1 2009-05-13 Joel Brobecker <brobecker@adacore.com>
3 * c-lang.c (print_wchar): Remove unnecessary cast.
5 2009-05-12 Jim Blandy <jimb@red-bean.com>
7 * MAINTAINERS: Remove self as m32c target maintainer.
9 2009-05-12 Pedro Alves <pedro@codesourcery.com>
11 * cli/cli-decode.c (deprecated_add_set_cmd): Delete.
12 * command.h (deprecated_add_set_cmd): Delete declaration.
13 * gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
14 'set debug gnu-nat' and 'show debug gnu-nat'.
15 * i386-nat.c (_initialize_i386_nat): Replace 'maint
16 show-debug-registers' with 'maint set show-debug-registers' and
17 'maint show show-debug-registers'.
18 * mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
19 show-debug-registers' with 'maint set show-debug-registers' and
20 'maint show show-debug-registers'.
22 2009-05-12 Joel Brobecker <brobecker@adacore.com>
24 * c-lang.c (print_wchar): Convert w into a gdb_wchar_t before
25 pushing it on the output obstack.
27 2009-05-11 Joel Brobecker <brobecker@adacore.com>
29 Fix internal error on breaking at a multi-locations caller source line.
30 * breakpoint.c (parse_breakpoint_sals): Set EXPLICIT_PC for the `break'
31 command with no parameters.
33 2009-05-11 Pedro Alves <pedro@codesourcery.com>
35 * linux-nat.c (enum sigchld_state): Delete.
36 (linux_nat_async_events_state): Delete.
37 (struct waitpid_result): Delete.
38 (waitpid_queue): Delete.
39 (queued_waitpid_1): Delete.
40 (async_file_flush): New.
41 (queued_waitpid, push_waitpid): Delete.
42 (async_file_mark): New.
43 (drain_queued_events): Delete.
44 (my_waitpid): Remove locally queued events handling.
45 (linux_test_for_tracefork): Upjust.
46 (linux_child_follow_fork): Ditto.
47 (sync_sigchld_action): Delete.
48 (blocked_mask): Reinstate.
49 (async_sigchld_action): Rename to...
50 (sigchld_action): ... this.
51 (block_child_signals): New.
52 (restore_child_signals_mask): New.
53 (lin_lwp_attach_lwp): Adjust.
54 (linux_nat_create_inferior): Ditto.
55 (linux_nat_attach): Also use lp->status in async mode.
56 (get_pending_status): Don't use queued_waitpid.
57 (linux_nat_detach): Don't drain locally queued events.
58 (linux_nat_resume): Allow pending wait statuses stored lp->status
59 in async mode. If returning early due to a pending event,
60 re-register the event source.
61 (stop_wait_callback): Allow pending wait statuses stored
62 lp->status in async mode.
63 (pipe_to_local_event_queue, local_event_queue_to_pipe): Delete.
64 (linux_nat_wait): Rename to ...
65 (linux_nat_wait_1): ... this. Allow pending wait statuses stored
66 lp->status in async mode. Always add WNOHANG to the waitpid
67 options in async mode.
68 (linux_nat_wait): New.
69 (kill_callback): Don't drain locally queued events.
70 (sigchld_handler): Rewrite.
71 (linux_nat_is_async_p, linux_nat_can_async_p): Fix comments to
72 refer to "set target-async".
73 (linux_nat_async_mask): If in non-stop, and re-enabling async
74 mode, re-register the target event source in the event loop.
75 (linux_nat_event_pipe_pop, linux_nat_event_pipe_push)
76 (get_pending_events, async_sigchld_handler)
77 (linux_nat_async_events): Delete.
78 (handle_target_event): New.
79 (linux_nat_async_file_handler): Delete.
80 (linux_async_pipe): New.
81 (linux_nat_async): Only re-register in the event loop if not
82 registered yet. Always notify the event-loop once if enabling the
84 (linux_nat_stop_lwp): Rewrite to handle pending events stored in
85 lp->status, not in the locally queued event list.
86 (linux_nat_stop): Don't mask out async event handling.
87 (linux_nat_setup_async): Delete.
88 (_initialize_linux_nat): Adjust.
89 (lin_thread_get_thread_signals): blocked_mask is global again.
92 2009-05-11 Pierre Muller <muller.u-strasbg.fr>
96 * target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ...
97 (target_stoppped_by_watchpoint): New macro.
98 (HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ...
99 (target_have_steppable_watchpoint): New macro.
100 (HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ...
101 (target_have_continuable_watchpoint): New macro.
102 (TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ...
103 (target_can_use_hardware_watchpoint): New macro.
104 (TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ...
105 (target_region_ok_for_hw_watchpoint): New macro.
107 * breakpoint.c (update_watchpoint): Use new macros.
108 (bpstat_alloc): Likewise.
109 (create_breakpoint): Likewise.
110 (watch_command_1): Likewise.
111 (can_use_hardware_watchpoint): Likewise.
112 (do_enable_breakpoint): Likewise.
113 * infrun.c (handle_inferior_event): Adapt to new macros.
114 * mips-tdep.c (mips_gdbarch_init): Update comments.
115 * procfs.c (procfs_set_watchpoint): Update comment.
116 (procfs_insert_watchpoint): Adapt to new macros.
117 * remote-m32r-sdi.c (m32r_stop):
118 * remote-mips.c (mips_remove_breakpoint):
119 * target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros.
120 (debug_to_stopped_by_watchpoint): Likewise.
123 2009-05-10 Pierre Muller <muller.u-strasbg.fr>
125 * src/gdb/target.h: Remove all tests for already defined
126 macros. All macros defined here should not be set in config
129 2009-05-08 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
131 * ppc-linux-nat.c (have_ptrace_getsetregs): New variable.
132 (have_ptrace_getsetfpregs): Likewise.
133 fetch_all_gp_regs): New function.
134 (fetch_gp_regs): New function.
135 (fetch_all_fp_regs): Likewise.
136 (fetch_fp_regs): New function.
137 (fetch_ppc_registers): Using the new methods to fetch general-
138 purpose and floating-pointer registers.
139 (store_all_gp_regs): New function.
140 (store_gp_regs): Likewise.
141 (store_all_fp_regs): New function.
142 (store_fp_regs): Likewise.
143 (store_ppc_registers): Using the new methods to store general-
144 purpose and floating-pointer registers.
146 2009-05-08 Doug Evans <dje@google.com>
148 * linux-nat.c (linux_xfer_siginfo): Delete unused locals lp, n.
150 2009-05-07 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
152 * MAINTAINERS (Write After Approval): Add self.
154 2009-05-07 Joel Brobecker <brobecker@adacore.com>
156 * gdbarch.h (target_gdbarch): Add comment documenting this global.
158 2009-05-06 Joel Brobecker <brobecker@adacore.com>
160 * acinclude.m4 (AM_ICONV): Prefer in-tree libiconv if present over
162 * configure: Regenerate.
164 2009-05-06 Joel Brobecker <brobecker@adacore.com>
166 * utils.c: Add include of gdb_usleep.h.
167 (defaulted_query): Detect false EOF conditions that happen
168 on terminals opened with the O_NONBLOCK flag when there is
171 2009-05-06 Pedro Alves <pedro@codesourcery.com>
173 * inferior.c (add_inferior): Move observer_notify_new_inferior
175 (add_inferior_silent): ... here.
177 2009-05-06 Pierre Muller <muller.u-strasbg.fr>
178 Pedro Alves <pedro@codesourcery.com>
180 * procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)
181 (procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New
183 (procfs_stopped_by_watchpoint): Made static, ptid argument
185 (_initialize_procfs): Register new watchpoint related target
187 * config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT)
188 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT)
189 (HAVE_CONTINUABLE_WATCHPOINT): Delete.
190 (target_insert_watchpoint, target_remove_watchpoint): Delete.
191 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
193 * config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT)
194 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
195 (target_insert_watchpoint, target_remove_watchpoint): Delete.
196 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
198 * config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
199 (HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete.
200 (target_insert_watchpoint, target_remove_watchpoint): Delete.
201 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
204 2009-05-06 Hui Zhu <teawater@gmail.com>
206 * i386-tdep.c (i386_process_record): Change bzero to memset.
208 2009-05-06 Hui Zhu <teawater@gmail.com>
210 * NEWS: Add item for process record and replay.
212 2009-05-05 Maxim Grigoriev <maxim2405@gmail.com>
214 * xtensa-tdep.c (xtensa_frame_cache): Use pc instead of cache->pc.
216 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
218 * inferior.h (read_pc, write_pc): Remove.
219 * regcache.c (read_pc, write_pc): Remove.
221 * infrun.c (displaced_step_fixup): Use regcache_read_pc instead
223 (handle_inferior_event): Use regcache_read_pc instead of read_pc
224 when determining value of stop_pc. Replace subsequent uses of
225 read_pc by inspecting already-retrieved stop_pc value.
226 (keep_going): Use regcache_read_pc instead of read_pc.
228 * breakpoint.c (watchpoint_check): Use current frame architecture
229 and PC instead of current_gdbarch and read_pc ().
230 * tracepoint.c (set_traceframe_context): Replace PC argument
232 (trace_start_command, finish_tfind_command): Update calls.
233 (finish_tfind_command): Compare frame IDs to identify transitions
235 (trace_find_pc_command): Use regcache_read_pc instead of read_pc.
236 * rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
237 of gdbarch. Use regcache_read_pc and regcache_write_pc instead
238 of read_pc and write_pc.
239 (store_register): Make regcache argument non-const. Update call
240 to exec_one_dummy_insn.
242 * thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
243 * infcmd.c (post_create_inferior): Likewise.
244 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
245 * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
246 * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
247 * solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
248 * linux-fork.c (fork_load_infrun_state): Likewise.
249 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
250 * record.c (record_wait): Likewise.
251 * procfs.c (procfs_wait): Likewise.
252 * remote-mips.c (common_open, mips_wait): Likewise.
253 * remote-m32r-sdi.c (m32r_resume): Likewise.
255 * symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
256 * monitor.c (monitor_create_inferior, monitor_load): Likewise.
257 * m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
258 * remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
259 * remote-mips.c (mips_create_inferior, mips_load): Likewise.
261 * solib-darwin.c: Include "regcache.h".
262 * solib-pa64.c: Include "regcache.h".
263 * solib-svr4.c: Include "regcache.h.".
265 * symfile.c: Do not mention read_pc or write_pc in comments.
266 * dink32-rom.c: Likewise.
267 * m32r-rom.c: Likewise.
268 * mips-tdep.c: Likewise.
270 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
272 * fork-child.c (startup_inferior): Move setting stop_pc ...
273 * infcmd.c (post_create_inferior): ... to here.
275 2009-05-04 Michael Snyder <msnyder@vmware.com>
277 * NEWS: Add item for reverse debugging commands.
279 2009-05-04 Pedro Alves <pedro@codesourcery.com>
281 * go32-nat.c (go32_stop): Delete.
282 (go32_kill_inferior): Rewrite to only call go32_mourn_inferior.
283 (go32_create_inferior): Don't call go32_stop or
285 (go32_mourn_inferior): Inline go32_stop and go32_kill_inferior
287 (init_go32_ops): Don't register go32_stop.
289 2009-05-02 Eli Zaretskii <eliz@gnu.org>
291 * dbxread.c (read_dbx_symtab): Avoid compiler warnings for
294 * infcall.c (find_function_addr): Avoid compiler warnings for
297 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
299 * dictionary.c (dict_hashed_vector, dict_hashed_expandable_vector)
300 (dict_linear_vector, dict_linear_expandable_vector): Fix a comment typo.
302 2009-05-01 Doug Evans <dje@google.com>
304 * linux-thread-db.c (thread_db_pid_to_str): Delete unused assignment
307 2009-05-01 Eli Zaretskii <eliz@gnu.org>
309 * record.c (_initialize_record): Reformat and clarify doc strings
310 for stop-at-limit and insn-number-max.
312 * go32-nat.c: Add comments about dirty secrets of DJGPP debugging.
314 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
316 Make specifiable the make_function_type type memory ownership.
317 * gdbtypes.c (make_function_type): New parameter `objfile', use it
318 explicitely instead of TYPE-initialized removed local variable
319 `objfile'. Describe `objfile' it in the function comment.
320 (lookup_function_type): Update make_function_type callers.
321 * gdbtypes.h (make_function_type): Update the prototype.
322 * jv-lang.c (java_link_class_type): Update make_function_type callers.
323 * dwarf2read.c (read_subroutine_type): Likewise.
324 * stabsread.c (read_type): Likewise.
326 2009-05-01 Eli Zaretskii <eliz@gnu.org>
328 * go32-nat.c (go32_pid_to_str): Call normal_pid_to_str instead of
329 printing a bogus "Thread <main>".
330 (go32_thread_alive): Don't return 1 for null_ptid.
332 * i386-tdep.c (i386_go32_init_abi): Override the number of
333 registers due to non-support of SSE.
335 2009-04-30 Anthony Green <green@moxielogic.com>
337 * configure.tgt: Link the moxie simulator in with gdb.
339 2009-04-30 Paul Pluzhnikov <ppluzhnikov@google.com>
341 * elfread.c (elf_symtab_read): Don't assume .data and .rodata
344 2009-04-30 Hui Zhu <teawater@gmail.com>
345 Michael Snyder <msnyder@vmware.com>
347 I386 Linux process record and replay support.
349 * i386-linux-tdep.c (i386_linux_record_tdep): New variable.
350 This struct has the argument for the function
351 "record_linux_system_call".
352 (i386_linux_intx80_sysenter_record): New function. Parse the
353 system call instruction and call function
354 "record_linux_system_call" to record execute log.
355 (i386_linux_init_abi): Initialize "i386_linux_record_tdep".
356 Set "i386_linux_intx80_sysenter_record" to
357 "i386_intx80_record" and "i386_sysenter_record".
359 2009-04-30 Hui Zhu <teawater@gmail.com>
360 Michael Snyder <msnyder@vmware.com>
362 I386 architecture process record and replay support.
364 * i386-tdep.c (PREFIX_REPZ, PREFIX_REPNZ, PREFIX_LOCK,
365 PREFIX_DATA, PREFIX_ADDR): New macros. Help decode the i386
367 (aflag, dflag, override, modrm, mod, reg, rm, ot,
368 i386_record_pc): New variables. Ditto.
369 (i386_record_modrm, i386_record_lea_modrm_addr,
370 i386_record_lea_modrm): New functions. Ditto.
371 (i386_process_record): New function. Parse the instruction in
372 address "addr" and record the values of registers and memory
373 that will be changed by this instruction.
374 (i386_gdbarch_init): Set "i386_process_record" to GDBARCH
375 "process_record" interface.
376 * i386-tdep.h (gdbarch_tdep): New function pointers
377 "i386_intx80_record" and "i386_sysenter_record" that point to
378 the function that can record "intx80" and "sysenter" execute
381 2009-04-30 Hui Zhu <teawater@gmail.com>
382 Michael Snyder <msnyder@vmware.com>
384 * infrun.c (use_displaced_stepping): Return false if process
385 record and replay target is used.
386 (proceed): Call function "record_not_record_set" if pocess
387 record and replay target is used.
389 2009-04-30 Hui Zhu <teawater@gmail.com>
390 Michael Snyder <msnyder@vmware.com>
392 Linux process record and replay support.
394 * Makefile.in (ALLDEPFILES): Add linux-record.c.
395 (ALL_TARGET_OBS): Add linux-record.o.
396 * configure.tgt (x86_64-*-linux*): Add linux-record.o.
397 (i[34567]86-*-linux*): Add linux-record.o.
398 * linux-record.c, linux-record.h: New file.
400 2009-04-30 Hui Zhu <teawater@gmail.com>
401 Michael Snyder <msnyder@vmware.com>
403 Process record and replay target.
405 * Makefile.in (SFILES): Add record.c.
406 (COMMON_OBS): Add record.o.
407 * record.c, record.h: New file.
409 2009-04-30 Hui Zhu <teawater@gmail.com>
410 Michael Snyder <msnyder@vmware.com>
412 * target.h (strata): New stratum "record_stratum".
414 2009-04-30 Hui Zhu <teawater@gmail.com>
415 Michael Snyder <msnyder@vmware.com>
417 GDBARCH interface for process record and replay.
419 * gdbarch.sh (process_record): This interface point to the
420 function that records the inferior execute log.
422 2009-04-29 Doug Evans <dje@google.com>
424 * i386-nat.c (child_post_startup_inferior): Delete, unused.
426 2009-04-29 Pedro Alves <pedro@codesourcery.com>
428 * breakpoint.c (print_exception_catchpoint): Access `b' directly
429 instead of `b->loc->owner'.
430 (print_mention_exception_catchpoint): Ditto.
432 2009-04-29 Jan Kratochvil <jan.kratochvil@redhat.com>
434 * macrocmd.c (info_macro_command): Print -Dname=value if LINE is zero.
436 2009-04-27 Tom Tromey <tromey@redhat.com>
438 * c-exp.y (yylex): Handle '[' and ']' like '(' and ')'.
440 2009-04-27 Jerome Guitton <guitton@adacore.com>
442 * symtab.c (append_exact_match_to_sals): New function, extracted
443 from expand_line_sal.
444 (expand_line_sal): Use append_exact_match_to_sals to append exact
445 matches. If none found, append all best items.
447 2009-04-27 Jerome Guitton <guitton@adacore.com>
449 * main.c (captured_main): Move gdbinit lookups after gdb_init.
451 2009-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
454 * dwarf2read.c (unsigned_int_compar, inherit_abstract_dies): New.
455 (read_func_scope): Call inherit_abstract_dies.
457 2009-04-25 Eli Zaretskii <eliz@gnu.org>
459 * Makefile.in (ALLDEPFILES): Remove duplicate entries for
460 sparc-sol2-nat.c and sparc-sol2-tdep.c.
462 * stack.c (_initialize_stack) <disassemble-next-line>: Doc fix.
464 2009-04-24 Pierre Muller <muller.u-strasbg.fr>
466 ARI change: Use "/* ARI: rule */" pattern.
467 * utils.c: Update ARI patterns.
468 * gdb_dirent.h: Likewise.
470 2009-04-23 Anthony Green <green@moxielogic.com>
472 * MAINTAINERS: Add moxie target.
473 * configure.tgt: Add moxie-*-elf target.
474 * moxie-tdep.c: New file.
475 * moxie-tdep.h: New file.
477 2009-04-23 Joel Brobecker <brobecker@adacore.com>
479 * ada-lang.c: Remove an extra empty line. No code change.
481 2009-04-23 Jan Kratochvil <jan.kratochvil@redhat.com>
483 Fix double free on error inserting the breakpoint instruction.
484 * breakpoint.c (create_breakpoints): Move the
485 update_global_location_list call to ...
486 (break_command_really): ... here together with the second local call
487 both unified after all the cleanups.
489 2009-04-23 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
490 Tom Tromey <tromey@redhat.com>
492 * configure, config.in: Regenerate.
493 * configure.ac: Support for relocatable GDB datadir. Use
494 GDB_AC_WITH_DIR. Always define TARGET_SYSTEM_ROOT_RELOCATABLE.
495 * acinclude.m4 (GDB_AC_WITH_DIR): New defun.
496 * top.c (init_main): Add "set data-directory".
497 * defs.h (gdb_datadir): Declare.
498 * main.c (gdb_datadir): New global.
499 (captured_main): Initialize gdb_datadir. Use relocate_directory.
500 (relocate_path): New function.
501 (relocate_directory): Likewise.
502 (get_init_files): Use relocate_path.
503 (README): Mention --with-gdb-datadir.
505 2009-04-23 Joel Brobecker <brobecker@adacore.com>
507 * ada-tasks (task_command_1): Call target_find_new_threads.
509 2009-04-23 Joel Brobecker <brobecker@adacore.com>
511 * stack.c (do_gdb_disassembly): Print the exception message if an
512 error was thrown while trying to perform the disassembly.
514 2009-04-22 Jan Kratochvil <jan.kratochvil@redhat.com>
516 * varobj.c (free_variable): Replace free_current_contents by xfree.
518 2009-04-22 Kazu Hirata <kazu@codesourcery.com>
520 * arm-linux-nat.c (fetch_register, store_register): Use
521 ARM_CPSR_GREGNUM instead of ARM_CPSR_REGNUM.
522 * arm-linux-tdep.c (arm_linux_supply_gregset,
523 arm_linux_collect_gregset): Likewise.
524 * arm-linux-tdep.h (ARM_CPSR_GREGNUM): New.
525 * arm-tdep.h (ARM_CPSR_REGNUM): Remove.
527 2009-04-22 Hui Zhu <teawater@gmail.com>
529 * stack.c (_initialize_stack): Set the default of
530 disassemble-next-line to off.
532 2009-04-21 Tom Tromey <tromey@redhat.com>
534 * acinclude.m4: Use AS_HELP_STRING, not AC_HELP_STRING.
535 * configure.ac: Use AS_HELP_STRING, not AC_HELP_STRING.
537 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
539 * configure.ac: Add quotes to not lose brackets in help text.
540 * configure: Rebuild.
542 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
544 * configure.ac: Don't postprocess Makefile in config.status.
545 Substitute GDB_NM_FILE. Don't substitute nm_h.
546 * Makefile.in (GDB_NM_FILE): Substitute.
547 (TAGS): Use $(GDB_NM_FILE) instead of $(NAT_FILE).
548 * configure: Regenerate.
549 * gnulib/Makefile.in: Regenerate.
551 2009-04-21 Joseph Myers <joseph@codesourcery.com>
553 * configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
554 --with-htmldir): New.
555 * configure: Regenerate.
557 2009-04-21 Tom Tromey <tromey@redhat.com>
559 * configure: Rebuild.
560 * configure.ac: Use lower case for start of help strings. Clean
561 up --with-sysroot help.
563 2009-04-21 Tom Tromey <tromey@redhat.com>
565 * configure: Rebuild.
566 * acinclude.m4 (AM_ICONV): Use AC_HELP_STRING.
567 * configure.ac: Use AC_HELP_STRING. Use upper case for variables
570 2009-04-21 Pierre Muller <muller.u-strasbg.fr>
572 ARI fix: remove "%p".
573 * ia64-tdep.c (ia64_frame_this_id): Use host_address_to_string function.
574 (ia64_sigtramp_frame_this_id): Ditto.
575 (ia64_libunwind_frame_this_id): Ditto.
576 (ia64_libunwind_sigtramp_frame_this_id): Ditto.
577 * symmisc.c (maintenance_info_psymtabs): Ditto.
579 2009-04-21 Joseph Myers <joseph@codesourcery.com>
581 * configure.ac (--with-relocated-sources): New.
582 * configure, config.in: Regenerate.
583 * source.c (add_substitute_path_rule): Remove static.
584 * source.h (add_substitute_path_rule): Declare.
585 * main.c: Include "source.h".
586 (captured_main): Add substitution rule if RELOC_SRCDIR.
588 2009-04-21 Pierre Muller <muller.u-strasbg.fr>
590 * gnu-nat.h (proc_debug): Add missing continuation line in macro.
592 2009-04-20 David Daney <ddaney@caviumnetworks.com>
594 * NEWS: Mention MIPS/Linux hardware watchpoint support.
596 2009-04-20 David Daney <ddaney@caviumnetworks.com>
598 * mips-linux-nat.c (command.h, gdbcmd.h, gdb_assert.h): New #includes.
599 (maint_show_dr, super_close): New variables.
600 (super_fetch_registers, super_store_registers): Make static.
601 (PTRACE_GET_WATCH_REGS, PTRACE_SET_WATCH_REGS, W_BIT, R_BIT, I_BIT)
602 (W_MASK, R_MASK, I_MASK, IRW_MASK, MAX_DEBUG_REGISTER): Define.
603 (pt_watch_style): Define new enum.
604 (mips32_watch_regs, mips64_watch_regs, pt_watch_regs, mips_watchpoint):
606 (watch_readback_valid, watch_readback, current_watches, watch_mirror):
608 (get_irw_mask, get_reg_mask, get_num_valid, get_watchlo)
609 (set_watchlo, get_watchhi, set_watchhi, mips_show_dr)
610 (mips_linux_read_watch_registers, mips_linux_can_use_hw_breakpoint)
611 (mips_linux_stopped_by_watchpoint, mips_linux_stopped_data_address)
612 (type_to_irw, fill_mask, try_one_watch)
613 (mips_linux_region_ok_for_hw_watchpoint, write_watchpoint_regs)
614 (mips_linux_new_thread, populate_regs_from_watches)
615 (mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
616 (mips_linux_close): New functions.
617 (_initialize_mips_linux_nat): Register watchpoint functions with
618 the target_ops. Add show-debug-regs maintenance command.
620 2009-04-20 David Daney <ddaney@caviumnetworks.com>
622 * infrun.c (handle_inferior_event): Move gegisters_changed call down.
624 2009-04-19 Pedro Alves <pedro@codesourcery.com>
626 * NEWS: Mention gdbserver support for x86 Windows CE.
628 2009-04-19 Eli Zaretskii <eliz@gnu.org>
630 * config/djgpp/fnchange.lst: Fix typos.
632 Set default host and target charsets in the DJGPP port.
634 * config/djgpp/config.sed (am_cv_langinfo_codeset)
635 (bash_cv_langinfo_codeset, ac_cv_header_nl_types_h): Set to "yes"
636 in all configure scripts that define ac_cv_env_CPP_value.
638 * go32-nat.c (dos_codepage, nl_langinfo): New functions.
641 * config/djgpp/nl_types.h: New file.
643 * config/djgpp/langinfo.h: New file.
645 * config/i386/go32.mh (MH_CFLAGS): Add $(srcdir)/config/djgpp.
647 2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
649 * Makefile.in (MAKEHTML): Set to makeinfo --html.
650 (MAKEHTMLFLAGS): Set to empty.
652 2009-04-18 Eli Zaretskii <eliz@gnu.org>
654 * NEWS: Mention all new set/show commands added since GDB 6.8 was
657 * go32-nat.c (go32_sysinfo): Check if the call to
658 __dpmi_get_capabilities fills the buffer with information, and
659 don't use the buffer if not.
661 2009-04-17 Tom Tromey <tromey@redhat.com>
663 * charset.c (_initialize_charset): Add special case for "646".
665 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
667 * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
668 * configure: Regenerate.
669 * Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
670 configure substitutions.
671 (FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.
673 2009-04-17 Pierre Muller <muller.u-strasbg.fr>
675 ARI fix: Do not use %p, replace by call to host_address_to_string
677 * darwin-nat.c (darwin_xfer_partial): Apply change.
678 * gnu-nat.c (inf_continue, gnu_xfer_memory): Ditto.
679 * gnu-nat.h (proc_debug): Ditto.
680 * symmisc.c (maintenance_info_symtabs): Ditto.
681 (maintenance_info_psymtabs): Ditto.
682 * windows-nat.c (handle_load_dll): Ditto.
683 (handle_unload_dll, info_w32_command, handle_exception): Ditto.
684 * xtensa-tdep.c (xtensa_unwind_pc): Ditto.
686 2009-04-17 Joseph Myers <joseph@codesourcery.com>
688 * configure.tgt (i[34567]86-*-linux*): Use 64-bit configuration if
690 (sparc-*-linux*): Likewise.
692 2009-04-17 Eli Zaretskii <eliz@gnu.org>
694 * go32-nat.c (go32_sysinfo): Update list of Windows versions of
697 2009-04-16 Pedro Alves <pedro@codesourcery.com>
699 * remote.c (remote_query_attached): Fix pasto in packet_ok result
702 2009-04-16 Joel Brobecker <brobecker@adacore.com>
704 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
705 Revert the previous change. Might not be correct, actually.
707 2009-04-16 Joel Brobecker <brobecker@adacore.com>
709 * ada-lang.h (ada_adjust_exception_stop, ada_print_exception_stop)
710 (ada_get_current_task, ada_print_exception_breakpoint_nontask)
711 (ada_print_exception_breakpoint_task, ada_reset_thread_registers):
712 Remove declaration. These are non-existent functions.
714 2009-04-16 Joel Brobecker <brobecker@adacore.com>
716 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
717 Fix a compilation warning on mips-irix due to casting from
718 a pointer of different size.
720 2009-04-16 Joel Brobecker <brobecker@adacore.com>
722 * ada-lang.c (symtab_for_sym): Delete.
723 (user_select_syms): Use sym->symtab instead of calling symtab_for_sym.
725 2009-04-16 Joel Brobecker <brobecker@adacore.com>
727 * ada-lang.c (extract_string): Delete.
728 (ada_main_name): Reimplement using target_read_string instead of
731 2009-04-16 Andreas Schwab <schwab@linux-m68k.org>
733 * m68klinux-nat.c: Remove obsolete comment.
734 (fetch_register, store_register): Don't call
735 gdbarch_cannot_fetch_register or gdbarch_cannot_store_register,
736 which are always nops here.
738 2009-04-14 Tom Tromey <tromey@redhat.com>
740 * c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING.
741 (c_printstr): Likewise.
742 * charset.c: Include gdb_wait.h.
743 (make_wchar_iterator): Use INTERMEDIATE_ENCODING.
744 (find_charset_names): Use pexecute. Handle libiconv's output.
746 (_initialize_charset): Use xstrdup.
747 * gdb_wchar.h: Check HAVE_BTOWC. Split PHONY_ICONV and wchar
749 (INTERMEDIATE_ENCODING): New define.
750 * configure, config.in: Rebuild.
751 * configure.ac: Check for btowc.
753 2009-04-15 Tom Tromey <tromey@redhat.com>
755 * c-lang.c (evaluate_subexp_c): Correctly handle EVAL_SKIP.
757 2009-04-15 Eli Zaretskii <eliz@gnu.org>
759 * utils.c (parse_escape): Initialize target_char to pacify GCC.
761 2009-04-14 Jan Kratochvil <jan.kratochvil@redhat.com>
763 * c-lang.c (c_get_string): Fix xfree crash on a failed string read.
765 2009-04-14 Pierre Muller <muller@ics.u-strasbg.fr>
767 ARI fix: sprintf rule.
768 * ada-exp.y (convert_char_literal): Replace sprintf by xsnprintf.
769 * ada-lang.c (add_angle_brackets): Use xstrprintf.
770 (ada_decode): Replace sprintf by xsnprintf.
771 (find_old_style_renaming_symbol): Ditto.
772 (ada_to_fixed_type_1, ada_enum_name): Ditto.
775 2009-04-14 Joel Brobecker <brobecker@adacore.com>
777 * target.c (target_mourn_inferior): Call bfd_cache_close_all
778 after having executed the target mourn_inferior routine.
780 2009-04-14 Eli Zaretskii <eliz@gnu.org>
782 * config/djgpp/djconfig.sh (DEPDIR): Define to "_deps", if
785 2009-04-13 David Daney <ddaney@caviumnetworks.com>
787 * infrun.c (maybe_software_singlestep): New function.
788 (resume): Call maybe_software_singlestep.
789 (handle_inferior_event): Same.
791 2009-04-13 Tom Tromey <tromey@redhat.com>
793 * python/python-frame.c (frapy_richcompare): Return
794 Py_NotImplemented, not an error. Handle Py_NE as well.
796 2009-04-13 Eli Zaretskii <eliz@gnu.org>
798 * charset.c (EILSEQ): Define if not defined by system headers.
800 2009-04-11 Eli Zaretskii <eliz@gnu.org>
802 * config/djgpp/config.sed: Tweak ac_config_files in intl/configure
803 to be consistent with renaming config.intl.in into config_intl.in.
805 * go32-nat.c (go32_attach, go32_detach): Fix prototypes to be
806 consistent with the change from 2008-11-09.
808 2009-04-10 Jan Kratochvil <jan.kratochvil@redhat.com>
810 * gdbtypes.c: Remove excessive parentheses at the return keywords.
811 * varobj.c (varobj_invalidate): Fix indentation.
812 * varobj.c (varobj_invalidate): Fix formatting text width.
814 2009-04-08 Vladimir Prus <vladimir@codesourcery.com>
816 Implement -exec-jump.
818 * mi/mi-cmds.h (mi_cmd_exec_jump): Declare.
819 * mi/mi-main.c (mi_cmd_exec_jump): New.
820 * mi/mi-cmds.c (mi_cmds): Register exec-jump.
822 2009-04-07 Doug Evans <dje@google.com>
824 * symfile.c (symbol_file_clear): Fix indentation.
826 2009-04-06 Mark Kettenis <kettenis@gnu.org>
828 * sparc64nbsd-nat.c (sparc64nbsd_supply_pcb): Fix comment.
830 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
832 * ppc-linux-nat.c (ppc_linux_target_wordsize): New function.
833 (ppc_linux_auxv_parse): New function.
834 (ppc_linux_read_description): Use ppc_linux_target_wordsize.
835 (_initialize_ppc_linux_nat): Install ppc_linux_auxv_parse.
837 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
839 * spu-linux-nat.c (spu_bfd_open): Set filename of in-memory
840 BFD to contents of SPU name note.
841 (spu_symbol_file_add_from_memory): Call symbol_file_add_from_bfd
842 with "from_tty" argument 1 instead of 0.
844 2009-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
847 (new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
848 Create the symbol in local scope.
849 * symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.
851 2009-04-02 Keith Seitz <keiths@redhat.com>
853 * stabsread.c (read_member_functions): GCC may emit an extra space
854 at the end of the names "__base_ctor" and "__base_dtor"; so ignore
855 whitespace when looking for these functions.
857 2009-04-01 Joel Brobecker <brobecker@adacore.com>
859 Change the default value for "set print frame-arguments" to scalars.
861 * stack.c (print_frame_arguments): Set initial value to "scalars".
863 2009-04-01 Aleksandar Ristovski <aristovski@qnx.com>
865 * mips-tdep.c (mips_numeric_register_alieses): New definition.
866 (mips_gdbarch_init): Add user registers from
867 mips_numeric_register_aliases.
869 2009-04-01 Joel Brobecker <brobecker@adacore.com>
871 * linux-nat.c (linux_nat_filter_event): Minor comment reformatting.
873 2009-04-01 Joel Brobecker <brobecker@adacore.com>
875 * linux-nat.c (linux_nat_filter_events): Do not delete the lwp if
876 this is the last one.
878 2009-04-01 Pedro Alves <pedro@codesourcery.com>
880 * remote.c (append_resumption): New.
881 (remote_vcont_resume): Use it.
883 2009-04-01 Joel Brobecker <brobecker@adacore.com>
885 * windows-nat.c (+windows_get_ada_task_ptid): New function.
886 (init_windows_ops): Set windows_ops.to_get_ada_task_ptid.
888 2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
889 Keith Seitz <keiths@redhat.com>
890 Jan Kratochvil <jan.kratochvil@redhat.com>
893 * Makefile.in (dbxread.o): Update.
894 * dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
895 * dwarf2read.c (GDB_FORM_cached_string): New.
896 (read_partial_die): Use dwarf2_canonicalize_name.
897 (dwarf2_linkage_name): Use dwarf2_name.
898 (dwarf2_canonicalize_name): New.
899 (dwarf2_name): Use dwarf2_canonicalize_name.
900 (dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
901 * stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
902 * symtab.c (lookup_symbol_in_language): Canonicalize input before
904 * cp-name-parser.y: operator() requires two parameters,
905 according to libiberty.
906 * minsyms.c (lookup_minimal_symbol): Canonicalize input
910 2009-03-31 Joel Brobecker <brobecker@adacore.com>
912 Provide support for (Ada) task-specific breakpoints.
914 * ada-lang.h (ada_get_task_number): Add declaration.
915 (breakpoint_ada_task_match): Delete declaration.
916 * ada-tasks.c (ada_get_task_number): Make non-static.
917 * breakpoint.h (struct breakpoint): Add field "task".
918 * breakpoint.c (print_one_breakpoint_location): Add handling of
919 task-specific breakpoints.
920 (create_breakpoint, create_breakpoints, find_condition_and_thread):
921 New parameter "task".
922 (break_command_really): Update calls to find_condition_and_thread
923 and create_breakpoints.
924 (breakpoint_re_set_one): Update call to find_condition_and_thread.
927 2009-03-31 Joel Brobecker <brobecker@adacore.com>
929 * ada-tasks.c (short_task_info): Eliminate the "Running" task state.
931 2009-03-31 Pedro Alves <pedro@codesourcery.com>
933 * remote.c (remote_notice_new_inferior): Use ptid_is_pid. Check
934 if the thread's ptid without a thread id field is in the list
935 before calling thread_change_ptid.
936 (extended_remote_attach_1): In non-stop mode, do not rely on
937 querying the current thread, instead, query the thread list, and
938 select the first thread of the process.
939 * gdbthread.h (first_thread_of_process): Declare.
940 * thread.c (first_thread_of_process): Define.
942 2009-03-30 Stan Shebs <stan@codesourcery.com>
944 Make tracepoints into a type of breakpoint.
945 * breakpoint.h (enum bptype): Add bp_tracepoint.
946 (struct breakpoint): Add fields step_count, pass_count, actions.
947 (get_tracepoint, get_tracepoint_by_number): Declare.
948 (all_tracepoints): Declare.
949 * breakpoint.c: Include tracepoint.h, readline.h.
950 (ALL_TRACEPOINTS): Move here from tracepoint.c.
951 (tracepoint_count): Ditto.
952 (should_be_inserted): GDB does not insert tracepoints itself.
953 (print_it_typical): Add tracepoint case.
954 (bpstat_what): Ditto.
955 (print_one_breakpoint_location): Ditto, and add printing for
956 pass count, step count, and action list.
957 (user_settable_breakpoint): Add tracepoint case.
958 (allocate_bp_location): Ditto.
959 (set_breakpoint_location_function): Ditto.
960 (disable_breakpoints_in_shlibs): Ditto.
962 (break_command_really): Add argument traceflag, use to choose
963 basic breakpoint type.
964 (break_command_1): Pass extra argument.
965 (set_breakpoint, handle_gnu_v3_exceptions): Ditto.
966 (breakpoint_re_set_one): Add tracepoint case.
967 (disable_command, enable_command): Ditto.
968 (set_tracepoint_count): Move here from tracepoint.c.
969 (trace_command): Move here from tracepoint.c and use
970 break_command_really.
971 (tracepoints_info): Move here from tracepoint.c and call
973 (enable_trace_command): Move here from tracepoint.c and call
975 (disable_trace_command): Move here from tracepoint.c and call
977 (delete_trace_command): Move here from tracepoint.c and call
979 (trace_pass_command): Move here from tracepoint.c.
980 (get_tracepoint_by_number): Ditto.
981 (tracepoint_save_command): Ditto.
982 (get_tracepoint): New function.
983 (all_tracepoints): New function.
984 (_initialize_breakpoint): Move tracepoint init from tracepoint.c,
985 deprecate "enable trace" and "disable trace" commands.
986 * tracepoint.h (struct tracepoint): Remove.
987 (tracepoint_chain): Remove decl.
988 (deprecated_create_tracepoint_hook): Remove decl.
989 (deprecated_delete_tracepoint_hook): Remove decl.
990 (deprecated_modify_tracepoint_hook): Remove decl.
991 (ALL_TRACEPOINTS, ALL_TRACEPOINTS_SAFE): Remove.
992 (free_actions): Update signature.
993 (validate_actionline): Update signature.
994 (end_actions_pseudocommand): Declare.
995 (while_stepping_pseudocommand): Declare.
996 * tracepoint.c: Include breakpoint.h.
997 (tracepoint_chain, tracepoint_count): Remove.
998 (free_actions, make_cleanup_free_actions): Update signature.
999 (trace_command, set_raw_tracepoint): Remove.
1000 (trace_mention): Remove.
1001 (tracepoints_info): Remove.
1002 (tracepoint_operation, map_args_over_tracepoints): Remove.
1003 (get_tracepoint_by_number): Remove.
1004 (enable_trace_command, disable_trace_command): Remove.
1005 (delete_trace_command, trace_pass_command): Remove.
1006 (trace_actions_command, read_actions): Update signature.
1007 (validate_actionline): Update signature, use bp loc.
1008 (encode_actions): Ditto.
1009 (download_tracepoint): New function, body of trace_start_command.
1010 (trace_start_command): Call it, use all_tracepoints.
1011 (tracepoint_save_command): Remove.
1012 (tracepoint_dump_command): Use get_tracepoint.
1013 (end_actions_pseudocommand): Make globally visible.
1014 (while_stepping_pseudocommand): Ditto.
1015 (_initialize_tracepoint): Move command definitions to breakpoint.c.
1017 2009-03-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
1019 Expose frames to Python.
1020 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-frame.o.
1021 (SUBDIR_PYTHON_SRCS): Add python-frame.c.
1022 (python-frame.o): New target.
1023 * python/python-frame.c: New file.
1024 * python/python-internal.h (gdbpy_frames, gdbpy_newest_frame,
1025 gdbpy_frame_stop_reason_string, gdbpy_selected_frame,
1026 gdbpy_initialize_frames): New prototypes.
1027 * python/python.c (_initialize_python): Call gdbpy_initialize_frames.
1028 (GdbMethods): Add `selected_frame' and `frame_stop_reason_string'
1030 * stack.c (find_frame_funname): New function, factored out of
1032 (print_frame): Call find_frame_funname.
1033 * stack.h (find_frame_funname): Add prototype.
1035 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
1037 Remove unused value_object attribute `owned_by_gdb'.
1038 * python/python-value.c (value_object): Remove owned_by_gdb
1040 (valpy_dealloc): Remove reference to self->owned_by_gdb.
1041 (valpy_new): Likewise.
1042 (value_to_value_object): Likewise.
1044 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
1046 Change gdb.Value.address from a method to an attribute.
1047 * python/python-value.c (value_object): Add `address' element.
1048 (valpy_dealloc): Decrement reference to self->address if set.
1049 (valpy_new): Initialize val_obj->address.
1050 (valpy_address): Rename to ...
1051 (valpy_get_address): ... this. Change signature from method to
1052 attribute. Update self->address if not set.
1053 (value_to_value_object): Initialize val_obj->address.
1054 (value_object_getset): Add `address' element.
1055 (value_object_methods): Remove `address' element.
1057 2009-03-29 Andreas Schwab <schwab@linux-m68k.org>
1059 * observer.sh: Set LANG/LC_ALL to C, not c.
1061 2009-03-28 Kevin Buettner <kevinb@redhat.com>
1063 * mn10300-tdep.c (mn10300_gdbarch_init): For mn10300, by default,
1066 2009-03-28 Pedro Alves <pedro@codesourcery.com>
1068 * remote.c (remote_stop_ns): If multi-process extensions are off,
1069 and GDB is requesting the whole process to stop, sent "vCont;t",
1072 2009-03-28 Pedro Alves <pedro@codesourcery.com>
1074 * inf-loop.c (inferior_event_handler): Avoid calling is_running on
1077 2009-03-27 Eli Zaretskii <eliz@gnu.org>
1079 * config/djgpp/fnchange.lst: Update to fix ARI-reported problems.
1081 2009-03-26 Doug Evans <dje@google.com>
1083 * thread.c (do_restore_current_thread_cleanup): Redo test for
1084 whether to restore old->inferior_ptid.
1086 2009-03-26 Tom Tromey <tromey@redhat.com>
1088 * breakpoint.c (resolve_sal_pc): Preserve original line number
1089 when skipping prologue.
1091 2009-03-26 Doug Evans <dje@google.com>
1093 * thread.c (inferior_thread) Remove "extern" in definition.
1095 2009-03-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
1097 Add gdb.Value.is_optimized_out attribute.
1098 * python/python-value.c (valpy_get_is_optimized_out): New
1100 (value_object_getset): New variable.
1101 (value_object_type): Initialize tp_getset element.
1103 2009-03-26 Joel Brobecker <brobecker@adacore.com>
1105 Recognize missing DW_AT_location as <value optimized out>.
1107 (new_symbol <DW_TAG_variable> <!DW_AT_location> <!DW_AT_external>):
1108 Call add_symbol_to_list.
1110 2009-03-25 Tom Tromey <tromey@redhat.com>
1112 * gdbtypes.h (CHECK_TYPEDEF): Don't yield a value.
1113 * stack.c (print_this_frame_argument_p): Use check_typedef.
1115 2009-03-25 Tom Tromey <tromey@redhat.com>
1117 * configure: Rebuild.
1118 * acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
1119 Rearrange flags setting. Add comments.
1121 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1123 * config/i386/nm-i386.h: Remove code within
1124 I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
1125 * config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
1127 * config/i386/nm-cygwin64.h: Ditto.
1128 * config/i386/nm-fbsd.h: Ditto.
1129 * config/i386/nm-go32.h: Ditto.
1130 * config/i386/nm-linux.h: Ditto.
1131 * config/i386/nm-linux64.h: Ditto.
1133 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1135 ARI fix: "xasprintf" rule.
1136 * printcmd.c (sym_info): Replace xasprintf by xstrprintf.
1138 2009-03-25 Pedro Alves <pedro@codesourcery.com>
1140 * remote.c (remote_start_remote): In non-stop mode, call
1141 init_wait_for_inferior before adding threads and inferiors.
1143 2009-03-25 Joel Brobecker <brobecker@adacore.com>
1145 * breakpoint.c (breakpoint_thread_match): Split a large condition
1146 into several smaller conditions. No behavior change.
1148 2009-03-25 Pedro Alves <pedro@codesourcery.com>
1150 * infrun.c (infrun_thread_thread_exit): New.
1151 (_initialize_infrun): Attach it to the thread_exit observer.
1152 * thread.c (delete_thread_1): Always call the observer, passing it
1154 * mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
1155 SILENT, return immediately.
1157 2009-03-25 Pedro Alves <pedro@codesourcery.com>
1159 * infrun.c (normal_stop): Use has_stack_frames instead of
1161 * mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
1162 when there is no thread selected.
1163 (mi_cmd_execute): Don't special case commands that can run without
1164 a valid selected thread.
1165 * top.c (execute_command): Don't special case commands that can
1166 run without a valid selected thread. Use has_stack_frames.
1167 * infcmd.c (ensure_valid_thread): New.
1168 (continue_1, step_1, jump_command, signal_command): Use it.
1169 (detach_command): Error out if there's no selected thread/inferior.
1170 * thread.c (print_thread_info): Allow having no thread selected.
1171 (switch_to_thread): Don't read the PC if there is no current thread.
1172 (do_restore_current_thread_cleanup): Don't record the current
1173 frame if there is no current thread.
1174 (make_cleanup_restore_current_thread): Don't read frame info if
1175 there is no selected thread.
1176 (_initialize_thread): Don't mark commands as
1177 "no_selected_thread_ok".
1178 * frame.c (get_current_frame): Error out if there is no valid
1180 (has_stack_frames): Return false if there is no valid
1182 * cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
1183 "no_selected_thread_ok".
1184 * cli/cli-decode.c (set_cmd_no_selected_thread_ok)
1185 (get_cmd_no_selected_thread_ok): Delete.
1186 * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
1187 (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
1189 * stack.c (get_selected_block): Use has_stack_frames.
1191 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
1193 Fix size of FPSCR in Power 7 processors.
1194 * ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
1195 (PPC_FEATURE_HAS_DFP): New #define.
1196 (ppc_linux_read_description): Check for DFP feature instead of
1197 ISA 2.05 to decide on size of the FPSCR.
1199 2009-03-25 Kevin Buettner <kevinb@redhat.com>
1201 * mn10300-tdep.c (trad-frame.h): Don't include.
1202 (prologue-value.h): Include.
1203 (mn10300_frame_unwind_cache, set_reg_offsets): Delete.
1204 (struct mn10300_prologue): Define.
1205 (push_reg, translate_rreg, check_for_saved): New functions.
1206 (mn10300_analyze_prologue): Rewrite, using prologue-value
1207 machinery. Handle more instructions than before. Permit
1208 instructions to occur in any order.
1209 (mn10300_skip_prologue): Find the extents of the function
1210 in question; mn10300_analyze_prologue no longer does this.
1211 (mn10300_analyze_frame_prologue): New function.
1212 (mn10300_frame_base): New function.
1213 (mn10300_frame_this_id): Rewrite, no longer using trad-frame
1215 (mn10300_frame_prev_register): Likewise.
1216 (mn10300_frame_base_address, mn10300_frame_base struct): Delete.
1217 (mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
1219 (mn10300_frame_unwind_init): Don't call frame_base_set_default().
1221 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1223 Fix completer problem for filename completion on the first try.
1225 * gdb/completer.h (gdb_completion_word_break_characters): New function.
1226 * gdb/completer.c: Include gdb_assert.h.
1227 (complete_line_internal_reason): New enum.
1228 (complete_line_internal): Change last argument type to
1229 complete_line_internal_reason.
1230 Modify function to handle the different complete_line_internal_reason
1232 (complete_line): Adapt to change in complete_line_internal.
1233 (command_completer): Ditto.
1234 (gdb_completion_word_break_characters): Implement new function.
1235 * top.c (init_main): Set rl_completion_word_break_hook to
1236 gdb_completion_word_break_characters.
1239 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1241 ARI fix: "strlen d_name" rule.
1242 * linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
1245 2009-03-24 Tom Tromey <tromey@redhat.com>
1246 Pedro Alves <pedro@codesourcery.com>
1248 * configure, config.in: Rebuild.
1249 * configure.ac: Check for libiconvlist.
1250 * charset.c: Check HAVE_LIBICONVLIST.
1251 * acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
1252 LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
1253 * Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
1255 (INTERNAL_CFLAGS_BASE): Update.
1256 (INTERNAL_LDFLAGS): Update.
1259 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1261 * configure.ac: Initialize the variable $PREFER_CURSES.
1262 * configure: Regenerated.
1264 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1266 * configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
1267 * configure: Regenerated.
1269 2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
1271 ARI fix: "strerror" rule.
1272 * darwin-nat.c (darwin_ptrace): Use safe_strerror.
1273 (darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
1275 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1277 * ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
1278 before looking up the fields inside our struct type.
1280 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1282 * ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
1283 trying to resolve the type qualification.
1285 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1287 * ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
1288 we try to apply the attribute on the real type, rather than
1289 its associated typedef.
1291 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1293 * ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
1294 to make sure we try to get the modulus of the actual type, not the
1297 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1299 * ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
1300 [OP_ATR_LENGTH]: When using the attribute on a type, make sure
1301 to get the real type, not the associated typedef.
1303 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1305 * ada-lang.c (ada_get_field_index): Add handling of the case
1306 when TYPE is a typedef of a struct.
1308 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1310 Add gdb_usleep as a portable version of usleep based on gdb_select.
1311 * gdb_usleep.h, gdb_usleep.c: New files.
1312 * Makefile.in (SFILES): Add gdb_usleep.c.
1313 (HFILES_NO_SRCDIR): Add gdb_usleep.h.
1314 (COMMON_OBS): Add gdb_usleep.o.
1315 * ser-unix.c (hardwire_send_break): Replace call to gdb_select
1316 by call to gdb_usleep.
1318 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1320 * buildsym.c (end_symtab): If we ignore the subfiles, then
1321 unlink the associated symtabs if they were already allocated.
1323 2009-03-23 Jerome Guitton <guitton@adacore.com>
1325 Provide a way to force building of GDB with libcurses.
1326 * configure.ac: Add --with-curses.
1327 * configure: Regenerated.
1329 2009-03-23 Tom Tromey <tromey@redhat.com>
1331 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
1334 2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
1336 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
1337 solib_contains_address_p instead of searching.
1339 2009-03-23 Tom Tromey <tromey@redhat.com>
1341 * charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
1342 (iconv): Make 'inbuf' argument const.
1343 (convert_between_encodings): Use ICONV_CONST.
1344 (wchar_iterate): Likewise.
1346 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
1348 * windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
1349 dynamically loaded function.
1350 (LookupPrivilegeValueA): Ditto.
1351 (OpenProcessToken): Ditto.
1352 (AdjustTokenPrivileges): Rename and define placeholder for address of
1353 dynamically loaded function.
1354 (LookupPrivilegeValueA): Ditto.
1355 (OpenProcessToken): Ditto.
1356 (set_process_privilege): Remove check for loaded functions.
1357 (bad_OpenProcessToken): Define.
1358 (_initialize_loadable): Load token functions from advapi here, setting
1359 OpenProcessToken function to a dummy static function which always return
1360 error if OS doesn't support this functionality.
1362 2009-03-22 Nicolas Roche <roche@adacore.com>
1363 Christopher Faylor <me+cygwin@cgf.cx>
1365 * win32-nat.c (ctrl_c_handler): New function.
1366 (win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
1367 is run in a separate console.
1369 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
1371 * windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
1372 for dynamically loaded function.
1373 (DebugBreakProcess): Ditto.
1374 (DebugSetProcessKillOnExit): Ditto.
1375 (EnumProcessModules): Ditto.
1376 (GetModuleFileNameExA): Ditto.
1377 (GetModuleInformation): Ditto.
1378 (DebugActiveProcessStop): Rename and define placeholder for address of
1379 dynamically loaded function.
1380 (DebugBreakProcess): Ditto.
1381 (DebugSetProcessKillOnExit): Ditto.
1382 (EnumProcessModules): Ditto.
1383 (GetModuleFileNameExA): Ditto.
1384 (GetModuleInformation): Ditto.
1385 (psapi_loaded): Delete.
1386 (get_module_name): Don't check psapi_loaded, just rely on the fact that
1387 dynamically loaded functions will return failure if they weren't
1389 (has_detach_ability): Delete.
1390 (windows_attach): Remove call to has_detach_ability (). Just rely on
1391 functions being callable.
1392 (bad_DebugActiveProcessStop): Define.
1393 (bad_DebugBreakProcess): Ditto.
1394 (bad_DebugSetProcessKillOnExit): Ditto.
1395 (bad_EnumProcessModules): Ditto.
1396 (bad_GetModuleFileNameExA): Ditto.
1397 (bad_GetModuleInformation): Ditto.
1398 (_initialize_loadable): Rename from _initialize_psapi. Initialize all
1399 dynamic storage here, setting nonexistent functions to dummy static
1400 functions which always return error.
1402 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1404 * mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
1405 to the about_to_proceed observer notification.
1406 (mi_about_to_proceed): New.
1407 (mi_on_resume): Only output ^running and the prompt here if the
1408 target was proceeded.
1409 * breakpoint.c (breakpoint_proceeded): New static.
1410 (breakpoint_about_to_proceed): New.
1411 (_initialize_breakpoints): Attach breakpoint_about_to_proceed to
1412 the about_to_proceed observer notification.
1413 * inferior.h (breakpoint_proceeded): Delete declaration.
1414 * infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
1415 Notify the about_to_proceed observers.
1416 (struct inferior_status): Delete breakpoint_proceeded member.
1417 (save_inferior_status): Don't save it.
1418 (restore_inferior_status): Don't restore it.
1419 * mi-main.h (mi_proceeded): Declare.
1420 * mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
1423 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1425 * gdbthread.h (struct thread_info): Add in_infcall member.
1426 * infcall.c (run_inferior_call): Save, set and restore in_infcall.
1427 Remove reverences to suppress_resume_observer. Refresh
1428 `call_thread' after returning from `proceed'.
1429 * infcmd.c (suppress_resume_observer): Delete.
1430 * inferior.h (suppress_resume_observer): Delete declaration.
1431 * mi/mi-interp.c (mi_on_resume): Suppress output while calling an
1433 * thread.c (set_running): Remove references to
1434 suppress_resume_observer.
1435 * infrun.c (struct inferior_status): Add in_infcall member.
1436 (save_inferior_status): Save it.
1437 (restore_inferior_status): Restore it.
1439 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1441 * infcall.c (run_inferior_call): Remove references to
1442 suppress_stop_observer.
1443 * infcmd.c (suppress_stop_observer): Delete.
1444 (finish_command_continuation): Remove NOTE. Don't clear
1445 suppress_stop_observer anymore.
1446 (finish_command_continuation_free_arg): Likewise.
1447 (finish_forward): Remove references to suppress_stop_observer.
1448 Call normal_stop observer if we haven't already.
1449 * inferior.h (suppress_stop_observer): Delete.
1450 * infrun.c (normal_stop): When deciding to suppress the
1451 normal_stop observer, check for proceed_to_finish instead of
1452 suppress_stop_observer.
1454 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1456 * symfile.c (symfile_relocate_debug_section): Remove check for
1459 2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
1460 Jim Blandy <jimb@red-bean.com>
1461 Thiago Jung Bauermann <bauerman@br.ibm.com>
1462 Tom Tromey <tromey@redhat.com>
1464 Miscellaneous fixes to the Python code.
1465 * python/python-cmd.c (cmdpy_init): Accept keyword
1467 * python/python-value.c (valpy_string): Accept keyword
1469 (valpy_binop): Use `break' to exit from the TRY_CATCH block.
1470 Do not call value_to_value_object on NULL RES_VAL.
1471 (value_object_methods): Change `string' entry to also accept
1473 (convert_value_from_python): Return a copy of the value if obj is
1475 (value_object_methods): Mark the `string' method as accepting
1476 keywords, and show method "prototype" in the doc string.
1477 * python/python.c (get_parameter): Don't return inside a
1480 2009-03-20 Tom Tromey <tromey@redhat.com>
1482 Add support for convenience functions in Python.
1483 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
1484 (SUBDIR_PYTHON_SRCS): Add python-function.c.
1485 (python-function.o): New target.
1486 * eval.c: Include "python/python.h" and <ctype.h>.
1487 (evaluate_subexp_standard): Handle values of type
1488 TYPE_CODE_INTERNAL_FUNCTION.
1489 * gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
1490 * parse.c (write_exp_string): Remove duplicate word in comment.
1491 * python/python-function.c: New file.
1492 * python/python-internal.h (gdbpy_initialize_functions): Add
1494 * python/python.c (_initialize_python): Call
1495 gdbpy_initialize_functions.
1496 * valprint.c (value_check_printable): Handle values of type
1497 TYPE_CODE_INTERNAL_FUNCTION.
1498 * value.c: Include "cli/cli-decode.h".
1499 (internal_function): New struct.
1500 (functionlist, internal_fn_type): New static variables.
1501 (lookup_only_internalvar,
1502 lookup_internalvar): Add const qualifier to name argument.
1503 (create_internalvar): Likewise. Initialize new field.
1504 (set_internal_var): Fix typo in comment. Don't allow assignment
1505 to canonical variable.
1506 (value_create_internal_function, value_internal_function_name,
1507 call_internal_function, function_command, function_destroyer,
1508 add_internal_function): New functions.
1509 (_initialize_values): Create `function' placeholder command.
1510 Initialize internal_fn_type.
1511 * value.h (lookup_only_internalvar, create_internalvar,
1512 lookup_internalvar): Add const qualifier to name argument.
1513 (internal_function_fn, add_internal_function, call_internal_function,
1514 value_internal_function_name): Add prototypes.
1515 (struct internalvar) <canonical>: New field.
1517 2009-03-20 Tom Tromey <tromey@redhat.com>
1519 * c-lang.c (evaluate_subexp_c): Call check_typedef.
1521 2009-03-20 Tom Tromey <tromey@redhat.com>
1522 Julian Brown <julian@codesourcery.com>
1524 PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
1525 PR i18n/9401, PR exp/9613:
1527 * value.h (value_typed_string): Declare.
1528 (val_print_string): Update.
1529 * valprint.h (print_char_chars): Update.
1530 * valprint.c (print_char_chars): Add type argument. Update.
1531 (val_print_string): Likewise.
1532 * valops.c (value_typed_string): New function.
1533 * utils.c (host_char_to_target): New function.
1534 (parse_escape): Use host_char_to_target, host_hex_value. Update.
1536 (no_control_char_error): Remove.
1537 * typeprint.c (print_type_scalar): Update.
1538 * scm-valprint.c (scm_scmval_print): Update.
1539 * scm-lang.h (scm_printchar, scm_printstr): Update.
1540 * scm-lang.c (scm_printchar): Add type argument.
1541 (scm_printstr): Likewise.
1542 * printcmd.c (print_formatted): Update.
1543 (print_scalar_formatted): Update.
1544 (printf_command) <wide_string_arg, wide_char_arg>: New constants.
1545 Handle '%lc' and '%ls'.
1546 * parser-defs.h (struct typed_stoken): New type.
1547 (struct stoken_vector): Likewise.
1548 (write_exp_string_vector): Declare.
1549 * parse.c (write_exp_string_vector): New function.
1550 * p-valprint.c (pascal_val_print): Update.
1551 * p-lang.h (is_pascal_string_type, pascal_printchar,
1552 pascal_printstr): Update.
1553 * p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
1554 Add 'char_type' argument.
1555 (pascal_emit_char): Add type argument.
1556 (pascal_printchar): Likewise.
1557 (pascal_printstr): Likewise.
1558 * objc-lang.c (objc_emit_char): Add type argument.
1559 (objc_printchar): Likewise.
1560 (objc_printstr): Likewise.
1561 * macroexp.c (get_character_constant): Handle unicode characters.
1563 (get_string_literal): Handle unicode strings. Use
1565 * m2-valprint.c (print_unpacked_pointer): Update.
1566 (m2_print_array_contents): Update.
1567 (m2_val_print): Update.
1568 * m2-lang.c (m2_emit_char): Add type argument.
1569 (m2_printchar): Likewise.
1570 (m2_printstr): Likewise.
1571 * language.h (struct language_defn) <la_printchar>: Add type
1573 <la_printstr, la_emitchar>: Likewise.
1574 (LA_PRINT_CHAR): Likewise.
1575 (LA_PRINT_STRING): Likewise.
1576 (LA_EMIT_CHAR): Likewise.
1577 * language.c (unk_lang_emit_char): Add type argument.
1578 (unk_lang_printchar): Likewise.
1579 (unk_lang_printstr): Likewise.
1580 * jv-valprint.c (java_val_print): Update.
1581 * jv-lang.c (java_emit_char): Add type argument.
1582 * f-valprint.c (f_val_print): Update.
1583 * f-lang.c (f_emit_char): Add type argument.
1584 (f_printchar): Likewise.
1585 (f_printstr): Likewise.
1586 * expprint.c (print_subexp_standard): Update.
1587 * charset.h (target_wide_charset): Declare.
1588 (c_target_char_has_backslash_escape, c_parse_backslash,
1589 host_char_print_literally, host_char_to_target,
1590 target_char_to_host, target_char_to_control_char): Remove.
1591 (enum transliterations): New type.
1592 (convert_between_encodings): Declare.
1593 (HOST_ESCAPE_CHAR): New define.
1594 (host_letter_to_control_character, host_hex_value): Declare.
1595 (enum wchar_iterate_result): New enum.
1596 (struct wchar_iterator): Declare.
1597 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
1598 wchar_push_back): Declare.
1599 * charset-list.h: New file.
1600 * c-valprint.c (textual_name): New function.
1601 (textual_element_type): Handle wide character types.
1602 (c_val_print): Pass original type to textual_element_type. Handle
1603 wide character types.
1604 (c_value_print): Use textual_element_type. Pass original type of
1606 * c-lang.h (enum c_string_type): New type.
1607 (c_printchar, c_printstr): Update.
1608 * c-lang.c (classify_type): New function.
1609 (print_wchar): Likewise.
1610 (c_emit_char): Add type argument. Handle wide characters.
1611 (c_printchar): Likewise.
1612 (c_printstr): Add type argument. Handle wide and multibyte
1614 (convert_ucn): New function.
1615 (emit_numeric_character): Likewise.
1616 (convert_octal): Likewise.
1617 (convert_hex): Likewise.
1618 (ADVANCE): New macro.
1619 (convert_escape): New function.
1620 (parse_one_string): Likewise.
1621 (evaluate_subexp_c): Likewise.
1622 (exp_descriptor_c): New global.
1623 (c_language_defn): Use exp_descriptor_c.
1624 (cplus_language_defn): Likewise.
1625 (asm_language_defn): Likewise.
1626 (minimal_language_defn): Likewise.
1627 (charset_for_string_type): New function.
1628 * c-exp.y (%union): Add 'svec' and 'tsval'.
1630 (exp): Add CHAR production.
1631 (string_exp): Rewrite.
1632 (exp) <string_exp>: Rewrite.
1633 (tempbuf): Now global.
1634 (tempbuf_init): New global.
1635 (parse_string_or_char): New function.
1636 (yylex) <tempbuf>: Now global.
1637 <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
1639 Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
1640 (c_parse_escape): New function.
1641 * auxv.c (fprint_target_auxv): Update.
1642 * ada-valprint.c (ada_emit_char): Add type argument.
1643 (ada_printchar): Likewise.
1644 (ada_print_scalar): Update.
1645 (printstr): Add type argument. Update calls to ada_emit_char.
1646 (ada_printstr): Add type argument.
1647 (ada_val_print_array): Update.
1648 (ada_val_print_1): Likewise.
1649 * ada-lang.c (emit_char): Add type argument.
1650 * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
1652 * gdb_locale.h: Include langinfo.h.
1653 * charset.c (_initialize_charset): Set default host charset from
1654 the locale. Don't register charsets. Add target-wide-charset
1655 commands. Call find_charset_names.
1656 (struct charset, struct translation): Remove.
1657 (GDB_DEFAULT_HOST_CHARSET): Remove.
1658 (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
1659 (target_wide_charset_name): New global.
1660 (show_host_charset_name): Handle "auto".
1661 (show_target_wide_charset_name): New function.
1662 (host_charset_enum, target_charset_enum): Remove.
1663 (charset_enum): New global.
1664 (all_charsets, register_charset, lookup_charset, all_translations,
1665 register_translation, lookup_translation): Remove.
1666 (simple_charset, ascii_print_literally, ascii_to_control): Remove.
1667 (iso_8859_print_literally, iso_8859_to_control,
1668 iso_8859_family_charset): Remove.
1669 (ebcdic_print_literally, ebcdic_to_control,
1670 ebcdic_family_charset): Remove.
1671 (struct cached_iconv, check_iconv_cache, cached_iconv_convert,
1672 register_iconv_charsets): Remove.
1673 (target_wide_charset_be_name, target_wide_charset_le_name): New
1675 (identity_either_char_to_other): Remove.
1676 (set_be_le_names, validate): New functions.
1677 (backslashable, backslashed, represented): Remove.
1678 (default_c_target_char_has_backslash_escape): Remove.
1679 (default_c_parse_backslash, iconv_convert): Remove.
1680 (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
1681 ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
1682 iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
1683 ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
1684 ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
1685 ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
1686 (table_convert_char, table_translation, simple_table_translation):
1688 (current_host_charset, current_target_charset,
1689 c_target_char_has_backslash_escape_func,
1690 c_target_char_has_backslash_escape_baton): Remove.
1691 (c_parse_backslash_func, c_parse_backslash_baton): Remove.
1692 (host_char_to_target_func, host_char_to_target_baton): Remove.
1693 (target_char_to_host_func, target_char_to_host_baton): Remove.
1694 (cached_iconv_host_to_target, cached_iconv_target_to_host):
1696 (lookup_charset_or_error, check_valid_host_charset): Remove.
1697 (set_host_and_target_charsets): Remove.
1698 (set_host_charset, set_target_charset): Remove.
1699 (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
1700 (set_target_wide_charset_sfunc): New function.
1701 (show_charset): Print target wide character set.
1702 (host_charset, target_charset): Rewrite.
1703 (target_wide_charset): New function.
1704 (c_target_char_has_backslash_escape): Remove.
1705 (c_parse_backslash): Remove.
1706 (host_letter_to_control_character): New function.
1707 (host_char_print_literally): Remove.
1708 (host_hex_value): New function.
1709 (target_char_to_control_char): Remove.
1710 (cleanup_iconv): New function.
1711 (convert_between_encodings): New function.
1712 (target_char_to_host): Remove.
1713 (struct wchar_iterator): Define.
1714 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
1715 wchar_push_back): New functions.
1716 (do_cleanup_iterator): New function.
1717 (char_ptr): New typedef.
1718 (charsets): New global.
1719 (add_one, find_charset_names): New functions.
1720 (default_charset_names): New global.
1721 (auto_host_charset_name): Likewise.
1722 * aclocal.m4, config.in, configure: Rebuild.
1723 * configure.ac: Call AM_LANGINFO_CODESET.
1724 (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
1725 (AM_ICONV): Invoke earlier.
1726 * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
1727 LIBICONV_LIBDIR. Check for libiconv in build tree.
1728 * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
1729 (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
1730 (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
1731 * gdb_obstack.h (obstack_grow_wstr): New define.
1732 * gdb_wchar.h: New file.
1733 * defs.h: Include it.
1735 2009-03-20 Tom Tromey <tromey@redhat.com>
1736 Jan Kratochvil <jan.kratochvil@redhat.com>
1738 * dwarf2read.c (process_die): Handle DW_TAG_typedef.
1739 * eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
1741 * ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
1743 * ada-typeprint.c (print_array_type): Do the NULL check
1746 2009-03-19 Tom Tromey <tromey@redhat.com>
1748 * utils.c (do_obstack_free): New function.
1749 (make_cleanup_obstack_free): Likewise.
1750 * defs.h (make_cleanup_obstack_free): Declare.
1752 2009-03-18 Doug Evans <dje@google.com>
1754 * linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
1755 int, not a long long.
1756 (linux_nat_info_proc_cmd): Store pid in long instead of long long.
1758 * expprint.c (dump_raw_expression): Print note if non-NULL.
1760 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
1763 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
1765 * Makefile.in: Update license to GPLv3.
1766 * ada-exp.y: Update license to GPLv3.
1767 * ada-lex.l: Update license to GPLv3.
1768 * c-exp.y: Update license to GPLv3.
1769 * cp-name-parser.y: Update license to GPLv3.
1770 * darwin-nat-info.c: Update license to GPLv3.
1771 * f-exp.y: Update license to GPLv3.
1772 * gdb_thread_db.h: Update license to GPLv3.
1773 * hppanbsd-nat.c: Update license to GPLv3.
1774 * hppanbsd-tdep.c: Update license to GPLv3.
1775 * hppaobsd-tdep.c: Update license to GPLv3.
1776 * jv-exp.y: Update license to GPLv3.
1777 * m2-exp.y: Update license to GPLv3.
1778 * objc-exp.y: Update license to GPLv3.
1779 * p-exp.y: Update license to GPLv3.
1780 * reply_mig_hack.awk: Update license to GPLv3.
1781 * reverse.c: Update license to GPLv3.
1782 * xtensa-xtregs.c: Update license to GPLv3.
1784 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1786 * remote.c (remote_close): Don't call generic_mourn_inferior.
1787 (remote_mourn_1): Call generic_mourn_inferior after closing the
1790 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1792 * remote.c (remote_start_remote): Add missing call to
1793 init_wait_for_inferior in non-stop mode.
1795 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1797 * breakpoint.c (bpstat_should_step): Only consider software
1798 watchpoints that have a location.
1800 2009-03-17 Joel Brobecker <brobecker@adacore.com>
1802 Add a target_ops parameter to the to_kill method in struct target_ops.
1804 * target.h (struct target_ops): Add a "target_ops *" parameter to
1806 (target_kill): Remove macro. Add declaration.
1807 * target.c (debug_to_kill): Delete, no longer necessary.
1808 (target_kill): New function.
1809 (update_current_target): Stop inheriting the to_kill method.
1810 Do not de_fault it to no_process either.
1811 (setup_target_debug): Do not set current_target.to_kill.
1812 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
1813 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
1814 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
1817 2009-03-17 Doug Evans <dje@google.com>
1819 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
1820 glibc 2.3.2 and earlier.
1822 2009-03-17 Joel Brobecker <brobecker@adacore.com>
1824 * frame.c (get_prev_frame_1): Do not perform the inner_frame
1825 sanity check if this_frame is not NORMAL.
1826 (frame_id_inner): Update the description of this function.
1828 2009-03-17 Hui Zhu <teawater@gmail.com>
1830 * stack.c: Change the introduce of "disassemble-next-line".
1832 2009-03-17 Pedro Alves <pedro@codesourcery.com>
1834 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
1837 2009-03-17 Hui Zhu <teawater@gmail.com>
1839 * stack.c: Include valprint.h.
1840 (disassemble_next_line): New enum.
1841 (show_disassemble_next_line): New function. Show the current
1842 value of disassemble-next-line.
1843 (gdb_disassembly_stub_args): New struct for argument passing
1844 between function do_gdb_disassembly and function
1845 gdb_disassembly_stub.
1846 (gdb_disassembly_stub): New function. Helper for
1848 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
1849 the exception from the gdb_disassembly because it will be
1850 broken by filter sometime.
1851 (print_frame_info): If disassemble-next-line is set to auto
1852 or on and doesn't have the line debug messages for $pc,
1853 output the next instruction.
1854 If disassemble-next-line is set to on and there is line debug
1855 messages, output assembly codes for next line.
1856 (_initialize_stack): Make the "set disassemble-next-line"
1857 command an auto-boolean command. Change its class to
1858 class_stack. Place it in the top level set list. Extend help
1859 to describe the auto mode.
1861 2009-03-17 Pedro Alves <pedro@codesourcery.com>
1863 * infrun.c (normal_stop): Don't overwrite old_chain.
1865 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1867 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
1868 which is undefined, by call to regcache_invalidate, which should
1869 do what the original author wanted to do.
1871 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1873 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
1874 (mips_create_inferior): Likewise.
1876 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1878 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
1880 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1882 * darwin-nat.c (darwin_resume): Fix a compiler warning when
1883 building on x86_64-darwin.
1885 2009-03-16 Tristan Gingold <gingold@adacore.com>
1887 * configure.tgt: Add handling for x86_64-darwin.
1889 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1891 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
1893 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1895 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
1896 Use the ops parameter to get to the target beneath, rather than
1897 using the current_target global. Using the current_target global
1898 was an unintended accident.
1900 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1902 Fix an error happening while loading symbols from a core file
1905 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
1906 to detect whether we're debugging a core file or not.
1908 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1910 Modernize the aix-thread later by getting rid of the base_target
1911 global. This brings back to life the AIX port which was otherwise
1912 crashing all the time.
1914 * aix-thread.c (base_target): Delete.
1915 (pd_enable): Do not set base_target.
1916 (aix_thread_attach): Use find_target_beneath instead of base_target.
1917 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
1918 (aix_thread_fetch_registers, aix_thread_store_registers),
1919 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
1920 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
1921 (aix_thread_kill): Delete. Does not seem necessary.
1922 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
1924 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1926 * stack.c (return_command <retval_exp>): New variables retval_expr
1927 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
1928 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
1929 if RETURN_TYPE is NULL.
1931 2009-03-14 Pedro Alves <pedro@codesourcery.com>
1933 * remote.c (PACKET_qAttached): New.
1934 (remote_query_attached): New.
1935 (remote_add_inferior): Add new `attached' argument. Handle it.
1936 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
1937 -1 to remote_add_inferior in new parameter.
1938 (extended_remote_attach_1): Adjust to pass 1 to
1939 remote_add_inferior in the new parameter.
1940 (extended_remote_create_inferior_1): Adjust to pass 0 to
1941 remote_add_inferior in the new parameter.
1942 (_initialize_remote): Add "set/show remote query-attached-packet"
1945 2009-03-13 Tom Tromey <tromey@redhat.com>
1947 * symtab.c (lookup_symbol_in_language): Use a cleanup.
1949 2009-03-13 Doug Evans <dje@google.com>
1951 * exceptions.h: Clean up some comments on catch_exceptions usage.
1952 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
1955 2009-02-17 Joel Brobecker <brobecker@adacore.com>
1957 The following patch helps getting rid of a warning inside solib-som.c.
1959 * source.c (source_full_path_of): Constify parameter filename.
1960 * defs.h (source_full_path_of): Update declaration accordingly.
1962 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1964 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
1965 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
1966 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
1968 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1970 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
1971 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
1973 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1975 * ada-tasks.c (ada_task_is_alive): Move up and make static.
1976 * ada-lang.h (ada_task_is_alive): Remove declaration.
1978 2009-03-12 Jerome Guitton <guitton@adacore.com>
1980 * ada-lang.c (ada_delta): Change the type of numerators and
1981 denominators to DOUBLEST, as they may not fit into a long.
1982 (scaling_factor): Ditto.
1984 2009-03-12 Jerome Guitton <guitton@adacore.com>
1986 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
1988 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1990 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
1991 types, if we are unable to determine the actual symbol type
1992 from its tag, then use the static approximation instead.
1994 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1996 Fix crash printing packed record with packed array.
1998 * ada-lang.c (ada_modulus_from_name): New function.
1999 (ada_modulus): In the case where the type length is bigger than
2000 the size of the type used to hold the bounds, try determining
2001 the modulus from the type name.
2002 (ada_value_primitive_packed_val): Fix bug in the computation of
2003 ntarg causing an out-of-buffer invalid access.
2005 2009-03-12 Joel Brobecker <brobecker@adacore.com>
2007 Fix segfault when printing short_integer'last.
2009 * ada-lang.c (ada_find_any_type): Search in the primitive types
2010 if a symbol could not be found.
2012 2009-03-12 Joel Brobecker <brobecker@adacore.com>
2014 * ada-tasks.c (task_states,long_task_states): Add new states
2015 Activating and Acceptor_Delay_Sleep. Update the description
2016 of state Acceptor_Sleep.
2018 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
2020 Fix a build failure on Darwin following some changes in
2021 the profile of some target_ops methods.
2023 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
2025 (darwin_stop_inferior, darwin_detach): Likewise.
2027 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
2029 Include token in ^running notification for CLI commands.
2031 * mi/mi-main.c (mi_execute_command): Set current_token here.
2032 (mi_cmd_execute): Do not set current_token here.
2034 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
2038 * mi/mi-main.c (mi_print_timing_maybe): New.
2039 (captured_mi_execute_command): Simplify. Output timings to
2041 (mi_execute_async_cli_command): Do not print timings.
2042 * mi/mi-main.h (mi_print_timing_maybe): Declare.
2043 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
2045 2009-03-12 Jerome Guitton <guitton@adacore.com>
2047 * xcoffread.c (process_linenos): Check if the line in the
2048 include table refers to the main source file and, if so,
2049 add them to the main subfile.
2051 2009-03-12 Joel Brobecker <brobecker@adacore.com>
2053 Fix a build failure on AIX introduced after a change in the profile
2054 of some of the "methods" in the target_ops structure.
2055 * aix-thread.c: Add missing target_ops parameter throughout.
2057 Implement Ada task switching on AIX.
2058 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
2059 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
2061 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
2063 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
2064 value_mark and value_free_to_mark.
2065 * objfiles.c (free_objfile): Call objfile_free_data before
2068 2009-03-10 Hui Zhu <teawater@gmail.com>
2070 * disasm.c (gdb_disassembly): Remove unused argument
2072 * disasm.h (gdb_disassembly): Ditto.
2073 * cli/cli-cmds.c (print_disassembly): Ditto.
2074 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
2076 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
2078 * solib.c (solib_contains_address_p): New function.
2079 (solib_name_from_address): Use it.
2080 * printcmd.c (display_uses_solib_p): Use it.
2081 * solib.h (solib_contains_address_p): Declare it.
2083 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
2085 * varobj.c (free_variable): Call value_free.
2087 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
2090 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
2091 Move the variable `macinfo_type' out of the loop. Create a new
2092 processing pass before the current one to pre-create `current_file'.
2093 New complaint on misplaced zero/non-zero definitions/includes.
2094 Skip first DW_MACINFO_start_file with `at_commandline' set.
2096 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
2098 * solib.c (reload_shared_libraries): Give
2099 inferior a chance to reset solib breakpoint.
2102 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
2104 * windows-nat.c (dr): Redefine to use largest possible integer which
2106 (cygwin_set_dr): Avoid coercion.
2108 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
2110 * windows-nat.c (windows_create_inferior): Implement --tty handling on
2113 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
2115 Rename solib_address to solib_name_from_address.
2116 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
2117 (disable_breakpoints_in_unloaded_shlib): Update.
2118 * printcmd.c (display_uses_solib_p): Likewise.
2119 * stack.c (print_frame): Likewise.
2123 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
2125 * printcmd.c (do_one_display): Reparse exp_string.
2126 (display_uses_solib_p): New function.
2127 (clear_dangling_display_expressions): New function.
2128 (_initialize_printcmd): Add observer.
2129 * solib.c (no_shared_libraries): Swap order of calls to
2130 clear_solib and objfile_purge_solibs.
2132 2009-03-05 Joel Brobecker <brobecker@adacore.com>
2134 Implement the target-specific part of Ada tasking support
2137 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
2138 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
2140 2009-03-05 Joel Brobecker <brobecker@adacore.com>
2142 Get rid of the global "base_target" and use "find_target_beneath"
2143 to find the underlying target.
2144 * dec-thread.c (base_target): Delete.
2145 (enable_dec_thread): Remove assignement to base_target.
2146 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
2147 (dec_thread_fetch_registers, dec_thread_store_registers)
2148 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
2149 Update the function profile if necessary.
2150 Use find_target_beneath to call the same method but from
2151 the underlying target, removing the need for "base_target".
2153 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
2154 Fix a copy/paste error in a few debug traces...
2156 * solib-osf.c (init_so): Use a simpler method for computing
2157 the size of lm_info structure. This also gets rid of warning
2158 emitted by the compiler.
2160 2009-03-05 Pedro Alves <pedro@codesourcery.com>
2162 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
2163 duplicates of permanent breakpoints.
2165 2009-03-04 Pedro Alves <pedro@codesourcery.com>
2167 * inferior.h (notice_new_inferior): Declare.
2168 * infcmd.c (notice_new_inferior): New.
2169 * remote.c (remote_add_inferior, remote_add_thread): New.
2170 (notice_new_inferiors): Rename to...
2171 (remote_notice_new_inferior): ... this. Add RUNNING argument.
2172 Use remote_add_thread instead of add_thread, passing it the
2173 RUNNING argument. Add an inferior with remote_add_inferior. If
2174 we just learned about an inferior, call notice_new_inferior.
2175 (record_currthread): Adjust.
2176 (remote_threads_info): Adjust to use remote_notice_new_inferior.
2177 (remote_start_remote, extended_remote_attach_1): Use
2178 remote_add_inferior.
2179 (process_stop_reply): Adjust. Call remote_notice_new_inferior
2180 after handling expedited registers and watchpoint state.
2181 (extended_remote_create_inferior_1): Use remote_add_inferior.
2183 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
2185 * infcmd.c (registers_info): Remove register number case.
2187 2009-03-03 Pedro Alves <pedro@codesourcery.com>
2189 * top.c (quit_target): Check for target_has_execution before
2190 killing or detaching from inferiors.
2192 2009-03-02 Joel Brobecker <brobecker@adacore.com>
2194 Remove some unused routines.
2196 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
2198 * ada-lang.c (ada_task_list_iterator_ftype)
2199 (iterate_over_live_ada_tasks): Delete.
2200 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
2203 2009-03-01 Doug Evans <dje@google.com>
2205 * symtab.c: Remove trailing whitespace throughout the file.
2206 (expand_line_sal): Fix some typos and whitespace.
2208 * Makefile.in (clean): rm -f $(DEPDIR)/*.
2210 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
2211 (init.c): signals/ -> common/.
2212 (signals.o): Update.
2213 * target.h (target_signal_to_string,target_signal_to_string)
2214 (target_signal_from_name,target_signal_to_host_p)
2215 (target_signal_from_host,target_signal_to_host): Move to ...
2216 * common/gdb_signals.h: ... here. New file.
2217 * common/signals.c: Moved here from signals/signals.c.
2218 #include gdb_signals.h, remove #include of target.h in gdb case.
2219 (target_signal_from_command,default_target_signal_to_host)
2220 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
2222 Include thread ID in target_wait debugging output.
2223 * infrun.c (print_target_wait_results): New function.
2224 (wait_for_inferior,fetch_inferior_event): Call it.
2226 2009-02-27 Pedro Alves <pedro@codesourcery.com>
2228 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
2229 with a ptid_t field.
2230 * linux-thread-db.c (thread_get_info_callback): Build the ptid
2231 using the pid stored in proc_handle.ptid.
2232 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
2233 (check_for_thread_db, thread_db_detach, check_event)
2234 (thread_db_mourn_inferior, find_new_threads_callback)
2235 (thread_db_find_new_threads_1): Adjust.
2236 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
2237 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
2239 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
2241 * valprint.c (read_string): Rework clean-up logic. Use
2242 free_current_contents to clean-up buffer.
2244 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
2246 * MAINTAINERS: Update e-mail address.
2248 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
2250 * python/python-utils.c (python_string_to_unicode): Always return
2252 (python_string_to_target_string): Decrement transient python
2254 (python_string_to_host_string): Likewise.
2256 2007-02-26 Pedro Alves <pedro@codesourcery.com>
2258 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
2259 call to super_fetch_registers.
2260 (mips64_linux_store_registers): Pass `ops' to call to
2261 super_store_registers.
2263 2009-02-25 Doug Evans <dje@google.com>
2265 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
2268 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
2269 disabled_shlib_breaks, unused.
2271 * printcmd.c (build_address_symbolic): Fix comment.
2273 2009-02-25 Hui Zhu <teawater@gmail.com>
2275 * cli/cli-script.c (define_command): Add _() to query.
2276 * gnu-nat.c (inf_validate_task_sc): Ditto.
2277 * infcmd.c (kill_if_already_running): Ditto.
2278 (jump_command): Ditto.
2279 (attach_command): Ditto.
2280 * inflow.c (kill_command): Ditto.
2281 * infrun.c (handle_command): Ditto.
2282 * maint.c (maintenance_dump_me): Ditto.
2283 * memattr.c (mem_delete_command): Ditto.
2284 * monitor.c (monitor_interrupt_query): Ditto.
2285 * nto-procfs.c (interrupt_query): Ditto.
2286 * printcmd.c (undisplay_command): Ditto.
2287 * remote-mips.c (mips_kill): Ditto.
2288 * remote.c (interrupt_query): Ditto.
2289 * solib-irix.c (irix_open_symbol_file_object): Ditto.
2290 * solib-osf.c (osf_open_symbol_file_object): Ditto.
2291 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
2292 * solib-som.c (som_open_symbol_file_object): Ditto.
2293 * solib-svr4.c (open_symbol_file_object): Ditto.
2294 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
2295 * target.c (kill_or_be_killed): Ditto.
2296 * tracepoint.c (delete_trace_command): Ditto.
2297 * top.c (quit_confirm): Add _() to s that will be used
2300 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
2302 Fix windows-nat.c compilation failure.
2304 * windows-nat.c (windows_thread_alive): Fix forward declaration.
2305 (get_windows_debug_event): Add ops parameter to call to windows_resume.
2307 2009-02-23 Pedro Alves <pedro@codesourcery.com>
2309 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
2311 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
2313 * symtab.c (find_line_symtab): Initialize exact to avoid
2316 2009-02-23 Pedro Alves <pedro@codesourcery.com>
2318 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
2319 `ops' to recursive call.
2321 2009-02-23 Pedro Alves <pedro@codesourcery.com>
2323 * corelow.c (get_core_registers): Adjust.
2324 (core_file_thread_alive): Rename to...
2325 (core_thread_alive): ... this.
2326 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
2327 (init_core_ops): Adjust.
2328 (coreops_suppress_target): Delete.
2329 (_initialize_corelow): Unconditionally add core_ops.
2330 * procfs.c: Include "inf-child.h".
2331 (procfs_ops): Delete.
2332 (init_procfs_ops): Delete. Reimplement as...
2333 (procfs_target): ... this, inheriting from inf-child.
2334 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
2335 (procfs_prepare_to_store): Delete.
2336 (procfs_store_registers, procfs_resume): Adjust.
2337 (procfs_open): Delete.
2338 (procfs_suppress_run): Delete.
2339 (procfs_can_run): Delete.
2340 (procfs_mourn_inferior): Adjust.
2341 (procfs_init_inferior): Add target_ops parameter. Adjust.
2342 (procfs_create_inferior): Don't pass procfs_init_inferior to
2343 fork_inferior. Instead call it after fork_inferior returns.
2344 (procfs_find_new_threads): Adjust.
2345 (_initialize_procfs): Adjust to use procfs_target instead of
2347 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
2348 (lwp_to_thread): Use target_thread_alive.
2349 (sol_thread_open): Delete.
2350 (sol_thread_attach): Delete.
2351 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
2352 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
2353 to use find_target_beneath.
2354 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
2355 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
2356 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
2357 (check_for_thread_db): New.
2358 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
2359 (sol_thread_new_objfile): Call check_for_thread_db.
2360 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
2361 (sol_thread_can_run): Delete.
2362 (sol_thread_alive): Adjust to use find_target_beneath.
2363 (sol_thread_stop): Delete.
2364 (rw_common): Use target_write_memory or target_read_memory.
2365 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
2366 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
2367 (solaris_pid_to_str): Remove check for libthread_db initialization
2369 (sol_find_new_threads): Remove check for libthread_db
2370 initialization failing, or for an invalid inferior_ptid. Adjust
2371 to use find_target_beneath.
2372 (sol_core_open, sol_core_close, sol_core_detach,
2373 sol_core_files_info, sol_find_memory_regions,
2374 sol_make_note_section, ignore): Delete.
2375 (init_sol_thread_ops): Make it a thread_stratum target. Remove
2376 unneeded callback settings.
2377 (init_sol_core_ops): Delete.
2378 (_initialize_sol_thread): No longer call init_sol_core_ops, set
2379 procfs_suppress_run, or hack with core_ops.
2381 * target.h (struct target_ops): Add a target_ops * parameter to
2382 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
2383 and to_find_new_threads.
2384 (target_fetch_registers, target_store_registers)
2385 (target_thread_alive, target_find_new_threads): Redeclare as
2388 * target.c (update_current_target): Do not inherit or de_fault
2389 to_resume, to_fetch_registers, to_store_registers,
2390 to_thread_alive, to_find_new_threads.
2391 (target_resume): Adjust.
2392 (target_thread_alive, target_find_new_threads): New.
2393 (debug_to_resume, debug_to_fetch_registers): Delete.
2394 (target_fetch_registers): New.
2395 (debug_to_store_registers): Delete.
2396 (target_store_registers): New.
2397 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
2398 (setup_target_debug): Adjust.
2400 * gdbcore.h (core_ops): Delete declaration.
2402 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
2403 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
2404 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
2405 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
2406 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
2407 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
2408 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
2409 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
2410 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
2411 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
2412 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
2413 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
2414 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
2415 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
2417 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
2418 * gdbarch.h, gdbarch.c: Regenerate.
2420 * sol2-tdep.c: Include "inferior.h".
2421 (sol2_core_pid_to_str): New.
2422 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
2424 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
2425 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
2426 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
2427 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2429 2009-02-22 Doug Evans <dje@google.com>
2431 * exec.c (exec_file_attach): Fix comment.
2433 2009-02-22 Pedro Alves <pedro@codesourcery.com>
2435 Silence a few -Wmissing-prototypes warnings.
2438 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
2440 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
2441 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
2442 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
2443 (_initialize_amd64nbsd_tdep): ... this.
2444 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
2445 (_initialize_arm_linux_tdep): Declare.
2446 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
2447 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
2448 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
2449 * avr-tdep.c (avr_return_value): Make it static.
2450 (avr_frame_unwind_cache): Ditto.
2451 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
2452 (bsd_uthread_solib_loaded): Ditto.
2453 (bsd_uthread_solib_unloaded): Ditto.
2454 (bsd_uthread_target): Ditto.
2455 (_initialize_bsd_uthread): Declare.
2456 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
2457 (cris_frame_unwind_cache): Ditto.
2458 * frv-tdep.c (frv_return_value): Ditto.
2459 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
2460 (h8300h_use_struct_convention): Ditto.
2461 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
2463 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
2465 * hppabsd-tdep.c: Include hppabsd-tdep.h.
2466 (hppabsd_find_global_pointer): Make it static.
2467 * hppabsd-tdep.h: New.
2468 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
2469 (hppabsd_init_abi): Remove declaration.
2470 (_initialize_hppabsd_tdep): Remove declaration.
2471 (_initialize_hppanbsd_tdep): Declare.
2472 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
2473 (hppabsd_init_abi): Delete declaration.
2474 (hppaobsd_init_abi): Make it static.
2475 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
2476 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
2477 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
2478 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
2479 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
2480 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
2481 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
2482 (_initialize_m32c_tdep): Declare.
2483 * m32r-rom.c (_initialize_m32r_rom): Declare.
2484 * m32r-tdep.c (m32r_skip_prologue): Make it static.
2485 (m32r_return_value): Ditto.
2486 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
2487 (m68hc11_return_value): Ditto.
2488 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
2489 * m88k-tdep.c (m88k_frame_cache): Make it static.
2490 * mep-tdep.c (mep_gdb_print_insn): Ditto.
2491 (mep_return_value): Ditto.
2492 (_initialize_mep_tdep): Declare.
2493 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
2494 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
2495 (mips_linux_syscall_next_pc): Ditto.
2496 (_initialize_mips_linux_tdep): Declare.
2497 * mips-tdep.c (mips_single_step_through_delay): Make it static.
2498 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
2499 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
2500 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
2501 * mt-tdep.c (_initialize_mt_tdep): Declare.
2502 * nbsd-tdep.c: Include nbsd-tdep.h.
2503 * nto-tdep.c (find_load_phdr): Make it static.
2504 (_initialize_nto_tdep): Declare.
2505 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
2507 (_initialize_ppc_linux_tdep): Declare.
2508 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
2509 (m32r_insert_watchpoint, m32r_remove_watchpoint)
2510 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
2512 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
2513 * rs6000-nat.c: Include xcoffread.h.
2514 (find_toc_address): Don't extern declare get_toc_offset. Adjust
2515 to call xcoff_get_to_offset.
2516 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
2517 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
2518 (rs6000_skip_trampoline_code): Make static.
2519 * s390-tdep.c (s390_regset_from_core_section): Ditto.
2520 * sh-tdep.c (sh_register_reggroup_p): Ditto.
2521 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
2522 (_initialize_shnbsd_tdep): Declare.
2523 * solib-frv.c (displacement_from_map): Make static.
2524 (_initialize_frv_solib): Declare.
2525 * solib-irix.c (fetch_lm_info): Make static.
2526 (_initialize_irix_solib): Declare.
2527 * solib-som.c: Include solib-som.h.
2528 (som_solib_select): Line break.
2529 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
2530 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
2531 (_initialize_sparcnbsd_tdep): ... this.
2532 * spu-tdep.c (spu_software_single_step): Make it static.
2533 (_initialize_spu_tdep): Declare.
2534 * vax-tdep.c (vax_frame_cache): Make it static.
2535 * xcoffread.c: Include xcoffread.h.
2536 (get_toc_offset): Rename to ...
2537 (xcoff_get_toc_offset): ... this.
2538 (_initialize_xcoffread): Declare.
2540 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
2541 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
2543 (_initialize_xtensa_tdep): Declare.
2545 2008-02-21 Pedro Alves <pedro@codesorcery.com>
2547 Silence a few -Wmissing-prototypes warnings.
2550 * amd64-nat.c: Include "amd64-nat.h".
2551 * fork-child.c (_initialize_fork_child): Ditto.
2552 * gcore.c (_initialize_gcore): Ditto.
2553 * inf-ptrace.c: Include "inf-ptrace.h".
2554 (inf_ptrace_store_registers): Make it static.
2555 * linux-nat.c (linux_nat_terminal_ours): Make it static.
2556 (_initialize_linux_nat): Declare before definition.
2557 * linux-tdep.c: Include "linux-tdep.h".
2558 * linux-thread-db.c (_initialize_thread_db): Declare before
2560 * proc-service.c (_initialize_proc_service): Ditto.
2561 * remote.c (remote_send_printf): Make it static.
2562 * solib.c: Include "solib.h".
2563 * symfile-mem.c (_initialize_symfile_mem): Declare before
2565 * ada-lang.c (ada_la_decode, ada_match_name)
2566 (ada_suppress_symbol_printing, ada_is_array_type)
2567 (ada_value_ptr_subscript, ada_array_length)
2568 (ada_to_static_fixed_value): Make them static.
2569 (_initialize_ada_language): Declare before definition.
2570 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
2571 (ada_task_list_changed, ada_new_objfile_observer): Make them
2573 (_initialize_tasks): Declare before definition.
2574 * addrmap.c (_initialize_addrmap): Declare before definition.
2575 * auxv.c (default_auxv_parse): Make it static.
2576 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
2578 * breakpoint.c (remove_sal): Add line break.
2579 (expand_line_sal_maybe): Make it static.
2580 * cp-name-parser.y: Include "cp-support.h".
2581 * cp-valprint.c (cp_find_class_member): Make it static.
2582 * eval.c (value_f90_subarray): Ditto.
2583 * exceptions.c (print_any_exception): Ditto.
2584 * findcmd.c (_initialize_mem_search): Declare before definition.
2585 * frame.c (frame_observer_target_changed): Make it static.
2586 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
2587 * inf-child.c: Include "inf-child.h".
2588 * inferior.h (valid_inferior_id): Rename to ...
2589 (valid_gdb_inferior_id): ... this.
2590 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
2592 * jv-lang.c (java_language_arch_info): Make it static.
2593 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
2594 * osdata.c (info_osdata_command): Make it static.
2595 * regcache.c (regcache_observer_target_changed): Make it static.
2596 * reverse.c (_initialize_reverse): Declare before definition.
2597 * stabsread.c (cleanup_undefined_types_noname)
2598 (cleanup_undefined_types_1): Make them static.
2599 * symfile.c (place_section): Make it static.
2600 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
2601 * target-descriptions.c (_initialize_target_descriptions): Declare
2603 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
2604 (find_default_is_async_p, find_default_supports_non_stop): Make
2606 (target_supports_non_stop): Add prototype.
2607 (dummy_pid_to_str): Make it static.
2608 * utils.c (_initialize_utils): Declare before definition.
2609 * ada-exp.y (_initialize_ada_exp): Declare before definition.
2610 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
2611 * target.h (struct target_ops): Add a prototype to the
2612 to_can_execute_reverse callback.
2613 * macroscope.c (_initialize_macroscope): Declare before definition.
2614 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
2615 * python/python.c (_initialize_python): Declare before definition.
2616 * tui/tui-command.c: Include "tui/tui-command.h".
2617 * tui/tui-data.c (init_content_element, init_win_info): Make them
2619 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
2620 * tui/tui-interp.c (_initialize_tui_interp): Declare before
2622 * tui/tui-layout.c: Include "tui/tui-layout.h".
2623 (_initialize_tui_layout): Declare before definition.
2624 * tui/tui-regs.c: Include "tui/tui-regs.h".
2625 (tui_display_reg_element_at_line): Make it static.
2626 (_initialize_tui_regs): Declare before definition.
2627 * tui/tui-stack.c (_initialize_tui_stack): Declare before
2629 * tui/tui-win.c: Include "tui/tui-win.h".
2630 (_initialize_tui_win): Declare before definition.
2631 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
2632 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
2633 (tui_get_cmd_list): Add a prototype.
2634 * tui/tui-windata.c: Include tui-windata.h.
2635 * tui/tui-wingeneral.c (box_win): Make it static.
2636 * cli/cli-logging.c (show_logging_command): Make it static.
2637 (_initialize_cli_logging): Declare before definition.
2638 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
2641 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
2643 Extend use of i386_use_watchpoints to all i386 native files
2644 using hardware watchpoints.
2645 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
2646 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
2647 * windows-nat.c (init_windows_ops): Ditto.
2648 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
2649 * config/i386/nm-cygwin64.h: Ditto.
2650 * config/i386/nm-fbsd.h: Ditto.
2651 * config/i386/nm-go32.h: Ditto.
2653 2009-02-19 Joel Brobecker <brobecker@adacore.com>
2655 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
2657 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
2659 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
2660 (mi_interpreter_init): Register the above.
2661 * solib.c (clear_solib): Notify solib unload.
2662 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
2663 disable breakpoints on a.out targets.
2665 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
2667 * observer.c (observer_test_first_notification_function)
2668 (observer_test_second_notification_function)
2669 (observer_test_third_notification_function): Adjust prototype.
2671 2009-02-17 Pedro Alves <pedro@codesourcery.com>
2673 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
2674 (ALL_TARGET_OBS): Add dicos-tdep.o.
2675 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
2676 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
2678 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
2680 * dicos-tdep.h, dicos-tdep.c: New.
2681 * amd64-dicos-tdep.c: New.
2682 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
2683 inferior.h. Include dicos-tdep.h.
2684 (i386_dicos_init_abi): Call dicos_init_abi.
2685 (i386_dicos_bfd_has_symbol_p): Delete.
2686 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
2688 * NEWS: Mention x86-64 DICOS target support.
2690 2009-02-16 Doug Evans <dje@google.com>
2692 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
2693 All callers updated.
2694 (amd64_get_insn_details): Handle more 3-byte opcode insns.
2695 (amd64_breakpoint_p): Delete.
2696 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
2697 don't back up pc to the start of the int3.
2698 * i386-tdep.c: #include opcode/i386.h.
2699 (i386_skip_prefixes): New function.
2700 (i386_absolute_jmp_p): Constify argument.
2701 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
2702 (i386_breakpoint_p): Delete.
2703 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
2704 When fixing up after stepping an int3, don't back up pc to the start
2707 2009-02-16 Pedro Alves <pedro@codesourcery.com>
2709 * corelow.c (core_close): Don't hardcode the core's pid.
2710 (core_open): Find core threads before calling
2711 post_create_inferior.
2712 (add_to_thread_list, get_core_register_section): Take into account
2713 systems where the regset section names encode the pid of the
2716 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
2717 * gdbarch.h, gdbarch.c: Regenerate.
2719 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
2720 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2721 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
2722 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
2724 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
2726 Include frame information for *stopped due to CLI commands.
2728 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
2729 * infcmd.c (finish_command_continuation): Pass '1' for
2730 'print_frame' parameter to the observer.
2731 * infrun.c (normal_stop): Don't print mi-specific information
2732 here. Pass 'stop_print_frame' to the 'print_frame' parameter
2734 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
2735 If we need to print frame, and current uiout is not the MI one,
2738 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
2740 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
2741 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
2743 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2746 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
2747 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
2749 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
2751 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
2752 for DW_ATE_signed_char and DW_ATE_unsigned_char
2753 for pascal language.
2755 2009-02-11 Jim Meyering <meyering@redhat.com>
2756 Jan Kratochvil <jan.kratochvil@redhat.com>
2758 Avoid NULL dereference.
2759 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
2760 New variable func_type.
2762 2009-02-11 Pedro Alves <pedro@codesourcery.com>
2764 * gdbarch.c: Regenerate.
2766 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
2768 * p-lang.c (is_pascal_string_type): Fix comment.
2769 Determine exact size of char elements for GPC
2771 (pascal_printstr): Handle char width of 2 or 4.
2772 * p-valprint.c (pascal_val_print): Handle char
2775 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
2777 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
2778 inside the loop. Only call addrmap_set_empty if the compilation unit
2779 had DW_AT_high_pc and DW_AT_low_pc. Update call to
2780 scan_partial_symbols.
2781 (scan_partial_symbols): Take NEED_PC argument and pass it along with
2783 (add_partial_namespace): Take NEED_PC argument and pass it through.
2784 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
2787 2009-02-07 Pedro Alves <pedro@codesourcery.com>
2789 * NEWS: Mention inspecting extra signal information, $_siginfo,
2790 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
2792 2009-02-07 Pedro Alves <pedro@codesourcery.com>
2794 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
2797 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2799 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
2800 (compat_timer_t, compat_clock_t, struct compat_timeval)
2801 (compat_sigval_t, compat_siginfo_t): New types.
2802 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
2803 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
2804 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
2805 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
2806 (amd64_linux_siginfo_fixup): New.
2807 * linux-nat.c (linux_nat_siginfo_fixup): New.
2808 (siginfo_fixup): New.
2809 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
2810 siginfo layout expected by ptrace and the siginfo layout of the
2812 (linux_nat_set_siginfo_fixup): New.
2813 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
2815 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2817 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
2818 * infrun.c (siginfo_value_read, siginfo_value_write): New.
2819 (siginfo_value_funcs): New.
2820 (siginfo_make_value): New.
2821 (_initialize_infrun): Create the $_siginfo convenience variable.
2822 * gdbtypes.h (append_composite_type_field_aligned): Declare.
2823 * gdbtypes.c (append_composite_type_field): Rename to...
2824 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
2825 argument. Handle it.
2826 (append_composite_type_field): Rewrite on top of
2827 append_composite_type_field_aligned.
2828 * value.h (internalvar_make_value): New typedef.
2829 (struct internalvar) <make_value>: New field.
2830 (create_internalvar_type_lazy): Declare.
2831 * value.c (create_internalvar): Clear make_value.
2832 (create_internalvar_type_lazy): New.
2833 (value_of_internalvar): If make_value is set use it.
2834 (preserve_values): Skip internal variables that don't have a
2836 * gdbarch.sh (get_siginfo_type): New.
2837 * gdbarch.h, gdbarch.c: Regenerate.
2839 * linux-tdep.h, linux-tdep.c: New.
2840 * amd64-linux-tdep.c: Include "linux-tdep.h".
2841 (amd64_linux_init_abi): Register linux_get_siginfo_type and
2842 linux_get_siginfo_mapper.
2843 * i386-linux-tdep.c: Include "linux-tdep.h".
2844 (i386_linux_init_abi): Register linux_get_siginfo_type and
2845 linux_get_siginfo_mapper.
2846 * arm-linux-tdep.c: Include "linux-tdep.h".
2847 (i386_linux_init_abi): Register linux_get_siginfo_type and
2848 linux_get_siginfo_mapper.
2850 * linux-nat.c (linux_xfer_siginfo): New.
2851 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
2852 * remote.c (PACKET_qXfer_siginfo_read)
2853 (PACKET_qXfer_siginfo_write): New.
2854 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
2855 "qXfer:siginfo:write" features.
2856 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
2857 (_initialize_remote): Add "set/show remote read-siginfo-object"
2858 and "set/show remote write-siginfo-object" commands.
2860 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
2861 (HFILES_NO_SRCDIR): Add linux-tdep.h.
2862 (ALLDEPFILES): Add linux-tdep.c.
2864 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
2865 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
2868 2009-02-06 Jim Blandy <jimb@codesourcery.com>
2869 Daniel Jacobowitz <dan@codesourcery.com>
2870 Vladimir Prus <vladimir@codesourcery.com>
2871 Pedro Alves <pedro@codesourcery.com>
2873 * defs.h (enum lval_type): New value: lval_computed.
2874 * value.h (struct lval_funcs): New type.
2875 (allocate_computed_value, value_computed_funcs)
2876 (value_computed_closure): New declarations.
2877 * value.c (struct value): Add a structure to the location union
2878 for computed lvalues, containing 'funcs' and 'closure' members.
2879 (allocate_computed_value, value_computed_funcs)
2880 (value_computed_closure): New functions.
2881 (value_free): For computed lvalues, call the closure's
2882 'free_closure' function before freeing the value itself.
2883 (value_copy): If we're copying an lval_computed value, call the
2884 closure's 'copy_closure' function.
2885 (set_value_component_location): If the original value is a
2886 computed lvalue, then call the closure's 'copy_closure' function.
2887 (value_of_internalvar): If an internal variable's value is a
2888 computed lvalue, make retrieving its value produce an equivalent
2890 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
2891 their read function.
2892 (value_assign): Assign to computed lvalues by calling their write
2895 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2897 * linux-nat.c (linux_nat_wait): Adjust.
2898 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
2899 * linux-nat.h (thread_db_init): Delete declaration.
2900 * linux-thread-db.c (target_beneath): Delete.
2901 (thread_db_init): Delete.
2902 (thread_db_detach): Use find_target_beneath.
2903 (thread_db_wait): Adjust interface. Use find_target_beneath.
2904 (thread_db_mourn_inferior): Use find_target_beneath.
2905 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
2906 (thread_db_async_mask): Delete.
2907 (thread_db_pid_to_str): Adjust interface. Use
2908 find_target_beneath.
2909 (thread_db_get_thread_local_address): Adjust interface. Use
2910 find_target_beneath.
2911 (init_thread_db_ops): Delete references to delete functions.
2912 * target.c (update_current_target): Don't inherit or default
2913 to_wait. Don't inherit to_pid_to_str and
2914 to_get_thread_local_address.
2915 (target_translate_tls_address): Look for a pushed target that
2916 implements to_get_thread_local_address, and use it instead of
2917 checking for target_get_thread_local_address_p.
2918 (target_wait, target_pid_to_str): Reimplement as functions.
2919 (dummy_pid_to_str): New.
2920 (init_dummy_target): Register it.
2921 (debug_to_wait): Delete.
2922 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
2923 to_get_thread_local_address accept a pointer to struct target_ops.
2924 (target_wait): Delete macro, and declare as function.
2925 (target_pid_to_str): Likewise.
2926 (target_get_thread_local_address)
2927 (target_get_thread_local_address_p): Delete.
2928 (noprocess): Add NORETURN and ATTR_NORETURN tags.
2929 * inf-ptrace.c (inf_ptrace_wait): Adjust.
2930 (inf_ptrace_pid_to_str): New.
2931 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
2932 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
2933 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
2934 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
2936 * corelow.c (core_pid_to_str): Adjust.
2937 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
2938 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
2939 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
2940 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
2941 * hpux-thread.c (hpux_thread_wait): Adjust.
2942 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
2943 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
2944 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
2945 * procfs.c (procfs_pid_to_str): Adjust.
2946 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
2947 * remote-mips.c (mips_wait): Adjust.
2948 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
2949 * remote.c (remote_wait, remote_pid_to_str)
2950 (remote_get_thread_local_address): Adjust.
2951 * rs6000-nat.c (rs6000_wait): Adjust.
2952 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
2953 (sol_thread_wait, solaris_pid_to_str): Adjust.
2954 * spu-linux-nat.c (spu_child_wait): Adjust.
2955 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
2957 2009-02-06 Tom Tromey <tromey@redhat.com>
2959 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
2960 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
2961 (python-cmd.o): New target.
2962 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
2963 completer prototype.
2964 (add_cmd): Initialize destroyer member of cmd_list_element. Use
2965 make_symbol_completion_list_fn as completer.
2966 (delete_cmd): Call destroyer if one is set.
2967 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
2968 completer member. Add destroyer member.
2969 (set_cmd_completer): Add self parameter to
2970 completer prototype.
2971 * command.h (set_cmd_completer): Add cmd parameter to
2972 completer prototype.
2973 * completer.c (noop_completer, filename_completer,
2974 location_completer, expression_completer, command_completer): Adapt
2975 to new completer prototype.
2976 (complete_line_internal): Pass new parameter to completer function.
2977 * completer.h (noop_completer, filename_completer,
2978 location_completer, expression_completer, command_completer): Adapt
2979 prototypes to new completer prototype.
2980 * interps.c (interpreter_completer): Adapt to new completer
2982 * python/python-cmd.c: New file.
2983 * python/python-internal.h (gdbpy_initialize_commands): Add
2985 (gdbpy_doc_cst): Add forward declaration.
2986 * python/python.c (gdbpy_doc_cst): Declare.
2987 (_initialize_python): Call gdbpy_initialize_commands. Initialize
2989 * symtab.c (make_symbol_completion_list_fn): New function.
2990 * symtab.h (make_symbol_completion_list_fn): Add prototype.
2992 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2994 * target.c (target_get_osdata): Check for equal or higher than
2995 process_stratum, not dummy_stratum.
2997 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2999 * remote.c (extended_remote_can_run): Delete.
3000 (init_remote_ops): Don't register it.
3001 * target.c (target_get_osdata): Don't check for target_can_run.
3002 Instead any target that has already been pushed, otherwise
3003 fallback to the default run target.
3005 2009-02-06 Pedro Alves <pedro@codesourcery.com>
3007 * target.c (target_create_inferior, target_detach)
3008 (target_mourn_inferior, target_attach, target_close): Do target
3010 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
3011 (debug_to_mourn_inferior, debug_to_close): Delete.
3012 (setup_target_debug): Adjust.
3014 2009-02-05 Pedro Alves <pedro@codesourcery.com>
3016 * target.h (target_stopped_data_address_p): Delete declaration,
3017 and don't define as macro.
3018 * target.c (target_stopped_data_address_p): Delete.
3020 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
3021 Tom Tromey <tromey@redhat.com>
3023 * python/python-utils.c (target_string_to_unicode): New function.
3024 * python/python-internal.h (target_string_to_unicode): New prototype.
3025 * python/python-value.c (valpy_string): New function.
3026 (value_object_methods): Add `string' entry.
3028 2009-02-05 Pedro Alves <pedro@codesourcery.com>
3030 * target.h (target_tid_to_str): Delete.
3031 * thread.c (print_thread_info, thread_apply_all_command)
3032 (thread_apply_command, thread_command, do_captured_thread_select):
3033 Use target_pid_to_str instead of target_tid_to_str.
3034 * linux-fork.c (delete_fork_command): Likewise.
3036 2009-02-05 Pedro Alves <pedro@codesourcery.com>
3038 * frame.c (has_stack_frames): Make public.
3039 (get_prev_frame): Don't allow a NULL this_frame anymore.
3040 * frame.h (has_stack_frames): Declare.
3041 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
3042 to get_prev_frame, instead start at get_current_frame.
3043 (varobj_create): Check has_stack_frames before getting any frame;
3044 eliminate one usage of deprecated_safe_get_selected_frame.
3046 2009-02-05 Tom Tromey <tromey@redhat.com>
3047 Thiago Jung Bauermann <bauerman@br.ibm.com>
3049 * python/python.c (GdbMethods): Move to bottom of file.
3050 (get_parameter, execute_gdb_command, gdbpy_write,
3051 gdbpy_flush): Remove forward declarations.
3052 (eval_python_from_control_command): Fix error checking of function
3053 PyRun_SimpleString. Fix error string.
3054 (python_command): Likewise.
3055 (execute_gdb_command): Added from_tty argument.
3057 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
3059 * language.h (language_dfn): Add la_get_string member.
3060 (LA_GET_STRING): New macro.
3061 (default_get_string): New prototype.
3062 * language.c (default_get_string): New function.
3063 (unknown_language_defn, auto_language_defn, local_language_defn): Use
3064 default_get_string for la_get_string.
3065 * c-lang.c (c_get_string): New function.
3066 (c_language_defn, cplus_language_defn, asm_language_defn): Use
3067 c_get_string for la_get_string.
3068 (minimal_language_defn): Likewise
3069 * ada-lang.c (ada_language_defn): Likewise.
3070 * f-lang.c (f_language_defn): Use default_get_string for
3072 * jv-lang.c (java_language_defn): Likewise.
3073 * m2-lang.c (m2_language_defn): Likewise.
3074 * objc-lang.c (objc_language_defn): Likewise.
3075 * p-lang.c (p_language_defn): Likewise.
3076 * scm-lang.c (scm_language_defn): Likewise.
3077 * typeprint.c (type_to_string): New function.
3078 * value.h (type_to_string): New prototype.
3079 * valprint.c (val_print_string): Factor out code for reading string
3080 from the inferior into its own function. Put 2 spaces after period
3082 (read_string): New function.
3083 * valprint.h (read_string): New prototype.
3085 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
3086 Tom Tromey <tromey@redhat.com>
3088 PR breakpoints/8079:
3089 * breakpoint.c (print_one_breakpoint): Use exp_string field
3090 to display expression of watchpoints.
3091 (mention): Likewise.
3092 (watch_command_1): Remove trailing whitespace from expression.
3093 * printcmd.c (struct display) <exp_string>: New field.
3094 (display_command): Set exp_string.
3095 (free_display): Free exp_string.
3096 (clear_displays): Use free_display.
3097 (do_one_display): Print exp_string.
3098 (display_info): Likewise.
3100 2009-02-04 Tom Tromey <tromey@redhat.com>
3101 Thiago Jung Bauermann <bauerman@br.ibm.com>
3102 Phil Muldoon <pmuldoon@redhat.com>
3104 * python/python-internal.h (gdbpy_get_value_from_history): Rename
3105 prototype to gdbpy_history.
3106 (gdbpy_is_string): Declare.
3107 (python_string_to_host_string): Declare.
3108 * python/python-utils.c (gdbpy_is_string): New function.
3109 (unicode_to_encoded_string): New function.
3110 (unicode_to_target_string): Use it.
3111 (python_string_to_host_string): New function.
3112 * python/python-value.c (valpy_address): New function.
3113 (convert_value_from_python): Use gdbpy_is_string. Change to throw
3114 Python exception instead of a GDB exception on error. Properly check
3116 (valpy_getitem): Convert field name to host string. Handle array
3117 accesses. Adapt to new behaviour of convert_value_from_python.
3118 (valpy_new): Adapt to new behaviour of convert_value_from_python.
3119 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
3120 VALPY_BITXOR, VALPY_BITOR>: New constants.
3121 (valpy_binop): Update. Adapt to new behaviour of
3122 convert_value_from_python.
3123 (valpy_invert): New function.
3124 (valpy_lsh): Likewise.
3125 (valpy_rsh): Likewise.
3126 (valpy_and): Likewise.
3127 (valpy_or): Likewise.
3128 (valpy_xor): Likewise.
3129 (valpy_richcompare): Call convert_value_from_python instead of doing
3131 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
3132 (gdbpy_get_value_from_history): Rename
3133 function to gdbpy_history.
3134 (gdbpy_initialize_values): Don't set tp_new.
3135 (value_object_type): Add valpy_new.
3136 (value_object_methods): Add `address' entry.
3137 (value_object_as_number): Update for new methods.
3138 * python/python.c (GdbMethods): Rename entry from
3139 `get_value_from_history' to `history'.
3141 2009-02-04 Jerome Guitton <guitton@adacore.com>
3143 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
3144 of type to guard against a crash.
3146 2009-02-04 Jerome Guitton <guitton@adacore.com>
3148 * value.c (value_from_contents_and_address): Always return
3149 a lval_memory value, even if address is null.
3151 2009-02-04 Tristan Gingold <gingold@adacore.com>
3153 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
3154 (amd64_darwin_sigcontext_addr): Ditto.
3155 (darwin_dwarf_signal_frame_p): Ditto.
3156 (i386_darwin_init_abi): Handle signal frames, use the const for
3158 (x86_darwin_init_abi_64): Ditto.
3160 2009-02-04 Tristan Gingold <gingold@adacore.com>
3162 * i386-tdep.c (i386_sigtramp_p): Make it public.
3163 * i386-tdep.h (i386_sigtramp_p): Declare.
3165 2009-02-04 Tristan Gingold <gingold@adacore.com>
3167 * machoread.c (macho_symfile_read): Read minsymtab also from
3169 (macho_symfile_read): Try to read dwarf2 frame info from main
3170 object file, but not from OSO files.
3171 (macho_symfile_offsets): Update section names for latest BFD
3173 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
3174 (x86_darwin_init_abi_64): Ditto.
3175 * solib-darwin.c: New file.
3176 * solib-darwin.h: New file.
3177 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
3179 2009-02-04 Tristan Gingold <gingold@adacore.com>
3181 * solist.h (struct target_so_ops): Comment fallback behavior for
3184 2009-02-03 Tom Tromey <tromey@redhat.com>
3186 * completer.c (add_struct_fields): Check type_name against NULL
3189 2009-02-03 Joel Brobecker <brobecker@adacore.com>
3191 * MAINTAINERS: Update Elena's email address.
3193 2009-02-02 Joel Brobecker <brobecker@adacore.com>
3195 * breakpoint (update_watchpoint): Minor comment adjustment.
3197 2009-02-02 Tom Tromey <tromey@redhat.com>
3200 * completer.c (count_struct_fields): Count method names.
3201 (add_struct_fields): Add matching method names.
3203 2009-02-02 Doug Evans <dje@google.com>
3205 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
3206 doing any further tcl/tk configury. Don't configure gdbtk if
3207 tcl or tk check fails.
3208 * aclocal.m4: Regenerate.
3209 * configure: Regenerate.
3211 2009-02-02 Tom Tromey <tromey@redhat.com>
3214 * valops.c (find_overload_match): Follow typedefs before taking
3215 address of object argument.
3217 2009-02-01 Doug Evans <dje@google.com>
3219 * target.h (target_waitstatus_to_string): Declare.
3220 * target.c (target_waitstatus_to_string): New function. Copied from
3221 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
3222 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
3223 TARGET_WAITKIND_NO_HISTORY.
3224 (debug_to_wait): Call it.
3225 * infrun.c (wait_for_inferior): If debug_infrun, print result of
3227 (fetch_inferior_event): Ditto.
3229 2009-01-30 Tom Tromey <tromey@redhat.com>
3231 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
3233 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
3236 * thread.c (do_captured_list_thread_ids): Report the current
3239 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
3241 * breakpoint.c (create_breakpoint, create_breakpoints)
3242 (break_command_really, set_breakpoint): New parameter enabled.
3243 (create_breakpoint, break_command_really): Make breakpoint
3244 disabled if so requested.
3245 * breakpoint.h (set_breakpoint): New parameter enabled.
3246 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
3248 2009-01-28 Doug Evans <dje@google.com>
3250 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
3251 (amd64_displaced_step_fixup): Declare.
3252 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
3253 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
3254 and make static global.
3255 (amd64_arch_regmap_len): New static global.
3256 (amd64_arch_reg_to_regnum): New function.
3257 (struct amd64_insn): New struct.
3258 (struct displaced_step_closure): New struct.
3259 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
3260 (rex_prefix_p,skip_prefixes)
3261 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
3262 (amd64_insn_length,amd64_get_unused_input_int_reg)
3263 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
3264 (amd64_displaced_step_copy_insn)
3265 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
3266 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
3267 (amd64_displaced_step_fixup): New functions.
3268 * amd64-linux-tdep.c: #include arch-utils.h.
3269 (amd64_linux_init_abi): Install displaced stepping support.
3271 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
3272 Jerome Guitton <guitton@adacore.com>
3274 * configure, config.in: Regenerated.
3275 * configure.ac: Add --with-system-gdbinit.
3276 * main.c (get_init_files): New.
3277 (captured_main): Use get_init_files. Load system gdbinit before
3279 (print_gdb_help): Print location of init files.
3281 2009-01-28 Pedro Alves <pedro@codesourcery.com>
3283 * corefile.c (generic_search): Delete disabled code.
3284 * gdbcore.h (generic_search): Delete declaration.
3286 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3288 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
3289 parent to the child.
3290 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
3291 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
3292 remove_breakpoints to remove breakpoints from the parent.
3294 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3296 PR backtrace/9458, PR backtrace/8864:
3297 * frame.c (create_new_frame): Update the frame's cached PC before
3298 finding its unwinder. Use frame_id_build to build the new frame's
3300 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
3301 array values from the ``args'' array values.
3303 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3305 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
3306 (create_array_type, create_set_type, init_flags_type)
3307 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
3308 with a call to XZALLOC or XCALLOC, and pairs of calls to
3309 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
3311 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3313 Add "maint set|show internal-error|internal-warning quit|corefile
3314 ask|yes|no" commands.
3317 * utils.c (internal_problem_ask, internal_problem_yes)
3318 (internal_problem_no, internal_problem_modes): New.
3319 (struct internal_problem): Remove FIXME. Make should_quit and
3320 should_dump_core types to char *.
3321 (internal_vproblem, internal_error_problem)
3322 (internal_warning_problem): Adjust.
3323 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
3325 (add_internal_problem_command): New.
3326 (_initialize_utils): New.
3328 2009-01-25 Pedro Alves <pedro@codesourcery.com>
3330 * infcmd.c (program_info): Use paddress instead of casting stop_pc
3333 2009-01-24 Pedro Alves <pedro@codesourcery.com>
3335 * infrun.c (normal_stop): Don't call
3336 deprecated_update_frame_pc_hack.
3337 * frame.c (deprecated_update_frame_pc_hack)
3338 (deprecated_update_frame_base_hack): Delete, and ...
3339 (create_new_frame): ... inline here.
3340 * frame.h (deprecated_update_frame_pc_hack)
3341 (deprecated_update_frame_base_hack): Delete declarations.
3343 2009-01-23 Pedro Alves <pedro@codesourcery.com>
3345 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
3346 * cli/cli-setshow.c (do_setshow_command): Handle it.
3347 * command.h (enum var_types): Add var_zuinteger.
3348 (add_setshow_zuinteger_cmd): Declare.
3350 * valprint.c (_initialize_valprint): Change the set input-radix
3351 and set output-radix commands to zuinteger type.
3353 2009-01-23 Pedro Alves <pedro@codesourcery.com>
3356 * infrun.c (normal_stop): Tag threads as stopped, and run the
3357 hook-stop before printing the stack frame.
3359 2009-01-22 Pedro Alves <pedro@codesourcery.com>
3362 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
3365 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
3367 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
3370 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
3373 * infcmd.c (signal_command): Do not specify a resume PC.
3375 2009-01-19 Doug Evans <dje@google.com>
3377 * dummy-frame.c (dummy_frame): Replace regcache member with
3379 (dummy_frame_push): Replace caller_regcache arg with caller_state.
3380 All callers updated.
3381 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
3382 (dummy_frame_pop): Rewrite. Verify requested frame is in the
3383 dummy frame stack. Restore program state.
3384 (cleanup_dummy_frames): Rewrite.
3385 (dummy_frame_sniffer): Update. Make static.
3386 * dummy-frame.h (regcache,frame_info): Delete forward decls.
3387 (inferior_thread_state): New forward decl.
3388 (dummy_frame_push): Update prototype.
3389 * frame.c (frame_pop): dummy_frame_pop now does all the work for
3391 * infcall.c (breakpoint_auto_delete_contents): Delete.
3392 (get_function_name,run_inferior_call): New fns.
3393 (call_function_by_hand): Simplify by moving some code to
3394 get_function_name, run_inferior_call. Inferior function call wrapped
3395 in TRY_CATCH so there's less need for cleanups and all exits from
3396 proceed are handled similarily. Detect program exit.
3397 Detect program stopping in a different thread.
3398 Make error messages more consistent.
3399 * inferior.h (inferior_thread_state): Declare (opaque type).
3400 (save_inferior_thread_state,restore_inferior_thread_state,
3401 make_cleanup_restore_inferior_thread_state,
3402 discard_inferior_thread_state, get_inferior_thread_state_regcache):
3404 (save_inferior_status): Update prototype.
3405 * infrun.c: (normal_stop): When stopped for the completion of an
3406 inferior function call, verify the expected stack frame kind.
3407 (inferior_thread_state): New struct.
3408 (save_inferior_thread_state,restore_inferior_thread_state,
3409 do_restore_inferior_thread_state_cleanup,
3410 make_cleanup_restore_inferior_thread_state,
3411 discard_inferior_thread_state,
3412 get_inferior_thread_state_regcache): New functions.
3413 (inferior_status): Move stop_signal, stop_pc, registers to
3414 inferior_thread_state. Remove restore_stack_info.
3415 (save_inferior_status): Remove arg restore_stack_info.
3416 All callers updated. Remove saving of state now saved by
3417 save_inferior_thread_state.
3418 (restore_inferior_status): Remove restoration of state now done by
3419 restore_inferior_thread_state.
3420 (discard_inferior_status): Remove freeing of registers, now done by
3421 discard_inferior_thread_state.
3423 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3425 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
3426 at a time, times NUM_TO_SCROLL.
3427 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
3428 fetch the selected frame if there is no stack.
3430 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3433 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
3435 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
3436 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
3437 is thrown while handling an event, finish the thread state.
3438 (normal_stop): Use finish_thread_state cleanup.
3439 * infcmd.c (run_command_1): If an error is thrown while starting
3440 the inferior, finish the thread state.
3442 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3444 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
3445 skip breakpoints without a location (pending breakpoints).
3447 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3450 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
3452 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
3454 * thread.c (thread_command): Move call to annotate_thread_changed
3456 (do_captured_thread_select): ... here, to avoid printing an
3457 annotation if the thread change generates an exception.
3459 2009-01-16 Joel Brobecker <brobecker@adacore.com>
3461 * NEWS: Document x86_64/MinGW as a new native configuration.
3463 2009-01-16 Joel Brobecker <brobecker@adacore.com>
3465 * NEWS: Move the documentation of "info os processes" to
3466 the appropriate section (documenting the new commands).
3468 2009-01-15 Doug Evans <dje@google.com>
3470 * target.h (target_signal_to_string): Make return type const char *.
3471 (target_signal_to_name): Ditto.
3472 (target_signal_from_name): Make arg const char *.
3473 * infrun.c (sig_print_info): Update.
3474 * signals/signals.c (signals): Make array and struct members const.
3475 (target_signal_to_string): Make return type const char *.
3476 (target_signal_to_name): Ditto.
3477 (target_signal_from_name): Make arg const char *.
3479 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
3480 Tristan Gingold <gingold@adacore.com>
3482 * solist.h (struct target_so_ops): New member bfd_open.
3483 (solib_find): Add prototype.
3484 (solib_bfd_fopen): Add prototype.
3485 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
3486 from solib_bfd_open.
3487 (solib_bfd_open): Use ops->bfd_open override if present. Call
3488 solib_find and solib_bfd_open otherwise.
3490 * objfiles.h (OBJF_KEEPBFD): New define.
3491 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
3492 objfile flag is set.
3493 * solib.c (symbol_add_stub): Do not allocate second BFD for
3494 shared library; use OBJF_KEEPBFD flag on solib objfile.
3496 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
3498 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
3500 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
3502 * value.h (address_of_variable): Add prototype.
3503 (locate_var_value): Remove prototype.
3505 * findvar.c (read_var_value): Do not attempt to default frame
3507 (locate_var_value): Remove function.
3508 * valops.c (value_of_variable): Retrieve selected frame for
3509 symbols that require a frame when called with NULL block.
3510 * valops.c (address_of_variable): New function.
3512 * eval.c (evaluate_subexp_for_address): Call address_of_variable
3513 instead of calling locate_var_value.
3514 (evaluate_subexp_with_coercion): Likewise.
3516 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
3518 * NEWS: Document "define" for prefixed commands.
3519 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
3520 show_user_1 for prefix commands.
3521 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
3522 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
3523 commands. Return the containing command list.
3524 (define_command, document_command): Update to handle prefix commands.
3525 (show_user_1): Add prefix and name arguments. Handle prefix
3527 * cli/cli-script.h (show_user_1): Update prototype.
3529 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
3531 * mingw-ser.c (console_select_thread): Add return to make
3533 (pipe_select_thread): Likewise.
3534 (file_select_thread): Likewise.
3536 2009-01-14 Pedro Alves <pedro@codesourcery.com>
3538 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
3541 2009-01-14 Pedro Alves <pedro@codesourcery.com>
3543 * remote.c (extended_remote_mourn_1): Invalidate our notion of
3544 current general thread.
3546 2009-01-14 Pedro Alves <pedro@codesourcery.com>
3548 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
3549 without a live selected thread.
3551 2009-01-14 Joel Brobecker <brobecker@adacore.com>
3553 Update the copyright notice of some of the files I missed
3554 in the previous copyright update.
3556 2009-01-14 Joel Brobecker <brobecker@adacore.com>
3558 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
3559 base address instead of casting it to DWORD.
3561 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
3563 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
3564 for NULL frame pointers.
3566 2009-01-13 Mark Kettenis <kettenis@gnu.org>
3568 * utils.c (host_address_to_string): Reimplement in a way that
3569 avoids the cast of the address to long.
3571 2009-01-13 Joel Brobecker <brobecker@adacore.com>
3573 * mdebugread.c (parse_symbol): Save the symbol private data
3574 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
3575 (psymtab_to_symtab_1): Likewise.
3576 (parse_procedure): Declare variable "e" only in the scope
3577 where it is used. Extract the symbol private data using
3580 2009-01-13 Jim Blandy <jimb@codesourcery.com>
3582 Abstract out common code for copying value locations.
3584 * value.h (set_value_component_location): New declaration.
3585 * value.c (set_value_component_location): New function.
3586 (value_primitive_field): Use it.
3587 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
3588 * valops.c (search_struct_field, value_slice): Same.
3589 * ada-lang.c (coerce_unspec_val_to_type)
3590 (ada_value_primitive_packed_val): Same.
3592 2009-01-13 Joel Brobecker <brobecker@adacore.com>
3594 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
3596 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
3598 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
3600 * i386-cygwin-tdep.c: Ditto.
3601 * i386-windows-nat.c: Ditto.
3602 * windows-nat.h: Ditto.
3603 * windows-tdep.c: Ditto.
3604 * windows-tdep.h: Ditto.
3605 * windows-nat.c: Ditto.
3606 (cygwin_load_start): Redefine as CORE_ADDR.
3607 (cygwin_load_end): Ditto.
3608 (windows_make_so): Coerce result of address arithmetic to uintptr_t
3609 before coercing to CORE_ADDR to avoid a compiler warning.
3610 (handle_exception): Define addr as CORE_ADDR and coerce
3611 ExceptionAddress to uintptr_t before assigining to avoid a compiler
3613 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
3616 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3618 Fix linking with --enable-targets=all:
3619 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
3620 (HFILES_NO_SRCDIR): Add windows-tdep.h.
3621 (ALLDEPFILES): Add windows-tdep.c.
3623 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
3625 * win32-nat.h: Delete.
3626 * windows-nat.h: Rename from win32-nat.h.
3627 * win32-nat.c: Delete.
3628 * windows-nat.c: Rename from win32-nat.c.
3629 * win32-termcap.c: Delete.
3630 * windows-termcap.c: Rename from win32-termcap.c.
3631 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
3632 * configure.ac: Handle rename from win32-termcap.c ->
3634 * configure: Regenerate.
3635 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
3636 -> windows-termcap.c.
3637 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
3639 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
3640 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
3642 (win32_make_so): Handle cygwin compiler warning due to change of
3643 load_addr from DWORD to LPVOID.
3644 (handle_load_dll): Use %p in format string to properly print address
3645 and avoid a compiler warning.
3646 (DEBUG_EXCEPTION_SIMPLE): Ditto.
3647 (handle_exception): Ditto.
3648 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
3649 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
3651 * config/i386/mingw.mh: Ditto.
3652 * config/i386/mingw64.mh: Ditto.
3654 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3656 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
3657 arrayprint_recurse_level to a parameter. Update all the callers. New
3658 comment at autovariables.
3660 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3662 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
3665 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3667 * target.c (target_xfer_partial): Use host_address_to_string to
3668 print the address of readbuf and writebuf. Cast the address of
3669 elements inside the myaddr buffer into intptr_t.
3670 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
3671 Cast the address of elements inside the myaddr buffer into
3674 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3676 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
3677 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
3678 * configure.host, configure.tgt: Add handling for x86_64/windows.
3679 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
3680 and amd64-windows-tdep.c.
3682 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3684 * win32-tdep.h, win32-tdep.c: New files.
3685 * i386-cygwin-tdep.h: Delete.
3686 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
3688 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
3689 * win32-nat.c: Likewise.
3690 * configure.tgt: Add win32-tdep.o to the list of target object
3691 files for i386-cygwin and i386-mingw targets.
3693 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3695 * win32-nat.h: New file.
3696 * win32-nat.c (mappings): Initialize to NULL.
3697 (win32_set_context_register_offsets): New function.
3698 * i386-windows-nat.c: New file.
3699 (mappings): Moved here from win32-nat.c.
3700 (_initialize_i386_windows_nat): New function.
3701 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
3702 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
3704 2009-01-09 Andreas Schwab <schwab@suse.de>
3706 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
3708 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
3710 * gdbtypes.c (append_composite_type_field): Correct the location of
3713 2009-01-09 Pedro Alves <pedro@codesourcery.com>
3715 * defs.h (deprecated_error_hook): Delete declaration.
3716 * interps.c (clear_interpreter_hooks): Adjust.
3717 * remote-sim.c (gdb_os_error): Don't try to call
3718 deprecated_error_hook. No need to call exit anymore.
3719 * top.c (deprecated_error_hook): Delete.
3721 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3723 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
3724 to print the address of the gdbarch pointer.
3726 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3728 * gdbarch.sh: Fix all the compilation errors on amd64-windows
3729 due to casting a pointer to a long when printing a function
3730 address. Instead, use host_address_to_string to convert our
3731 address to a string.
3732 * gdbarch.c: Regenerate.
3734 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3736 * event-top.c (async_disconnect, async_stop_sig): use "raise"
3737 instead of "kill" to raise a signal.
3739 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3741 * win32-nat.c (get_module_name): Change the type of parameter
3742 "base_address" to LPVOID. Remove unnecessary cast.
3743 (struct lm_info): Change type of load_addr to LPVOID.
3744 (win32_make_so): Change the type of parameter "load_addr"
3745 to LPVOID. Remove some unnecessary casts.
3746 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
3747 (win32_xfer_shared_libraries): Add missing cast.
3749 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3751 * win32-nat.c (has_detach_ability, set_process_privilege):
3752 Cast the result of GetProcAddress to (void *) to avoid
3753 a compilation warning.
3755 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3757 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
3760 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3762 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
3763 definition of local variable "done".
3764 (info_w32_command, handle_exception): Remove unnecessary cast.
3766 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3768 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
3769 DebugSetProcessKillOnExit. Update all uses in this file.
3770 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
3771 Update all uses in this file.
3773 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3775 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
3776 and use it when pushing the target.
3777 (win32_attach, win32_create_inferior): Update call to
3778 do_initial_win32_stuff.
3779 (win32_detach, win32_mourn_inferior): Use our ops parameter
3780 instead of the global win32_ops to unpush the target.
3782 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3784 * ser-mingw.c (ser_windows_open): Use proper type when casting
3785 in call to _open_osfhandle.
3787 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
3789 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
3791 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3793 * CONTRIBUTE: Minor reformatting.
3795 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
3797 * MAINTAINERS: Add myself to Write After Approval.
3798 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
3801 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
3803 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
3804 Call exit to make it obvious to GCC.
3806 2009-01-08 Tom Tromey <tromey@redhat.com>
3808 PR breakpoints/9350:
3809 * varobj.c (varobj_invalidate): Unconditionally free
3811 * symfile.c (syms_from_objfile): Free local_addr when returning
3813 * exec.c (exec_file_attach): Do cleanups before returning.
3814 (exec_file_command): Likewise.
3815 * corefile.c (reopen_exec_file): Do cleanups before returning.
3816 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
3818 (do_vec_free): New function.
3819 (update_global_location_list): Make a cleanup for old_locations.
3820 Do cleanups before returning. Remove unused variable 'e'.
3821 (find_condition_and_thread): Free result of parsing the
3823 (print_it_typical): Do cleanups before returning.
3824 (breakpoint_re_set_one): Always free sals.sals.
3826 2009-01-08 Joel Brobecker <brobecker@adacore.com>
3827 Emi Suzuki <emi-suzuki@tjsys.co.jp>
3829 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
3832 2009-01-07 Doug Evans <dje@google.com>
3834 * top.c (gdb_prompt_string): Delete, unused.
3836 2009-01-07 Pedro Alves <pedro@codesourcery.com>
3838 Delete ONE_PROCESS_WRITETEXT leftovers.
3840 * breakpoint.c (insert_bp_location): Delete process_warning
3842 (insert_breakpoint_locations): Adjust.
3843 (reattach_breakpoints): Adjust.
3844 * infrun.c (normal_stop): Drop "It might be running in another
3847 2009-01-07 Stan Shebs <stan@codesourcery.com>
3849 * config/pa/linux.mh (XDEPFILES): Remove.
3851 2009-01-07 Doug Evans <dje@google.com>
3853 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
3855 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
3857 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
3858 spacing, a regression from 2008-04-22.
3860 2009-01-07 Joel Brobecker <brobecker@adacore.com>
3862 * utils.c (gdb_print_host_address): Adjust implementation to
3863 reuse host_address_to_string. Move comment explaining the conversion
3864 from host address to string from here...
3865 (host_address_to_string): ... to there.
3867 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
3869 * MAINTAINERS: Add myself for write after approval privileges.
3871 2009-01-06 Tom Tromey <tromey@redhat.com>
3873 * value.c (set_internalvar): Use value_free, not xfree.
3875 2009-01-06 Jim Blandy <jimb@red-bean.com>
3877 Check return values of functions declared with warn_unused_result
3878 attribute in GLIBC 2.8.
3879 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
3880 * inflow.c (check_syscall): New function.
3881 (new_tty): Use check_syscall to check return values from open and dup.
3882 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
3883 * main.c (captured_main): Call cwd after setting up gdb_stderr;
3884 check for errors from getcwd.
3885 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
3886 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
3887 (stdio_file_fputs): Same.
3888 * utils.c (internal_vproblem): abort if last-ditch error message
3891 * top.c (gdb_init): Don't set the current directory here; that's
3892 already been done in captured_main.
3894 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
3896 * ser-tcp.c: Adjust includes.
3897 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
3898 (tcp_auto_retry, tcp_retry_limit): Declare.
3899 (TIMEOUT): Remove, in favor of tcp_retry_limit.
3900 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
3901 (wait_for_connect): New function.
3902 (net_open): Use it. Add auto-retry logic.
3903 (set_tcp_cmd, show_tcp_cmd): New functions.
3904 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
3905 and "set/show tcp connect-timeout" commands.
3906 * NEWS: Document new commands.
3908 2009-01-05 Tom Tromey <tromey@redhat.com>
3910 * python/python-internal.h (Py_ssize_t): Define as int.
3912 2009-01-05 Jim Blandy <jimb@red-bean.com>
3914 * MAINTAINERS: Fix my e-mail address as steering committee member.
3916 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3918 Updated copyright notices for most files.
3920 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3922 * top.c (print_gdb_version): Update copyright year.
3924 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3926 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
3928 2009-01-01 Pedro Alves <pedro@codesourcery.com>
3930 PR breakpoints/9681:
3931 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
3932 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
3933 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
3934 retrow all other exceptions.
3936 For older changes see ChangeLog-2008.
3942 version-control: never