1 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
3 ARI fix: "xasprintf" rule.
4 * printcmd.c (sym_info): Replace xasprintf by xstrprintf.
6 2009-03-25 Pedro Alves <pedro@codesourcery.com>
8 * remote.c (remote_start_remote): In non-stop mode, call
9 init_wait_for_inferior before adding threads and inferiors.
11 2009-03-25 Joel Brobecker <brobecker@adacore.com>
13 * breakpoint.c (breakpoint_thread_match): Split a large condition
14 into several smaller conditions. No behavior change.
16 2009-03-25 Pedro Alves <pedro@codesourcery.com>
18 * infrun.c (infrun_thread_thread_exit): New.
19 (_initialize_infrun): Attach it to the thread_exit observer.
20 * thread.c (delete_thread_1): Always call the observer, passing it
22 * mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
23 SILENT, return immediately.
25 2009-03-25 Pedro Alves <pedro@codesourcery.com>
27 * infrun.c (normal_stop): Use has_stack_frames instead of
29 * mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
30 when there is no thread selected.
31 (mi_cmd_execute): Don't special case commands that can run without
32 a valid selected thread.
33 * top.c (execute_command): Don't special case commands that can
34 run without a valid selected thread. Use has_stack_frames.
35 * infcmd.c (ensure_valid_thread): New.
36 (continue_1, step_1, jump_command, signal_command): Use it.
37 (detach_command): Error out if there's no selected thread/inferior.
38 * thread.c (print_thread_info): Allow having no thread selected.
39 (switch_to_thread): Don't read the PC if there is no current thread.
40 (do_restore_current_thread_cleanup): Don't record the current
41 frame if there is no current thread.
42 (make_cleanup_restore_current_thread): Don't read frame info if
43 there is no selected thread.
44 (_initialize_thread): Don't mark commands as
45 "no_selected_thread_ok".
46 * frame.c (get_current_frame): Error out if there is no valid
48 (has_stack_frames): Return false if there is no valid
50 * cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
51 "no_selected_thread_ok".
52 * cli/cli-decode.c (set_cmd_no_selected_thread_ok)
53 (get_cmd_no_selected_thread_ok): Delete.
54 * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
55 (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
57 * stack.c (get_selected_block): Use has_stack_frames.
59 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
61 Fix size of FPSCR in Power 7 processors.
62 * ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
63 (PPC_FEATURE_HAS_DFP): New #define.
64 (ppc_linux_read_description): Check for DFP feature instead of
65 ISA 2.05 to decide on size of the FPSCR.
67 2009-03-25 Kevin Buettner <kevinb@redhat.com>
69 * mn10300-tdep.c (trad-frame.h): Don't include.
70 (prologue-value.h): Include.
71 (mn10300_frame_unwind_cache, set_reg_offsets): Delete.
72 (struct mn10300_prologue): Define.
73 (push_reg, translate_rreg, check_for_saved): New functions.
74 (mn10300_analyze_prologue): Rewrite, using prologue-value
75 machinery. Handle more instructions than before. Permit
76 instructions to occur in any order.
77 (mn10300_skip_prologue): Find the extents of the function
78 in question; mn10300_analyze_prologue no longer does this.
79 (mn10300_analyze_frame_prologue): New function.
80 (mn10300_frame_base): New function.
81 (mn10300_frame_this_id): Rewrite, no longer using trad-frame
83 (mn10300_frame_prev_register): Likewise.
84 (mn10300_frame_base_address, mn10300_frame_base struct): Delete.
85 (mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
87 (mn10300_frame_unwind_init): Don't call frame_base_set_default().
89 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
91 Fix completer problem for filename completion on the first try.
93 * gdb/completer.h (gdb_completion_word_break_characters): New function.
94 * gdb/completer.c: Include gdb_assert.h.
95 (complete_line_internal_reason): New enum.
96 (complete_line_internal): Change last argument type to
97 complete_line_internal_reason.
98 Modify function to handle the different complete_line_internal_reason
100 (complete_line): Adapt to change in complete_line_internal.
101 (command_completer): Ditto.
102 (gdb_completion_word_break_characters): Implement new function.
103 * top.c (init_main): Set rl_completion_word_break_hook to
104 gdb_completion_word_break_characters.
107 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
109 ARI fix: "strlen d_name" rule.
110 * linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
113 2009-03-24 Tom Tromey <tromey@redhat.com>
114 Pedro Alves <pedro@codesourcery.com>
116 * configure, config.in: Rebuild.
117 * configure.ac: Check for libiconvlist.
118 * charset.c: Check HAVE_LIBICONVLIST.
119 * acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
120 LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
121 * Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
123 (INTERNAL_CFLAGS_BASE): Update.
124 (INTERNAL_LDFLAGS): Update.
127 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
129 * configure.ac: Initialize the variable $PREFER_CURSES.
130 * configure: Regenerated.
132 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
134 * configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
135 * configure: Regenerated.
137 2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
139 ARI fix: "strerror" rule.
140 * darwin-nat.c (darwin_ptrace): Use safe_strerror.
141 (darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
143 2009-03-23 Joel Brobecker <brobecker@adacore.com>
145 * ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
146 before looking up the fields inside our struct type.
148 2009-03-23 Joel Brobecker <brobecker@adacore.com>
150 * ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
151 trying to resolve the type qualification.
153 2009-03-23 Joel Brobecker <brobecker@adacore.com>
155 * ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
156 we try to apply the attribute on the real type, rather than
157 its associated typedef.
159 2009-03-23 Joel Brobecker <brobecker@adacore.com>
161 * ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
162 to make sure we try to get the modulus of the actual type, not the
165 2009-03-23 Joel Brobecker <brobecker@adacore.com>
167 * ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
168 [OP_ATR_LENGTH]: When using the attribute on a type, make sure
169 to get the real type, not the associated typedef.
171 2009-03-23 Joel Brobecker <brobecker@adacore.com>
173 * ada-lang.c (ada_get_field_index): Add handling of the case
174 when TYPE is a typedef of a struct.
176 2009-03-23 Joel Brobecker <brobecker@adacore.com>
178 Add gdb_usleep as a portable version of usleep based on gdb_select.
179 * gdb_usleep.h, gdb_usleep.c: New files.
180 * Makefile.in (SFILES): Add gdb_usleep.c.
181 (HFILES_NO_SRCDIR): Add gdb_usleep.h.
182 (COMMON_OBS): Add gdb_usleep.o.
183 * ser-unix.c (hardwire_send_break): Replace call to gdb_select
184 by call to gdb_usleep.
186 2009-03-23 Joel Brobecker <brobecker@adacore.com>
188 * buildsym.c (end_symtab): If we ignore the subfiles, then
189 unlink the associated symtabs if they were already allocated.
191 2009-03-23 Jerome Guitton <guitton@adacore.com>
193 Provide a way to force building of GDB with libcurses.
194 * configure.ac: Add --with-curses.
195 * configure: Regenerated.
197 2009-03-23 Tom Tromey <tromey@redhat.com>
199 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
202 2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
204 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
205 solib_contains_address_p instead of searching.
207 2009-03-23 Tom Tromey <tromey@redhat.com>
209 * charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
210 (iconv): Make 'inbuf' argument const.
211 (convert_between_encodings): Use ICONV_CONST.
212 (wchar_iterate): Likewise.
214 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
216 * windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
217 dynamically loaded function.
218 (LookupPrivilegeValueA): Ditto.
219 (OpenProcessToken): Ditto.
220 (AdjustTokenPrivileges): Rename and define placeholder for address of
221 dynamically loaded function.
222 (LookupPrivilegeValueA): Ditto.
223 (OpenProcessToken): Ditto.
224 (set_process_privilege): Remove check for loaded functions.
225 (bad_OpenProcessToken): Define.
226 (_initialize_loadable): Load token functions from advapi here, setting
227 OpenProcessToken function to a dummy static function which always return
228 error if OS doesn't support this functionality.
230 2009-03-22 Nicolas Roche <roche@adacore.com>
231 Christopher Faylor <me+cygwin@cgf.cx>
233 * win32-nat.c (ctrl_c_handler): New function.
234 (win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
235 is run in a separate console.
237 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
239 * windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
240 for dynamically loaded function.
241 (DebugBreakProcess): Ditto.
242 (DebugSetProcessKillOnExit): Ditto.
243 (EnumProcessModules): Ditto.
244 (GetModuleFileNameExA): Ditto.
245 (GetModuleInformation): Ditto.
246 (DebugActiveProcessStop): Rename and define placeholder for address of
247 dynamically loaded function.
248 (DebugBreakProcess): Ditto.
249 (DebugSetProcessKillOnExit): Ditto.
250 (EnumProcessModules): Ditto.
251 (GetModuleFileNameExA): Ditto.
252 (GetModuleInformation): Ditto.
253 (psapi_loaded): Delete.
254 (get_module_name): Don't check psapi_loaded, just rely on the fact that
255 dynamically loaded functions will return failure if they weren't
257 (has_detach_ability): Delete.
258 (windows_attach): Remove call to has_detach_ability (). Just rely on
259 functions being callable.
260 (bad_DebugActiveProcessStop): Define.
261 (bad_DebugBreakProcess): Ditto.
262 (bad_DebugSetProcessKillOnExit): Ditto.
263 (bad_EnumProcessModules): Ditto.
264 (bad_GetModuleFileNameExA): Ditto.
265 (bad_GetModuleInformation): Ditto.
266 (_initialize_loadable): Rename from _initialize_psapi. Initialize all
267 dynamic storage here, setting nonexistent functions to dummy static
268 functions which always return error.
270 2009-03-22 Pedro Alves <pedro@codesourcery.com>
272 * mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
273 to the about_to_proceed observer notification.
274 (mi_about_to_proceed): New.
275 (mi_on_resume): Only output ^running and the prompt here if the
276 target was proceeded.
277 * breakpoint.c (breakpoint_proceeded): New static.
278 (breakpoint_about_to_proceed): New.
279 (_initialize_breakpoints): Attach breakpoint_about_to_proceed to
280 the about_to_proceed observer notification.
281 * inferior.h (breakpoint_proceeded): Delete declaration.
282 * infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
283 Notify the about_to_proceed observers.
284 (struct inferior_status): Delete breakpoint_proceeded member.
285 (save_inferior_status): Don't save it.
286 (restore_inferior_status): Don't restore it.
287 * mi-main.h (mi_proceeded): Declare.
288 * mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
291 2009-03-22 Pedro Alves <pedro@codesourcery.com>
293 * gdbthread.h (struct thread_info): Add in_infcall member.
294 * infcall.c (run_inferior_call): Save, set and restore in_infcall.
295 Remove reverences to suppress_resume_observer. Refresh
296 `call_thread' after returning from `proceed'.
297 * infcmd.c (suppress_resume_observer): Delete.
298 * inferior.h (suppress_resume_observer): Delete declaration.
299 * mi/mi-interp.c (mi_on_resume): Suppress output while calling an
301 * thread.c (set_running): Remove references to
302 suppress_resume_observer.
303 * infrun.c (struct inferior_status): Add in_infcall member.
304 (save_inferior_status): Save it.
305 (restore_inferior_status): Restore it.
307 2009-03-22 Pedro Alves <pedro@codesourcery.com>
309 * infcall.c (run_inferior_call): Remove references to
310 suppress_stop_observer.
311 * infcmd.c (suppress_stop_observer): Delete.
312 (finish_command_continuation): Remove NOTE. Don't clear
313 suppress_stop_observer anymore.
314 (finish_command_continuation_free_arg): Likewise.
315 (finish_forward): Remove references to suppress_stop_observer.
316 Call normal_stop observer if we haven't already.
317 * inferior.h (suppress_stop_observer): Delete.
318 * infrun.c (normal_stop): When deciding to suppress the
319 normal_stop observer, check for proceed_to_finish instead of
320 suppress_stop_observer.
322 2009-03-22 Pedro Alves <pedro@codesourcery.com>
324 * symfile.c (symfile_relocate_debug_section): Remove check for
327 2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
328 Jim Blandy <jimb@red-bean.com>
329 Thiago Jung Bauermann <bauerman@br.ibm.com>
330 Tom Tromey <tromey@redhat.com>
332 Miscellaneous fixes to the Python code.
333 * python/python-cmd.c (cmdpy_init): Accept keyword
335 * python/python-value.c (valpy_string): Accept keyword
337 (valpy_binop): Use `break' to exit from the TRY_CATCH block.
338 Do not call value_to_value_object on NULL RES_VAL.
339 (value_object_methods): Change `string' entry to also accept
341 (convert_value_from_python): Return a copy of the value if obj is
343 (value_object_methods): Mark the `string' method as accepting
344 keywords, and show method "prototype" in the doc string.
345 * python/python.c (get_parameter): Don't return inside a
348 2009-03-20 Tom Tromey <tromey@redhat.com>
350 Add support for convenience functions in Python.
351 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
352 (SUBDIR_PYTHON_SRCS): Add python-function.c.
353 (python-function.o): New target.
354 * eval.c: Include "python/python.h" and <ctype.h>.
355 (evaluate_subexp_standard): Handle values of type
356 TYPE_CODE_INTERNAL_FUNCTION.
357 * gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
358 * parse.c (write_exp_string): Remove duplicate word in comment.
359 * python/python-function.c: New file.
360 * python/python-internal.h (gdbpy_initialize_functions): Add
362 * python/python.c (_initialize_python): Call
363 gdbpy_initialize_functions.
364 * valprint.c (value_check_printable): Handle values of type
365 TYPE_CODE_INTERNAL_FUNCTION.
366 * value.c: Include "cli/cli-decode.h".
367 (internal_function): New struct.
368 (functionlist, internal_fn_type): New static variables.
369 (lookup_only_internalvar,
370 lookup_internalvar): Add const qualifier to name argument.
371 (create_internalvar): Likewise. Initialize new field.
372 (set_internal_var): Fix typo in comment. Don't allow assignment
373 to canonical variable.
374 (value_create_internal_function, value_internal_function_name,
375 call_internal_function, function_command, function_destroyer,
376 add_internal_function): New functions.
377 (_initialize_values): Create `function' placeholder command.
378 Initialize internal_fn_type.
379 * value.h (lookup_only_internalvar, create_internalvar,
380 lookup_internalvar): Add const qualifier to name argument.
381 (internal_function_fn, add_internal_function, call_internal_function,
382 value_internal_function_name): Add prototypes.
383 (struct internalvar) <canonical>: New field.
385 2009-03-20 Tom Tromey <tromey@redhat.com>
387 * c-lang.c (evaluate_subexp_c): Call check_typedef.
389 2009-03-20 Tom Tromey <tromey@redhat.com>
390 Julian Brown <julian@codesourcery.com>
392 PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
393 PR i18n/9401, PR exp/9613:
395 * value.h (value_typed_string): Declare.
396 (val_print_string): Update.
397 * valprint.h (print_char_chars): Update.
398 * valprint.c (print_char_chars): Add type argument. Update.
399 (val_print_string): Likewise.
400 * valops.c (value_typed_string): New function.
401 * utils.c (host_char_to_target): New function.
402 (parse_escape): Use host_char_to_target, host_hex_value. Update.
404 (no_control_char_error): Remove.
405 * typeprint.c (print_type_scalar): Update.
406 * scm-valprint.c (scm_scmval_print): Update.
407 * scm-lang.h (scm_printchar, scm_printstr): Update.
408 * scm-lang.c (scm_printchar): Add type argument.
409 (scm_printstr): Likewise.
410 * printcmd.c (print_formatted): Update.
411 (print_scalar_formatted): Update.
412 (printf_command) <wide_string_arg, wide_char_arg>: New constants.
413 Handle '%lc' and '%ls'.
414 * parser-defs.h (struct typed_stoken): New type.
415 (struct stoken_vector): Likewise.
416 (write_exp_string_vector): Declare.
417 * parse.c (write_exp_string_vector): New function.
418 * p-valprint.c (pascal_val_print): Update.
419 * p-lang.h (is_pascal_string_type, pascal_printchar,
420 pascal_printstr): Update.
421 * p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
422 Add 'char_type' argument.
423 (pascal_emit_char): Add type argument.
424 (pascal_printchar): Likewise.
425 (pascal_printstr): Likewise.
426 * objc-lang.c (objc_emit_char): Add type argument.
427 (objc_printchar): Likewise.
428 (objc_printstr): Likewise.
429 * macroexp.c (get_character_constant): Handle unicode characters.
431 (get_string_literal): Handle unicode strings. Use
433 * m2-valprint.c (print_unpacked_pointer): Update.
434 (m2_print_array_contents): Update.
435 (m2_val_print): Update.
436 * m2-lang.c (m2_emit_char): Add type argument.
437 (m2_printchar): Likewise.
438 (m2_printstr): Likewise.
439 * language.h (struct language_defn) <la_printchar>: Add type
441 <la_printstr, la_emitchar>: Likewise.
442 (LA_PRINT_CHAR): Likewise.
443 (LA_PRINT_STRING): Likewise.
444 (LA_EMIT_CHAR): Likewise.
445 * language.c (unk_lang_emit_char): Add type argument.
446 (unk_lang_printchar): Likewise.
447 (unk_lang_printstr): Likewise.
448 * jv-valprint.c (java_val_print): Update.
449 * jv-lang.c (java_emit_char): Add type argument.
450 * f-valprint.c (f_val_print): Update.
451 * f-lang.c (f_emit_char): Add type argument.
452 (f_printchar): Likewise.
453 (f_printstr): Likewise.
454 * expprint.c (print_subexp_standard): Update.
455 * charset.h (target_wide_charset): Declare.
456 (c_target_char_has_backslash_escape, c_parse_backslash,
457 host_char_print_literally, host_char_to_target,
458 target_char_to_host, target_char_to_control_char): Remove.
459 (enum transliterations): New type.
460 (convert_between_encodings): Declare.
461 (HOST_ESCAPE_CHAR): New define.
462 (host_letter_to_control_character, host_hex_value): Declare.
463 (enum wchar_iterate_result): New enum.
464 (struct wchar_iterator): Declare.
465 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
466 wchar_push_back): Declare.
467 * charset-list.h: New file.
468 * c-valprint.c (textual_name): New function.
469 (textual_element_type): Handle wide character types.
470 (c_val_print): Pass original type to textual_element_type. Handle
471 wide character types.
472 (c_value_print): Use textual_element_type. Pass original type of
474 * c-lang.h (enum c_string_type): New type.
475 (c_printchar, c_printstr): Update.
476 * c-lang.c (classify_type): New function.
477 (print_wchar): Likewise.
478 (c_emit_char): Add type argument. Handle wide characters.
479 (c_printchar): Likewise.
480 (c_printstr): Add type argument. Handle wide and multibyte
482 (convert_ucn): New function.
483 (emit_numeric_character): Likewise.
484 (convert_octal): Likewise.
485 (convert_hex): Likewise.
486 (ADVANCE): New macro.
487 (convert_escape): New function.
488 (parse_one_string): Likewise.
489 (evaluate_subexp_c): Likewise.
490 (exp_descriptor_c): New global.
491 (c_language_defn): Use exp_descriptor_c.
492 (cplus_language_defn): Likewise.
493 (asm_language_defn): Likewise.
494 (minimal_language_defn): Likewise.
495 (charset_for_string_type): New function.
496 * c-exp.y (%union): Add 'svec' and 'tsval'.
498 (exp): Add CHAR production.
499 (string_exp): Rewrite.
500 (exp) <string_exp>: Rewrite.
501 (tempbuf): Now global.
502 (tempbuf_init): New global.
503 (parse_string_or_char): New function.
504 (yylex) <tempbuf>: Now global.
505 <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
507 Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
508 (c_parse_escape): New function.
509 * auxv.c (fprint_target_auxv): Update.
510 * ada-valprint.c (ada_emit_char): Add type argument.
511 (ada_printchar): Likewise.
512 (ada_print_scalar): Update.
513 (printstr): Add type argument. Update calls to ada_emit_char.
514 (ada_printstr): Add type argument.
515 (ada_val_print_array): Update.
516 (ada_val_print_1): Likewise.
517 * ada-lang.c (emit_char): Add type argument.
518 * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
520 * gdb_locale.h: Include langinfo.h.
521 * charset.c (_initialize_charset): Set default host charset from
522 the locale. Don't register charsets. Add target-wide-charset
523 commands. Call find_charset_names.
524 (struct charset, struct translation): Remove.
525 (GDB_DEFAULT_HOST_CHARSET): Remove.
526 (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
527 (target_wide_charset_name): New global.
528 (show_host_charset_name): Handle "auto".
529 (show_target_wide_charset_name): New function.
530 (host_charset_enum, target_charset_enum): Remove.
531 (charset_enum): New global.
532 (all_charsets, register_charset, lookup_charset, all_translations,
533 register_translation, lookup_translation): Remove.
534 (simple_charset, ascii_print_literally, ascii_to_control): Remove.
535 (iso_8859_print_literally, iso_8859_to_control,
536 iso_8859_family_charset): Remove.
537 (ebcdic_print_literally, ebcdic_to_control,
538 ebcdic_family_charset): Remove.
539 (struct cached_iconv, check_iconv_cache, cached_iconv_convert,
540 register_iconv_charsets): Remove.
541 (target_wide_charset_be_name, target_wide_charset_le_name): New
543 (identity_either_char_to_other): Remove.
544 (set_be_le_names, validate): New functions.
545 (backslashable, backslashed, represented): Remove.
546 (default_c_target_char_has_backslash_escape): Remove.
547 (default_c_parse_backslash, iconv_convert): Remove.
548 (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
549 ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
550 iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
551 ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
552 ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
553 ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
554 (table_convert_char, table_translation, simple_table_translation):
556 (current_host_charset, current_target_charset,
557 c_target_char_has_backslash_escape_func,
558 c_target_char_has_backslash_escape_baton): Remove.
559 (c_parse_backslash_func, c_parse_backslash_baton): Remove.
560 (host_char_to_target_func, host_char_to_target_baton): Remove.
561 (target_char_to_host_func, target_char_to_host_baton): Remove.
562 (cached_iconv_host_to_target, cached_iconv_target_to_host):
564 (lookup_charset_or_error, check_valid_host_charset): Remove.
565 (set_host_and_target_charsets): Remove.
566 (set_host_charset, set_target_charset): Remove.
567 (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
568 (set_target_wide_charset_sfunc): New function.
569 (show_charset): Print target wide character set.
570 (host_charset, target_charset): Rewrite.
571 (target_wide_charset): New function.
572 (c_target_char_has_backslash_escape): Remove.
573 (c_parse_backslash): Remove.
574 (host_letter_to_control_character): New function.
575 (host_char_print_literally): Remove.
576 (host_hex_value): New function.
577 (target_char_to_control_char): Remove.
578 (cleanup_iconv): New function.
579 (convert_between_encodings): New function.
580 (target_char_to_host): Remove.
581 (struct wchar_iterator): Define.
582 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
583 wchar_push_back): New functions.
584 (do_cleanup_iterator): New function.
585 (char_ptr): New typedef.
586 (charsets): New global.
587 (add_one, find_charset_names): New functions.
588 (default_charset_names): New global.
589 (auto_host_charset_name): Likewise.
590 * aclocal.m4, config.in, configure: Rebuild.
591 * configure.ac: Call AM_LANGINFO_CODESET.
592 (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
593 (AM_ICONV): Invoke earlier.
594 * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
595 LIBICONV_LIBDIR. Check for libiconv in build tree.
596 * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
597 (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
598 (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
599 * gdb_obstack.h (obstack_grow_wstr): New define.
600 * gdb_wchar.h: New file.
601 * defs.h: Include it.
603 2009-03-20 Tom Tromey <tromey@redhat.com>
604 Jan Kratochvil <jan.kratochvil@redhat.com>
606 * dwarf2read.c (process_die): Handle DW_TAG_typedef.
607 * eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
609 * ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
611 * ada-typeprint.c (print_array_type): Do the NULL check
614 2009-03-19 Tom Tromey <tromey@redhat.com>
616 * utils.c (do_obstack_free): New function.
617 (make_cleanup_obstack_free): Likewise.
618 * defs.h (make_cleanup_obstack_free): Declare.
620 2009-03-18 Doug Evans <dje@google.com>
622 * linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
623 int, not a long long.
624 (linux_nat_info_proc_cmd): Store pid in long instead of long long.
626 * expprint.c (dump_raw_expression): Print note if non-NULL.
628 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
631 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
633 * Makefile.in: Update license to GPLv3.
634 * ada-exp.y: Update license to GPLv3.
635 * ada-lex.l: Update license to GPLv3.
636 * c-exp.y: Update license to GPLv3.
637 * cp-name-parser.y: Update license to GPLv3.
638 * darwin-nat-info.c: Update license to GPLv3.
639 * f-exp.y: Update license to GPLv3.
640 * gdb_thread_db.h: Update license to GPLv3.
641 * hppanbsd-nat.c: Update license to GPLv3.
642 * hppanbsd-tdep.c: Update license to GPLv3.
643 * hppaobsd-tdep.c: Update license to GPLv3.
644 * jv-exp.y: Update license to GPLv3.
645 * m2-exp.y: Update license to GPLv3.
646 * objc-exp.y: Update license to GPLv3.
647 * p-exp.y: Update license to GPLv3.
648 * reply_mig_hack.awk: Update license to GPLv3.
649 * reverse.c: Update license to GPLv3.
650 * xtensa-xtregs.c: Update license to GPLv3.
652 2009-03-18 Pedro Alves <pedro@codesourcery.com>
654 * remote.c (remote_close): Don't call generic_mourn_inferior.
655 (remote_mourn_1): Call generic_mourn_inferior after closing the
658 2009-03-18 Pedro Alves <pedro@codesourcery.com>
660 * remote.c (remote_start_remote): Add missing call to
661 init_wait_for_inferior in non-stop mode.
663 2009-03-18 Pedro Alves <pedro@codesourcery.com>
665 * breakpoint.c (bpstat_should_step): Only consider software
666 watchpoints that have a location.
668 2009-03-17 Joel Brobecker <brobecker@adacore.com>
670 Add a target_ops parameter to the to_kill method in struct target_ops.
672 * target.h (struct target_ops): Add a "target_ops *" parameter to
674 (target_kill): Remove macro. Add declaration.
675 * target.c (debug_to_kill): Delete, no longer necessary.
676 (target_kill): New function.
677 (update_current_target): Stop inheriting the to_kill method.
678 Do not de_fault it to no_process either.
679 (setup_target_debug): Do not set current_target.to_kill.
680 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
681 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
682 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
685 2009-03-17 Doug Evans <dje@google.com>
687 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
688 glibc 2.3.2 and earlier.
690 2009-03-17 Joel Brobecker <brobecker@adacore.com>
692 * frame.c (get_prev_frame_1): Do not perform the inner_frame
693 sanity check if this_frame is not NORMAL.
694 (frame_id_inner): Update the description of this function.
696 2009-03-17 Hui Zhu <teawater@gmail.com>
698 * stack.c: Change the introduce of "disassemble-next-line".
700 2009-03-17 Pedro Alves <pedro@codesourcery.com>
702 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
705 2009-03-17 Hui Zhu <teawater@gmail.com>
707 * stack.c: Include valprint.h.
708 (disassemble_next_line): New enum.
709 (show_disassemble_next_line): New function. Show the current
710 value of disassemble-next-line.
711 (gdb_disassembly_stub_args): New struct for argument passing
712 between function do_gdb_disassembly and function
713 gdb_disassembly_stub.
714 (gdb_disassembly_stub): New function. Helper for
716 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
717 the exception from the gdb_disassembly because it will be
718 broken by filter sometime.
719 (print_frame_info): If disassemble-next-line is set to auto
720 or on and doesn't have the line debug messages for $pc,
721 output the next instruction.
722 If disassemble-next-line is set to on and there is line debug
723 messages, output assembly codes for next line.
724 (_initialize_stack): Make the "set disassemble-next-line"
725 command an auto-boolean command. Change its class to
726 class_stack. Place it in the top level set list. Extend help
727 to describe the auto mode.
729 2009-03-17 Pedro Alves <pedro@codesourcery.com>
731 * infrun.c (normal_stop): Don't overwrite old_chain.
733 2009-03-16 Joel Brobecker <brobecker@adacore.com>
735 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
736 which is undefined, by call to regcache_invalidate, which should
737 do what the original author wanted to do.
739 2009-03-16 Joel Brobecker <brobecker@adacore.com>
741 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
742 (mips_create_inferior): Likewise.
744 2009-03-16 Joel Brobecker <brobecker@adacore.com>
746 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
748 2009-03-16 Joel Brobecker <brobecker@adacore.com>
750 * darwin-nat.c (darwin_resume): Fix a compiler warning when
751 building on x86_64-darwin.
753 2009-03-16 Tristan Gingold <gingold@adacore.com>
755 * configure.tgt: Add handling for x86_64-darwin.
757 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
759 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
761 2009-03-15 Joel Brobecker <brobecker@adacore.com>
763 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
764 Use the ops parameter to get to the target beneath, rather than
765 using the current_target global. Using the current_target global
766 was an unintended accident.
768 2009-03-15 Joel Brobecker <brobecker@adacore.com>
770 Fix an error happening while loading symbols from a core file
773 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
774 to detect whether we're debugging a core file or not.
776 2009-03-15 Joel Brobecker <brobecker@adacore.com>
778 Modernize the aix-thread later by getting rid of the base_target
779 global. This brings back to life the AIX port which was otherwise
780 crashing all the time.
782 * aix-thread.c (base_target): Delete.
783 (pd_enable): Do not set base_target.
784 (aix_thread_attach): Use find_target_beneath instead of base_target.
785 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
786 (aix_thread_fetch_registers, aix_thread_store_registers),
787 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
788 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
789 (aix_thread_kill): Delete. Does not seem necessary.
790 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
792 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
794 * stack.c (return_command <retval_exp>): New variables retval_expr
795 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
796 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
797 if RETURN_TYPE is NULL.
800 2009-03-14 Pedro Alves <pedro@codesourcery.com>
802 * remote.c (PACKET_qAttached): New.
803 (remote_query_attached): New.
804 (remote_add_inferior): Add new `attached' argument. Handle it.
805 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
806 -1 to remote_add_inferior in new parameter.
807 (extended_remote_attach_1): Adjust to pass 1 to
808 remote_add_inferior in the new parameter.
809 (extended_remote_create_inferior_1): Adjust to pass 0 to
810 remote_add_inferior in the new parameter.
811 (_initialize_remote): Add "set/show remote query-attached-packet"
814 2009-03-13 Tom Tromey <tromey@redhat.com>
816 * symtab.c (lookup_symbol_in_language): Use a cleanup.
818 2009-03-13 Doug Evans <dje@google.com>
820 * exceptions.h: Clean up some comments on catch_exceptions usage.
821 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
824 2009-02-17 Joel Brobecker <brobecker@adacore.com>
826 The following patch helps getting rid of a warning inside solib-som.c.
828 * source.c (source_full_path_of): Constify parameter filename.
829 * defs.h (source_full_path_of): Update declaration accordingly.
831 2009-03-12 Joel Brobecker <brobecker@adacore.com>
833 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
834 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
835 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
837 2009-03-12 Joel Brobecker <brobecker@adacore.com>
839 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
840 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
842 2009-03-12 Joel Brobecker <brobecker@adacore.com>
844 * ada-tasks.c (ada_task_is_alive): Move up and make static.
845 * ada-lang.h (ada_task_is_alive): Remove declaration.
847 2009-03-12 Jerome Guitton <guitton@adacore.com>
849 * ada-lang.c (ada_delta): Change the type of numerators and
850 denominators to DOUBLEST, as they may not fit into a long.
851 (scaling_factor): Ditto.
853 2009-03-12 Jerome Guitton <guitton@adacore.com>
855 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
857 2009-03-12 Joel Brobecker <brobecker@adacore.com>
859 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
860 types, if we are unable to determine the actual symbol type
861 from its tag, then use the static approximation instead.
863 2009-03-12 Joel Brobecker <brobecker@adacore.com>
865 Fix crash printing packed record with packed array.
867 * ada-lang.c (ada_modulus_from_name): New function.
868 (ada_modulus): In the case where the type length is bigger than
869 the size of the type used to hold the bounds, try determining
870 the modulus from the type name.
871 (ada_value_primitive_packed_val): Fix bug in the computation of
872 ntarg causing an out-of-buffer invalid access.
874 2009-03-12 Joel Brobecker <brobecker@adacore.com>
876 Fix segfault when printing short_integer'last.
878 * ada-lang.c (ada_find_any_type): Search in the primitive types
879 if a symbol could not be found.
881 2009-03-12 Joel Brobecker <brobecker@adacore.com>
883 * ada-tasks.c (task_states,long_task_states): Add new states
884 Activating and Acceptor_Delay_Sleep. Update the description
885 of state Acceptor_Sleep.
887 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
889 Fix a build failure on Darwin following some changes in
890 the profile of some target_ops methods.
892 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
894 (darwin_stop_inferior, darwin_detach): Likewise.
896 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
898 Include token in ^running notification for CLI commands.
900 * mi/mi-main.c (mi_execute_command): Set current_token here.
901 (mi_cmd_execute): Do not set current_token here.
903 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
907 * mi/mi-main.c (mi_print_timing_maybe): New.
908 (captured_mi_execute_command): Simplify. Output timings to
910 (mi_execute_async_cli_command): Do not print timings.
911 * mi/mi-main.h (mi_print_timing_maybe): Declare.
912 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
914 2009-03-12 Jerome Guitton <guitton@adacore.com>
916 * xcoffread.c (process_linenos): Check if the line in the
917 include table refers to the main source file and, if so,
918 add them to the main subfile.
920 2009-03-12 Joel Brobecker <brobecker@adacore.com>
922 Fix a build failure on AIX introduced after a change in the profile
923 of some of the "methods" in the target_ops structure.
924 * aix-thread.c: Add missing target_ops parameter throughout.
926 Implement Ada task switching on AIX.
927 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
928 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
930 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
932 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
933 value_mark and value_free_to_mark.
934 * objfiles.c (free_objfile): Call objfile_free_data before
937 2009-03-10 Hui Zhu <teawater@gmail.com>
939 * disasm.c (gdb_disassembly): Remove unused argument
941 * disasm.h (gdb_disassembly): Ditto.
942 * cli/cli-cmds.c (print_disassembly): Ditto.
943 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
945 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
947 * solib.c (solib_contains_address_p): New function.
948 (solib_name_from_address): Use it.
949 * printcmd.c (display_uses_solib_p): Use it.
950 * solib.h (solib_contains_address_p): Declare it.
952 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
954 * varobj.c (free_variable): Call value_free.
956 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
959 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
960 Move the variable `macinfo_type' out of the loop. Create a new
961 processing pass before the current one to pre-create `current_file'.
962 New complaint on misplaced zero/non-zero definitions/includes.
963 Skip first DW_MACINFO_start_file with `at_commandline' set.
965 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
967 * solib.c (reload_shared_libraries): Give
968 inferior a chance to reset solib breakpoint.
971 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
973 * windows-nat.c (dr): Redefine to use largest possible integer which
975 (cygwin_set_dr): Avoid coercion.
977 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
979 * windows-nat.c (windows_create_inferior): Implement --tty handling on
982 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
984 Rename solib_address to solib_name_from_address.
985 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
986 (disable_breakpoints_in_unloaded_shlib): Update.
987 * printcmd.c (display_uses_solib_p): Likewise.
988 * stack.c (print_frame): Likewise.
992 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
994 * printcmd.c (do_one_display): Reparse exp_string.
995 (display_uses_solib_p): New function.
996 (clear_dangling_display_expressions): New function.
997 (_initialize_printcmd): Add observer.
998 * solib.c (no_shared_libraries): Swap order of calls to
999 clear_solib and objfile_purge_solibs.
1001 2009-03-05 Joel Brobecker <brobecker@adacore.com>
1003 Implement the target-specific part of Ada tasking support
1006 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
1007 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
1009 2009-03-05 Joel Brobecker <brobecker@adacore.com>
1011 Get rid of the global "base_target" and use "find_target_beneath"
1012 to find the underlying target.
1013 * dec-thread.c (base_target): Delete.
1014 (enable_dec_thread): Remove assignement to base_target.
1015 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
1016 (dec_thread_fetch_registers, dec_thread_store_registers)
1017 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
1018 Update the function profile if necessary.
1019 Use find_target_beneath to call the same method but from
1020 the underlying target, removing the need for "base_target".
1022 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
1023 Fix a copy/paste error in a few debug traces...
1025 * solib-osf.c (init_so): Use a simpler method for computing
1026 the size of lm_info structure. This also gets rid of warning
1027 emitted by the compiler.
1029 2009-03-05 Pedro Alves <pedro@codesourcery.com>
1031 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
1032 duplicates of permanent breakpoints.
1034 2009-03-04 Pedro Alves <pedro@codesourcery.com>
1036 * inferior.h (notice_new_inferior): Declare.
1037 * infcmd.c (notice_new_inferior): New.
1038 * remote.c (remote_add_inferior, remote_add_thread): New.
1039 (notice_new_inferiors): Rename to...
1040 (remote_notice_new_inferior): ... this. Add RUNNING argument.
1041 Use remote_add_thread instead of add_thread, passing it the
1042 RUNNING argument. Add an inferior with remote_add_inferior. If
1043 we just learned about an inferior, call notice_new_inferior.
1044 (record_currthread): Adjust.
1045 (remote_threads_info): Adjust to use remote_notice_new_inferior.
1046 (remote_start_remote, extended_remote_attach_1): Use
1047 remote_add_inferior.
1048 (process_stop_reply): Adjust. Call remote_notice_new_inferior
1049 after handling expedited registers and watchpoint state.
1050 (extended_remote_create_inferior_1): Use remote_add_inferior.
1052 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
1054 * infcmd.c (registers_info): Remove register number case.
1056 2009-03-03 Pedro Alves <pedro@codesourcery.com>
1058 * top.c (quit_target): Check for target_has_execution before
1059 killing or detaching from inferiors.
1061 2009-03-02 Joel Brobecker <brobecker@adacore.com>
1063 Remove some unused routines.
1065 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
1067 * ada-lang.c (ada_task_list_iterator_ftype)
1068 (iterate_over_live_ada_tasks): Delete.
1069 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
1072 2009-03-01 Doug Evans <dje@google.com>
1074 * symtab.c: Remove trailing whitespace throughout the file.
1075 (expand_line_sal): Fix some typos and whitespace.
1077 * Makefile.in (clean): rm -f $(DEPDIR)/*.
1079 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
1080 (init.c): signals/ -> common/.
1081 (signals.o): Update.
1082 * target.h (target_signal_to_string,target_signal_to_string)
1083 (target_signal_from_name,target_signal_to_host_p)
1084 (target_signal_from_host,target_signal_to_host): Move to ...
1085 * common/gdb_signals.h: ... here. New file.
1086 * common/signals.c: Moved here from signals/signals.c.
1087 #include gdb_signals.h, remove #include of target.h in gdb case.
1088 (target_signal_from_command,default_target_signal_to_host)
1089 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
1091 Include thread ID in target_wait debugging output.
1092 * infrun.c (print_target_wait_results): New function.
1093 (wait_for_inferior,fetch_inferior_event): Call it.
1095 2009-02-27 Pedro Alves <pedro@codesourcery.com>
1097 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
1098 with a ptid_t field.
1099 * linux-thread-db.c (thread_get_info_callback): Build the ptid
1100 using the pid stored in proc_handle.ptid.
1101 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
1102 (check_for_thread_db, thread_db_detach, check_event)
1103 (thread_db_mourn_inferior, find_new_threads_callback)
1104 (thread_db_find_new_threads_1): Adjust.
1105 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
1106 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
1108 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
1110 * valprint.c (read_string): Rework clean-up logic. Use
1111 free_current_contents to clean-up buffer.
1113 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
1115 * MAINTAINERS: Update e-mail address.
1117 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
1119 * python/python-utils.c (python_string_to_unicode): Always return
1121 (python_string_to_target_string): Decrement transient python
1123 (python_string_to_host_string): Likewise.
1125 2007-02-26 Pedro Alves <pedro@codesourcery.com>
1127 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
1128 call to super_fetch_registers.
1129 (mips64_linux_store_registers): Pass `ops' to call to
1130 super_store_registers.
1132 2009-02-25 Doug Evans <dje@google.com>
1134 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
1137 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
1138 disabled_shlib_breaks, unused.
1140 * printcmd.c (build_address_symbolic): Fix comment.
1142 2009-02-25 Hui Zhu <teawater@gmail.com>
1144 * cli/cli-script.c (define_command): Add _() to query.
1145 * gnu-nat.c (inf_validate_task_sc): Ditto.
1146 * infcmd.c (kill_if_already_running): Ditto.
1147 (jump_command): Ditto.
1148 (attach_command): Ditto.
1149 * inflow.c (kill_command): Ditto.
1150 * infrun.c (handle_command): Ditto.
1151 * maint.c (maintenance_dump_me): Ditto.
1152 * memattr.c (mem_delete_command): Ditto.
1153 * monitor.c (monitor_interrupt_query): Ditto.
1154 * nto-procfs.c (interrupt_query): Ditto.
1155 * printcmd.c (undisplay_command): Ditto.
1156 * remote-mips.c (mips_kill): Ditto.
1157 * remote.c (interrupt_query): Ditto.
1158 * solib-irix.c (irix_open_symbol_file_object): Ditto.
1159 * solib-osf.c (osf_open_symbol_file_object): Ditto.
1160 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
1161 * solib-som.c (som_open_symbol_file_object): Ditto.
1162 * solib-svr4.c (open_symbol_file_object): Ditto.
1163 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
1164 * target.c (kill_or_be_killed): Ditto.
1165 * tracepoint.c (delete_trace_command): Ditto.
1166 * top.c (quit_confirm): Add _() to s that will be used
1169 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
1171 Fix windows-nat.c compilation failure.
1173 * windows-nat.c (windows_thread_alive): Fix forward declaration.
1174 (get_windows_debug_event): Add ops parameter to call to windows_resume.
1176 2009-02-23 Pedro Alves <pedro@codesourcery.com>
1178 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
1180 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
1182 * symtab.c (find_line_symtab): Initialize exact to avoid
1185 2009-02-23 Pedro Alves <pedro@codesourcery.com>
1187 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
1188 `ops' to recursive call.
1190 2009-02-23 Pedro Alves <pedro@codesourcery.com>
1192 * corelow.c (get_core_registers): Adjust.
1193 (core_file_thread_alive): Rename to...
1194 (core_thread_alive): ... this.
1195 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
1196 (init_core_ops): Adjust.
1197 (coreops_suppress_target): Delete.
1198 (_initialize_corelow): Unconditionally add core_ops.
1199 * procfs.c: Include "inf-child.h".
1200 (procfs_ops): Delete.
1201 (init_procfs_ops): Delete. Reimplement as...
1202 (procfs_target): ... this, inheriting from inf-child.
1203 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
1204 (procfs_prepare_to_store): Delete.
1205 (procfs_store_registers, procfs_resume): Adjust.
1206 (procfs_open): Delete.
1207 (procfs_suppress_run): Delete.
1208 (procfs_can_run): Delete.
1209 (procfs_mourn_inferior): Adjust.
1210 (procfs_init_inferior): Add target_ops parameter. Adjust.
1211 (procfs_create_inferior): Don't pass procfs_init_inferior to
1212 fork_inferior. Instead call it after fork_inferior returns.
1213 (procfs_find_new_threads): Adjust.
1214 (_initialize_procfs): Adjust to use procfs_target instead of
1216 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
1217 (lwp_to_thread): Use target_thread_alive.
1218 (sol_thread_open): Delete.
1219 (sol_thread_attach): Delete.
1220 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
1221 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
1222 to use find_target_beneath.
1223 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
1224 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
1225 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
1226 (check_for_thread_db): New.
1227 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
1228 (sol_thread_new_objfile): Call check_for_thread_db.
1229 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
1230 (sol_thread_can_run): Delete.
1231 (sol_thread_alive): Adjust to use find_target_beneath.
1232 (sol_thread_stop): Delete.
1233 (rw_common): Use target_write_memory or target_read_memory.
1234 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
1235 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
1236 (solaris_pid_to_str): Remove check for libthread_db initialization
1238 (sol_find_new_threads): Remove check for libthread_db
1239 initialization failing, or for an invalid inferior_ptid. Adjust
1240 to use find_target_beneath.
1241 (sol_core_open, sol_core_close, sol_core_detach,
1242 sol_core_files_info, sol_find_memory_regions,
1243 sol_make_note_section, ignore): Delete.
1244 (init_sol_thread_ops): Make it a thread_stratum target. Remove
1245 unneeded callback settings.
1246 (init_sol_core_ops): Delete.
1247 (_initialize_sol_thread): No longer call init_sol_core_ops, set
1248 procfs_suppress_run, or hack with core_ops.
1250 * target.h (struct target_ops): Add a target_ops * parameter to
1251 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
1252 and to_find_new_threads.
1253 (target_fetch_registers, target_store_registers)
1254 (target_thread_alive, target_find_new_threads): Redeclare as
1257 * target.c (update_current_target): Do not inherit or de_fault
1258 to_resume, to_fetch_registers, to_store_registers,
1259 to_thread_alive, to_find_new_threads.
1260 (target_resume): Adjust.
1261 (target_thread_alive, target_find_new_threads): New.
1262 (debug_to_resume, debug_to_fetch_registers): Delete.
1263 (target_fetch_registers): New.
1264 (debug_to_store_registers): Delete.
1265 (target_store_registers): New.
1266 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
1267 (setup_target_debug): Adjust.
1269 * gdbcore.h (core_ops): Delete declaration.
1271 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
1272 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
1273 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
1274 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
1275 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
1276 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
1277 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
1278 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
1279 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
1280 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
1281 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
1282 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
1283 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
1284 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
1286 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
1287 * gdbarch.h, gdbarch.c: Regenerate.
1289 * sol2-tdep.c: Include "inferior.h".
1290 (sol2_core_pid_to_str): New.
1291 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
1293 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
1294 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
1295 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
1296 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
1298 2009-02-22 Doug Evans <dje@google.com>
1300 * exec.c (exec_file_attach): Fix comment.
1302 2009-02-22 Pedro Alves <pedro@codesourcery.com>
1304 Silence a few -Wmissing-prototypes warnings.
1307 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
1309 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
1310 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
1311 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
1312 (_initialize_amd64nbsd_tdep): ... this.
1313 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
1314 (_initialize_arm_linux_tdep): Declare.
1315 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
1316 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
1317 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
1318 * avr-tdep.c (avr_return_value): Make it static.
1319 (avr_frame_unwind_cache): Ditto.
1320 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
1321 (bsd_uthread_solib_loaded): Ditto.
1322 (bsd_uthread_solib_unloaded): Ditto.
1323 (bsd_uthread_target): Ditto.
1324 (_initialize_bsd_uthread): Declare.
1325 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
1326 (cris_frame_unwind_cache): Ditto.
1327 * frv-tdep.c (frv_return_value): Ditto.
1328 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
1329 (h8300h_use_struct_convention): Ditto.
1330 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
1332 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
1334 * hppabsd-tdep.c: Include hppabsd-tdep.h.
1335 (hppabsd_find_global_pointer): Make it static.
1336 * hppabsd-tdep.h: New.
1337 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
1338 (hppabsd_init_abi): Remove declaration.
1339 (_initialize_hppabsd_tdep): Remove declaration.
1340 (_initialize_hppanbsd_tdep): Declare.
1341 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
1342 (hppabsd_init_abi): Delete declaration.
1343 (hppaobsd_init_abi): Make it static.
1344 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
1345 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
1346 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
1347 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
1348 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
1349 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
1350 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
1351 (_initialize_m32c_tdep): Declare.
1352 * m32r-rom.c (_initialize_m32r_rom): Declare.
1353 * m32r-tdep.c (m32r_skip_prologue): Make it static.
1354 (m32r_return_value): Ditto.
1355 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
1356 (m68hc11_return_value): Ditto.
1357 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
1358 * m88k-tdep.c (m88k_frame_cache): Make it static.
1359 * mep-tdep.c (mep_gdb_print_insn): Ditto.
1360 (mep_return_value): Ditto.
1361 (_initialize_mep_tdep): Declare.
1362 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
1363 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
1364 (mips_linux_syscall_next_pc): Ditto.
1365 (_initialize_mips_linux_tdep): Declare.
1366 * mips-tdep.c (mips_single_step_through_delay): Make it static.
1367 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
1368 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
1369 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
1370 * mt-tdep.c (_initialize_mt_tdep): Declare.
1371 * nbsd-tdep.c: Include nbsd-tdep.h.
1372 * nto-tdep.c (find_load_phdr): Make it static.
1373 (_initialize_nto_tdep): Declare.
1374 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
1376 (_initialize_ppc_linux_tdep): Declare.
1377 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
1378 (m32r_insert_watchpoint, m32r_remove_watchpoint)
1379 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
1381 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
1382 * rs6000-nat.c: Include xcoffread.h.
1383 (find_toc_address): Don't extern declare get_toc_offset. Adjust
1384 to call xcoff_get_to_offset.
1385 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
1386 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
1387 (rs6000_skip_trampoline_code): Make static.
1388 * s390-tdep.c (s390_regset_from_core_section): Ditto.
1389 * sh-tdep.c (sh_register_reggroup_p): Ditto.
1390 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
1391 (_initialize_shnbsd_tdep): Declare.
1392 * solib-frv.c (displacement_from_map): Make static.
1393 (_initialize_frv_solib): Declare.
1394 * solib-irix.c (fetch_lm_info): Make static.
1395 (_initialize_irix_solib): Declare.
1396 * solib-som.c: Include solib-som.h.
1397 (som_solib_select): Line break.
1398 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
1399 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
1400 (_initialize_sparcnbsd_tdep): ... this.
1401 * spu-tdep.c (spu_software_single_step): Make it static.
1402 (_initialize_spu_tdep): Declare.
1403 * vax-tdep.c (vax_frame_cache): Make it static.
1404 * xcoffread.c: Include xcoffread.h.
1405 (get_toc_offset): Rename to ...
1406 (xcoff_get_toc_offset): ... this.
1407 (_initialize_xcoffread): Declare.
1409 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
1410 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
1412 (_initialize_xtensa_tdep): Declare.
1414 2008-02-21 Pedro Alves <pedro@codesorcery.com>
1416 Silence a few -Wmissing-prototypes warnings.
1419 * amd64-nat.c: Include "amd64-nat.h".
1420 * fork-child.c (_initialize_fork_child): Ditto.
1421 * gcore.c (_initialize_gcore): Ditto.
1422 * inf-ptrace.c: Include "inf-ptrace.h".
1423 (inf_ptrace_store_registers): Make it static.
1424 * linux-nat.c (linux_nat_terminal_ours): Make it static.
1425 (_initialize_linux_nat): Declare before definition.
1426 * linux-tdep.c: Include "linux-tdep.h".
1427 * linux-thread-db.c (_initialize_thread_db): Declare before
1429 * proc-service.c (_initialize_proc_service): Ditto.
1430 * remote.c (remote_send_printf): Make it static.
1431 * solib.c: Include "solib.h".
1432 * symfile-mem.c (_initialize_symfile_mem): Declare before
1434 * ada-lang.c (ada_la_decode, ada_match_name)
1435 (ada_suppress_symbol_printing, ada_is_array_type)
1436 (ada_value_ptr_subscript, ada_array_length)
1437 (ada_to_static_fixed_value): Make them static.
1438 (_initialize_ada_language): Declare before definition.
1439 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
1440 (ada_task_list_changed, ada_new_objfile_observer): Make them
1442 (_initialize_tasks): Declare before definition.
1443 * addrmap.c (_initialize_addrmap): Declare before definition.
1444 * auxv.c (default_auxv_parse): Make it static.
1445 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
1447 * breakpoint.c (remove_sal): Add line break.
1448 (expand_line_sal_maybe): Make it static.
1449 * cp-name-parser.y: Include "cp-support.h".
1450 * cp-valprint.c (cp_find_class_member): Make it static.
1451 * eval.c (value_f90_subarray): Ditto.
1452 * exceptions.c (print_any_exception): Ditto.
1453 * findcmd.c (_initialize_mem_search): Declare before definition.
1454 * frame.c (frame_observer_target_changed): Make it static.
1455 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
1456 * inf-child.c: Include "inf-child.h".
1457 * inferior.h (valid_inferior_id): Rename to ...
1458 (valid_gdb_inferior_id): ... this.
1459 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
1461 * jv-lang.c (java_language_arch_info): Make it static.
1462 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
1463 * osdata.c (info_osdata_command): Make it static.
1464 * regcache.c (regcache_observer_target_changed): Make it static.
1465 * reverse.c (_initialize_reverse): Declare before definition.
1466 * stabsread.c (cleanup_undefined_types_noname)
1467 (cleanup_undefined_types_1): Make them static.
1468 * symfile.c (place_section): Make it static.
1469 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
1470 * target-descriptions.c (_initialize_target_descriptions): Declare
1472 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
1473 (find_default_is_async_p, find_default_supports_non_stop): Make
1475 (target_supports_non_stop): Add prototype.
1476 (dummy_pid_to_str): Make it static.
1477 * utils.c (_initialize_utils): Declare before definition.
1478 * ada-exp.y (_initialize_ada_exp): Declare before definition.
1479 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
1480 * target.h (struct target_ops): Add a prototype to the
1481 to_can_execute_reverse callback.
1482 * macroscope.c (_initialize_macroscope): Declare before definition.
1483 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
1484 * python/python.c (_initialize_python): Declare before definition.
1485 * tui/tui-command.c: Include "tui/tui-command.h".
1486 * tui/tui-data.c (init_content_element, init_win_info): Make them
1488 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
1489 * tui/tui-interp.c (_initialize_tui_interp): Declare before
1491 * tui/tui-layout.c: Include "tui/tui-layout.h".
1492 (_initialize_tui_layout): Declare before definition.
1493 * tui/tui-regs.c: Include "tui/tui-regs.h".
1494 (tui_display_reg_element_at_line): Make it static.
1495 (_initialize_tui_regs): Declare before definition.
1496 * tui/tui-stack.c (_initialize_tui_stack): Declare before
1498 * tui/tui-win.c: Include "tui/tui-win.h".
1499 (_initialize_tui_win): Declare before definition.
1500 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
1501 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
1502 (tui_get_cmd_list): Add a prototype.
1503 * tui/tui-windata.c: Include tui-windata.h.
1504 * tui/tui-wingeneral.c (box_win): Make it static.
1505 * cli/cli-logging.c (show_logging_command): Make it static.
1506 (_initialize_cli_logging): Declare before definition.
1507 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
1510 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
1512 Extend use of i386_use_watchpoints to all i386 native files
1513 using hardware watchpoints.
1514 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
1515 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
1516 * windows-nat.c (init_windows_ops): Ditto.
1517 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
1518 * config/i386/nm-cygwin64.h: Ditto.
1519 * config/i386/nm-fbsd.h: Ditto.
1520 * config/i386/nm-go32.h: Ditto.
1522 2009-02-19 Joel Brobecker <brobecker@adacore.com>
1524 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
1526 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
1528 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
1529 (mi_interpreter_init): Register the above.
1530 * solib.c (clear_solib): Notify solib unload.
1531 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
1532 disable breakpoints on a.out targets.
1534 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
1536 * observer.c (observer_test_first_notification_function)
1537 (observer_test_second_notification_function)
1538 (observer_test_third_notification_function): Adjust prototype.
1540 2009-02-17 Pedro Alves <pedro@codesourcery.com>
1542 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
1543 (ALL_TARGET_OBS): Add dicos-tdep.o.
1544 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
1545 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
1547 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
1549 * dicos-tdep.h, dicos-tdep.c: New.
1550 * amd64-dicos-tdep.c: New.
1551 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
1552 inferior.h. Include dicos-tdep.h.
1553 (i386_dicos_init_abi): Call dicos_init_abi.
1554 (i386_dicos_bfd_has_symbol_p): Delete.
1555 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
1557 * NEWS: Mention x86-64 DICOS target support.
1559 2009-02-16 Doug Evans <dje@google.com>
1561 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
1562 All callers updated.
1563 (amd64_get_insn_details): Handle more 3-byte opcode insns.
1564 (amd64_breakpoint_p): Delete.
1565 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
1566 don't back up pc to the start of the int3.
1567 * i386-tdep.c: #include opcode/i386.h.
1568 (i386_skip_prefixes): New function.
1569 (i386_absolute_jmp_p): Constify argument.
1570 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
1571 (i386_breakpoint_p): Delete.
1572 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
1573 When fixing up after stepping an int3, don't back up pc to the start
1576 2009-02-16 Pedro Alves <pedro@codesourcery.com>
1578 * corelow.c (core_close): Don't hardcode the core's pid.
1579 (core_open): Find core threads before calling
1580 post_create_inferior.
1581 (add_to_thread_list, get_core_register_section): Take into account
1582 systems where the regset section names encode the pid of the
1585 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
1586 * gdbarch.h, gdbarch.c: Regenerate.
1588 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
1589 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
1590 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
1591 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
1593 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
1595 Include frame information for *stopped due to CLI commands.
1597 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
1598 * infcmd.c (finish_command_continuation): Pass '1' for
1599 'print_frame' parameter to the observer.
1600 * infrun.c (normal_stop): Don't print mi-specific information
1601 here. Pass 'stop_print_frame' to the 'print_frame' parameter
1603 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
1604 If we need to print frame, and current uiout is not the MI one,
1607 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
1609 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
1610 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
1612 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
1615 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
1616 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
1618 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
1620 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
1621 for DW_ATE_signed_char and DW_ATE_unsigned_char
1622 for pascal language.
1624 2009-02-11 Jim Meyering <meyering@redhat.com>
1625 Jan Kratochvil <jan.kratochvil@redhat.com>
1627 Avoid NULL dereference.
1628 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
1629 New variable func_type.
1631 2009-02-11 Pedro Alves <pedro@codesourcery.com>
1633 * gdbarch.c: Regenerate.
1635 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
1637 * p-lang.c (is_pascal_string_type): Fix comment.
1638 Determine exact size of char elements for GPC
1640 (pascal_printstr): Handle char width of 2 or 4.
1641 * p-valprint.c (pascal_val_print): Handle char
1644 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
1646 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
1647 inside the loop. Only call addrmap_set_empty if the compilation unit
1648 had DW_AT_high_pc and DW_AT_low_pc. Update call to
1649 scan_partial_symbols.
1650 (scan_partial_symbols): Take NEED_PC argument and pass it along with
1652 (add_partial_namespace): Take NEED_PC argument and pass it through.
1653 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
1656 2009-02-07 Pedro Alves <pedro@codesourcery.com>
1658 * NEWS: Mention inspecting extra signal information, $_siginfo,
1659 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
1661 2009-02-07 Pedro Alves <pedro@codesourcery.com>
1663 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
1666 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1668 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
1669 (compat_timer_t, compat_clock_t, struct compat_timeval)
1670 (compat_sigval_t, compat_siginfo_t): New types.
1671 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
1672 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
1673 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
1674 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
1675 (amd64_linux_siginfo_fixup): New.
1676 * linux-nat.c (linux_nat_siginfo_fixup): New.
1677 (siginfo_fixup): New.
1678 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
1679 siginfo layout expected by ptrace and the siginfo layout of the
1681 (linux_nat_set_siginfo_fixup): New.
1682 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
1684 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1686 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
1687 * infrun.c (siginfo_value_read, siginfo_value_write): New.
1688 (siginfo_value_funcs): New.
1689 (siginfo_make_value): New.
1690 (_initialize_infrun): Create the $_siginfo convenience variable.
1691 * gdbtypes.h (append_composite_type_field_aligned): Declare.
1692 * gdbtypes.c (append_composite_type_field): Rename to...
1693 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
1694 argument. Handle it.
1695 (append_composite_type_field): Rewrite on top of
1696 append_composite_type_field_aligned.
1697 * value.h (internalvar_make_value): New typedef.
1698 (struct internalvar) <make_value>: New field.
1699 (create_internalvar_type_lazy): Declare.
1700 * value.c (create_internalvar): Clear make_value.
1701 (create_internalvar_type_lazy): New.
1702 (value_of_internalvar): If make_value is set use it.
1703 (preserve_values): Skip internal variables that don't have a
1705 * gdbarch.sh (get_siginfo_type): New.
1706 * gdbarch.h, gdbarch.c: Regenerate.
1708 * linux-tdep.h, linux-tdep.c: New.
1709 * amd64-linux-tdep.c: Include "linux-tdep.h".
1710 (amd64_linux_init_abi): Register linux_get_siginfo_type and
1711 linux_get_siginfo_mapper.
1712 * i386-linux-tdep.c: Include "linux-tdep.h".
1713 (i386_linux_init_abi): Register linux_get_siginfo_type and
1714 linux_get_siginfo_mapper.
1715 * arm-linux-tdep.c: Include "linux-tdep.h".
1716 (i386_linux_init_abi): Register linux_get_siginfo_type and
1717 linux_get_siginfo_mapper.
1719 * linux-nat.c (linux_xfer_siginfo): New.
1720 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
1721 * remote.c (PACKET_qXfer_siginfo_read)
1722 (PACKET_qXfer_siginfo_write): New.
1723 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
1724 "qXfer:siginfo:write" features.
1725 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
1726 (_initialize_remote): Add "set/show remote read-siginfo-object"
1727 and "set/show remote write-siginfo-object" commands.
1729 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
1730 (HFILES_NO_SRCDIR): Add linux-tdep.h.
1731 (ALLDEPFILES): Add linux-tdep.c.
1733 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
1734 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
1737 2009-02-06 Jim Blandy <jimb@codesourcery.com>
1738 Daniel Jacobowitz <dan@codesourcery.com>
1739 Vladimir Prus <vladimir@codesourcery.com>
1740 Pedro Alves <pedro@codesourcery.com>
1742 * defs.h (enum lval_type): New value: lval_computed.
1743 * value.h (struct lval_funcs): New type.
1744 (allocate_computed_value, value_computed_funcs)
1745 (value_computed_closure): New declarations.
1746 * value.c (struct value): Add a structure to the location union
1747 for computed lvalues, containing 'funcs' and 'closure' members.
1748 (allocate_computed_value, value_computed_funcs)
1749 (value_computed_closure): New functions.
1750 (value_free): For computed lvalues, call the closure's
1751 'free_closure' function before freeing the value itself.
1752 (value_copy): If we're copying an lval_computed value, call the
1753 closure's 'copy_closure' function.
1754 (set_value_component_location): If the original value is a
1755 computed lvalue, then call the closure's 'copy_closure' function.
1756 (value_of_internalvar): If an internal variable's value is a
1757 computed lvalue, make retrieving its value produce an equivalent
1759 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
1760 their read function.
1761 (value_assign): Assign to computed lvalues by calling their write
1764 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1766 * linux-nat.c (linux_nat_wait): Adjust.
1767 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
1768 * linux-nat.h (thread_db_init): Delete declaration.
1769 * linux-thread-db.c (target_beneath): Delete.
1770 (thread_db_init): Delete.
1771 (thread_db_detach): Use find_target_beneath.
1772 (thread_db_wait): Adjust interface. Use find_target_beneath.
1773 (thread_db_mourn_inferior): Use find_target_beneath.
1774 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
1775 (thread_db_async_mask): Delete.
1776 (thread_db_pid_to_str): Adjust interface. Use
1777 find_target_beneath.
1778 (thread_db_get_thread_local_address): Adjust interface. Use
1779 find_target_beneath.
1780 (init_thread_db_ops): Delete references to delete functions.
1781 * target.c (update_current_target): Don't inherit or default
1782 to_wait. Don't inherit to_pid_to_str and
1783 to_get_thread_local_address.
1784 (target_translate_tls_address): Look for a pushed target that
1785 implements to_get_thread_local_address, and use it instead of
1786 checking for target_get_thread_local_address_p.
1787 (target_wait, target_pid_to_str): Reimplement as functions.
1788 (dummy_pid_to_str): New.
1789 (init_dummy_target): Register it.
1790 (debug_to_wait): Delete.
1791 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
1792 to_get_thread_local_address accept a pointer to struct target_ops.
1793 (target_wait): Delete macro, and declare as function.
1794 (target_pid_to_str): Likewise.
1795 (target_get_thread_local_address)
1796 (target_get_thread_local_address_p): Delete.
1797 (noprocess): Add NORETURN and ATTR_NORETURN tags.
1798 * inf-ptrace.c (inf_ptrace_wait): Adjust.
1799 (inf_ptrace_pid_to_str): New.
1800 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
1801 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
1802 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
1803 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
1805 * corelow.c (core_pid_to_str): Adjust.
1806 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
1807 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
1808 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
1809 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
1810 * hpux-thread.c (hpux_thread_wait): Adjust.
1811 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
1812 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
1813 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
1814 * procfs.c (procfs_pid_to_str): Adjust.
1815 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
1816 * remote-mips.c (mips_wait): Adjust.
1817 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
1818 * remote.c (remote_wait, remote_pid_to_str)
1819 (remote_get_thread_local_address): Adjust.
1820 * rs6000-nat.c (rs6000_wait): Adjust.
1821 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
1822 (sol_thread_wait, solaris_pid_to_str): Adjust.
1823 * spu-linux-nat.c (spu_child_wait): Adjust.
1824 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
1826 2009-02-06 Tom Tromey <tromey@redhat.com>
1828 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
1829 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
1830 (python-cmd.o): New target.
1831 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
1832 completer prototype.
1833 (add_cmd): Initialize destroyer member of cmd_list_element. Use
1834 make_symbol_completion_list_fn as completer.
1835 (delete_cmd): Call destroyer if one is set.
1836 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
1837 completer member. Add destroyer member.
1838 (set_cmd_completer): Add self parameter to
1839 completer prototype.
1840 * command.h (set_cmd_completer): Add cmd parameter to
1841 completer prototype.
1842 * completer.c (noop_completer, filename_completer,
1843 location_completer, expression_completer, command_completer): Adapt
1844 to new completer prototype.
1845 (complete_line_internal): Pass new parameter to completer function.
1846 * completer.h (noop_completer, filename_completer,
1847 location_completer, expression_completer, command_completer): Adapt
1848 prototypes to new completer prototype.
1849 * interps.c (interpreter_completer): Adapt to new completer
1851 * python/python-cmd.c: New file.
1852 * python/python-internal.h (gdbpy_initialize_commands): Add
1854 (gdbpy_doc_cst): Add forward declaration.
1855 * python/python.c (gdbpy_doc_cst): Declare.
1856 (_initialize_python): Call gdbpy_initialize_commands. Initialize
1858 * symtab.c (make_symbol_completion_list_fn): New function.
1859 * symtab.h (make_symbol_completion_list_fn): Add prototype.
1861 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1863 * target.c (target_get_osdata): Check for equal or higher than
1864 process_stratum, not dummy_stratum.
1866 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1868 * remote.c (extended_remote_can_run): Delete.
1869 (init_remote_ops): Don't register it.
1870 * target.c (target_get_osdata): Don't check for target_can_run.
1871 Instead any target that has already been pushed, otherwise
1872 fallback to the default run target.
1874 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1876 * target.c (target_create_inferior, target_detach)
1877 (target_mourn_inferior, target_attach, target_close): Do target
1879 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
1880 (debug_to_mourn_inferior, debug_to_close): Delete.
1881 (setup_target_debug): Adjust.
1883 2009-02-05 Pedro Alves <pedro@codesourcery.com>
1885 * target.h (target_stopped_data_address_p): Delete declaration,
1886 and don't define as macro.
1887 * target.c (target_stopped_data_address_p): Delete.
1889 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
1890 Tom Tromey <tromey@redhat.com>
1892 * python/python-utils.c (target_string_to_unicode): New function.
1893 * python/python-internal.h (target_string_to_unicode): New prototype.
1894 * python/python-value.c (valpy_string): New function.
1895 (value_object_methods): Add `string' entry.
1897 2009-02-05 Pedro Alves <pedro@codesourcery.com>
1899 * target.h (target_tid_to_str): Delete.
1900 * thread.c (print_thread_info, thread_apply_all_command)
1901 (thread_apply_command, thread_command, do_captured_thread_select):
1902 Use target_pid_to_str instead of target_tid_to_str.
1903 * linux-fork.c (delete_fork_command): Likewise.
1905 2009-02-05 Pedro Alves <pedro@codesourcery.com>
1907 * frame.c (has_stack_frames): Make public.
1908 (get_prev_frame): Don't allow a NULL this_frame anymore.
1909 * frame.h (has_stack_frames): Declare.
1910 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
1911 to get_prev_frame, instead start at get_current_frame.
1912 (varobj_create): Check has_stack_frames before getting any frame;
1913 eliminate one usage of deprecated_safe_get_selected_frame.
1915 2009-02-05 Tom Tromey <tromey@redhat.com>
1916 Thiago Jung Bauermann <bauerman@br.ibm.com>
1918 * python/python.c (GdbMethods): Move to bottom of file.
1919 (get_parameter, execute_gdb_command, gdbpy_write,
1920 gdbpy_flush): Remove forward declarations.
1921 (eval_python_from_control_command): Fix error checking of function
1922 PyRun_SimpleString. Fix error string.
1923 (python_command): Likewise.
1924 (execute_gdb_command): Added from_tty argument.
1926 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
1928 * language.h (language_dfn): Add la_get_string member.
1929 (LA_GET_STRING): New macro.
1930 (default_get_string): New prototype.
1931 * language.c (default_get_string): New function.
1932 (unknown_language_defn, auto_language_defn, local_language_defn): Use
1933 default_get_string for la_get_string.
1934 * c-lang.c (c_get_string): New function.
1935 (c_language_defn, cplus_language_defn, asm_language_defn): Use
1936 c_get_string for la_get_string.
1937 (minimal_language_defn): Likewise
1938 * ada-lang.c (ada_language_defn): Likewise.
1939 * f-lang.c (f_language_defn): Use default_get_string for
1941 * jv-lang.c (java_language_defn): Likewise.
1942 * m2-lang.c (m2_language_defn): Likewise.
1943 * objc-lang.c (objc_language_defn): Likewise.
1944 * p-lang.c (p_language_defn): Likewise.
1945 * scm-lang.c (scm_language_defn): Likewise.
1946 * typeprint.c (type_to_string): New function.
1947 * value.h (type_to_string): New prototype.
1948 * valprint.c (val_print_string): Factor out code for reading string
1949 from the inferior into its own function. Put 2 spaces after period
1951 (read_string): New function.
1952 * valprint.h (read_string): New prototype.
1954 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
1955 Tom Tromey <tromey@redhat.com>
1957 PR breakpoints/8079:
1958 * breakpoint.c (print_one_breakpoint): Use exp_string field
1959 to display expression of watchpoints.
1960 (mention): Likewise.
1961 (watch_command_1): Remove trailing whitespace from expression.
1962 * printcmd.c (struct display) <exp_string>: New field.
1963 (display_command): Set exp_string.
1964 (free_display): Free exp_string.
1965 (clear_displays): Use free_display.
1966 (do_one_display): Print exp_string.
1967 (display_info): Likewise.
1969 2009-02-04 Tom Tromey <tromey@redhat.com>
1970 Thiago Jung Bauermann <bauerman@br.ibm.com>
1971 Phil Muldoon <pmuldoon@redhat.com>
1973 * python/python-internal.h (gdbpy_get_value_from_history): Rename
1974 prototype to gdbpy_history.
1975 (gdbpy_is_string): Declare.
1976 (python_string_to_host_string): Declare.
1977 * python/python-utils.c (gdbpy_is_string): New function.
1978 (unicode_to_encoded_string): New function.
1979 (unicode_to_target_string): Use it.
1980 (python_string_to_host_string): New function.
1981 * python/python-value.c (valpy_address): New function.
1982 (convert_value_from_python): Use gdbpy_is_string. Change to throw
1983 Python exception instead of a GDB exception on error. Properly check
1985 (valpy_getitem): Convert field name to host string. Handle array
1986 accesses. Adapt to new behaviour of convert_value_from_python.
1987 (valpy_new): Adapt to new behaviour of convert_value_from_python.
1988 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
1989 VALPY_BITXOR, VALPY_BITOR>: New constants.
1990 (valpy_binop): Update. Adapt to new behaviour of
1991 convert_value_from_python.
1992 (valpy_invert): New function.
1993 (valpy_lsh): Likewise.
1994 (valpy_rsh): Likewise.
1995 (valpy_and): Likewise.
1996 (valpy_or): Likewise.
1997 (valpy_xor): Likewise.
1998 (valpy_richcompare): Call convert_value_from_python instead of doing
2000 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
2001 (gdbpy_get_value_from_history): Rename
2002 function to gdbpy_history.
2003 (gdbpy_initialize_values): Don't set tp_new.
2004 (value_object_type): Add valpy_new.
2005 (value_object_methods): Add `address' entry.
2006 (value_object_as_number): Update for new methods.
2007 * python/python.c (GdbMethods): Rename entry from
2008 `get_value_from_history' to `history'.
2010 2009-02-04 Jerome Guitton <guitton@adacore.com>
2012 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
2013 of type to guard against a crash.
2015 2009-02-04 Jerome Guitton <guitton@adacore.com>
2017 * value.c (value_from_contents_and_address): Always return
2018 a lval_memory value, even if address is null.
2020 2009-02-04 Tristan Gingold <gingold@adacore.com>
2022 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
2023 (amd64_darwin_sigcontext_addr): Ditto.
2024 (darwin_dwarf_signal_frame_p): Ditto.
2025 (i386_darwin_init_abi): Handle signal frames, use the const for
2027 (x86_darwin_init_abi_64): Ditto.
2029 2009-02-04 Tristan Gingold <gingold@adacore.com>
2031 * i386-tdep.c (i386_sigtramp_p): Make it public.
2032 * i386-tdep.h (i386_sigtramp_p): Declare.
2034 2009-02-04 Tristan Gingold <gingold@adacore.com>
2036 * machoread.c (macho_symfile_read): Read minsymtab also from
2038 (macho_symfile_read): Try to read dwarf2 frame info from main
2039 object file, but not from OSO files.
2040 (macho_symfile_offsets): Update section names for latest BFD
2042 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
2043 (x86_darwin_init_abi_64): Ditto.
2044 * solib-darwin.c: New file.
2045 * solib-darwin.h: New file.
2046 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
2048 2009-02-04 Tristan Gingold <gingold@adacore.com>
2050 * solist.h (struct target_so_ops): Comment fallback behavior for
2053 2009-02-03 Tom Tromey <tromey@redhat.com>
2055 * completer.c (add_struct_fields): Check type_name against NULL
2058 2009-02-03 Joel Brobecker <brobecker@adacore.com>
2060 * MAINTAINERS: Update Elena's email address.
2062 2009-02-02 Joel Brobecker <brobecker@adacore.com>
2064 * breakpoint (update_watchpoint): Minor comment adjustment.
2066 2009-02-02 Tom Tromey <tromey@redhat.com>
2069 * completer.c (count_struct_fields): Count method names.
2070 (add_struct_fields): Add matching method names.
2072 2009-02-02 Doug Evans <dje@google.com>
2074 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
2075 doing any further tcl/tk configury. Don't configure gdbtk if
2076 tcl or tk check fails.
2077 * aclocal.m4: Regenerate.
2078 * configure: Regenerate.
2080 2009-02-02 Tom Tromey <tromey@redhat.com>
2083 * valops.c (find_overload_match): Follow typedefs before taking
2084 address of object argument.
2086 2009-02-01 Doug Evans <dje@google.com>
2088 * target.h (target_waitstatus_to_string): Declare.
2089 * target.c (target_waitstatus_to_string): New function. Copied from
2090 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
2091 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
2092 TARGET_WAITKIND_NO_HISTORY.
2093 (debug_to_wait): Call it.
2094 * infrun.c (wait_for_inferior): If debug_infrun, print result of
2096 (fetch_inferior_event): Ditto.
2098 2009-01-30 Tom Tromey <tromey@redhat.com>
2100 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
2102 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
2105 * thread.c (do_captured_list_thread_ids): Report the current
2108 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
2110 * breakpoint.c (create_breakpoint, create_breakpoints)
2111 (break_command_really, set_breakpoint): New parameter enabled.
2112 (create_breakpoint, break_command_really): Make breakpoint
2113 disabled if so requested.
2114 * breakpoint.h (set_breakpoint): New parameter enabled.
2115 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
2117 2009-01-28 Doug Evans <dje@google.com>
2119 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
2120 (amd64_displaced_step_fixup): Declare.
2121 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
2122 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
2123 and make static global.
2124 (amd64_arch_regmap_len): New static global.
2125 (amd64_arch_reg_to_regnum): New function.
2126 (struct amd64_insn): New struct.
2127 (struct displaced_step_closure): New struct.
2128 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
2129 (rex_prefix_p,skip_prefixes)
2130 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
2131 (amd64_insn_length,amd64_get_unused_input_int_reg)
2132 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
2133 (amd64_displaced_step_copy_insn)
2134 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
2135 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
2136 (amd64_displaced_step_fixup): New functions.
2137 * amd64-linux-tdep.c: #include arch-utils.h.
2138 (amd64_linux_init_abi): Install displaced stepping support.
2140 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
2141 Jerome Guitton <guitton@adacore.com>
2143 * configure, config.in: Regenerated.
2144 * configure.ac: Add --with-system-gdbinit.
2145 * main.c (get_init_files): New.
2146 (captured_main): Use get_init_files. Load system gdbinit before
2148 (print_gdb_help): Print location of init files.
2150 2009-01-28 Pedro Alves <pedro@codesourcery.com>
2152 * corefile.c (generic_search): Delete disabled code.
2153 * gdbcore.h (generic_search): Delete declaration.
2155 2009-01-26 Pedro Alves <pedro@codesourcery.com>
2157 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
2158 parent to the child.
2159 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
2160 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
2161 remove_breakpoints to remove breakpoints from the parent.
2163 2009-01-26 Pedro Alves <pedro@codesourcery.com>
2165 PR backtrace/9458, PR backtrace/8864:
2166 * frame.c (create_new_frame): Update the frame's cached PC before
2167 finding its unwinder. Use frame_id_build to build the new frame's
2169 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
2170 array values from the ``args'' array values.
2172 2009-01-26 Pedro Alves <pedro@codesourcery.com>
2174 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
2175 (create_array_type, create_set_type, init_flags_type)
2176 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
2177 with a call to XZALLOC or XCALLOC, and pairs of calls to
2178 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
2180 2009-01-26 Pedro Alves <pedro@codesourcery.com>
2182 Add "maint set|show internal-error|internal-warning quit|corefile
2183 ask|yes|no" commands.
2186 * utils.c (internal_problem_ask, internal_problem_yes)
2187 (internal_problem_no, internal_problem_modes): New.
2188 (struct internal_problem): Remove FIXME. Make should_quit and
2189 should_dump_core types to char *.
2190 (internal_vproblem, internal_error_problem)
2191 (internal_warning_problem): Adjust.
2192 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
2194 (add_internal_problem_command): New.
2195 (_initialize_utils): New.
2197 2009-01-25 Pedro Alves <pedro@codesourcery.com>
2199 * infcmd.c (program_info): Use paddress instead of casting stop_pc
2202 2009-01-24 Pedro Alves <pedro@codesourcery.com>
2204 * infrun.c (normal_stop): Don't call
2205 deprecated_update_frame_pc_hack.
2206 * frame.c (deprecated_update_frame_pc_hack)
2207 (deprecated_update_frame_base_hack): Delete, and ...
2208 (create_new_frame): ... inline here.
2209 * frame.h (deprecated_update_frame_pc_hack)
2210 (deprecated_update_frame_base_hack): Delete declarations.
2212 2009-01-23 Pedro Alves <pedro@codesourcery.com>
2214 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
2215 * cli/cli-setshow.c (do_setshow_command): Handle it.
2216 * command.h (enum var_types): Add var_zuinteger.
2217 (add_setshow_zuinteger_cmd): Declare.
2219 * valprint.c (_initialize_valprint): Change the set input-radix
2220 and set output-radix commands to zuinteger type.
2222 2009-01-23 Pedro Alves <pedro@codesourcery.com>
2225 * infrun.c (normal_stop): Tag threads as stopped, and run the
2226 hook-stop before printing the stack frame.
2228 2009-01-22 Pedro Alves <pedro@codesourcery.com>
2231 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
2234 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
2236 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
2239 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
2242 * infcmd.c (signal_command): Do not specify a resume PC.
2244 2009-01-19 Doug Evans <dje@google.com>
2246 * dummy-frame.c (dummy_frame): Replace regcache member with
2248 (dummy_frame_push): Replace caller_regcache arg with caller_state.
2249 All callers updated.
2250 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
2251 (dummy_frame_pop): Rewrite. Verify requested frame is in the
2252 dummy frame stack. Restore program state.
2253 (cleanup_dummy_frames): Rewrite.
2254 (dummy_frame_sniffer): Update. Make static.
2255 * dummy-frame.h (regcache,frame_info): Delete forward decls.
2256 (inferior_thread_state): New forward decl.
2257 (dummy_frame_push): Update prototype.
2258 * frame.c (frame_pop): dummy_frame_pop now does all the work for
2260 * infcall.c (breakpoint_auto_delete_contents): Delete.
2261 (get_function_name,run_inferior_call): New fns.
2262 (call_function_by_hand): Simplify by moving some code to
2263 get_function_name, run_inferior_call. Inferior function call wrapped
2264 in TRY_CATCH so there's less need for cleanups and all exits from
2265 proceed are handled similarily. Detect program exit.
2266 Detect program stopping in a different thread.
2267 Make error messages more consistent.
2268 * inferior.h (inferior_thread_state): Declare (opaque type).
2269 (save_inferior_thread_state,restore_inferior_thread_state,
2270 make_cleanup_restore_inferior_thread_state,
2271 discard_inferior_thread_state, get_inferior_thread_state_regcache):
2273 (save_inferior_status): Update prototype.
2274 * infrun.c: (normal_stop): When stopped for the completion of an
2275 inferior function call, verify the expected stack frame kind.
2276 (inferior_thread_state): New struct.
2277 (save_inferior_thread_state,restore_inferior_thread_state,
2278 do_restore_inferior_thread_state_cleanup,
2279 make_cleanup_restore_inferior_thread_state,
2280 discard_inferior_thread_state,
2281 get_inferior_thread_state_regcache): New functions.
2282 (inferior_status): Move stop_signal, stop_pc, registers to
2283 inferior_thread_state. Remove restore_stack_info.
2284 (save_inferior_status): Remove arg restore_stack_info.
2285 All callers updated. Remove saving of state now saved by
2286 save_inferior_thread_state.
2287 (restore_inferior_status): Remove restoration of state now done by
2288 restore_inferior_thread_state.
2289 (discard_inferior_status): Remove freeing of registers, now done by
2290 discard_inferior_thread_state.
2292 2009-01-18 Pedro Alves <pedro@codesourcery.com>
2294 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
2295 at a time, times NUM_TO_SCROLL.
2296 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
2297 fetch the selected frame if there is no stack.
2299 2009-01-18 Pedro Alves <pedro@codesourcery.com>
2302 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
2304 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
2305 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
2306 is thrown while handling an event, finish the thread state.
2307 (normal_stop): Use finish_thread_state cleanup.
2308 * infcmd.c (run_command_1): If an error is thrown while starting
2309 the inferior, finish the thread state.
2311 2009-01-18 Pedro Alves <pedro@codesourcery.com>
2313 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
2314 skip breakpoints without a location (pending breakpoints).
2316 2009-01-18 Pedro Alves <pedro@codesourcery.com>
2319 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
2321 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
2323 * thread.c (thread_command): Move call to annotate_thread_changed
2325 (do_captured_thread_select): ... here, to avoid printing an
2326 annotation if the thread change generates an exception.
2328 2009-01-16 Joel Brobecker <brobecker@adacore.com>
2330 * NEWS: Document x86_64/MinGW as a new native configuration.
2332 2009-01-16 Joel Brobecker <brobecker@adacore.com>
2334 * NEWS: Move the documentation of "info os processes" to
2335 the appropriate section (documenting the new commands).
2337 2009-01-15 Doug Evans <dje@google.com>
2339 * target.h (target_signal_to_string): Make return type const char *.
2340 (target_signal_to_name): Ditto.
2341 (target_signal_from_name): Make arg const char *.
2342 * infrun.c (sig_print_info): Update.
2343 * signals/signals.c (signals): Make array and struct members const.
2344 (target_signal_to_string): Make return type const char *.
2345 (target_signal_to_name): Ditto.
2346 (target_signal_from_name): Make arg const char *.
2348 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
2349 Tristan Gingold <gingold@adacore.com>
2351 * solist.h (struct target_so_ops): New member bfd_open.
2352 (solib_find): Add prototype.
2353 (solib_bfd_fopen): Add prototype.
2354 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
2355 from solib_bfd_open.
2356 (solib_bfd_open): Use ops->bfd_open override if present. Call
2357 solib_find and solib_bfd_open otherwise.
2359 * objfiles.h (OBJF_KEEPBFD): New define.
2360 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
2361 objfile flag is set.
2362 * solib.c (symbol_add_stub): Do not allocate second BFD for
2363 shared library; use OBJF_KEEPBFD flag on solib objfile.
2365 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
2367 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
2369 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
2371 * value.h (address_of_variable): Add prototype.
2372 (locate_var_value): Remove prototype.
2374 * findvar.c (read_var_value): Do not attempt to default frame
2376 (locate_var_value): Remove function.
2377 * valops.c (value_of_variable): Retrieve selected frame for
2378 symbols that require a frame when called with NULL block.
2379 * valops.c (address_of_variable): New function.
2381 * eval.c (evaluate_subexp_for_address): Call address_of_variable
2382 instead of calling locate_var_value.
2383 (evaluate_subexp_with_coercion): Likewise.
2385 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
2387 * NEWS: Document "define" for prefixed commands.
2388 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
2389 show_user_1 for prefix commands.
2390 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
2391 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
2392 commands. Return the containing command list.
2393 (define_command, document_command): Update to handle prefix commands.
2394 (show_user_1): Add prefix and name arguments. Handle prefix
2396 * cli/cli-script.h (show_user_1): Update prototype.
2398 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
2400 * mingw-ser.c (console_select_thread): Add return to make
2402 (pipe_select_thread): Likewise.
2403 (file_select_thread): Likewise.
2405 2009-01-14 Pedro Alves <pedro@codesourcery.com>
2407 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
2410 2009-01-14 Pedro Alves <pedro@codesourcery.com>
2412 * remote.c (extended_remote_mourn_1): Invalidate our notion of
2413 current general thread.
2415 2009-01-14 Pedro Alves <pedro@codesourcery.com>
2417 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
2418 without a live selected thread.
2420 2009-01-14 Joel Brobecker <brobecker@adacore.com>
2422 Update the copyright notice of some of the files I missed
2423 in the previous copyright update.
2425 2009-01-14 Joel Brobecker <brobecker@adacore.com>
2427 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
2428 base address instead of casting it to DWORD.
2430 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
2432 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
2433 for NULL frame pointers.
2435 2009-01-13 Mark Kettenis <kettenis@gnu.org>
2437 * utils.c (host_address_to_string): Reimplement in a way that
2438 avoids the cast of the address to long.
2440 2009-01-13 Joel Brobecker <brobecker@adacore.com>
2442 * mdebugread.c (parse_symbol): Save the symbol private data
2443 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
2444 (psymtab_to_symtab_1): Likewise.
2445 (parse_procedure): Declare variable "e" only in the scope
2446 where it is used. Extract the symbol private data using
2449 2009-01-13 Jim Blandy <jimb@codesourcery.com>
2451 Abstract out common code for copying value locations.
2453 * value.h (set_value_component_location): New declaration.
2454 * value.c (set_value_component_location): New function.
2455 (value_primitive_field): Use it.
2456 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
2457 * valops.c (search_struct_field, value_slice): Same.
2458 * ada-lang.c (coerce_unspec_val_to_type)
2459 (ada_value_primitive_packed_val): Same.
2461 2009-01-13 Joel Brobecker <brobecker@adacore.com>
2463 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
2465 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
2467 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
2469 * i386-cygwin-tdep.c: Ditto.
2470 * i386-windows-nat.c: Ditto.
2471 * windows-nat.h: Ditto.
2472 * windows-tdep.c: Ditto.
2473 * windows-tdep.h: Ditto.
2474 * windows-nat.c: Ditto.
2475 (cygwin_load_start): Redefine as CORE_ADDR.
2476 (cygwin_load_end): Ditto.
2477 (windows_make_so): Coerce result of address arithmetic to uintptr_t
2478 before coercing to CORE_ADDR to avoid a compiler warning.
2479 (handle_exception): Define addr as CORE_ADDR and coerce
2480 ExceptionAddress to uintptr_t before assigining to avoid a compiler
2482 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
2485 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2487 Fix linking with --enable-targets=all:
2488 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
2489 (HFILES_NO_SRCDIR): Add windows-tdep.h.
2490 (ALLDEPFILES): Add windows-tdep.c.
2492 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
2494 * win32-nat.h: Delete.
2495 * windows-nat.h: Rename from win32-nat.h.
2496 * win32-nat.c: Delete.
2497 * windows-nat.c: Rename from win32-nat.c.
2498 * win32-termcap.c: Delete.
2499 * windows-termcap.c: Rename from win32-termcap.c.
2500 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
2501 * configure.ac: Handle rename from win32-termcap.c ->
2503 * configure: Regenerate.
2504 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
2505 -> windows-termcap.c.
2506 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
2508 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
2509 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
2511 (win32_make_so): Handle cygwin compiler warning due to change of
2512 load_addr from DWORD to LPVOID.
2513 (handle_load_dll): Use %p in format string to properly print address
2514 and avoid a compiler warning.
2515 (DEBUG_EXCEPTION_SIMPLE): Ditto.
2516 (handle_exception): Ditto.
2517 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
2518 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
2520 * config/i386/mingw.mh: Ditto.
2521 * config/i386/mingw64.mh: Ditto.
2523 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2525 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
2526 arrayprint_recurse_level to a parameter. Update all the callers. New
2527 comment at autovariables.
2529 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2531 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
2534 2009-01-11 Joel Brobecker <brobecker@adacore.com>
2536 * target.c (target_xfer_partial): Use host_address_to_string to
2537 print the address of readbuf and writebuf. Cast the address of
2538 elements inside the myaddr buffer into intptr_t.
2539 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
2540 Cast the address of elements inside the myaddr buffer into
2543 2009-01-11 Joel Brobecker <brobecker@adacore.com>
2545 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
2546 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
2547 * configure.host, configure.tgt: Add handling for x86_64/windows.
2548 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
2549 and amd64-windows-tdep.c.
2551 2009-01-11 Joel Brobecker <brobecker@adacore.com>
2553 * win32-tdep.h, win32-tdep.c: New files.
2554 * i386-cygwin-tdep.h: Delete.
2555 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
2557 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
2558 * win32-nat.c: Likewise.
2559 * configure.tgt: Add win32-tdep.o to the list of target object
2560 files for i386-cygwin and i386-mingw targets.
2562 2009-01-11 Joel Brobecker <brobecker@adacore.com>
2564 * win32-nat.h: New file.
2565 * win32-nat.c (mappings): Initialize to NULL.
2566 (win32_set_context_register_offsets): New function.
2567 * i386-windows-nat.c: New file.
2568 (mappings): Moved here from win32-nat.c.
2569 (_initialize_i386_windows_nat): New function.
2570 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
2571 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
2573 2009-01-09 Andreas Schwab <schwab@suse.de>
2575 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
2577 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
2579 * gdbtypes.c (append_composite_type_field): Correct the location of
2582 2009-01-09 Pedro Alves <pedro@codesourcery.com>
2584 * defs.h (deprecated_error_hook): Delete declaration.
2585 * interps.c (clear_interpreter_hooks): Adjust.
2586 * remote-sim.c (gdb_os_error): Don't try to call
2587 deprecated_error_hook. No need to call exit anymore.
2588 * top.c (deprecated_error_hook): Delete.
2590 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2592 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
2593 to print the address of the gdbarch pointer.
2595 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2597 * gdbarch.sh: Fix all the compilation errors on amd64-windows
2598 due to casting a pointer to a long when printing a function
2599 address. Instead, use host_address_to_string to convert our
2600 address to a string.
2601 * gdbarch.c: Regenerate.
2603 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2605 * event-top.c (async_disconnect, async_stop_sig): use "raise"
2606 instead of "kill" to raise a signal.
2608 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2610 * win32-nat.c (get_module_name): Change the type of parameter
2611 "base_address" to LPVOID. Remove unnecessary cast.
2612 (struct lm_info): Change type of load_addr to LPVOID.
2613 (win32_make_so): Change the type of parameter "load_addr"
2614 to LPVOID. Remove some unnecessary casts.
2615 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
2616 (win32_xfer_shared_libraries): Add missing cast.
2618 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2620 * win32-nat.c (has_detach_ability, set_process_privilege):
2621 Cast the result of GetProcAddress to (void *) to avoid
2622 a compilation warning.
2624 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2626 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
2629 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2631 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
2632 definition of local variable "done".
2633 (info_w32_command, handle_exception): Remove unnecessary cast.
2635 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2637 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
2638 DebugSetProcessKillOnExit. Update all uses in this file.
2639 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
2640 Update all uses in this file.
2642 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2644 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
2645 and use it when pushing the target.
2646 (win32_attach, win32_create_inferior): Update call to
2647 do_initial_win32_stuff.
2648 (win32_detach, win32_mourn_inferior): Use our ops parameter
2649 instead of the global win32_ops to unpush the target.
2651 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2653 * ser-mingw.c (ser_windows_open): Use proper type when casting
2654 in call to _open_osfhandle.
2656 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
2658 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
2660 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2662 * CONTRIBUTE: Minor reformatting.
2664 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
2666 * MAINTAINERS: Add myself to Write After Approval.
2667 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
2670 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
2672 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
2673 Call exit to make it obvious to GCC.
2675 2009-01-08 Tom Tromey <tromey@redhat.com>
2677 PR breakpoints/9350:
2678 * varobj.c (varobj_invalidate): Unconditionally free
2680 * symfile.c (syms_from_objfile): Free local_addr when returning
2682 * exec.c (exec_file_attach): Do cleanups before returning.
2683 (exec_file_command): Likewise.
2684 * corefile.c (reopen_exec_file): Do cleanups before returning.
2685 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
2687 (do_vec_free): New function.
2688 (update_global_location_list): Make a cleanup for old_locations.
2689 Do cleanups before returning. Remove unused variable 'e'.
2690 (find_condition_and_thread): Free result of parsing the
2692 (print_it_typical): Do cleanups before returning.
2693 (breakpoint_re_set_one): Always free sals.sals.
2695 2009-01-08 Joel Brobecker <brobecker@adacore.com>
2696 Emi Suzuki <emi-suzuki@tjsys.co.jp>
2698 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
2701 2009-01-07 Doug Evans <dje@google.com>
2703 * top.c (gdb_prompt_string): Delete, unused.
2705 2009-01-07 Pedro Alves <pedro@codesourcery.com>
2707 Delete ONE_PROCESS_WRITETEXT leftovers.
2709 * breakpoint.c (insert_bp_location): Delete process_warning
2711 (insert_breakpoint_locations): Adjust.
2712 (reattach_breakpoints): Adjust.
2713 * infrun.c (normal_stop): Drop "It might be running in another
2716 2009-01-07 Stan Shebs <stan@codesourcery.com>
2718 * config/pa/linux.mh (XDEPFILES): Remove.
2720 2009-01-07 Doug Evans <dje@google.com>
2722 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
2724 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
2726 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
2727 spacing, a regression from 2008-04-22.
2729 2009-01-07 Joel Brobecker <brobecker@adacore.com>
2731 * utils.c (gdb_print_host_address): Adjust implementation to
2732 reuse host_address_to_string. Move comment explaining the conversion
2733 from host address to string from here...
2734 (host_address_to_string): ... to there.
2736 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
2738 * MAINTAINERS: Add myself for write after approval privileges.
2740 2009-01-06 Tom Tromey <tromey@redhat.com>
2742 * value.c (set_internalvar): Use value_free, not xfree.
2744 2009-01-06 Jim Blandy <jimb@red-bean.com>
2746 Check return values of functions declared with warn_unused_result
2747 attribute in GLIBC 2.8.
2748 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
2749 * inflow.c (check_syscall): New function.
2750 (new_tty): Use check_syscall to check return values from open and dup.
2751 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
2752 * main.c (captured_main): Call cwd after setting up gdb_stderr;
2753 check for errors from getcwd.
2754 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
2755 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
2756 (stdio_file_fputs): Same.
2757 * utils.c (internal_vproblem): abort if last-ditch error message
2760 * top.c (gdb_init): Don't set the current directory here; that's
2761 already been done in captured_main.
2763 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
2765 * ser-tcp.c: Adjust includes.
2766 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
2767 (tcp_auto_retry, tcp_retry_limit): Declare.
2768 (TIMEOUT): Remove, in favor of tcp_retry_limit.
2769 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
2770 (wait_for_connect): New function.
2771 (net_open): Use it. Add auto-retry logic.
2772 (set_tcp_cmd, show_tcp_cmd): New functions.
2773 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
2774 and "set/show tcp connect-timeout" commands.
2775 * NEWS: Document new commands.
2777 2009-01-05 Tom Tromey <tromey@redhat.com>
2779 * python/python-internal.h (Py_ssize_t): Define as int.
2781 2009-01-05 Jim Blandy <jimb@red-bean.com>
2783 * MAINTAINERS: Fix my e-mail address as steering committee member.
2785 2009-01-03 Joel Brobecker <brobecker@adacore.com>
2787 Updated copyright notices for most files.
2789 2009-01-03 Joel Brobecker <brobecker@adacore.com>
2791 * top.c (print_gdb_version): Update copyright year.
2793 2009-01-03 Joel Brobecker <brobecker@adacore.com>
2795 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
2797 2009-01-01 Pedro Alves <pedro@codesourcery.com>
2799 PR breakpoints/9681:
2800 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
2801 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
2802 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
2803 retrow all other exceptions.
2805 For older changes see ChangeLog-2008.
2811 version-control: never
projects / external / binutils.git / blob