1 2016-07-01 John Baldwin <jhb@FreeBSD.org>
3 * fbsd-nat.c (struct fbsd_fork_child_info): Rename to ...
4 (struct fbsd_fork_info): ... this.
5 (struct fbsd_fork_info) <child>: Rename to ...
6 (struct fbsd_fork_info) <ptid>: ... this.
7 (fbsd_pending_children): Update type.
8 (fbsd_remember_child): Update type and field name.
9 (fbsd_is_child_pending): Likewise.
10 (fbsd_pending_vfork_done): New variable.
11 (fbsd_is_vfork_done_pending): New function.
12 (fbsd_next_vfork_done): New function.
13 (fbsd_resume): Don't resume processes with a pending vfork done
15 (fbsd_wait): Report pending vfork done events.
16 (fbsd_follow_fork): Delay and record a pending vfork done event
17 for a vfork parent when detaching the child.
19 2016-07-01 John Baldwin <jhb@FreeBSD.org>
21 * fbsd-nat.c (super_resume): Move earlier next to "super_wait".
22 (resume_one_thread_cb): Move below fork following helper code.
23 (resume_all_threads_cb): Likewise.
24 (fbsd_resume): Likewise.
26 2016-07-01 John Baldwin <jhb@FreeBSD.org>
28 * fbsd-nat.c (fbsd_follow_fork): Only detach child if
29 "detach_fork" is true.
31 2016-07-01 John Baldwin <jhb@FreeBSD.org>
33 * x86bsd-nat.c: Include 'gdbthread.h'.
34 (x86bsd_dr_set): Set debug registers on all threads belonging to
37 2016-07-01 John Baldwin <jhb@FreeBSD.org>
39 * Makefile.in [HFILES_NO_SRCDIR]: Replace 'amd64bsd-nat.h' with
41 * amd64bsd-nat.c: Include 'x86bsd-nat.h' instead of
43 (amd64bsd_xsave_len): Rename and move to x86bsd-nat.c.
44 (amd64bsd_fetch_inferior_registers): Replace 'amd64bsd_xsave_len'
45 with 'x86bsd_xsave_len'.
46 (amd64bsd_store_inferior_registers): Likewise.
47 (amd64bsd_target): Inherit from x86bsd_target.
48 (amd64bsd_dr_get): Rename and move to x86bsd-nat.c.
49 (amd64bsd_dr_set): Likewise.
50 (amd64bsd_dr_set_control): Likewise.
51 (amd64bsd_dr_set_addr): Likewise.
52 (amd64bsd_dr_get_addr): Likewise.
53 (amd64bsd_dr_get_status): Likewise.
54 (amd64bsd_dr_get_control): Likewise.
55 * amd64fbsd-nat.c: Include 'x86bsd-nat.h' instead of
57 (super_mourn_inferior): Move to x86bsd-nat.c.
58 (amd64fbsd_mourn_inferior): Rename and move to x86bsd-nat.c.
59 (amd64fbsd_read_description): Replace 'amd64bsd_xsave_len' with
61 (_initialize_amd64fbsd_nat): Remove x86 watchpoint setup and
62 mourn_inferior' target op.
63 * config/i386/fbsd.mh (NATDEPFILES): Add x86bsd-nat.o.
64 * config/i386/fbsd64.mh: Likewise.
65 * config/i386/nbsd64.mh: Likewise.
66 * config/i386/nbsdelf.mh: Likewise.
67 * config/i386/obsd.mh: Likewise.
68 * config/i386/obsd64.mh: Likewise.
69 * i386bsd-nat.c: Include 'x86bsd-nat.h'.
70 (i386bsd_xsave_len): Rename and move to x86bsd-nat.c.
71 (i386bsd_fetch_inferior_registers): Replace 'i386bsd_xsave_len'
72 with 'x86bsd_xsave_len'.
73 (i386bsd_store_inferior_registers): Likewise.
74 (i386bsd_target): Inherit from x86bsd_target.
75 (i386bsd_dr_get): Rename and move to x86bsd-nat.c.
76 (i386bsd_dr_set): Likewise.
77 (i386bsd_dr_set_control): Likewise.
78 (i386bsd_dr_set_addr): Likewise.
79 (i386bsd_dr_get_addr): Likewise.
80 (i386bsd_dr_get_status): Likewise.
81 (i386bsd_dr_get_control): Likewise.
82 * i386bsd-nat.h (i386bsd_xsave_len): Remove.
83 (i386bsd_dr_set_control): Remove.
84 (i386bsd_dr_set_addr): Remove.
85 (i386bsd_dr_get_addr): Remove.
86 (i386bsd_dr_get_status): Remove.
87 (i386bsd_dr_get_control): Remove.
88 * i386fbsd-nat.c: Include 'x86bsd-nat.h'.
89 (i386fbsd_read_description): Replace 'i386bsd_xsave_len' with
91 (_initialize_i386fbsd_nat): Remove x86 watchpoint setup and
92 mourn_inferior' target op.
93 * x86bsd-nat.c: New file.
94 * x86bsd-nat.h: New file.
96 2016-07-01 Pedro Alves <palves@redhat.com>
97 Tom Tromey <tom@tromey.com>
99 * jit.c (jit_reader_load_command): Call reinit_frame_cache and
100 jit_inferior_created_hook.
101 (jit_reader_unload_command): Call reinit_frame_cache and
102 jit_inferior_exit_hook.
103 * jit.c (struct jit_unwind_private) <registers>: Delete field.
104 <regcache>: New field.
105 (jit_unwind_reg_set_impl): Set the register's value in the
106 regcache. Free the passed-in gdb_reg_value.
107 (jit_dealloc_cache): Adjust to free the regcache.
108 (jit_frame_sniffer): Allocate a regcache instead of an array of
109 gdb_reg_value pointers.
110 (jit_frame_this_id): Adjust.
111 (jit_frame_prev_register): Read raw registers off of the regcache
112 instead of from the gdb_reg_value pointer array. Use
113 gdbarch_pseudo_register_read_value to read pseudo registers.
114 * regcache.c (regcache_raw_set_cached_value): New function,
115 factored out from ...
116 (regcache_raw_write): ... here.
117 * regcache.h (regcache_raw_set_cached_value): Declare.
119 2016-07-01 Pedro Alves <palves@redhat.com>
120 Antoine Tremblay <antoine.tremblay@ericsson.com>
122 * inf-ptrace.c (inf_ptrace_detach_success): New function, factored
124 (inf_ptrace_detach): ... here.
125 * inf-ptrace.h (inf_ptrace_detach_success): New declaration.
126 * linux-nat.c (get_pending_status): Rename to ...
127 (get_detach_signal): ... this, and return a host signal instead of
128 filling in a wait status.
129 (detach_one_lwp): New function, factored out from detach_callback
130 and adjusted to handle detaching from a zombie thread.
131 (detach_callback): Skip the leader thread.
132 (linux_nat_detach): No longer defer to inf_ptrace_detach to detach
133 the leader thread, nor build a signal string to pass down.
134 Instead, use target_announce_detach, detach_one_lwp and
135 inf_ptrace_detach_success.
137 2016-07-01 Pedro Alves <palves@redhat.com>
139 * breakpoint.c (breakpoint_init_inferior): Discard watchpoint
141 * infcmd.c (detach_command): Call breakpoint_init_inferior.
143 2016-07-01 Pedro Alves <palves@redhat.com>
145 * darwin-nat.c (darwin_detach): Use target_announce_detach.
146 * inf-ptrace.c (inf_ptrace_detach): Likewise.
147 * nto-procfs.c (procfs_detach): Likewise.
148 * remote.c (remote_detach_1): Likewise.
149 * target.c (target_announce_detach): New function.
150 * target.h (target_announce_detach): New declaration.
152 2016-06-29 Tom Tromey <tom@tromey.com>
155 * python/lib/gdb/command/frame_filters.py (_do_enable_frame_filter)
156 (SetFrameFilterPriority._set_filter_priority): Use "frame_filter",
159 2016-06-29 Tom Tromey <tom@tromey.com>
162 * target.c (free_memory_read_result_vector): Take a pointer to the
164 (read_memory_robust): Install a cleanup for "result".
165 * mi/mi-main.c (mi_cmd_data_read_memory_bytes): Update.
167 2016-06-29 Manish Goregaokar <manish@mozilla.com>
169 * rust-lang.c (rust_get_disr_info): Initialize saveptr to NULL.
171 2016-06-29 Manish Goregaokar <manish@mozilla.com>
173 * rust-lang.c (rust_get_disr_info): Use strtok_r instead of strsep.
175 2016-06-28 Yao Qi <yao.qi@linaro.org>
177 * aarch64-tdep.c (aarch64_displaced_step_b): Use int64_t for
180 2016-06-27 Manish Goregaokar <manish@mozilla.com>
182 * rust-lang.c (rust_print_type, rust_decorations): Print unit
184 (rust_print_type): Omit return type for functions returning unit.
186 2016-06-25 Pierre-Marie de Rodat <derodat@adacore.com>
188 * python/py-breakpoint.c (bppy_init): Clear bppy_pending_object
189 when there is an error during the breakpoint creation.
191 2016-06-25 Tom Tromey <tom@tromey.com>
193 * rust-lang.c (rust_get_disr_info, rust_print_type): Fix
196 2016-06-25 Manish Goregaokar <manish@mozilla.com>
199 * rust-lang.c (rust_get_disr_info): Correctly interpret
200 NonZero-optimized enums of arbitrary depth.
201 (rust_print_type): Correctly print NonZero-optimized
204 2016-06-24 David Taylor <dtaylor@emc.com>
206 PR gdb/17520 Structure offset wrong when 1/4 GB or greater.
207 * c-lang.h: Change all parameters, variables, and struct or union
208 members used as struct or union fie3ld offsets from int to
210 * c-valprint.c: Likewise.
211 * cp-abi.c: Likewise.
212 * cp-abi.h: Likewise.
213 * cp-valprint.c: Likewise.
214 * d-valprint.c: Likewise.
215 * dwarf2loc.c: Likewise.
217 * extension-priv.h: Likewise.
218 * extension.c: Likewise.
219 * extension.h: Likewise.
220 * findvar.c: Likewise.
221 * gdbtypes.h: Likewise.
222 * gnu-v2-abi.c: Likewise.
223 * gnu-v3-abi.c: Likewise.
224 * go-valprint.c: Likewise.
225 * guile/guile-internal.h: Likewise.
226 * guile/scm-pretty-print.c: Likewise.
227 * jv-valprint.c Likewise.
228 * opencl-lang.c: Likewise.
229 * p-lang.h: Likewise.
230 * python/py-prettyprint.c: Likewise.
231 * python/python-internal.h: Likewise.
232 * spu-tdep.c: Likewise.
233 * typeprint.c: Likewise.
234 * valarith.c: Likewise.
235 * valops.c: Likewise.
236 * valprint.c: Likewise.
237 * valprint.h: Likewise.
240 * p-valprint.c: Likewise.
241 * c-typeprint.c (c_type_print_base): When printing offset, use
243 * gdbtypes.c (recursive_dump_type): Ditto.
245 2016-06-24 David Taylor <david.taylor@emc.com>
247 * MAINTAINERS (Write After Approval): Add David Taylor.
249 2016-06-24 John Baldwin <jhb@FreeBSD.org>
251 * configure.ac: Check for support for system call LWP fields on
253 * config.in, configure: Rebuild.
254 * data-directory/Makefile.in (SYSCALLS_FILES): Add freebsd.xml.
255 * fbsd-nat.c (fbsd_wait) [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]:
256 Report system call events.
257 [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]
258 (fbsd_set_syscall_catchpoint): New function.
259 (fbsd_nat_add_target) [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]:
260 Set "to_set_syscall_catchpoint" to "fbsd_set_syscall_catchpoint".
261 * fbsd-tdep.c: Include xml-syscall.h
262 (fbsd_get_syscall_number): New function.
263 (fbsd_init_abi): Set XML system call file name.
264 Add "get_syscall_number" gdbarch method.
265 * syscalls/freebsd.xml: New file.
267 2016-06-24 John Baldwin <jhb@FreeBSD.org>
269 * fbsd-tdep.c: Include "auxv.h".
270 (fbsd_print_auxv_entry): New function.
271 (fbsd_init_abi): Install gdbarch "print_auxv_entry" method.
273 2016-06-24 John Baldwin <jhb@FreeBSD.org>
275 * auxv.c (fprint_auxv_entry): New function.
276 (default_print_auxv_entry): New function.
277 (fprint_target_auxv): Use gdbarch_print_auxv_entry.
278 * auxv.h (enum auxv_format): New enum.
279 (fprint_auxv_entry): Declare.
280 (default_print_auxv_entry): Declare.
281 * gdbarch.sh (print_auxv_entry): New.
282 * gdbarch.c, gdbarch.h: Re-generated.
284 2016-06-24 John Baldwin <jhb@FreeBSD.org>
286 * fbsd-nat.c [KERN_PROC_AUXV] New variable super_xfer_partial.
287 (fbsd_xfer_partial): New function.
288 (fbsd_nat_add_target) [KERN_PROC_AUXV] Set "to_xfer_partial" to
291 2016-06-23 Tom Tromey <tom@tromey.com>
293 * symtab.c (symbol_find_demangled_name): Loop over languages and
294 use language_sniff_from_mangled_name.
295 * rust-lang.c (rust_sniff_from_mangled_name): New function.
296 (rust_language_defn): Update.
297 * p-lang.c (pascal_language_defn): Update.
298 * opencl-lang.c (opencl_language_defn): Update.
299 * objc-lang.c (objc_sniff_from_mangled_name): New function.
300 (objc_language_defn): Update.
301 * m2-lang.c (m2_language_defn): Update.
302 * language.h (struct language_defn) <la_sniff_from_mangled_name>: New
304 (language_sniff_from_mangled_name): Declare.
305 * language.c (language_sniff_from_mangled_name): New function.
306 (unknown_language_defn, auto_language_defn, local_language_defn):
308 * jv-lang.c (java_sniff_from_mangled_name): New function.
309 (java_language_defn): Use it.
310 * go-lang.c (go_sniff_from_mangled_name): New function.
311 (go_language_defn): Use it.
312 * f-lang.c (f_language_defn): Update.
313 * defs.h (enum language): Reorder.
314 * d-lang.c (d_sniff_from_mangled_name): New function.
315 (d_language_defn): Use it.
316 * cp-support.h (gdb_sniff_from_mangled_name): Declare.
317 * cp-support.c (gdb_sniff_from_mangled_name): New function.
318 * c-lang.c (c_language_defn, cplus_language_defn)
319 (asm_language_defn, minimal_language_defn): Update.
320 * ada-lang.c (ada_sniff_from_mangled_name): New function.
321 (ada_language_defn): Use it.
323 2016-06-23 Tom Tromey <tom@tromey.com>
325 * ada-lang.c (ada_extensions): New array.
326 (ada_language_defn): Use it.
327 * c-lang.c (c_extensions): New array.
328 (c_language_defn): Use it.
329 (cplus_extensions): New array.
330 (cplus_language_defn): Use it.
331 (asm_extensions): New array.
332 (asm_language_defn): Use it.
333 (minimal_language_defn): Update.
334 * d-lang.c (d_extensions): New array.
335 (d_language_defn): Use it.
336 * f-lang.c (f_extensions): New array.
337 (f_language_defn): Use it.
338 * go-lang.c (go_language_defn): Update.
339 * jv-lang.c (java_extensions): New array.
340 (java_language_defn): Use it.
341 * language.c (add_language): Call add_filename_language.
342 (unknown_language_defn, auto_language_defn, local_language_defn):
344 * language.h (struct language_defn) <la_filename_extensions>: New
346 * m2-lang.c (m2_language_defn): Update.
347 * objc-lang.c (objc_extensions): New array.
348 (objc_language_defn): Use it.
349 * opencl-lang.c (opencl_language_defn): Update.
350 * p-lang.c (p_extensions): New array.
351 (pascal_language_defn): Use it.
352 * rust-lang.c (rust_extensions): New array.
353 (rust_language_defn): Use it.
354 * symfile.c (add_filename_language): No longer static. Make "ext"
356 (init_filename_language_table): Remove.
357 (_initialize_symfile): Update.
358 * symfile.h (add_filename_language): Declare.
360 2016-06-23 Tom Tromey <tom@tromey.com>
362 * symfile.c (filename_language_table): Now a VEC.
363 (fl_table_size, fl_table_next): Remove.
364 (add_filename_language): Use VEC_safe_push.
365 (set_ext_lang_command, info_ext_lang_command)
366 (deduce_language_from_filename): Use VEC_iterate.
367 (init_filename_language_table): Use VEC_empty.
369 2016-06-23 Tom Tromey <tom@tromey.com>
371 * python/python.c (gdbpy_parameter): Now static.
372 * python/python-internal.h (gdbpy_parameter): Don't declare.
374 2016-06-23 Tom Tromey <tom@tromey.com>
377 * python/lib/gdb/command/frame_filters.py
378 (InfoFrameFilter.list_frame_filters): Rename to print_list. Print
379 nothing if no filters found. Return value indicating whether
380 filters were printed.
381 (InfoFrameFilter.print_list): Remove.
382 (InfoFrameFilter.invoke): Print message if no frame filters
385 2016-06-21 Walfred Tedeschi <walfred.tedeschi@intel.com>
387 * f-valprint.c (f_val_print): Add field names for printing
388 derived types fields.
390 2016-06-21 Andreas Arnez <arnez@linux.vnet.ibm.com>
392 * s390-linux-tdep.c (s390_iterate_over_regset_sections): Fix typo
393 in name of last-break regset.
395 2016-06-21 Pedro Alves <palves@redhat.com>
397 * fork-child.c (fork_inferior): Switch the child to the main UI
398 right after vfork. Save/restore the current UI in the parent.
399 Flush outputs of the main UI instead of the current UI.
401 2016-06-21 Pedro Alves <palves@redhat.com>
403 * breakpoint.c (watchpoint_check): Send watchpoint-deleted output
406 2016-06-21 Pedro Alves <palves@redhat.com>
408 * NEWS: Mention support for running interpreters on separate
409 UIs and the new new-ui command.
411 2016-06-21 Pedro Alves <palves@redhat.com>
413 * interps.c (set_top_level_interpreter): New function, factored
414 out from captured_main.
415 (interpreter_completer): Make extern.
416 * interps.h (set_top_level_interpreter, interpreter_completer):
418 (captured_main): Use set_top_level_interpreter.
419 * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0.
420 (open_terminal_stream, new_ui_command): New functions.
421 (init_main): Install the "new-ui" command.
423 2016-06-21 Pedro Alves <palves@redhat.com>
425 * cli/cli-script.c (read_next_line): Adjust to per-UI stdin.
426 (read_command_lines): Use input_interactive_p instead of
427 input_from_terminal_p.
428 * defs.h (struct ui): Forward declare.
429 (input_from_terminal_p): Rename to ...
430 (input_interactive_p): ... this.
431 * event-top.c (stdin_event_handler): Pass 0 as from_tty argument
433 (command_handler): Adjust to per-UI stdin.
434 (handle_line_of_input): Adjust to per-UI stdin and use
435 input_interactive_p instead of ISATTY and input_from_terminal_p.
436 (gdb_readline_no_editing_callback): Adjust to per-UI stdin.
437 (command_line_handler): Always pass true as "from_tty" parameter
438 of handle_line_of_input and execute_command.
439 (async_sigterm_handler): Pass 0 as from_tty argument to
441 * inflow.c (interactive_mode, show_interactive_mode): Moved to ...
442 (gdb_has_a_terminal): Don't check interactive_mode here.
443 (_initialize_inflow): Don't install "set interactive-mode" here.
444 * main.c (captured_command_loop): Adjust to per-UI stdin.
445 * mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI
447 * top.c (new_ui): Save the stdin stream and whether it's a tty.
448 (dont_repeat): Adjust to per-UI stdin.
449 (command_line_input): Adjust to per-UI stdin and to use
451 (quit_force): Write history if any UI supports interactive input.
452 (interactive_mode, show_interactive_mode): Move here, from
454 (input_from_terminal_p): Rename to ...
455 (input_interactive_p): ... this, and check the "interactive_mode"
456 global instead of calling gdb_has_a_terminal.
457 (_initialize_top): Install "set interactive-mode" here.
458 * top.h (struct ui) <stdin_stream, input_interactive_p>: New
460 * utils.c (quit): Pass 0 as from_tty argument to quit_force.
461 (defaulted_query): Adjust to per-UI stdin and to use
464 2016-06-21 Pedro Alves <palves@redhat.com>
466 * event-top.c (stdin_event_handler): Don't quit gdb if it was a
467 secondary UI's input stream that closed. Instead, just delete the
470 2016-06-21 Pedro Alves <palves@redhat.com>
472 * event-top.c (main_ui_): Delete.
473 (main_ui, current_ui, ui_list): No longer initialize here.
474 * main.c (captured_main): UI initialization code factored out to
476 (gdb_main): Wrap captured_main with TRY/CATCH instead of
478 * top.c (highest_ui_num): New global.
479 (new_ui): New function.
480 * top.h (struct ui) <num>: New field.
481 (new_ui): New declaration.
483 2016-06-21 Pedro Alves <palves@redhat.com>
485 * cli/cli-interp.c (cli_on_normal_stop): Bail out early if there's
486 nothing to print. Use should_print_stop_to_console.
487 * tui/tui-interp.c (tui_on_normal_stop): Likewise.
489 2016-06-21 Pedro Alves <palves@redhat.com>
491 * breakpoint.c (new_until_break_fsm): Add 'cmd_interp' parameter.
492 (until_break_fsm_should_stop, until_break_fsm_clean_up): Add
494 (until_break_command): Pass command interpreter to thread fsm
496 * cli/cli-interp.c (should_print_stop_to_console): Adjust.
497 * gdbthread.h (struct thread_control_state) <command_interp>:
499 * infcall.c (new_call_thread_fsm): Add 'cmd_interp' parameter.
501 (call_thread_fsm_should_stop): Add thread parameter.
502 (call_function_by_hand_dummy): Pass command interpreter to thread
503 fsm ctor. Pass thread pointer to fsm clean up method.
504 * infcmd.c: Include interps.h.
505 (struct step_command_fsm) <thread>: Delete field.
506 (new_step_command_fsm): Add 'cmd_interp' parameter. Pass it down.
507 (step_command_fsm_prepare): Remove references to fsm's thread
509 (step_1): Pass command interpreter to thread
510 fsm ctor. Pass thread pointer to fsm clean up method.
511 (step_command_fsm_should_stop, step_command_fsm_clean_up): Add
512 thread parameter and use it.
513 (new_until_next_fsm): Add 'cmd_interp' parameter. Pass it down.
514 (until_next_fsm_should_stop, until_next_fsm_clean_up): Add thread
515 parameter and use it.
516 (until_next_command): Pass command interpreter to thread fsm ctor.
517 (struct finish_command_fsm) <thread>: Delete field.
518 (finish_command_fsm_ops): Add NULL slot for should_notify_stop.
519 (new_finish_command_fsm): Add 'cmd_interp' parameter and pass it
520 down. Remove thread parameter and adjust.
521 (finish_command_fsm_should_stop, finish_command_fsm_clean_up): Add
522 thread parameter and use it.
523 (finish_command): Pass command interpreter to thread fsm ctor.
525 * infrun.c (follow_fork): Move thread fsm to child fork instead of
526 command interpreter, only.
527 (clear_proceed_status_thread): Remove reference to command_interp.
528 (proceed): Don't record the thread's command interpreter.
529 (clean_up_just_stopped_threads_fsms): Pass thread to fsm clean_up
531 (fetch_inferior_event): Pass thread to fsm should_stop method.
532 * thread-fsm.c (thread_fsm_ctor): Add 'cmd_interp' parameter.
534 (thread_fsm_clean_up, thread_fsm_should_stop): Add thread
535 parameter and pass it down.
536 * thread-fsm.h (struct thread_fsm) <command_interp>: New field.
537 (struct thread_fsm_ops) <clean_up, should_stop>: Add thread
539 (thread_fsm_ctor): Add 'cmd_interp' parameter.
540 (thread_fsm_clean_up, thread_fsm_should_stop): Add thread
542 * thread.c (thread_cancel_execution_command): Pass thread to
543 thread fsm clean_up method.
545 2016-06-21 Pedro Alves <palves@redhat.com>
547 * cli/cli-interp.c: Include gdbthread.h and thread-fsm.h.
548 (should_print_stop_to_console): New function, factored out from
550 * cli/cli-interp.h (should_print_stop_to_console): Declare.
551 * mi/mi-interp.c (mi_on_normal_stop_1): Use
552 should_print_stop_to_console. Pass it the current UI's console
554 * mi/mi-main.c (captured_mi_execute_command): Use the
555 INTERP_CONSOLE symbol rather than explicit "console".
557 2016-06-21 Pedro Alves <palves@redhat.com>
559 * infcmd.c (prepare_execution_command): Use
560 all_uis_on_sync_execution_starting.
561 * infrun.c (all_uis_on_sync_execution_starting): New function.
562 * infrun.h (all_uis_on_sync_execution_starting): Declare.
564 2016-06-21 Pedro Alves <palves@redhat.com>
566 * annotate.c: Include top.h.
567 (async_background_execution_p): Delete.
568 (print_value_flags): Check the UI's prompt state rather then
569 async_background_execution_p.
570 * event-loop.c (start_event_loop): Set the prompt state to
572 * event-top.c (display_gdb_prompt, async_enable_stdin)
573 (async_disable_stdin): Check the current UI's prompt state instead
574 of the sync_execution global.
575 (command_line_handler): Set the prompt state to PROMPT_NEEDED
576 before running a command, and display the prompt if still needed
578 * infcall.c (struct call_thread_fsm) <waiting_ui>: New field.
579 (new_call_thread_fsm): New parameter 'waiting_ui'. Store it.
580 (call_thread_fsm_should_stop): Set the prompt state to
582 (run_inferior_call): Adjust to temporarily set the prompt state to
583 PROMPT_BLOCKED instead of using the sync_execution global.
584 (call_function_by_hand_dummy): Pass the current UI to
586 * infcmd.c: Include top.h.
587 (continue_1): Check the current UI's prompt state instead of the
588 sync_execution global.
589 (continue_command): Validate global execution state before calling
590 prepare_execution_command.
591 (step_1): Call all_uis_check_sync_execution_done.
592 (attach_post_wait): Don't call async_enable_stdin here. Remove
593 reference to sync_execution.
594 * infrun.c (sync_execution): Delete global.
595 (follow_fork_inferior)
596 (reinstall_readline_callback_handler_cleanup): Check the current
597 UI's prompt state instead of the sync_execution global.
598 (check_curr_ui_sync_execution_done)
599 (all_uis_check_sync_execution_done): New functions.
600 (fetch_inferior_event): Call all_uis_check_sync_execution_done
601 instead of trying to determine whether the global sync execution
603 (handle_no_resumed): Check the prompt state of all UIs.
604 (normal_stop): Emit the no unwait-for even to all PROMPT_BLOCKED
605 UIs. Emit the "Switching to" notification to all UIs. Enable
607 * infrun.h (sync_execution): Delete.
608 (all_uis_check_sync_execution_done): Declare.
609 * main.c (captured_command_loop): Don't call
610 interp_pre_command_loop if the prompt is blocked.
611 (catch_command_errors, catch_command_errors_const): Adjust.
612 (captured_main): Set the initial prompt state to PROMPT_NEEDED.
613 * mi/mi-interp.c (display_mi_prompt): Set the prompt state to
615 (mi_interpreter_resume): Don't clear sync_execution. Remove hack
617 (mi_execute_command_input_handler): Set the prompt state to
618 PROMPT_NEEDED before executing the command, and only display the
619 prompt if the prompt state is PROMPT_NEEDED afterwards.
620 (mi_on_resume_1): Adjust to check the prompt state.
621 * target.c (target_terminal_inferior): Adjust to check the prompt
623 * top.c (wait_sync_command_done, maybe_wait_sync_command_done)
624 (execute_command): Check the current UI's prompt state instead of
626 * top.h (enum prompt_state): New.
627 (struct ui) <prompt_state>: New field.
628 (ALL_UIS): New macro.
630 2016-06-21 Pedro Alves <palves@redhat.com>
632 * top.c (gdb_secondary_prompt_depth): Delete.
633 (gdb_in_secondary_prompt_p): Add ui parameter. Use it.
634 (gdb_readline_wrapper_cleanup, gdb_readline_wrapper): Adjust to
635 per-UI gdb_secondary_prompt_depth.
636 * top.h (struct ui) <secondary_prompt_depth>: New field.
638 2016-06-21 Pedro Alves <palves@redhat.com>
640 * cli/cli-interp.c (cli_interpreter_pre_command_loop): New
642 (cli_interp_procs): Install it instead of cli_command_loop.
643 * cli/cli-interp.h (cli_interpreter_pre_command_loop): Declare.
644 * event-top.c (cli_command_loop): Delete.
645 * interps.c (interp_new): Remove reference to command_loop_proc.
646 (current_interp_command_loop): Delete.
647 (interp_pre_command_loop): New function.
648 (interp_command_loop_ftype): Delete.
649 * interps.h (interp_pre_command_loop_ftype): New typedef.
650 (struct interp_procs) <command_loop_proc>: Delele field.
651 <pre_command_loop_proc>: New field.
652 (current_interp_command_loop): Delete declaration.
653 (interp_pre_command_loop): New declaration.
654 * main.c (captured_command_loop): Call interp_pre_command_loop
655 instead of current_interp_command_loop and start an event loop.
656 * mi/mi-interp.c (mi_command_loop): Delete.
657 (mi_interpreter_pre_command_loop): New.
658 (mi_interp_procs): Update.
659 * tui/tui-interp.c (tui_interp_procs): Install
660 cli_interpreter_pre_command_loop instead of cli_command_loop.
662 2016-06-21 Pedro Alves <palves@redhat.com>
664 * interps.c (current_interpreter): New function.
665 * interps.h (current_interpreter): New declaration.
666 * mi/mi-cmds.h (raw_stdout): Delete declaration.
667 * mi/mi-common.h (struct mi_interp) <raw_stdout,
668 saved_raw_stdout>: New field.
669 * mi/mi-interp.c (display_mi_prompt): New parameter 'mi'. Adjust
670 to per-UI raw_stdout.
671 (mi_interpreter_init): Adjust to per-UI raw_stdout.
672 (mi_on_sync_execution_done, mi_execute_command_input_handler)
673 (mi_command_loop): Pass MI instance to display_mi_prompt.
674 (mi_on_normal_stop_1, mi_output_running_pid, mi_on_resume_1)
675 (mi_on_resume): Adjust to per-UI raw_stdout.
676 (saved_raw_stdout): Delete.
677 (mi_set_logging): Adjust to per-UI raw_stdout and
679 * mi/mi-main.c (raw_stdout): Delete.
680 (mi_cmd_gdb_exit, captured_mi_execute_command)
681 (mi_print_exception, mi_load_progress): Adjust to per-UI
683 (print_diff_now, mi_print_timing_maybe): New ui_file parameter.
685 (print_diff): New ui_file parameter. Send output there instead of
687 * mi/mi-main.h (struct ui_file): Forward declare.
688 (mi_print_timing_maybe): Add ui_file parameter.
690 2016-06-21 Pedro Alves <palves@redhat.com>
692 * mi/mi-interp.c (display_mi_prompt): New function.
694 2016-06-21 Pedro Alves <palves@redhat.com>
696 * target.c (target_terminal_inferior): Bail out after
697 unregistering input_fd if not on the main UI.
698 (target_terminal_ours): Bail out after registering input_fd if not
700 (target_terminal_ours_for_output): Bail out if not on the main UI.
702 2016-06-21 Pedro Alves <palves@redhat.com>
704 * event-top.c (restore_ui_cleanup): Make extern.
705 * infrun.c (fetch_inferior_event): Always switch to the main UI.
706 * top.h (restore_ui_cleanup): Declare.
708 2016-06-21 Pedro Alves <palves@redhat.com>
711 * cli/cli-interp.c: Include cli-interp.h and event-top.h.
712 (cli_interpreter_resume): Pass 1 to gdb_setup_readline. Set the
713 UI's input_handler here.
714 (cli_interpreter_supports_command_editing): New function.
715 (cli_interp_procs): Install it.
716 * cli/cli-interp.h: New file.
717 * event-top.c (async_command_editing_p): Rename to ...
718 (set_editing_cmd_var): ... this.
719 (change_line_handler): Add parameter 'editing', and use it. Bail
720 early if the interpreter doesn't support editing. Don't touch
721 readline state if editing is off.
722 (gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install)
723 (gdb_rl_callback_handler_reinstall): Assert the current UI is the
725 (display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if
726 not using readline. Check whether the current UI is using command
727 editing instead of checking the async_command_editing_p global.
728 (set_async_editing_command): Delete.
729 (gdb_setup_readline): Add 'editing' parameter. Only allow editing
730 on the main UI. Don't touch readline state if editing is off.
731 (gdb_disable_readline): Don't touch readline state if editing is
733 * event-top.h (gdb_setup_readline): Add 'int' parameter.
734 (set_async_editing_command): Delete declaration.
735 (change_line_handler, command_line_handler): Declare.
736 (async_command_editing_p): Rename to ...
737 (set_editing_cmd_var): ... this.
738 * infrun.c (reinstall_readline_callback_handler_cleanup): Check
739 whether the current UI has editing enabled rather than checking
740 the async_command_editing_p global.
741 * interps.c (interp_supports_command_editing): New function.
742 * interps.h (interp_supports_command_editing_ftype): New typedef.
743 (struct interp_procs) <supports_command_editing_proc>: New field.
744 (interp_supports_command_editing): Declare.
745 * mi/mi-interp.c (mi_interpreter_resume): Pass 0 to
746 gdb_setup_readline. Don't clear the async_command_editing_p
747 global. Update comments.
748 * top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check
749 whether the current UI has editing enabled rather than checking
750 the async_command_editing_p global. Don't touch readline state if
752 (undo_terminal_modifications_before_exit): Switch to the main UI.
753 Unconditionally call gdb_disable_readline.
754 (set_editing): New function.
755 (show_async_command_editing_p): Rename to ...
756 (show_editing): ... this. Show the state of the current UI.
757 (_initialize_top): Adjust.
758 * top.h (struct ui) <command_editing>: New field.
759 * tui/tui-interp.c: Include cli/cli-interp.h.
760 (tui_resume): Pass 1 to gdb_setup_readline. Set the UI's
762 (tui_interp_procs): Install
763 cli_interpreter_supports_command_editing.
764 * tui/tui-io.c (tui_getc): Check whether the current UI has
765 editing enabled rather than checking the async_command_editing_p
768 2016-06-21 Pedro Alves <palves@redhat.com>
770 * top.c: Call gen_ret_current_ui_field_ptr for current_uiout.
771 * top.h (struct ui) <m_current_uiout>: New field.
772 * ui-out.c (current_uiout): Delete.
773 * ui-out.h (current_uiout): Delete.
774 (current_ui_current_uiout_ptr): New declaration.
775 (current_uiout): Reimplement as wrapper around
776 current_ui_current_uiout_ptr.
778 2016-06-21 Pedro Alves <palves@redhat.com>
780 * ui-out.c (default_ui_out_impl): Delete.
782 (current_uiout): Set to NULL.
783 (default_table_begin, default_table_body, default_table_end)
784 (default_table_header, default_begin, default_end)
785 (default_field_int, default_field_skip, default_field_string)
786 (default_field_fmt, default_spaces, default_text, default_message)
787 (default_wrap_hint, default_flush, default_data_destroy): Delete.
789 2016-06-21 Pedro Alves <palves@redhat.com>
791 * event-top.c (gdb_setup_readline): Pass the UI's outstream and
792 errstream to stdout_fileopen and stderr_fileopen.
793 * exceptions.c: Include top.h.
794 (print_flush): Open the current UI's outstream file descriptor,
795 instead of hardcoding file descriptor 1.
796 * main.c (captured_main): Save the main UI's out and error
797 streams. Adjust stderr_fileopen call.
798 * top.h (struct ui) <outstream, errstream>: New fields.
799 * ui-file.c (stderr_fileopen): Add stream parameter. Use it
801 * ui-file.h (stderr_fileopen): Add stream parameter and update
804 2016-06-21 Pedro Alves <palves@redhat.com>
806 * event-top.c (input_fd): Delete.
807 (stdin_event_handler): Switch to the UI whose input descriptor got
808 the event. Adjust to per-UI input_fd.
809 (gdb_setup_readline): Don't set the input_fd global. Adjust to
811 (gdb_disable_readline): Adjust to per-UI input_fd.
812 * event-top.h (input_fd): Delete declaration.
813 * linux-nat.c (linux_nat_terminal_inferior): Don't remove input_fd
814 from the event-loop here.
815 (linux_nat_terminal_ours): Don't register input_fd in the
817 * main.c (captured_main): Adjust to per-UI input_fd.
818 * remote.c (remote_terminal_inferior): Don't remove input_fd from
820 (remote_terminal_ours): Don't register input_fd in the event-loop
822 * target.c: Include top.h and event-top.h.
823 (target_terminal_inferior): Remove input_fd from the event-loop
825 (target_terminal_ours): Register input_fd in the event-loop.
826 * top.h (struct ui) <input_fd>: New field.
828 2016-06-21 Pedro Alves <palves@redhat.com>
830 * cli/cli-script.c (execute_user_command, read_next_line)
831 (read_next_line): Adjust to per-UI instream.
832 * event-top.c (stdin_event_handler, command_handler)
833 (handle_line_of_input, command_line_handler)
834 (gdb_readline_no_editing_callback, async_sigterm_handler)
835 (gdb_setup_readline): Likewise.
836 * inflow.c: Include top.h.
837 (gdb_has_a_terminal, child_terminal_init_with_pgrp)
838 (gdb_save_tty_state, child_terminal_inferior)
839 (child_terminal_ours_1, copy_terminal_info): Use the main UI.
840 (initialize_stdin_serial): Adjust to per-UI instream.
841 * main.c (captured_command_loop, captured_main): Adjust to per-UI
843 * mi/mi-interp.c (mi_execute_command_wrapper): Likewise.
844 * python/python.c (python_interactive_command): Likewise.
845 * terminal.h (struct ui): Forward declare.
846 (initialize_stdin_serial): Add struct ui parameter.
847 * top.c (instream): Delete.
848 (do_restore_instream_cleanup, read_command_file, dont_repeat)
849 (gdb_readline_no_editing, command_line_input)
850 (input_from_terminal_p, gdb_init): Adjust to per-UI instream.
851 * top.h (struct ui) <instream>: New field.
852 (instream): Delete declaration.
853 (quit): Adjust to per-UI instream.
855 2016-06-21 Pedro Alves <palves@redhat.com>
857 * event-loop.c: Include top.h.
858 (invoke_async_signal_handlers): Switch to the main UI.
859 * event-top.c (main_ui_): Update comment.
860 (main_ui): New global.
861 * top.h (main_ui): Declare.
863 2016-06-21 Pedro Alves <palves@redhat.com>
865 * cli/cli-interp.c (cli_interp): Delete.
866 (as_cli_interp): New function.
867 (cli_on_normal_stop, cli_on_signal_received)
868 (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
869 (cli_on_no_history): Send output to all CLI UIs.
870 (cli_on_sync_execution_done, cli_on_command_error): Skip output if
871 the top level interpreter is not a CLI.
872 (cli_interpreter_init): Don't set cli_interp or install observers
874 (_initialize_cli_interp): Install observers here.
875 * event-top.c (main_ui_, ui_list): New globals.
876 (current_ui): Point to main_ui_.
877 (restore_ui_cleanup, switch_thru_all_uis_init)
878 (switch_thru_all_uis_cond, switch_thru_all_uis_next): New
880 * mi/mi-interp.c (as_mi_interp): New function.
881 (mi_interpreter_init): Don't install observers here.
882 (mi_on_sync_execution_done): Skip output if the top level
883 interpreter is not a MI.
884 (mi_new_thread, mi_thread_exit, mi_record_changed)
885 (mi_inferior_added, mi_inferior_appeared, mi_inferior_exit)
886 (mi_inferior_removed): Send output to all MI UIs.
887 (find_mi_interpreter, mi_interp_data): Delete.
888 (find_mi_interp): New function.
889 (mi_on_signal_received, mi_on_end_stepping_range)
890 (mi_on_signal_exited, mi_on_exited, mi_on_no_history): Send output
892 (mi_on_normal_stop): Rename to ...
893 (mi_on_normal_stop_1): ... this.
894 (mi_on_normal_stop): Reimplement, sending output to all MI UIs.
895 (mi_traceframe_changed, mi_tsv_created, mi_tsv_deleted)
896 (mi_tsv_modified, mi_breakpoint_created, mi_breakpoint_deleted)
897 (mi_breakpoint_modified, mi_output_running_pid): Send output to
899 (mi_on_resume): Rename to ...
900 (mi_on_resume_1): ... this. Don't handle infcalls here.
901 (mi_on_resume): Reimplement, sending output to all MI UIs.
902 (mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed)
903 (mi_memory_changed): Send output to all MI UIs.
904 (report_initial_inferior): Install observers here.
905 * top.h (struct ui) <next>: New field.
907 (struct switch_thru_all_uis): New.
908 (switch_thru_all_uis_init, switch_thru_all_uis_cond)
909 (switch_thru_all_uis_next): Declare.
910 (SWITCH_THRU_ALL_UIS): New macro.
911 * tui/tui-interp.c (tui_interp): Delete global.
912 (as_tui_interp): New function.
913 (tui_on_normal_stop, tui_on_signal_received)
914 (tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited)
915 (tui_on_no_history): Send output to all TUI UIs.
916 (tui_on_sync_execution_done, tui_on_command_error): Skip output if
917 the top level interpreter is not a TUI.
918 (tui_init): Don't set tui_interp or install observers here.
919 (_initialize_tui_interp): Install observers here.
921 2016-06-21 Pedro Alves <palves@redhat.com>
923 * cli/cli-interp.c (cli_uiout): Delete, moved into ...
924 (struct cli_interp): ... this new structure.
925 (cli_on_normal_stop, cli_on_signal_received)
926 (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
927 (cli_on_no_history): Use interp_ui_out.
928 (cli_interpreter_init): If top level, set the cli_interp global.
929 (cli_interpreter_init): Return the interp's data instead of NULL.
930 (cli_interpreter_resume, cli_interpreter_exec, cli_ui_out): Adjust
931 to cli_uiout being in the interpreter's data.
932 (cli_interp_procs): New, factored out from _initialize_cli_interp.
933 (cli_interp_factory): New function.
934 (_initialize_cli_interp): Call interp_factory_register.
935 * interps.c (get_interp_info): New, factored out from ...
936 (get_current_interp_info): ... this.
937 (interp_new): Add parameter 'data'. Store it.
938 (struct interp_factory): New function.
939 (interp_factory_p): New typedef. Define a VEC_P.
940 (interpreter_factories): New global.
941 (interp_factory_register): New function.
942 (interp_add): Add 'ui' parameter. Use get_interp_info and
943 interp_lookup_existing.
944 (interp_lookup): Rename to ...
945 (interp_lookup_existing): ... this. Add 'ui' parameter. Don't
946 check for NULL or empty name here.
947 (interp_lookup): Add 'ui' parameter and reimplement.
948 (interp_set_temp, interpreter_exec_cmd): Adjust.
949 (interpreter_completer): Complete on registered interpreter
950 factories instead of interpreters.
951 * interps.h (interp_factory_func): New typedef.
952 (interp_factory_register): Declare.
953 (interp_new, interp_add): Adjust.
954 (interp_lookup): Declare.
955 * main.c (captured_main): Adjust.
956 * mi/mi-interp.c (mi_cmd_interpreter_exec): Adjust.
957 (mi_interp_procs): New, factored out from
958 _initialize_mi_interp.
959 (mi_interp_factory): New function.
960 * python/python.c (execute_gdb_command): Adjust.
961 * tui/tui-interp.c (tui_init): If top level, set the tui_interp
963 (tui_interp_procs): New.
964 (tui_interp_factory): New function.
965 (_initialize_tui_interp): Call interp_factory_register.
967 2016-06-21 Pedro Alves <palves@redhat.com>
969 * breakpoint.c (bpstat_do_actions_1): Access the current UI's
970 async field instead of the interpreter_async global.
971 * cli/cli-script.c (execute_user_command, while_command)
972 (if_command, script_from_file): Likewise.
973 * compile/compile.c: Include top.h instead of interps.h.
974 (compile_file_command, compile_code_command)
975 (compile_print_command): Access the current UI's async field
976 instead of the interpreter_async global.
977 * guile/guile.c: Include top.h instead of interps.h.
978 (guile_repl_command, guile_command, gdbscm_execute_gdb_command):
979 Access the current UI's async field instead of the
980 interpreter_async global.
981 * guile/scm-ports.c: Include top.h instead of interps.h.
982 (ioscm_with_output_to_port_worker): Access the current UI's async
983 field instead of the interpreter_async global.
984 * inf-loop.c (inferior_event_handler): Likewise.
985 * infcall.c (run_inferior_call): Likewise.
986 * infrun.c (reinstall_readline_callback_handler_cleanup)
987 (fetch_inferior_event): Likewise.
988 * interps.c (interpreter_async): Delete.
989 (struct ui_interp_info): New.
990 (get_current_interp_info): New function.
991 (interp_list, current_interpreter, top_level_interpreter_ptr):
993 (interp_add, interp_set, interp_lookup, interp_ui_out)
994 (current_interp_set_logging, interp_set_temp)
995 (current_interp_named_p): Adjust to per-UI interpreters.
996 (command_interpreter): Delete.
997 (command_interp, current_interp_command_loop, interp_quiet_p)
998 (interp_exec, interpreter_exec_cmd, interpreter_completer)
999 (top_level_interpreter, top_level_interpreter_data): Adjust to
1000 per-UI interpreters.
1001 * interps.h (interpreter_async): Delete.
1002 * main.c (captured_command_loop): Access the current UI's async
1003 field instead of the interpreter_async global.
1004 * python/python.c (python_interactive_command, python_command)
1005 (execute_gdb_command): Likewise.
1006 * top.c (maybe_wait_sync_command_done, execute_command_to_string):
1007 Access the current UI's async field instead of the
1008 interpreter_async global.
1009 * top.h (struct tl_interp_info): Forward declare.
1010 (struct ui) <interp_info, async>: New fields.
1012 2016-06-21 Pedro Alves <palves@redhat.com>
1014 * main.c (gdb_stdout, gdb_stderr, gdb_stdlog, gdb_stdin): Delete
1016 (gen_ret_current_ui_field_ptr): New macro. Use it to generate
1017 wrappers for gdb_stdout, gdb_stderr, gdb_stdlog and gdb_stdin.
1018 * top.h (struct ui) <m_gdb_stdout, m_gdb_stdin, m_gdb_stderr,
1019 m_gdb_stdlog>: New fields.
1020 (current_ui_gdb_stdout_ptr, current_ui_gdb_stdin_ptr)
1021 (current_ui_gdb_stderr_ptr, current_ui_gdb_stdlog_ptr): Declare.
1022 (gdb_stdout, gdb_stdin, gdb_stderr, gdb_stdlog): Reimplement as
1025 2016-06-21 Pedro Alves <palves@redhat.com>
1027 * event-top.c: Update readline-related comments.
1028 (input_handler, call_readline): Delete globals.
1029 (gdb_rl_callback_handler): Call the current UI's input_handler
1031 (change_line_handler): Adjust to set current UI's properties
1033 (current_ui_, current_ui): New globals.
1034 (get_command_line_buffer): Rewrite to refer to the current UI.
1035 (stdin_event_handler): Adjust to call the call_readline method of
1037 (gdb_readline_no_editing_callback): Adjust to call the current UI's
1038 input_handler method.
1039 (gdb_setup_readline): Adjust to set current UI's properties
1041 * event-top.h (call_readline, input_handler): Delete declarations.
1042 * mi/mi-interp.c (mi_interpreter_resume): Adjust to set current
1043 UI's properties instead of globals.
1044 * top.c (gdb_readline_wrapper_cleanup): Adjust to set current UI's
1045 properties instead of globals.
1046 (gdb_readline_wrapper): Adjust to call and set current UI's
1047 methods instead of globals.
1048 * top.h: Include buffer.h and event-loop.h.
1049 (struct ui): New struct.
1050 (current_ui): New declaration.
1052 2016-06-21 Pedro Alves <palves@redhat.com>
1054 * ada-lang.c (ada_exception_name_addr_1): Add comment.
1055 (print_it_exception): Select the current frame.
1057 2016-06-17 Yan-Ting Lin <currygt52@gmail.com>
1059 * Makefile.in (ALL_TARGET_OBS): Add nds32-tdep.o.
1060 (HFILES_NO_SRCDIR): Add nds32-tdep.h.
1061 (ALLDEPFILES): Add nds32-tdep.c.
1062 * NEWS: Mention new NDS32 port.
1063 * configure.tgt: Add NDS32.
1064 * nds32-tdep.c: New file.
1065 * nds32-tdep.h: New file.
1066 * features/Makefile (XMLTOC): Add nds32.xml.
1067 * features/nds32-core.xml: New file.
1068 * features/nds32-fpu.xml: New file.
1069 * features/nds32-system.xml: New file.
1070 * features/nds32.c: New file (generated).
1071 * features/nds32.xml: New file.
1073 2016-06-14 John Baldwin <jhb@FreeBSD.org>
1075 * v850-tdep.c (v850_use_struct_convention): Trim type length checks.
1077 2016-06-14 John Baldwin <jhb@FreeBSD.org>
1079 * tui/tui-stack.c (tui_show_frame_info): Fix type mismatch.
1081 2016-06-14 John Baldwin <jhb@FreeBSD.org>
1083 * rs6000-tdep.c (ppc_process_record_op31): Initialize ra.
1085 2016-06-13 Nick Clifton <nickc@redhat.com>
1087 * gdbtypes.c (replace_type): Fix assertion.
1089 2016-06-10 Tom Tromey <tom@tromey.com>
1091 * gdbtypes.c (arch_type, arch_integer_type, arch_character_type)
1092 (arch_boolean_type, arch_float_type, arch_complex_type)
1093 (arch_flags_type, append_flags_type_field)
1094 (append_flags_type_flag, arch_composite_type)
1095 (append_composite_type_field_raw)
1096 (append_composite_type_field_aligned)
1097 (append_composite_type_field): Make "name" parameter const.
1098 * gdbtypes.h (arch_type, arch_integer_type, arch_character_type)
1099 (arch_boolean_type, arch_float_type, arch_complex_type)
1100 (append_composite_type_field, append_composite_type_field_aligned)
1101 (append_composite_type_field_raw, arch_flags_type)
1102 (append_flags_type_field, append_flags_type_flag): Constify.
1104 2016-06-10 Tom Tromey <tom@tromey.com>
1107 * rust-exp.y (lex_number): Don't truncate large numbers to i32.
1109 2016-06-10 Tom Tromey <tom@tromey.com>
1111 * Makefile.in (COMMON_OBS): Remove rust-exp.o.
1112 (YYFILES): Add rust-exp.c.
1113 (YYOBJ): Add rust-exp.o.
1114 (local-maintainer-clean): Remove rust-exp.c.
1116 2016-06-09 Toshihito Kikuchi <k.toshihito@yahoo.de>
1118 * NEWS: Mention that GDB now supports a negative repeat count in
1120 * printcmd.c (decode_format): Allow '-' in the parameter
1121 "string_ptr" to accept a negative repeat count.
1122 (find_instruction_backward): New function.
1123 (read_memory_backward): New function.
1124 (integer_is_zero): New function.
1125 (find_string_backward): New function.
1126 (do_examine): Use new functions to examine memory backward.
1127 (_initialize_printcmd): Mention that 'x' command supports a negative
1130 2016-06-09 Toshihito Kikuchi <k.toshihito@yahoo.de>
1132 * MAINTAINERS (Write After Approval): Add Toshihito Kikuchi.
1134 2016-06-09 Tom Tromey <tom@tromey.com>
1137 * python/py-xmethods.c (invoke_method_name)
1138 (py_get_result_type_method_name, py_invoke_method_name): Remove.
1139 (gdbpy_initialize_xmethods): Don't initialize
1140 py_invoke_method_name, py_get_result_type_method_name.
1142 2016-06-07 Simon Marchi <simon.marchi@ericsson.com>
1144 * mi/mi-interp.c (mi_record_changed): Add missing braces.
1146 2016-06-07 Bernhard Heckel <bernhard.heckel@intel.com>
1148 * findvar.c (follow_static_link): Check for valid pointer.
1150 2016-06-06 Simon Marchi <simon.marchi@ericsson.com>
1152 * NEWS: Mention the new fields in =record-started.
1153 * common/btrace-common.h (btrace_format_short_string): New function
1155 * common/btrace-common.c (btrace_format_short_string): New
1157 * mi/mi-interp.c (mi_record_changed): Output method and format
1158 fields in the =record-started record.
1159 * record-btrace.c (record_btrace_open): Adapt record_changed
1161 * record-full.c (record_full_open): Likewise.
1162 * record.c (cmd_record_stop): Likewise.
1164 2016-06-02 Jon Turney <jon.turney@dronecode.org.uk>
1166 * windows-nat.c (handle_output_debug_string): Return type of
1167 gdb_signal_from_host() is gdb_signal, not an int.
1168 (windows_get_exec_module_filename): Add pointer casts for C++.
1170 2016-06-02 Tom Tromey <tom@tromey.com>
1173 * python/python.c (gdbpy_solib_name): Use GDB_PY_LLU_ARG.
1175 2016-06-01 Pedro Alves <palves@redhat.com>
1177 * remote-fileio.c (remote_fio_ctrl_c_flag, remote_fio_sa)
1179 (remote_fio_ofunc, remote_fileio_sig_init, remote_fileio_sig_set)
1180 (remote_fileio_sig_exit, remote_fileio_ctrl_c_signal_handler):
1182 (remote_fileio_o_quit_handler): New global.
1183 (remote_fileio_quit_handler): New function.
1184 (remote_fileio_reply): Check the quit flag instead of the custom
1185 'remote_fio_ctrl_c_flag' flag. Restore the quit handler instead
1186 of changing the SIGINT handler.
1187 (do_remote_fileio_request): Override the quit handler instead of
1188 changing the SIGINT handler.
1190 2016-06-01 Nick Clifton <nickc@redhat.com>
1192 * common/common-utils.c (xmalloc_failed): New function. Provided
1193 so that the version in libiberty is not linked in.
1195 2016-06-01 Markus Metzger <markus.t.metzger@intel.com>
1197 * infcmd.c (skip_finish_frames): New.
1198 (finish_command): Call skip_finish_frames.
1200 2016-06-01 Yao Qi <yao.qi@linaro.org>
1203 * remote-fileio.c (remote_fileio_ctrl_c_signal_handler): Call
1204 quit_serial_event_set.
1206 2016-06-01 Joel Brobecker <brobecker@adacore.com>
1208 GDB 7.11.1 released.
1210 2016-05-31 Martin Galvan <martin.galvan@tallertechnologies.com>
1213 * dwarf2loc.c (coerce_pieced_ref, indirect_synthetic_pointer,
1214 fetch_const_value_from_synthetic_pointer): New functions.
1215 (indirect_pieced_value): Move lower half to indirect_synthetic_pointer.
1216 (pieced_value_funcs): Implement coerce_ref.
1217 * valops.c (value_addr): Call coerce_ref for synthetic references.
1218 * valprint.c (valprint_check_validity): Return true for synthetic
1219 references. Also, don't show "<synthetic pointer>" if they reference
1221 (generic_val_print_ref): Handle synthetic references. Also move some
1222 code to print_ref_address.
1223 (print_ref_address, get_value_addr_contents): New functions.
1225 2016-05-30 Jan Kratochvil <jan.kratochvil@redhat.com>
1228 * dwarf2read.c (enum pc_bounds_kind): Add PC_BOUNDS_INVALID.
1229 (process_psymtab_comp_unit_reader, read_func_scope): Adjust callers.
1230 (read_lexical_block_scope): Import DIEs from bare DW_TAG_lexical_block.
1231 (read_call_site_scope): Adjust callers.
1232 (dwarf2_get_pc_bounds): Implement pc_bounds_invalid.
1233 (dwarf2_get_subprogram_pc_bounds, get_scope_pc_bounds): Adjust callers.
1235 2016-05-30 Jan Kratochvil <jan.kratochvil@redhat.com>
1237 Code cleanup: dwarf2_get_pc_bounds: -1/0/+1 -> enum
1238 * dwarf2read.c (enum pc_bounds_kind) New.
1239 (dwarf2_get_pc_bounds): Use it in the declaration.
1240 (process_psymtab_comp_unit_reader): Adjust caller. Rename has_pc_info
1242 (read_func_scope, read_lexical_block_scope, read_call_site_scope):
1244 (dwarf2_get_pc_bounds): Use enum pc_bounds_kind in the definition.
1245 (dwarf2_get_subprogram_pc_bounds, get_scope_pc_bounds): Adjust callers.
1247 2016-05-29 Jan Kratochvil <jan.kratochvil@redhat.com>
1249 * NEWS (QCatchSyscalls): Remove the parameter. Include ...
1250 (QCatchSyscalls:1 in qSupported) ... this separate entry which got
1253 2016-05-29 Jan Kratochvil <jan.kratochvil@redhat.com>
1255 * NEWS (N stop reply): Remove empty line.
1257 2016-05-28 Alan Modra <amodra@gmail.com>
1259 * compile/compile-object-load.c (link_callbacks_multiple_definition,
1260 link_callbacks_warning, link_callbacks_undefined_symbol,
1261 link_callbacks_undefined_symbol, link_callbacks_reloc_overflow,
1262 link_callbacks_reloc_dangerous,
1263 link_callbacks_unattached_reloc): Return void.
1265 2016-05-27 Andrew Burgess <andrew.burgess@embecosm.com>
1267 * opencl-lang.c (evaluate_subexp_opencl): If
1268 EVAL_AVOID_SIDE_EFFECTS mode, forward the VALUE_LVAL attribute to
1269 the returned value in the STRUCTOP_STRUCT case.
1271 2016-05-27 Andrew Burgess <andrew.burgess@embecosm.com>
1273 * eval.c (evaluate_subexp_standard): If EVAL_AVOID_SIDE_EFFECTS
1274 mode, forward the VALUE_LVAL attribute to the returned value in
1275 the STRUCTOP_PTR case.
1277 2016-05-25 Tom Tromey <tom@tromey.com>
1279 * python/py-value.c (value_object_as_number): Use correct spelling
1280 of HAVE_LIBPYTHON2_4.
1282 2016-05-25 Bernhard Heckel <bernhard.heckel@intel.com>
1284 * f-typeprint.c (f_type_print_base): Replace 0 by show.
1286 2016-05-25 Bernhard Heckel <bernhard.heckel@intel.com>
1288 * f-typeprint.c (f_type_print_base): Decrease show by one.
1290 2016-05-25 Bernhard Heckel <bernhard.heckel@intel.com>
1292 * f-typeprint.c (f_type_print_base): Don't print fields when show < 0.
1294 2016-05-25 Bernhard Heckel <bernhard.heckel@intel.com>
1296 * f-typeprint.c (f_type_print_base): Take print level into account.
1298 2016-05-24 Tom Tromey <tom@tromey.com>
1301 * python/py-value.c (value_object_as_number): Add
1302 nb_inplace_floor_divide, nb_inplace_true_divide, nb_index.
1304 2016-05-24 Tom Tromey <tom@tromey.com>
1306 * python/py-value.c (value_object_as_number): Add
1307 nb_inplace_divide for Python 2.
1309 2016-05-23 Tom Tromey <tom@tromey.com>
1312 * python/py-breakpoint.c (gdbpy_breakpoints): Return a new tuple
1313 when there are no breakpoints.
1315 2016-05-24 Pedro Alves <palves@redhat.com>
1318 * linux-nat.c (attach_proc_task_lwp_callback): Mark the lwp
1319 resumed, and add the thread to GDB's thread list.
1321 2016-05-24 Pedro Alves <palves@redhat.com>
1324 * linux-nat.c (get_pending_status): If the thread reported the
1325 event to the core and it's pending, use the pending status signal
1328 2016-05-24 Pedro Alves <palves@redhat.com>
1331 * linux-nat.c (lwp_lwpid_htab): New htab.
1332 (lwp_info_hash, lwp_lwpid_htab_eq, lwp_lwpid_htab_create)
1333 (lwp_lwpid_htab_add_lwp): New functions.
1334 (lwp_list): Tweak comment.
1335 (lwp_list_add, lwp_list_remove, lwp_lwpid_htab_remove_pid): New
1337 (purge_lwp_list): Rewrite, using htab_traverse_noresize.
1338 (add_initial_lwp): Add lwp to htab too. Use lwp_list_add.
1339 (delete_lwp): Use lwp_list_remove. Remove htab too.
1340 (find_lwp_pid): Search in htab.
1341 (_initialize_linux_nat): Call lwp_lwpid_htab_create.
1342 * linux-nat.h (struct lwp_info) <prev>: New field.
1344 2016-05-24 Pedro Alves <palves@redhat.com>
1347 * linux-nat.c (lwp_lwpid_htab): New htab.
1348 (lwp_info_hash, lwp_lwpid_htab_eq, lwp_lwpid_htab_create)
1349 (lwp_lwpid_htab_add_lwp): New functions.
1350 (lwp_list): Tweak comment.
1351 (lwp_list_add, lwp_list_remove, lwp_lwpid_htab_remove_pid): New
1353 (purge_lwp_list): Rewrite, using htab_traverse_noresize.
1354 (add_initial_lwp): Add lwp to htab too. Use lwp_list_add.
1355 (delete_lwp): Use lwp_list_remove. Remove htab too.
1356 (find_lwp_pid): Search in htab.
1357 (_initialize_linux_nat): Call lwp_lwpid_htab_create.
1358 * linux-nat.h (struct lwp_info) <prev>: New field.
1360 2016-05-24 Pedro Alves <palves@redhat.com>
1363 * linux-nat.c (linux_resume_one_lwp_throw): Clear the LWP's core
1365 (linux_nat_update_thread_list): Don't fetch the core if already
1368 2016-05-24 Pedro Alves <palves@redhat.com>
1371 * linux-tdep.c (find_mapping_size): Delete.
1372 (linux_vsyscall_range_raw): Rewrite reading from
1373 /proc/PID/task/PID/maps directly instead of using
1374 gdbarch_find_memory_regions.
1376 2016-05-24 Pedro Alves <palves@redhat.com>
1379 * linux-nat.c (report_thread_events): New global.
1380 (linux_handle_extended_wait): Report
1381 TARGET_WAITKIND_THREAD_CREATED if thread event reporting is
1383 (wait_lwp, linux_nat_filter_event): Report all thread exits if
1384 thread event reporting is enabled. Remove comment.
1385 (filter_exit_event): New function.
1386 (linux_nat_wait_1): Use it.
1387 (linux_nat_thread_events): New function.
1388 (linux_nat_add_target): Install it as target_thread_events method.
1390 2016-05-24 Yan-Ting Lin <currygt52@gmail.com>
1392 * MAINTAINERS (Write After Approval): Add "Yan-Ting Lin".
1394 2016-05-23 Yao Qi <yao.qi@arm.com>
1396 * arch-utils.c (default_code_of_frame_writable): New function.
1397 * arch-utils.h (default_code_of_frame_writable): Declare.
1398 * arm-tdep.c (arm_code_of_frame_writable): New function.
1399 (arm_gdbarch_init): Install gdbarch method
1400 code_of_frame_writable if the target is M-profile.
1401 * frame.c (skip_unwritable_frames): New function.
1402 * frame.h (skip_unwritable_frames): Declare.
1403 * gdbarch.sh (code_of_frame_writable): New.
1404 * gdbarch.c, gdbarch.h: Re-generated.
1405 * infcmd.c (finish_command): Call skip_unwritable_frames.
1407 2016-05-23 Tom Tromey <tom@tromey.com>
1409 PR python/19438, PR python/18393:
1410 * python/py-objfile.c (objfpy_initialize): Initialize self->dict.
1411 * python/py-progspace.c (pspy_initialize): Initialize self->dict.
1413 2016-05-23 Gary Benson <gbenson@redhat.com>
1415 * nat/gdb_thread_db.h (td_thr_validate_ftype): Remove typedef.
1416 * linux-thread-db.c (struct thread_db_info) <td_thr_validate_p>:
1418 (try_thread_db_load_1): Remove td_thr_validate initialization.
1420 2016-05-23 Jon Boden <jon@ubuntubsd.org> (tiny change)
1422 * configure.ac: Search for libutil-freebsd as alternative to libutil.
1423 * configure: Re-generated.
1425 2016-05-19 Andreas Schwab <schwab@suse.de>
1427 * ia64-libunwind-tdep.c (libunwind_descr): Add cast from void *.
1428 (libunwind_frame_set_descr): Likewise.
1429 (libunwind_frame_cache): Likewise.
1430 (libunwind_frame_dealloc_cache): Likewise.
1431 (libunwind_frame_sniffer): Likewise.
1432 (libunwind_search_unwind_table): Likewise.
1433 (libunwind_sigtramp_frame_sniffer): Likewise.
1434 (libunwind_get_reg_special): Likewise.
1435 (libunwind_load): Likewise.
1436 * ia64-linux-nat.c (ia64_linux_fetch_register): Likewise.
1437 (ia64_linux_store_register): Likewise.
1438 (ia64_linux_xfer_partial): Likewise.
1439 * ia64-tdep.c (ia64_access_reg): Likewise.
1440 (ia64_access_fpreg): Likewise.
1441 (ia64_access_rse_reg): Likewise.
1442 (ia64_access_rse_fpreg): Likewise.
1444 2016-05-18 Tom Tromey <tom@tromey.com>
1446 * rust-lang.c (rust_subscript): Initialize "high".
1448 2016-05-17 Simon Marchi <simon.marchi@ericsson.com>
1451 * mi/mi-main.c (mi_on_resume): Call target_can_async_p instead
1452 of target_is_async_p.
1454 2016-05-17 Simon Marchi <simon.marchi@ericsson.com>
1457 * mi/mi-main.c (run_one_inferior): Use run target to determine
1458 whether to run async or not.
1459 (mi_cmd_exec_run): Likewise.
1461 2016-05-17 Tom Tromey <tom@tromey.com>
1463 * std-operator.def (OP_RANGE): Rename from OP_F90_RANGE.
1464 * rust-lang.c: Don't include f-lang.h.
1465 (rust_range, rust_compute_range, rust_subscript)
1466 (rust_evaluate_subexp): Update.
1467 * rust-exp.y: Don't include f-lang.h.
1468 (ast_range, convert_ast_to_expression): Update.
1469 * parse.c (operator_length_standard): Update.
1470 * f-lang.h (enum f90_range_type): Move to expression.h.
1471 * f-exp.y: Use OP_RANGE.
1472 * expression.h (enum range_type): New enum; renamed from
1474 * expprint.c: Don't include f-lang.h.
1475 (print_subexp_standard, dump_subexp_body_standard): Use OP_RANGE.
1476 * eval.c (value_f90_subarray, evaluate_subexp_standard): Update.
1478 2016-05-17 Tom Tromey <tom@tromey.com>
1480 * NEWS: Add Rust item.
1482 2016-05-17 Tom Tromey <tom@tromey.com>
1483 Manish Goregaokar <manishsmail@gmail.com>
1485 * symtab.c (symbol_find_demangled_name): Handle Rust.
1486 * symfile.c (init_filename_language_table): Treat ".rs" as Rust.
1487 * std-operator.def (STRUCTOP_ANONYMOUS, OP_RUST_ARRAY): New
1489 * rust-lang.h: New file.
1490 * rust-lang.c: New file.
1491 * rust-exp.y: New file.
1492 * dwarf2read.c (read_file_scope): Add Rust producer sniffing.
1493 (dwarf2_compute_name, read_func_scope, read_structure_type)
1494 (read_base_type, read_subrange_type, set_cu_language)
1495 (new_symbol_full, determine_prefix): Handle Rust.
1496 * defs.h (enum language) <language_rust>: New constant.
1497 * Makefile.in (SFILES): Add rust-exp.y, rust-lang.c.
1498 (COMMON_OBS): Add rust-exp.o, rust-lang.o.
1500 2016-05-17 Tom Tromey <tom@tromey.com>
1502 * valprint.h (struct generic_val_print_array) <array_start,
1503 array_end>: New fields.
1504 * valprint.c (generic_val_print_array): Add "decorations"
1505 parameter. Use "array_start", "array_end".
1506 (generic_val_print) <TYPE_CODE_ARRAY>: Update.
1507 * p-valprint.c (p_decorations): Update.
1508 * m2-valprint.c (m2_decorations): Update.
1509 * f-valprint.c (f_decorations): Update.
1510 * c-valprint.c (c_decorations): Update.
1512 2016-05-17 Tom Tromey <tom@tromey.com>
1514 * NEWS: Add "maint selftest" entry.
1515 * selftest.h: New file.
1516 * selftest.c: New file.
1517 * maint.c: Include selftest.h.
1518 (maintenance_selftest): New function.
1519 (_initialize_maint_cmds): Add "maint selftest" command.
1520 * configure.ac (GDB_SELF_TEST): Maybe define.
1521 * config.in, configure: Rebuild.
1522 * Makefile.in (SFILES): Add selftest.c.
1523 (COMMON_OBS): Add selftest.o.
1525 2016-05-17 Tom Tromey <tom@tromey.com>
1527 * expprint.c: Include f-lang.h.
1528 (print_subexp_standard, dump_subexp_body_standard): Handle
1531 2016-05-17 Tom Tromey <tom@tromey.com>
1533 * Makefile.in (init.c): Search .y files for initialization
1536 2016-05-12 Doug Evans <dje@google.com>
1539 * dwarf2loc.c (dwarf2_find_location_expression): For DWO files still
1542 2016-05-10 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
1544 * iq2000-tdep.c (iq2000_scan_prologue): Remove if that shouldn't guard
1546 * linespec.c (add_sal_to_sals): Restore call to symtab_to_fullname.
1548 2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com>
1550 * arm-tdep.c (arm_elf_make_msymbol_special): Use
1551 ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol.
1553 2016-05-07 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
1555 * aarch64-linux-tdep.c (aarch64_linux_sigframe_init): Remove unused
1557 * aarch64-tdep.c (aarch64_skip_prologue): Likewise.
1558 (aarch64_scan_prologue): Likewise.
1559 (aarch64_prologue_prev_register): Likewise.
1560 (aarch64_dwarf2_prev_register): Likewise.
1561 (pass_in_v): Likewise.
1562 (aarch64_push_dummy_call): Likewise.
1563 (aarch64_breakpoint_from_pc): Likewise.
1564 (aarch64_return_in_memory): Likewise.
1565 (aarch64_return_value): Likewise.
1566 (aarch64_displaced_step_b_cond): Likewise.
1567 (aarch64_displaced_step_cb): Likewise.
1568 (aarch64_displaced_step_tb): Likewise.
1569 (aarch64_gdbarch_init): Likewise.
1570 (aarch64_process_record): Likewise.
1571 * alpha-mdebug-tdep.c (alpha_mdebug_init_abi): Likewise.
1572 * alpha-tdep.c (_initialize_alpha_tdep): Likewise.
1573 * amd64-dicos-tdep.c (amd64_dicos_init_abi): Likewise.
1574 * amd64-linux-tdep.c (amd64_dtrace_parse_probe_argument): Likewise.
1575 * amd64-tdep.c (fixup_riprel): Likewise.
1576 * amd64-windows-tdep.c (amd64_windows_frame_decode_epilogue): Likewise.
1577 (amd64_windows_frame_decode_insns): Likewise.
1578 (amd64_windows_frame_cache): Likewise.
1579 (amd64_windows_frame_prev_register): Likewise.
1580 (amd64_windows_frame_this_id): Likewise.
1581 (amd64_windows_init_abi): Likewise.
1582 * arm-linux-tdep.c (arm_linux_get_syscall_number): Likewise.
1583 (arm_linux_get_next_pcs_syscall_next_pc): Likewise.
1584 * arm-symbian-tdep.c (arm_symbian_init_abi): Likewise.
1585 * arm-tdep.c (arm_make_epilogue_frame_cache): Likewise.
1586 (arm_epilogue_frame_prev_register): Likewise.
1587 (arm_record_vdata_transfer_insn): Likewise.
1588 (arm_record_exreg_ld_st_insn): Likewise.
1589 * auto-load.c (execute_script_contents): Likewise.
1590 (print_scripts): Likewise.
1591 * avr-tdep.c (avr_frame_prev_register): Likewise.
1592 (avr_push_dummy_call): Likewise.
1593 * bfin-linux-tdep.c (bfin_linux_sigframe_init): Likewise.
1594 * bfin-tdep.c (bfin_gdbarch_init): Likewise.
1595 * blockframe.c (find_pc_partial_function_gnu_ifunc): Likewise.
1596 * break-catch-throw.c (fetch_probe_arguments): Likewise.
1597 * breakpoint.c (breakpoint_xfer_memory): Likewise.
1598 (breakpoint_init_inferior): Likewise.
1599 (breakpoint_inserted_here_p): Likewise.
1600 (software_breakpoint_inserted_here_p): Likewise.
1601 (hardware_breakpoint_inserted_here_p): Likewise.
1602 (bpstat_what): Likewise.
1603 (break_range_command): Likewise.
1604 (save_breakpoints): Likewise.
1605 * coffread.c (coff_symfile_read): Likewise.
1606 * cris-tdep.c (cris_push_dummy_call): Likewise.
1607 (cris_scan_prologue): Likewise.
1608 (cris_register_size): Likewise.
1609 (_initialize_cris_tdep): Likewise.
1610 * d-exp.y: Likewise.
1611 * dbxread.c (dbx_read_symtab): Likewise.
1612 (process_one_symbol): Likewise.
1613 (coffstab_build_psymtabs): Likewise.
1614 (elfstab_build_psymtabs): Likewise.
1615 * dicos-tdep.c (dicos_init_abi): Likewise.
1616 * disasm.c (do_mixed_source_and_assembly): Likewise.
1617 (gdb_disassembly): Likewise.
1618 * dtrace-probe.c (dtrace_process_dof): Likewise.
1619 * dwarf2read.c (error_check_comp_unit_head): Likewise.
1620 (build_type_psymtabs_1): Likewise.
1621 (skip_one_die): Likewise.
1622 (process_imported_unit_die): Likewise.
1623 (dwarf2_physname): Likewise.
1624 (read_file_scope): Likewise.
1625 (setup_type_unit_groups): Likewise.
1626 (create_dwo_cu_reader): Likewise.
1627 (create_dwo_cu): Likewise.
1628 (create_dwo_unit_in_dwp_v1): Likewise.
1629 (create_dwo_unit_in_dwp_v2): Likewise.
1630 (lookup_dwo_unit_in_dwp): Likewise.
1631 (free_dwo_file): Likewise.
1632 (check_producer): Likewise.
1633 (dwarf2_add_typedef): Likewise.
1634 (dwarf2_add_member_fn): Likewise.
1635 (read_unsigned_leb128): Likewise.
1636 (read_signed_leb128): Likewise.
1637 (dwarf2_const_value): Likewise.
1638 (follow_die_sig_1): Likewise.
1639 (dwarf_decode_macro_bytes): Likewise.
1640 * extension.c (restore_active_ext_lang): Likewise.
1641 * frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Likewise.
1642 * ft32-tdep.c (ft32_analyze_prologue): Likewise.
1643 * gdbtypes.c (lookup_typename): Likewise.
1644 (resolve_dynamic_range): Likewise.
1645 (check_typedef): Likewise.
1646 * h8300-tdep.c (h8300_is_argument_spill): Likewise.
1647 (h8300_gdbarch_init): Likewise.
1648 * hppa-tdep.c (hppa32_push_dummy_call): Likewise.
1649 (hppa_frame_this_id): Likewise.
1650 (_initialize_hppa_tdep): Likewise.
1651 * hppanbsd-tdep.c (hppanbsd_sigtramp_cache_init): Likewise.
1652 * hppaobsd-tdep.c (hppaobsd_supply_fpregset): Likewise.
1653 * i386-dicos-tdep.c (i386_dicos_init_abi): Likewise.
1654 * i386-tdep.c (i386_bnd_type): Likewise.
1655 (i386_gdbarch_init): Likewise.
1656 (i386_mpx_bd_base): Likewise.
1657 * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Likewise.
1658 * i386obsd-tdep.c (i386obsd_elf_init_abi): Likewise.
1659 * ia64-tdep.c (examine_prologue): Likewise.
1660 (ia64_frame_cache): Likewise.
1661 (ia64_push_dummy_call): Likewise.
1662 * infcmd.c (finish_command_fsm_async_reply_reason): Likewise.
1663 (default_print_one_register_info): Likewise.
1664 * infrun.c (infrun_thread_ptid_changed): Likewise.
1665 (thread_still_needs_step_over): Likewise.
1666 (stop_all_threads): Likewise.
1667 (restart_threads): Likewise.
1668 (keep_going_stepped_thread): Likewise.
1669 * iq2000-tdep.c (iq2000_scan_prologue): Likewise.
1670 * language.c (language_init_primitive_type_symbols): Likewise.
1671 * linespec.c (add_sal_to_sals): Likewise.
1672 * linux-nat.c (status_callback): Likewise.
1673 (kill_unfollowed_fork_children): Likewise.
1674 (linux_nat_kill): Likewise.
1675 * linux-tdep.c (linux_fill_prpsinfo): Likewise.
1676 * linux-thread-db.c (thread_db_notice_clone): Likewise.
1677 (record_thread): Likewise.
1678 * location.c (string_to_event_location_basic): Likewise.
1679 * m32c-tdep.c (m32c_prev_register): Likewise.
1680 * m32r-linux-tdep.c (m32r_linux_init_abi): Likewise.
1681 * m32r-tdep.c (decode_prologue): Likewise.
1682 * m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise.
1683 * machoread.c (macho_symtab_read): Likewise.
1684 (macho_symfile_read): Likewise.
1685 (macho_symfile_offsets): Likewise.
1686 * maint.c (set_per_command_cmd): Likewise.
1687 * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise.
1688 (mi_cmd_stack_list_variables): Likewise.
1689 * mi/mi-main.c (mi_cmd_exec_run): Likewise.
1690 (output_register): Likewise.
1691 (mi_cmd_execute): Likewise.
1692 (mi_cmd_trace_define_variable): Likewise.
1693 (print_variable_or_computed): Likewise.
1694 * minsyms.c (prim_record_minimal_symbol_full): Likewise.
1695 * mn10300-tdep.c (mn10300_frame_prev_register): Likewise.
1696 * msp430-tdep.c (msp430_pseudo_register_write): Likewise.
1697 * mt-tdep.c (mt_registers_info): Likewise.
1698 * nios2-tdep.c (nios2_analyze_prologue): Likewise.
1699 (nios2_push_dummy_call): Likewise.
1700 (nios2_frame_unwind_cache): Likewise.
1701 (nios2_stub_frame_cache): Likewise.
1702 (nios2_stub_frame_sniffer): Likewise.
1703 (nios2_gdbarch_init): Likewise.
1704 * ppc-ravenscar-thread.c: Likewise.
1705 * ppcfbsd-tdep.c (ppcfbsd_sigtramp_frame_cache): Likewise.
1706 * python/py-evts.c (add_new_registry): Likewise.
1707 * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
1708 (bpfinishpy_detect_out_scope_cb): Likewise.
1709 * python/py-framefilter.c (py_print_value): Likewise.
1710 * python/py-inferior.c (infpy_write_memory): Likewise.
1711 * python/py-infevents.c (create_inferior_call_event_object): Likewise.
1712 * python/py-infthread.c (thpy_get_ptid): Likewise.
1713 * python/py-linetable.c (ltpy_get_pcs_for_line): Likewise.
1714 (ltpy_get_all_source_lines): Likewise.
1715 (ltpy_is_valid): Likewise.
1716 (ltpy_iternext): Likewise.
1717 * python/py-symtab.c (symtab_and_line_to_sal_object): Likewise.
1718 * python/py-unwind.c (pyuw_object_attribute_to_pointer): Likewise.
1719 (unwind_infopy_str): Likewise.
1720 * python/py-varobj.c (py_varobj_get_iterator): Likewise.
1721 * ravenscar-thread.c (ravenscar_inferior_created): Likewise.
1722 * rs6000-aix-tdep.c (rs6000_push_dummy_call): Likewise.
1723 * rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Likewise.
1724 * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Likewise.
1725 * s390-linux-tdep.c (s390_supply_tdb_regset): Likewise.
1726 (s390_frame_prev_register): Likewise.
1727 (s390_dwarf2_frame_init_reg): Likewise.
1728 (s390_record_vr): Likewise.
1729 (s390_process_record): Likewise.
1730 * score-tdep.c (score_push_dummy_call): Likewise.
1731 (score3_analyze_prologue): Likewise.
1732 * sh-tdep.c (sh_extract_return_value_nofpu): Likewise.
1733 * sh64-tdep.c (sh64_analyze_prologue): Likewise.
1734 (sh64_push_dummy_call): Likewise.
1735 (sh64_extract_return_value): Likewise.
1736 (sh64_do_fp_register): Likewise.
1737 * solib-aix.c (solib_aix_get_section_offsets): Likewise.
1738 * solib-darwin.c (darwin_read_exec_load_addr_from_dyld): Likewise.
1739 (darwin_solib_read_all_image_info_addr): Likewise.
1740 * solib-dsbt.c (enable_break): Likewise.
1741 * solib-frv.c (enable_break2): Likewise.
1742 (frv_fdpic_find_canonical_descriptor): Likewise.
1743 * solib-svr4.c (svr4_handle_solib_event): Likewise.
1744 * sparc-tdep.c (sparc_skip_stack_check): Likewise.
1745 * sparc64-linux-tdep.c (sparc64_linux_get_longjmp_target): Likewise.
1746 * sparcobsd-tdep.c (sparc32obsd_init_abi): Likewise.
1747 * spu-tdep.c (info_spu_dma_cmdlist): Likewise.
1748 * stack.c (read_frame_local): Likewise.
1749 * symfile.c (symbol_file_add_separate): Likewise.
1750 (remove_symbol_file_command): Likewise.
1751 * symmisc.c (maintenance_print_one_line_table): Likewise.
1752 * symtab.c (symbol_cache_flush): Likewise.
1753 (basic_lookup_transparent_type): Likewise.
1754 (sort_search_symbols_remove_dups): Likewise.
1755 * target.c (target_memory_map): Likewise.
1756 (target_detach): Likewise.
1757 (target_resume): Likewise.
1758 (acquire_fileio_fd): Likewise.
1759 (target_store_registers): Likewise.
1760 * thread.c (print_thread_info_1): Likewise.
1761 * tic6x-tdep.c (tic6x_analyze_prologue): Likewise.
1762 * tilegx-linux-tdep.c (tilegx_linux_sigframe_init): Likewise.
1763 * tilegx-tdep.c (tilegx_push_dummy_call): Likewise.
1764 (tilegx_analyze_prologue): Likewise.
1765 (tilegx_stack_frame_destroyed_p): Likewise.
1766 (tilegx_frame_cache): Likewise.
1767 * tracefile.c (trace_save): Likewise.
1768 * tracepoint.c (encode_actions_and_make_cleanup): Likewise.
1769 (start_tracing): Likewise.
1770 (print_one_static_tracepoint_marker): Likewise.
1771 * tui/tui.c (tui_enable): Likewise.
1772 * valops.c (value_struct_elt_bitpos): Likewise.
1773 (find_overload_match): Likewise.
1774 (find_oload_champ): Likewise.
1775 * value.c (value_contents_copy_raw): Likewise.
1776 * windows-tdep.c (windows_get_tlb_type): Likewise.
1777 * x86-linux-nat.c (x86_linux_enable_btrace): Likewise.
1778 * xcoffread.c (record_minimal_symbol): Likewise.
1779 (scan_xcoff_symtab): Likewise.
1780 * xtensa-tdep.c (execute_code): Likewise.
1781 (xtensa_gdbarch_init): Likewise.
1782 (_initialize_xtensa_tdep): Likewise.
1784 2016-05-04 Ulrich Weigand <uweigand@de.ibm.com>
1786 * spu-linux-nat.c (spu_bfd_iovec_pread): Add pointer cast for C++.
1787 (spu_bfd_open): Likewise.
1789 2016-05-04 Yao Qi <yao.qi@linaro.org>
1792 * corefile.c (read_memory): Rename it to ...
1793 (read_memory_object): ... it. Add parameter object.
1794 (read_memory): Call read_memory_object.
1795 (read_stack): Likewise.
1796 (read_code): Likewise.
1798 2016-05-03 Yunlian Jiang <yunlian@google.com>
1799 Doug Evans <dje@google.com>
1802 * dwarf2read.c (open_and_init_dwp_file): Look at backlink if objfile
1803 is separate debug file.
1805 2016-05-03 Don Breazeal <donb@codesourcery.com>
1807 * serial.h (gdb_pipe): Fix argument names in comment.
1809 2016-05-03 Pedro Alves <palves@redhat.com>
1812 * python/python.c (_initialize_python) [IS_PY3K]: xstrdup/xfree
1815 2016-05-03 Pedro Alves <palves@redhat.com>
1817 * python/python.c (_initialize_python) [IS_PY3K]: Remove dead
1820 2016-05-03 Pedro Alves <palves@redhat.com>
1822 * configure.ac (PYTHON_LIBS): Sed away "-Xlinker -export-dynamic".
1823 * configure: Regenerate.
1825 2016-05-03 Pedro Alves <palves@redhat.com>
1827 * configure.ac (checking for the dynamic export flag): Add
1828 $PYTHON_CPPFLAGS to CPPFLAGS.
1829 * configure: Regenerate.
1831 2016-05-03 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
1833 * symfile.c (find_pc_overlay): Add braces to avoid -Wparentheses
1835 (find_pc_mapped_section): Likewise.
1836 (list_overlays_command): Likewise.
1838 2016-05-02 Eli Zaretskii <eliz@gnu.org>
1840 * windows-nat.c (_initialize_check_for_gdb_ini): Fix off-by-one
1841 error in allocation of space for "$HOME/.gdbinit" string. This
1842 caused GDB to abort on startup whenever a '~/gdb.ini' file was
1843 actually found, because xsnprintf would hit an assertion
1846 2016-04-28 Simon Marchi <simon.marchi@ericsson.com>
1848 * cli/cli-decode.c (help_cmd_list): Do not list commands that
1851 2016-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
1853 * remote.c (remote_start_remote): Detect PACKET_vFile_setfs.support.
1855 2016-04-27 Martin Galvan <martin.galvan@tallertechnologies.com>
1857 * c-valprint.c (c_value_print): Always convert val back to reference
1858 type if we converted it to a pointer type.
1860 2016-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
1862 * configure.ac: Enhance configure check for babeltrace to reject
1863 non-C++-enabled versions.
1864 * configure: Regenerate.
1866 2016-04-26 Sanimir Agovic <sanimir.agovic@intel.com>
1867 Keven Boell <keven.boell@intel.com>
1868 Bernhard Heckel <bernhard.heckel@intel.com>
1870 * f-valprint.c (f77_create_arrayprint_offset_tbl): Remove
1872 (F77_DIM_SIZE, F77_DIM_OFFSET): Remove macro.
1873 (f77_print_array_1): Use value_subscript to subscript a
1875 (f77_print_array): Remove call to f77_create_arrayprint_offset_tbl.
1876 (f_val_print): Use value_field to construct a field value.
1878 2016-04-26 Bernhard Heckel <bernhard.heckel@intel.com>
1880 * valarith.c (value_address): Resolve dynamic types.
1882 2016-04-26 Bernhard Heckel <bernhard.heckel@intel.com>
1883 Keven Boell <kevel.boell@intel.com>
1885 * NEWS: Add new supported features for fortran.
1886 * gdbtypes.c (remove_dyn_prop): New.
1887 (resolve_dynamic_struct): Keep type length for fortran structs.
1888 * gdbtypes.h: Forward declaration of new function.
1889 * value.c (value_address): Return dynamic resolved location of a value.
1890 (set_value_component_location): Adjust the value address
1891 for single value prints.
1892 (value_primitive_field): Support value types with a dynamic location.
1893 (set_internalvar): Remove dynamic location property of
1896 2016-04-25 Pedro Alves <palves@redhat.com>
1897 Yao Qi <yao.qi@linaro.org>
1899 * mem-break.c (set_raw_breakpoint_at): Create a raw breakpoint
1900 object. Insert it if it is not inserted yet. Increase the
1901 refcount and link it into the proc's raw breakpoint list.
1903 2016-04-25 Yao Qi <yao.qi@linaro.org>
1905 * breakpoint.c (should_be_inserted): Return 0 if the location's
1906 owner is not single step breakpoint or single step breakpoint's
1907 thread isn't the thread which is stepping past a breakpoint.
1908 * gdbarch.sh (software_single_step): Update comments.
1909 * gdbarch.h: Regenerated.
1910 * infrun.c (struct step_over_info) <thread>: New field.
1911 (set_step_over_info): New argument 'thread'. Callers updated.
1912 (clear_step_over_info): Set field thread to -1.
1913 (thread_is_stepping_over_breakpoint): New function.
1914 * infrun.h (thread_is_stepping_over_breakpoint): Declaration.
1916 2016-04-22 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
1918 * ppc-linux-nat.c (ppc_linux_read_description): Use PPC_FEATURE_HAS_VSX
1919 and PPC_FEATURE_HAS_ALTIVEC to check if such features are available.
1921 2016-04-22 Yao Qi <yao.qi@linaro.org>
1923 * valops.c (read_value_memory): New local variable 'stack'.
1924 Set it to either TARGET_OBJECT_STACK_MEMORY or
1925 TARGET_OBJECT_MEMORY.
1927 2016-04-22 Pedro Alves <palves@redhat.com>
1929 * ada-exp.y: Remove all yy symbol remappings.
1930 (GDB_YY_REMAP_PREFIX): Define.
1931 Include "yy-remap.h".
1932 * ada-lang.c (ada_language_defn): Adjust.
1933 * ada-lang.h (ada_error): Rename to ...
1934 (ada_yyerror): ... this.
1935 * c-exp.y: Remove all yy symbol remappings.
1936 (GDB_YY_REMAP_PREFIX): Define.
1937 Include "yy-remap.h".
1938 * c-lang.c (c_language_defn, cplus_language_defn)
1939 (asm_language_defn, minimal_language_defn): Adjust.
1940 * c-lang.h (c_error): Rename to ...
1941 (c_yyerror): ... this.
1942 * d-exp.y: Remove all yy symbol remappings.
1943 (GDB_YY_REMAP_PREFIX): Define.
1944 Include "yy-remap.h".
1945 * d-lang.c (d_language_defn): Adjust.
1946 * d-lang.h (d_error): Rename to ...
1947 (d_yyerror): ... this.
1948 * f-exp.y: Remove all yy symbol remappings.
1949 (GDB_YY_REMAP_PREFIX): Define.
1950 Include "yy-remap.h".
1951 * f-lang.c (f_language_defn): Adjust.
1952 * f-lang.h (f_error): Rename to ...
1953 (f_yyerror): ... this.
1954 * go-exp.y: Remove all yy symbol remappings.
1955 (GDB_YY_REMAP_PREFIX): Define.
1956 Include "yy-remap.h".
1957 * go-lang.c (go_language_defn): Adjust.
1958 * go-lang.h (go_error): Rename to ...
1959 (go_yyerror): ... this.
1960 * jv-exp.y: Remove all yy symbol remappings.
1961 (GDB_YY_REMAP_PREFIX): Define.
1962 Include "yy-remap.h".
1963 * jv-lang.c (java_language_defn): Adjust.
1964 * jv-lang.h (java_error): Rename to ...
1965 (java_yyerror): ... this.
1966 * m2-exp.y: Remove all yy symbol remappings.
1967 (GDB_YY_REMAP_PREFIX): Define.
1968 Include "yy-remap.h".
1969 * m2-lang.c (m2_language_defn): Adjust.
1970 * m2-lang.h (m2_error): Rename to ...
1971 (m2_yyerror): ... this.
1972 * objc-exp.y: Remove all yy symbol remappings.
1973 (GDB_YY_REMAP_PREFIX): Define.
1974 Include "yy-remap.h".
1975 * objc-lang.c (objc_language_defn): Adjust.
1976 * opencl-lang.c (opencl_language_defn): Adjust.
1977 * p-exp.y: Remove all yy symbol remappings.
1978 (GDB_YY_REMAP_PREFIX): Define.
1979 Include "yy-remap.h".
1980 * p-lang.c (pascal_language_defn): Adjust.
1981 * p-lang.h (pascal_error): Rename to ...
1982 (pascal_yyerror): ... this.
1983 * yy-remap.h: New file.
1985 2016-04-22 Pedro Alves <palves@redhat.com>
1987 * common/common-exceptions.h (GDB_XCPT_TRY): Remove mention of
1988 the foreign frames issue.
1989 [__cplusplus] (GDB_XCPT): Define as GDB_XCPT_TRY.
1991 2016-04-22 Pedro Alves <palves@redhat.com>
1993 * common/common-exceptions.c (enum catcher_state, struct catcher)
1994 (current_catcher): Define in C++ mode too.
1995 (exceptions_state_mc_catch): Call throw_exception_sjlj instead of
1997 (throw_exception_sjlj, throw_exception_cxx): New functions,
1998 factored out from throw_exception.
1999 (throw_exception): Reimplement.
2000 * common/common-exceptions.h (exceptions_state_mc_init)
2001 (exceptions_state_mc_action_iter)
2002 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
2003 Declare in C++ mode too.
2004 (TRY): Rename to ...
2005 (TRY_SJLJ): ... this.
2006 (CATCH): Rename to ...
2007 (CATCH_SJLJ): ... this.
2008 (END_CATCH): Rename to ...
2009 (END_CATCH_SJLJ): ... this.
2010 [GDB_XCPT == GDB_XCPT_SJMP] (TRY, CATCH, END_CATCH): Map to SJLJ
2012 (throw_exception): Update comments.
2013 (throw_exception_sjlj): Declare.
2014 * event-top.c (gdb_rl_callback_read_char_wrapper): Extend intro
2015 comment. Wrap body in TRY_SJLJ/CATCH_SJLJ and rethrow any
2016 intercepted exception.
2017 (gdb_rl_callback_handler): New function.
2018 (gdb_rl_callback_handler_install): Always install
2019 gdb_rl_callback_handler as readline callback.
2021 2016-04-22 Pedro Alves <palves@redhat.com>
2023 * event-top.c (rl_callback_read_char_wrapper): Rename to ...
2024 (gdb_rl_callback_read_char_wrapper): ... this.
2025 (change_line_handler, gdb_setup_readline): Adjust.
2027 2016-04-22 Yao Qi <yao.qi@linaro.org>
2029 * aarch32-linux-nat.c (aarch32_gp_regcache_supply): Clear CPSR
2032 2016-04-22 Joel Brobecker <brobecker@adacore.com>
2034 * MAINTAINER: Remove myself as AIX Maintainer.
2036 2016-04-22 Maciej W. Rozycki <macro@imgtec.com>
2038 * mips-tdep.c (mips_gdbarch_init): For GDB_OSABI_LINUX set
2039 `num_regs' to 90 rather than 79. Where a target description is
2040 present adjust the setting appropriately.
2042 2016-04-21 Pedro Alves <palves@redhat.com>
2044 * common/common-exceptions.h (GDB_XCPT_TRY): Add comment.
2045 (GDB_XCPT): Always define as GDB_XCPT_SJMP.
2047 2016-04-21 Pedro Alves <palves@redhat.com>
2049 * aix-thread.c (pdc_read_data, pdc_write_data): Add cast.
2050 (aix_thread_resume): Use PTRACE_TYPE_ARG5.
2051 * rs6000-nat.c (rs6000_ptrace64): Use PTRACE_TYPE_ARG5.
2052 (rs6000_ptrace_ldinfo): Change type of 'ldi' local to void
2053 pointer, and cast return to gdb_byte pointer.
2055 2016-04-21 Pedro Alves <palves@redhat.com>
2057 * s390-linux-nat.c (fetch_regset, store_regset, check_regset): Use
2058 void * instead of gdb_byte *.
2060 2016-04-21 Pedro Alves <palves@redhat.com>
2062 * dwarf2read.c (try_open_dwop_file, open_dwo_file)
2063 (file_file_name, file_full_name): Add char * cast to sentinel in
2064 concat/reconcat calls.
2065 * event-top.c (top_level_prompt): Likewise.
2066 * guile/guile.c (initialize_scheme_side): Likewise.
2067 * linux-tdep.c (linux_fill_prpsinfo): Likewise.
2068 * macrotab.c (macro_source_fullname): Likewise.
2069 * main.c (get_init_files, captured_main): Likewise.
2070 * psymtab.c (psymtab_to_fullname): Likewise.
2071 * python/python.c (_initialize_python)
2072 (gdbpy_finish_initialization): Likewise.
2073 * source.c (symtab_to_fullname): Likewise.
2075 2016-04-20 Pedro Alves <palves@redhat.com>
2077 * build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Default to yes.
2078 * configure: Renegerate.
2080 2016-04-20 Pedro Alves <palves@redhat.com>
2082 * darwin-nat.c (darwin_decode_message): Use gdb_signal_from_host.
2084 2016-04-20 Pedro Alves <palves@redhat.com>
2086 * aarch64-tdep.c (aarch64_record_load_store): Change type of
2087 'reg_rm_val' local to ULONGEST.
2089 2016-04-20 Pedro Alves <palves@redhat.com>
2091 * darwin-nat.c (darwin_resume_thread): Add uintptr_t cast.
2093 2016-04-20 Doug Evans <xdje42@gmail.com>
2095 * symmisc.c (dump_symtab_1): Print owning compunit for identical
2098 2016-04-20 Yao Qi <yao.qi@linaro.org>
2100 * aarch32-linux-nat.c: Include "arch/arm-linux.h".
2102 2016-04-20 Yao Qi <yao.qi@linaro.org>
2104 * arm-linux-tdep.h (ARM_CPSR_GREGNUM): Move it to ...
2105 * arch/arm-linux.h: ... here.
2107 2016-04-19 John Baldwin <jhb@FreeBSD.org>
2109 * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers): Change xstateregs
2111 (amd64bsd_store_inferior_registers): Likewise.
2112 * fbsd-nat.c (resume_one_thread_cb): Explicitly cast data to ptid_t *.
2113 (resume_all_threads_cb): Likewise.
2114 * i386bsd-nat.c (i386bsd_supply_gregset): Cast gregs to char *.
2115 (i386bsd_collect_gregset): Likewise.
2116 (i386bsd_fetch_inferior_registers): Change xstateregs to void *.
2117 (i386bsd_store_inferior_registers): Likewise.
2119 2016-04-19 John Baldwin <jhb@FreeBSD.org>
2121 * main.c (setup_alternate_signal_stack): Cast to char *.
2123 2016-04-19 Doug Evans <xdje42@gmail.com>
2125 * symmisc.c (dump_symtab_1, dump_symtab): Delete arg objfile.
2126 All callers updated.
2128 2016-04-19 Doug Evans <xdje42@gmail.com>
2131 * source.c (is_regular_file): New arg errno_ptr.
2132 All callers updated.
2134 2016-04-19 Andreas Arnez <arnez@linux.vnet.ibm.com>
2136 * linux-record.c (record_linux_system_call): Merge handling for
2137 readlink/recv/read and pipe/pipe2.
2139 2016-04-14 Walfred Tedeschi <walfred.tedeschi@intel.com>
2141 * features/i386/amd64-mpx-linux.xml: Remove AVX feature.
2142 * features/i386/amd64-mpx.xml: Remove AVX feature.
2143 * features/i386/i386-mpx-linux.xml: Remove AVX feature.
2144 * features/i386/i386-mpx.xml: Remove AVX feature.
2145 * features/i386/amd64-mpx-linux.c: Regenerate.
2146 * features/i386/amd64-mpx.c: Regenerate.
2147 * features/i386/i386-mpx-linux.c: Regenerate.
2148 * features/i386/i386-mpx.c: Regenerate.
2149 * regformats/i386/amd64-mpx-linux.dat: Regenerate.
2150 * regformats/i386/amd64-mpx.dat: Regenerate.
2151 * regformats/i386/i386-mpx-linux.dat: Regenerate.
2152 * regformats/i386/i386-mpx.dat: Regenerate.
2154 2016-04-16 Walfred Tedeschi <walfred.tedeschi@intel.com>
2156 * amd64-linux-tdep.c (features/i386/amd64-avx-mpx-linux.c):
2158 (amd64_linux_core_read_description): Add case for
2159 X86_XSTATE_AVX_MPX_MASK.
2160 (_initialize_amd64_linux_tdep): Call initialize_tdesc_amd64_avx_mpx_linux.
2161 * amd64-linux-tdep.h (tdesc_amd64_avx_mpx_linux): New definition.
2162 * amd64-tdep.c (features/i386/amd64-avx-mpx.c): New include.
2163 (amd64_target_description): Add case for X86_XSTATE_AVX_MPX_MASK.
2164 (_initialize_amd64_tdep): Call initialize_tdesc_amd64_avx_mpx.
2165 * common/x86-xstate.h (X86_XSTATE_MPX_MASK): Remove AVX bits.
2166 (X86_XSTATE_AVX_MPX_MASK): New case.
2167 * features/Makefile (i386/i386-avx-mpx, i386/i386-avx-mpx-linux)
2168 (i386/amd64-avx-mpx, i386/amd64-avx-mpx-linux): New rules.
2169 (i386/i386-avx-mpx-expedite, i386/i386-avx-mpx-linux-expedite)
2170 (i386/amd64-avx-mpx-expedite, i386/amd64-avx-mpx-linux-expedite):
2172 * i386-linux-tdep.c (features/i386/i386-avx-mpx-linux.c): New
2174 (i386_linux_core_read_description): Add case
2175 X86_XSTATE_AVX_MPX_MASK.
2176 (_initialize_i386_linux_tdep): Call
2177 initialize_tdesc_i386_avx_mpx_linux.
2178 * i386-linux-tdep.h (tdesc_i386_avx_mpx_linux): New include.
2179 * i386-tdep.c (features/i386/i386-avx-mpx.c): New include.
2180 (i386_target_description): Add case for X86_XSTATE_AVX_MPX_MASK.
2181 * x86-linux-nat.c (x86_linux_read_description): Add case for
2182 X86_XSTATE_AVX_MPX_MASK.
2183 * features/i386/amd64-avx-mpx-linux.xml: New file.
2184 * features/i386/i386-avx-mpx-linux.xml: New file.
2185 * features/i386/i386-avx-mpx.xml: New file.
2186 * features/i386/amd64-avx-mpx.xml: New file.
2187 * features/i386/amd64-avx-mpx-linux.c: Generated.
2188 * features/i386/amd64-avx-mpx.c: Generated.
2189 * features/i386/i386-avx-mpx-linux.c: Generated.
2190 * features/i386/i386-avx-mpx.c: Generated.
2191 * regformats/i386/amd64-avx-mpx-linux.dat: Generated.
2192 * regformats/i386/amd64-avx-mpx.dat: Generated.
2193 * regformats/i386/i386-avx-mpx-linux.dat: Generated.
2194 * regformats/i386/i386-avx-mpx.dat: Generated.
2196 2016-04-18 Pedro Alves <palves@redhat.com>
2198 * ptrace.m4 (GDB_AC_PTRACE): Don't run tests in C++ mode.
2199 * configure: Regenerate.
2201 2016-04-18 Martin Galvan <martin.galvan@tallertechnologies.com>
2203 * valops.c (value_addr): For C++ references, set the copied value's
2204 enclosing_type as well.
2206 2016-04-18 Yao Qi <yao.qi@linaro.org>
2209 2016-04-15 Yao Qi <yao.qi@linaro.org>
2211 * arm-tdep.c (thumb_stack_frame_destroyed_p): Return zero if
2212 PC is far from the end of function.
2214 2016-04-16 Pedro Alves <palves@redhat.com>
2216 * ada-exp.y (yydefred): Define as ada_yydefred.
2218 2016-04-15 Pedro Alves <palves@redhat.com>
2220 * ada-lang.c (ada_lookup_struct_elt_type): Constify 'type_str' and
2223 2016-04-15 Pedro Alves <palves@redhat.com>
2225 * btrace.c (pt_btrace_insn_flags): Change return type to
2226 btrace_insn_flags. Use btrace_insn_flags for local.
2228 2016-04-15 Pedro Alves <palves@redhat.com>
2230 * nat/linux-ptrace.h [__mips__] (GDB_ARCH_IS_TRAP_BRKPT): Also
2232 [__mips__] (GDB_ARCH_IS_TRAP_HWBKPT): Also accept TRAP_HWBKPT.
2234 2016-04-15 Yao Qi <yao.qi@linaro.org>
2236 * arm-tdep.c (thumb_stack_frame_destroyed_p): Return zero if
2237 PC is far from the end of function.
2239 2016-04-14 Pedro Alves <palves@redhat.com>
2241 * cli/cli-cmds.c (alias_usage_error): New function.
2242 (alias_command): Use it.
2243 * ctf.c (ctf_save_metadata_header): Inline metadata_fmt local in
2244 ctf_save_write_metadata call.
2246 2016-04-14 Pedro Alves <palves@redhat.com>
2248 * ada-typeprint.c (print_fixed_point_type): Don't pass float as
2249 argument to function expecting LONGEST.
2250 * value.c (unpack_long): Add casts to LONGEST.
2252 2016-04-13 Luis Machado <lgustavo@codesourcery.com>
2254 * exec.c (exec_file_locate_attach): Guard a couple functions
2255 that can throw errors.
2256 (exception_print_same): New helper function.
2258 2016-04-13 Pedro Alves <palves@redhat.com>
2261 * remote.c (struct remote_state) <last_resume_exec_dir>: New
2263 (new_remote_state): Default last_resume_exec_dir to EXEC_FORWARD.
2264 (remote_open_1): Reset last_resume_exec_dir to EXEC_FORWARD.
2265 (remote_resume): Store the last execution direction.
2266 (remote_execution_direction): New function.
2267 (init_remote_ops): Install it as to_execution_direction target_ops
2270 2016-04-12 Pedro Alves <palves@redhat.com>
2272 * common/common-exceptions.h (GDB_XCPT_TRY): Update comment.
2273 [__cplusplus] (GDB_XCPT): Define as GDB_XCPT_TRY.
2275 2016-04-12 Pedro Alves <palves@redhat.com>
2277 * common/common-exceptions.c (struct catcher) <buf>: Now a
2278 'jmp_buf' instead of SIGJMP_BUF.
2279 (exceptions_state_mc_init): Change return type to 'jmp_buf'.
2280 (throw_exception): Use longjmp instead of SIGLONGJMP.
2281 * common/common-exceptions.h: Include <setjmp.h> instead of
2283 (exceptions_state_mc_init): Change return type to 'jmp_buf'.
2284 [GDB_XCPT == GDB_XCPT_SJMP] (TRY): Use setjmp instead of
2286 * cp-support.c: Include "gdb_setjmp.h".
2288 2016-04-12 Pedro Alves <palves@redhat.com>
2290 * common/common-exceptions.c (exception_rethrow): Remove
2291 prepare_to_throw_exception call.
2292 * common/common-exceptions.h (prepare_to_throw_exception): Delete
2294 * exceptions.c (prepare_to_throw_exception): Delete.
2296 2016-04-12 Pedro Alves <palves@redhat.com>
2298 * target.c (target_check_pending_interrupt): Delete.
2299 * target.h (struct target_ops) <to_check_pending_interrupt>:
2301 (target_check_pending_interrupt): Remove declaration.
2302 * target-delegates.c: Regenerate.
2304 2016-04-12 Pedro Alves <palves@redhat.com>
2306 * defs.h: Update comments on SIGINT handling.
2307 (immediate_quit): Delete declaration.
2308 * event-loop.c (call_async_signal_handler): Delete.
2309 * event-loop.h (call_async_signal_handler): Delete declaration.
2310 (mark_async_signal_handler): Update comments.
2311 (gdb_call_async_signal_handler): Delete declaration.
2312 * event-top.c (handle_sigint): Call mark_async_signal_handler
2313 instead of gdb_call_async_signal_handler.
2314 * exceptions.c (prepare_to_throw_exception): Remove reference to
2316 (exception_fprintf): Remove comments about immediate_quit.
2317 * mingw-hdep.c (sigint_event, sigint_handler): Delete.
2318 (gdb_select): Don't wait on sigint_event.
2319 (gdb_call_async_signal_handler): Delete.
2320 (_initialize_mingw_hdep): Delete.
2321 * posix-hdep.c (gdb_call_async_signal_handler): Delete.
2322 * utils.c (immediate_quit): Delete.
2324 2016-04-12 Pedro Alves <palves@redhat.com>
2326 * defs.h (quit_handler_ftype, quit_handler)
2327 (make_cleanup_override_quit_handler, default_quit_handler): New.
2328 (QUIT): Adjust comments.
2329 * event-top.c (default_quit_handler): New function.
2330 (quit_handler): New global.
2331 (struct quit_handler_cleanup_data): New.
2332 (restore_quit_handler, restore_quit_handler_dtor)
2333 (make_cleanup_override_quit_handler): New.
2334 (async_request_quit): Call QUIT.
2335 * remote.c (struct remote_state) <got_ctrlc_during_io>: New field.
2336 (async_sigint_remote_twice_token, async_sigint_remote_token):
2338 (remote_close): Update comments.
2339 (remote_start_remote): Don't set immediate_quit. Set starting_up
2341 (remote_serial_quit_handler, remote_unpush_and_throw): New
2343 (remote_open_1): Clear got_ctrlc_during_io. Set
2344 remote_async_terminal_ours_p unconditionally.
2345 (async_initialize_sigint_signal_handler)
2346 (async_handle_remote_sigint, async_handle_remote_sigint_twice)
2347 (remote_check_pending_interrupt, async_remote_interrupt)
2348 (async_remote_interrupt_twice)
2349 (async_cleanup_sigint_signal_handler, ofunc)
2350 (sync_remote_interrupt, sync_remote_interrupt_twice): Delete.
2351 (remote_terminal_inferior, remote_terminal_ours): Remove async
2353 (remote_wait_as): Don't install a SIGINT handler in sync mode.
2354 (readchar, remote_serial_write): Override the quit handler with
2355 remote_serial_quit_handler.
2356 (getpkt_or_notif_sane_1): Don't call QUIT.
2357 (initialize_remote_ops): Don't install
2358 remote_check_pending_interrupt.
2359 (_initialize_remote): Don't create async_sigint_remote_token and
2360 async_sigint_remote_twice_token.
2361 * ser-base.c (ser_base_wait_for): Call QUIT and use
2362 interruptible_select.
2363 (ser_base_write): Call QUIT.
2364 * ser-go32.c (dos_readchar, dos_write): Call QUIT.
2365 * ser-unix.c (wait_for): Don't use VTIME. Always take the
2366 gdb_select path, but call QUIT and interruptible_select.
2367 * utils.c (maybe_quit): Call the current quit handler. Don't call
2368 target_check_pending_interrupt.
2369 (defaulted_query, prompt_for_continue): Override the quit handler
2370 with the default quit handler.
2372 2016-04-12 Pedro Alves <palves@redhat.com>
2374 * tui/tui-hooks.c (tui_target_has_run): Delete.
2375 (tui_about_to_proceed): Delete.
2376 (tui_about_to_proceed_observer): Delete.
2377 (tui_install_hooks, tui_remove_hooks): Don't install/remove an
2378 about_to_proceed observer.
2380 2016-04-12 Pedro Alves <palves@redhat.com>
2382 * mi/mi-interp.c (mi_new_thread): Put
2383 target_terminal_ours_for_output in effect while outputting.
2384 (mi_thread_exit): Use target_terminal_ours_for_output instead of
2385 target_terminal_ours.
2386 (mi_record_changed, mi_inferior_added, mi_inferior_appeared)
2387 (mi_inferior_exit, mi_inferior_removed, mi_traceframe_changed)
2388 (mi_tsv_created, mi_tsv_deleted, mi_tsv_modified)
2389 (mi_breakpoint_created, mi_breakpoint_deleted)
2390 (mi_breakpoint_modified, mi_solib_loaded, mi_solib_unloaded)
2391 (mi_command_param_changed, mi_memory_changed)
2392 (report_initial_inferior): Use target_terminal_ours_for_output
2393 instead of target_terminal_ours. Restore terminal settings.
2394 * mi/mi-main.c (mi_execute_command): Use
2395 target_terminal_ours_for_output instead of target_terminal_ours.
2396 Restore terminal settings.
2398 2016-04-12 Pedro Alves <palves@redhat.com>
2401 * gnu-nat.c (inf_validate_task_sc): Don't call
2402 target_terminal_ours / target_terminal_inferior around query.
2403 * i386-tdep.c (i386_record_lea_modrm, i386_process_record): Don't
2404 call target_terminal_ours / target_terminal_inferior around
2406 * linux-record.c (record_linux_system_call): Don't call
2407 target_terminal_ours / target_terminal_inferior around yquery.
2408 * nto-procfs.c (interrupt_query): Don't call target_terminal_ours
2409 / target_terminal_inferior around query.
2410 * record-full.c (record_full_check_insn_num): Remove
2411 'set_terminal' parameter. Don't call target_terminal_ours /
2412 target_terminal_inferior around query.
2413 (record_full_message, record_full_registers_change)
2414 (record_full_xfer_partial): Adjust.
2415 * remote.c (interrupt_query): Don't call target_terminal_ours /
2416 target_terminal_inferior around query.
2417 * utils.c (defaulted_query): Install cleanup to restore target
2418 terminal. Put target_terminal_ours_for_output in effect while
2419 defaulted producing, and target_terminal_ours in in effect while
2421 (prompt_for_continue): Install cleanup to restore target terminal.
2422 Put target_terminal_ours in in effect while handling input.
2424 2016-04-12 Pedro Alves <palves@redhat.com>
2426 * utils.c (defaulted_query, prompt_for_continue): Free temporary
2427 strings with cleanups, instead of xfree.
2429 2016-04-12 Pedro Alves <palves@redhat.com>
2431 * utils.c (vwarning, internal_vproblem): Use
2432 make_cleanup_restore_target_terminal and
2433 target_terminal_ours_for_output.
2435 2016-04-12 Pedro Alves <palves@redhat.com>
2437 * infcmd.c (post_create_inferior, prepare_one_step): Use
2438 target_terminal_ours_for_output instead of target_terminal_ours.
2440 2016-04-12 Pedro Alves <palves@redhat.com>
2442 * exceptions.c (print_flush): Use target_terminal_ours_for_output
2443 instead of target_terminal_ours, and restore target terminal with
2446 2016-04-12 Pedro Alves <palves@redhat.com>
2448 * cp-support.c (gdb_demangle): Use target_terminal_ours_for_output
2449 instead of target_terminal_ours, and restore target terminal with
2452 2016-04-12 Pedro Alves <palves@redhat.com>
2454 * ada-lang.c (type_as_string, type_as_string_and_cleanup): New
2456 (ada_lookup_struct_elt_type): Use type_as_string_and_cleanup.
2458 2016-04-12 Pedro Alves <palves@redhat.com>
2460 * ser-base.c (fd_event): Retry read_prim on EINTR.
2461 (do_ser_base_readchar): Retry read_prim on EINTR.
2462 (ser_base_write): Retry write_prim on EINTR.
2463 * ser-unix.c (ser_unix_read_prim): Don't retry on EINTR here.
2464 (ser_unix_write_prim): Remove comment.
2466 2016-04-12 Pedro Alves <palves@redhat.com>
2468 * remote.c (remote_pass_ctrlc): New function.
2469 (init_remote_ops): Install it.
2470 * target.c (target_terminal_inferior): Pass pending Ctrl-C to the
2472 (target_pass_ctrlc, default_target_pass_ctrlc): New functions.
2473 * target.h (struct target_ops) <to_pass_ctrlc>: New method.
2474 (target_pass_ctrlc, default_target_pass_ctrlc): New declarations.
2475 * target-delegates.c: Regenerate.
2477 2016-04-12 Pedro Alves <palves@redhat.com>
2479 * infcmd.c (interrupt_target_1): Call target_stop is in non-stop
2481 * linux-nat.c (linux_nat_interrupt): Delete.
2482 (linux_nat_add_target): Don't install linux_nat_interrupt.
2483 * remote.c (remote_interrupt_ns): Change return type to void.
2484 Throw error if interrupting the target is not supported.
2485 (remote_interrupt): Don't call the remote_stop_ns/remote_stop_as.
2487 2016-04-12 Pedro Alves <palves@redhat.com>
2489 * defs.h (clear_quit_flag): Remove declaration.
2490 * extension-priv.h (struct extension_language_ops)
2491 <clear_quit_flag>: Remove field and update comments.
2492 * extension.c (clear_quit_flag): Delete.
2493 * guile/guile.c (guile_extension_ops): Adjust.
2494 * python/python.c (python_extension_ops): Adjust.
2495 (gdbpy_clear_quit_flag): Delete.
2497 2016-04-12 Pedro Alves <palves@redhat.com>
2499 * main.c (captured_main): Don't clear the quit flag.
2501 2016-04-12 Pedro Alves <palves@redhat.com>
2503 * exceptions.c (prepare_to_throw_exception): Don't clear the quit
2506 2016-04-12 Pedro Alves <palves@redhat.com>
2508 * event-top.c (command_handler): Don't call clear_quit_flag.
2510 2016-04-12 Pedro Alves <palves@redhat.com>
2512 * remote-sim.c (gdb_os_poll_quit): Don't call clear_quit_flag.
2513 * remote.c (remote_wait_as): Don't call clear_quit_flag.
2515 2016-04-12 Pedro Alves <palves@redhat.com>
2517 * python/python.c: Include "ser-event.h".
2518 (gdbpy_event_fds): Delete.
2519 (gdbpy_serial_event): New.
2520 (gdbpy_run_events): Change prototype. Use serial_event_clear
2521 instead of serial_readchar.
2522 (gdbpy_post_event): Use serial_event_set instead of serial_write.
2523 (gdbpy_initialize_events): Use make_serial_event instead of
2526 2016-04-12 Pedro Alves <palves@redhat.com>
2528 * defs.h: Extend QUIT-related comments to mention
2529 interruptible_select.
2530 (quit_serial_event_set, quit_serial_event_clear): Declare.
2531 * event-top.c: Include "ser-event.h" and "gdb_select.h".
2532 (quit_serial_event): New global.
2533 (async_init_signals): Make quit_serial_event.
2534 (quit_serial_event_set, quit_serial_event_clear)
2535 (quit_serial_event_fd, interruptible_select): New functions.
2536 * extension.c (set_quit_flag): Set the quit serial event.
2537 (check_quit_flag): Clear the quit serial event.
2538 * gdb_select.h (interruptible_select): New declaration.
2539 * guile/scm-ports.c (ioscm_input_waiting): Use
2540 interruptible_select instead of gdb_select.
2541 * top.c (gdb_readline_no_editing): Likewise.
2542 * ui-file.c (stdio_file_read): Likewise.
2544 2016-04-12 Pedro Alves <palves@redhat.com>
2546 * event-loop.c: Include "ser-event.h".
2547 (async_signal_handlers_serial_event): New global.
2548 (async_signals_handler, initialize_async_signal_handlers): New
2550 (mark_async_signal_handler): Set
2551 async_signal_handlers_serial_event.
2552 (invoke_async_signal_handlers): Clear
2553 async_signal_handlers_serial_event.
2554 * event-top.c (async_init_signals): Call
2555 initialize_async_signal_handlers.
2557 2016-04-12 Pedro Alves <palves@redhat.com>
2559 * Makefile.in (SFILES): Add ser-event.c.
2560 (HFILES_NO_SRCDIR): Add ser-event.h.
2561 (COMMON_OBS): Add ser-event.o.
2562 * ser-event.c, ser-event.h: New files.
2563 * serial.c (new_serial): New function, factored out from
2564 (serial_fdopen_ops): ... this.
2565 (serial_open_ops_1): New function, factored out from
2566 (serial_open): ... this.
2567 (serial_open_ops): New function.
2568 * serial.h (struct serial): Forware declare.
2569 (serial_open_ops): New declaration.
2571 2016-04-12 Pedro Alves <palves@redhat.com>
2573 * serial.c (serial_open, serial_fdopen_ops, do_serial_close):
2574 Remove references to name.
2575 * serial.h (struct serial) <name>: Delete.
2577 2016-04-12 Pedro Alves <palves@redhat.com>
2579 * remote-fileio.c (sigint_fileio_token, remote_fio_no_longjmp):
2581 (async_remote_fileio_interrupt): Delete.
2582 (remote_fileio_ctrl_c_signal_handler): Don't call the async signal
2583 handler. Instead just always set the ctrl_c flag.
2584 (remote_fileio_reply): Clear remote_fio_ctrl_c_flag before
2585 re-enabling the SIGINT handler.
2586 (remote_fileio_func_open, remote_fileio_func_close)
2587 (remote_fileio_func_read, remote_fileio_func_write)
2588 (remote_fileio_func_lseek, remote_fileio_func_rename)
2589 (remote_fileio_func_unlink, remote_fileio_func_stat)
2590 (remote_fileio_func_fstat, remote_fileio_func_gettimeofday)
2591 (remote_fileio_func_isatty, remote_fileio_func_system)
2592 (remote_fileio_request): Remove references to
2593 remote_fio_no_longjmp.
2594 (initialize_remote_fileio): Don't create an async signal handler.
2596 2016-04-12 Pedro Alves <palves@redhat.com>
2598 * event-top.c (stdin_event_handler): Call QUIT;
2599 (prompt_for_continue): Don't run with immediate_quit set.
2601 2016-04-12 Pedro Alves <palves@redhat.com>
2603 * tui/tui-io.c (tui_redisplay_readline): Check
2604 gdb_in_secondary_prompt_p instead of immediate_quit.
2605 * tui/tui.c: Include top.h.
2606 (tui_rl_startup_hook): Check gdb_in_secondary_prompt_p instead of
2609 2016-04-12 Pedro Alves <palves@redhat.com>
2611 * top.c (read_command_file): Inline command_loop here.
2612 (command_loop): Delete.
2614 2016-04-12 Pedro Alves <palves@redhat.com>
2616 * top.c: Include "gdb_select.h".
2617 (gdb_readline_no_editing): Wait for input with gdb_select instead
2618 of blocking in fgetc.
2619 (command_line_input): Don't set immediate_quit.
2621 2016-04-08 Martin Galvan <martin.galvan@tallertechnologies.com>
2623 * value.c (value_next): Make pass-by-reference parameters const-correct.
2624 (value_parent): Likewise.
2625 (value_enclosing_type): Likewise.
2626 (value_lazy): Likewise.
2627 (value_stack): Likewise.
2628 (value_embedded_offset): Likewise.
2629 (value_pointed_to_offset): Likewise.
2630 (value_raw_address): Likewise.
2631 (deprecated_value_modifiable): Likewise.
2632 (value_free_to_mark): Likewise.
2633 (value_release_to_mark): Likewise.
2634 (internalvar_name): Likewise.
2635 (readjust_indirect_value_type): Likewise.
2636 (value_initialized): Likewise.
2637 * value.h (value_next): Likewise.
2638 (value_parent): Likewise.
2639 (value_enclosing_type): Likewise.
2640 (value_lazy): Likewise.
2641 (value_stack): Likewise.
2642 (value_embedded_offset): Likewise.
2643 (value_pointed_to_offset): Likewise.
2644 (value_raw_address): Likewise.
2645 (deprecated_value_modifiable): Likewise.
2646 (value_free_to_mark): Likewise.
2647 (value_release_to_mark): Likewise.
2648 (internalvar_name): Likewise.
2649 (readjust_indirect_value_type): Likewise.
2650 (value_initialized): Likewise.
2652 2016-04-07 Yao Qi <yao.qi@linaro.org>
2654 * record-full.c (record_full_insert_breakpoint): Return
2655 early if entry on the address is found in
2656 record_full_breakpoints.
2658 2016-04-07 Yao Qi <yao.qi@linaro.org>
2660 * record-full.c (record_full_insert_breakpoint): Set
2661 bp_tgt->reqstd_address and bp_tgt->placed_size.
2663 2016-04-06 Don Breazeal <donb@codesourcery.com>
2665 * value.c (value_actual_type): Don't try to get rtti type
2666 of the value if it has been optimized out.
2667 (value_optimized_out): If a memory access error occurs,
2668 just check vaue->optimized_out.
2670 2016-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
2672 Revert the previous commit adding unknown_v_replies_ok.
2674 2016-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
2676 * remote.c (struct remote_state): New field unknown_v_replies_ok.
2677 (packet_config_support): Read it.
2678 (remote_start_remote): Set it.
2680 2016-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
2682 * remote.c: Revert check-in by a mistake in the previous commit.
2684 2016-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
2685 Pedro Alves <palves@redhat.com>
2687 * exec.c (exec_file_locate_attach): Print warning for unsupported
2688 target_pid_to_exec_file.
2689 * symfile-mem.c (add_vsyscall_page): Remove the "file" command
2692 2016-04-04 Simon Marchi <simon.marchi@ericsson.com>
2694 * cli/cli-decode.c (help_cmd_list): Fix function doc and remove
2697 2016-04-01 Artemiy Volkov <artemiyv@acm.org>
2700 * eval.c (evaluate_subexp_standard): Allow TYPE_CODE_ENUM to be
2701 the type of BINOP_REPEAT's second operand.
2703 2016-03-31 Yichao Yu <yyc1992@gmail.com>
2706 * jit.c (jit_breakpoint_re_set_internal): Return 0 if we already
2707 got the breakpoint at the right address.
2708 (jit_inferior_created): New function.
2709 (_initialize_jit): Install jit_inferior_created as
2710 inferior_created observer.
2712 2016-03-31 Marcin Kościelnicki <koriakin@0x04.net>
2714 * NEWS: Mention support for tracepoints on powerpc*-linux.
2716 2016-03-31 Catalin Udma <catalin.udma@freescale.com>
2719 * python/python.c (execute_gdb_command): Use console uiout
2720 when executing gdb command.
2721 * utils.c (restore_ui_out_closure): New structure.
2722 (do_restore_ui_out): New function.
2723 (make_cleanup_restore_ui_out): Likewise.
2724 * utils.h (make_cleanup_restore_ui_out): Declare.
2726 2016-03-31 Pedro Alves <palves@redhat.com>
2728 * NEWS: Mention that support for "target m32rsdi", "target mips",
2729 "target pmon", "target ddb", "target rockhopper", and "target lsi"
2731 * Makefile.in (ALL_TARGET_OBS): Remove remote-m32r-sdi.o and
2733 (ALLDEPFILES): Remove remote-m32r-sdi.c and remote-mips.c.
2734 * configure.tgt: Remove all references to remote-m32r-sdi.o and
2736 * mips-tdep.c (deprecated_mips_set_processor_regs_hack): Delete
2738 * mips-tdep.h (deprecated_mips_set_processor_regs_hack): Delete
2740 * remote-m32r-sdi.c, remote-mips.c: Delete files.
2741 * symfile.c (generic_load, generic_load): Remove comments.
2743 2016-03-30 Yao Qi <yao.qi@linaro.org>
2745 * arm-tdep.c (arm_epilogue_frame_this_id): Check 'func' against
2748 2016-03-30 Yao Qi <yao.qi@linaro.org>
2750 * arm-tdep.c: (arm_make_epilogue_frame_cache): New function.
2751 (arm_epilogue_frame_this_id): New function.
2752 (arm_epilogue_frame_prev_register): New function.
2753 (arm_epilogue_frame_sniffer): New function.
2754 (arm_epilogue_frame_unwind): New.
2755 (arm_gdbarch_init): Append unwinder arm_epilogue_frame_unwind.
2757 2016-03-30 Yao Qi <yao.qi@linaro.org>
2759 * arm-tdep.c (arm_stack_frame_destroyed_p): Rename it ...
2760 (arm_stack_frame_destroyed_p_1): ... here. Don't call
2762 (arm_stack_frame_destroyed_p): Call
2763 thumb_stack_frame_destroyed_p and
2764 arm_stack_frame_destroyed_p_1.
2766 2016-03-30 Doug Evans <dje@google.com>
2768 * python/py-utils.c (host_string_to_python_string): New function.
2769 * python/python-internal.h (host_string_to_python_string): Declare it.
2770 * python/py-*.c (*): Update all calls to
2771 PyString_Decode (str, strlen (str), host_charset (), NULL);
2772 to use host_string_to_python_string instead.
2774 2016-03-30 Marcin Kościelnicki <koriakin@0x04.net>
2776 * remote.c (remote_check_symbols): Allocate own buffer for reply.
2778 2016-03-29 Max Filippov <jcmvbkbc@gmail.com>
2780 * xtensa-tdep.c (xtensa_frame_cache): Change op1 type to LONGEST.
2781 Use safe_read_memory_integer instead of read_memory_integer.
2783 2016-03-29 Marcin Kościelnicki <koriakin@0x04.net>
2785 * NEWS: Mention support for tracepoints on s390*-linux.
2787 2016-03-29 Don Breazeal <donb@codesourcery.com>
2789 * gdb/value.c (value_actual_type): Fix formatting issue.
2791 2016-03-23 Yao Qi <yao.qi@linaro.org>
2793 * gdbarch.sh (software_single_step): Remove comments.
2794 * gdbarch.h: Regenerated.
2796 2016-03-21 Yao Qi <yao.qi@linaro.org>
2798 * arm-tdep.c (arm_record_media): New.
2799 (arm_record_ld_st_reg_offset): Call arm_record_media.
2801 2016-03-21 Yao Qi <yao.qi@linaro.org>
2803 * arm-linux-tdep.c (arm_canonicalize_syscall): Canonicalize
2806 2016-03-18 Yao Qi <yao.qi@linaro.org>
2808 * sparc-tdep.c (sparc_software_single_step): Make it static.
2809 * sparc-tdep.h (sparc_software_single_step): Remove declaration.
2811 2016-03-18 Yao Qi <yao.qi@linaro.org>
2813 * spu-tdep.c (spu_software_single_step): Throw error when
2814 target_read_memory fails.
2816 2016-03-17 Jan Kratochvil <jan.kratochvil@redhat.com>
2818 * linux-thread-db.c (check_pid_namespace_match): Extend the message.
2820 2016-03-17 Pedro Alves <palves@redhat.com>
2821 Don Breazeal <donb@codesourcery.com>
2824 * infcmd.c (notice_new_inferior): Use the 'leave_running' argument
2825 instead of checking the 'non_stop' global.
2826 * remote.c (remote_add_thread): New parameter 'executing'. Use it
2827 to set the new thread's executing state.
2828 (remote_notice_new_inferior): Rename parameter 'running' to
2829 'executing'. Always set the thread state to THREAD_RUNNING in
2830 non-stop mode, and to THREAD_STOPPED in all-stop mode. Pass
2831 EXECUTING to remote_add_thread and notice_new_inferior.
2832 (remote_update_thread_list): Update to pass executing state, not
2835 2016-03-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
2837 * syscalls/s390-linux.xml: Add NUMA syscalls and new syscalls up
2839 * syscalls/s390x-linux.xml: Likewise.
2841 2016-03-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
2843 * linux-record.c (record_mem_at_reg): New helper function.
2844 (record_linux_system_call): Exploit new helper function where
2847 2016-03-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
2849 * linux-record.c: Fix whitespace issues; tabify, remove trailing
2852 2016-03-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
2854 * linux-record.c (record_linux_system_call): Add missing return
2855 statements to handling of pipe and pipe2 syscalls.
2857 2016-03-16 Doug Evans <dje@google.com>
2859 * xml-tdesc.c (tdesc_start_enum): Fix c++ build.
2861 2016-03-16 Yao Qi <yao.qi@linaro.org>
2863 * arm-linux-tdep.c (arm_linux_init_abi): Fix
2864 arm_linux_record_tdep.arg1, arm_linux_record_tdep.arg2 and
2865 arm_linux_record_tdep.arg3. Set arm_linux_record_tdep.arg4,
2866 arm_linux_record_tdep.arg5, arm_linux_record_tdep.arg6, and
2867 arm_linux_record_tdep.arg7.
2869 2016-03-15 Keith Seitz <keiths@redhat.com>
2871 PR breakpoints/18303
2872 * cp-namespace.c (cp_lookup_bare_symbol): Change assertion to
2873 look for "::" instead of simply ":".
2874 (cp_search_static_and_baseclasses): Return null_block_symbol for
2877 * cp-support.c (cp_find_first_component_aux): Do not return
2878 a prefix length for ':' unless the next character is also ':'.
2880 2016-03-15 Doug Evans <dje@google.com>
2882 * features/aarch64-core.xml (cpsr_flags): New flags type.
2884 * features/aarch64.c: Regenerate.
2886 2016-03-15 Doug Evans <dje@google.com>
2888 * features/i386/32bit-core.xml (i386_eflags): Remove "end" spec.
2889 * features/i386/32bit-sse.xml (i386_eflags): Ditto.
2890 * features/i386/64bit-core.xml (i386_eflags): Ditto.
2891 * features/i386/64bit-sse.xml (i386_eflags): Ditto.
2892 * features/i386/x32-core.xml (i386_eflags): Ditto.
2894 2016-03-15 Doug Evans <dje@google.com>
2895 Wei-cheng Wang <cole945@gmail.com>
2897 Extend flags to support multibit and enum bitfields.
2898 * NEWS: Document new features.
2899 * c-typeprint.c (c_type_print_varspec_prefix): Handle TYPE_CODE_FLAGS.
2900 (c_type_print_varspec_suffix, c_type_print_base): Ditto.
2901 * gdbtypes.c (arch_flags_type): Don't assume all fields are one bit.
2902 (append_flags_type_field): New function.
2903 (append_flags_type_flag): Call it.
2904 * gdbtypes.h (append_flags_type_field): Declare.
2905 * target-descriptions.c (struct tdesc_type_flag): Delete.
2906 (enum tdesc_type_kind) <TDESC_TYPE_BOOL>: New enum value.
2907 (enum tdesc_type_kind) <TDESC_TYPE_ENUM>: Ditto.
2908 (struct tdesc_type) <u.f>: Delete.
2909 (tdesc_predefined_types): Add "bool".
2910 (tdesc_predefined_type): New function.
2911 (tdesc_gdb_type): Handle TDESC_TYPE_BOOL, TDESC_TYPE_ENUM.
2912 Update TDESC_TYPE_FLAGS support.
2913 (tdesc_free_type): Handle TDESC_TYPE_ENUM. Update TDESC_TYPE_FLAGS.
2914 (tdesc_create_flags): Update.
2915 (tdesc_create_enum): New function.
2916 (tdesc_add_field): Initialize start,end to -1.
2917 (tdesc_add_typed_bitfield): New function.
2918 (tdesc_add_bitfield): Call it.
2919 (tdesc_add_flag): Allow TDESC_TYPE_STRUCT. Update.
2920 (tdesc_add_enum_value): New function.
2921 (maint_print_c_tdesc_cmd): Fold TDESC_TYPE_FLAGS support into
2922 TDESC_TYPE_STRUCT. Handle TDESC_TYPE_ENUM.
2923 * target-descriptions.h (tdesc_create_enum): Declare.
2924 (tdesc_add_typed_bitfield, tdesc_add_enum_value): Declare.
2925 * valprint.c (generic_val_print_enum_1): New function.
2926 (generic_val_print_enum): Call it.
2927 (val_print_type_code_flags): Make static. Handle multibit bitfields
2929 * valprint.h (val_print_type_code_flags): Delete.
2930 * xml-tdesc.c (struct tdesc_parsing_data) <current_type_is_flags>:
2931 Delete. All uses removed.
2932 (tdesc_start_enum): New function.
2933 (tdesc_start_field): Handle multibit and enum bitfields.
2934 (tdesc_start_enum_value): New function.
2935 (enum_value_attributes, enum_children, enum_attributes): New static
2937 (feature_children): Add "enum".
2938 * features/gdb-target.dtd (enum, evalue): New elements.
2940 2016-03-15 Doug Evans <dje@google.com>
2942 * target-descriptions.c (struct tdesc_type) <u.u.size>: Change type
2943 from LONGEST to int.
2944 (struct tdesc_type) <u.f.size>: Ditto.
2945 (tdesc_set_struct_size): Change type of "size" arg from LONGEST
2946 to int. Add assertion size > 0.
2947 (tdesc_create_flags): Ditto.
2948 * target-descriptions.h (tdesc_set_struct_size): Update.
2949 (tdesc_create_flags): Update.
2950 * xml-tdesc.c (MAX_FIELD_SIZE, MAX_FIELD_BITSIZE): New macros.
2951 (MAX_VECTOR_SIZE): New macro.
2952 (tdesc_start_struct): Catch conversion errors from LONGEST to int.
2953 (tdesc_start_flags, tdesc_start_field, tdesc_start_vector): Ditto.
2955 2016-03-15 Doug Evans <dje@google.com>
2957 * target-descriptions.c (maint_print_c_tdesc_cmd): Use "type" for
2958 TYPE_CODE_FLAGS instead of "field_type", for consistency.
2959 * features/i386/amd64-avx-linux.c: Regenerate.
2960 * features/i386/amd64-avx.c: Regenerate.
2961 * features/i386/amd64-avx512-linux.c: Regenerate.
2962 * features/i386/amd64-avx512.c: Regenerate.
2963 * features/i386/amd64-linux.c: Regenerate.
2964 * features/i386/amd64-mpx-linux.c: Regenerate.
2965 * features/i386/amd64-mpx.c: Regenerate.
2966 * features/i386/amd64.c: Regenerate.
2967 * features/i386/i386-avx-linux.c: Regenerate.
2968 * features/i386/i386-avx.c: Regenerate.
2969 * features/i386/i386-avx512-linux.c: Regenerate.
2970 * features/i386/i386-avx512.c: Regenerate.
2971 * features/i386/i386-linux.c: Regenerate.
2972 * features/i386/i386-mmx-linux.c: Regenerate.
2973 * features/i386/i386-mmx.c: Regenerate.
2974 * features/i386/i386-mpx-linux.c: Regenerate.
2975 * features/i386/i386-mpx.c: Regenerate.
2976 * features/i386/i386.c: Regenerate.
2977 * features/i386/x32-avx-linux.c: Regenerate.
2978 * features/i386/x32-avx.c: Regenerate.
2979 * features/i386/x32-avx512-linux.c: Regenerate.
2980 * features/i386/x32-avx512.c: Regenerate.
2981 * features/i386/x32-linux.c: Regenerate.
2982 * features/i386/x32.c: Regenerate.
2984 2016-03-15 Pedro Alves <palves@redhat.com>
2987 * linux-thread-db.c (try_thread_db_load_1): Leave
2988 info->td_ta_thr_iter_p NULL iff debugging a live process and we
2990 (find_new_threads_once): Assert that we have a non-NULL
2991 info->td_ta_thr_iter_p instead of checking whether the target has
2994 2016-03-15 Pedro Alves <palves@redhat.com>
2997 * infrun.c (displaced_step_prepare): Also disable displaced
2998 stepping on NOT_SUPPORTED_ERROR.
2999 * linux-tdep.c (linux_displaced_step_location): If reading auxv
3000 fails, throw NOT_SUPPORTED_ERROR instead of generic error.
3002 2016-03-13 Marcin Kościelnicki <koriakin@0x04.net>
3004 * s390-linux-tdep.c (s390_gen_return_address): New function.
3005 (s390_gdbarch_init): Fill gen_return_address hook.
3007 2016-03-11 Andrew Burgess <andrew.burgess@embecosm.com>
3009 * symmisc.c (maintenance_info_line_tables): New function.
3010 (maintenance_print_one_line_table): New function.
3011 (_initialize_symmisc): Register 'maint info line-table' command.
3012 * NEWS: Mention new command.
3014 2016-03-11 Marcin Kościelnicki <koriakin@0x04.net>
3016 * s390-linux-tdep.c (s390_ax_pseudo_register_collect): New function.
3017 (s390_ax_pseudo_register_push_stack): New function.
3018 (s390_gdbarch_init): Fill ax_pseudo_register_collect and
3019 ax_pseudo_register_push_stack hooks.
3021 2016-03-10 Simon Marchi <simon.marchi@polymtl.ca>
3023 * data-directory/Makefile.in (PYTHON_FILE_LIST): Install
3024 gdb/function/as_string.py.
3025 * python/lib/gdb/function/as_string.py: New file.
3026 * NEWS: Mention the new $_as_string function.
3028 2016-03-09 Jose E. Marchesi <jose.marchesi@oracle.com>
3030 * target.h: Fix doc string of target_can_use_hardware_watchpoint.
3032 2016-03-09 Pedro Alves <palves@redhat.com>
3034 * event-top.c (more_to_come): Delete.
3035 (struct readline_input_state): Delete.
3036 (readline_input_state): Delete.
3037 (get_command_line_buffer): New function.
3038 (command_handler): Update comments. Don't handle NULL commands
3039 here. Do not execute commented lines.
3040 (command_line_append_input_line): New function.
3041 (handle_line_of_input): New function, partly based on
3042 command_line_handler and command_line_input.
3043 (command_line_handler): Rewrite.
3044 * event-top.h (command_handler): New declaration.
3045 (command_loop): Defer command execution to command_handler.
3046 (command_line_input): Update comments. Simplify, using struct
3047 buffer and handle_line_of_input.
3048 * top.h (struct buffer): New forward declaration.
3049 (handle_line_of_input): New declaration.
3051 2016-03-09 Pedro Alves <palves@redhat.com>
3053 * event-top.c (command_line_handler): Use xfree + xstrdup instead
3054 of xrealloc + strcpy.
3055 * main.c (captured_main): Use xstrdup instead of xmalloc plus
3057 * top.c (saved_command_line): Rewrite comment.
3058 (saved_command_line_size): Delete.
3059 (command_line_input): Use xfree + xstrdup instead of xrealloc +
3061 * top.h (saved_command_line_size): Delete declaration.
3063 2016-03-09 Pedro Alves <palves@redhat.com>
3065 * event-top.c: Include buffer.h.
3066 (gdb_readline_no_editing_callback): Use struct buffer instead
3069 2016-03-09 Pedro Alves <palves@redhat.com>
3071 * common/buffer.h (buffer_grow_char): New function.
3072 * top.c: Include buffer.h.
3073 (gdb_readline_no_editing): Rename 'prompt_arg' parameter to
3074 'prompt'. Use struct buffer instead of xrealloc.
3076 2016-03-09 Pedro Alves <palves@redhat.com>
3078 * defs.h (gdb_readline): Delete declaration.
3079 * top.c (gdb_readline): Rename to ...
3080 (gdb_readline_no_editing): ... this, and make static.
3082 2016-03-09 Pedro Alves <palves@redhat.com>
3084 * utils.c (prompt_for_continue): Update comments.
3086 2016-03-09 Pedro Alves <palves@redhat.com>
3088 * event-top.c (async_annotation_suffix): Delete.
3089 (top_level_prompt, command_line_handler): Don't use
3090 'async_annotation_suffix' and simplify.
3091 * event-top.h (async_annotation_suffix): Delete declaration.
3092 (init_main): Remove reference to 'async_annotation_suffix'.
3094 2016-03-09 Pedro Alves <palves@redhat.com>
3096 * event-top.c (gdb_readline2): Rename to ...
3097 (gdb_readline_no_editing_callback): ... this.
3098 (change_line_handler, stdin_event_handler)
3099 (gdb_setup_readline): Adjust.
3100 * event-top.h (gdb_readline2): Rename to ...
3101 (gdb_readline_no_editing_callback): ... this, and move closer to
3102 other readline-related declarations.
3103 * mi/mi-interp.c (mi_interpreter_resume): Adjust.
3105 2016-03-09 Pedro Alves <palves@redhat.com>
3107 * top.c (window_hook): Delete.
3108 (command_loop): Remove references to window_hook.
3110 2016-03-09 Marcin Kościelnicki <koriakin@0x04.net>
3112 * corefile.c (safe_read_memory_unsigned_integer): New function.
3113 * gdbcore.h (safe_read_memory_unsigned_integer): New prototype.
3114 * rs6000-tdep.c (rs6000_frame_cache): Read backchain as unsigned.
3116 2016-03-09 Marcin Kościelnicki <koriakin@0x04.net>
3118 * rs6000-tdep.c: Add "ax.h" and "ax-gdb.h" includes.
3119 (rs6000_gen_return_address): New function.
3120 (rs6000_gdbarch_init): Wire in the above.
3122 2016-03-09 Marcin Kościelnicki <koriakin@0x04.net>
3124 * rs6000-tdep.c (rs6000_ax_pseudo_register_collect): New function.
3125 (rs6000_gdbarch_init): Wire in the above.
3127 2016-03-09 Andreas Arnez <arnez@linux.vnet.ibm.com>
3129 * s390-linux-tdep.c (s390_analyze_prologue): Ignore BRC and BRCL
3130 instructions that do nothing or are conditional traps.
3132 2016-03-09 Andreas Arnez <arnez@linux.vnet.ibm.com>
3134 * s390-linux-tdep.c (s390_prologue_frame_unwind_cache): Store
3135 frame func's PC in info->func before any other failure can occur.
3136 (s390_frame_this_id): Use frame_id_build_unavailable_stack if
3137 info->func has been filled out.
3139 2016-03-09 Pedro Alves <palves@redhat.com>
3141 * osabi.c (gdb_osabi_names): Avoid spaces in osabi names.
3143 2016-03-09 Pedro Alves <palves@redhat.com>
3145 * frv-tdep.c (frv_gdbarch_init): Handle bfd_mach_fr300.
3147 2016-03-09 Pedro Alves <palves@redhat.com>
3149 * cris-tdep.c (cris_gdbarch_init): Return 0 if the info's byte
3150 order is BFD_ENDIAN_BIG or if the cris version is unsupported.
3152 2016-03-09 Pedro Alves <palves@redhat.com>
3154 * doublest.c: Extend comments.
3155 (floatformat_to_doublest, floatformat_from_doublest): Copy the
3156 floatformat's total size, not the host type's size.
3158 2016-03-09 Pedro Alves <palves@redhat.com>
3160 * doublest.c (floatformat_totalsize_bytes): New function.
3161 (floatformat_from_type): Assert that the type's length is at least
3162 as long as the floatformat's totalsize.
3163 * doublest.h (floatformat_totalsize_bytes): New declaration.
3164 * gdbtypes.c (arch_float_type): Assert that the type's length is
3165 at least as long as the floatformat's totalsize.
3167 2016-03-09 Pedro Alves <palves@redhat.com>
3169 * hppa-linux-tdep.c (hppa_linux_init_abi): Set the long double
3170 format to floatformats_ieee_double.
3172 2016-03-07 Pedro Alves <palves@redhat.com>
3174 * mips-tdep.c (mips_gdbarch_init): Check whether info.abfd is NULL
3175 before calling bfd_get_flavour.
3177 2016-03-05 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
3179 * avr-tdep.c (AVR_LAST_ARG_REGNUM): Define.
3180 (avr_push_dummy_call): Correct last needed argument register.
3181 Write MSB of argument into register and subsequent bytes into
3182 other registers in decreasing order.
3184 2016-03-04 Yao Qi <yao.qi@linaro.org>
3186 * arm-tdep.c (arm_record_vdata_transfer_insn): Simplify the
3187 condition check. Record the right D register number.
3189 2016-03-04 Yao Qi <yao.qi@linaro.org>
3191 * arm-tdep.c (arm_record_extension_space): Remove code
3192 printing "Process record does not support".
3193 (arm_record_data_proc_misc_ld_str): Likewise.
3194 (decode_insn): Call arm_record_extension_space if condition
3195 is 0xf. Call arm_record_unsupported_insn if ret isn't
3196 ARM_RECORD_SUCCESS. Use 'ret' instead of 'insn_id' to hold
3197 the value of thumb2_record_decode_insn_handler.
3199 2016-03-04 Simon Marchi <simon.marchi@ericsson.com>
3201 * features/feature_to_c.sh: Print the help when passing no
3204 2016-03-02 Bernhard Heckel <bernhard.heckel@intel.com>
3206 * MAINTAINERS (Write After Approval): Add Bernhard Heckel.
3208 2016-03-02 Bernhard Heckel <bernhard.heckel@intel.com>
3210 * dwarf2read.c (new_symbol_full): Fix detection of gfortran compilers.
3212 2016-03-01 Andreas Arnez <arnez@linux.vnet.ibm.com>
3214 * s390-linux-tdep.c (s390_backchain_frame_unwind_cache): Avoid
3215 exception when attempting to access the inferior's backchain.
3217 2016-02-29 Yao Qi <yao.qi@linaro.org>
3219 * aarch64-linux-tdep.c (aarch64_canonicalize_syscall): Support
3220 eventfd2, eventfd2, dup3, inotify_init1, fallocate and pipe2.
3221 Return gdb_sys_epoll_create1 instead of gdb_sys_epoll_create
3222 for aarch64_sys_epoll_create1.
3224 2016-02-29 Yao Qi <yao.qi@linaro.org>
3226 * linux-record.h (enum gdb_syscall) <gdb_sys_fallocate>: New.
3227 <gdb_sys_eventfd2, gdb_sys_epoll_create1, gdb_sys_dup3>: New.
3228 <gdb_sys_pipe2, gdb_sys_inotify_init1>: New.
3229 * linux-record.c (record_linux_system_call): Handle them.
3231 2016-02-28 Iain Buclaw <ibuclaw@gdcproject.org>
3233 * d-namespace.c (d_lookup_symbol_imports): Avoid recursive lookups from
3236 2016-02-26 Keith Seitz <keiths@redhat.com>
3238 * rs6000-tdep.c (rs6000_frame_cache): Explicitly cast return result
3239 to avoid invalid conversion from void *.
3241 2016-02-26 Yao Qi <yao.qi@linaro.org>
3243 * arm-tdep.c (arm_record_exreg_ld_st_insn): Set 'single_reg'
3244 per bit 8. Check bit 20 instead of bit 4 for VMOV
3245 instruction. Record D registers for instructions changing
3246 S registers. Change of the order of length and address
3247 in record_buf_mem array.
3249 2016-02-26 Yao Qi <yao.qi@linaro.org>
3251 * arm-tdep.c (thumb_record_ld_st_reg_offset): Fix the register
3254 2016-02-25 Doug Evans <dje@google.com>
3256 * remote-m32r-sdi.c (recv_char_data): Initialize val to avoid
3258 (recv_long_data): Ditto.
3260 2016-02-25 Simon Marchi <simon.marchi@ericsson.com>
3262 * i386-linux-tdep.c (i386_linux_handle_segmentation_fault):
3263 Initialize variables.
3265 2016-02-25 Antoine Tremblay <antoine.tremblay@ericsson.com>
3267 * ax-general.c (ax_reg): Call gdbarch_remote_register_number.
3268 (ax_reg_mask): Likewise.
3270 2016-02-24 Pedro Alves <palves@redhat.com>
3272 * linux-nat.c (save_sigtrap) Delete.
3273 (stop_wait_callback): Call save_stop_reason instead of
3275 (check_stopped_by_breakpoint): Rename to ...
3276 (save_stop_reason): ... this. Bits of save_sigtrap folded here.
3277 Use GDB_ARCH_IS_TRAP_HWBKPT and handle ambiguous
3278 GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT. Factor out
3279 common code between the USE_SIGTRAP_SIGINFO and
3280 !USE_SIGTRAP_SIGINFO blocks.
3281 (linux_nat_filter_event): Call save_stop_reason instead of
3283 * nat/linux-ptrace.h: Check for both SI_KERNEL and TRAP_BRKPT
3285 * nat/linux-ptrace.h: Fix "TRAP_HWBPT" typo in x86 table. Add
3286 comments on MIPS behavior.
3287 (GDB_ARCH_IS_TRAP_HWBKPT): Define for all archs.
3289 2016-02-24 Marcin Kościelnicki <koriakin@0x04.net>
3291 * rs6000-tdep.c (rs6000_frame_cache): Initialize frame and pc to 0
3292 to avoid spurious warnings.
3294 2016-02-24 Gary Benson <gbenson@redhat.com>
3296 * exec.c (exec_file_locate_attach): Do not attempt to
3297 locate main executable locally if not found in sysroot.
3299 2016-02-24 Joel Brobecker <brobecker@adacore.com>
3303 2016-02-24 Wei-cheng Wang <cole945@gmail.com>
3305 * rs6000-tdep.c (rs6000_frame_cache, rs6000_frame_this_id): Handle
3306 unavailable PC/SP to build unavailable frame.
3308 2016-02-23 Doug Evans <dje@google.com>
3310 Extend "skip" command to support -file, -gfile, -function, -rfunction.
3311 * NEWS: Document new features.
3312 * skip.c: #include "fnmatch.h", "gdb_regex.h".
3313 (skiplist_entry) <file>: Renamed from filename.
3314 <function>: Renamed from function_name.
3315 <file_is_glob, function_is_regexp>: New members.
3316 <compiled_function_regexp, compiled_function_regexp_is_valid>:
3318 (make_skip_entry): New function.
3319 (free_skiplist_entry, free_skiplist_entry_cleanup): New functions.
3320 (make_free_skiplist_entry_cleanup): New function.
3321 (skip_file_command): Update.
3322 (skip_function, skip_function_command): Update.
3323 (compile_skip_regexp): New functions.
3324 (skip_command): Add support for new options.
3325 (skip_info): Update.
3326 (skip_file_p, skip_gfile_p): New functions.
3327 (skip_function_p, skip_rfunction_p): New functions.
3328 (function_name_is_marked_for_skip): Update and simplify.
3329 (_initialize_step_skip): Update.
3330 * symtab.c: #include "fnmatch.h".
3331 (compare_glob_filenames_for_search): New function.
3332 * symtab.h (compare_glob_filenames_for_search): Declare.
3333 * utils.c (count_path_elements): New function.
3334 (strip_leading_path_elements): New function.
3335 * utils.h (count_path_elements): Declare.
3336 (strip_leading_path_elements): Declare.
3338 2016-02-23 Simon Marchi <simon.marchi@ericsson.com>
3340 * arm-tdep.c (arm_decode_svc_copro): Remove "to" parameter.
3341 (thumb_process_displaced_insn): Likewise.
3342 (arm_process_displaced_insn): Adjust calls.
3344 2016-02-23 Yao Qi <yao.qi@linaro.org>
3346 * aarch64-linux-tdep.c (enum aarch64_syscall) <aarch64_sys_mknod>:
3348 <aarch64_sys_mkdir, aarch64_sys_unlink, aarch64_sys_symlink>: Remove.
3349 <aarch64_sys_link, aarch64_sys_rename, aarch64_sys_faccess>: Remove.
3350 <aarch64_sys_mknodat, aarch64_sys_mkdirat>: New.
3351 <aarch64_sys_unlinkat, aarch64_sys_symlinkat>: New.
3352 <aarch64_sys_linkat, aarch64_sys_renameat>: New.
3353 <aarch64_sys_faccessat>: New.
3354 <aarch64_sys_open, aarch64_sys_readlink, aarch64_sys_fstatat>: Remove.
3355 <aarch64_sys_openat, aarch64_sys_readlinkat>: New.
3356 <aarch64_sys_newfstatat>: New.
3357 (UNSUPPORTED_SYSCALL_MAP): New macro.
3358 (aarch64_canonicalize_syscall): Add missing syscalls.
3360 2016-02-22 Jan Kratochvil <jan.kratochvil@redhat.com>
3362 * gdb-gdb.py (class TypeFlagsPrinter): Use parentheses for print.
3364 2016-02-22 Yao Qi <yao.qi@linaro.org>
3366 * arm-tdep.c: Fix code format issues.
3368 2016-02-21 Iain Buclaw <ibuclaw@gdcproject.org>
3370 * d-namespace.c (d_lookup_symbol_imports): Remove argument
3371 'search_parents'. All callers updated.
3373 2016-02-18 Marcin Kościelnicki <koriakin@0x04.net>
3375 * s390-linux-tdep.c (s390_guess_tracepoint_registers): New function.
3376 (s390_gdbarch_init): Fill guess_tracepoint_registers hook.
3378 2016-02-18 Walfred Tedeschi <walfred.tedeschi@intel.com>
3380 * NEWS: Add entry for bound violation.
3381 * amd64-linux-tdep.c (amd64_linux_init_abi_common):
3382 Add handler for segmentation fault.
3383 * gdbarch.sh (handle_segmentation_fault): New.
3384 * gdbarch.c: Regenerate.
3385 * gdbarch.h: Regenerate.
3386 * i386-linux-tdep.c (i386_linux_handle_segmentation_fault): New.
3387 (SIG_CODE_BONDARY_FAULT): New define.
3388 (i386_linux_init_abi): Use i386_mpx_bound_violation_handler.
3389 * i386-linux-tdep.h (i386_linux_handle_segmentation_fault) New.
3390 * i386-tdep.c (i386_mpx_enabled): Add as external.
3391 * i386-tdep.c (i386_mpx_enabled): Add as external.
3392 * infrun.c (handle_segmentation_fault): New function.
3393 (print_signal_received_reason): Use handle_segmentation_fault.
3395 2016-02-18 Marcin Kościelnicki <koriakin@0x04.net>
3397 * arch-utils.c (default_guess_tracepoint_registers): New function.
3398 * arch-utils.h (default_guess_tracepoint_registers): New prototype.
3399 * gdbarch.c: Regenerate.
3400 * gdbarch.h: Regenerate.
3401 * gdbarch.sh: Add guess_tracepoint_registers hook.
3402 * tracefile.c (tracefile_fetch_registers): Use the new gdbarch hook.
3404 2016-02-17 Gary Benson <gbenson@redhat.com>
3406 * exec.c (exec_file_locate_attach): Add missing cleanup.
3408 2016-02-16 Don Breazeal <donb@codesourcery.com>
3411 * remote.c (remove_new_fork_children): Check for pending
3412 fork status in thread_info.suspend.
3414 2016-02-16 Yao Qi <yao.qi@linaro.org>
3416 * arm-linux-tdep.c (arm_linux_software_single_step): Assign
3419 2016-02-16 Yao Qi <yao.qi@linaro.org>
3421 * arch/arm-get-next-pcs.h (struct arm_get_next_pcs_ops)
3422 <syscall_next_pc>: Remove argument PC. Callers updated.
3423 * arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc):
3424 Remove argument PC. Get pc from regcache_read_pc.
3425 * arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Remove
3428 2016-02-15 Yao Qi <yao.qi@linaro.org>
3430 * aarch64-tdep.c (aarch64_analyze_prologue): Remove "0x".
3432 2016-02-12 Yao Qi <yao.qi@linaro.org>
3434 * arch/arm-linux.c (arm_linux_get_next_pcs_fixup): Calculate
3435 nextpc according to instruction.
3437 2016-02-12 Yao Qi <yao.qi@linaro.org>
3439 * arch/arm-get-next-pcs.c (arm_get_next_pcs): Call
3440 self->ops->fixup if it isn't NULL.
3441 * arch/arm-get-next-pcs.h: Include gdb_vecs.h.
3442 (struct arm_get_next_pcs_ops) <fixup>: New field.
3443 * arch/arm-linux.c: Include common-regcache.h and
3444 arch/arm-get-next-pcs.h.
3445 (arm_linux_get_next_pcs_fixup): New function.
3446 * arch/arm-linux.h (arm_linux_get_next_pcs_fixup): Declare.
3447 * arm-linux-tdep.c (arm_linux_get_next_pcs_ops): Initialize
3448 it with arm_linux_get_next_pcs_fixup.
3449 (arm_linux_software_single_step): Move code to
3450 arm_linux_get_next_pcs_fixup.
3451 * arm-tdep.c (arm_get_next_pcs_ops): Initialize it.
3453 2016-02-12 Marcin Kościelnicki <koriakin@0x04.net>
3455 * xml-tdesc.c (target_fetch_description_xml) [!HAVE_LIBEXPAT]: Warn
3458 2016-02-12 Markus Metzger <markus.t.metzger@intel.com>
3460 * frame.h (skip_tailcall_frames): Update comment.
3461 * frame.c (skip_artificial_frames, skip_tailcall_frames): Return NULL
3462 if only artificial frames are found. Update comment.
3463 (frame_unwind_caller_id): Handle NULL return.
3464 (frame_unwind_caller_pc, frame_unwind_caller_arch): Assert that
3465 skip_artificial_frames does not return NULL.
3466 (frame_pop): Add an error if only tailcall frames are found.
3467 * infcmd.c (finish_command): Move skip_tailcall_frames call into
3468 forward-execution case. Add an error if only tailcall frames are
3471 2016-02-12 Markus Metzger <markus.t.metzger@intel.com>
3473 * stack.c (frame_info): Check frame_unwind_caller_id.
3475 2016-02-12 Markus Metzger <markus.t.metzger@intel.com>
3477 * frame.h (skip_tailcall_frames): New.
3478 * frame.c (skip_tailcall_frames): New.
3479 (frame_pop): Call skip_tailcall_frames.
3480 * infcmd.c (finish_command): Call skip_tailcall_frames.
3482 2016-02-11 Pedro Alves <palves@redhat.com>
3484 * Makefile.in (check-parallel): New rule.
3486 2016-02-11 Simon Marchi <simon.marchi@ericsson.com>
3488 * arm-tdep.c (arm_skip_prologue): Remove unused variables.
3489 (arm_analyze_prologue): Likewise.
3490 (arm_scan_prologue): Likewise.
3491 (arm_m_exception_prev_register): Likewise.
3492 (arm_copy_block_xfer): Likewise.
3493 (thumb2_copy_block_xfer): Likewise.
3494 (arm_decode_miscellaneous): Likewise.
3495 (arm_decode_ld_st_word_ubyte): Likewise.
3496 (arm_decode_svc_copro): Likewise.
3497 (thumb2_decode_svc_copro): Likewise.
3498 (thumb_copy_16bit_ldr_literal): Likewise.
3499 (thumb_copy_pop_pc_16bit): Likewise.
3500 (decode_thumb_32bit_ld_mem_hints): Likewise.
3501 (arm_show_force_mode): Likewise.
3502 (_initialize_arm_tdep): Likewise.
3503 (arm_record_strx): Likewise.
3504 (arm_record_extension_space): Likewise.
3505 (arm_record_data_proc_misc_ld_str): Likewise.
3506 (arm_record_exreg_ld_st_insn): Likewise.
3507 (arm_record_vfp_data_proc_insn): Likewise.
3508 (arm_record_coproc_data_proc): Likewise.
3509 (thumb_record_misc): Likewise.
3510 (thumb_record_ldm_stm_swi): Likewise.
3511 (thumb2_record_ld_st_dual_ex_tbb): Likewise.
3512 (thumb2_record_ld_mem_hints): Likewise.
3513 (thumb2_record_lmul_lmla_div): Likewise.
3514 (thumb2_record_asimd_struct_ld_st): Likewise.
3515 (arm_process_record): Likewise.
3517 2016-02-11 Simon Marchi <simon.marchi@ericsson.com>
3519 * arm-tdep.c (arm_displaced_step_copy_insn): Remove.
3520 (ARM displaced stepping support): Remove reference to
3521 arm_displaced_step_copy_insn in comment.
3522 * arm-tdep.h (arm_displaced_step_copy_insn): Remove.
3523 * arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Remove
3524 reference to arm_displaced_step_copy_insn in comment.
3526 2016-02-11 Simon Marchi <simon.marchi@ericsson.com>
3528 * arm-tdep.c (thumb_copy_unmodified_16bit): Change type of insn.
3529 (thumb_copy_b): Likewise.
3530 (arm_decode_b_bl_ldmstm): Likewise.
3531 (thumb_copy_16bit_ldr_literal): Likewise.
3532 (thumb_copy_pop_pc_16bit): Likewise.
3534 2016-02-11 Antoine Tremblay <antoine.tremblay@ericsson.com>
3536 * tracepoint.c (encode_actions_1): Use target_gdbarch () rather
3539 2016-02-10 Marcin Kościelnicki <koriakin@0x04.net>
3541 * tracefile-tfile.c (trace_tdesc): New static variable.
3542 (tfile_open): Clear trace_tdesc, call target_find_description.
3543 (tfile_interp_line): Recognize tdesc lines.
3544 (tfile_close): Clear trace_tdesc.
3545 (tfile_xfer_partial_features): New function.
3546 (tfile_xfer_partial): Call tfile_xfer_partial_features.
3547 (tfile_append_tdesc_line): New function.
3549 2016-02-10 Marcin Kościelnicki <koriakin@0x04.net>
3551 * ctf.c (ctf_write_tdesc): New function.
3552 (ctf_write_ops): Wire in ctf_write_tdesc.
3553 * tracefile-tfile.c (tfile_write_tdesc): New function.
3554 (tfile_write_ops): Wire in tfile_write_tdesc.
3555 * tracefile.c (trace_save): Call write_tdesc method.
3556 * tracefile.h (struct trace_file_write_ops): Add write_tdesc method.
3557 * xml-tdesc.c (target_fetch_description_xml): New function.
3558 * xml-tdesc.h: Add target_fetch_description_xml prototype.
3560 2016-02-10 Simon Marchi <simon.marchi@ericsson.com>
3562 * arm-tdep.c (arm_copy_extra_ld_st): Fix "unpriveleged" typo.
3563 (arm_decode_dp_misc): Likewise.
3565 2016-02-10 Marcin Kościelnicki <koriakin@0x04.net>
3567 * amd64-tdep.c (amd64_ax_pseudo_register_collect): New function.
3568 (amd64_init_abi): Fill ax_pseudo_register_collect hook.
3569 * gdb/i386-tdep.c (i386_pseudo_register_read_into_value): Remove
3571 (i386_pseudo_register_write): Ditto.
3572 (i386_ax_pseudo_register_collect): New function.
3573 (i386_gdbarch_init): Fill ax_pseudo_register_collect hook.
3574 * i386-tdep.h: Add i386_ax_pseudo_register_collect prototype.
3576 2016-02-10 Marcin Kościelnicki <koriakin@0x04.net>
3578 * tracefile-tfile.c (tfile_fetch_registers): Use g packet order
3579 instead of gdb order.
3581 2016-02-10 Marcin Kościelnicki <koriakin@0x04.net>
3583 * tracefile-tfile.c (tfile_fetch_registers): Fix off-by-one in bounds
3586 2016-02-10 Joel Brobecker <brobecker@adacore.com>
3588 * NEWS: Create a new section for the next release branch.
3589 Rename the section of the current branch, now that it has
3592 2016-02-10 Joel Brobecker <brobecker@adacore.com>
3594 GDB 7.11 branch created (9ef9e6a6a0dd8f948708cb67c9afcfd0be40cb0a):
3595 * version.in: Bump version to 7.11.50.DATE-git.
3597 2016-02-09 Keith Seitz <keiths@redhat.com>
3599 PR breakpoints/19546
3600 * breakpoint.c (breakpoint_event_location_empty_p): New function.
3601 (update_breakpoints_after_exec, bkpt_re_set): Use this new function
3602 instead of event_location_empty_p.
3604 2016-02-09 Keith Seitz <keiths@redhat.com>
3606 * mi/mi-cmd-break.c (mi_cmd_break_insert_1): Use
3607 string_to_event_location_basic instead of string_to_event_location.
3609 2016-02-09 Keith Seitz <keiths@redhat.com>
3611 * guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Skip
3612 leading whitespace and use string_to_event_location_basic instead
3613 of new_linespec_location.
3615 2016-02-09 Keith Seitz <keiths@redhat.com>
3618 * python/py-breakpoint.c (bppy_init): Use
3619 string_to_event_location_basic instead of new_linespec_location.
3621 2016-02-09 Keith Seitz <keiths@redhat.com>
3623 * location.c (string_to_explicit_location): Note that "-p" is
3624 reserved for probe locations and return NULL for any input
3625 that starts with that.
3626 (string_to_event_location): Move "legacy" linespec code to ...
3627 (string_to_event_location_basic): ... here.
3628 * location.h (string_to_event_location): Update comment.
3629 (string_to_event_location_basic): New function.
3631 2016-02-09 Simon Marchi <simon.marchi@ericsson.com>
3633 * configure.ac: Use AC_CONFIG_FILES instead of passing arguments
3634 to AC_OUTPUT. Remove "exit 0" at the end.
3635 * configure: Regenerate.
3637 2016-02-09 Pedro Alves <palves@redhat.com>
3639 PR breakpoints/19548
3640 * breakpoint.c (create_overlay_event_breakpoint): Don't update
3641 global location list here.
3642 (create_longjmp_master_breakpoint)
3643 (create_std_terminate_master_breakpoint)
3644 (create_exception_master_breakpoint, create_jit_event_breakpoint)
3645 (update_breakpoint_locations):
3646 (breakpoint_re_set): Update global location list after all
3647 breakpoints are re-set.
3649 2016-02-08 Simon Marchi <simon.marchi@ericsson.com>
3651 * remote.c (remote_register_number_and_offset): Remove unused
3653 (remote_thread_always_alive): Likewise.
3654 (remote_update_thread_list): Likewise.
3655 (process_initial_stop_replies): Likewise.
3656 (remote_start_remote): Likewise.
3657 (remote_check_symbols): Likewise.
3658 (discard_pending_stop_replies): Likewise.
3659 (process_stop_reply): Likewise.
3660 (putpkt_binary): Likewise.
3662 (remote_add_target_side_condition): Likewise.
3663 (remote_insert_breakpoint): Likewise.
3664 (remote_supports_stopped_by_sw_breakpoint): Likewise.
3665 (remote_supports_stopped_by_hw_breakpoint): Likewise.
3666 (remote_xfer_partial): Likewise.
3667 (remote_read_btrace): Likewise.
3668 (remote_async_serial_handler): Likewise.
3669 (remote_thread_events): Likewise.
3670 (_initialize_remote): Likewise.
3672 2016-02-07 Simon Marchi <simon.marchi@polymtl.ca>
3674 * varobj.h (varobj_delete): Remove dellist parameter, update and
3675 move documentation here.
3676 * varobj.c (struct cpstack, cppush, cppop): Remove.
3677 (delete_variable): Remove resultp (first) parameter.
3678 (delete_variable_1): Likewise.
3679 (varobj_delete): Remove dellist parameter and unused code.
3680 (update_dynamic_varobj_children): Adjust varobj_delete call.
3681 (update_type_if_necessary): Likewise.
3682 (varobj_set_visualizer): Likewise.
3683 (varobj_update): Likewise.
3684 (value_of_root): Likewise.
3685 (varobj_invalidate_iter): Likewise.
3686 * mi/mi-cmd-var.c (mi_cmd_var_delete): Likewise.
3688 2016-02-04 Yao Qi <yao.qi@linaro.org>
3690 * remote.c (remote_wait_as): Set rs->waiting_for_stop_reply to
3691 0 before handling 'F' and set it back afterwards.
3693 2016-02-02 Simon Marchi <simon.marchi@ericsson.com>
3695 * ui-out.c (MAX_UI_OUT_LEVELS): Remove.
3697 2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com>
3699 * amd64-linux-siginfo.c (nat_siginfo_t, nat_sigval_t, nat_timeval):
3701 (compat_siginfo): New bound fields added.
3702 (compat_x32_siginfo): New field added.
3703 (cpt_si_addr_lsb): New define.
3704 (compat_siginfo_from_siginfo): Use nat_siginfo.
3705 (siginfo_from_compat_siginfo): Use nat_siginfo.
3706 (compat_x32_siginfo_from_siginfo): Likewise.
3707 (siginfo_from_compat_x32_siginfo): Likewise.
3709 2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com>
3711 * linux-tdep.c (linux_get_siginfo_type): Add the _addr_bnd
3712 structure to the siginfo if extra_fields contains
3713 LINUX_SIGINFO_FIELD_ADDR_BND.
3715 2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com>
3717 * linux-tdep.h (linux_get_siginfo_type_with_fields): Make extern.
3718 * linux-tdep.c (linux_get_siginfo_type_with_fields): Make extern.
3719 * i386-linux-tdep.h (x86_linux_get_siginfo_type): New
3721 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Add
3722 x86_linux_get_siginfo_type for the amd64 abi.
3723 * i386-linux-tdep.c (x86_linux_get_siginfo_type): New
3725 (i386_linux_init_abi): Add new function at the i386 ABI
3728 2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com>
3730 * linux-tdep.h (linux_siginfo_extra_field_values): New enum values.
3731 (linux_siginfo_extra_fields): New enum type.
3732 * linux-tdep.c (linux_get_siginfo_type_with_fields): New function.
3733 (linux_get_siginfo_type): Use new function.
3735 2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com>
3737 * nat/amd64-linux-siginfo.c: New file.
3738 * nat/amd64-linux-siginfo.h: New file.
3739 * Makefile.in (HFILES_NO_SRCDIR): Add nat/amd64-linux-siginfo.h.
3740 (amd64-linux-siginfo.o): New rule.
3741 * config/i386/linux64.mh (NATDEPFILES): Add amd64-linux-siginfo.o.
3742 * amd64-linux-nat.c (nat/amd64-linux-siginfo.h): New include.
3743 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
3744 (compat_x32_siginfo_from_siginfo, siginfo_from_compat_x32_siginfo)
3745 (compat_timeval, compat_sigval, compat_x32_clock, cpt_si_pid)
3746 (cpt_si_uid, cpt_si_timerid, cpt_si_overrun, cpt_si_status)
3747 (cpt_si_utime, cpt_si_stime, cpt_si_ptr, cpt_si_addr, cpt_si_band)
3748 (cpt_si_fd, si_timerid, si_overrun): Move to nat/amd64-linux-siginfo.c.
3750 2016-02-01 Andrew Burgess <andrew.burgess@embecosm.com>
3752 * value.c (max_value_size): New variable.
3753 (MIN_VALUE_FOR_MAX_VALUE_SIZE): New define.
3754 (set_max_value_size): New function.
3755 (show_max_value_size): New function.
3756 (check_type_length_before_alloc): New function.
3757 (allocate_value_contents): Call check_type_length_before_alloc.
3758 (set_value_enclosing_type): Likewise.
3759 (_initialize_values): Add set/show handler for max-value-size.
3760 * NEWS: Mention new set/show command.
3762 2016-01-31 Simon Marchi <simon.marchi@polymtl.ca>
3764 * varobj.h (struct varobj): Fix typos in comments.
3765 (struct lang_varobj_ops): Likewise.
3766 * varobj.c (VAROBJ_TABLE_SIZE): Likewise.
3767 (varobj_create): Move misplaced comment.
3769 2016-01-29 Simon Marchi <simon.marchi@ericsson.com>
3771 * aarch64-tdep.c (aarch64_record_asimd_load_store): Add braces
3772 to for include additional lines.
3773 * xcoffread.c (scan_xcoff_symtab): Remove unnecessary braces.
3775 2016-01-28 Simon Marchi <simon.marchi@ericsson.com>
3777 * gnulib/import/Makefile.am: Regenerate.
3778 * gnulib/import/Makefile.in: Regenerate.
3779 * gnulib/import/m4/gnulib-cache.m4: Regenerate.
3780 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add rawmemchr.
3782 2016-01-28 Simon Marchi <simon.marchi@ericsson.com>
3784 * remote.c (skip_to_semicolon): Remove.
3785 (remote_parse_stop_reply): Use strchrnul instead of
3787 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add
3789 * gnulib/aclocal.m4: Regenerate.
3790 * gnulib/config.in: Regenerate.
3791 * gnulib/configure: Regenerate.
3792 * gnulib/import/Makefile.am: Regenerate.
3793 * gnulib/import/Makefile.in: Regenerate.
3794 * gnulib/import/m4/gnulib-cache.m4: Regenerate.
3795 * gnulib/import/m4/gnulib-comp.m4: Regenerate.
3796 * gnulib/import/m4/rawmemchr.m4: New file.
3797 * gnulib/import/m4/strchrnul.m4: New file.
3798 * gnulib/import/rawmemchr.c: New file.
3799 * gnulib/import/rawmemchr.valgrind: New file.
3800 * gnulib/import/strchrnul.c: New file.
3801 * gnulib/import/strchrnul.valgrind: New file.
3803 2016-01-28 Yao Qi <yao.qi@linaro.org>
3805 * breakpoint.c (build_target_command_list): Don't call continue
3807 (build_target_condition_list): Likewise.
3809 2016-01-27 Kevin Buettner <kevinb@redhat.com>
3811 * rx-tdep.c (rx_push_dummy_call): Treat scalars larger than 8
3812 bytes as aggregates.
3814 2016-01-27 Joel Brobecker <brobecker@adacore.com>
3816 * MAINTAINERS (Responsible Maintainers): Add Keith Seitz as
3817 Linespec Maintainers.
3819 2016-01-26 Simon Marchi <simon.marchi@ericsson.com>
3821 * common/common-utils.c (skip_spaces): Fix comment.
3822 (skip_to_space_const): Likewise.
3824 2016-01-25 Yao Qi <yao.qi@linaro.org>
3826 * arch/arm-get-next-pcs.c (thumb_deal_with_atomic_sequence_raw):
3827 Remove argument pc. Get pc by regcache_read_pc. Callers updated.
3828 (arm_deal_with_atomic_sequence_raw): Likewise.
3829 (thumb_get_next_pcs_raw): Likewise.
3830 (arm_get_next_pcs_raw): Likewise.
3831 (arm_get_next_pcs): Remove argument pc. Callers updated.
3832 * arch/arm-get-next-pcs.h (arm_get_next_pcs): Update declaration.
3834 2016-01-25 Mark Wielaard <mjw@redhat.com>
3836 * ada-lang.c (ada_evaluate_subexp): Add proper else block.
3837 * c-typeprint.c (c_type_print_base): Fix misleading indentation of
3839 * inflow.c (child_terminal_ours_1): Fix misleading indentation of
3840 statement block by introducing an else.
3841 * linux-record.c (record_linux_sockaddr): Fix misleading indentation
3842 of return statements.
3843 (record_linux_msghdr): Likewise.
3845 2016-01-25 Pedro Alves <palves@redhat.com>
3848 * infrun.c (handle_inferior_event_1) <fork/vfork>: Update
3849 parent/child running states.
3851 2016-01-25 Pedro Alves <palves@redhat.com>
3854 * linux-nat.c (kill_one_lwp): New, factored out from ...
3855 (kill_callback): ... this.
3856 (kill_wait_callback): New, factored out from ...
3857 (kill_wait_one_lwp): ... this.
3858 (kill_unfollowed_fork_children): New function.
3859 (linux_nat_kill): Use it.
3861 2016-01-22 John Baldwin <jhb@FreeBSD.org>
3863 * fbsd-nat.c (fbsd_pid_to_str): Adjust string format.
3865 2016-01-22 Yao Qi <yao.qi@linaro.org>
3867 * arm-linux-nat.c (fetch_fpregs): Call perror_with_name
3869 (store_fpregs, fetch_regs, store_regs): Likewise.
3870 (fetch_wmmx_regs, store_wmmx_regs): Likewise.
3871 (fetch_vfp_regs, store_vfp_regs): Likewise.
3873 2016-01-21 Doug Evans <dje@google.com>
3875 * breakpoint.c (init_breakpoint_sal): Add comment.
3877 2016-01-21 Marcin Kościelnicki <koriakin@0x04.net>
3879 * ax-gdb.c (gen_traced_pop): Use gen_fetch for string collection.
3881 2016-01-21 Andrew Burgess <andrew.burgess@embecosm.com>
3883 * disasm.c (maybe_add_dis_line_entry): Rename to...
3884 (add_dis_line_entry): ...this, and update header comment.
3885 (do_mixed_source_and_assembly): Now use add_dis_line_entry.
3887 2016-01-21 Pedro Alves <palves@redhat.com>
3889 * Makefile.in (COMPILER_CFLAGS): New.
3890 (CXXFLAGS): Get it from configure.
3891 (INTERNAL_CFLAGS_BASE, INTERNAL_LDFLAGS): Use COMPILER_CFLAGS
3893 * build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Set and AC_SUBST
3895 * configure: Regenerate.
3897 2016-01-21 Joel Brobecker <brobecker@adacore.com>
3899 * location.h (new_address_location): Add new parameters
3900 "addr_string" and "addr_string_len".
3901 (get_address_string_location): Add declaration.
3902 * location.c (new_address_location): Add new parameters
3903 "addr_string" and "addr_string_len". If not NULL, store
3904 a copy of the addr_string in the new location as well.
3905 (get_address_string_location): New function.
3906 (string_to_event_location): Update call to new_address_location.
3907 * linespec.c (event_location_to_sals) <ADDRESS_LOCATION>:
3908 Save the event location in the parser's state before
3909 passing it to convert_address_location_to_sals.
3910 * breakpoint.c (create_thread_event_breakpoint): Update call
3911 to new_address_location.
3912 (init_breakpoint_sal): Get the event location's string, if any,
3913 and use it to update call to new_address_location.
3914 * python/py-finishbreakpoint.c (bpfinishpy_init):
3915 Update call to new_address_location.
3916 * spu-tdep.c (spu_catch_start): Likewise.
3918 * config/djgpp/fnchange.lst: Add entries for
3919 gdb/testsuite/gdb.base/break-fun-addr1.c and
3920 gdb/testsuite/gdb.base/break-fun-addr2.c.
3922 2016-01-21 Yao Qi <yao.qi@linaro.org>
3924 * arm-linux-tdep.c (arm_linux_sigreturn_next_pc): Add parameter
3925 is_thumb and set it according to CPSR saved on the stack.
3926 (arm_linux_get_next_pcs_syscall_next_pc): Pass is_thumb to
3927 arm_linux_sigreturn_next_pc.
3929 2016-01-20 Simon Marchi <simon.marchi@polymtl.ca>
3931 * python/lib/gdb/printing.py (FlagEnumerationPrinter.__call__):
3932 Fix enumerators sort key function.
3934 2016-01-20 Joel Brobecker <brobecker@adacore.com>
3936 * printcmd.c (print_scalar_formatted): Move binary operator from
3937 end of line to beginning of next line. Adjust formatting
3940 2016-01-19 John Baldwin <jhb@FreeBSD.org>
3942 * fbsd-nat.c (fbsd_pid_to_exec_file): Use new "buflen" instead of
3945 2016-01-19 John Baldwin <jhb@FreeBSD.org>
3947 * fbsd-tdep.c (find_stop_signal): Remove.
3948 (struct fbsd_collect_regset_section_cb) <lwp>: New field.
3949 <stop_signal>: New field.
3950 <abort_iteration>: New field.
3951 (fbsd_collect_regset_section_cb): Use new fields.
3952 (fbsd_collect_thread_registers): New function.
3953 (struct fbsd_corefile_thread_data): New structure.
3954 (fbsd_corefile_thread): New function.
3955 (fbsd_make_corefile_notes): Use new function to dump notes for each
3956 non-exited thread in a process.
3958 2016-01-19 John Baldwin <jhb@FreeBSD.org>
3960 * configure.ac: Check for support for LWP names on FreeBSD.
3961 * fbsd-nat.c [PT_LWPINFO] New variable debug_fbsd_lwp.
3962 [TDP_RFPPWAIT || HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]
3963 (fbsd_fetch_kinfo_proc): Move function earlier.
3964 [PT_LWPINFO] (fbsd_thread_alive): New function.
3965 [PT_LWPINFO] (fbsd_pid_to_str): New function.
3966 [HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME] (fbsd_thread_name): New function.
3967 [PT_LWP_EVENTS] (fbsd_enable_lwp_events): New function.
3968 [PT_LWPINFO] (fbsd_add_threads): New function.
3969 [PT_LWPINFO] (fbsd_update_thread_list): New function.
3970 [PT_LWPINFO] New variable super_resume.
3971 [PT_LWPINFO] (resume_one_thread_cb): New function.
3972 [PT_LWPINFO] (resume_all_threads_cb): New function.
3973 [PT_LWPINFO] (fbsd_resume): New function.
3974 (fbsd_remember_child): Save full ptid instead of plain pid.
3975 (fbsd_is_child_pending): Return ptid of saved child process.
3976 (fbsd_wait): Include lwp in returned ptid and switch to LWP ptid on
3978 [PT_LWP_EVENTS] Handle LWP events.
3979 [TDP_RFPPWAIT] Include LWP in child ptid.
3980 (fbsd_post_startup_inferior) [PT_LWP_EVENTS]: Enable LWP events.
3981 (fbsd_post_attach) [PT_LWP_EVENTS]: Enable LWP events.
3982 Add threads for existing processes.
3983 (fbsd_nat_add_target) [PT_LWPINFO]: Set "to_thread_alive" to
3984 "fbsd_thread_alive".
3985 Set "to_pid_to_str" to "fbsd_pid_to_str".
3986 [HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]: Set "to_thread_name" to
3988 [PT_LWPINFO]: Set "to_update_thread_list" to "fbsd_update_thread_list".
3989 Set "to_has_thread_control" to "tc_schedlock".
3990 Set "to_resume" to "fbsd_resume".
3991 (_initialize_fbsd_nat): New function.
3992 * configure: Regenerate.
3993 * config.in: Regenerate.
3995 2016-01-19 John Baldwin <jhb@FreeBSD.org>
3997 * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers): Use
3999 (amd64bsd_store_inferior_registers): Use get_ptrace_pid.
4000 (amd64bsd_dr_get): Use get_ptrace_pid.
4001 (amd64bsd_dr_set): Use get_ptrace_pid.
4002 * i386bsd-nat.c (i386bsd_fetch_inferior_registers): Use get_ptrace_pid.
4003 (i386bsd_store_inferior_registers): Use get_ptrace_pid.
4004 (i386bsd_dr_get): Use get_ptrace_pid.
4005 (i386bsd_dr_set): Use get_ptrace_pid.
4006 * inf-ptrace.c (get_ptrace_pid): Export.
4007 * inf-ptrace.h (get_ptrace_pid): Declare.
4008 * ppcfbsd-nat.c (ppcfbsd_fetch_inferior_registers): Use lwp id.
4009 (ppcfbsd_store_inferior_registers): Use lwp id.
4011 2016-01-19 John Baldwin <jhb@FreeBSD.org>
4013 * fbsd_tdep.c (fbsd_core_pid_to_str): New function.
4014 (fbsd_core_thread_name): New function.
4015 (fbsd_init_abi): Add "core_pid_to_str" gdbarch method.
4016 Add "core_thread_name" gdbarch method.
4018 2016-01-19 John Baldwin <jhb@FreeBSD.org>
4020 * corelow.c (core_thread_name): New function.
4021 (init_core_ops): Use "core_thread_name" for the "to_thread_name"
4023 * gdbarch.sh (core_thread_name): New gdbarch callback.
4024 * gdbarch.h: Re-generate.
4025 * gdbarch.c: Re-generate.
4027 2016-01-19 Simon Marchi <simon.marchi@polymtl.ca>
4029 * python/lib/gdb/printing.py (_EnumInstance.to_string): Explicitly
4030 convert gdb.Value to integer type using int().
4032 2016-01-19 John Baldwin <jhb@FreeBSD.org>
4034 * configure.ac: Include <sys/types.h when checking for "r_fs" in
4036 * configure: Regenerate.
4038 2016-01-19 Pedro Alves <palves@redhat.com>
4040 * ax-gdb.c (agent_command_1): Adjust call to decode_line_full.
4041 * break-catch-throw.c (re_set_exception_catchpoint): Pass the
4042 current program space down to linespec decoding and breakpoint
4044 * breakpoint.c (parse_breakpoint_sals): Adjust calls to
4046 (until_break_command): Adjust calls to decode_line_1.
4047 (base_breakpoint_decode_location, bkpt_decode_location): Add
4048 'search_pspace' parameter. Pass it along.
4049 (bkpt_probe_create_sals_from_location): Adjust calls to
4051 (tracepoint_decode_location, tracepoint_probe_decode_location)
4052 (strace_marker_decode_location): Add 'search_pspace' parameter.
4054 (all_locations_are_pending): Rewrite to take a breakpoint and
4055 program space as arguments instead.
4056 (hoist_existing_locations): New function.
4057 (update_breakpoint_locations): Add 'filter_pspace' parameter. Use
4058 hoist_existing_locations instead of always removing all locations,
4059 and adjust to all_locations_are_pending change.
4060 (location_to_sals): Add 'search_pspace' parameter. Pass it along.
4061 Don't disable the breakpoint if there are other locations in
4062 another program space.
4063 (breakpoint_re_set_default): Adjust to pass down the current
4064 program space as filter program space.
4065 (decode_location_default): Add 'search_pspace' parameter and pass
4067 (prepare_re_set_context): Don't switch program space here.
4068 (breakpoint_re_set): Use save_current_space_and_thread instead of
4069 save_current_program_space.
4070 * breakpoint.h (struct breakpoint_ops) <decode_location>: Add
4071 'search_pspace' parameter.
4072 (update_breakpoint_locations): Add 'filter_pspace' parameter.
4073 * cli/cli-cmds.c (edit_command, list_command): Adjust calls to
4075 * elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the current
4076 program space as filter program space.
4077 * linespec.c (struct linespec_state) <search_pspace>: New field.
4078 (create_sals_line_offset, convert_explicit_location_to_sals)
4079 (parse_linespec): Pass the search program space down.
4080 (linespec_state_constructor): Add 'search_pspace' parameter.
4082 (linespec_parser_new): Add 'search_pspace' parameter and pass it
4084 (linespec_lex_to_end): Adjust.
4085 (decode_line_full, decode_line_1): Add 'search_pspace' parameter
4087 (decode_line_with_last_displayed): Adjust.
4088 (collect_symtabs_from_filename, symtabs_from_filename): New
4089 'search_pspace' parameter. Use it.
4090 (find_function_symbols): Pass the search program space down.
4091 * linespec.h (decode_line_1, decode_line_full): Add
4092 'search_pspace' parameter.
4093 * probe.c (parse_probes_in_pspace): New function, factored out
4095 (parse_probes): ... this. Add 'search_pspace' parameter and use
4097 * probe.h (parse_probes): Add pspace' parameter.
4098 * python/python.c (gdbpy_decode_line): Adjust.
4099 * tracepoint.c (scope_info): Adjust.
4101 2016-01-18 Maciej W. Rozycki <macro@imgtec.com>
4103 * mips-tdep.c (mips_insn_size): Remove 48-bit microMIPS
4104 instruction support.
4105 (micromips_next_pc): Likewise.
4106 (micromips_scan_prologue): Likewise.
4107 (micromips_deal_with_atomic_sequence): Likewise.
4108 (micromips_stack_frame_destroyed_p): Likewise.
4109 (mips_breakpoint_from_pc): Likewise.
4111 2016-01-18 Maciej W. Rozycki <macro@imgtec.com>
4113 * mips-tdep.c (micromips_insn_at_pc_has_delay_slot): Pass
4114 unshifted 16-bit microMIPS instruction word to `mips_insn_size'.
4116 2016-01-18 Pedro Alves <palves@redhat.com>
4118 * NEWS: Mention that GDB now displays the ID and name of the
4119 thread that hit a breakpoint or received a signal.
4120 * break-catch-sig.c (signal_catchpoint_print_it): Use
4121 maybe_print_thread_hit_breakpoint.
4122 * break-catch-syscall.c (print_it_catch_syscall): Likewise.
4123 * break-catch-throw.c (print_it_exception_catchpoint): Likewise.
4124 * breakpoint.c (maybe_print_thread_hit_breakpoint): New function.
4125 (print_it_catch_fork, print_it_catch_vfork, print_it_catch_solib)
4126 (print_it_catch_exec, print_it_ranged_breakpoint)
4127 (print_it_watchpoint, print_it_masked_watchpoint, bkpt_print_it):
4128 Use maybe_print_thread_hit_breakpoint.
4129 * breakpoint.h (maybe_print_thread_hit_breakpoint): Declare.
4130 * gdbthread.h (show_thread_that_caused_stop): Declare.
4131 * infrun.c (print_signal_received_reason): Print which thread
4133 * thread.c (show_thread_that_caused_stop): New function.
4135 2016-01-18 Gary Benson <gbenson@redhat.com>
4137 * nat/linux-namespaces.c (do_fork): New function.
4138 (linux_mntns_get_helper): Use the above.
4140 2016-01-17 Jonas Hahnfeld <Hahnfeld@itc.rwth-aachen.de> (tiny change)
4142 Pushed by Joel Brobecker <brobecker@adacore.com>.
4144 * dwarf2read.c (read_partial_die): Do not call set_objfile_main_name
4145 if the function has no name.
4147 2016-01-15 Sandra Loosemore <sandra@codesourcery.com>
4149 * charset.c [PHONY_ICONV] (GDB_DEFAULT_HOST_CHARSET):
4150 Conditionalize for Windows host.
4151 (GDB_DEFAULT_TARGET_CHARSET): Match GDB_DEFAULT_HOST_CHARSET.
4152 (GDB_DEFAULT_TARGET_WIDE_CHARSET): Use UTF-32.
4153 (phony_iconv_open): Handle both UTF-32 endiannesses.
4154 (phony_iconv): Likewise. Check for output overflow and clean up
4155 out-of-input cases. Correct adjustment to input buffer pointer.
4156 (set_be_le_names) [PHONY_ICONV]: Use hard-wired names to match
4159 2016-01-15 Pedro Alves <palves@redhat.com>
4161 * NEWS: Mention star wildcard ranges.
4162 * cli/cli-utils.c (get_number_or_range): Check state->in_range first.
4163 (number_range_setup_range): New function.
4164 * cli/cli-utils.h (number_range_setup_range): New declaration.
4165 * thread.c (thread_apply_command): Support star TID ranges.
4166 * tid-parse.c (tid_range_parser_finished)
4167 (tid_range_parser_string, tid_range_parser_skip)
4168 (get_tid_or_range, get_tid_or_range): Handle
4169 TID_RANGE_STATE_STAR_RANGE.
4170 (tid_range_parser_star_range): New function.
4171 * tid-parse.h (enum tid_range_state) <TID_RANGE_STATE_STAR_RANGE>:
4173 (tid_range_parser_star_range): New declaration.
4175 2016-01-15 Pedro Alves <palves@redhat.com>
4177 * thread.c (thread_apply_command): Use the tid range parser to
4178 advance past the thread ID list.
4179 * tid-parse.c (get_positive_number_trailer): New function.
4180 (parse_thread_id): Use it.
4181 (get_tid_or_range): Use it. Return 0 instead of throwing invalid
4183 (get_tid_or_range): Detect negative values. Return 0 instead of
4184 throwing invalid thread ID error.
4186 2016-01-14 Yao Qi <yao.qi@linaro.org>
4188 * arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc):
4190 (arm_linux_get_next_pcs_ops): Install
4191 arm_linux_get_next_pcs_syscall_next_pc.
4192 (arm_linux_syscall_next_pc): Change to ...
4193 (arm_linux_get_next_pcs_syscall_next_pc): ... it.
4194 (arm_linux_init_abi): Don't set tdep->syscall_next_pc.
4195 * arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Declare.
4196 (arm_get_next_pcs_syscall_next_pc): Make it static. Don't
4197 call tdep->syscall_next_pc.
4198 * arm-tdep.h (struct gdbarch_tdep) <syscall_next_pc>: Remove.
4199 (arm_get_next_pcs_syscall_next_pc): Remove.
4201 2016-01-14 Yao Qi <yao.qi@linaro.org>
4203 * remote.c (remote_set_syscall_catchpoint): Cast to char *.
4204 * thread.c (do_captured_thread_select): Cast to const char *.
4206 2016-01-14 Yao Qi <yao.qi@linaro.org>
4208 * arch/arm-get-next-pcs.c (arm_get_next_pcs_ctor): Change
4209 argument arm_thumb2_breakpoint to has_thumb2_breakpoint.
4210 (thumb_get_next_pcs_raw): Check has_thumb2_breakpoint
4212 * arch/arm-get-next-pcs.h (struct arm_get_next_pcs)
4213 <arm_thumb2_breakpoint>: Remove.
4214 <has_thumb2_breakpoint>: New field.
4215 (arm_get_next_pcs_ctor): Update declaration.
4216 * arm-linux-tdep.c (arm_linux_software_single_step): Pass
4217 1 to arm_get_next_pcs_ctor.
4218 * arm-tdep.c (arm_software_single_step): Pass 0 to
4219 arm_get_next_pcs_ctor.
4221 2016-01-13 Ulrich Weigand <uweigand@de.ibm.com>
4223 * MAINTAINERS: Add Andreas Arnez as s390 target maintainer.
4225 2016-01-13 Yao Qi <yao.qi@linaro.org>
4227 * arch/arm-get-next-pcs.c (arm_get_next_pcs_raw): Use
4228 byte_order_for_code to read instruction.
4230 2016-01-13 Pedro Alves <palves@redhat.com>
4232 * NEWS: Mention $_gthread.
4233 * gdbthread.h (struct thread_info) <global_num>: Mention
4235 * thread.c (thread_num_make_value_helper): New function.
4236 (thread_id_make_value): Delete.
4237 (thread_id_per_inf_num_make_value, global_thread_id_make_value):
4239 (thread_funcs): Adjust.
4240 (gthread_funcs): New.
4241 (_initialize_thread): Register $_gthread variable.
4243 2016-01-13 Pedro Alves <palves@redhat.com>
4245 * NEWS: Mention "info threads -gid".
4246 * gdbthread.h (struct thread_info) <global_num>: Mention "info
4248 * thread.c (info_threads_command): Handle "-gid".
4249 (_initialize_thread): Adjust "info threads" help string to mention
4252 2016-01-13 Pedro Alves <palves@redhat.com>
4254 * NEWS: Mention InferiorThread.global_num.
4255 * python/py-infthread.c (thpy_get_global_num): New function.
4256 (thread_object_getset): Register "global_num".
4258 2016-01-13 Pedro Alves <palves@redhat.com>
4260 * NEWS: Mention that thread IDs are now per inferior and global
4262 * Makefile.in (SFILES): Add tid-parse.c.
4263 (COMMON_OBS): Add tid-parse.o.
4264 (HFILES_NO_SRCDIR): Add tid-parse.h.
4265 * ada-tasks.c: Adjust to use ptid_to_global_thread_id.
4266 * breakpoint.c (insert_breakpoint_locations)
4267 (remove_threaded_breakpoints, bpstat_check_breakpoint_conditions)
4268 (print_one_breakpoint_location, set_longjmp_breakpoint)
4269 (check_longjmp_breakpoint_for_call_dummy)
4270 (set_momentary_breakpoint): Adjust to use global IDs.
4271 (find_condition_and_thread, watch_command_1): Use parse_thread_id.
4272 (until_break_command, longjmp_bkpt_dtor)
4273 (breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust
4275 * dummy-frame.c (pop_dummy_frame_bpt): Adjust to use
4276 ptid_to_global_thread_id.
4277 * elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
4278 * gdbthread.h (struct thread_info): Rename field 'num' to
4279 'global_num. Add new fields 'per_inf_num' and 'inf'.
4280 (thread_id_to_pid): Rename thread_id_to_pid to
4281 global_thread_id_to_ptid.
4282 (pid_to_thread_id): Rename to ...
4283 (ptid_to_global_thread_id): ... this.
4284 (valid_thread_id): Rename to ...
4285 (valid_global_thread_id): ... this.
4286 (find_thread_id): Rename to ...
4287 (find_thread_global_id): ... this.
4288 (ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare.
4289 (print_thread_info): Add comment.
4290 * tid-parse.h: New file.
4291 * tid-parse.c: New file.
4292 * infcmd.c (step_command_fsm_prepare)
4293 (step_command_fsm_should_stop): Adjust to use the global thread
4295 (until_next_command, until_next_command)
4296 (finish_command_fsm_should_stop): Adjust to use the global thread
4298 (attach_post_wait): Adjust to check the inferior number too.
4299 * inferior.h (struct inferior) <highest_thread_num>: New field.
4300 * infrun.c (handle_signal_stop)
4301 (insert_exception_resume_breakpoint)
4302 (insert_exception_resume_from_probe): Adjust to use the global
4304 * record-btrace.c (record_btrace_open): Use global thread IDs.
4305 * remote.c (process_initial_stop_replies): Also consider the
4307 * target.c (target_pre_inferior): Clear the inferior's highest
4309 * thread.c (clear_thread_inferior_resources): Adjust to use the
4311 (new_thread): New inferior parameter. Adjust to use it. Set both
4312 the thread's global ID and the thread's per-inferior ID.
4313 (add_thread_silent): Adjust.
4314 (find_thread_global_id): New.
4315 (find_thread_id): Make static. Adjust to rename.
4316 (valid_thread_id): Rename to ...
4317 (valid_global_thread_id): ... this.
4318 (pid_to_thread_id): Rename to ...
4319 (ptid_to_global_thread_id): ... this.
4320 (thread_id_to_pid): Rename to ...
4321 (global_thread_id_to_ptid): ... this. Adjust.
4322 (first_thread_of_process): Adjust.
4323 (do_captured_list_thread_ids): Adjust to use global thread IDs.
4324 (should_print_thread): New function.
4325 (print_thread_info): Rename to ...
4326 (print_thread_info_1): ... this, and add new show_global_ids
4327 parameter. Handle it. Iterate over inferiors.
4328 (print_thread_info): Reimplement as wrapper around
4329 print_thread_info_1.
4330 (show_inferior_qualified_tids): New function.
4331 (print_thread_id): Use it.
4332 (tp_array_compar): Compare inferior numbers too.
4333 (thread_apply_command): Use tid_range_parser.
4334 (do_captured_thread_select): Use parse_thread_id.
4335 (thread_id_make_value): Adjust.
4336 (_initialize_thread): Adjust "info threads" help string.
4337 * varobj.c (struct varobj_root): Update comment.
4338 (varobj_create): Adjust to use global thread IDs.
4339 (value_of_root_1): Adjust to use global_thread_id_to_ptid.
4340 * windows-tdep.c (display_tib): No longer accept an argument.
4341 * cli/cli-utils.c (get_number_trailer): Make extern.
4342 * cli/cli-utils.h (get_number_trailer): Declare.
4343 (get_number_const): Adjust documentation.
4344 * mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global
4346 * mi/mi-interp.c (mi_new_thread, mi_thread_exit)
4347 (mi_on_normal_stop, mi_output_running_pid, mi_on_resume):
4348 * mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise.
4349 * guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x):
4351 * python/py-breakpoint.c (bppy_set_thread): Likewise.
4352 * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
4353 * python/py-infthread.c (thpy_get_num): Add comment and return the
4354 per-inferior thread ID.
4355 (thread_object_getset): Update comment of "num".
4357 2016-01-13 Pedro Alves <palves@redhat.com>
4359 * breakpoint.c (remove_threaded_breakpoints)
4360 (print_one_breakpoint_location): Use print_thread_id.
4361 * btrace.c (btrace_enable, btrace_disable, btrace_teardown)
4362 (btrace_fetch, btrace_clear): Use print_thread_id.
4363 * common/print-utils.c (CELLSIZE): Delete.
4364 (get_cell): Rename to ...
4365 (get_print_cell): ... this and made extern. Adjust call callers.
4366 Adjust to use PRINT_CELL_SIZE.
4367 * common/print-utils.h (get_print_cell): Declare.
4368 (PRINT_CELL_SIZE): New.
4369 * gdbthread.h (print_thread_id): Declare.
4370 * infcmd.c (signal_command): Use print_thread_id.
4371 * inferior.c (print_inferior): Use print_thread_id.
4372 * infrun.c (handle_signal_stop)
4373 (insert_exception_resume_breakpoint)
4374 (insert_exception_resume_from_probe)
4375 (print_signal_received_reason): Use print_thread_id.
4376 * record-btrace.c (record_btrace_info)
4377 (record_btrace_resume_thread, record_btrace_cancel_resume)
4378 (record_btrace_step_thread, record_btrace_wait): Use
4380 * thread.c (thread_apply_all_command): Use print_thread_id.
4381 (print_thread_id): New function.
4382 (thread_apply_command): Use print_thread_id.
4383 (thread_command, thread_find_command, do_captured_thread_select):
4384 Use print_thread_id.
4386 2016-01-13 Pedro Alves <palves@redhat.com>
4388 * NEWS: Mention InferiorThread.inferior.
4389 * python/py-infthread.c (thpy_get_inferior): New.
4390 (thread_object_getset): Register "inferior".
4392 2016-01-13 Pedro Alves <palves@redhat.com>
4394 * NEWS: Mention $_inferior.
4395 * inferior.c (inferior_id_make_value): New.
4396 (inferior_funcs): New.
4397 (_initialize_inferior): Create $_inferior variable.
4399 2016-01-13 Pedro Alves <palves@redhat.com>
4401 PR breakpoints/19388
4402 * frame.c (get_current_frame): Use validate_registers_access.
4403 * gdbthread.h (validate_registers_access): Declare.
4404 * infrun.c (validate_siginfo_access): Delete.
4405 (siginfo_value_read, siginfo_value_write): Use
4406 validate_registers_access.
4407 * thread.c (validate_registers_access): New function.
4409 2016-01-12 Josh Stone <jistone@redhat.com>
4410 Philippe Waroquiers <philippe.waroquiers@skynet.be>
4412 * NEWS (Changes since GDB 7.10): Mention QCatchSyscalls and the
4413 syscall_entry and syscall_return stop reasons. Mention GDB
4414 support for remote catch syscall.
4415 * remote.c (PACKET_QCatchSyscalls): New enum.
4416 (remote_set_syscall_catchpoint): New function.
4417 (remote_protocol_features): New element for QCatchSyscalls.
4418 (remote_parse_stop_reply): Parse syscall_entry/return stops.
4419 (init_remote_ops): Install remote_set_syscall_catchpoint.
4420 (_initialize_remote): Config QCatchSyscalls.
4421 * linux-nat.h (struct lwp_info) <syscall_state>: Comment typo.
4423 2016-01-12 Yao Qi <yao.qi@linaro.org>
4425 * nat/linux-ptrace.c (linux_child_function): Cast child_stack
4426 to gdb_byte * and pass to linux_fork_to_function.
4428 2016-01-12 Yao Qi <yao.qi@linaro.org>
4430 * nat/linux-ptrace.c (linux_fork_to_function): Change type
4431 of argument 'function'.
4432 (linux_grandchild_function): Change return type to 'int'.
4433 Change child_stack's type to 'void *'.
4434 (linux_child_function): Likewise.
4436 2016-01-12 Pedro Alves <palves@redhat.com>
4438 Remove use of the registered trademark symbol throughout.
4440 2016-01-12 Thomas Schwinge <thomas@codesourcery.com>
4442 * reply_mig_hack.awk: Rewrite one regular expression.
4444 2016-01-11 Mike Frysinger <vapier@gentoo.org>
4446 * acinclude.m4: Include new warning.m4 file.
4447 * configure: Regenerated.
4448 * configure.ac: Move all warning logic ...
4449 * warning.m4: ... here.
4451 2016-01-08 Yao Qi <yao.qi@linaro.org>
4453 * extension.c: Include target.h.
4454 (set_active_ext_lang): Only call install_gdb_sigint_handler,
4455 check_quit_flag, and set_quit_flag if target_terminal_is_ours
4457 (restore_active_ext_lang): Likewise.
4458 * target.c (target_terminal_is_ours): New function.
4459 * target.h (target_terminal_is_ours): Declare.
4461 2016-01-07 Maciej W. Rozycki <macro@imgtec.com>
4463 * mips-tdep.c (mips_breakpoint_from_pc): Rename local `status'
4464 to `err' in the little-endian leg.
4466 2016-01-06 Yao Qi <yao.qi@linaro.org>
4468 * arch/arm-get-next-pcs.c (arm_get_next_pcs): Move it to some
4470 (thumb_get_next_pcs_raw): Make it static.
4471 (arm_get_next_pcs_raw): Likewise.
4472 * arch/arm-get-next-pcs.h (thumb_get_next_pcs_raw): Remove the
4474 (arm_get_next_pcs_raw): Likewise.
4476 2016-01-05 Mike Frysinger <vapier@gentoo.org>
4478 * version.in: Change cvs to git.
4480 2016-01-05 Mike Frysinger <vapier@gentoo.org>
4482 * configure.tgt (score-*-*): Delete gdb_sim assignment.
4484 2016-01-05 Pedro Alves <palves@redhat.com>
4487 * configure.ac: Define WITH_PPC_SIM when linking in the sim and
4488 the target is powerpc*.
4489 * rs6000-tdep.c (init_sim_regno_table): Check WITH_PPC_SIM instead
4491 * configure: Regenerate.
4492 * config.in: Regenerate.
4494 2016-01-04 Markus Metzger <markus.t.metzger@intel.com>
4496 * btrace.c (btrace_pt_readmem_callback): Do not return in TRY/CATCH.
4498 2016-01-02 Mike Frysinger <vapier@gentoo.org>
4500 * configure.tgt (powerpc*-*-*): Delete test call and
4501 always assign gdb_sim.
4503 2016-01-01 Joel Brobecker <brobecker@adacore.com>
4505 Update year range in copyright notice of all files.
4507 2016-01-01 Joel Brobecker <brobecker@adacore.com>
4509 * top.c (print_gdb_version): Change copyright year in version
4512 2016-01-01 Joel Brobecker <brobecker@adacore.com>
4514 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2015.
4516 For older changes see ChangeLog-2015.
4522 version-control: never
projects / external / binutils.git / blob