Alves <pedro@codesourcery.com>
1794 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
1795 without a live selected thread.
1797 2009-01-14 Joel Brobecker <brobecker@adacore.com>
1799 Update the copyright notice of some of the files I missed
1800 in the previous copyright update.
1802 2009-01-14 Joel Brobecker <brobecker@adacore.com>
1804 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
1805 base address instead of casting it to DWORD.
1807 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
1809 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
1810 for NULL frame pointers.
1812 2009-01-13 Mark Kettenis <kettenis@gnu.org>
1814 * utils.c (host_address_to_string): Reimplement in a way that
1815 avoids the cast of the address to long.
1817 2009-01-13 Joel Brobecker <brobecker@adacore.com>
1819 * mdebugread.c (parse_symbol): Save the symbol private data
1820 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
1821 (psymtab_to_symtab_1): Likewise.
1822 (parse_procedure): Declare variable "e" only in the scope
1823 where it is used. Extract the symbol private data using
1826 2009-01-13 Jim Blandy <jimb@codesourcery.com>
1828 Abstract out common code for copying value locations.
1830 * value.h (set_value_component_location): New declaration.
1831 * value.c (set_value_component_location): New function.
1832 (value_primitive_field): Use it.
1833 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
1834 * valops.c (search_struct_field, value_slice): Same.
1835 * ada-lang.c (coerce_unspec_val_to_type)
1836 (ada_value_primitive_packed_val): Same.
1838 2009-01-13 Joel Brobecker <brobecker@adacore.com>
1840 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
1842 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
1844 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
1846 * i386-cygwin-tdep.c: Ditto.
1847 * i386-windows-nat.c: Ditto.
1848 * windows-nat.h: Ditto.
1849 * windows-tdep.c: Ditto.
1850 * windows-tdep.h: Ditto.
1851 * windows-nat.c: Ditto.
1852 (cygwin_load_start): Redefine as CORE_ADDR.
1853 (cygwin_load_end): Ditto.
1854 (windows_make_so): Coerce result of address arithmetic to uintptr_t
1855 before coercing to CORE_ADDR to avoid a compiler warning.
1856 (handle_exception): Define addr as CORE_ADDR and coerce
1857 ExceptionAddress to uintptr_t before assigining to avoid a compiler
1859 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
1862 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1864 Fix linking with --enable-targets=all:
1865 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
1866 (HFILES_NO_SRCDIR): Add windows-tdep.h.
1867 (ALLDEPFILES): Add windows-tdep.c.
1869 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
1871 * win32-nat.h: Delete.
1872 * windows-nat.h: Rename from win32-nat.h.
1873 * win32-nat.c: Delete.
1874 * windows-nat.c: Rename from win32-nat.c.
1875 * win32-termcap.c: Delete.
1876 * windows-termcap.c: Rename from win32-termcap.c.
1877 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
1878 * configure.ac: Handle rename from win32-termcap.c ->
1880 * configure: Regenerate.
1881 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
1882 -> windows-termcap.c.
1883 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
1885 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
1886 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
1888 (win32_make_so): Handle cygwin compiler warning due to change of
1889 load_addr from DWORD to LPVOID.
1890 (handle_load_dll): Use %p in format string to properly print address
1891 and avoid a compiler warning.
1892 (DEBUG_EXCEPTION_SIMPLE): Ditto.
1893 (handle_exception): Ditto.
1894 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
1895 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
1897 * config/i386/mingw.mh: Ditto.
1898 * config/i386/mingw64.mh: Ditto.
1900 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1902 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
1903 arrayprint_recurse_level to a parameter. Update all the callers. New
1904 comment at autovariables.
1906 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1908 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
1911 2009-01-11 Joel Brobecker <brobecker@adacore.com>
1913 * target.c (target_xfer_partial): Use host_address_to_string to
1914 print the address of readbuf and writebuf. Cast the address of
1915 elements inside the myaddr buffer into intptr_t.
1916 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
1917 Cast the address of elements inside the myaddr buffer into
1920 2009-01-11 Joel Brobecker <brobecker@adacore.com>
1922 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
1923 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
1924 * configure.host, configure.tgt: Add handling for x86_64/windows.
1925 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
1926 and amd64-windows-tdep.c.
1928 2009-01-11 Joel Brobecker <brobecker@adacore.com>
1930 * win32-tdep.h, win32-tdep.c: New files.
1931 * i386-cygwin-tdep.h: Delete.
1932 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
1934 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
1935 * win32-nat.c: Likewise.
1936 * configure.tgt: Add win32-tdep.o to the list of target object
1937 files for i386-cygwin and i386-mingw targets.
1939 2009-01-11 Joel Brobecker <brobecker@adacore.com>
1941 * win32-nat.h: New file.
1942 * win32-nat.c (mappings): Initialize to NULL.
1943 (win32_set_context_register_offsets): New function.
1944 * i386-windows-nat.c: New file.
1945 (mappings): Moved here from win32-nat.c.
1946 (_initialize_i386_windows_nat): New function.
1947 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
1948 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
1950 2009-01-09 Andreas Schwab <schwab@suse.de>
1952 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
1954 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
1956 * gdbtypes.c (append_composite_type_field): Correct the location of
1959 2009-01-09 Pedro Alves <pedro@codesourcery.com>
1961 * defs.h (deprecated_error_hook): Delete declaration.
1962 * interps.c (clear_interpreter_hooks): Adjust.
1963 * remote-sim.c (gdb_os_error): Don't try to call
1964 deprecated_error_hook. No need to call exit anymore.
1965 * top.c (deprecated_error_hook): Delete.
1967 2009-01-09 Joel Brobecker <brobecker@adacore.com>
1969 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
1970 to print the address of the gdbarch pointer.
1972 2009-01-09 Joel Brobecker <brobecker@adacore.com>
1974 * gdbarch.sh: Fix all the compilation errors on amd64-windows
1975 due to casting a pointer to a long when printing a function
1976 address. Instead, use host_address_to_string to convert our
1977 address to a string.
1978 * gdbarch.c: Regenerate.
1980 2009-01-09 Joel Brobecker <brobecker@adacore.com>
1982 * event-top.c (async_disconnect, async_stop_sig): use "raise"
1983 instead of "kill" to raise a signal.
1985 2009-01-09 Joel Brobecker <brobecker@adacore.com>
1987 * win32-nat.c (get_module_name): Change the type of parameter
1988 "base_address" to LPVOID. Remove unnecessary cast.
1989 (struct lm_info): Change type of load_addr to LPVOID.
1990 (win32_make_so): Change the type of parameter "load_addr"
1991 to LPVOID. Remove some unnecessary casts.
1992 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
1993 (win32_xfer_shared_libraries): Add missing cast.
1995 2009-01-09 Joel Brobecker <brobecker@adacore.com>
1997 * win32-nat.c (has_detach_ability, set_process_privilege):
1998 Cast the result of GetProcAddress to (void *) to avoid
1999 a compilation warning.
2001 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2003 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
2006 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2008 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
2009 definition of local variable "done".
2010 (info_w32_command, handle_exception): Remove unnecessary cast.
2012 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2014 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
2015 DebugSetProcessKillOnExit. Update all uses in this file.
2016 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
2017 Update all uses in this file.
2019 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2021 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
2022 and use it when pushing the target.
2023 (win32_attach, win32_create_inferior): Update call to
2024 do_initial_win32_stuff.
2025 (win32_detach, win32_mourn_inferior): Use our ops parameter
2026 instead of the global win32_ops to unpush the target.
2028 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2030 * ser-mingw.c (ser_windows_open): Use proper type when casting
2031 in call to _open_osfhandle.
2033 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
2035 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
2037 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2039 * CONTRIBUTE: Minor reformatting.
2041 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
2043 * MAINTAINERS: Add myself to Write After Approval.
2044 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
2047 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
2049 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
2050 Call exit to make it obvious to GCC.
2052 2009-01-08 Tom Tromey <tromey@redhat.com>
2054 PR breakpoints/9350:
2055 * varobj.c (varobj_invalidate): Unconditionally free
2057 * symfile.c (syms_from_objfile): Free local_addr when returning
2059 * exec.c (exec_file_attach): Do cleanups before returning.
2060 (exec_file_command): Likewise.
2061 * corefile.c (reopen_exec_file): Do cleanups before returning.
2062 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
2064 (do_vec_free): New function.
2065 (update_global_location_list): Make a cleanup for old_locations.
2066 Do cleanups before returning. Remove unused variable 'e'.
2067 (find_condition_and_thread): Free result of parsing the
2069 (print_it_typical): Do cleanups before returning.
2070 (breakpoint_re_set_one): Always free sals.sals.
2072 2009-01-08 Joel Brobecker <brobecker@adacore.com>
2073 Emi Suzuki <emi-suzuki@tjsys.co.jp>
2075 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
2078 2009-01-07 Doug Evans <dje@google.com>
2080 * top.c (gdb_prompt_string): Delete, unused.
2082 2009-01-07 Pedro Alves <pedro@codesourcery.com>
2084 Delete ONE_PROCESS_WRITETEXT leftovers.
2086 * breakpoint.c (insert_bp_location): Delete process_warning
2088 (insert_breakpoint_locations): Adjust.
2089 (reattach_breakpoints): Adjust.
2090 * infrun.c (normal_stop): Drop "It might be running in another
2093 2009-01-07 Stan Shebs <stan@codesourcery.com>
2095 * config/pa/linux.mh (XDEPFILES): Remove.
2097 2009-01-07 Doug Evans <dje@google.com>
2099 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
2101 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
2103 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
2104 spacing, a regression from 2008-04-22.
2106 2009-01-07 Joel Brobecker <brobecker@adacore.com>
2108 * utils.c (gdb_print_host_address): Adjust implementation to
2109 reuse host_address_to_string. Move comment explaining the conversion
2110 from host address to string from here...
2111 (host_address_to_string): ... to there.
2113 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
2115 * MAINTAINERS: Add myself for write after approval privileges.
2117 2009-01-06 Tom Tromey <tromey@redhat.com>
2119 * value.c (set_internalvar): Use value_free, not xfree.
2121 2009-01-06 Jim Blandy <jimb@red-bean.com>
2123 Check return values of functions declared with warn_unused_result
2124 attribute in GLIBC 2.8.
2125 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
2126 * inflow.c (check_syscall): New function.
2127 (new_tty): Use check_syscall to check return values from open and dup.
2128 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
2129 * main.c (captured_main): Call cwd after setting up gdb_stderr;
2130 check for errors from getcwd.
2131 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
2132 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
2133 (stdio_file_fputs): Same.
2134 * utils.c (internal_vproblem): abort if last-ditch error message
2137 * top.c (gdb_init): Don't set the current directory here; that's
2138 already been done in captured_main.
2140 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
2142 * ser-tcp.c: Adjust includes.
2143 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
2144 (tcp_auto_retry, tcp_retry_limit): Declare.
2145 (TIMEOUT): Remove, in favor of tcp_retry_limit.
2146 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
2147 (wait_for_connect): New function.
2148 (net_open): Use it. Add auto-retry logic.
2149 (set_tcp_cmd, show_tcp_cmd): New functions.
2150 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
2151 and "set/show tcp connect-timeout" commands.
2152 * NEWS: Document new commands.
2154 2009-01-05 Tom Tromey <tromey@redhat.com>
2156 * python/python-internal.h (Py_ssize_t): Define as int.
2158 2009-01-05 Jim Blandy <jimb@red-bean.com>
2160 * MAINTAINERS: Fix my e-mail address as steering committee member.
2162 2009-01-03 Joel Brobecker <brobecker@adacore.com>
2164 Updated copyright notices for most files.
2166 2009-01-03 Joel Brobecker <brobecker@adacore.com>
2168 * top.c (print_gdb_version): Update copyright year.
2170 2009-01-03 Joel Brobecker <brobecker@adacore.com>
2172 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
2174 2009-01-01 Pedro Alves <pedro@codesourcery.com>
2176 PR breakpoints/9681:
2177 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
2178 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
2179 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
2180 retrow all other exceptions.
2182 For older changes see ChangeLog-2008.
2188 version-control: never
projects / external / binutils.git / blob