* defs.h maint.c monitor.c remote-mips.c remote.c: Add support
[external/binutils.git] / gdb / ChangeLog
1 Thu Jun  8 15:06:00 1995  Stu Grossman  (grossman@cygnus.com)
2
3         * defs.h maint.c monitor.c remote-mips.c remote.c:  Add support
4         for `watchdog' variable.  This allows the user to put an upper
5         limit on the amount of time that GDB will wait for the target to
6         return from a step or continue operation.  This will primarily be
7         used for the testsuite, where it is difficult to come up with a
8         reasonable timeout for things like function calls, which can take
9         as long as three minutes under some circumstances.  If the
10         watchdog timer expires, GDB will generate an error that looks like
11         `Watchdog has expired.', and will detach from the target.
12
13         * remote-mips.c (mips_open):  Setup initial frame from target.
14         Print it out so that user is told where the program is stopped
15         when they attach.
16
17         * remote-nrom.c:  Loads of cleanups.  Use serial code to open
18         network connections.  Use expect() to wait for response to
19         download command.
20
21         * ser-tcp.c (tcp_open):  Retry connection if we get ECONNREFUSED.
22
23         * serial.c serial.h (serial_open serial_fdopen serial_close):
24         Allow users to open the same device multiple times.  They all get
25         to share the same serial_t.  This is about the only way to have
26         multiple active targets use the same device (for download and
27         debug).
28
29         * sparcl-tdep.c:  Keep #include <unistd.h> away from GO32.
30
31         * target.c:  Add `targetdebug' variable.  If this is non-zero,
32         then a special target is put at the top of the target stack which
33         will cause all calls through the target vector to have their args
34         and results printed out.
35
36 Wed Jun  7 17:40:37 1995  Per Bothner  <bothner@kalessin.cygnus.com>
37
38         * ch-exp.y: Handle <primitive_value> "->" <modename>.
39
40 Wed Jun  7 17:46:33 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
41
42         * mem-break.c (LITTLE_BREAKPOINT): If BREAKPOINT and
43         {LITTLE,BIG}_BREAKPOINT are all defined, don't redefine.
44         (BIG_BREAKPOINT): Ditto.
45
46         * config/rs6000/tm-rs6000.h (BREAKPOINT): Define as either
47         BIG_BREAKPOINT or LITTLE_BREAKPOINT depending on the target byte
48         order.
49
50 Wed Jun  7 12:41:42 1995  Jeff Law  (law@snake.cs.utah.edu)
51
52         * somsolib.c (som_solib_section_offsets): Handle relative pathnames.
53
54         * hppa-tdep.c (frame_saved_pc): Handle backtracing through signal
55         handler in dynamically linked executables.
56
57 Tue Jun  6 10:44:25 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
58
59         From Andrew Cagney <cagney@highland.com.au>
60         * rs6000-tdep.c (single_step): Handle both little and big endian
61         breakpoints.
62         (gdb_print_insn_powerpc): Deal with disassembling both little and
63         big endian PowerPC systems.
64         (_initialize_rs6000_tdep): Use gdb_print_insn_powerpc to handle
65         disassembly, rather that assuming big endian order.
66
67         * config/rs6000/tm-rs6000.h (BREAKPOINT): Delete.
68         (BIG_BREAKPOINT): Define, big endian breakpoint instruction.
69         (LITTLE_BREAKPOINT): Define, little endian breakpoint instruction.
70
71 Sat Jun  3 01:54:56 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
72
73         * README:  Add note about Unixware 2.x.
74
75         * dbxread.c (process_one_symbol):  Check for exact symbol name
76         match when fixing up N_GSYM and N_STSYM symbols from Sun acc.
77
78         * valprint.c (value_print_array_elements):  Use
79         fprintf_filtered to put out `<repeats %u times>',
80         from schwab@issan.informatik.uni-dortmund.de (Andreas Schwab).
81
82         * value.h (struct value):  Change `repetitions' field from
83         `short' to `int' type.
84
85 start-sanitize-arc
86 Fri Jun  2 11:17:23 1995  Doug Evans  <dje@canuck.cygnus.com>
87
88         * arc-tdep.c (arc_bfd_mach_type): New static global.
89         (codestream_fill): Handle byte order differences.
90         (setup_prologue_scan): Don't read stdarg function's "sub sp,sp,N".
91         (arc_get_frame_setup): Read it here.
92         (arc_frame_saved_pc): And here.
93         (arc_print_insn): New function.
94         (arc_set_cpu_type): Set arc_bfd_mach_type.  Don't set tm_print_insn.
95         (_initialize_arc_tdep): Set tm_print_insn to arc_print_insn.
96 end-sanitize-arc
97
98 Wed May 31 12:04:01 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
99
100         * nlm/{configure.in, Makefile.in}: Converted to use autoconf.
101         * nlm/configure: New file, generated with autoconf 2.3.
102
103         * nlm/configure.in: Use sed instead of awk to get the value of
104           cpufile.  Awk is not a utility required by the GNU coding
105           standards.  This change also fixes the rigid whitespace
106           requirements that were required for awk.
107
108         * sparclite/aload.c: Use a file descriptor instead of a stdio
109           stream for i/o with target board.
110           Use #error if HAVE_TERMIOS is not defined.
111
112         * sparclite/{Makefile.in, configure.in}: Converted to use
113           autoconf.
114         * sparclite/configure: New file, generated with autoconf 2.3.
115
116 Sun May 28 23:10:07 1995  Jeff Law  (law@snake.cs.utah.edu)
117
118         * defs.h: Include either varargs.h or stdarg.h (for va_list).
119         Fix stupid thinko in last change ("..." -> "va_list").
120
121         * defs.h (vprintf_filtered declaration): Add PARAMS prototype;
122         gcc-2.5 chokes on format attributes for unprototyped functions.
123         (vfprintf_filtered declaration): Likewise.
124         (vprintf_unfiltered declaration): Likewise.
125         (vfprintf_unfiltered). Likewise.
126
127 Sat May 27 23:54:17 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
128
129         * configure.in: Use sed instead of awk to get the values of
130           hostfile, targetfile and nativefile.  Awk is not a utility
131           required by the GNU coding standards.  This change also 
132           fixes the rigid whitespace requirements that were required
133           for awk.
134         * configure: regenerated.
135
136 Sat May 27 16:24:04 1995  Angela Marie Thomas  <angela@cirdan.cygnus.com>
137
138         * sparclite/{Makefile,configure}.in: Add hooks for building with
139         -lsocket & -lnsl for solaris2.  Don't build aload/eload for DOS.
140
141 Thu May 25 12:46:37 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
142
143         * gdbserver/remote-utils.c (prepare_resume_reply): Add FIXME
144         comment regarding signal numbering.
145
146 Wed May 24 15:49:47 1995  Steve Chamberlain  <sac@slash.cygnus.com>
147
148         * arm-tdep.c (_initialize_arm_tdep): Use print_insn_little_arm
149         now.
150
151         * arm-tdep.c (convert_from_extended, convert_to_extended):
152         New.
153         * coffread.c (enter_linenos): Return if linetab 0.
154         * config/arm/arm.mt (TDEPFILES): Add simulator support.
155         * config/arm/tm-arm.h (FRAME_FIND_SAVED_REGS): Fix prototypes.
156
157 Mon May 22 19:37:21 1995  Rob Savoye  <rob@darkstar.cygnus.com>
158
159         * config/idt.mt: replace monitor and array-rom with the new
160         remote-array.
161
162 Mon May 22 15:38:25 1995  Stu Grossman  (grossman@cygnus.com)
163
164         * remote-nindy.c:  Install Kung patch for PR 6820.  I have no idea
165         what this does...
166
167         * breakpoint.c:  Move defaults of watchpoint related macros into
168         target.h.
169         * target.h:  Macros from breakpoint.c.  Conditionalize based on
170         TARGET_HAS_HARDWARE_WATCHPOINTS.
171         * i386v-nat.c procfs.c:  Use TARGET_HAS_HARDWARE_WATCHPOINTS
172         instead of TARGET_CAN_USE_HARDWARE_WATCHPOINT to enable watchpoint
173         code.
174         * config/i386/nm-linux.h, config/mips/nm-irix4.h,
175         config/pa/nm-hppab.h, config/sparc/tm-sparclite.h:  #define
176         TARGET_HAS_HARDWARE_WATCHPOINTS to enable watchpoint code.
177
178 Mon May 22 06:47:30 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
179
180         * breakpoint.c, target.h: Move defaults of watchpoint related
181         macros back to breakpoint.c.  Required to get GDB compiling
182         on Solaris again.
183
184 Fri May 19 14:49:37 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
185
186         * defs.h (ATTR_FORMAT): New macro, expands to gcc's format
187           attribute when compiled by gcc.  
188         * defs.h, language.h, monitor.h: Changed many function
189           declarations to use ATTR_FORMAT.
190
191         * breakpoint.c (delete_command); source.c (directory_command);
192           top.c (define_command): Changed call to query() that had too
193           many arguments.
194         * printcmd.c (address_info): Changed call to printf_filtered()
195           that had too many arguments.
196
197 Fri May 19 09:52:07 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
198
199         * infrun.c (wait_for_inferior): Move assignments to stop_signal
200         and stop_pc, and STOPPED_BY_WATCHPOINT code, back where they
201         were--after the switch statement on w.kind.  You can't read the
202         registers of an inferior which has exited.  Use a goto in the
203         STOPPED_BY_WATCHPOINT code.
204         * infrun.c (wait_for_inferior): Reinstate
205         HAVE_STEPPABLE_WATCHPOINT and HAVE_CONTINUABLE_WATCHPOINT code.
206
207 Fri May 19 06:15:40 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
208
209         * utils.c, complaints.c, language.c, monitor.c, remote-array.c,
210         remote-mips.c, remote-os9k.c, remote-st.c: Conditionalize use of
211         stdarg rather than varargs on ANSI_PROTOTYPES not __STDC__; it
212         must match the definition of PARAMS.
213 start-sanitize-gdbtk
214         * gdbtk.c: Likewise.
215 end-sanitize-gdbtk
216
217 Thu May 18 15:58:46 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
218
219         * utils.c (fprintf_filtered, fprintf_unfiltered, fprintfi_filtered,
220           printf_filtered, printf_unfiltered, printfi_filtered, query, warning,
221           error, fatal, fatal_dump_core): Use stdarg.h macros when compiling 
222           with an ANSI compiler.
223         * complaints.c (complain): Likewise.
224         * language.c (type_error, range_error): Likewise.
225         * monitor.c (monitor_printf, monitor_printf_noecho): Likewise.
226         * remote-array.c (printf_monitor, debuglogs): Likewise.
227         * remote-mips.c (mips_error): Likewise.
228         * remote-os9k.c (printf_monitor): Likewise.
229         * remote-st.c (printf_stdebug): Likewise.
230 start-sanitize-gdbtk
231         * gdbtk.c (gdbtk_query): Likewise.
232 end-sanitize-gdbtk
233
234         * defs.h, complaints.h, language.h, monitor.h: Add prototypes to
235           match above changes.
236
237         * printcmd.c: Remove uneeded #include <varargs.h>.
238         * remote-e7000.c: Likewise.
239
240         * f-typeprint.c (f_type_print_base): Fix typo found by above
241           changes.
242
243 Wed May 17 11:21:32 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
244
245         * Makefile.in (xcoffread.o): Depend on partial-stab.h.
246
247         * xcoffsolib.c (sharedlibrary_command): New command.
248         * xcoffsolib.c (solib_info): Call xcoff_relocate_symtab.
249         * xcoffsolib.c: Miscellaneous cleanups.
250
251         * partial-stab.h: Ignore symbol descriptor '-' (for local
252         variables with negative type numbers) without complaint.
253
254         * rs6000-nat.c (vmap_ldinfo): Use bfd_stat rather than our own
255         local emulation thereof.  Remove unused variable ostart.
256
257 Wed May 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
258
259         * Makefile.in (config.status): changed target so that
260           config.status --recheck is executed if configure script changes.
261
262         * monitor.c (monitor_printf): Changed format specification in
263           error message to work with pre-ansi compilers.
264           (monitor_load_srec): reduced length of s-records from 128 to 32
265           bytes so download is more reliable with the rom68k monitor.
266
267         * rom68k-rom.c: Added trailing space to prompt string.
268
269         * config/i386/xm-i386sco.h (HAVE_STRSTR): Removed.
270         * config/i386/xm-go32.h, mswin/xm.h (SYS_SIGLIST_MISSING):
271           Removed.
272         * defs.h, config/{xm-lynx.h, xm-nbsd.h},
273           config/i386/{xm-i386bsd.h, xm-linux.h},
274           config/m68k/xm-hp300bsd.h, config/mips/xm-irix4.h,
275           config/ns32k/xm-ns32km3.h, doc/gdbint.texinfo
276           (PSIGNAL_IN_SIGNAL_H): Removed.
277
278 Tue May 16 13:16:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
279
280         * Makefile.in (Makefile): Added config.status to dependency list.
281
282         * configure.in: Added INIT-CMDS argument to AC_OUTPUT which sets
283           gdb_host_cpu, gdb_target_cpu and nativefile.
284         * configure: regenerated.
285
286 Mon May 15 23:50:51 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
287
288         * mdebugread.c (parse_symbol):  Do not relocate stBlock/scText
289         symbols, their value is the displacement from the procedure address.
290         * top.c (init_main):  Add missing newlines to help strings for
291         `if' and `while' commands, fix help string for `show commands'.
292
293 Mon May 15 18:37:56 1995  Stu Grossman  (grossman@cygnus.com)
294
295         * breakpoint.c:  Move defaults of watchpoint related macros into
296         target.h.  Use BP_TEMPFLAG and BP_HARDWAREFLAG instead of
297         constants.
298         * infrun.c (wait_for_inferior):  Enhance comment near
299         STOPPED_BY_WATCHPOINT.
300         * target.h:  Macros from breakpoint.c.
301
302 Mon May 15 17:11:38 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
303
304         * config/i386/{i386sol2.mh, i386v4.mh, ncr3000.mh},
305           config/m68k/m68kv4.mh, config/mips/{irix4.mh, irix5.mh,
306           mipsv4.mh}, config/sparc/sun4so2.mh (INSTALL): Removed, figured
307           out by autoconf.
308         * config/apollo68v.mh (RANLIB): Removed, figured out by autoconf.
309
310         * Makefile.in, configure.in: Converted to use autoconf
311         * aclocal.m4: New file, local autoconf macro definitions.
312         * configure: New file, generated with autoconf 2.3.
313
314 Mon May 15 14:46:41 1995  Stan Shebs  <shebs@andros.cygnus.com>
315
316         * remote.c (remote_kill): Add prototype.
317         * cpu32bug-rom.c (cpu32bug_open): Properly define as static.
318         * config/h8300/h8300hms.mt (TDEPFILES): Add monitor.o.
319
320 Mon May 15 12:12:34 1995  Stu Grossman  (grossman@cygnus.com)
321
322         * sparclite/salib.c (win_ovf win_unf):  Make window size constant
323         into a variable (__WINSIZE) so that it can be controlled via the
324         .h file.
325         * sparclite/sparclite.h:  Add SL933 #ifdef to set __WINSIZE to 6
326         for the 933 board.
327
328         * infrun.c:  Add #ifdef HP_OS_BUG to all references to
329         trap_expected_after_continue.
330         * (wait_for_inferior):  Fix for remote watchpoints.  Don't try to
331         insert breakpoints while target is running (this only works on
332         *some* native targets).  This may also speed up native watchpoints
333         considerably.
334
335 Sat May 13 13:55:04 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
336
337         * dwarfread.c (struct dwfinfo), dbxread.c (struct symloc),
338         mdebugread.c (struct symloc), hpread.c (struct symloc),
339         xcoffread.c (struct symloc): Fix inaccurate comment introduced
340         20 Apr 1995.
341
342 Sat May 13 13:34:18 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
343
344         * rs6000-tdep.c (find_toc_address): Revise comment.
345         * symfile.c, symfile.h (init_psymbol_list): New function;
346         consolidate duplicated copies from os9kread.c, dbxread.c
347         and dwarfread.c.
348         * defs.h: Declare info_verbose.
349         * xcoffread.c: Extensive changes to support psymtabs.
350
351 Fri May 12 13:48:41 1995  Stu Grossman  (grossman@andros.cygnus.com)
352
353         * cpu32bug-rom.c remote-est.c rom68k-rom.c:  Update line_term element.
354
355 Fri May 12 06:39:30 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
356
357         * partial-stab.h: Expand comments.
358
359 Thu May 11 19:01:37 1995  Jeff Law  (law@snake.cs.utah.edu)
360
361         * Support debugging using native MACH primitives on hppa*-*-osf*.
362         * configure.in: hppa*-*-osf* != hppa*-*-bsd* anymore.
363         * config/pa/hppaosf.mh: New file.
364         * config/pa/nm-hppao.h: Likewise.
365         * hppam3-nat.c: Likewise.
366         * config/pa/tm-hppao.h (PSW_SS): Define for single-stepping.
367         (MACHINE_CPROC_*_OFFSET): Define.
368         (TRACE_*): Define.
369         (START_INFERIOR_TRAPS_EXPECTED): Delete definition.
370
371 Wed May 10 18:59:26 1995  Stu Grossman  (grossman@andros.cygnus.com)
372
373         * hppa-tdep.c (read_unwind_info):  Cosmetic cleanup.
374         * (unwind_command):  Clean it up and make it print things out
375         nicer.
376         * monitor.c:  Add ^C handling capability (mostly ripped off from
377         remote.c).
378         * (monitor_printf):  Make it check the command echo.
379         * (monitor_printf_noecho):  Similar to above, but doesn't check
380         for echo.
381         * (monitor_stop):  No longer waits for prompt.  That is the job of
382         the caller.  This makes things work much better for monitor_wait,
383         which waits for the prompt itself.
384         * (monitor_open):  Deal with new monitor_stop semantics.  Also,
385         flush input after sending init strings to get rid of junk that may
386         be output.  Also, don't always send \r to remote.  Use
387         monitor_ops->line_term cuz proper character isn't always \r.
388         * (monitor_fetch_register):  Switch to completely different
389         algorithm to deal with lame-ass monitors which put spaces in the
390         middle of numbers, and prompt with a space!!!!!
391         * (monitor_read_memory_single):  New routine to be used with
392         monitors that can only return one byte/short/long at a time.  This
393         is selected via MO_GETMEM_READ_SINGLE.
394         * (monitor_load_srec):  Use monitor_printf_noecho for sending S
395         records.  Most targets don't echo them.
396         * (monitor.h):  Get rid of cmd_delim.  Add line_delim.
397         * op50n-rom.c (op50n_cmds):  Fill it up.  Make it work.
398         * w89k-rom.c:  Change all eols from \r to \n.  Change load_resp to
399         ^Q to prevent error message.
400         * config/pa/tm-hppa.h (CALL_DUMMY (for hppro)):   Add special
401         instruction sequence at end to make restore_pc_queue happy.
402
403 Wed May 10 15:59:00 1995  Torbjorn Granlund  <tege@adder.cygnus.com>
404
405         * remote-est.c (est_open): Make static to match prototype.
406
407 Tue May  9 16:58:50 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
408
409         * configure.in: Add little endian PowerPC support.
410         * config/powerpc/ppcle-eabi.mt: New file for little endian PowerPC
411         support.
412         * config/powerpc/tm-ppcle-eabi.h: ditto.
413
414 Mon May  8 12:11:38 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
415
416         * nlm/configure.in (gdb_host, gdb_host_cpu, gdb_target): Removed.
417           These variables not used.
418
419         * config/m68k/monitor.mt (TDEPFILES): Added cpu32bug-rom.o.
420
421 Wed May  3 17:54:47 1995  Stan Shebs  <shebs@andros.cygnus.com>
422
423         * monitor.c (monitor_command): Don't use PROMPT until monitor
424         target is known to be open.
425         (monitor_make_srec): Don't define size of hextab.
426
427 Tue May  2 18:32:24 1995  Stan Shebs  <shebs@andros.cygnus.com>
428
429         * configure.in (--enable-netrom): New configuration option.
430         * Makefile.in (REMOTE_OBS): Rename from REMOTE_O, append
431         value of NETROM_OBS.
432         (NETROM_OBS): New variable.
433         * remote-nrom.c: New file, NetROM target support.
434         * config/a29k/a29k-udi.mt, config/i960/vxworks960.mt: Use
435         REMOTE_OBS instead of REMOTE_O.
436 start-sanitize-arc
437         * config/arc/arc.mt: Ditto.
438 end-sanitize-arc        
439
440 Fri Apr 28 23:30:00 1995  Stu Grossman  (grossman@cygnus.com)
441
442         * array-rom.c (_initialize_array array_open):  Move baud_rate
443         initialization from _initxxx to array_open to fix bug with
444         overriding -b command line option.
445
446 Thu Apr 27 20:29:34 1995  Doug Evans  <dje@canuck.cygnus.com>
447
448         * Makefile.in (RUNTEST): Fix reference of `srcdir'.
449
450 Wed Apr 26 19:01:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
451  
452         * remote-hms.c: Rewrite to use new monitor conventions.
453
454 Tue Apr 25 11:27:14 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
455
456         * dbxread.c: Add comment explaining lowest_text_address.
457         Add comment regarding stringtab_global and psymtabs.
458
459 Sat Apr 22 01:26:29 1995  Jeff Law  (law@snake.cs.utah.edu)
460
461         * config/pa/tm-hppa.h (EXTRACT_STRUCT_VALUE_ADDRESS): Fix.
462
463         * config/pa/tm-hppa.h (EXTRACT_RETURN_VALUE): Rewrite to correctly
464         handle "short", "int" and small structures returned in registers. 
465
466 Fri Apr 21 12:57:53 1995  Kung Hsu  <kung@mexican.cygnus.com>
467
468         * minsyms.c: add new function lookup_minimal_symbol_text, to look
469         for text symbol only.
470         * breakpoint.c (create_longjmp_breakpoint): call
471         lookup_minimal_symbol_text instead of lookup_minimal_symbol.
472         * symtab.h: add lookup_minimal_symbol_text prototype.
473
474 Fri Apr 21 12:03:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
475
476         * sh-tdep.c (sh-opc.h): Don't include.
477         (gdbcore.h): Include.
478         (frame_find_saved_regs): Remove unused local.
479
480 Thu Apr 20 10:12:21 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
481
482         * dwarfread.c (struct dwfinfo), dbxread.c (struct symloc),
483         mdebugread.c (struct symloc), hpread.c (struct symloc): Clean
484         up comments.
485
486 Wed Apr 19 16:58:11 1995  Stu Grossman  (grossman@andros.cygnus.com)
487
488         * hppa-tdep.c (deposit_17):  New routine to deposit 17 bit
489         constants into PA instructions.
490         * Put #ifdefs around all signal handling code.  Not generally
491         needed for embedded boards.
492         * (hppa_fix_call_dummy):  Parameterize offsets into call dummy to
493         allow different dummys to be used by this code.  Use
494         INSTRUCTION_SIZE instead of REGISTER_SIZE for things.
495         Conditionalize setup of _sr4export fixup.  Improve comments.
496         * config/pa/tm-hppa.h:  Define INSTRUCTION_SIZE.  Use a different
497         call dummy if PA_LEVEL_0 is defined.  Better comments for call
498         dummys.  Define offsets for LDIL/LDO instructions which load
499         function addresses.
500         * config/pa/tm-pro.h:  Get rid of signal handling stuff.  Define
501         PA_LEVEL_0 to disable mucking with space regs and such.
502
503 Mon Apr 17 15:37:08 1995  Stu Grossman  (grossman@andros.cygnus.com)
504
505         * cpu32bug-rom.c monitor.h op50-rom.c remote-est.c rom68k-rom.c
506         w89k-rom.c:  Remove loadtypes, loadprotos and baudrates.
507         * op50-rom.c:  Fix copyrights and add load routine to op50n_cmds.
508         * rom68k-rom.c (_initialize_rom68k):  Don't set baud rate.
509         * w89k-rom.c:  Fix copyrights.
510
511 Sun Apr 16 14:00:55 1995  Stu Grossman  (grossman@andros.cygnus.com)
512
513         * monitor.c:  Move all xmodem stuff into xmodem.[ch].  Remove
514         unnecessary remoteloadprotocol and remoteloadtype support.
515         * (expect expect_prompt):  Change names to monitor_expect and
516         monitor_expect_prompt.  Make them global.
517         * (printf_monitor):  Change name to monitor_printf.  Make global.
518         * (monitor_read_memory):  Flush command echo to avoid parsing
519         ambiguity with CPU32Bug monitor.
520         * (monitor_load):  Remove remoteloadprotocol and remoteloadtype
521         support.  Call target_ops->load_routine, default to
522         monitor_load_srec.
523         * (monitor_load_srec):  Remove everything but S-record support.
524         * monitor.h (monitor_ops):  Add load_routine to provide monitor
525         specific download capability.
526         * remote-est.c:  Clean up copyrights and comments.
527         * w89k-rom.c:  Use new xmodem support.
528         * xmodem.c xmodem.h:  New files to support xmodem downloads.
529         * rom68k-rom.c remote-est.c:  Fix copyrights, add load_routine
530         entry to monitor_ops.
531         * cpu32bug-rom.c:  New file to support Moto BCC debuggers.
532         * config/m68k/est.mt (TDEPFILES):  Add cpu32bug.o.
533         * config/pa/hppapro.mt (TDEPFILES):  Add xmodem.o.
534
535 Sat Apr 15 18:00:15 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
536
537         * rem-multi.shar: Removed; superceded by gdbserver.
538
539 Fri Apr 14 12:10:24 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
540
541         * xcoffread.c (xcoff_sym_fns): Revise comment about merging this
542         with coffread.c.
543
544         * breakpoint.c (fixup_breakpoints): Removed.
545         * rs6000-nat.c (vmap_symtab): Don't call fixup_breakpoints.
546         (vmap_ldinfo, xcoff_relocate_core): Call breakpoint_re_set.
547
548         * coffread.c (coff_symfile_offsets): Allocate SECT_OFF_MAX
549         sections, not just SECT_OFF_MAX-1.
550
551         * rs6000-nat.c (vmap_symtab), xcoffread.c: Re-do section offsets
552         to be indexed by SECT_OFF_* instead of xcoff section numbers.
553         * objfiles.c, remote.c: Remove comments regarding SECT_OFF_*.
554         * symtab.h: Revise comment about block_line_section.
555         * rs6000-nat.c (vmap_symtab): Don't relocate objfile->sections.
556
557 Sat Apr 15 14:15:14 1995  Stan Shebs  <shebs@andros.cygnus.com>
558
559         * mpw-make.in (init.c): Don't try to do symbolic {o} in sed
560         command, not allowed by some version of MPW Make.
561         * ser-mac.c (mac-setbaudrate): Make it actually set baud rates.
562
563 Sat Apr 15 14:05:09 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
564
565         * alpha-tdep.c (alpha_push_arguments): Fix typo (TYPE_VALUE ->
566         VALUE_TYPE).  Do the cast for TYPE_CODE_BOOL, TYPE_CODE_CHAR,
567         TYPE_CODE_ENUM, and TYPE_CODE_RANGE as well as TYPE_CODE_INT.
568
569 Sat Apr 15 14:04:32 1995  Per Bothner  <bothner@cygnus.com>
570
571         * alpha-tdep.c (alpha_push_arguments): Only cast to long for
572         TYPE_CODE_INT.
573
574 start-sanitize-gdbtk
575 Sat Apr 15 13:52:24 1995  Stan Shebs  <shebs@andros.cygnus.com>
576
577         * gdbtk.c (gdb_disassemble): Read from inferior if connected
578         to a VxWorks target.
579
580 Fri Apr 14 10:18:20 1995  Stu Grossman  (grossman@cygnus.com)
581
582         * README.GDBTK:  New file.  Contains the obvious.
583 end-sanitize-gdbtk
584
585 Thu Apr 13 16:17:04 1995  Rob Savoye  <rob@darkstar.cygnus.com>
586
587         * remote-array.c: New file for Array Tech LSI33k based controller
588         board.
589
590 Thu Apr 13 12:23:31 1995  Kung Hsu  <kung@rtl.cygnus.com>
591
592         * a29k-tdep.c (get_longjmp_target): Replace SWAP_TARGET_AND_HOST with
593         extract_address.
594         * remote-vxsparc.c: New file, preliminary check in, this configuration
595         not supported yet. 
596         * remote-vxmips.c: ditto.
597
598 Thu Apr 13 12:10:14 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
599
600         * rs6000-tdep.c (xcoff_add_toc_to_loadinfo): Don't use a prototype
601         to declare the function.
602
603 Wed Apr 12 16:40:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
604
605         * monitor.h (init_monitor_ops): Declare.
606         * rom68k-rom.c: Clarify some comments.
607         (rom68k_open): Define as static, to match decl.
608
609 Wed Apr 12 16:36:44 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
610
611         * gdb.gdb: New file.
612         * .gdbinit: Move list-objfiles to gdb.gdb.
613
614         * values.c (set_internalvar): Set modifiable flag of newval.
615
616 Wed Apr 12 14:34:31 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
617
618         * xcoffread.c: Call complain() rather than error() or printing a
619         warning.
620
621 start-sanitize-arc
622 Wed Apr 12 08:15:27 1995  Doug Evans  <dje@canuck.cygnus.com>
623
624         * arc-tdep.c: #include "gdbcmd.h".
625         (codestream_seek): Pass CORE_ADDR.
626         (arc_cpu_type, tmp_arc_cpu_type, arc_cpu_type_table): New globals.
627         (debug_pipeline_p): Likewise.
628         (X_...): Instruction field access macros.
629         (BUILD_INSN): Define.
630         (codestream_tell): Allow for stream elements > 1 byte.
631         (codestream_fill): Likewise.
632         (setup_prologue_scan): New function.
633         (arc_get_frame_setup): Call it.  Update to current spec
634         regarding prologues.  Use BUILD_INSN.
635         (skip_prologue): New argument `frameless_p'.  Use BUILD_INSN.
636         (arc_frame_saved_pc): New function.
637         (frame_find_saved_regs): Use BUILD_INSN.
638         (get_insn_type, single_step): New functions.
639         (one_stepped): New global.
640         (arc_set_cpu_type_command, arc_show_cpu_type_command): New functions.
641         (arc_set_cpu_type): New function.
642         (_initialize_arc_tdep): Define new `set' commands `cpu',
643         `displaypipeline', and `debugpipeline'.
644         * remote-arc.c (break_insn): Add bi-endian support.
645         (arc_insert_breakpoint): Likewise.
646         (arc_remove_breakpoint): Likewise.
647         (switch_command): Delete.
648         * arc/tm-arc.h (TARGET_BYTE_ORDER): Delete.
649         (TARGET_BYTE_ORDER_SELECTABLE): Define.
650         (DEFAULT_ARC_CPU_TYPE): Define.
651         (SKIP_PROLOGUE_FRAMELESS_P): Define.
652         (BREAKPOINT): Delete.
653         (BIG_BREAKPOINT, LITTLE_BREAKPOINT): Define.
654         (DECR_PC_AFTER_BREAK): Change to 8.
655         (NO_SINGLE_STEP): Define.
656         (ARC_PC_TO_REAL_ADDRESS): Define.
657         (SAVED_PC_AFTER_CALL): Use it.
658         (NUM_REGS, REGISTER_BYTES): Fix.
659         (FRAME_SAVED_PC): Call arc_frame_saved_pc.
660         (FRAME_LOCALS_ADDRESS): Fix.
661 end-sanitize-arc
662
663 Tue Apr 11 16:42:37 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
664
665         * top.c, utils.c, defs.h: Remove error_hook.  It is currently
666         unused and would need to hook into error_begin()/return_to_top_level(),
667         instead of error(), if it were to be used.
668
669 Tue Apr 11 13:46:25 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
670
671         * utils.c, defs.h (warning_begin): Renamed from warning_setup, for
672         consistency with error_begin.  Also print warning_pre_print.
673         Document it better.
674         * utils.c (warning): Use it.
675         * utils.c (error_begin): Doc fix.
676         * rs6000-nat.c (vmap_ldinfo): If we don't find ldinfo for the
677         symfile_objfile, nuke it.
678
679 Tue Apr 11 09:35:20 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
680
681         * printcmd.c (print_address_numeric): Pass use_local to
682         print_longest, rather than always passing 1.
683
684         * nlm/Makefile.in: Remove comments discussing munch.
685
686 start-sanitize-gdbtk
687 Tue Apr 11 11:07:12 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
688
689         * gdbtk.c (gdbtk_init): If SIOCSPGRP is not available, but
690         F_SETOWN is, use that.
691 end-sanitize-gdbtk
692
693 Mon Apr 10 18:31:57 1995  Stan Shebs  <shebs@andros.cygnus.com>
694         
695         Merge in support for Mac MPW as a host.
696         (Old change descriptions retained for informational value.)
697
698         * mpw-config.in (i386-unknown-go32): Change from aout.
699         (sh-hitachi-hms): New target.
700         * mpw-make.in (BISON): Use byacc instead of bison.
701         (VERSION): Bump to 4.14.1.
702         (*-pinsn.*): Remove mentions everywhere.
703         (all): Don't build MacGDB.
704         (gdb, SiowGDB): Depend on Version.r.
705         (Version.r): Generate from version info.
706         * main.c (main): Pass program name to START_PROGRESS, END_PROGRESS.
707         (main) [MPW]: Remove debugging hook.
708         * mac-xdep.c (debug_openp): New flag.
709         (mac_init): Set flag if env variable defined.
710         * ser-mac.c (mac_open): Clarify error message.
711         (mac_readchar): Call PROGRESS while looping.
712         (mac_write): Call sleep instead of sec_sleep.
713         (sec_sleep): Remove.
714         * source.c (openp) [MPW]: Only print debugging info if debugging.
715         * utils.c (query) [MPW]: Clarify that behavior is a bug.
716
717         * mpw-make.in (init.c): Use open-brace instead of mpw-open-brace.
718
719         * main.c, source.c: Remove hacks that replace long strings
720         with shorter ones, now solved portably.
721
722         * config/m68k/xm-mpw.h (spin.h): Include.
723         (ALMOST_STDC): Only define if MPW_C.
724         * config/m68k/tm-mac.h: New file, Mac target definitions.
725
726         * mpw-config.in (m68k-apple-macos, ppc-apple-macos,
727         i386-unknown-aout): New targets.
728         (mk.tmp): Add *DEPFILES definitions.
729         * mpw-make.in: Remove gC rules, clean up definitions for other
730         include files, bump version, fix bogus \ that should be \Option-d.
731         (init.c): Build correctly.
732
733         * mpw-make.in (HFILES_NO_SRCDIR): Add somsolib.h
734         (ALLDEPFILES): Add somsolib.c.
735         (somsolib.o): Add some dependencies.
736
737         * mpw-config.in: Use nm-empty.h if host is not target.
738         (xdepfiles): Add mac-xdep.c.o.
739         (xm_file): Remove.
740         * mpw-make.in: Add Fortran files.
741         (XDEPFILES): Remove.
742
743         * mpw-config.in (MacSerial.h): Duplicate from standard Serial.h.
744         * ser-mac.c (MacSerial.h): Include instead of Serial.h.
745
746         * mpw-make.in: Use {s} instead of {srcdir} everywhere.
747         (bindir, libdir): Remove extra colon.
748         (source.c): Compile with C instead of gC.
749         (c-exp.tab.c, ch-exp.tab.c, m2-exp.tab.c): Add {o}.
750         (install-only): Don't install MacGDB.
751         * source.c (openp) [MPW]: Add a debugging display.
752         (open_source_file) [MPW]: Use MPW basename finders.
753         [MPW_C]: Briefer versions of help for line and list commands.
754
755         * mpw-make.in: Change references from paread.c to somread.c
756
757         * mpw-make.in (VERSION): Update to 4.12.3.
758         (SiowGDB): New target, GDB using SIOW library.
759         (init-new.c): New target, attempt to generate init.c from sources.
760         (main.c.o, top.c.o): Put each in its own segment.
761         * main.c (main) [MPW]: Always call mac_init.
762         * utils.c (query) [MPW]: Always return "yes" if in MacGDB, output
763         an extra newline otherwise.
764         * mac-xdep.c: More comments in various places, remove junk.
765         (mac_init): Add tests for MPW and SIOW.
766         (use_wne, has_color_qd): Renamed.
767         (use_color_qd): New variable.
768         (grow_window): Only do console resizing to console window,
769         call resize_console_window.
770         (zoom_window): Call resize_console_window.
771         (resize_console_window, scroll_text): New functions.
772         (adjust_console_sizes): Always align viewrect to even multiples of
773         text lines.
774         (adjust_console_text): Always scroll by whole lines.
775         (hacked_vfprintf, hacked_puts, hacked_fputc, hacked_putc): Force a
776         recalculation of scroll positions if a newline was output.
777         (hacked_fflush): Similarly, for flushing.
778         (hacked_fgetc): New function, aborts if called in MacGDB.
779         * ser-mac.c (mac_readchar): Rename starttime to start_time,
780         remove debugging printf.
781         (mac_write): Sleep on first 4 writes.
782         (sec_sleep): New function, works like standard sleep.
783         * macgdb.r: Adjust positioning and contents of About box.
784         Set minimum size to 2000K, preferred size to 5000K.
785         * config/m68k/xm-mpw.h (fgetc): Define as a macro.
786
787         * mpw-make.in (.c.o, .gc.o): Prefix segment names with gdb_.
788         (top.c.o, annotate.c.o): Add build rules.
789         * macgdb.r (SysTypes.r): Include.
790         ('vers'): New resource, version info.
791         (mFile, mEdit, mDebug): Enable all menu items.
792         (mDebug): Add key equivalents for continue, step, next.
793         (wConsole): Add zoom and close boxes to window.
794         * mac-xdep.c (new_console_window): New function, code taken from
795         mac_init.
796         (mac_command_loop): Use GetCaretTime for wait interval, call
797         do_idle on null events.
798         (do_idle): New function.
799         (zoom_window): Implement zooming.
800         (v_scroll_proc): New function, handles vertical scrolling.
801         (activate_window): Do activation of console window.
802         (do_menu_command): Implement items of file, edit, and debug menus.
803         (do_keyboard_command): Fix command extraction.
804         (adjust_console_sizes, adjust_console_text): New functions.
805         (hacked_fprintf, hacked_vfprintf, hacked_fputs, hacked_fputc,
806         hacked_putc): Don't call draw_console.
807         * ser-mac.c (mac_open): Add an error message for invalid ports.
808         (first_mac_write): New global.
809         (mac_write): Use first_mac_write to sleep on first several writes.
810
811         * mpw-make.in (INCLUDE_CFLAGS): Add readline source dir.
812         (READLINE_CFLAGS, READLINE_SRC, READLINE_DIR): Uncomment.
813         (TSOBS): Don't compile inflow.c.
814         (all, install): Add MacGDB.
815         * main.c (main): Do Mac-specific init and command loop if a
816         standalone app, skip full option help message if compiling
817         with MPW C.
818         (gdb_readline): If MPW, add a newline after the (gdb) prompt.
819         * utils.c (_initialize_utils): If MPW, don't try to use termcap to
820         compute the window size.
821         * config/m68k/xm-mpw.h (printf, fprintf, fputs, fputc, putc,
822         fflush): Define as macros that expand into hacked_... versions.
823         (StandAlone, mac_app): Declare.
824         * macgdb.r (SIZE): Set the default partition to 4000K.
825         * mac-xdep.c (readline.h, history.h): Include.
826         (terminal.h): Don't include.
827         (mac_app): Define.
828         (gdb_has_a_terminal): Define Mac-specific version.
829         (do_keyboard_command): Simplify search for command string.
830         (readline): Define as gdb_readline.
831         Add other history/readline stubs to make main gdb link.
832         (hacked_fprintf, hacked_printf, hacked_vfprintf, hacked_fputs,
833         hacked_fputc, hacked_fflush): New functions, intercept output to
834         stdout and stderr, send to console window.
835
836         * mpw-make.in (MacGDB): New target, standalone Mac-hosted gdb.
837         (XDEPFILES): Define.
838         (main.c.o): Compile with gC instead of C.
839         * mac-defs.h: New file, menu etc definitions shared between
840         C and Rez files.
841         * macgdb.r: New file, Rez (resource compiler) resource
842         definitions.
843         * mac-xdep.c: New file, Mac host interface code.
844         * config/m68k/xm-mpw.h (PATHNAME_SEPARATOR): Rename to
845         DIRNAME_SEPARATOR.
846         (PATHNAME_SEPARATOR_STRING): Remove.
847         (SIGQUIT, SIGHUP): Define.
848         (fileno, R_OK): Define.
849
850         * mpw-config.in: New file, MPW configuration fragment.
851         * mpw-make.in: New file, MPW makefile fragment.
852         * config/m68k/xm-mpw.h: New file, MPW host definitions.
853         * ser-mac.c: New file, Mac serial interface.
854
855 Mon Apr 10 16:47:57 1995  Kung Hsu  <kung@mexican.cygnus.com>
856
857         * valprint.c (print_longest): Fix a syntax error in #ifdef 
858         PRINTF_HAS_LONG_LONG.
859
860         * config/mips/xm-irix5.h: turn on CC_HAS_LONG_LONG and 
861         PRINTF_HAS_LONG_LONG.
862         * config/mips/tm-irix5.h: turn on FORCE_LONG_LONG.
863
864 Sat Apr  8 02:47:45 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
865
866         * mdebugread.c (parse_symbol):  Use new variable 
867         nodebug_var_symbol_type as type of variables which don't have any
868         ecoff debug info associated with them.
869         (parse_symbol, parse_procedure):  Use heuristics to determine if
870         functions were compiled without debugging info and change their
871         type to nodebug_function_symbol_type.
872         (_initialize_mdebugread):  Initialize nodebug_*_symbol_type.
873
874         * source.c (line_info):  Clear sal.pc for `info line' without
875         arguments.
876
877 Fri Apr  7 17:43:01 1995  Stu Grossman  (grossman@andros.cygnus.com)
878
879         * monitor.c:  make_xmodem_packet and print_xmodem_packet go away.
880         send_xmodem_packet shows up to do the obvious.  Lots of fixes to
881         xmodem downloads including resetting of block number at start of
882         new transfers, fix for buffer overrun problem, addition of CRC
883         generation code.
884         * (monitor_open):  loadtype_str and loadproto_str now default to
885         first entry in monitor_ops->loadtypes.
886         * (monitor_wait):  Lengthen register dump buf, because of verbose
887         Winbond monitor.
888         * (monitor_fetch_register):  Report unimplemented registers as 0.
889         * (monitor_read_memory):  Only do 16 byte aligned transfers
890         because of formatting weirdness with the Winbond monitor.  Also,
891         ignore non-hex, non-whitespace formatting between bytes (same
892         monitor).
893         * (monitor_load):  Clean up logic.
894         * (monitor_load_srec):  Re-do xmodem support.  Move lots of it
895         into send_xmodem_packet.
896         * (getacknak):  Get rid of polls and timeouts.  Handle CRC
897         requests from receiver.
898         * (monitor_make_srec):  Efficiency improvements.  Don't call
899         sprintf to output two digit hex numbers.
900         * (crcinit, docrc):  New, CRC-16 support routines.
901         * (send_xmodem_packet):  New routine to generate either CRC-16 or
902         checksummed xmodem packets.
903
904         * remote-est.c (est_loadtypes), rom68k-rom.c (rom68k_loadtypes):
905         Reduce tables down to only the load types supported by each
906         monitor.
907
908         * w89k-rom.c  (w89k_supply_register):  Parses output of Winbond
909         register dumps.
910         * (w89k_loadtypes, w89k_loadprotos):  Reduce to just srec/xmodem.
911         * (w89k_cmds):  Add clear all breakpoints, memory fill, and dump
912         registers commands.
913
914         * config/pa/tm-hppa.h:  Define lots register offsets needed by
915         w89k-rom.c.
916
917
918 Thu Apr  6 17:00:46 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
919
920         * Makefile.in (X11_INCLUDES): Define as empty.
921         (X11_CFLAGS): Define as including $(X11_INCLUDES).
922         (X11_LIB_SWITCHES): Define as empty.
923         (X11_LIBS): Define as -lX11.
924
925 start-sanitize-gdbtk
926         * configure.in (enable_gdbtk): If gdbtk, support the --x-includes
927         and --x-libraries switches, setting the X11_INCLUDES and
928         X11_LIB_SWITCHES respectively.  Instead of using a hardcoded -lX11
929         in ENABLE_CLIBS, use the X11_LIB_SWITCHES and X11_LIBS variables.
930
931         * gdbtk.c (gdbtk_init): If SIOCSPGRP is not available, don't use
932         it.  This means that the stop button doesn't work, but is better
933         than nothing.
934 end-sanitize-gdbtk
935
936 Wed Apr  5 19:57:38 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
937
938         * mips-tdep.c (mips_print_register): Remove unused variable
939         our_type and call to init_type.  Fixes memory leak.  Reindent function.
940
941         * mips-tdep.c (mips_print_register), findvar.c
942         (write_register_bytes): Make buffer char[] instead of unsigned
943         char[].
944
945 Mon Apr  3 19:28:14 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
946
947         * top.c, utils.c, main.c, defs.h: Replace error_pre_print with two
948         variables: error_pre_print (for RETURN_ERROR) and quit_pre_print
949         (for RETURN_QUIT).  Fixes a bug whereby typing ^C (e.g. in "maint
950         print sym") could output extraneous stuff.
951         * objfiles.c: Don't declare error_pre_print; defs.h does it.
952
953 Mon Apr  3 13:48:28 1995  Stu Grossman  (grossman@andros.cygnus.com)
954
955         * monitor.h:  Add MO_GETMEM_NEEDS_RANGE flag.
956         * monitor.c (monitor_read_memory):  Use previously mentioned flag
957         to send proper format memory examine commands to the w89k monitor.
958         Also, try to handle bizarre format of memory dump...
959
960         * op50-rom.c w89k-rom.c:  Update to new monitor.[ch] conventions.
961
962 Sat Apr  1 03:22:20 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
963
964         * dbxread.c (process_one_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]:
965         Handle relocated symbol address.
966         * partial-stab.h, case N_SO, SOFUN_ADDRESS_MAYBE_MISSING:
967         Do not relocate a zero address.
968
969 Thu Mar 30 19:46:36 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
970
971         * config/a29k/tm-a29k.h: Nuke obsolete define CONTROL_END_ADDR; it
972         is nowhere used.
973
974         * stabsread.c (read_range_type): Remove FIXME comment about
975         type-id (I presume this meant a number followed by = followed by a
976         type) versus type number; Per fixed it.
977
978 Wed Mar 29 09:56:04 1995  Jason Molenda  (crash@phydeaux.cygnus.com)
979
980         * configure.in: sparc-*-sunos5* is same as sparc-*-solaris2*.
981
982 Wed Mar 29 18:30:03 1995  Stan Shebs  <shebs@andros.cygnus.com>
983
984         * remote-e7000.c (why_stop): Add new kinds of strings to expect
985         from the emulator.
986         (e7000_wait): Add interpretations for more stop reasons,
987         including warnings for write protect and cycle address errors.
988
989 Wed Mar 29 17:09:29 1995  Stu Grossman  (grossman@cygnus.com)
990
991 start-sanitize-gdbtk
992         * Makefile.in (gdbtk.o):  Use X11_CFLAGS to provide alternate
993         locations (per-host) for X11 include files.
994         * config/pa/hppahpux.mh (XM_CLIBS):  Add -L/usr/lib/X11R5 to force
995         the use of R5 libs.  (X11_CFLAGS):  Add this to indicate the locs
996         of the R5 include files.
997 end-sanitize-gdbtk
998         * monitor.c monitor.h remote-est.c rom68k-rom.c:  Add start of
999         support for interrupting target.
1000         * monitor.c (monitor_open):  Send stop command before doing
1001         anything else.
1002         * (monitor_load_srec):  Fix record size calculation to prevent end
1003         of segment from getting trashed.
1004         * rom68k-rom.c:  Update to latest version of struct monitor_ops.
1005         * config/sparc/tm-sparc.h (FIX_CALL_DUMMY):  Fix byte-order
1006         problems.  Makes DOS hosted function calling work.
1007         * sparclite/crt0.s:  Define _start to make COFF happy.
1008
1009 Wed Mar 29 09:11:51 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1010
1011         * defs.h (atof): Don't provide an external declaration if atof is
1012         a macro.
1013
1014 Wed Mar 29 00:01:07 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1015
1016         * rs6000-tdep.c (skip_prologue):  Skip saving of LR and CR in
1017         the stack frame, fix typos in `st rx,NUM(r1)' and `stu r1,NUM(r1)'
1018         tests.
1019
1020 Tue Mar 28 17:04:04 1995  Per Bothner  <bothner@kalessin.cygnus.com>
1021
1022         * gdbtypes.c (create_range_type):  If indextype has TYPE_FLAG_STUB
1023         set, set TYPE_FLAG_TARGET_STUB.
1024         (check_stub_type):  Recalculate TYPE_LENGTH for range type.
1025         * stabsread.c (read_range_type):  If index type number is followed
1026         by '=', back up, call read_type. and assume we have a true range.
1027         * gdbtypes.h (TYPE_FLAG_TARGET_STUB):  Update comment.
1028
1029 Mon Mar 27 22:51:54 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1030
1031         * alpha-nat.c, irix4-nat.c, irix5-nat.c, mipsv4-nat.c,
1032         sparc-tdep.c (supply_gregset, supply_fpregset):  Fill inaccessible
1033         registers with zero to handle recent read_register_bytes change.
1034         * irix4-nat.c, irix5-nat.c, mipsv4-nat.c (supply_gregset,
1035         fill_gregset):  Fix handling of CAUSE_REGNUM.
1036         * mips-nat.c (store_inferior_registers):  Handle unwritable
1037         registers when storing a single register.
1038         * config/mips/tm-irix3.h (CAUSE_REGNUM, BADVADDR_REGNUM):
1039         Fix definitions.
1040
1041         * mdebugread.c (parse_symbol, psymtab_to_symtab_1):  Clear
1042         allocated mips_extra_func_info, if the debug info is corrupt,
1043         the PDR to fill it in might be missing.
1044
1045 Mon Mar 27 14:43:00 1995  Kung Hsu  <kung@mexican.cygnus.com>
1046
1047         * vx-share/regPacket.h: a new file interfacing with vxworks.
1048
1049 Sun Mar 26 13:22:47 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
1050
1051         * breakpoint.c (bpstat_do_actions): Once we've executed the
1052         commands, set bs->commands to NULL.
1053
1054 Sat Mar 25 01:16:10 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1055
1056         * buildsym.c (patch_subfile_name):  Update last_source_file
1057         with the real source file name.
1058         * dbxread.c (end_psymtab):  Handle static functions in the
1059         SOFUN_ADDRESS_MAYBE_MISSING case by passing pst->filename
1060         to lookup_minimal_symbol.
1061         (process_one_symbol):  Ignore extra outermost context from
1062         SunPRO cc and acc.
1063         * stabsread.c (define_symbol):  Do not complain for SunPRO
1064         static variable encoding if STATIC_TRANSFORM_NAME is defined.
1065         * sparc-tdep.c, config/sparc/tm-sun4sol2.h
1066         (sunpro_static_transform_name):  Renamed from
1067         solaris_static_transform_name.
1068         * config/sparc/tm-sun4os4.h (STATIC_TRANSFORM_NAME):
1069         Define to sunpro_static_transform_name for acc 3.0 compiled
1070         executables.
1071         * procfs.c, config/alpha/nm-osf2.h (PROCFS_DONT_TRACE_FAULTS):
1072         Renamed from PROCFS_DONT_TRACE_IFAULT, don't trace any faults
1073         if defined.
1074         * procfs.c (info_proc_siginfo):  Cast sip->si_addr to
1075         `unsigned long' and use `lx' format for printing it.
1076
1077 Fri Mar 24 15:45:42 1995  Stu Grossman  (grossman@cygnus.com)
1078
1079         * configure.in:  Move test for m68*-est-* before m68*-*-coff*.
1080         * findvar.c:  Move default def of CANNOT_STORE_REGISTER closer to
1081         the beginning of the code.
1082         * (write_register_gen):  New routine.  Analogous to
1083         read_register_gen.
1084         * (write_register_bytes):  Another rewrite!  Make it smarter about
1085         not updating regs with the same value.
1086         * monitor.c (printf_monitor readchar):  Use stderr instead of
1087         stdout to output debug info.  Also cleanup readchar a little.
1088         * (expect):  Make sure that excessive responses are null
1089         terminated.
1090         * (monitor_open):  Check for magic number in monitor_ops struct.
1091         Allow multiple commands as init strings.  Also, clear all
1092         breakpoints.
1093         * (monitor_resume monitor_wait):  Send a command to dump all the
1094         regs for those targets which don't do so when waking up after a
1095         continue command.
1096         * (monitor_wait):  Handle excessive response output better.
1097         * (monitor_write_memory):  Use block fill, word, and long word
1098         commands (if they exist) to write memory more efficiently.
1099         * General cleanups to use flag bits instead of individual flag
1100         words in monitor_ops struct.
1101         * (monitor_command):  Return output from command.
1102         * (monitor_load_srec):  Allocate buffer only once.  Use alloca.
1103         Wait for load response string instead of using a timeout to start
1104         sending S-records.  Fix bug where value of srec_frame shrinks.  If
1105         hashmark is set, print `-' for retransmissions.  General cleanups.
1106         * (monitor_make_srec):  Get rid of S-record default type kludge.
1107         * monitor.h:  Use seperate struct for memory and register
1108         read/write commands.  Memory commands can come in byte, word,
1109         long, and longlong forms.
1110         * (monitor_ops):  Change lots of fields.  Generalize some stuff.
1111         Put all flags into flags word.  Allow init to be a list of commands.
1112         Add command for clearing all breakpoints, block fill, dumping all
1113         registers.
1114         * remote-est.c:  Rewrite to use new monitor conventions.
1115         * config/m68k/est.mt (TDEPFILES):  Add monitor.o.
1116         * config/m68k/tm-est.h:  Set NUM_REGS to 18.
1117         * testsuite/gdb.base/break.exp:  Lots of cleanups.  Use gdb_test
1118         more thoroughly.
1119
1120 Thu Mar 23 23:20:00 1995  Jeff Law  (law@snake.cs.utah.edu)
1121
1122         * somsolib.c (som_solib_add): Handle case where a shared library
1123         referenced by a core file has sections without the SEC_ALLOC bit
1124         set (eg stabs sections).
1125
1126 Thu Mar 23 15:07:08 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
1127
1128         * breakpoint.c (bpstat_do_actions): For each element in the bpstat
1129         chain, do all the commands regardless of whether they run the
1130         inferior.
1131
1132 Wed Mar 22 19:17:06 1995  Doug Evans  <dje@cygnus.com>
1133
1134         * mem-break.c (LITTLE_BREAKPOINT, BIG_BREAKPOINT): Define as
1135         BREAKPOINT if mono-endian.
1136         (break_insn): Deleted.
1137         (big_break_insn, little_break_insn): Define.
1138         (memory_insert_breakpoint): Handle bi-endian cpus.
1139         (BREAKPOINT_LEN): Define.
1140         (memory_remove_breakpoint): Use it.
1141         (memory_breakpoint_size): Likewise.
1142
1143 Tue Mar 21 17:03:17 1995  Kung Hsu  <kung@mexican.cygnus.com>
1144
1145         * sparc-stub.c: add nop after 'bg good_wim'.
1146         * sparcl-stub.c: ditto.
1147
1148 Tue Mar 21 13:34:12 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
1149
1150         * infrun.c (handle_command): Don't print TARGET_SIGNAL_0,
1151         TARGET_SIGNAL_UNKNOWN, or TARGET_SIGNAL_DEFAULT.
1152
1153 Mon Mar 20 10:09:59 1995  Jeff Law  (law@snake.cs.utah.edu)
1154
1155         * hppab-nat.c (store_inferior_registers): Sync with HPUX version.
1156
1157 Mon Mar 20 07:34:48 1995  Stu Grossman  (grossman@cygnus.com)
1158
1159         * hppah-nat.c (store_inferior_registers):  Move check for
1160         CANNOT_STORE_REGISTER to a better place.  Fixes ptrace I/O errors
1161         found by test suite during function calls, which attempts to write
1162         unwritable registers.
1163
1164 Sat Mar 18 02:02:24 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1165
1166         * mdebugread.c (parse_symbol):  If finishing a function without
1167         known parameter type info, set that from parameter symbols.
1168         Remove commented-out add_param_to_type support.
1169
1170 Thu Mar 16 16:38:03 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
1171
1172         * xcoffread.c (process_linenos): Make sure filename we pass to
1173         start_subfile will cause deduce_language_from_filename to return
1174         the correct thing.  Reindent function to GNU standards.
1175
1176 Thu Mar 16 15:54:00 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1177
1178         * nlm/gdbserve.c (handle_exception): #if out call to StopBell,
1179           as it is not available on NetWare 3 or PIN.
1180         * nlm/ppc.c (StopBell): Removed.
1181
1182 Thu Mar 16 12:14:41 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
1183
1184         * xcoffread.c (read_xcoff_symtab): When creating a dummy parameter
1185         inferred from the traceback tags, give its type the name
1186         "<non-float parameter>".
1187
1188         * stabsread.c (rs6000_builtin_type): Recognize types -31 to -34.
1189
1190 Wed Mar 15 15:09:29 1995  Stu Grossman  (grossman@cygnus.com)
1191
1192         * findvar.c (read_register_bytes write_register_bytes):  Make
1193         these routines much smarter about updating registers from the
1194         target, only doing so when absolutely necessary.  This really
1195         speeds up register modification on some remote targets.
1196
1197         * monitor.c:  More cleanups.  Get rid of monitor_load_ascii_srec.
1198         BFD makes this unnecessary.  Lots of debugging speedups.
1199         * (expect):  NULL terminate return string.
1200         * (monitor_open monitor_supply_register parse_register_dump
1201         monitor_wait monitor_fetch_register):  Switch to using GNU regexp
1202         library to parse multi-register displays.
1203         * (monitor_read_memory): Read multiple bytes (up to 16) at once.
1204         * (monitor_create_inferior):  Call clear_proceed_status to make run
1205         command notice first breakpoint.
1206         * (monitor_load):  Clean up.  Reset inferior_pid, set pc to start
1207         address and reset symbol table stuff to make loads put things into
1208         a fresh state.
1209         * (monitor_load_srec):  Lower sleep time to 1 second.
1210
1211         * monitor.h (struct monitor_ops):  Add register_pattern and
1212         supply_register to monitor_ops.
1213
1214         * rom68k-rom.c:  Add new support for handling register dumps.
1215         * config/m68k/tm-m68k.h:  Define D0_REGNUM and A0_REGNUM for register
1216         dump handling.
1217
1218 Wed Mar 15 15:18:27 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
1219
1220         * utils.c, defs.h (putchar_unfiltered, fputc_unfiltered): Make
1221         argument be an int, not a char.  Using a prototype followed by an
1222         old-style function definition in a case where an argument is
1223         widened is a GCC-ism not supported by the native AIX compiler.
1224
1225 Wed Mar 15 12:22:35 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1226
1227         * nlmstub.def: Removed, this was moved to nlm/gdbserve.def 
1228           long ago.
1229
1230         * configure.in (alpha-*-netware*): Removed configuration.
1231         * config/alpha/{alpha-nw.mt, gdbserve.mt, tm-alphanw.h}: Removed.
1232         * nlm/{README-ALPHA-NETWARE, aio.h, alpha-io.S, alpha-regdef.h,
1233           alpha.c, alpha.h, altdebug.h}: Removed.
1234
1235         * nlm/gdbserve.c (main): Add support for processing BOARD=
1236           argument, deprecate NODE=.
1237
1238 Wed Mar 15 10:58:26 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
1239
1240         * c-exp.y (yylex): Make an empty character constant an error.
1241
1242 Tue Mar 14 15:00:54 1995  Per Bothner  <bothner@kalessin.cygnus.com>
1243
1244         * valops.c (value_arg_coerce):  Do possible value_coerce_array
1245         before determining type argument to value_cast.
1246
1247 Tue Mar 14 10:41:41 1995  Kung Hsu  <kung@mexican.cygnus.com>
1248
1249         * remote-es.c: Replace ignore with 0.
1250
1251 Tue Mar 14 05:52:36 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
1252
1253         * valops.c (value_repeat), eval.c (evaluate_subexp_standard):
1254         If VALUE_REPEATED is already set, just error out.
1255
1256         * valops.c (value_cast, value_slice), parse.c (follow_types): Add
1257         FIXME-type-allocation comments.
1258
1259         * gdbtypes.h (struct type): Fix comment about what units the
1260         TYPE_LENGTH is in.
1261
1262 Mon Mar 13 18:27:25 1995  Stan Shebs  <shebs@andros.cygnus.com>
1263
1264         * ch-valprint.c (annotate.h): Include.
1265         * eval.c (evaluate_subexp_standard): Remove unused variable.
1266         (calc_f77_array_dims): Add parens to expression.
1267         * f-exp.y (yylex): Add parens to expression, remove unused label.
1268         * f-lang.h (calc_f77_array_dims): Declare.
1269         * f-valprint.c (f_val_print): Remove unused variables.
1270
1271 Mon Mar 13 15:25:47 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
1272
1273         * alpha-tdep.c (find_proc_desc): If pdr.framereg field is -1, don't
1274         use the PDR, just examine prologues instead.
1275
1276 start-sanitize-arc
1277 Fri Mar 10 16:13:18 1995  Kung Hsu  <kung@mexican.cygnus.com>
1278
1279         * config/tm-arc.h: Change arc register names.
1280 end-sanitize-arc
1281
1282 Fri Mar 10 02:49:40 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1283
1284         Fix problems with infinite recursion when printing a class
1285         that contains a static instance of the class.
1286         * cp-valprint.c (dont_print_vb_obstack):  Renamed from
1287         dont_print_obstack, made static.
1288         (dont_print_statmem_obstack):  New obstack, controls printing
1289         of static member classes.
1290         (_initialize_cp_valprint):  Initialize it.
1291         (cp_print_static_field):  New function, handles printing of
1292         static members.
1293         (cp_print_value_fields):  New parameter dont_print_statmem to
1294         handle recursive printing of static member classes, use
1295         cp_print_static_field to handle printing of static members.
1296         * c-valprint.c (cp_print_value_fields):  Update prototype and
1297         call to include additional dont_print_statmem parameter.
1298         * c-valprint.c, f-valprint.c (dont_print_obstack):  Remove unused
1299         extern declaration.
1300
1301         * alpha-tdep.c, findvar.c, infptrace.c:  Include <string.h>.
1302
1303         * config/alpha/tm-alpha.h (FRAME_FIND_SAVED_REGS):  Call
1304         alpha_find_saved_regs if fi->saved_regs is still NULL.
1305
1306         * elfread.c (elf_symtab_read):  Ensure that the filename field
1307         of a minsym is nonempty. Ignore solib trampoline symbols from
1308         the main symbol table, they might have a bogus value.
1309
1310         * procfs.c (set_proc_siginfo), config/alpha/alpha-osf2.mh:
1311         Fix typos in comments.
1312
1313 Thu Mar  9 17:19:47 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
1314
1315         * mdebugread.c (parse_symbol, psymtab_to_symtab_1): Initialize
1316         pdr.framereg field of MIPS_EFI_SYMBOL_NAME symbol to -1.  That way
1317         we know whether the PDR ever got set.
1318         * mips-tdep.c (find_proc_desc): If pdr.framereg field is -1, don't
1319         use the PDR, just examine prologues instead.
1320
1321 Wed Mar  8 23:35:10 1995  Jeff Law  (law@snake.cs.utah.edu)
1322
1323         * somsolib.c (som_solib_section_offsets): Get offset of text
1324         section right. 
1325
1326 Wed Mar  8 16:12:21 1995  Stu Grossman  (grossman@cygnus.com)
1327
1328 start-sanitize-gdbtk
1329         * gdbtk.c (gdb_get_breakpoint_info):  Return error if breakpoint
1330         type is not bp_breakpoint.
1331 end-sanitize-gdbtk
1332
1333         * source.c (forward_search_command reverse_search_command):  Set
1334         convenience variable $_ to be the line # of the match.
1335         * symtab.c (decode_line_1):  Allow convenience variables to be
1336         used in line specs (for breakpoints and such).
1337
1338 Wed Mar  8 12:51:00 1995  Stan Shebs  <shebs@andros.cygnus.com>
1339
1340         * Makefile.in (VERSION): Bump to 4.14.1.
1341         * NEWS, README: Update for 4.14.
1342         * i386v-nat.c (i386_insert_aligned_watchpoint): Fix declaration.
1343         (i386_insert_nonaligned_watchpoint): Call aligned instead of
1344         generic watchpoint insertion.
1345
1346 Tue Mar  7 19:26:10 1995  Per Bothner  <bothner@kalessin.cygnus.com>
1347
1348         * valops.c (value_slice):  Do COERCE_VARYING_ARRAY.
1349
1350 Tue Mar  7 00:23:47 1995  Stu Grossman  (grossman@cygnus.com)
1351
1352         * monitor.c, array-rom.c, monitor.h, rom68k-rom.c:  Move target_ops
1353         into monitor.c.
1354         * monitor.c (monitor_create_inferior):  Allow run command to start
1355         program.
1356
1357         * monitor.c (monitor_load):  Set PC to start address when done
1358         loading.
1359
1360         * array-rom.c, monitor.h, rom68k-rom.c:  Clean up target_ops.
1361         Remove ref to monitor_create_inferior.
1362
1363         * monitor.c:  More general cleanups.  Add prototypes, remove
1364         unused routines.  Fix bug with wrong number of args to error().
1365
1366         * main.c (main):  Don't start up GUI when running under gdb mode
1367         in emacs.
1368
1369         * Makefile.in:  Add rules for monitor.o and rom68k-rom.o to make
1370         Sun make (with VPATH) work...
1371
1372         * monitor.c, monitor.h, rom68k-rom.c:  Serious cleanup to make IDP
1373         (rom68k) target work right.
1374         * array-rom.c, op50-rom.c, w89k-rom.c:  Partial updates to new
1375         monitor.c interface.  More work needs to be done here.
1376         * config/m68k/tm-monitor.h:  Change DECR_PC_AFTER_BREAK to 0 to
1377         match the IDP monitor.  Also, set NUM_REGS to 18 cuz there's no
1378         floating-point for this card.
1379
1380         * serial.h, ser-go32.c, ser-go32-para.c, ser-mac.c, ser-tcp.c,
1381         ser-unix.c:  Add SERIAL_SETSTOPBITS to set the number of stopbits
1382         (needed for IDP board?!?!?).
1383
1384         * defs.h, utils.c, remote-hms.c, remote-pa.c, remote.c:  Fix defs
1385         and usage of fputc_unfiltered and putchar_unfiltered.  Eliminate
1386         putc_unfiltered (it's superfluous).
1387
1388         * command.h, command.c, top.c:  Add var_enum command type.  It's
1389         like var_string but allows only only one of the specified strings.
1390
1391 Mon Mar  6 15:03:59 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
1392
1393         * valops.c (value_cast): Don't use backslash newline--pre-ANSI
1394         compilers (such as SunOS4 /bin/cc) don't generally support it
1395         except in some contexts.
1396
1397 Fri Mar  3 17:42:48 1995  Per Bothner  <bothner@kalessin.cygnus.com>
1398
1399         * valops.c (value_cast):  Check for cast to array type *before*
1400         we coerce array to pointer (in case arg2 is already array).
1401
1402         * valops.c (call_function_by_hand):  Set using_gcc to 2 if using
1403         gcc2.  Needed for REG_STRUCT_HAS_ADDR to work on sparc.
1404         Also check REG_STRUCT_HAS_ADDR for union, array and string types.
1405
1406         * valops.c (call_function_by_hand):  Re-arrange code for pushing
1407         paramaters on the stack so we can do better STACK_ALIGN.
1408
1409         * valops.c (call_function_by_hand):  Call error if the number
1410         of arguments is fewer than parameter types in function type.
1411
1412 Fri Mar  3 17:13:05 1995  Doug Evans  <dje@canuck.cygnus.com>
1413
1414         * sparc-tdep.c (sparc_extract_struct_value_address): Move
1415         sparc64 support to here.
1416         (sparc64_extract_struct_value_address): Deleted.
1417         (dump_ccreg): Add a prototype so long long arg -> int.
1418         * sparc/tm-sp64.h (USE_STRUCT_CONVENTION): Define.
1419         (EXTRACT_STRUCT_VALUE_ADDRESS): Delete.
1420
1421 Fri Mar  3 15:12:12 1995  Jeff Law  (law@snake.cs.utah.edu)
1422
1423         * hpread.c (hpread_record_lines): New argument "offset".  All
1424         callers changed.  Use it to handle dynamic address relocation.
1425         (hpread_build_psymtabs): Adjust texthigh as we read each function
1426         debug symbol.  Fix computation of texthigh.
1427         (hpread_read_subrange_type): Work around macro bugs in HP's
1428         compilers.
1429         (hpread_process_one_debug_symbol): Correctly map source lines.
1430
1431         * somread.c (check_strange_names): Filter names emitted by the HP
1432         compiler when generating PIC code.
1433
1434         * valops.c (value_struct_elt_for_reference): Work around macro
1435         bugs in HP's compilers.
1436         * c-exp.y (block): Likewise.
1437
1438 Fri Mar  3 12:27:28 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
1439
1440         * rs6000-tdep.c (push_dummy_frame): Fix order of arguments to
1441         store_address.
1442
1443         * utils.c [_AIX]: Include stddef.h instead of #defining size_t.
1444
1445 Fri Mar  3 12:33:24 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1446
1447         * rs6000-tdep.c (skip_prologue): Skip multiple stores of the saved
1448         registers that GCC emits on the PowerPC by default in addition to
1449         the store multiple instruction used on the Power series.
1450
1451 Fri Mar  3 00:54:58 1995  Doug Evans  <dje@canuck.cygnus.com>
1452
1453         * sparc-tdep.c (decode_asi): New function.
1454         (sparc_print_register_hook): Pretty print more v9 registers.
1455         * sparc/tm-sp64.h (REGISTER_NAMES): Fix some typos.
1456
1457 Thu Mar  2 22:20:22 1995  Doug Evans  <dje@canuck.cygnus.com>
1458
1459         * dwarfread.c (struct dieinfo): Use CORE_ADDR for at_{low,high}_pc.
1460         (target_to_host): Change result type to CORE_ADDR.
1461
1462 Thu Mar  2 15:13:04 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
1463
1464         * rs6000-tdep.c: Fix byte-swapping sins.
1465
1466 Thu Mar  2 16:48:45 1995  Michael Meissner  <meissner@cygnus.com>
1467
1468         * rs6000-tdep.c (branch_dest): Minor code cleanup, don't share
1469         code between branch unconditional and branch conditional cases.
1470
1471 Wed Mar  1 09:41:26 1995  Doug Evans  <dje@canuck.cygnus.com>
1472
1473         Various changes for sparc64.
1474         * sparc-tdep.c (NUM_SPARC_FPREGS): Define.
1475         (SPARC_INTREG_SIZE): Define.
1476         (*): Use SPARC_INTREG_SIZE instead of REGISTER_RAW_SIZE (intreg)
1477         where appropriate.
1478         (enum branch_type): New value `done_retry'.
1479         (isbranch): Renamed from isannulled.  All callers changed.
1480         Support new sparc64 branch insns.
1481         (single_step): Handle done_retry.
1482         (sparc_extract_struct_value_address): Don't assume 4 byte regs.
1483         (get_saved_register): Likewise.
1484         (sparc_push_dummy_frame): Likewise.
1485         (sparc_frame_find_saved_regs): Likewise.
1486         (sparc_pop_frame): Likewise.  Don't refer to FPS_REGNUM, CPS_REGNUM,
1487         or PS_REGNUM if not sparc64.  sparc64 has 64 fp regs.
1488         (sparc64_extract_struct_value_address): New function.
1489         (dump_ccreg, sparc_print_register_hook): Likewise.
1490         * sp64-tdep.c: Deleted.
1491         * sparc/tm-sp64.h (GDB_TARGET_IS_SPARC64): Define.
1492         (NUM_REGS): Reduce by 2, cle/tle are in the pstate reg.
1493         (CC_HAS_LONG_LONG): Define.
1494         (REGISTER_NAMES): Delete cle/tle and reorganize.
1495         (PS_REGNUM, FPS_REGNUM, CPS_REGNUM): Delete, they're ifdef'd out of
1496         sparc-tdep.c now.
1497         (REGISTER_BYTES): Update.
1498         (REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Delete.
1499         (EXTRACT_RETURN_VALUE): Delete.  Use definition in tm-sparc.h.
1500         (NO_SINGLE_STEP): Likewise.
1501         * sparc/tm-sparc.h (EXTRACT_VALUE_RETURN): Don't assume 4 byte regs.
1502         * sparc/sp64.mt: Move simulator support ...
1503         * sparc/sp64sim.mt: ... to here.
1504
1505 Wed Mar  1 13:14:42 1995  Kung Hsu  <kung@mexican.cygnus.com>
1506
1507         * remote-vx960.c: new file for target specific register packaging.
1508         * remote-vx68.c: ditto.
1509         * config/i960/vxworks960.mt: add remote-vx960.o.
1510         * config/m68k/vxworks68.mt: add remote-vx68.o.
1511
1512 Wed Mar  1 13:42:49 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1513
1514         * remote.c (remote_wait): Make calls to strtol be type correct by
1515         passing the address of a char * pointer instead of an unsigned
1516         char *.
1517
1518         * rs6000-tdep.c (push_dummy_frame): Cast sp to char * when calling
1519         write_memory to make things type correct.
1520
1521 Wed Mar  1 12:17:31 1995  Michael Meissner  <meissner@cygnus.com>
1522
1523         * ch-exp.y, c-exp.y, f-exp.y, m2-exp.y (yy defines): Support the
1524         standard Linux yacc by adding more names to be redefined with a
1525         prefix.
1526
1527 Tue Feb 28 22:55:47 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
1528
1529         * hppa-tdep.c (pa_print_registers), monitor.c: Use
1530         extract_unsigned_integer and friends, not SWAP_TARGET_AND_HOST.
1531         * defs.h, findvar.c: Move SWAP_TARGET_AND_HOST back to findvar.c.
1532         Rename it to SWAP_FLOATING to make it clear it is no longer for
1533         integers.
1534
1535 Tue Feb 28 14:38:39 1995  Kung Hsu  <kung@mexican.cygnus.com>
1536
1537         * defs.h (SWAP_TARGET_AND_HOST): check endianess at runtime not
1538         compile time.
1539
1540 start-sanitize-arc
1541         * arc-tdep.c (_initialize_arc_tdep): set tm_print_insn according to 
1542         processor.
1543         * remote-arc.c (arc_wait): when a processor stops, stop other two
1544         processors too.
1545         * remote-arc.c (switch_command): switch tm_print_insn.
1546 end-sanitize-arc
1547
1548         * vx-share/ptrace.h: merge in WRS new ptrace requests.
1549
1550         * defs.h: fix a syntax error.
1551
1552         * a29k-tdep.c (get_longjmp_target): add this function, from WRS.
1553         * remote-vx.c: move read_register and write_register out to 
1554         target specific files.
1555         * remote-vx29k.c (get_fp_contnets): add this function, from WRS.
1556
1557         * defs.h: define SWAP_TARGET_AND_HOST macro.
1558         * findvar.c, monitor.c, hppa-tdep.c: remove definition of
1559         SWAP_TARGET_AND_HOST.
1560
1561 Tue Feb 28 08:31:40 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
1562
1563         * alpha-tdep.c (find_proc_desc): Only attempt to set
1564         PROC_LOCALOFF (found_heuristic) if found_heuristic is non-NULL.
1565
1566 Mon Feb 27 11:56:32 1995  Stan Shebs  <shebs@andros.cygnus.com>
1567
1568         * monitor.c: General gcc -Wall lint cleanup and reformat.
1569         (monitor_command): If no args, send an empty command.
1570
1571 Thu Feb 23 21:07:25 1995  Stu Grossman  (grossman@cygnus.com)
1572
1573         * monitor.c (monitor_load_ascii_srec):  Add a one second sleep
1574         after send LOAD_CMD to prevent loss of first S-record.
1575
1576 Tue Feb 21 20:48:42 1995  Per Bothner  <bothner@kalessin.cygnus.com>
1577
1578         * valops.c (call_function_by_hand):  Set using_gcc to 2 if gcc-2.
1579         Call error if too few arguments.
1580         If REG_STRUCT_HAS_ADDR (structs passed by invisible reference),
1581         copy and convert to reference *before* we calculate alignment.
1582         Also, make sure structs allocated for return values and invisible
1583         reference don't violate STACK_ALIGN.
1584
1585 Tue Feb 21 23:29:59 1995  Per Bothner  <bothner@rtl.cygnus.com>
1586
1587         * ch-exp.y (expression_conversion):  Recognize 'ARRAY () TYPE (EXPR)'
1588         (same as C's '(TYPE[])EXPR')
1589
1590 Tue Feb 21 11:47:26 1995  Stan Shebs  <shebs@andros.cygnus.com>
1591
1592         * top.c (print_gdb_version): Update the year.
1593
1594 Sun Feb 19 14:31:57 1995  Jim Kingdon  <kingdon@rtl.cygnus.com>
1595
1596         * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Look for newlib in
1597         `..' not in `../..'.
1598
1599 Sun Feb 19 11:05:28 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1600
1601         * procfs.c (unconditionally_kill_inferior):  Don't issue a PIOCKILL
1602         in addition to a PIOCSSIG to kill the inferior.
1603
1604 Thu Feb 16 15:06:12 1995  Per Bothner  <bothner@kalessin.cygnus.com>
1605
1606         * parse.c (follow_types):  Given (TYPE[]) (i.e. with no length),
1607         create a 0-length array type, and set BOUND_CANNOT_BE_DETERMINED.
1608         * valops.c (value_cast):  If a cast like (TYPE[])VALUE (i.e. array
1609         of unknown length) use sizeof(VALUE)/sizeof(TYPE) as the length.
1610         * c-typeprint.c (c_type_print_varspec_suffix):  If array length
1611         is 0, print it, but not if upper_bound is BOUND_CANNOT_BE_DETERMINED.
1612
1613 Thu Feb 16 16:06:50 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1614
1615         * dcache.c (insque, remque): Rewrite Linux support.
1616
1617 Wed Feb 15 12:33:20 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1618
1619         * config/powerpc/tm-ppc-eabi.h (TEXT_SEGMENT_BASE): Define as 1.
1620
1621         * dcache.c (insque, remque): If compiling in standard C on Linux,
1622         protect insque and remque with macros to cast the pointer
1623         arguments to the proper type.
1624
1625 Tue Feb 14 17:16:41 1995  Stu Grossman  (grossman@cygnus.com)
1626
1627         * annotate.c, breakpoint.c, defs.h, top.c:  Replace
1628         enable/disable_breakpoint_hook with modify_breakpoint_hook.
1629 start-sanitize-gdbtk
1630         * gdbtk.c: Ditto.
1631         * gdbtk.c: General cleanups, get rid of unused variables.  Redo
1632         handling of stdout/stderr to just return output as the result of
1633         the tcl command that caused the output.  Cleanup -Wall stuff.
1634         * (breakpoint_notify):  Now returns just action and breakpoint
1635         number.
1636         * (gdb_get_breakpoint_list):  New routine.  Does the obvious.
1637         * (gdb_get_breakpoint_info):  Mostly derived from the old
1638         breakpoint_notify, but returns lots more info.
1639         * (dsprintf_append_element):  Helper routine, works like printf,
1640         but appends a tcl element onto the specified DString.  Good for
1641         building up lists as return values.
1642         * (gdbtk_enable/disable_breakpoint):  Go away.  Replaced with
1643         gdbtk_modify_breakpoint.
1644         * (*many routines*):  Use new result protocol.
1645         * (call_wrapper):  Make sure that recursive calls don't trash results.
1646         * gdbtk.tcl:  New windows, autocmd, and breakpoints.
1647         * (gdbtk_tcl_fputs):  Don't use $current_output_win redirection
1648         anymore.  It's not needed (in fact, this routine may not be needed
1649         anymore).
1650         * (gdbtk_tcl_breakpoint):  Change to reflect new breakpoint
1651         notification protocol.
1652         * (gdbtk_tcl_busy gdbtk_tcl_idle):  Straighten out buttons, remove
1653         catches.
1654         * (interactive_cmd):  Use this wrapper around button invocations
1655         of many commands.  This will catch errors and put the results into
1656         the command window.  It also updates all the other windows.
1657         * Also, change reliefs of most things to sunken.  This actually
1658         looks better.
1659         * (create_file_win):  Fix margin binding to allow breakpoints to
1660         work again.
1661         * (create_asm_win):  Use return value of gdb_disassemble instead
1662         of implicit I/O to the command window.  
1663         * (create_command_window):  Use new result protocol to get output
1664         from commands.
1665 end-sanitize-gdbtk
1666
1667 Tue Feb 14 16:58:07 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
1668
1669         * expression.h: Move declaration of evaluate_subexp_with_coercion
1670         from here...
1671         * value.h: ...to here.
1672         * expression.h: Don't include value.h
1673
1674 Tue Feb 14 11:46:07 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
1675
1676         * expression.h: Move include of value.h until after declaration of
1677         enum exp_opcode.
1678
1679 Sun Feb 12 13:47:30 1995  Stan Shebs  <shebs@andros.cygnus.com>
1680
1681         * remote-e7000.c: Comprehensive cleanup; removal of dead code,
1682         simplify code, declare things, format to standards.
1683         (inferior.h, value.h, command.h, remote-utils.h): Include.
1684         (e7000_login): Rename to e7000_login_command.
1685         (e7000_ftp): Rename to e7000_ftp_command.
1686         (e7000_drain): Rename to e7000_drain_command.
1687
1688         * irix5-nat.c (string.h): Include near beginning of file.
1689
1690 Sun Feb 12 12:36:38 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
1691
1692         * valops.c (value_arg_coerce): Use VALUE_TYPE not SYMBOL_TYPE on
1693         arg, it is a value not a symbol.
1694
1695         gcc -Wall lint:
1696         * eval.c: Move declaration of evaluate_subexp_with_coercion from here..
1697         * expression.h: ..to here.
1698         * expression.h: Include value.h.
1699         * ch-lang.c (evaluate_subexp_chill): Add default case in switch.
1700
1701 Sun Feb 12 11:03:47 1995  Per Bothner  <bothner@kalessin.cygnus.com>
1702
1703         * language.h (struct language_defn):  New field evaluate_exp.
1704         * c-lang.c (c_language_defn, cplus_language_defn, asm_langauge_defn),
1705         f-lang.c (f_language_defn), language.c (unknown_language_defn,
1706         auto_language_defn, local_language_defn), m2-lang.c (m2_language_defn):
1707         Set evaluate_exp to evaluate_subexp_standard.
1708         * ch-lang.c (evaluate_subexp_chill):  New function.  Chill-specific
1709         support for MULTI_SUBSCRIPT.
1710         (chill_language_defn):  Set evaluate_exp to evaluate_subexp_chill.
1711         * eval.c (enum noside):  Move from here ....
1712         * expression.h (enum noside):  ... to here.
1713         (evaluate_subexp_standard):  New prototype.
1714         * eval.c (evaluate_subexp):  Renamed to evaluate_subexp_standard.
1715         Removed lo-longer-needed test for chill_varying_type.
1716         (evaluate_subexp):  New.  Calls exp->language_defn->evaluate_exp.
1717
1718         * ch-exp.y (maybe_expression_list):  New non-terminal.
1719         (primitive_value):  Allow empty parameter list.
1720
1721 Sun Feb 12 10:02:16 1995  Per Bothner  <bothner@cygnus.com>
1722
1723         * buildsym.c (finish_block):  If finishing a function without known
1724         parameter type info, set that from parameter symbols.
1725         * c-typeprint.c (c_type_print_varspec_suffix):  For TYPE_CODE_FUNC,
1726         print parameter types, if available.
1727         * ch-typeprint.c (chill_type_print_base):  Likewise.
1728
1729         * gdbtypes.h (struct type):  Remove function type field.
1730         (TYPE_FUNCTION_TYPE):  Remove macro.  We can't as simply re-use
1731         function types now that we're also storing parameter types.
1732         And the payoff is much less.
1733         * gdbtypes.c (make_function_type):  Don't use/set TYPE_FUNCTION_TYPE.
1734         (recursive_dump_type):  Don't print TYPE_FUNCTION_TYPE.
1735         * dwarfread.c (read_subroutine_type):  Don't set TYPE_FUNCTION_TYPE.
1736
1737         * valops.c (value_arg_coerce):  Now takes param_type argument.
1738         (call_function_by_hand):  Convert arguments with value_arg_coerce
1739         early, and overwrite original args with converted args.
1740         No longer need multiple calls to value_arg_coerce.
1741         (value_arg_push):  Removed.
1742         * hppa-tdep.c (hppa_push_arguments):  No longer call value_arg_coerce.
1743         * mips-tdep.c (mips_push_arguments):  Likewise.
1744         * alpha-tdep.c (alpha_push_arguments):  Likewise.
1745         * rs6000-tdep.c (push_arguments, ran_out_of_registers_for_arguments):
1746         Likewise.
1747         * value.h (value_arg_coerce):  Remove declaration.  (It's now static.)
1748
1749         * valops.c (value_cast):  Do COERCE_VARYING_ARRAY after COERCE_REF.
1750
1751         * symtab.c (add_param_to_type):  Remove (commented-out) function,
1752         since that functionality has been re-written.
1753         * coffread.c:  Remove commented-out add_param_to_type support.
1754         * mdebugread.c (parse_symbol):  Likewise.
1755         * stabsread.c (define_symbol):  Likewise.
1756
1757 Sun Feb 12 09:03:47 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
1758
1759         * buildsym.c (start_subfile): Set language for f2c like for cfront.
1760
1761 Thu Feb  9 20:20:11 1995  Rob Savoye  <rob@darkstar.cygnus.com>
1762
1763         * op50n-rom.c: Add the control registers.
1764
1765 Thu Feb  9 15:46:39 1995  Stan Shebs  <shebs@andros.cygnus.com>
1766
1767         * Makefile.in (CLIBS): Add $(LIBIBERTY) before, in addition to
1768         after, any host/target/native libraries.
1769         * dcache.c (insque, remque): Remove declarations.
1770         * gdbtypes.h (type_code): Remove trailing comma.
1771
1772         From Peter Schauer:
1773         * xcoffread.c (read_xcoff_symtab) [C_HIDEXT]: Move #ifdef
1774         STATIC_NODEBUG_VARS inside case.
1775
1776 Thu Feb  9 07:43:41 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
1777
1778         * config/sparc/tm-sun4sol2.h: Define STATIC_TRANSFORM_NAME.
1779         * partial-stab.h: Call it.
1780         * stabsread.c (define_symbol) [STATIC_TRANSFORM_NAME]: Call
1781         STATIC_TRANSFORM_NAME to get the name and use minimal symbols to
1782         get the address.
1783         * sparc-tdep.c (solaris_static_transform_name): New function.
1784
1785 Thu Feb  9 12:09:09 1995  Jeff Law  (law@snake.cs.utah.edu)
1786
1787         * somread.c (som_symtab_read): Handle dynamic relocation for both
1788         text and data symbols.
1789         (som_symfile_offsets): If objfile is a shared library, then get
1790         text and data offsets from the shared library structures.
1791         * somsolib.c (som_solib_add): Copy the bfd pointer from the
1792         objfile rather than reopening the file again.
1793         (som_solib_section_offsets): New function.
1794         * somsolib.h (som_solib_section_offsets): Declare.
1795
1796 Wed Feb  8 20:32:18 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
1797
1798         * config/sparc/tm-sun4sol2.h, dbxread.c: Rename
1799         N_SO_ADDRESS_MAYBE_MISSING to SOFUN_ADDRESS_MAYBE_MISSING.
1800         * symtab.h (minimal_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]: Add
1801         filename field.
1802         * elfread.c (record_minimal_symbol_and_info),
1803         minsyms.c, symtab.h (prim_record_minimal_symbol_and_info): Return
1804         newly created symbol.
1805         * elfread.c (elf_symtab_read) [SOFUN_ADDRESS_MAYBE_MISSING]:
1806         Set filename field of minimal symbol.
1807         * symmisc.c (dump_msymbols) [SOFUN_ADDRESS_MAYBE_MISSING]:
1808         Print filename field.
1809         * minsyms.c, symtab.h (lookup_minimal_symbol): New arg sfile.
1810         * symm-tdep.c, somsolib.c, hppa-tdep.c, c-exp.y, f-exp.y,
1811         m2-exp.y, nindy-tdep.c, m3-nat.c, irix5-nat.c, hpread.c,
1812         os9kread.c, breakpoint.c, alpha-tdep.c, valops.c, symtab.c,
1813         printcmd.c, dbxread.c: Change callers to pass NULL for sfile.
1814         * dbxread.c (process_one_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]:
1815         Find address of function from minimal symbols.
1816         * partial-stab.h, case 'f', 'F': Call find_stab_function_addr
1817         instead of getting pst->textlow from the stab.
1818         * minsyms.c (find_stab_function_addr): New function.
1819
1820 Wed Feb  8 19:19:56 1995  Rob Savoye  <rob@darkstar.cygnus.com>
1821
1822         * monitor.c: Fix so all the output shows up in the GUI command
1823         window.
1824
1825 Mon Feb  6 18:50:59 1995  Stan Shebs  <shebs@andros.cygnus.com>
1826
1827         * i386-tdep.c (_initialize_i386_tdep): Put void decl on separate
1828         line, so init.c generation works correctly.
1829 start-sanitize-arc
1830         * arc-tdep.c (_initialize_arc_tdep): Ditto.
1831 end-sanitize-arc
1832
1833 Mon Feb  6 14:44:36 1995  Rob Savoye  <rob@darkstar.cygnus.com>
1834
1835         * config/mips/idt.mt: Add support for the lsi33k target.
1836         * config/sparc/sun4sol2.mh: Add support for ser-tcp.
1837         * array-rom.c: Finish the rest of the support commands needed by
1838         GDB.
1839         * mips-tdep.c: Add LSI33k register names and processor type.
1840
1841 start-sanitize-gdbtk
1842 Sun Feb  5 20:32:44 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
1843
1844         * gdbtk.c (gdb_disassemble): Deference pointer to function before
1845         calling it (pre-ANSI compilers generally require this).
1846
1847 end-sanitize-gdbtk
1848 Sat Feb  4 13:29:52 1995  Stan Shebs  <shebs@andros.cygnus.com>
1849
1850         * config/m68k/est.mt (TDEPFILES): Remove m68k-pinsn.o.
1851
1852 Fri Feb  3 16:47:31 1995  Kung Hsu  <kung@mexican.cygnus.com>
1853
1854         * ser-go32-para.c (dos_read): fix syntax errors.
1855
1856 Fri Feb  3 11:19:20 1995  Stu Grossman  (grossman@cygnus.com)
1857
1858         * core.c (dis_asm_read_memory), defs.h, top.c: Get rid of
1859         dis_asm_read_memory_hook.  We can now call the disassemblers
1860         directly and have no need for this hook anymore.
1861 start-sanitize-gdbtk
1862         * gdbtk.c (gdb_disassemble): Ditto.
1863 end-sanitize-gdbtk
1864         * defs.h, printcmd.c: Make print_insn be static.
1865
1866         * ser-go32.c (dos_comisr):  Make this 8 bit clean.
1867         * (dos_open dos_close):  Allow multiple opens to the same device.
1868         Use a ref count to prevent unwanted deallocations.
1869         * sparcl-tdep.c:  Put #ifdefs around all socket stuff to make GO32
1870         happy.
1871         * (sparclite_ops):  Switch to download_stratum.
1872         * target.h (enum strata):  Move download_stratum before
1873         process_stratum so that executable targets get pushed on top of
1874         download targets.
1875
1876 Thu Feb  2 19:02:45 1995  Rob Savoye  <rob@darkstar.cygnus.com>
1877
1878         * array-rom.c: Remove the non GDB remote protocol config stuff.
1879
1880         * monitor.c: All reading/writing functions for memory and
1881         registers work.
1882
1883 Thu Feb  2 16:11:04 1995  Kung Hsu  <kung@mexican.cygnus.com>
1884
1885 start-sanitize-arc
1886         * config/arc/arc.mt: new target makefile for arc processor.
1887         * config/arc/tm-arc.h: new target header for arc processor.
1888         * config/arc/go32.mh: new go32 host makefile for arc processor.
1889         * config/arc/xm-go32.h: new go32 host header for arc processor.
1890         * arc-tdep.c: new target dependent codes for arc processor.
1891         * remote-arc.c: new file for arc-specific protocol through
1892         parallel line.
1893 end-sanitize-arc
1894         * ser-go32-para.c: new file for go32 parallel port communication.
1895
1896 Thu Feb  2 13:58:40 1995  Stan Shebs  <shebs@andros.cygnus.com>
1897
1898         * Makefile.in (VERSION): Bump to 4.13.2.
1899
1900 Thu Feb  2 07:27:56 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
1901
1902         Fix compiler warnings:
1903         * remote-e7000.c (printf_e7000debug): Rename to puts_e7000debug
1904         and have the caller do the sprintf.  Saves us from varargs hell.
1905         (normal): Define before use.
1906         * remote-e7000.c: Reindent a few things.
1907
1908 Wed Feb  1 21:16:42 1995  Per Bothner  <bothner@kalessin.cygnus.com>
1909
1910         * f-typeprint.c (f_type_print_varspec_suffix):  Print array index
1911         ranges in reverse order.
1912         * f-valprint.c (f77_create_arrayprint_offset_tbl):  Fix calculation.
1913
1914         * eval.c (evaluate_subscript):  Don't call value_subscript, since
1915         it adjusts for lower bound and enforces ranges.
1916
1917         * expression.h (exp_code):  Remove MULTI_F77_SUBSCRIPT, OP_F77_SUBSTR.
1918         * eval.c, parse.c:  Removed uses of removed opcodes.
1919         * eval.c (evaluate_subexp):  Clean up handling of
1920         OP_UNDETERMINED_ARGLIST (no backtracking, more general).
1921
1922         * f-valprint.c (f_val_print):  Print TYPE_CODE_STRING using
1923         LA_PRINT_STRING, and not val_print_string (which reads from inferior).
1924
1925         * ch-lang.c (chill_is_varying_struct), ch-lang.h:  Remve function
1926         duplicate function made redundant by chill_varying_type.
1927
1928         Re-write of f77 string and complex number support:
1929
1930         * language.h (struct language_defn):  New fields string_lower_bound
1931         and string_char_type.
1932         * c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn),
1933         language.c (unknown_language_defn, auto_language_defn,
1934         local_language_defn), m2-lang.c (m2_language_defn), f-lang.c
1935         (f_language_defn), ch-lang.c (chill_language_defn):  Set new fields.
1936         * gdbtypes.c (create_string_type):  Use new string_char_type field.
1937         * valops.c (value_string):  Use new string_lower_bound field.
1938
1939         * defs.h (TARGET_COMPLEX_BIT, TARGET_DOUBLE_COMPLEX_BIT):  Removed.
1940         * f-lang.c (f_create_fundamental_type, _initialize_f_language),
1941         m2-lang.c (m2_create_fundamental_type),
1942         gdbtypes.c (_initialize_gdbtypes):  Set TYPE_TARGET_TYPE of complex
1943         types.  Set their TYPE_CODEs to TYPE_CODE_COMPLEX.
1944         * mdebugread.c (mdebug_type_complex, mdebug_type_double_complex):
1945         Removed.  Use builtin_type_complex and builtin_type_double_complex.
1946
1947         * gdbtypes.h (enum type_code):  Removed TYPE_CODE_LITERAL_STRING
1948         and TYPE_CODE_LITERAL_COMPLEX.
1949         * c-typeprint.c, f-typeprint.c, f-valprint.c, eval.c:  Removed uses of
1950         TYPE_CODE_LITERAL_STRING and TYPE_CODE_LITERAL_COMPLEX.
1951         * gdbtypes.c, gdbtypes.h (f77_create_literal_complex_type,
1952         f77_create_literal_string_type):  Removed.
1953         * value.h (VALUE_LITERAL_DATA, VALUE_SUBSTRING_MEMADDR,
1954         VALUE_SUBSTRING_MYADDR):  Removed.
1955
1956         * expression.h (enum exp_opcode):  Rename OP_F77_LITERAL_COMPLEX to
1957         OP_COMPLEX.
1958         * parse.c:  Update accordingly.
1959
1960         * f-valprint.c (f77_print_cmplx):  Removed.
1961         (f_val_print case TYPE_CODE_COMPLEX):  Re-write to use print_floating.
1962
1963         * f-exp.y (STRING_LITERAL):  Use OP_STRING instead of OP_ARRAY.
1964         * eval.c (evaluate_subexp):  For case OP_ARRAY, don't call
1965         f77_value_literal_string.
1966         * valops.c, value.h (f77_value_literal_string, f77_value_substring,
1967         f77_assign_from_literal_string, f77_assign_from_literal_complex):
1968         Removed.
1969         (value_assign):  No longer need to handle literal types.
1970         * valops.c (f77_value_literal_complex), value.h:  Re-written and
1971         renamed to value_literal_complex.  Last arg is now a (complex) type.
1972         * valops.c (f77_cast_into_complex):  Re-written and renamed to
1973         cast_into_complex.
1974         * eval.c (evaluate_subexp):  Update accordingly.
1975
1976         * ch-valprint.c (chill_val_print):  On TYPE_CODE_STRING, don't
1977         print address for non-'s'-formats.
1978         * ch-typeprint.c, ch-valprint.c:  Use chill_varying_type instead
1979         of chill_is_varying_struct.
1980
1981 Wed Feb  1 13:27:33 1995  Stan Shebs  <shebs@andros.cygnus.com>
1982
1983         gcc -Wall lint.
1984         * alpha-tdep.c (alpha_in_lenient_prologue): Comment out.
1985         (after_prologue): Remove unused local b.
1986         * procfs.c (thread.h): Include.
1987         (pr_flag_table, pr_why_table, faults_table, siginfo_table): Use
1988         nested braces in initializer.
1989         * top.c (initialize_targets, initialize_utils): Declare.
1990         (locate_arg, insert_args): Add parens around tested assignments.
1991         * remote-utils.c (sr_scan_args): Remove decl of strtol.
1992         * remote.c (thread.h): Include.
1993         (remote_wait): Remove unused local p2.
1994         * sparc-tdep.c (fill_gregset, fill_fpregset): Remove decls of
1995         registers array.
1996
1997         defs.h (stdlib.h): Include.
1998         (exit, perror, atoi, qsort, memcpy, memcmp): Don't declare.
1999         (fclose, atof, malloc, realloc, free, strchr, strrchr, strstr,
2000         strtok, strerror): Don't specify parameter types in declaration.
2001
2002 Wed Feb  1 12:23:57 1995  Per Bothner  <bothner@kalessin.cygnus.com>
2003
2004         * ch-exp.y (value_string_element, string_primitive_value,
2005         start_element, left_element, right_element, slice_size,
2006         lower_element, upper_element, first_element):  Removed.
2007         (value_string_slice, value_array_slice):  Replaced by ...
2008         (slice):  New non-terminal, with working slice support.
2009         (primitive_value_lparen, rparen):  New non-terminals.
2010         (maybe_tuple_elements):  New non-terminal, to allow empty tuples.
2011         (idtokentab):  Added "up".
2012
2013         * value.h (COERCE_VARYING_ARRAY):  New macro.
2014         * valarith.c (value_subscript):  Use it.
2015         * valops.c (value_cast):  Likewise.  Also, do nothing if already
2016         correct type, and allow converting from/to range to/from scalar.
2017
2018         * valops.c, value.h (varying_to_slice, value_slice):  New functions.
2019         * eval.c (OP_ARRAY):  Add cast for array element.
2020         * expression.h (TERNOP_SLICE, TERNOP_SLICE_COUNT):  New exp_opcodes.
2021         * valops.c (chill_varying_type):  Moved function frp, here ...
2022         * gdbtypes.c (chill_varying_type), gdbtypes.h: ... to here.
2023         * parse.c (length_of_subexp, prefixify_subexp):  Add support
2024         for TERNOP_SLICE, TERNOP_SLICE_COUNT.
2025         * expprint.c (print_subexp, dump_expression):  Likewise.
2026         * eval.c (evaluate_subexp):  Likewise.
2027
2028         * eval.c (evaluate_subexp case MULTI_SUBSCRIPT):  Don't call
2029         value_x_binop on a Chill varying string.
2030
2031 Tue Jan 31 13:51:53 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
2032
2033         * config/m68k/monitor.mt,
2034         config/pa/{hppabsd.mt,hppahpux.mt,hppaosf.mt,hppapro.mt}: Put
2035         depfiles in TDEPFILES not REMOTE_O.
2036
2037 Tue Jan 31 11:14:44 1995  Steve Chamberlain  <sac@splat>
2038
2039         From nigel@algor.co.uk.
2040         * ser-go32.c (dos_close): Don't crash if scb null.
2041         (dos_sendbreak): New function.
2042         (dos_ops): Point to dos_sendbreak.
2043         (dos_info): Calculate COM number correctly.
2044
2045 Tue Jan 31 09:40:11 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
2046
2047         * xcoffread.c (process_xcoff_symbol): Use new variables
2048         func_symbol_type and var_symbol_type as type of functions and
2049         variables which don't have any stabs associated with them.
2050         Reindent most of function.
2051         (_initialize_xcoffread): Initialize *_symbol_type.
2052
2053         * xcoffread.c (read_xcoff_symtab): Reindent most of function.
2054         Put C_HIDEXT symbols in the minimal symbols, rather than ignoring
2055         them (this part commented out as I didn't quite get it to work).
2056         (cs_to_section, find_targ_sec): New functions, to support above code.
2057         * xcoffread.c (RECORD_MINIMAL_SYMBOL): Only skip '.' if it is
2058         actually present.
2059
2060 Mon Jan 30 17:34:24 1995  Stu Grossman  (grossman@cygnus.com)
2061 start-sanitize-gdbtk
2062         * gdbtk.tcl (create_file_win):  Disable old popup menu for source
2063         window.
2064 end-sanitize-gdbtk
2065         * sparcl-tdep.c:  Add `sparclite' target for doing serial and udp
2066         downloads to SPARClite demo boards.
2067
2068 Sun Jan 29 09:43:22 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
2069
2070         * remote.c, remote-pa.c: Remove #if 0'd icache code.  It has had
2071         no hope of working as is for a long time (in particular, shebs' 27
2072         Jan 95 change confuses the issue further--target_read_memory and
2073         xfer_core_file do *not* do the same thing in this context).
2074         Revise comment.
2075
2076 Sat Jan 28 13:40:46 1995 Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2077
2078         * elfread.c (elf_symtab_read):  Do not test BSF_GLOBAL for
2079         procedure linkage table symbols, it is no longer set due to the
2080         Jan 6 BFD change in bfd/elfcode.h.
2081
2082 Fri Jan 27 17:08:06 1995  Stan Shebs  <shebs@andros.cygnus.com>
2083
2084         * top.c (use_windows): Clarify comments.
2085
2086         * convex-tdep.c (xfer_core_file): Comment out.
2087         * config/convex/tm-convex.h (XFER_CORE_FILE): Remove.
2088         * remote.c, remote-pa.c (remote_fetch_word): Change xfer_core_file
2089         references to target_read_memory.
2090         * gdbcore.h (xfer_core_file, core_open, core_detach): Remove
2091         declarations.
2092         * corelow.c (core_open, core_detach): Make static.
2093
2094         * arm-tdep.c: Make it compile.
2095         (exec_file_command, xfer_core_file): Comment out.
2096         (arm_print_insn): Remove, now in libopcodes.
2097         (skip_prologue): Comment out most of body.
2098         (arm_frame_find_saved_regs): Move here from tm-arm.h.
2099         (_initialize_arm_tdep): Set tm_print_insn.
2100         * config/arm/tm-arm.h: Remove old refs to first_object_file_end.
2101         (XFER_CORE_FILE): Remove.
2102         (FRAME_FIND_SAVED_REGS): Call arm_frame_find_saved_regs.
2103         
2104 Fri Jan 27 08:48:28 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
2105
2106         * Makefile.in (CHILL_LIB): Define as in testsuite/Makefile.in.
2107
2108 Thu Jan 26 18:24:41 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
2109
2110         * symtab.c (find_pc_line): When subtracting one to get a line
2111         number, make sure not to end up with zero.
2112
2113         * remote-vx.c: Revert all of Kung's changes of 16 Jan.  The
2114         problems with those changes were (a) the file didn't compile, (b)
2115         they changed memset to bzero--memset is correct, (c) they took out
2116         code to deal with boards lacking floating point, (d) who knows
2117         what I didn't discover in a quick read.
2118
2119 Thu Jan 26 17:32:54 1995  Stu Grossman  (grossman@cygnus.com)
2120
2121         * sparcl-tdep.c:  Clean up formatting and indentation.
2122
2123 Thu Jan 26 10:49:59 1995  Steve Chamberlain  <sac@splat>
2124
2125         * remote-hms.c (hms_ops): Change ref of hr_load_image
2126         to gr_load_image.
2127         (dcache_flush, dcache_hit, dcache_value, dcache_fetch,
2128         dcache_poke, dcache_init):  Deleted.
2129         (hms_open, hms_resume, hms_fetch_word, hms_store_word):
2130         Use dcache routines provided by remote-util.h
2131
2132 Thu Jan 26 12:08:31 1995  Michael Meissner  <meissner@cygnus.com>
2133
2134         * configure.in: Add support for powerpc-*-eabi.
2135
2136         * powerpc/tm-ppc-eabi.h, powerpc/pcc-eabi.mt: New files for
2137         PowerPC support.
2138
2139 Wed Jan 25 18:13:14 1995  Per Bothner  <bothner@kalessin.cygnus.com>
2140
2141         * language.h (struct language_defn):  New field c_style_arrays.
2142         * language.c (unknown_language_defn, auto_language_defn,
2143         local_language_defn), c-lang.c (c_language_defn, cplus_language_defn,
2144         asm_language_defn):  Set c_style_arrays to true.
2145         * m2-lang.c (m2_language_defn), ch-lang.c (chill_language_defn),
2146         f-lang.c (f_language_defn):  Set c_style_arrays to false.
2147         * valops.c (value_string):  If c_style_array is not set,
2148         allocate string in gdb (not inferior) using allocate_value.
2149
2150         * value.h (COERCE_ARRAY), valops.c (value_addr, value_arg_coerce):
2151         Only call value_coerce_array if current_language->c_style_arrays.
2152         * values.c:  Add #include "language.h".  (Needed for COERCE_ARRAY.)
2153
2154         * valops.c (chill_varying_type):  New predicate.
2155         * valops.c (value_cast):  Support assigning a fixed string or array
2156         to a variable string/array structure.
2157
2158         * valarith.c (value_subscripted_rvalue):  Extra parameter lowerbound.
2159         Check index>=lowerbound, and then add lowerbound to index here,
2160         instead of in caller.  Generalize to arbitrary lval_types.
2161         (value_subscript):  Use enhanced value_subscripted_rvalue if
2162         c_style_arrays is false (and index is in range).
2163
2164 start-sanitize-gdbtk
2165 Wed Jan 25 18:23:46 1995  Stu Grossman  (grossman@cygnus.com)
2166
2167         * gdbtk.c (gdbtk_init):  Prevent segfault when gdbtk.tcl can't be
2168         found.
2169         * gdbtk.tcl:  Initialize expr_update_list() to prevent errors when
2170         popping up expression window for the first time.
2171 end-sanitize-gdbtk
2172
2173 Wed Jan 25 18:13:14 1995  Per Bothner  <bothner@kalessin.cygnus.com>
2174
2175         * eval.c (evaluate_subexp case OP_ARRAY):  Fix calls to memset:
2176         TYPE_LENGTH is length in bytes, not bits.
2177
2178 Wed Jan 25 08:19:35 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
2179
2180         * infrun.c (proceed): Flush stdout before resuming inferior.
2181         * infcmd.c (step_1), annotate.c (annotate_starting):
2182         Don't bother to flush here.
2183
2184 Wed Jan 25 01:11:21 1995  Jeff Law  (law@snake.cs.utah.edu)
2185
2186         * hpread.c (hpread_process_one_debug_symbol): Fix lines garbled
2187         by an ill-advised global search and replace.
2188
2189 Tue Jan 24 12:10:28 1995  Stu Grossman  (grossman@cygnus.com)
2190
2191         * gdbtk.tcl (create_registers_window):  Work around a radiobutton
2192         widget bug to make Options|Natural button work.
2193
2194         * gdbtk.c (gdb_disassemble):  Fix problem with source+assembly and
2195         g++ caused by out-of-order pc's.
2196         * gdbtk.tcl (files_command):  Remove duplicate file names.  Also,
2197         add scrollbar.
2198
2199 Mon Jan 23 17:21:09 1995  Stu Grossman  (grossman@cygnus.com)
2200
2201         * gdbtk.tcl:  Take .gdbtkinit if it exists.  Makes gdbtk match the
2202         doc!
2203
2204 Mon Jan 23 13:11:46 1995  Per Bothner  <bothner@kalessin.cygnus.com>
2205
2206         Add support for Chill bitstring literals (e.h. H'FF00').
2207         * ch-exp.y (match_bitstring_literal):  Fix for proper endianness.
2208         * expprint.c (print_subexp):  Don't call error on OP_BITSTRING,
2209         just print B'<unimlemented>'.
2210         * gdbtypes.c (create_set_type):  Fix bug in length calculation.
2211         * valops.c, value.h (value_bitstring):  New function.
2212         * eval.c (evaluate_subexp):  Implement support for OP_BITSTRING.
2213
2214         * ch-typeprint.c (chill_type_print_base): For TYPE_CODE_FUNC,
2215         check that return type is non-void, and print in proper Chill syntax.
2216
2217 Mon Jan 23 12:20:34 1995  Rob Savoye  <rob@darkstar.cygnus.com>
2218
2219         * Makefile.in: Remove references to remote-mon.c.
2220         * remote-mon.c: remove. Replaced by rom68k-rom.c.
2221         * rom68k-rom.c: Support for Rom68k monitor.
2222
2223 Mon Jan 23 10:50:57 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
2224
2225         * Makefile.in (CHILL_FOR_TARGET): Update -L argument to point to
2226         gcc/ch/runtime not chillrt, since that is where the chill runtime
2227         lives now.
2228
2229 Mon Jan 23 00:06:57 1995  Steve Chamberlain  <sac@splat>
2230
2231         * remote-hms.c (hms_load): Delete.
2232         (target_ops): Use hr_load_image.
2233
2234         * remote-e7000.c, remote-z8k.c, remote-nindy.c (target_ops):
2235         Define memory_insert/remove_breakpoint.
2236         * xm-go32.h: Remove redundant SIGs.
2237         
2238 Thu Jan 19 20:26:58 1995  Steve Chamberlain  <sac@splat>
2239
2240         * ser-go32.c: Rewritten by nigel@algor.co.uk.
2241
2242 Fri Jan 20 15:23:55 1995  Per Bothner  <bothner@kalessin.cygnus.com>
2243
2244         * expression.h (OP_LABELED):  New operator, for Chill
2245         labeled structre tuples.
2246         * ch-exp.y (tuple_element, named_record_element, tuple_elements):
2247         New non-terminals, to handle labeled structure tuples.
2248         (tuple):  Re-define using tuple_elements.
2249         * eval.c (evaluate_labeled_field_init):  New function, to handle
2250         initialization of structure fields, possibly using OP_LABELED.
2251         (evaluate_subexp):  Use it.
2252         * expprint.c (print_subexp case):  For OP_ARRAY, use Chill syntax
2253         for Chill.  Handled OP_LABELED.
2254         * parse.c (length_of_subexp, prefixify_subexp):  Handle OP_LABELED.
2255
2256         * eval.c (evaluate_subexp):  Handle Chill Powerset tuples.
2257         * valarith.c (value_bit_index):  Just treat bitstring as represented
2258         by an array of bytes.  Alignment is handled by compiler. 
2259
2260 Wed Jan 18 19:00:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
2261
2262         * h8300-tdep.c (gdb_print_insn_h8300): Fix typo (&info -> info).
2263         * sh-tdep.c (gdb_print_insn_sh): Ditto.
2264
2265 Wed Jan 18 11:25:43 1995  Kung Hsu  <kung@mexican.cygnus.com>
2266
2267         * remote-os9k.c (rombug_open): Fix a bug in exception handling
2268         command.
2269         * remote-os9k.c (rombug_write_inferior_memory): reset buffer after
2270         write.
2271
2272 Tue Jan 17 09:48:38 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>
2273
2274         * parse.c (_initialize_parse): Improve wording of names of
2275         msym_*_symbol_type.
2276
2277 Tue Jan 17 14:00:58 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2278
2279         * config/mips/tm-mips.h (enum mips_fpu_type): New enum.
2280         (mips_fpu): Change type to enum mips_fpu_type.
2281         (FIX_CALL_DUMMY): Handle mips_fpu == MIPS_FPU_SINGLE.
2282         * mips-tdep.c (mips_fpu): Change type to enum mips_fpu_type.
2283         Don't initialize.
2284         (mips_fpu_string): New static variable.
2285         (mips_push_dummy_frame): Handle mips_fpu == MIPS_FPU_SINGLE.
2286         (mips_pop_frame): Likewise.
2287         (mips_extract_return_value): Likewise.
2288         (mips_store_return_value): Likewise.
2289         (mips_set_fpu_command): New static function.
2290         (mips_show_fpu_command): New static function.
2291         (_initialize_mips_tdep): Change handling of set/show mipsfpu.
2292
2293 Tue Jan 17 09:48:38 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>
2294
2295         * a29k-tdep.c (gdb_print_insn_a29k): Fix typo (&info -> info).
2296
2297         * parse.c (write_exp_msymbol): Use new variables
2298         msym_*_symbol_type as type of msymbol expression.
2299         (_initialize_parse): Initialize them.
2300
2301 Mon Jan 16 18:11:03 1995  Stan Shebs  <shebs@andros.cygnus.com>
2302
2303         General cleanup and simplication of disassembler interface.
2304         * a29k-pinsn.c, arm-pinsn.c, convex-pinsn.c, gould-pinsn.c,
2305         hppa-pinsn.c, i386-pinsn.c, i960-pinsn.c, m68k-pinsn.c,
2306         m88k-pinsn.c, mips-pinsn.c, ns32k-pinsn.c, pyr-pinsn.c,
2307         rs6000-pinsn.c, sparc-pinsn.c, tahoe-pinsn.c, vax-pinsn.c: Remove.
2308         * gould-tdep.c, ns32k-tdep.c, tahoe-tdep.c, vax-tdep.c: New files,
2309         had been -pinsn.c files.
2310         * Makefile.in (ALLDEPFILES): Remove removed files.
2311         (a29k-pinsn.o, arm-pinsn.o, convex-pinsn.o, gould-pinsn.o,
2312         hppa-pinsn.o, i386-pinsn.o, i960-pinsn.o, m68k-pinsn.o,
2313         m88k-pinsn.o, mips-pinsn.o, ns32k-pinsn.o, pyr-pinsn.o,
2314         rs6000-pinsn.o, sparc-pinsn.o, tahoe-pinsn.o, vax-pinsn.o):
2315         Remove compile actions.
2316         * arm-tdep.o, gould-tdep.o, ns32k-tdep.o, tahoe-tdep.o,
2317         vax-tdep.o: Add compile actions.
2318         * defs.h (tm_print_insn): New global.
2319         * a29k-tdep.c (gdb_print_insn_a29k): New function.
2320         (_initialize_a29k_tdep): Rename from _initialize_29k,
2321         set tm_print_insn.
2322         * alpha-tdep.c (print_insn): Remove.
2323         (_initialize_alpha_tdep): Set tm_print_insn.
2324         * arm-tdep.c (arm_print_insn): New function, was print_insn
2325         in arm-pinsn.c.
2326         * convex-tdep.c (convex_print_insn): New function, was print_insn
2327         in convex-pinsn.c.
2328         * h8300-tdep.c (print_insn): Remove.
2329         (gdb_print_insn_h8300): New function.
2330         (_initialize_h8300_tdep): New function.
2331         * h8500-tdep.c (print_insn): Remove.
2332         (_initialize_h8500_tdep): New function.
2333         * hppa-tdep.c (_initialize_hppa_tdep): Set tm_print_insn.
2334         * i386-tdep.c (_initialize_i386_tdep): New function.
2335         * i960-tdep.c (mem, next_insn): New functions, were in
2336         i960-pinsn.c.
2337         (_initialize_i960_tdep): Set tm_print_insn.
2338         * m68k-tdep.c (_initialize_m68k_tdep): New function.
2339         * m88k-tdep.c (_initialize_m88k_tdep): New function.
2340         * mips-tdep.c (gdb_print_insn_mips): New function.
2341         (_initialize_mips_tdep): Set tm_print_insn.
2342         * pyr-tdep.c (pyr_print_insn): New function, was print_insn
2343         in pyr-pinsn.c.
2344         * rs6000-tdep.c (_initialize_rs6000_tdep): New function.
2345         * sh-tdep.c (print_insn): Remove.
2346         (gdb_print_insn_sh): New function.
2347         (_initialize_sh_tdep): Set tm_print_insn.
2348         * sparc-tdep.c (_initialize_sparc_tdep): New function.
2349         * w65-tdep.c (print_insn): Remove.
2350         (_initialize_w65_tdep): New function.
2351         * z8k-tdep.c (print_insn): Remove.
2352         (gdb_print_insn_z8k): New function.
2353         (_initialize_z8k_tdep): Set tm_print_insn.
2354         * printcmd.c (print_insn): New function, generic disassembler.
2355         * config/*/*.mt (TDEPFILES): Remove refs to *-pinsn.o.
2356
2357 Mon Jan 16 15:43:29 1995  Kung Hsu  <kung@mexican.cygnus.com>
2358
2359         * Makefile.in: add new files remote-vx29k.c, config/a29k/tm-vx29k.h,
2360         and config/a29k/vx29k.mt.
2361         * configure.in: add new configuration a29k-*-vxworks.
2362         * remote-vx29k.c: new file merged from WRS.
2363         * remote-vx.c: merge changes from WRS.
2364         * config/a29k/vx29k.mt: new file for new configuration.
2365         * config/a29k/tm-vx29k.h: new header file for newconfiguration.
2366
2367 Sun Jan 15 14:36:19 1995  Steve Chamberlain  <sac@splat>
2368
2369         * breakpoint.h (disable_breakpoint, enable_breakpoint):
2370         New declarations.
2371         (enum bpdisp): Change name of 'delete' member to 'del'.
2372         (struct bpstat): Changed name to 'bpstats'.
2373         * breakpoint.c (disable_breakpoint, enable_breakpoint,
2374         breakpoint_chain): Made globally visible.
2375         (bpstat_stop_status): Use new name for bpstat.
2376         (break_command_1, watch_command_1, catch_command_1,
2377         breakpoint_auto_delete, denable_delete_breakpoint): Use 'del'
2378         instead of 'delete'.
2379         (set_breakpoint_sal): New function.
2380         * defs.h (registers_changed_hook): New declaration.
2381         * infcmd.c (run_stack_dummy): 'delete' is now 'del'.
2382         * inflow.c (new_tty): Treat WIN32 in same way as __GO32__       
2383         * main.c (main): Don't scan options when in WIN32 and exit
2384         without entering main loop.
2385         * m2-exp.y (m2_elx): Member 'class' is now 'aclass'.
2386         * symtab.h (struct symbol, struct partial_symbol): Changed name of
2387         member 'class' to 'aclass'. 
2388         (SYMBOL_CLASS, PSYMBOL_CLASS): Reflect change.
2389         * top.c (registers_changed_hook): New definition.
2390         * utils.c (quit, notice_quit, initialize_utils): Treate WIN32
2391         in same way as __GO32__.
2392         * value.h (c_typedef_print): Rename 'new' argument.
2393
2394         * w65-tdep.c, config/tm-w65.h, config/w65.mt: New files.
2395         * configure.in: Suppprt for w65,
2396
2397
2398 Sat Jan 14 11:18:11 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>
2399
2400         * infcmd.c (signal_command): For "signal 0", pass (CORE_ADDR)-1,
2401         not stop_pc, to proceed.
2402
2403         * eval.c (evaluate_subexp): Clear expect_type except for C++ and CHILL.
2404
2405 Fri Jan 13 17:52:57 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>
2406
2407         * infcmd.c (signal_command): Accept "signal 0"; the change to not
2408         accept it was accidental.  "handle 0" and "info signal 0" remain
2409         illegal, though.
2410
2411 Fri Jan 13 15:19:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
2412
2413         * Makefile.in (all): Don't make libgdb-files.
2414         (libgdb): New action, makes libgdb-files.
2415
2416 Thu Jan 12 21:23:25 1995  Per Bothner  <bothner@kalessin.cygnus.com>
2417
2418         * stabsread.c (read_enum_type):  When pending enum symbols are
2419         put into the enum type, they must be inserted in "backwards
2420         order, in case we've overflowed a struct pending buffer.
2421
2422 start-sanitize-gdbtk
2423 Thu Jan 12 15:02:40 1995  Stu Grossman  (grossman@cygnus.com)
2424
2425         * gdbtk.c, gdbtk.tcl:  Update/add copyright.
2426         * gdbtk.tcl (build_framework):  Several fixes for filespec widget,
2427         including dismiss button, and better error handling.
2428         * (create_command_win):  Bind button 2 to retrieve selection.
2429 end-sanitize-gdbtk
2430
2431 Thu Jan 12 09:33:24 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2432
2433         * README:  Add note about SPARCworks cc release 3.0 and higher.
2434
2435         Add procfs support for Alpha OSF/1-2.x.
2436         * config/alpha/nm-osf.h:  Renamed from nm-alpha.h, generic
2437         OSF/1 native support.
2438         * config/alpha/alpha-osf1.mh (NAT_FILE):  Changed accordingly.
2439         (MUNCH_DEFINE):  Removed.
2440         * config/alpha/alpha-osf2.mh, config/alpha/nm-osf2.h:  New files
2441         for procfs support.
2442         * configure.in (alpha-dec-osf*):  Use alpha-osf2.mh for OSF/1
2443         release 2.x and higher, else alpha-osf1.mh, as the procfs support
2444         in release 1.x is incomplete.
2445         * Makefile.in (ALLCONFIG):  Add config/alpha/alpha-osf2.mh.
2446         * alpha-nat.c (supply_gregset, fill_gregset, supply_fpgregset,
2447         fill_fpgregset):  New routines for procfs support.
2448         * inftarg.c (_initialize_inftarg):  Don't add ptrace support
2449         if we have an optional procfs and /proc is accessible.
2450         * procfs.c:  Include sys/fault.h and sys/syscall.h before
2451         including sys/procfs.h.
2452         (unconditionally_kill_inferior):  If PROCFS_NEED_PIOCSSIG_FOR_KILL
2453         is defined, additionally perform a PIOCSSIG to really terminate
2454         the inferior.
2455         (create_procinfo):  Always return a result.
2456         (create_procinfo, do_attach):  Don't trace T_IFAULT faults if
2457         PROCFS_DONT_TRACE_IFAULT is defined.
2458         (procfs_init_inferior):  Use START_INFERIOR_TRAPS_EXPECTED as
2459         argument to startup_inferior if it is defined.
2460         (proc_set_exec_trap):  If PIOCSSPCACT is defined, use it instead
2461         of tracing exits from exec system calls. Needed for the user level
2462         loader under Alpha OSF/1.
2463         (do_detach):  Clear any pending signal if we want to detach from
2464         a process without a signal.
2465         (set_proc_siginfo):  If PROCFS_DONT_PIOCSSIG_CURSIG is defined,
2466         don't issue a PIOCSSIG if pr_cursig already contains the signal we
2467         intend to set.
2468         (info_proc_signals):  If PROCFS_SIGPEND_OFFSET is defined, the
2469         pending signals are numbered from 1 instead of 0.
2470         (info_proc_mappings):  Increase size of output format for addresses
2471         if BFD_HOST_64_BIT is defined.
2472         (procfs_stop):  Renamed from child_stop.
2473         (_initialize_procfs):  Don't add procfs support if we have an
2474         optional procfs and /proc is not accessible.
2475
2476 start-sanitize-gdbtk
2477 Wed Jan 11 17:06:55 1995  Stu Grossman  (grossman@cygnus.com)
2478
2479         * gdbtk.tcl:  Add button to control mixed source disassembly.
2480         Use text widgets in expr window.  The give me more control over
2481         layout.
2482         Add auto-updating of exprs in expression window.
2483         Handle expressions out of scope a bit better.
2484         Make selected window pop up to the top when invoked via the
2485         menubar.
2486         Make copyright message have raised relief.
2487
2488         * gdbtk.c (gdbtk_init):  Improve handling for errors in gdbtk.tcl
2489         during startup.
2490 end-sanitize-gdbtk
2491
2492 Wed Jan 11 17:53:26 1995  Rob Savoye  <rob@darkstar.cygnus.com>
2493
2494         * array-rom.c: Add support for most commands.
2495         
2496         * monitor.c: Add GDB remote protocol for the hybrid environment on
2497         the Array board. 
2498
2499 Wed Jan 11 00:44:01 1995  Jeff Law  (law@snake.cs.utah.edu)
2500
2501         * command.c (show_user_1): Use print_command_line to show a user
2502         defined command (including control structures).
2503
2504         * top.c (init_main): Change documentation for user defined
2505         commands to indicate they may accept up to ten arguments.
2506
2507 Tue Jan 10 16:22:41 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>
2508
2509         * mips-tdep.c (mips_skip_prologue): Accept or as well as addu for
2510         `move $s8, $sp' instruction.
2511
2512 Sun Jan  8 12:45:34 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
2513
2514         * target.c, target.h (target_signal_from_command): New function.
2515         * infrun.c (handle_command, signals_info), infcmd.c
2516         (signal_command): Use it.
2517         * infrun.c, infcmd.c: Update docstrings for these commands.
2518
2519         * target.h (enum target_signal), target.c (signals), target.c
2520         (target_signal_from_host, target_signal_to_host): Add
2521         TARGET_SIGNAL_REALTIME_* and TARGET_SIGNAL_PRIO for lynx.
2522         * config/tm-lynx.h: Define signal numbers for realtime events.
2523
2524 Sat Jan  7 07:23:53 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2525
2526         * dbxread.c (process_one_symbol):  Handle N_FUN symbols
2527         for Sun acc 3.0 under SunOS4.
2528
2529         Changes to improve handling of runtime common symbols
2530         under SunOS4.
2531         * minsyms.c (get_symbol_leading_char):  New routine to determine
2532         the leading symbol character for an objfile.
2533         (prim_record_minimal_symbol_and_info, install_minimal_symbols):
2534         Use it.
2535         * objfiles.h (rt_common_objfile):  New global, points to objfile
2536         containing the runtime common minimal symbols.
2537         * objfiles.c (free_objfile):  Mark rt_common_objfile as
2538         unallocated before freeing it.
2539         * solib.c (allocate_rt_common_objfile):  New routine to allocate
2540         an objfile for the runtime common minimal symbols.
2541         (solib_add_common_symbols):  Allocate an objfile for the runtime
2542         common symbols if necessary and put common symbols into it.
2543         Clean up code and comments.
2544         (solib_add, special_symbol_handling):  Cleanup comments regarding
2545         runtime common symbols.
2546         * stabsread.c (scan_file_globals_1):  New routine, contains
2547         old scan_file_globals code. Checks if there are any unresolved
2548         global symbols before starting the expensive minimal symbol table
2549         search.
2550         (scan_file_globals):  Now calls scan_file_globals_1 for the passed
2551         objfile and eventually for the runtime common objfile. Complains
2552         about any unresolved global symbols and removes them from the
2553         global symbol chain to avoid dangling pointers into the symbol
2554         table if the symbol table is reread.
2555
2556 Thu Jan  5 17:38:29 1995  Stu Grossman  (grossman@cygnus.com)
2557
2558         * Makefile.in (install_only uninstall):  Indent for clarity.
2559
2560         * core.c (dis_asm_read_memory):  Add call to
2561         dis_asm_read_memory_hook to provide alternate way for disassembler
2562         to read memory.
2563
2564         * defs.h:  Protect from multiple inclusion.  Add decl for
2565         dis_asm_read_memory_hook.
2566
2567         * top.c:  Make window startup be the default.
2568         * Add dis_asm_read_memory_hook.
2569
2570 start-sanitize-gdbtk
2571         * gdbtk.c (finish_saving_output):  Don't do anything if not saving
2572         output.
2573         * (breakpoint_notify):  Don't send null filename to tcl.
2574         * (gdb_eval):  New tcl command to eval an expression.
2575         * (gdb_disassemble):  New tcl command to do disassembly.  This
2576         allows tcl code to choose between exec file and target memeory,
2577         and can also do mixed source and assembly.
2578         * (gdbtk_init):  Move reading of gdbtk.tcl to the end to make sure
2579         that more of the environment is set up.  Also, create link between
2580         gdb and tcl vars disassemble{-_}from{-_}exec.
2581
2582         * gdbtk.tcl:  New expression window support.
2583         * Make assembly window be 80 columns wide.
2584         * Use new disassembly method.  Add menu items to select
2585         disassembly from exec file or target.
2586         * Change View menubar item to Options.
2587
2588         * Get rid of Stack, Breakpoints, Signals, and Variables Windows,
2589         since they don't exist yet.
2590
2591         * Pop up a copyright window on startup.
2592 end-sanitize-gdbtk
2593
2594 Thu Jan  5 01:16:40 1995  Jeff Law  (law@snake.cs.utah.edu)
2595
2596         * stabsread.c (define_symbol): Handle `a' symbol type used for
2597         reference parameter passed in a register.
2598
2599 start-sanitize-gdbtk
2600 Wed Jan  4 19:49:10 1995  Stan Shebs  <shebs@andros.cygnus.com>
2601
2602         * gdbtk.tcl (build_framework): Add standard commands menu, more
2603         windows to standard windows menu.
2604         (not_implemented_yet): Clarify message.
2605 end-sanitize-gdbtk
2606
2607 Wed Jan  4 12:27:29 1995  Kung Hsu  <kung@mexican.cygnus.com>
2608
2609         * defs.h: move include tm.h up, so that the type LONGEST can
2610         also based on the target requirement to determine. In this case
2611         target mips64.
2612
2613         * remote-os9k.c (rombug_open): catch exception e in rombug.
2614         * remote-os9k.c (rombug_wait): print message before register display
2615         from rombug.
2616
2617 Wed Jan  4 09:18:27 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
2618
2619         * top.c (locate_arg): Call strchr not index.
2620
2621 Tue Jan  3 16:52:03 1995  Per Bothner  <bothner@kalessin.cygnus.com>
2622
2623         * ch-exp.y (literal):  Recognize NULL.
2624         (tuple):  Parse simple unlabelled tuples.
2625         * eval.c (evaluate_subexp case OP_ARRAY):  Use expect_type to
2626         evaluate brace-initializer-expressions depending on context.
2627         (evaluate_subexp case UNOP_CAST):  Pass the target type as
2628         expected type when evaluating the expression.
2629
2630         * ch-typeprint.c (chill_type_print_base):  Get names of PTR and
2631         BOOL from TYPE_NAME.
2632         * ch-valprint.c (chill_print_type_scalar):  New function, to handle
2633         TYPE_CODE_RANGE better than print_type_scalar does.
2634         (chill_val_print_array_elements):  Use above new function.
2635
2636 Mon Jan  2 15:02:51 1995  Stan Shebs  <shebs@andros.cygnus.com>
2637
2638         * remote-udi.c (udi_load): Tell symbol_file_add that the
2639         program being loaded is the main program.
2640
2641 For older changes see ChangeLog-94
2642 \f
2643 Local Variables:
2644 mode: indented-text
2645 left-margin: 8
2646 fill-column: 74
2647 version-control: never
2648 End: