* TODO: Remove "Watchpoints seem not entirely reliable, though
[external/binutils.git] / gdb / ChangeLog
1 Tue Nov  8 13:20:14 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2
3         * TODO: Remove "Watchpoints seem not entirely reliable, though
4         they haven't failed me recently." item--this old (4.6 at least)
5         item is too vague to be useful (some watchpoint bugs have been
6         fixed since then).
7         * TODO: Add explanation of "RPC interface" item.
8
9 Mon Nov  7 22:25:21 1994  Jeff Law  (law@snake.cs.utah.edu)
10
11         * hppa-tdep.c (read_unwind_info): Use "text_offset" for linker
12         stub unwind descriptors too.
13
14         * Enable backtracing from inside a SOM shared library back into
15         user code.
16         * hppa-tdep.c (internalize_unwinds): Accept and use new
17         "text_offset" argument for dynamic relocation of
18         region_{start,end} fields in the unwind descriptor.
19         (read_unwind_info): Pass text_offset to internalize unwinds.
20
21 Mon Nov  7 14:34:42 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
22
23         * m3-nat.c: Remove comments about arbitrary limit in
24         printf_filtered; that limit is gone.
25
26 Mon Nov  7 00:27:16 1994  Jeff Law  (law@snake.cs.utah.edu)
27
28         * Beginnings of SOM shared library support.  Breakpoints and
29         single frame backtracing within the library only.  Only works when
30         using the HPUX 9 dynamic linker.  More functionality to be added
31         soon.
32
33         * somsolib.c, somsolib.h: New files.
34         * Makefile.in (HFILES_NO_SRCDIR): Add somsolib.h
35         (ALLDEPFILES): Add somsolib.c.
36         (somsolib.o): Add some dependencies.
37         * somread.c (som_symtab_read): Accept multiple section offsets.
38         All callers changed.  Adjust all text symbols with the first
39         section offset.
40         * symfile.c (find_lowest_section): Enable this function.  Add some
41         tie-breaking logic when sections have the same vma.
42         (syms_from_objfile): Use find_lowest_section rather than looking
43         for ".text" by name.  Relax warning to only warn if the lowest
44         section is not a code section.
45         * config/pa/{hppabsd.mh, hppahpux.mh} (NATDEPFILES): Add somsolib.o
46         * config/pa/{nm-hppab.h, nm-hppah.h}: Include somsolib.h.
47         
48 Sun Nov  6 12:54:54 1994  Jeff Law  (law@snake.cs.utah.edu)
49
50         * partial-stab.h (N_TEXT): Put back GDB_TARGET_IS_HPPA kludge,
51         it is still needed for GCC-2.6 compiled code.
52         * TODO (GDB_TARGET_IS_HPPA): Note this kludge can be nuked
53         sometime after GCC-2.7 has been released.
54
55         * hppa-tdep.c (frame_saved_pc): Mask off low two bits when
56         retrieving the PC from a signal handler caller.  Fix thinko
57         in Stan's last change ("frame", should have been "frame->next").
58         If the next frame is a signal handler caller and it's a system
59         call which has entered the kernel ((PSW & 0x2) != 0), then the
60         saved pc is in %r2 instead of %r31.
61         
62 Fri Nov  4 23:47:07 1994  Jeff Law  (law@snake.cs.utah.edu)
63
64         * hppa-tdep.c (hppa_frame_find_saved_regs): Change "frame" to
65         "frame_info" throughout.
66
67 Fri Nov  4 16:26:59 1994  Kung Hsu  (kung@mexican.cygnus.com)
68
69         * sparcl-stub.c: get rid of defs.h.
70
71 Fri Nov  4 13:11:54 1994  Jim Kingdon  <kingdon@deneb.cygnus.com>
72
73         * gdbserver/Makefile.in (MMALLOC_CFLAGS): Add -I${MMALLOC_DIR}.
74         Correct definition of MMALLOC_DIR to reflect fact this is
75         gdb/gdbserver/Makefile.in, not gdb/Makefile.in.
76
77         * gdbserver/server.c (main): After we kill the inferior in
78         response to a 'k' request, exit.
79
80         * remote.c (remote_kill): Use catch_errors when calling putpkt.
81         (putpkt): Return int, not void, to match catch_errors calling
82         convention.
83
84 Fri Nov  4 10:52:38 1994  Stan Shebs  (shebs@andros.cygnus.com)
85
86         * rs6000-tdep.c (pop_frame): Correct a variable name.
87
88 Fri Nov  4 05:43:35 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
89
90         * TODO: Re-write item about SIGINT handling to reflect the fact
91         that target_stop now exists.
92
93 Thu Nov  3 15:19:17 1994  Stan Shebs  (shebs@andros.cygnus.com)
94
95         Replace useless FRAME, FRAME_ADDR types with struct frame_info *
96         and CORE_ADDR, respectively.
97         * frame.h (FRAME, FRAME_INFO_ID, FRAME_ADDR): Remove.
98         * blockframe.c (get_frame_info): Remove.
99         * a29k-tdep.c, alpha-tdep.c, blockframe.c, breakpoint.c,
100         breakpoint.h, energize.c, findvar.c, gdbtk.c, gould-pinsn.c,
101         h8300-tdep.c, h8500-tdep.c, hppa-tdep.c, i386-tdep.c, i960-tdep.c,
102         infcmd.c, inferior.h, infrun.c, m68k-tdep.c, m88k-tdep.c,
103         mips-tdep.c, nindy-tdep.c, printcmd.c, pyr-tdep.c, rs6000-tdep.c,
104         sh-tdep.c, sparc-tdep.c, stack.c, valops.c, z8k-tdep.c,
105         config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
106         config/gould/tm-pn.h, config/h8300/tm-h8300.h,
107         config/h8500/tm-h8500.h, config/mips/tm-mips.h,
108         config/ns32k/tm-merlin.h, config/ns32k/tm-umax.h,
109         config/pyr/tm-pyr.h, config/sparc/tm-sparc.h): Replace FRAME with
110         struct frame_info * everywhere, replace FRAME_ADDR with CORE_ADDR,
111         rename variables consistently (using `frame' or `fi'), remove
112         calls to get_frame_info and FRAME_INFO_ID, remove comments about
113         FRAME and FRAME_ADDR cruftiness.
114
115 Thu Nov  3 14:25:24 1994  Stu Grossman  (grossman@cygnus.com)
116
117         * corelow.c, exec.c, inftarg.c, m3-nat.c, op50-rom.c, procfs.c,
118         remote-adapt.c, remote-e7000.c, remote-eb.c, remote-es.c,
119         remote-hms.c, remote-mips.c, remote-mm.c, remote-mon.c,
120         remote-nindy.c, remote-os9k.c, remote-pa.c, remote-sim.c,
121         remote-st.c, remote-udi.c, remote-vx.c, remote-z8k.c, remote.c,
122         w89k-rom.c, target.c, target.h:  Add support for target_stop().
123         * gdbtk.c (gdb_stop):  Switch to target_stop().
124
125 Thu Nov  3 01:23:45 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
126
127         * osfsolib.c (solib_map_sections, first_link_map_member,
128         next_link_map_member, xfer_link_map_member):  Retrieve and use
129         shared library relocation offset from runtime loader structures.
130         Use libxproc.a routines to get a working version if
131         USE_LDR_ROUTINES is defined.
132         * README:  Remove item about shared library relocation for
133         Alpha OSF/1.
134
135 Wed Nov  2 15:05:39 1994  Kung Hsu  (kung@mexican.cygnus.com)
136
137         * c-exp.y (yylex): scan template names, and scan nested class
138         names.
139
140 Wed Nov  2 11:01:55 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
141
142         * nlm/Makefile.in: install gdbserve.nlm.
143
144 Tue Nov  1 16:41:12 1994  Stu Grossman  (grossman@cygnus.com)
145
146         * Makefile.in:  Use $(objdir)/tcl and $(objdir)/tk if they are
147         available.
148         * configure.in (ENABLE_CLIBS):  Use $(TCL) and $(TK) instead of
149         -ltcl and -ltk.
150         * gdbtk.c:  Get rid of lots of unnecessary #includes.
151         * (gdbtk_init):  Use ConnectionNumber macro instead of referencing
152         Display structure directly.
153         * gdbtk.tcl:  Change exit button to quit button.
154
155 Tue Nov  1 13:00:46 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
156
157         * c-valprint.c (c_value_print):  Check for plain literal `char'
158         target type when suppressing `(char *)' output for strings.
159
160 Mon Oct 31 19:19:51 1994  Stan Shebs  (shebs@andros.cygnus.com)
161
162         * coffread.c (coff_symfile_init): Remove unused local abfd.
163         * utils.c [NO_MMALLOC] (mmalloc, mrealloc): Define and use size_t
164         instead of long, for compatibility with mmalloc.h.
165
166 Sat Oct 29 02:40:40 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
167
168         * top.c (line_completion_function):  Renamed from
169         symbol_completion_function, takes the line buffer and the
170         point in the line buffer as additional arguments.
171         (readline_line_completion_function):  New function, interface
172         between readline and line_completion_function.
173         (init_main):  Use it.
174         (complete_command):  Use line_completion_function instead of
175         abusing rl_line_buffer. Free completion strings after printing
176         them.
177         * symtab.c (completion_list_add_name):  Recheck for duplicates
178         if we intend to add a modified symbol.
179
180         * gdbtypes.h (cplus_struct_type):  nfn_fields_total no longer
181         includes the number of methods from the baseclasses.
182         * stabsread.c (attach_fn_fields_to_type):  No longer add the
183         number of methods from the baseclasses to TYPE_NFN_FIELDS_TOTAL,
184         the baseclass type might not have been completely filled in yet.
185         * symtab.c (total_number_of_methods):  New function to compute
186         the total number of methods for a type, including the methods
187         from baseclasses.
188         (decode_line_1):  Use it instead of TYPE_NFN_FIELDS_TOTAL to
189         allocate the symbol array for find_methods.
190
191         * stabsread.c (scan_file_globals):  Add default case to minimal
192         symbol type switch, to avoid gcc -Wall warnings.
193
194         * config/rs6000/tm-rs6000.h (INIT_EXTRA_FRAME_INFO):
195         Don't test for zero backchain pointer to recognize a signal
196         handler frame, if read() gets interrupted by a signal, the
197         backchain will be non zero.
198         (SIG_FRAME_FP_OFFSET):  Move to here from rs6000-tdep.c,
199         improve comment.
200         (SIG_FRAME_PC_OFFSET):  New definition.
201         (FRAME_SAVED_PC):  Return saved pc from sigcontext if this
202         is a signal handler frame.
203         * rs6000-tdep.c (function_frame_info):  Do not error out
204         if we can't access the instructions.
205
206         * config/rs6000/tm-rs6000.h (CONVERT_FROM_FUNC_PTR_ADDR):
207         New definition to get the function address from a function pointer.
208         * valops.c (find_function_addr):  Use it when calling a user
209         function through a function pointer.
210
211 Fri Oct 28 16:16:52 1994  Stan Shebs  (shebs@andros.cygnus.com)
212
213         * Makefile.in (MMALLOC_DIR): New definition.
214         (MMALLOC): Use MMALLOC_DIR.
215         (MMALLOC_CFLAGS): Look in MMALLOC_DIR for mmalloc.h.
216         (OPCODES): Remove gratuitous "./".
217         * defs.h (mmalloc.h): Include.
218         (mmalloc, mrealloc, etc): Remove decls.
219         (cplus_demangle, cplus_demangle_opname): Remove decls.
220
221 Wed Oct 26 15:41:07 1994  Stu Grossman  (grossman@cygnus.com)
222
223         * defs.h, gdbtk.c, main.c, top.c:  Change sense and name of
224         no_windows variable.  Now called use_windows, and defaults to off
225         (for compatibility).
226
227 Wed Oct 26 12:20:53 1994  Jim Kingdon  <kingdon@cygnus.com>
228
229         * coffread.c (coff_symtab_read): If we get the address from
230         target_lookup_symbol, set the section to -2 not SECT_OFF_BSS.
231         (coff_symtab_read): Set value and section of symbol that
232         process_coff_symbol returns.
233
234 Tue Oct 25 09:53:04 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
235
236         * config/i386/tm-nbsd.h: Enable longjmp support.
237
238 Sat Oct 22 03:41:13 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
239
240         * valarith.c (value_binop):  Take care of ANSI `value preserving'
241         rule, which was not addressed by the previous change.
242
243         * rs6000-tdep.c (skip_prologue):  Handle `mr r31,r1', which is
244         generated by gcc-2.6, as a synonym for `oril r31,r1,0'.
245
246         * TODO:  Remove item about RS/6000 shared libraries.
247
248 Thu Oct 20 17:35:45 1994  Stu Grossman  (grossman@cygnus.com)
249
250         * defs.h, infrun.c (wait_for_inferior), top.c:  Call
251         target_wait_hook to allow GUI to handle blocking for inferior.  Call
252         call_command_hook in execute_command to provide means for wrapping
253         commands with GUI state change updates.
254         * gdbtk.c (gdb_cmd):  Force GUI into idle mode when errors occur.
255         * (gdb_stop):  New tcl command to stop the target process.
256         * (x_event, gdbtk_wait):  Allow GUI to interrupt gdb out of target
257         waits.
258         * (gdbtk_call_command):  Wrapper around command processing to
259         alert GUI of target state changes.
260         * (gdbtk_init):  Get the fd of X server for doing async
261         notification of X events (via x_event).  Setup new hooks.
262         * gdbtk.tcl:  Add scrollbars to assembly and command windows.
263         * Change window foreground & background colors.
264         * Create margin tag for breakpoints in source and assembly windows.
265         * Add new routines to be invoked when target state changes to/from
266         idle.
267         * Add start of expression window.
268         * Change bindings of mouse button 1 in assembly and source window
269         to just set or clear breakpoints when in the margin tag.
270         * Change shape of register window to be more vertical to better
271         reflect it's contents.
272         * Add stop button.
273         * Cleanup some code around command window bindings.
274
275         * infrun.c (wait_for_inferior):  Make sure
276         through_sigtramp_breakpoint is non-null before deleting.
277
278 Thu Oct 20 10:26:43 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
279
280         * config/powerpc/ppc-nw.mt (TDEPFILES): Removed exec.o.
281
282 Thu Oct 20 06:56:07 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
283
284         * Makefile.in (coffread.o): Depend on target.h.
285         (remote-vx.o): Depend on gdb-stabs.h objfiles.h symfile.h $(bfd_h).
286
287 Wed Oct 19 22:49:31 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
288
289         * TODO: Fix typo.
290
291 Wed Oct 19 11:32:15 1994  Jim Kingdon  <kingdon@cygnus.com>
292
293         * objfiles.c (objfile_relocate): When relocating ->sections, use
294         objfile not symfile_objfile.
295
296         * symtab.h, minsyms.c (minsyms_sort): New function.
297         * objfiles.c (objfile_relocate): Call it.
298
299         * remote-vx.c (vx_add_symbols): Call breakpoint_re_set.
300
301         * objfiles.c, objfiles.h (objfile_to_front): New function.
302         * remote-vx.c (vx_add_symbols): Call it.
303
304         * coffread.c (coff_symtab_read): Handle common symbols the same
305         way that partial-stab.h does.
306
307 Wed Oct 19 21:06:12 1994  Rob Savoye  (rob@cirdan.cygnus.com)
308
309         * hppa-tdep.c: Remove include files a.out.h, ioctl.h, and
310         machine/psl.h. These are host files.
311
312 Wed Oct 19 15:13:51 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
313
314         * objfiles.h (struct objfile): Fix comment--minimal_symbol_count
315         does *not* include the terminating NULL msymbol.
316
317 Tue Oct 18 20:53:29 1994  Rob Savoye  <rob@darkstar.cygnus.com>
318
319         * monitor.c (monitor_load_srec,monitor_make_srec): Add an asrecord
320         loader that reads files using BFD and converts it on the fly.
321
322 Mon Oct 17 18:52:06 1994  Rob Savoye  <rob@darkstar.cygnus.com>
323
324         * monitor.c (set_loadtype_command): Fixed so it doesn't core dump.
325         * monitor.c (monitor_load): check the load type and load the file
326         accordingly. Default to gr_load_image().
327         * monitor.c (monitor_load_ascii_srec): Load an ascii file in
328         srecord format by downloading to the monitor.
329         * w89k-rom.c, op50n-rom.c: set supported load types.
330
331 Mon Oct 17 10:29:08 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
332
333         * Makefile.in (ALLDEPFILES): Remove xcoffexec.c.
334         * Makefile.in: Remove xcoffexec.o rule.
335
336         * exec.c (exec_file_command): Add comment.
337
338         Fix data and bss relocation for VxWorks 5.1:
339         * remote-vx.c (vx_add_symbols): New function.
340         (vx_load_command, add_symbol_stub): Call it instead of
341         symbol_file_add.
342         (vx_wait): Remove comment which was wrong to useless.
343         * remote-vx.c: Reindent much of file.
344         * coffread.c (cs_to_section, find_targ_sec): New functions.
345         (process_coff_symbol): Set SYMBOL_SECTION to result
346         from cs_to_section.
347         (coff_symtab_read): Call cs_to_section and deal with result
348         rather than assuming sections are in a certain order.  Deal with
349         BSS.
350         * coffread.c: Remove text_bfd_scnum variable.
351
352 Sat Oct 15 16:55:48 1994  Stan Shebs  (shebs@andros.cygnus.com)
353
354         * corelow.c: Format to standard.
355         (core_close): Use name instead of bfd_filename.
356
357 Fri Oct 14 10:29:08 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
358
359         * exec.c (map_vmap): Cast return from xmalloc to its proper type,
360         not to PTR.
361
362         * symfile.c (reread_symbols): Include bfd_errmsg string in error
363         message if bfd_close fails.
364         * exec.c (exec_close), solib.c (clear_solib), corelow.c
365         (core_close), objfiles.c (free_objfile), irix5-nat.c
366         (clear_solib), osfsolib.c (clear_solib), remote-utils.c
367         (gr_load_image): Check for errors from bfd_close.
368         * solib.c (look_for_base), remote-utils.c (gr_load_image),
369         remote-udi.c (download), corelow.c (core_open), symfile.c
370         (symfile_bfd_open), symfile.c (generic_load): Add comment
371         regarding error from bfd_close.
372         * remote-udi.c (download), remote-utils.c (gr_load_image): Add
373         comment about bogus handling of errors from bfd_openr.
374         * exec.c (exec_close): Add comment regarding memory leak and
375         dangling reference to vp->name.
376
377 Sat Oct 15 03:43:00 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
378
379         * eval.c (evaluate_subexp):  Make fnptr a LONGEST instead
380         of using longest_to_int.
381
382         * infcmd.c (run_stack_dummy):  Reinstate set_current_frame call,
383         mips and alpha targets need the real breakpoint pc for
384         creating the breakpoint frame.
385
386         * stack.c (return_command):  Cast return value to the return
387         type of the function from which we return.
388         * values.c (set_return_value):  Pass VALUE_CONTENTS unmodified
389         to STORE_RETURN_VALUE.
390
391         * symtab.c (lookup_symbol):  Remove search for `static mangled
392         symbols', the search for `static symbols' already looks for
393         mangled and demangled symbols via lookup_block_symbol.
394
395         * valarith.c (value_binop):  Use ANSI C arithmetic conversions
396         when performing integral evaluations, implement BINOP_EQUAL and
397         BINOP_LESS.
398         (value_equal, value_less):  Use value_binop to perform the
399         comparison if both operands have TYPE_CODE_INT.
400
401         * rs6000-tdep.c (pop_frame):  Make sure all registers are valid,
402         as they are written back later. Handle sp restore for frameless
403         functions. Use fdata.nosavedpc instead of fdata.frameless to
404         determine if the pc has been saved.
405         (function_frame_info):  Handle `mr r31,r1', which is generated by
406         gcc-2.6, as a synonym for `oril r31,r1,0'.
407         (skip_trampoline_code):  Handle shared library trampolines.
408         * xcoffread.c (read_xcoff_symtabs):  Record XMC_GL symbols with
409         their real name. Enables setting of breakpoints in shared libraries
410         before the executable is run.
411
412 Fri Oct 14 19:39:47 1994  Rob Savoye  <rob@darkstar.cygnus.com>
413
414         * monitor.h, remote-mon.c: Hack up to so the old ROM monitor
415         interface code still works with the new ROM monitor
416         structures. Fake out a couple of fields.
417
418 Fri Oct 14 14:54:37 1994  Stan Shebs  (shebs@andros.cygnus.com)
419
420         * h8500-tdep.c (target_read_sp, target_write_sp, target_read_pc,
421         target_write_pc, target_read_fp, target_write_fp): Rename to
422         h8500_read_sp, etc.
423         (h8500_read_pc, h8500_write_pc): Add pid argument.
424         * config/h8500/tm-h8500.h (TARGET_READ_SP, TARGET_WRITE_SP,
425         TARGET_READ_PC, TARGET_WRITE_PC, TARGET_READ_FP, TARGET_WRITE_FP):
426         Change to match functions above.
427
428 Thu Oct 13 13:24:29 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
429
430         * NEWS: Add item about if and while.
431
432         * .gdbinit: Restore `end'; it was not excess.  Reindent
433         list-objfiles to make this clear.  Comment out all of
434         list-objfiles because old gdb's choke on it.
435
436 Wed Oct 12 23:19:08 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
437
438         * config/mips/tm-bigmips64.h: Just define TARGET_BYTE_ORDER and
439         include tm-mips64.h.
440
441 Wed Oct 12 18:02:17 1994  Stan Shebs  (shebs@andros.cygnus.com)
442
443         * Makefile.in (ANNOTATE_OBS): New definition.
444         (COMMON_OBS): Add exec.o.
445         (annotate.o): Remove extra compile rule.
446         * config/*/*.mh, config/*/*.mt: Remove exec.o from *DEPFILES lists
447         everywhere.
448
449         * .gdbinit: Remove excess `end'.
450
451         * exec.c: Merge in RS6000 support from xcoffexec.c.
452         (symfile.h, objfiles.h, xcoffsolib.h): Include.
453         (vmap): New global variable.
454         (exec_close): Close and free objects in vmap chain.
455         (exec_file_command) [IBM6000_TARGET]: Set up initial vmap.
456         (bfdsec_to_vmap, map_vmap): Moved here from xcoffexec.c.
457         (exec_files_info): Print vmap information.
458         * xcoffexec.c: Remove.
459         * config/rs6000/rs6000.mt, config/rs6000/rs6000lynx.mt
460         (TDEPFILES): Use exec.o instead of xcoffexec.o.
461         * TODO: Remove pertinent items.
462
463 Wed Oct 12 10:08:19 1994  Jeff Law  (law@snake.cs.utah.edu)
464
465         * partial-stab.h (N_TEXT): Delete GDB_TARGET_IS_HPPA kludge; they
466         are no longer needed as of gcc-2.6.0.
467
468 Tue Oct 11 15:51:01 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
469
470         * lynx-nat.c (child_wait): Correct handling of byte reversed SPARC
471         Lynx wait status.
472         (fetch_core_registers): Don't try to fetch a register if
473         regmap maps it to -1.
474         * sparc-tdep.c (sparc_frame_find_saved_regs): Use FRAME_SAVED_I0
475         and FRAME_SAVED_L0 when setting saved_regs_addr.  SPARC Lynx
476         stores the registers in a weird order.
477
478 Sat Oct  8 20:59:13 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
479
480         * blockframe.c (reinit_frame_cache): Reinstate select_frame call
481         if inferior_pid is nonzero.
482
483 Sat Oct  8 04:27:21 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
484
485         Speed up GDB startup time by not demangling partial symbols.
486         * symfile.h (ADD_PSYMBOL_VT_TO_LIST),
487         symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list):
488         No longer demangle partial symbols.
489         * symtab.c (lookup_symbol, list_symbols): Handle mangled
490         variables, e.g. C++ static members, via the minimal symbols.
491
492         Handle reordered functions in an objfile, for Irix 5.2 shared
493         libraries.
494         * objfiles.h (OBJF_REORDERED):  New bit in the objfile flags,
495         set if the functions in an objfile are reordered.
496         * mdebugread.c (parse_partial_symbols):  Detect reordered
497         functions in an objfile.
498         * symtab.c (find_pc_psymtab, find_pc_symtab):  Use expensive
499         lookup algorithm if the functions in the objfile are reordered.
500
501         * xcoffexec.c (exec_close):  If the current target has a copy
502         of the exec_ops sections, reflect the freeing of the sections
503         in current_target.
504
505         * valops.c (call_function_by_hand):  Use `sizeof dummy1', not
506         `sizeof dummy', for constructing the call dummy code.
507
508         * config/sparc/tm-sparc.h:  Add PARAMS declarations to all
509         function declarations.
510         * sparc-tdep.c (sparc_pop_frame):  Cast result of
511         read_memory_integer to CORE_ADDR when passing it to PC_ADJUST.
512
513         * irix5-nat.c (enable_break):  Set breakpoint at the entry point
514         of the executable, to handle the case where main resides in a
515         shared library.
516         * irix5-nat.c (solib_create_inferior_hook):  Reset stop_soon_quietly
517         after shared library symbol reading, to get rid of a warning from
518         heuristic_proc_start if the startup code has no symbolic debug info.
519
520         * breakpoint.h (struct breakpoint):  Add new fields language
521         and input_radix, to enable breakpoint resetting with the
522         proper language and radix.
523         * breakpoint.c (set_raw_breakpoint):  Initialize them.
524         (breakpoint_re_set_one):  Use them when resetting the breakpoint.
525         (breakpoint_re_set):  Preserve current language and input_radix
526         across breakpoint_re_set_one calls.
527
528         * symtab.c (decode_line_1):  Do not build a canonical line
529         specification for `*expr' line specifications.
530
531         * breakpoint.h (bpstat_stop_status):  Fix prototype declaration.
532
533 Fri Oct  7 08:48:18 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
534
535         The point of these changes is to avoid reading the frame pointer
536         and stack pointer during stepping, to speed things up.
537         A.  Changes to not select a frame until we need a selected frame:
538             * blockframe.c (flush_cached_frames): Call select_frame (NULL, -1).
539             * infrun.c (wait_for_inferior): Move call to select_frame back to
540             normal_stop.  This reverts a change of 13 Apr 94 (it says Jeff
541             Law, but the change was my idea); the only reason for that change
542             was so we could save and restore the selected frame in
543             wait_for_inferior, and now that flush_cached frames clears the
544             selected frame, that should work OK now.
545         B.  Changes to not create a current_frame until we need one:
546             * blockframe.c (get_current_frame): If current_frame is NULL, try
547             to create an innermost frame.
548             * sparc-tdep.c (sparc_pop_frame), infcmd.c (run-stack_dummy),
549             infrun.c (wait_for_inferior), thread.c (thread_switch),
550             convex-tdep.c (set_thread_command), a29k-tdep.c (pop_frame),
551             alpha-tdep.c (alpha_pop_frame), convex-xdep.c (core_file_command),
552             h8300-tdep.c (h8300_pop_frame), h8500-tdep.c (h8300_pop_frame),
553             hppa-tdep.c (hppa_pop_frame), i386-tdep.c (i386_pop_frame),
554             i960-tdep.c (pop_frame), m68k-tdep.c
555             (m68k_pop_frame), mips-tdep.c (mips_pop_frame), rs6000-tdep.c
556             (push_dummy_frame, pop_dummy_frame, pop_frame), sh-tdep.c
557             (pop_frame), config/arm/tm-arm.h (POP_FRAME),
558             config/convex/tm-convex.h (POP_FRAME), config/gould/tm-pn.h
559             (POP_FRAME), config/ns32k/tm-merlin.h (POP_FRAME),
560             config/ns32k/tm-umax.h (POP_FRAME), config/tahoe/tm-tahoe.h
561             (POP_FRAME), config/vax/tm-vax.h (POP_FRAME): Don't
562             call create_new_frame.
563             * corelow.c (core_open), altos-xdep.c (core_file_command),
564             arm-xdep.c (core_file_command), gould-xdep.c (core_file_command),
565             m3-nat.c (select_thread), sun386-nat.c (core_file_command),
566             umax-xdep.c (core_file_command): Don't call create_new_frame; do
567             call flush_cached_frames.
568             * blockframe.c (reinit_frame_cache): Don't call create_new_frame
569             or select_frame.
570         C.  Changes to get rid of stop_frame_address and instead only
571         fetch the frame pointer when we need it.
572             * breakpoint.c (bpstat_stop_status): Remove argument
573             frame_address; use FRAME_FP (get_current_frame ()).
574             * infrun.c (wait_for_inferior): Don't pass frame pointer to
575             bpstat_stop_status.
576             * infrun.c (wait_for_inferior): Use FRAME_FP (get_current_frame
577             ()) instead of stop_frame_address.
578             * infrun.c (save_inferior_status, restore_inferior_status),
579             inferior.h (struct inferior_status): Don't save and restore
580             stop_frame_address.
581             * inferior.h, infcmd.c, thread.c (thread_switch), m3-nat.c
582             (select_thread): Remove stop_frame_address and uses thereof.
583         D.  Same thing for the stack pointer.
584             * infrun.c (wait_for_inferior): Remove stop_sp and replace
585             uses thereof with read_sp ().
586         E.  Change to eliminate one nasty little spot where we were
587         wanting to know the frame pointer from before the current step
588         (idea from GDB 3.5, which saved my ass, because my other ideas of
589         how to fix it were very baroque).
590             * infrun.c: Remove prev_frame_address.
591             * infrun.c (wait_for_inferior, step_over_function): Use
592             step_frame_address instead of prev_frame_address.
593         F.  Same basic idea for the stack pointer.
594             * inferior.h, infcmd.c: New variable step_sp.
595             * infcmd.c (step_1, until_next_command): Set it.
596             * infrun.c: Remove prev_sp and replace uses by step_sp.
597             * infrun.c (wait_for_inferior): If we get out of the step
598             range, then set step_sp to the current stack pointer before we
599             start going again.
600
601 Fri Oct  7 12:17:17 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
602
603         * top.c (target_byte_order_auto): New static variable.
604         (set_endian): Mention that ``auto'' is permitted.
605         (set_endian_auto): New static function.
606         (show_endian): Change message based on target_byte_order_auto.
607         (set_endian_from_file): New function.
608         (init_main): Add command ``auto'' to endianlist.
609         * exec.c (exec_file_command): Call set_endian_from_file.
610         * defs.h (set_endian_from_file): Declare.
611
612 Thu Oct  6 18:10:41 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
613
614         * nlm/i386.c (flush_i_cache): New function, does nothing.
615         (frame_to_registers, registers_to_frame, set_step_traps,
616         clear_step_traps, do_status): Make non-static.
617
618 Thu Oct  6 12:26:42 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
619
620         * config/mips/tm-mips.h (GDB_TARGET_IS_MIPS64): If not already
621         defined, define as 0.
622         (FIX_CALL_DUMMY): Rewrite to remove presumption that host and
623         target are similar.
624         * config/mips/tm-idt.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
625         * config/mips/tm-idtl.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
626         * config/mips/tm-idt64.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
627         (BREAKPOINT): Remove definition.
628         * config/mips/tm-idtl64.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
629         (BREAKPOINT): Remove definition.
630         * config/mips/tm-mips64.h (GDB_TARGET_IS_MIPS64): Define with a
631         value of 1, rather than without a value.
632         * config/mips/tm-bigmips64.h (GDB_TARGET_IS_MIPS64): Likewise.
633         * mips-tdep.c: Rewrite uses of GDB_TARGET_IS_MIPS64 to switch at
634         run time rather than at compile time.
635
636         * remote-mips.c (break_insn): Remove.
637         (BREAK_INSN, BREAK_INSN_SIZE): Define.
638         (mips_insert_breakpoint): Use BREAK_INSN, not break_insn.
639         (mips_remove_breakpoint): Likewise.
640
641         * defs.h: If TARGET_BYTE_ORDER_SELECTABLE is defined by tm.h,
642         define TARGET_BYTE_ORDER as target_byte_order, and declare
643         target_byte_order as an extern int, and define BITS_BIG_ENDIAN as
644         a test of TARGET_BYTE_ORDER.
645         * top.c: Several additions if TARGET_BYTE_ORDER_SELECTABLE is
646         defined:
647         (endianlist, target_byte_order): New variables.
648         (set_endian, set_endian_big, set_endian_little): New functions.
649         (show_endian): New function.
650         (init_cmd_lists): Initialize endianlist.
651         (init_main): Add commands ``set endian big'', ``set endian
652         little'', and ``show endian''.
653         * a29k-pinsn.c: Rewrite uses of TARGET_BYTE_ORDER and
654         BITS_BIG_ENDIAN to switch at run time rather than at compile time.
655         * coffread.c, dwarfread.c, findvar.c, mips-tdep.c: Likewise.
656         * remote-os9k.c, stabsread.c, valarith.c, valprint.c: Likewise.
657         * values.c: Likewise.
658
659 Wed Oct  5 11:41:24 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
660
661         * nlm/configure.in: ${gdb_host_cpu} defaults to ${host_cpu}.
662
663         * nlm/Makefile.in: Get rid of NWINCLUDES.
664         * config/{alpha,powerpc}/gdbserve.mt: Remove NWINCLUDES.
665           User should now configure with --with-headers.
666
667 Mon Oct  3 07:48:34 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
668
669         * gdbserver/server.c (main): Silently accept all unrecognized
670         requests and send back a zero length acknowledge.  That is what
671         *-stub.c do and is what remote.c expects.
672
673 Mon Oct  3 05:11:47 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
674
675         * corelow.c (core_open):  Copy the modified to_sections_end
676         vector from current_target to core_ops too.
677
678         * gdbserver/server.c (main):  Silently accept query requests
679         and send back a zero length acknowledge.
680
681 Fri Sep 30 17:17:21 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
682
683         * nlm/Makefile.in: Don't define NWINCLUDES.
684         * config/{alpha,powerpc}/gdbserve.mt: define NWINCLUDES.
685
686 Fri Sep 30 15:59:55 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
687
688         * gdbserver/low-lynx.c (create_inferior): Pass all 4 args to ptrace.
689
690 Fri Sep 30 06:42:42 1994  Ian Lance Taylor  (ian@cygnus.com)
691
692         * lynx-nat.c (child_wait): Use status.w_status, not status, in
693         arithmetic.  status is a `union wait'.
694
695         * config/nm-lynx.h (PTRACE_ARG3_TYPE): Define to int, not char *.
696
697         * lynx-nat.c (child_wait): Pass fourth argument to ptrace.
698
699 Thu Sep 29 08:22:27 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
700
701         * xcoffread.c (read_xcoff_symtab): Fix comment for yesterday's change.
702
703 Wed Sep 28 17:48:18 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
704
705         * coffread.c (complete_symtab): If last_source_file is set upon
706         entry, free it.
707
708 Wed Sep 28 08:59:14 1994  Jim Kingdon  (kingdon@cygnus.com)
709
710         * xcoffread.c (read_xcoff_symtab, case C_FILE):
711         Set main_aux before using it.
712
713         * xcoffexec.c (exec_close): If quitting, don't call clear_symtab_users.
714
715         * xcoffread.c (read_xcoff_symtab): Process XTY_LD symbols we were
716         ignoring before.  But continue to ignore XMC_DS.
717
718 Mon Sep 26 02:59:00 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
719
720         * defs.h (misc_command_type):  Remove trailing comma from
721         enumerator list.
722
723 Sun Sep 25 23:19:58 1994  Jeff Law  (law@snake.cs.utah.edu)
724
725         * hppa-tdep.c (frame_saved_pc): Fix thinko in code to dig saved pc
726         out of an interrupt frame.
727
728 Sun Sep 25 12:50:17 1994  Stan Shebs  (shebs@andros.cygnus.com)
729
730         * infcmd.c (do_registers_info) [INVALID_FLOAT]: Only use if
731         defined.
732         * values.c (unpack_double) [INVALID_FLOAT]: Ditto.
733         * mips-tdep.c (mips_print_register): Don't test float validity.
734         * config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
735         config/arm/tm-arm.h, config/convex/tm-convex.h,
736         config/h8300/tm-h8300.h, config/h8500/tm-h8500.h,
737         config/i386/tm-i386v.h, config/i386/tm-sun386.h,
738         config/i960/tm-i960.h, config/m68k/tm-m68k.h,
739         config/m88k/tm-m88k.h, config/mips/tm-mips.h,
740         config/ns32k/tm-merlin.h, config/ns32k/tm-nbsd.h,
741         config/ns32k/tm-ns32km3.h, config/ns32k/tm-umax.h,
742         config/pa/tm-hppa.h, config/pyr/tm-pyr.h,
743         config/rs6000/tm-rs6000.h, config/sh/tm-sh.h,
744         config/sparc/tm-sparc.h, config/z8k/tm-z8k.h (INVALID_FLOAT):
745         Remove definition.
746
747 Sun Sep 25 06:07:37 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
748
749         * TODO: Remove item about adding general multi-threaded stuff;
750         this is done.
751         Remove item about specifying arbitrary locations of stack frames
752         (this works on some machines).
753         Remove item about debugging functions without a frame pointer
754         (this works on some machines).
755         Remove item about re-writing macros which handle frame chaining and
756         frameless functions.  They have been re-written at least once
757         since that item was written.
758         Remove item about gdb catching SIGINT when attached; this is done.
759         Remove item about having list_command not read symbols--why bother?
760
761 Sat Sep 24 17:40:10 1994  Stan Shebs  (shebs@andros.cygnus.com)
762
763         * TODO: Append contents of Projects file.
764         * Projects: Remove.
765
766 Sat Sep 24 01:47:25 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
767
768         * corelow.c (add_solib_stub):  Remove copying of to_sections,
769         pass current_target to SOLIB_ADD. The Sep 10 change failed
770         if SOLIB_ADD errored out, or if SOLIB_ADD was trying to access
771         target memory.
772         * corelow.c (core_open):  After reading the shared libraries,
773         copy the modified to_sections vector from current_target to
774         core_ops, so that core_close can free it later.
775         * config/rs6000/nm-rs6000.h, rs6000-nat.c (xcoff_relocate_core):
776         Pass down target parameter from SOLIB_ADD and use it instead of
777         directly accessing core_ops.
778
779 Fri Sep 23 14:58:49 1994  J.T. Conklin  (jtc@rtl.cygnus.com)
780
781         * solib.c: *BSD systems need <a.out.h> to be included before
782           <link.h>.
783
784         * i386b-nat.c: Add i386_float_info(), etc.
785         * config/i386/nm-nbsd.h: #define FLOAT_INFO.
786
787         * config/nm-nbsd.h: New file, for generic NetBSD native support.
788         * config/i386/nm-nbsd.h: Use it.
789         * config/sparc/nm-nbsd.h: Use it.
790         * config/ns32k/nm-nbsd.h: Use it.
791
792         * configure.in (i386-*-netbsd): Use config/i386/nbsd.m[ht].
793           (ns32k-*-netbsd): Use config/ns32k/nbsd.m[ht].
794         * config/i386/{nbsd.mh,nbsd.mt,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h}:
795           New files, support for NetBSD/i386.
796         * config/ns32k/{nbsd.mh,nbsd.mh,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h}:
797           New files, support for NetBSD/ns32k.
798
799 Tue Sep 20 11:34:27 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
800
801         * .gdbinit: Add list-objfiles command.
802
803         * TODO: Reword item regarding NO_STD_REGS.
804
805         * coffread.c (record_minimal_symbol, coff_read_enum_type,
806         coff_read_struct_type): Allocate on symbol_obstack, not directly
807         via malloc/savestring.
808
809 Tue Sep 20 15:42:02 1994  Stan Shebs  (shebs@andros.cygnus.com)
810
811         * TODO: Add more items.
812         * tests: Remove the directory and all of its (obsolete) contents.
813
814 Tue Sep 20 11:34:27 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
815
816         * coffread.c (init_stringtab): When copying length to stringtab,
817         use target format, not host format, since that is what the rest of
818         the code assumes.
819
820 Mon Sep 19 15:48:10 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
821
822         * Makefile.in: Removed prelude.o, i386-nlmstub.o, nlmstub.o,
823           nlmstub.nlm, and nlmstub targets.  Removed NWSOURCE and
824           NWINCLUDES definitions.
825         * i386-nlmstub.c: Removed.
826
827 Mon Sep 19 07:48:36 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
828
829         * dbxread.c (read_dbx_dynamic_symtab): Cast bfd_asymbol_name to
830         char * (from const char *) before assigning.  Don't save string we
831         pass to record_minimal_symbol (it already saves it).
832
833 Sat Sep 17 17:05:14 1994  Stu Grossman  (grossman@cygnus.com)
834
835         * gdbtk.tcl:  Let ^U delete lines in the command window.
836
837 Sat Sep 17 02:26:58 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
838
839         * cp-valprint.c (static_field_print):  New variable, controls
840         printing of static members.
841         (_initialize_cp_valprint):  New print set subcommand
842         "static-members". Turn on printing of static members by default.
843         (cp_print_value_fields):  Print static members if necessary.
844
845         * solib.c:  Remove inclusion of libelf.h and elf/mips.h.
846         (elf_locate_base):  Use only standard BFD functions to collect
847         information about the .dynamic section. Check for DT_MIPS_RLD_MAP
848         tag only if it got defined via the inclusion of <link.h>.
849
850         * f-exp.y:  Write block for OP_VAR_VALUE.
851         * f-valprint.c (info_common_command):  Handle `info common'
852         without an argument correctly.
853
854         * c-typeprint.c (c_type_print_base):  Handle template constructors.
855         * symtab.c (gdb_mangle_name):  Handle template method mangling,
856         get rid of GCC_MANGLE_BUG code, which only applied to gcc-2.2.2.
857
858 Fri Sep 16 16:06:08 1994  Per Bothner  (bothner@kalessin.cygnus.com)
859
860         * gdbtypes.h (TYPE_INDEX_TYPE):  New macro.
861         * ch-typeprint.c, ch-valprint.c:  Use TYPE_INDEX_TYPE.
862         * ch-valprint.c (chill_val_print):  Pass index type directly
863         (instead of its TYPE_TARGET_TYPE) to print_type_scalar.
864         * stabsread.c (read_type):  Don't set TYPE_FLAG_TARGET_STUB
865         if the index type is a stub.
866
867 Fri Sep 16 17:18:44 1994  Stan Shebs  (shebs@andros.cygnus.com)
868
869         * config/i386/{i386aix.mh, i386bsd.mh, i386lynx.mh, i386sco.mh,
870         i386sco4.mh, i386sol2.mh, i386v.mh, i386v32.mh, i386v4.mh,
871         ncr3000.mh, ptx.mh, ptx4.mh}, config/m68k/{altos.mh, apollo68v.mh,
872         delta68.mh, dpx2.mh, hp300bsd.mh, hp300hpux.mh, m68klynx.mh,
873         m68kv4.mh}, config/m88k/{delta88.mh, delta88v4.mh},
874         config/mips/riscos.mh, config/pa/hppahpux.mh,
875         config/rs6000/rs6000lynx.mh, config/sparc/{sparclynx.mh,
876         sun4sol2.mh}, config/tahoe/tahoe.mh, config/vax/{vaxbsd.mh,
877         vaxult.mh, vaxult2.mh} (REGEX, REGEX1, SYSV_DEFINE): No longer
878         define.
879         * config/i386/i386sco4.mh (MUNCH_DEFINE): No longer define.
880
881 Fri Sep 16 15:40:34 1994  Stu Grossman  (grossman@cygnus.com)
882
883         * defs.h (QUIT):  Call interactive_hook to allow GUI to interrupt.
884         Also, add decl for symtab_to_filename.
885         * gdbtk.c:  Replace calls to full_filename with symtab_to_filename.  
886         * gdbtk.tcl:  New routine pc_to_line replaces in line code.  New
887         routine decr replaces in line code.
888         * (create_file_win):  Use catch to handle open failures more
889         elegantly.  Also, create special window to display file open
890         failure message.  Move opening of file prior to creation of text
891         widget.
892         * (create_asm_win):  Add PC as argument.  We now base disassembly
893         on PC instead of function name, since function names can be
894         ambiguous (usually seen with shared libs).  Also, use catch to
895         simplify code where we don't care about failures.
896         * source.c (symtab_to_filename):  New.  Returns the file
897         associated with a symtab.
898         * top.c:  Define interactive_hook.  Called during QUIT to animate
899         the GUI.
900
901 Fri Sep 16 00:14:40 1994  Per Bothner  (bothner@kalessin.cygnus.com)
902
903         * stabsread.c (read_type):  Handle stub types for bitstrings.
904         * stabsread.c (read_array_type):  Check for stub domain type
905         using TYPE_FLAG_STUB, not its length.
906         * gdbtypes.c (create_set_type):  Handle a stub domain type.
907
908         * ch-exp.y:  Get rid of some extra non-terminals, and move
909         their rules into primitive_value.
910         * parser-defs.h:  Add comment about unary postfix operators.
911         * ch-lang.c (chill_op_print_tab):  Add '->', postfix and prefix.
912         * expprint.c (print_subexp):  Recognize unary postfix operator.
913
914 Wed Sep 14 18:27:42 1994  Jason Molenda  (crash@phydeaux.cygnus.com)
915
916         * remote-hms.c: use remote_debug instead of hms_silent toggle.
917         Add warnings about depreciation of `snoop' cmd.
918
919 Wed Sep 14 18:18:58 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
920
921         * remote-hms.c (hms_read_inferior_memory):  Cope when
922         target sends both \r and \n.
923
924 Wed Sep 14 17:14:57 1994  Stan Shebs  (shebs@andros.cygnus.com)
925
926         * remote-mips.c (mips_error): Place NORETURN macro correctly.
927         * TODO: Add item about START_INFERIOR_TRAPS_EXPECTED.
928
929 Wed Sep 14 14:26:21 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
930
931         * xcoffread.c (read_xcoff_symtab): Fix obsolete comment about
932         mst_solib_trampoline.
933
934         * f-valprint.c (f_val_print): Change cast of valaddr from
935         CORE_ADDR * to char **, since that is how it is used.
936
937         * dbxread.c (read_dbx_dynamic_symtab): Save copy of symbol names
938         using obsavestring, and pass that to prim_record_minimal_symbol.
939         Having the objfile point to bfd_asymbol_name directly doesn't work
940         if we save and restore a mapped symbol file.
941
942 Wed Sep 14 00:55:26 1994  Stu Grossman  (grossman@cygnus.com)
943
944         * gdbtk.tcl:  Add ref counts to breakpoint tags.
945         * Put quotes around function name in disassemble command to better
946         handle assembler names containing `.'.
947         * Make pclist element 0 be filler to avoid off-by-one problem with
948         line numbers.
949         * Set names of top-level windows.
950         * Add register display window.
951         * Add PC to label of assembly window.
952
953 Tue Sep 13 18:23:26 1994  Rob Savoye  (rob@darkstar.cygnus.com)
954
955         * w89k-rom.c, op50-rom.c, monitor.c, config/pa/hppapro.mt: New files
956         to add a generic ROM monitor interface, and support file for the
957         WinBond W89K and the Oki OP50N PA based target boards.
958
959 Tue Sep 13 08:59:04 1994  Stu Grossman  (grossman@cygnus.com)
960
961         * gdbtk.c (gdbtk_flush gdbtk_fputs):  Buffer up output to make
962         disassembly more efficient.
963         * (breakpoint_notify):  Include pc in gdbtk_tcl_breakpoint
964         callback.
965         * (gdb_loc):  Include pc in return value.  Also, return function
966         name if arg was specified.
967         * (gdb_cmd_stub):  Call gdb_flush to drain internal GDB buffers
968         after command completes.
969         * (gdbtk_init):  Improve error handling.
970
971         * gdbtk.tcl:  Add lots of comments.  Clean up code.
972         * (gdbtk_tcl_fputs):  Make output window redirectable.
973         * Add assembly window, and breapoint support.
974         * Make button 1 in margin toggle breakpoints.
975         * Use stippling to indicate breakpoint disabling.
976
977 Sun Sep 11 22:34:57 1994  Jeff Law  (law@snake.cs.utah.edu)
978
979         * config/pa/tm-hppa.h (REGISTER_NAMES): Use r26-r23 for arg0-arg3.
980
981 Sun Sep 11 04:36:47 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
982
983         * irix5-nat.c, osfsolib.c, solib.c (solib_add):  Simplify last
984         change by replacing `symbols_added' with `so_last'.
985         * mdebugread.c (parse_external, parse_partial_symbols):  Ignore
986         global common symbols, they will be resolved by the runtime loader.
987         * mdebugread.c (parse_symbol, parse_partial_symbols, cross_ref):
988         Handle scSCommon like scCommon symbols.
989
990 Sat Sep 10 01:43:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
991
992         * corelow.c (add_solib_stub):  Copy to_sections changes from
993         core_ops to current_target after adding the shared libraries.
994         * partial-stab.h (N_EXCL), dbxread.c (add_old_header_file,
995         find_corresponding_bincl_psymtab):  Change `repeated header not seen'
996         error to a complaint, simplify complaint.
997         * procfs.c (signalname, errnoname):  Make `name' const.
998         * symfile.c (reread_symbols):  Use filename from old BFD to
999         reopen the objfile.
1000         * values.c (record_latest_value):  Don't record value in the
1001         history chain until we are sure there won't be an error.
1002
1003 Fri Sep  9 15:52:09 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
1004
1005         * nlm/Makefile.in: remove MMALLOC, READLINE, TERMCAP, and other
1006           cruft.
1007
1008         * config/i386/gdbserve.mt: New file, defs for i386 nlm stub.
1009
1010 Thu Sep  8 17:14:43 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
1011
1012         * remote.c (fromhex): Make error more explicit.
1013         (read_frame): Don't print bad checksum information unless
1014         remote_debugging.  Don't use repeat count unless it's > 0.
1015         * remote-e7000.c (expect): When echoing, ignore multiple newlines.
1016         (e7000_insert_breakpoint, e7000_remove_breakpoint, target_ops):
1017         Optionally cope with BC style breakpoints.  
1018         (e7000_command):  After command send directly to the E7000 mark
1019         registers as changed. 
1020         (why_stop, e7000_wait: Understand BC style stop condition.
1021         * sh-tdep.c (sh_skip_prologue):  Understand more complicated
1022         sequences.  (frame_find_saved_regs): Likewise.
1023         * config/h8500/tm-h8500.h (target_write_pc, TARGET_WRITE_PC):
1024         Handle extra arg.
1025         * config/i386/xm-go32.h (GDBINIT_FILENAME): Set to gdb.ini.
1026         (more work here to come)
1027         * config/sh/tm-sh.h (EXTRA_FRAME_INFO): Add f_offset and leaf_function
1028         fields.
1029
1030 Thu Sep  8 16:15:34 1994  J.T. Conklin  (jtc@rtl.cygnus.com)
1031
1032         * sparclite/Makefile.in: Assorted stuff needed for eload.
1033
1034         * sparclite/eload.c: Merge in command line argument parsing and
1035           error message handling improvements orignally made to aload.c.
1036
1037 Wed Sep  7 23:24:50 1994  Jeff Law  (law@snake.cs.utah.edu)
1038
1039         * defs.h (enum misc_command_type, command_control_type): Enums
1040         for describing the command and control types.
1041         (struct command_line): Add new fields to keep track of the command
1042         type and body associated with the command.
1043         * top.c: Include value.h.  Delete whitespace at the end of lines.
1044         (build_command_line, get_command_line): New functions.
1045         (execute_control_command, while_command, if_command): Likewise.
1046         (realloc_body_list, read_next_line): Likewise.
1047         (recurse_read_control_structure): Likewise.
1048         (execute_user_command): Call execute_control_command.
1049         (read_command_lines): Simplify by calling read_next_line, call
1050         read_control_structure for "if" and "while" commands.
1051         (free_command_lines): Free new fields in the command structure.
1052         (define_command): Reset control_level to zero.
1053         (init_main): Install command handlers for "if" and "while" commands.
1054
1055 Tue Sep  6 16:24:07 1994  Stan Shebs  (shebs@andros.cygnus.com)
1056
1057          * c-typeprint.c (c_type_print_varspec_prefix,
1058          c_type_print_varspec_suffix): Add cases for Fortran type codes.
1059          * eval.c (evaluate_subexp): For OP_ARRAY expressions in Fortran,
1060          call f77_value_literal_string instead.
1061          * f_exp.y: Include <string.h>, move include of parser-defs.h.
1062          (parse_number): Translate 'd' floats to 'e' so atof() works. 
1063          (yylex): Remove unused variables.
1064          * f-lang.c: Include <string.h>.
1065          (get_bf_for_fcn): Remove unused variable.
1066          * f-typeprint.c (f_type_print_varspec_prefix,
1067          f_type_print_varspec_suffix): Remove unused
1068          variables, add cases to switch statements.
1069          (f_type_print_base): Remove unused variables.
1070          * f-valprint.c (gdbcore.h, command.h): Include.
1071          (f77_get_dynamic_lowerbound, f77_get_dynamic_upperbound):
1072          Call read_memory_integer with correct number of arguments.
1073          (f77_get_dynamic_upperbound): Call f77_get_dynamic_lowerbound
1074          with correct argument type.
1075          (f77_print_array): Removed unused array array_size_array.
1076          (f_val_print): Don't use a CORE_ADDR as a char *.
1077          * valops.c (value_cast): Handle COMPLEX and BOOL types.
1078          (value_assign): Handle Fortran literal string and complex values.
1079          (f77_cast_into_complex, f77_assign_from_literal_string,
1080          f77_assign_from_literal_complex): New functions.
1081
1082 Mon Sep  5 14:46:41 1994  Per Bothner  (bothner@kalessin.cygnus.com)
1083
1084         * ch-typeprint.c (chill_type_print_base):  Make TYPE_CODE_RANGE
1085         case more robust.
1086
1087 Sun Sep  4 16:06:34 1994  Stan Shebs  (shebs@andros.cygnus.com)
1088
1089         * i960-tdep.c (signal.h): Don't include.
1090
1091         * cxux-nat.c (target_is_m88110): Remove definition.
1092
1093         * configure.in (config/nm-empty.h): If cross only, use instead
1094         of config/nm-trash.h.
1095         * config/nm-trash.h: Remove.
1096         * config/nm-empty.h: New file.
1097         * config/i386/nm-m3.h: New file, includes config/nm-m3.h.
1098         * config/mips/nm-m3.h: New file, includes config/nm-m3.h.
1099         * config/m68k/nm-sysv4.h: New file, includes config/nm-sysv4.h.
1100         * config/mips/nm-sysv4.h: New file, includes config/nm-sysv4.h.
1101         * config/sparc/nm-sysv4.h: New file, includes config/nm-sysv4.h.
1102
1103 Fri Sep  2 19:11:40 1994  Stu Grossman  (grossman@cygnus.com)
1104
1105         * configure.in: Don't symlink to gdbtk.tcl if it's already there.
1106
1107 Fri Sep  2 17:35:55 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
1108
1109         * configure.in: No longer look for nm, tm, and xm headers in
1110           config/<header>; they are always in config/<cpu>/<header>.
1111
1112 Fri Sep  2 16:40:03 1994  Stan Shebs  (shebs@andros.cygnus.com)
1113
1114         * objfiles.c (allocate_objfile): Add the newly-created objfile to
1115         the end of the list of objfiles, instead of at the beginning.
1116
1117         * xcoffread.c (allocate_include_entry): New function, abstracted
1118         from code in record_include_begin.
1119         (record_include_begin, record_include_end): Call it.
1120
1121         * blockframe.c (reinit_frame_cache): Test inferior_pid instead of
1122         target_has_stack to decide whether to create a real stack frame
1123         for the cache.
1124
1125         * coffread.c (process_coff_symbol) [CXUX_TARGET]: Ignore vendor
1126         section.
1127         * config/m88k/tm-cxux.h (CXUX_TARGET): Define.
1128
1129         * h8300-tdep.c: Include "dis-asm.h" instead of <dis-asm.h>.
1130
1131 Fri Sep  2 09:51:46 1994  J.T. Conklin  (jtc@cygnus.com)
1132
1133         * config/sparc/tm-nbsd.h: Add #defines to map NetBSD struct and
1134           field names into what is expected by sparc-nat.c.
1135
1136 Thu Sep  1 17:32:54 1994  Per Bothner  (bothner@kalessin.cygnus.com)
1137
1138         * c-typeprint.c (c_typedef_print):  Add missing Chill support.
1139
1140 Thu Sep  1 15:41:21 1994  Stu Grossman  (grossman@cygnus.com)
1141
1142         * rs6000-pinsn.c (print_insn):  Use powerpc disassembler when
1143         doing Power PC.
1144         * config/powerpc/tm-ppc-nw.h:  Define GDB_TARGET_POWERPC.
1145
1146         * config/i386/i386lynx.mh, config/m68k/m68klynx.mh,
1147         config/rs6000/rs6000lynx.mh, config/sparc/sparclynx.mh:  Enable
1148         ser-tcp.
1149
1150         * nlm/Makefile.in:  Get rid of NWSOURCE.
1151         * nlm/alpha-io.S (inVti, outVti):  Remove extraneous ldha's.
1152         * nlm/gdbserve.o:  Add dummy __main routine.
1153         * nlm/gdbserve.def:  Turn on debug.
1154
1155 Thu Sep  1 12:36:39 1994  Jim Kingdon  (kingdon@cygnus.com)
1156
1157         * config/xm-nbsd.h: Don't define SET_STACK_LIMIT_HUGE; it is obsolete.
1158
1159 Thu Sep  1 11:01:40 1994  J.T. Conklin  (jtc@rtl.cygnus.com)
1160
1161         * config/tm-nbsd.h: New file, support for all NetBSD targets.
1162         * config/xm-nbsd.h: fix typo.
1163         * config/sparc/{nm,tm,xm}-nbsd.h: New files, renamed from
1164           {nm,tm,xm}-sparcnbsd.h to conform to prefered file naming
1165           conventions.
1166         * configure.in: (sparc-*-netbsd): use config/sparc/nbsd.m[ht].
1167
1168 Wed Aug 31 14:40:33 1994  Jason Molenda (crash@phydeaux.cygnus.com)
1169
1170         * remote-udi.c (udi_read_inferior_memory,udi_write_inferior_memory): 
1171         change typeo in error msg (`inferrior' -> `inferior').
1172
1173 Wed Aug 31 09:17:02 1994  Jim Kingdon  (kingdon@cygnus.com)
1174
1175         * inflow.c (set_sigint_trap, clear_sigint_trap): Check for
1176         attach_flag (this check was performed by the callers).  Also check
1177         inferior_thisrun_terminal.
1178         * inftarg.c (child_wait), lynx-nat.c (child_wait),
1179         procfs.c (wait_fd), symm-nat.c (child_wait): Don't check
1180         attach_flag in deciding whether to call set_sigint_trap and
1181         clear_sigint_trap. 
1182
1183         * value.h (struct value): Change literal_data from PTR to char *,
1184         since that is the way it is used.
1185
1186 Tue Aug 30 21:56:54 1994  Jeff Law  (law@snake.cs.utah.edu)
1187
1188         * somread.c (som_symfile_read): Force unwinds to be re-read after
1189         reading in a new partial symbol table.
1190
1191 Tue Aug 30 13:14:16 1994  Stan Shebs  (shebs@andros.cygnus.com)
1192
1193         * config/h8500/tm-8500.h (DONT_USE_REMOTE): Remove definition,
1194         an obsolete conditional.
1195         * config/pa/tm-hppa.h (BREAKPOINT) [KERNELDEBUG]: Remove use,
1196         an obsolete conditional.
1197         * config/rs6000/rs6000.mh, config/rs6000/rs6000.mt: Clean up
1198         comments.
1199
1200 Mon Aug 29 14:39:42 1994  Stan Shebs  (shebs@andros.cygnus.com)
1201
1202         * Makefile.in (ns32k-opcode.h): Remove reference.
1203         (ns32k-pinsn.o): Update dependencies.
1204         * ns32k-opcode.h: Remove file.
1205         * ns32k-pinsn.c (print_insn): Call version in libopcodes, remove
1206         all other code in this file. 
1207
1208 Mon Aug 29 12:04:07 1994  Stu Grossman  (grossman@cygnus.com)
1209
1210         * nlm/configure.in:  Stop using cpu.c.  Put it in TDEPFILES instead.
1211         * config/alpha/gdbserve.mt (TDEPFILES):  Remove alpha-patch.o.
1212
1213         * nlm/Makefile.in:  Add rule for .S.o.
1214         * nlm/aio.h:  Protect from multiple inclusions.
1215         * nlm/alpha-io.S:  Remove everything we don't need.
1216         * nlm/{alpha-patch.c, alpha-patch.h, alpha-uart.c, alpha-uart.h}:
1217         Remove, no longer needed.
1218         * nlm/alpha.c:  Merge in lots of stuff from previous files.
1219         * nlm/alpha.h:  Don't #include alpha-patch.h.  Make
1220         breakpoint_insn extern.
1221         * Move stuff from alpha-patch.h into here.
1222
1223         * config/alpha/gdbserve.mt (TDEPFILES):  Get rid of alpha-uart.o.
1224
1225 Mon Aug 29 11:34:34 1994  Jim Kingdon  (kingdon@cygnus.com)
1226
1227         * annotate.c (annotate_starting): Flush output.
1228
1229 Sat Aug 27 23:32:43 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1230
1231         * symfile.c (symbol_file_add):  Move reinit_frame_cache call to
1232         the callers of symbol_file_add. Gets rid of heuristic fence-post
1233         warnings on mips and alpha targets when the PC resides in a shared
1234         library which is not yet read in.
1235         * coff-solib.c (coff_solib_add), cxux-nat.c (add_shared_symbol_files),
1236         irix5-nat.c (solib_add), osfsolib.c (solib_add),
1237         remote-vx.c (vx_open), solib.c (solib_add):
1238         Add call to reinit_frame_cache after all shared libraries are read in.
1239         * remote-udi.c (udi_load), remote-vx.c (vx_load_command),
1240         symfile.c (symbol_file_command, add_symbol_file_command):
1241         Add call to reinit_frame_cache after symbol_file_add.
1242
1243 Wed Aug 24 17:45:14 1994  J.T. Conklin  (jtc@cygnus.com)
1244
1245         * config/xm-nbsd.h: New file, support for all NetBSD ports.
1246         * config/sparc/{nm-sparcnbsd.h,tm-sparcnbsd.h,xm-sparcnbsd.h,
1247           sparcnbsd.mh,sparcnbsd.mt}: New files, support for NetBSD/sparc.
1248         * configure.in: Add sparc-*-netbsd target.
1249
1250 Wed Aug 24 13:17:34 1994  Stan Shebs  (shebs@andros.cygnus.com)
1251
1252         * remote-vx.c (vx_attach): Interpret the command argument as an
1253         unsigned long.
1254
1255 Wed Aug 24 13:08:08 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
1256
1257         * configure.in: Change i[34]86 to i[345]86.
1258         * nlm/configure.in: Likewise.
1259         * gdbserver/configure.in: Likewise.
1260
1261 Wed Aug 24 09:41:09 1994  J.T. Conklin  (jtc@cygnus.com)
1262
1263         * configure.in (i386-*-netware): Automatically configure nlm
1264           subdir.
1265
1266 Tue Aug 23 17:51:13 1994  J.T. Conklin  (jtc@cygnus.com)
1267
1268         * nlm/gdbserve.c: conditionalize header file inclusion for either
1269           NetWare 4.0 or PIN targets.
1270         * nlm/i386.c: include appropriate header files.
1271         * nlm/prelude.c: define TERMINATE_BY_UNLOAD for NetWare 4.0
1272           targets.
1273
1274 Tue Aug 23 16:54:16 1994  Stu Grossman  (grossman@cygnus.com)
1275
1276         * nlm/ppc.c (set_step_traps clear_step_traps):  Cleanups.
1277         * nlm/gdbserve.def:  Autoload clib.
1278
1279 Tue Aug 23 12:05:19 1994  Jim Kingdon  (kingdon@cygnus.com)
1280
1281         * breakpoint.c (condition_command): Call breakpoints_changed.
1282
1283         * gdbtypes.h: Declare f77_create_literal_string_type and
1284         f77_create_literal_complex_type.
1285         * valops.c (f77_value_literal_string, f77_value_substring,
1286         f77_value_literal_complex): Use xmalloc not malloc.
1287         * valops.c (f77_value_literal_string, f77_value_substring):
1288         Make addr char * not CORE_ADDR.
1289         * value.h (struct value): Add new field literal_data of aligner union.
1290         (VALUE_LITERAL_DATA): Use it.
1291         * f-lang.h: Declare find_common_for_function.
1292         * value.h, valops.c: Split VALUE_SUBSTRING_START into memaddr and
1293         myaddr fields of a union.  Don't overload it with the frame field
1294         (not sure this is necessary; I'm not sure what lval_* codes
1295         VALUE_SUBSTRING_* can be used with).
1296
1297 Mon Aug 22 11:45:01 1994  Stan Shebs  (shebs@andros.cygnus.com)
1298
1299         * config/a29k/{a29k-kern.mt,a29k-udi.mt,a29k.mt,ultra3.mh,
1300         ultra3.mt}: Clean up comments, remove no-longer-used definitions.
1301
1302         * rs6000-nat.c: Include libbfd.h again, needed until reference
1303         to bfd_cache_lookup is cleaned out.
1304
1305         * config/i386/linux.mh (XM_CLIBS): Add -lm.
1306
1307 Mon Aug 22 10:42:15 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
1308
1309         Work to reduce the interrupts-off duration when running in DOS.
1310         * ser-go32.c:  (dos_async_ready): See if anything is in the buffer.
1311         (dos_async_rx): rewrite to unpack as many characters from the
1312         asynctsr as possible into a local buffer.
1313         
1314 Fri Aug 19 14:55:45 1994  Stan Shebs  (shebs@andros.cygnus.com)
1315
1316         Initial Fortran language support, adapted from work by Farooq Butt
1317         (fmbutt@engage.sps.mot.com).
1318         * Makefile.in: Add Fortran-related files and dependencies.
1319         * defs.h (language_fortran): New language enum.
1320         * language.h (_LANG_fortran): Define.
1321         (MAX_FORTRAN_DIMS): Define.
1322         * expression.h: Reformat to standard.
1323         (MULTI_F77_SUBSCRIPT, OP_F77_UNDETERMINED_ARGLIST,
1324         OP_F77_LITERAL_COMPLEX, OP_F77_SUBSTR): New expression opcodes.
1325         * gdbtypes.h (TYPE_CODE_COMPLEX, TYPE_CODE_LITERAL_COMPLEX,
1326         TYPE_CODE_LITERAL_STRING): New type codes.
1327         (type): New fields upper_bound_type and lower_bound_type.
1328         (TYPE_ARRAY_UPPER_BOUND_TYPE, TYPE_ARRAY_LOWER_BOUND_TYPE,
1329         TYPE_ARRAY_UPPER_BOUND_VALUE, TYPE_ARRAY_LOWER_BOUND_VALUE): New
1330         macros.
1331         (builtin_type_f_character, etc): Declare.
1332         * value.h (VALUE_LITERAL_DATA, VALUE_SUBSTRING_START): Define.
1333         * f-exp.y: New file, Fortran expression grammar.
1334         * f-lang.c: New file, Fortran language support functions.
1335         * f-lang.h: New file, Fortran language support declarations.
1336         * f-typeprint.c: New file, Fortran type printing.
1337         * f-valprint.c: New file, Fortran value printing.
1338         * eval.c (evaluate_subexp): Add code for new expression opcodes,
1339         fix wording of error message.
1340         * gdbtypes.c (f77_create_literal_complex_type,
1341         f77_create_literal_string_type): New functions.
1342         * language.c (set_language_command): Add Fortran info.
1343         (calc_f77_array_dims): New function.
1344         * parse.c (length_of_subexp, prefixify_subexp): Add cases for new
1345         expression opcodes.
1346         * symfile.c (deduce_language_from_filename): Recognize .f and .F
1347         as Fortran source files.
1348         * valops.c (f77_value_literal_string, f77_value_substring,
1349         f77_value_literal_complex): New functions.
1350
1351 Fri Aug 19 13:35:01 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1352
1353         * c-typeprint.c (c_print_type):  Assume demangled arguments
1354         if a '(' is found in varstring, looking for ')' at the end of
1355         varstring did fail with demangled const member functions, which
1356         have a trailing `const'.
1357         * remote.c (get_offsets, putpkt):  Change to `char' buffers,
1358         to avoid errors when compiling with DEC c89.
1359         (remote_wait):  Cast to `char *' before passing buffer to
1360         fputs_filtered, to avoid errors when compiling with DEC c89.
1361         (remote_wait):  Do not return inferior_pid by default, this
1362         statement is never reached, which causes warnings from some
1363         compilers.
1364         * stabsread.c (scan_file_globals):  Ignore static minimal symbols.
1365         * symfile.c (load_command):  If called with no argument, try
1366         to get the filename from the executable file.
1367         (generic_load):  Remove check for NULL filename, it is done
1368         in load_command now.
1369
1370 Fri Aug 19 00:40:55 1994  Jeff Law  (law@snake.cs.utah.edu)
1371
1372         * hppa-tdep.c (skip_trampoline_code): Revert incorrect change
1373         from June 2, 1994 (what was I thinking?!?).  Fix it right this
1374         time.
1375
1376 Thu Aug 18 17:01:35 1994  J.T. Conklin  (jtc@rtl.cygnus.com)
1377
1378         * nlm/i386.c, nlm/i386.h: New files that contain i386 specific code.
1379
1380 Thu Aug 18 14:39:46 1994  Stan Shebs  (shebs@andros.cygnus.com)
1381
1382         * README: Grammar improvements, clarifications, updates.
1383
1384 Wed Aug 17 23:08:53 1994  Stu Grossman  (grossman@cygnus.com)
1385
1386         * Makefile.in (TARGET_FLAGS_TO_PASS):  Pass down LD_FOR_TARGET and
1387         NLMCONV_FOR_TARGET.  (SUBDIRS):  Add nlm target.
1388         * configure.in (powerpc-*-netware*):  Automatically configure nlm
1389         subdir.
1390         * nlm/Makefile.in:  Add {CC NLMCONV LD}_FOR_TARGET.  Remove alpha
1391         specific stuff.  Make things more configurable.
1392         * nlm/configure.in:  Add powerpc-*-netware* target.  Use
1393         gdbserve.mt/cpu.c/cpu.h for target stuff.  Get rid of tm/xm/nm.h
1394         files.
1395         * nlm/gdbserve.c:  Move Alpha specific stuff into other files.
1396         Remove lots of architecture-specific stuff.
1397         * nlm/gdbserve.def:  Add new imports.
1398         * nlm/ppc.c, nlm/ppc.h:  New files that contain PowerPC specific code.
1399         * nlm/prelude.c:  Don't include libhooks.h, get rid of call to
1400         register library.
1401         * nlm/prelude.o:  What was this doing here?
1402         * config/alpha/gdbserve.mt:  Defs for alpha nlm stub.
1403         * config/powerpc/gdbserve.mt: Defs for PowerPC nlm stub.
1404         * config/powerpc/ppc-nw.mt:  Defs for PowerPC target for GDB.
1405         * config/powerpc/tm-ppc-nw.h:  Ditto.
1406
1407         * nlmstub.def:  New file, contains imports for 386 nlm stub.
1408
1409 Wed Aug 17 23:17:33 1994  Rob Savoye  (rob@darkstar.cygnus.com)
1410
1411         * remote-pa.c: New file for HPPA embedded support. Currently it's
1412         a copy of remote.c.
1413         * config/pa/hppabsd.mt,hppahpux.mt,hppaosf.mt: User remote-pa.c.
1414
1415 Wed Aug 17 13:19:52 1994  Stan Shebs  (shebs@andros.cygnus.com)
1416
1417         * config/m68k/tm-delta68.h (EXTRACT_RETURN_VALUE,
1418         STORE_RETURN_VALUE): Define to use %a0 for pointers.
1419
1420 Wed Aug 17 07:43:06 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1421
1422         * remote-mips.c: Remove unused declaration of mips_load.
1423
1424 Tue Aug 16 16:45:34 1994  Stan Shebs  (shebs@andros.cygnus.com)
1425
1426         * coffread.c: General cleanup, and support for section offsets.
1427         (time.h, sys/types.h, libbfd.h): Don't include.
1428         (cur_src_start_addr, cur_src_end_addr): Rename to
1429         current_source_start_addr, current_source_end_addr.
1430         (nlist_stream_global): Remove.
1431         (nlist_bfd_global): New global variable.
1432         (coff_symfile_read): Remove code that gets and uses fileno()
1433         directly.
1434         (read_coff_symtab, enter_linenos, process_coff_symbol): Add
1435         section_offsets parameter, add text/data section offset to
1436         appropriate symbols' values.
1437         (read_one_sym): Use bfd_read instead of fread.
1438         (init_stringtab, init_lineno): Change first parameter to a bfd,
1439         use bfd routines instead of raw I/O.
1440
1441 Tue Aug 16 15:24:03 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1442
1443         * symtab.c (decode_line_1): If funfirstline and we get a
1444         non-LOC_BLOCK symbol (e.g. variable or type), then error().
1445
1446         * Makefile.in (TARFILES, NONSRC, SFILES_STAND, SFILES_KGDB):
1447         Remove; unused.
1448         (TAGFILES_NO_SRCDIR): Remove ALLPARAM.
1449         (HFILES_NO_SRCDIR): Remove all files in config sub-directory.
1450         (TAGS): Also pass result of find on config sub-directory to etags.
1451         (ALLPARAM): Remove; now unused.
1452
1453 Sun Aug 14 13:05:26 1994  Fred Fish  (fnf@cygnus.com)
1454
1455         * Makefile.in (VERSION):  Bump to 4.13.1
1456         * NEWS, README:  Update to match gdb 4.13 release version.
1457
1458 Sat Aug 13 08:22:50 1994  Fred Fish  (fnf@cygnus.com)
1459
1460         Harris CX/UX support, from Bob Rusk (rrusk@mail.csd.harris.com).
1461         * cxux-nat.c:  Remove dangling #else block.
1462         (m88k_harris_core_register_addr):  New function.
1463
1464         * environ.c (init_environ):  If no environment, do nothing.
1465
1466 Fri Aug 12 15:52:37 1994  Stu Grossman  (grossman@cygnus.com)
1467
1468         * remote.c (remote_wait):  Return inferior_pid instead of 0 for
1469         `W` message.
1470
1471 Fri Aug 12 11:47:10 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
1472
1473         * sparclite/aload.c (sys_error, error): Use vfprintf for variable
1474           argument lists.
1475
1476 Thu Aug 11 04:06:42 1994  Doug Evans  (dje@canuck.cygnus.com)
1477
1478         * defs.h (concat, basename, buildargv, freeargv, strerrno, strsigno,
1479         errno_max, signo_max, strtoerrno, strtosigno):  Delete.
1480         Include "libiberty.h" instead.
1481
1482 Wed Aug 10 13:23:47 1994  Rick Sladkey  (jrs@world.std.com)
1483
1484         * i386v-nat.c (i386_insert_nonaligned_watchpoint):
1485         add additional argument specifying raw address to permit
1486         proper release of debug registers.
1487         (i386_insert_watchpoint, i386_insert_aligned_watchpoint):
1488         change all callers.
1489
1490 Wed Aug 10 16:13:45 1994  Stu Grossman  (grossman@cygnus.com)
1491
1492         * defs.h, top.c:  Use `extern' in declarations of GUI hooks, and
1493         define them in top.c.  Add comments to the hooks.
1494
1495 Wed Aug 10 15:57:43 1994  Doug Evans  (dje@canuck.cygnus.com)
1496
1497         * remote-sim.c (gdbsim_ops): Set `to_insert_breakpoint' and
1498         `to_remove_breakpoint' fields.
1499
1500 Wed Aug 10 15:46:03 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1501
1502         * infcmd.c (run_command): Remove comment suggesting using
1503         target_has_execution instead of inferior_pid.
1504
1505 Wed Aug 10 10:33:20 1994  Kung Hsu  (kung@mexican.cygnus.com)
1506
1507         * remote-mips.c (mips_open): add code to handle baud rate.
1508
1509 Tue Aug  9 09:44:42 1994  Stu Grossman  (grossman@cygnus.com)
1510
1511         * infrun.c (wait_for_inferior):  Call target_resume() upon
1512         detection of new processes.
1513
1514         * procfs.c (create_procinfo):  Return pointer to new procinfo
1515         structure.
1516         * (do_detach):  Spacing & formatting cleanup.
1517         * (procfs_wait):  Move wait_again label to ensure that we really
1518         wait again.  On exit from fork, release new child from gdbs'
1519         clutches.
1520         * (procfs_set_sproc_trap):  Enable trapping of fork and vfork.
1521
1522 Mon Aug  8 15:09:32 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
1523
1524         * i386-nlmstub.c (handle_exception): Wait until the thread has
1525           been started before killing the NLM by pointing the PC at
1526           _exit().
1527
1528 Sat Aug  6 22:27:30 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1529
1530         * config/mips/tm-irix5.h (IN_SIGTRAMP):  Redefine for Irix 5,
1531         Irix 5 has a standard _sigtramp signal handler.
1532         * irix5-nat.c (solib_add):  Get rid of sigtramp_address handling,
1533         it is not needed for a standard _sigtramp signal handler.
1534         Add shared library sections to the section table of the target
1535         before adding the symbols.
1536         * mips-tdep.c (mips_skip_prologue):  Do not skip load immediate
1537         instructions that do not prepare a stack adjustment.
1538         * regex.c (SIGN_EXTEND_CHAR):  Update to emacs-19.25 definition,
1539         which does the right thing on machines where `char' is unsigned.
1540
1541 Fri Aug  5 17:50:59 1994  Stu Grossman  (grossman@cygnus.com)
1542
1543         * remote.c (remote_open):  Move setting of inferior_pid prior to
1544         call to remote_start_remote.  Also use unique value for pid to
1545         avoid confusion with read_register_pid & friends.
1546         * (remote_wait):  Return inferior_pid instead of 0 in all cases.
1547
1548 Fri Aug  5 12:23:02 1994  Stan Shebs  (shebs@andros.cygnus.com)
1549
1550         * dwarfread.c (bfd.h): Don't include.
1551
1552 Fri Aug  5 09:08:34 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
1553
1554         * i386-nlmstub.c (handle_exception): Point the PC at _exit() to
1555           kill the program being debugged.  KillMe(), the undocumented
1556           call intended for this purpose, causes the server to hang.
1557
1558 Thu Aug  4 16:26:06 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
1559
1560         * remote.c (read_frame): Calculate run length encoded checksum
1561         correctly.
1562         * config/sh/stub.c: New file.
1563
1564 Thu Aug  4 14:34:12 1994  Stu Grossman  (grossman@cygnus.com)
1565
1566         * target.c (find_default_run_target):  Make sure to_can_run is set
1567         before calling it.
1568
1569 Thu Aug  4 11:46:27 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1570
1571         * TODO: Remove note about fast watchpoints and remove obsolete
1572         Mach stuff.
1573
1574 Thu Aug  4 11:08:03 1994  Stan Shebs  (shebs@andros.cygnus.com)
1575
1576         * config/i386/xm-i386v4.h, config/m68k/xm-m68kv4.h,
1577         config/sparc/xm-sun4sol2.h (NORETURN): Don't define.
1578         * config/m88k/tm-cxux.h (ARCH_NUM_REGS): Undefine before defining.
1579
1580 Thu Aug  4 10:26:36 1994  Stu Grossman  (grossman@rtl.cygnus.com)
1581
1582         * target.c (add_target):  Don't call clean_target on target
1583         vectors anymore.
1584         * (unpush_target):  Test for to_close being set before calling.
1585         * (target_xfer_memory, target_info):  Check for to_has_memory
1586         before playing with memory.
1587
1588         * remote.c (remote_open):  Set inferior_pid to make kill command
1589         happy.
1590         * inflow.c (kill_command):  Revert change of Aug 2.  Use
1591         inferior_pid to determine whether to print out "The program is not
1592         being run." message.
1593
1594 Thu Aug  4 07:55:04 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1595
1596         * config/i386/i386m3.mh (NAT_CLIBS): Add -lmachid and -lnetname.
1597         * m3-nat.c, config/nm-m3.h: #if 0 REQUEST_QUIT stuff.
1598         * m3-nat.c: Pass argument to return_to_top_level.
1599         Declare m3_kill_inferior before use.
1600         (port_chain_insert): In "can't happen" case, abort rather than
1601         setting `mid' to large decimal constant (which gcc warns about).
1602         (get_thread_name): Use cast to convert const char * to char *.
1603         (add_mach_specific_commands): #if 0 "thread break" command.
1604         (m3_trace_him): Call push_target.
1605         (mach_really_wait): New argument pid; remove unused
1606         variable pid.
1607         (intercept_exec_calls): Call target_terminal_init and
1608         target_terminal_inferior once the child execs.
1609         * infrun.c (proceed): Pass argument to PREPARE_TO_PROCEED.
1610
1611 Wed Aug  3 22:41:13 1994  Tom Lord  (lord@x1.cygnus.com)
1612
1613         * procfs.c (procfs_mourn_inferior): don't dereference the
1614         procinfo pointer after it has been freed.
1615
1616 Wed Aug  3 12:05:13 1994  Stan Shebs  (shebs@andros.cygnus.com)
1617
1618         * breakpoint.c (breakpoint_1): Improve pluralization in display
1619         of breakpoint hit counts.
1620
1621         * language.h (struct language_defn): Remove unused field
1622         la_longest_float.
1623         (longest_float): Remove, no longer used.
1624         * language.c (unknown_language_defn, auto_language_defn,
1625         local_language_defn): Remove init of la_longest_float field.
1626         * c-lang.c (c_language_defn, cplus_language_defn,
1627         asm_language_defn): Ditto.
1628         * ch-lang.c (chill_language_defn): Ditto.
1629         * m2-lang.c (m2_language_defn): Ditto.
1630
1631 Tue Aug  2 10:58:34 1994  Stan Shebs  (shebs@andros.cygnus.com)
1632
1633         * defs.h (bfd_read, bfd_seek): Remove declarations.
1634         * os9kread.c, rs6000-nat.c (libbfd.h): Don't include.
1635
1636 Tue Aug  2 09:50:50 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
1637
1638         * inflow.c (kill_command): Fix a bug which prevented target
1639           programs to be killed.
1640
1641 Mon Aug  1 18:48:47 1994  Stan Shebs  (shebs@andros.cygnus.com)
1642
1643         * defs.h: Change two-line declarations to one-line form.
1644         (NORETURN): Define as "volatile" only for older GCCs.
1645         (ATTR_NORETURN): Define for newer GCCs.
1646         * procfs.c (proc_init_failed): Add ATTR_NORETURN to declaration.
1647
1648 Mon Aug  1 16:43:24 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1649
1650         * breakpoint.c (mention), main.c (fputs_unfiltered): Add comments.
1651         * breakpoint.c (delete_breakpoint, enable_breakpoint,
1652         disable_breakpoint): Don't call breakpoints_changed; it is now
1653         called via the *_breakpoint_hook functions.
1654         * annotate.c (_initialize_annotate, breakpoint_changed): New functions.
1655
1656 Mon Aug  1 13:38:04 1994  Kung Hsu  (kung@mexican.cygnus.com)
1657
1658         * stabsread.c (read_type): Fix a bug in enum size calculation.
1659
1660 Mon Aug  1 01:36:13 1994  Jeff Law  (law@snake.cs.utah.edu)
1661
1662         * hppa-tdep.c (compare_unwind_entries): Add "const" to both
1663         argument types to shut up GCC.
1664
1665         * hppa-tdep.c (saved_pc_after_call): If the saved PC is in a
1666         linker stub, then return the address the stub will return to.
1667         (frame_saved_pc): Correctly restart the search for the saved
1668         pc when a linker stub is encountered.
1669
1670         * hppa-tdep.c (inst_saves_gr): Handle 16 and 8 bit instruction
1671         register stores emitted by the version 9 HP compilers.
1672         (inst_saves_fr): Relax test for a specific base register (%r1);
1673         this avoids losing with the version 9 HP compilers.
1674         (skip_prologue): Try to skip argument stores emitted by the HP
1675         compilers.  It's not perfect, but it's better than before.
1676
1677 Fri Jul 29 23:20:30 1994  Stu Grossman  (grossman@cygnus.com)
1678
1679         * findvar.c (write_pc write_pc_pid):  Remove casts to long when
1680         calling write_register_pid.
1681         * (write_register_pid):  Add prototype.
1682
1683 Fri Jul 29 21:56:23 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
1684
1685         * remote.c (read_frame):  Split readchar/checksum calculation into
1686         two parts since evaluation order is undefined.
1687
1688 Fri Jul 29 13:46:08 1994  Fred Fish  (fnf@cygnus.com)
1689
1690         From Kevin A. Buettner (kev@cujo.geg.mot.com).
1691         * Makefile.in (coredep.o):  Add inferior.h as dependency.
1692         * inflow.c:  Add F_SETOWN to list of defines to check
1693         around code that uses F_SETOWN.
1694
1695 Fri Jul 29 09:59:05 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
1696
1697         * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): If using newlib,
1698           set the -L and -B directory prefixes so we can link with it.
1699
1700 Thu Jul 28 14:37:36 1994  Stu Grossman  (grossman@cygnus.com)
1701
1702         * Makefile.in (INSTALLED_LIBS, CLIBS, DEPFILES):  Add support for
1703         --enable-xxx configure option by adding ENABLE_{CLIBS DEPFILES}
1704         where appropriate.
1705
1706         * General hackery to support alternate user-interface.
1707         * breakpoint.c (mention, delete_breakpoint, enable_breakpoint,
1708         disable_breakpoint):  Call hooks for alternate user-interface.
1709         * defs.h:  Add declarations for alternate user-interface hooks.
1710         * main.c (main):  Add --nw (and --nowindows) options to disable
1711         the GUI.
1712         * (near call to command_loop):  Call command_loop_hook if set.
1713         * (fputs_unfiltered):  Call fputs_unfiltered_hook if set.
1714         * stack.c:  Call print_frame_info_listing_hook if set.
1715         * top.c (gdb_init):  Initialize targets.c and utils.c prior to
1716         other files to make sure that calls to error and warning will
1717         work.  Call init_ui_hook after everything else.
1718         * utils.c (query):  Call query_hook if set.
1719         * (gdb_flush):  Call flush_hook if set.
1720         * Change _initialize_utils to initialize_utils cuz we don't use
1721         automatic initialization of utils.c anymore.
1722
1723         * Support for TK GUI.
1724         * Makefile.in:  Add rule for gdbtk.o.
1725         * configure.in:  Add support for --enable-gdbtk.
1726         * gdbtk.c:  New file.  Contains support routines for TK interface.
1727         * gdbtk.tcl:  New file.  Implements GUI policy.
1728
1729         * remote.c:  Get rid of #ifdef DONT_USE_REMOTE.  It's no longer
1730         necessary.
1731
1732 Thu Jul 28 14:52:01 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
1733
1734         * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Use newlib if it is
1735           there and we are using the gcc from the tree.
1736           (LD_FOR_TARGET): Look for ld in ../ld/ld.new.
1737
1738 Thu Jul 28 10:43:36 1994  Fred Fish  (fnf@cygnus.com)
1739
1740         * Makefile.in (annotate.o):  Add dependencies.
1741
1742 Wed Jul 27 14:34:42 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
1743
1744         * sparclite/aload.c: Added new -q (quiet) option.
1745           return 0 exit status if file was successfully downloaded.
1746
1747         * nlm/gdbserve.c: merge in command line argument parsing changes
1748           and bug fixes made to i386-nlmstub.c.
1749
1750         * i386-nlmstub.c: The returnLength field must be initialized
1751           before portConfig is passed to AIOGetPortConfiguration.
1752           Compare command line arguments with strnicmp(); args are
1753           case insensitive on netware.
1754
1755 Wed Jul 27 09:24:19 1994  Fred Fish  (fnf@cygnus.com)
1756
1757         * Makefile.in (DISTSTUFF):  Add definition.
1758         (diststuff):  Add for new distribution support.
1759         (gdb.tar.Z, make-proto-gdb.dir, setup-to-dist,
1760         gdb-$(VERSION).tar.Z, make-proto-gdb-1, make-proto-testsuite.dir):
1761         Remove old distribution building rules, now uses standard
1762         distribution support in parent directory Makefile.in.
1763
1764 Tue Jul 26 14:15:53 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1765
1766         * target.c (push_target): Cast result from xmalloc.
1767
1768 Tue Jul 26 18:20:46 1994  Paul Flinders  (ptf@smee)
1769
1770         * elfread.c (elf_symtab_read): Discard compiler labels generated
1771         by the Solaris 2.1/Intel SunPro compiler.
1772
1773 Mon Jul 25 18:19:24 1994  Stu Grossman  (grossman@cygnus.com)
1774
1775         * target.c (nomemory):  Fix prototype and routine to take correct
1776         args.
1777
1778 Mon Jul 25 15:38:23 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1779
1780         * Makefile.in (clean): Remove libgdb-files.
1781
1782 Mon Jul 25 11:50:57 1994  Stan Shebs  (shebs@andros.cygnus.com)
1783
1784         * coredep.c: Include inferior.h.
1785
1786 Mon Jul 25 11:36:02 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
1787
1788         * i386-nlmstub.c: Add support for NODE, PORT and BAUD command
1789           line arguments.
1790
1791 Sat Jul 23 14:36:09 1994  Stan Shebs  (shebs@andros.cygnus.com)
1792
1793         * symfile.c (deduce_language_from_filename): Recognize .S as asm,
1794         .cp as C++, alphabetize better.
1795
1796         * breakpoint.c (ignore, condition): Move usage note into body of
1797         help text, so first line can be one-line summary.
1798
1799 Sat Jul 23 00:58:15 1994  Stu Grossman  (grossman@cygnus.com)
1800
1801         * target.c (unpush_target):  Fix handling of removal of top target.
1802
1803 Fri Jul 22 17:30:39 1994  Stu Grossman  (grossman@cygnus.com)
1804
1805         * Makefile.in: Add stuff to build nlmstub.
1806         * Add rule for annotate.o to keep Sun make happy.
1807         * configure.in:  Add config for powerpc/Netware.
1808
1809         * partial-stab.h (near N_SO):  Don't call START_PSYMTAB with null
1810         filename.  This speeds up handling of trailing N_SO stabs (they
1811         mark the end of a .o file).
1812
1813         * target.c, target.h:  Change the way pushing and popping of
1814         targets work to support target overlays and inheritance.
1815         * corelow.c, hppa-tdep.c, inflow.c, remote-nindy.c, utils.c:
1816         Fixup references to current_target, due to previous changes.
1817
1818         * config/i386/tm-i386nw.h:  Enable longjmp support.  More work is
1819         needed to get the address of longjmp out of the target.
1820
1821 Tue Jul 19 13:25:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
1822
1823         * main.c: Include <ctype.h>.
1824
1825 Mon Jul 18 15:32:17 1994  Kung Hsu  (kung@mexican.cygnus.com)
1826
1827         * remote-mips.c (mips_readchar): Fix a bug in checking <IDT>
1828         prompt.
1829
1830 Mon Jul 18 14:26:35 1994  Stan Shebs  (shebs@andros.cygnus.com)
1831
1832         * solib.c (look_for_base): Don't deref exec_bfd if NULL.
1833
1834 Sun Jul 17 15:38:36 1994  Fred Fish  (fnf@cygnus.com)
1835
1836         * Makefile.in (VERSION):  Bump to 4.12.4.
1837
1838 Sun Jul 17 12:20:35 1994  Stan Shebs  (shebs@andros.cygnus.com)
1839
1840         Harris CX/UX support, from Bob Rusk (rrusk@mail.csd.harris.com).
1841         * configure.in (m88*-harris-cxux*): New configuration.
1842         * cxux-nat.c, config/m88k/cxux.mh, config/m88k/cxux.mt,
1843         config/m88k/xm-cxux.h, config/m88k/tm-cxux.h, config/m88k/nm-cxux.h:
1844         New files.
1845         * config/m88k/tm-m88k.h: Add comment about Harris OS.
1846         (TARGET_WRITE_PC): Pass pid through to register writers.
1847
1848         * configure.in (m68*): Put vendor-only-specified host configs
1849         after vendor-and-os-specified configs.
1850         (m68*-atari-sysv4*, m68*-cbm-sysv4*): Replace with m68*-*-sysv4.
1851
1852         * config/m88k/delta88.mh (MUNCH_DEFINE): Remove.
1853         * config/m88k/delta88.mt, config/m88k/delta88v4.mh: Format
1854         consistently.
1855
1856 Sat Jul 16 23:39:17 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1857
1858         * elfread.c (elf_symtab_read):  Handle error return from
1859         bfd_get_dynamic_symtab_upper_bound gracefully.
1860
1861 Sat Jul 16 14:43:17 1994  Stan Shebs  (shebs@andros.cygnus.com)
1862
1863         * inferior.h (ARCH_NUM_REGS): New macro, actual number of
1864         registers in use by the inferior.
1865         * coredep.c (fetch_core_registers, register_addr): Use it.
1866         * findvar.c (registers_changed, registers_fetched,
1867         read_register_bytes): Ditto.
1868         * infcmd.c (do_registers_info, registers_info): Ditto.
1869         * infptrace.c (fetch_inferior_registers,
1870         store_inferior_registers): Ditto.
1871         * stack.c (frame_info): Ditto.
1872
1873         * coredep.c (CORE_REGISTER_ADDR): New macro.
1874         (fetch_core_registers): Use it.
1875
1876         * breakpoint.c (ignore, condition): Add usage notes to help strings.
1877         * symfile.c (add-symbol-file): Add usage note to help string.
1878         (add_shared_symbol_files_command): New command.
1879
1880         gcc -Wall lint.
1881         * inferior.h (read_pc_pid): Declare.
1882         * breakpoint.c (watchpoint_check): Cache breakpoint in local
1883         variable b, remove unused variable other_type_used.
1884         * main.c (inferior.h, call-cmds.h): Include.
1885         (gdb_init): Declare.
1886         * remote.c (remote_wait): Return 0 by default.
1887
1888 Fri Jul 15 16:43:33 1994  Stan Shebs  (shebs@andros.cygnus.com)
1889
1890         Stop printing at null char option, from Oliver Meyer
1891         (omeyer@i3.informatik.rwth-aachen.de).
1892         * valprint.h, valprint.c (stop_print_at_null): New global.
1893         * valprint.c (_initialize_valprint): New print set subcommand
1894         "null-stop".
1895         * c-valprint.c (c_val_print): If stop_print_at_null is on, and
1896         printing a char array, adjust the number of chars to print.
1897
1898 Fri Jul 15 14:33:40 1994  Stan Shebs  (shebs@andros.cygnus.com)
1899
1900         From Kevin A. Buettner (kev@cujo.geg.mot.com).
1901         * m88k-tdep.c (examine_prologue): Modified to handle prologues for
1902         pic code in addition to prologues where an instruction from the
1903         prologue gets moved into the delay slot of a branch instruction
1904         immediately following the prologue.  A table of potential prologue
1905         instructions (prologue_insn_tbl) is now used for picking apart a
1906         function prologue.
1907         (frame_find_saved_regs): Changed the way in which limit gets set
1908         so that the delay slot of branch instructions immediately
1909         following the prologue gets examined.
1910         (pushed_size, store_parm_word, store_parm, push_parameters,
1911         collect_returned_value):  Deleted.
1912
1913 Fri Jul 15 01:06:00 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1914
1915         * infrun.c (wait_for_inferior):  Handle stepping into leaf
1916         functions whose prologue consists of gp loading code only.
1917
1918 Thu Jul 14 14:22:12 1994  Stan Shebs  (shebs@andros.cygnus.com)
1919
1920         * dbxread.c: Don't include libbfd.h.
1921         * dwarfread.c, elfread.c somread.c: Don't include libbfd.h,
1922         <time.h>, or <sys/types.h>.
1923         * elfread.c (elf_symfile_read): Use only standard BFD functions to
1924         collect information about the stab and stab string sections.
1925
1926 Thu Jul 14 13:17:39 1994  Kung Hsu  (kung@x1.cygnus.com)
1927
1928         * stabsread.c (read_huge_number): handle large unsigned number
1929         for stabs generated by os9k C compiler.
1930
1931 Wed Jul 13 18:58:15 1994  Stan Shebs  (shebs@andros.cygnus.com)
1932
1933         Breakpoint hit counts, from Bob Rusk (rrusk@mail.csd.harris.com).
1934         * breakpoint.h (hit_count): New breakpoint field.
1935         * breakpoint.c (show_breakpoint_hit_counts): New variable.
1936         (clear_breakpoint_hit_counts): New function.
1937         (bpstat_stop_status): Increment the hit count.
1938         (breakpoint_1): Display the hit count.
1939         * infcmd.c (run_command): Reset breakpoint hit counts.
1940         * target.c (generic_mourn_inferior): Don't clear ignore counts if
1941         displaying hit counts.
1942         
1943 Tue Jul 12 12:23:15 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1944
1945         * elfread.c (elf_symfile_read):  Unconditionally add dynamic
1946         symbols for all symbol files.  Makes skipping over the
1947         trampoline code work when stepping from a function in a shared
1948         library into a function in a different shared library for Irix 5.
1949         Other ELF targets do not have enough information in their
1950         dynamic symbol tables to make this work.
1951         (elf_symtab_read):  Relocate mst_solib_trampoline address.
1952
1953 Mon Jul 11 16:38:49 1994  Stan Shebs  (shebs@andros.cygnus.com)
1954
1955         Atari support, from Uwe Seimet (seimet@chemie.uni-kl.de).
1956         * configure.in (m68*-atari-sysv4*): New configuration.
1957         (m68*-cbm-sysv4*): Use m68kv4 instead of amix.
1958         * m68k-tdep.c (R_PS): Define as R_SR if necessary.
1959         * config/m68k/m68kv4.mh, config/m68k/m68kv4.mt,
1960         config/m68k/tm-m68kv4.h, config/m68k/xm-m68kv4.h: New files.
1961         * config/m68k/amix.mh, config/m68k/amix.mt,
1962         config/m68k/tm-amix.h, config/m68k/xm-amix.h: Removed, superseded
1963         by m68kv4 files.
1964
1965 Sat Jul  9 16:28:43 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1966
1967         * symtab.c (find_function_start_sal):  New function to find
1968         the start of a function from a function symbol.
1969         (decode_line_1, decode_line_2):  Use it instead of open coded
1970         partial copies of the code.
1971         (list_symbols):  Quote symbol name before passing it to
1972         break_command to enable proper handling of mangled symbols.
1973
1974 Wed Jul  6 20:22:07 1994  Per Bothner  (bothner@kalessin.cygnus.com)
1975
1976         * ch-exp.y (match_simple_name_string):  Don't lower-case here.
1977         * ch-exp.y (yylex):  First try name lookup using exact name
1978         typed by user;  if that fails, try lower-cased name.
1979
1980 Wed Jul  6 00:48:57 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1981
1982         * dbxread.c, elfread.c, mipsread.c, nlmread.c, os9kread.c:
1983         Move "no debugging symbols found" test to symfile.c.
1984         * symfile.c (syms_from_objfile, reread_symbols):  Add
1985         "no debugging symbols found" test.
1986         * coffread.c (init_stringtab):  Handle stripped files with a
1987         stringtab offset of zero gracefully.
1988         * osfsolib.c (solib_create_inferior_hook):  Use DYNAMIC flag from
1989         BFD instead of stop_pc heuristic to determine if it is a dynamically
1990         linked object file.
1991         * procfs.c (wait_fd):  Handle ENOENT error return from PIOCWSTOP
1992         ioctl, it indicates that the process has exited.
1993
1994 Mon Jul  4 19:28:56 1994  Jeff Law  (law@snake.cs.utah.edu)
1995
1996         * hppa-tdep.c (read_unwind_info): ELF unwind information is in the
1997         .PARISC.unwind section now.
1998
1999 Mon Jul  4 17:06:26 1994  Stan Shebs  (shebs@andros.cygnus.com)
2000
2001         * breakpoint.c (mention): Always show breakpoint address if no
2002         source file.
2003
2004 Sat Jul  2 01:51:33 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2005
2006         * solib.c (bfd_lookup_symbol, look_for_base):  Reinstate to reenable
2007         handling of shared libraries for non-ELF executables, but only if
2008         HANDLE_SVR4_EXEC_EMULATORS is defined.
2009         (locate_base):  Try to find debug_base in the dynamic linker
2010         for non-ELF executables if HANDLE_SVR4_EXEC_EMULATORS is defined.
2011         * config/sparc/tm-sun4sol2.h (HANDLE_SVR4_EXEC_EMULATORS):
2012         Define to enable handling of shared libraries for a.out executables,
2013         run under Solaris BCP.
2014
2015 Thu Jun 30 13:59:23 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2016
2017         * infrun.c (wait_for_inferior): Print "Program exited normally"
2018         regardless of batch_mode.
2019         * defs.h, top.c (batch_mode): Removed.
2020
2021 Wed Jun 29 18:53:36 1994  Stan Shebs  (shebs@andros.cygnus.com)
2022
2023         * Makefile.in (dcache_h): Remove redundant definition.
2024         (init.c): Add a comment.
2025         (top.c): Remove explicit compile action.
2026         * breakpoint.c (mention): Share code indicating location of
2027         break/watchpoints, don't print address if addressprint is off.
2028         * breakpoint.c, c-typeprint.c, c-valprint.c, energize.c, symtab.h
2029         (demangle): Remove redundant declarations.
2030         * eval.c: Remove redundant function declarations.
2031         * objfiles.h: Cosmetic and grammatical improvements.
2032         * TODO: Various updates.
2033
2034         * remote-mips.c: Replace all \r chars with \015.
2035         (mips_receive_header): Display control characters readably.
2036         (mips_xfer_memory): Add a simple progress display.
2037
2038 Wed Jun 29 13:11:45 1994  Steve Chamberlain  (sac@cirdan.cygnus.com)
2039
2040         * remote-e7000.c (e7000_open): Don't try a tcp open if we're
2041         using go32.
2042         * remote-hms.c (flush): New function.
2043         (expect): Get edge case right.
2044         (hms_read_inferior_memory): Be more tolerant of line noise.
2045
2046 Tue Jun 28 14:17:03 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2047
2048         * configure.in: Use i386m3.mh and i386m3.mt as names of host and
2049         target files, not non-existent mach3.mh and mach3.mt.
2050
2051 Wed Jun 29 00:26:17 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2052
2053         * dbxread.c (dbx_symfile_read):  Unconditionally add dynamic
2054         symbols for all symbol files.  Makes skipping over the
2055         trampoline code work when stepping from a function in a shared
2056         library into a function in a different shared library.
2057         (read_dbx_dynamic_symtab):  Relocate mst_solib_trampoline address.
2058
2059 Tue Jun 28 15:28:01 1994  Stu Grossman  (grossman@cygnus.com)
2060
2061         * dbxread.c, partial-stab.h (near N_SO):  SO stabs with blank
2062         names mean end of .o file.
2063         * infrun.c (wait_for_inferior):  Clean up multi-thread logic near
2064         top of routine.  Handle new thread notification cleanly.
2065         * lynx-nat.c (child_wait):  General cleanups, handle new LynxOS
2066         thread notification scheme.
2067         * (child_resume):  General cleanups, handle resumption of all
2068         threads properly.
2069
2070 Mon Jun 27 09:57:23 1994  Steve Chamberlain  (sac@cirdan.cygnus.com)
2071
2072         * ser-go32.c: Rewrite to run under windows.
2073         * ser-e7kpc.c: New file to support the E7000 with the PC ISA
2074         bus interface.
2075         * serial.c (serial_open): Notice device "pc".
2076         * remote-e7000.c: Fix copyright date.
2077         (expect): Compare \n and \r the same.
2078         (e7000_open): Allow pc as a serial port
2079         * sh/sh.mt: Add ser-e7kpc.
2080         * h8300/h8300hms.mt: Add ser-e7kpc.
2081         * main.c (proc_wait): Don't wait if using go32.
2082
2083 Mon Jun 27 00:35:51 1994  Jeff Law  (law@snake.cs.utah.edu)
2084
2085         * somread.c: Simplify by using stabsect_build_psymtabs.
2086         * dbxread.c (stabsect_build_psymtabs): New argument "text_name"
2087         corresponding to the name of the text section.  All references
2088         changed.
2089         (somstab_build_psymtabs): Delete function, no longer needed.
2090
2091 Sun Jun 26 23:54:08 1994  Jeff Law  (law@snake.cs.utah.edu)
2092
2093         * somread.c: Renamed from paread.c.  Changed function names and
2094         comments to reflect that this file deals with SOM (an object file
2095         format), rather than the PA (a cpu).
2096         (Makefile.in): Chaned appropriately.
2097         (config/pa/hppabsd.mh, config/pa/hppahpux.mh): Likewise.
2098         * dbxread.c (somstab_build_psymtabs): Renamed from
2099         pastab_build_psymtabs.
2100
2101 Fri Jun 24 08:15:42 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2102
2103         * core-sol2.c:  New file to handle ELF and BCP core file flavours.
2104         * config/sparc/sun4sol2.mh (NATDEPFILES):  Use it instead of
2105         core-svr4.
2106         * Makefile.in:  Updated for core-sol2.c.
2107         * README:  Add notes about SPARCworks cc under Solaris 2.x,
2108         from Casper H.S. Dik (casper@fwi.uva.nl).
2109         * config/mips/xm-makeva.h:  Removed, no longer necessary.
2110         * Makefile.in, config/mips/xm-irix3.h, config/mips/xm-irix5.h,
2111         config/mips/xm-mips.h, config/mips/xm-news-mips.h,
2112         config/mips/xm-riscos.h:  Remove references to xm-makeva.h
2113
2114 Wed Jun 22 17:48:21 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2115
2116         * gdba.el: Put program input and output in a separate buffer.
2117
2118 Wed Jun 22 16:54:15 1994  Fred Fish  (fnf@cygnus.com)
2119
2120         * energize-patches, main.c (main), top.c (gdb_init, pwd_command),
2121         top.h: Change all occurances of dirbuf to gdb_dirbuf.  Collides
2122         with global variable of same name in libnsl.so on UnixWare.
2123
2124 Wed Jun 22 14:40:52 1994  Kung Hsu  (kung@mexican.cygnus.com)
2125
2126         * symtab.c (decode_line_1): fix a bug in dealing with '<>'
2127         embedded in template name.
2128
2129 Tue Jun 21 14:06:46 1994  Kung Hsu  (kung@mexican.cygnus.com)
2130
2131         * config/i386/nm-linux.h: change calling convention of 
2132         TARGET_CAN_USE_HARDWARE_WATCHPOINT() and
2133         target_insert_watchpoint() and
2134         target_remove_watchpoint().
2135
2136         * config/mips/tm-mips64.h: define FORCE_LONG_LONG to force LONGEST
2137         to be long long in gdb.
2138         * config/mips/tm-bigmips.h: ditto.
2139
2140 Mon Jun 20 23:54:37 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2141
2142         * c-lang.c (asm_language_defn):  New definitions for language_asm,
2143         mostly copied from c_language_defn, to avoid warnings when
2144         switching between c and asm stack frames.
2145
2146 Mon Jun 20 13:51:55 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
2147
2148         * mdebugread.c (parse_symbol): Don't call ecoff_swap_tir_in or
2149         ecoff_swap_rndx_in directly; use the debug_swap pointer instead.
2150         (upgrade_type, handle_psymbol_enumerators): Likewise.
2151         (has_opaque_xref, cross_ref): Likewise.
2152         (elfmdebug_build_psymtabs): Call swap->read_debug_info to read
2153         debugging information, rather than doing it here.
2154         * mipsread.c (mipscoff_symfile_read): Call read_debug_info entry
2155         point in ecoff_debug_swap backend structure, rather than calling
2156         ecoff_slurp_symbolic_info directly.
2157
2158 Fri Jun 17 20:58:58 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2159
2160         * breakpoint.c: Include annotate.h.  Call annotate_field rather
2161         than printing annotation directly.
2162
2163         * main.c: Include string.h.
2164
2165 Thu Jun 16 14:41:37 1994  Stan Shebs  (shebs@andros.cygnus.com)
2166
2167         * fork-child.c (startup_inferior) [STARTUP_INFERIOR]: If defined,
2168         call it instead of doing normal loop.
2169         * infcmd.c (attach_command): Don't call wait_for_inferior if
2170         running Mach 3.
2171         * infrun.c (proceed) [PREPARE_TO_PROCEED]: If defined, call
2172         hook that can decide whether to step over the next breakpoint.
2173         * utils.c (wrap_here): Abort if wrap_buffer not allocated.
2174         (request_quit) [REQUEST_QUIT]: If defined, call it instead of
2175         doing normal quit.
2176
2177         * configure.in: Improve sorting/formatting of hosts and targets.
2178         (i[34]86-*-mach3*, i[34]86-*-osf1mk*, mips-*-mach3*,
2179         m88*-*-mach3*, ns32k-*-mach3*): Recognize.
2180         * Makefile.in (stop-gdb): New target.
2181         * stop-gdb.c: New file, utility to get attention of waiting GDBs
2182         in Mach 3.
2183
2184 Wed Jun 15 00:41:03 1994  Tom Lord  (lord@rtl.cygnus.com)
2185
2186         * top.c (gdb_init): Init current_directory in gdb_init.  Probably
2187         the identical initialization can be deleted from main.c, but i
2188         haven't done so just in case.
2189
2190 Tue Jun 14 17:24:41 1994  Tom Lord  (lord@x1.cygnus.com)
2191
2192         * gdba.el: Added menu windows and slightly improved window
2193         handling to gdba.el.  Fixed numerous minor bugs that were causing
2194         emacs and gdb to fall out of sync.
2195
2196 Tue Jun 14 16:18:44 1994  Kung Hsu  (kung@mexican.cygnus.com)
2197
2198         * breakpoint.c: annotate changes lost at merge, put back in.
2199
2200 Mon Jun 13 17:28:50 1994  Stan Shebs  (shebs@andros.cygnus.com)
2201
2202         * config/i386/i386sco.mh, i386sco4.mh (XDEPFILES): Remove
2203         i387-tdep.o.
2204
2205 Sun Jun 12 03:51:52 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2206
2207         * config/m68k/dpx2.mh (NATDEPFILES):  Remove duplicate inclusion
2208         of inftarg.o.
2209         * config/m68k/tm-dpx2.h (CANNOT_STORE_REGISTER):  Define to inhibit
2210         writing of floating registers, the dpx2 kernel disallows it.
2211         * irix5-nat.c (LM_ADDR):  The loaded address of the shared library
2212         is contained in o_praw.
2213         * irix5-nat.c (solib_map_sections):  Adjust sections by the
2214         difference between the loaded address and the prelinked address.
2215         * irix5-nat.c (solib_address):  Use LM_ADDR for the loaded start
2216         address.
2217         * mdebugread.c (parse_symbol):  Do not relocate stEnd/scText
2218         symbols, their value is absolute.
2219         * mdebugread.c (parse_partial_symbols):  Handle Irix 5.2 shared
2220         libraries fh->adr fields of zero. Relocate minimal symbol values
2221         upon readin. Relocate non-stabs symbols upon readin.
2222         * mdebugread.c (psymtab_to_symtab_1):  Use pst->textlow for the
2223         start address of the outermost block.
2224         * mdebugread.c (parse_lines, parse_procedure):  Pass in pst
2225         instead of section_offsets and use relocated pst->textlow for
2226         line number and procedure address relocations.
2227
2228         From gmo@MicroUnity.com (Guillermo A. Loyola):
2229         * mdebugread.c (parse_symbol, parse_partial_symbols, cross_ref):
2230         Handle SGI Irix5 stIndirect symbol type.
2231
2232 Fri Jun 10 14:52:56 1994  Kung Hsu  (kung@mexican.cygnus.com)
2233
2234         * breakpoint.c: fix a syntax error native cc does not like.
2235
2236         * Makefile.in: change sparclite-tdep.c to sparcl-tdep.c.
2237         * sparclite/Makefile.in: ditto.
2238         * sparcl-tdpe.c: change file name because first 8 chars has to be 
2239         unique.
2240         * sparcl-stub.c: ditto.
2241
2242         * .Sanitize: add sparclite-stub.c sparclite-tdep.c to keep.
2243
2244         * sparclite/Makefile.in: fix INCLUDE_CFLAGS to have {srcdir}/../config.
2245
2246 Fri Jun 10 10:38:15 1994  Jeff Law  (law@snake.cs.utah.edu)
2247
2248         * hppa-tdep.c (target_read_pc, target_write_pc): Accept (and
2249         ignore) a PID argument.
2250         (hppa_pop_frame): Pass a PID to target_write_pc.
2251         * config/pa/tm-hppa.h (TARGET_READ_PC, TARGET_WRITE_PC): Accept
2252         and pass through a PID argument.
2253         (target_read_pc, target_write_pc): Update prototypes.
2254
2255 Thu Jun  9 18:10:44 1994  Kung Hsu  (kung@mexican.cygnus.com)
2256
2257         * Makefile.in: add new file sparclite-tdep.c.
2258         * sparclite/Makefile.in: add new file sparclite-stub.c.
2259         * sparclite/hw_breakpoint.note: note for SPARClite hardware breapoint
2260         support.
2261         * config/sparc/sparclite.mt: add sparclite-tdep.o.
2262         * config/sparc/tm-sparclite.h: add hardware breakpoints support 
2263         defiines and code.
2264         * sparclite-tdep.c: new file, contains hardware breakpoint support
2265         code.
2266         * sparclite-stub.c: new file, stub code that add support hardware
2267         breakpoint support.
2268         * breakpoint.c: add hardware breakpoint support.
2269         * breakpoint.h: add new breakpoint type to support hardware
2270         breakpoint.
2271         * config/mips/nm-irix4.h: change interface for target dependent
2272         code supporting watch point.
2273         * config/pa/nm-hppab.h: change interface for target dependent
2274         code supporting watch point.
2275
2276 Thu Jun  9 14:59:58 1994  Kung Hsu  (kung@mexican.cygnus.com)
2277
2278         * remote-os9k.c (rombuf_command): fix a bug accepting rombug
2279         output.
2280         * stabsread.c (read_struct_fields): os9k nested structure does not
2281         have terminating ';', instead it just get to ',' and bit position
2282         and length.
2283
2284 Wed Jun  8 23:20:45 1994  Stu Grossman  (grossman@cygnus.com)
2285
2286         * nlmread.c (nlm_symtab_read):  Clean up a bit.
2287         * (nlm_symfile_read):  Record bounds of main() so that backtrace
2288         command will know where to stop.
2289         * objfiles.c (objfile_relocate):  Relocate entry point/func info
2290         for backtrace as well.
2291         * objfiles.h:  Define values for invalid PCs for entry point info.
2292         * symfile.c (init_entry_point_info):  Initialize invalid values
2293         with aforementioned macros.
2294         * config/alpha/tm-alphanw.h:  Turn on FRAME_CHAIN_VALID_ALTERNATE
2295         to cause backtrace to stop when it gets back to main().
2296         * config/i386/tm-i386nw.h:  Ditto.
2297
2298 Sat Jun  4 18:17:03 1994  Per Bothner  (bothner@kalessin.cygnus.com)
2299
2300         Fix value_print, which used to be ostensibly language-independent,
2301         but would print pointers and arrays in C syntax.  Instead, call
2302         a language-specific function.
2303         * language.h (struct language_defn):  New functional field
2304         la_value_print.
2305         (LA_VALUE_PRINT):  New macro.
2306         * language.c (unk_lang_value_print):  New stub/dummy function.
2307         (unknown_language_defn, auto_language_defn, local_language_defn):
2308         Use it.
2309         * c-valprint.c (c_value_print):  New function, with code moved from:
2310         * valprint.c (value_print):  ... here.  Now just invoke
2311         LA_VALUE_PRINT to do language-specific stuff.
2312         * valprint.c (value_print_array_elements):  Make non-static.
2313         * c-lang.c (c_language_defn, cplus_language_defn):  Add
2314         c_value_print in the la_value_print field.
2315         * m2-lang.c (m2_language_defn):  Likewise.
2316         * ch-lang.c (chill_language_defn):  But here use chill_value_print.
2317         * ch-valprint.c (chill_val_print):  Print null pointer as NULL.
2318         * ch-valprint.c (chill_value_print):  New function, based on
2319         c_value_print, but use Chill "look and feel."
2320         * c-lang.h (c_value_print):  New prototype.
2321         * ch-lang.h (chill_value_print):  New prototype.
2322         * value.h (value_print_array_elements):  New prototype.
2323
2324         * ch-valprint.c (chill_val_print, case TYPE_CODE_BITSTRING
2325         and case TYPE_CODE_SET):  Check that the element type isn't a stub.
2326
2327 Fri Jun  3 09:15:00 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2328
2329         * main.c: Move entire file except for #ifndef MAIN_OVERRIDE code
2330         to new file top.c.  Make things extern instead of static and
2331         similar rearrangements to deal with this.
2332         * top.h: New file.
2333         * utils.c: Move fputs_unfiltered to main.c.  Remove 
2334         FPUTS_UNFILTERED_OVERRIDE ifndef.
2335         * Makefile.in: Change so that gdb uses main.c, utils.c, and top.c,
2336         and libgdb uses utils.c and top.c.
2337
2338 Thu Jun  2 23:19:10 1994  Jeff Law  (law@snake.cs.utah.edu)
2339
2340         * hppa-tdep.c (skip_trampoline_code): Fix typo.
2341
2342 Thu Jun  2 18:09:59 1994  Per Bothner  (bothner@kalessin.cygnus.com)
2343
2344         * ch-valprint.c (chill_val_print_array_elements):  New function.
2345         A Chill version of val_print_array_elements, it prints the
2346         array index labels, in additions ot the array element values.
2347         (chill_val_print):  Use the new function.
2348
2349 Thu Jun  2 08:50:00 1994  Stu Grossman  (grossman@cygnus.com)
2350
2351         * configure.in:  Add nlm subdir to configdirs for alpha-*-netware
2352         target.
2353         * defs.h (enum language):  Add language_asm.
2354         * findvar.c (read_register_bytes read_register_gen
2355         write_register_bytes read_register read_register_pid
2356         write_register write_register_pid supply_register):  Move multi-
2357         thread handling down into these routines.  Create XXX_pid routines
2358         that allow register references to specify the pid.
2359         * findvar.c infcmd.c (read_pc read_pc_pid write_pc write_pc_pid
2360         read_sp write_sp read_fp write_fp):  Move these routines from
2361         infcmd to findvar to centralize the whole mess.
2362         * i386-nlmstub.c:  Portability fixes.
2363         * infptrace.c (child_resume):  Conditionalize to allow other natives
2364         to override it.  Remove PIDGET gubbish, it's no longer necessary.
2365         * infrun.c (wait_for_inferior):  Put registers_changed() before
2366         target_wait() to speed up remote debugging.
2367         * Replace code that reads registers from other threads with much
2368         nicer looking new function calls (see changes to findvar.c).
2369         * Don't skip prologues if debugging assembly source.
2370         * lynx-nat.c (child_resume):  Lynx now needs it's own version of
2371         child_resume to handle multi-thread debugging properly.
2372         * remote.c:  Add O response to get console output from target.
2373         * (readchar): Add timeout parameter.  Handle SERIAL_EOF and
2374         SERIAL_ERROR here to simplify callers.
2375         * Change static var timeout to remote_timeout.
2376         * (fromhex):  Remove unnecessary return -1 at end of routine.
2377         * (remote_wait):  Turn this into a big switch statement.  Add
2378         support for O response.
2379         * (putpkt):  Remove unnecessary handling of SERIAL_EOF/ERROR.
2380         * (getpkt):  Split getpkt into two parts.  read_frame deals with
2381         all formatting issues, run-length encoding, and framing.  getpkt
2382         now handles error recovery, and frame detection.
2383         * ser-tcp.c (tcp_readchar):  Handle EINTR from read().
2384         * ser-unix.c (hardwire_raw):  Set CLOCAL so that we ignore modem
2385         control.  (hardwire_readchar):  Handle EINTR from read().
2386         * symfile.c (deduce_language_from_filename):  Add support for .s
2387         files.
2388         * config/nm-lynx.h:  Define CHILD_WAIT so that lynx-nat.c can
2389         override infptrace's child_wait.
2390         * config/rs6000/rs6000lynx.mh:  Use xm-rs6000ly.h & nm-rs6000ly.h
2391         instead of XXXlynx.h.
2392         * config/rs6000/rs6000lynx.mt:  Use tm-rs6000ly.h instead of
2393         tm-rs6000lynx.h.
2394         * nlm/gdbserve.c:  Portability fixes.
2395
2396 Tue May 31 20:35:44 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2397
2398         * inftarg.c (child_wait): Call proc_wait, not wait.
2399         (child_mourn_inferior): Call proc_remove_foreign.
2400         * main.c (gdb_init): Call init_proc.
2401         * main.c: Provide dummy versions of init_proc, proc_wait, and
2402         proc_remove_foreign for the gdb case (the libgdb case provides its
2403         own versions of these functions).
2404         * Makefile.in (libgdb-files): Add libproc.a.
2405
2406 Wed Jun  1 11:08:52 1994  Stan Shebs  (shebs@andros.cygnus.com)
2407
2408         Hardware watchpoints for Linux, from Rick Sladkey
2409         (jrs@world.std.com).
2410         * infrun.c (wait_for_inferior) [HAVE_CONTINUABLE_WATCHPOINT]: Add
2411         new hardware breakpoint recovery method.
2412         * i386v-nat.c (i386_insert_watchpoint,
2413         i386_insert_nonaligned_watchpoint, i386_remove_watchpoint,
2414         i386_stopped_by_watchpoint) [TARGET_CAN_USE_HARWARE_WATCHPOINT]:
2415         New functions to support the 386 hardware debugging registers.
2416         * config/i386/nm-linux.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT,
2417         HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT,
2418         target_insert_watchpoint, target_remove_watchpoint): Define these
2419         macros to use the hardware debugging functions in i386v-nat.c.
2420
2421 Wed May 25 17:06:15 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2422
2423         * Makefile.in: Replace libgdb.a with libgdb-files.  Make "all"
2424         build it.
2425
2426 Thu May 19 09:56:20 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2427
2428         * target.c, target.h: New variables target_activity_function and
2429         target_activity_fd.
2430         * inflow.c, inferior.h: New functions set_sigio_trap and
2431         clear_sigio_trap.
2432         * inftarg.c (child_wait), procfs.c (wait_fd): Call them.
2433
2434 Wed May 18 13:01:55 1994  Doug Evans  (dje@canuck.cygnus.com)
2435
2436         * remote-sim.h (sim_verbose): Delete.
2437         Document callbacks needed.
2438         (sim_*): Change result to void where there isn't one.
2439         (sim_open): Clarify argument and error response.
2440         (sim_close): Declare.
2441         (sim_load): Change bfd_handle argument to file name.  Clarify result.
2442         (sim_create_inferior): Renamed from sim_set_args.
2443         (sim_set_pc): Delete.
2444         (sim_info): Delete printf_fn argument.
2445         * remote-sim.c (gdbsim_kill): Add comment describing purpose.
2446         (gdbsim_load): Try sim_load first.
2447         (gdbsim_create_inferior): Call sim_create_inferior.
2448         (gdbsim_open): Handle args == NULL.  Update call to sim_open.
2449         (gdbsim_close): Call sim_close.
2450         (gdbsim_files_info): Update call to sim_info.
2451         (gdbsim_ops): Realign comments.
2452
2453         * printcmd.c (decode_format): Allow TARGET_PTR_BIT to be non-constant.
2454
2455 Tue May 17 16:45:20 1994  Stan Shebs  (shebs@andros.cygnus.com)
2456
2457         * xcoffread.c (read_xcoff_symtab): For C_FILE symbols, only use
2458         the auxent if the symbol's name is ".file".  From David Edelsohn 
2459         <c1dje@watson.ibm.com>.
2460
2461 Tue May 17 11:08:22 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2462
2463         * breakpoint.c (breakpoint_1): Fix typo.
2464
2465         * annotate.c (annotate_field_end): Fix typo.
2466
2467         * Makefile.in: Move annotate.o from COMMON_OBS to OBS.
2468
2469         * Makefile.in (TSSTART): Remove; no longer used.
2470
2471         * utils.c (vfprintf_maybe_filtered, vfprintf_unfiltered): Call
2472         fputs_unfiltered and exit directly, rather than fatal.  The latter
2473         calls vfprintf_unfiltered!
2474
2475         * gdbtypes.h, gdbtypes.c (can_dereference): New function.
2476         * value.h, printcmd.c (print_value_flags): Move from here...
2477         * annotate.c: ...to here, and make it use can_dereference.
2478
2479 Sat May 14 15:13:52 1994  Stan Shebs  (shebs@andros.cygnus.com)
2480
2481         * inflow.c (job_control, attach_flag, generic_mourn_inferior):
2482         Remove, needed for both native and cross.
2483         * target.c (attach_flag, generic_mourn_inferior): Put here.
2484         * utils.c (job_control): Put here.
2485         (terminal.h): Don't include anymore.
2486
2487 Sat May 14 09:11:44 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2488
2489         * source.c (find_source_lines): Always use code that was #ifdef
2490         BROKEN_LARGE_ALLOCA.  Do the cleanup before returning, rather than
2491         leaving it on the chain.  Reindent much of this function.
2492         * config/sparc/{xm-sun4sol2.h,xm-sun4os4.h},
2493         config/i386/{xm-sun386.h,xm-i386m3.h,xm-i386mach.h},
2494         config/m68k/{sun3os4.h,xm-news.h,xm-hp300hpux.h},
2495         config/ns32k/xm-ns32km3.h: Remove all references to
2496         BROKEN_LARGE_ALLOCA; with the above change it is no longer needed.
2497         * main.c, fork-child.c, many config files: Remove all
2498         SET_STACK_LIMIT_HUGE code; with the above changes it should no
2499         longer be needed.
2500
2501         * symtab.c (lookup_partial_symbol): Use if and abort, not assert.
2502         This avoids __eprintf troubles.
2503
2504 Fri May 13 08:10:21 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2505
2506         * main.c (main): Surround in #ifndef MAIN_OVERRIDE.  Move
2507         initialization code which needs to be called even if we bypass the
2508         command line stuff into gdb_init.
2509         * utils.c (fputs_unfiltered): Surround in #ifndef
2510         FPUTS_UNFILTERED_OVERRIDE.
2511         * Makefile.in (libgdb.a): New target.
2512
2513         * utils.c: Rearrange I/O stuff a bit so that all output goes
2514         through fputs_unfiltered.  Use vasprintf; removes arbitrary limit
2515         which made %s not work with arbitrarily large strings.
2516         * printcmd.c (printf_command): Use printf_filtered, not
2517         printf_unfiltered and printf, now that arbitrary limit is gone.
2518
2519         gcc -Wall lint:
2520         * breakpoint.c (watchpoint_check): Remove unused variable b.
2521         * stack.c (print_frame_info): Move sp and buf inside #if.
2522         * eval.c (evaluate_subexp): Remove unused variables pp,
2523         mangle_ptr, ptr, and mangle_tstr.
2524         * valarith.c (value_x_binop): Remove unused variables mangle_tstr
2525         and mangle_ptr.
2526         * symtab.c (lookup_symtab): Put variable copy inside #if.
2527         (decode_line_1): Put variable q1 inside #if 0.
2528         * target.h: Declare target_link.
2529         * infrun.c (wait_for_inferior): Remove unused variables signame.
2530         * remote.c (remote_resume): Remove unused variable name.
2531         * c-exp.y (parse_number): Parenthesize operand of shift.
2532         * dbxread.c (record_minimal_symbol): Parenthesize operand of &&
2533         (this is a semantic change, the warning seems to have detected a bug).
2534         * dbxread.c (end_psymtab): Move variable p1 inside #if.
2535         * coffread.c: Move variable temptype inside #if.
2536         * ch-typeprint.c (chill_type_print_base): Remove unused variable
2537         name.
2538         * ch-valprint.c: #include typeprint.h and ch-lang.h.
2539         (chill_val_print): Remove unused variable in_range.
2540         (chill_val_print): Remove statement "length > TYPE_LENGTH (type);".
2541         (chill_val_print): Add default case for switch.
2542         * stabsread.h: Declare stabsect_build_psymtabs.
2543         * os9kread.c (read_minimal_symbols): Make this return void.
2544         (os9k_symfile_read): Remove unused variables stb_exist and val.
2545         (os9k_symfile_init): Remove unused variable val.
2546         (fill_sym): Remove unused variable id.
2547         (read_os9k_psymtab): Put variable back_to inside #if 0.  Remove
2548         unused variable nsl.
2549         Remove unused variable symfile_bfd.
2550         #if 0 unused variables lbrac_unmatched_complaint and
2551         lbrac_mismatch_complaint.
2552         Remove declaration for non-existent function os9k_next_symbol_text.
2553
2554         * annotate.c, annotate.h: New files, containing a function for
2555         each annotation which outputs it.
2556         * Move breakpoints_changed from breakpoint.c to annotate.c.
2557         * breakpoint.c, blockframe.c, infrun.c, cp-valprint.c, main.c,
2558         printcmd.c, source.c, stack.c, utils.c, valprint.c:
2559         Use annotate.c functions to output annotations.
2560         * Makefile.in (OBS): Add annotate.o.
2561
2562 Thu May 12 10:46:27 1994  Jeff Law  (law@snake.cs.utah.edu)
2563
2564         * hppa-tdep.c (read_unwind_info): Make sure elf_unwind_size and
2565         elf_unwind_entries are always initialized.
2566
2567         * hppa-tdep.c (skip_trampoline_code): Handle argument relocation
2568         stubs which return directly to the caller rather than to the stub
2569         itself.
2570
2571 Wed May 11 20:11:51 1994  Stan Shebs  (shebs@andros.cygnus.com)
2572
2573         * c-exp.y (yyerror): Display a more informative error message.
2574         * ch-exp.y (yyerror): Ditto, don't use global yychar.
2575         * m2-exp.y (yyerror): Ditto.
2576
2577 Tue May 10 11:57:53 1994  Stan Shebs  (shebs@andros.cygnus.com)
2578
2579         * inflow.c (job_control): Move definition to front of file.
2580
2581 Tue May 10 14:42:37 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2582
2583         * maint.c (print_section_table): Rename SEC_SHARED_LIBRARY to
2584         SEC_COFF_SHARED_LIBRARY to match corresponding change in bfd.
2585
2586 Fri May  6 13:30:22 1994  Stan Shebs  (shebs@andros.cygnus.com)
2587
2588         * Makefile.in (kdb): Remove old init.c creation commands.
2589         * configure.in (sparclite): Match on sparclite*.
2590         * sparclite/aload.c (main): Only change section addresses for
2591         a.out format object files.
2592
2593 Fri May  6 13:24:04 1994  Steve Chamberlain  (sac@cygnus.com)
2594
2595         * config/i386/go32.mh: Define CC.
2596
2597 Fri May  6 11:56:54 1994  Stan Shebs  (shebs@andros.cygnus.com)
2598
2599         * gdbserver/Makefile.in: Remove irrelevant definitions and
2600         comments inherited from the gdb Makefile.
2601         (BFD_DIR, BFD, BFD_SRC, BFD_CFLAGS): Add from gdb Makefile.
2602         (VERSION): Update to 4.12.3.
2603         (gdbserver): Remove any existing executable first.
2604         (distclean, realclean): Remove nm.h.
2605         * gdbserver/low-lynx.c: Add Sparc Lynx support.
2606         * gdbserver/low-sparc.c, gdbserver/low-sun3.c (sys/wait.h):
2607         Don't use absolute pathname.
2608
2609 Thu May  5 12:00:22 1994  Stan Shebs  (shebs@andros.cygnus.com)
2610
2611         * rs6000-nat.c (vmap_ldinfo): Don't fail if fstat returns an
2612         error.
2613
2614 Wed May  4 06:56:03 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2615
2616         * infrun.c (proceed, normal_stop, wait_for_inferior), breakpoint.c
2617         (print_it_normal): Add annotations for the inferior starting and
2618         stopping, and for all the various messages related to how it
2619         stopped.
2620
2621         * printcmd.c (do_one_display): Annotate.
2622         * stack.c (print_frame_info): Annotate printing of stack frames.
2623
2624 Wed May  4 18:15:51 1994  Stu Grossman  (grossman@cygnus.com)
2625
2626         * remote.c (get_offsets):  Handle case where stub doesn't support
2627         qOffsets message.
2628
2629 Wed May  4 15:30:39 1994  Per Bothner  (bothner@kalessin.cygnus.com)
2630
2631         Add partial support for g++ code compiled with -fvtable-thunks.
2632         * c-valprint.c (c_val_print):  Add vtblprint support
2633         when using thunks.
2634         * cp-valprint.c (cp_is_vtbl_member):  A vtable can be an array of
2635         pointers (if using thunks) as well as array of structs (otherwise).
2636         * cp-valprint.c (vtbl_ptr_name_old, vtbl_ptr_name):  Move to global
2637         level, and make the latter non-static (so define_symbol can use it).
2638         * stabsread.c (define_symbol):  If the type being defined is a
2639         pointer type named "__vtbl_ptr_type", set the TYPE_NAME to that name.
2640         * symtab.h (VTBL_PREFIX_P):  Allow "_VT" as well as "_vt".
2641         * values.c (value_virtual_fn_field):  Handle thunks.
2642         * values.c (value_headof):  Minor efficiency hack.
2643         * values.c (value_headof):   Incomplete thunk support.  FIXME.
2644
2645 Wed May  4 06:56:03 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2646
2647         * valprint.c (print_longest): Clarify comment about use_local.
2648         * printcmd.c, defs.h (print_address_numeric), callers in
2649         symmisc.c, symfile.c, stack.c, source.c, remote.c, infcmd.c,
2650         cp-valprint.c, core.c, ch-valprint.c, c-valprint.c, breakpoint.c,
2651         exec.c: New argument use_local.
2652         * source.c (identify_source_line): Use filtered output.  Use
2653         print_address_numeric. 
2654
2655         * core.c (memory_error), symtab.c (cplusplus_hint, decode_line_1),
2656         language.c (type_error, range_error): Use filtered output.
2657         * utils.c (error_begin): Update comment to tell people to use
2658         filtered output.
2659
2660         * Makefile.in (HFILES_WITH_SRCDIR): List bfd.h.
2661         (HFILES_NO_SRCDIR): List gdbcore.h not gdbcore_h, so as not to get
2662         bfd.h.
2663
2664 Tue May  3 07:41:33 1994  Jim Kingdon  (kingdon@cygnus.com)
2665
2666         * procfs.c (procfs_wait): Reinstate code which deduces the signal
2667         from the fault, #ifndef FAULTED_USE_SIGINFO.
2668         * config/sparc/tm-sun4sol2.h: Define FAULTED_USE_SIGINFO.
2669
2670 Fri Apr 29 18:15:04 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2671
2672         * breakpoint.c (breakpoint_1): Annotate each field of the headers.
2673         Explicitly annotate each record.
2674
2675 Fri Apr 29 15:56:18 1994  Stan Shebs  (shebs@andros.cygnus.com)
2676
2677         * xcoffexec.c: Reformat to standards and lint.
2678         (language.h): Include.
2679         (exec_close): Declare arg "quitting".
2680         (file_command): Declare arg "from_tty".
2681         (map_vmap): Cast xmalloc result to PTR.
2682         * rs6000-nat.c: Reformat to standards and lint.
2683         (exec_one_dummy_insn): Use char array for saved instruction.
2684         (fixup_breakpoints): Declare.
2685         (vmap_ldinfo): Be more informative in fatal error messages.
2686         (xcoff_relocate_symtab): Define to return void.
2687         * xcoffsolib.h: Reformat to standards, improve comments.
2688         * config/rs6000/nm-rs6000.h (xcoff_relocate_symtab): Declare.
2689
2690 Thu Apr 28 08:40:56 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2691
2692         * utils.c, defs.h (error_begin): New function.
2693         (quit): Print annotation before printing the error message.
2694         * main.c (return_to_top_level): Print annotation before doing the
2695         longjmp.
2696         * symtab.c (decode_line_1): Call error not warning and then
2697         return_to_top_level.  Call error_begin and printf_unfiltered
2698         rather calling warning (before calls to return_to_top_level).
2699         * core.c (memory_error): Use error_begin, printf_unfiltered,
2700         print_address_numeric and return_to_top_level instead of error.
2701         Cleans up a FIXME-32x64.
2702         * language.c (type_error, range_error): Call error_begin
2703         not just target_terminal_ours.
2704
2705         * dbxread.c (stabsect_build_psymtabs): Assign to sym_stab_info
2706         directly, rather than via DBX_SYMFILE_INFO.  A cast on the left
2707         side of an assignment is non-portable.
2708
2709         * utils.c (query): Change syntax of query annotations to be
2710         consistent with other input annotations.
2711         (prompt_for_continue): Likewise for prompt-for-continue annotation.
2712
2713 Thu Apr 28 01:20:39 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2714
2715         * mdebugread.c (psymtab_to_symtab_1):  Do not call sort_blocks
2716         for stabs symtabs.
2717         * mips-tdep.c (mips_skip_prologue):  Handle prologues for functions
2718         that have a stack frame size of 32k or larger (from Paul Flinders).
2719         Remove #if 0'd code.
2720
2721 Wed Apr 27 16:33:51 1994  Stan Shebs  (shebs@andros.cygnus.com)
2722
2723         * lynx-nat.c (CANNOT_STORE_REGISTER): Add a fallback definition
2724         for Lynx platforms that need it.
2725         * config/nm-lynx.h (__LYNXOS): Define if not already defined.
2726
2727 Wed Apr 27 16:01:37 1994  Jim Kingdon  (kingdon@cygnus.com)
2728
2729         * procfs.c (procfs_wait): Use the signal from the pr_info rather
2730         than trying to deduce it from the fault.
2731
2732 Wed Apr 27 12:22:46 1994  Steve Chamberlain  (sac@cygnus.com)
2733
2734         * printcmd.c (print_address_symbolic): Initialize name to empty
2735         string to avoid core dump if lookup fails.
2736         * remote-e7000.c (printf_e7000debug): Error if target not open.
2737
2738 Tue Apr 26 22:45:24 1994  Stu Grossman  (grossman at cygnus.com)
2739
2740         * i386-nlmstub.c:  Update to be more in line with PIN stub.
2741         * nlm/gdbserve.c (putDebugChar):  Install bug fix from i386-nlmstub.
2742         * (hex2mem):  Init ptr.
2743         * General cleanups to use ConsolePrintf, standard prologues, etc...
2744
2745 Tue Apr 26 10:23:04 1994  Stu Grossman  (grossman at cygnus.com)
2746
2747         * i386-nlmstub.c:  More changes to be compatible with remote.c.
2748
2749         * dbxread.c:  Move a bunch of strncmps out of process_one_symbol
2750         into (the far less frequently called) dbx_symfile_read.
2751
2752         * i386-nlmstub.c:  An interim version till we get PIN for the x86.
2753
2754 Tue Apr 26 09:50:45 1994  Stu Grossman  (grossman at cygnus.com)
2755
2756         * dbxread.c (record_minimal_symbol):  Record the section
2757         associated with the symbol to make dynmaic relocation work.
2758         * (dbx_symfile_read, process_one_symbol):  Fixes to work around
2759         Solaris brain-damage which don't apply to relocatable object
2760         files.
2761         * (stabsect_build_psymtabs):  New routine to read stabs out of an
2762         arbitrarily named section.
2763         * nlmread.c (nlm_symtab_read):  Read ALL syms from the NLM, not just
2764         globals.
2765         * (nlm_symfile_read):  Call stabsect_build_psymtabs to read the
2766         stabs out of the nlm.
2767         * partial-stabs.h (cases 'f' & 'F'):  Fixes to work around Solaris
2768         brain-damage which don't apply to relocatable object files.
2769         * remote.c (putpkt):  Improve error reporting and error handling.
2770         * (get_offsets):  Temporary kludge to force data & bss sections to
2771         have the same relocation.
2772         * stabsread.c (define_symbol, scan_file_globals):  Record section
2773         info in sym.
2774
2775 Sat Apr 23 19:05:52 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2776
2777         * breakpoint.c (breakpoint_1): Annotate each field of output.  Add
2778         FIXME-32x64 comment.
2779
2780 Fri Apr 22 16:43:54 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2781
2782         * infrun.c (wait_for_inferior): Move call to flush_cached_frames
2783         to after call to target_wait.  This means that flush_cached_frames
2784         can call target_terminal_ours if it wants to.
2785         * infrun.c (wait_for_inferior) [HAVE_NONSTEPPABLE_WATCHPOINT]: Add
2786         comment about why the code is dubious.
2787
2788         * stabsread.c (read_type): Call read_type, not nonexistent
2789         os9k_read_type.
2790
2791 Fri Apr 22 14:25:36 1994  Kung Hsu  (kung@mexican.cygnus.com)
2792
2793         * remote-os9k.c (rombug_fetch_registers): set trace mode
2794         correctly.
2795         * remote-os9k.c (rombug_read_inferior_memory): cache data in
2796         buffer.
2797         * os9kread,c (read_os9k_psymtab): process file symbol to truncate
2798         extra info.
2799         * os9kread.c (os9k_read_ofile_symtab): proper casting of args
2800         passed to process_one_symbol.
2801         * stabsread.c (read_type): process os9k functio prototype.
2802
2803 Fri Apr 22 11:27:39 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2804
2805         * solib.c (symbol_add_stub): If so->textsection is NULL, don't
2806         dump core.
2807
2808 Thu Apr 21 07:45:49 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2809
2810         * utils.c (prompt_for_continue): Annotate prompt.
2811         (query): Annotate query.
2812         * printcmd.c (print_frame_args): Change syntax of argument
2813         annotation to make name and value part of a single group of
2814         annotations, not two separate groups.
2815         * cp-valprint.c (cp_print_value_fields): Likewise for fields.
2816         * valprint.c (val_print_array_elements): Change syntax of
2817         annotation to be more concise.
2818         * main.c, defs.h (command_line_input): New argument tells what
2819         string to include in the annotations.
2820         * symtab.c (decode_line_2), main.c (read_command_lines,
2821         command_loop): Change callers.
2822
2823         * breakpoint.c (watch_command): Use (CORE_ADDR)0, not NULL, for
2824         target null pointer.
2825         * blockframe.c (find_frame_addr_in_frame_chain): Likewise.
2826
2827         * printcmd.c (output_command): Annotate things we print here too.
2828         * printcmd.c (print_command_1): Add "value-history-value" annotation.
2829         * Move declaration of print_value_flags from defs.h to value.h.
2830         * main.c (command_line_input): Call wrap_here as well as gdb_flush.
2831
2832 Thu Apr 21 09:29:37 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2833
2834         * dbxread.c (read_dbx_dynamic_symtab):  Reinstall support for sun3,
2835         BFD handles sun3 dynamic relocations now.
2836         * elfread.c (elf_symtab_read, elf_symfile_read):  Handle dynamic
2837         symbol table.
2838
2839 Wed Apr 20 19:41:21 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2840
2841         * printcmd.c (print_command_1): Annotate the top-level expressions
2842         that we print.
2843         (print_frame_args): Annotate each argument.
2844         * printcmd.c, defs.h (print_value_flags): New function.
2845         * cp-valprint.c (cp_print_value_fields): Annotate each field.
2846         * valprint.c (val_print_array_elements): Annotate each array element.
2847
2848 Wed Apr 20 13:18:41 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2849
2850         * findvar.c (read_var_value):  Handle LOC_REPARM_ADDR case correctly,
2851         the register contains a pointer to the type, not the type itself.
2852
2853 Mon Apr 11 10:44:35 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
2854
2855         * main.c (main): Accept --annotate=N option and make --fullname
2856         the same as --annotate=1.
2857         (command_line_input): Print annotatation before and after prompt.
2858         * blockframe.c (flush_cached_frames): Print annotation.
2859         * Rename frame_file_full_name to annotation_level and move it from
2860         symtab.h to defs.h.
2861         * source.c (identify_source_line): If annotation_level > 1,
2862         change output format.
2863         * breakpoint.c: Print annotation whenever a breakpoint changes.
2864         * main.c: New variable server_command.
2865         (command_line_input): Parse "server " and set server_command.
2866         (dont_repeat): Check server_command.
2867
2868 Wed Apr 20 08:37:16 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2869
2870         * xcoffread.c (xcoff_next_symbol_text): Don't return before
2871         updating raw_symbol and symnum.  Return a value in the case where
2872         we complained.
2873
2874         * dstread.c, coffread.c: Don't define pending_blocks; buildsym.c
2875         takes care of it.
2876         * parse.c: Don't define block_found; it is defined in symtab.c.
2877         * parser-defs.h: Add comment regarding block_found.
2878
2879 Tue Apr 19 09:46:05 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
2880
2881         * hppa-tdep.c (internalize_unwind_info): Delete unused indexp
2882         argument.
2883
2884 Mon Apr 18 13:18:56 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2885
2886         * dbxread.c (read_dbx_dynamic_symtab):  Relocate BFD symbols by
2887         section vma. Do not read dynamic relocs for sun3 executables to
2888         avoid BFD assertion message.
2889
2890 Mon Apr 18 10:08:07 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
2891
2892         * nm-hppab.h (KERNEL_U_ADDR): Define.
2893         (FIVE_ARG_PTRACE): Likewise.
2894         (CANNOT_STORE_REGISTER): Likewise.
2895         * nm-hppah.h (KERNEL_U_ADDR): Define.
2896         (FIVE_ARG_PTRACE): Likewise.
2897         (CANNOT_STORE_REGISTER): Likewise.
2898         (NEED_TEXT_START_END): Likewise.
2899
2900         * tm-hppah.h (NEED_TEXT_START_END): Delete definition.
2901         * xm-hppah.h (KERNEL_U_ADDR): Delete definition.
2902         (FIVE_ARG_PTRACE): Likewise.
2903         * xm-hppab.h (KERNEL_U_ADDR): Delete definition.
2904         (FIVE_ARG_PTRACE): Likewise.
2905
2906         * hppa-tdep.c (read_unwind_info): Make static.
2907         (restore_pc_queue): Indirect through the target vector to
2908         reload the register state.
2909
2910 Sat Apr 16 22:20:51 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
2911
2912         * paread.c (compare_unwind_entries): Delete function.  It's been
2913         moved into hppa-tdep.c.
2914         (read_unwind_info): Likewise.
2915         (pa_symfile_read): No longer call read_unwind_info.  The unwind
2916         tables will be read in as they are needed.
2917
2918         * hppa-tdep.c (compare_unwind_entries): New function.
2919         (read_unwind_info, internalize_unwinds): Likewise.
2920         (find_unwind_entry): Read in unwind information on demand.
2921
2922 Fri Apr 15 11:53:46 1994  Stan Shebs  (shebs@andros.cygnus.com)
2923
2924         * source.c (DIRNAME_SEPARATOR): New macro, replaces all references
2925         to : in search path processing.
2926         * defs.h (qsort): Rename argument in prototype.
2927         * symtab.h (SAYMBOL_VALUE): Rename value field, avoids bugs in
2928         some compilers.
2929         * breakpoint.c, exec.c, mdebugread.c, mipsread.c, xcoffexec.c
2930         (false): Eliminate usages.
2931
2932 Fri Apr 15 11:35:19 1994  Steve Chamberlain  (sac@cygnus.com)
2933
2934         * h8500-tdep.c (initialize_h8500_tdep, large_command):
2935         All references to value changed to value_ptrlage_command is now
2936         called big_command.
2937         All references to value changed to value_ptr.
2938         * remote-e7000.c (e7000_wait): Use target_waitstatus and SETSTOP
2939         * remote-hms.c (hms_wait): Timeout after five seconds.
2940         * ser-go32.c (dosasync_read): Poll if timeout < 0.
2941         * config/tm/tm-h8500.h (BEFORE_MAIN_LOOP_HOOK): Deleted.
2942         * config/sh/tm-sh.h (BREAKPOINT): Is now sleep opcode.
2943
2944 Thu Apr 14 07:01:56 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
2945
2946         * procfs.c (procfs_wait): Protect watchpoint code with appropriate
2947         #ifdefs.
2948         (procfs_set_watchpoint, procfs_stopped_by_watchpoint): Likewise.
2949
2950 Wed Apr 13 14:52:46 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
2951
2952         * breakpoint.h (enum bptype): Add bp_hardware_watchpoint and
2953         bp_watchpoint_scope breakpoints.
2954         (struct breakpoint): Add val_chain and related_breakpoint fields
2955         for use by watchpoints.
2956
2957         * breakpoint.c (within_scope): Delete.  No longer used.
2958         (TARGET_CAN_USE_HARDWARE_WATCHPOINT): Provide default definition.
2959         (target_{remove,insert}_watchpoint): Likewise.
2960         (can_use_hardware_watchpoint): New function.
2961         (remove_breakpoint): New function to remove a single breakpoint
2962         or hardware watchpoint.
2963         (insert_breakpoints): Handle insertion of hardware watchpoints.
2964         Store a copy of the value chain derived from the watchpoint
2965         expression.
2966         (remove_breakpoints): Simplify by using remove_breakpoint.
2967         (delete_breakpoint): Likewise.
2968         (watchpoint_check): Delete the watchpoint and watchpoint scope
2969         breakpoints when the watchpoint goes out of scope.  Save & restore
2970         the current frame after checking watchpoints.
2971         (breakpoint_init_inferior): Likewise (restarting the program
2972         makes all local watchpoints go out of scope).
2973         (bpstat_stop_status): Handle hardware watchpoints much like normal
2974         watchpoints. Delete the watchpoint and watchpoint scope breakpoint
2975         when the watchpoint goes out of scope.  Remove and reinsert all
2976         breakpoints before returning if we stopped when a hardware watchpoint
2977         fired.
2978         (watch_command): Use a hardware watchpoint when possible.  If
2979         watching a local expression, build a scope breakpoint too.
2980         (map_breakpoint_numbers): Also call given function for any
2981         related breakpoints.
2982         (disable_breakpoint): Never disable a scope breakpoint.
2983         (enable_breakpoint): Handle hardware breakpoints much like normal
2984         breakpoints, but recompute the watchpoint_scope breakpoint's
2985         frame and address  (if we have an associated scope breakpoint).
2986         (read_memory_nobpt): Handle hardware watchpoints like normal 
2987         watchpoints.  When necessary handle watchpoint_scope breakpoints.
2988         (print_it_normal, bpstat_what, breakpoint_1, mention): Likewise.
2989         (clear_command, breakpoint_re_set_one, enable_command): Likewise.
2990         (disable_command): Likewise.
2991
2992         * blockframe.c (find_frame_addr_in_frame_chain): New function.
2993         Extern prototype added to frame.h
2994
2995         * infrun.c (wait_for_inferior): Set current_frame and select
2996         a frame before checking if we stopped due to a hardare watchpoint
2997         firing.  Handle stepping over hardware watchpoints.
2998         (normal_stop): Remove unnecessary call to select_frame.
2999
3000         * value.h (value_release_to_mark): Declare.
3001         * values.c (value_release_to_mark): New function.
3002
3003         * procfs.c (procfs_wait): Add cases for hardware watchpoints.
3004         (procfs_set_watchpoint, procfs_stopped_by_watchpoint): New functions.
3005
3006         * hppab-nat.c (hppa_set_watchpoint): New function.
3007
3008         * config/pa/nm-hppab.h (STOPPED_BY_WATCHPOINT): Define.
3009         (HAVE_STEPPABLE_WATCHPOINT): Define.
3010         (TARGET_CAN_USE_HARDWARE_WATCHPOINT): Define.
3011         (target_{insert,delete}_watchpoint): Define.
3012
3013         * config/mips/nm-irix4.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT): Define.
3014         (STOPPED_BY_WATCHPOINT, HAVE_NONSTEPPABLE_WATCHPOINT): Likewise.
3015         (target_{insert,remove}_watchpoint): Likewise.
3016
3017 Mon Apr 11 19:21:27 1994  Stu Grossman  (grossman at cygnus.com)
3018
3019         * xcoffread.c (read_xcoff_symtab):  Ignore symbols of class C_EXT,
3020         smtyp XTY_LD, sclass XMC_DS (external data segment label).  They
3021         often have the same names as debug symbols for functions, and
3022         confuse lookup_symbol().
3023
3024 Mon Apr 11 10:44:35 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
3025
3026         * remote.c: Around redefinition of PBUFSIZE, adjust whitespace.
3027         * config/pa/tm-hppa.h (REGISTER_BYTES): Use 4 rather than
3028         REGISTER_RAW_SIZE (1).
3029         Together these changes work around a bug in HP's compiler.  Both
3030         seem to be necessary.
3031
3032 Mon Apr 11 09:18:24 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
3033
3034         * paread.c (pa_symtab_read): Handle ST_STUB symbols and symbols
3035         with scope SS_EXTERNAL.  ST_ENTRY symbols in dynamic executables
3036         are type mst_solib_trampoline.
3037
3038 Fri Apr  8 17:14:37 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
3039
3040         * config/m68k/es1800.mt: Change comments.
3041
3042 Fri Apr  8 17:14:37 1994  Rob Savoye  (rob@darkstar.cygnus.com)
3043
3044         * config/m68k/monitor.mt (TDEPFILES): Don't include remote-es.o.
3045
3046 Fri Apr  8 15:35:30 1994  Stu Grossman  (grossman at cygnus.com)
3047
3048         * lynx-nat.c:  Restore regmap structure for SPARC.  It's needed
3049         for core files.
3050
3051 Fri Apr  8 14:53:35 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
3052
3053         * values.c (unpack_long): Remove obsolete comment about using a
3054         switch statement.
3055
3056         * symfile.c (symbol_file_command): Add comments about command syntax.
3057
3058 Thu Apr  7 17:25:21 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3059                           Jim Kingdon  (kingdon@cygnus.com)
3060
3061         * infrun.c (IN_SOLIB_TRAMPOLINE):  Correct comment, trampolines
3062         are in the .plt section.
3063         * minsyms.c (lookup_solib_trampoline_symbol_by_pc,
3064         find_solib_trampoline_target):  New functions for handling
3065         stepping into -g compiled shared libraries.
3066         * symtab.h (lookup_solib_trampoline_symbol_by_pc,
3067         find_solib_trampoline_target):  Add prototypes.
3068         * config/tm-sunos.h (IN_SOLIB_TRAMPOLINE, SKIP_TRAMPOLINE_CODE):
3069         Define to handle stepping into  -g compiled shared libraries.
3070         * config/tm-sysv4.h (SKIP_TRAMPOLINE_CODE):  Define to handle
3071         stepping into  -g compiled shared libraries.
3072
3073 Thu Apr  7 17:22:54 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3074
3075         * configure.in:  Add mips-*-sysv4* support.
3076         * config/mips/mipsv4.mh, config/mips/mipsv4.mt,
3077         config/mips/tm-mipsv4.h, config/mips/xm-mipsv4.h, mipsv4-nat.c:
3078         New files for MIPS SVR4 support.
3079         * Makefile.in:  Update for new mipsv4 files.
3080         * alpha-tdep.c (heuristic_proc_desc, find_proc_desc):  Use
3081         read_next_frame_reg to obtain the frame relative stack pointer.
3082         * mips-tdep.c (heuristic_proc_desc):  Use read_next_frame_reg to
3083         obtain the frame relative stack pointer.
3084         * mdebugread.c (parse_partial_symbols, psymtab_to_symtab1):
3085         Handle stStatic and stStaticProc symbols in stabs-in-ecoff output
3086         by entering them into the minimal symbol table.
3087         * printcmd.c (print_scalar_formatted):  Do not try to unpack to
3088         a long for float formats.
3089         * solib.c:  Include "elf/mips.h" only if DT_MIPS_RLD_MAP does not
3090         get defined in <link.h>.
3091         * solib.c (solib_add):  Add shared library sections to the section
3092         table of the target before adding the symbols.
3093         * partial-stab.h:  Relocate static and global functions.
3094         * dbxread.c (read_dbx_symtab):  Remove unused variable
3095         end_of_text_address.  Relocate text_addr when passing it
3096         to end_psymtab.
3097
3098         For Alpha OSF/1 targets, enable gdb to set breakpoints in shared
3099         library functions before the executable is run. Retrieve dynamic
3100         symbols from stripped executables.
3101         * mipsread.c (read_alphacoff_dynamic_symtab):  New function.
3102         * mipsread.c (mipscoff_symfile_read):  Use it. Issue warning message
3103         if no debugging symbols were found.
3104         * alpha-tdep.c (alpha_skip_prologue):  Silently return the unaltered
3105         pc if memory at the pc is not accessible and GDB_TARGET_HAS_SHARED_LIBS
3106         is defined.
3107         * config/alpha/nm-alpha.h (GDB_TARGET_HAS_SHARED_LIBS):  Define,
3108         OSF/1 has shared libraries.
3109
3110 Thu Apr  7 15:11:11 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3111
3112         * dbxread.c (read_dbx_dynamic_symtab): Adjust for recent changes
3113         to BFD handling of dynamic symbols.
3114
3115 Tue Apr  5 15:29:25 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
3116
3117         * hppa-tdep.c (hppa_fix_call_dummy): If FUN is a procedure label,
3118         then gets its real address into FUN and its GOT/DP value into %r19.
3119
3120         * tm-hppa.h (CALL_DUMMY): Use %r20, not %r19 as a temporary.
3121
3122         * hppa-tdep.c (frameless_function_invocation): If no unwind
3123         descriptor was found, then assume this was not a frameless
3124         function invocation.
3125         (frame_saved_pc): If the saved PC is in a linker stub, then
3126         return the return address which the linker stub will return to.
3127
3128         * xm-hppab.h: Never define USG.
3129         * xm-hppah.h: Always define USG.
3130
3131 Tue Apr  5 12:58:47 1994  Per Bothner  (bothner@kalessin.cygnus.com)
3132
3133         * values.c (unpack_long, value_from_longest),
3134         valarith.c (value_binop):  Allow TYPE_CODE_RANGE.
3135
3136 Fri Apr  1 14:04:34 1994  Jason Merrill  (jason@deneb.cygnus.com)
3137
3138         * symfile.c (deduce_language_from_filename): .cpp is a C++ extension.
3139
3140 Fri Apr  1 00:44:00 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3141
3142         For SVR4 targets, enable gdb to set breakpoints in shared
3143         library functions before the executable is run.
3144         * elfread.c (elf_symtab_read):  Handle symbols for shared library
3145         functions.
3146         * sparc-tdep.c (in_solib_trampoline):  Renamed to in_plt_section
3147         and moved to objfiles.c.
3148         * objfiles.c (in_plt_section):  Moved to here from sparc-tdep.
3149         * config/tm-sysv4.h (IN_SOLIB_TRAMPOLINE):  Use new in_plt_section.
3150         * config/sparc/tm-sun4sol2.h (IN_SOLIB_TRAMPOLINE):  Removed,
3151         the new generic definition from tm-sysv4.h works for Solaris.
3152
3153 Wed Mar 30 16:14:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3154
3155         * elfread.c (elf_symtab_read): Change storage_needed,
3156         number_of_symbols and i to long.  Rename get_symtab_upper_bound to
3157         bfd_get_symtab_upper_bound.  Check for errors from
3158         bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
3159         * nlmread.c (nlm_symtab_read): Same changes.
3160
3161 Wed Mar 30 11:43:29 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3162
3163         * xcoffread.c (xcoff_next_symbol_text): New function.
3164         (read_xcoff_symtab): Set next_symbol_text_func to it.
3165         Move raw_symbol outside of read_xcoff_symtab.
3166
3167         * remote.c (getpkt): Remove unused "out" label.
3168
3169 Wed Mar 30 09:15:42 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
3170
3171         * breakpoint.c (print_it_normal): Allow GDB to notify the user
3172         about more than one watchpoint being triggered.
3173
3174 Wed Mar 30 08:24:18 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3175
3176         * config/m68k/tm-dpx2.h: Include tm-m68k.h not nonexistent tm-68k.h.
3177
3178 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3179
3180         * blockframe.c (find_pc_partial_function):  mst_file_text
3181         symbols do not live in the shared library transfer table.
3182         * ch-exp.y (decode_integer_value, match_character_literal,
3183         match_bitstring_literal):  Guard tolower calls with isupper,
3184         tolower on old BSD systems blindly subtracts a constant.
3185         * dbxread.c (read_ofile_symtab):  Check for __gnu_compiled_* as
3186         well when determining the producer of the object file.
3187         * mdebugread.c (has_opaque_xref):  New function to check for
3188         cross reference to an opaque aggregate.
3189         * mdebugread.c (parse_symbol, parse_partial_symbols):  Do not
3190         enter typedefs to opaque aggregates into the symbol tables.
3191         * mdebugread.c (parse_external):  Remove skip_procedures argument,
3192         it has always been 1.  Remove code that handled stProc symbols,
3193         it was never executed and was wrong, as the index of a
3194         stProc symbol points to the local symbol table and not to the
3195         auxiliary symbol info. Update caller.
3196         * mdebugread.c (parse_partial_symbols):  Do not enter external
3197         stProc symbols into the partial symbol table, they are already
3198         entered into the minimal symbol table.
3199         * config/i386/tm-symmetry.h:  Clean up, it is now only used for Dynix.
3200         Remove all conditionals and definitions for ptx.
3201         I386_REGNO_TO_SYMMETRY moved to here from symm-tdep.c.
3202         Fix addresses of floating point registers in REGISTER_U_ADDR.
3203         STORE_STRUCT_RETURN now handles cc and gcc conventions.
3204         FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC,
3205         IN_SIGTRAMP, SIGCONTEXT_PC_OFFSET defined to make backtracing through
3206         signal trampoline code work.
3207         * config/i386/xm-symmetry.h:  Clean up, it is now only used for Dynix.
3208         Remove all conditionals and definitions for ptx.
3209         Remove KDB definitions.
3210         * symm-nat.c (store_inferior_registers):  Fetch registers before
3211         storing them to obtain valid floating point control registers.
3212         Store fpu registers.
3213         * symm-nat.c (print_1167_control_word):  Dynix 3.1.1 defines
3214         FPA_PCR_CC_C0 and FPA_PCR_CC_C1, avoid duplicate case value.
3215         * symm-nat.c (fetch_inferior_registers, child_xfer_memory):
3216         Fix typos.
3217         * symm-nat.c (child_resume):  Update type of `signal' parameter.
3218         * symm-tdep.c (I386_REGNO_TO_SYMMETRY):  Moved to tm-symmetry.h.
3219
3220 Tue Mar 29 23:01:33 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
3221
3222         * hppa-tdep.c (hppa_fix_call_dummy): Use an alternate method for
3223         calling import stubs for functions in shared libraries.
3224
3225 Tue Mar 29 21:14:04 1994  Per Bothner  (bothner@kalessin.cygnus.com)
3226
3227         * ch-exp.y:  Implement SIZE(mode_name) and SIZE(expression).
3228
3229         * ch-lang.c (chill_is_varying_struct):  Magic string is
3230         was "<var_length>" is now "__var_length" (more portable).
3231
3232 Tue Mar 29 19:41:34 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3233
3234         * remote.c (getpkt): If we get a timeout, actually retry rather
3235         than just giving up the first time it happens.
3236         * remote.c: Document sequence numbers.
3237         (remote_store_registers): Change syntax of 'P' request so that it
3238         never looks like a sequence number.
3239
3240 Tue Mar 29 16:06:01 1994  Kung Hsu  (kung@mexican.cygnus.com)
3241
3242         * os9kread.c (record_minimal_symbol): add section_offset to
3243         relocate minimal symbol table.
3244         * os9kread.c (read_minimal_symbols): ditto.
3245         * os9kread.c (os9k_symfile_init): increase size of dbg and stb
3246         file names.
3247         * os9kread.c (read_os9k_psymtab): if there's no dbg file, just
3248         return. Also if file addr is 0 leave it 0, not to relocate.
3249         * remote-os9k.c (_initialize_remote_os9k): add 'set remotexon',
3250         'set remotexoff' and 'set remotelog' commands.
3251
3252 Tue Mar 29 12:38:45 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3253
3254         * remote.c (remote_store_registers): Add 'P' request to set an
3255         individual register.
3256         (remote_write_bytes, remote_read_bytes): Use %lx, not %x, to print
3257         a target address.
3258
3259 Sat Mar 26 07:05:18 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3260
3261         * config/sparc/tm-sparc.h: Define USE_REGISTER_NOT_ARG.
3262         * stabsread (define_symbol): If USE_REGISTER_NOT_ARG, go back to
3263         combining all 'p' and 'r' pairs into a LOC_REGPARM.
3264
3265         * command.c (do_setshow_command, case var_string): Never add a
3266         space to the end of the string.
3267         * NEWS: Document this change.
3268         * .gdbinit: Add a space to the "set prompt" command.
3269
3270 Fri Mar 25 12:40:41 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3271
3272         *  m3-nat.c, i386m3-nat.c, config/i386/i386m3.mh: Many minor
3273         changes to make it compile (it doesn't link yet).
3274
3275         * buildsym.c (start_subfile, patch_subfile_names), demangle.c
3276         (set_demangling_style, set_demangling_command): Use savestring not
3277         strdup.  We were not dealing properly with a NULL return from
3278         strdup, and were not declaring strdup (the system header may or
3279         may not have it).
3280
3281         * valprint.c (val_print): Remove inaccurate comment about what
3282         types can be stub types.
3283
3284         * config/i386/ptx.mh (XDEPFILES): Add coredep.o.  Delete infptrace.o.
3285         * symm-nat.c (child_wait, _initialize_symm_nat, kill_inferior):
3286         Supply alternate version if ATTACH_DETACH is not defined.
3287         * ptx4-nat.c, config/i386/{nm-ptx4.h, ptx4.mh, ptx.mt, ptx4.mt,
3288         tm-ptx.h, tm-ptx4.h, xm-ptx.h, xm-ptx4.h}: New files.
3289         * configure.in: Recognize i[34]86-sequent-sysv4* host.
3290
3291 Fri Mar 25 10:14:03 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
3292
3293         * hppa-tdep.c (skip_prologue): Do nothing if not at the beginning
3294         of a function.
3295         (skip_trampoline_code): Rewrite and add support for argument
3296         relocation stubs stubs, import/export stubs, calls through
3297         "_sr4export" and cascaded trampolines.
3298
3299         * hppa-tdep.c (skip_prologue): Return "pc" not zero
3300         if no unwind descriptor is found.
3301
3302         * tm-hppa.h (NUM_REGS): Bump to 128 registers.
3303         (REGISTER_NAMES): Add entries for "right-half" of FP registers.
3304         (REGISTER_RAW_SIZE, MAX_REGISTER_RAW_SIZE): Do not treat FP regs
3305         differently.  All registers are four bytes.
3306         (REGISTER_BYTES, REGISTER_BYTE): Simplify now that all registers are
3307         the same size.
3308         (REGISTER_VIRTUAL_TYPE): Use builtin_type_float for all FP regs.
3309
3310         * hppa-tdep.c (pa_print_fp_reg): Update to print even numbered FP
3311         registers as both single and double values (fetching 2nd 32bit half
3312         as necessary).  Annotate each register printed with its precision.
3313
3314         * paread.c (read_unwind_info): Fix off-by-one error.
3315
3316 Fri Mar 25 08:33:28 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3317
3318         * main.c (complete_command): Deal with it if arg is NULL.
3319
3320 Thu Mar 24 07:12:09 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3321
3322         * config/mips/tm-mips.h (SETUP_ARBITRARY_FRAME): Revise comment
3323         regarding using the PC--using the PC is necessary and all the
3324         FIXME comments in the world won't make it go away.
3325
3326         * valops.c (value_at, value_at_lazy): Give error if we dereference
3327         a pointer to void.
3328         * gdbtypes.h: Fix comments regarding TYPE_CODE_VOID.
3329         * stabsread.c: Use 1, not 0, for TYPE_LENGTH of void types.
3330
3331         * stabsread.c (patch_block_stabs): Add comment about what happens
3332         if the definition is in another compilation unit from the stab.
3333
3334         * dbxread.c (end_psymtab): Add comment about empty psymtabs.
3335
3336 Wed Mar 23 07:50:33 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3337
3338         * main.c (complete_command): New command, from Rick Sladkey
3339         <jrs@world.std.com>.
3340         (symbol_completion_function): Don't declare rl_point and
3341         rl_line_buffer; they are now declared in readline.h.
3342         (show_commands): Don't declare history_base; it is declared in
3343         history.h.
3344         * command.c (lookup_cmd): Don't delete trailing whitespace.
3345         Reverts change of 14 May 1989.
3346
3347 Wed Mar 23 16:14:52 1994  Stu Grossman  (grossman at cygnus.com)
3348
3349         * minsyms.c (prim_record_minimal_symbol):  Move section deduction
3350         code from prim_record_minimal_symbol_and_info() to here.  Callers
3351         of the latter can legitimately supply a section number of -1.
3352
3353 Wed Mar 23 07:50:33 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3354
3355         * gdbtypes.h, gdbtypes.c: Add comments regarding whether static
3356         member functions have an element in args for a (nonexistent) this
3357         pointer.
3358
3359 Tue Mar 22 20:12:53 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
3360
3361         * config/pa/tm-hppao.h (NO_PC_SPACE_QUEUE_RESTORE): Define.
3362
3363         * hppa-tdep.c (hppa_pop_frame): Do not restore the PC space
3364         queue if NO_PC_SPACE_QUEUE_RESTORE is defined.
3365
3366         * stabsread.c (REG_STRUCT_HAS_ADDR): Accept additional argument
3367         for the structure's type.  All callers changed.
3368
3369         * valops.c (call_function_by_hand): Check REG_STRUCT_HAS_ADDR
3370         for each structure argument rather than assuming it's either
3371         true or false for all structure arguments.
3372
3373         * config/pa/tm-hppa.h (REG_STRUCT_HAS_ADDR): Depend only
3374         on the length structure passed, not the compiler used.
3375
3376         * config/sparc/tm-sparc.h (REG_STRUCT_HAS_ADDR): Accept additional
3377         argument for the structure's type.
3378
3379 Tue Mar 22 15:28:33 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3380
3381         * values.c (set_internalvar): Don't set var->value until we are
3382         sure there won't be an error().
3383
3384         * remote.c (get_offsets): Reinstate comment which was in
3385         remote_wait about use of SECT_OFF_TEXT and so on.
3386
3387 Mon Mar 21 13:11:30 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3388
3389         * symmisc.c (maintenance_check_symtabs):  New function to check
3390         consistency of psymtabs and symtabs.
3391         * symtab.h (maintenance_check_symtabs):  Add prototype.
3392         * maint.c:  Add new `maint check-symtabs' command.
3393         * config/i386/tm-i386aix.h, config/i386/tm-sun386.h,
3394         config/i386/tm-symmetry.h (REGISTER_CONVERT_TO_RAW):  Fix typo.
3395         * config/i386/tm-symmetry.h:  Make comment inside #if 0 a real
3396         comment.
3397         * config/i386/tm-symmetry.h (STORE_STRUCT_RETURN):  Cast argument
3398         to write_memory to avoid warnings from gcc.
3399         * config/i386/xm-symmetry.h:  Add missing #endif.
3400         * config/i386/nm-symmetry.h (NO_PTRACE_H):  Add for Dynix.
3401         * config/i386/symmetry.mt (TDEPFILES):  Add i386-tdep.o.
3402         * config/i386/symmetry.mh (NAT_FILE, NATDEPFILES):  Add.
3403
3404 Mon Mar 21 11:50:28 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
3405
3406         * hppa-tdep.c (hppa_fix_call_dummy): Use value_ptr.
3407         (hppa_push_arguments): Likewise.
3408
3409 Mon Mar 21 11:02:51 1994  Stu Grossman  (grossman at cygnus.com)
3410
3411         * alpha-tdep.c:  Gobs of changes (many imported from mips-tdep) to
3412         improve remote debugging efficiency.  Also fixed problems with
3413         doing function calls for programs with no entry points.
3414         * infcmd.c (run_stack_dummy):  Use CALL_DUMMY_ADDRESS instead of
3415         entry_point_address.
3416         * inferior.h (PC_IN_CALL_DUMMY):  ditto.
3417         * mdebugread.c (parse_symbol, parse_procedure, parse_external,
3418         parse_lines):  Pass section_offsets info to these routines so that
3419         we can relocate symbol table entries upon readin.
3420         * (psymtab_to_symtab_1):  Set symtab->primary to tell
3421         objfile_relocate to do relocations for our symbols.
3422         * (ecoff_relocate_efi):  New routine to relocate adr field of PDRs
3423         (which hang off of the symbol table).
3424         * Use prim_record_minimal_symbols_and_info instead of
3425         prim_record_minimal_symbols to supply section info to make minimal
3426         symbol relocations work.
3427         * minsyms.c (prim_record_minimal_symbols_and_info):  If section is
3428         -1, try to deduce it from ms_type.
3429         * objfiles.c (objfile_relocate):  Use ALL_OBJFILE_SYMTABS where
3430         appropriate.  Handle relocation of MIPS_EFI symbols special. Also,
3431         add code to relocate objfile->sections data structure.
3432         * remote.c (get_offsets):  Use new protocol message to acquire
3433         section offsets from the target.
3434         * (remote_wait):  Get rid of relocation stuff.  That's all handled
3435         by objfile_relocate now.
3436         * config/alpha/alpha-nw.mt (TM_FILE):  Use tm-alphanw.h.
3437         * config/alpha/tm-alpha.h:  Define CALL_DUMMY_ADDRESS, and
3438         VM_MIN_ADDRESS.
3439         * config/alpha/tm-alphanw.h:  DECR_PC_AFTER_BREAK=0, VM_MIN_ADDRESS=0.
3440
3441 Sun Mar 20 15:21:57 1994  Doug Evans  (dje@cygnus.com)
3442
3443         * sparc-tdep.c (sparc_frame_find_save_regs): Use REGISTER_RAW_SIZE
3444         instead of 4.
3445         * sp64-tdep.c (target_ptr_bit, set_target_ptr_bit): Deleted,
3446         can no longer set this at run time.
3447         * config/sparc/sp64.mt (SIMFILES): Use remote-sim.o now.
3448         (TM_CLIBS): Define to -lm, the simulator uses the sqrt() function.
3449         * config/sparc/tm-sp64.h (FPS_REGNUM, CPS_REGNUM): Define (so
3450         sparc-tdep.c compiles).
3451         (TARGET_PTR_BIT): Must be a constant now, fix at 64.
3452
3453 Sat Mar 19 08:51:12 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3454
3455         * config/m68k/{cisco.mt,tm-cisco.h}: New files.
3456         * Makefile.in (ALLPARAM, ALLCONFIG): Add them.
3457         * configure.in: Recognize m68*-cisco*-*.
3458
3459         * Makefile.in (TAGS): Use variables directly, rather than using
3460         find, to locate TM_FILE, XM_FILE, and NAT_FILE.  This is faster
3461         and means that these filenames no longer need be unique across all
3462         the config/* directories.
3463         * configure.in: Put the config/*/ into TM_FILE, etc.
3464
3465         * m68k-stub.c (computeSignal): Return SIGFPE, not SIGURG, for chk
3466         and trapv exceptions.
3467
3468         * target.h (struct section_table), objfiles.h (struct obj_section):
3469         Change name of field sec_ptr to the_bfd_section.  More mnemonic
3470         and avoids the (sort of, for the ptx compiler) name clash with
3471         the name of the typedef.
3472         * exec.c, xcoffexec.c, sparc-tdep.c, rs6000-nat.c, osfsolib.c,
3473         solib.c, irix5-nat.c, objfiles.c, remote.c: Change users.
3474
3475         * utils.c: Include readline.h.
3476         * Makefile.in (utils.o): Add dependency.
3477
3478         * remote.c (getpkt): Add support for run-length encoding.
3479
3480 Fri Mar 18 19:11:15 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
3481
3482         * utils.c (prompt_for_continue): Call readline, not gdb_readline.
3483
3484 Fri Mar 18 10:25:55 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3485
3486         * dstread.c (record_minimal_symbol): New arg objfile.  Pass it to
3487         prim_record_minimal_symbol.
3488         Callers: Pass it.
3489
3490         * regex.c (EXTEND_BUFFER): Adjust pointers within buffer by
3491         computing their offset from the start of the old buffer and adding
3492         to the new buffer, rather than by assuming we can add the
3493         difference between the old buffer and the new buffer (it might not
3494         fit in an int).  Merge in cosmetic differences from emacs regex.c
3495         version of this macro.
3496
3497 Wed Mar 16 15:28:54 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3498
3499         * Makefile.in (install-only): Fix use of program_transform_name.
3500
3501 Wed Mar 16 07:18:43 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3502
3503         * printcmd.c: Remove "set print fast-symbolic-addr off" command.
3504         The bug which it worked around was fixed on 25 Feb 94 in coffread.c,
3505         so I'm nuking the command.
3506         * symtab.c (find_addr_symbol): Comment out, no longer used.
3507
3508         * main.c (main): Don't init_source_path for the -cd argument.  Now
3509         that source_path doesn't contain the current_directory from when
3510         GDB started up, init_source_path is no longer useful (and is
3511         harmful because it clobbers a source_path set in $HOME/.gdbinit).
3512
3513         * TODO: Remove item about line numbers being off.  It is useless
3514         and confusing without a reproducible test case (it mentions
3515         proceed(), but I was able to step through proceed without trouble).
3516
3517 Tue Mar 15 13:39:23 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3518
3519         For Sunos 4.x targets, enable gdb to set breakpoints in shared
3520         library functions before the executable is run. Retrieve dynamic
3521         symbols from stripped executables.
3522         * symtab.h (minimal_symbol_type):  Add mst_solib_trampoline type.
3523         * parse.c (write_exp_msymbol), symmisc.c (dump_msymbols),
3524         symtab.c (list_symbols):  Handle mst_solib_trampoline.
3525         * minsyms.c (lookup_minimal_symbol):  Handle mst_solib_trampoline
3526         for all targets, remove IBM6000_TARGET dependencies.
3527         * dbxread.c (read_dbx_dynamic_symtab):  New function.
3528         * dbxread.c (dbx_symfile_read):  Use it.
3529         * dbxread.c (SET_NAMESTRING):  Set namestring to
3530         "<bad string table index>" instead of "foo" if the string index is
3531         corrupt.
3532         * xcoffread.c (read_xcoff_symtab):  Use mst_solib_trampoline instead
3533         of mst_unknown.
3534         * symtab.c (list_symbols):  Take from_tty as parameter and pass it
3535         to break_command. Handle mst_file_* minimal symbol types.
3536         * config/i386/tm-i386bsd.h: Give just macro name, not args, to #undef.
3537
3538 Tue Mar 15 11:40:43 1994  Kung Hsu  (kung@mexican.cygnus.com)
3539
3540         * c-exp.y(yylex): fix potential memory overflow.
3541
3542 Tue Mar 15 10:33:28 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3543
3544         * environ.c (set_in_environ): Eliminate special handling of PATH and
3545         GNUTARGET.
3546         * putenv.c: Removed, conflicts with system declaration of
3547         putenv on RS/6000 running AIX 3.2.5, and above change makes it
3548         unnecessary. 
3549         * Makefile.in: Change accordingly.
3550         * procfs.c (procfs_create_inferior): Change comment accordingly.
3551
3552 Tue Mar 15 10:05:27 1994  Jim Kingdon  (kingdon@cygnus.com)
3553
3554         * rs6000-tdep.c: Change value to value_ptr.
3555
3556 Sun Mar 13 09:45:51 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3557
3558         * i386m3-nat.c: Include floatformat.h.
3559         (get_i387_state): Use memset not bzero.
3560
3561         * Version 4.12.3.
3562
3563         * Makefile.in: Enable commented out getopt_h, bfd_h, etc.  Change
3564         ieee-float.h to floatformat.h.
3565
3566         * valprint.c (val_print_string): Ignore error if the error
3567         happened after a terminating '\0'.
3568
3569         * c-valprint.c (c_val_print): Never add 1 to return value from
3570         val_print_string; just return what it returns.
3571
3572         * target.h (enum target_signal): Add TARGET_SIGNAL_FIRST, for
3573         looping through all of the enums.
3574         * infrun.c (signals_info): Use it.
3575
3576 Fri Mar 11 08:08:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3577
3578         * main.c (main): When printing warning about bad baud rate, don't
3579         use warning(); it relies on current_target which isn't set up yet.
3580
3581         * breakpoint.c (_initialize_breakpoint): Update docstring for
3582         tbreak to match what the code actually does.  Don't mention tbreak
3583         in docstrings for "enable once" or "enable breakpoints once".
3584
3585 Thu Mar 10 08:52:38 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3586
3587         * symfile.h (ADD_PSYMBOL_VT_TO_LIST): Don't put a semicolon after
3588         while (0).  That defeats the whole purpose of using do . . . while (0).
3589         * mdebugread.c (parse_partial_symbols): Don't use ?: expression as
3590         list for ADD_PSYMBOL_TO_LIST; the macro takes its address and
3591         using a ?: expression as an lvalue is not portable.
3592
3593         * stabsread.c (define_symbol): If REG_STRUCT_HAS_ADDR, also
3594         convert a LOC_ARG to a LOC_REF_ARG.  Update code which combines
3595         'p' and 'r' symbol descriptors into a single symbol to look for a
3596         LOC_REF_ARG.
3597         * README, config/sparc/tm-sparc.h: Update comments.
3598
3599 Wed Mar  9 21:43:24 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3600
3601         * mdebugread.c (parse_type):  Do not complain for types with
3602         an `indexNil' aux index, these are simply undefined types.
3603         Remove indexNil check from caller of parse_type.
3604         * mdebugread.c (parse_partial_symbols):  Do not enter
3605         stGlobal, scCommon symbols into the minimal symbol table, their
3606         value is the size of the common, not its address.
3607         Handle scInit, scFini, scPData and scXData sections.
3608         Use minimal symbol type mst_file_* for stLabel symbols, instead of
3609         mst_*.
3610         Enter stProc symbols into the global_psymbols list once, not into
3611         the static_psymbols_list.
3612         Get rid of dummy psymtab if it is empty, to allow proper detection
3613         of stripped executables.
3614         * mdebugread.c (cross_ref):  Allow cross references to Fortran
3615         common blocks.
3616
3617 Wed Mar  9 15:23:19 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3618
3619         * stabsread.c (common_block_end, fix_common_block): Stash the
3620         struct pending * in the SYMBOL_TYPE, not the SYMBOL_NAMESPACE, so
3621         as to not assume that a pointer fits in an enum.
3622
3623 Wed Mar  9 18:56:36 1994  Kung Hsu  (kung@mexican.cygnus.com)
3624
3625         * os9kread.c (fill_sym): check compiler verion number for pre-
3626         UltraC compiler.
3627         * os9kread.c (os9k_process_one_symbol): address of symbol is
3628         relative to section not module.
3629         * stabsread.c (define_symbol): add symbol type 's' as local
3630         symbol for os9k.
3631         * remote-os9k.c: add command 'set monitor_log' to turn on or off
3632         monitor logging.
3633         * remote-os9k.c: fix bug in delete breakpoint, single step trace.
3634         * remote-os9k.c: fix bug in 'set remotebaud' function.
3635         * remote-os9k.c (rombug_link): minimize checking so to improve
3636         speed.
3637         * symfile.c (symbol_file_command): check if failed to link, also make
3638         the command be able to accept more than one filenames.
3639         * target.c (target_link): check if failed to link with rombug.
3640         * config/i386/tm-i386os9k.h : add #define DECR_PC_AFTER_BREAK 0.
3641
3642 Wed Mar  9 15:23:19 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3643
3644         * remote-es.c (es1800_child_ops): Don't declare it static.
3645
3646 Tue Mar  8 11:42:39 1994  Jim Kingdon  (kingdon@cygnus.com)
3647
3648         * config/i386/tm-i386v4.h: Give just macro name, not args, to #undef.
3649
3650 Tue Mar  8 06:56:13 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3651
3652         * dbxread.c: New variable lowest_text_address.
3653         (record_minimal_symbol, read_dbx_symtab): Set it.
3654         (read_dbx_symtab): Use lowest_text_address + text_size instead of
3655         end_of_text_address.
3656         * config/gould/tm-pn.h: Add comment regarding END_OF_TEXT_DEFAULT.
3657
3658         * dbxread.c (end_psymtab): Remove old and commented out
3659         capping_global and capping_static.  Fix comments regarding
3660         N_SO_ADDRESS_MAYBE_MISSING to match the real name of the macro.
3661
3662         * parser-defs.h: Add "extern" to start of variable declarations so
3663         we don't end up with commons.
3664         * parse.c: Define these variables.
3665
3666         * irix5-nat.c (find_solib): Cast o_path to CORE_ADDR when using it
3667         as one.
3668
3669 Mon Mar  7 13:00:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3670
3671         * alpha-tdep.c: Change value to value_ptr.
3672
3673 Sun Mar  6 17:36:53 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3674
3675         * solib.c (elf_locate_base):  New function to locate the address
3676         of the dynamic linker's runtime structure in the dynamic info section.
3677         * solib.c (locate_base):  Use it instead of iterating over the list
3678         of mapped address segments.
3679         * solib.c (look_for_base, bfd_lookup_symbol):  Removed, no longer
3680         necessary.
3681
3682 Fri Mar  4 09:50:47 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
3683
3684         * hppa-tdep.c (pc_in_linker_stub): Move decl to beginning of file.
3685         (pc_in_interrupt_handler): New function.  Also add PARAM decl.
3686         (find_proc_framesize): Deal with HPUX setting SAVE_SP bit for
3687         signal trampoline and interrupt routines.
3688         (frame_saved_pc): Handle signal trampolines and interrupt routines.
3689         (frame_chain, frame_chain_valid): Likewise.
3690         (hppa_frame_find_saved_regs): Likewise.  Also deal with special
3691         saved regs convention for SP.
3692         
3693         * tm-hppa[bho].h: FRAME_FIND_SAVED_PC_IN_SIGTRAMP): Define.
3694         (FRAME_BASE_BEFORE_SIGTRAMP): Define.
3695         (FRAME_FIND_SAVED_REGS_IN_SIGTRAMP): Define.
3696
3697         * tm-hppah.h (IN_SIGTRAMP): Define.
3698
3699 Thu Mar  3 12:41:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
3700
3701         * ch-exp.y (match_simple_name_string): Accept '_' as well as an
3702         alphabetic character as the start of a name.
3703
3704         * sparclite/Makefile.in (all install): Build and install aload.
3705
3706         * configure.in: Accept i[34]86-*-*sysv32 because that is what
3707         config.guess and config.sub produce.
3708
3709         * mips-tdep.c: Change value to value_ptr.
3710
3711 Wed Mar  2 09:17:55 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
3712
3713         * breakpoint.c, breakpoint.h, c-valprint.c, ch-valprint.c,
3714         cp-valprint.c, eval.c, expprint.c, findvar.c, language.c,
3715         objfiles.h, infcmd.c, printcmd.c, stack.c, typeprint.c,
3716         valarith.c, valops.c, valprint.c, value.h, values.c: Replace
3717         value with value_ptr.  This is for the ptx compiler.
3718         * objfiles.h, target.h: Don't declare a "sec_ptr" field using a
3719         "sec_ptr" typedef.
3720         * symm-nat.c: Add a bunch of stuff for symmetry's ptrace stuff.
3721         #if 0 i386_float_info.
3722         * symm-tdep.c (round): Remove.  Also remove sgttyb.
3723         * symm-tdep.c: Remove lots of stuff which duplicates stuff from
3724         i386-tdep.c.  Remove register_addr and ptx_coff_regno_to_gdb.
3725         * i386-tdep.c (i386_frame_find_saved_regs): Put in
3726         I386_REGNO_TO_SYMMETRY check in case it is needed for Dynix
3727         someday.
3728         * config/i386/nm-symmetry.h: Change KERNEL_U_ADDR.  Move
3729         stuff from PTRACE_READ_REGS, PTRACE_WRITE_REGS macros to
3730         symm-nat.c.  Define CHILD_WAIT and declare child_wait().
3731         * config/i386/tm-symmetry.h: Remove call function stuff; stuff in
3732         tm-i386v.h is apparently OK.
3733         * config/i386/xm-symmetry.h [_SEQUENT_]: Define HAVE_TERMIOS not
3734         HAVE_TERMIO.  Define MEM_FNS_DECLARED, NEED_POSIX_SETPGID, and
3735         USE_O_NOCTTY.
3736
3737 Wed Mar  2 11:31:08 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3738
3739         * osfsolib.c (xfer_link_map_member): Update to use new
3740         target_read_string interface.
3741
3742 Wed Mar  2 09:17:55 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
3743
3744         * infrun.c (wait_for_inferior): In checking
3745         remove_breakpoints_on_following_step, check
3746         through_sigtramp_breakpoint as well as step_resume_breakpoint.
3747
3748 Tue Mar  1 16:22:56 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
3749
3750         * os9kread.c (os9k_process_one_symbol): Rename
3751         VARIABLES_INSIDE_BLOCK to OS9K_VARIABLES_INSIDE_BLOCK.
3752         * symfile.c (symbol_file_command): Check for (CORE_ADDR)-1, not
3753         (CORE_ADDR)0, from target_link, since that is what it uses.
3754         Process name at end, not during parsing (like we did before Kung's
3755         change), so that -readnow and -mapped can appear anywhere.
3756         Make text_relocation a local variable.
3757         * config/i386/i386os9k.mt: Fix comment.
3758         * Makefile.in (ALLDEPFILES): Add remote-os9k.c.
3759         * os9kread.c: Put "comments" after #endif inside /* */.
3760         * stabsread.h: Add os9k_stabs variable.
3761         * stabsread.c (start_stabs), os9kread.c (os9k_process_one_symbol):
3762         Set it.
3763         * stabsread.c (define_symbol): If os9k_stabs, put a 'V' symbol
3764         descriptor in global_symbols not local_symbols.
3765         (read_type): If os9k_stabs, accept 'c', 'i', and 'b' type
3766         descriptors.
3767         (read_type): If os9k_stabs, accept function parameters after 'f'
3768         type descriptor.
3769         (read_array_type): If os9k_stabs, don't expect index type and
3770         expect lower and upper to be separated by ',' not ';'.
3771         (read_enum_type): If os9k_stabs, read a number before the first
3772         enumeration constant.
3773         (os9k_init_type_vector): New function.
3774         (dbx_lookup_type): Call it when starting new type vector.
3775         * config/i386/tm-i386os9k.h: Define BELIEVE_PCC_PROMOTION.
3776         * (os9k_process_one_symbol): Call define_symbol not os9k_define_symbol.
3777         * os9kstab.c: Removed.
3778         * Makefile.in: Update accordingly.
3779         * objfiles.c (objfile_relocate_data): Removed.
3780         * remote-os9k.c (rombug_wait): Call objfile_relocate
3781         not objfile_relocate_data.
3782         * objfiles.h, objfiles.c: Remove find_pc_objfile.
3783         * remote-os9k.c (rombug_wait): Call find_pc_section not
3784         find_pc_objfile.
3785         * main.c (quit_command): Check inferior_pid; revert Kung change.
3786         * remote-os9k.c (rombug_create_inferior): Set inferior_pid.
3787
3788 Tue Mar  1 14:56:14 1994  Kung Hsu  (kung@mexican.cygnus.com)
3789
3790         * os9kread.c: New file to read os9000 style symbo table.
3791         * os9kstab.c: new file to read os9000 style stabs.
3792         * remote-os9k.c: remote protocol talking to os9000 rombug monitor.
3793         * objfiles.c (find_pc_objfile): new function to search objfile
3794         from pc.
3795         * objfiles.c (objfile_relocate_data): new function to relocate
3796         data symbols in symbol table.
3797         * objfiles.h: Add two aux fields in struct objfile to handle
3798         multiple symbol table files situation like in os9000.
3799         * symfile.c: Change so 'symbol-file' command can handle multiple
3800         files. Also call target_link() to get relocation infos.
3801         * target.c (target_link): new function to get relocation info when
3802         a symbol file is requested to load.
3803         * main.c (quit_command): take out 'inferior_pid != 0' condition,
3804         because in cross mode there's no inferior pid, bit they need to
3805         be detached.
3806         Makefile.in: add os9kread.c os9kstab.c and .o's.
3807         configure.in: add i386os9k target.
3808         config/i386/i386os9k.mt: new add.
3809         config/i386/tm-i386os9k.h: new add.
3810
3811 Tue Mar  1 13:16:10 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3812
3813         * config/sparc/tm-sun4sol2.h (IN_SIGTRAMP):  Handle ucbsigvechandler.
3814         * sparc-tdep.c (sparc_frame_saved_pc):  Handle ucbsigvechandler.
3815
3816 Tue Mar  1 11:54:11 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
3817
3818         * target.c, target.h (target_read_string): Provide error detection to
3819         caller.  Put string in malloc'd space, so caller need not impose
3820         arbitrary limits.
3821         * solib.c (find_solib): Update to use new interface.
3822         * irix5-nat.c (find_solib): Read o_path from inferior
3823         (clear_solib): Free storage for o_path.
3824         * valprint.c (val_print_string): Add comments.
3825
3826 Mon Feb 28 23:54:39 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3827
3828         * symtab.c (decode_line_1):  Handle the case when skip_quoted does not
3829         advance `p'.
3830
3831 Mon Feb 28 12:40:46 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
3832
3833         * value.h (struct value): Add modifiable field.
3834         * values.c (allocate_value, record_latest_value, value_copy): Set it.
3835         (record_latest_value): Don't mess with VALUE_LVAL of value.
3836         * valops.c (value_assign): Check it.  Reword existing error
3837         message on not_lval.
3838
3839         * mips-tdep.c (mips_step_skips_delay), config/mips/tm-mips.h
3840         (STEP_SKIPS_DELAY): Added.
3841         * infrun.c (proceed) [STEP_SKIPS_DELAY]: Check for a breakpoint in
3842         the delay slot.
3843
3844         * valprint.c (val_print_string): If errcode is set, always print
3845         an error, regardless of force_ellipsis.  In the non-EIO case,
3846         just print the error message rather than calling error().  Don't
3847         access *(bufptr-1) if bufptr points to the start of the buffer.
3848         When looking for '\0', don't increment bufptr and addr if bufptr
3849         started out already at limit.  If an error happens on fetching the
3850         first character, don't print the string.
3851
3852 Sun Feb 27 21:05:06 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
3853
3854         * config/m68k/tm-apollo68b.h: Remove HAVE_68881 define; it is
3855         obsolete. 
3856
3857         * i387-tdep.c, i386-tdep.c i386v-nat.c, i386aix-nat.c,
3858         i386m3-nat.c, config/m68k/tm-m68k.h, i960-tdep.c
3859         config/i960/tm-i960.h, remote-nindy.c, config/m88k/tm-m88k.h,
3860         m88k-tdep.c: Use floatformat.h instead of ieee-float.h.
3861         * sparc-tdep.c: Remove now-obsolete ieee-float.h stuff
3862         * findvar.c: Update comment regarding ieee-float.h.
3863
3864 Sun Feb 27 21:39:48 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3865
3866         * config/i386/tm-i386v4.h (I386V4_SIGTRAMP_SAVED_PC, IN_SIGTRAMP,
3867         FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC):
3868         Define to make backtracing through the various sigtramp handlers
3869         work.
3870         * i386-tdep.c (i386v4_sigtramp_saved_pc):  New routine to fetch
3871         the saved pc from ucontext on the stack for SVR4 signal handling.
3872
3873 Fri Feb 25 09:41:11 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
3874
3875         * remote.c, remote-mon.c, remote-utils.c, remote-utils.h,
3876         target.h, remote-es.c, remote-nindy.c: Don't set baud rate if
3877         baud_rate is -1.  Remove sr_get_baud_rate and sr_set_baud_rate;
3878         just use the global variable itself.  When printing baud rate,
3879         don't print a baud rate if baud_rate is -1.
3880
3881         * coffread.c (read_coff_symtab): Pass mst_file_* to
3882         record_minimal_symbol for C_STAT symbols.  Put C_EXT and C_STAT
3883         symbols in the minimal symbols regardless of SDB_TYPE.
3884
3885 Thu Feb 24 08:30:33 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
3886
3887         * breakpoint.h (enum bptype): New type bp_through_sigtramp.
3888         (bpstat_what_main_action): New code BPSTAT_WHAT_THROUGH_SIGTRAMP.
3889         * breakpoint.c (bpstat_what): Return BPSTAT_WHAT_THROUGH_SIGTRAMP
3890         if we hit a bp_through_sigtramp breakpoint.  Remove kludge which
3891         ignored bs->stop for a bp_step_resume breakpoint.
3892         * infrun.c (wait_for_inferior): Make a through_sigtramp_breakpoint
3893         which performs one (the check_sigtramp2 one) of the functions
3894         which had been handled by the step_resume_breakpoint.  For each
3895         use of the step_resume_breakpoint, make it still use the
3896         step_resume_breakpoint, use the through_sigtramp_breakpoint, or
3897         operate on both.
3898         Deal with BPSTAT_WHAT_THROUGH_SIGTRAMP return from bpstat_what.
3899         When setting the frame address of the step resume breakpoint, set
3900         it to the address for frame *before* the call instruction is
3901         executed, not after.
3902
3903         * mips-tdep.c (mips_print_register): Print integers using
3904         print_scalar_formatted rather than duplicating all the
3905         CC_HAS_LONG_LONG and so on.
3906         (mips_push_dummy_frame): Use read_register_gen rather than using
3907         read_register and then putting it back in target format with
3908         store_unsigned_integer.  If registers are more than 4 bytes, give
3909         an error rather than have some registers overwrite other
3910         registers.
3911         #if 0 unused include of opcode/mips.h.
3912
3913         * symfile.h: Don't declare arguments for coff_getfilename.
3914
3915         * defs.h: Revert Kung change regarding FORCE_LONG_LONG.
3916
3917 Thu Feb 24 08:06:52 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
3918
3919         * configure.in (hppa*-*-osf*): New configuration.
3920         * config/pa/hppaosf.mt: New target makefile fragment.
3921         * config/pa/tm-hppao.h: New target include file.
3922
3923 Thu Feb 24 04:29:19 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3924
3925         * exec.c (print_section_info):  Print entry point for exec_bfd only.
3926         * ser-unix.c (wait_for):  Fix typo in HAVE_TERMIO case.
3927         * dwarfread.c:  Remove second inclusion of <sys/types.h>, which
3928         causes problems if <sys/types.h> has no multiple inclusion protection.
3929
3930 Wed Feb 23 16:28:55 1994  Jeffrey A. Law  (law@cygnus.com)
3931
3932         * tm-hppa.h (CALL_DUMMY): Add two NOP instructions to the end of
3933         the call dummy to avoid kernel bugs in HPUX, BSD, and OSF1.
3934         (CALL_DUMMY_LENGTH): Changed accordingly.
3935
3936 Wed Feb 23 16:21:25 1994  Stu Grossman  (grossman at cygnus.com)
3937
3938         * sparc-stub.c (trap_low):  Make trap handler work for arbitrary
3939         numbers of register windows.
3940
3941         * sparclite/hello.c:  Add factorial function for testing.
3942         * salib.c:  Use macros instead of constants for I/O addresses to
3943         make 931 support easier.
3944         * sparclite.h:  Change constraint for LOC to "rJ" to force use of
3945         register in sta/lda instructions.
3946
3947 Wed Feb 23 10:39:18 1994  Jim Kingdon  (kingdon@rtl.cygnus.com)
3948
3949         * dbxread.c (process_one_symbol): Set
3950         block_address_function_relative for COFF like we do for ELF and SOM.
3951
3952 Sat Feb 19 03:17:32 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3953
3954         * mdebugread.c (new_psymtab):  Pass in section_offsets and set
3955         them in the pst.
3956         * mdebugread.c (handle_psymbol_enumerators):  New function to enter
3957         the enumerators of an ecoff enum into the partial symbol table.
3958         * mdebugread.c (parse_partial_symbols):  Call it.
3959         * symfile.c (reread_symbols):  Initialize objfile->*_psymbols.next.
3960         * symmisc.c (dump_psymtab):  Fix typo, clean up output of section
3961         offsets. Cast psymtab->read_symtab to PTR before passing it to
3962         gdb_print_address.
3963         * i386-tdep.c (i386_skip_prologue):  Skip over instructions that
3964         set up the global offset table pointer in pic compiled code.
3965         * config/mips/tm-mips.h (FIX_CALL_DUMMY):  For big endian targets,
3966         error() on TYPE_CODE_FLT arguments whose size is greater than 8,
3967         swap all other TYPE_CODE_FLT arguments as mips_push_arguments
3968         ensures that floats are promoted to doubles before they are pushed
3969         on the stack.
3970
3971 Fri Feb 18 23:12:59 1994  Stu Grossman  (grossman at cygnus.com)
3972
3973         * sparclite/Makefile.in, sparclite/salib.c, sparclite/sparclite.h:
3974         Fixup cache_on and flush_i_cache so that they work for both the
3975         930 and 932 processors.  Rewrite most low level funcs (uart
3976         access & cache stuff) to use new ASI access macros in sparclite.h.
3977         Also make it easy to access second serial port.
3978
3979 Fri Feb 18 22:17:33 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3980
3981         * hp300ux-nat.c: Don't incloude <sys/dir.h>, <sys/ioctl.h>, or
3982         <sys/stat.h>; not needed.
3983
3984 Fri Feb 18 08:26:29 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3985
3986         * stack.c (print_frame_info): In "pathological" case, don't
3987         distrust the line number information.
3988
3989 Fri Feb 18 16:51:14 1994  Kung Hsu  (kung@mexican.cygnus.com)
3990
3991         * mips-tdep.c (mips_print_register): handle 64 bits register.
3992         * valprint.c (print_longest): fix a bug in printing 64 bits value.
3993
3994 Fri Feb 18 08:26:29 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3995
3996         * Version 4.12.2.
3997
3998         * Makefile.in (install): Do the sed for program_transform_name
3999         ourselves instead of worrying about INSTALL_XFORM.  This enables
4000         users to override INSTALL_PROGRAM in the standard way.
4001
4002         * Makefile.in (c-exp.tab.o, ch-exp.tab.o, m2-exp.tab.o): Don't
4003         depend on Makefile.in.
4004
4005         * defs.h, valprint.c: Make longest_to_int a function not a macro.
4006         Only test against INT_MIN if a LONGEST is bigger than an int.
4007
4008         * README: Change GhostScript to Ghostscript.
4009
4010 Fri Feb 18 07:30:55 1994  Jim Kingdon  (kingdon@cygnus.com)
4011
4012         * config/rs6000/{tm-rs6000lynx.h,nm-rs6000lynx.h,xm-rs6000lynx.h}:
4013         Rename to tm-rs6000ly.h, nm-rs6000ly.h, xm-rs6000ly.h for 14
4014         character file names.
4015         * Makefile.in (ALLPARAM): Add these files.
4016
4017         * config/mips/littlemips64.mt: Rename to mipsel64.mt for 14
4018         character file names.
4019         * Makefile.in: Add Kung's new mips64 files.
4020
4021 Thu Feb 17 17:25:47 1994  Kung Hsu  (kung@mexican.cygnus.com)
4022
4023         * configure.in: add mips64-*-elf, mips64-*-ecoff, mips64el-*-elf,
4024         mips64el-*-ecoff and mips64-big-*.
4025         * defs.h: get rid of FORCE_LONG_LONG.
4026         * mips-tdep.c (mips_find_saved_regs): add sd and sdc1 instruction
4027         parsing. Change register size to be MIPS_REGSIZE.
4028
4029 Thu Feb 17 09:30:22 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
4030
4031         * corelow.c, exec.c, irix5-nat.c, mipsread.c, objfiles.c, 
4032         osfsolib.c, rs6000-nat.c, solib.c, symfile.c, utils.c, 
4033         xcoffexec.c: Use bfd_get_error and bfd_set_error and new error names.
4034
4035 Fri Feb 11 21:47:24 1994  Steve Chamberlain  (sac@sphagnum.cygnus.com)
4036
4037         * remote-hms.c (readchar, hms_open, hms_fetch_register): Made more robust.
4038         (remove_commands, add_commands): Add/remove hms-drain when target
4039         is connected.
4040
4041 Fri Feb 11 16:11:38 1994  Stu Grossman  (grossman at cygnus.com)
4042
4043         * configure.in:  Add Lynx/rs6000 support.
4044         * lynx-nat.c:  Clean up some Sparc stuff.  Clean up ptrace error
4045         messages.  Add rs6000 support.  Don't try to modify unwritable
4046         registers.
4047         * rs6000-nat.c:  Move lots of native dependent stuff (like core
4048         file support) from rs6000-tdep.c & xcoffexec.c to here.
4049         * rs6000-tdep.c:  Move native dependent stuff to nat.c.
4050         * xcoffexec.c:  Move native dependent stuff to nat.c.
4051         * config/rs6000/nm-rs6000.h:  Move defs of SOLIB_* macros to here
4052         from tm file.
4053         * config/rs6000/tm-rs6000.h:  Remove defs of SOLIB_* funcs, cuz they're
4054         really native.
4055         * config/rs6000/tm-rs6000lynx.h, config/rs6000/xm-rs6000lynx.h:
4056         New files to support Lynx/rs6000.
4057
4058 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4059
4060         * README:  Remove note about gcc warnings on alpha, these should be
4061         gone now.
4062         * c-exp.y, ch-exp.y, core.c, corelow.c, eval.c, fork-child.c, 
4063         m2-exp.y, minsyms.c, nlmread.c, parse.c, putenv.c, regex.c
4064         remote-utils.c, stabsread.c:  Include <string.h>.
4065         * regex.c:  Include "defs.h", change re_comp argument to const char *.
4066         * infptrace.c (fetch_register, store_inferior_registers):  Change
4067         regaddr to type CORE_ADDR.
4068         * config/alpha/alpha-nw.mt, config/alpha/alpha-osf1.mt (MT_CFLAGS):
4069         Remove, no longer necessary now that we use bfd_vma for a CORE_ADDR.
4070
4071 Mon Feb  7 09:21:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4072
4073         * symtab.h: Always define BYTE_BITFIELD to nothing.
4074
4075 Mon Feb  7 08:44:17 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
4076
4077         * config/m68k/{m68k-em.mt,tm-m68k-em.h}: Remove; no longer used.
4078         * configure.in: Remove comment about m68k-em.mt.
4079         * Makefile.in: Remove references.
4080
4081 Mon Feb  7 08:22:42 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4082
4083         * defs.h [BFD64]: Use BFD_HOST_64_BIT, not nonexistent
4084         BFD_HOST_64_TYPE.
4085
4086 Sun Feb  6 06:55:15 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4087
4088         * target.c (target_preopen): If target_kill doesn't remove the
4089         target from the stack, use pop_target to do it.
4090
4091         * coffread.c (process_coff_symbol, case C_TPDEF): Don't set name
4092         of TYPE_CODE_PTR or TYPE_CODE_FUNC types.  This parallels similar
4093         changes to stabsread.c from summer 1993.
4094
4095         * remote-udi.c (udi_files_info): If prog_name is NULL, just skip
4096         printing the program, rather than passing NULL to printf.
4097         (udi_detach): Set udi_session_id to -1 so that udi_close doesn't
4098         try to call UDIDisconnect again.  Print better message.
4099         (udi_kill): Just call UDIDisconnect ourselves, rather than doing
4100         it via udi_close.
4101         (udi_create_inferior): If udi_session_id is negative, open a new
4102         TIP rather than giving an error.
4103
4104         * config/mips/mipsm3.mh, config/i386/i386m3.mh,
4105         config/ns32k/ns32km3.mh: Define NAT_FILE.
4106         * config/nm-m3.h: Change guard from _OS_MACH3_H_ and _OS_MACH3_H
4107         (it was inconsistent and namespace-wrong) to NM_M3_H.
4108         * m3-nat.c (mach_really_wait): Change parameter name to ourstatus.
4109         (m3_open): New function.
4110         (m3_ops): Use it.
4111         * TODO: Update Mach section.
4112
4113         * Makefile.in: Remove "rapp" stuff; it is superseded by gdbserver.
4114
4115 Sun Feb  6 13:26:21 1994  Per Bothner  (bothner@kalessin.cygnus.com)
4116
4117         * printcmd.c (printf_command):  Add missing single-letter
4118         backslash-escape sequences, and improve error message.
4119
4120 Sun Feb  6 06:55:15 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4121
4122         * corelow.c (solib_add_stub, core_open): Pass address of from_tty
4123         rather than trying to shove an int into a pointer and back out
4124         again.  This avoids compiler warnings.
4125
4126         * defs.h (alloca): Declare as void *, not char *, on hpux.
4127         Don't prototype it, just declare the return type.
4128
4129 Sun Feb  6 03:25:41 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4130
4131         * config/i386/tm-sun386.h, config/i386/tm-symmetry.h
4132         (REGISTER_CONVERT_TO_RAW):  Add missing backslash.
4133
4134 Sat Feb  5 08:03:41 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4135
4136         * remote-mips.c (mips_fetch_registers): If regno is FP_REGNUM or
4137         ZERO_REGNUM, just read it as zero without talking to the board.
4138
4139         * config/i386/tm-i386aix.h (REGISTER_CONVERT_TO_RAW): Add missing
4140         backslash.
4141         * i386-tdep.c (i386_extract_return_value): Pass TYPE_LENGTH (type)
4142         to store_floating, not nonexistent variable len.
4143
4144         * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
4145         New functions.
4146         (mips_store_word): Change calling convention to return errors, and
4147         to provide old contents if the caller wants it.
4148         (mips_xfer_memory): Deal with errors from mips_store_word.
4149         * config/mips/tm-idt.h, config/mips/tm-idtl.h: Remove BREAKPOINT
4150         define now that remote-mips.c doesn't use BREAKPOINT.
4151
4152         * remote-mips.c (mips_create_inferior): Call warning if arguments
4153         specified, and then execute "set args" command.  Call error, not
4154         mips_error, if executable file not specified.
4155
4156         * remote-e7000.c: Replace "snoop" command (e7000_noecho) with
4157         remote_debug.
4158
4159         * config/rs6000/tm-rs6000.h (STORE_STRUCT_RETURN): Don't cast
4160         to unsigned int.
4161
4162 Sat Feb  5 05:27:05 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4163
4164         * value.h (print_longest):  Rename "value" to "val" in prototype
4165         declaration because some compilers don't like arguments whose
4166         names are the same as types.
4167         * remote.c (remote_xfer_memory):  Cast "myaddr" to unsigned char *
4168         before passing it to remote_*_bytes.
4169
4170 Fri Feb  4 15:53:18 1994  Steve Chamberlain  (sac@cygnus.com)
4171
4172         * h8500-tdep.c (saved_pc_after_call): The size of the
4173         pc is memory model dependent. (segmented_command,
4174         unsegmented_command, _initialize_h8500_tdep): New commands to
4175         change memory model.
4176         * remote-e7000.c (_initialize_remote_e7000): Change name of snoop
4177         command.
4178         * remote-hms.c (hms_load): Remove breakpoints when loaded.
4179         (hms_wait): Use new status structure
4180         (hms_open): Push the target here. (hms_before_main_loop): Not
4181         here.  (supply_val, hms_fetch_register, hms_store_register):  Cope
4182         with H8/500 names too. (hms_fetch_register): Take out REGISTER_TYPE.
4183         * sh-tdep.c (show_regs, initialize_sh_tdep): New command to print
4184         all registers in a compact way.
4185
4186 Fri Feb  4 07:41:13 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
4187
4188         * config/rs6000/tm-rs6000.h: Declare rs6000_struct_return_address
4189         as CORE_ADDR to match definition in rs6000-tdep.c.
4190
4191 Fri Feb  4 01:14:20 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4192
4193         * dwarfread.c (process_dies):  Skip nested TAG_compile_unit DIEs.
4194         * dwarfread.c (add_partial_symbol):  Do not enter opaque aggregate
4195         definitions into the psymtab.
4196
4197 Thu Feb  3 12:38:58 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4198
4199         * m68k-stub.c: Treat mc68332 like mc68020 most places.  Provide
4200         a special exceptionSize for the 68332.
4201
4202         * remote-udi.c (udi_attach): If no arguments, print error.
4203
4204 Thu Feb  3 17:34:05 1994  Fred Fish  (fnf@cygnus.com)
4205
4206         * Makefile.in (VERSION):  Bump to 4.12.1
4207         * NEWS, README:  Update to match 4.12 release.
4208
4209 Thu Feb  3 12:38:58 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4210
4211         * command.c (empty_sfunc): New function.
4212         (add_set_cmd): Use it instead of not_just_help_class_command.
4213         (not_just_help_class_command): Change calling convention back to
4214         what it was before yesterday's change.
4215
4216         * stabsread.c (read_sun_builtin_type): Skip the semicolon at the end
4217         of the type if present.
4218
4219 Wed Feb  2 11:16:45 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4220
4221         * printcmd.c (decode_format): Don't blithely set the size for
4222         an address to 'w'.  Make it 'g' or 'h', depending on TARGET_PTR_BIT.
4223
4224         * defs.h: Just typedef CORE_ADDR to bfd_vma.  Include bfd.h.
4225         If BFD64, make a LONGEST a BFD_HOST_64_BIT.
4226         * defs.h (longest_to_int): Don't depend on CC_HAS_LONG_LONG; instead
4227         always just check against INT_MIN and INT_MAX (this also fixes things
4228         if sizeof (long) > sizeof (int), e.g. Alpha).
4229         * config/pa/tm-hppa.h, config/i386/sun386.h, config/rs6000/tm-rs6000.h:
4230         Don't define LONGEST or BUILTIN_TYPE_LONGEST.
4231         * gdbtypes.h: Remove BUILTIN_TYPE_LONGEST and
4232         BUILTIN_TYPE_UNSIGNED_LONGEST.
4233         * language.h, c-lang.c, ch-lang.c, m2-lang.c, language.c: Remove
4234         longest_int and longest_unsigned_int.
4235         * value.h (struct value): Just align to LONGEST, rather than worrying
4236         about CC_HAS_LONG_LONG.
4237         * valarith.c (value_binop): Figure out type ourself based on
4238         sizeof (LONGEST) rather than relying on BUILTIN_TYPE_LONGEST.  The
4239         point is that we don't depend on CC_HAS_LONG_LONG anymore.
4240         * valprint.c (val_print_type_code_int): Just call
4241         extract_unsigned_integer directly, rather than going through
4242         unpack_long.
4243         * printcmd.c (decode_format): Remove code which would sometimes
4244         change 'g' size to 'w' for integers.  print_scalar_formatted handles
4245         printing huge integers well enough, thank you.
4246
4247         * command.c (add_set_cmd, not_just_help_class_command): Change
4248         to make this the sfunc, not cfunc, since that is how we call it.
4249         * command.h: Comment difference between sfunc and cfunc.
4250         * demangle.c (set_demangling_command): Add third arg since that
4251         is how it is called.
4252         (_initialize_demangler): Use sfunc, not cfunc, for
4253         set_demangling_command, since that is how it is called.
4254         Remove show_demangling_command; it has no effect.
4255
4256         * command.c (shell_escape): Report errors correctly (with error
4257         message from strerror).
4258
4259 Wed Feb  2 14:35:41 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4260
4261         * xcoffread.c (read_xcoff_symtab): Change CSECT_LEN to use
4262         x_scnlen.l rather than x_scnlen to match corresponding change in
4263         coff/internal.h.
4264
4265 Wed Feb  2 11:16:45 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4266
4267         * gdbtypes.h, ch-typeprint.c, ch-valprint.c:
4268         Change comments regarding TYPE_CODE_BOOL.
4269         * language.c (boolean_type): Always return 1 for TYPE_CODE_BOOL,
4270         regardless of the language.
4271         (value_true): Just call value_logical_not regardless of language.
4272         * coffread.c (coff_read_enum_type), stabsread.c (read_enum_type):
4273         Remove #if 0'd code which makes some enums TYPE_CODE_BOOL.
4274         * language.h: Improve comment for la_builtin_type_vector.
4275         * m2-lang.c (_initialize_m2_language): Don't add any fields to
4276         builtin_type_m2_bool.
4277
4278 Tue Feb  1 17:13:32 1994  Kevin Buettner (kev@cujo.geg.mot.com)
4279
4280         * config/m88k/{tm-delta88.h,tm-delta88v4.h}, m88k-tdep.c:
4281         Define IN_SIGTRAMP and backtrace correctly through signal handlers.
4282
4283 Tue Feb  1 22:13:25 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4284
4285         * procfs.c (wait_fd):  Handle EINTR error return from PIOCWSTOP ioctl
4286         by restarting the ioctl.
4287
4288 Tue Feb  1 16:16:25 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4289
4290         * target.h (target_wait): Add comment about calling
4291         return_to_top_level.
4292
4293 Tue Feb  1 12:21:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4294
4295         * coffread.c (read_one_sym): bfd_coff_swap_aux_in now takes
4296         additional arguments.
4297         * xcoffread.c (read_xcoff_symtab, read_symbol_lineno): Likewise.
4298
4299 Mon Jan 31 16:10:41 1994  Stu Grossman  (grossman at cygnus.com)
4300
4301         * sparc-stub.c:  Remove unnecessary #include of memory.h.
4302
4303 Mon Jan 31 12:12:34 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4304
4305         * mips-tdep.c: Remove code which sets saved_regs from
4306         init_extra_frame_info and put it in new function mips_find_saved_regs.
4307         (READ_FRAME_REG): Remove macro and replace uses with the expansion.
4308         * mips-tdep.c, config/mips/tm-mips.h: When examining ->saved_regs,
4309         check if it is NULL and call mips_find_saved_regs if so.
4310
4311         * remote-mips.c: Use unfiltered, not filtered, output most places.
4312
4313         * blockframe.c (get_prev_frame_info): Detect and stop an infinite
4314         backtrace.  Revise comments.
4315
4316 Mon Jan 31 09:40:33 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4317
4318         * mdebugread.c (parse_procedure):  Remove _sigtramp kludges for
4319         alpha and irix. The _sigtramp case has to be handled properly
4320         in the tdep files if we have no ecoff debugging info.
4321         * alpha-tdep.c (alpha_frame_saved_pc, alpha_frame_chain),
4322         mips-tdep.c (mips_frame_saved_pc):  Handle signal handler frames
4323         without PC_REGNUM kludge.
4324         * mdebugread.c (fixup_sigtramp), mips-tdep.c (read_next_frame_reg):
4325         Clean up handling of mips sigtramp frames, improve comments.
4326
4327 Sat Jan 29 23:25:57 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
4328
4329         * paread.c (read_unwind_info): Fix typo.
4330
4331         * paread.c (pa_symtab_read): Update the "check_strange_names"
4332         filter to match GCC's current output.  Filter out section symbols
4333         (which the HP linker sometimes puts in the wrong place).
4334
4335 Sat Jan 29 07:44:59 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
4336
4337         * serial.h (SERIAL_SET_TTY_STATE): Comment return value.
4338
4339         * Makefile.in (TAGS): Just echo one line, rather than the whole thing.
4340
4341         * Makefile.in: Remove all references to sparcly-nat.c.
4342
4343         * Makefile.in (HFILES_NO_SRCDIR): Include dcache.h remote-utils.h
4344         remote-sim.h directly, rather than via $(remote_utils_h).  This avoids
4345         duplicating serial.h and target.h.
4346
4347         * Makefile.in: Don't set M_INSTALL and M_UNINSTALL.  These variables
4348         are not used anywhere (a 5 Oct 1993 change removed the uses).
4349
4350         * config/m68k/monitor.mt (TDEPFILE): Add remote-es.o.
4351         * config/m68k/es1800.mt: Add comment.
4352         * remote-es.c: Extensive changes to update to current conventions.
4353
4354         * ser-unix.c (wait_for, hardwire_readchar) [HAVE_TERMIO, HAVE_TERMIOS]:
4355         If the timeout is too big to fit in c_cc[VTIME], then do multiple reads
4356         to achieve the desired timeout.
4357         * serial.h (serial_t): Add field timeout_remaining.
4358
4359 Fri Jan 28 08:45:02 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
4360
4361         * c-exp.y (yylex): Reenable nested type code.
4362
4363 Fri Jan 28 15:40:33 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4364
4365         * a29k-tdep.c (examine_tag): Add comment regarding argcount.
4366
4367         * remote-mips.c (mips_ops): Fix docstring.
4368
4369         * remote-bug.c (bug_ops): Remove spurious newline from docstring.
4370
4371         * config/m68k/tm-monitor.h: Changes to bring this into accordance
4372         with the old tm-m68k-em.h:
4373         (GDBINIT_FILENAME, DEFAULT_PROMPT): Remove.
4374         (HAVE_68881): Don't undefine; HAVE_68881 is obsolete.
4375         (REGISTER_NAMES): Don't muck with it; what tm-m68k.h has is fine.
4376         Add FIXME regarding GET_LONGJMP_TARGET.
4377
4378         * remote-udi.c (udi_close, udi_detach, udi_kill): Add comments.
4379         * infptrace.c (kill_inferior): Add comments.
4380         * main.c (quit_command): Call target_close after we kill or
4381         detach.
4382         * remote-udi.c (udi_close): Don't error() if QUITTING.
4383
4384 Fri Jan 28 11:55:52 1994  Rob Savoye  (rob@darkstar.cygnus.com)
4385
4386         * configure.in: Make m68k-coff and aout add monitor support in
4387         addition to the standard serial support.
4388
4389 Fri Jan 28 08:45:02 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
4390
4391         * mdebugread.c (psymtab_to_symtab_1): Don't complain on stLabel with
4392         index indexNil.
4393
4394 Fri Jan 28 10:40:34 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4395
4396         * config/pa/tm-hppa.h: Define macro SMASH_TEXT_ADDRESS.
4397         * elfread.c (record_minimal_symbol_and_info),
4398         dwarfread.c (process_dies), paread.c (pa_symtab_read): Use it.
4399
4400 Thu Jan 27 15:12:23 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4401
4402         * i386-stub.c: Add ".text" right before "mem_fault:".
4403
4404         * main.c (baud_rate): Add FIXME comment about printing -1 value.
4405
4406         * remote-utils.c (usage): Fix message to be accurate and conform
4407         more closely to normal conventions.
4408
4409         * remote-utils.c (gr_files_info): Have the exec_bfd test control
4410         whether to show information about exec_bfd, and not control whether
4411         to show information about device and speed.
4412
4413         * remote-utils.c (gr_open): If sr_get_device returns NULL, give
4414         usage message, don't dump core.
4415
4416         * remote-bug.c (bug_write_memory): Use alloca, not GCC extension
4417         for variable size array.
4418         (bug_fetch_register, bug_store_register): Rename "value" to
4419         "fpreg_buf" because some compilers don't like variables whose
4420         names are the same as types.
4421         (bug_store_register): Use a cast when converting char * to
4422         unsigned char *.
4423
4424         * symmisc.c (maintenance_print_symbols): Don't refer to the name
4425         of the command in error message (the text was referring to the old
4426         name of the command).
4427
4428         * symmisc.c (dump_symtab): Fix args to fprintf_filtered.
4429
4430         * c-typeprint.c (c_type_print_base): Have SHOW == 0 mean to print
4431         full details on structure elements without names.  This partially
4432         reverts the changes of 1 Jul 1993 and 31 Aug 1993; I think this aspect
4433         of those changes was accidental.
4434
4435         * stack.c (parse_frame_specification): If SETUP_ARBITRARY_FRAME is
4436         defined, make it an error to specify a single argument which is not
4437         a frame number.
4438
4439         * Makefile.in (version.c), main.c (print_gdb_version): Use
4440         host_alias and target_alias, not host_canonical and
4441         target_canonical, to print configuration.
4442
4443 Wed Jan 26 10:57:21 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4444
4445         * parse.c (write_exp_msymbol): Use new type msymbol_addr_type instead
4446         of builtin_type_long.  It is necessary to get a type which is
4447         TARGET_PTR_BIT bits in size; builtin_type_long might not be big enough.
4448
4449         Fix many sins which will come up in 32 bit x 64 bit GDB, and
4450         various miscellaneous things discovered in the process:
4451         * printcmd.c, defs.h (print_address_numeric): New function.
4452         * c-valprint.c (c_val_print), ch-valprint.c (chill_val_print)
4453         breakpoint.c (describe_other_breakpoints, breakpoint_1, mention),
4454         cp-valprint.c (cplus_print_value), infcmd.c (jump_command),
4455         printcmd.c, stack.c, symfile.c, symmisc.c, valprint.c:
4456         Use it.
4457         * utils.c, defs.h (gdb_print_address): New function.
4458         * expprint (dump_expression), gdbtypes.h: Use it.
4459         * breakpoint.c (describe_other_breakpoints),
4460         symmisc.c (dump_symtab, print_symbol):
4461         Use filtered not unfiltered I/O.
4462         (remove_breakpoints): Remove BREAKPOINT_DEBUG code.  Might as well
4463         just run gdb under a debugger for this (and it had problems with
4464         printing addresses, how to print b->shadow, etc.).
4465         * buildsym.c (make_blockvector), core.c (memory_error),
4466         exec.c (print_section_info), maint.c (print_section_table),
4467         mdebugread.c (parse_procedure), solib.c, source.c, symfile.c,
4468         symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
4469         Add comments saying code is broken.  Marked with "FIXME-32x64".
4470         * dbxread.c (process_one_symbol), partial-stab.h (default),
4471         remote-vx.c (vx_run_files_info):
4472         Don't cast int being passed to local_hex_string.
4473         * symmisc.c (print_symbol): Don't cast long being passed to %lx.
4474         * symtab.h (general_symbol_info): Add comment about SYMBOL_VALUE
4475         only being a long.
4476         * symmisc.c (print_symbol): Print "offset" in message for LOC_ARG
4477         and LOC_LOCAL.
4478         * printcmd.c (print_address): Remove #if 0 code with ADDR_BITS_REMOVE.
4479         * source.c: Include <sys/types.h> regardless of USG.
4480
4481 Tue Jan 25 12:58:26 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4482
4483         * valops.c (value_assign):  Set `type' after coercing toval.
4484         * c-valprint.c (c_val_print), ch-valprint.c (chill_val_print):
4485         Use extract_unsigned_integer to get the address of a reference.
4486
4487 Tue Jan 25 11:31:53 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4488
4489         * stabsread.c (STABS_CONTINUE, error_type), partial-stab.h:
4490         AIX can use ? instead of \ for continuation.  Deal with it.
4491
4492         * paread.c (read_unwind_info): Just assign to objfile->obj_private,
4493         not OBJ_UNWIND_INFO.  Assigning to a cast is a GCC-ism which
4494         the HP compiler in ANSI mode doesn't like.
4495
4496         * main.c: When defaulting HAVE_SIGSETMASK based on USG, just do it
4497         based on USG, rather than defining HAVE_SIGSETMASK to an
4498         expression containing defined.  Having a macro used in #if expand
4499         to an expression containing "defined" is undefined according to
4500         ANSI, and the HP compiler in ANSI mode doesn't do what we wanted
4501         it to.
4502
4503 Mon Jan 24 20:51:29 1994  John Gilmore  (gnu@cygnus.com)
4504
4505         * sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
4506         Clean up the changes of 11 Jan, as recommended by Peter Schauer.
4507
4508 Fri Jan 21 19:10:44 1994  Per Bothner  (bothner@kalessin.cygnus.com)
4509
4510         * ch-exp.y (match_string_literal):  Allow a zero-length string.
4511         * ch-lang.c (chill_printstr):  Don't print zero-length string funny.
4512
4513 Sat Jan 22 17:08:48 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4514
4515         * i386aix-nat.c (i386_float_info): Reverse order of registers before
4516         passing them to print_387_status.
4517         (print_387_status): Don't subtract top from 7 before using it.
4518         * i387-tdep.c: Remove comment about AIX wanting "top" subtracted
4519         from 7; the above explains it.
4520
4521 Sat Jan 22 20:25:11 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4522
4523         * mips-tdep.c (init_extra_frame_info):  Use frame relative stack
4524         pointer value when fixing up the frame at the start of a function.
4525
4526 Sat Jan 22 12:29:13 1994  Stu Grossman  (grossman at cygnus.com)
4527
4528         * lynx-nat.c (fetch_core_registers):  Load the I & L regs for the
4529         Sparc from the stack.
4530
4531 Sat Jan 22 08:30:42 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
4532
4533         * remote-mips.c (mips_initialize): Clear mips_initializing via
4534         cleanup chain, not directly.
4535
4536         * ser-unix.c (wait_for) [HAVE_TERMIO, HAVE_TERMIOS]: Make a timeout
4537         of -1 mean forever, like in the HAVE_SGTTY case.  Warn if we are
4538         munging the timeout due to the limited range of c_cc[VTIME].
4539
4540         * fork-child.c, inferior.h (fork_inferior): New argument shell_file.
4541         * procfs.c (procfs_create_inferior), inftarg.c (child_create_inferior),
4542         m3-nat.c (m3_create_inferior): Pass it.
4543         * procfs.c: Remove ptrace function.  It was declared in a way which
4544         conflicted with the prototype in unistd.h on Solaris.
4545
4546 Sat Jan 22 01:37:40 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4547
4548         * sparc-tdep.c (frame_saved_pc):  Get the pc from the saved pc
4549         in the sigcontext if it is a signal trampoline frame.
4550         * config/sparc/tm-sun4sol2.h (IN_SIGTRAMP, SIGCONTEXT_PC_OFFSET):
4551         Define for Solaris2.
4552
4553 Sat Jan 22 00:34:47 1994  Stu Grossman  (grossman at cygnus.com)
4554
4555         * sparc-tdep.c, lynx-nat.c, config/sparc/tm-sparc.h,
4556         config/sparc/tm-sparclynx.h:  Move defs of FRAME_SAVED_I0/L0 to
4557         tm-sparc.h so they can be overridden if necessary.
4558
4559 Fri Jan 21 17:49:28 1994  Stu Grossman  (grossman at cygnus.com)
4560
4561         * lynx-nat.c:  Add Sparc support.
4562         * sparcly-nat.c:  Remove.  It's useless.
4563         * config/sparc/nm-sparclynx.h:  Rewrite.
4564         * config/sparc/sparclynx.mh (NATDEPFILES):  Replace sparcly-nat.o
4565         with lynx-nat.o
4566         * config/sparc/tm-sparclynx.h:  Rewrite.
4567
4568 Fri Jan 21 19:08:48 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4569
4570         * rs6000-pinsn.c: Use the new disassembler in the opcodes
4571         directory.  Old code was discarded, since the new opcode table has
4572         a different format.
4573
4574 Fri Jan 21 14:28:30 1994  Fred Fish  (fnf@cygnus.com)
4575
4576         * Makefile.in (realclean):  Remove info files per make-stds.texi.
4577
4578 Fri Jan 21 12:47:53 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4579
4580         * dbxread.c (end_psymtab): Only patch psymtab textlow and texthigh
4581         if N_SO_ADDRESS_MAYBE_MISSING is defined.
4582         * config/sparc/tm-sun4sol2.h: Define it.
4583
4584 Thu Jan 20 15:04:24 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4585
4586         * printcmd.c (print_address_symbolic):  Unconditionally use msymbol
4587         if we did not find a symbol.
4588
4589 Fri Jan 21 08:20:18 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
4590
4591         * infptrace.c (child_xfer_memory): Only use if CHILD_XFER_MEMORY
4592         is not defined.
4593
4594         * hppab-nat.c (call_ptrace): Delete redundant function.
4595         (kill_inferior, attach, detach, child_resume): Likewise.
4596         (child_xfer_memory): Likewise.
4597
4598         * hppah-nat.c (call_ptrace): Delete redundant function.
4599         (kill_inferior, attach, detach, child_resume): Likewise.
4600
4601         * config/pa/hppabsd.mh (NATDEPFILES): Add infptrace.o.
4602
4603         * config/pa/hppahpux.mh (NATDEPFILES): Add infptrace.o.
4604
4605         * config/pa/nm-hppab.h (FETCH_INFERIOR_REGISTERS): Define.
4606
4607         * config/pa/nm-hppah.h (FETCH_INFERIOR_REGISTERS): define.
4608         (CHILD_XFER_MEMORY): Define.
4609         (PT_*): Define so that generic infptrace.c code can be used.
4610
4611 Fri Jan 21 09:23:33 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4612
4613         * xcoffread.c (xcoff_symfile_read): Make second parameter a
4614         struct section_offsets *, not a (nonexistent) struct section_offset *.
4615
4616         * xcoffread.c (read_xcoff_symtab): Make main_aux just a union
4617         internal_xcoff_symtab, not an array of one of them.  Change lots of
4618         "main_aux" to "&main_aux" and so on.
4619
4620         * coffread.c, xcoffread.c: Include <coff/internal.h>
4621         before "symfile.h".
4622
4623 Thu Jan 20 17:30:55 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4624
4625         * coffread.c (coff_getfilename): Make it not static.
4626
4627         * xcoffread.c (read_xcoff_symtab): complain() not abort().
4628
4629         * xcoffread.c (struct coff_symbol): Rename c_nsyms to c_naux (removes
4630         a completely gratuitous difference between xcoffread.c and coffread.c).
4631
4632 Wed Jan 19 15:09:44 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4633
4634         * infrun.c (wait_for_inferior): Don't set frame for
4635         step_resume_breakpoint for IN_SIGTRAMP cases.
4636
4637         * infrun.c (wait_for_inferior), breakpoint.h (struct bpstat_what),
4638         breakpoint.c (bpstat_what): Move step_resume from its own field of
4639         the struct bpstat_what into the main_action.  Make it override
4640         other breakpoints.  This is a conservative change in the sense
4641         that before the step resume breakpoint was a breakpoint.c
4642         breakpoint, hitting the step resume breakpoint overrode even
4643         calling bpstat_stop_status.
4644
4645 Wed Jan 19 12:40:25 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4646
4647         * infrun.c (normal_stop):  Set stop_pc after popping the dummy frame
4648         in case execution was stopped in the called function.
4649         * stack.c (print_frame_info, frame_info):  If backtracing through
4650         a call dummy, handle the starting source line number on a line
4651         boundary like backtracing through sigtramp.
4652         * sparc-tdep.c (sparc_frame_find_saved_regs):  Get frame address
4653         for call dummy frame right.  Remove old test for dummy frame,
4654         it has been unused at least since gdb-3.5.
4655         * sparc-tdep.c (sparc_push_dummy_frame):  Set return address register
4656         of the dummy frame.
4657
4658 Tue Jan 18 16:16:35 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4659
4660         * infcmd.c (signal_command): Accept 0 as legitimate signal number.
4661
4662 Tue Jan 18 14:09:25 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4663
4664         * infrun.c (signals_info), target.c (target_signal_from_name):
4665         Use ugly casts to avoid enumvar < enumvar or enumvar++.
4666
4667 Mon Jan 17 22:00:15 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4668
4669         * ser-unix.c (hardwire_noflush_set_tty_state): Don't muck with ICANON.
4670         * inflow.c (terminal_ours_1): When discussing how to deal with the
4671         tty state, make note of query() as well as readline.
4672
4673         * infrun.c (_initialize_infrun): Add TARGET_SIGNAL_POLL to list of
4674         signals for which stop and print are cleared by default.
4675
4676 Mon Jan 17 20:00:51 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
4677
4678         * config/pa/tm-hppa.h (unwind_table_entry): Use one of the
4679         reserved fields to hold a stub unwind entry type.  Fix typo.
4680         (stub_unwind_entry): New structure for raw stub unwind entries.
4681         (stub_unwind_types): The types of stubs we may encounter.
4682         (UNWIND_ENTRY_SIZE, STUB_UNWIND_ENTRY_SIZE): New defines.
4683         * hppa-tdep.c (rp_saved): Use additional information provided
4684         by linker stub unwind descriptors.
4685         (frameless_function_invocation): Likewise.
4686         (frame_chain_valid): Likewise.
4687         * paread.c (compare_unwind_entries): New function for sorting
4688         unwind table entries.
4689         (read_unwind_info): Rewrite to remove dependency on host endianness.
4690         Read in data from the $UNWIND_END$ subspace which contains linker
4691         stub unwind descriptors.  Merge that data into the basic unwind
4692         table.
4693
4694         * hppab-nat.c (_initialize_kernel_u_addr): Delete unwanted functions.
4695
4696 Mon Jan 17 22:00:15 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4697
4698         * xcoffread.c (read_xcoff_symtab, case C_FILE): Accept the name
4699         from either the symbol name or the auxent.
4700         * coffread.c, symfile.h (coff_getfilename): Renamed from getfilename,
4701         no longer static.
4702
4703 Mon Jan 17 13:35:01 1994  Fred Fish  (fnf@cygnus.com)
4704
4705         * Makefile.in (ALLPARAM):  Change irix5.h to nm-irix5.h.
4706
4707 Mon Jan 17 12:35:42 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4708
4709         * README:  Update notes for alpha port.
4710
4711 Mon Jan 17 11:15:57 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4712
4713         * i960-tdep.c (i960_fault_to_signal): Return TARGET_SIGNAL_ILL
4714         for operation fault, constraint fault, and type fault.
4715
4716 Sun Jan 16 12:46:01 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4717
4718         * Makefile.in (init.c): Add comment explaining formatting conventions.
4719
4720         * c-exp.y (parse_number): Assign to temporary between the right
4721         shifts, to work around a bug in the SCO compiler.
4722
4723         * Makefile.in (ALLCONFIG, ALLPARAM, ALLDEPFILES, HFILES_NO_SRCDIR):
4724         Add various files which were added to GDB recently.
4725
4726         * xcoffread.c (process_xcoff_symbol): Only change 'V' to 'S' if not
4727         within_function.
4728
4729         * Makefile.in: Add mostlyclean target.
4730
4731 Sat Jan 15 10:20:13 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4732
4733         * Version 4.11.4.
4734
4735 Sat Jan 15 18:27:34 1994  Per Bothner  (bothner@kalessin.cygnus.com)
4736
4737         * main.c (show_commands):  Make return type of extern
4738         history_get be HIST_ENTRY, rather than struct _hist_entry.
4739         (The latter loses with the upcoming merged readline.)
4740
4741 Sat Jan 15 10:20:13 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4742
4743         * minsyms.c (prim_record_minimal_symbol_and_info): Make tempstring
4744         const char *, not char *.
4745
4746         * symtab.h (struct symbol): Make section short, not unsigned short.
4747
4748         * symtab.c (lookup_symbol): Add comment about QUIT here.
4749
4750         * utils.c (fputs_unfiltered): Call fputs, not fputs_maybe_filtered.
4751
4752         * c-exp.y (parse_number): Check for overflow regardless of range
4753         checking.  Fix overflow check to use unsigned LONGEST, not
4754         unsigned int.
4755
4756         * c-exp.y (parse_number): Make it so that integer constants are
4757         builtin_type_long_long if builtin_type_long isn't big enough or if
4758         an "LL" suffix is used.  Properly handle "UL" or "LU" suffixes.
4759
4760         * c-typeprint.c (c_type_print_varspec_suffix, case TYPE_CODE_FUNC):
4761         Print our "()" first, then recurse for the target type.
4762
4763 Fri Jan 14 21:55:39 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4764
4765         * remote-udi.c (udi_create_inferior): Quote empty execfile argument.
4766
4767         * gdbserver/low-lynx.c: Include <sys/wait.h> not "/usr/include/wait.h".
4768
4769 Fri Jan 14 14:17:06 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4770
4771         * utils.c (request_quit): Re-establish signal handler regardless
4772         of USG.
4773
4774         * config/mips/xm-irix4.h: Define HAVE_TERMIOS.
4775
4776 Fri Jan 14 21:55:39 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4777
4778         * i960-tdep.c: Include target.h.
4779
4780 Fri Jan 14 17:12:28 1994  Stan Shebs  (shebs@andros.cygnus.com)
4781
4782         * lynx-nat.c (sys/wait.h): Don't use absolute pathname.
4783
4784 Fri Jan 14 11:06:10 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
4785
4786         * lynx-nat.c (child_wait): Fix thinkos in struct target_waitstatus
4787         changes (status -> ourstatus; declare status, etc.).
4788         * config/nm-lynx.h: Fix child_wait prototype and include target.h.
4789
4790 Fri Jan 14 14:17:06 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4791
4792         * Makefile.in (ALLPARAM): Add config/nm-lynx.h.
4793
4794 Fri Jan 14 11:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4795
4796         * remote-mips.c (mips_request, mips_wait): Correct prototypes.
4797
4798 Fri Jan 14 11:37:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4799
4800         * config/i386/xm-linux.h: Define HAVE_TERMIOS.
4801
4802 Fri Jan 14 01:04:36 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4803
4804         * config/alpha/tm-alpha.h (CALL_DUMMY):  Improve comment.
4805
4806 Thu Jan 13 10:32:38 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4807
4808         * remote-vx.c (vx_wait): Only call i960_fault_to_signal if I80960
4809         is defined.  Otherwise just report TARGET_SIGNAL_UNKNOWN.
4810
4811         * mips-tdep.c (mips_push_arguments): Byteswap struct_addr before
4812         writing it.
4813
4814         Add search to target vector (#if 0'd until after 4.12):
4815         * target.h (to_search, target_search): Add.
4816         * gdbcore.h, core.c (generic_search): Add.
4817         * remote.c (remote_search): Add.
4818         * a29k-tdep.c (init_frame_info): Use target_search to find traceback
4819         tag.
4820
4821         * printcmd.c (print_address_symbolic): If set print fast-symbolic-addr
4822         is on, call find_pc_function rather than relying just on the minimal
4823         symbols (probably only matters for symbol readers which don't put
4824         statics in the minimal symbols, but changing this strikes me as
4825         not conservative enough).
4826         Initialize name_location in all cases.
4827         If no symbol and no msymbol, don't print anything symbolic.
4828
4829         * a29k-tdep.c (push_dummy_frame): Add comment about saving lr0.
4830
4831 Wed Jan 12 20:53:16 1994  John Gilmore  (gnu@cygnus.com)
4832
4833         * printcmd.c (print_address_symbolic):  Make it search the
4834         symtabs for variables as well as functions.  Add `set print
4835         fast-symbolic-addr' and default it to fast (the old way).
4836         Print line numbers for data items as well as functions.
4837
4838         * symtab.c (find_addr_symbol):  Return the symtab and the symbol
4839         address, if a symbol is found (take two more args pointing to
4840         where to store these results).
4841
4842         * symtab.h (find_addr_symbol):  Add prototype.
4843
4844 Wed Jan 12 19:32:11 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4845
4846         * objfiles.h: Fix comments to reflect the fact that the phrase
4847         "top of stack" always refers to where the pushing and popping takes
4848         place, regardless of whether it is at the highest or lowest address.
4849
4850 Wed Jan 12 13:23:37 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4851
4852         * mdebugread.c (parse_symbol):  Do not set TYPE_TAG_NAME for
4853         compiler generated tag names.
4854         * mdebugread.c (parse_type):  Handle cross references to qualified
4855         aggregate types.
4856         * valops.c (value_struct_elt):  Improve error message if the
4857         address of a method is requested from an object instance.
4858         * valops.c (search_struct_method):  Make name_matched non-static
4859         to get it initialized correctly.
4860         * config/i386/nm-i386sco.h (CANNOT_STORE_REGISTER):  Define to
4861         exclude segment register which are not writable on newer SCO versions.
4862
4863 Wed Jan 12 14:44:45 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4864
4865         * go32-xdep.c: Remove unused function uerror.
4866         (sigsetmask): Declare return type.  Declare argument (to match the
4867         way it is called).  Explicitly return 0.
4868
4869 Wed Jan 12 01:44:25 1994  John Gilmore  (gnu@cygnus.com)
4870
4871         * symtab.h (struct symbol, general_symbol_info, minimal_symbol,
4872         partial_symbol):  Shrink the storage sizes of symbols, by making
4873         enums into 1-byte bitfields when compiled __GNUC__, moving all the
4874         enums and small ints to the end of each struct to improve
4875         alignment, and switching the section number from int to unsigned
4876         short.
4877
4878 Wed Jan 12 00:16:26 1994  John Gilmore  (gnu@cygnus.com)
4879
4880         * symtab.c (find_addr_symbol):  New routine that will find the nearest
4881         symbol associated with an address.  It does so by exhaustive
4882         search of the symtabs, so it's slow but complete.
4883
4884 Tue Jan 11 23:57:30 1994  John Gilmore  (gnu@cygnus.com)
4885
4886         * coffread.c (read_coff_symtab):  Set PC bounds of _globals_ symtab
4887         to [0,0] rather than [0, end of first source file].  This avoids
4888         problems with other parts of GDB looking for linetables in the
4889         _globals_ symtab.  Eliminate variables num_object_files and
4890         first_object_file_end.
4891
4892 Tue Jan 11 00:53:46 1994  John Gilmore  (gnu@cygnus.com)
4893
4894         * a29k-tdep.c (init_frame_info):  Cast null arg to examine_tag.
4895         (pop_frame):  Restore PC2 and LR0 from dummy frames.
4896         (push_dummy_frame):  Save PC2 and LR0 into dummy frames.
4897         (setup_arbitrary_frame):  Handle 3 args and set up real frames.
4898         * config/a29k/tm-a29k.h (FRAME_NUM_ARGS):  Update comments.
4899         (DUMMY_FRAME_RSIZE):  Add 2 longwords for PC2 and LR0.
4900         (SETUP_ARBITRARY_FRAME):  Define.
4901
4902 Tue Jan 11 06:59:10 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
4903
4904         * infrun.c, config/mips/tm-irix5.h: Remove #if 0'd AT_FUNCTION_START.
4905
4906 Tue Jan 11 14:27:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4907
4908         * remote-udi.c (udi_resume): Correct prototype.
4909
4910 Tue Jan 11 11:10:30 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
4911
4912         * config/pa/tm-hppa.h (FRAME_FIND_SAVED_REGS): Call
4913         hppa_frame_find_saved_regs.
4914         * hppa-tdep.c (dig_fp_from_stack): Delete function.
4915         (prologue_inst_adjust_sp): New function.
4916         (is_branch, inst_saves_gr, inst_saves_fr): New functions.
4917         (skip_prologue): Completely rewrite to use unwind information.
4918         (hppa_frame_find_saved_regs): Likewise.
4919
4920 Tue Jan 11 06:59:10 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
4921
4922         * remote-mips.c (mips_wait): Use new function mips_signal_from_protocol
4923         to convert a signal number with appropriate bounds checking.
4924
4925         * remote-mips.c (mips_wait): Fix typos (0x177 -> 0177, 0x377 -> 0377).
4926
4927 Tue Jan 11 00:53:46 1994  John Gilmore  (gnu@cygnus.com)
4928
4929         * stack.c (frame_info):  If FRAME_FIND_SAVED_REGS isn't defined,
4930         print a newline to end the display anyway.
4931
4932         * sparc-tdep.c (sparc_pop_frame):  Pop the fsr and csr (float and
4933         coprocessor status regs) when popping a frame.  This fixes 
4934         float exceptions that occur after calling inferior functions.
4935
4936         * sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
4937         Read and write the fsr (float status register) to/from the child
4938         process along with the float regs.  Remove Peter Schauer's change
4939         of May 24 '93, which has higher overhead and doesn't solve the
4940         real problem (which was that FSR wasn't being set).
4941
4942 Mon Jan 10 23:16:42 1994  John Gilmore  (gnu@cygnus.com)
4943
4944         * a29k-tdep.c (examine_prologue):  Don't worry if the ASGEQ
4945         stack overflow check isn't right after the register stack
4946         adjustment instruction.  Metaware R2.3u compiler moves other
4947         things in front of it.  This fix isn't perfect but is what's
4948         running.
4949
4950 Mon Jan 10 20:08:23 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
4951
4952         * c-valprint.c (c_val_print): Treat TYPE_CODE_RANGE like TYPE_CODE_INT.
4953
4954         * config/alpha/alpha-netware.mt: Rename to alpha-nw.mt for 14
4955         character filenames.
4956         * configure.in: Change accordingly.
4957
4958 Mon Jan 10 15:48:36 1994  Tom Lord  (lord@rtl.cygnus.com)
4959
4960         * m68k-stub.c, sparc-stub.c: removed spurious introduction of 
4961         _filtered io routines from these two files.
4962
4963 Fri Jan  7 12:42:45 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4964
4965         * config/i386/tm-i386v.h, config/m68k/tm-m68k.h, config/mips/tm-mips.h,
4966         config/vax/tm-vax.h (CALL_DUMMY_BREAKPOINT_OFFSET):  Define.
4967         * mdebugread.c (parse_symbol):  Handle enum sh.type produced by
4968         DEC c89. 
4969         * mdebugread.c (add_line):  Handle zero linenos produced by DEC c89.
4970
4971 Fri Jan  7 12:55:25 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4972
4973         * utils.c (print_sys_errmsg): Call gdb_flush (gdb_stdout) before
4974         printing to gdb_stderr.
4975
4976         * remote-udi.c (udi_kill): Don't close the connection, just set
4977         inferior_pid to zero.
4978         (udi_mourn): Call remove_breakpoints.
4979
4980         * remote-udi.c: Remove obsolete need_artificial_traps comment.
4981
4982         * i386b-nat.c (sregmap): If sEAX, etc., not defined, use tEAX, etc.
4983
4984 Thu Jan  6 07:17:53 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
4985
4986         * symtab.c (lookup_symbol): Don't try adding .c to the name.
4987
4988         * remote-bug.c: At the start of each section, reset srec_frame
4989         back to 160.
4990
4991         * target.h: Add TARGET_WAITKIND_LOADED and TARGET_WAITKIND_SPURIOUS.
4992         * target.c (store_waitstatus): Add CHILD_SPECIAL_WAITSTATUS hook.
4993         * infrun.c (wait_for_inferior): Replace SIGTRAP_STOP_AFTER_LOAD with
4994         code which looks for those two waitkinds.  Use switch statement.
4995         * config/rs6000/tm-rs6000.h: Replace SIGTRAP_STOP_AFTER_LOAD with
4996         CHILD_SPECIAL_WAITSTATUS.
4997
4998         * procfs.c (procfs_wait): Fix argument name to match 4 Jan changes.
4999         * Move target_signal_from_host, target_signal_to_host, and
5000         store_waitstatus from inftarg.c to target.c.  procfs needs them.
5001         * target.c: Include "wait.h" and <signal.h>.
5002         * target.h, infrun.c (proceed), proceed callers: Pass new code
5003         TARGET_SIGNAL_DEFAULT instead of -1.  This avoids problems with
5004         enums being treated as unsigned and is cleaner.
5005         * infrun.c (signals_info): Don't print TARGET_SIGNAL_DEFAULT or
5006         TARGET_SIGNAL_0.
5007         * infcmd.c (signal_command), infrun.c (signals_info):
5008         Don't allow user to specify numeric equivalent of
5009         TARGET_SIGNAL_DEFAULT.
5010
5011 Tue Jan  4 15:34:36 1994  Stu Grossman  (grossman@cygnus.com)
5012
5013         * config/alpha/alpha-netware.mt:  New target support for Alpha
5014         running Netware.
5015         * configure.in:  Add alpha-*-netware* target.
5016
5017 Tue Jan  4 14:51:35 1994  Stan Shebs  (shebs@andros.cygnus.com)
5018
5019         * remote-mips.c (mips_wait): Fix ref to TARGET_WAITKIND_STOPPED.
5020
5021 Tue Jan  4 09:47:14 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
5022
5023         * target.h: Add enum target_waitkind, enum target_signal, and
5024         struct target_waitstatus.  Change status argument to target_wait to
5025         be struct target_waitstatus * instead of int *.
5026         * target.h, infrun.c, all targets: Change type of signal arguments
5027         to resume(), proceed(), and target_resume() from int to enum
5028         target_signal.
5029         * All targets (*_wait, *_resume): Change accordingly.
5030         * infcmd.c (program_info, signal_command), throughout infrun.c, 
5031         * fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff.
5032         * convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex
5033         signal code stuff right with the new signals would be non-trivial).
5034         * inferior.h (stop_signal): Make it enum target_signal not int.
5035         * target.c, target.h (target_signal_to_string, target_signal_to_name,
5036         target_signal_from_name): New functions.
5037         * inftarg.c, target.h (target_signal_to_host, target_signal_from_host,
5038         store_waitstatus): New functions.
5039         * procfs.c (procfs_notice_signals): Use them.
5040         * i960-tdep.c (i960_fault_to_signal): New function, to replace
5041         print_fault.
5042         * config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.
5043
5044         * objfiles.c (build_objfile_section_table): Don't abort() if
5045         objfile->sections is already set.
5046
5047         * objfiles.c (add_to_objfile_sections): Check SEC_ALLOC not SEC_LOAD
5048         to match recent change to exec.c.
5049
5050         * Version 4.11.3.
5051
5052         * main.c (print_gdb_version): Change year to 1994.
5053
5054         * ChangeLog, ChangeLog-93: Split ChangeLog at 1994.
5055         * Makefile.in (NONSRC): Add ChangeLog-93.
5056
5057 Mon Jan  3 11:57:29 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
5058
5059         * stabsread.c (read_type): Allow defining several type numbers
5060         at once (e.g. "(1,2)=(3,4)="...).
5061
5062         * stabsread.c (read_enum_type): Use TARGET_INT_BIT not sizeof (int).
5063
5064         * breakpoint.c (frame_in_dummy): Check PC as well as frame.
5065
5066 Mon Jan  3 02:47:03 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5067
5068         * mdebugread.c (psymtab_to_symtab_1):  Only pass N_STAB symbols
5069         to process_one_symbol.
5070         * symtab.c (find_pc_psymbol):  Search global_psymbols as well to
5071         avoid caching a bad endaddr in find_pc_partial_function.
5072
5073 Sun Jan  2 21:41:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
5074
5075         * config/m68k/tm-sun3.h: Don't define BELIEVE_PCC_PROMOTION.
5076
5077 Sat Jan  1 04:35:23 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5078
5079         * infrun.c (wait_for_inferior):  Do not step or step resume past
5080         the end of a one-line function we just stepped into.
5081
5082 For older changes see ChangeLog-93
5083 \f
5084 Local Variables:
5085 mode: indented-text
5086 left-margin: 8
5087 fill-column: 74
5088 version-control: never
5089 End: