gdb/ChangeLog

   1 2016-06-14  John Baldwin  <jhb@FreeBSD.org>
   2
   3         * v850-tdep.c (v850_use_struct_convention): Trim type length checks.
   4
   5 2016-06-14  John Baldwin  <jhb@FreeBSD.org>
   6
   7         * tui/tui-stack.c (tui_show_frame_info): Fix type mismatch.
   8
   9 2016-06-14  John Baldwin  <jhb@FreeBSD.org>
  10
  11         * rs6000-tdep.c (ppc_process_record_op31): Initialize ra.
  12
  13 2016-06-13  Nick Clifton  <nickc@redhat.com>
  14
  15         * gdbtypes.c (replace_type): Fix assertion.
  16
  17 2016-06-10  Tom Tromey  <tom@tromey.com>
  18
  19         * gdbtypes.c (arch_type, arch_integer_type, arch_character_type)
  20         (arch_boolean_type, arch_float_type, arch_complex_type)
  21         (arch_flags_type, append_flags_type_field)
  22         (append_flags_type_flag, arch_composite_type)
  23         (append_composite_type_field_raw)
  24         (append_composite_type_field_aligned)
  25         (append_composite_type_field): Make "name" parameter const.
  26         * gdbtypes.h (arch_type, arch_integer_type, arch_character_type)
  27         (arch_boolean_type, arch_float_type, arch_complex_type)
  28         (append_composite_type_field, append_composite_type_field_aligned)
  29         (append_composite_type_field_raw, arch_flags_type)
  30         (append_flags_type_field, append_flags_type_flag): Constify.
  31
  32 2016-06-10  Tom Tromey  <tom@tromey.com>
  33
  34         PR rust/20110:
  35         * rust-exp.y (lex_number): Don't truncate large numbers to i32.
  36
  37 2016-06-10  Tom Tromey  <tom@tromey.com>
  38
  39         * Makefile.in (COMMON_OBS): Remove rust-exp.o.
  40         (YYFILES): Add rust-exp.c.
  41         (YYOBJ): Add rust-exp.o.
  42         (local-maintainer-clean): Remove rust-exp.c.
  43
  44 2016-06-09  Toshihito Kikuchi  <k.toshihito@yahoo.de>
  45
  46         * NEWS: Mention that GDB now supports a negative repeat count in
  47         the 'x' command.
  48         * printcmd.c (decode_format): Allow '-' in the parameter
  49         "string_ptr" to accept a negative repeat count.
  50         (find_instruction_backward): New function.
  51         (read_memory_backward): New function.
  52         (integer_is_zero): New function.
  53         (find_string_backward): New function.
  54         (do_examine): Use new functions to examine memory backward.
  55         (_initialize_printcmd): Mention that 'x' command supports a negative
  56         repeat count.
  57
  58 2016-06-09  Toshihito Kikuchi  <k.toshihito@yahoo.de>
  59
  60         * MAINTAINERS (Write After Approval): Add Toshihito Kikuchi.
  61
  62 2016-06-09  Tom Tromey  <tom@tromey.com>
  63
  64         PR python/19819:
  65         * python/py-xmethods.c (invoke_method_name)
  66         (py_get_result_type_method_name, py_invoke_method_name): Remove.
  67         (gdbpy_initialize_xmethods): Don't initialize
  68         py_invoke_method_name, py_get_result_type_method_name.
  69
  70 2016-06-07  Simon Marchi  <simon.marchi@ericsson.com>
  71
  72         * mi/mi-interp.c (mi_record_changed): Add missing braces.
  73
  74 2016-06-07  Bernhard Heckel  <bernhard.heckel@intel.com>
  75
  76         * findvar.c (follow_static_link): Check for valid pointer.
  77
  78 2016-06-06  Simon Marchi  <simon.marchi@ericsson.com>
  79
  80         * NEWS: Mention the new fields in =record-started.
  81         * common/btrace-common.h (btrace_format_short_string): New function
  82         declaration.
  83         * common/btrace-common.c (btrace_format_short_string): New
  84         function.
  85         * mi/mi-interp.c (mi_record_changed): Output method and format
  86         fields in the =record-started record.
  87         * record-btrace.c (record_btrace_open): Adapt record_changed
  88         notification.
  89         * record-full.c (record_full_open): Likewise.
  90         * record.c (cmd_record_stop): Likewise.
  91
  92 2016-06-02  Jon Turney  <jon.turney@dronecode.org.uk>
  93
  94         * windows-nat.c (handle_output_debug_string): Return type of
  95         gdb_signal_from_host() is gdb_signal, not an int.
  96         (windows_get_exec_module_filename): Add pointer casts for C++.
  97
  98 2016-06-02  Tom Tromey  <tom@tromey.com>
  99
 100         PR python/18984:
 101         * python/python.c (gdbpy_solib_name): Use GDB_PY_LLU_ARG.
 102
 103 2016-06-01  Pedro Alves  <palves@redhat.com>
 104
 105         * remote-fileio.c (remote_fio_ctrl_c_flag, remote_fio_sa)
 106         (remote_fio_osa)
 107         (remote_fio_ofunc, remote_fileio_sig_init, remote_fileio_sig_set)
 108         (remote_fileio_sig_exit, remote_fileio_ctrl_c_signal_handler):
 109         Delete.
 110         (remote_fileio_o_quit_handler): New global.
 111         (remote_fileio_quit_handler): New function.
 112         (remote_fileio_reply): Check the quit flag instead of the custom
 113         'remote_fio_ctrl_c_flag' flag.  Restore the quit handler instead
 114         of changing the SIGINT handler.
 115         (do_remote_fileio_request): Override the quit handler instead of
 116         changing the SIGINT handler.
 117
 118 2016-06-01  Nick Clifton  <nickc@redhat.com>
 119
 120         * common/common-utils.c (xmalloc_failed): New function.  Provided
 121         so that the version in libiberty is not linked in.
 122
 123 2016-06-01  Markus Metzger  <markus.t.metzger@intel.com>
 124
 125         * infcmd.c (skip_finish_frames): New.
 126         (finish_command): Call skip_finish_frames.
 127
 128 2016-06-01  Yao Qi  <yao.qi@linaro.org>
 129
 130         PR remote/19998
 131         * remote-fileio.c (remote_fileio_ctrl_c_signal_handler): Call
 132         quit_serial_event_set.
 133
 134 2016-06-01  Joel Brobecker  <brobecker@adacore.com>
 135
 136         GDB 7.11.1 released.
 137
 138 2016-05-31  Martin Galvan  <martin.galvan@tallertechnologies.com>
 139
 140         PR c++/19893
 141         * dwarf2loc.c (coerce_pieced_ref, indirect_synthetic_pointer,
 142         fetch_const_value_from_synthetic_pointer): New functions.
 143         (indirect_pieced_value): Move lower half to indirect_synthetic_pointer.
 144         (pieced_value_funcs): Implement coerce_ref.
 145         * valops.c (value_addr): Call coerce_ref for synthetic references.
 146         * valprint.c (valprint_check_validity): Return true for synthetic
 147         references.  Also, don't show "<synthetic pointer>" if they reference
 148         addressable values.
 149         (generic_val_print_ref): Handle synthetic references.  Also move some
 150         code to print_ref_address.
 151         (print_ref_address, get_value_addr_contents): New functions.
 152
 153 2016-05-30  Jan Kratochvil  <jan.kratochvil@redhat.com>
 154
 155         PR c++/15231
 156         * dwarf2read.c (enum pc_bounds_kind): Add PC_BOUNDS_INVALID.
 157         (process_psymtab_comp_unit_reader, read_func_scope): Adjust callers.
 158         (read_lexical_block_scope): Import DIEs from bare DW_TAG_lexical_block.
 159         (read_call_site_scope): Adjust callers.
 160         (dwarf2_get_pc_bounds): Implement pc_bounds_invalid.
 161         (dwarf2_get_subprogram_pc_bounds, get_scope_pc_bounds): Adjust callers.
 162
 163 2016-05-30  Jan Kratochvil  <jan.kratochvil@redhat.com>
 164
 165         Code cleanup: dwarf2_get_pc_bounds: -1/0/+1 -> enum
 166         * dwarf2read.c (enum pc_bounds_kind) New.
 167         (dwarf2_get_pc_bounds): Use it in the declaration.
 168         (process_psymtab_comp_unit_reader): Adjust caller.  Rename has_pc_info
 169         to cu_bounds_kind.
 170         (read_func_scope, read_lexical_block_scope, read_call_site_scope):
 171         Adjust callers.
 172         (dwarf2_get_pc_bounds): Use enum pc_bounds_kind in the definition.
 173         (dwarf2_get_subprogram_pc_bounds, get_scope_pc_bounds): Adjust callers.
 174
 175 2016-05-29  Jan Kratochvil  <jan.kratochvil@redhat.com>
 176
 177         * NEWS (QCatchSyscalls): Remove the parameter.  Include ...
 178         (QCatchSyscalls:1 in qSupported) ... this separate entry which got
 179         deleted.
 180
 181 2016-05-29  Jan Kratochvil  <jan.kratochvil@redhat.com>
 182
 183         * NEWS (N stop reply): Remove empty line.
 184
 185 2016-05-28  Alan Modra  <amodra@gmail.com>
 186
 187         * compile/compile-object-load.c (link_callbacks_multiple_definition,
 188         link_callbacks_warning, link_callbacks_undefined_symbol,
 189         link_callbacks_undefined_symbol, link_callbacks_reloc_overflow,
 190         link_callbacks_reloc_dangerous,
 191         link_callbacks_unattached_reloc): Return void.
 192
 193 2016-05-27  Andrew Burgess  <andrew.burgess@embecosm.com>
 194
 195         * opencl-lang.c (evaluate_subexp_opencl): If
 196         EVAL_AVOID_SIDE_EFFECTS mode, forward the VALUE_LVAL attribute to
 197         the returned value in the STRUCTOP_STRUCT case.
 198
 199 2016-05-27  Andrew Burgess  <andrew.burgess@embecosm.com>
 200
 201         * eval.c (evaluate_subexp_standard): If EVAL_AVOID_SIDE_EFFECTS
 202         mode, forward the VALUE_LVAL attribute to the returned value in
 203         the STRUCTOP_PTR case.
 204
 205 2016-05-25  Tom Tromey  <tom@tromey.com>
 206
 207         * python/py-value.c (value_object_as_number): Use correct spelling
 208         of HAVE_LIBPYTHON2_4.
 209
 210 2016-05-25  Bernhard Heckel  <bernhard.heckel@intel.com>
 211
 212         * f-typeprint.c (f_type_print_base): Replace 0 by show.
 213
 214 2016-05-25  Bernhard Heckel  <bernhard.heckel@intel.com>
 215
 216         * f-typeprint.c (f_type_print_base): Decrease show by one.
 217
 218 2016-05-25  Bernhard Heckel  <bernhard.heckel@intel.com>
 219
 220         * f-typeprint.c (f_type_print_base): Don't print fields when show < 0.
 221
 222 2016-05-25  Bernhard Heckel  <bernhard.heckel@intel.com>
 223
 224         * f-typeprint.c (f_type_print_base): Take print level into account.
 225
 226 2016-05-24  Tom Tromey  <tom@tromey.com>
 227
 228         PR python/17386:
 229         * python/py-value.c (value_object_as_number): Add
 230         nb_inplace_floor_divide, nb_inplace_true_divide, nb_index.
 231
 232 2016-05-24  Tom Tromey  <tom@tromey.com>
 233
 234         * python/py-value.c (value_object_as_number): Add
 235         nb_inplace_divide for Python 2.
 236
 237 2016-05-23  Tom Tromey  <tom@tromey.com>
 238
 239         PR python/17981:
 240         * python/py-breakpoint.c (gdbpy_breakpoints): Return a new tuple
 241         when there are no breakpoints.
 242
 243 2016-05-24  Pedro Alves  <palves@redhat.com>
 244
 245         PR gdb/19828
 246         * linux-nat.c (attach_proc_task_lwp_callback): Mark the lwp
 247         resumed, and add the thread to GDB's thread list.
 248
 249 2016-05-24  Pedro Alves  <palves@redhat.com>
 250
 251         PR gdb/19828
 252         * linux-nat.c (get_pending_status): If the thread reported the
 253         event to the core and it's pending, use the pending status signal
 254         number.
 255
 256 2016-05-24  Pedro Alves  <palves@redhat.com>
 257
 258         PR gdb/19828
 259         * linux-nat.c (lwp_lwpid_htab): New htab.
 260         (lwp_info_hash, lwp_lwpid_htab_eq, lwp_lwpid_htab_create)
 261         (lwp_lwpid_htab_add_lwp): New functions.
 262         (lwp_list): Tweak comment.
 263         (lwp_list_add, lwp_list_remove, lwp_lwpid_htab_remove_pid): New
 264         functions.
 265         (purge_lwp_list): Rewrite, using htab_traverse_noresize.
 266         (add_initial_lwp): Add lwp to htab too.  Use lwp_list_add.
 267         (delete_lwp): Use lwp_list_remove.  Remove htab too.
 268         (find_lwp_pid): Search in htab.
 269         (_initialize_linux_nat): Call lwp_lwpid_htab_create.
 270         * linux-nat.h (struct lwp_info) <prev>: New field.
 271
 272 2016-05-24  Pedro Alves  <palves@redhat.com>
 273
 274         PR gdb/19828
 275         * linux-nat.c (lwp_lwpid_htab): New htab.
 276         (lwp_info_hash, lwp_lwpid_htab_eq, lwp_lwpid_htab_create)
 277         (lwp_lwpid_htab_add_lwp): New functions.
 278         (lwp_list): Tweak comment.
 279         (lwp_list_add, lwp_list_remove, lwp_lwpid_htab_remove_pid): New
 280         functions.
 281         (purge_lwp_list): Rewrite, using htab_traverse_noresize.
 282         (add_initial_lwp): Add lwp to htab too.  Use lwp_list_add.
 283         (delete_lwp): Use lwp_list_remove.  Remove htab too.
 284         (find_lwp_pid): Search in htab.
 285         (_initialize_linux_nat): Call lwp_lwpid_htab_create.
 286         * linux-nat.h (struct lwp_info) <prev>: New field.
 287
 288 2016-05-24  Pedro Alves  <palves@redhat.com>
 289
 290         PR gdb/19828
 291         * linux-nat.c (linux_resume_one_lwp_throw): Clear the LWP's core
 292         field.
 293         (linux_nat_update_thread_list): Don't fetch the core if already
 294         known.
 295
 296 2016-05-24  Pedro Alves  <palves@redhat.com>
 297
 298         PR gdb/19828
 299         * linux-tdep.c (find_mapping_size): Delete.
 300         (linux_vsyscall_range_raw): Rewrite reading from
 301         /proc/PID/task/PID/maps directly instead of using
 302         gdbarch_find_memory_regions.
 303
 304 2016-05-24  Pedro Alves  <palves@redhat.com>
 305
 306         PR gdb/19828
 307         * linux-nat.c (report_thread_events): New global.
 308         (linux_handle_extended_wait): Report
 309         TARGET_WAITKIND_THREAD_CREATED if thread event reporting is
 310         enabled.
 311         (wait_lwp, linux_nat_filter_event): Report all thread exits if
 312         thread event reporting is enabled.  Remove comment.
 313         (filter_exit_event): New function.
 314         (linux_nat_wait_1): Use it.
 315         (linux_nat_thread_events): New function.
 316         (linux_nat_add_target): Install it as target_thread_events method.
 317
 318 2016-05-24  Yan-Ting Lin  <currygt52@gmail.com>
 319
 320         * MAINTAINERS (Write After Approval): Add "Yan-Ting Lin".
 321
 322 2016-05-23  Yao Qi  <yao.qi@arm.com>
 323
 324         * arch-utils.c (default_code_of_frame_writable): New function.
 325         * arch-utils.h (default_code_of_frame_writable): Declare.
 326         * arm-tdep.c (arm_code_of_frame_writable): New function.
 327         (arm_gdbarch_init): Install gdbarch method
 328         code_of_frame_writable if the target is M-profile.
 329         * frame.c (skip_unwritable_frames): New function.
 330         * frame.h (skip_unwritable_frames): Declare.
 331         * gdbarch.sh (code_of_frame_writable): New.
 332         * gdbarch.c, gdbarch.h: Re-generated.
 333         * infcmd.c (finish_command): Call skip_unwritable_frames.
 334
 335 2016-05-23  Tom Tromey  <tom@tromey.com>
 336
 337         PR python/19438, PR python/18393:
 338         * python/py-objfile.c (objfpy_initialize): Initialize self->dict.
 339         * python/py-progspace.c (pspy_initialize): Initialize self->dict.
 340
 341 2016-05-23  Gary Benson  <gbenson@redhat.com>
 342
 343         * nat/gdb_thread_db.h (td_thr_validate_ftype): Remove typedef.
 344         * linux-thread-db.c (struct thread_db_info) <td_thr_validate_p>:
 345         Remove field.
 346         (try_thread_db_load_1): Remove td_thr_validate initialization.
 347
 348 2016-05-23  Jon Boden  <jon@ubuntubsd.org>  (tiny change)
 349
 350         * configure.ac: Search for libutil-freebsd as alternative to libutil.
 351         * configure: Re-generated.
 352
 353 2016-05-19  Andreas Schwab  <schwab@suse.de>
 354
 355         * ia64-libunwind-tdep.c (libunwind_descr): Add cast from void *.
 356         (libunwind_frame_set_descr): Likewise.
 357         (libunwind_frame_cache): Likewise.
 358         (libunwind_frame_dealloc_cache): Likewise.
 359         (libunwind_frame_sniffer): Likewise.
 360         (libunwind_search_unwind_table): Likewise.
 361         (libunwind_sigtramp_frame_sniffer): Likewise.
 362         (libunwind_get_reg_special): Likewise.
 363         (libunwind_load): Likewise.
 364         * ia64-linux-nat.c (ia64_linux_fetch_register): Likewise.
 365         (ia64_linux_store_register): Likewise.
 366         (ia64_linux_xfer_partial): Likewise.
 367         * ia64-tdep.c (ia64_access_reg): Likewise.
 368         (ia64_access_fpreg): Likewise.
 369         (ia64_access_rse_reg): Likewise.
 370         (ia64_access_rse_fpreg): Likewise.
 371
 372 2016-05-18  Tom Tromey  <tom@tromey.com>
 373
 374         * rust-lang.c (rust_subscript): Initialize "high".
 375
 376 2016-05-17  Simon Marchi  <simon.marchi@ericsson.com>
 377
 378         PR gdb/20045
 379         * mi/mi-main.c (mi_on_resume): Call target_can_async_p instead
 380         of target_is_async_p.
 381
 382 2016-05-17  Simon Marchi  <simon.marchi@ericsson.com>
 383
 384         PR gdb/18077
 385         * mi/mi-main.c (run_one_inferior): Use run target to determine
 386         whether to run async or not.
 387         (mi_cmd_exec_run): Likewise.
 388
 389 2016-05-17  Tom Tromey  <tom@tromey.com>
 390
 391         * std-operator.def (OP_RANGE): Rename from OP_F90_RANGE.
 392         * rust-lang.c: Don't include f-lang.h.
 393         (rust_range, rust_compute_range, rust_subscript)
 394         (rust_evaluate_subexp): Update.
 395         * rust-exp.y: Don't include f-lang.h.
 396         (ast_range, convert_ast_to_expression): Update.
 397         * parse.c (operator_length_standard): Update.
 398         * f-lang.h (enum f90_range_type): Move to expression.h.
 399         * f-exp.y: Use OP_RANGE.
 400         * expression.h (enum range_type): New enum; renamed from
 401         f90_range_type.
 402         * expprint.c: Don't include f-lang.h.
 403         (print_subexp_standard, dump_subexp_body_standard): Use OP_RANGE.
 404         * eval.c (value_f90_subarray, evaluate_subexp_standard): Update.
 405
 406 2016-05-17  Tom Tromey  <tom@tromey.com>
 407
 408         * NEWS: Add Rust item.
 409
 410 2016-05-17  Tom Tromey  <tom@tromey.com>
 411             Manish Goregaokar <manishsmail@gmail.com>
 412
 413         * symtab.c (symbol_find_demangled_name): Handle Rust.
 414         * symfile.c (init_filename_language_table): Treat ".rs" as Rust.
 415         * std-operator.def (STRUCTOP_ANONYMOUS, OP_RUST_ARRAY): New
 416         constants.
 417         * rust-lang.h: New file.
 418         * rust-lang.c: New file.
 419         * rust-exp.y: New file.
 420         * dwarf2read.c (read_file_scope): Add Rust producer sniffing.
 421         (dwarf2_compute_name, read_func_scope, read_structure_type)
 422         (read_base_type, read_subrange_type, set_cu_language)
 423         (new_symbol_full, determine_prefix): Handle Rust.
 424         * defs.h (enum language) <language_rust>: New constant.
 425         * Makefile.in (SFILES): Add rust-exp.y, rust-lang.c.
 426         (COMMON_OBS): Add rust-exp.o, rust-lang.o.
 427
 428 2016-05-17  Tom Tromey  <tom@tromey.com>
 429
 430         * valprint.h (struct generic_val_print_array) <array_start,
 431         array_end>: New fields.
 432         * valprint.c (generic_val_print_array): Add "decorations"
 433         parameter.  Use "array_start", "array_end".
 434         (generic_val_print) <TYPE_CODE_ARRAY>: Update.
 435         * p-valprint.c (p_decorations): Update.
 436         * m2-valprint.c (m2_decorations): Update.
 437         * f-valprint.c (f_decorations): Update.
 438         * c-valprint.c (c_decorations): Update.
 439
 440 2016-05-17  Tom Tromey  <tom@tromey.com>
 441
 442         * NEWS: Add "maint selftest" entry.
 443         * selftest.h: New file.
 444         * selftest.c: New file.
 445         * maint.c: Include selftest.h.
 446         (maintenance_selftest): New function.
 447         (_initialize_maint_cmds): Add "maint selftest" command.
 448         * configure.ac (GDB_SELF_TEST): Maybe define.
 449         * config.in, configure: Rebuild.
 450         * Makefile.in (SFILES): Add selftest.c.
 451         (COMMON_OBS): Add selftest.o.
 452
 453 2016-05-17  Tom Tromey  <tom@tromey.com>
 454
 455         * expprint.c: Include f-lang.h.
 456         (print_subexp_standard, dump_subexp_body_standard): Handle
 457         OP_F90_RANGE.
 458
 459 2016-05-17  Tom Tromey  <tom@tromey.com>
 460
 461         * Makefile.in (init.c): Search .y files for initialization
 462         functions.
 463
 464 2016-05-12  Doug Evans  <dje@google.com>
 465
 466         PR symtab/19999
 467         * dwarf2loc.c (dwarf2_find_location_expression): For DWO files still
 468         add base_offset.
 469
 470 2016-05-10  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>
 471
 472         * iq2000-tdep.c (iq2000_scan_prologue): Remove if that shouldn't guard
 473         anything.
 474         * linespec.c (add_sal_to_sals): Restore call to symtab_to_fullname.
 475
 476 2016-05-10  Thomas Preud'homme  <thomas.preudhomme@arm.com>
 477
 478         * arm-tdep.c (arm_elf_make_msymbol_special): Use
 479         ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol.
 480
 481 2016-05-07  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>
 482
 483         * aarch64-linux-tdep.c (aarch64_linux_sigframe_init): Remove unused
 484         variables.
 485         * aarch64-tdep.c (aarch64_skip_prologue): Likewise.
 486         (aarch64_scan_prologue): Likewise.
 487         (aarch64_prologue_prev_register): Likewise.
 488         (aarch64_dwarf2_prev_register): Likewise.
 489         (pass_in_v): Likewise.
 490         (aarch64_push_dummy_call): Likewise.
 491         (aarch64_breakpoint_from_pc): Likewise.
 492         (aarch64_return_in_memory): Likewise.
 493         (aarch64_return_value): Likewise.
 494         (aarch64_displaced_step_b_cond): Likewise.
 495         (aarch64_displaced_step_cb): Likewise.
 496         (aarch64_displaced_step_tb): Likewise.
 497         (aarch64_gdbarch_init): Likewise.
 498         (aarch64_process_record): Likewise.
 499         * alpha-mdebug-tdep.c (alpha_mdebug_init_abi): Likewise.
 500         * alpha-tdep.c (_initialize_alpha_tdep): Likewise.
 501         * amd64-dicos-tdep.c (amd64_dicos_init_abi): Likewise.
 502         * amd64-linux-tdep.c (amd64_dtrace_parse_probe_argument): Likewise.
 503         * amd64-tdep.c (fixup_riprel): Likewise.
 504         * amd64-windows-tdep.c (amd64_windows_frame_decode_epilogue): Likewise.
 505         (amd64_windows_frame_decode_insns): Likewise.
 506         (amd64_windows_frame_cache): Likewise.
 507         (amd64_windows_frame_prev_register): Likewise.
 508         (amd64_windows_frame_this_id): Likewise.
 509         (amd64_windows_init_abi): Likewise.
 510         * arm-linux-tdep.c (arm_linux_get_syscall_number): Likewise.
 511         (arm_linux_get_next_pcs_syscall_next_pc): Likewise.
 512         * arm-symbian-tdep.c (arm_symbian_init_abi): Likewise.
 513         * arm-tdep.c (arm_make_epilogue_frame_cache): Likewise.
 514         (arm_epilogue_frame_prev_register): Likewise.
 515         (arm_record_vdata_transfer_insn): Likewise.
 516         (arm_record_exreg_ld_st_insn): Likewise.
 517         * auto-load.c (execute_script_contents): Likewise.
 518         (print_scripts): Likewise.
 519         * avr-tdep.c (avr_frame_prev_register): Likewise.
 520         (avr_push_dummy_call): Likewise.
 521         * bfin-linux-tdep.c (bfin_linux_sigframe_init): Likewise.
 522         * bfin-tdep.c (bfin_gdbarch_init): Likewise.
 523         * blockframe.c (find_pc_partial_function_gnu_ifunc): Likewise.
 524         * break-catch-throw.c (fetch_probe_arguments): Likewise.
 525         * breakpoint.c (breakpoint_xfer_memory): Likewise.
 526         (breakpoint_init_inferior): Likewise.
 527         (breakpoint_inserted_here_p): Likewise.
 528         (software_breakpoint_inserted_here_p): Likewise.
 529         (hardware_breakpoint_inserted_here_p): Likewise.
 530         (bpstat_what): Likewise.
 531         (break_range_command): Likewise.
 532         (save_breakpoints): Likewise.
 533         * coffread.c (coff_symfile_read): Likewise.
 534         * cris-tdep.c (cris_push_dummy_call): Likewise.
 535         (cris_scan_prologue): Likewise.
 536         (cris_register_size): Likewise.
 537         (_initialize_cris_tdep): Likewise.
 538         * d-exp.y: Likewise.
 539         * dbxread.c (dbx_read_symtab): Likewise.
 540         (process_one_symbol): Likewise.
 541         (coffstab_build_psymtabs): Likewise.
 542         (elfstab_build_psymtabs): Likewise.
 543         * dicos-tdep.c (dicos_init_abi): Likewise.
 544         * disasm.c (do_mixed_source_and_assembly): Likewise.
 545         (gdb_disassembly): Likewise.
 546         * dtrace-probe.c (dtrace_process_dof): Likewise.
 547         * dwarf2read.c (error_check_comp_unit_head): Likewise.
 548         (build_type_psymtabs_1): Likewise.
 549         (skip_one_die): Likewise.
 550         (process_imported_unit_die): Likewise.
 551         (dwarf2_physname): Likewise.
 552         (read_file_scope): Likewise.
 553         (setup_type_unit_groups): Likewise.
 554         (create_dwo_cu_reader): Likewise.
 555         (create_dwo_cu): Likewise.
 556         (create_dwo_unit_in_dwp_v1): Likewise.
 557         (create_dwo_unit_in_dwp_v2): Likewise.
 558         (lookup_dwo_unit_in_dwp): Likewise.
 559         (free_dwo_file): Likewise.
 560         (check_producer): Likewise.
 561         (dwarf2_add_typedef): Likewise.
 562         (dwarf2_add_member_fn): Likewise.
 563         (read_unsigned_leb128): Likewise.
 564         (read_signed_leb128): Likewise.
 565         (dwarf2_const_value): Likewise.
 566         (follow_die_sig_1): Likewise.
 567         (dwarf_decode_macro_bytes): Likewise.
 568         * extension.c (restore_active_ext_lang): Likewise.
 569         * frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Likewise.
 570         * ft32-tdep.c (ft32_analyze_prologue): Likewise.
 571         * gdbtypes.c (lookup_typename): Likewise.
 572         (resolve_dynamic_range): Likewise.
 573         (check_typedef): Likewise.
 574         * h8300-tdep.c (h8300_is_argument_spill): Likewise.
 575         (h8300_gdbarch_init): Likewise.
 576         * hppa-tdep.c (hppa32_push_dummy_call): Likewise.
 577         (hppa_frame_this_id): Likewise.
 578         (_initialize_hppa_tdep): Likewise.
 579         * hppanbsd-tdep.c (hppanbsd_sigtramp_cache_init): Likewise.
 580         * hppaobsd-tdep.c (hppaobsd_supply_fpregset): Likewise.
 581         * i386-dicos-tdep.c (i386_dicos_init_abi): Likewise.
 582         * i386-tdep.c (i386_bnd_type): Likewise.
 583         (i386_gdbarch_init): Likewise.
 584         (i386_mpx_bd_base): Likewise.
 585         * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Likewise.
 586         * i386obsd-tdep.c (i386obsd_elf_init_abi): Likewise.
 587         * ia64-tdep.c (examine_prologue): Likewise.
 588         (ia64_frame_cache): Likewise.
 589         (ia64_push_dummy_call): Likewise.
 590         * infcmd.c (finish_command_fsm_async_reply_reason): Likewise.
 591         (default_print_one_register_info): Likewise.
 592         * infrun.c (infrun_thread_ptid_changed): Likewise.
 593         (thread_still_needs_step_over): Likewise.
 594         (stop_all_threads): Likewise.
 595         (restart_threads): Likewise.
 596         (keep_going_stepped_thread): Likewise.
 597         * iq2000-tdep.c (iq2000_scan_prologue): Likewise.
 598         * language.c (language_init_primitive_type_symbols): Likewise.
 599         * linespec.c (add_sal_to_sals): Likewise.
 600         * linux-nat.c (status_callback): Likewise.
 601         (kill_unfollowed_fork_children): Likewise.
 602         (linux_nat_kill): Likewise.
 603         * linux-tdep.c (linux_fill_prpsinfo): Likewise.
 604         * linux-thread-db.c (thread_db_notice_clone): Likewise.
 605         (record_thread): Likewise.
 606         * location.c (string_to_event_location_basic): Likewise.
 607         * m32c-tdep.c (m32c_prev_register): Likewise.
 608         * m32r-linux-tdep.c (m32r_linux_init_abi): Likewise.
 609         * m32r-tdep.c (decode_prologue): Likewise.
 610         * m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise.
 611         * machoread.c (macho_symtab_read): Likewise.
 612         (macho_symfile_read): Likewise.
 613         (macho_symfile_offsets): Likewise.
 614         * maint.c (set_per_command_cmd): Likewise.
 615         * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise.
 616         (mi_cmd_stack_list_variables): Likewise.
 617         * mi/mi-main.c (mi_cmd_exec_run): Likewise.
 618         (output_register): Likewise.
 619         (mi_cmd_execute): Likewise.
 620         (mi_cmd_trace_define_variable): Likewise.
 621         (print_variable_or_computed): Likewise.
 622         * minsyms.c (prim_record_minimal_symbol_full): Likewise.
 623         * mn10300-tdep.c (mn10300_frame_prev_register): Likewise.
 624         * msp430-tdep.c (msp430_pseudo_register_write): Likewise.
 625         * mt-tdep.c (mt_registers_info): Likewise.
 626         * nios2-tdep.c (nios2_analyze_prologue): Likewise.
 627         (nios2_push_dummy_call): Likewise.
 628         (nios2_frame_unwind_cache): Likewise.
 629         (nios2_stub_frame_cache): Likewise.
 630         (nios2_stub_frame_sniffer): Likewise.
 631         (nios2_gdbarch_init): Likewise.
 632         * ppc-ravenscar-thread.c: Likewise.
 633         * ppcfbsd-tdep.c (ppcfbsd_sigtramp_frame_cache): Likewise.
 634         * python/py-evts.c (add_new_registry): Likewise.
 635         * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
 636         (bpfinishpy_detect_out_scope_cb): Likewise.
 637         * python/py-framefilter.c (py_print_value): Likewise.
 638         * python/py-inferior.c (infpy_write_memory): Likewise.
 639         * python/py-infevents.c (create_inferior_call_event_object): Likewise.
 640         * python/py-infthread.c (thpy_get_ptid): Likewise.
 641         * python/py-linetable.c (ltpy_get_pcs_for_line): Likewise.
 642         (ltpy_get_all_source_lines): Likewise.
 643         (ltpy_is_valid): Likewise.
 644         (ltpy_iternext): Likewise.
 645         * python/py-symtab.c (symtab_and_line_to_sal_object): Likewise.
 646         * python/py-unwind.c (pyuw_object_attribute_to_pointer): Likewise.
 647         (unwind_infopy_str): Likewise.
 648         * python/py-varobj.c (py_varobj_get_iterator): Likewise.
 649         * ravenscar-thread.c (ravenscar_inferior_created): Likewise.
 650         * rs6000-aix-tdep.c (rs6000_push_dummy_call): Likewise.
 651         * rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Likewise.
 652         * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Likewise.
 653         * s390-linux-tdep.c (s390_supply_tdb_regset): Likewise.
 654         (s390_frame_prev_register): Likewise.
 655         (s390_dwarf2_frame_init_reg): Likewise.
 656         (s390_record_vr): Likewise.
 657         (s390_process_record): Likewise.
 658         * score-tdep.c (score_push_dummy_call): Likewise.
 659         (score3_analyze_prologue): Likewise.
 660         * sh-tdep.c (sh_extract_return_value_nofpu): Likewise.
 661         * sh64-tdep.c (sh64_analyze_prologue): Likewise.
 662         (sh64_push_dummy_call): Likewise.
 663         (sh64_extract_return_value): Likewise.
 664         (sh64_do_fp_register): Likewise.
 665         * solib-aix.c (solib_aix_get_section_offsets): Likewise.
 666         * solib-darwin.c (darwin_read_exec_load_addr_from_dyld): Likewise.
 667         (darwin_solib_read_all_image_info_addr): Likewise.
 668         * solib-dsbt.c (enable_break): Likewise.
 669         * solib-frv.c (enable_break2): Likewise.
 670         (frv_fdpic_find_canonical_descriptor): Likewise.
 671         * solib-svr4.c (svr4_handle_solib_event): Likewise.
 672         * sparc-tdep.c (sparc_skip_stack_check): Likewise.
 673         * sparc64-linux-tdep.c (sparc64_linux_get_longjmp_target): Likewise.
 674         * sparcobsd-tdep.c (sparc32obsd_init_abi): Likewise.
 675         * spu-tdep.c (info_spu_dma_cmdlist): Likewise.
 676         * stack.c (read_frame_local): Likewise.
 677         * symfile.c (symbol_file_add_separate): Likewise.
 678         (remove_symbol_file_command): Likewise.
 679         * symmisc.c (maintenance_print_one_line_table): Likewise.
 680         * symtab.c (symbol_cache_flush): Likewise.
 681         (basic_lookup_transparent_type): Likewise.
 682         (sort_search_symbols_remove_dups): Likewise.
 683         * target.c (target_memory_map): Likewise.
 684         (target_detach): Likewise.
 685         (target_resume): Likewise.
 686         (acquire_fileio_fd): Likewise.
 687         (target_store_registers): Likewise.
 688         * thread.c (print_thread_info_1): Likewise.
 689         * tic6x-tdep.c (tic6x_analyze_prologue): Likewise.
 690         * tilegx-linux-tdep.c (tilegx_linux_sigframe_init): Likewise.
 691         * tilegx-tdep.c (tilegx_push_dummy_call): Likewise.
 692         (tilegx_analyze_prologue): Likewise.
 693         (tilegx_stack_frame_destroyed_p): Likewise.
 694         (tilegx_frame_cache): Likewise.
 695         * tracefile.c (trace_save): Likewise.
 696         * tracepoint.c (encode_actions_and_make_cleanup): Likewise.
 697         (start_tracing): Likewise.
 698         (print_one_static_tracepoint_marker): Likewise.
 699         * tui/tui.c (tui_enable): Likewise.
 700         * valops.c (value_struct_elt_bitpos): Likewise.
 701         (find_overload_match): Likewise.
 702         (find_oload_champ): Likewise.
 703         * value.c (value_contents_copy_raw): Likewise.
 704         * windows-tdep.c (windows_get_tlb_type): Likewise.
 705         * x86-linux-nat.c (x86_linux_enable_btrace): Likewise.
 706         * xcoffread.c (record_minimal_symbol): Likewise.
 707         (scan_xcoff_symtab): Likewise.
 708         * xtensa-tdep.c (execute_code): Likewise.
 709         (xtensa_gdbarch_init): Likewise.
 710         (_initialize_xtensa_tdep): Likewise.
 711
 712 2016-05-04  Ulrich Weigand  <uweigand@de.ibm.com>
 713
 714         * spu-linux-nat.c (spu_bfd_iovec_pread): Add pointer cast for C++.
 715         (spu_bfd_open): Likewise.
 716
 717 2016-05-04  Yao Qi  <yao.qi@linaro.org>
 718
 719         PR gdb/19947
 720         * corefile.c (read_memory): Rename it to ...
 721         (read_memory_object): ... it.  Add parameter object.
 722         (read_memory): Call read_memory_object.
 723         (read_stack): Likewise.
 724         (read_code): Likewise.
 725
 726 2016-05-03  Yunlian Jiang <yunlian@google.com>
 727             Doug Evans  <dje@google.com>
 728
 729         PR symtab/19914
 730         * dwarf2read.c (open_and_init_dwp_file): Look at backlink if objfile
 731         is separate debug file.
 732
 733 2016-05-03  Don Breazeal <donb@codesourcery.com>
 734
 735         * serial.h (gdb_pipe): Fix argument names in comment.
 736
 737 2016-05-03  Pedro Alves <palves@redhat.com>
 738
 739         PR python/20037
 740         * python/python.c (_initialize_python) [IS_PY3K]: xstrdup/xfree
 741         oldloc.
 742
 743 2016-05-03  Pedro Alves <palves@redhat.com>
 744
 745         * python/python.c (_initialize_python) [IS_PY3K]: Remove dead
 746         code.
 747
 748 2016-05-03  Pedro Alves  <palves@redhat.com>
 749
 750         * configure.ac (PYTHON_LIBS): Sed away "-Xlinker -export-dynamic".
 751         * configure: Regenerate.
 752
 753 2016-05-03  Pedro Alves  <palves@redhat.com>
 754
 755         * configure.ac (checking for the dynamic export flag): Add
 756         $PYTHON_CPPFLAGS to CPPFLAGS.
 757         * configure: Regenerate.
 758
 759 2016-05-03  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>
 760
 761         * symfile.c (find_pc_overlay): Add braces to avoid -Wparentheses
 762         warning.
 763         (find_pc_mapped_section): Likewise.
 764         (list_overlays_command): Likewise.
 765
 766 2016-05-02  Eli Zaretskii  <eliz@gnu.org>
 767
 768         * windows-nat.c (_initialize_check_for_gdb_ini): Fix off-by-one
 769         error in allocation of space for "$HOME/.gdbinit" string.  This
 770         caused GDB to abort on startup whenever a '~/gdb.ini' file was
 771         actually found, because xsnprintf would hit an assertion
 772         violation.
 773
 774 2016-04-28  Simon Marchi  <simon.marchi@ericsson.com>
 775
 776         * cli/cli-decode.c (help_cmd_list): Do not list commands that
 777         are deprecated.
 778
 779 2016-04-27  Jan Kratochvil  <jan.kratochvil@redhat.com>
 780
 781         * remote.c (remote_start_remote): Detect PACKET_vFile_setfs.support.
 782
 783 2016-04-27  Martin Galvan  <martin.galvan@tallertechnologies.com>
 784
 785         * c-valprint.c (c_value_print): Always convert val back to reference
 786         type if we converted it to a pointer type.
 787
 788 2016-04-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>
 789
 790         * configure.ac: Enhance configure check for babeltrace to reject
 791         non-C++-enabled versions.
 792         * configure: Regenerate.
 793
 794 2016-04-26  Sanimir Agovic  <sanimir.agovic@intel.com>
 795             Keven Boell  <keven.boell@intel.com>
 796             Bernhard Heckel  <bernhard.heckel@intel.com>
 797
 798         * f-valprint.c (f77_create_arrayprint_offset_tbl): Remove
 799         function.
 800         (F77_DIM_SIZE, F77_DIM_OFFSET): Remove macro.
 801         (f77_print_array_1): Use value_subscript to subscript a
 802         value array.
 803         (f77_print_array): Remove call to f77_create_arrayprint_offset_tbl.
 804         (f_val_print): Use value_field to construct a field value.
 805
 806 2016-04-26  Bernhard Heckel  <bernhard.heckel@intel.com>
 807
 808         * valarith.c (value_address): Resolve dynamic types.
 809
 810 2016-04-26  Bernhard Heckel  <bernhard.heckel@intel.com>
 811             Keven Boell  <kevel.boell@intel.com>
 812
 813         * NEWS: Add new supported features for fortran.
 814         * gdbtypes.c (remove_dyn_prop): New.
 815         (resolve_dynamic_struct): Keep type length for fortran structs.
 816         * gdbtypes.h: Forward declaration of new function.
 817         * value.c (value_address): Return dynamic resolved location of a value.
 818         (set_value_component_location): Adjust the value address
 819         for single value prints.
 820         (value_primitive_field): Support value types with a dynamic location.
 821         (set_internalvar): Remove dynamic location property of
 822         internal variables.
 823
 824 2016-04-25  Pedro Alves  <palves@redhat.com>
 825             Yao Qi  <yao.qi@linaro.org>
 826
 827         * mem-break.c (set_raw_breakpoint_at): Create a raw breakpoint
 828         object.  Insert it if it is not inserted yet.  Increase the
 829         refcount and link it into the proc's raw breakpoint list.
 830
 831 2016-04-25  Yao Qi  <yao.qi@linaro.org>
 832
 833         * breakpoint.c (should_be_inserted): Return 0 if the location's
 834         owner is not single step breakpoint or single step breakpoint's
 835         thread isn't the thread which is stepping past a breakpoint.
 836         * gdbarch.sh (software_single_step): Update comments.
 837         * gdbarch.h: Regenerated.
 838         * infrun.c (struct step_over_info) <thread>: New field.
 839         (set_step_over_info): New argument 'thread'.  Callers updated.
 840         (clear_step_over_info): Set field thread to -1.
 841         (thread_is_stepping_over_breakpoint): New function.
 842         * infrun.h (thread_is_stepping_over_breakpoint): Declaration.
 843
 844 2016-04-22  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>
 845
 846         * ppc-linux-nat.c (ppc_linux_read_description): Use PPC_FEATURE_HAS_VSX
 847         and PPC_FEATURE_HAS_ALTIVEC to check if such features are available.
 848
 849 2016-04-22  Yao Qi  <yao.qi@linaro.org>
 850
 851         * valops.c (read_value_memory): New local variable 'stack'.
 852         Set it to either TARGET_OBJECT_STACK_MEMORY or
 853         TARGET_OBJECT_MEMORY.
 854
 855 2016-04-22  Pedro Alves  <palves@redhat.com>
 856
 857         * ada-exp.y: Remove all yy symbol remappings.
 858         (GDB_YY_REMAP_PREFIX): Define.
 859         Include "yy-remap.h".
 860         * ada-lang.c (ada_language_defn): Adjust.
 861         * ada-lang.h (ada_error): Rename to ...
 862         (ada_yyerror): ... this.
 863         * c-exp.y: Remove all yy symbol remappings.
 864         (GDB_YY_REMAP_PREFIX): Define.
 865         Include "yy-remap.h".
 866         * c-lang.c (c_language_defn, cplus_language_defn)
 867         (asm_language_defn, minimal_language_defn): Adjust.
 868         * c-lang.h (c_error): Rename to ...
 869         (c_yyerror): ... this.
 870         * d-exp.y: Remove all yy symbol remappings.
 871         (GDB_YY_REMAP_PREFIX): Define.
 872         Include "yy-remap.h".
 873         * d-lang.c (d_language_defn): Adjust.
 874         * d-lang.h (d_error): Rename to ...
 875         (d_yyerror): ... this.
 876         * f-exp.y: Remove all yy symbol remappings.
 877         (GDB_YY_REMAP_PREFIX): Define.
 878         Include "yy-remap.h".
 879         * f-lang.c (f_language_defn): Adjust.
 880         * f-lang.h (f_error): Rename to ...
 881         (f_yyerror): ... this.
 882         * go-exp.y: Remove all yy symbol remappings.
 883         (GDB_YY_REMAP_PREFIX): Define.
 884         Include "yy-remap.h".
 885         * go-lang.c (go_language_defn): Adjust.
 886         * go-lang.h (go_error): Rename to ...
 887         (go_yyerror): ... this.
 888         * jv-exp.y: Remove all yy symbol remappings.
 889         (GDB_YY_REMAP_PREFIX): Define.
 890         Include "yy-remap.h".
 891         * jv-lang.c (java_language_defn): Adjust.
 892         * jv-lang.h (java_error): Rename to ...
 893         (java_yyerror): ... this.
 894         * m2-exp.y: Remove all yy symbol remappings.
 895         (GDB_YY_REMAP_PREFIX): Define.
 896         Include "yy-remap.h".
 897         * m2-lang.c (m2_language_defn): Adjust.
 898         * m2-lang.h (m2_error): Rename to ...
 899         (m2_yyerror): ... this.
 900         * objc-exp.y: Remove all yy symbol remappings.
 901         (GDB_YY_REMAP_PREFIX): Define.
 902         Include "yy-remap.h".
 903         * objc-lang.c (objc_language_defn): Adjust.
 904         * opencl-lang.c (opencl_language_defn): Adjust.
 905         * p-exp.y: Remove all yy symbol remappings.
 906         (GDB_YY_REMAP_PREFIX): Define.
 907         Include "yy-remap.h".
 908         * p-lang.c (pascal_language_defn): Adjust.
 909         * p-lang.h (pascal_error): Rename to ...
 910         (pascal_yyerror): ... this.
 911         * yy-remap.h: New file.
 912
 913 2016-04-22  Pedro Alves  <palves@redhat.com>
 914
 915         * common/common-exceptions.h (GDB_XCPT_TRY): Remove mention of
 916         the foreign frames issue.
 917         [__cplusplus] (GDB_XCPT): Define as GDB_XCPT_TRY.
 918
 919 2016-04-22  Pedro Alves  <palves@redhat.com>
 920
 921         * common/common-exceptions.c (enum catcher_state, struct catcher)
 922         (current_catcher): Define in C++ mode too.
 923         (exceptions_state_mc_catch): Call throw_exception_sjlj instead of
 924         throw_exception.
 925         (throw_exception_sjlj, throw_exception_cxx): New functions,
 926         factored out from throw_exception.
 927         (throw_exception): Reimplement.
 928         * common/common-exceptions.h (exceptions_state_mc_init)
 929         (exceptions_state_mc_action_iter)
 930         (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
 931         Declare in C++ mode too.
 932         (TRY): Rename to ...
 933         (TRY_SJLJ): ... this.
 934         (CATCH): Rename to ...
 935         (CATCH_SJLJ): ... this.
 936         (END_CATCH): Rename to ...
 937         (END_CATCH_SJLJ): ... this.
 938         [GDB_XCPT == GDB_XCPT_SJMP] (TRY, CATCH, END_CATCH): Map to SJLJ
 939         equivalents.
 940         (throw_exception): Update comments.
 941         (throw_exception_sjlj): Declare.
 942         * event-top.c (gdb_rl_callback_read_char_wrapper): Extend intro
 943         comment.  Wrap body in TRY_SJLJ/CATCH_SJLJ and rethrow any
 944         intercepted exception.
 945         (gdb_rl_callback_handler): New function.
 946         (gdb_rl_callback_handler_install): Always install
 947         gdb_rl_callback_handler as readline callback.
 948
 949 2016-04-22  Pedro Alves  <palves@redhat.com>
 950
 951         * event-top.c (rl_callback_read_char_wrapper): Rename to ...
 952         (gdb_rl_callback_read_char_wrapper): ... this.
 953         (change_line_handler, gdb_setup_readline): Adjust.
 954
 955 2016-04-22  Yao Qi  <yao.qi@linaro.org>
 956
 957         * aarch32-linux-nat.c (aarch32_gp_regcache_supply): Clear CPSR
 958         bits 20 to 23.
 959
 960 2016-04-22  Joel Brobecker  <brobecker@adacore.com>
 961
 962         * MAINTAINER: Remove myself as AIX Maintainer.
 963
 964 2016-04-22  Maciej W. Rozycki  <macro@imgtec.com>
 965
 966         * mips-tdep.c (mips_gdbarch_init): For GDB_OSABI_LINUX set
 967         `num_regs' to 90 rather than 79.  Where a target description is
 968         present adjust the setting appropriately.
 969
 970 2016-04-21  Pedro Alves  <palves@redhat.com>
 971
 972         * common/common-exceptions.h (GDB_XCPT_TRY): Add comment.
 973         (GDB_XCPT): Always define as GDB_XCPT_SJMP.
 974
 975 2016-04-21  Pedro Alves  <palves@redhat.com>
 976
 977         * aix-thread.c (pdc_read_data, pdc_write_data): Add cast.
 978         (aix_thread_resume): Use PTRACE_TYPE_ARG5.
 979         * rs6000-nat.c (rs6000_ptrace64): Use PTRACE_TYPE_ARG5.
 980         (rs6000_ptrace_ldinfo): Change type of 'ldi' local to void
 981         pointer, and cast return to gdb_byte pointer.
 982
 983 2016-04-21  Pedro Alves  <palves@redhat.com>
 984
 985         * s390-linux-nat.c (fetch_regset, store_regset, check_regset): Use
 986         void * instead of gdb_byte *.
 987
 988 2016-04-21  Pedro Alves  <palves@redhat.com>
 989
 990         * dwarf2read.c (try_open_dwop_file, open_dwo_file)
 991         (file_file_name, file_full_name): Add char * cast to sentinel in
 992         concat/reconcat calls.
 993         * event-top.c (top_level_prompt): Likewise.
 994         * guile/guile.c (initialize_scheme_side): Likewise.
 995         * linux-tdep.c (linux_fill_prpsinfo): Likewise.
 996         * macrotab.c (macro_source_fullname): Likewise.
 997         * main.c (get_init_files, captured_main): Likewise.
 998         * psymtab.c (psymtab_to_fullname): Likewise.
 999         * python/python.c (_initialize_python)
1000         (gdbpy_finish_initialization): Likewise.
1001         * source.c (symtab_to_fullname): Likewise.
1002
1003 2016-04-20  Pedro Alves  <palves@redhat.com>
1004
1005         * build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Default to yes.
1006         * configure: Renegerate.
1007
1008 2016-04-20  Pedro Alves  <palves@redhat.com>
1009
1010         * darwin-nat.c (darwin_decode_message): Use gdb_signal_from_host.
1011
1012 2016-04-20  Pedro Alves  <palves@redhat.com>
1013
1014         * aarch64-tdep.c (aarch64_record_load_store): Change type of
1015         'reg_rm_val' local to ULONGEST.
1016
1017 2016-04-20  Pedro Alves  <palves@redhat.com>
1018
1019         * darwin-nat.c (darwin_resume_thread): Add uintptr_t cast.
1020
1021 2016-04-20  Doug Evans  <xdje42@gmail.com>
1022
1023         * symmisc.c (dump_symtab_1): Print owning compunit for identical
1024         blockvectors.
1025
1026 2016-04-20  Yao Qi  <yao.qi@linaro.org>
1027
1028         * aarch32-linux-nat.c: Include "arch/arm-linux.h".
1029
1030 2016-04-20  Yao Qi  <yao.qi@linaro.org>
1031
1032         * arm-linux-tdep.h (ARM_CPSR_GREGNUM): Move it to ...
1033         * arch/arm-linux.h: ... here.
1034
1035 2016-04-19  John Baldwin  <jhb@FreeBSD.org>
1036
1037         * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers): Change xstateregs
1038         to void *.
1039         (amd64bsd_store_inferior_registers): Likewise.
1040         * fbsd-nat.c (resume_one_thread_cb): Explicitly cast data to ptid_t *.
1041         (resume_all_threads_cb): Likewise.
1042         * i386bsd-nat.c (i386bsd_supply_gregset): Cast gregs to char *.
1043         (i386bsd_collect_gregset): Likewise.
1044         (i386bsd_fetch_inferior_registers): Change xstateregs to void *.
1045         (i386bsd_store_inferior_registers): Likewise.
1046
1047 2016-04-19  John Baldwin  <jhb@FreeBSD.org>
1048
1049         * main.c (setup_alternate_signal_stack): Cast to char *.
1050
1051 2016-04-19  Doug Evans  <xdje42@gmail.com>
1052
1053         * symmisc.c (dump_symtab_1, dump_symtab): Delete arg objfile.
1054         All callers updated.
1055
1056 2016-04-19  Doug Evans  <xdje42@gmail.com>
1057
1058         PR gdb/17911
1059         * source.c (is_regular_file): New arg errno_ptr.
1060         All callers updated.
1061
1062 2016-04-19  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1063
1064         * linux-record.c (record_linux_system_call): Merge handling for
1065         readlink/recv/read and pipe/pipe2.
1066
1067 2016-04-14  Walfred Tedeschi  <walfred.tedeschi@intel.com>
1068
1069         * features/i386/amd64-mpx-linux.xml: Remove AVX feature.
1070         * features/i386/amd64-mpx.xml: Remove AVX feature.
1071         * features/i386/i386-mpx-linux.xml: Remove AVX feature.
1072         * features/i386/i386-mpx.xml: Remove AVX feature.
1073         * features/i386/amd64-mpx-linux.c: Regenerate.
1074         * features/i386/amd64-mpx.c: Regenerate.
1075         * features/i386/i386-mpx-linux.c: Regenerate.
1076         * features/i386/i386-mpx.c: Regenerate.
1077         * regformats/i386/amd64-mpx-linux.dat: Regenerate.
1078         * regformats/i386/amd64-mpx.dat: Regenerate.
1079         * regformats/i386/i386-mpx-linux.dat: Regenerate.
1080         * regformats/i386/i386-mpx.dat: Regenerate.
1081
1082 2016-04-16  Walfred Tedeschi  <walfred.tedeschi@intel.com>
1083
1084         * amd64-linux-tdep.c (features/i386/amd64-avx-mpx-linux.c):
1085         New include.
1086         (amd64_linux_core_read_description): Add case for
1087          X86_XSTATE_AVX_MPX_MASK.
1088         (_initialize_amd64_linux_tdep): Call initialize_tdesc_amd64_avx_mpx_linux.
1089         * amd64-linux-tdep.h (tdesc_amd64_avx_mpx_linux): New definition.
1090         * amd64-tdep.c (features/i386/amd64-avx-mpx.c): New include.
1091         (amd64_target_description): Add case for  X86_XSTATE_AVX_MPX_MASK.
1092         (_initialize_amd64_tdep): Call initialize_tdesc_amd64_avx_mpx.
1093         * common/x86-xstate.h (X86_XSTATE_MPX_MASK): Remove AVX bits.
1094         (X86_XSTATE_AVX_MPX_MASK): New case.
1095         * features/Makefile (i386/i386-avx-mpx, i386/i386-avx-mpx-linux)
1096         (i386/amd64-avx-mpx, i386/amd64-avx-mpx-linux): New rules.
1097         (i386/i386-avx-mpx-expedite, i386/i386-avx-mpx-linux-expedite)
1098         (i386/amd64-avx-mpx-expedite, i386/amd64-avx-mpx-linux-expedite):
1099         New expedites.
1100         * i386-linux-tdep.c (features/i386/i386-avx-mpx-linux.c): New
1101         include.
1102         (i386_linux_core_read_description): Add case
1103         X86_XSTATE_AVX_MPX_MASK.
1104         (_initialize_i386_linux_tdep): Call
1105         initialize_tdesc_i386_avx_mpx_linux.
1106         * i386-linux-tdep.h (tdesc_i386_avx_mpx_linux): New include.
1107         * i386-tdep.c (features/i386/i386-avx-mpx.c): New include.
1108         (i386_target_description): Add case for X86_XSTATE_AVX_MPX_MASK.
1109         * x86-linux-nat.c (x86_linux_read_description): Add case for
1110         X86_XSTATE_AVX_MPX_MASK.
1111         * features/i386/amd64-avx-mpx-linux.xml: New file.
1112         * features/i386/i386-avx-mpx-linux.xml: New file.
1113         * features/i386/i386-avx-mpx.xml: New file.
1114         * features/i386/amd64-avx-mpx.xml: New file.
1115         * features/i386/amd64-avx-mpx-linux.c: Generated.
1116         * features/i386/amd64-avx-mpx.c: Generated.
1117         * features/i386/i386-avx-mpx-linux.c: Generated.
1118         * features/i386/i386-avx-mpx.c: Generated.
1119         * regformats/i386/amd64-avx-mpx-linux.dat: Generated.
1120         * regformats/i386/amd64-avx-mpx.dat: Generated.
1121         * regformats/i386/i386-avx-mpx-linux.dat: Generated.
1122         * regformats/i386/i386-avx-mpx.dat: Generated.
1123
1124 2016-04-18  Pedro Alves  <palves@redhat.com>
1125
1126         * ptrace.m4 (GDB_AC_PTRACE): Don't run tests in C++ mode.
1127         * configure: Regenerate.
1128
1129 2016-04-18  Martin Galvan  <martin.galvan@tallertechnologies.com>
1130
1131         * valops.c (value_addr): For C++ references, set the copied value's
1132         enclosing_type as well.
1133
1134 2016-04-18  Yao Qi  <yao.qi@linaro.org>
1135
1136         Revert:
1137         2016-04-15  Yao Qi  <yao.qi@linaro.org>
1138
1139         * arm-tdep.c (thumb_stack_frame_destroyed_p): Return zero if
1140         PC is far from the end of function.
1141
1142 2016-04-16  Pedro Alves  <palves@redhat.com>
1143
1144         * ada-exp.y (yydefred): Define as ada_yydefred.
1145
1146 2016-04-15  Pedro Alves  <palves@redhat.com>
1147
1148         * ada-lang.c (ada_lookup_struct_elt_type): Constify 'type_str' and
1149         'name_str' locals.
1150
1151 2016-04-15  Pedro Alves  <palves@redhat.com>
1152
1153         * btrace.c (pt_btrace_insn_flags): Change return type to
1154         btrace_insn_flags.  Use btrace_insn_flags for local.
1155
1156 2016-04-15  Pedro Alves  <palves@redhat.com>
1157
1158         * nat/linux-ptrace.h [__mips__] (GDB_ARCH_IS_TRAP_BRKPT): Also
1159         accept TRAP_BRKPT.
1160          [__mips__] (GDB_ARCH_IS_TRAP_HWBKPT): Also accept TRAP_HWBKPT.
1161
1162 2016-04-15  Yao Qi  <yao.qi@linaro.org>
1163
1164         * arm-tdep.c (thumb_stack_frame_destroyed_p): Return zero if
1165         PC is far from the end of function.
1166
1167 2016-04-14  Pedro Alves  <palves@redhat.com>
1168
1169         * cli/cli-cmds.c (alias_usage_error): New function.
1170         (alias_command): Use it.
1171         * ctf.c (ctf_save_metadata_header): Inline metadata_fmt local in
1172         ctf_save_write_metadata call.
1173
1174 2016-04-14  Pedro Alves  <palves@redhat.com>
1175
1176         * ada-typeprint.c (print_fixed_point_type): Don't pass float as
1177         argument to function expecting LONGEST.
1178         * value.c (unpack_long): Add casts to LONGEST.
1179
1180 2016-04-13  Luis Machado  <lgustavo@codesourcery.com>
1181
1182         * exec.c (exec_file_locate_attach): Guard a couple functions
1183         that can throw errors.
1184         (exception_print_same): New helper function.
1185
1186 2016-04-13  Pedro Alves  <palves@redhat.com>
1187
1188         PR remote/19840
1189         * remote.c (struct remote_state) <last_resume_exec_dir>: New
1190         field.
1191         (new_remote_state): Default last_resume_exec_dir to EXEC_FORWARD.
1192         (remote_open_1): Reset last_resume_exec_dir to EXEC_FORWARD.
1193         (remote_resume): Store the last execution direction.
1194         (remote_execution_direction): New function.
1195         (init_remote_ops): Install it as to_execution_direction target_ops
1196         method.
1197
1198 2016-04-12  Pedro Alves  <palves@redhat.com>
1199
1200         * common/common-exceptions.h (GDB_XCPT_TRY): Update comment.
1201         [__cplusplus] (GDB_XCPT): Define as GDB_XCPT_TRY.
1202
1203 2016-04-12  Pedro Alves  <palves@redhat.com>
1204
1205         * common/common-exceptions.c (struct catcher) <buf>: Now a
1206         'jmp_buf' instead of SIGJMP_BUF.
1207         (exceptions_state_mc_init): Change return type to 'jmp_buf'.
1208         (throw_exception): Use longjmp instead of SIGLONGJMP.
1209         * common/common-exceptions.h: Include <setjmp.h> instead of
1210         "gdb_setjmp.h".
1211         (exceptions_state_mc_init): Change return type to 'jmp_buf'.
1212         [GDB_XCPT == GDB_XCPT_SJMP] (TRY): Use setjmp instead of
1213         SIGSETJMP.
1214         * cp-support.c: Include "gdb_setjmp.h".
1215
1216 2016-04-12  Pedro Alves  <palves@redhat.com>
1217
1218         * common/common-exceptions.c (exception_rethrow): Remove
1219         prepare_to_throw_exception call.
1220         * common/common-exceptions.h (prepare_to_throw_exception): Delete
1221         declaration.
1222         * exceptions.c (prepare_to_throw_exception): Delete.
1223
1224 2016-04-12  Pedro Alves  <palves@redhat.com>
1225
1226         * target.c (target_check_pending_interrupt): Delete.
1227         * target.h (struct target_ops) <to_check_pending_interrupt>:
1228         Remove method.
1229         (target_check_pending_interrupt): Remove declaration.
1230         * target-delegates.c: Regenerate.
1231
1232 2016-04-12  Pedro Alves  <palves@redhat.com>
1233
1234         * defs.h: Update comments on SIGINT handling.
1235         (immediate_quit): Delete declaration.
1236         * event-loop.c (call_async_signal_handler): Delete.
1237         * event-loop.h (call_async_signal_handler): Delete declaration.
1238         (mark_async_signal_handler): Update comments.
1239         (gdb_call_async_signal_handler): Delete declaration.
1240         * event-top.c (handle_sigint): Call mark_async_signal_handler
1241         instead of gdb_call_async_signal_handler.
1242         * exceptions.c (prepare_to_throw_exception): Remove reference to
1243         immediate_quit.
1244         (exception_fprintf): Remove comments about immediate_quit.
1245         * mingw-hdep.c (sigint_event, sigint_handler): Delete.
1246         (gdb_select): Don't wait on sigint_event.
1247         (gdb_call_async_signal_handler): Delete.
1248         (_initialize_mingw_hdep): Delete.
1249         * posix-hdep.c (gdb_call_async_signal_handler): Delete.
1250         * utils.c (immediate_quit): Delete.
1251
1252 2016-04-12  Pedro Alves  <palves@redhat.com>
1253
1254         * defs.h (quit_handler_ftype, quit_handler)
1255         (make_cleanup_override_quit_handler, default_quit_handler): New.
1256         (QUIT): Adjust comments.
1257         * event-top.c (default_quit_handler): New function.
1258         (quit_handler): New global.
1259         (struct quit_handler_cleanup_data): New.
1260         (restore_quit_handler, restore_quit_handler_dtor)
1261         (make_cleanup_override_quit_handler): New.
1262         (async_request_quit): Call QUIT.
1263         * remote.c (struct remote_state) <got_ctrlc_during_io>: New field.
1264         (async_sigint_remote_twice_token, async_sigint_remote_token):
1265         Delete.
1266         (remote_close): Update comments.
1267         (remote_start_remote): Don't set immediate_quit.  Set starting_up
1268         earlier.
1269         (remote_serial_quit_handler, remote_unpush_and_throw): New
1270         functions.
1271         (remote_open_1): Clear got_ctrlc_during_io.  Set
1272         remote_async_terminal_ours_p unconditionally.
1273         (async_initialize_sigint_signal_handler)
1274         (async_handle_remote_sigint, async_handle_remote_sigint_twice)
1275         (remote_check_pending_interrupt, async_remote_interrupt)
1276         (async_remote_interrupt_twice)
1277         (async_cleanup_sigint_signal_handler, ofunc)
1278         (sync_remote_interrupt, sync_remote_interrupt_twice): Delete.
1279         (remote_terminal_inferior, remote_terminal_ours): Remove async
1280         checks.
1281         (remote_wait_as): Don't install a SIGINT handler in sync mode.
1282         (readchar, remote_serial_write): Override the quit handler with
1283         remote_serial_quit_handler.
1284         (getpkt_or_notif_sane_1): Don't call QUIT.
1285         (initialize_remote_ops): Don't install
1286         remote_check_pending_interrupt.
1287         (_initialize_remote): Don't create async_sigint_remote_token and
1288         async_sigint_remote_twice_token.
1289         * ser-base.c (ser_base_wait_for): Call QUIT and use
1290         interruptible_select.
1291         (ser_base_write): Call QUIT.
1292         * ser-go32.c (dos_readchar, dos_write): Call QUIT.
1293         * ser-unix.c (wait_for): Don't use VTIME.  Always take the
1294         gdb_select path, but call QUIT and interruptible_select.
1295         * utils.c (maybe_quit): Call the current quit handler.  Don't call
1296         target_check_pending_interrupt.
1297         (defaulted_query, prompt_for_continue): Override the quit handler
1298         with the default quit handler.
1299
1300 2016-04-12  Pedro Alves  <palves@redhat.com>
1301
1302         * tui/tui-hooks.c (tui_target_has_run): Delete.
1303         (tui_about_to_proceed): Delete.
1304         (tui_about_to_proceed_observer): Delete.
1305         (tui_install_hooks, tui_remove_hooks): Don't install/remove an
1306         about_to_proceed observer.
1307
1308 2016-04-12  Pedro Alves  <palves@redhat.com>
1309
1310         * mi/mi-interp.c (mi_new_thread): Put
1311         target_terminal_ours_for_output in effect while outputting.
1312         (mi_thread_exit): Use target_terminal_ours_for_output instead of
1313         target_terminal_ours.
1314         (mi_record_changed, mi_inferior_added, mi_inferior_appeared)
1315         (mi_inferior_exit, mi_inferior_removed, mi_traceframe_changed)
1316         (mi_tsv_created, mi_tsv_deleted, mi_tsv_modified)
1317         (mi_breakpoint_created, mi_breakpoint_deleted)
1318         (mi_breakpoint_modified, mi_solib_loaded, mi_solib_unloaded)
1319         (mi_command_param_changed, mi_memory_changed)
1320         (report_initial_inferior): Use target_terminal_ours_for_output
1321         instead of target_terminal_ours.  Restore terminal settings.
1322         * mi/mi-main.c (mi_execute_command): Use
1323         target_terminal_ours_for_output instead of target_terminal_ours.
1324         Restore terminal settings.
1325
1326 2016-04-12  Pedro Alves  <palves@redhat.com>
1327
1328         PR gdb/19828
1329         * gnu-nat.c (inf_validate_task_sc): Don't call
1330         target_terminal_ours / target_terminal_inferior around query.
1331         * i386-tdep.c (i386_record_lea_modrm, i386_process_record): Don't
1332         call target_terminal_ours / target_terminal_inferior around
1333         yquery.
1334         * linux-record.c (record_linux_system_call): Don't call
1335         target_terminal_ours / target_terminal_inferior around yquery.
1336         * nto-procfs.c (interrupt_query): Don't call target_terminal_ours
1337         / target_terminal_inferior around query.
1338         * record-full.c (record_full_check_insn_num): Remove
1339         'set_terminal' parameter.  Don't call target_terminal_ours /
1340         target_terminal_inferior around query.
1341         (record_full_message, record_full_registers_change)
1342         (record_full_xfer_partial): Adjust.
1343         * remote.c (interrupt_query): Don't call target_terminal_ours /
1344         target_terminal_inferior around query.
1345         * utils.c (defaulted_query): Install cleanup to restore target
1346         terminal.  Put target_terminal_ours_for_output in effect while
1347         defaulted producing, and target_terminal_ours in in effect while
1348         handling input.
1349         (prompt_for_continue): Install cleanup to restore target terminal.
1350         Put target_terminal_ours in in effect while handling input.
1351
1352 2016-04-12  Pedro Alves  <palves@redhat.com>
1353
1354         * utils.c (defaulted_query, prompt_for_continue): Free temporary
1355         strings with cleanups, instead of xfree.
1356
1357 2016-04-12  Pedro Alves  <palves@redhat.com>
1358
1359         * utils.c (vwarning, internal_vproblem): Use
1360         make_cleanup_restore_target_terminal and
1361         target_terminal_ours_for_output.
1362
1363 2016-04-12  Pedro Alves  <palves@redhat.com>
1364
1365         * infcmd.c (post_create_inferior, prepare_one_step): Use
1366         target_terminal_ours_for_output instead of target_terminal_ours.
1367
1368 2016-04-12  Pedro Alves  <palves@redhat.com>
1369
1370         * exceptions.c (print_flush): Use target_terminal_ours_for_output
1371         instead of target_terminal_ours, and restore target terminal with
1372         a cleanup.
1373
1374 2016-04-12  Pedro Alves  <palves@redhat.com>
1375
1376         * cp-support.c (gdb_demangle): Use target_terminal_ours_for_output
1377         instead of target_terminal_ours, and restore target terminal with
1378         a cleanup.
1379
1380 2016-04-12  Pedro Alves  <palves@redhat.com>
1381
1382         * ada-lang.c (type_as_string, type_as_string_and_cleanup): New
1383         functions.
1384         (ada_lookup_struct_elt_type): Use type_as_string_and_cleanup.
1385
1386 2016-04-12  Pedro Alves  <palves@redhat.com>
1387
1388         * ser-base.c (fd_event): Retry read_prim on EINTR.
1389         (do_ser_base_readchar): Retry read_prim on EINTR.
1390         (ser_base_write): Retry write_prim on EINTR.
1391         * ser-unix.c (ser_unix_read_prim): Don't retry on EINTR here.
1392         (ser_unix_write_prim): Remove comment.
1393
1394 2016-04-12  Pedro Alves  <palves@redhat.com>
1395
1396         * remote.c (remote_pass_ctrlc): New function.
1397         (init_remote_ops): Install it.
1398         * target.c (target_terminal_inferior): Pass pending Ctrl-C to the
1399         target.
1400         (target_pass_ctrlc, default_target_pass_ctrlc): New functions.
1401         * target.h (struct target_ops) <to_pass_ctrlc>: New method.
1402         (target_pass_ctrlc, default_target_pass_ctrlc): New declarations.
1403         * target-delegates.c: Regenerate.
1404
1405 2016-04-12  Pedro Alves  <palves@redhat.com>
1406
1407         * infcmd.c (interrupt_target_1): Call target_stop is in non-stop
1408         mode.
1409         * linux-nat.c (linux_nat_interrupt): Delete.
1410         (linux_nat_add_target): Don't install linux_nat_interrupt.
1411         * remote.c (remote_interrupt_ns): Change return type to void.
1412         Throw error if interrupting the target is not supported.
1413         (remote_interrupt): Don't call the remote_stop_ns/remote_stop_as.
1414
1415 2016-04-12  Pedro Alves  <palves@redhat.com>
1416
1417         * defs.h (clear_quit_flag): Remove declaration.
1418         * extension-priv.h (struct extension_language_ops)
1419         <clear_quit_flag>: Remove field and update comments.
1420         * extension.c (clear_quit_flag): Delete.
1421         * guile/guile.c (guile_extension_ops): Adjust.
1422         * python/python.c (python_extension_ops): Adjust.
1423         (gdbpy_clear_quit_flag): Delete.
1424
1425 2016-04-12  Pedro Alves  <palves@redhat.com>
1426
1427         * main.c (captured_main): Don't clear the quit flag.
1428
1429 2016-04-12  Pedro Alves  <palves@redhat.com>
1430
1431         * exceptions.c (prepare_to_throw_exception): Don't clear the quit
1432         flag.
1433
1434 2016-04-12  Pedro Alves  <palves@redhat.com>
1435
1436         * event-top.c (command_handler): Don't call clear_quit_flag.
1437
1438 2016-04-12  Pedro Alves  <palves@redhat.com>
1439
1440         * remote-sim.c (gdb_os_poll_quit): Don't call clear_quit_flag.
1441         * remote.c (remote_wait_as): Don't call clear_quit_flag.
1442
1443 2016-04-12  Pedro Alves  <palves@redhat.com>
1444
1445         * python/python.c: Include "ser-event.h".
1446         (gdbpy_event_fds): Delete.
1447         (gdbpy_serial_event): New.
1448         (gdbpy_run_events): Change prototype.  Use serial_event_clear
1449         instead of serial_readchar.
1450         (gdbpy_post_event): Use serial_event_set instead of serial_write.
1451         (gdbpy_initialize_events): Use make_serial_event instead of
1452         serial_pipe.
1453
1454 2016-04-12  Pedro Alves  <palves@redhat.com>
1455
1456         * defs.h: Extend QUIT-related comments to mention
1457         interruptible_select.
1458         (quit_serial_event_set, quit_serial_event_clear): Declare.
1459         * event-top.c: Include "ser-event.h" and "gdb_select.h".
1460         (quit_serial_event): New global.
1461         (async_init_signals): Make quit_serial_event.
1462         (quit_serial_event_set, quit_serial_event_clear)
1463         (quit_serial_event_fd, interruptible_select): New functions.
1464         * extension.c (set_quit_flag): Set the quit serial event.
1465         (check_quit_flag): Clear the quit serial event.
1466         * gdb_select.h (interruptible_select): New declaration.
1467         * guile/scm-ports.c (ioscm_input_waiting): Use
1468         interruptible_select instead of gdb_select.
1469         * top.c (gdb_readline_no_editing): Likewise.
1470         * ui-file.c (stdio_file_read): Likewise.
1471
1472 2016-04-12  Pedro Alves  <palves@redhat.com>
1473
1474         * event-loop.c: Include "ser-event.h".
1475         (async_signal_handlers_serial_event): New global.
1476         (async_signals_handler, initialize_async_signal_handlers): New
1477         functions.
1478         (mark_async_signal_handler): Set
1479         async_signal_handlers_serial_event.
1480         (invoke_async_signal_handlers): Clear
1481         async_signal_handlers_serial_event.
1482         * event-top.c (async_init_signals): Call
1483         initialize_async_signal_handlers.
1484
1485 2016-04-12  Pedro Alves  <palves@redhat.com>
1486
1487         * Makefile.in (SFILES): Add ser-event.c.
1488         (HFILES_NO_SRCDIR): Add ser-event.h.
1489         (COMMON_OBS): Add ser-event.o.
1490         * ser-event.c, ser-event.h: New files.
1491         * serial.c (new_serial): New function, factored out from
1492         (serial_fdopen_ops): ... this.
1493         (serial_open_ops_1): New function, factored out from
1494         (serial_open): ... this.
1495         (serial_open_ops): New function.
1496         * serial.h (struct serial): Forware declare.
1497         (serial_open_ops): New declaration.
1498
1499 2016-04-12  Pedro Alves  <palves@redhat.com>
1500
1501         * serial.c (serial_open, serial_fdopen_ops, do_serial_close):
1502         Remove references to name.
1503         * serial.h (struct serial) <name>: Delete.
1504
1505 2016-04-12  Pedro Alves  <palves@redhat.com>
1506
1507         * remote-fileio.c (sigint_fileio_token, remote_fio_no_longjmp):
1508         Delete.
1509         (async_remote_fileio_interrupt): Delete.
1510         (remote_fileio_ctrl_c_signal_handler): Don't call the async signal
1511         handler.  Instead just always set the ctrl_c flag.
1512         (remote_fileio_reply): Clear remote_fio_ctrl_c_flag before
1513         re-enabling the SIGINT handler.
1514         (remote_fileio_func_open, remote_fileio_func_close)
1515         (remote_fileio_func_read, remote_fileio_func_write)
1516         (remote_fileio_func_lseek, remote_fileio_func_rename)
1517         (remote_fileio_func_unlink, remote_fileio_func_stat)
1518         (remote_fileio_func_fstat, remote_fileio_func_gettimeofday)
1519         (remote_fileio_func_isatty, remote_fileio_func_system)
1520         (remote_fileio_request): Remove references to
1521         remote_fio_no_longjmp.
1522         (initialize_remote_fileio): Don't create an async signal handler.
1523
1524 2016-04-12  Pedro Alves  <palves@redhat.com>
1525
1526         * event-top.c (stdin_event_handler): Call QUIT;
1527         (prompt_for_continue): Don't run with immediate_quit set.
1528
1529 2016-04-12  Pedro Alves  <palves@redhat.com>
1530
1531         * tui/tui-io.c (tui_redisplay_readline): Check
1532         gdb_in_secondary_prompt_p instead of immediate_quit.
1533         * tui/tui.c: Include top.h.
1534         (tui_rl_startup_hook): Check gdb_in_secondary_prompt_p instead of
1535         immediate_quit.
1536
1537 2016-04-12  Pedro Alves  <palves@redhat.com>
1538
1539         * top.c (read_command_file): Inline command_loop here.
1540         (command_loop): Delete.
1541
1542 2016-04-12  Pedro Alves  <palves@redhat.com>
1543
1544         * top.c: Include "gdb_select.h".
1545         (gdb_readline_no_editing): Wait for input with gdb_select instead
1546         of blocking in fgetc.
1547         (command_line_input): Don't set immediate_quit.
1548
1549 2016-04-08  Martin Galvan  <martin.galvan@tallertechnologies.com>
1550
1551         * value.c (value_next): Make pass-by-reference parameters const-correct.
1552         (value_parent): Likewise.
1553         (value_enclosing_type): Likewise.
1554         (value_lazy): Likewise.
1555         (value_stack): Likewise.
1556         (value_embedded_offset): Likewise.
1557         (value_pointed_to_offset): Likewise.
1558         (value_raw_address): Likewise.
1559         (deprecated_value_modifiable): Likewise.
1560         (value_free_to_mark): Likewise.
1561         (value_release_to_mark): Likewise.
1562         (internalvar_name): Likewise.
1563         (readjust_indirect_value_type): Likewise.
1564         (value_initialized): Likewise.
1565         * value.h (value_next): Likewise.
1566         (value_parent): Likewise.
1567         (value_enclosing_type): Likewise.
1568         (value_lazy): Likewise.
1569         (value_stack): Likewise.
1570         (value_embedded_offset): Likewise.
1571         (value_pointed_to_offset): Likewise.
1572         (value_raw_address): Likewise.
1573         (deprecated_value_modifiable): Likewise.
1574         (value_free_to_mark): Likewise.
1575         (value_release_to_mark): Likewise.
1576         (internalvar_name): Likewise.
1577         (readjust_indirect_value_type): Likewise.
1578         (value_initialized): Likewise.
1579
1580 2016-04-07  Yao Qi  <yao.qi@linaro.org>
1581
1582         * record-full.c (record_full_insert_breakpoint): Return
1583         early if entry on the address is found in
1584         record_full_breakpoints.
1585
1586 2016-04-07  Yao Qi  <yao.qi@linaro.org>
1587
1588         * record-full.c (record_full_insert_breakpoint): Set
1589         bp_tgt->reqstd_address and bp_tgt->placed_size.
1590
1591 2016-04-06  Don Breazeal  <donb@codesourcery.com>
1592
1593         * value.c (value_actual_type): Don't try to get rtti type
1594         of the value if it has been optimized out.
1595         (value_optimized_out): If a memory access error occurs,
1596         just check vaue->optimized_out.
1597
1598 2016-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
1599
1600         Revert the previous commit adding unknown_v_replies_ok.
1601
1602 2016-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
1603
1604         * remote.c (struct remote_state): New field unknown_v_replies_ok.
1605         (packet_config_support): Read it.
1606         (remote_start_remote): Set it.
1607
1608 2016-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
1609
1610         * remote.c: Revert check-in by a mistake in the previous commit.
1611
1612 2016-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
1613             Pedro Alves  <palves@redhat.com>
1614
1615         * exec.c (exec_file_locate_attach): Print warning for unsupported
1616         target_pid_to_exec_file.
1617         * symfile-mem.c (add_vsyscall_page): Remove the "file" command
1618         message part.
1619
1620 2016-04-04  Simon Marchi  <simon.marchi@ericsson.com>
1621
1622         * cli/cli-decode.c (help_cmd_list): Fix function doc and remove
1623         trailing spaces.
1624
1625 2016-04-01  Artemiy Volkov  <artemiyv@acm.org>
1626
1627         PR gdb/19820
1628         * eval.c (evaluate_subexp_standard): Allow TYPE_CODE_ENUM to be
1629         the type of BINOP_REPEAT's second operand.
1630
1631 2016-03-31  Yichao Yu  <yyc1992@gmail.com>
1632
1633         PR gdb/19858
1634         * jit.c (jit_breakpoint_re_set_internal): Return 0 if we already
1635         got the breakpoint at the right address.
1636         (jit_inferior_created): New function.
1637         (_initialize_jit): Install jit_inferior_created as
1638         inferior_created observer.
1639
1640 2016-03-31  Marcin Kościelnicki  <koriakin@0x04.net>
1641
1642         * NEWS: Mention support for tracepoints on powerpc*-linux.
1643
1644 2016-03-31  Catalin Udma  <catalin.udma@freescale.com>
1645
1646         PR python/19743
1647         * python/python.c (execute_gdb_command): Use console uiout
1648         when executing gdb command.
1649         * utils.c (restore_ui_out_closure): New structure.
1650         (do_restore_ui_out): New function.
1651         (make_cleanup_restore_ui_out): Likewise.
1652         * utils.h (make_cleanup_restore_ui_out): Declare.
1653
1654 2016-03-31  Pedro Alves  <palves@redhat.com>
1655
1656         * NEWS: Mention that support for "target m32rsdi", "target mips",
1657         "target pmon", "target ddb", "target rockhopper", and "target lsi"
1658         was removed.
1659         * Makefile.in (ALL_TARGET_OBS): Remove remote-m32r-sdi.o and
1660         remote-mips.o.
1661         (ALLDEPFILES): Remove remote-m32r-sdi.c and remote-mips.c.
1662         * configure.tgt: Remove all references to remote-m32r-sdi.o and
1663         remote-mips.o.
1664         * mips-tdep.c (deprecated_mips_set_processor_regs_hack): Delete
1665         function.
1666         * mips-tdep.h (deprecated_mips_set_processor_regs_hack): Delete
1667         declaration.
1668         * remote-m32r-sdi.c, remote-mips.c: Delete files.
1669         * symfile.c (generic_load, generic_load): Remove comments.
1670
1671 2016-03-30  Yao Qi  <yao.qi@linaro.org>
1672
1673         * arm-tdep.c (arm_epilogue_frame_this_id): Check 'func' against
1674         0 rather than NULL.
1675
1676 2016-03-30  Yao Qi  <yao.qi@linaro.org>
1677
1678         * arm-tdep.c: (arm_make_epilogue_frame_cache): New function.
1679         (arm_epilogue_frame_this_id): New function.
1680         (arm_epilogue_frame_prev_register): New function.
1681         (arm_epilogue_frame_sniffer): New function.
1682         (arm_epilogue_frame_unwind): New.
1683         (arm_gdbarch_init): Append unwinder arm_epilogue_frame_unwind.
1684
1685 2016-03-30  Yao Qi  <yao.qi@linaro.org>
1686
1687         * arm-tdep.c (arm_stack_frame_destroyed_p): Rename it ...
1688         (arm_stack_frame_destroyed_p_1): ... here.  Don't call
1689         arm_pc_is_thumb.
1690         (arm_stack_frame_destroyed_p): Call
1691         thumb_stack_frame_destroyed_p and
1692         arm_stack_frame_destroyed_p_1.
1693
1694 2016-03-30  Doug Evans  <dje@google.com>
1695
1696         * python/py-utils.c (host_string_to_python_string): New function.
1697         * python/python-internal.h (host_string_to_python_string): Declare it.
1698         * python/py-*.c (*): Update all calls to
1699         PyString_Decode (str, strlen (str), host_charset (), NULL);
1700         to use host_string_to_python_string instead.
1701
1702 2016-03-30  Marcin Kościelnicki  <koriakin@0x04.net>
1703
1704         * remote.c (remote_check_symbols): Allocate own buffer for reply.
1705
1706 2016-03-29  Max Filippov  <jcmvbkbc@gmail.com>
1707
1708         * xtensa-tdep.c (xtensa_frame_cache): Change op1 type to LONGEST.
1709         Use safe_read_memory_integer instead of read_memory_integer.
1710
1711 2016-03-29  Marcin Kościelnicki  <koriakin@0x04.net>
1712
1713         * NEWS: Mention support for tracepoints on s390*-linux.
1714
1715 2016-03-29  Don Breazeal  <donb@codesourcery.com>
1716
1717         * gdb/value.c (value_actual_type): Fix formatting issue.
1718
1719 2016-03-23  Yao Qi  <yao.qi@linaro.org>
1720
1721         * gdbarch.sh (software_single_step): Remove comments.
1722         * gdbarch.h: Regenerated.
1723
1724 2016-03-21  Yao Qi  <yao.qi@linaro.org>
1725
1726         * arm-tdep.c (arm_record_media): New.
1727         (arm_record_ld_st_reg_offset): Call arm_record_media.
1728
1729 2016-03-21  Yao Qi  <yao.qi@linaro.org>
1730
1731         * arm-linux-tdep.c (arm_canonicalize_syscall): Canonicalize
1732         more syscalls.
1733
1734 2016-03-18  Yao Qi  <yao.qi@linaro.org>
1735
1736         * sparc-tdep.c (sparc_software_single_step): Make it static.
1737         * sparc-tdep.h (sparc_software_single_step): Remove declaration.
1738
1739 2016-03-18  Yao Qi  <yao.qi@linaro.org>
1740
1741         * spu-tdep.c (spu_software_single_step): Throw error when
1742         target_read_memory fails.
1743
1744 2016-03-17  Jan Kratochvil  <jan.kratochvil@redhat.com>
1745
1746         * linux-thread-db.c (check_pid_namespace_match): Extend the message.
1747
1748 2016-03-17  Pedro Alves  <palves@redhat.com>
1749             Don Breazeal  <donb@codesourcery.com>
1750
1751         PR remote/19496
1752         * infcmd.c (notice_new_inferior): Use the 'leave_running' argument
1753         instead of checking the 'non_stop' global.
1754         * remote.c (remote_add_thread): New parameter 'executing'.  Use it
1755         to set the new thread's executing state.
1756         (remote_notice_new_inferior): Rename parameter 'running' to
1757         'executing'.  Always set the thread state to THREAD_RUNNING in
1758         non-stop mode, and to THREAD_STOPPED in all-stop mode.  Pass
1759         EXECUTING to remote_add_thread and notice_new_inferior.
1760         (remote_update_thread_list): Update to pass executing state, not
1761         running state.
1762
1763 2016-03-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1764
1765         * syscalls/s390-linux.xml: Add NUMA syscalls and new syscalls up
1766         to 374.
1767         * syscalls/s390x-linux.xml: Likewise.
1768
1769 2016-03-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1770
1771         * linux-record.c (record_mem_at_reg): New helper function.
1772         (record_linux_system_call): Exploit new helper function where
1773         applicable.
1774
1775 2016-03-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1776
1777         * linux-record.c: Fix whitespace issues; tabify, remove trailing
1778         spaces.
1779
1780 2016-03-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1781
1782         * linux-record.c (record_linux_system_call): Add missing return
1783         statements to handling of pipe and pipe2 syscalls.
1784
1785 2016-03-16  Doug Evans  <dje@google.com>
1786
1787         * xml-tdesc.c (tdesc_start_enum): Fix c++ build.
1788
1789 2016-03-16  Yao Qi  <yao.qi@linaro.org>
1790
1791         * arm-linux-tdep.c (arm_linux_init_abi): Fix
1792         arm_linux_record_tdep.arg1, arm_linux_record_tdep.arg2 and
1793         arm_linux_record_tdep.arg3.  Set arm_linux_record_tdep.arg4,
1794         arm_linux_record_tdep.arg5, arm_linux_record_tdep.arg6, and
1795         arm_linux_record_tdep.arg7.
1796
1797 2016-03-15  Keith Seitz  <keiths@redhat.com>
1798
1799         PR breakpoints/18303
1800         * cp-namespace.c (cp_lookup_bare_symbol): Change assertion to
1801         look for "::" instead of simply ":".
1802         (cp_search_static_and_baseclasses): Return null_block_symbol for
1803         malformed input.
1804         Remove assertions.
1805         * cp-support.c (cp_find_first_component_aux): Do not return
1806         a prefix length for ':' unless the next character is also ':'.
1807
1808 2016-03-15  Doug Evans  <dje@google.com>
1809
1810         * features/aarch64-core.xml (cpsr_flags): New flags type.
1811         (cpsr): Use it.
1812         * features/aarch64.c: Regenerate.
1813
1814 2016-03-15  Doug Evans  <dje@google.com>
1815
1816         * features/i386/32bit-core.xml (i386_eflags): Remove "end" spec.
1817         * features/i386/32bit-sse.xml (i386_eflags): Ditto.
1818         * features/i386/64bit-core.xml (i386_eflags): Ditto.
1819         * features/i386/64bit-sse.xml (i386_eflags): Ditto.
1820         * features/i386/x32-core.xml (i386_eflags): Ditto.
1821
1822 2016-03-15  Doug Evans  <dje@google.com>
1823             Wei-cheng Wang  <cole945@gmail.com>
1824
1825         Extend flags to support multibit and enum bitfields.
1826         * NEWS: Document new features.
1827         * c-typeprint.c (c_type_print_varspec_prefix): Handle TYPE_CODE_FLAGS.
1828         (c_type_print_varspec_suffix, c_type_print_base): Ditto.
1829         * gdbtypes.c (arch_flags_type): Don't assume all fields are one bit.
1830         (append_flags_type_field): New function.
1831         (append_flags_type_flag): Call it.
1832         * gdbtypes.h (append_flags_type_field): Declare.
1833         * target-descriptions.c (struct tdesc_type_flag): Delete.
1834         (enum tdesc_type_kind) <TDESC_TYPE_BOOL>: New enum value.
1835         (enum tdesc_type_kind) <TDESC_TYPE_ENUM>: Ditto.
1836         (struct tdesc_type) <u.f>: Delete.
1837         (tdesc_predefined_types): Add "bool".
1838         (tdesc_predefined_type): New function.
1839         (tdesc_gdb_type): Handle TDESC_TYPE_BOOL, TDESC_TYPE_ENUM.
1840         Update TDESC_TYPE_FLAGS support.
1841         (tdesc_free_type): Handle TDESC_TYPE_ENUM.  Update TDESC_TYPE_FLAGS.
1842         (tdesc_create_flags): Update.
1843         (tdesc_create_enum): New function.
1844         (tdesc_add_field): Initialize start,end to -1.
1845         (tdesc_add_typed_bitfield): New function.
1846         (tdesc_add_bitfield): Call it.
1847         (tdesc_add_flag): Allow TDESC_TYPE_STRUCT.  Update.
1848         (tdesc_add_enum_value): New function.
1849         (maint_print_c_tdesc_cmd): Fold TDESC_TYPE_FLAGS support into
1850         TDESC_TYPE_STRUCT.  Handle TDESC_TYPE_ENUM.
1851         * target-descriptions.h (tdesc_create_enum): Declare.
1852         (tdesc_add_typed_bitfield, tdesc_add_enum_value): Declare.
1853         * valprint.c (generic_val_print_enum_1): New function.
1854         (generic_val_print_enum): Call it.
1855         (val_print_type_code_flags): Make static.  Handle multibit bitfields
1856         and enum bitfields.
1857         * valprint.h (val_print_type_code_flags): Delete.
1858         * xml-tdesc.c (struct tdesc_parsing_data) <current_type_is_flags>:
1859         Delete.  All uses removed.
1860         (tdesc_start_enum): New function.
1861         (tdesc_start_field): Handle multibit and enum bitfields.
1862         (tdesc_start_enum_value): New function.
1863         (enum_value_attributes, enum_children, enum_attributes): New static
1864         globals.
1865         (feature_children): Add "enum".
1866         * features/gdb-target.dtd (enum, evalue): New elements.
1867
1868 2016-03-15  Doug Evans  <dje@google.com>
1869
1870         * target-descriptions.c (struct tdesc_type) <u.u.size>: Change type
1871         from LONGEST to int.
1872         (struct tdesc_type) <u.f.size>: Ditto.
1873         (tdesc_set_struct_size): Change type of "size" arg from LONGEST
1874         to int.  Add assertion size > 0.
1875         (tdesc_create_flags): Ditto.
1876         * target-descriptions.h (tdesc_set_struct_size): Update.
1877         (tdesc_create_flags): Update.
1878         * xml-tdesc.c (MAX_FIELD_SIZE, MAX_FIELD_BITSIZE): New macros.
1879         (MAX_VECTOR_SIZE): New macro.
1880         (tdesc_start_struct): Catch conversion errors from LONGEST to int.
1881         (tdesc_start_flags, tdesc_start_field, tdesc_start_vector): Ditto.
1882
1883 2016-03-15  Doug Evans  <dje@google.com>
1884
1885         * target-descriptions.c (maint_print_c_tdesc_cmd): Use "type" for
1886         TYPE_CODE_FLAGS instead of "field_type", for consistency.
1887         * features/i386/amd64-avx-linux.c: Regenerate.
1888         * features/i386/amd64-avx.c: Regenerate.
1889         * features/i386/amd64-avx512-linux.c: Regenerate.
1890         * features/i386/amd64-avx512.c: Regenerate.
1891         * features/i386/amd64-linux.c: Regenerate.
1892         * features/i386/amd64-mpx-linux.c: Regenerate.
1893         * features/i386/amd64-mpx.c: Regenerate.
1894         * features/i386/amd64.c: Regenerate.
1895         * features/i386/i386-avx-linux.c: Regenerate.
1896         * features/i386/i386-avx.c: Regenerate.
1897         * features/i386/i386-avx512-linux.c: Regenerate.
1898         * features/i386/i386-avx512.c: Regenerate.
1899         * features/i386/i386-linux.c: Regenerate.
1900         * features/i386/i386-mmx-linux.c: Regenerate.
1901         * features/i386/i386-mmx.c: Regenerate.
1902         * features/i386/i386-mpx-linux.c: Regenerate.
1903         * features/i386/i386-mpx.c: Regenerate.
1904         * features/i386/i386.c: Regenerate.
1905         * features/i386/x32-avx-linux.c: Regenerate.
1906         * features/i386/x32-avx.c: Regenerate.
1907         * features/i386/x32-avx512-linux.c: Regenerate.
1908         * features/i386/x32-avx512.c: Regenerate.
1909         * features/i386/x32-linux.c: Regenerate.
1910         * features/i386/x32.c: Regenerate.
1911
1912 2016-03-15  Pedro Alves  <palves@redhat.com>
1913
1914         PR gdb/19676
1915         * linux-thread-db.c (try_thread_db_load_1): Leave
1916         info->td_ta_thr_iter_p NULL iff debugging a live process and we
1917         have /proc access.
1918         (find_new_threads_once): Assert that we have a non-NULL
1919         info->td_ta_thr_iter_p instead of checking whether the target has
1920         execution.
1921
1922 2016-03-15  Pedro Alves  <palves@redhat.com>
1923
1924         PR gdb/19676
1925         * infrun.c (displaced_step_prepare): Also disable displaced
1926         stepping on NOT_SUPPORTED_ERROR.
1927         * linux-tdep.c (linux_displaced_step_location): If reading auxv
1928         fails, throw NOT_SUPPORTED_ERROR instead of generic error.
1929
1930 2016-03-13  Marcin Kościelnicki  <koriakin@0x04.net>
1931
1932         * s390-linux-tdep.c (s390_gen_return_address): New function.
1933         (s390_gdbarch_init): Fill gen_return_address hook.
1934
1935 2016-03-11  Andrew Burgess  <andrew.burgess@embecosm.com>
1936
1937         * symmisc.c (maintenance_info_line_tables): New function.
1938         (maintenance_print_one_line_table): New function.
1939         (_initialize_symmisc): Register 'maint info line-table' command.
1940         * NEWS: Mention new command.
1941
1942 2016-03-11  Marcin Kościelnicki  <koriakin@0x04.net>
1943
1944         * s390-linux-tdep.c (s390_ax_pseudo_register_collect): New function.
1945         (s390_ax_pseudo_register_push_stack): New function.
1946         (s390_gdbarch_init): Fill ax_pseudo_register_collect and
1947         ax_pseudo_register_push_stack hooks.
1948
1949 2016-03-10  Simon Marchi  <simon.marchi@polymtl.ca>
1950
1951         * data-directory/Makefile.in (PYTHON_FILE_LIST): Install
1952         gdb/function/as_string.py.
1953         * python/lib/gdb/function/as_string.py: New file.
1954         * NEWS: Mention the new $_as_string function.
1955
1956 2016-03-09  Jose E. Marchesi  <jose.marchesi@oracle.com>
1957
1958         * target.h: Fix doc string of target_can_use_hardware_watchpoint.
1959
1960 2016-03-09  Pedro Alves  <palves@redhat.com>
1961
1962         * event-top.c (more_to_come): Delete.
1963         (struct readline_input_state): Delete.
1964         (readline_input_state): Delete.
1965         (get_command_line_buffer): New function.
1966         (command_handler): Update comments.  Don't handle NULL commands
1967         here.  Do not execute commented lines.
1968         (command_line_append_input_line): New function.
1969         (handle_line_of_input): New function, partly based on
1970         command_line_handler and command_line_input.
1971         (command_line_handler): Rewrite.
1972         * event-top.h (command_handler): New declaration.
1973         (command_loop): Defer command execution to command_handler.
1974         (command_line_input): Update comments.  Simplify, using struct
1975         buffer and handle_line_of_input.
1976         * top.h (struct buffer): New forward declaration.
1977         (handle_line_of_input): New declaration.
1978
1979 2016-03-09  Pedro Alves  <palves@redhat.com>
1980
1981         * event-top.c (command_line_handler): Use xfree + xstrdup instead
1982         of xrealloc + strcpy.
1983         * main.c (captured_main): Use xstrdup instead of xmalloc plus
1984         manual clear.
1985         * top.c (saved_command_line): Rewrite comment.
1986         (saved_command_line_size): Delete.
1987         (command_line_input): Use xfree + xstrdup instead of xrealloc +
1988         strcpy.
1989         * top.h (saved_command_line_size): Delete declaration.
1990
1991 2016-03-09  Pedro Alves  <palves@redhat.com>
1992
1993         * event-top.c: Include buffer.h.
1994         (gdb_readline_no_editing_callback): Use struct buffer instead
1995         of xrealloc.
1996
1997 2016-03-09  Pedro Alves  <palves@redhat.com>
1998
1999         * common/buffer.h (buffer_grow_char): New function.
2000         * top.c: Include buffer.h.
2001         (gdb_readline_no_editing): Rename 'prompt_arg' parameter to
2002         'prompt'.  Use struct buffer instead of xrealloc.
2003
2004 2016-03-09  Pedro Alves  <palves@redhat.com>
2005
2006         * defs.h (gdb_readline): Delete declaration.
2007         * top.c (gdb_readline): Rename to ...
2008         (gdb_readline_no_editing): ... this, and make static.
2009
2010 2016-03-09  Pedro Alves  <palves@redhat.com>
2011
2012         * utils.c (prompt_for_continue): Update comments.
2013
2014 2016-03-09  Pedro Alves  <palves@redhat.com>
2015
2016         * event-top.c (async_annotation_suffix): Delete.
2017         (top_level_prompt, command_line_handler): Don't use
2018         'async_annotation_suffix' and simplify.
2019         * event-top.h (async_annotation_suffix): Delete declaration.
2020         (init_main): Remove reference to 'async_annotation_suffix'.
2021
2022 2016-03-09  Pedro Alves  <palves@redhat.com>
2023
2024         * event-top.c (gdb_readline2): Rename to ...
2025         (gdb_readline_no_editing_callback): ... this.
2026         (change_line_handler, stdin_event_handler)
2027         (gdb_setup_readline): Adjust.
2028         * event-top.h (gdb_readline2): Rename to ...
2029         (gdb_readline_no_editing_callback): ... this, and move closer to
2030         other readline-related declarations.
2031         * mi/mi-interp.c (mi_interpreter_resume): Adjust.
2032
2033 2016-03-09  Pedro Alves  <palves@redhat.com>
2034
2035         * top.c (window_hook): Delete.
2036         (command_loop): Remove references to window_hook.
2037
2038 2016-03-09  Marcin Kościelnicki  <koriakin@0x04.net>
2039
2040         * corefile.c (safe_read_memory_unsigned_integer): New function.
2041         * gdbcore.h (safe_read_memory_unsigned_integer): New prototype.
2042         * rs6000-tdep.c (rs6000_frame_cache): Read backchain as unsigned.
2043
2044 2016-03-09  Marcin Kościelnicki  <koriakin@0x04.net>
2045
2046         * rs6000-tdep.c: Add "ax.h" and "ax-gdb.h" includes.
2047         (rs6000_gen_return_address): New function.
2048         (rs6000_gdbarch_init): Wire in the above.
2049
2050 2016-03-09  Marcin Kościelnicki  <koriakin@0x04.net>
2051
2052         * rs6000-tdep.c (rs6000_ax_pseudo_register_collect): New function.
2053         (rs6000_gdbarch_init): Wire in the above.
2054
2055 2016-03-09  Andreas Arnez  <arnez@linux.vnet.ibm.com>
2056
2057         * s390-linux-tdep.c (s390_analyze_prologue): Ignore BRC and BRCL
2058         instructions that do nothing or are conditional traps.
2059
2060 2016-03-09  Andreas Arnez  <arnez@linux.vnet.ibm.com>
2061
2062         * s390-linux-tdep.c (s390_prologue_frame_unwind_cache): Store
2063         frame func's PC in info->func before any other failure can occur.
2064         (s390_frame_this_id): Use frame_id_build_unavailable_stack if
2065         info->func has been filled out.
2066
2067 2016-03-09  Pedro Alves  <palves@redhat.com>
2068
2069         * osabi.c (gdb_osabi_names): Avoid spaces in osabi names.
2070
2071 2016-03-09  Pedro Alves  <palves@redhat.com>
2072
2073         * frv-tdep.c (frv_gdbarch_init): Handle bfd_mach_fr300.
2074
2075 2016-03-09  Pedro Alves  <palves@redhat.com>
2076
2077         * cris-tdep.c (cris_gdbarch_init): Return 0 if the info's byte
2078         order is BFD_ENDIAN_BIG or if the cris version is unsupported.
2079
2080 2016-03-09  Pedro Alves  <palves@redhat.com>
2081
2082         * doublest.c: Extend comments.
2083         (floatformat_to_doublest, floatformat_from_doublest): Copy the
2084         floatformat's total size, not the host type's size.
2085
2086 2016-03-09  Pedro Alves  <palves@redhat.com>
2087
2088         * doublest.c (floatformat_totalsize_bytes): New function.
2089         (floatformat_from_type): Assert that the type's length is at least
2090         as long as the floatformat's totalsize.
2091         * doublest.h (floatformat_totalsize_bytes): New declaration.
2092         * gdbtypes.c (arch_float_type): Assert that the type's length is
2093         at least as long as the floatformat's totalsize.
2094
2095 2016-03-09  Pedro Alves  <palves@redhat.com>
2096
2097         * hppa-linux-tdep.c (hppa_linux_init_abi): Set the long double
2098         format to floatformats_ieee_double.
2099
2100 2016-03-07  Pedro Alves  <palves@redhat.com>
2101
2102         * mips-tdep.c (mips_gdbarch_init): Check whether info.abfd is NULL
2103         before calling bfd_get_flavour.
2104
2105 2016-03-05  Pitchumani Sivanupandi  <pitchumani.s@atmel.com>
2106
2107         * avr-tdep.c (AVR_LAST_ARG_REGNUM): Define.
2108         (avr_push_dummy_call): Correct last needed argument register.
2109         Write MSB of argument into register and subsequent bytes into
2110         other registers in decreasing order.
2111
2112 2016-03-04  Yao Qi  <yao.qi@linaro.org>
2113
2114         * arm-tdep.c (arm_record_vdata_transfer_insn): Simplify the
2115         condition check.  Record the right D register number.
2116
2117 2016-03-04  Yao Qi  <yao.qi@linaro.org>
2118
2119         * arm-tdep.c (arm_record_extension_space): Remove code
2120         printing "Process record does not support".
2121         (arm_record_data_proc_misc_ld_str): Likewise.
2122         (decode_insn): Call arm_record_extension_space if condition
2123         is 0xf.  Call arm_record_unsupported_insn if ret isn't
2124         ARM_RECORD_SUCCESS.  Use 'ret' instead of 'insn_id' to hold
2125         the value of thumb2_record_decode_insn_handler.
2126
2127 2016-03-04  Simon Marchi  <simon.marchi@ericsson.com>
2128
2129         * features/feature_to_c.sh: Print the help when passing no
2130         argument.
2131
2132 2016-03-02  Bernhard Heckel  <bernhard.heckel@intel.com>
2133
2134         * MAINTAINERS (Write After Approval): Add Bernhard Heckel.
2135
2136 2016-03-02  Bernhard Heckel  <bernhard.heckel@intel.com>
2137
2138         * dwarf2read.c (new_symbol_full): Fix detection of gfortran compilers.
2139
2140 2016-03-01  Andreas Arnez  <arnez@linux.vnet.ibm.com>
2141
2142         * s390-linux-tdep.c (s390_backchain_frame_unwind_cache): Avoid
2143         exception when attempting to access the inferior's backchain.
2144
2145 2016-02-29  Yao Qi  <yao.qi@linaro.org>
2146
2147         * aarch64-linux-tdep.c (aarch64_canonicalize_syscall): Support
2148         eventfd2, eventfd2, dup3, inotify_init1, fallocate and pipe2.
2149         Return gdb_sys_epoll_create1 instead of gdb_sys_epoll_create
2150         for aarch64_sys_epoll_create1.
2151
2152 2016-02-29  Yao Qi  <yao.qi@linaro.org>
2153
2154         * linux-record.h (enum gdb_syscall) <gdb_sys_fallocate>: New.
2155         <gdb_sys_eventfd2, gdb_sys_epoll_create1, gdb_sys_dup3>: New.
2156         <gdb_sys_pipe2, gdb_sys_inotify_init1>: New.
2157         * linux-record.c (record_linux_system_call): Handle them.
2158
2159 2016-02-28  Iain Buclaw  <ibuclaw@gdcproject.org>
2160
2161         * d-namespace.c (d_lookup_symbol_imports): Avoid recursive lookups from
2162         cyclic imports.
2163
2164 2016-02-26  Keith Seitz  <keiths@redhat.com>
2165
2166         * rs6000-tdep.c (rs6000_frame_cache): Explicitly cast return result
2167         to avoid invalid conversion from void *.
2168
2169 2016-02-26  Yao Qi  <yao.qi@linaro.org>
2170
2171         * arm-tdep.c (arm_record_exreg_ld_st_insn): Set 'single_reg'
2172         per bit 8.  Check bit 20 instead of bit 4 for VMOV
2173         instruction.  Record D registers for instructions changing
2174         S registers.  Change of the order of length and address
2175         in record_buf_mem array.
2176
2177 2016-02-26  Yao Qi  <yao.qi@linaro.org>
2178
2179         * arm-tdep.c (thumb_record_ld_st_reg_offset): Fix the register
2180         number of Rd.
2181
2182 2016-02-25  Doug Evans  <dje@google.com>
2183
2184         * remote-m32r-sdi.c (recv_char_data): Initialize val to avoid
2185         compiler warning.
2186         (recv_long_data): Ditto.
2187
2188 2016-02-25  Simon Marchi  <simon.marchi@ericsson.com>
2189
2190         * i386-linux-tdep.c (i386_linux_handle_segmentation_fault):
2191         Initialize variables.
2192
2193 2016-02-25  Antoine Tremblay  <antoine.tremblay@ericsson.com>
2194
2195         * ax-general.c (ax_reg): Call gdbarch_remote_register_number.
2196         (ax_reg_mask): Likewise.
2197
2198 2016-02-24  Pedro Alves  <palves@redhat.com>
2199
2200         * linux-nat.c (save_sigtrap) Delete.
2201         (stop_wait_callback): Call save_stop_reason instead of
2202         save_sigtrap.
2203         (check_stopped_by_breakpoint): Rename to ...
2204         (save_stop_reason): ... this.  Bits of save_sigtrap folded here.
2205         Use GDB_ARCH_IS_TRAP_HWBKPT and handle ambiguous
2206         GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT.  Factor out
2207         common code between the USE_SIGTRAP_SIGINFO and
2208         !USE_SIGTRAP_SIGINFO blocks.
2209         (linux_nat_filter_event): Call save_stop_reason instead of
2210         save_sigtrap.
2211         * nat/linux-ptrace.h: Check for both SI_KERNEL and TRAP_BRKPT
2212         si_code for MIPS.
2213         * nat/linux-ptrace.h: Fix "TRAP_HWBPT" typo in x86 table.  Add
2214         comments on MIPS behavior.
2215         (GDB_ARCH_IS_TRAP_HWBKPT): Define for all archs.
2216
2217 2016-02-24  Marcin Kościelnicki  <koriakin@0x04.net>
2218
2219         * rs6000-tdep.c (rs6000_frame_cache): Initialize frame and pc to 0
2220         to avoid spurious warnings.
2221
2222 2016-02-24  Gary Benson  <gbenson@redhat.com>
2223
2224         * exec.c (exec_file_locate_attach): Do not attempt to
2225         locate main executable locally if not found in sysroot.
2226
2227 2016-02-24  Joel Brobecker  <brobecker@adacore.com>
2228
2229         GDB 7.11 released.
2230
2231 2016-02-24  Wei-cheng Wang  <cole945@gmail.com>
2232
2233         * rs6000-tdep.c (rs6000_frame_cache, rs6000_frame_this_id): Handle
2234         unavailable PC/SP to build unavailable frame.
2235
2236 2016-02-23  Doug Evans  <dje@google.com>
2237
2238         Extend "skip" command to support -file, -gfile, -function, -rfunction.
2239         * NEWS: Document new features.
2240         * skip.c: #include "fnmatch.h", "gdb_regex.h".
2241         (skiplist_entry) <file>: Renamed from filename.
2242         <function>: Renamed from function_name.
2243         <file_is_glob, function_is_regexp>: New members.
2244         <compiled_function_regexp, compiled_function_regexp_is_valid>:
2245         New members.
2246         (make_skip_entry): New function.
2247         (free_skiplist_entry, free_skiplist_entry_cleanup): New functions.
2248         (make_free_skiplist_entry_cleanup): New function.
2249         (skip_file_command): Update.
2250         (skip_function, skip_function_command): Update.
2251         (compile_skip_regexp): New functions.
2252         (skip_command): Add support for new options.
2253         (skip_info): Update.
2254         (skip_file_p, skip_gfile_p): New functions.
2255         (skip_function_p, skip_rfunction_p): New functions.
2256         (function_name_is_marked_for_skip): Update and simplify.
2257         (_initialize_step_skip): Update.
2258         * symtab.c: #include "fnmatch.h".
2259         (compare_glob_filenames_for_search): New function.
2260         * symtab.h (compare_glob_filenames_for_search): Declare.
2261         * utils.c (count_path_elements): New function.
2262         (strip_leading_path_elements): New function.
2263         * utils.h (count_path_elements): Declare.
2264         (strip_leading_path_elements): Declare.
2265
2266 2016-02-23  Simon Marchi  <simon.marchi@ericsson.com>
2267
2268         * arm-tdep.c (arm_decode_svc_copro): Remove "to" parameter.
2269         (thumb_process_displaced_insn): Likewise.
2270         (arm_process_displaced_insn): Adjust calls.
2271
2272 2016-02-23  Yao Qi  <yao.qi@linaro.org>
2273
2274         * aarch64-linux-tdep.c (enum aarch64_syscall) <aarch64_sys_mknod>:
2275         Remove.
2276         <aarch64_sys_mkdir, aarch64_sys_unlink, aarch64_sys_symlink>: Remove.
2277         <aarch64_sys_link, aarch64_sys_rename, aarch64_sys_faccess>: Remove.
2278         <aarch64_sys_mknodat, aarch64_sys_mkdirat>: New.
2279         <aarch64_sys_unlinkat, aarch64_sys_symlinkat>: New.
2280         <aarch64_sys_linkat, aarch64_sys_renameat>: New.
2281         <aarch64_sys_faccessat>: New.
2282         <aarch64_sys_open, aarch64_sys_readlink, aarch64_sys_fstatat>: Remove.
2283         <aarch64_sys_openat, aarch64_sys_readlinkat>: New.
2284         <aarch64_sys_newfstatat>: New.
2285         (UNSUPPORTED_SYSCALL_MAP): New macro.
2286         (aarch64_canonicalize_syscall): Add missing syscalls.
2287
2288 2016-02-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
2289
2290         * gdb-gdb.py (class TypeFlagsPrinter): Use parentheses for print.
2291
2292 2016-02-22  Yao Qi  <yao.qi@linaro.org>
2293
2294         * arm-tdep.c: Fix code format issues.
2295
2296 2016-02-21  Iain Buclaw  <ibuclaw@gdcproject.org>
2297
2298         * d-namespace.c (d_lookup_symbol_imports): Remove argument
2299         'search_parents'.  All callers updated.
2300
2301 2016-02-18  Marcin Kościelnicki  <koriakin@0x04.net>
2302
2303         * s390-linux-tdep.c (s390_guess_tracepoint_registers): New function.
2304         (s390_gdbarch_init): Fill guess_tracepoint_registers hook.
2305
2306 2016-02-18  Walfred Tedeschi  <walfred.tedeschi@intel.com>
2307
2308         * NEWS: Add entry for bound violation.
2309         * amd64-linux-tdep.c (amd64_linux_init_abi_common):
2310         Add handler for segmentation fault.
2311         * gdbarch.sh (handle_segmentation_fault): New.
2312         * gdbarch.c: Regenerate.
2313         * gdbarch.h: Regenerate.
2314         * i386-linux-tdep.c (i386_linux_handle_segmentation_fault): New.
2315         (SIG_CODE_BONDARY_FAULT): New define.
2316         (i386_linux_init_abi): Use i386_mpx_bound_violation_handler.
2317         * i386-linux-tdep.h (i386_linux_handle_segmentation_fault) New.
2318         * i386-tdep.c (i386_mpx_enabled): Add as external.
2319         * i386-tdep.c (i386_mpx_enabled): Add as external.
2320         * infrun.c (handle_segmentation_fault): New function.
2321         (print_signal_received_reason): Use handle_segmentation_fault.
2322
2323 2016-02-18  Marcin Kościelnicki  <koriakin@0x04.net>
2324
2325         * arch-utils.c (default_guess_tracepoint_registers): New function.
2326         * arch-utils.h (default_guess_tracepoint_registers): New prototype.
2327         * gdbarch.c: Regenerate.
2328         * gdbarch.h: Regenerate.
2329         * gdbarch.sh: Add guess_tracepoint_registers hook.
2330         * tracefile.c (tracefile_fetch_registers): Use the new gdbarch hook.
2331
2332 2016-02-17  Gary Benson  <gbenson@redhat.com>
2333
2334         * exec.c (exec_file_locate_attach): Add missing cleanup.
2335
2336 2016-02-16  Don Breazeal  <donb@codesourcery.com>
2337
2338         PR remote/19496
2339         * remote.c (remove_new_fork_children): Check for pending
2340         fork status in thread_info.suspend.
2341
2342 2016-02-16  Yao Qi  <yao.qi@linaro.org>
2343
2344         * arm-linux-tdep.c (arm_linux_software_single_step): Assign
2345         'old_chain' later.
2346
2347 2016-02-16  Yao Qi  <yao.qi@linaro.org>
2348
2349         * arch/arm-get-next-pcs.h (struct arm_get_next_pcs_ops)
2350         <syscall_next_pc>: Remove argument PC.  Callers updated.
2351         * arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc):
2352         Remove argument PC.  Get pc from regcache_read_pc.
2353         * arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Remove
2354         argument PC.
2355
2356 2016-02-15  Yao Qi  <yao.qi@linaro.org>
2357
2358         * aarch64-tdep.c (aarch64_analyze_prologue): Remove "0x".
2359
2360 2016-02-12  Yao Qi  <yao.qi@linaro.org>
2361
2362         * arch/arm-linux.c (arm_linux_get_next_pcs_fixup): Calculate
2363         nextpc according to instruction.
2364
2365 2016-02-12  Yao Qi  <yao.qi@linaro.org>
2366
2367         * arch/arm-get-next-pcs.c (arm_get_next_pcs): Call
2368         self->ops->fixup if it isn't NULL.
2369         * arch/arm-get-next-pcs.h: Include gdb_vecs.h.
2370         (struct arm_get_next_pcs_ops) <fixup>: New field.
2371         * arch/arm-linux.c: Include common-regcache.h and
2372         arch/arm-get-next-pcs.h.
2373         (arm_linux_get_next_pcs_fixup): New function.
2374         * arch/arm-linux.h (arm_linux_get_next_pcs_fixup): Declare.
2375         * arm-linux-tdep.c (arm_linux_get_next_pcs_ops): Initialize
2376         it with arm_linux_get_next_pcs_fixup.
2377         (arm_linux_software_single_step): Move code to
2378         arm_linux_get_next_pcs_fixup.
2379         * arm-tdep.c (arm_get_next_pcs_ops): Initialize it.
2380
2381 2016-02-12  Marcin Kościelnicki  <koriakin@0x04.net>
2382
2383         * xml-tdesc.c (target_fetch_description_xml) [!HAVE_LIBEXPAT]: Warn
2384         and return NULL.
2385
2386 2016-02-12  Markus Metzger  <markus.t.metzger@intel.com>
2387
2388         * frame.h (skip_tailcall_frames): Update comment.
2389         * frame.c (skip_artificial_frames, skip_tailcall_frames): Return NULL
2390         if only artificial frames are found.  Update comment.
2391         (frame_unwind_caller_id): Handle NULL return.
2392         (frame_unwind_caller_pc, frame_unwind_caller_arch): Assert that
2393         skip_artificial_frames does not return NULL.
2394         (frame_pop): Add an error if only tailcall frames are found.
2395         * infcmd.c (finish_command): Move skip_tailcall_frames call into
2396         forward-execution case.  Add an error if only tailcall frames are
2397         found.
2398
2399 2016-02-12  Markus Metzger  <markus.t.metzger@intel.com>
2400
2401         * stack.c (frame_info): Check frame_unwind_caller_id.
2402
2403 2016-02-12  Markus Metzger  <markus.t.metzger@intel.com>
2404
2405         * frame.h (skip_tailcall_frames): New.
2406         * frame.c (skip_tailcall_frames): New.
2407         (frame_pop): Call skip_tailcall_frames.
2408         * infcmd.c (finish_command): Call skip_tailcall_frames.
2409
2410 2016-02-11  Pedro Alves  <palves@redhat.com>
2411
2412         * Makefile.in (check-parallel): New rule.
2413
2414 2016-02-11  Simon Marchi  <simon.marchi@ericsson.com>
2415
2416         * arm-tdep.c (arm_skip_prologue): Remove unused variables.
2417         (arm_analyze_prologue): Likewise.
2418         (arm_scan_prologue): Likewise.
2419         (arm_m_exception_prev_register): Likewise.
2420         (arm_copy_block_xfer): Likewise.
2421         (thumb2_copy_block_xfer): Likewise.
2422         (arm_decode_miscellaneous): Likewise.
2423         (arm_decode_ld_st_word_ubyte): Likewise.
2424         (arm_decode_svc_copro): Likewise.
2425         (thumb2_decode_svc_copro): Likewise.
2426         (thumb_copy_16bit_ldr_literal): Likewise.
2427         (thumb_copy_pop_pc_16bit): Likewise.
2428         (decode_thumb_32bit_ld_mem_hints): Likewise.
2429         (arm_show_force_mode): Likewise.
2430         (_initialize_arm_tdep): Likewise.
2431         (arm_record_strx): Likewise.
2432         (arm_record_extension_space): Likewise.
2433         (arm_record_data_proc_misc_ld_str): Likewise.
2434         (arm_record_exreg_ld_st_insn): Likewise.
2435         (arm_record_vfp_data_proc_insn): Likewise.
2436         (arm_record_coproc_data_proc): Likewise.
2437         (thumb_record_misc): Likewise.
2438         (thumb_record_ldm_stm_swi): Likewise.
2439         (thumb2_record_ld_st_dual_ex_tbb): Likewise.
2440         (thumb2_record_ld_mem_hints): Likewise.
2441         (thumb2_record_lmul_lmla_div): Likewise.
2442         (thumb2_record_asimd_struct_ld_st): Likewise.
2443         (arm_process_record): Likewise.
2444
2445 2016-02-11  Simon Marchi  <simon.marchi@ericsson.com>
2446
2447         * arm-tdep.c (arm_displaced_step_copy_insn): Remove.
2448         (ARM displaced stepping support): Remove reference to
2449         arm_displaced_step_copy_insn in comment.
2450         * arm-tdep.h (arm_displaced_step_copy_insn): Remove.
2451         * arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Remove
2452         reference to arm_displaced_step_copy_insn in comment.
2453
2454 2016-02-11  Simon Marchi  <simon.marchi@ericsson.com>
2455
2456         * arm-tdep.c (thumb_copy_unmodified_16bit): Change type of insn.
2457         (thumb_copy_b): Likewise.
2458         (arm_decode_b_bl_ldmstm): Likewise.
2459         (thumb_copy_16bit_ldr_literal): Likewise.
2460         (thumb_copy_pop_pc_16bit): Likewise.
2461
2462 2016-02-11  Antoine Tremblay  <antoine.tremblay@ericsson.com>
2463
2464         * tracepoint.c (encode_actions_1): Use target_gdbarch () rather
2465         than loc->gdbarch.
2466
2467 2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>
2468
2469         * tracefile-tfile.c (trace_tdesc): New static variable.
2470         (tfile_open): Clear trace_tdesc, call target_find_description.
2471         (tfile_interp_line): Recognize tdesc lines.
2472         (tfile_close): Clear trace_tdesc.
2473         (tfile_xfer_partial_features): New function.
2474         (tfile_xfer_partial): Call tfile_xfer_partial_features.
2475         (tfile_append_tdesc_line): New function.
2476
2477 2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>
2478
2479         * ctf.c (ctf_write_tdesc): New function.
2480         (ctf_write_ops): Wire in ctf_write_tdesc.
2481         * tracefile-tfile.c (tfile_write_tdesc): New function.
2482         (tfile_write_ops): Wire in tfile_write_tdesc.
2483         * tracefile.c (trace_save): Call write_tdesc method.
2484         * tracefile.h (struct trace_file_write_ops): Add write_tdesc method.
2485         * xml-tdesc.c (target_fetch_description_xml): New function.
2486         * xml-tdesc.h: Add target_fetch_description_xml prototype.
2487
2488 2016-02-10  Simon Marchi  <simon.marchi@ericsson.com>
2489
2490         * arm-tdep.c (arm_copy_extra_ld_st): Fix "unpriveleged" typo.
2491         (arm_decode_dp_misc): Likewise.
2492
2493 2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>
2494
2495         * amd64-tdep.c (amd64_ax_pseudo_register_collect): New function.
2496         (amd64_init_abi): Fill ax_pseudo_register_collect hook.
2497         * gdb/i386-tdep.c (i386_pseudo_register_read_into_value): Remove
2498         misleading comment.
2499         (i386_pseudo_register_write): Ditto.
2500         (i386_ax_pseudo_register_collect): New function.
2501         (i386_gdbarch_init): Fill ax_pseudo_register_collect hook.
2502         * i386-tdep.h: Add i386_ax_pseudo_register_collect prototype.
2503
2504 2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>
2505
2506         * tracefile-tfile.c (tfile_fetch_registers): Use g packet order
2507         instead of gdb order.
2508
2509 2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>
2510
2511         * tracefile-tfile.c (tfile_fetch_registers): Fix off-by-one in bounds
2512         check.
2513
2514 2016-02-10  Joel Brobecker  <brobecker@adacore.com>
2515
2516         * NEWS: Create a new section for the next release branch.
2517         Rename the section of the current branch, now that it has
2518         been cut.
2519
2520 2016-02-10  Joel Brobecker  <brobecker@adacore.com>
2521
2522         GDB 7.11 branch created (9ef9e6a6a0dd8f948708cb67c9afcfd0be40cb0a):
2523         * version.in: Bump version to 7.11.50.DATE-git.
2524
2525 2016-02-09  Keith Seitz  <keiths@redhat.com>
2526
2527         PR breakpoints/19546
2528         * breakpoint.c (breakpoint_event_location_empty_p): New function.
2529         (update_breakpoints_after_exec, bkpt_re_set): Use this new function
2530         instead of event_location_empty_p.
2531
2532 2016-02-09  Keith Seitz  <keiths@redhat.com>
2533
2534         * mi/mi-cmd-break.c (mi_cmd_break_insert_1): Use
2535         string_to_event_location_basic instead of string_to_event_location.
2536
2537 2016-02-09  Keith Seitz  <keiths@redhat.com>
2538
2539         * guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Skip
2540         leading whitespace and use string_to_event_location_basic instead
2541         of new_linespec_location.
2542
2543 2016-02-09  Keith Seitz  <keiths@redhat.com>
2544
2545         PR python/19506
2546         * python/py-breakpoint.c (bppy_init): Use
2547         string_to_event_location_basic instead of new_linespec_location.
2548
2549 2016-02-09  Keith Seitz  <keiths@redhat.com>
2550
2551         * location.c (string_to_explicit_location): Note that "-p" is
2552         reserved for probe locations and return NULL for any input
2553         that starts with that.
2554         (string_to_event_location): Move "legacy" linespec code to ...
2555         (string_to_event_location_basic): ... here.
2556         * location.h (string_to_event_location): Update comment.
2557         (string_to_event_location_basic): New function.
2558
2559 2016-02-09  Simon Marchi  <simon.marchi@ericsson.com>
2560
2561         * configure.ac: Use AC_CONFIG_FILES instead of passing arguments
2562         to AC_OUTPUT.  Remove "exit 0" at the end.
2563         * configure: Regenerate.
2564
2565 2016-02-09  Pedro Alves  <palves@redhat.com>
2566
2567         PR breakpoints/19548
2568         * breakpoint.c (create_overlay_event_breakpoint): Don't update
2569         global location list here.
2570         (create_longjmp_master_breakpoint)
2571         (create_std_terminate_master_breakpoint)
2572         (create_exception_master_breakpoint, create_jit_event_breakpoint)
2573         (update_breakpoint_locations):
2574         (breakpoint_re_set): Update global location list after all
2575         breakpoints are re-set.
2576
2577 2016-02-08  Simon Marchi  <simon.marchi@ericsson.com>
2578
2579         * remote.c (remote_register_number_and_offset): Remove unused
2580         variable(s).
2581         (remote_thread_always_alive): Likewise.
2582         (remote_update_thread_list): Likewise.
2583         (process_initial_stop_replies): Likewise.
2584         (remote_start_remote): Likewise.
2585         (remote_check_symbols): Likewise.
2586         (discard_pending_stop_replies): Likewise.
2587         (process_stop_reply): Likewise.
2588         (putpkt_binary): Likewise.
2589         (getpkt): Likewise.
2590         (remote_add_target_side_condition): Likewise.
2591         (remote_insert_breakpoint): Likewise.
2592         (remote_supports_stopped_by_sw_breakpoint): Likewise.
2593         (remote_supports_stopped_by_hw_breakpoint): Likewise.
2594         (remote_xfer_partial): Likewise.
2595         (remote_read_btrace): Likewise.
2596         (remote_async_serial_handler): Likewise.
2597         (remote_thread_events): Likewise.
2598         (_initialize_remote): Likewise.
2599
2600 2016-02-07  Simon Marchi  <simon.marchi@polymtl.ca>
2601
2602         * varobj.h (varobj_delete): Remove dellist parameter, update and
2603         move documentation here.
2604         * varobj.c (struct cpstack, cppush, cppop): Remove.
2605         (delete_variable): Remove resultp (first) parameter.
2606         (delete_variable_1): Likewise.
2607         (varobj_delete): Remove dellist parameter and unused code.
2608         (update_dynamic_varobj_children): Adjust varobj_delete call.
2609         (update_type_if_necessary): Likewise.
2610         (varobj_set_visualizer): Likewise.
2611         (varobj_update): Likewise.
2612         (value_of_root): Likewise.
2613         (varobj_invalidate_iter): Likewise.
2614         * mi/mi-cmd-var.c (mi_cmd_var_delete): Likewise.
2615
2616 2016-02-04  Yao Qi  <yao.qi@linaro.org>
2617
2618         * remote.c (remote_wait_as): Set rs->waiting_for_stop_reply to
2619         0 before handling 'F' and set it back afterwards.
2620
2621 2016-02-02  Simon Marchi  <simon.marchi@ericsson.com>
2622
2623         * ui-out.c (MAX_UI_OUT_LEVELS): Remove.
2624
2625 2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>
2626
2627         * amd64-linux-siginfo.c (nat_siginfo_t, nat_sigval_t, nat_timeval):
2628         New types.
2629         (compat_siginfo): New bound fields added.
2630         (compat_x32_siginfo): New field added.
2631         (cpt_si_addr_lsb): New define.
2632         (compat_siginfo_from_siginfo): Use nat_siginfo.
2633         (siginfo_from_compat_siginfo): Use nat_siginfo.
2634         (compat_x32_siginfo_from_siginfo): Likewise.
2635         (siginfo_from_compat_x32_siginfo): Likewise.
2636
2637 2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>
2638
2639         * linux-tdep.c (linux_get_siginfo_type): Add the _addr_bnd
2640         structure to the siginfo if extra_fields contains
2641         LINUX_SIGINFO_FIELD_ADDR_BND.
2642
2643 2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>
2644
2645         * linux-tdep.h (linux_get_siginfo_type_with_fields): Make extern.
2646         * linux-tdep.c (linux_get_siginfo_type_with_fields): Make extern.
2647         * i386-linux-tdep.h (x86_linux_get_siginfo_type): New
2648         function.
2649         * amd64-linux-tdep.c (amd64_linux_init_abi_common): Add
2650         x86_linux_get_siginfo_type for the amd64 abi.
2651         * i386-linux-tdep.c (x86_linux_get_siginfo_type): New
2652         function.
2653         (i386_linux_init_abi): Add new function at the i386 ABI
2654         initialization.
2655
2656 2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>
2657
2658         * linux-tdep.h (linux_siginfo_extra_field_values): New enum values.
2659         (linux_siginfo_extra_fields): New enum type.
2660         * linux-tdep.c (linux_get_siginfo_type_with_fields): New function.
2661         (linux_get_siginfo_type): Use new function.
2662
2663 2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>
2664
2665         * nat/amd64-linux-siginfo.c: New file.
2666         * nat/amd64-linux-siginfo.h: New file.
2667         * Makefile.in (HFILES_NO_SRCDIR): Add nat/amd64-linux-siginfo.h.
2668         (amd64-linux-siginfo.o): New rule.
2669         * config/i386/linux64.mh (NATDEPFILES): Add amd64-linux-siginfo.o.
2670         * amd64-linux-nat.c (nat/amd64-linux-siginfo.h): New include.
2671         (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
2672         (compat_x32_siginfo_from_siginfo, siginfo_from_compat_x32_siginfo)
2673         (compat_timeval, compat_sigval, compat_x32_clock, cpt_si_pid)
2674         (cpt_si_uid, cpt_si_timerid, cpt_si_overrun, cpt_si_status)
2675         (cpt_si_utime, cpt_si_stime, cpt_si_ptr, cpt_si_addr, cpt_si_band)
2676         (cpt_si_fd, si_timerid, si_overrun): Move to nat/amd64-linux-siginfo.c.
2677
2678 2016-02-01  Andrew Burgess  <andrew.burgess@embecosm.com>
2679
2680         * value.c (max_value_size): New variable.
2681         (MIN_VALUE_FOR_MAX_VALUE_SIZE): New define.
2682         (set_max_value_size): New function.
2683         (show_max_value_size): New function.
2684         (check_type_length_before_alloc): New function.
2685         (allocate_value_contents): Call check_type_length_before_alloc.
2686         (set_value_enclosing_type): Likewise.
2687         (_initialize_values): Add set/show handler for max-value-size.
2688         * NEWS: Mention new set/show command.
2689
2690 2016-01-31  Simon Marchi  <simon.marchi@polymtl.ca>
2691
2692         * varobj.h (struct varobj): Fix typos in comments.
2693         (struct lang_varobj_ops): Likewise.
2694         * varobj.c (VAROBJ_TABLE_SIZE): Likewise.
2695         (varobj_create): Move misplaced comment.
2696
2697 2016-01-29  Simon Marchi  <simon.marchi@ericsson.com>
2698
2699         * aarch64-tdep.c (aarch64_record_asimd_load_store): Add braces
2700         to for include additional lines.
2701         * xcoffread.c (scan_xcoff_symtab): Remove unnecessary braces.
2702
2703 2016-01-28  Simon Marchi  <simon.marchi@ericsson.com>
2704
2705         * gnulib/import/Makefile.am: Regenerate.
2706         * gnulib/import/Makefile.in: Regenerate.
2707         * gnulib/import/m4/gnulib-cache.m4: Regenerate.
2708         * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add rawmemchr.
2709
2710 2016-01-28  Simon Marchi  <simon.marchi@ericsson.com>
2711
2712         * remote.c (skip_to_semicolon): Remove.
2713         (remote_parse_stop_reply): Use strchrnul instead of
2714         skip_to_semicolon.
2715         * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add
2716         strchrnul.
2717         * gnulib/aclocal.m4: Regenerate.
2718         * gnulib/config.in: Regenerate.
2719         * gnulib/configure: Regenerate.
2720         * gnulib/import/Makefile.am: Regenerate.
2721         * gnulib/import/Makefile.in: Regenerate.
2722         * gnulib/import/m4/gnulib-cache.m4: Regenerate.
2723         * gnulib/import/m4/gnulib-comp.m4: Regenerate.
2724         * gnulib/import/m4/rawmemchr.m4: New file.
2725         * gnulib/import/m4/strchrnul.m4: New file.
2726         * gnulib/import/rawmemchr.c: New file.
2727         * gnulib/import/rawmemchr.valgrind: New file.
2728         * gnulib/import/strchrnul.c: New file.
2729         * gnulib/import/strchrnul.valgrind: New file.
2730
2731 2016-01-28  Yao Qi  <yao.qi@linaro.org>
2732
2733         * breakpoint.c (build_target_command_list): Don't call continue
2734         if aexpr is NULL.
2735         (build_target_condition_list): Likewise.
2736
2737 2016-01-27  Kevin Buettner  <kevinb@redhat.com>
2738
2739         * rx-tdep.c (rx_push_dummy_call): Treat scalars larger than 8
2740         bytes as aggregates.
2741
2742 2016-01-27  Joel Brobecker  <brobecker@adacore.com>
2743
2744         * MAINTAINERS (Responsible Maintainers): Add Keith Seitz as
2745         Linespec Maintainers.
2746
2747 2016-01-26  Simon Marchi  <simon.marchi@ericsson.com>
2748
2749         * common/common-utils.c (skip_spaces): Fix comment.
2750         (skip_to_space_const): Likewise.
2751
2752 2016-01-25  Yao Qi  <yao.qi@linaro.org>
2753
2754         * arch/arm-get-next-pcs.c (thumb_deal_with_atomic_sequence_raw):
2755         Remove argument pc.  Get pc by regcache_read_pc.  Callers updated.
2756         (arm_deal_with_atomic_sequence_raw): Likewise.
2757         (thumb_get_next_pcs_raw): Likewise.
2758         (arm_get_next_pcs_raw): Likewise.
2759         (arm_get_next_pcs): Remove argument pc.  Callers updated.
2760         * arch/arm-get-next-pcs.h (arm_get_next_pcs): Update declaration.
2761
2762 2016-01-25  Mark Wielaard  <mjw@redhat.com>
2763
2764         * ada-lang.c (ada_evaluate_subexp): Add proper else block.
2765         * c-typeprint.c (c_type_print_base): Fix misleading indentation of
2766         if statement.
2767         * inflow.c (child_terminal_ours_1): Fix misleading indentation of
2768         statement block by introducing an else.
2769         * linux-record.c (record_linux_sockaddr): Fix misleading indentation
2770         of return statements.
2771         (record_linux_msghdr): Likewise.
2772
2773 2016-01-25  Pedro Alves  <palves@redhat.com>
2774
2775         PR threads/19461
2776         * infrun.c (handle_inferior_event_1) <fork/vfork>: Update
2777         parent/child running states.
2778
2779 2016-01-25  Pedro Alves  <palves@redhat.com>
2780
2781         PR gdb/19494
2782         * linux-nat.c (kill_one_lwp): New, factored out from ...
2783         (kill_callback): ... this.
2784         (kill_wait_callback): New, factored out from ...
2785         (kill_wait_one_lwp): ... this.
2786         (kill_unfollowed_fork_children): New function.
2787         (linux_nat_kill): Use it.
2788
2789 2016-01-22  John Baldwin  <jhb@FreeBSD.org>
2790
2791         * fbsd-nat.c (fbsd_pid_to_str): Adjust string format.
2792
2793 2016-01-22  Yao Qi  <yao.qi@linaro.org>
2794
2795         * arm-linux-nat.c (fetch_fpregs): Call perror_with_name
2796         instead of warning.
2797         (store_fpregs, fetch_regs, store_regs): Likewise.
2798         (fetch_wmmx_regs, store_wmmx_regs): Likewise.
2799         (fetch_vfp_regs, store_vfp_regs): Likewise.
2800
2801 2016-01-21  Doug Evans  <dje@google.com>
2802
2803         * breakpoint.c (init_breakpoint_sal): Add comment.
2804
2805 2016-01-21  Marcin Kościelnicki  <koriakin@0x04.net>
2806
2807         * ax-gdb.c (gen_traced_pop): Use gen_fetch for string collection.
2808
2809 2016-01-21  Andrew Burgess  <andrew.burgess@embecosm.com>
2810
2811         * disasm.c (maybe_add_dis_line_entry): Rename to...
2812         (add_dis_line_entry): ...this, and update header comment.
2813         (do_mixed_source_and_assembly): Now use add_dis_line_entry.
2814
2815 2016-01-21  Pedro Alves  <palves@redhat.com>
2816
2817         * Makefile.in (COMPILER_CFLAGS): New.
2818         (CXXFLAGS): Get it from configure.
2819         (INTERNAL_CFLAGS_BASE, INTERNAL_LDFLAGS): Use COMPILER_CFLAGS
2820         instead of CFLAGS.
2821         * build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Set and AC_SUBST
2822         COMPILER_CFLAGS.
2823         * configure: Regenerate.
2824
2825 2016-01-21  Joel Brobecker  <brobecker@adacore.com>
2826
2827         * location.h (new_address_location): Add new parameters
2828         "addr_string" and "addr_string_len".
2829         (get_address_string_location): Add declaration.
2830         * location.c (new_address_location): Add new parameters
2831         "addr_string" and "addr_string_len".  If not NULL, store
2832         a copy of the addr_string in the new location as well.
2833         (get_address_string_location): New function.
2834         (string_to_event_location): Update call to new_address_location.
2835         * linespec.c (event_location_to_sals) <ADDRESS_LOCATION>:
2836         Save the event location in the parser's state before
2837         passing it to convert_address_location_to_sals.
2838         * breakpoint.c (create_thread_event_breakpoint): Update call
2839         to new_address_location.
2840         (init_breakpoint_sal): Get the event location's string, if any,
2841         and use it to update call to new_address_location.
2842         * python/py-finishbreakpoint.c (bpfinishpy_init):
2843         Update call to new_address_location.
2844         * spu-tdep.c (spu_catch_start): Likewise.
2845
2846         * config/djgpp/fnchange.lst: Add entries for
2847         gdb/testsuite/gdb.base/break-fun-addr1.c and
2848         gdb/testsuite/gdb.base/break-fun-addr2.c.
2849
2850 2016-01-21  Yao Qi  <yao.qi@linaro.org>
2851
2852         * arm-linux-tdep.c (arm_linux_sigreturn_next_pc): Add parameter
2853         is_thumb and set it according to CPSR saved on the stack.
2854         (arm_linux_get_next_pcs_syscall_next_pc): Pass is_thumb to
2855         arm_linux_sigreturn_next_pc.
2856
2857 2016-01-20  Simon Marchi  <simon.marchi@polymtl.ca>
2858
2859         * python/lib/gdb/printing.py (FlagEnumerationPrinter.__call__):
2860         Fix enumerators sort key function.
2861
2862 2016-01-20  Joel Brobecker  <brobecker@adacore.com>
2863
2864         * printcmd.c (print_scalar_formatted): Move binary operator from
2865         end of line to beginning of next line.  Adjust formatting
2866         accordingly.
2867
2868 2016-01-19  John Baldwin  <jhb@FreeBSD.org>
2869
2870         * fbsd-nat.c (fbsd_pid_to_exec_file): Use new "buflen" instead of
2871         "len" with sysctl.
2872
2873 2016-01-19  John Baldwin  <jhb@FreeBSD.org>
2874
2875         * fbsd-tdep.c (find_stop_signal): Remove.
2876         (struct fbsd_collect_regset_section_cb) <lwp>: New field.
2877         <stop_signal>: New field.
2878         <abort_iteration>: New field.
2879         (fbsd_collect_regset_section_cb): Use new fields.
2880         (fbsd_collect_thread_registers): New function.
2881         (struct fbsd_corefile_thread_data): New structure.
2882         (fbsd_corefile_thread): New function.
2883         (fbsd_make_corefile_notes): Use new function to dump notes for each
2884         non-exited thread in a process.
2885
2886 2016-01-19  John Baldwin  <jhb@FreeBSD.org>
2887
2888         * configure.ac: Check for support for LWP names on FreeBSD.
2889         * fbsd-nat.c [PT_LWPINFO] New variable debug_fbsd_lwp.
2890         [TDP_RFPPWAIT || HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]
2891         (fbsd_fetch_kinfo_proc): Move function earlier.
2892         [PT_LWPINFO] (fbsd_thread_alive): New function.
2893         [PT_LWPINFO] (fbsd_pid_to_str): New function.
2894         [HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME] (fbsd_thread_name): New function.
2895         [PT_LWP_EVENTS] (fbsd_enable_lwp_events): New function.
2896         [PT_LWPINFO] (fbsd_add_threads): New function.
2897         [PT_LWPINFO] (fbsd_update_thread_list): New function.
2898         [PT_LWPINFO] New variable super_resume.
2899         [PT_LWPINFO] (resume_one_thread_cb): New function.
2900         [PT_LWPINFO] (resume_all_threads_cb): New function.
2901         [PT_LWPINFO] (fbsd_resume): New function.
2902         (fbsd_remember_child): Save full ptid instead of plain pid.
2903         (fbsd_is_child_pending): Return ptid of saved child process.
2904         (fbsd_wait): Include lwp in returned ptid and switch to LWP ptid on
2905         first stop.
2906         [PT_LWP_EVENTS] Handle LWP events.
2907         [TDP_RFPPWAIT] Include LWP in child ptid.
2908         (fbsd_post_startup_inferior) [PT_LWP_EVENTS]: Enable LWP events.
2909         (fbsd_post_attach) [PT_LWP_EVENTS]: Enable LWP events.
2910         Add threads for existing processes.
2911         (fbsd_nat_add_target) [PT_LWPINFO]: Set "to_thread_alive" to
2912         "fbsd_thread_alive".
2913         Set "to_pid_to_str" to "fbsd_pid_to_str".
2914         [HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]: Set "to_thread_name" to
2915         "fbsd_thread_name".
2916         [PT_LWPINFO]: Set "to_update_thread_list" to "fbsd_update_thread_list".
2917         Set "to_has_thread_control" to "tc_schedlock".
2918         Set "to_resume" to "fbsd_resume".
2919         (_initialize_fbsd_nat): New function.
2920         * configure: Regenerate.
2921         * config.in: Regenerate.
2922
2923 2016-01-19  John Baldwin  <jhb@FreeBSD.org>
2924
2925         * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers): Use
2926         get_ptrace_pid.
2927         (amd64bsd_store_inferior_registers): Use get_ptrace_pid.
2928         (amd64bsd_dr_get): Use get_ptrace_pid.
2929         (amd64bsd_dr_set): Use get_ptrace_pid.
2930         * i386bsd-nat.c (i386bsd_fetch_inferior_registers): Use get_ptrace_pid.
2931         (i386bsd_store_inferior_registers): Use get_ptrace_pid.
2932         (i386bsd_dr_get): Use get_ptrace_pid.
2933         (i386bsd_dr_set): Use get_ptrace_pid.
2934         * inf-ptrace.c (get_ptrace_pid): Export.
2935         * inf-ptrace.h (get_ptrace_pid): Declare.
2936         * ppcfbsd-nat.c (ppcfbsd_fetch_inferior_registers): Use lwp id.
2937         (ppcfbsd_store_inferior_registers): Use lwp id.
2938
2939 2016-01-19  John Baldwin  <jhb@FreeBSD.org>
2940
2941         * fbsd_tdep.c (fbsd_core_pid_to_str): New function.
2942         (fbsd_core_thread_name): New function.
2943         (fbsd_init_abi): Add "core_pid_to_str" gdbarch method.
2944         Add "core_thread_name" gdbarch method.
2945
2946 2016-01-19  John Baldwin  <jhb@FreeBSD.org>
2947
2948         * corelow.c (core_thread_name): New function.
2949         (init_core_ops): Use "core_thread_name" for the "to_thread_name"
2950         target op.
2951         * gdbarch.sh (core_thread_name): New gdbarch callback.
2952         * gdbarch.h: Re-generate.
2953         * gdbarch.c: Re-generate.
2954
2955 2016-01-19  Simon Marchi  <simon.marchi@polymtl.ca>
2956
2957         * python/lib/gdb/printing.py (_EnumInstance.to_string): Explicitly
2958         convert gdb.Value to integer type using int().
2959
2960 2016-01-19  John Baldwin  <jhb@FreeBSD.org>
2961
2962         * configure.ac: Include <sys/types.h when checking for "r_fs" in
2963         "struct reg".
2964         * configure: Regenerate.
2965
2966 2016-01-19  Pedro Alves  <palves@redhat.com>
2967
2968         * ax-gdb.c (agent_command_1): Adjust call to decode_line_full.
2969         * break-catch-throw.c (re_set_exception_catchpoint): Pass the
2970         current program space down to linespec decoding and breakpoint
2971         location updating.
2972         * breakpoint.c (parse_breakpoint_sals): Adjust calls to
2973         decode_line_full.
2974         (until_break_command): Adjust calls to decode_line_1.
2975         (base_breakpoint_decode_location, bkpt_decode_location): Add
2976         'search_pspace' parameter.  Pass it along.
2977         (bkpt_probe_create_sals_from_location): Adjust calls to
2978         parse_probes.
2979         (tracepoint_decode_location, tracepoint_probe_decode_location)
2980         (strace_marker_decode_location): Add 'search_pspace' parameter.
2981         Pass it along.
2982         (all_locations_are_pending): Rewrite to take a breakpoint and
2983         program space as arguments instead.
2984         (hoist_existing_locations): New function.
2985         (update_breakpoint_locations): Add 'filter_pspace' parameter.  Use
2986         hoist_existing_locations instead of always removing all locations,
2987         and adjust to all_locations_are_pending change.
2988         (location_to_sals): Add 'search_pspace' parameter.  Pass it along.
2989         Don't disable the breakpoint if there are other locations in
2990         another program space.
2991         (breakpoint_re_set_default): Adjust to pass down the current
2992         program space as filter program space.
2993         (decode_location_default): Add 'search_pspace' parameter and pass
2994         it along.
2995         (prepare_re_set_context): Don't switch program space here.
2996         (breakpoint_re_set): Use save_current_space_and_thread instead of
2997         save_current_program_space.
2998         * breakpoint.h (struct breakpoint_ops) <decode_location>: Add
2999         'search_pspace' parameter.
3000         (update_breakpoint_locations): Add 'filter_pspace' parameter.
3001         * cli/cli-cmds.c (edit_command, list_command): Adjust calls to
3002         decode_line_1.
3003         * elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the current
3004         program space as filter program space.
3005         * linespec.c (struct linespec_state) <search_pspace>: New field.
3006         (create_sals_line_offset, convert_explicit_location_to_sals)
3007         (parse_linespec): Pass the search program space down.
3008         (linespec_state_constructor): Add 'search_pspace' parameter.
3009         Store it.
3010         (linespec_parser_new): Add 'search_pspace' parameter and pass it
3011         along.
3012         (linespec_lex_to_end): Adjust.
3013         (decode_line_full, decode_line_1): Add 'search_pspace' parameter
3014         and pass it along.
3015         (decode_line_with_last_displayed): Adjust.
3016         (collect_symtabs_from_filename, symtabs_from_filename): New
3017         'search_pspace' parameter.  Use it.
3018         (find_function_symbols): Pass the search program space down.
3019         * linespec.h (decode_line_1, decode_line_full): Add
3020         'search_pspace' parameter.
3021         * probe.c (parse_probes_in_pspace): New function, factored out
3022         from ...
3023         (parse_probes): ... this.  Add 'search_pspace' parameter and use
3024         it.
3025         * probe.h (parse_probes): Add pspace' parameter.
3026         * python/python.c (gdbpy_decode_line): Adjust.
3027         * tracepoint.c (scope_info): Adjust.
3028
3029 2016-01-18  Maciej W. Rozycki  <macro@imgtec.com>
3030
3031         * mips-tdep.c (mips_insn_size): Remove 48-bit microMIPS
3032         instruction support.
3033         (micromips_next_pc): Likewise.
3034         (micromips_scan_prologue): Likewise.
3035         (micromips_deal_with_atomic_sequence): Likewise.
3036         (micromips_stack_frame_destroyed_p): Likewise.
3037         (mips_breakpoint_from_pc): Likewise.
3038
3039 2016-01-18  Maciej W. Rozycki  <macro@imgtec.com>
3040
3041         * mips-tdep.c (micromips_insn_at_pc_has_delay_slot): Pass
3042         unshifted 16-bit microMIPS instruction word to `mips_insn_size'.
3043
3044 2016-01-18  Pedro Alves  <palves@redhat.com>
3045
3046         * NEWS: Mention that GDB now displays the ID and name of the
3047         thread that hit a breakpoint or received a signal.
3048         * break-catch-sig.c (signal_catchpoint_print_it): Use
3049         maybe_print_thread_hit_breakpoint.
3050         * break-catch-syscall.c (print_it_catch_syscall): Likewise.
3051         * break-catch-throw.c (print_it_exception_catchpoint): Likewise.
3052         * breakpoint.c (maybe_print_thread_hit_breakpoint): New function.
3053         (print_it_catch_fork, print_it_catch_vfork, print_it_catch_solib)
3054         (print_it_catch_exec, print_it_ranged_breakpoint)
3055         (print_it_watchpoint, print_it_masked_watchpoint, bkpt_print_it):
3056         Use maybe_print_thread_hit_breakpoint.
3057         * breakpoint.h (maybe_print_thread_hit_breakpoint): Declare.
3058         * gdbthread.h (show_thread_that_caused_stop): Declare.
3059         * infrun.c (print_signal_received_reason): Print which thread
3060         received signal.
3061         * thread.c (show_thread_that_caused_stop): New function.
3062
3063 2016-01-18  Gary Benson  <gbenson@redhat.com>
3064
3065         * nat/linux-namespaces.c (do_fork): New function.
3066         (linux_mntns_get_helper): Use the above.
3067
3068 2016-01-17  Jonas Hahnfeld <Hahnfeld@itc.rwth-aachen.de>  (tiny change)
3069
3070         Pushed by Joel Brobecker  <brobecker@adacore.com>.
3071         PR gdb/19208
3072         * dwarf2read.c (read_partial_die): Do not call set_objfile_main_name
3073         if the function has no name.
3074
3075 2016-01-15  Sandra Loosemore  <sandra@codesourcery.com>
3076
3077         * charset.c [PHONY_ICONV] (GDB_DEFAULT_HOST_CHARSET):
3078         Conditionalize for Windows host.
3079         (GDB_DEFAULT_TARGET_CHARSET): Match GDB_DEFAULT_HOST_CHARSET.
3080         (GDB_DEFAULT_TARGET_WIDE_CHARSET): Use UTF-32.
3081         (phony_iconv_open): Handle both UTF-32 endiannesses.
3082         (phony_iconv): Likewise.  Check for output overflow and clean up
3083         out-of-input cases.  Correct adjustment to input buffer pointer.
3084         (set_be_le_names) [PHONY_ICONV]: Use hard-wired names to match
3085         phony_iconv_open.
3086
3087 2016-01-15  Pedro Alves  <palves@redhat.com>
3088
3089         * NEWS: Mention star wildcard ranges.
3090         * cli/cli-utils.c (get_number_or_range): Check state->in_range first.
3091         (number_range_setup_range): New function.
3092         * cli/cli-utils.h (number_range_setup_range): New declaration.
3093         * thread.c (thread_apply_command): Support star TID ranges.
3094         * tid-parse.c (tid_range_parser_finished)
3095         (tid_range_parser_string, tid_range_parser_skip)
3096         (get_tid_or_range, get_tid_or_range): Handle
3097         TID_RANGE_STATE_STAR_RANGE.
3098         (tid_range_parser_star_range): New function.
3099         * tid-parse.h (enum tid_range_state) <TID_RANGE_STATE_STAR_RANGE>:
3100         New value.
3101         (tid_range_parser_star_range): New declaration.
3102
3103 2016-01-15  Pedro Alves  <palves@redhat.com>
3104
3105         * thread.c (thread_apply_command): Use the tid range parser to
3106         advance past the thread ID list.
3107         * tid-parse.c (get_positive_number_trailer): New function.
3108         (parse_thread_id): Use it.
3109         (get_tid_or_range): Use it.  Return 0 instead of throwing invalid
3110         thread ID error.
3111         (get_tid_or_range): Detect negative values.  Return 0 instead of
3112         throwing invalid thread ID error.
3113
3114 2016-01-14  Yao Qi  <yao.qi@linaro.org>
3115
3116         * arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc):
3117         Declare.
3118         (arm_linux_get_next_pcs_ops): Install
3119         arm_linux_get_next_pcs_syscall_next_pc.
3120         (arm_linux_syscall_next_pc): Change to ...
3121         (arm_linux_get_next_pcs_syscall_next_pc): ... it.
3122         (arm_linux_init_abi): Don't set tdep->syscall_next_pc.
3123         * arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Declare.
3124         (arm_get_next_pcs_syscall_next_pc): Make it static.  Don't
3125         call tdep->syscall_next_pc.
3126         * arm-tdep.h (struct gdbarch_tdep) <syscall_next_pc>: Remove.
3127         (arm_get_next_pcs_syscall_next_pc): Remove.
3128
3129 2016-01-14  Yao Qi  <yao.qi@linaro.org>
3130
3131         * remote.c (remote_set_syscall_catchpoint): Cast to char *.
3132         * thread.c (do_captured_thread_select): Cast to const char *.
3133
3134 2016-01-14  Yao Qi  <yao.qi@linaro.org>
3135
3136         * arch/arm-get-next-pcs.c (arm_get_next_pcs_ctor): Change
3137         argument arm_thumb2_breakpoint to has_thumb2_breakpoint.
3138         (thumb_get_next_pcs_raw): Check has_thumb2_breakpoint
3139         instead.
3140         * arch/arm-get-next-pcs.h (struct arm_get_next_pcs)
3141         <arm_thumb2_breakpoint>: Remove.
3142         <has_thumb2_breakpoint>: New field.
3143         (arm_get_next_pcs_ctor): Update declaration.
3144         * arm-linux-tdep.c (arm_linux_software_single_step): Pass
3145         1 to arm_get_next_pcs_ctor.
3146         * arm-tdep.c (arm_software_single_step): Pass 0 to
3147         arm_get_next_pcs_ctor.
3148
3149 2016-01-13  Ulrich Weigand  <uweigand@de.ibm.com>
3150
3151         * MAINTAINERS: Add Andreas Arnez as s390 target maintainer.
3152
3153 2016-01-13  Yao Qi  <yao.qi@linaro.org>
3154
3155         * arch/arm-get-next-pcs.c (arm_get_next_pcs_raw): Use
3156         byte_order_for_code to read instruction.
3157
3158 2016-01-13  Pedro Alves  <palves@redhat.com>
3159
3160         * NEWS: Mention $_gthread.
3161         * gdbthread.h (struct thread_info) <global_num>: Mention
3162         $_gthread.
3163         * thread.c (thread_num_make_value_helper): New function.
3164         (thread_id_make_value): Delete.
3165         (thread_id_per_inf_num_make_value, global_thread_id_make_value):
3166         New.
3167         (thread_funcs): Adjust.
3168         (gthread_funcs): New.
3169         (_initialize_thread): Register $_gthread variable.
3170
3171 2016-01-13  Pedro Alves  <palves@redhat.com>
3172
3173         * NEWS: Mention "info threads -gid".
3174         * gdbthread.h (struct thread_info) <global_num>: Mention "info
3175         threads -gid".
3176         * thread.c (info_threads_command): Handle "-gid".
3177         (_initialize_thread): Adjust "info threads" help string to mention
3178         -gid.
3179
3180 2016-01-13  Pedro Alves  <palves@redhat.com>
3181
3182         * NEWS: Mention InferiorThread.global_num.
3183         * python/py-infthread.c (thpy_get_global_num): New function.
3184         (thread_object_getset): Register "global_num".
3185
3186 2016-01-13  Pedro Alves  <palves@redhat.com>
3187
3188         * NEWS: Mention that thread IDs are now per inferior and global
3189         thread IDs.
3190         * Makefile.in (SFILES): Add tid-parse.c.
3191         (COMMON_OBS): Add tid-parse.o.
3192         (HFILES_NO_SRCDIR): Add tid-parse.h.
3193         * ada-tasks.c: Adjust to use ptid_to_global_thread_id.
3194         * breakpoint.c (insert_breakpoint_locations)
3195         (remove_threaded_breakpoints, bpstat_check_breakpoint_conditions)
3196         (print_one_breakpoint_location, set_longjmp_breakpoint)
3197         (check_longjmp_breakpoint_for_call_dummy)
3198         (set_momentary_breakpoint): Adjust to use global IDs.
3199         (find_condition_and_thread, watch_command_1): Use parse_thread_id.
3200         (until_break_command, longjmp_bkpt_dtor)
3201         (breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust
3202         to use global IDs.
3203         * dummy-frame.c (pop_dummy_frame_bpt): Adjust to use
3204         ptid_to_global_thread_id.
3205         * elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
3206         * gdbthread.h (struct thread_info): Rename field 'num' to
3207         'global_num.  Add new fields 'per_inf_num' and 'inf'.
3208         (thread_id_to_pid): Rename thread_id_to_pid to
3209         global_thread_id_to_ptid.
3210         (pid_to_thread_id): Rename to ...
3211         (ptid_to_global_thread_id): ... this.
3212         (valid_thread_id): Rename to ...
3213         (valid_global_thread_id): ... this.
3214         (find_thread_id): Rename to ...
3215         (find_thread_global_id): ... this.
3216         (ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare.
3217         (print_thread_info): Add comment.
3218         * tid-parse.h: New file.
3219         * tid-parse.c: New file.
3220         * infcmd.c (step_command_fsm_prepare)
3221         (step_command_fsm_should_stop): Adjust to use the global thread
3222         ID.
3223         (until_next_command, until_next_command)
3224         (finish_command_fsm_should_stop): Adjust to use the global thread
3225         ID.
3226         (attach_post_wait): Adjust to check the inferior number too.
3227         * inferior.h (struct inferior) <highest_thread_num>: New field.
3228         * infrun.c (handle_signal_stop)
3229         (insert_exception_resume_breakpoint)
3230         (insert_exception_resume_from_probe): Adjust to use the global
3231         thread ID.
3232         * record-btrace.c (record_btrace_open): Use global thread IDs.
3233         * remote.c (process_initial_stop_replies): Also consider the
3234         inferior number.
3235         * target.c (target_pre_inferior): Clear the inferior's highest
3236         thread num.
3237         * thread.c (clear_thread_inferior_resources): Adjust to use the
3238         global thread ID.
3239         (new_thread): New inferior parameter.  Adjust to use it.  Set both
3240         the thread's global ID and the thread's per-inferior ID.
3241         (add_thread_silent): Adjust.
3242         (find_thread_global_id): New.
3243         (find_thread_id): Make static.  Adjust to rename.
3244         (valid_thread_id): Rename to ...
3245         (valid_global_thread_id): ... this.
3246         (pid_to_thread_id): Rename to ...
3247         (ptid_to_global_thread_id): ... this.
3248         (thread_id_to_pid): Rename to ...
3249         (global_thread_id_to_ptid): ... this.  Adjust.
3250         (first_thread_of_process): Adjust.
3251         (do_captured_list_thread_ids): Adjust to use global thread IDs.
3252         (should_print_thread): New function.
3253         (print_thread_info): Rename to ...
3254         (print_thread_info_1): ... this, and add new show_global_ids
3255         parameter.  Handle it.  Iterate over inferiors.
3256         (print_thread_info): Reimplement as wrapper around
3257         print_thread_info_1.
3258         (show_inferior_qualified_tids): New function.
3259         (print_thread_id): Use it.
3260         (tp_array_compar): Compare inferior numbers too.
3261         (thread_apply_command): Use tid_range_parser.
3262         (do_captured_thread_select): Use parse_thread_id.
3263         (thread_id_make_value): Adjust.
3264         (_initialize_thread): Adjust "info threads" help string.
3265         * varobj.c (struct varobj_root): Update comment.
3266         (varobj_create): Adjust to use global thread IDs.
3267         (value_of_root_1): Adjust to use global_thread_id_to_ptid.
3268         * windows-tdep.c (display_tib): No longer accept an argument.
3269         * cli/cli-utils.c (get_number_trailer): Make extern.
3270         * cli/cli-utils.h (get_number_trailer): Declare.
3271         (get_number_const): Adjust documentation.
3272         * mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global
3273         thread IDs.
3274         * mi/mi-interp.c (mi_new_thread, mi_thread_exit)
3275         (mi_on_normal_stop, mi_output_running_pid, mi_on_resume):
3276         * mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise.
3277         * guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x):
3278         Likewise.
3279         * python/py-breakpoint.c (bppy_set_thread): Likewise.
3280         * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
3281         * python/py-infthread.c (thpy_get_num): Add comment and return the
3282         per-inferior thread ID.
3283         (thread_object_getset): Update comment of "num".
3284
3285 2016-01-13  Pedro Alves  <palves@redhat.com>
3286
3287         * breakpoint.c (remove_threaded_breakpoints)
3288         (print_one_breakpoint_location): Use print_thread_id.
3289         * btrace.c (btrace_enable, btrace_disable, btrace_teardown)
3290         (btrace_fetch, btrace_clear): Use print_thread_id.
3291         * common/print-utils.c (CELLSIZE): Delete.
3292         (get_cell): Rename to ...
3293         (get_print_cell): ... this and made extern.  Adjust call callers.
3294         Adjust to use PRINT_CELL_SIZE.
3295         * common/print-utils.h (get_print_cell): Declare.
3296         (PRINT_CELL_SIZE): New.
3297         * gdbthread.h (print_thread_id): Declare.
3298         * infcmd.c (signal_command): Use print_thread_id.
3299         * inferior.c (print_inferior): Use print_thread_id.
3300         * infrun.c (handle_signal_stop)
3301         (insert_exception_resume_breakpoint)
3302         (insert_exception_resume_from_probe)
3303         (print_signal_received_reason): Use print_thread_id.
3304         * record-btrace.c (record_btrace_info)
3305         (record_btrace_resume_thread, record_btrace_cancel_resume)
3306         (record_btrace_step_thread, record_btrace_wait): Use
3307         print_thread_id.
3308         * thread.c (thread_apply_all_command): Use print_thread_id.
3309         (print_thread_id): New function.
3310         (thread_apply_command): Use print_thread_id.
3311         (thread_command, thread_find_command, do_captured_thread_select):
3312         Use print_thread_id.
3313
3314 2016-01-13  Pedro Alves  <palves@redhat.com>
3315
3316         * NEWS: Mention InferiorThread.inferior.
3317         * python/py-infthread.c (thpy_get_inferior): New.
3318         (thread_object_getset): Register "inferior".
3319
3320 2016-01-13  Pedro Alves  <palves@redhat.com>
3321
3322         * NEWS: Mention $_inferior.
3323         * inferior.c (inferior_id_make_value): New.
3324         (inferior_funcs): New.
3325         (_initialize_inferior): Create $_inferior variable.
3326
3327 2016-01-13  Pedro Alves  <palves@redhat.com>
3328
3329         PR breakpoints/19388
3330         * frame.c (get_current_frame): Use validate_registers_access.
3331         * gdbthread.h (validate_registers_access): Declare.
3332         * infrun.c (validate_siginfo_access): Delete.
3333         (siginfo_value_read, siginfo_value_write): Use
3334         validate_registers_access.
3335         * thread.c (validate_registers_access): New function.
3336
3337 2016-01-12  Josh Stone  <jistone@redhat.com>
3338             Philippe Waroquiers  <philippe.waroquiers@skynet.be>
3339
3340         * NEWS (Changes since GDB 7.10): Mention QCatchSyscalls and the
3341         syscall_entry and syscall_return stop reasons.  Mention GDB
3342         support for remote catch syscall.
3343         * remote.c (PACKET_QCatchSyscalls): New enum.
3344         (remote_set_syscall_catchpoint): New function.
3345         (remote_protocol_features): New element for QCatchSyscalls.
3346         (remote_parse_stop_reply): Parse syscall_entry/return stops.
3347         (init_remote_ops): Install remote_set_syscall_catchpoint.
3348         (_initialize_remote): Config QCatchSyscalls.
3349         * linux-nat.h (struct lwp_info) <syscall_state>: Comment typo.
3350
3351 2016-01-12  Yao Qi  <yao.qi@linaro.org>
3352
3353         * nat/linux-ptrace.c (linux_child_function): Cast child_stack
3354         to gdb_byte * and pass to linux_fork_to_function.
3355
3356 2016-01-12  Yao Qi  <yao.qi@linaro.org>
3357
3358         * nat/linux-ptrace.c (linux_fork_to_function): Change type
3359         of argument 'function'.
3360         (linux_grandchild_function): Change return type to 'int'.
3361         Change child_stack's type to 'void *'.
3362         (linux_child_function): Likewise.
3363
3364 2016-01-12  Pedro Alves  <palves@redhat.com>
3365
3366         Remove use of the registered trademark symbol throughout.
3367
3368 2016-01-12  Thomas Schwinge  <thomas@codesourcery.com>
3369
3370         * reply_mig_hack.awk: Rewrite one regular expression.
3371
3372 2016-01-11  Mike Frysinger  <vapier@gentoo.org>
3373
3374         * acinclude.m4: Include new warning.m4 file.
3375         * configure: Regenerated.
3376         * configure.ac: Move all warning logic ...
3377         * warning.m4: ... here.
3378
3379 2016-01-08  Yao Qi  <yao.qi@linaro.org>
3380
3381         * extension.c: Include target.h.
3382         (set_active_ext_lang): Only call install_gdb_sigint_handler,
3383         check_quit_flag, and set_quit_flag if target_terminal_is_ours
3384         returns false.
3385         (restore_active_ext_lang): Likewise.
3386         * target.c (target_terminal_is_ours): New function.
3387         * target.h (target_terminal_is_ours): Declare.
3388
3389 2016-01-07  Maciej W. Rozycki  <macro@imgtec.com>
3390
3391         * mips-tdep.c (mips_breakpoint_from_pc): Rename local `status'
3392         to `err' in the little-endian leg.
3393
3394 2016-01-06  Yao Qi  <yao.qi@linaro.org>
3395
3396         * arch/arm-get-next-pcs.c (arm_get_next_pcs): Move it to some
3397         lines below.
3398         (thumb_get_next_pcs_raw): Make it static.
3399         (arm_get_next_pcs_raw): Likewise.
3400         * arch/arm-get-next-pcs.h (thumb_get_next_pcs_raw): Remove the
3401         declaration.
3402         (arm_get_next_pcs_raw): Likewise.
3403
3404 2016-01-05  Mike Frysinger  <vapier@gentoo.org>
3405
3406         * version.in: Change cvs to git.
3407
3408 2016-01-05  Mike Frysinger  <vapier@gentoo.org>
3409
3410         * configure.tgt (score-*-*): Delete gdb_sim assignment.
3411
3412 2016-01-05  Pedro Alves  <palves@redhat.com>
3413
3414         PR sim/13418
3415         * configure.ac: Define WITH_PPC_SIM when linking in the sim and
3416         the target is powerpc*.
3417         * rs6000-tdep.c (init_sim_regno_table): Check WITH_PPC_SIM instead
3418         of WITH_SIM.
3419         * configure: Regenerate.
3420         * config.in: Regenerate.
3421
3422 2016-01-04  Markus Metzger  <markus.t.metzger@intel.com>
3423
3424         * btrace.c (btrace_pt_readmem_callback): Do not return in TRY/CATCH.
3425
3426 2016-01-02  Mike Frysinger  <vapier@gentoo.org>
3427
3428         * configure.tgt (powerpc*-*-*): Delete test call and
3429         always assign gdb_sim.
3430
3431 2016-01-01  Joel Brobecker  <brobecker@adacore.com>
3432
3433         Update year range in copyright notice of all files.
3434
3435 2016-01-01  Joel Brobecker  <brobecker@adacore.com>
3436
3437         * top.c (print_gdb_version): Change copyright year in version
3438         message.
3439
3440 2016-01-01  Joel Brobecker  <brobecker@adacore.com>
3441
3442         * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2015.
3443
3444 For older changes see ChangeLog-2015.
3445 \f
3446 Local Variables:
3447 mode: change-log
3448 left-margin: 8
3449 fill-column: 74
3450 version-control: never
3451 coding: utf-8
3452 End: