2000-04-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
[external/binutils.git] / gdb / ChangeLog
1 2000-04-17  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
2
3         symfile.c: (symbol_file_command): Remove support for rombug, to
4         simplify code.
5
6 2000-04-17  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
7
8         * symfile.c (add_symbol_file_command): Rewrite the arguments
9         processing part. Simplify syntax of command. Remove support for
10         rombug.
11         (_initialize_symfile): Update help message for add-symbol-file
12         command.
13
14 Mon Apr 17 15:53:38 2000  Andrew Cagney  <cagney@b1.cygnus.com>
15
16         * gdbarch.sh (IEEE_FLOAT): Only dump when defined.
17         * gdbarch.h, gdbarch.c: Re-generate.
18
19 Mon Apr 17 11:26:01 2000  Andrew Cagney  <cagney@b1.cygnus.com>
20
21         * remote.c (REMOTE_TRANSLATE_XFER_ADDRESS), mem-break.c
22         (MEMORY_INSERT_BREAKPOINT, MEMORY_REMOVE_BREAKPOINT), target.h
23         (BREAKPOINT_FROM_PC), valops.c (COERCE_FLOAT_TO_DOUBLE),
24         gdbarch.sh (D10V_MAKE_DADDR, D10V_MAKE_IADDR,
25         FRAMELESS_FUNCTION_INVOCATION, REGISTER_CONVERTIBLE,
26         REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW,
27         REGISTER_NAME), findvar.c (POINTER_TO_ADDRESS,
28         ADDRESS_TO_POINTER): Delete default definition.  Handled by
29         gdbarch.
30
31         * gdbarch.sh: Make multi-arch defaults, defaults for non-
32         multi-arch targets.
33         (REGISTER_NAME, COERCE_FLOAT_TO_DOUBLE, REGISTER_CONVERTIBLE,
34         REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW,
35         D10V_MAKE_DADDR, D10V_MAKE_IADDR, BREAKPOINT_FROM_PC,
36         MEMORY_INSERT_BREAKPOINT, MEMORY_REMOVE_BREAKPOINT,
37         REMOTE_TRANSLATE_XFER_ADDRESS, FRAMELESS_FUNCTION_INVOCATION):
38         Provide default/legacy implementation.
39         (REGISTER_NAMES, CALL_DUMMY): Allow legacy definition.
40         * gdbarch.h, gdbarch.c: Re-generate.
41
42 2000-04-16  Jim Blandy  <jimb@redhat.com>
43
44         * findvar.c (store_typed_address, extract_typed_address): Fix
45         function names in error messages.
46
47 2000-04-16  Eli Zaretskii  <eliz@is.elta.co.il>
48
49         * config/djgpp/config.sed: Fix the lines which edit clean: and
50         uninstall-info: targets.
51
52 2000-04-14  Jim Blandy  <jimb@redhat.com>
53
54         Provide the hooks needed to support architectures on which
55         pointers are not always simple byte addresses.
56
57         * gdbarch.sh (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Two new
58         functions which architectures can redefine, defaulting to
59         generic_pointer_to_address and generic_address_to_pointer.
60         * findvar.c (extract_typed_address, store_typed_address,
61         generic_pointer_to_address, generic_address_to_pointer): New
62         functions.
63         (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Provide default
64         definitions.
65         (extract_address, store_address): Doc fixes.
66         * values.c (value_as_pointer): Doc fix.
67         (value_from_pointer): New function.
68         * defs.h (extract_typed_address, store_typed_address): New
69         declarations.
70         * inferior.h (generic_address_to_pointer,
71         generic_pointer_to_address): New declarations.
72         * value.h (value_from_pointer): New declaration.
73         
74         The following changes are all of the general form "Use these
75         functions instead of these other functions."  In each case, the
76         change is because the new calls provide enough information to do
77         the appropriate address / pointer conversions, where the old calls
78         did not, or because the new functions are more appropriately named
79         for the operation being performed.
80         
81         * ax-gdb.c (const_var_ref): Use value_from_pointer, not
82         value_from_longest.
83         * blockframe.c (generic_push_dummy_frame): Use read_pc and
84         read_sp, not read_register.
85         * c-valprint.c (c_val_print): Use extract_typed_address instead of
86         extract_address to extract vtable entries and references.
87         * cp-valprint.c (cp_print_value_fields): Use value_from_pointer
88         instead of value_from_longest to extract the vtable's address.
89         * eval.c (evaluate_subexp_standard): Use value_from_pointer
90         instead of value_from_longest to compute `this', and for doing
91         pointer-to-member dereferencing.
92         * findvar.c (read_register): Use extract_unsigned_integer, not
93         extract_address.
94         (read_var_value): Use store_typed_address instead of store_address
95         for building label values.
96         (locate_var_value): Use value_from_pointer instead of
97         value_from_longest.
98         * hppa-tdep.c (find_stub_with_shl_get): Use value_from_pointer,
99         instead of value_from_longest, to build arguments to __d_shl_get.
100         * printcmd.c (set_next_address): Use value_from_pointer, not
101         value_from_longest.
102         (x_command): Use value_from_pointer, not value_from_longest.
103         * tracepoint.c (set_traceframe_context): Use value_from_pointer,
104         not value_from_longest.
105         * valarith.c (value_add, value_sub): Use value_from_pointer, not
106         value_from_longest.
107         * valops.c (find_function_in_inferior, value_coerce_array,
108         value_coerce_function, value_addr, hand_function_call): Same.
109         * value.h (COERCE_REF): Use unpack_pointer, not unpack_long. 
110         * values.c (unpack_long): Use extract_typed_address to produce
111         addresses from pointers and references, not extract_address.
112         (value_from_longest): Use store_typed_address instead of
113         store_address to produce pointer and reference values.
114
115 2000-04-13  Mark Kettenis  <kettenis@gnu.org>
116
117         * acconfig.h (HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T,
118         HAVE_PSADDR_T): Add them here instead of in config.in.
119
120         * acconfig.h (PRFPREGSET_T_BROKEN): New define.
121         * configure.in: Add check for broken prfpregset_t type.
122         * lin-thread.c (gdb_prfpregset): New typedef, depends on
123         definition of PRFPREGSET_T_BROKEN.
124         (ps_lgetfpregs, ps_lsetfpregs, p_td_thr_getfpregs,
125         p_td_thr_setfpregs, thread_db_fetch_registers,
126         thread_db_store_registers): Use gdb_prfpregset_t instead of
127         prfpregset_t.
128         * config.in: Regenerated.
129         * configure: Regenerated.
130
131 2000-04-13  DJ Delorie  <dj@cygnus.com>
132
133         * mips-tdep.c (do_fp_register_row): copy the number of bytes
134         allocated, not the size of the pointer.
135
136 2000-04-13  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
137
138         * config/i386/nm-i386sol2.h (CANNOT_STEP_HW_WATCHPOINTS):  Define.
139         * config/i386/tm-i386sol2.h (HAVE_I387_REGS):  Define.
140         * i386v4-nat.c (supply_fpregset, fill_fpregset):  Add code
141         to handle floating point registers if NUM_FREGS is not zero.
142
143 2000-04-13  Nick Duffek  <nsd@cygnus.com>
144
145         * sol-thread.c (init_sol_core_ops): Initialize to_thread_alive
146         and document to_find_new_threads bug.
147
148 2000-04-13  Eli Zaretskii  <eliz@is.elta.co.il>
149
150         * infrun.c (proceed, normal_stop): Change the error message about
151         failure to insert breakpoints/watchpoints so that it makes sense
152         even if ptrace is not used or no other processes can be active.
153
154 Thu Apr 13 13:24:27 2000  Andrew Cagney  <cagney@b1.cygnus.com>
155
156         * configure.in: Add --enable-maintainer-mode.
157         * aclocal.m4, configure: Re-generate.
158
159         * Makefile.in ($(srcdir)/copying.c): Enable dependencies only when
160         on maintainer-mode.  Update copying.c in source directory.
161         (copying.txt): Delete rule.
162         (copying.o): Add explict paths to $(srcdir) and explicit make
163         rule.
164
165 2000-04-12  Kevin Buettner  <kevinb@redhat.com>
166
167         * ia64-linux-nat.c (IA64_PSR_DB, IA64_PSR_DD): Define.
168         (fetch_debug_register, fetch_debug_register_pair,
169         store_debug_register, store_debug_register_pair, is_power_of_2,
170         enable_watchpoints_in_psr, ia64_linux_insert_watchpoint,
171         ia64_linux_remove_watchpoint, ia64_linux_stopped_by_watchpoint):
172         New functions.
173         * config/ia64/nm-linux.h (TARGET_HAS_HARDWARE_WATCHPOINTS,
174         TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_STEPPABLE_WATCHPOINT,
175         STOPPED_BY_WATCHPOINT, target_insert_watchpoint,
176         target_remove_watchpoint): Define.
177         (ia64_linux_stopped_by_watchpoint, ia64_linux_insert_watchpoint,
178         ia64_linux_remove_watchpoint): Declare.
179
180 2000-04-12  Eli Zaretskii  <eliz@is.elta.co.il>
181
182         * go32-nat.c (go32_insert_hw_breakpoint): When there are no more
183         hardware breakpoint resources, return EBUSY.
184         (go32_handle_nonaligned_watchpoint): If the argument WHAT is not
185         one of the enumerated values, return EINVAL.
186
187 2000-04-12  Eli Zaretskii  <eliz@is.elta.co.il>
188
189         * README: Mention special build instructions for DJGPP.
190         * NEWS: Update with FP features on x87 platforms, and
191         DJGPP-related changes.
192
193 2000-04-12  Eli Zaretskii  <eliz@is.elta.co.il>
194
195         * top.c (gdb_completer_file_name_break_characters): New variable.
196         (line_completion_function): When completing on file names, use
197         gdb_completer_file_name_break_characters as word break
198         characters for the readline library.
199
200 2000-04-12  Mark Kettenis  <kettenis@gnu.org>
201
202         * i387-tdep.c (print_i387_value): Avoid call to
203         floatformat_to_doublest if long double type is the same on host
204         and target.
205
206 2000-04-11  Fernando Nasser  <fnasser@cygnus.com>
207
208         * wrapper.h: Remove definitions of internal functions.
209         * wrapper.c: Remove definitions of exported functions (which are
210         already in wrapper.h) and make static all internal wrap_* functions.
211
212 Mon Apr 10 21:58:36 2000  Andrew Cagney  <cagney@b1.cygnus.com>
213
214         * acconfig.h (USE_INCLUDED_REGEX): Add.
215         * Makefile.in (REGEX_CFLAGS): Delete
216         * configure.in (REGEX_CFLAGS): Delete. Use AC_DEFINE instead.
217         * configure, config.in: Re-generate.
218
219 2000-04-10  Philip Blundell <philb@gnu.org>
220
221         * arm-linux-nat.c (arm_skip_solib_resolver): Remove and move to
222         arm-linux-tdep.c.
223         * arm-linux-tdep.c (arm_skip_solib_resolver): New.
224
225 2000-04-10  Fernando Nasser  <fnasser@cygnus.com>
226
227         From 2000-04-10 Rodney Brown <rdb@redhat.com>:
228         * command.h (enum command_class): Remove trailing "," to placate
229         AIX xlc.
230
231 Mon Apr 10 20:17:32 2000  Andrew Cagney  <cagney@b1.cygnus.com>
232
233         * TODO, NEWS: Update.  Mention MI.
234
235 Mon Apr 10 00:21:09 2000  Andrew Cagney  <cagney@b1.cygnus.com>
236
237         * gdbarch-utils.h, gdbarch-utils.c: Delete.
238         * arch-utils.h, arch-utils.c: New files.  Avoid 14 character file
239         name problems.
240         * Makefile.in: Update.
241         * gdbarch.c: Update.
242
243 Sun Apr  9 23:42:16 2000  Andrew Cagney  <cagney@b1.cygnus.com>
244
245         From 2000-04-07 Jonathan Larmour <jlarmour@redhat.co.uk>:
246         * mips-tdep.c (saved_gpreg_size_enums): Define enum command for
247         new "set mips saved-gpreg-size" command
248         (MIPS_SAVED_REGSIZE): Now a function mips_saved_regsize()
249         (MIPS_DEFAULT_SAVED_REGSIZE): Define for default MIPS_SAVED_REGSIZE,
250         either from target, or gdb multi-arch
251         (show_mips_command): New. For "show mips" prefix command
252         (set_mips_command): New. For "show mips" prefix command
253         (_initialize_mips_tdep): Add top-level mips prefix command
254         Add "set mips saved-gpreg-size" command
255
256         * mips-tdep.c (struct gdbarch_tdep): Rename mips_saved_regsize to
257         mips_default_saved_regsize.
258         (mips_gdbarch_init): Update.
259         (MIPS_DEFAULT_SAVED_REGSIZE): Update.
260         (mips_gdbarch_init): Use MIPS_REGSIZE as the default value for
261         mips_default_saved_regsize.
262
263 Sun Apr  9 23:27:00 2000  Andrew Cagney  <cagney@b1.cygnus.com>
264
265         From 2000-04-07 J.T. Conklin <jtc@redback.com>:
266         * lynx-nat.c (fetch_inferior_registers, store_inferior_registers):
267         replace calls to target_xfer_memory() with target_read_memory()
268         and target_write_memory().
269
270 Sun Apr  9 22:54:29 2000  Andrew Cagney  <cagney@b1.cygnus.com>
271
272         * valops.c (value_rtti_type): Compare VALUE_ADDRESS with ``0'' not
273         NULL. Macro returns a CORE_ADDR.
274
275 2000-04-08  Jim Blandy  <jimb@redhat.com>
276
277         * dwarf2read.c: Revert Andrew Cagney's change of Dec 15, 1997.
278         Don't include "bfd-elf.h".
279         (address_significant_size): Delete variable.
280         (dwarf2_build_psymtabs_hard): Don't set it, or check for
281         consistency between it and the Dwarf 2 compilation unit header
282         address size.
283         (read_address): Don't mask off bits above
284         address_significant_size.
285         * Makefile.in (dwarf2read.o): Don't depend on $(elf_bfd_h).
286         (elf_bfd_h): Remove variable; it's no longer used.
287
288 2000-04-08  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
289
290         * configure.in (NEW_PROC_API):  Escape square brackets when testing
291         for solaris2.[678].
292         * configure:  Regenerate.
293
294 2000-04-07  Scott Bambrough <scottb@netwinder.org>
295
296         * ChangeLog: Correct date on last entry.
297         * arm-linux-tdep.c (arm_linux_push_arguments): New function.
298         * config/arm/tm-linux: Redefined PUSH_ARGUMENTS for Linux.  
299         * config/arm/tm-embed: Fix build warning from redefinition of
300         LOWEST_PC.
301         * config/arm/tm-arm.h: Remove TARGET_BYTE_ORDER_SELECTABLE.
302         * config/arm/tm-wince.h: Remove TARGET_BYTE_ORDER_SELECTABLE and 
303         TARGET_BYTE_ORDER.  Add TARGET_BYTE_ORDER_SELECTABLE_P to 
304         override default in tm-arm.h.  Use default target byte order
305         from tm-arm.h.
306
307 2000-04-07  Scott Bambrough <scottb@netwinder.org>
308
309         * Makefile.in: Add dependency information for arm-linux-tdep.c.
310         * config/djgpp/fnchange.lst: Add arm-linux-tdep.c, arm-linux-nat.c.
311
312 2000-04-07  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
313
314         * sol-thread.c (gdb_ps_addr_t):  New typedef, depends on definition
315         of PROC_SERVICE_IS_OLD.
316         (ps_pglobal_lookup, ps_pdread, ps_pdwrite, ps_ptread, ps_ptwrite,
317         rw_common):  Change argument type from psaddr_t to gdb_ps_addr_t.
318
319 Fri Apr  7 17:18:42 2000  Andrew Cagney  <cagney@b1.cygnus.com>
320
321         * Makefile.in (CFLAGS): Set using configure.
322
323         * configure.in (WARN_CFLAGS): Enable by default when GCC.
324         * configure: Re-generate.
325
326 Fri Apr  7 13:33:43 2000  Andrew Cagney  <cagney@b1.cygnus.com>
327
328         From 2000-03-27 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
329         * procfs.c (init_procfs_ops):  Set procfs_ops.to_has_memory and
330         procfs_ops.to_has_all_memory to 1.
331
332         * TODO: Update
333
334 2000-04-06  Nick Duffek  <nsd@cygnus.com>
335
336         * configure.in (_MSE_INT_H): Define on Solaris 7.
337         (NEW_PROC_API): Define on Solaris 7 and 8 as well as 6.
338         * acconfig.h (_MSE_INT_H): Define on Solaris 7.
339         * configure: Regenerate.
340         * config.in: Regenerate.
341
342 2000-04-06  Michael Snyder  <msnyder@cygnus.com>
343
344         * sol-thread.c (GET_LWP, GET_THREAD, BUILD_LWP, BUILD_THREAD):
345         Change to rely on PIDGET etc.
346         * config/i386/nm-i386sol2.h (TARGET_HAS_WATCHPOINTS, 
347         TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT,
348         STOPPED_BY_WATCHPOINT, target_[insert/remove]_watchpoint):
349         define.  Allow target to use procfs hardware watchpoints.
350         * config/sparc/nm-sun4sol2.h: ditto.
351         * config/i386/tm-i386sol2.h (PIDGET, TIDGET, MERGEPID): modify
352         definitions to use 16 bits for the pid, 15 bits for the tid, and
353         1 bit for the flag.
354         * config/sparc/tm-sun4sol2.h: ditto.
355         (SOFTWARE_SINGLE_STEP, SOFTWARE_SINGLE_STEP_P): undefine.
356         * testsuite/gdb.threads/pthreads.exp (all_threads_running): Allow
357         for more than 15 thread increments.
358
359 2000-04-06  Eli Zaretskii  <eliz@is.elta.co.il>
360
361         * top.c (filename_completer): Set subsequent_name to 1 early on,
362         to prevent an infinite loop if the first file in the directory is
363         a backup file (whose name ends in a `~').
364
365 2000-04-05  Jim Blandy  <jimb@redhat.com>
366
367         * solib.c (update_solib_list): New function.
368         (solib_add): Call update_solib_list, and then read symbols.
369         (info_sharedlibrary_command): Call update_solib_list, not
370         solib_add.
371
372 2000-04-05  Scott Bambrough <scottb@netwinder.org>
373
374         * arm-linux-tdep.c: Resolve implicit function declarations by 
375         including target.h and value.h.  Inclusion of symtab.h is
376         no longer needed.
377
378 2000-04-05  Scott Bambrough <scottb@netwinder.org>
379
380         * arm-linux-tdep.c: New file.
381         * arm-linux-nat.c (fetch_fpregs): Remove unused code.
382         (arm_get_longjmp_target): Moved it and all defines 
383         it uses to arm-linux-tdep.c.
384         (arm_linux_extract_return_value): Moved to
385         arm-linux-tdep.c.
386         * config/arm/linux.mt: Add arm-linux-tdep.c to TDEPFILES.
387
388 2000-04-04  Nick Duffek  <nsd@cygnus.com>
389
390         * infrun.c (handle_inferior_event): Call target_mourn_inferior
391         instead of kill_target.
392
393 2000-04-04  Daniel Berlin  <dan@cgsoftware.com>
394
395         * TODO: Make note of various C++ things i have planned for 5.1.
396
397 Tue Apr  4 12:13:19 2000  Andrew Cagney  <cagney@b1.cygnus.com>
398
399         * printcmd.c (print_scalar_formatted): Use local variable ptr_bit
400         in shift.  Stop GCC thinking it has a shift overflow.
401
402 2000-04-03  H.J. Lu  <hjl@gnu.org>
403
404         * TODO: Remove the regex entry.
405
406 2000-04-03  H.J. Lu  <hjl@gnu.org>
407
408         * gdb_regex.h: New. Include "regex.h" if USE_INCLUDED_REGEX
409         is defined and <regex.h> otherwise.
410
411         * irix5-nat.c: Include "gdb_regex.h" instead of "gnu-regex.h".
412         * monitor.c: Likewise.
413         * osfsolib.c: Likewise.
414         * solib.c: Likewise.
415         * source.c: Likewise.
416         * symtab.c: Likewise.
417
418         * Makefile.in (REGEX): Changed to @REGEX@.
419         (REGEX_CFLAGS): New.
420         (REGEX1): Removed.
421         (ADD_DEPS): Use $(REGEX) instead of $(REGEX1).
422         (INTERNAL_WARN_CFLAGS): Add $(REGEX_CFLAGS).
423
424         * configure.in (--with-included-regex): New switch.
425         (REGEX): New. Subsstitue @REGEX@ in Makefile.in.
426         (REGEX_CFLAGS): New. Subsstitue @REGEX_CFLAGS@ in Makefile.in.
427         * configure: Regenerated.
428
429 2000-04-03  Kevin Buettner  <kevinb@redhat.com>
430
431         * NEWS (powerpc-*-linux*): Mention.
432
433 2000-04-03  J.T. Conklin  <jtc@redback.com>
434
435         * config/i386/xm-nbsd.h (HOST_LONG_DOUBLE_FORMAT): Define.
436
437 2000-04-03  Kevin Buettner  <kevinb@redhat.com>
438
439         * Makefile.in (ALLDEPFILES): Add ia64-linux-nat.c and ia64-tdep.c.
440         (ia64-linux-nat.o, ia64-tdep.o): Add dependencies.
441
442         * ia64-linux-nat.c (fill_gregset): Implement.
443         (supply_fpregset, fill_fpregset): New functions.
444
445         * ia64-tdep.c (ia64_init_extra_frame_info): Revise manner in
446         which the CFM is fetched for certain frames.
447         (find_global_pointer, find_extant_func_descr): Don't use
448         partial symtabs for locating sections.
449
450         * config/ia64/linux.mh (LOADLIBES): Define.
451         (NATDEPFILES): Add linux-thread.o and lin-thread.o.
452         * config/ia64/nm-linux.h (nm-linux.h): Include this upper-level
453         file containing generic linux declarations/definitions.
454         (SVR4_SHARED_LIBS, ATTACH_DETACH): Remove defines; already
455         defined in generic nm-linux.h.
456         (solib.h): Remove include; already included in generic nm-linux.h.
457
458 2000-04-03  Jim Blandy  <jimb@redhat.com>
459
460         * solib.c (solib_add): Move all the code for loading symbol tables
461         below the code to sort out additions and removals.  That way, we
462         always catch all loaded shared libraries whose symbols we haven't
463         grabbed yet.
464
465         * solib.c (solib_add): Don't try to free a shared object's objfile
466         if it doesn't have one.  Duh.
467
468         * solib.c (solib_add): If a pattern was given, but it doesn't
469         match any currently loaded shared libraries, print a message;
470         don't just be silent.
471
472 2000-04-03  Eli Zaretskii  <eliz@is.elta.co.il>
473
474         * go32-nat.c (go32_handle_nonaligned_watchpoint): Use a
475         two-dimensional array instead of faking it with index
476         arithmetics.
477
478 2000-04-03  Eli Zaretskii  <eliz@is.elta.co.il>
479
480         * config/i386/xm-go32.h (HOST_LONG_DOUBLE_FORMAT): Define.
481
482         * config/i386/tm-go32.h (TARGET_LONG_DOUBLE_BIT): Remove
483         definition (and use the common one in tm-i386.h).
484         (REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Likewise.
485         (I386_DJGPP_TARGET): Don't define, it's no longer required.
486         (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): Remove definition,
487         i386-tdep.c defines it for all x86 targets.
488         (LD_I387, HEX_LONG_DOUBLE_INPUT): Remove.
489
490         * config/djgpp/fnchange.lst: Add i386-linux-tdep.c.
491
492         * config/djgpp/djcheck.sh: Edit the copyright year out of the test
493         results.  Fix editing of `main' arguments for non-GNU Sed.
494
495 2000-04-03  Eli Zaretskii  <eliz@is.elta.co.il>
496
497         * symfile.c (map_overlay_command, unmap_overlay_command): Fix
498         error message: there's no "overlay on" command.
499
500 2000-04-03  Eli Zaretskii  <eliz@is.elta.co.il>
501
502         * Makefile.in (copying.c): Depend on copying.txt, not COPYING.
503         (copying.txt): New target, a link to COPYING.
504
505 Mon Apr  3 18:20:03 2000  Andrew Cagney  <cagney@b1.cygnus.com>
506
507         * TODO: Update.
508         
509 Mon Apr  3 14:56:11 2000  Andrew Cagney  <cagney@b1.cygnus.com>
510
511         * top.c: Re-indent.
512         (set_hook, error_hook): Remove PARAMS.
513
514 Mon Apr  3 14:45:25 2000  Andrew Cagney  <cagney@b1.cygnus.com>
515
516         * symtab.h (add_minsym_to_demangled_hash_table): Revert 2000-03-29
517         Daniel Berlin <dan@cgsoftware.com>.  Function was static.
518         * minsyms.c (add_minsym_to_demangled_hash_table): Add prototype.
519
520 Mon Apr  3 14:10:37 2000  Andrew Cagney  <cagney@b1.cygnus.com>
521
522         * gdb-events.h, gdb-events.c, gdb-events.sh: Re-indent.
523
524 2000-04-02  Nick Duffek  <nsd@cygnus.com>
525
526         * gdbtypes.c (safe_parse_type): New wrapper function to ignore
527         error() during parse_and_eval_type().
528         (check_stub_method): Call safe_parse_type instead of
529         parse_and_eval_type().
530         * wrapper.c (gdb_parse_and_eval_type): New wrapper function.
531         (wrap_parse_and_eval_type): New support function.
532         * wrapper.h (gdb_parse_and_eval_type): Prototype.
533         (wrap_parse_and_eval_type): Prototype.
534
535 Sun Apr  2 10:32:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
536
537         * MAINTAINERS: Eli Zaretskii is a doco maintainer.
538
539 Fri Mar 31 08:59:58 2000  Andrew Cagney  <cagney@b1.cygnus.com>
540
541         * gdbarch-utils.h, gdbarch-utils.c: New files.
542         * Makefile.in (SFILES, COMMON_OBS): Update.
543         (gdbarch_utils_h) Define.
544         (gdbarch-utils.o): Add dependencies.
545         
546         * gdbarch.c, gdbarch.sh: Include "gdbarch-utils.h". Fix code
547         handling default method values.
548         (startup_gdbarch): Rename default_gdbarch, name misleading.
549         (breakpoint_from_pc): Default to legacy_breakpoint_from_pc.
550         (register_name): Default to legacy_register_name.
551         (call_dummy_words): Default to legacy_call_dummy_words.
552         (sizeof_call_dummy_words): Default to
553         legacy_sizeof_call_dummy_words.
554         (register_convertible): Default to
555         generic_register_convertible_not.
556         (breakpoint_from_pc): Default to legacy_breakpoint_from_pc.
557         (remote_translate_xfer_address): Default to
558         generic_remote_translate_xfer_address.
559         (frameless_function_invocation): Default to
560         generic_frameless_function_invocation_not.
561
562 2000-04-02  Mark Kettenis  <kettenis@gnu.org>
563
564         * i386-linux-nat.c: Add copyright notice.
565
566         * config/i386/xm-linux.h (HOST_LONG_DOUBLE_FORMAT): Define as
567         &floatformat_i387_ext.
568         * config/i386/xm-i386gnu.h (HOST_LONG_DOUBLE_FORMAT): Likewise.
569
570 2000-03-29  Mark Kettenis  <kettenis@gnu.org>
571
572         * findvar.c (extract_floating): Remove reference to
573         TARGET_EXTRACT_FLOATING.
574         (store_floating): Remove reference to TARGET_STORE_FLOATING.
575
576 2000-03-30  Fernando Nasser  <fnasser@cygnus.com>
577
578         * wrapper.c (gdb_value_subscript, wrap_value_subscript): New functions.
579         Safe version of value_subscript.
580         * varobj.c (): Use gdb_value_subscript() to get an array element value.
581
582 2000-03-30  Michael Snyder  <msnyder@cleaver.cygnus.com>
583
584         * ui-file.c: Include "gdb_string.h"
585         * cli-out.c: Include gdb_string.h to avoid compiler warnings.
586         * wrapper.[ch] (struct gdb_wrapper_arguments): Change fields into 
587         unions, since they are all used to hold both pointers and ints
588         at various times.  Casting pointer to int and vice versa gives
589         warnings (and is not safe) if they are not the same size.
590         
591 2000-03-30  Michael Snyder  <msnyder@cleaver.cygnus.com>
592
593         * defs.h (struct continuation_arg): Make 'data' a union, to avoid
594         casting problems when int and pointer are not the  same size.
595         * event-top.c (command_handler): Use data as a union.
596         (command_line_handler_continuation): Ditto.
597         * infcmd.c (step_1_continuation): Use data as a union.  Re-indent.
598         (step_once): ditto.  (finish_command_continuation): Ditto.
599         (finish_command): Ditto.  
600         * breakpoint.c (until_break_command): Use data as a union.
601         (until_break_command_continuation): Ditto.
602         * utils.c (add_intermediate_continuation): Fix typo in comment.
603
604 Thu Mar 30 12:09:50 2000  Andrew Cagney  <cagney@b1.cygnus.com>
605
606         * gdbarch.h, gdbarch.c: Re-indent.  Remove FIXMEs.
607         * gdbarch.sh: Re-sync with gdbarch.[hc].
608
609 2000-03-29  Daniel Berlin  <dan@cgsoftware.com>
610
611         * minsyms.c (add_minsym_to_demangled_hash_table): New function.
612         (install_minimal_symbols): Fix demangled symbol problems caused by
613         using add_minsym_to_hash_table for the demangled names, which is
614         wrong. Now we use add_minsym_to_demangled_hash_table.
615         (lookup_minimal_symbol): Fix problems with demangled symbol lookup
616         caused by weird control flow.
617         * symtab.h: Add add_minsym_to_demangled_hash_table prototype here.
618
619 2000-03-29  Jason Merrill  <jason@casey.cygnus.com>
620
621         * configure.in: -linux-gnu*, not -linux-gnu.
622
623 Tue Mar 28 18:28:40 2000  Andrew Cagney  <cagney@b1.cygnus.com>
624
625         * remote.c (remote_threads_extra_info): Replace qfThreadExtraInfo
626         with qThreadExtraInfo.
627
628 2000-03-29  J.T. Conklin  <jtc@redback.com> 
629  
630         * i386nbsd-nat.c (fetch_core_registers): Make static. 
631  
632         * m68knbsd-nat.c (fetch_core_registers): Make static. 
633         (m68knbsd_core_fns, _initialize_m68knbsd_nat): Added. 
634  
635 Wed Mar 29 13:40:40 2000  Andrew Cagney  <cagney@b1.cygnus.com>
636
637         * TODO: Update GDB 5 status.
638
639 Wed Mar 29 10:16:35 2000  Andrew Cagney  <cagney@b1.cygnus.com>
640
641         * breakpoint.h (remove_hw_watchpoints): Add declaration.
642         * breakpoints.c (remove_hw_watchpoints): Update.
643         * maint.c (maintenance_do_deprecate): Avoid assignment within IF
644         condition.
645
646 2000-03-28  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
647
648         breakpoint.c, breakpoint.h (remove_hw_watchpoints):  New function.
649         infrun.c (resume):  Remove hardware watchpoints before stepping
650         when CANNOT_STEP_HW_WATCHPOINTS is nonzero.
651
652 2000-03-28  Michael Snyder  <msnyder@cleaver.cygnus.com>
653
654         * Makefile.in: Anchor tui-file.h dependency to $srcdir.
655
656 2000-03-28  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
657
658         * procfs.c (proc_set_watchpoint):  Declare addr parameter as
659         CORE_ADDR, to match call from procfs_set_watchpoint.
660
661         * breakpoint.c (insert_breakpoints, do_enable_breakpoint):  
662         Reselect the saved frame silently after frame selection for 
663         watchpoint evaluation.
664         (insert_breakpoints):  Add missing space in `Hardware watchpoint
665         deleted' message.  Do not reinsert hardware watchpoint if it is
666         already marked for deletion at next stop.
667
668 2000-03-28  Christopher Faylor  <cgf@cygnus.com>
669
670         * partial-stab.h: Add one more check against corrupted or irregular
671         stabs entry.
672
673 Tue Mar 28 12:23:37 2000  Philippe De Muyter  <phdm@macqel.be>
674
675         * gnu-regex.c (regerror): Function renamed from `__regerror'.
676         (Change also approved in the mainline glibc sources)
677
678 Tue Mar 28 18:19:50 2000  Andrew Cagney  <cagney@b1.cygnus.com>
679
680         From 2000-03-20 Jonathan Larmour <jlarmour@redhat.co.uk>:
681         * ser-unix.c (do_unix_readchar): Reorganise to be more robust,
682         particularly ensuring it can't return SERIAL_TIMEOUT when told
683         not to time out.
684
685 2000-03-24  Daniel Berlin  <dan@cgsoftware.com>
686
687         * gdbtypes.c (_initialize_gdbtypes): Add "set debug overload",
688         which never existed before, and thus, has no deprecated old command.
689
690         * gdbarch.c (_initialize_gdbarch): Add "set debug arch", deprecate
691         "set archdebug" (same goes for the show commands).
692         * gdb-events.c (_initialize_gdb_events): Add "set debug event",
693         deprecate "set eventdebug" (same goes for the show commands).
694         * gdbcmd.h: Add the setdebuglist and showdebuglist externs.
695         * top.c (init_main): Deprecate remotedebug, use "set/show debug remote"
696         instead.
697         x(init_main): Add the "set debug" and "show debug" commands.
698         Add setdebuglist and showdebuglist.
699
700 Fri Mar 24 13:00:10 2000  Daniel Berlin <dan@cgsoftware.com>
701
702         * maint.c (maintenance_do_deprecate): Fix crash if you call with no arguments, and fixed the warning.
703           Added prototype for the deprecate command so it doesn't complain.
704
705 Tue Mar 28 11:52:45 2000  Andrew Cagney  <cagney@b1.cygnus.com>
706
707         * top.c (print_gdb_version): Bump copyright year to 2000.
708
709 Tue Mar 28 10:13:11 2000  Andrew Cagney  <cagney@b1.cygnus.com>
710
711         * MAINTAINERS: Add Glen McCready to write after approval list.
712
713 Tue Mar 28 09:59:00 2000  Andrew Cagney  <cagney@b1.cygnus.com>
714
715         * acconfig.h: Fix typo in comment describing HAVE_PTRACE_GETREGS.
716         * config.h: Regenerate.
717         
718 Mon Mar 27 19:53:29 2000  Andrew Cagney  <cagney@b1.cygnus.com>
719
720         * TODO: Update.  Add criteria for next release of GDB.
721
722 Mon Mar 27 17:20:25 2000  Andrew Cagney  <cagney@b1.cygnus.com>
723
724         * acconfig.h: Provide default for HAVE_PTRACE_GETREGS.
725         * config.h: Regenerate.
726
727 Mon Mar 27 16:43:35 2000  Andrew Cagney  <cagney@b1.cygnus.com>
728
729         * Makefile.in (install-only): Create $(bindir) and $(man1dir)
730         before installing GDB.
731
732 Mon Mar 27 16:26:11 2000  Andrew Cagney  <cagney@b1.cygnus.com>
733
734         * Makefile.in (all-gdbtk): Check for an existing link/directory.
735         Re-format warning message.  Document that post 5.0 this can be
736         deleted.
737
738 Mon Mar 27 14:46:37 2000  Andrew Cagney  <cagney@b1.cygnus.com>
739
740         * ChangeLog: Revert whitespace changes.
741
742 Mon Mar 27 10:20:34 2000  Andrew Cagney  <cagney@b1.cygnus.com>
743
744         * MAINTAINERS: Update folks who need accounts.
745
746 Mon Mar 27 09:29:14 2000  Andrew Cagney  <cagney@b1.cygnus.com>
747
748         * MAINTAINERS: J.T. Conklin is NetBSD maintainer.
749
750 2000-03-27  Mark Kettenis  <kettenis@gnu.org>
751
752         * config/i386/tm-i386.h: Fix typo.  It is TARGET_LONG_DOUBLE_BIT
753         instead of TARGET_LONG_DOUBLE_BITS.
754         * config/i386/tm-i386mk.h: Likewise.
755
756 2000-03-26  Mark Kettenis  <kettenis@gnu.org>
757
758         Provide `long double' support for most i386 targets.
759         * config/i386/tm-i386.h (TARGET_LONG_DOUBLE_FORMAT): Define as
760         &floatformat_i387_ext.
761         (TARGET_LONG_DOUBLE_BITS): Define as 96.
762         (REGISTER_VIRTUAL_TYPE): Change type for FPU registers to
763         `builtin_type_long_double'.
764         (REGISTER_CONVERT_TO_VIRTUAL): Call
765         i386_register_convert_to_virtual.
766         (REGISTER_CONVERT_TO_RAW): Call i386_register_convert_to_raw.
767         (i387_to_double, double_to_i387): Remove prototypes.
768         (i386_extract_return_value): Change prototype to match definition
769         in i386-tdep.c.
770         * config/i386/tm-i386mk.h (TARGET_LONG_DOUBLE_FORMAT): #undef.
771         (TARGET_LONG_DOUBLE_BITS): #undef.
772         * config/i386/tm-linux.h (TARGET_LONG_DOUBLE_BIT): Remove.
773         [HAVE_LONG_DOUBLE && HOST_I386] (LD_I387): Remove.
774         (i387_extract_floating, i387_store_floating): Remove prototypes.
775         (TARGET_EXTRACT_FLOATING, TARGET_STORE_FLOATING): Remove.
776         (REGISTER_CONVERT_TO_VIRTUAL, REGOISTER_CONVERT_TO_RAW): Remove.
777         (REGISTER_VIRTUAL_TYPE): Remove.
778         * i386-tdep.c (i386_register_convert_to_virtual): New function.
779         (i386_register_convert_to_raw): New function.
780         * i387-tdep.c [LD_I387] (i387_extract_floating): Remove.
781         (i387_store_floating): Remove.
782
783 Sat Mar 25 18:55:57 2000  Andrew Cagney  <cagney@b1.cygnus.com>
784
785         * maint.c: Re-indent.
786
787 Sat Mar 25 18:51:50 2000  Andrew Cagney  <cagney@b1.cygnus.com>
788
789         * maint.c (_initialize_maint_cmds): Remove quoted trailing space.
790
791 2000-03-24  Christopher Faylor  <cgf@cygnus.com>
792
793         * config/mips/tm-wince.h: Fix typo which caused include of tm-mips.h to
794         be inoperative.
795
796 2000-03-24  Christopher Faylor  <cgf@cygnus.com>
797
798         * win32-nat.c: Back out special frame walking code.  It was broken.
799         (handle_exception): Correctly identify an illegal instruction.
800         * config/tm-cygwin.h: Eliminate special frame handling.  Just use
801         normal i386 handling.
802
803 2000-03-24  J.T. Conklin  <jtc@redback.com> 
804  
805         * i386/tm-nbsd.h (USE_STRUCT_CONVENTION): Define. 
806         * i386nbsd-nat.c (i386nbsd_use_struct_convention): New function. 
807         (fetch_core_registers): Read fp registers. 
808         (i386nbsd_core_fns, _initialize_i386nbsd_nat): Added. 
809  
810 2000-03-24  Jonathan Larmour  <jlarmour@redhat.co.uk>
811
812         * arm-tdep.c (thumb_skip_prologue): Take function end addr argument
813         so that we can stop searching for the prologue past the function end
814         (arm_skip_prologue): Call thumb_skip_prologue with function end addr
815
816 2000-03-24  Kevin Buettner  <kevinb@redhat.com>
817
818         * linux-thread.c, lin-thread.c (save_inferior_pid,
819         restore_inferior_pid): Don't do compile time comparison
820         of TARGET_PTR_BIT and TARGET_INT_BIT.
821
822 Thu Mar 23 13:18:26 2000  Philippe De Muyter  <phdm@macqel.be>
823
824         * m68k-tdep.c (P_LINKL_FP, P_LINKW_FP): Macros renamed from P_LINK_L
825         and P_LINK_W.
826         (P_PEA_FP, P_MOVL_SP_FP): New macros.
827         (P_MOVL, P_LEAL, P_MOVML): Macros renamed from P_MOV_L, P_LEA_L and
828         P_MOVM_L.
829         (altos_skip_prologue, isi_skip_prologue): Use P_* macros, not octal
830         constants.
831         (delta68_in_sigtramp): New function.
832         (delta68_frame_args_address, delta68_frame_saved_pc): Ditto.
833         (m68k_skip_prologue): Use P_* macros, not hex constants.
834         (m68k_find_saved_regs): Do not expect a fixed sequence of register save
835         instructions, but accept them in any order; use P_* macros, not octal
836         or hex constants; recognize also `fmovemx to (fp + displacement)' and
837         `moveml to (fp + displacement)'.
838         * m68/tm-delta68.h (IN_SIGTRAMP): New macro.
839         (FRAME_SAVED_PC, FRAME_ARGS_ADDRESS): Ditto.
840         
841 Fri Mar 24 13:44:57 2000  Andrew Cagney  <cagney@b1.cygnus.com>
842
843         * MAINTAINERS: Add Fernando Nasser to testsuite maintainers. 
844         
845 2000-03-23  Michael Snyder  <msnyder@cleaver.cygnus.com>
846
847         * solib.c (open_symbol_file_object): To sneak an int argument
848         past catch_errors, instead of casting it to a pointer, simply
849         pass it by address.
850
851 2000-03-23  Jimmy Guo   <guo@cup.hp.com>
852
853         * gdbtypes.c (rank_function): Rank all N parameters and use correct
854         index into the prams[] and args[] arrays.
855
856 2000-03-23  Fernando Nasser  <fnasser@cygnus.com>
857
858         From David Whedon <dwhedon@gordian.com>
859
860         * top.c (execute_command): Checks all commands beore executing
861         to see if the user needs to be warned that the command is
862         deprecated, warns user if appropriate.
863         (add_info), (add_info_alias), (add_com) , (add_com_alias): Changed
864         return values from void to struct cmd_list_element *.
865         * command.c (lookup_cmd_1): Check aliases before following link 
866         in case user needs to be warned about a deprecated alias.
867         (deprecate_cmd): new exported function for command deprecation,
868         sets flags and posibly a replacement string.
869         (deprecated_cmd_warning): New exported funciton to warn user about
870         a deprecated command. 
871         (lookup_cmd_composition): New exported function that determines
872         alias, prefix_command, and cmd based on a string.  This is useful
873         is we want to full name of a command.
874         * command.h : Added prototypes for deprecate_cmd,
875         deprecated_warn_user and lookup_cmd_composition, added flags to
876         the cmd_list_element structure, changed return values for
877         add_com_* and add_info_* from void to cmd_list_element.
878         * maint.c : (maintenance_deprecate): New function to deprecate a
879         command.  This exists only so that the testsuite can deprecate
880         commands at runtime and check the warning behavior.
881         (maintenance_undeprecate) : New function, drops deprecated flags.
882         (maintenance_do_deprecate): Actually does the (un)deprecation.
883         (initialize_maint_cmds): Added the above new deprecate commands.
884
885 2000-03-22  Daniel Berlin  <dan@cgsoftware.com>
886         * command.c (apropos_cmd_helper): New function, meat of the
887         apropos command.
888         (apropos_command): New apropos command to search command
889         names/documentation for regular expressions.
890         (_initialize_command): Add the apropos command.
891
892 2000-03-23  Michael Snyder  <msnyder@cleaver.cygnus.com>
893
894         * sol-thread.c (ps_pglobal_lookup): Change argument type from
895         paddr_t to psaddr_t.  This mistake appears to date from an
896         erroneous man page in Solaris 2.5 -- the correct type from the
897         system headers has always been psaddr_t.
898         (ps_pdread, ps_pdwrite, ps_ptread, ps_ptwrite): Ditto.
899         (rw_common): Ditto.
900
901 2000-03-22  Kevin Buettner  <kevinb@redhat.com>
902
903         * ia64-linux-nat.c: Fix copyright.
904         (fill_gregset): Minor formatting fix.
905         * ia64-tdep.c (template_encoding_table, fetch_instruction,
906         examine_prologue): Clean up some compiler warnings.
907         (is_float_or_hfa_type_recurse, is_float_or_hfa_type, find_func_descr,
908         find_global_pointer, find_extant_func_descr): New functions.
909         (ia64_use_struct_convention, ia64_extract_return_value,
910         ia64_push_arguments): Handle HFAs.
911         (ia64_push_arguments): Find (or build) a function descriptor
912         when given a function address.
913         (ia64_push_return_address): Moved code for finding the
914         global pointer into its own function, find_global_pointer ().
915
916 2000-03-22  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
917
918         * event-loop.c (handle_file_event): Run through indent.
919
920 2000-03-22  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
921
922         From  Philippe De Muyter  <phdm@macqel.be>
923
924         * event-loop.c (sys/types.h): File now included unconditionally.
925         (use_poll): New variable..
926         (gdb_notifier): poll- and select-versions merged.
927         (add_file_handler): If HAVE_POLL, check whether poll is usable,
928         and reset `use_poll' if not.
929         (create_file_handler): Select poll- or select-version according to
930         `use_poll'.
931         (delete_file_handler, handle_file_event): Likewise.
932         (gdb_wait_for_event, poll_timers): Likewise.
933
934 2000-03-22  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
935
936         * printcmd.c (print_scalar_formatted):  Truncate addresses to the
937         size of a target pointer before passing them to print_address.
938
939 2000-03-22  Mark Kettenis  <kettenis@gnu.org>
940
941         * config/i386/tm-i386aix.h (I386_AIX_TARGET): Remove.
942         * config/i386/tm-linux.h (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM):
943         Remove
944         * i386-tdep.c (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): New defines.
945         (i386_extract_return_value): Rewritten.  Correctly support all
946         floating-point types and large integer types on targets that use
947         the standard i386 GDB register layout and return floating-point
948         values in the FPU.
949
950 Wed Mar 22 15:09:34 2000  Andrew Cagney  <cagney@b1.cygnus.com>
951
952         * configure.in (CONFIG_INITS): Do not append remote-nrom.c
953
954 2000-03-21  J.T. Conklin  <jtc@redback.com> 
955  
956         * i386/nbsd.mh (NATDEPFILES): Change i386b-nat.o to i386nbsd-nat.o. 
957         * i386nbsd-nat.c: New file. 
958  
959         * i386/tm-nbsd.h (NUM_REGS): Removed. 
960         (HAVE_I387_REGS): Defined. 
961         * i386/nm-nbsd.h (FLOAT_INFO): Removed. 
962  
963         * tm-nbsd.h (IN_SOLIB_CALL_TRAMPOLINE): Define if not 
964         SVR4_SHARED_LIBS. 
965
966 Wed Mar 22 11:18:59 2000  Andrew Cagney  <cagney@b1.cygnus.com>
967
968         * MAINTAINERS: Add Jim Blandy to breakpoint maintainers.  David
969         taylor is the Solaris/SPARC maintainer.  Add Jonathan Larmour to
970         the write after approval list.
971
972 2000-03-21  Kevin Buettner  <kevinb@redhat.com>
973
974         * symtab.h (MAX_SECTIONS, struct section_addr_info,
975         symbol_file_add):  Move declarations from here...
976         * symfile.h: ...to here.
977
978         * solib.c (symbol_add_stub): Make symbol_file_add () aware of
979         all section addresses, not just .text.
980         * symfile.h, symfile.c (free_section_addr_info,
981         build_section_addr_info_from_section_table): New functions.
982
983         * symfile.h (MAX_SECTIONS): Increase value to 40.
984         * symfile.c (syms_from_objfile): Add bounds check prior to
985         accessing ``other'' array in a section_addr_info_struct.
986         Remove unused variable section_offsets.
987         (add_symbol_file_command): Remove unused variable text_addr.
988
989 2000-03-21  Eli Zaretskii  <eliz@is.elta.co.il>
990
991         * breakpoint.c (bpstat_stop_status): Don't stop if a read
992         watchpoint appears to break, but the watched value changed.
993
994 2000-03-21  Jim Blandy  <jimb@redhat.com>
995
996         * gdbarch.sh: Emit a definition and declaration for gdbarch_free,
997         a companion to gdbarch_alloc, which allows a gdbarch init function
998         to free partially-built gdbarch structures.
999         * gdbarch.c, gdbarch.h: Regenerated.
1000
1001 2000-03-20  Kevin Buettner  <kevinb@redhat.com>
1002
1003         * configure.host, configure.tgt (ia64-*-linux*): New entry.
1004
1005         * gdbserver/low-linux.c (u_offsets, ia64_register_u_addr,
1006         initialize_arch): Define for IA-64.
1007         (initialize_arch): Add declaration.
1008
1009 2000-03-20  Eli Zaretskii  <eliz@is.elta.co.il>
1010
1011         * breakpoint.c (insert_breakpoints, remove_breakpoint)
1012         (bpstat_stop_status, can_use_hardware_watchpoint): Don't insert,
1013         remove, or check status of hardware watchpoints for entire structs
1014         and arrays unless the user explicitly asked to watch that struct
1015         or array.  
1016         (insert_breakpoints): Try to insert watchpoints for all the values
1017         on the value chain, even if some of them fail to insert.
1018
1019         * values.c (value_primitive_field): Set the offset in struct value
1020         we return when the field is a packed bitfield.
1021
1022 2000-03-20  Michael Snyder  <msnyder@cleaver.cygnus.com>
1023
1024         * remote.c (remote_threads_extra_info): New function.
1025         Implement the extra thread info query for "info threads".
1026         (remote_threads_info): Clean up a bit.
1027         (use_threadinfo_query, use_threadextra_query): New variables.
1028         Control whether GDB will use the new or old protocol for 
1029         thread info queries.
1030         (remote_open_1): Initialize new variables.
1031         (remote_async_open_1): Ditto.
1032         (remote_cisco_open): Ditto.
1033
1034 2000-03-20  Kevin Buettner  <kevinb@redhat.com>
1035
1036         * ia64-linux-nat.c, ia64-tdep.c, config/ia64/linux.mh,
1037         config/ia64/linux.mt, config/ia64/nm-linux.h, config/ia64/tm-ia64.h,
1038         config/ia64/tm-linux.h, config/ia64/xm-linux.h: New files.
1039
1040 2000-03-20  Kevin Buettner  <kevinb@redhat.com>
1041
1042         * utils.c (floatformat_from_doublest): Don't assume that a long
1043         will be exactly 32 bits in length.  Also...  make sure space
1044         that we're writing the float to is completely initialized to
1045         zeroes, even when the number of bits in the float is not
1046         evenly divisible by FLOATFORMAT_CHAR_BIT.
1047
1048 2000-03-20  Jim Blandy  <jimb@redhat.com>
1049
1050         * i386-linux-nat.c: No need to #include "frame.h" any more.
1051         (LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0,
1052         LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1,
1053         LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code,
1054         LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start,
1055         LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
1056         LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1,
1057         linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN,
1058         i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp,
1059         i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET,
1060         i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET,
1061         i386_linux_sigtramp_saved_sp):  Deleted.  Folks rightly pointed
1062         out that these are target-dependent, and useful in non-native
1063         configurations.  Moved to...
1064         * i386-linux-tdep.c: ... Here, a new file.
1065         * Makefile.in (ALLDEPFILES): Add i386-linux-tdep.c.
1066         (i386-linux-tdep.o): New rule.
1067         (i386-linux-nat.o): We no longer depend on frame.h.
1068         * config/i386/linux.mt (TDEPFILES): Add i386-linux-tdep.o.
1069
1070 2000-03-04  Eli Zaretskii  <eliz@is.elta.co.il>
1071
1072         * event-loop.c (top-level) [NO_FD_SET]: Deprecate this branch.
1073         Print an error at compile time if we are to use select, but FD_SET
1074         is not available.
1075         (SELECT_MASK, NBBY, FD_SETSIZE, NFDBITS, MASK_SIZE): Define only
1076         if HAVE_POLL is not defined and NO_FD_SET *is* defined.
1077         (create_file_handler) [!HAVE_POLL]: Use FD_SET and FD_CLR.
1078         (delete_file_handler) [!HAVE_POLL]: Use FD_CLR and FD_ISSET.
1079         (gdb_wait_for_event) [!HAVE_POLL]: Copy fd_set sets directly
1080         instead of using memcpy and memset.  Use FD_ISSET.
1081
1082         * config/i386/xm-go32.h (fd_mask): Remove typedef.
1083
1084 Mon Mar 20 19:58:45 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1085
1086         * command.c (_initialize_command): Document requirements for ``!''
1087         command.
1088
1089 Mon Mar 20 18:12:46 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1090
1091         From Fri 10 Mar 2000 Robert
1092         <robert.melchers@drives.eurotherm.co.uk>:
1093         * sh-tdep.c (sh_processor_type_table): Add entry for sh2.
1094
1095 Mon Mar 20 17:33:32 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1096
1097         From Thu Mar 16 16:49:27 EST 2000 John David Anglin
1098         <dave@hiauly1.hia.nrc.ca>:
1099         * configure.in (CONFIG_INITS): Don't include hpux-thread.c. Stops
1100         _initialize_hpux_thread being called twice.
1101         * configure: Regenerated.
1102
1103 2000-03-19  Eli Zaretskii  <eliz@is.elta.co.il>
1104
1105         * event-top.c (_initialize_event_loop): If instream is not
1106         connected to a terminal device, turn editing off.
1107
1108 2000-03-19  Eli Zaretskii  <eliz@is.elta.co.il>
1109
1110         Support for building GDB with DJGPP, and running the test suite on
1111         it:
1112         * config/djgpp/djconfig.sh: New file.
1113         * config/djgpp/config.sed: New file.
1114         * config/djgpp/README: New file.
1115         * config/djgpp/fnchange.lst: New file.
1116         * config/djgpp/djcheck.sh: New file.
1117
1118 2000-03-19  Eli Zaretskii  <eliz@is.elta.co.il>
1119
1120         * ser-go32.c (ports): Make the initializers complete, to pacify
1121         GCC 2.9X.
1122
1123 2000-03-17  Jim Blandy  <jimb@redhat.com>
1124
1125         * i386v-nat.c (i386_insert_nonaligned_watchpoint): Use a
1126         two-dimensional array, instead of faking it with explicit index
1127         arithmetic.
1128
1129         * linux-thread.c (linuxthreads_attach, linuxthreads_detach,
1130         linuxthreads_create_inferior): Fix typo in variable name: it's
1131         linuxthreads_exit_status, not linux_exit_status.
1132
1133         * gdb_wait.h (WSETSTOP): Pass the appropriate number of arguments
1134         to W_STOPCODE.
1135
1136         * solib.c (solib_add): Delete debugging code.
1137
1138 2000-03-17  Mark Kettenis  <kettenis@gnu.org>
1139
1140         * gdb_wait.h: add definitions of WSETSTOP and WSETEXIT for Linux.
1141         * linux-thread.c: Use WSETSTOP instead of W_STOPCODE.
1142
1143 Fri Mar 17 11:06:59 2000  Philippe De Muyter  <phdm@macqel.be>
1144
1145         * language.c (set_lang_str): Do not call `free' for a null pointer.
1146         (set_type_str, set_range_str): Ditto.
1147
1148 2000-03-16  Jim Blandy  <jimb@redhat.com>
1149
1150         * i386-linux-nat.c (i386_linux_saved_pc_after_call): Lost in the
1151         merge; reinstated.
1152
1153         * solib.c (current_sos): Be more careful about freeing the new
1154         so_list node if an error occurs.
1155
1156         * i386-tdep.c (LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0,
1157         LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1,
1158         LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code,
1159         LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start,
1160         LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
1161         LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1,
1162         linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN,
1163         i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp,
1164         i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET,
1165         i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET,
1166         i386_linux_sigtramp_saved_sp):  Deleted.  These all implement
1167         Linux-specific signal trampoline detection, and should be moved
1168         to...
1169         * i386-linux-nat.c: ... here.
1170         * config/i386/tm-linux.h (I386_LINUX_SIGTRAMP): No need to define
1171         this any more, since we're not enabling OS-specific code in a
1172         OS-independent file.
1173         
1174 2000-03-16  Eli Zaretskii  <eliz@is.elta.co.il>
1175
1176         * Makefile.in (go32-nat.o): Add prerequisites.
1177         (ALLDEPFILES): Add go32-nat.c.
1178
1179 2000-03-15  Michael Snyder  <msnyder@cleaver.cygnus.com>
1180
1181         From "Peter.Schauer" <Peter.Schauer@regent.e-technik.tu-muenchen.de>
1182         * symfile.c (reread_symbols):  Clear msymbol hash table.
1183
1184 2000-03-15  Jim Blandy  <jimb@redhat.com>
1185
1186         Deal with the inferior unloading shared objects.
1187         * solib.c (current_sos): New function, replacing find_solib.
1188         (find_solib): Deleted.
1189         (free_so): New function.
1190         (clear_solib): Call free_so, instead of writing it out.
1191         (solib_add): Rewritten: compare the inferior's current list of
1192         shared objects with GDB's list, and do the required loads and
1193         unloads.
1194         (info_sharedlibrary_command, solib_address): Don't use find_solib
1195         to walk the list of shared libraries: call solib_add, and then
1196         walk the list at so_list_head normally.
1197         * objfiles.c (free_objfile): Don't call CLEAR_SOLIB, and don't
1198         detach the core target.  These tasks are taken care of elsewhere.
1199         * target.c (remove_target_sections): New function.
1200         * target.h (remove_target_sections): New declaration.
1201
1202         * solib.c (symbol_add_stub): Check whether we've already created
1203         an objfile for this shared object first, before doing all that
1204         work to compute section addresses, etc.
1205
1206         * objfiles.c (unlink_objfile): Report an internal error if objfile
1207         doesn't occur in the object_files list.
1208
1209         * solib.c (special_symbol_handling): Delete argument; it's not
1210         used.
1211         
1212         Changes from Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
1213
1214         * solib.c (SOLIB_EXTRACT_ADDRESS):  New macro to extract addresses
1215         from solib structures. Use it throughout solib.c, get rid of all
1216         CORE_ADDR casts.
1217         (struct so_list):  Change type of lmaddr to CORE_ADDR.
1218         (first_link_map_member):  Change return value type to CORE_ADDR,
1219         update callers.
1220         (solib_add_common_symbols):  Change parameter type to CORE_ADDR,
1221         update callers.
1222         (open_symbol_file_object, find_solib):  Change type of lm variable
1223         to CORE_ADDR.
1224
1225 2000-03-15  Eli Zaretskii  <eliz@is.elta.co.il>
1226
1227         * ser-go32.c (dos_noop, dos_raw, dos_noflush_set_tty_state)
1228         (dos_print_tty_state, dos_info, _initialize_ser_dos): Convert
1229         to ISO C.  Use ATTRIBUTE_UNUSED to avoid compiler warnings.
1230         (dos_info): Avoid compiler warning when printing a ptrdiff_t.
1231
1232         * ser-go32.c (dos_get_tty_state): Fail if the (fake) handle was
1233         not opened by dos_open, but let the 3 standard handles go through
1234         unharmed.
1235
1236 2000-03-14  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
1237
1238         * eval.c (evaluate_subexp_with_coercion): Add call to
1239         check_typedef, to handle typedeffed vars correctly.
1240
1241 Mon Mar 13 21:21:41 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1242
1243         * defs.h (STREQ, STRCMP, STREQN): Document that these macros are
1244         somewhat redundant.
1245         (QUIT): Note that this can probably be replaced by a function.
1246
1247 2000-03-13  James Ingham  <jingham@leda.cygnus.com>
1248
1249         Add support for a variable object that tries to evaluate itself in 
1250         the currently selected frame, rather than in a fixed frame.
1251         
1252         * wrapper.c,h (gdb_parse_exp_1): Added a wrapper for
1253         gdb_parse_exp_1.
1254         * varobj.h: Added USE_CURRENT_FRAME to varobj_type & changed def'n 
1255         of varobj_create.
1256         * varobj.c (varobj_list): Return type indicates whether the
1257         variable's type has changed (for current frame variables).
1258         (varobj_update): Handle the case where the variable's type has
1259         changed.
1260         (delete_variable_1): Allow for deletion of variables that have not 
1261         been installed yet.
1262         (new_root_variable): Initialize use_selected_frame variable.
1263         (value_of_root): This is where most of the work to handle "current 
1264         frame" variables was added.  Most of the complexity involves
1265         handling the case where the type of the variable has changed.
1266         (varobj_create): Add a "type" argument, to tell if the
1267         variable is one of these "current frame" variables.  Also protect
1268         call to parse_exp_1 from long jumping.
1269         
1270 2000-03-13  Eli Zaretskii  <eliz@is.elta.co.il>
1271
1272         * go32-nat.c (struct env387): Remove declaration.
1273         (print_387_status, i386_go32_float_info): Remove redundant
1274         functions.
1275         (regno_mapping, sig_map, excepn_map): Add braces around inner
1276         initializers.
1277         (many functions): Use ATTRIBUTE_UNUSED to shut up the compiler;
1278         fix code which mixed signed with unsigned.
1279         (go32_resume): Use TARGET_SIGNAL_LAST instead of -1.
1280         (go32_wait): Initialize INT3_addr.
1281         (go32_fetch_registers): Extend all FP registers that are shorter
1282         than 4 bytes to 32 bits.  Support 32 standard FP registers defined
1283         on config/i386/tm-i386.h.
1284         (store_register): Support 32 FP registers.
1285         (go32_create_inferior): Don't crash if handed a NULL pointer
1286         instead of exec file name.
1287         (ignore): Remove unused function.
1288         (go32_insert_hw_breakpoint): Remove unused variables.
1289         (init_go32_ops): Set value of processing_gcc_compilation to 2.
1290
1291 Mon Mar 13 18:54:42 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1292
1293         From 2000-03-10 Daniel Berlin <dan@cgsoftware.com> Fix C++
1294         overloading, add support for seeing through references:
1295         * valops.c (find_overload_match): Handle STABS overloading for
1296         C++.
1297         (find_overload_match): Look in right place for function arguments
1298         in the debug info.
1299         (find_overload_match): Rather than giving up when we have >1
1300         perfect match, just choose one, especially since the
1301         recommendation GDB gives ("disambiguate it by specifying function
1302         signature"), is basically impossible.
1303         (check_field_in): STREQ->strcmp_iw
1304         (search_struct_field): STREQ->strcmp_iw
1305         (find_method_list): STREQ->strcmp_iw
1306         * gdbtypes.c (rank_one_type): Add ability to see through
1307         references.
1308         (rank_one_type): strcmp->strcmp_iw, because the whitespace could
1309         be different.
1310         (rank_function): Rank function properly (was doing it wrong
1311         before, comparing the wrong parts of the arrays)
1312         (rank_one_type): Change #if 0 to #ifdef DEBUG_OLOAD.
1313         * gdbtypes.h: Add REFERENCE_CONVERSION_BADNESS for "badness"
1314         associated with converting a non-reference to a reference.
1315
1316         * gdbtypes.c (rank_one_type): Add comment on how to eliminate the
1317         #ifdef DEBUG_OLOAD.
1318         
1319 2000-03-11  Mark Kettenis  <kettenis@gnu.org>
1320
1321         * gnu-nat.c: Fix the formatting where indent misinterpreted `&' as
1322         a binary operator.
1323         (gnu_attach): Change error message for missing
1324         argument to be identical to the corresponding message in
1325         `inftarg.c'.  This makes the testsuite happy.
1326
1327 2000-03-11  Mark Kettenis  <kettenis@gnu.org>
1328
1329         * i386gnu-nat.c (gnu_store_registers): Make sure the T bit in the
1330         %eflags isn't modified.  This fixes a bug where every call to a
1331         function in the program beyond the first call would fail.
1332
1333 Fri Mar 10 11:44:55 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1334
1335         * MAINTAINERS: Devolve responsibility for domain maintenance.
1336
1337 2000-03-06  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
1338
1339         * minsyms.c (prim_record_minimal_symbol_and_info): Add comment.
1340
1341 2000-02-25  Scott Bambrough <scottb@netwinder.org>
1342
1343         * gdb.base/long_long.exp: Correct test suite failure when printing
1344         a long long value as a double on ARM platforms.
1345
1346 Thu Mar  9 14:21:07 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1347
1348         * MAINTAINERS (Core): Anthony Green is the Java - including
1349         testsuite - maintainer.  Reformat testsuite and language support
1350         sections
1351
1352 2000-03-08  Mark Kettenis  <kettenis@gnu.org>
1353
1354         * i386-tdep.c (i386_linux_saved_pc_after_call): New function.
1355         * config/i386/tm-linux.h (SAVED_PC_AFTER_CALL): Define to call
1356         i386_linux_saved_pc_after_call.
1357
1358 2000-03-06  Jim Blandy  <jimb@redhat.com>
1359
1360         From Tom Tromey <tromey@cygnus.com> and Keith Seitz <?>:
1361
1362         * minsyms.c: #include <ctype.h>, for msymbol_hash_iw.
1363         (compact_minimal_symbols): Added `objfile' argument.
1364         Put symbols in the objfile's hash table.
1365         (install_minimal_symbols): Put symbols in the objfile's demangled
1366         hash table.
1367         (lookup_minimal_symbol): Use hash table to find symbol in
1368         objfile.
1369         (msymbol_hash_iw, msymbol_hash, add_minsym_to_hash_table): New
1370         functions.
1371         (prim_record_minimal_symbol_and_info): Initialize the
1372         hash link fields of the new minimal symbol.
1373         * symtab.h (struct minimal_symbol): New fields `hash_next',
1374         `demangled_hash_next'.
1375         (msymbol_hash_iw, msymbol_hash, add_minsym_to_hash_table): Declare.
1376         * objfiles.h (MINIMAL_SYMBOL_HASH_SIZE): New define.
1377         (struct objfile): New fields `msymbol_hash',
1378         `msymbol_demangled_hash'.
1379
1380 2000-03-06  Jim Blandy  <jimb@redhat.com>
1381
1382         * solib.c (first_link_map_member): Doc fix.
1383
1384 2000-03-06  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
1385
1386         From  Eli Zaretskii  <eliz@is.elta.co.il>:
1387
1388         * event-loop.c (poll_timers): Don't compare delta.tv_sec with
1389         zero, since time_t might be unsigned.
1390
1391 2000-03-06  Mark Kettenis  <kettenis@gnu.org>
1392
1393         * i386-linux-nat.c (supply_fpregset): Mask off the reserved bits
1394         in *FPREGSETP.
1395         (convert_to_fpregset): Don't touch the reserved bits in *FPREGSETP.
1396
1397 2000-03-05  Mark Kettenis  <kettenis@gnu.org>
1398
1399         Allow GDB to run on Linux 2.0 again.
1400         * config.in: Add HAVE_PTRACE_GETREGS.
1401         * configure.in: Check if <sys/ptrace.h> defines PTRACE_GETREGS.
1402         * configure: Regenerated.
1403         * config/i386/nm-linux.h (CANNOT_FETCH_REGISTER,
1404         CANNOT_STORE_REGISTER): New defines.
1405         * i386-linux-nat.c (have_ptrace_getregs): New variable.
1406         (PTRACE_XFER_TYPE, CANNOT_FETCH_REGISTER, fetch_register,
1407         old_fetch_inferior_registers, CANNOT_STORE_REGISTER,
1408         store_register, old_store_inferior_registers): Copied over from
1409         `inptrace.c' as a temporary measure.
1410         (fetch_regs, store_regs, fetch_fpregs, store_fpregs):
1411         Conditionalize on HAVE_PTRACE_GETREGS.  Define stubs if
1412         HAVE_PTRACE_GETREGS isn't defined.
1413         (fetch_regs): Reset `have_ptrace_getregs' if ptrace call fails
1414         with EIO.
1415         (fetch_inferior_registers, store_inferior_registers): Fall back on
1416         the method use in `infptrace.c' (by calling
1417         old_fetch_inferior_registers and old_store_inferior_registers) if
1418         `have_ptrace_getregs' isn't set.
1419
1420 2000-03-05  Mark Kettenis  <kettenis@gnu.org>
1421
1422         * i386-linux-nat.c: Use elf_gregset_t and elf_fpregset_t instead
1423         of gregset_t and fpregset_t.  Those are the only names that are
1424         guaranteed to specify the right types for all supported Linux
1425         systems out there.
1426         Various doc fixes and gratitious local variable renames, all in an
1427         attempt to stress similarities between the code and unify the
1428         terminology used.  Use ISO-C all over.
1429         (regmap): Remove trailing comma.
1430         (FPREG_ADDR): Renamed from FPREGSET_T_FPREG_ADDR.
1431         (convert_to_gregset): Make static.  Remove GDB_REGS argument.  It
1432         is unnecessary and wasn't used anyway.  All callers changed.
1433         (convert_to_fpregset, convert_to_xfpregset): Likewise.
1434         (fetch_regs, store_regs): Remove unused variable `regno'.
1435         (fill_fpregs): If REGNO is not -1, only update the specified
1436         register.
1437         (fetch_core_registers): Renamed from
1438         i386_linux_fetch_core_registers.  There is no need for a unique
1439         name since the function is static anyway.
1440         (linux_elf_core_fns): Renamed from i386_linux_nat_core_functions
1441         since it is more descriptive.
1442
1443 Sun Mar  5 19:40:27 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1444
1445         * MAINTAINERS (readline/): Expand to include host maintainers.
1446
1447 2000-03-04  Mark Kettenis  <kettenis@gnu.org>
1448
1449         Fix support for Linux/i386 signal trampolines.  The old approach
1450         didn't work for Linux 2.2 and beyond, and didn't work with recent
1451         versions of the GNU C library.
1452         * i386-tdep.c (LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
1453         LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1): New defines.
1454         (linux_rt_sigtramp_code): New variable.
1455         (LINUX_RT_SIGTRAMP_LEN): New define.
1456         (i386_linux_rt_sigtramp_start): New function.  Detect start of
1457         signal trampolines for RT signals.
1458         (i386_linux_sigtramp): Removed.
1459         (i386_linux_in_sigtramp): New function.
1460         (i386_linux_sigcontext_addr): New function.  Recognize the names
1461         of the signal tranmpolines used by recent versions of the GNU C
1462         library, and add support for RT signals.
1463         (LINUX_SIGCONTEXT_PC_OFFSET, LINUX_SIGCONTEXT_SP_OFFSET):  New
1464         defines.  Moved here from config/i386/tm-linux.h.
1465         (i386_linux_sigtramp_saved_pc, i386_linux_sigtramp_saved_sp):
1466         Reimplement in terms of i386_linux_sigcontext_addr.
1467         * config/i386/tm-linux.h (LINUX_SIGCONTEXT_SIZE): Removed.
1468         (LINUX_SIGCONTEXT_PC_OFFSET, LINUX_SIGCONTEXT_SP_OFFSET):
1469         Moved to i386-tdep.c.
1470         (IN_SIGTRAMP): Redefine to call i386_linux_in_sigtramp.
1471
1472 Sat Mar  4 19:38:11 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1473
1474         By: Sat Mar 4 04:08:58 2000 Alexandre Oliva <oliva@lsd.ic.unicamp.br>
1475         * Makefile.in (all-gdbtk): Fix $srcdir to ${srcdir}.
1476
1477 Sat Mar  4 17:23:06 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1478
1479         * MAINTAINERS: Frank Ch. Eigler and Andrew Cagney co-ordinate the
1480         sim directory.
1481
1482 Sat Mar  4 16:19:31 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1483
1484         * MAINTAINERS: Add Michael Snyder and Peter Schauer to list of
1485         ``Blanket Write Privs'' maintainers.
1486
1487 Sat Mar  4 15:58:40 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1488
1489         From Sun 20 Feb 2000 Robert Lipe <robertl@sco.com>:
1490         * language.c (longest_local_hex_string_custom): Don't compile
1491         'long long' section if host doesn't have 'long long'.
1492
1493 Sat Mar  4 15:45:38 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1494
1495         * language.c (longest_raw_hex_string): Comment out.  Appears
1496         unused.
1497
1498 Sat Mar  4 13:02:09 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1499
1500         * utils.c (mcalloc), defs.h (mcalloc): Keep consistent with
1501         "mmalloc.h" which means using PTRs.
1502         (init_malloc, msavestring, mstrsave): Convert to PTR free ISO-C.
1503
1504 Sat Mar  4 11:49:21 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1505
1506         * defs.h (store_address, store_unsigned_integer, store_address):
1507         Replace PTR with void* in delcaration.
1508         * findvar.c (extract_signed_integer, extract_unsigned_integer,
1509         extract_long_unsigned_integer, extract_address,
1510         store_signed_integer, store_unsigned_integer, store_address):
1511         Convert definition to ISO-C.  Replace PTR with void*.
1512
1513 Sat Mar  4 10:57:25 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1514
1515         * defs.h (make_cleanup_func): Document as deprecated.
1516         (make_cleanup_ftype): New typedef.  Make signature consistent with
1517         other function typedefs.  Document as not be used out side of
1518         make_cleanup code. Use in make_cleanup declarations.
1519         (null_cleanup): Replace PTR with void*.
1520         
1521         * utils.c (make_cleanup, make_final_cleanup, make_run_cleanup,
1522         make_exec_cleanup, make_exec_error_cleanup, make_my_cleanup,
1523         null_cleanup): Change K&R definition to ISO-C using void* and
1524         make_cleanup_fytpe.
1525         (discard_my_cleanups): Don't cast argument to free.
1526
1527 2000-03-03  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
1528
1529         * defs.h (struct continuation_arg): Change type of field 'data'
1530         from PTR to void *.
1531
1532         * event-loop.h: Eliminate uses of PTR, use 'void *' instead.
1533
1534         * event-top.c: Ditto.
1535
1536 Fri Mar  3 15:39:34 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1537
1538         * Makefile.in (CONFIG_CLEAN, CONFIG_ALL, LN_S): Defined by
1539         configure.
1540         (SUBDIR_MI_CLEAN, SUBDIR_GDBTK_CLEAN, SUBDIR_MI_ALL,
1541         SUBDIR_GDBTK_ALL): Define.
1542         (all-gdbtk, clean-gdbtk): New targets.
1543         (all): Add CONFIG_ALL as dependency.
1544         (clean): Add CONFIG_CLEAN as dependency.
1545         
1546         * configure.in (CONFIG_ALL, CONFIG_CLEAN): Define.
1547         (LN_S): Define.  Delete GDBtk's link code.
1548
1549 Fri Mar  3 13:12:34 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1550
1551         * configure.in (ENABLE_GDBTK): Delete variable.
1552         (enable-gdbtk): Only enable gdbtk when there is a GDBTK directory.
1553         * Makefile.in: Update.
1554         * configure: Regenerate
1555
1556 2000-03-02  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
1557
1558         * config/alpha/alpha-linux.mh: Remove core-regset.o fron the
1559         NATDEPFILES list.
1560
1561 2000-03-02  Mark Kettenis  <kettenis@gnu.org>
1562
1563         * config/i386/tm-i386aix.h (NUM_FPREGS, NUM_REGS, REGISTER_BYTES):
1564         Override definitions to include the normal FPU registers.
1565         (REGISTER_CONVERTIBLE, REGISTER_CONVERT_TO_VIRTUAL,
1566         REGISTER_CONVERT_TO_RAW): Removed.  The default definitions are
1567         fine for AIX/i386.
1568         (i387_to_double, double_to_i387): Remove prototypes.
1569
1570 2000-03-02  Kevin Buettner  <kevinb@redhat.com>
1571
1572         * findvar.c (extract_floating, store_floating): Use target
1573         floating point type sizes rather host sizes to determine
1574         which conversion needs to be done.
1575
1576 2000-03-02  Nick Duffek  <nsd@cygnus.com>
1577
1578         * uw-thread.c: Apply GNU conventions to comment formatting.
1579         (deactivate_uw_thread): Call remove_thread_event_breakpoints().
1580         (uw_thread_mourn_inferior): Move remove_thread_event_breakpoints()
1581         call to deactivate_uw_thread().
1582
1583 Thu Mar  2 09:04:46 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1584
1585         * MAINTAINERS: Daniel Berlin is C++ maintainer.         
1586
1587 Thu Mar  2 08:55:35 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1588
1589         * MAINTAINERS: Mark Kettenis is the x86 architcture maintainer and
1590         a joint GNU/Linux/x86 maintainer.  Nick Duffeck and Robert Lipe
1591         share SCO/Unixware.  Nick Duffek and Peter Schauer share
1592         Solaris/x86.
1593
1594 Wed Mar  1 22:12:35 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1595         
1596         From Wed 23 Feb 2000 Fernando Nasser <fnasser@redhat.com>:
1597         * remote-sim.c (gdbsim_close): Call generic_mourn_inferior.
1598         * remote-rdi.c (arm_rdi_close): Ditto. 
1599
1600 Wed Mar  1 19:31:32 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1601
1602         * CONTRIBUTE (configure.in): Note that patches to configure are
1603         not needed.
1604
1605 2000-03-01  Mark Kettenis  <kettenis@gnu.org>
1606
1607         * MAINTAINERS: Correct my own mail address.
1608
1609 Wed Mar  1 11:26:07 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1610
1611         * MAINTAINERS: Document people with paperwork pending.
1612
1613 Wed Mar  1 00:49:06 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1614
1615         From 2000-02-28 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
1616         Make NEW_PROC_ABI interface functional on Solaris x86.
1617         * sol-thread.c (ps_lgetLDT): Rewrite to use new
1618         procfs_find_LDT_entry function from procfs.c, mostly copied from
1619         lin-thread.c.
1620         * inferior.h, procfs.c (procfs_get_pid_fd): Removed, no longer
1621         needed.
1622
1623 Wed Mar  1 00:34:55 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1624
1625         From 2000-02-26 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
1626         * config/i386/tm-i386sol2.h (MERGEPID): Define.
1627
1628 Wed Mar  1 00:06:19 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1629
1630         From 1999-08-13 J.T. Conklin <jtc@redback.com>:
1631         * config/i386/tm-i386.h (FRAME_INIT_SAVED_REGS): Replace
1632         FRAME_FIND_SAVED_REGS.
1633         (i386_frame_init_saved_regs): Replace i386_frame_find_saved_regs.
1634         * i386-tdep.c (i386_frame_init_saved_regs, i386_pop_frame):
1635         Update.
1636
1637 Tue Feb 29 23:56:41 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1638
1639         From 2000-02-23 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
1640         * objfiles.c (open_mapped_file):  Fix obsolete references to `mapped'
1641         parameter.
1642
1643 Tue Feb 29 18:47:58 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1644
1645         From 2000-02-23 Eli Zaretskii <eliz@is.elta.co.il>:
1646         * config/i386/nm-go32.h (FLOAT_INFO): Remove macro definition.
1647         (top level): Add prototypes for go32_* functions.
1648         * config/i386/tm-go32.h (I386_DJGPP_TARGET): Define.
1649         (FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC):
1650         Override definitions from tm-i386.h.
1651         (REGISTER_VIRTUAL_TYPE): Remove macro definition.
1652         * i386-tdep.c (i386_extract_return_value)
1653         [I386_AIX_TARGET || I386_GNULINUX_TARGET]: Add I386_DJGPP_TARGET
1654         to the list of targets which return FP values in FP registers.
1655
1656         * i386-tdep.c (i386_extract_return_value): Add FIXME recommending
1657         that this function be re-implemented using multi-arch.
1658
1659 Tue Feb 29 18:40:08 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1660
1661         From 2000-02-23 Eli Zaretskii <eliz@is.elta.co.il>:
1662         * utils.c [__GO32__]: Include pc.h, for prototypes of ScreenCols
1663         and ScreenRows.
1664         * ser-go32.c: Include string.h, for prototype of strncasecmp.
1665         (dpmi_regs, dpmi_sregs): Remove unused variables.
1666         (dos_flush_input): Return a value, to prevent compiler warning.
1667         * expprint.c (dump_prefix_expression): Use %ld in format and cast
1668         sizeof(union exp_element) to long, to prevent GCC from complaining
1669         about format/argument mismatch.
1670         (dump_postfix_expression): Likewise.
1671
1672 Tue Feb 29 18:09:46 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1673
1674         * arm-tdep.c: Include <ctype.h>.
1675
1676 Tue Feb 29 17:33:49 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1677
1678         From Wed, 23 Feb 2000 Fernando Nasser <fnasser@redhat.com>:
1679         * stack.c (backtrace_command_1), infrun.c (normal_stop): Check
1680         that the target's stack was valid.
1681
1682 Tue Feb 29 15:14:56 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1683
1684         From 2000-02-22 Stephane Carrez <stcarrez@worldnet.fr>:
1685         * dwarf2read.c (read_address): Read 16-bits addresses.
1686
1687 2000-02-28  Scott Bambrough <scottb@netwinder.org>
1688
1689         * arm-linux-nat.c (fetch_nw_fpe_*):
1690         Renamed to fetch_nwfpe_* to use the same naming convention
1691         as in the Linux kernel.  Modified prototype to get rid of
1692         unused parameters.
1693         (store_nw_fpe_*): Renamed to store_nwfpe_* to use the same
1694         naming convention as in the Linux kernel.  Fixed calls to 
1695         fetch_nwfpe_*.
1696         (store_fpregs): Fixed calls to store_nwfpe_*.  Removed
1697         unused variable. 
1698
1699 Mon Feb 28 18:24:32 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1700
1701         * MAINTAINERS: Transfer d30v maintainership to David Taylor.
1702
1703 2000-02-28  Christopher Faylor  <cgf@cygnus.com>
1704
1705         * win32-nat.c: Remove unneeded header.
1706         * wince.c: Ditto.
1707
1708 Mon Feb 28 13:34:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1709
1710         * wince.c: Include "gdb_wait.h" and not "wait.h".
1711
1712 Mon Feb 28 10:58:45 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1713
1714         * MAINTAINERS: Mention mmalloc.  Expand Host/Native and
1715         Target/Architecture maintainers descriptions.
1716
1717 2000-02-26  Mark Kettenis  <kettenis@gnu.org>
1718
1719         * gnu-nat.c: Include "gdbthread.h".  Include <hurd.h>.
1720         Reorder headers a bit.  Overall cleanup and minor reformatting.
1721         (MIG_SERVER_DIED): Remove define.
1722         (proc_update_sc): Add braces to silence compiler warning.
1723         (proc_steal_exc_port): Initialize err to zero.
1724         (make_proc): Add braces to silence compiler warning.
1725         (inf_validate_task_sc): Add cast to silence compiler warning.
1726         (inf_set_traced): Reorganize a bit to silence compiler warning.
1727         (inf_validate_procs): Use mach_msg_type_number_t for all thread
1728         numbers and add braces to silence compiler warning.
1729         (gnu_wait): Add prototypes for server functions and add braces to
1730         silence compiler warnings.
1731         (S_exception_raise_request): Pass subcode to inf_debug call.
1732         (gnu_write_inferior): Remove unused variable `protection_changed'.
1733         (gnu_xfer_memory): Remove unused variable `result'.
1734         (set_sig_thread_cmd): Remove unused varible `tid'.
1735         (set_signals_cmd): Remve unused variable `trace'.
1736         (add_task_commands): Provide complete prototype.  Reformat help
1737         strings a bit to make sure the first line is a full sentence.
1738         Call info_port_rights_cmd instead of info_send_rights_cmd for the
1739         "info port-rights" command.
1740         (add_thread_commands): Provide complete prototype.  Make static.
1741         Reformat help strings a bit to make sure the first line is a full
1742         sentence.
1743         (_initialize_gnu_nat): Provide complete prototype.
1744
1745 2000-02-26  Mark Kettenis  <kettenis@gnu.org>
1746
1747         Make cross-compilation for the Hurd more friendly.
1748         From Jeff Bailey <jbailey@gnu.org>:
1749         * configure.in: Use AC_CHECK_TOOL to find MiG.
1750         * Makefile.in (MIG): New variable.
1751         * config/i386/i386gnu.mh (MIG): Remove.
1752         * configure: Regenerated.
1753
1754 2000-02-26  Kevin Buettner  <kevinb@redhat.com>
1755
1756         * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Add
1757         comment explaining motivation behind this function and why
1758         the generic facilities won't work for this platform.
1759         * rs6000-tdep.c (skip_prologue): Always test to make sure
1760         that an instruction is read successfully from the target's
1761         memory.  Introduce notion of instructions which may appear in
1762         the prologue, but may not end the prologue.  Added explicit
1763         check for nop instruction.  Use memset() to zero the frame
1764         data instead of assignment from a statically allocated,
1765         uninitialized structure.
1766
1767 Sat Feb 26 17:15:16 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1768
1769         * MAINTAINERS: Chris Faylor is responsible for all MS Windows
1770         systems.  Note that Jim Blandy as maintainer for ``tracing
1771         bytecode stuff''
1772
1773 2000-02-25  Fernando Nasser  <fnasser@cygnus.com>
1774
1775         From: Thomas Zenker <thz@Lennartz-electronic.DE>
1776         * rdi-share/hsys.c: to compile under 4.4BSD derived systems (FreeBSD,
1777         NetBSD...) sys_errlist should not be declared in hsys.c.
1778         NEED_SYSERRLIST is set already by configure, so we can use it.
1779         * rdi-share/unixcomm.c: 4.4BSD derived systems define BSD, but are
1780         posix compliant and we should not work with the old compatibility
1781         stuff.  Because of that I undef BSD in case of FBSD etc and include
1782         sys/ioctl to get the flags.
1783         * rdi-share/unixcomm.c: If the TIOCEXCL flags exists set serial line
1784         for exclusive use.
1785
1786 2000-02-24  Kevin Buettner  <kevinb@redhat.com>
1787
1788         * ppc-linux-tdep.c (ppc_sysv_abi_push_arguments): Put address
1789         of return structure in r3 if necessary.
1790         (ppc_linux_memory_remove_breakpoints): New function.
1791         * rs6000-tdep.c (skip_prologue): Make sure that the cases
1792         for storing either cr or lr to the stack only handle those
1793         cases.  (I.e, don't let these cases match 0x00000000 which is
1794         found found in the shared library trampoline prior to the
1795         loading of the shared library.)
1796         * config/powerpc/tm-linux.h (ppc_linux_memory_remove_breakpoint):
1797         Declare.
1798         (MEMORY_REMOVE_BREAKPOINT): Define.
1799
1800 Wed Feb 23 23:27:48 2000  Andrew Cagney  <cagney@behemoth.cygnus.com>
1801
1802         * hppah-nat.c: Include "gdb_wait.h" instead of <wait.h>.
1803
1804 Thu Feb 24 18:42:15 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1805
1806         * configure.in (CONFIG_INSTALL, CONFIG_UNINSTALL): Set to
1807         $(SUBDIR_*_INSTALL) when so configured.
1808         * configure: Regenerate.
1809         
1810         * Makefile.in (CONFIG_INSTALL, CONFIG_UNINSTALL): Define using
1811         configure.
1812         (install-only): Add dependency on $(CONFIG_INSTALL).  Delete code
1813         installing GDBtk.
1814         (uninstall): Add dependency on $(CONFIG_UNINSTALL).
1815         (SUBDIR_MI_INSTALL, SUBDIR_MI_UNINSTALL, SUBDIR_GDBTK_UNINSTALL,
1816         SUBDIR_GDBTK_INSTALL): Define.
1817         (install-gdbtk): New target.
1818
1819 Thu Feb 24 18:19:52 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1820
1821         * configure.in (SUBDIR_MI_CFLAGS): Fix typo, wrong brace.
1822         * configure: Regenerate.
1823         
1824 2000-02-24  Christopher Faylor  <cgf@cygnus.com>
1825
1826         * configure.tgt: Add arm, mips, sh wince targets.
1827         * config/arm/tm-wince.h: New file.
1828         * config/arm/wince.mt: New file.
1829         * config/sh/tm-wince.h: New file.
1830         * config/sh/wince.mt: New file.
1831         * config/mips/tm-wince.h: New file.
1832         * config/mips/wince.mt: New file.
1833         * wince.c: New file.
1834         * wince-stub.c: New file.
1835         * wince-stub.h: New file.
1836         * sh-tdep.c: Use correct register names for Windows CE.
1837
1838 Wed Feb 23 19:01:45 EST 2000  Nicholas Duffek <nsd@cygnus.com>
1839
1840         * top.c (SIGJMP_BUF, SIGSETJMP, SIGLONGJMP): Update comments.
1841         (error_return, quit_return): Merge into catch_return pointer.
1842         (return_to_top_level): Update comment.  Longjmp to *catch_errors,
1843         and communicate reason to catch_errors via setjmp return value.
1844         (catch_errors): Always catch both quit and error, and if a catch
1845         wasn't requested by caller, throw it to the next catch_error.
1846         Replace dual longjmp buffer memcpy with single pointer change.
1847         Add FIXME for possibly adding new interface to tell caller what
1848         event was caught.  Add extensive comments.
1849         * defs.h (enum return_reason): Reserve 0 for use as initial
1850         setjmp() return value.
1851         (RETURN_MASK): New public macro to generate RETURN_MASK_* from
1852         enum return_reason.
1853         (RETURN_MASK_QUIT, RETURN_MASK_ERROR): Define using RETURN_MASK.
1854
1855 2000-02-23  Fernando Nasser  <fnasser@cygnus.com>
1856
1857         * infcmd.c (run_stack_dummy): Do not pop frame on random signal.
1858         * valops.c (_initialize_valops): Add command "set unwindonsignal".
1859         (hand_function_call): Test for unwind_on_signal and act accordingly.
1860
1861 Wed Feb 23 12:58:46 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1862
1863         * gdbarch.sh (dis_asm_read_memory): Change LEN to unsigned long.
1864         Match ../include/dis-asm.h change.
1865         * gdbarch.h: Regenerate.
1866         * corefile.c (dis_asm_read_memory): Update.
1867
1868 Mon Feb 21 13:57:27 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1869
1870         * configure.in (CONFIG_INITS): Fix typo, was CONFIG_INIT.
1871         (ENABLE_CFLAGS): Move initialization to start of file.
1872         (enable-gdbmi): Add new configure option --enable-gdbmi.  When
1873         selected and an ${srcdir}/mi directory is present enable MI
1874         interface.
1875
1876         * configure: Regenerate.
1877         
1878         * Makefile.in (SUBDIR_MI_OBS, SUBDIR_MI_SRCS, SUBDIR_MI_DEPS,
1879         SUBDIR_MI_INITS, SUBDIR_MI_LDFLAGS, SUBDIR_MI_CFLAGS): New macros.
1880         (CONFIG_OBS, CONFIG_SRCS, CONFIG_DEPS, CONFIG_INITS,
1881         CONFIG_LDFLAGS): New macros.  Initialized by autoconf via
1882         @CONFIG...@.
1883         (INTERNAL_LDFLAGS, CDEPS, LINTFILES, DEPFILES, SOURCES,
1884         INIT_FILES): Use $(CONFIG_...) instead of @CONFIG...@.
1885
1886         * mi: New directory. MI interface to GDB.
1887
1888         * defs.h (interpreter_p): Declare when UI_OUT.
1889         * top.c (gdb_init): When interpreter_p, check that the interpreter
1890         was recognized by one of the linked in interpreters.
1891         * main.c (interpreter_p): Define.
1892         (captured_main): When UI_OUT, check for ``-i <interpreter>'' option.
1893         * event-top.c (display_gdb_prompt): When interpreter_p, assume
1894         interpreter displays prompt.
1895
1896         * breakpoint.c (print_it_typical, watchpoint_check,
1897         print_one_breakpoint, mention): When MI include additional
1898         target status information.
1899         * infrun.c (print_stop_reason, normal_stop): Ditto.
1900
1901 2000-02-22  Jim Blandy  <jimb@redhat.com>
1902
1903         * gdbarch.sh: Make the `default' field really default to zero, as
1904         documented.
1905
1906         Bring COERCE_FLOAT_TO_DOUBLE under gdbarch's control.
1907         * valops.c (COERCE_FLOAT_TO_DOUBLE): Rework definition to be
1908         more function-like.
1909         (default_coerce_float_to_double, standard_coerce_float_to_double):
1910         New functions.
1911         (value_arg_coerce): Adjust for new definition.
1912         * value.h (default_coerce_float_to_double,
1913         standard_coerce_float_to_double): New declarations for the above.
1914         * gdbarch.sh (coerce_float_to_double): New entry, replacing macro.
1915         * gdbarch.c, gdbarch.h: Regenerated.
1916         * tm-alpha.h, tm-fr30.h, tm-m32r.h, tm-mips.h, tm-hppa.h,
1917         tm-rs6000.h, tm-sh.h, tm-sparc.h (COERCE_FLOAT_TO_DOUBLE): Change
1918         definitions.
1919         * mips-tdep.c (mips_coerce_float_to_double): Supply our own custom
1920         function here.
1921         (mips_gdbarch_init): Install that as our coerce_float_to_double
1922         function.
1923
1924 2000-02-22  Kevin Buettner  <kevinb@redhat.com>
1925
1926         * ppc-linux-nat.c (supply_gregset, supply_fpregset): Add return
1927         type.
1928         * ppc-linux-tdep.c (ppc_linux_at_sigtramp_return_path): Add
1929         forward declaration.
1930
1931         * ppc-linux-tdep.c (ppc_linux_frame_saved_pc): Handle case
1932         where the next frame is a signal handler caller.
1933
1934         * config/powerpc/tm-linux.h (PUSH_ARGUMENTS): Remove extraneous
1935         undef.
1936         (tm-linux.h): Include.
1937         (tm-sysv4.h): Don't include (directly).  config/tm-linux.h will
1938         include this file for us.
1939         (REALTIME_LO, REALTIME_HI): Don't define.  These are defined by
1940         config/tm-linux.h for us.
1941         (SOFUN_ADDRESS_MAYBE_MISSING): Define.
1942
1943 2000-02-21  Kevin Buettner  <kevinb@redhat.com>
1944
1945         * Makefile.in (ppc-linux-nat.c, ppc-linux-tdep.c): New files.
1946         (ppc-linux-nat.o, ppc-linux-tdep.o): Add dependencies.
1947         * configure.tgt (powerpc-*-linux*): Separate from powerpc-*-eabi
1948         and like targets.
1949
1950         * ppc-linux-nat.c, ppc-linux-tdep.c, config/powerpc/linux.mt,
1951         config/powerpc/nm-linux.h, config/powerpc/tm-linux.h: New files.
1952         * config/powerpc/xm-linux.h: Substantially revised for native
1953         port.
1954         * config/powerpc/linux.mh (NAT_FILE): Redefine to be nm-linux.h.
1955         (NATDEPFILES): Update list to reflect the fact that we can
1956         now debug natively.
1957
1958         * rs6000-tdep.c, config/rs6000/tm-rs6000.h
1959         (rs6000_frameless_function_invocation, rs6000_frame_saved_pc):
1960         Renamed; The former names were lacking the rs6000_ prefix.
1961         * rs6000-tdep.c (rs6000_frame_saved_pc): Call FRAME_CHAIN
1962         instead of rs6000_frame_chain.
1963         (rs6000_frame_chain): Call FRAMELESS_FUNCTION_INVOCATION instead
1964         of rs6000_frameless_function_invocation.
1965
1966 2000-02-21  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
1967
1968         From Philippe De Muyter  <phdm@macqel.be>
1969
1970         * event-loop.c (handle_file_event): In case of poll, enable
1971         printing of informational message if an error/exception is
1972         detected on the file descriptor.
1973
1974 2000-02-21  Jim Kingdon  <kingdon@redhat.com>
1975
1976         * MAINTAINERS (Misc): Clarify that yes, anyone can edit web pages.
1977
1978 Mon Feb 21 12:50:57 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1979
1980         * buildsym.c: Include "language.h" and "expression.h" for
1981         longest_local_hex_string_custom.
1982
1983 Mon Feb 21 11:17:18 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1984
1985         * gdbarch.sh: Include <gdb_wait.h> instead of <wait.h>.
1986         * gdbarch.c: Already updated by Wed Feb 9 18:59:16 2000 Andrew
1987         Cagney <cagney@b1.cygnus.com>.
1988
1989 Mon Feb 21 11:03:01 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1990
1991         * MAINTAINERS: Update: IA-64 - Kevin Buettner; ARM - Fernando
1992         nasser, Jim Ingham and Scott Bambrough; GNU/Linux ARM - Scott
1993         Bambrough; event loop - Elena Zannoni; SDS and RDI/APD protocol -
1994         to Fernando Nasser and Jim Ingham; KOD - Fernando Nasser; MI -
1995         Andrew Cagney, Elena Zannoni and Fernando Nasser; Web pages - Jim
1996         Kingdon.
1997         * MAINTAINERS: Add Nick Clifton to write after approval list.
1998         
1999 Mon Feb 21 10:30:39 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2000
2001         * MAINTAINERS: Add note on multiple maintainers.
2002
2003 2000-02-19  Philippe De Muyter  <phdm@macqel.be>
2004
2005         * cli-out.c (cli_table_header): Type of parameter `alignment' is
2006         `enum ui_align', not `int'.
2007         (cli_field_string, cli_field_skip): Likewise.
2008
2009 2000-02-18  Jim Blandy  <jimb@redhat.com>
2010
2011         From Jimmy Guo <guo@cup.hp.com>:
2012         * buildsym.h (add_free_pendings): Declare.
2013         * buildsym.c (add_free_pendings): New function.
2014         (make_blockvector): 32x64 fix using longest_local_hex_string().
2015         (start_subfile): initialize variable 'subfile'.
2016
2017 2000-02-18  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
2018
2019         * remote.c (remote_async_detach): Use target_mourn_inferior(), to
2020         make sure that all is cleaned up after we disconnect from the
2021         target.
2022         (remote_detach): Ditto.
2023
2024 2000-02-17  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2025
2026         From Rodney Brown  <RodneyBrown@pmsc.com>
2027         * ui-out.c (ui_out_set_flags): Fix typo, removing warning and
2028         potentially harming mistake.
2029
2030 2000-02-17  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2031
2032         * arm-tdep.c: Use header file instead of extern declarations for
2033         the {get,set}_arm_regname* functions.
2034
2035 2000-02-16  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2036
2037         * configure.in: Replaces obsolete gdbtk-variable.c with
2038         gdbtk-varobj.c.
2039         * configure: Regenerate.
2040         * Makefile.in: Remove obsolete/extraneous references to
2041         gdbtk-var* files.
2042
2043 2000-02-16  Mark Kettenis  <kettenis@gnu.org>
2044
2045         * target.c (do_target_signal_to_host): Do not use REALTIME_LO in
2046         the conversion of the signal number.  TARGET_SIGNAL_REALTIME_33 is
2047         33 by definition, whereas REALTIME_LO might be 32 on systems that
2048         have SIG32 such as Linux.  Make sure that the signal number
2049         returned is within the range specified by REALTIME_LO and
2050         REALTIME_HI.
2051
2052 2000-02-16  Mark Kettenis  <kettenis@gnu.org>
2053
2054         * configure: Regenerated.
2055
2056 2000-02-16  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2057
2058         * arm-tdep.c (set_disassembly_flavor, arm_othernames,
2059         _initialize_arm_tdep): Allows the user to choose between any of
2060         the flavors available for the disassembly to be used in the "info
2061         reg" command and elsewhere in gdb.  It prevents having to maintain
2062         this information in two places by using the data kept in the
2063         opcodes directory.
2064
2065 2000-02-09  Mark Kettenis  <kettenis@gnu.org>
2066
2067         * configure.in: Check for lwpid_t, psaddr_t, prgregset_t and
2068         prfpregset_t in <sys/procfs.h>.
2069         * config.in: Add HAVE_LWPID_T, HAVE_PSADDR_T, HAVE_PRGREGSET_T,
2070         HAVE_PRFPREGSET_T.
2071         * gdb_proc_service.h: Only provide typedefs for lwpid_t, psaddr_t,
2072         prgregset_t and prfpregset_t if they are not already present.
2073
2074 Wed Feb 16 19:00:02 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2075
2076         From 2000-01-26 Rodney Brown <RodneyBrown@pmsc.com>:
2077         * procfs.c: Define MERGEPID if not defined. For osf4.0e.
2078
2079 2000-02-15  Jason Molenda  (jsm@bugshack.cygnus.com)
2080
2081         * Makefile.in (diststuff): Run 'diststuff' in doc/ subdir, not
2082         'do-doc'.
2083
2084 2000-02-15  Kevin Buettner  <kevinb@redhat.com>
2085
2086         Changes for AIX 4.3:
2087         * rs6000-tdep.c (rs6000_fix_call_dummy): Set TOC register
2088         to correct value for generic dummy frames.  When using
2089         generic dummy frames, don't attempt to write TOC value or
2090         function to call into the call dummy.
2091         (rs6000_push_arguments): Adapt USE_GENERIC_DUMMY_FRAMES
2092         code to also handle the PowerOpen ABI.
2093         (ppc_push_return_address): Enable for all ports.
2094         * config/powerpc/tm-ppc-aix.h (USE_GENERIC_DUMMY_FRAMES,
2095         PUSH_DUMMY_FRAME, PUSH_RETURN_ADDRESS, GET_SAVED_REGISTER, 
2096         CALL_DUMMY_BREAKPOINT_OFFSET, CALL_DUMMY_LOCATION,
2097         CALL_DUMMY_ADDRESS, CALL_DUMMY_START_OFFSET): Override defaults
2098         provided by generic RS6000 definitions so that call dummies
2099         are implemented using generic dummy frames instead.
2100
2101         * rs6000-nat.c (store_inferior_registers): Call exec_one_dummy_insn()
2102         prior to changing the stack pointer via ptrace().  Also, ignore
2103         attempts to store to undefined registers that are less than
2104         NUM_REGS.
2105
2106         * rs6000-tdep.c (DUMMY_FRAME_SIZE): Change size of the dummy
2107         frame from 436 to 448 to account for alignment padding.
2108         (rs6000_push_arguments): Obtain actual register size instead
2109         of assuming the register is 4 bytes long.  [There's still
2110         more work to be done to totally remove the 4 byte assumption,
2111         however.]  Make sure the stack is 16 byte aligned as required
2112         by the PowerOpen ABI.  Also, make sure that small structures
2113         passed in registers are properly aligned within the register.
2114
2115 2000-02-15  Jesper Skov  <jskov@cygnus.co.uk>
2116
2117         Patch applied by Kevin Buettner <kevinb@redhat.com>
2118         
2119         * rs6000-tdep.c (skip_prologue): skip copying of argument
2120         registers to local variable registers.
2121
2122 2000-02-14  Jim Kingdon  <kingdon@redhat.com>
2123
2124         * elfread.c (elf_symtab_read): Revert changes by Amit S. Kale.  A
2125         sym->section->index number is not a SECT_OFF_* code.
2126
2127 Tue Feb 15 12:07:30 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2128
2129         * MAINTAINERS (write after approval): Add H.J. Lu.
2130
2131 2000-02-14  Nick Clifton  <nickc@cygnus.com>
2132
2133         * sh-tdep.c: Remove extraneous code.
2134
2135 2000-02-14  Amit S. Kale  <akale@veritas.com>
2136
2137         * elfread.c (elf_symtab_read): Move the use of sym to after where
2138         it is set.
2139         Checked in by Jim Kingdon  <kingdon@redhat.com>
2140
2141 Mon Feb 14 15:39:01 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2142
2143         * MAINTAINERS: Make Nick Duffek the UnixWare threads maintainer.
2144
2145 Mon Feb 14 15:20:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2146
2147         From 1999-11-24 Jason Merrill <jason@casey.cygnus.com>:
2148         * dwarf2read.c: (die_is_declaration): New fn.
2149         (read_structure_scope): Use it.
2150
2151         * dwarf2read.c: (die_is_declaration): Convert to ISO-C.
2152
2153 2000-02-10  J.T. Conklin  <jtc@redback.com>
2154
2155         * config/i386/nbsd.mt (GDBSERVER_DEPFILES): Add low-nbsd.o
2156         * configure.tgt (i[3456]86-*-netbsd*): add gdbserver to
2157         configdirs.
2158         * gdbserver/low-nbsd.c: New file.
2159         
2160         * gdbserver/Makefile.in: convert to autoconf.
2161         * gdbserver/configure.in: likewise.
2162         * gdbserver/configure: generate.
2163
2164 Sun Feb 13 11:21:00 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2165
2166         * CONTRIBUTE: New file.  How to contribute to GDB.
2167
2168 Sun Feb 13 10:34:48 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2169
2170         * MAINTAINERS: Add Eli Zaretskii to djgpp maintiners.  Add Kevin
2171         Buettner to powerpc maintainers.  Make Kevin Buettner the
2172         GNU/LINUX PPC native maintainer.  Add J.T. Conklin, Jim Kingdon
2173         and Jason Molenda to write after aproval list.
2174
2175 Sun Feb 13 10:18:44 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2176
2177         * MAINTAINERS: Reformat.  Separate into check-in categories.
2178
2179 Sat Feb 12 01:08:21 EST 2000  Nicholas Duffek <nsd@cygnus.com>
2180
2181         * uw-thread.c: Remove __FUNCTION__ GNUism.
2182
2183 2000-01-17  Amit S. Kale  <akale@veritas.com>
2184
2185         * elfread.c (elf_symtab_read): Use offset for the section in which a
2186         symbol resides, instead of .text section for calculating address of a
2187         symbol.
2188         Checked in by Jim Kingdon  <kingdon@redhat.com>
2189
2190 2000-02-10  Mark Kettenis  <kettenis@gnu.org>
2191
2192         * gnu-nat.c: Remove hackery to include <bits/waitflags.h>.  It is
2193         no longer necessary now we have gdb_wait.h.
2194
2195 2000-02-09  Mark Kettenis  <kettenis@gnu.org>
2196
2197         * gnu-nat.c (proc_string): Make global.
2198         (do_mach_notify_dead_name): Suppress dead name notifications if we
2199         know that the task is dead.
2200
2201 1999-12-13  Mark Kettenis  <kettenis@gnu.org>
2202
2203         * gnu-nat.c (inf_validate_task_sc): Get task info via proc server
2204         instead of directly from the kernel.  Add some hackery to make
2205         sure that the info isn't influenced by suspension of the task in
2206         the proc server itself.
2207
2208 2000-02-10  Jim Kingdon  <kingdon@redhat.com>
2209
2210         * defs.h (MERGEPID): Added.  Patch submitted by Andrew Hobson and
2211         approved by Michael Snyder.
2212
2213 2000-02-09  Mark Kettenis  <kettenis@gnu.org>
2214
2215         * linux-thread.c: Include defs.h before gdb_wait.h.
2216
2217 Wed Feb  9 18:59:16 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2218
2219         * Makefile.in (wait_h): Delete macro.  Update all dependencies
2220         specifying gdb_wait.h instead.
2221
2222         * ser-unix.c, ser-pipe.c, remote.c, remote-udi.c, remote-sds.c,
2223         remote-os9k.c, remote-es.c, remote-rdp.c, remote-vx960.c,
2224         remote-vx.c, remote-st.c, remote-nindy.c, remote-mm.c,
2225         convex-xdep.c, convex-tdep.c, target.c, win32-nat.c, standalone.c,
2226         remote-vxmips.c, remote-vxsparc.c, remote-vx68.c, remote-vx29k.c,
2227         remote-sim.c, remote-rdi.c, remote-mips.c, remote-eb.c,
2228         remote-e7000.c, remote-bug.c, remote-array.c, remote-adapt.c,
2229         ppc-bdm.c, ocd.c, monitor.c, m3-nat.c, linux-thread.c,
2230         infttrace.c, lin-thread.c, infptrace.c, gnu-nat.c, gdbarch.c,
2231         fork-child.c, command.c: Include "gdb_wait.h" instead of <wait.h>
2232         or <sys/wait.h>.
2233         * nindy-share/nindy.c, nindy-share/Onindy.c: Ditto.
2234
2235         * gdb_wait.h: New file.  Based on ../include/wait.h. Include
2236         <sys/wait.h> or <wait.h> and then define any missing WIF macros.
2237
2238 Wed Feb  9 01:14:54 2000  Andrew Cagney  <cagney@amy.cygnus.com>
2239
2240         * config/d10v/tm-d10v.h (NO_EXTRA_ALIGNMENT_NEEDED): Define.
2241         * config/d10v/tm-d10v.h (STACK_ALIGN): Define.
2242         (d10v_stack_align): Declare.
2243         * d10v-tdep.c (d10v_stack_align): Define.
2244
2245 1999-08-23  J.T. Conklin  <jtc@redback.com>
2246
2247         * top.c (remote_timeout): Change default to 2.  Add comment
2248         explaining history of changes to the default value.
2249         * remote.c (_initialize_remote): Remove code that adds set/
2250         show remotetimeout, as that's also done in top.c
2251
2252 1999-10-18  J.T. Conklin  <jtc@redback.com>
2253
2254         * m32r-stub.c, sparcl-stub.c, sparclet-stub.c (handle_exception):
2255         Return E01 instead of P01 when 'P' command fails.
2256
2257 2000-02-05  J.T. Conklin  <jtc@redback.com>
2258
2259         * remote.c (putpkt_binary): Handle NAK from target stub.
2260
2261 2000-02-08  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
2262
2263         * configure.in: Remove the addition of sol-thread.c to the
2264         CONFIG_INITS list. This caused problems with init.c, because
2265         sol-thread.c would be grepped twice for _initialize_* functions.
2266         * configure: Ditto.
2267         * Makefile.in: Add FIXME for init.c.
2268
2269 2000-02-07  Jim Kingdon  <kingdon@redhat.com>
2270
2271         Clean up compiler warnings:
2272         * bcache.h, bcache.c, c-valprint.c, coffread.c, stabsread.c,
2273         stack.c, valprint.c: Change variables to unsigned.
2274         * bcache.c: Rearrange to avoid warnings about variables not being set.
2275         * c-lang.c, ch-lang.c, f-lang.c, m2-lang.c: Include valprint.h
2276         rather than declaring print_max and repeat_count_threashold
2277         ourselves (incorrectly).
2278         * valprint.h: Do declare repeat_count_threashold.
2279         * ch-exp.c: Use default case for internal error.
2280         * findvar.c: Don't omit argument type.
2281         * symtab.c: Remove unused variable.
2282
2283 2000-02-04  Jim Blandy  <jimb@redhat.com>
2284
2285         * c-typeprint.c (remove_qualifiers): New function.
2286         (c_type_print_base): Use it to remove qualifiers from C++
2287         qualified names, not strrchr.
2288
2289         * c-typeprint.c (c_type_print_base): Recognize type conversion
2290         operators by calling is_type_conversion_operator.
2291         (is_type_conversion_operator): New function.
2292
2293 2000-02-04  Nick Clifton  <nickc@cygnus.com>
2294
2295         * config/arm/tm-arm.h (LOWEST_PC): Define.
2296
2297 2000-02-04  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
2298
2299         * infrun.c (resume): Make just one call to target_resume(), instead
2300         of four: set up correct parameters in all the cases ahead of time,
2301         and do call at the end.
2302
2303 2000-02-04  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
2304
2305         * config/powerpc/tm-ppc-eabi.h: Define
2306         SOFUN_ADDRESS_MAYBE_MISSING.
2307
2308 2000-02-04  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2309
2310         * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy
2311         frames (revisited).
2312
2313 Fri Feb  4 22:42:36 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2314
2315         * Makefile.in (INIT_FILES): Append CONFIG_INITS
2316         * configure.in (CONFIG_INIT): Initialize.
2317         (links): Link srcdir/gdbtk/library to gdbtcl2.
2318         * gdbtcl2: Moved to gdbtk/library.
2319         ChangeLog-gdbtk, gdbtk-cmds.c, gdbtk-hooks.c, gdbtk-variable.c,
2320         gdbtk-varobj.c, gdbtk-wrapper.c, gdbtk-wrapper.h, gdbtk.c,
2321         gdbtk.h: Moved to gdbtk/generic.
2322
2323 2000-02-03  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
2324
2325         * printcmd.c (build_address_symbolic): New function. Returns all
2326         the parts that are necessary to print an address in a symbolic
2327         form.
2328         (print_address_symbolic): Split into a printing part and an
2329         information building part, build_address_symbolic().
2330
2331         * defs.h (build_address_symbolic): Export.
2332
2333 2000-02-03  Jim Blandy  <jimb@redhat.com>
2334
2335         * dwarf2read.c (decode_locdesc): Add support for the DW_OP_bregx
2336         opcode.
2337
2338 2000-02-02  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2339
2340         * arm-tdep.c (arm_push_arguments): Fix passing of floating point
2341         arguments on dummy frames.
2342
2343 2000-02-02  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2344
2345         * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy frames.
2346         (arm_pop_frame): Account fr dummy frames (as opposed to real ones).
2347
2348 2000-02-01  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
2349
2350         * remote.c (getpkt_sane): New function. It is the old getpkt(),
2351         which now returns a timeout indication.
2352         (getpkt): New function. Wrapper for getpkt_sane(), so that return
2353         value can still be ignored.
2354
2355 Tue Feb  1 18:47:31 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2356
2357         * top.c (print_gdb_version): Print ``UI_OUT'' when configured with
2358         UI_OUT.
2359
2360 Tue Feb  1 00:17:12 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2361
2362         * ui-file.c, ui-file.h: Rename gdb-file.h, gdb-file.c.  Rename
2363         ``struct gdb_file'' to ``struct ui_file''.  Delete typedef
2364         GDB_FILE.
2365         
2366         * Makefile.in: Update.
2367
2368         * ax-gdb.c, ax-general.c, ax.h, buildsym.c, c-lang.c, c-lang.h,
2369         c-typeprint.c, c-valprint.c, ch-lang.c, ch-lang.h, ch-typeprint.c,
2370         ch-valprint.c, command.c, command.h, convex-tdep.c, corefile.c,
2371         cp-valprint.c, d10v-tdep.c, d30v-tdep.c, defs.h, expprint.c,
2372         expression.h, f-lang.c, f-lang.h, f-typeprint.c, f-valprint.c,
2373         frame.h, gdb-events.sh, gdb-file.c, gdb-file.h, gdbcmd.h,
2374         gdbtypes.h, hppa-tdep.c, jv-lang.c, jv-lang.h, jv-typeprint.c,
2375         jv-valprint.c, language.c, language.h, m2-lang.c, m2-lang.h,
2376         m2-typeprint.c, m2-valprint.c, m3-nat.c, main.c, monitor.c,
2377         printcmd.c, pyr-tdep.c, remote-mips.c, remote-sim.c, remote-udi.c,
2378         remote.c, scm-lang.c, scm-lang.h, scm-valprint.c, ser-e7kpc.c,
2379         ser-go32.c, ser-mac.c, ser-ocd.c, ser-unix.c, ser-unix.h,
2380         serial.c, serial.h, stack.c, symfile.c, symmisc.c, tahoe-tdep.c,
2381         target.c, target.h, top.c, top.h, typeprint.c, typeprint.h,
2382         utils.c, v850ice.c, valprint.c, valprint.h, value.h,
2383         config/pa/tm-hppa.h: Update.
2384         * cli-out.c, cli-out.h, ui-out.c, ui-out.h, varobj.c: Update.
2385
2386 2000-01-31  Jason Molenda  (jsm@bugshack.cygnus.com)
2387
2388         * config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh,
2389         config/i386/i386dgux.mh, config/i386/i386sol2.mh,
2390         config/i386/i386v4.mh, config/i386/i386v42mp.mh,
2391         config/i386/ncr3000.mh, config/m68k/m68kv4.mh,
2392         config/m88k/delta88v4.mh, config/mips/irix4.mh,
2393         config/mips/irix5.mh, config/mips/mipsv4.mh,
2394         config/powerpc/solaris.mh (NATDEPFILES): Change references to
2395         proc_api.o, proc_events.o, proc_flags.o, and proc_why.o to
2396         proc-api.o, proc-events.o, proc-flags.o, and proc-why.o.
2397
2398 Mon Jan 31 17:14:52 2000  Andrew Cagney  <cagney@b1.cygnus.com>
2399
2400         * top.c (fputs_unfiltered_hook): Moved to tui/tui-file.c.
2401
2402         * main.c (captured_main): Only use the legacy tui_file code when
2403         linking in older code such as the TUI.
2404
2405         * gdb-file.h, gdb-file.c: New files.
2406         * utils.c, defs.h (struct gdb_file, gdb_file_new, gdb_file_delete,
2407         null_file_isatty, null_file_rewind, null_file_put,
2408         null_file_flush, null_file_write, null_file_fputs,
2409         null_file_delete, gdb_file_data, gdb_flush, gdb_file_isatty,
2410         gdb_file_rewind, gdb_file_put, gdb_file_write, fputs_unfiltered,
2411         set_gdb_file_flush, set_gdb_file_isatty, set_gdb_file_rewind,
2412         set_gdb_file_put, set_gdb_file_write, set_gdb_file_fputs,
2413         set_gdb_file_data, struct accumulated_gdb_file,
2414         do_gdb_file_xstrdup, gdb_file_xstrdup, struct mem_file):
2415         mem_file_new, mem_file_delete, mem_fileopen, mem_file_rewind,
2416         mem_file_put, mem_file_write, struct stdio_file): stdio_file_new,
2417         stdio_file_delete, stdio_file_flush, stdio_file_write,
2418         stdio_file_fputs, stdio_file_isatty, stdio_fileopen, gdb_fopen):
2419         Moved to gdb-file.h and gdb-file.c.
2420         * utils.c (enum streamtype, struct tui_stream, tui_file_new,
2421         tui_file_delete, tui_fileopen, tui_sfileopen, tui_file_isatty,
2422         tui_file_rewind, tui_file_put, tui_file_fputs,
2423         tui_file_get_strbuf, tui_file_adjust_strbuf, tui_file_flush,
2424         fputs_unfiltered_hook):
2425         Moved to tui/tui-file.c and tui/tui-file.h.
2426         
2427         * Makefile.in (COMMON_OBS): Add gdb-file.o, tui-file.o.
2428         (tui-file.o, gdb-file.o): Add dependencies.
2429         (corefile.o, main.o, utils.o, simmisc.o): Update dependencies.
2430         * main.c: #include tui/tui-file.h.
2431
2432 2000-01-28  Fred Fish  <fnf@cygnus.com>
2433
2434         * findvar.c (value_from_register): Special case handling of D10V
2435         pointer values fetched from registers.
2436
2437 2000-01-28  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2438
2439         * arm-tdep.c (thumb_skip_prologue, thumb_scan_prologue): Add
2440         support for new style thumb prologues.
2441
2442 2000-01-28  Nick Clifton  <nickc@redhat.com>
2443
2444         * arm-tdep.c: Remove extraneous dash at start of strings
2445         introduced in previous delta.
2446
2447 2000-01-27  Nick Clifton  <nickc@redhat.com>
2448
2449         * arm-tdep.c: Replace uses of arm_toggle_renames() with
2450         parse_arm_disassembler_option().
2451
2452 2000-01-27  Jim Blandy  <jimb@cygnus.com>
2453
2454         * symtab.c (decode_line_1): Don't let commas that are within
2455         quotes or parenthesis terminate the line spec.  Don't use pp when
2456         removing the final double quote of a double-quoted string.  Don't
2457         forget to skip the opening double quote.  I have no clue whether
2458         this change is correct; probably we've just moved this function
2459         from one buggy place to another buggy place, and never came within
2460         an outhouse whiff of correctness.
2461         (find_toplevel_char): New function.
2462
2463 2000-01-27  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2464
2465         * arm-tdep.c (arm_push_arguments): Set the thumb mode bit when
2466         passing the pointer to a thumb function as an argument.
2467
2468 2000-01-27  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2469
2470         * remote-rdi.c (arm_rdi_mourn_inferior): Make sure breakpoints
2471         are reinserted for another run.
2472
2473 2000-01-27  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2474
2475         * cli-out.c (cli_filed_string): Test for NULL string.
2476
2477 2000-01-27  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2478
2479         * infcmd.c (run_stack_dummy): Account for a random signal stopping
2480         the inferior as well as breakpoints being hit while performing an
2481         inferior function call.
2482         * valops.c (hand_function_call): Ditto.
2483
2484 2000-01-27  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
2485
2486         From  Mark Kettenis  <kettenis@gnu.org>
2487
2488         * config/i386/tm-i386gnu.h (THREAD_STATE_FLAVOR): Define to
2489         i386_REGS_SEGS_STATE.
2490         (HAVE_I387_REGS): Define.
2491         (FLOAT_INFO): Remove.
2492         * i386gnu-nat.c: Almost completely rewritten to use new i386
2493         register layout and `float info' implementation.
2494         * gnu-nat.c (inf_update_procs, proc_get_state, proc_string):
2495         Move prototypes from here.
2496         * gnu-nat.h: To here.
2497
2498 2000-01-24  Kevin Buettner  <kevinb@redhat.com>
2499
2500         * utils.c (get_field, put_field): Fix buffer underruns and
2501         overruns.  Also, handle case where total_len is not evenly
2502         divisible by 8.
2503         (getfield): Make sure zeroing of unwanted bits occurs even
2504         when bit field to extract does not straddle two or more
2505         bytes.
2506
2507 2000-01-23   Christopher Faylor  <cgf@cygnus.com>
2508
2509         * defs.h: Add gdb_thread_select declaration.
2510
2511 2000-01-23  Kevin Buettner  <kevinb@redhat.com>
2512
2513         * linux-thread.c (_initialize_linuxthreads): Make sure that
2514         linuxthreads_block_mask does not block SIGCHLD.
2515
2516 2000-01-20  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2517
2518         * rdi-share/devsw.c (openLogFile): On cygwin, set the log mode to
2519         text so that new lines work properly.
2520
2521 2000-01-18  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
2522
2523         * proc-utils.h: New file. Export functions from proc-*.c.
2524
2525         * proc_api.c: Rename to:
2526         * proc-api.c: New file. Add include of proc-utils.h.
2527
2528         * proc_events.c: Rename to:
2529         * proc-events.c: New file.
2530
2531         * proc_flags.c: Rename to:
2532         * proc-flags.c: New file.
2533
2534         * proc_why.c: Rename to:
2535         * proc-why.c: New file. Add include of proc-utils.h.
2536
2537         * procfs.c: Add includes of gdbthread.h, sys/wait.h, signal.h,
2538         ctype.h, proc-utils.h.
2539         (find_procinfo_or_die): Add braces to avoid ambiguous else clause.
2540         (open_procinfo_files): Conditionalize local variable tmp, to avoid
2541         compiler warnings.
2542         (proc_iterate_over_mappings): Conditionalize local vars mapfd and
2543         pathname.
2544         (procfs_wait): Adjust format in some printf_filetered calls to
2545         avoid compiler warnings.
2546         (make_signal_thread_runnable): Ifdef 0. The calls to this function
2547         are also ifdef'd 0 .
2548         (procfs_resume): Add parentheses around '&&' operation.
2549         (procfs_set_exec_trap): Remove unused variable.
2550         (info_proc_cmd): Add braces to avoid ambiguous else clause.
2551
2552         * Makefile.in (procfs.o, proc-api.o, proc-events.o, proc-flags.o,
2553         proc-why.o): Update dependencies.
2554
2555         * config/sparc/sun4sol2.mh (NATDEPFILES): Change proc_*.o files to
2556         proc-*.o.
2557
2558 2000-01-17  Jason Molenda  (jsm@bugshack.cygnus.com)
2559
2560         * configure.in (NEW_PROC_API): Fix Unixware-matching regexp.
2561         Fix from Robert Lipe <robertl@sco.com>.
2562         * configure: Regenerated.
2563
2564 2000-01-17  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
2565
2566         * stack.c (print_frame_info_base): Break up into the frame info
2567         (location) printing part and the rest (source line printing).
2568         (print_frame): New function. Take care of printing the location
2569         information.
2570         Update copyright.
2571
2572         * infrun.c (normal_stop): Use enum values rather than integers for the
2573         source_flag to be passed to show_and_print_stack_frame().
2574         Update copyright.
2575         
2576         * frame.h (print_what): New enum for 'source' argument to
2577         print_frame_info_base(). Use this instead of obscure numbers.
2578         Update copyright.
2579         
2580 Sun Jan 16 17:58:00 2000  David Taylor  <taylor@texas.cygnus.com>
2581
2582         * event-top.c (stdin_event_handler): call quit_command rather than
2583         exit -- run cleanups, give target code a chance to say goodbye to
2584         the target.  Fixes bug where the inferior processes were left
2585         around on Solaris (and probably elsewhere) by the testsuite.
2586
2587 2000-01-14  Mark Salter  <msalter@cygnus.com>
2588
2589         * v850-tdep.c (v850_target_architecture_hook): Setup correct
2590         machine id for disassembly.
2591
2592 2000-01-13  Jim Blandy  <jimb@cygnus.com>
2593
2594         * i386-linux-nat.c (fill_gregset): Pass the correct arguments to
2595         convert_to_regset, when regno indicates a specific register.
2596
2597 Thu Jan 13 23:34:17 EST 2000  Nicholas Duffek <nsd@cygnus.com>
2598
2599         * uw-thread.c: Document libthread.so debugging interface.  Minor
2600         comment and formatting tweaks.
2601         (DEBUG): #define as 0 instead of 1.
2602         (CALL_BASE): Include function name in error msg.
2603         (libthread_stub): Adjust inferior_pid after thread exit.
2604         (uw_thread_create_inferior): Deactivate uw_thread_ops before
2605         asking procfs_ops to create inferior.
2606         (libthread_init): Don't return nonlocally on error.
2607
2608 2000-01-12  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2609
2610         * rdi-share/ardi.c (negotiate_params): Fix initialization of static
2611         variable.
2612
2613 2000-01-12  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2614
2615         * remote-rdi.c (arm_rdi_open): Call arm-rdi-close() to make sure
2616         both sides are on the same state.
2617
2618 2000-01-12  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2619
2620         * rdi-share/serdrv.c (find_baud_rate): Fix entries for 57600 and
2621         115200 (minor syntax mistake).
2622
2623 2000-01-12  Jim Blandy  <jimb@cygnus.com>
2624
2625         * config/sparc/tm-sun4sol2.h (MERGEPID): Provide a definition for
2626         this here, to go along with the definitions of PIDGET and TIDGET.
2627
2628 2000-01-12  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
2629
2630         * thread.c (do_captured_thread_select): New function. Switch
2631         current thread, safely from within catch_errors().
2632         (gdb_thread_select): New function. Switch threads safely.
2633         (thread_command): Use gdb_thread_select().
2634         Include ui-out.h.
2635         (do_captured_list_thread_ids): New function.
2636         (gdb_list_thread_ids): New function.
2637
2638         * defs.h (gdb_thread_select, gdb_list_thread_ids): Export.
2639
2640 2000-01-11  Christopher Faylor <cgf@cygnus.com>
2641
2642         * configure.in: Avoid linking -limagehlp unless it's a native build.
2643         * configure: Regenerate.
2644         * thread.cc (add_thread): Clear private data pointer here or suffer
2645         strange behavior when it is checked for NULL later.
2646
2647 2000-01-09  Christopher Faylor  <cgf@cygnus.com>
2648
2649         * win32nat.c (handle_exceptions): Handle various arithmetic exceptions.
2650         * configure.in: Add an additional library to cygwin link.
2651         * configure: Regenerate.
2652
2653         Patch from Egor Duda <deo@logos-m.ru>:
2654         * coffread.c (coff_symfile_read): Reinstate ability to recognize "pe"
2655         type.
2656
2657 2000-01-07  Michael Snyder  <msnyder@cleaver.cygnus.com>
2658
2659         * uw-thread.c: New file to support UnixWare user-mode threads:
2660         contributed by Nickolas Duffek  <nsd@cygnus.com>.
2661         * target.h (struct target_ops): New vector, to_extra_thread_info,
2662         allows back-ends to give extra details in info thread display.
2663         (target_extra_thread_info): define new macro.
2664         (target_find_new_threads): simplify macro.  Cleanup comments.
2665         * target.c (to_extra_thread_info): default and inherit new vector.
2666         (cleanup_target): eliminate PARAMS, break up long lines,
2667         provide default definition for to_extra_thread_info, and
2668         to_find_new_threads.  Default to_thread_alive and to_query
2669         to return_zero, not target_ignore (they each return int not void).
2670         (debug_to_find_new_threads): new debug entry.
2671         (setup_target_debug): add debug_to_find_new_threads.
2672         * gdbthread.h: export struct thread_info, find_thread_pid, and
2673         iterate_over_threads.  Add comments.  Eliminate PARAMS.  Update
2674         copyright.  Add new private data pointer for use by target back-ends.
2675         * thread.c (struct thread_info): move definition to gdbthread.h.
2676         (find_thread_pid): new exported function for thread lookup.
2677         (iterate_over_threads): new exported function for applying
2678         arbitrary operations to threads.  Update copyright to 2000.
2679         (info_threads_command): use new target_extra_thread_info vector
2680         to display extra information about each thread (if implemented).
2681         * config/i386/tm-i386v42mp.h: remove obsolete #defines for procfs.
2682         Add defines for PIDGET, etc.
2683         * config/i386/tm-i386sol2.h: ditto.
2684         * config/sparc/tm-sun4sol2.h: ditto.
2685         * config/i386/i386v42mp.mh: add uw-thread.o to NATDEPFILES.
2686         * testsuite/gdb.threads/pthreads.exp: Try to link with -lthread
2687         if -lpthread and -lpthreads fail.
2688
2689         * procfs.c: (PIDGET, TIDGET, MERGEPID): change default to no-op.
2690         (proc_flags): combine flags that UnixWare splits into two locations.
2691         (proc_modify_flag): add support for PR_KLC (kill on last close).
2692         (proc_[un]set_kill_on_last_close): new functions.
2693         
2694 2000-01-07  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
2695
2696         * infrun.c (normal_stop): Print out thread id when we stop.
2697
2698 2000-01-06  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2699
2700         * remote.c (remote_open_1): Fix message so it does not imply a
2701         specific syntax for serial ports, as it is OS dependent.
2702         (remote_async_open_1): Ibid.
2703         (init_remote_ops): Ibid.
2704
2705 2000-01-06  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2706
2707         * rdi-share/serdrv.c (SerialOpen): Use speed from "-b" argument or
2708         "set remotebaud" command (if set) when no speed is specified on
2709         the "target rdi" command.
2710
2711 2000-01-06  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2712
2713         * rdi-share/serdrv.c (find_baud_rate): Add entries for 57600 and
2714         115200.
2715         (baud_options[]): Ibid.
2716
2717 2000-01-06  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2718
2719         * rdi-share/unixcomm.c: Fix SERIAL_PREFIX so it matches the prefix
2720         used by each operating system.
2721
2722 2000-01-06  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
2723
2724         * breakpoint.c (until_break_command): Add an argument for the
2725         continuation, the beginning of the cleanups set up by this
2726         command.
2727         (until_break_command_continuation): Do cleanups until the one
2728         passed in as argument instead of doing all of them.
2729
2730         * infcmd.c (finish_command_continuation): Expect a new argument,
2731         which indicates up to where to do cleanups. Update calls to
2732         do_exec_cleanups to use this marker, instead of ALL_CLEANUPS.
2733         (finish_command): Add another argument for the continuation: the
2734         starting cleanup for this command.
2735
2736 2000-01-05  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2737
2738         From Grant Edwards <grante@visi.com> (original patch from Thomas
2739         Zenker ):
2740         * rdi-share/ardi.c: Allow interruption of interruptible
2741         targets with a <CNTL-C>.
2742
2743 2000-01-04  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2744
2745         * rdi-share/etherdrv.c (fetch_ports): Send extra words on request
2746         to control port to accommodate some versions of Angel.
2747
2748 2000-01-04  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2749
2750         * rdi-share/devsw.c (dumpPacket): Fix source of channel information.
2751         Add interpretation for C Support Library packets.
2752
2753 2000-01-04  Fernando Nasser  <fnasser@totem.to.cygnus.com>
2754
2755         * rdi-share/devsw.c (DevSW_Close): Remove const from argument that
2756         is now being modified.
2757         * rdi-share/devsw.h: Adjust declaration of the above funtion.
2758
2759 For older changes see ChangeLog-99
2760 \f
2761 Local Variables:
2762 mode: change-log
2763 left-margin: 8
2764 fill-column: 74
2765 version-control: never
2766 End: