1 2013-03-26 Pedro Alves <palves@redhat.com>
3 * record-full.c (record_full_insn_num): Make it unsigned.
4 (record_full_check_insn_num, record_full_message)
5 (record_full_registers_change, record_full_xfer_partial): Remove
6 record_full_insn_max_num check (it's always != 0).
7 (record_full_info, record_full_restore): Use %u as format string.
8 (): Use %u as format string.
9 (set_record_full_insn_max_num): Remove record_full_insn_max_num
10 check (it's always != 0).
12 2013-03-26 Pedro Alves <palves@redhat.com>
14 * dcache.c (_initialize_dcache): Make the "set dcache line-size"
15 and "set dcache size" commands zuinteger instead of uinteger.
17 2013-03-26 Pedro Alves <palves@redhat.com>
19 * cris-tdep.c (_initialize_cris_tdep): Make the "set cris-version"
20 command zuinteger instead of uinteger.
22 2013-03-26 Pedro Alves <palves@redhat.com>
24 * coff-pe-read.c (_initialize_coff_pe_read): Make the command
25 zuinteger instead of uinteger.
27 2013-03-26 Pedro Alves <palves@redhat.com>
29 * record.c (record_insn_history_size_setshow_var)
30 (record_call_history_size_setshow_var): New globals.
31 (command_size_to_target_size): New function.
32 (cmd_record_insn_history, cmd_record_call_history): Use
33 command_size_to_target_size instead of cast.
34 (validate_history_size, set_record_insn_history_size)
35 (set_record_call_history_size): New functions.
36 (_initialize_record): Install set_record_insn_history_size and
37 set_record_call_history_size as "set" hooks of "set record
38 instruction-history-size" and "set record
39 function-call-history-size".
41 2013-03-26 Pedro Alves <palves@redhat.com>
43 * top.c (gdb_rl_operate_and_get_next): Replace max_input_history
44 use with history_max_entries use. Remove FIXME note.
46 2013-03-26 Markus Metzger <markus.t.metzger@intel.com>
48 * record-btrace.c (record_btrace_close): Call
49 record_btrace_auto_disable.
51 2013-03-25 Joel Brobecker <brobecker@adacore.com>
53 * rs6000-nat.c (fixup_breakpoints): Delete declaration.
55 2013-03-25 Doug Evans <dje@google.com>
57 * contrib/cc-with-tweaks.sh: Check exit code of dwp.
59 2013-03-25 Tom Tromey <tromey@redhat.com>
62 * c-exp.y (exp): Add new productions for destructors after '.' and
64 (write_destructor_name): New function.
66 2013-03-25 Tom Tromey <tromey@redhat.com>
69 * opencl-lang.c (evaluate_subexp_opencl) <STRUCTOP_STRUCT>: Use
70 value_struct_elt, not lookup_struct_elt_type.
71 * eval.c (evaluate_subexp_standard) <STRUCTOP_STRUCT,
72 STRUCTOP_PTR>: Use value_struct_elt, not lookup_struct_elt_type.
73 * expression.h (EVAL_AVOID_SIDE_EFFECTS): Update comment.
75 2013-03-25 Yao Qi <yao@codesourcery.com>
77 * ctf.c [USE_WIN32API]: Undef 'mkdir' and use 'mkdir'
80 2013-03-23 Eli Zaretskii <eliz@gnu.org>
82 * windows-nat.c (windows_get_absolute_argv0): New function.
83 * windows-nat.h: Add its prototype.
85 * main.c (get_init_files): Use filename_ncmp instead of strncmp.
86 Use IS_DIR_SEPARATOR instead of looking for a character inside
87 SLASH_STRING. Include filenames.h.
88 (captured_main) [__MINGW32__]: Make argv[0] absolute, so that
89 relocate_gdb_directory works when passed gdb_program_name.
90 Include windows-nat.h.
92 2013-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
94 * exceptions.h (enum errors): New entry TARGET_CLOSE_ERROR.
95 * remote.c (trace_error): Remove the special handling of '2'.
96 (readchar) <SERIAL_EOF>
97 (readchar) <SERIAL_ERROR>
98 (getpkt_or_notif_sane_1): Use TARGET_CLOSE_ERROR for them.
99 (remote_get_trace_status): Call throw_exception if EX is
101 * utils.c (perror_with_name): Rename to ...
102 (throw_perror_with_name): ... here. New parameter errcode, describe it
103 in the function comment.
104 (perror_with_name): New function wrapper.
105 * utils.h (enum errors): New stub declaration.
106 (throw_perror_with_name): New declaration.
108 2013-03-22 Pedro Alves <palves@redhat.com>
109 Yao Qi <yao@codesourcery.com>
110 Mark Kettenis <kettenis@gnu.org>
112 * cli/cli-setshow.c (do_set_command) <var_uinteger>:
113 Don't let the user set the value to UINT_MAX directly.
114 <var_integer>: Don't let the user set the value to INT_MAX
117 2013-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
119 * remote.c (remote_unpush_target): New function.
120 (remote_open_1): Remove two pop_target calls, update one comment, add
121 comment to target_preopen call. Replace pop_target call by
122 remote_unpush_target call.
123 (interrupt_query, readchar, getpkt_or_notif_sane_1): Replace
124 pop_target calls by remote_unpush_target calls.
126 2013-03-22 Pedro Alves <palves@redhat.com>
128 * linux-nat.c (linux_child_follow_fork): Don't call
129 linux_enable_event_reporting.
130 (linux_handle_extended_wait): Don't call
131 linux_enable_event_reporting.
133 2013-03-22 Pedro Alves <palves@redhat.com>
135 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Define INSN macro,
136 use it to rewrite the trampoline buffers with type gdb_byte[], and
137 undefine the macro. Remove char* cast.
139 2013-03-21 Doug Evans <dje@google.com>
141 New commands "mt set per-command {space,time,symtab} {on,off}".
143 * event-top.c: #include "maint.h".
144 * main.c: #include "maint.h".
145 * maint.c: #include <sys/time.h>, <time.h>, block.h, top.h,
146 timeval-utils.h, maint.h, cli/cli-setshow.h.
147 (per_command_time, per_command_space): New static globals.
148 (per_command_symtab): New static global.
149 (per_command_setlist, per_command_showlist): New static globals.
150 (struct cmd_stats): Move here from utils.c.
151 (set_per_command_time): Renamed from set_display_time in utils.c
152 and moved here. All callers updated.
153 (set_per_command_space): Renamed from set_display_space in utils.c
154 and moved here. All callers updated.
155 (count_symtabs_and_blocks): New function.
156 (report_command_stats): Moved here from utils.c. Add support for
157 printing symtab stats. Only print data if enabled before command
159 (make_command_stats_cleanup): Ditto.
160 (sert_per_command_cmd, show_per_command_cmd): New functions.
161 (_initialize_maint_cmds): Add new commands
162 mt set per-command {space,time,symtab} {on,off}.
164 * top.c: #include "maint.h".
165 * utils.c (reset_prompt_for_continue_wait_time): New function.
166 (get_prompt_for_continue_wait_time): New function.
167 * utils.h (reset_prompt_for_continue_wait_time): Declare
168 (get_prompt_for_continue_wait_time): Declare.
169 (make_command_stats_cleanup): Moved to maint.h.
170 (set_display_time, set_display_space): Moved to maint.h and renamed
171 to set_per_command_time, set_per_command_space.
172 * cli/cli-setshow.c (parse_cli_boolean_value): Renamed from
173 parse_binary_operation and made non-static. Don't call error,
174 just return an error marker. All callers updated.
175 * cli/cli-setshow.h (parse_cli_boolean_value): Declare.
177 2013-03-21 Tom Tromey <tromey@redhat.com>
179 * symfile.c (alloc_section_addr_info): Update header. Don't set
180 'num_sections' field.
181 (build_section_addr_info_from_section_table): Set 'num_sections'.
182 (build_section_addr_info_from_bfd): Likewise.
183 (build_section_addr_info_from_objfile): Remove dead loop
185 (free_section_addr_info): Unconditionally call xfree.
186 (relative_addr_info_to_section_offsets, addrs_section_sort)
187 (addr_info_make_relative, syms_from_objfile_1): Remove dead loop
189 (syms_from_objfile_1): Remove dead 'if' condition. Check
191 (add_symbol_file_command): Set 'num_sections'.
192 * symfile-mem.c (symbol_file_add_from_memory): Set
194 * somread.c (som_symfile_offsets): Remove dead loop condition.
195 * machoread.c (macho_symfile_offsets): Remove dead 'if'.
196 * jit.c (jit_bfd_try_read_symtab): Set 'num_sections'.
198 2013-03-21 Tom Tromey <tromey@redhat.com>
200 * tracepoint.h (decode_agent_options): Add 'trace_string'
202 * tracepoint.c (decode_agent_options): Add 'trace_string'
204 (validate_actionline): Update.
205 (collect_symbol): Add 'trace_string' argument.
206 (struct add_local_symbols_data) <trace_string>: New field.
207 (do_collect_symbol): Update.
208 (add_local_symbols): Add 'trace_string' argument.
209 (encode_actions_1): Update.
210 (trace_dump_actions): Update.
211 * dwarf2loc.c (access_memory): Update.
212 * ax.h (struct agent_expr) <tracing, trace_string>: New fields.
213 * ax-general.c (new_agent_expr): Update.
214 * ax-gdb.h (gen_trace_for_expr, gen_trace_for_var)
215 (gen_trace_for_return_address): Add argument.
216 (trace_kludge, trace_string_kludge): Remove.
217 * ax-gdb.c (trace_kludge, trace_string_kludge): Remove.
218 (gen_traced_pop, gen_fetch, gen_bitfield_ref, gen_expr): Update.
219 (gen_trace_for_var): Add 'trace_string' argument.
220 (gen_trace_for_expr, gen_trace_for_return_address): Likewise.
221 (gen_printf, agent_eval_command_one): Update.
223 2013-03-21 Tom Tromey <tromey@redhat.com>
226 * c-exp.y (yylex): Rewrite to push all tokens onto the FIFO.
227 Handle FILENAME token.
229 2013-03-21 Tom Tromey <tromey@redhat.com>
231 * c-exp.y (YYPRINT): Define.
232 (c_print_token): New function.
234 2013-03-21 Tom Tromey <tromey@redhat.com>
236 * c-exp.y (%union) <sym, ivar, ivec>: Remove.
238 2013-03-21 Yao Qi <yao@codesourcery.com>
240 * ctf.c: Include "gdb_stat.h".
241 [USE_WIN32API]: New macro 'mkdir'.
242 (ctf_start): Use permission bits macros if they are defined.
244 2013-03-20 Keith Seitz <keiths@redhat.com>
246 * breakpoint.h (struct breakpoint): Add comment to
247 extra_string indicating that this member is mallod'd.
248 * breakpoint.c (base_breakpoint_dtor): Free extra_string.
250 2013-03-20 Pedro Alves <palves@redhat.com>
254 * cli/cli-setshow.c (do_set_command)
255 <var_uinteger, var_zuinteger>: Use LONGEST for variable holding
256 the result of parsing the command argument. Throw error if the
257 value is greater than UINT_MAX. Print the invalid value with
259 <var_integer, var_zinteger>: Use LONGEST for variable holding the
260 result of parsing the command argument. Throw error if the value
261 is greater than INT_MAX, not greater or equal. Also throw error
262 if the value is less than INT_MIN. Print the invalid value with
264 <var_zuinteger_unlimited>: Throw error if the value is greater
265 than INT_MAX, not greater or equal.
266 (do_show_command) <var_integer, var_zinteger,
267 var_zuinteger_unlimited>: Use %d for printing int, not %u.
269 2013-03-20 Tom Tromey <tromey@redhat.com>
271 * ax-gdb.c (gen_var_ref): Unconditionally call via computed ops,
273 * dwarf2read.c (read_func_scope): Remove old FIXME.
274 * eval.c (evaluate_subexp_standard): Check SYMBOL_COMPUTED_OPS,
276 * findvar.c (symbol_read_needs_frame, default_read_var_value):
277 Unconditionally call via computed ops, if possible.
278 * printcmd.c (address_info): Unconditionally call via computed ops,
280 * stack.c (read_frame_arg): Unconditionally call via computed ops,
282 * symtab.c (register_symbol_computed_impl): Sanity check 'ops'.
283 * tracepoint.c (scope_info): Unconditionally call via computed ops,
286 2013-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
287 Tom Tromey <tromey@redhat.com>
290 * coffread.c (coff_register_index): New global.
291 (process_coff_symbol, coff_read_enum_type): Set
293 (_initialize_coffread): Initialize new global.
294 * dwarf2loc.c (locexpr_find_frame_base_location)
295 (dwarf2_block_frame_base_locexpr_funcs)
296 (loclist_find_frame_base_location)
297 (dwarf2_block_frame_base_loclist_funcs): New.
298 (dwarf_expr_frame_base_1): Call SYMBOL_BLOCK_OPS, remove internal_error.
299 (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Add location_has_loclist.
300 * dwarf2loc.h (dwarf2_block_frame_base_locexpr_funcs)
301 (dwarf2_block_frame_base_loclist_funcs): New.
302 * dwarf2read.c (dwarf2_locexpr_index, dwarf2_loclist_index)
303 (dwarf2_locexpr_block_index, dwarf2_loclist_block_index): New
305 (read_func_scope): Update.
306 (fixup_go_packaging, mark_common_block_symbol_computed)
307 (var_decode_location, new_symbol_full, dwarf2_const_value):
308 Set SYMBOL_ACLASS_INDEX.
309 (dwarf2_symbol_mark_computed): Likewise. Add 'is_block' argument.
310 (_initialize_dwarf2_read): Initialize new globals.
311 * jit.c (finalize_symtab): Set SYMBOL_ACLASS_INDEX.
312 * jv-lang.c (add_class_symbol): Set SYMBOL_ACLASS_INDEX.
313 * mdebugread.c (mdebug_register_index, mdebug_regparm_index): New
315 (parse_symbol, psymtab_to_symtab_1): Set SYMBOL_ACLASS_INDEX.
316 (_initialize_mdebugread): Initialize new globals.
317 * psympriv.h (struct partial_symbol) <aclass>: Update comment.
318 * stabsread.c (patch_block_stabs): Set SYMBOL_ACLASS_INDEX.
319 (stab_register_index, stab_regparm_index): New globals.
320 (define_symbol, read_enum_type, common_block_end): Set
322 (_initialize_stabsread): Initialize new globals.
323 * symtab.c (next_aclass_value, symbol_impl, symbol_impls): New
325 (MAX_SYMBOL_IMPLS): New define.
326 (register_symbol_computed_impl, register_symbol_block_impl)
327 (register_symbol_register_impl)
328 (initialize_ordinary_address_classes): New functions.
329 (_initialize_symtab): Call initialize_ordinary_address_classes.
330 * symtab.h (enum address_class) <LOC_FINAL_VALUE>: New constant.
331 (struct symbol_impl): New.
332 (SYMBOL_ACLASS_BITS): New define.
333 (struct symbol) <aclass, ops>: Remove fields.
334 <aclass_index>: New field.
335 (symbol_impls): Declare.
336 (SYMBOL_CLASS, SYMBOL_COMPUTED_OPS, SYMBOL_REGISTER_OPS): Redefine.
337 (SYMBOL_IMPL, SYMBOL_ACLASS_INDEX): New defines.
338 (register_symbol_computed_impl, register_symbol_block_impl)
339 (register_symbol_register_impl): Declare.
340 (struct symbol_computed_ops): Add location_has_loclist.
341 (struct symbol_block_ops): New.
342 (SYMBOL_BLOCK_OPS): New.
343 * xcoffread.c (process_xcoff_symbol): Set SYMBOL_ACLASS_INDEX.
345 2013-03-20 Tom Tromey <tromey@redhat.com>
347 * psymtab.c (find_pc_sect_psymbol, fixup_psymbol_section)
348 (print_partial_symbols, recursively_search_psymtabs): Use
351 2013-03-20 Pierre Muller <muller@sourceware.org>
353 * contrib/ari/gdb_ari.sh (OP eol rule): Also check
354 addtion, subtraction, multiplication and division binary operator.
356 2013-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
359 * bfd-target.c (target_bfd_xclose): Remove parameter quitting.
360 * bsd-kvm.c (bsd_kvm_close): Likewise.
361 * bsd-uthread.c (bsd_uthread_close): Likewise.
362 * corelow.c (core_close): Likewise.
363 (core_close_cleanup): Remove parameter quitting from a caller.
364 * event-top.c (async_disconnect): Likewise.
365 * exec.c (exec_close_1): Remove parameter quitting.
366 * go32-nat.c (go32_close): Likewise.
367 * linux-nat.c (linux_nat_close): Remove parameter quitting. Remove
368 parameter quitting from a caller.
369 * mips-linux-nat.c (super_close): Remove parameter quitting from the
371 (mips_linux_close): Remove parameter quitting. Remove parameter
372 quitting from a caller.
373 * monitor.c (monitor_close): Remove parameter quitting.
374 * monitor.h (monitor_close): Likewise.
375 * record-btrace.c (record_btrace_close): Likewise.
376 * record-full.c (record_full_close): Likewise.
377 * remote-m32r-sdi.c (m32r_close): Remove parameter quitting and remove
378 it also from fprintf_unfiltered.
379 * remote-mips.c (mips_close): Remove parameter quitting.
380 (mips_detach): Remove parameter quitting from a caller.
381 * remote-sim.c (gdbsim_close): Remove parameter quitting.
382 (gdbsim_close): Remove duplicate function comment. Remove parameter
383 quitting and remove it also from printf_filtered.
384 * remote.c (remote_close): Remove parameter quitting.
385 * solib-svr4.c (enable_break): Remove parameter quitting from a caller.
386 * target.c (update_current_target): Remove parameter int from to_close
388 (push_target, unpush_target, pop_target): Remove parameter quitting from
390 (pop_all_targets_above, pop_all_targets): Remove parameter quitting.
391 Remove parameter quitting from a caller.
392 (target_preopen): Remove parameter quitting from a caller.
393 (target_close): Remove parameter quitting. Remove parameter quitting
394 from a caller two times. Remove parameter quitting also from
396 * target.h (struct target_ops): Remove parameter quitting and as int
397 from fields to_xclose and to_close.
398 (extern struct target_ops current_target):
399 (target_close, pop_all_targets): Remove parameter quitting. Update the
401 (pop_all_targets_above): Remove parameter quitting.
402 * top.c (quit_target): Remove parameter quitting from a caller.
403 * tracepoint.c (tfile_close): Remove parameter quitting.
404 * windows-nat.c (windows_close): Remove parameter quitting.
406 2013-03-20 Corinna Vinschen <vinschen@redhat.com>
408 * windows-nat.c (handle_output_debug_string): Replace call
409 to string_to_core_addr with call to strtoull.
411 2013-03-20 Yao Qi <yao@codesourcery.com>
413 * ctf.c (ctf_save_metadata_header): Define macro HOST_ENDIANNESS
414 and write it to CTF metadata.
416 2013-03-19 Corinna Vinschen <vinschen@redhat.com>
418 * windows-nat.c (handle_output_debug_string): Change type of n to
419 SIZE_T to avoid crash on 64 bit systems.
421 2013-03-17 Eli Zaretskii <eliz@gnu.org>
423 * python/python-internal.h (HAVE_SNPRINTF)
424 [_WIN32 && HAVE_DECL_SNPRINTF]: Define, to avoid compiler warnings
425 about redefinition of snprintf by pyerrors.h.
427 2013-03-15 Steve Ellcey <sellcey@mips.com>
429 * remote-sim.c (sim_command_completer): Make char arguments const.
431 2013-03-15 Tom Tromey <tromey@redhat.com>
434 * gdbtypes.c (types_equal): Handle TYPE_CODE_FUNC.
436 2013-03-14 Tom Tromey <tromey@redhat.com>
438 * gdb_bfd.c (struct gdb_bfd_data) <crc_computed, crc>:
440 (get_file_crc): Move from symfile.c.
441 (gdb_bfd_crc): New function.
442 * gdb_bfd.h (gdb_bfd_crc): Declare.
443 * objfiles.h (struct objfile) <crc32, crc32_p>: Remove.
444 * symfile.c (get_file_crc): Move to gdb_bfd.c.
445 (separate_debug_file_exists): Use gdb_bfd_crc.
447 2013-03-14 Tom Tromey <tromey@redhat.com>
449 * symfile.c (get_debug_link_info): Remove.
450 (find_separate_debug_file_by_debuglink): Use
451 bfd_get_debug_link_info.
453 2013-03-14 Tom Tromey <tromey@redhat.com>
455 * symtab.c (error_in_psymtab_expansion): New function.
456 (lookup_symbol_aux_quick)
457 (basic_lookup_transparent_type_quick): Remove "last resort"
458 code. Use error_in_psymtab_expansion.
460 2013-03-14 Doug Evans <dje@google.com>
461 Jan Kratochvil <jan.kratochvil@redhat.com>
463 * dwarf2read.c (dw2_map_symtabs_matching_filename): Put continue after
464 any successful compare_filenames_for_search or FILENAME_CMP.
465 * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
466 * symtab.c (iterate_over_some_symtabs): Likewise.
468 2013-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
470 * source.c (print_source_lines_base): Make a local copy of
473 2013-03-14 Hui Zhu <hui_zhu@mentor.com>
474 Jan Kratochvil <jan.kratochvil@redhat.com>
476 * source.c (print_source_lines_base): Suppress "file" for TUI.
478 2013-03-14 Keith Seitz <keiths@redhat.com>
479 Alan Matsuoka <alanm@redhat.com>
483 * cp-namespace.c (cp_lookup_nested_symbol): Handle TYPE_CODE_FUNC and
485 * elfread.c (elf_symtab_read): Handle BSF_GNU_UNIQUE for certain
488 2013-03-14 Yao Qi <yao@codesourcery.com>
490 * tracepoint.c (tfile_write_status): Write 'stop_desc' of trace
491 status to tfile if trace is stopped by command 'tstop'.
493 2013-03-14 Yao Qi <yao@codesourcery.com>
495 * tracepoint.c (tfile_write_status): Write trace notes and user
496 name into tfile if they are not NULL.
498 2013-03-14 Hui Zhu <hui@codesourcery.com>
499 Yao Qi <yao@codesourcery.com>
501 * Makefile.in (REMOTE_OBS): Add ctf.o.
503 (HFILES_NO_SRCDIR): Add ctf.h.
504 * ctf.c, ctf.h: New files.
505 * tracepoint.c: Include 'ctf.h'.
506 (collect_pseudocommand): Remove static.
507 (trace_save_command): Parse option "-ctf".
508 Produce different trace file writers per option.
509 Adjust output message.
510 (trace_save_tfile, trace_save_ctf): New.
511 * tracepoint.h (trace_save_tfile, trace_save_ctf): Declare.
512 * mi/mi-main.c: Include 'ctf.h'.
513 (mi_cmd_trace_save): Handle option '-ctf'. Call either
514 trace_save_tfile or trace_save_ctf.
515 * NEWS: Mention these changes.
517 2013-03-14 Yao Qi <yao@codesourcery.com>
519 * tracepoint.c (trace_file_writer_xfree): New.
520 (struct tfile_writer_data): New.
521 (tfile_dtor, tfile_can_target_save, tfile_start): New.
522 (tfile_write_header, tfile_write_regblock_type): New.
523 (tfile_write_status, tfile_write_uploaded_tsv): New.
524 (tfile_write_uploaded_tp, tfile_write_definition_end): New.
525 (tfile_write_raw_data, (tfile_end): New.
526 (tfile_write_ops): New global variable.
527 (TRACE_WRITE_R_BLOCK): New macro.
528 (TRACE_WRITE_M_BLOCK_HEADER): New macro.
529 (TRACE_WRITE_M_BLOCK_MEMORY): New macro.
530 (TRACE_WRITE_V_BLOCK): New macro.
531 (trace_save): Add extra one parameter WRITER. Make it static.
532 Use WRITER to writer trace.
533 (tfile_trace_file_writer_new): New.
534 (trace_save_command): Caller update.
535 (trace_save_tfile): Write trace data in TFILE format.
536 * tracepoint.h (struct trace_frame_write_ops): New.
537 (struct trace_file_write_ops): New.
538 (struct trace_file_writer): New.
539 (trace_save): Remove its declaration.
540 (trace_save_tfile): Declare it.
541 * mi/mi-main.c (mi_cmd_trace_save): Call trace_save_tfile
542 instead of trace_save.
544 2013-03-13 Pedro Alves <palves@redhat.com>
546 * hppa-hpux-nat.c (hppa_hpux_save_state_offset): Make static.
548 2013-03-13 Pedro Alves <palves@redhat.com>
550 * dbxread.c (read_ofile_symtab, process_one_symbol): Remove
552 * demangle.c (current_demangling_style_string): Make it const.
553 (set_demangling_command): Assert the demangling style is known.
554 Remove all handling of unknown styles. Set
555 'current_demangling_style_string' to an element of the
556 demangling_style_names array.
557 (set_demangling_style): Delete.
558 (_initialize_demangler): Set current_demangling_style_string to the
559 element of the demangling_style_names array that corresponds to
560 the default demangling style. Remove FIXME note. Don't call
561 set_demangling_style.
562 * gdb-demangle.h (set_demangling_style): Remove declaration.
564 2013-03-13 Pedro Alves <palves@redhat.com>
566 * ada-lang.c (struct add_partial_datum) <text, text0, word>: Make
568 (ada_make_symbol_completion_list): Make "text0" parameter const.
569 * ax-gdb.c (agent_eval_command_one): Make "exp" parameter const.
570 * breakpoint.c (condition_completer): Make "text" and "word"
571 parameters const. Adjust.
572 (check_tracepoint_command): Adjust to validate_actionline
574 (catch_syscall_completer): Make "text" and "word" parameters
576 * cli/cli-cmds.c (show_user): Make "comname" local const.
577 (valid_command_p): Make "command" parameter const.
578 (alias_command): Make "alias_prefix" and "command_prefix" locals
580 * cli/cli-decode.c (add_cmd): Make "name" parameter const.
581 (add_alias_cmd): Make "name" and "oldname" parameters const.
582 Adjust. No longer make copy of OLDNAME.
583 (add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd)
584 (add_setshow_cmd_full, add_setshow_enum_cmd)
585 (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
586 (add_setshow_filename_cmd, add_setshow_string_cmd)
587 (add_setshow_string_noescape_cmd)
588 (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
589 (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
590 (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd)
591 (delete_cmd, add_info, add_info_alias, add_com, add_com_alias):
592 Make "name" parameter const.
593 (help_cmd): Rename "command" parameter to "arg". New const local
595 (find_cmd): Make "command" parameter const.
596 (lookup_cmd_1): Make "text" parameter pointer to const. Adjust to
597 deprecated_cmd_warning prototype change.
598 (undef_cmd_error): Make "cmdtype" parameter const.
599 (lookup_cmd): Make "line" parameter const.
600 (deprecated_cmd_warning): Change type of "text" parameter to
601 pointer to const char, from pointer to pointer to char. Adjust.
602 (lookup_cmd_composition): Make "text" parameter const.
603 (complete_on_cmdlist, complete_on_enum): Make "text" and "word"
605 * cli/cli-decode.h (struct cmd_list_element) <name>: Make field
607 * cli/cli-script.c (validate_comname): Make "tem" local const.
608 (define_command): New const local "tem_c". Use it in calls to
610 (document_command): Make "tem" and "comfull" locals const.
611 (show_user_1): Make "prefix" and "name" parameters const.
612 * cli-script.h (show_user_1): Make "prefix" and "name" parameters
614 * command.h (add_cmd, add_alias_cmd, add_prefix_cmd)
615 (add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1)
616 (deprecated_cmd_warning, lookup_cmd_composition, add_com)
617 (add_com_alias, add_info, add_info_alias, complete_on_cmdlist)
618 (complete_on_enum, add_setshow_enum_cmd)
619 (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
620 (add_setshow_filename_cmd, add_setshow_string_cmd)
621 (add_setshow_string_noescape_cmd)
622 (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
623 (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
624 (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
625 Change prototypes, constifying strings.
626 * completer.c (noop_completer, filename_completer): Make "text"
627 and "prefix" parameters const.
628 (location_completer, expression_completer)
629 (complete_line_internal): Make "text" and "prefix" parameters
631 (command_completer, signal_completer): Make "text" and "prefix"
633 * completer.h (noop_completer, filename_completer)
634 (expression_completer, location_completer, command_completer)
635 (signal_completer): Change prototypes.
636 * corefile.c (complete_set_gnutarget): Make "text" and "word"
638 * cp-abi.c (cp_abi_completer): Likewise.
639 * expression.h (parse_expression_for_completion): Change
641 * f-lang.c (f_make_symbol_completion_list): Make "text" and "word"
643 * infcmd.c (_initialize_infcmd): Make "cmd_name" local const.
644 * infrun.c (handle_completer): Make "text" and "word" parameters
646 * interps.c (interpreter_completer): Make "text" and "word"
648 * language.h (struct language_defn)
649 <la_make_symbol_completion_list>: Make "text" and "word"
651 * parse.c (parse_exp_1): Move const hack to parse_exp_in_context.
652 (parse_exp_in_context): Rename to ...
653 (parse_exp_in_context_1): ... this.
654 (parse_exp_in_context): Reimplement, with const hack from
656 (parse_expression_for_completion): Make "string" parameter const.
657 * printcmd.c (decode_format): Make "string_ptr" parameter pointer
658 to pointer to const char. Adjust.
659 (print_command_1): Make "exp" parameter const.
660 (output_command): Rename to ...
661 (output_command_const): ... this. Make "exp" parameter const.
662 (output_command): Reimplement.
664 (display_command): Rename "exp" parameter to "arg". New "exp"
665 local, const version of "arg".
666 * python/py-auto-load.c (gdbpy_initialize_auto_load): Make
667 "cmd_name" local const.
668 * python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree
670 (cmdpy_completer): Make "text" and "word" parameters const.
671 (gdbpy_parse_command_name): Make "prefix_text2" local const.
672 * python/py-param.c (add_setshow_generic): Make "tmp_name" local
674 * remote.c (_initialize_remote): Make "cmd_name" local const.
675 * symtab.c (language_search_unquoted_string): Make "text" and "p"
676 parameters const. Adjust.
677 (completion_list_add_fields): Make "sym_text", "text" and "word"
679 (struct add_name_data) <sym_text, text, word>: Make fields const.
680 (default_make_symbol_completion_list_break_on): Make "text" and
681 "word" parameters const. Adjust locals.
682 (default_make_symbol_completion_list)
683 (make_symbol_completion_list, make_symbol_completion_type)
684 (make_symbol_completion_list_fn): Make "text" and "word"
686 (make_file_symbol_completion_list): Make "text", "word" and
687 "srcfile" parameters const. Adjust locals.
688 (add_filename_to_list): Make "text" and "word" parameters const.
689 (struct add_partial_filename_data) <text, word>: Make fields
691 (make_source_files_completion_list): Make "text" and "word"
693 * symtab.h (default_make_symbol_completion_list_break_on)
694 (default_make_symbol_completion_list, make_symbol_completion_list)
695 (make_symbol_completion_type enum type_code)
696 (make_symbol_completion_list_fn make_file_symbol_completion_list)
697 (make_source_files_completion_list): Change prototype.
698 * top.c (execute_command): Adjust to pass pointer to pointer to
699 const char to lookup_cmd, and to deprecated_cmd_warning prototype
701 (set_verbose): Make "cmdname" local const.
702 * tracepoint.c (decode_agent_options): Make "exp" parameter const,
704 (validate_actionline): Make "line" parameter a pointer to const
706 (encode_actions_1): Make "action_exp" local const, and adjust.
707 (encode_actions): Adjust.
708 (replace_comma): Delete.
709 (trace_dump_actions): Make "action_exp" and "next_comma" locals
710 const, and adjust. Don't frob the action string while splitting
711 it at commas. Instead, make a copy of each split substring in
713 (trace_dump_command): Adjust to validate_actionline prototype
715 * tracepoint.h (decode_agent_options, decode_agent_options)
716 (encode_actions, validate_actionline): Change prototypes.
717 * valprint.h (output_command): Delete declaration.
718 (output_command_const): Declare.
719 * value.c (function_destroyer): Cast const away in xfree call.
721 2013-03-13 Pedro Alves <palves@redhat.com>
723 * ada-lang.c (ada_decode_symbol): Cast away constness of GSYMBOL
724 rather than casting 'const char * const *' to 'const char **'.
725 * ada-lex.l (processInt): Make "trailer" local const. Remove
726 'const char **' cast.
727 * arm-linux-tdep.c (arm_stap_parse_special_token): Add 'char *'
728 locals, and use those as strtol output pointer, instead than doing
729 invalid casts to from 'const char **' to 'char **'.
730 (_initialize_demangle): Remove cast.
731 * i386-tdep.c (i386_stap_parse_special_token): : Add 'char *'
732 locals, and use those as strtol output pointer, instead than doing
733 invalid casts to from 'const char **' to 'char **'.
734 * solib-dsbt.c (dsbt_get_initial_loadmaps): Remove 'gdb_byte**'
736 * stap-probe.c (stap_parse_register_operand)
737 (stap_parse_single_operand): Likewise.
739 2013-03-13 Yao Qi <yao@codesourcery.com>
741 * tracepoint.c (tfile_get_trace_state_variable_value): Look for
742 the last matched 'V' blcok in trace frame.
744 2013-03-12 Joel Brobecker <brobecker@adacore.com>
746 * NEWS: Create a new section for the next release branch.
747 Rename the section of the current branch, now that it has
750 2013-03-12 Joel Brobecker <brobecker@adacore.com>
752 GDB 7.6 branch created (branch timestamp: 2013-03-12 22:15 UTC)
753 * version.in: Bump version to 7.6.50.20130312-cvs.
755 2013-03-12 Keith Seitz <keiths@redhat.com>
757 * mi/mi-cmds.h (mi_execute_command): Make "cmd" const.
758 * mi/mi-interp.c (mi_interpreter_exec): Make "command" const.
759 Remove temporary copy of input string.
760 (mi_execute_command_wrapper): Make "cmd" const.
761 * mi/mi-main.c (mi_execute_command): Make "string_ptr" const.
762 * mi/mi-parse.c (mi_parse_argv): Make "args" const.
764 (mi_parse): Make "cmd" const.
766 * mi/mi-parse.h (mi_parse): Make "cmd" const.
768 2013-03-12 Keith Seitz <keiths@redhat.com>
770 * ada-lang.c (ada_read_renaming_var_value): Pass const
771 pointer to expression string to parse_exp_1.
772 (create_excep_cond_exprs): Likewise.
773 * ax-gdb.c (agent_eval_command_one): Likewise.
774 (maint_agent_printf_command): Likewise.
775 Constify much of the string handling/parsing.
776 * breakpoint.c (set_breakpoint_condition): Pass const
777 pointer to expression string to parse_exp_1.
778 (update_watchpoint): Likewise.
779 (parse_cmd_to_aexpr): Constify string handling.
780 Pass const pointer to parse_exp_1.
781 (init_breakpoint_sal): Pass const pointer to parse_exp_1.
782 (find_condition_and_thread): Likewise.
784 (watch_command_1): Make "arg" const.
785 Constify string handling.
786 Copy the expression string instead of changing the input
788 (update_breakpoint_location): Pass const pointer to
790 * eval.c (parse_and_eval_address): Make "exp" const.
791 (parse_to_comma_and_eval): Make "expp" const.
792 (parse_and_eval): Make "exp" const.
793 * expression.h (parse_expression): Make argument const.
794 (parse_exp_1): Make first argument const.
795 * findcmd.c (parse_find_args): Treat "args" as const.
796 * linespec.c (parse_linespec): Pass const pointer to
797 linespec_expression_to_pc.
798 (linespec_expression_to_pc): Make "exp_ptr" const.
799 * parse.c (parse_exp_1): Make "stringptr" const.
800 Make a copy of the expression to pass to parse_exp_in_context until
801 this whole interface can be constified.
802 (parse_expression): Make "string" const.
803 * printcmd.c (ui_printf): Treat "arg" as const.
804 Handle const strings.
805 * tracepoint.c (validate_actionline): Pass const pointer to
806 all calls to parse_exp_1.
807 (encode_actions_1): Likewise.
808 * value.h (parse_to_comma_and_eval): Make argument const.
809 (parse_and_eval_address): Likewise.
810 (parse_and_eval): Likewise.
811 * varobj.c (varobj_create): Pass const pointer to parse_exp_1.
812 (varobj_set_value): Likewise.
813 * cli/cli-cmds.c (disassemble_command): Treat "arg" as const and
814 constify string handling.
815 Pass const pointers to parse_and_eval_address and
816 parse_to_comman_and_eval.
817 * cli/cli-utils.c (skip_to_space): Rename to ...
818 (skip_to_space_const): ... this. Handle const strings.
819 * cli/cli-utils.h (skip_to_space): Turn into macro which invokes
821 (skip_to_space_const): Declare.
822 * common/format.c (parse_format_string): Make "arg" const.
823 Handle const strings.
824 * common/format.h (parse_format_string): Make "arg" const.
825 * gdbserver/ax.c (ax_printf): Make "format" const.
826 * python/python.c (gdbpy_parse_and_eval): Do not make a copy
827 of the expression string.
829 2013-03-12 Hui Zhu <hui@codesourcery.com>
831 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Update error message.
833 2013-03-12 Yao Qi <yao@codesourcery.com>
834 Hui Zhu <hui@codesourcery.com>
836 * dwarf2loc.c (access_memory): Change nbits to nbytes in gdb_assert.
837 (dwarf2_compile_expr_to_ax): Call access_memory in DW_OP_deref and
840 2013-03-12 Paul Hilfinger <hilfingr@adacore.com>
842 * ada-lex.l (rules): Only recognize 'thread' as a
843 delimiter when followed by numerals, as for c-exp.y.
844 Use new rewind_to_char function to rewind the input for
845 expression-delimiting tokens.
846 (rewind_to_char): New function.
848 2013-03-11 Pedro Alves <palves@redhat.com>
849 Jan Kratochvil <jan.kratochvil@redhat.com>
851 * configure: Regenerate.
852 * configure.ac (check dynamic export flag): Link python test with
855 2013-03-11 Doug Evans <dje@google.com>
856 Keith Seitz <keiths@redhat.com>
858 * linespec.c (find_linespec_symbols): Call find_function_symbols
859 first, and then call lookup_prefix_sym/find_method.
861 2013-03-11 Pedro Alves <palves@redhat.com>
863 * charset.c (convert_between_encodings): Don't cast between
864 different pointer to pointer types. Instead, make the 'inp' local
865 be of the type iconv expects.
866 (wchar_iterate): Don't cast between different pointer to pointer
867 types. Instead, use new pointer local of the type iconv expects.
868 * target.c (target_read_stralloc, target_fileio_read_stralloc):
869 Add new local of type char pointer, and use it to get a
870 char/string view of the byte buffer, instead of casting between
871 pointer to pointer types.
873 2013-03-11 Hafiz Abid Qadeer <abidh@codesourcery.com>
875 * remote.c (remote_set_trace_buffer_size): Move != operator
876 to the start of next line to fix an ARI warning.
878 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
880 * NEWS: Add record changes.
882 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
884 * record-btrace.c (btrace_insn_history): Omit the pc prefix in
885 the instruction history disassembly.
886 * disasm.c (dump_insns): Omit the pc prefix, if requested.
887 * disasm.h (DISASSEMBLY_OMIT_PC): New.
889 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
891 * Makefile.in (SFILES): Add record-btrace.c
892 (COMMON_OBS): Add record-btrace.o
893 * record-btrace.c: New.
894 * objfiles.c: Include btrace.h.
895 (free_objfile): call btrace_free_objfile.
897 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
899 * target.c (target_call_history, target_call_history_from,
900 target_call_history_range): New.
901 * target.h (target_ops) <to_call_history, to_call_history_from,
902 to_call_history_range>: New fields.
903 (target_call_history, target_call_history_from,
904 target_call_history_range): New declaration.
905 * record.c (get_call_history_modifiers, cmd_record_call_history,
906 record_call_history_size): New.
907 (_initialize_record): Add the "record function-call-history" command.
908 Add "set/show record function-call-history-size" commands.
909 * record.h (record_print_flag): New.
911 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
913 * target.h (target_ops) <to_insn_history, to_insn_history_from,
914 to_insn_history_range>: New fields.
915 (target_insn_history): New.
916 (target_insn_history_from): New.
917 (target_insn_history_range): New.
918 * target.c (target_insn_history): New.
919 (target_insn_history_from): New.
920 (target_insn_history_range): New.
921 * record.c: Include cli/cli-utils.h, disasm.h, ctype.h.
922 (record_insn_history_size): New.
923 (get_insn_number): New.
924 (get_context_size): New.
926 (get_insn_history_modifiers): New.
927 (cmd_record_insn_history): New.
928 (_initialize_record): Add "set/show record instruction-history-size"
929 command. Add "record instruction-history" command.
931 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
933 * record.h (record_disconnect): New.
934 (record_detach): New.
935 (record_mourn_inferior): New.
937 * record-full.c (record_disconnect, record_detach,
938 record_mourn_inferior, record_kill): Move to...
942 (record_unpush): New.
943 (cmd_record_stop): Call record_stop. Replace unpush_target
944 call with record_unpush call.
945 (record_disconnect, record_detach): Assert that the target
946 is of record stratum. Call record_unpush, record_stop, and
948 (record_mourn_inferior, record_kill): Assert that the target
949 is of record stratum. Call record_unpush and DEBUG.
951 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
953 * record-full.h, record-full.c (record_memory_query): Rename
955 (record_full_memory_query): ...this. Update all users.
956 (record_arch_list_add_reg): Rename to ...
957 (record_full_arch_list_add_reg): ...this. Update all users.
958 (record_arch_list_add_mem): Rename to ...
959 (record_full_arch_list_add_mem): ...this. Update all users.
960 (record_arch_list_add_end): Rename to ...
961 (record_full_arch_list_add_end): ...this. Update all users.
962 (record_gdb_operation_disable_set): Rename to ...
963 (record_full_gdb_operation_disable_set): ...this.
966 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
968 * record-full.c (DEFAULT_RECORD_INSN_MAX_NUM): Renamed to ...
969 (DEFAULT_RECORD_FULL_INSN_MAX_NUM): ... this. Updated all users.
970 (RECORD_IS_REPLAY): Renamed to ...
971 (RECORD_FULL_IS_REPLAY): ... this. Updated all users.
972 (RECORD_FILE_MAGIC): Renamed to ...
973 (RECORD_FULL_FILE_MAGIC): ... this. Updated all users.
974 (record_mem_entry): Renamed to ...
975 (record_full_mem_entry): ... this. Updated all users.
976 (record_reg_entry): Renamed to ...
977 (record_full_reg_entry): ... this. Updated all users.
978 (record_end_entry): Renamed to ...
979 (record_full_end_entry): ... this. Updated all users.
980 (record_type) <record_end, record_reg, record_mem>: Renamed
982 (record_full_type) <record_full_end, record_full_reg,
983 record_full_mem>: ... this. Updated all users.
984 (record_entry): Renamed to ...
985 (record_full_entry): ... this. Updated all users.
986 (record_core_buf_entry): Renamed to ...
987 (record_full_core_buf_entry): ... this. Updated all users.
988 (record_core_regbuf): Renamed to ...
989 (record_full_core_regbuf): ... this. Updated all users.
990 (record_core_start): Renamed to ...
991 (record_full_core_start): ... this. Updated all users.
992 (record_core_end): Renamed to ...
993 (record_full_core_end): ... this. Updated all users.
994 (record_core_buf_list): Renamed to ...
995 (record_full_core_buf_list): ... this. Updated all users.
996 (record_first): Renamed to ...
997 (record_full_first): ... this. Updated all users.
998 (record_list): Renamed to ...
999 (record_full_list): ... this. Updated all users.
1000 (record_arch_list_head): Renamed to ...
1001 (record_full_arch_list_head): ... this. Updated all users.
1002 (record_arch_list_tail): Renamed to ...
1003 (record_full_arch_list_tail): ... this. Updated all users.
1004 (record_stop_at_limit): Renamed to ...
1005 (record_full_stop_at_limit): ... this. Updated all users.
1006 (record_insn_max_num): Renamed to ...
1007 (record_full_insn_max_num): ... this. Updated all users.
1008 (record_insn_num): Renamed to ...
1009 (record_full_insn_num): ... this. Updated all users.
1010 (record_insn_count): Renamed to ...
1011 (record_full_insn_count): ... this. Updated all users.
1012 (record_ops): Renamed to ...
1013 (record_full_ops): ... this. Updated all users.
1014 (record_core_ops): Renamed to ...
1015 (record_full_core_ops): ... this. Updated all users.
1016 (set_record_cmdlist): Renamed to ...
1017 (set_record_full_cmdlist): ... this. Updated all users.
1018 (show_record_cmdlist): Renamed to ...
1019 (show_record_full_cmdlist): ... this. Updated all users.
1020 (record_cmdlist): Renamed to ...
1021 (record_full_cmdlist): ... this. Updated all users.
1022 (record_beneath_to_resume_ops): Renamed to ...
1023 (record_full_beneath_to_resume_ops): ... this. Updated all users.
1024 (record_beneath_to_resume): Renamed to ...
1025 (record_full_beneath_to_resume): ... this. Updated all users.
1026 (record_beneath_to_wait_ops): Renamed to ...
1027 (record_full_beneath_to_wait_ops): ... this. Updated all users.
1028 (record_beneath_to_wait): Renamed to ...
1029 (record_full_beneath_to_wait): ... this. Updated all users.
1030 (record_beneath_to_store_registers_ops): Renamed to ...
1031 (record_full_beneath_to_store_registers_ops): ... this.
1033 (record_beneath_to_store_registers): Renamed to ...
1034 (record_full_beneath_to_store_registers): ... this.
1036 (record_beneath_to_xfer_partial_ops): Renamed to ...
1037 (record_full_beneath_to_xfer_partial_ops): ... this.
1039 (record_beneath_to_xfer_partial): Renamed to ...
1040 (record_full_beneath_to_xfer_partial): ... this.
1042 (record_beneath_to_insert_breakpoint): Renamed to ...
1043 (record_full_beneath_to_insert_breakpoint): ... this.
1045 (record_beneath_to_stopped_by_watchpoint): Renamed to ...
1046 (record_full_beneath_to_stopped_by_watchpoint): ... this.
1048 (record_beneath_to_stopped_data_address): Renamed to ...
1049 (record_full_beneath_to_stopped_data_address): ... this.
1051 (record_beneath_to_async): Renamed to ...
1052 (record_full_beneath_to_async): ... this. Updated all users.
1053 (record_goto_insn): Renamed to ...
1054 (record_full_goto_insn): ... this. Updated all users.
1055 (record_save): Renamed to ...
1056 (record_full_save): ... this. Updated all users.
1057 (record_reg_alloc): Renamed to ...
1058 (record_full_reg_alloc): ... this. Updated all users.
1059 (record_reg_release): Renamed to ...
1060 (record_full_reg_release): ... this. Updated all users.
1061 (record_mem_alloc): Renamed to ...
1062 (record_full_mem_alloc): ... this. Updated all users.
1063 (record_mem_release): Renamed to ...
1064 (record_full_mem_release): ... this. Updated all users.
1065 (record_end_alloc): Renamed to ...
1066 (record_full_end_alloc): ... this. Updated all users.
1067 (record_end_release): Renamed to ...
1068 (record_full_end_release): ... this. Updated all users.
1069 (record_entry_release): Renamed to ...
1070 (record_full_entry_release): ... this. Updated all users.
1071 (record_list_release): Renamed to ...
1072 (record_full_list_release): ... this. Updated all users.
1073 (record_list_release_following): Renamed to ...
1074 (record_full_list_release_following): ... this.
1076 (record_list_release_first): Renamed to ...
1077 (record_full_list_release_first): ... this. Updated all users.
1078 (record_arch_list_add): Renamed to ...
1079 (record_full_arch_list_add): ... this. Updated all users.
1080 (record_get_loc): Renamed to ...
1081 (record_full_get_loc): ... this. Updated all users.
1082 (record_check_insn_num): Renamed to ...
1083 (record_full_check_insn_num): ... this. Updated all users.
1084 (record_arch_list_cleanups): Renamed to ...
1085 (record_full_arch_list_cleanups): ... this. Updated all users.
1086 (record_message): Renamed to ...
1087 (record_full_message): ... this. Updated all users.
1088 (record_message_wrapper): Renamed to ...
1089 (record_full_message_wrapper): ... this. Updated all users.
1090 (record_message_wrapper_safe): Renamed to ...
1091 (record_full_message_wrapper_safe): ... this. Updated all users.
1092 (record_gdb_operation_disable): Renamed to ...
1093 (record_full_gdb_operation_disable): ... this. Updated all users.
1094 (record_hw_watchpoint): Renamed to ...
1095 (record_full_hw_watchpoint): ... this. Updated all users.
1096 (record_exec_insn): Renamed to ...
1097 (record_full_exec_insn): ... this. Updated all users.
1098 (record_restore): Renamed to ...
1099 (record_full_restore): ... this. Updated all users.
1100 (record_async_inferior_event_token): Renamed to ...
1101 (record_full_async_inferior_event_token): ... this.
1103 (record_async_inferior_event_handler): Renamed to ...
1104 (record_full_async_inferior_event_handler): ... this.
1106 (record_core_open_1): Renamed to ...
1107 (record_full_core_open_1): ... this. Updated all users.
1108 (record_open_1): Renamed to ...
1109 (record_full_open_1): ... this. Updated all users.
1110 (record_open): Renamed to ...
1111 (record_full_open): ... this. Updated all users.
1112 (record_close): Renamed to ...
1113 (record_full_close): ... this. Updated all users.
1114 (record_resume_step): Renamed to ...
1115 (record_full_resume_step): ... this. Updated all users.
1116 (record_resumed): Renamed to ...
1117 (record_full_resumed): ... this. Updated all users.
1118 (record_execution_dir): Renamed to ...
1119 (record_full_execution_dir): ... this. Updated all users.
1120 (record_resume): Renamed to ...
1121 (record_full_resume): ... this. Updated all users.
1122 (record_get_sig): Renamed to ...
1123 (record_full_get_sig): ... this. Updated all users.
1124 (record_sig_handler): Renamed to ...
1125 (record_full_sig_handler): ... this. Updated all users.
1126 (record_wait_cleanups): Renamed to ...
1127 (record_full_wait_cleanups): ... this. Updated all users.
1128 (record_wait_1): Renamed to ...
1129 (record_full_wait_1): ... this. Updated all users.
1130 (record_wait): Renamed to ...
1131 (record_full_wait): ... this. Updated all users.
1132 (record_stopped_by_watchpoint): Renamed to ...
1133 (record_full_stopped_by_watchpoint): ... this. Updated all users.
1134 (record_disconnect): Renamed to ...
1135 (record_full_disconnect): ... this. Updated all users.
1136 (record_detach): Renamed to ...
1137 (record_full_detach): ... this. Updated all users.
1138 (record_mourn_inferior): Renamed to ...
1139 (record_full_mourn_inferior): ... this. Updated all users.
1140 (record_kill): Renamed to ...
1141 (record_full_kill): ... this. Updated all users.
1142 (record_stopped_data_address): Renamed to ...
1143 (record_full_stopped_data_address): ... this. Updated all users.
1144 (record_registers_change): Renamed to ...
1145 (record_full_registers_change): ... this. Updated all users.
1146 (record_store_registers): Renamed to ...
1147 (record_full_store_registers): ... this. Updated all users.
1148 (record_xfer_partial): Renamed to ...
1149 (record_full_xfer_partial): ... this. Updated all users.
1150 (record_breakpoint): Renamed to ...
1151 (record_full_breakpoint): ... this. Updated all users.
1152 (record_breakpoint_p): Renamed to ...
1153 (record_full_breakpoint_p): ... this. Updated all users.
1154 (record_breakpoints): Renamed to ...
1155 (record_full_breakpoints): ... this. Updated all users.
1156 (record_sync_record_breakpoints): Renamed to ...
1157 (record_full_sync_record_breakpoints): ... this.
1159 (record_init_record_breakpoints): Renamed to ...
1160 (record_full_init_record_breakpoints): ... this.
1162 (record_insert_breakpoint): Renamed to ...
1163 (record_full_insert_breakpoint): ... this. Updated all users.
1164 (record_remove_breakpoint): Renamed to ...
1165 (record_full_remove_breakpoint): ... this. Updated all users.
1166 (record_can_execute_reverse): Renamed to ...
1167 (record_full_can_execute_reverse): ... this. Updated all users.
1168 (record_get_bookmark): Renamed to ...
1169 (record_full_get_bookmark): ... this. Updated all users.
1170 (record_goto_bookmark): Renamed to ...
1171 (record_full_goto_bookmark): ... this. Updated all users.
1172 (record_async): Renamed to ...
1173 (record_full_async): ... this. Updated all users.
1174 (record_can_async_p): Renamed to ...
1175 (record_full_can_async_p): ... this. Updated all users.
1176 (record_is_async_p): Renamed to ...
1177 (record_full_is_async_p): ... this. Updated all users.
1178 (record_execution_direction): Renamed to ...
1179 (record_full_execution_direction): ... this. Updated all users.
1180 (record_info): Renamed to ...
1181 (record_full_info): ... this. Updated all users.
1182 (record_delete): Renamed to ...
1183 (record_full_delete): ... this. Updated all users.
1184 (record_is_replaying): Renamed to ...
1185 (record_full_is_replaying): ... this. Updated all users.
1186 (record_goto_entry): Renamed to ...
1187 (record_full_goto_entry): ... this. Updated all users.
1188 (record_goto_begin): Renamed to ...
1189 (record_full_goto_begin): ... this. Updated all users.
1190 (record_goto_end): Renamed to ...
1191 (record_full_goto_end): ... this. Updated all users.
1192 (record_goto): Renamed to ...
1193 (record_full_goto): ... this. Updated all users.
1194 (init_record_ops): Renamed to ...
1195 (init_record_full_ops): ... this. Updated all users.
1196 (record_core_resume): Renamed to ...
1197 (record_full_core_resume): ... this. Updated all users.
1198 (record_core_kill): Renamed to ...
1199 (record_full_core_kill): ... this. Updated all users.
1200 (record_core_fetch_registers): Renamed to ...
1201 (record_full_core_fetch_registers): ... this. Updated all users.
1202 (record_core_prepare_to_store): Renamed to ...
1203 (record_full_core_prepare_to_store): ... this. Updated all users.
1204 (record_core_store_registers): Renamed to ...
1205 (record_full_core_store_registers): ... this. Updated all users.
1206 (record_core_xfer_partial): Renamed to ...
1207 (record_full_core_xfer_partial): ... this. Updated all users.
1208 (record_core_insert_breakpoint): Renamed to ...
1209 (record_full_core_insert_breakpoint): ... this. Updated all users.
1210 (record_core_remove_breakpoint): Renamed to ...
1211 (record_full_core_remove_breakpoint): ... this. Updated all users.
1212 (record_core_has_execution): Renamed to ...
1213 (record_full_core_has_execution): ... this. Updated all users.
1214 (init_record_core_ops): Renamed to ...
1215 (init_record_full_core_ops): ... this. Updated all users.
1216 (cmd_record_restore): Renamed to ...
1217 (cmd_record_full_restore): ... this. Updated all users.
1218 (record_save_cleanups): Renamed to ...
1219 (record_full_save_cleanups): ... this. Updated all users.
1220 (cmd_record_start): Renamed to ...
1221 (cmd_record_full_start): ... this. Updated all users.
1222 (set_record_insn_max_num): Renamed to ...
1223 (set_record_full_insn_max_num): ... this. Updated all users.
1224 (set_record_command): Renamed to ...
1225 (set_record_full_command): ... this. Updated all users.
1226 (show_record_command): Renamed to ...
1227 (show_record_full_command): ... this. Updated all users.
1228 (_initialize_record): Renamed to ...
1229 (_initialize_record_full): ... this. Updated all users.
1231 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1233 * record.h: Split into this and ...
1234 * record-full.h: ... this.
1235 * record.c: Split into this and ...
1236 * record-full.c: ... this.
1237 * target.h (target_ops): Add new fields to_info_record,
1238 to_save_record, to_delete_record, to_record_is_replaying,
1239 to_goto_record_begin, to_goto_record_end, to_goto_record.
1240 (target_info_record): New.
1241 (target_save_record): New.
1242 (target_supports_delete_record): New.
1243 (target_delete_record): New.
1244 (target_record_is_replaying): New.
1245 (target_goto_record_begin): New.
1246 (target_goto_record_end): New.
1247 (target_goto_record): New.
1248 * target.c (target_info_record): New.
1249 (target_save_record): New.
1250 (target_supports_delete_record): New.
1251 (target_delete_record): New.
1252 (target_record_is_replaying): New.
1253 (target_goto_record_begin): New.
1254 (target_goto_record_end): New.
1255 (target_goto_record): New.
1256 * record.h: Declare struct cmd_list_element.
1257 (record_cmdlist): New declaration.
1258 (set_record_cmdlist): New declaration.
1259 (show_record_cmdlist): New declaration.
1260 (info_record_cmdlist): New declaration.
1261 (cmd_record_goto): New declaration.
1262 * record.c: Remove unnecessary includes.
1264 (cmd_record_goto): Remove declaration.
1265 (record_cmdlist): Now extern. Initialize.
1266 (set_record_cmdlist): Now extern. Initialize.
1267 (show_record_cmdlist): Now extern. Initialize.
1268 (info_record_cmdlist): Now extern. Initialize.
1269 (find_record_target): New.
1270 (require_record_target): New.
1271 (cmd_record_start): Update.
1272 (cmd_record_delete): Remove target-specific code.
1273 Call target_delete_record.
1274 (cmd_record_stop): Unpush any record target.
1275 (set_record_insn_max_num): Move to record-full.c
1276 (set_record_command): Add comment.
1277 (show_record_command): Add comment.
1278 (info_record_command): Update comment.
1279 Remove target-specific code.
1280 Call the record target's to_info_record.
1281 (cmd_record_start): New.
1282 (cmd_record_goto): Now extern.
1283 Remove target-specific code.
1284 Call target_goto_begin, target_goto_end, or target_goto.
1285 (_initialize_record): Move record target ops initialization to
1287 Change "record" command help text.
1288 Move "record restore", "record set", and "record show" commands to
1290 * Makefile.in (SFILES): Add record-full.c.
1291 (HFILES_NO_SRCDIR): Add record-full.h.
1292 (COMMON_OBS): Add record-full.o.
1293 * amd64-linux-tdep.c: Include record-full.h instead of record.h.
1294 * arm-tdep.c: Include record-full.h.
1295 * i386-linux-tdep.c: Include record-full.h instead of record.h.
1296 * i386-tdep.c: Include record-full.h.
1297 * infrun.c: Include record-full.h.
1298 * linux-record.c: Include record-full.h.
1299 * moxie-tdep.c: Include record-full.h.
1300 * record-full.c: Include record-full.h.
1301 Change module comment.
1302 (set_record_full_cmdlist): New.
1303 (show_record_full_cmdlist): New.
1304 (record_full_cmdlist): New.
1305 (record_goto_insn): New declaration.
1306 (record_save): New declaration.
1307 (record_check_insn_num): Change query string.
1309 (record_delete): New.
1310 (record_is_replaying): New.
1311 (record_goto_entry): New.
1312 (record_goto_begin): New.
1313 (record_goto_end): New.
1315 (init_record_ops): Update.
1316 (init_record_core_ops): Update.
1317 (cmd_record_save): Rename to record_save. Remove target and arg checks.
1318 (cmd_record_start): New.
1319 (set_record_insn_max_num): Moved from record.c
1320 (set_record_full_command): New.
1321 (show_record_full_command): New.
1322 (_initialize_record_full): New.
1324 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1326 * target.h (add_deprecated_target_alias): New.
1327 * target.c (add_deprecated_target_alias): New.
1329 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1331 * common/linux-btrace.c: Include sys/ptrace, sys/types, sys/wait.h,
1333 (linux_supports_btrace): Add kernel and
1335 (kernel_supports_btrace): New function.
1336 (cpu_supports_btrace): New function.
1337 (intel_supports_btrace): New function.
1339 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1341 * target.h (enum target_object): Add TARGET_OBJECT_BTRACE.
1342 * remote.c: Include btrace.h.
1343 (struct btrace_target_info): New struct.
1344 (remote_supports_btrace): New function.
1345 (send_Qbtrace): New function.
1346 (remote_enable_btrace): New function.
1347 (remote_disable_btrace): New function.
1348 (remote_teardown_btrace): New function.
1349 (remote_read_btrace): New function.
1350 (init_remote_ops): Add btrace ops.
1351 (enum <unnamed>): Add btrace packets.
1352 (struct protocol_feature remote_protocol_features[]): Add btrace packets.
1353 (_initialize_remote): Add packet configuration for branch tracing.
1355 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1357 * features/btrace.dtd: New file.
1358 * Makefile.in (XMLFILES): Add btrace.dtd.
1359 * btrace.h (parse_xml_btrace): New declaration.
1360 * btrace.c: Include xml-support.h.
1361 (parse_xml_btrace): New function.
1362 (parse_xml_btrace_block): New function.
1363 (block_attributes): New struct.
1364 (btrace_attributes): New struct.
1365 (btrace_children): New struct.
1366 (btrace_elements): New struct.
1368 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1370 * amd64-linux-nat.c: Include btrace.h and linux-btrace.h.
1371 (amd64_linux_enable_btrace): New.
1372 (amd64_linux_disable_btrace): New.
1373 (amd64_linux_teardown_btrace): New.
1374 (_initialize_amd64_linux_nat): Initialize btrace ops.
1375 * i386-linux.nat.c: Include btrace.h and linux-btrace.h.
1376 (i386_linux_enable_btrace): New.
1377 (i386_linux_disable_btrace): New.
1378 (i386_linux_teardown_btrace): New.
1379 (_initialize_i386_linux_nat): Initialize btrace ops.
1380 * config/i386/linux.mh: Add linux-btrace.o.
1381 * config/i386/linux64.mh: Add linux-btrace.o.
1383 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1385 * common/linux_btrace.h: New file.
1386 * common/linux_btrace.c: New file.
1387 * Makefile.in (SFILES): Add btrace.c.
1388 (HFILES_NO_SRCDIR): Add common/linux-btrace.h.
1389 (COMMON_OBS): Add btrace.o.
1390 (linux-btrace.o): New rule.
1392 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
1394 * target.h: Include btrace.h.
1395 (struct target_ops) <to_supports_btrace, to_enable_btrace,
1396 to_disable_btrace, to_teardown_btrace, to_read_btrace>: New.
1397 * target.c (target_supports_btrace): New function.
1398 (target_enable_btrace): New function.
1399 (target_disable_btrace): New function.
1400 (target_teardown_btrace): New function.
1401 (target_read_btrace): New function.
1402 * btrace.h: New file.
1403 * btrace.c: New file.
1404 * Makefile.in: Add btrace.c.
1405 * gdbthread.h: Include btrace.h.
1406 (struct thread_info): Add btrace field.
1407 * thread.c: Include btrace.h.
1408 (clear_thread_inferior_resources): Call target_teardown_btrace.
1409 * common/btrace-common.h: New file.
1411 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1413 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Call also kill
1414 for CHILD, ignore PTRACE_KILL errors, move the inner block variable
1415 kill_status to outer block.
1417 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1419 Fix entry-values if the callee called a noreturn function.
1420 * dwarf2-frame-tailcall.c (dwarf2_tailcall_sniffer_first): Use
1421 get_frame_address_in_block. Add new comment.
1423 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1425 Fix entry-values in C++ across CUs.
1426 * dwarf2loc.c (call_site_to_target_addr) <FIELD_LOC_KIND_PHYSNAME>: Use
1427 lookup_minimal_symbol. Add a comment.
1429 (read_call_site_scope) <is_ref_attr> <die_is_declaration>: Prefer
1432 2013-03-08 Yao Qi <yao@codesourcery.com>
1434 * tracepoint.c (_initialize_tracepoint): Indent the code.
1436 2013-03-08 Pedro Alves <palves@redhat.com>
1438 * findcmd.c (put_bits): Change type of parameter to 'gdb_byte *'.
1439 (parse_find_args, find_command): Change type of pattern buffer
1440 locals to 'gdb_byte *'.
1442 2013-03-08 Stan Shebs <stan@codesourcery.com>
1443 Hafiz Abid Qadeer <abidh@codesourcery.com>
1445 * NEWS: Mention set and show trace-buffer-size commands.
1447 * target.h (struct target_ops): New method
1448 to_set_trace_buffer_size.
1449 (target_set_trace_buffer_size): New macro.
1450 * target.c (update_current_target): Set up new method.
1451 * tracepoint.c (trace_buffer_size): New global.
1452 (start_tracing): Send it to the target.
1453 (set_trace_buffer_size): New function.
1454 (_initialize_tracepoint): Add new setshow for trace-buffer-size.
1455 * remote.c (remote_set_trace_buffer_size): New function.
1456 (_initialize_remote): Use it.
1457 (QTBuffer:size) New remote command.
1458 (PACKET_QTBuffer_size): New enum.
1459 (remote_protocol_features): Add an entry for
1460 PACKET_QTBuffer_size.
1462 2013-03-08 Tom Tromey <tromey@redhat.com>
1464 * remote-m32r-sdi.c (m32r_load): Call skip_spaces on correct
1467 2013-03-07 Pedro Alves <palves@redhat.com>
1469 * target.c (target_read_stralloc, target_fileio_read_alloc):
1470 *Cast pointer to 'gdb_byte *' in target call.
1472 2013-03-07 Pedro Alves <palves@redhat.com>
1474 * corefile.c (read_memory_string): Cast pointer to gdb_byte* in
1477 2013-03-07 Keith Seitz <keiths@redhat.com>
1479 * breakpoint.c (catch_syscall_split_args): Use skip_spaces.
1480 (trace_pass_command): Likewise.
1481 * cli/cli-cmds.c: Include cli/cli-utils.h.
1482 (source_command): Use skip-spaces.
1483 (disassemble_command): Likewise.
1484 * findcmd.c: Include cli/cli-utils.h.
1485 (parse_find_args): Use skip_spaces.
1486 * go32-nat.c: Include cli/cli-utils.h.
1487 (go32_sldt): Use skip_spaces.
1488 (go32_sgdt): Likewise.
1489 (go32_sidt): Likewise.
1490 (go32_pde): Likewise.
1491 (go32_pte): Likewise.
1492 (go32_pte_for_address): Likewise.
1493 * infcmd.c: Include cli/cli-utils.h.
1494 (registers_info): Use skip_spaces.
1495 * linux-tdep.c (read_mapping): Use skip_spaces_const.
1496 (linux_info_proc): Likewise.
1497 * linux-thread-db.c: Include cli/cli-utils.h.
1498 (info_auto_load_libthread_db): Use skip_spaces_const.
1499 * m32r-rom.c: Include cli/cli-utils.h.
1500 (m32r_upload_command): Use skip_spaces.
1501 * maint.c: Include cli/cli-utils.h.
1502 (maintenance_translate_address): Use skip_spaces.
1503 * mi/mi-parse.c: Include cli/cli-utils.h.
1504 (mi_parse_argv): Use skip_spaces.
1505 (mi_parse): Likewise.
1506 * minsyms.c: Include cli/cli-utils.h.
1507 (msymbol_hash_iw): Use skip_spaces_const.
1508 * objc-lang.c: Include cli/cli-utils.h.
1509 (parse_selector): Use skip_spaces.
1510 (parse_method): Likewise.
1511 * python/python.c: Include cli/cli-utils.h.
1512 (python_interactive_command)[HAVE_PYTHON]: Use skip_spaces.
1513 (python_command)[HAVE_PYTHON]: Likewise.
1514 (python_interactive_command)[!HAVE_PYTHON]: Likewise.
1515 * remote-m32r-sdi.c: Include cli/cli-utils.h.
1516 (m32r_load): Use skip_spaces.
1517 * serial.c: Include cli/cli-utils.h.
1518 (serial_open): Use skip_spaces_const.
1519 * stack.c: Include cli/cli-utils.h.
1520 (parse_frame_specification_1): Use skip_spaces_const.
1521 * symfile.c: Include cli/cli-utils.h.
1522 (set_ext_lang_command): Use skip_spaces.
1523 * symtab.c: Include cli/cli-utils.h.
1524 (rbreak_command): Use skip_spaces.
1525 * thread.c (thread_name_command): Use skip_spaces.
1526 * tracepoint.c (validate_actionline): Use skip_spaces.
1527 (encode_actions_1): Likewise.
1528 (trace_find_range_command): Likewise.
1529 (trace_find_outside_command): Likewise.
1530 (trace_dump_actions): Likewise.
1532 2013-03-07 Pedro Alves <palves@redhat.com>
1534 * c-lang.c (parse_one_string): Cast argument to gdb_byte *.
1535 * expprint.c (print_subexp_standard): Likewise.
1536 * utils.c (host_char_to_target): Likewise.
1537 * valprint.c (generic_emit_char, generic_printstr): Likewise.
1538 * varobj.c (value_get_print_value): Change type of local to char*.
1539 Cast it gdb_byte * in call to language printer.
1541 2013-03-07 Pedro Alves <palves@redhat.com>
1543 * charset.c (struct wchar_iterator) <input>: Change type to 'const
1545 (make_wchar_iterator): Remove cast to char*.
1546 (wchar_iterate): Change type of local.
1548 2013-03-07 Pedro Alves <palves@redhat.com>
1550 * regcache.c (regcache_xmalloc_1): Call XCALLOC with signed char
1551 for 'regcache->register_status'.
1553 2013-03-07 Pedro Alves <palves@redhat.com>
1555 * breakpoint.c (breakpoint_xfer_memory): Change type of local to
1558 2013-03-07 Pedro Alves <palves@redhat.com>
1560 * stap-probe.c (handle_stap_probe): Add cast to char*.
1562 2013-03-07 Pedro Alves <palves@redhat.com>
1564 * linux-record.c (record_linux_system_call) <gdb_sys_msgrcv,
1565 RECORD_MSGRCV>: Pass a signed variable to
1566 regcache_raw_read_signed, instead of an unsigned one.
1568 2013-03-07 Pedro Alves <palves@redhat.com>
1570 * remote-notif.c (notif_debug): Change type to int.
1571 * remote-notif.h (notif_debug): Likewise.
1573 2013-03-07 Pedro Alves <palves@redhat.com>
1575 * ser-tcp.c (tcp_retry_limit): Change type to unsigned int.
1577 2013-03-07 Pedro Alves <palves@redhat.com>
1579 * remote.c (hex2bin, bin2hex): Move extern declarations to ...
1580 * remote.h (hex2bin, bin2hex): ... here.
1581 * tracepoint.c (hex2bin, bin2hex): Remove extern declarations.
1583 2013-03-07 Eli Zaretskii <eliz@gnu.org>
1585 * utils.c (initialize_utils): Improve doc strings of "set/show
1586 width", "set/show height", and "set/show pagination".
1588 2013-03-06 Keith Seitz <keiths@redhat.com>
1590 * ax-gdb.c (gen_printf): Make FORMAT const.
1591 * ax-gdb.h (gen_printf): Likewise.
1592 * ax-general.c (ax_string): Make STR const.
1593 * ax.h (ax_string): Likewise.
1595 2013-03-06 Doug Evans <dje@google.com>
1597 * elfread.c (elf_symfile_read): Move debugging printf to more
1600 2013-03-06 Pedro Alves <palves@redhat.com>
1602 * python/py-utils.c (target_string_to_unicode): Delete function.
1603 * python/python-internal.h (target_string_to_unicode): Delete
1606 2013-03-06 Pierre Muller <muller@sourceware.org>
1608 * linespec.c (get_current_search_block): ARI fix, use (void)
1609 for empty parameter list.
1611 2013-03-05 Doug Evans <dje@google.com>
1613 * ada-lang.c (ada_lookup_symbol_list_worker): New function, contents
1614 of old ada_lookup_symbol_list. In !full_search case, don't
1616 (ada_lookup_symbol_list): Delete arg full_search, all callers
1617 updated. Call ada_lookup_symbol_list_worker.
1618 (ada_iterate_over_symbols): Call ada_lookup_symbol_list_worker.
1619 * ada-lang.h (ada_lookup_symbol_list): Update.
1620 * language.h (language_defn): Update comment for
1621 la_iterate_over_symbols.
1622 * linespec.c (iterate_over_file_blocks): New function.
1623 (iterate_over_all_matching_symtabs): Call it.
1624 (lookup_prefix_sym): Ditto.
1625 (get_current_search_block): New function.
1626 (get_search_block): Delete.
1627 (find_label_symbols): Call get_current_search_block.
1628 (add_matching_symbols_to_info): Call iterate_over_file_blocks.
1629 * symtab.c (iterate_over_symbols): Don't search superblocks.
1631 2013-03-05 Yao Qi <yao@codesourcery.com>
1633 * cli/cli-decode.c (add_setshow_zuinteger_unlimited_cmd): Change
1634 parameter VAR's type from "unsigned int" to "int".
1635 * command.h (var_zuinteger_unlimited): Update its comments.
1636 (add_setshow_zuinteger_unlimited_cmd): Update the declaration.
1638 2013-03-05 Corinna Vinschen <vinschen@redhat.de>
1640 * NEWS: Mention new target x86_64-*-cygwin*.
1642 2013-03-05 Corinna Vinschen <vinschen@redhat.de>
1644 * configure.host: Add x86_64-*-cygwin* as host.
1645 * configure.tgt: Add x86_64-*-cygwin* as target.
1646 * config/i386/cygwin64.mh: New file.
1648 2013-03-04 Jan Kratochvil <jan.kratochvil@redhat.com>
1650 * linespec.c (decode_line_2): Fix duplicate request off by two message.
1652 2013-03-04 Jan Kratochvil <jan.kratochvil@redhat.com>
1654 * linespec.c (struct linespec_canonical_name): New.
1655 (struct linespec_state): Change canonical_names type to it.
1656 (add_sal_to_sals): Change variable canonical_name to canonical. Change
1657 xrealloc element size. Initialize the different CANONICAL fields.
1658 (canonical_to_fullform): New.
1659 (filter_results): Use it. Add variables canonical, fullform and
1661 (struct decode_line_2_item, decode_line_2_compare_items): New.
1662 (decode_line_2): Remove variables iter and item_names, add variables
1663 items and items_count. Modify the code for these new variables.
1665 2013-03-04 Corinna Vinschen <vinschen@redhat.com>
1667 * coff-pe-read.c (read_pe_exported_syms): Don't return without
1670 2013-03-04 Luis Machado <lgustavo@codesourcery.com>
1672 * tracepoint.c (build_traceframe_info): Add code for byte order.
1674 2013-03-02 Kevin Buettner <kevinb@redhat.com>
1676 * v850-tdep.c: (v850e2_register_name): Revise system register
1677 names to match current V850E2M architecture specifications.
1678 Update register number enum comments too.
1680 2013-03-01 Jiong Wang <jiwang@tilera.com>
1681 Pedro Alves <palves@redhat.com>
1683 * tilegx-tdep.c (tilegx_analyze_prologue): Limit bundle reading
1685 (tilegx_skip_prologue): Limit prologue analysis to section end.
1687 2013-03-01 Jan Kratochvil <jan.kratochvil@redhat.com>
1689 * dwarf2loc.c (call_site_find_chain_1): New variable save_callee_pc,
1692 2013-03-01 Pedro Alves <palves@redhat.com>
1694 Use gdb_byte for bytes from the program being debugged.
1696 * arm-tdep.c (arm_store_return_value, arm_get_longjmp_target):
1697 Change type of local 'buf' to gdb_byte.
1698 * avr-tdep.c (avr_frame_prev_register, avr_push_dummy_call): Likewise.
1699 * bfin-tdep.c (bfin_push_dummy_call): Likewise.
1700 * cris-tdep.c (cris_sigcontext_addr)
1701 (cris_sigtramp_frame_unwind_cache): Likewise.
1702 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp)
1703 (frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
1705 * frv-tdep.c (frv_pseudo_register_write, frv_analyze_prologue): Likewise.
1706 * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer)
1707 (hppa32_hpux_search_dummy_call_sequence)
1708 (hppa_hpux_supply_save_state): Likewise.
1709 * hppa-linux-tdep.c (insns_match_pattern)
1710 (hppa_linux_find_global_pointer): Likewise.
1711 * hppa-tdep.c (hppa_in_function_epilogue_p)
1712 (skip_prologue_hard_way, hppa_frame_cache): Likewise.
1713 * i386-nto-tdep.c (i386nto_sigcontext_addr): Likewise.
1714 * i386fbsd-tdep.c (i386fbsd_supply_uthread)
1715 (i386fbsd_collect_uthread): Likewise.
1716 * ia64-hpux-tdep.c (ia64_hpux_push_dummy_code): Likewise.
1717 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Likewise.
1718 * ia64-tdep.c (examine_prologue, ia64_frame_cache)
1719 (ia64_frame_prev_register, ia64_sigtramp_frame_cache)
1720 (ia64_sigtramp_frame_prev_register, ia64_access_reg)
1721 (ia64_access_rse_reg, ia64_libunwind_frame_this_id)
1722 (ia64_libunwind_frame_prev_register)
1723 (ia64_libunwind_sigtramp_frame_this_id)
1724 (ia64_find_global_pointer_from_dynamic_section)
1725 (find_extant_func_descr, find_func_descr, ia64_dummy_id)
1726 (ia64_unwind_pc): Likewise.
1727 * iq2000-tdep.c (iq2000_store_return_value): Likewise.
1728 * m68hc11-tdep.c (m68hc11_push_dummy_call)
1729 (m68hc11_extract_return_value): Likewise.
1730 * m68klinux-nat.c (fetch_register, store_register): Likewise.
1731 * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_cr32_write)
1732 (mep_get_insn, mep_push_dummy_call): Likewise.
1733 * mips-linux-tdep.c (mips_linux_get_longjmp_target)
1734 (mips_linux_in_dynsym_stub): Likewise.
1735 * mn10300-tdep.c (mep_pseudo_cr32_write): Likewise.
1736 * ppc-linux-nat.c (fetch_register, store_register): Likewise.
1737 * regcache.c (dump_endian_bytes): Change type of parameter 'buf'
1739 * remote-mips.c (mips_set_register): Likewise.
1740 * remote-sim.c (gdbsim_fetch_register): Likewise.
1741 * score-tdep.c (score7_fetch_inst): Change type of parameter
1742 'memblock' and local 'buf' to gdb_byte.
1743 (score7_malloc_and_get_memblock): Change return type to gdb_byte.
1744 Change type of local 'buf' to gdb_byte. Adjust.
1745 (score7_adjust_memblock_ptr): Change type of parameter 'memblock'
1747 (score7_analyze_prologue): Change type of 'memblock' and
1748 'memblock_ptr' locals to gdb_byte*.
1749 * sh64-tdep.c (sh64_extract_return_value)
1750 (sh64_store_return_value): Change type of local 'buf' to gdb_byte.
1751 * solib-darwin.c (darwin_current_sos, darwin_read_exec_load_addr):
1752 * solib-pa64.c (pa64_solib_create_inferior_hook)
1753 (pa64_open_symbol_file_object): Remove local 'buf'.
1754 * solib-som.c (som_solib_create_inferior_hook, link_map_start)
1755 (som_open_symbol_file_object): Likewise.
1756 * solib-spu.c (spu_current_sos): Likewise.
1757 * spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
1758 * spu-multiarch.c (parse_spufs_run, spu_fetch_registers)
1759 (spu_store_registers): Likewise.
1760 * target.c (debug_print_register): Likewise.
1761 * tic6x-tdep.c (tic6x_get_longjmp_target): Likewise.
1762 * xstormy16-tdep.c (xstormy16_store_return_value)
1763 (xstormy16_push_dummy_call, xstormy16_resolve_jmp_table_entry)
1764 (xstormy16_find_jmp_table_entry): Likewise.
1766 2013-03-01 Jiong Wang <jiwang@tilera.com>
1768 * tilegx-tdep.c (tilegx_get_longjmp_target): New function.
1769 (tilegx_gdbarch_init): Install it.
1771 2013-02-28 Tom Tromey <tromey@redhat.com>
1773 * python/py-arch.c (archpy_disassemble): Use PyInt_Check and
1776 2013-02-28 Doug Evans <dje@google.com>
1778 * python/py-finishbreakpoint.c (bpfinishpy_init): gcc -Wall lint.
1779 * python/python.c (gdbpy_find_pc_line): Ditto.
1781 2013-02-28 Tom Tromey <tromey@redhat.com>
1783 * contrib/excheck.py: New file.
1784 * contrib/exsummary.py: New file.
1785 * contrib/gcc-with-excheck: New file.
1787 2013-02-28 Tom Tromey <tromey@redhat.com>
1789 * python/python.c (gdbpy_print_stack): Call begin_line and
1790 fprintf_filtered inside TRY_CATCH.
1792 2013-02-28 Tom Tromey <tromey@redhat.com>
1794 * python/python.c (gdbpy_find_pc_line): Call find_pc_line
1797 2013-02-28 Tom Tromey <tromey@redhat.com>
1799 * py-finishbreakpoint.c (bpfinishpy_init): Reorganize to call
1800 frame_object_to_frame_info inside TRY_CATCH.
1802 2013-02-28 Tom Tromey <tromey@redhat.com>
1804 * py-block.c (gdbpy_block_for_pc): Call block_for_pc inside
1807 2013-02-28 Tom Tromey <tromey@redhat.com>
1809 * objfiles.h (ALL_PSPACE_OBJFILES): Remove trailing backlash.
1811 2013-02-27 Corinna Vinschen <vinschen@redhat.com>
1813 * windows-nat.c: Throughout, fix format strings and casts of
1814 printf-like functions to avoid type related warnings on all
1816 (handle_output_debug_string): Fetch context information address
1817 from debug string using string_to_core_addr.
1819 2013-02-27 Jiong Wang <jiwang@tilera.com>
1821 * regformats/reg-tilegx.dat (name): Change abi name to "tilegx".
1822 * regformats/reg-tilegx32.dat: New.
1824 2013-02-27 Jiong Wang <jiwang@tilera.com>
1826 * configure.tgt (tilegx-*-linux*): Enable gdbserver.
1828 2013-02-27 Jiong Wang <jiwang@tilera.com>
1830 * configure.tgt (tilegx-*-linux*): Replace whitespace with tab.
1832 2013-02-27 Yao Qi <yao@codesourcery.com>
1833 Pedro Alves <palves@redhat.com>
1835 * tracepoint.c (tfile_trace_find): For tfind
1836 pc/tp/range/outside, look for the next trace frame instead of
1837 always starting from frame 0.
1839 2013-02-26 Anthony Green <green@moxielogic.com>
1841 * configure.tgt: Add support for moxie-*-rtems* target.
1843 2013-02-25 Pedro Alves <palves@redhat.com>
1845 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Change
1848 2013-02-24 Maciej W. Rozycki <macro@codesourcery.com>
1850 * mips-tdep.c (mips32_scan_prologue): Reset frame_offset to zero
1851 if $fp is used as the virtual frame pointer.
1853 2013-02-23 Alan Modra <amodra@gmail.com>
1855 * elfread.c (elf_symtab_read): Do not use udata.p here to find
1857 * ppc64-tdep.c (ppc64_elf_make_msymbol_special): New function.
1858 * ppc64-tdep.h (ppc64_elf_make_msymbol_special): Declare.
1859 * ppc-linux-tdep.c (ppc_linux_init_abi): Set up to use the above.
1860 * ppcfbsd-tdep.c (ppcfbsd_init_abi): Likewise.
1862 2013-02-22 Jan Kratochvil <jan.kratochvil@redhat.com>
1865 * elfread.c (build_id_bfd_get): Make the return type const.
1866 (build_id_verify): Make the check parameter const.
1867 (build_id_to_debug_filename): Make the build_id parameter and variable
1869 (find_separate_debug_file_by_buildid): Make the variable build_id const.
1871 2013-02-21 Alan Modra <amodra@gmail.com>
1873 * elfread.c (build_id_bfd_get): Adjust for elf_tdata changes.
1875 2013-02-20 Siva Chandra Reddy <sivachandra@google.com>
1877 Add a new method 'disassemble' to gdb.Architecture class.
1878 * python/py-arch.c (archpy_disassmble): Implementation of the
1879 new method gdb.Architecture.disassemble.
1880 (arch_object_methods): Add entry for the new method.
1882 2013-02-20 Jiong Wang <jiwang@tilera.com>
1884 * MAINTAINERS (Write After Approval): Add myself to the list.
1886 2013-02-19 Pedro Alves <palves@redhat.com>
1888 Garbage collect 'struct monitor_ops'::load_routine.
1890 * monitor.h (struct monitor_ops) <load_routine>: Remove field.
1891 * monitor.c (monitor_load): No longer call
1892 current_monitor->load_routine.
1893 * dbug-rom.c (init_dbug_cmds): Don't set 'load_routine'.
1894 * m32r-rom.c (init_m32r_cmds): Don't set 'load_routine'.
1895 * ppcbug-rom.c (init_ppc_cmds): Don't set 'load_routine'.
1897 2013-02-19 Pedro Alves <palves@redhat.com>
1901 Harmonize with generic_load.
1903 * monitor.c: Include "readline/readline.h".
1904 (monitor_load): Rename parameter 'file' to 'args'. Use build_argv
1905 instead of sscanf. Use CORE_ADDR/strtoulst instead of unsigned
1906 long/strtol for the 'load_offset' local. Error out if no argument
1907 is given or if too many arguments are given. Tilde expand the
1908 passed in file name.
1910 2013-02-19 Kai Tietz <ktietz@redhat.com>
1913 * symfile.c (load_section_data): Change type of load_offset
1915 (generic_load): User strtoulst instead of strtoul for conversion
1918 2013-02-19 Jiong Wang <jiwang@tilera.com>
1920 * tilegx-tdep.c (tilegx_analyze_prologue): add check for
1921 for return address, "lr" register, saved on stack.
1922 * tilegx-tdep.c (tilegx_frame_cache): update "PC" reg
1923 after we invoke tilegx_analyze_prologue.
1925 2013-02-19 Jiong Wang <jiwang@tilera.com>
1927 * tilegx-tdep.c (itilegx_gdbarch_init): char type should be signed.
1929 2013-02-19 Jiong Wang <jiwang@tilera.com>
1931 * tilegx-tdep.c (tilegx_skip_prologue): Use skip_prologue_using_sal.
1933 2013-02-19 Jiong Wang <jiwang@tilera.com>
1935 * tilegx-tdep.c (INT_SWINT_1_SIGRETURN): New macro.
1936 (tilegx_write_pc): New function.
1937 (tilegx_cannot_reference_register): Return zero if REGNO
1938 is TILEGX_FAULTNUM_REGNUM.
1939 (tilegx_gdbarch_init): Add call to set_gdbarch_write_pc.
1940 (tilegx_register_name): Add handling of "faultnum" register.
1941 * tilegx-tdep.h (enum tilegx_regnum): Add TILEGX_FAULTNUM_REGNUM.
1942 * tilegx-linux-tdep.c (tilegx_linux_supply_regset): Add
1943 handling of TILEGX_FAULTNUM_REGNUM.
1944 * tilegx-linux-nat.c (regmap): Add entry for TILEGX_FAULTNUM_REGNUM.
1946 2013-02-19 Jiong Wang <jiwang@tilera.com>
1948 * tilegx-tdep.c (tilegx_push_dummy_call): args pushed on stack
1949 should be aligned to 64bit.
1951 2013-02-19 Kai Tietz <ktietz@redhat.com>
1953 * windows-nat.c (windows_xfer_memory): Fix debug-output
1956 2013-02-19 Lei Liu <lei.liu2@windriver.com>
1958 * mips-linux-nat.c (mips64_linux_regsets_store_registers):
1959 Don't check DSP register number if HAVE_DSP is not set.
1961 2013-02-19 Alan Modra <amodra@gmail.com>
1963 * elfread.c (struct build_id): Delete. Use struct elf_build_id
1964 throughout file instead.
1965 (build_id_bfd_get): Update to use new elf_tdata build_id field.
1966 Don't xmalloc return value.
1967 (build_id_verify): Similarly. Don't xfree.
1968 (build_id_to_debug_filename): Update.
1969 (find_separate_debug_file_by_buildid): Update, don't xfree.
1971 2013-02-18 Tom Tromey <tromey@redhat.com>
1974 * dwarf2read.c (read_subrange_type): Use result of
1977 2013-02-16 Yuanhui Zhang <asmwarrior@gmail.com>
1979 * frame.c: Remove one extra white space after #include
1982 2013-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1984 * contrib/cc-with-tweaks.sh: Extend the comment for -p option.
1986 2013-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1988 * gdb-gdb.gdb.in: Wrap set complaints, b internal_error, b info_command
1989 and dir commands into an if block.
1991 2013-02-15 Sanimir Agovic <sanimir.agovic@intel.com>
1993 * python/py-breakpoint (struct pybp_code): Use int instead of
1996 2013-02-15 Pedro Alves <pedro@codesourcery.com>
1997 Hafiz Abid Qadeer <abidh@codesourcery.com>
1999 * NEWS: Mention new field "trace-file".
2000 * tracepoint.c (trace_status_mi): Output "trace-file" field.
2001 (tfile_open): Record the trace file's filename in the trace
2003 (tfile_files_info): Mention the name of the trace file.
2004 Check the "filename" field explicitely.
2005 (trace_status_command): Explicitely check "filename" field.
2006 (trace_find_command): Ditto.
2007 (trace_find_pc_command): Ditto.
2008 (trace_find_tracepoint_command): Ditto.
2009 (trace_find_line_command): Ditto.
2010 (trace_find_range_command): Ditto.
2011 (trace_find_outside_command): Ditto.
2012 * tracepoint.h (struct trace_status) <from_file>: Rename it
2013 to "filename" and make it hold the trace file's filename
2014 instead of a boolean.
2015 * remote.c (remote_get_trace_status): Initialize "filename"
2016 field with NULL instead of 0.
2018 2013-02-15 Yao Qi <yao@codesourcery.com>
2020 * remote.c: Fix a typo.
2022 2013-02-14 Pierre Muller <muller@sourceware.org>
2024 * contrib/ari/gdb_ari.sh (GNU/Linux rule): Remove.
2026 2013-02-14 Pedro Alves <palves@redhat.com>
2028 * utils.c (savestring): Don't #undef it. Move function to
2029 common/common-utils.c.
2030 * common/common-utils.c: Include gdb_string.h.
2031 (savestring): Move here from utils.c.
2032 * common/common-utils.h (savestring): Declare.
2034 2013-02-14 Pedro Alves <palves@redhat.com>
2036 * utils.c (savestring): Rename parameter 'size' to 'len'.
2038 2013-02-14 Pedro Alves <palves@redhat.com>
2039 Yufeng Zhang <yufeng.zhang@arm.com>
2041 * aarch64-linux-nat.c (aarch64_init_debug_reg_state): Delete.
2042 (aarch64_inferior_data, struct aarch64_inferior_data):
2044 (struct aarch64_process_info): New.
2045 (aarch64_process_list): New global.
2046 (aarch64_find_process_pid, aarch64_add_process)
2047 (aarch64_process_info_get): New functions.
2048 (aarch64_inferior_data_get): Delete.
2049 (aarch64_process_info_get): New function.
2050 (aarch64_forget_process): New function.
2051 (aarch64_get_debug_reg_state): New parameter 'pid'. Reimplement.
2052 (aarch64_linux_prepare_to_resume): Pass the lwp's pid to
2053 aarch64_get_debug_reg_state.
2054 (aarch64_notify_debug_reg_change): Use iterate_over_lwps
2055 instead of linux_nat_iterate_watchpoint_lwps.
2056 (aarch64_linux_new_fork): New function.
2057 (aarch64_linux_child_post_startup_inferior): Use
2058 aarch64_forget_process instead of aarch64_init_debug_reg_state.
2059 (aarch64_handle_breakpoint, aarch64_linux_insert_hw_breakpoint)
2060 (aarch64_linux_remove_hw_breakpoint)
2061 (aarch64_handle_aligned_watchpoint)
2062 (aarch64_handle_unaligned_watchpoint)
2063 (aarch64_linux_insert_watchpoint)
2064 (aarch64_linux_remove_watchpoint)
2065 (aarch64_linux_stopped_data_address): Adjust to pass the current
2066 process id to aarch64_debug_reg_state.
2067 (_initialize_aarch64_linux_nat): Install aarch64_linux_new_fork as
2068 linux_nat_new_fork hook, and aarch64_forget_process as
2069 linux_nat_forget_process hook; remove the call to
2070 register_inferior_data_with_cleanup.
2072 2013-02-14 Pedro Alves <palves@redhat.com>
2074 * eval.c (evaluate_subexp_for_address) <default_case_after_eval,
2075 EVAL_AVOID_SIDE_EFFECTS>: Swap and handle TYPE_CODE_REF before
2078 2013-02-14 Pedro Alves <pedro@codesourcery.com>
2079 Hafiz Abid Qadeer <abidh@codesourcery.com>
2081 * tracepoint.h (validate_trace_state_variable_name): Declare.
2082 * tracepoint.c (validate_trace_state_variable_name): New.
2083 (trace_variable_command): Parse the trace state variable's name
2084 without using parse_expression. Do several validations.
2085 * mi/mi-main.c (mi_cmd_trace_define_variable): Don't parse the
2086 trace state variable's name with parse_expression. Validate it.
2088 2013-02-14 Yao Qi <yao@codesourcery.com>
2090 * infcmd.c (breakpoint_proceeded): Remove it.
2092 2013-02-14 Yao Qi <yao@codesourcery.com>
2094 * tracepoint.c (end_actions_pseudocommand): Make it static.
2095 (while_stepping_pseudocommand): Likewise.
2096 * tracepoint.h (end_actions_pseudocommand): Remove the
2098 (while_stepping_pseudocommand): Likewise.
2100 2013-02-14 Yao Qi <yao@codesourcery.com>
2102 * cli/cli-decode.c (help_cmd): Remove the declaration of
2104 (help_all): Likewise.
2106 2013-02-13 Pedro Alves <palves@redhat.com>
2108 * amd64-linux-nat.c (update_debug_registers_callback):
2110 (amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use
2112 (amd64_linux_prepare_to_resume): Pass the lwp's pid to
2113 i386_debug_reg_state.
2114 (amd64_linux_new_fork): New function.
2115 (_initialize_amd64_linux_nat): Install amd64_linux_new_fork as
2116 linux_nat_new_fork hook, and i386_forget_process as
2117 linux_nat_forget_process hook.
2118 * i386-linux-nat.c (update_debug_registers_callback):
2120 (i386_linux_dr_set_control, i386_linux_dr_set_addr): Use
2122 (i386_linux_prepare_to_resume): Pass the lwp's pid to
2123 i386_debug_reg_state.
2124 (i386_linux_new_fork): New function.
2125 (_initialize_i386_linux_nat): Install i386_linux_new_fork as
2126 linux_nat_new_fork hook, and i386_forget_process as
2127 linux_nat_forget_process hook.
2128 * i386-nat.c (i386_init_dregs): Delete.
2129 (i386_inferior_data, struct i386_inferior_data):
2131 (struct i386_process_info): New.
2132 (i386_process_list): New global.
2133 (i386_find_process_pid, i386_add_process, i386_process_info_get):
2135 (i386_inferior_data_get): Delete.
2136 (i386_process_info_get): New function.
2137 (i386_debug_reg_state): New parameter 'pid'. Reimplement.
2138 (i386_forget_process): New function.
2139 (i386_cleanup_dregs): Rewrite.
2140 (i386_update_inferior_debug_regs, i386_insert_watchpoint)
2141 (i386_remove_watchpoint, i386_region_ok_for_watchpoint)
2142 (i386_stopped_data_address, i386_insert_hw_breakpoint)
2143 (i386_remove_hw_breakpoint): Adjust to pass the current process id
2144 to i386_debug_reg_state.
2145 (i386_use_watchpoints): Don't register inferior data.
2146 * i386-nat.h (i386_debug_reg_state): Add new 'pid' parameter, and
2148 (i386_forget_process): Declare.
2149 * linux-fork.c (delete_fork): Call linux_nat_forget_process.
2150 * linux-nat.c (linux_nat_new_fork, linux_nat_forget_process_hook):
2152 (linux_child_follow_fork): Don't call linux_nat_new_thread here.
2153 (add_initial_lwp): New, factored out from ...
2154 (add_lwp): ... this. Don't check the number of lwps before
2155 calling linux_nat_new_thread.
2156 (linux_nat_iterate_watchpoint_lwps): Delete.
2157 (linux_nat_attach): Use add_initial_lwp instead of add_lwp.
2158 (linux_handle_extended_wait): Call the linux_nat_new_fork hook on
2160 (linux_nat_wait_1): Use add_initial_lwp instead of add_lwp for the
2162 (linux_nat_kill, linux_nat_mourn_inferior): Call
2163 linux_nat_forget_process.
2164 (linux_nat_set_new_fork, linux_nat_set_forget_process)
2165 (linux_nat_forget_process): New functions.
2166 * linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): Delete
2168 (linux_nat_iterate_watchpoint_lwps): Delete declaration.
2169 (linux_nat_new_fork_ftype, linux_nat_forget_process_ftype): New
2171 (linux_nat_set_new_fork, linux_nat_set_forget_process)
2172 (linux_nat_forget_process): New declarations.
2174 * amd64fbsd-nat.c (super_mourn_inferior): New global.
2175 (amd64fbsd_mourn_inferior): New function.
2176 (_initialize_amd64fbsd_nat): Override to_mourn_inferior.
2177 * windows-nat.c (windows_detach): Call i386_cleanup_dregs.
2179 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
2181 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity):
2184 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
2186 * aarch64-linux-nat.c (debug_reg_change_callback)
2187 (aarch64_linux_get_debug_reg_capacity): ARI fix: Replace %llx with
2190 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
2192 * aarch64-linux-nat.c (dr_changed_t): ARI fix: Replace long long
2195 2013-02-13 Pedro Alves <palves@redhat.com>
2196 Hafiz Abid Qadeer <abidh@codesourcery.com>
2198 * c-lang.c (c_op_print_tab): Add entry for UNOP_PLUS.
2200 2013-02-12 Tom Tromey <tromey@redhat.com>
2203 * c-exp.y (lex_one_token): Initialize other fields of yylval on
2205 (classify_inner_name): Remove 'first_name' argument, add
2206 'context'. Remove unused variable.
2207 (yylex): Explicitly maintain the context type. Exit loop earlier
2208 if NAME result is seen.
2210 2013-02-12 Pedro Alves <palves@redhat.com>
2212 * amd64-darwin-tdep.c: Add (C) after Copyright.
2213 * cli/cli-cmds.h: Ditto.
2214 * cli/cli-decode.c: Ditto.
2215 * cli/cli-decode.h: Ditto.
2216 * cli/cli-dump.c: Ditto.
2217 * cli/cli-dump.h: Ditto.
2218 * cli/cli-interp.c: Ditto.
2219 * cli/cli-logging.c: Ditto.
2220 * cli/cli-script.c: Ditto.
2221 * cli/cli-script.h: Ditto.
2222 * cli/cli-setshow.c: Ditto.
2223 * cli/cli-setshow.h: Ditto.
2224 * cli/cli-utils.c: Ditto.
2225 * cli/cli-utils.h: Ditto.
2226 * config/alpha/nm-osf3.h: Ditto.
2227 * config/djgpp/djconfig.sh: Ditto.
2228 * config/i386/nm-fbsd.h: Ditto.
2229 * config/i386/nm-i386gnu.h: Ditto.
2230 * config/nm-linux.h: Ditto.
2231 * config/nm-nto.h: Ditto.
2232 * config/rs6000/nm-rs6000.h: Ditto.
2233 * config/sparc/nm-sol2.h: Ditto.
2234 * darwin-nat-info.c: Ditto.
2237 * gdb-demangle.h: Ditto.
2238 * i386-darwin-nat.c: Ditto.
2239 * i386-darwin-tdep.c: Ditto.
2240 * linux-fork.h: Ditto.
2241 * m32c-tdep.c: Ditto.
2242 * microblaze-linux-tdep.c: Ditto.
2243 * microblaze-rom.c: Ditto.
2244 * microblaze-tdep.c: Ditto.
2245 * microblaze-tdep.h: Ditto.
2246 * mips-linux-tdep.h: Ditto.
2247 * ppc-ravenscar-thread.c: Ditto.
2248 * ppc-ravenscar-thread.h: Ditto.
2249 * prologue-value.c: Ditto.
2250 * prologue-value.h: Ditto.
2251 * ravenscar-thread.c: Ditto.
2252 * ravenscar-thread.h: Ditto.
2253 * sparc-ravenscar-thread.c: Ditto.
2254 * sparc-ravenscar-thread.h: Ditto.
2255 * tilegx-linux-tdep.c: Ditto.
2256 * unwind_stop_reasons.def: Ditto.
2257 * windows-nat.h: Ditto.
2258 * xtensa-linux-tdep.c: Ditto.
2259 * xtensa-xtregs.c: Ditto.
2260 * regformats/regdat.sh: Ditto.
2261 * regformats/regdef.h: Ditto.
2263 2013-02-12 Pedro Alves <palves@redhat.com>
2265 * break-catch-sig.c: Update copyright years.
2267 2013-02-11 Siva Chandra Reddy <sivachandra@google.com>
2269 Add support for a destructor for ui_out data and use it to
2270 provide a ui_out destructor.
2271 * ui-out.h: Declare the new ui_out destructor.
2272 (ui_out_impl): Add a field for data destructor in ui_out_impl.
2273 * ui-out.c (default_data_destroy): Add a default data destructor
2275 (default_ui_out_impl): Set the new data_destroy field to
2276 default_data_destroy
2277 (uo_data_destroy): Local function which invokes the data
2278 destructor if present.
2279 (clear_table): Local function which clears the table data of a
2281 (ui_out_destroy): Public function which frees a ui_out object.
2282 (ui_out_table_end): Use the new clear_table function.
2283 * cli-out.c (cli_ui_out_impl): Set the new data_destroy field to
2285 * mi/mi-out.c (mi_ui_out_impl): Set the new data_destroy field
2288 2013-02-11 Doug Evans <dje@google.com>
2290 * printcmd.c (printf_c_string,printf_wide_c_string): New functions.
2291 (printf_decfloat): New function. Broken out from ui_printf.
2292 Remove unnecessary code to shift the entire format string down.
2293 (printf_pointer): New function.
2294 (ui_printf): Code to print C strings, wide C strings, decfloats,
2295 and pointers moved to separate functions.
2297 2013-02-11 Sergio Durigan Junior <sergiodj@redhat.com>
2299 * valops.c (value_assign): Handling bitfield offset in
2300 `lval_internalvar_component' case.
2302 2013-02-08 Doug Evans <dje@google.com>
2304 * common/format.c (parse_format_string): Fix whitespace.
2306 2013-02-08 Matthew Gretton-Dann <matthew.gretton-dann@linaro.org>
2308 * stack.c (return_command): Work around uninitialized variable
2311 2013-02-08 Yufeng Zhang <yufeng.zhang@arm.com>
2313 * aarch64-linux-tdep.c (AARCH64_LINUX_SIZEOF_GREGSET): Change the
2314 number of the registers from 36 to 34.
2316 2013-02-08 Marcus Shawcroft <marcus.shawcroft@arm.com>
2318 * NEWS: Mention new AArch64 native and target support.
2320 2013-02-08 Marcus Shawcroft <marcus.shawcroft@arm.com>
2322 * MAINTAINERS (Write After Approval): Add myself.
2324 2013-02-08 Jim MacArthur <jim.macarthur@arm.com>
2325 Marcus Shawcroft <marcus.shawcroft@arm.com>
2326 Nigel Stephens <nigel.stephens@arm.com>
2327 Yufeng Zhang <yufeng.zhang@arm.com>
2329 * aarch64-linux-nat.c: New file.
2330 * config/aarch64/linux.mh: New file.
2331 * configure.host: Add AArch64.
2332 * Makefile.in (ALLDEPFILES): Add aarch64-linux-nat.c.
2334 2013-02-07 Doug Evans <dje@google.com>
2336 * cli/cli-cmds.c (_initialize_cli_cmds): Clarify argument to
2337 disassemble command.
2339 2013-02-07 Marcus Shawcroft <marcus.shawcroft@arm.com>
2341 * aarch64-linux-tdep.c (aarch64_linux_init_abi): Call
2342 set_gdbarch_fetch_tls_load_module_address.
2344 2013-02-06 David S. Miller <davem@davemloft.net>
2346 * sparc-tdep.c (sparc32_return_value): Handle writing return value when
2347 using RETURN_VALUE_ABI_PRESERVES_ADDRESS.
2348 * value.c (struct_return_convention): New function.
2349 (using_struct_return): Implement in terms of struct_return_convention.
2350 * value.h (struct_return_convention): Declare.
2351 * stack.c (return_command): Allow successful overriding of the return
2352 value when RETURN_VALUE_ABI_PRESERVES_ADDRESS.
2354 2013-02-06 Tom Tromey <tromey@redhat.com>
2356 * python/py-type.c (typy_strip_typedefs): Don't call check_typedef
2357 outside of TRY_CATCH.
2359 2013-02-06 Yao Qi <yao@codesourcery.com>
2361 * mi/mi-interp.c: Include "tracepoint.h".
2362 (mi_tsv_modified): Declare.
2363 (mi_tsv_created, mi_tsv_deleted): Update declaration.
2364 (mi_interpreter_init): Call observer_attach_tsv_modified.
2365 (mi_tsv_modified): New.
2366 (mi_tsv_created, mi_tsv_deleted): Update.
2367 * tracepoint.c (trace_variable_command): Call
2368 observer_notify_tsv_modified if the initial value of tsv is
2370 (delete_trace_state_variable): Call
2371 observer_notify_tsv_deleted earlier.
2372 (trace_variable_command): Caller update.
2373 (create_tsv_from_upload): Likewise.
2374 * observer.sh: Declare "struct trace_state_variable".
2376 * NEWS: Mention the new MI notification "=tsv-modified".
2378 2013-02-05 Doug Evans <dje@google.com>
2380 * completer.c (location_completer): Fix typo in comment.
2382 2013-02-05 Jan Kratochvil <jan.kratochvil@redhat.com>
2384 * breakpoint.c (add_location_to_breakpoint): Insert the location with
2387 2013-02-05 Marcus Shawcroft <marcus.shawcroft@arm.com>
2389 * aarch64-tdep.c (aarch64_analyze_prologue): ARI fix:
2390 Refactor if statement to avoid trailing || operator.
2392 2013-02-05 Andreas Tobler <andreast@fgznet.ch>
2394 * NEWS: Add PowerPC FreeBSD as a new native configuration.
2396 2013-02-04 Andreas Tobler <andreast@fgznet.ch>
2398 * Makefile.in (ALL_TARGET_OBS): Add powerpc FreeBSD files.
2399 * configure.host: Add powerpc*-*-freebsd* target.
2400 * configure.tgt: Add target info for powerpc*-*-freebsd*.
2401 * ppcfbsd-nat.c, ppcfbsd-tdep.h, ppcfbsd-tdep.c: New files.
2402 * config/powerpc/fbsd.mh: New file.
2404 2013-02-04 Sergio Durigan Junior <sergiodj@redhat.com>
2405 Denys Vlasenko <dvlasenk@redhat.com>
2406 Pedro Alves <palves@redhat.com>
2408 * gdbarch.sh (elfcore_write_linux_prpsinfo): New F hook.
2409 (struct elf_internal_linux_prpsinfo): Forward declare.
2410 * gdbarch.h, gdbarch.c: Regenerate.
2411 * linux-tdep.c: Include `cli/cli-utils.h'.
2412 (linux_fill_prpsinfo): New function.
2413 (linux_make_corefile_notes): Use linux_fill_prpsinfo. If there's
2414 an elfcore_write_linux_prpsinfo hook, use it, otherwise, use
2415 elfcore_write_linux_prpsinfo32 or elfcore_write_linux_prpsinfo64
2416 depending on gdbarch pointer bitness.
2417 * ppc-linux-tdep.c: Include elf-bfd.h.
2418 (ppc_linux_init_abi): Hook in elfcore_write_ppc_linux_prpsinfo32
2421 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2422 Marcus Shawcroft <marcus.shawcroft@arm.com>
2423 Nigel Stephens <nigel.stephens@arm.com>
2424 Yufeng Zhang <yufeng.zhang@arm.com>
2426 * configure.tgt (aarch64*-*-linux*): Set build_gdbserver=yes.
2428 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2429 Marcus Shawcroft <marcus.shawcroft@arm.com>
2430 Nigel Stephens <nigel.stephens@arm.com>
2431 Yufeng Zhang <yufeng.zhang@arm.com>
2433 * aarch64-newlib-tdep.c: New file.
2434 * configure.tgt: Add aarch64-newlib-tdep.o to gdb_target_obs of
2436 * defs.h (enum gdb_osabi): Add GDB_OSABI_NEWLIB.
2437 * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-newlib-tdep.o.
2438 (ALLDEPFILES): Add aarch64-newlib-tdep.c.
2439 * osabi.c (gdb_osabi_names): Add "Newlib".
2441 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2442 Marcus Shawcroft <marcus.shawcroft@arm.com>
2443 Nigel Stephens <nigel.stephens@arm.com>
2444 Yufeng Zhang <yufeng.zhang@arm.com>
2446 * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-linux-tdep.o.
2447 (ALLDEPFILES): Add aarch64-linux-tdep.c.
2448 * aarch64-linux-tdep.c: New file.
2449 * aarch64-linux-tdep.h: New file.
2450 * aarch64-tdep.h (gdbarch_tdep): Define gregset and fpregset.
2451 * configure.tgt: Add aarch64-none-linux-gnu.
2453 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
2454 Marcus Shawcroft <marcus.shawcroft@arm.com>
2455 Nigel Stephens <nigel.stephens@arm.com>
2456 Yufeng Zhang <yufeng.zhang@arm.com>
2458 * Makefile.in (ALL_64_TARGET_OBS): Add arch64-tdep.o.
2459 (HFILES_NO_SRCDIR): Add aarch64-tdep.h.
2460 (ALLDEPFILES): Add aarch64-tdep.c.
2461 * aarch64-tdep.c: New file.
2462 * aarch64-tdep.h: New file.
2463 * configure.tgt: Add AArch64.
2464 * features/Makefile (WHICH): Add aarch64 and aarch64-without-fpu.
2465 (aarch64-expedite): New definition.
2466 * features/aarch64-core.xml: New file.
2467 * features/aarch64-fpu.xml: New file.
2468 * features/aarch64-without-fpu.c: New file (generated).
2469 * features/aarch64-without-fpu.xml: New file.
2470 * features/aarch64.c: New file (generated).
2471 * features/aarch64.xml: New file.
2472 * regformats/aarch64-without-fpu.dat: New file (generated).
2473 * regformats/aarch64.dat: New file (generated).
2475 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2477 * contrib/expect-read1.c: New file.
2478 * contrib/expect-read1.sh: New file.
2480 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2482 * dwarf2read.c (file_file_name): New function with code from
2484 (file_full_name): Move most of the code to file_file_name.
2485 (macro_start_file): Rename variable full_name to file_name and use
2486 file_file_name for it. Add comp_dir parameter to new_macro_table.
2487 * macrocmd.c (show_pp_source_pos): New variable fullname. Replace any
2488 macro_source_file->filename access by macro_source_fullname call.
2489 * macroscope.c (_initialize_macroscope): Update the new_macro_table
2491 * macrotab.c (struct macro_table): New field comp_dir.
2492 (macro_include): New variables link_fullname and source_fullname.
2493 Replace any macro_source_file->filename access by macro_source_fullname
2495 (macro_lookup_inclusion): Remove the partial filenames checking code.
2496 (check_for_redefinition): New variables source_fullname and
2497 found_key_fullname. Replace any macro_source_file->filename access by
2498 macro_source_fullname call.
2499 (macro_undef): New variables source_fullname and key_fullname. Replace
2500 any macro_source_file->filename access by macro_source_fullname call.
2501 (macro_lookup_definition): New variables retval and source_fullname.
2502 Replace any macro_source_file->filename access by macro_source_fullname
2504 (foreach_macro): New variable key_fullname. Replace any
2505 macro_source_file->filename access by macro_source_fullname call.
2506 (foreach_macro_in_scope): New variable datum_fullname. Replace any
2507 macro_source_file->filename access by macro_source_fullname call.
2508 (new_macro_table): Add parameter comp_dir. Initialize T with it.
2509 (macro_source_fullname): New function.
2510 * macrotab.h (struct macro_source_file): Extent the filename field
2512 (new_macro_table): New parameter comp_dir, add a comment for it.
2513 (macro_source_fullname): new declaration.
2515 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2517 * dwarf2read.c (dw2_map_symtabs_matching_filename): Move variable
2518 this_real_name to outer block. Use it also for
2519 compare_filenames_for_search.
2520 (dw2_expand_symtabs_matching): New variable this_real_name. Use it
2521 with dw2_get_real_path for file_matcher, considering also
2522 BASENAMES_MAY_DIFFER.
2523 (file_full_name): Prepend COMP_DIR even for relative lh->INCLUDE_DIRS.
2525 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2527 * dwarf2read.c (dw2_expand_symtabs_matching): Add basenames parameter
2528 to the file_matcher parameter. Pass 0 to it.
2529 (dwarf2_create_include_psymtab): Copy also DIRNAME.
2530 * psymtab.c (partial_map_symtabs_matching_filename): Drop handling of
2531 NULL psymtab_to_fullname result.
2532 (psymtab_to_fullname): Remove variable r. Never return NULL, assemble
2533 an expected filename instead.
2534 (expand_symtabs_matching_via_partial): Add basenames parameter to the
2535 file_matcher parameter. Call also psymtab_to_fullname, after newly
2536 considering BASENAMES_MAY_DIFFER.
2537 * source.c (rewrite_source_path): Remove static.
2538 * source.h (rewrite_source_path): New declaration.
2539 * symfile.h (struct quick_symbol_functions): Add basenames parameter to
2540 the expand_symtabs_matching field. Comment it.
2541 * symtab.c (file_matches): New function comment. Add parameter
2542 basenames, implement it.
2543 (search_symbols_file_matches): Add basenames parameter. Update the
2544 file_matches caller.
2545 (search_symbols): Match FILES also against symtab_to_fullname.
2546 Optimize it for BASENAMES_MAY_DIFFER.
2548 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2550 * source.c (print_source_lines_base): Print for TUI also "fullname".
2551 * tui/tui-data.c (init_content_element): Change tui_locator_element
2553 * tui/tui-data.h (struct tui_locator_element): Likewise.
2554 * tui/tui-disasm.c (tui_show_disassem_and_update_source): Rename
2555 tui_update_locator_filename calls to tui_update_locator_fullname.
2556 Replace symtab->filename refererence by symtab_to_fullname call.
2557 * tui/tui-out.c (tui_field_string): Check for "fullname" now.
2558 * tui/tui-source.c (tui_set_source_content): Change tui_locator_element
2559 field to full_name. Replace symtab->filename refererence by
2560 symtab_to_fullname call.
2561 (tui_show_symtab_source): Rename parameter to fullname. Change
2562 tui_locator_element field to full_name.
2563 * tui/tui-stack.c: Include source.h.
2564 (tui_set_locator_filename): Rename the declaration to ...
2565 (tui_set_locator_fullname): ... here. Rename its parameter to
2566 fullname, updates its comment.
2567 (tui_set_locator_info): Rename its parameter to fullname.
2568 (tui_set_locator_filename): Rename the definition to ...
2569 (tui_set_locator_fullname): ... here. Rename its parameter to
2570 fullname, updates its comment. Change tui_locator_element field to
2572 (tui_set_locator_info): Rename its parameter to fullname.
2573 (tui_set_locator_info): Rename callee to tui_set_locator_fullname.
2574 (tui_update_locator_filename): Rename to ...
2575 (tui_update_locator_fullname): ... here. Rename callee to
2576 tui_set_locator_fullname.
2577 (tui_show_frame_info): Replace symtab->filename refererence by
2578 symtab_to_fullname call.
2579 * tui/tui-stack.h (tui_update_locator_filename): Rename to ...
2580 (tui_update_locator_fullname): ... here.
2581 * tui/tui-winsource.c (tui_display_main): Rename the callee to
2582 tui_update_locator_fullname. Replace symtab->filename refererence by
2583 symtab_to_fullname call.
2584 * tui/tui.c (tui_show_source): Rename its parameter to fullname.
2585 Rename the callee to tui_update_locator_fullname.
2586 * tui/tui.h (tui_show_source): Rename its parameter to fullname.
2588 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2590 * ada-lang.c (user_select_syms): Replace symtab->filename refererences
2591 by symtab_to_filename_for_display calls.
2592 * breakpoint.c (print_breakpoint_location, resolve_sal_pc): Likewise.
2593 (clear_command): New variable sal_fullname, initialize it. Replace
2594 compare_filenames_for_search by filename_cmp with sal_fullname.
2595 (say_where, update_static_tracepoint): Replace symtab->filename
2596 refererences by symtab_to_filename_for_display calls.
2597 * cli/cli-cmds.c (edit_command, list_command, ambiguous_line_spec):
2599 * dwarf2read.c: Include source.h.
2600 (fixup_go_packaging): Replace symtab->filename refererences by
2601 symtab_to_filename_for_display calls.
2602 * linespec.c (add_sal_to_sals): Rename variable filename to fullname.
2603 Replace symtab->filename refererences by symtab_to_filename_for_display
2605 (create_sals_line_offset, convert_linespec_to_sals): New variable
2606 fullname, initialize it, replace symtab->filename reference by the
2608 * linux-fork.c: Include source.h.
2609 (info_checkpoints_command): Replace symtab->filename refererences by
2610 symtab_to_filename_for_display calls.
2611 * macroscope.c (sal_macro_scope): Replace symtab->filename refererences
2612 by symtab_to_filename_for_display calls.
2613 * mdebugread.c: Include source.h.
2614 (psymtab_to_symtab_1): Replace symtab->filename refererences by
2615 symtab_to_filename_for_display calls.
2616 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
2617 (mi_cmd_file_list_exec_source_files): Likewise.
2618 * printcmd.c: Include source.h.
2619 (build_address_symbolic): Replace symtab->filename refererences by
2620 symtab_to_filename_for_display calls.
2621 * psymtab.c (partial_map_symtabs_matching_filename)
2622 (read_psymtabs_with_fullname): Call compare_filenames_for_search also
2623 with psymtab_to_fullname.
2624 * python/py-symtab.c (stpy_str): Replace symtab->filename refererences
2625 by symtab_to_filename_for_display calls.
2626 (stpy_get_filename): New variable filename, initialize it, use instead
2627 of symtab->filename refererences.
2628 (salpy_str): Make variable filename const char *. Replace
2629 symtab->filename refererences by symtab_to_filename_for_display calls.
2630 * skip.c: Include source.h and filenames.h.
2631 (skip_file_command): Remove const from the symtab variable. Replace
2632 symtab->filename refererences by symtab_to_fullname call.
2633 (function_name_is_marked_for_skip): New variables searched_for_fullname
2634 and fullname. Use them to search also with symtab's fullname.
2635 * source.c (find_source_lines): Replace symtab->filename refererences
2636 by symtab_to_filename_for_display calls.
2637 (print_source_lines_base): New variable filename, use it instead of
2638 symtab->filename. Replace symtab->filename refererences by
2639 symtab_to_filename_for_display calls.
2640 (line_info, forward_search_command): Replace symtab->filename
2641 refererences by symtab_to_filename_for_display calls.
2642 (reverse_search_command): Replace symtab->filename refererences by
2643 symtab_to_filename_for_display calls. New variable filename for it.
2644 * stack.c (frame_info): Likewise.
2645 * symmisc.c: Include source.h.
2646 (dump_objfile, dump_symtab_1, maintenance_print_symbols)
2647 (maintenance_info_symtabs): Replace symtab->filename refererences by
2648 symtab_to_filename_for_display calls.
2649 * symtab.c (iterate_over_some_symtabs): Call
2650 compare_filenames_for_search also with symtab_to_fullname.
2651 (lookup_symbol_aux_quick, basic_lookup_transparent_type_quick): Replace
2652 symtab->filename refererences by symtab_to_filename_for_display calls.
2653 (find_line_symtab): Replace symtab->filename refererences by
2654 symtab_to_filename_for_display calls.
2655 (file_matches): Replace filename_cmp by compare_filenames_for_search.
2656 (print_symbol_info): Make the last parameter const char *. New
2657 variable s_filename. Use it in the function.
2658 (symtab_symbol_info): Make the last_filename variable const char *.
2659 Replace symtab->filename refererences by symtab_to_filename_for_display
2661 (rbreak_command): New variable fullname. Use it. Replace
2662 symtab->filename refererence by symtab_to_filename_for_display call.
2663 * tracepoint.c (set_traceframe_context, trace_find_line_command)
2664 (print_one_static_tracepoint_marker): Replace symtab->filename
2665 refererences by symtab_to_filename_for_display calls.
2666 * tui/tui-source.c (tui_set_source_content): New variables filename and
2667 s_filename. Replace symtab->filename refererences by this variable.
2668 Replace other symtab->filename refererences by
2669 symtab_to_filename_for_display calls.
2671 2013-02-03 Eldar Gaynetdinov <hal9000ed2k@gmail.com>
2672 Jan Kratochvil <jan.kratochvil@redhat.com>
2674 Add a new variable that controls a way in which filenames are
2676 * NEWS (set filename-display): New entry.
2677 * source.c (filename_display_basename, filename_display_relative)
2678 (filename_display_absolute, filename_display_kind_names)
2679 (filename_display_string, show_filename_display_string)
2680 (symtab_to_filename_for_display): New.
2681 (_initialize_source): Added initialization of 'filename-display'
2683 * source.h (symtab_to_filename_for_display): Added declaration.
2684 * stack.c (print_frame): Added new variable and calling of a new
2685 function and condition with this variable. Changed third argument of
2686 calling of a function.
2688 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2690 * tui/tui-data.c (init_win_info, tui_del_window, tui_free_window):
2691 Rename field reference filename to fullname.
2692 * tui/tui-data.h (struct tui_source_info): Rename field filename to
2693 fullname. New comment for it.
2694 * tui/tui-source.c (tui_set_source_content): Rename field reference
2695 filename to fullname. Initialize field by symtab_to_fullname now.
2696 * tui/tui-winsource.c (tui_update_breakpoint_info): Rename field
2697 reference filename to fullname. Use symtab_to_fullname during
2700 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2703 * dwarf2read.c (dw2_expand_symtabs_with_filename): Rename to ...
2704 (dw2_expand_symtabs_with_fullname): ... here. Rename parameter
2705 filename to fullname. Rename variable this_name to this_fullname.
2706 Lowercase FILENAME_CMP call.
2707 (dw2_find_symbol_file): New comment for the returned string.
2708 (dwarf2_gdb_index_functions): Rename the function to
2709 dw2_expand_symtabs_with_fullname.
2710 * psymtab.c (read_psymtabs_with_filename): Rename to ...
2711 (read_psymtabs_with_fullname): ... here. Rename parameter filename to
2713 (psym_functions): Rename the function to read_psymtabs_with_fullname.
2714 * symfile.h (struct quick_symbol_functions): Rename field
2715 expand_symtabs_with_filename to expand_symtabs_with_fullname and its
2716 parameter filename to fullname. Document returned string meaning for
2718 * symtab.c (find_line_symtab): Rename the called function to
2719 expand_symtabs_with_fullname.
2721 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2724 * breakpoint.c (clear_command): Remove variable is_abs, unify the
2725 call of filename_cmp with compare_filenames_for_search.
2726 * dwarf2read.c (dw2_map_symtabs_matching_filename): Remove variable
2727 is_abs, unify the call of FILENAME_CMP with
2728 compare_filenames_for_search. New gdb_asserts for real_path and name.
2729 Unify the call of compare_filenames_for_search with FILENAME_CMP.
2730 * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
2731 * symfile.h (struct quick_symbol_functions): Extend the comment for
2732 map_symtabs_matching_filename.
2733 * symtab.c (compare_filenames_for_search): Remove the function comment
2734 relative path requirement. Handle absolute filenames, with a comment.
2735 (iterate_over_some_symtabs): Remove variable is_abs, unify the call of
2736 FILENAME_CMP with compare_filenames_for_search. New gdb_asserts for
2737 real_path and name. Unify the call of compare_filenames_for_search
2739 (iterate_over_symtabs): New gdb_assert on REAL_PATH.
2741 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2744 * breakpoint.c (print_breakpoint_location): Replace bp_location field
2745 source_file references by symtab field references. Remove variables
2747 (momentary_breakpoint_from_master, add_location_to_breakpoint):
2748 (clear_command, say_where): Replace bp_location field source_file
2749 references by symtab field references.
2750 (bp_location_dtor): Remove the source_file reference.
2751 (update_static_tracepoint): Replace bp_location field source_file
2752 references by symtab field references.
2753 (breakpoint_free_objfile): New function.
2754 * breakpoint.h (struct bp_location): Extend the comment for line_number.
2755 Replace the field source_file by field symtab, extend its comment.
2756 (breakpoint_free_objfile): New declaration.
2757 * objfiles.c (free_objfile): Call breakpoint_free_objfile.
2758 * tui/tui-winsource.c (tui_update_breakpoint_info): Replace bp_location
2759 field source_file references by symtab field references.
2761 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2763 Replace xfullpath calls by gdb_realpath calls.
2764 * cli/cli-cmds.c (find_and_open_script): Remove xfullpath from the
2766 * dwarf2read.c (dw2_map_expand_apply): Remove parameter full_path.
2767 Remove it from the iterate_over_some_symtabs call.
2768 (dw2_map_symtabs_matching_filename): Remove parameter full_path.
2769 Remove it from the dw2_map_expand_apply calls, remove a block handling
2771 * psymtab.c (partial_map_expand_apply): Remove parameter full_path.
2772 Remove it from the iterate_over_some_symtabs call.
2773 (partial_map_symtabs_matching_filename): Remove parameter full_path.
2774 Remove it from the partial_map_expand_apply calls, remove a block
2775 handling it. Drop gdb_realpath call and cleanups from the real_path
2777 * source.c (openp): Drop the comment part about xfullpath. Replace
2778 xfullpath calls by gdb_realpath calls.
2779 (find_and_open_source): Replace xfullpath call by gdb_realpath call.
2780 * symfile.h (struct quick_symbol_functions): Remove parameter full_path
2781 from method map_symtabs_matching_filename and its comment.
2782 * symmisc.c (maintenance_print_msymbols): Replace xfullpath call by
2784 * symtab.c (iterate_over_some_symtabs): Remove parameter full_path,
2785 remove it also from the function comment, remove a block handling it.
2786 Drop gdb_realpath call and cleanups from the real_path handling.
2787 (iterate_over_symtabs): Drop variable full_path and its use.
2788 * symtab.h (iterate_over_some_symtabs): Remove parameter full_path.
2789 * utils.c (xfullpath): Remove.
2790 * utils.h (xfullpath): Remove.
2792 2013-02-01 Andreas Tobler <andreast@fgznet.ch>
2794 * Makefile.in (ALL_TARGET_OBS): Add ppc64-tdep.o.
2795 (HFILES_NO_SRCDIR): Add ppc64-tdep.h.
2796 (ALLDEPFILES): Add ppc64-tdep.c.
2797 * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
2798 ppc64-tdep.o to gdb_target_obs.
2799 * ppc64-tdep.h: New file.
2800 * ppc64-tdep.c: New file.
2801 (insn_d, insn_ds, insn_xfx, ppc64_desc_entry_point): Move from
2802 ppc-linux-tdep.c to here.
2803 (PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN)
2804 (PPC64_STANDARD_LINKAGE2_LEN): Likewise and use ARRAY_SIZE macro.
2805 (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target)
2806 (ppc64_standard_linkage3_target, ppc64_skip_trampoline_code): Move
2807 from ppc-linux-tdep.c to here.
2808 (ppc64_convert_from_func_ptr_addr): Rename from
2809 ppc64_linux_convert_from_func_ptr_addr to
2810 ppc64_convert_from_func_ptr_addr and move from ppc-linux-tdep.c to
2813 (read_insn): Move from ppc-linux-tdep.c to here.
2814 (insns_match_pattern, insn_d_field, insn_ds_field): Move
2815 from ppc-linux-tdep.c to here and rename them with the ppc_ prefix.
2816 * ppc-linux-tdep.c: Include ppc64-tdep.h.
2817 Removed above functions.
2818 (ppc_linux_init_abi): Adjust.
2820 2013-02-01 Aleksandar Ristovski <aristovski@qnx.com>
2822 * ada-valprint.c (ada_print_floating): Remove unused 'len'.
2824 2013-02-01 Aleksandar Ristovski <aristovski@qnx.com>
2826 * ada-lang.c (assign_aggregate): Remove unused 'is_array_aggregate'.
2828 2013-02-01 Pedro Alves <palves@redhat.com>
2830 * dummy-frame.c (deprecated_pc_in_call_dummy): Delete function.
2831 * frame.h (deprecated_pc_in_call_dummy): Delete declaration.
2833 2013-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
2835 * elfread.c (elf_symfile_read): Limit separate debug info additions to
2836 files with no separate debug info.
2837 * objfiles.c (add_separate_debug_objfile): Add gdb_assert calls.
2838 * symfile.c (read_symbols): Call find_separate_debug_file_in_section
2839 only for files with no separate debug info.
2841 2013-01-31 Tom Tromey <tromey@redhat.com>
2843 * jit.c (jit_program_space_data): Rename from jit_inferior_data;
2845 (struct jit_program_space_data): Rename from jit_inferior_data.
2847 (get_jit_program_space_data): Rename from get_jit_inferior_data.
2848 Change return type. Attach data to program space.
2849 (jit_program_space_data_cleanup): Rename from
2850 jit_inferior_data_cleanup; change argument type.
2851 (jit_read_descriptor): Change 'inf_data' argument to 'ps_data',
2853 (jit_register_code): Update.
2854 (jit_update_inferior_cache): Remove.
2855 (jit_breakpoint_deleted): Get jit data from the location's program
2857 (jit_breakpoint_re_set_internal): Rename 'inf_data' argument to
2858 'ps_data', change type.
2859 (jit_inferior_init, jit_breakpoint_re_set_internal)
2860 (jit_event_handler): Update.
2861 (free_objfile_data): Get data from objfile's program space.
2862 (_initialize_jit): Update.
2864 2013-01-31 Tom Tromey <tromey@redhat.com>
2867 * jit.c (struct jit_inferior_data) <cached_code_address,
2868 jit_breakpoint>: New fields.
2869 (jit_breakpoint_re_set_internal): Fix logging. Only create
2870 breakpoint if cached address has changed.
2871 (jit_update_inferior_cache, jit_breakpoint_deleted): New
2873 (_initialize_jit): Register breakpoint deleted observer.
2875 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2877 * infrun.c (handle_syscall_event): Remove unused gdbarch.
2878 (save_infcall_suspend_state): Ifdef out unused inf.
2879 (restore_infcall_suspend_state): Ifdef out unused inf.
2880 * jit.c (jit_register_code): Remove unused i, b, inf_data.
2881 (jit_frame_sniffer): Remove unused inf_data.
2883 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2885 * c-exp.y (classify_inner_name): Remove unused type.
2886 * c-lang.c (c_printstr): Remove unused byte_order, i, things_printed,
2887 in_quotes, need_comma, wchar_buf, output, cleanup, iter, finished,
2889 (c_get_string): Remove unused kind.
2890 * c-typeprint.c (c_type_print_args): Remove unused i, len, args, table2.
2892 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2894 * charset.c (intermediate_encoding): Remove unused i.
2895 * completer.c (signal_completer): Remove unused i.
2896 * continuations.c (discard_my_continuations_1): Remove unused
2898 * corelow.c (core_close): Remove unuseD name.
2899 (get_core_siginfo): Remove unused pid.
2900 * cp-namespace.c (cp_lookup_symbol_imports_or_template): Remove unused
2902 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Remove unused base_offset.
2903 (loclist_describe_location): Remove unused first.
2904 * event-top.c (command_line_handler): Remove unused got_eof.
2905 * exec.c (exec_close_1): Remove unused need_symtab_cleanup.
2906 (resize_section_table): Remove unused old_value.
2907 * gdb_bfd.c (gdb_bfd_map_section): Remove unused header.
2908 * gnu-v3-abi.c (compute_vtable_size): Remove unused addr.
2909 * i386-tdep.c (i386_process_record): Remove unused rex.
2910 * infcmd.c (get_return_value): Remove unused uiout.
2911 * jv-lang.c (type_from_class): Remove unused is_array.
2912 * jv-valprint.c (java_val_print): Remove unused i.
2913 * linux-nat.c (linux_nat_stop_lwp): Remove unused ptid.
2914 * linux-thread-db.c (thread_db_find_new_threads_2): Remove unuseD pid.
2915 * m2-typeprint.c (m2_print_type): Remove unused code.
2916 * macroexp.c (get_character_constant): Remove unused body_start.
2917 (macro_stringify): Remove unused result.
2918 * objc-lang.c (find_methods): Remove unused gdbarch.
2919 * objfiles.c (filter_overlapping_sections): Remove unused abfd1, abfd2.
2920 * regcache.c (regcache_cooked_read): Remove unused gdbarch.
2921 * stack.c (print_frame_args): Remove unused summary.
2922 * thread.c (thread_apply_command): Remove unused p.
2923 * valarith.c (value_x_unop): Remove unused mangle_ptr.
2924 * valops.c (search_struct_method): Remove unused skip.
2925 * valprint.c (generic_val_print): Remove unused byte_order.
2926 * varobj.c (varobj_update): Remove unused changed.
2927 * cli/cli-cmds.c (complete_command): Remove unused next_item.
2928 (alias_command): Remove unused c.
2929 * mi/mi-cmd-catch.c (mi_catch_load_unload): Remove unused c.
2930 * mi/mi-main.c (mi_cmd_data_write_register_values): Remove unused
2932 (mi_cmd_data_write_memory): Remove unused word_format.
2933 (mi_cmd_data_write_memory_bytes): Remove unused r.
2934 * python/py-gdb-readline.c (gdbpy_readline_wrapper): Remove unused
2936 * python/python.c (_initialize_python): Remove unused cmd_name, cmd.
2937 * tui/tui-disasm.c (tui_set_disassem_content): Remove unused
2940 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2942 * dwarf2-frame.c (dwarf2_compile_cfa_to_ax): Remove unused num_regs.
2943 * symtab.c (iterate_over_symtabs): Remove unused s.
2944 (find_pc_sect_symtab): Remove unused pspAce.
2945 (find_pc_sect_line): Remove unused alt_symtab.
2946 (find_pcs_for_symtab_line): Remove unused ix, previous_function.
2947 (completion_list_add_name): Remove unused newsize.
2949 2013-01-31 Tom Tromey <tromey@redhat.com>
2952 * dwarf2read.c (read_tag_ptr_to_member_type): Handle
2955 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2957 * target.c (target_read_string): Remove unused origlen.
2959 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2961 * auto-load.c (auto_load_expand_dir_vars): Remove unused dir_vec.
2962 * ax-gdb.c (gen_printf): Remove unused expr, i, bot, fr, flen, fmt.
2963 * ax-general.c (ax_print): Remove unused is_float.
2964 * blockframe.c (block_innermost_frame): Remove unused start, end.
2965 * break-catch-sig.c (catch_signal_command): Remove unused gdbarch.
2967 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
2969 * solib-svr4.c (svr4_keep_data_in_core): Remove unused lmo.
2970 (svr4_read_so_list): Remove unused lmo.
2971 * solib-target.c (solib_target_relocate_section_addresses): Remove
2974 2013-01-30 Tom Tromey <tromey@redhat.com>
2976 * hppa-tdep.c (read_unwind_info): Use SECT_OFF_TEXT, not "0".
2978 2013-01-30 Tom Tromey <tromey@redhat.com>
2980 * symfile.c (get_file_crc): Use bfd_calc_gnu_debuglink_crc32.
2981 * utils.c (gnu_debuglink_crc32): Remove.
2982 * utils.h (gnu_debuglink_crc32): Don't declare.
2984 2013-01-30 Tom Tromey <tromey@redhat.com>
2986 * dwarf2read.c (compute_delayed_physnames, read_call_site_scope)
2987 (read_structure_type, read_enumeration_type): Remove cast.
2989 2013-01-30 Tom Tromey <tromey@redhat.com>
2991 * dwarf2read.c (read_namespace_type): Remove cast.
2992 (read_typedef): Likewise.
2994 2013-01-29 Tom Tromey <tromey@redhat.com>
2996 * dwarf2read.c (free_dwo_file): Remove assert.
2998 2013-01-29 Tom Tromey <tromey@redhat.com>
3000 * value.c (deprecated_set_value_modifiable): Remove.
3001 * value.h (deprecated_set_value_modifiable): Remove.
3003 2013-01-28 Doug Evans <dje@google.com>
3005 * dwarf2loc.c (dwarf2_find_location_expression): Don't add base address
3006 to addresses from dwo files.
3008 2013-01-25 Siva Chandra Reddy <sivachandra@google.com>
3010 * valops.c (find_overload_match): Remove unused argument 'lax'.
3011 * value.h: Remove unused argument 'lax' from the declaration of
3012 find_overload_match.
3013 * eval.c (value_subexp_standard): Do not pass a 'lax' argument
3014 to find_overload_match.
3015 * valarith.c (value_user_defined_cpp_op): Do not pass a 'lax'
3016 argument to find_overload_match.
3018 2013-01-25 Tom Tromey <tromey@redhat.com>
3020 * dwarf2read.c (processing_has_namespace_info): Remove.
3021 (struct dwarf2_cu) <processing_has_namespace_info>: New field.
3022 (process_die, read_func_scope, dwarf2_start_symtab)
3023 (new_symbol_full): Update.
3025 2013-01-25 Tom Tromey <tromey@redhat.com>
3027 * cp-namespace.c (cp_set_block_scope): Remove.
3028 * cp-support.h (cp_set_block_scope): Remove.
3029 * dbxread.c: Include block.h.
3030 (cp_set_block_scope): New function.
3031 (process_one_symbol): Update.
3032 * dwarf2read.c (read_func_scope): Use block_set_scope.
3034 2013-01-25 Pedro Alves <palves@redhat.com>
3036 * remote.c (add_current_inferior_and_thread): Tweak comment.
3038 2013-01-25 Tom Tromey <tromey@redhat.com>
3040 * cp-namespace.c (cp_scan_for_anonymous_namespaces): Update.
3041 (cp_add_using_directive): Add 'copy_names' argument.
3042 * cp-support.h (cp_add_using_directive): Update.
3043 (struct using_direct) <import_src, import_dest, alias,
3044 declaration>: Now const.
3045 * dwarf2read.c (read_import_statement): Use obconcat.
3046 Don't copy names passed to cp_add_using_directive.
3048 2013-01-25 Tom Tromey <tromey@redhat.com>
3050 * c-exp.y (qualified_name): Use TYPE_SAFE_NAME.
3052 2013-01-25 Pedro Alves <palves@redhat.com>
3054 * remote.c (stop_reply_extract_thread): New.
3055 (add_current_inferior_and_thread): New parameter 'wait_status'.
3057 (remote_start_remote): Pass wait status to
3058 add_current_inferior_and_thread.
3059 (extended_remote_run): Update comment.
3060 (extended_remote_create_inferior_1): Pass wait status to
3061 add_current_inferior_and_thread.
3063 2013-01-25 Andrew Burgess <aburgess@broadcom.com>
3064 Ulrich Weigand <uweigand@de.ibm.com>
3066 * valarith.c (value_vector_widen): New function for replicating a
3067 scalar into a vector.
3068 (value_binop): Use value_vector_widen to widen scalar to vector
3069 rather than casting, this better matches gcc C behaviour.
3070 * valops.c (value_casst): Update logic for casting between vector
3071 types, and for casting from scalar to vector, try to match gcc C
3073 * value.h (value_vector_widen): Declare.
3074 * opencl-lang.c (opencl_value_cast): New opencl specific casting
3075 function, handle special case for casting scalar to vector.
3076 (opencl_relop): Use opencl_value_cast.
3077 (evaluate_subexp_opencl): Use opencl_value_cast instead of
3078 value_cast, and handle BINOP_ASSIGN, UNOP_CAST, and UNOP_CAST_TYPE
3079 in order to use opencl_value_cast.
3081 2013-01-25 Yao Qi <yao@codesourcery.com>
3083 * event-loop.c: Include "queue.h".
3084 (gdb_event_p): New typedef.
3085 (DECLARE_QUEUE_P): Use.
3086 (DEFINE_QUEUE_P): Use.
3087 (async_queue_event): Remove.
3088 (gdb_event_xfree): New.
3089 (initialize_event_loop): New.
3090 (process_event): Use QUEUE macros.
3091 (event_queue): Remove.
3092 (gdb_wait_for_event): Caller update.
3093 (check_async_event_handlers): Likewise.
3094 (poll_timers): Likewise.
3095 * event-loop.h (initialize_event_loop): Declare.
3096 * event-loop.c (gdb_event_xfree): New.
3097 * top.c (gdb_init): Call initialize_event_loop.
3099 2013-01-25 Yao Qi <yao@codesourcery.com>
3101 * event-loop.c (async_queue_event): Remove one parameter
3102 'position'. Remove code handling 'position' == TAIL.
3103 (gdb_wait_for_event): Caller update.
3104 (check_async_event_handlers): Caller update.
3105 (poll_timers): Caller update.
3106 * event-loop.h (enum queue_position): Remove.
3108 2013-01-25 Maxim Kuvyrkov <maxim@kugelworks.com>
3110 * MAINTAINERS: Update my email.
3112 2013-01-25 Yao Qi <yao@codesourcery.com>
3114 * main.c (print_gdb_help): Remove "--epoch" from the help
3117 2013-01-24 Ulrich Weigand <uweigand@de.ibm.com>
3119 * symtab.c (skip_prologue_using_sal): Consider a file
3120 change the same as an increased line number
3122 2013-01-24 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
3124 * MAINTAINERS (Write After Approval): Add myself to the list.
3126 2013-01-24 Tom Tromey <tromey@redhat.com>
3128 * ada-lang.h (ada_decode_symbol): Make return type const.
3129 * ada-lang.c (ada_decode_symbol): Likewise.
3131 2013-01-23 Doug Evans <dje@google.com>
3133 * linespec.c (find_linespec_symbols): Make static.
3135 2013-01-23 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
3137 * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value): Set correct
3138 type on float conversion for complex type.
3140 2013-01-23 Siva Chandra Reddy <sivachandra@google.com>
3142 Add a new class gdb.Architecture which exposes GDB's
3143 internal representation of architecture via GDB Python API.
3144 * Makefile.in: Add entries corresponding to the new file
3146 * NEWS (Python Scripting): Add entries for the new class
3147 gdb.Architecture and the new method gdb.Frame.architecture.
3148 * python/py-arch.c: Implement gdb.Architecture class.
3149 * python/py-frame.c (frapy_arch): Implement the method
3150 gdb.Frame.architecture().
3151 (frame_object_methods): Add 'architecture' to the method table.
3152 * python/python-internal.h: Add declarations of new utility
3154 * python/python.c (_initialize_python): Initialize
3155 gdb.Architecture class.
3157 2013-01-23 Doug Evans <dje@google.com>
3159 Work around binutils/15021.
3160 * dwarf2read.c (dwarf2_per_cu_data): Split imported_symtabs and
3161 type_unit_group out of union s. All uses updated.
3162 (read_index_from_section): Watch for index version 8.
3163 (follow_die_sig): If using .gdb_index version <= 7, record the TU as
3165 (write_psymtabs_to_index): Increment version number to 8.
3167 2013-01-22 Pedro Alves <palves@redhat.com>
3169 * annotate.c (breakpoint_changed): Skip if breakpoint is not
3172 2013-01-22 Pedro Alves <palves@redhat.com>
3174 * annotate.c (annotate_breakpoints_changed): Rename to ...
3175 (annotate_breakpoints_invalid): ... this. Make static.
3176 (breakpoint_changed): Adjust.
3177 (_initialize_annotate): Always install the observers. Install a
3178 "breakpoint_created" observer.
3179 * annotate.h (annotate_breakpoints_changed): Delete declaration.
3180 * breakpoint.c (set_breakpoint_condition)
3181 (breakpoint_set_commands, do_map_commands_command)
3182 (init_raw_breakpoint, clear_command, set_ignore_count)
3183 (enable_breakpoint_disp): No longer call
3184 annotate_breakpoints_changed.
3186 2013-01-22 Pedro Alves <palves@redhat.com>
3188 * annotate.c: Include "inferior.h".
3189 (frames_invalid_emitted)
3190 (breakpoints_invalid_emitted): New globals.
3191 (async_background_execution_p): New function.
3192 (annotate_breakpoints_changed, annotate_frames_invalid): Skip
3193 emitting the annotation if it has already been emitted.
3194 (annotate_display_prompt): New function.
3195 * annotate.h (annotate_display_prompt): New declaration.
3196 * event-top.c: Include annotate.h.
3197 (display_gdb_prompt): Call annotate_display_prompt.
3199 2013-01-22 Pedro Alves <palves@redhat.com>
3201 * annotate.c (ignore_count_changed): Delete.
3202 (annotate_breakpoints_changed): Don't clear ignore_count_changed.
3203 (annotate_ignore_count_change): Delete.
3204 (annotate_stopped): Don't emit a delayed breakpoints-changed
3206 * annotate.h (annotate_ignore_count_change): Delete.
3207 * breakpoint.c (bpstat_check_breakpoint_conditions): Don't call
3208 annotate_ignore_count_change.
3210 2013-01-22 Tom Tromey <tromey@redhat.com>
3212 * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>: Only
3213 require_rvalue for a register location.
3215 2013-01-21 Marc Khouzam <marc.khouzam@ericsson.com>
3217 * breakpoint.c (print_one_breakpoint_location): Add MI
3218 field 'thread-groups' when printing a breakpoint.
3219 (output_thread_groups): New function.
3221 2013-01-21 Siva Chandra Reddy <sivachandra@google.com>
3223 * python/lib/gdb/commands/explore.py
3224 (CompoundExplorer.explore_expr): Correct the name of a method
3226 (ExploreTypeCommand.invoke): Add a missing 'return'.
3228 2013-01-21 Tom Tromey <tromey@redhat.com>
3230 * gdb_obstack.h (obconcat): Move declaration here, from...
3231 * symfile.h (obconcat): ... here.
3232 * gdb_obstack.c: New file.
3233 (obconcat): Move from...
3234 * symfile.c (obconcat): ... here.
3235 * Makefile.in (SFILES): Add gdb_obstack.c.
3236 (COMMON_OBS): Add gdb_obstack.o.
3238 2013-01-21 Tom Tromey <tromey@redhat.com>
3240 * symfile.h (obsavestring): Don't declare.
3241 * symfile.c (obsavestring): Remove.
3242 * ada-exp.y: Use obstack_copy0, not obsavestring.
3243 * ada-lang.c: Use obstack_copy0, not obsavestring.
3244 * coffread.c: Use obstack_copy0, not obsavestring.
3245 * cp-namespace.c: Use obstack_copy0, not obsavestring.
3246 * dbxread.c: Use obstack_copy0, not obsavestring.
3247 * dwarf2read.c: Use obstack_copy0, not obsavestring.
3248 * jit.c: Use obstack_copy0, not obsavestring.
3249 * mdebugread.c: Use obstack_copy0, not obsavestring.
3250 * psymtab.c: Use obstack_copy0, not obsavestring.
3251 * stabsread.c: Use obstack_copy0, not obsavestring.
3252 * xcoffread.c: Use obstack_copy0, not obsavestring.
3254 2013-01-21 Tom Tromey <tromey@redhat.com>
3256 * dwarf2read.c (fixup_go_packaging): Save package name
3258 * gdbtypes.c (init_type): Don't copy name.
3260 2013-01-21 Tom Tromey <tromey@redhat.com>
3262 * dwarf2read.c (struct partial_die_info) <name, scope>: Now
3264 (struct attribute) <u.str>: Now const.
3265 (struct fnfieldlist) <name>: Now const.
3266 (dw2_get_file_names_reader, init_cutu_and_read_dies): Update.
3267 (partial_die_parent_scope): Make return type const.
3268 (partial_die_full_name, add_partial_symbol): Update.
3269 (dwarf2_compute_name, dwarf2_full_name, dwarf2_physname): Make
3271 (find_file_and_directory): Make 'name' and 'comp_dir' const.
3272 (read_file_scope, read_func_scope, dwarf2_add_field)
3273 (dwarf2_add_member_fn, read_structure_type)
3274 (process_enumeration_scope, read_array_type, read_module_type)
3275 (read_base_type, read_subrange_type): Update.
3276 (dwarf2_start_symtab): Make 'name' and 'comp_dir' const.
3277 (new_symbol_full, guess_full_die_structure_name): Update.
3278 (dwarf2_canonicalize_name): Return const type. Make 'name' const.
3279 (dwarf2_name): Return const type.
3280 (dwarf_decode_macro_bytes, dwarf_decode_macros): Make 'comp_dir'
3283 2013-01-21 Tom Tromey <tromey@redhat.com>
3285 * gdbtypes.c (init_type): Make 'name' const.
3286 * gdbtypes.h (init_type): Update.
3288 2013-01-21 Tom Tromey <tromey@redhat.com>
3290 * buildsym.c (patch_subfile_names): Use set_last_source_file.
3291 (start_symtab): Make 'name' and 'dirname' const. Use
3292 set_last_source_file.
3293 (restart_symtab, reset_symtab_globals): Use set_last_source_file.
3294 (last_source_file): Define. Now static.
3295 (set_last_source_file, get_last_source_file): New functions.
3296 * buildsym.h (last_source_file): Don't declare.
3297 (start_symtab): Update.
3298 (set_last_source_file, get_last_source_file): Declare.
3299 * coffread.c (complete_symtab): Use set_last_source_file.
3300 (coff_end_symtab): Likewise.
3301 (coff_symtab_read): Use set_last_source_file, get_last_source_file.
3302 * dbxread.c (read_dbx_symtab, read_ofile_symtab): Use
3303 set_last_source_file.
3304 (process_one_symbol): Use get_last_source_file.
3305 * mdebugread.c (parse_partial_symbols): Use set_last_source_file.
3306 (psymtab_to_symtab_1): Use get_last_source_file.
3307 * xcoffread.c (process_linenos): Use get_last_source_file.
3308 (complete_symtab): Use set_last_source_file.
3309 (read_xcoff_symtab): Use set_last_source_file, get_last_source_file.
3310 (scan_xcoff_symtab): Use set_last_source_file.
3312 2013-01-21 Tom Tromey <tromey@redhat.com>
3314 * symtab.c (struct demangled_name_entry) <mangled>: Now const.
3315 (symbol_set_names): Remove casts. Handle field const-ness.
3317 2013-01-21 Tom Tromey <tromey@redhat.com>
3319 * dwarf2read.c (new_symbol_full): Remove cast.
3320 * symtab.c (symbol_set_demangled_name): Make 'name' const.
3321 * symtab.h (symbol_set_demangled_name): Update.
3323 2013-01-21 Tom Tromey <tromey@redhat.com>
3325 * main.c (captured_main): Call bfd_init.
3327 2013-01-21 Tom Tromey <tromey@redhat.com>
3329 * gnu-v2-abi.c (_initialize_gnu_v2_abi): Don't set default ABI.
3330 * gnu-v3-abi.c (_initialize_gnu_v3_abi): Set default ABI.
3331 * minsyms.c (install_minimal_symbols): Don't check for _Z symbols.
3334 2013-01-21 Jan Kratochvil <jan.kratochvil@redhat.com>
3336 * symmisc.c (maintenance_print_msymbols): Check also ST_DEV.
3338 2013-01-21 Jan Kratochvil <jan.kratochvil@redhat.com>
3340 Fix gdb.fortran/common-block.exp crash in PIE mode.
3341 * dwarf2read.c (new_symbol_full) <DW_TAG_common_block>: Use
3343 * f-valprint.c (info_common_command_for_block): Expect
3344 LOC_COMMON_BLOCK in gdb_assert.
3345 * symtab.h (struct general_symbol_info): Update comment for the
3346 common_block member.
3347 (domain_enum): Extend comment for the COMMON_BLOCK_DOMAIN member.
3348 (enum address_class): New member LOC_COMMON_BLOCK.
3350 2013-01-18 David Blaikie <dblaikie@gmail.com>
3352 * MAINTAINERS (Write After Approval): Add "David Blaikie".
3354 2013-01-18 Tom Tromey <tromey@redhat.com>
3357 * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>:
3358 Call require_rvalue.
3360 2013-01-18 Yao Qi <yao@codesourcery.com>
3362 * dbxread.c (dbx_psymtab_to_symtab): Delete the declaration.
3363 (dbx_read_symtab): New declaration.
3364 (dbx_psymtab_to_symtab): Delete.
3365 (dbx_read_symtab): Rename from dbx_psymtab_to_symtab.
3366 Rename parameter PST to SELF. Exchanged two parameters.
3367 (start_psymtab): Caller update.
3368 * dwarf2read.c (dwarf2_psymtab_to_symtab): Delete the declaration.
3369 (dwarf2_read_symtab): New declaration.
3370 (dwarf2_psymtab_to_symtab): Delete.
3371 (dwarf2_read_symtab): Rename from dwarf2_psymtab_to_symtab.
3372 Rename parameter PST to SELF. Exchanged two parameters.
3373 (create_partial_symtab): Caller update.
3374 * mdebugread.c (mdebug_psymtab_to_symtab): Delete.
3375 (mdebug_read_symtab): Rename from mdebug_psymtab_to_symtab.
3376 Rename parameter PST to SELF. Exchanged two parameters.
3377 (parse_partial_symbols, new_psymtab): Caller update.
3378 * psympriv.h (struct partial_symtab) <read_symtab>: Exchange
3380 * psymtab.c (psymtab_to_symtab): Caller update.
3381 * xcoffread.c (xcoff_psymtab_to_symtab): Delete.
3382 (xcoff_read_symtab): Rename from xcoff_psymtab_to_symtab.
3383 Rename parameter PST to SELF. Exchanged two parameters.
3384 (xcoff_start_psymtab): Caller update.
3386 2013-01-18 Yao Qi <yao@codesourcery.com>
3388 * infrun.c (proceed): Rename local variable 'oneproc' to
3391 2013-01-17 Doug Evans <dje@google.com>
3393 * dwarf2read.c (dw2_build_type_unit_groups_reader): Delete.
3394 (dw2_build_type_unit_groups): Delete. All uses updated.
3396 * symtab.h (struct symbol_search): Add comment.
3398 2013-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
3400 * symtab.c (compare_filenames_for_search): New comment for
3403 2013-01-17 Tom Tromey <tromey@redhat.com>
3405 * cp-abi.c (cp_abi_completer): Fix typo in assignment.
3407 2013-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
3409 * symtab.c (iterate_over_some_symtabs): New variable cleanups,
3410 initialize it by existing make_cleanup. Call new do_cleanups.
3412 2013-01-17 Tom Tromey <tromey@redhat.com>
3414 * cp-abi.c (cp_abi_completer): New function.
3415 (_initialize_cp_abi): Set completer for "set cp-abi".
3417 2013-01-17 Tom Tromey <tromey@redhat.com>
3419 * mem-break.c: Remove obsolete comment.
3420 * bfin-tdep.c (bfin_breakpoint_from_pc): Fix comment.
3422 2012-01-17 Sanjoy Das <sanjoy@playingwithpointers.com>
3424 * jit.c (jit_reader_load_command): Interpret the jit reader name
3425 as an absolute path if it begins with a forward slash.
3427 2012-01-17 Sanjoy Das <sanjoy@playingwithpointers.com>
3431 * jit.c (finalize_symtab): Ensure that only the global block has a
3434 2013-01-17 Pedro Alves <palves@redhat.com>
3436 * acinclude.m4: Include ../config/plugins.m4,
3437 ../config/largefile.m4 and ../config/lead-dot.m4. Add comments.
3438 * Makefile.in (aclocal_m4_deps): Update.
3439 * aclocal.m4: Renegerate.
3441 2013-01-16 Doug Evans <dje@google.com>
3443 * contrib/cc-with-tweaks.sh: Add references to Fission docs.
3445 2013-01-16 Pedro Alves <palves@redhat.com>
3446 Tom Tromey <tromey@redhat.com>
3449 * NEWS: Add "catch signal".
3450 * breakpoint.c (base_breakpoint_ops): No longer static.
3451 (bpstat_explains_signal): New function.
3452 (init_catchpoint): No longer static.
3453 (base_breakpoint_explains_signal): New function.
3454 (base_breakpoint_ops): Initialize new field.
3455 * breakpoint.h (enum bpstat_signal_value): New.
3456 (struct breakpoint_ops) <explains_signal>: New field.
3457 (bpstat_explains_signal): Remove macro, declare as function.
3458 (base_breakpoint_ops, init_catchpoint): Declare.
3459 * break-catch-sig.c: New file.
3460 * inferior.h (signal_catch_update): Declare.
3461 * infrun.c (signal_catch): New global.
3462 (handle_syscall_event): Update for change to
3463 bpstat_explains_signal.
3464 (handle_inferior_event): Likewise. Always handle random signals
3466 (signal_cache_update): Check signal_catch.
3467 (signal_catch_update): New function.
3468 (_initialize_infrun): Initialize signal_catch.
3469 * Makefile.in (SFILES): Add break-catch-sig.c.
3470 (COMMON_OBS): Add break-catch-sig.o.
3472 2013-01-16 Tom Tromey <tromey@redhat.com>
3474 * breakpoint.c (print_one_catch_fork, print_one_catch_vfork)
3475 (print_one_catch_solib, print_one_catch_syscall)
3476 (print_one_catch_exec, print_one_exception_catchpoint): Emit
3479 2013-01-16 Yao Qi <yao@codesourcery.com>
3481 * printcmd.c (current_display_number): Make it static.
3483 2013-01-16 Yao Qi <yao@codesourcery.com>
3485 * infcmd.c (step_once): Don't check '!single_inst' as it was
3488 2013-01-15 Jan Kratochvil <jan.kratochvil@redhat.com>
3490 * dwarf2read.c (psymtab_include_file_name): Extend the function comment.
3492 2013-01-14 Tom Tromey <tromey@redhat.com>
3494 * cli/cli-decode.c (add_setshow_string_noescape_cmd): Return the
3496 * command.h (add_setshow_string_noescape_cmd): Update.
3497 * corefile.c (set_gnutarget_command): Remove trailing whitespace.
3498 (complete_set_gnutarget): New function.
3499 (_initialize_core): Set the "set gnutarget" completer.
3501 2013-01-14 Tom Tromey <tromey@redhat.com>
3504 * c-typeprint.c (cp_type_print_method_args): Handle 'restrict'.
3505 (c_type_print_modifier): Likewise.
3506 * dwarf2read.c (read_tag_restrict_type): New function.
3507 (read_type_die_1): Handle DW_TAG_restrict_type.
3508 * gdbtypes.c (make_restrict_type): New function.
3509 (recursive_dump_type): Handle TYPE_RESTRICT.
3510 * gdbtypes.h (enum type_flag_values): Renumber.
3511 (enum type_instance_flag_value): Add
3512 TYPE_INSTANCE_FLAG_RESTRICT.
3513 (TYPE_RESTRICT): New macro.
3514 (make_restrict_type): Declare.
3516 2013-01-14 Tom Tromey <tromey@redhat.com>
3519 * psymtab.c (struct psymtab_state): New.
3520 (discard_psymtabs_upto, make_cleanup_discard_psymtabs): New
3522 * psympriv.h (make_cleanup_discard_psymtabs): Declare.
3523 * dwarf2read.c (dwarf2_build_psymtabs): Catch exceptions.
3525 2013-01-14 Richard Sharman <richard_sharman@mitel.com>
3526 Pedro Alves <palves@redhat.com>
3530 * remote.c (remote_threads_info): Make a copy of the reply from
3531 qfThreadInfo and use that instead of rs->buf.
3533 2013-01-14 Yao Qi <yao@codesourcery.com>
3535 * dbxread.c (dbx_psymtab_to_symtab_1): Don't check PST is NULL.
3536 (dbx_psymtab_to_symtab): Likewise.
3537 * dwarf2read.c (dwarf2_psymtab_to_symtab): Likewise.
3538 * mdebugread.c (mdebug_psymtab_to_symtab): Likewise.
3539 * xcoffread.c (xcoff_psymtab_to_symtab_1): Likewise.
3541 2013-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
3543 * parse.c (parse_exp_in_context): New variable inner_chain. Call
3544 make_cleanup_restore_current_language. Call set_language. Move
3545 OLD_CHAIN and INNER_CHAIN cleanups.
3546 * utils.c (do_restore_current_language)
3547 (make_cleanup_restore_current_language): New functions.
3548 * utils.h (make_cleanup_restore_current_language): New declaration.
3550 2013-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
3552 * source.c (symtab_to_fullname): Apply rewrite_source_path also for
3555 * source.c (symtab_to_fullname): Do not prepend DIRNAME for
3556 non-existing files if FILENAME is already absolute.
3558 2013-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3560 * macrocmd.c (macro_inform_no_debuginfo): Use puts_filtered instead of
3561 fputs_filtered. Append trailing newline.
3563 2013-01-11 Yao Qi <yao@codesourcery.com>
3564 Stan Shebs <stan@codesourcery.com>
3566 * psymtab.c (init_psymbol_list): Clarify the comment.
3568 2013-01-11 Yao Qi <yao@codesourcery.com>
3570 * breakpoint.c (print_one_breakpoint_location): Remove dead code.
3571 (update_dprintf_command_list): Assert that 'printf_line' is
3572 non-null. Remove condition check.
3574 2013-01-10 Jan Kratochvil <jan.kratochvil@redhat.com>
3577 * psymtab.c (psymtab_to_fullname, psymtab_to_fullname): Make the return
3579 * tui/tui-source.c (tui_source_is_displayed): Make the parameter fname
3581 * tui/tui-source.h (tui_source_is_displayed): Likewise.
3583 2013-01-09 Anthony Green <green@moxielogic.com>
3585 * cp-abi.c (cplus_print_vtable): Don't return value from void
3587 * ada-lang.c (re_set_catch_assert): Ditto.
3589 2013-01-09 Doug Evans <dje@google.com>
3591 * symfile.h (quick_symbol_functions): Delete member
3592 pre_expand_symtabs_matching. All uses removed.
3593 * dwarf2read.c (dw2_lookup_symbol): Implement.
3594 (dw2_do_expand_symtabs_matching): Delete.
3595 (dw2_pre_expand_symtabs_matching): Delete.
3596 (struct dw2_symtab_iterator): New type.
3597 (dw2_symtab_iter_init, dw2_symtab_iter_next): New functions.
3598 (dw2_expand_symtabs_for_function): Rewrite.
3599 (dwarf2_gdb_index_functions): Update.
3600 * psymtab.c (pre_expand_symtabs_matching_psymtabs): Delete.
3601 (psym_functions): Update.
3603 2013-01-09 Tom Tromey <tromey@redhat.com>
3605 * config/pa/hpux.mh (NATDEPFILES): Remove somread.o.
3606 * configure: Rebuild.
3607 * configure.ac: Add somread.o to the build if BFD has SOM
3609 * somread.c: Include som/aout.h, not syms.h.
3610 (som_symtab_read): Use som_external_symbol_dictionary_record.
3611 Unpack records manually.
3612 (_initialize_somread): Declare.
3614 2012-01-08 Mike Frysinger <vapier@gentoo.org>
3616 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx) [__x86_64__]:
3617 Cast return_address to 64bits.
3619 2013-01-08 Hui Zhu <hui_zhu@mentor.com>
3621 * printcmd.c: Remove define of function output_command.
3622 * tracepoint.c: Remove extern of function output_command.
3623 * valprint.h: (output_command): New extern.
3625 2013-01-07 Tom Tromey <tromey@redhat.com>
3627 * objc-lang.c (objc_emit_char, objc_printchar, objc_printstr):
3629 (objc_language_defn): Use c_printchar, c_printstr,
3632 2013-01-07 Tom Tromey <tromey@redhat.com>
3636 * ada-valprint.c (printstr, print_field_values): Remove
3638 * cp-valprint.c (cp_print_value_fields): Remove "inspect_it"
3640 * jv-valprint.c (java_print_value_fields): Remove "inspect_it"
3642 * m2-lang.c (m2_printstr): Remove "inspect_it" code.
3643 * main.c (captured_main): Remove "epoch" argument.
3644 * objc-lang.c (objc_printstr): Remove "inspect_it" code.
3645 * p-lang.c (pascal_printstr): Remove "inspect_it" code.
3646 * p-valprint.c (pascal_object_print_value_fields): Remove
3648 * printcmd.c (print_command_1): Remove 'inspect' argument.
3649 (print_command, call_command): Update.
3650 (inspect_command): Remove.
3651 (_initialize_printcmd): Make "inspect" an alias for "print".
3652 * top.c (epoch_interface): Remove.
3653 * top.h (epoch_interface): Remove.
3654 * valprint.c (user_print_options): Update.
3655 (print_converted_chars_to_obstack): Remove "inspect_it" code.
3656 * valprint.h (struct value_print_options) <inspect_it>: Remove
3659 2013-01-04 Tom Tromey <tromey@redhat.com>
3661 * valprint.h (read_string): Add 'extern'.
3663 2013-01-07 Joel Brobecker <brobecker@adacore.com>
3665 * darwin-nat.c: Fix typo in TASK_DYLD_INFO_COUNT macro test
3666 used to decide whether to define darwin_read_dyld_info or not.
3668 2013-01-03 Pierre Muller <muller@sourceware.org>
3670 * main.c (relocate_gdb_directory): Avoid calling stat function
3673 2013-01-03 Yao Qi <yao@codesourcery.com>
3675 * psymtab.c (fixup_psymbol_section): Update declaration.
3676 (fixup_psymbol_section): Remove code returning value.
3678 2013-01-03 Yao Qi <yao@codesourcery.com>
3680 * symtab.h: Remove some out of date comments.
3681 (enum exception_event_kind): Move it ...
3682 * breakpoint.c: ... here.
3684 2013-01-02 Iain Sandoe <developer@sandoe-acoustics.co.uk>
3687 * darwin-nat.c (darwin_read_dyld_info): Only build if
3688 TASK_DYLD_INFO_COUNT is defined.
3689 (darwin_xfer_partial): Call darwin_read_dyld_info only if
3690 TASK_DYLD_INFO_COUNT is defined.
3692 2013-01-02 Tom Tromey <tromey@redhat.com>
3694 * symfile.h (struct ecoff_debug_hack): Remove.
3695 * objfiles.c: Don't include mdebugread.h.
3697 2013-01-02 Tom Tromey <tromey@redhat.com>
3699 * config/i386/darwin.mh (NATDEPFILES): Remove machoread.o.
3700 * configure.ac: Check for Mach-O support in BFD. Update
3702 * configure: Rebuild.
3704 2013-01-02 Tom Tromey <tromey@redhat.com>
3706 * acinclude.m4 (GDB_AC_CHECK_BFD): New macro.
3707 * configure.ac: Use GDB_AC_CHECK_BFD.
3708 * configure: Rebuild.
3710 2013-01-01 Maxim Kuvyrkov <maxim.kuvyrkov@gmail.com>
3712 * MAINTAINERS: Update my email.
3714 2013-01-01 Joel Brobecker <brobecker@adacore.com>
3716 * cli/cli-script.h (make_cleanup_free_command_lines): Make extern.
3718 2013-01-01 Joel Brobecker <brobecker@adacore.com>
3720 * rs6000-nat.c (bss_data_overlap): New function.
3721 (vmap_symtab): Use it to adjust the .bss section's offset.
3723 2013-01-01 Joel Brobecker <brobecker@adacore.com>
3725 Update year range in copyright notice of all files.
3727 2013-01-01, 13 Joel Brobecker <brobecker@adacore.com>
3729 * top.c (print_gdb_version): Update copyright year.
3731 For older changes see ChangeLog-2012.
3737 version-control: never