1 2009-03-26 Joel Brobecker <brobecker@adacore.com>
3 Recognize missing DW_AT_location as <value optimized out>.
5 (new_symbol <DW_TAG_variable> <!DW_AT_location> <!DW_AT_external>):
6 Call add_symbol_to_list.
8 2009-03-25 Tom Tromey <tromey@redhat.com>
10 * gdbtypes.h (CHECK_TYPEDEF): Don't yield a value.
11 * stack.c (print_this_frame_argument_p): Use check_typedef.
13 2009-03-25 Tom Tromey <tromey@redhat.com>
16 * acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
17 Rearrange flags setting. Add comments.
19 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
21 * config/i386/nm-i386.h: Remove code within
22 I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
23 * config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
25 * config/i386/nm-cygwin64.h: Ditto.
26 * config/i386/nm-fbsd.h: Ditto.
27 * config/i386/nm-go32.h: Ditto.
28 * config/i386/nm-linux.h: Ditto.
29 * config/i386/nm-linux64.h: Ditto.
31 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
33 ARI fix: "xasprintf" rule.
34 * printcmd.c (sym_info): Replace xasprintf by xstrprintf.
36 2009-03-25 Pedro Alves <pedro@codesourcery.com>
38 * remote.c (remote_start_remote): In non-stop mode, call
39 init_wait_for_inferior before adding threads and inferiors.
41 2009-03-25 Joel Brobecker <brobecker@adacore.com>
43 * breakpoint.c (breakpoint_thread_match): Split a large condition
44 into several smaller conditions. No behavior change.
46 2009-03-25 Pedro Alves <pedro@codesourcery.com>
48 * infrun.c (infrun_thread_thread_exit): New.
49 (_initialize_infrun): Attach it to the thread_exit observer.
50 * thread.c (delete_thread_1): Always call the observer, passing it
52 * mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
53 SILENT, return immediately.
55 2009-03-25 Pedro Alves <pedro@codesourcery.com>
57 * infrun.c (normal_stop): Use has_stack_frames instead of
59 * mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
60 when there is no thread selected.
61 (mi_cmd_execute): Don't special case commands that can run without
62 a valid selected thread.
63 * top.c (execute_command): Don't special case commands that can
64 run without a valid selected thread. Use has_stack_frames.
65 * infcmd.c (ensure_valid_thread): New.
66 (continue_1, step_1, jump_command, signal_command): Use it.
67 (detach_command): Error out if there's no selected thread/inferior.
68 * thread.c (print_thread_info): Allow having no thread selected.
69 (switch_to_thread): Don't read the PC if there is no current thread.
70 (do_restore_current_thread_cleanup): Don't record the current
71 frame if there is no current thread.
72 (make_cleanup_restore_current_thread): Don't read frame info if
73 there is no selected thread.
74 (_initialize_thread): Don't mark commands as
75 "no_selected_thread_ok".
76 * frame.c (get_current_frame): Error out if there is no valid
78 (has_stack_frames): Return false if there is no valid
80 * cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
81 "no_selected_thread_ok".
82 * cli/cli-decode.c (set_cmd_no_selected_thread_ok)
83 (get_cmd_no_selected_thread_ok): Delete.
84 * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
85 (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
87 * stack.c (get_selected_block): Use has_stack_frames.
89 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
91 Fix size of FPSCR in Power 7 processors.
92 * ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
93 (PPC_FEATURE_HAS_DFP): New #define.
94 (ppc_linux_read_description): Check for DFP feature instead of
95 ISA 2.05 to decide on size of the FPSCR.
97 2009-03-25 Kevin Buettner <kevinb@redhat.com>
99 * mn10300-tdep.c (trad-frame.h): Don't include.
100 (prologue-value.h): Include.
101 (mn10300_frame_unwind_cache, set_reg_offsets): Delete.
102 (struct mn10300_prologue): Define.
103 (push_reg, translate_rreg, check_for_saved): New functions.
104 (mn10300_analyze_prologue): Rewrite, using prologue-value
105 machinery. Handle more instructions than before. Permit
106 instructions to occur in any order.
107 (mn10300_skip_prologue): Find the extents of the function
108 in question; mn10300_analyze_prologue no longer does this.
109 (mn10300_analyze_frame_prologue): New function.
110 (mn10300_frame_base): New function.
111 (mn10300_frame_this_id): Rewrite, no longer using trad-frame
113 (mn10300_frame_prev_register): Likewise.
114 (mn10300_frame_base_address, mn10300_frame_base struct): Delete.
115 (mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
117 (mn10300_frame_unwind_init): Don't call frame_base_set_default().
119 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
121 Fix completer problem for filename completion on the first try.
123 * gdb/completer.h (gdb_completion_word_break_characters): New function.
124 * gdb/completer.c: Include gdb_assert.h.
125 (complete_line_internal_reason): New enum.
126 (complete_line_internal): Change last argument type to
127 complete_line_internal_reason.
128 Modify function to handle the different complete_line_internal_reason
130 (complete_line): Adapt to change in complete_line_internal.
131 (command_completer): Ditto.
132 (gdb_completion_word_break_characters): Implement new function.
133 * top.c (init_main): Set rl_completion_word_break_hook to
134 gdb_completion_word_break_characters.
137 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
139 ARI fix: "strlen d_name" rule.
140 * linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
143 2009-03-24 Tom Tromey <tromey@redhat.com>
144 Pedro Alves <pedro@codesourcery.com>
146 * configure, config.in: Rebuild.
147 * configure.ac: Check for libiconvlist.
148 * charset.c: Check HAVE_LIBICONVLIST.
149 * acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
150 LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
151 * Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
153 (INTERNAL_CFLAGS_BASE): Update.
154 (INTERNAL_LDFLAGS): Update.
157 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
159 * configure.ac: Initialize the variable $PREFER_CURSES.
160 * configure: Regenerated.
162 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
164 * configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
165 * configure: Regenerated.
167 2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
169 ARI fix: "strerror" rule.
170 * darwin-nat.c (darwin_ptrace): Use safe_strerror.
171 (darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
173 2009-03-23 Joel Brobecker <brobecker@adacore.com>
175 * ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
176 before looking up the fields inside our struct type.
178 2009-03-23 Joel Brobecker <brobecker@adacore.com>
180 * ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
181 trying to resolve the type qualification.
183 2009-03-23 Joel Brobecker <brobecker@adacore.com>
185 * ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
186 we try to apply the attribute on the real type, rather than
187 its associated typedef.
189 2009-03-23 Joel Brobecker <brobecker@adacore.com>
191 * ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
192 to make sure we try to get the modulus of the actual type, not the
195 2009-03-23 Joel Brobecker <brobecker@adacore.com>
197 * ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
198 [OP_ATR_LENGTH]: When using the attribute on a type, make sure
199 to get the real type, not the associated typedef.
201 2009-03-23 Joel Brobecker <brobecker@adacore.com>
203 * ada-lang.c (ada_get_field_index): Add handling of the case
204 when TYPE is a typedef of a struct.
206 2009-03-23 Joel Brobecker <brobecker@adacore.com>
208 Add gdb_usleep as a portable version of usleep based on gdb_select.
209 * gdb_usleep.h, gdb_usleep.c: New files.
210 * Makefile.in (SFILES): Add gdb_usleep.c.
211 (HFILES_NO_SRCDIR): Add gdb_usleep.h.
212 (COMMON_OBS): Add gdb_usleep.o.
213 * ser-unix.c (hardwire_send_break): Replace call to gdb_select
214 by call to gdb_usleep.
216 2009-03-23 Joel Brobecker <brobecker@adacore.com>
218 * buildsym.c (end_symtab): If we ignore the subfiles, then
219 unlink the associated symtabs if they were already allocated.
221 2009-03-23 Jerome Guitton <guitton@adacore.com>
223 Provide a way to force building of GDB with libcurses.
224 * configure.ac: Add --with-curses.
225 * configure: Regenerated.
227 2009-03-23 Tom Tromey <tromey@redhat.com>
229 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
232 2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
234 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
235 solib_contains_address_p instead of searching.
237 2009-03-23 Tom Tromey <tromey@redhat.com>
239 * charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
240 (iconv): Make 'inbuf' argument const.
241 (convert_between_encodings): Use ICONV_CONST.
242 (wchar_iterate): Likewise.
244 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
246 * windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
247 dynamically loaded function.
248 (LookupPrivilegeValueA): Ditto.
249 (OpenProcessToken): Ditto.
250 (AdjustTokenPrivileges): Rename and define placeholder for address of
251 dynamically loaded function.
252 (LookupPrivilegeValueA): Ditto.
253 (OpenProcessToken): Ditto.
254 (set_process_privilege): Remove check for loaded functions.
255 (bad_OpenProcessToken): Define.
256 (_initialize_loadable): Load token functions from advapi here, setting
257 OpenProcessToken function to a dummy static function which always return
258 error if OS doesn't support this functionality.
260 2009-03-22 Nicolas Roche <roche@adacore.com>
261 Christopher Faylor <me+cygwin@cgf.cx>
263 * win32-nat.c (ctrl_c_handler): New function.
264 (win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
265 is run in a separate console.
267 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
269 * windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
270 for dynamically loaded function.
271 (DebugBreakProcess): Ditto.
272 (DebugSetProcessKillOnExit): Ditto.
273 (EnumProcessModules): Ditto.
274 (GetModuleFileNameExA): Ditto.
275 (GetModuleInformation): Ditto.
276 (DebugActiveProcessStop): Rename and define placeholder for address of
277 dynamically loaded function.
278 (DebugBreakProcess): Ditto.
279 (DebugSetProcessKillOnExit): Ditto.
280 (EnumProcessModules): Ditto.
281 (GetModuleFileNameExA): Ditto.
282 (GetModuleInformation): Ditto.
283 (psapi_loaded): Delete.
284 (get_module_name): Don't check psapi_loaded, just rely on the fact that
285 dynamically loaded functions will return failure if they weren't
287 (has_detach_ability): Delete.
288 (windows_attach): Remove call to has_detach_ability (). Just rely on
289 functions being callable.
290 (bad_DebugActiveProcessStop): Define.
291 (bad_DebugBreakProcess): Ditto.
292 (bad_DebugSetProcessKillOnExit): Ditto.
293 (bad_EnumProcessModules): Ditto.
294 (bad_GetModuleFileNameExA): Ditto.
295 (bad_GetModuleInformation): Ditto.
296 (_initialize_loadable): Rename from _initialize_psapi. Initialize all
297 dynamic storage here, setting nonexistent functions to dummy static
298 functions which always return error.
300 2009-03-22 Pedro Alves <pedro@codesourcery.com>
302 * mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
303 to the about_to_proceed observer notification.
304 (mi_about_to_proceed): New.
305 (mi_on_resume): Only output ^running and the prompt here if the
306 target was proceeded.
307 * breakpoint.c (breakpoint_proceeded): New static.
308 (breakpoint_about_to_proceed): New.
309 (_initialize_breakpoints): Attach breakpoint_about_to_proceed to
310 the about_to_proceed observer notification.
311 * inferior.h (breakpoint_proceeded): Delete declaration.
312 * infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
313 Notify the about_to_proceed observers.
314 (struct inferior_status): Delete breakpoint_proceeded member.
315 (save_inferior_status): Don't save it.
316 (restore_inferior_status): Don't restore it.
317 * mi-main.h (mi_proceeded): Declare.
318 * mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
321 2009-03-22 Pedro Alves <pedro@codesourcery.com>
323 * gdbthread.h (struct thread_info): Add in_infcall member.
324 * infcall.c (run_inferior_call): Save, set and restore in_infcall.
325 Remove reverences to suppress_resume_observer. Refresh
326 `call_thread' after returning from `proceed'.
327 * infcmd.c (suppress_resume_observer): Delete.
328 * inferior.h (suppress_resume_observer): Delete declaration.
329 * mi/mi-interp.c (mi_on_resume): Suppress output while calling an
331 * thread.c (set_running): Remove references to
332 suppress_resume_observer.
333 * infrun.c (struct inferior_status): Add in_infcall member.
334 (save_inferior_status): Save it.
335 (restore_inferior_status): Restore it.
337 2009-03-22 Pedro Alves <pedro@codesourcery.com>
339 * infcall.c (run_inferior_call): Remove references to
340 suppress_stop_observer.
341 * infcmd.c (suppress_stop_observer): Delete.
342 (finish_command_continuation): Remove NOTE. Don't clear
343 suppress_stop_observer anymore.
344 (finish_command_continuation_free_arg): Likewise.
345 (finish_forward): Remove references to suppress_stop_observer.
346 Call normal_stop observer if we haven't already.
347 * inferior.h (suppress_stop_observer): Delete.
348 * infrun.c (normal_stop): When deciding to suppress the
349 normal_stop observer, check for proceed_to_finish instead of
350 suppress_stop_observer.
352 2009-03-22 Pedro Alves <pedro@codesourcery.com>
354 * symfile.c (symfile_relocate_debug_section): Remove check for
357 2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
358 Jim Blandy <jimb@red-bean.com>
359 Thiago Jung Bauermann <bauerman@br.ibm.com>
360 Tom Tromey <tromey@redhat.com>
362 Miscellaneous fixes to the Python code.
363 * python/python-cmd.c (cmdpy_init): Accept keyword
365 * python/python-value.c (valpy_string): Accept keyword
367 (valpy_binop): Use `break' to exit from the TRY_CATCH block.
368 Do not call value_to_value_object on NULL RES_VAL.
369 (value_object_methods): Change `string' entry to also accept
371 (convert_value_from_python): Return a copy of the value if obj is
373 (value_object_methods): Mark the `string' method as accepting
374 keywords, and show method "prototype" in the doc string.
375 * python/python.c (get_parameter): Don't return inside a
378 2009-03-20 Tom Tromey <tromey@redhat.com>
380 Add support for convenience functions in Python.
381 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
382 (SUBDIR_PYTHON_SRCS): Add python-function.c.
383 (python-function.o): New target.
384 * eval.c: Include "python/python.h" and <ctype.h>.
385 (evaluate_subexp_standard): Handle values of type
386 TYPE_CODE_INTERNAL_FUNCTION.
387 * gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
388 * parse.c (write_exp_string): Remove duplicate word in comment.
389 * python/python-function.c: New file.
390 * python/python-internal.h (gdbpy_initialize_functions): Add
392 * python/python.c (_initialize_python): Call
393 gdbpy_initialize_functions.
394 * valprint.c (value_check_printable): Handle values of type
395 TYPE_CODE_INTERNAL_FUNCTION.
396 * value.c: Include "cli/cli-decode.h".
397 (internal_function): New struct.
398 (functionlist, internal_fn_type): New static variables.
399 (lookup_only_internalvar,
400 lookup_internalvar): Add const qualifier to name argument.
401 (create_internalvar): Likewise. Initialize new field.
402 (set_internal_var): Fix typo in comment. Don't allow assignment
403 to canonical variable.
404 (value_create_internal_function, value_internal_function_name,
405 call_internal_function, function_command, function_destroyer,
406 add_internal_function): New functions.
407 (_initialize_values): Create `function' placeholder command.
408 Initialize internal_fn_type.
409 * value.h (lookup_only_internalvar, create_internalvar,
410 lookup_internalvar): Add const qualifier to name argument.
411 (internal_function_fn, add_internal_function, call_internal_function,
412 value_internal_function_name): Add prototypes.
413 (struct internalvar) <canonical>: New field.
415 2009-03-20 Tom Tromey <tromey@redhat.com>
417 * c-lang.c (evaluate_subexp_c): Call check_typedef.
419 2009-03-20 Tom Tromey <tromey@redhat.com>
420 Julian Brown <julian@codesourcery.com>
422 PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
423 PR i18n/9401, PR exp/9613:
425 * value.h (value_typed_string): Declare.
426 (val_print_string): Update.
427 * valprint.h (print_char_chars): Update.
428 * valprint.c (print_char_chars): Add type argument. Update.
429 (val_print_string): Likewise.
430 * valops.c (value_typed_string): New function.
431 * utils.c (host_char_to_target): New function.
432 (parse_escape): Use host_char_to_target, host_hex_value. Update.
434 (no_control_char_error): Remove.
435 * typeprint.c (print_type_scalar): Update.
436 * scm-valprint.c (scm_scmval_print): Update.
437 * scm-lang.h (scm_printchar, scm_printstr): Update.
438 * scm-lang.c (scm_printchar): Add type argument.
439 (scm_printstr): Likewise.
440 * printcmd.c (print_formatted): Update.
441 (print_scalar_formatted): Update.
442 (printf_command) <wide_string_arg, wide_char_arg>: New constants.
443 Handle '%lc' and '%ls'.
444 * parser-defs.h (struct typed_stoken): New type.
445 (struct stoken_vector): Likewise.
446 (write_exp_string_vector): Declare.
447 * parse.c (write_exp_string_vector): New function.
448 * p-valprint.c (pascal_val_print): Update.
449 * p-lang.h (is_pascal_string_type, pascal_printchar,
450 pascal_printstr): Update.
451 * p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
452 Add 'char_type' argument.
453 (pascal_emit_char): Add type argument.
454 (pascal_printchar): Likewise.
455 (pascal_printstr): Likewise.
456 * objc-lang.c (objc_emit_char): Add type argument.
457 (objc_printchar): Likewise.
458 (objc_printstr): Likewise.
459 * macroexp.c (get_character_constant): Handle unicode characters.
461 (get_string_literal): Handle unicode strings. Use
463 * m2-valprint.c (print_unpacked_pointer): Update.
464 (m2_print_array_contents): Update.
465 (m2_val_print): Update.
466 * m2-lang.c (m2_emit_char): Add type argument.
467 (m2_printchar): Likewise.
468 (m2_printstr): Likewise.
469 * language.h (struct language_defn) <la_printchar>: Add type
471 <la_printstr, la_emitchar>: Likewise.
472 (LA_PRINT_CHAR): Likewise.
473 (LA_PRINT_STRING): Likewise.
474 (LA_EMIT_CHAR): Likewise.
475 * language.c (unk_lang_emit_char): Add type argument.
476 (unk_lang_printchar): Likewise.
477 (unk_lang_printstr): Likewise.
478 * jv-valprint.c (java_val_print): Update.
479 * jv-lang.c (java_emit_char): Add type argument.
480 * f-valprint.c (f_val_print): Update.
481 * f-lang.c (f_emit_char): Add type argument.
482 (f_printchar): Likewise.
483 (f_printstr): Likewise.
484 * expprint.c (print_subexp_standard): Update.
485 * charset.h (target_wide_charset): Declare.
486 (c_target_char_has_backslash_escape, c_parse_backslash,
487 host_char_print_literally, host_char_to_target,
488 target_char_to_host, target_char_to_control_char): Remove.
489 (enum transliterations): New type.
490 (convert_between_encodings): Declare.
491 (HOST_ESCAPE_CHAR): New define.
492 (host_letter_to_control_character, host_hex_value): Declare.
493 (enum wchar_iterate_result): New enum.
494 (struct wchar_iterator): Declare.
495 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
496 wchar_push_back): Declare.
497 * charset-list.h: New file.
498 * c-valprint.c (textual_name): New function.
499 (textual_element_type): Handle wide character types.
500 (c_val_print): Pass original type to textual_element_type. Handle
501 wide character types.
502 (c_value_print): Use textual_element_type. Pass original type of
504 * c-lang.h (enum c_string_type): New type.
505 (c_printchar, c_printstr): Update.
506 * c-lang.c (classify_type): New function.
507 (print_wchar): Likewise.
508 (c_emit_char): Add type argument. Handle wide characters.
509 (c_printchar): Likewise.
510 (c_printstr): Add type argument. Handle wide and multibyte
512 (convert_ucn): New function.
513 (emit_numeric_character): Likewise.
514 (convert_octal): Likewise.
515 (convert_hex): Likewise.
516 (ADVANCE): New macro.
517 (convert_escape): New function.
518 (parse_one_string): Likewise.
519 (evaluate_subexp_c): Likewise.
520 (exp_descriptor_c): New global.
521 (c_language_defn): Use exp_descriptor_c.
522 (cplus_language_defn): Likewise.
523 (asm_language_defn): Likewise.
524 (minimal_language_defn): Likewise.
525 (charset_for_string_type): New function.
526 * c-exp.y (%union): Add 'svec' and 'tsval'.
528 (exp): Add CHAR production.
529 (string_exp): Rewrite.
530 (exp) <string_exp>: Rewrite.
531 (tempbuf): Now global.
532 (tempbuf_init): New global.
533 (parse_string_or_char): New function.
534 (yylex) <tempbuf>: Now global.
535 <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
537 Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
538 (c_parse_escape): New function.
539 * auxv.c (fprint_target_auxv): Update.
540 * ada-valprint.c (ada_emit_char): Add type argument.
541 (ada_printchar): Likewise.
542 (ada_print_scalar): Update.
543 (printstr): Add type argument. Update calls to ada_emit_char.
544 (ada_printstr): Add type argument.
545 (ada_val_print_array): Update.
546 (ada_val_print_1): Likewise.
547 * ada-lang.c (emit_char): Add type argument.
548 * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
550 * gdb_locale.h: Include langinfo.h.
551 * charset.c (_initialize_charset): Set default host charset from
552 the locale. Don't register charsets. Add target-wide-charset
553 commands. Call find_charset_names.
554 (struct charset, struct translation): Remove.
555 (GDB_DEFAULT_HOST_CHARSET): Remove.
556 (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
557 (target_wide_charset_name): New global.
558 (show_host_charset_name): Handle "auto".
559 (show_target_wide_charset_name): New function.
560 (host_charset_enum, target_charset_enum): Remove.
561 (charset_enum): New global.
562 (all_charsets, register_charset, lookup_charset, all_translations,
563 register_translation, lookup_translation): Remove.
564 (simple_charset, ascii_print_literally, ascii_to_control): Remove.
565 (iso_8859_print_literally, iso_8859_to_control,
566 iso_8859_family_charset): Remove.
567 (ebcdic_print_literally, ebcdic_to_control,
568 ebcdic_family_charset): Remove.
569 (struct cached_iconv, check_iconv_cache, cached_iconv_convert,
570 register_iconv_charsets): Remove.
571 (target_wide_charset_be_name, target_wide_charset_le_name): New
573 (identity_either_char_to_other): Remove.
574 (set_be_le_names, validate): New functions.
575 (backslashable, backslashed, represented): Remove.
576 (default_c_target_char_has_backslash_escape): Remove.
577 (default_c_parse_backslash, iconv_convert): Remove.
578 (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
579 ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
580 iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
581 ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
582 ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
583 ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
584 (table_convert_char, table_translation, simple_table_translation):
586 (current_host_charset, current_target_charset,
587 c_target_char_has_backslash_escape_func,
588 c_target_char_has_backslash_escape_baton): Remove.
589 (c_parse_backslash_func, c_parse_backslash_baton): Remove.
590 (host_char_to_target_func, host_char_to_target_baton): Remove.
591 (target_char_to_host_func, target_char_to_host_baton): Remove.
592 (cached_iconv_host_to_target, cached_iconv_target_to_host):
594 (lookup_charset_or_error, check_valid_host_charset): Remove.
595 (set_host_and_target_charsets): Remove.
596 (set_host_charset, set_target_charset): Remove.
597 (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
598 (set_target_wide_charset_sfunc): New function.
599 (show_charset): Print target wide character set.
600 (host_charset, target_charset): Rewrite.
601 (target_wide_charset): New function.
602 (c_target_char_has_backslash_escape): Remove.
603 (c_parse_backslash): Remove.
604 (host_letter_to_control_character): New function.
605 (host_char_print_literally): Remove.
606 (host_hex_value): New function.
607 (target_char_to_control_char): Remove.
608 (cleanup_iconv): New function.
609 (convert_between_encodings): New function.
610 (target_char_to_host): Remove.
611 (struct wchar_iterator): Define.
612 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
613 wchar_push_back): New functions.
614 (do_cleanup_iterator): New function.
615 (char_ptr): New typedef.
616 (charsets): New global.
617 (add_one, find_charset_names): New functions.
618 (default_charset_names): New global.
619 (auto_host_charset_name): Likewise.
620 * aclocal.m4, config.in, configure: Rebuild.
621 * configure.ac: Call AM_LANGINFO_CODESET.
622 (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
623 (AM_ICONV): Invoke earlier.
624 * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
625 LIBICONV_LIBDIR. Check for libiconv in build tree.
626 * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
627 (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
628 (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
629 * gdb_obstack.h (obstack_grow_wstr): New define.
630 * gdb_wchar.h: New file.
631 * defs.h: Include it.
633 2009-03-20 Tom Tromey <tromey@redhat.com>
634 Jan Kratochvil <jan.kratochvil@redhat.com>
636 * dwarf2read.c (process_die): Handle DW_TAG_typedef.
637 * eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
639 * ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
641 * ada-typeprint.c (print_array_type): Do the NULL check
644 2009-03-19 Tom Tromey <tromey@redhat.com>
646 * utils.c (do_obstack_free): New function.
647 (make_cleanup_obstack_free): Likewise.
648 * defs.h (make_cleanup_obstack_free): Declare.
650 2009-03-18 Doug Evans <dje@google.com>
652 * linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
653 int, not a long long.
654 (linux_nat_info_proc_cmd): Store pid in long instead of long long.
656 * expprint.c (dump_raw_expression): Print note if non-NULL.
658 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
661 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
663 * Makefile.in: Update license to GPLv3.
664 * ada-exp.y: Update license to GPLv3.
665 * ada-lex.l: Update license to GPLv3.
666 * c-exp.y: Update license to GPLv3.
667 * cp-name-parser.y: Update license to GPLv3.
668 * darwin-nat-info.c: Update license to GPLv3.
669 * f-exp.y: Update license to GPLv3.
670 * gdb_thread_db.h: Update license to GPLv3.
671 * hppanbsd-nat.c: Update license to GPLv3.
672 * hppanbsd-tdep.c: Update license to GPLv3.
673 * hppaobsd-tdep.c: Update license to GPLv3.
674 * jv-exp.y: Update license to GPLv3.
675 * m2-exp.y: Update license to GPLv3.
676 * objc-exp.y: Update license to GPLv3.
677 * p-exp.y: Update license to GPLv3.
678 * reply_mig_hack.awk: Update license to GPLv3.
679 * reverse.c: Update license to GPLv3.
680 * xtensa-xtregs.c: Update license to GPLv3.
682 2009-03-18 Pedro Alves <pedro@codesourcery.com>
684 * remote.c (remote_close): Don't call generic_mourn_inferior.
685 (remote_mourn_1): Call generic_mourn_inferior after closing the
688 2009-03-18 Pedro Alves <pedro@codesourcery.com>
690 * remote.c (remote_start_remote): Add missing call to
691 init_wait_for_inferior in non-stop mode.
693 2009-03-18 Pedro Alves <pedro@codesourcery.com>
695 * breakpoint.c (bpstat_should_step): Only consider software
696 watchpoints that have a location.
698 2009-03-17 Joel Brobecker <brobecker@adacore.com>
700 Add a target_ops parameter to the to_kill method in struct target_ops.
702 * target.h (struct target_ops): Add a "target_ops *" parameter to
704 (target_kill): Remove macro. Add declaration.
705 * target.c (debug_to_kill): Delete, no longer necessary.
706 (target_kill): New function.
707 (update_current_target): Stop inheriting the to_kill method.
708 Do not de_fault it to no_process either.
709 (setup_target_debug): Do not set current_target.to_kill.
710 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
711 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
712 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
715 2009-03-17 Doug Evans <dje@google.com>
717 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
718 glibc 2.3.2 and earlier.
720 2009-03-17 Joel Brobecker <brobecker@adacore.com>
722 * frame.c (get_prev_frame_1): Do not perform the inner_frame
723 sanity check if this_frame is not NORMAL.
724 (frame_id_inner): Update the description of this function.
726 2009-03-17 Hui Zhu <teawater@gmail.com>
728 * stack.c: Change the introduce of "disassemble-next-line".
730 2009-03-17 Pedro Alves <pedro@codesourcery.com>
732 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
735 2009-03-17 Hui Zhu <teawater@gmail.com>
737 * stack.c: Include valprint.h.
738 (disassemble_next_line): New enum.
739 (show_disassemble_next_line): New function. Show the current
740 value of disassemble-next-line.
741 (gdb_disassembly_stub_args): New struct for argument passing
742 between function do_gdb_disassembly and function
743 gdb_disassembly_stub.
744 (gdb_disassembly_stub): New function. Helper for
746 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
747 the exception from the gdb_disassembly because it will be
748 broken by filter sometime.
749 (print_frame_info): If disassemble-next-line is set to auto
750 or on and doesn't have the line debug messages for $pc,
751 output the next instruction.
752 If disassemble-next-line is set to on and there is line debug
753 messages, output assembly codes for next line.
754 (_initialize_stack): Make the "set disassemble-next-line"
755 command an auto-boolean command. Change its class to
756 class_stack. Place it in the top level set list. Extend help
757 to describe the auto mode.
759 2009-03-17 Pedro Alves <pedro@codesourcery.com>
761 * infrun.c (normal_stop): Don't overwrite old_chain.
763 2009-03-16 Joel Brobecker <brobecker@adacore.com>
765 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
766 which is undefined, by call to regcache_invalidate, which should
767 do what the original author wanted to do.
769 2009-03-16 Joel Brobecker <brobecker@adacore.com>
771 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
772 (mips_create_inferior): Likewise.
774 2009-03-16 Joel Brobecker <brobecker@adacore.com>
776 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
778 2009-03-16 Joel Brobecker <brobecker@adacore.com>
780 * darwin-nat.c (darwin_resume): Fix a compiler warning when
781 building on x86_64-darwin.
783 2009-03-16 Tristan Gingold <gingold@adacore.com>
785 * configure.tgt: Add handling for x86_64-darwin.
787 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
789 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
791 2009-03-15 Joel Brobecker <brobecker@adacore.com>
793 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
794 Use the ops parameter to get to the target beneath, rather than
795 using the current_target global. Using the current_target global
796 was an unintended accident.
798 2009-03-15 Joel Brobecker <brobecker@adacore.com>
800 Fix an error happening while loading symbols from a core file
803 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
804 to detect whether we're debugging a core file or not.
806 2009-03-15 Joel Brobecker <brobecker@adacore.com>
808 Modernize the aix-thread later by getting rid of the base_target
809 global. This brings back to life the AIX port which was otherwise
810 crashing all the time.
812 * aix-thread.c (base_target): Delete.
813 (pd_enable): Do not set base_target.
814 (aix_thread_attach): Use find_target_beneath instead of base_target.
815 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
816 (aix_thread_fetch_registers, aix_thread_store_registers),
817 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
818 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
819 (aix_thread_kill): Delete. Does not seem necessary.
820 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
822 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
824 * stack.c (return_command <retval_exp>): New variables retval_expr
825 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
826 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
827 if RETURN_TYPE is NULL.
830 2009-03-14 Pedro Alves <pedro@codesourcery.com>
832 * remote.c (PACKET_qAttached): New.
833 (remote_query_attached): New.
834 (remote_add_inferior): Add new `attached' argument. Handle it.
835 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
836 -1 to remote_add_inferior in new parameter.
837 (extended_remote_attach_1): Adjust to pass 1 to
838 remote_add_inferior in the new parameter.
839 (extended_remote_create_inferior_1): Adjust to pass 0 to
840 remote_add_inferior in the new parameter.
841 (_initialize_remote): Add "set/show remote query-attached-packet"
844 2009-03-13 Tom Tromey <tromey@redhat.com>
846 * symtab.c (lookup_symbol_in_language): Use a cleanup.
848 2009-03-13 Doug Evans <dje@google.com>
850 * exceptions.h: Clean up some comments on catch_exceptions usage.
851 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
854 2009-02-17 Joel Brobecker <brobecker@adacore.com>
856 The following patch helps getting rid of a warning inside solib-som.c.
858 * source.c (source_full_path_of): Constify parameter filename.
859 * defs.h (source_full_path_of): Update declaration accordingly.
861 2009-03-12 Joel Brobecker <brobecker@adacore.com>
863 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
864 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
865 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
867 2009-03-12 Joel Brobecker <brobecker@adacore.com>
869 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
870 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
872 2009-03-12 Joel Brobecker <brobecker@adacore.com>
874 * ada-tasks.c (ada_task_is_alive): Move up and make static.
875 * ada-lang.h (ada_task_is_alive): Remove declaration.
877 2009-03-12 Jerome Guitton <guitton@adacore.com>
879 * ada-lang.c (ada_delta): Change the type of numerators and
880 denominators to DOUBLEST, as they may not fit into a long.
881 (scaling_factor): Ditto.
883 2009-03-12 Jerome Guitton <guitton@adacore.com>
885 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
887 2009-03-12 Joel Brobecker <brobecker@adacore.com>
889 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
890 types, if we are unable to determine the actual symbol type
891 from its tag, then use the static approximation instead.
893 2009-03-12 Joel Brobecker <brobecker@adacore.com>
895 Fix crash printing packed record with packed array.
897 * ada-lang.c (ada_modulus_from_name): New function.
898 (ada_modulus): In the case where the type length is bigger than
899 the size of the type used to hold the bounds, try determining
900 the modulus from the type name.
901 (ada_value_primitive_packed_val): Fix bug in the computation of
902 ntarg causing an out-of-buffer invalid access.
904 2009-03-12 Joel Brobecker <brobecker@adacore.com>
906 Fix segfault when printing short_integer'last.
908 * ada-lang.c (ada_find_any_type): Search in the primitive types
909 if a symbol could not be found.
911 2009-03-12 Joel Brobecker <brobecker@adacore.com>
913 * ada-tasks.c (task_states,long_task_states): Add new states
914 Activating and Acceptor_Delay_Sleep. Update the description
915 of state Acceptor_Sleep.
917 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
919 Fix a build failure on Darwin following some changes in
920 the profile of some target_ops methods.
922 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
924 (darwin_stop_inferior, darwin_detach): Likewise.
926 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
928 Include token in ^running notification for CLI commands.
930 * mi/mi-main.c (mi_execute_command): Set current_token here.
931 (mi_cmd_execute): Do not set current_token here.
933 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
937 * mi/mi-main.c (mi_print_timing_maybe): New.
938 (captured_mi_execute_command): Simplify. Output timings to
940 (mi_execute_async_cli_command): Do not print timings.
941 * mi/mi-main.h (mi_print_timing_maybe): Declare.
942 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
944 2009-03-12 Jerome Guitton <guitton@adacore.com>
946 * xcoffread.c (process_linenos): Check if the line in the
947 include table refers to the main source file and, if so,
948 add them to the main subfile.
950 2009-03-12 Joel Brobecker <brobecker@adacore.com>
952 Fix a build failure on AIX introduced after a change in the profile
953 of some of the "methods" in the target_ops structure.
954 * aix-thread.c: Add missing target_ops parameter throughout.
956 Implement Ada task switching on AIX.
957 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
958 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
960 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
962 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
963 value_mark and value_free_to_mark.
964 * objfiles.c (free_objfile): Call objfile_free_data before
967 2009-03-10 Hui Zhu <teawater@gmail.com>
969 * disasm.c (gdb_disassembly): Remove unused argument
971 * disasm.h (gdb_disassembly): Ditto.
972 * cli/cli-cmds.c (print_disassembly): Ditto.
973 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
975 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
977 * solib.c (solib_contains_address_p): New function.
978 (solib_name_from_address): Use it.
979 * printcmd.c (display_uses_solib_p): Use it.
980 * solib.h (solib_contains_address_p): Declare it.
982 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
984 * varobj.c (free_variable): Call value_free.
986 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
989 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
990 Move the variable `macinfo_type' out of the loop. Create a new
991 processing pass before the current one to pre-create `current_file'.
992 New complaint on misplaced zero/non-zero definitions/includes.
993 Skip first DW_MACINFO_start_file with `at_commandline' set.
995 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
997 * solib.c (reload_shared_libraries): Give
998 inferior a chance to reset solib breakpoint.
1001 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
1003 * windows-nat.c (dr): Redefine to use largest possible integer which
1005 (cygwin_set_dr): Avoid coercion.
1007 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
1009 * windows-nat.c (windows_create_inferior): Implement --tty handling on
1012 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
1014 Rename solib_address to solib_name_from_address.
1015 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
1016 (disable_breakpoints_in_unloaded_shlib): Update.
1017 * printcmd.c (display_uses_solib_p): Likewise.
1018 * stack.c (print_frame): Likewise.
1022 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
1024 * printcmd.c (do_one_display): Reparse exp_string.
1025 (display_uses_solib_p): New function.
1026 (clear_dangling_display_expressions): New function.
1027 (_initialize_printcmd): Add observer.
1028 * solib.c (no_shared_libraries): Swap order of calls to
1029 clear_solib and objfile_purge_solibs.
1031 2009-03-05 Joel Brobecker <brobecker@adacore.com>
1033 Implement the target-specific part of Ada tasking support
1036 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
1037 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
1039 2009-03-05 Joel Brobecker <brobecker@adacore.com>
1041 Get rid of the global "base_target" and use "find_target_beneath"
1042 to find the underlying target.
1043 * dec-thread.c (base_target): Delete.
1044 (enable_dec_thread): Remove assignement to base_target.
1045 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
1046 (dec_thread_fetch_registers, dec_thread_store_registers)
1047 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
1048 Update the function profile if necessary.
1049 Use find_target_beneath to call the same method but from
1050 the underlying target, removing the need for "base_target".
1052 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
1053 Fix a copy/paste error in a few debug traces...
1055 * solib-osf.c (init_so): Use a simpler method for computing
1056 the size of lm_info structure. This also gets rid of warning
1057 emitted by the compiler.
1059 2009-03-05 Pedro Alves <pedro@codesourcery.com>
1061 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
1062 duplicates of permanent breakpoints.
1064 2009-03-04 Pedro Alves <pedro@codesourcery.com>
1066 * inferior.h (notice_new_inferior): Declare.
1067 * infcmd.c (notice_new_inferior): New.
1068 * remote.c (remote_add_inferior, remote_add_thread): New.
1069 (notice_new_inferiors): Rename to...
1070 (remote_notice_new_inferior): ... this. Add RUNNING argument.
1071 Use remote_add_thread instead of add_thread, passing it the
1072 RUNNING argument. Add an inferior with remote_add_inferior. If
1073 we just learned about an inferior, call notice_new_inferior.
1074 (record_currthread): Adjust.
1075 (remote_threads_info): Adjust to use remote_notice_new_inferior.
1076 (remote_start_remote, extended_remote_attach_1): Use
1077 remote_add_inferior.
1078 (process_stop_reply): Adjust. Call remote_notice_new_inferior
1079 after handling expedited registers and watchpoint state.
1080 (extended_remote_create_inferior_1): Use remote_add_inferior.
1082 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
1084 * infcmd.c (registers_info): Remove register number case.
1086 2009-03-03 Pedro Alves <pedro@codesourcery.com>
1088 * top.c (quit_target): Check for target_has_execution before
1089 killing or detaching from inferiors.
1091 2009-03-02 Joel Brobecker <brobecker@adacore.com>
1093 Remove some unused routines.
1095 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
1097 * ada-lang.c (ada_task_list_iterator_ftype)
1098 (iterate_over_live_ada_tasks): Delete.
1099 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
1102 2009-03-01 Doug Evans <dje@google.com>
1104 * symtab.c: Remove trailing whitespace throughout the file.
1105 (expand_line_sal): Fix some typos and whitespace.
1107 * Makefile.in (clean): rm -f $(DEPDIR)/*.
1109 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
1110 (init.c): signals/ -> common/.
1111 (signals.o): Update.
1112 * target.h (target_signal_to_string,target_signal_to_string)
1113 (target_signal_from_name,target_signal_to_host_p)
1114 (target_signal_from_host,target_signal_to_host): Move to ...
1115 * common/gdb_signals.h: ... here. New file.
1116 * common/signals.c: Moved here from signals/signals.c.
1117 #include gdb_signals.h, remove #include of target.h in gdb case.
1118 (target_signal_from_command,default_target_signal_to_host)
1119 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
1121 Include thread ID in target_wait debugging output.
1122 * infrun.c (print_target_wait_results): New function.
1123 (wait_for_inferior,fetch_inferior_event): Call it.
1125 2009-02-27 Pedro Alves <pedro@codesourcery.com>
1127 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
1128 with a ptid_t field.
1129 * linux-thread-db.c (thread_get_info_callback): Build the ptid
1130 using the pid stored in proc_handle.ptid.
1131 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
1132 (check_for_thread_db, thread_db_detach, check_event)
1133 (thread_db_mourn_inferior, find_new_threads_callback)
1134 (thread_db_find_new_threads_1): Adjust.
1135 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
1136 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
1138 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
1140 * valprint.c (read_string): Rework clean-up logic. Use
1141 free_current_contents to clean-up buffer.
1143 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
1145 * MAINTAINERS: Update e-mail address.
1147 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
1149 * python/python-utils.c (python_string_to_unicode): Always return
1151 (python_string_to_target_string): Decrement transient python
1153 (python_string_to_host_string): Likewise.
1155 2007-02-26 Pedro Alves <pedro@codesourcery.com>
1157 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
1158 call to super_fetch_registers.
1159 (mips64_linux_store_registers): Pass `ops' to call to
1160 super_store_registers.
1162 2009-02-25 Doug Evans <dje@google.com>
1164 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
1167 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
1168 disabled_shlib_breaks, unused.
1170 * printcmd.c (build_address_symbolic): Fix comment.
1172 2009-02-25 Hui Zhu <teawater@gmail.com>
1174 * cli/cli-script.c (define_command): Add _() to query.
1175 * gnu-nat.c (inf_validate_task_sc): Ditto.
1176 * infcmd.c (kill_if_already_running): Ditto.
1177 (jump_command): Ditto.
1178 (attach_command): Ditto.
1179 * inflow.c (kill_command): Ditto.
1180 * infrun.c (handle_command): Ditto.
1181 * maint.c (maintenance_dump_me): Ditto.
1182 * memattr.c (mem_delete_command): Ditto.
1183 * monitor.c (monitor_interrupt_query): Ditto.
1184 * nto-procfs.c (interrupt_query): Ditto.
1185 * printcmd.c (undisplay_command): Ditto.
1186 * remote-mips.c (mips_kill): Ditto.
1187 * remote.c (interrupt_query): Ditto.
1188 * solib-irix.c (irix_open_symbol_file_object): Ditto.
1189 * solib-osf.c (osf_open_symbol_file_object): Ditto.
1190 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
1191 * solib-som.c (som_open_symbol_file_object): Ditto.
1192 * solib-svr4.c (open_symbol_file_object): Ditto.
1193 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
1194 * target.c (kill_or_be_killed): Ditto.
1195 * tracepoint.c (delete_trace_command): Ditto.
1196 * top.c (quit_confirm): Add _() to s that will be used
1199 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
1201 Fix windows-nat.c compilation failure.
1203 * windows-nat.c (windows_thread_alive): Fix forward declaration.
1204 (get_windows_debug_event): Add ops parameter to call to windows_resume.
1206 2009-02-23 Pedro Alves <pedro@codesourcery.com>
1208 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
1210 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
1212 * symtab.c (find_line_symtab): Initialize exact to avoid
1215 2009-02-23 Pedro Alves <pedro@codesourcery.com>
1217 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
1218 `ops' to recursive call.
1220 2009-02-23 Pedro Alves <pedro@codesourcery.com>
1222 * corelow.c (get_core_registers): Adjust.
1223 (core_file_thread_alive): Rename to...
1224 (core_thread_alive): ... this.
1225 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
1226 (init_core_ops): Adjust.
1227 (coreops_suppress_target): Delete.
1228 (_initialize_corelow): Unconditionally add core_ops.
1229 * procfs.c: Include "inf-child.h".
1230 (procfs_ops): Delete.
1231 (init_procfs_ops): Delete. Reimplement as...
1232 (procfs_target): ... this, inheriting from inf-child.
1233 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
1234 (procfs_prepare_to_store): Delete.
1235 (procfs_store_registers, procfs_resume): Adjust.
1236 (procfs_open): Delete.
1237 (procfs_suppress_run): Delete.
1238 (procfs_can_run): Delete.
1239 (procfs_mourn_inferior): Adjust.
1240 (procfs_init_inferior): Add target_ops parameter. Adjust.
1241 (procfs_create_inferior): Don't pass procfs_init_inferior to
1242 fork_inferior. Instead call it after fork_inferior returns.
1243 (procfs_find_new_threads): Adjust.
1244 (_initialize_procfs): Adjust to use procfs_target instead of
1246 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
1247 (lwp_to_thread): Use target_thread_alive.
1248 (sol_thread_open): Delete.
1249 (sol_thread_attach): Delete.
1250 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
1251 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
1252 to use find_target_beneath.
1253 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
1254 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
1255 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
1256 (check_for_thread_db): New.
1257 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
1258 (sol_thread_new_objfile): Call check_for_thread_db.
1259 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
1260 (sol_thread_can_run): Delete.
1261 (sol_thread_alive): Adjust to use find_target_beneath.
1262 (sol_thread_stop): Delete.
1263 (rw_common): Use target_write_memory or target_read_memory.
1264 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
1265 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
1266 (solaris_pid_to_str): Remove check for libthread_db initialization
1268 (sol_find_new_threads): Remove check for libthread_db
1269 initialization failing, or for an invalid inferior_ptid. Adjust
1270 to use find_target_beneath.
1271 (sol_core_open, sol_core_close, sol_core_detach,
1272 sol_core_files_info, sol_find_memory_regions,
1273 sol_make_note_section, ignore): Delete.
1274 (init_sol_thread_ops): Make it a thread_stratum target. Remove
1275 unneeded callback settings.
1276 (init_sol_core_ops): Delete.
1277 (_initialize_sol_thread): No longer call init_sol_core_ops, set
1278 procfs_suppress_run, or hack with core_ops.
1280 * target.h (struct target_ops): Add a target_ops * parameter to
1281 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
1282 and to_find_new_threads.
1283 (target_fetch_registers, target_store_registers)
1284 (target_thread_alive, target_find_new_threads): Redeclare as
1287 * target.c (update_current_target): Do not inherit or de_fault
1288 to_resume, to_fetch_registers, to_store_registers,
1289 to_thread_alive, to_find_new_threads.
1290 (target_resume): Adjust.
1291 (target_thread_alive, target_find_new_threads): New.
1292 (debug_to_resume, debug_to_fetch_registers): Delete.
1293 (target_fetch_registers): New.
1294 (debug_to_store_registers): Delete.
1295 (target_store_registers): New.
1296 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
1297 (setup_target_debug): Adjust.
1299 * gdbcore.h (core_ops): Delete declaration.
1301 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
1302 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
1303 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
1304 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
1305 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
1306 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
1307 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
1308 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
1309 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
1310 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
1311 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
1312 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
1313 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
1314 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
1316 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
1317 * gdbarch.h, gdbarch.c: Regenerate.
1319 * sol2-tdep.c: Include "inferior.h".
1320 (sol2_core_pid_to_str): New.
1321 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
1323 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
1324 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
1325 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
1326 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
1328 2009-02-22 Doug Evans <dje@google.com>
1330 * exec.c (exec_file_attach): Fix comment.
1332 2009-02-22 Pedro Alves <pedro@codesourcery.com>
1334 Silence a few -Wmissing-prototypes warnings.
1337 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
1339 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
1340 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
1341 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
1342 (_initialize_amd64nbsd_tdep): ... this.
1343 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
1344 (_initialize_arm_linux_tdep): Declare.
1345 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
1346 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
1347 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
1348 * avr-tdep.c (avr_return_value): Make it static.
1349 (avr_frame_unwind_cache): Ditto.
1350 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
1351 (bsd_uthread_solib_loaded): Ditto.
1352 (bsd_uthread_solib_unloaded): Ditto.
1353 (bsd_uthread_target): Ditto.
1354 (_initialize_bsd_uthread): Declare.
1355 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
1356 (cris_frame_unwind_cache): Ditto.
1357 * frv-tdep.c (frv_return_value): Ditto.
1358 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
1359 (h8300h_use_struct_convention): Ditto.
1360 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
1362 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
1364 * hppabsd-tdep.c: Include hppabsd-tdep.h.
1365 (hppabsd_find_global_pointer): Make it static.
1366 * hppabsd-tdep.h: New.
1367 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
1368 (hppabsd_init_abi): Remove declaration.
1369 (_initialize_hppabsd_tdep): Remove declaration.
1370 (_initialize_hppanbsd_tdep): Declare.
1371 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
1372 (hppabsd_init_abi): Delete declaration.
1373 (hppaobsd_init_abi): Make it static.
1374 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
1375 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
1376 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
1377 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
1378 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
1379 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
1380 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
1381 (_initialize_m32c_tdep): Declare.
1382 * m32r-rom.c (_initialize_m32r_rom): Declare.
1383 * m32r-tdep.c (m32r_skip_prologue): Make it static.
1384 (m32r_return_value): Ditto.
1385 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
1386 (m68hc11_return_value): Ditto.
1387 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
1388 * m88k-tdep.c (m88k_frame_cache): Make it static.
1389 * mep-tdep.c (mep_gdb_print_insn): Ditto.
1390 (mep_return_value): Ditto.
1391 (_initialize_mep_tdep): Declare.
1392 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
1393 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
1394 (mips_linux_syscall_next_pc): Ditto.
1395 (_initialize_mips_linux_tdep): Declare.
1396 * mips-tdep.c (mips_single_step_through_delay): Make it static.
1397 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
1398 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
1399 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
1400 * mt-tdep.c (_initialize_mt_tdep): Declare.
1401 * nbsd-tdep.c: Include nbsd-tdep.h.
1402 * nto-tdep.c (find_load_phdr): Make it static.
1403 (_initialize_nto_tdep): Declare.
1404 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
1406 (_initialize_ppc_linux_tdep): Declare.
1407 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
1408 (m32r_insert_watchpoint, m32r_remove_watchpoint)
1409 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
1411 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
1412 * rs6000-nat.c: Include xcoffread.h.
1413 (find_toc_address): Don't extern declare get_toc_offset. Adjust
1414 to call xcoff_get_to_offset.
1415 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
1416 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
1417 (rs6000_skip_trampoline_code): Make static.
1418 * s390-tdep.c (s390_regset_from_core_section): Ditto.
1419 * sh-tdep.c (sh_register_reggroup_p): Ditto.
1420 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
1421 (_initialize_shnbsd_tdep): Declare.
1422 * solib-frv.c (displacement_from_map): Make static.
1423 (_initialize_frv_solib): Declare.
1424 * solib-irix.c (fetch_lm_info): Make static.
1425 (_initialize_irix_solib): Declare.
1426 * solib-som.c: Include solib-som.h.
1427 (som_solib_select): Line break.
1428 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
1429 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
1430 (_initialize_sparcnbsd_tdep): ... this.
1431 * spu-tdep.c (spu_software_single_step): Make it static.
1432 (_initialize_spu_tdep): Declare.
1433 * vax-tdep.c (vax_frame_cache): Make it static.
1434 * xcoffread.c: Include xcoffread.h.
1435 (get_toc_offset): Rename to ...
1436 (xcoff_get_toc_offset): ... this.
1437 (_initialize_xcoffread): Declare.
1439 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
1440 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
1442 (_initialize_xtensa_tdep): Declare.
1444 2008-02-21 Pedro Alves <pedro@codesorcery.com>
1446 Silence a few -Wmissing-prototypes warnings.
1449 * amd64-nat.c: Include "amd64-nat.h".
1450 * fork-child.c (_initialize_fork_child): Ditto.
1451 * gcore.c (_initialize_gcore): Ditto.
1452 * inf-ptrace.c: Include "inf-ptrace.h".
1453 (inf_ptrace_store_registers): Make it static.
1454 * linux-nat.c (linux_nat_terminal_ours): Make it static.
1455 (_initialize_linux_nat): Declare before definition.
1456 * linux-tdep.c: Include "linux-tdep.h".
1457 * linux-thread-db.c (_initialize_thread_db): Declare before
1459 * proc-service.c (_initialize_proc_service): Ditto.
1460 * remote.c (remote_send_printf): Make it static.
1461 * solib.c: Include "solib.h".
1462 * symfile-mem.c (_initialize_symfile_mem): Declare before
1464 * ada-lang.c (ada_la_decode, ada_match_name)
1465 (ada_suppress_symbol_printing, ada_is_array_type)
1466 (ada_value_ptr_subscript, ada_array_length)
1467 (ada_to_static_fixed_value): Make them static.
1468 (_initialize_ada_language): Declare before definition.
1469 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
1470 (ada_task_list_changed, ada_new_objfile_observer): Make them
1472 (_initialize_tasks): Declare before definition.
1473 * addrmap.c (_initialize_addrmap): Declare before definition.
1474 * auxv.c (default_auxv_parse): Make it static.
1475 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
1477 * breakpoint.c (remove_sal): Add line break.
1478 (expand_line_sal_maybe): Make it static.
1479 * cp-name-parser.y: Include "cp-support.h".
1480 * cp-valprint.c (cp_find_class_member): Make it static.
1481 * eval.c (value_f90_subarray): Ditto.
1482 * exceptions.c (print_any_exception): Ditto.
1483 * findcmd.c (_initialize_mem_search): Declare before definition.
1484 * frame.c (frame_observer_target_changed): Make it static.
1485 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
1486 * inf-child.c: Include "inf-child.h".
1487 * inferior.h (valid_inferior_id): Rename to ...
1488 (valid_gdb_inferior_id): ... this.
1489 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
1491 * jv-lang.c (java_language_arch_info): Make it static.
1492 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
1493 * osdata.c (info_osdata_command): Make it static.
1494 * regcache.c (regcache_observer_target_changed): Make it static.
1495 * reverse.c (_initialize_reverse): Declare before definition.
1496 * stabsread.c (cleanup_undefined_types_noname)
1497 (cleanup_undefined_types_1): Make them static.
1498 * symfile.c (place_section): Make it static.
1499 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
1500 * target-descriptions.c (_initialize_target_descriptions): Declare
1502 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
1503 (find_default_is_async_p, find_default_supports_non_stop): Make
1505 (target_supports_non_stop): Add prototype.
1506 (dummy_pid_to_str): Make it static.
1507 * utils.c (_initialize_utils): Declare before definition.
1508 * ada-exp.y (_initialize_ada_exp): Declare before definition.
1509 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
1510 * target.h (struct target_ops): Add a prototype to the
1511 to_can_execute_reverse callback.
1512 * macroscope.c (_initialize_macroscope): Declare before definition.
1513 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
1514 * python/python.c (_initialize_python): Declare before definition.
1515 * tui/tui-command.c: Include "tui/tui-command.h".
1516 * tui/tui-data.c (init_content_element, init_win_info): Make them
1518 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
1519 * tui/tui-interp.c (_initialize_tui_interp): Declare before
1521 * tui/tui-layout.c: Include "tui/tui-layout.h".
1522 (_initialize_tui_layout): Declare before definition.
1523 * tui/tui-regs.c: Include "tui/tui-regs.h".
1524 (tui_display_reg_element_at_line): Make it static.
1525 (_initialize_tui_regs): Declare before definition.
1526 * tui/tui-stack.c (_initialize_tui_stack): Declare before
1528 * tui/tui-win.c: Include "tui/tui-win.h".
1529 (_initialize_tui_win): Declare before definition.
1530 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
1531 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
1532 (tui_get_cmd_list): Add a prototype.
1533 * tui/tui-windata.c: Include tui-windata.h.
1534 * tui/tui-wingeneral.c (box_win): Make it static.
1535 * cli/cli-logging.c (show_logging_command): Make it static.
1536 (_initialize_cli_logging): Declare before definition.
1537 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
1540 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
1542 Extend use of i386_use_watchpoints to all i386 native files
1543 using hardware watchpoints.
1544 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
1545 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
1546 * windows-nat.c (init_windows_ops): Ditto.
1547 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
1548 * config/i386/nm-cygwin64.h: Ditto.
1549 * config/i386/nm-fbsd.h: Ditto.
1550 * config/i386/nm-go32.h: Ditto.
1552 2009-02-19 Joel Brobecker <brobecker@adacore.com>
1554 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
1556 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
1558 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
1559 (mi_interpreter_init): Register the above.
1560 * solib.c (clear_solib): Notify solib unload.
1561 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
1562 disable breakpoints on a.out targets.
1564 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
1566 * observer.c (observer_test_first_notification_function)
1567 (observer_test_second_notification_function)
1568 (observer_test_third_notification_function): Adjust prototype.
1570 2009-02-17 Pedro Alves <pedro@codesourcery.com>
1572 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
1573 (ALL_TARGET_OBS): Add dicos-tdep.o.
1574 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
1575 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
1577 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
1579 * dicos-tdep.h, dicos-tdep.c: New.
1580 * amd64-dicos-tdep.c: New.
1581 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
1582 inferior.h. Include dicos-tdep.h.
1583 (i386_dicos_init_abi): Call dicos_init_abi.
1584 (i386_dicos_bfd_has_symbol_p): Delete.
1585 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
1587 * NEWS: Mention x86-64 DICOS target support.
1589 2009-02-16 Doug Evans <dje@google.com>
1591 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
1592 All callers updated.
1593 (amd64_get_insn_details): Handle more 3-byte opcode insns.
1594 (amd64_breakpoint_p): Delete.
1595 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
1596 don't back up pc to the start of the int3.
1597 * i386-tdep.c: #include opcode/i386.h.
1598 (i386_skip_prefixes): New function.
1599 (i386_absolute_jmp_p): Constify argument.
1600 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
1601 (i386_breakpoint_p): Delete.
1602 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
1603 When fixing up after stepping an int3, don't back up pc to the start
1606 2009-02-16 Pedro Alves <pedro@codesourcery.com>
1608 * corelow.c (core_close): Don't hardcode the core's pid.
1609 (core_open): Find core threads before calling
1610 post_create_inferior.
1611 (add_to_thread_list, get_core_register_section): Take into account
1612 systems where the regset section names encode the pid of the
1615 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
1616 * gdbarch.h, gdbarch.c: Regenerate.
1618 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
1619 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
1620 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
1621 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
1623 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
1625 Include frame information for *stopped due to CLI commands.
1627 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
1628 * infcmd.c (finish_command_continuation): Pass '1' for
1629 'print_frame' parameter to the observer.
1630 * infrun.c (normal_stop): Don't print mi-specific information
1631 here. Pass 'stop_print_frame' to the 'print_frame' parameter
1633 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
1634 If we need to print frame, and current uiout is not the MI one,
1637 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
1639 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
1640 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
1642 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
1645 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
1646 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
1648 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
1650 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
1651 for DW_ATE_signed_char and DW_ATE_unsigned_char
1652 for pascal language.
1654 2009-02-11 Jim Meyering <meyering@redhat.com>
1655 Jan Kratochvil <jan.kratochvil@redhat.com>
1657 Avoid NULL dereference.
1658 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
1659 New variable func_type.
1661 2009-02-11 Pedro Alves <pedro@codesourcery.com>
1663 * gdbarch.c: Regenerate.
1665 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
1667 * p-lang.c (is_pascal_string_type): Fix comment.
1668 Determine exact size of char elements for GPC
1670 (pascal_printstr): Handle char width of 2 or 4.
1671 * p-valprint.c (pascal_val_print): Handle char
1674 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
1676 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
1677 inside the loop. Only call addrmap_set_empty if the compilation unit
1678 had DW_AT_high_pc and DW_AT_low_pc. Update call to
1679 scan_partial_symbols.
1680 (scan_partial_symbols): Take NEED_PC argument and pass it along with
1682 (add_partial_namespace): Take NEED_PC argument and pass it through.
1683 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
1686 2009-02-07 Pedro Alves <pedro@codesourcery.com>
1688 * NEWS: Mention inspecting extra signal information, $_siginfo,
1689 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
1691 2009-02-07 Pedro Alves <pedro@codesourcery.com>
1693 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
1696 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1698 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
1699 (compat_timer_t, compat_clock_t, struct compat_timeval)
1700 (compat_sigval_t, compat_siginfo_t): New types.
1701 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
1702 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
1703 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
1704 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
1705 (amd64_linux_siginfo_fixup): New.
1706 * linux-nat.c (linux_nat_siginfo_fixup): New.
1707 (siginfo_fixup): New.
1708 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
1709 siginfo layout expected by ptrace and the siginfo layout of the
1711 (linux_nat_set_siginfo_fixup): New.
1712 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
1714 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1716 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
1717 * infrun.c (siginfo_value_read, siginfo_value_write): New.
1718 (siginfo_value_funcs): New.
1719 (siginfo_make_value): New.
1720 (_initialize_infrun): Create the $_siginfo convenience variable.
1721 * gdbtypes.h (append_composite_type_field_aligned): Declare.
1722 * gdbtypes.c (append_composite_type_field): Rename to...
1723 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
1724 argument. Handle it.
1725 (append_composite_type_field): Rewrite on top of
1726 append_composite_type_field_aligned.
1727 * value.h (internalvar_make_value): New typedef.
1728 (struct internalvar) <make_value>: New field.
1729 (create_internalvar_type_lazy): Declare.
1730 * value.c (create_internalvar): Clear make_value.
1731 (create_internalvar_type_lazy): New.
1732 (value_of_internalvar): If make_value is set use it.
1733 (preserve_values): Skip internal variables that don't have a
1735 * gdbarch.sh (get_siginfo_type): New.
1736 * gdbarch.h, gdbarch.c: Regenerate.
1738 * linux-tdep.h, linux-tdep.c: New.
1739 * amd64-linux-tdep.c: Include "linux-tdep.h".
1740 (amd64_linux_init_abi): Register linux_get_siginfo_type and
1741 linux_get_siginfo_mapper.
1742 * i386-linux-tdep.c: Include "linux-tdep.h".
1743 (i386_linux_init_abi): Register linux_get_siginfo_type and
1744 linux_get_siginfo_mapper.
1745 * arm-linux-tdep.c: Include "linux-tdep.h".
1746 (i386_linux_init_abi): Register linux_get_siginfo_type and
1747 linux_get_siginfo_mapper.
1749 * linux-nat.c (linux_xfer_siginfo): New.
1750 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
1751 * remote.c (PACKET_qXfer_siginfo_read)
1752 (PACKET_qXfer_siginfo_write): New.
1753 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
1754 "qXfer:siginfo:write" features.
1755 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
1756 (_initialize_remote): Add "set/show remote read-siginfo-object"
1757 and "set/show remote write-siginfo-object" commands.
1759 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
1760 (HFILES_NO_SRCDIR): Add linux-tdep.h.
1761 (ALLDEPFILES): Add linux-tdep.c.
1763 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
1764 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
1767 2009-02-06 Jim Blandy <jimb@codesourcery.com>
1768 Daniel Jacobowitz <dan@codesourcery.com>
1769 Vladimir Prus <vladimir@codesourcery.com>
1770 Pedro Alves <pedro@codesourcery.com>
1772 * defs.h (enum lval_type): New value: lval_computed.
1773 * value.h (struct lval_funcs): New type.
1774 (allocate_computed_value, value_computed_funcs)
1775 (value_computed_closure): New declarations.
1776 * value.c (struct value): Add a structure to the location union
1777 for computed lvalues, containing 'funcs' and 'closure' members.
1778 (allocate_computed_value, value_computed_funcs)
1779 (value_computed_closure): New functions.
1780 (value_free): For computed lvalues, call the closure's
1781 'free_closure' function before freeing the value itself.
1782 (value_copy): If we're copying an lval_computed value, call the
1783 closure's 'copy_closure' function.
1784 (set_value_component_location): If the original value is a
1785 computed lvalue, then call the closure's 'copy_closure' function.
1786 (value_of_internalvar): If an internal variable's value is a
1787 computed lvalue, make retrieving its value produce an equivalent
1789 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
1790 their read function.
1791 (value_assign): Assign to computed lvalues by calling their write
1794 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1796 * linux-nat.c (linux_nat_wait): Adjust.
1797 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
1798 * linux-nat.h (thread_db_init): Delete declaration.
1799 * linux-thread-db.c (target_beneath): Delete.
1800 (thread_db_init): Delete.
1801 (thread_db_detach): Use find_target_beneath.
1802 (thread_db_wait): Adjust interface. Use find_target_beneath.
1803 (thread_db_mourn_inferior): Use find_target_beneath.
1804 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
1805 (thread_db_async_mask): Delete.
1806 (thread_db_pid_to_str): Adjust interface. Use
1807 find_target_beneath.
1808 (thread_db_get_thread_local_address): Adjust interface. Use
1809 find_target_beneath.
1810 (init_thread_db_ops): Delete references to delete functions.
1811 * target.c (update_current_target): Don't inherit or default
1812 to_wait. Don't inherit to_pid_to_str and
1813 to_get_thread_local_address.
1814 (target_translate_tls_address): Look for a pushed target that
1815 implements to_get_thread_local_address, and use it instead of
1816 checking for target_get_thread_local_address_p.
1817 (target_wait, target_pid_to_str): Reimplement as functions.
1818 (dummy_pid_to_str): New.
1819 (init_dummy_target): Register it.
1820 (debug_to_wait): Delete.
1821 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
1822 to_get_thread_local_address accept a pointer to struct target_ops.
1823 (target_wait): Delete macro, and declare as function.
1824 (target_pid_to_str): Likewise.
1825 (target_get_thread_local_address)
1826 (target_get_thread_local_address_p): Delete.
1827 (noprocess): Add NORETURN and ATTR_NORETURN tags.
1828 * inf-ptrace.c (inf_ptrace_wait): Adjust.
1829 (inf_ptrace_pid_to_str): New.
1830 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
1831 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
1832 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
1833 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
1835 * corelow.c (core_pid_to_str): Adjust.
1836 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
1837 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
1838 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
1839 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
1840 * hpux-thread.c (hpux_thread_wait): Adjust.
1841 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
1842 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
1843 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
1844 * procfs.c (procfs_pid_to_str): Adjust.
1845 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
1846 * remote-mips.c (mips_wait): Adjust.
1847 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
1848 * remote.c (remote_wait, remote_pid_to_str)
1849 (remote_get_thread_local_address): Adjust.
1850 * rs6000-nat.c (rs6000_wait): Adjust.
1851 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
1852 (sol_thread_wait, solaris_pid_to_str): Adjust.
1853 * spu-linux-nat.c (spu_child_wait): Adjust.
1854 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
1856 2009-02-06 Tom Tromey <tromey@redhat.com>
1858 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
1859 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
1860 (python-cmd.o): New target.
1861 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
1862 completer prototype.
1863 (add_cmd): Initialize destroyer member of cmd_list_element. Use
1864 make_symbol_completion_list_fn as completer.
1865 (delete_cmd): Call destroyer if one is set.
1866 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
1867 completer member. Add destroyer member.
1868 (set_cmd_completer): Add self parameter to
1869 completer prototype.
1870 * command.h (set_cmd_completer): Add cmd parameter to
1871 completer prototype.
1872 * completer.c (noop_completer, filename_completer,
1873 location_completer, expression_completer, command_completer): Adapt
1874 to new completer prototype.
1875 (complete_line_internal): Pass new parameter to completer function.
1876 * completer.h (noop_completer, filename_completer,
1877 location_completer, expression_completer, command_completer): Adapt
1878 prototypes to new completer prototype.
1879 * interps.c (interpreter_completer): Adapt to new completer
1881 * python/python-cmd.c: New file.
1882 * python/python-internal.h (gdbpy_initialize_commands): Add
1884 (gdbpy_doc_cst): Add forward declaration.
1885 * python/python.c (gdbpy_doc_cst): Declare.
1886 (_initialize_python): Call gdbpy_initialize_commands. Initialize
1888 * symtab.c (make_symbol_completion_list_fn): New function.
1889 * symtab.h (make_symbol_completion_list_fn): Add prototype.
1891 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1893 * target.c (target_get_osdata): Check for equal or higher than
1894 process_stratum, not dummy_stratum.
1896 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1898 * remote.c (extended_remote_can_run): Delete.
1899 (init_remote_ops): Don't register it.
1900 * target.c (target_get_osdata): Don't check for target_can_run.
1901 Instead any target that has already been pushed, otherwise
1902 fallback to the default run target.
1904 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1906 * target.c (target_create_inferior, target_detach)
1907 (target_mourn_inferior, target_attach, target_close): Do target
1909 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
1910 (debug_to_mourn_inferior, debug_to_close): Delete.
1911 (setup_target_debug): Adjust.
1913 2009-02-05 Pedro Alves <pedro@codesourcery.com>
1915 * target.h (target_stopped_data_address_p): Delete declaration,
1916 and don't define as macro.
1917 * target.c (target_stopped_data_address_p): Delete.
1919 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
1920 Tom Tromey <tromey@redhat.com>
1922 * python/python-utils.c (target_string_to_unicode): New function.
1923 * python/python-internal.h (target_string_to_unicode): New prototype.
1924 * python/python-value.c (valpy_string): New function.
1925 (value_object_methods): Add `string' entry.
1927 2009-02-05 Pedro Alves <pedro@codesourcery.com>
1929 * target.h (target_tid_to_str): Delete.
1930 * thread.c (print_thread_info, thread_apply_all_command)
1931 (thread_apply_command, thread_command, do_captured_thread_select):
1932 Use target_pid_to_str instead of target_tid_to_str.
1933 * linux-fork.c (delete_fork_command): Likewise.
1935 2009-02-05 Pedro Alves <pedro@codesourcery.com>
1937 * frame.c (has_stack_frames): Make public.
1938 (get_prev_frame): Don't allow a NULL this_frame anymore.
1939 * frame.h (has_stack_frames): Declare.
1940 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
1941 to get_prev_frame, instead start at get_current_frame.
1942 (varobj_create): Check has_stack_frames before getting any frame;
1943 eliminate one usage of deprecated_safe_get_selected_frame.
1945 2009-02-05 Tom Tromey <tromey@redhat.com>
1946 Thiago Jung Bauermann <bauerman@br.ibm.com>
1948 * python/python.c (GdbMethods): Move to bottom of file.
1949 (get_parameter, execute_gdb_command, gdbpy_write,
1950 gdbpy_flush): Remove forward declarations.
1951 (eval_python_from_control_command): Fix error checking of function
1952 PyRun_SimpleString. Fix error string.
1953 (python_command): Likewise.
1954 (execute_gdb_command): Added from_tty argument.
1956 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
1958 * language.h (language_dfn): Add la_get_string member.
1959 (LA_GET_STRING): New macro.
1960 (default_get_string): New prototype.
1961 * language.c (default_get_string): New function.
1962 (unknown_language_defn, auto_language_defn, local_language_defn): Use
1963 default_get_string for la_get_string.
1964 * c-lang.c (c_get_string): New function.
1965 (c_language_defn, cplus_language_defn, asm_language_defn): Use
1966 c_get_string for la_get_string.
1967 (minimal_language_defn): Likewise
1968 * ada-lang.c (ada_language_defn): Likewise.
1969 * f-lang.c (f_language_defn): Use default_get_string for
1971 * jv-lang.c (java_language_defn): Likewise.
1972 * m2-lang.c (m2_language_defn): Likewise.
1973 * objc-lang.c (objc_language_defn): Likewise.
1974 * p-lang.c (p_language_defn): Likewise.
1975 * scm-lang.c (scm_language_defn): Likewise.
1976 * typeprint.c (type_to_string): New function.
1977 * value.h (type_to_string): New prototype.
1978 * valprint.c (val_print_string): Factor out code for reading string
1979 from the inferior into its own function. Put 2 spaces after period
1981 (read_string): New function.
1982 * valprint.h (read_string): New prototype.
1984 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
1985 Tom Tromey <tromey@redhat.com>
1987 PR breakpoints/8079:
1988 * breakpoint.c (print_one_breakpoint): Use exp_string field
1989 to display expression of watchpoints.
1990 (mention): Likewise.
1991 (watch_command_1): Remove trailing whitespace from expression.
1992 * printcmd.c (struct display) <exp_string>: New field.
1993 (display_command): Set exp_string.
1994 (free_display): Free exp_string.
1995 (clear_displays): Use free_display.
1996 (do_one_display): Print exp_string.
1997 (display_info): Likewise.
1999 2009-02-04 Tom Tromey <tromey@redhat.com>
2000 Thiago Jung Bauermann <bauerman@br.ibm.com>
2001 Phil Muldoon <pmuldoon@redhat.com>
2003 * python/python-internal.h (gdbpy_get_value_from_history): Rename
2004 prototype to gdbpy_history.
2005 (gdbpy_is_string): Declare.
2006 (python_string_to_host_string): Declare.
2007 * python/python-utils.c (gdbpy_is_string): New function.
2008 (unicode_to_encoded_string): New function.
2009 (unicode_to_target_string): Use it.
2010 (python_string_to_host_string): New function.
2011 * python/python-value.c (valpy_address): New function.
2012 (convert_value_from_python): Use gdbpy_is_string. Change to throw
2013 Python exception instead of a GDB exception on error. Properly check
2015 (valpy_getitem): Convert field name to host string. Handle array
2016 accesses. Adapt to new behaviour of convert_value_from_python.
2017 (valpy_new): Adapt to new behaviour of convert_value_from_python.
2018 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
2019 VALPY_BITXOR, VALPY_BITOR>: New constants.
2020 (valpy_binop): Update. Adapt to new behaviour of
2021 convert_value_from_python.
2022 (valpy_invert): New function.
2023 (valpy_lsh): Likewise.
2024 (valpy_rsh): Likewise.
2025 (valpy_and): Likewise.
2026 (valpy_or): Likewise.
2027 (valpy_xor): Likewise.
2028 (valpy_richcompare): Call convert_value_from_python instead of doing
2030 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
2031 (gdbpy_get_value_from_history): Rename
2032 function to gdbpy_history.
2033 (gdbpy_initialize_values): Don't set tp_new.
2034 (value_object_type): Add valpy_new.
2035 (value_object_methods): Add `address' entry.
2036 (value_object_as_number): Update for new methods.
2037 * python/python.c (GdbMethods): Rename entry from
2038 `get_value_from_history' to `history'.
2040 2009-02-04 Jerome Guitton <guitton@adacore.com>
2042 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
2043 of type to guard against a crash.
2045 2009-02-04 Jerome Guitton <guitton@adacore.com>
2047 * value.c (value_from_contents_and_address): Always return
2048 a lval_memory value, even if address is null.
2050 2009-02-04 Tristan Gingold <gingold@adacore.com>
2052 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
2053 (amd64_darwin_sigcontext_addr): Ditto.
2054 (darwin_dwarf_signal_frame_p): Ditto.
2055 (i386_darwin_init_abi): Handle signal frames, use the const for
2057 (x86_darwin_init_abi_64): Ditto.
2059 2009-02-04 Tristan Gingold <gingold@adacore.com>
2061 * i386-tdep.c (i386_sigtramp_p): Make it public.
2062 * i386-tdep.h (i386_sigtramp_p): Declare.
2064 2009-02-04 Tristan Gingold <gingold@adacore.com>
2066 * machoread.c (macho_symfile_read): Read minsymtab also from
2068 (macho_symfile_read): Try to read dwarf2 frame info from main
2069 object file, but not from OSO files.
2070 (macho_symfile_offsets): Update section names for latest BFD
2072 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
2073 (x86_darwin_init_abi_64): Ditto.
2074 * solib-darwin.c: New file.
2075 * solib-darwin.h: New file.
2076 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
2078 2009-02-04 Tristan Gingold <gingold@adacore.com>
2080 * solist.h (struct target_so_ops): Comment fallback behavior for
2083 2009-02-03 Tom Tromey <tromey@redhat.com>
2085 * completer.c (add_struct_fields): Check type_name against NULL
2088 2009-02-03 Joel Brobecker <brobecker@adacore.com>
2090 * MAINTAINERS: Update Elena's email address.
2092 2009-02-02 Joel Brobecker <brobecker@adacore.com>
2094 * breakpoint (update_watchpoint): Minor comment adjustment.
2096 2009-02-02 Tom Tromey <tromey@redhat.com>
2099 * completer.c (count_struct_fields): Count method names.
2100 (add_struct_fields): Add matching method names.
2102 2009-02-02 Doug Evans <dje@google.com>
2104 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
2105 doing any further tcl/tk configury. Don't configure gdbtk if
2106 tcl or tk check fails.
2107 * aclocal.m4: Regenerate.
2108 * configure: Regenerate.
2110 2009-02-02 Tom Tromey <tromey@redhat.com>
2113 * valops.c (find_overload_match): Follow typedefs before taking
2114 address of object argument.
2116 2009-02-01 Doug Evans <dje@google.com>
2118 * target.h (target_waitstatus_to_string): Declare.
2119 * target.c (target_waitstatus_to_string): New function. Copied from
2120 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
2121 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
2122 TARGET_WAITKIND_NO_HISTORY.
2123 (debug_to_wait): Call it.
2124 * infrun.c (wait_for_inferior): If debug_infrun, print result of
2126 (fetch_inferior_event): Ditto.
2128 2009-01-30 Tom Tromey <tromey@redhat.com>
2130 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
2132 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
2135 * thread.c (do_captured_list_thread_ids): Report the current
2138 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
2140 * breakpoint.c (create_breakpoint, create_breakpoints)
2141 (break_command_really, set_breakpoint): New parameter enabled.
2142 (create_breakpoint, break_command_really): Make breakpoint
2143 disabled if so requested.
2144 * breakpoint.h (set_breakpoint): New parameter enabled.
2145 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
2147 2009-01-28 Doug Evans <dje@google.com>
2149 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
2150 (amd64_displaced_step_fixup): Declare.
2151 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
2152 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
2153 and make static global.
2154 (amd64_arch_regmap_len): New static global.
2155 (amd64_arch_reg_to_regnum): New function.
2156 (struct amd64_insn): New struct.
2157 (struct displaced_step_closure): New struct.
2158 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
2159 (rex_prefix_p,skip_prefixes)
2160 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
2161 (amd64_insn_length,amd64_get_unused_input_int_reg)
2162 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
2163 (amd64_displaced_step_copy_insn)
2164 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
2165 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
2166 (amd64_displaced_step_fixup): New functions.
2167 * amd64-linux-tdep.c: #include arch-utils.h.
2168 (amd64_linux_init_abi): Install displaced stepping support.
2170 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
2171 Jerome Guitton <guitton@adacore.com>
2173 * configure, config.in: Regenerated.
2174 * configure.ac: Add --with-system-gdbinit.
2175 * main.c (get_init_files): New.
2176 (captured_main): Use get_init_files. Load system gdbinit before
2178 (print_gdb_help): Print location of init files.
2180 2009-01-28 Pedro Alves <pedro@codesourcery.com>
2182 * corefile.c (generic_search): Delete disabled code.
2183 * gdbcore.h (generic_search): Delete declaration.
2185 2009-01-26 Pedro Alves <pedro@codesourcery.com>
2187 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
2188 parent to the child.
2189 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
2190 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
2191 remove_breakpoints to remove breakpoints from the parent.
2193 2009-01-26 Pedro Alves <pedro@codesourcery.com>
2195 PR backtrace/9458, PR backtrace/8864:
2196 * frame.c (create_new_frame): Update the frame's cached PC before
2197 finding its unwinder. Use frame_id_build to build the new frame's
2199 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
2200 array values from the ``args'' array values.
2202 2009-01-26 Pedro Alves <pedro@codesourcery.com>
2204 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
2205 (create_array_type, create_set_type, init_flags_type)
2206 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
2207 with a call to XZALLOC or XCALLOC, and pairs of calls to
2208 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
2210 2009-01-26 Pedro Alves <pedro@codesourcery.com>
2212 Add "maint set|show internal-error|internal-warning quit|corefile
2213 ask|yes|no" commands.
2216 * utils.c (internal_problem_ask, internal_problem_yes)
2217 (internal_problem_no, internal_problem_modes): New.
2218 (struct internal_problem): Remove FIXME. Make should_quit and
2219 should_dump_core types to char *.
2220 (internal_vproblem, internal_error_problem)
2221 (internal_warning_problem): Adjust.
2222 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
2224 (add_internal_problem_command): New.
2225 (_initialize_utils): New.
2227 2009-01-25 Pedro Alves <pedro@codesourcery.com>
2229 * infcmd.c (program_info): Use paddress instead of casting stop_pc
2232 2009-01-24 Pedro Alves <pedro@codesourcery.com>
2234 * infrun.c (normal_stop): Don't call
2235 deprecated_update_frame_pc_hack.
2236 * frame.c (deprecated_update_frame_pc_hack)
2237 (deprecated_update_frame_base_hack): Delete, and ...
2238 (create_new_frame): ... inline here.
2239 * frame.h (deprecated_update_frame_pc_hack)
2240 (deprecated_update_frame_base_hack): Delete declarations.
2242 2009-01-23 Pedro Alves <pedro@codesourcery.com>
2244 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
2245 * cli/cli-setshow.c (do_setshow_command): Handle it.
2246 * command.h (enum var_types): Add var_zuinteger.
2247 (add_setshow_zuinteger_cmd): Declare.
2249 * valprint.c (_initialize_valprint): Change the set input-radix
2250 and set output-radix commands to zuinteger type.
2252 2009-01-23 Pedro Alves <pedro@codesourcery.com>
2255 * infrun.c (normal_stop): Tag threads as stopped, and run the
2256 hook-stop before printing the stack frame.
2258 2009-01-22 Pedro Alves <pedro@codesourcery.com>
2261 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
2264 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
2266 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
2269 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
2272 * infcmd.c (signal_command): Do not specify a resume PC.
2274 2009-01-19 Doug Evans <dje@google.com>
2276 * dummy-frame.c (dummy_frame): Replace regcache member with
2278 (dummy_frame_push): Replace caller_regcache arg with caller_state.
2279 All callers updated.
2280 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
2281 (dummy_frame_pop): Rewrite. Verify requested frame is in the
2282 dummy frame stack. Restore program state.
2283 (cleanup_dummy_frames): Rewrite.
2284 (dummy_frame_sniffer): Update. Make static.
2285 * dummy-frame.h (regcache,frame_info): Delete forward decls.
2286 (inferior_thread_state): New forward decl.
2287 (dummy_frame_push): Update prototype.
2288 * frame.c (frame_pop): dummy_frame_pop now does all the work for
2290 * infcall.c (breakpoint_auto_delete_contents): Delete.
2291 (get_function_name,run_inferior_call): New fns.
2292 (call_function_by_hand): Simplify by moving some code to
2293 get_function_name, run_inferior_call. Inferior function call wrapped
2294 in TRY_CATCH so there's less need for cleanups and all exits from
2295 proceed are handled similarily. Detect program exit.
2296 Detect program stopping in a different thread.
2297 Make error messages more consistent.
2298 * inferior.h (inferior_thread_state): Declare (opaque type).
2299 (save_inferior_thread_state,restore_inferior_thread_state,
2300 make_cleanup_restore_inferior_thread_state,
2301 discard_inferior_thread_state, get_inferior_thread_state_regcache):
2303 (save_inferior_status): Update prototype.
2304 * infrun.c: (normal_stop): When stopped for the completion of an
2305 inferior function call, verify the expected stack frame kind.
2306 (inferior_thread_state): New struct.
2307 (save_inferior_thread_state,restore_inferior_thread_state,
2308 do_restore_inferior_thread_state_cleanup,
2309 make_cleanup_restore_inferior_thread_state,
2310 discard_inferior_thread_state,
2311 get_inferior_thread_state_regcache): New functions.
2312 (inferior_status): Move stop_signal, stop_pc, registers to
2313 inferior_thread_state. Remove restore_stack_info.
2314 (save_inferior_status): Remove arg restore_stack_info.
2315 All callers updated. Remove saving of state now saved by
2316 save_inferior_thread_state.
2317 (restore_inferior_status): Remove restoration of state now done by
2318 restore_inferior_thread_state.
2319 (discard_inferior_status): Remove freeing of registers, now done by
2320 discard_inferior_thread_state.
2322 2009-01-18 Pedro Alves <pedro@codesourcery.com>
2324 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
2325 at a time, times NUM_TO_SCROLL.
2326 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
2327 fetch the selected frame if there is no stack.
2329 2009-01-18 Pedro Alves <pedro@codesourcery.com>
2332 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
2334 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
2335 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
2336 is thrown while handling an event, finish the thread state.
2337 (normal_stop): Use finish_thread_state cleanup.
2338 * infcmd.c (run_command_1): If an error is thrown while starting
2339 the inferior, finish the thread state.
2341 2009-01-18 Pedro Alves <pedro@codesourcery.com>
2343 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
2344 skip breakpoints without a location (pending breakpoints).
2346 2009-01-18 Pedro Alves <pedro@codesourcery.com>
2349 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
2351 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
2353 * thread.c (thread_command): Move call to annotate_thread_changed
2355 (do_captured_thread_select): ... here, to avoid printing an
2356 annotation if the thread change generates an exception.
2358 2009-01-16 Joel Brobecker <brobecker@adacore.com>
2360 * NEWS: Document x86_64/MinGW as a new native configuration.
2362 2009-01-16 Joel Brobecker <brobecker@adacore.com>
2364 * NEWS: Move the documentation of "info os processes" to
2365 the appropriate section (documenting the new commands).
2367 2009-01-15 Doug Evans <dje@google.com>
2369 * target.h (target_signal_to_string): Make return type const char *.
2370 (target_signal_to_name): Ditto.
2371 (target_signal_from_name): Make arg const char *.
2372 * infrun.c (sig_print_info): Update.
2373 * signals/signals.c (signals): Make array and struct members const.
2374 (target_signal_to_string): Make return type const char *.
2375 (target_signal_to_name): Ditto.
2376 (target_signal_from_name): Make arg const char *.
2378 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
2379 Tristan Gingold <gingold@adacore.com>
2381 * solist.h (struct target_so_ops): New member bfd_open.
2382 (solib_find): Add prototype.
2383 (solib_bfd_fopen): Add prototype.
2384 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
2385 from solib_bfd_open.
2386 (solib_bfd_open): Use ops->bfd_open override if present. Call
2387 solib_find and solib_bfd_open otherwise.
2389 * objfiles.h (OBJF_KEEPBFD): New define.
2390 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
2391 objfile flag is set.
2392 * solib.c (symbol_add_stub): Do not allocate second BFD for
2393 shared library; use OBJF_KEEPBFD flag on solib objfile.
2395 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
2397 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
2399 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
2401 * value.h (address_of_variable): Add prototype.
2402 (locate_var_value): Remove prototype.
2404 * findvar.c (read_var_value): Do not attempt to default frame
2406 (locate_var_value): Remove function.
2407 * valops.c (value_of_variable): Retrieve selected frame for
2408 symbols that require a frame when called with NULL block.
2409 * valops.c (address_of_variable): New function.
2411 * eval.c (evaluate_subexp_for_address): Call address_of_variable
2412 instead of calling locate_var_value.
2413 (evaluate_subexp_with_coercion): Likewise.
2415 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
2417 * NEWS: Document "define" for prefixed commands.
2418 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
2419 show_user_1 for prefix commands.
2420 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
2421 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
2422 commands. Return the containing command list.
2423 (define_command, document_command): Update to handle prefix commands.
2424 (show_user_1): Add prefix and name arguments. Handle prefix
2426 * cli/cli-script.h (show_user_1): Update prototype.
2428 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
2430 * mingw-ser.c (console_select_thread): Add return to make
2432 (pipe_select_thread): Likewise.
2433 (file_select_thread): Likewise.
2435 2009-01-14 Pedro Alves <pedro@codesourcery.com>
2437 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
2440 2009-01-14 Pedro Alves <pedro@codesourcery.com>
2442 * remote.c (extended_remote_mourn_1): Invalidate our notion of
2443 current general thread.
2445 2009-01-14 Pedro Alves <pedro@codesourcery.com>
2447 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
2448 without a live selected thread.
2450 2009-01-14 Joel Brobecker <brobecker@adacore.com>
2452 Update the copyright notice of some of the files I missed
2453 in the previous copyright update.
2455 2009-01-14 Joel Brobecker <brobecker@adacore.com>
2457 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
2458 base address instead of casting it to DWORD.
2460 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
2462 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
2463 for NULL frame pointers.
2465 2009-01-13 Mark Kettenis <kettenis@gnu.org>
2467 * utils.c (host_address_to_string): Reimplement in a way that
2468 avoids the cast of the address to long.
2470 2009-01-13 Joel Brobecker <brobecker@adacore.com>
2472 * mdebugread.c (parse_symbol): Save the symbol private data
2473 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
2474 (psymtab_to_symtab_1): Likewise.
2475 (parse_procedure): Declare variable "e" only in the scope
2476 where it is used. Extract the symbol private data using
2479 2009-01-13 Jim Blandy <jimb@codesourcery.com>
2481 Abstract out common code for copying value locations.
2483 * value.h (set_value_component_location): New declaration.
2484 * value.c (set_value_component_location): New function.
2485 (value_primitive_field): Use it.
2486 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
2487 * valops.c (search_struct_field, value_slice): Same.
2488 * ada-lang.c (coerce_unspec_val_to_type)
2489 (ada_value_primitive_packed_val): Same.
2491 2009-01-13 Joel Brobecker <brobecker@adacore.com>
2493 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
2495 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
2497 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
2499 * i386-cygwin-tdep.c: Ditto.
2500 * i386-windows-nat.c: Ditto.
2501 * windows-nat.h: Ditto.
2502 * windows-tdep.c: Ditto.
2503 * windows-tdep.h: Ditto.
2504 * windows-nat.c: Ditto.
2505 (cygwin_load_start): Redefine as CORE_ADDR.
2506 (cygwin_load_end): Ditto.
2507 (windows_make_so): Coerce result of address arithmetic to uintptr_t
2508 before coercing to CORE_ADDR to avoid a compiler warning.
2509 (handle_exception): Define addr as CORE_ADDR and coerce
2510 ExceptionAddress to uintptr_t before assigining to avoid a compiler
2512 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
2515 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2517 Fix linking with --enable-targets=all:
2518 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
2519 (HFILES_NO_SRCDIR): Add windows-tdep.h.
2520 (ALLDEPFILES): Add windows-tdep.c.
2522 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
2524 * win32-nat.h: Delete.
2525 * windows-nat.h: Rename from win32-nat.h.
2526 * win32-nat.c: Delete.
2527 * windows-nat.c: Rename from win32-nat.c.
2528 * win32-termcap.c: Delete.
2529 * windows-termcap.c: Rename from win32-termcap.c.
2530 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
2531 * configure.ac: Handle rename from win32-termcap.c ->
2533 * configure: Regenerate.
2534 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
2535 -> windows-termcap.c.
2536 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
2538 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
2539 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
2541 (win32_make_so): Handle cygwin compiler warning due to change of
2542 load_addr from DWORD to LPVOID.
2543 (handle_load_dll): Use %p in format string to properly print address
2544 and avoid a compiler warning.
2545 (DEBUG_EXCEPTION_SIMPLE): Ditto.
2546 (handle_exception): Ditto.
2547 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
2548 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
2550 * config/i386/mingw.mh: Ditto.
2551 * config/i386/mingw64.mh: Ditto.
2553 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2555 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
2556 arrayprint_recurse_level to a parameter. Update all the callers. New
2557 comment at autovariables.
2559 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2561 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
2564 2009-01-11 Joel Brobecker <brobecker@adacore.com>
2566 * target.c (target_xfer_partial): Use host_address_to_string to
2567 print the address of readbuf and writebuf. Cast the address of
2568 elements inside the myaddr buffer into intptr_t.
2569 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
2570 Cast the address of elements inside the myaddr buffer into
2573 2009-01-11 Joel Brobecker <brobecker@adacore.com>
2575 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
2576 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
2577 * configure.host, configure.tgt: Add handling for x86_64/windows.
2578 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
2579 and amd64-windows-tdep.c.
2581 2009-01-11 Joel Brobecker <brobecker@adacore.com>
2583 * win32-tdep.h, win32-tdep.c: New files.
2584 * i386-cygwin-tdep.h: Delete.
2585 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
2587 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
2588 * win32-nat.c: Likewise.
2589 * configure.tgt: Add win32-tdep.o to the list of target object
2590 files for i386-cygwin and i386-mingw targets.
2592 2009-01-11 Joel Brobecker <brobecker@adacore.com>
2594 * win32-nat.h: New file.
2595 * win32-nat.c (mappings): Initialize to NULL.
2596 (win32_set_context_register_offsets): New function.
2597 * i386-windows-nat.c: New file.
2598 (mappings): Moved here from win32-nat.c.
2599 (_initialize_i386_windows_nat): New function.
2600 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
2601 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
2603 2009-01-09 Andreas Schwab <schwab@suse.de>
2605 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
2607 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
2609 * gdbtypes.c (append_composite_type_field): Correct the location of
2612 2009-01-09 Pedro Alves <pedro@codesourcery.com>
2614 * defs.h (deprecated_error_hook): Delete declaration.
2615 * interps.c (clear_interpreter_hooks): Adjust.
2616 * remote-sim.c (gdb_os_error): Don't try to call
2617 deprecated_error_hook. No need to call exit anymore.
2618 * top.c (deprecated_error_hook): Delete.
2620 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2622 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
2623 to print the address of the gdbarch pointer.
2625 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2627 * gdbarch.sh: Fix all the compilation errors on amd64-windows
2628 due to casting a pointer to a long when printing a function
2629 address. Instead, use host_address_to_string to convert our
2630 address to a string.
2631 * gdbarch.c: Regenerate.
2633 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2635 * event-top.c (async_disconnect, async_stop_sig): use "raise"
2636 instead of "kill" to raise a signal.
2638 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2640 * win32-nat.c (get_module_name): Change the type of parameter
2641 "base_address" to LPVOID. Remove unnecessary cast.
2642 (struct lm_info): Change type of load_addr to LPVOID.
2643 (win32_make_so): Change the type of parameter "load_addr"
2644 to LPVOID. Remove some unnecessary casts.
2645 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
2646 (win32_xfer_shared_libraries): Add missing cast.
2648 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2650 * win32-nat.c (has_detach_ability, set_process_privilege):
2651 Cast the result of GetProcAddress to (void *) to avoid
2652 a compilation warning.
2654 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2656 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
2659 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2661 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
2662 definition of local variable "done".
2663 (info_w32_command, handle_exception): Remove unnecessary cast.
2665 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2667 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
2668 DebugSetProcessKillOnExit. Update all uses in this file.
2669 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
2670 Update all uses in this file.
2672 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2674 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
2675 and use it when pushing the target.
2676 (win32_attach, win32_create_inferior): Update call to
2677 do_initial_win32_stuff.
2678 (win32_detach, win32_mourn_inferior): Use our ops parameter
2679 instead of the global win32_ops to unpush the target.
2681 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2683 * ser-mingw.c (ser_windows_open): Use proper type when casting
2684 in call to _open_osfhandle.
2686 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
2688 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
2690 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2692 * CONTRIBUTE: Minor reformatting.
2694 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
2696 * MAINTAINERS: Add myself to Write After Approval.
2697 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
2700 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
2702 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
2703 Call exit to make it obvious to GCC.
2705 2009-01-08 Tom Tromey <tromey@redhat.com>
2707 PR breakpoints/9350:
2708 * varobj.c (varobj_invalidate): Unconditionally free
2710 * symfile.c (syms_from_objfile): Free local_addr when returning
2712 * exec.c (exec_file_attach): Do cleanups before returning.
2713 (exec_file_command): Likewise.
2714 * corefile.c (reopen_exec_file): Do cleanups before returning.
2715 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
2717 (do_vec_free): New function.
2718 (update_global_location_list): Make a cleanup for old_locations.
2719 Do cleanups before returning. Remove unused variable 'e'.
2720 (find_condition_and_thread): Free result of parsing the
2722 (print_it_typical): Do cleanups before returning.
2723 (breakpoint_re_set_one): Always free sals.sals.
2725 2009-01-08 Joel Brobecker <brobecker@adacore.com>
2726 Emi Suzuki <emi-suzuki@tjsys.co.jp>
2728 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
2731 2009-01-07 Doug Evans <dje@google.com>
2733 * top.c (gdb_prompt_string): Delete, unused.
2735 2009-01-07 Pedro Alves <pedro@codesourcery.com>
2737 Delete ONE_PROCESS_WRITETEXT leftovers.
2739 * breakpoint.c (insert_bp_location): Delete process_warning
2741 (insert_breakpoint_locations): Adjust.
2742 (reattach_breakpoints): Adjust.
2743 * infrun.c (normal_stop): Drop "It might be running in another
2746 2009-01-07 Stan Shebs <stan@codesourcery.com>
2748 * config/pa/linux.mh (XDEPFILES): Remove.
2750 2009-01-07 Doug Evans <dje@google.com>
2752 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
2754 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
2756 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
2757 spacing, a regression from 2008-04-22.
2759 2009-01-07 Joel Brobecker <brobecker@adacore.com>
2761 * utils.c (gdb_print_host_address): Adjust implementation to
2762 reuse host_address_to_string. Move comment explaining the conversion
2763 from host address to string from here...
2764 (host_address_to_string): ... to there.
2766 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
2768 * MAINTAINERS: Add myself for write after approval privileges.
2770 2009-01-06 Tom Tromey <tromey@redhat.com>
2772 * value.c (set_internalvar): Use value_free, not xfree.
2774 2009-01-06 Jim Blandy <jimb@red-bean.com>
2776 Check return values of functions declared with warn_unused_result
2777 attribute in GLIBC 2.8.
2778 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
2779 * inflow.c (check_syscall): New function.
2780 (new_tty): Use check_syscall to check return values from open and dup.
2781 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
2782 * main.c (captured_main): Call cwd after setting up gdb_stderr;
2783 check for errors from getcwd.
2784 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
2785 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
2786 (stdio_file_fputs): Same.
2787 * utils.c (internal_vproblem): abort if last-ditch error message
2790 * top.c (gdb_init): Don't set the current directory here; that's
2791 already been done in captured_main.
2793 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
2795 * ser-tcp.c: Adjust includes.
2796 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
2797 (tcp_auto_retry, tcp_retry_limit): Declare.
2798 (TIMEOUT): Remove, in favor of tcp_retry_limit.
2799 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
2800 (wait_for_connect): New function.
2801 (net_open): Use it. Add auto-retry logic.
2802 (set_tcp_cmd, show_tcp_cmd): New functions.
2803 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
2804 and "set/show tcp connect-timeout" commands.
2805 * NEWS: Document new commands.
2807 2009-01-05 Tom Tromey <tromey@redhat.com>
2809 * python/python-internal.h (Py_ssize_t): Define as int.
2811 2009-01-05 Jim Blandy <jimb@red-bean.com>
2813 * MAINTAINERS: Fix my e-mail address as steering committee member.
2815 2009-01-03 Joel Brobecker <brobecker@adacore.com>
2817 Updated copyright notices for most files.
2819 2009-01-03 Joel Brobecker <brobecker@adacore.com>
2821 * top.c (print_gdb_version): Update copyright year.
2823 2009-01-03 Joel Brobecker <brobecker@adacore.com>
2825 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
2827 2009-01-01 Pedro Alves <pedro@codesourcery.com>
2829 PR breakpoints/9681:
2830 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
2831 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
2832 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
2833 retrow all other exceptions.
2835 For older changes see ChangeLog-2008.
2841 version-control: never