1 2009-10-16 Michael Eager <eager@eagercon.com>
3 * microblaze-linux-tdep.c:
4 microblaze_linux_memory_remove_breakpoint(): Add gdbarch to param,
5 replace frame_pc_unwind with get_frame_address_in_block.
6 * microblaze-tdep.c: Remove MICROBLAZE_REGISTER_SIZE.
7 * microblaze-tdep.h: Add MICROBLAZE_REGISTER_SIZE.
9 2008-10-15 Steven G. Kargl <kargl@gcc.gnu.org>
11 * amd64fbsd-nat.c (amd64fbsd_supply_pcb): Conditionally compile in
12 support for pcb->pcb_{fs,ds,es,gs} on FreeBSD older than 8.0.
14 2009-10-15 Michael Eager <eager@eagercon.com>
16 * config/djgpp/fnchange.lst: Add translations for cpu-microblaze.c,
17 elf32-microblaze.c, microblaze-rom.c, microblaze-linux-tdep.c,
18 microblaze-tdep.h, microblaze-tdep.c, microblaze-opc.h,
19 microblaze-opcm.h, microblaze-dis.c, microblaze-dis.h, sim/microblaze,
20 microblaze.h, and microblaze.isa.
21 * configure.tgt: Add targets microblaze*-linux-*, microblaze*-xilinx-*.
22 * Makefile.in: Build microblaze-tdep.o, microblaze-linux-tdep.o.
23 HFILES_NO_SRCDIR: Add microblaze-tdep.h.
24 * microblaze-linux-tdep.c: New.
25 * microblaze-tdep.c: New.
26 * microblaze-tdep.h: New.
27 * NEWS: Announce Xilinx MicroBlaze support.
29 2009-10-15 Paul Pluzhnikov <ppluzhnikov@google.com>
32 * linux-nat.c (linux_nat_post_attach_wait): Adjust assert.
33 (lin_lwp_attach_lwp, linux_nat_attach): Handle disappearing LWP.
35 2009-10-15 Michael Snyder <msnyder@vmware.com>
37 * record.c (record_insn_max_num): Make unsigned.
38 (_initialize_record): Use uinteger instead of zinteger for
39 set command, so that it will report "unlimited" for zero.
41 2009-10-15 Michael Snyder <msnyder@vmware.com>
43 * record.c (record_reg_alloc): New function.
44 (record_reg_release): New function.
45 (record_mem_alloc): New function.
46 (record_mem_release): New function.
47 (record_end_alloc): New function.
48 (record_end_release): New function.
49 (record_entry_release): New function.
50 (record_list_release): Simplify, call record_entry_release.
51 (record_list_release_next): Rename to record_list_release_following.
52 Simplify and call record_entry_release.
53 (record_list_release_first): Simplify, comment, and use
55 (record_arch_list_add_reg): Simplify, call record_reg_alloc.
56 (record_arch_list_add_mem): Simplify, call record_mem_alloc.
57 (record_arch_list_add_end): Simplify, call record_end_alloc.
59 2009-10-14 Michael Snyder <msnyder@vmware.com>
61 * record.c (record_list_release_first): Do not decrement
63 (set_insn_num_max): Remove printf.
64 Decrement record_insn_num in the loop.
66 2009-10-14 Cary Coutant <ccoutant@google.com>
68 * dwarf2read.c (read_import_statement): Call follow_die_ref_or_sig.
70 2009-10-14 Keith Seitz <keiths@redhat.com>
72 * dwarf2read.c (dwarf2_const_value): Fix order of arguments to
73 store_unsigned_integer.
75 2009-10-14 Pedro Alves <pedro@codesourcery.com>
77 * configure.ac (build_warnings): Add -Wunused-value.
78 * configure: Regenerate.
80 2009-10-14 Tristan Gingold <gingold@adacore.com>
82 * solib-darwin.c: Remove trailing whitespaces.
83 (darwin_dyld_version_ok): Fix typo.
85 2009-10-14 Andrew Stubbs <ams@codesourcery.com>
87 * sh-tdep.c (sh_gdbarch_init): Add show_regs settings for
88 bfd_mach_sh3_nommu, bfd_mach_sh2a_nofpu_or_sh3_nommu,
89 bfd_mach_sh2a_or_sh3e, bfd_mach_sh2a_or_sh4, bfd_mach_sh4_nommu_nofpu,
90 and bfd_mach_sh2a_nofpu_or_sh4_nommu_nofpu.
91 Move bfd_mach_sh2a_or_sh4 to use the same configuration as
94 2009-10-13 Daniel Jacobowitz <dan@codesourcery.com>
96 * arm-tdep.c (arm_push_dummy_call): Set the low bit of LR for
98 (thumb_get_next_pc): Handle Thumb-2 and ARM v6 instructions. Refuse
99 to single step into IT blocks.
101 2009-10-13 Pedro Alves <pedro@codesourcery.com>
103 * infcall.c (call_function_by_hand): Formatting.
105 2009-10-13 Tristan Gingold <gingold@adacore.com>
107 * solib-darwin.c: Add an empty line after comment for functions.
108 (struct gdb_dyld_all_image_infos): Improve comment.
109 (DYLD_VERSION): Removed and replaced by ...
110 (DYLD_VERSION_MAX, DYLD_VERSION_MIN): ... New macros.
111 (darwin_dyld_version_ok): New function.
112 (darwin_load_image_infos): Call darwin_dyld_version_ok.
113 (darwin_current_sos): Ditto.
114 (darwin_solib_create_inferior_hook): Ditto.
116 2009-10-13 Tristan Gingold <gingold@adacore.com>
118 * machoread.c: Add an empty line after comment for functions.
119 (oso_el_compare_name): New function.
120 (macho_add_oso_symfile): New function.
121 (macho_oso_symfile): Use macho_add_oso_symfile. Sort the oso
122 and optimize accesses to libraries.
124 2009-10-13 Tristan Gingold <gingold@adacore.com>
126 * objfiles.c (objfile_has_symbols): New function.
127 * objfiles.h (objfile_has_symbols): Add prototype.
128 * symfile.c (symbol_file_add_with_addrs_or_offsets): Call
130 (reread_symbols): Ditto.
132 2009-10-12 Jiang Jilin <freephp@gmail.com>
134 * i386-tdep.c (i386_process_record): Add xgetbv/xsetbv
135 instructions support.
137 2009-10-11 Pedro Alves <pedro@codesourcery.com>
139 * procfs.c (procfs_make_note_section): Go back to only outputing
140 an NT_PSTATUS note when UNIXWARE is defined.
142 2009-10-11 Daniel Jacobowitz <dan@codesourcery.com>
144 * features/xinclude.dtd: Correct EMPTY typo.
146 2009-10-10 Michael Snyder <msnyder@vmware.com>
148 * i386-tdep.c (i386_process_record): Or-equals, not not-equals.
150 2009-10-10 Pedro Alves <pedro@codesourcery.com>
152 * mi/mi-cmd-stack.c (list_args_or_locals): Use internal_error.
153 Put "break" statements on their own line.
155 2009-10-09 Pedro Alves <pedro@codesourcery.com>
157 * linux-nat.c (linux_nat_wait_1): Bail out, if TARGET_WNOHANG and
158 we found no event while waiting for a specific LWP.
159 * infrun.c (handle_inferior_event): Handle TARGET_WAITKIND_IGNORE
160 before anything else.
162 2009-10-09 Pedro Alves <pedro@codesourcery.com>
164 * procfs.c (procfs_make_note_section): Always output a NT_PSTATUS
165 note when NEW_PROC_API is defined.
167 2009-10-09 Pedro Alves <pedro@codesourcery.com>
169 * corelow.c (core_has_fake_pid): New.
170 (core_close): Clear it.
171 (add_to_thread_list): Fake a pid if one is not found on a Solaris
172 core. Add the inferior here. Always add the thread, don't use
174 (core_open): Don't add the main thread or the inferior here unless
175 we find that the core had no .reg/NN sections.
176 (get_core_register_section): Handle Solaris cores with fake pids.
178 * corelow.c (add_to_thread_list): Fix typo.
180 2009-10-08 Paul Pluzhnikov <ppluzhnikov@google.com>
183 * elfread.c (elf_symtab_read): Don't use alloca in a loop.
185 2009-10-07 Jan Kratochvil <jan.kratochvil@redhat.com>
187 * i386-nat.c (i386_stopped_by_hwbp): Remove.
189 2009-10-07 Joel Brobecker <brobecker@adacore.com>
191 * NEWS: Update following the GDB 7.0 release.
193 2009-10-07 Pierre Muller <muller@ics.u-strasbg.fr>
195 ARI fix: OP eol rule.
196 * doublest.c (floatformat_from_length): Avoid operator at end of line.
197 * dwarf2-frame.c (dwarf2_build_frame_info): Idem.
198 * dwarf2read.c (read_array_order, dwarf_decode_macros): Idem.
199 * eval.c (evaluate_subexp_standard): Idem.
200 * event-loop.c (create_timer, handle_timer_event): Idem.
201 * expprint.c (print_subexp_standard): Idem.
202 * f-exp.y (variable): Idem.
203 * f-typeprint.c (f_print_type): Idem.
205 2009-10-06 Pierre Muller <muller@ics.u-strasbg.fr>
207 ARI fix: OP eol rule.
208 * blockframe.c (find_pc_partial_function): Avoid operator at end of
210 * buildsym.c (find_symbol_in_list): Idem.
211 (start_subfile, patch_subfile_names): Idem.
212 * c-exp.y (variable, yylex): Idem.
213 * c-typeprint.c (c_print_type, c_type_print_base): Idem.
214 * c-valprint.c (c_val_print): Idem.
215 * coffread.c (patch_opaque_types, process_coff_symbol): Idem.
216 * corelow.c (core_open): Idem.
217 * cris-tdep.c (move_reg_to_mem_movem_op): Idem.
218 * cli/cli-decode.c (help_cmd_list, find_command_name_length): Idem.
220 2009-10-06 Pierre Muller <muller@ics.u-strasbg.fr>
222 ARI fix: OP eol rule.
223 * ada-exp.y (block_lookup): Avoid operator at end of line.
224 * aix-thread.c (pd_enable): Idem.
225 * alpha-tdep.c (alpha_next_pc): Idem.
226 * arm-tdep.c (arm_skip_prologue, arm_scan_prologue): Idem.
227 (condition_true, coff_sym_is_thumb): Idem.
229 2009-10-06 Joel Brobecker <brobecker@adacore.com>
233 2009-10-06 Pierre Muller <muller@ics.u-strasbg.fr>
236 * target.c (debug_to_thread_architecture): Replace %p by %s using
237 host_address_to_string function.
239 2009-10-06 Tristan Gingold <gingold@adacore.com>
241 * darwin-nat.c: Add __TEXT __info_plist content.
242 (darwin_attach_pid): Update error message.
244 2009-10-06 Joel Brobecker <brobecker@adacore.com>
246 * MAINTAINERS: Add Tristan Gingold as Maintainer of the Darwin port.
248 2009-10-06 Joel Brobecker <brobecker@adacore.com>
250 * MAINTAINERS: Add Jan Kratochvil as Maintainer of the ia64 target.
252 2009-10-05 Pedro Alves <pedro@codesourcery.com>
255 2009-10-04 Pedro Alves <pedro@codesourcery.com>
256 * gdbinit.in: Set data-directory to @srcdir@.
258 2009-10-04 Pedro Alves <pedro@codesourcery.com>
260 * NEWS: Mention non-stop mode.
262 2009-10-04 Pedro Alves <pedro@codesourcery.com>
264 * gdbinit.in: Set data-directory to @srcdir@.
266 2009-10-02 Pedro Alves <pedro@codesourcery.com>
268 * linux-nat.c (TRAP_IS_SYSCALL, TRAP_REMOVE_SYSCALL_FLAG): Delete.
269 (SYSCALL_SIGTRAP): New.
270 (status_to_str): Adjust.
271 (get_pending_status): Pending events in lp->waitstatus don't map
272 to any signal. Simplify.
273 (linux_handle_syscall_trap): New.
274 (linux_handle_extended_wait): When handling PTRACE_EVENT_CLONE
275 events, use linux_ops->to_resume instead of direct ptrace with
276 PTRACE_CONT. Remove all TRAP_IS_SYSCALL handling.
277 (wait_lwp): Handle syscall traps with linux_handle_syscall_trap,
278 and clear the sysgood bit.
279 (status_callback): Make it clearer and add comments.
280 (cancel_breakpoints_callback): Ignore if LP has waitstatus set.
281 (linux_nat_filter_event): Handle syscall traps with
282 linux_handle_syscall_trap, and clear the sysgood bit. Move the
283 check for storing siginfo to after handling extended statuses and
284 syscall traps. Store status in the lwp object.
285 (linux_wait_1): Don't swap the pending status out of the lwp
286 object until after deciding we found an lwp with an interesting
287 event. Requeue a new pending signal if we find one while getting
288 rid or a pending SIGSTOP we sent ourselves. Don't clear the
291 * infrun.c (deal_with_syscall_event): Rename to ...
292 (handle_syscall_event): ... this. Always context switch and set
293 stop_pc, even if not catching the syscall. If not catching the
294 syscall, always resume with keep_going.
295 (handle_inferior_event): Adjust.
297 2009-10-02 Jan Kratochvil <jan.kratochvil@redhat.com>
299 Fix compatibility of --with-system-readline and readline-6.0+.
300 * configure.ac <--with-system-readline> (for readline_echoing_p): New
302 * config.in: Regenerate.
303 * configure: Regenerate.
305 2009-10-01 Joel Brobecker <brobecker@adacore.com>
307 * MAINTAINERS: Move Don Lee to the correct section (Write After
310 2009-10-01 Phil Muldoon <pmuldoon@redhat.com>
312 * infcall.c (call_function_by_hand): Add a new cleanup branch for
313 std::terminate breakpoints.
315 2009-09-29 Jan Kratochvil <jan.kratochvil@redhat.com>
317 * ia64-tdep.c (ia64_convert_from_func_ptr_addr): New variable buf.
318 Check first the descriptor memory is readable.
320 2009-09-29 Tom Tromey <tromey@redhat.com>
322 * python/py-value.c (valpy_string): NULL-terminate 'keywords'.
324 2009-09-29 Ulrich Weigand <uweigand@de.ibm.com>
326 * s390-tdep.c (s390_displaced_step_fixup): Use type ULONGEST
327 instead of CORE_ADDR for "amode".
329 2009-09-29 Joel Brobecker <brobecker@adacore.com>
331 * ia64-tdep.c: Update the comments on how we insert/remove
332 breakpoints for L-X instructions.
333 (ia64_memory_insert_breakpoint, ia64_memory_remove_breakpoint):
334 Update the comments inside these functions.
336 2009-09-28 Ulrich Weigand <uweigand@de.ibm.com>
338 * gdbarch.sh (displaced_step_hw_singlestep): New callback.
339 * gdbarch.c, gdbarch.h: Regenerate.
340 * arch-utils.c (default_displaced_step_hw_singlestep): New function.
341 * arch-utils.h (default_displaced_step_hw_singlestep): Add prototype.
343 * ppc-linux-tdep.c (ppc_displaced_step_hw_singlestep): New function.
344 (rs6000_gdbarch_init): Install it.
346 * infrun.c (displaced_step_fixup): Use new callback to determine
347 whether to "step" or "continue" displaced copy.
348 (resume): Likewise. Do not call maybe_software_singlestep
349 for displaced stepping.
350 (maybe_software_singlestep): Do not handle displaced stepping.
352 2009-09-28 Ulrich Weigand <uweigand@de.ibm.com>
354 * eval.c (evaluate_subexp_standard) [OP_OBJC_MSGCALL]: Support
355 platforms that use function descriptors. Prefer to use function
356 pointer types instead of function types.
357 * linespec.c (decode_objc): Support function descriptors. Fully
358 initialize SAL result.
359 * objc-lang.c (find_methods): Support function descriptors.
360 Do not require function symbol to point to text section.
362 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): When calling
363 via a function pointer, use the descriptor it points to.
365 2009-09-28 Jan Kratochvil <jan.kratochvil@redhat.com>
367 Fix ia64 breakpoints in the L-X slot.
368 * ia64-tdep.c (ia64_memory_insert_breakpoint): Extend the comment.
369 New variable shadow_slotnum, use it appropriately instead of slotnum.
370 Move shadow_len initialization before SLOTNUM adjustment, cover now the
371 whole remaining bundle. Error now on breakpoints requested for the
372 slot 2 of L-X bundles. Better sanity check the requested slot 1 of L-X
374 (ia64_memory_remove_breakpoint): New variable shadow_slotnum, use it
375 appropriately instead of slotnum. Warn now on breakpoints requested
376 for the slot 2 of L-X bundles. Better sanity check the requested slot
377 1 of L-X bundles. Update the assertio check of PLACED_SIZE.
378 (ia64_breakpoint_from_pc): New variable shadow_slotnum, use it
379 appropriately instead of slotnum. Move *lenptr initialization before
380 SLOTNUM adjustment, cover now the whole remaining bundle. Error now
381 on breakpoints requested for the slot 2 of L-X bundles. Better sanity
382 check the requested slot 1 of L-X bundles. Simplify the returned
385 2009-09-28 Joel Brobecker <brobecker@adacore.com>
387 * ia64-tdep.c (ia64_memory_insert_breakpoint): Check the slotnum
388 and the type of instruction before deciding which slot to save
389 in the breakpoint shadown contents.
391 2009-09-28 Doug Evans <dje@google.com>
393 * linux-nat.c (status_to_str): Handle TRAP_IS_SYSCALL.
394 (TRAP_REMOVE_SYSCALL_FLAG): New macro.
395 (linux_nat_wait_1): Mask off is-syscall bit in wait status for
396 TRAP_IS_SYSCALL before passing value to caller.
398 2009-09-28 Ulrich Weigand <uweigand@de.ibm.com>
400 * valops.c (value_assign): Respect parent offset when
401 assigning to a bitfield.
403 2009-09-28 Hui Zhu <teawater@gmail.com>
405 * i386-tdep.c (i386_process_record): Remove "0x" that
408 2009-09-27 Ulrich Weigand <uweigand@de.ibm.com>
410 * s390-tdep.c (op_bctr, op_bctgr, op_bct, op1_bctg, op2_bctg,
411 op_bxh, op1_bxhg, op2_bxhg, op_bxle, op1_bxleg, op2_bxleg,
412 op1_brct, op2_brct, op1_brctg, op2_brctg, op_brxh, op1_brxhg,
413 op2_brxhg, op_brxle, op1_brxlg, op2_brxlg): New enum values.
414 (is_rsi, is_rie): New insn format decoder routines.
415 (s390_displaced_step_fixup): New function.
416 (s390_gdbarch_init): Install displaced stepping routines.
418 2009-09-27 Ulrich Weigand <uweigand@de.ibm.com>
420 * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*):
421 Add linux-tdep.o to gdb_target_obs.
422 (s390*-*-*): Likewise.
424 2009-09-27 Don Lee <don.lee@sunplusct.com>
426 * score-tdep.c: Comment out some simulator dependent codes.
427 * score-tdep.h: Delete some simulator dependent macro definitions.
429 2009-09-27 Hui Zhu <teawater@gmail.com>
431 * record.c (record_open): Change "query" to "error".
432 (cmd_record_stop): Change "query" to "printf_unfiltered".
434 2009-09-26 Pierre Muller <muller@ics.u-strasbg.fr>
436 * i386-nat.c (i386_stopped_data_address): Also check that
437 hitted watch register is not vacant.
439 2009-09-25 Tom Tromey <tromey@redhat.com>
442 * language.h (struct language_defn) <la_get_string>: Add
443 'char_type' argument.
444 (LA_GET_STRING): Likewise.
445 (default_get_string, c_get_string): Update.
446 * language.c (default_get_string): Add 'char_type' argument.
447 * c-valprint.c (c_textual_element_type): Rename from
448 textual_element_type. No longer static. Update callers.
449 * c-lang.h (c_textual_element_type): Declare.
450 * c-lang.c (c_get_string): Add 'char_type' argument.
452 2009-09-25 Tom Tromey <tromey@redhat.com>
454 * charset.c (iconv_open): Use UTF-16 and UTF-32, not UCS-2 and
456 (iconv): Rename 'ucs_flag'.
457 (GDB_DEFAULT_TARGET_WIDE_CHARSET): Use UTF-32.
458 * c-lang.c (charset_for_string_type): Use UTF-16 and UTF-32, not
460 (convert_ucn): Use UTF-32.
462 2009-09-25 Nick Roberts <nickrob@snap.net.nz>
464 * mi/gdb-mi.el: Remove file.
466 2009-09-23 Joel Brobecker <brobecker@adacore.com>
468 * record.c (record_open, record_store_registers, record_xfer_partial):
469 Replace calls to nquery by calls to query.
471 2009-09-23 John Wright <john.wright@hp.com>
474 * event-top.c (command_line_handler): Terminate linebuffer before
477 2009-09-22 Joel Brobecker <brobecker@adacore.com>
479 * solib.c (solib_bfd_open): Relax a bit the compatibility check.
481 2009-09-22 Daniel Jacobowitz <dan@codesourcery.com>
483 * source.c (forget_cached_source_info): Clear last_source_visited.
484 (init_last_source_visited): Delete.
485 (directory_command): Do not clear last_source_visited. Call
486 forget_cached_source_info only if required.
487 (unset_substitute_path_command, set_substitute_path_command): Call
488 forget_cached_source_info.
489 * mi/mi-cmd-env.c (mi_cmd_env_dir): Do not call
490 init_last_source_visited.
491 * defs.h (init_last_source_visited): Delete declaration.
493 2009-09-22 Tom Tromey <tromey@redhat.com>
496 * python/py-value.c (valpy_int): Use PyLong_FromLongLong.
497 (valpy_long): Likewise.
499 2009-09-22 Tom Tromey <tromey@redhat.com>
502 * eval.c (evaluate_subexp_standard) <do_call_it>: Handle internal
503 functions in EVAL_AVOID_SIDE_EFFECTS case.
505 2009-09-22 Jie Zhang <jie.zhang@analog.com>
507 * MAINTAINERS: Add myself under Write After Approval.
509 2009-09-22 Pierre Muller <muller@ics.u-strasbg.fr>
511 * windows-nat.c (ctrl_c_handler): Also handle CTRL_BREAK_EVENT.
513 2009-09-18 Keith Seitz <keiths@redhat.com>
515 * cp-support.h (cp_validate_operator): Declare new function.
516 * cp-support.c (cp_validate_operator): New function.
517 * linespec.c (decode_compound): For C++ check for a valid operator.
519 2009-09-21 Keith Seitz <keiths@redhat.com>
521 * c-exp.y (qualified_name): Call CHECK_TYPEDEF before deciding
522 that a type is not an aggregate type.
524 2009-09-21 Jason Orendorff <jason.orendorff@gmail.com>
527 * python/py-function.c (fnpy_init): Use xstrdup.
529 2009-09-21 Jie Zhang <jie.zhang@analog.com>
531 * doc/gdb.texinfo: Escape "{" and "}".
533 2009-09-21 Phil Muldoon <pmuldoon@redhat.com>
537 * c-lang.c (c_printstr): Do not loop past options->print_max when
538 iterating with wchar_iterate.
540 2009-09-21 Phil Muldoon <pmuldoon@redhat.com>
542 * python/py-value.c (valpy_getitem): Test value before allowing
545 2009-09-21 Hui Zhu <teawater@gmail.com>
546 Michael Snyder <msnyder@vmware.com>
548 * amd64-linux-tdep.c (amd64_all_but_ip_registers_record): New
550 (amd64_linux_syscall_record): Call
551 amd64_all_but_ip_registers_record if syscall is
553 (AMD64_LINUX_redzone, AMD64_LINUX_xstate,
554 AMD64_LINUX_frame_size): New macros.
555 (amd64_linux_record_signal): New function.
556 (amd64_linux_init_abi): Call set_gdbarch_process_record_signal.
558 2009-09-21 Hui Zhu <teawater@gmail.com>
559 Michael Snyder <msnyder@vmware.com>
561 * i386-linux-tdep.c (i386_all_but_ip_registers_record): New
563 (i386_linux_intx80_sysenter_record): Call
564 i386_all_but_ip_registers_record if syscall is sys_sigreturn
566 (I386_LINUX_xstate, I386_LINUX_frame_size): New macros.
567 (i386_linux_record_signal): New function.
568 (i386_linux_init_abi): Call set_gdbarch_process_record_signal.
570 2009-09-21 Hui Zhu <teawater@gmail.com>
571 Michael Snyder <msnyder@vmware.com>
573 * record.c (record_end_entry): New struct.
574 (record_type): Add end.
575 (record_arch_list_add_end): Set rec->u.end.sigval to
577 (record_message_args): New struct.
578 (record_message): Call gdbarch_process_record_signal.
579 (do_record_message): Add argument "signal".
580 (record_resume): Ditto.
581 (record_wait): Ditto. Check record_list->u.end.sigval
584 2009-09-21 Hui Zhu <teawater@gmail.com>
585 Michael Snyder <msnyder@vmware.com>
587 * gdbarch.sh (process_record_signal): New interface.
589 2009-09-19 Matt Rice <ratmice@gmail.com> (tiny change)
591 Checked in by Joel Brobecker <brobecker@gnat.com>
592 * varobj.c (varobj_update): Initialize children_changed.
594 2009-09-19 Vladimir Prus <vladimir@codesourcery.com>
596 * mi/mi-cmd-stack.c (list_args_or_locals): Workaround
599 2009-09-19 Vladimir Prus <vladimir@codesourcery.com>
601 * mi/mi-cmds.h (mi_cmd_stack_list_variables): Declare.
602 * mi/mi-cmds.c (mi_cmds): Register -stack-list-variables.
603 * mi/mi-cmd-stack.c (enum what_to_list): New.
604 (list_args_or_locals): Accept what_to_list parameter.
605 Use 'variables' as output name of all are requested.
606 (mi_cmd_stack_list_variables): New.
607 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args): Adjust.
609 2009-09-19 Eli Zaretskii <eliz@gnu.org>
611 * config/djgpp/fnchange.lst: Add missing edits.
613 2009-09-18 Maxim Grigoriev <maxim2405@gmail.com>
615 * xtensa-tdep.c (call0_analyze_prologue): Replace INT_MAX by UNIT_MAX.
617 2009-09-18 Jan Kratochvil <jan.kratochvil@redhat.com>
619 * objfiles.c (free_objfile): Clear SYMFILE_OBJFILE if it is OBJFILE.
620 * rs6000-nat.c (vmap_ldinfo): Only assertion check SYMFILE_OBJFILE now.
621 * symfile.c (syms_from_objfile, symbol_file_clear): Likewise.
623 2009-09-18 Ulrich Weigand <uweigand@de.ibm.com>
625 * rs6000-tdep.c (rs6000_builtin_type_vec128): Add v2_double
628 2009-09-17 Joel Brobecker <brobecker@adacore.com>
630 Fix a build failure on pa-hpux:
631 * gdb_ptrace.h (PT_SYSCALL): Define here if not already defined.
632 * inf-ttrace.c (inf_ttrace_wait): Fix compilation failure
633 introduced after field syscall_id inside struct target_waitstatus
634 has been renamed into syscall_number.
636 2009-09-16 H.J. Lu <hongjiu.lu@intel.com>
639 * Makefile.in (GDB_DATADIR_PATH): Renamed to ...
641 (xml-syscall-install): Updated.
643 2009-09-16 Joel Brobecker <brobecker@adacore.com>
645 GDB 7.0 branch created (branch timestamp: 2009-09-16 19:00 UTC)
646 * version.in: Bump version to 7.0.50.20090916-cvs.
648 2009-09-15 Tom Tromey <tromey@redhat.com>
650 * varobj.h (varobj_update_result_t) <new>: New field.
651 (varobj_get_child_range, varobj_set_child_range): Declare.
652 (varobj_list_children): Update.
653 (varobj_enable_pretty_printing, varobj_has_more)
654 (varobj_pretty_printed_p): Declare.
655 * varobj.c (pretty_printing): New global.
656 (varobj_enable_pretty_printing): New function.
657 (struct varobj_root) <from, to, constructor, child_iter,
658 saved_item>: New fields.
659 (varobj_create): Don't call install_default_visualizer.
660 (instantiate_pretty_printer): Don't use value_copy.
661 (varobj_has_more): New function.
662 (restrict_range): New function.
663 (install_dynamic_child): Likewise.
664 (dynamic_varobj_has_child_method): Likewise.
665 (update_dynamic_varobj_children): Remove 'new_and_unchanged'
666 argument; add 'new', 'unchanged', 'from', and 'to' arguments.
668 (varobj_get_num_children): Call update_dynamic_varobj_children.
669 (varobj_list_children): Add 'from' and 'to' arguments. Ignore
670 result of update_dynamic_varobj_children. Don't call
671 install_default_visualizer. Restrict result range.
672 (varobj_add_child): Don't call install_default_visualizer.
673 (varobj_pretty_printed_p): New function.
674 (install_visualizer): Rewrite. Move earlier in file.
675 (install_default_visualizer): Likewise.
676 (construct_visualizer): New function.
677 (install_new_value_visualizer): Likewise.
678 (install_new_value): Don't call release_value. Special case
679 pretty-printed objects. Use value_incref. Rearrange "changed"
681 (varobj_get_child_range): New function.
682 (varobj_set_child_range): Likewise.
683 (varobj_set_visualizer): Rewrite.
684 (varobj_update): Rewrite pretty-printing logic.
685 (new_variable): Initialize new fields.
686 (free_variable): Destroy new fields.
687 (value_of_root): Copy 'from' and 'to'.
688 (my_value_of_variable): Handle pretty-printers.
689 (value_get_print_value): Rework pretty-printing logic.
690 (cplus_describe_child): Don't use release_value.
691 * mi/mi-cmds.h (mi_cmd_enable_pretty_printing)
692 (mi_cmd_var_set_update_range): Declare.
693 * mi/mi-cmds.c (mi_cmds): Add enable-pretty-printing and
694 var-set-update-range.
695 * mi/mi-cmd-var.c (print_varobj): Update. Emit "dynamic"
697 (mi_cmd_var_create): Emit "has_more" attribute.
698 (mi_cmd_var_set_format): Plug memory leak.
699 (mi_print_value_p): Replace 'type' argument with 'var'. Handle
700 pretty-printed varobjs.
701 (mi_cmd_var_list_children): Accept 'from' and 'to' arguments.
702 Emit "has_more" attribute.
703 (mi_cmd_var_evaluate_expression): Plug memory leak.
704 (mi_cmd_var_assign): Likewise.
705 (varobj_update_one): Likewise. Emit "dynamic", "has_more", and
706 "new_children" attributes.
707 (mi_cmd_enable_pretty_printing): New function.
708 (mi_cmd_var_set_update_range): Likewise.
710 2009-09-15 Doug Evans <dje@google.com>
712 * dwarf2expr.h (dwarf_value_location): Add more comments describing
714 (struct dwarf_stack_value): New struct.
715 (struct dwarf_expr_context): Change type of `stack' from CORE_ADDR*
716 to struct dwarf_stack_value*.
717 (struct dwarf_expr_piece): Move `v.value' into its own struct, v.expr,
718 all uses updated. Add v.expr.in_stack_memory.
719 (dwarf_expr_push): Update declaration.
720 (dwarf_expr_fetch_in_stack_memory): Declare.
721 * dwarf2expr.c (dwarf_expr_grow_stack): Update calculation of
723 (dwarf_expr_push): New arg in_stack_memory, all callers updated.
724 (dwarf_expr_fetch_in_stack_memory): New function.
725 (add_piece): Set in_stack_memory for non-literal values.
726 (execute_stack_op): Allow ops to specify whether the value is on the
728 (execute_stack_op, case DW_OP_fbreg): Mark value as in stack memory.
729 (execute_stack_op, case DW_OP_call_frame_cfa): Ditto.
730 (execute_stack_op, case DW_OP_dup): Copy in_stack_memory flag.
731 (execute_stack_op, cases DW_OP_pick, DW_OP_over): Ditto.
732 (execute_stack_op, cases DW_OP_swap, DW_OP_rot): Update type of
734 * dwarf2loc.c (read_pieced_value): Call read_stack for values known
735 to be on the program's stack.
736 (dwarf2_evaluate_loc_desc, case DWARF_VALUE_MEMORY): Call
737 set_value_stack only for objects known to be in stack memory.
738 * dwarf2-frame.c (execute_stack_op): New arg initial_in_stack_memory,
741 * target.c (memory_xfer_partial): Pass correct length to dcache_update.
743 2009-09-15 Jan Kratochvil <jan.kratochvil@redhat.com>
745 Fix gcc-4.5 HEAD warnings for enum ada_operator.
746 * Makefile.in (HFILES_NO_SRCDIR): Add ada-operator.inc.
747 * ada-lang.h (enum ada_operator): Move it to ...
748 * ada-operator.inc: ... a new file.
749 * expression.h (enum exp_opcode): Include ada-operator.inc.
750 New element OP_UNUSED_LAST. Update comment for OP_EXTENDED0.
752 Fix gcc-4.5 HEAD warnings for GDB_FORM_cached_string.
753 * dwarf2read.c (GDB_FORM_cached_string)
754 (dwarf_form_name <GDB_FORM_cached_string>): Remove.
755 (struct attribute <dwarf_form>): Reduce the bit width.
756 (struct attribute <string_is_canonical>, DW_STRING_IS_CANONICAL): New.
757 (read_attribute_value <DW_FORM_string>)
758 (read_attribute_value <DW_FORM_strp>): Initialize
759 DW_STRING_IS_CANONICAL.
760 (dwarf2_name, dump_die_shallow <DW_FORM_string>)
761 (dump_die_shallow <DW_FORM_strp>): Update the code using former
762 GDB_FORM_cached_string.
764 2009-09-14 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
766 * amd64-linux-tdep.c: Include xml-syscall.h header, define the XML
767 syscall name for the architecture.
768 (amd64_linux_get_syscall_number): New function.
769 (amd64_linux_init_abi): Register the correct functions for syscall
770 catchpoint; set the correct syscall file name.
771 * breakpoint.c: New include: xml-syscall.h.
772 (set_raw_breakpoint_without_location): Setting the parameters
773 for the catch syscall feature.
774 (insert_catch_syscall): New.
775 (remove_catch_syscall): New.
776 (breakpoint_hit_catch_syscall): New.
777 (print_it_catch_syscall): New.
778 (print_one_catch_syscall): New.
779 (print_mention_catch_syscall): New.
780 (catch_syscall_breakpoint_ops): New.
781 (syscall_catchpoint_p): New.
782 (create_catchpoint_without_mention): New.
783 (create_catchpoint): Modified in order to use
784 create_catchpoint_without_mention.
785 (create_syscall_event_catchpoint): New.
786 (clean_up_filters): New.
787 (catch_syscall_split_args): New.
788 (catch_syscall_command_1): New.
789 (delete_breakpoint): Add cleanup for catch syscall.
790 (is_syscall_catchpoint_enabled): New.
791 (catch_syscall_enabled): New.
792 (catching_syscall_number): New.
793 (catch_syscall_completer): New completer function.
794 (add_catch_command): Add the completer function for catchpoints.
795 * breakpoint.h (syscalls_to_be_caught): New vector.
796 (catch_syscall_enabled): New.
797 (catching_syscall_number): New.
798 * gdbarch.c: Regenerated.
799 * gdbarch.h: Regenerated.
800 * gdbarch.sh: Add syscall catchpoint functions and structures.
801 (get_syscall_number): New.
802 (UNKNOWN_SYSCALL): New definition.
803 * i386-linux-nat.c (i386_linux_resume): Select the proper request
804 to be made for ptrace() considering if we are catching syscalls
806 * i386-linux-tdep.c: Include xml-syscall.h header, define the XML
807 syscall name for the architecture.
808 (i386_linux_get_syscall_number): New.
809 (i386_linux_init_abi): Register the correct functions for syscall
810 catchpoint; set the correct syscall file name.
811 * inf-child.c (inf_child_set_syscall_catchpoint): New.
812 (inf_child_target): Assign default values to target_ops.
813 * inf-ptrace.c (inf_ptrace_resume): Select the proper request
814 to be made for ptrace() considering if we are catching syscalls
816 * inferior.h (struct inferior): Included new variables
817 any_syscall_count, syscalls_counts and total_syscalls_count,
818 used to keep track of requested syscall catchpoints.
819 * infrun.c (resume): Add syscall catchpoint.
820 (deal_with_syscall_event): New.
821 (handle_inferior_event): Add syscall entry/return events.
822 (inferior_has_called_syscall): New.
823 * linux-nat.c: Define some helpful variables to track wether we have
824 support for the needed ptrace option.
825 (linux_test_for_tracesysgood): New.
826 (linux_supports_tracesysgood): New.
827 (linux_enable_tracesysgood): New.
828 (linux_enable_event_reporting): Save the current used ptrace
830 (linux_child_post_attach): Calling linux_enable_tracesysgood.
831 (linux_child_post_startup_inferior): Likewise.
832 (linux_child_set_syscall_catchpoint): New function.
833 (linux_handle_extended_wait): Handle the case which the inferior stops
834 because it has called or returned from a syscall.
835 (linux_target_install_ops): Install the necessary functions to handle
837 * linux-nat.h (struct lwp_info): Include syscall_state into the
838 structure, which indicates if we are in a syscall entry or return.
839 * ppc-linux-tdep.c: Include xml-syscall.h header, define the XML
840 syscall filename for the arch.
841 (ppc_linux_get_syscall_number): New.
842 (ppc_linux_init_abi): Register the correct functions for syscall
843 catchpoint; setting the correct name for the XML syscall file.
844 * target.c (update_current_target): Update/copy functions related to
846 (target_waitstatus_to_string): Add syscall catchpoint entry/return
848 * target.h (struct target_waitstatus): Add syscall number.
849 (struct syscall): New struct to hold information about syscalls
851 (struct target_ops): Add ops for syscall catchpoint.
852 (inferior_has_called_syscall): New.
853 (target_set_syscall_catchpoint): New.
854 * xml-support.c (xml_fetch_content_from_file): New function,
855 transferred from xml-tdesc.c.
856 * xml-support.h (xml_fetch_content_from_file): New.
857 * xml-tdesc.c (fetch_xml_from_file): Function removed;
858 transferred to xml-support.c.
859 (file_read_description_xml): Updated to use the new
860 xml_fetch_content_from_file function.
861 * syscalls/gdb-syscalls.dtd: New definition file for syscall's XML
863 * syscalls/amd64-linux.xml: New file containing information about
864 syscalls for GNU/Linux systems that use amd64 architecture.
865 * syscalls/i386-linux.xml: New file containing information about
866 syscalls for GNU/Linux systems that use i386 architecture.
867 * syscalls/ppc-linux.xml: New file containing information about
868 syscalls for GNU/Linux systems that use PPC architecture.
869 * syscalls/ppc64-linux.xml: New file containing information about
870 syscalls for GNU/Linux systems that use PPC64 architecture.
871 * xml-syscall.c: New file containing functions for manipulating
873 * xml-syscall.h: New file, exporting the functions above mentioned.
874 * Makefile.in: Support for relocatable GDB datadir and XML
876 * NEWS: Added information about the catch syscall feature.
878 2009-09-14 Doug Evans <dje@google.com>
880 * target.c (memory_xfer_partial): Only update dcache after we know
883 2009-09-14 Paul Pluzhnikov <ppluzhnikov@google.com>
885 *minsyms.c (lookup_minimal_symbol_by_pc_section_1): Assert non-NULL
887 (lookup_minimal_symbol_by_pc_section): Check for NULL section.
888 (lookup_minimal_symbol_by_pc): Adjust.
890 2009-09-14 Paul Pluzhnikov <ppluzhnikov@google.com>
892 * objfiles.c (qsort_cmp): Remove asserts.
893 (insert_section_p, filter_debuginfo_sections): New function.
894 (filter_overlapping_sections): Likewise.
895 (update_section_map): Adjust.
897 2009-09-13 Daniel Jacobowitz <dan@codesourcery.com>
899 * frame.c (get_frame_id): Default to outer_frame_id if the this_id
900 method does not supply an ID. Assert that the result is not
902 (outer_frame_id): New.
903 (frame_id_p): Accept outer_frame_id.
904 (frame_id_eq): Allow outer_frame_id to be equal to itself.
905 (frame_find_by_id): Revert previous local workarounds.
906 (get_prev_frame_1): Adjust end-of-stack check to test outer_frame_id.
907 * frame.h (null_frame_id, frame_id_p): Update comments.
908 (outer_frame_id): Declare.
909 * infrun.c (handle_inferior_event): Do not treat all steps from the
910 outermost frame as subroutine calls.
912 * libunwind-frame.c (libunwind_frame_this_id): Do not clear THIS_ID.
913 * hppa-tdep.c (hppa_stub_frame_this_id): Likewise.
914 * ia64-tdep.c (ia64_frame_this_id): Likewise.
915 (ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id):
916 Use outer_frame_id instead of null_frame_id.
917 * amd64obsd-tdep.c (amd64obsd_trapframe_cache): Use outer_frame_id.
918 * i386obsd-tdep.c (i386obsd_trapframe_cache): Likewise.
919 * inline-frame.c (inline_frame_this_id): Refuse outer_frame_id.
920 * thread.c (restore_selected_frame): Update comment and remove
923 2009-09-11 Doug Evans <dje@google.com>
925 * dwarf2expr.c (execute_stack_op, case DW_OP_piece): Delete unused
926 local addr_or_regnum.
928 * objfiles.c (struct objfile_data): Delete member cleanup and replace
930 (register_objfile_data_with_cleanup): Delete arg cleanup and replace
931 with save, free. All callers updated.
932 (clear_objfile_data): Replace cleanup loop with separate save and
934 * objfiles.h (register_objfile_data_with_cleanup): Update.
935 * arm-tdep.c (arm_objfile_data_free): Renamed from
936 arm_objfile_data_cleanup, all callers updated.
937 * dwarf2read.c (dwarf2_per_objfile_free): Renamed from
938 dwarf2_per_objfile_cleanup, all callers updated.
939 * python/py-objfile.c (py_free_objfile): Renamed from clean_up_objfile,
941 * python/py-type.c (save_objfile_types): Renamed from
942 clean_up_objfile_types, all callers updated.
944 2009-09-11 Tom Tromey <tromey@redhat.com>
946 * dwarf2loc.c (struct piece_closure) <arch>: New field.
947 (dwarf2_evaluate_loc_desc): Update.
948 (dwarf2_loc_desc_needs_frame): Likewise.
949 (allocate_piece_closure): Initialize new field.
950 (read_pieced_value): Update.
951 (write_pieced_value): Update.
952 (copy_pieced_value_closure): Update.
953 * dwarf2expr.h (enum dwarf_value_location): New.
954 (struct dwarf_expr_context) <in_reg>: Remove.
955 <location, len, data>: New fields.
956 (struct dwarf_expr_piece) <in_reg, value>: Remove.
957 <location, v>: New fields.
958 * dwarf2expr.c (add_piece): Remove in_reg, value arguments.
960 (require_composition): New function.
961 (execute_stack_op): Update.
962 <DW_OP_implicit_value, DW_OP_stack_value>: New cases.
963 <DW_OP_reg0>: Set location, not in_reg.
964 <DW_OP_regx>: Likewise. Use require_composition.
965 <DW_OP_fbreg>: Update.
966 <DW_OP_piece>: Likewise.
967 * dwarf2-frame.c (execute_stack_op): Update.
969 2009-09-10 Anthony Green <green@moxielogic.com>
971 * moxie-tdep.c (moxie_analyze_prologue): Recognize new prologue
974 2009-09-10 Michael Snyder <msnyder@vmware.com>
976 * remote.c (PACKET_bc, PACKET_bs): New enums.
977 (remote_protocol_features): Add ReverseStep, ReverseContinue.
978 (remote_resume): Check for reverse capability.
979 (_initialize_remote): Add packet config for "bs" and "bc" packets.
980 * NEWS (new options): Mention set/show for "bs" and "bc" packets.
982 2009-09-10 Joel Brobecker <brobecker@adacore.com>
984 * top.c (interactive_mode): New static variable.
985 (show_interactive_mode): New function.
986 (input_from_terminal_p): If interactive_mode is not auto, then
987 use that rather than checking the stdin settings.
988 (init_main): Add "set/show interactive-mode" command.
989 * NEWS: Add entry for new "set/show interactive-mode" command.
991 2009-09-10 Joel Brobecker <brobecker@adacore.com>
993 * configure.ac: Fix the names of the python source and object files
994 following the renaming done in an earlier change.
995 * configure: Regenerate.
997 2009-09-08 Joel Brobecker <brobecker@adacore.com>
999 Fix a build failure on AIX.
1000 * rs6000-nat.c (vmap_exec): Rewrite using target_get_section_table
1001 instead of relying on the to_sections/to_section_end target_ops
1002 field, since the latter have been removed in a previous patch.
1004 2009-09-08 Thiago Jung Bauermann <thiago.bauermann@gmail.com>
1006 * Makefile.in (py-cmd.o): Renamed from python-cmd.o. Updated
1008 (py-frame.o): Renamed from python-frame.o. Updated references.
1009 (py-function.o): Renamed from python-function.o. Updated references.
1010 (py-objfile.o): Renamed from python-objfile.o. Updated references.
1011 (py-prettyprint.o): Renamed from python-prettyprint.o. Updated
1013 (py-type.o): Renamed from python-type.o. Updated references.
1014 (py-utils.o): Renamed from python-utils.o. Updated references.
1015 (py-value.o): Renamed from python-value.o. Updated references.
1016 * py-cmd.c: Renamed from python-cmd.c.
1017 * py-frame.c: Renamed from python-frame.c.
1018 * py-function.c: Renamed from python-function.c.
1019 * py-objfile.c: Renamed from python-objfile.c.
1020 * py-prettyprint.c: Renamed from python-prettyprint.c.
1021 * py-type.c: Renamed from python-type.c.
1022 * py-utils.c: Renamed from python-utils.c.
1023 * py-value.c: Renamed from python-value.c.
1025 2009-09-08 Joel Brobecker <brobecker@adacore.com>
1027 Avoid quadratic behavior when computing the value of a register.
1028 * frame.c (frame_stash): New static constant.
1029 (frame_stash_add, frame_stash_find, frame_stash_invalidate):
1031 (get_frame_id): Minor reformatting. Add the frame to the frame stash.
1032 (frame_find_by_id): Search the frame stash first before walking all
1033 frames starting from te current_frame.
1034 (reinit_frame_stash): Add call to frame_stash_invalidate ();
1036 2009-09-08 Joel Brobecker <brobecker@adacore.com>
1038 * block.c (contained_in): Return zero for nested functions.
1039 * blockframe.c (block_innermost_frame): Delete unreferenced local
1042 2009-09-08 Doug Evans <dje@google.com>
1044 * target.c (initialize_targets): Fix thinko in stack_cache_enabled_p.
1046 2009-09-08 Michael Snyder <msnyder@vmware.com>
1048 * amd64-linux-tdep.h (enum amd64_syscall): New enum consts,
1049 to replace literal consts used in amd64-linux-tdep.c
1050 * linux-record.h (enum gdb_syscall): New enum consts, to replace
1051 literal consts used in amd64-linux-tdep.c and linux-record.c.
1052 * amd64-linux-tdep.c (amd64_canonicalize_syscall): New function,
1053 translate from native amd64 Linux syscall id to internal gdb id.
1054 (amd64_linux_syscall_record): Switch statement abstracted out
1055 and replaced with a call to amd64_canonicalize_syscall.
1056 * linux-record.c (record_linux_system_call): Replace literal
1057 consts with enum consts.
1058 * i386-linux-tdep.c (i386_canonicalize_syscall): New function,
1059 trivially translate from native i386 Linux syscalls to gdb syscalls.
1060 (i386_linux_intx80_sysenter_record):
1062 2009-09-08 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1064 * gdb/Makefile.in (check//%): Parse 'config.status --version'
1065 output to recreate the configuration from the testsuite directory,
1066 rather than running 'config.status --recheck' from a different
1067 build directory. Let configure do the recursion rather than
1070 2009-09-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1072 * ia64-tdep.c (ia64_memory_remove_breakpoint): Call do_cleanups
1075 2009-09-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1077 * ia64-tdep.c (ia64_memory_insert_breakpoint)
1078 (ia64_memory_remove_breakpoint): Return immediately if any of memory
1079 reads fail. Do not combine the VAL values.
1081 2009-09-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1083 Fix ia64 shadowing of breakpoints in multiple slots of a single bundle.
1084 * ia64-tdep.c (ia64_memory_insert_breakpoint): New call
1085 of make_show_memory_breakpoints_cleanup with parameter 0. Move the
1086 reading of SHADOW_CONTENTS to this memory state point of code. Update
1087 comment for the memory re-read.
1089 2009-09-07 Michael Snyder <msnyder@vmware.com>
1091 * record.c: Minor comment and white space fix-ups.
1093 2009-09-07 Jan Kratochvil <jan.kratochvil@redhat.com>
1095 * m68k-tdep.c (m68k_gdbarch_init): Allocate TDEP as cleared.
1096 * sparc-tdep.c (sparc32_gdbarch_init): Allocate TDEP as cleared.
1097 Remove explicit clearing of TDEP fields.
1099 2009-09-06 Hui Zhu <teawater@gmail.com>
1101 * i386-tdep.c (i386_record_check_override): Deleted.
1102 (i386_record_lea_modrm): Ditto.
1103 (i386_process_record): Ditto.
1105 2009-09-05 Eli Zaretskii <eliz@gnu.org>
1107 * config/djgpp/djconfig.sh: Fix for Autoconf 2.64.
1108 * config/djgpp/config.sed: Fix for Autoconf 2.64.
1110 2009-09-05 Hui Zhu <teawater@gmail.com>
1112 * i386-tdep.c (i386_record_s): Add orig_addr.
1113 (i386_record_check_override): New function.
1114 (i386_record_lea_modrm): Call i386_record_check_override.
1115 (i386_process_record): Ditto.
1117 2009-09-03 Nathan Froyd <froydnj@codesourcery.com>
1119 * dwarf2loc.c (struct piece_closure): New.
1120 (allocate_piece_closure): New function.
1121 (read_pieced_value): New function.
1122 (write_pieced_value): New function.
1123 (copy_pieced_value_closure): New function.
1124 (free_pieced_value_closure): New function.
1125 (pieced_value_funcs): Define.
1126 (dwarf2_evaluate_loc_desc): Return a computed value for a variable
1127 described with pieces.
1129 2009-09-03 Pierre Muller <muller@ics.u-strasbg.fr>
1130 Richard Earnshaw <rearnsha@arm.com>
1132 * arm-tdep.c (displaced_write_reg): Replace call to abort by call
1135 2009-09-02 Tom Tromey <tromey@redhat.com>
1137 * frame.h (frame_unwinder_is): Declare.
1138 * frame.c (frame_unwinder_is): New function.
1139 * dwarf2loc.c: Include dwarf2-frame.h.
1140 (dwarf_expr_frame_cfa): New function.
1141 (dwarf2_evaluate_loc_desc): Use it.
1142 (needs_frame_frame_cfa): New function.
1143 (dwarf2_loc_desc_needs_frame): Use it.
1144 * dwarf2expr.h (struct dwarf_expr_context) <get_frame_cfa>: New
1146 * dwarf2expr.c (execute_stack_op) <DW_OP_call_frame_cfa>: New
1148 * dwarf2-frame.h (dwarf2_frame_cfa): Declare.
1149 * dwarf2-frame.c (no_get_frame_cfa): New function.
1150 (execute_stack_op): Use it.
1151 (dwarf2_frame_cfa): New function.
1153 2009-09-02 Hui Zhu <teawater@gmail.com>
1155 * record.c (record_resume): Change "signal" to "siggnal".
1157 2009-09-01 Hui Zhu <teawater@gmail.com>
1159 * record.c (record_resume): Change "siggnal" to "signal".
1161 2009-09-01 Hui Zhu <teawater@gmail.com>
1163 * record.c (record_resume_siggnal): Deleted.
1164 (record_resume): Ditto.
1165 (record_wait): Change record_resume_siggnal to
1168 2009-08-31 Jacob Potter <jdpotter@google.com>
1169 Doug Evans <dje@google.com>
1171 Implement TARGET_OBJECT_STACK_MEMORY.
1172 * NEWS: Add note on new "set stack-cache" option.
1173 * corefile.c (read_stack): New function.
1174 * dcache.c (dcache_struct): New member ptid.
1175 (dcache_enable_p): Mark as obsolete.
1176 (show_dcache_enabled_p): Flag option as deprecated.
1177 (dcache_invalidate): Update ptid.
1178 (dcache_invalidate_line): New function.
1179 (dcache_read_line): No longer check cacheable attribute, stack
1180 accesses get cached despite attribute.
1181 (dcache_init): Set ptid.
1182 (dcache_xfer_memory): Flush cache if from different ptid than before.
1183 Update cache after write.
1184 (dcache_update): New function.
1185 (dcache_info): Report ptid.
1186 (_initialize_dcache): Update text for `remotecache' to indicate it
1188 * dcache.h (dcache_update): Declare.
1189 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Mark values on stack with
1191 * frame-unwind.c (frame_unwind_got_memory): Ditto.
1192 * gdbcore.h (read_stack): Declare.
1193 * memattr.c (mem_enable_command): Call target_dcache_invalidate
1194 instead of dcache_invalidate.
1195 (mem_disable_command, mem_delete_command): Ditto.
1196 * target.c (stack_cache_enabled_p_1): New static global.
1197 (stack_cache_enabled_p): New static global.
1198 (set_stack_cache_enabled_p): New function.
1199 (show_stack_cache_enabled_p): New function.
1200 (target_dcache): Make static.
1201 (target_dcache_invalidate): New function.
1202 (target_load, target_resume): Call target_dcache_invalidate
1203 instead of dcache_invalidate.
1204 (memory_xfer_partial): New arg object, all callers updated.
1205 Check for existing inferior before calling dcache routines.
1206 When writing non-TARGET_OBJECT_STACK_MEMORY, notify dcache.
1207 (target_xfer_partial): Call memory_xfer_partial for
1208 TARGET_OBJECT_STACK_MEMORY.
1209 (target_read_stack): New function.
1210 (initialize_targets): Install new option `stack-cache'.
1211 * target.h: Remove #include of dcache.h.
1212 (enum target_object): New value TARGET_OBJECT_STACK_MEMORY.
1213 (target_dcache): Delete.
1214 (target_dcache_invalidate): Declare.
1215 (target_read_stack): Declare.
1216 * top.c (prepare_execute_command): New function.
1217 (execute_command): Call prepare_execute_command
1218 instead of free_all_values.
1219 * top.h (prepare_execute_command): Declare.
1220 * valops.c (get_value_at): New function.
1221 (value_at): Guts moved to get_value_at.
1222 (value_at_lazy): Similarly.
1223 (value_fetch_lazy): Call read_stack for stack values.
1224 * value.c (struct value): New member `stack'.
1225 (value_stack, set_value_stack): New functions.
1226 * value.h (value_stack, set_value_stack): Declare.
1227 * mi/mi-main.c (mi_cmd_execute): Call prepare_execute_command
1228 instead of free_all_values.
1230 2009-08-29 Hui Zhu <teawater@gmail.com>
1232 * i386-tdep.c (i386_process_record): Fix the error of string
1233 ops instructions's handler.
1235 2009-08-28 Doug Evans <dje@google.com>
1237 * top.c (execute_command): Remove redundant comment.
1239 2009-08-28 Daniel Jacobowitz <dan@codesourcery.com>
1243 * value.c (value_primitive_field): Do not save value_offset for
1245 (unpack_bits_as_long): Do not read an entire ULONGEST.
1247 2009-08-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1249 Support constant DW_AT_data_member_location by GCC PR debug/40659.
1251 (dwarf2_add_field <DW_TAG_member> <DW_AT_data_member_location>):
1252 Initialize BYTE_OFFSET to 0 by default. Explicitly check if
1254 (dwarf2_add_field <DW_TAG_inheritance> <DW_AT_data_member_location>)
1255 (read_common_block <DW_AT_data_member_location>): New variable
1256 byte_offset. Fix crash on non-DW_BLOCK ATTR values.
1258 2009-08-28 Hui Zhu <teawater@gmail.com>
1260 * record.c (record_list_release_next): Change the first
1261 record_reg to record_end.
1263 2009-08-27 Doug Evans <dje@google.com>
1265 * value.c (free_all_values): Tweak comment.
1267 * NEWS: Add note on "info sharedlibrary".
1268 Remove note on "set print symbol-loading".
1269 * main.c (captured_main): Pass !batch for from_tty when calling
1270 symbol_file_add_main.
1271 * objfiles.h (objfile_has_partial_symbols): Declare.
1272 (objfile_has_full_symbols): Declare.
1273 * objfiles.c (objfile_has_partial_symbols): New function.
1274 (have_partial_symbols): Use it.
1275 (objfile_has_full_symbols): New function.
1276 (have_full_symbols): Use it.
1277 * solib.c: Include interps.h.
1278 (solib_read_symbols): Back out patch of 2008-07-10.
1279 Add test for info_verbose for symbol loading messages for
1280 consistency with symfile.c.
1281 (info_sharedlibrary_command): Handle optional parameter of regex of
1282 libraries to list. Inform user of libraries without debugging info.
1283 Rewrite to use ui_out routines to format output.
1284 * symfile.c (print_symbol_loading): Delete.
1285 (symbol_file_add_with_addrs_or_offsets): Back out patch of 2008-07-10.
1286 Print "no debugging symbols found" only if from_tty || info_verbose;
1287 and only check file being loaded, not all files.
1288 (reread_symbols): Test file being loaded for whether it has symbols,
1290 (__initialize_symfile): Delete `set print symbol-loading'.
1291 * symfile.h (print_symbol_loading): Delete.
1293 2009-08-27 Jan Kratochvil <jan.kratochvil@redhat.com>
1295 * varobj.c (varobj_create): Error if the specified frame was not found
1298 2009-08-26 Michael Snyder <msnyder@vmware.com>
1300 * i386-tdep.c (i386_process_record): Break out of prefix loop
1301 if not amd64. Otherwise inc/dec instructions are lost.
1303 2009-08-25 Keith Seitz <keiths@redhat.com>
1305 * c-exp.y (yylex): Add cxx_only check for tokentab2 and tokentab3
1307 (tokentab3): Add cxx_only for DOT_STAR.
1309 2009-08-25 Pedro Alves <pedro@codesourcery.com>
1311 * inferior.c (print_inferior): Align columns left. Remove header
1312 for the the "current" column. Rename column "Id" to "Num".
1313 Rename column "PID" to "Description". Print if there's no selected
1316 2009-08-25 Jan Kratochvil <jan.kratochvil@redhat.com>
1318 Fix ia64 start crash when GDB built with -lmcheck.
1319 * ia64-tdep.c (ia64_gdbarch_init): Allocate TDEP as cleared. Remove
1320 specific clearing of TDEP SIGCONTEXT_REGISTER_ADDRESS and
1323 2009-08-24 Keith Seitz <keiths@redhat.com>
1325 * c-exp.y (tokentab3): Add new token, ARROW_STAR. Changed all users.
1326 (tokentab2): Add new token, DOT_STAR. Changed all users.
1328 2009-08-24 Keith Seitz <keiths@redhat.com>
1330 * symtab.c (default_make_symbol_completion_list): Keep
1331 ':', too, so that we can limit searches in namespaces
1334 2009-08-24 Tom Tromey <tromey@redhat.com>
1336 * python/python-value.c (valpy_richcompare): Don't return from
1339 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1341 * CONTRIBUTE: Bump documented Autoconf version.
1342 * configure.ac: Do not substitute datarootdir, htmldir,
1343 pdfdir, docdir. Do not process --with-datarootdir,
1344 --with-htmldir, --with-pdfdir, --with-docdir.
1345 * configure: Regenerate.
1347 * aclocal.m4: Regenerate.
1348 * config.in: Likewise.
1349 * configure: Likewise.
1350 * gnulib/Makefile.in: Likewise.
1352 * configure.ac: Use AC_USE_SYSTEM_EXTENSIONS instead of
1353 AC_GNU_SOURCE, AC_AIX, AC_ISC_POSIX.
1355 2009-08-21 Paul Pluzhnikov <ppluzhnikov@google.com>
1357 * objfiles.h (gdb_bfd_ref): New prototype.
1358 * objfiles.c (gdb_bfd_ref): New function.
1359 (allocate_objfile): Call it.
1360 (gdb_bfd_unref): Adjust assertion.
1361 * solib.c (solib_map_sections): Add reference.
1362 (symbol_add_stub): Don't add reference here.
1363 * symfile.c (reread_symbols): Add reference.
1365 2009-08-21 Ken Werner <ken@linux.vnet.ibm.com>
1366 Doug Evans <dje@google.com>
1368 * jit.c (jit_event_handler): Use paddress to print target addresses.
1369 Wrap printf string in _().
1371 2009-08-21 Doug Evans <dje@google.com>
1373 * jit.c (jit_read_descriptor): New arg gdbarch, all callers updated.
1374 (jit_read_code_entry, jit_register_code): Ditto.
1375 (jit_event_handler): Ditto.
1376 (jit_inferior_init): Renamed from previous jit_inferior_created_hook.
1377 (jit_inferior_created_hook, jit_breakpoint_re_set): New functions.
1378 (jit_inferior_created_observer): Renamed from
1379 jit_inferior_created_hook1, all callers updated.
1380 * jit.h (jit_breakpoint_re_set): Declare.
1381 (jit_event_handler): Update prototype.
1382 * breakpoint.c (breakpoint_re_set): Call jit_breakpoint_re_set instead
1383 of jit_inferior_created_hook.
1385 2009-08-21 Hui Zhu <teawater@gmail.com>
1387 * record.c (record_wait): Change the argument of
1388 record_beneath_to_wait to options.
1390 2009-08-20 Jacob Potter <jdpotter@google.com>
1392 Replace dcache with splay tree.
1393 Remove partially implemented writeback support.
1394 * dcache.c: Include splay-tree.h.
1395 (LINE_SIZE_POWER): Change from 5 to 6.
1396 (DCACHE_SIZE): Change from 64 to 4096.
1397 (ENTRY_INVALID, ENTRY_VALID, ENTRY_DIRTY): Delete.
1398 (state_chars): Delete.
1399 (struct dcache_block): Clean up; remove state and anydirty fields.
1400 (struct dcache_struct): Redefine as a splay tree and linked list.
1401 (last_cache): Make static.
1402 (dcache_invalidate, dcache_hit): Rewrite for new cache structure.
1403 (dcache_read_line, dcache_alloc): Rewrite for new cache structure.
1404 (dcache_write_line): Delete.
1405 (dcache_writeback): Delete.
1406 (dcache_peek_byte): Clean up; remove "invalid" state check.
1407 (dcache_poke_byte): Rewrite for new cache structure; clarify comment.
1408 (dcache_splay_tree_compare): New function.
1409 (dcache_init, dcache_free): Rewrite for new cache structure.
1410 (dcache_xfer_memory): Rewrite for new write-through cache structure.
1411 (dcache_print_line): New function.
1412 (dcache_info): Rewrite for new cache structure.
1413 (_initialize_dcache): Update "info dcache" help text.
1414 * dcache.h (dcache_xfer_memory): Update declaration.
1415 * target.c (memory_xfer_partial): Update calls to dcache_xfer_memory.
1417 2009-08-19 Reid Kleckner <reid@kleckner.net>
1419 Add interface for JIT code generation.
1420 * NEWS: Announce JIT interface.
1421 * Makefile.in (SFILES): Add jit.c.
1422 (HFILES_NO_SRCDIR): Add jit.h.
1423 (COMMON_OBS): Add jit.o.
1426 * breakpoint.h (enum bptype): Add bp_jit_event to enum.
1428 (update_breakpoints_after_exec): Delete jit breakpoints after exec.
1429 (bpstat_what): Update event table for bp_jit_event.
1430 (print_it_typical): Added case for bp_jit_event.
1431 (print_one_breakpoint_location): Added case for bp_jit_event.
1432 (allocate_bp_location): Added case for bp_jit_event.
1433 (mention): Added case for bp_jit_event.
1434 (delete_command): Added case for bp_jit_event.
1435 (breakpoint_re_set_one): Added case for bp_jit_event.
1436 (breakpoint_re_set): Added call to jit_inferior_created_hook.
1437 (create_jit_event_breakpoint): New.
1438 * infrun.c (handle_inferior_event): Add handler for jit event.
1439 (follow_exec): Add call to jit_inferior_created_hook.
1441 2009-08-19 Ulrich Weigand <uweigand@de.ibm.com>
1443 * value.c (enum internalvar_kind): Replace INTERNALVAR_SCALAR by
1444 INTERNALVAR_INTEGER and INTERNALVAR_POINTER.
1445 (union internalvar_data): Replace "scalar" member by "integer"
1447 (value_of_internalvar): Handle INTERNALVAR_INTEGER and
1448 INTERNALVAR_POINTER instead of INTERNALVAR_SCALAR.
1449 (get_internalvar_integer): Likewise.
1450 (set_internalvar): Likewise.
1451 (set_internalvar_integer): Likewise.
1452 (preserve_one_internalvar): Likewise.
1453 (value_from_pointer): Handle typedef'd pointer types.
1455 2009-08-18 Tom Tromey <tromey@redhat.com>
1457 * utils.c (add_internal_problem_command): Free set_doc and
1459 * remote.c (add_packet_config_cmd): Free set_doc and show_doc.
1460 * language.c (add_language): Free language_set_doc.
1462 2009-08-18 Tom Tromey <tromey@redhat.com>
1464 * Makefile.in (ALL_TARGET_OBS): Remove prologue-value.o, solib.o.
1466 2009-08-17 Ulrich Weigand <uweigand@de.ibm.com>
1468 * symfile.c (reread_symbols): Call objfiles_changed *before*
1469 calling clear_symtab_users.
1471 2009-08-17 Michael Snyder <msnyder@vmware.com>
1473 * amd64-tdep.c: Add a frame unwinder for function epilogues.
1474 (amd64_in_function_epilogue_p): New function.
1475 (amd64_epilogue_frame_sniffer): New function.
1476 (amd64_epilogue_frame_cache): New function.
1477 (amd64_epilogue_frame_this_id): New function.
1478 (amd64_epilogue_frame_unwind): New struct frame_unwind.
1479 (amd64_init_abi): Hook the new unwinder.
1481 * amd64-linux-tdep.c (amd64_linux_init_abi): Set gdbarch to use
1482 SVR4 method for skip_trampoline_code.
1484 2009-08-17 Pedro Alves <pedro@codesourcery.com>>
1486 * objfiles.c (objfile_relocate): Relocate the entry point before
1487 relocating the section offsets. Flush the section map before
1488 resetting breakpoints.
1490 2009-08-14 Doug Evans <dje@google.com>
1492 * symfile.c (find_separate_debug_file): Remove double free of
1495 2009-08-14 Pedro Alves <pedro@codesourcery.com>
1497 * top.c (any_thread_of): Delete.
1498 (kill_or_detach): Use any_thread_of_process.
1499 * top.c (print_inferior_quit_action): New.
1500 (quit_confirm): Rewrite to print info about all inferiors.
1501 * target.c (dispose_inferior): New.
1502 (target_preopen): Use it.
1504 2009-08-14 Pedro Alves <pedro@codesourcery.com>
1506 * ui-file.h (ui_file_xstrdup): Mention that the length argument
1508 * ui-file.c (ui_file_xstrdup): Don't dereference LENGTH if it is
1510 * aix-thread.c (aix_thread_extra_thread_info): Pass NULL as length
1511 parameter to ui_file_xstrdup.
1512 * arm-tdep.c (_initialize_arm_tdep): Ditto.
1513 * infrun.c (print_target_wait_results): Ditto.
1514 * language.c (add_language): Ditto.
1515 * linespec.c (cplusplus_error): Ditto.
1516 * remote.c (escape_buffer): Ditto.
1517 * typeprint.c (type_to_string): Ditto.
1518 * utils.c (error_stream): Ditto.
1519 * varobj.c (value_get_print_value): Ditto.
1520 * xtensa-tdep.c (xtensa_verify_config): Replace `dummy' local with
1521 `length' local. Pass it to ui_file_xstrdup, and avoid an strlen
1523 * gdbarch.sh (verify_gdbarch): Ditto.
1524 * gdbarch.c: Regenerate.
1525 * cli/cli-setshow.c (do_setshow_command): Pass NULL as length
1526 parameter to ui_file_xstrdup.
1527 * python/python-frame.c (frapy_str): Ditto.
1528 * python/python-type.c (typy_str): Use the length local instead of
1530 * python/python-value.c (valpy_str): Pass NULL as length parameter
1533 2009-08-13 Doug Evans <dje@google.com>
1535 * utils.c (gnu_debuglink_crc32): Store crc32_table as unsigned int
1536 instead of unsigned long.
1538 2009-08-13 Tom Tromey <tromey@redhat.com>
1540 * varobj.c (update_dynamic_varobj_children): Don't use
1542 * value.h: (preserve_one_value): Declare.
1543 (value_prepend_to_list, value_remove_from_list): Remove.
1544 * value.c (preserve_one_value): No longer static.
1545 (preserve_values): Call preserve_python_values.
1546 (value_prepend_to_list): Remove.
1547 (value_remove_from_list): Remove.
1548 * python/python.h (values_in_python): Don't declare.
1549 (preserve_python_values): Declare.
1550 * python/python-value.c (values_in_python): Change type. Move
1552 (struct value_object): Add struct tag.
1553 <next, prev>: New fields.
1554 (valpy_dealloc): Update.
1555 (note_value): New function.
1556 (valpy_new): Use value_incref, note_value.
1557 (preserve_python_values): New function.
1558 (valpy_positive): Don't use value_copy.
1559 (value_to_value_object): Use value_incref, note_value.
1560 (convert_value_from_python): Update comment.
1562 2009-08-13 Pedro Alves <pedro@codesourcery.com>
1564 * remote.c (remote_pid_to_str): If printing a process id and we
1565 don't know what the remote pid could be, output "Remote target";
1566 otherwise, use normal_pid_to_str.
1568 2009-08-13 Tom Tromey <tromey@redhat.com>
1570 * language.h (longest_raw_hex_string): Remove unused declaration.
1572 2009-08-13 Pedro Alves <pedro@codesourcery.com>
1576 * language.c (language, type, range, case_sensitive): Make const.
1577 (show_language_command): Don't call deprecated_show_value_hack.
1578 Special case "auto".
1579 (set_language_command): An unrecognized language is now an
1580 internal error instead of a user error. Don't call set_lang_str.
1581 (show_type_command): Don't call deprecated_show_value_hack.
1582 Special case "auto". Use warning.
1583 (set_type_command): An unrecognized type is now an internal error
1584 instead of a user error. Output type check mismatch with language
1585 here. Don't call set_type_str.
1586 (show_range_command): Don't call deprecated_show_value_hack.
1587 Special case "auto". Use warning.
1588 (set_range_command): An unrecognized range check is now an
1589 internal error instead of a warning. Output range check mismatch
1590 with language here. Don't call set_range_str.
1591 (show_case_command): Don't call deprecated_show_value_hack.
1592 Special case "auto". Use warning.
1593 (set_case_command): Don't call set_case_str. An unrecognized case
1594 check is now an internal error instead of a warning. Output range
1595 check mismatch with language here. Don't call set_case_str.
1596 (set_type_range_case): Don't call set_type_str, set_range_str or
1598 (set_lang_str, set_type_str, set_range_str, set_case_str): Delete.
1599 (add_language): Install or reinstall the "set language" command
1600 here, and make it an enum command. Build the enumeration and the
1601 help string from the current list of known languages.
1602 (_initialize_language): Don't install "set language" here. Make
1603 "set check type", "set check range" and "set case-sensitive" enum
1604 commands. Register the "auto" "local" and "unknown" languages in
1607 2009-08-13 Pedro Alves <pedro@codesourcery.com>
1609 Revert 2009-08-07 changes for PR gdb/8869:
1611 * language.c (set_language_command): Strip whitespace.
1612 (set_type_command): Likewise.
1613 (set_range_command): Likewise.
1615 * language.c (language_completer): New function.
1616 (range_or_type_completer): New function.
1617 (case_completer): New function.
1618 (_initialize_language): Set completers.
1619 * cli/cli-decode.c (add_setshow_string_cmd): Return the "set"
1621 (add_setshow_string_noescape_cmd): Likewise.
1622 (add_setshow_integer_cmd): Likewise.
1623 (add_setshow_uinteger_cmd): Likewise.
1624 (add_setshow_zinteger_cmd): Likewise.
1625 (add_setshow_zuinteger_cmd): Likewise.
1626 * command.h (add_setshow_string_cmd,
1627 add_setshow_string_noescape_cmd, add_setshow_uinteger_cmd,
1628 add_setshow_zinteger_cmd, add_setshow_zuinteger_cmd): Update.
1630 2009-08-12 Michael Snyder <msnyder@vmware.com>
1632 * remote.c (remote_add_inferior): Remove unused local.
1633 (remote_add_thread): Ditto.
1635 (remote_current_thread): Ditto.
1636 (remote_stop_ns): Ditto.
1637 (remote_parse_stop_reply): Ditto.
1638 (remote_get_pending_stop_replies): Ditto.
1639 (remote_wait_ns): Ditto.
1640 (remote_wait_as): Ditto.
1641 (send_g_packet): Ditto.
1642 (remote_fetch_registers): Ditto.
1643 (store_register_using_P): Ditto.
1644 (remote_store_registers): Ditto.
1645 (remote_remove_breakpoint): Ditto.
1646 (remote_write_qxfer): Ditto.
1647 (remote_read_qxfer): Ditto.
1649 2009-08-11 Tom Tromey <tromey@redhat.com>
1651 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Make a cleanup.
1652 (dwarf2_loc_desc_needs_frame): Likewise.
1653 * dwarf2expr.h (make_cleanup_free_dwarf_expr_context): Declare.
1654 * dwarf2expr.c (free_dwarf_expr_context_cleanup): New function.
1655 (make_cleanup_free_dwarf_expr_context): Likewise.
1656 * dwarf2-frame.c (execute_stack_op): Make a cleanup.
1658 2009-08-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1660 * objfiles.c (gdb_bfd_unref): Use the bfd_usrdata accessor.
1661 * solib.c (symbol_add_stub): Likewise.
1662 * symfile.c (symfile_bfd_open): Assert BFD_USRDATA is NULL.
1664 2009-08-10 Paul Pluzhnikov <ppluzhnikov@google.com>
1666 * objfiles.c (qsort_cmp): Remove assert.
1667 (preferred_obj_section): New function.
1668 (update_section_map): Filter duplicates.
1670 2009-08-10 Tristan Gingold <gingold@adacore.com>
1672 * solib-darwin.c (find_program_interpreter): Simplify the code by
1673 looking up for the load_dylinker command instead of reading the
1674 corresponding (but deprecated) section.
1675 (darwin_solib_create_inferior_hook): Adjust: do not free the
1678 2009-08-10 Tristan Gingold <gingold@adacore.com>
1680 * i386-darwin-tdep.c (i386_m128_p): New function.
1681 (i386_darwin_arg_type_alignment): Ditto.
1682 (i386_darwin_push_dummy_call): Ditto.
1683 (i386_darwin_init_abi): Define Darwin specific push_dummy_call.
1684 Adjust long_double size. Adjust pc offset in setjump buffer.
1686 2009-08-10 Hui Zhu <teawater@gmail.com>
1688 Add Linux AMD64 process record support.
1690 * amd64-linux-tdep.c (amd64_linux_record_tdep): New variable.
1691 This struct has the argument for the function
1692 "record_linux_system_call".
1693 (amd64_linux_syscall_record): New function. Parse the
1694 system call instruction and call function
1695 "record_linux_system_call" to record execute log.
1696 (i386_linux_init_abi): Initialize "amd64_linux_record_tdep".
1697 Set "amd64_linux_syscall_record" to "i386_syscall_record".
1699 2009-08-10 Hui Zhu <teawater@gmail.com>
1701 Add process record Linux system call 64 bits support.
1703 * linux-record.h (linux_record_tdep): Add size_pointer,
1704 size_size_t, size_iovec and arg6. Change the values of
1705 size_int, size_long and size_ulong to
1706 gdbarch_int_bit (gdbarch) / TARGET_CHAR_BIT,
1707 gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT,
1708 gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT.
1709 * i386-linux-tdep.c (i386_linux_init_abi): Ditto.
1710 (i386_linux_intx80_sysenter_record): Add a check for system
1712 * linux-record.c (record_linux_system_call): Make this
1713 function support 64 bits.
1715 2009-08-10 Hui Zhu <teawater@gmail.com>
1717 Add AMD64 process record instruction set support.
1719 * i386-tdep.h (gdbarch_tdep): Add record_regmap for registers
1720 because the AMD64's registers order in GDB is not same with
1722 Add i386_syscall_record to be the syscall function handle
1724 (record_i386_regnum): Number for record_regmap.
1725 * i386-tdep.c (OT_QUAD): For 64 bits.
1726 (i386_record_s): Add rex_x, rex_b, rip_offset and
1727 popl_esp_hack for AMD64 instruction set. And regmap for
1729 (i386_record_lea_modrm_addr): Support AMD64 instruction set
1731 (i386_record_lea_modrm): Ditto.
1732 (i386_record_push): New function. Record the execution log
1734 (I386_RECORD_ARCH_LIST_ADD_REG): New macro to record the
1736 (i386_process_record): Support AMD64 instruction set.
1737 * amd64-tdep.c (amd64_record_regmap): For record_regmap.
1738 (amd64_init_abi): Set amd64_record_regmap to record_regmap.
1740 2009-08-08 Pedro Alves <pedro@codesourcery.com>
1742 * bfd-target.c (struct target_bfd_data): New.
1743 (target_bfd_xfer_partial): Adjust to get at the section table from
1745 (target_bfd_get_section_table): Ditto.
1746 (target_bfd_xclose): Ditto. Get the bfd pointer from the
1747 target_bfd_data structure, from the section table.
1748 (target_bfd_reopen): Store a struct target_bfd_data in the
1749 target_ops to_data field, instead of a target_section_table.
1751 2009-08-08 Aleksandar Ristovski <aristovski@qnx.com>
1752 Hui Zhu <teawater@gmail.com>
1754 * record.c (record_store_registers): Remove unused variable.
1756 2009-08-07 Tom Tromey <tromey@redhat.com>
1758 * language.c (set_language_command): Strip whitespace.
1759 (set_type_command): Likewise.
1760 (set_range_command): Likewise.
1762 2009-08-07 Tom Tromey <tromey@redhat.com>
1765 * language.c (language_completer): New function.
1766 (range_or_type_completer): New function.
1767 (case_completer): New function.
1768 (_initialize_language): Set completers.
1769 * cli/cli-decode.c (add_setshow_string_cmd): Return the "set"
1771 (add_setshow_string_noescape_cmd): Likewise.
1772 (add_setshow_integer_cmd): Likewise.
1773 (add_setshow_uinteger_cmd): Likewise.
1774 (add_setshow_zinteger_cmd): Likewise.
1775 (add_setshow_zuinteger_cmd): Likewise.
1776 * command.h (add_setshow_string_cmd,
1777 add_setshow_string_noescape_cmd, add_setshow_uinteger_cmd,
1778 add_setshow_zinteger_cmd, add_setshow_zuinteger_cmd): Update.
1780 2009-08-06 Paul Pluzhnikov <ppluzhnikov@google.com>
1783 * dwarf2-frame.c (qsort_fde_cmp): Use stable sort.
1785 2009-08-06 Paul Pluzhnikov <ppluzhnikov@google.com>
1787 * dwarf2-frame.c (struct dwarf2_cie): Remove 'next'.
1788 (struct dwarf2_cie_table): New.
1789 (struct dwarf2_fde): Remove 'next'.
1790 (struct dwarf2_fde_table): New.
1791 (struct comp_unit): Remove 'cie'.
1792 (bsearch_cie_cmp, bsearch_fde_cmp): New function.
1793 (find_cie, dwarf2_frame_find_fde): Use bsearch.
1794 (add_cie, add_fde): Use array instead of linked list.
1795 (decode_frame_entry, decode_frame_entry_1): New parameters.
1796 (qsort_fde_cmp): New function.
1797 (dwarf2_build_frame_info): Adjust.
1799 2009-08-06 Don Lee <don.lee@sunplusct.com>
1801 * score-tdep.c: Support a new Sunplus CT S+core variant, S+core 3.
1802 * score-tdep.h: Ditto.
1804 * configure.tgt: Test do we have a simulator.
1805 * MAINTAINERS: Add myself under target score
1807 2009-08-06 Nick Roberts <nickrob@snap.net.nz>
1809 * utils.c (defaulted_query): Don't ask for confirmation if server
1812 2009-08-05 Tom Tromey <tromey@redhat.com>
1814 * spu-tdep.h (SPUADDR_SPU): Cast result to int.
1816 2009-08-04 Paul Pluzhnikov <ppluzhnikov@google.com>
1818 * objfiles.h (OBJF_KEEPBFD): Delete.
1819 (gdb_bfd_unref): New prototype.
1820 * objfiles.c (gdb_bfd_unref): New function.
1821 (free_objfile): Call gdb_bfd_unref.
1822 * solib.c (free_so): Likewise.
1823 (symbol_add_stub): Set refcount.
1825 2009-08-04 Hui Zhu <teawater@gmail.com>
1826 Michael Snyder <msnyder@vmware.com>
1828 * record.c (record_mem_entry): New field 'mem_entry_not_accessible'.
1829 (record_arch_list_add_mem): Initialize 'mem_entry_not_accessible'.
1830 (record_wait): Set 'mem_entry_not_accessible' flag if target
1831 memory not readable. Don't try to change target memory if
1832 'mem_entry_not_accessible' is set.
1834 2009-08-03 Richard Guenther <rguenther@suse.de>
1835 Jan Kratochvil <jan.kratochvil@redhat.com>
1837 Fix memory corruption on reread of file through a symbolic link.
1838 * symfile.c (find_separate_debug_file): Initialize CANON_NAME earlier.
1839 Allocate DEBUGFILE with length based on CANON_NAME. Free CANON_NAME on
1840 all the return paths.
1842 2009-08-03 Jim Ingham <jingham@apple.com>
1843 Vladimir Prus <vladimir@codesourcery.com>
1845 Implement -break-commands
1847 * breakpoint.c (get_breakpoint, breakpoint_set_commands): New.
1848 (commands_command): Use breakpoint_set_commands.
1849 * breakpoint.h (get_breakpoint, breakpoint_set_commands): Declare.
1851 * mi/mi-cmds.h (mi_cmd_break_commands): New.
1852 * mi/mi-cmds.c: Register -break-commands.
1853 * mi/mi-cmd-break.c (mi_cmd_break_commands, mi_read_next_line)
1854 (mi_command_line_array, mi_command_line_array_cnt)
1855 (mi_command_line_array_ptr): New.
1857 2009-08-03 Jim Ingham <jingham@apple.com>
1858 Vladimir Prus <vladimir@codesourcery.com>
1860 Refactor reading of commands
1862 * defs.h (read_command_lines_1): Declare.
1863 * cli/cli-script.c (read_next_line): Only return string,
1865 (process_next_line): New, extracted from read_next_line.
1866 (recurse_read_control_structure): Take a function pointer to the
1868 (get_command_line) Pass the read_next_line as reader function
1869 into recurse_read_control_structure.
1870 (read_command_lines_1): New, extracted from...
1871 (read_command_lines): ...here.
1873 2009-07-31 Kazu Hirata <kazu@codesourcery.com>
1875 * procfs.c (proc_set_current_signal): Populate mysinfo before
1877 (proc_clear_current_signal): Likewise.
1878 (proc_set_watchpoint): Populate pwatch before copying it to arg.
1880 2009-07-31 Michael Snyder <msnyder@vmware.com>
1882 * remote.c (store_register_using_P): Call putpkt and getpkt
1883 directly instead of calling remote_send.
1884 (store_registers_using_G): Ditto.
1885 (fetch_register_using_p): Ditto.
1887 * remote.c (store_register_using_P): Make error msg more verbose.
1888 (store_registers_using_G): Ditto.
1889 (fetch_register_using_p): Ditto.
1891 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1893 * spu-tdep.c: Include "infcall.h".
1894 (spu_address_class_type_flags): New function.
1895 (spu_address_class_type_flags_to_name): Likewise.
1896 (spu_address_class_name_to_type_flags): Likewise.
1897 (spu_pointer_to_address): Handle __ea pointers.
1898 (spu_auto_flush_cache_p): New static variable.
1899 (spu_objfile_from_frame): New function.
1900 (flush_ea_cache, spu_attach_normal_stop): Likewise.
1901 (show_spu_auto_flush_cache): Likewise.
1902 (spu_gdbarch_init): Install address class handlers.
1903 (_initialize_spu_tdep): Attach to normal_stop observer.
1904 Install "set spu auto-flush-cache" / "show spu auto-flush-cache"
1907 * NEWS: Mention "set/show spu auto-flush-cache" commands.
1909 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1911 * spu-tdep.c: Include "block.h".
1912 (setspucmdlist, showspucmdlist): New static variables.
1913 (spu_stop_on_load_p): Likewise.
1914 (spu_catch_start): New function.
1915 (show_spu_command, set_spu_command): New functions.
1916 (show_spu_stop_on_load): Likewise.
1917 (_initialize_spu_tdep): Attach spu_catch_start to new_objfile observer.
1918 Install "set spu" / "show spu" prefix command handler.
1919 Install "set spu stop-on-load" / "show spu stop-on-load" command.
1921 * NEWS: Mention "set/show spu stop-on-load" commands.
1923 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1925 * ppc-linux-tdep.c: Include "solib.h", "solist.h", "exceptions.h",
1926 "arch-utils.h", and "spu-tdep.h".
1927 (spu_context_objfile, spe_context_lm_addr, spe_context_offset):
1928 New static variables.
1929 (spe_context_cache_ptid, spe_context_cache_address): Likewise.
1930 (ppc_linux_spe_context_lookup): New function.
1931 (ppc_linux_spe_context_inferior_created): Likewise.
1932 (ppc_linux_spe_context_solib_loaded): Likewise.
1933 (ppc_linux_spe_context_solib_unloaded): Likewise.
1934 (ppc_linux_spe_context): Likewise.
1935 (struct ppu2spu_cache, struct ppu2spu_data): New data types.
1936 (ppu2spu_prev_arch, ppu2spu_this_id, ppu2spu_prev_register,
1937 ppu2spu_unwind_register, ppu2spu_sniffer,
1938 ppu2spu_dealloc_cache): New functions.
1939 (ppu2spu_unwind): New static variable.
1940 (ppc_linux_init_abi): Install cross-architecture unwinder.
1941 (_initialize_ppc_linux_tdep): Attach to observers.
1943 * spu-tdep.c (struct spu2ppu_cache): New data type.
1944 (spu2ppu_prev_arch, spu2ppu_this_id, spu2ppu_prev_register,
1945 spu2ppu_sniffer, spu2ppu_dealloc_cache): New functions.
1946 (spu2ppu_unwind): New static variable.
1947 (spu_gdbarch_init): Install cross-architecture unwinder.
1949 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1951 * target.h (enum strata): New value arch_stratum.
1952 * target.c (target_require_runnable): Skip arch_stratum targets.
1954 * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
1955 solib-spu.o and spu-multiarch.o to gdb_target_obs.
1956 * Makefile.in (ALL_TARGET_OBS): Add solib-spu.o and spu-multiarch.o.
1957 (ALLDEPFILES): Add solib-spu.c and spu-multiarch.c.
1959 * solib-spu.c: New file.
1960 * solib-spu.h: New file.
1961 * spu-multiarch.c: New file.
1963 * spu-tdep.h (SPUADDR, SPUADDR_SPU, SPUADDR_ADDR): New macros.
1965 * spu-tdep.c (struct gdbarch_tdep): New member id.
1966 (spu_gdbarch_id): New function.
1967 (spu_lslr): New function.
1969 (spu_address_to_pointer): New function.
1970 (spu_pointer_to_address): Support SPU ID address encoding. Use
1971 spu_gdbarch_id and spu_lslr.
1972 (spu_integer_to_address): Likewise.
1973 (spu_frame_unwind_cache): Update for encoded addresses.
1974 (spu_unwind_pc, spu_unwind_sp): Likewise.
1975 (spu_read_pc, spu_write_pc): Likewise.
1976 (spu_push_dummy_call): Likewise.
1977 (spu_software_single_step): Likewise.
1978 (spu_get_longjmp_target): Likewise.
1979 (spu_overlay_update_osect): Likewise.
1981 (spu_dis_asm_print_address): New function.
1982 (gdb_print_insn_spu): Likewise.
1984 (spu_gdbarch_init): Store SPU ID in tdep structure.
1985 Install spu_address_to_pointer and gdb_print_insn_spu.
1987 * ppc-linux-tdep.c: Include "observer.h", "auxv.h", "elf/common.h"
1989 (ppc_linux_entry_point_addr): New static variable.
1990 (ppc_linux_inferior_created): New function.
1991 (ppc_linux_displaced_step_location): Likewise.
1992 (ppc_linux_init_abi): Enable Cell/B.E. support if supported
1994 (_initialize_ppc_linux_tdep): Attach to inferior_created observer.
1996 * NEWS: Mention multi-architecture and Cell/B.E. debugging
1999 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
2001 * linux-nat.c: Include <sys/vfs.h>.
2002 (SPUFS_MAGIC): Define.
2003 (spu_enumerate_spu_ids): New function.
2004 (linux_proc_xfer_spu): New function.
2005 (linux_xfer_partial): Handle TARGET_OBJECT_SPU.
2007 (iterate_over_spus): New function.
2008 (struct linux_spu_corefile_data): New data type.
2009 (linux_spu_corefile_callback): New function.
2010 (linux_spu_make_corefile_notes): New function.
2011 (linux_nat_make_corefile_notes): Call it.
2013 * corelow.c (struct spuid_list): New data type.
2014 (add_to_spuid_list): New function.
2015 (core_xfer_partial): Handle TARGET_OBJECT_SPU.
2017 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
2019 * features/Makefile: Allow sub-platform specific expedite settings.
2020 (WHICH): Add rs6000/powerpc-cell32l and rs6000/powerpc-cell64l.
2021 (rs6000/powerpc-cell32l-expedite): Define.
2022 (rs6000/powerpc-cell64l-expedite): Likewise.
2023 * features/rs6000/powerpc-cell32l.xml: New file.
2024 * features/rs6000/powerpc-cell64l.xml: New file.
2025 * features/rs6000/powerpc-cell32l.c: New generated file.
2026 * features/rs6000/powerpc-cell64l.c: New generated file.
2028 * regformats/rs6000/powerpc-cell32l.dat: New generated file.
2029 * regformats/rs6000/powerpc-cell64l.dat: New generated file.
2031 * config/djgpp/fnchange.lst: Add mappings for new files.
2033 * ppc-linux-tdep.h (tdesc_powerpc_cell32l): Add prototype.
2034 (tdesc_powerpc_cell64l): Likewise.
2035 * ppc-linux-tdep.c: Include "features/rs6000/powerpc-cell32l.c"
2036 and "features/rs6000/powerpc-cell64l.c".
2037 (_initialize_ppc_linux_tdep): Initialize target descriptions.
2038 (ppc_linux_spu_section): New function.
2039 (ppc_linux_core_read_description): Detect Cell/B.E. core files.
2040 * ppc-linux-nat.c (PPC_FEATURE_CELL): Define.
2041 (ppc_linux_read_description): Detect Cell/B.E. architecture.
2043 * rs6000-tdep.c (rs6000_gdbarch_init): Do not trust BFD wordsize
2044 if exec file is not PowerPC architecture.
2046 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
2048 * features/gdb-target.dtd (target): Accept optional
2049 <compatible> elements.
2050 (compatible): Define element.
2052 * target-descriptions.h (tdesc_compatible_p): New.
2053 (tdesc_add_compatible): New.
2054 * target-descriptions.c (arch_p): New VEC_P type.
2055 (struct target_desc): New member compatible.
2056 (free_target_description): Handle it.
2057 (maint_print_c_tdesc_cmd): Likewise.
2058 (tdesc_compatible_p): New function.
2059 (tdesc_add_compatible): New function.
2061 * xml-tdesc.c (tdesc_end_compatible): New function.
2062 (target_children): Handle <compatible> element.
2064 * arch-utils.c (choose_architecture_for_target): Accept target
2065 description instead of BFD architecture as input. Query target
2066 description for compatible architectures.
2067 (gdbarch_info_fill): Update call.
2069 * NEWS: Mention <compatible> element of target descriptions.
2071 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
2073 * breakpoint.c (remove_breakpoints): If removing one breakpoint
2074 location fails, still continue to remove other locations.
2075 (remove_hw_watchpoints): Likewise.
2076 (detach_breakpoints): Likewise.
2078 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
2080 * breakpoint.h (enum enable_state): Add bp_startup_disabled.
2081 (disable_breakpoints_before_startup): Add prototype.
2082 (enable_breakpoints_after_startup): Likewise.
2084 * breakpoint.c (executing_startup): New static variable.
2085 (describe_other_breakpoints): Handle bp_startup_disabled.
2086 (check_duplicates_for): Likewise.
2087 (disable_breakpoints_before_startup): New function.
2088 (enable_breakpoints_after_startup): New function.
2089 (create_breakpoint): Mark new breakpoints as bp_startup_disabled
2090 if executing_startup flag is true.
2091 (break_command_really): Likewise.
2092 (breakpoint_re_set_one): Skip bp_startup_disabled breakpoints.
2094 2009-07-31 Julian Brown <julian@codesourcery.com>
2096 * arm-linux-tdep.c (arch-utils.h, inferior.h, gdbthread.h, symfile.h):
2098 (arm_linux_cleanup_svc, arm_linux_copy_svc): New.
2099 (cleanup_kernel_helper_return, arm_catch_kernel_helper_return): New.
2100 (arm_linux_displaced_step_copy_insn): New.
2101 (arm_linux_init_abi): Initialise displaced stepping callbacks.
2102 * arm-tdep.c (DISPLACED_STEPPING_ARCH_VERSION): New macro.
2104 (displaced_read_reg, displaced_in_arm_mode, branch_write_pc)
2105 (bx_write_pc, load_write_pc, alu_write_pc, displaced_write_reg)
2106 (insn_references_pc, copy_unmodified, cleanup_preload, copy_preload)
2107 (copy_preload_reg, cleanup_copro_load_store, copy_copro_load_store)
2108 (cleanup_branch, copy_b_bl_blx, copy_bx_blx_reg, cleanup_alu_imm)
2109 (copy_alu_imm, cleanup_alu_reg, copy_alu_reg)
2110 (cleanup_alu_shifted_reg, copy_alu_shifted_reg, cleanup_load)
2111 (cleanup_store, copy_extra_ld_st, copy_ldr_str_ldrb_strb)
2112 (cleanup_block_load_all, cleanup_block_store_pc)
2113 (cleanup_block_load_pc, copy_block_xfer, cleanup_svc, copy_svc)
2114 (copy_undef, copy_unpred): New.
2115 (decode_misc_memhint_neon, decode_unconditional)
2116 (decode_miscellaneous, decode_dp_misc, decode_ld_st_word_ubyte)
2117 (decode_media, decode_b_bl_ldmstm, decode_ext_reg_ld_st)
2118 (decode_svc_copro, arm_process_displaced_insn)
2119 (arm_displaced_init_closure, arm_displaced_step_copy_insn)
2120 (arm_displaced_step_fixup): New.
2121 (arm_gdbarch_init): Initialise max insn length field.
2122 * arm-tdep.h (DISPLACED_TEMPS, DISPLACED_MODIFIED_INSNS): New
2124 (displaced_step_closure, pc_write_style): New.
2125 (arm_displaced_init_closure, displaced_read_reg)
2126 (arm_process_displaced_insn, arm_displaced_init_closure)
2127 (displaced_read_reg, displaced_write_reg, arm_displaced_step_copy_insn)
2128 (arm_displaced_step_fixup): Add prototypes.
2130 2009-07-31 Pedro Alves <pedro@codesourcery.com>
2131 Julian Brown <julian@codesourcery.com>
2133 * infrun.c (displaced_step_fixup): If this is a software
2134 single-stepping arch, don't tell the target to single-step.
2135 (maybe_software_singlestep): Return 0 if we're using displaced
2137 (resume): If this is a software single-stepping arch, and
2138 displaced-stepping is enabled, use it for all single-step
2141 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
2143 * Makefile.in (ACLOCAL, ACLOCAL_AMFLAGS, aclocal_m4_deps)
2144 (AUTOCONF, configure_deps, AUTOHEADER): New variables.
2145 ($(srcdir)/aclocal.m4, $(srcdir)/configure, $(srcdir)/config.in)
2146 (am--refresh): New rules.
2147 (stamp-h, config.status): List config.in and configure including
2149 * aclocal.m4: Regenerate.
2150 * configure: Regenerate.
2152 2009-07-30 Thomas Schwinge <tschwinge@gnu.org>
2154 * gnu-nat.c (add_task_commands) <stopped>: Register the correct
2157 2009-07-30 H.J. Lu <hongjiu.lu@intel.com>
2159 * ia64-tdep.c (ia64_access_reg): Correct paddress.
2161 2009-07-30 Jan Kratochvil <jan.kratochvil@redhat.com>
2163 Replace public function varobj_list by all_root_varobjs iterator.
2164 * mi/mi-cmd-var.c (struct mi_cmd_var_update, mi_cmd_var_update_iter):
2166 (mi_cmd_var_update): Replace the varobj_list call by all_root_varobjs.
2167 Remove the variables rootlist, cr. New variable data.
2168 * varobj.c (rootcount, varobj_list): Remove.
2169 (install_variable, uninstall_variable): Remove the rootcount updates.
2170 (all_root_varobjs): New function.
2171 (varobj_invalidate): Use the all_root_varobjs call. Move the code to...
2172 (varobj_invalidate_iter): ... a new function.
2173 * varobj.h (varobj_list): Remove the prototype.
2174 (all_root_varobjs): New prototype.
2176 2009-07-29 Paul Pluzhnikov <ppluzhnikov@google.com>
2179 * dbxread.c (read_dbx_symtab): Reduce stack use.
2181 2009-07-29 Jan Kratochvil <jan.kratochvil@redhat.com>
2183 Fix gcc-4.5 HEAD warnings.
2184 * cp-name-parser.y (%union <typed_val_int>, %token GLOBAL)
2185 (GLOBAL_CONSTRUCTORS, GLOBAL_DESTRUCTORS, demangler_special <GLOBAL>):
2187 (yylex <"global constructors keyed to ">)
2188 (yylex <"global destructors keyed to ">): Base it on DEMANGLER_SPECIAL.
2189 (cp_comp_to_string): Remove variables str, prefix and buf. Remove the
2190 GLOBAL_DESTRUCTORS and GLOBAL_CONSTRUCTORS handling.
2191 (cp_print): Remove the GLOBAL_DESTRUCTORS and GLOBAL_CONSTRUCTORS
2194 2009-07-28 Daniel Jacobowitz <dan@codesourcery.com>
2196 * NEWS: Mention ARM VFP support.
2197 * target-descriptions.c (tdesc_register_type): Make public.
2198 (tdesc_unnumbered_register): New function.
2199 (tdesc_register_reggroup_p): Allow missing
2200 pseudo_register_reggroup_p.
2201 * target-descriptions.h (tdesc_register_type): Declare.
2202 (tdesc_unnumbered_register): Declare.
2203 * arm-tdep.c (arm_neon_quad_read, arm_neon_quad_write): New functions.
2204 (arm_push_dummy_call): Use arm_neon_quad_write.
2205 (arm_neon_double_type, arm_neon_quad_type): New functions.
2206 (arm_register_type): Handle VFP and NEON registers. Override the
2207 types of double-precision registers for NEON. Disable FPA registers
2208 if they are not present.
2209 (arm_dwarf_reg_to_regnum): Add current VFP and NEON register numbers.
2210 (arm_return_value): Use arm_neon_quad_write and arm_neon_quad_read.
2211 (arm_register_name): Handle VFP single and NEON quad registers.
2212 (arm_pseudo_read, arm_pseudo_write): New functions.
2213 (arm_gdbarch_init): Check for VFP and NEON in the target description.
2214 Assign numbers to double-precision registers. Register VFP and NEON
2215 pseudo registers. Remove a shadowed "i" variable.
2216 * arm-tdep.h (enum gdb_regnum): Add ARM_D0_REGNUM and
2218 (struct gdbarch_tdep): Add have_neon_pseudos, have_neon,
2219 have_vfp_registers, have_vfp_pseudos, neon_double_type,
2222 * features/Makefile: Make expedite settings only architecture
2224 (WHICH): Add new ARM descriptions.
2225 * features/arm-with-neon.xml, features/arm-with-vfpv2.c,
2226 features/arm-with-vfpv3.c, features/arm-vfpv2.xml,
2227 features/arm-vfpv3.xml, features/arm-with-vfpv2.xml,
2228 features/arm-with-vfpv3.xml, features/arm-with-neon.c: New files.
2229 * regformats/arm-with-neon.dat, regformats/arm-with-vfpv2.dat,
2230 regformats/arm-with-vfpv3.dat: Generate.
2232 2009-07-28 Daniel Jacobowitz <dan@codesourcery.com>
2234 * infrun.c (handle_inferior_event): Clear trap_expected after
2235 stepping past a single-step breakpoint.
2237 2009-07-28 Joseph Myers <joseph@codesourcery.com>
2239 * arm-tdep.c (enum arm_vfp_cprc_base_type,
2240 arm_vfp_cprc_unit_length, arm_vfp_cprc_reg_char,
2241 arm_vfp_cprc_sub_candidate, arm_vfp_call_candidate,
2242 arm_vfp_abi_for_function): New.
2243 (arm_push_dummy_call): Handle VFP ABI.
2244 (arm_extract_return_value, arm_store_return_value): Handle
2246 (arm_return_value): Handle VFP ABI.
2247 (arm_gdbarch_init): Default fp_model based on Tag_ABI_VFP_args for
2250 2009-07-28 Daniel Jacobowitz <dan@codesourcery.com>
2252 * arch-utils.c (displaced_step_at_entry_point): Do not call
2253 gdbarch_convert_from_func_ptr_addr.
2254 * cris-tdep.c: Remove outdated comment.
2255 * infcall.c (call_function_by_hand): Do not call
2256 gdbarch_convert_from_func_ptr_addr after entry_point_address.
2257 * objfiles.c (entry_point_address): Call both
2258 gdbarch_convert_from_func_ptr_addr and
2259 gdbarch_addr_bits_remove.
2261 2009-07-28 Aleksandar Ristovski <aristovski@qnx.com>
2263 * nto-tdep.c (nto_thread_state_str): New array.
2264 (nto_extra_thread_info): New function definition.
2265 * nto-tdep.h (gdbthread.h): New include.
2266 (private_thread_info): New struct.
2267 (nto_extra_thread_info): New declaration.
2268 * nto-procfs.c (procfs_thread_alive): Properly check if
2269 thread is still alive.
2270 (update_thread_private_data_name, update_thread_private_data): New
2271 function definition.
2272 (procfs_find_new_threads): Fetch thread private data.
2273 (init_procfs_ops): Register to_extra_thread_info.
2275 2009-07-25 Pedro Alves <pedro@codesourcery.com>
2277 * stack.c (backtrace_command_1): Remove dead check of NULL current
2280 2009-07-23 Keith Seitz <keiths@redhat.com>
2282 * source.c (forward_search_command): Don't fclose the stream,
2283 just run the cleanups.
2284 (reverse_search_command): Likewise.
2286 2009-07-23 Paul Pluzhnikov <ppluzhnikov@google.com>
2288 * symtab.c (search_symbols): Add QUIT.
2290 2009-07-22 Paul Pluzhnikov <ppluzhnikov@google.com>
2292 * symfile.c (symbol_file_add_with_addrs_or_offsets): Call observer.
2294 2009-07-22 Paul Pluzhnikov <ppluzhnikov@google.com>
2296 * objfiles.h (objfiles_changed): New prototype.
2297 * objfiles.c (objfiles_updated_p): Rename to objfiles_changed_p.
2298 (allocate_objfile, free_objfile): Must rebuild section map.
2299 (objfile_relocate): Likewise.
2300 (update_section_map, find_pc_section): Adjust.
2301 (set_objfiles_updated_on_exe_change): Remove.
2302 (set_objfiles_updated_on_solib_activity): Remove.
2303 (_initialize_objfiles): Remove.
2304 (objfiles_changed): New function.
2305 * symfile.c (reread_symbols): Call objfiles_changed.
2307 2009-07-22 Hui Zhu <teawater@gmail.com>
2309 * record.c (record_xfer_partial): Call error When nquery
2312 2009-07-21 Paul Pluzhnikov <ppluzhnikov@google.com>
2314 * objfiles.c (objfiles_updated_p): New variable.
2315 (qsort_cmp, bsearch_cmp, update_section_map): New function.
2316 (find_pc_section): Use bsearch.
2317 (set_objfiles_updated_on_exe_change): New function.
2318 (set_objfiles_updated_on_solib_activity): New function.
2319 (_initialize_objfiles): New function.
2321 2009-07-21 Michael Eager <eager@eagercon.com>
2323 * features/rs6000/powerpc-405.xml: New.
2324 * rs6000-tdep.c: Add include & initialize for
2325 powerpc-405.c, add 405 to variants.
2326 * features/rs6000/powerpc-405.c: Generate.
2328 2009-07-21 Paul Pluzhnikov <ppluzhnikov@google.com>
2330 * utils.c (internal_vproblem): Always print failure message.
2332 2009-07-21 Daniel Jacobowitz <dan@codesourcery.com>
2333 Vladimir Prus <vladimir@codesourcery.com>
2335 * valops.c (value_fetch_lazy): Handle bitfields explicitly.
2336 (value_assign): Remove unnecessary FIXME. Honor the container
2337 type of bitfields if possible.
2338 * value.c (struct value): Add parent field.
2339 (value_parent): New function.
2340 (value_free): Free the parent also.
2341 (value_copy): Copy the parent also.
2342 (value_primitive_field): Do not read the contents of a lazy
2343 value to create a child bitfield value. Set bitpos and offset
2344 according to the container type if possible.
2345 (unpack_bits_as_long): Rename from unpack_field_as_long. Take
2346 field_type, bitpos, and bitsize instead of type and fieldno.
2347 (unpack_field_as_long): Use unpack_bits_as_long.
2348 * value.h (value_parent, unpack_bits_as_long): New prototypes.
2350 2009-07-21 Daniel Jacobowitz <dan@codesourcery.com>
2352 * value.c (struct value): Add reference_count field.
2353 (allocate_value_lazy): Initialize reference_count.
2354 (value_incref): New function.
2355 (value_free): Check the reference count.
2356 * value.h (value_incref): New prototype.
2358 2009-07-20 Marc Khouzam <marc.khouzam@ericsson.com>
2360 * utils.c (defaulted_query): Update comment and remove dead code.
2362 2009-07-20 Doug Evans <dje@google.com>
2364 Add support for "comdat types" from DWARF4.
2365 * dwarf2read.c (dwarf2_per_objfile): New member types,
2367 (TYPES_SECTION): New macro.
2368 (dwarf2_per_cu_data): Change size of length field from 30 bits
2369 to 29 bits. New member from_debug_types.
2370 (signatured_type): New struct.
2371 (struct attribute): New union member signatured_type.
2372 (DW_SIGNATURED_TYPE): New macro.
2373 (dwarf2_attr_no_follow): New function.
2374 (read_type_unit_scope): New function.
2375 (follow_die_ref_or_sig, follow_die_sig): New functions.
2376 (dwarf2_locate_sectoins): Handle .debug_types.
2377 (dwarf2_build_psymtabs): Read .debug_types.
2378 (read_type_comp_unit_head): New function.
2379 (hash_type_signature, eq_type_signature): New functions.
2380 (create_debug_types_hash_table): New function.
2381 (lookup_signatured_type): New function.
2382 (process_psymtab_comp_unit): Handle type units too.
2383 (process_type_comp_unit, build_type_psymtabs): New functions.
2384 (dwarf2_build_psymtabs_hard): Call build_type_psymtabs.
2385 (load_partial_comp_unit): Assert not called for a type unit.
2386 (skip_one_die): Handle DW_FORM_sig8.
2387 (queue_comp_unit): Don't call load_full_comp_unit here, or
2388 update read_in_chain.
2389 (psymtab_to_symtab_1): Call read_signatured_type_at_offset for
2390 type units, or load_full_comp_unit for comp units after
2391 queue_comp_unit returns.
2392 (load_full_comp_unit): Assert not called for type units.
2393 (load_full_comp_unit): Update read_in_chain here.
2394 (process_die): Handle DW_TAG_type_unit.
2395 (read_structure_type): Look for signatured types.
2396 (read_enumeration_type): Ditto.
2397 (init_cu_die_reader): Handle .debug_types.
2398 (read_comp_unit): Assert hash not computed yet.
2399 (read_die_and_children): Expand debugging printf to handle .debug_types.
2400 (read_partial_die): Handle DW_TAG_type_unit:
2401 (find_patial_die): Handle .debug_types.
2402 (read_attribute_value): Handle DW_FORM_sig8.
2403 (die_type): Call follow_die_ref_or_sig instead of follow_die_ref.
2404 (die_containing_type): Ditto.
2405 (dwarf_tag_name): Handle DW_TAG_type_unit.
2406 (dwarf_attr_name): Handle DW_AT_signature.
2407 (dwarf_form_name): Handle DW_FORM_sec_offset, DW_FORM_exprloc,
2408 DW_FORM_flag_present, DW_FORM_sig8.
2409 (dump_die_shallow): Handlel DW_FORM_sig8.
2410 (maybe_queue_comp_unit): Change return type to int from void.
2411 All callers updated.
2412 (follow_die_ref): Handle .debug_types.
2413 (lookup_signatured_type_at_offset): New function.
2414 (read_signatured_type_at_offset): New function.
2415 (read_signatured_type): New function.
2417 2009-07-20 Ulrich Weigand <uweigand@de.ibm.com>
2419 * arch-utils.c (gdbarch_info_fill): Only reference GDB_OSABI_DEFAULT
2420 if the macro is defined.
2422 2009-07-20 Pedro Alves <pedro@codesourcery.com>
2424 * features/gdb-target.dtd (target): Accept an optional 'osabi'
2426 (osabi): Define element.
2427 * features/mips-linux.xml (target): Add an osabi subelement set to
2429 * regformats/regdat.sh (xmlarch, xmlosabi): New variables. Don't
2430 write the architecture into $xmltarget. Store it in $xmlarch.
2431 Handle the 'osabi' type. Handle outputting the osabi element of
2432 the target description.
2433 * regformats/reg-x86-64-linux.dat (osabi): Set to GNU/Linux.
2434 * regformats/reg-i386-linux.dat (osabi): Set to GNU/Linux.
2436 * target-descriptions.h (tdesc_osabi, set_tdesc_osabi): Declare.
2437 * target-descriptions.c (struct target_desc) <osabi>: New field.
2438 (tdesc_osabi): New function.
2439 (set_tdesc_osabi): New function.
2440 * xml-tdesc.c: Include osabi.h.
2441 (tdesc_end_osabi): New.
2442 (target_children): Parse "osabi" elements.
2443 * arch-utils.c (gdbarch_info_fill): Try to get the osabi from the
2444 target description if the user didn't override it or it is not
2445 extractable from the bfd. If that still fails, fallback to the
2446 configured in default.
2447 * osabi.h (osabi_from_tdesc_string): Declare.
2448 * osabi.c (osabi_from_tdesc_string): New.
2449 (gdbarch_lookup_osabi): Return GDB_OSABI_UNKNOWN instead of
2452 * NEWS: Mention that target descriptions can now describe the
2455 2009-07-20 Mike Frysinger <vapier@gentoo.org>
2457 * configure.ac (AC_CHECK_FUNCS): Check for pipe.
2458 * config.in, configure: Regenerate.
2459 * tui/tui-io.c (TUI_USE_PIPE_FOR_READLINE): Define if HAVE_PIPE.
2461 2009-07-20 Pedro Alves <pedro@codesourcery.com>
2463 * gnu-nat.c: Include "inf-child.h".
2464 (gnu_mourn_inferior): Use the passed in target_ops
2465 instead of the gnu_ops global.
2466 (gnu_create_inferior): Inline `attach_to_child', use the passed in
2467 target_ops instead of the gnu_ops global.
2468 (gnu_can_run): Delete.
2469 (gnu_attach): Use the passed in target_ops instead of the gnu_ops
2471 (gnu_detach): Ditto.
2472 (gnu_prepare_to_store, gnu_open): Delete.
2473 (gnu_store_registers, gnu_fetch_registers): Delete declarations.
2475 (init_gnu_ops): Delete.
2477 (_initialize_gnu_nat): Don't call init_gnu_ops or add_target here.
2478 * gnu-nat.h (gnu_target): Declare.
2479 * i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Make
2481 (_initialize_i386gnu_nat): New.
2483 2009-07-20 Ulrich Weigand <uweigand@de.ibm.com>
2485 * dwarf2loc.c (find_location_expression): Retrieve beginning and
2486 ending address offsets in location list entries as integers,
2489 2009-07-20 Ulrich Weigand <uweigand@de.ibm.com>
2491 * infrun.c (wait_for_inferior): Invalidate registers and overlay
2492 cache every time before calling target_wait.
2493 (handle_inferior_event): Make static. Always reset waiton_ptid.
2494 Never call registers_changed.
2495 (prepare_to_wait): Do not invaliate registers or overlay cache
2496 (moved to wait_for_inferior). Do not reset waiton_ptid (moved
2497 to handle_inferior_event).
2498 (fetch_inferior_event): Remove check for always-true condition.
2500 2009-07-20 Thomas Schwinge <tschwinge@gnu.org>
2502 * i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Adjust to
2503 2009-02-23 target_ops changes.
2505 2009-07-18 Michael Snyder <msnyder@vmware.com>
2507 * infrun.c (handle_inferior_event): Remove an execution_direction
2508 check in the "check for subroutine calls" test, and add some
2509 additional handling for reverse-stepping through shared libraries.
2511 2009-07-18 Anthony Green <green@moxielogic.com>
2513 * moxie-tdep.c (moxie_analyze_prologue): Take gdbarch as last
2514 parameter instead of frame_info.
2515 (moxie_frame_cache): Call moxie_analyze_prologue with different
2518 2009-07-17 Ulrich Weigand <uweigand@de.ibm.com>
2520 * solib.c (solib_bfd_open): Do not call ops->bfd_open.
2521 (solib_map_sections): Call ops->bfd_open instead of solib_bfd_open.
2522 * solib-frv.c (_initialize_frv_solib): Initialize bfd_open member.
2523 * solib-irix.c (_initialize_irix_solib): Likewise.
2524 * solib-null.c (_initialize_null_solib): Likewise.
2525 * solib-osf.c (_initialize_osf_solib): Likewise.
2526 * solib-pa64.c (_initialize_pa64_solib): Likewise.
2527 * solib-som.c (_initialize_som_solib): Likewise.
2528 * solib-sunos.c (_initialize_sunos_solib): Likewise.
2529 * solib-svr4.c (_initialize_svr4_solib): Likewise.
2530 * solib-target.c (_initialize_solib_target): Likewise.
2532 2009-07-17 Ulrich Weigand <uweigand@de.ibm.com>
2534 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Respect mixed_mode flag.
2536 2009-07-16 Doug Evans <dje@google.com>
2538 * linux-thread.db.c (try_thread_db_load_1): Tweak comment.
2540 2007-07-16 Paul Pluzhnikov <ppluzhnikov@google.com>
2542 * linux-thread-db.c (thread_db_find_new_threads_silently):
2544 (try_thread_db_load_1): Call it.
2546 2009-07-15 Doug Evans <dje@google.com>
2548 Code reorg in preparation for adding comdat types support.
2549 * dwarf2read.c (struct die_reader_specs): New struct.
2550 (locate_pdi_sibling): New arg buffer. All callers updated.
2551 (load_partial_dies, read_partial_die): Ditto.
2552 (read_8_bytes): Change return type to ULONGEST.
2553 (read_comp_unit): Delete arg abfd. All callers updated.
2554 (read_die_and_children_1): Delete args abfd, cu. New arg reader.
2555 All callers updated.
2556 (read_die_and_children, read_die_and_siblings): Ditto.
2557 (read_full_die): Ditto. Move closer to callers.
2558 (skip_one_die): New arg buffer. All callers updated.
2559 (load_full_comp_unit): Change return type to void. All callers
2561 (partial_read_comp_unit_head): New args buffer, buffer_size.
2562 All callers updated.
2563 (process_psymtab_comp_unit): New function, split out from
2564 dwarf2_build_psymtabs_hard.
2565 (dwarf2_build_psymtabs_hard): Call it.
2566 (load_partial_comp_unit): Renamed from load_comp_unit.
2567 All callers updated.
2568 (skip_children): New arg buffer. All callers updated.
2569 (init_cu_die_reader): New function.
2570 (is_ref_attr): New function.
2571 (dwarf2_get_ref_die_offset): Call it.
2572 (alloc_one_comp_unit): New function.
2574 2009-07-14 Stan Shebs <stan@codesourcery.com>
2576 * MAINTAINERS (Global Maintainers): Add Doug Evans.
2578 2009-07-14 Stan Shebs <stan@codesourcery.com>
2580 Conditional tracepoints.
2581 * ax-gdb.h (gen_eval_for_expr): Declare.
2582 * ax-gdb.c (gen_expr): Generate bytecodes for BINOP_EQUAL
2583 and other comparisons.
2584 (gen_eval_for_expr): New function.
2585 (agent_eval_command): New maintenance command.
2586 (_initialize_ax_gdb): Define the command.
2587 * remote.c (struct remote_state): New field cond_tracepoints.
2588 (PACKET_ConditionalTracepoints): New packet config type.
2589 (remote_cond_tracepoint_feature): New function.
2590 (remote_protocol_features): Add ConditionalTracepoints.
2591 (remote_supports_cond_tracepoints): New function.
2592 (_initialize_remote): Add ConditionalTracepoints.
2593 * tracepoint.c (download_tracepoint): Add conditional.
2594 * NEWS: Mention conditional tracepoints.
2596 2009-07-14 Ulrich Weigand <uweigand@de.ibm.com>
2598 * objfiles.c (objfile_relocate): Do not relocate the same
2599 BLOCKVECTOR_MAP address map multiple times.
2601 2009-07-14 Ulrich Weigand <uweigand@de.ibm.com>
2603 * remote.c (process_stop_reply): Access expedited target registers
2606 2009-07-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2608 Fix memory access from signed 32bit inferior registers on 64bit GDB.
2609 * linux-nat.c (linux_xfer_partial <TARGET_OBJECT_MEMORY>): New variable
2610 addr_bit. Mask OFFSET by the ADDR_BIT width.
2612 2009-07-13 Anthony Green <green@moxielogic.com>
2614 * moxie-tdep.c (moxie_gdbarch_init): Call
2615 set_gdbarch_process_record.
2616 (moxie_process_record): New.
2617 (moxie_process_readu): New.
2619 2009-07-12 Michael Snyder <msnyder@vmware.com>
2621 * i386-tdep.c: Add a frame unwinder for function epilogues.
2622 (i386_in_function_epilogue_p): New function.
2623 (i386_epilogue_frame_sniffer): New function.
2624 (i386_epilogue_frame_cache): New function.
2625 (i386_epilogue_frame_this_id): New function.
2626 (i386_epilogue_frame_unwind): New struct frame_unwind.
2627 (i386_gdbarch_init): Hook the new unwinder.
2629 2009-07-11 Hui Zhu <teawater@gmail.com>
2631 * cli/cli-cmds.c (disassemble_command): Add a new modifier /r
2632 to "disassemble" command to print the raw instructions in hex as
2633 well as in symbolic form.
2634 (init_cli_cmds): Ditto.
2635 (print_disassembly): Change "mixed" to "flags" to translate
2636 the behavior of disassemble.
2637 (disassemble_current_function): Ditto.
2638 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
2639 * stack.c (gdb_disassembly_stub): Ditto.
2640 * disasm.c (do_mixed_source_and_assembly): Ditto.
2641 (do_mixed_source_and_assembly): Ditto.
2642 (do_assembly_only): Ditto.
2643 (gdb_disassembly): Ditto.
2644 (dump_insns): print the raw instructions in hex as well as in
2645 symbolic form if DISASSEMBLY_RAW_INSN and flags is true.
2646 * disasm.h (DISASSEMBLY_SOURCE): Include source code with the
2647 assembly if it and flags is true.
2648 (DISASSEMBLY_RAW_INSN): Include the raw instructions in hex with
2649 the assembly if it and flags is true.
2650 (gdb_disassembly): Update extern.
2651 * NEWS: Document disassemble/r support.
2653 2009-07-10 Tom Tromey <tromey@redhat.com>
2655 * dwarf2-frame.c: Include dwarf2.h, not elf/dwarf2.h.
2656 * dwarf2expr.c: Likewise.
2657 * dwarf2loc.c: Likewise.
2658 * dwarf2read.c: Likewise.
2659 * sh-tdep.c: Likewise.
2660 * xtensa-tdep.c: Likewise.
2662 2009-07-10 Jan Kratochvil <jan.kratochvil@redhat.com>
2665 * mi/mi-cmd-var.c (mi_cmd_var_update): Remove variable nv. Move
2666 variables var, rootlist and cr to their local sub-block. Move the
2667 make_cleanup_ui_out_tuple_begin_end, make_cleanup_ui_out_list_begin_end
2668 and do_cleanups calls to the common base block. Remove the zero NV
2671 2009-07-10 Phil Muldoon <pmuldoon@redhat.com>
2673 * python/python-internal.h (apply_varobj_pretty_printer): Update
2675 (python_string_to_target_python_string): Add definition.
2676 * python/python-utils.c (unicode_to_encoded_python_string)
2677 (unicode_to_target_python_string)
2678 (python_string_to_target_python_string): New Functions.
2679 * python/python-prettyprint.c (pretty_print_one_value): Likewise.
2680 (print_string_repr): Refactor to logic to account for PyObject
2682 (apply_varobj_pretty_printer): Likewise.
2683 * python/python-value.c (valpy_string): Parse length keyword. Use
2684 length keyword in LA_GET_STRING.
2685 * varobj.c (value_get_print_value): Refactor logic to account for
2686 PyObject returned strings.
2687 * c-lang.c (c_get_string): If the length parameter is specified,
2688 use that. Return value in characters. Update comments.
2689 * language.h: Update c_get_string prototype comments.
2691 2009-07-09 Doug Evans <dje@google.com>
2693 * i386-tdep.c (i386_displaced_step_fixup): Fix order of arguments
2694 to read_memory_unsigned_integer.
2696 2009-07-09 Jan Kratochvil <jan.kratochvil@redhat.com>
2698 Report error on inaccessible memory.
2699 * cli/cli-dump.c: Include gdbcore.h.
2700 (dump_memory_to_file): Call read_memory instead of target_read_memory.
2702 2009-07-09 Hui Zhu <teawater@gmail.com>
2704 * solib.c (solib_bfd_open): Output a warning if solib's
2705 architecture is not compatible with inferior's architecture.
2707 2009-07-09 Ulrich Weigand <uweigand@de.ibm.com>
2708 Jan Kratochvil <jan.kratochvil@redhat.com>
2710 * target.h (struct target_ops <to_thread_architecture>): Describe it.
2711 (target_thread_architecture): Refer to to_thread_architecture.
2713 2009-07-08 Pierre Muller <muller@ics.u-strasbg.fr>
2715 * cli/cli-cmds.c (init_cli_cmds): Add "inf" alias for "info" command.
2717 2009-07-07 Ulrich Weigand <uweigand@de.ibm.com>
2719 * tui/tui-stack.c (tui_make_status_line): Display PC as ?? if unknown.
2721 2009-07-07 Pierre Muller <muller@ics.u-strasbg.fr>
2723 * breakpoint.c (set_raw_breakpoint): Remove static modifier.
2725 2009-07-07 Tom Tromey <tromey@redhat.com>
2727 * c-lang.c (convert_octal): Only allow 3 octal digits.
2728 (print_wchar): Prefer 3-digit octal form. Fall back to hex if
2730 * c-exp.y (c_parse_escape): Only allow 3 octal digits.
2732 2009-07-07 Paul Pluzhnikov <ppluzhnikov@google.com>
2734 * python/python-value.c (valpy_getitem): Remove incorrect assert.
2736 2009-07-07 Paul Pluzhnikov <ppluzhnikov@google.com>
2738 * python/python-value.c (valpy_getitem): Don't return from TRY_CATCH.
2740 2009-07-07 Sami Wagiaalla <swagiaal@redhat.com>
2742 * cp-support.h (struct using_direct): Rename members inner and
2743 outer to import_src, and import_dest respectively.
2744 * cp-namespace.c (cp_add_using_directive): Update.
2745 (cp_add_using): Update.
2746 (cp_copy_usings): Update.
2747 (cp_lookup_symbol_namespace): Update.
2748 (cp_scan_for_anonymous_namespaces): Update.
2749 * cp-support.c (make_symbol_overload_list_using): Update.
2750 * cp-support.h (cp_add_using_directive, cp_add_using): Rename
2751 arguments from inner and outer to src and dest respectively.
2752 * cp-namespace.c (cp_add_using_directive): Ditto.
2753 (cp_add_using): Ditto.
2755 2009-07-07 Jan Kratochvil <jan.kratochvil@redhat.com>
2757 * mi/mi-cmd-var.c (mi_cmd_var_update): Replace a while loop by for loop.
2758 * varobj.c (varobj_invalidate): Replace a while loop by for loop.
2760 2009-07-07 Vladimir Prus <vladimir@codesourcery.com>
2762 Fix hang in floating varobjs.
2764 * varobj.c (varobj_invalidate): Advance to next
2765 element when processing floating varobj.
2767 2009-07-07 Vladimir Prus <vladimir@codesourcery.com>
2769 * varobj.c: Remove unnecessary include.
2771 2009-07-07 Tristan Gingold <gingold@adacore.com>
2773 * config/i386/darwin.mh (NATDEPFILES): Remove excServer.o.
2774 Remove excServer.c target. Remove _all target.
2775 * darwin.defs: Removed.
2777 2009-07-06 Aleksandar Ristovski <aristovski@qnx.com>
2779 * configure.tgt (i[34567]86-*-nto*): Add build_gdbserver=yes.
2781 2009-07-06 Jan Kratochvil <jan.kratochvil@redhat.com>
2783 * source.c (find_and_open_source): Remove the `objfile' parameter.
2784 Update the function comment.
2785 (open_source_file, symtab_to_fullname, psymtab_to_fullname): Update the
2786 find_and_open_source callers.
2788 2009-07-05 Pedro Alves <pedro@codesourcery.com>
2790 * coff-pe-read.c (read_pe_exported_syms): Recognize
2791 "pe-arm-wince-little" and "pei-arm-wince-little" bfd targets as PE
2794 2009-07-05 Pedro Alves <pedro@codesourcery.com>
2796 * arm-wince-tdep.c (arm_wince_skip_main_prologue): New.
2797 (arm_wince_init_abi): Register it as gdbarch_skip_main_prologue
2800 2009-06-29 Tristan Gingold <gingold@adacore.com>
2802 * i386-darwin-tdep.c (amd64_darwin_thread_state_reg_offset)
2803 (amd64_darwin_thread_state_num_regs)
2804 (amd64_darwin_sigcontext_addr, x86_darwin_init_abi_64): Moved to
2806 (_initialize_i386_darwin_tdep): Remove 64 bits parts.
2807 (darwin_dwarf_signal_frame_p): Make public.
2808 * amd64-darwin-tdep.c: New file with most chunks from
2810 * i386-darwin-tdep.h: Add a prototype for darwin_dwarf_signal_frame_p.
2811 (amd64_darwin_thread_state_reg_offset)
2812 (amd64_darwin_thread_state_num_regs): Moved to amd64-darwin-tdep.h
2813 * amd64-darwin-tdep.h: New file.
2814 * i386-darwin-nat.c: Only includes amd64-nat.h and amd64-darwin-tdep.h
2815 if BFD64 is defined.
2816 (i386_darwin_fetch_inferior_registers): Add #ifdef BFD64/#endif around
2818 (i386_darwin_store_inferior_registers): Ditto.
2819 (darwin_set_sstep): Ditto.
2820 (darwin_complete_target): Ditto.
2821 (amd64_darwin_sstep_at_sigreturn): Ditto.
2822 * configure.tgt: Create a separate entry for x86_64-*-darwin.
2823 Add 64 bits support for i386-*-darwin if --enable-64-bit-bfd.
2824 * Makefile.in (ALLDEPFILES): Add amd64-darwin-tdep.c, darwin-nat.c,
2825 i386-darwin-tdep.c i386-darwin-nat.c
2826 (ALL_64_TARGET_OBS): Add amd64-darwin-tdep.o
2828 2009-07-02 Pedro Alves <pedro@codesourcery.com>
2830 * linux-fork.c (forks_exist_p): Drop unnecessary extern.
2831 (add_fork, linux_fork_killall, linux_fork_mourn_inferior)
2832 (linux_fork_detach): Ditto.
2833 (delete_fork_command): Rename to ...
2834 (delete_checkpoint_command): ... this.
2835 (detach_fork_command): Rename to ...
2836 (detach_checkpoint_command): ... this.
2837 (info_forks_command): Rename to ...
2838 (info_checkpoints_command): ... this.
2839 (_initialize_linux_fork): Remove stale comments. Adjust.
2841 2009-07-02 Pedro Alves <pedro@codesourcery.com>
2843 * linux-nat.c (linux_child_follow_fork): If we're staying attached
2844 to the child process, enable event reporting on it. Don't handle
2845 checkpoints here. Instead, add the child fork to the lwp thread
2846 and inferior lists without clobbering the previous inferior. Let
2847 the thread_db layer learn about a new child process, even if
2848 following the parent.
2849 (linux_nat_switch_fork): Delete lwps of the current inferior only,
2850 instead of clearing the whole list. Use thread_change_ptid to
2851 give the core the illusion the new checkpoint is still the same
2852 inferior. Clear the register cache.
2853 (linux_handle_extended_wait): Handle checkpoints here.
2854 (linux_multi_process): Turn on.
2855 * linux-fork.c (struct fork_info) <pc>: Remove field.
2856 (init_fork_list): Do not delete the checkpoint from the inferior
2857 list (it is not there).
2858 (fork_load_infrun_state): Don't switch inferior_ptid here. Pass
2859 the new checkpoint's ptid to linux_nat_switch_fork.
2860 (fork_save_infrun_state): Make static. Don't stop the pc field of
2861 fork_info, it's gone.
2862 (linux_fork_mourn_inferior): Don't delete the checkpoint from the
2863 inferior list, it's not there.
2864 (linux_fork_detach): Ditto.
2865 (delete_fork_command): Replace mention of fork/checkpoint by
2867 (detach_fork_command): Likewise. Don't delete the checkpoint from
2869 (info_forks_command): Adjust.
2870 (restore_detach_fork): Delete.
2871 (checkpointing_pid): New.
2872 (linux_fork_checkpointing_p): New.
2873 (save_detach_fork): Delete.
2874 (checkpoint_command): Delete temp_detach_fork. Don't remove
2875 breakpoints, that's a nop. Store the pid of the process we're
2876 checkpointing, and use make_cleanup_restore_integer to restore it.
2877 Don't reinsert breakpoints here.
2878 (process_command, fork_command): Delete.
2879 (restart_command): Update comments to only mention checkpoints,
2881 (_initialize_linux_fork): Delete "fork", "process", "info forks"
2883 * linux-fork.h (fork_save_infrun_state, fork_list): Delete
2885 (linux_fork_checkpointing_p): Declare.
2886 * cli/cli-cmds.c (killlist): New.
2887 * cli/cli-cmds.h (killlist): Declare.
2888 * gdbcmd.h (killlist): Declare.
2889 * inferior.c: Include "gdbthread.h".
2890 (detach_inferior_command, kill_inferior_command)
2891 (inferior_command): New.
2892 (info_inferiors_command): Allow specifying a specific inferior id.
2893 (_initialize_inferiors): Register "inferior", "kill inferior" and
2894 "detach inferior" commands.
2895 * infcmd.c (_initialize_infcmd): Make "kill" a prefix command.
2896 * gdbthread.h (any_thread_of_process): Declare.
2897 * thread.c (any_thread_of_process): New.
2899 * NEWS: Mention multi-inferior debugging. Mention 'info
2900 inferiors', 'inferior', 'detach inferior' and 'kill inferior' as
2902 (Removed commands): New section, mentioning that 'info forks',
2903 'fork', 'process', 'delete fork' and 'detach fork' are now gone.
2905 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
2907 * gdbarch.sh (current_gdbarch): Remove global variable.
2908 (find_arch_by_info): Remove, inline into ...
2909 (gdbarch_find_by_info): ... this. Remove current_gdbarch swapping.
2910 (deprecated_current_gdbarch_select_hack): Rename to ...
2911 (deprecated_target_gdbarch_select_hack): ... this. Do not set
2912 or access current_gdbarch.
2913 * gdbarch.c, gdbarch.h: Regenerate.
2915 * arch-utils.c (gdbarch_update_p): Update call.
2916 (set_gdbarch_from_file): Likewise.
2918 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
2920 * defs.h (extract_signed_integer, extract_unsigned_integer,
2921 extract_long_unsigned_integer, store_signed_integer,
2922 store_unsigned_integer): Add BYTE_ORDER parameter.
2923 * findvar.c (extract_signed_integer, extract_unsigned_integer,
2924 extract_long_unsigned_integer, store_signed_integer,
2925 store_unsigned_integer): Add BYTE_ORDER parameter. Use it
2926 instead of current_gdbarch.
2928 * gdbcore.h (read_memory_integer, safe_read_memory_integer,
2929 read_memory_unsigned_integer, write_memory_signed_integer,
2930 write_memory_unsigned_integer): Add BYTE_ORDER parameter.
2931 * corefile.c (struct captured_read_memory_integer_arguments): Add
2933 (safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into
2934 struct captured_read_memory_integer_arguments.
2935 (do_captured_read_memory_integer): Pass it to read_memory_integer.
2936 (read_memory_integer): Add BYTE_ORDER parameter. Pass it to
2937 extract_signed_integer.
2938 (read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to
2939 extract_unsigned_integer.
2940 (write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it
2941 to store_signed_integer.
2942 (write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it
2943 to store_unsigned_integer.
2945 * target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter.
2946 * target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter.
2947 Pass it to extract_unsigned_integer.
2950 Update calls to extract_signed_integer, extract_unsigned_integer,
2951 extract_long_unsigned_integer, store_signed_integer,
2952 store_unsigned_integer, read_memory_integer,
2953 read_memory_unsigned_integer, safe_read_memory_integer,
2954 write_memory_signed_integer, write_memory_unsigned_integer, and
2955 get_target_memory_unsigned to pass byte order:
2956 * ada-lang.c (ada_value_binop): Update.
2957 * ada-valprint.c (char_at): Update.
2958 * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update.
2959 * alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call,
2960 alpha_extract_return_value, alpha_read_insn,
2961 alpha_get_longjmp_target): Update.
2962 * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update.
2963 * amd64obsd-tdep.c (amd64obsd_supply_uthread,
2964 amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update.
2965 * amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue,
2966 amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel,
2967 amd64_displaced_step_fixup): Update.
2968 * arm-linux-tdep.c (arm_linux_sigreturn_init,
2969 arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update.
2970 * arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue,
2971 arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc,
2972 arm_get_next_pc, arm_extract_return_value, arm_store_return_value,
2973 arm_return_value): Update.
2974 * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
2975 * auxv.c (default_auxv_parse): Update.
2976 * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address,
2977 avr_scan_prologue, avr_extract_return_value,
2978 avr_frame_prev_register, avr_push_dummy_call): Update.
2979 * bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset,
2980 bsd_uthread_wait, bsd_uthread_thread_alive,
2981 bsd_uthread_extra_thread_info): Update.
2982 * c-lang.c (c_printstr, print_wchar): Update.
2983 * cp-valprint.c (cp_print_class_member): Update.
2984 * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache,
2985 cris_push_dummy_call, cris_scan_prologue, cris_store_return_value,
2986 cris_extract_return_value, find_step_target, dip_prefix,
2987 sixteen_bit_offset_branch_op, none_reg_mode_jump_op,
2988 move_mem_to_reg_movem_op, get_data_from_address): Update.
2989 * dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update.
2990 * dwarf2-frame.c (execute_cfa_program): Update.
2991 * dwarf2loc.c (find_location_expression): Update.
2992 * dwarf2read.c (dwarf2_const_value): Update.
2993 * expprint.c (print_subexp_standard): Update.
2994 * findvar.c (unsigned_pointer_to_address, signed_pointer_to_address,
2995 unsigned_address_to_pointer, address_to_signed_pointer,
2996 read_var_value): Update.
2997 * frame.c (frame_unwind_register_signed,
2998 frame_unwind_register_unsigned, get_frame_memory_signed,
2999 get_frame_memory_unsigned): Update.
3000 * frame-unwind.c (frame_unwind_got_constant): Update.
3001 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp,
3002 frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
3004 * frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue,
3005 frv_extract_return_value, find_func_descr,
3006 frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update.
3007 * f-valprint.c (f_val_print): Update.
3008 * gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr):
3010 * h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue,
3011 h8300_push_dummy_call, h8300_extract_return_value,
3012 h8300h_extract_return_value, h8300_store_return_value,
3013 h8300h_store_return_value): Update.
3014 * hppabsd-tdep.c (hppabsd_find_global_pointer): Update.
3015 * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register):
3017 * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline,
3018 hppa64_hpux_in_solib_call_trampoline,
3019 hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code,
3020 hppa_hpux_sigtramp_frame_unwind_cache,
3021 hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer,
3022 hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern,
3023 hppa32_hpux_search_dummy_call_sequence,
3024 hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state,
3025 hppa_hpux_unwind_adjust_stub): Update.
3026 * hppa-linux-tdep.c (insns_match_pattern,
3027 hppa_linux_find_global_pointer): Update.
3028 * hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call,
3029 hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call,
3030 skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache,
3031 hppa_pseudo_register_read, hppa_frame_prev_register_helper,
3032 hppa_match_insns): Update.
3033 * hpux-thread.c (hpux_thread_fetch_registers): Update.
3034 * i386-tdep.c (i386bsd_sigcontext_addr): Update.
3035 * i386-cygwin-tdep.c (core_process_module_section): Update.
3036 * i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn,
3037 amd64_darwin_sstep_at_sigreturn): Update.
3038 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr,
3039 amd64_darwin_sigcontext_addr): Likewise.
3040 * i386-linux-nat.c (i386_linux_sigcontext_addr): Update.
3041 * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update.
3042 * i386-nto-tdep.c (i386nto_sigcontext_addr): Update.
3043 * i386obsd-nat.c (i386obsd_supply_pcb): Update.
3044 * i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread,
3045 i386obsd_trapframe_cache): Update.
3046 * i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump,
3047 i386_analyze_frame_setup, i386_analyze_prologue,
3048 i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache,
3049 i386_get_longjmp_target, i386_push_dummy_call,
3050 i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr,
3051 i386_fetch_pointer_argument): Update.
3052 * i387-tdep.c (i387_supply_fsave): Update.
3053 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update.
3054 * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write,
3055 examine_prologue, ia64_frame_cache, ia64_frame_prev_register,
3056 ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register,
3057 ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id,
3058 ia64_libunwind_frame_prev_register,
3059 ia64_libunwind_sigtramp_frame_this_id,
3060 ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer,
3061 find_extant_func_descr, find_func_descr,
3062 ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id,
3063 ia64_unwind_pc): Update.
3064 * iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer,
3065 iq2000_scan_prologue, iq2000_extract_return_value,
3066 iq2000_push_dummy_call): Update.
3067 * irix5nat.c (fill_gregset): Update.
3068 * jv-lang.c (evaluate_subexp_java): Update.
3069 * jv-valprint.c (java_value_print): Update.
3070 * lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call,
3071 lm32_extract_return_value, lm32_store_return_value): Update.
3072 * m32c-tdep.c (m32c_push_dummy_call, m32c_return_value,
3073 m32c_skip_trampoline_code, m32c_m16c_address_to_pointer,
3074 m32c_m16c_pointer_to_address): Update.
3075 * m32r-tdep.c (m32r_store_return_value, decode_prologue,
3076 m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value):
3078 * m68hc11-tdep.c (m68hc11_pseudo_register_read,
3079 m68hc11_pseudo_register_write, m68hc11_analyze_instruction,
3080 m68hc11_push_dummy_call): Update.
3081 * m68linux-tdep.c (m68k_linux_pc_in_sigtramp,
3082 m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache):
3084 * m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup,
3085 m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache,
3086 m68k_get_longjmp_target): Update.
3087 * m88k-tdep.c (m88k_fetch_instruction): Update.
3088 * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write,
3089 mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update.
3090 * mi/mi-main.c (mi_cmd_data_write_memory): Update.
3091 * mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg,
3092 mips64_linux_get_longjmp_target, mips64_fill_gregset,
3093 mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update.
3094 * mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update.
3095 * mips-tdep.c (mips_fetch_instruction, fetch_mips_16,
3096 mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call,
3097 mips_o32_push_dummy_call, mips_o64_push_dummy_call,
3098 mips_single_step_through_delay, mips_skip_pic_trampoline_code,
3099 mips_integer_to_address): Update.
3100 * mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call):
3102 * monitor.c (monitor_supply_register, monitor_write_memory,
3103 monitor_read_memory_single): Update.
3104 * moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value,
3105 moxie_analyze_prologue): Update.
3106 * mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor,
3107 mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info,
3108 mt_push_dummy_call): Update.
3109 * objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
3110 read_objc_methlist_method, read_objc_object, read_objc_super,
3111 read_objc_class, find_implementation_from_class): Update.
3112 * ppc64-linux-tdep.c (ppc64_desc_entry_point,
3113 ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache):
3115 * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer,
3116 ppcobsd_sigtramp_frame_cache): Update.
3117 * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call,
3118 do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call,
3119 ppc64_sysv_abi_return_value): Update.
3120 * ppc-linux-nat.c (ppc_linux_auxv_parse): Update.
3121 * procfs.c (procfs_auxv_parse): Update.
3122 * p-valprint.c (pascal_val_print): Update.
3123 * regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned,
3124 regcache_raw_write_signed, regcache_raw_write_unsigned,
3125 regcache_cooked_read_signed, regcache_cooked_read_unsigned,
3126 regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update.
3127 * remote-m32r-sdi.c (m32r_fetch_register): Update.
3128 * remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory):
3130 * rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value,
3131 rs6000_convert_from_func_ptr_addr, branch_dest,
3132 rs6000_software_single_step): Update.
3133 * rs6000-tdep.c (rs6000_in_function_epilogue_p,
3134 ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence,
3135 bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue,
3136 rs6000_skip_main_prologue, rs6000_skip_trampoline_code,
3137 rs6000_frame_cache): Update.
3138 * s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write,
3139 s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load,
3140 s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache,
3141 extend_simple_arg, s390_push_dummy_call, s390_return_value): Update.
3142 * scm-exp.c (scm_lreadr): Update.
3143 * scm-lang.c (scm_get_field, scm_unpack): Update.
3144 * scm-valprint.c (scm_val_print): Update.
3145 * score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call,
3146 score_fetch_inst): Update.
3147 * sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way,
3148 sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value,
3149 sh64_pseudo_register_read, sh64_pseudo_register_write,
3150 sh64_frame_prev_register): Update:
3151 * sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu,
3152 sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu,
3153 sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update.
3154 * solib-darwin.c (darwin_load_image_infos): Update.
3155 * solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2,
3156 find_canonical_descriptor_in_load_object): Update.
3157 * solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos,
3158 irix_open_symbol_file_object): Update.
3159 * solib-som.c (som_solib_create_inferior_hook, link_map_start,
3160 som_current_sos, som_open_symbol_file_object): Update.
3161 * solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME):
3163 * solib-svr4.c (read_program_header, scan_dyntag_auxv,
3164 solib_svr4_r_ldsomap): Update.
3165 * sparc64-linux-tdep.c (sparc64_linux_step_trap): Update.
3166 * sparc64obsd-tdep.c (sparc64obsd_supply_uthread,
3167 sparc64obsd_collect_uthread): Update.
3168 * sparc64-tdep.c (sparc64_pseudo_register_read,
3169 sparc64_pseudo_register_write, sparc64_supply_gregset,
3170 sparc64_collect_gregset): Update.
3171 * sparc-linux-tdep.c (sparc32_linux_step_trap): Update.
3172 * sparcobsd-tdep.c (sparc32obsd_supply_uthread,
3173 sparc32obsd_collect_uthread): Update.
3174 * sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code,
3175 sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow,
3176 sparc_collect_rwindow): Update.
3177 * spu-linux-nat.c (parse_spufs_run): Update.
3178 * spu-tdep.c (spu_pseudo_register_read_spu,
3179 spu_pseudo_register_write_spu, spu_pointer_to_address,
3180 spu_analyze_prologue, spu_in_function_epilogue_p,
3181 spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step,
3182 spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect,
3183 info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist,
3184 info_spu_dma_command, info_spu_proxydma_command): Update.
3185 * stack.c (print_frame_nameless_args, frame_info): Update.
3186 * symfile.c (read_target_long_array, simple_read_overlay_table,
3187 simple_read_overlay_region_table): Update.
3188 * target.c (debug_print_register): Update.
3189 * tramp-frame.c (tramp_frame_start): Update.
3190 * v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call,
3191 v850_extract_return_value, v850_store_return_value,
3192 * valarith.c (value_binop, value_bit_index): Update.
3193 * valops.c (value_cast): Update.
3194 * valprint.c (val_print_type_code_int, val_print_string,
3195 read_string): Update.
3196 * value.c (unpack_long, unpack_double, unpack_field_as_long,
3197 modify_field, pack_long): Update.
3198 * vax-tdep.c (vax_store_arguments, vax_push_dummy_call,
3199 vax_skip_prologue): Update.
3200 * xstormy16-tdep.c (xstormy16_push_dummy_call,
3201 xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p,
3202 xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry,
3203 xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update.
3204 * xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read,
3205 xtensa_pseudo_register_write, xtensa_frame_cache,
3206 xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update.
3209 * dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral,
3210 decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add
3211 BYTE_ORDER parameter.
3212 (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
3214 (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
3215 (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
3216 * dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it
3217 instead of current_gdbarch.
3218 (decimal_to_string, decimal_from_integral, decimal_from_floating,
3219 decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter.
3220 Pass it to match_endianness.
3221 (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
3222 parameters. Pass them to match_endianness.
3223 (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
3224 Pass them to match_endianness.
3225 (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
3226 Pass them to match_endianness.
3227 * valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and
3228 BYTE_ORDER_Y output parameters.
3229 (value_binop): Update call to value_args_as_decimal.
3231 Update calls to decimal_to_string, decimal_from_string,
3232 decimal_from_integral, decimal_from_floating, decimal_to_doublest,
3233 decimal_is_zero, decimal_binop, decimal_compare and decimal_convert
3234 to pass/receive byte order:
3235 * c-exp.y (parse_number): Update.
3236 * printcmd.c (printf_command): Update.
3237 * valarith.c (value_args_as_decimal, value_binop, value_logical_not,
3238 value_equal, value_less): Update.
3239 * valops.c (value_cast, value_one): Update.
3240 * valprint.c (print_decimal_floating): Update.
3241 * value.c (unpack_long, unpack_double): Update.
3242 * python/python-value.c (valpy_nonzero): Update.
3245 * ada-valprint.c (char_at): Add BYTE_ORDER parameter.
3246 (printstr): Update calls to char_at.
3247 (ada_val_print_array): Likewise.
3248 * valprint.c (read_string): Add BYTE_ORDER parameter.
3249 (val_print_string): Update call to read_string.
3250 * c-lang.c (c_get_string): Likewise.
3251 * charset.h (target_wide_charset): Add BYTE_ORDER parameter.
3252 * charset.c (target_wide_charset): Add BYTE_ORDER parameter.
3253 Use it instead of current_gdbarch.
3254 * printcmd.c (printf_command): Update calls to target_wide_charset.
3255 * c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter.
3256 Pass to target_wide_charset. Use it instead of current_gdbarch.
3257 (classify_type): Add BYTE_ORDER parameter. Pass to
3258 charset_for_string_type. Allow NULL encoding pointer.
3259 (print_wchar): Add BYTE_ORDER parameter.
3260 (c_emit_char): Update calls to classify_type and print_wchar.
3261 (c_printchar, c_printstr): Likewise.
3264 * gdbarch.sh (in_solib_return_trampoline): Convert to type "m".
3265 * gdbarch.c, gdbarch.h: Regenerate.
3266 * arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH
3268 * arch-utils.c (generic_in_solib_return_trampoline): Likewise.
3269 * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise.
3270 * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise.
3271 (rs6000_skip_trampoline_code): Update call.
3273 * alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
3274 dynamic_sigtramp_offset and pc_in_sigtramp callbacks.
3275 (alpha_read_insn): Add GDBARCH parameter.
3276 * alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter.
3277 (alpha_register_to_value): Pass architecture to alpha_sts.
3278 (alpha_extract_return_value): Likewise.
3279 (alpha_value_to_register): Pass architecture to alpha_lds.
3280 (alpha_store_return_value): Likewise.
3281 (alpha_read_insn): Add GDBARCH parameter.
3282 (alpha_skip_prologue): Pass architecture to alpha_read_insn.
3283 (alpha_heuristic_proc_start): Likewise.
3284 (alpha_heuristic_frame_unwind_cache): Likewise.
3285 (alpha_next_pc): Likewise.
3286 (alpha_sigtramp_frame_this_id): Pass architecture to
3287 tdep->dynamic_sigtramp_offset callback.
3288 (alpha_sigtramp_frame_sniffer): Pass architecture to
3289 tdep->pc_in_sigtramp callback.
3290 * alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter.
3291 (alphafbsd_sigtramp_offset): Likewise.
3292 * alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH
3293 parameter. Pass to alpha_read_insn.
3294 (alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to
3295 alpha_linux_sigtramp_offset_1.
3296 (alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to
3297 alpha_linux_sigtramp_offset.
3298 (alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn
3299 and alpha_linux_sigtramp_offset.
3300 * alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter.
3301 (alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
3302 alphanbsd_sigtramp_offset.
3303 * alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter.
3304 (alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
3306 (alphaobsd_sigcontext_addr): Pass architecture to
3307 alphaobsd_sigtramp_offset.
3308 * alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH
3311 * amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter.
3312 (amd64_skip_prologue): Pass architecture to amd64_analyze_prologue.
3313 (amd64_frame_cache): Likewise.
3315 * arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove.
3316 (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue,
3317 thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros.
3318 * arm-wince-tdep.c: Include "frame.h".
3320 * avr-tdep.c (EXTRACT_INSN): Remove.
3321 (avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN.
3322 (avr_skip_prologue): Pass architecture to avr_scan_prologue.
3323 (avr_frame_unwind_cache): Likewise.
3325 * cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member.
3326 (find_step_target): Initialize it.
3327 (get_data_from_address): Add BYTE_ORDER parameter.
3328 (bdap_prefix): Pass byte order to get_data_from_address.
3329 (handle_prefix_assign_mode_for_aritm_op): Likewise.
3330 (three_operand_add_sub_cmp_and_or_op): Likewise.
3331 (handle_inc_and_index_mode_for_aritm_op): Likewise.
3333 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter.
3334 (frv_linux_sigcontext_reg_addr): Pass architecture to
3335 frv_linux_pc_in_sigtramp.
3336 (frv_linux_sigtramp_frame_sniffer): Likewise.
3338 * h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter.
3339 (h8300_analyze_prologue): Add GDBARCH parameter. Pass to
3340 h8300_is_argument_spill.
3341 (h8300_frame_cache, h8300_skip_prologue): Pass architecture
3342 to h8300_analyze_prologue.
3344 * hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
3345 in_solib_call_trampoline callback.
3346 (hppa_in_solib_call_trampoline): Add GDBARCH parameter.
3347 * hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH
3349 (hppa64_push_dummy_call): Pass architecture to
3350 hppa64_convert_code_addr_to_fptr.
3351 (hppa_match_insns): Add GDBARCH parameter.
3352 (hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to
3354 (hppa_skip_trampoline_code): Pass architecture to hppa_match_insns.
3355 (hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to
3356 hppa_match_insns_relaxed.
3357 (hppa_stub_unwind_sniffer): Pass architecture to
3358 tdep->in_solib_call_trampoline callback.
3359 * hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter.
3360 (hppa32_hpux_search_dummy_call_sequence): Pass architecture to
3361 hppa_hpux_search_pattern.
3362 * hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter.
3363 (hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter.
3364 Pass to insns_match_pattern.
3365 (hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to
3366 hppa_linux_sigtramp_find_sigcontext.
3367 (hppa_linux_sigtramp_frame_sniffer): Likewise.
3368 (hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter.
3369 (hppa64_hpux_in_solib_call_trampoline): Likewise.
3371 * i386-tdep.c (i386_follow_jump): Add GDBARCH parameter.
3372 (i386_analyze_frame_setup): Add GDBARCH parameter.
3373 (i386_analyze_prologue): Add GDBARCH parameter. Pass to
3374 i386_follow_jump and i386_analyze_frame_setup.
3375 (i386_skip_prologue): Pass architecture to i386_analyze_prologue
3376 and i386_follow_jump.
3377 (i386_frame_cache): Pass architecture to i386_analyze_prologue.
3378 (i386_pe_skip_trampoline_code): Add FRAME parameter.
3379 * i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter.
3380 * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass
3381 frame to i386_pe_skip_trampoline_code.
3383 * ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter
3384 to sigcontext_register_address callback.
3385 * ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter.
3386 (ia64_find_unwind_table): Pass architecture to
3387 ia64_find_global_pointer.
3388 (find_extant_func_descr): Add GDBARCH parameter.
3389 (find_func_descr): Pass architecture to find_extant_func_descr
3390 and ia64_find_global_pointer.
3391 (ia64_sigtramp_frame_init_saved_regs): Pass architecture to
3392 tdep->sigcontext_register_address callback.
3393 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add
3396 * iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter.
3397 (iq2000_frame_cache): Pass architecture to iq2000_scan_prologue.
3399 * lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter.
3400 (lm32_skip_prologue, lm32_frame_cache): Pass architecture to
3401 lm32_analyze_prologue.
3403 * m32r-tdep.c (decode_prologue): Add GDBARCH parameter.
3404 (m32r_skip_prologue): Pass architecture to decode_prologue.
3406 * m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter.
3407 (m68hc11_scan_prologue): Pass architecture to
3408 m68hc11_analyze_instruction.
3410 * m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter.
3411 (m68k_analyze_prologue): Pass architecture to
3412 m68k_analyze_frame_setup.
3414 * m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter.
3415 (m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order
3416 to m88k_fetch_instruction.
3417 (m88k_skip_prologue): Pass architecture to m88k_analyze_prologue.
3418 (m88k_frame_cache): Likewise.
3420 * mep-tdep.c (mep_get_insn): Add GDBARCH parameter.
3421 (mep_analyze_prologue): Pass architecture to mep_get_insn.
3423 * mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter.
3424 (mips32_next_pc): Pass architecture to mips_fetch_instruction.
3425 (deal_with_atomic_sequence): Likewise.
3426 (unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction.
3427 (mips16_scan_prologue): Likewise.
3428 (mips32_scan_prologue): Likewise.
3429 (mips16_in_function_epilogue_p): Likewise.
3430 (mips32_in_function_epilogue_p): Likewise.
3431 (mips_about_to_return): Likewise.
3432 (mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue.
3433 (mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue.
3434 (mips_skip_prologue): Pass architecture to mips16_scan_prologue
3435 and mips32_scan_prologue.
3436 (mips_in_function_epilogue_p): Pass architecture to
3437 mips16_in_function_epilogue_p and
3438 mips32_in_function_epilogue_p.
3439 (heuristic_proc_start): Pass architecture to mips_fetch_instruction
3440 and mips_about_to_return.
3441 (mips_skip_mips16_trampoline_code): Pass architecture to
3442 mips_fetch_instruction.
3443 (fetch_mips_16): Add GDBARCH parameter.
3444 (mips16_next_pc): Pass architecture to fetch_mips_16.
3445 (extended_mips16_next_pc): Pass architecture to unpack_mips16 and
3448 * objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
3449 read_objc_methlist_method, read_objc_object, read_objc_super,
3450 read_objc_class): Add GDBARCH parameter.
3451 (find_implementation_from_class): Add GDBARCH parameter, pass
3452 to read_objc_class, read_objc_methlist_nmethods, and
3453 read_objc_methlist_method.
3454 (find_implementation): Add GDBARCH parameter, pass to
3455 read_objc_object and find_implementation_from_class.
3456 (resolve_msgsend, resolve_msgsend_stret): Pass architecture
3457 to find_implementation.
3458 (resolve_msgsend_super, resolve_msgsend_super_stret): Pass
3459 architecture to read_objc_super and find_implementation_from_class.
3461 * ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter.
3462 (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target,
3463 ppc64_standard_linkage3_target): Pass architecture to
3464 ppc64_desc_entry_point.
3465 * rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter.
3466 (skip_prologue): Pass byte order to bl_to_blrl_insn_p.
3467 (rs6000_fetch_instruction): Add GDBARCH parameter.
3468 (rs6000_skip_stack_check): Add GDBARCH parameter, pass to
3469 rs6000_fetch_instruction.
3470 (skip_prologue): Pass architecture to rs6000_fetch_instruction.
3472 * remote-mips.c (mips_store_word): Return old_contents as host
3473 integer value instead of target bytes.
3475 * s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member.
3476 (s390_analyze_prologue): Initialize it.
3477 (extend_simple_arg): Add GDBARCH parameter.
3478 (s390_push_dummy_call): Pass architecture to extend_simple_arg.
3480 * scm-lang.c (scm_get_field): Add BYTE_ORDER parameter.
3481 * scm-lang.h (scm_get_field): Add BYTE_ORDER parameter.
3482 (SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field.
3483 * scm-valprint.c (scm_scmval_print): Likewise.
3484 (scm_scmlist_print, scm_ipruk, scm_scmval_print): Define
3487 * sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter.
3488 (sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to
3489 look_for_args_moves.
3490 (sh64_skip_prologue): Pass architecture to
3491 sh64_skip_prologue_hard_way.
3492 * sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter.
3493 (sh_skip_prologue): Pass architecture to sh_analyze_prologue.
3494 (sh_frame_cache): Likewise.
3496 * solib-irix.c (extract_mips_address): Add GDBARCH parameter.
3497 (fetch_lm_info, irix_current_sos, irix_open_symbol_file_object):
3498 Pass architecture to extract_mips_address.
3500 * sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter.
3501 * sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter.
3502 (sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture
3503 to sparc_fetch_wcookie.
3504 (sparc32_frame_prev_register): Likewise.
3505 * sparc64-tdep.c (sparc64_frame_prev_register): Likewise.
3506 * sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise.
3507 * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise.
3509 * spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter.
3510 (spu_skip_prologue): Pass architecture to spu_analyze_prologue.
3511 (spu_virtual_frame_pointer): Likewise.
3512 (spu_frame_unwind_cache): Likewise.
3513 (info_spu_mailbox_list): Add BYTE_ORER parameter.
3514 (info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list.
3515 (info_spu_dma_cmdlist): Add BYTE_ORER parameter.
3516 (info_spu_dma_command, info_spu_proxydma_command): Pass byte order
3517 to info_spu_dma_cmdlist.
3519 * symfile.c (read_target_long_array): Add GDBARCH parameter.
3520 (simple_read_overlay_table, simple_read_overlay_region_table,
3521 simple_overlay_update_1): Pass architecture to read_target_long_array.
3523 * v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter.
3524 (v850_frame_cache): Pass architecture to v850_analyze_prologue.
3526 * xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH
3528 (xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture
3529 to xstormy16_analyze_prologue.
3530 (xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter.
3531 (xstormy16_find_jmp_table_entry): Likewise.
3532 (xstormy16_skip_trampoline_code): Pass architecture to
3533 xstormy16_resolve_jmp_table_entry.
3534 (xstormy16_pointer_to_address): Likewise.
3535 (xstormy16_address_to_pointer): Pass architecture to
3536 xstormy16_find_jmp_table_entry.
3538 * xtensa-tdep.c (call0_track_op): Add GDBARCH parameter.
3539 (call0_analyze_prologue): Add GDBARCH parameter, pass to
3541 (call0_frame_cache): Pass architecture to call0_analyze_prologue.
3542 (xtensa_skip_prologue): Likewise.
3544 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3546 * defs.h (strlen_paddr, paddr, paddr_nz): Remove.
3547 (paddress): Add GDBARCH parameter.
3548 * utils.c (strlen_paddr, paddr, paddr_nz): Remove.
3549 (paddress): Add GDBARCH parameter, use it instead of current_gdbarch.
3550 * ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter.
3551 * ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter,
3552 use it instead of current_gdbarch.
3554 Update calls to ui_out_field_core_addr to pass architecture:
3555 * ada-lang.c (print_one_exception): Update.
3556 * breakpoint.c (print_one_breakpoint_location,
3557 print_one_exception_catchpoint): Update.
3558 * disasm.c (dump_insns): Update.
3559 * darwin-nat-info.c (darwin_debug_regions_recurse): Update.
3560 * mi/mi-main.c (mi_cmd_data_read_memory): Update.
3561 * mi/mi-symbol-cmds.c: Include "objfiles.h".
3562 (mi_cmd_symbol_list_lines): Update.
3563 * stack.c (print_frame_info, print_frame): Update.
3565 Update callers of paddress to pass architecture:
3566 * ada-tasks.c (info_task): Update.
3567 * ada-valprint.c (ada_val_print_1): Update.
3568 * annotate.c (annotate_source, annotate_frame_begin): Update.
3569 * breakpoint.c (insert_bp_location, describe_other_breakpoints,
3571 * cli/cli-cmds.c (edit_command, list_command, print_disassembly):
3573 * corefile.c (memory_error): Update.
3574 * c-valprint.c (print_function_pointer_address, c_val_print): Update.
3575 * disasm.c (dis_asm_print_address): Update.
3576 * exec.c (print_section_info): Update.
3577 * f-valprint.c (f_val_print): Update.
3578 * infcmd.c: Include "arch-utils.h".
3579 (jump_command, program_info): Update.
3580 * linux-fork.c: Include "arch-utils.h".
3581 (info_forks_command): Update.
3582 * m2-valprint.c (print_function_pointer_address,
3583 print_unpacked_pointer, print_variable_at_address,
3584 m2_val_print): Update.
3585 * m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command):
3587 * printcmd.c (print_address, print_address_demangle, address_info):
3589 * p-valprint.c (pascal_val_print): Update.
3590 * source.c: Include "arch-utils.h".
3591 (line_info): Update.
3592 * stack.c (frame_info, print_block_frame_labels): Update.
3593 * symfile.c (add_symbol_file_command, list_overlays_command): Update.
3594 * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1,
3595 print_symbol, print_partial_symbols, maintenance_info_psymtabs,
3596 maintenance_check_symtabs): Update.
3597 * symtab.c (find_pc_sect_symtab): Update.
3598 * target.c (deprecated_debug_xfer_memory): Update.
3599 * tracepoint.c (scope_info): Update.
3600 * tui/tui-stack.c (tui_make_status_line): Update.
3601 * valprint.c (val_print_string): Update.
3603 Update callers of paddr_nz to use paddress instead (keeping
3604 user-visible output identical):
3605 * alpha-tdep.c (alpha_heuristic_proc_start): Update.
3606 * amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn,
3607 amd64_displaced_step_fixup): Update.
3608 * arch-utils.c (simple_displaced_step_copy_insn): Update.
3609 * auxv.c (fprint_target_auxv): Update.
3610 * breakpoint.c (insert_single_step_breakpoint): Update.
3611 * buildsym.c (finish_block): Update.
3612 * cli/cli-dump.c (restore_section_callback): Update.
3613 * fbsd-nat.c (fbsd_find_memory_regions): Update.
3614 * frame.c (frame_unwind_register_value): Update.
3615 * gcore.c (gcore_create_callback): Update.
3616 * hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update.
3617 * i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm,
3618 i386_record_lea_modrm_addr, i386_record_lea_modrm,
3619 i386_process_record): Update.
3620 * ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id,
3621 ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id,
3622 ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update.
3623 * infrun.c (displaced_step_prepare, displaced_step_fixup,
3624 handle_inferior_event, insert_step_resume_breakpoint_at_sal,
3625 insert_longjmp_resume_breakpoint): Update.
3626 * linux-nat.c (linux_nat_find_memory_regions): Update.
3627 * linux-record.c (record_linux_system_call): Update.
3628 * mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call,
3629 mips_n32n64_push_dummy_call, mips_o32_push_dummy_call,
3630 mips_o64_push_dummy_call): Update.
3631 * monitor.c (monitor_error, monitor_remove_breakpoint): Update.
3632 * record.c (record_arch_list_add_mem, record_wait,
3633 record_xfer_partial): Update.
3634 * remote-mips.c (mips_fetch_word, mips_check_lsi_error,
3635 mips_common_breakpoint): Update.
3636 * remote-sim.c (gdbsim_xfer_inferior_memory): Update.
3637 * rs6000-tdep.c (ppc_displaced_step_fixup): Update.
3638 * solib-som.c (som_current_sos): Update.
3639 * symfile.c (load_progress, generic_load): Update.
3640 * symfile-mem.c (add_vsyscall_page): Update.
3641 * valops.c (value_fetch_lazy): Update.
3642 * windows-tdep.c (windows_xfer_shared_library): Update.
3644 Update callers of paddr_nz to use paddress instead (changing
3645 user-visible output to make it more correct):
3646 * dwarf2loc.c (locexpr_describe_location): Update.
3647 * ia64-tdep.c (ia64_memory_insert_breakpoint,
3648 ia64_memory_remove_breakpoint): Update.
3649 * jv-valprint.c (java_value_print): Update.
3650 * m32c-tdep.c (m32c_m16c_address_to_pointer): Update.
3651 * monitor.c (monitor_read_memory): Update.
3653 Update callers of paddr to use paddress instead (changing
3654 user-visible output to make it more correct):
3655 * arm-tdep.c (arm_push_dummy_call): Update.
3656 * breakpoint.c (insert_bp_location, create_thread_event_breakpoint,
3657 create_breakpoint): Update.
3658 * darwin-nat-info.c (darwin_debug_regions): Update.
3659 * dcache.c (dcache_info): Update.
3660 * dsrec.c (load_srec, make_srec): Update.
3661 * dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program,
3662 dwarf2_frame_cache): Update.
3663 * gcore.c (gcore_copy_callback): Update.
3664 * gnu-nat.c (gnu_xfer_memory): Update.
3665 * mips-linux-nat.c (mips_show_dr): Update.
3666 * monitor.c (monitor_write_memory, monitor_insert_breakpoint,
3667 monitor_remove_breakpoint): Update.
3668 * remote.c (compare_sections_command): Update.
3669 * remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint,
3670 m32r_remove_breakpoint, m32r_insert_watchpoint,
3671 m32r_remove_watchpoint): Update.
3672 * sol-thread.c (info_cb): Update.
3673 * symfile.c (load_progress): Update.
3675 Update callers of paddress or paddr_nz to use hex_string instead
3676 (changes output of internal/error/debug messages only):
3677 * dwarf2read.c (dump_die_shallow): Update.
3678 * frame.c (fprint_field, fprint_frame, frame_pc_unwind,
3679 get_frame_func, create_new_frame): Update.
3680 * hppa-tdep.c (find_unwind_entry, unwind_command): Update.
3681 * ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x,
3682 ia64_get_dyn_info_list): Update.
3683 * maint.c (maintenance_translate_address): Update.
3684 * mi/mi-cmd-var.c (mi_cmd_var_create): Update.
3685 * target.c (target_flash_erase): Update.
3687 Update callers of paddr/paddr_nz to use phex/phex_nz instead,
3688 using an appropriate address size. Remove use of strlen_paddr.
3689 * exec.c (exec_files_info): Update.
3690 * i386-nat.c (i386_show_dr): Update.
3691 * remote.c (remote_flash_erase): Update.
3692 * m32r-rom.c (m32r_load_section): Update.
3693 * monitor.c (monitor_vsprintf, monitor_store_register): Update.
3694 * remote.c (remote_check_symbols, remote_search_memory): Update.
3695 * remote-mips.c (mips_request, mips_common_breakpoint): Update.
3696 * scm-valprint.c (scm_ipruk, scm_scmval_print): Update.
3697 * sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update.
3698 * sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs,
3699 sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs,
3700 sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs,
3701 sh_dsp_show_regs): Update.
3702 * xcoffsolib.c (sharedlibrary_command): Update.
3705 * maint.c (maint_print_section_info): Add ADDR_SIZE parameter.
3706 Use hex_string_custom instead of paddr.
3707 (print_bfd_section_info): Pass address size.
3708 (print_objfile_section_info): Likewise.
3710 * annotate.h (annotate_source): Add GDBARCH parameter.
3711 (annotate_frame_begin): Likewise.
3712 * annotate.c (annotate_source): Add GDBARCH parameter.
3713 (annotate_frame_begin): Likewise.
3714 * source.c (identify_source_line): Update call to annotate_source.
3715 * stack.c (print_frame_info, print_frame): Update call to
3716 annotate_frame_begin.
3718 * breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter.
3719 (create_breakpoint, create_ada_exception_breakpoint): Update call.
3721 * stack.c (print_block_frame_labels): Add GDBARCH parameter.
3722 (print_frame_label_vars): Update call.
3724 * symmisc.c (print_partial_symbols): Add GDBARCH parameter.
3725 (dump_psymtab): Update call to print_partial_symbols.
3726 (struct print_symbol_args): Add GDBARCH member.
3727 (dump_symtab_1): Set print_symbol_args architecture member.
3728 (print_symbol): Use it.
3730 * windows-tdep.h (windows_xfer_shared_library): Add GDBARCH
3732 * windows-tdep.c (windows_xfer_shared_library): Likewise.
3733 * i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member.
3734 (core_process_module_section): Pass architecture from cpms_data to
3735 windows_xfer_shared_library.
3736 (windows_core_xfer_shared_libraries): Initialize cmps_data
3737 architecture member.
3738 * windows-nat.c (windows_xfer_shared_libraries): Pass architecture
3739 to windows_xfer_shared_library.
3741 * defs.h (print_address): Add GDBARCH parameter.
3742 * printcmd.c (print_address): Add GDBARCH parameter.
3743 (print_scalar_formatted, do_examine): Update call.
3744 * findcmd.c (find_command): Update call.
3745 * tracepoint.c: Include "arch-utils.h".
3746 (trace_find_line_command): Update call.
3747 * tui/tui-disasm.c (tui_disassemble): Update call.
3749 * value.h (print_address_demangle): Add GDBARCH parameter.
3750 * printcmd.c (print_address_demangle): Add GDBARCH parameter.
3751 * c-valprint.c (print_function_pointer_address, c_val_print):
3753 * f-valprint.c (f_val_print): Update call.
3754 * gnu-v3-abi.c (gnuv3_print_method_ptr): Update call.
3755 * jv-valprint.c (java_val_print): Update call.
3756 * m2-valprint.c (print_function_pointer_address, m2_val_print):
3758 * p-valprint.c (pascal_val_print): Update call.
3760 * disasm.c (gdb_disassemble_info): Install architecture into
3761 di.application_data field.
3763 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3765 * disasm.h (gdb_disassembly): Add GDBARCH parameter.
3766 (gdb_print_insn): Likewise.
3767 * disasm.c (dump_insns): Add GDBARCH parameter. Use it instead
3769 (do_mixed_source_and_assembly): Add GDBARCH parameter. Pass to
3771 (do_assembly_only): Likewise.
3772 (gdb_disassembly): Add GDBARCH parameter. Use it instead of
3773 current_gdbarch. Pass to subroutines.
3774 (gdb_print_insn): Add GDBARCH parameter. Use it instead of
3777 * stack.c (struct gdb_disassembly_stub_args): Add GDBARCH member.
3778 (gdb_disassembly_stub): Pass architecture to gdb_disassembly.
3779 (do_gdb_disassembly): Add GDBARCH argument. Store into args.
3780 (print_frame_info): Pass architecture to do_gdb_disassembly.
3782 * printcmd.c (print_formatted): Pass architecture to gdb_print_insn.
3784 * mi/mi-cmd-disas.c: Include "arch-utils.h"
3785 (mi_cmd_disassemble): Pass architecture to gdb_disassembly.
3787 * cli/cli-cmds.c: Include "arch-utils.h".
3788 (print_disassembly): Add GDBARCH parameter. Pass to gdb_disassembly
3789 and tui_show_assembly.
3790 (disassemble_current_function): Pass architecture to
3791 tui_get_low_disassembly_address and print_disassembly.
3792 (disassemble_command): Pass architecture to
3793 tui_get_low_disassembly_address and print_disassembly.
3795 * tui/tui.c (tui_show_assembly): Add GDBARCH parameter. Pass to
3796 tui_update_source_windows_with_addr.
3798 * tui/tui-data.h (struct tui_locator_element): Add GDBARCH member.
3799 (struct tui_source_info): Likewise.
3800 * tui/tui-data.c (tui_clear_win_detail): Clear source_info.gdbarch.
3802 * tui/tui-disasm.c (tui_disassemble): Add GDBARCH parameter.
3803 Pass to gdb_print_insn.
3804 (tui_find_disassembly_address): Add GDBARCH parameter. Pass to
3806 (tui_set_disassem_content): Add GDBARCH parameter. Install into
3807 source_info.gdbarch. Pass to tui_disassemble.
3808 (tui_show_disassem): Add GDBARCH parameter. Pass to
3809 tui_update_source_window.
3810 (tui_show_disassem_and_update_source): Add GDBARCH parameter. Pass to
3811 tui_show_disassem and tui_update_source_window.
3813 (tui_get_begin_asm_address): Return locator architecture in addition
3814 to locator PC value.
3816 (tui_get_low_disassembly_address): Add GDBARCH parameter. Pass to
3817 tui_get_low_disassembly_address.
3819 (tui_vertical_disassem_scroll): Pass architecture to subroutines.
3821 * tui/tui-disasm.h (tui_set_disassem_content): Add GDBARCH parameter.
3822 (tui_show_disassem): Likewise.
3823 (tui_show_disassem_and_update_source): Likewise.
3824 (tui_get_begin_asm_address): Return architecture and PC value.
3826 * tui/tui.h (tui_get_low_disassembly_address): Add GDBARCH parameter.
3827 (tui_show_assembly): Add GDBARCH parameter.
3829 * tui/tui-layout.c (extract_display_start_addr): Return current window
3830 architecture in addition to current PC value.
3832 (tui_set_layout): Update calls to tui_get_low_disassembly_address and
3833 extract_display_start_addr. Pass architecture to
3834 tui_update_source_windows_with_addr.
3836 * tui/tui-source.c: Include "objfiles.h".
3837 (tui_set_source_content): Initialize window architecture.
3838 (tui_show_symtab_source): Add GDBARCH parameter. Pass to
3839 tui_update_source_window_as_is
3841 * tui/tui-source.h (tui_show_symtab_source): Add GDBARCH parameter.
3843 * tui/tui-stack.c (tui_set_locator_info): Add GDBARCH parameter.
3844 Install locator architecture.
3845 (tui_set_locator_filename): Update call.
3846 (tui_show_frame_info): Pass architecture to tui_set_locator_info
3849 * tui/tui-win.c (make_visible_with_new_height): Pass architecture
3850 to tui_update_source_window.
3852 * tui/tui-winsource.c: Include "objfiles.h".
3853 (tui_display_main): Update call to tui_get_begin_asm_address.
3854 Pass architecture to tui_update_source_windows_with_addr.
3855 (tui_update_source_window): Add GDBARCH parameter. Pass to
3856 tui_update_source_window_as_is.
3857 (tui_update_source_window_as_is): Add GDBARCH parameter.
3858 Pass to tui_set_disassem_content.
3859 (tui_update_source_windows_with_addr): Add GDBARCH parameter.
3860 Pass to subroutines.
3861 (tui_update_source_windows_with_line): Pass objfile architecture
3863 (tui_horizontal_source_scroll): Pass architecture to
3864 tui_update_source_window_as_is.
3866 * tui/tui-winsource.h (tui_update_source_window): Add GDBARCH
3868 (tui_update_source_window_as_is): Likewise.
3869 (tui_update_source_windows_with_addr): Likewise.
3871 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3873 * breakpoint.h (struct breakpoint): New member GDBARCH.
3874 * breakpoint.c: Include "arch-utils.h".
3875 (set_raw_breakpoint_without_location): Add GDBARCH parameter.
3876 Use it to set breakpoint architecture.
3877 (set_raw_breakpoint): Add GDBARCH parameter.
3878 (create_internal_breakpoint): Likewise.
3879 (create_catchpoint): Likewise.
3880 (create_fork_vfork_event_catchpoint): Likewise.
3881 (create_breakpoint): Likewise.
3882 (create_breakpoints): Likewise.
3883 (break_command_really): Likewise.
3884 (create_ada_exception_breakpoint): Likewise.
3885 Update local callers to pass architecture:
3886 (create_internal_breakpoint): Update.
3887 (create_overlay_event_breakpoint): Update.
3888 (create_longjmp_master_breakpoint): Update.
3889 (create_thread_event_breakpoint): Update.
3890 (create_solib_event_breakpoint): Update.
3891 (create_catchpoint): Update.
3892 (create_fork_vfork_event_catchpoint): Update.
3893 (set_momentary_breakpoint): Update.
3894 (clone_momentary_breakpoint): Update.
3895 (create_breakpoint): Update.
3896 (create_breakpoints): Update.
3897 (break_command_really): Update.
3898 (break_command_1): Update.
3899 (set_breakpoint): Update.
3900 (watch_command_1): Update.
3901 (catch_fork_command_1): Update.
3902 (catch_exec_commnd_1): Update.
3903 (handle_gnu_v3_exceptions): Update.
3904 (create_ada_exception_breakpoint): Update.
3905 (catch_ada_exception_command): Update.
3906 (catch_assert_command): Update.
3907 (trace_command): Update.
3909 * breakpoint.h (struct bp_location): New member GDBARCH.
3910 * breakpoint.c (get_sal_arch): New function.
3911 (set_raw_breakpoint): Set location architecture.
3912 (add_location_to_breakpoint): Likewise.
3913 (clone_momentary_breakpoint): Likewise.
3914 (watch_command_1): Likewise.
3915 (update_watchpoint): Likewise.
3916 (bp_loc_is_permanent): Use location architecture instead of
3918 (adjust_breakpoint_address): Add GDBARCH parameter; use it
3919 instead of current_gdbarch.
3920 Update callers of adjust_breakpoint_address to pass
3921 breakpoint location architecture:
3922 (set_raw_breakpoint): Update.
3923 (watch_command_1): Update.
3925 * tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead
3927 (add_local_symbols): Add GDBARCH parameter. Pass to collect_symbol.
3928 (encode_actions): Pass tracepoint architecture to add_local_symbols
3929 (encode_actions): Use tracepoint architecture instead of
3930 current_gdbarch. Pass it to add_local_symbols and collect_symbol.
3932 * breakpoint.h (struct breakpoint_ops): Replace last_addr parameter
3933 of print_one callback with last_loc.
3934 * breakpoint.c (print_one_breakpoint_location): Replace last_addr
3935 parameter with last_loc.
3936 (print_one_breakpoint): Likewise.
3937 (do_captured_breakpoint_query): Update call.
3938 (breakpoint_1): Pass last_loc instead of last_addr to
3939 print_one_breakpoint. Pass last location architecture instead of
3940 current_gdbarch to set_next_address.
3941 Update all implementations of the print_one callback:
3942 * breakpoint.c (print_one_catch_fork): Update.
3943 (print_one_catch_vfork): Update.
3944 (print_one_catch_exec): Update.
3945 (print_one_exception_catchpoint): Update.
3946 * ada-lang.c (print_one_exception): Update.
3947 (print_one_catch_exception): Update.
3948 (print_one_catch_exception_unhandled): Update.
3949 (print_one_catch_assert): Update.
3951 * breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS
3952 parameter. Use it instead of gdbarch_addr_bit (current_gdbarch).
3953 (print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it
3954 to print_one_breakpoint_location.
3955 (breakpoint_address_bits): New function.
3956 (do_captured_breakpoint_query): Compute number of address bits to print
3957 and pass it to print_one_breakpoint.
3958 (breakpoint_1): Likewise. Use it instead of current_gdbarch.
3960 * breakpoint.h (create_thread_event_breakpoint): Add GDBARCH.
3961 * breakpoint.c (create_thread_event_breakpoint): Likewise.
3962 Update callers to create_thread_event_breakpoint:
3963 * aix-thread.c (pd_enable): Update.
3964 * linux-thread-db.c (enable_thread_event): Update.
3966 * breakpoint.h (create_solib_event_breakpoint): Add GDBARCH.
3967 * breakpoint.c (create_solib_event_breakpoint): Likewise.
3968 Update callers to create_solib_event_breakpoint:
3969 * solib-frv.c (enable_break, enable_break2): Update.
3970 * solib-pa64.c (pa64_solib_create_inferior_hook): Update.
3971 * solib-som.c (som_solib_create_inferior_hook): Update.
3972 * solib-darwin.c (darwin_solib_create_inferior_hook): Update.
3973 * solib-svr4.c (enable_break): Update.
3975 * breakpoint.h (insert_single_step_breakpoint): Add GDBARCH.
3976 * breakpoint.c (insert_single_step_breakpoint): Likewise.
3977 Update callers to insert_single_step_breakpoint:
3978 * alpha-tdep.c (alpha_software_single_step): Update.
3979 * arm-linux-tdep.c (arm_linux_software_single_step): Update.
3980 * arm-tdep.c (arm_software_single_step): Update.
3981 * cris-tdep.c (cris_software_single_step): Update.
3982 * rs6000-aix-tdep.c (rs6000_software_single_step): Update.
3983 * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update.
3984 * sparc-tdep.c (sparc_software_single_step): Update.
3985 * spu-tdep.c (spu_software_single_step): Update.
3986 * mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter.
3987 Pass it to insert_single_step_breakpoint.
3988 (mips_software_single_step): Pass architecture to
3989 deal_with_atomic_sequence and insert_single_step_breakpoint.
3991 * breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH.
3992 (deprecated_remove_raw_breakpoint): Likewise.
3993 * breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH.
3994 (deprecated_remove_raw_breakpoint): Likewise.
3995 Update callers to deprecated_insert_raw_breakpoint and
3996 deprecated_remove_raw_breakpoint:
3997 * breakpoint.c (single_step_gdbarch): New static variable.
3998 (insert_single_step_breakpoint): Pass GDBARCH parameter to
3999 deprecated_insert_raw_breakpoint. Store it in single_step_gdbarch.
4000 (remove_single_step_breakpoints): Pass architecture stored in
4001 single_step_gdbarch to deprecated_remove_raw_breakpoint.
4002 * rs6000-nat.c (exec_one_dummy_insn): Update.
4003 * solib-irix.c (enable_break, disable_break): Update.
4004 * procfs.c (procfs_mourn_inferior): Update.
4005 (remove_dbx_link_breakpoint): Update.
4007 * breakpoint.h (set_breakpoint): Add GDBARCH parameter.
4008 (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
4009 * breakpoint.c (set_breakpoint): Add GDBARCH parameter.
4010 (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
4011 Update callers to set_breakpoint, set_momentary_breakpoint and
4012 set_momentary_breakpoint_at_pc:
4013 * breakpoint.c (set_momentary_breakpoint_at_pc): Update.
4014 (until_break_command): Update.
4015 * infcall.c (call_function_by_hand): Update.
4016 * infcmd.c (finish_backward, finish_forward): Update.
4017 * infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH
4018 parameter. Pass it to set_momentary_breakpoint.
4019 (insert_longjmp_resume_breakpoint): Add GDBARCH parameter.
4020 Pass it to set_momentary_breakpoint_at_pc.
4021 (handle_inferior_event): Update.
4022 (insert_step_resume_breakpoint_at_frame): Update.
4023 (insert_step_resume_breakpoint_at_caller): Update..
4024 * mi/mi-cmd-break.c: Include "arch-utils.h".
4025 (mi_cmd_break_insert): Update.
4027 * target.h (struct target_ops): Add GDBARCH parameter to
4028 to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint,
4029 and to_remove_hw_breakpoint members.
4030 (target_insert_breakpoint, target_remove_breakpoint,
4031 target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH
4032 parameter, pass to target routine.
4033 (memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH
4035 * target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint,
4036 debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add
4037 GDBARCH parameter, pass to target routine.
4038 (update_current_target): Update function signature.
4039 * breakpoint.c (insert_bp_location, remove_breakpoint,
4040 deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint):
4041 Pass architecture to target_ routines.
4042 Update all implementations of the target breakpoint routines to take
4043 GDBARCH parameter and use it instead of GDBARCH as appropriate:
4044 * corelow.c (ignore): Update.
4045 * exec.c (ignore): Update.
4046 * mem-break.c (memory_insert_breakpoint): Update.
4047 (memory_remove_breakpoint): Update.
4048 * monitor.c (monitor_insert_breakpoint): Update.
4049 (monitor_remove_breakpoint): Update.
4050 * record.c (record_insert_breakpoint): Update.
4051 (record_beneath_to_insert_breakpoint): Update.
4052 (record_remove_breakpoint): Update.
4053 (record_beneath_to_remove_breakpoint): Update.
4054 * remote.c (remote_insert_breakpoint): Update.
4055 (remote_remove_breakpoint): Update.
4056 (remote_insert_hw_breakpoint): Update.
4057 (remote_remove_hw_breakpoint): Update.
4058 * remote-m32r-sdi.c (m32r_insert_breakpoint): Update.
4059 (m32r_remove_breakpoint): Update.
4060 * remote-mips.c (mips_insert_breakpoint): Update.
4061 (mips_remove_breakpoint): Update.
4062 * i386-nat.c (i386_insert_hw_breakpoint): Update.
4063 (i386_remove_hw_breakpoint): Update.
4064 * nto-procfs.c (procfs_insert_breakpoint): Update.
4065 (procfs_remove_breakpoint): Update.
4066 (procfs_insert_hw_breakpoint): Update.
4067 (procfs_remove_hw_breakpoint): Update.
4069 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4071 * frame.h (frame_unwind_arch): New.
4072 (frame_unwind_caller_arch): Likewise.
4073 * frame-unwind.h (frame_prev_arch_ftype): New type.
4074 (struct frame_unwind): New member prev_arch.
4075 * frame.c (struct frame_info): New member prev_arch.
4076 (frame_unwind_arch): New function.
4077 (frame_unwind_caller_arch): Likewise..
4078 (get_frame_arch): Reimplement in terms of frame_unwind_arch.
4079 * sentinel-frame.c (sentinel_frame_prev_arch): New function.
4080 (sentinel_frame_unwinder): Install it.
4082 * frame.c (frame_pc_unwind): Use frame_unwind_arch instead
4084 (frame_unwind_register_value): Likewise.
4085 (frame_unwind_register_signed): Likewise.
4086 (frame_unwind_register_unsigned): Likewise.
4087 * frame-unwind.c (frame_unwind_got_optimized): Likewise.
4088 (frame_unwind_got_register): Likewise.
4089 (frame_unwind_got_constant): Likewise.
4090 (frame_unwind_got_bytes): Likewise.
4091 (frame_unwind_got_address): Likewise.
4093 * frame.h (enum frame_type): New value ARCH_FRAME.
4094 * frame.c (fprint_frame_type): Handle ARCH_FRAME.
4095 * stack.c (print_frame_info): Likewise.
4097 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4099 * target.h (struct target_ops): New member to_thread_architecture.
4100 (target_thread_architecture): New macro.
4101 * target.c (update_current_target): Inherit to_thread_architecture.
4102 (default_thread_architecture): New function.
4103 (debug_to_thread_architecture): New function.
4104 (setup_target_debug): Handle to_thread_architecture.
4106 * regcache.h (get_thread_arch_regcache): New.
4107 * regcache.c (struct regcache_list): New data type.
4108 (current_regcache): Hold regcache list instead of single regcache.
4109 (current_thread_ptid, current_thread_arch): New static variables.
4110 (get_thread_arch_regcache): New function.
4111 (get_thread_regcache): Use it. Call target_thread_architecture.
4112 (regcache_thread_ptid_changed): Update to current_regcache changes.
4113 (registers_changed): Likewise. Reset current_thread_arch and
4114 current_thread_ptid.
4116 * remote.c (remote_wait): Access target registers in target_gdbarch.
4117 * linux-nat.c (linux_nat_do_thread_registers): Likewise.
4118 * proc-service.c (ps_lgetregs, ps_lsetregs): Likewise.
4119 (ps_lgetfpregs, ps_lsetfpregs): Likewise.
4120 * sol-thread.c (ps_lgetregs, ps_lsetregs): Likewise.
4121 (ps_lgetfpregs, ps_lsetfpregs): Likewise.
4122 * solib-svr4.c (enable_break): Likewise.
4123 (svr4_relocate_main_executable): Likewise.
4125 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4127 * python/python-internal.h (struct language_defn): Declare.
4128 (python_gdbarch, python_language): Likewise.
4129 (ensure_python_env): Add prototype.
4130 (make_cleanup_py_restore_gil): Remove prototype.
4132 * python/python.c: Include "arch-utils.h", "value.h" and "language.h".
4133 (python_gdbarch, python_language): New global variables.
4134 (struct python_env): New data type.
4135 (ensure_python_env, restore_python_env): New functions.
4136 (eval_python_from_control_command): Call ensure_python_env to
4137 install current architecture and language.
4138 (python_command, gdbpy_new_objfile): Likewise.
4139 * python/python-cmd.c: Include "arch-utils.h" and "language.h".
4140 (cmdpy_destroyer, cmdpy_function, cmdpy_completer): Call
4142 * python/python-type.c (clean_up_objfile_types): Likewise.
4143 * python/python-objfile.c: Include "language.h".
4144 (clean_up_objfile): Call ensure_python_env.
4145 * python/python-prettyprint.c (apply_val_pretty_printer): Likewise.
4146 (apply_varobj_pretty_printer): Do not call PyGILState_Ensure.
4147 * varobj.c (varobj_ensure_python_env): New helper function.
4148 (varobj_get_display_hint, update_dynamic_varobj_children,
4149 install_default_visualizer, varobj_set_visualizer, free_variable,
4150 value_get_print_value): Call it.
4151 (value_get_print_value): Add varobj argument instead of pretty
4152 printer argument. Update all callers.
4154 * python/python-utils.c (py_gil_restore, make_cleanup_py_restore_gil):
4157 * value.h (internal_function_fn): Add GDBARCH and LANGUAGE argument.
4158 (call_internal_function): Likewise.
4159 * value.c (call_internal_function): Likewise. Pass to handler.
4160 * eval.c (evaluate_subexp_standard): Update call.
4161 * python/python-function.c: Include "language.h".
4162 (fnpy_call): Add GDBARCH and LANGAUAGE arguments and call
4163 make_cleanup_python_env.
4165 * python/python-value.c (builtin_type_pyint, builtin_type_pyfloat,
4166 builtin_type_pylong, builtin_type_pybool, builtin_type_pychar,
4167 valpy_str): Use python_gdbarch and python_language instead of
4168 current_gdbarch and current_language.
4169 * python/python-type.c (typy_lookup_typename): Likewise.
4171 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4173 * arch-utils.c (selected_byte_order): Return target_byte_order_user.
4174 (show_endian): Use target_byte_order_user if specified; otherwise
4175 use get_current_arch () instead of current_gdbarch.
4176 (show_architecture): Use set_architecture_string if specified;
4177 otherwise use get_current_arch () instead of current_gdbarch.
4178 (get_current_arch): New function.
4179 * arch-utils.h (get_current_arch): Add prototype.
4181 * osabi.c (show_osabi): Use get_current_arch () instead of
4184 * findcmd.c: Include "arch-utils.h".
4185 (parse_find_args): Add BIG_P argument. Use it instead of byte order
4187 (find_command): Use get_current_arch () instead of current_gdbarch.
4188 Pass byte order to parse_find_args.
4190 * maint.c: Include "arch-utils.h".
4191 (maintenance_print_architecture): Use get_current_arch () instead
4194 * reggroups.c: Include "arch-utils.h".
4195 (maintenance_print_reggroups): Use get_current_arch () instead
4198 * symfile.c: Include "arch-utils.h".
4199 (overlay_load_command): Use get_current_arch () instead of
4202 * value.c: Include "arch-utils.h".
4203 (show_convenience): Use get_current_arch () instead of
4206 * tui/tui-regs.c: Include "arch-utils.h".
4207 (tui_reg_next_command): Use get_current_arch () instead of
4210 * mi/mi-main.c: Include "arch-utils.h".
4211 (mi_cmd_data_read_memory): Use get_current_arch () instead of
4214 * parse.c: Include "arch-utils.h".
4215 (parse_exp_in_context): Use get_current_arch () instead of
4218 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4220 * gdbtypes.c (make_pointer_type, make_reference_type,
4221 smash_to_memberptr_type, lookup_array_range_type, check_stub_method):
4222 Use type architecture instead of current_gdbarch.
4224 * gdbtypes.h (address_space_name_to_int, address_space_int_to_name):
4225 Add GDBARCH paramter.
4226 * gdbtypes.c (address_space_name_to_int, address_space_int_to_name):
4227 Add GDBARCH parameter. Use it instead of current_gdbarch.
4228 * c-typeprint.c (c_type_print_modifier): Update call.
4229 * parse.c (push_type_address_space): Likewise.
4231 * findvar.c (extract_typed_address, store_typed_address): Use type
4232 architecture instead of current_gdbarch.
4234 * value.c (value_as_address, unpack_field_as_long): Use type architecture
4235 instead of current_gdbarch.
4237 * doublest.c (floatformat_from_length): Add GDBARCH argument. Use it
4238 instead of current_gdbarch.
4239 (floatformat_from_type): Pass type architecture.
4241 * infcall.c (find_function_addr): Use type architecture instead
4244 * valarith.c (value_bitstring_subscript, value_x_binop, value_neg,
4245 value_bit_index): Use type architecture instead of current_gdbarch.
4246 * valops.c (value_cast, value_slice): Likewise.
4248 * value.h (modify_field): Add TYPE argument.
4249 * value.c (modify_field): Add TYPE argument. Use type architecture
4250 instead of current_gdbarch.
4251 (set_internalvar_component): Likewise.
4252 * eval.c (evaluate_struct_tuple): Update call.
4253 * valops.c (value_assign): Likewise.
4254 * ada-lang.c (modify_general_field): Likewise. Add TYPE argument.
4255 (make_array_descriptor): Update calls.
4256 (move_bits): Add BITS_BIG_ENDIAN_P argument. Use it instead of
4258 (ada_value_assign, value_assign_to_component): Update calls.
4259 (decode_packed_array, ada_value_primitive_packed_val, ada_value_assign,
4260 value_assign_to_component): Use type arch instead of current_gdbarch.
4262 * printcmd.c (float_type_from_length): Remove GDBARCH argument,
4263 use type architecture instead.
4264 (print_scalar_formatted, printf_command): Update calls. Use type
4265 architecture instead of current_gdbarch.
4266 * valprint.c (val_print_type_code_int): Use type architecture
4267 instead of current_gdbarch.
4268 * varobj.c (value_get_print_value): Likewise.
4269 * python/python-prettyprint.c (print_string_repr): Add GDBARCH
4270 argument. Use it instead of current_gdbarch.
4271 (apply_val_pretty_printer): Update call.
4273 * ada-valprint.c (ada_val_print_1): Use type architecture instead
4275 * c-valprint.c (print_function_pointer_address): Add GDBARCH argument.
4276 Use it instead of current_gdbarch.
4277 (c_val_print): Update calls passing type architecture.
4278 * f-valprint.c (f_val_print): Use type architecture instead of
4280 * jv-valprint (java_value_print): Likewise.
4281 * m2-valprint.c (print_function_pointer_address): Add GDBARCH argument.
4282 Use it instead of current_gdbarch.
4283 (print_unpacked_pointer): Update calls passing type architecture.
4284 * scm-valprint.c (scm_scmval_print): Use type architecture instead of
4287 * gnu-v3-abi.c (get_class_arch): Remove.
4288 (gnuv3_rtti_type): Use get_type_arch instead of get_class_arch. Remove
4289 special-case check for Java classes.
4290 (gnuv3_virtual_fn_field, gnuv3_baseclass_offset, gnuv3_print_method_ptr,
4291 gnuv3_method_ptr_size, gnuv3_make_method_ptr, gnuv3_method_ptr_to_value):
4292 Use get_type_arch instead of get_class_arch.
4294 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4296 * gdbtypes.h (TYPE_OBJFILE_OWNED, TYPE_OWNER): New macros.
4297 (TYPE_OBJFILE, TYPE_ALLOC, TYPE_ZALLOC): Reimplement.
4298 (alloc_type_arch): Add prototype.
4299 (alloc_type_copy): Likewise.
4300 (get_type_arch): Likewise.
4301 (arch_type): Likewise.
4302 (arch_integer_type): Likewise.
4303 (arch_character_type): Likewise.
4304 (arch_boolean_type): Likewise.
4305 (init_float_type): Remove, replace by ...
4306 (arch_float_type): ... this.
4307 (init_complex_type): Remove, replace by ...
4308 (arch_complex_type): ... this.
4309 (init_flags_type): Remove, replace by ...
4310 (arch_flags_type): ... this.
4311 (init_composite_type): Remove, replace by ...
4312 (arch_composite_type): ... this.
4314 * gdbtypes.c (alloc_type): No longer support NULL objfile.
4315 (init_type): Likewise.
4316 (alloc_type_arch): New function.
4317 (alloc_type_copy): New function.
4318 (get_type_arch): New function.
4320 (smash_type): Preserve type ownership information.
4321 (make_pointer_type, make_reference_type, make_function_type,
4322 smash_to_memberptr_type, smash_to_method_type): No longer
4323 preserve OBJFILE across smash_type calls.
4324 (make_pointer_type, make_reference_type, make_function_type,
4325 lookup_memberptr_type, lookup_methodptr_type, allocate_stub_method,
4326 create_range_type, create_array_type, create_set_type, copy_type):
4327 Use alloc_type_copy when allocating types.
4328 (check_typedef): Use alloc_type_arch.
4329 (copy_type_recursive): Likewise. Preserve type ownership data
4331 (recursive_dump_type): Dump type ownership data.
4332 (alloc_type_instance): Update type ownership check.
4333 (copy_type, copy_type_recursive): Likewise.
4335 (arch_type): New function.
4336 (arch_integer_type): Likewise.
4337 (arch_character_type): Likewise.
4338 (arch_boolean_type): Likewise.
4339 (init_float_type): Remove, replace by ...
4340 (arch_float_type): ... this.
4341 (init_complex_type): Remove, replace by ...
4342 (arch_complex_type): ... this.
4343 (init_flags_type): Remove, replace by ...
4344 (arch_flags_type): ... this.
4345 (append_flags_type_flag): Move down.
4346 (init_composite_type): Remove, replace by ...
4347 (arch_composite_type): ... this.
4348 (append_composite_type_field_aligned,
4349 append_composite_type_field): Move down.
4351 * gdbarch.c (gdbtypes_post_init): Allocate all types
4352 using per-architecture routines.
4353 * ada-lang.c (ada_language_arch_info): Likewise.
4354 * f-lang.c (build_fortran_types): Likewise.
4355 * jv-lang.c (build_java_types): Likewise.
4356 * m2-lang.c (build_m2_types): Likewise.
4357 * scm-lang.c (build_scm_types): Likewise.
4359 * ada-lang.c (ada_type_of_array): Use alloc_type_copy.
4360 (packed_array_type): Likewise.
4361 (ada_template_to_fixed_record_type_1): Likewise.
4362 (template_to_static_fixed_type): Likewise.
4363 (to_record_with_fixed_variant_part): Likewise.
4364 (to_fixed_variant_branch_type): Likewise.
4365 (to_fixed_array_type): Likewise.
4366 (to_fixed_range_type): Likewise.
4367 (empty_record): Use type instead of objfile argument.
4368 Use alloc_type_copy.
4369 (to_fixed_variant_branch_type): Update call to empty_record.
4370 * jv-lang.c (type_from_class): Use alloc_type_arch.
4372 * arm-tdep.c (arm_ext_type): Allocate per-architecture type.
4373 * i386-tdep.c (i386_eflags_type, i386_mxcsr_type, i387_ext_type,
4374 i386_mmx_type, i386_sse_type): Likewise.
4375 * ia64-tdep.c (ia64_ext_type): Likewise.
4376 * m32c-tdep.c (make_types): Likewise.
4377 * m68k-tdep.c (m68k_ps_type, m68881_ext_type): Likewise.
4378 * rs6000-tdep.c (rs6000_builtin_type_vec64,
4379 rs6000_builtin_type_vec128): Likewise.
4380 * sparc-tdep.c (sparc_psr_type, sparc_fsr_type): Likewise.
4381 * sparc64-tdep.c (sparc64_pstate_type, sparc64_fsr_type,
4382 sparc64_fprs_type): Likewise.
4383 * spu-tdep.c (spu_builtin_type_vec128): Likewise.
4384 * xtensa-tdep.c (xtensa_register_type): Likewise.
4385 * linux-tdep.c (linux_get_siginfo_type): Likewise.
4386 * target-descriptions.c (tdesc_gdb_type): Likewise.
4387 * gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
4389 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4391 * i386-tdep.h (struct gdbarch_tdep): Add i386_eflags_type and
4392 i386_mxcsr_type members.
4393 (i386_eflags_type): Make into function.
4394 (i386_mxcsr_type): Likewise.
4395 * i386-tdep.c (i386_eflags_type): Make into function.
4396 (i386_mxcsr_type): Likewise.
4397 (i386_register_type): Update uses.
4398 (i386_init_types): Remove.
4399 (_initialize_i386_tdep): Do not call it.
4400 * amd64-tdep.c (amd64_register_type): Update uses.
4402 * m68k-tdep.h (struct gdbarch_tdep): Add m68k_ps_type member.
4403 * m68k-tdep.c (m68k_ps_type): Make into function.
4404 (m68k_register_type): Update use.
4405 (m68k_init_types): Remove.
4406 (_initialize_m68k_tdep): Do not call it.
4408 * sparc-tdep.h (struct gdbarch_tdep): Add sparc_psr_type,
4409 sparc_fsr_type, sparc64_pstate_type, sparc64_fsr_type, and
4410 sparc64_fprs_type members.
4411 * sparc-tdep.c (sparc_psr_type): Make into function.
4412 (sparc_fsr_type): Likewise.
4413 (sparc32_register_type): Update uses.
4414 (sparc_init_types): Remove.
4415 (_initialize_sparc_tdep): Do not call it.
4416 * sparc64-tdep.c (sparc64_pstate_type): Make into function.
4417 (sparc64_fsr_type): Likewise.
4418 (sparc64_fprs_type): Likewise.
4419 (sparc64_register_type): Update uses.
4420 (sparc64_init_types): Remove.
4421 (_initialize_sparc64_tdep): Likewise.
4423 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4425 * gdbtypes.h (builtin_type_ieee_single, builtin_type_ieee_double,
4426 builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
4427 builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
4428 (init_float_type, init_complex_type): Add prototypes.
4429 * gdbtypes.c (builtin_type_ieee_single, builtin_type_ieee_double,
4430 builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
4431 builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
4432 (_initialize_gdbtypes): Do not initialize them.
4433 (build_flt): Rename to ...
4434 (init_float_type): ... this. Make global.
4435 (build_complex): Rename to ...
4436 (init_complex_type): ... this. Make global. Remove BIT argument.
4437 (gdbtypes_post_init): Update calls.
4439 * ada-lang.c (ada_language_arch_info): Use init_float_type.
4440 * jv-lang.c (build_java_types): Likewise.
4441 * m2-lang.c (build_m2_types): Likewise.
4442 * f-lang.c (build_fortran_types): Use init_float_type and
4445 * target-descriptions.c (tdesc_gdb_type): Call init_float_type instead
4446 of using builtin_type_ieee_single, builtin_type_ieee_double, or
4447 builtin_type_arm_ext.
4449 * ia64-tdep.h (struct gdbarch_tdep): Add ia64_ext_type member.
4450 * ia64-tdep.c (builtin_type_ia64_ext): Remove.
4451 (_initialize_ia64_tdep): Do not initialize it.
4452 (floatformat_valid, floatformat_ia64_ext, floatformats_ia64_ext):
4454 (ia64_ext_type): New function.
4455 (ia64_register_reggroup_p, ia64_convert_register_p,
4456 ia64_register_to_value, ia64_value_to_register,
4457 ia64_extract_return_value, ia64_store_return_value): Use ia64_ext_type
4458 instead of builtin_type_ia64_ext.
4460 * i386-tdep.h (struct gdbarch_tdep): Add i387_ext_type member.
4461 (i387_ext_type): Add prototype.
4462 * i386-tdep.c (i387_ext_type): New function.
4463 (i386_extract_return_value, i386_store_return_value,
4464 i386_register_type): Use it instead of builtin_type_i387_ext.
4465 * amd64-tdep.c (amd64_register_type): Likewise.
4466 * i387-tdep.c (print_i387_value, i387_register_to_value,
4467 i387_value_to_register): Likewise.
4468 (print_i387_value, print_i387_ext): Add GDBARCH argument.
4469 (print_i387_ext, i387_print_float_info): Pass to subroutines.
4471 * m68k-tdep.h (struct gdbarch_tdep): Add m68881_ext_type member.
4472 * m68k-tdep.c (m68881_ext_type): New function.
4473 (m68k_register_type, m68k_convert_register_p): Use it instead
4474 of builtin_type_m68881_ext.
4476 * arm-tdep.h (struct gdbarch_tdep): Add arm_ext_type member.
4477 * arm-tdep.c (arm_ext_type): New function.
4478 (arm_register_type): Use it instead of builtin_type_arm_ext.
4480 * alpha-tdep.c (alpha_register_type): Use builtin types
4481 instead of builtin_type_ieee_double.
4483 * mips-tdep.c (mips_float_register_type, mips_double_register_type):
4485 (mips_register_type): Use builtin types instead of
4486 builtin_type_ieee_single and builtin_type_ieee_double.
4487 (mips_print_fp_register): Use builtin types instead of
4488 mips_float_register_type and mips_double_register_type.
4490 * hppa-tdep.c (hppa32_register_type, hppa64_register_type):
4491 Use builtin types instead of builtin_type_ieee_single and
4492 builtin_type_ieee_double.
4494 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4496 * gdbtypes.h (builtin_type_int0, builtin_type_int8, builtin_type_uint8,
4497 builtin_type_int16, builtin_type_uint16, builtin_type_int32,
4498 builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
4499 builtin_type_int128, builtin_type_uint128): Remove.
4500 (struct builtin_type): New members builtin_int0, builtin_int8,
4501 builtin_uint8, builtin_int16, builtin_uint16, builtin_int32,
4502 builtin_uint32, builtin_int64, builtin_uint64, builtin_int128,
4503 and builtin_uint128.
4504 * gdbtypes.c (builtin_type_int0, builtin_type_int8, builtin_type_uint8,
4505 builtin_type_int16, builtin_type_uint16, builtin_type_int32,
4506 builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
4507 builtin_type_int128, builtin_type_uint128): Remove.
4508 (_initialize_gdbtypes): Do not initialize them.
4509 (gdbtypes_post_init): Initialize fixed-size integer types.
4511 * dwarf2expr.c (unsigned_address_type, signed_address_type): Add
4512 GDBARCH argument. Return platform-specific type.
4513 (dwarf2_read_address, execute_stack_op): Update calls.
4515 * target-descriptions.c (tdesc_gdb_type): Use platform-specific types
4516 instead of global builtin_int_... variables.
4517 * mi/mi-main.c (mi_cmd_data_read_memory): Likewise.
4518 * printcmd.c (do_examine): Likewise.
4519 * jv-exp.y (parse_number): Likewise.
4521 * alpha-tdep.c (alpha_register_type, alpha_push_dummy_call,
4522 alpha_store_return_value): Likewise.
4523 * amd64-linux-tdep.c (amd64_linux_register_type): Likewise.
4524 * amd64-tdep.c (amd64_register_type): Likewise.
4525 * arm-tdep.c (arm_register_type): Likewise.
4526 * avr-tdep.c (avr_register_type): Likewise.
4527 * cris-tdep.c (cris_register_type, crisv32_register_type): Likewise.
4528 * frv-tdep.c (frv_register_type): Likewise.
4529 * h8300-tdep.c h8300_register_type): Likewise.
4530 * hppa-tdep.c (hppa64_push_dummy_call, hppa32_register_type,
4531 hppa64_register_type): Likewise.
4532 * i386-tdep.c (i386_mmx_type, i386_sse_type): Likewise.
4533 * iq2000-tdep.c (iq2000_register_type): Likewise.
4534 * lm32-tdep.c (lm32_register_type, lm32_push_dummy_call): Likewise.
4535 * m32r-tdep.c (m32r_register_type): Likewise.
4536 * m68hc11-tdep.c (m68hc11_register_type, m68hc11_pseudo_register_read,
4537 m68hc11_pseudo_register_write): Likewise.
4538 * m68k-tdep.c (m68k_register_type): Likewise.
4539 * m88k-tdep.c (m88k_register_type, m88k_store_arguments): Likewise.
4540 * mep-tdep.c (mep_register_type): Likewise.
4541 * mips-tdep.c (mips_register_type, mips_pseudo_register_type,
4542 mips_print_fp_register): Likewise.
4543 * moxie-tdep.c (moxie_register_type): Likewise.
4544 * mt-tdep.c (mt_copro_register_type, mt_register_type): Likewise.
4545 * rs6000-tdep.c (rs6000_builtin_type_vec64,
4546 rs6000_builtin_type_vec128): Likewise.
4547 * score-tdep.c (score_register_type): Likewise.
4548 * sparc-tdep.c (sparc32_register_type, sparc32_store_arguments):
4550 * sparc64-tdep.c (sparc64_register_type, sparc64_store_arguments):
4552 * spu-tdep.c (spu_builtin_type_vec128, spu_register_type): Likewise.
4553 * v850-tdep.c (v850_register_type): Likewise.
4554 * xstormy16-tdep.c (xstormy16_register_type): Likewise.
4555 * xtensa-tdep.c (xtensa_register_type): Likewise.
4557 * mt-tdep.c (struct gdbarch_tdep): New data structure.
4558 (mt_gdbarch_init): Alloc TDEP structures.
4559 (mt_register_type): Cache coprocessor type in TDEP instead of
4560 static global variable.
4562 * xtensa-tdep.h (struct gdbarch_tdep): Add type_entries member.
4563 * xtensa-tdep.c (type_entries): Remove.
4564 (xtensa_register_type): Cache fixed-size types in TDEP instead
4565 of in global variable.
4567 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4569 * gdbtypes.h (builtin_type_true_char): Remove.
4570 (builtin_type_true_unsigned_char): Likewise.
4571 (struct builtin_type): Add builtin_true_char and
4572 builtin_true_unsigned_char members.
4573 * gdbtypes.c (builtin_type_true_char): Remove.
4574 (builtin_type_true_unsigned_char): Likewise.
4575 (_initialize_gdbtypes): Do not initialize them.
4576 (gdbtypes_post_init): Initialize builtin_true_char and
4577 builtin_true_unsigned_char members of builtin_type.
4579 * printcmd.c (print_scalar_formatted): Use builtin_type
4580 members instead of builtin_type_true_char and
4581 builtin_type_true_unsigned_char.
4582 * ada-valprint.c (ada_val_print_1): Likewise.
4584 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4586 * gdbtypes.h (builtin_type_void): Remove.
4587 * gdbtypes.c (builtin_type_void): Remove.
4588 (_initialize_gdbtypes): Do not initialize it.
4590 (safe_parse_type): Add GDBARCH argument. Use it to construct
4592 (check_stub_method): Update call.
4594 * infcall.c (call_function_by_hand): Use platform-specific type
4595 instead of builtin_type_void.
4596 * valops.c (value_cast): Use input void type instead of
4599 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4601 * ada-lang.c (assign_component): Use platform-specific integer type
4602 instead of builtin_type_int32 type.
4603 (ada_evaluate_subexp) [OP_ATR_SIZE]: Likewise.
4605 * ax-gdb.c (gen_expr) [UNOP_NEG]: Use platform-specific integer type
4606 instead of builtin_type_int8 type.
4607 * valarith.c (value_x_unop): Likewise.
4608 * python/python-value.c (valpy_absolute): Avoid reference to
4609 builtin_type_int8 type.
4611 * eval.c (evaluate_subexp_standard): Use platform-specific integer
4612 type instead of builtin_type_int8 as EVAL_SKIP return value type.
4613 * ada-lang.c (ada_evaluate_subexp): Likewise.
4614 * jv-lang.c (evaluate_subexp_java): Likewise.
4615 * m2-lang.c (evaluate_subexp_modula2): Likewise.
4616 * scm-lang.c (evaluate_exp): Likewise.
4618 * value.h (value_bitstring): Add INDEX_TYPE argument.
4619 * valops.c (value_bitstring): Add INDEX_TYPE argument, use it instead
4620 of builtin_type_int32 as base range type.
4621 * eval.c (evaluate_subexp_standard): Update value_bitstring call.
4623 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4625 * gdbtypes.c (lookup_array_range_type): Add prototype.
4626 (lookup_string_range_type): Likewise.
4627 * gdbtypes.c (lookup_array_range_type): New function.
4628 (lookup_string_range_type): Likewise.
4630 * ax-gdb.c (gen_repeat): Use lookup_array_range_type.
4631 * parse.c (follow_types): Likewise.
4632 * jv-lang.c (java_array_type): Likewise.
4633 * gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
4634 * mt-tdep.c (mt_register_type): Likewise.
4635 * sh-tdep.c (sh_sh4_build_float_register_type): Likewise.
4636 * sh64-tdep.c (sh64_build_float_register_type): Likewise.
4637 * value.c (allocate_repeat_value): Likewise.
4638 * valops.c (value_array, value_cstring): Likewise.
4639 * valops.c (value_string): Use lookup_string_range_type.
4641 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4643 * m2-typeprint.c (m2_print_bounds, m2_is_long_set_of_type): Remove
4644 redundant check for NULL TYPE_TARGET_TYPE.
4645 * m2-valprint.c (m2_print_long_set): Likewise.
4646 * p-valprint.c (pascal_type_print_base): Likewise.
4648 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4650 * printcmd.c (next_gdbarch): New static variable.
4651 (set_next_address, do_examine, x_command): Set it.
4652 (decode_format): Use 'a' size to indicate width of an address.
4653 (do_examine): Add GDBARCH argument. Handle 'a' size.
4654 (x_command): Pass architecture to do_examine.
4655 Error if called without argument the first time.
4656 (do_one_display): Pass architecture to do_examine.
4658 (examine_i_type, examine_b_type, examine_h_type, examine_w_type,
4659 examine_g_type): Remove.
4660 (_initialize_printcmd): Do not initialize them.
4661 (do_examine): Use builin_type_int... instead of examine_..._type.
4663 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4665 * gdbtypes.h (struct builtin_type): Add internal_fn member.
4666 * gdbtypes.c (gdbtypes_post_init): Initialize it.
4667 * value.c (internal_fn_type): Remove.
4668 (_initialize_values): Do not initialize it.
4670 * value.c (struct internalvar): Add enum internalvar_kind type and
4671 kind member. Restructure union internalvar_data type. Remove type,
4672 canonical, and make_value members.
4673 (init_if_undefined_command): Update for data structure changes.
4674 (create_internalvar): Likewise.
4675 (create_internalvar_type_lazy): Likewise.
4676 (get_internalvar_integer): Likewise.
4677 (get_internalvar_function): Likewise.
4678 (set_internalvar_component): Likewise.
4679 (set_internalvar): Likewise.
4680 (set_internalvar_integer): Likewise.
4681 (set_internalvar_function): Likewise.
4682 (clear_internalvar): Likewise.
4683 (add_internal_function): Likewise.
4684 (preserve_one_internalvar): New function.
4685 (preserve_values): Call it.
4687 * value.h (value_of_internalvar): Add GDBARCH parameter.
4688 (internalvar_make_value): Likewise.
4689 * value.c (value_of_internalvar): Add GDBARCH parameter. Pass it to
4690 make_value callback. Use it to generate per-architecture result value
4691 types for internal variables with no pre-defined type. Update for data
4693 (show_convenience): Pass architecture to value_of_internalvar.
4694 * eval.c (evaluate_subexp_standard): Likewise.
4695 * infrun.c (siginfo_make_value): Add GDBARCH parameter. Use it
4696 instead of current frame architecture. Return per-architecture type.
4698 * value.h (set_internalvar_string): Add prototype.
4699 * value.c (set_internalvar_string): New function.
4700 * tracepoint.c (set_traceframe_context): Use it.
4702 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
4704 * jv-lang.h (java_int_type, java_byte_type, java_short_type,
4705 java_long_type, java_boolean_type, java_char_type, java_float_type,
4706 java_double_type, java_void_type): Remove.
4707 (struct builtin_java_type): New data type.
4708 (builtin_java_type): Add prototype.
4709 (java_primitive_type): Add GDBARCH argument.
4710 (java_primitive_type_from_name): Likewise.
4711 (type_from_class): Likewise.
4713 * jv-lang.c (java_int_type, java_byte_type, java_short_type,
4714 java_long_type, java_boolean_type, java_char_type, java_float_type,
4715 java_double_type, java_void_type): Remove.
4717 (build_java_types, builtin_java_type): New functions.
4718 (java_type_data): New static variable.
4719 (_initialize_java_language): Initialize it. No longer initialize
4721 (java_language_arch_info): Use per-architecture types.
4723 (java_primitive_type): Add GDBARCH argument. Return per-architecture
4724 type instead of refering to global variable.
4725 (java_primitive_type_from_name): Add GDBARCH argument.
4726 (java_primitive_type_name): New function.
4727 (java_demangled_signature_length): Use it instead of
4728 java_primitive_type_from_name.
4729 (java_demangled_signature_copy): Likewise.
4731 (type_from_class): Add GDBARCH argument. Pass to java_link_class_type,
4732 java_primitive_type, and recursive type_from_class call.
4733 (java_link_class_type): Add GDBARCH argument. Pass to type_from_class
4734 calls. Use per-architecture types instead of global types.
4736 * jv-exp.y (parse_java_type): New define.
4737 Use per-architecture types instead of global types througout.
4739 * jv-valprint.c (java_value_print): Pass architecture to
4740 type_from_class and java_primitive_type_from_name. Use per-
4741 architecture types instead of global types.
4743 2009-07-01 Doug Evans <dje@google.com>
4745 * NEWS: Mention biarch amd64-linux gdbserver and hardware watchpoint
4746 support for i386-linux, amd64-linux, and i386-win32 builds of
4749 2009-07-01 Nick Roberts <nickrob@snap.net.nz>
4751 * Makefile.in (HFILES_NO_SRCDIR): Remove entries for deleted files.
4753 2009-06-30 Jan Kratochvil <jan.kratochvil@redhat.com>
4755 * Makefile.in (TARGET_FLAGS_TO_PASS): Include also FORCE_PARALLEL.
4756 (check//%): Construct FORCE_PARALLEL for the sub-make. Extend the
4759 2009-06-30 Paul Pluzhnikov <ppluzhnikov@google.com>
4762 * dwarf2-frame.c (dwarf2_frame_state): Move cfa_offset, cfa_reg,
4763 cfa_how and cfa_exp into regs and adjust users.
4765 2009-06-30 Daniel Jacobowitz <dan@codesourcery.com>
4767 * dwarf2read.c (inherit_abstract_dies): Work around GCC PR 40573.
4769 2009-06-30 Vladimir Prus <vladimir@codesourcery.com>
4771 * mi/mi-cmd-stack.c (parse_print_values): New.
4772 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args): Use the above.
4774 2009-06-30 Vladimir Prus <vladimir@codesourcery.com>
4776 * varobj.c (varobj_get_type): Use type_to_string.
4778 2009-06-29 Pedro Alves <pedro@codesourcery.com>
4780 * infrun.c (handle_inferior_event): Context switch to the new
4781 thread when resuming for a new_thread_event.
4783 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4785 * ada-lang.h (ada_convert_actual): Add GDBARCH argument.
4786 * ada-lang.c (convert_actual): Remove stale prototype.
4787 (ensure_lval, make_array_descriptor, ada_convert_actual):
4788 Add GDBARCH argument and pass through to subroutine calls.
4789 (ensure_lval): Use GDBARCH instead of current_gdbarch.
4790 * infcall.c (value_arg_coerce): Update ada_convert_actual call.
4792 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4794 * ada-lang.c (resolve): Use per-architecture void type instead
4795 of platform-independent one.
4796 (ada_evaluate_subexp) [STRUCTOP_STRUCT]: Likewise.
4797 (ada_resolve_function): Reimplement fallback logic to avoid
4798 explicit reference to builtin_type_void.
4800 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4802 * ada-valprint.c (ada_print_scalar): Accept NULL type argument
4803 to indicate scalar should be printed as default integer.
4804 (print_optional_low_bound): Pass NULL to ada_print_scalar to
4805 indicate default integer output.
4806 * ada-typeprint.c (print_range, print_range_bound): Likewise.
4807 (print_choices): Likewise. Thus, accept NULL as val_type.
4808 * ada-lang.c (ada_variant_discrim_type): Return NULL when failed
4809 to look up controlling discriminant name.
4811 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4813 * ada-lang.c (to_fixed_range_type): Add ORIG_TYPE argument.
4814 Fall back to orig_type as index type if symbol lookup fails.
4815 Allocate result types from ORIG_TYPE's objfile.
4816 (ada_array_bound_from_type, to_fixed_array_type,
4817 ada_evaluate_subexp): Pass original index type to
4818 to_fixed_range_type. Do not pass objfile.
4820 * ada-typeprint.c (print_range_type_named): Add ORIG_TYPE argument.
4821 Fall back to orig_type as index type if symbol lookup fails.
4822 (print_array_type, ada_print_type): Pass original index type
4823 to print_range_type_named.
4825 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4827 * ada-lang.c (ada_index_type): Update comment.
4829 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4831 * ada-lang.c (ada_index_type): Make static. Add NAME argument.
4832 Throw error on invalid input arguments. Return NULL if unable
4833 to determine index type.
4835 (ada_array_bound_from_type): Remove TYPEP argument.
4836 (ada_array_bound): Make static. Return LONGEST instead of value.
4837 Update for ada_array_bound_from_type change.
4838 (ada_array_length): Return LONGEST instead of value.
4839 Update for ada_array_bound_from_type change.
4840 (make_array_descriptor): Update for ada_array_bound change.
4842 (ada_evaluate_subexp) [OP_ATR_RANGE, OP_ATR_FIRST, OP_ATR_LAST,
4843 OP_ATR_LENGTH]: Update for ada_array_bound_from_type,
4844 ada_array_bound, ada_array_length, ada_index_type changes.
4845 Always use ada_index_type to compute result type; fall back
4846 to architecture-specific integer type if ada_index_type fails.
4848 * ada-lang.h (ada_index_type): Remove prototype.
4849 (ada_array_bound): Likewise.
4851 2009-06-29 Pedro Alves <pedro@codesourcery.com>
4853 * dbxread.c (read_dbx_symtab): Clear has_line_numbers when ending
4856 2009-06-29 Tom Tromey <tromey@redhat.com>
4858 * README: Mention parallel check.
4860 2009-06-29 Sami Wagiaalla <swagiaal@redhat.com>
4862 * dwarf2read.c (read_import_statement): Properly set import location
4864 * cp-support.h (cp_add_using, cp_add_using_directive): Now take char*
4865 inner, char* outer arguments. Updated callers.
4867 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4869 * value.h (value_subscript, value_subscripted_rvalue,
4870 value_bitstring_subscript, value_ptradd): Use LONGEST instead
4871 of value as type of the index argument.
4872 (value_ptrsub): Remove.
4873 * valarith.c (value_subscript, value_subscripted_rvalue,
4874 value_bitstring_subscript, value_ptradd): Use LONGEST instead
4875 of value as type of the index argument.
4876 (value_ptrsub): Remove.
4878 * wrapper.h (gdb_value_subscript): Use LONGEST instead of
4879 value as type of the index argument.
4880 * wrapper.c (gdb_value_subscript): Likewise.
4882 Update calls to gdb_value_subscript, value_subscript,
4883 value_subscripted_rvalue, value_bitstring_subscript and
4884 value_ptradd to use LONGEST instead of value as index
4885 argument type. Use value_ptradd instead of value_ptrsub.
4886 * ada-lang.c (ada_value_subscript, ada_value_ptr_subscript,
4887 ada_tag_name_2): Update.
4888 * ada-tasks.c (read_atcb): Update.
4889 * eval.c (evaluate_subexp_standard): Update.
4890 * valarith.c (value_subscript): Update.
4891 * gnu-v2-abi.c (gnuv2_virtual_fn_field): Update.
4892 * gnu-v3-abi.c (gnuv3_get_virtual_fn, gnuv3_baseclass_offset,
4893 gnuv3_method_ptr_to_value): Update.
4894 * jv-lang.c (evaluate_subexp_java): Update.
4895 * m2-lang.c (evaluate_subexp_modula2): Update.
4896 * python/python-value.c (valpy_getitem, valpy_binop): Update.
4897 * wrapper.c (gdb_value_subscript): Update.
4898 * varobj.c (c_describe_child): Update.
4900 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4902 * gdbtypes.h (make_function_type): Remove OBJFILE parameter.
4903 * gdbtypes.c (make_function_type): Remove OBJFILE parameter.
4904 (lookup_function_type): Update call.
4905 * stabsread.c (read_type): Likewise.
4906 * dwarf2read.c (read_subroutine_type): Use lookup_function_type
4907 instead of make_function_type.
4908 * jv-lang.c (type_from_class): Likewise. Do not allocate types
4909 on the fake "dynamics" obstack.
4911 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4913 * gdbtypes.h (struct builtin_type): Remove builtin_core_addr,
4914 nodebug_text_symbol, nodebug_data_symbol, nodebug_unknown_symbol,
4915 and nodebug_tls_symbol members.
4916 (struct objfile_type): New data structure.
4917 (objfile_type): Add prototype.
4918 * gdbtypes.c (gdbtypes_post_init): Remove initialization code
4919 for types no longer in struct builtin_type.
4920 (objfile_type_data): New static variable.
4921 (_initialize_gdbtypes): Initialize it.
4922 (objfile_type): New function.
4924 * gdbtypes.h (builtin_type_error): Remove.
4925 * gdbtypes.c (build_complex): Do not use builtin_type_error.
4926 * symtab.c (builtin_type_error): Remove.
4927 (_initialize_symtab): Remove initialization.
4929 * stabsread.c (dbx_lookup_type, define_symbol, error_type,
4930 rs6000_builtin_type, read_range_type): Use per-objfile types
4931 instead of global or per-architecture builtin types.
4932 * coffread.c (decode_type): Likewise.
4933 * dwarf2read.c (read_array_type, read_tag_string_type,
4934 new_symbol, die_type): Likewise.
4935 * mdebugread.c (parse_symbol, basic_type, upgrade_type,
4936 parse_procedure, psymtab_to_symtab_1): Likewise.
4937 * xcoffread.c (process_xcoff_symbol): Likewise.
4938 * parse.c (write_exp_msymbol): Likewise.
4940 * stabsread.c (rs6000_builtin_type_data): New static variable.
4941 (_initialize_stabsread): Initialize it.
4942 (rs6000_builtin_type): Add OBJFILE argument. Allocate builtin
4943 types per-objfile instead of globally.
4945 * stabsread.c (dbx_lookup_type): Add OBJFILE argument. Use it
4946 instead of current_objfile; pass it to rs6000_builtin_type.
4947 (dbx_alloc_type, read_type, read_range_type): Update calls.
4948 (cleanup_undefined_types_noname): Add OBJFILE argument and
4949 pass it to dbx_lookup_type.
4950 (cleanup_undefined_types): Add OBJFILE argument and pass it
4951 to cleanup_undefined_types_noname.
4952 * stabsread.h (cleanup_undefined_types): Add OBJFILE argument.
4953 * buildsym.c (end_symtab): Update call.
4955 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4957 * darwin-nat-info.c (darwin_debug_regions_recurse): Use
4958 target_gdbarch instead of current_gdbarch.
4960 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
4962 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-windows-tdep.o.
4963 (ALL_TARGET_OBS): Add moxie-tdep.o, i386-darwin-tdep.o, and
4966 * configure.tgt: Add comment.
4968 2009-06-28 Paul Pluzhnikov <ppluzhnikov@google.com>
4970 * mi/mi-cmds.c (mi_cmds): Remove unimplemented entries.
4972 2009-06-27 Daniel Jacobowitz <dan@codesourcery.com>
4973 Jan Kratochvil <jan.kratochvil@redhat.com>
4975 * NEWS: Document inlined function support.
4976 * Makefile.in (SFILES): Add inline-frame.c.
4977 (COMMON_OBS): Add inline-frame.o.
4978 * block.c (contained_in): Rewrite to use lexical nesting.
4979 (block_linkage_function): Skip inlined function blocks.
4980 (block_inlined_p): New.
4981 * block.h (struct block): Update comment.
4982 (block_inlined_p): New prototype.
4983 * blockframe.c (get_frame_block): Handle inlined functions.
4984 (get_frame_function): Do not use block_linkage_function.
4985 (block_innermost_frame): Use get_frame_block and contained_in.
4986 * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
4987 Skip over inlined functions. Simplify epilogue check.
4988 (bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
4990 (set_momentary_breakpoint): Only accept non-inlined frames.
4991 (watch_command_1): Use frame_unwind_caller_pc and
4992 frame_unwind_caller_id instead of get_prev_frame.
4993 (until_break_command): Likewise. Use get_stack_frame_id.
4994 * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
4995 * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
4996 * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
4997 (read_func_scope, new_symbol): Likewise. Handle arguments specially
4998 for inlined functions without call site information.
4999 (inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
5000 (die_specification): Treat DW_AT_abstract_origin as a specification.
5001 (read_type_die): Handle DW_TAG_inlined_subroutine.
5002 * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
5003 * frame.c (fprint_frame_id): Print inline depth.
5004 (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
5005 (skip_inlined_frames, get_stack_frame_id): New.
5006 (frame_unwind_caller_id): Use skip_inlined_frames.
5007 (frame_id_inlined_p): New.
5008 (frame_id_eq): Make the logic match the comments. Add inline_depth
5010 (frame_id_inner): Handle inlined functions.
5011 (frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
5012 (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
5013 (get_prev_frame_1): Check for inline frames. Split out frame
5014 allocation to get_prev_frame_raw.
5015 (get_prev_frame_raw): New function.
5016 (get_prev_frame): Handle inline frames.
5017 (get_frame_pc): Use frame_unwind_pc.
5018 (get_frame_address_in_block): Skip inlined frames on both sides.
5019 (pc_notcurrent): Delete.
5020 (find_frame_sal): Rewrite to handle inline call sites. Use
5021 get_frame_address_in_block.
5022 (deprecated_update_frame_pc_hack): Make static.
5023 * frame.h: Update comments.
5024 (struct frame_id): Add inline_depth.
5025 (enum frame_type): Add INLINE_FRAME.
5026 (frame_id_inlined_p, get_stack_frame_id): New prototypes.
5027 * gdbthread.h (struct thread_info): Add step_stack_frame_id field.
5028 * infcmd.c (set_step_frame): New function.
5029 (step_once): Use set_step_frame. Handle inlined functions.
5030 (until_next_command): Use set_step_frame.
5031 (finish_backward), finish_forward): Use get_stack_frame_id.
5032 (finish_command): Support inlined functions.
5033 * inferior.h (set_step_info): New prototype.
5034 * infrun.c (RESUME_ALL): Use minus_one_ptid.
5035 (clear_proceed_status): Clear step_stack_frame_id.
5036 (init_wait_for_inferior): Call clear_inline_frame_state.
5037 (init_execution_control_state): Make static.
5038 (set_step_info): New function.
5039 (init_thread_stepping_state): Do not set the symtab or line here.
5040 (stepped_in_from): New function.
5041 (handle_inferior_event): Handle inlined functions. Use set_step_info.
5042 (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
5043 (struct inferior_status): Add step_stack_frame_id.
5044 (save_inferior_status, restore_inferior_status): Save and restore
5045 step_stack_frame_id.
5046 * inline-frame.c, inline-frame.h: New files.
5047 * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
5048 * regcache.c (regcache_write_pc): Call reinit_frame_cache.
5049 * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
5050 * stack.c (frame_show_address): New.
5051 (print_frame_info, print_frame): Use it.
5052 (find_frame_funname): Use get_frame_function. Handle inlined blocks.
5053 (frame_info): Mark inlined functions.
5054 (backtrace_command_1): Use get_current_user_frame.
5055 (print_frame_local_vars, print_frame_label_vars): Update comments.
5056 (return_command): Refuse inlined functions.
5057 * symtab.c (lookup_symbol_aux_local): Stop at inlined function
5059 (find_function_start_sal): Avoid inlined functions.
5060 (completion_list_add_fields): New function.
5061 (default_make_symbol_completion_list): Use it. Use block_static_block
5062 and block_global_block. Check for inlined functions.
5063 (skip_prologue_using_sal): Avoid line number comparison across
5065 * symtab.h (struct symbol): Add is_inlined.
5066 (SYMBOL_INLINED): New.
5067 * target.c (target_resume): Call clear_inline_frame_state.
5068 * valops.c (value_of_variable): Check block_inlined_p.
5070 2009-06-27 Daniel Jacobowitz <dan@codesourcery.com>
5072 * frame.c (frame_unwind_id): Renamed to ...
5073 (frame_unwind_caller_id): ... this. All callers updated.
5074 (frame_pc_unwind): Renamed to ...
5075 (frame_unwind_caller_pc): ... this. All callers updated.
5076 * frame.h: Document frame_unwind_caller_WHAT functions.
5077 (frame_unwind_id): Renamed to ...
5078 (frame_unwind_caller_id): ... this.
5079 (frame_pc_unwind): Renamed to ...
5080 (frame_unwind_caller_pc): ... this.
5081 * hppa-tdep.c (hppa_find_unwind_entry_in_block): Correct comment.
5082 * stack.c (parse_frame_specification_1): Do not rely on
5085 2009-06-27 Michael Snyder <msnyder@vmware.com>
5087 * infrun.c (handle_inferior_event): Improve handling of
5088 reverse-stepping into and over shared library functions.
5090 2009-06-25 Karen Osmond <karen.osmond@gmail.com>
5092 * linespec.c (find_method): Add new not_found_ptr parameter to
5093 bring in line with symtab_from_filename, decode_variable.
5094 (decode_compound): Likewise. Also propagate not_found_ptr to
5096 (decode_line_1): Propagate not_found_ptr to decode_compound.
5097 (cplusplus_error): Now throws NOT_FOUND_ERROR.
5099 2009-06-25 Karen Osmond <karen.osmond@gmail.com>
5101 * MAINTAINERS (Write After Approval): Add self.
5103 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
5105 * valops.c (value_one): Reimplement broken decimal-float case.
5107 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
5109 * eval.c (evaluate_subexp_standard): Use expression architecture
5110 instead of current_gdbarch.
5112 * infrun.c (handle_inferior_event): Avoid unncessary reference
5113 to current_gdbarch and get_current_frame ().
5115 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
5117 * breakpoint.h (set_longjmp_breakpoint): Add THREAD argument.
5118 (enum bptype): Add bp_longjmp_master.
5120 * breakpoint.c (create_longjmp_master_breakpoint): New function.
5121 (update_breakpoints_after_exec): Handle bp_longjmp_master
5122 breakpoints. Call create_longjmp_master_breakpoint.
5123 (print_it_typical, bpstat_stop_status, bpstat_what,
5124 print_one_breakpoint_location, allocate_bp_location, mention,
5125 delete_command, breakpoint_re_set_one): Handle bp_longjmp_master.
5126 (breakpoint_re_set): Call create_longjmp_master_breakpoint.
5127 (create_longjmp_breakpoint): Delete.
5128 (set_longjmp_breakpoint): Add THREAD argument. Reimplement
5129 to install momentary clones of bp_longjmp_master breakpoints.
5131 * infcmd.c (step_1): Pass thread to set_longjmp_breakpoint.
5133 2009-06-23 Cary Coutant <ccoutant@google.com>
5135 * dwarf2read.c (dwarf_decode_lines): Ignore rows where is_stmt is 0.
5136 Set basic_block to 0 after a special opcode.
5138 2009-06-23 Jan Kratochvil <jan.kratochvil@redhat.com>
5140 Fix a regression by the mmap patch from 2009-06-16.
5141 * symfile.c (reread_symbols): Move sym_finish and clear_objfile_data
5142 calls before deleting the OBJFILE obstack. Extend the comment.
5144 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
5146 * jv-lang.h (JAVA_OBJECT_SIZE): Remove.
5147 (get_java_object_header_size): Add GDBARCH parameter.
5148 * jv-lang.c (get_java_object_header_size): Add GDBARCH parameter.
5149 Use it instead of current_gdbarch.
5150 (evaluate_subexp_java): Replace JAVA_OBJECT_SIZE with call to
5151 get_java_object_header_size.
5152 * jv-valprint.c (java_value_print): Likewise.
5154 2009-06-23 Sami Wagiaalla <swagiaal@redhat.com>
5156 * dwarf2read.c (process_die): Handle import statements
5157 (DW_TAG_imported_declaration, case DW_TAG_imported_module)
5158 (read_import_statement): New.
5159 (read_func_scope): Update using_directives to point to current context
5160 (read_lexical_block_scope): Ditto.
5161 * cp-support.h: Added prototype for cp_add_using.
5162 * cp-namespace.c: Removed local context_stack.
5163 (cp_initialize_namespace): Deleted.
5164 (cp_finalize_namespace): Deleted.
5165 (cp_add_using_directive): Use using_directives instead of using_list.
5166 (cp_add_using): No longer static.
5167 * buildsym.h: Created global using_direct variable.
5168 Created using_direct variable in context_stack.
5169 * buildsym.c (finish_block): Set using directives for the block under
5171 (start_symtab): Removed call to cp_initialize_namespace().
5172 (end_symtab): Removed call to cp_finalize_namespace().
5173 (push_context): Save and reset using_directives.
5174 * block.c (block_using): Return using directives for given
5175 block instead of static block.
5177 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
5179 * target-descriptions.h (struct type): Do not declare.
5180 (struct tdesc_type): Declare.
5181 (tdesc_named_type): Change return type to struct tdesc_type *.
5182 (tdesc_record_type): Remove.
5183 (tdesc_create_vector): Add prototype.
5184 (tdesc_create_union): Likewise.
5185 (tdesc_add_field): Likewise.
5187 * target-descriptions.c (struct tdesc_reg): Replace gdb_type
5188 member by tdesc_type member.
5189 (struct tdesc_type_field, tdesc_type_field): Add type and vector def.
5190 (struct tdesc_type, tdesc_type_p): Likewise.
5191 (struct tdesc_arch_reg, tdesc_arch_reg): Likewise.
5192 (struct tdesc_feature): Change type of "types" to VEC(tdesc_type_p).
5193 (struct tdesc_arch_data): Replace registers member by arch_regs.
5195 (tdesc_predefined_types): Change to array of pre-defined
5196 struct tdesc_type structures. Add "code_ptr" and "data_ptr".
5197 (tdesc_named_type): Return struct tdesc_type * instead of GDB type.
5198 (tdesc_gdb_type): New function.
5200 (target_find_description): Update for data structure changes.
5201 (tdesc_data_cleanup): Likewise.
5202 (tdesc_numbered_register): Likewise.
5203 (tdesc_use_registers): Likewise.
5204 (tdesc_create_reg): Likewise.
5206 (tdesc_find_arch_register): New function.
5207 (tdesc_find_register): Use it.
5208 (tdesc_register_type): Use tdesc_gdb_type to generate GDB type from
5209 tdesc_type on demand; cache generated types in tdesc_arch_reg.
5211 (tdesc_free_type): New function.
5212 (tdesc_free_feature): Call it.
5214 (tdesc_create_vector): New function.
5215 (tdesc_create_union): Likewise.
5216 (tdesc_add_field): Likewise.
5217 (tdesc_record_type): Remove.
5219 (tdesc_type_id): Remove.
5220 (maint_print_c_tdesc_cmd): Update for data structure changes. Update
5221 generated code to create tdesc_type structures instead of GDB types.
5223 * xml-tdesc.c: Do not include "gdbtypes.h".
5224 (struct tdesc_parsing_data): Change type of current_union to
5225 struct tdesc_type *.
5226 (tdesc_start_reg): Do not special-case "code_ptr" or "data_ptr".
5227 (tdesc_start_union): Call tdesc_create_union.
5228 (tdesc_start_field): Call tdesc_add_field.
5229 (tdesc_start_vector): Call tdesc_create_vector.
5230 (tdesc_end_union): Remove.
5231 (feature_children): Remove reference to tdesc_end_union.
5233 * features/arm-with-iwmmxt.c: Regenerate.
5234 * features/mips-linux.c: Regenerate.
5235 * features/mips64-linux.c: Regenerate.
5236 * features/rs6000/powerpc-32.c: Regenerate.
5237 * features/rs6000/powerpc-32l.c: Regenerate.
5238 * features/rs6000/powerpc-403.c: Regenerate.
5239 * features/rs6000/powerpc-403gc.c: Regenerate.
5240 * features/rs6000/powerpc-505.c: Regenerate.
5241 * features/rs6000/powerpc-601.c: Regenerate.
5242 * features/rs6000/powerpc-602.c: Regenerate.
5243 * features/rs6000/powerpc-603.c: Regenerate.
5244 * features/rs6000/powerpc-604.c: Regenerate.
5245 * features/rs6000/powerpc-64.c: Regenerate.
5246 * features/rs6000/powerpc-64l.c: Regenerate.
5247 * features/rs6000/powerpc-7400.c: Regenerate.
5248 * features/rs6000/powerpc-750.c: Regenerate.
5249 * features/rs6000/powerpc-860.c: Regenerate.
5250 * features/rs6000/powerpc-altivec32.c: Regenerate.
5251 * features/rs6000/powerpc-altivec32l.c: Regenerate.
5252 * features/rs6000/powerpc-altivec64.c: Regenerate.
5253 * features/rs6000/powerpc-altivec64l.c: Regenerate.
5254 * features/rs6000/powerpc-e500.c: Regenerate.
5255 * features/rs6000/powerpc-e500l.c: Regenerate.
5256 * features/rs6000/powerpc-isa205-32l.c: Regenerate.
5257 * features/rs6000/powerpc-isa205-64l.c: Regenerate.
5258 * features/rs6000/powerpc-isa205-altivec32l.c: Regenerate.
5259 * features/rs6000/powerpc-isa205-altivec64l.c: Regenerate.
5260 * features/rs6000/powerpc-isa205-vsx32l.c: Regenerate.
5261 * features/rs6000/powerpc-isa205-vsx64l.c: Regenerate.
5262 * features/rs6000/powerpc-vsx32.c: Regenerate.
5263 * features/rs6000/powerpc-vsx32l.c: Regenerate.
5264 * features/rs6000/powerpc-vsx64.c: Regenerate.
5265 * features/rs6000/powerpc-vsx64l.c: Regenerate.
5266 * features/rs6000/rs6000.c: Regenerate.
5268 2009-06-23 Joel Brobecker <brobecker@adacore.com>
5270 * ada-lang.c (decode_packed_array): If the value is a pointer to
5271 an array, then use value_ind to dereference it, not ada_value_ind.
5272 (ada_template_to_fixed_record_type_1): Handle the case where a
5273 dynamic field is an aligner type.
5274 (to_fixed_array_type): Add handling for packed array types.
5275 (ada_get_base_type): Do not follow the XVS type if the type is
5277 (ada_evaluate_subexp): Split a few statements up for clarity
5279 <OP_FUNCALL>: Add handling of the case of a packed array that
5280 has already been fixed.
5282 2009-06-23 Joel Brobecker <brobecker@adacore.com>
5284 * ada-lang.c (evaluate_subexp): Delete. Use the version from eval.c.
5285 (evaluate_subexp_type): Reimplement using evaluate_subexp.
5286 * value.h (evaluate_subexp): Add declaration.
5287 * eval.c (evaluate_subexp): Make non-static.
5288 * objc-lang.c (print_object_command): Use evaluate_subexp.
5290 2009-06-23 Paul Pluzhnikov <ppluzhnikov@google.com>
5292 Revert 2009-05-14 breakpoint commit (no longer needed).
5293 * breakpoint.h (breakpoint_re_set_objfile): Remove
5294 * breakpoint.c (breakpoint_re_set_objfile): Likewise
5295 (create_overlay_event_breakpoint): Remove objfile parameter,
5296 iterate over all objfiles.
5297 * objfiles.c (objfile_relocate): Update.
5298 * symfile.c (new_symfile_objfile): Likewise.
5300 2009-06-23 Tom Tromey <tromey@redhat.com>
5303 * c-lang.c (classify_type): Iterate over typedefs.
5304 * c-valprint.c (textual_element_type): Iterate over typedefs.
5306 2009-06-22 Tristan Gingold <gingold@adacore.com>
5308 * darwin-nat.c (darwin_xfer_partial): Use host_address_to_string
5311 2009-06-22 Jan Kratochvil <jan.kratochvil@redhat.com>
5314 * buildsym.c (block_compar): New function.
5315 (end_symtab): Replace the bubble sort by a qsort based code.
5317 2009-06-22 Sami Wagiaalla <swagiaal@redhat.com>
5319 * MAINTAINERS (Write After Approval): Add self.
5321 2009-06-22 Ulrich Weigand <uweigand@de.ibm.com>
5323 * spu-tdep.c (spu_get_longjmp_target): New function.
5324 (spu_gdbarch_init): Install it.
5326 2009-06-22 H.J. Lu <hongjiu.lu@intel.com>
5329 * remote.c (getpkt_or_notif_sane_1): Initialize val to -1.
5331 2009-06-21 Michael Snyder <msnyder@vmware.com>
5333 * inferior.h: Update ancient comment.
5335 2009-06-20 Aleksandar Ristovski <aristovski@qnx.com>
5336 Pedro Alves <pedro@codesourcery.com>
5338 * solib-svr4.c (IGNORE_FIRST_LINK_MAP_ENTRY): Avoid dereferencing
5340 (scan_dyntag): Skip if input bfd isn't elf flavoured.
5341 (locate_base): Call elf_locate_base even without an exec_bfd.
5343 2009-06-19 Samuel Bronson <naesten@gmail.com>
5346 * cli/cli-decode.c (apropos_cmd): Skip traversing abbreviations
5347 for prefix commands to avoid duplicates in the output.
5349 2009-06-19 Samuel Bronson <naesten@gmail.com>
5352 * cli/cli-decode.c (apropos_cmd): Fix avoidance of double
5355 2009-06-19 Jerome Guitton <guitton@adacore.com>
5357 * breakpoint.c (expand_line_sal_maybe): When explicit_line,
5358 skip prologue on each sals.
5359 (skip_prologue_sal): Return explicit_line and explicit_pc
5362 2009-06-19 Tristan Gingold <gingold@adacore.com>
5364 * darwin-nat.c (_initialize_darwin_inferior): Remove commented-out
5367 2009-06-19 Tristan Gingold <gingold@adacore.com>
5368 * machoread.c (macho_symtab_read): Adjust for bfd changes.
5369 * darwin-nat.h (struct darwin_exception_msg): New type to describe
5371 (struct private_thread_info): New type to describe the state of the
5373 (DEF_VEC_I thread_t): Removed, replaced by ...
5374 (DEF_VEC_O darwin_thread_t): ... this new type.
5375 (struct darwin_inferior): Renamed to ...
5376 (struct private_inferior): ... this type. Fields added.
5377 (darwin_not_port): Moved into the private inferior structure.
5378 * darwin-nat.c: Add includes, improve comments.
5379 Rewrite to handle multiple threads and processes.
5380 (darwin_resume_to): New function and protype.
5381 (darwin_resume, darwin_wait_to, darwin_wait): Ditto.
5382 (darwin_kill_inferior): Add ops argument.
5383 (darwin_pid_to_str): New function.
5384 (darwin_thread_alive): Ditto.
5385 (darwin_inf, darwin_not_port): Removed.
5386 (darwin_inf_fake_stop): New variable.
5387 (msgin, msgout, msg_state, exc_msg): Removed.
5388 (mach_check_error): Use warning instead of error.
5389 (darwin_ptrace): Adjust debug level.
5390 (cmp_thread_t): Fix names (typo).
5391 (darwin_check_new_threads): Argument is now an inferior,
5392 adjust for new structures, add no change check, ignore dead ports,
5393 handle first thread case.
5394 (find_inferior_task_it): New function.
5395 (find_inferior_notify_it): Ditto.
5396 (darwin_find_inferior_by_task): Ditto.
5397 (darwin_find_inferior_by_notify): Ditto.
5398 (darwin_find_thread): Ditto.
5399 (darwin_suspend_inferior): Ditto.
5400 (darwin_resume_inferior): Ditto.
5401 (catch_exception_raise_state): Removed.
5402 (catch_exception_raise_state_identity): Removed.
5403 (darwin_suspend_inferior_it): New function.
5404 (darwin_resume_inferior_it): Ditto.
5405 (darwin_dump_message): New function, extracted from darwin_wait.
5406 (darwin_decode_exception_message): New function.
5407 (darwin_encode_reply): New function.
5408 (catch_exception_raise): Removed.
5409 (darwin_send_reply): New function, extracted from darwin_resume.
5410 (darwin_resume_thread): New function, extracted from darwin_resume.
5411 (struct resume_inferior_threads_param): New type.
5412 (darwin_resume_inferior_threads_it): New function.
5413 (darwin_resume_inferior_threads): New function.
5414 (darwin_suspend_inferior_threads): New function.
5415 (darwin_resume): Mostly rewritten to handle multiple threads and
5417 (darwin_decode_message): New function extracted from darwin_wait.
5418 (cancel_breakpoint): New function.
5419 (darwin_wait): Mostly rewritten. Handle multiple threads.
5420 (darwin_mourn_inferior): Adjust for per process structures.
5421 (darwin_reply_to_all_pending_messages): New function.
5422 (darwin_stop_inferior): Adjust for per inferior structures.
5423 (darwin_attach_pid): Ditto.
5424 (darwin_init_thread_list): Ditto.
5425 (darwin_attach): Ditto.
5426 (darwin_detach): Ditto.
5427 (darwin_files_info): Now empty.
5428 (darwin_pid_to_str): Adjust returns string to match one expected by
5430 (darwin_read_write_inferior): Rename err variable to match other uses.
5431 Adjust debug message. Handle submaps.
5432 (darwin_xfer_memory): Adjust for per inferior structures.
5433 (set_enable_mach_exceptions): Ditto.
5434 (darwin_pid_to_exec_file): New function.
5435 (darwin_get_ada_task_ptid): Ditto.
5436 (darwin_supports_multi_process): Ditto.
5437 (_initialize_darwin_inferior): Remove useless assertion, adjust for
5438 per inferior structures. Add new target operations.
5440 2009-06-18 Hui Zhu <teawater@gmail.com>
5441 Michael Snyder <msnyder@vmware.com>
5443 * infrun.c (handle_inferior_event): Improve reverse stepping
5444 through function epilogue.
5446 * infrun.c (handle_inferior_event): Reverse-next through
5449 2009-06-18 Paul Pluzhnikov <ppluzhnikov@google.com>
5451 * dwarf2-frame.c (struct comp_unit): Use bfd_size_type for
5454 2009-06-17 Tom Tromey <tromey@redhat.com>
5456 * dwarf2read.c (zlib_decompress_section): Use a cleanup.
5458 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5460 * gdbarch.sh (pointer_to_address): Change to type 'm'.
5461 (address_to_pointer): Likewise.
5462 * gdbarch.c, gdbarch.h: Regenerate.
5464 * inferior.h (unsigned_pointer_to_address): Add GDBARCH argument.
5465 (signed_pointer_to_address): Likewise.
5466 (unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
5467 * findvar.c (unsigned_pointer_to_address): Likewise.
5468 (signed_pointer_to_address): Likewise.
5469 (unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
5471 * avr-tdep.c (avr_address_to_pointer): Likewise.
5472 (avr_pointer_to_address): Likewise.
5473 * iq2000-tdep.c (iq2000_pointer_to_address): Likewise.
5474 (iq2000_address_to_pointer): Likewise.
5475 * m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise.
5476 (m32c_m16c_pointer_to_address): Likewise.
5477 * spu-tdep.c (spu_pointer_to_address): Likewise.
5478 * xstormy16-tdep.c (xstormy16_pointer_to_address): Likewise.
5479 (xstormy16_address_to_pointer): Likewise.
5481 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5483 * printcmd.c (print_scalar_formatted): Always truncate
5484 unsigned data types.
5486 * cli-dump.c (struct callback_data): Change type of load_offset
5488 (restore_binary_file): Update type casts.
5489 (restore_command): Parse load_offset as address, not long.
5491 * utils.c (string_to_core_addr): Do not sign-extend value.
5492 * varobj.c (find_frame_addr_in_frame_chain): Truncate frame_base
5493 before comparing against requested frame address.
5495 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5497 * gdbarch.sh (gcore_bfd_target): New gdbarch callback.
5498 * gdbarch.h, gdbarch.c: Regenerate.
5500 * gcore.c (default_gcore_target): Make return value const.
5501 Call gdbarch_gcore_bfd_target if present.
5502 (default_gcore_arch, default_gcore_mach): Use target_gdbarch.
5504 * corelow.c (core_read_description): Call gdbarch_core_read_description
5505 on core_gdbarch instead of current_gdbarch.
5507 * ppc-linux-tdep.c (ppc_linux_init_abi): Install gcore_bfd_target.
5509 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5511 * gdbtypes.c (create_string_type): Receive character type as argument.
5512 * gdbtypes.h (create_string_type): Add character type argument.
5513 * dwarf2read.c (read_tag_string_type): Pass character type to
5516 * value.h (value_string): Add character type argument.
5517 * valops.c (value_string): Add character type argument. Pass it to
5518 create_string_type. Do not allocate space in inferior.
5519 * valarith.c (value_concat): Pass character type to value_string.
5521 * value.h (value_typed_string): Rename to ...
5522 (value_cstring): ... this.
5523 * valops.c (value_typed_string): Rename to ...
5524 (value_cstring): ... this.
5525 * c-lang.c (evaluate_subexp_c): Update.
5527 * python/python-value.c (builtin_type_pychar): New define.
5528 (convert_value_from_python): Call value_cstring instead
5529 of value_from_string.
5530 * value.c (value_from_string): Remove.
5531 * value.h (value_from_string): Remove.
5533 * eval.c (evaluate_subexp_standard): Pass character type to
5534 value_string. Pass expression architecture to value_nsstring
5535 and lookup_child_selector.
5536 * objc-lang.h (lookup_objc_class): Add GDBARCH parameter.
5537 (lookup_child_selector): Likewise.
5538 (value_nsstring): Likewise.
5539 * objc-lang.c (lookup_objc_class): Add GDBARCH parameter.
5540 Pass character type to value_string..
5541 (lookup_child_selector): Likewise.
5542 (value_nsstring): Add GDBARCH parameter, use it instead of
5543 objfile architecture. Pass architecture to lookup_objc_class
5544 and lookup_child_selector. Pass character type to value_string.
5545 (end_msglist): Pass architecture to lookup_objc_class.
5546 * objc-exp.y: Pass architecture to lookup_objc_class.
5548 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5550 * gdbtypes.h (struct language_defn): Add forward declaration.
5551 (lookup_typename): Add LANGUAGE and GDBARCH parameters.
5552 (lookup_unsigned_typename): Likewise.
5553 (lookup_signed_typename): Likewise.
5554 * gdbtypes.c (lookup_typename): Add LANGUAGE and GDBARCH parameters.
5555 Use them instead of current_language and current_gdbarch.
5556 (lookup_unsigned_typename): Add LANGUAGE and GDBARCH parameters.
5557 Pass them to lookup_typename.
5558 (lookup_signed_typename): Likewise.
5560 * c-exp.y: Pass parse_language and parse_gdbarch to
5561 lookup_unsigned_typename and lookup_signed_typename.
5562 * objc-exp.y: Likewise.
5563 * m2-exp.y: Pass parse_language and parse_gdbarch to lookup_typename.
5565 * c-lang.c (evaluate_subexp_c): Pass expression language and
5566 gdbarch to lookup_typename.
5567 * printcmd.c (printf_command): Pass current language and
5568 gdbarch to lookup_typename.
5569 * python/python-type.c (typy_lookup_typename): Likewise.
5570 Include "language.h".
5572 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5574 * sparc64-nat.c (sparc64_gregset_supplies_p): Add GDBARCH parameter.
5575 Use it instead of current_gdbarch. Pass architecture to
5576 sparc32_gregset_supplies_p.
5577 (sparc64_fpregset_supplies_p): Add GDBARCH parameter. Use it instead
5578 of current_gdbarch. Pass architecture to sparc32_fpregset_supplies_p.
5579 * sparc64nbsd-nat.c (sparc64nbsd_gregset_supplies_p,
5580 sparc64nbsd_fpregset_supplies_p): Likewise.
5581 * sparc-nat.c (sparc_gregset_supplies_p, sparc_fpregset_supplies_p):
5582 Add GDBARCH parameter.
5583 (sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
5584 (sparc_fetch_inferior_registers): Pass regcache architecture to
5585 sparc_gregset_supplies_p and sparc_fpregset_supplies_p.
5586 (sparc_store_inferior_registers): Likewise.
5587 * sparc-nat.h (sparc_gregset_supplies_p, sparc_fpregset_supplies_p:
5588 Add GDBARCH parameter.
5589 (sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
5591 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5593 * ada-tasks.c (read_known_tasks_array): Use target_gdbarch instead
5595 * aix-thread.c (pd_enable): Likewise.
5596 * amd64-linux-nat.c (ps_get_thread_area): Likewise.
5597 * bsd-uthread.c (bsd_uthread_activate): Likewise.
5598 * linux-nat.c (linux_nat_info_proc_cmd): Likewise.
5599 * linux-thread-db.c (enable_thread_event): Likewise.
5600 * monitor.c (monitor_write_memory, monitor_read_memory): Likewise.
5601 * nto-procfs.c (procfs_open): Likewise.
5602 * procfs.c (invalidate_cache, procfs_insert_watchpoint,
5603 info_proc_mappings, info_mappings_callback): Likewise.
5604 * record.c (record_open): Likewise.
5605 * rs6000-nat.c (ARCH64): Likewise.
5606 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
5607 (darwin_bfd_open): Likewise.
5608 * memattr.c (mem_info_command): Likewise.
5610 * windows-nat.c (win32_resume): Use current regcache architecture
5611 instead of current_gdbarch.
5613 * dbug-rom.c (dbug_regname): Remove check against number of
5614 registers in current_gdbarch.
5615 * solib-pa64.c (read_dynamic_info): Remove unused variable.
5617 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5619 * dummy-frame.c (deprecated_pc_in_call_dummy): Add GDBARCH parameter,
5620 use it instead of current_gdbarch.
5621 * frame.h (deprecated_pc_in_call_dummy): Add GDBARCH parameter.
5622 * arm-tdep.c (arm_skip_prologue): Pass architecture to
5623 deprecated_pc_in_call_dummy.
5625 * symtab.c (skip_prologue_using_sal): Add GDBARCH parameter.
5626 Use it instead of current_gdbarch.
5627 * symtab.h (skip_prologue_using_sal): Add GDBARCH parameter.
5628 * breakpoint.c (expand_line_sal_maybe): Pass architecture to
5629 skip_prologue_using_sal.
5630 * arm-tdep.c (skip_prologue_using_sal): Likewise.
5631 * lm32-tdep.c (lm32_skip_prologue): Likewise.
5632 * m32-tdep.c (m32c_skip_prologue): Likewise.
5633 * mips-tdep.c (mips_skip_prologue): Likewise.
5634 * moxie-tdep.c (moxie_skip_prologue): Likewise.
5635 * mt-tdep.c (mt_frame_unwind_cache): Likewise.
5636 * rs6000-tdep.c (rs6000_skip_prologue): Likewise.
5637 * frv-tdep.c (frv_analyze_prologue): Add GDBARCH parameter, pass
5638 it to skip_prologue_using_sal. Update call sites ...
5639 (frv_skip_prologue, frv_frame_unwind_cache): ... here.
5641 * mn10300-tdep.c (struct mn10300_prologue): Add GDBARCH member.
5642 (check_for_saved): Use it instead of current_gdbarch.
5643 (mn10300_analyze_prologue): Set it.
5645 * value.c (using_struct_return): Add GDBARCH parameter. Use it
5646 instead of current_gdbarch.
5647 * value.h (using_struct_return): Add GDBARCH parameter.
5648 * eval.c (evaluate_subexp_standard): Pass architecture to
5649 using_struct_return.
5650 * infcall.c (call_function_by_hand): Likewise.
5651 * stack.c (return_command): Likewise.
5652 * sparc-tdep.c (sparc32_push_dummy_code): Likewise.
5654 * symtab.c (in_prologue): Add GDBARCH parameter. Use it instead of
5656 * symtab.h (in_prologue): Add GDBARCH parameter.
5657 * infrun.c (handle_inferior_event): Pass architecture to in_prologue.
5659 * eval.c (evaluate_subexp_standard): Use expression architecture
5660 instead of current_gdbarch.
5662 * c-lang.c (evaluate_subexp_c): Use expression architecture and
5663 language instead of current_gdbarch and current_language.
5665 * printcmd.c (do_one_display): Use expression architecture instead
5668 * infcmd.c (print_return_value): Use architecture of stop_regcache
5669 instead of current_gdbarch.
5670 (print_vector_info, print_float_info): Remove GDBARCH argument,
5671 use frame architecture instead.
5672 (vector_info, float_info): Update calls.
5674 * objc-lang.c (objc_skip_trampoline): Use frame architecture
5675 instead of current_gdbarch.
5677 * parse.c (write_dollar_variable): Use parse architecture instead
5680 * source.c (line_info): Use objfile architecture instead of
5683 * symtab.c (find_function_start_sal): Use gdbarch instead of
5685 (print_msymbol_info): Use objfile architecture instead of
5688 * valops.c (value_assign): Use frame architecture instead of
5691 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5693 * buildsym.c (record_line): Remove call to gdbarch_addr_bits_remove.
5695 * coffread.c (coff_symtab_read): Call gdbarch_addr_bits_remove before
5696 calling record_line.
5697 (enter_linenos): Likewise.
5698 * dbxread.c (process_one_symbol): Likewise.
5699 * dwarf2read.c (dwarf_decode_lines): Likewise.
5700 * mdebugread.c (psymtab_to_symtab_1): Likewise.
5701 * xcoffread.c (enter_line_range): Likewise.
5703 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5705 * ax-gdb.c (gen_bitfield_ref): Add EXP argument, use expression
5706 architecture instead of current_gdbarch.
5707 (gen_struct_ref): Add EXP argument, pass to get_bitfield_ref.
5708 (gen_expr): Pass expression to get_struct_ref.
5710 * symtab.h (struct symbol_ops): Add GDBARCH parameter to
5711 tracepoint_var_ref callback.
5712 * ax-gdb.c (gen_var_ref): Pass architecture to tracepoint_var_ref
5713 symbol operation callback.
5714 * dwarf2loc.c (dwarf2_tracepoint_var_ref): Add GDBARCH parameter.
5715 Use it instead of current_gdbarch.
5716 (locexpr_tracepoint_var_ref): Add GDBARCH parameter. Pass it to
5717 dwarf2_tracepoint_var_ref.
5718 (loclist_tracepoint_var_ref): Likewise.
5720 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5722 * prologue-value.c (make_pv_area): Add ADDR_BIT argument.
5723 Use it instead of address bits of current_gdbarch.
5724 * prologue-value.c (make_pv_area): Add ADDR_BIT argument.
5725 * arm-tdep.c (thumb_analyze_prologue): Pass address bits to
5727 (arm_scan_prologue): Likewise.
5728 * m32c-tdep.c (m32c_analyze_prologue): Likewise.
5729 * mep-tdep.c (mep_analyze_prologue): Likewise.
5730 * mn10300-tdep.c (mn10300_analyze_prologue): Likewise.
5731 * s390-tdep.c (s390_analyze_prologue): Likewise.
5733 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5735 * mi/mi-main.c (mi_cmd_data_list_register_names): Use selected
5736 frame architecture instead of current_gdbarch.
5737 (mi_cmd_data_list_changed_registers): Likewise.
5738 (mi_cmd_data_list_register_values): Likewise. Pass selected
5739 frame to get_register.
5740 (get_register): Add FRAME argument, use it as frame to retrieve
5741 registers from (instead of selected frame). Use frame architecture
5742 instead of current_gdbarch.
5743 (mi_cmd_data_write_register_values): Use current regcache
5744 architecture instead of current_gdbarch.
5746 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5748 * tui/tui-regs.c (tui_show_register_group): Remove GDBARCH parameter;
5749 use frame architecture instead. Replace current_gdbarch uses.
5750 (tui_show_registers): Update call.
5751 (tui_get_register): Remove GDBARCH parameter; use frame architecture
5753 (tui_show_register_group): Update call.
5754 (tui_check_register_values): Likewise.
5755 (tui_register_format): Remove GDBARCH parameter; use frame
5756 architecture instead. Replace current_gdbarch uses.
5757 (tui_get_register): Update call.
5759 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5761 * gdbarch.sh (construct_inferior_arguments): Remove.
5762 * gdbarch.c, gdbarch.h: Regenerate.
5763 * infcmd.c (get_inferior_args): Call construct_inferior_arguments
5764 directly instead of gdbarch_construct_inferior_arguments.
5765 (construct_inferior_arguments): Remove GDBARCH argument.
5766 * inferior.h (construct_inferior_arguments): Likewise.
5768 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5770 * symfile.c (section_is_mapped): Use objfile architecture instead
5772 (TARGET_LONG_BYTES): Remove.
5773 (read_target_long_array): Add SIZE argument. Use it instead of
5775 (simple_read_overlay_table): Retrieve long size from objfile
5776 architecture; pass it to read_target_long_array.
5777 (simple_read_overlay_region_table): Likewise.
5778 (simple_overlay_update_1): Likewise.
5780 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5782 * infrun.c (cleanup_displaced_step_closure): Remove.
5783 (displaced_step_clear_cleanup): Move to before displaced_step_prepare.
5784 (displaced_step_prepare): Use displaced_step_clear_cleanup instead
5785 of cleanup_displaced_step_closure.
5786 (handle_inferior_event, keep_going): Use thread architecture instead
5789 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
5791 * infrun.c (handle_inferior_event): Use current frame architecture
5792 or thread architecture instead of current_gdbarch. Pass to
5793 handle_step_into_function and handle_step_into_function_backward.
5794 (handle_step_into_function): Add GDBARCH parameter. Use it instead
5796 (handle_step_into_function_backward): Likewise.
5797 (insert_step_resume_breakpoint_at_frame): Use frame architecture
5798 instead of current_gdbarch.
5799 (insert_step_resume_breakpoint_at_caller): Likewise.
5801 2009-06-17 Pierre Muller <muller@ics.u-strasbg.fr>
5802 Pedro Alves <pedro@codesourcery.com>
5804 * infcmd.c (post_create_inferior): Call breakpoint_re_set after target
5805 is pushed for watchpoint promotion to hardware watchpoint.
5807 2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
5809 * dwarf2read.c (dwarf_info_section, dwarf_abbrev_section)
5810 (dwarf_line_section, dwarf_pubnames_section, dwarf_aranges_section)
5811 (dwarf_loc_section, dwarf_macinfo_section, dwarf_str_section)
5812 (dwarf_ranges_section, dwarf_frame_section)
5813 (dwarf_eh_frame_section): Removed.
5814 (dwarf2_resize_section): Likewise.
5815 (dwarf2_read_section): Now static, use bfd_mmap() if possible.
5816 (dwarf2_get_section_info): New function.
5817 (munmap_section_buffer): Likewise.
5818 (dwarf2_per_objfile_cleanup): Likewise.
5819 (section_is_p): Signature change.
5820 * dwarf2-frame.c (dwarf2_build_frame_info): Use
5821 dwarf2_get_section_info instead of dwarf2_read_section.
5823 2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
5825 * solib.c (symbol_add_stub): New FLAGS parameter.
5826 (solib_read_symbols): FROM_TTY -> FLAGS, call symbol_add_stub
5828 (solib_add): Defer breakpoint_re_set until after all solibs.
5829 * bsd-uthread.c (bsd_uthread_solib_loaded): Adjust.
5830 * rs6000-nat.c (objfile_symbol_add): Adjust.
5831 * symfile.c (syms_from_objfile): Merge parameters into ADD_FLAGS.
5832 (new_symfile_objfile): Likewise.
5833 (symbol_file_add_with_addrs_or_offsets): Likewise.
5834 (symbol_file_add_from_bfd): Likewise.
5835 (symbol_file_add): Likewise.
5836 * symfile.h (enum symfile_add_flags): New. Adjust prototypes.
5837 * symfile-mem.c (symbol_file_add_from_memory): Adjust.
5838 * windows-nat.c (safe_symbol_file_add_stub): Adjust.
5839 * machoread.c (macho_oso_symfile, macho_symfile_read): Adjust.
5841 2009-06-16 Keith Seitz <keiths@redhat.com>
5843 * linespec.c (collect_methods): Delete.
5844 (add_matching_methods): Reove destructor special case.
5845 (find_method): Call find_methods directly instead of
5847 * valops.c (value_struct_elt): Remove destructor
5849 (check_field): Likewise.
5850 (value_struct_elt_for_reference): Likewise.
5851 (destructor_name_p): Remove misleading comment about dtors
5852 being "special cases".
5853 * gdbtypes.h (get_destructor_fn_field): Remove. No longer needed.
5854 * gdbtypes.c (get_destructor_fn_field): Likewise.
5856 2009-06-16 Pedro Alves <pedro@codesourcery.com>
5858 * mi/mi-main.c (mi_cmd_data_read_memory): Dispatch
5859 TARGET_OJECT_MEMORY reads to the topmost target, not to the
5860 flattened current_target.
5862 2009-06-16 Tristan Gingold <gingold@adacore.com>
5864 * avr-tdep.c (struct gdbarch_tdep): Replace the unused field with
5866 (avr_register_name): Add const to register_names.
5867 (avr_scan_arg_moves): Move inside avr_scan_prologue.
5868 (avr_scan_prologue): Add pc_end argument.
5869 Only read prologue bytes that can be read.
5870 Limit the scan to the known prologue length.
5871 Makes pattern variables static and const.
5873 (avr_skip_prologue): Pass func_end argument to avr_scan_prologue.
5875 (avr_breakpoint_from_pc): Constify avr_break_insn.
5876 (avr_extract_return_value): Fix function comment.
5877 (avr_frame_unwind_cache): Fix GNU style violations.
5878 Pass current_pc argument to avr_scan_prologue to stop prologue
5879 analysis to the current pc. This fixes the bug with the 'next'
5881 Correctly set the SP register of the previous frame (use call_length).
5882 (avr_frame_prev_register): Fix indentation.
5883 Correctly read PC from the stack on avr6 architectures.
5884 (avr_push_dummy_call): Fix indentation.
5885 (avr_gdbarch_init): Set call_length according to the architecture.
5887 2009-06-15 Phil Muldoon <pmuldoon@redhat.com>
5889 * infcall.c (show_unwind_on_terminating_exception_p): New
5891 (call_function_by_hand): Create breakpoint and clean-up call for
5892 std::terminate.breakpoint. Add unwind_on_terminating_exception_p
5893 gate. Pop frame on breakpoint hit.
5894 (_initialize_infcall): Add add_setshow_boolean_cmd for
5895 unwind-on-terminating-exception.
5897 2009-06-12 Kevin Buettner <kevinb@redhat.com>
5899 * dwarf2read.c (dwarf2_psymtab_to_symtab): Propagate
5900 `has_section_at_zero' flag from stripped objfile to separate,
5901 debug info only, objfile.
5903 2009-06-12 Pedro Alves <pedro@codesourcery.com>
5905 * exec.h (section_table_xfer_memory_partial): Improve description,
5906 mention SECTION_NAME.
5907 * exec.c (section_table_xfer_memory_partial): Remove stale
5910 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
5912 * nto-tdep.h (nto_generic_supply_gpregset)
5913 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
5914 * nto-tdep.c (nto_generic_supply_gpregset)
5915 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
5917 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
5919 * i386-nto-tdep.c (I386_NTO_SIGCONTEXT_OFFSET): Remove define.
5920 (i386nto_sigcontext_addr): Change the way context address is calculated.
5921 (i386nto_init_abi): Remove usage of deprecated sc_reg_offset and
5922 sc_sp_offset and set sc_reg_offset and sc_num_regs.
5924 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
5926 * i386-nto-tdep.c (i386_nto_target): Remove definition.
5927 (init_i386nto_ops): Use macros to set fields to global
5928 current_nto_target directly.
5929 (i386nto_init_abi): Remove unused nto_set_target call.
5930 * nto-tdep.h (nto_set_target): Remove unused declaration.
5931 * nto-tdep.c (nto_set_target): Remove unused function.
5933 2009-06-11 Pedro Alves <pedro@codesourcery.com>
5935 * breakpoint.c (break_command_really): Rename local variable
5936 breakpoint_chain to bkpt_chain.
5938 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
5940 Add support for XMM registers.
5941 * i386-nto-tdep.c (i386nto_regset_id): Add case for SSE register set.
5942 (i386nto_register_area): Correctly calculate offsets and sizes for
5943 all supported registers.
5945 2009-06-11 Tom Tromey <tromey@redhat.com>
5947 * eval.c (evaluate_subexp_standard) <OP_OBJC_MSGCALL>: Remove
5948 'static' from local variable definitions.
5950 2009-06-11 Pedro Alves <pedro@codesourcery.com>
5952 * symtab.c (append_expanded_sal): Remove unused local variables.
5954 2009-06-11 Pedro Alves <pedro@codesourcery.com>
5956 * infrun.c (sched_multi): New global.
5957 (resume): If sched_multi is set, resume only threads of the
5959 (prepare_to_proceed): Don't switch over to wait_ptid if we're
5960 resuming a different inferior, and sched_multi is off.
5961 (show_schedule_multiple): New.
5962 (_initialize_infrun): Register new "set schedule-multiple" command.
5963 * inferior.h (sched_multi): Declare.
5964 * NEWS: Mention new "schedule-multiple" setting.
5966 2009-06-11 Pedro Alves <pedro@codesourcery.com>
5968 * varobj.c (varobj_create): Properly restore the selected frame.
5970 2009-06-05 Tom Tromey <tromey@redhat.com>
5972 * inferior.c (print_inferior): Make a table, not a list. Emit
5975 2009-06-10 Jonas Maebe <jonas.maebe@elis.ugent.be>
5977 * darwin-nat.c (darwin_stop_inferior): Pass 0 as options to
5978 darwin_wait (blocking wait).
5979 (darwin_kill_inferior): Likewise.
5981 2009-06-10 Pedro Alves <pedro@codesourcery.com>
5983 * infrun.c (handle_inferior_event): Update comment around trying
5984 to revert back to a stepping thread that has exited.
5986 2009-06-10 Cary Coutant <ccoutant@google.com>
5988 * dwarf2read.c (dwarf_decode_lines): Recognize and ignore
5989 DW_LNE_set_discriminator.
5991 2009-06-10 Pierre Muller <muller@ics.u-strasbg.fr>
5993 * breakpoint.c: ARI fixes.
5994 (create_overlay_event_breakpoint): Avoid assignment inside if statement.
5995 (print_one_breakpoint_location): Likewise.
5996 (create_longjmp_breakpoint): Likewise.
5997 (tracepoint_save_command): Likewise
5998 (bpstat_find_step_resume_breakpoint): No operator at end of line.
5999 (bpstat_stop_status): Likewise.
6000 (describe_other_breakpoints): Likewise.
6001 (hw_watchpoint_used_count): Likewise.
6002 (expand_line_sal_maybe): Likewise.
6003 (break_command_really): Likewise.
6004 (delete_command): Likewise.
6005 (do_enable_breakpoint): Likewise.
6006 (delete_trace_command): Likewise.
6007 (catch_exception_command_1): Likewise and remove extra parentheses.
6009 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
6011 * breakpoint.c (_initialize_breakpoint): Remove "bu" command alias of
6012 "ubreak" command that does not exist.
6014 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
6016 * cli/cli-decode.c (add_alias_cmd): Correct assertion.
6018 2009-06-07 Pedro Alves <pedro@codesourcery.com>
6020 * hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
6022 2009-06-07 Pedro Alves <pedro@codesourcery.com>
6025 * proc-utils.h (procfs_first_available): Don't declare here.
6026 * sol-thread.c: Include procfs.h instead of sys/procfs.h and
6028 * procfs.c: Include procfs.h.
6029 (procfs_target): Make it public. Don't register
6030 procfs_can_use_hw_breakpoint here.
6031 (proc_set_watchpoint): Check for PCWATCH or PIOCSWATCH being
6032 defined instead of TARGET_HAS_HARDWARE_WATCHPOINTS.
6033 (procfs_can_use_hw_breakpoint): Remove check of
6034 TARGET_HAS_HARDWARE_WATCHPOINTS.
6035 (procfs_use_watchpoints): Register procfs_can_use_hw_breakpoint
6037 (_initialize_procfs): Don't add the procfs target here.
6039 * i386-sol2-nat.c: Include target.h and procfs.h.
6040 (_initialize_amd64_sol2_nat): Install the procfs target here,
6041 customized with watchpoints support.
6042 * irix5-nat.c: Include target.h.
6043 (_initialize_core_irix5): Rename to ...
6044 (_initialize_irix5_nat): ... this. Install the procfs target
6045 here, customized with watchpoints support.
6046 * alpha-nat.c: Include procfs.h.
6047 (_initialize_core_alpha): Rename to...
6048 (_initialize_alpha_nat): ... this. Install the procfs target
6049 here, customized with watchpoints support.
6050 * sparc-sol2-nat.c: Include target.h and procfs.h.
6051 (_initialize_sparc_sol2_nat): New.
6053 * config/i386/nm-i386sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
6054 * config/sparc/nm-sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
6055 * config/mips/irix5.mh (NAT_FILE): Delete.
6056 * config/mips/irix6.mh (NAT_FILE): Delete.
6057 * config/mips/nm-irix5.h: Delete.
6059 20009-06-07 Pedro Alves <pedro@codesourcery.com>
6061 * auxv.c (procfs_xfer_auxv): Change type of the `object' argument
6062 to enum target_object. Cleanup comments.
6063 * auxv.h: Include "target.h". Cleanup comments to not mention
6064 NATIVE_XFER_AUXV anymore.
6066 2009-06-07 Pedro Alves <pedro@codesourcery.com>
6068 * inferior.h (procfs_first_available): Move declaration to...
6069 * proc-utils.h: ... here.
6070 * sol-thread.c: Include procfs.h and proc-utils.h.
6072 2009-06-07 Pedro Alves <pedro@codesourcery.com>
6074 * inferior.h (proc_iterate_over_mappings): Delete declaration.
6075 * nto-tdep.h (proc_iterate_over_mappings): Delete declaration.
6076 * procfs.c (proc_iterate_over_mappings): Delete.
6078 2009-06-07 Pedro Alves <pedro@codesourcery.com>
6080 * target.h (struct target_ops): Make to_has_all_memory,
6081 to_has_memory, to_has_stack, to_has_registers and to_has_execution
6082 methods instead of variables.
6083 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1)
6084 (target_has_registers_1, target_has_execution_1): Declare
6086 (target_has_all_memory): Rewrite to call target_has_all_memory_1.
6087 (target_has_memory): Rewrite to call target_has_memory_1.
6088 (target_has_stack): Rewrite to call target_has_all_stack_1.
6089 (target_has_registers): Rewrite to call target_has_registers_1.
6090 (target_has_execution): Rewrite to call target_has_execution_1.
6091 (default_child_has_all_memory, default_child_has_memory)
6092 (default_child_has_stack, default_child_has_registers)
6093 (default_child_has_execution): Declare.
6094 (target_mark_running, target_mark_exited): Delete declarations.
6095 * target.c (default_child_has_all_memory,
6096 default_child_has_memory, default_child_has_stack,
6097 default_child_has_registers, default_child_has_execution): New.
6098 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1,
6099 target_has_registers_1, target_has_execution_1): New.
6100 (add_target): Default the to_has_all_memory, to_has_all_memory,
6101 to_has_memory, to_has_stack, to_has_registers and to_has_execution
6102 callbacks to return 0.
6103 (update_current_target): Do not inherit to_has_all_memory,
6104 to_has_memory, to_has_stack, to_has_registers or to_has_execution.
6105 (target_mark_running, target_mark_exited): Delete.
6106 (memory_xfer_partial): Adjust.
6107 (target_read_memory, target_write_memory, target_search_memory):
6108 Dispatch to the the top-most target, not the flattened
6110 (target_info): Adjust.
6111 (init_dummy_target): Install return_zero as callback for
6112 to_has_all_memory, to_has_memory, to_has_stack, to_has_registers,
6114 (set_maintenance_target_async_permitted): Use have_live_inferiors
6115 instead of target_has_execution.
6116 * target-memory.c (target_write_memory_blocks): Dispatch memory
6117 writes to the the top-most target, not the flattened
6120 * breakpoint.c (insert_breakpoints): Don't check for
6121 target_has_execution here.
6122 (update_global_location_list): Check if there are live inferiors
6123 to debug instead of target_has_execution.
6124 * infcmd.c (kill_command, detach_command): Check if there are
6125 inferiors instead of target_has_execution.
6126 * inferior.h (have_live_inferiors): Declare.
6127 * inferior.c (have_live_inferiors): New.
6128 * infrun.c (normal_stop): Don't check for target_has_execution to
6129 finish the thread states.
6130 * thread.c (is_thread_state, is_stopped, is_exited, is_running)
6131 (any_running, is_executing): Remove checks for
6132 target_has_execution.
6133 * top.c (kill_or_detach): Don't try to kill core inferiors.
6134 (quit_target): Don't check for target_has_execution.
6136 * corelow.c (core_has_memory, core_has_stack, core_has_registers):
6138 (init_core_ops): Install core_has_memory, core_has_stack and
6140 * exec.c (exec_has_memory): New.
6141 (init_exec_ops): Install exec_has_memory.
6142 * remote.c (remote_add_inferior): Don't call target_mark_running.
6143 (remote_start_remote): Don't call target_mark_exited or call
6144 target_mark_running.
6145 (remote_open_1): Use have_inferiors instead of
6146 target_has_execution. Don't use target_mark_exited.
6147 (init_remote_ops): Install deafult_child_has_all_memory,
6148 default_child_has_memory, default_child_has_stack,
6149 default_child_has_registers, default_child_has_execution.
6150 * bsd-kvm.c (bsd_kvm_return_one): New.
6151 (bsd_kvm_add_target): Register bsd_kvm_return_one as
6152 to_has_memory, to_has_stack and to_has_registers callbacks.
6153 * remote-m32r-sdi.c (m32r_return_one): New.
6154 (init_m32r_ops): Register it.
6155 * inf-child.c (inf_child_target): Adjust to register
6156 default_child_has_all_memory, default_child_has_memory,
6157 default_child_has_stack, default_child_has_registers,
6158 default_child_has_execution callbacks.
6159 * gnu-nat.c (init_gnu_ops): Likewise.
6160 * go32-nat.c (init_go32_ops): Likewise.
6161 * hpux-thread.c (init_hpux_thread_ops): Likewise.
6162 * monitor.c (init_base_monitor_ops): Likewise.
6163 * nto-procfs.c (init_procfs_ops): Likewise.
6164 * remote-mips.c (_initialize_remote_mips): Likewise.
6165 * windows-nat.c (init_windows_ops): Likewise.
6166 * remote-sim.c (gdbsim_create_inferior): Don't use
6167 target_mark_running or target_mark_exited.
6168 (gdbsim_mourn_inferior): Don't call target_mark_exited.
6169 (init_gdbsim_ops): Adjust to register
6170 default_child_has_all_memory, default_child_has_memory,
6171 default_child_has_stack, default_child_has_registers,
6172 default_child_has_execution callbacks.
6174 * linux-nat.c (linux_nat_xfer_partial): If reading memory, and
6175 there's no inferior selected, defer to a lower stratum.
6177 2009-06-05 Tom Tromey <tromey@redhat.com>
6179 * varobj.c (update_dynamic_varobj_children): Wrap error text in
6181 (install_visualizer): Likewise.
6182 (varobj_set_visualizer): Likewise.
6184 2009-06-05 Marc Khouzam <marc.khouzam@ericsson.com>
6186 * mi/mi-main.c (mi_cmd_exec_continue)
6187 (mi_cmd_exec_interrupt): Adjust parsing of thread group
6188 ids to current reality, where they don't have any 'p' prefix.
6190 2009-06-05 Aleksandar Ristovski <aristovski@qnx.com>
6192 * corelow.c (core_open): Check for core_gdbarch before calling
6193 gdbarch_target_signal_from_host.
6195 2009-06-05 Tom Tromey <tromey@redhat.com>
6197 * c-exp.y (parse_number): Don't use K&R definition.
6199 (yyerror): Likewise.
6201 2009-06-04 Jan Kratochvil <jan.kratochvil@redhat.com>
6203 * varobj.c (varobj_update): Fix out of scope varobjs to not to change.
6205 2009-06-04 Ulrich Weigand <uweigand@de.ibm.com>
6207 * symtab.h: Rename SYMBOL_OPS to SYMBOL_COMPUTED_OPS.
6208 * ax-gdb.c (gen_var_ref): Likewise.
6209 * findvar.c (read_var_value, symbol_read_needs_frame): Likewise.
6210 * printcmd.c (address_info): Likewise.
6211 * dwarf2loc.c (dwarf_expr_frame_base): Likewise.
6212 * dwarf2read.c (dwarf2_symbol_mark_computed): Likewise.
6213 * symtab.h: Rename struct symbol_ops to struct symbol_computed_ops.
6214 * dwarf2loc.h: Likewise.
6215 * dwarf2loc.c (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Likewise.
6217 * symtab.h: (struct symbol_register_ops): New struct definition.
6218 (struct symbol): Make "ops" member a union of symbol_computed_ops and
6219 symbol_register_ops callback pointers.
6220 (SYMBOL_REGISTER_OPS): New macro.
6221 * tracepoint.c: Include "objfiles.h".
6222 (scope_info, collect_symbol): Use SYMBOL_REGISTER_OPS register_number
6223 callback to retrieve register numbers.
6224 * ax-gdb.c (gen_var_ref): Likewise.
6225 * findvar.c (read_var_value): Likewise.
6226 * printcmd.c (address_info): Likewise.
6228 * coffread.c (coff_reg_to_regnum): New function.
6229 (coff_register_funcs): New static variable.
6230 (process_coff_symbol): Do not call gdbarch_sdb_reg_to_regnum.
6231 Install SYMBOL_REGISTER_OPS callbacks.
6232 * mdebugread.c (mdebug_reg_to_regnum): New function.
6233 (mdebug_register_funcs): New static variable.
6234 (parse_symbol): Do not call gdbarch_ecoff_reg_to_regnum.
6235 Install SYMBOL_REGISTER_OPS callbacks.
6236 * stabsread.c (stab_reg_to_regnum): New function.
6237 (stab_register_funcs): New static variable.
6238 (define_symbol): Do not call gdbarch_stab_reg_to_regnum.
6239 Install SYMBOL_REGISTER_OPS callbacks.
6241 2009-06-03 Doug Evans <dje@google.com>
6243 * symfile.c (reread_symbols): Reset psymtabs_addrmap to NULL
6244 after discarding its contents.
6246 2009-06-03 Pedro Alves <pedro@codesourcery.com>
6248 * target.c: Include "exec.h".
6249 (update_current_target): Don't inherit to_sections or
6251 (target_get_section_table): New.
6252 (target_section_by_addr): Fetch the section table from the passed
6254 (memory_xfer_partial): Handle unmapped overlay sections before
6255 anything else. Get the overlay mapped address here. Adjust to
6256 use section_table_xfer_memory_partial.
6257 (get_target_memory): Request a TARGET_OBJECT_RAW_MEMORY object
6258 instead of TARGET_OBJECT_MEMORY.
6259 (target_resize_to_sections): Delete.
6260 (remove_target_sections): Adjust to remove target sections from
6261 `current_target_sections', and use resize_section_table.
6262 * target.h (struct target_ops) <to_sections, to_sections_end>:
6264 <to_get_section_table>: New method.
6265 (xfer_memory, print_section_info): Delete declarations.
6266 (struct target_section_table): New type.
6267 (target_get_section_table): Declare.
6268 (target_resize_to_sections): Delete declaration.
6269 (remove_target_sections): Delete declaration.
6270 * bfd-target.c (target_bfd_xfer_partial): Get the section table
6272 (target_bfd_get_section_table): New.
6273 (target_bfd_xclose): Adjust.
6274 (target_bfd_reopen): Store the section table in the to_data field.
6275 * corelow.c (core_data): New.
6276 (core_close): Adjust to release core_data and its sections.
6277 (core_open): Allocate core_data, and build its target sections
6279 (deprecated_core_resize_section_table): New.
6280 (core_files_info): Pass core_data to print_section_info.
6281 (core_xfer_partial): Adjust to use
6282 section_table_xfer_memory_partial for TARGET_OBJECT_MEMORY xfers.
6283 (init_core_ops): Do not install a deprecated_xfer_memory callback
6285 * solib.c (update_solib_list): Add the shared library sections
6286 to the current target sections table.
6287 * exec.c (current_target_sections_1): New global.
6288 (current_target_sections): New global.
6289 (exec_close_1): New function, refactored from exec_close. Remove
6290 the exec_bfd's sections from the current target sections table.
6291 Adjust to not use to_sections.
6292 (exec_close): Remove all target sections. Call exec_close_1.
6293 (exec_file_clear): Use exec_close_1 instead of unpushing the
6295 (exec_file_attach): Likewise. Adjust to not use to_sections. Add
6296 exec_bfd's sections to the current target sections table. Don't
6297 push the exec_ops target here.
6298 (resize_section_table): New.
6299 (add_target_sections): New.
6300 (remove_target_sections): Moved here.
6301 (section_table_xfer_memory): Adjust to implement the xfer_partial
6302 interface, and rename to...
6303 (section_table_xfer_memory_partial): ... this, replacing the
6304 current function of that same name.
6305 (exec_get_section_table): New.
6306 (exec_xfer_partial): New.
6307 (xfer_memory): Delete.
6308 (print_section_info): Replace the target_ops parameter by a
6309 target_section_table parameter.
6310 (exec_files_info, set_section_command, exec_set_section_address):
6311 Adjust to use the current sections table.
6312 (init_exec_ops): Do not register a deprecated_xfer_memory
6313 callback. Register to_xfer_partial and to_get_section_table
6315 * infrun.c (handle_inferior_event): Update comments around
6317 * rs6000-nat.c (xcoff_relocate_core): Adjust to use
6318 deprecated_core_resize_section_table.
6319 * exec.h (resize_section_table): Declare.
6320 (section_table_xfer_memory_partial): Add const char * argument.
6321 (remove_target_sections): Declare here.
6322 (add_target_sections): Declare.
6323 (print_section_info): Declare here.
6324 * gdbcore.h (deprecated_core_resize_section_table): Declare.
6326 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
6328 * value.h (struct internalvar): Remove.
6329 (get_internalvar_integer): Add prototype.
6330 (set_internalvar_integer): Add prototype.
6331 (clear_internalvar): Add prototype.
6333 * value.c (struct internalvar): Move here. Add type member. Remove
6334 endian member. Add union_internalvar member instead of value member.
6335 (init_if_undefined_command): Use intvar->type.
6336 (create_internalvar): Do not initialize value/endian, but type.
6337 (create_internalvar_type_lazy): Call create_internalvar.
6338 (value_of_internalvar): Handle host-side internalvar contents.
6339 (set_internalvar_component): Likewise.
6340 (set_internalvar): Likewise.
6341 (get_internalvar_integer): New function.
6342 (clear_internalvar): Likewise.
6343 (set_internalvar_integer): Likewise.
6344 (preserve_values): Handle host-side internalvar contents.
6346 * breakpoint.c (set_breakpoint_count, set_tracepoint_count): Call
6347 set_internalvar_integer instead of set_internalvar.
6348 * findcmd.c (find_command): Likewise.
6349 * infrun.c (handle_inferior_event): Likewise.
6350 * source.c (forward_search_command, reverse_search_command): Likewise.
6351 * tracepoint.c (set_traceframe_num, set_tracepoint_num,
6352 set_traceframe_context): Likewise.
6354 * printcmd.c (x_command): Call clear_internalvar instead of
6356 * tracepoint.c (set_traceframe_context): Likewise.
6358 * breakpoint.c (get_number_trailer): Call get_internalvar_integer
6359 instead of value_of_internalvar.
6360 * linespec.c (decode_dollar): Likewise.
6362 * expprint.c (dump_subexp_body_standard): Use internalvar_name
6363 instead of accessing internalvar private elements.
6364 * valops.c (value_assign): Copy from original source instead of
6365 accessing internalvar private elements.
6367 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
6369 * scm-lang.c (builtin_type_scm): Remove.
6370 (scm_lookup_name): Add GDBARCH parameter. Use it instead of
6371 objfile architecture. Use per-architecture builtin_scm_type instead
6372 of builtin_type_scm.
6373 (evaluate_exp): Pass expression architecture to scm_lookup_name.
6375 (scm_get_field): Add SIZE parameter. Use it instead of
6376 TYPE_LENGTH (builtin_type_scm).
6378 (build_scm_types): New function.
6379 (scm_type_data): New variable.
6380 (builtin_scm_type): New function.
6381 (_initialize_scheme_language): Do not initialize builtin_type_scm.
6382 Register build_scm_types as post-init function for scm_type_data.
6384 * scm-exp.c (scm_lreadr): Use per-architecture builtin_scm_type
6385 instead of builtin_type_scm.
6387 * scm-lang.h (SCM_CAR, SCM_CDR): Pass SCM_SIZE to scm_get_field.
6388 (scm_get_field): Add SIZE paramter.
6389 (scm_scmval_print): Remove prototype.
6390 (builtin_type_scm): Remove.
6391 (struct builtin_scm_type): Add structure definition.
6392 (builtin_scm_type): Add prototype.
6394 * scm-valprint.c (scm_inferior_print): Add TYPE parameter. Use it
6395 instead of builtin_core_addr type; do not use objfile architecture.
6396 (scm_scmlist_print): Add TYPE parameter. Use it to define SCM_SIZE.
6397 Pass type to scm_scmval_print.
6398 (scm_ipruk): Add TYPE parameter. Use it to define SCM_SIZE.
6399 (scm_scmval_print): Make static. Add TYPE parameter. Use it to
6400 define SCM_SIZE. Pass type to scm_ipruk and scm_scmlist_print.
6401 (scm_val_print): Pass type to scm_inferior_print and scm_scmval_print.
6403 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
6405 * mdebugread.c (mdebug_type_void, mdebug_type_char, mdebug_type_short,
6406 mdebug_type_int, mdebug_type_int_32, mdebug_type_int_64,
6407 mdebug_type_long_32, mdebug_type_long_64, mdebug_type_long_long_64,
6408 mdebug_type_unsigned_char, mdebug_type_unsigned_short,
6409 mdebug_type_unsigned_int_32, mdebug_type_unsigned_int_64,
6410 mdebug_type_unsigned_long_32, mdebug_type_unsigned_long_64,
6411 mdebug_type_unsigned_long_long_64, mdebug_type_adr_32,
6412 mdebug_type_adr_64, mdebug_type_float, mdebug_type_double,
6413 mdebug_type_complex, mdebug_type_double_complex,
6414 mdebug_type_fixed_dec, mdebug_type_float_dec, mdebug_type_string):
6417 (basic_type_data): New global variable.
6418 (basic_type): New function.
6419 (parse_type): Remove static basic type map map_bt. Call basic_type
6420 to get basic types instead of using mdebug_type_ variables.
6422 (parse_symbol): Use builtin types instead of mdebug_type_ variables.
6423 (upgrade_type): Likewise.
6424 (parse_procedure): Likewise.
6425 (psymtab_to_symtab_1): Likewise.
6427 (_initialize_mdebugread): Do not initialize mdebug_type_ variables.
6428 Initialize basic_type_data.
6430 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
6432 * dfp.h (decimal_binop): Convert LEN_RESULT to input parameter.
6433 * dfp.c (promote_decimal): Remove.
6434 (decimal_binop): Convert LEN_RESULT to input parameter.
6435 Remove call to decimal_binop.
6436 (decimal_compare): Remove call to decimal_binop.
6438 * valarith.c (value_binop): Pass desired result type length
6441 2009-06-01 Tristan Gingold <gingold@adacore.com>
6443 * configure.tgt (avr): Set gdb_sim to use the simulator.
6445 2009-05-29 Doug Evans <dje@google.com>
6447 * infrun.c (prepare_to_proceed): Document. Assert !non_stop.
6448 If scheduler-locking is enabled, we're not going to be singlestepping
6449 any other previously stopped thread.
6451 2009-05-29 Pedro Alves <pedro@codesourcery.com>
6453 * mi/mi-interp.c (mi_on_resume): Initialize `count' to 0.
6455 2009-05-29 Eli Zaretskii <eliz@gnu.org>
6457 * i386-tdep.c (i386_go32_init_abi): Use SVR4 register numbering
6458 for stabs and COFF debug info.
6460 2009-05-28 Pedro Alves <pedro@codesourcery.com>
6462 * infrun.c (handle_inferior_event): When thread hoping, switch
6463 inferior_ptid to the event thread before removing breakpoints from
6464 the target. If not stopping, also try to revert back to a thread
6465 that was doing a "next". Check if that thread still exists before
6467 (currently_stepping_thread): Delete and merge with ...
6468 (currently_stepping): ... this.
6469 (currently_stepping_callback): Rename to ...
6470 (currently_stepping_or_nexting_callback): ... this, and also
6471 return true if the thread was stepping over a call (has a
6472 step-resume breakpoint).
6474 2009-05-28 Tom Tromey <tromey@redhat.com>
6476 * python/python.c (gdbpy_parameter): Rename. Fix error message.
6477 (GdbMethods): Change "get_parameter" to "parameter".
6479 2009-05-28 Pierre Muller <muller@ics.u-strasbg.fr>
6480 Paul Pluzhnikov <ppluzhnikov@google.com>
6482 * configure.ac (!have_libpython): Add python-prettyprint source
6484 * configure: Regenerate.
6485 * python/python-prettyprint.c: Move "#ifdef HAVE_PYTHON" before
6488 2009-05-27 Vladimir Prus <vladimir@codesourcery.com>
6489 Tom Tromey <tromey@redhat.com>
6490 Thiago Jung Bauermann <bauerman@br.ibm.com>
6492 * mi/mi-main.c (mi_cmd_list_features): List "python" feature.
6493 * varobj.h (varobj_set_visualizer): Declare.
6494 (varobj_get_display_hint): Likewise.
6495 (varobj_update_result_t) <children_changed, value_installed>: New
6497 * mi/mi-cmds.c (mi_cmds): Add var-set-visualizer.
6498 * mi/mi-cmds.h (mi_cmd_var_set_visualizer,
6499 mi_cmd_var_set_child_range): Declare.
6500 * mi/mi-cmd-var.c (mi_cmd_var_set_visualizer): New function.
6501 (mi_cmd_var_list_children): Emit display hint.
6502 (varobj_update_one): Emit display hint. Handle dynamic children.
6503 * python/python.c (GdbMethods): Add "default_visualizer".
6504 * python/python-internal.h (apply_varobj_pretty_printer,
6505 gdbpy_get_varobj_pretty_printer, gdbpy_get_display_hint):
6507 (gdbpy_default_visualizer): Likewise.
6508 * varobj.c: Include python.h, python-internal.h.
6509 (PyObject): New typedef.
6510 (struct varobj) <children_requested, pretty_printer>: New fields.
6511 (varobj_create): Call install_default_visualizer.
6512 (instantiate_pretty_printer): New function.
6513 (varobj_set_display_format): Update.
6514 (varobj_get_display_hint): New function.
6515 (update_dynamic_varobj_children): New function.
6516 (varobj_get_num_children): Handle dynamic children.
6517 (varobj_list_children): Likewise.
6518 (install_new_value): Likewise.
6519 (varobj_add_child): New function.
6520 (install_visualizer): Likewise.
6521 (install_default_visualizer): Likewise.
6522 (varobj_set_visualizer): Likewise.
6523 (varobj_update): Handle dynamic children.
6524 (create_child): Use create_child_with_value.
6525 (create_child_with_value): New function.
6526 (value_get_print_value): Call pretty printer. Add value_formatter
6528 (c_value_of_variable): Update.
6529 (varobj_invalidate): Always free all_rootvarobj.
6530 * python/python-prettyprint.c (apply_varobj_pretty_printer): New
6532 (gdbpy_get_varobj_pretty_printer): Likewise.
6533 (gdbpy_default_visualizer): Likewise.
6535 2009-05-27 Tom Tromey <tromey@redhat.com>
6536 Thiago Jung Bauermann <bauerman@br.ibm.com>
6537 Phil Muldoon <pmuldoon@redhat.com>
6538 Paul Pluzhnikov <ppluzhnikov@google.com>
6539 Vladimir Prus <vladimir@codesourcery.com>
6541 * python/python-value.c (value_object_to_value): New function.
6542 * python/python-internal.h: Include frameobject.h.
6543 (gdbpy_children_cst, gdbpy_to_string_cst, gdbpy_display_hint_cst):
6545 (value_object_to_value): Declare.
6546 * printcmd.c (struct format_data) <raw>: New field.
6547 (last_format): Default to 0.
6548 (decode_format): Initialize val.raw. Handle /r flag.
6549 (print_command_1): Initialize fmt.raw and opts.raw.
6550 (output_command): Likewise.
6551 (x_command): Fix initialization of fmt.format. Initialize
6553 (display_command): Initialize fmt.raw.
6554 (do_one_display): Set opts.raw.
6555 * python/python.c (gdbpy_to_string_cst, gdbpy_children_cst,
6556 gdbpy_display_hint_cst): New globals.
6557 (_initialize_python): Initialize them. Set gdb.pretty_printers.
6558 * cp-valprint.c: Include python.h.
6559 (cp_print_value): Call apply_val_pretty_printer.
6560 * python/python.h (apply_val_pretty_printer): Declare.
6561 * stack.c (print_this_frame_argument_p): Remove.
6562 (print_frame_args): Compute summary flag. Don't use
6563 print_this_frame_argument_p.
6564 * valprint.c: Include python.h.
6565 (user_print_options): Initialize new fields.
6566 (scalar_type_p): New function.
6567 (val_print): Handle 'raw' and 'summary' modes. Call
6568 apply_val_pretty_printer.
6569 (value_print): Handle 'raw' mode.
6570 * valprint.h (struct value_print_options) <raw, summary>: New
6572 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-prettyprint.o
6573 (SUBDIR_PYTHON_SRCS): Add python-prettyprint.c.
6574 (python-prettyprint.o): New target.
6575 * python/python-prettyprint.c: New file.
6577 2009-05-27 Tom Tromey <tromey@redhat.com>
6578 Paul Pluzhnikov <ppluzhnikov@google.com>
6580 * mi/mi-main.c (mi_cmd_data_evaluate_expression): Use
6582 * cli/cli-dump.c (dump_value_to_file): Use value_address.
6583 * valprint.c (common_val_print): Likewise.
6584 * v850-tdep.c (v850_push_dummy_call): Use value_address.
6585 * tracepoint.c (encode_actions): Use value_address.
6586 * printcmd.c (print_formatted): Use value_address.
6587 (x_command): Likewise.
6588 * p-valprint.c (pascal_object_print_static_field): Use
6590 * mn10300-tdep.c (mn10300_push_dummy_call): Use value_address.
6591 * mips-tdep.c (mips_eabi_push_dummy_call): Use value_address.
6592 * m32r-tdep.c (m32r_push_dummy_call): Use value_address.
6593 * jv-valprint.c (java_value_print): Use value_address.
6594 * infcall.c (find_function_addr): Use value_address.
6595 * gnu-v3-abi.c (gnuv3_rtti_type): Use value_address.
6596 * gnu-v2-abi.c (gnuv2_value_rtti_type): Use value_address.
6597 * frv-tdep.c (frv_push_dummy_call): Use value_address.
6598 * frame.c (frame_register_unwind): Use value_address.
6599 (frame_unwind_register_value): Likewise.
6600 * darwin-nat-info.c (info_mach_region_command): Use
6602 * cp-valprint.c (cp_print_static_field): Use value_address.
6603 * c-valprint.c (c_value_print): Use value_address.
6604 * breakpoint.c (update_watchpoint): Use value_address.
6605 (can_use_hardware_watchpoint): Likewise.
6606 * ada-valprint.c (ada_val_print_1): Use value_address.
6607 (ada_value_print): Likewise.
6608 * ada-tasks.c (read_fat_string_value): Use value_address.
6609 * jv-lang.c (java_link_class_type): Use set_value_address.
6610 (java_link_class_type): Likewise.
6611 (get_java_utf8_name): Use value_address.
6612 (type_from_class): Likewise.
6613 (java_link_class_type): Likewise.
6614 * findvar.c (value_of_register): Use set_value_address.
6615 (read_var_value): Likewise.
6616 (read_var_value): Likewise.
6617 * eval.c (evaluate_subexp_standard): Use set_value_address.
6618 (evaluate_subexp_standard): Use value_address.
6619 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Use set_value_address.
6620 * ada-lang.c (coerce_unspec_val_to_type): Use set_value_address.
6621 (ada_value_primitive_packed_val): Likewise.
6622 (ensure_lval): Likewise.
6623 (thin_data_pntr): Use value_address.
6624 (desc_bounds): Likewise.
6625 (ada_value_primitive_packed_val): Likewise.
6626 (value_assign_to_component): Likewise.
6627 (ensure_lval): Likewise.
6628 (make_array_descriptor): Likewise.
6629 (ada_to_fixed_value): Likewise.
6630 (unwrap_value): Likewise.
6631 * value.c (deprecated_value_address_hack): Remove.
6632 (value_address): New function.
6633 (value_raw_address): Likewise.
6634 (set_value_address): Likewise.
6635 (value_fn_field): Use set_value_address.
6636 (value_from_contents_and_address): Likewise.
6637 (value_fn_field): Likewise.
6638 (allocate_value_lazy): Don't use VALUE_ADDRESS.
6639 (value_as_address): Use value_address.
6640 (value_static_field): Likewise.
6641 * valops.c (search_struct_field): Use set_value_address.
6642 (value_at): Likewise.
6643 (value_at_lazy): Likewise.
6644 (value_repeat): Likewise.
6645 (value_cast_structs): Use value_address.
6646 (value_cast): Likewise.
6647 (value_fetch_lazy): Likewise.
6648 (value_assign): Likewise.
6649 (value_repeat): Likewise.
6650 (address_of_variable): Likewise.
6651 (value_coerce_array): Likewise.
6652 (value_coerce_function): Likewise.
6653 (value_addr): Likewise.
6654 (search_struct_field): Likewise.
6655 (search_struct_method): Likewise.
6656 (find_method_list): Likewise.
6657 (value_struct_elt_for_reference): Likewise.
6658 (value_full_object): Likewise.
6659 * jv-valprint.c (java_value_print): Use set_value_address.
6660 * value.h (deprecated_value_address_hack): Remove.
6661 (VALUE_ADDRESS): Remove.
6662 (value_address): Declare.
6663 (value_raw_address): Declare.
6664 (set_value_address): Declare.
6666 2009-05-27 Tom Tromey <tromey@redhat.com>
6667 Thiago Jung Bauermann <bauerman@br.ibm.com>
6668 Phil Muldoon <pmuldoon@redhat.com>
6669 Paul Pluzhnikov <ppluzhnikov@google.com>
6671 * python/python.c (_initialize_python): Call
6672 gdbpy_initialize_types.
6673 (GdbMethods): Add "lookup_type".
6674 * python/python-value.c (value_object) <type>: New field.
6675 (valpy_dealloc): Decref type.
6676 (valpy_new): Initialize type.
6677 (valpy_get_type): New function.
6678 (value_to_value_object): Initialize type.
6679 (valpy_cast): New function.
6680 (value_object_getset): Add "type".
6681 (value_object_methods): Add "cast".
6682 * python/python-internal.h (type_to_type_object): Declare.
6683 (type_object_to_type): Likewise.
6684 (gdbpy_initialize_types): Likewise.
6685 (gdbpy_lookup_type): Declare.
6686 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-type.o.
6687 (SUBDIR_PYTHON_SRCS): Add python-type.c.
6688 (python-type.o): New target.
6689 * python/python-type.c: New file.
6691 2009-05-27 Tom Tromey <tromey@redhat.com>
6692 Thiago Jung Bauermann <bauerman@br.ibm.com>
6693 Phil Muldoon <pmuldoon@redhat.com>
6695 * python/python.c: Include objfiles.h, observer.h.
6696 (gdbpy_auto_load): New global.
6697 (gdbpy_current_objfile): Likewise.
6698 (GDBPY_AUTO_FILENAME): New define.
6699 (gdbpy_new_objfile): New function.
6700 (gdbpy_get_current_objfile): Likewise.
6701 (gdbpy_objfiles): Likewise.
6702 (_initialize_python): Add "maint set auto-load". Call
6703 gdbpy_initialize_objfile. Attach objfile observer.
6704 (GdbMethods): New methods current_objfile, objfiles.
6705 * python/python-objfile.c: New file.
6706 * python/python-internal.h (objfile_to_objfile_object): Declare.
6707 (objfpy_get_printers): Likewise.
6708 (gdbpy_initialize_objfile): Likewise.
6709 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-objfile.o.
6710 (SUBDIR_PYTHON_SRCS): Add python-objfile.c.
6711 (python-objfile.o): New target.
6713 2009-05-27 Pedro Alves <pedro@codesourcery.com>
6715 * infrun.c (follow_exec): Clear the stop_requested flag.
6716 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
6719 2009-05-27 Aleksandar Ristovski <aristovski@qnx.com>
6721 * nto-procfs.c (get_regset): Pass correct pointer.
6723 2009-05-26 Doug Evans <dje@google.com>
6725 * dwarf2read.c (follow_die_ref): Add comment.
6726 (dwarf2_mark_helper): Tweak comment.
6727 (dwarf2_mark): Move description to its proper place.
6729 2009-05-25 Pierre Muller <muller@ics.u-strasbg.fr>
6731 * procfs.c (procfs_wait): Add options parameter.
6733 2009-05-24 Doug Evans <dje@google.com>
6735 Global renaming of find_thread_pid to find_thread_ptid.
6736 * gdbthread.h (find_thread_ptid): Renamed from find_thread_pid.
6737 * thread.c (find_thread_ptid): Renamed from find_thread_pid.
6738 All callers updated.
6740 * infrun.c (follow_fork): Initialize new step_* locals
6741 to avoid "may be used uninitialized" warnings.
6743 2009-05-24 Pedro Alves <pedro@codesourcery.com>
6745 * inflow.c (copy_terminal_info): Deep copy `run_terminal'.
6747 2009-05-24 Pedro Alves <pedro@codesourcery.com>
6749 * gdbthread.h (struct thread_info): New `pending_follow' field.
6750 * thread.c (new_thread): New function.
6751 (add_thread_silent): Use it.
6752 * breakpoint.c (internal_breakpoint_number): New global, moved
6754 (create_internal_breakpoint): ... this.
6755 (clone_momentary_breakpoint): New.
6756 * breakpoint.h (clone_momentary_breakpoint): Declare.
6757 * infrun.c (nullify_last_target_wait_ptid): Move declaration
6759 (pending_follow): Delete.
6760 (follow_fork): Handle pending follow fork event here. Moved the
6761 preserving of thread stepping state here.
6762 (resume): Don't handle pending follow fork events here. Only
6763 install the inferior's terminal modes if we're about to resume it.
6764 (proceed): Handle possible pending follow fork events here.
6765 (init_wait_for_inferior): No need to clear pending_follow anymore,
6767 (handle_inferior_event): Adjust to per-thread `pending_follow'.
6768 Call `follow_fork' to handle following the fork. If the
6769 follow-fork is cancelled, stop stepping.
6770 * linux-nat.c (linux_child_follow_fork): Adjust to per-thread
6771 `pending_follow' events. Remove code that handled preserving the
6772 thread stepping state.
6773 * inf-ptrace.c (inf_ptrace_follow_fork): Ditto.
6774 * inf-ttrace.c (inf_ttrace_follow_fork): Ditto.
6776 2009-05-24 Pierre Muller <muller@ics.u-strasbg.fr>
6778 * symfile.c (add_shared_symbol_files_command): Remove
6779 prototype and function.
6780 (_initialize _symfile): Move "add-shared-symbol-files"
6781 command and "assf" alias.
6782 * windows-nat.c (_initialize_windows_nat): to here.
6783 Change "add-shared-symbol-files" to alias.
6785 * config/i386/cygwin.mh: Remove NAT_FILE.
6786 * config/i386/mingw.mh: Remove NAT_FILE.
6787 * config/i386/mingw64.mh: Remove NAT_FILE.
6788 * config/i386/nm-cygwin.h: Remove file.
6789 * config/i386/nm-cygwin64.h: Remove file.
6791 2009-05-24 Hui Zhu <teawater@gmail.com>
6793 * i386-linux-tdep.c (I386_LINUX_RECORD_SIZE_*,
6794 I386_LINUX_RECORD_IOCTL_*,
6795 I386_LINUX_RECORD_FCNTL_*) Removed.
6796 (i386_linux_init_abi): Change size of record from macros to
6799 2009-05-24 Hui Zhu <teawater@gmail.com>
6801 * i386-linux-tdep.c (i386_linux_init_abi): Remove size_char.
6802 * linux-record.c (record_linux_system_call): Ditto.
6803 * linux-record.h (linux_record_tdep): Ditto.
6805 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
6807 Replace the savestring calls by xstrdup calls where possible.
6808 * breakpoint.c (condition_command, set_raw_breakpoint)
6809 (create_catchpoint, update_breakpoint_locations): Replace the
6810 savestring calls by xstrdup calls where possible.
6811 * buildsym.c (start_subfile, patch_subfile_names, record_debugformat)
6812 (record_producer): Likewise.
6813 * coffread.c (coff_start_symtab, complete_symtab): Likewise.
6814 * corefile.c (set_gnutarget): Likewise.
6815 * dbxread.c (add_new_header_file): Likewise.
6816 * demangle.c (set_demangling_command, set_demangling_style): Likewise.
6817 * event-top.c (push_prompt, pop_prompt, command_line_handler)
6818 (set_async_prompt): Likewise.
6819 * infcmd.c (set_inferior_io_terminal, attach_command_post_wait):
6821 * language.c (set_language_command, _initialize_language): Likewise.
6822 * linespec.c (decode_line_2): Likewise.
6823 * rs6000-nat.c (add_vmap): Likewise.
6824 * top.c (set_prompt, init_history, init_main): Likewise.
6825 * tracepoint.c (stringify_collection_list): Likewise.
6826 * varobj.c (varobj_create): Remove variable expr_len. Replace the
6827 savestring calls by xstrdup calls where possible.
6828 (value_of_root, c_name_of_variable, c_describe_child): Replace the
6829 savestring calls by xstrdup calls where possible.
6830 * xcoffread.c (complete_symtab): Likewise.
6831 * cli/cli-script.c (build_command_line, define_command): Likewise.
6832 * cli/cli-setshow.c (do_setshow_command): Likewise.
6834 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
6836 Remove already unreachable code.
6837 * varobj.c (varobj_get_handle): Fix comment when error is called.
6838 All callers updated.
6840 2009-05-23 Eli Zaretskii <eliz@gnu.org>
6842 * README (`configure' options): Document GDB-specific options to
6845 * symtab.c (skip_prologue_using_lineinfo): New function.
6846 (find_function_start_sal): Use it to get to the first line of
6847 function's body that has an entry in the lineinfo table.
6849 * symmisc.c (dump_symtab): Switch the current language to
6850 the language of the symtab we are dumping only if the symtab's
6851 language is neither language_auto nor language_unknown.
6853 * coffread.c (coff_symtab_read): Set language_minimal as the
6854 language for the "_globals_" pseudo-file.
6855 (process_coff_symbol): Set the symbol's language to the language
6858 2009-05-22 Pedro Alves <pedro@codesourcery.com>
6860 * target.h (struct section_table): Rename to ...
6861 (struct target_section): ... this.
6862 * exec.c: Adjust all references.
6863 * exec.h: Adjust all references.
6864 * nto-tdep.c: Adjust all references.
6865 * nto-tdep.h: Adjust all references.
6866 * ppc-linux-tdep.c: Adjust all references.
6867 * rs6000-nat.c: Adjust all references.
6868 * s390-tdep.c: Adjust all references.
6869 * solib-darwin.c: Adjust all references.
6870 * solib-frv.c: Adjust all references.
6871 * solib-irix.c: Adjust all references.
6872 * solib-null.c: Adjust all references.
6873 * solib-osf.c: Adjust all references.
6874 * solib-pa64.c: Adjust all references.
6875 * solib-som.c: Adjust all references.
6876 * solib-sunos.c: Adjust all references.
6877 * solib-svr4.c: Adjust all references.
6878 * solib-target.c: Adjust all references.
6879 * solib.c: Adjust all references.
6880 * solist.h: Adjust all references.
6881 * symfile.c: Adjust all references.
6882 * symfile.h: Adjust all references.
6883 * target.c: Adjust all references.
6885 2009-05-22 Hui Zhu <teawater@gmail.com>
6887 Add sys_fcntl argument interfaces to linux_record_tdep.
6889 * linux-record.h (linux_record_tdep): Add fcntl_F_GETLK,
6890 fcntl_F_GETLK64, fcntl_F_SETLK64 and fcntl_F_SETLKW64 to be
6892 * i386-linux-tdep.c (I386_LINUX_RECORD_FCNTL_F_GETLK,
6893 I386_LINUX_RECORD_FCNTL_F_GETLK64,
6894 I386_LINUX_RECORD_FCNTL_F_SETLK64,
6895 I386_LINUX_RECORD_FCNTL_F_SETLKW64): New macros. The values
6896 of I386 Linux sys_fcntl arguments.
6897 (i386_linux_init_abi): Set macros values to linux_record_tdep.
6898 * linux-record.c (record_linux_system_call): Change to use
6899 the interface in linux_record_tdep in sys_fcntl and
6902 * linux-record.c (record_linux_system_call): Fix the process
6903 record build error about type in CYGWIN.
6905 2009-05-22 Pedro Alves <pedro@codesourcery.com>
6907 * inflow.c (kill_command): Delete left over static declaration.
6909 2009-05-22 Pedro Alves <pedro@codesourcery.com>
6911 * bfd-target.c: Don't include gdb_assert.h or gdb_string.h.
6913 (struct section_closure): Delete.
6914 (add_to_section_table): Delete.
6915 (build_target_sections_from_bfd): Delete.
6916 (target_bfd_xfer_partial): Use section_table_xfer_memory_partial.
6917 (target_bfd_reopen): Use build_section_table.
6918 * exec.c (xfer_memory): Move most code except for overlay
6919 debugging support from here...
6920 (section_table_xfer_memory): ... to this new function.
6921 (section_table_xfer_memory_partial): New.
6922 * exec.h (section_table_xfer_memory_partial): Declare.
6923 * bfd-target.h (build_target_sections_from_bfd): Delete
6926 2009-05-22 Pedro Alves <pedro@codesourcery.com>
6928 * remote.c (compare_sections_command): Don't declare exec_bfd.
6929 * tracepoint.c: Include "gdbcore.h".
6930 (remote_set_transparent_ranges): Don't declare exec_bfd.
6932 2009-05-21 Pedro Alves <pedro@codesourcery.com>
6934 * aix-thread.c (init_aix_thread_ops): Whitespace.
6936 2009-05-21 Pedro Alves <pedro@codesourcery.com>
6938 * dec-thread.c (dec_thread_wait): Add options parameter. Use it
6939 to call the to_wait method in the target beneath.
6940 * remote-m32r-sdi.c (m32r_wait): Add options parameter.
6942 2009-05-21 Joel Brobecker <brobecker@adacore.com>
6944 * aix-thread.c (aix_thread_wait): Add options parameter. Use it
6945 to call the to_wait method in the target_beneath.
6947 2009-05-21 Pedro Alves <pedro@codesourcery.com>
6949 * linux-nat.c (linux_nat_terminal_inferior)
6950 (linux_nat_terminal_ours): Don't check sync_execution.
6951 * remote.c (remote_terminal_inferior, remote_terminal_ours):
6952 Don't check sync_execution. Update comments.
6953 * target.c (target_terminal_inferior): New.
6954 * target.h (target_terminal_inferior): Delete macro, and declare
6956 * event-top.c (async_disable_stdin): Make idempotent. Don't give
6957 the target the terminal here.
6958 * inflow.c (terminal_ours_1): Don't return early without setting
6961 2009-05-21 Pedro Alves <pedro@codesourcery.com>
6963 * target.h (TARGET_WNOHANG): New.
6964 * target.c (target_wait): Add `options' argument. Adjust.
6965 (struct target_ops) <to_wait>: Add `options' argument.
6966 (target_wait): Add `options' argument.
6967 * infrun.c (wait_for_inferior): Pass 0 as options to
6968 target_wait (blocking wait).
6969 (fetch_inferior_event): Pass TARGET_WNOHANG as options to
6971 * fork-child.c (startup_inferior): Pass 0 as options to
6972 target_wait (blocking wait).
6973 * linux-nat.c (linux_nat_create_inferior): Remove async masking.
6974 (linux_nat_wait_1): Add `target_options' argument. Use it instead
6975 of checking on target_can_async_p.
6976 (linux_nat_wait): Add `target_options' argument. Adjust.
6977 * remote.c (remote_wait_ns): Add `options' argument. Adjust to
6978 check on TARGET_WNOWAIT instead of checking on remote_is_async_p.
6979 (remote_wait_as): Add `options' argument. Adjust to check on
6980 TARGET_WNOWAIT instead of checking on remote_is_async_p. If doing
6981 a blocking wait, keep waiting until an interesting event comes
6983 (remote_wait): Add `options' argument. Don't loop here if the
6984 target is in async mode, and a blocking wait has been requested.
6986 * top.c (deprecated_target_wait_hook): Add `options' argument.
6987 * linux-thread-db.c (thread_db_wait): Add `options' argument, and
6988 pass it down to the layer beneath.
6989 * inf-ptrace.c (inf_ptrace_wait): Add `options' argument.
6990 * record.c (record_beneath_to_wait): Add `options' argument.
6991 (record_wait): Add `options' argument, and pass it down to the
6993 * bsd-uthread.c (bsd_uthread_wait): Add `options' argument.
6994 * darwin-nat.c (darwin_wait): Likewise.
6995 * defs.h (deprecated_target_wait_hook): Likewise.
6996 * gnu-nat.c (gnu_wait): Add `options' argument.
6997 * go32-nat.c (go32_wait): Likewise.
6998 * hpux-thread.c (hpux_thread_wait): Add `options' argument, and
6999 pass it down to the layer beneath.
7000 * inf-ttrace.c (inf_ttrace_wait): Add `options' argument.
7001 * monitor.c (monitor_wait): Likewise.
7002 * nto-procfs.c (procfs_wait): Likewise.
7003 * remote-mips.c (mips_wait): Add `options' argument.
7004 * remote-sim.c (gdbsim_wait): Likewise.
7005 * rs6000-nat.c (rs6000_wait): Add `options' argument.
7006 * sol-thread.c (sol_thread_wait): Add `options' argument, and pass
7007 it down to the layer beneath.
7008 * spu-linux-nat.c (spu_child_wait): Add `options' argument.
7009 * windows-nat.c (windows_wait): Likewise.
7010 * tui/tui-hooks.c (tui_target_wait_hook): Likewise. Adjust.
7012 2009-05-21 Pedro Alves <pedro@codesourcery.com>
7014 * mi/mi-interp.c (mi_on_resume): Account for whole process
7017 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
7019 * m2-exp.y (MAX_FUNC): Fix trailing UNOP_MAX.
7021 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
7023 * dwarf2read.c (set_cu_language): Recognize also DW_LANG_C99.
7025 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
7027 Fix parsing DW_AT_const_value using DW_FORM_string.
7028 * dwarf2read.c (dwarf2_const_value <DW_FORM_string>): New.
7030 2009-05-20 Joel Brobecker <brobecker@adacore.com>
7032 * aix-thread.c (giter_count): Do not count the main thread.
7033 (giter_accum): Do not include the main thread.
7035 2009-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
7037 Remove the PROT parameter from openp.
7038 * source.c (openp): Remove the parameter PROT. Assertion check MODE.
7039 defs.h (openp): Update the prototype.
7040 Update all the openp callers.
7042 2009-05-19 Pedro Alves <pedro@codesourcery.com>
7044 * inflow.c (kill_command): Moved to infcmd.c.
7045 (_initialize_inflow): Don't add the "kill" command or clear
7047 * infcmd.c (kill_command): Moved here from inflow.c.
7048 (_initialize_infcmd): Add the "kill" command here.
7050 2009-05-19 Pedro Alves <pedro@codesourcery.com>
7052 * fork-child.c: Don't include frame.h. Include terminal.h.
7053 (fork_inferior): Call new_tty_postfork after forking adn adding
7054 the child to the inferior list.
7055 * inferior.h (new_tty_prefork, gdb_has_a_terminal): Don't declare
7057 * inflow.c (struct terminal_info): Remove const qualifier from
7058 `run_terminal' field.
7059 (inferior_thisrun_terminal): Tweak comment.
7060 (inflow_inferior_exit): Release the `run_terminal' field.
7061 (copy_terminal_info): New function.
7062 (new_tty_postfork): New function.
7063 * terminal.h (new_tty_prefork, new_tty, new_tty_postfork,
7064 (copy_terminal_info, gdb_has_a_terminal, gdb_setpgid): Declare.
7065 * inf-ptrace.c: Include terminal.h.
7066 (inf_ptrace_follow_fork): Copy the parent's terminal info to the
7068 * linux-nat.c: Include terminal.h.
7069 (linux_child_follow_fork): Copy the parent's terminal info to the
7071 * inf-ttrace.c: Include terminal.h.
7072 (inf_ttrace_follow_fork): Copy the parent's terminal info to the
7075 2009-05-19 Pedro Alves <pedro@codesourcery.com>
7077 * breakpoint.c (insert_breakpoints, breakpoint_init_inferior)
7078 (update_global_location_list): Use gdbarch_has_global_breakpoints
7079 instead of gdbarch_has_global_solist and
7080 target_supports_multi_process.
7081 * dicos-tdep.c (dicos_init_abi): Set
7082 gdbarch_has_global_breakpoints.
7083 * gdbarch.sh (has_global_solist): Update comment.
7084 (has_global_breakpoints): New.
7085 * remote.c (remote_start_remote): Use
7086 gdbarch_has_global_breakpoints instead of
7087 gdbarch_has_global_solist.
7088 * target.c (target_detach): Use gdbarch_has_global_breakpoints
7089 instead of gdbarch_has_global_solist.
7090 * infcmd.c (attach_command): Use gdbarch_has_global_solist instead
7091 of target_supports_multi_process.
7093 2009-05-18 Paul Pluzhnikov <ppluzhnikov@google.com>
7095 * objc-lang.c (find_methods): Plug a small memory leak.
7097 2009-05-18 Pedro Alves <pedro@codesourcery.com>
7099 * solib-svr4.c: Include observer.h.
7100 (debug_base, debug_loader_offset_p, debug_loader_offset)
7101 (debug_loader_name, main_lm_addr): Move these globals...
7102 (struct svr4_info): ... into this new structure.
7103 (svr4_info_p): New typedef.
7104 (svr4_info): New global.
7105 (get_svr4_info, remove_svr4_info, solib_svr4_inferior_exit): New
7107 (locate_base, solib_svr4_r_map, solib_svr4_r_brk)
7108 (solib_svr4_r_ldsomap): Add svr4_info argument. Adjust to
7110 (open_symbol_file_object): Adjust to per-inferior svr4.
7111 (svr4_default_sos, svr4_current_sos, svr4_fetch_objfile_link_map):
7113 (enable_break): Add svr4_info argument. Adjust to per-inferior
7115 (enable_break, svr4_solib_create_inferior_hook, svr4_clear_solib):
7116 Adjust to per-inferior svr4.
7117 (_initialize_svr4_solib): Install the solib_svr4_inferior_exit
7120 2009-05-18 Pedro Alves <pedro@codesourcery.com>
7122 * linux-nat.h (linux_proc_get_tgid): Declare.
7123 * linux-nat.c (linux_proc_get_tgid): New.
7124 * linux-thread-db.c (struct thread_db_info): New field
7125 `need_stale_parent_threads_check'.
7126 (add_thread_db_info): Set it.
7127 (find_new_threads_callback): Ignore stale fork parent threads.
7128 (thread_db_resume): New.
7129 (init_thread_db_ops): Install thread_db_resume.
7131 2009-05-18 Pedro Alves <pedro@codesourcery.com>
7133 * fork-child.c (fork_inferior): Only reset the thread list if this
7134 is the first inferior.
7135 (startup_inferior): If the target support multi-process, tell it
7136 to resume only the new process.
7137 * linux-nat.c (num_lwps): Delete global.
7138 (purge_lwp_list): New function.
7139 (num_lwps): New function.
7140 (add_lwp, delete_lwp): Adjust.
7142 (iterate_over_lwps): Add filter argument. Handle it.
7143 (linux_nat_attach): Remove FIXME note.
7144 (linux_nat_detach): Adjust to iterate over threads of the inferior
7145 we're detaching from. Adjust to num_lwps being a function. Don't
7146 assume the head of the lwp list is the main thread of the process
7147 we're detaching from. Don't destroy the LWP list.
7148 (resume_callback): Add debug output.
7149 (linux_nat_resume): Handle resuming a single inferior. Allow a
7150 wildcard resume in non-stop mode.
7151 (linux_handle_extended_wait): Don't assume inferior_ptid is the
7152 correct inferior of the parent LWP.
7153 (status_callback): Also check lp->waitstatus.
7154 (select_event_lwp): Add new filter parameter. Handle it.
7155 (linux_nat_filter_event): Adjust to num_lwps being a function.
7156 (linux_nat_wait_1): When adding the first lwp of the inferior, use
7157 an is_lwp check instead of checking for the number of lwps.
7158 (linux_nat_wait_1): Handle waiting for a specific tgid. Handle
7159 pending process exit statuses.
7160 (linux_nat_mourn_inferior): Don't destroy all the LWP info.
7161 Instead delete LWPs of the inferior that we're mourning. Don't
7162 unregister from the event loop here.
7163 (linux_nat_pid_to_str): Use `num_lwps'.
7164 (linux_nat_make_corefile_notes): Adjust to walk over lwps of a
7166 (linux_nat_is_async_p): Check if async was masked out.
7167 (linux_multi_process): New global.
7168 (linux_nat_supports_multi_process): New.
7169 (linux_nat_stop_lwp): Remove LWP filtering. It is done by the
7171 (linux_nat_stop): Adjust to make iterate_over_lwps itself do the
7173 (linux_nat_close): New.
7174 (linux_nat_add_target): Register linux_nat_close and
7175 linux_nat_supports_multi_process.
7176 * linux-nat.h (iterate_over_lwps): Add filter argument.
7177 * linux-thread-db.c (thread_db_handle): Delete.
7178 (proc_handle, thread_agent, td_init_p, td_ta_new_p)
7179 (td_ta_map_id2thr_p, td_ta_map_lwp2thr_p, td_ta_thr_iter_p)
7180 (td_ta_event_addr_p, td_ta_set_event_p, td_ta_event_getmsg_p)
7181 (td_thr_validate_p, td_thr_get_info_p, td_thr_event_enable_p)
7182 (td_thr_tls_get_addr_p, td_create_bp_addr, td_death_bp_addr): No
7183 longer globals, moved to...
7184 (struct thread_db_info): ... this new structure.
7185 (thread_db_list): New.
7186 (add_thread_db_info, get_thread_db_info, delete_thread_db_info):
7188 (have_threads_callback): Filter out threads of all inferiors but
7189 the one specified by the ARGS argument.
7190 (have_threads): Add ptid argument specifying the inferior we're
7191 interested in. Handle it.
7192 (struct thread_get_info_inout): New.
7193 (thread_get_info_callback, thread_from_lwp): Adjust to use it.
7194 (thread_db_attach_lwp): Check that inferior of the passed in
7195 thread is using thread-db. Adjust.
7196 (enable_thread_event): Remove thread_agent parameter. Instead,
7197 get it from the per-inferior thread-db info.
7198 (dladdr_to_soname): Move higher up.
7199 (enable_thread_event_reporting): Adjust to use per-inferior
7201 (try_thread_db_load_1): Replace `handle' parameter by a
7202 thread_db_info parameter. Adjust to use per-inferior thread-db
7204 (try_thread_db_load): Adjust to use per-inferior thread-db info.
7205 (thread_db_load, disable_thread_event_reporting): Ditto.
7206 (check_for_thread_db): Remove conditional reporting of which
7207 libthread_db is in use.
7208 (thread_db_new_objfile): Add comment about inferior_ptid.
7209 (attach_thread): Adjust to use per-inferior thread-db info.
7210 (thread_db_detach): Adjust to use per-inferior thread-db info.
7211 Remove thread event breakpoints of the current inferior. Only
7212 unpush the thread-db target if there are no more processes using
7214 (check_event): Adjust to use per-inferior thread-db info.
7215 (thread_db_wait): Adjust to use per-inferior thread-db info. Only
7216 unpush the thread-db target if there are no more processes using
7218 (thread_db_mourn_inferior): Adjust to use per-inferior thread-db
7219 info. Mark breakpoints of the current inferior out before
7220 deleting them. Only unpush the thread-db target if there are no
7221 more processes using it.
7222 (find_new_threads_callback): Adjust to use per-inferior thread_db
7224 (thread_db_find_new_threads_1): Add new ptid argument. Adjust to
7225 use per-inferior thread-db info.
7226 (thread_db_find_new_threads): Adjust to use per-inferior thread-db
7228 (thread_db_get_thread_local_address): Adjust.
7229 (thread_db_get_ada_task_ptid): Adjust.
7230 * inf-ptrace.c (inf_ptrace_mourn_inferior): Only unpush the target
7231 if there no more processes left to debug.
7232 * thread.c (set_running, set_executing): Handle resuming all
7233 threads of a single inferior.
7234 * mi/mi-interp.c (mi_output_running_pid): New.
7235 (mi_inferior_count): New.
7236 (mi_on_resume): For backwards compatibility, if resuming all
7237 threads of an inferior, and there is only one inferior, output
7240 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
7242 * ada-lang.c (ada_find_any_type): Move check for primitive types ...
7243 (to_fixed_range_type): ... to here.
7245 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
7247 * ada-lang.c (desc_data_type): Remove, replace by ...
7248 (desc_data_target_type): ... this.
7249 (thin_data_pntr): Use desc_data_target_type instead of desc_data_type.
7250 (ada_is_array_descriptor_type): Likewise.
7251 (ada_type_of_array): Likewise.
7252 (ada_coerce_to_simple_array_type): Likewise.
7253 (ada_array_element_type): Likewise.
7255 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
7257 * ada-valprint.c (ada_val_print_1): Use val_print_string to print
7258 result of ada_vax_float_print_function inferior call.
7260 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
7262 * ada-lang.c (ada_coerce_to_simple_array_type): Reimplement to
7263 avoid creating a dummy value.
7265 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
7267 * p-valprint.c (pascal_val_print): Use extract_typed_address
7268 to extract reference value.
7270 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
7272 * doublest.c (NAN): Remove unused define.
7273 (extract_floating_by_length, deprecated_extract_floating): Remove.
7274 (store_floating_by_length, deprecated_store_floating): Remove.
7275 (extract_typed_floating): Do not call extract_floating_by_length.
7276 (store_typed_floating): Do not call store_floating_by_length.
7277 (convert_typed_floating): Remove redundant assertions.
7278 * doublest.h (deprecated_extract_floating): Remove.
7279 (deprecated_store_floating): Remove.
7280 * sh64-tdep.c (sh64_register_convert_to_raw): Call
7281 extract_typed_floating instead of deprecated_extract_floating.
7283 2009-05-18 Jon Beniston <jon@beniston.com>
7285 * MAINTAINERS: Add lm32 target.
7286 * Makefile.in: Add lm32 dependencies.
7287 * NEWS: Indicate lm32 is a new target.
7288 * configure.tgt: Add lm32 targets.
7289 * lm32-tdep.c: New file.
7291 2009-05-18 Pedro Alves <pedro@codesourcery.com>
7293 * corelow.c (core_open): Flush the register cache before doing
7294 anything with registers.
7296 2009-05-18 Pedro Alves <pedro@codesourcery.com>
7298 * inflow.h (our_process_group): Remove declaration.
7299 (inferior_process_group): Delete global variable declaration.
7300 (inferior_process_group): New function declaration.
7301 * inflow.c: Include observer.h.
7302 (inferior_ttystate, our_ttystate, tflags_inferior, tflags_ours):
7304 (struct terminal_info): New struct.
7305 (our_terminal_info): New global.
7306 (inferior_process_group): New function.
7307 (inferior_thisrun_terminal): Extend description comment.
7308 (gdb_has_a_terminal): Adjust to write to our_terminal_info fields
7310 (terminal_init_inferior_with_pgrp): Adjust to per-inferior
7312 (terminal_inferior): Ditto.
7313 (terminal_ours_1): Ditto.
7314 (inflow_new_inferior, inflow_inferior_exit): New functions.
7315 (child_terminal_info): Adjust to per-inferior terminal settings.
7316 (osig_set): New global.
7317 (set_sigint_trap): Adjust to per-inferior terminal settings. Set
7318 or clear `osig_set' accordingly.
7319 (clear_sigint_trap): Check `osig_set' to decide wheater to restore
7320 SIGINT handler, instead of checking the current inferior (which
7322 (_initialize_inflow): Attach inflow_new_inferior and
7323 inflow_inferior_exit to the "new_inferior" and "inferior_exit"
7324 notifications, respectively.
7325 * inferior.h (struct terminal_info): Forward declare.
7326 (struct inferior): Add `terminal_info' field.
7327 * inferior.c (delete_inferior_1): Notify the inferior_exit
7328 observers before removing the inferior from the lists and deleting
7330 * inf-ptrace.c (inf_ptrace_stop): `inferior_process_group' is now
7331 a function instead of a variable. Adjust.
7332 * procfs.c (procfs_stop): Ditto.
7334 2009-05-17 Pedro Alves <pedro@codesourcery.com>
7336 * infrun.c (handle_inferior_event): When handling a
7337 TARGET_WAITKIND_FORKED, detach breakpoints from the fork child
7339 * linux-nat.c (linux_child_follow_fork): Only detach breakpoints
7340 from the child if vforking.
7341 * inf-ptrace.c (inf_ptrace_follow_fork): No need to detach
7342 breakpoints from the child here.
7344 2009-05-17 Pedro Alves <pedro@codesourcery.com>
7346 * infrun.c (pending_follow): Remove execd_pathname member.
7347 (resume): No longer handle TARGET_WAITKIND_EXECD pending follow.
7348 (handle_inferior_event): When handling a TARGET_WAITKIND_EXECD
7349 event, don't copy `execd_pathname' to pending_follow, use the
7350 event copy instead. Release `execd_pathname' once done with
7353 * infrun.c (pending_follow): Remove mention of exec events.
7355 2009-05-17 Hui Zhu <teawater@gmail.com>
7357 * i386-tdep.c (i386_process_record): Make it extern.
7358 (i386_gdbarch_init): Don't call set_gdbarch_process_record
7360 * i386-tdep.h (i386_process_record): Declare.
7361 * i386-linux-tdep.c (i386_linux_init_abi): Call
7362 set_gdbarch_process_record.
7364 2009-05-17 Vladimir Prus <vladimir@codesourcery.com>
7366 Always report varobj as changed when in_scope attribute changes.
7368 * varobj.c (install_new_value): If non-NULL-ness of value
7371 2009-05-15 Paul Pluzhnikov <ppluzhnikov@google.com>
7373 * NEWS: Mention set/show libthread-db-search-path.
7374 * gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): New define.
7375 (LIBTHREAD_DB_SO): Moved from linux-thread-db.c
7376 * linux-thread-db.c (libthread_db_search_path): New setting.
7377 (thread_db_handle): New variable (replaces using_thread_db).
7378 (try_thread_db_load_1): New function.
7379 (try_thread_db_load, thread_db_load_search): Likewise.
7380 (dladdr_to_soname): Likewise.
7381 (thread_db_load): Iterate over possibly multiple libthread_db's.
7382 (check_for_thread_db): Attempt to load new libthread_db.
7383 (thread_db_detach, thread_db_wait): Unload libthread_db.
7384 (thread_db_mourn_inferior): Likewise.
7385 (_initialize_thread_db): Add new libthread-db-search-path option.
7386 Defer loading of libthread_db to check_for_thread_db.
7387 * solib.c (libpthread_name_p): New function.
7388 (libpthread_solib_p): Call it.
7389 * solib.h (libpthread_name_p): New prototype.
7391 2009-05-15 Pierre Muller <muller@ics.u-strasbg.fr>
7393 * MAINTAINERS: Update my email address.
7395 2009-05-14 Paul Pluzhnikov <ppluzhnikov@google.com>
7397 * breakpoint.h: Add breakpoint_re_set_objfile prototype.
7398 * breakpoint.c (create_overlay_event_breakpoint): Renamed
7399 from create_overlay_event_breakpoint_1, old
7400 create_overlay_event_breakpoint deleted.
7401 (breakpoint_re_set_objfile): Don't rescan all objfiles
7403 (breakpoint_re_set): New function.
7404 * symfile.c (new_symfile_objfile): Call breakpoint_re_set_objfile
7405 instead of breakpoint_re_set.
7406 * objfiles.c (objfile_relocate): Likewise.
7408 2009-05-14 Joel Brobecker <brobecker@adacore.com>
7410 * gdbarch.sh: Add comment documenting the target_gdbarch global.
7411 gdbarch.h does NOT need to be regenerated as the corresponding
7412 change has already been made in a previous commit.
7414 2009-05-14 Pierre Muller <muller@ics.u-strasbg.fr>
7416 Remove all i386 debug register low level macros in config nm files.
7417 (I386_DR_LOW_SET_ADDR, I386_DR_LOW_RESET_ADDR): Remove.
7418 (I386_DR_LOW_GET_STATUS, I386_DR_LOW_SET_CONTROL): Remove.
7419 (I386_USE_GENERIC_WATCHPOIINTS): Remove.
7421 * i386-nat.h: New file (adapted from config/i386/nm-i386.h).
7422 (struct i386_dr_low_type): New type.
7423 (i386_dr_low): New global variable.
7424 * i386-nat.c (TARGET_HAS_DR_LEN_8): Update macro.
7425 (i386_insert_aligned_watchpoint): Replace i386 dr low macros by
7426 i386_dr_low struct variable fields.
7427 (i386_remove_aligned_watchpoint): Likewise.
7428 (i386_stopped_data_address): Likewise.
7429 (i386_stopped_by_hwbp): Likewise.
7430 (show_debug_regs_command_added): New static variable.
7431 (add_show_debug_regs_command): New static function.
7432 (i386_use_watchpoints): Call add_show_debug_regs_command if not done.
7433 (i386_set_debug_register_length): New function.
7434 (_initialize_i386_nat): Delete.
7436 * amd64-linux-nat.c: Include "i386-nat.h".
7437 (amd64_linux_dr_set_control): Change to static.
7438 (amd64_linux_dr_get_status): Change to static.
7439 (amd64_linux_dr_set_addr,amd64_linux_dr_reset_addr): Likewise.
7440 (_initialize_amd64_linux_nat): Set i386_dr_low variable fields.
7442 * go32-nat.c: Include "i386-nat.h".
7443 (go32_set_addr): Change to static.
7444 (go32_set_dr7): Change to static. Change arg type to unisgned long.
7445 (go32_get_dr6): Change to static. Change return type to unisnged long.
7446 (init_go32_ops): Set i386_dr_low variable fields.
7447 * i386-linux-nat.c: Include "i386-nat.h".
7448 (i386_linux_dr_set_control, i386_linux_dr_get_status): Change to static.
7449 (i386_linux_dr_set_addr, i386_linux_dr_reset_addr): Idem.
7450 (_initialize_i386_linux_nat): Set i386_dr_low variable fields.
7451 * i386bsd-nat.h: Declare functions used for
7452 i386_dr_low fields in i386fbsd-nat.c.
7453 * i386fbsd-nat.c: Include "i386-nat.h".
7454 (_initialize_i386fbsd_nat): Set i386_dr_low variable fields.
7455 * windows-nat.c: Include "i386-nat.h".
7456 (cygwin_set_dr, cygwin_get_dr6, cygwin_set_dr7): Add prototypes.
7458 (cygwin_get_dr6): Change return type to unisnged long.
7459 (cygwin_set_dr7): Change arg type to unisgned long.
7460 (init_windows_ops): Set i386_dr_low function fields.
7462 * amd64-windows-nat.c (_initialize_amd64_windows_nat): Call
7463 i386_set_debug_register_length.
7464 * i386-windows-nat.c (_initialize_i386_windows_nat): Likewise.
7466 * config/i386/nm-cygwin.h: Remove all I386_* macros.
7467 * config/i386/nm-cygwin64.h: Likewise.
7468 * config/i386/nm-fbsd.h: Likewise.
7469 * config/i386/nm-linux.h: Likewise.
7470 * config/i386/nm-i386.h: Remove completely.
7471 * config/i386/nm-go32.h: Remove completely.
7472 * config/i386/nm-linux64.h: Remove completely.
7473 * config/i386/go32.mh (NAT_FILE): Remove entry.
7474 * config/i386/linux64.h (NAT_FILE): Change to config/nm-linux.h.
7476 2009-05-14 Jon Beniston <jon@beniston.com>
7478 * MAINTAINERS: Add Jon Beniston to write after approval list.
7480 2009-05-13 Paul Pluzhnikov <ppluzhnikov@google.com>
7482 * objc-lang.c (objc_objfile_data): New variable.
7483 (find_methods): Skip objfiles without Obj-C methods.
7484 (_initialize_objc_lang): New function.
7486 2009-05-13 Joel Brobecker <brobecker@adacore.com>
7488 * c-lang.c (print_wchar): Remove unnecessary cast.
7490 2009-05-12 Jim Blandy <jimb@red-bean.com>
7492 * MAINTAINERS: Remove self as m32c target maintainer.
7494 2009-05-12 Pedro Alves <pedro@codesourcery.com>
7496 * cli/cli-decode.c (deprecated_add_set_cmd): Delete.
7497 * command.h (deprecated_add_set_cmd): Delete declaration.
7498 * gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
7499 'set debug gnu-nat' and 'show debug gnu-nat'.
7500 * i386-nat.c (_initialize_i386_nat): Replace 'maint
7501 show-debug-registers' with 'maint set show-debug-registers' and
7502 'maint show show-debug-registers'.
7503 * mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
7504 show-debug-registers' with 'maint set show-debug-registers' and
7505 'maint show show-debug-registers'.
7507 2009-05-12 Joel Brobecker <brobecker@adacore.com>
7509 * c-lang.c (print_wchar): Convert w into a gdb_wchar_t before
7510 pushing it on the output obstack.
7512 2009-05-11 Joel Brobecker <brobecker@adacore.com>
7514 Fix internal error on breaking at a multi-locations caller source line.
7515 * breakpoint.c (parse_breakpoint_sals): Set EXPLICIT_PC for the `break'
7516 command with no parameters.
7518 2009-05-11 Pedro Alves <pedro@codesourcery.com>
7520 * linux-nat.c (enum sigchld_state): Delete.
7521 (linux_nat_async_events_state): Delete.
7522 (struct waitpid_result): Delete.
7523 (waitpid_queue): Delete.
7524 (queued_waitpid_1): Delete.
7525 (async_file_flush): New.
7526 (queued_waitpid, push_waitpid): Delete.
7527 (async_file_mark): New.
7528 (drain_queued_events): Delete.
7529 (my_waitpid): Remove locally queued events handling.
7530 (linux_test_for_tracefork): Upjust.
7531 (linux_child_follow_fork): Ditto.
7532 (sync_sigchld_action): Delete.
7533 (blocked_mask): Reinstate.
7534 (async_sigchld_action): Rename to...
7535 (sigchld_action): ... this.
7536 (block_child_signals): New.
7537 (restore_child_signals_mask): New.
7538 (lin_lwp_attach_lwp): Adjust.
7539 (linux_nat_create_inferior): Ditto.
7540 (linux_nat_attach): Also use lp->status in async mode.
7541 (get_pending_status): Don't use queued_waitpid.
7542 (linux_nat_detach): Don't drain locally queued events.
7543 (linux_nat_resume): Allow pending wait statuses stored lp->status
7544 in async mode. If returning early due to a pending event,
7545 re-register the event source.
7546 (stop_wait_callback): Allow pending wait statuses stored
7547 lp->status in async mode.
7548 (pipe_to_local_event_queue, local_event_queue_to_pipe): Delete.
7549 (linux_nat_wait): Rename to ...
7550 (linux_nat_wait_1): ... this. Allow pending wait statuses stored
7551 lp->status in async mode. Always add WNOHANG to the waitpid
7552 options in async mode.
7553 (linux_nat_wait): New.
7554 (kill_callback): Don't drain locally queued events.
7555 (sigchld_handler): Rewrite.
7556 (linux_nat_is_async_p, linux_nat_can_async_p): Fix comments to
7557 refer to "set target-async".
7558 (linux_nat_async_mask): If in non-stop, and re-enabling async
7559 mode, re-register the target event source in the event loop.
7560 (linux_nat_event_pipe_pop, linux_nat_event_pipe_push)
7561 (get_pending_events, async_sigchld_handler)
7562 (linux_nat_async_events): Delete.
7563 (handle_target_event): New.
7564 (linux_nat_async_file_handler): Delete.
7565 (linux_async_pipe): New.
7566 (linux_nat_async): Only re-register in the event loop if not
7567 registered yet. Always notify the event-loop once if enabling the
7569 (linux_nat_stop_lwp): Rewrite to handle pending events stored in
7570 lp->status, not in the locally queued event list.
7571 (linux_nat_stop): Don't mask out async event handling.
7572 (linux_nat_setup_async): Delete.
7573 (_initialize_linux_nat): Adjust.
7574 (lin_thread_get_thread_signals): blocked_mask is global again.
7577 2009-05-11 Pierre Muller <muller@ics.u-strasbg.fr>
7579 Unify target macros.
7581 * target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ...
7582 (target_stoppped_by_watchpoint): New macro.
7583 (HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ...
7584 (target_have_steppable_watchpoint): New macro.
7585 (HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ...
7586 (target_have_continuable_watchpoint): New macro.
7587 (TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ...
7588 (target_can_use_hardware_watchpoint): New macro.
7589 (TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ...
7590 (target_region_ok_for_hw_watchpoint): New macro.
7592 * breakpoint.c (update_watchpoint): Use new macros.
7593 (bpstat_alloc): Likewise.
7594 (create_breakpoint): Likewise.
7595 (watch_command_1): Likewise.
7596 (can_use_hardware_watchpoint): Likewise.
7597 (do_enable_breakpoint): Likewise.
7598 * infrun.c (handle_inferior_event): Adapt to new macros.
7599 * mips-tdep.c (mips_gdbarch_init): Update comments.
7600 * procfs.c (procfs_set_watchpoint): Update comment.
7601 (procfs_insert_watchpoint): Adapt to new macros.
7602 * remote-m32r-sdi.c (m32r_stop):
7603 * remote-mips.c (mips_remove_breakpoint):
7604 * target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros.
7605 (debug_to_stopped_by_watchpoint): Likewise.
7608 2009-05-10 Pierre Muller <muller@ics.u-strasbg.fr>
7610 * src/gdb/target.h: Remove all tests for already defined
7611 macros. All macros defined here should not be set in config
7614 2009-05-08 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
7616 * ppc-linux-nat.c (have_ptrace_getsetregs): New variable.
7617 (have_ptrace_getsetfpregs): Likewise.
7618 fetch_all_gp_regs): New function.
7619 (fetch_gp_regs): New function.
7620 (fetch_all_fp_regs): Likewise.
7621 (fetch_fp_regs): New function.
7622 (fetch_ppc_registers): Using the new methods to fetch general-
7623 purpose and floating-pointer registers.
7624 (store_all_gp_regs): New function.
7625 (store_gp_regs): Likewise.
7626 (store_all_fp_regs): New function.
7627 (store_fp_regs): Likewise.
7628 (store_ppc_registers): Using the new methods to store general-
7629 purpose and floating-pointer registers.
7631 2009-05-08 Doug Evans <dje@google.com>
7633 * linux-nat.c (linux_xfer_siginfo): Delete unused locals lp, n.
7635 2009-05-07 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
7637 * MAINTAINERS (Write After Approval): Add self.
7639 2009-05-07 Joel Brobecker <brobecker@adacore.com>
7641 * gdbarch.h (target_gdbarch): Add comment documenting this global.
7643 2009-05-06 Joel Brobecker <brobecker@adacore.com>
7645 * acinclude.m4 (AM_ICONV): Prefer in-tree libiconv if present over
7647 * configure: Regenerate.
7649 2009-05-06 Joel Brobecker <brobecker@adacore.com>
7651 * utils.c: Add include of gdb_usleep.h.
7652 (defaulted_query): Detect false EOF conditions that happen
7653 on terminals opened with the O_NONBLOCK flag when there is
7656 2009-05-06 Pedro Alves <pedro@codesourcery.com>
7658 * inferior.c (add_inferior): Move observer_notify_new_inferior
7660 (add_inferior_silent): ... here.
7662 2009-05-06 Pierre Muller <muller@ics.u-strasbg.fr>
7663 Pedro Alves <pedro@codesourcery.com>
7665 * procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)
7666 (procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New
7668 (procfs_stopped_by_watchpoint): Made static, ptid argument
7670 (_initialize_procfs): Register new watchpoint related target
7672 * config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT)
7673 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT)
7674 (HAVE_CONTINUABLE_WATCHPOINT): Delete.
7675 (target_insert_watchpoint, target_remove_watchpoint): Delete.
7676 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
7678 * config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT)
7679 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
7680 (target_insert_watchpoint, target_remove_watchpoint): Delete.
7681 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
7683 * config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
7684 (HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete.
7685 (target_insert_watchpoint, target_remove_watchpoint): Delete.
7686 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
7689 2009-05-06 Hui Zhu <teawater@gmail.com>
7691 * i386-tdep.c (i386_process_record): Change bzero to memset.
7693 2009-05-06 Hui Zhu <teawater@gmail.com>
7695 * NEWS: Add item for process record and replay.
7697 2009-05-05 Maxim Grigoriev <maxim2405@gmail.com>
7699 * xtensa-tdep.c (xtensa_frame_cache): Use pc instead of cache->pc.
7701 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
7703 * inferior.h (read_pc, write_pc): Remove.
7704 * regcache.c (read_pc, write_pc): Remove.
7706 * infrun.c (displaced_step_fixup): Use regcache_read_pc instead
7708 (handle_inferior_event): Use regcache_read_pc instead of read_pc
7709 when determining value of stop_pc. Replace subsequent uses of
7710 read_pc by inspecting already-retrieved stop_pc value.
7711 (keep_going): Use regcache_read_pc instead of read_pc.
7713 * breakpoint.c (watchpoint_check): Use current frame architecture
7714 and PC instead of current_gdbarch and read_pc ().
7715 * tracepoint.c (set_traceframe_context): Replace PC argument
7716 with FRAME argument.
7717 (trace_start_command, finish_tfind_command): Update calls.
7718 (finish_tfind_command): Compare frame IDs to identify transitions
7720 (trace_find_pc_command): Use regcache_read_pc instead of read_pc.
7721 * rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
7722 of gdbarch. Use regcache_read_pc and regcache_write_pc instead
7723 of read_pc and write_pc.
7724 (store_register): Make regcache argument non-const. Update call
7725 to exec_one_dummy_insn.
7727 * thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
7728 * infcmd.c (post_create_inferior): Likewise.
7729 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
7730 * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
7731 * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
7732 * solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
7733 * linux-fork.c (fork_load_infrun_state): Likewise.
7734 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
7735 * record.c (record_wait): Likewise.
7736 * procfs.c (procfs_wait): Likewise.
7737 * remote-mips.c (common_open, mips_wait): Likewise.
7738 * remote-m32r-sdi.c (m32r_resume): Likewise.
7740 * symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
7741 * monitor.c (monitor_create_inferior, monitor_load): Likewise.
7742 * m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
7743 * remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
7744 * remote-mips.c (mips_create_inferior, mips_load): Likewise.
7746 * solib-darwin.c: Include "regcache.h".
7747 * solib-pa64.c: Include "regcache.h".
7748 * solib-svr4.c: Include "regcache.h.".
7750 * symfile.c: Do not mention read_pc or write_pc in comments.
7751 * dink32-rom.c: Likewise.
7752 * m32r-rom.c: Likewise.
7753 * mips-tdep.c: Likewise.
7755 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
7757 * fork-child.c (startup_inferior): Move setting stop_pc ...
7758 * infcmd.c (post_create_inferior): ... to here.
7760 2009-05-04 Michael Snyder <msnyder@vmware.com>
7762 * NEWS: Add item for reverse debugging commands.
7764 2009-05-04 Pedro Alves <pedro@codesourcery.com>
7766 * go32-nat.c (go32_stop): Delete.
7767 (go32_kill_inferior): Rewrite to only call go32_mourn_inferior.
7768 (go32_create_inferior): Don't call go32_stop or
7770 (go32_mourn_inferior): Inline go32_stop and go32_kill_inferior
7772 (init_go32_ops): Don't register go32_stop.
7774 2009-05-02 Eli Zaretskii <eliz@gnu.org>
7776 * dbxread.c (read_dbx_symtab): Avoid compiler warnings for
7779 * infcall.c (find_function_addr): Avoid compiler warnings for
7782 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
7784 * dictionary.c (dict_hashed_vector, dict_hashed_expandable_vector)
7785 (dict_linear_vector, dict_linear_expandable_vector): Fix a comment typo.
7787 2009-05-01 Doug Evans <dje@google.com>
7789 * linux-thread-db.c (thread_db_pid_to_str): Delete unused assignment
7792 2009-05-01 Eli Zaretskii <eliz@gnu.org>
7794 * record.c (_initialize_record): Reformat and clarify doc strings
7795 for stop-at-limit and insn-number-max.
7797 * go32-nat.c: Add comments about dirty secrets of DJGPP debugging.
7799 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
7801 Make specifiable the make_function_type type memory ownership.
7802 * gdbtypes.c (make_function_type): New parameter `objfile', use it
7803 explicitely instead of TYPE-initialized removed local variable
7804 `objfile'. Describe `objfile' it in the function comment.
7805 (lookup_function_type): Update make_function_type callers.
7806 * gdbtypes.h (make_function_type): Update the prototype.
7807 * jv-lang.c (java_link_class_type): Update make_function_type callers.
7808 * dwarf2read.c (read_subroutine_type): Likewise.
7809 * stabsread.c (read_type): Likewise.
7811 2009-05-01 Eli Zaretskii <eliz@gnu.org>
7813 * go32-nat.c (go32_pid_to_str): Call normal_pid_to_str instead of
7814 printing a bogus "Thread <main>".
7815 (go32_thread_alive): Don't return 1 for null_ptid.
7817 * i386-tdep.c (i386_go32_init_abi): Override the number of
7818 registers due to non-support of SSE.
7820 2009-04-30 Anthony Green <green@moxielogic.com>
7822 * configure.tgt: Link the moxie simulator in with gdb.
7824 2009-04-30 Paul Pluzhnikov <ppluzhnikov@google.com>
7826 * elfread.c (elf_symtab_read): Don't assume .data and .rodata
7829 2009-04-30 Hui Zhu <teawater@gmail.com>
7830 Michael Snyder <msnyder@vmware.com>
7832 I386 Linux process record and replay support.
7834 * i386-linux-tdep.c (i386_linux_record_tdep): New variable.
7835 This struct has the argument for the function
7836 "record_linux_system_call".
7837 (i386_linux_intx80_sysenter_record): New function. Parse the
7838 system call instruction and call function
7839 "record_linux_system_call" to record execute log.
7840 (i386_linux_init_abi): Initialize "i386_linux_record_tdep".
7841 Set "i386_linux_intx80_sysenter_record" to
7842 "i386_intx80_record" and "i386_sysenter_record".
7844 2009-04-30 Hui Zhu <teawater@gmail.com>
7845 Michael Snyder <msnyder@vmware.com>
7847 I386 architecture process record and replay support.
7849 * i386-tdep.c (PREFIX_REPZ, PREFIX_REPNZ, PREFIX_LOCK,
7850 PREFIX_DATA, PREFIX_ADDR): New macros. Help decode the i386
7852 (aflag, dflag, override, modrm, mod, reg, rm, ot,
7853 i386_record_pc): New variables. Ditto.
7854 (i386_record_modrm, i386_record_lea_modrm_addr,
7855 i386_record_lea_modrm): New functions. Ditto.
7856 (i386_process_record): New function. Parse the instruction in
7857 address "addr" and record the values of registers and memory
7858 that will be changed by this instruction.
7859 (i386_gdbarch_init): Set "i386_process_record" to GDBARCH
7860 "process_record" interface.
7861 * i386-tdep.h (gdbarch_tdep): New function pointers
7862 "i386_intx80_record" and "i386_sysenter_record" that point to
7863 the function that can record "intx80" and "sysenter" execute
7866 2009-04-30 Hui Zhu <teawater@gmail.com>
7867 Michael Snyder <msnyder@vmware.com>
7869 * infrun.c (use_displaced_stepping): Return false if process
7870 record and replay target is used.
7871 (proceed): Call function "record_not_record_set" if pocess
7872 record and replay target is used.
7874 2009-04-30 Hui Zhu <teawater@gmail.com>
7875 Michael Snyder <msnyder@vmware.com>
7877 Linux process record and replay support.
7879 * Makefile.in (ALLDEPFILES): Add linux-record.c.
7880 (ALL_TARGET_OBS): Add linux-record.o.
7881 * configure.tgt (x86_64-*-linux*): Add linux-record.o.
7882 (i[34567]86-*-linux*): Add linux-record.o.
7883 * linux-record.c, linux-record.h: New file.
7885 2009-04-30 Hui Zhu <teawater@gmail.com>
7886 Michael Snyder <msnyder@vmware.com>
7888 Process record and replay target.
7890 * Makefile.in (SFILES): Add record.c.
7891 (COMMON_OBS): Add record.o.
7892 * record.c, record.h: New file.
7894 2009-04-30 Hui Zhu <teawater@gmail.com>
7895 Michael Snyder <msnyder@vmware.com>
7897 * target.h (strata): New stratum "record_stratum".
7899 2009-04-30 Hui Zhu <teawater@gmail.com>
7900 Michael Snyder <msnyder@vmware.com>
7902 GDBARCH interface for process record and replay.
7904 * gdbarch.sh (process_record): This interface point to the
7905 function that records the inferior execute log.
7907 2009-04-29 Doug Evans <dje@google.com>
7909 * i386-nat.c (child_post_startup_inferior): Delete, unused.
7911 2009-04-29 Pedro Alves <pedro@codesourcery.com>
7913 * breakpoint.c (print_exception_catchpoint): Access `b' directly
7914 instead of `b->loc->owner'.
7915 (print_mention_exception_catchpoint): Ditto.
7917 2009-04-29 Jan Kratochvil <jan.kratochvil@redhat.com>
7919 * macrocmd.c (info_macro_command): Print -Dname=value if LINE is zero.
7921 2009-04-27 Tom Tromey <tromey@redhat.com>
7923 * c-exp.y (yylex): Handle '[' and ']' like '(' and ')'.
7925 2009-04-27 Jerome Guitton <guitton@adacore.com>
7927 * symtab.c (append_exact_match_to_sals): New function, extracted
7928 from expand_line_sal.
7929 (expand_line_sal): Use append_exact_match_to_sals to append exact
7930 matches. If none found, append all best items.
7932 2009-04-27 Jerome Guitton <guitton@adacore.com>
7934 * main.c (captured_main): Move gdbinit lookups after gdb_init.
7936 2009-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
7939 * dwarf2read.c (unsigned_int_compar, inherit_abstract_dies): New.
7940 (read_func_scope): Call inherit_abstract_dies.
7942 2009-04-25 Eli Zaretskii <eliz@gnu.org>
7944 * Makefile.in (ALLDEPFILES): Remove duplicate entries for
7945 sparc-sol2-nat.c and sparc-sol2-tdep.c.
7947 * stack.c (_initialize_stack) <disassemble-next-line>: Doc fix.
7949 2009-04-24 Pierre Muller <muller@ics.u-strasbg.fr>
7951 ARI change: Use "/* ARI: rule */" pattern.
7952 * utils.c: Update ARI patterns.
7953 * gdb_dirent.h: Likewise.
7955 2009-04-23 Anthony Green <green@moxielogic.com>
7957 * MAINTAINERS: Add moxie target.
7958 * configure.tgt: Add moxie-*-elf target.
7959 * moxie-tdep.c: New file.
7960 * moxie-tdep.h: New file.
7962 2009-04-23 Joel Brobecker <brobecker@adacore.com>
7964 * ada-lang.c: Remove an extra empty line. No code change.
7966 2009-04-23 Jan Kratochvil <jan.kratochvil@redhat.com>
7968 Fix double free on error inserting the breakpoint instruction.
7969 * breakpoint.c (create_breakpoints): Move the
7970 update_global_location_list call to ...
7971 (break_command_really): ... here together with the second local call
7972 both unified after all the cleanups.
7974 2009-04-23 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
7975 Tom Tromey <tromey@redhat.com>
7977 * configure, config.in: Regenerate.
7978 * configure.ac: Support for relocatable GDB datadir. Use
7979 GDB_AC_WITH_DIR. Always define TARGET_SYSTEM_ROOT_RELOCATABLE.
7980 * acinclude.m4 (GDB_AC_WITH_DIR): New defun.
7981 * top.c (init_main): Add "set data-directory".
7982 * defs.h (gdb_datadir): Declare.
7983 * main.c (gdb_datadir): New global.
7984 (captured_main): Initialize gdb_datadir. Use relocate_directory.
7985 (relocate_path): New function.
7986 (relocate_directory): Likewise.
7987 (get_init_files): Use relocate_path.
7988 (README): Mention --with-gdb-datadir.
7990 2009-04-23 Joel Brobecker <brobecker@adacore.com>
7992 * ada-tasks (task_command_1): Call target_find_new_threads.
7994 2009-04-23 Joel Brobecker <brobecker@adacore.com>
7996 * stack.c (do_gdb_disassembly): Print the exception message if an
7997 error was thrown while trying to perform the disassembly.
7999 2009-04-22 Jan Kratochvil <jan.kratochvil@redhat.com>
8001 * varobj.c (free_variable): Replace free_current_contents by xfree.
8003 2009-04-22 Kazu Hirata <kazu@codesourcery.com>
8005 * arm-linux-nat.c (fetch_register, store_register): Use
8006 ARM_CPSR_GREGNUM instead of ARM_CPSR_REGNUM.
8007 * arm-linux-tdep.c (arm_linux_supply_gregset,
8008 arm_linux_collect_gregset): Likewise.
8009 * arm-linux-tdep.h (ARM_CPSR_GREGNUM): New.
8010 * arm-tdep.h (ARM_CPSR_REGNUM): Remove.
8012 2009-04-22 Hui Zhu <teawater@gmail.com>
8014 * stack.c (_initialize_stack): Set the default of
8015 disassemble-next-line to off.
8017 2009-04-21 Tom Tromey <tromey@redhat.com>
8019 * acinclude.m4: Use AS_HELP_STRING, not AC_HELP_STRING.
8020 * configure.ac: Use AS_HELP_STRING, not AC_HELP_STRING.
8022 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
8024 * configure.ac: Add quotes to not lose brackets in help text.
8025 * configure: Rebuild.
8027 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
8029 * configure.ac: Don't postprocess Makefile in config.status.
8030 Substitute GDB_NM_FILE. Don't substitute nm_h.
8031 * Makefile.in (GDB_NM_FILE): Substitute.
8032 (TAGS): Use $(GDB_NM_FILE) instead of $(NAT_FILE).
8033 * configure: Regenerate.
8034 * gnulib/Makefile.in: Regenerate.
8036 2009-04-21 Joseph Myers <joseph@codesourcery.com>
8038 * configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
8039 --with-htmldir): New.
8040 * configure: Regenerate.
8042 2009-04-21 Tom Tromey <tromey@redhat.com>
8044 * configure: Rebuild.
8045 * configure.ac: Use lower case for start of help strings. Clean
8046 up --with-sysroot help.
8048 2009-04-21 Tom Tromey <tromey@redhat.com>
8050 * configure: Rebuild.
8051 * acinclude.m4 (AM_ICONV): Use AC_HELP_STRING.
8052 * configure.ac: Use AC_HELP_STRING. Use upper case for variables
8055 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
8057 ARI fix: remove "%p".
8058 * ia64-tdep.c (ia64_frame_this_id): Use host_address_to_string function.
8059 (ia64_sigtramp_frame_this_id): Ditto.
8060 (ia64_libunwind_frame_this_id): Ditto.
8061 (ia64_libunwind_sigtramp_frame_this_id): Ditto.
8062 * symmisc.c (maintenance_info_psymtabs): Ditto.
8064 2009-04-21 Joseph Myers <joseph@codesourcery.com>
8066 * configure.ac (--with-relocated-sources): New.
8067 * configure, config.in: Regenerate.
8068 * source.c (add_substitute_path_rule): Remove static.
8069 * source.h (add_substitute_path_rule): Declare.
8070 * main.c: Include "source.h".
8071 (captured_main): Add substitution rule if RELOC_SRCDIR.
8073 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
8075 * gnu-nat.h (proc_debug): Add missing continuation line in macro.
8077 2009-04-20 David Daney <ddaney@caviumnetworks.com>
8079 * NEWS: Mention MIPS/Linux hardware watchpoint support.
8081 2009-04-20 David Daney <ddaney@caviumnetworks.com>
8083 * mips-linux-nat.c (command.h, gdbcmd.h, gdb_assert.h): New #includes.
8084 (maint_show_dr, super_close): New variables.
8085 (super_fetch_registers, super_store_registers): Make static.
8086 (PTRACE_GET_WATCH_REGS, PTRACE_SET_WATCH_REGS, W_BIT, R_BIT, I_BIT)
8087 (W_MASK, R_MASK, I_MASK, IRW_MASK, MAX_DEBUG_REGISTER): Define.
8088 (pt_watch_style): Define new enum.
8089 (mips32_watch_regs, mips64_watch_regs, pt_watch_regs, mips_watchpoint):
8091 (watch_readback_valid, watch_readback, current_watches, watch_mirror):
8093 (get_irw_mask, get_reg_mask, get_num_valid, get_watchlo)
8094 (set_watchlo, get_watchhi, set_watchhi, mips_show_dr)
8095 (mips_linux_read_watch_registers, mips_linux_can_use_hw_breakpoint)
8096 (mips_linux_stopped_by_watchpoint, mips_linux_stopped_data_address)
8097 (type_to_irw, fill_mask, try_one_watch)
8098 (mips_linux_region_ok_for_hw_watchpoint, write_watchpoint_regs)
8099 (mips_linux_new_thread, populate_regs_from_watches)
8100 (mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
8101 (mips_linux_close): New functions.
8102 (_initialize_mips_linux_nat): Register watchpoint functions with
8103 the target_ops. Add show-debug-regs maintenance command.
8105 2009-04-20 David Daney <ddaney@caviumnetworks.com>
8107 * infrun.c (handle_inferior_event): Move gegisters_changed call down.
8109 2009-04-19 Pedro Alves <pedro@codesourcery.com>
8111 * NEWS: Mention gdbserver support for x86 Windows CE.
8113 2009-04-19 Eli Zaretskii <eliz@gnu.org>
8115 * config/djgpp/fnchange.lst: Fix typos.
8117 Set default host and target charsets in the DJGPP port.
8119 * config/djgpp/config.sed (am_cv_langinfo_codeset)
8120 (bash_cv_langinfo_codeset, ac_cv_header_nl_types_h): Set to "yes"
8121 in all configure scripts that define ac_cv_env_CPP_value.
8123 * go32-nat.c (dos_codepage, nl_langinfo): New functions.
8126 * config/djgpp/nl_types.h: New file.
8128 * config/djgpp/langinfo.h: New file.
8130 * config/i386/go32.mh (MH_CFLAGS): Add $(srcdir)/config/djgpp.
8132 2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
8134 * Makefile.in (MAKEHTML): Set to makeinfo --html.
8135 (MAKEHTMLFLAGS): Set to empty.
8137 2009-04-18 Eli Zaretskii <eliz@gnu.org>
8139 * NEWS: Mention all new set/show commands added since GDB 6.8 was
8142 * go32-nat.c (go32_sysinfo): Check if the call to
8143 __dpmi_get_capabilities fills the buffer with information, and
8144 don't use the buffer if not.
8146 2009-04-17 Tom Tromey <tromey@redhat.com>
8148 * charset.c (_initialize_charset): Add special case for "646".
8150 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
8152 * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
8153 * configure: Regenerate.
8154 * Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
8155 configure substitutions.
8156 (FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.
8158 2009-04-17 Pierre Muller <muller@ics.u-strasbg.fr>
8160 ARI fix: Do not use %p, replace by call to host_address_to_string
8162 * darwin-nat.c (darwin_xfer_partial): Apply change.
8163 * gnu-nat.c (inf_continue, gnu_xfer_memory): Ditto.
8164 * gnu-nat.h (proc_debug): Ditto.
8165 * symmisc.c (maintenance_info_symtabs): Ditto.
8166 (maintenance_info_psymtabs): Ditto.
8167 * windows-nat.c (handle_load_dll): Ditto.
8168 (handle_unload_dll, info_w32_command, handle_exception): Ditto.
8169 * xtensa-tdep.c (xtensa_unwind_pc): Ditto.
8171 2009-04-17 Joseph Myers <joseph@codesourcery.com>
8173 * configure.tgt (i[34567]86-*-linux*): Use 64-bit configuration if
8174 --enable-64-bit-bfd.
8175 (sparc-*-linux*): Likewise.
8177 2009-04-17 Eli Zaretskii <eliz@gnu.org>
8179 * go32-nat.c (go32_sysinfo): Update list of Windows versions of
8182 2009-04-16 Pedro Alves <pedro@codesourcery.com>
8184 * remote.c (remote_query_attached): Fix pasto in packet_ok result
8187 2009-04-16 Joel Brobecker <brobecker@adacore.com>
8189 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
8190 Revert the previous change. Might not be correct, actually.
8192 2009-04-16 Joel Brobecker <brobecker@adacore.com>
8194 * ada-lang.h (ada_adjust_exception_stop, ada_print_exception_stop)
8195 (ada_get_current_task, ada_print_exception_breakpoint_nontask)
8196 (ada_print_exception_breakpoint_task, ada_reset_thread_registers):
8197 Remove declaration. These are non-existent functions.
8199 2009-04-16 Joel Brobecker <brobecker@adacore.com>
8201 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
8202 Fix a compilation warning on mips-irix due to casting from
8203 a pointer of different size.
8205 2009-04-16 Joel Brobecker <brobecker@adacore.com>
8207 * ada-lang.c (symtab_for_sym): Delete.
8208 (user_select_syms): Use sym->symtab instead of calling symtab_for_sym.
8210 2009-04-16 Joel Brobecker <brobecker@adacore.com>
8212 * ada-lang.c (extract_string): Delete.
8213 (ada_main_name): Reimplement using target_read_string instead of
8216 2009-04-16 Andreas Schwab <schwab@linux-m68k.org>
8218 * m68klinux-nat.c: Remove obsolete comment.
8219 (fetch_register, store_register): Don't call
8220 gdbarch_cannot_fetch_register or gdbarch_cannot_store_register,
8221 which are always nops here.
8223 2009-04-14 Tom Tromey <tromey@redhat.com>
8225 * c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING.
8226 (c_printstr): Likewise.
8227 * charset.c: Include gdb_wait.h.
8228 (make_wchar_iterator): Use INTERMEDIATE_ENCODING.
8229 (find_charset_names): Use pexecute. Handle libiconv's output.
8231 (_initialize_charset): Use xstrdup.
8232 * gdb_wchar.h: Check HAVE_BTOWC. Split PHONY_ICONV and wchar
8234 (INTERMEDIATE_ENCODING): New define.
8235 * configure, config.in: Rebuild.
8236 * configure.ac: Check for btowc.
8238 2009-04-15 Tom Tromey <tromey@redhat.com>
8240 * c-lang.c (evaluate_subexp_c): Correctly handle EVAL_SKIP.
8242 2009-04-15 Eli Zaretskii <eliz@gnu.org>
8244 * utils.c (parse_escape): Initialize target_char to pacify GCC.
8246 2009-04-14 Jan Kratochvil <jan.kratochvil@redhat.com>
8248 * c-lang.c (c_get_string): Fix xfree crash on a failed string read.
8250 2009-04-14 Pierre Muller <muller@ics.u-strasbg.fr>
8252 ARI fix: sprintf rule.
8253 * ada-exp.y (convert_char_literal): Replace sprintf by xsnprintf.
8254 * ada-lang.c (add_angle_brackets): Use xstrprintf.
8255 (ada_decode): Replace sprintf by xsnprintf.
8256 (find_old_style_renaming_symbol): Ditto.
8257 (ada_to_fixed_type_1, ada_enum_name): Ditto.
8260 2009-04-14 Joel Brobecker <brobecker@adacore.com>
8262 * target.c (target_mourn_inferior): Call bfd_cache_close_all
8263 after having executed the target mourn_inferior routine.
8265 2009-04-14 Eli Zaretskii <eliz@gnu.org>
8267 * config/djgpp/djconfig.sh (DEPDIR): Define to "_deps", if
8270 2009-04-13 David Daney <ddaney@caviumnetworks.com>
8272 * infrun.c (maybe_software_singlestep): New function.
8273 (resume): Call maybe_software_singlestep.
8274 (handle_inferior_event): Same.
8276 2009-04-13 Tom Tromey <tromey@redhat.com>
8278 * python/python-frame.c (frapy_richcompare): Return
8279 Py_NotImplemented, not an error. Handle Py_NE as well.
8281 2009-04-13 Eli Zaretskii <eliz@gnu.org>
8283 * charset.c (EILSEQ): Define if not defined by system headers.
8285 2009-04-11 Eli Zaretskii <eliz@gnu.org>
8287 * config/djgpp/config.sed: Tweak ac_config_files in intl/configure
8288 to be consistent with renaming config.intl.in into config_intl.in.
8290 * go32-nat.c (go32_attach, go32_detach): Fix prototypes to be
8291 consistent with the change from 2008-11-09.
8293 2009-04-10 Jan Kratochvil <jan.kratochvil@redhat.com>
8295 * gdbtypes.c: Remove excessive parentheses at the return keywords.
8296 * varobj.c (varobj_invalidate): Fix indentation.
8297 * varobj.c (varobj_invalidate): Fix formatting text width.
8299 2009-04-08 Vladimir Prus <vladimir@codesourcery.com>
8301 Implement -exec-jump.
8303 * mi/mi-cmds.h (mi_cmd_exec_jump): Declare.
8304 * mi/mi-main.c (mi_cmd_exec_jump): New.
8305 * mi/mi-cmds.c (mi_cmds): Register exec-jump.
8307 2009-04-07 Doug Evans <dje@google.com>
8309 * symfile.c (symbol_file_clear): Fix indentation.
8311 2009-04-06 Mark Kettenis <kettenis@gnu.org>
8313 * sparc64nbsd-nat.c (sparc64nbsd_supply_pcb): Fix comment.
8315 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
8317 * ppc-linux-nat.c (ppc_linux_target_wordsize): New function.
8318 (ppc_linux_auxv_parse): New function.
8319 (ppc_linux_read_description): Use ppc_linux_target_wordsize.
8320 (_initialize_ppc_linux_nat): Install ppc_linux_auxv_parse.
8322 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
8324 * spu-linux-nat.c (spu_bfd_open): Set filename of in-memory
8325 BFD to contents of SPU name note.
8326 (spu_symbol_file_add_from_memory): Call symbol_file_add_from_bfd
8327 with "from_tty" argument 1 instead of 0.
8329 2009-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
8332 (new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
8333 Create the symbol in local scope.
8334 * symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.
8336 2009-04-02 Keith Seitz <keiths@redhat.com>
8338 * stabsread.c (read_member_functions): GCC may emit an extra space
8339 at the end of the names "__base_ctor" and "__base_dtor"; so ignore
8340 whitespace when looking for these functions.
8342 2009-04-01 Joel Brobecker <brobecker@adacore.com>
8344 Change the default value for "set print frame-arguments" to scalars.
8346 * stack.c (print_frame_arguments): Set initial value to "scalars".
8348 2009-04-01 Aleksandar Ristovski <aristovski@qnx.com>
8350 * mips-tdep.c (mips_numeric_register_alieses): New definition.
8351 (mips_gdbarch_init): Add user registers from
8352 mips_numeric_register_aliases.
8354 2009-04-01 Joel Brobecker <brobecker@adacore.com>
8356 * linux-nat.c (linux_nat_filter_event): Minor comment reformatting.
8358 2009-04-01 Joel Brobecker <brobecker@adacore.com>
8360 * linux-nat.c (linux_nat_filter_events): Do not delete the lwp if
8361 this is the last one.
8363 2009-04-01 Pedro Alves <pedro@codesourcery.com>
8365 * remote.c (append_resumption): New.
8366 (remote_vcont_resume): Use it.
8368 2009-04-01 Joel Brobecker <brobecker@adacore.com>
8370 * windows-nat.c (+windows_get_ada_task_ptid): New function.
8371 (init_windows_ops): Set windows_ops.to_get_ada_task_ptid.
8373 2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
8374 Keith Seitz <keiths@redhat.com>
8375 Jan Kratochvil <jan.kratochvil@redhat.com>
8378 * Makefile.in (dbxread.o): Update.
8379 * dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
8380 * dwarf2read.c (GDB_FORM_cached_string): New.
8381 (read_partial_die): Use dwarf2_canonicalize_name.
8382 (dwarf2_linkage_name): Use dwarf2_name.
8383 (dwarf2_canonicalize_name): New.
8384 (dwarf2_name): Use dwarf2_canonicalize_name.
8385 (dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
8386 * stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
8387 * symtab.c (lookup_symbol_in_language): Canonicalize input before
8389 * cp-name-parser.y: operator() requires two parameters,
8390 according to libiberty.
8391 * minsyms.c (lookup_minimal_symbol): Canonicalize input
8395 2009-03-31 Joel Brobecker <brobecker@adacore.com>
8397 Provide support for (Ada) task-specific breakpoints.
8399 * ada-lang.h (ada_get_task_number): Add declaration.
8400 (breakpoint_ada_task_match): Delete declaration.
8401 * ada-tasks.c (ada_get_task_number): Make non-static.
8402 * breakpoint.h (struct breakpoint): Add field "task".
8403 * breakpoint.c (print_one_breakpoint_location): Add handling of
8404 task-specific breakpoints.
8405 (create_breakpoint, create_breakpoints, find_condition_and_thread):
8406 New parameter "task".
8407 (break_command_really): Update calls to find_condition_and_thread
8408 and create_breakpoints.
8409 (breakpoint_re_set_one): Update call to find_condition_and_thread.
8412 2009-03-31 Joel Brobecker <brobecker@adacore.com>
8414 * ada-tasks.c (short_task_info): Eliminate the "Running" task state.
8416 2009-03-31 Pedro Alves <pedro@codesourcery.com>
8418 * remote.c (remote_notice_new_inferior): Use ptid_is_pid. Check
8419 if the thread's ptid without a thread id field is in the list
8420 before calling thread_change_ptid.
8421 (extended_remote_attach_1): In non-stop mode, do not rely on
8422 querying the current thread, instead, query the thread list, and
8423 select the first thread of the process.
8424 * gdbthread.h (first_thread_of_process): Declare.
8425 * thread.c (first_thread_of_process): Define.
8427 2009-03-30 Stan Shebs <stan@codesourcery.com>
8429 Make tracepoints into a type of breakpoint.
8430 * breakpoint.h (enum bptype): Add bp_tracepoint.
8431 (struct breakpoint): Add fields step_count, pass_count, actions.
8432 (get_tracepoint, get_tracepoint_by_number): Declare.
8433 (all_tracepoints): Declare.
8434 * breakpoint.c: Include tracepoint.h, readline.h.
8435 (ALL_TRACEPOINTS): Move here from tracepoint.c.
8436 (tracepoint_count): Ditto.
8437 (should_be_inserted): GDB does not insert tracepoints itself.
8438 (print_it_typical): Add tracepoint case.
8439 (bpstat_what): Ditto.
8440 (print_one_breakpoint_location): Ditto, and add printing for
8441 pass count, step count, and action list.
8442 (user_settable_breakpoint): Add tracepoint case.
8443 (allocate_bp_location): Ditto.
8444 (set_breakpoint_location_function): Ditto.
8445 (disable_breakpoints_in_shlibs): Ditto.
8447 (break_command_really): Add argument traceflag, use to choose
8448 basic breakpoint type.
8449 (break_command_1): Pass extra argument.
8450 (set_breakpoint, handle_gnu_v3_exceptions): Ditto.
8451 (breakpoint_re_set_one): Add tracepoint case.
8452 (disable_command, enable_command): Ditto.
8453 (set_tracepoint_count): Move here from tracepoint.c.
8454 (trace_command): Move here from tracepoint.c and use
8455 break_command_really.
8456 (tracepoints_info): Move here from tracepoint.c and call
8458 (enable_trace_command): Move here from tracepoint.c and call
8460 (disable_trace_command): Move here from tracepoint.c and call
8462 (delete_trace_command): Move here from tracepoint.c and call
8464 (trace_pass_command): Move here from tracepoint.c.
8465 (get_tracepoint_by_number): Ditto.
8466 (tracepoint_save_command): Ditto.
8467 (get_tracepoint): New function.
8468 (all_tracepoints): New function.
8469 (_initialize_breakpoint): Move tracepoint init from tracepoint.c,
8470 deprecate "enable trace" and "disable trace" commands.
8471 * tracepoint.h (struct tracepoint): Remove.
8472 (tracepoint_chain): Remove decl.
8473 (deprecated_create_tracepoint_hook): Remove decl.
8474 (deprecated_delete_tracepoint_hook): Remove decl.
8475 (deprecated_modify_tracepoint_hook): Remove decl.
8476 (ALL_TRACEPOINTS, ALL_TRACEPOINTS_SAFE): Remove.
8477 (free_actions): Update signature.
8478 (validate_actionline): Update signature.
8479 (end_actions_pseudocommand): Declare.
8480 (while_stepping_pseudocommand): Declare.
8481 * tracepoint.c: Include breakpoint.h.
8482 (tracepoint_chain, tracepoint_count): Remove.
8483 (free_actions, make_cleanup_free_actions): Update signature.
8484 (trace_command, set_raw_tracepoint): Remove.
8485 (trace_mention): Remove.
8486 (tracepoints_info): Remove.
8487 (tracepoint_operation, map_args_over_tracepoints): Remove.
8488 (get_tracepoint_by_number): Remove.
8489 (enable_trace_command, disable_trace_command): Remove.
8490 (delete_trace_command, trace_pass_command): Remove.
8491 (trace_actions_command, read_actions): Update signature.
8492 (validate_actionline): Update signature, use bp loc.
8493 (encode_actions): Ditto.
8494 (download_tracepoint): New function, body of trace_start_command.
8495 (trace_start_command): Call it, use all_tracepoints.
8496 (tracepoint_save_command): Remove.
8497 (tracepoint_dump_command): Use get_tracepoint.
8498 (end_actions_pseudocommand): Make globally visible.
8499 (while_stepping_pseudocommand): Ditto.
8500 (_initialize_tracepoint): Move command definitions to breakpoint.c.
8502 2009-03-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
8504 Expose frames to Python.
8505 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-frame.o.
8506 (SUBDIR_PYTHON_SRCS): Add python-frame.c.
8507 (python-frame.o): New target.
8508 * python/python-frame.c: New file.
8509 * python/python-internal.h (gdbpy_frames, gdbpy_newest_frame,
8510 gdbpy_frame_stop_reason_string, gdbpy_selected_frame,
8511 gdbpy_initialize_frames): New prototypes.
8512 * python/python.c (_initialize_python): Call gdbpy_initialize_frames.
8513 (GdbMethods): Add `selected_frame' and `frame_stop_reason_string'
8515 * stack.c (find_frame_funname): New function, factored out of
8517 (print_frame): Call find_frame_funname.
8518 * stack.h (find_frame_funname): Add prototype.
8520 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
8522 Remove unused value_object attribute `owned_by_gdb'.
8523 * python/python-value.c (value_object): Remove owned_by_gdb
8525 (valpy_dealloc): Remove reference to self->owned_by_gdb.
8526 (valpy_new): Likewise.
8527 (value_to_value_object): Likewise.
8529 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
8531 Change gdb.Value.address from a method to an attribute.
8532 * python/python-value.c (value_object): Add `address' element.
8533 (valpy_dealloc): Decrement reference to self->address if set.
8534 (valpy_new): Initialize val_obj->address.
8535 (valpy_address): Rename to ...
8536 (valpy_get_address): ... this. Change signature from method to
8537 attribute. Update self->address if not set.
8538 (value_to_value_object): Initialize val_obj->address.
8539 (value_object_getset): Add `address' element.
8540 (value_object_methods): Remove `address' element.
8542 2009-03-29 Andreas Schwab <schwab@linux-m68k.org>
8544 * observer.sh: Set LANG/LC_ALL to C, not c.
8546 2009-03-28 Kevin Buettner <kevinb@redhat.com>
8548 * mn10300-tdep.c (mn10300_gdbarch_init): For mn10300, by default,
8551 2009-03-28 Pedro Alves <pedro@codesourcery.com>
8553 * remote.c (remote_stop_ns): If multi-process extensions are off,
8554 and GDB is requesting the whole process to stop, sent "vCont;t",
8557 2009-03-28 Pedro Alves <pedro@codesourcery.com>
8559 * inf-loop.c (inferior_event_handler): Avoid calling is_running on
8562 2009-03-27 Eli Zaretskii <eliz@gnu.org>
8564 * config/djgpp/fnchange.lst: Update to fix ARI-reported problems.
8566 2009-03-26 Doug Evans <dje@google.com>
8568 * thread.c (do_restore_current_thread_cleanup): Redo test for
8569 whether to restore old->inferior_ptid.
8571 2009-03-26 Tom Tromey <tromey@redhat.com>
8573 * breakpoint.c (resolve_sal_pc): Preserve original line number
8574 when skipping prologue.
8576 2009-03-26 Doug Evans <dje@google.com>
8578 * thread.c (inferior_thread) Remove "extern" in definition.
8580 2009-03-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
8582 Add gdb.Value.is_optimized_out attribute.
8583 * python/python-value.c (valpy_get_is_optimized_out): New
8585 (value_object_getset): New variable.
8586 (value_object_type): Initialize tp_getset element.
8588 2009-03-26 Joel Brobecker <brobecker@adacore.com>
8590 Recognize missing DW_AT_location as <value optimized out>.
8592 (new_symbol <DW_TAG_variable> <!DW_AT_location> <!DW_AT_external>):
8593 Call add_symbol_to_list.
8595 2009-03-25 Tom Tromey <tromey@redhat.com>
8597 * gdbtypes.h (CHECK_TYPEDEF): Don't yield a value.
8598 * stack.c (print_this_frame_argument_p): Use check_typedef.
8600 2009-03-25 Tom Tromey <tromey@redhat.com>
8602 * configure: Rebuild.
8603 * acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
8604 Rearrange flags setting. Add comments.
8606 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
8608 * config/i386/nm-i386.h: Remove code within
8609 I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
8610 * config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
8612 * config/i386/nm-cygwin64.h: Ditto.
8613 * config/i386/nm-fbsd.h: Ditto.
8614 * config/i386/nm-go32.h: Ditto.
8615 * config/i386/nm-linux.h: Ditto.
8616 * config/i386/nm-linux64.h: Ditto.
8618 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
8620 ARI fix: "xasprintf" rule.
8621 * printcmd.c (sym_info): Replace xasprintf by xstrprintf.
8623 2009-03-25 Pedro Alves <pedro@codesourcery.com>
8625 * remote.c (remote_start_remote): In non-stop mode, call
8626 init_wait_for_inferior before adding threads and inferiors.
8628 2009-03-25 Joel Brobecker <brobecker@adacore.com>
8630 * breakpoint.c (breakpoint_thread_match): Split a large condition
8631 into several smaller conditions. No behavior change.
8633 2009-03-25 Pedro Alves <pedro@codesourcery.com>
8635 * infrun.c (infrun_thread_thread_exit): New.
8636 (_initialize_infrun): Attach it to the thread_exit observer.
8637 * thread.c (delete_thread_1): Always call the observer, passing it
8639 * mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
8640 SILENT, return immediately.
8642 2009-03-25 Pedro Alves <pedro@codesourcery.com>
8644 * infrun.c (normal_stop): Use has_stack_frames instead of
8646 * mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
8647 when there is no thread selected.
8648 (mi_cmd_execute): Don't special case commands that can run without
8649 a valid selected thread.
8650 * top.c (execute_command): Don't special case commands that can
8651 run without a valid selected thread. Use has_stack_frames.
8652 * infcmd.c (ensure_valid_thread): New.
8653 (continue_1, step_1, jump_command, signal_command): Use it.
8654 (detach_command): Error out if there's no selected thread/inferior.
8655 * thread.c (print_thread_info): Allow having no thread selected.
8656 (switch_to_thread): Don't read the PC if there is no current thread.
8657 (do_restore_current_thread_cleanup): Don't record the current
8658 frame if there is no current thread.
8659 (make_cleanup_restore_current_thread): Don't read frame info if
8660 there is no selected thread.
8661 (_initialize_thread): Don't mark commands as
8662 "no_selected_thread_ok".
8663 * frame.c (get_current_frame): Error out if there is no valid
8665 (has_stack_frames): Return false if there is no valid
8667 * cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
8668 "no_selected_thread_ok".
8669 * cli/cli-decode.c (set_cmd_no_selected_thread_ok)
8670 (get_cmd_no_selected_thread_ok): Delete.
8671 * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
8672 (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
8674 * stack.c (get_selected_block): Use has_stack_frames.
8676 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
8678 Fix size of FPSCR in Power 7 processors.
8679 * ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
8680 (PPC_FEATURE_HAS_DFP): New #define.
8681 (ppc_linux_read_description): Check for DFP feature instead of
8682 ISA 2.05 to decide on size of the FPSCR.
8684 2009-03-25 Kevin Buettner <kevinb@redhat.com>
8686 * mn10300-tdep.c (trad-frame.h): Don't include.
8687 (prologue-value.h): Include.
8688 (mn10300_frame_unwind_cache, set_reg_offsets): Delete.
8689 (struct mn10300_prologue): Define.
8690 (push_reg, translate_rreg, check_for_saved): New functions.
8691 (mn10300_analyze_prologue): Rewrite, using prologue-value
8692 machinery. Handle more instructions than before. Permit
8693 instructions to occur in any order.
8694 (mn10300_skip_prologue): Find the extents of the function
8695 in question; mn10300_analyze_prologue no longer does this.
8696 (mn10300_analyze_frame_prologue): New function.
8697 (mn10300_frame_base): New function.
8698 (mn10300_frame_this_id): Rewrite, no longer using trad-frame
8700 (mn10300_frame_prev_register): Likewise.
8701 (mn10300_frame_base_address, mn10300_frame_base struct): Delete.
8702 (mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
8704 (mn10300_frame_unwind_init): Don't call frame_base_set_default().
8706 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
8708 Fix completer problem for filename completion on the first try.
8710 * gdb/completer.h (gdb_completion_word_break_characters): New function.
8711 * gdb/completer.c: Include gdb_assert.h.
8712 (complete_line_internal_reason): New enum.
8713 (complete_line_internal): Change last argument type to
8714 complete_line_internal_reason.
8715 Modify function to handle the different complete_line_internal_reason
8717 (complete_line): Adapt to change in complete_line_internal.
8718 (command_completer): Ditto.
8719 (gdb_completion_word_break_characters): Implement new function.
8720 * top.c (init_main): Set rl_completion_word_break_hook to
8721 gdb_completion_word_break_characters.
8724 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
8726 ARI fix: "strlen d_name" rule.
8727 * linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
8730 2009-03-24 Tom Tromey <tromey@redhat.com>
8731 Pedro Alves <pedro@codesourcery.com>
8733 * configure, config.in: Rebuild.
8734 * configure.ac: Check for libiconvlist.
8735 * charset.c: Check HAVE_LIBICONVLIST.
8736 * acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
8737 LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
8738 * Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
8740 (INTERNAL_CFLAGS_BASE): Update.
8741 (INTERNAL_LDFLAGS): Update.
8744 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
8746 * configure.ac: Initialize the variable $PREFER_CURSES.
8747 * configure: Regenerated.
8749 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
8751 * configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
8752 * configure: Regenerated.
8754 2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
8756 ARI fix: "strerror" rule.
8757 * darwin-nat.c (darwin_ptrace): Use safe_strerror.
8758 (darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
8760 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8762 * ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
8763 before looking up the fields inside our struct type.
8765 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8767 * ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
8768 trying to resolve the type qualification.
8770 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8772 * ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
8773 we try to apply the attribute on the real type, rather than
8774 its associated typedef.
8776 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8778 * ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
8779 to make sure we try to get the modulus of the actual type, not the
8782 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8784 * ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
8785 [OP_ATR_LENGTH]: When using the attribute on a type, make sure
8786 to get the real type, not the associated typedef.
8788 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8790 * ada-lang.c (ada_get_field_index): Add handling of the case
8791 when TYPE is a typedef of a struct.
8793 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8795 Add gdb_usleep as a portable version of usleep based on gdb_select.
8796 * gdb_usleep.h, gdb_usleep.c: New files.
8797 * Makefile.in (SFILES): Add gdb_usleep.c.
8798 (HFILES_NO_SRCDIR): Add gdb_usleep.h.
8799 (COMMON_OBS): Add gdb_usleep.o.
8800 * ser-unix.c (hardwire_send_break): Replace call to gdb_select
8801 by call to gdb_usleep.
8803 2009-03-23 Joel Brobecker <brobecker@adacore.com>
8805 * buildsym.c (end_symtab): If we ignore the subfiles, then
8806 unlink the associated symtabs if they were already allocated.
8808 2009-03-23 Jerome Guitton <guitton@adacore.com>
8810 Provide a way to force building of GDB with libcurses.
8811 * configure.ac: Add --with-curses.
8812 * configure: Regenerated.
8814 2009-03-23 Tom Tromey <tromey@redhat.com>
8816 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
8819 2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
8821 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
8822 solib_contains_address_p instead of searching.
8824 2009-03-23 Tom Tromey <tromey@redhat.com>
8826 * charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
8827 (iconv): Make 'inbuf' argument const.
8828 (convert_between_encodings): Use ICONV_CONST.
8829 (wchar_iterate): Likewise.
8831 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
8833 * windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
8834 dynamically loaded function.
8835 (LookupPrivilegeValueA): Ditto.
8836 (OpenProcessToken): Ditto.
8837 (AdjustTokenPrivileges): Rename and define placeholder for address of
8838 dynamically loaded function.
8839 (LookupPrivilegeValueA): Ditto.
8840 (OpenProcessToken): Ditto.
8841 (set_process_privilege): Remove check for loaded functions.
8842 (bad_OpenProcessToken): Define.
8843 (_initialize_loadable): Load token functions from advapi here, setting
8844 OpenProcessToken function to a dummy static function which always return
8845 error if OS doesn't support this functionality.
8847 2009-03-22 Nicolas Roche <roche@adacore.com>
8848 Christopher Faylor <me+cygwin@cgf.cx>
8850 * win32-nat.c (ctrl_c_handler): New function.
8851 (win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
8852 is run in a separate console.
8854 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
8856 * windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
8857 for dynamically loaded function.
8858 (DebugBreakProcess): Ditto.
8859 (DebugSetProcessKillOnExit): Ditto.
8860 (EnumProcessModules): Ditto.
8861 (GetModuleFileNameExA): Ditto.
8862 (GetModuleInformation): Ditto.
8863 (DebugActiveProcessStop): Rename and define placeholder for address of
8864 dynamically loaded function.
8865 (DebugBreakProcess): Ditto.
8866 (DebugSetProcessKillOnExit): Ditto.
8867 (EnumProcessModules): Ditto.
8868 (GetModuleFileNameExA): Ditto.
8869 (GetModuleInformation): Ditto.
8870 (psapi_loaded): Delete.
8871 (get_module_name): Don't check psapi_loaded, just rely on the fact that
8872 dynamically loaded functions will return failure if they weren't
8874 (has_detach_ability): Delete.
8875 (windows_attach): Remove call to has_detach_ability (). Just rely on
8876 functions being callable.
8877 (bad_DebugActiveProcessStop): Define.
8878 (bad_DebugBreakProcess): Ditto.
8879 (bad_DebugSetProcessKillOnExit): Ditto.
8880 (bad_EnumProcessModules): Ditto.
8881 (bad_GetModuleFileNameExA): Ditto.
8882 (bad_GetModuleInformation): Ditto.
8883 (_initialize_loadable): Rename from _initialize_psapi. Initialize all
8884 dynamic storage here, setting nonexistent functions to dummy static
8885 functions which always return error.
8887 2009-03-22 Pedro Alves <pedro@codesourcery.com>
8889 * mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
8890 to the about_to_proceed observer notification.
8891 (mi_about_to_proceed): New.
8892 (mi_on_resume): Only output ^running and the prompt here if the
8893 target was proceeded.
8894 * breakpoint.c (breakpoint_proceeded): New static.
8895 (breakpoint_about_to_proceed): New.
8896 (_initialize_breakpoints): Attach breakpoint_about_to_proceed to
8897 the about_to_proceed observer notification.
8898 * inferior.h (breakpoint_proceeded): Delete declaration.
8899 * infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
8900 Notify the about_to_proceed observers.
8901 (struct inferior_status): Delete breakpoint_proceeded member.
8902 (save_inferior_status): Don't save it.
8903 (restore_inferior_status): Don't restore it.
8904 * mi-main.h (mi_proceeded): Declare.
8905 * mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
8908 2009-03-22 Pedro Alves <pedro@codesourcery.com>
8910 * gdbthread.h (struct thread_info): Add in_infcall member.
8911 * infcall.c (run_inferior_call): Save, set and restore in_infcall.
8912 Remove reverences to suppress_resume_observer. Refresh
8913 `call_thread' after returning from `proceed'.
8914 * infcmd.c (suppress_resume_observer): Delete.
8915 * inferior.h (suppress_resume_observer): Delete declaration.
8916 * mi/mi-interp.c (mi_on_resume): Suppress output while calling an
8918 * thread.c (set_running): Remove references to
8919 suppress_resume_observer.
8920 * infrun.c (struct inferior_status): Add in_infcall member.
8921 (save_inferior_status): Save it.
8922 (restore_inferior_status): Restore it.
8924 2009-03-22 Pedro Alves <pedro@codesourcery.com>
8926 * infcall.c (run_inferior_call): Remove references to
8927 suppress_stop_observer.
8928 * infcmd.c (suppress_stop_observer): Delete.
8929 (finish_command_continuation): Remove NOTE. Don't clear
8930 suppress_stop_observer anymore.
8931 (finish_command_continuation_free_arg): Likewise.
8932 (finish_forward): Remove references to suppress_stop_observer.
8933 Call normal_stop observer if we haven't already.
8934 * inferior.h (suppress_stop_observer): Delete.
8935 * infrun.c (normal_stop): When deciding to suppress the
8936 normal_stop observer, check for proceed_to_finish instead of
8937 suppress_stop_observer.
8939 2009-03-22 Pedro Alves <pedro@codesourcery.com>
8941 * symfile.c (symfile_relocate_debug_section): Remove check for
8944 2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
8945 Jim Blandy <jimb@red-bean.com>
8946 Thiago Jung Bauermann <bauerman@br.ibm.com>
8947 Tom Tromey <tromey@redhat.com>
8949 Miscellaneous fixes to the Python code.
8950 * python/python-cmd.c (cmdpy_init): Accept keyword
8952 * python/python-value.c (valpy_string): Accept keyword
8954 (valpy_binop): Use `break' to exit from the TRY_CATCH block.
8955 Do not call value_to_value_object on NULL RES_VAL.
8956 (value_object_methods): Change `string' entry to also accept
8958 (convert_value_from_python): Return a copy of the value if obj is
8960 (value_object_methods): Mark the `string' method as accepting
8961 keywords, and show method "prototype" in the doc string.
8962 * python/python.c (get_parameter): Don't return inside a
8965 2009-03-20 Tom Tromey <tromey@redhat.com>
8967 Add support for convenience functions in Python.
8968 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
8969 (SUBDIR_PYTHON_SRCS): Add python-function.c.
8970 (python-function.o): New target.
8971 * eval.c: Include "python/python.h" and <ctype.h>.
8972 (evaluate_subexp_standard): Handle values of type
8973 TYPE_CODE_INTERNAL_FUNCTION.
8974 * gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
8975 * parse.c (write_exp_string): Remove duplicate word in comment.
8976 * python/python-function.c: New file.
8977 * python/python-internal.h (gdbpy_initialize_functions): Add
8979 * python/python.c (_initialize_python): Call
8980 gdbpy_initialize_functions.
8981 * valprint.c (value_check_printable): Handle values of type
8982 TYPE_CODE_INTERNAL_FUNCTION.
8983 * value.c: Include "cli/cli-decode.h".
8984 (internal_function): New struct.
8985 (functionlist, internal_fn_type): New static variables.
8986 (lookup_only_internalvar,
8987 lookup_internalvar): Add const qualifier to name argument.
8988 (create_internalvar): Likewise. Initialize new field.
8989 (set_internal_var): Fix typo in comment. Don't allow assignment
8990 to canonical variable.
8991 (value_create_internal_function, value_internal_function_name,
8992 call_internal_function, function_command, function_destroyer,
8993 add_internal_function): New functions.
8994 (_initialize_values): Create `function' placeholder command.
8995 Initialize internal_fn_type.
8996 * value.h (lookup_only_internalvar, create_internalvar,
8997 lookup_internalvar): Add const qualifier to name argument.
8998 (internal_function_fn, add_internal_function, call_internal_function,
8999 value_internal_function_name): Add prototypes.
9000 (struct internalvar) <canonical>: New field.
9002 2009-03-20 Tom Tromey <tromey@redhat.com>
9004 * c-lang.c (evaluate_subexp_c): Call check_typedef.
9006 2009-03-20 Tom Tromey <tromey@redhat.com>
9007 Julian Brown <julian@codesourcery.com>
9009 PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
9010 PR i18n/9401, PR exp/9613:
9012 * value.h (value_typed_string): Declare.
9013 (val_print_string): Update.
9014 * valprint.h (print_char_chars): Update.
9015 * valprint.c (print_char_chars): Add type argument. Update.
9016 (val_print_string): Likewise.
9017 * valops.c (value_typed_string): New function.
9018 * utils.c (host_char_to_target): New function.
9019 (parse_escape): Use host_char_to_target, host_hex_value. Update.
9021 (no_control_char_error): Remove.
9022 * typeprint.c (print_type_scalar): Update.
9023 * scm-valprint.c (scm_scmval_print): Update.
9024 * scm-lang.h (scm_printchar, scm_printstr): Update.
9025 * scm-lang.c (scm_printchar): Add type argument.
9026 (scm_printstr): Likewise.
9027 * printcmd.c (print_formatted): Update.
9028 (print_scalar_formatted): Update.
9029 (printf_command) <wide_string_arg, wide_char_arg>: New constants.
9030 Handle '%lc' and '%ls'.
9031 * parser-defs.h (struct typed_stoken): New type.
9032 (struct stoken_vector): Likewise.
9033 (write_exp_string_vector): Declare.
9034 * parse.c (write_exp_string_vector): New function.
9035 * p-valprint.c (pascal_val_print): Update.
9036 * p-lang.h (is_pascal_string_type, pascal_printchar,
9037 pascal_printstr): Update.
9038 * p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
9039 Add 'char_type' argument.
9040 (pascal_emit_char): Add type argument.
9041 (pascal_printchar): Likewise.
9042 (pascal_printstr): Likewise.
9043 * objc-lang.c (objc_emit_char): Add type argument.
9044 (objc_printchar): Likewise.
9045 (objc_printstr): Likewise.
9046 * macroexp.c (get_character_constant): Handle unicode characters.
9048 (get_string_literal): Handle unicode strings. Use
9050 * m2-valprint.c (print_unpacked_pointer): Update.
9051 (m2_print_array_contents): Update.
9052 (m2_val_print): Update.
9053 * m2-lang.c (m2_emit_char): Add type argument.
9054 (m2_printchar): Likewise.
9055 (m2_printstr): Likewise.
9056 * language.h (struct language_defn) <la_printchar>: Add type
9058 <la_printstr, la_emitchar>: Likewise.
9059 (LA_PRINT_CHAR): Likewise.
9060 (LA_PRINT_STRING): Likewise.
9061 (LA_EMIT_CHAR): Likewise.
9062 * language.c (unk_lang_emit_char): Add type argument.
9063 (unk_lang_printchar): Likewise.
9064 (unk_lang_printstr): Likewise.
9065 * jv-valprint.c (java_val_print): Update.
9066 * jv-lang.c (java_emit_char): Add type argument.
9067 * f-valprint.c (f_val_print): Update.
9068 * f-lang.c (f_emit_char): Add type argument.
9069 (f_printchar): Likewise.
9070 (f_printstr): Likewise.
9071 * expprint.c (print_subexp_standard): Update.
9072 * charset.h (target_wide_charset): Declare.
9073 (c_target_char_has_backslash_escape, c_parse_backslash,
9074 host_char_print_literally, host_char_to_target,
9075 target_char_to_host, target_char_to_control_char): Remove.
9076 (enum transliterations): New type.
9077 (convert_between_encodings): Declare.
9078 (HOST_ESCAPE_CHAR): New define.
9079 (host_letter_to_control_character, host_hex_value): Declare.
9080 (enum wchar_iterate_result): New enum.
9081 (struct wchar_iterator): Declare.
9082 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
9083 wchar_push_back): Declare.
9084 * charset-list.h: New file.
9085 * c-valprint.c (textual_name): New function.
9086 (textual_element_type): Handle wide character types.
9087 (c_val_print): Pass original type to textual_element_type. Handle
9088 wide character types.
9089 (c_value_print): Use textual_element_type. Pass original type of
9091 * c-lang.h (enum c_string_type): New type.
9092 (c_printchar, c_printstr): Update.
9093 * c-lang.c (classify_type): New function.
9094 (print_wchar): Likewise.
9095 (c_emit_char): Add type argument. Handle wide characters.
9096 (c_printchar): Likewise.
9097 (c_printstr): Add type argument. Handle wide and multibyte
9099 (convert_ucn): New function.
9100 (emit_numeric_character): Likewise.
9101 (convert_octal): Likewise.
9102 (convert_hex): Likewise.
9103 (ADVANCE): New macro.
9104 (convert_escape): New function.
9105 (parse_one_string): Likewise.
9106 (evaluate_subexp_c): Likewise.
9107 (exp_descriptor_c): New global.
9108 (c_language_defn): Use exp_descriptor_c.
9109 (cplus_language_defn): Likewise.
9110 (asm_language_defn): Likewise.
9111 (minimal_language_defn): Likewise.
9112 (charset_for_string_type): New function.
9113 * c-exp.y (%union): Add 'svec' and 'tsval'.
9115 (exp): Add CHAR production.
9116 (string_exp): Rewrite.
9117 (exp) <string_exp>: Rewrite.
9118 (tempbuf): Now global.
9119 (tempbuf_init): New global.
9120 (parse_string_or_char): New function.
9121 (yylex) <tempbuf>: Now global.
9122 <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
9124 Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
9125 (c_parse_escape): New function.
9126 * auxv.c (fprint_target_auxv): Update.
9127 * ada-valprint.c (ada_emit_char): Add type argument.
9128 (ada_printchar): Likewise.
9129 (ada_print_scalar): Update.
9130 (printstr): Add type argument. Update calls to ada_emit_char.
9131 (ada_printstr): Add type argument.
9132 (ada_val_print_array): Update.
9133 (ada_val_print_1): Likewise.
9134 * ada-lang.c (emit_char): Add type argument.
9135 * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
9137 * gdb_locale.h: Include langinfo.h.
9138 * charset.c (_initialize_charset): Set default host charset from
9139 the locale. Don't register charsets. Add target-wide-charset
9140 commands. Call find_charset_names.
9141 (struct charset, struct translation): Remove.
9142 (GDB_DEFAULT_HOST_CHARSET): Remove.
9143 (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
9144 (target_wide_charset_name): New global.
9145 (show_host_charset_name): Handle "auto".
9146 (show_target_wide_charset_name): New function.
9147 (host_charset_enum, target_charset_enum): Remove.
9148 (charset_enum): New global.
9149 (all_charsets, register_charset, lookup_charset, all_translations,
9150 register_translation, lookup_translation): Remove.
9151 (simple_charset, ascii_print_literally, ascii_to_control): Remove.
9152 (iso_8859_print_literally, iso_8859_to_control,
9153 iso_8859_family_charset): Remove.
9154 (ebcdic_print_literally, ebcdic_to_control,
9155 ebcdic_family_charset): Remove.
9156 (struct cached_iconv, check_iconv_cache, cached_iconv_convert,
9157 register_iconv_charsets): Remove.
9158 (target_wide_charset_be_name, target_wide_charset_le_name): New
9160 (identity_either_char_to_other): Remove.
9161 (set_be_le_names, validate): New functions.
9162 (backslashable, backslashed, represented): Remove.
9163 (default_c_target_char_has_backslash_escape): Remove.
9164 (default_c_parse_backslash, iconv_convert): Remove.
9165 (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
9166 ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
9167 iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
9168 ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
9169 ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
9170 ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
9171 (table_convert_char, table_translation, simple_table_translation):
9173 (current_host_charset, current_target_charset,
9174 c_target_char_has_backslash_escape_func,
9175 c_target_char_has_backslash_escape_baton): Remove.
9176 (c_parse_backslash_func, c_parse_backslash_baton): Remove.
9177 (host_char_to_target_func, host_char_to_target_baton): Remove.
9178 (target_char_to_host_func, target_char_to_host_baton): Remove.
9179 (cached_iconv_host_to_target, cached_iconv_target_to_host):
9181 (lookup_charset_or_error, check_valid_host_charset): Remove.
9182 (set_host_and_target_charsets): Remove.
9183 (set_host_charset, set_target_charset): Remove.
9184 (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
9185 (set_target_wide_charset_sfunc): New function.
9186 (show_charset): Print target wide character set.
9187 (host_charset, target_charset): Rewrite.
9188 (target_wide_charset): New function.
9189 (c_target_char_has_backslash_escape): Remove.
9190 (c_parse_backslash): Remove.
9191 (host_letter_to_control_character): New function.
9192 (host_char_print_literally): Remove.
9193 (host_hex_value): New function.
9194 (target_char_to_control_char): Remove.
9195 (cleanup_iconv): New function.
9196 (convert_between_encodings): New function.
9197 (target_char_to_host): Remove.
9198 (struct wchar_iterator): Define.
9199 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
9200 wchar_push_back): New functions.
9201 (do_cleanup_iterator): New function.
9202 (char_ptr): New typedef.
9203 (charsets): New global.
9204 (add_one, find_charset_names): New functions.
9205 (default_charset_names): New global.
9206 (auto_host_charset_name): Likewise.
9207 * aclocal.m4, config.in, configure: Rebuild.
9208 * configure.ac: Call AM_LANGINFO_CODESET.
9209 (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
9210 (AM_ICONV): Invoke earlier.
9211 * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
9212 LIBICONV_LIBDIR. Check for libiconv in build tree.
9213 * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
9214 (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
9215 (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
9216 * gdb_obstack.h (obstack_grow_wstr): New define.
9217 * gdb_wchar.h: New file.
9218 * defs.h: Include it.
9220 2009-03-20 Tom Tromey <tromey@redhat.com>
9221 Jan Kratochvil <jan.kratochvil@redhat.com>
9223 * dwarf2read.c (process_die): Handle DW_TAG_typedef.
9224 * eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
9226 * ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
9228 * ada-typeprint.c (print_array_type): Do the NULL check
9231 2009-03-19 Tom Tromey <tromey@redhat.com>
9233 * utils.c (do_obstack_free): New function.
9234 (make_cleanup_obstack_free): Likewise.
9235 * defs.h (make_cleanup_obstack_free): Declare.
9237 2009-03-18 Doug Evans <dje@google.com>
9239 * linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
9240 int, not a long long.
9241 (linux_nat_info_proc_cmd): Store pid in long instead of long long.
9243 * expprint.c (dump_raw_expression): Print note if non-NULL.
9245 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
9248 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
9250 * Makefile.in: Update license to GPLv3.
9251 * ada-exp.y: Update license to GPLv3.
9252 * ada-lex.l: Update license to GPLv3.
9253 * c-exp.y: Update license to GPLv3.
9254 * cp-name-parser.y: Update license to GPLv3.
9255 * darwin-nat-info.c: Update license to GPLv3.
9256 * f-exp.y: Update license to GPLv3.
9257 * gdb_thread_db.h: Update license to GPLv3.
9258 * hppanbsd-nat.c: Update license to GPLv3.
9259 * hppanbsd-tdep.c: Update license to GPLv3.
9260 * hppaobsd-tdep.c: Update license to GPLv3.
9261 * jv-exp.y: Update license to GPLv3.
9262 * m2-exp.y: Update license to GPLv3.
9263 * objc-exp.y: Update license to GPLv3.
9264 * p-exp.y: Update license to GPLv3.
9265 * reply_mig_hack.awk: Update license to GPLv3.
9266 * reverse.c: Update license to GPLv3.
9267 * xtensa-xtregs.c: Update license to GPLv3.
9269 2009-03-18 Pedro Alves <pedro@codesourcery.com>
9271 * remote.c (remote_close): Don't call generic_mourn_inferior.
9272 (remote_mourn_1): Call generic_mourn_inferior after closing the
9275 2009-03-18 Pedro Alves <pedro@codesourcery.com>
9277 * remote.c (remote_start_remote): Add missing call to
9278 init_wait_for_inferior in non-stop mode.
9280 2009-03-18 Pedro Alves <pedro@codesourcery.com>
9282 * breakpoint.c (bpstat_should_step): Only consider software
9283 watchpoints that have a location.
9285 2009-03-17 Joel Brobecker <brobecker@adacore.com>
9287 Add a target_ops parameter to the to_kill method in struct target_ops.
9289 * target.h (struct target_ops): Add a "target_ops *" parameter to
9291 (target_kill): Remove macro. Add declaration.
9292 * target.c (debug_to_kill): Delete, no longer necessary.
9293 (target_kill): New function.
9294 (update_current_target): Stop inheriting the to_kill method.
9295 Do not de_fault it to no_process either.
9296 (setup_target_debug): Do not set current_target.to_kill.
9297 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
9298 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
9299 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
9302 2009-03-17 Doug Evans <dje@google.com>
9304 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
9305 glibc 2.3.2 and earlier.
9307 2009-03-17 Joel Brobecker <brobecker@adacore.com>
9309 * frame.c (get_prev_frame_1): Do not perform the inner_frame
9310 sanity check if this_frame is not NORMAL.
9311 (frame_id_inner): Update the description of this function.
9313 2009-03-17 Hui Zhu <teawater@gmail.com>
9315 * stack.c: Change the introduce of "disassemble-next-line".
9317 2009-03-17 Pedro Alves <pedro@codesourcery.com>
9319 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
9322 2009-03-17 Hui Zhu <teawater@gmail.com>
9324 * stack.c: Include valprint.h.
9325 (disassemble_next_line): New enum.
9326 (show_disassemble_next_line): New function. Show the current
9327 value of disassemble-next-line.
9328 (gdb_disassembly_stub_args): New struct for argument passing
9329 between function do_gdb_disassembly and function
9330 gdb_disassembly_stub.
9331 (gdb_disassembly_stub): New function. Helper for
9333 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
9334 the exception from the gdb_disassembly because it will be
9335 broken by filter sometime.
9336 (print_frame_info): If disassemble-next-line is set to auto
9337 or on and doesn't have the line debug messages for $pc,
9338 output the next instruction.
9339 If disassemble-next-line is set to on and there is line debug
9340 messages, output assembly codes for next line.
9341 (_initialize_stack): Make the "set disassemble-next-line"
9342 command an auto-boolean command. Change its class to
9343 class_stack. Place it in the top level set list. Extend help
9344 to describe the auto mode.
9346 2009-03-17 Pedro Alves <pedro@codesourcery.com>
9348 * infrun.c (normal_stop): Don't overwrite old_chain.
9350 2009-03-16 Joel Brobecker <brobecker@adacore.com>
9352 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
9353 which is undefined, by call to regcache_invalidate, which should
9354 do what the original author wanted to do.
9356 2009-03-16 Joel Brobecker <brobecker@adacore.com>
9358 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
9359 (mips_create_inferior): Likewise.
9361 2009-03-16 Joel Brobecker <brobecker@adacore.com>
9363 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
9365 2009-03-16 Joel Brobecker <brobecker@adacore.com>
9367 * darwin-nat.c (darwin_resume): Fix a compiler warning when
9368 building on x86_64-darwin.
9370 2009-03-16 Tristan Gingold <gingold@adacore.com>
9372 * configure.tgt: Add handling for x86_64-darwin.
9374 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
9376 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
9378 2009-03-15 Joel Brobecker <brobecker@adacore.com>
9380 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
9381 Use the ops parameter to get to the target beneath, rather than
9382 using the current_target global. Using the current_target global
9383 was an unintended accident.
9385 2009-03-15 Joel Brobecker <brobecker@adacore.com>
9387 Fix an error happening while loading symbols from a core file
9390 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
9391 to detect whether we're debugging a core file or not.
9393 2009-03-15 Joel Brobecker <brobecker@adacore.com>
9395 Modernize the aix-thread later by getting rid of the base_target
9396 global. This brings back to life the AIX port which was otherwise
9397 crashing all the time.
9399 * aix-thread.c (base_target): Delete.
9400 (pd_enable): Do not set base_target.
9401 (aix_thread_attach): Use find_target_beneath instead of base_target.
9402 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
9403 (aix_thread_fetch_registers, aix_thread_store_registers),
9404 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
9405 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
9406 (aix_thread_kill): Delete. Does not seem necessary.
9407 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
9409 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
9411 * stack.c (return_command <retval_exp>): New variables retval_expr
9412 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
9413 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
9414 if RETURN_TYPE is NULL.
9416 2009-03-14 Pedro Alves <pedro@codesourcery.com>
9418 * remote.c (PACKET_qAttached): New.
9419 (remote_query_attached): New.
9420 (remote_add_inferior): Add new `attached' argument. Handle it.
9421 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
9422 -1 to remote_add_inferior in new parameter.
9423 (extended_remote_attach_1): Adjust to pass 1 to
9424 remote_add_inferior in the new parameter.
9425 (extended_remote_create_inferior_1): Adjust to pass 0 to
9426 remote_add_inferior in the new parameter.
9427 (_initialize_remote): Add "set/show remote query-attached-packet"
9430 2009-03-13 Tom Tromey <tromey@redhat.com>
9432 * symtab.c (lookup_symbol_in_language): Use a cleanup.
9434 2009-03-13 Doug Evans <dje@google.com>
9436 * exceptions.h: Clean up some comments on catch_exceptions usage.
9437 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
9440 2009-02-17 Joel Brobecker <brobecker@adacore.com>
9442 The following patch helps getting rid of a warning inside solib-som.c.
9444 * source.c (source_full_path_of): Constify parameter filename.
9445 * defs.h (source_full_path_of): Update declaration accordingly.
9447 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9449 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
9450 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
9451 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
9453 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9455 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
9456 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
9458 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9460 * ada-tasks.c (ada_task_is_alive): Move up and make static.
9461 * ada-lang.h (ada_task_is_alive): Remove declaration.
9463 2009-03-12 Jerome Guitton <guitton@adacore.com>
9465 * ada-lang.c (ada_delta): Change the type of numerators and
9466 denominators to DOUBLEST, as they may not fit into a long.
9467 (scaling_factor): Ditto.
9469 2009-03-12 Jerome Guitton <guitton@adacore.com>
9471 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
9473 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9475 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
9476 types, if we are unable to determine the actual symbol type
9477 from its tag, then use the static approximation instead.
9479 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9481 Fix crash printing packed record with packed array.
9483 * ada-lang.c (ada_modulus_from_name): New function.
9484 (ada_modulus): In the case where the type length is bigger than
9485 the size of the type used to hold the bounds, try determining
9486 the modulus from the type name.
9487 (ada_value_primitive_packed_val): Fix bug in the computation of
9488 ntarg causing an out-of-buffer invalid access.
9490 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9492 Fix segfault when printing short_integer'last.
9494 * ada-lang.c (ada_find_any_type): Search in the primitive types
9495 if a symbol could not be found.
9497 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9499 * ada-tasks.c (task_states,long_task_states): Add new states
9500 Activating and Acceptor_Delay_Sleep. Update the description
9501 of state Acceptor_Sleep.
9503 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
9505 Fix a build failure on Darwin following some changes in
9506 the profile of some target_ops methods.
9508 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
9510 (darwin_stop_inferior, darwin_detach): Likewise.
9512 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
9514 Include token in ^running notification for CLI commands.
9516 * mi/mi-main.c (mi_execute_command): Set current_token here.
9517 (mi_cmd_execute): Do not set current_token here.
9519 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
9523 * mi/mi-main.c (mi_print_timing_maybe): New.
9524 (captured_mi_execute_command): Simplify. Output timings to
9526 (mi_execute_async_cli_command): Do not print timings.
9527 * mi/mi-main.h (mi_print_timing_maybe): Declare.
9528 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
9530 2009-03-12 Jerome Guitton <guitton@adacore.com>
9532 * xcoffread.c (process_linenos): Check if the line in the
9533 include table refers to the main source file and, if so,
9534 add them to the main subfile.
9536 2009-03-12 Joel Brobecker <brobecker@adacore.com>
9538 Fix a build failure on AIX introduced after a change in the profile
9539 of some of the "methods" in the target_ops structure.
9540 * aix-thread.c: Add missing target_ops parameter throughout.
9542 Implement Ada task switching on AIX.
9543 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
9544 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
9546 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
9548 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
9549 value_mark and value_free_to_mark.
9550 * objfiles.c (free_objfile): Call objfile_free_data before
9553 2009-03-10 Hui Zhu <teawater@gmail.com>
9555 * disasm.c (gdb_disassembly): Remove unused argument
9557 * disasm.h (gdb_disassembly): Ditto.
9558 * cli/cli-cmds.c (print_disassembly): Ditto.
9559 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
9561 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
9563 * solib.c (solib_contains_address_p): New function.
9564 (solib_name_from_address): Use it.
9565 * printcmd.c (display_uses_solib_p): Use it.
9566 * solib.h (solib_contains_address_p): Declare it.
9568 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
9570 * varobj.c (free_variable): Call value_free.
9572 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
9575 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
9576 Move the variable `macinfo_type' out of the loop. Create a new
9577 processing pass before the current one to pre-create `current_file'.
9578 New complaint on misplaced zero/non-zero definitions/includes.
9579 Skip first DW_MACINFO_start_file with `at_commandline' set.
9581 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
9583 * solib.c (reload_shared_libraries): Give
9584 inferior a chance to reset solib breakpoint.
9587 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
9589 * windows-nat.c (dr): Redefine to use largest possible integer which
9591 (cygwin_set_dr): Avoid coercion.
9593 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
9595 * windows-nat.c (windows_create_inferior): Implement --tty handling on
9598 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
9600 Rename solib_address to solib_name_from_address.
9601 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
9602 (disable_breakpoints_in_unloaded_shlib): Update.
9603 * printcmd.c (display_uses_solib_p): Likewise.
9604 * stack.c (print_frame): Likewise.
9608 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
9610 * printcmd.c (do_one_display): Reparse exp_string.
9611 (display_uses_solib_p): New function.
9612 (clear_dangling_display_expressions): New function.
9613 (_initialize_printcmd): Add observer.
9614 * solib.c (no_shared_libraries): Swap order of calls to
9615 clear_solib and objfile_purge_solibs.
9617 2009-03-05 Joel Brobecker <brobecker@adacore.com>
9619 Implement the target-specific part of Ada tasking support
9622 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
9623 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
9625 2009-03-05 Joel Brobecker <brobecker@adacore.com>
9627 Get rid of the global "base_target" and use "find_target_beneath"
9628 to find the underlying target.
9629 * dec-thread.c (base_target): Delete.
9630 (enable_dec_thread): Remove assignement to base_target.
9631 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
9632 (dec_thread_fetch_registers, dec_thread_store_registers)
9633 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
9634 Update the function profile if necessary.
9635 Use find_target_beneath to call the same method but from
9636 the underlying target, removing the need for "base_target".
9638 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
9639 Fix a copy/paste error in a few debug traces...
9641 * solib-osf.c (init_so): Use a simpler method for computing
9642 the size of lm_info structure. This also gets rid of warning
9643 emitted by the compiler.
9645 2009-03-05 Pedro Alves <pedro@codesourcery.com>
9647 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
9648 duplicates of permanent breakpoints.
9650 2009-03-04 Pedro Alves <pedro@codesourcery.com>
9652 * inferior.h (notice_new_inferior): Declare.
9653 * infcmd.c (notice_new_inferior): New.
9654 * remote.c (remote_add_inferior, remote_add_thread): New.
9655 (notice_new_inferiors): Rename to...
9656 (remote_notice_new_inferior): ... this. Add RUNNING argument.
9657 Use remote_add_thread instead of add_thread, passing it the
9658 RUNNING argument. Add an inferior with remote_add_inferior. If
9659 we just learned about an inferior, call notice_new_inferior.
9660 (record_currthread): Adjust.
9661 (remote_threads_info): Adjust to use remote_notice_new_inferior.
9662 (remote_start_remote, extended_remote_attach_1): Use
9663 remote_add_inferior.
9664 (process_stop_reply): Adjust. Call remote_notice_new_inferior
9665 after handling expedited registers and watchpoint state.
9666 (extended_remote_create_inferior_1): Use remote_add_inferior.
9668 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
9670 * infcmd.c (registers_info): Remove register number case.
9672 2009-03-03 Pedro Alves <pedro@codesourcery.com>
9674 * top.c (quit_target): Check for target_has_execution before
9675 killing or detaching from inferiors.
9677 2009-03-02 Joel Brobecker <brobecker@adacore.com>
9679 Remove some unused routines.
9681 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
9683 * ada-lang.c (ada_task_list_iterator_ftype)
9684 (iterate_over_live_ada_tasks): Delete.
9685 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
9688 2009-03-01 Doug Evans <dje@google.com>
9690 * symtab.c: Remove trailing whitespace throughout the file.
9691 (expand_line_sal): Fix some typos and whitespace.
9693 * Makefile.in (clean): rm -f $(DEPDIR)/*.
9695 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
9696 (init.c): signals/ -> common/.
9697 (signals.o): Update.
9698 * target.h (target_signal_to_string,target_signal_to_string)
9699 (target_signal_from_name,target_signal_to_host_p)
9700 (target_signal_from_host,target_signal_to_host): Move to ...
9701 * common/gdb_signals.h: ... here. New file.
9702 * common/signals.c: Moved here from signals/signals.c.
9703 #include gdb_signals.h, remove #include of target.h in gdb case.
9704 (target_signal_from_command,default_target_signal_to_host)
9705 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
9707 Include thread ID in target_wait debugging output.
9708 * infrun.c (print_target_wait_results): New function.
9709 (wait_for_inferior,fetch_inferior_event): Call it.
9711 2009-02-27 Pedro Alves <pedro@codesourcery.com>
9713 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
9714 with a ptid_t field.
9715 * linux-thread-db.c (thread_get_info_callback): Build the ptid
9716 using the pid stored in proc_handle.ptid.
9717 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
9718 (check_for_thread_db, thread_db_detach, check_event)
9719 (thread_db_mourn_inferior, find_new_threads_callback)
9720 (thread_db_find_new_threads_1): Adjust.
9721 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
9722 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
9724 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
9726 * valprint.c (read_string): Rework clean-up logic. Use
9727 free_current_contents to clean-up buffer.
9729 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
9731 * MAINTAINERS: Update e-mail address.
9733 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
9735 * python/python-utils.c (python_string_to_unicode): Always return
9737 (python_string_to_target_string): Decrement transient python
9739 (python_string_to_host_string): Likewise.
9741 2007-02-26 Pedro Alves <pedro@codesourcery.com>
9743 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
9744 call to super_fetch_registers.
9745 (mips64_linux_store_registers): Pass `ops' to call to
9746 super_store_registers.
9748 2009-02-25 Doug Evans <dje@google.com>
9750 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
9753 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
9754 disabled_shlib_breaks, unused.
9756 * printcmd.c (build_address_symbolic): Fix comment.
9758 2009-02-25 Hui Zhu <teawater@gmail.com>
9760 * cli/cli-script.c (define_command): Add _() to query.
9761 * gnu-nat.c (inf_validate_task_sc): Ditto.
9762 * infcmd.c (kill_if_already_running): Ditto.
9763 (jump_command): Ditto.
9764 (attach_command): Ditto.
9765 * inflow.c (kill_command): Ditto.
9766 * infrun.c (handle_command): Ditto.
9767 * maint.c (maintenance_dump_me): Ditto.
9768 * memattr.c (mem_delete_command): Ditto.
9769 * monitor.c (monitor_interrupt_query): Ditto.
9770 * nto-procfs.c (interrupt_query): Ditto.
9771 * printcmd.c (undisplay_command): Ditto.
9772 * remote-mips.c (mips_kill): Ditto.
9773 * remote.c (interrupt_query): Ditto.
9774 * solib-irix.c (irix_open_symbol_file_object): Ditto.
9775 * solib-osf.c (osf_open_symbol_file_object): Ditto.
9776 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
9777 * solib-som.c (som_open_symbol_file_object): Ditto.
9778 * solib-svr4.c (open_symbol_file_object): Ditto.
9779 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
9780 * target.c (kill_or_be_killed): Ditto.
9781 * tracepoint.c (delete_trace_command): Ditto.
9782 * top.c (quit_confirm): Add _() to s that will be used
9785 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
9787 Fix windows-nat.c compilation failure.
9789 * windows-nat.c (windows_thread_alive): Fix forward declaration.
9790 (get_windows_debug_event): Add ops parameter to call to windows_resume.
9792 2009-02-23 Pedro Alves <pedro@codesourcery.com>
9794 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
9796 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
9798 * symtab.c (find_line_symtab): Initialize exact to avoid
9801 2009-02-23 Pedro Alves <pedro@codesourcery.com>
9803 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
9804 `ops' to recursive call.
9806 2009-02-23 Pedro Alves <pedro@codesourcery.com>
9808 * corelow.c (get_core_registers): Adjust.
9809 (core_file_thread_alive): Rename to...
9810 (core_thread_alive): ... this.
9811 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
9812 (init_core_ops): Adjust.
9813 (coreops_suppress_target): Delete.
9814 (_initialize_corelow): Unconditionally add core_ops.
9815 * procfs.c: Include "inf-child.h".
9816 (procfs_ops): Delete.
9817 (init_procfs_ops): Delete. Reimplement as...
9818 (procfs_target): ... this, inheriting from inf-child.
9819 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
9820 (procfs_prepare_to_store): Delete.
9821 (procfs_store_registers, procfs_resume): Adjust.
9822 (procfs_open): Delete.
9823 (procfs_suppress_run): Delete.
9824 (procfs_can_run): Delete.
9825 (procfs_mourn_inferior): Adjust.
9826 (procfs_init_inferior): Add target_ops parameter. Adjust.
9827 (procfs_create_inferior): Don't pass procfs_init_inferior to
9828 fork_inferior. Instead call it after fork_inferior returns.
9829 (procfs_find_new_threads): Adjust.
9830 (_initialize_procfs): Adjust to use procfs_target instead of
9832 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
9833 (lwp_to_thread): Use target_thread_alive.
9834 (sol_thread_open): Delete.
9835 (sol_thread_attach): Delete.
9836 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
9837 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
9838 to use find_target_beneath.
9839 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
9840 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
9841 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
9842 (check_for_thread_db): New.
9843 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
9844 (sol_thread_new_objfile): Call check_for_thread_db.
9845 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
9846 (sol_thread_can_run): Delete.
9847 (sol_thread_alive): Adjust to use find_target_beneath.
9848 (sol_thread_stop): Delete.
9849 (rw_common): Use target_write_memory or target_read_memory.
9850 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
9851 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
9852 (solaris_pid_to_str): Remove check for libthread_db initialization
9854 (sol_find_new_threads): Remove check for libthread_db
9855 initialization failing, or for an invalid inferior_ptid. Adjust
9856 to use find_target_beneath.
9857 (sol_core_open, sol_core_close, sol_core_detach,
9858 sol_core_files_info, sol_find_memory_regions,
9859 sol_make_note_section, ignore): Delete.
9860 (init_sol_thread_ops): Make it a thread_stratum target. Remove
9861 unneeded callback settings.
9862 (init_sol_core_ops): Delete.
9863 (_initialize_sol_thread): No longer call init_sol_core_ops, set
9864 procfs_suppress_run, or hack with core_ops.
9866 * target.h (struct target_ops): Add a target_ops * parameter to
9867 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
9868 and to_find_new_threads.
9869 (target_fetch_registers, target_store_registers)
9870 (target_thread_alive, target_find_new_threads): Redeclare as
9873 * target.c (update_current_target): Do not inherit or de_fault
9874 to_resume, to_fetch_registers, to_store_registers,
9875 to_thread_alive, to_find_new_threads.
9876 (target_resume): Adjust.
9877 (target_thread_alive, target_find_new_threads): New.
9878 (debug_to_resume, debug_to_fetch_registers): Delete.
9879 (target_fetch_registers): New.
9880 (debug_to_store_registers): Delete.
9881 (target_store_registers): New.
9882 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
9883 (setup_target_debug): Adjust.
9885 * gdbcore.h (core_ops): Delete declaration.
9887 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
9888 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
9889 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
9890 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
9891 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
9892 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
9893 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
9894 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
9895 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
9896 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
9897 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
9898 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
9899 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
9900 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
9902 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
9903 * gdbarch.h, gdbarch.c: Regenerate.
9905 * sol2-tdep.c: Include "inferior.h".
9906 (sol2_core_pid_to_str): New.
9907 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
9909 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
9910 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
9911 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
9912 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
9914 2009-02-22 Doug Evans <dje@google.com>
9916 * exec.c (exec_file_attach): Fix comment.
9918 2009-02-22 Pedro Alves <pedro@codesourcery.com>
9920 Silence a few -Wmissing-prototypes warnings.
9923 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
9925 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
9926 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
9927 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
9928 (_initialize_amd64nbsd_tdep): ... this.
9929 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
9930 (_initialize_arm_linux_tdep): Declare.
9931 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
9932 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
9933 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
9934 * avr-tdep.c (avr_return_value): Make it static.
9935 (avr_frame_unwind_cache): Ditto.
9936 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
9937 (bsd_uthread_solib_loaded): Ditto.
9938 (bsd_uthread_solib_unloaded): Ditto.
9939 (bsd_uthread_target): Ditto.
9940 (_initialize_bsd_uthread): Declare.
9941 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
9942 (cris_frame_unwind_cache): Ditto.
9943 * frv-tdep.c (frv_return_value): Ditto.
9944 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
9945 (h8300h_use_struct_convention): Ditto.
9946 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
9948 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
9950 * hppabsd-tdep.c: Include hppabsd-tdep.h.
9951 (hppabsd_find_global_pointer): Make it static.
9952 * hppabsd-tdep.h: New.
9953 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
9954 (hppabsd_init_abi): Remove declaration.
9955 (_initialize_hppabsd_tdep): Remove declaration.
9956 (_initialize_hppanbsd_tdep): Declare.
9957 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
9958 (hppabsd_init_abi): Delete declaration.
9959 (hppaobsd_init_abi): Make it static.
9960 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
9961 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
9962 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
9963 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
9964 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
9965 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
9966 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
9967 (_initialize_m32c_tdep): Declare.
9968 * m32r-rom.c (_initialize_m32r_rom): Declare.
9969 * m32r-tdep.c (m32r_skip_prologue): Make it static.
9970 (m32r_return_value): Ditto.
9971 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
9972 (m68hc11_return_value): Ditto.
9973 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
9974 * m88k-tdep.c (m88k_frame_cache): Make it static.
9975 * mep-tdep.c (mep_gdb_print_insn): Ditto.
9976 (mep_return_value): Ditto.
9977 (_initialize_mep_tdep): Declare.
9978 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
9979 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
9980 (mips_linux_syscall_next_pc): Ditto.
9981 (_initialize_mips_linux_tdep): Declare.
9982 * mips-tdep.c (mips_single_step_through_delay): Make it static.
9983 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
9984 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
9985 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
9986 * mt-tdep.c (_initialize_mt_tdep): Declare.
9987 * nbsd-tdep.c: Include nbsd-tdep.h.
9988 * nto-tdep.c (find_load_phdr): Make it static.
9989 (_initialize_nto_tdep): Declare.
9990 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
9992 (_initialize_ppc_linux_tdep): Declare.
9993 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
9994 (m32r_insert_watchpoint, m32r_remove_watchpoint)
9995 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
9997 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
9998 * rs6000-nat.c: Include xcoffread.h.
9999 (find_toc_address): Don't extern declare get_toc_offset. Adjust
10000 to call xcoff_get_to_offset.
10001 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
10002 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
10003 (rs6000_skip_trampoline_code): Make static.
10004 * s390-tdep.c (s390_regset_from_core_section): Ditto.
10005 * sh-tdep.c (sh_register_reggroup_p): Ditto.
10006 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
10007 (_initialize_shnbsd_tdep): Declare.
10008 * solib-frv.c (displacement_from_map): Make static.
10009 (_initialize_frv_solib): Declare.
10010 * solib-irix.c (fetch_lm_info): Make static.
10011 (_initialize_irix_solib): Declare.
10012 * solib-som.c: Include solib-som.h.
10013 (som_solib_select): Line break.
10014 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
10015 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
10016 (_initialize_sparcnbsd_tdep): ... this.
10017 * spu-tdep.c (spu_software_single_step): Make it static.
10018 (_initialize_spu_tdep): Declare.
10019 * vax-tdep.c (vax_frame_cache): Make it static.
10020 * xcoffread.c: Include xcoffread.h.
10021 (get_toc_offset): Rename to ...
10022 (xcoff_get_toc_offset): ... this.
10023 (_initialize_xcoffread): Declare.
10024 * xcoffread.h: New.
10025 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
10026 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
10028 (_initialize_xtensa_tdep): Declare.
10030 2008-02-21 Pedro Alves <pedro@codesorcery.com>
10032 Silence a few -Wmissing-prototypes warnings.
10035 * amd64-nat.c: Include "amd64-nat.h".
10036 * fork-child.c (_initialize_fork_child): Ditto.
10037 * gcore.c (_initialize_gcore): Ditto.
10038 * inf-ptrace.c: Include "inf-ptrace.h".
10039 (inf_ptrace_store_registers): Make it static.
10040 * linux-nat.c (linux_nat_terminal_ours): Make it static.
10041 (_initialize_linux_nat): Declare before definition.
10042 * linux-tdep.c: Include "linux-tdep.h".
10043 * linux-thread-db.c (_initialize_thread_db): Declare before
10045 * proc-service.c (_initialize_proc_service): Ditto.
10046 * remote.c (remote_send_printf): Make it static.
10047 * solib.c: Include "solib.h".
10048 * symfile-mem.c (_initialize_symfile_mem): Declare before
10050 * ada-lang.c (ada_la_decode, ada_match_name)
10051 (ada_suppress_symbol_printing, ada_is_array_type)
10052 (ada_value_ptr_subscript, ada_array_length)
10053 (ada_to_static_fixed_value): Make them static.
10054 (_initialize_ada_language): Declare before definition.
10055 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
10056 (ada_task_list_changed, ada_new_objfile_observer): Make them
10058 (_initialize_tasks): Declare before definition.
10059 * addrmap.c (_initialize_addrmap): Declare before definition.
10060 * auxv.c (default_auxv_parse): Make it static.
10061 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
10063 * breakpoint.c (remove_sal): Add line break.
10064 (expand_line_sal_maybe): Make it static.
10065 * cp-name-parser.y: Include "cp-support.h".
10066 * cp-valprint.c (cp_find_class_member): Make it static.
10067 * eval.c (value_f90_subarray): Ditto.
10068 * exceptions.c (print_any_exception): Ditto.
10069 * findcmd.c (_initialize_mem_search): Declare before definition.
10070 * frame.c (frame_observer_target_changed): Make it static.
10071 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
10072 * inf-child.c: Include "inf-child.h".
10073 * inferior.h (valid_inferior_id): Rename to ...
10074 (valid_gdb_inferior_id): ... this.
10075 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
10077 * jv-lang.c (java_language_arch_info): Make it static.
10078 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
10079 * osdata.c (info_osdata_command): Make it static.
10080 * regcache.c (regcache_observer_target_changed): Make it static.
10081 * reverse.c (_initialize_reverse): Declare before definition.
10082 * stabsread.c (cleanup_undefined_types_noname)
10083 (cleanup_undefined_types_1): Make them static.
10084 * symfile.c (place_section): Make it static.
10085 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
10086 * target-descriptions.c (_initialize_target_descriptions): Declare
10088 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
10089 (find_default_is_async_p, find_default_supports_non_stop): Make
10091 (target_supports_non_stop): Add prototype.
10092 (dummy_pid_to_str): Make it static.
10093 * utils.c (_initialize_utils): Declare before definition.
10094 * ada-exp.y (_initialize_ada_exp): Declare before definition.
10095 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
10096 * target.h (struct target_ops): Add a prototype to the
10097 to_can_execute_reverse callback.
10098 * macroscope.c (_initialize_macroscope): Declare before definition.
10099 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
10100 * python/python.c (_initialize_python): Declare before definition.
10101 * tui/tui-command.c: Include "tui/tui-command.h".
10102 * tui/tui-data.c (init_content_element, init_win_info): Make them
10104 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
10105 * tui/tui-interp.c (_initialize_tui_interp): Declare before
10107 * tui/tui-layout.c: Include "tui/tui-layout.h".
10108 (_initialize_tui_layout): Declare before definition.
10109 * tui/tui-regs.c: Include "tui/tui-regs.h".
10110 (tui_display_reg_element_at_line): Make it static.
10111 (_initialize_tui_regs): Declare before definition.
10112 * tui/tui-stack.c (_initialize_tui_stack): Declare before
10114 * tui/tui-win.c: Include "tui/tui-win.h".
10115 (_initialize_tui_win): Declare before definition.
10116 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
10117 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
10118 (tui_get_cmd_list): Add a prototype.
10119 * tui/tui-windata.c: Include tui-windata.h.
10120 * tui/tui-wingeneral.c (box_win): Make it static.
10121 * cli/cli-logging.c (show_logging_command): Make it static.
10122 (_initialize_cli_logging): Declare before definition.
10123 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
10126 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
10128 Extend use of i386_use_watchpoints to all i386 native files
10129 using hardware watchpoints.
10130 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
10131 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
10132 * windows-nat.c (init_windows_ops): Ditto.
10133 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
10134 * config/i386/nm-cygwin64.h: Ditto.
10135 * config/i386/nm-fbsd.h: Ditto.
10136 * config/i386/nm-go32.h: Ditto.
10138 2009-02-19 Joel Brobecker <brobecker@adacore.com>
10140 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
10142 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
10144 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
10145 (mi_interpreter_init): Register the above.
10146 * solib.c (clear_solib): Notify solib unload.
10147 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
10148 disable breakpoints on a.out targets.
10150 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
10152 * observer.c (observer_test_first_notification_function)
10153 (observer_test_second_notification_function)
10154 (observer_test_third_notification_function): Adjust prototype.
10156 2009-02-17 Pedro Alves <pedro@codesourcery.com>
10158 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
10159 (ALL_TARGET_OBS): Add dicos-tdep.o.
10160 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
10161 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
10163 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
10165 * dicos-tdep.h, dicos-tdep.c: New.
10166 * amd64-dicos-tdep.c: New.
10167 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
10168 inferior.h. Include dicos-tdep.h.
10169 (i386_dicos_init_abi): Call dicos_init_abi.
10170 (i386_dicos_bfd_has_symbol_p): Delete.
10171 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
10173 * NEWS: Mention x86-64 DICOS target support.
10175 2009-02-16 Doug Evans <dje@google.com>
10177 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
10178 All callers updated.
10179 (amd64_get_insn_details): Handle more 3-byte opcode insns.
10180 (amd64_breakpoint_p): Delete.
10181 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
10182 don't back up pc to the start of the int3.
10183 * i386-tdep.c: #include opcode/i386.h.
10184 (i386_skip_prefixes): New function.
10185 (i386_absolute_jmp_p): Constify argument.
10186 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
10187 (i386_breakpoint_p): Delete.
10188 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
10189 When fixing up after stepping an int3, don't back up pc to the start
10192 2009-02-16 Pedro Alves <pedro@codesourcery.com>
10194 * corelow.c (core_close): Don't hardcode the core's pid.
10195 (core_open): Find core threads before calling
10196 post_create_inferior.
10197 (add_to_thread_list, get_core_register_section): Take into account
10198 systems where the regset section names encode the pid of the
10201 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
10202 * gdbarch.h, gdbarch.c: Regenerate.
10204 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
10205 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
10206 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
10207 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
10209 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
10211 Include frame information for *stopped due to CLI commands.
10213 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
10214 * infcmd.c (finish_command_continuation): Pass '1' for
10215 'print_frame' parameter to the observer.
10216 * infrun.c (normal_stop): Don't print mi-specific information
10217 here. Pass 'stop_print_frame' to the 'print_frame' parameter
10219 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
10220 If we need to print frame, and current uiout is not the MI one,
10223 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
10225 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
10226 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
10228 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
10231 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
10232 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
10234 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
10236 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
10237 for DW_ATE_signed_char and DW_ATE_unsigned_char
10238 for pascal language.
10240 2009-02-11 Jim Meyering <meyering@redhat.com>
10241 Jan Kratochvil <jan.kratochvil@redhat.com>
10243 Avoid NULL dereference.
10244 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
10245 New variable func_type.
10247 2009-02-11 Pedro Alves <pedro@codesourcery.com>
10249 * gdbarch.c: Regenerate.
10251 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
10253 * p-lang.c (is_pascal_string_type): Fix comment.
10254 Determine exact size of char elements for GPC
10256 (pascal_printstr): Handle char width of 2 or 4.
10257 * p-valprint.c (pascal_val_print): Handle char
10260 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
10262 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
10263 inside the loop. Only call addrmap_set_empty if the compilation unit
10264 had DW_AT_high_pc and DW_AT_low_pc. Update call to
10265 scan_partial_symbols.
10266 (scan_partial_symbols): Take NEED_PC argument and pass it along with
10268 (add_partial_namespace): Take NEED_PC argument and pass it through.
10269 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
10272 2009-02-07 Pedro Alves <pedro@codesourcery.com>
10274 * NEWS: Mention inspecting extra signal information, $_siginfo,
10275 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
10277 2009-02-07 Pedro Alves <pedro@codesourcery.com>
10279 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
10282 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10284 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
10285 (compat_timer_t, compat_clock_t, struct compat_timeval)
10286 (compat_sigval_t, compat_siginfo_t): New types.
10287 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
10288 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
10289 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
10290 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
10291 (amd64_linux_siginfo_fixup): New.
10292 * linux-nat.c (linux_nat_siginfo_fixup): New.
10293 (siginfo_fixup): New.
10294 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
10295 siginfo layout expected by ptrace and the siginfo layout of the
10297 (linux_nat_set_siginfo_fixup): New.
10298 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
10300 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10302 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
10303 * infrun.c (siginfo_value_read, siginfo_value_write): New.
10304 (siginfo_value_funcs): New.
10305 (siginfo_make_value): New.
10306 (_initialize_infrun): Create the $_siginfo convenience variable.
10307 * gdbtypes.h (append_composite_type_field_aligned): Declare.
10308 * gdbtypes.c (append_composite_type_field): Rename to...
10309 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
10310 argument. Handle it.
10311 (append_composite_type_field): Rewrite on top of
10312 append_composite_type_field_aligned.
10313 * value.h (internalvar_make_value): New typedef.
10314 (struct internalvar) <make_value>: New field.
10315 (create_internalvar_type_lazy): Declare.
10316 * value.c (create_internalvar): Clear make_value.
10317 (create_internalvar_type_lazy): New.
10318 (value_of_internalvar): If make_value is set use it.
10319 (preserve_values): Skip internal variables that don't have a
10321 * gdbarch.sh (get_siginfo_type): New.
10322 * gdbarch.h, gdbarch.c: Regenerate.
10324 * linux-tdep.h, linux-tdep.c: New.
10325 * amd64-linux-tdep.c: Include "linux-tdep.h".
10326 (amd64_linux_init_abi): Register linux_get_siginfo_type and
10327 linux_get_siginfo_mapper.
10328 * i386-linux-tdep.c: Include "linux-tdep.h".
10329 (i386_linux_init_abi): Register linux_get_siginfo_type and
10330 linux_get_siginfo_mapper.
10331 * arm-linux-tdep.c: Include "linux-tdep.h".
10332 (i386_linux_init_abi): Register linux_get_siginfo_type and
10333 linux_get_siginfo_mapper.
10335 * linux-nat.c (linux_xfer_siginfo): New.
10336 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
10337 * remote.c (PACKET_qXfer_siginfo_read)
10338 (PACKET_qXfer_siginfo_write): New.
10339 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
10340 "qXfer:siginfo:write" features.
10341 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
10342 (_initialize_remote): Add "set/show remote read-siginfo-object"
10343 and "set/show remote write-siginfo-object" commands.
10345 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
10346 (HFILES_NO_SRCDIR): Add linux-tdep.h.
10347 (ALLDEPFILES): Add linux-tdep.c.
10349 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
10350 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
10353 2009-02-06 Jim Blandy <jimb@codesourcery.com>
10354 Daniel Jacobowitz <dan@codesourcery.com>
10355 Vladimir Prus <vladimir@codesourcery.com>
10356 Pedro Alves <pedro@codesourcery.com>
10358 * defs.h (enum lval_type): New value: lval_computed.
10359 * value.h (struct lval_funcs): New type.
10360 (allocate_computed_value, value_computed_funcs)
10361 (value_computed_closure): New declarations.
10362 * value.c (struct value): Add a structure to the location union
10363 for computed lvalues, containing 'funcs' and 'closure' members.
10364 (allocate_computed_value, value_computed_funcs)
10365 (value_computed_closure): New functions.
10366 (value_free): For computed lvalues, call the closure's
10367 'free_closure' function before freeing the value itself.
10368 (value_copy): If we're copying an lval_computed value, call the
10369 closure's 'copy_closure' function.
10370 (set_value_component_location): If the original value is a
10371 computed lvalue, then call the closure's 'copy_closure' function.
10372 (value_of_internalvar): If an internal variable's value is a
10373 computed lvalue, make retrieving its value produce an equivalent
10375 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
10376 their read function.
10377 (value_assign): Assign to computed lvalues by calling their write
10380 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10382 * linux-nat.c (linux_nat_wait): Adjust.
10383 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
10384 * linux-nat.h (thread_db_init): Delete declaration.
10385 * linux-thread-db.c (target_beneath): Delete.
10386 (thread_db_init): Delete.
10387 (thread_db_detach): Use find_target_beneath.
10388 (thread_db_wait): Adjust interface. Use find_target_beneath.
10389 (thread_db_mourn_inferior): Use find_target_beneath.
10390 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
10391 (thread_db_async_mask): Delete.
10392 (thread_db_pid_to_str): Adjust interface. Use
10393 find_target_beneath.
10394 (thread_db_get_thread_local_address): Adjust interface. Use
10395 find_target_beneath.
10396 (init_thread_db_ops): Delete references to delete functions.
10397 * target.c (update_current_target): Don't inherit or default
10398 to_wait. Don't inherit to_pid_to_str and
10399 to_get_thread_local_address.
10400 (target_translate_tls_address): Look for a pushed target that
10401 implements to_get_thread_local_address, and use it instead of
10402 checking for target_get_thread_local_address_p.
10403 (target_wait, target_pid_to_str): Reimplement as functions.
10404 (dummy_pid_to_str): New.
10405 (init_dummy_target): Register it.
10406 (debug_to_wait): Delete.
10407 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
10408 to_get_thread_local_address accept a pointer to struct target_ops.
10409 (target_wait): Delete macro, and declare as function.
10410 (target_pid_to_str): Likewise.
10411 (target_get_thread_local_address)
10412 (target_get_thread_local_address_p): Delete.
10413 (noprocess): Add NORETURN and ATTR_NORETURN tags.
10414 * inf-ptrace.c (inf_ptrace_wait): Adjust.
10415 (inf_ptrace_pid_to_str): New.
10416 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
10417 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
10418 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
10419 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
10421 * corelow.c (core_pid_to_str): Adjust.
10422 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
10423 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
10424 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
10425 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
10426 * hpux-thread.c (hpux_thread_wait): Adjust.
10427 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
10428 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
10429 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
10430 * procfs.c (procfs_pid_to_str): Adjust.
10431 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
10432 * remote-mips.c (mips_wait): Adjust.
10433 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
10434 * remote.c (remote_wait, remote_pid_to_str)
10435 (remote_get_thread_local_address): Adjust.
10436 * rs6000-nat.c (rs6000_wait): Adjust.
10437 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
10438 (sol_thread_wait, solaris_pid_to_str): Adjust.
10439 * spu-linux-nat.c (spu_child_wait): Adjust.
10440 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
10442 2009-02-06 Tom Tromey <tromey@redhat.com>
10444 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
10445 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
10446 (python-cmd.o): New target.
10447 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
10448 completer prototype.
10449 (add_cmd): Initialize destroyer member of cmd_list_element. Use
10450 make_symbol_completion_list_fn as completer.
10451 (delete_cmd): Call destroyer if one is set.
10452 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
10453 completer member. Add destroyer member.
10454 (set_cmd_completer): Add self parameter to
10455 completer prototype.
10456 * command.h (set_cmd_completer): Add cmd parameter to
10457 completer prototype.
10458 * completer.c (noop_completer, filename_completer,
10459 location_completer, expression_completer, command_completer): Adapt
10460 to new completer prototype.
10461 (complete_line_internal): Pass new parameter to completer function.
10462 * completer.h (noop_completer, filename_completer,
10463 location_completer, expression_completer, command_completer): Adapt
10464 prototypes to new completer prototype.
10465 * interps.c (interpreter_completer): Adapt to new completer
10467 * python/python-cmd.c: New file.
10468 * python/python-internal.h (gdbpy_initialize_commands): Add
10470 (gdbpy_doc_cst): Add forward declaration.
10471 * python/python.c (gdbpy_doc_cst): Declare.
10472 (_initialize_python): Call gdbpy_initialize_commands. Initialize
10474 * symtab.c (make_symbol_completion_list_fn): New function.
10475 * symtab.h (make_symbol_completion_list_fn): Add prototype.
10477 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10479 * target.c (target_get_osdata): Check for equal or higher than
10480 process_stratum, not dummy_stratum.
10482 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10484 * remote.c (extended_remote_can_run): Delete.
10485 (init_remote_ops): Don't register it.
10486 * target.c (target_get_osdata): Don't check for target_can_run.
10487 Instead any target that has already been pushed, otherwise
10488 fallback to the default run target.
10490 2009-02-06 Pedro Alves <pedro@codesourcery.com>
10492 * target.c (target_create_inferior, target_detach)
10493 (target_mourn_inferior, target_attach, target_close): Do target
10495 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
10496 (debug_to_mourn_inferior, debug_to_close): Delete.
10497 (setup_target_debug): Adjust.
10499 2009-02-05 Pedro Alves <pedro@codesourcery.com>
10501 * target.h (target_stopped_data_address_p): Delete declaration,
10502 and don't define as macro.
10503 * target.c (target_stopped_data_address_p): Delete.
10505 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
10506 Tom Tromey <tromey@redhat.com>
10508 * python/python-utils.c (target_string_to_unicode): New function.
10509 * python/python-internal.h (target_string_to_unicode): New prototype.
10510 * python/python-value.c (valpy_string): New function.
10511 (value_object_methods): Add `string' entry.
10513 2009-02-05 Pedro Alves <pedro@codesourcery.com>
10515 * target.h (target_tid_to_str): Delete.
10516 * thread.c (print_thread_info, thread_apply_all_command)
10517 (thread_apply_command, thread_command, do_captured_thread_select):
10518 Use target_pid_to_str instead of target_tid_to_str.
10519 * linux-fork.c (delete_fork_command): Likewise.
10521 2009-02-05 Pedro Alves <pedro@codesourcery.com>
10523 * frame.c (has_stack_frames): Make public.
10524 (get_prev_frame): Don't allow a NULL this_frame anymore.
10525 * frame.h (has_stack_frames): Declare.
10526 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
10527 to get_prev_frame, instead start at get_current_frame.
10528 (varobj_create): Check has_stack_frames before getting any frame;
10529 eliminate one usage of deprecated_safe_get_selected_frame.
10531 2009-02-05 Tom Tromey <tromey@redhat.com>
10532 Thiago Jung Bauermann <bauerman@br.ibm.com>
10534 * python/python.c (GdbMethods): Move to bottom of file.
10535 (get_parameter, execute_gdb_command, gdbpy_write,
10536 gdbpy_flush): Remove forward declarations.
10537 (eval_python_from_control_command): Fix error checking of function
10538 PyRun_SimpleString. Fix error string.
10539 (python_command): Likewise.
10540 (execute_gdb_command): Added from_tty argument.
10542 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
10544 * language.h (language_dfn): Add la_get_string member.
10545 (LA_GET_STRING): New macro.
10546 (default_get_string): New prototype.
10547 * language.c (default_get_string): New function.
10548 (unknown_language_defn, auto_language_defn, local_language_defn): Use
10549 default_get_string for la_get_string.
10550 * c-lang.c (c_get_string): New function.
10551 (c_language_defn, cplus_language_defn, asm_language_defn): Use
10552 c_get_string for la_get_string.
10553 (minimal_language_defn): Likewise
10554 * ada-lang.c (ada_language_defn): Likewise.
10555 * f-lang.c (f_language_defn): Use default_get_string for
10557 * jv-lang.c (java_language_defn): Likewise.
10558 * m2-lang.c (m2_language_defn): Likewise.
10559 * objc-lang.c (objc_language_defn): Likewise.
10560 * p-lang.c (p_language_defn): Likewise.
10561 * scm-lang.c (scm_language_defn): Likewise.
10562 * typeprint.c (type_to_string): New function.
10563 * value.h (type_to_string): New prototype.
10564 * valprint.c (val_print_string): Factor out code for reading string
10565 from the inferior into its own function. Put 2 spaces after period
10567 (read_string): New function.
10568 * valprint.h (read_string): New prototype.
10570 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
10571 Tom Tromey <tromey@redhat.com>
10573 PR breakpoints/8079:
10574 * breakpoint.c (print_one_breakpoint): Use exp_string field
10575 to display expression of watchpoints.
10576 (mention): Likewise.
10577 (watch_command_1): Remove trailing whitespace from expression.
10578 * printcmd.c (struct display) <exp_string>: New field.
10579 (display_command): Set exp_string.
10580 (free_display): Free exp_string.
10581 (clear_displays): Use free_display.
10582 (do_one_display): Print exp_string.
10583 (display_info): Likewise.
10585 2009-02-04 Tom Tromey <tromey@redhat.com>
10586 Thiago Jung Bauermann <bauerman@br.ibm.com>
10587 Phil Muldoon <pmuldoon@redhat.com>
10589 * python/python-internal.h (gdbpy_get_value_from_history): Rename
10590 prototype to gdbpy_history.
10591 (gdbpy_is_string): Declare.
10592 (python_string_to_host_string): Declare.
10593 * python/python-utils.c (gdbpy_is_string): New function.
10594 (unicode_to_encoded_string): New function.
10595 (unicode_to_target_string): Use it.
10596 (python_string_to_host_string): New function.
10597 * python/python-value.c (valpy_address): New function.
10598 (convert_value_from_python): Use gdbpy_is_string. Change to throw
10599 Python exception instead of a GDB exception on error. Properly check
10601 (valpy_getitem): Convert field name to host string. Handle array
10602 accesses. Adapt to new behaviour of convert_value_from_python.
10603 (valpy_new): Adapt to new behaviour of convert_value_from_python.
10604 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
10605 VALPY_BITXOR, VALPY_BITOR>: New constants.
10606 (valpy_binop): Update. Adapt to new behaviour of
10607 convert_value_from_python.
10608 (valpy_invert): New function.
10609 (valpy_lsh): Likewise.
10610 (valpy_rsh): Likewise.
10611 (valpy_and): Likewise.
10612 (valpy_or): Likewise.
10613 (valpy_xor): Likewise.
10614 (valpy_richcompare): Call convert_value_from_python instead of doing
10615 conversions itself.
10616 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
10617 (gdbpy_get_value_from_history): Rename
10618 function to gdbpy_history.
10619 (gdbpy_initialize_values): Don't set tp_new.
10620 (value_object_type): Add valpy_new.
10621 (value_object_methods): Add `address' entry.
10622 (value_object_as_number): Update for new methods.
10623 * python/python.c (GdbMethods): Rename entry from
10624 `get_value_from_history' to `history'.
10626 2009-02-04 Jerome Guitton <guitton@adacore.com>
10628 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
10629 of type to guard against a crash.
10631 2009-02-04 Jerome Guitton <guitton@adacore.com>
10633 * value.c (value_from_contents_and_address): Always return
10634 a lval_memory value, even if address is null.
10636 2009-02-04 Tristan Gingold <gingold@adacore.com>
10638 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
10639 (amd64_darwin_sigcontext_addr): Ditto.
10640 (darwin_dwarf_signal_frame_p): Ditto.
10641 (i386_darwin_init_abi): Handle signal frames, use the const for
10643 (x86_darwin_init_abi_64): Ditto.
10645 2009-02-04 Tristan Gingold <gingold@adacore.com>
10647 * i386-tdep.c (i386_sigtramp_p): Make it public.
10648 * i386-tdep.h (i386_sigtramp_p): Declare.
10650 2009-02-04 Tristan Gingold <gingold@adacore.com>
10652 * machoread.c (macho_symfile_read): Read minsymtab also from
10654 (macho_symfile_read): Try to read dwarf2 frame info from main
10655 object file, but not from OSO files.
10656 (macho_symfile_offsets): Update section names for latest BFD
10658 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
10659 (x86_darwin_init_abi_64): Ditto.
10660 * solib-darwin.c: New file.
10661 * solib-darwin.h: New file.
10662 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
10664 2009-02-04 Tristan Gingold <gingold@adacore.com>
10666 * solist.h (struct target_so_ops): Comment fallback behavior for
10669 2009-02-03 Tom Tromey <tromey@redhat.com>
10671 * completer.c (add_struct_fields): Check type_name against NULL
10674 2009-02-03 Joel Brobecker <brobecker@adacore.com>
10676 * MAINTAINERS: Update Elena's email address.
10678 2009-02-02 Joel Brobecker <brobecker@adacore.com>
10680 * breakpoint (update_watchpoint): Minor comment adjustment.
10682 2009-02-02 Tom Tromey <tromey@redhat.com>
10685 * completer.c (count_struct_fields): Count method names.
10686 (add_struct_fields): Add matching method names.
10688 2009-02-02 Doug Evans <dje@google.com>
10690 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
10691 doing any further tcl/tk configury. Don't configure gdbtk if
10692 tcl or tk check fails.
10693 * aclocal.m4: Regenerate.
10694 * configure: Regenerate.
10696 2009-02-02 Tom Tromey <tromey@redhat.com>
10699 * valops.c (find_overload_match): Follow typedefs before taking
10700 address of object argument.
10702 2009-02-01 Doug Evans <dje@google.com>
10704 * target.h (target_waitstatus_to_string): Declare.
10705 * target.c (target_waitstatus_to_string): New function. Copied from
10706 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
10707 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
10708 TARGET_WAITKIND_NO_HISTORY.
10709 (debug_to_wait): Call it.
10710 * infrun.c (wait_for_inferior): If debug_infrun, print result of
10712 (fetch_inferior_event): Ditto.
10714 2009-01-30 Tom Tromey <tromey@redhat.com>
10716 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
10718 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
10721 * thread.c (do_captured_list_thread_ids): Report the current
10724 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
10726 * breakpoint.c (create_breakpoint, create_breakpoints)
10727 (break_command_really, set_breakpoint): New parameter enabled.
10728 (create_breakpoint, break_command_really): Make breakpoint
10729 disabled if so requested.
10730 * breakpoint.h (set_breakpoint): New parameter enabled.
10731 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
10733 2009-01-28 Doug Evans <dje@google.com>
10735 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
10736 (amd64_displaced_step_fixup): Declare.
10737 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
10738 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
10739 and make static global.
10740 (amd64_arch_regmap_len): New static global.
10741 (amd64_arch_reg_to_regnum): New function.
10742 (struct amd64_insn): New struct.
10743 (struct displaced_step_closure): New struct.
10744 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
10745 (rex_prefix_p,skip_prefixes)
10746 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
10747 (amd64_insn_length,amd64_get_unused_input_int_reg)
10748 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
10749 (amd64_displaced_step_copy_insn)
10750 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
10751 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
10752 (amd64_displaced_step_fixup): New functions.
10753 * amd64-linux-tdep.c: #include arch-utils.h.
10754 (amd64_linux_init_abi): Install displaced stepping support.
10756 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
10757 Jerome Guitton <guitton@adacore.com>
10759 * configure, config.in: Regenerated.
10760 * configure.ac: Add --with-system-gdbinit.
10761 * main.c (get_init_files): New.
10762 (captured_main): Use get_init_files. Load system gdbinit before
10764 (print_gdb_help): Print location of init files.
10766 2009-01-28 Pedro Alves <pedro@codesourcery.com>
10768 * corefile.c (generic_search): Delete disabled code.
10769 * gdbcore.h (generic_search): Delete declaration.
10771 2009-01-26 Pedro Alves <pedro@codesourcery.com>
10773 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
10774 parent to the child.
10775 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
10776 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
10777 remove_breakpoints to remove breakpoints from the parent.
10779 2009-01-26 Pedro Alves <pedro@codesourcery.com>
10781 PR backtrace/9458, PR backtrace/8864:
10782 * frame.c (create_new_frame): Update the frame's cached PC before
10783 finding its unwinder. Use frame_id_build to build the new frame's
10785 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
10786 array values from the ``args'' array values.
10788 2009-01-26 Pedro Alves <pedro@codesourcery.com>
10790 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
10791 (create_array_type, create_set_type, init_flags_type)
10792 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
10793 with a call to XZALLOC or XCALLOC, and pairs of calls to
10794 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
10796 2009-01-26 Pedro Alves <pedro@codesourcery.com>
10798 Add "maint set|show internal-error|internal-warning quit|corefile
10799 ask|yes|no" commands.
10802 * utils.c (internal_problem_ask, internal_problem_yes)
10803 (internal_problem_no, internal_problem_modes): New.
10804 (struct internal_problem): Remove FIXME. Make should_quit and
10805 should_dump_core types to char *.
10806 (internal_vproblem, internal_error_problem)
10807 (internal_warning_problem): Adjust.
10808 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
10810 (add_internal_problem_command): New.
10811 (_initialize_utils): New.
10813 2009-01-25 Pedro Alves <pedro@codesourcery.com>
10815 * infcmd.c (program_info): Use paddress instead of casting stop_pc
10818 2009-01-24 Pedro Alves <pedro@codesourcery.com>
10820 * infrun.c (normal_stop): Don't call
10821 deprecated_update_frame_pc_hack.
10822 * frame.c (deprecated_update_frame_pc_hack)
10823 (deprecated_update_frame_base_hack): Delete, and ...
10824 (create_new_frame): ... inline here.
10825 * frame.h (deprecated_update_frame_pc_hack)
10826 (deprecated_update_frame_base_hack): Delete declarations.
10828 2009-01-23 Pedro Alves <pedro@codesourcery.com>
10830 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
10831 * cli/cli-setshow.c (do_setshow_command): Handle it.
10832 * command.h (enum var_types): Add var_zuinteger.
10833 (add_setshow_zuinteger_cmd): Declare.
10835 * valprint.c (_initialize_valprint): Change the set input-radix
10836 and set output-radix commands to zuinteger type.
10838 2009-01-23 Pedro Alves <pedro@codesourcery.com>
10841 * infrun.c (normal_stop): Tag threads as stopped, and run the
10842 hook-stop before printing the stack frame.
10844 2009-01-22 Pedro Alves <pedro@codesourcery.com>
10847 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
10850 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
10852 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
10855 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
10858 * infcmd.c (signal_command): Do not specify a resume PC.
10860 2009-01-19 Doug Evans <dje@google.com>
10862 * dummy-frame.c (dummy_frame): Replace regcache member with
10864 (dummy_frame_push): Replace caller_regcache arg with caller_state.
10865 All callers updated.
10866 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
10867 (dummy_frame_pop): Rewrite. Verify requested frame is in the
10868 dummy frame stack. Restore program state.
10869 (cleanup_dummy_frames): Rewrite.
10870 (dummy_frame_sniffer): Update. Make static.
10871 * dummy-frame.h (regcache,frame_info): Delete forward decls.
10872 (inferior_thread_state): New forward decl.
10873 (dummy_frame_push): Update prototype.
10874 * frame.c (frame_pop): dummy_frame_pop now does all the work for
10876 * infcall.c (breakpoint_auto_delete_contents): Delete.
10877 (get_function_name,run_inferior_call): New fns.
10878 (call_function_by_hand): Simplify by moving some code to
10879 get_function_name, run_inferior_call. Inferior function call wrapped
10880 in TRY_CATCH so there's less need for cleanups and all exits from
10881 proceed are handled similarily. Detect program exit.
10882 Detect program stopping in a different thread.
10883 Make error messages more consistent.
10884 * inferior.h (inferior_thread_state): Declare (opaque type).
10885 (save_inferior_thread_state,restore_inferior_thread_state,
10886 make_cleanup_restore_inferior_thread_state,
10887 discard_inferior_thread_state, get_inferior_thread_state_regcache):
10889 (save_inferior_status): Update prototype.
10890 * infrun.c: (normal_stop): When stopped for the completion of an
10891 inferior function call, verify the expected stack frame kind.
10892 (inferior_thread_state): New struct.
10893 (save_inferior_thread_state,restore_inferior_thread_state,
10894 do_restore_inferior_thread_state_cleanup,
10895 make_cleanup_restore_inferior_thread_state,
10896 discard_inferior_thread_state,
10897 get_inferior_thread_state_regcache): New functions.
10898 (inferior_status): Move stop_signal, stop_pc, registers to
10899 inferior_thread_state. Remove restore_stack_info.
10900 (save_inferior_status): Remove arg restore_stack_info.
10901 All callers updated. Remove saving of state now saved by
10902 save_inferior_thread_state.
10903 (restore_inferior_status): Remove restoration of state now done by
10904 restore_inferior_thread_state.
10905 (discard_inferior_status): Remove freeing of registers, now done by
10906 discard_inferior_thread_state.
10908 2009-01-18 Pedro Alves <pedro@codesourcery.com>
10910 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
10911 at a time, times NUM_TO_SCROLL.
10912 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
10913 fetch the selected frame if there is no stack.
10915 2009-01-18 Pedro Alves <pedro@codesourcery.com>
10918 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
10920 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
10921 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
10922 is thrown while handling an event, finish the thread state.
10923 (normal_stop): Use finish_thread_state cleanup.
10924 * infcmd.c (run_command_1): If an error is thrown while starting
10925 the inferior, finish the thread state.
10927 2009-01-18 Pedro Alves <pedro@codesourcery.com>
10929 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
10930 skip breakpoints without a location (pending breakpoints).
10932 2009-01-18 Pedro Alves <pedro@codesourcery.com>
10935 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
10937 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
10939 * thread.c (thread_command): Move call to annotate_thread_changed
10941 (do_captured_thread_select): ... here, to avoid printing an
10942 annotation if the thread change generates an exception.
10944 2009-01-16 Joel Brobecker <brobecker@adacore.com>
10946 * NEWS: Document x86_64/MinGW as a new native configuration.
10948 2009-01-16 Joel Brobecker <brobecker@adacore.com>
10950 * NEWS: Move the documentation of "info os processes" to
10951 the appropriate section (documenting the new commands).
10953 2009-01-15 Doug Evans <dje@google.com>
10955 * target.h (target_signal_to_string): Make return type const char *.
10956 (target_signal_to_name): Ditto.
10957 (target_signal_from_name): Make arg const char *.
10958 * infrun.c (sig_print_info): Update.
10959 * signals/signals.c (signals): Make array and struct members const.
10960 (target_signal_to_string): Make return type const char *.
10961 (target_signal_to_name): Ditto.
10962 (target_signal_from_name): Make arg const char *.
10964 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
10965 Tristan Gingold <gingold@adacore.com>
10967 * solist.h (struct target_so_ops): New member bfd_open.
10968 (solib_find): Add prototype.
10969 (solib_bfd_fopen): Add prototype.
10970 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
10971 from solib_bfd_open.
10972 (solib_bfd_open): Use ops->bfd_open override if present. Call
10973 solib_find and solib_bfd_open otherwise.
10975 * objfiles.h (OBJF_KEEPBFD): New define.
10976 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
10977 objfile flag is set.
10978 * solib.c (symbol_add_stub): Do not allocate second BFD for
10979 shared library; use OBJF_KEEPBFD flag on solib objfile.
10981 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
10983 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
10985 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
10987 * value.h (address_of_variable): Add prototype.
10988 (locate_var_value): Remove prototype.
10990 * findvar.c (read_var_value): Do not attempt to default frame
10992 (locate_var_value): Remove function.
10993 * valops.c (value_of_variable): Retrieve selected frame for
10994 symbols that require a frame when called with NULL block.
10995 * valops.c (address_of_variable): New function.
10997 * eval.c (evaluate_subexp_for_address): Call address_of_variable
10998 instead of calling locate_var_value.
10999 (evaluate_subexp_with_coercion): Likewise.
11001 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
11003 * NEWS: Document "define" for prefixed commands.
11004 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
11005 show_user_1 for prefix commands.
11006 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
11007 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
11008 commands. Return the containing command list.
11009 (define_command, document_command): Update to handle prefix commands.
11010 (show_user_1): Add prefix and name arguments. Handle prefix
11012 * cli/cli-script.h (show_user_1): Update prototype.
11014 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
11016 * ser-mingw.c (console_select_thread): Add return to make
11018 (pipe_select_thread): Likewise.
11019 (file_select_thread): Likewise.
11021 2009-01-14 Pedro Alves <pedro@codesourcery.com>
11023 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
11026 2009-01-14 Pedro Alves <pedro@codesourcery.com>
11028 * remote.c (extended_remote_mourn_1): Invalidate our notion of
11029 current general thread.
11031 2009-01-14 Pedro Alves <pedro@codesourcery.com>
11033 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
11034 without a live selected thread.
11036 2009-01-14 Joel Brobecker <brobecker@adacore.com>
11038 Update the copyright notice of some of the files I missed
11039 in the previous copyright update.
11041 2009-01-14 Joel Brobecker <brobecker@adacore.com>
11043 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
11044 base address instead of casting it to DWORD.
11046 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
11048 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
11049 for NULL frame pointers.
11051 2009-01-13 Mark Kettenis <kettenis@gnu.org>
11053 * utils.c (host_address_to_string): Reimplement in a way that
11054 avoids the cast of the address to long.
11056 2009-01-13 Joel Brobecker <brobecker@adacore.com>
11058 * mdebugread.c (parse_symbol): Save the symbol private data
11059 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
11060 (psymtab_to_symtab_1): Likewise.
11061 (parse_procedure): Declare variable "e" only in the scope
11062 where it is used. Extract the symbol private data using
11063 SYMBOL_VALUE_BYTES.
11065 2009-01-13 Jim Blandy <jimb@codesourcery.com>
11067 Abstract out common code for copying value locations.
11069 * value.h (set_value_component_location): New declaration.
11070 * value.c (set_value_component_location): New function.
11071 (value_primitive_field): Use it.
11072 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
11073 * valops.c (search_struct_field, value_slice): Same.
11074 * ada-lang.c (coerce_unspec_val_to_type)
11075 (ada_value_primitive_packed_val): Same.
11077 2009-01-13 Joel Brobecker <brobecker@adacore.com>
11079 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
11081 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
11083 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
11085 * i386-cygwin-tdep.c: Ditto.
11086 * i386-windows-nat.c: Ditto.
11087 * windows-nat.h: Ditto.
11088 * windows-tdep.c: Ditto.
11089 * windows-tdep.h: Ditto.
11090 * windows-nat.c: Ditto.
11091 (cygwin_load_start): Redefine as CORE_ADDR.
11092 (cygwin_load_end): Ditto.
11093 (windows_make_so): Coerce result of address arithmetic to uintptr_t
11094 before coercing to CORE_ADDR to avoid a compiler warning.
11095 (handle_exception): Define addr as CORE_ADDR and coerce
11096 ExceptionAddress to uintptr_t before assigining to avoid a compiler
11098 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
11101 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
11103 Fix linking with --enable-targets=all:
11104 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
11105 (HFILES_NO_SRCDIR): Add windows-tdep.h.
11106 (ALLDEPFILES): Add windows-tdep.c.
11108 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
11110 * win32-nat.h: Delete.
11111 * windows-nat.h: Rename from win32-nat.h.
11112 * win32-nat.c: Delete.
11113 * windows-nat.c: Rename from win32-nat.c.
11114 * win32-termcap.c: Delete.
11115 * windows-termcap.c: Rename from win32-termcap.c.
11116 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
11117 * configure.ac: Handle rename from win32-termcap.c ->
11119 * configure: Regenerate.
11120 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
11121 -> windows-termcap.c.
11122 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
11124 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
11125 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
11127 (win32_make_so): Handle cygwin compiler warning due to change of
11128 load_addr from DWORD to LPVOID.
11129 (handle_load_dll): Use %p in format string to properly print address
11130 and avoid a compiler warning.
11131 (DEBUG_EXCEPTION_SIMPLE): Ditto.
11132 (handle_exception): Ditto.
11133 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
11134 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
11136 * config/i386/mingw.mh: Ditto.
11137 * config/i386/mingw64.mh: Ditto.
11139 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
11141 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
11142 arrayprint_recurse_level to a parameter. Update all the callers. New
11143 comment at autovariables.
11145 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
11147 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
11150 2009-01-11 Joel Brobecker <brobecker@adacore.com>
11152 * target.c (target_xfer_partial): Use host_address_to_string to
11153 print the address of readbuf and writebuf. Cast the address of
11154 elements inside the myaddr buffer into intptr_t.
11155 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
11156 Cast the address of elements inside the myaddr buffer into
11159 2009-01-11 Joel Brobecker <brobecker@adacore.com>
11161 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
11162 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
11163 * configure.host, configure.tgt: Add handling for x86_64/windows.
11164 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
11165 and amd64-windows-tdep.c.
11167 2009-01-11 Joel Brobecker <brobecker@adacore.com>
11169 * win32-tdep.h, win32-tdep.c: New files.
11170 * i386-cygwin-tdep.h: Delete.
11171 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
11172 i386-cygwin-tdep.h.
11173 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
11174 * win32-nat.c: Likewise.
11175 * configure.tgt: Add win32-tdep.o to the list of target object
11176 files for i386-cygwin and i386-mingw targets.
11178 2009-01-11 Joel Brobecker <brobecker@adacore.com>
11180 * win32-nat.h: New file.
11181 * win32-nat.c (mappings): Initialize to NULL.
11182 (win32_set_context_register_offsets): New function.
11183 * i386-windows-nat.c: New file.
11184 (mappings): Moved here from win32-nat.c.
11185 (_initialize_i386_windows_nat): New function.
11186 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
11187 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
11189 2009-01-09 Andreas Schwab <schwab@suse.de>
11191 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
11193 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
11195 * gdbtypes.c (append_composite_type_field): Correct the location of
11198 2009-01-09 Pedro Alves <pedro@codesourcery.com>
11200 * defs.h (deprecated_error_hook): Delete declaration.
11201 * interps.c (clear_interpreter_hooks): Adjust.
11202 * remote-sim.c (gdb_os_error): Don't try to call
11203 deprecated_error_hook. No need to call exit anymore.
11204 * top.c (deprecated_error_hook): Delete.
11206 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11208 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
11209 to print the address of the gdbarch pointer.
11211 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11213 * gdbarch.sh: Fix all the compilation errors on amd64-windows
11214 due to casting a pointer to a long when printing a function
11215 address. Instead, use host_address_to_string to convert our
11216 address to a string.
11217 * gdbarch.c: Regenerate.
11219 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11221 * event-top.c (async_disconnect, async_stop_sig): use "raise"
11222 instead of "kill" to raise a signal.
11224 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11226 * win32-nat.c (get_module_name): Change the type of parameter
11227 "base_address" to LPVOID. Remove unnecessary cast.
11228 (struct lm_info): Change type of load_addr to LPVOID.
11229 (win32_make_so): Change the type of parameter "load_addr"
11230 to LPVOID. Remove some unnecessary casts.
11231 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
11232 (win32_xfer_shared_libraries): Add missing cast.
11234 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11236 * win32-nat.c (has_detach_ability, set_process_privilege):
11237 Cast the result of GetProcAddress to (void *) to avoid
11238 a compilation warning.
11240 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11242 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
11245 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11247 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
11248 definition of local variable "done".
11249 (info_w32_command, handle_exception): Remove unnecessary cast.
11251 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11253 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
11254 DebugSetProcessKillOnExit. Update all uses in this file.
11255 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
11256 Update all uses in this file.
11258 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11260 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
11261 and use it when pushing the target.
11262 (win32_attach, win32_create_inferior): Update call to
11263 do_initial_win32_stuff.
11264 (win32_detach, win32_mourn_inferior): Use our ops parameter
11265 instead of the global win32_ops to unpush the target.
11267 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11269 * ser-mingw.c (ser_windows_open): Use proper type when casting
11270 in call to _open_osfhandle.
11272 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
11274 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
11276 2009-01-09 Joel Brobecker <brobecker@adacore.com>
11278 * CONTRIBUTE: Minor reformatting.
11280 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
11282 * MAINTAINERS: Add myself to Write After Approval.
11283 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
11286 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
11288 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
11289 Call exit to make it obvious to GCC.
11291 2009-01-08 Tom Tromey <tromey@redhat.com>
11293 PR breakpoints/9350:
11294 * varobj.c (varobj_invalidate): Unconditionally free
11296 * symfile.c (syms_from_objfile): Free local_addr when returning
11298 * exec.c (exec_file_attach): Do cleanups before returning.
11299 (exec_file_command): Likewise.
11300 * corefile.c (reopen_exec_file): Do cleanups before returning.
11301 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
11303 (do_vec_free): New function.
11304 (update_global_location_list): Make a cleanup for old_locations.
11305 Do cleanups before returning. Remove unused variable 'e'.
11306 (find_condition_and_thread): Free result of parsing the
11308 (print_it_typical): Do cleanups before returning.
11309 (breakpoint_re_set_one): Always free sals.sals.
11311 2009-01-08 Joel Brobecker <brobecker@adacore.com>
11312 Emi Suzuki <emi-suzuki@tjsys.co.jp>
11314 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
11317 2009-01-07 Doug Evans <dje@google.com>
11319 * top.c (gdb_prompt_string): Delete, unused.
11321 2009-01-07 Pedro Alves <pedro@codesourcery.com>
11323 Delete ONE_PROCESS_WRITETEXT leftovers.
11325 * breakpoint.c (insert_bp_location): Delete process_warning
11327 (insert_breakpoint_locations): Adjust.
11328 (reattach_breakpoints): Adjust.
11329 * infrun.c (normal_stop): Drop "It might be running in another
11332 2009-01-07 Stan Shebs <stan@codesourcery.com>
11334 * config/pa/linux.mh (XDEPFILES): Remove.
11336 2009-01-07 Doug Evans <dje@google.com>
11338 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
11340 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
11342 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
11343 spacing, a regression from 2008-04-22.
11345 2009-01-07 Joel Brobecker <brobecker@adacore.com>
11347 * utils.c (gdb_print_host_address): Adjust implementation to
11348 reuse host_address_to_string. Move comment explaining the conversion
11349 from host address to string from here...
11350 (host_address_to_string): ... to there.
11352 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
11354 * MAINTAINERS: Add myself for write after approval privileges.
11356 2009-01-06 Tom Tromey <tromey@redhat.com>
11358 * value.c (set_internalvar): Use value_free, not xfree.
11360 2009-01-06 Jim Blandy <jimb@red-bean.com>
11362 Check return values of functions declared with warn_unused_result
11363 attribute in GLIBC 2.8.
11364 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
11365 * inflow.c (check_syscall): New function.
11366 (new_tty): Use check_syscall to check return values from open and dup.
11367 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
11368 * main.c (captured_main): Call cwd after setting up gdb_stderr;
11369 check for errors from getcwd.
11370 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
11371 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
11372 (stdio_file_fputs): Same.
11373 * utils.c (internal_vproblem): abort if last-ditch error message
11376 * top.c (gdb_init): Don't set the current directory here; that's
11377 already been done in captured_main.
11379 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
11381 * ser-tcp.c: Adjust includes.
11382 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
11383 (tcp_auto_retry, tcp_retry_limit): Declare.
11384 (TIMEOUT): Remove, in favor of tcp_retry_limit.
11385 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
11386 (wait_for_connect): New function.
11387 (net_open): Use it. Add auto-retry logic.
11388 (set_tcp_cmd, show_tcp_cmd): New functions.
11389 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
11390 and "set/show tcp connect-timeout" commands.
11391 * NEWS: Document new commands.
11393 2009-01-05 Tom Tromey <tromey@redhat.com>
11395 * python/python-internal.h (Py_ssize_t): Define as int.
11397 2009-01-05 Jim Blandy <jimb@red-bean.com>
11399 * MAINTAINERS: Fix my e-mail address as steering committee member.
11401 2009-01-03 Joel Brobecker <brobecker@adacore.com>
11403 Updated copyright notices for most files.
11405 2009-01-03 Joel Brobecker <brobecker@adacore.com>
11407 * top.c (print_gdb_version): Update copyright year.
11409 2009-01-03 Joel Brobecker <brobecker@adacore.com>
11411 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
11413 2009-01-01 Pedro Alves <pedro@codesourcery.com>
11415 PR breakpoints/9681:
11416 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
11417 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
11418 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
11419 retrow all other exceptions.
11421 For older changes see ChangeLog-2008.
11427 version-control: never