1 2013-03-27 Pedro Alves <palves@redhat.com>
3 * top.c (history_size): Rename to ...
4 (history_size_setshow_var): ... this. Add comment.
5 (show_commands): Use readline's 'history_length' instead of
6 computing the history length by calling history_get in a loop.
7 (set_history_size_command): Error out for sizes over INT_MAX.
8 Restore previous history size on invalid size.
9 (init_history): If HISTSIZE is negative, leave the history size as
13 2013-03-27 Pedro Alves <palves@redhat.com>
15 * coff-pe-read.c (_initialize_coff_pe_read): Rename "set debug
16 coff_pe_read" command to "set debug coff-pe-read".
18 2013-03-27 Markus Metzger <markus.t.metzger@intel.com>
20 * record.c (command_size_to_target_size): Fix size comparison.
21 Change parameter type from pointer to integer to integer.
24 2013-03-27 Pierre Muller <muller@sourceware.org>
26 * windows-nat.c (handle_output_debug_string): Avoid typecast
27 from integer of different size warning.
29 2013-03-26 Joel Brobecker <brobecker@adacore.com>
31 * windows-nat.c (handle_output_debug_string): Add empty line
32 after local block variable definition.
34 2013-03-26 Pedro Alves <palves@redhat.com>
36 * ser-tcp.c (wait_for_connect): Make 'polls' parameter unsigned.
37 (net_open): Make 'polls' local unsigned.
39 2013-03-26 Pedro Alves <palves@redhat.com>
41 * remote.c (_initialize_remote): Make "set remoteaddresssize"
42 a zuinteger command instead of uinteger.
44 2013-03-26 Pedro Alves <palves@redhat.com>
46 * record-full.c (record_full_insn_num): Make it unsigned.
47 (record_full_check_insn_num, record_full_message)
48 (record_full_registers_change, record_full_xfer_partial): Remove
49 record_full_insn_max_num check (it's always != 0).
50 (record_full_info, record_full_restore): Use %u as format string.
51 (): Use %u as format string.
52 (set_record_full_insn_max_num): Remove record_full_insn_max_num
53 check (it's always != 0).
55 2013-03-26 Pedro Alves <palves@redhat.com>
57 * dcache.c (_initialize_dcache): Make the "set dcache line-size"
58 and "set dcache size" commands zuinteger instead of uinteger.
60 2013-03-26 Pedro Alves <palves@redhat.com>
62 * cris-tdep.c (_initialize_cris_tdep): Make the "set cris-version"
63 command zuinteger instead of uinteger.
65 2013-03-26 Pedro Alves <palves@redhat.com>
67 * coff-pe-read.c (_initialize_coff_pe_read): Make the command
68 zuinteger instead of uinteger.
70 2013-03-26 Pedro Alves <palves@redhat.com>
72 * record.c (record_insn_history_size_setshow_var)
73 (record_call_history_size_setshow_var): New globals.
74 (command_size_to_target_size): New function.
75 (cmd_record_insn_history, cmd_record_call_history): Use
76 command_size_to_target_size instead of cast.
77 (validate_history_size, set_record_insn_history_size)
78 (set_record_call_history_size): New functions.
79 (_initialize_record): Install set_record_insn_history_size and
80 set_record_call_history_size as "set" hooks of "set record
81 instruction-history-size" and "set record
82 function-call-history-size".
84 2013-03-26 Pedro Alves <palves@redhat.com>
86 * top.c (gdb_rl_operate_and_get_next): Replace max_input_history
87 use with history_max_entries use. Remove FIXME note.
89 2013-03-26 Markus Metzger <markus.t.metzger@intel.com>
91 * record-btrace.c (record_btrace_close): Call
92 record_btrace_auto_disable.
94 2013-03-25 Joel Brobecker <brobecker@adacore.com>
96 * rs6000-nat.c (fixup_breakpoints): Delete declaration.
98 2013-03-25 Doug Evans <dje@google.com>
100 * contrib/cc-with-tweaks.sh: Check exit code of dwp.
102 2013-03-25 Tom Tromey <tromey@redhat.com>
105 * c-exp.y (exp): Add new productions for destructors after '.' and
107 (write_destructor_name): New function.
109 2013-03-25 Tom Tromey <tromey@redhat.com>
112 * opencl-lang.c (evaluate_subexp_opencl) <STRUCTOP_STRUCT>: Use
113 value_struct_elt, not lookup_struct_elt_type.
114 * eval.c (evaluate_subexp_standard) <STRUCTOP_STRUCT,
115 STRUCTOP_PTR>: Use value_struct_elt, not lookup_struct_elt_type.
116 * expression.h (EVAL_AVOID_SIDE_EFFECTS): Update comment.
118 2013-03-25 Yao Qi <yao@codesourcery.com>
120 * ctf.c [USE_WIN32API]: Undef 'mkdir' and use 'mkdir'
123 2013-03-23 Eli Zaretskii <eliz@gnu.org>
125 * windows-nat.c (windows_get_absolute_argv0): New function.
126 * windows-nat.h: Add its prototype.
128 * main.c (get_init_files): Use filename_ncmp instead of strncmp.
129 Use IS_DIR_SEPARATOR instead of looking for a character inside
130 SLASH_STRING. Include filenames.h.
131 (captured_main) [__MINGW32__]: Make argv[0] absolute, so that
132 relocate_gdb_directory works when passed gdb_program_name.
133 Include windows-nat.h.
135 2013-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
137 * exceptions.h (enum errors): New entry TARGET_CLOSE_ERROR.
138 * remote.c (trace_error): Remove the special handling of '2'.
139 (readchar) <SERIAL_EOF>
140 (readchar) <SERIAL_ERROR>
141 (getpkt_or_notif_sane_1): Use TARGET_CLOSE_ERROR for them.
142 (remote_get_trace_status): Call throw_exception if EX is
144 * utils.c (perror_with_name): Rename to ...
145 (throw_perror_with_name): ... here. New parameter errcode, describe it
146 in the function comment.
147 (perror_with_name): New function wrapper.
148 * utils.h (enum errors): New stub declaration.
149 (throw_perror_with_name): New declaration.
151 2013-03-22 Pedro Alves <palves@redhat.com>
152 Yao Qi <yao@codesourcery.com>
153 Mark Kettenis <kettenis@gnu.org>
155 * cli/cli-setshow.c (do_set_command) <var_uinteger>:
156 Don't let the user set the value to UINT_MAX directly.
157 <var_integer>: Don't let the user set the value to INT_MAX
160 2013-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
162 * remote.c (remote_unpush_target): New function.
163 (remote_open_1): Remove two pop_target calls, update one comment, add
164 comment to target_preopen call. Replace pop_target call by
165 remote_unpush_target call.
166 (interrupt_query, readchar, getpkt_or_notif_sane_1): Replace
167 pop_target calls by remote_unpush_target calls.
169 2013-03-22 Pedro Alves <palves@redhat.com>
171 * linux-nat.c (linux_child_follow_fork): Don't call
172 linux_enable_event_reporting.
173 (linux_handle_extended_wait): Don't call
174 linux_enable_event_reporting.
176 2013-03-22 Pedro Alves <palves@redhat.com>
178 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Define INSN macro,
179 use it to rewrite the trampoline buffers with type gdb_byte[], and
180 undefine the macro. Remove char* cast.
182 2013-03-21 Doug Evans <dje@google.com>
184 New commands "mt set per-command {space,time,symtab} {on,off}".
186 * event-top.c: #include "maint.h".
187 * main.c: #include "maint.h".
188 * maint.c: #include <sys/time.h>, <time.h>, block.h, top.h,
189 timeval-utils.h, maint.h, cli/cli-setshow.h.
190 (per_command_time, per_command_space): New static globals.
191 (per_command_symtab): New static global.
192 (per_command_setlist, per_command_showlist): New static globals.
193 (struct cmd_stats): Move here from utils.c.
194 (set_per_command_time): Renamed from set_display_time in utils.c
195 and moved here. All callers updated.
196 (set_per_command_space): Renamed from set_display_space in utils.c
197 and moved here. All callers updated.
198 (count_symtabs_and_blocks): New function.
199 (report_command_stats): Moved here from utils.c. Add support for
200 printing symtab stats. Only print data if enabled before command
202 (make_command_stats_cleanup): Ditto.
203 (sert_per_command_cmd, show_per_command_cmd): New functions.
204 (_initialize_maint_cmds): Add new commands
205 mt set per-command {space,time,symtab} {on,off}.
207 * top.c: #include "maint.h".
208 * utils.c (reset_prompt_for_continue_wait_time): New function.
209 (get_prompt_for_continue_wait_time): New function.
210 * utils.h (reset_prompt_for_continue_wait_time): Declare
211 (get_prompt_for_continue_wait_time): Declare.
212 (make_command_stats_cleanup): Moved to maint.h.
213 (set_display_time, set_display_space): Moved to maint.h and renamed
214 to set_per_command_time, set_per_command_space.
215 * cli/cli-setshow.c (parse_cli_boolean_value): Renamed from
216 parse_binary_operation and made non-static. Don't call error,
217 just return an error marker. All callers updated.
218 * cli/cli-setshow.h (parse_cli_boolean_value): Declare.
220 2013-03-21 Tom Tromey <tromey@redhat.com>
222 * symfile.c (alloc_section_addr_info): Update header. Don't set
223 'num_sections' field.
224 (build_section_addr_info_from_section_table): Set 'num_sections'.
225 (build_section_addr_info_from_bfd): Likewise.
226 (build_section_addr_info_from_objfile): Remove dead loop
228 (free_section_addr_info): Unconditionally call xfree.
229 (relative_addr_info_to_section_offsets, addrs_section_sort)
230 (addr_info_make_relative, syms_from_objfile_1): Remove dead loop
232 (syms_from_objfile_1): Remove dead 'if' condition. Check
234 (add_symbol_file_command): Set 'num_sections'.
235 * symfile-mem.c (symbol_file_add_from_memory): Set
237 * somread.c (som_symfile_offsets): Remove dead loop condition.
238 * machoread.c (macho_symfile_offsets): Remove dead 'if'.
239 * jit.c (jit_bfd_try_read_symtab): Set 'num_sections'.
241 2013-03-21 Tom Tromey <tromey@redhat.com>
243 * tracepoint.h (decode_agent_options): Add 'trace_string'
245 * tracepoint.c (decode_agent_options): Add 'trace_string'
247 (validate_actionline): Update.
248 (collect_symbol): Add 'trace_string' argument.
249 (struct add_local_symbols_data) <trace_string>: New field.
250 (do_collect_symbol): Update.
251 (add_local_symbols): Add 'trace_string' argument.
252 (encode_actions_1): Update.
253 (trace_dump_actions): Update.
254 * dwarf2loc.c (access_memory): Update.
255 * ax.h (struct agent_expr) <tracing, trace_string>: New fields.
256 * ax-general.c (new_agent_expr): Update.
257 * ax-gdb.h (gen_trace_for_expr, gen_trace_for_var)
258 (gen_trace_for_return_address): Add argument.
259 (trace_kludge, trace_string_kludge): Remove.
260 * ax-gdb.c (trace_kludge, trace_string_kludge): Remove.
261 (gen_traced_pop, gen_fetch, gen_bitfield_ref, gen_expr): Update.
262 (gen_trace_for_var): Add 'trace_string' argument.
263 (gen_trace_for_expr, gen_trace_for_return_address): Likewise.
264 (gen_printf, agent_eval_command_one): Update.
266 2013-03-21 Tom Tromey <tromey@redhat.com>
269 * c-exp.y (yylex): Rewrite to push all tokens onto the FIFO.
270 Handle FILENAME token.
272 2013-03-21 Tom Tromey <tromey@redhat.com>
274 * c-exp.y (YYPRINT): Define.
275 (c_print_token): New function.
277 2013-03-21 Tom Tromey <tromey@redhat.com>
279 * c-exp.y (%union) <sym, ivar, ivec>: Remove.
281 2013-03-21 Yao Qi <yao@codesourcery.com>
283 * ctf.c: Include "gdb_stat.h".
284 [USE_WIN32API]: New macro 'mkdir'.
285 (ctf_start): Use permission bits macros if they are defined.
287 2013-03-20 Keith Seitz <keiths@redhat.com>
289 * breakpoint.h (struct breakpoint): Add comment to
290 extra_string indicating that this member is mallod'd.
291 * breakpoint.c (base_breakpoint_dtor): Free extra_string.
293 2013-03-20 Pedro Alves <palves@redhat.com>
297 * cli/cli-setshow.c (do_set_command)
298 <var_uinteger, var_zuinteger>: Use LONGEST for variable holding
299 the result of parsing the command argument. Throw error if the
300 value is greater than UINT_MAX. Print the invalid value with
302 <var_integer, var_zinteger>: Use LONGEST for variable holding the
303 result of parsing the command argument. Throw error if the value
304 is greater than INT_MAX, not greater or equal. Also throw error
305 if the value is less than INT_MIN. Print the invalid value with
307 <var_zuinteger_unlimited>: Throw error if the value is greater
308 than INT_MAX, not greater or equal.
309 (do_show_command) <var_integer, var_zinteger,
310 var_zuinteger_unlimited>: Use %d for printing int, not %u.
312 2013-03-20 Tom Tromey <tromey@redhat.com>
314 * ax-gdb.c (gen_var_ref): Unconditionally call via computed ops,
316 * dwarf2read.c (read_func_scope): Remove old FIXME.
317 * eval.c (evaluate_subexp_standard): Check SYMBOL_COMPUTED_OPS,
319 * findvar.c (symbol_read_needs_frame, default_read_var_value):
320 Unconditionally call via computed ops, if possible.
321 * printcmd.c (address_info): Unconditionally call via computed ops,
323 * stack.c (read_frame_arg): Unconditionally call via computed ops,
325 * symtab.c (register_symbol_computed_impl): Sanity check 'ops'.
326 * tracepoint.c (scope_info): Unconditionally call via computed ops,
329 2013-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
330 Tom Tromey <tromey@redhat.com>
333 * coffread.c (coff_register_index): New global.
334 (process_coff_symbol, coff_read_enum_type): Set
336 (_initialize_coffread): Initialize new global.
337 * dwarf2loc.c (locexpr_find_frame_base_location)
338 (dwarf2_block_frame_base_locexpr_funcs)
339 (loclist_find_frame_base_location)
340 (dwarf2_block_frame_base_loclist_funcs): New.
341 (dwarf_expr_frame_base_1): Call SYMBOL_BLOCK_OPS, remove internal_error.
342 (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Add location_has_loclist.
343 * dwarf2loc.h (dwarf2_block_frame_base_locexpr_funcs)
344 (dwarf2_block_frame_base_loclist_funcs): New.
345 * dwarf2read.c (dwarf2_locexpr_index, dwarf2_loclist_index)
346 (dwarf2_locexpr_block_index, dwarf2_loclist_block_index): New
348 (read_func_scope): Update.
349 (fixup_go_packaging, mark_common_block_symbol_computed)
350 (var_decode_location, new_symbol_full, dwarf2_const_value):
351 Set SYMBOL_ACLASS_INDEX.
352 (dwarf2_symbol_mark_computed): Likewise. Add 'is_block' argument.
353 (_initialize_dwarf2_read): Initialize new globals.
354 * jit.c (finalize_symtab): Set SYMBOL_ACLASS_INDEX.
355 * jv-lang.c (add_class_symbol): Set SYMBOL_ACLASS_INDEX.
356 * mdebugread.c (mdebug_register_index, mdebug_regparm_index): New
358 (parse_symbol, psymtab_to_symtab_1): Set SYMBOL_ACLASS_INDEX.
359 (_initialize_mdebugread): Initialize new globals.
360 * psympriv.h (struct partial_symbol) <aclass>: Update comment.
361 * stabsread.c (patch_block_stabs): Set SYMBOL_ACLASS_INDEX.
362 (stab_register_index, stab_regparm_index): New globals.
363 (define_symbol, read_enum_type, common_block_end): Set
365 (_initialize_stabsread): Initialize new globals.
366 * symtab.c (next_aclass_value, symbol_impl, symbol_impls): New
368 (MAX_SYMBOL_IMPLS): New define.
369 (register_symbol_computed_impl, register_symbol_block_impl)
370 (register_symbol_register_impl)
371 (initialize_ordinary_address_classes): New functions.
372 (_initialize_symtab): Call initialize_ordinary_address_classes.
373 * symtab.h (enum address_class) <LOC_FINAL_VALUE>: New constant.
374 (struct symbol_impl): New.
375 (SYMBOL_ACLASS_BITS): New define.
376 (struct symbol) <aclass, ops>: Remove fields.
377 <aclass_index>: New field.
378 (symbol_impls): Declare.
379 (SYMBOL_CLASS, SYMBOL_COMPUTED_OPS, SYMBOL_REGISTER_OPS): Redefine.
380 (SYMBOL_IMPL, SYMBOL_ACLASS_INDEX): New defines.
381 (register_symbol_computed_impl, register_symbol_block_impl)
382 (register_symbol_register_impl): Declare.
383 (struct symbol_computed_ops): Add location_has_loclist.
384 (struct symbol_block_ops): New.
385 (SYMBOL_BLOCK_OPS): New.
386 * xcoffread.c (process_xcoff_symbol): Set SYMBOL_ACLASS_INDEX.
388 2013-03-20 Tom Tromey <tromey@redhat.com>
390 * psymtab.c (find_pc_sect_psymbol, fixup_psymbol_section)
391 (print_partial_symbols, recursively_search_psymtabs): Use
394 2013-03-20 Pierre Muller <muller@sourceware.org>
396 * contrib/ari/gdb_ari.sh (OP eol rule): Also check
397 addtion, subtraction, multiplication and division binary operator.
399 2013-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
402 * bfd-target.c (target_bfd_xclose): Remove parameter quitting.
403 * bsd-kvm.c (bsd_kvm_close): Likewise.
404 * bsd-uthread.c (bsd_uthread_close): Likewise.
405 * corelow.c (core_close): Likewise.
406 (core_close_cleanup): Remove parameter quitting from a caller.
407 * event-top.c (async_disconnect): Likewise.
408 * exec.c (exec_close_1): Remove parameter quitting.
409 * go32-nat.c (go32_close): Likewise.
410 * linux-nat.c (linux_nat_close): Remove parameter quitting. Remove
411 parameter quitting from a caller.
412 * mips-linux-nat.c (super_close): Remove parameter quitting from the
414 (mips_linux_close): Remove parameter quitting. Remove parameter
415 quitting from a caller.
416 * monitor.c (monitor_close): Remove parameter quitting.
417 * monitor.h (monitor_close): Likewise.
418 * record-btrace.c (record_btrace_close): Likewise.
419 * record-full.c (record_full_close): Likewise.
420 * remote-m32r-sdi.c (m32r_close): Remove parameter quitting and remove
421 it also from fprintf_unfiltered.
422 * remote-mips.c (mips_close): Remove parameter quitting.
423 (mips_detach): Remove parameter quitting from a caller.
424 * remote-sim.c (gdbsim_close): Remove parameter quitting.
425 (gdbsim_close): Remove duplicate function comment. Remove parameter
426 quitting and remove it also from printf_filtered.
427 * remote.c (remote_close): Remove parameter quitting.
428 * solib-svr4.c (enable_break): Remove parameter quitting from a caller.
429 * target.c (update_current_target): Remove parameter int from to_close
431 (push_target, unpush_target, pop_target): Remove parameter quitting from
433 (pop_all_targets_above, pop_all_targets): Remove parameter quitting.
434 Remove parameter quitting from a caller.
435 (target_preopen): Remove parameter quitting from a caller.
436 (target_close): Remove parameter quitting. Remove parameter quitting
437 from a caller two times. Remove parameter quitting also from
439 * target.h (struct target_ops): Remove parameter quitting and as int
440 from fields to_xclose and to_close.
441 (extern struct target_ops current_target):
442 (target_close, pop_all_targets): Remove parameter quitting. Update the
444 (pop_all_targets_above): Remove parameter quitting.
445 * top.c (quit_target): Remove parameter quitting from a caller.
446 * tracepoint.c (tfile_close): Remove parameter quitting.
447 * windows-nat.c (windows_close): Remove parameter quitting.
449 2013-03-20 Corinna Vinschen <vinschen@redhat.com>
451 * windows-nat.c (handle_output_debug_string): Replace call
452 to string_to_core_addr with call to strtoull.
454 2013-03-20 Yao Qi <yao@codesourcery.com>
456 * ctf.c (ctf_save_metadata_header): Define macro HOST_ENDIANNESS
457 and write it to CTF metadata.
459 2013-03-19 Corinna Vinschen <vinschen@redhat.com>
461 * windows-nat.c (handle_output_debug_string): Change type of n to
462 SIZE_T to avoid crash on 64 bit systems.
464 2013-03-17 Eli Zaretskii <eliz@gnu.org>
466 * python/python-internal.h (HAVE_SNPRINTF)
467 [_WIN32 && HAVE_DECL_SNPRINTF]: Define, to avoid compiler warnings
468 about redefinition of snprintf by pyerrors.h.
470 2013-03-15 Steve Ellcey <sellcey@mips.com>
472 * remote-sim.c (sim_command_completer): Make char arguments const.
474 2013-03-15 Tom Tromey <tromey@redhat.com>
477 * gdbtypes.c (types_equal): Handle TYPE_CODE_FUNC.
479 2013-03-14 Tom Tromey <tromey@redhat.com>
481 * gdb_bfd.c (struct gdb_bfd_data) <crc_computed, crc>:
483 (get_file_crc): Move from symfile.c.
484 (gdb_bfd_crc): New function.
485 * gdb_bfd.h (gdb_bfd_crc): Declare.
486 * objfiles.h (struct objfile) <crc32, crc32_p>: Remove.
487 * symfile.c (get_file_crc): Move to gdb_bfd.c.
488 (separate_debug_file_exists): Use gdb_bfd_crc.
490 2013-03-14 Tom Tromey <tromey@redhat.com>
492 * symfile.c (get_debug_link_info): Remove.
493 (find_separate_debug_file_by_debuglink): Use
494 bfd_get_debug_link_info.
496 2013-03-14 Tom Tromey <tromey@redhat.com>
498 * symtab.c (error_in_psymtab_expansion): New function.
499 (lookup_symbol_aux_quick)
500 (basic_lookup_transparent_type_quick): Remove "last resort"
501 code. Use error_in_psymtab_expansion.
503 2013-03-14 Doug Evans <dje@google.com>
504 Jan Kratochvil <jan.kratochvil@redhat.com>
506 * dwarf2read.c (dw2_map_symtabs_matching_filename): Put continue after
507 any successful compare_filenames_for_search or FILENAME_CMP.
508 * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
509 * symtab.c (iterate_over_some_symtabs): Likewise.
511 2013-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
513 * source.c (print_source_lines_base): Make a local copy of
516 2013-03-14 Hui Zhu <hui_zhu@mentor.com>
517 Jan Kratochvil <jan.kratochvil@redhat.com>
519 * source.c (print_source_lines_base): Suppress "file" for TUI.
521 2013-03-14 Keith Seitz <keiths@redhat.com>
522 Alan Matsuoka <alanm@redhat.com>
526 * cp-namespace.c (cp_lookup_nested_symbol): Handle TYPE_CODE_FUNC and
528 * elfread.c (elf_symtab_read): Handle BSF_GNU_UNIQUE for certain
531 2013-03-14 Yao Qi <yao@codesourcery.com>
533 * tracepoint.c (tfile_write_status): Write 'stop_desc' of trace
534 status to tfile if trace is stopped by command 'tstop'.
536 2013-03-14 Yao Qi <yao@codesourcery.com>
538 * tracepoint.c (tfile_write_status): Write trace notes and user
539 name into tfile if they are not NULL.
541 2013-03-14 Hui Zhu <hui@codesourcery.com>
542 Yao Qi <yao@codesourcery.com>
544 * Makefile.in (REMOTE_OBS): Add ctf.o.
546 (HFILES_NO_SRCDIR): Add ctf.h.
547 * ctf.c, ctf.h: New files.
548 * tracepoint.c: Include 'ctf.h'.
549 (collect_pseudocommand): Remove static.
550 (trace_save_command): Parse option "-ctf".
551 Produce different trace file writers per option.
552 Adjust output message.
553 (trace_save_tfile, trace_save_ctf): New.
554 * tracepoint.h (trace_save_tfile, trace_save_ctf): Declare.
555 * mi/mi-main.c: Include 'ctf.h'.
556 (mi_cmd_trace_save): Handle option '-ctf'. Call either
557 trace_save_tfile or trace_save_ctf.
558 * NEWS: Mention these changes.
560 2013-03-14 Yao Qi <yao@codesourcery.com>
562 * tracepoint.c (trace_file_writer_xfree): New.
563 (struct tfile_writer_data): New.
564 (tfile_dtor, tfile_can_target_save, tfile_start): New.
565 (tfile_write_header, tfile_write_regblock_type): New.
566 (tfile_write_status, tfile_write_uploaded_tsv): New.
567 (tfile_write_uploaded_tp, tfile_write_definition_end): New.
568 (tfile_write_raw_data, (tfile_end): New.
569 (tfile_write_ops): New global variable.
570 (TRACE_WRITE_R_BLOCK): New macro.
571 (TRACE_WRITE_M_BLOCK_HEADER): New macro.
572 (TRACE_WRITE_M_BLOCK_MEMORY): New macro.
573 (TRACE_WRITE_V_BLOCK): New macro.
574 (trace_save): Add extra one parameter WRITER. Make it static.
575 Use WRITER to writer trace.
576 (tfile_trace_file_writer_new): New.
577 (trace_save_command): Caller update.
578 (trace_save_tfile): Write trace data in TFILE format.
579 * tracepoint.h (struct trace_frame_write_ops): New.
580 (struct trace_file_write_ops): New.
581 (struct trace_file_writer): New.
582 (trace_save): Remove its declaration.
583 (trace_save_tfile): Declare it.
584 * mi/mi-main.c (mi_cmd_trace_save): Call trace_save_tfile
585 instead of trace_save.
587 2013-03-13 Pedro Alves <palves@redhat.com>
589 * hppa-hpux-nat.c (hppa_hpux_save_state_offset): Make static.
591 2013-03-13 Pedro Alves <palves@redhat.com>
593 * dbxread.c (read_ofile_symtab, process_one_symbol): Remove
595 * demangle.c (current_demangling_style_string): Make it const.
596 (set_demangling_command): Assert the demangling style is known.
597 Remove all handling of unknown styles. Set
598 'current_demangling_style_string' to an element of the
599 demangling_style_names array.
600 (set_demangling_style): Delete.
601 (_initialize_demangler): Set current_demangling_style_string to the
602 element of the demangling_style_names array that corresponds to
603 the default demangling style. Remove FIXME note. Don't call
604 set_demangling_style.
605 * gdb-demangle.h (set_demangling_style): Remove declaration.
607 2013-03-13 Pedro Alves <palves@redhat.com>
609 * ada-lang.c (struct add_partial_datum) <text, text0, word>: Make
611 (ada_make_symbol_completion_list): Make "text0" parameter const.
612 * ax-gdb.c (agent_eval_command_one): Make "exp" parameter const.
613 * breakpoint.c (condition_completer): Make "text" and "word"
614 parameters const. Adjust.
615 (check_tracepoint_command): Adjust to validate_actionline
617 (catch_syscall_completer): Make "text" and "word" parameters
619 * cli/cli-cmds.c (show_user): Make "comname" local const.
620 (valid_command_p): Make "command" parameter const.
621 (alias_command): Make "alias_prefix" and "command_prefix" locals
623 * cli/cli-decode.c (add_cmd): Make "name" parameter const.
624 (add_alias_cmd): Make "name" and "oldname" parameters const.
625 Adjust. No longer make copy of OLDNAME.
626 (add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd)
627 (add_setshow_cmd_full, add_setshow_enum_cmd)
628 (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
629 (add_setshow_filename_cmd, add_setshow_string_cmd)
630 (add_setshow_string_noescape_cmd)
631 (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
632 (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
633 (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd)
634 (delete_cmd, add_info, add_info_alias, add_com, add_com_alias):
635 Make "name" parameter const.
636 (help_cmd): Rename "command" parameter to "arg". New const local
638 (find_cmd): Make "command" parameter const.
639 (lookup_cmd_1): Make "text" parameter pointer to const. Adjust to
640 deprecated_cmd_warning prototype change.
641 (undef_cmd_error): Make "cmdtype" parameter const.
642 (lookup_cmd): Make "line" parameter const.
643 (deprecated_cmd_warning): Change type of "text" parameter to
644 pointer to const char, from pointer to pointer to char. Adjust.
645 (lookup_cmd_composition): Make "text" parameter const.
646 (complete_on_cmdlist, complete_on_enum): Make "text" and "word"
648 * cli/cli-decode.h (struct cmd_list_element) <name>: Make field
650 * cli/cli-script.c (validate_comname): Make "tem" local const.
651 (define_command): New const local "tem_c". Use it in calls to
653 (document_command): Make "tem" and "comfull" locals const.
654 (show_user_1): Make "prefix" and "name" parameters const.
655 * cli-script.h (show_user_1): Make "prefix" and "name" parameters
657 * command.h (add_cmd, add_alias_cmd, add_prefix_cmd)
658 (add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1)
659 (deprecated_cmd_warning, lookup_cmd_composition, add_com)
660 (add_com_alias, add_info, add_info_alias, complete_on_cmdlist)
661 (complete_on_enum, add_setshow_enum_cmd)
662 (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
663 (add_setshow_filename_cmd, add_setshow_string_cmd)
664 (add_setshow_string_noescape_cmd)
665 (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
666 (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
667 (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
668 Change prototypes, constifying strings.
669 * completer.c (noop_completer, filename_completer): Make "text"
670 and "prefix" parameters const.
671 (location_completer, expression_completer)
672 (complete_line_internal): Make "text" and "prefix" parameters
674 (command_completer, signal_completer): Make "text" and "prefix"
676 * completer.h (noop_completer, filename_completer)
677 (expression_completer, location_completer, command_completer)
678 (signal_completer): Change prototypes.
679 * corefile.c (complete_set_gnutarget): Make "text" and "word"
681 * cp-abi.c (cp_abi_completer): Likewise.
682 * expression.h (parse_expression_for_completion): Change
684 * f-lang.c (f_make_symbol_completion_list): Make "text" and "word"
686 * infcmd.c (_initialize_infcmd): Make "cmd_name" local const.
687 * infrun.c (handle_completer): Make "text" and "word" parameters
689 * interps.c (interpreter_completer): Make "text" and "word"
691 * language.h (struct language_defn)
692 <la_make_symbol_completion_list>: Make "text" and "word"
694 * parse.c (parse_exp_1): Move const hack to parse_exp_in_context.
695 (parse_exp_in_context): Rename to ...
696 (parse_exp_in_context_1): ... this.
697 (parse_exp_in_context): Reimplement, with const hack from
699 (parse_expression_for_completion): Make "string" parameter const.
700 * printcmd.c (decode_format): Make "string_ptr" parameter pointer
701 to pointer to const char. Adjust.
702 (print_command_1): Make "exp" parameter const.
703 (output_command): Rename to ...
704 (output_command_const): ... this. Make "exp" parameter const.
705 (output_command): Reimplement.
707 (display_command): Rename "exp" parameter to "arg". New "exp"
708 local, const version of "arg".
709 * python/py-auto-load.c (gdbpy_initialize_auto_load): Make
710 "cmd_name" local const.
711 * python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree
713 (cmdpy_completer): Make "text" and "word" parameters const.
714 (gdbpy_parse_command_name): Make "prefix_text2" local const.
715 * python/py-param.c (add_setshow_generic): Make "tmp_name" local
717 * remote.c (_initialize_remote): Make "cmd_name" local const.
718 * symtab.c (language_search_unquoted_string): Make "text" and "p"
719 parameters const. Adjust.
720 (completion_list_add_fields): Make "sym_text", "text" and "word"
722 (struct add_name_data) <sym_text, text, word>: Make fields const.
723 (default_make_symbol_completion_list_break_on): Make "text" and
724 "word" parameters const. Adjust locals.
725 (default_make_symbol_completion_list)
726 (make_symbol_completion_list, make_symbol_completion_type)
727 (make_symbol_completion_list_fn): Make "text" and "word"
729 (make_file_symbol_completion_list): Make "text", "word" and
730 "srcfile" parameters const. Adjust locals.
731 (add_filename_to_list): Make "text" and "word" parameters const.
732 (struct add_partial_filename_data) <text, word>: Make fields
734 (make_source_files_completion_list): Make "text" and "word"
736 * symtab.h (default_make_symbol_completion_list_break_on)
737 (default_make_symbol_completion_list, make_symbol_completion_list)
738 (make_symbol_completion_type enum type_code)
739 (make_symbol_completion_list_fn make_file_symbol_completion_list)
740 (make_source_files_completion_list): Change prototype.
741 * top.c (execute_command): Adjust to pass pointer to pointer to
742 const char to lookup_cmd, and to deprecated_cmd_warning prototype
744 (set_verbose): Make "cmdname" local const.
745 * tracepoint.c (decode_agent_options): Make "exp" parameter const,
747 (validate_actionline): Make "line" parameter a pointer to const
749 (encode_actions_1): Make "action_exp" local const, and adjust.
750 (encode_actions): Adjust.
751 (replace_comma): Delete.
752 (trace_dump_actions): Make "action_exp" and "next_comma" locals
753 const, and adjust. Don't frob the action string while splitting
754 it at commas. Instead, make a copy of each split substring in
756 (trace_dump_command): Adjust to validate_actionline prototype
758 * tracepoint.h (decode_agent_options, decode_agent_options)
759 (encode_actions, validate_actionline): Change prototypes.
760 * valprint.h (output_command): Delete declaration.
761 (output_command_const): Declare.
762 * value.c (function_destroyer): Cast const away in xfree call.
764 2013-03-13 Pedro Alves <palves@redhat.com>
766 * ada-lang.c (ada_decode_symbol): Cast away constness of GSYMBOL
767 rather than casting 'const char * const *' to 'const char **'.
768 * ada-lex.l (processInt): Make "trailer" local const. Remove
769 'const char **' cast.
770 * arm-linux-tdep.c (arm_stap_parse_special_token): Add 'char *'
771 locals, and use those as strtol output pointer, instead than doing
772 invalid casts to from 'const char **' to 'char **'.
773 (_initialize_demangle): Remove cast.
774 * i386-tdep.c (i386_stap_parse_special_token): : Add 'char *'
775 locals, and use those as strtol output pointer, instead than doing
776 invalid casts to from 'const char **' to 'char **'.
777 * solib-dsbt.c (dsbt_get_initial_loadmaps): Remove 'gdb_byte**'
779 * stap-probe.c (stap_parse_register_operand)
780 (stap_parse_single_operand): Likewise.
782 2013-03-13 Yao Qi <yao@codesourcery.com>
784 * tracepoint.c (tfile_get_trace_state_variable_value): Look for
785 the last matched 'V' blcok in trace frame.
787 2013-03-12 Joel Brobecker <brobecker@adacore.com>
789 * NEWS: Create a new section for the next release branch.
790 Rename the section of the current branch, now that it has
793 2013-03-12 Joel Brobecker <brobecker@adacore.com>
795 GDB 7.6 branch created (branch timestamp: 2013-03-12 22:15 UTC)
796 * version.in: Bump version to 7.6.50.20130312-cvs.
798 2013-03-12 Keith Seitz <keiths@redhat.com>
800 * mi/mi-cmds.h (mi_execute_command): Make "cmd" const.
801 * mi/mi-interp.c (mi_interpreter_exec): Make "command" const.
802 Remove temporary copy of input string.
803 (mi_execute_command_wrapper): Make "cmd" const.
804 * mi/mi-main.c (mi_execute_command): Make "string_ptr" const.
805 * mi/mi-parse.c (mi_parse_argv): Make "args" const.
807 (mi_parse): Make "cmd" const.
809 * mi/mi-parse.h (mi_parse): Make "cmd" const.
811 2013-03-12 Keith Seitz <keiths@redhat.com>
813 * ada-lang.c (ada_read_renaming_var_value): Pass const
814 pointer to expression string to parse_exp_1.
815 (create_excep_cond_exprs): Likewise.
816 * ax-gdb.c (agent_eval_command_one): Likewise.
817 (maint_agent_printf_command): Likewise.
818 Constify much of the string handling/parsing.
819 * breakpoint.c (set_breakpoint_condition): Pass const
820 pointer to expression string to parse_exp_1.
821 (update_watchpoint): Likewise.
822 (parse_cmd_to_aexpr): Constify string handling.
823 Pass const pointer to parse_exp_1.
824 (init_breakpoint_sal): Pass const pointer to parse_exp_1.
825 (find_condition_and_thread): Likewise.
827 (watch_command_1): Make "arg" const.
828 Constify string handling.
829 Copy the expression string instead of changing the input
831 (update_breakpoint_location): Pass const pointer to
833 * eval.c (parse_and_eval_address): Make "exp" const.
834 (parse_to_comma_and_eval): Make "expp" const.
835 (parse_and_eval): Make "exp" const.
836 * expression.h (parse_expression): Make argument const.
837 (parse_exp_1): Make first argument const.
838 * findcmd.c (parse_find_args): Treat "args" as const.
839 * linespec.c (parse_linespec): Pass const pointer to
840 linespec_expression_to_pc.
841 (linespec_expression_to_pc): Make "exp_ptr" const.
842 * parse.c (parse_exp_1): Make "stringptr" const.
843 Make a copy of the expression to pass to parse_exp_in_context until
844 this whole interface can be constified.
845 (parse_expression): Make "string" const.
846 * printcmd.c (ui_printf): Treat "arg" as const.
847 Handle const strings.
848 * tracepoint.c (validate_actionline): Pass const pointer to
849 all calls to parse_exp_1.
850 (encode_actions_1): Likewise.
851 * value.h (parse_to_comma_and_eval): Make argument const.
852 (parse_and_eval_address): Likewise.
853 (parse_and_eval): Likewise.
854 * varobj.c (varobj_create): Pass const pointer to parse_exp_1.
855 (varobj_set_value): Likewise.
856 * cli/cli-cmds.c (disassemble_command): Treat "arg" as const and
857 constify string handling.
858 Pass const pointers to parse_and_eval_address and
859 parse_to_comman_and_eval.
860 * cli/cli-utils.c (skip_to_space): Rename to ...
861 (skip_to_space_const): ... this. Handle const strings.
862 * cli/cli-utils.h (skip_to_space): Turn into macro which invokes
864 (skip_to_space_const): Declare.
865 * common/format.c (parse_format_string): Make "arg" const.
866 Handle const strings.
867 * common/format.h (parse_format_string): Make "arg" const.
868 * gdbserver/ax.c (ax_printf): Make "format" const.
869 * python/python.c (gdbpy_parse_and_eval): Do not make a copy
870 of the expression string.
872 2013-03-12 Hui Zhu <hui@codesourcery.com>
874 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Update error message.
876 2013-03-12 Yao Qi <yao@codesourcery.com>
877 Hui Zhu <hui@codesourcery.com>
879 * dwarf2loc.c (access_memory): Change nbits to nbytes in gdb_assert.
880 (dwarf2_compile_expr_to_ax): Call access_memory in DW_OP_deref and
883 2013-03-12 Paul Hilfinger <hilfingr@adacore.com>
885 * ada-lex.l (rules): Only recognize 'thread' as a
886 delimiter when followed by numerals, as for c-exp.y.
887 Use new rewind_to_char function to rewind the input for
888 expression-delimiting tokens.
889 (rewind_to_char): New function.
891 2013-03-11 Pedro Alves <palves@redhat.com>
892 Jan Kratochvil <jan.kratochvil@redhat.com>
894 * configure: Regenerate.
895 * configure.ac (check dynamic export flag): Link python test with
898 2013-03-11 Doug Evans <dje@google.com>
899 Keith Seitz <keiths@redhat.com>
901 * linespec.c (find_linespec_symbols): Call find_function_symbols
902 first, and then call lookup_prefix_sym/find_method.
904 2013-03-11 Pedro Alves <palves@redhat.com>
906 * charset.c (convert_between_encodings): Don't cast between
907 different pointer to pointer types. Instead, make the 'inp' local
908 be of the type iconv expects.
909 (wchar_iterate): Don't cast between different pointer to pointer
910 types. Instead, use new pointer local of the type iconv expects.
911 * target.c (target_read_stralloc, target_fileio_read_stralloc):
912 Add new local of type char pointer, and use it to get a
913 char/string view of the byte buffer, instead of casting between
914 pointer to pointer types.
916 2013-03-11 Hafiz Abid Qadeer <abidh@codesourcery.com>
918 * remote.c (remote_set_trace_buffer_size): Move != operator
919 to the start of next line to fix an ARI warning.
921 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
923 * NEWS: Add record changes.
925 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
927 * record-btrace.c (btrace_insn_history): Omit the pc prefix in
928 the instruction history disassembly.
929 * disasm.c (dump_insns): Omit the pc prefix, if requested.
930 * disasm.h (DISASSEMBLY_OMIT_PC): New.
932 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
934 * Makefile.in (SFILES): Add record-btrace.c
935 (COMMON_OBS): Add record-btrace.o
936 * record-btrace.c: New.
937 * objfiles.c: Include btrace.h.
938 (free_objfile): call btrace_free_objfile.
940 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
942 * target.c (target_call_history, target_call_history_from,
943 target_call_history_range): New.
944 * target.h (target_ops) <to_call_history, to_call_history_from,
945 to_call_history_range>: New fields.
946 (target_call_history, target_call_history_from,
947 target_call_history_range): New declaration.
948 * record.c (get_call_history_modifiers, cmd_record_call_history,
949 record_call_history_size): New.
950 (_initialize_record): Add the "record function-call-history" command.
951 Add "set/show record function-call-history-size" commands.
952 * record.h (record_print_flag): New.
954 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
956 * target.h (target_ops) <to_insn_history, to_insn_history_from,
957 to_insn_history_range>: New fields.
958 (target_insn_history): New.
959 (target_insn_history_from): New.
960 (target_insn_history_range): New.
961 * target.c (target_insn_history): New.
962 (target_insn_history_from): New.
963 (target_insn_history_range): New.
964 * record.c: Include cli/cli-utils.h, disasm.h, ctype.h.
965 (record_insn_history_size): New.
966 (get_insn_number): New.
967 (get_context_size): New.
969 (get_insn_history_modifiers): New.
970 (cmd_record_insn_history): New.
971 (_initialize_record): Add "set/show record instruction-history-size"
972 command. Add "record instruction-history" command.
974 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
976 * record.h (record_disconnect): New.
977 (record_detach): New.
978 (record_mourn_inferior): New.
980 * record-full.c (record_disconnect, record_detach,
981 record_mourn_inferior, record_kill): Move to...
985 (record_unpush): New.
986 (cmd_record_stop): Call record_stop. Replace unpush_target
987 call with record_unpush call.
988 (record_disconnect, record_detach): Assert that the target
989 is of record stratum. Call record_unpush, record_stop, and
991 (record_mourn_inferior, record_kill): Assert that the target
992 is of record stratum. Call record_unpush and DEBUG.
994 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
996 * record-full.h, record-full.c (record_memory_query): Rename
998 (record_full_memory_query): ...this. Update all users.
999 (record_arch_list_add_reg): Rename to ...
1000 (record_full_arch_list_add_reg): ...this. Update all users.
1001 (record_arch_list_add_mem): Rename to ...
1002 (record_full_arch_list_add_mem): ...this. Update all users.
1003 (record_arch_list_add_end): Rename to ...
1004 (record_full_arch_list_add_end): ...this. Update all users.
1005 (record_gdb_operation_disable_set): Rename to ...
1006 (record_full_gdb_operation_disable_set): ...this.
1009 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1011 * record-full.c (DEFAULT_RECORD_INSN_MAX_NUM): Renamed to ...
1012 (DEFAULT_RECORD_FULL_INSN_MAX_NUM): ... this. Updated all users.
1013 (RECORD_IS_REPLAY): Renamed to ...
1014 (RECORD_FULL_IS_REPLAY): ... this. Updated all users.
1015 (RECORD_FILE_MAGIC): Renamed to ...
1016 (RECORD_FULL_FILE_MAGIC): ... this. Updated all users.
1017 (record_mem_entry): Renamed to ...
1018 (record_full_mem_entry): ... this. Updated all users.
1019 (record_reg_entry): Renamed to ...
1020 (record_full_reg_entry): ... this. Updated all users.
1021 (record_end_entry): Renamed to ...
1022 (record_full_end_entry): ... this. Updated all users.
1023 (record_type) <record_end, record_reg, record_mem>: Renamed
1025 (record_full_type) <record_full_end, record_full_reg,
1026 record_full_mem>: ... this. Updated all users.
1027 (record_entry): Renamed to ...
1028 (record_full_entry): ... this. Updated all users.
1029 (record_core_buf_entry): Renamed to ...
1030 (record_full_core_buf_entry): ... this. Updated all users.
1031 (record_core_regbuf): Renamed to ...
1032 (record_full_core_regbuf): ... this. Updated all users.
1033 (record_core_start): Renamed to ...
1034 (record_full_core_start): ... this. Updated all users.
1035 (record_core_end): Renamed to ...
1036 (record_full_core_end): ... this. Updated all users.
1037 (record_core_buf_list): Renamed to ...
1038 (record_full_core_buf_list): ... this. Updated all users.
1039 (record_first): Renamed to ...
1040 (record_full_first): ... this. Updated all users.
1041 (record_list): Renamed to ...
1042 (record_full_list): ... this. Updated all users.
1043 (record_arch_list_head): Renamed to ...
1044 (record_full_arch_list_head): ... this. Updated all users.
1045 (record_arch_list_tail): Renamed to ...
1046 (record_full_arch_list_tail): ... this. Updated all users.
1047 (record_stop_at_limit): Renamed to ...
1048 (record_full_stop_at_limit): ... this. Updated all users.
1049 (record_insn_max_num): Renamed to ...
1050 (record_full_insn_max_num): ... this. Updated all users.
1051 (record_insn_num): Renamed to ...
1052 (record_full_insn_num): ... this. Updated all users.
1053 (record_insn_count): Renamed to ...
1054 (record_full_insn_count): ... this. Updated all users.
1055 (record_ops): Renamed to ...
1056 (record_full_ops): ... this. Updated all users.
1057 (record_core_ops): Renamed to ...
1058 (record_full_core_ops): ... this. Updated all users.
1059 (set_record_cmdlist): Renamed to ...
1060 (set_record_full_cmdlist): ... this. Updated all users.
1061 (show_record_cmdlist): Renamed to ...
1062 (show_record_full_cmdlist): ... this. Updated all users.
1063 (record_cmdlist): Renamed to ...
1064 (record_full_cmdlist): ... this. Updated all users.
1065 (record_beneath_to_resume_ops): Renamed to ...
1066 (record_full_beneath_to_resume_ops): ... this. Updated all users.
1067 (record_beneath_to_resume): Renamed to ...
1068 (record_full_beneath_to_resume): ... this. Updated all users.
1069 (record_beneath_to_wait_ops): Renamed to ...
1070 (record_full_beneath_to_wait_ops): ... this. Updated all users.
1071 (record_beneath_to_wait): Renamed to ...
1072 (record_full_beneath_to_wait): ... this. Updated all users.
1073 (record_beneath_to_store_registers_ops): Renamed to ...
1074 (record_full_beneath_to_store_registers_ops): ... this.
1076 (record_beneath_to_store_registers): Renamed to ...
1077 (record_full_beneath_to_store_registers): ... this.
1079 (record_beneath_to_xfer_partial_ops): Renamed to ...
1080 (record_full_beneath_to_xfer_partial_ops): ... this.
1082 (record_beneath_to_xfer_partial): Renamed to ...
1083 (record_full_beneath_to_xfer_partial): ... this.
1085 (record_beneath_to_insert_breakpoint): Renamed to ...
1086 (record_full_beneath_to_insert_breakpoint): ... this.
1088 (record_beneath_to_stopped_by_watchpoint): Renamed to ...
1089 (record_full_beneath_to_stopped_by_watchpoint): ... this.
1091 (record_beneath_to_stopped_data_address): Renamed to ...
1092 (record_full_beneath_to_stopped_data_address): ... this.
1094 (record_beneath_to_async): Renamed to ...
1095 (record_full_beneath_to_async): ... this. Updated all users.
1096 (record_goto_insn): Renamed to ...
1097 (record_full_goto_insn): ... this. Updated all users.
1098 (record_save): Renamed to ...
1099 (record_full_save): ... this. Updated all users.
1100 (record_reg_alloc): Renamed to ...
1101 (record_full_reg_alloc): ... this. Updated all users.
1102 (record_reg_release): Renamed to ...
1103 (record_full_reg_release): ... this. Updated all users.
1104 (record_mem_alloc): Renamed to ...
1105 (record_full_mem_alloc): ... this. Updated all users.
1106 (record_mem_release): Renamed to ...
1107 (record_full_mem_release): ... this. Updated all users.
1108 (record_end_alloc): Renamed to ...
1109 (record_full_end_alloc): ... this. Updated all users.
1110 (record_end_release): Renamed to ...
1111 (record_full_end_release): ... this. Updated all users.
1112 (record_entry_release): Renamed to ...
1113 (record_full_entry_release): ... this. Updated all users.
1114 (record_list_release): Renamed to ...
1115 (record_full_list_release): ... this. Updated all users.
1116 (record_list_release_following): Renamed to ...
1117 (record_full_list_release_following): ... this.
1119 (record_list_release_first): Renamed to ...
1120 (record_full_list_release_first): ... this. Updated all users.
1121 (record_arch_list_add): Renamed to ...
1122 (record_full_arch_list_add): ... this. Updated all users.
1123 (record_get_loc): Renamed to ...
1124 (record_full_get_loc): ... this. Updated all users.
1125 (record_check_insn_num): Renamed to ...
1126 (record_full_check_insn_num): ... this. Updated all users.
1127 (record_arch_list_cleanups): Renamed to ...
1128 (record_full_arch_list_cleanups): ... this. Updated all users.
1129 (record_message): Renamed to ...
1130 (record_full_message): ... this. Updated all users.
1131 (record_message_wrapper): Renamed to ...
1132 (record_full_message_wrapper): ... this. Updated all users.
1133 (record_message_wrapper_safe): Renamed to ...
1134 (record_full_message_wrapper_safe): ... this. Updated all users.
1135 (record_gdb_operation_disable): Renamed to ...
1136 (record_full_gdb_operation_disable): ... this. Updated all users.
1137 (record_hw_watchpoint): Renamed to ...
1138 (record_full_hw_watchpoint): ... this. Updated all users.
1139 (record_exec_insn): Renamed to ...
1140 (record_full_exec_insn): ... this. Updated all users.
1141 (record_restore): Renamed to ...
1142 (record_full_restore): ... this. Updated all users.
1143 (record_async_inferior_event_token): Renamed to ...
1144 (record_full_async_inferior_event_token): ... this.
1146 (record_async_inferior_event_handler): Renamed to ...
1147 (record_full_async_inferior_event_handler): ... this.
1149 (record_core_open_1): Renamed to ...
1150 (record_full_core_open_1): ... this. Updated all users.
1151 (record_open_1): Renamed to ...
1152 (record_full_open_1): ... this. Updated all users.
1153 (record_open): Renamed to ...
1154 (record_full_open): ... this. Updated all users.
1155 (record_close): Renamed to ...
1156 (record_full_close): ... this. Updated all users.
1157 (record_resume_step): Renamed to ...
1158 (record_full_resume_step): ... this. Updated all users.
1159 (record_resumed): Renamed to ...
1160 (record_full_resumed): ... this. Updated all users.
1161 (record_execution_dir): Renamed to ...
1162 (record_full_execution_dir): ... this. Updated all users.
1163 (record_resume): Renamed to ...
1164 (record_full_resume): ... this. Updated all users.
1165 (record_get_sig): Renamed to ...
1166 (record_full_get_sig): ... this. Updated all users.
1167 (record_sig_handler): Renamed to ...
1168 (record_full_sig_handler): ... this. Updated all users.
1169 (record_wait_cleanups): Renamed to ...
1170 (record_full_wait_cleanups): ... this. Updated all users.
1171 (record_wait_1): Renamed to ...
1172 (record_full_wait_1): ... this. Updated all users.
1173 (record_wait): Renamed to ...
1174 (record_full_wait): ... this. Updated all users.
1175 (record_stopped_by_watchpoint): Renamed to ...
1176 (record_full_stopped_by_watchpoint): ... this. Updated all users.
1177 (record_disconnect): Renamed to ...
1178 (record_full_disconnect): ... this. Updated all users.
1179 (record_detach): Renamed to ...
1180 (record_full_detach): ... this. Updated all users.
1181 (record_mourn_inferior): Renamed to ...
1182 (record_full_mourn_inferior): ... this. Updated all users.
1183 (record_kill): Renamed to ...
1184 (record_full_kill): ... this. Updated all users.
1185 (record_stopped_data_address): Renamed to ...
1186 (record_full_stopped_data_address): ... this. Updated all users.
1187 (record_registers_change): Renamed to ...
1188 (record_full_registers_change): ... this. Updated all users.
1189 (record_store_registers): Renamed to ...
1190 (record_full_store_registers): ... this. Updated all users.
1191 (record_xfer_partial): Renamed to ...
1192 (record_full_xfer_partial): ... this. Updated all users.
1193 (record_breakpoint): Renamed to ...
1194 (record_full_breakpoint): ... this. Updated all users.
1195 (record_breakpoint_p): Renamed to ...
1196 (record_full_breakpoint_p): ... this. Updated all users.
1197 (record_breakpoints): Renamed to ...
1198 (record_full_breakpoints): ... this. Updated all users.
1199 (record_sync_record_breakpoints): Renamed to ...
1200 (record_full_sync_record_breakpoints): ... this.
1202 (record_init_record_breakpoints): Renamed to ...
1203 (record_full_init_record_breakpoints): ... this.
1205 (record_insert_breakpoint): Renamed to ...
1206 (record_full_insert_breakpoint): ... this. Updated all users.
1207 (record_remove_breakpoint): Renamed to ...
1208 (record_full_remove_breakpoint): ... this. Updated all users.
1209 (record_can_execute_reverse): Renamed to ...
1210 (record_full_can_execute_reverse): ... this. Updated all users.
1211 (record_get_bookmark): Renamed to ...
1212 (record_full_get_bookmark): ... this. Updated all users.
1213 (record_goto_bookmark): Renamed to ...
1214 (record_full_goto_bookmark): ... this. Updated all users.
1215 (record_async): Renamed to ...
1216 (record_full_async): ... this. Updated all users.
1217 (record_can_async_p): Renamed to ...
1218 (record_full_can_async_p): ... this. Updated all users.
1219 (record_is_async_p): Renamed to ...
1220 (record_full_is_async_p): ... this. Updated all users.
1221 (record_execution_direction): Renamed to ...
1222 (record_full_execution_direction): ... this. Updated all users.
1223 (record_info): Renamed to ...
1224 (record_full_info): ... this. Updated all users.
1225 (record_delete): Renamed to ...
1226 (record_full_delete): ... this. Updated all users.
1227 (record_is_replaying): Renamed to ...
1228 (record_full_is_replaying): ... this. Updated all users.
1229 (record_goto_entry): Renamed to ...
1230 (record_full_goto_entry): ... this. Updated all users.
1231 (record_goto_begin): Renamed to ...
1232 (record_full_goto_begin): ... this. Updated all users.
1233 (record_goto_end): Renamed to ...
1234 (record_full_goto_end): ... this. Updated all users.
1235 (record_goto): Renamed to ...
1236 (record_full_goto): ... this. Updated all users.
1237 (init_record_ops): Renamed to ...
1238 (init_record_full_ops): ... this. Updated all users.
1239 (record_core_resume): Renamed to ...
1240 (record_full_core_resume): ... this. Updated all users.
1241 (record_core_kill): Renamed to ...
1242 (record_full_core_kill): ... this. Updated all users.
1243 (record_core_fetch_registers): Renamed to ...
1244 (record_full_core_fetch_registers): ... this. Updated all users.
1245 (record_core_prepare_to_store): Renamed to ...
1246 (record_full_core_prepare_to_store): ... this. Updated all users.
1247 (record_core_store_registers): Renamed to ...
1248 (record_full_core_store_registers): ... this. Updated all users.
1249 (record_core_xfer_partial): Renamed to ...
1250 (record_full_core_xfer_partial): ... this. Updated all users.
1251 (record_core_insert_breakpoint): Renamed to ...
1252 (record_full_core_insert_breakpoint): ... this. Updated all users.
1253 (record_core_remove_breakpoint): Renamed to ...
1254 (record_full_core_remove_breakpoint): ... this. Updated all users.
1255 (record_core_has_execution): Renamed to ...
1256 (record_full_core_has_execution): ... this. Updated all users.
1257 (init_record_core_ops): Renamed to ...
1258 (init_record_full_core_ops): ... this. Updated all users.
1259 (cmd_record_restore): Renamed to ...
1260 (cmd_record_full_restore): ... this. Updated all users.
1261 (record_save_cleanups): Renamed to ...
1262 (record_full_save_cleanups): ... this. Updated all users.
1263 (cmd_record_start): Renamed to ...
1264 (cmd_record_full_start): ... this. Updated all users.
1265 (set_record_insn_max_num): Renamed to ...
1266 (set_record_full_insn_max_num): ... this. Updated all users.
1267 (set_record_command): Renamed to ...
1268 (set_record_full_command): ... this. Updated all users.
1269 (show_record_command): Renamed to ...
1270 (show_record_full_command): ... this. Updated all users.
1271 (_initialize_record): Renamed to ...
1272 (_initialize_record_full): ... this. Updated all users.
1274 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1276 * record.h: Split into this and ...
1277 * record-full.h: ... this.
1278 * record.c: Split into this and ...
1279 * record-full.c: ... this.
1280 * target.h (target_ops): Add new fields to_info_record,
1281 to_save_record, to_delete_record, to_record_is_replaying,
1282 to_goto_record_begin, to_goto_record_end, to_goto_record.
1283 (target_info_record): New.
1284 (target_save_record): New.
1285 (target_supports_delete_record): New.
1286 (target_delete_record): New.
1287 (target_record_is_replaying): New.
1288 (target_goto_record_begin): New.
1289 (target_goto_record_end): New.
1290 (target_goto_record): New.
1291 * target.c (target_info_record): New.
1292 (target_save_record): New.
1293 (target_supports_delete_record): New.
1294 (target_delete_record): New.
1295 (target_record_is_replaying): New.
1296 (target_goto_record_begin): New.
1297 (target_goto_record_end): New.
1298 (target_goto_record): New.
1299 * record.h: Declare struct cmd_list_element.
1300 (record_cmdlist): New declaration.
1301 (set_record_cmdlist): New declaration.
1302 (show_record_cmdlist): New declaration.
1303 (info_record_cmdlist): New declaration.
1304 (cmd_record_goto): New declaration.
1305 * record.c: Remove unnecessary includes.
1307 (cmd_record_goto): Remove declaration.
1308 (record_cmdlist): Now extern. Initialize.
1309 (set_record_cmdlist): Now extern. Initialize.
1310 (show_record_cmdlist): Now extern. Initialize.
1311 (info_record_cmdlist): Now extern. Initialize.
1312 (find_record_target): New.
1313 (require_record_target): New.
1314 (cmd_record_start): Update.
1315 (cmd_record_delete): Remove target-specific code.
1316 Call target_delete_record.
1317 (cmd_record_stop): Unpush any record target.
1318 (set_record_insn_max_num): Move to record-full.c
1319 (set_record_command): Add comment.
1320 (show_record_command): Add comment.
1321 (info_record_command): Update comment.
1322 Remove target-specific code.
1323 Call the record target's to_info_record.
1324 (cmd_record_start): New.
1325 (cmd_record_goto): Now extern.
1326 Remove target-specific code.
1327 Call target_goto_begin, target_goto_end, or target_goto.
1328 (_initialize_record): Move record target ops initialization to
1330 Change "record" command help text.
1331 Move "record restore", "record set", and "record show" commands to
1333 * Makefile.in (SFILES): Add record-full.c.
1334 (HFILES_NO_SRCDIR): Add record-full.h.
1335 (COMMON_OBS): Add record-full.o.
1336 * amd64-linux-tdep.c: Include record-full.h instead of record.h.
1337 * arm-tdep.c: Include record-full.h.
1338 * i386-linux-tdep.c: Include record-full.h instead of record.h.
1339 * i386-tdep.c: Include record-full.h.
1340 * infrun.c: Include record-full.h.
1341 * linux-record.c: Include record-full.h.
1342 * moxie-tdep.c: Include record-full.h.
1343 * record-full.c: Include record-full.h.
1344 Change module comment.
1345 (set_record_full_cmdlist): New.
1346 (show_record_full_cmdlist): New.
1347 (record_full_cmdlist): New.
1348 (record_goto_insn): New declaration.
1349 (record_save): New declaration.
1350 (record_check_insn_num): Change query string.
1352 (record_delete): New.
1353 (record_is_replaying): New.
1354 (record_goto_entry): New.
1355 (record_goto_begin): New.
1356 (record_goto_end): New.
1358 (init_record_ops): Update.
1359 (init_record_core_ops): Update.
1360 (cmd_record_save): Rename to record_save. Remove target and arg checks.
1361 (cmd_record_start): New.
1362 (set_record_insn_max_num): Moved from record.c
1363 (set_record_full_command): New.
1364 (show_record_full_command): New.
1365 (_initialize_record_full): New.
1367 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1369 * target.h (add_deprecated_target_alias): New.
1370 * target.c (add_deprecated_target_alias): New.
1372 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1374 * common/linux-btrace.c: Include sys/ptrace, sys/types, sys/wait.h,
1376 (linux_supports_btrace): Add kernel and
1378 (kernel_supports_btrace): New function.
1379 (cpu_supports_btrace): New function.
1380 (intel_supports_btrace): New function.
1382 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1384 * target.h (enum target_object): Add TARGET_OBJECT_BTRACE.
1385 * remote.c: Include btrace.h.
1386 (struct btrace_target_info): New struct.
1387 (remote_supports_btrace): New function.
1388 (send_Qbtrace): New function.
1389 (remote_enable_btrace): New function.
1390 (remote_disable_btrace): New function.
1391 (remote_teardown_btrace): New function.
1392 (remote_read_btrace): New function.
1393 (init_remote_ops): Add btrace ops.
1394 (enum <unnamed>): Add btrace packets.
1395 (struct protocol_feature remote_protocol_features[]): Add btrace packets.
1396 (_initialize_remote): Add packet configuration for branch tracing.
1398 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1400 * features/btrace.dtd: New file.
1401 * Makefile.in (XMLFILES): Add btrace.dtd.
1402 * btrace.h (parse_xml_btrace): New declaration.
1403 * btrace.c: Include xml-support.h.
1404 (parse_xml_btrace): New function.
1405 (parse_xml_btrace_block): New function.
1406 (block_attributes): New struct.
1407 (btrace_attributes): New struct.
1408 (btrace_children): New struct.
1409 (btrace_elements): New struct.
1411 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1413 * amd64-linux-nat.c: Include btrace.h and linux-btrace.h.
1414 (amd64_linux_enable_btrace): New.
1415 (amd64_linux_disable_btrace): New.
1416 (amd64_linux_teardown_btrace): New.
1417 (_initialize_amd64_linux_nat): Initialize btrace ops.
1418 * i386-linux.nat.c: Include btrace.h and linux-btrace.h.
1419 (i386_linux_enable_btrace): New.
1420 (i386_linux_disable_btrace): New.
1421 (i386_linux_teardown_btrace): New.
1422 (_initialize_i386_linux_nat): Initialize btrace ops.
1423 * config/i386/linux.mh: Add linux-btrace.o.
1424 * config/i386/linux64.mh: Add linux-btrace.o.
1426 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1428 * common/linux_btrace.h: New file.
1429 * common/linux_btrace.c: New file.
1430 * Makefile.in (SFILES): Add btrace.c.
1431 (HFILES_NO_SRCDIR): Add common/linux-btrace.h.
1432 (COMMON_OBS): Add btrace.o.
1433 (linux-btrace.o): New rule.
1435 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1437 * target.h: Include btrace.h.
1438 (struct target_ops) <to_supports_btrace, to_enable_btrace,
1439 to_disable_btrace, to_teardown_btrace, to_read_btrace>: New.
1440 * target.c (target_supports_btrace): New function.
1441 (target_enable_btrace): New function.
1442 (target_disable_btrace): New function.
1443 (target_teardown_btrace): New function.
1444 (target_read_btrace): New function.
1445 * btrace.h: New file.
1446 * btrace.c: New file.
1447 * Makefile.in: Add btrace.c.
1448 * gdbthread.h: Include btrace.h.
1449 (struct thread_info): Add btrace field.
1450 * thread.c: Include btrace.h.
1451 (clear_thread_inferior_resources): Call target_teardown_btrace.
1452 * common/btrace-common.h: New file.
1454 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1456 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Call also kill
1457 for CHILD, ignore PTRACE_KILL errors, move the inner block variable
1458 kill_status to outer block.
1460 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1462 Fix entry-values if the callee called a noreturn function.
1463 * dwarf2-frame-tailcall.c (dwarf2_tailcall_sniffer_first): Use
1464 get_frame_address_in_block. Add new comment.
1466 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1468 Fix entry-values in C++ across CUs.
1469 * dwarf2loc.c (call_site_to_target_addr) <FIELD_LOC_KIND_PHYSNAME>: Use
1470 lookup_minimal_symbol. Add a comment.
1472 (read_call_site_scope) <is_ref_attr> <die_is_declaration>: Prefer
1475 2013-03-08 Yao Qi <yao@codesourcery.com>
1477 * tracepoint.c (_initialize_tracepoint): Indent the code.
1479 2013-03-08 Pedro Alves <palves@redhat.com>
1481 * findcmd.c (put_bits): Change type of parameter to 'gdb_byte *'.
1482 (parse_find_args, find_command): Change type of pattern buffer
1483 locals to 'gdb_byte *'.
1485 2013-03-08 Stan Shebs <stan@codesourcery.com>
1486 Hafiz Abid Qadeer <abidh@codesourcery.com>
1488 * NEWS: Mention set and show trace-buffer-size commands.
1490 * target.h (struct target_ops): New method
1491 to_set_trace_buffer_size.
1492 (target_set_trace_buffer_size): New macro.
1493 * target.c (update_current_target): Set up new method.
1494 * tracepoint.c (trace_buffer_size): New global.
1495 (start_tracing): Send it to the target.
1496 (set_trace_buffer_size): New function.
1497 (_initialize_tracepoint): Add new setshow for trace-buffer-size.
1498 * remote.c (remote_set_trace_buffer_size): New function.
1499 (_initialize_remote): Use it.
1500 (QTBuffer:size) New remote command.
1501 (PACKET_QTBuffer_size): New enum.
1502 (remote_protocol_features): Add an entry for
1503 PACKET_QTBuffer_size.
1505 2013-03-08 Tom Tromey <tromey@redhat.com>
1507 * remote-m32r-sdi.c (m32r_load): Call skip_spaces on correct
1510 2013-03-07 Pedro Alves <palves@redhat.com>
1512 * target.c (target_read_stralloc, target_fileio_read_alloc):
1513 *Cast pointer to 'gdb_byte *' in target call.
1515 2013-03-07 Pedro Alves <palves@redhat.com>
1517 * corefile.c (read_memory_string): Cast pointer to gdb_byte* in
1520 2013-03-07 Keith Seitz <keiths@redhat.com>
1522 * breakpoint.c (catch_syscall_split_args): Use skip_spaces.
1523 (trace_pass_command): Likewise.
1524 * cli/cli-cmds.c: Include cli/cli-utils.h.
1525 (source_command): Use skip-spaces.
1526 (disassemble_command): Likewise.
1527 * findcmd.c: Include cli/cli-utils.h.
1528 (parse_find_args): Use skip_spaces.
1529 * go32-nat.c: Include cli/cli-utils.h.
1530 (go32_sldt): Use skip_spaces.
1531 (go32_sgdt): Likewise.
1532 (go32_sidt): Likewise.
1533 (go32_pde): Likewise.
1534 (go32_pte): Likewise.
1535 (go32_pte_for_address): Likewise.
1536 * infcmd.c: Include cli/cli-utils.h.
1537 (registers_info): Use skip_spaces.
1538 * linux-tdep.c (read_mapping): Use skip_spaces_const.
1539 (linux_info_proc): Likewise.
1540 * linux-thread-db.c: Include cli/cli-utils.h.
1541 (info_auto_load_libthread_db): Use skip_spaces_const.
1542 * m32r-rom.c: Include cli/cli-utils.h.
1543 (m32r_upload_command): Use skip_spaces.
1544 * maint.c: Include cli/cli-utils.h.
1545 (maintenance_translate_address): Use skip_spaces.
1546 * mi/mi-parse.c: Include cli/cli-utils.h.
1547 (mi_parse_argv): Use skip_spaces.
1548 (mi_parse): Likewise.
1549 * minsyms.c: Include cli/cli-utils.h.
1550 (msymbol_hash_iw): Use skip_spaces_const.
1551 * objc-lang.c: Include cli/cli-utils.h.
1552 (parse_selector): Use skip_spaces.
1553 (parse_method): Likewise.
1554 * python/python.c: Include cli/cli-utils.h.
1555 (python_interactive_command)[HAVE_PYTHON]: Use skip_spaces.
1556 (python_command)[HAVE_PYTHON]: Likewise.
1557 (python_interactive_command)[!HAVE_PYTHON]: Likewise.
1558 * remote-m32r-sdi.c: Include cli/cli-utils.h.
1559 (m32r_load): Use skip_spaces.
1560 * serial.c: Include cli/cli-utils.h.
1561 (serial_open): Use skip_spaces_const.
1562 * stack.c: Include cli/cli-utils.h.
1563 (parse_frame_specification_1): Use skip_spaces_const.
1564 * symfile.c: Include cli/cli-utils.h.
1565 (set_ext_lang_command): Use skip_spaces.
1566 * symtab.c: Include cli/cli-utils.h.
1567 (rbreak_command): Use skip_spaces.
1568 * thread.c (thread_name_command): Use skip_spaces.
1569 * tracepoint.c (validate_actionline): Use skip_spaces.
1570 (encode_actions_1): Likewise.
1571 (trace_find_range_command): Likewise.
1572 (trace_find_outside_command): Likewise.
1573 (trace_dump_actions): Likewise.
1575 2013-03-07 Pedro Alves <palves@redhat.com>
1577 * c-lang.c (parse_one_string): Cast argument to gdb_byte *.
1578 * expprint.c (print_subexp_standard): Likewise.
1579 * utils.c (host_char_to_target): Likewise.
1580 * valprint.c (generic_emit_char, generic_printstr): Likewise.
1581 * varobj.c (value_get_print_value): Change type of local to char*.
1582 Cast it gdb_byte * in call to language printer.
1584 2013-03-07 Pedro Alves <palves@redhat.com>
1586 * charset.c (struct wchar_iterator) <input>: Change type to 'const
1588 (make_wchar_iterator): Remove cast to char*.
1589 (wchar_iterate): Change type of local.
1591 2013-03-07 Pedro Alves <palves@redhat.com>
1593 * regcache.c (regcache_xmalloc_1): Call XCALLOC with signed char
1594 for 'regcache->register_status'.
1596 2013-03-07 Pedro Alves <palves@redhat.com>
1598 * breakpoint.c (breakpoint_xfer_memory): Change type of local to
1601 2013-03-07 Pedro Alves <palves@redhat.com>
1603 * stap-probe.c (handle_stap_probe): Add cast to char*.
1605 2013-03-07 Pedro Alves <palves@redhat.com>
1607 * linux-record.c (record_linux_system_call) <gdb_sys_msgrcv,
1608 RECORD_MSGRCV>: Pass a signed variable to
1609 regcache_raw_read_signed, instead of an unsigned one.
1611 2013-03-07 Pedro Alves <palves@redhat.com>
1613 * remote-notif.c (notif_debug): Change type to int.
1614 * remote-notif.h (notif_debug): Likewise.
1616 2013-03-07 Pedro Alves <palves@redhat.com>
1618 * ser-tcp.c (tcp_retry_limit): Change type to unsigned int.
1620 2013-03-07 Pedro Alves <palves@redhat.com>
1622 * remote.c (hex2bin, bin2hex): Move extern declarations to ...
1623 * remote.h (hex2bin, bin2hex): ... here.
1624 * tracepoint.c (hex2bin, bin2hex): Remove extern declarations.
1626 2013-03-07 Eli Zaretskii <eliz@gnu.org>
1628 * utils.c (initialize_utils): Improve doc strings of "set/show
1629 width", "set/show height", and "set/show pagination".
1631 2013-03-06 Keith Seitz <keiths@redhat.com>
1633 * ax-gdb.c (gen_printf): Make FORMAT const.
1634 * ax-gdb.h (gen_printf): Likewise.
1635 * ax-general.c (ax_string): Make STR const.
1636 * ax.h (ax_string): Likewise.
1638 2013-03-06 Doug Evans <dje@google.com>
1640 * elfread.c (elf_symfile_read): Move debugging printf to more
1643 2013-03-06 Pedro Alves <palves@redhat.com>
1645 * python/py-utils.c (target_string_to_unicode): Delete function.
1646 * python/python-internal.h (target_string_to_unicode): Delete
1649 2013-03-06 Pierre Muller <muller@sourceware.org>
1651 * linespec.c (get_current_search_block): ARI fix, use (void)
1652 for empty parameter list.
1654 2013-03-05 Doug Evans <dje@google.com>
1656 * ada-lang.c (ada_lookup_symbol_list_worker): New function, contents
1657 of old ada_lookup_symbol_list. In !full_search case, don't
1659 (ada_lookup_symbol_list): Delete arg full_search, all callers
1660 updated. Call ada_lookup_symbol_list_worker.
1661 (ada_iterate_over_symbols): Call ada_lookup_symbol_list_worker.
1662 * ada-lang.h (ada_lookup_symbol_list): Update.
1663 * language.h (language_defn): Update comment for
1664 la_iterate_over_symbols.
1665 * linespec.c (iterate_over_file_blocks): New function.
1666 (iterate_over_all_matching_symtabs): Call it.
1667 (lookup_prefix_sym): Ditto.
1668 (get_current_search_block): New function.
1669 (get_search_block): Delete.
1670 (find_label_symbols): Call get_current_search_block.
1671 (add_matching_symbols_to_info): Call iterate_over_file_blocks.
1672 * symtab.c (iterate_over_symbols): Don't search superblocks.
1674 2013-03-05 Yao Qi <yao@codesourcery.com>
1676 * cli/cli-decode.c (add_setshow_zuinteger_unlimited_cmd): Change
1677 parameter VAR's type from "unsigned int" to "int".
1678 * command.h (var_zuinteger_unlimited): Update its comments.
1679 (add_setshow_zuinteger_unlimited_cmd): Update the declaration.
1681 2013-03-05 Corinna Vinschen <vinschen@redhat.de>
1683 * NEWS: Mention new target x86_64-*-cygwin*.
1685 2013-03-05 Corinna Vinschen <vinschen@redhat.de>
1687 * configure.host: Add x86_64-*-cygwin* as host.
1688 * configure.tgt: Add x86_64-*-cygwin* as target.
1689 * config/i386/cygwin64.mh: New file.
1691 2013-03-04 Jan Kratochvil <jan.kratochvil@redhat.com>
1693 * linespec.c (decode_line_2): Fix duplicate request off by two message.
1695 2013-03-04 Jan Kratochvil <jan.kratochvil@redhat.com>
1697 * linespec.c (struct linespec_canonical_name): New.
1698 (struct linespec_state): Change canonical_names type to it.
1699 (add_sal_to_sals): Change variable canonical_name to canonical. Change
1700 xrealloc element size. Initialize the different CANONICAL fields.
1701 (canonical_to_fullform): New.
1702 (filter_results): Use it. Add variables canonical, fullform and
1704 (struct decode_line_2_item, decode_line_2_compare_items): New.
1705 (decode_line_2): Remove variables iter and item_names, add variables
1706 items and items_count. Modify the code for these new variables.
1708 2013-03-04 Corinna Vinschen <vinschen@redhat.com>
1710 * coff-pe-read.c (read_pe_exported_syms): Don't return without
1713 2013-03-04 Luis Machado <lgustavo@codesourcery.com>
1715 * tracepoint.c (build_traceframe_info): Add code for byte order.
1717 2013-03-02 Kevin Buettner <kevinb@redhat.com>
1719 * v850-tdep.c: (v850e2_register_name): Revise system register
1720 names to match current V850E2M architecture specifications.
1721 Update register number enum comments too.
1723 2013-03-01 Jiong Wang <jiwang@tilera.com>
1724 Pedro Alves <palves@redhat.com>
1726 * tilegx-tdep.c (tilegx_analyze_prologue): Limit bundle reading
1728 (tilegx_skip_prologue): Limit prologue analysis to section end.
1730 2013-03-01 Jan Kratochvil <jan.kratochvil@redhat.com>
1732 * dwarf2loc.c (call_site_find_chain_1): New variable save_callee_pc,
1735 2013-03-01 Pedro Alves <palves@redhat.com>
1737 Use gdb_byte for bytes from the program being debugged.
1739 * arm-tdep.c (arm_store_return_value, arm_get_longjmp_target):
1740 Change type of local 'buf' to gdb_byte.
1741 * avr-tdep.c (avr_frame_prev_register, avr_push_dummy_call): Likewise.
1742 * bfin-tdep.c (bfin_push_dummy_call): Likewise.
1743 * cris-tdep.c (cris_sigcontext_addr)
1744 (cris_sigtramp_frame_unwind_cache): Likewise.
1745 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp)
1746 (frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
1748 * frv-tdep.c (frv_pseudo_register_write, frv_analyze_prologue): Likewise.
1749 * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer)
1750 (hppa32_hpux_search_dummy_call_sequence)
1751 (hppa_hpux_supply_save_state): Likewise.
1752 * hppa-linux-tdep.c (insns_match_pattern)
1753 (hppa_linux_find_global_pointer): Likewise.
1754 * hppa-tdep.c (hppa_in_function_epilogue_p)
1755 (skip_prologue_hard_way, hppa_frame_cache): Likewise.
1756 * i386-nto-tdep.c (i386nto_sigcontext_addr): Likewise.
1757 * i386fbsd-tdep.c (i386fbsd_supply_uthread)
1758 (i386fbsd_collect_uthread): Likewise.
1759 * ia64-hpux-tdep.c (ia64_hpux_push_dummy_code): Likewise.
1760 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Likewise.
1761 * ia64-tdep.c (examine_prologue, ia64_frame_cache)
1762 (ia64_frame_prev_register, ia64_sigtramp_frame_cache)
1763 (ia64_sigtramp_frame_prev_register, ia64_access_reg)
1764 (ia64_access_rse_reg, ia64_libunwind_frame_this_id)
1765 (ia64_libunwind_frame_prev_register)
1766 (ia64_libunwind_sigtramp_frame_this_id)
1767 (ia64_find_global_pointer_from_dynamic_section)
1768 (find_extant_func_descr, find_func_descr, ia64_dummy_id)
1769 (ia64_unwind_pc): Likewise.
1770 * iq2000-tdep.c (iq2000_store_return_value): Likewise.
1771 * m68hc11-tdep.c (m68hc11_push_dummy_call)
1772 (m68hc11_extract_return_value): Likewise.
1773 * m68klinux-nat.c (fetch_register, store_register): Likewise.
1774 * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_cr32_write)
1775 (mep_get_insn, mep_push_dummy_call): Likewise.
1776 * mips-linux-tdep.c (mips_linux_get_longjmp_target)
1777 (mips_linux_in_dynsym_stub): Likewise.
1778 * mn10300-tdep.c (mep_pseudo_cr32_write): Likewise.
1779 * ppc-linux-nat.c (fetch_register, store_register): Likewise.
1780 * regcache.c (dump_endian_bytes): Change type of parameter 'buf'
1782 * remote-mips.c (mips_set_register): Likewise.
1783 * remote-sim.c (gdbsim_fetch_register): Likewise.
1784 * score-tdep.c (score7_fetch_inst): Change type of parameter
1785 'memblock' and local 'buf' to gdb_byte.
1786 (score7_malloc_and_get_memblock): Change return type to gdb_byte.
1787 Change type of local 'buf' to gdb_byte. Adjust.
1788 (score7_adjust_memblock_ptr): Change type of parameter 'memblock'
1790 (score7_analyze_prologue): Change type of 'memblock' and
1791 'memblock_ptr' locals to gdb_byte*.
1792 * sh64-tdep.c (sh64_extract_return_value)
1793 (sh64_store_return_value): Change type of local 'buf' to gdb_byte.
1794 * solib-darwin.c (darwin_current_sos, darwin_read_exec_load_addr):
1795 * solib-pa64.c (pa64_solib_create_inferior_hook)
1796 (pa64_open_symbol_file_object): Remove local 'buf'.
1797 * solib-som.c (som_solib_create_inferior_hook, link_map_start)
1798 (som_open_symbol_file_object): Likewise.
1799 * solib-spu.c (spu_current_sos): Likewise.
1800 * spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
1801 * spu-multiarch.c (parse_spufs_run, spu_fetch_registers)
1802 (spu_store_registers): Likewise.
1803 * target.c (debug_print_register): Likewise.
1804 * tic6x-tdep.c (tic6x_get_longjmp_target): Likewise.
1805 * xstormy16-tdep.c (xstormy16_store_return_value)
1806 (xstormy16_push_dummy_call, xstormy16_resolve_jmp_table_entry)
1807 (xstormy16_find_jmp_table_entry): Likewise.
1809 2013-03-01 Jiong Wang <jiwang@tilera.com>
1811 * tilegx-tdep.c (tilegx_get_longjmp_target): New function.
1812 (tilegx_gdbarch_init): Install it.
1814 2013-02-28 Tom Tromey <tromey@redhat.com>
1816 * python/py-arch.c (archpy_disassemble): Use PyInt_Check and
1819 2013-02-28 Doug Evans <dje@google.com>
1821 * python/py-finishbreakpoint.c (bpfinishpy_init): gcc -Wall lint.
1822 * python/python.c (gdbpy_find_pc_line): Ditto.
1824 2013-02-28 Tom Tromey <tromey@redhat.com>
1826 * contrib/excheck.py: New file.
1827 * contrib/exsummary.py: New file.
1828 * contrib/gcc-with-excheck: New file.
1830 2013-02-28 Tom Tromey <tromey@redhat.com>
1832 * python/python.c (gdbpy_print_stack): Call begin_line and
1833 fprintf_filtered inside TRY_CATCH.
1835 2013-02-28 Tom Tromey <tromey@redhat.com>
1837 * python/python.c (gdbpy_find_pc_line): Call find_pc_line
1840 2013-02-28 Tom Tromey <tromey@redhat.com>
1842 * py-finishbreakpoint.c (bpfinishpy_init): Reorganize to call
1843 frame_object_to_frame_info inside TRY_CATCH.
1845 2013-02-28 Tom Tromey <tromey@redhat.com>
1847 * py-block.c (gdbpy_block_for_pc): Call block_for_pc inside
1850 2013-02-28 Tom Tromey <tromey@redhat.com>
1852 * objfiles.h (ALL_PSPACE_OBJFILES): Remove trailing backlash.
1854 2013-02-27 Corinna Vinschen <vinschen@redhat.com>
1856 * windows-nat.c: Throughout, fix format strings and casts of
1857 printf-like functions to avoid type related warnings on all
1859 (handle_output_debug_string): Fetch context information address
1860 from debug string using string_to_core_addr.
1862 2013-02-27 Jiong Wang <jiwang@tilera.com>
1864 * regformats/reg-tilegx.dat (name): Change abi name to "tilegx".
1865 * regformats/reg-tilegx32.dat: New.
1867 2013-02-27 Jiong Wang <jiwang@tilera.com>
1869 * configure.tgt (tilegx-*-linux*): Enable gdbserver.
1871 2013-02-27 Jiong Wang <jiwang@tilera.com>
1873 * configure.tgt (tilegx-*-linux*): Replace whitespace with tab.
1875 2013-02-27 Yao Qi <yao@codesourcery.com>
1876 Pedro Alves <palves@redhat.com>
1878 * tracepoint.c (tfile_trace_find): For tfind
1879 pc/tp/range/outside, look for the next trace frame instead of
1880 always starting from frame 0.
1882 2013-02-26 Anthony Green <green@moxielogic.com>
1884 * configure.tgt: Add support for moxie-*-rtems* target.
1886 2013-02-25 Pedro Alves <palves@redhat.com>
1888 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Change
1891 2013-02-24 Maciej W. Rozycki <macro@codesourcery.com>
1893 * mips-tdep.c (mips32_scan_prologue): Reset frame_offset to zero
1894 if $fp is used as the virtual frame pointer.
1896 2013-02-23 Alan Modra <amodra@gmail.com>
1898 * elfread.c (elf_symtab_read): Do not use udata.p here to find
1900 * ppc64-tdep.c (ppc64_elf_make_msymbol_special): New function.
1901 * ppc64-tdep.h (ppc64_elf_make_msymbol_special): Declare.
1902 * ppc-linux-tdep.c (ppc_linux_init_abi): Set up to use the above.
1903 * ppcfbsd-tdep.c (ppcfbsd_init_abi): Likewise.
1905 2013-02-22 Jan Kratochvil <jan.kratochvil@redhat.com>
1908 * elfread.c (build_id_bfd_get): Make the return type const.
1909 (build_id_verify): Make the check parameter const.
1910 (build_id_to_debug_filename): Make the build_id parameter and variable
1912 (find_separate_debug_file_by_buildid): Make the variable build_id const.
1914 2013-02-21 Alan Modra <amodra@gmail.com>
1916 * elfread.c (build_id_bfd_get): Adjust for elf_tdata changes.
1918 2013-02-20 Siva Chandra Reddy <sivachandra@google.com>
1920 Add a new method 'disassemble' to gdb.Architecture class.
1921 * python/py-arch.c (archpy_disassmble): Implementation of the
1922 new method gdb.Architecture.disassemble.
1923 (arch_object_methods): Add entry for the new method.
1925 2013-02-20 Jiong Wang <jiwang@tilera.com>
1927 * MAINTAINERS (Write After Approval): Add myself to the list.
1929 2013-02-19 Pedro Alves <palves@redhat.com>
1931 Garbage collect 'struct monitor_ops'::load_routine.
1933 * monitor.h (struct monitor_ops) <load_routine>: Remove field.
1934 * monitor.c (monitor_load): No longer call
1935 current_monitor->load_routine.
1936 * dbug-rom.c (init_dbug_cmds): Don't set 'load_routine'.
1937 * m32r-rom.c (init_m32r_cmds): Don't set 'load_routine'.
1938 * ppcbug-rom.c (init_ppc_cmds): Don't set 'load_routine'.
1940 2013-02-19 Pedro Alves <palves@redhat.com>
1944 Harmonize with generic_load.
1946 * monitor.c: Include "readline/readline.h".
1947 (monitor_load): Rename parameter 'file' to 'args'. Use build_argv
1948 instead of sscanf. Use CORE_ADDR/strtoulst instead of unsigned
1949 long/strtol for the 'load_offset' local. Error out if no argument
1950 is given or if too many arguments are given. Tilde expand the
1951 passed in file name.
1953 2013-02-19 Kai Tietz <ktietz@redhat.com>
1956 * symfile.c (load_section_data): Change type of load_offset
1958 (generic_load): User strtoulst instead of strtoul for conversion
1961 2013-02-19 Jiong Wang <jiwang@tilera.com>
1963 * tilegx-tdep.c (tilegx_analyze_prologue): add check for
1964 for return address, "lr" register, saved on stack.
1965 * tilegx-tdep.c (tilegx_frame_cache): update "PC" reg
1966 after we invoke tilegx_analyze_prologue.
1968 2013-02-19 Jiong Wang <jiwang@tilera.com>
1970 * tilegx-tdep.c (itilegx_gdbarch_init): char type should be signed.
1972 2013-02-19 Jiong Wang <jiwang@tilera.com>
1974 * tilegx-tdep.c (tilegx_skip_prologue): Use skip_prologue_using_sal.
1976 2013-02-19 Jiong Wang <jiwang@tilera.com>
1978 * tilegx-tdep.c (INT_SWINT_1_SIGRETURN): New macro.
1979 (tilegx_write_pc): New function.
1980 (tilegx_cannot_reference_register): Return zero if REGNO
1981 is TILEGX_FAULTNUM_REGNUM.
1982 (tilegx_gdbarch_init): Add call to set_gdbarch_write_pc.
1983 (tilegx_register_name): Add handling of "faultnum" register.
1984 * tilegx-tdep.h (enum tilegx_regnum): Add TILEGX_FAULTNUM_REGNUM.
1985 * tilegx-linux-tdep.c (tilegx_linux_supply_regset): Add
1986 handling of TILEGX_FAULTNUM_REGNUM.
1987 * tilegx-linux-nat.c (regmap): Add entry for TILEGX_FAULTNUM_REGNUM.
1989 2013-02-19 Jiong Wang <jiwang@tilera.com>
1991 * tilegx-tdep.c (tilegx_push_dummy_call): args pushed on stack
1992 should be aligned to 64bit.
1994 2013-02-19 Kai Tietz <ktietz@redhat.com>
1996 * windows-nat.c (windows_xfer_memory): Fix debug-output
1999 2013-02-19 Lei Liu <lei.liu2@windriver.com>
2001 * mips-linux-nat.c (mips64_linux_regsets_store_registers):
2002 Don't check DSP register number if HAVE_DSP is not set.
2004 2013-02-19 Alan Modra <amodra@gmail.com>
2006 * elfread.c (struct build_id): Delete. Use struct elf_build_id
2007 throughout file instead.
2008 (build_id_bfd_get): Update to use new elf_tdata build_id field.
2009 Don't xmalloc return value.
2010 (build_id_verify): Similarly. Don't xfree.
2011 (build_id_to_debug_filename): Update.
2012 (find_separate_debug_file_by_buildid): Update, don't xfree.
2014 2013-02-18 Tom Tromey <tromey@redhat.com>
2017 * dwarf2read.c (read_subrange_type): Use result of
2020 2013-02-16 Yuanhui Zhang <asmwarrior@gmail.com>
2022 * frame.c: Remove one extra white space after #include
2025 2013-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
2027 * contrib/cc-with-tweaks.sh: Extend the comment for -p option.
2029 2013-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
2031 * gdb-gdb.gdb.in: Wrap set complaints, b internal_error, b info_command
2032 and dir commands into an if block.
2034 2013-02-15 Sanimir Agovic <sanimir.agovic@intel.com>
2036 * python/py-breakpoint (struct pybp_code): Use int instead of
2039 2013-02-15 Pedro Alves <pedro@codesourcery.com>
2040 Hafiz Abid Qadeer <abidh@codesourcery.com>
2042 * NEWS: Mention new field "trace-file".
2043 * tracepoint.c (trace_status_mi): Output "trace-file" field.
2044 (tfile_open): Record the trace file's filename in the trace
2046 (tfile_files_info): Mention the name of the trace file.
2047 Check the "filename" field explicitely.
2048 (trace_status_command): Explicitely check "filename" field.
2049 (trace_find_command): Ditto.
2050 (trace_find_pc_command): Ditto.
2051 (trace_find_tracepoint_command): Ditto.
2052 (trace_find_line_command): Ditto.
2053 (trace_find_range_command): Ditto.
2054 (trace_find_outside_command): Ditto.
2055 * tracepoint.h (struct trace_status) <from_file>: Rename it
2056 to "filename" and make it hold the trace file's filename
2057 instead of a boolean.
2058 * remote.c (remote_get_trace_status): Initialize "filename"
2059 field with NULL instead of 0.
2061 2013-02-15 Yao Qi <yao@codesourcery.com>
2063 * remote.c: Fix a typo.
2065 2013-02-14 Pierre Muller <muller@sourceware.org>
2067 * contrib/ari/gdb_ari.sh (GNU/Linux rule): Remove.
2069 2013-02-14 Pedro Alves <palves@redhat.com>
2071 * utils.c (savestring): Don't #undef it. Move function to
2072 common/common-utils.c.
2073 * common/common-utils.c: Include gdb_string.h.
2074 (savestring): Move here from utils.c.
2075 * common/common-utils.h (savestring): Declare.
2077 2013-02-14 Pedro Alves <palves@redhat.com>
2079 * utils.c (savestring): Rename parameter 'size' to 'len'.
2081 2013-02-14 Pedro Alves <palves@redhat.com>
2082 Yufeng Zhang <yufeng.zhang@arm.com>
2084 * aarch64-linux-nat.c (aarch64_init_debug_reg_state): Delete.
2085 (aarch64_inferior_data, struct aarch64_inferior_data):
2087 (struct aarch64_process_info): New.
2088 (aarch64_process_list): New global.
2089 (aarch64_find_process_pid, aarch64_add_process)
2090 (aarch64_process_info_get): New functions.
2091 (aarch64_inferior_data_get): Delete.
2092 (aarch64_process_info_get): New function.
2093 (aarch64_forget_process): New function.
2094 (aarch64_get_debug_reg_state): New parameter 'pid'. Reimplement.
2095 (aarch64_linux_prepare_to_resume): Pass the lwp's pid to
2096 aarch64_get_debug_reg_state.
2097 (aarch64_notify_debug_reg_change): Use iterate_over_lwps
2098 instead of linux_nat_iterate_watchpoint_lwps.
2099 (aarch64_linux_new_fork): New function.
2100 (aarch64_linux_child_post_startup_inferior): Use
2101 aarch64_forget_process instead of aarch64_init_debug_reg_state.
2102 (aarch64_handle_breakpoint, aarch64_linux_insert_hw_breakpoint)
2103 (aarch64_linux_remove_hw_breakpoint)
2104 (aarch64_handle_aligned_watchpoint)
2105 (aarch64_handle_unaligned_watchpoint)
2106 (aarch64_linux_insert_watchpoint)
2107 (aarch64_linux_remove_watchpoint)
2108 (aarch64_linux_stopped_data_address): Adjust to pass the current
2109 process id to aarch64_debug_reg_state.
2110 (_initialize_aarch64_linux_nat): Install aarch64_linux_new_fork as
2111 linux_nat_new_fork hook, and aarch64_forget_process as
2112 linux_nat_forget_process hook; remove the call to
2113 register_inferior_data_with_cleanup.
2115 2013-02-14 Pedro Alves <palves@redhat.com>
2117 * eval.c (evaluate_subexp_for_address) <default_case_after_eval,
2118 EVAL_AVOID_SIDE_EFFECTS>: Swap and handle TYPE_CODE_REF before
2121 2013-02-14 Pedro Alves <pedro@codesourcery.com>
2122 Hafiz Abid Qadeer <abidh@codesourcery.com>
2124 * tracepoint.h (validate_trace_state_variable_name): Declare.
2125 * tracepoint.c (validate_trace_state_variable_name): New.
2126 (trace_variable_command): Parse the trace state variable's name
2127 without using parse_expression. Do several validations.
2128 * mi/mi-main.c (mi_cmd_trace_define_variable): Don't parse the
2129 trace state variable's name with parse_expression. Validate it.
2131 2013-02-14 Yao Qi <yao@codesourcery.com>
2133 * infcmd.c (breakpoint_proceeded): Remove it.
2135 2013-02-14 Yao Qi <yao@codesourcery.com>
2137 * tracepoint.c (end_actions_pseudocommand): Make it static.
2138 (while_stepping_pseudocommand): Likewise.
2139 * tracepoint.h (end_actions_pseudocommand): Remove the
2141 (while_stepping_pseudocommand): Likewise.
2143 2013-02-14 Yao Qi <yao@codesourcery.com>
2145 * cli/cli-decode.c (help_cmd): Remove the declaration of
2147 (help_all): Likewise.
2149 2013-02-13 Pedro Alves <palves@redhat.com>
2151 * amd64-linux-nat.c (update_debug_registers_callback):
2153 (amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use
2155 (amd64_linux_prepare_to_resume): Pass the lwp's pid to
2156 i386_debug_reg_state.
2157 (amd64_linux_new_fork): New function.
2158 (_initialize_amd64_linux_nat): Install amd64_linux_new_fork as
2159 linux_nat_new_fork hook, and i386_forget_process as
2160 linux_nat_forget_process hook.
2161 * i386-linux-nat.c (update_debug_registers_callback):
2163 (i386_linux_dr_set_control, i386_linux_dr_set_addr): Use
2165 (i386_linux_prepare_to_resume): Pass the lwp's pid to
2166 i386_debug_reg_state.
2167 (i386_linux_new_fork): New function.
2168 (_initialize_i386_linux_nat): Install i386_linux_new_fork as
2169 linux_nat_new_fork hook, and i386_forget_process as
2170 linux_nat_forget_process hook.
2171 * i386-nat.c (i386_init_dregs): Delete.
2172 (i386_inferior_data, struct i386_inferior_data):
2174 (struct i386_process_info): New.
2175 (i386_process_list): New global.
2176 (i386_find_process_pid, i386_add_process, i386_process_info_get):
2178 (i386_inferior_data_get): Delete.
2179 (i386_process_info_get): New function.
2180 (i386_debug_reg_state): New parameter 'pid'. Reimplement.
2181 (i386_forget_process): New function.
2182 (i386_cleanup_dregs): Rewrite.
2183 (i386_update_inferior_debug_regs, i386_insert_watchpoint)
2184 (i386_remove_watchpoint, i386_region_ok_for_watchpoint)
2185 (i386_stopped_data_address, i386_insert_hw_breakpoint)
2186 (i386_remove_hw_breakpoint): Adjust to pass the current process id
2187 to i386_debug_reg_state.
2188 (i386_use_watchpoints): Don't register inferior data.
2189 * i386-nat.h (i386_debug_reg_state): Add new 'pid' parameter, and
2191 (i386_forget_process): Declare.
2192 * linux-fork.c (delete_fork): Call linux_nat_forget_process.
2193 * linux-nat.c (linux_nat_new_fork, linux_nat_forget_process_hook):
2195 (linux_child_follow_fork): Don't call linux_nat_new_thread here.
2196 (add_initial_lwp): New, factored out from ...
2197 (add_lwp): ... this. Don't check the number of lwps before
2198 calling linux_nat_new_thread.
2199 (linux_nat_iterate_watchpoint_lwps): Delete.
2200 (linux_nat_attach): Use add_initial_lwp instead of add_lwp.
2201 (linux_handle_extended_wait): Call the linux_nat_new_fork hook on
2203 (linux_nat_wait_1): Use add_initial_lwp instead of add_lwp for the
2205 (linux_nat_kill, linux_nat_mourn_inferior): Call
2206 linux_nat_forget_process.
2207 (linux_nat_set_new_fork, linux_nat_set_forget_process)
2208 (linux_nat_forget_process): New functions.
2209 * linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): Delete
2211 (linux_nat_iterate_watchpoint_lwps): Delete declaration.
2212 (linux_nat_new_fork_ftype, linux_nat_forget_process_ftype): New
2214 (linux_nat_set_new_fork, linux_nat_set_forget_process)
2215 (linux_nat_forget_process): New declarations.
2217 * amd64fbsd-nat.c (super_mourn_inferior): New global.
2218 (amd64fbsd_mourn_inferior): New function.
2219 (_initialize_amd64fbsd_nat): Override to_mourn_inferior.
2220 * windows-nat.c (windows_detach): Call i386_cleanup_dregs.
2222 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
2224 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity):
2227 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
2229 * aarch64-linux-nat.c (debug_reg_change_callback)
2230 (aarch64_linux_get_debug_reg_capacity): ARI fix: Replace %llx with
2233 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
2235 * aarch64-linux-nat.c (dr_changed_t): ARI fix: Replace long long
2238 2013-02-13 Pedro Alves <palves@redhat.com>
2239 Hafiz Abid Qadeer <abidh@codesourcery.com>
2241 * c-lang.c (c_op_print_tab): Add entry for UNOP_PLUS.
2243 2013-02-12 Tom Tromey <tromey@redhat.com>
2246 * c-exp.y (lex_one_token): Initialize other fields of yylval on
2248 (classify_inner_name): Remove 'first_name' argument, add
2249 'context'. Remove unused variable.
2250 (yylex): Explicitly maintain the context type. Exit loop earlier
2251 if NAME result is seen.
2253 2013-02-12 Pedro Alves <palves@redhat.com>
2255 * amd64-darwin-tdep.c: Add (C) after Copyright.
2256 * cli/cli-cmds.h: Ditto.
2257 * cli/cli-decode.c: Ditto.
2258 * cli/cli-decode.h: Ditto.
2259 * cli/cli-dump.c: Ditto.
2260 * cli/cli-dump.h: Ditto.
2261 * cli/cli-interp.c: Ditto.
2262 * cli/cli-logging.c: Ditto.
2263 * cli/cli-script.c: Ditto.
2264 * cli/cli-script.h: Ditto.
2265 * cli/cli-setshow.c: Ditto.
2266 * cli/cli-setshow.h: Ditto.
2267 * cli/cli-utils.c: Ditto.
2268 * cli/cli-utils.h: Ditto.
2269 * config/alpha/nm-osf3.h: Ditto.
2270 * config/djgpp/djconfig.sh: Ditto.
2271 * config/i386/nm-fbsd.h: Ditto.
2272 * config/i386/nm-i386gnu.h: Ditto.
2273 * config/nm-linux.h: Ditto.
2274 * config/nm-nto.h: Ditto.
2275 * config/rs6000/nm-rs6000.h: Ditto.
2276 * config/sparc/nm-sol2.h: Ditto.
2277 * darwin-nat-info.c: Ditto.
2280 * gdb-demangle.h: Ditto.
2281 * i386-darwin-nat.c: Ditto.
2282 * i386-darwin-tdep.c: Ditto.
2283 * linux-fork.h: Ditto.
2284 * m32c-tdep.c: Ditto.
2285 * microblaze-linux-tdep.c: Ditto.
2286 * microblaze-rom.c: Ditto.
2287 * microblaze-tdep.c: Ditto.
2288 * microblaze-tdep.h: Ditto.
2289 * mips-linux-tdep.h: Ditto.
2290 * ppc-ravenscar-thread.c: Ditto.
2291 * ppc-ravenscar-thread.h: Ditto.
2292 * prologue-value.c: Ditto.
2293 * prologue-value.h: Ditto.
2294 * ravenscar-thread.c: Ditto.
2295 * ravenscar-thread.h: Ditto.
2296 * sparc-ravenscar-thread.c: Ditto.
2297 * sparc-ravenscar-thread.h: Ditto.
2298 * tilegx-linux-tdep.c: Ditto.
2299 * unwind_stop_reasons.def: Ditto.
2300 * windows-nat.h: Ditto.
2301 * xtensa-linux-tdep.c: Ditto.
2302 * xtensa-xtregs.c: Ditto.
2303 * regformats/regdat.sh: Ditto.
2304 * regformats/regdef.h: Ditto.
2306 2013-02-12 Pedro Alves <palves@redhat.com>
2308 * break-catch-sig.c: Update copyright years.
2310 2013-02-11 Siva Chandra Reddy <sivachandra@google.com>
2312 Add support for a destructor for ui_out data and use it to
2313 provide a ui_out destructor.
2314 * ui-out.h: Declare the new ui_out destructor.
2315 (ui_out_impl): Add a field for data destructor in ui_out_impl.
2316 * ui-out.c (default_data_destroy): Add a default data destructor
2318 (default_ui_out_impl): Set the new data_destroy field to
2319 default_data_destroy
2320 (uo_data_destroy): Local function which invokes the data
2321 destructor if present.
2322 (clear_table): Local function which clears the table data of a
2324 (ui_out_destroy): Public function which frees a ui_out object.
2325 (ui_out_table_end): Use the new clear_table function.
2326 * cli-out.c (cli_ui_out_impl): Set the new data_destroy field to
2328 * mi/mi-out.c (mi_ui_out_impl): Set the new data_destroy field
2331 2013-02-11 Doug Evans <dje@google.com>
2333 * printcmd.c (printf_c_string,printf_wide_c_string): New functions.
2334 (printf_decfloat): New function. Broken out from ui_printf.
2335 Remove unnecessary code to shift the entire format string down.
2336 (printf_pointer): New function.
2337 (ui_printf): Code to print C strings, wide C strings, decfloats,
2338 and pointers moved to separate functions.
2340 2013-02-11 Sergio Durigan Junior <sergiodj@redhat.com>
2342 * valops.c (value_assign): Handling bitfield offset in
2343 `lval_internalvar_component' case.
2345 2013-02-08 Doug Evans <dje@google.com>
2347 * common/format.c (parse_format_string): Fix whitespace.
2349 2013-02-08 Matthew Gretton-Dann <matthew.gretton-dann@linaro.org>
2351 * stack.c (return_command): Work around uninitialized variable
2354 2013-02-08 Yufeng Zhang <yufeng.zhang@arm.com>
2356 * aarch64-linux-tdep.c (AARCH64_LINUX_SIZEOF_GREGSET): Change the
2357 number of the registers from 36 to 34.
2359 2013-02-08 Marcus Shawcroft <marcus.shawcroft@arm.com>
2361 * NEWS: Mention new AArch64 native and target support.
2363 2013-02-08 Marcus Shawcroft <marcus.shawcroft@arm.com>
2365 * MAINTAINERS (Write After Approval): Add myself.
2367 2013-02-08 Jim MacArthur <jim.macarthur@arm.com>
2368 Marcus Shawcroft <marcus.shawcroft@arm.com>
2369 Nigel Stephens <nigel.stephens@arm.com>
2370 Yufeng Zhang <yufeng.zhang@arm.com>
2372 * aarch64-linux-nat.c: New file.
2373 * config/aarch64/linux.mh: New file.
2374 * configure.host: Add AArch64.
2375 * Makefile.in (ALLDEPFILES): Add aarch64-linux-nat.c.
2377 2013-02-07 Doug Evans <dje@google.com>
2379 * cli/cli-cmds.c (_initialize_cli_cmds): Clarify argument to
2380 disassemble command.
2382 2013-02-07 Marcus Shawcroft <marcus.shawcroft@arm.com>
2384 * aarch64-linux-tdep.c (aarch64_linux_init_abi): Call
2385 set_gdbarch_fetch_tls_load_module_address.
2387 2013-02-06 David S. Miller <davem@davemloft.net>
2389 * sparc-tdep.c (sparc32_return_value): Handle writing return value when
2390 using RETURN_VALUE_ABI_PRESERVES_ADDRESS.
2391 * value.c (struct_return_convention): New function.
2392 (using_struct_return): Implement in terms of struct_return_convention.
2393 * value.h (struct_return_convention): Declare.
2394 * stack.c (return_command): Allow successful overriding of the return
2395 value when RETURN_VALUE_ABI_PRESERVES_ADDRESS.
2397 2013-02-06 Tom Tromey <tromey@redhat.com>
2399 * python/py-type.c (typy_strip_typedefs): Don't call check_typedef
2400 outside of TRY_CATCH.
2402 2013-02-06 Yao Qi <yao@codesourcery.com>
2404 * mi/mi-interp.c: Include "tracepoint.h".
2405 (mi_tsv_modified): Declare.
2406 (mi_tsv_created, mi_tsv_deleted): Update declaration.
2407 (mi_interpreter_init): Call observer_attach_tsv_modified.
2408 (mi_tsv_modified): New.
2409 (mi_tsv_created, mi_tsv_deleted): Update.
2410 * tracepoint.c (trace_variable_command): Call
2411 observer_notify_tsv_modified if the initial value of tsv is
2413 (delete_trace_state_variable): Call
2414 observer_notify_tsv_deleted earlier.
2415 (trace_variable_command): Caller update.
2416 (create_tsv_from_upload): Likewise.
2417 * observer.sh: Declare "struct trace_state_variable".
2419 * NEWS: Mention the new MI notification "=tsv-modified".
2421 2013-02-05 Doug Evans <dje@google.com>
2423 * completer.c (location_completer): Fix typo in comment.
2425 2013-02-05 Jan Kratochvil <jan.kratochvil@redhat.com>
2427 * breakpoint.c (add_location_to_breakpoint): Insert the location with
2430 2013-02-05 Marcus Shawcroft <marcus.shawcroft@arm.com>
2432 * aarch64-tdep.c (aarch64_analyze_prologue): ARI fix:
2433 Refactor if statement to avoid trailing || operator.
2435 2013-02-05 Andreas Tobler <andreast@fgznet.ch>
2437 * NEWS: Add PowerPC FreeBSD as a new native configuration.
2439 2013-02-04 Andreas Tobler <andreast@fgznet.ch>
2441 * Makefile.in (ALL_TARGET_OBS): Add powerpc FreeBSD files.
2442 * configure.host: Add powerpc*-*-freebsd* target.
2443 * configure.tgt: Add target info for powerpc*-*-freebsd*.
2444 * ppcfbsd-nat.c, ppcfbsd-tdep.h, ppcfbsd-tdep.c: New files.
2445 * config/powerpc/fbsd.mh: New file.
2447 2013-02-04 Sergio Durigan Junior <sergiodj@redhat.com>
2448 Denys Vlasenko <dvlasenk@redhat.com>
2449 Pedro Alves <palves@redhat.com>
2451 * gdbarch.sh (elfcore_write_linux_prpsinfo): New F hook.
2452 (struct elf_internal_linux_prpsinfo): Forward declare.
2453 * gdbarch.h, gdbarch.c: Regenerate.
2454 * linux-tdep.c: Include `cli/cli-utils.h'.
2455 (linux_fill_prpsinfo): New function.
2456 (linux_make_corefile_notes): Use linux_fill_prpsinfo. If there's
2457 an elfcore_write_linux_prpsinfo hook, use it, otherwise, use
2458 elfcore_write_linux_prpsinfo32 or elfcore_write_linux_prpsinfo64
2459 depending on gdbarch pointer bitness.
2460 * ppc-linux-tdep.c: Include elf-bfd.h.
2461 (ppc_linux_init_abi): Hook in elfcore_write_ppc_linux_prpsinfo32
2464 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2465 Marcus Shawcroft <marcus.shawcroft@arm.com>
2466 Nigel Stephens <nigel.stephens@arm.com>
2467 Yufeng Zhang <yufeng.zhang@arm.com>
2469 * configure.tgt (aarch64*-*-linux*): Set build_gdbserver=yes.
2471 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2472 Marcus Shawcroft <marcus.shawcroft@arm.com>
2473 Nigel Stephens <nigel.stephens@arm.com>
2474 Yufeng Zhang <yufeng.zhang@arm.com>
2476 * aarch64-newlib-tdep.c: New file.
2477 * configure.tgt: Add aarch64-newlib-tdep.o to gdb_target_obs of
2479 * defs.h (enum gdb_osabi): Add GDB_OSABI_NEWLIB.
2480 * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-newlib-tdep.o.
2481 (ALLDEPFILES): Add aarch64-newlib-tdep.c.
2482 * osabi.c (gdb_osabi_names): Add "Newlib".
2484 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2485 Marcus Shawcroft <marcus.shawcroft@arm.com>
2486 Nigel Stephens <nigel.stephens@arm.com>
2487 Yufeng Zhang <yufeng.zhang@arm.com>
2489 * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-linux-tdep.o.
2490 (ALLDEPFILES): Add aarch64-linux-tdep.c.
2491 * aarch64-linux-tdep.c: New file.
2492 * aarch64-linux-tdep.h: New file.
2493 * aarch64-tdep.h (gdbarch_tdep): Define gregset and fpregset.
2494 * configure.tgt: Add aarch64-none-linux-gnu.
2496 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2497 Marcus Shawcroft <marcus.shawcroft@arm.com>
2498 Nigel Stephens <nigel.stephens@arm.com>
2499 Yufeng Zhang <yufeng.zhang@arm.com>
2501 * Makefile.in (ALL_64_TARGET_OBS): Add arch64-tdep.o.
2502 (HFILES_NO_SRCDIR): Add aarch64-tdep.h.
2503 (ALLDEPFILES): Add aarch64-tdep.c.
2504 * aarch64-tdep.c: New file.
2505 * aarch64-tdep.h: New file.
2506 * configure.tgt: Add AArch64.
2507 * features/Makefile (WHICH): Add aarch64 and aarch64-without-fpu.
2508 (aarch64-expedite): New definition.
2509 * features/aarch64-core.xml: New file.
2510 * features/aarch64-fpu.xml: New file.
2511 * features/aarch64-without-fpu.c: New file (generated).
2512 * features/aarch64-without-fpu.xml: New file.
2513 * features/aarch64.c: New file (generated).
2514 * features/aarch64.xml: New file.
2515 * regformats/aarch64-without-fpu.dat: New file (generated).
2516 * regformats/aarch64.dat: New file (generated).
2518 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2520 * contrib/expect-read1.c: New file.
2521 * contrib/expect-read1.sh: New file.
2523 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2525 * dwarf2read.c (file_file_name): New function with code from
2527 (file_full_name): Move most of the code to file_file_name.
2528 (macro_start_file): Rename variable full_name to file_name and use
2529 file_file_name for it. Add comp_dir parameter to new_macro_table.
2530 * macrocmd.c (show_pp_source_pos): New variable fullname. Replace any
2531 macro_source_file->filename access by macro_source_fullname call.
2532 * macroscope.c (_initialize_macroscope): Update the new_macro_table
2534 * macrotab.c (struct macro_table): New field comp_dir.
2535 (macro_include): New variables link_fullname and source_fullname.
2536 Replace any macro_source_file->filename access by macro_source_fullname
2538 (macro_lookup_inclusion): Remove the partial filenames checking code.
2539 (check_for_redefinition): New variables source_fullname and
2540 found_key_fullname. Replace any macro_source_file->filename access by
2541 macro_source_fullname call.
2542 (macro_undef): New variables source_fullname and key_fullname. Replace
2543 any macro_source_file->filename access by macro_source_fullname call.
2544 (macro_lookup_definition): New variables retval and source_fullname.
2545 Replace any macro_source_file->filename access by macro_source_fullname
2547 (foreach_macro): New variable key_fullname. Replace any
2548 macro_source_file->filename access by macro_source_fullname call.
2549 (foreach_macro_in_scope): New variable datum_fullname. Replace any
2550 macro_source_file->filename access by macro_source_fullname call.
2551 (new_macro_table): Add parameter comp_dir. Initialize T with it.
2552 (macro_source_fullname): New function.
2553 * macrotab.h (struct macro_source_file): Extent the filename field
2555 (new_macro_table): New parameter comp_dir, add a comment for it.
2556 (macro_source_fullname): new declaration.
2558 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2560 * dwarf2read.c (dw2_map_symtabs_matching_filename): Move variable
2561 this_real_name to outer block. Use it also for
2562 compare_filenames_for_search.
2563 (dw2_expand_symtabs_matching): New variable this_real_name. Use it
2564 with dw2_get_real_path for file_matcher, considering also
2565 BASENAMES_MAY_DIFFER.
2566 (file_full_name): Prepend COMP_DIR even for relative lh->INCLUDE_DIRS.
2568 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2570 * dwarf2read.c (dw2_expand_symtabs_matching): Add basenames parameter
2571 to the file_matcher parameter. Pass 0 to it.
2572 (dwarf2_create_include_psymtab): Copy also DIRNAME.
2573 * psymtab.c (partial_map_symtabs_matching_filename): Drop handling of
2574 NULL psymtab_to_fullname result.
2575 (psymtab_to_fullname): Remove variable r. Never return NULL, assemble
2576 an expected filename instead.
2577 (expand_symtabs_matching_via_partial): Add basenames parameter to the
2578 file_matcher parameter. Call also psymtab_to_fullname, after newly
2579 considering BASENAMES_MAY_DIFFER.
2580 * source.c (rewrite_source_path): Remove static.
2581 * source.h (rewrite_source_path): New declaration.
2582 * symfile.h (struct quick_symbol_functions): Add basenames parameter to
2583 the expand_symtabs_matching field. Comment it.
2584 * symtab.c (file_matches): New function comment. Add parameter
2585 basenames, implement it.
2586 (search_symbols_file_matches): Add basenames parameter. Update the
2587 file_matches caller.
2588 (search_symbols): Match FILES also against symtab_to_fullname.
2589 Optimize it for BASENAMES_MAY_DIFFER.
2591 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2593 * source.c (print_source_lines_base): Print for TUI also "fullname".
2594 * tui/tui-data.c (init_content_element): Change tui_locator_element
2596 * tui/tui-data.h (struct tui_locator_element): Likewise.
2597 * tui/tui-disasm.c (tui_show_disassem_and_update_source): Rename
2598 tui_update_locator_filename calls to tui_update_locator_fullname.
2599 Replace symtab->filename refererence by symtab_to_fullname call.
2600 * tui/tui-out.c (tui_field_string): Check for "fullname" now.
2601 * tui/tui-source.c (tui_set_source_content): Change tui_locator_element
2602 field to full_name. Replace symtab->filename refererence by
2603 symtab_to_fullname call.
2604 (tui_show_symtab_source): Rename parameter to fullname. Change
2605 tui_locator_element field to full_name.
2606 * tui/tui-stack.c: Include source.h.
2607 (tui_set_locator_filename): Rename the declaration to ...
2608 (tui_set_locator_fullname): ... here. Rename its parameter to
2609 fullname, updates its comment.
2610 (tui_set_locator_info): Rename its parameter to fullname.
2611 (tui_set_locator_filename): Rename the definition to ...
2612 (tui_set_locator_fullname): ... here. Rename its parameter to
2613 fullname, updates its comment. Change tui_locator_element field to
2615 (tui_set_locator_info): Rename its parameter to fullname.
2616 (tui_set_locator_info): Rename callee to tui_set_locator_fullname.
2617 (tui_update_locator_filename): Rename to ...
2618 (tui_update_locator_fullname): ... here. Rename callee to
2619 tui_set_locator_fullname.
2620 (tui_show_frame_info): Replace symtab->filename refererence by
2621 symtab_to_fullname call.
2622 * tui/tui-stack.h (tui_update_locator_filename): Rename to ...
2623 (tui_update_locator_fullname): ... here.
2624 * tui/tui-winsource.c (tui_display_main): Rename the callee to
2625 tui_update_locator_fullname. Replace symtab->filename refererence by
2626 symtab_to_fullname call.
2627 * tui/tui.c (tui_show_source): Rename its parameter to fullname.
2628 Rename the callee to tui_update_locator_fullname.
2629 * tui/tui.h (tui_show_source): Rename its parameter to fullname.
2631 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2633 * ada-lang.c (user_select_syms): Replace symtab->filename refererences
2634 by symtab_to_filename_for_display calls.
2635 * breakpoint.c (print_breakpoint_location, resolve_sal_pc): Likewise.
2636 (clear_command): New variable sal_fullname, initialize it. Replace
2637 compare_filenames_for_search by filename_cmp with sal_fullname.
2638 (say_where, update_static_tracepoint): Replace symtab->filename
2639 refererences by symtab_to_filename_for_display calls.
2640 * cli/cli-cmds.c (edit_command, list_command, ambiguous_line_spec):
2642 * dwarf2read.c: Include source.h.
2643 (fixup_go_packaging): Replace symtab->filename refererences by
2644 symtab_to_filename_for_display calls.
2645 * linespec.c (add_sal_to_sals): Rename variable filename to fullname.
2646 Replace symtab->filename refererences by symtab_to_filename_for_display
2648 (create_sals_line_offset, convert_linespec_to_sals): New variable
2649 fullname, initialize it, replace symtab->filename reference by the
2651 * linux-fork.c: Include source.h.
2652 (info_checkpoints_command): Replace symtab->filename refererences by
2653 symtab_to_filename_for_display calls.
2654 * macroscope.c (sal_macro_scope): Replace symtab->filename refererences
2655 by symtab_to_filename_for_display calls.
2656 * mdebugread.c: Include source.h.
2657 (psymtab_to_symtab_1): Replace symtab->filename refererences by
2658 symtab_to_filename_for_display calls.
2659 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
2660 (mi_cmd_file_list_exec_source_files): Likewise.
2661 * printcmd.c: Include source.h.
2662 (build_address_symbolic): Replace symtab->filename refererences by
2663 symtab_to_filename_for_display calls.
2664 * psymtab.c (partial_map_symtabs_matching_filename)
2665 (read_psymtabs_with_fullname): Call compare_filenames_for_search also
2666 with psymtab_to_fullname.
2667 * python/py-symtab.c (stpy_str): Replace symtab->filename refererences
2668 by symtab_to_filename_for_display calls.
2669 (stpy_get_filename): New variable filename, initialize it, use instead
2670 of symtab->filename refererences.
2671 (salpy_str): Make variable filename const char *. Replace
2672 symtab->filename refererences by symtab_to_filename_for_display calls.
2673 * skip.c: Include source.h and filenames.h.
2674 (skip_file_command): Remove const from the symtab variable. Replace
2675 symtab->filename refererences by symtab_to_fullname call.
2676 (function_name_is_marked_for_skip): New variables searched_for_fullname
2677 and fullname. Use them to search also with symtab's fullname.
2678 * source.c (find_source_lines): Replace symtab->filename refererences
2679 by symtab_to_filename_for_display calls.
2680 (print_source_lines_base): New variable filename, use it instead of
2681 symtab->filename. Replace symtab->filename refererences by
2682 symtab_to_filename_for_display calls.
2683 (line_info, forward_search_command): Replace symtab->filename
2684 refererences by symtab_to_filename_for_display calls.
2685 (reverse_search_command): Replace symtab->filename refererences by
2686 symtab_to_filename_for_display calls. New variable filename for it.
2687 * stack.c (frame_info): Likewise.
2688 * symmisc.c: Include source.h.
2689 (dump_objfile, dump_symtab_1, maintenance_print_symbols)
2690 (maintenance_info_symtabs): Replace symtab->filename refererences by
2691 symtab_to_filename_for_display calls.
2692 * symtab.c (iterate_over_some_symtabs): Call
2693 compare_filenames_for_search also with symtab_to_fullname.
2694 (lookup_symbol_aux_quick, basic_lookup_transparent_type_quick): Replace
2695 symtab->filename refererences by symtab_to_filename_for_display calls.
2696 (find_line_symtab): Replace symtab->filename refererences by
2697 symtab_to_filename_for_display calls.
2698 (file_matches): Replace filename_cmp by compare_filenames_for_search.
2699 (print_symbol_info): Make the last parameter const char *. New
2700 variable s_filename. Use it in the function.
2701 (symtab_symbol_info): Make the last_filename variable const char *.
2702 Replace symtab->filename refererences by symtab_to_filename_for_display
2704 (rbreak_command): New variable fullname. Use it. Replace
2705 symtab->filename refererence by symtab_to_filename_for_display call.
2706 * tracepoint.c (set_traceframe_context, trace_find_line_command)
2707 (print_one_static_tracepoint_marker): Replace symtab->filename
2708 refererences by symtab_to_filename_for_display calls.
2709 * tui/tui-source.c (tui_set_source_content): New variables filename and
2710 s_filename. Replace symtab->filename refererences by this variable.
2711 Replace other symtab->filename refererences by
2712 symtab_to_filename_for_display calls.
2714 2013-02-03 Eldar Gaynetdinov <hal9000ed2k@gmail.com>
2715 Jan Kratochvil <jan.kratochvil@redhat.com>
2717 Add a new variable that controls a way in which filenames are
2719 * NEWS (set filename-display): New entry.
2720 * source.c (filename_display_basename, filename_display_relative)
2721 (filename_display_absolute, filename_display_kind_names)
2722 (filename_display_string, show_filename_display_string)
2723 (symtab_to_filename_for_display): New.
2724 (_initialize_source): Added initialization of 'filename-display'
2726 * source.h (symtab_to_filename_for_display): Added declaration.
2727 * stack.c (print_frame): Added new variable and calling of a new
2728 function and condition with this variable. Changed third argument of
2729 calling of a function.
2731 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2733 * tui/tui-data.c (init_win_info, tui_del_window, tui_free_window):
2734 Rename field reference filename to fullname.
2735 * tui/tui-data.h (struct tui_source_info): Rename field filename to
2736 fullname. New comment for it.
2737 * tui/tui-source.c (tui_set_source_content): Rename field reference
2738 filename to fullname. Initialize field by symtab_to_fullname now.
2739 * tui/tui-winsource.c (tui_update_breakpoint_info): Rename field
2740 reference filename to fullname. Use symtab_to_fullname during
2743 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2746 * dwarf2read.c (dw2_expand_symtabs_with_filename): Rename to ...
2747 (dw2_expand_symtabs_with_fullname): ... here. Rename parameter
2748 filename to fullname. Rename variable this_name to this_fullname.
2749 Lowercase FILENAME_CMP call.
2750 (dw2_find_symbol_file): New comment for the returned string.
2751 (dwarf2_gdb_index_functions): Rename the function to
2752 dw2_expand_symtabs_with_fullname.
2753 * psymtab.c (read_psymtabs_with_filename): Rename to ...
2754 (read_psymtabs_with_fullname): ... here. Rename parameter filename to
2756 (psym_functions): Rename the function to read_psymtabs_with_fullname.
2757 * symfile.h (struct quick_symbol_functions): Rename field
2758 expand_symtabs_with_filename to expand_symtabs_with_fullname and its
2759 parameter filename to fullname. Document returned string meaning for
2761 * symtab.c (find_line_symtab): Rename the called function to
2762 expand_symtabs_with_fullname.
2764 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2767 * breakpoint.c (clear_command): Remove variable is_abs, unify the
2768 call of filename_cmp with compare_filenames_for_search.
2769 * dwarf2read.c (dw2_map_symtabs_matching_filename): Remove variable
2770 is_abs, unify the call of FILENAME_CMP with
2771 compare_filenames_for_search. New gdb_asserts for real_path and name.
2772 Unify the call of compare_filenames_for_search with FILENAME_CMP.
2773 * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
2774 * symfile.h (struct quick_symbol_functions): Extend the comment for
2775 map_symtabs_matching_filename.
2776 * symtab.c (compare_filenames_for_search): Remove the function comment
2777 relative path requirement. Handle absolute filenames, with a comment.
2778 (iterate_over_some_symtabs): Remove variable is_abs, unify the call of
2779 FILENAME_CMP with compare_filenames_for_search. New gdb_asserts for
2780 real_path and name. Unify the call of compare_filenames_for_search
2782 (iterate_over_symtabs): New gdb_assert on REAL_PATH.
2784 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2787 * breakpoint.c (print_breakpoint_location): Replace bp_location field
2788 source_file references by symtab field references. Remove variables
2790 (momentary_breakpoint_from_master, add_location_to_breakpoint):
2791 (clear_command, say_where): Replace bp_location field source_file
2792 references by symtab field references.
2793 (bp_location_dtor): Remove the source_file reference.
2794 (update_static_tracepoint): Replace bp_location field source_file
2795 references by symtab field references.
2796 (breakpoint_free_objfile): New function.
2797 * breakpoint.h (struct bp_location): Extend the comment for line_number.
2798 Replace the field source_file by field symtab, extend its comment.
2799 (breakpoint_free_objfile): New declaration.
2800 * objfiles.c (free_objfile): Call breakpoint_free_objfile.
2801 * tui/tui-winsource.c (tui_update_breakpoint_info): Replace bp_location
2802 field source_file references by symtab field references.
2804 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2806 Replace xfullpath calls by gdb_realpath calls.
2807 * cli/cli-cmds.c (find_and_open_script): Remove xfullpath from the
2809 * dwarf2read.c (dw2_map_expand_apply): Remove parameter full_path.
2810 Remove it from the iterate_over_some_symtabs call.
2811 (dw2_map_symtabs_matching_filename): Remove parameter full_path.
2812 Remove it from the dw2_map_expand_apply calls, remove a block handling
2814 * psymtab.c (partial_map_expand_apply): Remove parameter full_path.
2815 Remove it from the iterate_over_some_symtabs call.
2816 (partial_map_symtabs_matching_filename): Remove parameter full_path.
2817 Remove it from the partial_map_expand_apply calls, remove a block
2818 handling it. Drop gdb_realpath call and cleanups from the real_path
2820 * source.c (openp): Drop the comment part about xfullpath. Replace
2821 xfullpath calls by gdb_realpath calls.
2822 (find_and_open_source): Replace xfullpath call by gdb_realpath call.
2823 * symfile.h (struct quick_symbol_functions): Remove parameter full_path
2824 from method map_symtabs_matching_filename and its comment.
2825 * symmisc.c (maintenance_print_msymbols): Replace xfullpath call by
2827 * symtab.c (iterate_over_some_symtabs): Remove parameter full_path,
2828 remove it also from the function comment, remove a block handling it.
2829 Drop gdb_realpath call and cleanups from the real_path handling.
2830 (iterate_over_symtabs): Drop variable full_path and its use.
2831 * symtab.h (iterate_over_some_symtabs): Remove parameter full_path.
2832 * utils.c (xfullpath): Remove.
2833 * utils.h (xfullpath): Remove.
2835 2013-02-01 Andreas Tobler <andreast@fgznet.ch>
2837 * Makefile.in (ALL_TARGET_OBS): Add ppc64-tdep.o.
2838 (HFILES_NO_SRCDIR): Add ppc64-tdep.h.
2839 (ALLDEPFILES): Add ppc64-tdep.c.
2840 * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
2841 ppc64-tdep.o to gdb_target_obs.
2842 * ppc64-tdep.h: New file.
2843 * ppc64-tdep.c: New file.
2844 (insn_d, insn_ds, insn_xfx, ppc64_desc_entry_point): Move from
2845 ppc-linux-tdep.c to here.
2846 (PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN)
2847 (PPC64_STANDARD_LINKAGE2_LEN): Likewise and use ARRAY_SIZE macro.
2848 (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target)
2849 (ppc64_standard_linkage3_target, ppc64_skip_trampoline_code): Move
2850 from ppc-linux-tdep.c to here.
2851 (ppc64_convert_from_func_ptr_addr): Rename from
2852 ppc64_linux_convert_from_func_ptr_addr to
2853 ppc64_convert_from_func_ptr_addr and move from ppc-linux-tdep.c to
2856 (read_insn): Move from ppc-linux-tdep.c to here.
2857 (insns_match_pattern, insn_d_field, insn_ds_field): Move
2858 from ppc-linux-tdep.c to here and rename them with the ppc_ prefix.
2859 * ppc-linux-tdep.c: Include ppc64-tdep.h.
2860 Removed above functions.
2861 (ppc_linux_init_abi): Adjust.
2863 2013-02-01 Aleksandar Ristovski <aristovski@qnx.com>
2865 * ada-valprint.c (ada_print_floating): Remove unused 'len'.
2867 2013-02-01 Aleksandar Ristovski <aristovski@qnx.com>
2869 * ada-lang.c (assign_aggregate): Remove unused 'is_array_aggregate'.
2871 2013-02-01 Pedro Alves <palves@redhat.com>
2873 * dummy-frame.c (deprecated_pc_in_call_dummy): Delete function.
2874 * frame.h (deprecated_pc_in_call_dummy): Delete declaration.
2876 2013-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
2878 * elfread.c (elf_symfile_read): Limit separate debug info additions to
2879 files with no separate debug info.
2880 * objfiles.c (add_separate_debug_objfile): Add gdb_assert calls.
2881 * symfile.c (read_symbols): Call find_separate_debug_file_in_section
2882 only for files with no separate debug info.
2884 2013-01-31 Tom Tromey <tromey@redhat.com>
2886 * jit.c (jit_program_space_data): Rename from jit_inferior_data;
2888 (struct jit_program_space_data): Rename from jit_inferior_data.
2890 (get_jit_program_space_data): Rename from get_jit_inferior_data.
2891 Change return type. Attach data to program space.
2892 (jit_program_space_data_cleanup): Rename from
2893 jit_inferior_data_cleanup; change argument type.
2894 (jit_read_descriptor): Change 'inf_data' argument to 'ps_data',
2896 (jit_register_code): Update.
2897 (jit_update_inferior_cache): Remove.
2898 (jit_breakpoint_deleted): Get jit data from the location's program
2900 (jit_breakpoint_re_set_internal): Rename 'inf_data' argument to
2901 'ps_data', change type.
2902 (jit_inferior_init, jit_breakpoint_re_set_internal)
2903 (jit_event_handler): Update.
2904 (free_objfile_data): Get data from objfile's program space.
2905 (_initialize_jit): Update.
2907 2013-01-31 Tom Tromey <tromey@redhat.com>
2910 * jit.c (struct jit_inferior_data) <cached_code_address,
2911 jit_breakpoint>: New fields.
2912 (jit_breakpoint_re_set_internal): Fix logging. Only create
2913 breakpoint if cached address has changed.
2914 (jit_update_inferior_cache, jit_breakpoint_deleted): New
2916 (_initialize_jit): Register breakpoint deleted observer.
2918 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2920 * infrun.c (handle_syscall_event): Remove unused gdbarch.
2921 (save_infcall_suspend_state): Ifdef out unused inf.
2922 (restore_infcall_suspend_state): Ifdef out unused inf.
2923 * jit.c (jit_register_code): Remove unused i, b, inf_data.
2924 (jit_frame_sniffer): Remove unused inf_data.
2926 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2928 * c-exp.y (classify_inner_name): Remove unused type.
2929 * c-lang.c (c_printstr): Remove unused byte_order, i, things_printed,
2930 in_quotes, need_comma, wchar_buf, output, cleanup, iter, finished,
2932 (c_get_string): Remove unused kind.
2933 * c-typeprint.c (c_type_print_args): Remove unused i, len, args, table2.
2935 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2937 * charset.c (intermediate_encoding): Remove unused i.
2938 * completer.c (signal_completer): Remove unused i.
2939 * continuations.c (discard_my_continuations_1): Remove unused
2941 * corelow.c (core_close): Remove unuseD name.
2942 (get_core_siginfo): Remove unused pid.
2943 * cp-namespace.c (cp_lookup_symbol_imports_or_template): Remove unused
2945 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Remove unused base_offset.
2946 (loclist_describe_location): Remove unused first.
2947 * event-top.c (command_line_handler): Remove unused got_eof.
2948 * exec.c (exec_close_1): Remove unused need_symtab_cleanup.
2949 (resize_section_table): Remove unused old_value.
2950 * gdb_bfd.c (gdb_bfd_map_section): Remove unused header.
2951 * gnu-v3-abi.c (compute_vtable_size): Remove unused addr.
2952 * i386-tdep.c (i386_process_record): Remove unused rex.
2953 * infcmd.c (get_return_value): Remove unused uiout.
2954 * jv-lang.c (type_from_class): Remove unused is_array.
2955 * jv-valprint.c (java_val_print): Remove unused i.
2956 * linux-nat.c (linux_nat_stop_lwp): Remove unused ptid.
2957 * linux-thread-db.c (thread_db_find_new_threads_2): Remove unuseD pid.
2958 * m2-typeprint.c (m2_print_type): Remove unused code.
2959 * macroexp.c (get_character_constant): Remove unused body_start.
2960 (macro_stringify): Remove unused result.
2961 * objc-lang.c (find_methods): Remove unused gdbarch.
2962 * objfiles.c (filter_overlapping_sections): Remove unused abfd1, abfd2.
2963 * regcache.c (regcache_cooked_read): Remove unused gdbarch.
2964 * stack.c (print_frame_args): Remove unused summary.
2965 * thread.c (thread_apply_command): Remove unused p.
2966 * valarith.c (value_x_unop): Remove unused mangle_ptr.
2967 * valops.c (search_struct_method): Remove unused skip.
2968 * valprint.c (generic_val_print): Remove unused byte_order.
2969 * varobj.c (varobj_update): Remove unused changed.
2970 * cli/cli-cmds.c (complete_command): Remove unused next_item.
2971 (alias_command): Remove unused c.
2972 * mi/mi-cmd-catch.c (mi_catch_load_unload): Remove unused c.
2973 * mi/mi-main.c (mi_cmd_data_write_register_values): Remove unused
2975 (mi_cmd_data_write_memory): Remove unused word_format.
2976 (mi_cmd_data_write_memory_bytes): Remove unused r.
2977 * python/py-gdb-readline.c (gdbpy_readline_wrapper): Remove unused
2979 * python/python.c (_initialize_python): Remove unused cmd_name, cmd.
2980 * tui/tui-disasm.c (tui_set_disassem_content): Remove unused
2983 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2985 * dwarf2-frame.c (dwarf2_compile_cfa_to_ax): Remove unused num_regs.
2986 * symtab.c (iterate_over_symtabs): Remove unused s.
2987 (find_pc_sect_symtab): Remove unused pspAce.
2988 (find_pc_sect_line): Remove unused alt_symtab.
2989 (find_pcs_for_symtab_line): Remove unused ix, previous_function.
2990 (completion_list_add_name): Remove unused newsize.
2992 2013-01-31 Tom Tromey <tromey@redhat.com>
2995 * dwarf2read.c (read_tag_ptr_to_member_type): Handle
2998 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
3000 * target.c (target_read_string): Remove unused origlen.
3002 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
3004 * auto-load.c (auto_load_expand_dir_vars): Remove unused dir_vec.
3005 * ax-gdb.c (gen_printf): Remove unused expr, i, bot, fr, flen, fmt.
3006 * ax-general.c (ax_print): Remove unused is_float.
3007 * blockframe.c (block_innermost_frame): Remove unused start, end.
3008 * break-catch-sig.c (catch_signal_command): Remove unused gdbarch.
3010 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
3012 * solib-svr4.c (svr4_keep_data_in_core): Remove unused lmo.
3013 (svr4_read_so_list): Remove unused lmo.
3014 * solib-target.c (solib_target_relocate_section_addresses): Remove
3017 2013-01-30 Tom Tromey <tromey@redhat.com>
3019 * hppa-tdep.c (read_unwind_info): Use SECT_OFF_TEXT, not "0".
3021 2013-01-30 Tom Tromey <tromey@redhat.com>
3023 * symfile.c (get_file_crc): Use bfd_calc_gnu_debuglink_crc32.
3024 * utils.c (gnu_debuglink_crc32): Remove.
3025 * utils.h (gnu_debuglink_crc32): Don't declare.
3027 2013-01-30 Tom Tromey <tromey@redhat.com>
3029 * dwarf2read.c (compute_delayed_physnames, read_call_site_scope)
3030 (read_structure_type, read_enumeration_type): Remove cast.
3032 2013-01-30 Tom Tromey <tromey@redhat.com>
3034 * dwarf2read.c (read_namespace_type): Remove cast.
3035 (read_typedef): Likewise.
3037 2013-01-29 Tom Tromey <tromey@redhat.com>
3039 * dwarf2read.c (free_dwo_file): Remove assert.
3041 2013-01-29 Tom Tromey <tromey@redhat.com>
3043 * value.c (deprecated_set_value_modifiable): Remove.
3044 * value.h (deprecated_set_value_modifiable): Remove.
3046 2013-01-28 Doug Evans <dje@google.com>
3048 * dwarf2loc.c (dwarf2_find_location_expression): Don't add base address
3049 to addresses from dwo files.
3051 2013-01-25 Siva Chandra Reddy <sivachandra@google.com>
3053 * valops.c (find_overload_match): Remove unused argument 'lax'.
3054 * value.h: Remove unused argument 'lax' from the declaration of
3055 find_overload_match.
3056 * eval.c (value_subexp_standard): Do not pass a 'lax' argument
3057 to find_overload_match.
3058 * valarith.c (value_user_defined_cpp_op): Do not pass a 'lax'
3059 argument to find_overload_match.
3061 2013-01-25 Tom Tromey <tromey@redhat.com>
3063 * dwarf2read.c (processing_has_namespace_info): Remove.
3064 (struct dwarf2_cu) <processing_has_namespace_info>: New field.
3065 (process_die, read_func_scope, dwarf2_start_symtab)
3066 (new_symbol_full): Update.
3068 2013-01-25 Tom Tromey <tromey@redhat.com>
3070 * cp-namespace.c (cp_set_block_scope): Remove.
3071 * cp-support.h (cp_set_block_scope): Remove.
3072 * dbxread.c: Include block.h.
3073 (cp_set_block_scope): New function.
3074 (process_one_symbol): Update.
3075 * dwarf2read.c (read_func_scope): Use block_set_scope.
3077 2013-01-25 Pedro Alves <palves@redhat.com>
3079 * remote.c (add_current_inferior_and_thread): Tweak comment.
3081 2013-01-25 Tom Tromey <tromey@redhat.com>
3083 * cp-namespace.c (cp_scan_for_anonymous_namespaces): Update.
3084 (cp_add_using_directive): Add 'copy_names' argument.
3085 * cp-support.h (cp_add_using_directive): Update.
3086 (struct using_direct) <import_src, import_dest, alias,
3087 declaration>: Now const.
3088 * dwarf2read.c (read_import_statement): Use obconcat.
3089 Don't copy names passed to cp_add_using_directive.
3091 2013-01-25 Tom Tromey <tromey@redhat.com>
3093 * c-exp.y (qualified_name): Use TYPE_SAFE_NAME.
3095 2013-01-25 Pedro Alves <palves@redhat.com>
3097 * remote.c (stop_reply_extract_thread): New.
3098 (add_current_inferior_and_thread): New parameter 'wait_status'.
3100 (remote_start_remote): Pass wait status to
3101 add_current_inferior_and_thread.
3102 (extended_remote_run): Update comment.
3103 (extended_remote_create_inferior_1): Pass wait status to
3104 add_current_inferior_and_thread.
3106 2013-01-25 Andrew Burgess <aburgess@broadcom.com>
3107 Ulrich Weigand <uweigand@de.ibm.com>
3109 * valarith.c (value_vector_widen): New function for replicating a
3110 scalar into a vector.
3111 (value_binop): Use value_vector_widen to widen scalar to vector
3112 rather than casting, this better matches gcc C behaviour.
3113 * valops.c (value_casst): Update logic for casting between vector
3114 types, and for casting from scalar to vector, try to match gcc C
3116 * value.h (value_vector_widen): Declare.
3117 * opencl-lang.c (opencl_value_cast): New opencl specific casting
3118 function, handle special case for casting scalar to vector.
3119 (opencl_relop): Use opencl_value_cast.
3120 (evaluate_subexp_opencl): Use opencl_value_cast instead of
3121 value_cast, and handle BINOP_ASSIGN, UNOP_CAST, and UNOP_CAST_TYPE
3122 in order to use opencl_value_cast.
3124 2013-01-25 Yao Qi <yao@codesourcery.com>
3126 * event-loop.c: Include "queue.h".
3127 (gdb_event_p): New typedef.
3128 (DECLARE_QUEUE_P): Use.
3129 (DEFINE_QUEUE_P): Use.
3130 (async_queue_event): Remove.
3131 (gdb_event_xfree): New.
3132 (initialize_event_loop): New.
3133 (process_event): Use QUEUE macros.
3134 (event_queue): Remove.
3135 (gdb_wait_for_event): Caller update.
3136 (check_async_event_handlers): Likewise.
3137 (poll_timers): Likewise.
3138 * event-loop.h (initialize_event_loop): Declare.
3139 * event-loop.c (gdb_event_xfree): New.
3140 * top.c (gdb_init): Call initialize_event_loop.
3142 2013-01-25 Yao Qi <yao@codesourcery.com>
3144 * event-loop.c (async_queue_event): Remove one parameter
3145 'position'. Remove code handling 'position' == TAIL.
3146 (gdb_wait_for_event): Caller update.
3147 (check_async_event_handlers): Caller update.
3148 (poll_timers): Caller update.
3149 * event-loop.h (enum queue_position): Remove.
3151 2013-01-25 Maxim Kuvyrkov <maxim@kugelworks.com>
3153 * MAINTAINERS: Update my email.
3155 2013-01-25 Yao Qi <yao@codesourcery.com>
3157 * main.c (print_gdb_help): Remove "--epoch" from the help
3160 2013-01-24 Ulrich Weigand <uweigand@de.ibm.com>
3162 * symtab.c (skip_prologue_using_sal): Consider a file
3163 change the same as an increased line number
3165 2013-01-24 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
3167 * MAINTAINERS (Write After Approval): Add myself to the list.
3169 2013-01-24 Tom Tromey <tromey@redhat.com>
3171 * ada-lang.h (ada_decode_symbol): Make return type const.
3172 * ada-lang.c (ada_decode_symbol): Likewise.
3174 2013-01-23 Doug Evans <dje@google.com>
3176 * linespec.c (find_linespec_symbols): Make static.
3178 2013-01-23 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
3180 * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value): Set correct
3181 type on float conversion for complex type.
3183 2013-01-23 Siva Chandra Reddy <sivachandra@google.com>
3185 Add a new class gdb.Architecture which exposes GDB's
3186 internal representation of architecture via GDB Python API.
3187 * Makefile.in: Add entries corresponding to the new file
3189 * NEWS (Python Scripting): Add entries for the new class
3190 gdb.Architecture and the new method gdb.Frame.architecture.
3191 * python/py-arch.c: Implement gdb.Architecture class.
3192 * python/py-frame.c (frapy_arch): Implement the method
3193 gdb.Frame.architecture().
3194 (frame_object_methods): Add 'architecture' to the method table.
3195 * python/python-internal.h: Add declarations of new utility
3197 * python/python.c (_initialize_python): Initialize
3198 gdb.Architecture class.
3200 2013-01-23 Doug Evans <dje@google.com>
3202 Work around binutils/15021.
3203 * dwarf2read.c (dwarf2_per_cu_data): Split imported_symtabs and
3204 type_unit_group out of union s. All uses updated.
3205 (read_index_from_section): Watch for index version 8.
3206 (follow_die_sig): If using .gdb_index version <= 7, record the TU as
3208 (write_psymtabs_to_index): Increment version number to 8.
3210 2013-01-22 Pedro Alves <palves@redhat.com>
3212 * annotate.c (breakpoint_changed): Skip if breakpoint is not
3215 2013-01-22 Pedro Alves <palves@redhat.com>
3217 * annotate.c (annotate_breakpoints_changed): Rename to ...
3218 (annotate_breakpoints_invalid): ... this. Make static.
3219 (breakpoint_changed): Adjust.
3220 (_initialize_annotate): Always install the observers. Install a
3221 "breakpoint_created" observer.
3222 * annotate.h (annotate_breakpoints_changed): Delete declaration.
3223 * breakpoint.c (set_breakpoint_condition)
3224 (breakpoint_set_commands, do_map_commands_command)
3225 (init_raw_breakpoint, clear_command, set_ignore_count)
3226 (enable_breakpoint_disp): No longer call
3227 annotate_breakpoints_changed.
3229 2013-01-22 Pedro Alves <palves@redhat.com>
3231 * annotate.c: Include "inferior.h".
3232 (frames_invalid_emitted)
3233 (breakpoints_invalid_emitted): New globals.
3234 (async_background_execution_p): New function.
3235 (annotate_breakpoints_changed, annotate_frames_invalid): Skip
3236 emitting the annotation if it has already been emitted.
3237 (annotate_display_prompt): New function.
3238 * annotate.h (annotate_display_prompt): New declaration.
3239 * event-top.c: Include annotate.h.
3240 (display_gdb_prompt): Call annotate_display_prompt.
3242 2013-01-22 Pedro Alves <palves@redhat.com>
3244 * annotate.c (ignore_count_changed): Delete.
3245 (annotate_breakpoints_changed): Don't clear ignore_count_changed.
3246 (annotate_ignore_count_change): Delete.
3247 (annotate_stopped): Don't emit a delayed breakpoints-changed
3249 * annotate.h (annotate_ignore_count_change): Delete.
3250 * breakpoint.c (bpstat_check_breakpoint_conditions): Don't call
3251 annotate_ignore_count_change.
3253 2013-01-22 Tom Tromey <tromey@redhat.com>
3255 * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>: Only
3256 require_rvalue for a register location.
3258 2013-01-21 Marc Khouzam <marc.khouzam@ericsson.com>
3260 * breakpoint.c (print_one_breakpoint_location): Add MI
3261 field 'thread-groups' when printing a breakpoint.
3262 (output_thread_groups): New function.
3264 2013-01-21 Siva Chandra Reddy <sivachandra@google.com>
3266 * python/lib/gdb/commands/explore.py
3267 (CompoundExplorer.explore_expr): Correct the name of a method
3269 (ExploreTypeCommand.invoke): Add a missing 'return'.
3271 2013-01-21 Tom Tromey <tromey@redhat.com>
3273 * gdb_obstack.h (obconcat): Move declaration here, from...
3274 * symfile.h (obconcat): ... here.
3275 * gdb_obstack.c: New file.
3276 (obconcat): Move from...
3277 * symfile.c (obconcat): ... here.
3278 * Makefile.in (SFILES): Add gdb_obstack.c.
3279 (COMMON_OBS): Add gdb_obstack.o.
3281 2013-01-21 Tom Tromey <tromey@redhat.com>
3283 * symfile.h (obsavestring): Don't declare.
3284 * symfile.c (obsavestring): Remove.
3285 * ada-exp.y: Use obstack_copy0, not obsavestring.
3286 * ada-lang.c: Use obstack_copy0, not obsavestring.
3287 * coffread.c: Use obstack_copy0, not obsavestring.
3288 * cp-namespace.c: Use obstack_copy0, not obsavestring.
3289 * dbxread.c: Use obstack_copy0, not obsavestring.
3290 * dwarf2read.c: Use obstack_copy0, not obsavestring.
3291 * jit.c: Use obstack_copy0, not obsavestring.
3292 * mdebugread.c: Use obstack_copy0, not obsavestring.
3293 * psymtab.c: Use obstack_copy0, not obsavestring.
3294 * stabsread.c: Use obstack_copy0, not obsavestring.
3295 * xcoffread.c: Use obstack_copy0, not obsavestring.
3297 2013-01-21 Tom Tromey <tromey@redhat.com>
3299 * dwarf2read.c (fixup_go_packaging): Save package name
3301 * gdbtypes.c (init_type): Don't copy name.
3303 2013-01-21 Tom Tromey <tromey@redhat.com>
3305 * dwarf2read.c (struct partial_die_info) <name, scope>: Now
3307 (struct attribute) <u.str>: Now const.
3308 (struct fnfieldlist) <name>: Now const.
3309 (dw2_get_file_names_reader, init_cutu_and_read_dies): Update.
3310 (partial_die_parent_scope): Make return type const.
3311 (partial_die_full_name, add_partial_symbol): Update.
3312 (dwarf2_compute_name, dwarf2_full_name, dwarf2_physname): Make
3314 (find_file_and_directory): Make 'name' and 'comp_dir' const.
3315 (read_file_scope, read_func_scope, dwarf2_add_field)
3316 (dwarf2_add_member_fn, read_structure_type)
3317 (process_enumeration_scope, read_array_type, read_module_type)
3318 (read_base_type, read_subrange_type): Update.
3319 (dwarf2_start_symtab): Make 'name' and 'comp_dir' const.
3320 (new_symbol_full, guess_full_die_structure_name): Update.
3321 (dwarf2_canonicalize_name): Return const type. Make 'name' const.
3322 (dwarf2_name): Return const type.
3323 (dwarf_decode_macro_bytes, dwarf_decode_macros): Make 'comp_dir'
3326 2013-01-21 Tom Tromey <tromey@redhat.com>
3328 * gdbtypes.c (init_type): Make 'name' const.
3329 * gdbtypes.h (init_type): Update.
3331 2013-01-21 Tom Tromey <tromey@redhat.com>
3333 * buildsym.c (patch_subfile_names): Use set_last_source_file.
3334 (start_symtab): Make 'name' and 'dirname' const. Use
3335 set_last_source_file.
3336 (restart_symtab, reset_symtab_globals): Use set_last_source_file.
3337 (last_source_file): Define. Now static.
3338 (set_last_source_file, get_last_source_file): New functions.
3339 * buildsym.h (last_source_file): Don't declare.
3340 (start_symtab): Update.
3341 (set_last_source_file, get_last_source_file): Declare.
3342 * coffread.c (complete_symtab): Use set_last_source_file.
3343 (coff_end_symtab): Likewise.
3344 (coff_symtab_read): Use set_last_source_file, get_last_source_file.
3345 * dbxread.c (read_dbx_symtab, read_ofile_symtab): Use
3346 set_last_source_file.
3347 (process_one_symbol): Use get_last_source_file.
3348 * mdebugread.c (parse_partial_symbols): Use set_last_source_file.
3349 (psymtab_to_symtab_1): Use get_last_source_file.
3350 * xcoffread.c (process_linenos): Use get_last_source_file.
3351 (complete_symtab): Use set_last_source_file.
3352 (read_xcoff_symtab): Use set_last_source_file, get_last_source_file.
3353 (scan_xcoff_symtab): Use set_last_source_file.
3355 2013-01-21 Tom Tromey <tromey@redhat.com>
3357 * symtab.c (struct demangled_name_entry) <mangled>: Now const.
3358 (symbol_set_names): Remove casts. Handle field const-ness.
3360 2013-01-21 Tom Tromey <tromey@redhat.com>
3362 * dwarf2read.c (new_symbol_full): Remove cast.
3363 * symtab.c (symbol_set_demangled_name): Make 'name' const.
3364 * symtab.h (symbol_set_demangled_name): Update.
3366 2013-01-21 Tom Tromey <tromey@redhat.com>
3368 * main.c (captured_main): Call bfd_init.
3370 2013-01-21 Tom Tromey <tromey@redhat.com>
3372 * gnu-v2-abi.c (_initialize_gnu_v2_abi): Don't set default ABI.
3373 * gnu-v3-abi.c (_initialize_gnu_v3_abi): Set default ABI.
3374 * minsyms.c (install_minimal_symbols): Don't check for _Z symbols.
3377 2013-01-21 Jan Kratochvil <jan.kratochvil@redhat.com>
3379 * symmisc.c (maintenance_print_msymbols): Check also ST_DEV.
3381 2013-01-21 Jan Kratochvil <jan.kratochvil@redhat.com>
3383 Fix gdb.fortran/common-block.exp crash in PIE mode.
3384 * dwarf2read.c (new_symbol_full) <DW_TAG_common_block>: Use
3386 * f-valprint.c (info_common_command_for_block): Expect
3387 LOC_COMMON_BLOCK in gdb_assert.
3388 * symtab.h (struct general_symbol_info): Update comment for the
3389 common_block member.
3390 (domain_enum): Extend comment for the COMMON_BLOCK_DOMAIN member.
3391 (enum address_class): New member LOC_COMMON_BLOCK.
3393 2013-01-18 David Blaikie <dblaikie@gmail.com>
3395 * MAINTAINERS (Write After Approval): Add "David Blaikie".
3397 2013-01-18 Tom Tromey <tromey@redhat.com>
3400 * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>:
3401 Call require_rvalue.
3403 2013-01-18 Yao Qi <yao@codesourcery.com>
3405 * dbxread.c (dbx_psymtab_to_symtab): Delete the declaration.
3406 (dbx_read_symtab): New declaration.
3407 (dbx_psymtab_to_symtab): Delete.
3408 (dbx_read_symtab): Rename from dbx_psymtab_to_symtab.
3409 Rename parameter PST to SELF. Exchanged two parameters.
3410 (start_psymtab): Caller update.
3411 * dwarf2read.c (dwarf2_psymtab_to_symtab): Delete the declaration.
3412 (dwarf2_read_symtab): New declaration.
3413 (dwarf2_psymtab_to_symtab): Delete.
3414 (dwarf2_read_symtab): Rename from dwarf2_psymtab_to_symtab.
3415 Rename parameter PST to SELF. Exchanged two parameters.
3416 (create_partial_symtab): Caller update.
3417 * mdebugread.c (mdebug_psymtab_to_symtab): Delete.
3418 (mdebug_read_symtab): Rename from mdebug_psymtab_to_symtab.
3419 Rename parameter PST to SELF. Exchanged two parameters.
3420 (parse_partial_symbols, new_psymtab): Caller update.
3421 * psympriv.h (struct partial_symtab) <read_symtab>: Exchange
3423 * psymtab.c (psymtab_to_symtab): Caller update.
3424 * xcoffread.c (xcoff_psymtab_to_symtab): Delete.
3425 (xcoff_read_symtab): Rename from xcoff_psymtab_to_symtab.
3426 Rename parameter PST to SELF. Exchanged two parameters.
3427 (xcoff_start_psymtab): Caller update.
3429 2013-01-18 Yao Qi <yao@codesourcery.com>
3431 * infrun.c (proceed): Rename local variable 'oneproc' to
3434 2013-01-17 Doug Evans <dje@google.com>
3436 * dwarf2read.c (dw2_build_type_unit_groups_reader): Delete.
3437 (dw2_build_type_unit_groups): Delete. All uses updated.
3439 * symtab.h (struct symbol_search): Add comment.
3441 2013-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
3443 * symtab.c (compare_filenames_for_search): New comment for
3446 2013-01-17 Tom Tromey <tromey@redhat.com>
3448 * cp-abi.c (cp_abi_completer): Fix typo in assignment.
3450 2013-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
3452 * symtab.c (iterate_over_some_symtabs): New variable cleanups,
3453 initialize it by existing make_cleanup. Call new do_cleanups.
3455 2013-01-17 Tom Tromey <tromey@redhat.com>
3457 * cp-abi.c (cp_abi_completer): New function.
3458 (_initialize_cp_abi): Set completer for "set cp-abi".
3460 2013-01-17 Tom Tromey <tromey@redhat.com>
3462 * mem-break.c: Remove obsolete comment.
3463 * bfin-tdep.c (bfin_breakpoint_from_pc): Fix comment.
3465 2012-01-17 Sanjoy Das <sanjoy@playingwithpointers.com>
3467 * jit.c (jit_reader_load_command): Interpret the jit reader name
3468 as an absolute path if it begins with a forward slash.
3470 2012-01-17 Sanjoy Das <sanjoy@playingwithpointers.com>
3474 * jit.c (finalize_symtab): Ensure that only the global block has a
3477 2013-01-17 Pedro Alves <palves@redhat.com>
3479 * acinclude.m4: Include ../config/plugins.m4,
3480 ../config/largefile.m4 and ../config/lead-dot.m4. Add comments.
3481 * Makefile.in (aclocal_m4_deps): Update.
3482 * aclocal.m4: Renegerate.
3484 2013-01-16 Doug Evans <dje@google.com>
3486 * contrib/cc-with-tweaks.sh: Add references to Fission docs.
3488 2013-01-16 Pedro Alves <palves@redhat.com>
3489 Tom Tromey <tromey@redhat.com>
3492 * NEWS: Add "catch signal".
3493 * breakpoint.c (base_breakpoint_ops): No longer static.
3494 (bpstat_explains_signal): New function.
3495 (init_catchpoint): No longer static.
3496 (base_breakpoint_explains_signal): New function.
3497 (base_breakpoint_ops): Initialize new field.
3498 * breakpoint.h (enum bpstat_signal_value): New.
3499 (struct breakpoint_ops) <explains_signal>: New field.
3500 (bpstat_explains_signal): Remove macro, declare as function.
3501 (base_breakpoint_ops, init_catchpoint): Declare.
3502 * break-catch-sig.c: New file.
3503 * inferior.h (signal_catch_update): Declare.
3504 * infrun.c (signal_catch): New global.
3505 (handle_syscall_event): Update for change to
3506 bpstat_explains_signal.
3507 (handle_inferior_event): Likewise. Always handle random signals
3509 (signal_cache_update): Check signal_catch.
3510 (signal_catch_update): New function.
3511 (_initialize_infrun): Initialize signal_catch.
3512 * Makefile.in (SFILES): Add break-catch-sig.c.
3513 (COMMON_OBS): Add break-catch-sig.o.
3515 2013-01-16 Tom Tromey <tromey@redhat.com>
3517 * breakpoint.c (print_one_catch_fork, print_one_catch_vfork)
3518 (print_one_catch_solib, print_one_catch_syscall)
3519 (print_one_catch_exec, print_one_exception_catchpoint): Emit
3522 2013-01-16 Yao Qi <yao@codesourcery.com>
3524 * printcmd.c (current_display_number): Make it static.
3526 2013-01-16 Yao Qi <yao@codesourcery.com>
3528 * infcmd.c (step_once): Don't check '!single_inst' as it was
3531 2013-01-15 Jan Kratochvil <jan.kratochvil@redhat.com>
3533 * dwarf2read.c (psymtab_include_file_name): Extend the function comment.
3535 2013-01-14 Tom Tromey <tromey@redhat.com>
3537 * cli/cli-decode.c (add_setshow_string_noescape_cmd): Return the
3539 * command.h (add_setshow_string_noescape_cmd): Update.
3540 * corefile.c (set_gnutarget_command): Remove trailing whitespace.
3541 (complete_set_gnutarget): New function.
3542 (_initialize_core): Set the "set gnutarget" completer.
3544 2013-01-14 Tom Tromey <tromey@redhat.com>
3547 * c-typeprint.c (cp_type_print_method_args): Handle 'restrict'.
3548 (c_type_print_modifier): Likewise.
3549 * dwarf2read.c (read_tag_restrict_type): New function.
3550 (read_type_die_1): Handle DW_TAG_restrict_type.
3551 * gdbtypes.c (make_restrict_type): New function.
3552 (recursive_dump_type): Handle TYPE_RESTRICT.
3553 * gdbtypes.h (enum type_flag_values): Renumber.
3554 (enum type_instance_flag_value): Add
3555 TYPE_INSTANCE_FLAG_RESTRICT.
3556 (TYPE_RESTRICT): New macro.
3557 (make_restrict_type): Declare.
3559 2013-01-14 Tom Tromey <tromey@redhat.com>
3562 * psymtab.c (struct psymtab_state): New.
3563 (discard_psymtabs_upto, make_cleanup_discard_psymtabs): New
3565 * psympriv.h (make_cleanup_discard_psymtabs): Declare.
3566 * dwarf2read.c (dwarf2_build_psymtabs): Catch exceptions.
3568 2013-01-14 Richard Sharman <richard_sharman@mitel.com>
3569 Pedro Alves <palves@redhat.com>
3573 * remote.c (remote_threads_info): Make a copy of the reply from
3574 qfThreadInfo and use that instead of rs->buf.
3576 2013-01-14 Yao Qi <yao@codesourcery.com>
3578 * dbxread.c (dbx_psymtab_to_symtab_1): Don't check PST is NULL.
3579 (dbx_psymtab_to_symtab): Likewise.
3580 * dwarf2read.c (dwarf2_psymtab_to_symtab): Likewise.
3581 * mdebugread.c (mdebug_psymtab_to_symtab): Likewise.
3582 * xcoffread.c (xcoff_psymtab_to_symtab_1): Likewise.
3584 2013-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
3586 * parse.c (parse_exp_in_context): New variable inner_chain. Call
3587 make_cleanup_restore_current_language. Call set_language. Move
3588 OLD_CHAIN and INNER_CHAIN cleanups.
3589 * utils.c (do_restore_current_language)
3590 (make_cleanup_restore_current_language): New functions.
3591 * utils.h (make_cleanup_restore_current_language): New declaration.
3593 2013-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
3595 * source.c (symtab_to_fullname): Apply rewrite_source_path also for
3598 * source.c (symtab_to_fullname): Do not prepend DIRNAME for
3599 non-existing files if FILENAME is already absolute.
3601 2013-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3603 * macrocmd.c (macro_inform_no_debuginfo): Use puts_filtered instead of
3604 fputs_filtered. Append trailing newline.
3606 2013-01-11 Yao Qi <yao@codesourcery.com>
3607 Stan Shebs <stan@codesourcery.com>
3609 * psymtab.c (init_psymbol_list): Clarify the comment.
3611 2013-01-11 Yao Qi <yao@codesourcery.com>
3613 * breakpoint.c (print_one_breakpoint_location): Remove dead code.
3614 (update_dprintf_command_list): Assert that 'printf_line' is
3615 non-null. Remove condition check.
3617 2013-01-10 Jan Kratochvil <jan.kratochvil@redhat.com>
3620 * psymtab.c (psymtab_to_fullname, psymtab_to_fullname): Make the return
3622 * tui/tui-source.c (tui_source_is_displayed): Make the parameter fname
3624 * tui/tui-source.h (tui_source_is_displayed): Likewise.
3626 2013-01-09 Anthony Green <green@moxielogic.com>
3628 * cp-abi.c (cplus_print_vtable): Don't return value from void
3630 * ada-lang.c (re_set_catch_assert): Ditto.
3632 2013-01-09 Doug Evans <dje@google.com>
3634 * symfile.h (quick_symbol_functions): Delete member
3635 pre_expand_symtabs_matching. All uses removed.
3636 * dwarf2read.c (dw2_lookup_symbol): Implement.
3637 (dw2_do_expand_symtabs_matching): Delete.
3638 (dw2_pre_expand_symtabs_matching): Delete.
3639 (struct dw2_symtab_iterator): New type.
3640 (dw2_symtab_iter_init, dw2_symtab_iter_next): New functions.
3641 (dw2_expand_symtabs_for_function): Rewrite.
3642 (dwarf2_gdb_index_functions): Update.
3643 * psymtab.c (pre_expand_symtabs_matching_psymtabs): Delete.
3644 (psym_functions): Update.
3646 2013-01-09 Tom Tromey <tromey@redhat.com>
3648 * config/pa/hpux.mh (NATDEPFILES): Remove somread.o.
3649 * configure: Rebuild.
3650 * configure.ac: Add somread.o to the build if BFD has SOM
3652 * somread.c: Include som/aout.h, not syms.h.
3653 (som_symtab_read): Use som_external_symbol_dictionary_record.
3654 Unpack records manually.
3655 (_initialize_somread): Declare.
3657 2012-01-08 Mike Frysinger <vapier@gentoo.org>
3659 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx) [__x86_64__]:
3660 Cast return_address to 64bits.
3662 2013-01-08 Hui Zhu <hui_zhu@mentor.com>
3664 * printcmd.c: Remove define of function output_command.
3665 * tracepoint.c: Remove extern of function output_command.
3666 * valprint.h: (output_command): New extern.
3668 2013-01-07 Tom Tromey <tromey@redhat.com>
3670 * objc-lang.c (objc_emit_char, objc_printchar, objc_printstr):
3672 (objc_language_defn): Use c_printchar, c_printstr,
3675 2013-01-07 Tom Tromey <tromey@redhat.com>
3679 * ada-valprint.c (printstr, print_field_values): Remove
3681 * cp-valprint.c (cp_print_value_fields): Remove "inspect_it"
3683 * jv-valprint.c (java_print_value_fields): Remove "inspect_it"
3685 * m2-lang.c (m2_printstr): Remove "inspect_it" code.
3686 * main.c (captured_main): Remove "epoch" argument.
3687 * objc-lang.c (objc_printstr): Remove "inspect_it" code.
3688 * p-lang.c (pascal_printstr): Remove "inspect_it" code.
3689 * p-valprint.c (pascal_object_print_value_fields): Remove
3691 * printcmd.c (print_command_1): Remove 'inspect' argument.
3692 (print_command, call_command): Update.
3693 (inspect_command): Remove.
3694 (_initialize_printcmd): Make "inspect" an alias for "print".
3695 * top.c (epoch_interface): Remove.
3696 * top.h (epoch_interface): Remove.
3697 * valprint.c (user_print_options): Update.
3698 (print_converted_chars_to_obstack): Remove "inspect_it" code.
3699 * valprint.h (struct value_print_options) <inspect_it>: Remove
3702 2013-01-04 Tom Tromey <tromey@redhat.com>
3704 * valprint.h (read_string): Add 'extern'.
3706 2013-01-07 Joel Brobecker <brobecker@adacore.com>
3708 * darwin-nat.c: Fix typo in TASK_DYLD_INFO_COUNT macro test
3709 used to decide whether to define darwin_read_dyld_info or not.
3711 2013-01-03 Pierre Muller <muller@sourceware.org>
3713 * main.c (relocate_gdb_directory): Avoid calling stat function
3716 2013-01-03 Yao Qi <yao@codesourcery.com>
3718 * psymtab.c (fixup_psymbol_section): Update declaration.
3719 (fixup_psymbol_section): Remove code returning value.
3721 2013-01-03 Yao Qi <yao@codesourcery.com>
3723 * symtab.h: Remove some out of date comments.
3724 (enum exception_event_kind): Move it ...
3725 * breakpoint.c: ... here.
3727 2013-01-02 Iain Sandoe <developer@sandoe-acoustics.co.uk>
3730 * darwin-nat.c (darwin_read_dyld_info): Only build if
3731 TASK_DYLD_INFO_COUNT is defined.
3732 (darwin_xfer_partial): Call darwin_read_dyld_info only if
3733 TASK_DYLD_INFO_COUNT is defined.
3735 2013-01-02 Tom Tromey <tromey@redhat.com>
3737 * symfile.h (struct ecoff_debug_hack): Remove.
3738 * objfiles.c: Don't include mdebugread.h.
3740 2013-01-02 Tom Tromey <tromey@redhat.com>
3742 * config/i386/darwin.mh (NATDEPFILES): Remove machoread.o.
3743 * configure.ac: Check for Mach-O support in BFD. Update
3745 * configure: Rebuild.
3747 2013-01-02 Tom Tromey <tromey@redhat.com>
3749 * acinclude.m4 (GDB_AC_CHECK_BFD): New macro.
3750 * configure.ac: Use GDB_AC_CHECK_BFD.
3751 * configure: Rebuild.
3753 2013-01-01 Maxim Kuvyrkov <maxim.kuvyrkov@gmail.com>
3755 * MAINTAINERS: Update my email.
3757 2013-01-01 Joel Brobecker <brobecker@adacore.com>
3759 * cli/cli-script.h (make_cleanup_free_command_lines): Make extern.
3761 2013-01-01 Joel Brobecker <brobecker@adacore.com>
3763 * rs6000-nat.c (bss_data_overlap): New function.
3764 (vmap_symtab): Use it to adjust the .bss section's offset.
3766 2013-01-01 Joel Brobecker <brobecker@adacore.com>
3768 Update year range in copyright notice of all files.
3770 2013-01-01, 13 Joel Brobecker <brobecker@adacore.com>
3772 * top.c (print_gdb_version): Update copyright year.
3774 For older changes see ChangeLog-2012.
3780 version-control: never
projects / external / binutils.git / blob