1 2013-05-13 Tom Tromey <tromey@redhat.com>
3 * gcore.c (create_gcore_bfd): Make 'filename' const.
4 * gcore.h (create_gcore_bfd): Make 'filename' const.
5 * record-full.c (record_full_save): Make 'recfilename' const.
6 * target.c (target_save_record): Make 'filename' const.
7 * target.h (struct target_ops) <to_save_record>: Make 'filename'
9 (target_save_record): Likewise.
11 2013-05-13 Tom Tromey <tromey@redhat.com>
14 * dwarf2read.c (dwarf2_record_block_ranges): Ensure that the
15 ranges section has been read.
17 2013-05-13 Tom Tromey <tromey@redhat.com>
20 * eval.c (evaluate_subexp_standard) <STRUCTOP_STRUCT,
21 STRUCTOP_PTR>: Return a not_lval value for
22 EVAL_AVOID_SIDE_EFFECTS.
23 * opencl-lang.c (evaluate_subexp_opencl): Return a not_lval value
24 for EVAL_AVOID_SIDE_EFFECTS.
26 2013-05-13 Joel Brobecker <brobecker@adacore.com>
28 * rs6000-aix-tdep.c (rs6000_push_dummy_call): Convert
29 floating point registers to register type before storing
31 * rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call):
34 2013-05-10 Joel Brobecker <brobecker@adacore.com>
35 Tom Tromey <tromey@redhat.com>
37 * common/filestuff.c (mark_fd_no_cloexec, unmark_fd_no_cloexec):
39 * common/filestuff.c (mark_fd_no_cloexec, unmark_fd_no_cloexec):
41 * darwin-nat.c (darwin_pre_ptrace): Use mark_fd_no_cloexec.
42 (darwin_ptrace_him): Use unmark_fd_no_cloexec.
43 * inf-ttrace.c (do_cleanup_pfds): Use unmark_fd_no_cloexec.
44 (inf_ttrace_prepare): Use mark_fd_no_cloexec.
46 2013-05-10 Freddie Chopin <freddie_chopin@op.pl>
47 Tom Tromey <tromey@redhat.com>
51 * configure.ac (build_warnings): Do not use -Wformat-nonliteral
54 2013-05-10 Pedro Alves <palves@redhat.com>
56 * remote.c (_initialize_remote): Fix spelling of
57 qXfer:traceframe-info:read packet in packet config command.
59 2013-05-10 David Taylor <dtaylor@emc.com>
63 * remote.c (remote_trace_set_readonly_regions): Do not overwrite
64 "QTro" at start of packet.
66 2013-05-10 Joel Brobecker <brobecker@adacore.com>
68 * solib-aix.c (solib_aix_relocate_section_addresses):
69 For the .bss section action, apply the same offset as
72 2013-05-10 Joel Brobecker <brobecker@adacore.com>
74 * solib-aix.c (solib_aix_relocate_section_addresses):
77 2013-05-10 Joel Brobecker <brobecker@adacore.com>
80 * sol-thread.c (ps_lgetxregsize, ps_lgetxregs, ps_lsetxregs):
81 New functions, directly copied from sparc-sol-thread.c.
82 * sparc-sol-thread.c: Delete.
83 * configure.ac: Remove code handling sparc-solaris-thread.c.
84 * configure: Regenerate.
86 2013-05-10 Phil Muldoon <pmuldoon@redhat.com>
88 * stack.c (backtrace_command_1): Add "no-filters", and Python frame
90 (backtrace_command): Add "no-filters" option parsing.
91 (_initialize_stack): Alter help to reflect "no-filters" option.
92 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-framefilter.o
93 (SUBDIR_PYTHON_SRCS): Add py-framefilter.c
94 (py-frame.o): Add target
95 * data-directory/Makefile.in (PYTHON_DIR): Add Python frame
97 * python/python.h: Add new frame filter constants, and flag enum.
98 (apply_frame_filter): Add definition.
99 * python/python.c (apply_frame_filter): New non-Python
101 * python/py-utils.c (py_xdecref): New function.
102 (make_cleanup_py_xdecref): Ditto.
103 * python/py-objfile.c: Declare frame_filters dictionary.
104 (objfpy_dealloc): Add frame_filters dealloc.
105 (objfpy_new): Initialize frame_filters attribute.
106 (objfile_to_objfile_object): Ditto.
107 (objfpy_get_frame_filters): New function.
108 (objfpy_set_frame_filters): New function.
109 * python/py-progspace.c: Declare frame_filters dictionary.
110 (pspy_dealloc): Add frame_filters dealloc.
111 (pspy_new): Initialize frame_filters attribute.
112 (pspacee_to_pspace_object): Ditto.
113 (pspy_get_frame_filters): New function.
114 (pspy_set_frame_filters): New function.
115 * python/py-framefilter.c: New file.
116 * python/lib/gdb/command/frame_filters.py: New file.
117 * python/lib/gdb/frames.py: New file.
118 * python/lib/gdb/__init__.py: Initialize global frame_filters
120 * python/lib/gdb/FrameDecorator.py: New file.
121 * python/lib/gdb/FrameIterator.py: New file.
122 * mi/mi-cmds.c (mi_cmds): Add frame filters command.
123 * mi/mi-cmds.h: Declare.
124 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Add
125 --no-frame-filter logic, and Python frame filter logic.
126 (stack_enable_frame_filters): New function.
127 (parse_no_frame_option): Ditto.
128 (mi_cmd_stack_list_frames): Add --no-frame-filter and Python frame
130 (mi_cmd_stack_list_locals): Ditto.
131 (mi_cmd_stack_list_args): Ditto.
132 (mi_cmd_stack_list_variables): Ditto.
133 * NEWS: Add frame filter note.
135 2013-05-09 Doug Evans <dje@google.com>
137 * symfile.c (syms_from_objfile_1): Delete args offsets, num_offsets.
139 (syms_from_objfile): Ditto. Make static.
140 (symbol_file_add_with_addrs): Renamed from
141 symbol_file_add_with_addrs_or_offsets. Delete args offsets,
142 num_offsets. All callers updated.
143 * symfile.h (syms_from_objfile): Delete.
145 * symfile.c (decrement_reading_symtab): Add assert.
146 (increment_reading_symtab): Ditto.
148 2013-05-09 Joel Brobecker <brobecker@adacore.com>
150 * source.c (forward_search_command): Replace call to getc
152 (reverse_search_command): Likewise.
154 2013-05-08 Doug Evans <dje@google.com>
156 * psymtab.c (expand_symtabs_matching_via_partial): Fix file name
159 2013-05-08 Joel Brobecker <brobecker@adacore.com>
161 * sol-thread.c (info_cb): Factorize the code a little.
163 2013-05-08 Joel Brobecker <brobecker@adacore.com>
165 * sol-thread.c (info_cb): Rework the output of the "maintenance
166 info sol-threads" command a bit.
168 2013-05-08 Joel Brobecker <brobecker@adacore.com>
170 * sol-thread.c (info_cb) [ti.ti_state == TD_THR_SLEEP]:
171 Replace ti.ti_startfunc by ti.ti_pc.
173 2013-05-08 Joel Brobecker <brobecker@adacore.com>
175 * solib-aix.c (solib_aix_free_library_list): New function
176 for the case where HAVE_LIBEXPAT is not defined.
178 2013-05-07 Sergio Durigan Junior <sergiodj@redhat.com>
180 PR breakpoints/15413:
181 * breakpoint.c (condition_completer): Simplify the code to
182 disconsider multiple locations of breakpoints when completing the
185 2013-05-07 Pierre Muller <muller@sourceware.org>
187 * common/linux-btrace.c: ARI fix: Include "gdb_wait.h"
188 instead of <sys/wait.h>.
190 2013-05-07 Pierre Muller <muller@sourceware.org>
192 * nios2-tdep.c (nios2_dwarf_reg_to_regnum): ARI fix: remove
193 trailing new line from warning message.
195 2013-05-07 Pierre Muller <muller@sourceware.org>
197 * contrib/ari/gdb_ari.sh (SOLIB_ADD, SOLIB_CREATE_INFERIOR_HOOK)
198 (PC_SOLIB): Change type from ari_deprecate to ari_regression.
200 2013-05-07 Joel Brobecker <brobecker@adacore.com>
202 * rs6000-nat.c (rs6000_core_ldinfo): Remove '\n' at end of
203 error message (ARI fix).
205 2013-05-07 Joel Brobecker <brobecker@adacore.com>
207 * features/library-list-aix.dtd: Replace library-list by
209 * rs6000-nat.c: Replace library-list by library-list-aix
211 * solib-aix.c: Likewise.
213 2013-05-07 Joel Brobecker <brobecker@adacore.com>
215 * target.h (enum target_object) [TARGET_OBJECT_LIBRARIES_AIX]:
216 Renames TARGET_OBJECT_AIX_LIBRARIES.
217 * rs6000-nat.c: Replace TARGET_OBJECT_AIX_LIBRARIES with
218 TARGET_OBJECT_LIBRARIES_AIX throughout.
219 * solib-aix.c: Likwise.
221 2013-05-07 Yao Qi <yao@codesourcery.com>
223 * solib-dsbt.c (struct dsbt_info) <enable_break2_done>: Remove.
224 (get_dsbt_info, enable_break, dsbt_clear_solib): Update.
226 2013-05-07 Yao Qi <yao@codesourcery.com>
228 * solib-dsbt.c (enable_break): Declare.
229 (dsbt_current_sos): Remove call to enable_break2.
230 (enable_break2): Rename to enable_break. Set solib breakpoint
231 on '_dl_debug_state'.
232 (enable_break): Remove.
234 2013-05-07 Luis Machado <lgustavo@codesourcery.com>
236 * ppc-linux-nat.c (ppc_linux_new_thread): Clear the new thread's
237 debug state prior to replicating existing hardware watchpoints or
240 2013-05-07 Jan Kratochvil <jan.kratochvil@redhat.com>
242 * gcore.c (gcore_create_callback): Ignore sections with
243 separate_debug_objfile_backlink != NULL.
245 2013-05-06 Sandra Loosemore <sandra@codesourcery.com>
246 Andrew Jenner <andrew@codesourcery.com>
247 Chung-Lin Tang <cltang@codesourcery.com>
248 Julian Brown <julian@codesourcery.com>
250 Based on the nios2-elf port from Altera Corporation.
252 * Makefile.in (ALL_TARGET_OBS): Add nios2-tdep.o and
254 (HFILES_NO_SRCDIR): Add nios2-tdep.h.
255 (ALLDEPFILES): Add nios2-tdep.c and nios2-linux-tdep.c.
256 * configure.tgt: Add nios2*-*-linux* and nios2*-*-* targets.
259 * nios2-linux-tdep.c: New.
260 * features/Makefile (WHICH): Add nios2-linux.
261 (nios2-linux-expedite): Set.
262 * features/nios2-cpu.xml: New.
263 * features/nios2.xml: New.
264 * features/nios2-linux.xml: New.
265 * features/nios2.c: New (autogenerated).
266 * features/nios2-linux.c: New (autogenerated).
267 * regformats/nios2-linux.dat: New (autogenerated).
268 * NEWS (Changes since GDB 7.6): Add new Nios II targets
271 2013-05-06 Doug Evans <dje@google.com>
273 * symfile.c: Whitespace cleanup.
275 * solist.h (struct target_so_ops): New member clear_so.
276 * solib-svr4.c (svr4_clear_so): New function.
277 (_initialize_svr4_solib): Set svr4_so_ops.clear_so.
278 * solib.c (clear_so): Renamed from free_so_symbols.
279 All callers updated. Call target clear_so if it exists.
281 2013-05-06 Tom Tromey <tromey@redhat.com>
283 * ada-lang.c (ada_value_primitive_packed_val): Don't
285 * value.c (set_value_parent): Incref the new parent and decref
287 (value_copy, value_primitive_field): Use set_value_parent.
289 2013-05-06 Tom Tromey <tromey@redhat.com>
291 * dwarf2loc.c (invalid_synthetic_pointer): Move earlier.
292 (indirect_pieced_value): Call dwarf2_fetch_constant_bytes
294 * dwarf2loc.h (dwarf2_fetch_constant_bytes): Declare.
295 * dwarf2read.c (write_constant_as_bytes)
296 (dwarf2_fetch_constant_bytes): New functions.
298 2013-05-06 Tom Tromey <tromey@redhat.com>
300 * dwarf2read.c (dwarf2_const_value_data): Remove unused
302 (dwarf2_const_value_attr): Update.
304 2013-05-06 Tom Tromey <tromey@redhat.com>
306 * somread.c (som_symfile_offsets): Add 'const' to addrs.
307 * machoread.c (macho_symfile_offsets): Add 'const' to addrs.
308 * xcoffread.c (xcoff_symfile_offsets): Add 'const' to addrs.
311 2013-05-06 Tom Tromey <tromey@redhat.com>
313 * dwarf2read.c (dwarf2_const_value_attr): Use 'obstack', not
316 2013-05-06 Doug Evans <dje@google.com>
318 * dbxread.c (process_one_symbol): Constify section_offsets parameter.
319 * stabsread.h (process_one_symbol): Update declaration.
320 * dwarf2read.c (dw2_relocate): Constify new_offsets, delta parameters.
321 * elfread.c (elf_symfile_relocate_probe): Ditto.
322 * psymtab.c (relocate_psymtabs): Ditto.
323 * objfiles.c (objfile_relocate1): Constify new_offsets parameter.
324 (objfile_relocate): Ditto.
325 * objfiles.h (objfile_relocate): Update declaration.
326 * symfile.c (relative_addr_info_to_section_offsets): Constify
328 (default_symfile_offsets): Ditto.
329 (syms_from_objfile_1): Constify offsets parameter.
330 (syms_from_objfile): Ditto.
331 (symbol_file_add_with_addrs_or_offsets): Ditto.
332 (symfile_map_offsets_to_segments): Constify data parameter.
333 * symfile.h (struct quick_symbol_functions): Constify new_offsets,
334 delta parameters of member relocate.
335 (struct sym_probe_fns): Constify new_offsets,
336 delta parameters of member sym_relocate_probe.
337 (struct sym_fns): Constify section_addr_info parameter of member
339 (relative_addr_info_to_section_offsets): Update declaration.
340 (default_symfile_offsets): Ditto.
341 (syms_from_objfile): Ditto.
342 (symfile_map_offsets_to_segments): Ditto.
344 * symfile.c (syms_from_objfile_1): Use correct section count when
347 2013-05-06 Mike Frysinger <vapier@gentoo.org>
349 * common/linux-btrace.c (intel_supports_btrace): Fix indentation.
351 2013-05-06 Doug Evans <dje@google.com>
353 * psympriv.h (struct partial_symtab): Augment comment for member
356 2013-05-06 Joel Brobecker <brobecker@adacore.com>
358 Reimplement shared library support on ppc-aix...
359 * target.h (TARGET_OBJECT_AIX_LIBRARIES): New target_object enum.
360 * features/library-list-aix.dtd: New file.
361 * solib-aix.h, solib-aix.c: New file.
362 * rs6000-aix-tdep.c: #include "solib.h" and "solib-aix.h".
363 (rs6000_find_toc_address_hook): Delete.
364 (rs6000_push_dummy_call): Rewrite code setting the TOC value.
365 (rs6000_aix_init_osabi): Register solib_aix_so_ops.
366 * rs6000-nat.c: Remove "xcoffsolib.h" include. Include
368 (map_vmap, vmap_exec, vmap_ldinfo, add_vmap, objfile_symbol_add)
369 (vmap_symtab, fixup_breakpoints): Delete.
370 (rs6000_xfer_shared_libraries): New function.
371 (rs6000_xfer_partial): Add TARGET_OBJECT_AIX_LIBRARIES handling.
372 (vmap_secs, bss_data_overlap, vmap_add_symbols): Delete.
373 (xcoff_relocate_symtab, xcoff_relocate_core): Delete.
374 (rs6000_ptrace_ldinfo, rs6000_core_ldinfo)
375 (rs6000_xfer_shared_library): New function.
376 (find_toc_address): Delete.
377 (_initialize_rs6000_nat): Do not set rs6000_find_toc_address_hook.
378 * rs6000-tdep.h (rs6000_find_toc_address_hook): Remove.
379 * xcoffread.c (record_minimal_symbol): Reloate symbol address
380 before creating minimal symbol. Adjust function description
382 (scan_xcoff_symtab): Replace call to
383 prim_record_minimal_symbol_and_info by call to
384 record_minimal_symbol.
385 (xcoff_symfile_offsets): Reimplement mostly as a wrapper
386 around default_symfile_offsets.
387 * configure.tgt: Add solib-aix.o to gdb_target_obs for
389 * config/rs6000/nm-rs6000.h: Delete.
390 * config/powerpc/aix.mh (NAT_FILE): Delete.
391 (NATDEPFILES): Remove xcoffsolib.o.
392 * Makefile.in (XMLFILES): Add library-list-aix.dtd.
393 (ALL_TARGET_OBS): Add solib-aix.o.
394 (HFILES_NO_SRCDIR): Remove xcoffsolib.h and
395 config/rs6000/nm-rs6000.h. Add solib-aix.h.
396 (ALLDEPFILES): Add solib-aix.c. Remove xcoffsolib.c.
397 * xcoffsolib.h, xcoffsolib.c: Delete.
399 * solib.c (reload_shared_libraries): Remove reference to
400 SOLIB_CREATE_INFERIOR_HOOK.
401 * breakpoint.c (handle_solib_event): Remove reference to SOLIB_ADD.
402 (disable_breakpoints_in_shlibs): Remove reference to PC_SOLIB.
403 (momentary_bkpt_re_set): Replace SOLIB_ADD by solib_add in
405 * corelow.c (deprecated_core_resize_section_table): Delete.
406 * exec.c: Remove include of xcoffsolib.h".
407 (map_vmap, vmap): Delete.
408 (exec_close_1): Remove references to vmap.
409 (exec_file_attach): Remove vmap handling code, and reference
410 to DEPRECATED_IBM6000_TARGET.
411 (bfdsec_to_vmap): Delete.
412 (exec_files_info): Remove block of code handling VMAP.
413 * infcmd.c (post_create_inferior): Remove reference to
414 SOLIB_CREATE_INFERIOR_HOOK and SOLIB_ADD.
415 * infrun.c (follow_exec): Remove reference to
416 SOLIB_CREATE_INFERIOR_HOOK.
417 * stack.c (print_frame): Remove reference to PC_SOLIB.
418 * solib-dsbt.c (dsbt_current_sos): Adjust comment.
419 (dsbt_relocate_main_executable): Likewise.
420 * solib-frv.c (frv_current_sos): Likewise.
422 2013-05-06 Joel Brobecker <brobecker@adacore.com>
424 * sol-thread.c (rw_common): Cast BUF to "gdb_byte *" in calls
425 to target_write_memory and target_read_memory.
427 2013-05-06 Joel Brobecker <brobecker@adacore.com>
429 * darwin-nat.c (darwin_setup_fake_stop_event): New function.
430 (darwin_attach): Adjust using darwin_setup_fake_stop_event.
432 2013-05-06 Joel Brobecker <brobecker@adacore.com>
434 * darwin-nat.c: Replace all "%x" instances in format strings
435 into "0x%x" throughout.
437 2013-05-06 Joel Brobecker <brobecker@adacore.com>
439 * darwin-nat.c (darwin_mourn_inferior): Replace call to
440 gdb_assert by call to MACH_CHECK_ERROR.
441 (darwin_attach_pid): Raise an error rather than a failed
442 assertion when various system calls failed. Report a warning
443 instead of raising a failed assertion when PREV_NOT is not NULL
444 after call to mach_port_request_notification.
445 (darwin_ptrace_me): Raise an error rather than a failed
446 assertion when read returns nonzero.
448 2013-05-06 Joel Brobecker <brobecker@adacore.com>
450 * amd64-darwin-tdep.c: Remove #include "gdb_assert.h".
452 2013-05-05 Jan Kratochvil <jan.kratochvil@redhat.com>
454 * cleanups.c (restore_my_cleanups): New gdb_assert for SENTINEL_CLEANUP.
456 2013-05-05 Jan Kratochvil <jan.kratochvil@redhat.com>
458 * event-top.c (display_gdb_prompt): Call missing do_cleanups.
459 * infcmd.c (get_return_value) <!stop_regs>: Do not overwrite CLEANUP.
460 * symfile.c (symfile_bfd_open): New variable back_to. Do not leave
461 a stale cleanup. Fix double free of NAME.
463 2013-05-04 Eli Zaretskii <eliz@gnu.org>
465 * windows-nat.c (windows_delete_thread): Accept an additional
466 argument, the thread's exit code, and announce thread death when
467 print_thread_events is non-zero and we are deleting a thread that
468 is not the main thread.
469 (get_windows_debug_event): Pass thread exit code to
470 windows_delete_thread.
472 2013-05-03 Kevin Buettner <kevinb@redhat.com>
474 * v850-tdep.c (elf-bfd.h, elf/v850.h): Include.
475 (R_149_REGNUM, E_NUM_OF_V850E2_REGS, E_SELID_1_R0_REGNUM)
476 (E_SELID_1_R31_REGNUM, E_SELID_2_R0_REGNUM, E_SELID_2_R31_REGNUM)
477 (E_SELID_3_R0_REGNUM, E_SELID_3_R31_REGNUM, E_SELID_4_R0_REGNUM)
478 (E_SELID_4_R31_REGNUM, E_SELID_5_R0_REGNUM, E_SELID_5_R31_REGNUM)
479 (E_SELID_6_R0_REGNUM, E_SELID_6_R31_REGNUM, E_SELID_7_R0_REGNUM, E_SELID_7_R31_REGNUM)
480 (E_VR0_REGNUM, E_VR31_REGNUM, E_NUM_OF_V850E3V5_REGS): Define.
481 (v850_abi, V850_ABI_GCC, V850_ABI_RH850): New enum and constants.
482 (gdbarch_tdep): New struct.
483 (v850e2_register_name): Use E_NUM_OF_V850E2_REGS instead of
485 (v850e3v5_register_name): New function.
486 (v850_register_type): v850e3v5 vector registers are 64-bits wide.
487 (v850_use_struct_convention): Add `gdbarch' parameter. Add new
488 code handling the struct return conventions for the RH850 ABI.
490 (v850_eight_byte_align_p): New function.
491 (v850_push_call_dummy): Push structs by value, not by reference
492 for the RH850 ABI. Add support for eight byte alignment.
493 (v850_dbtrap_breakpoint_from_pc): New function.
494 (v850_gdbarch_init): Add ABI detection code. Register
495 v850e3v5_register_name for the v850e3v5 architecture. Set the
496 number of registers for v850e3v5. Register
497 v850_dbtrap_breakpoint_from_pc as appropriate.
498 (_initialize_gdbarch_init): Registration bfd_arch_v850_rh850.
500 2013-05-03 Doug Evans <dje@google.com>
502 * objfiles.c (objfile_relocate): Use gdb_bfd_count_sections instead
503 of bfd_count_sections.
504 * solib-target.c (solib_target_relocate_section_addresses): Ditto.
505 * symfile.c (default_symfile_offsets): Ditto.
506 (syms_from_objfile_1): Ditto. Make dummy addrs list an array of
507 one entry, not bfd_count_sections entries.
509 2013-05-03 Kevin Buettner <kevinb@redhat.com>
511 * rl78-tdep.c (rl78_register_reggroup_p): Include SP in the
512 `save' and `restore' register groups. Don't include SPL
513 or SPH in these groups.
514 (rl78_dwarf_reg_to_regnum): Adjust mapping for
515 RL78_PC_REGNUM. Add mappings for RL78_PSW_REGNUM,
516 RL78_ES_REGNUM, and RL78_CS_REGNUM.
517 (rl78_gdbarch_init): Set `dwarf2_addr_size' to 4. Invoke
518 dwarf2_append_unwinders().
520 2013-05-03 Philippe Waroquiers <philippe.waroquiers@skynet.be>
522 * break-catch-sig.c (signal_catchpoint_breakpoint_hit): Do not
523 ignore SIGINT and SIGTRAP in case these internal signals are
526 2013-05-01 Joel Brobecker <brobecker@adacore.com>
528 * darwin-nat.c (darwin_read_write_inferior): Change types
529 of parameters rdaddr and wraddr to "gdb_byte *". Change type
530 of copy_count to "mach_msg_type_number_t".
531 (darwin_read_dyld_info): Change type of parameter
532 rdaddr to "gdb_byte *".
534 2013-05-01 Joel Brobecker <brobecker@adacore.com>
536 * solib-ia64-hpux.c (ia64_hpux_read_dynamic_info): Change cast
537 of &info->load_map from "char *" to "gdb_byte *".
539 2013-05-01 Joel Brobecker <brobecker@adacore.com>
541 * ia64-tdep.c (ia64_access_fpreg): Change cast of val
542 from "char *" to "gdb_byte *".
543 (ia64_access_rse_fpreg, ia64_access_mem): Likewise.
545 2013-04-30 Doug Evans <dje@google.com>
547 * dwarf2read.c (lookup_dwo_unit): Return NULL if DWO not found.
548 (init_cutu_and_read_dies): Flag a complaint, not error, for bad
549 DWO stub. If DWO isn't found, just use stub.
550 (lookup_dwo_cutu): Don't try DWO if there's a DWP file.
552 * dwarf2read.c (dw2_find_symbol_file): Initialize filename before
553 calling init_cutu_and_read_dies.
555 2013-03-27 Walfred Tedeschi <walfred.tedeschi@intel.com>
557 * target-descriptions.c (maint_print_c_tdesc_cmd):
558 Add case to parse structures as register types and
561 2013-04-30 Walfred Tedeschi <walfred.tedeschi@intel.com>
563 * MAINTAINERS (Write After Approval): Add myself to the list.
565 2013-04-30 Joel Brobecker <brobecker@adacore.com>
567 * sol-thread.c (rw_common): Change type of parameter "buf"
569 (ps_pdwrite, ps_ptwrite): Cast parameter "buf" in call to
570 rw_common to "gdb_byte *" instead of "char *".
572 2013-04-30 Joel Brobecker <brobecker@adacore.com>
574 * sol-thread.c (info_cb) [ti.ti_startfunc != 0]: Change type
575 of local variable msym to const struct bound_minimal_symbol.
576 Adjust use accordingly.
577 [ti.ti_state == TD_THR_SLEEP]: Likewise.
579 2013-04-30 Samuel Thibault <samuel.thibault@gnu.org>
581 * i386gnu-nat.c (CREG_OFFSET): New macro.
582 (creg_offset): New array.
583 (CREG_ADDR): Use creg_offset instead of reg_offset.
585 2013-04-30 Joel Brobecker <brobecker@adacore.com>
587 * mep-tdep.c (mep_write_pc): Delete.
588 (mep_gdbarch_init): Remove call to set_gdbarch_write_pc.
589 Add call to set_gdbarch_pc_regnum.
591 2013-04-30 Joel Brobecker <brobecker@adacore.com>
593 * common/filestuff.c: Replace #include <dirent.h> by
594 #include "gdb_dirent.h".
596 2013-04-30 Joel Brobecker <brobecker@adacore.com>
598 * common/filestuff.c: Replace #include <sys/stat.h> by
599 #include "gdb_stat.h".
601 2013-04-29 Pierre Muller <muller@sourceware.org>
603 * dwarf2read.c (handle_DW_AT_stmt_list): Avoid ARI warning for
604 editCase function rule.
605 (get_DW_AT_signature_type): Likewise.
607 2013-04-29 Joel Brobecker <brobecker@adacore.com>
609 * m32r-tdep.c (m32r_write_pc): Delete.
610 (m32r_gdbarch_init): Remove call to set_gdbarch_write_pc.
611 Add call to set_gdbarch_pc_regnum.
613 2013-04-29 Pierre Muller <muller@sourceware.org>
615 * ./contrib/ari/gdb_ari.sh (editCase rule): Fix spelling error.
617 2013-04-29 Joel Brobecker <brobecker@adacore.com>
619 * dwarf2read.c (get_DW_AT_signature_type): Add ARI marker.
621 2013-04-28 Yao Qi <yao@codesourcery.com>
623 * solib-dsbt.c (fetch_loadmap): Re-indent.
624 (displacement_from_map, enable_break2): Likewise.
625 (dsbt_relocate_section_addresses): Likewise.
627 2013-04-26 Joel Brobecker <brobecker@adacore.com>
631 2013-04-25 Andreas Kaufmann <Andreas.Kaufmann@synopsys.com>
634 * dwarf2read.c (process_full_comp_unit): Always create a static
637 2013-04-25 Hui Zhu <hui@codesourcery.com>
639 * breakpoint.c (build_target_command_list): Change loc->cond_bytecode
640 to loc->cmd_bytecode.
642 2013-04-24 Doug Evans <dje@google.com>
644 * dwarf2read.c (setup_type_unit_groups): Fix comment.
646 2013-04-22 Keith Seitz <keiths@redhat.com>
648 * tracepoint.c (trace_save): Call the writer's start method.
650 2013-04-24 Muhammad Bilal <mbilal@codesourcery.com>
653 * cli/cli-decode.c (lookup_command): Show an error if there is no space
656 2013-04-23 Tom Tromey <tromey@redhat.com>
658 * common/filestuff.c: Check USE_WIN32API before including
660 (HAVE_F_GETFD): New define.
661 (mark_cloexec): Check HAVE_F_GETFD.
662 (gdb_open_cloexec): Change 'mode' to unsigned long.
663 (gdb_socketpair_cloexec): Check HAVE_SOCKETPAIR.
664 (gdb_pipe_cloexec): Check HAVE_PIPE.
665 * common/filestuff.h (gdb_open_cloexec): Change 'mode' to unsigned
668 2013-04-23 Hui Zhu <hui@codesourcery.com>
671 * breakpoint.c (bpstat_what): Add BPSTAT_WHAT_SINGLE to bp_dprintf.
673 2013-04-23 Hui Zhu <hui@codesourcery.com>
676 * breakpoint.c (dprintf_print_recreate): New.
677 (save_breakpoints): Let it not save dprintf commands.
678 (initialize_breakpoint_ops): Set dprintf_print_recreate.
680 2013-04-22 Tom Tromey <tromey@redhat.com>
683 * Makefile.in (SFILES): Add filestuff.c
684 (COMMON_OBS): Add filestuff.o.
685 (filestuff.o): New target.
686 * auto-load.c (auto_load_objfile_script_1): Use
688 * auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
689 * cli/cli-cmds.c (shell_escape): Call close_most_fds.
690 * cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
691 * common/agent.c (gdb_connect_sync_socket): Use
693 * common/filestuff.c: New file.
694 * common/filestuff.h: New file.
695 * common/linux-osdata.c (linux_common_core_of_thread)
696 (command_from_pid, commandline_from_pid, print_source_lines)
697 (linux_xfer_osdata_shm, linux_xfer_osdata_sem)
698 (linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
700 * common/linux-procfs.c (linux_proc_get_int)
701 (linux_proc_pid_has_state): Use gdb_fopen_cloexec.
702 * config.in, configure: Rebuild.
703 * configure.ac: Don't check for sys/socket.h. Check for
705 * corelow.c (core_open): Use gdb_open_cloexec.
706 * dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
707 * fork-child.c (fork_inferior): Call close_most_fds.
708 * gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
709 * inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
710 * linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
711 Use gdb_fopen_cloexec.
712 (linux_proc_xfer_partial, linux_proc_xfer_spu): Use
714 (linux_async_pipe): Use gdb_pipe_cloexec.
715 * remote-fileio.c (remote_fileio_func_open): Use
717 * remote.c (remote_file_put, remote_file_get): Use
719 * ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
721 * ser-tcp.c (net_open): Use gdb_socket_cloexec.
722 * ser-unix.c (hardwire_open): Use gdb_open_cloexec.
723 * solib.c (solib_find): Use gdb_open_cloexec.
724 * source.c (openp, find_and_open_source): Use gdb_open_cloexec.
725 * tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
726 (tfile_open): Use gdb_open_cloexec.
727 * tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
728 * ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
729 * xml-support.c (xml_fetch_content_from_file): Use
731 * main.c (captured_main): Call notice_open_fds.
733 2013-04-22 Edjunior Machado <emachado@linux.vnet.ibm.com>
735 * remote-sim.c (dump_mem): Change the type of 'buf' parameter from
736 'char *' to 'gdb_byte *'.
737 (gdbsim_store_register): Change the type of 'tmp' from 'char' to
740 2013-04-22 Yao Qi <yao@codesourcery.com>
742 * infrun.c: Fix typo in comment.
744 2013-04-22 Andrew Haley <aph@redhat.com>
746 * arm-tdep.c (BranchDest): Cast result as "unsigned long",
749 2013-04-20 Yao Qi <yao@codesourcery.com>
751 * ctf.c (ctf_fetch_registers): Change the type of 'regs' from
752 'char *' to 'gdb_byte *'. Cast the return value of
753 'bt_ctf_get_char_array' to 'gdb_byte *'.
755 2013-04-19 Pedro Alves <palves@redhat.com>
757 * configure.ac (build_warnings): Replace -Wno-pointer-sign with
759 * configure: Regenerate.
761 2013-04-19 Pedro Alves <palves@redhat.com>
763 * ser-tcp.c (net_read_prim): Cast second argument to recv to
766 2013-04-19 Pedro Alves <palves@redhat.com>
768 * monitor.c (monitor_write_memory, monitor_write_memory_bytes):
769 Change type of 'myaddr' parameter to gdb_byte pointer.
770 (monitor_write_memory_longlongs): Likewise. Cast 'myaddr' pointer
771 to 'long long' pointer instead of to 'unsigned long long'.
772 (monitor_write_memory_block, monitor_read_memory_single)
773 (monitor_read_memory): Change type of 'myaddr' parameter to
776 2013-04-19 Pedro Alves <palves@redhat.com>
778 * record.c (validate_history_size): Make parameter 'setting'
781 2013-04-19 Pedro Alves <palves@redhat.com>
783 * ctf.c (ctf_write_uploaded_tsv, ctf_write_uploaded_tp): Add casts
786 2013-04-19 Pedro Alves <palves@redhat.com>
788 * cp-valprint.c (cp_print_class_member): Change type of 'fieldno'
791 2013-04-19 Pedro Alves <palves@redhat.com>
793 * ada-lang.c (print_it_exception): Add cast to gdb_byte *.
794 * ada-tasks.c (read_fat_string_value): Likewise.
796 2013-04-19 Pedro Alves <palves@redhat.com>
798 * dwarf2-frame.c (execute_cfa_program): Make 'bytes_read' local
799 unsigned. Pass 'tmp' to safe_read_uleb128 instead of the signed
800 'offset', and adjust.
802 2013-04-19 Pedro Alves <palves@redhat.com>
804 * dwarf2read.c (dwarf2_get_dwz_file): Add cast to const char *.
805 (read_index_from_section): Add cast to 'char *'.
807 2013-04-19 Pedro Alves <palves@redhat.com>
809 * xcoffread.c (xcoff_initial_scan): Add cast to 'char *'.
811 2013-04-19 Pedro Alves <palves@redhat.com>
813 * coff-pe-read.c (read_pe_exported_syms): Handle strings as char.
815 2013-04-19 Pedro Alves <palves@redhat.com>
817 * record-full.c (record_full_get_bookmark): Change local 'ret'
818 type to char * and add cast to gdb_byte *.
819 (record_full_goto_bookmark): Handle 'bookmark' argument as a
821 * reverse.c (goto_bookmark_command): Add casts to gdb_byte *.
823 2013-04-19 Pedro Alves <palves@redhat.com>
825 * python/py-inferior.c (infpy_write_memory): Add cast to gdb_byte
826 * python/py-prettyprint.c (print_string_repr): Change type of
827 'output' local to char *. Add cast to gdb_byte * in
828 LA_PRINT_STRING call.
829 (print_children): Change type of 'output' local to char *.
830 * python/py-value.c (valpy_string): Add cast to const char * in
831 PyUnicode_Decode call.
833 2013-04-19 Pedro Alves <palves@redhat.com>
835 * remote-mips.c (mips_cksum): Rename 'data' parameter to 'datastr'
836 and change its type to 'const char *'. Adjust.
837 (mips_send_packet): Add cast to 'char *', and remove cast to
839 (mips_receive_packet): Remove cast to 'unsigned char *'.
840 (mips_load_srec): Use bfd_byte.
841 (pmon_makeb64, pmon_zeroset): Make 'chksum' parameter unsigned.
842 (pmon_checkset): Make 'value' parameter unsigned.
844 2013-04-19 Pedro Alves <palves@redhat.com>
846 * common/agent.c (agent_run_command): Add cast to gdb_byte *.
848 2013-04-19 Pedro Alves <palves@redhat.com>
850 * remote.c (remote_write_bytes_aux, compare_sections_command)
852 (remote_search_memory, remote_hostio_pwrite, remote_hostio_pread)
853 (remote_hostio_readlink, remote_bfd_iovec_pread)
854 (remote_set_trace_notes): Use gdb_byte when RSP buffer is used as
855 binary buffer, and char when buffer is used as string.
856 * tracepoint.c (encode_source_string, tfile_write_uploaded_tp)
857 (trace_save, tfile_open, traceframe_walk_blocks)
858 (tfile_fetch_registers): Likewise.
860 2013-04-19 Pedro Alves <palves@redhat.com>
862 * ser-base.c (ser_base_write): Change prototype -- take 'void *'
863 buffer and size_t size. Adjust.
864 * ser-base.h (ser_base_write): Adjust.
865 * ser-go32.c (cnts): Change type to size_t.
866 (dos_write): Change prototype -- take 'void *'
867 buffer and size_t size. Adjust.
868 (dos_info): Print elements of 'cnts' as unsigned long.
869 * serial.c (serial_write): Likewise.
870 * serial.h (serial_write): Adjust.
871 (struct serial_ops) <write>: Change prototype -- take 'void *'
872 buffer and size_t size. Adjust.
874 2013-04-19 Pedro Alves <palves@redhat.com>
876 * c-lang.c (evaluate_subexp_c): Cast result of obstack_base to
878 * linux-tdep.c (linux_make_mappings_corefile_notes): Likewise.
880 2013-04-19 Pedro Alves <palves@redhat.com>
882 * alpha-tdep.c (alpha_extract_return_value): Use
883 regcache_cooked_read_unsigned to read 'v0'.
885 2013-04-19 Pedro Alves <palves@redhat.com>
887 * xtensa-tdep.c (execute_l32e, execute_s32e): Change type of
888 parameters 'at', 'as' and 'offset' to uint32_t.
890 2013-04-19 Pedro Alves <palves@redhat.com>
892 * aarch64-tdep.c (aarch64_analyze_prologue): Change type of local
893 'is64' to signed 'int'.
895 2013-04-19 Pedro Alves <palves@redhat.com>
897 * s390-tdep.c (is_rs, is_rsy, is_rx, is_rxy): Change type of 'd2'
900 2013-04-19 Pedro Alves <palves@redhat.com>
902 * ppc-linux-tdep.c (ppc_skip_trampoline_code): Change local
903 'insnbuf' buffer type to unsigned int[].
905 2013-04-19 Pedro Alves <palves@redhat.com>
907 * mips-tdep.c (mips_read_pc): Change local 'pc' type to LONGEST.
909 2013-04-19 Pedro Alves <palves@redhat.com>
911 * mep-tdep.c (mep_get_insn): Change 'insn' parameter type to
914 2013-04-19 Pedro Alves <palves@redhat.com>
916 * alpha-tdep.c (heuristic_fence_post): Change type to int.
917 (alpha_heuristic_proc_start): Adjust to check -1 instead of
919 * mips-tdep.c (heuristic_fence_post): Change type to int.
920 (heuristic_proc_start): Adjust to check -1 instead of UINT_MAX.
922 2013-04-19 Pedro Alves <palves@redhat.com>
924 * cris-tdep.c (usr_cmd_cris_version): Make unsigned.
925 (struct gdbarch_tdep) <cris_version>: Make unsigned.
926 (cris_spec_reg_applicable, cris_gdbarch_init): Adjust locals.
928 2013-04-19 Pedro Alves <palves@redhat.com>
930 * avr-tdep.c (avr_io_reg_read_command): New local 'bufstr'. Use
931 it to get a string view of the byte buffer.
932 * i386-cygwin-tdep.c (core_process_module_section): Change local 'buf'
933 type to gdb_byte *. Adjust.
934 * linux-tdep.c (linux_info_proc, linux_find_memory_regions_full):
935 Change local to char *.
936 * solib-darwin.c (find_program_interpreter): Change return type to
938 (darwin_solib_get_all_image_info_addr_at_init): Adjust.
939 * solib-dsbt.c (enable_break2): Change local 'buf' to char *.
940 * solib-frv.c (enable_break2): Change local 'buf' to char *.
941 * solib-spu.c (spu_current_sos): Add gdb_byte * cast.
942 * solib-svr4.c (find_program_interpreter): Change return type to
944 (enable_break): Change local 'interp_name' to char *.
945 * spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
946 * spu-tdep.c (spu_pseudo_register_read_spu): Add cast to 'char *'.
947 (spu_pseudo_register_write_spu): Use char for string buffer.
949 (info_spu_event_command, info_spu_signal_command): Add casts to
952 2013-04-19 Pedro Alves <palves@redhat.com>
954 * aarch64-tdep.c (aarch64_default_breakpoint): Change type to
956 (aarch64_breakpoint_from_pc): Change return type to gdb_byte *.
957 * ada-lang.c (ada_value_assign): Use gdb_byte.
958 * alphanbsd-tdep.c (sigtramp_retcode): Change type to gdb_byte[].
959 (alphanbsd_sigtramp_offset): Use gdb_byte.
960 * arm-linux-tdep.c (arm_linux_arm_le_breakpoint)
961 (arm_linux_arm_be_breakpoint, eabi_linux_arm_le_breakpoint)
962 (eabi_linux_arm_be_breakpoint, arm_linux_thumb_be_breakpoint)
963 (arm_linux_thumb_le_breakpoint, arm_linux_thumb2_be_breakpoint)
964 (arm_linux_thumb2_le_breakpoint): Change type to gdb_byte[].
965 * arm-tdep.c (arm_stub_unwind_sniffer)
966 (arm_displaced_init_closure): Use gdb_byte.
967 (arm_default_arm_le_breakpoint, arm_default_arm_be_breakpoint)
968 (arm_default_thumb_le_breakpoint)
969 (arm_default_thumb_be_breakpoint): Change type to gdb_byte[].
970 * arm-tdep.h (struct gdbarch_tdep) <arm_breakpoint,
971 thumb_breakpoint, thumb2_breakpoint>: Change type to gdb_byte *.
972 * arm-wince-tdep.c (arm_wince_le_breakpoint)
973 (arm_wince_thumb_le_breakpoint): Change type to gdb_byte[].
974 * armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint)
975 (arm_nbsd_arm_be_breakpoint, arm_nbsd_thumb_le_breakpoint)
976 (arm_nbsd_thumb_be_breakpoint): Change type to gdb_byte[].
977 * armobsd-tdep.c (arm_obsd_thumb_le_breakpoint)
978 (arm_obsd_thumb_be_breakpoint): Change type to gdb_byte[].
979 * cris-tdep.c (push_stack_item, cris_push_dummy_call)
980 (cris_store_return_value, cris_extract_return_value): Use
982 (constraint): Change type of parameter to char * from signed
984 * dwarf2loc.c (read_pieced_value, write_pieced_value): Change type
985 of local buffer to gdb_byte *.
986 * dwarf2read.c (read_index_from_section): Use gdb_byte.
987 (create_dwp_hash_table): Change type of locals to gdb_byte *.
988 (add_address_entry): Change type of local buffer to gdb_byte[].
989 * frv-tdep.c (frv_adjust_breakpoint_address, find_func_descr)
990 (frv_push_dummy_call): Use gdb_byte.
991 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code)
992 (hppa_hpux_supply_ss_fpblock, hppa_hpux_supply_ss_wide)
993 (hppa_hpux_supply_save_state): Use gdb_byte.
994 * hppa-tdep.c (hppa32_push_dummy_call)
995 (hppa64_convert_code_addr_to_fptr): Use gdb_byte.
996 * ia64-tdep.c (extract_bit_field, replace_bit_field)
997 (slotN_contents, replace_slotN_contents): Change type of parameter
999 (fetch_instruction, ia64_pseudo_register_write)
1000 (ia64_register_to_value, ia64_value_to_register)
1001 (ia64_extract_return_value, ia64_store_return_value)
1002 (ia64_push_dummy_call): Use gdb_byte.
1003 * m32c-tdep.c (m32c_return_value): Remove cast.
1004 * m68hc11-tdep.c (m68hc11_pseudo_register_write)
1005 (m68hc11_push_dummy_call, m68hc11_store_return_value): Use
1007 * mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use gdb_byte.
1008 * mn10300-tdep.c (mn10300_store_return_value)
1009 (mn10300_breakpoint_from_pc, mn10300_push_dummy_call): Use
1011 * moxie-tdep.c (moxie_process_readu): Use gdb_byte.
1012 (moxie_process_record): Remove casts.
1013 * ppc-ravenscar-thread.c (supply_register_at_address)
1014 (ppc_ravenscar_generic_store_registers): Use gdb_byte.
1015 * ravenscar-thread.c (get_running_thread_id): Use gdb_byte.
1016 * remote-m32r-sdi.c (m32r_fetch_register): Use gdb_byte.
1017 * remote-mips.c (mips_xfer_memory): Use gdb_byte.
1018 * remote.c (compare_sections_command): Use gdb_byte.
1019 * score-tdep.c (score7_free_memblock): Change type of parameter to
1021 * sh-tdep.c (sh_justify_value_in_reg): Change return type to
1022 gdb_byte *. Use gdb_byte.
1023 (sh_push_dummy_call_fpu): Use gdb_byte.
1024 (sh_extract_return_value_nofpu, sh_extract_return_value_fpu)
1025 (sh_store_return_value_nofpu, sh_store_return_value_fpu)
1026 (sh_register_convert_to_virtual, sh_register_convert_to_raw):
1027 Change parameter type to 'gdb_byte *'. Use gdb_byte.
1028 (sh_pseudo_register_read, sh_pseudo_register_write): Use gdb_byte.
1029 * sh64-tdep.c (sh64_push_dummy_call): Use gdb_byte.
1030 (sh64_store_return_value, sh64_register_convert_to_virtual):
1031 Change parameter type to 'gdb_byte *'. Use gdb_byte.
1032 (sh64_pseudo_register_write): Use gdb_byte.
1033 * solib-darwin.c (darwin_current_sos): Add casts to 'gdb_byte *'.
1034 * solib-irix.c (fetch_lm_info): Likewise. Use gdb_byte for byte
1036 (irix_current_sos): Use gdb_byte.
1037 * solib-som.c (som_current_sos): Use gdb_byte.
1038 * sparc-ravenscar-thread.c (supply_register_at_address)
1039 (sparc_ravenscar_generic_store_registers): Use gdb_byte.
1040 * spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
1041 * spu-tdep.c (spu_get_overlay_table): Use gdb_byte.
1042 * tic6x-tdep.c (tic6x_breakpoint_from_pc): Change return type to
1044 * tic6x-tdep.h (struct gdbarch_tdep) <breakpoint>: Change type to
1046 * tracepoint.c (tfile_fetch_registers): Use gdb_byte.
1047 * xstormy16-tdep.c (xstormy16_extract_return_value)
1048 (xstormy16_store_return_value): Change parameter type to
1049 'gdb_byte *'. Adjust.
1050 (xstormy16_push_dummy_call): Use gdb_byte.
1051 * xtensa-tdep.c (xtensa_scan_prologue, call0_ret)
1052 (call0_analyze_prologue, execute_code): Use gdb_byte.
1054 2013-04-19 Vladimir Kargov <kargov@gmail.com>
1055 Pedro Alves <palves@redhat.com>
1057 * i387-tdep.c (i387_print_float_info): Use gdb_byte for pointer to
1060 2013-04-17 Doug Evans <dje@google.com>
1062 * dwarf2read.c (struct signatured_type): New member type.
1063 (struct attribute): Replace member signatured_type with signature.
1064 (DW_SIGNATURE): Replaces DW_SIGNATURE_TYPE.
1065 (read_call_site_scope): Call follow_die_ref instead of
1066 follow_die_ref_or_sig.
1067 (read_structure_type): Rewrite handling of signatured types.
1068 (read_enumeration_type): Ditto.
1069 (read_attribute_value): Update.
1070 (build_error_marker_type): New function.
1071 (lookup_die_type): Add assert. Rewrite handling of signatured types.
1072 Don't call error for bad types, just build an error marker type.
1073 (dump_die_shallow): Update.
1074 (follow_die_sig_1): Renamed from follow_die_sig.
1075 Don't call error for bad types, instead return NULL.
1076 (follow_die_sig): New function.
1077 (get_signatured_type, get_DW_AT_signature_type): New functions.
1079 2013-04-17 Yufeng Zhang <yufeng.zhang@arm.com>
1081 * aarch64-tdep.c (aarch64_write_pc): Removed.
1082 (aarch64_gdbarch_init): Remove set_gdbarch_write_pc of the above
1085 2013-04-17 Yao Qi <yao@codesourcery.com>
1087 * top.c (print_gdb_configuration): Print configure-time
1088 parameter on using libbabeltrace or not.
1090 2013-04-16 Pedro Alves <palves@redhat.com>
1092 * copyright.py (EXCLUDE_LIST): Add gdb/common/glibc_thread_db.h.
1094 2013-04-16 Pedro Alves <palves@redhat.com>
1096 * common/glibc_thread_db.h: Update from upstream glibc
1097 (git 568035b7874a099087b77f7bba3e36a1173787b0).
1099 2013-04-16 Pedro Alves <palves@redhat.com>
1101 * common/gdb_thread_db.h [!HAVE_THREAD_DB_H]: Factor out to ...
1102 * common/glibc_thread_db.h: ... this new file ...
1103 * common/gdb_thread_db.h [!HAVE_THREAD_DB_H]: ... and include it.
1105 2013-04-16 Will Newton <will.newton@gmail.com>
1106 Pedro Alves <palves@redhat.com>
1110 * common/gdb_thread_db.h (LIBTHREAD_DB_SO)
1111 (LIBTHREAD_DB_SEARCH_PATH): Move outside of #ifdef
1114 2013-04-16 Pedro Alves <palves@redhat.com>
1115 Eli Zaretskii <eliz@gnu.org>
1117 * NEWS: Mention "set foo unlimited".
1119 2013-04-15 Doug Evans <dje@google.com>
1121 * dwarf2read.c (struct dwo_file): Replace member "cus" with "cu".
1122 (struct create_dwo_cu_data): Renamed from create_dwo_info_table_data.
1123 (create_dwo_cu_reader): Renamed from
1124 create_dwo_debug_info_hash_table_reader.
1125 (create_dwo_cu): Renamed from create_dwo_debug_info_hash_table.
1126 Remove support for multiple CUs in a DWO file.
1127 (open_and_init_dwo_file, lookup_dwo_cutu): Update.
1129 * dwarf2read.c (create_debug_types_hash_table): Use hex_string
1131 (lookup_dwo_unit, create_dwo_debug_info_hash_table_reader): Ditto.
1132 (create_dwo_in_dwp): Ditto.
1134 2013-04-15 Tom Tromey <tromey@redhat.com>
1136 * NEWS: Move recent entries into "since 7.6" section.
1138 2013-04-15 Tom Tromey <tromey@redhat.com>
1142 * break-catch-throw.c (struct exception_catchpoint)
1143 <exception_rx, pattern>: New fields.
1144 (fetch_probe_arguments, dtor_exception_catchpoint)
1145 (check_status_exception_catchpoint)
1146 (print_one_detail_exception_catchpoint): New functions.
1147 (handle_gnu_v3_exceptions): Add "except_rx" argument.
1148 Compile regular expression if needed.
1149 (extract_exception_regexp): New function.
1150 (catch_exception_command_1): Use extract_exception_regexp.
1151 (compute_exception): Use fetch_probe_arguments.
1152 (initialize_throw_catchpoint_ops): Set dtor, print_one_detail,
1153 and check_status fields.
1154 * cp-abi.c (cplus_typename_from_type_info): New function.
1155 * cp-abi.h (cplus_typename_from_type_info): Declare.
1156 (struct cp_abi_ops) <get_typename_from_type_info>: New field.
1157 * gdb_regex.h (compile_rx_or_error): Declare.
1158 * gnu-v3-abi.c (gnuv3_get_typename_from_type_info): Update
1160 (init_gnuv3_ops): Set get_type_from_type_info field.
1161 * probe.c (compile_rx_or_error): Move...
1162 * utils.c (compile_rx_or_error): ... here.
1164 2013-04-15 Tom Tromey <tromey@redhat.com>
1168 * break-catch-throw.c (compute_exception): New function.
1169 (exception_funcs): New global.
1170 (_initialize_break_catch_throw): Create $_exception.
1171 * cp-abi.c (cplus_type_from_type_info): New function.
1172 * cp-abi.h (cplus_type_from_type_info): Declare.
1173 (struct cp_abi_ops) <get_type_from_type_info>: New field.
1174 * gnu-v3-abi.c (gnuv3_get_typename_from_type_info)
1175 (gnuv3_get_type_from_type_info): New functions.
1176 (init_gnuv3_ops): Set get_type_from_type_info ABI field.
1178 2013-04-15 Tom Tromey <tromey@redhat.com>
1180 * break-catch-throw.c (struct exception_names): New.
1181 (exception_functions): Change type.
1182 (re_set_exception_catchpoint): Look for SDT probes.
1184 2013-04-15 Tom Tromey <tromey@redhat.com>
1187 * break-catch-throw.c (exception_functions): New global.
1188 (gnu_v3_exception_catchpoint_ops): Move earlier.
1189 (struct exception_catchpoint): New.
1190 (classify_exception_breakpoint): Rewrite.
1191 (re_set_exception_catchpoint): New function.
1192 (handle_gnu_v3_exceptions): Return void. Use init_catchpoint.
1193 Allocate a struct exception_catchpoint.
1194 (catch_exception_command_1): Update.
1195 (initialize_throw_catchpoint_ops): Set 're_set' method.
1197 2013-04-15 Tom Tromey <tromey@redhat.com>
1199 * Makefile.in (SFILES): Add break-catch-throw.c
1200 (COMMON_OBS): Add break-catch-throw.o.
1201 * break-catch-throw.c: New file.
1202 * breakpoint.c: Move exception-catching code to new file.
1203 (ep_parse_optional_if_clause): No longer static.
1204 * breakpoint.h (ep_parse_optional_if_clause): Declare.
1206 2013-04-15 Tom Tromey <tromey@redhat.com>
1210 * breakpoint.c (watchpoint_exp_is_const): Add OP_TYPEID.
1211 * c-exp.y (TYPEID): New token.
1212 (exp): Add new TYPEID productions.
1213 (ident_tokens): Add "typeid".
1214 * cp-abi.c (cplus_typeid, cplus_typeid_type): New functions.
1215 * cp-abi.h (cplus_typeid, cplus_typeid_type): Declare.
1216 (struct cp_abi_ops) <get_typeid, get_typeid_type>: New fields.
1217 * eval.c (evaluate_subexp_standard) <OP_TYPEID>: New case.
1218 * expprint.c (dump_subexp_body_standard) <OP_TYPEID>: New
1220 * gnu-v3-abi.c (std_type_info_gdbarch_data): New global.
1221 (build_std_type_info_type, gnuv3_get_typeid_type)
1222 (gnuv3_get_typeid): New functions.
1223 (init_gnuv3_ops): Initialize std_type_info_gdbarch_data. Set
1224 new fields on ABI object.
1225 * parse.c (operator_length_standard) <OP_TYPEID>: New case.
1226 * std-operator.def (OP_TYPEID): New.
1228 2013-04-15 Tom Tromey <tromey@redhat.com>
1230 * elfread.c (elf_symtab_read): Install versioned symbol under
1231 unversioned name as well.
1233 2013-04-15 Tom Tromey <tromey@redhat.com>
1236 * c-lang.c (cplus_language_defn): Use gdb_demangle.
1237 * c-typeprint.c (c_type_print_base): Use gdb_demangle.
1238 * cp-support.c (mangled_name_to_comp): Use gdb_demangle.
1239 (gdb_demangle): New function.
1240 * cp-support.h (gdb_demangle): Declare.
1241 * dwarf2read.c (dwarf2_physname, fixup_partial_die)
1242 (dwarf2_name): Use gdb_demangle.
1243 * gdbtypes.c (check_stub_method): Use gdb_demangle.
1244 * gnu-v3-abi.c (gnuv3_rtti_type): Strip @plt and version
1246 (gnuv3_print_method_ptr): Use gdb_demangle.
1247 * jv-lang.c (java_demangle): Use gdb_demangle.
1248 * jv-typeprint.c (java_type_print_base): Use gdb_demangle.
1249 * language.c (unk_lang_demangle): Use gdb_demangle.
1250 * symtab.c (symbol_find_demangled_name)
1251 (demangle_for_lookup): Use gdb_demangle.
1253 2013-04-15 Tom Tromey <tromey@redhat.com>
1257 * breakpoint.c (enum exception_event_kind) <EX_EVENT_RETHROW>:
1259 (classify_exception_breakpoint): New function.
1260 (print_it_exception_catchpoint, print_one_exception_catchpoint)
1261 (print_mention_exception_catchpoint)
1262 (print_recreate_exception_catchpoint, handle_gnu_v3_exceptions)
1263 (catch_exception_command_1): Handle "rethrow" catchpoint.
1264 (catch_rethrow_command): New function.
1265 (_initialize_breakpoint): Add "catch rethrow" command.
1267 2013-04-15 Pierre Muller <muller@sourceware.org>
1269 * contrib/ari/gdb_ari.sh (write_pc rule): Do not consider
1270 set_gdbarch_write_pc as deprecated anymore.
1272 2013-04-15 Joel Brobecker <brobecker@adacore.com>
1274 * spu-tdep.c (spu_write_pc): Add empty line after local variable
1277 2013-04-13 Yao Qi <yao@codesourcery.com>
1279 * ctf.c (_initialize_ctf): Include "completer.h".
1280 Call add_target_with_completer instead of add_target.
1282 2013-04-12 Jan Kratochvil <jan.kratochvil@redhat.com>
1284 Fix GDB regression related to PR binutils/14813.
1285 * jit.c (mem_bfd_iovec_close): Return 0 for success.
1286 * minidebug.c (lzma_close): Add return value comment.
1287 * remote.c (remote_bfd_iovec_close): Return 0 for success.
1288 * solib-spu.c (spu_bfd_iovec_close): Likewise.
1289 * spu-linux-nat.c (spu_bfd_iovec_close): Likewise.
1291 2013-04-12 Jan Kratochvil <jan.kratochvil@redhat.com>
1293 * config.in: Regenerate.
1295 2013-04-12 Tom Tromey <tromey@redhat.com>
1297 * dwarf2-frame.c (struct comp_unit) <dwarf_frame_buffer>: Now
1299 * dwarf2read.c (struct dwarf2_section_info) <buffer>: Now const.
1300 (struct die_reader_specs) <buffer>: Likewise.
1301 (die_reader_func_ftype): Make 'info_ptr' const.
1302 (struct line_header) <include_dirs, statement_program_start,
1303 statement_program_end>: Now const.
1304 (struct file_entry) <name>: Likewise.
1305 (struct partial_die_info) <sibling>: Likewise.
1306 (struct dwarf_block) <data>: Likewise.
1307 (dwarf2_read_section): Remove cast.
1308 (dwarf2_get_section_info): Make 'bufp' const.
1309 (read_index_from_section): Constify.
1310 (dw2_get_file_names_reader): Make 'info_ptr' const.
1311 (dw2_get_primary_filename_reader): Likewise.
1312 (read_comp_unit_head): Make 'info_ptr' and return type const.
1313 (read_and_check_comp_unit_head, read_and_check_type_unit_head):
1315 (read_abbrev_offset): Constify.
1316 (dwarf2_create_include_psymtab): Make 'name' const.
1317 (create_debug_types_hash_table): Update.
1318 (read_cutu_die_from_dwo): Make 'result_info_ptr' const.
1319 (init_cutu_and_read_dies, init_cutu_and_read_dies_no_follow):
1321 (process_psymtab_comp_unit_reader, build_type_psymtabs_reader)
1322 (load_partial_comp_unit_reader): Make 'info_ptr' const.
1323 (read_comp_units_from_section): Constify.
1324 (peek_abbrev_code, peek_die_abbrev, skip_children, skip_one_die)
1325 (locate_pdi_sibling, load_full_comp_unit_reader): Make 'info_ptr'
1327 (dwarf2_compute_name, setup_type_unit_groups): Constify.
1328 (create_dwo_debug_info_hash_table): Make 'info_ptr' const.
1329 (create_dwp_hash_table, dwarf2_ranges_read)
1330 (dwarf2_record_block_ranges): Constify.
1331 (read_die_and_children, read_die_and_siblings_1)
1332 (read_die_and_siblings): Make 'info_ptr' and 'new_info_ptr'
1334 (read_full_die_1, read_full_die): Make 'info_ptr' const.
1335 (abbrev_table_read_table): Constify.
1336 (load_partial_dies): Make 'info_ptr' const.
1337 (read_partial_die, read_attribute_value, read_attribute): Make
1338 'info_ptr' and return type const.
1339 (read_address, read_initial_length)
1340 (read_checked_initial_length_and_offset, read_offset)
1341 (read_offset_1, read_n_bytes, read_direct_string): Make 'buf'
1343 (read_direct_string): Make 'buf' and return type const.
1344 (read_indirect_string_at_offset, read_indirect_string_from_dwz)
1345 (read_indirect_string): Make return type const.
1346 (read_unsigned_leb128, read_signed_leb128): Make 'buf' const.
1347 (read_addr_index_from_leb128, dwarf2_read_addr_index_reader): Make
1349 (read_str_index): Make return type const.
1350 (add_include_dir): Make 'include_dir' const.
1351 (add_file_name): Make 'name' const.
1352 (dwarf_decode_line_header): Constify.
1353 (psymtab_include_file_name): Make return type const.
1354 (dwarf_decode_lines_1, dwarf_decode_lines): Constify.
1355 (dwarf2_start_subfile): Make 'filename' const.
1356 (dwarf2_const_value_attr): Make 'bytes' const.
1357 (read_signatured_type_reader): Make 'info_ptr' const.
1358 (decode_locdesc): Constify.
1359 (skip_form_bytes): Make 'bytes', 'buffer_end', and return type
1361 (skip_unknown_opcode): Make 'opcode_definitions', 'mac_ptr',
1362 'mac_end', and return type const.
1363 (dwarf_parse_macro_header): Make 'mac_ptr' and return type const.
1364 (dwarf_decode_macro_bytes): Make 'mac_ptr', 'mac_end', and return
1366 (per_cu_header_read_in): Constify.
1367 * symfile.h (dwarf2_get_section_info): Update.
1369 2013-04-12 Tom Tromey <tromey@redhat.com>
1371 * symtab.h (struct general_symbol_info) <value.bytes>: Make const.
1373 2013-04-12 Eli Zaretskii <eliz@gnu.org>
1375 * NEWS: Mention "show configuration", --configuration.
1376 * top.c (print_gdb_configuration): New function, displays the
1377 details about GDB configure-time parameters.
1378 (print_gdb_version): Mention "show configuration".
1379 * cli/cli-cmds.c (show_configuration): New function.
1380 (_initialize_cli_cmds): Add the "show configuration" command.
1381 * main.c (captured_main) <print_configuration>: New static var.
1382 <long_options>: Use it.
1383 If --configuration was given, call print_gdb_configuration.
1385 2013-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1386 Pedro Alves <palves@redhat.com>
1388 * Makefile.in (HAVE_NATIVE_GCORE_TARGET): New.
1389 (generated_files): Add gcore.
1390 (install-only, uninstall): Add gcore if HAVE_NATIVE_GCORE_TARGET or
1391 HAVE_NATIVE_GCORE_HOST.
1393 * NEWS (Changes since GDB 7.6): Mention newly installed gcore.
1394 * config/alpha/alpha-osf3.mh, config/i386/fbsd.mh,
1395 config/i386/fbsd64.mh, config/i386/i386gnu.mh, config/i386/i386sol2.mh,
1396 config/i386/sol2-64.mh, config/mips/irix5.mh, config/mips/irix6.mh,
1397 config/powerpc/fbsd.mh, config/sparc/fbsd.mh, config/sparc/sol2.mh:
1398 Add HAVE_NATIVE_GCORE_HOST.
1399 * configure: Regenerate.
1400 * configure.ac (HAVE_NATIVE_GCORE_TARGET): New, set it, AC_SUBST it.
1401 New AC_SUBST fir GDB_TRANSFORM_NAME and GCORE_TRANSFORM_NAME. New
1402 AC_CONFIG_FILES for gcore.
1403 * configure.tgt: Add gdb_have_gcore to the initial comment. Set
1405 * gdb_gcore.sh: Rename to ...
1406 * gcore.in: ... here. Remove gcore.sh comment. Use GDB_TRANSFORM_NAME
1407 and GCORE_TRANSFORM_NAME substitutions.
1409 Fix parsing tabs in ${gdb_target_obs}.
1410 * configure.tgt (gdb_have_gcore): Replace case with for and if.
1412 2013-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1414 * remote.c (unpush_and_perror): Add output message final dot.
1416 2013-04-11 Yao Qi <yao@codesourcery.com>
1418 * tracepoint.c (tfile_interp_line): Fit parameters line and
1421 2013-04-10 Joel Brobecker <brobecker@adacore.com>
1423 * solib.c (solib_map_sections): Remove code overwriting
1424 SO->SO_NAME with the bfd's filename.
1426 2013-04-10 Pedro Alves <palves@redhat.com>
1428 * cli/cli-decode.c (integer_unlimited_completer): New function.
1429 (add_setshow_integer_cmd, add_setshow_uinteger_cmd)
1430 (add_setshow_zuinteger_unlimited_cmd): Install the "unlimited"
1432 * cli/cli-setshow.c: Include "cli/cli-utils.h".
1433 (is_unlimited_literal): New function.
1434 (do_set_command): Handle literal "unlimited" arguments.
1435 * frame.c (_initialize_frame) <set backtrace limit>: Document
1437 * printcmd.c (_initialize_printcmd) <set print
1438 max-symbolic-offset>: Add help text.
1439 * record-full.c (_initialize_record_full) <set record full
1440 insn-number-max>: Likewise.
1441 * record.c (_initialize_record) <set record
1442 instruction-history-size, set record function-call-history-size>:
1444 * ser-tcp.c (_initialize_ser_tcp) <set tcp connect-timeout>: Add
1446 * tracepoint.c (_initialize_tracepoint) <set trace-buffer-size>:
1448 * source.c (_initialize_source) <set listsize>: Add help text.
1449 * utils.c (initialize_utils) <set height, set width>: Likewise.
1450 <set pagination>: Mention "set height unlimited".
1451 * valprint.c (_initialize_valprint) <set print elements, set print
1452 repeats>: Document "unlimited".
1454 2013-04-10 Pedro Alves <palves@redhat.com>
1456 * cli/cli-cmds.c (quit_command): Call query_if_trace_running
1457 instead of disconnect_tracing.
1458 * infcmd.c (detach_command, disconnect_command): Call
1459 query_if_trace_running. Adjust.
1460 * top.c: Include "tracepoint.h".
1461 (quit_target): Delete. Contents moved ...
1462 (quit_force): ... here. Wrap each stage of teardown in
1463 TRY_CATCH. Call disconnect_tracing before detaching.
1465 2013-04-10 Hui Zhu <hui@codesourcery.com>
1466 Yao Qi <yao@codesourcery.com>
1468 * configure.ac: Check libbabeltrace is installed.
1469 * config.in: Regenerate.
1470 * configure: Regenerate.
1471 * Makefile.in (LIBBABELTRACE): New.
1472 (CLIBS): Add LIBBABELTRACE.
1473 * ctf.c: Include "exec.h".
1474 (CTF_EVENT_ID_STATUS, CTF_EVENT_ID_TSV_DEF): New macros.
1475 (CTF_EVENT_ID_TP_DEF, ctf_save_write_int32): New macros.
1476 (ctf_save_metadata_header): Define new type aliases in
1478 (ctf_write_header): Define event type "tsv_def" and "tp_def"
1479 in metadata. Start a new faked packet for trace status.
1480 (ctf_write_status): Write trace status to CTF.
1481 (ctf_write_uploaded_tsv): Write TSV to CTF.
1482 (ctf_write_uploaded_tp): Write tracepoint definition to CTF.
1483 (ctf_write_definition_end): End the faked packet.
1485 (ctx, ctf_iter, trace_dirname): New.
1486 (start_pos): New variable.
1487 (ctf_destroy, ctf_open_dir, ctf_open): New.
1488 (SET_INT32_FIELD, SET_ARRAY_FIELD, SET_STRING_FIELD): New
1490 (ctf_read_tsv, ctf_read_tp, ctf_close, ctf_files_info): New.
1491 (ctf_fetch_registers, ctf_xfer_partial): New.
1492 (ctf_get_trace_state_variable_value): New.
1493 (ctf_get_tpnum_from_frame_event): New.
1494 (ctf_get_traceframe_address): New.
1495 (ctf_trace_find, ctf_has_stack): New.
1496 (ctf_has_registers, ctf_traceframe_info, init_ctf_ops): New.
1497 (ctf_get_trace_status, ctf_read_status): New.
1498 (_initialize_ctf): New.
1499 * tracepoint.c (get_tracepoint_number): New
1500 (get_uploaded_tsv): Remove 'static'.
1501 (struct traceframe_info, trace_regblock_size): Move it to ...
1502 * tracepoint.h: ... here.
1503 (get_tracepoint_number): Declare it.
1504 (get_uploaded_tsv): Declare it.
1506 * NEWS: Mention new configure option.
1508 2013-04-10 Pedro Alves <palves@redhat.com>
1509 Hui Zhu <hui@codesourcery.com>
1511 * breakpoint.c (dprintf_re_set): New.
1512 (initialize_breakpoint_ops): Set dprintf_breakpoint_ops re_set
1515 2013-04-09 Joel Brobecker <brobecker@adacore.com>
1517 * configure.tgt (gdb_target_obs) <powerpc-*-aix* | rs6000-*-*>:
1518 Remove solib-svr4.o from the list.
1520 2013-04-09 Joel Brobecker <brobecker@adacore.com>
1522 * varobj.c (update_dynamic_varobj_children) [!HAVE_PYTHON]:
1523 Use gdb_assert_not_reached instead of invalid boolean expression.
1525 2013-04-09 Pedro Alves <palves@redhat.com>
1527 * remote.c (unpush_and_perror): New function.
1528 (readchar, remote_serial_write): Use it.
1530 2013-04-09 Markus Metzger <markus.t.metzger@intel.com>
1532 * NEWS: Mention new btrace RSP packets.
1534 2013-04-08 Tom Tromey <tromey@redhat.com>
1536 * symmisc.c (dump_msymbols): Cast fprintf_filtered argument to
1539 2013-04-08 Tom Tromey <tromey@redhat.com>
1541 * maint.c (print_bfd_section_info): Print the section index.
1542 * symmisc.c (dump_msymbols): Print the section index.
1544 2013-04-08 Tom Tromey <tromey@redhat.com>
1547 * blockframe.c (find_pc_partial_function_gnu_ifunc): Check
1548 SYMBOL_SECTION, not SYMBOL_OBJ_SECTION.
1549 * breakpoint.c (resolve_sal_pc): Update.
1550 * elfread.c (elf_gnu_ifunc_record_cache): Update.
1551 * findvar.c (struct minsym_lookup_data) <objfile>: New field.
1552 (minsym_lookup_iterator_cb): Use it.
1553 (default_read_var_value): Update.
1554 * hppa-hpux-tdep.c (hppa64_hpux_in_solib_call_trampoline):
1556 * infcmd.c (jump_command): Update.
1557 * linespec.c (minsym_found): Update.
1558 * maint.c (maintenance_translate_address): Update.
1559 * minsyms.c (lookup_minimal_symbol_by_pc_section_1): Update.
1560 (prim_record_minimal_symbol_full): Don't set SYMBOL_OBJ_SECTION.
1561 * parse.c (write_exp_msymbol): Update.
1562 * printcmd.c (address_info): Update.
1563 * psymtab.c (find_pc_sect_psymbol): Update.
1564 (fixup_psymbol_section): Check SYMBOL_SECTION, not
1566 (add_psymbol_to_bcache): Correctly initialize SYMBOL_SECTION.
1567 Don't initialize SYMBOL_OBJ_SECTION.
1568 * spu-tdep.c (spu_catch_start): Update.
1569 * stabsread.c (define_symbol): Don't set SYMBOL_SECTION.
1570 * symmisc.c (dump_msymbols, print_symbol): Update.
1571 * symtab.c (fixup_section): Don't set 'obj_section'. Change
1572 how fallback section is computed.
1573 (fixup_symbol_section): Update.
1574 (find_pc_sect_symtab, find_function_start_sal, skip_prologue_sal):
1576 (allocate_symbol, initialize_symbol, allocate_template_symbol):
1577 Initialize SYMBOL_SECTION.
1578 * symtab.h (struct general_symbol_info) <section>: Update comment.
1579 <obj_section>: Remove.
1580 (SYMBOL_OBJ_SECTION): Add 'objfile' argument. Rewrite.
1581 (SYMBOL_OBJFILE): New macro.
1583 2013-04-08 Tom Tromey <tromey@redhat.com>
1585 * coffread.c (record_minimal_symbol): Update.
1586 * dbxread.c (record_minimal_symbol): Update.
1587 * elfread.c (record_minimal_symbol): Update.
1588 * machoread.c (macho_symtab_add_minsym): Update.
1589 * mdebugread.c (record_minimal_symbol, parse_partial_symbols):
1591 * minsyms.c (prim_record_minimal_symbol): Update.
1592 (prim_record_minimal_symbol_full): Remove 'bfd_section'
1594 (prim_record_minimal_symbol_and_info): Likewise.
1595 * minsyms.h (prim_record_minimal_symbol_full)
1596 (prim_record_minimal_symbol_and_info): Update.
1597 * symtab.c (allocate_symbol, initialize_symbol)
1598 (allocate_template_symbol): Initialize SYMBOL_SECTION.
1599 * xcoffread.c (record_minimal_symbol, scan_xcoff_symtab):
1602 2013-04-08 Tom Tromey <tromey@redhat.com>
1605 * solib-som.c (som_solib_section_offsets): Use BFD section
1606 indices. Set offsets for all sections.
1607 * somread.c (som_symtab_read): Compute BFD section for
1608 symbol. Use prim_record_minimal_symbol_and_info.
1609 (som_symfile_read): Fix comment.
1610 (struct find_section_offset_arg): New.
1611 (find_section_offset, set_section_index): New functions.
1612 (som_symfile_offsets): Use set_section_index to compute
1615 2013-04-08 Tom Tromey <tromey@redhat.com>
1617 * coffread.c (cs_to_section): Use gdb_bfd_section_index.
1618 * elfread.c (record_minimal_symbol, elf_symtab_read): Use
1619 gdb_bfd_section_index.
1620 * gdb_bfd.c (gdb_bfd_section_index, gdb_bfd_count_sections):
1622 * gdb_bfd.h (gdb_bfd_section_index, gdb_bfd_count_sections):
1624 * machoread.c (macho_symtab_add_minsym, macho_symfile_offsets):
1626 * objfiles.c (add_to_objfile_sections_full): New function.
1627 (add_to_objfile_sections): Use it.
1628 (build_section_table): Rewrite.
1629 (objfile_relocate1): Use gdb_bfd_section_index. Update.
1630 * objfiles.h (obj_section_offset): Use gdb_bfd_section_index.
1631 (struct objfile) <sections>: Update comment.
1632 (ALL_OBJFILE_OSECTIONS): Skip sections where the_bfd_section
1634 (ALL_OBJSECTIONS): Use it.
1635 * solib-dsbt.c (dsbt_relocate_main_executable): Update.
1636 * solib-frv.c (frv_relocate_main_executable): Update.
1637 * solib-target.c (solib_target_relocate_section_addresses):
1638 Use gdb_bfd_section_index.
1639 * symfile.c (build_section_addr_info_from_section_table):
1640 Use gdb_bfd_section_index.
1641 (build_section_addr_info_from_bfd, place_section): Likewise.
1642 * symtab.c (fixup_section): Update.
1643 * xcoffread.c (find_targ_sec): Use gdb_bfd_section_index.
1645 2013-04-08 Tom Tromey <tromey@redhat.com>
1647 * minsyms.h (struct bound_minimal_symbol): New.
1648 (lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol.
1649 Remove objfile argument.
1650 (lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc):
1651 Return bound_minimal_symbol.
1652 * minsyms.c (lookup_minimal_symbol_by_pc_1)
1653 (lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc):
1654 Return bound_minimal_symbol.
1655 (in_gnu_ifunc_stub): Update.
1656 (lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol.
1657 Remove 'objfile_p' argument.
1658 (lookup_solib_trampoline_symbol_by_pc): Update.
1659 * ada-tasks.c, amd64-windows-tdep.c, arm-tdep.c,
1660 arm-wince-tdep.c, block.c, blockframe.c, breakpoint.c, btrace.c,
1661 c-valprint.c, dwarf2loc.c, elfread.c, frame.c, frv-tdep.c,
1662 glibc-tdep.c, gnu-v2-abi.c, gnu-v3-abi.c, hppa-hpux-tdep.c,
1663 i386-tdep.c, ia64-tdep.c, infcall.c, infcmd.c, jit.c,
1664 linux-fork.c, m32c-tdep.c, m68hc11-tdep.c, maint.c,
1665 mips-tdep.c, p-valprint.c, parse.c, ppc-linux-tdep.c,
1666 ppc-sysv-tdep.c, printcmd.c, rs6000-tdep.c, sh64-tdep.c,
1667 stack.c, symtab.c, tui/tui-disasm.c: Update.
1669 2013-04-08 Tom Tromey <tromey@redhat.com>
1671 * ada-lang.c (ada_decode_symbol): Check and set 'ada_mangled'.
1672 Use symbol's obstack, not an objfile.
1673 * coffread.c (process_coff_symbol): Update.
1674 * dwarf2read.c (fixup_go_packaging, new_symbol_full): Update.
1675 * jv-lang.c (add_class_symbol): Update.
1676 * mdebugread.c (new_symbol): Update.
1677 * minsyms.c (prim_record_minimal_symbol_full)
1678 (terminate_minimal_symbol_table): Update.
1679 * psymtab.c (add_psymbol_to_bcache): Clear entire symbol. Update.
1680 * stabsread.c (define_symbol, read_enum_type): Update.
1681 * symtab.c (symbol_set_demangled_name, symbol_get_demangled_name):
1682 Handle Ada specially.
1683 (symbol_set_language): Add 'obstack' argument.
1684 (symbol_set_names): Update.
1685 (symbol_natural_name, symbol_demangled_name): Always use
1687 * symtab.h (struct general_symbol_info)
1688 <language_specific::obstack>: New field.
1689 <ada_mangled>: New field.
1690 (SYMBOL_SET_LANGUAGE): Add 'obstack' argument.
1691 (symbol_set_language): Update.
1693 2013-04-08 Tom Tromey <tromey@redhat.com>
1695 * symtab.c (symbol_init_cplus_specific, symbol_set_demangled_name):
1696 Take an obstack, not an objfile.
1697 (symbol_set_names): Update.
1698 * symtab.h (symbol_set_demangled_name): Update.
1700 2013-04-08 Tom Tromey <tromey@redhat.com>
1702 * coffread.c (process_coff_symbol, coff_read_enum_type): Call
1704 * dwarf2read.c (fixup_go_packaging): Call allocate_symbol.
1705 (read_func_scope): Call allocate_template_symbol.
1706 (new_symbol_full): Call allocate_symbol.
1707 * jit.c (finalize_symtab): Call allocate_symbol.
1708 * jv-lang.c (add_class_symbol): Call allocate_symbol.
1709 * mdebugread.c (parse_symbol, new_block): Call allocate_symbol.
1710 * stabsread.c (patch_block_stabs, define_symbol, read_enum_type)
1711 (common_block_end): Call allocate_symbol.
1712 * symtab.c (allocate_symbol, initialize_symbol)
1713 (allocate_template_symbol): New functions.
1714 * symtab.c (allocate_symbol, initialize_symbol)
1715 (allocate_template_symbol): Declare.
1716 * xcoffread.c (process_xcoff_symbol): Call initialize_symbol.
1718 2013-04-08 Pedro Alves <palves@redhat.com>
1719 Keith Seitz <keiths@redhat.com>
1721 * breakpoint.c (create_breakpoint): Rename
1722 "parse_condition_and_thread" parameter to "parse_arg". Update
1723 describing comment. If !PARSE_ARG, then error out if ARG is not
1724 the empty string after extracting the location.
1725 * breakpoint.h (create_breakpoint): Rename
1726 "parse_condition_and_thread" parameter to "parse_arg".
1728 2013-04-08 Aleksandar Ristovski <aristovski@qnx.com
1730 * solib-svr4.c (lm_addr_check): Add const qualifier to 'so' arg.
1732 2013-04-07 Yao Qi <yao@codesourcery.com>
1734 * remote.c (remote_trace_find): Change type of parameters 'addr1'
1735 and 'addr2' to CORE_ADDR.
1736 * target.c (update_current_target): Update.
1737 * target.h (struct target_ops) <to_trace_find>: Change parameter
1739 * tracepoint.c (tfind_1): Change type of parameters 'addr1' and
1740 'addr2' to CORE_ADDR.
1741 (tfile_trace_find): Likewise.
1742 (tfile_get_traceframe_address): Change return type to CORE_ADDR.
1743 Change local variable 'addr' to type CORE_ADDR.
1744 * tracepoint.h (tfind_1): Update declaration.
1746 2013-04-06 Eli Zaretskii <eliz@gnu.org>
1748 * windows-nat.c (windows_get_absolute_argv0): Move from here...
1749 * mingw-hdep.c (windows_get_absolute_argv0): ...to here.
1752 * windows-nat.h (windows_get_absolute_argv0): Move prototype from
1754 * main.h (windows_get_absolute_argv0): ...to here.
1756 2013-04-05 Doug Evans <dje@google.com>
1758 * dwarf2read.c (struct dwarf2_per_objfile): Tweak comment.
1759 (read_cutu_die_from_dwo): Add comments.
1760 (read_structure_type): Update comment.
1761 (read_enumeration_type, read_namespace_type): Update comment.
1762 (read_die_type, get_die_type_at_offset, get_die_type): Update comment.
1764 2013-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
1766 Convert man pages to texinfo, new gdbinit.5 texinfo page.
1767 * Makefile.in (gdb.z): Remove.
1768 (install-only): Remove $(man1dir) and gdb.1 installation.
1771 2013-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
1773 Fix compatibility with Linux kernel 3.8.3.
1774 * linux-tdep.c (linux_find_memory_regions_full): Move variable number
1775 to more inner block. Remove parsing of NUMBER from outer block.
1776 Parse NUMBER only if KEYWORD has been identified.
1778 2013-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
1780 Fix variable name shadowing.
1781 * linux-tdep.c (linux_find_memory_regions_full): Rename outer variable
1782 filename to mapsfilename and update its uses.
1784 2013-04-05 Eli Zaretskii <eliz@gnu.org>
1786 * Makefile.in (TAGS): Avoid warning from etags when $GDB_NM_FILE is
1787 empty. See http://sourceware.org/ml/gdb-patches/2012-08/msg00504.html
1788 and http://sourceware.org/ml/gdb-patches/2013-04/msg00055.html for
1789 details of the problem.
1791 2013-04-04 Pedro Alves <palves@redhat.com>
1792 Hui Zhu <hui@codesourcery.com>
1794 * breakpoint.c (validate_commands_for_breakpoint): If validating a
1795 tracepoint, reset its STEP_COUNT and call validate_actionline.
1797 2013-04-03 Doug Evans <dje@google.com>
1799 * dwarf2read.c (read_die_and_siblings_1): Renamed from
1800 read_die_and_siblings.
1801 (read_die_and_siblings): New function.
1802 (read_cutu_die_from_dwo): Dump die if requested.
1803 (read_die_and_children): Call read_full_die_1 and
1804 read_die_and_siblings_1.
1805 (read_full_die): Dump die if requested.
1807 * dwarf2read.c (read_comp_units_from_section): Add debugging printf.
1809 * dwarf2read.c (struct dwo_file): New member comp_dir.
1810 Rename member name to dwo_name. All uses updated.
1811 (hash_dwo_file): Include comp_dir in computation.
1812 (eq_dwo_file): Ditto.
1813 (lookup_dwo_file_slot): New arg comp_dir. All callers updated.
1814 (create_dwo_in_dwp, lookup_dwo_in_dwp, open_and_init_dwo_file): Ditto.
1816 * psymtab.c (read_psymtabs_with_fullname): Don't call
1817 psymtab_to_fullname if the basenames are different.
1819 2013-04-03 Jan Kratochvil <jan.kratochvil@redhat.com>
1821 * NEWS (Changes in GDB 7.6): Update the data-disassemble for "fullname".
1822 New entry about "fullname" presence.
1824 2013-04-03 Pedro Alves <palves@redhat.com>
1826 * NEWS: Mention x86_64/Cygwin as new native configuration.
1828 2013-04-02 Doug Evans <dje@google.com>
1830 * dwarf2read.c (read_structure_type): Fix typo in comment.
1832 2013-04-02 Pedro Alves <palves@redhat.com>
1834 * NEWS: Mention "set/show debug aarch64", "set/show debug
1835 coff-pe-read" and "set/show debug mach-o".
1837 2013-04-02 Pedro Alves <palves@redhat.com>
1839 * NEWS: Mention "set/show remote trace-buffer-size-packet".
1841 2013-04-02 Eli Zaretskii <eliz@gnu.org>
1843 * Makefile.in (HFILES_NO_SRCDIR): Remove call-cmds.h.
1844 gdb_string.h is now in common/.
1846 2013-04-02 Pedro Alves <palves@redhat.com>
1848 * NEWS: Move "set debug notification" and "set trace-buffer-size"
1849 under "New options".
1851 2013-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1855 * remote.c (remote_get_trace_status): Include putpkt in TRY_CATCH.
1857 2013-04-02 Pedro Alves <palves@redhat.com>
1861 * remote.c (send_interrupt_sequence): Use remote_serial_write.
1862 (remote_serial_write): New function.
1863 (putpkt_binary, getpkt_or_notif_sane_1): Use remote_serial_write.
1865 2013-04-01 Jiong Wang <jiwang@tilera.com>
1867 * NEWS: Mention TILE-Gx in "New native configurations" and
1868 "New targets" sections.
1870 2013-04-01 Doug Evans <dje@google.com>
1872 * dwarf2read.c (lookup_signatured_type_at_offset): Delete.
1873 (process_enumeration_scope): Simplify.
1875 * dwarf2read.c (struct dwarf2_per_cu_data): Move member
1877 (struct signatured_type): ... to here.
1878 (sig_type_ptr): New typedef.
1879 (type_unit_group): Delete member 't.first_cu'. Move member 'tus'
1880 out of union 't'. All uses updated.
1881 (dw2_get_file_names_reader): Assert not called for a type unit.
1882 (dw2_get_file_names): Assert not called for a type unit or type
1884 (build_type_psymtabs_reader): Assert called for a type unit.
1885 (build_type_psymtab_dependencies): Assert called for a type unit group.
1887 * dwarf2read.c (free_dwo_file): Add comment.
1888 (dwarf2_per_objfile_free): Unref dwp bfd.
1890 2013-04-01 Aleksandar Ristovski <aristovski@qnx.com>
1892 * coff-pe-read.c (add_pe_exported_sym): Remove unused 'dll_name_len'.
1893 (add_pe_forwarded_sym): Remove unused 'section', 'dll_name_len'.
1894 (read_pe_exported_syms): Remove unused 'exportix'.
1895 (pe_text_section_offset): Remove unused 'opthdr_ofs', 'num_entries',
1896 'export_rva', 'export_size', 'expptr', 'exp_funcbase', 'expdata',
1897 'erva', 'name_rvas', 'ordinals', 'nexp', 'ordbase', 'dll_name'.
1899 2013-04-01 Aleksandar Ristovski <aristovski@qnx.com>
1901 * breakpoint.c (parse_cond_to_aexpr): Remove unused 'old_chain'.
1902 (print_it_watchpoint): Remove unused 'bl'.
1903 (say_where): Remove unused 'uiout'.
1904 (bpstat_remove_breakpoint_callback): Remove unused 'uiout'.
1905 (bkpt_breakpoint_hit): Remove unused 'b'.
1906 (internal_bkpt_print_it): Remove unused 'uiout'.
1907 * buildsym.c (augment_type_symtab): Remove unused 'i'.
1909 2013-03-31 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
1911 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_float): New function.
1912 (ppc64_sysv_abi_push_dummy_call): Handle complex arguments.
1914 2013-03-29 Doug Evans <dje@google.com>
1916 * dwarf2read.c (open_dwo_file): Renamed from open_dwop_file.
1917 Delete arg is_dwp. All callers updated.
1918 (open_dwp_file): New function.
1919 (open_and_init_dwp_file): Call it.
1920 (get_dwp_file): New function.
1921 (lookup_dwo_cutu): Call it.
1923 * dwarf2read.c (open_and_init_dwp_file): Remove incorrect, and
1924 unnecessary, cleanup.
1926 * dwarf2read.c (lookup_dwo_cutu): Improve complaint text.
1928 * dwarf2read.c (read_cutu_die_from_dwo): New function.
1929 (lookup_dwo_unit): New function.
1930 (init_cutu_and_read_dies): Move DWO handling to new functions.
1932 * dwarf2read.c (struct signatured_type): Tweak comment.
1933 (struct dwo_unit): Tweak comment.
1934 (create_debug_types_hash_table): Tweak comment. Reformat long line.
1935 (create_dwo_debug_info_hash_table): Tweak comment.
1936 (dwarf2_per_cu_offset_and_type): Tweak comment.
1938 * dwarf2read.c (lookup_signatured_type): Remove complaint about
1939 missing .debug_types section.
1941 2013-03-29 Yao Qi <yao@codesourcery.com>
1943 * corelow.c: Include "completer.h".
1944 (_initialize_corelow): Call add_target_with_completer with
1945 argument 'filename_completer'.
1946 * tracepoint.c: Likewise.
1947 * exec.c (_initialize_exec): Likewise.
1948 * target.c (add_target): Rename to ...
1949 (add_target_with_completer): ... this. Call set_cmd_completer
1950 if parameter completer is not NULL.
1952 * target.h: Include "command.h".
1953 (add_target_with_completer): Declare it.
1955 2013-03-28 Joel Brobecker <brobecker@adacore.com>
1957 * coffread.c (is_import_fixup_symbol): New function.
1958 (record_minimal_symbol): Use is_import_fixup_symbol to
1959 detect import fixup symbols, and discard them.
1961 2013-03-28 Doug Evans <dje@google.com>
1963 * dwarf2read.c (create_debug_types_hash_table): Don't allocate the
1964 types hash table until we know we need it.
1966 * dwarf2read.c (create_addrmap_from_index): Complain about bad CU
1969 * dwarf2read.c (dw2_get_file_names): Delete arg "objfile".
1970 All callers updated.
1971 (dw2_print_stats): Print #read CUs too.
1972 (dump_die_shallow): Print signatured types better.
1974 * dwarf2read.c (struct dwarf2_per_cu_data): Rename member
1975 info_or_types_section to section. All uses updated.
1976 (struct dwo_unit): Ditto.
1978 2013-03-28 Pedro Alves <palves@redhat.com>
1980 * NEWS (New options): New section.
1981 (New options): Mention set/show remote trace-status-packet.
1982 * remote.c (PACKET_qTStatus): New enumeration value.
1983 (remote_get_trace_status): Skip sending qTStatus if the packet is
1984 disabled. Use packet_ok.
1985 (_initialize_remote): Register a configuration command for
1988 2013-03-28 Doug Evans <dje@google.com>
1990 * symfile.c (find_separate_debug_file): Add comment.
1991 (terminate_after_last_dir_separator): Tweak comment.
1993 * dwarf2read.c (create_partial_symtab): Add forward decl.
1994 (create_partial_symtab): Move to be closer to other psymtab functions.
1995 (process_psymtab_comp_unit_reader, process_psymtab_comp_unit): Ditto.
1997 * dwarf2read.c (dwarf2_physname): Move declaration to better spot.
1998 (compute_symtab_includes): Remove unnecessary forward declaration.
1999 (die_needs_namespace): Add comment marking group of functions for
2000 dwarf2 name computation.
2002 * typeprint.c (_initialize_typeprint): Improve type help text.
2004 * python/python.c (finish_python_initialization): Provide suggestion
2005 for how to tell gdb to find its python files.
2007 2013-03-28 Pedro Alves <palves@redhat.com>
2011 * source.c (_initialize_source): Change back "set listsize" to an
2014 2013-03-27 Gareth McMullin <gareth@blacksphere.co.nz>
2017 * remote.c (remote_get_trace_status): Include putpkt in TRY_CATCH.
2019 2013-03-27 Pedro Alves <palves@redhat.com>
2021 * top.c (history_size): Rename to ...
2022 (history_size_setshow_var): ... this. Add comment.
2023 (show_commands): Use readline's 'history_length' instead of
2024 computing the history length by calling history_get in a loop.
2025 (set_history_size_command): Error out for sizes over INT_MAX.
2026 Restore previous history size on invalid size.
2027 (init_history): If HISTSIZE is negative, leave the history size as
2029 (init_main): Adjust.
2031 2013-03-27 Pedro Alves <palves@redhat.com>
2033 * coff-pe-read.c (_initialize_coff_pe_read): Rename "set debug
2034 coff_pe_read" command to "set debug coff-pe-read".
2036 2013-03-27 Markus Metzger <markus.t.metzger@intel.com>
2038 * record.c (command_size_to_target_size): Fix size comparison.
2039 Change parameter type from pointer to integer to integer.
2042 2013-03-27 Pierre Muller <muller@sourceware.org>
2044 * windows-nat.c (handle_output_debug_string): Avoid typecast
2045 from integer of different size warning.
2047 2013-03-26 Joel Brobecker <brobecker@adacore.com>
2049 * windows-nat.c (handle_output_debug_string): Add empty line
2050 after local block variable definition.
2052 2013-03-26 Pedro Alves <palves@redhat.com>
2054 * ser-tcp.c (wait_for_connect): Make 'polls' parameter unsigned.
2055 (net_open): Make 'polls' local unsigned.
2057 2013-03-26 Pedro Alves <palves@redhat.com>
2059 * remote.c (_initialize_remote): Make "set remoteaddresssize"
2060 a zuinteger command instead of uinteger.
2062 2013-03-26 Pedro Alves <palves@redhat.com>
2064 * record-full.c (record_full_insn_num): Make it unsigned.
2065 (record_full_check_insn_num, record_full_message)
2066 (record_full_registers_change, record_full_xfer_partial): Remove
2067 record_full_insn_max_num check (it's always != 0).
2068 (record_full_info, record_full_restore): Use %u as format string.
2069 (): Use %u as format string.
2070 (set_record_full_insn_max_num): Remove record_full_insn_max_num
2071 check (it's always != 0).
2073 2013-03-26 Pedro Alves <palves@redhat.com>
2075 * dcache.c (_initialize_dcache): Make the "set dcache line-size"
2076 and "set dcache size" commands zuinteger instead of uinteger.
2078 2013-03-26 Pedro Alves <palves@redhat.com>
2080 * cris-tdep.c (_initialize_cris_tdep): Make the "set cris-version"
2081 command zuinteger instead of uinteger.
2083 2013-03-26 Pedro Alves <palves@redhat.com>
2085 * coff-pe-read.c (_initialize_coff_pe_read): Make the command
2086 zuinteger instead of uinteger.
2088 2013-03-26 Pedro Alves <palves@redhat.com>
2090 * record.c (record_insn_history_size_setshow_var)
2091 (record_call_history_size_setshow_var): New globals.
2092 (command_size_to_target_size): New function.
2093 (cmd_record_insn_history, cmd_record_call_history): Use
2094 command_size_to_target_size instead of cast.
2095 (validate_history_size, set_record_insn_history_size)
2096 (set_record_call_history_size): New functions.
2097 (_initialize_record): Install set_record_insn_history_size and
2098 set_record_call_history_size as "set" hooks of "set record
2099 instruction-history-size" and "set record
2100 function-call-history-size".
2102 2013-03-26 Pedro Alves <palves@redhat.com>
2104 * top.c (gdb_rl_operate_and_get_next): Replace max_input_history
2105 use with history_max_entries use. Remove FIXME note.
2107 2013-03-26 Markus Metzger <markus.t.metzger@intel.com>
2109 * record-btrace.c (record_btrace_close): Call
2110 record_btrace_auto_disable.
2112 2013-03-25 Joel Brobecker <brobecker@adacore.com>
2114 * rs6000-nat.c (fixup_breakpoints): Delete declaration.
2116 2013-03-25 Doug Evans <dje@google.com>
2118 * contrib/cc-with-tweaks.sh: Check exit code of dwp.
2120 2013-03-25 Tom Tromey <tromey@redhat.com>
2123 * c-exp.y (exp): Add new productions for destructors after '.' and
2125 (write_destructor_name): New function.
2127 2013-03-25 Tom Tromey <tromey@redhat.com>
2130 * opencl-lang.c (evaluate_subexp_opencl) <STRUCTOP_STRUCT>: Use
2131 value_struct_elt, not lookup_struct_elt_type.
2132 * eval.c (evaluate_subexp_standard) <STRUCTOP_STRUCT,
2133 STRUCTOP_PTR>: Use value_struct_elt, not lookup_struct_elt_type.
2134 * expression.h (EVAL_AVOID_SIDE_EFFECTS): Update comment.
2136 2013-03-25 Yao Qi <yao@codesourcery.com>
2138 * ctf.c [USE_WIN32API]: Undef 'mkdir' and use 'mkdir'
2139 instead of '_mkdir'.
2141 2013-03-23 Eli Zaretskii <eliz@gnu.org>
2143 * windows-nat.c (windows_get_absolute_argv0): New function.
2144 * windows-nat.h: Add its prototype.
2146 * main.c (get_init_files): Use filename_ncmp instead of strncmp.
2147 Use IS_DIR_SEPARATOR instead of looking for a character inside
2148 SLASH_STRING. Include filenames.h.
2149 (captured_main) [__MINGW32__]: Make argv[0] absolute, so that
2150 relocate_gdb_directory works when passed gdb_program_name.
2151 Include windows-nat.h.
2153 2013-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2155 * exceptions.h (enum errors): New entry TARGET_CLOSE_ERROR.
2156 * remote.c (trace_error): Remove the special handling of '2'.
2157 (readchar) <SERIAL_EOF>
2158 (readchar) <SERIAL_ERROR>
2159 (getpkt_or_notif_sane_1): Use TARGET_CLOSE_ERROR for them.
2160 (remote_get_trace_status): Call throw_exception if EX is
2162 * utils.c (perror_with_name): Rename to ...
2163 (throw_perror_with_name): ... here. New parameter errcode, describe it
2164 in the function comment.
2165 (perror_with_name): New function wrapper.
2166 * utils.h (enum errors): New stub declaration.
2167 (throw_perror_with_name): New declaration.
2169 2013-03-22 Pedro Alves <palves@redhat.com>
2170 Yao Qi <yao@codesourcery.com>
2171 Mark Kettenis <kettenis@gnu.org>
2173 * cli/cli-setshow.c (do_set_command) <var_uinteger>:
2174 Don't let the user set the value to UINT_MAX directly.
2175 <var_integer>: Don't let the user set the value to INT_MAX
2178 2013-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2180 * remote.c (remote_unpush_target): New function.
2181 (remote_open_1): Remove two pop_target calls, update one comment, add
2182 comment to target_preopen call. Replace pop_target call by
2183 remote_unpush_target call.
2184 (interrupt_query, readchar, getpkt_or_notif_sane_1): Replace
2185 pop_target calls by remote_unpush_target calls.
2187 2013-03-22 Pedro Alves <palves@redhat.com>
2189 * linux-nat.c (linux_child_follow_fork): Don't call
2190 linux_enable_event_reporting.
2191 (linux_handle_extended_wait): Don't call
2192 linux_enable_event_reporting.
2194 2013-03-22 Pedro Alves <palves@redhat.com>
2196 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Define INSN macro,
2197 use it to rewrite the trampoline buffers with type gdb_byte[], and
2198 undefine the macro. Remove char* cast.
2200 2013-03-21 Doug Evans <dje@google.com>
2202 New commands "mt set per-command {space,time,symtab} {on,off}".
2204 * event-top.c: #include "maint.h".
2205 * main.c: #include "maint.h".
2206 * maint.c: #include <sys/time.h>, <time.h>, block.h, top.h,
2207 timeval-utils.h, maint.h, cli/cli-setshow.h.
2208 (per_command_time, per_command_space): New static globals.
2209 (per_command_symtab): New static global.
2210 (per_command_setlist, per_command_showlist): New static globals.
2211 (struct cmd_stats): Move here from utils.c.
2212 (set_per_command_time): Renamed from set_display_time in utils.c
2213 and moved here. All callers updated.
2214 (set_per_command_space): Renamed from set_display_space in utils.c
2215 and moved here. All callers updated.
2216 (count_symtabs_and_blocks): New function.
2217 (report_command_stats): Moved here from utils.c. Add support for
2218 printing symtab stats. Only print data if enabled before command
2220 (make_command_stats_cleanup): Ditto.
2221 (sert_per_command_cmd, show_per_command_cmd): New functions.
2222 (_initialize_maint_cmds): Add new commands
2223 mt set per-command {space,time,symtab} {on,off}.
2224 * maint.h: New file.
2225 * top.c: #include "maint.h".
2226 * utils.c (reset_prompt_for_continue_wait_time): New function.
2227 (get_prompt_for_continue_wait_time): New function.
2228 * utils.h (reset_prompt_for_continue_wait_time): Declare
2229 (get_prompt_for_continue_wait_time): Declare.
2230 (make_command_stats_cleanup): Moved to maint.h.
2231 (set_display_time, set_display_space): Moved to maint.h and renamed
2232 to set_per_command_time, set_per_command_space.
2233 * cli/cli-setshow.c (parse_cli_boolean_value): Renamed from
2234 parse_binary_operation and made non-static. Don't call error,
2235 just return an error marker. All callers updated.
2236 * cli/cli-setshow.h (parse_cli_boolean_value): Declare.
2238 2013-03-21 Tom Tromey <tromey@redhat.com>
2240 * symfile.c (alloc_section_addr_info): Update header. Don't set
2241 'num_sections' field.
2242 (build_section_addr_info_from_section_table): Set 'num_sections'.
2243 (build_section_addr_info_from_bfd): Likewise.
2244 (build_section_addr_info_from_objfile): Remove dead loop
2246 (free_section_addr_info): Unconditionally call xfree.
2247 (relative_addr_info_to_section_offsets, addrs_section_sort)
2248 (addr_info_make_relative, syms_from_objfile_1): Remove dead loop
2250 (syms_from_objfile_1): Remove dead 'if' condition. Check
2252 (add_symbol_file_command): Set 'num_sections'.
2253 * symfile-mem.c (symbol_file_add_from_memory): Set
2255 * somread.c (som_symfile_offsets): Remove dead loop condition.
2256 * machoread.c (macho_symfile_offsets): Remove dead 'if'.
2257 * jit.c (jit_bfd_try_read_symtab): Set 'num_sections'.
2259 2013-03-21 Tom Tromey <tromey@redhat.com>
2261 * tracepoint.h (decode_agent_options): Add 'trace_string'
2263 * tracepoint.c (decode_agent_options): Add 'trace_string'
2265 (validate_actionline): Update.
2266 (collect_symbol): Add 'trace_string' argument.
2267 (struct add_local_symbols_data) <trace_string>: New field.
2268 (do_collect_symbol): Update.
2269 (add_local_symbols): Add 'trace_string' argument.
2270 (encode_actions_1): Update.
2271 (trace_dump_actions): Update.
2272 * dwarf2loc.c (access_memory): Update.
2273 * ax.h (struct agent_expr) <tracing, trace_string>: New fields.
2274 * ax-general.c (new_agent_expr): Update.
2275 * ax-gdb.h (gen_trace_for_expr, gen_trace_for_var)
2276 (gen_trace_for_return_address): Add argument.
2277 (trace_kludge, trace_string_kludge): Remove.
2278 * ax-gdb.c (trace_kludge, trace_string_kludge): Remove.
2279 (gen_traced_pop, gen_fetch, gen_bitfield_ref, gen_expr): Update.
2280 (gen_trace_for_var): Add 'trace_string' argument.
2281 (gen_trace_for_expr, gen_trace_for_return_address): Likewise.
2282 (gen_printf, agent_eval_command_one): Update.
2284 2013-03-21 Tom Tromey <tromey@redhat.com>
2287 * c-exp.y (yylex): Rewrite to push all tokens onto the FIFO.
2288 Handle FILENAME token.
2290 2013-03-21 Tom Tromey <tromey@redhat.com>
2292 * c-exp.y (YYPRINT): Define.
2293 (c_print_token): New function.
2295 2013-03-21 Tom Tromey <tromey@redhat.com>
2297 * c-exp.y (%union) <sym, ivar, ivec>: Remove.
2299 2013-03-21 Yao Qi <yao@codesourcery.com>
2301 * ctf.c: Include "gdb_stat.h".
2302 [USE_WIN32API]: New macro 'mkdir'.
2303 (ctf_start): Use permission bits macros if they are defined.
2305 2013-03-20 Keith Seitz <keiths@redhat.com>
2307 * breakpoint.h (struct breakpoint): Add comment to
2308 extra_string indicating that this member is mallod'd.
2309 * breakpoint.c (base_breakpoint_dtor): Free extra_string.
2311 2013-03-20 Pedro Alves <palves@redhat.com>
2315 * cli/cli-setshow.c (do_set_command)
2316 <var_uinteger, var_zuinteger>: Use LONGEST for variable holding
2317 the result of parsing the command argument. Throw error if the
2318 value is greater than UINT_MAX. Print the invalid value with
2320 <var_integer, var_zinteger>: Use LONGEST for variable holding the
2321 result of parsing the command argument. Throw error if the value
2322 is greater than INT_MAX, not greater or equal. Also throw error
2323 if the value is less than INT_MIN. Print the invalid value with
2325 <var_zuinteger_unlimited>: Throw error if the value is greater
2326 than INT_MAX, not greater or equal.
2327 (do_show_command) <var_integer, var_zinteger,
2328 var_zuinteger_unlimited>: Use %d for printing int, not %u.
2330 2013-03-20 Tom Tromey <tromey@redhat.com>
2332 * ax-gdb.c (gen_var_ref): Unconditionally call via computed ops,
2334 * dwarf2read.c (read_func_scope): Remove old FIXME.
2335 * eval.c (evaluate_subexp_standard): Check SYMBOL_COMPUTED_OPS,
2337 * findvar.c (symbol_read_needs_frame, default_read_var_value):
2338 Unconditionally call via computed ops, if possible.
2339 * printcmd.c (address_info): Unconditionally call via computed ops,
2341 * stack.c (read_frame_arg): Unconditionally call via computed ops,
2343 * symtab.c (register_symbol_computed_impl): Sanity check 'ops'.
2344 * tracepoint.c (scope_info): Unconditionally call via computed ops,
2347 2013-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
2348 Tom Tromey <tromey@redhat.com>
2351 * coffread.c (coff_register_index): New global.
2352 (process_coff_symbol, coff_read_enum_type): Set
2353 SYMBOL_ACLASS_INDEX.
2354 (_initialize_coffread): Initialize new global.
2355 * dwarf2loc.c (locexpr_find_frame_base_location)
2356 (dwarf2_block_frame_base_locexpr_funcs)
2357 (loclist_find_frame_base_location)
2358 (dwarf2_block_frame_base_loclist_funcs): New.
2359 (dwarf_expr_frame_base_1): Call SYMBOL_BLOCK_OPS, remove internal_error.
2360 (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Add location_has_loclist.
2361 * dwarf2loc.h (dwarf2_block_frame_base_locexpr_funcs)
2362 (dwarf2_block_frame_base_loclist_funcs): New.
2363 * dwarf2read.c (dwarf2_locexpr_index, dwarf2_loclist_index)
2364 (dwarf2_locexpr_block_index, dwarf2_loclist_block_index): New
2366 (read_func_scope): Update.
2367 (fixup_go_packaging, mark_common_block_symbol_computed)
2368 (var_decode_location, new_symbol_full, dwarf2_const_value):
2369 Set SYMBOL_ACLASS_INDEX.
2370 (dwarf2_symbol_mark_computed): Likewise. Add 'is_block' argument.
2371 (_initialize_dwarf2_read): Initialize new globals.
2372 * jit.c (finalize_symtab): Set SYMBOL_ACLASS_INDEX.
2373 * jv-lang.c (add_class_symbol): Set SYMBOL_ACLASS_INDEX.
2374 * mdebugread.c (mdebug_register_index, mdebug_regparm_index): New
2376 (parse_symbol, psymtab_to_symtab_1): Set SYMBOL_ACLASS_INDEX.
2377 (_initialize_mdebugread): Initialize new globals.
2378 * psympriv.h (struct partial_symbol) <aclass>: Update comment.
2379 * stabsread.c (patch_block_stabs): Set SYMBOL_ACLASS_INDEX.
2380 (stab_register_index, stab_regparm_index): New globals.
2381 (define_symbol, read_enum_type, common_block_end): Set
2382 SYMBOL_ACLASS_INDEX.
2383 (_initialize_stabsread): Initialize new globals.
2384 * symtab.c (next_aclass_value, symbol_impl, symbol_impls): New
2386 (MAX_SYMBOL_IMPLS): New define.
2387 (register_symbol_computed_impl, register_symbol_block_impl)
2388 (register_symbol_register_impl)
2389 (initialize_ordinary_address_classes): New functions.
2390 (_initialize_symtab): Call initialize_ordinary_address_classes.
2391 * symtab.h (enum address_class) <LOC_FINAL_VALUE>: New constant.
2392 (struct symbol_impl): New.
2393 (SYMBOL_ACLASS_BITS): New define.
2394 (struct symbol) <aclass, ops>: Remove fields.
2395 <aclass_index>: New field.
2396 (symbol_impls): Declare.
2397 (SYMBOL_CLASS, SYMBOL_COMPUTED_OPS, SYMBOL_REGISTER_OPS): Redefine.
2398 (SYMBOL_IMPL, SYMBOL_ACLASS_INDEX): New defines.
2399 (register_symbol_computed_impl, register_symbol_block_impl)
2400 (register_symbol_register_impl): Declare.
2401 (struct symbol_computed_ops): Add location_has_loclist.
2402 (struct symbol_block_ops): New.
2403 (SYMBOL_BLOCK_OPS): New.
2404 * xcoffread.c (process_xcoff_symbol): Set SYMBOL_ACLASS_INDEX.
2406 2013-03-20 Tom Tromey <tromey@redhat.com>
2408 * psymtab.c (find_pc_sect_psymbol, fixup_psymbol_section)
2409 (print_partial_symbols, recursively_search_psymtabs): Use
2412 2013-03-20 Pierre Muller <muller@sourceware.org>
2414 * contrib/ari/gdb_ari.sh (OP eol rule): Also check
2415 addtion, subtraction, multiplication and division binary operator.
2417 2013-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
2420 * bfd-target.c (target_bfd_xclose): Remove parameter quitting.
2421 * bsd-kvm.c (bsd_kvm_close): Likewise.
2422 * bsd-uthread.c (bsd_uthread_close): Likewise.
2423 * corelow.c (core_close): Likewise.
2424 (core_close_cleanup): Remove parameter quitting from a caller.
2425 * event-top.c (async_disconnect): Likewise.
2426 * exec.c (exec_close_1): Remove parameter quitting.
2427 * go32-nat.c (go32_close): Likewise.
2428 * linux-nat.c (linux_nat_close): Remove parameter quitting. Remove
2429 parameter quitting from a caller.
2430 * mips-linux-nat.c (super_close): Remove parameter quitting from the
2432 (mips_linux_close): Remove parameter quitting. Remove parameter
2433 quitting from a caller.
2434 * monitor.c (monitor_close): Remove parameter quitting.
2435 * monitor.h (monitor_close): Likewise.
2436 * record-btrace.c (record_btrace_close): Likewise.
2437 * record-full.c (record_full_close): Likewise.
2438 * remote-m32r-sdi.c (m32r_close): Remove parameter quitting and remove
2439 it also from fprintf_unfiltered.
2440 * remote-mips.c (mips_close): Remove parameter quitting.
2441 (mips_detach): Remove parameter quitting from a caller.
2442 * remote-sim.c (gdbsim_close): Remove parameter quitting.
2443 (gdbsim_close): Remove duplicate function comment. Remove parameter
2444 quitting and remove it also from printf_filtered.
2445 * remote.c (remote_close): Remove parameter quitting.
2446 * solib-svr4.c (enable_break): Remove parameter quitting from a caller.
2447 * target.c (update_current_target): Remove parameter int from to_close
2449 (push_target, unpush_target, pop_target): Remove parameter quitting from
2451 (pop_all_targets_above, pop_all_targets): Remove parameter quitting.
2452 Remove parameter quitting from a caller.
2453 (target_preopen): Remove parameter quitting from a caller.
2454 (target_close): Remove parameter quitting. Remove parameter quitting
2455 from a caller two times. Remove parameter quitting also from
2457 * target.h (struct target_ops): Remove parameter quitting and as int
2458 from fields to_xclose and to_close.
2459 (extern struct target_ops current_target):
2460 (target_close, pop_all_targets): Remove parameter quitting. Update the
2462 (pop_all_targets_above): Remove parameter quitting.
2463 * top.c (quit_target): Remove parameter quitting from a caller.
2464 * tracepoint.c (tfile_close): Remove parameter quitting.
2465 * windows-nat.c (windows_close): Remove parameter quitting.
2467 2013-03-20 Corinna Vinschen <vinschen@redhat.com>
2469 * windows-nat.c (handle_output_debug_string): Replace call
2470 to string_to_core_addr with call to strtoull.
2472 2013-03-20 Yao Qi <yao@codesourcery.com>
2474 * ctf.c (ctf_save_metadata_header): Define macro HOST_ENDIANNESS
2475 and write it to CTF metadata.
2477 2013-03-19 Corinna Vinschen <vinschen@redhat.com>
2479 * windows-nat.c (handle_output_debug_string): Change type of n to
2480 SIZE_T to avoid crash on 64 bit systems.
2482 2013-03-17 Eli Zaretskii <eliz@gnu.org>
2484 * python/python-internal.h (HAVE_SNPRINTF)
2485 [_WIN32 && HAVE_DECL_SNPRINTF]: Define, to avoid compiler warnings
2486 about redefinition of snprintf by pyerrors.h.
2488 2013-03-15 Steve Ellcey <sellcey@mips.com>
2490 * remote-sim.c (sim_command_completer): Make char arguments const.
2492 2013-03-15 Tom Tromey <tromey@redhat.com>
2495 * gdbtypes.c (types_equal): Handle TYPE_CODE_FUNC.
2497 2013-03-14 Tom Tromey <tromey@redhat.com>
2499 * gdb_bfd.c (struct gdb_bfd_data) <crc_computed, crc>:
2501 (get_file_crc): Move from symfile.c.
2502 (gdb_bfd_crc): New function.
2503 * gdb_bfd.h (gdb_bfd_crc): Declare.
2504 * objfiles.h (struct objfile) <crc32, crc32_p>: Remove.
2505 * symfile.c (get_file_crc): Move to gdb_bfd.c.
2506 (separate_debug_file_exists): Use gdb_bfd_crc.
2508 2013-03-14 Tom Tromey <tromey@redhat.com>
2510 * symfile.c (get_debug_link_info): Remove.
2511 (find_separate_debug_file_by_debuglink): Use
2512 bfd_get_debug_link_info.
2514 2013-03-14 Tom Tromey <tromey@redhat.com>
2516 * symtab.c (error_in_psymtab_expansion): New function.
2517 (lookup_symbol_aux_quick)
2518 (basic_lookup_transparent_type_quick): Remove "last resort"
2519 code. Use error_in_psymtab_expansion.
2521 2013-03-14 Doug Evans <dje@google.com>
2522 Jan Kratochvil <jan.kratochvil@redhat.com>
2524 * dwarf2read.c (dw2_map_symtabs_matching_filename): Put continue after
2525 any successful compare_filenames_for_search or FILENAME_CMP.
2526 * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
2527 * symtab.c (iterate_over_some_symtabs): Likewise.
2529 2013-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
2531 * source.c (print_source_lines_base): Make a local copy of
2534 2013-03-14 Hui Zhu <hui_zhu@mentor.com>
2535 Jan Kratochvil <jan.kratochvil@redhat.com>
2537 * source.c (print_source_lines_base): Suppress "file" for TUI.
2539 2013-03-14 Keith Seitz <keiths@redhat.com>
2540 Alan Matsuoka <alanm@redhat.com>
2544 * cp-namespace.c (cp_lookup_nested_symbol): Handle TYPE_CODE_FUNC and
2546 * elfread.c (elf_symtab_read): Handle BSF_GNU_UNIQUE for certain
2549 2013-03-14 Yao Qi <yao@codesourcery.com>
2551 * tracepoint.c (tfile_write_status): Write 'stop_desc' of trace
2552 status to tfile if trace is stopped by command 'tstop'.
2554 2013-03-14 Yao Qi <yao@codesourcery.com>
2556 * tracepoint.c (tfile_write_status): Write trace notes and user
2557 name into tfile if they are not NULL.
2559 2013-03-14 Hui Zhu <hui@codesourcery.com>
2560 Yao Qi <yao@codesourcery.com>
2562 * Makefile.in (REMOTE_OBS): Add ctf.o.
2563 (SFILES): Add ctf.c.
2564 (HFILES_NO_SRCDIR): Add ctf.h.
2565 * ctf.c, ctf.h: New files.
2566 * tracepoint.c: Include 'ctf.h'.
2567 (collect_pseudocommand): Remove static.
2568 (trace_save_command): Parse option "-ctf".
2569 Produce different trace file writers per option.
2570 Adjust output message.
2571 (trace_save_tfile, trace_save_ctf): New.
2572 * tracepoint.h (trace_save_tfile, trace_save_ctf): Declare.
2573 * mi/mi-main.c: Include 'ctf.h'.
2574 (mi_cmd_trace_save): Handle option '-ctf'. Call either
2575 trace_save_tfile or trace_save_ctf.
2576 * NEWS: Mention these changes.
2578 2013-03-14 Yao Qi <yao@codesourcery.com>
2580 * tracepoint.c (trace_file_writer_xfree): New.
2581 (struct tfile_writer_data): New.
2582 (tfile_dtor, tfile_can_target_save, tfile_start): New.
2583 (tfile_write_header, tfile_write_regblock_type): New.
2584 (tfile_write_status, tfile_write_uploaded_tsv): New.
2585 (tfile_write_uploaded_tp, tfile_write_definition_end): New.
2586 (tfile_write_raw_data, (tfile_end): New.
2587 (tfile_write_ops): New global variable.
2588 (TRACE_WRITE_R_BLOCK): New macro.
2589 (TRACE_WRITE_M_BLOCK_HEADER): New macro.
2590 (TRACE_WRITE_M_BLOCK_MEMORY): New macro.
2591 (TRACE_WRITE_V_BLOCK): New macro.
2592 (trace_save): Add extra one parameter WRITER. Make it static.
2593 Use WRITER to writer trace.
2594 (tfile_trace_file_writer_new): New.
2595 (trace_save_command): Caller update.
2596 (trace_save_tfile): Write trace data in TFILE format.
2597 * tracepoint.h (struct trace_frame_write_ops): New.
2598 (struct trace_file_write_ops): New.
2599 (struct trace_file_writer): New.
2600 (trace_save): Remove its declaration.
2601 (trace_save_tfile): Declare it.
2602 * mi/mi-main.c (mi_cmd_trace_save): Call trace_save_tfile
2603 instead of trace_save.
2605 2013-03-13 Pedro Alves <palves@redhat.com>
2607 * hppa-hpux-nat.c (hppa_hpux_save_state_offset): Make static.
2609 2013-03-13 Pedro Alves <palves@redhat.com>
2611 * dbxread.c (read_ofile_symtab, process_one_symbol): Remove
2613 * demangle.c (current_demangling_style_string): Make it const.
2614 (set_demangling_command): Assert the demangling style is known.
2615 Remove all handling of unknown styles. Set
2616 'current_demangling_style_string' to an element of the
2617 demangling_style_names array.
2618 (set_demangling_style): Delete.
2619 (_initialize_demangler): Set current_demangling_style_string to the
2620 element of the demangling_style_names array that corresponds to
2621 the default demangling style. Remove FIXME note. Don't call
2622 set_demangling_style.
2623 * gdb-demangle.h (set_demangling_style): Remove declaration.
2625 2013-03-13 Pedro Alves <palves@redhat.com>
2627 * ada-lang.c (struct add_partial_datum) <text, text0, word>: Make
2629 (ada_make_symbol_completion_list): Make "text0" parameter const.
2630 * ax-gdb.c (agent_eval_command_one): Make "exp" parameter const.
2631 * breakpoint.c (condition_completer): Make "text" and "word"
2632 parameters const. Adjust.
2633 (check_tracepoint_command): Adjust to validate_actionline
2635 (catch_syscall_completer): Make "text" and "word" parameters
2637 * cli/cli-cmds.c (show_user): Make "comname" local const.
2638 (valid_command_p): Make "command" parameter const.
2639 (alias_command): Make "alias_prefix" and "command_prefix" locals
2641 * cli/cli-decode.c (add_cmd): Make "name" parameter const.
2642 (add_alias_cmd): Make "name" and "oldname" parameters const.
2643 Adjust. No longer make copy of OLDNAME.
2644 (add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd)
2645 (add_setshow_cmd_full, add_setshow_enum_cmd)
2646 (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
2647 (add_setshow_filename_cmd, add_setshow_string_cmd)
2648 (add_setshow_string_noescape_cmd)
2649 (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
2650 (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
2651 (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd)
2652 (delete_cmd, add_info, add_info_alias, add_com, add_com_alias):
2653 Make "name" parameter const.
2654 (help_cmd): Rename "command" parameter to "arg". New const local
2656 (find_cmd): Make "command" parameter const.
2657 (lookup_cmd_1): Make "text" parameter pointer to const. Adjust to
2658 deprecated_cmd_warning prototype change.
2659 (undef_cmd_error): Make "cmdtype" parameter const.
2660 (lookup_cmd): Make "line" parameter const.
2661 (deprecated_cmd_warning): Change type of "text" parameter to
2662 pointer to const char, from pointer to pointer to char. Adjust.
2663 (lookup_cmd_composition): Make "text" parameter const.
2664 (complete_on_cmdlist, complete_on_enum): Make "text" and "word"
2666 * cli/cli-decode.h (struct cmd_list_element) <name>: Make field
2668 * cli/cli-script.c (validate_comname): Make "tem" local const.
2669 (define_command): New const local "tem_c". Use it in calls to
2671 (document_command): Make "tem" and "comfull" locals const.
2672 (show_user_1): Make "prefix" and "name" parameters const.
2673 * cli-script.h (show_user_1): Make "prefix" and "name" parameters
2675 * command.h (add_cmd, add_alias_cmd, add_prefix_cmd)
2676 (add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1)
2677 (deprecated_cmd_warning, lookup_cmd_composition, add_com)
2678 (add_com_alias, add_info, add_info_alias, complete_on_cmdlist)
2679 (complete_on_enum, add_setshow_enum_cmd)
2680 (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
2681 (add_setshow_filename_cmd, add_setshow_string_cmd)
2682 (add_setshow_string_noescape_cmd)
2683 (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
2684 (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
2685 (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
2686 Change prototypes, constifying strings.
2687 * completer.c (noop_completer, filename_completer): Make "text"
2688 and "prefix" parameters const.
2689 (location_completer, expression_completer)
2690 (complete_line_internal): Make "text" and "prefix" parameters
2692 (command_completer, signal_completer): Make "text" and "prefix"
2694 * completer.h (noop_completer, filename_completer)
2695 (expression_completer, location_completer, command_completer)
2696 (signal_completer): Change prototypes.
2697 * corefile.c (complete_set_gnutarget): Make "text" and "word"
2699 * cp-abi.c (cp_abi_completer): Likewise.
2700 * expression.h (parse_expression_for_completion): Change
2702 * f-lang.c (f_make_symbol_completion_list): Make "text" and "word"
2704 * infcmd.c (_initialize_infcmd): Make "cmd_name" local const.
2705 * infrun.c (handle_completer): Make "text" and "word" parameters
2707 * interps.c (interpreter_completer): Make "text" and "word"
2709 * language.h (struct language_defn)
2710 <la_make_symbol_completion_list>: Make "text" and "word"
2712 * parse.c (parse_exp_1): Move const hack to parse_exp_in_context.
2713 (parse_exp_in_context): Rename to ...
2714 (parse_exp_in_context_1): ... this.
2715 (parse_exp_in_context): Reimplement, with const hack from
2717 (parse_expression_for_completion): Make "string" parameter const.
2718 * printcmd.c (decode_format): Make "string_ptr" parameter pointer
2719 to pointer to const char. Adjust.
2720 (print_command_1): Make "exp" parameter const.
2721 (output_command): Rename to ...
2722 (output_command_const): ... this. Make "exp" parameter const.
2723 (output_command): Reimplement.
2724 (x_command): Adjust.
2725 (display_command): Rename "exp" parameter to "arg". New "exp"
2726 local, const version of "arg".
2727 * python/py-auto-load.c (gdbpy_initialize_auto_load): Make
2728 "cmd_name" local const.
2729 * python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree
2731 (cmdpy_completer): Make "text" and "word" parameters const.
2732 (gdbpy_parse_command_name): Make "prefix_text2" local const.
2733 * python/py-param.c (add_setshow_generic): Make "tmp_name" local
2735 * remote.c (_initialize_remote): Make "cmd_name" local const.
2736 * symtab.c (language_search_unquoted_string): Make "text" and "p"
2737 parameters const. Adjust.
2738 (completion_list_add_fields): Make "sym_text", "text" and "word"
2740 (struct add_name_data) <sym_text, text, word>: Make fields const.
2741 (default_make_symbol_completion_list_break_on): Make "text" and
2742 "word" parameters const. Adjust locals.
2743 (default_make_symbol_completion_list)
2744 (make_symbol_completion_list, make_symbol_completion_type)
2745 (make_symbol_completion_list_fn): Make "text" and "word"
2747 (make_file_symbol_completion_list): Make "text", "word" and
2748 "srcfile" parameters const. Adjust locals.
2749 (add_filename_to_list): Make "text" and "word" parameters const.
2750 (struct add_partial_filename_data) <text, word>: Make fields
2752 (make_source_files_completion_list): Make "text" and "word"
2754 * symtab.h (default_make_symbol_completion_list_break_on)
2755 (default_make_symbol_completion_list, make_symbol_completion_list)
2756 (make_symbol_completion_type enum type_code)
2757 (make_symbol_completion_list_fn make_file_symbol_completion_list)
2758 (make_source_files_completion_list): Change prototype.
2759 * top.c (execute_command): Adjust to pass pointer to pointer to
2760 const char to lookup_cmd, and to deprecated_cmd_warning prototype
2762 (set_verbose): Make "cmdname" local const.
2763 * tracepoint.c (decode_agent_options): Make "exp" parameter const,
2765 (validate_actionline): Make "line" parameter a pointer to const
2767 (encode_actions_1): Make "action_exp" local const, and adjust.
2768 (encode_actions): Adjust.
2769 (replace_comma): Delete.
2770 (trace_dump_actions): Make "action_exp" and "next_comma" locals
2771 const, and adjust. Don't frob the action string while splitting
2772 it at commas. Instead, make a copy of each split substring in
2774 (trace_dump_command): Adjust to validate_actionline prototype
2776 * tracepoint.h (decode_agent_options, decode_agent_options)
2777 (encode_actions, validate_actionline): Change prototypes.
2778 * valprint.h (output_command): Delete declaration.
2779 (output_command_const): Declare.
2780 * value.c (function_destroyer): Cast const away in xfree call.
2782 2013-03-13 Pedro Alves <palves@redhat.com>
2784 * ada-lang.c (ada_decode_symbol): Cast away constness of GSYMBOL
2785 rather than casting 'const char * const *' to 'const char **'.
2786 * ada-lex.l (processInt): Make "trailer" local const. Remove
2787 'const char **' cast.
2788 * arm-linux-tdep.c (arm_stap_parse_special_token): Add 'char *'
2789 locals, and use those as strtol output pointer, instead than doing
2790 invalid casts to from 'const char **' to 'char **'.
2791 (_initialize_demangle): Remove cast.
2792 * i386-tdep.c (i386_stap_parse_special_token): : Add 'char *'
2793 locals, and use those as strtol output pointer, instead than doing
2794 invalid casts to from 'const char **' to 'char **'.
2795 * solib-dsbt.c (dsbt_get_initial_loadmaps): Remove 'gdb_byte**'
2797 * stap-probe.c (stap_parse_register_operand)
2798 (stap_parse_single_operand): Likewise.
2800 2013-03-13 Yao Qi <yao@codesourcery.com>
2802 * tracepoint.c (tfile_get_trace_state_variable_value): Look for
2803 the last matched 'V' blcok in trace frame.
2805 2013-03-12 Joel Brobecker <brobecker@adacore.com>
2807 * NEWS: Create a new section for the next release branch.
2808 Rename the section of the current branch, now that it has
2811 2013-03-12 Joel Brobecker <brobecker@adacore.com>
2813 GDB 7.6 branch created (branch timestamp: 2013-03-12 22:15 UTC)
2814 * version.in: Bump version to 7.6.50.20130312-cvs.
2816 2013-03-12 Keith Seitz <keiths@redhat.com>
2818 * mi/mi-cmds.h (mi_execute_command): Make "cmd" const.
2819 * mi/mi-interp.c (mi_interpreter_exec): Make "command" const.
2820 Remove temporary copy of input string.
2821 (mi_execute_command_wrapper): Make "cmd" const.
2822 * mi/mi-main.c (mi_execute_command): Make "string_ptr" const.
2823 * mi/mi-parse.c (mi_parse_argv): Make "args" const.
2825 (mi_parse): Make "cmd" const.
2827 * mi/mi-parse.h (mi_parse): Make "cmd" const.
2829 2013-03-12 Keith Seitz <keiths@redhat.com>
2831 * ada-lang.c (ada_read_renaming_var_value): Pass const
2832 pointer to expression string to parse_exp_1.
2833 (create_excep_cond_exprs): Likewise.
2834 * ax-gdb.c (agent_eval_command_one): Likewise.
2835 (maint_agent_printf_command): Likewise.
2836 Constify much of the string handling/parsing.
2837 * breakpoint.c (set_breakpoint_condition): Pass const
2838 pointer to expression string to parse_exp_1.
2839 (update_watchpoint): Likewise.
2840 (parse_cmd_to_aexpr): Constify string handling.
2841 Pass const pointer to parse_exp_1.
2842 (init_breakpoint_sal): Pass const pointer to parse_exp_1.
2843 (find_condition_and_thread): Likewise.
2845 (watch_command_1): Make "arg" const.
2846 Constify string handling.
2847 Copy the expression string instead of changing the input
2849 (update_breakpoint_location): Pass const pointer to
2851 * eval.c (parse_and_eval_address): Make "exp" const.
2852 (parse_to_comma_and_eval): Make "expp" const.
2853 (parse_and_eval): Make "exp" const.
2854 * expression.h (parse_expression): Make argument const.
2855 (parse_exp_1): Make first argument const.
2856 * findcmd.c (parse_find_args): Treat "args" as const.
2857 * linespec.c (parse_linespec): Pass const pointer to
2858 linespec_expression_to_pc.
2859 (linespec_expression_to_pc): Make "exp_ptr" const.
2860 * parse.c (parse_exp_1): Make "stringptr" const.
2861 Make a copy of the expression to pass to parse_exp_in_context until
2862 this whole interface can be constified.
2863 (parse_expression): Make "string" const.
2864 * printcmd.c (ui_printf): Treat "arg" as const.
2865 Handle const strings.
2866 * tracepoint.c (validate_actionline): Pass const pointer to
2867 all calls to parse_exp_1.
2868 (encode_actions_1): Likewise.
2869 * value.h (parse_to_comma_and_eval): Make argument const.
2870 (parse_and_eval_address): Likewise.
2871 (parse_and_eval): Likewise.
2872 * varobj.c (varobj_create): Pass const pointer to parse_exp_1.
2873 (varobj_set_value): Likewise.
2874 * cli/cli-cmds.c (disassemble_command): Treat "arg" as const and
2875 constify string handling.
2876 Pass const pointers to parse_and_eval_address and
2877 parse_to_comman_and_eval.
2878 * cli/cli-utils.c (skip_to_space): Rename to ...
2879 (skip_to_space_const): ... this. Handle const strings.
2880 * cli/cli-utils.h (skip_to_space): Turn into macro which invokes
2881 skip_to_space_const.
2882 (skip_to_space_const): Declare.
2883 * common/format.c (parse_format_string): Make "arg" const.
2884 Handle const strings.
2885 * common/format.h (parse_format_string): Make "arg" const.
2886 * gdbserver/ax.c (ax_printf): Make "format" const.
2887 * python/python.c (gdbpy_parse_and_eval): Do not make a copy
2888 of the expression string.
2890 2013-03-12 Hui Zhu <hui@codesourcery.com>
2892 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Update error message.
2894 2013-03-12 Yao Qi <yao@codesourcery.com>
2895 Hui Zhu <hui@codesourcery.com>
2897 * dwarf2loc.c (access_memory): Change nbits to nbytes in gdb_assert.
2898 (dwarf2_compile_expr_to_ax): Call access_memory in DW_OP_deref and
2901 2013-03-12 Paul Hilfinger <hilfingr@adacore.com>
2903 * ada-lex.l (rules): Only recognize 'thread' as a
2904 delimiter when followed by numerals, as for c-exp.y.
2905 Use new rewind_to_char function to rewind the input for
2906 expression-delimiting tokens.
2907 (rewind_to_char): New function.
2909 2013-03-11 Pedro Alves <palves@redhat.com>
2910 Jan Kratochvil <jan.kratochvil@redhat.com>
2912 * configure: Regenerate.
2913 * configure.ac (check dynamic export flag): Link python test with
2916 2013-03-11 Doug Evans <dje@google.com>
2917 Keith Seitz <keiths@redhat.com>
2919 * linespec.c (find_linespec_symbols): Call find_function_symbols
2920 first, and then call lookup_prefix_sym/find_method.
2922 2013-03-11 Pedro Alves <palves@redhat.com>
2924 * charset.c (convert_between_encodings): Don't cast between
2925 different pointer to pointer types. Instead, make the 'inp' local
2926 be of the type iconv expects.
2927 (wchar_iterate): Don't cast between different pointer to pointer
2928 types. Instead, use new pointer local of the type iconv expects.
2929 * target.c (target_read_stralloc, target_fileio_read_stralloc):
2930 Add new local of type char pointer, and use it to get a
2931 char/string view of the byte buffer, instead of casting between
2932 pointer to pointer types.
2934 2013-03-11 Hafiz Abid Qadeer <abidh@codesourcery.com>
2936 * remote.c (remote_set_trace_buffer_size): Move != operator
2937 to the start of next line to fix an ARI warning.
2939 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
2941 * NEWS: Add record changes.
2943 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
2945 * record-btrace.c (btrace_insn_history): Omit the pc prefix in
2946 the instruction history disassembly.
2947 * disasm.c (dump_insns): Omit the pc prefix, if requested.
2948 * disasm.h (DISASSEMBLY_OMIT_PC): New.
2950 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
2952 * Makefile.in (SFILES): Add record-btrace.c
2953 (COMMON_OBS): Add record-btrace.o
2954 * record-btrace.c: New.
2955 * objfiles.c: Include btrace.h.
2956 (free_objfile): call btrace_free_objfile.
2958 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
2960 * target.c (target_call_history, target_call_history_from,
2961 target_call_history_range): New.
2962 * target.h (target_ops) <to_call_history, to_call_history_from,
2963 to_call_history_range>: New fields.
2964 (target_call_history, target_call_history_from,
2965 target_call_history_range): New declaration.
2966 * record.c (get_call_history_modifiers, cmd_record_call_history,
2967 record_call_history_size): New.
2968 (_initialize_record): Add the "record function-call-history" command.
2969 Add "set/show record function-call-history-size" commands.
2970 * record.h (record_print_flag): New.
2972 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
2974 * target.h (target_ops) <to_insn_history, to_insn_history_from,
2975 to_insn_history_range>: New fields.
2976 (target_insn_history): New.
2977 (target_insn_history_from): New.
2978 (target_insn_history_range): New.
2979 * target.c (target_insn_history): New.
2980 (target_insn_history_from): New.
2981 (target_insn_history_range): New.
2982 * record.c: Include cli/cli-utils.h, disasm.h, ctype.h.
2983 (record_insn_history_size): New.
2984 (get_insn_number): New.
2985 (get_context_size): New.
2987 (get_insn_history_modifiers): New.
2988 (cmd_record_insn_history): New.
2989 (_initialize_record): Add "set/show record instruction-history-size"
2990 command. Add "record instruction-history" command.
2992 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
2994 * record.h (record_disconnect): New.
2995 (record_detach): New.
2996 (record_mourn_inferior): New.
2998 * record-full.c (record_disconnect, record_detach,
2999 record_mourn_inferior, record_kill): Move to...
3000 * record.c: ...here.
3003 (record_unpush): New.
3004 (cmd_record_stop): Call record_stop. Replace unpush_target
3005 call with record_unpush call.
3006 (record_disconnect, record_detach): Assert that the target
3007 is of record stratum. Call record_unpush, record_stop, and
3009 (record_mourn_inferior, record_kill): Assert that the target
3010 is of record stratum. Call record_unpush and DEBUG.
3012 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
3014 * record-full.h, record-full.c (record_memory_query): Rename
3016 (record_full_memory_query): ...this. Update all users.
3017 (record_arch_list_add_reg): Rename to ...
3018 (record_full_arch_list_add_reg): ...this. Update all users.
3019 (record_arch_list_add_mem): Rename to ...
3020 (record_full_arch_list_add_mem): ...this. Update all users.
3021 (record_arch_list_add_end): Rename to ...
3022 (record_full_arch_list_add_end): ...this. Update all users.
3023 (record_gdb_operation_disable_set): Rename to ...
3024 (record_full_gdb_operation_disable_set): ...this.
3027 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
3029 * record-full.c (DEFAULT_RECORD_INSN_MAX_NUM): Renamed to ...
3030 (DEFAULT_RECORD_FULL_INSN_MAX_NUM): ... this. Updated all users.
3031 (RECORD_IS_REPLAY): Renamed to ...
3032 (RECORD_FULL_IS_REPLAY): ... this. Updated all users.
3033 (RECORD_FILE_MAGIC): Renamed to ...
3034 (RECORD_FULL_FILE_MAGIC): ... this. Updated all users.
3035 (record_mem_entry): Renamed to ...
3036 (record_full_mem_entry): ... this. Updated all users.
3037 (record_reg_entry): Renamed to ...
3038 (record_full_reg_entry): ... this. Updated all users.
3039 (record_end_entry): Renamed to ...
3040 (record_full_end_entry): ... this. Updated all users.
3041 (record_type) <record_end, record_reg, record_mem>: Renamed
3043 (record_full_type) <record_full_end, record_full_reg,
3044 record_full_mem>: ... this. Updated all users.
3045 (record_entry): Renamed to ...
3046 (record_full_entry): ... this. Updated all users.
3047 (record_core_buf_entry): Renamed to ...
3048 (record_full_core_buf_entry): ... this. Updated all users.
3049 (record_core_regbuf): Renamed to ...
3050 (record_full_core_regbuf): ... this. Updated all users.
3051 (record_core_start): Renamed to ...
3052 (record_full_core_start): ... this. Updated all users.
3053 (record_core_end): Renamed to ...
3054 (record_full_core_end): ... this. Updated all users.
3055 (record_core_buf_list): Renamed to ...
3056 (record_full_core_buf_list): ... this. Updated all users.
3057 (record_first): Renamed to ...
3058 (record_full_first): ... this. Updated all users.
3059 (record_list): Renamed to ...
3060 (record_full_list): ... this. Updated all users.
3061 (record_arch_list_head): Renamed to ...
3062 (record_full_arch_list_head): ... this. Updated all users.
3063 (record_arch_list_tail): Renamed to ...
3064 (record_full_arch_list_tail): ... this. Updated all users.
3065 (record_stop_at_limit): Renamed to ...
3066 (record_full_stop_at_limit): ... this. Updated all users.
3067 (record_insn_max_num): Renamed to ...
3068 (record_full_insn_max_num): ... this. Updated all users.
3069 (record_insn_num): Renamed to ...
3070 (record_full_insn_num): ... this. Updated all users.
3071 (record_insn_count): Renamed to ...
3072 (record_full_insn_count): ... this. Updated all users.
3073 (record_ops): Renamed to ...
3074 (record_full_ops): ... this. Updated all users.
3075 (record_core_ops): Renamed to ...
3076 (record_full_core_ops): ... this. Updated all users.
3077 (set_record_cmdlist): Renamed to ...
3078 (set_record_full_cmdlist): ... this. Updated all users.
3079 (show_record_cmdlist): Renamed to ...
3080 (show_record_full_cmdlist): ... this. Updated all users.
3081 (record_cmdlist): Renamed to ...
3082 (record_full_cmdlist): ... this. Updated all users.
3083 (record_beneath_to_resume_ops): Renamed to ...
3084 (record_full_beneath_to_resume_ops): ... this. Updated all users.
3085 (record_beneath_to_resume): Renamed to ...
3086 (record_full_beneath_to_resume): ... this. Updated all users.
3087 (record_beneath_to_wait_ops): Renamed to ...
3088 (record_full_beneath_to_wait_ops): ... this. Updated all users.
3089 (record_beneath_to_wait): Renamed to ...
3090 (record_full_beneath_to_wait): ... this. Updated all users.
3091 (record_beneath_to_store_registers_ops): Renamed to ...
3092 (record_full_beneath_to_store_registers_ops): ... this.
3094 (record_beneath_to_store_registers): Renamed to ...
3095 (record_full_beneath_to_store_registers): ... this.
3097 (record_beneath_to_xfer_partial_ops): Renamed to ...
3098 (record_full_beneath_to_xfer_partial_ops): ... this.
3100 (record_beneath_to_xfer_partial): Renamed to ...
3101 (record_full_beneath_to_xfer_partial): ... this.
3103 (record_beneath_to_insert_breakpoint): Renamed to ...
3104 (record_full_beneath_to_insert_breakpoint): ... this.
3106 (record_beneath_to_stopped_by_watchpoint): Renamed to ...
3107 (record_full_beneath_to_stopped_by_watchpoint): ... this.
3109 (record_beneath_to_stopped_data_address): Renamed to ...
3110 (record_full_beneath_to_stopped_data_address): ... this.
3112 (record_beneath_to_async): Renamed to ...
3113 (record_full_beneath_to_async): ... this. Updated all users.
3114 (record_goto_insn): Renamed to ...
3115 (record_full_goto_insn): ... this. Updated all users.
3116 (record_save): Renamed to ...
3117 (record_full_save): ... this. Updated all users.
3118 (record_reg_alloc): Renamed to ...
3119 (record_full_reg_alloc): ... this. Updated all users.
3120 (record_reg_release): Renamed to ...
3121 (record_full_reg_release): ... this. Updated all users.
3122 (record_mem_alloc): Renamed to ...
3123 (record_full_mem_alloc): ... this. Updated all users.
3124 (record_mem_release): Renamed to ...
3125 (record_full_mem_release): ... this. Updated all users.
3126 (record_end_alloc): Renamed to ...
3127 (record_full_end_alloc): ... this. Updated all users.
3128 (record_end_release): Renamed to ...
3129 (record_full_end_release): ... this. Updated all users.
3130 (record_entry_release): Renamed to ...
3131 (record_full_entry_release): ... this. Updated all users.
3132 (record_list_release): Renamed to ...
3133 (record_full_list_release): ... this. Updated all users.
3134 (record_list_release_following): Renamed to ...
3135 (record_full_list_release_following): ... this.
3137 (record_list_release_first): Renamed to ...
3138 (record_full_list_release_first): ... this. Updated all users.
3139 (record_arch_list_add): Renamed to ...
3140 (record_full_arch_list_add): ... this. Updated all users.
3141 (record_get_loc): Renamed to ...
3142 (record_full_get_loc): ... this. Updated all users.
3143 (record_check_insn_num): Renamed to ...
3144 (record_full_check_insn_num): ... this. Updated all users.
3145 (record_arch_list_cleanups): Renamed to ...
3146 (record_full_arch_list_cleanups): ... this. Updated all users.
3147 (record_message): Renamed to ...
3148 (record_full_message): ... this. Updated all users.
3149 (record_message_wrapper): Renamed to ...
3150 (record_full_message_wrapper): ... this. Updated all users.
3151 (record_message_wrapper_safe): Renamed to ...
3152 (record_full_message_wrapper_safe): ... this. Updated all users.
3153 (record_gdb_operation_disable): Renamed to ...
3154 (record_full_gdb_operation_disable): ... this. Updated all users.
3155 (record_hw_watchpoint): Renamed to ...
3156 (record_full_hw_watchpoint): ... this. Updated all users.
3157 (record_exec_insn): Renamed to ...
3158 (record_full_exec_insn): ... this. Updated all users.
3159 (record_restore): Renamed to ...
3160 (record_full_restore): ... this. Updated all users.
3161 (record_async_inferior_event_token): Renamed to ...
3162 (record_full_async_inferior_event_token): ... this.
3164 (record_async_inferior_event_handler): Renamed to ...
3165 (record_full_async_inferior_event_handler): ... this.
3167 (record_core_open_1): Renamed to ...
3168 (record_full_core_open_1): ... this. Updated all users.
3169 (record_open_1): Renamed to ...
3170 (record_full_open_1): ... this. Updated all users.
3171 (record_open): Renamed to ...
3172 (record_full_open): ... this. Updated all users.
3173 (record_close): Renamed to ...
3174 (record_full_close): ... this. Updated all users.
3175 (record_resume_step): Renamed to ...
3176 (record_full_resume_step): ... this. Updated all users.
3177 (record_resumed): Renamed to ...
3178 (record_full_resumed): ... this. Updated all users.
3179 (record_execution_dir): Renamed to ...
3180 (record_full_execution_dir): ... this. Updated all users.
3181 (record_resume): Renamed to ...
3182 (record_full_resume): ... this. Updated all users.
3183 (record_get_sig): Renamed to ...
3184 (record_full_get_sig): ... this. Updated all users.
3185 (record_sig_handler): Renamed to ...
3186 (record_full_sig_handler): ... this. Updated all users.
3187 (record_wait_cleanups): Renamed to ...
3188 (record_full_wait_cleanups): ... this. Updated all users.
3189 (record_wait_1): Renamed to ...
3190 (record_full_wait_1): ... this. Updated all users.
3191 (record_wait): Renamed to ...
3192 (record_full_wait): ... this. Updated all users.
3193 (record_stopped_by_watchpoint): Renamed to ...
3194 (record_full_stopped_by_watchpoint): ... this. Updated all users.
3195 (record_disconnect): Renamed to ...
3196 (record_full_disconnect): ... this. Updated all users.
3197 (record_detach): Renamed to ...
3198 (record_full_detach): ... this. Updated all users.
3199 (record_mourn_inferior): Renamed to ...
3200 (record_full_mourn_inferior): ... this. Updated all users.
3201 (record_kill): Renamed to ...
3202 (record_full_kill): ... this. Updated all users.
3203 (record_stopped_data_address): Renamed to ...
3204 (record_full_stopped_data_address): ... this. Updated all users.
3205 (record_registers_change): Renamed to ...
3206 (record_full_registers_change): ... this. Updated all users.
3207 (record_store_registers): Renamed to ...
3208 (record_full_store_registers): ... this. Updated all users.
3209 (record_xfer_partial): Renamed to ...
3210 (record_full_xfer_partial): ... this. Updated all users.
3211 (record_breakpoint): Renamed to ...
3212 (record_full_breakpoint): ... this. Updated all users.
3213 (record_breakpoint_p): Renamed to ...
3214 (record_full_breakpoint_p): ... this. Updated all users.
3215 (record_breakpoints): Renamed to ...
3216 (record_full_breakpoints): ... this. Updated all users.
3217 (record_sync_record_breakpoints): Renamed to ...
3218 (record_full_sync_record_breakpoints): ... this.
3220 (record_init_record_breakpoints): Renamed to ...
3221 (record_full_init_record_breakpoints): ... this.
3223 (record_insert_breakpoint): Renamed to ...
3224 (record_full_insert_breakpoint): ... this. Updated all users.
3225 (record_remove_breakpoint): Renamed to ...
3226 (record_full_remove_breakpoint): ... this. Updated all users.
3227 (record_can_execute_reverse): Renamed to ...
3228 (record_full_can_execute_reverse): ... this. Updated all users.
3229 (record_get_bookmark): Renamed to ...
3230 (record_full_get_bookmark): ... this. Updated all users.
3231 (record_goto_bookmark): Renamed to ...
3232 (record_full_goto_bookmark): ... this. Updated all users.
3233 (record_async): Renamed to ...
3234 (record_full_async): ... this. Updated all users.
3235 (record_can_async_p): Renamed to ...
3236 (record_full_can_async_p): ... this. Updated all users.
3237 (record_is_async_p): Renamed to ...
3238 (record_full_is_async_p): ... this. Updated all users.
3239 (record_execution_direction): Renamed to ...
3240 (record_full_execution_direction): ... this. Updated all users.
3241 (record_info): Renamed to ...
3242 (record_full_info): ... this. Updated all users.
3243 (record_delete): Renamed to ...
3244 (record_full_delete): ... this. Updated all users.
3245 (record_is_replaying): Renamed to ...
3246 (record_full_is_replaying): ... this. Updated all users.
3247 (record_goto_entry): Renamed to ...
3248 (record_full_goto_entry): ... this. Updated all users.
3249 (record_goto_begin): Renamed to ...
3250 (record_full_goto_begin): ... this. Updated all users.
3251 (record_goto_end): Renamed to ...
3252 (record_full_goto_end): ... this. Updated all users.
3253 (record_goto): Renamed to ...
3254 (record_full_goto): ... this. Updated all users.
3255 (init_record_ops): Renamed to ...
3256 (init_record_full_ops): ... this. Updated all users.
3257 (record_core_resume): Renamed to ...
3258 (record_full_core_resume): ... this. Updated all users.
3259 (record_core_kill): Renamed to ...
3260 (record_full_core_kill): ... this. Updated all users.
3261 (record_core_fetch_registers): Renamed to ...
3262 (record_full_core_fetch_registers): ... this. Updated all users.
3263 (record_core_prepare_to_store): Renamed to ...
3264 (record_full_core_prepare_to_store): ... this. Updated all users.
3265 (record_core_store_registers): Renamed to ...
3266 (record_full_core_store_registers): ... this. Updated all users.
3267 (record_core_xfer_partial): Renamed to ...
3268 (record_full_core_xfer_partial): ... this. Updated all users.
3269 (record_core_insert_breakpoint): Renamed to ...
3270 (record_full_core_insert_breakpoint): ... this. Updated all users.
3271 (record_core_remove_breakpoint): Renamed to ...
3272 (record_full_core_remove_breakpoint): ... this. Updated all users.
3273 (record_core_has_execution): Renamed to ...
3274 (record_full_core_has_execution): ... this. Updated all users.
3275 (init_record_core_ops): Renamed to ...
3276 (init_record_full_core_ops): ... this. Updated all users.
3277 (cmd_record_restore): Renamed to ...
3278 (cmd_record_full_restore): ... this. Updated all users.
3279 (record_save_cleanups): Renamed to ...
3280 (record_full_save_cleanups): ... this. Updated all users.
3281 (cmd_record_start): Renamed to ...
3282 (cmd_record_full_start): ... this. Updated all users.
3283 (set_record_insn_max_num): Renamed to ...
3284 (set_record_full_insn_max_num): ... this. Updated all users.
3285 (set_record_command): Renamed to ...
3286 (set_record_full_command): ... this. Updated all users.
3287 (show_record_command): Renamed to ...
3288 (show_record_full_command): ... this. Updated all users.
3289 (_initialize_record): Renamed to ...
3290 (_initialize_record_full): ... this. Updated all users.
3292 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
3294 * record.h: Split into this and ...
3295 * record-full.h: ... this.
3296 * record.c: Split into this and ...
3297 * record-full.c: ... this.
3298 * target.h (target_ops): Add new fields to_info_record,
3299 to_save_record, to_delete_record, to_record_is_replaying,
3300 to_goto_record_begin, to_goto_record_end, to_goto_record.
3301 (target_info_record): New.
3302 (target_save_record): New.
3303 (target_supports_delete_record): New.
3304 (target_delete_record): New.
3305 (target_record_is_replaying): New.
3306 (target_goto_record_begin): New.
3307 (target_goto_record_end): New.
3308 (target_goto_record): New.
3309 * target.c (target_info_record): New.
3310 (target_save_record): New.
3311 (target_supports_delete_record): New.
3312 (target_delete_record): New.
3313 (target_record_is_replaying): New.
3314 (target_goto_record_begin): New.
3315 (target_goto_record_end): New.
3316 (target_goto_record): New.
3317 * record.h: Declare struct cmd_list_element.
3318 (record_cmdlist): New declaration.
3319 (set_record_cmdlist): New declaration.
3320 (show_record_cmdlist): New declaration.
3321 (info_record_cmdlist): New declaration.
3322 (cmd_record_goto): New declaration.
3323 * record.c: Remove unnecessary includes.
3325 (cmd_record_goto): Remove declaration.
3326 (record_cmdlist): Now extern. Initialize.
3327 (set_record_cmdlist): Now extern. Initialize.
3328 (show_record_cmdlist): Now extern. Initialize.
3329 (info_record_cmdlist): Now extern. Initialize.
3330 (find_record_target): New.
3331 (require_record_target): New.
3332 (cmd_record_start): Update.
3333 (cmd_record_delete): Remove target-specific code.
3334 Call target_delete_record.
3335 (cmd_record_stop): Unpush any record target.
3336 (set_record_insn_max_num): Move to record-full.c
3337 (set_record_command): Add comment.
3338 (show_record_command): Add comment.
3339 (info_record_command): Update comment.
3340 Remove target-specific code.
3341 Call the record target's to_info_record.
3342 (cmd_record_start): New.
3343 (cmd_record_goto): Now extern.
3344 Remove target-specific code.
3345 Call target_goto_begin, target_goto_end, or target_goto.
3346 (_initialize_record): Move record target ops initialization to
3348 Change "record" command help text.
3349 Move "record restore", "record set", and "record show" commands to
3351 * Makefile.in (SFILES): Add record-full.c.
3352 (HFILES_NO_SRCDIR): Add record-full.h.
3353 (COMMON_OBS): Add record-full.o.
3354 * amd64-linux-tdep.c: Include record-full.h instead of record.h.
3355 * arm-tdep.c: Include record-full.h.
3356 * i386-linux-tdep.c: Include record-full.h instead of record.h.
3357 * i386-tdep.c: Include record-full.h.
3358 * infrun.c: Include record-full.h.
3359 * linux-record.c: Include record-full.h.
3360 * moxie-tdep.c: Include record-full.h.
3361 * record-full.c: Include record-full.h.
3362 Change module comment.
3363 (set_record_full_cmdlist): New.
3364 (show_record_full_cmdlist): New.
3365 (record_full_cmdlist): New.
3366 (record_goto_insn): New declaration.
3367 (record_save): New declaration.
3368 (record_check_insn_num): Change query string.
3370 (record_delete): New.
3371 (record_is_replaying): New.
3372 (record_goto_entry): New.
3373 (record_goto_begin): New.
3374 (record_goto_end): New.
3376 (init_record_ops): Update.
3377 (init_record_core_ops): Update.
3378 (cmd_record_save): Rename to record_save. Remove target and arg checks.
3379 (cmd_record_start): New.
3380 (set_record_insn_max_num): Moved from record.c
3381 (set_record_full_command): New.
3382 (show_record_full_command): New.
3383 (_initialize_record_full): New.
3385 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
3387 * target.h (add_deprecated_target_alias): New.
3388 * target.c (add_deprecated_target_alias): New.
3390 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
3392 * common/linux-btrace.c: Include sys/ptrace, sys/types, sys/wait.h,
3394 (linux_supports_btrace): Add kernel and
3396 (kernel_supports_btrace): New function.
3397 (cpu_supports_btrace): New function.
3398 (intel_supports_btrace): New function.
3400 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
3402 * target.h (enum target_object): Add TARGET_OBJECT_BTRACE.
3403 * remote.c: Include btrace.h.
3404 (struct btrace_target_info): New struct.
3405 (remote_supports_btrace): New function.
3406 (send_Qbtrace): New function.
3407 (remote_enable_btrace): New function.
3408 (remote_disable_btrace): New function.
3409 (remote_teardown_btrace): New function.
3410 (remote_read_btrace): New function.
3411 (init_remote_ops): Add btrace ops.
3412 (enum <unnamed>): Add btrace packets.
3413 (struct protocol_feature remote_protocol_features[]): Add btrace packets.
3414 (_initialize_remote): Add packet configuration for branch tracing.
3416 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
3418 * features/btrace.dtd: New file.
3419 * Makefile.in (XMLFILES): Add btrace.dtd.
3420 * btrace.h (parse_xml_btrace): New declaration.
3421 * btrace.c: Include xml-support.h.
3422 (parse_xml_btrace): New function.
3423 (parse_xml_btrace_block): New function.
3424 (block_attributes): New struct.
3425 (btrace_attributes): New struct.
3426 (btrace_children): New struct.
3427 (btrace_elements): New struct.
3429 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
3431 * amd64-linux-nat.c: Include btrace.h and linux-btrace.h.
3432 (amd64_linux_enable_btrace): New.
3433 (amd64_linux_disable_btrace): New.
3434 (amd64_linux_teardown_btrace): New.
3435 (_initialize_amd64_linux_nat): Initialize btrace ops.
3436 * i386-linux.nat.c: Include btrace.h and linux-btrace.h.
3437 (i386_linux_enable_btrace): New.
3438 (i386_linux_disable_btrace): New.
3439 (i386_linux_teardown_btrace): New.
3440 (_initialize_i386_linux_nat): Initialize btrace ops.
3441 * config/i386/linux.mh: Add linux-btrace.o.
3442 * config/i386/linux64.mh: Add linux-btrace.o.
3444 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
3446 * common/linux_btrace.h: New file.
3447 * common/linux_btrace.c: New file.
3448 * Makefile.in (SFILES): Add btrace.c.
3449 (HFILES_NO_SRCDIR): Add common/linux-btrace.h.
3450 (COMMON_OBS): Add btrace.o.
3451 (linux-btrace.o): New rule.
3453 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
3455 * target.h: Include btrace.h.
3456 (struct target_ops) <to_supports_btrace, to_enable_btrace,
3457 to_disable_btrace, to_teardown_btrace, to_read_btrace>: New.
3458 * target.c (target_supports_btrace): New function.
3459 (target_enable_btrace): New function.
3460 (target_disable_btrace): New function.
3461 (target_teardown_btrace): New function.
3462 (target_read_btrace): New function.
3463 * btrace.h: New file.
3464 * btrace.c: New file.
3465 * Makefile.in: Add btrace.c.
3466 * gdbthread.h: Include btrace.h.
3467 (struct thread_info): Add btrace field.
3468 * thread.c: Include btrace.h.
3469 (clear_thread_inferior_resources): Call target_teardown_btrace.
3470 * common/btrace-common.h: New file.
3472 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
3474 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Call also kill
3475 for CHILD, ignore PTRACE_KILL errors, move the inner block variable
3476 kill_status to outer block.
3478 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
3480 Fix entry-values if the callee called a noreturn function.
3481 * dwarf2-frame-tailcall.c (dwarf2_tailcall_sniffer_first): Use
3482 get_frame_address_in_block. Add new comment.
3484 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
3486 Fix entry-values in C++ across CUs.
3487 * dwarf2loc.c (call_site_to_target_addr) <FIELD_LOC_KIND_PHYSNAME>: Use
3488 lookup_minimal_symbol. Add a comment.
3490 (read_call_site_scope) <is_ref_attr> <die_is_declaration>: Prefer
3493 2013-03-08 Yao Qi <yao@codesourcery.com>
3495 * tracepoint.c (_initialize_tracepoint): Indent the code.
3497 2013-03-08 Pedro Alves <palves@redhat.com>
3499 * findcmd.c (put_bits): Change type of parameter to 'gdb_byte *'.
3500 (parse_find_args, find_command): Change type of pattern buffer
3501 locals to 'gdb_byte *'.
3503 2013-03-08 Stan Shebs <stan@codesourcery.com>
3504 Hafiz Abid Qadeer <abidh@codesourcery.com>
3506 * NEWS: Mention set and show trace-buffer-size commands.
3508 * target.h (struct target_ops): New method
3509 to_set_trace_buffer_size.
3510 (target_set_trace_buffer_size): New macro.
3511 * target.c (update_current_target): Set up new method.
3512 * tracepoint.c (trace_buffer_size): New global.
3513 (start_tracing): Send it to the target.
3514 (set_trace_buffer_size): New function.
3515 (_initialize_tracepoint): Add new setshow for trace-buffer-size.
3516 * remote.c (remote_set_trace_buffer_size): New function.
3517 (_initialize_remote): Use it.
3518 (QTBuffer:size) New remote command.
3519 (PACKET_QTBuffer_size): New enum.
3520 (remote_protocol_features): Add an entry for
3521 PACKET_QTBuffer_size.
3523 2013-03-08 Tom Tromey <tromey@redhat.com>
3525 * remote-m32r-sdi.c (m32r_load): Call skip_spaces on correct
3528 2013-03-07 Pedro Alves <palves@redhat.com>
3530 * target.c (target_read_stralloc, target_fileio_read_alloc):
3531 *Cast pointer to 'gdb_byte *' in target call.
3533 2013-03-07 Pedro Alves <palves@redhat.com>
3535 * corefile.c (read_memory_string): Cast pointer to gdb_byte* in
3538 2013-03-07 Keith Seitz <keiths@redhat.com>
3540 * breakpoint.c (catch_syscall_split_args): Use skip_spaces.
3541 (trace_pass_command): Likewise.
3542 * cli/cli-cmds.c: Include cli/cli-utils.h.
3543 (source_command): Use skip-spaces.
3544 (disassemble_command): Likewise.
3545 * findcmd.c: Include cli/cli-utils.h.
3546 (parse_find_args): Use skip_spaces.
3547 * go32-nat.c: Include cli/cli-utils.h.
3548 (go32_sldt): Use skip_spaces.
3549 (go32_sgdt): Likewise.
3550 (go32_sidt): Likewise.
3551 (go32_pde): Likewise.
3552 (go32_pte): Likewise.
3553 (go32_pte_for_address): Likewise.
3554 * infcmd.c: Include cli/cli-utils.h.
3555 (registers_info): Use skip_spaces.
3556 * linux-tdep.c (read_mapping): Use skip_spaces_const.
3557 (linux_info_proc): Likewise.
3558 * linux-thread-db.c: Include cli/cli-utils.h.
3559 (info_auto_load_libthread_db): Use skip_spaces_const.
3560 * m32r-rom.c: Include cli/cli-utils.h.
3561 (m32r_upload_command): Use skip_spaces.
3562 * maint.c: Include cli/cli-utils.h.
3563 (maintenance_translate_address): Use skip_spaces.
3564 * mi/mi-parse.c: Include cli/cli-utils.h.
3565 (mi_parse_argv): Use skip_spaces.
3566 (mi_parse): Likewise.
3567 * minsyms.c: Include cli/cli-utils.h.
3568 (msymbol_hash_iw): Use skip_spaces_const.
3569 * objc-lang.c: Include cli/cli-utils.h.
3570 (parse_selector): Use skip_spaces.
3571 (parse_method): Likewise.
3572 * python/python.c: Include cli/cli-utils.h.
3573 (python_interactive_command)[HAVE_PYTHON]: Use skip_spaces.
3574 (python_command)[HAVE_PYTHON]: Likewise.
3575 (python_interactive_command)[!HAVE_PYTHON]: Likewise.
3576 * remote-m32r-sdi.c: Include cli/cli-utils.h.
3577 (m32r_load): Use skip_spaces.
3578 * serial.c: Include cli/cli-utils.h.
3579 (serial_open): Use skip_spaces_const.
3580 * stack.c: Include cli/cli-utils.h.
3581 (parse_frame_specification_1): Use skip_spaces_const.
3582 * symfile.c: Include cli/cli-utils.h.
3583 (set_ext_lang_command): Use skip_spaces.
3584 * symtab.c: Include cli/cli-utils.h.
3585 (rbreak_command): Use skip_spaces.
3586 * thread.c (thread_name_command): Use skip_spaces.
3587 * tracepoint.c (validate_actionline): Use skip_spaces.
3588 (encode_actions_1): Likewise.
3589 (trace_find_range_command): Likewise.
3590 (trace_find_outside_command): Likewise.
3591 (trace_dump_actions): Likewise.
3593 2013-03-07 Pedro Alves <palves@redhat.com>
3595 * c-lang.c (parse_one_string): Cast argument to gdb_byte *.
3596 * expprint.c (print_subexp_standard): Likewise.
3597 * utils.c (host_char_to_target): Likewise.
3598 * valprint.c (generic_emit_char, generic_printstr): Likewise.
3599 * varobj.c (value_get_print_value): Change type of local to char*.
3600 Cast it gdb_byte * in call to language printer.
3602 2013-03-07 Pedro Alves <palves@redhat.com>
3604 * charset.c (struct wchar_iterator) <input>: Change type to 'const
3606 (make_wchar_iterator): Remove cast to char*.
3607 (wchar_iterate): Change type of local.
3609 2013-03-07 Pedro Alves <palves@redhat.com>
3611 * regcache.c (regcache_xmalloc_1): Call XCALLOC with signed char
3612 for 'regcache->register_status'.
3614 2013-03-07 Pedro Alves <palves@redhat.com>
3616 * breakpoint.c (breakpoint_xfer_memory): Change type of local to
3619 2013-03-07 Pedro Alves <palves@redhat.com>
3621 * stap-probe.c (handle_stap_probe): Add cast to char*.
3623 2013-03-07 Pedro Alves <palves@redhat.com>
3625 * linux-record.c (record_linux_system_call) <gdb_sys_msgrcv,
3626 RECORD_MSGRCV>: Pass a signed variable to
3627 regcache_raw_read_signed, instead of an unsigned one.
3629 2013-03-07 Pedro Alves <palves@redhat.com>
3631 * remote-notif.c (notif_debug): Change type to int.
3632 * remote-notif.h (notif_debug): Likewise.
3634 2013-03-07 Pedro Alves <palves@redhat.com>
3636 * ser-tcp.c (tcp_retry_limit): Change type to unsigned int.
3638 2013-03-07 Pedro Alves <palves@redhat.com>
3640 * remote.c (hex2bin, bin2hex): Move extern declarations to ...
3641 * remote.h (hex2bin, bin2hex): ... here.
3642 * tracepoint.c (hex2bin, bin2hex): Remove extern declarations.
3644 2013-03-07 Eli Zaretskii <eliz@gnu.org>
3646 * utils.c (initialize_utils): Improve doc strings of "set/show
3647 width", "set/show height", and "set/show pagination".
3649 2013-03-06 Keith Seitz <keiths@redhat.com>
3651 * ax-gdb.c (gen_printf): Make FORMAT const.
3652 * ax-gdb.h (gen_printf): Likewise.
3653 * ax-general.c (ax_string): Make STR const.
3654 * ax.h (ax_string): Likewise.
3656 2013-03-06 Doug Evans <dje@google.com>
3658 * elfread.c (elf_symfile_read): Move debugging printf to more
3661 2013-03-06 Pedro Alves <palves@redhat.com>
3663 * python/py-utils.c (target_string_to_unicode): Delete function.
3664 * python/python-internal.h (target_string_to_unicode): Delete
3667 2013-03-06 Pierre Muller <muller@sourceware.org>
3669 * linespec.c (get_current_search_block): ARI fix, use (void)
3670 for empty parameter list.
3672 2013-03-05 Doug Evans <dje@google.com>
3674 * ada-lang.c (ada_lookup_symbol_list_worker): New function, contents
3675 of old ada_lookup_symbol_list. In !full_search case, don't
3677 (ada_lookup_symbol_list): Delete arg full_search, all callers
3678 updated. Call ada_lookup_symbol_list_worker.
3679 (ada_iterate_over_symbols): Call ada_lookup_symbol_list_worker.
3680 * ada-lang.h (ada_lookup_symbol_list): Update.
3681 * language.h (language_defn): Update comment for
3682 la_iterate_over_symbols.
3683 * linespec.c (iterate_over_file_blocks): New function.
3684 (iterate_over_all_matching_symtabs): Call it.
3685 (lookup_prefix_sym): Ditto.
3686 (get_current_search_block): New function.
3687 (get_search_block): Delete.
3688 (find_label_symbols): Call get_current_search_block.
3689 (add_matching_symbols_to_info): Call iterate_over_file_blocks.
3690 * symtab.c (iterate_over_symbols): Don't search superblocks.
3692 2013-03-05 Yao Qi <yao@codesourcery.com>
3694 * cli/cli-decode.c (add_setshow_zuinteger_unlimited_cmd): Change
3695 parameter VAR's type from "unsigned int" to "int".
3696 * command.h (var_zuinteger_unlimited): Update its comments.
3697 (add_setshow_zuinteger_unlimited_cmd): Update the declaration.
3699 2013-03-05 Corinna Vinschen <vinschen@redhat.de>
3701 * NEWS: Mention new target x86_64-*-cygwin*.
3703 2013-03-05 Corinna Vinschen <vinschen@redhat.de>
3705 * configure.host: Add x86_64-*-cygwin* as host.
3706 * configure.tgt: Add x86_64-*-cygwin* as target.
3707 * config/i386/cygwin64.mh: New file.
3709 2013-03-04 Jan Kratochvil <jan.kratochvil@redhat.com>
3711 * linespec.c (decode_line_2): Fix duplicate request off by two message.
3713 2013-03-04 Jan Kratochvil <jan.kratochvil@redhat.com>
3715 * linespec.c (struct linespec_canonical_name): New.
3716 (struct linespec_state): Change canonical_names type to it.
3717 (add_sal_to_sals): Change variable canonical_name to canonical. Change
3718 xrealloc element size. Initialize the different CANONICAL fields.
3719 (canonical_to_fullform): New.
3720 (filter_results): Use it. Add variables canonical, fullform and
3722 (struct decode_line_2_item, decode_line_2_compare_items): New.
3723 (decode_line_2): Remove variables iter and item_names, add variables
3724 items and items_count. Modify the code for these new variables.
3726 2013-03-04 Corinna Vinschen <vinschen@redhat.com>
3728 * coff-pe-read.c (read_pe_exported_syms): Don't return without
3731 2013-03-04 Luis Machado <lgustavo@codesourcery.com>
3733 * tracepoint.c (build_traceframe_info): Add code for byte order.
3735 2013-03-02 Kevin Buettner <kevinb@redhat.com>
3737 * v850-tdep.c: (v850e2_register_name): Revise system register
3738 names to match current V850E2M architecture specifications.
3739 Update register number enum comments too.
3741 2013-03-01 Jiong Wang <jiwang@tilera.com>
3742 Pedro Alves <palves@redhat.com>
3744 * tilegx-tdep.c (tilegx_analyze_prologue): Limit bundle reading
3746 (tilegx_skip_prologue): Limit prologue analysis to section end.
3748 2013-03-01 Jan Kratochvil <jan.kratochvil@redhat.com>
3750 * dwarf2loc.c (call_site_find_chain_1): New variable save_callee_pc,
3753 2013-03-01 Pedro Alves <palves@redhat.com>
3755 Use gdb_byte for bytes from the program being debugged.
3757 * arm-tdep.c (arm_store_return_value, arm_get_longjmp_target):
3758 Change type of local 'buf' to gdb_byte.
3759 * avr-tdep.c (avr_frame_prev_register, avr_push_dummy_call): Likewise.
3760 * bfin-tdep.c (bfin_push_dummy_call): Likewise.
3761 * cris-tdep.c (cris_sigcontext_addr)
3762 (cris_sigtramp_frame_unwind_cache): Likewise.
3763 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp)
3764 (frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
3766 * frv-tdep.c (frv_pseudo_register_write, frv_analyze_prologue): Likewise.
3767 * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer)
3768 (hppa32_hpux_search_dummy_call_sequence)
3769 (hppa_hpux_supply_save_state): Likewise.
3770 * hppa-linux-tdep.c (insns_match_pattern)
3771 (hppa_linux_find_global_pointer): Likewise.
3772 * hppa-tdep.c (hppa_in_function_epilogue_p)
3773 (skip_prologue_hard_way, hppa_frame_cache): Likewise.
3774 * i386-nto-tdep.c (i386nto_sigcontext_addr): Likewise.
3775 * i386fbsd-tdep.c (i386fbsd_supply_uthread)
3776 (i386fbsd_collect_uthread): Likewise.
3777 * ia64-hpux-tdep.c (ia64_hpux_push_dummy_code): Likewise.
3778 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Likewise.
3779 * ia64-tdep.c (examine_prologue, ia64_frame_cache)
3780 (ia64_frame_prev_register, ia64_sigtramp_frame_cache)
3781 (ia64_sigtramp_frame_prev_register, ia64_access_reg)
3782 (ia64_access_rse_reg, ia64_libunwind_frame_this_id)
3783 (ia64_libunwind_frame_prev_register)
3784 (ia64_libunwind_sigtramp_frame_this_id)
3785 (ia64_find_global_pointer_from_dynamic_section)
3786 (find_extant_func_descr, find_func_descr, ia64_dummy_id)
3787 (ia64_unwind_pc): Likewise.
3788 * iq2000-tdep.c (iq2000_store_return_value): Likewise.
3789 * m68hc11-tdep.c (m68hc11_push_dummy_call)
3790 (m68hc11_extract_return_value): Likewise.
3791 * m68klinux-nat.c (fetch_register, store_register): Likewise.
3792 * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_cr32_write)
3793 (mep_get_insn, mep_push_dummy_call): Likewise.
3794 * mips-linux-tdep.c (mips_linux_get_longjmp_target)
3795 (mips_linux_in_dynsym_stub): Likewise.
3796 * mn10300-tdep.c (mep_pseudo_cr32_write): Likewise.
3797 * ppc-linux-nat.c (fetch_register, store_register): Likewise.
3798 * regcache.c (dump_endian_bytes): Change type of parameter 'buf'
3800 * remote-mips.c (mips_set_register): Likewise.
3801 * remote-sim.c (gdbsim_fetch_register): Likewise.
3802 * score-tdep.c (score7_fetch_inst): Change type of parameter
3803 'memblock' and local 'buf' to gdb_byte.
3804 (score7_malloc_and_get_memblock): Change return type to gdb_byte.
3805 Change type of local 'buf' to gdb_byte. Adjust.
3806 (score7_adjust_memblock_ptr): Change type of parameter 'memblock'
3808 (score7_analyze_prologue): Change type of 'memblock' and
3809 'memblock_ptr' locals to gdb_byte*.
3810 * sh64-tdep.c (sh64_extract_return_value)
3811 (sh64_store_return_value): Change type of local 'buf' to gdb_byte.
3812 * solib-darwin.c (darwin_current_sos, darwin_read_exec_load_addr):
3813 * solib-pa64.c (pa64_solib_create_inferior_hook)
3814 (pa64_open_symbol_file_object): Remove local 'buf'.
3815 * solib-som.c (som_solib_create_inferior_hook, link_map_start)
3816 (som_open_symbol_file_object): Likewise.
3817 * solib-spu.c (spu_current_sos): Likewise.
3818 * spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
3819 * spu-multiarch.c (parse_spufs_run, spu_fetch_registers)
3820 (spu_store_registers): Likewise.
3821 * target.c (debug_print_register): Likewise.
3822 * tic6x-tdep.c (tic6x_get_longjmp_target): Likewise.
3823 * xstormy16-tdep.c (xstormy16_store_return_value)
3824 (xstormy16_push_dummy_call, xstormy16_resolve_jmp_table_entry)
3825 (xstormy16_find_jmp_table_entry): Likewise.
3827 2013-03-01 Jiong Wang <jiwang@tilera.com>
3829 * tilegx-tdep.c (tilegx_get_longjmp_target): New function.
3830 (tilegx_gdbarch_init): Install it.
3832 2013-02-28 Tom Tromey <tromey@redhat.com>
3834 * python/py-arch.c (archpy_disassemble): Use PyInt_Check and
3837 2013-02-28 Doug Evans <dje@google.com>
3839 * python/py-finishbreakpoint.c (bpfinishpy_init): gcc -Wall lint.
3840 * python/python.c (gdbpy_find_pc_line): Ditto.
3842 2013-02-28 Tom Tromey <tromey@redhat.com>
3844 * contrib/excheck.py: New file.
3845 * contrib/exsummary.py: New file.
3846 * contrib/gcc-with-excheck: New file.
3848 2013-02-28 Tom Tromey <tromey@redhat.com>
3850 * python/python.c (gdbpy_print_stack): Call begin_line and
3851 fprintf_filtered inside TRY_CATCH.
3853 2013-02-28 Tom Tromey <tromey@redhat.com>
3855 * python/python.c (gdbpy_find_pc_line): Call find_pc_line
3858 2013-02-28 Tom Tromey <tromey@redhat.com>
3860 * py-finishbreakpoint.c (bpfinishpy_init): Reorganize to call
3861 frame_object_to_frame_info inside TRY_CATCH.
3863 2013-02-28 Tom Tromey <tromey@redhat.com>
3865 * py-block.c (gdbpy_block_for_pc): Call block_for_pc inside
3868 2013-02-28 Tom Tromey <tromey@redhat.com>
3870 * objfiles.h (ALL_PSPACE_OBJFILES): Remove trailing backlash.
3872 2013-02-27 Corinna Vinschen <vinschen@redhat.com>
3874 * windows-nat.c: Throughout, fix format strings and casts of
3875 printf-like functions to avoid type related warnings on all
3877 (handle_output_debug_string): Fetch context information address
3878 from debug string using string_to_core_addr.
3880 2013-02-27 Jiong Wang <jiwang@tilera.com>
3882 * regformats/reg-tilegx.dat (name): Change abi name to "tilegx".
3883 * regformats/reg-tilegx32.dat: New.
3885 2013-02-27 Jiong Wang <jiwang@tilera.com>
3887 * configure.tgt (tilegx-*-linux*): Enable gdbserver.
3889 2013-02-27 Jiong Wang <jiwang@tilera.com>
3891 * configure.tgt (tilegx-*-linux*): Replace whitespace with tab.
3893 2013-02-27 Yao Qi <yao@codesourcery.com>
3894 Pedro Alves <palves@redhat.com>
3896 * tracepoint.c (tfile_trace_find): For tfind
3897 pc/tp/range/outside, look for the next trace frame instead of
3898 always starting from frame 0.
3900 2013-02-26 Anthony Green <green@moxielogic.com>
3902 * configure.tgt: Add support for moxie-*-rtems* target.
3904 2013-02-25 Pedro Alves <palves@redhat.com>
3906 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Change
3909 2013-02-24 Maciej W. Rozycki <macro@codesourcery.com>
3911 * mips-tdep.c (mips32_scan_prologue): Reset frame_offset to zero
3912 if $fp is used as the virtual frame pointer.
3914 2013-02-23 Alan Modra <amodra@gmail.com>
3916 * elfread.c (elf_symtab_read): Do not use udata.p here to find
3918 * ppc64-tdep.c (ppc64_elf_make_msymbol_special): New function.
3919 * ppc64-tdep.h (ppc64_elf_make_msymbol_special): Declare.
3920 * ppc-linux-tdep.c (ppc_linux_init_abi): Set up to use the above.
3921 * ppcfbsd-tdep.c (ppcfbsd_init_abi): Likewise.
3923 2013-02-22 Jan Kratochvil <jan.kratochvil@redhat.com>
3926 * elfread.c (build_id_bfd_get): Make the return type const.
3927 (build_id_verify): Make the check parameter const.
3928 (build_id_to_debug_filename): Make the build_id parameter and variable
3930 (find_separate_debug_file_by_buildid): Make the variable build_id const.
3932 2013-02-21 Alan Modra <amodra@gmail.com>
3934 * elfread.c (build_id_bfd_get): Adjust for elf_tdata changes.
3936 2013-02-20 Siva Chandra Reddy <sivachandra@google.com>
3938 Add a new method 'disassemble' to gdb.Architecture class.
3939 * python/py-arch.c (archpy_disassmble): Implementation of the
3940 new method gdb.Architecture.disassemble.
3941 (arch_object_methods): Add entry for the new method.
3943 2013-02-20 Jiong Wang <jiwang@tilera.com>
3945 * MAINTAINERS (Write After Approval): Add myself to the list.
3947 2013-02-19 Pedro Alves <palves@redhat.com>
3949 Garbage collect 'struct monitor_ops'::load_routine.
3951 * monitor.h (struct monitor_ops) <load_routine>: Remove field.
3952 * monitor.c (monitor_load): No longer call
3953 current_monitor->load_routine.
3954 * dbug-rom.c (init_dbug_cmds): Don't set 'load_routine'.
3955 * m32r-rom.c (init_m32r_cmds): Don't set 'load_routine'.
3956 * ppcbug-rom.c (init_ppc_cmds): Don't set 'load_routine'.
3958 2013-02-19 Pedro Alves <palves@redhat.com>
3962 Harmonize with generic_load.
3964 * monitor.c: Include "readline/readline.h".
3965 (monitor_load): Rename parameter 'file' to 'args'. Use build_argv
3966 instead of sscanf. Use CORE_ADDR/strtoulst instead of unsigned
3967 long/strtol for the 'load_offset' local. Error out if no argument
3968 is given or if too many arguments are given. Tilde expand the
3969 passed in file name.
3971 2013-02-19 Kai Tietz <ktietz@redhat.com>
3974 * symfile.c (load_section_data): Change type of load_offset
3976 (generic_load): User strtoulst instead of strtoul for conversion
3979 2013-02-19 Jiong Wang <jiwang@tilera.com>
3981 * tilegx-tdep.c (tilegx_analyze_prologue): add check for
3982 for return address, "lr" register, saved on stack.
3983 * tilegx-tdep.c (tilegx_frame_cache): update "PC" reg
3984 after we invoke tilegx_analyze_prologue.
3986 2013-02-19 Jiong Wang <jiwang@tilera.com>
3988 * tilegx-tdep.c (itilegx_gdbarch_init): char type should be signed.
3990 2013-02-19 Jiong Wang <jiwang@tilera.com>
3992 * tilegx-tdep.c (tilegx_skip_prologue): Use skip_prologue_using_sal.
3994 2013-02-19 Jiong Wang <jiwang@tilera.com>
3996 * tilegx-tdep.c (INT_SWINT_1_SIGRETURN): New macro.
3997 (tilegx_write_pc): New function.
3998 (tilegx_cannot_reference_register): Return zero if REGNO
3999 is TILEGX_FAULTNUM_REGNUM.
4000 (tilegx_gdbarch_init): Add call to set_gdbarch_write_pc.
4001 (tilegx_register_name): Add handling of "faultnum" register.
4002 * tilegx-tdep.h (enum tilegx_regnum): Add TILEGX_FAULTNUM_REGNUM.
4003 * tilegx-linux-tdep.c (tilegx_linux_supply_regset): Add
4004 handling of TILEGX_FAULTNUM_REGNUM.
4005 * tilegx-linux-nat.c (regmap): Add entry for TILEGX_FAULTNUM_REGNUM.
4007 2013-02-19 Jiong Wang <jiwang@tilera.com>
4009 * tilegx-tdep.c (tilegx_push_dummy_call): args pushed on stack
4010 should be aligned to 64bit.
4012 2013-02-19 Kai Tietz <ktietz@redhat.com>
4014 * windows-nat.c (windows_xfer_memory): Fix debug-output
4017 2013-02-19 Lei Liu <lei.liu2@windriver.com>
4019 * mips-linux-nat.c (mips64_linux_regsets_store_registers):
4020 Don't check DSP register number if HAVE_DSP is not set.
4022 2013-02-19 Alan Modra <amodra@gmail.com>
4024 * elfread.c (struct build_id): Delete. Use struct elf_build_id
4025 throughout file instead.
4026 (build_id_bfd_get): Update to use new elf_tdata build_id field.
4027 Don't xmalloc return value.
4028 (build_id_verify): Similarly. Don't xfree.
4029 (build_id_to_debug_filename): Update.
4030 (find_separate_debug_file_by_buildid): Update, don't xfree.
4032 2013-02-18 Tom Tromey <tromey@redhat.com>
4035 * dwarf2read.c (read_subrange_type): Use result of
4038 2013-02-16 Yuanhui Zhang <asmwarrior@gmail.com>
4040 * frame.c: Remove one extra white space after #include
4043 2013-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
4045 * contrib/cc-with-tweaks.sh: Extend the comment for -p option.
4047 2013-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
4049 * gdb-gdb.gdb.in: Wrap set complaints, b internal_error, b info_command
4050 and dir commands into an if block.
4052 2013-02-15 Sanimir Agovic <sanimir.agovic@intel.com>
4054 * python/py-breakpoint (struct pybp_code): Use int instead of
4057 2013-02-15 Pedro Alves <pedro@codesourcery.com>
4058 Hafiz Abid Qadeer <abidh@codesourcery.com>
4060 * NEWS: Mention new field "trace-file".
4061 * tracepoint.c (trace_status_mi): Output "trace-file" field.
4062 (tfile_open): Record the trace file's filename in the trace
4064 (tfile_files_info): Mention the name of the trace file.
4065 Check the "filename" field explicitely.
4066 (trace_status_command): Explicitely check "filename" field.
4067 (trace_find_command): Ditto.
4068 (trace_find_pc_command): Ditto.
4069 (trace_find_tracepoint_command): Ditto.
4070 (trace_find_line_command): Ditto.
4071 (trace_find_range_command): Ditto.
4072 (trace_find_outside_command): Ditto.
4073 * tracepoint.h (struct trace_status) <from_file>: Rename it
4074 to "filename" and make it hold the trace file's filename
4075 instead of a boolean.
4076 * remote.c (remote_get_trace_status): Initialize "filename"
4077 field with NULL instead of 0.
4079 2013-02-15 Yao Qi <yao@codesourcery.com>
4081 * remote.c: Fix a typo.
4083 2013-02-14 Pierre Muller <muller@sourceware.org>
4085 * contrib/ari/gdb_ari.sh (GNU/Linux rule): Remove.
4087 2013-02-14 Pedro Alves <palves@redhat.com>
4089 * utils.c (savestring): Don't #undef it. Move function to
4090 common/common-utils.c.
4091 * common/common-utils.c: Include gdb_string.h.
4092 (savestring): Move here from utils.c.
4093 * common/common-utils.h (savestring): Declare.
4095 2013-02-14 Pedro Alves <palves@redhat.com>
4097 * utils.c (savestring): Rename parameter 'size' to 'len'.
4099 2013-02-14 Pedro Alves <palves@redhat.com>
4100 Yufeng Zhang <yufeng.zhang@arm.com>
4102 * aarch64-linux-nat.c (aarch64_init_debug_reg_state): Delete.
4103 (aarch64_inferior_data, struct aarch64_inferior_data):
4105 (struct aarch64_process_info): New.
4106 (aarch64_process_list): New global.
4107 (aarch64_find_process_pid, aarch64_add_process)
4108 (aarch64_process_info_get): New functions.
4109 (aarch64_inferior_data_get): Delete.
4110 (aarch64_process_info_get): New function.
4111 (aarch64_forget_process): New function.
4112 (aarch64_get_debug_reg_state): New parameter 'pid'. Reimplement.
4113 (aarch64_linux_prepare_to_resume): Pass the lwp's pid to
4114 aarch64_get_debug_reg_state.
4115 (aarch64_notify_debug_reg_change): Use iterate_over_lwps
4116 instead of linux_nat_iterate_watchpoint_lwps.
4117 (aarch64_linux_new_fork): New function.
4118 (aarch64_linux_child_post_startup_inferior): Use
4119 aarch64_forget_process instead of aarch64_init_debug_reg_state.
4120 (aarch64_handle_breakpoint, aarch64_linux_insert_hw_breakpoint)
4121 (aarch64_linux_remove_hw_breakpoint)
4122 (aarch64_handle_aligned_watchpoint)
4123 (aarch64_handle_unaligned_watchpoint)
4124 (aarch64_linux_insert_watchpoint)
4125 (aarch64_linux_remove_watchpoint)
4126 (aarch64_linux_stopped_data_address): Adjust to pass the current
4127 process id to aarch64_debug_reg_state.
4128 (_initialize_aarch64_linux_nat): Install aarch64_linux_new_fork as
4129 linux_nat_new_fork hook, and aarch64_forget_process as
4130 linux_nat_forget_process hook; remove the call to
4131 register_inferior_data_with_cleanup.
4133 2013-02-14 Pedro Alves <palves@redhat.com>
4135 * eval.c (evaluate_subexp_for_address) <default_case_after_eval,
4136 EVAL_AVOID_SIDE_EFFECTS>: Swap and handle TYPE_CODE_REF before
4139 2013-02-14 Pedro Alves <pedro@codesourcery.com>
4140 Hafiz Abid Qadeer <abidh@codesourcery.com>
4142 * tracepoint.h (validate_trace_state_variable_name): Declare.
4143 * tracepoint.c (validate_trace_state_variable_name): New.
4144 (trace_variable_command): Parse the trace state variable's name
4145 without using parse_expression. Do several validations.
4146 * mi/mi-main.c (mi_cmd_trace_define_variable): Don't parse the
4147 trace state variable's name with parse_expression. Validate it.
4149 2013-02-14 Yao Qi <yao@codesourcery.com>
4151 * infcmd.c (breakpoint_proceeded): Remove it.
4153 2013-02-14 Yao Qi <yao@codesourcery.com>
4155 * tracepoint.c (end_actions_pseudocommand): Make it static.
4156 (while_stepping_pseudocommand): Likewise.
4157 * tracepoint.h (end_actions_pseudocommand): Remove the
4159 (while_stepping_pseudocommand): Likewise.
4161 2013-02-14 Yao Qi <yao@codesourcery.com>
4163 * cli/cli-decode.c (help_cmd): Remove the declaration of
4165 (help_all): Likewise.
4167 2013-02-13 Pedro Alves <palves@redhat.com>
4169 * amd64-linux-nat.c (update_debug_registers_callback):
4171 (amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use
4173 (amd64_linux_prepare_to_resume): Pass the lwp's pid to
4174 i386_debug_reg_state.
4175 (amd64_linux_new_fork): New function.
4176 (_initialize_amd64_linux_nat): Install amd64_linux_new_fork as
4177 linux_nat_new_fork hook, and i386_forget_process as
4178 linux_nat_forget_process hook.
4179 * i386-linux-nat.c (update_debug_registers_callback):
4181 (i386_linux_dr_set_control, i386_linux_dr_set_addr): Use
4183 (i386_linux_prepare_to_resume): Pass the lwp's pid to
4184 i386_debug_reg_state.
4185 (i386_linux_new_fork): New function.
4186 (_initialize_i386_linux_nat): Install i386_linux_new_fork as
4187 linux_nat_new_fork hook, and i386_forget_process as
4188 linux_nat_forget_process hook.
4189 * i386-nat.c (i386_init_dregs): Delete.
4190 (i386_inferior_data, struct i386_inferior_data):
4192 (struct i386_process_info): New.
4193 (i386_process_list): New global.
4194 (i386_find_process_pid, i386_add_process, i386_process_info_get):
4196 (i386_inferior_data_get): Delete.
4197 (i386_process_info_get): New function.
4198 (i386_debug_reg_state): New parameter 'pid'. Reimplement.
4199 (i386_forget_process): New function.
4200 (i386_cleanup_dregs): Rewrite.
4201 (i386_update_inferior_debug_regs, i386_insert_watchpoint)
4202 (i386_remove_watchpoint, i386_region_ok_for_watchpoint)
4203 (i386_stopped_data_address, i386_insert_hw_breakpoint)
4204 (i386_remove_hw_breakpoint): Adjust to pass the current process id
4205 to i386_debug_reg_state.
4206 (i386_use_watchpoints): Don't register inferior data.
4207 * i386-nat.h (i386_debug_reg_state): Add new 'pid' parameter, and
4209 (i386_forget_process): Declare.
4210 * linux-fork.c (delete_fork): Call linux_nat_forget_process.
4211 * linux-nat.c (linux_nat_new_fork, linux_nat_forget_process_hook):
4213 (linux_child_follow_fork): Don't call linux_nat_new_thread here.
4214 (add_initial_lwp): New, factored out from ...
4215 (add_lwp): ... this. Don't check the number of lwps before
4216 calling linux_nat_new_thread.
4217 (linux_nat_iterate_watchpoint_lwps): Delete.
4218 (linux_nat_attach): Use add_initial_lwp instead of add_lwp.
4219 (linux_handle_extended_wait): Call the linux_nat_new_fork hook on
4221 (linux_nat_wait_1): Use add_initial_lwp instead of add_lwp for the
4223 (linux_nat_kill, linux_nat_mourn_inferior): Call
4224 linux_nat_forget_process.
4225 (linux_nat_set_new_fork, linux_nat_set_forget_process)
4226 (linux_nat_forget_process): New functions.
4227 * linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): Delete
4229 (linux_nat_iterate_watchpoint_lwps): Delete declaration.
4230 (linux_nat_new_fork_ftype, linux_nat_forget_process_ftype): New
4232 (linux_nat_set_new_fork, linux_nat_set_forget_process)
4233 (linux_nat_forget_process): New declarations.
4235 * amd64fbsd-nat.c (super_mourn_inferior): New global.
4236 (amd64fbsd_mourn_inferior): New function.
4237 (_initialize_amd64fbsd_nat): Override to_mourn_inferior.
4238 * windows-nat.c (windows_detach): Call i386_cleanup_dregs.
4240 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
4242 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity):
4245 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
4247 * aarch64-linux-nat.c (debug_reg_change_callback)
4248 (aarch64_linux_get_debug_reg_capacity): ARI fix: Replace %llx with
4251 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
4253 * aarch64-linux-nat.c (dr_changed_t): ARI fix: Replace long long
4256 2013-02-13 Pedro Alves <palves@redhat.com>
4257 Hafiz Abid Qadeer <abidh@codesourcery.com>
4259 * c-lang.c (c_op_print_tab): Add entry for UNOP_PLUS.
4261 2013-02-12 Tom Tromey <tromey@redhat.com>
4264 * c-exp.y (lex_one_token): Initialize other fields of yylval on
4266 (classify_inner_name): Remove 'first_name' argument, add
4267 'context'. Remove unused variable.
4268 (yylex): Explicitly maintain the context type. Exit loop earlier
4269 if NAME result is seen.
4271 2013-02-12 Pedro Alves <palves@redhat.com>
4273 * amd64-darwin-tdep.c: Add (C) after Copyright.
4274 * cli/cli-cmds.h: Ditto.
4275 * cli/cli-decode.c: Ditto.
4276 * cli/cli-decode.h: Ditto.
4277 * cli/cli-dump.c: Ditto.
4278 * cli/cli-dump.h: Ditto.
4279 * cli/cli-interp.c: Ditto.
4280 * cli/cli-logging.c: Ditto.
4281 * cli/cli-script.c: Ditto.
4282 * cli/cli-script.h: Ditto.
4283 * cli/cli-setshow.c: Ditto.
4284 * cli/cli-setshow.h: Ditto.
4285 * cli/cli-utils.c: Ditto.
4286 * cli/cli-utils.h: Ditto.
4287 * config/alpha/nm-osf3.h: Ditto.
4288 * config/djgpp/djconfig.sh: Ditto.
4289 * config/i386/nm-fbsd.h: Ditto.
4290 * config/i386/nm-i386gnu.h: Ditto.
4291 * config/nm-linux.h: Ditto.
4292 * config/nm-nto.h: Ditto.
4293 * config/rs6000/nm-rs6000.h: Ditto.
4294 * config/sparc/nm-sol2.h: Ditto.
4295 * darwin-nat-info.c: Ditto.
4298 * gdb-demangle.h: Ditto.
4299 * i386-darwin-nat.c: Ditto.
4300 * i386-darwin-tdep.c: Ditto.
4301 * linux-fork.h: Ditto.
4302 * m32c-tdep.c: Ditto.
4303 * microblaze-linux-tdep.c: Ditto.
4304 * microblaze-rom.c: Ditto.
4305 * microblaze-tdep.c: Ditto.
4306 * microblaze-tdep.h: Ditto.
4307 * mips-linux-tdep.h: Ditto.
4308 * ppc-ravenscar-thread.c: Ditto.
4309 * ppc-ravenscar-thread.h: Ditto.
4310 * prologue-value.c: Ditto.
4311 * prologue-value.h: Ditto.
4312 * ravenscar-thread.c: Ditto.
4313 * ravenscar-thread.h: Ditto.
4314 * sparc-ravenscar-thread.c: Ditto.
4315 * sparc-ravenscar-thread.h: Ditto.
4316 * tilegx-linux-tdep.c: Ditto.
4317 * unwind_stop_reasons.def: Ditto.
4318 * windows-nat.h: Ditto.
4319 * xtensa-linux-tdep.c: Ditto.
4320 * xtensa-xtregs.c: Ditto.
4321 * regformats/regdat.sh: Ditto.
4322 * regformats/regdef.h: Ditto.
4324 2013-02-12 Pedro Alves <palves@redhat.com>
4326 * break-catch-sig.c: Update copyright years.
4328 2013-02-11 Siva Chandra Reddy <sivachandra@google.com>
4330 Add support for a destructor for ui_out data and use it to
4331 provide a ui_out destructor.
4332 * ui-out.h: Declare the new ui_out destructor.
4333 (ui_out_impl): Add a field for data destructor in ui_out_impl.
4334 * ui-out.c (default_data_destroy): Add a default data destructor
4336 (default_ui_out_impl): Set the new data_destroy field to
4337 default_data_destroy
4338 (uo_data_destroy): Local function which invokes the data
4339 destructor if present.
4340 (clear_table): Local function which clears the table data of a
4342 (ui_out_destroy): Public function which frees a ui_out object.
4343 (ui_out_table_end): Use the new clear_table function.
4344 * cli-out.c (cli_ui_out_impl): Set the new data_destroy field to
4346 * mi/mi-out.c (mi_ui_out_impl): Set the new data_destroy field
4349 2013-02-11 Doug Evans <dje@google.com>
4351 * printcmd.c (printf_c_string,printf_wide_c_string): New functions.
4352 (printf_decfloat): New function. Broken out from ui_printf.
4353 Remove unnecessary code to shift the entire format string down.
4354 (printf_pointer): New function.
4355 (ui_printf): Code to print C strings, wide C strings, decfloats,
4356 and pointers moved to separate functions.
4358 2013-02-11 Sergio Durigan Junior <sergiodj@redhat.com>
4360 * valops.c (value_assign): Handling bitfield offset in
4361 `lval_internalvar_component' case.
4363 2013-02-08 Doug Evans <dje@google.com>
4365 * common/format.c (parse_format_string): Fix whitespace.
4367 2013-02-08 Matthew Gretton-Dann <matthew.gretton-dann@linaro.org>
4369 * stack.c (return_command): Work around uninitialized variable
4372 2013-02-08 Yufeng Zhang <yufeng.zhang@arm.com>
4374 * aarch64-linux-tdep.c (AARCH64_LINUX_SIZEOF_GREGSET): Change the
4375 number of the registers from 36 to 34.
4377 2013-02-08 Marcus Shawcroft <marcus.shawcroft@arm.com>
4379 * NEWS: Mention new AArch64 native and target support.
4381 2013-02-08 Marcus Shawcroft <marcus.shawcroft@arm.com>
4383 * MAINTAINERS (Write After Approval): Add myself.
4385 2013-02-08 Jim MacArthur <jim.macarthur@arm.com>
4386 Marcus Shawcroft <marcus.shawcroft@arm.com>
4387 Nigel Stephens <nigel.stephens@arm.com>
4388 Yufeng Zhang <yufeng.zhang@arm.com>
4390 * aarch64-linux-nat.c: New file.
4391 * config/aarch64/linux.mh: New file.
4392 * configure.host: Add AArch64.
4393 * Makefile.in (ALLDEPFILES): Add aarch64-linux-nat.c.
4395 2013-02-07 Doug Evans <dje@google.com>
4397 * cli/cli-cmds.c (_initialize_cli_cmds): Clarify argument to
4398 disassemble command.
4400 2013-02-07 Marcus Shawcroft <marcus.shawcroft@arm.com>
4402 * aarch64-linux-tdep.c (aarch64_linux_init_abi): Call
4403 set_gdbarch_fetch_tls_load_module_address.
4405 2013-02-06 David S. Miller <davem@davemloft.net>
4407 * sparc-tdep.c (sparc32_return_value): Handle writing return value when
4408 using RETURN_VALUE_ABI_PRESERVES_ADDRESS.
4409 * value.c (struct_return_convention): New function.
4410 (using_struct_return): Implement in terms of struct_return_convention.
4411 * value.h (struct_return_convention): Declare.
4412 * stack.c (return_command): Allow successful overriding of the return
4413 value when RETURN_VALUE_ABI_PRESERVES_ADDRESS.
4415 2013-02-06 Tom Tromey <tromey@redhat.com>
4417 * python/py-type.c (typy_strip_typedefs): Don't call check_typedef
4418 outside of TRY_CATCH.
4420 2013-02-06 Yao Qi <yao@codesourcery.com>
4422 * mi/mi-interp.c: Include "tracepoint.h".
4423 (mi_tsv_modified): Declare.
4424 (mi_tsv_created, mi_tsv_deleted): Update declaration.
4425 (mi_interpreter_init): Call observer_attach_tsv_modified.
4426 (mi_tsv_modified): New.
4427 (mi_tsv_created, mi_tsv_deleted): Update.
4428 * tracepoint.c (trace_variable_command): Call
4429 observer_notify_tsv_modified if the initial value of tsv is
4431 (delete_trace_state_variable): Call
4432 observer_notify_tsv_deleted earlier.
4433 (trace_variable_command): Caller update.
4434 (create_tsv_from_upload): Likewise.
4435 * observer.sh: Declare "struct trace_state_variable".
4437 * NEWS: Mention the new MI notification "=tsv-modified".
4439 2013-02-05 Doug Evans <dje@google.com>
4441 * completer.c (location_completer): Fix typo in comment.
4443 2013-02-05 Jan Kratochvil <jan.kratochvil@redhat.com>
4445 * breakpoint.c (add_location_to_breakpoint): Insert the location with
4448 2013-02-05 Marcus Shawcroft <marcus.shawcroft@arm.com>
4450 * aarch64-tdep.c (aarch64_analyze_prologue): ARI fix:
4451 Refactor if statement to avoid trailing || operator.
4453 2013-02-05 Andreas Tobler <andreast@fgznet.ch>
4455 * NEWS: Add PowerPC FreeBSD as a new native configuration.
4457 2013-02-04 Andreas Tobler <andreast@fgznet.ch>
4459 * Makefile.in (ALL_TARGET_OBS): Add powerpc FreeBSD files.
4460 * configure.host: Add powerpc*-*-freebsd* target.
4461 * configure.tgt: Add target info for powerpc*-*-freebsd*.
4462 * ppcfbsd-nat.c, ppcfbsd-tdep.h, ppcfbsd-tdep.c: New files.
4463 * config/powerpc/fbsd.mh: New file.
4465 2013-02-04 Sergio Durigan Junior <sergiodj@redhat.com>
4466 Denys Vlasenko <dvlasenk@redhat.com>
4467 Pedro Alves <palves@redhat.com>
4469 * gdbarch.sh (elfcore_write_linux_prpsinfo): New F hook.
4470 (struct elf_internal_linux_prpsinfo): Forward declare.
4471 * gdbarch.h, gdbarch.c: Regenerate.
4472 * linux-tdep.c: Include `cli/cli-utils.h'.
4473 (linux_fill_prpsinfo): New function.
4474 (linux_make_corefile_notes): Use linux_fill_prpsinfo. If there's
4475 an elfcore_write_linux_prpsinfo hook, use it, otherwise, use
4476 elfcore_write_linux_prpsinfo32 or elfcore_write_linux_prpsinfo64
4477 depending on gdbarch pointer bitness.
4478 * ppc-linux-tdep.c: Include elf-bfd.h.
4479 (ppc_linux_init_abi): Hook in elfcore_write_ppc_linux_prpsinfo32
4482 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
4483 Marcus Shawcroft <marcus.shawcroft@arm.com>
4484 Nigel Stephens <nigel.stephens@arm.com>
4485 Yufeng Zhang <yufeng.zhang@arm.com>
4487 * configure.tgt (aarch64*-*-linux*): Set build_gdbserver=yes.
4489 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
4490 Marcus Shawcroft <marcus.shawcroft@arm.com>
4491 Nigel Stephens <nigel.stephens@arm.com>
4492 Yufeng Zhang <yufeng.zhang@arm.com>
4494 * aarch64-newlib-tdep.c: New file.
4495 * configure.tgt: Add aarch64-newlib-tdep.o to gdb_target_obs of
4497 * defs.h (enum gdb_osabi): Add GDB_OSABI_NEWLIB.
4498 * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-newlib-tdep.o.
4499 (ALLDEPFILES): Add aarch64-newlib-tdep.c.
4500 * osabi.c (gdb_osabi_names): Add "Newlib".
4502 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
4503 Marcus Shawcroft <marcus.shawcroft@arm.com>
4504 Nigel Stephens <nigel.stephens@arm.com>
4505 Yufeng Zhang <yufeng.zhang@arm.com>
4507 * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-linux-tdep.o.
4508 (ALLDEPFILES): Add aarch64-linux-tdep.c.
4509 * aarch64-linux-tdep.c: New file.
4510 * aarch64-linux-tdep.h: New file.
4511 * aarch64-tdep.h (gdbarch_tdep): Define gregset and fpregset.
4512 * configure.tgt: Add aarch64-none-linux-gnu.
4514 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
4515 Marcus Shawcroft <marcus.shawcroft@arm.com>
4516 Nigel Stephens <nigel.stephens@arm.com>
4517 Yufeng Zhang <yufeng.zhang@arm.com>
4519 * Makefile.in (ALL_64_TARGET_OBS): Add arch64-tdep.o.
4520 (HFILES_NO_SRCDIR): Add aarch64-tdep.h.
4521 (ALLDEPFILES): Add aarch64-tdep.c.
4522 * aarch64-tdep.c: New file.
4523 * aarch64-tdep.h: New file.
4524 * configure.tgt: Add AArch64.
4525 * features/Makefile (WHICH): Add aarch64 and aarch64-without-fpu.
4526 (aarch64-expedite): New definition.
4527 * features/aarch64-core.xml: New file.
4528 * features/aarch64-fpu.xml: New file.
4529 * features/aarch64-without-fpu.c: New file (generated).
4530 * features/aarch64-without-fpu.xml: New file.
4531 * features/aarch64.c: New file (generated).
4532 * features/aarch64.xml: New file.
4533 * regformats/aarch64-without-fpu.dat: New file (generated).
4534 * regformats/aarch64.dat: New file (generated).
4536 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
4538 * contrib/expect-read1.c: New file.
4539 * contrib/expect-read1.sh: New file.
4541 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
4543 * dwarf2read.c (file_file_name): New function with code from
4545 (file_full_name): Move most of the code to file_file_name.
4546 (macro_start_file): Rename variable full_name to file_name and use
4547 file_file_name for it. Add comp_dir parameter to new_macro_table.
4548 * macrocmd.c (show_pp_source_pos): New variable fullname. Replace any
4549 macro_source_file->filename access by macro_source_fullname call.
4550 * macroscope.c (_initialize_macroscope): Update the new_macro_table
4552 * macrotab.c (struct macro_table): New field comp_dir.
4553 (macro_include): New variables link_fullname and source_fullname.
4554 Replace any macro_source_file->filename access by macro_source_fullname
4556 (macro_lookup_inclusion): Remove the partial filenames checking code.
4557 (check_for_redefinition): New variables source_fullname and
4558 found_key_fullname. Replace any macro_source_file->filename access by
4559 macro_source_fullname call.
4560 (macro_undef): New variables source_fullname and key_fullname. Replace
4561 any macro_source_file->filename access by macro_source_fullname call.
4562 (macro_lookup_definition): New variables retval and source_fullname.
4563 Replace any macro_source_file->filename access by macro_source_fullname
4565 (foreach_macro): New variable key_fullname. Replace any
4566 macro_source_file->filename access by macro_source_fullname call.
4567 (foreach_macro_in_scope): New variable datum_fullname. Replace any
4568 macro_source_file->filename access by macro_source_fullname call.
4569 (new_macro_table): Add parameter comp_dir. Initialize T with it.
4570 (macro_source_fullname): New function.
4571 * macrotab.h (struct macro_source_file): Extent the filename field
4573 (new_macro_table): New parameter comp_dir, add a comment for it.
4574 (macro_source_fullname): new declaration.
4576 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
4578 * dwarf2read.c (dw2_map_symtabs_matching_filename): Move variable
4579 this_real_name to outer block. Use it also for
4580 compare_filenames_for_search.
4581 (dw2_expand_symtabs_matching): New variable this_real_name. Use it
4582 with dw2_get_real_path for file_matcher, considering also
4583 BASENAMES_MAY_DIFFER.
4584 (file_full_name): Prepend COMP_DIR even for relative lh->INCLUDE_DIRS.
4586 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
4588 * dwarf2read.c (dw2_expand_symtabs_matching): Add basenames parameter
4589 to the file_matcher parameter. Pass 0 to it.
4590 (dwarf2_create_include_psymtab): Copy also DIRNAME.
4591 * psymtab.c (partial_map_symtabs_matching_filename): Drop handling of
4592 NULL psymtab_to_fullname result.
4593 (psymtab_to_fullname): Remove variable r. Never return NULL, assemble
4594 an expected filename instead.
4595 (expand_symtabs_matching_via_partial): Add basenames parameter to the
4596 file_matcher parameter. Call also psymtab_to_fullname, after newly
4597 considering BASENAMES_MAY_DIFFER.
4598 * source.c (rewrite_source_path): Remove static.
4599 * source.h (rewrite_source_path): New declaration.
4600 * symfile.h (struct quick_symbol_functions): Add basenames parameter to
4601 the expand_symtabs_matching field. Comment it.
4602 * symtab.c (file_matches): New function comment. Add parameter
4603 basenames, implement it.
4604 (search_symbols_file_matches): Add basenames parameter. Update the
4605 file_matches caller.
4606 (search_symbols): Match FILES also against symtab_to_fullname.
4607 Optimize it for BASENAMES_MAY_DIFFER.
4609 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
4611 * source.c (print_source_lines_base): Print for TUI also "fullname".
4612 * tui/tui-data.c (init_content_element): Change tui_locator_element
4614 * tui/tui-data.h (struct tui_locator_element): Likewise.
4615 * tui/tui-disasm.c (tui_show_disassem_and_update_source): Rename
4616 tui_update_locator_filename calls to tui_update_locator_fullname.
4617 Replace symtab->filename refererence by symtab_to_fullname call.
4618 * tui/tui-out.c (tui_field_string): Check for "fullname" now.
4619 * tui/tui-source.c (tui_set_source_content): Change tui_locator_element
4620 field to full_name. Replace symtab->filename refererence by
4621 symtab_to_fullname call.
4622 (tui_show_symtab_source): Rename parameter to fullname. Change
4623 tui_locator_element field to full_name.
4624 * tui/tui-stack.c: Include source.h.
4625 (tui_set_locator_filename): Rename the declaration to ...
4626 (tui_set_locator_fullname): ... here. Rename its parameter to
4627 fullname, updates its comment.
4628 (tui_set_locator_info): Rename its parameter to fullname.
4629 (tui_set_locator_filename): Rename the definition to ...
4630 (tui_set_locator_fullname): ... here. Rename its parameter to
4631 fullname, updates its comment. Change tui_locator_element field to
4633 (tui_set_locator_info): Rename its parameter to fullname.
4634 (tui_set_locator_info): Rename callee to tui_set_locator_fullname.
4635 (tui_update_locator_filename): Rename to ...
4636 (tui_update_locator_fullname): ... here. Rename callee to
4637 tui_set_locator_fullname.
4638 (tui_show_frame_info): Replace symtab->filename refererence by
4639 symtab_to_fullname call.
4640 * tui/tui-stack.h (tui_update_locator_filename): Rename to ...
4641 (tui_update_locator_fullname): ... here.
4642 * tui/tui-winsource.c (tui_display_main): Rename the callee to
4643 tui_update_locator_fullname. Replace symtab->filename refererence by
4644 symtab_to_fullname call.
4645 * tui/tui.c (tui_show_source): Rename its parameter to fullname.
4646 Rename the callee to tui_update_locator_fullname.
4647 * tui/tui.h (tui_show_source): Rename its parameter to fullname.
4649 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
4651 * ada-lang.c (user_select_syms): Replace symtab->filename refererences
4652 by symtab_to_filename_for_display calls.
4653 * breakpoint.c (print_breakpoint_location, resolve_sal_pc): Likewise.
4654 (clear_command): New variable sal_fullname, initialize it. Replace
4655 compare_filenames_for_search by filename_cmp with sal_fullname.
4656 (say_where, update_static_tracepoint): Replace symtab->filename
4657 refererences by symtab_to_filename_for_display calls.
4658 * cli/cli-cmds.c (edit_command, list_command, ambiguous_line_spec):
4660 * dwarf2read.c: Include source.h.
4661 (fixup_go_packaging): Replace symtab->filename refererences by
4662 symtab_to_filename_for_display calls.
4663 * linespec.c (add_sal_to_sals): Rename variable filename to fullname.
4664 Replace symtab->filename refererences by symtab_to_filename_for_display
4666 (create_sals_line_offset, convert_linespec_to_sals): New variable
4667 fullname, initialize it, replace symtab->filename reference by the
4669 * linux-fork.c: Include source.h.
4670 (info_checkpoints_command): Replace symtab->filename refererences by
4671 symtab_to_filename_for_display calls.
4672 * macroscope.c (sal_macro_scope): Replace symtab->filename refererences
4673 by symtab_to_filename_for_display calls.
4674 * mdebugread.c: Include source.h.
4675 (psymtab_to_symtab_1): Replace symtab->filename refererences by
4676 symtab_to_filename_for_display calls.
4677 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
4678 (mi_cmd_file_list_exec_source_files): Likewise.
4679 * printcmd.c: Include source.h.
4680 (build_address_symbolic): Replace symtab->filename refererences by
4681 symtab_to_filename_for_display calls.
4682 * psymtab.c (partial_map_symtabs_matching_filename)
4683 (read_psymtabs_with_fullname): Call compare_filenames_for_search also
4684 with psymtab_to_fullname.
4685 * python/py-symtab.c (stpy_str): Replace symtab->filename refererences
4686 by symtab_to_filename_for_display calls.
4687 (stpy_get_filename): New variable filename, initialize it, use instead
4688 of symtab->filename refererences.
4689 (salpy_str): Make variable filename const char *. Replace
4690 symtab->filename refererences by symtab_to_filename_for_display calls.
4691 * skip.c: Include source.h and filenames.h.
4692 (skip_file_command): Remove const from the symtab variable. Replace
4693 symtab->filename refererences by symtab_to_fullname call.
4694 (function_name_is_marked_for_skip): New variables searched_for_fullname
4695 and fullname. Use them to search also with symtab's fullname.
4696 * source.c (find_source_lines): Replace symtab->filename refererences
4697 by symtab_to_filename_for_display calls.
4698 (print_source_lines_base): New variable filename, use it instead of
4699 symtab->filename. Replace symtab->filename refererences by
4700 symtab_to_filename_for_display calls.
4701 (line_info, forward_search_command): Replace symtab->filename
4702 refererences by symtab_to_filename_for_display calls.
4703 (reverse_search_command): Replace symtab->filename refererences by
4704 symtab_to_filename_for_display calls. New variable filename for it.
4705 * stack.c (frame_info): Likewise.
4706 * symmisc.c: Include source.h.
4707 (dump_objfile, dump_symtab_1, maintenance_print_symbols)
4708 (maintenance_info_symtabs): Replace symtab->filename refererences by
4709 symtab_to_filename_for_display calls.
4710 * symtab.c (iterate_over_some_symtabs): Call
4711 compare_filenames_for_search also with symtab_to_fullname.
4712 (lookup_symbol_aux_quick, basic_lookup_transparent_type_quick): Replace
4713 symtab->filename refererences by symtab_to_filename_for_display calls.
4714 (find_line_symtab): Replace symtab->filename refererences by
4715 symtab_to_filename_for_display calls.
4716 (file_matches): Replace filename_cmp by compare_filenames_for_search.
4717 (print_symbol_info): Make the last parameter const char *. New
4718 variable s_filename. Use it in the function.
4719 (symtab_symbol_info): Make the last_filename variable const char *.
4720 Replace symtab->filename refererences by symtab_to_filename_for_display
4722 (rbreak_command): New variable fullname. Use it. Replace
4723 symtab->filename refererence by symtab_to_filename_for_display call.
4724 * tracepoint.c (set_traceframe_context, trace_find_line_command)
4725 (print_one_static_tracepoint_marker): Replace symtab->filename
4726 refererences by symtab_to_filename_for_display calls.
4727 * tui/tui-source.c (tui_set_source_content): New variables filename and
4728 s_filename. Replace symtab->filename refererences by this variable.
4729 Replace other symtab->filename refererences by
4730 symtab_to_filename_for_display calls.
4732 2013-02-03 Eldar Gaynetdinov <hal9000ed2k@gmail.com>
4733 Jan Kratochvil <jan.kratochvil@redhat.com>
4735 Add a new variable that controls a way in which filenames are
4737 * NEWS (set filename-display): New entry.
4738 * source.c (filename_display_basename, filename_display_relative)
4739 (filename_display_absolute, filename_display_kind_names)
4740 (filename_display_string, show_filename_display_string)
4741 (symtab_to_filename_for_display): New.
4742 (_initialize_source): Added initialization of 'filename-display'
4744 * source.h (symtab_to_filename_for_display): Added declaration.
4745 * stack.c (print_frame): Added new variable and calling of a new
4746 function and condition with this variable. Changed third argument of
4747 calling of a function.
4749 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
4751 * tui/tui-data.c (init_win_info, tui_del_window, tui_free_window):
4752 Rename field reference filename to fullname.
4753 * tui/tui-data.h (struct tui_source_info): Rename field filename to
4754 fullname. New comment for it.
4755 * tui/tui-source.c (tui_set_source_content): Rename field reference
4756 filename to fullname. Initialize field by symtab_to_fullname now.
4757 * tui/tui-winsource.c (tui_update_breakpoint_info): Rename field
4758 reference filename to fullname. Use symtab_to_fullname during
4761 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
4764 * dwarf2read.c (dw2_expand_symtabs_with_filename): Rename to ...
4765 (dw2_expand_symtabs_with_fullname): ... here. Rename parameter
4766 filename to fullname. Rename variable this_name to this_fullname.
4767 Lowercase FILENAME_CMP call.
4768 (dw2_find_symbol_file): New comment for the returned string.
4769 (dwarf2_gdb_index_functions): Rename the function to
4770 dw2_expand_symtabs_with_fullname.
4771 * psymtab.c (read_psymtabs_with_filename): Rename to ...
4772 (read_psymtabs_with_fullname): ... here. Rename parameter filename to
4774 (psym_functions): Rename the function to read_psymtabs_with_fullname.
4775 * symfile.h (struct quick_symbol_functions): Rename field
4776 expand_symtabs_with_filename to expand_symtabs_with_fullname and its
4777 parameter filename to fullname. Document returned string meaning for
4779 * symtab.c (find_line_symtab): Rename the called function to
4780 expand_symtabs_with_fullname.
4782 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
4785 * breakpoint.c (clear_command): Remove variable is_abs, unify the
4786 call of filename_cmp with compare_filenames_for_search.
4787 * dwarf2read.c (dw2_map_symtabs_matching_filename): Remove variable
4788 is_abs, unify the call of FILENAME_CMP with
4789 compare_filenames_for_search. New gdb_asserts for real_path and name.
4790 Unify the call of compare_filenames_for_search with FILENAME_CMP.
4791 * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
4792 * symfile.h (struct quick_symbol_functions): Extend the comment for
4793 map_symtabs_matching_filename.
4794 * symtab.c (compare_filenames_for_search): Remove the function comment
4795 relative path requirement. Handle absolute filenames, with a comment.
4796 (iterate_over_some_symtabs): Remove variable is_abs, unify the call of
4797 FILENAME_CMP with compare_filenames_for_search. New gdb_asserts for
4798 real_path and name. Unify the call of compare_filenames_for_search
4800 (iterate_over_symtabs): New gdb_assert on REAL_PATH.
4802 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
4805 * breakpoint.c (print_breakpoint_location): Replace bp_location field
4806 source_file references by symtab field references. Remove variables
4808 (momentary_breakpoint_from_master, add_location_to_breakpoint):
4809 (clear_command, say_where): Replace bp_location field source_file
4810 references by symtab field references.
4811 (bp_location_dtor): Remove the source_file reference.
4812 (update_static_tracepoint): Replace bp_location field source_file
4813 references by symtab field references.
4814 (breakpoint_free_objfile): New function.
4815 * breakpoint.h (struct bp_location): Extend the comment for line_number.
4816 Replace the field source_file by field symtab, extend its comment.
4817 (breakpoint_free_objfile): New declaration.
4818 * objfiles.c (free_objfile): Call breakpoint_free_objfile.
4819 * tui/tui-winsource.c (tui_update_breakpoint_info): Replace bp_location
4820 field source_file references by symtab field references.
4822 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
4824 Replace xfullpath calls by gdb_realpath calls.
4825 * cli/cli-cmds.c (find_and_open_script): Remove xfullpath from the
4827 * dwarf2read.c (dw2_map_expand_apply): Remove parameter full_path.
4828 Remove it from the iterate_over_some_symtabs call.
4829 (dw2_map_symtabs_matching_filename): Remove parameter full_path.
4830 Remove it from the dw2_map_expand_apply calls, remove a block handling
4832 * psymtab.c (partial_map_expand_apply): Remove parameter full_path.
4833 Remove it from the iterate_over_some_symtabs call.
4834 (partial_map_symtabs_matching_filename): Remove parameter full_path.
4835 Remove it from the partial_map_expand_apply calls, remove a block
4836 handling it. Drop gdb_realpath call and cleanups from the real_path
4838 * source.c (openp): Drop the comment part about xfullpath. Replace
4839 xfullpath calls by gdb_realpath calls.
4840 (find_and_open_source): Replace xfullpath call by gdb_realpath call.
4841 * symfile.h (struct quick_symbol_functions): Remove parameter full_path
4842 from method map_symtabs_matching_filename and its comment.
4843 * symmisc.c (maintenance_print_msymbols): Replace xfullpath call by
4845 * symtab.c (iterate_over_some_symtabs): Remove parameter full_path,
4846 remove it also from the function comment, remove a block handling it.
4847 Drop gdb_realpath call and cleanups from the real_path handling.
4848 (iterate_over_symtabs): Drop variable full_path and its use.
4849 * symtab.h (iterate_over_some_symtabs): Remove parameter full_path.
4850 * utils.c (xfullpath): Remove.
4851 * utils.h (xfullpath): Remove.
4853 2013-02-01 Andreas Tobler <andreast@fgznet.ch>
4855 * Makefile.in (ALL_TARGET_OBS): Add ppc64-tdep.o.
4856 (HFILES_NO_SRCDIR): Add ppc64-tdep.h.
4857 (ALLDEPFILES): Add ppc64-tdep.c.
4858 * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
4859 ppc64-tdep.o to gdb_target_obs.
4860 * ppc64-tdep.h: New file.
4861 * ppc64-tdep.c: New file.
4862 (insn_d, insn_ds, insn_xfx, ppc64_desc_entry_point): Move from
4863 ppc-linux-tdep.c to here.
4864 (PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN)
4865 (PPC64_STANDARD_LINKAGE2_LEN): Likewise and use ARRAY_SIZE macro.
4866 (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target)
4867 (ppc64_standard_linkage3_target, ppc64_skip_trampoline_code): Move
4868 from ppc-linux-tdep.c to here.
4869 (ppc64_convert_from_func_ptr_addr): Rename from
4870 ppc64_linux_convert_from_func_ptr_addr to
4871 ppc64_convert_from_func_ptr_addr and move from ppc-linux-tdep.c to
4874 (read_insn): Move from ppc-linux-tdep.c to here.
4875 (insns_match_pattern, insn_d_field, insn_ds_field): Move
4876 from ppc-linux-tdep.c to here and rename them with the ppc_ prefix.
4877 * ppc-linux-tdep.c: Include ppc64-tdep.h.
4878 Removed above functions.
4879 (ppc_linux_init_abi): Adjust.
4881 2013-02-01 Aleksandar Ristovski <aristovski@qnx.com>
4883 * ada-valprint.c (ada_print_floating): Remove unused 'len'.
4885 2013-02-01 Aleksandar Ristovski <aristovski@qnx.com>
4887 * ada-lang.c (assign_aggregate): Remove unused 'is_array_aggregate'.
4889 2013-02-01 Pedro Alves <palves@redhat.com>
4891 * dummy-frame.c (deprecated_pc_in_call_dummy): Delete function.
4892 * frame.h (deprecated_pc_in_call_dummy): Delete declaration.
4894 2013-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
4896 * elfread.c (elf_symfile_read): Limit separate debug info additions to
4897 files with no separate debug info.
4898 * objfiles.c (add_separate_debug_objfile): Add gdb_assert calls.
4899 * symfile.c (read_symbols): Call find_separate_debug_file_in_section
4900 only for files with no separate debug info.
4902 2013-01-31 Tom Tromey <tromey@redhat.com>
4904 * jit.c (jit_program_space_data): Rename from jit_inferior_data;
4906 (struct jit_program_space_data): Rename from jit_inferior_data.
4908 (get_jit_program_space_data): Rename from get_jit_inferior_data.
4909 Change return type. Attach data to program space.
4910 (jit_program_space_data_cleanup): Rename from
4911 jit_inferior_data_cleanup; change argument type.
4912 (jit_read_descriptor): Change 'inf_data' argument to 'ps_data',
4914 (jit_register_code): Update.
4915 (jit_update_inferior_cache): Remove.
4916 (jit_breakpoint_deleted): Get jit data from the location's program
4918 (jit_breakpoint_re_set_internal): Rename 'inf_data' argument to
4919 'ps_data', change type.
4920 (jit_inferior_init, jit_breakpoint_re_set_internal)
4921 (jit_event_handler): Update.
4922 (free_objfile_data): Get data from objfile's program space.
4923 (_initialize_jit): Update.
4925 2013-01-31 Tom Tromey <tromey@redhat.com>
4928 * jit.c (struct jit_inferior_data) <cached_code_address,
4929 jit_breakpoint>: New fields.
4930 (jit_breakpoint_re_set_internal): Fix logging. Only create
4931 breakpoint if cached address has changed.
4932 (jit_update_inferior_cache, jit_breakpoint_deleted): New
4934 (_initialize_jit): Register breakpoint deleted observer.
4936 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
4938 * infrun.c (handle_syscall_event): Remove unused gdbarch.
4939 (save_infcall_suspend_state): Ifdef out unused inf.
4940 (restore_infcall_suspend_state): Ifdef out unused inf.
4941 * jit.c (jit_register_code): Remove unused i, b, inf_data.
4942 (jit_frame_sniffer): Remove unused inf_data.
4944 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
4946 * c-exp.y (classify_inner_name): Remove unused type.
4947 * c-lang.c (c_printstr): Remove unused byte_order, i, things_printed,
4948 in_quotes, need_comma, wchar_buf, output, cleanup, iter, finished,
4950 (c_get_string): Remove unused kind.
4951 * c-typeprint.c (c_type_print_args): Remove unused i, len, args, table2.
4953 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
4955 * charset.c (intermediate_encoding): Remove unused i.
4956 * completer.c (signal_completer): Remove unused i.
4957 * continuations.c (discard_my_continuations_1): Remove unused
4959 * corelow.c (core_close): Remove unuseD name.
4960 (get_core_siginfo): Remove unused pid.
4961 * cp-namespace.c (cp_lookup_symbol_imports_or_template): Remove unused
4963 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Remove unused base_offset.
4964 (loclist_describe_location): Remove unused first.
4965 * event-top.c (command_line_handler): Remove unused got_eof.
4966 * exec.c (exec_close_1): Remove unused need_symtab_cleanup.
4967 (resize_section_table): Remove unused old_value.
4968 * gdb_bfd.c (gdb_bfd_map_section): Remove unused header.
4969 * gnu-v3-abi.c (compute_vtable_size): Remove unused addr.
4970 * i386-tdep.c (i386_process_record): Remove unused rex.
4971 * infcmd.c (get_return_value): Remove unused uiout.
4972 * jv-lang.c (type_from_class): Remove unused is_array.
4973 * jv-valprint.c (java_val_print): Remove unused i.
4974 * linux-nat.c (linux_nat_stop_lwp): Remove unused ptid.
4975 * linux-thread-db.c (thread_db_find_new_threads_2): Remove unuseD pid.
4976 * m2-typeprint.c (m2_print_type): Remove unused code.
4977 * macroexp.c (get_character_constant): Remove unused body_start.
4978 (macro_stringify): Remove unused result.
4979 * objc-lang.c (find_methods): Remove unused gdbarch.
4980 * objfiles.c (filter_overlapping_sections): Remove unused abfd1, abfd2.
4981 * regcache.c (regcache_cooked_read): Remove unused gdbarch.
4982 * stack.c (print_frame_args): Remove unused summary.
4983 * thread.c (thread_apply_command): Remove unused p.
4984 * valarith.c (value_x_unop): Remove unused mangle_ptr.
4985 * valops.c (search_struct_method): Remove unused skip.
4986 * valprint.c (generic_val_print): Remove unused byte_order.
4987 * varobj.c (varobj_update): Remove unused changed.
4988 * cli/cli-cmds.c (complete_command): Remove unused next_item.
4989 (alias_command): Remove unused c.
4990 * mi/mi-cmd-catch.c (mi_catch_load_unload): Remove unused c.
4991 * mi/mi-main.c (mi_cmd_data_write_register_values): Remove unused
4993 (mi_cmd_data_write_memory): Remove unused word_format.
4994 (mi_cmd_data_write_memory_bytes): Remove unused r.
4995 * python/py-gdb-readline.c (gdbpy_readline_wrapper): Remove unused
4997 * python/python.c (_initialize_python): Remove unused cmd_name, cmd.
4998 * tui/tui-disasm.c (tui_set_disassem_content): Remove unused
5001 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
5003 * dwarf2-frame.c (dwarf2_compile_cfa_to_ax): Remove unused num_regs.
5004 * symtab.c (iterate_over_symtabs): Remove unused s.
5005 (find_pc_sect_symtab): Remove unused pspAce.
5006 (find_pc_sect_line): Remove unused alt_symtab.
5007 (find_pcs_for_symtab_line): Remove unused ix, previous_function.
5008 (completion_list_add_name): Remove unused newsize.
5010 2013-01-31 Tom Tromey <tromey@redhat.com>
5013 * dwarf2read.c (read_tag_ptr_to_member_type): Handle
5016 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
5018 * target.c (target_read_string): Remove unused origlen.
5020 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
5022 * auto-load.c (auto_load_expand_dir_vars): Remove unused dir_vec.
5023 * ax-gdb.c (gen_printf): Remove unused expr, i, bot, fr, flen, fmt.
5024 * ax-general.c (ax_print): Remove unused is_float.
5025 * blockframe.c (block_innermost_frame): Remove unused start, end.
5026 * break-catch-sig.c (catch_signal_command): Remove unused gdbarch.
5028 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
5030 * solib-svr4.c (svr4_keep_data_in_core): Remove unused lmo.
5031 (svr4_read_so_list): Remove unused lmo.
5032 * solib-target.c (solib_target_relocate_section_addresses): Remove
5035 2013-01-30 Tom Tromey <tromey@redhat.com>
5037 * hppa-tdep.c (read_unwind_info): Use SECT_OFF_TEXT, not "0".
5039 2013-01-30 Tom Tromey <tromey@redhat.com>
5041 * symfile.c (get_file_crc): Use bfd_calc_gnu_debuglink_crc32.
5042 * utils.c (gnu_debuglink_crc32): Remove.
5043 * utils.h (gnu_debuglink_crc32): Don't declare.
5045 2013-01-30 Tom Tromey <tromey@redhat.com>
5047 * dwarf2read.c (compute_delayed_physnames, read_call_site_scope)
5048 (read_structure_type, read_enumeration_type): Remove cast.
5050 2013-01-30 Tom Tromey <tromey@redhat.com>
5052 * dwarf2read.c (read_namespace_type): Remove cast.
5053 (read_typedef): Likewise.
5055 2013-01-29 Tom Tromey <tromey@redhat.com>
5057 * dwarf2read.c (free_dwo_file): Remove assert.
5059 2013-01-29 Tom Tromey <tromey@redhat.com>
5061 * value.c (deprecated_set_value_modifiable): Remove.
5062 * value.h (deprecated_set_value_modifiable): Remove.
5064 2013-01-28 Doug Evans <dje@google.com>
5066 * dwarf2loc.c (dwarf2_find_location_expression): Don't add base address
5067 to addresses from dwo files.
5069 2013-01-25 Siva Chandra Reddy <sivachandra@google.com>
5071 * valops.c (find_overload_match): Remove unused argument 'lax'.
5072 * value.h: Remove unused argument 'lax' from the declaration of
5073 find_overload_match.
5074 * eval.c (value_subexp_standard): Do not pass a 'lax' argument
5075 to find_overload_match.
5076 * valarith.c (value_user_defined_cpp_op): Do not pass a 'lax'
5077 argument to find_overload_match.
5079 2013-01-25 Tom Tromey <tromey@redhat.com>
5081 * dwarf2read.c (processing_has_namespace_info): Remove.
5082 (struct dwarf2_cu) <processing_has_namespace_info>: New field.
5083 (process_die, read_func_scope, dwarf2_start_symtab)
5084 (new_symbol_full): Update.
5086 2013-01-25 Tom Tromey <tromey@redhat.com>
5088 * cp-namespace.c (cp_set_block_scope): Remove.
5089 * cp-support.h (cp_set_block_scope): Remove.
5090 * dbxread.c: Include block.h.
5091 (cp_set_block_scope): New function.
5092 (process_one_symbol): Update.
5093 * dwarf2read.c (read_func_scope): Use block_set_scope.
5095 2013-01-25 Pedro Alves <palves@redhat.com>
5097 * remote.c (add_current_inferior_and_thread): Tweak comment.
5099 2013-01-25 Tom Tromey <tromey@redhat.com>
5101 * cp-namespace.c (cp_scan_for_anonymous_namespaces): Update.
5102 (cp_add_using_directive): Add 'copy_names' argument.
5103 * cp-support.h (cp_add_using_directive): Update.
5104 (struct using_direct) <import_src, import_dest, alias,
5105 declaration>: Now const.
5106 * dwarf2read.c (read_import_statement): Use obconcat.
5107 Don't copy names passed to cp_add_using_directive.
5109 2013-01-25 Tom Tromey <tromey@redhat.com>
5111 * c-exp.y (qualified_name): Use TYPE_SAFE_NAME.
5113 2013-01-25 Pedro Alves <palves@redhat.com>
5115 * remote.c (stop_reply_extract_thread): New.
5116 (add_current_inferior_and_thread): New parameter 'wait_status'.
5118 (remote_start_remote): Pass wait status to
5119 add_current_inferior_and_thread.
5120 (extended_remote_run): Update comment.
5121 (extended_remote_create_inferior_1): Pass wait status to
5122 add_current_inferior_and_thread.
5124 2013-01-25 Andrew Burgess <aburgess@broadcom.com>
5125 Ulrich Weigand <uweigand@de.ibm.com>
5127 * valarith.c (value_vector_widen): New function for replicating a
5128 scalar into a vector.
5129 (value_binop): Use value_vector_widen to widen scalar to vector
5130 rather than casting, this better matches gcc C behaviour.
5131 * valops.c (value_casst): Update logic for casting between vector
5132 types, and for casting from scalar to vector, try to match gcc C
5134 * value.h (value_vector_widen): Declare.
5135 * opencl-lang.c (opencl_value_cast): New opencl specific casting
5136 function, handle special case for casting scalar to vector.
5137 (opencl_relop): Use opencl_value_cast.
5138 (evaluate_subexp_opencl): Use opencl_value_cast instead of
5139 value_cast, and handle BINOP_ASSIGN, UNOP_CAST, and UNOP_CAST_TYPE
5140 in order to use opencl_value_cast.
5142 2013-01-25 Yao Qi <yao@codesourcery.com>
5144 * event-loop.c: Include "queue.h".
5145 (gdb_event_p): New typedef.
5146 (DECLARE_QUEUE_P): Use.
5147 (DEFINE_QUEUE_P): Use.
5148 (async_queue_event): Remove.
5149 (gdb_event_xfree): New.
5150 (initialize_event_loop): New.
5151 (process_event): Use QUEUE macros.
5152 (event_queue): Remove.
5153 (gdb_wait_for_event): Caller update.
5154 (check_async_event_handlers): Likewise.
5155 (poll_timers): Likewise.
5156 * event-loop.h (initialize_event_loop): Declare.
5157 * event-loop.c (gdb_event_xfree): New.
5158 * top.c (gdb_init): Call initialize_event_loop.
5160 2013-01-25 Yao Qi <yao@codesourcery.com>
5162 * event-loop.c (async_queue_event): Remove one parameter
5163 'position'. Remove code handling 'position' == TAIL.
5164 (gdb_wait_for_event): Caller update.
5165 (check_async_event_handlers): Caller update.
5166 (poll_timers): Caller update.
5167 * event-loop.h (enum queue_position): Remove.
5169 2013-01-25 Maxim Kuvyrkov <maxim@kugelworks.com>
5171 * MAINTAINERS: Update my email.
5173 2013-01-25 Yao Qi <yao@codesourcery.com>
5175 * main.c (print_gdb_help): Remove "--epoch" from the help
5178 2013-01-24 Ulrich Weigand <uweigand@de.ibm.com>
5180 * symtab.c (skip_prologue_using_sal): Consider a file
5181 change the same as an increased line number
5183 2013-01-24 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
5185 * MAINTAINERS (Write After Approval): Add myself to the list.
5187 2013-01-24 Tom Tromey <tromey@redhat.com>
5189 * ada-lang.h (ada_decode_symbol): Make return type const.
5190 * ada-lang.c (ada_decode_symbol): Likewise.
5192 2013-01-23 Doug Evans <dje@google.com>
5194 * linespec.c (find_linespec_symbols): Make static.
5196 2013-01-23 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
5198 * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value): Set correct
5199 type on float conversion for complex type.
5201 2013-01-23 Siva Chandra Reddy <sivachandra@google.com>
5203 Add a new class gdb.Architecture which exposes GDB's
5204 internal representation of architecture via GDB Python API.
5205 * Makefile.in: Add entries corresponding to the new file
5207 * NEWS (Python Scripting): Add entries for the new class
5208 gdb.Architecture and the new method gdb.Frame.architecture.
5209 * python/py-arch.c: Implement gdb.Architecture class.
5210 * python/py-frame.c (frapy_arch): Implement the method
5211 gdb.Frame.architecture().
5212 (frame_object_methods): Add 'architecture' to the method table.
5213 * python/python-internal.h: Add declarations of new utility
5215 * python/python.c (_initialize_python): Initialize
5216 gdb.Architecture class.
5218 2013-01-23 Doug Evans <dje@google.com>
5220 Work around binutils/15021.
5221 * dwarf2read.c (dwarf2_per_cu_data): Split imported_symtabs and
5222 type_unit_group out of union s. All uses updated.
5223 (read_index_from_section): Watch for index version 8.
5224 (follow_die_sig): If using .gdb_index version <= 7, record the TU as
5226 (write_psymtabs_to_index): Increment version number to 8.
5228 2013-01-22 Pedro Alves <palves@redhat.com>
5230 * annotate.c (breakpoint_changed): Skip if breakpoint is not
5233 2013-01-22 Pedro Alves <palves@redhat.com>
5235 * annotate.c (annotate_breakpoints_changed): Rename to ...
5236 (annotate_breakpoints_invalid): ... this. Make static.
5237 (breakpoint_changed): Adjust.
5238 (_initialize_annotate): Always install the observers. Install a
5239 "breakpoint_created" observer.
5240 * annotate.h (annotate_breakpoints_changed): Delete declaration.
5241 * breakpoint.c (set_breakpoint_condition)
5242 (breakpoint_set_commands, do_map_commands_command)
5243 (init_raw_breakpoint, clear_command, set_ignore_count)
5244 (enable_breakpoint_disp): No longer call
5245 annotate_breakpoints_changed.
5247 2013-01-22 Pedro Alves <palves@redhat.com>
5249 * annotate.c: Include "inferior.h".
5250 (frames_invalid_emitted)
5251 (breakpoints_invalid_emitted): New globals.
5252 (async_background_execution_p): New function.
5253 (annotate_breakpoints_changed, annotate_frames_invalid): Skip
5254 emitting the annotation if it has already been emitted.
5255 (annotate_display_prompt): New function.
5256 * annotate.h (annotate_display_prompt): New declaration.
5257 * event-top.c: Include annotate.h.
5258 (display_gdb_prompt): Call annotate_display_prompt.
5260 2013-01-22 Pedro Alves <palves@redhat.com>
5262 * annotate.c (ignore_count_changed): Delete.
5263 (annotate_breakpoints_changed): Don't clear ignore_count_changed.
5264 (annotate_ignore_count_change): Delete.
5265 (annotate_stopped): Don't emit a delayed breakpoints-changed
5267 * annotate.h (annotate_ignore_count_change): Delete.
5268 * breakpoint.c (bpstat_check_breakpoint_conditions): Don't call
5269 annotate_ignore_count_change.
5271 2013-01-22 Tom Tromey <tromey@redhat.com>
5273 * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>: Only
5274 require_rvalue for a register location.
5276 2013-01-21 Marc Khouzam <marc.khouzam@ericsson.com>
5278 * breakpoint.c (print_one_breakpoint_location): Add MI
5279 field 'thread-groups' when printing a breakpoint.
5280 (output_thread_groups): New function.
5282 2013-01-21 Siva Chandra Reddy <sivachandra@google.com>
5284 * python/lib/gdb/commands/explore.py
5285 (CompoundExplorer.explore_expr): Correct the name of a method
5287 (ExploreTypeCommand.invoke): Add a missing 'return'.
5289 2013-01-21 Tom Tromey <tromey@redhat.com>
5291 * gdb_obstack.h (obconcat): Move declaration here, from...
5292 * symfile.h (obconcat): ... here.
5293 * gdb_obstack.c: New file.
5294 (obconcat): Move from...
5295 * symfile.c (obconcat): ... here.
5296 * Makefile.in (SFILES): Add gdb_obstack.c.
5297 (COMMON_OBS): Add gdb_obstack.o.
5299 2013-01-21 Tom Tromey <tromey@redhat.com>
5301 * symfile.h (obsavestring): Don't declare.
5302 * symfile.c (obsavestring): Remove.
5303 * ada-exp.y: Use obstack_copy0, not obsavestring.
5304 * ada-lang.c: Use obstack_copy0, not obsavestring.
5305 * coffread.c: Use obstack_copy0, not obsavestring.
5306 * cp-namespace.c: Use obstack_copy0, not obsavestring.
5307 * dbxread.c: Use obstack_copy0, not obsavestring.
5308 * dwarf2read.c: Use obstack_copy0, not obsavestring.
5309 * jit.c: Use obstack_copy0, not obsavestring.
5310 * mdebugread.c: Use obstack_copy0, not obsavestring.
5311 * psymtab.c: Use obstack_copy0, not obsavestring.
5312 * stabsread.c: Use obstack_copy0, not obsavestring.
5313 * xcoffread.c: Use obstack_copy0, not obsavestring.
5315 2013-01-21 Tom Tromey <tromey@redhat.com>
5317 * dwarf2read.c (fixup_go_packaging): Save package name
5319 * gdbtypes.c (init_type): Don't copy name.
5321 2013-01-21 Tom Tromey <tromey@redhat.com>
5323 * dwarf2read.c (struct partial_die_info) <name, scope>: Now
5325 (struct attribute) <u.str>: Now const.
5326 (struct fnfieldlist) <name>: Now const.
5327 (dw2_get_file_names_reader, init_cutu_and_read_dies): Update.
5328 (partial_die_parent_scope): Make return type const.
5329 (partial_die_full_name, add_partial_symbol): Update.
5330 (dwarf2_compute_name, dwarf2_full_name, dwarf2_physname): Make
5332 (find_file_and_directory): Make 'name' and 'comp_dir' const.
5333 (read_file_scope, read_func_scope, dwarf2_add_field)
5334 (dwarf2_add_member_fn, read_structure_type)
5335 (process_enumeration_scope, read_array_type, read_module_type)
5336 (read_base_type, read_subrange_type): Update.
5337 (dwarf2_start_symtab): Make 'name' and 'comp_dir' const.
5338 (new_symbol_full, guess_full_die_structure_name): Update.
5339 (dwarf2_canonicalize_name): Return const type. Make 'name' const.
5340 (dwarf2_name): Return const type.
5341 (dwarf_decode_macro_bytes, dwarf_decode_macros): Make 'comp_dir'
5344 2013-01-21 Tom Tromey <tromey@redhat.com>
5346 * gdbtypes.c (init_type): Make 'name' const.
5347 * gdbtypes.h (init_type): Update.
5349 2013-01-21 Tom Tromey <tromey@redhat.com>
5351 * buildsym.c (patch_subfile_names): Use set_last_source_file.
5352 (start_symtab): Make 'name' and 'dirname' const. Use
5353 set_last_source_file.
5354 (restart_symtab, reset_symtab_globals): Use set_last_source_file.
5355 (last_source_file): Define. Now static.
5356 (set_last_source_file, get_last_source_file): New functions.
5357 * buildsym.h (last_source_file): Don't declare.
5358 (start_symtab): Update.
5359 (set_last_source_file, get_last_source_file): Declare.
5360 * coffread.c (complete_symtab): Use set_last_source_file.
5361 (coff_end_symtab): Likewise.
5362 (coff_symtab_read): Use set_last_source_file, get_last_source_file.
5363 * dbxread.c (read_dbx_symtab, read_ofile_symtab): Use
5364 set_last_source_file.
5365 (process_one_symbol): Use get_last_source_file.
5366 * mdebugread.c (parse_partial_symbols): Use set_last_source_file.
5367 (psymtab_to_symtab_1): Use get_last_source_file.
5368 * xcoffread.c (process_linenos): Use get_last_source_file.
5369 (complete_symtab): Use set_last_source_file.
5370 (read_xcoff_symtab): Use set_last_source_file, get_last_source_file.
5371 (scan_xcoff_symtab): Use set_last_source_file.
5373 2013-01-21 Tom Tromey <tromey@redhat.com>
5375 * symtab.c (struct demangled_name_entry) <mangled>: Now const.
5376 (symbol_set_names): Remove casts. Handle field const-ness.
5378 2013-01-21 Tom Tromey <tromey@redhat.com>
5380 * dwarf2read.c (new_symbol_full): Remove cast.
5381 * symtab.c (symbol_set_demangled_name): Make 'name' const.
5382 * symtab.h (symbol_set_demangled_name): Update.
5384 2013-01-21 Tom Tromey <tromey@redhat.com>
5386 * main.c (captured_main): Call bfd_init.
5388 2013-01-21 Tom Tromey <tromey@redhat.com>
5390 * gnu-v2-abi.c (_initialize_gnu_v2_abi): Don't set default ABI.
5391 * gnu-v3-abi.c (_initialize_gnu_v3_abi): Set default ABI.
5392 * minsyms.c (install_minimal_symbols): Don't check for _Z symbols.
5395 2013-01-21 Jan Kratochvil <jan.kratochvil@redhat.com>
5397 * symmisc.c (maintenance_print_msymbols): Check also ST_DEV.
5399 2013-01-21 Jan Kratochvil <jan.kratochvil@redhat.com>
5401 Fix gdb.fortran/common-block.exp crash in PIE mode.
5402 * dwarf2read.c (new_symbol_full) <DW_TAG_common_block>: Use
5404 * f-valprint.c (info_common_command_for_block): Expect
5405 LOC_COMMON_BLOCK in gdb_assert.
5406 * symtab.h (struct general_symbol_info): Update comment for the
5407 common_block member.
5408 (domain_enum): Extend comment for the COMMON_BLOCK_DOMAIN member.
5409 (enum address_class): New member LOC_COMMON_BLOCK.
5411 2013-01-18 David Blaikie <dblaikie@gmail.com>
5413 * MAINTAINERS (Write After Approval): Add "David Blaikie".
5415 2013-01-18 Tom Tromey <tromey@redhat.com>
5418 * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>:
5419 Call require_rvalue.
5421 2013-01-18 Yao Qi <yao@codesourcery.com>
5423 * dbxread.c (dbx_psymtab_to_symtab): Delete the declaration.
5424 (dbx_read_symtab): New declaration.
5425 (dbx_psymtab_to_symtab): Delete.
5426 (dbx_read_symtab): Rename from dbx_psymtab_to_symtab.
5427 Rename parameter PST to SELF. Exchanged two parameters.
5428 (start_psymtab): Caller update.
5429 * dwarf2read.c (dwarf2_psymtab_to_symtab): Delete the declaration.
5430 (dwarf2_read_symtab): New declaration.
5431 (dwarf2_psymtab_to_symtab): Delete.
5432 (dwarf2_read_symtab): Rename from dwarf2_psymtab_to_symtab.
5433 Rename parameter PST to SELF. Exchanged two parameters.
5434 (create_partial_symtab): Caller update.
5435 * mdebugread.c (mdebug_psymtab_to_symtab): Delete.
5436 (mdebug_read_symtab): Rename from mdebug_psymtab_to_symtab.
5437 Rename parameter PST to SELF. Exchanged two parameters.
5438 (parse_partial_symbols, new_psymtab): Caller update.
5439 * psympriv.h (struct partial_symtab) <read_symtab>: Exchange
5441 * psymtab.c (psymtab_to_symtab): Caller update.
5442 * xcoffread.c (xcoff_psymtab_to_symtab): Delete.
5443 (xcoff_read_symtab): Rename from xcoff_psymtab_to_symtab.
5444 Rename parameter PST to SELF. Exchanged two parameters.
5445 (xcoff_start_psymtab): Caller update.
5447 2013-01-18 Yao Qi <yao@codesourcery.com>
5449 * infrun.c (proceed): Rename local variable 'oneproc' to
5452 2013-01-17 Doug Evans <dje@google.com>
5454 * dwarf2read.c (dw2_build_type_unit_groups_reader): Delete.
5455 (dw2_build_type_unit_groups): Delete. All uses updated.
5457 * symtab.h (struct symbol_search): Add comment.
5459 2013-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
5461 * symtab.c (compare_filenames_for_search): New comment for
5464 2013-01-17 Tom Tromey <tromey@redhat.com>
5466 * cp-abi.c (cp_abi_completer): Fix typo in assignment.
5468 2013-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
5470 * symtab.c (iterate_over_some_symtabs): New variable cleanups,
5471 initialize it by existing make_cleanup. Call new do_cleanups.
5473 2013-01-17 Tom Tromey <tromey@redhat.com>
5475 * cp-abi.c (cp_abi_completer): New function.
5476 (_initialize_cp_abi): Set completer for "set cp-abi".
5478 2013-01-17 Tom Tromey <tromey@redhat.com>
5480 * mem-break.c: Remove obsolete comment.
5481 * bfin-tdep.c (bfin_breakpoint_from_pc): Fix comment.
5483 2012-01-17 Sanjoy Das <sanjoy@playingwithpointers.com>
5485 * jit.c (jit_reader_load_command): Interpret the jit reader name
5486 as an absolute path if it begins with a forward slash.
5488 2012-01-17 Sanjoy Das <sanjoy@playingwithpointers.com>
5492 * jit.c (finalize_symtab): Ensure that only the global block has a
5495 2013-01-17 Pedro Alves <palves@redhat.com>
5497 * acinclude.m4: Include ../config/plugins.m4,
5498 ../config/largefile.m4 and ../config/lead-dot.m4. Add comments.
5499 * Makefile.in (aclocal_m4_deps): Update.
5500 * aclocal.m4: Renegerate.
5502 2013-01-16 Doug Evans <dje@google.com>
5504 * contrib/cc-with-tweaks.sh: Add references to Fission docs.
5506 2013-01-16 Pedro Alves <palves@redhat.com>
5507 Tom Tromey <tromey@redhat.com>
5510 * NEWS: Add "catch signal".
5511 * breakpoint.c (base_breakpoint_ops): No longer static.
5512 (bpstat_explains_signal): New function.
5513 (init_catchpoint): No longer static.
5514 (base_breakpoint_explains_signal): New function.
5515 (base_breakpoint_ops): Initialize new field.
5516 * breakpoint.h (enum bpstat_signal_value): New.
5517 (struct breakpoint_ops) <explains_signal>: New field.
5518 (bpstat_explains_signal): Remove macro, declare as function.
5519 (base_breakpoint_ops, init_catchpoint): Declare.
5520 * break-catch-sig.c: New file.
5521 * inferior.h (signal_catch_update): Declare.
5522 * infrun.c (signal_catch): New global.
5523 (handle_syscall_event): Update for change to
5524 bpstat_explains_signal.
5525 (handle_inferior_event): Likewise. Always handle random signals
5527 (signal_cache_update): Check signal_catch.
5528 (signal_catch_update): New function.
5529 (_initialize_infrun): Initialize signal_catch.
5530 * Makefile.in (SFILES): Add break-catch-sig.c.
5531 (COMMON_OBS): Add break-catch-sig.o.
5533 2013-01-16 Tom Tromey <tromey@redhat.com>
5535 * breakpoint.c (print_one_catch_fork, print_one_catch_vfork)
5536 (print_one_catch_solib, print_one_catch_syscall)
5537 (print_one_catch_exec, print_one_exception_catchpoint): Emit
5540 2013-01-16 Yao Qi <yao@codesourcery.com>
5542 * printcmd.c (current_display_number): Make it static.
5544 2013-01-16 Yao Qi <yao@codesourcery.com>
5546 * infcmd.c (step_once): Don't check '!single_inst' as it was
5549 2013-01-15 Jan Kratochvil <jan.kratochvil@redhat.com>
5551 * dwarf2read.c (psymtab_include_file_name): Extend the function comment.
5553 2013-01-14 Tom Tromey <tromey@redhat.com>
5555 * cli/cli-decode.c (add_setshow_string_noescape_cmd): Return the
5557 * command.h (add_setshow_string_noescape_cmd): Update.
5558 * corefile.c (set_gnutarget_command): Remove trailing whitespace.
5559 (complete_set_gnutarget): New function.
5560 (_initialize_core): Set the "set gnutarget" completer.
5562 2013-01-14 Tom Tromey <tromey@redhat.com>
5565 * c-typeprint.c (cp_type_print_method_args): Handle 'restrict'.
5566 (c_type_print_modifier): Likewise.
5567 * dwarf2read.c (read_tag_restrict_type): New function.
5568 (read_type_die_1): Handle DW_TAG_restrict_type.
5569 * gdbtypes.c (make_restrict_type): New function.
5570 (recursive_dump_type): Handle TYPE_RESTRICT.
5571 * gdbtypes.h (enum type_flag_values): Renumber.
5572 (enum type_instance_flag_value): Add
5573 TYPE_INSTANCE_FLAG_RESTRICT.
5574 (TYPE_RESTRICT): New macro.
5575 (make_restrict_type): Declare.
5577 2013-01-14 Tom Tromey <tromey@redhat.com>
5580 * psymtab.c (struct psymtab_state): New.
5581 (discard_psymtabs_upto, make_cleanup_discard_psymtabs): New
5583 * psympriv.h (make_cleanup_discard_psymtabs): Declare.
5584 * dwarf2read.c (dwarf2_build_psymtabs): Catch exceptions.
5586 2013-01-14 Richard Sharman <richard_sharman@mitel.com>
5587 Pedro Alves <palves@redhat.com>
5591 * remote.c (remote_threads_info): Make a copy of the reply from
5592 qfThreadInfo and use that instead of rs->buf.
5594 2013-01-14 Yao Qi <yao@codesourcery.com>
5596 * dbxread.c (dbx_psymtab_to_symtab_1): Don't check PST is NULL.
5597 (dbx_psymtab_to_symtab): Likewise.
5598 * dwarf2read.c (dwarf2_psymtab_to_symtab): Likewise.
5599 * mdebugread.c (mdebug_psymtab_to_symtab): Likewise.
5600 * xcoffread.c (xcoff_psymtab_to_symtab_1): Likewise.
5602 2013-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
5604 * parse.c (parse_exp_in_context): New variable inner_chain. Call
5605 make_cleanup_restore_current_language. Call set_language. Move
5606 OLD_CHAIN and INNER_CHAIN cleanups.
5607 * utils.c (do_restore_current_language)
5608 (make_cleanup_restore_current_language): New functions.
5609 * utils.h (make_cleanup_restore_current_language): New declaration.
5611 2013-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
5613 * source.c (symtab_to_fullname): Apply rewrite_source_path also for
5616 * source.c (symtab_to_fullname): Do not prepend DIRNAME for
5617 non-existing files if FILENAME is already absolute.
5619 2013-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
5621 * macrocmd.c (macro_inform_no_debuginfo): Use puts_filtered instead of
5622 fputs_filtered. Append trailing newline.
5624 2013-01-11 Yao Qi <yao@codesourcery.com>
5625 Stan Shebs <stan@codesourcery.com>
5627 * psymtab.c (init_psymbol_list): Clarify the comment.
5629 2013-01-11 Yao Qi <yao@codesourcery.com>
5631 * breakpoint.c (print_one_breakpoint_location): Remove dead code.
5632 (update_dprintf_command_list): Assert that 'printf_line' is
5633 non-null. Remove condition check.
5635 2013-01-10 Jan Kratochvil <jan.kratochvil@redhat.com>
5638 * psymtab.c (psymtab_to_fullname, psymtab_to_fullname): Make the return
5640 * tui/tui-source.c (tui_source_is_displayed): Make the parameter fname
5642 * tui/tui-source.h (tui_source_is_displayed): Likewise.
5644 2013-01-09 Anthony Green <green@moxielogic.com>
5646 * cp-abi.c (cplus_print_vtable): Don't return value from void
5648 * ada-lang.c (re_set_catch_assert): Ditto.
5650 2013-01-09 Doug Evans <dje@google.com>
5652 * symfile.h (quick_symbol_functions): Delete member
5653 pre_expand_symtabs_matching. All uses removed.
5654 * dwarf2read.c (dw2_lookup_symbol): Implement.
5655 (dw2_do_expand_symtabs_matching): Delete.
5656 (dw2_pre_expand_symtabs_matching): Delete.
5657 (struct dw2_symtab_iterator): New type.
5658 (dw2_symtab_iter_init, dw2_symtab_iter_next): New functions.
5659 (dw2_expand_symtabs_for_function): Rewrite.
5660 (dwarf2_gdb_index_functions): Update.
5661 * psymtab.c (pre_expand_symtabs_matching_psymtabs): Delete.
5662 (psym_functions): Update.
5664 2013-01-09 Tom Tromey <tromey@redhat.com>
5666 * config/pa/hpux.mh (NATDEPFILES): Remove somread.o.
5667 * configure: Rebuild.
5668 * configure.ac: Add somread.o to the build if BFD has SOM
5670 * somread.c: Include som/aout.h, not syms.h.
5671 (som_symtab_read): Use som_external_symbol_dictionary_record.
5672 Unpack records manually.
5673 (_initialize_somread): Declare.
5675 2012-01-08 Mike Frysinger <vapier@gentoo.org>
5677 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx) [__x86_64__]:
5678 Cast return_address to 64bits.
5680 2013-01-08 Hui Zhu <hui_zhu@mentor.com>
5682 * printcmd.c: Remove define of function output_command.
5683 * tracepoint.c: Remove extern of function output_command.
5684 * valprint.h: (output_command): New extern.
5686 2013-01-07 Tom Tromey <tromey@redhat.com>
5688 * objc-lang.c (objc_emit_char, objc_printchar, objc_printstr):
5690 (objc_language_defn): Use c_printchar, c_printstr,
5693 2013-01-07 Tom Tromey <tromey@redhat.com>
5697 * ada-valprint.c (printstr, print_field_values): Remove
5699 * cp-valprint.c (cp_print_value_fields): Remove "inspect_it"
5701 * jv-valprint.c (java_print_value_fields): Remove "inspect_it"
5703 * m2-lang.c (m2_printstr): Remove "inspect_it" code.
5704 * main.c (captured_main): Remove "epoch" argument.
5705 * objc-lang.c (objc_printstr): Remove "inspect_it" code.
5706 * p-lang.c (pascal_printstr): Remove "inspect_it" code.
5707 * p-valprint.c (pascal_object_print_value_fields): Remove
5709 * printcmd.c (print_command_1): Remove 'inspect' argument.
5710 (print_command, call_command): Update.
5711 (inspect_command): Remove.
5712 (_initialize_printcmd): Make "inspect" an alias for "print".
5713 * top.c (epoch_interface): Remove.
5714 * top.h (epoch_interface): Remove.
5715 * valprint.c (user_print_options): Update.
5716 (print_converted_chars_to_obstack): Remove "inspect_it" code.
5717 * valprint.h (struct value_print_options) <inspect_it>: Remove
5720 2013-01-04 Tom Tromey <tromey@redhat.com>
5722 * valprint.h (read_string): Add 'extern'.
5724 2013-01-07 Joel Brobecker <brobecker@adacore.com>
5726 * darwin-nat.c: Fix typo in TASK_DYLD_INFO_COUNT macro test
5727 used to decide whether to define darwin_read_dyld_info or not.
5729 2013-01-03 Pierre Muller <muller@sourceware.org>
5731 * main.c (relocate_gdb_directory): Avoid calling stat function
5734 2013-01-03 Yao Qi <yao@codesourcery.com>
5736 * psymtab.c (fixup_psymbol_section): Update declaration.
5737 (fixup_psymbol_section): Remove code returning value.
5739 2013-01-03 Yao Qi <yao@codesourcery.com>
5741 * symtab.h: Remove some out of date comments.
5742 (enum exception_event_kind): Move it ...
5743 * breakpoint.c: ... here.
5745 2013-01-02 Iain Sandoe <developer@sandoe-acoustics.co.uk>
5748 * darwin-nat.c (darwin_read_dyld_info): Only build if
5749 TASK_DYLD_INFO_COUNT is defined.
5750 (darwin_xfer_partial): Call darwin_read_dyld_info only if
5751 TASK_DYLD_INFO_COUNT is defined.
5753 2013-01-02 Tom Tromey <tromey@redhat.com>
5755 * symfile.h (struct ecoff_debug_hack): Remove.
5756 * objfiles.c: Don't include mdebugread.h.
5758 2013-01-02 Tom Tromey <tromey@redhat.com>
5760 * config/i386/darwin.mh (NATDEPFILES): Remove machoread.o.
5761 * configure.ac: Check for Mach-O support in BFD. Update
5763 * configure: Rebuild.
5765 2013-01-02 Tom Tromey <tromey@redhat.com>
5767 * acinclude.m4 (GDB_AC_CHECK_BFD): New macro.
5768 * configure.ac: Use GDB_AC_CHECK_BFD.
5769 * configure: Rebuild.
5771 2013-01-01 Maxim Kuvyrkov <maxim.kuvyrkov@gmail.com>
5773 * MAINTAINERS: Update my email.
5775 2013-01-01 Joel Brobecker <brobecker@adacore.com>
5777 * cli/cli-script.h (make_cleanup_free_command_lines): Make extern.
5779 2013-01-01 Joel Brobecker <brobecker@adacore.com>
5781 * rs6000-nat.c (bss_data_overlap): New function.
5782 (vmap_symtab): Use it to adjust the .bss section's offset.
5784 2013-01-01 Joel Brobecker <brobecker@adacore.com>
5786 Update year range in copyright notice of all files.
5788 2013-01-01, 13 Joel Brobecker <brobecker@adacore.com>
5790 * top.c (print_gdb_version): Update copyright year.
5792 For older changes see ChangeLog-2012.
5798 version-control: never