1 2015-08-08 Ulrich Weigand <uweigand@de.ibm.com>
3 * nat/linux-ptrace.h (GDB_ARCH_TRAP_BRKPT): Replace by ...
4 (GDB_ARCH_IS_TRAP_BRKPT): ... this. Add __powerpc__ case.
5 * linux-nat.c (check_stopped_by_breakpoint): Use
6 GDB_ARCH_IS_TRAP_BRKPT instead of GDB_ARCH_TRAP_BRKPT.
8 2015-08-08 Ulrich Weigand <uweigand@de.ibm.com>
10 * linux-thread-db.c (thread_db_get_thread_local_address): If the
11 thread was not yet discovered, use thread_from_lwp instead of
12 calling thread_db_find_new_threads_1.
14 2015-08-27 Simon Marchi <simon.marchi@ericsson.com>
16 * m88k-tdep.c (m88k_analyze_prologue): Fix inverted allocation
19 2015-08-27 Simon Marchi <simon.marchi@ericsson.com>
21 * NEWS: Document support for non-8-bits addressable memory.
23 2015-08-27 Pedro Alves <palves@redhat.com>
25 * configure.ac: Remove AC_TYPE_SIGNAL call.
26 * configure, config.in: Regenerate.
28 2015-08-27 Pedro Alves <palves@redhat.com>
30 * cp-support.c (gdb_demangle): Use sighandler_t. Remove cast.
31 * extension-priv.h: Include signal.h.
32 (struct signal_handler) <handler>: Change type to sighandler_t.
33 * extension.c (install_gdb_sigint_handler): Use sighandler_t.
34 * inflow.c (sigint_ours, sigquit_ours): Change type to
36 (child_terminal_inferior): Remove casts.
37 (child_terminal_ours_1, new_tty): Use sighandler_t. Remove casts.
38 (osig): Change type to sighandler_t.
39 * nto-procfs.c (ofunc): Change type to sighandler_t.
40 (procfs_wait): Remove casts.
41 * remote-m32r-sdi.c (m32r_wait, m32r_load): Use sighandler_t.
42 * remote-sim.c (gdbsim_wait): Use sighandler_t.
43 * utils.c (wait_to_die_with_timeout): Use sighandler_t.
45 2015-08-27 Pedro Alves <palves@redhat.com>
47 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add signal-h.
48 * gnulib/aclocal.m4: Renegerate.
49 * gnulib/config.in: Renegerate.
50 * gnulib/configure: Renegerate.
51 * gnulib/import/Makefile.am: Update.
52 * gnulib/import/Makefile.in: Regenerate.
53 * gnulib/import/m4/gnulib-cache.m4: Update.
54 * gnulib/import/m4/gnulib-comp.m4: Update.
55 * gnulib/import/m4/signal_h.m4: New file.
56 * gnulib/import/signal.in.h: New file.
58 2015-08-27 Pedro Alves <palves@redhat.com>
60 * remote.c (DEFAULT_MAX_MEMORY_PACKET_SIZE)
61 (MIN_MEMORY_PACKET_SIZE): New.
62 (MAX_REMOTE_PACKET_SIZE, MIN_REMOTE_PACKET_SIZE): Delete.
63 (get_memory_packet_size): Adjust. No longer limit the max packet
65 (set_memory_packet_size): Adjust, and remove dead code.
66 (remote_check_symbols): Use xmalloc and a cleanup instead of
68 (remote_packet_size): No longer cap the packet size.
69 (putpkt_binary): Use xmalloc and a cleanup instead of alloca.
71 2015-08-26 Luis Machado <lgustavo@codesourcery.com>
73 * compile/compile.c (compile_to_object): Mention language in
76 2015-08-26 Patrick Palka <patrick@parcs.ath.cx>
78 * target.c (target_pre_inferior): Unset attach_flag.
80 2015-08-26 Simon Marchi <simon.marchi@ericsson.com>
82 * gdbarch.sh (append_name): Fix type in XRESIZEVEC.
83 * gdbarch.c: Re-generate.
85 2015-08-26 Simon Marchi <simon.marchi@ericsson.com>
87 * aarch64-linux-nat.c (aarch64_add_process): Likewise.
88 * aarch64-tdep.c (aarch64_gdbarch_init): Likewise.
89 * ada-exp.y (write_ambiguous_var): Likewise.
90 * ada-lang.c (resolve_subexp): Likewise.
91 (user_select_syms): Likewise.
92 (assign_aggregate): Likewise.
93 (ada_evaluate_subexp): Likewise.
94 (cache_symbol): Likewise.
95 * addrmap.c (allocate_key): Likewise.
96 (addrmap_create_mutable): Likewise.
97 * aix-thread.c (sync_threadlists): Likewise.
98 * alpha-tdep.c (alpha_push_dummy_call): Likewise.
99 (alpha_gdbarch_init): Likewise.
100 * amd64-windows-tdep.c (amd64_windows_push_arguments): Likewise.
101 * arm-linux-nat.c (arm_linux_add_process): Likewise.
102 * arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Likewise.
103 * arm-tdep.c (push_stack_item): Likewise.
104 (arm_displaced_step_copy_insn): Likewise.
105 (arm_gdbarch_init): Likewise.
106 (_initialize_arm_tdep): Likewise.
107 * avr-tdep.c (push_stack_item): Likewise.
108 * ax-general.c (new_agent_expr): Likewise.
109 * block.c (block_initialize_namespace): Likewise.
110 * breakpoint.c (alloc_counted_command_line): Likewise.
111 (update_dprintf_command_list): Likewise.
112 (parse_breakpoint_sals): Likewise.
113 (decode_static_tracepoint_spec): Likewise.
114 (until_break_command): Likewise.
115 (clear_command): Likewise.
116 (update_global_location_list): Likewise.
117 (get_breakpoint_objfile_data) Likewise.
118 * btrace.c (ftrace_new_function): Likewise.
119 (btrace_set_insn_history): Likewise.
120 (btrace_set_call_history): Likewise.
121 * buildsym.c (add_symbol_to_list): Likewise.
122 (record_pending_block): Likewise.
123 (start_subfile): Likewise.
124 (start_buildsym_compunit): Likewise.
125 (push_subfile): Likewise.
126 (end_symtab_get_static_block): Likewise.
127 (buildsym_init): Likewise.
128 * cli/cli-cmds.c (source_command): Likewise.
129 * cli/cli-decode.c (add_cmd): Likewise.
130 * cli/cli-script.c (build_command_line): Likewise.
131 (setup_user_args): Likewise.
132 (realloc_body_list): Likewise.
133 (process_next_line): Likewise.
134 (copy_command_lines): Likewise.
135 * cli/cli-setshow.c (do_set_command): Likewise.
136 * coff-pe-read.c (read_pe_exported_syms): Likewise.
137 * coffread.c (coff_locate_sections): Likewise.
138 (coff_symtab_read): Likewise.
139 (coff_read_struct_type): Likewise.
140 * common/cleanups.c (make_my_cleanup2): Likewise.
141 * common/common-exceptions.c (throw_it): Likewise.
142 * common/filestuff.c (make_cleanup_close): Likewise.
143 * common/format.c (parse_format_string): Likewise.
144 * common/queue.h (DEFINE_QUEUE_P): Likewise.
145 * compile/compile-object-load.c (munmap_list_add): Likewise.
146 (compile_object_load): Likewise.
147 * compile/compile-object-run.c (compile_object_run): Likewise.
148 * compile/compile.c (append_args): Likewise.
149 * corefile.c (specify_exec_file_hook): Likewise.
150 * cp-support.c (make_symbol_overload_list): Likewise.
151 * cris-tdep.c (push_stack_item): Likewise.
152 (cris_gdbarch_init): Likewise.
153 * ctf.c (ctf_trace_file_writer_new): Likewise.
154 * dbxread.c (init_header_files): Likewise.
155 (add_new_header_file): Likewise.
156 (init_bincl_list): Likewise.
157 (dbx_end_psymtab): Likewise.
158 (start_psymtab): Likewise.
159 (dbx_end_psymtab): Likewise.
160 * dcache.c (dcache_init): Likewise.
161 * dictionary.c (dict_create_hashed): Likewise.
162 (dict_create_hashed_expandable): Likewise.
163 (dict_create_linear): Likewise.
164 (dict_create_linear_expandable): Likewise.
165 * dtrace-probe.c (dtrace_process_dof_probe): Likewise.
166 * dummy-frame.c (register_dummy_frame_dtor): Likewise.
167 * dwarf2-frame-tailcall.c (cache_new_ref1): Likewise.
168 * dwarf2-frame.c (dwarf2_build_frame_info): Likewise.
169 (decode_frame_entry_1): Likewise.
170 * dwarf2expr.c (new_dwarf_expr_context): Likewise.
171 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise.
172 * dwarf2read.c (dwarf2_has_info): Likewise.
173 (create_signatured_type_table_from_index): Likewise.
174 (dwarf2_read_index): Likewise.
175 (dw2_get_file_names_reader): Likewise.
176 (create_all_type_units): Likewise.
177 (read_cutu_die_from_dwo): Likewise.
178 (init_tu_and_read_dwo_dies): Likewise.
179 (init_cutu_and_read_dies): Likewise.
180 (create_all_comp_units): Likewise.
181 (queue_comp_unit): Likewise.
182 (inherit_abstract_dies): Likewise.
183 (read_call_site_scope): Likewise.
184 (dwarf2_add_field): Likewise.
185 (dwarf2_add_typedef): Likewise.
186 (dwarf2_add_member_fn): Likewise.
187 (attr_to_dynamic_prop): Likewise.
188 (abbrev_table_alloc_abbrev): Likewise.
189 (abbrev_table_read_table): Likewise.
190 (add_include_dir): Likewise.
191 (add_file_name): Likewise.
192 (dwarf_decode_line_header): Likewise.
193 (dwarf2_const_value_attr): Likewise.
194 (dwarf_alloc_block): Likewise.
195 (parse_macro_definition): Likewise.
196 (set_die_type): Likewise.
197 (write_psymtabs_to_index): Likewise.
198 (create_cus_from_index): Likewise.
199 (dwarf2_create_include_psymtab): Likewise.
200 (process_psymtab_comp_unit_reader): Likewise.
201 (build_type_psymtab_dependencies): Likewise.
202 (read_comp_units_from_section): Likewise.
203 (compute_compunit_symtab_includes): Likewise.
204 (create_dwo_unit_in_dwp_v1): Likewise.
205 (create_dwo_unit_in_dwp_v2): Likewise.
206 (read_func_scope): Likewise.
207 (process_structure_scope): Likewise.
208 (mark_common_block_symbol_computed): Likewise.
209 (load_partial_dies): Likewise.
210 (dwarf2_symbol_mark_computed): Likewise.
211 * elfread.c (elf_symfile_segments): Likewise.
212 (elf_read_minimal_symbols): Likewise.
213 * environ.c (make_environ): Likewise.
214 * eval.c (evaluate_subexp_standard): Likewise.
215 * event-loop.c (create_file_handler): Likewise.
216 (create_async_signal_handler): Likewise.
217 (create_async_event_handler): Likewise.
218 (create_timer): Likewise.
219 * exec.c (build_section_table): Likewise.
220 * fbsd-nat.c (fbsd_remember_child): Likewise.
221 * fork-child.c (fork_inferior): Likewise.
222 * frv-tdep.c (new_variant): Likewise.
223 * gdbarch.sh (gdbarch_alloc): Likewise.
224 (append_name): Likewise.
225 * gdbtypes.c (rank_function): Likewise.
226 (copy_type_recursive): Likewise.
227 (add_dyn_prop): Likewise.
228 * gnu-nat.c (make_proc): Likewise.
229 (make_inf): Likewise.
230 (gnu_write_inferior): Likewise.
231 * gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
232 (build_std_type_info_type): Likewise.
233 * guile/scm-param.c (compute_enum_list): Likewise.
234 * guile/scm-utils.c (gdbscm_parse_function_args): Likewise.
235 * guile/scm-value.c (gdbscm_value_call): Likewise.
236 * h8300-tdep.c (h8300_gdbarch_init): Likewise.
237 * hppa-tdep.c (hppa_init_objfile_priv_data): Likewise.
238 (read_unwind_info): Likewise.
239 * ia64-tdep.c (ia64_gdbarch_init): Likewise.
240 * infcall.c (dummy_frame_context_saver_setup): Likewise.
241 (call_function_by_hand_dummy): Likewise.
242 * infcmd.c (step_once): Likewise.
243 (finish_forward): Likewise.
244 (attach_command): Likewise.
245 (notice_new_inferior): Likewise.
246 * inferior.c (add_inferior_silent): Likewise.
247 * infrun.c (add_displaced_stepping_state): Likewise.
248 (save_infcall_control_state): Likewise.
249 (save_inferior_ptid): Likewise.
250 (_initialize_infrun): Likewise.
251 * jit.c (bfd_open_from_target_memory): Likewise.
252 (jit_gdbarch_data_init): Likewise.
253 * language.c (add_language): Likewise.
254 * linespec.c (decode_line_2): Likewise.
255 * linux-nat.c (add_to_pid_list): Likewise.
256 (add_initial_lwp): Likewise.
257 * linux-thread-db.c (add_thread_db_info): Likewise.
258 (record_thread): Likewise.
259 (info_auto_load_libthread_db): Likewise.
260 * m32c-tdep.c (m32c_gdbarch_init): Likewise.
261 * m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise.
262 * m68k-tdep.c (m68k_gdbarch_init): Likewise.
263 * m88k-tdep.c (m88k_analyze_prologue): Likewise.
264 * macrocmd.c (macro_define_command): Likewise.
265 * macroexp.c (gather_arguments): Likewise.
266 * macroscope.c (sal_macro_scope): Likewise.
267 * macrotab.c (new_macro_table): Likewise.
268 * mdebugread.c (push_parse_stack): Likewise.
269 (parse_partial_symbols): Likewise.
270 (parse_symbol): Likewise.
271 (psymtab_to_symtab_1): Likewise.
272 (new_block): Likewise.
273 (new_psymtab): Likewise.
274 (mdebug_build_psymtabs): Likewise.
275 (add_pending): Likewise.
276 (elfmdebug_build_psymtabs): Likewise.
277 * mep-tdep.c (mep_gdbarch_init): Likewise.
278 * mi/mi-main.c (mi_execute_command): Likewise.
279 * mi/mi-parse.c (mi_parse_argv): Likewise.
280 * minidebug.c (lzma_open): Likewise.
281 * minsyms.c (terminate_minimal_symbol_table): Likewise.
282 * mips-linux-nat.c (mips_linux_insert_watchpoint): Likewise.
283 * mips-tdep.c (mips_gdbarch_init): Likewise.
284 * mn10300-tdep.c (mn10300_gdbarch_init): Likewise.
285 * msp430-tdep.c (msp430_gdbarch_init): Likewise.
286 * mt-tdep.c (mt_registers_info): Likewise.
287 * nat/aarch64-linux.c (aarch64_linux_new_thread): Likewise.
288 * nat/linux-btrace.c (linux_enable_bts): Likewise.
289 (linux_enable_pt): Likewise.
290 * nat/linux-osdata.c (linux_xfer_osdata_processes): Likewise.
291 (linux_xfer_osdata_processgroups): Likewise.
292 * nios2-tdep.c (nios2_gdbarch_init): Likewise.
293 * nto-procfs.c (procfs_meminfo): Likewise.
294 * objc-lang.c (start_msglist): Likewise.
295 (selectors_info): Likewise.
296 (classes_info): Likewise.
297 (find_methods): Likewise.
298 * objfiles.c (allocate_objfile): Likewise.
299 (update_section_map): Likewise.
300 * osabi.c (gdbarch_register_osabi): Likewise.
301 (gdbarch_register_osabi_sniffer): Likewise.
302 * parse.c (start_arglist): Likewise.
303 * ppc-linux-nat.c (hwdebug_find_thread_points_by_tid): Likewise.
304 (hwdebug_insert_point): Likewise.
305 * printcmd.c (display_command): Likewise.
306 (ui_printf): Likewise.
307 * procfs.c (create_procinfo): Likewise.
308 (load_syscalls): Likewise.
309 (proc_get_LDT_entry): Likewise.
310 (proc_update_threads): Likewise.
311 * prologue-value.c (make_pv_area): Likewise.
312 (pv_area_store): Likewise.
313 * psymtab.c (extend_psymbol_list): Likewise.
314 (init_psymbol_list): Likewise.
315 (allocate_psymtab): Likewise.
316 * python/py-inferior.c (add_thread_object): Likewise.
317 * python/py-param.c (compute_enum_values): Likewise.
318 * python/py-value.c (valpy_call): Likewise.
319 * python/py-varobj.c (py_varobj_iter_next): Likewise.
320 * python/python.c (ensure_python_env): Likewise.
321 * record-btrace.c (record_btrace_start_replaying): Likewise.
322 * record-full.c (record_full_reg_alloc): Likewise.
323 (record_full_mem_alloc): Likewise.
324 (record_full_end_alloc): Likewise.
325 (record_full_core_xfer_partial): Likewise.
326 * regcache.c (get_thread_arch_aspace_regcache): Likewise.
327 * remote-fileio.c (remote_fileio_init_fd_map): Likewise.
328 * remote-notif.c (remote_notif_state_allocate): Likewise.
329 * remote.c (demand_private_info): Likewise.
330 (remote_notif_stop_alloc_reply): Likewise.
331 (remote_enable_btrace): Likewise.
332 * reverse.c (save_bookmark_command): Likewise.
333 * rl78-tdep.c (rl78_gdbarch_init): Likewise.
334 * rx-tdep.c (rx_gdbarch_init): Likewise.
335 * s390-linux-nat.c (s390_insert_watchpoint): Likewise.
336 * ser-go32.c (dos_get_tty_state): Likewise.
337 (dos_copy_tty_state): Likewise.
338 * ser-mingw.c (ser_windows_open): Likewise.
339 (ser_console_wait_handle): Likewise.
340 (ser_console_get_tty_state): Likewise.
341 (make_pipe_state): Likewise.
342 (net_windows_open): Likewise.
343 * ser-unix.c (hardwire_get_tty_state): Likewise.
344 (hardwire_copy_tty_state): Likewise.
345 * solib-aix.c (solib_aix_new_lm_info): Likewise.
346 * solib-dsbt.c (dsbt_current_sos): Likewise.
347 (dsbt_relocate_main_executable): Likewise.
348 * solib-frv.c (frv_current_sos): Likewise.
349 (frv_relocate_main_executable): Likewise.
350 * solib-spu.c (spu_bfd_fopen): Likewise.
351 * solib-svr4.c (lm_info_read): Likewise.
352 (svr4_copy_library_list): Likewise.
353 (svr4_default_sos): Likewise.
354 * source.c (find_source_lines): Likewise.
355 (line_info): Likewise.
356 (add_substitute_path_rule): Likewise.
357 * spu-linux-nat.c (spu_bfd_open): Likewise.
358 * spu-tdep.c (info_spu_dma_cmdlist): Likewise.
359 * stabsread.c (dbx_lookup_type): Likewise.
360 (read_type): Likewise.
361 (read_member_functions): Likewise.
362 (read_struct_fields): Likewise.
363 (read_baseclasses): Likewise.
364 (read_args): Likewise.
365 (_initialize_stabsread): Likewise.
366 * stack.c (func_command): Likewise.
367 * stap-probe.c (handle_stap_probe): Likewise.
368 * symfile.c (addrs_section_sort): Likewise.
369 (addr_info_make_relative): Likewise.
370 (load_section_callback): Likewise.
371 (add_symbol_file_command): Likewise.
372 (init_filename_language_table): Likewise.
373 * symtab.c (create_filename_seen_cache): Likewise.
374 (sort_search_symbols_remove_dups): Likewise.
375 (search_symbols): Likewise.
376 * target.c (make_cleanup_restore_target_terminal): Likewise.
377 * thread.c (new_thread): Likewise.
378 (enable_thread_stack_temporaries): Likewise.
379 (make_cleanup_restore_current_thread): Likewise.
380 (thread_apply_all_command): Likewise.
381 * tic6x-tdep.c (tic6x_gdbarch_init): Likewise.
382 * top.c (gdb_readline_wrapper): Likewise.
383 * tracefile-tfile.c (tfile_trace_file_writer_new): Likewise.
384 * tracepoint.c (trace_find_line_command): Likewise.
385 (all_tracepoint_actions_and_cleanup): Likewise.
386 (make_cleanup_restore_current_traceframe): Likewise.
387 (get_uploaded_tp): Likewise.
388 (get_uploaded_tsv): Likewise.
389 * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
390 (tui_alloc_win_info): Likewise.
391 (tui_alloc_content): Likewise.
392 (tui_add_content_elements): Likewise.
393 * tui/tui-disasm.c (tui_find_disassembly_address): Likewise.
394 (tui_set_disassem_content): Likewise.
395 * ui-file.c (ui_file_new): Likewise.
396 (stdio_file_new): Likewise.
397 (tee_file_new): Likewise.
398 * utils.c (make_cleanup_restore_integer): Likewise.
399 (add_internal_problem_command): Likewise.
400 * v850-tdep.c (v850_gdbarch_init): Likewise.
401 * valops.c (find_oload_champ): Likewise.
402 * value.c (allocate_value_lazy): Likewise.
403 (record_latest_value): Likewise.
404 (create_internalvar): Likewise.
405 * varobj.c (install_variable): Likewise.
406 (new_variable): Likewise.
407 (new_root_variable): Likewise.
409 (_initialize_varobj): Likewise.
410 * windows-nat.c (windows_make_so): Likewise.
411 * x86-nat.c (x86_add_process): Likewise.
412 * xcoffread.c (arrange_linetable): Likewise.
413 (allocate_include_entry): Likewise.
414 (process_linenos): Likewise.
415 (SYMBOL_DUP): Likewise.
416 (xcoff_start_psymtab): Likewise.
417 (xcoff_end_psymtab): Likewise.
418 * xml-support.c (gdb_xml_parse_attr_ulongest): Likewise.
419 * xtensa-tdep.c (xtensa_register_type): Likewise.
420 * gdbarch.c: Regenerate.
421 * gdbarch.h: Regenerate.
423 2015-08-25 Don Breazeal <donb@codesourcery.com>
425 * infrun.c (follow_exec): Re-order operations for
426 handling follow-exec-mode "new".
427 (handle_inferior_event_1): Assign ecs->event_thread
428 to the current thread.
429 * remote.c (get_remote_arch_state): Add an assertion.
431 2015-08-26 Pedro Alves <palves@redhat.com>
433 * MAINTAINERS: Add Markus Metzger as btrace maintainer.
435 2015-08-25 Pedro Alves <palves@redhat.com>
438 * defs.h (maybe_quit): Declare.
439 (QUIT): Now calls maybe_quit.
440 * event-loop.c (clear_async_signal_handler)
441 (async_signal_handler_is_marked): New functions.
442 * event-loop.h (async_signal_handler_is_marked)
443 (clear_async_signal_handler): New declarations.
444 * remote.c (remote_check_pending_interrupt): New function.
445 (interrupt_query): Use make_cleanup_restore_target_terminal. No
446 longer check whether the target is async. If waiting for a stop
447 reply, and a Ctrl-C as been sent to the target, offer to
448 disconnect, and throw TARGET_CLOSE_ERROR instead of a quit.
449 Otherwise do not disconnect and throw a quit.
450 (_initialize_remote): Install remote_check_pending_interrupt as
451 to_check_pending_interrupt.
452 * target.c (target_check_pending_interrupt): New function.
453 * target.h (struct target_ops) <to_check_pending_interrupt>: New
455 (target_check_pending_interrupt): New declaration.
456 * utils.c (maybe_quit): New function.
457 * target-delegates.c: Regenerate.
459 2015-08-25 Yao Qi <yao.qi@linaro.org>
461 * nat/aarch64-linux-hw-point.c (debug_reg_change_callback):
462 Rename local variable pid to tid, and get lwpid of lwp. Update
465 2015-08-25 Pierre-Marie de Rodat <derodat@adacore.com>
467 * ada-lang.c (ada_read_var_value): Add a var_block argument
468 and pass it to default_read_var_value.
469 * block.c (block_static_link): New accessor.
470 * block.h (block_static_link): Declare it.
471 * buildsym.c (finish_block_internal): Add a static_link
472 argument. If there is a static link, associate it to the new
474 (finish_block): Add a static link argument and pass it to
475 finish_block_internal.
476 (end_symtab_get_static_block): Update calls to finish_block and
477 to finish_block_internal.
478 (end_symtab_with_blockvector): Update call to
479 finish_block_internal.
480 * buildsym.h: Forward-declare struct dynamic_prop.
481 (struct context_stack): Add a static_link field.
482 (finish_block): Add a static link argument.
483 * c-exp.y: Remove an obsolete comment (evaluation of variables
484 already start from the selected frame, and now they climb *up*
485 the call stack) and propagate the block information to the
489 * go-exp.y: Likewise.
490 * jv-exp.y: Likewise.
491 * m2-exp.y: Likewise.
493 * coffread.c (coff_symtab_read): Update calls to finish_block.
494 * dbxread.c (process_one_symbol): Likewise.
495 * xcoffread.c (read_xcoff_symtab): Likewise.
496 * compile/compile-c-symbols.c (convert_one_symbol): Promote the
497 "sym" parameter to struct block_symbol, update its uses and pass
498 its block to calls to read_var_value.
499 (convert_symbol_sym): Update the calls to convert_one_symbol.
500 * compile/compile-loc2c.c (do_compile_dwarf_expr_to_c): Update
501 call to read_var_value.
502 * dwarf2loc.c (block_op_get_frame_base): New.
503 (dwarf2_block_frame_base_locexpr_funcs): Implement the
504 get_frame_base method.
505 (dwarf2_block_frame_base_loclist_funcs): Likewise.
506 (dwarf2locexpr_baton_eval): Add a frame argument and use it
507 instead of the selected frame in order to evaluate the
509 (dwarf2_evaluate_property): Add a frame argument. Update call
510 to dwarf2_locexpr_baton_eval to provide a frame in available and
511 to handle the absence of address stack.
512 * dwarf2loc.h (dwarf2_evaluate_property): Add a frame argument.
513 * dwarf2read.c (attr_to_dynamic_prop): Add a forward
515 (read_func_scope): Record any available static link description.
516 Update call to finish_block.
517 (read_lexical_block_scope): Update call to finish_block.
518 * findvar.c (follow_static_link): New.
519 (get_hosting_frame): New.
520 (default_read_var_value): Add a var_block argument. Use
521 get_hosting_frame to handle non-local references.
522 (read_var_value): Add a var_block argument and pass it to the
523 LA_READ_VAR_VALUE method.
524 * gdbtypes.c (resolve_dynamic_range): Update calls to
525 dwarf2_evaluate_property.
526 (resolve_dynamic_type_internal): Likewise.
527 * guile/scm-frame.c (gdbscm_frame_read_var): Update call to
528 read_var_value, passing it the block coming from symbol lookup.
529 * guile/scm-symbol.c (gdbscm_symbol_value): Update call to
530 read_var_value (TODO).
531 * infcmd.c (finish_command_continuation): Update call to
532 read_var_value, passing it the block coming from symbol lookup.
533 * infrun.c (insert_exception_resume_breakpoint): Likewise.
534 * language.h (struct language_defn): Add a var_block argument to
535 the LA_READ_VAR_VALUE method.
536 * objfiles.c (struct static_link_htab_entry): New.
537 (static_link_htab_entry_hash): New.
538 (static_link_htab_entry_eq): New.
539 (objfile_register_static_link): New.
540 (objfile_lookup_static_link): New.
541 (free_objfile): Free the STATIC_LINKS hashed map if needed.
542 * objfiles.h: Include hashtab.h.
543 (struct objfile): Add a static_links field.
544 (objfile_register_static_link): New.
545 (objfile_lookup_static_link): New.
546 * printcmd.c (print_variable_and_value): Update call to
548 * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
549 * python/py-frame.c (frapy_read_var): Update call to
550 read_var_value, passing it the block coming from symbol lookup.
551 * python/py-framefilter.c (extract_sym): Add a sym_block
552 parameter and set the pointed value to NULL (TODO).
553 (enumerate_args): Update call to extract_sym.
554 (enumerate_locals): Update calls to extract_sym and to
556 * python/py-symbol.c (sympy_value): Update call to
557 read_var_value (TODO).
558 * stack.c (read_frame_local): Update call to read_var_value.
559 (read_frame_arg): Likewise.
560 (return_command): Likewise.
561 * symtab.h (struct symbol_block_ops): Add a get_frame_base
563 (struct symbol): Add a block field.
564 (SYMBOL_BLOCK): New accessor.
565 * valops.c (value_of_variable): Remove frame/block handling and
566 pass the block argument to read_var_value, which does this job
568 (value_struct_elt_for_reference): Update calls to
570 (value_of_this): Pass the block found to read_var_value.
571 * value.h (read_var_value): Add a var_block argument.
572 (default_read_var_value): Likewise.
574 2015-08-25 Yao Qi <yao.qi@linaro.org>
576 * aarch64-linux-nat.c (aarch64_linux_new_thread): Move it to ...
577 * nat/aarch64-linux.c (aarch64_linux_new_thread): ... here.
578 * nat/aarch64-linux.h (aarch64_linux_new_thread): Declare.
580 2015-08-25 Yao Qi <yao.qi@linaro.org>
582 * Makefile.in (aarch64-liunx.o): New rule.
583 (HFILES_NO_SRCDIR): Add aarch64-linux.h.
584 * config/aarch64/linux.mh (NAT_FILE): Add aarch64-linux.o.
585 * aarch64-linux-nat.c: Include nat/aarch64-linux.h.
586 * aarch64-linux-nat.c (aarch64_get_debug_reg_state): Make it
588 (aarch64_linux_prepare_to_resume): Move it nat/aarch64-linux.c.
589 * nat/aarch64-linux-hw-point.h (aarch64_debug_reg_state): Declare
590 * nat/aarch64-linux.c: New file.
591 * nat/aarch64-linux.h: New file.
593 2015-08-25 Yao Qi <yao.qi@linaro.org>
595 * aarch64-linux-nat.c (aarch64_linux_prepare_to_resume): Use
596 lwp_arch_private_info and ptid_of_lwp.
598 2015-08-25 Yao Qi <yao.qi@linaro.org>
600 * aarch64-linux-nat.c (struct arch64_dr_update_callback_param):
601 Move it to nat/aarch64-linux-hw-point.c.
602 (debug_reg_change_callback): Likewise.
603 (aarch64_notify_debug_reg_change): :Likewise.
604 * nat/aarch64-linux-hw-point.c: Include nat/linux-nat.h.
605 (aarch64_dr_update_callback_param): New.
606 (debug_reg_change_callback): New function.
607 (aarch64_notify_debug_reg_change): Likewise.
608 * nat/aarch64-linux-hw-point.h (aarch64_notify_debug_reg_change):
609 Remove the declaration.
611 2015-08-25 Yao Qi <yao.qi@linaro.org>
613 * aarch64-linux-nat.c (aarch64_notify_debug_reg_change):
614 Call current_lwp_ptid.
616 2015-08-25 Yao Qi <yao.qi@linaro.org>
618 * aarch64-linux-nat.c (debug_reg_change_callback): Use
621 2015-08-25 Yao Qi <yao.qi@linaro.org>
623 * aarch64-linux-nat.c (debug_reg_change_callback): Call
624 ptid_get_pid rather than ptid_get_lwp.
626 2015-08-24 Pedro Alves <palves@redhat.com>
628 * NEWS (New commands): Mention set/show remote
629 multiprocess-extensions-packet.
630 * remote.c (remote_query_supported): Only tell the server to use
631 the multiprocess extensions if the user hasn't force-disabled them
632 with "set remote multiprocess-extensions-packet off".
634 2015-08-24 Pedro Alves <palves@redhat.com>
636 * gnulib/update-gnulib.sh (GNULIB_COMMIT_SHA1): Set to
637 1029a8112290f6eee9d7878a391c49db42c999bd.
638 * gnulib/configure, gnulib/config.in, gnulib/aclocal.m4:
640 * gnulib/import/Makefile.am: Update.
641 * gnulib/import/Makefile.in: Update.
642 * gnulib/import/alloca.in.h: Update.
643 * gnulib/import/basename-lgpl.c: Update.
644 * gnulib/import/canonicalize-lgpl.c: Update.
645 * gnulib/import/config.charset: Update.
646 * gnulib/import/dirent.in.h: Update.
647 * gnulib/import/dirfd.c: Update.
648 * gnulib/import/dirname-lgpl.c: Update.
649 * gnulib/import/dirname.h: Update.
650 * gnulib/import/dosname.h: Update.
651 * gnulib/import/errno.in.h: Update.
652 * gnulib/import/extra/snippet/arg-nonnull.h: Update.
653 * gnulib/import/extra/snippet/c++defs.h: Update.
654 * gnulib/import/extra/snippet/warn-on-use.h: Update.
655 * gnulib/import/extra/update-copyright: Update.
656 * gnulib/import/float+.h: Update.
657 * gnulib/import/float.c: Update.
658 * gnulib/import/float.in.h: Update.
659 * gnulib/import/fnmatch.c: Update.
660 * gnulib/import/fnmatch.in.h: Update.
661 * gnulib/import/fnmatch_loop.c: Update.
662 * gnulib/import/fpucw.h: Update.
663 * gnulib/import/frexp.c: Update.
664 * gnulib/import/frexpl.c: Update.
665 * gnulib/import/gettimeofday.c: Update.
666 * gnulib/import/inttypes.in.h: Update.
667 * gnulib/import/isnan.c: Update.
668 * gnulib/import/isnand-nolibm.h: Update.
669 * gnulib/import/isnand.c: Update.
670 * gnulib/import/isnanl-nolibm.h: Update.
671 * gnulib/import/isnanl.c: Update.
672 * gnulib/import/itold.c: Update.
673 * gnulib/import/localcharset.c: Update.
674 * gnulib/import/localcharset.h: Update.
675 * gnulib/import/lstat.c: Update.
676 * gnulib/import/m4/00gnulib.m4: Update.
677 * gnulib/import/m4/absolute-header.m4: Update.
678 * gnulib/import/m4/alloca.m4: Update.
679 * gnulib/import/m4/canonicalize.m4: Update.
680 * gnulib/import/m4/codeset.m4: Update.
681 * gnulib/import/m4/configmake.m4: Update.
682 * gnulib/import/m4/dirent_h.m4: Update.
683 * gnulib/import/m4/dirfd.m4: Update.
684 * gnulib/import/m4/dirname.m4: Update.
685 * gnulib/import/m4/double-slash-root.m4: Update.
686 * gnulib/import/m4/eealloc.m4: Update.
687 * gnulib/import/m4/errno_h.m4: Update.
688 * gnulib/import/m4/exponentd.m4: Update.
689 * gnulib/import/m4/exponentl.m4: Update.
690 * gnulib/import/m4/extensions.m4: Update.
691 * gnulib/import/m4/extern-inline.m4: Update.
692 * gnulib/import/m4/fcntl-o.m4: Update.
693 * gnulib/import/m4/float_h.m4: Update.
694 * gnulib/import/m4/fnmatch.m4: Update.
695 * gnulib/import/m4/fpieee.m4: Update.
696 * gnulib/import/m4/frexp.m4: Update.
697 * gnulib/import/m4/frexpl.m4: Update.
698 * gnulib/import/m4/gettimeofday.m4: Update.
699 * gnulib/import/m4/glibc21.m4: Update.
700 * gnulib/import/m4/gnulib-cache.m4: Update.
701 * gnulib/import/m4/gnulib-common.m4: Update.
702 * gnulib/import/m4/gnulib-comp.m4: Update.
703 * gnulib/import/m4/gnulib-tool.m4: Update.
704 * gnulib/import/m4/include_next.m4: Update.
705 * gnulib/import/m4/inttypes-pri.m4: Update.
706 * gnulib/import/m4/inttypes.m4: Update.
707 * gnulib/import/m4/isnand.m4: Update.
708 * gnulib/import/m4/isnanl.m4: Update.
709 * gnulib/import/m4/largefile.m4: Update.
710 * gnulib/import/m4/localcharset.m4: Update.
711 * gnulib/import/m4/locale-fr.m4: Update.
712 * gnulib/import/m4/locale-ja.m4: Update.
713 * gnulib/import/m4/locale-zh.m4: Update.
714 * gnulib/import/m4/longlong.m4: Update.
715 * gnulib/import/m4/lstat.m4: Update.
716 * gnulib/import/m4/malloc.m4: Update.
717 * gnulib/import/m4/malloca.m4: Update.
718 * gnulib/import/m4/math_h.m4: Update.
719 * gnulib/import/m4/mbrtowc.m4: Update.
720 * gnulib/import/m4/mbsinit.m4: Update.
721 * gnulib/import/m4/mbsrtowcs.m4: Update.
722 * gnulib/import/m4/mbstate_t.m4: Update.
723 * gnulib/import/m4/memchr.m4: Update.
724 * gnulib/import/m4/memmem.m4: Update.
725 * gnulib/import/m4/mmap-anon.m4: Update.
726 * gnulib/import/m4/multiarch.m4: Update.
727 * gnulib/import/m4/nocrash.m4: Update.
728 * gnulib/import/m4/off_t.m4: Update.
729 * gnulib/import/m4/pathmax.m4: Update.
730 * gnulib/import/m4/readlink.m4: Update.
731 * gnulib/import/m4/rename.m4: Update.
732 * gnulib/import/m4/rmdir.m4: Update.
733 * gnulib/import/m4/ssize_t.m4: Update.
734 * gnulib/import/m4/stat.m4: Update.
735 * gnulib/import/m4/stdbool.m4: Update.
736 * gnulib/import/m4/stddef_h.m4: Update.
737 * gnulib/import/m4/stdint.m4: Update.
738 * gnulib/import/m4/stdio_h.m4: Update.
739 * gnulib/import/m4/stdlib_h.m4: Update.
740 * gnulib/import/m4/string_h.m4: Update.
741 * gnulib/import/m4/strstr.m4: Update.
742 * gnulib/import/m4/strtok_r.m4: Update.
743 * gnulib/import/m4/sys_socket_h.m4: Update.
744 * gnulib/import/m4/sys_stat_h.m4: Update.
745 * gnulib/import/m4/sys_time_h.m4: Update.
746 * gnulib/import/m4/sys_types_h.m4: Update.
747 * gnulib/import/m4/time_h.m4: Update.
748 * gnulib/import/m4/unistd_h.m4: Update.
749 * gnulib/import/m4/warn-on-use.m4: Update.
750 * gnulib/import/m4/wchar_h.m4: Update.
751 * gnulib/import/m4/wchar_t.m4: Update.
752 * gnulib/import/m4/wctype_h.m4: Update.
753 * gnulib/import/m4/wint_t.m4: Update.
754 * gnulib/import/malloc.c: Update.
755 * gnulib/import/malloca.c: Update.
756 * gnulib/import/malloca.h: Update.
757 * gnulib/import/math.in.h: Update.
758 * gnulib/import/mbrtowc.c: Update.
759 * gnulib/import/mbsinit.c: Update.
760 * gnulib/import/mbsrtowcs-impl.h: Update.
761 * gnulib/import/mbsrtowcs-state.c: Update.
762 * gnulib/import/mbsrtowcs.c: Update.
763 * gnulib/import/memchr.c: Update.
764 * gnulib/import/memmem.c: Update.
765 * gnulib/import/pathmax.h: Update.
766 * gnulib/import/readlink.c: Update.
767 * gnulib/import/ref-add.sin: Update.
768 * gnulib/import/ref-del.sin: Update.
769 * gnulib/import/rename.c: Update.
770 * gnulib/import/rmdir.c: Update.
771 * gnulib/import/same-inode.h: Update.
772 * gnulib/import/stat.c: Update.
773 * gnulib/import/stdbool.in.h: Update.
774 * gnulib/import/stddef.in.h: Update.
775 * gnulib/import/stdint.in.h: Update.
776 * gnulib/import/stdio.c: Update.
777 * gnulib/import/stdio.in.h: Update.
778 * gnulib/import/stdlib.in.h: Update.
779 * gnulib/import/str-two-way.h: Update.
780 * gnulib/import/streq.h: Update.
781 * gnulib/import/string.in.h: Update.
782 * gnulib/import/stripslash.c: Update.
783 * gnulib/import/strnlen1.c: Update.
784 * gnulib/import/strnlen1.h: Update.
785 * gnulib/import/strstr.c: Update.
786 * gnulib/import/strtok_r.c: Update.
787 * gnulib/import/sys_stat.in.h: Update.
788 * gnulib/import/sys_time.in.h: Update.
789 * gnulib/import/sys_types.in.h: Update.
790 * gnulib/import/time.in.h: Update.
791 * gnulib/import/unistd.in.h: Update.
792 * gnulib/import/verify.h: Update.
793 * gnulib/import/wchar.in.h: Update.
794 * gnulib/import/wctype.in.h: Update.
795 * gnulib/import/gettimeofday.c: New file.
796 * gnulib/import/m4/absolute-header.m4: New file.
797 * gnulib/import/m4/gettimeofday.m4: New file.
798 * gnulib/import/m4/sys_socket_h.m4: New file.
799 * gnulib/import/m4/sys_time_h.m4: New file.
800 * gnulib/import/stdio.c: Delete file.
801 * gnulib/import/sys_time.in.h: New file.
803 2015-08-24 Pedro Alves <palves@redhat.com>
805 * Makefile.in (HFILES_NO_SRCDIR): Add common/gdb_sys_time.h.
806 * common/gdb_sys_time.h: New file.
807 * event-loop.c: Include gdb_sys_time.h instead of sys/time.h.
808 * gdb_select.h: Likewise.
809 * gdb_usleep.c: Likewise.
811 * mi/mi-main.c: Likewise.
812 * mi/mi-parse.h: Likewise.
813 * remote-fileio.c: Likewise.
814 * remote-m32r-sdi.c: Likewise.
815 * remote.c: Likewise.
816 * ser-base.c: Likewise.
817 * ser-pipe.c: Likewise.
818 * ser-tcp.c: Likewise.
819 * ser-unix.c: Likewise.
820 * symfile.c: Likewise.
821 * symfile.c: Likewise. Rename OSIZE to SIZE throughout.
822 * target-memory.c: Include gdb_sys_time.h instead of sys/time.h.
825 2015-08-24 Pedro Alves <palves@redhat.com>
827 * NEWS: Mention removed support for the various ROM monitors.
828 * Makefile.in (ALL_TARGET_OBS): Remove dbug-rom.o, dink32-rom.o,
829 ppcbug-rom.o, m32r-rom.o, dsrec.o and monitor.o from gdb_target_obs.
830 * configure.tgt (h8300-*-*): Remove monitor.o and m32r-rom.o from
832 (m68*-*-*): Remove monitor.o dbug-rom.o and dsrec.o from
834 (microblaze*-linux-*): Remove microblaze-rom.o, monitor.o and
835 dsrec.o from gdb_target_obs.
836 (microblaze*-*-*): Remove microblaze-rom.o, monitor.o and dsrec.o
838 (powerpc-*-lynx*178): Remove monitor.o and dsrec.o from
840 (powerpc*-*-*): Remove monitor.o, dsrec.o, ppcbug-rom.o and
841 dink32-rom.o from gdb_target_obs.
842 (sh*-*-linux*): Remove monitor.o and dsrec.o from gdb_target_obs.
843 (sh*): Remove monitor.o and dsrec.o from gdb_target_obs.
844 * dbug-rom.c, dink32-rom.c, dsrec.c, m32r-rom.c, microblaze-rom.c,
845 monitor.c, monitor.h, ppcbug-rom.c, srec.h: Delete files.
847 2015-08-21 Pedro Alves <palves@redhat.com>
849 * frame.c (null_frame_id): Explicitly zero-initialize.
851 2015-08-21 Tom Tromey <tromey@redhat.com>
853 * dwarf2read.c (struct dwarf2_section_info): Rename field
854 'asection' to 'section'.
855 (dwarf2_has_info, get_section_bfd_owner, get_section_bfd_section)
856 (dwarf2_locate_sections, dwarf2_locate_sections)
857 (locate_dwz_sections, locate_v1_virtual_dwo_sections)
858 (dwarf2_locate_dwo_sections, dwarf2_locate_dwo_sections)
859 (dwarf2_locate_v2_dwp_sections): Adjust.
861 2015-08-21 Patrick Palka <patrick@parcs.ath.cx>
863 * top.h (gdb_in_secondary_prompt_p): Declare.
864 * top.c (gdb_secondary_prompt_depth): Define.
865 (gdb_in_secondary_prompt_p): Define.
866 (gdb_readline_wrapper_cleanup): Decrement
867 gdb_secondary_prompt_depth.
868 (gdb_readline_wrapper): Increment gdb_secondary_prompt_depth.
869 * tui/tui-io.c (tui_getc): Don't clear the prompt line if we
870 are in a secondary prompt.
872 2015-08-21 Patrick Palka <patrick@parcs.ath.cx>
874 * tui/tui-io.c (tui_getc): Use tui_putc instead of waddch to
877 2015-08-21 Gary Benson <gbenson@redhat.com>
879 * gdb_bfd.c (gdb_bfd_iovec_fileio_pread): Add QUIT call.
881 2015-08-21 Gary Benson <gbenson@redhat.com>
883 * target.h (struct target_ops) <to_fileio_open>: New argument
884 warn_if_slow. Update comment. All implementations updated.
885 (target_fileio_open_warn_if_slow): New declaration.
886 * target.c (target_fileio_open): Renamed as...
887 (target_fileio_open_1): ...this. New argument warn_if_slow.
888 Pass warn_if_slow to implementation. Update debug printing.
889 (target_fileio_open): New function.
890 (target_fileio_open_warn_if_slow): Likewise.
891 * gdb_bfd.c (gdb_bfd_iovec_fileio_open): Use new function
892 target_fileio_open_warn_if_slow.
894 2015-08-21 Gary Benson <gbenson@redhat.com>
896 * nat/linux-namespaces.c (linux_mntns_access_fs):
897 Do not overwrite old_chain.
899 2015-08-20 Max Filippov <jcmvbkbc@gmail.com>
901 * arch/xtensa.h: New file.
902 * xtensa-linux-nat.c (gdb_proc_service.h): New #include.
903 (ps_get_thread_area): New function.
904 * xtensa-linux-tdep.c (xtensa_linux_init_abi): Add call to
905 set_gdbarch_fetch_tls_load_module_address to enable TLS support.
906 * xtensa-tdep.c (osabi.h): New #include.
907 (xtensa_gdbarch_init): Call gdbarch_init_osabi to register
908 xtensa-specific hooks.
909 * xtensa-tdep.h (struct xtensa_elf_gregset_t): Add threadptr
910 member and move the structure to arch/xtensa.h.
912 2015-08-21 Pedro Alves <palves@redhat.com>
914 * remote.c (struct readahead_cache): New.
915 (struct remote_state) <readahead_cache>: New field.
916 (remote_open_1): Invalidate the cache.
917 (readahead_cache_invalidate, readahead_cache_invalidate_fd): New
919 (remote_hostio_pwrite): Invalidate the readahead cache.
920 (remote_hostio_pread): Rename to ...
921 (remote_hostio_pread_vFile): ... this.
922 (remote_hostio_pread_from_cache): New function.
923 (remote_hostio_pread): Reimplement.
924 (remote_hostio_close): Invalidate the readahead cache.
926 2015-08-21 Marcin Cieślak <saper@saper.info> (tiny patch)
929 * procfs.c: Include "filestuff.h".
931 2015-08-21 Patrick Palka <patrick@parcs.ath.cx>
933 * tui/tui-data.h (tui_command_info): Remove fields cur_line and
935 * tui/tui-data.c (tui_clear_win_detail) [CMD_WIN]: Don't set
936 cur_line or curch, instead call wmove().
937 (init_win_info) [CMD_WIN]: Likewise.
938 * tui/tui-io.c (tui_puts): Likewise. Don't read cur_line,
939 instead call getcury().
940 (tui_redisplay_readline): Don't set cur_line or curch.
941 (tui_mld_erase_entire_line): Don't read cur_line, instead call
943 (tui_cont_sig): Remove call to wmove.
944 (tui_getc): Don't read cur_line or curch, instead call getcury()
945 or getyx(). Don't set curch.
946 * tui/tui-win.c (make_visible_with_new_height) [CMD_WIN]: Don't
947 set cur_line or curch. Always move cursor to (0,0).
949 2015-08-20 Pedro Alves <palves@redhat.com>
951 * infrun.c (print_target_wait_results): Make extern.
952 * infrun.h (print_target_wait_results): Declare.
953 * remote.c (set_stop_requested_callback): Delete.
954 (process_initial_stop_replies): New function.
955 (remote_start_remote): Use it.
956 (stop_reply_queue_length): New function.
958 2015-08-20 Pedro Alves <palves@redhat.com>
960 * dwarf2read.c (process_full_comp_unit): To tell whether
961 start_subfile managed to deduce a language, test for
962 language_unknown instead of language_c.
964 2015-08-20 Pierre-Marie de Rodat <derodat@adacore.com>
966 * ada-lex.l: Reset the start condition to INITIAL in the rule that
969 2015-08-19 Kevin Buettner <kevinb@redhat.com>
971 * dwarf2read.c (dwarf2_string_attr): New function.
972 (lookup_dwo_unit, process_psymtab_comp_unit_reader)
973 (dwarf2_compute_name, dwarf2_physname, find_file_and_directory)
974 (read_call_site_scope, namespace_name, guess_full_die_structure_name)
975 (anonymous_struct_prefix, prepare_one_comp_unit): Use
976 dwarf2_string_attr in place of dwarf2_attr and DW_STRING.
978 2015-08-18 Doug Evans <dje@google.com>
979 Adrian Sendroiu <adrian.sendroiu@freescale.com>
982 * cli/cli-logging.c (pop_output_files): Don't restore redirection
984 * mi/mi-out.c: #include "vec.h".
985 (ui_filep): New type.
986 (DEV_VEC_P (ui_filep)): New type.
987 (struct ui_out_data) <buffer, original_buffer>: Delete.
988 (struct ui_out_data) <streams>: New member.
989 (mi_ui_out_impl): Add data_destroy field.
990 (mi_field_string, mi_field_fmt): Update.
991 (mi_flush, mi_redirect, field_separator): Update.
992 (mi_open, mi_close): Update.
993 (mi_out_buffered, mi_out_rewind, mi_out_put): Update.
994 (mi_out_data_ctor, mi_out_data_dtor): New functions.
995 (mi_out_new): Call mi_out_data_ctor.
997 2015-08-18 Sandra Loosemore <sandra@codesourcery.com>
999 * remote.c (strprefix): New.
1000 (remote_parse_stop_reply): Use strprefix instead of strncmp
1001 to ensure exact match of keyword.
1003 2015-08-18 Andrew Burgess <andrew.burgess@embecosm.com>
1005 * gdb_bfd.c (debug_bfd_cache): New variable.
1006 (show_bfd_cache_debug): New function.
1007 (gdb_bfd_open): Add debug logging.
1008 (gdb_bfd_ref): Likewise.
1009 (gdb_bfd_unref): Likewise.
1010 (_initialize_gdb_bfd): Add new set/show command.
1011 * NEWS: Mention new command.
1013 2015-08-18 Andrew Burgess <andrew.burgess@embecosm.com>
1015 * gdb_bfd.c (bfd_sharing): New variable.
1016 (show_bfd_sharing): New function.
1017 (gdb_bfd_open): Check bfd_sharing variable.
1018 (_initialize_gdb_bfd): Add new set/show command.
1019 * NEWS: Mention new command.
1021 2015-08-18 Andrew Burgess <andrew.burgess@embecosm.com>
1023 * gdb_bfd.c (struct gdb_bfd_data): Add size, inode, and device id
1025 (struct gdb_bfd_cache_search): Likewise.
1026 (eq_bfd): Compare the size, inode, and device id fields.
1027 (gdb_bfd_open): Initialise the size, inode, and device id fields.
1028 (gdb_bfd_ref): Likewise.
1029 (gdb_bfd_unref): Likewise.
1031 2015-08-18 Pedro Alves <palves@redhat.com>
1033 * linux-nat.c (linux_nat_always_non_stop_p): If the linux_ops
1034 target implements to_always_non_stop_p, call it.
1035 * x86-linux-nat.c (x86_linux_always_non_stop_p): New function.
1036 (x86_linux_create_target): Install it as to_always_non_stop_p
1039 2015-08-17 Doug Evans <dje@google.com>
1041 * ui-out.c (default_ui_out_impl): Add comment.
1043 2015-08-17 Iain Buclaw <ibuclaw@gdcproject.org>
1045 * d-exp.y (type_aggregate_p): New function.
1046 (PrimaryExpression : TypeExp '.' IdentifierExp): Use it.
1047 (classify_inner_name): Likewise.
1048 * d-namespace.c (d_lookup_nested_symbol): Handle TYPE_CODE_ENUM.
1050 2015-08-15 Doug Evans <xdje42@gmail.com>
1052 * psymtab.c (add_psymbol_to_bcache): Remove "val" arg. All callers
1054 (add_psymbol_to_list): Ditto.
1056 2015-08-15 Doug Evans <xdje42@gmail.com>
1058 * dbxread.c (dbx_end_psymtab): Renamed from end_psymtab. All callers
1059 updated. Call end_psymtab_common.
1060 * dwarf2read.c (process_psymtab_comp_unit_reader): Call
1062 (build_type_psymtabs_reader): Ditto.
1063 * psympriv.h (sort_pst_symbols): Delete.
1064 (end_psymtab_common): Declare.
1065 * psymtab.c (sort_pst_symbols): Make static.
1066 (end_psymtab_common): New function.
1067 * xcoffread.c (xcoff_end_psymtab): Call end_psymtab_common.
1069 2015-08-15 Doug Evans <xdje42@gmail.com>
1071 * defs.h (LANGUAGE_BITS): Define.
1072 * psympriv.h (partial_symbol) <domain>: Use SYMBOL_DOMAIN_BITS.
1073 (partial_symbol) <aclass>: Use SYMBOL_ACLASS_BITS.
1074 * symtab.h (general_symbol_info> <language>: Usage LANGUAGE_BITS.
1075 (minimal_symbol_type): Add nr_minsym_types.
1076 (MINSYM_TYPE_BITS): Define.
1077 (minimal_symbol) <type>: Use MINSYM_TYPE_BITS.
1078 (domain_enum_tag): Add NR_DOMAINS.
1079 (SYMBOL_DOMAIN_BITS): Change from 4 to 3.
1080 (SYMBOL_ACLASS_BITS): Define from 6 to 5.
1082 2015-08-15 Doug Evans <xdje42@gmail.com>
1084 * objfiles.h: Whitespace cleanup.
1085 * psympriv.h: Whitespace cleanup.
1086 * psymtab.c: Whitespace/coding convention cleanup.
1088 2015-08-15 Patrick Palka <patrick@parcs.ath.cx>
1090 * inferior.c (detach_inferior_command): Don't call
1091 any_thread_of_process when pid is 0.
1092 (kill_inferior_command): Likewise.
1094 2015-08-14 Doug Evans <xdje42@gmail.com>
1097 * NEWS: Document new /s modifier for the disassemble command.
1098 * cli/cli-cmds.c (disassemble_command): Add support for /s.
1099 (_initialize_cli_cmds): Update online docs of disassemble command.
1100 * disasm.c: #include "source.h".
1101 (struct deprecated_dis_line_entry): Renamed from dis_line_entry.
1103 (dis_line_entry): New struct.
1104 (hash_dis_line_entry, eq_dis_line_entry): New functions.
1105 (allocate_dis_line_table): New functions.
1106 (maybe_add_dis_line_entry, line_has_code_p): New functions.
1107 (dump_insns): New arg end_pc. All callers updated.
1108 (do_mixed_source_and_assembly_deprecated): Renamed from
1109 do_mixed_source_and_assembly. All callers updated.
1110 (do_mixed_source_and_assembly): New function.
1111 (gdb_disassembly): Handle /s (DISASSEMBLY_SOURCE).
1112 * disasm.h (DISASSEMBLY_SOURCE_DEPRECATED): Renamed from
1113 DISASSEMBLY_SOURCE. All uses updated.
1114 (DISASSEMBLY_SOURCE): New macro.
1115 * mi/mi-cmd-disas.c (mi_cmd_disassemble): New modes 4,5.
1117 2015-08-14 Keith Seitz <keiths@redhat.com>
1119 * d-exp.y (PrimaryExpression : TypeExp '.' IdentifierExp): Rename
1120 `typename' to `type_name' to avoid C++ reserved word.
1122 2015-08-14 Keith Seitz <keiths@redhat.com>
1124 * location.c (EL_TYPE, EL_LINESPEC, EL_PROBE, EL_ADDRESS)
1125 (EL_EXPLICIT, EL_STRING): Change macro parameter to "P" to
1128 2015-08-14 Iain Buclaw <ibuclaw@gdcproject.org>
1130 * d-exp.y (PrimaryExpression : TypeExp '.' IdentifierExp): Use
1131 xstrprintf instead of malloc and sprintf.
1132 (PrimaryExpression : IdentifierExp): Avoid operator at end of line.
1133 (lex_one_token): Likewise.
1135 2015-08-14 Matthew Fortune <matthew.fortune@imgtec.com>
1137 * solib-svr4.c (read_program_header): Add base_addr argument to
1138 report the runtime address of the segment.
1139 (find_program_interpreter): Update read_program_header call to pass
1140 a NULL pointer for the new argument.
1141 (scan_dyntag): Add ptr_addr argument to report the runtime address
1143 (scan_dyntag_auxv): Likewise and use thew new base_addr argument of
1144 read_program_header to get the base address of the dynamic segment.
1145 (elf_locate_base): Update uses of scan_dyntag, scan_dyntag_auxv and
1146 read_program_header.
1147 (elf_locate_base): Scan for and handle DT_MIPS_RLD_MAP_REL.
1149 2015-08-14 Matthew Fortune <matthew.fortune@imgtec.com>
1151 * MAINTAINERS (Write After Approval): Add Matthew Fortune.
1153 2015-08-13 Iain Buclaw <ibuclaw@gdcproject.org>
1155 * d-exp.y (%union): Add voidval.
1156 (%token): Add UNKNOWN_NAME as a token to represent an unclassified
1157 name in the lexing stage.
1158 (PostfixExpression): Move symbol completion handling in grammar here
1159 from PrimaryExpression.
1160 (PrimaryExpression): Move routines to handle resolving identifier
1161 tokens in the grammar here from push_expression_name.
1162 (IdentifierExp): Remove the handling of alternating '.' and identifier
1164 (TypeExp): Allow TypeExp to be wrapped in parenthesis in the grammar.
1165 (BasicType): Remove C-style typename rules.
1166 (d_type_from_name, d_module_from_name, push_variable)
1167 (push_fieldnames, push_type_name, push_module_name)
1168 (push_expression_name): Remove.
1169 (lex_one_token): Rename from yylex. Replace pstate with par_state.
1170 (token_and_value): New type.
1171 (token_fifo, popping, name_obstack): New globals.
1172 (classify_name): New function.
1173 (classify_inner_name): Likewise.
1175 (d_parse): Initialize token_fifo, popping and name_obstack.
1177 2015-08-13 Iain Buclaw <ibuclaw@gdcproject.org>
1179 * Makefile.in (SFILES): Add d-namespace.c.
1180 (COMMON_OBS): Add d-namespace.o.
1181 * d-lang.c (d_language_defn): Use d_lookup_symbol_nonlocal as the
1182 la_lookup_symbol_nonlocal callback function pointer.
1183 * d-lang.h (d_lookup_symbol_nonlocal): New declaration.
1184 (d_lookup_nested_symbol): New declaration.
1185 * d-namespace.c: New file.
1187 2015-08-13 Pedro Alves <palves@redhat.com>
1189 * python/py-unwind.c (pyuw_sniffer): Install the invalidate
1190 cleanup after the decref cleanup, not before.
1192 2015-08-13 Pierre-Marie de Rodat <derodat@adacore.com>
1194 * ada-lang.c: Include namespace.h
1195 (aux_add_nonlocal_symbols): Fix a function name in comment.
1196 (ada_add_block_renamings): New.
1197 (add_nonlocal_symbols): Add global renamings handling.
1198 (ada_lookup_symbol_list_worker): Move the symbol lookup part
1200 (ada_add_all_symbols): ... this new function.
1201 (ada_add_block_symbols): Try to match the input name against the
1202 "using directives list", perform a recursive symbol lookup on
1203 the matched declarations.
1204 * block.h (struct block): Move the_namespace to top-level as
1205 namespace_info. Remove the language_specific field.
1206 (BLOCK_NAMESPACE): Update access to the namespace_info field.
1207 * buildsym.h (using_directives): Rename into...
1208 (local_using_directives): ... this.
1209 (global_using_directives): New.
1210 (struct context_stack): Rename the using_directives field into
1211 local_using_directives.
1212 * buildsym.c (finish_block_internal): Deal with the proper
1213 using directives repository (local or global).
1214 (prepare_for_building): Reset local_using_directives. Assert
1215 that there is no pending global using directive.
1216 (reset_symtab_globals): Reset global_using_directives and
1217 local_using_directives.
1218 (end_symtab_get_static_block): Don't ignore symtabs that have
1219 only using directives.
1220 (push_context): Update references to local_using_directives.
1221 (buildsym_init): Do not reset using_directives.
1222 * cp-support.c: Include namespace.h.
1223 * cp-support.h (struct using_direct): Move to namespace.h.
1224 (cp_add_using_directives): Move to namespace.h.
1225 * cp-namespace.c: Include namespace.h
1226 (cp_add_using_directive): Move to namespace.c, rename it to
1227 add_using_directive, add a "using_directives" argument and use
1228 it as the pending using directives repository. All callers
1230 * dwarf2read.c (using_directives): New.
1231 (read_import_statement): Call using_directives.
1232 (read_func_scope): Update references to local_using_directives.
1233 (read_lexical_block_scope): Likewise.
1234 (read_namespace): Update the heading comment, call
1236 * namespace.h: New file.
1237 * namespace.c: New file.
1238 * Makefile.in (SFILES): Add namespace.c.
1239 (COMMON_OBS): Add namespace.o
1241 2015-08-12 Joel Brobecker <brobecker@adacore.com>
1243 * amd64-tdep.c (amd64_displaced_step_fixup): Fix the mask used to
1246 2015-08-12 Keith Seitz <keiths@redhat.com>
1248 * break-catch-throw.c (re_set_exception_catchpoint) Rename
1249 reserved C++ keyword "explicit" to "explicit_loc".
1250 * breakpoint.c (create_overlay_event_breakpoint)
1251 (create_longjmp_master_breakpoint)
1252 (create_std_terminate_master_breakpoint)
1253 (create_exception_master_breakpoint, update_static_tracepoint):
1254 Rename reserved C++ keyword "explicit" to "explicit_loc".
1255 * completer.c (collect_explicit_location_matches)
1256 (explicit_location_completer): Rename reserved C++ keyword
1257 "explicit" to "explicit_loc".
1258 * linespec.c (struct linespec) <explicit>: Rename to "explicit_loc".
1259 (canonicalize_linespec, create_sals_line_offset)
1260 (convert_linespec_to_sals, convert_explicit_location_to_sals)
1261 (event_location_to_sals, decode_objc): Rename reserved C++ keyword
1262 "explicit" to "explicit_loc".
1263 * location.c (struct event_location) <explicit>: Rename to
1265 (initialize_explicit_location, new_explicit_location)
1266 (explicit_location_to_string_internal, explicit_location_to_linespec):
1267 Rename reserved C++ keyword "explicit" to "explicit_loc".
1268 * location.h (explicit_location_to_string)
1269 (explicit_location_to_linespec, initialize_explicit_location)
1270 (new_explicit_location): Rename reserved C++ keyword "explicit"
1272 * mi/mi-cmd-break.c (mi_cmd_break_insert_1): Rename reserved C++
1273 keyword "explicit" to "explicit_loc".
1275 2015-08-12 Keith Seitz <keiths@redhat.com>
1277 * python/python.c (gdbpy_decode_line): Initialize `location' to NULL
1278 and only call decode_line_1 when it is non-NULL.
1280 2015-08-12 Luis Machado <lgustavo@codesourcery.com>
1282 * breakpoint.c (bp_loc_is_permanent): Return 0 when breakpoint
1283 location address is not meaningful.
1284 (breakpoint_address_is_meaningful): Update comment.
1286 2015-08-11 Keith Seitz <keiths@redhat.com>
1288 * NEWS: Mention explicit locations.
1289 * breakpoint.c [LOCATION_HELP_STRING]: New macro.
1290 [BREAK_ARGS_HELP]: Use LOCATION_HELP_STRING.
1291 (_initialize_breakpoint): Update documentation for
1292 "clear", "break", "trace", "strace", "ftrace", and "dprintf".
1294 2015-08-11 Keith Seitz <keiths@redhat.com>
1296 * mi/mi-cmd-break.c (mi_cmd_break_insert_1): Add support for
1297 explicit locations, options "--source", "--function",
1298 "--label", and "--line".
1300 2015-08-11 Keith Seitz <keiths@redhat.com>
1302 * completer.c: Include location.h.
1303 (enum match_type): New enum.
1304 (location_completer): Rename to ...
1305 (linespec_completer): ... this.
1306 (collect_explicit_location_matches, backup_text_ptr)
1307 (explicit_location_completer): New functions.
1308 (location_completer): "New" function; handle linespec
1309 and explicit location completions.
1310 (complete_line_internal): Remove all location completer-specific
1312 * linespec.c (linespec_lexer_lex_keyword, is_ada_operator)
1313 (find_toplevel_char): Export.
1314 (linespec_parse_line_offset): Export.
1315 Issue error if STRING is not numerical.
1316 (gdb_get_linespec_parser_quote_characters): New function.
1317 * linespec.h (linespec_parse_line_offset): Declare.
1318 (get_gdb_linespec_parser_quote_characters): Declare.
1319 (is_ada_operator): Declare.
1320 (find_toplevel_char): Declare.
1321 (linespec_lexer_lex_keyword): Declare.
1322 * location.c (explicit_to_event_location): New function.
1323 (explicit_location_lex_one): New function.
1324 (string_to_explicit_location): New function.
1325 (string_to_event_location): Handle explicit locations.
1326 * location.h (explicit_to_event_location): Declare.
1327 (string_to_explicit_location): Declare.
1329 2015-08-11 Keith Seitz <keiths@redhat.com>
1331 * break-catch-throw.c (re_set_exception_catchpoint): Convert
1332 linespec into explicit location.
1333 * breakpoint.c (create_overlay_breakpoint)
1334 (create_longjmp_master_breakpoint)
1335 (create_std_terminate_master_breakpoint)
1336 (create_exception_master_breakpoint): Convert linespec into explicit
1338 (update_static_tracepoint): Convert linespec into explicit location.
1339 * linespec.c (enum offset_relative_sign, struct line_offset): Move
1341 (struct linespec) <expression, expr_pc, source_filename>
1342 <function_name, label_name, line_offset>: Replace with ...
1343 <explicit>: ... this.
1344 <is_linespec>: New member.
1345 (PARSER_EXPLICIT): New accessor macro.
1346 (undefined_label_error): New function.
1347 (source_file_not_found_error): New function.
1348 (linespec_parse_basic): The parser result is now an explicit location.
1349 Use PARSER_EXPLICIT to access it.
1350 Use undefined_label_error.
1351 (canonicalize_linespec): Convert canonical linespec into explicit
1353 Move string representation of location to explicit_location_to_linespec
1354 and use it and explicit_location_to_string to save string
1355 representations of the canonical location.
1356 (create_sals_line_offset, convert_linespec_to_sals): `ls' contains an
1357 explicit location. Update all references.
1358 (convert_explicit_location_to_sals): New function.
1359 (parse_linespec): Use PARSER_EXPLICIT to access the parser
1360 result's explicit location.
1361 (linespec_state_constructor): Initialize is_linespec.
1362 Use PARSER_EXPLICIT.
1363 (linespec_parser_delete): Use PARSER_EXPLICIT to access the parser's
1365 (event_location_to_sals): For linespec locations, set is_linespec.
1366 Handle explicit locations.
1367 (decode_objc): 'ls' contains an explicit location now. Update all
1369 (symtabs_from_filename): Use source_file_not_found_error.
1370 * location.c (struct event_location.u) <explicit>: New member.
1371 (initialize_explicit_location): New function.
1372 (initialize_event_location): Initialize explicit locations.
1373 (new_explicit_location, get_explicit_location)
1374 (get_explicit_location_const): New functions.
1375 (explicit_to_string_internal): New function; most of contents moved
1376 from canonicalize_linespec.
1377 (explicit_location_to_string): New function.
1378 (explicit_location_to_linespec): New function.
1379 (copy_event_location, delete_event_location)
1380 (event_location_to_string_const, event_location_empty_p): Handle
1382 * location.h (enum offset_relative_sign, struct line_offset): Move
1383 here from linespec.h.
1384 (enum event_location_type): Add EXPLICIT_LOCATION.
1385 (struct explicit_location): New structure.
1386 (explicit_location_to_string): Declare.
1387 (explicit_location_to_linespec): Declare.
1388 (new_explicit_location, get_explicit_locationp
1389 (get_explicit_location_const, initialize_explicit_location): Declare.
1391 2015-08-11 Keith Seitz <keiths@redhat.com>
1393 * break-catch-throw.c (re_set_exception_catchpoint): Convert
1394 linespec for stap probe to probe location.
1395 * breakpoint.c (create_longjmp_master_breakpoint)
1396 (create_exception_master_breakpoint): Likewise.
1397 (break_command_1): Remove local variable `arg_cp'.
1398 Check location type to set appropriate breakpoint ops methods.
1399 (trace_command): Likewise.
1400 * linespec.c (event_location_to_sals): Assert on probe locations.
1401 * location.c (EL_PROBE): Add macro definition.
1402 (new_probe_location, get_probe_location): New functions.
1403 (copy_event_location, delete_event_location, event_location_to_string)
1404 (string_to_event_location, event_location_empty_p): Handle probe
1406 * location.h (enum event_location_type): Add PROBE_LOCATION.
1407 (new_probe_location, get_probe_location): Declare.
1408 * probe.c (parse_probes): Assert that LOCATION is a probe location.
1409 Convert linespec into probe location.
1411 2015-08-11 Keith Seitz <keiths@redhat.com>
1413 * breakpoint.c (create_thread_event_breakpoint, init_breakpoint_sal):
1414 Convert linespec to address location.
1415 * linespec.c (canonicalize_linespec): Do not handle address
1417 (convert_address_location_to_sals): New function; contents moved
1419 (convert_linespc_to_sals): ... here.
1420 (parse_linespec): Remove address locations from linespec grammar.
1421 Remove handling of address locations.
1422 (linespec_lex_to_end): Remove handling of address linespecs.
1423 (event_location_to_sals): Handle ADDRESS_LOCATION.
1424 (linespec_expression_to_pc): Export.
1425 * linespec.h (linespec_expression_to_pc): Add declaration.
1426 * location.c (struct event_location.u) <address>: New member.
1427 (new_address_location, get_address_location): New functions.
1428 (copy_event_location, delete_event_location, event_location_to_string)
1429 (string_to_event_location, event_location_empty_p): Handle address
1431 * location.h (enum event_location_type): Add ADDRESS_LOCATION.
1432 (new_address_location, get_address_location): Declare.
1433 * python/py-finishbreakpoint.c (bpfinishpy_init): Convert linespec
1434 to address location.
1435 * spu-tdep.c (spu_catch_start): Likewise.
1437 2015-08-11 Keith Seitz <keiths@redhat.com>
1439 * ax-gdb.c: Include location.h.
1440 (agent_command_1) Use linespec location instead of address
1442 * break-catch-throw.c: Include location.h.
1443 (re_set_exception_catchpoint): Use linespec locations instead
1445 * breakpoint.c: Include location.h.
1446 (create_overlay_event_breakpoint, create_longjmp_master_breakpoint)
1447 (create_std_terminate_master_breakpoint)
1448 (create_exception_master_breakpoint, update_breakpoints_after_exec):
1449 Use linespec location instead of address string.
1450 (print_breakpoint_location): Use locations and
1451 event_location_to_string.
1452 Print extra_string for pending locations for non-MI streams.
1453 (print_one_breakpoint_location): Use locations and
1454 event_location_to_string.
1455 (init_raw_breakpoint_without_location): Initialize b->location.
1456 (create_thread_event_breakpoint): Use linespec location instead of
1458 (init_breakpoint_sal): Likewise.
1459 Only save extra_string if it is non-NULL and not the empty string.
1460 Use event_location_to_string instead of `addr_string'.
1461 Constify `p' and `endp'.
1462 Use skip_spaces_const/skip_space_const instead of non-const versions.
1463 Copy the location into the breakpoint.
1464 If LOCATION is NULL, save the breakpoint address as a linespec location
1465 instead of an address string.
1466 (create_breakpoint_sal): Change `addr_string' parameter to a struct
1467 event_location. All uses updated.
1468 (create_breakpoints_sal): Likewise for local variable `addr_string'.
1469 (parse_breakpoint_sals): Use locations instead of address strings.
1470 Remove check for empty linespec with conditional.
1472 (decode_static_tracepoint_spec): Make argument const and update
1474 (create_breakpoint): Change `arg' to a struct event_location and
1476 Remove `copy_arg' and `addr_start'.
1477 If EXTRA_STRING is empty, set it to NULL.
1478 Don't populate `canonical' for pending breakpoints.
1479 Pass `extra_string' to find_condition_and_thread.
1480 Clear `extra_string' if `rest' was NULL.
1481 Do not error with "garbage after location" if setting a dprintf
1483 Copy the location into the breakpoint instead of an address string.
1484 (break_command_1): Use string_to_event_location and pass this to
1485 create_breakpoint instead of an address string.
1486 Check against `arg_cp' for a probe linespec.
1487 (dprintf_command): Use string_to_event_location and pass this to
1488 create_breakpoint instead of an address string.
1489 Throw an exception if no format string was specified.
1490 (print_recreate_ranged_breakpoint): Use event_location_to_string
1491 instead of address strings.
1492 (break_range_command, until_break_command)
1493 (init_ada_exception_breakpoint): Use locations instead
1495 (say_where): Print out extra_string for pending locations.
1496 (base_breakpoint_dtor): Delete `location' and `location_range_end' of
1498 (base_breakpoint_create_sals_from_location): Use struct event_location
1499 instead of address string.
1500 Remove `addr_start' and `copy_arg' parameters.
1501 (base_breakpoint_decode_location): Use struct event_location instead of
1503 (bkpt_re_set): Use locations instead of address strings.
1504 Use event_location_empty_p to check for unset location.
1505 (bkpt_print_recreate): Use event_location_to_string instead of
1507 Print out extra_string for pending locations.
1508 (bkpt_create_sals_from_location, bkpt_decode_location)
1509 (bkpt_probe_create_sals_from_location): Use struct event_location
1510 instead of address string.
1511 (bkpt_probe_decode_location): Use struct event_location instead of
1513 (tracepoint_print_recreate): Use event_location_to_string to
1514 recreate the tracepoint.
1515 (tracepoint_create_sals_from_location, tracepoint_decode_location)
1516 (tracepoint_probe_create_sals_from_location)
1517 (tracepoint_probe_decode_location): Use struct event_location
1518 instead of address string.
1519 (dprintf_print_recreate): Use event_location_to_string to recreate
1521 (dprintf_re_set): Remove check for valid/missing format string.
1522 (strace_marker_create_sals_from_location)
1523 (strace_marker_create_breakpoints_sal, strace_marker_decode_location)
1524 (update_static_tracepoint): Use struct event_location instead of
1526 (location_to_sals): Likewise.
1527 Pass `extra_string' to find_condition_and_thread.
1528 For newly resolved pending breakpoint locations, clear the location's
1529 string representation.
1530 Assert that the breakpoint's condition string is NULL when
1531 condition_not_parsed.
1532 (breakpoint_re_set_default, create_sals_from_location_default)
1533 (decode_location_default, trace_command, ftrace_command)
1534 (strace_command, create_tracepoint_from_upload): Use locations
1535 instead of address strings.
1536 * breakpoint.h (struct breakpoint_ops) <create_sals_from_location>:
1537 Use struct event_location instead of address string.
1539 <decode_location>: Likewise.
1540 (struct breakpoint) <addr_string>: Change to struct event_location
1541 and rename `location'.
1542 <addr_string_range_end>: Change to struct event_location and rename
1543 `location_range_end'.
1544 (create_breakpoint): Use struct event_location instead of address
1546 * cli/cli-cmds.c: Include location.h.
1547 (edit_command, list_command): Use locations instead of address strings.
1548 * elfread.c: Include location.h.
1549 (elf_gnu_ifunc_resolver_return_stop): Use event_location_to_string.
1550 * guile/scm-breakpoint.c: Include location.h.
1551 (bpscm_print_breakpoint_smob): Use event_location_to_string.
1552 (gdbscm_register_breakpoint): Use locations instead of address
1554 * linespec.c: Include location.h.
1555 (struct ls_parser) <stream>: Change to const char *.
1556 (PARSER_STREAM): Update.
1557 (lionespec_lexer_lex_keyword): According to find_condition_and_thread,
1558 keywords must be followed by whitespace.
1559 (canonicalize_linespec): Save a linespec location into `canonical'.
1560 Save a canonical linespec into `canonical'.
1561 (parse_linespec): Change `argptr' to const char * and rename `arg'.
1563 Update function description.
1564 (linespec_parser_new): Initialize `parser'.
1565 Update initialization of parsing stream.
1566 (event_location_to_sals): New function.
1567 (decode_line_full): Change `argptr' to a struct event_location and
1568 rename it `location'.
1569 Use locations instead of address strings.
1570 Call event_location_to_sals instead of parse_linespec.
1571 (decode_line_1): Likewise.
1572 (decode_line_with_current_source, decode_line_with_last_displayed)
1573 Use locations instead of address strings.
1574 (decode_objc): Likewise.
1575 Change `argptr' to const char * and rename `arg'.
1576 (destroy_linespec_result): Delete the linespec result's location
1577 instead of freeing the address string.
1578 * linespec.h (struct linespec_result) <addr_string>: Change to
1579 struct event_location and rename to ...
1580 <location>: ... this.
1581 (decode_line_1, decode_line_full): Change `argptr' to struct
1582 event_location. All callers updated.
1583 * mi/mi-cmd-break.c: Include language.h, location.h, and linespec.h.
1584 (mi_cmd_break_insert_1): Use locations instead of address strings.
1585 Throw an error if there was "garbage" at the end of the specified
1587 * probe.c: Include location.h.
1588 (parse_probes): Change `argptr' to struct event_location.
1589 Use event locations instead of address strings.
1590 * probe.h (parse_probes): Change `argptr' to struct event_location.
1591 * python/py-breakpoint.c: Include location.h.
1592 (bppy_get_location): Constify local variable `str'.
1593 Use event_location_to_string.
1594 (bppy_init): Use locations instead of address strings.
1595 * python/py-finishbreakpoint.c: Include location.h.
1596 (bpfinishpy_init): Remove local variable `addr_str'.
1597 Use locations instead of address strings.
1598 * python/python.c: Include location.h.
1599 (gdbpy_decode_line): Use locations instead of address strings.
1600 * remote.c: Include location.h.
1601 (remote_download_tracepoint): Use locations instead of address
1603 * spu-tdep.c: Include location.h.
1604 (spu_catch_start): Remove local variable `buf'.
1605 Use locations instead of address strings.
1606 * tracepoint.c: Include location.h.
1607 (scope_info): Use locations instead of address strings.
1608 (encode_source_string): Constify parameter `src'.
1609 * tracepoint.h (encode_source_string): Likewise.
1611 2015-08-11 Keith Seitz <keiths@redhat.com>
1613 * Makefile.in (SFILES): Add location.c.
1614 (HFILES_NO_SRCDIR): Add location.h.
1615 (COMMON_OBS): Add location.o.
1616 * linespec.c (linespec_lex_to_end): New function.
1617 * linespec.h (linespec_lex_to_end): Declare.
1618 * location.c: New file.
1619 * location.h: New file.
1621 2015-08-11 Keith Seitz <keiths@redhat.com>
1623 * breakpoint.h (struct breakpoint_ops) <create_sals_from_address>:
1624 Renamed to create_sals_from_location.
1625 <decode_linespec>: Renamed to decode_location.
1627 * breakpoint.c (create_sals_from_address_default): Renamed to ...
1628 (create_sals_from_location_default): ... this.
1629 (addr_string_to_sals): Renamed to ...
1630 (location_to_sals): ... this.
1631 (decode_linespec_default): Renamed to ...
1632 (decode_location_default): ... this.
1633 (base_breakpoint_create_sals_from_address): Renamed to ...
1634 (base_breakpoint_create_sals_from_location): ... this.
1635 (bkpt_create_sals_from_address): Renamed to ...
1636 (bkpt_create_sals_from_location): ... this.
1637 (bkpt_decode_linespec): Renamed to ...
1638 (bkpt_decode_location): ... this.
1639 (bkpt_probe_create_sals_from_address): Renamed to ...
1640 (bkpt_probe_create_sals_from_location): ... this.
1641 (tracepoint_create_sals_from_address): Renamed to ...
1642 (tracepoint_create_sals_from_location): ... this.
1643 (tracepoint_decode_linespec): Renamed to ...
1644 (tracepoint_decode_location): ... this.
1645 (tracepoint_probe_create_sals_from_address): Renamed to ...
1646 (tracepoint_probe_create_sals_from_location): ... this.
1647 (tracepoint_probe_decode_linespec): Renamed to ...
1648 (tracepoint_probe_decode_location): ... this.
1649 (strace_marker_create_sals_from_address): Renamed to ...
1650 (strace_marker_create_sals_from_location): ... this.
1651 (decode_linespec_default): Renamed to ...
1652 (decode_location_default): ... this.
1654 2015-08-10 Doug Evans <dje@google.com>
1655 Keith Seitz <keiths@redhat.com>
1658 * symtab.c (make_file_symbol_completion_list_1): Renamed from
1659 make_file_symbol_completion_list and made static.
1660 (make_file_symbol_completion_list): New function.
1662 2015-08-10 Joel Brobecker <brobecker@adacore.com>
1664 * infrun.c (follow_fork, displaced_step_prepare, resume): Remove
1665 trailing new-line at end of warning message.
1666 (proceed): Add i18n marker to error messages.
1668 2015-08-07 Pedro Alves <palves@redhat.com>
1670 * linux-nat.c (linux_nat_always_non_stop_p): Return 1.
1672 2015-08-07 Pedro Alves <palves@redhat.com>
1674 * s390-linux-tdep.c (is_non_branch_ril)
1675 (s390_displaced_step_copy_insn): New functions.
1676 (s390_displaced_step_fixup): Update comment.
1677 (s390_gdbarch_init): Install s390_displaced_step_copy_insn as
1678 gdbarch_displaced_step_copy_insn hook.
1680 2015-08-07 Pedro Alves <palves@redhat.com>
1682 * infrun.c (displaced_step_prepare_throw): Return -1 if
1683 gdbarch_displaced_step_copy_insn returns NULL. Update intro
1685 * rs6000-tdep.c (LWARX_MASK, LWARX_INSTRUCTION, LDARX_INSTRUCTION)
1686 (STWCX_MASK, STWCX_INSTRUCTION, STDCX_INSTRUCTION): Move higher up
1688 (ppc_displaced_step_copy_insn): New function.
1689 (ppc_displaced_step_fixup): Update comment.
1690 (rs6000_gdbarch_init): Install ppc_displaced_step_copy_insn as
1691 gdbarch_displaced_step_copy_insn hook.
1692 * gdbarch.sh (displaced_step_copy_insn): Document what happens on
1694 * gdbarch.h: Regenerate.
1696 2015-08-07 Pedro Alves <palves@redhat.com>
1698 * inferior.h (struct inferior) <displaced_stepping_failed>: New
1700 * infrun.c (use_displaced_stepping_now_p): New parameter 'inf'.
1701 Return false if dispaced stepping failed before.
1702 (resume): Pass the current inferior to
1703 use_displaced_stepping_now_p. Wrap displaced_step_prepare in
1704 TRY/CATCH. If we get a MEMORY_ERROR, set the inferior's
1705 displaced_stepping_failed flag, and fall back to an in-line
1708 2015-08-07 Pedro Alves <palves@redhat.com>
1710 * darwin-nat.c (darwin_stop): Rename to ...
1711 (darwin_interrupt): ... this.
1712 (_initialize_darwin_inferior): Adjust.
1713 * gnu-nat.c (gnu_stop): Delete.
1714 (gnu_target): Don't install gnu_stop.
1715 * inf-ptrace.c (inf_ptrace_stop): Rename to ...
1716 (inf_ptrace_interrupt): ... this.
1717 (inf_ptrace_target): Adjust.
1718 * infcmd.c (interrupt_target_1): Use target_interrupt instead of
1720 * linux-nat (linux_nat_stop): Rename to ...
1721 (linux_nat_interrupt): ... this.
1722 (linux_nat_stop): Reimplement.
1723 (linux_nat_add_target): Install linux_nat_interrupt.
1724 * nto-procfs.c (nto_interrupt_twice): Rename to ...
1725 (nto_handle_sigint_twice): ... this.
1726 (nto_interrupt): Rename to ...
1727 (nto_handle_sigint): ... this. Call target_interrupt instead of
1729 (procfs_wait): Adjust.
1730 (procfs_stop): Rename to ...
1731 (procfs_interrupt): ... this.
1732 (init_procfs_targets): Adjust.
1733 * procfs.c (procfs_stop): Rename to ...
1734 (procfs_interrupt): ... this.
1735 (procfs_target): Adjust.
1736 * remote-m32r-sdi.c (m32r_stop): Rename to ...
1737 (m32r_interrupt): ... this.
1738 (init_m32r_ops): Adjust.
1739 * remote-sim.c (gdbsim_stop_inferior): Rename to ...
1740 (gdbsim_interrupt_inferior): ... this.
1741 (gdbsim_stop): Rename to ...
1742 (gdbsim_interrupt): ... this.
1743 (gdbsim_cntrl_c): Adjust.
1744 (init_gdbsim_ops): Adjust.
1745 * remote.c (sync_remote_interrupt): Adjust comments.
1746 (remote_stop_as): Rename to ...
1747 (remote_interrupt_as): ... this.
1748 (remote_stop): Adjust comment.
1749 (remote_interrupt): New function.
1750 (init_remote_ops): Install remote_interrupt.
1751 * target.c (target_interrupt): New function.
1752 * target.h (struct target_ops) <to_interrupt>: New field.
1753 (target_interrupt): New declaration.
1754 * windows-nat.c (windows_stop): Rename to ...
1755 (windows_interrupt): ... this.
1756 * target-delegates.c: Regenerate.
1758 2015-08-07 Pedro Alves <palves@redhat.com>
1760 * signal-while-stepping-over-bp-other-thread.exp: Expect "restart
1761 threads" as alternative to "switching back to stepped thread".
1763 2015-08-07 Pedro Alves <palves@redhat.com>
1765 * NEWS: Mention "maint set/show target-non-stop".
1766 * breakpoint.c (update_global_location_list): Check
1767 target_is_non_stop_p instead of non_stop.
1768 * infcmd.c (attach_command_post_wait, attach_command): Likewise.
1769 * infrun.c (show_can_use_displaced_stepping)
1770 (can_use_displaced_stepping_p, start_step_over_inferior):
1772 (internal_resume_ptid): New function.
1774 (proceed): Check target_is_non_stop_p instead of non_stop. If in
1775 all-stop mode but the target is always in non-stop mode, start all
1776 the other threads that are implicitly resumed too.
1777 (for_each_just_stopped_thread, fetch_inferior_event)
1778 (adjust_pc_after_break, stop_all_threads): Check
1779 target_is_non_stop_p instead of non_stop.
1780 (handle_inferior_event): Likewise. Handle detach-fork in all-stop
1781 with the target always in non-stop mode.
1782 (handle_signal_stop) <random signal>: Check target_is_non_stop_p
1783 instead of non_stop.
1784 (switch_back_to_stepped_thread): Check target_is_non_stop_p
1785 instead of non_stop.
1786 (keep_going_stepped_thread): Use internal_resume_ptid.
1787 (stop_waiting): If in all-stop mode, and the target is in non-stop
1788 mode, stop all threads.
1789 (keep_going_pass): Likewise, when starting a new in-line step-over
1791 * linux-nat.c (get_pending_status, select_event_lwp)
1792 (linux_nat_filter_event, linux_nat_wait_1, linux_nat_wait): Check
1793 target_is_non_stop_p instead of non_stop.
1794 (linux_nat_always_non_stop_p): New function.
1795 (linux_nat_stop): Check target_is_non_stop_p instead of non_stop.
1796 (linux_nat_add_target): Install linux_nat_always_non_stop_p.
1797 * target-delegates.c: Regenerate.
1798 * target.c (target_is_non_stop_p): New function.
1799 (target_non_stop_enabled, target_non_stop_enabled_1): New globals.
1800 (maint_set_target_non_stop_command)
1801 (maint_show_target_non_stop_command): New functions.
1802 (_initilize_target): Install "maint set/show target-non-stop"
1804 * target.h (struct target_ops) <to_always_non_stop_p>: New field.
1805 (target_non_stop_enabled): New declaration.
1806 (target_is_non_stop_p): New declaration.
1808 2015-08-07 Pedro Alves <pedro@codesourcery.com>
1810 * breakpoint.c (breakpoints_should_be_inserted_now): If any thread
1811 has a pending status, return true.
1812 * gdbthread.h: Include target/waitstatus.h.
1813 (struct thread_suspend_state) <stop_reason, waitstatus_pending_p,
1814 stop_pc>: New fields.
1815 (struct thread_info) <resumed>: New field.
1816 (set_resumed): Declare.
1817 * infrun.c: Include "event-loop.h".
1818 (infrun_async_inferior_event_token, infrun_is_async): New globals.
1819 (infrun_async): New function.
1820 (clear_step_over_info): Add debug output.
1821 (displaced_step_in_progress_any_inferior): New function.
1822 (displaced_step_fixup): New returns int.
1823 (start_step_over): Handle in-line step-overs too. Assert the
1824 thread is marked resumed.
1825 (resume_cleanups): Clear the thread's resumed flag.
1826 (resume): Set the thread's resumed flag. Return early if the
1827 thread has a pending status. Allow stepping a breakpoint with no
1829 (proceed): Adjust to check 'resumed' instead of 'executing'.
1830 (clear_proceed_status_thread): If the thread has a pending status,
1831 and that status is a finished step, discard the pending status.
1832 (clear_proceed_status): Don't clear step_over_info here.
1833 (random_pending_event_thread, do_target_wait): New functions.
1834 (prepare_for_detach, wait_for_inferior, fetch_inferior_event): Use
1836 (wait_one): New function.
1837 (THREAD_STOPPED_BY): New macro.
1838 (thread_stopped_by_watchpoint, thread_stopped_by_sw_breakpoint)
1839 (thread_stopped_by_hw_breakpoint): New functions.
1840 (switch_to_thread_cleanup, save_waitstatus, stop_all_threads): New
1842 (handle_inferior_event): Also call set_resumed(false) on all
1843 threads implicitly stopped by the event.
1844 (restart_threads, resumed_thread_with_pending_status): New
1846 (finish_step_over): If we were doing an in-line step-over before,
1847 and no longer are after trying to start a new step-over, restart
1848 all threads. If we have multiple threads with pending events,
1849 save the current event and go through the event loop again.
1850 (handle_signal_stop): Return early if finish_step_over returns
1852 <random signal>: If we get a signal while stepping over a
1853 breakpoint in-line in non-stop mode, restart all threads. Clear
1854 step_over_info before delivering the signal.
1855 (keep_going_stepped_thread): Use internal_error instead of
1856 gdb_assert. Mark the thread as resumed.
1857 (keep_going_pass_signal): Assert the thread isn't already resumed.
1858 If some other thread is doing an in-line step-over, defer the
1859 resume. If we just started a new in-line step-over, stop all
1860 threads. Don't clear step_over_info.
1861 (infrun_async_inferior_event_handler): New function.
1862 (_initialize_infrun): Create async event handler with
1863 infrun_async_inferior_event_handler as callback.
1864 (infrun_async): New declaration.
1865 * target.c (target_async): New function.
1866 * target.h (target_async): Declare macro and readd as function
1868 * target/waitstatus.h (enum target_stop_reason)
1869 <TARGET_STOPPED_BY_SINGLE_STEP>: New value.
1870 * thread.c (new_thread): Clear the new waitstatus field.
1871 (set_resumed): New function.
1873 2015-08-07 Pedro Alves <palves@redhat.com>
1875 * infrun.c (keep_going_stepped_thread): New function, factored out
1877 (switch_back_to_stepped_thread): ... here.
1879 2015-08-07 Pedro Alves <palves@redhat.com>
1881 * infrun.c (currently_stepping): Extend intro comment.
1882 * target.h (target_resume): Extend intro comment.
1884 2015-08-07 Pedro Alves <palves@redhat.com>
1886 * infrun.c (switch_back_to_stepped_thread): Use ecs->ptid instead
1887 of inferior_ptid. If the stepped thread vanished, return 0
1888 instead of resuming here. Use reset_ecs. Print the prev_pc and
1889 the current stop_pc in log message. Clear trap_expected if the
1890 thread advanced. Don't pass currently_stepping to
1893 2015-08-07 Pedro Alves <palves@redhat.com>
1895 * gdbthread.h (struct thread_info) <prev_pc>: Extend comment.
1896 * infrun.c (struct execution_control_state): Move higher up in the
1898 (reset_ecs): New function.
1899 (start_step_over): Now returns int. Rewrite to use
1900 keep_going_pass_signal instead of manually starting a displaced step.
1901 (resume): Don't call set_running here. If displaced stepping
1902 can't start now, clear trap_expected.
1903 (find_thread_needs_step_over): Delete function.
1904 (proceed): Set up finish_thread_state_cleanup. Call set_running.
1905 If the current thread needs a step over, push it in the step-over
1906 chain. Don't set insert breakpoints nor call resume directly
1907 here. Instead rewrite to use start_step_over and
1908 keep_going_pass_signal.
1909 (finish_step_over): New function.
1910 (handle_signal_stop): Call finish_step_over instead of
1912 (switch_back_to_stepped_thread): If the event thread needs another
1913 step-over do that first. Use start_step_over.
1914 (keep_going_pass_signal): New function, factored out from ...
1915 (keep_going): ... here.
1916 (_initialize_infrun): Comment moved here.
1917 * thread.c (set_running_thread): New function.
1918 (set_running, finish_thread_state): Use set_running_thread.
1920 2015-08-07 Pedro Alves <palves@redhat.com>
1922 * gdbthread.h (struct thread_info) <step_over_prev,
1923 step_over_next>: New fields.
1924 (thread_step_over_chain_enqueue, thread_step_over_chain_remove)
1925 (thread_step_over_chain_next, thread_is_in_step_over_chain): New
1927 * infrun.c (struct displaced_step_request): Delete.
1928 (struct displaced_step_inferior_state) <step_request_queue>:
1930 (displaced_step_prepare): Assert that trap_expected is set. Use
1931 thread_step_over_chain_enqueue. Split starting a new displaced
1933 (start_step_over): ... this new function.
1934 (resume): Assert the thread isn't waiting for a step over already.
1935 (proceed): Assert the thread isn't waiting for a step over
1937 (infrun_thread_stop_requested): Adjust to remove threads from the
1938 embedded step-over chain.
1939 (handle_inferior_event) <fork/vfork>: Call start_step_over after
1940 displaced_step_fixup.
1941 (handle_signal_stop): Call start_step_over after
1942 displaced_step_fixup.
1943 * infrun.h (step_over_queue_head): New declaration.
1944 * thread.c (step_over_chain_enqueue, step_over_chain_remove)
1945 (thread_step_over_chain_next, thread_is_in_step_over_chain)
1946 (thread_step_over_chain_enqueue)
1947 (thread_step_over_chain_remove): New functions.
1948 (delete_thread_1): Remove thread from the step-over chain.
1950 2015-08-07 Pedro Alves <palves@redhat.com>
1952 * infrun.c (thread_still_needs_step_over): Rename to ...
1953 (thread_still_needs_step_over_bp): ... this.
1954 (enum step_over_what): New.
1955 (thread_still_needs_step_over): Reimplement.
1957 2015-08-07 Pedro Alves <palves@redhat.com>
1959 * remote.c (remote_wait_as): If not waiting for a stop reply,
1960 return TARGET_WAITKIND_NO_RESUMED. If TARGET_WNOHANG is
1961 requested, don't block waiting forever.
1963 2015-08-07 Pedro Alves <pedro@codesourcery.com>
1965 * infrun.c (adjust_pc_after_break): Now takes thread_info and
1966 waitstatus pointers instead of an ecs. Adjust.
1967 (handle_inferior_event): Adjust caller.
1969 2015-08-07 Pedro Alves <palves@redhat.com>
1971 * infrun.c (handle_inferior_event): If we get
1972 TARGET_WAITKIND_SIGNALLED or TARGET_WAITKIND_EXITED in non-stop
1973 mode, mark all threads of the exiting process as not-executing.
1974 (normal_stop): If we get TARGET_WAITKIND_SIGNALLED or
1975 TARGET_WAITKIND_EXITED in non-stop mode, finish all threads of the
1976 exiting process, if inferior_ptid still points at a process.
1977 * thread.c (struct current_thread_cleanup) <next>: New field.
1978 (current_thread_cleanup_chain): New global.
1979 (restore_current_thread_ptid_changed): New function.
1980 (restore_current_thread_cleanup_dtor): Remove the cleanup from the
1981 current_thread_cleanup_chain list.
1982 (make_cleanup_restore_current_thread): Add the cleanup data to the
1983 current_thread_cleanup_chain list.
1984 (_initialize_thread): Install restore_current_thread_ptid_changed
1985 as thread_ptid_changed observer.
1987 2015-08-07 Joel Brobecker <brobecker@adacore.com>
1989 * dtrace-probe.c (dtrace_process_dof): Ignore the objfile's DOF
1990 data if a DTRACE_DOF_SECT_TYPE_PROVIDER section is found to be
1991 smaller than expected.
1993 2015-08-07 Andrew Burgess <andrew.burgess@embecosm.com>
1995 * stack.c (get_frame_language): Moved ...
1996 * frame.c (get_frame_language): ... to here.
1997 * language.h (get_frame_language): Declaration moved to frame.h.
1998 * frame.h: Add language.h include, for language enum.
1999 (get_frame_language): Declaration moved from language.h.
2000 * language.c: Add frame.h include.
2001 * top.c: Add frame.h include.
2002 * symtab.h (struct obj_section): Declare.
2003 (struct cmd_list_element): Declare.
2005 2015-08-07 Andrew Burgess <andrew.burgess@embecosm.com>
2007 * language.c (show_language_command): Find selected frame before
2008 asking for the language of that frame.
2009 (set_language_command): Likewise.
2010 * language.h (get_frame_language): Add frame parameter.
2011 * stack.c (get_frame_language): Add frame parameter, assert
2012 parameter is not NULL, update comment and reindent.
2013 * top.c (check_frame_language_change): Pass the selected frame
2014 into get_frame_language.
2016 2015-08-07 Markus Metzger <markus.t.metzger@intel.com>
2018 * btrace.c (btrace_compute_ftrace_bts): Clear insn flags.
2019 (pt_btrace_insn_flags): New.
2020 (ftrace_add_pt): Call pt_btrace_insn_flags.
2021 * btrace.h (btrace_insn_flag): New.
2022 (btrace_insn) <flags>: New.
2023 * record-btrace.c (btrace_insn_history): Print insn prefix.
2024 * NEWS: Announce it.
2026 2015-08-07 Markus Metzger <markus.t.metzger@intel.com>
2028 * configure.ac: Check for PERF_ATTR_SIZE_VER5 in linux/perf_event.h
2029 * configure: Regenerate.
2031 2015-08-06 Yaakov Selkowitz <yselkowi@redhat.com>
2033 * Makefile.in (LIBICONV): Define.
2034 (CLIBS): Add LIBICONV.
2035 * acinclude.m4: Use config/iconv.m4 instead of custom AM_ICONV.
2036 * configure: Regenerate.
2038 2015-08-06 Simon Marchi <simon.marchi@ericsson.com>
2039 Pedro Alves <palves@redhat.com>
2041 * arm-tdep.c (set_fp_model_sfunc): Add cast from integer to enum.
2042 (arm_set_abi): Likewise.
2043 * ax-general.c (ax_print): Likewise.
2044 * c-exp.y (exp : string_exp): Likewise.
2045 * compile/compile-loc2c.c (compute_stack_depth_worker): Likewise.
2046 (do_compile_dwarf_expr_to_c): Likewise.
2047 * cp-name-parser.y (demangler_special : DEMANGLER_SPECIAL start):
2049 * dwarf2expr.c (execute_stack_op): Likewise.
2050 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise.
2051 (disassemble_dwarf_expression): Likewise.
2052 * dwarf2read.c (dwarf2_add_member_fn): Likewise.
2053 (read_array_order): Likewise.
2054 (abbrev_table_read_table): Likewise.
2055 (read_attribute_value): Likewise.
2056 (skip_unknown_opcode): Likewise.
2057 (dwarf_decode_macro_bytes): Likewise.
2058 (dwarf_decode_macros): Likewise.
2059 * eval.c (value_f90_subarray): Likewise.
2060 * guile/scm-param.c (gdbscm_make_parameter): Likewise.
2061 * i386-linux-tdep.c (i386_canonicalize_syscall): Likewise.
2062 * infrun.c (handle_command): Likewise.
2063 * memory-map.c (memory_map_start_memory): Likewise.
2064 * osabi.c (set_osabi): Likewise.
2065 * parse.c (operator_length_standard): Likewise.
2066 * ppc-linux-tdep.c (ppc_canonicalize_syscall): Likewise, and use
2067 single return point.
2068 * python/py-frame.c (gdbpy_frame_stop_reason_string): Likewise.
2069 * python/py-symbol.c (gdbpy_lookup_symbol): Likewise.
2070 (gdbpy_lookup_global_symbol): Likewise.
2071 * record-full.c (record_full_restore): Likewise.
2072 * regcache.c (regcache_register_status): Likewise.
2073 (regcache_raw_read): Likewise.
2074 (regcache_cooked_read): Likewise.
2075 * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
2076 * symtab.c (initialize_ordinary_address_classes): Likewise.
2077 * target-debug.h (target_debug_print_signals): Likewise.
2078 * utils.c (do_restore_current_language): Likewise.
2080 2015-08-06 Clem Dickey <clemd@acm.org>
2083 * python/lib/gdb/command/type_printers.py (InfoTypePrinter): Fix typo.
2085 2015-08-06 Simon Marchi <simon.marchi@ericsson.com>
2087 * complaints.c (enum complaint_series): Add newlines and remove
2088 out of date comment.
2089 (struct complaints) <series>: Change type to enum
2090 complaint_series and remove out of date comment.
2091 (symfile_complaint_hook): Use equivalent enum value
2092 ISOLATED_MESSAGE instead of 0.
2094 2015-08-06 Pedro Alves <palves@redhat.com>
2096 * nat/linux-waitpid.c (my_waitpid): Only print *status if waitpid
2099 2015-08-06 Pierre Langlois <pierre.langlois@arm.com>
2101 * common/agent.c (symbol_list) <required>: Remove.
2103 2015-08-06 Pedro Alves <palves@redhat.com>
2105 * target/waitstatus.h (enum target_stop_reason)
2106 <TARGET_STOPPED_BY_SINGLE_STEP>: New value.
2108 2015-08-05 Pedro Alves <palves@redhat.com>
2109 Joel Brobecker <brobecker@adacore.com>
2111 * breakpoint.c (bpstat_what) <bp_longjmp, bp_longjmp_call_dummy>
2112 <bp_exception, bp_longjmp_resume, bp_exception_resume>: Handle the
2113 case where BS->STOP is not set.
2115 2015-08-05 Ulrich Weigand <uweigand@de.ibm.com>
2117 * nat/gdb_thread_db.h: Add copyright header.
2118 Protect against multiple inclusion.
2120 2015-08-05 Yao Qi <yao.qi@linaro.org>
2122 * aarch64-linux-nat.c (get_thread_id): Remove.
2123 (debug_reg_change_callback): Call ptid_get_lwp instead of
2125 (fetch_gregs_from_thread): Likewise.
2126 (store_gregs_to_thread): Likewise.
2127 (fetch_fpregs_from_thread): Likewise.
2128 (store_fpregs_to_thread): Likewise.
2129 (aarch64_linux_get_debug_reg_capacity): Likewise.
2130 * arm-linux-nat.c (get_thread_id): Remove.
2131 (GET_THREAD_ID): Update macro to use ptid_get_lwp.
2132 * xtensa-linux-nat.c (get_thread_id): Remove.
2133 (GET_THREAD_ID): Update macro to use ptid_get_lwp.
2134 * arm-linux-nat.c (get_thread_id): Remove.
2135 (GET_THREAD_ID): Remove.
2136 (fetch_fpregs): Call ptid_get_lwp instead of GET_THREAD_ID.
2137 (store_fpregs, fetch_regs, store_regs): Likewise.
2138 (fetch_wmmx_regs, store_wmmx_regs): Likewise.
2139 (fetch_vfp_regs, store_vfp_regs): Likewise.
2140 (arm_linux_read_description): Likewise.
2141 (arm_linux_get_hwbp_cap): Likewise.
2142 * xtensa-linux-nat.c (get_thread_id): Remove.
2143 (GET_THREAD_ID): Remove.
2144 (fetch_gregs, store_gregs): Call ptid_get_lwp instead of
2147 2015-08-04 Ciro Santilli <ciro.santilli@gmail.com> (obvious patch)
2149 * python/py-linetable.c: Fix case of Linetable to LineTable
2150 in docstrings and code comments.
2151 * python/py-symtab.c: Same.
2153 2015-08-04 Jan Kratochvil <jan.kratochvil@redhat.com>
2155 * infcmd.c (signal_command): Call do_cleanups for args_chain.
2157 2015-08-04 Jan Kratochvil <jan.kratochvil@redhat.com>
2160 * infcmd.c (attach_command): Move ARGS_CHAIN cleanup after last ARGS
2163 2015-08-04 Pedro Alves <palves@redhat.com>
2165 * nat/gdb_thread_db.h (td_init_ftype, td_ta_new_ftype)
2166 (td_ta_map_lwp2thr_ftype, td_ta_thr_iter_ftype)
2167 (td_ta_event_addr_ftype, td_ta_set_event_ftype)
2168 (td_ta_clear_event_ftype, td_ta_event_getmsg_ftype)
2169 (td_thr_validate_ftype, td_thr_get_info_ftype)
2170 (td_thr_event_enable_ftype, td_thr_tls_get_addr_ftype)
2171 (td_thr_tlsbase_ftype, td_symbol_list_ftype, td_ta_delete_ftype):
2173 * linux-thread-db.c (struct thread_db_info): Use new typedefs.
2174 (try_thread_db_load_1): Define TDB_VERBOSE_DLSYM, TDB_DLSYM , CHK
2175 local macros and use them instead of verbose_dlsym and dlsym
2178 2015-08-03 Sandra Loosemore <sandra@codesourcery.com>
2180 * nios2-tdep.h: Include opcode/nios2.h here.
2181 (NIOS2_CDX_OPCODE_SIZE): New.
2182 (struct gdbarch_tdep): Add OP parameter to syscall_next_pc.
2183 * nios2-tdep.c: Don't include opcode/nios2.h here.
2184 (nios2_fetch_insn): For R2, try reading 2-byte instruction if
2186 (nios2_match_add, nios2_match_sub): Add cases for R2 encodings.
2187 (nios2_match_addi, nios2_match_orhi): Likewise.
2188 (nios2_match_stw, nios2_match_ldw): Likewise.
2189 (nios2_match_rdctl): Likewise.
2190 (nios2_match_stwm, nios2_match_ldwm): New.
2191 (nios2_match_branch): Add cases for R2 encodings.
2192 (nios2_match_jmpi, nios2_match_calli): Likewise.
2193 (nios2_match_jmpr, nios2_match_callr): Likewise.
2194 (nios2_match_break, nios2_match_trap): Likewise.
2195 (nios2_in_epilogue_p): Add R2 support.
2196 (nios2_analyze_prologue): Update comments. Recognize R2 CDX
2198 (nios2_breakpoint_from_pc): Handle R2 instructions.
2199 (nios2_get_next_pc): Likewise. Adjust call to
2200 tdep->syscall_next_pc.
2201 * nios2-linux-tdep.c (nios2_r1_linux_rt_sigreturn_tramp_frame):
2202 Renamed from nios2_linux_rt_sigreturn_tramp_frame. Use
2203 instruction field macros instead of literal hex values.
2204 (nios2_r2_linux_rt_sigreturn_tramp_frame): New.
2205 (nios2_linux_syscall_next_pc): Adjust signature to pass OP.
2206 Use size field from OP instead of assuming all instructions
2208 (nios2_linux_init_abi): Register appropriate unwinder for mach.
2210 2015-08-03 Ulrich Weigand <uweigand@de.ibm.com>
2212 * cp-namespace.c (cp_lookup_symbol_via_imports): Fix uninitialized
2213 variable warning with some compilers.
2215 2015-08-03 Yao Qi <yao.qi@linaro.org>
2217 * arm-linux-nat.c (arm_linux_get_hwbp_type): Capitalize "type"
2218 in comment. Replace "rw" with "type".
2219 (arm_linux_remove_watchpoint): Change type of "rw" to
2220 "enum target_hw_bp_type".
2222 2015-08-02 Pierre-Marie de Rodat <derodat@adacore.com>
2224 * alpha-mdebug-tdep.c (find_proc_desc): Update call to
2226 * ft32-tdep.c (ft32_skip_prologue): Likewise.
2227 * moxie-tdep.c (moxie_skip_prologue): Likewise.
2228 * mt-tdep.c (mt_skip_prologue): Likewise.
2229 * xstormy16-tdep.c (xstormy16_skip_prologue): Likewise.
2231 2015-08-01 Pierre-Marie de Rodat <derodat@adacore.com>
2233 * ada-exp.y (write_object_renaming): Replace struct
2234 ada_symbol_info with struct block_symbol. Update field
2235 references accordingly.
2236 (block_lookup, select_possible_type_sym): Likewise.
2237 (find_primitive_type): Likewise. Also update call to
2238 ada_lookup_symbol to extract the symbol itself.
2239 (write_var_or_type, write_name_assoc): Likewise.
2240 * ada-lang.h (struct ada_symbol_info): Remove.
2241 (ada_lookup_symbol_list): Replace struct ada_symbol_info with
2242 struct block_symbol.
2243 (ada_lookup_encoded_symbol, user_select_syms): Likewise.
2244 (ada_lookup_symbol): Return struct block_symbol instead of a
2246 * ada-lang.c (defns_collected): Replace struct ada_symbol_info
2247 with struct block_symbol.
2248 (resolve_subexp, ada_resolve_function, sort_choices,
2249 user_select_syms, is_nonfunction, add_defn_to_vec,
2250 num_defns_collected, defns_collected,
2251 symbols_are_identical_enums, remove_extra_symbols,
2252 remove_irrelevant_renamings, add_lookup_symbol_list_worker,
2253 ada_lookup_symbol_list, ada_iterate_over_symbols,
2254 ada_lookup_encoded_symbol, get_var_value): Likewise.
2255 (ada_lookup_symbol): Return a block_symbol instead of a mere
2256 symbol. Replace struct ada_symbol_info with struct
2258 (ada_lookup_symbol_nonlocal): Likewise.
2259 (standard_lookup): Make block passing explicit through
2260 lookup_symbol_in_language.
2261 * ada-tasks.c (get_tcb_types_info): Update the calls to
2262 lookup_symbol_in_language to extract the mere symbol out of the
2264 (ada_tasks_inferior_data_sniffer): Likewise.
2265 * ax-gdb.c (gen_static_field): Likewise for the call to
2267 (gen_maybe_namespace_elt): Deal with struct block_symbol from
2269 (gen_expr): Likewise.
2270 * c-exp.y: Likewise. Remove uses of block_found.
2271 (lex_one_token, classify_inner_name, c_print_token): Likewise.
2272 (classify_name): Likewise. Rename the "sym" local variable to
2274 * c-valprint.c (print_unpacked_pointer): Likewise.
2275 * compile/compile-c-symbols.c (convert_symbol_sym): Promote the
2276 "sym" parameter from struct symbol * to struct block_symbol.
2277 Use it to remove uses of block_found. Deal with struct
2278 block_symbol from lookup functions.
2279 (gcc_convert_symbol): Likewise. Update the call to
2281 * compile/compile-object-load.c (compile_object_load): Deal with
2282 struct block_symbol from lookup functions.
2283 * cp-namespace.c (cp_lookup_nested_symbol_1,
2284 cp_lookup_nested_symbol, cp_lookup_bare_symbol,
2285 cp_search_static_and_baseclasses,
2286 cp_lookup_symbol_in_namespace, cp_lookup_symbol_via_imports,
2287 cp_lookup_symbol_imports_or_template,
2288 cp_lookup_symbol_via_all_imports, cp_lookup_symbol_namespace,
2289 lookup_namespace_scope, cp_lookup_nonlocal,
2290 find_symbol_in_baseclass): Return struct block_symbol instead of
2291 mere symbols and deal with struct block_symbol from lookup
2293 * cp-support.c (inspect_type, replace_typedefs,
2294 cp_lookup_rtti_type): Deal with struct block_symbol from
2296 * cp-support.h (cp_lookup_symbol_nonlocal,
2297 cp_lookup_symbol_from_namespace,
2298 cp_lookup_symbol_imports_or_template, cp_lookup_nested_symbol):
2299 Return struct block_symbol instead of mere symbols.
2300 * d-exp.y (d_type_from_name, d_module_from_name, push_variable,
2302 Deal with struct block_symbol from lookup functions. Remove
2303 uses of block_found.
2304 * eval.c (evaluate_subexp_standard): Update call to
2305 cp_lookup_symbol_namespace.
2306 * f-exp.y: Deal with struct block_symbol from lookup functions.
2307 Remove uses of block_found.
2309 * gdbtypes.c (lookup_typename, lookup_struct, lookup_union,
2310 lookup_enum, lookup_template_type, check_typedef): Deal with
2311 struct block_symbol from lookup functions.
2312 * guile/scm-frame.c (gdbscm_frame_read_var): Likewise.
2313 * guile/scm-symbol.c (gdbscm_lookup_symbol): Likewise.
2314 (gdbscm_lookup_global_symbol): Likewise.
2315 * gnu-v3-abi.c (gnuv3_get_typeid_type): Likewise.
2316 * go-exp.y: Likewise. Remove uses of block_found.
2317 (package_name_p, classify_packaged_name, classify_name):
2319 * infrun.c (insert_exception_resume_breakpoint): Likewise.
2320 * jv-exp.y (push_variable): Likewise.
2321 * jv-lang.c (java_lookup_class, get_java_object_type): Likewise.
2322 * language.c (language_bool_type): Likewise.
2323 * language.h (struct language_defn): Update
2324 la_lookup_symbol_nonlocal to return a struct block_symbol rather
2326 * linespec.c (find_label_symbols): Deal with struct block_symbol
2327 from lookup functions.
2328 * m2-exp.y: Likewise. Remove uses of block_found.
2330 * mi/mi-cmd-stack.c (list_args_or_locals): Likewise.
2331 * objc-lang.c (lookup_struct_typedef, find_imps): Likewise.
2332 * p-exp.y: Likewise. Remove uses of block_found.
2334 * p-valprint.c (pascal_val_print): Likewise.
2335 * parse.c (write_dollar_variable): Likewise. Remove uses of
2337 * parser-defs.h (struct symtoken): Turn the SYM field into a
2338 struct block_symbol.
2339 * printcmd.c (address_info): Deal with struct block_symbol from
2341 * python/py-frame.c (frapy_read_var): Likewise.
2342 * python/py-symbol.c (gdbpy_lookup_symbol,
2343 gdbpy_lookup_global_symbol): Likewise.
2344 * skip.c (skip_function_command): Likewise.
2345 * solib-darwin.c (darwin_lookup_lib_symbol): Return a struct
2346 block_symbol instead of a mere symbol.
2347 * solib-spu.c (spu_lookup_lib_symbol): Likewise.
2348 * solib-svr4.c (elf_lookup_lib_symbol): Likewise.
2349 * solib.c (solib_global_lookup): Likewise.
2350 * solist.h (solib_global_lookup): Likewise.
2351 (struct target_so_ops): Update lookup_lib_global_symbol to
2352 return a struct block_symbol rather than a mere symbol.
2353 * source.c (select_source_symtab): Deal with struct block_symbol
2354 from lookup functions.
2355 * stack.c (print_frame_args, iterate_over_block_arg_vars):
2357 * symfile.c (set_initial_language): Likewise.
2358 * symtab.c (SYMBOL_LOOKUP_FAILED): Turn into a struct
2360 (SYMBOL_LOOKUP_FAILED_P): New predicate as a macro.
2361 (struct symbol_cache_slot): Turn the FOUND field into a struct
2363 (block_found): Remove.
2364 (eq_symbol_entry): Update to deal with struct block_symbol in
2366 (symbol_cache_lookup): Return a struct block_symbol rather than
2368 (symbol_cache_mark_found): Add a BLOCK parameter to fill
2369 appropriately the cache slots. Update callers.
2370 (symbol_cache_dump): Update cache slots handling to the type
2372 (lookup_symbol_in_language, lookup_symbol, lookup_language_this,
2373 lookup_symbol_aux, lookup_local_symbol,
2374 lookup_symbol_in_objfile, lookup_global_symbol_from_objfile,
2375 lookup_symbol_in_objfile_symtabs,
2376 lookup_symbol_in_objfile_from_linkage_name,
2377 lookup_symbol_via_quick_fns, basic_lookup_symbol_nonlocal,
2378 lookup_symbol_in_static_block, lookup_static_symbol,
2379 lookup_global_symbol):
2380 Return a struct block_symbol rather than a mere symbol. Deal
2381 with struct block_symbol from other lookup functions. Remove
2382 uses of block_found.
2383 (lookup_symbol_in_block): Remove uses of block_found.
2384 (struct global_sym_lookup_data): Turn the RESULT field into a
2385 struct block_symbol.
2386 (lookup_symbol_global_iterator_cb): Update references to the
2388 (search_symbols): Deal with struct block_symbol from lookup
2390 * symtab.h (struct block_symbol): New structure.
2391 (block_found): Remove.
2392 (lookup_symbol_in_language, lookup_symbol,
2393 basic_lookup_symbol_nonlocal, lookup_symbol_in_static_block,
2394 lookup_static_symbol, lookup_global_symbol, lookup_language_this,
2395 lookup_global_symbol_from_objfile): Return a struct block_symbol
2396 rather than just a mere symbol. Update comments to remove
2397 mentions of block_found.
2398 * valops.c (find_function_in_inferior,
2399 value_struct_elt_for_reference, value_maybe_namespace_elt,
2400 value_of_this): Deal with struct block_symbol from lookup
2402 * value.c (value_static_field, value_fn_field): Likewise.
2404 2015-07-31 Simon Marchi <simon.marchi@ericsson.com>
2406 * remote-m32r-sdi.c (m32r_remove_watchpoint): Use enum type
2409 2015-07-31 Simon Marchi <simon.marchi@ericsson.com>
2410 Pedro Alves <palves@redhat.com>
2412 * aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Use enum
2413 type or value instead of integer.
2414 (aarch64_linux_insert_watchpoint): Likewise.
2415 (aarch64_linux_remove_watchpoint): Likewise.
2416 * ada-lang.c (ada_op_print_tab): Likewise.
2417 * amd64-linux-tdep.c (amd64_canonicalize_syscall): Likewise.
2418 (amd64_linux_syscall_record_common): Likewise.
2419 * arch-utils.c (target_byte_order_user): Likewise.
2420 (default_byte_order): Likewise.
2421 * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Likewise.
2422 (arm_linux_get_hwbp_type): Likewise.
2423 (arm_linux_hw_watchpoint_initialize): Likewise.
2424 (arm_linux_insert_watchpoint): Likewise.
2425 * arm-linux-tdep.c (arm_canonicalize_syscall): Likewise.
2426 (arm_linux_syscall_record): Likewise.
2427 * breakpoint.c (update_watchpoint): Likewise.
2428 (breakpoint_here_p): Likewise.
2429 (bpstat_print): Likewise.
2430 (enable_breakpoint_disp): Likewise.
2431 * c-lang.c (c_op_print_tab): Likewise.
2432 * cli/cli-decode.c (add_info_alias): Likewise.
2433 * d-lang.c (d_op_print_tab): Likewise.
2434 * eval.c (evaluate_subexp_standard): Likewise.
2435 * f-exp.y (dot_ops): Likewise.
2436 (f77_keywords): Likewise.
2437 * f-lang.c (f_op_print_tab): Likewise.
2438 * go-lang.c (go_op_print_tab): Likewise.
2439 * guile/scm-breakpoint.c (gdbscm_make_breakpoint): Likewise.
2440 * guile/scm-cmd.c (gdbscm_make_command): Likewise.
2441 * guile/scm-param.c (gdbscm_make_parameter): Likewise.
2442 * guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer): Likewise.
2443 * guile/scm-string.c (struct scm_to_stringn_data): Likewise.
2444 (struct scm_from_stringn_data): Likewise.
2445 * i386-linux-tdep.c (i386_canonicalize_syscall): Likewise.
2446 * ia64-linux-nat.c (ia64_linux_insert_watchpoint): Likewise.
2447 (ia64_linux_remove_watchpoint): Likewise.
2448 (ia64_linux_can_use_hw_breakpoint): Likewise.
2449 * infrun.c (print_stop_event): Likewise.
2450 * jv-lang.c (java_op_print_tab): Likewise.
2451 * linux-nat.c (linux_proc_xfer_partial): Likewise.
2452 * linux-nat.h (struct lwp_info): Likewise.
2453 * linux-thread-db.c (enable_thread_event): Likewise.
2454 * m2-lang.c (m2_op_print_tab): Likewise.
2455 * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise.
2456 (mi_cmd_stack_list_variables): Likewise.
2457 * mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise.
2458 * mi/mi-out.c (mi_table_begin): Likewise.
2459 (mi_table_header): Likewise.
2460 * mips-linux-nat.c (mips_linux_can_use_hw_breakpoint): Likewise.
2461 (mips_linux_insert_watchpoint): Likewise.
2462 (mips_linux_remove_watchpoint): Likewise.
2463 * nat/mips-linux-watch.c (mips_linux_watch_type_to_irw): Likewise.
2464 * nat/mips-linux-watch.h (struct mips_watchpoint): Likewise.
2465 (mips_linux_watch_type_to_irw): Likewise.
2466 * nto-procfs.c (procfs_can_use_hw_breakpoint): Likewise.
2467 (procfs_insert_hw_watchpoint): Likewise.
2468 (procfs_remove_hw_watchpoint): Likewise.
2469 (procfs_hw_watchpoint): Likewise.
2470 (procfs_can_use_hw_breakpoint): Likewise.
2471 (procfs_remove_hw_watchpoint): Likewise.
2472 (procfs_insert_hw_watchpoint): Likewise.
2473 * p-lang.c (pascal_op_print_tab): Likewise.
2474 * ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Likewise.
2475 * ppc-linux-tdep.c (ppu2spu_unwind_register): Likewise.
2476 * ppc-sysv-tdep.c (get_decimal_float_return_value): Likewise.
2477 * procfs.c (procfs_can_use_hw_breakpoint): Likewise.
2478 (procfs_insert_watchpoint): Likewise.
2479 (procfs_remove_watchpoint): Likewise.
2480 * psymtab.c (recursively_search_psymtabs): Likewise.
2481 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint): Likewise.
2482 (m32r_insert_watchpoint): Likewise.
2483 * remote-mips.c (mips_can_use_watchpoint): Likewise.
2484 (mips_insert_watchpoint): Likewise.
2485 (mips_remove_watchpoint): Likewise.
2486 * remote.c (watchpoint_to_Z_packet): Likewise.
2487 (remote_insert_watchpoint): Likewise.
2488 (remote_remove_watchpoint): Likewise.
2489 (remote_check_watch_resources): Likewise.
2490 * s390-linux-nat.c (s390_insert_watchpoint): Likewise.
2491 (s390_remove_watchpoint): Likewise.
2492 (s390_can_use_hw_breakpoint): Likewise.
2493 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
2494 * spu-linux-nat.c (spu_can_use_hw_breakpoint): Likewise.
2495 * target.h (struct target_ops): Likewise.
2496 * tilegx-tdep.c (tilegx_analyze_prologue): Likewise.
2497 * ui-out.c (struct ui_out_hdr): Likewise.
2498 (append_header_to_list): Likewise.
2499 (get_next_header): Likewise.
2500 (verify_field): Likewise.
2501 (ui_out_begin): Likewise.
2502 (ui_out_field_int): Likewise.
2503 (ui_out_field_fmt_int): Likewise.
2504 (ui_out_field_skip): Likewise.
2505 (ui_out_field_string): Likewise.
2506 (ui_out_field_fmt): Likewise.
2507 * varobj.c (new_variable): Likewise.
2508 * x86-nat.c (x86_insert_watchpoint): Likewise.
2509 (x86_remove_watchpoint): Likewise.
2510 (x86_can_use_hw_breakpoint): Likewise.
2511 * xtensa-tdep.h (struct gdbarch_tdep): Likewise.
2512 * inflow.c (enum gdb_has_a_terminal_flag_enum): Add name to
2513 previously anonymous enumeration type..
2514 * linux-record.h (enum gdb_syscall): Add gdb_sys_no_syscall
2516 * target-debug.h (target_debug_print_enum_target_hw_bp_type): New.
2517 (target_debug_print_enum_bptype): New.
2518 * target-delegates.c: Regenerate.
2520 2015-07-30 Sandra Loosemore <sandra@codesourcery.com>
2522 * nios2-tdep.c (nios2_analyze_prologue): Do what the comment
2523 already says and disallow non-stack memory writes in the prologue.
2525 2015-07-30 Sandra Loosemore <sandra@codesourcery.com>
2527 * nios2-tdep.c (nios2_analyze_prologue): Update comments to
2528 reflect how current GCC emits stack overflow checks. Match
2529 both trap and break instructions for backward compatbility.
2530 Disallow other trap and break instructions in the prologue.
2532 2015-07-30 Pedro Alves <palves@redhat.com>
2535 * linux-nat.c (wait_lwp): Report to the core when thread group
2538 2015-07-30 Pedro Alves <palves@redhat.com>
2539 Simon Marchi <simon.marchi@ericsson.com>
2542 * linux-nat.c (linux_handle_extended_wait): On CLONE event, always
2543 mark the new thread as resumed. Remove STOPPING parameter.
2544 (wait_lwp): Adjust call to linux_handle_extended_wait.
2545 (linux_nat_filter_event): Adjust call to
2546 linux_handle_extended_wait.
2547 (resume_stopped_resumed_lwps): Add debug output.
2549 2015-07-30 Pierre Langlois <pierre.langlois@arm.com>
2551 * arch-utils.c (default_fast_tracepoint_valid_at): Remove unused
2553 * arch-utils.h (default_fast_tracepoint_valid_at): Likewise.
2554 * breakpoint.c (check_fast_tracepoint_sals): Adjust call to
2555 gdbarch_fast_tracepoint_valid_at.
2556 * gdbarch.sh (fast_tracepoint_valid_at): Remove isize argument.
2557 * gdbarch.h: Regenerate.
2558 * gdbarch.c: Regenerate.
2559 * i386-tdep.c (i386_fast_tracepoint_valid_at): Remove isize
2560 argument. Do not set it.
2561 * remote.c (remote_download_tracepoint): Adjust call to
2562 gdbarch_fast_tracepoint_valid_at. Call gdb_insn_length to get
2563 the instruction length.
2565 2015-07-30 Yao Qi <yao.qi@linaro.org>
2567 * arm-tdep.h (enum gdb_regnum): Move it to ...
2568 * arch/arm.h: ... here. New file.
2569 * Makefile.in (HFILES_NO_SRCDIR): Add arch/arm.h.
2571 2015-07-30 Pierre Langlois <pierre.langlois@arm.com>
2573 * aarch64-tdep.c (decode_b): Rename link argument to is_bl.
2574 Change its type to int *.
2575 (decode_br): Rename link argument to is_blr. Change its type to
2577 (decode_cb): Rename op argument to is_cbnz. Change its type to
2579 (decode_tb): Rename op argument to is_tbnz. Change its type to
2580 int *. Set is_tbnz to either 1 or 0.
2581 (aarch64_analyze_prologue): Change type of is_link to int. Add
2582 new variables is_cbnz and is_tbnz. Adjust call to
2583 aarch64_decode_cb and aarch64_decode_tb.
2585 2015-07-29 Simon Marchi <simon.marchi@ericsson.com>
2587 * mips-linux-nat.c (write_watchpoint_regs): Add NULL as ptrace's 4th
2589 (mips_linux_new_thread): Likewise.
2590 * nat/mips-linux-watch.c (mips_linux_read_watch_registers): Likewise.
2592 2015-07-29 Patrick Palka <patrick@parcs.ath.cx>
2594 * top.c: Include "tui/tui.h".
2595 (undo_terminal_modifications_before_exit): New static function.
2596 (quit_force): Use it.
2598 2015-07-29 Patrick Palka <patrick@parcs.ath.cx>
2600 * target.c (terminal_state): Initialize to terminal_is_ours.
2602 2015-07-29 Yao Qi <yao.qi@linaro.org>
2605 * dcache.c (dcache_read_memory_partial): Call
2606 raw_memory_xfer_partial.
2607 * target.c (raw_memory_xfer_partial): Make it non-static.
2608 * target.h (raw_memory_xfer_partial): Declare.
2610 2015-07-28 Simon Marchi <simon.marchi@ericsson.com>
2612 * c-valprint.c (c_val_print_array): Consider addressable memory
2614 (c_val_print_ptr): Likewise.
2615 (c_val_print_int): Likewise.
2616 * findvar.c (read_frame_register_value): Likewise.
2617 * valarith.c (find_size_for_pointer_math): Likewise.
2618 (value_ptrdiff): Likewise.
2619 (value_subscripted_rvalue): Likewise.
2620 * valops.c (read_value_memory): Likewise (and rename variables).
2621 (value_assign): Likewise.
2622 (value_repeat): Likewise.
2623 (value_array): Likewise.
2624 (value_slice): Likewise.
2625 * valprint.c (generic_val_print_ptr): Likewise.
2626 (generic_val_print_enum): Likewise.
2627 (generic_val_print_bool): Likewise.
2628 (generic_val_print_int): Likewise.
2629 (generic_val_print_char): Likewise.
2630 (generic_val_print_float): Likewise.
2631 (generic_val_print_decfloat): Likewise.
2632 (generic_val_print_complex): Likewise.
2633 (val_print_scalar_formatted): Likewise.
2634 (val_print_array_elements): Likewise.
2635 * value.c (set_value_parent): Likewise.
2636 (value_contents_copy_raw): Likewise.
2637 (set_internalvar_component): Likewise.
2638 (value_primitive_field): Likewise.
2639 (value_fetch_lazy): Likewise.
2640 * value.h (read_value_memory): Update comment.
2642 2015-07-28 Simon Marchi <simon.marchi@ericsson.com>
2644 * value.c (get_value_arch): New function.
2645 * value.h (get_value_arch): New declaration.
2647 2015-07-28 Simon Marchi <simon.marchi@ericsson.com>
2649 * value.c (struct value): Update comments.
2651 2015-07-28 Simon Marchi <simon.marchi@ericsson.com>
2653 * gdbtypes.c (type_length_units): New function.
2654 * gdbtypes.h (type_length_units): New declaration.
2655 (struct type) <length>: Update comment.
2657 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2659 * valprint.c (generic_val_print): Factor out complex
2660 printing code to ...
2661 (generic_val_print_complex): ... this new function.
2663 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2665 * valprint.c (generic_val_print): Factor out decfloat
2666 printing code to ...
2667 (generic_val_print_decfloat): ... this new function.
2669 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2671 * valprint.c (generic_val_print): Factor out float
2672 printing code to ...
2673 (generic_val_print_float): ... this new function.
2675 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2677 * valprint.c (generic_val_print): Factor out char
2678 printing code to ...
2679 (generic_val_print_char): ... this new function.
2681 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2683 * valprint.c (generic_val_print): Factor out integer
2684 printing code to ...
2685 (generic_val_print_int): ... this new function.
2687 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2689 * valprint.c (generic_val_print): Factor out bool
2690 printing code to ...
2691 (generic_val_print_bool): ... this new function.
2693 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2695 * valprint.c (generic_val_print): Factor out function/method
2696 printing code to ...
2697 (generic_val_print_func): ... this new function.
2699 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2701 * valprint.c (generic_val_print): Factor out flags
2702 printing code to ...
2703 (generic_val_print_flags): ... this new function.
2705 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2707 * valprint.c (generic_val_print): Factor out enum
2708 printing code to ...
2709 (generic_val_print_enum): ... this new function.
2711 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2713 * valprint.c (generic_val_print): Factor out reference
2714 printing code to ...
2715 (generic_val_print_ref): ... this new function.
2717 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2719 * valprint.c (generic_val_print): Factor out memberptr
2720 printing code to ...
2721 (generic_val_print_memberptr): ... this new function.
2723 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2725 * valprint.c (generic_val_print): Factor out pointer
2726 printing code to ...
2727 (generic_val_print_ptr): ... this new function.
2729 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2731 * valprint.c (generic_val_print): Factor out array
2732 printing code to ...
2733 (generic_val_print_array): ... this new function.
2735 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2737 * valprint.c (generic_val_print): Factor out
2738 print_unpacked_pointer code to ...
2739 (print_unpacked_pointer): ... this new function.
2741 2015-07-27 Patrick Palka <patrick@parcs.ath.cx>
2743 * event-top.c (handle_sigterm): Don't inspect
2744 target_can_async_p. Always set the quit flag and always mark
2745 the async signal handler.
2747 2015-07-27 Yao Qi <yao.qi@linaro.org>
2749 * Makefile.in (REMOTE_EXAMPLES): Remove it.
2751 2015-07-25 Kevin Buettner <kevinb@redhat.com>
2753 * remote.c (read_ptid): Return null_ptid when no thread id
2755 (remote_current_thread): Add log warning for malformed
2757 (remote_start_remote): Add log warning when current thread
2760 2015-07-24 Pedro Alves <palves@redhat.com>
2762 * s390-linux-nat.c (fetch_regs, store_regs, fetch_fpregs)
2763 (s390_stopped_by_watchpoint, s390_prepare_to_resume): Pass 0 as
2764 forth argument to ptrace PTRACE_PEEKUSR_AREA/PTRACE_POKEUSR_AREA.
2766 2015-07-24 Pedro Alves <palves@redhat.com>
2769 * linux-nat.c (linux_nat_filter_event): Don't assert that the lwp
2770 is resumed, and extend the debug log.
2772 2015-07-24 Pedro Alves <palves@redhat.com>
2774 * fork-child.c (fork_inferior): Print argv[0] instead of exec_file.
2776 2015-07-24 Pedro Alves <palves@redhat.com>
2778 * aarch64-linux-nat.c: Include nat/gdb_ptrace.h instead of
2780 * alpha-linux-nat.c: Likewise.
2781 * amd64-linux-nat.c: Likewise.
2782 * arm-linux-nat.c: Likewise.
2783 * hppa-linux-nat.c: Likewise.
2784 * i386-linux-nat.c: Likewise.
2785 * ia64-linux-nat.c: Likewise.
2786 * linux-fork.c: Likewise.
2787 * linux-nat.c: Likewise.
2788 * m32r-linux-nat.c: Likewise.
2789 * m68klinux-nat.c: Likewise.
2790 * mips-linux-nat.c: Likewise.
2791 * nat/linux-btrace.c: Likewise.
2792 * nat/linux-ptrace.c: Likewise.
2793 * nat/linux-ptrace.h
2794 * nat/mips-linux-watch.c: Likewise.
2795 * nat/x86-linux-dregs.c: Likewise.
2796 * ppc-linux-nat.c: Likewise.
2797 * s390-linux-nat.c: Likewise.
2798 * spu-linux-nat.c: Likewise.
2799 * tilegx-linux-nat.c: Likewise.
2800 * x86-linux-nat.c: Likewise.
2801 * xtensa-linux-nat.c: Likewise.
2803 2015-07-24 Pedro Alves <palves@redhat.com>
2805 * ptrace.m4 (ptrace tests): Test in C++ mode. Try with 'enum
2806 __ptrace_request as first parameter type instead of int.
2807 (PTRACE_TYPE_ARG1): Define.
2808 * nat/gdb_ptrace.h [!PTRACE_TYPE_ARG5] (ptrace): Define as wrapper
2809 that casts first argument to PTRACE_TYPE_ARG1.
2810 * config.in: Regenerate.
2811 * configure: Regenerate.
2813 2015-07-24 Pedro Alves <palves@redhat.com>
2815 * gdb_ptrace.h: Move ...
2816 * nat/gdb_ptrace.h: ... here.
2817 * inf-ptrace.c: Adjust.
2819 2015-07-24 Pedro Alves <palves@redhat.com>
2821 * acinclude.m4: Include ptrace.m4.
2822 * configure.ac: Call GDB_AC_PTRACE and move ptrace checks ...
2823 * ptrace.m4: ... to this new file.
2825 2015-07-23 Doug Evans <dje@google.com>
2827 * dwarf2read.c (dwarf2_per_cu_data): Add comment.
2828 (load_cu): Handle dummy CUs.
2829 (dw2_do_instantiate_symtab, process_queuef): Ditto.
2830 (dwarf2_fetch_die_loc_sect_off, dwarf2_fetch_constant_bytes): Ditto.
2832 2015-07-23 Ciro Santilli <ciro.santilli@gmail.com> (tiny patch)
2834 * py-linetable.c (ltpy_get_all_source_lines): Adjust function
2835 documentation to say that it returns a list rather than
2837 (linetable_object_methods): Update the docstring of the
2838 "source_line" entry.
2840 2015-07-23 Pierre-Marie de Rodat <derodat@adacore.com>
2842 * gdbtypes.c (resolve_dynamic_array): Pass the peeled element
2843 type to the recursive call instead of the original (maybe
2844 TYPE_CODE_TYPEDEF) type.
2846 2015-07-23 Yao Qi <yao.qi@linaro.org>
2848 * aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): If
2849 TYPE is watchpoint, return zero if aarch64_num_wp_regs is zero.
2850 If TYPE is breakpoint, return zero if arch64_num_bp_regs is zero.
2852 2015-07-21 Yao Qi <yao.qi@linaro.org>
2854 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity):
2855 Move it to nat/aarch64-linux-hw-point.c.
2856 (aarch64_linux_child_post_startup_inferior): Update.
2857 * nat/aarch64-linux-hw-point.c (aarch64_linux_get_debug_reg_capacity):
2859 * nat/aarch64-linux-hw-point.h (aarch64_linux_get_debug_reg_capacity):
2862 2015-07-21 Markus Metzger <markus.t.metzger@intel.com>
2864 * common/btrace-common.c (btrace_data_append): Change case label.
2866 2015-07-20 Yao Qi <yao.qi@linaro.org>
2868 * nat/aarch64-linux-hw-point.c (aarch64_handle_unaligned_watchpoint):
2870 * nat/aarch64-linux-hw-point.h: Use ULONGEST rather than
2871 "unsigned long long".
2873 2015-07-18 Kevin Buettner <kevinb@redhat.com>
2875 * dwarf2read.c (dwarf2_locate_sections): Allow has_section_at_zero
2876 to be set for SEC_ALLOC sections too.
2878 2015-07-17 Yao Qi <yao.qi@linaro.org>
2880 * Makefile.in (HFILES_NO_SRCDIR): Add
2881 nat/aarch64-linux-hw-point.h.
2882 (aarch64-linux-hw-point.o): New rule.
2883 * nat/aarch64-linux-hw-point.h: New file.
2884 * nat/aarch64-linux-hw-point.c: New file.
2885 * aarch64-linux-nat.c: Include nat/aarch64-linux-hw-point.h.
2886 (AARCH64_HBP_MAX_NUM): Move to nat/aarch64-linux-hw-point.h.
2887 (AARCH64_HWP_MAX_NUM, AARCH64_HBP_ALIGNMENT): Likewise.
2888 (AARCH64_HWP_ALIGNMENT): Likewise.
2889 (AARCH64_HWP_MAX_LEN_PER_REG): Likewise.
2890 (AARCH64_DEBUG_NUM_SLOTS, AARCH64_DEBUG_ARCH): Likewise.
2891 (AARCH64_DEBUG_ARCH_V8, DR_MARK_ALL_CHANGED): Likewise.
2892 (DR_MARK_N_CHANGED, DR_CLEAR_CHANGED): Likewise.
2893 (DR_HAS_CHANGED, DR_N_HAS_CHANGE): Likewise.
2894 (aarch64_num_bp_regs, aarch64_num_wp_regs): Likewise.
2895 (struct aarch64_debug_reg_state): Likewise.
2896 (struct arch_lwp_info): Likewise.
2897 (aarch64_linux_set_debug_regs): Likewise.
2898 (aarch64_notify_debug_reg_change): Remove static.
2899 (aarch64_align_watchpoint): Likewise.
2900 (DR_CONTROL_ENABLED, DR_CONTROL_LENGTH): Likewise.
2901 (aarch64_watchpoint_length): Likewise.
2902 (aarch64_point_encode_ctrl_reg): Likewise
2903 (aarch64_point_is_aligned): Likewise.
2904 (aarch64_dr_state_insert_one_point): Likewise.
2905 (aarch64_dr_state_remove_one_point): Likewise.
2906 (aarch64_handle_breakpoint): Likewise.
2907 (aarch64_handle_aligned_watchpoint): Likewise.
2908 (aarch64_handle_unaligned_watchpoint): Likewise.
2909 (aarch64_handle_watchpoint): Likewise.
2910 * config/aarch64/linux.mh (NAT_FILE): Add
2911 aarch64-linux-hw-point.o.
2913 2015-07-17 Yao Qi <yao.qi@linaro.org>
2915 * aarch64-linux-nat.c (aarch64_handle_breakpoint): Add argument
2916 state and don't call aarch64_get_debug_reg_state. All callers
2918 (aarch64_linux_insert_hw_breakpoint): Call
2919 aarch64_get_debug_reg_state earlier.
2920 (aarch64_linux_remove_hw_breakpoint): Likewise.
2921 (aarch64_handle_aligned_watchpoint): Add argument state and
2922 don't call aarch64_get_debug_reg_state. All callers update.
2923 (aarch64_handle_unaligned_watchpoint): Likewise.
2924 (aarch64_handle_watchpoint): Add argument state.
2925 (aarch64_linux_insert_watchpoint): Call aarch64_get_debug_reg_state
2927 (aarch64_linux_remove_watchpoint): Likewise.
2929 2015-07-17 Yao Qi <yao.qi@linaro.org>
2931 * aarch64-linux-nat.c (aarch64_show_debug_reg_state): Use
2933 (aarch64_handle_unaligned_watchpoint): Likewise.
2935 2015-07-17 Yao Qi <yao.qi@linaro.org>
2937 * aarch64-linux-nat.c (aarch64_dr_state_insert_one_point): Change
2938 argument type's type to 'enum target_hw_bp_type'.
2939 (aarch64_dr_state_remove_one_point): Likewise.
2940 (aarch64_handle_breakpoint): Likewise.
2941 (aarch64_linux_insert_hw_breakpoint): Likewise.
2942 (aarch64_linux_remove_hw_breakpoint): Likewise.
2943 (aarch64_handle_aligned_watchpoint): Likewise.
2945 2015-07-17 Yao Qi <yao.qi@linaro.org>
2947 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity): Call
2948 ptid_get_pid instead of get_thread_id.
2950 2015-07-17 Yao Qi <yao.qi@linaro.org>
2952 * remote.c (get_current_thread): Initialise ptid to null_ptid.
2953 (add_current_inferior_and_thread): Don't initialise ptid.
2955 2015-07-16 Pierre Langlois <pierre.langlois@arm.com>
2957 * aarch64-tdep.c (aarch64_pseudo_read_value): Mark S register as
2958 unavailable if invalid.
2960 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
2962 Revert the previous 6 commits:
2963 Create empty nat/linux-maps.[ch] and common/target-utils.[ch].
2964 Move gdb_regex* to common/
2965 Prepare linux_find_memory_regions_full & co. for move
2966 Move linux_find_memory_regions_full & co.
2967 gdbserver build-id attribute generator
2968 Validate symbol file using build-id
2970 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
2971 Jan Kratochvil <jan.kratochvil@redhat.com>
2973 Validate symbol file using build-id.
2974 * NEWS (Changes since GDB 7.10): Add 'set validate-build-id'
2975 and 'show validate-build-id'. Add build-id attribute.
2976 * solib-darwin.c (_initialize_darwin_solib): Assign validate value.
2977 * solib-dsbt.c (_initialize_dsbt_solib): Ditto.
2978 * solib-frv.c (_initialize_frv_solib): Ditto.
2979 * solib-spu.c (set_spu_solib_ops): Ditto.
2980 * solib-svr4.c: Include rsp-low.h.
2981 (NOTE_GNU_BUILD_ID_NAME): New define.
2982 (svr4_validate): New function.
2983 (svr4_copy_library_list): Duplicate field build_id.
2984 (library_list_start_library): Parse 'build-id' attribute.
2985 (svr4_library_attributes): Add 'build-id' attribute.
2986 (_initialize_svr4_solib): Assign validate value.
2987 * solib-target.c (solib.h): Include.
2988 (_initialize_solib_target): Assign validate value.
2989 * solib.c (validate_build_id, show_validate_build_id): New.
2990 (solib_map_sections): Use ops->validate.
2991 (clear_so): Free build_id.
2992 (default_solib_validate): New function.
2993 (_initialize_solib): Add "validate-build-id".
2994 * solib.h (default_solib_validate): New declaration.
2995 * solist.h (struct so_list): New fields 'build_idsz' and 'build_id'.
2996 (target_so_ops): New field 'validate'.
2998 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
2999 Jan Kratochvil <jan.kratochvil@redhat.com>
3001 gdbserver build-id attribute generator.
3002 * features/library-list-svr4.dtd (library-list-svr4): New
3003 'build-id' attribute.
3005 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
3006 Jan Kratochvil <jan.kratochvil@redhat.com>
3008 Move linux_find_memory_regions_full & co.
3009 * linux-tdep.c (nat/linux-maps.h): Include.
3010 (gdb_regex.h): Remove the include.
3011 (enum filterflags, struct smaps_vmflags, read_mapping, decode_vmflags)
3012 (mapping_is_anonymous_p, dump_mapping_p): Moved to nat/linux-maps.c.
3013 (linux_find_memory_region_ftype): Moved typedef to nat/linux-maps.h.
3014 (linux_find_memory_regions_full): Moved definition to nat/linux-maps.c.
3015 * nat/linux-maps.c: Include ctype.h, target/target-utils.h, gdb_regex.h
3016 and target/target.h.
3017 (struct smaps_vmflags, read_mapping, decode_vmflags)
3018 (mapping_is_anonymous_p, dump_mapping_p): Move from linux-tdep.c.
3019 (linux_find_memory_regions_full): Move from linux-tdep.c.
3020 * nat/linux-maps.h (read_mapping): New declaration.
3021 (linux_find_memory_region_ftype, enum filterflags): Moved from
3023 (linux_find_memory_regions_full): New declaration.
3024 * target.c (target/target-utils.h): Include.
3025 (read_alloc_pread_ftype): Moved typedef to target/target-utils.h.
3026 (read_alloc, read_stralloc_func_ftype, read_stralloc): Moved
3027 definitions to target/target-utils.c.
3028 * target.h (target_fileio_read_stralloc): Move it to target/target.h.
3029 * target/target-utils.c (read_alloc, read_stralloc): Move definitions
3031 * target/target-utils.h (read_alloc_pread_ftype): New typedef.
3032 (read_alloc): New declaration.
3033 (read_stralloc_func_ftype): New typedef.
3034 (read_stralloc): New declaration.
3035 * target/target.h (target_fileio_read_stralloc): Move it from target.h.
3037 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
3038 Jan Kratochvil <jan.kratochvil@redhat.com>
3040 Prepare linux_find_memory_regions_full & co. for move.
3041 * linux-tdep.c (linux_find_memory_region_ftype): Comment.
3042 (linux_find_memory_regions_full): Change signature and prepare
3043 for moving to linux-maps.
3044 (linux_find_memory_regions_data): Rename field 'obfd' to 'data'.
3045 (linux_find_memory_regions_thunk): New.
3046 (linux_find_memory_regions_thunk): Use 'data' field instead of 'obfd'.
3047 (linux_find_memory_regions_gdb): New.
3048 (linux_find_memory_regions): Rename argument 'obfd' to 'func_data'.
3049 (linux_make_mappings_corefile_notes): Use
3050 linux_find_memory_regions_gdb.
3051 * target.c (read_alloc_pread_ftype): New typedef.
3052 (target_fileio_read_alloc_1_pread): New function.
3053 (read_alloc): Refactor from target_fileio_read_alloc_1.
3054 (read_stralloc_func_ftype): New typedef.
3055 (target_fileio_read_alloc_1): New implementation. Use read_alloc.
3056 (read_stralloc): Refactored from target_fileio_read_stralloc.
3057 (target_fileio_read_stralloc): New implementation, use read_stralloc.
3059 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
3061 * Makefile.in (HFILES_NO_SRCDIR): Change gdb_regex.h to
3063 (COMMON_OBS): Add gdb_regex.o.
3065 * common/common.m4 (GDB_AC_COMMON): Add gdb_use_included_regex,
3066 --without-included-regex and USE_INCLUDED_REGEX.
3067 * common/gdb_regex.c: New file from utils.c functions.
3068 * common/gdb_regex.h: Move it here from gdb_regex.h, update include
3069 file wrapping define name.
3070 * configure: Rebuilt.
3071 * configure.ac (gdb_use_included_regex, --without-included-regex)
3072 (USE_INCLUDED_REGEX): Move them to common/common.m4.
3073 * gdb_regex.h: Move it to common/gdb_regex.h.
3074 * utils.c: Remove include gdb_regex.h.
3075 (do_regfree_cleanup, make_regfree_cleanup, get_regcomp_error)
3076 (compile_rx_or_error): Move them to common/gdb_regex.c.
3078 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
3079 Jan Kratochvil <jan.kratochvil@redhat.com>
3081 Create empty nat/linux-maps.[ch] and common/target-utils.[ch].
3082 * Makefile.in (HFILES_NO_SRCDIR); Add nat/linux-maps.h,
3083 common/target-utils.h.
3084 (COMMON_OBS): Add target-utils.o.
3085 (linux-maps.o, target-utils.o): New.
3086 * target/target-utils.c: New file.
3087 * target/target-utils.h: New file.
3088 * config/i386/linux.mh (NATDEPFILES): Add linux-maps.o.
3089 * config/i386/linux64.mh (NATDEPFILES): Ditto.
3090 * nat/linux-maps.c: New file.
3091 * nat/linux-maps.h: New file.
3093 2015-07-15 Markus Metzger <markus.t.metzger@intel.com>
3094 Pedro Alves <palves@redhat.com>
3096 * nat/linux-btrace.c (perf_event_read): Change the type of DATA_HEAD.
3097 (perf_event_read_all): Change the type of SIZE and DATA_HEAD.
3098 (perf_event_read_bts): Change the type of SIZE and READ.
3099 (linux_enable_bts): Change the type of SIZE, PAGES, DATA_SIZE,
3100 and DATA_OFFSET. Move DATA_SIZE declaration. Restrict the buffer size
3101 to UINT_MAX. Check for overflows when using DATA_HEAD from the perf
3103 (linux_enable_pt): Change the type of PAGES and SIZE. Restrict the
3104 buffer size to UINT_MAX.
3105 (linux_read_bts): Change the type of BUFFER_SIZE, SIZE, DATA_HEAD, and
3107 * nat/linux-btrace.h (struct perf_event_buffer)<size, data_head>
3108 <last_head>: Change type.
3109 * common/btrace-common.h (struct btrace_dat_pt) <size>: Change type.
3110 * common/btrace-common.c (btrace_data_append): Change the type of
3112 * btrace.c (parse_xml_raw): Change the type of SIZE. Change oddness
3115 2015-07-14 Simon Marchi <simon.marchi@ericsson.com>
3117 * gdbtypes.h (CHECK_TYPEDEF): Remove.
3118 * aarch64-tdep.c (aarch64_return_in_memory): Replace CHECK_TYPEDEF
3120 * ada-lang.c (decode_constrained_packed_array_type): Likewise.
3121 (ada_array_length): Likewise.
3122 (find_parallel_type_by_descriptive_type): Likewise.
3123 (ada_check_typedef): Likewise.
3124 * arm-tdep.c (arm_return_in_memory): Likewise.
3125 * ax-gdb.c (gen_trace_static_fields): Likewise.
3126 (gen_struct_ref_recursive): Likewise.
3127 * c-exp.y (exp : SIZEOF '(' type ')' %prec UNARY): Likewise.
3128 (variable: block COLONCOLON name): Likewise.
3129 (qualified_name: TYPENAME COLONCOLON name): Likewise.
3130 * c-lang.c (classify_type): Likewise.
3131 * c-typeprint.c (c_print_type): Likewise.
3132 (c_print_typedef): Likewise.
3133 (c_type_print_base): Likewise.
3134 * c-valprint.c (c_val_print): Likewise.
3135 * compile/compile-c-types.c (convert_type): Likewise.
3136 * compile/compile-object-load.c (get_out_value_type): Likewise.
3137 * completer.c (add_struct_fields): Likewise.
3138 (expression_completer): Likewise.
3139 * cp-namespace.c (cp_find_type_baseclass_by_name): Likewise.
3140 (cp_lookup_nested_symbol_1): Likewise.
3141 (cp_lookup_nested_symbol): Likewise.
3142 * cp-valprint.c (cp_print_value_fields): Likewise.
3143 (cp_print_static_field): Likewise.
3144 * d-valprint.c (d_val_print): Likewise.
3145 * eval.c (evaluate_subexp_standard): Likewise.
3146 (evaluate_subexp_for_sizeof): Likewise.
3147 * f-exp.y (exp : SIZEOF '(' type ')' %prec UNARY): Likewise.
3148 * f-typeprint.c (f_type_print_base): Likewise.
3149 * f-valprint.c (f_val_print): Likewise.
3150 * gdbtypes.c (get_discrete_bounds): Likewise.
3151 (create_array_type_with_stride): Likewise.
3152 (type_name_no_tag_or_error): Likewise.
3153 (lookup_struct_elt_type): Likewise.
3154 (get_unsigned_type_max): Likewise.
3155 (internal_type_vptr_fieldno): Likewise.
3156 (set_type_vptr_fieldno): Likewise.
3157 (internal_type_vptr_basetype): Likewise.
3158 (set_type_vptr_basetype): Likewise.
3159 (get_vptr_fieldno): Likewise.
3160 (is_integral_type): Likewise.
3161 (is_scalar_type): Likewise.
3162 (is_scalar_type_recursive): Likewise.
3163 (distance_to_ancestor): Likewise.
3164 (is_unique_ancestor_worker): Likewise.
3165 (check_types_equal): Likewise.
3166 * gnu-v2-abi.c (gnuv2_value_rtti_type): Likewise.
3168 2015-07-14 Iain Buclaw <ibuclaw@gdcproject.org>
3170 * dwarf2read.c (find_slot_in_mapped_hash): Extend language support to
3171 also test for language_d.
3172 (dwarf2_compute_name): Likewise.
3173 (read_func_scope): Likewise.
3174 (read_structure_type): Likewise.
3175 (new_symbol_full): Likewise.
3176 (determine_prefix): Likewise.
3177 (read_import_statement): Use dot as the separator for language_d.
3178 (typename_concat): Likewise, but don't prefix the D main function.
3180 2015-07-14 Peter Bergner <bergner@vnet.ibm.com>
3182 * nat/linux-namespaces.c (setns): Rename from this ...
3183 (do_setns): ... to this. Support calling setns if it exists.
3184 (mnsh_handle_setns): Call do_setns.
3186 2015-07-13 Yao Qi <yao.qi@linaro.org>
3188 * exec.c (exec_file_attach): Add period at the end of error
3191 2015-07-13 Andrew Burgess <andrew.burgess@embecosm.com>
3193 * tui/tui-win.c (window_name_completer): New function.
3194 (focus_completer): Call window_name_completer. All old content
3195 moved into window_name_completer.
3196 (winheight_completer): New function.
3197 (_initialize_tui_win): Rename variable. Add completer to
3198 winheight command. Update doc string on winheight.
3200 2015-07-12 Sandra Loosemore <sandra@codesourcery.com>
3202 * nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Register
3203 all nios2 mach variants.
3205 2015-07-10 Kevin Buettner <kevinb@redhat.com>
3207 * rx-tdep.c (rx_get_opcode_byte): Use target_read_code instead
3208 of target_read_memory.
3210 2015-07-10 Andrew Burgess <andrew.burgess@embecosm.com>
3212 * tui/tui-win.c (tui_set_win_height): Use a cleanup to free the
3214 (parse_scrolling_args): Likewise.
3216 2015-07-10 Andrew Burgess <andrew.burgess@embecosm.com>
3218 * tui/tui-win.c (focus_completer): Don't duplicate the tui window
3219 names in this function.
3221 2015-07-10 Andrew Burgess <andrew.burgess@embecosm.com>
3223 * tui/tui-data.h (SRC_NAME): Convert to lower case.
3224 (CMD_NAME): Likewise.
3225 (DATA_NAME): Likewise.
3226 (DISASSEM_NAME): Likewise.
3227 * tui/tui-win.c (tui_set_focus): Window names are now lower case.
3228 (tui_set_win_height): Likewise.
3229 (parse_scrolling_args): Likewise.
3231 2015-07-10 Markus Metzger <markus.t.metzger@intel.com>
3233 * record-btrace.c (record_btrace_goto_begin)
3234 (record_btrace_goto_end, record_btrace_goto): Move call to
3235 print_stack_frame ...
3236 (record_btrace_set_replay): ... here. Set stop_pc.
3237 * record-full.c (record_full_goto_entry): Set stop_pc.
3239 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3241 * NEWS: Mention support for tracepoints on aarch64-linux.
3243 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3245 * linux-aarch64-low.c (aarch64_supports_tracepoints): New
3247 (the_low_target): Install it.
3249 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3251 * gdb.trace/backtrace.exp: Set registers for aarch64 target.
3252 * gdb.trace/collection.exp: Likewise.
3253 * gdb.trace/mi-trace-frame-collected.exp: Likewise.
3254 * gdb.trace/mi-trace-unavailable.exp: Likewise.
3255 * gdb.trace/report.exp: Likewise.
3256 * gdb.trace/trace-break.exp: Likewise.
3257 * gdb.trace/unavailable.exp: Likewise.
3258 * gdb.trace/while-dyn.exp: Likewise.
3260 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3262 * aarch64-tdep.c: Add ax.h and ax-gdb.h includes.
3263 (aarch64_gen_return_address): New function.
3264 (aarch64_gdbarch_init): Hook it.
3266 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3268 * aarch64-tdep.c (aarch64_make_stub_cache): Set available_p and
3269 swallow NOT_AVAILABLE_ERROR.
3270 (aarch64_stub_this_id): Call frame_id_build_unavailable_stack if
3271 available_p is not set.
3272 (aarch64_stub_frame_unwind_stop_reason): New function.
3273 (aarch64_stub_unwind): Install it.
3275 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3277 * aarch64-tdep.c (aarch64_prologue_cache) <available_p>: New
3279 (aarch64_make_prologue_cache_1): New function, factored out from
3280 aarch64_make_prologue_cache. Do not allocate cache. Set
3282 (aarch64_make_prologue_cache): Reimplement wrapping
3283 aarch64_make_prologue_cache_1, and swallowing
3284 NOT_AVAILABLE_ERROR.
3285 (aarch64_prologue_frame_unwind_stop_reason): New function.
3286 Return UNWIND_UNAVAILABLE if available_p is not set.
3287 (aarch64_prologue_unwind): Install it.
3288 (aarch64_prologue_this_id): Move prev_pc and prev_sp limit
3289 checks into aarch64_prologue_frame_unwind_stop_reason. Call
3290 frame_id_build_unavailable_stack if available_p is not set.
3292 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3294 * aarch64-tdep.c (aarch64_prologue_cache) <func, prev_pc>: New
3296 (aarch64_scan_prologue): Set prev_pc.
3297 (aarch64_make_prologue_cache): Set func.
3298 (aarch64_make_stub_cache): Set prev_pc.
3299 (aarch64_prologue_this_id): Remove local variables id, pc and
3300 func. Read prev_pc and func from cache.
3301 (aarch64_stub_this_id): Read prev_pc from cache.
3303 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3305 * aarch64-tdep.c (aarch64_make_stub_cache): Update comment. New
3306 argument this_cache. Remove unused local variables reg and
3307 unwound_fp. Return early if this_cache is already set. Set
3309 (aarch64_stub_this_id): Update call to aarch64_make_stub_cache.
3311 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3313 * aarch64-tdep.c (aarch64_make_prologue_cache): Update comment.
3314 New argument this_cache. Return early if this_cache is already
3315 set. Set this_cache.
3316 (aarch64_prologue_this_id): Update call to
3317 aarch64_make_prologue_cache.
3318 (aarch64_prologue_prev_register): Likewise.
3319 (aarch64_normal_frame_base): Likewise.
3321 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
3323 * c-valprint.c (c_val_print): Factor out memberptr printing code
3324 from c_val_print to ...
3325 (c_val_print_memberptr): ... this new function.
3327 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
3329 * c-valprint.c (c_val_print): Factor out int printing code to ...
3330 (c_val_print_int): ... this new function.
3332 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
3334 * c-valprint.c (c_val_print): Factor out struct and union
3335 printing code to ...
3336 (c_val_print_struct): ... this new function ...
3337 (c_val_print_union): ... and this new function.
3339 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
3341 * c-valprint.c (c_val_print): Factor out pointer printing code
3343 (c_val_print_ptr): ... this new function.
3345 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
3347 * c-valprint.c (c_valprint): Factor our array printing code from
3349 (c_val_print_array): ... this new function.
3351 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
3353 * c-valprint.c (c_val_print): Factor out pointer printing code
3355 (print_unpacked_pointer): ... this new function.
3357 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
3359 * c-valprint.c (c_val_print): Remove an assignment to i and move
3362 2015-07-09 Yao Qi <yao.qi@linaro.org>
3364 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity): Add
3365 argument ptid. Update comments. Caller update.
3367 2015-07-09 Markus Metzger <markus.t.metzger@intel.com>
3369 * btrace.c (pt_print_packet): Print stop, vmcs, tma, mtc, cyc, and
3372 2015-07-09 Markus Metzger <markus.t.metzger@intel.com>
3374 * btrace.c (btrace_pt_readmem_callback): Change type of PC argument.
3376 2015-07-08 Simon Marchi <simon.marchi@ericsson.com>
3378 * progspace.c (delete_program_space): Add missing spaces.
3380 2015-07-08 Simon Marchi <simon.marchi@ericsson.com>
3382 * inferior.c (delete_inferior_1): Rename to ...
3383 (delete_inferior): ..., remove 'silent' parameter, delete
3384 program space when unused and remove call to prune_program_spaces.
3385 Remove the old, unused, delete_inferior.
3386 (delete_inferior_silent): Remove.
3387 (prune_inferiors): Change call from delete_inferior_1 to
3388 delete_inferior and remove 'silent' parameter. Remove call to
3389 prune_program_spaces.
3390 (remove_inferior_command): Idem.
3391 * inferior.h (delete_inferior_1): Rename to...
3392 (delete_inferior): ..., remove 'silent' parameter and remove the
3393 original delete_inferior.
3394 (delete_inferior_silent): Remove.
3395 * mi/mi-main.c (mi_cmd_remove_inferior): Change call from
3396 delete_inferior_1 to delete_inferior and remove 'silent'
3398 * progspace.c (prune_program_spaces): Remove.
3399 (pspace_empty_p): Rename to...
3400 (program_space_empty_p): ... and make non-static.
3401 (delete_program_space): New.
3402 * progspace.h (prune_program_spaces): Remove declaration.
3403 (program_space_empty_p): New declaration.
3404 (delete_program_space): New declaration.
3405 * monitor.c (monitor_close): Replace call to
3406 delete_thread_silent and delete_inferior_silent with
3407 discard_all_inferiors.
3409 2015-07-08 Patrick Palka <patrick@parcs.ath.cx>
3411 * defs.h (deprecated_register_changed_hook): Remove prototype.
3412 * interps.c (clear_iterpreter_hooks): Remove reference to
3413 deprecated_register_changed_hook.
3414 * top.c (deprecated_register_changed_hook): Remove prototype.
3415 * valops.c (value_assign): Remove reference to
3416 deprecated_register_changed_hook.
3417 * tui/tui-hooks.c (tui_register_changed): Add parameter "frame".
3418 Add comment documenting the function.
3419 (tui_register_changed_observer): Define.
3420 (tui_install_hooks): Remove reference to
3421 deprecated_register_changed_hook. Set
3422 tui_register_changed_observer.
3423 (tui_remove_hooks): Remove reference to
3424 deprecated_register_changed_hook. Unset
3425 tui_register_changed_observer.
3427 2015-07-08 Jan Kratochvil <jan.kratochvil@redhat.com>
3430 * compile/compile-c-types.c (insert_type): Change gdb_assert to error.
3432 2015-07-08 Robert O'Callahan <robert@ocallahan.org>
3435 * ax-gdb.c (gen_conversion): Extend to 'to' bits, not 'from'.
3437 2015-07-08 Markus Metzger <markus.t.metzger@intel.com>
3439 * MAINTAINERS (Write After Approval): Add Markus T. Metzger.
3441 2015-07-08 Markus Metzger <markus.t.metzger@intel.com>
3443 * nat/linux-btrace.c (kernel_supports_bts, kernel_supports_pt):
3444 Use safe_strerror() instead of strerror().
3446 2015-07-07 Yao Qi <yao.qi@linaro.org>
3448 * features/arm-with-m-fpa-layout.xml: Set architecture to arm.
3449 * features/arm-with-m-fpa-layout.c: Regenerated.
3450 * features/arm-with-m-vfp-d16.xml: Likewise.
3451 * features/arm-with-m-vfp-d16.c: Regenerated.
3452 * features/arm-with-m.xml: Likewise.
3453 * features/arm-with-m.c: Regenerated.
3454 * features/arm-with-neon.xml: Likewise.
3455 * features/arm-with-neon.c: Regenerated.
3456 * features/arm-with-vfpv2.xml: Likewise.
3457 * features/arm-with-vfpv2.c: Regenerated.
3458 * features/arm-with-vfpv3.xml: Likewise.
3459 * features/arm-with-vfpv3.c: Regenerated.
3461 2015-07-07 Yao Qi <yao.qi@linaro.org>
3463 * aarch32-linux-nat.h (VFP_REGS_SIZE): New macro, moved from
3465 * aarch64-linux-nat.c: Include aarch32-linux-nat.h and
3467 (fetch_gregs_from_thread): Call aarch32_gp_regcache_supply
3468 if target is 32-bit.
3469 (store_gregs_to_thread): Call aarch32_gp_regcache_collect
3470 if target is 32-bit.
3471 (fetch_fpregs_from_thread): Call aarch32_vfp_regcache_supply
3472 if target is 32-bit.
3473 (store_fpregs_to_thread): Call aarch32_vfp_regcache_collect
3474 if target is 32-bit.
3475 (tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare.
3476 (aarch64_linux_read_description): Return the right target
3478 * arm-linux-nat.c (VFP_REGS_SIZE): Moved to aarch32-linux-nat.h.
3479 * config/aarch64/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o.
3480 * configure.tgt (aarch64*-*-linux*): Add arm-tdep.o and
3483 2015-07-07 Yao Qi <yao.qi@linaro.org>
3485 * aarch32-linux-nat.c: New file.
3486 * aarch32-linux-nat.h: New file.
3487 * arm-linux-nat.c: Include aarch32-linux-nat.h.
3488 (fetch_regs): Move code to aarch32-linux-nat.c. Call
3489 aarch32_gp_regcache_supply.
3490 (store_regs): Move code to aarch32-linux-nat.c. Call
3491 aarch32_gp_regcache_collect.
3492 (fetch_vfp_regs): Move code to aarch32-linux-nat.c. Call
3493 aarch32_vfp_regcache_supply.
3494 (store_vfp_regs): Move code to aarch32-linux-nat.c. Call
3495 aarch32_vfp_regcache_collect.
3496 * config/arm/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o.
3498 2015-07-07 Yao Qi <yao.qi@linaro.org>
3500 * arm-linux-nat.c (store_fpregister): Remove.
3501 (store_register): Likewise.
3502 (fetch_fpregister): Likewise.
3503 (fetch_register): Likewise.
3504 (arm_linux_store_inferior_registers): Call store_regs and
3505 store_fpregs instead.
3506 (arm_linux_fetch_inferior_registers): Call fetch_fpregs and
3509 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
3511 * doc/gdb.texinfo (TUI): Restructure documentation on TUI layout
3514 2015-07-06 Joel Brobecker <brobecker@adacore.com>
3516 * NEWS: Create a new section for the next release branch.
3517 Rename the section of the current branch, now that it has
3520 2015-07-06 Joel Brobecker <brobecker@adacore.com>
3522 GDB 7.10 branch created (66c4b3e8a628a207bc6aafef6af0c4128195f56e):
3523 * version.in: Bump version to 7.10.50.DATE-cvs.
3525 2015-07-06 Luis Machado <lgustavo@codesourcery.com>
3527 * breakpoint.c (remove_breakpoint_1): Don't handle permanent
3528 breakpoints in a special way.
3529 (remove_breakpoint): Likewise.
3530 (mark_breakpoints_out): Likewise.
3532 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
3534 * doc/gdb.texinfo (TUI): Add comma after @xref.
3536 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
3538 * tui/tui-win.c (tui_set_focus): Use structure member 'generic'
3539 instead of casting the structure type.
3541 2015-07-06 Simon Marchi <simon.marchi@ericsson.com>
3543 * valops.c (search_struct_field): Remove OFFSET parameter.
3544 (value_cast_structs): Adjust calls to search_struct_field.
3545 (value_struct_elt): Same.
3546 (find_overload_match): Same.
3548 2015-07-06 Simon Marchi <simon.marchi@ericsson.com>
3550 * value.c (value_fetch_lazy): Update comment, change return
3552 * value.h (value_fetch_lazy): Change return value to void.
3554 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
3556 * tui/tui-data.c (tui_partial_win_by_name): Window name is const.
3557 (tui_win_name): Make parameter and result const.
3558 * tui/tui-data.h (tui_win_name): Make parameter and result const.
3560 2015-07-06 Patrick Palka <patrick@parcs.ath.cx>
3562 * i386-tdep.c (i386_mpx_info_bounds): Don't call error, instead
3563 use printf_unfiltered.
3564 (set_mpx_cmd): Add missing trailing space to command string
3566 (_initialize_i386_tdep): Give the "mpx" prefix command its
3569 2015-07-02 Kevin Buettner <kevinb@redhat.com>
3571 * rx-tdep.c (RX_USP_REGNUM, RX_BPC_REGNUM): New constants.
3572 (enum rx_frame_type): New.
3573 (struct rx_prologue): Add new field `frame_type'.
3574 (rx_analyze_prologue): Add `frame_type' parameter. Cache this
3575 parameter in the prologue struct. Add code for recording
3576 locations of PC and PSW for fast interrupt and exception frames.
3577 (rx_skip_prologue): Adjust call to rx_analyze_prologue.
3578 (rx_analyze_frame_prologue): Add `frame_type' parameter.
3579 (rx_frame_type): New function.
3580 (rx_frame_base): Fetch frame type and pass it to rx_analyze_prologue.
3581 (rx_frame_this_id): Rename parameter `this_prologue_cache' to
3583 (rx_frame_prev_register): Rename parameter `this_prologue_cache' to
3584 `this_cache'. Add cases for RX_FRAME_TYPE_EXCEPTION and
3585 RX_FRAME_TYPE_FAST_INTERRUPT.
3586 (normal_frame_p, exception_frame_p, rx_frame_sniffer_common)
3587 (rx_frame_sniffer, rx_exception_sniffer): New functions.
3588 (rx_frame_unwind): Use rx_frame_sniffer instead of
3589 default_frame_sniffer.
3590 (rx_frame_unwind): New unwinder.
3591 (rx_gdbarch_init): Register new unwinder.
3593 2015-07-02 Kevin Buettner <kevinb@redhat.com>
3595 * rx-tdep.c (RX_BPSW_REGNUM, RX_FPSW_REGNUM): New constants.
3596 (struct gdbarch_tdep): Add fields rx_psw_type and rx_fpsw_type.
3597 (rx_register_type): Add cases for RX_PSW_REGNUM, RX_BPSW_REGNUM,
3599 (rx_gdbarch_init): Initialize PSW, BPSW, and FPSW flags types.
3601 2015-07-02 Jan Kratochvil <jan.kratochvil@redhat.com>
3603 Fix GCC false warning.
3604 * s390-linux-tdep.c (s390_handle_arg): Initialize VAL.
3606 2015-07-02 Yao Qi <yao.qi@linaro.org>
3608 * aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Fix
3609 typo in the debugging message.
3611 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
3613 * btrace.c: Include gdbcmd.h, cli/cli-utils.h, and ctype.h.
3614 (maint_btrace_cmdlist, maint_btrace_set_cmdlist)
3615 (maint_btrace_show_cmdlist, maint_btrace_pt_set_cmdlist)
3616 (maint_btrace_pt_show_cmdlist, maint_btrace_pt_skip_pad)
3617 (btrace_maint_clear): New.
3618 (btrace_fetch, btrace_clear): Call btrace_maint_clear.
3619 (pt_print_packet, btrace_maint_decode_pt)
3620 (btrace_maint_update_pt_packets, btrace_maint_update_packets)
3621 (btrace_maint_print_packets, get_uint, get_context_size, no_chunk)
3622 (maint_btrace_packet_history_cmd)
3623 (maint_btrace_clear_packet_history_cmd, maint_btrace_clear_cmd)
3624 (maint_btrace_cmd, maint_btrace_set_cmd, maint_btrace_show_cmd)
3625 (maint_btrace_pt_set_cmd, maint_btrace_pt_show_cmd)
3626 (maint_info_btrace_cmd, _initialize_btrace): New.
3627 * btrace.h (btrace_pt_packet, btrace_pt_packet_s)
3628 (btrace_maint_packet_history, btrace_maint_info): New.
3629 (btrace_thread_info) <maint>: New.
3630 * NEWS: Announce it.
3632 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
3634 * btrace.c (btrace_fetch): Append the new trace data.
3635 (btrace_clear): Clear the stored trace data.
3636 * btrace.h (btrace_thread_info) <data>: New.
3637 * common/btrace-common.h (btrace_data_clear)
3638 (btrace_data_append): New.
3639 * common/btrace-common.c (btrace_data_clear)
3640 (btrace_data_append): New.
3642 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
3644 * nat/linux-btrace.c (linux_enable_bts): Check for
3645 PERF_ATTR_SIZE_VER5.
3646 Check for data_offset and data_size fields. Use them.
3648 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
3650 * NEWS: Announce new commands "record btrace pt" and "record pt".
3651 Announce new options "set|show record btrace pt buffer-size".
3652 * btrace.c: Include "rsp-low.h".
3653 Include "inttypes.h".
3654 (btrace_add_pc): Add forward declaration.
3655 (pt_reclassify_insn, ftrace_add_pt, btrace_pt_readmem_callback)
3656 (pt_translate_cpu_vendor, btrace_finalize_ftrace_pt)
3657 (btrace_compute_ftrace_pt): New.
3658 (btrace_compute_ftrace): Support BTRACE_FORMAT_PT.
3659 (check_xml_btrace_version): Update version check.
3660 (parse_xml_raw, parse_xml_btrace_pt_config_cpu)
3661 (parse_xml_btrace_pt_raw, parse_xml_btrace_pt)
3662 (btrace_pt_config_cpu_attributes, btrace_pt_config_children)
3663 (btrace_pt_children): New.
3664 (btrace_children): Add support for "pt".
3665 (parse_xml_btrace_conf_pt, btrace_conf_pt_attributes): New.
3666 (btrace_conf_children): Add support for "pt".
3667 * btrace.h: Include "intel-pt.h".
3668 (btrace_pt_error): New.
3669 * common/btrace-common.c (btrace_format_string, btrace_data_fini)
3670 (btrace_data_empty): Support BTRACE_FORMAT_PT.
3671 * common/btrace-common.h (btrace_format): Add BTRACE_FORMAT_PT.
3672 (struct btrace_config_pt): New.
3673 (struct btrace_config)<pt>: New.
3674 (struct btrace_data_pt_config, struct btrace_data_pt): New.
3675 (struct btrace_data)<pt>: New.
3676 * features/btrace-conf.dtd (btrace-conf)<pt>: New.
3678 * features/btrace.dtd (btrace)<pt>: New.
3679 (pt, pt-config, cpu): New.
3680 * nat/linux-btrace.c (perf_event_read, perf_event_read_all)
3681 (perf_event_pt_event_type, kernel_supports_pt)
3682 (linux_supports_pt): New.
3683 (linux_supports_btrace): Support BTRACE_FORMAT_PT.
3684 (linux_enable_bts): Free tinfo on error.
3685 (linux_enable_pt): New.
3686 (linux_enable_btrace): Support BTRACE_FORMAT_PT.
3687 (linux_disable_pt): New.
3688 (linux_disable_btrace): Support BTRACE_FORMAT_PT.
3689 (linux_fill_btrace_pt_config, linux_read_pt): New.
3690 (linux_read_btrace): Support BTRACE_FORMAT_PT.
3691 * nat/linux-btrace.h (struct btrace_tinfo_pt): New.
3692 (struct btrace_target_info)<pt>: New.
3693 * record-btrace.c (set_record_btrace_pt_cmdlist)
3694 (show_record_btrace_pt_cmdlist): New.
3695 (record_btrace_print_pt_conf): New.
3696 (record_btrace_print_conf): Support BTRACE_FORMAT_PT.
3697 (btrace_ui_out_decode_error): Support BTRACE_FORMAT_PT.
3698 (cmd_record_btrace_pt_start): New.
3699 (cmd_record_btrace_start): Support BTRACE_FORMAT_PT.
3700 (cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): New.
3701 (_initialize_record_btrace): Add new commands.
3702 * remote.c (PACKET_Qbtrace_pt, PACKET_Qbtrace_conf_pt_size): New.
3703 (remote_protocol_features): Add "Qbtrace:pt".
3704 Add "Qbtrace-conf:pt:size".
3705 (remote_supports_btrace): Support BTRACE_FORMAT_PT.
3706 (btrace_sync_conf): Support PACKET_Qbtrace_conf_pt_size.
3707 (remote_enable_btrace): Support BTRACE_FORMAT_PT.
3708 (_initialize_remote): Add new commands.
3710 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
3712 * configure.ac: check for libipt
3713 * configure: Regenerate.
3714 * config.in: Regenerate.
3715 * Makefile.in (LIBIPT): New.
3716 (CLIBS): Add $LIBIPT.
3717 * NEWS: document new configure options
3719 2015-07-02 Jan Kratochvil <jan.kratochvil@redhat.com>
3721 * compile/compile-object-load.c (compile_object_load): Replace debug
3722 message "lookup undefined ELF symbol" by 3 more specific messages.
3724 2015-07-01 Kevin Buettner <kevinb@redhat.com>
3726 * rl78-tdep.c (struct gdbarch_tdep): Add new field, rl78_psw_type.
3727 (rl78_register_type): Add case for RL78_PSW_REGNUM.
3728 (rl78_gdbarch_init): Initialize rl78_psw_type.
3730 2015-07-01 Patrick Palka <patrick@parcs.ath.cx>
3732 * tui/tui-hooks.c (tui_refresh_frame_and_register_information):
3733 Update commentary. Always refresh the registers when frame
3734 information has changed.
3735 * tui/tui-stack.c (tui_show_frame_info): Update commentary.
3736 Change return type to int. Return 1 if frame information has
3737 changed, 0 otherwise.
3738 (tui_before_prompt): Update commentary.
3739 * tui/tui-stack.h (tui_show_frame_info): Change return type to
3742 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
3745 * frame.c (select_frame): Remove reference to
3746 deprecated_selected_frame_level_changed_hook.
3747 * frame.h (deprecated_selected_frame_level_changed_hook): Remove
3749 * stack.c (deprecated_selected_frame_level_changed_hook):
3751 * tui/tui-hooks.c (tui_selected_frame_level_changed_hook):
3753 (tui_refresh_frame_and_register_information): ... this. Bail
3754 out if there is no stack. Don't update register information
3755 unless registers_too_p is true.
3756 (tui_print_frame_info_listing_hook): Rename to ...
3757 (tui_dummy_print_frame_info_listing_hook): ... this.
3758 (tui_before_prompt): New function.
3759 (tui_normal_stop): New function.
3760 (tui_before_prompt_observer): New observer.
3761 (tui_normal_stop_observer): New observer.
3762 (tui_install_hooks): Set
3763 deprecated_print_frame_info_listing_hook to
3764 tui_dummy_print_frame_info_listing_hook. Register
3765 tui_before_prompt_observer to call tui_before_prompt and
3766 tui_normal_stop_observer to call tui_normal_stop. Remove
3767 reference to deprecated_selected_frame_level_changed_hook.
3768 (tui_remove_hooks): Detach and unset tui_before_prompt_observer
3769 and tui_normal_stop_observer. Remove reference to
3770 deprecated_selected_frame_level_changed_hook.
3772 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
3775 * tui/tui-stack.c (tui_set_locator_info): Change prototype to
3776 return an int instead of void. Return whether the locator
3778 (tui_show_frame_info): If the locator info has not changed, then
3779 bail out early to avoid refreshing the windows.
3781 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
3783 * tui/tui-stack.c (tui_set_locator_info): Explicitly pass
3784 LOCATOR_WIN to tui_alloc_content.
3786 2015-06-30 Yao Qi <yao.qi@linaro.org>
3789 * arm-tdep.c (arm_get_next_pc_raw): Break for media
3792 2015-06-29 Kevin Buettner <kevinb@redhat.com>
3794 * rx-tdep.c (RX_PSW_REGNUM): New enum constant.
3795 (rx_dwarf_reg_to_regnum): New function.
3796 (rx_gdbarch_init): Register rx_dwarf_reg_to_regnum. Use dwarf2
3799 2015-06-29 Pedro Alves <palves@redhat.com>
3802 * infcall.c (run_inferior_call): On infcall success, if the thread
3803 was marked stopped before, reset it back to stopped.
3804 * infrun.c (resume): Don't suppress the set_running calls when
3806 (normal_stop): Only discard the finish_thread_state cleanup if the
3809 2015-06-29 Pierre Langlois <pierre.langlois@arm.com>
3811 * MAINTAINERS (Write After Approval): Update my email address.
3813 2015-06-26 Keith Seitz <keiths@redhat.com>
3814 Doug Evans <dje@google.com>
3817 * block.c (block_lookup_symbol): For non-function blocks,
3818 continue to search for a symbol with an exact domain match
3819 Otherwise, return any previously found "best domain" symbol.
3820 (block_lookup_symbol_primary): Likewise.
3822 2015-06-26 Patrick Palka <patrick@parcs.ath.cx>
3824 * NEWS: Mention the new option "history remove-duplicates".
3825 * top.c (history_remove_duplicates): New static variable.
3826 (show_history_remove_duplicates): New static function.
3827 (gdb_add_history): Conditionally remove duplicate history
3829 (init_main): Add "history remove-duplicates" option.
3831 2015-06-26 Patrick Palka <patrick@parcs.ath.cx>
3833 * tui/tui-win.c (focus_completer): New static function.
3834 (_initialize_tui_win): Set the completion function of the
3835 "focus" command to focus_completer.
3837 2015-06-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3839 * linespec.c (minsym_found): Reset sal.PC for COMPUNIT_LOCATIONS_VALID
3841 * symtab.c (find_function_start_sal): Likewise.
3843 2015-06-25 Gary Benson <gbenson@redhat.com>
3845 * solib.c (solib_find_1): Set local variable sysroot to NULL if
3846 it is the empty string after trailing slashes have been stripped.
3848 2015-06-25 Gary Benson <gbenson@redhat.com>
3850 * exec.c (exec_file_locate_attach): Remove gdb_sysroot NULL check.
3851 * infrun.c (follow_exec): Likewise.
3852 * remote.c (remote_filesystem_is_local): Likewise.
3853 * solib.c (solib_find_1): Likewise.
3855 2015-06-24 Keith Seitz <keiths@redhat.com>
3857 * build-id.c (build_id_to_debug_bfd): Add cleanup to free
3858 return value from lrealpath.
3860 2015-06-24 Mike Frysinger <vapier@gentoo.org>
3862 * remote-sim.c (gdbsim_open): Move sysroot update to the top.
3864 2015-06-24 Mike Frysinger <vapier@gentoo.org>
3866 * remote-sim.c: Include gdb_bfd.h.
3867 (gdbsim_open): Declare new local sysroot pointing to gdb_sysroot.
3868 Skip TARGET_SYSROOT_PREFIX in gdb_sysroot when it is active.
3870 2015-06-24 Yao Qi <yao.qi@linaro.org>
3872 * aarch64-linux-tdep.c (aarch64_linux_init_abi): Don't call
3873 set_gdbarch_get_siginfo_type.
3874 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Likewise.
3875 * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
3876 * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
3877 * m68klinux-tdep.c (m68k_linux_init_abi): Likewise.
3878 * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
3879 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
3880 * tilegx-linux-tdep.c (tilegx_linux_init_abi): Likewise.
3881 * linux-tdep.c (linux_get_siginfo_type): Change it to static.
3882 (linux_init_abi): Call set_gdbarch_get_siginfo_type.
3883 * linux-tdep.h (linux_get_siginfo_type): Remove the declaration.
3885 2015-06-24 Gary Benson <gbenson@redhat.com>
3887 * common/buffer.c (stdint.h): Do not include.
3888 * common/print-utils.c (stdint.h): Likewise.
3889 * compile/compile-c-symbols.c (gdb_assert.h): Likewise.
3890 * compile/compile-c-types.c (gdb_assert.h): Likewise.
3891 * ft32-tdep.c (gdb_assert.h): Likewise.
3892 * guile/scm-utils.c (stdint.h): Likewise.
3893 * i386-linux-tdep.c (stdint.h): Likewise.
3894 * i386-tdep.c (stdint.h): Likewise.
3895 * nat/linux-btrace.c (stdint.h): Likewise.
3896 * nat/linux-btrace.h (stdint.h): Likewise.
3897 * nat/linux-ptrace.c (stdint.h): Likewise.
3898 * nat/mips-linux-watch.h (stdint.h): Likewise.
3899 * ppc-linux-nat.c (stdint.h): Likewise.
3900 * python/python-internal.h (stdint.h): Likewise.
3901 * stub-termcap.c (stdlib.h): Likewise.
3902 * target/target.h (stdint.h): Likewise.
3903 * xtensa-linux-nat.c (stdint.h): Likewise.
3905 2015-06-23 Patrick Palka <patrick@parcs.ath.cx>
3907 * top.c (init_history): Look at errno after calling strtol to
3908 properly map large GDBHISTSIZE values to infinity.
3910 2015-06-23 Doug Evans <dje@google.com>
3912 * inferior.h (struct inferior_suspend_state): Delete, unused.
3913 All references deleted.
3915 2015-06-23 Mike Frysinger <vapier@gentoo.org>
3917 * microblaze-tdep.c (microblaze_push_dummy_code): Delete.
3918 (microblaze_push_dummy_call): Likewise.
3919 (microblaze_gdbarch_init): Delete calls to set_gdbarch_push_dummy_code
3920 and set_gdbarch_push_dummy_call.
3922 2015-06-23 Yao Qi <yao.qi@linaro.org>
3924 * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers):
3925 Check whether have_ptrace_getregset is TRIBOOL_TRUE explicitly.
3926 (amd64_linux_store_inferior_registers): Likewise.
3927 * arm-linux-nat.c (fetch_fpregister): Likewise.
3928 (fetch_fpregs, store_fpregister): Likewise.
3929 (store_fpregister, store_fpregs): Likewise.
3930 (fetch_register, fetch_regs): Likewise.
3931 (store_register, store_regs): Likewise.
3932 (fetch_vfp_regs, store_vfp_regs): Likewise.
3933 (arm_linux_read_description): Check have_ptrace_getregset is
3934 TRIBOOL_UNKNOWN. Set have_ptrace_getregset to TRIBOOL_TRUE
3936 * i386-linux-nat.c (fetch_xstateregs): Check
3937 have_ptrace_getregset is not TRIBOOL_TRUE.
3938 (store_xstateregs): Likewise.
3939 * linux-nat.c (have_ptrace_getregset): Change its type to
3941 * linux-nat.h (tribool): New enum.
3942 * x86-linux-nat.c (x86_linux_read_description): Use enum tribool.
3943 Check whether have_ptrace_getregset is TRIBOOL_TRUE.
3945 2015-06-19 Doug Evans <dje@google.com>
3947 * NEWS: Mention Sun's version of stabs is no longer supported.
3948 * elfread.c (free_elfinfo): Delete. All uses updated.
3949 (elfstab_offset_sections): Delete. All uses updated.
3950 * gdb-stabs.h (stab_section_info): Delete. All uses updated.
3951 * psympriv.h (partial_symtab) <section_offsets>: Delete.
3953 * psymtab.c (start_psymtab_common): Delete arg section_offsets.
3954 All callers updated.
3956 2015-06-18 Simon Marchi <simon.marchi@ericsson.com>
3958 * common/rsp-low.c (needs_escaping): New.
3959 (remote_escape_output): Add unit_size parameter. Refactor to
3960 support multi-byte addressable units. Rename parameters.
3961 * common/rsp-low.h (remote_escape_output): Add unit_size
3962 parameter and rename others. Update doc.
3963 * remote.c (align_for_efficient_write): New.
3964 (remote_write_bytes_aux): Add unit_size parameter and use it.
3965 Rename some variables. Update doc.
3966 (remote_xfer_partial): Get unit size and use it.
3967 (remote_read_bytes_1): Add unit_size parameter and use it.
3968 Rename some variables. Update doc.
3969 (remote_write_bytes): Same.
3970 (remote_xfer_live_readonly_partial): Same.
3971 (remote_read_bytes): Same.
3972 (remote_flash_write): Update call to remote_write_bytes_aux.
3973 (remote_write_qxfer): Update call to remote_escape_output.
3974 (remote_search_memory): Same.
3975 (remote_hostio_pwrite): Same.
3977 2015-06-17 Luis Machado <lgustavo@codesourcery.com>
3979 * breakpoint.c (add_location_to_breakpoint): Don't mark permanent
3980 locations as inserted.
3981 Update and expand comment about permanent locations.
3982 (bp_loc_is_permanent): Don't return 0 for bp_call_dummy.
3983 Move comment to add_location_to_breakpoint.
3984 (update_global_location_list): Don't error out if a permanent
3985 breakpoint is not marked inserted.
3986 Don't error out if a non-permanent breakpoint location is inserted on
3987 top of a permanent breakpoint.
3989 2015-06-17 Luis Machado <lgustavo@codesourcery.com>
3991 * breakpoint.c (make_breakpoint_permanent): Remove unused
3993 * breakpoint.h (make_breakpoint_permanent): Remove declaration.
3995 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
3998 * NEWS: Mention new GDBHISTSIZE behavior.
3999 * top.c (init_history): For null or out-of-range GDBHISTSIZE,
4000 set history size to unlimited. Ignore non-numeric GDBHISTSIZE.
4002 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
4004 * NEWS: Mention that GDBHISTSIZE is read instead of HISTSIZE.
4005 * top.c (init_history): Read from GDBHISTSIZE instead of
4007 (init_main): Refer to GDBHISTSIZE instead of HISTSIZE.
4009 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
4011 * top.c (gdb_safe_append_history): Do not call
4012 history_truncate_file if the history is not stifled.
4014 2015-06-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
4016 * syscalls/s390-linux.xml: Add syscalls 344 through 354.
4017 * syscalls/s390x-linux.xml: Likewise.
4019 2015-06-16 Michael Eager <eager@eagercon.com>
4021 * nat/linux-namespaces.c (MSG_CMSG_CLOEXEC): Define if not defined.
4023 2015-06-16 Patrick Palka <patrick@parcs.ath.cx>
4025 * tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Call
4026 target_terminal_ours_for_output() before calling
4027 tui_show_frame_info(), and restore the original terminal
4028 settings afterwards.
4030 2015-06-16 Martin Simmons <martin@lispworks.com> (tiny patch)
4032 * arm-linux-nat.c: Include nat/linux-ptrace.h.
4034 2015-06-15 Simon Marchi <simon.marchi@ericsson.com>
4036 * mi/mi-main.c (mi_cmd_data_read_memory_bytes): Consider addressable
4038 (mi_cmd_data_write_memory_bytes): Same.
4040 2015-06-15 Simon Marchi <simon.marchi@ericsson.com>
4042 * corefile.c (write_memory): Update doc.
4043 * gdbcore.h (write_memory): Same.
4045 2015-06-15 Jan Kratochvil <jan.kratochvil@redhat.com>
4047 * linux-tdep.c (enum filterflags): Make it from anonymous enum.
4048 (dump_mapping_p): Use it for parameter filterflags.
4049 (linux_find_memory_regions_full): Use it for variable filterflags.
4051 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
4052 Jan Kratochvil <jan.kratochvil@redhat.com>
4054 Merge multiple hex conversions.
4055 * monitor.c: Include rsp-low.h.
4056 (fromhex): Remove definition.
4058 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
4059 Jan Kratochvil <jan.kratochvil@redhat.com>
4061 Move utility functions to common/.
4062 * cli/cli-utils.c (skip_spaces, skip_spaces_const, skip_to_space_const):
4063 Move defs to common/common-utils.c.
4064 * cli/cli-utils.h (skip_spaces, skip_spaces_const, skip_to_space)
4065 (skip_to_space_const): Move decls to common/common-utils.h.
4066 * common/common-defs.h: Move include of common-types.h before
4068 * common/common-utils.c: Include host-defs.h and ctype.h.
4069 (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int, strtoulst): Move
4071 (skip_spaces, skip_spaces_const, skip_to_space_const): Move from
4073 * common/common-utils.h (strtoulst): Move decl from utils.h.
4074 (skip_spaces, skip_spaces_const, skip_to_space, skip_to_space_const):
4075 Move from cli/cli-utils.h.
4076 * common/host-defs.h: Include limits.h.
4077 (TARGET_CHAR_BIT, HOST_CHAR_BIT): Moved from defs.h.
4078 (skip_spaces, skip_spaces_const): Move decls from cli/cli-utils.h.
4079 * defs.h (TARGET_CHAR_BIT, HOST_CHAR_BIT): Move to
4080 common/common-utils.h.
4081 * utils.c (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int)
4082 (strtoulst): Move to common/common-utils.c.
4083 * utils.h (strtoulst): Moved decl to common/common-utils.h.
4085 2015-06-15 Yao Qi <yao.qi@linaro.org>
4087 * data-directory/Makefile.in (SYSCALLS_FILES): Add aarch64-linux.xml.
4089 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
4091 * build-id.c: Don't include elf-bfd.h.
4092 (build_id_bfd_get): Use bfd_build_id.
4093 (build_id_verify): Ditto.
4094 * build-id.h: Ditto.
4095 (find_separate_debug_file_by_buildid): Ditto.
4096 * python/py-objfile.c: Don't include elf-bfd.h.
4097 (objfpy_get_build_id) Use bfd_build_id.
4098 (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto.
4099 * coffread.c: Include build-id.h.
4100 (coff_symfile_read): Try find_separate_debug_file_by_buildid.
4102 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
4104 * windows-nat.c (do_windows_fetch_inferior_registers)
4105 (handle_output_debug_string): Replace __COPY_CONTEXT_SIZE
4106 conditional with __CYGWIN__.
4108 2015-06-13 Andrew Burgess <andrew.burgess@embecosm.com>
4110 * completer.c: Add arch-utils.h include.
4111 (enum reg_completer_targets): New enum.
4112 (reg_or_group_completer_1): New function containing old
4113 reg_or_group_completer, add and use new parameter to control what
4114 is completed on. Use get_current_arch rather than architecture of
4115 currently selected frame.
4116 (reg_or_group_completer): Call new reg_or_group_completer_1.
4117 (reggroup_completer): Call new reg_or_group_completer_1.
4118 * completer.h (reggroup_completer): Add declaration.
4119 * tui/tui-regs.c: Add 'completer.h' include.
4120 (tui_reg_next_command): Renamed to...
4121 (tui_reg_next): ...this. Adjust parameters and return rather than
4123 (tui_reg_prev_command): Renamed to...
4124 (tui_reg_prev): ...this. Adjust parameters and return rather than
4126 (tui_reg_float_command): Delete.
4127 (tui_reg_general_command): Delete.
4128 (tui_reg_system_command): Delete.
4129 (tui_reg_command): Rewrite to perform switching of register group.
4131 (tuireglist): Remove.
4132 (tui_reggroup_completer): New function.
4133 (_initialize_tui_regs): Remove 'tui reg' sub-commands, update
4134 creation of 'tui reg' command.
4135 * NEWS: Add comment about 'tui reg' changes.
4137 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
4139 * target.c (target_read): Consider addressable unit size when
4140 reading from a memory object.
4141 (read_memory_robust): Same.
4142 (read_whatever_is_readable): Same.
4143 (target_write_with_progress): Consider addressable unit size
4144 when writing to a memory object.
4145 * target.h (target_read): Update documentation.
4146 (target_write): Add documentation.
4148 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
4150 * arch-utils.h (default_addressable_memory_unit_size): New.
4151 * arch-utils.c (default_addressable_memory_unit_size): New.
4152 * gdbarch.sh (addressable_memory_unit_size): New.
4153 * gdbarch.h: Re-generate.
4154 * gdbarch.c: Re-generate.
4156 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
4158 * target.c (target_read): Rename variables and use
4160 (target_read_with_progress): Same.
4161 (read_memory_robust): Constify parameters and rename
4163 (read_whatever_is_readable): Constify parameters,
4164 rename variables, adjust formatting.
4165 * target.h (read_memory_robust): Constify parameters.
4167 2015-06-12 Ulrich Weigand <uweigand@de.ibm.com>
4169 * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value_base): Handle short
4170 synthetic (non-AltiVec) vector types.
4171 (ppc64_sysv_abi_return_value): Likewise.
4173 2015-06-12 Antoine Tremblay <antoine.tremblay@ericsson.com>
4175 PR breakpoints/16465
4176 * breakpoint.c (create_breakpoint): Save extra_string for
4177 pending breakpoints.
4179 2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
4181 * i386-tdep.c (i386_mpx_get_bt_entry): Add a cast for mpx_bd_mask
4182 and bt_mask to CORE_ADDR.
4184 2015-06-11 Gary Benson <gbenson@redhat.com>
4186 * nat/linux-namespaces.c (mnsh_send_message): Use pulongest.
4187 (mnsh_recv_message): Likewise.
4189 2015-06-11 Walfred Tedeschi <walfred.tedeschi@intel.com>
4191 * i386-tdep.c (i386_mpx_print_bounds): use of LONGEST instead of
4192 long long int and plongest instead of %ll.
4194 2015-06-11 Gary Benson <gbenson@redhat.com>
4196 * nat/linux-namespaces.c (gdb_wait.h): New include.
4197 (sys/wait.h): Do not include.
4199 2015-06-10 Simon Marchi <simon.marchi@ericsson.com>
4201 * dwarf2read.c (dwarf_record_line): Call dwarf_record_line if
4202 end_sequence is true.
4204 2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
4207 * solib-target.c (library_list_start_list): Use explicit NULL
4210 2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
4212 * solib-target.c (library_list_start_list): Do not dereference
4213 variable version in its initialization. Make the VERSION check handle
4215 (library_list_attributes): Make "version" GDB_XML_AF_OPTIONAL.
4217 2015-06-10 Gary Benson <gbenson@redhat.com>
4219 * NEWS: Announce support for direct access of executable and
4220 shared library files when attaching to inferiors in containers
4221 on GNU/Linux systems.
4223 2015-06-10 Gary Benson <gbenson@redhat.com>
4225 * remote.c (struct remote_state) <fs_pid>: New field.
4226 (new_remote_state): Initialize the above.
4227 (PACKET_vFile_setfs): New enum value.
4228 (remote_hostio_set_filesystem): New function.
4229 (remote_hostio_open): Call the above.
4230 (remote_hostio_unlink): Likewise.
4231 (remote_hostio_readlink): Likewise.
4232 (_initialize_remote): Register new "set/show remote
4233 hostio-setfs-packet" command.
4234 * NEWS: Announce new vFile:setfs packet.
4236 2015-06-10 Gary Benson <gbenson@redhat.com>
4238 * linux-nat.c (nat/linux-namespaces.h): New include.
4239 (fileio.h): Likewise.
4240 (linux_nat_filesystem_is_local): New function.
4241 (linux_nat_fileio_pid_of): Likewise.
4242 (linux_nat_fileio_open): Likewise.
4243 (linux_nat_fileio_readlink): Likewise.
4244 (linux_nat_fileio_unlink): Likewise.
4245 (linux_nat_add_target): Initialize to_filesystem_is_local,
4246 to_fileio_open, to_fileio_readlink and to_fileio_unlink.
4247 (_initialize_linux_nat): New "set/show debug linux-namespaces"
4249 * NEWS: Mention new "set/show debug linux-namespaces" commands.
4251 2015-06-10 Gary Benson <gbenson@redhat.com>
4253 * target.h (struct inferior): New forward declaration.
4254 (struct target_ops) <to_filesystem_is_local>: Update comment.
4255 (struct target_ops) <to_fileio_open>: New argument inf.
4256 Update comment. All implementations updated.
4257 (struct target_ops) <to_fileio_unlink>: Likewise.
4258 (struct target_ops) <to_fileio_readlink>: Likewise.
4259 (target_filesystem_is_local): Update comment.
4260 (target_fileio_open): New argument inf. Update comment.
4261 (target_fileio_unlink): Likewise.
4262 (target_fileio_readlink): Likewise.
4263 (target_fileio_read_alloc): Likewise.
4264 (target_fileio_read_stralloc): Likewise.
4265 * target.c (target_fileio_open): New argument inf.
4266 Pass inf to implementation. Update debug printing.
4267 (target_fileio_unlink): Likewise.
4268 (target_fileio_readlink): Likewise.
4269 (target_fileio_read_alloc_1): New argument inf. Pass inf
4270 to target_fileio_open.
4271 (target_fileio_read_alloc): New argument inf. Pass inf to
4272 target_fileio_read_alloc_1.
4273 (target_fileio_read_stralloc): Likewise.
4274 * gdb_bfd.c (inferior.h): New include.
4275 (gdb_bfd_iovec_fileio_open): Replace unused "open_closure"
4276 argument with new argument "inferior". Pass inferior to
4278 (gdb_bfd_open): Supply inferior argument to
4279 gdb_bfd_iovec_fileio_open.
4280 * linux-tdep.c (linux_info_proc): Supply inf argument to
4281 relevant target_fileio calls.
4282 (linux_find_memory_regions_full): Likewise.
4283 (linux_fill_prpsinfo): Likewise.
4284 * remote.c (remote_filesystem_is_local): Supply inf
4285 argument to remote_hostio_open.
4286 (remote_file_put): Likewise.
4287 (remote_file_get): Likewise.
4288 (remote_file_delete): Supply inf argument to
4289 remote_hostio_unlink.
4291 2015-06-10 Gary Benson <gbenson@redhat.com>
4293 * inf-child.c (inf_child_fileio_open): Replace comment.
4294 (inf_child_fileio_pwrite): Likewise.
4295 (inf_child_fileio_pread): Likewise.
4296 (inf_child_fileio_fstat): Insert blank line before comment.
4297 (inf_child_fileio_close): Replace comment.
4298 (inf_child_fileio_unlink): Likewise.
4299 (inf_child_fileio_readlink): Likewise.
4300 * remote.c (remote_hostio_open): Likewise.
4301 (remote_hostio_pread): Likewise.
4302 (remote_hostio_pwrite): Likewise.
4303 (remote_hostio_close): Likewise.
4304 (remote_hostio_unlink): Likewise.
4305 (remote_hostio_readlink): Likewise.
4306 (remote_hostio_fstat): Likewise.
4307 (remote_filesystem_is_local): Likewise.
4308 * target.c (target_fileio_open): Likewise.
4309 (target_fileio_pwrite): Likewise.
4310 (target_fileio_pread): Likewise.
4311 (target_fileio_fstat): Insert blank line before comment.
4312 (target_fileio_close): Replace comment.
4313 (target_fileio_unlink): Likewise.
4314 (target_fileio_readlink): Likewise.
4315 (target_fileio_read_alloc): Likewise.
4316 (target_fileio_read_stralloc): Likewise.
4318 2015-06-10 Gary Benson <gbenson@redhat.com>
4320 * linux-thread-db.c (nat/linux-namespaces.h): New include.
4321 (check_pid_namespace_match): Use linux_ns_same rather than
4322 linux_proc_pid_get_ns to spot PID namespace mismatches.
4323 * nat/linux-procfs.h (linux_proc_pid_get_ns): Remove.
4324 * nat/linux-procfs.c (linux_proc_pid_get_ns): Likewise.
4326 2015-06-10 Gary Benson <gbenson@redhat.com>
4328 * configure.ac (AC_CHECK_FUNCS): Add setns.
4329 * config.in: Regenerate.
4330 * configure: Likewise.
4331 * nat/linux-namespaces.h: New file.
4332 * nat/linux-namespaces.c: Likewise.
4333 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-namespaces.h.
4334 (linux-namespaces.o): New rule.
4335 * config/aarch64/linux.mh (NATDEPFILES): Add linux-namespaces.o.
4336 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
4337 * config/arm/linux.mh (NATDEPFILES): Likewise.
4338 * config/i386/linux.mh (NATDEPFILES): Likewise.
4339 * config/i386/linux64.mh (NATDEPFILES): Likewise.
4340 * config/ia64/linux.mh (NATDEPFILES): Likewise.
4341 * config/m32r/linux.mh (NATDEPFILES): Likewise.
4342 * config/m68k/linux.mh (NATDEPFILES): Likewise.
4343 * config/mips/linux.mh (NATDEPFILES): Likewise.
4344 * config/pa/linux.mh (NATDEPFILES): Likewise.
4345 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
4346 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
4347 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
4348 * config/s390/linux.mh (NATDEPFILES): Likewise.
4349 * config/sparc/linux.mh (NATDEPFILES): Likewise.
4350 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
4351 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
4352 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
4354 2015-06-10 Gary Benson <gbenson@redhat.com>
4356 * utils.h (make_cleanup_close): Moved to common/filestuff.h.
4357 * utils.c (do_close_cleanup): Moved to common/filestuff.c.
4358 (make_cleanup_close): Likewise.
4359 * common/filestuff.h (make_cleanup_close): Moved from utils.h.
4360 * common/filestuff.c (do_close_cleanup): Moved from utils.c.
4361 (make_cleanup_close): Likewise.
4363 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
4365 * windows-nat.c (thread_rec): Also ignore ERROR_INVALID_HANDLE
4366 from SuspendThread().
4368 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
4370 * windows-nat.c (handle_output_debug_string): Trim trailing '\n'
4371 from OutputDebugString.
4373 2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
4374 Mircea Gherzan <mircea.gherzan@intel.com>
4376 * i386-tdep.c (MPX_BASE_MASK, MPX_BD_MASK, MPX_BT_MASK, MPX_BD_MASK_32,
4377 MPX_BT_MASK_32): New macros.
4378 (i386_mpx_set_bounds): New function that implements
4379 the command "set-mpx-bound".
4380 (i386_mpx_enabled): Helper function to test MPX availability.
4381 (i386_mpx_bd_base): Helper function to calculate the base directory
4383 (i386_mpx_get_bt_entry): Helper function to access a bound
4385 (i386_mpx_print_bounds): Effectively display bound information.
4386 (_initialize_i386_tdep): Add new commands to commands "set mpx" and
4388 (_initialize_i386_tdep):
4389 Add "bound" to the commands "show mpx" and "set mpx" commands.
4390 (mpx_set_cmdlist and mpx_show_cmdlist): List for the new prefixed "set mpx"
4391 and "show mpx" commands.
4392 * NEWS: List new commands for MPX support.
4394 2015-06-09 Gary Benson <gbenson@redhat.com>
4396 * common/fileio.h (fileio_to_host_mode): New declaration.
4397 * common/fileio.c (fileio_to_host_mode): New Function.
4398 * inf-child.c (inf_child_fileio_open): Process mode argument
4399 with fileio_to_host_mode.
4401 2015-06-09 Gary Benson <gbenson@redhat.com>
4403 * common/fileio.c (fileio_mode_pack): Fix preprocessor
4406 2015-06-05 Gary Benson <gbenson@redhat.com>
4408 * gdb_bfd.c (gdb_bfd_open): Move vgdb special case to...
4409 * remote.c (remote_filesystem_is_local): ...here.
4411 2015-06-04 Yao Qi <yao.qi@linaro.org>
4413 * gdbarch.c: Regenerate it.
4415 2015-06-03 Jan Kratochvil <jan.kratochvil@redhat.com>
4417 * arch-utils.c (default_infcall_munmap): New.
4418 * arch-utils.h (default_infcall_munmap): New declaration.
4419 * compile/compile-object-load.c (struct munmap_list, munmap_list_add)
4420 (munmap_list_free, munmap_listp_free_cleanup): New.
4421 (struct setup_sections_data): Add field munmap_list_headp.
4422 (setup_sections): Call munmap_list_add.
4423 (compile_object_load): New variable munmap_list_head, initialize
4424 setup_sections_data.munmap_list_headp, return munmap_list_head.
4425 * compile/compile-object-load.h (struct munmap_list): New declaration.
4426 (struct compile_module): Add field munmap_list_head.
4427 (munmap_list_free): New declaration.
4428 * compile/compile-object-run.c (struct do_module_cleanup): Add field
4430 (do_module_cleanup): Call munmap_list_free.
4431 (compile_object_run): Pass munmap_list_head to do_module_cleanup.
4432 * gdbarch.c: Regenerate.
4433 * gdbarch.h: Regenerate.
4434 * gdbarch.sh (infcall_munmap): New.
4435 * linux-tdep.c (linux_infcall_munmap): New.
4436 (linux_init_abi): Install it.
4438 2015-06-02 Simon Marchi <simon.marchi@ericsson.com>
4441 * inferior.c (detach_inferior): Call exit_inferior_1 with silent = 0.
4443 2015-06-02 Yao Qi <yao.qi@linaro.org>
4445 * i386-linux-nat.c: Include linux-nat.h.
4447 2015-06-01 Andreas Schwab <schwab@linux-m68k.org>
4448 Jan Kratochvil <jan.kratochvil@redhat.com>
4451 * dwarf2-frame-tailcall.c (pretended_chain_levels): Correct
4453 * dwarf2loc.c (chain_candidate): Likewise.
4455 2015-06-01 Yao Qi <yao.qi@linaro.org>
4457 * arm-linux-nat.c (fetch_vfp_regs): Use PTRACE_GETREGSET.
4458 (store_vfp_regs): Use PTRACE_SETREGSET.
4460 2015-06-01 Yao Qi <yao.qi@linaro.org>
4462 * arm-linux-nat.c (fetch_fpregister): Use PTRACE_GETREGSET.
4463 (fetch_fpregs): Likewise.
4464 * arm-linux-nat.c (store_fpregister): Use PTRACE_SETREGSET.
4465 (store_fpregs): Likewise.
4467 2015-06-01 Yao Qi <yao.qi@linaro.org>
4469 * arm-linux-nat.c (fetch_register): Use PTRACE_GETREGSET.
4470 (fetch_regs): Likewise.
4471 (store_regs): Use PTRACE_SETREGSET.
4472 (store_register): Likewise.
4474 2015-06-01 Yao Qi <yao.qi@linaro.org>
4476 * arm-linux-nat.c (arm_linux_read_description): Check whether
4477 kernel supports PTRACE_GETREGSET.
4479 2015-06-01 Yao Qi <yao.qi@linaro.org>
4481 * x86-linux-nat.c (have_ptrace_getregset): Move it to ...
4482 * linux-nat.c: ... here.
4483 * x86-linux-nat.h (have_ptrace_getregset): Move the declaration
4485 * linux-nat.h: ... here.
4487 2015-06-01 Yao Qi <yao.qi@linaro.org>
4489 * amd64-linux-nat.c: Include "nat/linux-ptrace.h".
4490 * i386-linux-nat.c: Likewise.
4491 * nat/linux-ptrace.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Define.
4492 * s390-linux-nat.c: Include "nat/linux-ptrace.h".
4493 (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
4494 * x86-linux-nat.c: Include "nat/linux-ptrace.h".
4495 * x86-linux-nat.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
4497 2015-05-30 Eli Zaretskii <eliz@gnu.org>
4499 * go32-nat.c (go32_xfer_memory): Fix the return value to be
4500 compatible to what read_child and write_child return. This
4501 unbreaks that DJGPP build of GDB which was broken since v7.7.
4503 2015-05-29 Martin Galvan <martin.galvan@tallertechnologies.com>
4505 * MAINTAINERS (Write After Approval): Add Martin Galvan.
4507 2015-05-29 Roland McGrath <mcgrathr@google.com>
4510 * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Use warning
4511 rather than internal_error for an unrecognized value.
4513 2015-05-29 Max Filippov <jcmvbkbc@gmail.com>
4515 * xtensa-tdep.c (xtensa_pseudo_register_read)
4516 (xtensa_pseudo_register_write): Don't alias last pseudo register
4519 2015-05-28 Don Breazeal <donb@codesourcery.com>
4521 * infrun.c (follow_fork_inferior): Ensure the use of
4522 process-style ptids (pid,0,0) in verbose/debug "Detaching"
4525 2015-05-28 Doug Evans <dje@google.com>
4527 * dwarf2read.c (record_line_ftype): Remove, duplicate.
4529 2015-05-28 Yao Qi <yao.qi@linaro.org>
4531 * arm-linux-nat.c (arm_linux_has_wmmx_registers): Remove.
4532 (arm_linux_fetch_inferior_registers): Use
4533 tdep->have_wmmx_registers instead of arm_linux_has_wmmx_registers.
4534 (arm_linux_store_inferior_registers): Likewise.
4535 (arm_linux_read_description): Don't set
4536 arm_linux_has_wmmx_registers.
4537 * arm-tdep.c (arm_gdbarch_init): Set
4538 tdep->have_wmmx_registers according target descriptions.
4539 * arm-tdep.h (struct gdbarch_tdep) <have_wmmx_registers>: New
4542 2015-05-28 Yao Qi <yao.qi@linaro.org>
4544 * arm-linux-nat.c (arm_linux_vfp_register_count): Remove.
4545 (fetch_vfp_regs): Use vfp_register_count from gdbarch_tdep
4546 instead of arm_linux_vfp_register_count.
4547 (store_vfp_regs): Likewise.
4548 (arm_linux_fetch_inferior_registers): Likewise.
4549 (arm_linux_store_inferior_registers): Likewise.
4550 (arm_linux_read_description): Don't set
4551 arm_linux_vfp_register_count.
4552 * arm-linux-tdep.c (arm_linux_iterate_over_regset_sections):
4554 * arm-tdep.c (arm_gdbarch_init): Add assert on
4556 * arm-tdep.h (struct gdbarch_tdep) <have_vfp_registers>: Rename
4557 field to vfp_register_count. All users updated.
4559 2015-05-28 Kyle Huey <me@kylehuey.com> (tiny patch)
4561 * gdb/arm-tdep.c (arm_gdbarch_init): Perform arm_abi detection on
4562 ELFOSABI_GNU binaries.
4564 2015-05-27 Doug Evans <dje@google.com>
4566 * dwarf2read.c (lnp_state_machine): New typedef.
4567 (lnp_reader_state): New typedef.
4568 (dwarf_record_line_1): Renamed from dwarf_record_line.
4569 All callers updated.
4570 (dwarf_record_line): New function.
4571 (init_lnp_state_machine): New function.
4572 (check_line_address): Replace p_record_line parameter with state.
4573 All callers updated.
4574 (dwarf_decode_lines_1): Call dwarf_record_line, init_lnp_state_machine.
4575 Update to record state in lnp_state_machine.
4577 2015-05-27 Doug Evans <dje@google.com>
4579 * dwarf2read.c (record_line_ftype): New typedef.
4580 (check_line_address): New function.
4581 (dwarf_decode_lines_1): Call it.
4583 2015-05-27 Doug Evans <dje@google.com>
4585 * NEWS: Mention "set debug dwarf-line".
4586 * dwarf2read.c (dwarf_line_debug): New static global.
4587 (add_include_dir): Add debug dwarf-line support.
4588 (add_file_name, dwarf_record_line, dwarf_finish_line): Ditto.
4589 (_initialize_dwarf2_read): New parameter "debug dwarf-line".
4591 2015-05-27 Doug Evans <dje@google.com>
4593 * cp-namespace.c (cp_lookup_nested_symbol): New arg "domain".
4594 All callers updated.
4595 (cp_lookup_nested_symbol_1, find_symbol_in_baseclass): Ditto.
4596 * cp-support.h (cp_lookup_nested_symbol): Update.
4598 2015-05-27 Doug Evans <dje@google.com>
4601 * block.c (block_find_symbol): New function.
4602 (block_find_non_opaque_type): Ditto.
4603 (block_find_non_opaque_type_preferred): Ditto.
4604 * block.h (block_symbol_matcher_ftype): New typedef.
4605 (block_find_symbol): Declare.
4606 (block_find_non_opaque_type): Ditto.
4607 (block_find_non_opaque_type_preferred): Ditto.
4608 * dwarf2read.c (dw2_lookup_symbol): Call block_find_symbol.
4609 * psymtab.c (psym_lookup_symbol): Ditto.
4610 * symtab.c (basic_lookup_transparent_type_1): New function.
4611 (basic_lookup_transparent_type): Call it.
4613 2015-05-27 Yao Qi <yao.qi@linaro.org>
4615 * aarch64-tdep.c (aarch64_record_data_proc_simd_fp): Return
4616 AARCH64_RECORD_UNKNOWN for unknown instruction encoding.
4618 2015-05-27 Yao Qi <yao.qi@linaro.org>
4620 * aarch64-tdep.c (aarch64_record_branch_except_sys): Split lines
4622 (aarch64_record_load_store): Likewise.
4624 2015-05-26 Doug Evans <dje@google.com>
4626 PR c++/18141, c++/18417.
4627 * cp-support.c (cp_lookup_rtti_type): Handle the case of NAME being
4630 2015-05-26 Doug Evans <dje@google.com>
4632 * NEWS: Add entries for command renamings.
4633 * dwarf2read.c (dwarf_read_debug): Renamed from dwarf2_read_debug.
4635 (dwarf_die_debug): Renamed from dwarf2_die_debug. All uses updated.
4636 (dwarf_max_cache_age): Renamed from dwarf2_max_cache_age.
4638 (show_dwarf_max_cache_age): Renamed from show_dwarf2_max_cache_age.
4639 All callers updated. Fix spelling of DWARF in help text.
4640 (set_dwarf_cmdlist): Renamed from set_dwarf2_cmdlist.
4642 (show_dwarf_cmdlist): Renamed from show_dwarf2_cmdlist.
4644 (set_dwarf_cmd): Renamed from set_dwarf2_cmd. All callers updated.
4645 (show_dwarf_cmd): Renamed from show_dwarf2_cmd. All callers updated.
4646 (dwarf_always_disassemble): Renamed from dwarf_always_disassemble.
4648 (show_dwarf_always_disassemble): Renamed from
4649 show_dwarf2_always_disassemble. All callers updated.
4650 (_initialize_dwarf2_read): Rename "set/show dwarf2" prefix to
4651 "set/show dwarf". Rename "set/show dwarf2 max-cache-age" to
4652 "set/show dwarf max-cache-age". Rename
4653 "set/show dwarf2 always-disassemble" to
4654 "set/show dwarf always-disassemble". Rename
4655 "set/show debug dwarf2-read" to "set/show debug dwarf-read". Rename
4656 "set/show debug dwarf2-die" to "set/show debug dwarf-die".
4658 2015-05-26 Doug Evans <dje@google.com>
4661 * python/py-lazy-string.c (stpy_convert_to_value): Use
4662 gdbpy_gdb_memory_error not PyExc_MemoryError.
4663 (gdbpy_create_lazy_string_object): Ditto.
4665 2015-05-26 Andrew Burgess <andrew.burgess@embecosm.com>
4667 * tui/tui-regs.c (tui_reg_next_command): Compare against NULL.
4669 2015-05-26 Andrew Burgess <andrew.burgess@embecosm.com>
4671 * tui/tui-regs.c (tui_reg_prev_command): New function.
4672 (_initialize_tui_regs): Add 'prev' command for 'tui reg'.
4673 * reggroups.c (reggroup_prev): New function.
4674 * reggroups.h (reggroup_prev): Add declaration. Update comment.
4676 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
4677 Yao Qi <yao.qi@linaro.org>
4679 * aarch64-linux-tdep.c: Include linux-record.h and
4681 (struct linux_record_tdep aarch64_linux_record_tdep): Declare.
4682 (aarch64_syscall): New enum.
4683 (aarch64_canonicalize_syscall): New function.
4684 (aarch64_all_but_pc_registers_record): New function.
4685 (aarch64_linux_syscall_record): New function.
4686 (aarch64_linux_init_abi): Install AArch64 process record
4687 handler. Update to handle syscall recording.
4688 * aarch64-tdep.c: Include record.h and record-full.h.
4689 (submask, bit, bits, REG_ALLOC, MEM_ALLOC): New macros.
4690 (struct aarch64_mem_r): Define.
4691 (aarch64_record_result): New enum.
4692 (struct insn_decode_record): Define.
4693 (insn_decode_record): New typedef.
4694 (aarch64_record_data_proc_reg): New function.
4695 (aarch64_record_data_proc_imm): New function.
4696 (aarch64_record_branch_except_sys): New function.
4697 (aarch64_record_load_store): New function.
4698 (aarch64_record_data_proc_simd_fp): New function.
4699 (aarch64_record_asimd_load_store): New function.
4700 (aarch64_record_decode_insn_handler): New function.
4701 (deallocate_reg_mem): New function.
4702 (aarch64_process_record): New function.
4703 * aarch64-tdep.h (struct gdbarch_tdep) <aarch64_syscall_record>:
4705 (aarch64_process_record): New extern declaration.
4706 * configure.tgt: Add linux-record.o to gdb_target_obs.
4707 * linux-record.h (struct linux_record_tdep) <arg7>: New field.
4709 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
4711 * NEWS: Add a note on process record-replay support on aarch64*-linux*
4714 2015-05-26 Martin Galvan <martin.galvan@tallertechnologies.com>
4716 * amd64-tdep.c: Replace in_function_epilogue_p with
4717 stack_frame_destroyed_p throughout.
4718 * arch-utils.c: Ditto.
4719 * arch-utils.h: Ditto.
4720 * arm-tdep.c: Ditto.
4721 * breakpoint.c: Ditto.
4722 * gdbarch.sh: Ditto.
4723 * hppa-tdep.c: Ditto.
4724 * i386-tdep.c: Ditto.
4725 * mips-tdep.c: Ditto.
4726 * nios2-tdep.c: Ditto.
4727 * rs6000-tdep.c: Ditto.
4728 * s390-linux-tdep.c: Ditto.
4729 * score-tdep.c: Ditto.
4731 * sparc-tdep.c: Ditto.
4732 * sparc-tdep.h: Ditto.
4733 * sparc64-tdep.c: Ditto.
4734 * spu-tdep.c: Ditto.
4735 * tic6x-tdep.c: Ditto.
4736 * tilegx-tdep.c: Ditto.
4737 * xstormy16-tdep.c: Ditto.
4738 * gdbarch.c, gdbarch.h: Re-generated.
4740 2015-05-22 Andrew Burgess <andrew.burgess@embecosm.com>
4742 * NEWS: Mention 'tui enable' and 'tui disable'.
4743 * tui/tui.c (tui_enable_command): New function.
4744 (tui_disable_command): New function.
4745 (_initialize_tui): New function.
4747 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
4749 * tui/tui-regs.c (tui_reg_next_command): Use NULL not 0.
4751 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
4753 * tui/tui-layout.c (tui_set_layout_for_display_command): Ensure
4756 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
4758 * tui/tui-layout.c (tui_layout_command): Move call to tui_enable
4760 (tui_set_layout_for_display_command): ...here, before calling
4761 tui_set_layout. Only set the layout if gdb has not already
4762 entered the TUI_FAILURE state.
4764 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
4766 * tui/tui-layout.c (layout_completer): New function.
4767 (_initialize_tui_layout): Set completer on layout command.
4769 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
4771 * tui/tui-layout.c (tui_set_layout): Remove
4772 tui_register_display_type parameter. Remove all checking of this
4773 parameter, and reindent function. Update header comment.
4774 (tui_set_layout_for_display_command): Rename to...
4775 (tui_set_layout_by_name): ...this, and don't check for different
4776 register class types, don't pass a tui_register_display_type to
4777 tui_set_layout. Update header comment.
4778 (layout_names): Remove register set specific names.
4779 * tui/tui-layout.h (tui_set_layout): Remove
4780 tui_register_display_type parameter.
4781 * tui/tui.c (tui_rl_change_windows): Don't pass a
4782 tui_register_display_type to tui_set_layout.
4783 (tui_rl_delete_other_windows): Likewise.
4784 (tui_enable): Likewise.
4785 * tui/tui-data.h (TUI_FLOAT_REGS_NAME): Remove.
4786 (TUI_FLOAT_REGS_NAME_LOWER): Remove.
4787 (TUI_GENERAL_REGS_NAME): Remove.
4788 (TUI_GENERAL_REGS_NAME_LOWER): Remove.
4789 (TUI_SPECIAL_REGS_NAME): Remove.
4790 (TUI_SPECIAL_REGS_NAME_LOWER): Remove.
4791 (TUI_GENERAL_SPECIAL_REGS_NAME): Remove.
4792 (TUI_GENERAL_SPECIAL_REGS_NAME_LOWER): Remove.
4793 (enum tui_register_display_type): Remove.
4794 (struct tui_layout_def): Remove regs_display_type and
4795 float_regs_display_type fields.
4796 (struct tui_data_info): Remove regs_display_type field.
4797 (tui_layout_command): Use new name for
4798 tui_set_layout_for_display_command.
4799 * tui/tui-data.c (layout_def): Don't initialise removed fields.
4800 (tui_clear_win_detail): Don't initialise removed fields of
4802 * tui/tui-regs.c (tui_show_registers): Use new name for
4803 tui_set_layout_for_display_command.
4804 * tui/tui.h (tui_set_layout_for_display_command): Rename
4806 (tui_set_layout_by_name): ...this.
4807 * printcmd.c (display_command): Remove tui related layout call,
4810 2015-05-20 Joel Brobecker <brobecker@adacore.com>
4812 * infrun.c (handle_inferior_event_1): Renames handle_inferior_event.
4813 (handle_inferior_event): New function.
4815 2015-05-20 Joel Brobecker <brobecker@adacore.com>
4817 * ada-lang.c (to_fixed_array_type): Rename local variable
4818 typename into type_name.
4820 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
4822 Fix ASAN crash for gdb.compile/compile.exp.
4823 * infcall.c (call_function_by_hand_dummy): Use xstrdup for NAME.
4825 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
4827 * compile/compile-c-symbols.c (convert_symbol_sym, gcc_convert_symbol)
4828 (gcc_symbol_address): Change gdb_stdout to gdb_stdlog.
4829 * compile/compile-object-load.c (setup_sections, compile_object_load):
4831 * compile/compile.c (compile_to_object): Likewise.
4833 2015-05-16 Doug Evans <xdje42@gmail.com>
4835 * NEWS: Mention support for unbuffered Guile memory ports.
4836 * scm-ports.c (ioscm_memory_port): Update comments on end, size.
4837 (ioscm_lseek_address): Improve overflow calculation.
4838 (gdbscm_memory_port_fill_input): Add assert.
4839 (gdbscm_memory_port_write): Handle unbuffered ports.
4840 Handle large writes identical to Guile's fport_write.
4841 (gdbscm_memory_port_seek): Fix seeking past end check.
4842 (gdbscm_memory_port_close): Handle closing unbuffered port.
4843 (ioscm_parse_mode_bits): Recognize "0" for unbuffered ports.
4844 (ioscm_init_memory_port): Handle unbuffered ports.
4845 (ioscm_reinit_memory_port): Ditto.
4846 (ioscm_init_memory_port): Update size calculation.
4847 (gdbscm_open_memory): Support zero sized ports.
4849 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4851 * compile/compile-object-load.c (get_out_value_type): Fix uninitialized
4852 variable compiler warnings.
4854 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4856 * compile/compile-object-load.c (get_out_value_type): Fix returned type.
4858 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4859 Phil Muldoon <pmuldoon@redhat.com>
4861 * NEWS (Changes since GDB 7.9): Add compile print.
4862 * compile/compile-c-support.c (add_code_header, add_code_footer)
4863 (c_compute_program): Add COMPILE_I_PRINT_ADDRESS_SCOPE and
4864 COMPILE_I_PRINT_VALUE_SCOPE.
4865 * compile/compile-internal.h (COMPILE_I_PRINT_OUT_ARG_TYPE)
4866 (COMPILE_I_PRINT_OUT_ARG, COMPILE_I_EXPR_VAL, COMPILE_I_EXPR_PTR_TYPE):
4868 * compile/compile-object-load.c: Include block.h.
4869 (get_out_value_type): New function.
4870 (compile_object_load): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
4871 COMPILE_I_PRINT_VALUE_SCOPE. Set compile_module's OUT_VALUE_ADDR and
4873 * compile/compile-object-load.h (struct compile_module): Add fields
4874 out_value_addr and out_value_type.
4875 * compile/compile-object-run.c: Include valprint.h and compile.h.
4876 (struct do_module_cleanup): Add fields out_value_addr and
4878 (do_module_cleanup): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
4879 COMPILE_I_PRINT_VALUE_SCOPE.
4880 (compile_object_run): Propagate out_value_addr and out_value_type.
4881 Pass OUT_VALUE_ADDR.
4882 * compile/compile.c: Include valprint.h.
4883 (compile_print_value, compile_print_command): New functions.
4884 (eval_compile_command): Handle failed COMPILE_I_PRINT_ADDRESS_SCOPE.
4885 (_initialize_compile): Update compile code help text. Install
4886 compile_print_command.
4887 * compile/compile.h (compile_print_value): New prototype.
4888 * defs.h (enum compile_i_scope_types): Add
4889 COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE.
4891 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4893 * compile/compile-object-load.c (get_regs_type): Add parameter func_sym.
4894 Rely on its parameter count.
4895 (compile_object_load): Replace lookup_minimal_symbol_text by
4896 lookup_global_symbol_from_objfile. Verify FUNC_SYM. Set it in the
4898 * compile/compile-object-load.h (struct compile_module): Replace
4899 func_addr by func_sym.
4900 * compile/compile-object-run.c: Include block.h.
4901 (compile_object_run): Reset module variable after it is freed. Use
4902 FUNC_SYM instead of FUNC_ADDR. Rely on it.
4904 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4906 * compile/compile-c-support.c (print_one_macro): Use #ifndef.
4907 (generate_register_struct): Use __gdb_uintptr for TYPE_CODE_PTR.
4908 (c_compute_program): Call generate_register_struct after typedefs.
4909 * compile/compile-loc2c.c (push, pushf_register_address)
4910 (pushf_register): Cast to GCC_UINTPTR.
4911 (do_compile_dwarf_expr_to_c): Use unused attribute. Add space after
4912 type. Use GCC_UINTPTR instead of void *. Remove excessive cast.
4913 (compile_dwarf_expr_to_c): Use GCC_UINTPTR instead of void *.
4914 * compile/compile.c (_initialize_compile): Enable warnings for
4917 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4919 * cli/cli-script.c (execute_control_command): Update
4920 eval_compile_command caller.
4921 * compile/compile-object-load.c (compile_object_load): Add parameters
4922 scope and scope_data. Set them.
4923 * compile/compile-object-load.h (struct compile_module): Add fields
4924 scope and scope_data.
4925 (compile_object_load): Add parameters scope and scope_data.
4926 * compile/compile-object-run.c (struct do_module_cleanup): Add fields
4927 scope and scope_data.
4928 (compile_object_run): Propagate the fields scope and scope_data.
4929 * compile/compile.c (compile_file_command, compile_code_command):
4930 Update eval_compile_command callers.
4931 (eval_compile_command): Add parameter scope_data. Pass it plus scope.
4932 * compile/compile.h (eval_compile_command): Add parameter scope_data.
4933 * defs.h (struct command_line): Add field scope_data.
4935 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4937 * printcmd.c (struct format_data): Move it to valprint.h.
4938 (print_command_parse_format, print_value): New functions from ...
4939 (print_command_1): ... here. Call them.
4940 * valprint.h (struct format_data): Move it here from printcmd.c.
4941 (print_command_parse_format, print_value): New declarations.
4943 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4945 * compile/compile-object-load.c (compile_object_load): Add
4946 COMPILE_DEBUG message.
4948 2015-05-15 Jerome Guitton <guitton@adacore.com>
4950 * ada-lang.c (ada_value_ptr_subscript): Use enum position of
4951 index to get element instead of enum value.
4952 (ada_value_slice_from_ptr, ada_value_slice): Use enum position
4953 of index to compute length, but enum values to compute bounds.
4954 (ada_array_length): Use enum position of index instead of enum value.
4955 (pos_atr): Move position computation to...
4956 (ada_evaluate_subexp): Use enum values to compute bounds.
4957 * gdbtypes.c (discrete_position): ...this new function.
4958 * gdbtypes.h (discrete_position): New function declaration.
4959 * valprint.c (val_print_array_elements): Call discrete_position
4960 to handle array indexed by non-contiguous enumeration types.
4962 2015-05-15 Jerome Guitton <guitton@adacore.com>
4964 * ada-lang.c (find_parallel_type_by_descriptive_type):
4965 Go through typedefs during lookup.
4966 (to_fixed_array_type): Add support for non-bit packed arrays
4967 as variable-length fields.
4969 2015-05-15 Pedro Alves <palves@redhat.com>
4970 Simon Marchi <simon.marchi@ericsson.com>
4972 * event-loop.c (gdb_notifier) <next_file_handler,
4973 next_poll_fds_index>: New fields.
4974 (get_next_file_handler_to_handle_and_advance): New function.
4975 (delete_file_handler): If deleting the next file handler to
4976 handle, advance to the next file handler.
4977 (gdb_wait_for_event): Bail early if no event fired. Poll file
4978 handlers in round-robin fashion.
4980 2015-05-15 Pedro Alves <palves@redhat.com>
4982 * linux-tdep.c (linux_find_memory_regions_full): Rename local
4983 'private' to 'priv'.
4985 2015-05-15 Pedro Alves <palves@redhat.com>
4987 * nat/linux-nat.h: Include "target/waitstatus.h".
4989 2015-05-15 Yuanhui Zhang <asmwarrior@gmail.com>
4991 * python/py-unwind.c (struct reg_info): Move out of ...
4992 (struct cached_frame_info): ... this scope.
4993 (pending_frame_object_type, unwind_info_object_type): Make extern.
4995 2015-05-15 Joel Brobecker <brobecker@adacore.com>
4997 * ada-lang.c (ada_value_primitive_packed_val): Make sure
4998 accumSize is never negative.
5000 2015-05-14 Patrick Palka <patrick@parcs.ath.cx>
5002 * tui/tui-command.c: Remove include of <ctype.h>.
5003 (tui_dispatch_ctrl_char): Remove workaround for xterm terminals.
5005 2015-05-13 Martin Galvan <martin.galvan@tallertechnologies.com>
5007 * dwarf2read.c (die_needs_namespace): Return 1 for
5008 DW_TAG_inlined_subroutine.
5010 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
5012 * regcache.c (regcache_cpy_no_passthrough): New declaration.
5013 (regcache_cpy_no_passthrough): Make it static, add function comment.
5014 * regcache.h (regcache_dup, regcache_cpy): Reduce/update their comment.
5015 (regcache_cpy_no_passthrough): Remove declaration.
5017 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
5019 * gdbthread.h (struct thread_control_state): Update comment for
5021 * infcall.c (run_inferior_call): Update comment about
5023 * infcmd.c (get_return_value): Update comment about stop_registers.
5024 (finish_forward): Update comment about proceed_to_finish.
5025 * infrun.c (stop_registers): Remove.
5026 (clear_proceed_status, normal_stop): Remove stop_registers handling.
5027 * infrun.h (stop_registers): Remove.
5029 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
5031 * infcall.c (struct dummy_frame_context_saver)
5032 (dummy_frame_context_saver_data_free, dummy_frame_context_saver_dtor)
5033 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
5034 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
5036 (call_function_by_hand_dummy): Move discard_cleanups of
5037 inf_status_cleanup before dummy_frame_push. Call
5038 dummy_frame_context_saver_setup and prepare context_saver_cleanup.
5039 Use dummy_frame_context_saver_get_regs instead of stop_registers.
5040 * infcall.h (struct dummy_frame_context_saver)
5041 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
5042 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
5044 * infcmd.c: Include infcall.h.
5045 (get_return_value): Add parameter ctx_saver, use it instead of
5047 (print_return_value): Add parameter ctx_saver, pass it.
5048 (struct finish_command_continuation_args): Add field ctx_saver.
5049 (finish_command_continuation): Update print_return_value caller.
5050 (finish_command_continuation_free_arg): Free also ctx_saver.
5051 (finish_forward): Call dummy_frame_context_saver_setup.
5052 * inferior.h (struct dummy_frame_context_saver): New declaration.
5053 (get_return_value): Add parameter ctx_saver.
5054 * python/py-finishbreakpoint.c (bpfinishpy_pre_stop_hook): Update
5055 get_return_value caller.
5057 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
5059 * dummy-frame.c (struct dummy_frame_dtor_list): New.
5060 (struct dummy_frame): Replace dtor and dtor_data by dtor_list.
5061 (remove_dummy_frame): Process dtor_list.
5062 (pop_dummy_frame): Process dtor_list.
5063 (register_dummy_frame_dtor): Maintain dtor_list.
5064 (find_dummy_frame_dtor): Handle dtor_list.
5065 * dummy-frame.h (register_dummy_frame_dtor, find_dummy_frame_dtor):
5068 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
5070 * compile/compile-object-run.c (do_module_cleanup): Add parameter
5072 (compile_object_run): Update do_module_cleanup caller.
5073 * dummy-frame.c: Include infcall.h.
5074 (struct dummy_frame): Update dtor comment.
5075 (remove_dummy_frame): Call dtor.
5076 (pop_dummy_frame): Update dtor caller.
5077 * dummy-frame.h (dummy_frame_dtor_ftype): Add parameter
5080 2015-05-13 Joel Brobecker <brobecker@adacore.com>
5084 2015-05-13 Joel Brobecker <brobecker@adacore.com>
5086 * NEWS: Create "Changes in GDB 7.9.1" section. Move news about
5087 Xmethods now being able to specify a result type to that new
5090 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
5092 * tui/tui-win.c (tui_async_resize_screen): Clear win_resized
5093 first before resizing the window.
5094 * tui/tui.c (tui_enable): Likewise.
5096 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
5098 * dummy-frame.c (struct dummy_frame): Use proper typedef for dtor.
5099 * dummy-frame.h (dummy_frame_dtor_ftype): Add its comment.
5100 * infcall.c (call_function_by_hand_dummy): Use proper typedef for
5101 dummy_dtor parameter.
5102 * infcall.h: Include dummy-frame.h.
5103 (call_function_by_hand_dummy_dtor_ftype): Remove.
5104 (call_function_by_hand_dummy): Use proper typedef for dummy_dtor
5107 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
5110 * top.c (history_size_setshow_var): Change type to signed.
5111 Initialize to -2. Update documentation.
5112 (set_readline_history_size): Define.
5113 (set_history_size_command): Use it. Remove logic for handling
5115 (init_history): Use set_readline_history_size(). Test for a
5116 value of -2 instead of 0 when determining whether to set a
5117 default history size.
5118 (init_main): Decode the argument of the "size" command as a
5119 zuinteger_unlimited.
5121 2015-05-12 Doug Evans <dje@google.com>
5123 * dwarf2read.c (struct file_entry): Tweak comments.
5124 (get_debug_line_section): Tweak comments.
5126 2015-05-12 Don Breazeal <donb@codesourcery.com>
5128 * NEWS: Announce fork support in the RSP and support
5129 for fork debugging in extended mode.
5131 2015-05-12 Don Breazeal <donb@codesourcery.com>
5133 * remote.c (remote_insert_fork_catchpoint): New function.
5134 (remote_remove_fork_catchpoint): New function.
5135 (remote_insert_vfork_catchpoint): New function.
5136 (remote_remove_vfork_catchpoint): New function.
5137 (pending_fork_parent_callback): New function.
5138 (remove_new_fork_child): New function.
5139 (remote_update_thread_list): Call remote_notif_get_pending_events
5140 and remove_new_fork_child.
5141 (extended_remote_kill): Kill fork child when killing the
5142 parent before follow_fork completes.
5143 (init_extended_remote_ops): Initialize target vector with
5144 new fork catchpoint functions.
5146 2015-05-12 Don Breazeal <donb@codesourcery.com>
5148 * remote.c (remove_vfork_event_p): New function.
5149 (remote_follow_fork): Add vfork event type to event checking.
5150 (remote_parse_stop_reply): New stop reasons "vfork" and
5151 "vforkdone" for RSP 'T' Stop Reply Packet.
5153 2015-05-12 Don Breazeal <donb@codesourcery.com>
5155 * linux-nat.c (linux_nat_ptrace_options): New function.
5156 (linux_init_ptrace, wait_lwp, linux_nat_filter_event):
5157 Call linux_nat_ptrace_options and use different argument to
5158 linux_enable_event_reporting.
5159 (_initialize_linux_nat): Delete call to
5160 linux_ptrace_set_additional_flags.
5161 * nat/linux-ptrace.c (current_ptrace_options): Rename to
5162 supported_ptrace_options.
5163 (additional_flags): Delete variable.
5164 (linux_check_ptrace_features): Use supported_ptrace_options.
5165 (linux_test_for_tracesysgood, linux_test_for_tracefork):
5166 Likewise, and remove additional_flags check.
5167 (linux_enable_event_reporting): Change 'attached' argument to
5168 'options'. Use supported_ptrace_options.
5169 (ptrace_supports_feature): Change comment. Use
5170 supported_ptrace_options.
5171 (linux_ptrace_set_additional_flags): Delete function.
5172 * nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
5173 Delete function prototype.
5174 * remote.c (remote_fork_event_p): New function.
5175 (remote_detach_pid): New function.
5176 (remote_detach_1): Call remote_detach_pid, don't mourn inferior
5177 if doing detach-on-fork.
5178 (remote_follow_fork): New function.
5179 (remote_parse_stop_reply): Handle new "T" stop reason "fork".
5180 (remote_pid_to_str): Print "process" strings for pid/0/0 ptids.
5181 (init_extended_remote_ops): Initialize to_follow_fork.
5183 2015-05-12 Don Breazeal <donb@codesourcery.com>
5185 * nat/linux-ptrace.c (linux_check_ptrace_features): Change
5186 from static to extern.
5187 * nat/linux-ptrace.h (linux_check_ptrace_features): Declare.
5188 * remote.c (anonymous enum): <PACKET_fork_event_feature,
5189 * PACKET_vfork_event_feature>: New enumeration constants.
5190 (remote_protocol_features): Add table entries for new packets.
5191 (remote_query_supported): Add new feature queries to qSupported
5194 2015-05-12 Gary Benson <gbenson@redhat.com>
5196 * remote.c (remote_add_inferior): Call exec_file_locate_attach
5197 for fake PIDs as well as real ones.
5198 (remote_pid_to_exec_file): Send empty annex if PID is fake.
5200 2015-05-09 Siva Chandra Reddy <sivachandra@google.com>
5202 * NEWS (Python Scripting): Mention the new gdb.Value methods.
5203 * python/py-value.c (valpy_reference_value): New function.
5204 (valpy_const_value): Likewise.
5205 (value_object_methods): Add new methods.
5206 * value.c (make_cv_value): New function.
5207 * value.h (make_cv_value): Declare.
5209 2015-05-08 Yao Qi <yao@codesourcery.com>
5210 Sandra Loosemore <sandra@codesourcery.com>
5212 * dwarf2read.c (setup_type_unit_groups): Do NULL pointer check
5213 to 'lh->include_dirs' before accessing to it.
5214 (psymtab_include_file_name): Likewise.
5215 (dwarf_decode_lines_1): Likewise.
5216 (dwarf_decode_lines): Likewise.
5217 (file_file_name): Likewise.
5219 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
5221 * nios2-linux-tdep.c (NIOS2_SIGRETURN_TRAMP_ADDR): Define.
5222 (NIOS2_SIGRETURN_REGSAVE_OFFSET): Define.
5223 (nios2_linux_rt_sigreturn_init): Adjust base address of
5226 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
5228 * nios2-tdep.c (nios2_breakpoint_from_pc): Revert to using
5229 "trap 31" as the breakpoint instruction on all targets.
5231 2015-05-08 Jan Kratochvil <jan.kratochvil@redhat.com>
5233 * infcmd.c (print_return_value): Remove unused declaration.
5235 2015-05-08 Joel Brobecker <brobecker@adacore.com>
5237 * dwarf2read.c (attr_to_dynamic_prop)
5238 <DW_AT_data_member_location>: Use read_type_die isntead of
5241 2015-05-08 Joel Brobecker <brobecker@adacore.com>
5243 * ada-lang.c (ada_convert_actual): Add handling of formals
5244 passed inside an aligner type.
5246 2015-05-08 Joel Brobecker <brobecker@adacore.com>
5248 * copyright.py (NOT_FSF_LIST): Remove sim/erc32 entries.
5250 2015-05-08 Siva Chandra Reddy <sivachandra@google.com>
5253 * python/lib/gdb/command/xmethods.py (print_xm_info): Fix typo.
5254 Print xmethod matcher status.
5256 2015-05-08 Andreas Arnez <arnez@linux.vnet.ibm.com>
5258 * s390-linux-nat.c (fill_gregset): Avoid relying on the PSWA
5259 register in the regcache when treating the PSWM register, and vice
5262 2015-05-07 Gary Benson <gbenson@redhat.com>
5264 * linux-thread-db.c (struct thread_db_info)
5265 <td_ta_map_id2thr_p>: Remove field.
5266 (try_thread_db_load_1): Remove initialization for the above.
5268 2015-05-07 Gary Benson <gbenson@redhat.com>
5270 * linux-thread-db.c (struct thread_db_info)
5271 <td_thr_validate_p>: Remove field.
5272 (try_thread_db_load_1): Remove initialization for the above.
5274 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
5276 * compile/compile-object-load.c (compile_object_load): Support
5279 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
5281 * compile/compile.c (compile_to_object): Make the cmd_string parameter
5282 const. Use new variables for the const compatibility.
5283 (eval_compile_command): Make the cmd_string parameter const.
5284 * compile/compile.h (eval_compile_command): Make the cmd_string
5287 2015-05-06 Joel Brobecker <brobecker@adacore.com>
5289 * defs.h (deprecated_init_ui_hook): Delete. Remove associated
5291 * top.c (deprecated_init_ui_hook): Delete.
5292 (gdb_init): Remove handling of deprecated_init_ui_hook.
5293 * interps.c (clear_interpreter_hooks): Remove handling of
5294 deprecated_init_ui_hook.
5295 * main.c (captured_main): Update comment.
5297 2015-05-06 Joel Brobecker <brobecker@adacore.com>
5299 * solib.c (_initialize_solib): Add "info dll" alias creation.
5300 * windows-nat.c (set_windows_aliases): Delete.
5301 (_initialize_windows_nat): Remove deprecated_init_ui_hook
5303 * NEWS: Add news entry about "info dll" now being available
5306 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5308 * ada-lang.c (value_assign_to_component): Reformat and improve
5309 documentation. Remove all trailing spaces.
5311 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5313 * inline-frame.c (inline_frame_sniffer, skip_inline_frames):
5314 Stop counting inlined frames as soon as an out-of-line function
5317 2014-05-05 Pierre-Marie de Rodat <derodat@adacore.com>
5319 * dwarf2read.c (inherit_abstract_dies): Skip
5320 DW_TAG_GNU_call_site dies while inheriting children of an
5321 abstract DIE into a scope.
5322 (read_lexical_block_scope): Inherit abstract DIE's for
5325 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5327 * ada-valprint.c (val_print_packed_array_elements): Delete
5328 variable "len". Add a type-length check when comparing two
5329 consecutive elements of the array. Use the element's actual
5330 length in call to value_contents_eq.
5331 * ada-lang.c (ada_value_primitive_packed_val): Always return
5332 a value whose type has been resolved.
5334 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5336 * ada-lang.c (ada_value_primitive_packed_val): Recompute
5337 BIT_SIZE and LEN if the size of the resolved type is smaller
5338 than BIT_SIZE * HOST_CHAR_BIT.
5340 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5342 * ada-lang.c (ada_value_primitive_packed_val): Use a more
5343 correct address in call to value_at. Adjust call to
5344 value_address accordingly.
5346 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5348 * ada-valprint.c (ada_val_print_1): Resolve TYPE before trying
5351 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5353 * dwarf2loc.h (struct property_addr_info): Add "valaddr" field.
5354 * dwarf2loc.c (dwarf2_evaluate_property): Add handling of
5356 * gdbtypes.h (resolve_dynamic_type): Add "valaddr" parameter.
5357 * gdbtypes.c (resolve_dynamic_struct): Set pinfo.valaddr.
5358 (resolve_dynamic_type_internal): Set pinfo.valaddr.
5359 Add handling of addr_stack->valaddr.
5360 (resolve_dynamic_type): Add "valaddr" parameter.
5361 Set pinfo.valaddr field.
5362 * ada-lang.c (ada_discrete_type_high_bound): Update call to
5363 resolve_dynamic_type.
5364 (ada_discrete_type_low_bound): Likewise.
5365 * findvar.c (default_read_var_value): Likewise.
5366 * value.c (value_from_contents_and_address): Likewise.
5368 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5370 * gdbtypes.c (resolve_dynamic_array): Use
5371 create_array_type_with_stride instead of create_array_type.
5373 2015-04-30 DJ Delorie <dj@redhat.com>
5375 * rl78-tdep.c (rl78_analyze_prologue): Pass RL78_ISA_DEFAULT to
5378 2015-04-29 Doug Evans <dje@google.com>
5381 * NEWS: Document new gdb.XMethodWorker.get_result_type method.
5382 * eval.c (evaluate_subexp_standard) <OP_FUNCALL>: Handle
5383 EVAL_AVOID_SIDE_EFFECTS for xmethods.
5384 * extension-priv.h (struct extension_language_ops)
5385 <get_xmethod_result_type>: New member.
5386 * extension.c (get_xmethod_result_type): New function.
5387 * extension.h (get_xmethod_result_type): Declare.
5388 * python/py-xmethods.c (get_result_type_method_name): New static
5390 (py_get_result_type_method_name): Ditto.
5391 (gdbpy_get_xmethod_result_type): New function.
5392 (gdbpy_initialize_xmethods): Initialize py_get_result_type_method_name.
5393 * python/python-internal.h (gdbpy_get_xmethod_result_type): Declare.
5394 * python/python.c (python_extension_ops): Add
5395 gdbpy_get_xmethod_result_type.
5396 * python/lib/gdb/xmethod.py (XMethodWorker): Add get_result_type.
5397 * valarith.c (value_x_binop): Handle EVAL_AVOID_SIDE_EFFECTS for
5399 (value_x_unop): Ditto.
5400 * value.c (result_type_of_xmethod): New function.
5401 * value.h (result_type_of_xmethod): Declare.
5403 2015-04-29 Gary Benson <gbenson@redhat.com>
5405 * solib.c (solib_find_1): Allow fd argument to be NULL.
5406 (exec_file_find): Update comment.
5407 (solib_find): Likewise.
5408 * exec.c (exec_file_locate_attach): Use NULL as fd
5409 argument to exec_file_find to avoid having to close
5411 * infrun.c (follow_exec): Likewise.
5413 2015-04-28 Doug Evans <dje@google.com>
5416 * python/lib/gdb/printing.py (register_pretty_printer): Handle
5417 name or __name__ attributes. Handle gdb module as first argument.
5419 2015-04-28 Doug Evans <dje@google.com>
5422 * python/py-prettyprint.c (print_children): Verify result of children
5423 iterator. Provide better error message.
5424 * python/python-internal..h (gdbpy_print_python_errors_p): Declare.
5425 * python/python.c (gdbpy_print_python_errors_p): New function.
5427 2015-04-28 Doug Evans <dje@google.com>
5429 * gdbtypes.h (struct cplus_struct_type) <n_baseclasses>: Fix comment.
5431 2015-04-28 Sasha Smundak <asmundak@google.com>
5433 * NEWS: Mention gdb.Type.optimized_out method.
5434 * python/py-type.c (typy_optimized_out): New function.
5436 2015-04-28 John Baldwin <jhb@FreeBSD.org>
5438 * fbsd-nat.c: Include "gdb_wait.h" instead of <sys/wait.h>.
5440 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
5442 * utils.c (init_page_info): Set rl_catch_sigwinch to zero.
5443 (initialize_utils): Move call of init_page_info() to ...
5444 * top.c (gdb_init): ... here.
5446 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
5448 * tui/tui-win.c (tui_sigwinch_handler): Remove now-stale comment.
5449 (tui_sigwinch_handler): Still update our idea of
5450 the terminal's width and height even when TUI is not active.
5452 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
5454 * utils.h (set_screen_width_and_height): Declare.
5455 * utils.c (set_screen_width_and_height): Define.
5456 * tui/tui-win.c (tui_update_gdb_sizes): Use it.
5458 2015-04-28 Gary Benson <gbenson@redhat.com>
5460 * infrun.c (solist.h): New include.
5461 (follow_exec): Use exec_file_find to prefix execd_pathname
5464 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
5466 * tui/tui-source.c (tui_set_source_content): Avoid calling
5467 strcpy() when offset is 0.
5469 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
5472 * tui/tui-data.c (tui_free_window): Don't free the locator
5473 window when passed an SRC_WIN or a DISASSEM_WIN.
5475 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
5477 * tui/tui-data.h (struct tui_win_element): Forward-declare.
5478 (tui_win_content): Move declaration.
5479 (struct tui_gen_win_info): Give 'content' field the
5480 type tui_win_content.
5481 * tui/tui-data.c (init_content_element): Remove redundant and
5483 (tui_add_content_elements): Remove erroneous cast.
5484 * tui/tui-disasm.c (tui_set_disassem_content): Remove redundant
5486 (tui_get_begin_asm_address): Likewise.
5487 * tui/tui-regs.c (tui_show_registers): Likewise.
5488 (tui_show_register_group): Likewise.
5489 (tui_display_registers_from): Likewise.
5490 (tui_check_register_values): Likewise.
5491 * tui/tui-source.c (tui_set_source_content): Likewise.
5492 (tui_set_source_content_nil): Likewise.
5493 (tui_source_is_displayed): Likewise.
5494 * tui/tui-stack.c (tui_show_locator_content): Likewise.
5495 (tui_set_locator_fullname): Likewise.
5496 (tui_set_locator_info): Likewise.
5497 (tui_show_frame_info): Likewise.
5498 * tui/tui-winsource.c (tui_clear_source_content): Likewise.
5499 (tui_show_source_line): Likewise.
5500 (tui_horizontal_source_scroll): Likewise.
5501 (tui_update_breakpoint_info): Likewise.
5502 (tui_set_exec_info_content): Likewise.
5503 (tui_show_exec_info_content): Likewise.
5504 (tui_alloc_source_buffer): Likewise.
5505 (tui_line_is_displayed): Likewise.
5506 (tui_addr_is_displayed): Likewise.
5508 2015-04-27 John Baldwin <jhb@FreeBSD.org>
5510 * fbsd-nat.c: (fbsd_wait) [PL_FLAG_EXEC]: Report TARGET_WAITKIND_EXECD
5511 event if PL_FLAG_EXEC is set.
5512 [PL_FLAG_EXEC] (fbsd_insert_exec_catchpoint): New function.
5513 [PL_FLAG_EXEC] (fbsd_remove_exec_catchpoint): New function.
5514 (fbsd_nat_add_target) [PL_FLAG_EXEC]: Set
5515 "to_insert_exec_catchpoint" to "fbsd_insert_exec_catchpoint".
5516 Set "to_remove_exec_catchpoint" to "fbsd_remove_exec_catchpoint".
5518 2015-04-27 John Baldwin <jhb@FreeBSD.org>
5520 * fbsd-nat.c: [PT_LWPINFO] New variable super_wait.
5521 [TDP_RFPPWAIT] New variable fbsd_pending_children.
5522 [TDP_RFPPWAIT] (fbsd_remember_child): New function.
5523 [TDP_RFPPWAIT] (fbsd_is_child_pending): New function.
5524 [TDP_RFPPWAIT] (fbsd_fetch_kinfo_proc): New function.
5525 [PT_LWPINFO] (fbsd_wait): New function.
5526 [TDP_RFPPWAIT] (fbsd_follow_fork): New function.
5527 [TDP_RFPPWAIT] (fbsd_insert_fork_catchpoint): New function.
5528 [TDP_RFPPWAIT] (fbsd_remove_fork_catchpoint): New function.
5529 [TDP_RFPPWAIT] (fbsd_insert_vfork_catchpoint): New function.
5530 [TDP_RFPPWAIT] (fbsd_remove_vfork_catchpoint): New function.
5531 [TDP_RFPPWAIT] (fbsd_enable_follow_fork): New function.
5532 [TDP_RFPPWAIT] (fbsd_post_startup_inferior): New function.
5533 [TDP_RFPPWAIT] (fbsd_post_attach): New function.
5534 (fbsd_nat_add_target) [PT_LWPINFO] Set "to_wait" to
5536 [TDP_RFPPWAIT] Set "to_follow_fork" to "fbsd_follow_fork".
5537 Set "to_insert_fork_catchpoint" to "fbsd_insert_fork_catchpoint".
5538 Set "to_remove_fork_catchpoint" to "fbsd_remove_fork_catchpoint".
5539 Set "to_insert_vfork_catchpoint" to "fbsd_insert_vfork_catchpoint".
5540 Set "to_remove_vfork_catchpoint" to "fbsd_remove_vfork_catchpoint".
5541 Set "to_post_startup_inferior" to "fbsd_post_startup_inferior".
5542 Set "to_post_attach" to "fbsd_post_attach".
5544 2015-04-27 John Baldwin <jhb@FreeBSD.org>
5546 * fbsd-nat.c (fbsd_pid_to_exec_file): Mark static.
5547 (fbsd_find_memory_regions): Mark static.
5548 (fbsd_nat_add_target): New function.
5549 * fbsd-nat.h: Export fbsd_nat_add_target and remove prototypes for
5550 fbsd_pid_to_exec_file and fbsd_find_memory_regions.
5551 * amd64fbsd-nat.c (_initialize_amd64fbsd_nat): Use fbsd_nat_add_target.
5552 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Likewise.
5553 * ppcfbsd-nat.c (_initialize_ppcfbsd_nat): Likewise.
5554 * sparc64fbsd-nat.c (_initialize_sparc64fbsd_nat): Likewise.
5556 2015-04-27 Gary Benson <gbenson@redhat.com>
5558 * objfiles.c (allocate_objfile): Do not attempt to expand name
5559 if name is a "target:" filename.
5560 * auto-load.c (load_auto_scripts_for_objfile): Do not attempt
5561 to load auto-load scripts for objfiles with "target:" filenames.
5563 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
5565 * s390-linux-tdep.c: Include "elf/s390.h" and "elf-bfd.h".
5566 (enum s390_vector_abi_kind): New enum.
5567 (struct gdbarch_tdep)<vector_abi>: New field.
5568 (s390_effective_inner_type): Add parameter min_size. Stop
5569 unwrapping if the inner type is smaller than min_size.
5570 (s390_function_arg_float): Adjust call to
5571 s390_effective_inner_type.
5572 (s390_function_arg_vector): New function.
5573 (s390_function_arg_integer): Adjust comment.
5574 (struct s390_arg_state)<vr>: New field.
5575 (s390_handle_arg): Add parameter 'is_unnamed'. Pass vector
5576 arguments according to vector ABI when appropriate.
5577 (s390_push_dummy_call): Initialize the argument state's field
5578 'vr'. Adjust calls to s390_handle_arg.
5579 (s390_register_return_value): Handle vector return values.
5580 (s390_return_value): Apply the "register" return value convention
5581 to a vector when appropriate.
5582 (s390_gdbarch_init): Initialize tdep->vector_abi.
5583 * NEWS: Announce S390 vector ABI support.
5585 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
5587 * s390-linux-tdep.c (s390_return_value_convention): Remove
5588 function. Inline its logic...
5589 (s390_return_value): ...here. Instead, move the handling of the
5590 "register" return value convention...
5591 (s390_register_return_value): ...here. New function.
5593 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
5596 (is_float_singleton): Remove function. Move the "singleton" part
5598 (s390_effective_inner_type): ...here. New function.
5599 (is_float_like): Remove function. Inline its logic...
5600 (s390_function_arg_float): ...here.
5601 (is_pointer_like, is_integer_like, is_struct_like): Remove
5602 functions. Inline their logic...
5603 (s390_function_arg_integer): ...here.
5604 (s390_function_arg_pass_by_reference): Remove function.
5605 (extend_simple_arg): Remove function.
5606 (alignment_of): Remove function.
5607 (struct s390_arg_state): New structure.
5608 (s390_handle_arg): New function.
5609 (s390_push_dummy_call): Move parameter placement logic to the new
5610 function s390_handle_arg. Call it for calculating the stack area
5611 sizes first, and again for actually writing the parameters.
5613 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
5615 * s390-linux-tdep.c (is_power_of_two): Add comment. Return
5616 false if the argument is zero.
5618 2015-04-27 Pierre-Marie de Rodat <derodat@adacore.com>
5620 * ada-lang.c (template_to_static_fixed_type): Return input type
5621 when it is already fixed. Cache the input type itself when not
5622 creating a static fixed copy. Make it explicit that we never
5623 molestate the input type.
5624 * gdbtypes.c (resolve_dynamic_struct): Reset the
5625 TYPE_TARGET_TYPE field for resolved copies.
5627 2015-04-27 Joel Brobecker <brobecker@adacore.com>
5629 * ada-lang.c (ada_is_tagged_type): Add call to ada_check_typedef.
5630 (ada_lookup_struct_elt_type): Remove calls to ada_check_typedef.
5631 (template_to_static_fixed_type): Call ada_check_typedef only
5634 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
5636 * cli/cli-dump.c (srec_dump_command): Add internationalization
5638 (ihex_dump_command): Likewise.
5639 (tekhex_dump_command): Likewise.
5640 (binary_dump_command): Likewise.
5641 (binary_append_command): Likewise.
5643 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
5645 * cli/cli-dump.c (verilog_cmdlist): New variable.
5646 (dump_verilog_memory): New function.
5647 (dump_verilog_value): New function.
5648 (verilog_dump_command): New function.
5649 (_initialize_cli_dump): Add new commands to support verilog dump
5651 * NEWS: Add entry for "dump verilog".
5653 2015-04-24 Pierre-Marie de Rodat <derodat@adacore.com>
5655 * gdbtypes.c (print_gnat_stuff): Do not recurse on the
5656 descriptive type when there is none.
5658 2015-04-23 Patrick Palka <patrick@parcs.ath.cx>
5660 * tui/tui-win.c (tui_async_resize_screen): Call
5661 rl_resize_terminal().
5663 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
5665 * windows-nat.c (handle_output_debug_string): Don't change
5666 current_event.dwThreadId.
5667 (get_windows_debug_event): Use thread_id, rather than relying on
5668 current_event.dwThreadId being changed.
5670 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
5672 * windows-nat.c (windows_continue): Report an error if
5673 ContinueDebugEvent() fails.
5675 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
5677 * windows-nat.c (windows_resume): Fix misspelling in debug output.
5679 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
5681 * windows-nat.c (get_windows_debug_event): Replace retval with
5682 thread_id throughout. Update stale comment.
5684 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
5686 * windows-nat.c (get_windows_debug_event): Don't use ternary
5687 conditional operator.
5689 2015-04-21 Pierre Muller <muller@sourceware.org>
5692 p-exp.y (yylex): Reorganize code to return the matched pattern
5693 for a field of this.
5695 2015-04-21 Gary Benson <gbenson@redhat.com>
5697 * common/fileio.h (fileio_to_host_openflags): New declaration.
5698 * common/fileio.c (fcntl.h): New include.
5699 (fileio_to_host_openflags): New function, factored out from...
5700 * inf-child.c (inf_child_fileio_open_flags_to_host): ...here.
5703 2015-04-21 Kevin Buettner <kevinb@redhat.com>
5705 * rl78-tdep.c (RL78_SP_ADDR): Define.
5706 (opc_reg_to_gdb_regnum): New static function.
5707 (rl78_analyze_prologue): Recognize instructions forming slightly
5708 more interesting prologues.
5710 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
5713 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
5714 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
5715 TYPE_CODE_REF types so that they are not considered as dynamic
5716 depending on the referenced type.
5717 (resolve_dynamic_type_internal): Likewise.
5719 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
5722 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
5723 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
5724 "top_level" parameter.
5725 (resolve_dynamic_type_internal): Remove the unused "top_level"
5726 parameter. Update call to is_dynamic_type_internal.
5727 (is_dynamic_type): Update call to is_dynamic_type_internal.
5728 (resolve_dynamic_range): Update call to
5729 resolve_dynamic_type_internal.
5730 (resolve_dynamic_union): Likewise.
5731 (resolve_dynamic_struct): Likewise.
5732 (resolve_dynamic_type): Likewise.
5734 2015-04-19 Gabriel Krisman Bertazi <gabriel@krisman.be>
5736 * breakpoint.c (update_dprintf_command_list): Remove duplicated
5739 2015-04-20 Thomas Schwinge <thomas@codesourcery.com>
5741 * reply_mig_hack.awk: Robustify parsing.
5743 * reply_mig_hack.awk: Don't bother to declare an intermediate
5744 function pointer variable.
5746 2015-04-17 Doug Evans <dje@google.com>
5748 * solib-svr4.c (svr4_exec_displacement): Rename outer "displacement"
5749 to "exec_displacement" to avoid confusion with inner use of the name.
5751 2015-04-17 Pedro Alves <palves@redhat.com>
5753 * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Return zero
5754 if HW point of TYPE isn't supported.
5756 2015-04-17 Yao Qi <yao.qi@linaro.org>
5757 Pedro Alves <palves@redhat.com>
5759 * target.h (target_can_use_hardware_watchpoint): Update comments.
5760 Remove trailing ";".
5762 2015-04-17 Gary Benson <gbenson@redhat.com>
5764 * remote.c (remote_add_inferior): New argument try_open_exec.
5765 If nonzero, attempt to open the inferior's executable file as
5766 the main executable if no main executable is open already.
5767 All callers updated.
5768 * NEWS: Mention that GDB now supports automatic location and
5769 retrieval of executable + files from remote targets.
5771 2015-04-17 Gary Benson <gbenson@redhat.com>
5773 * target.h (TARGET_OBJECT_EXEC_FILE): New enum value.
5774 * remote.c (PACKET_qXfer_exec_file): Likewise.
5775 (remote_protocol_features): Register the
5776 "qXfer:exec-file:read" feature.
5777 (remote_xfer_partial): Handle TARGET_OBJECT_EXEC_FILE.
5778 (remote_pid_to_exec_file): New function.
5779 (init_remote_ops): Initialize to_pid_to_exec_file.
5780 (_initialize_remote): Register new "set/show remote
5781 pid-to-exec-file-packet" command.
5782 * NEWS: Announce new qXfer:exec-file:read packet.
5784 2015-04-17 Gary Benson <gbenson@redhat.com>
5786 * nat/linux-procfs.h (linux_proc_pid_to_exec_file):
5788 * nat/linux-procfs.c (linux_proc_pid_to_exec_file):
5789 New function, factored out from...
5790 * linux-nat.c (linux_child_pid_to_exec_file): ...here.
5792 2015-04-17 Gary Benson <gbenson@redhat.com>
5794 * exec.c (solist.h): New include.
5795 (exec_file_locate_attach): Prefix absolute executable
5796 paths with gdb_sysroot if set.
5797 * NEWS: Mention that executable paths may be prepended
5800 2015-04-17 Gary Benson <gbenson@redhat.com>
5802 * solist.h (exec_file_find): New declaration.
5803 * solib.c (solib_find_1): New function, factored out from...
5804 (solib_find): ...here.
5805 (exec_file_find): New function.
5807 2015-04-17 Gary Benson <gbenson@redhat.com>
5809 * gdbcore.h (exec_file_locate_attach): New declaration.
5810 * exec.c (exec_file_locate_attach): New function, factored
5812 * infcmd.c (attach_command_post_wait): ...here.
5814 2015-04-17 Mike Frysinger <vapier@gentoo.org>
5816 * MAINTAINERS: Add myself for Blackfin/write-after-approval.
5818 2015-04-16 Yao Qi <yao.qi@linaro.org>
5820 * infrun.c (maybe_software_singlestep): Declare.
5821 (displaced_step_fixup): Call maybe_software_singlestep.
5823 2015-04-15 Doug Evans <dje@google.com>
5825 * psymtab.c (psym_expand_symtabs_matching): Add QUIT call.
5827 2015-04-15 Doug Evans <dje@google.com>
5829 * dwarf2read.c (dw2_expand_symtabs_matching): Add some QUIT calls.
5831 2015-04-15 Simon Marchi <simon.marchi@ericsson.com>
5833 * python/lib/gdb/command/unwinders.py: Add parentheses.
5835 2015-04-15 Yao Qi <yao.qi@linaro.org>
5837 * arm-linux-tdep.c (arm_linux_copy_svc): Update debug message.
5839 2015-04-15 Yao Qi <yao.qi@linaro.org>
5841 * arm-linux-tdep.c (arm_linux_copy_svc): Fix indentation.
5843 2015-04-15 Yao Qi <yao.qi@linaro.org>
5845 * arm-linux-tdep.c (arm_linux_cleanup_svc): Use
5846 dsc->insn_size instead of 4.
5848 2015-04-14 Gary Benson <gbenson@redhat.com>
5850 * jit.c (mem_bfd_iovec_stat): Zero supplied buffer.
5851 * minidebug.c (lzma_stat): Likewise.
5852 * solib-spu.c (spu_bfd_iovec_stat): Likewise.
5853 * spu-linux-nat.c (spu_bfd_iovec_stat): Likewise.
5855 2015-04-13 Stan Shebs <stanshebs@google.com>
5857 * MAINTAINERS: Update my email address.
5859 2015-04-13 John Baldwin <jhb@FreeBSD.org>
5861 * amd64-tdep.c (amd64_target_description): New function.
5862 * amd64-tdep.h: Export amd64_target_description and tdesc_amd64.
5863 * amd64bsd-nat.c [PT_GETXSTATE_INFO]: New variable amd64bsd_xsave_len.
5864 (amd64bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
5865 x86 extended save area.
5866 (amd64bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
5867 * amd64bsd-nat.h: Export amd64bsd_xsave_len.
5868 * amd64fbsd-nat.c (amd64fbsd_read_description): New function.
5869 (_initialize_amd64fbsd_nat): Set "to_read_description" to
5870 "amd64fbsd_read_description".
5871 * amd64fbsd-tdep.c (amd64fbsd_core_read_description): New function.
5872 (amd64fbsd_supply_xstateregset): New function.
5873 (amd64fbsd_collect_xstateregset): New function.
5874 Add "amd64fbsd_xstateregset".
5875 (amd64fbsd_iterate_over_regset_sections): New function.
5876 (amd64fbsd_init_abi): Set "xsave_xcr0_offset" to
5877 "I386_FBSD_XSAVE_XCR0_OFFSET".
5878 Add "iterate_over_regset_sections" gdbarch method.
5879 Add "core_read_description" gdbarch method.
5880 * i386-tdep.c (i386_target_description): New function.
5881 * i386-tdep.h: Export i386_target_description and tdesc_i386.
5882 * i386bsd-nat.c [PT_GETXSTATE_INFO]: New variable i386bsd_xsave_len.
5883 (i386bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
5884 x86 extended save area.
5885 (i386bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
5886 * i386bsd-nat.h: Export i386bsd_xsave_len.
5887 * i386fbsd-nat.c (i386fbsd_read_description): New function.
5888 (_initialize_i386fbsd_nat): Set "to_read_description" to
5889 "i386fbsd_read_description".
5890 * i386fbsd-tdep.c (i386fbsd_core_read_xcr0): New function.
5891 (i386fbsd_core_read_description): New function.
5892 (i386fbsd_supply_xstateregset): New function.
5893 (i386fbsd_collect_xstateregset): New function.
5894 Add "i386fbsd_xstateregset".
5895 (i386fbsd_iterate_over_regset_sections): New function.
5896 (i386fbsd4_init_abi): Set "xsave_xcr0_offset" to
5897 "I386_FBSD_XSAVE_XCR0_OFFSET".
5898 Add "iterate_over_regset_sections" gdbarch method.
5899 Add "core_read_description" gdbarch method.
5900 * i386fbsd-tdep.h: New file.
5902 2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
5904 * NEWS (Changes since GDB 7.9): Add removed -xdb.
5905 * breakpoint.c (command_line_is_silent): Remove xdb_commands
5907 (_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba
5909 * cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and
5911 * cli/cli-decode.c (find_command_name_length): Remove xdb_commands
5913 * defs.h (xdb_commands): Remove declaration.
5914 * f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc.
5915 * guile/scm-cmd.c (command_classes): Remove xdb from comment.
5916 * infcmd.c (run_no_args_command, go_command): Remove.
5917 (_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr.
5918 * infrun.c (xdb_handle_command): Remove.
5919 (_initialize_infrun): Remove xdb_commands for lz and z.
5920 * main.c (xdb_commands): Remove variable.
5921 (captured_main): Remove "xdb" from long_options.
5922 (print_gdb_help): Remove --xdb from help.
5923 * python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment.
5924 * source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?.
5925 * stack.c (backtrace_full_command, args_plus_locals_info)
5926 (current_frame_command): Remove.
5927 (_initialize_stack): Remove xdb_commands for t, T and l.
5928 * symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg.
5929 * thread.c (_initialize_thread): Remove xdb_commands condition.
5930 * tui/tui-layout.c (tui_toggle_layout_command)
5931 (tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove.
5932 (_initialize_tui_layout): Remove xdb_commands for td and ts.
5933 * tui/tui-regs.c (tui_scroll_regs_forward_command)
5934 (tui_scroll_regs_backward_command): Remove.
5935 (_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r.
5936 * tui/tui-win.c (tui_xdb_set_win_height_command): Remove.
5937 (_initialize_tui_win): Remove xdb_commands for U and w.
5938 * utils.c (pagination_on_command, pagination_off_command): Remove.
5939 (initialize_utils): Remove xdb_commands for am and sm.
5941 2015-04-10 Pedro Alves <palves@redhat.com>
5943 * infrun.c (displaced_step_fixup): Switch to the event ptid
5944 earlier. If the thread stopped for a watchpoint and the
5945 target/arch has non-continuable watchpoints, cancel the displaced
5947 (resume): Don't start a displaced step if in-line step-over info
5950 2015-04-10 Pedro Alves <palves@redhat.com>
5952 * infrun.c (displaced_step_in_progress): New function.
5953 (do_target_resume): Advise target to report all signals if
5956 2015-04-10 Pedro Alves <palves@redhat.com>
5959 * infrun.c (process_event_stop_test): Don't assume a step-resume
5960 is set if tp->stepped_breakpoint is true.
5962 2015-04-10 Yao Qi <yao.qi@linaro.org>
5964 * arm-tdep.c (install_alu_reg): Update comment.
5965 (thumb_copy_alu_reg): Remove local variable rn. Update
5966 debugging message. Use r2 instead of r1 in the modified
5969 2015-04-10 Pedro Alves <palves@redhat.com>
5972 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Install
5973 linux_displaced_step_location as gdbarch_displaced_step_location
5975 * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
5976 * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
5977 * linux-tdep.c (linux_displaced_step_location): New function,
5978 based on ppc_linux_displaced_step_location.
5979 * linux-tdep.h (linux_displaced_step_location): New declaration.
5980 * ppc-linux-tdep.c (ppc_linux_entry_point_addr): Delete.
5981 (ppc_linux_inferior_created, ppc_linux_displaced_step_location):
5983 (ppc_linux_init_abi): Install linux_displaced_step_location as
5984 gdbarch_displaced_step_location hook, even without Cell/B.E..
5985 (_initialize_ppc_linux_tdep): Don't install
5986 ppc_linux_inferior_created as inferior_created observer.
5987 * s390-linux-tdep.c (s390_gdbarch_init): Install
5988 linux_displaced_step_location as gdbarch_displaced_step_location
5991 2015-04-09 Gary Benson <gbenson@redhat.com>
5993 * common/common-remote-fileio.h: Rename to...
5994 * common/fileio.h: ...this. Update all references.
5995 (remote_fileio_to_fio_error): Rename to...
5996 (host_to_fileio_error): ...this.
5997 (remote_fileio_to_be): Rename to...
5998 (host_to_bigendian): ...this. Update all callers.
5999 (remote_fileio_to_fio_uint): Rename to...
6000 (host_to_fileio_uint): ...this. Update all callers.
6001 (remote_fileio_to_fio_time): Rename to...
6002 (host_to_fileio_time): ...this. Update all callers.
6003 (remote_fileio_to_fio_stat): Rename to...
6004 (host_to_fileio_stat): ...this.
6005 Update all references.
6006 * common/common-remote-fileio.c: Rename to...
6007 * common/fileio.c: ...this. Update all references.
6008 (remote_fileio_to_fio_error): Rename to...
6009 (host_to_fileio_error): ...this. Update all callers.
6010 (remote_fileio_mode_to_target): Rename to...
6011 (fileio_mode_pack): ...this. Update all callers.
6012 (remote_fileio_to_fio_mode): Rename to...
6013 (host_to_fileio_mode): ...this. Update all callers.
6014 (remote_fileio_to_fio_ulong): Rename to...
6015 (host_to_fileio_ulong): ...this. Update all callers.
6016 (remote_fileio_to_fio_stat): Rename to...
6017 (host_to_fileio_stat): ...this. Update all callers.
6019 2015-04-09 Andy Wingo <wingo@igalia.com>
6021 * guile/scm-frame.c (gdbscm_frame_read_register): New function.
6022 (frame_functions): Bind gdbscm_frame_read_register to
6023 frame-read-register.
6024 * guile/lib/gdb.scm (frame-read-register): Export.
6026 2015-04-09 Gary Benson <gbenson@redhat.com>
6028 * common/common-remote-fileio.h (remote_fileio_to_fio_error):
6030 * common/common-remote-fileio.c (remote_fileio_to_fio_error):
6031 New function, factored out the named functions below.
6032 * inf-child.c (gdb/fileio.h): Remove include.
6033 (common-remote-fileio.h): New include.
6034 (inf_child_errno_to_fileio_error): Remove function. Update
6035 all callers to use remote_fileio_to_fio_error.
6036 * remote-fileio.c (remote_fileio_errno_to_target): Likewise.
6038 2015-04-09 Andy Wingo <wingo@igalia.com>
6040 * MAINTAINERS (Write After Approval): Add Andy Wingo.
6042 2015-04-09 H.J. Lu <hongjiu.lu@intel.com>
6044 * acinclude.m4: (GDB_AC_CHECK_BFD): Set ZLIBDIR with $zlibdir.
6045 Replace $zlibdir with $ZLIBDIR in LDFLAGS.
6046 * configure: Regenerated.
6048 2015-04-09 Pedro Alves <palves@redhat.com>
6050 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add strtok_r.
6051 * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/strtok_r.m4.
6052 * gnulib/configure, gnulib/config.in, gnulib/aclocal.m4: Regenerate.
6053 * gnulib/import/Makefile.am: Update.
6054 * gnulib/import/Makefile.in: Update.
6055 * gnulib/import/m4/gnulib-cache.m4: Update.
6056 * gnulib/import/m4/gnulib-comp.m4: Update.
6057 * gnulib/import/m4/strtok_r.m4: New file.
6058 * gnulib/import/strtok_r.c: New file.
6060 2015-04-09 Pedro Alves <palves@redhat.com>
6062 * gnulib/update-gnulib.sh (aclocal version check): Filter out
6063 "called too early to check prototype".
6065 2015-04-08 Sergio Durigan Junior <sergiodj@redhat.com>
6068 * python/py-cmd.c (cmdpy_completer_helper): Adjust function to not
6069 use a caching mechanism. Adjust comments and code to reflect
6070 that. Replace 'sizeof' by 'strlen' when fetching 'wordobj'.
6071 (cmdpy_completer_handle_brkchars): Adjust call to
6072 cmdpy_completer_helper. Call Py_XDECREF for 'resultobj'.
6073 (cmdpy_completer): Likewise.
6075 2015-04-08 Yao Qi <yao.qi@linaro.org>
6077 * spu-tdep.c (spu_gdbarch_init): Don't call
6078 set_gdbarch_cannot_step_breakpoint.
6080 2015-04-07 Sergio Durigan Junior <sergiodj@redhat.com>
6082 * linux-tdep.c (decode_vmflags): Initialize 'saveptr'.
6084 2015-04-07 Pedro Alves <palves@redhat.com>
6086 * gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): Rename to ...
6087 (ALL_THREADS_SAFE): ... this, and don't skip exited threads.
6088 (delete_exited_threads): New declaration.
6089 * infrun.c (follow_exec): Use ALL_THREADS_SAFE.
6090 * linux-nat.c (linux_nat_update_thread_list): New function.
6091 (linux_nat_add_target): Install it.
6092 * remote.c (remote_update_thread_list): Use ALL_THREADS_SAFE.
6093 * thread.c (prune_threads): Use ALL_THREADS_SAFE.
6094 (delete_exited_threads): New function.
6096 2015-04-07 Pedro Alves <pedro@codesourcery.com>
6098 * infrun.c (resume) <displaced stepping debug output>: Get the
6099 leader thread's regcache, not resume_ptid's.
6101 2015-04-06 Doug Evans <xdje42@gmail.com>
6103 * symtab.c (hash_symbol_entry): Hash STRUCT_DOMAIN symbols as
6105 (symbol_cache_lookup): Clarify use of bsc_ptr, slot_ptr parameters.
6106 Include symbol domain in debugging output.
6108 2015-04-06 Pedro Alves <palves@redhat.com>
6109 Bernd Edlinger <bernd.edlinger@hotmail.de>
6111 * configure.ac: Remove the mingw32-specific stub-termcap.o
6112 fallback, and instead fallback to the stub termcap on all hosts.
6113 * configure: Regenerate.
6114 * stub-termcap.c [!__MINGW32__] (PC, BC, UP): Define as weak
6117 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
6119 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
6120 "top_level" parameter.
6121 (resolve_dynamic_type_internal): Remove the unused "top_level"
6122 parameter. Update call to is_dynamic_type_internal.
6123 (is_dynamic_type): Update call to is_dynamic_type_internal.
6124 (resolve_dynamic_range): Update call to
6125 resolve_dynamic_type_internal.
6126 (resolve_dynamic_union): Likewise.
6127 (resolve_dynamic_struct): Likewise.
6128 (resolve_dynamic_type): Likewise.
6130 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
6132 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
6133 TYPE_CODE_REF types so that they are not considered as dynamic
6134 depending on the referenced type.
6135 (resolve_dynamic_type_internal): Likewise.
6137 2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
6139 * Makefile.in (top_srcdir): New.
6140 * configure: Regenerated.
6142 2015-04-02 Gary Benson <gbenson@redhat.com>
6144 * NEWS: Announce the new default sysroot of "target:".
6146 2015-04-02 Gary Benson <gbenson@redhat.com>
6148 * main.c (captured_main): Set gdb_sysroot to "target:"
6149 if not otherwise set.
6151 2015-04-02 Gary Benson <gbenson@redhat.com>
6153 * exec.c (exec_file_attach): Support "target:" filenames.
6155 2015-04-02 Gary Benson <gbenson@redhat.com>
6157 * solib.c (solib_find): Strip "target:" prefix from sysroot
6158 if accessing local files.
6160 2015-04-02 Gary Benson <gbenson@redhat.com>
6162 * symfile.c (symfile_bfd_open): Reorder to remove duplicated
6163 checks and error messages.
6165 2015-04-02 Gary Benson <gbenson@redhat.com>
6167 * remote.h (REMOTE_SYSROOT_PREFIX): Remove definition.
6168 (remote_filename_p): Remove declaration.
6169 (remote_bfd_open): Likewise.
6170 * remote.c (remote_bfd_iovec_open): Remove function.
6171 (remote_bfd_iovec_close): Likewise.
6172 (remote_bfd_iovec_pread): Likewise.
6173 (remote_bfd_iovec_stat): Likewise.
6174 (remote_filename_p): Likewise.
6175 (remote_bfd_open): Likewise.
6176 * symfile.h (gdb_bfd_open_maybe_remote): Remove declaration.
6177 * symfile.c (separate_debug_file_exists): Use gdb_bfd_open.
6178 (gdb_bfd_open_maybe_remote): Remove function.
6179 (symfile_bfd_open): Replace remote filename check with
6180 target filename check.
6181 (reread_symbols): Use gdb_bfd_open.
6182 * build-id.c (gdbcore.h): New include.
6183 (build_id_to_debug_bfd): Use gdb_bfd_open.
6184 * infcmd.c (attach_command_post_wait): Remove remote filename
6186 * solib.c (solib_find): Replace remote-specific handling with
6187 target-specific handling. Update comments where necessary.
6188 (solib_bfd_open): Replace remote-specific handling with
6189 target-specific handling.
6190 (gdb_sysroot_changed): New function.
6191 (_initialize_solib): Call the above when gdb_sysroot changes.
6192 * windows-tdep.c (gdbcore.h): New include.
6193 (windows_xfer_shared_library): Use gdb_bfd_open.
6195 2015-04-02 Gary Benson <gbenson@redhat.com>
6197 * gdb/gdb_bfd.h (TARGET_SYSROOT_PREFIX): New definition.
6198 (is_target_filename): New declaration.
6199 (gdb_bfd_has_target_filename): Likewise.
6200 (gdb_bfd_open): Update documentation comment.
6201 * gdb_bfd.c (target.h): New include.
6202 (gdb/fileio.h): Likewise.
6203 (is_target_filename): New function.
6204 (gdb_bfd_has_target_filename): Likewise.
6205 (fileio_errno_to_host): Likewise.
6206 (gdb_bfd_iovec_fileio_open): Likewise.
6207 (gdb_bfd_iovec_fileio_pread): Likewise.
6208 (gdb_bfd_iovec_fileio_close): Likewise.
6209 (gdb_bfd_iovec_fileio_fstat): Likewise.
6210 (gdb_bfd_open): Use target fileio to access paths prefixed
6211 with "target:" where necessary.
6213 2015-04-02 Gary Benson <gbenson@redhat.com>
6215 * target.h (struct target_ops) <to_filesystem_is_local>:
6217 (target_filesystem_is_local): New macro.
6218 * target-delegates.c: Regenerate.
6219 * remote.c (remote_filesystem_is_local): New function.
6220 (init_remote_ops): Initialize to_filesystem_is_local.
6222 2015-04-02 Gary Benson <gbenson@redhat.com>
6224 * target.h (struct target_ops) <to_fileio_fstat>: New field.
6225 (target_fileio_fstat): New declaration.
6226 * target.c (target_fileio_fstat): New function.
6227 * inf-child.c (inf_child_fileio_fstat): Likewise.
6228 (inf_child_target): Initialize to_fileio_fstat.
6229 * remote.c (init_remote_ops): Likewise.
6231 2015-04-01 Sasha Smundak <asmundak@google.com>
6233 * Makefile.in (SUBDIR_PYTHON_OBJS): Add py-unwind.o.
6234 (SUBDIR_PYTHON_SRCS): Add py-unwind.c.
6235 (py-unwind.o): New recipe.
6236 * NEWS: mention Python frame unwinding.
6237 * data-directory/Makefile.in (PYTHON_FILE_LIST): Add
6238 gdb/unwinder.py and gdb/command/unwinder.py
6239 * python/lib/gdb/__init__.py (packages): Add frame_unwinders
6241 (execute_unwinders): New function.
6242 * python/lib/gdb/command/unwinders.py: New file.
6243 * python/lib/gdb/unwinder.py: New file.
6244 * python/py-objfile.c (objfile_object): Add frame_unwinders field.
6245 (objfpy_dealloc): Decrement frame_unwinders reference count.
6246 (objfpy_initialize): Create frame_unwinders list.
6247 (objfpy_get_frame_unwinders): New function.
6248 (objfpy_set_frame_unwinders): Ditto.
6249 (objfile_getset): Add frame_unwinders attribute to Objfile.
6250 * python/py-progspace.c (pspace_object): Add frame_unwinders field.
6251 (pspy_dealloc): Decrement frame_unwinders reference count.
6252 (pspy_initialize): Create frame_unwinders list.
6253 (pspy_get_frame_unwinders): New function.
6254 (pspy_set_frame_unwinders): Ditto.
6255 (pspy_getset): Add frame_unwinders attribute to gdb.Progspace.
6256 * python/py-unwind.c: New file.
6257 * python/python-internal.h (pspy_get_name_unwinders): New prototype.
6258 (objpy_get_frame_unwinders): New prototype.
6259 (gdbpy_initialize_unwind): New prototype.
6260 * python/python.c (gdbpy_apply_type_printers): Call
6261 gdbpy_initialize_unwind.
6263 2015-04-01 Pedro Alves <palves@redhat.com>
6265 * infrun.c (resume): Check currently_stepping after clearing
6266 stepped_breakpoint, not before.
6268 2015-04-01 Pedro Alves <palves@redhat.com>
6270 * infrun.c (print_target_wait_results): Print all the ptid
6273 2015-04-01 Pedro Alves <palves@redhat.com>
6275 * infrun.c (keep_going): Also discard cleanups if inserting
6278 2015-04-01 Pedro Alves <palves@redhat.com>
6280 * infrun.c (wait_for_inferior): Install the
6281 finish_thread_state_cleanup cleanup across the whole function, not
6282 just around handle_inferior_event.
6284 2015-04-01 Pedro Alves <palves@redhat.com>
6286 * infrun.c (resume) <step past permanent breakpoint>: Use
6289 2015-04-01 Pedro Alves <palves@redhat.com>
6291 * linux-nat.c (linux_handle_extended_wait): Always call set_running.
6293 2015-04-01 Pierre-Marie de Rodat <derodat@adacore.com>
6295 * MAINTAINERS (Write After Approval): Add "Pierre-Marie de Rodat".
6297 2015-04-01 Pedro Alves <palves@redhat.com>
6299 * linux-thread-db.c (record_thread): Readd the thread to gdb's
6300 list if it was marked exited.
6302 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
6304 * configure: Regenerated.
6306 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
6307 Jan Kratochvil <jan.kratochvil@redhat.com>
6308 Oleg Nesterov <oleg@redhat.com>
6311 * linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'.
6312 New enum identifying the various options of the coredump_filter
6314 (struct smaps_vmflags): New struct.
6315 (use_coredump_filter): New variable.
6316 (decode_vmflags): New function.
6317 (mapping_is_anonymous_p): Likewise.
6318 (dump_mapping_p): Likewise.
6319 (linux_find_memory_regions_full): New variables
6320 'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'.
6321 Removed variable 'modified'. Read /proc/<PID>/smaps file; improve
6322 parsing of its information. Implement memory mapping filtering
6323 based on its contents.
6324 (show_use_coredump_filter): New function.
6325 (_initialize_linux_tdep): New command 'set use-coredump-filter'.
6326 * NEWS: Mention the possibility of using the
6327 '/proc/PID/coredump_filter' file when generating a corefile.
6328 Mention new command 'set use-coredump-filter'.
6330 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
6332 * solib-svr4.c (solib_svr4_r_ldsomap): Catch possible exception by
6333 read_memory_unsigned_integer.
6335 2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
6337 * Makefile.in (ZLIB): New.
6338 (ZLIBINC): Likewise.
6339 (INTERNAL_CFLAGS_BASE): Add $(ZLIBINC).
6340 (CLIBS): Add $(ZLIB).
6341 * acinclude.m4: (GDB_AC_CHECK_BFD): Add $zlibdir to LDFLAGS.
6343 * gdb_bfd.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
6344 * top.c (print_gdb_configuration): Remove --with-zlib and
6346 * config.in: Regenerated.
6347 * configure: Likewise.
6349 2015-03-31 Antoine Tremblay <antoine.tremblay@ericsson.com>
6351 * NEWS: Mention info os cpus support.
6352 * gdb/nat/linux-osdata.c (linux_xfer_osdata_cpus): New function.
6353 (struct osdata_type): Add cpus entry, reorder the entries in
6356 2015-03-31 Matthias Klose <doko@ubuntu.com>
6358 * compile/compile.c (compile_to_object): Allow triplets with or
6361 2015-03-30 Doug Evans <dje@google.com>
6364 * cp-namespace.c (cp_search_static_and_baseclasses): Always look for
6365 klass in VAR_DOMAIN.
6367 2015-03-30 Gary Benson <gbenson@redhat.com>
6369 * remote.c (remote_mourn_1): Remove function. Update all callers
6370 to use remote_mourn.
6371 (extended_remote_mourn_1): Remove function. Update all callers
6372 to use extended_remote_mourn.
6373 (extended_remote_attach_1): Remove function. Update all callers
6374 to use extended_remote_attach.
6376 2015-03-28 James Bowman <james.bowman@ftdichip.com>
6378 * Makefile.in (ALL_TARGET_OBS): Add ft32-tdep.o.
6379 (HFILES_NO_SRCDIR): Add ft32-tdep.h.
6380 (ALLDEPFILES): Add ft32-tdep.c.
6381 * configure.tgt: Add FT32 entry.
6382 * ft32-tdep.c: New file, FT32 target-dependent code.
6383 * ft32-tdep.h: New file, FT32 target-dependent code.
6385 2015-03-27 Jan Kratochvil <jan.kratochvil@redhat.com>
6388 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
6390 * printcmd.c (print_command_1): Move expr variable scope.
6392 2015-03-27 Joel Brobecker <brobecker@adacore.com>
6394 * dtrace-probe.c (dtrace_process_dof_probe): Initialize expr to NULL.
6396 2015-03-27 Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
6398 * gdb_bfd.c (gdb_bfd_section_index): Fix off-by-one for special
6401 2015-03-26 Joel Brobecker <brobecker@adacore.com>
6403 * dtrace-probe.c (dtrace_process_dof_probe): Contain any
6404 exception raised while parsing the probe arguments.
6405 Force parsing to be done using the C language parser.
6406 * expression.h (parse_expression_with_language): Declare.
6407 * parse.c (parse_expression_with_language): New function.
6409 2015-03-26 Jon Turney <jon.turney@dronecode.org.uk>
6411 * MAINTAINERS (Write After Approval): Add "Jon Turney".
6413 2015-03-26 Andy Wingo <wingo@igalia.com>
6416 * dwarf2read.c (struct partial_die_info): Add has_const_value
6418 (add_partial_symbol): Don't punt on symbols that have const_value
6420 (read_partial_die): Detect DW_AT_const_value.
6422 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
6425 * printcmd.c (print_command_1): Move expr variable scope.
6427 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
6430 * printcmd.c (validate_format): Make the parameter cmdname const.
6432 2015-03-26 Don Breazeal <donb@codesourcery.com>
6434 * remote.c (_initialize_remote): Update comment.
6436 2015-03-26 Pedro Alves <palves@redhat.com>
6437 Jon TURNEY <jon.turney@dronecode.org.uk>
6439 * coffread.c (coff_symfile_read): When constructing the name of an
6440 import stub symbol from import symbol for amd64, only skip the
6441 char after _imp_ if the target is underscored (like i386) and the
6442 char is indeed the target's leading char.
6444 2015-03-25 Pedro Alves <palves@redhat.com>
6446 * target.h <to_async>: Replace 'callback' and 'context' parameters
6447 with boolean 'enable' parameter.
6448 (target_async): Replace CALLBACK and CONTEXT parameters with
6449 boolean ENABLE parameter.
6450 * inf-loop.c (inferior_event_handler): Adjust.
6451 * linux-nat.c (linux_nat_attach, linux_nat_resume)
6452 (linux_nat_resume): Adjust.
6453 (async_client_callback, async_client_context): Delete.
6454 (handle_target_event): Call inferior_event_handler directly.
6455 (linux_nat_async): Replace 'callback' and 'context' parameters
6456 with boolean 'enable' parameter. Adjust. Remove references to
6457 async_client_callback and async_client_context.
6458 (linux_nat_close): Adjust.
6459 * record-btrace.c (record_btrace_async): Replace 'callback' and
6460 'context' parameters with boolean 'enable' parameter. Adjust.
6461 (record_btrace_resume): Adjust.
6462 * record-full.c (record_full_async): Replace 'callback' and
6463 'context' parameters with boolean 'enable' parameter. Adjust.
6464 (record_full_resume, record_full_core_resume): Adjust.
6465 * remote.c (struct remote_state) <async_client_callback,
6466 async_client_context>: Delete fields.
6467 (remote_start_remote, extended_remote_attach_1, remote_resume)
6468 (extended_remote_create_inferior): Adjust.
6469 (remote_async_serial_handler): Call inferior_event_handler
6471 (remote_async): Replace 'callback' and 'context' parameters with
6472 boolean 'enable' parameter. Adjust.
6473 * top.c (gdb_readline_wrapper_cleanup, gdb_readline_wrapper):
6475 * target-delegates.c: Regenerate.
6477 2015-03-25 Gary Benson <gbenson@redhat.com>
6478 Pedro Alves <palves@redhat.com>
6480 * target.c (fileio_ft_t): New typedef, define object vector.
6481 (fileio_fhandles): New static variable.
6482 (is_closed_fileio_fh): New macro.
6483 (lowest_closed_fd): New static variable.
6484 (acquire_fileio_fd): New function.
6485 (release_fileio_fd): Likewise.
6486 (fileio_fd_to_fh): New macro.
6487 (target_fileio_open): Wrap the file descriptor on success.
6488 (target_fileio_pwrite): Updated to use wrapped file descriptor.
6489 (target_fileio_pread): Likewise.
6490 (target_fileio_close): Likewise.
6492 2015-03-24 Pedro Alves <palves@redhat.com>
6494 * thread.c (thread_apply_all_command): Take exited threads into
6497 2015-03-24 Pedro Alves <palves@redhat.com>
6499 * infrun.c (resume, proceed): Mention
6500 switch_back_to_stepped_thread, not switch_back_to_stepping.
6502 2015-03-24 Pedro Alves <palves@redhat.com>
6504 * infrun.c (user_visible_resume_ptid): Rewrite going from
6505 most-locked to unlocked instead of the opposite. Move comment ...
6506 * infrun.h (user_visible_resume_ptid): ... here.
6508 2015-03-24 Pedro Alves <palves@redhat.com>
6510 * linux-nat.c (linux_nat_resume): Output debug logs before trying
6511 to resume the event lwp. Use the lwp's ptid instead of the passed
6512 in (maybe wildcard) ptid.
6513 (stop_wait_callback): Tweak debug log output.
6514 (check_stopped_by_breakpoint): Tweak debug log output. Also dump
6516 (linux_nat_filter_event): In debug output, distinguish a
6517 resume_stop SIGSTOP from a delayed SIGSTOP. Output debug logs
6518 before trying to resume the lwp.
6520 2015-03-24 Joel Brobecker <brobecker@adacore.com>
6522 * gdbtypes.h (struct dynamic_prop_list) <prop>: Remove
6523 pointer indirection.
6524 * gdbtypes.c (get_dyn_prop): Adjust, following change above.
6525 (add_dyn_prop, copy_dynamic_prop_list): Likewise.
6527 2015-03-24 Joel Brobecker <brobecker@adacore.com>
6529 * gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_DATA_LOCATION>:
6530 Renames DYN_ATTR_DATA_LOCATION.
6531 (TYPE_DATA_LOCATION): Use DYN_PROP_DATA_LOCATION instead of
6532 DYN_ATTR_DATA_LOCATION.
6533 * dwarf2read.c (set_die_type): Use DYN_PROP_DATA_LOCATION
6534 instead of DYN_ATTR_DATA_LOCATION.
6536 2015-03-24 Pedro Alves <palves@redhat.com>
6538 * breakpoint.c (until_break_command): Adjust call to proceed.
6539 * gdbthread.h (struct thread_control_state) <stepping_command>:
6541 * infcall.c (run_inferior_call): Adjust call to proceed.
6542 * infcmd.c (run_command_1, proceed_thread_callback, continue_1):
6543 Adjust calls to proceed.
6544 (set_step_frame): Set the current thread's step_start_function
6546 (step_once): Adjust calls to proceed.
6547 (jump_command, signal_command, until_next_command)
6548 (finish_backward, finish_forward, proceed_after_attach_callback)
6549 (attach_command_post_wait): Adjust calls to proceed.
6550 * infrun.c (proceed_after_vfork_done): Adjust call to proceed.
6551 (do_target_resume): New function, factored out from ...
6552 (resume): ... here. Remove 'step' parameter. Instead, check
6553 currently_stepping to determine whether the thread should be
6555 (proceed): Remove 'step' parameter and don't set the thread's
6556 step_start_function here. Adjust call to 'resume'.
6557 (handle_inferior_event): Adjust calls to 'resume'.
6558 (switch_back_to_stepped_thread): Use do_target_resume instead of
6560 (keep_going): Adjust calls to 'resume'.
6561 * infrun.h (proceed): Remove 'step' parameter.
6563 * windows-nat.c (do_initial_windows_stuff): Adjust call to
6565 * mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
6567 2015-03-24 Pedro Alves <palves@redhat.com>
6569 * gdbthread.h (struct thread_control_state) <stepping_command>:
6571 * infcmd.c (step_once): Pass step=1 to clear_proceed_status. Set
6572 the thread's stepping_command field.
6573 * infrun.c (resume): Check the thread's stepping_command flag to
6574 determine which threads should be resumed. Rename 'entry_step'
6576 (clear_proceed_status_thread): Clear 'stepping_command'.
6577 (schedlock_applies): Change parameter type to struct thread_info
6579 (find_thread_needs_step_over): Remove 'step' parameter. Adjust.
6580 (switch_back_to_stepped_thread): Adjust calls to
6581 'schedlock_applies'.
6582 (_initialize_infrun): Adjust "set scheduler-locking step" help.
6584 2015-03-24 Pedro Alves <palves@redhat.com>
6586 * infrun.c (step_start_function): Delete and ...
6587 * gdbthread.h (struct thread_control_state) <step_start_function>:
6588 ... now a field here.
6589 * infrun.c (clear_proceed_status_thread): Clear the thread's
6590 step_start_function.
6591 (proceed, process_event_stop_test, print_stop_event): Adjust.
6593 2015-03-24 Pedro Alves <palves@redhat.com>
6595 * infrun.c (proceed): No longer handle negative step.
6597 2015-03-24 Gary Benson <gbenson@redhat.com>
6599 * nat/x86-linux.h (x86_linux_new_thread): New declaration.
6600 (x86_linux_prepare_to_resume): Likewise.
6601 * x86-linux-nat.c (x86_linux_new_thread):
6602 Moved to nat/x86-linux.c.
6603 (x86_linux_prepare_to_resume): Likewise.
6604 * nat/x86-linux.c (x86_linux_new_thread): New function.
6605 (x86_linux_prepare_to_resume): Likewise.
6607 2015-03-24 Gary Benson <gbenson@redhat.com>
6609 * nat/x86-linux-dregs.h: New file.
6610 * nat/x86-linux-dregs.c: Likewise.
6611 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
6612 (x86-linux-dregs.o): New rule.
6613 * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
6614 * config/i386/linux64.mh (NATDEPFILES): Likewise.
6615 * x86-linux-nat.c: Include nat/x86-linux-dregs.h.
6616 (u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
6617 (x86_linux_dr_get): Likewise.
6618 (x86_linux_dr_set): Likewise.
6619 (x86_linux_dr_get_addr): Likewise.
6620 (x86_linux_dr_get_control): Likewise.
6621 (x86_linux_dr_get_status): Likewise.
6622 (update_debug_registers_callback): Likewise.
6623 (x86_linux_dr_set_control): Likewise.
6624 (x86_linux_dr_set_addr): Likewise.
6625 (x86_linux_update_debug_registers): Likewise.
6627 2015-03-24 Gary Benson <gbenson@redhat.com>
6629 * x86-linux-nat.c (x86_linux_update_debug_registers):
6630 New function, factored out from...
6631 (x86_linux_prepare_to_resume): ...this.
6633 2015-03-24 Gary Benson <gbenson@redhat.com>
6635 * x86-linux-nat.c (x86_linux_dr_get): Update comments.
6636 (x86_linux_dr_set): Likewise.
6637 (x86_linux_dr_get_addr): Likewise.
6638 (x86_linux_dr_get_control): Likewise.
6639 (x86_linux_dr_get_status): Likewise.
6640 (update_debug_registers_callback): Likewise.
6641 (x86_linux_dr_set_control): Likewise.
6642 (x86_linux_dr_set_addr): Likewise.
6643 (x86_linux_prepare_to_resume): Likewise.
6644 (x86_linux_new_thread): Likewise.
6646 2015-03-24 Gary Benson <gbenson@redhat.com>
6648 * x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion.
6649 (x86_linux_new_thread): Rename argument.
6651 2015-03-24 Gary Benson <gbenson@redhat.com>
6653 * nat/x86-linux.h: New file.
6654 * nat/x86-linux.c: Likewise.
6655 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
6656 (x86-linux.o): New rule.
6657 * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
6658 * config/i386/linux64.mh (NATDEPFILES): Likewise.
6659 * nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
6660 (lwp_set_arch_private_info): New declaration.
6661 (lwp_arch_private_info): Likewise.
6662 * linux-nat.c (lwp_set_arch_private_info): New function.
6663 (lwp_arch_private_info): Likewise.
6664 * x86-linux-nat.c: Include nat/x86-linux.h.
6665 (arch_lwp_info): Removed structure.
6666 (update_debug_registers_callback):
6667 Use lwp_set_debug_registers_changed.
6668 (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
6669 and lwp_set_debug_registers_changed.
6670 (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
6672 2015-03-24 Gary Benson <gbenson@redhat.com>
6674 * nat/linux-nat.h (ptid_of_lwp): New declaration.
6675 (lwp_is_stopped): Likewise.
6676 (lwp_stop_reason): Likewise.
6677 * linux-nat.c (ptid_of_lwp): New function.
6678 (lwp_is_stopped): Likewise.
6679 (lwp_is_stopped_by_watchpoint): Likewise.
6680 * x86-linux-nat.c (update_debug_registers_callback):
6682 (x86_linux_prepare_to_resume): Use ptid_of_lwp and
6685 2015-03-24 Gary Benson <gbenson@redhat.com>
6687 * linux-nat.h (linux_stop_lwp): Move declaration to...
6688 * nat/linux-nat.h (linux_stop_lwp): New declaration.
6690 2015-03-24 Gary Benson <gbenson@redhat.com>
6692 * linux-nat.h: Include nat/linux-nat.h.
6693 (iterate_over_lwps): Move declaration to nat/linux-nat.h.
6694 * nat/linux-nat.h (struct lwp_info): New forward declaration.
6695 (iterate_over_lwps_ftype): New typedef.
6696 (iterate_over_lwps): New declaration.
6697 * linux-nat.h (iterate_over_lwps): Update comment. Use
6698 iterate_over_lwps_ftype. Update callback return value check.
6700 2015-03-24 Gary Benson <gbenson@redhat.com>
6702 * x86-nat.h (x86_debug_reg_state): Move declaration to...
6703 * nat/x86-dregs.h (x86_debug_reg_state): New declaration.
6705 2015-03-24 Gary Benson <gbenson@redhat.com>
6707 * nat/linux-nat.h (current_lwp_ptid): New declaration.
6708 * linux-nat.c (current_lwp_ptid): New function.
6709 * x86-linux-nat.c: Include nat/linux-nat.h.
6710 (x86_linux_dr_get_addr): Use current_lwp_ptid.
6711 (x86_linux_dr_get_control): Likewise.
6712 (x86_linux_dr_get_status): Likewise.
6713 (x86_linux_dr_set_control): Likewise.
6714 (x86_linux_dr_set_addr): Likewise.
6716 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
6718 PR breakpoints/16466
6719 * breakpoint.c (create_breakpoint): Set thread on breakpoint struct.
6721 2015-03-23 Joel Brobecker <brobecker@adacore.com>
6723 * ser-mingw.c (ser_windows_setparity): Fix indentation.
6724 * ser-unix.c (hardwire_setparity): Likewise.
6726 2015-03-23 Yurij Grechishhev <yurij.grechishhev@gmail.com>
6728 * NEWS: Mention set/show serial parity command.
6729 * monitor.c (monitor_open): Call serial_setparity.
6730 * remote.c (remote_open_1): Likewise.
6731 * ser-base.c (ser_base_serparity): New function.
6732 * ser-base.h (ser_base_setparity): Add declaration.
6733 * ser-go32.c (dos_ops): Set "setparity" field.
6734 * ser-mingw.c (ser_windows_raw): Do not set state.fParity and
6736 (ser_windows_setparity): New function.
6737 (hardwire_ops): Add ser_windows_setparity.
6738 (tty_ops): Add NULL for setparity field.
6739 (pipe_ops): Add ser_base_setparity.
6740 (tcp_ops): Likewise.
6741 * ser-pipe.c (pipe_ops): Likewise.
6742 * ser-tcp.c (tcp_ops): Likewise.
6743 * ser-unix.c (hardwire_setparity): Add declaration.
6744 (hardwire_raw): Don't reset PARENB flag.
6745 (hardwire_setparity): New function.
6746 (hardwire_ops): Add hardwire_setparity.
6747 * serial.c (serial_setparity): New function.
6748 (serial_parity): New global.
6749 (parity_none, parity_odd, parity_even, parity_enums, parity):
6751 (set_parity): New function.
6752 (_initialize_serial): Add set/show serial parity commands.
6753 * serial.h (GDBPARITY_NONE): Define.
6754 (GDBPARITY_ODD): Define.
6755 (GDBPARITY_EVEN): Define.
6756 (serial_setparity) Add declaration.
6757 (struct serial_ops): Add setparity field.
6758 * target.h (serial_parity): Add declaration.
6760 2015-03-23 Keith Seitz <keiths@redhat.com>
6762 * linespec.c (linespec_lexer_lex_keyword): Update comment.
6764 2015-03-23 Keith Seitz <keiths@redhat.com>
6766 * breakpoint.c (parse_breakpoint_sals): Use
6767 linespec_lexer_lex_keyword to ascertain if the user specified
6769 * linespec.c [IF_KEYWORD_INDEX]: Define.
6770 (linespec_lexer_lex_keyword): Export.
6771 (struct ls_parser) <keyword_ok>: Remove.
6772 A keyword is only a keyword if not followed by another keyword.
6773 (linespec_lexer_lex_one): Remove keyword_ok handling.
6774 Add comment explaining why the parsing stream is not advanced
6775 when a keyword is seen.
6776 (parse_linespec): Remove parser->keyword_ok.
6777 * linespec.h (linespec_lexer_lex_keyword): Add declaration.
6779 2015-03-23 Keith Seitz <keiths@redhat.com>
6782 * dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
6783 if we find a static method with DW_AT_vtable_elem_location.
6785 2015-03-21 Eli Zaretskii <eliz@gnu.org>
6787 * tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
6788 before the second loop, to avoid undefined behavior. Reported by
6789 Anton Blanchard <anton@samba.org>.
6791 2015-03-20 Keven Boell <keven.boell@intel.com>
6793 * gdbtypes.c (resolve_dynamic_type_internal): Adapt
6794 data_location usage to linked list.
6795 (resolve_dynamic_type_internal): Adapt data_location to
6797 (get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
6798 (copy_type_recursive, copy_type): Add copy of linked list.
6799 * gdbtypes.h (enum dynamic_prop_node_kind): New enum.
6800 (struct dynamic_prop_list): New struct.
6801 * dwarf2read.c (set_die_type): Set data_location data.
6803 2015-03-20 Pedro Alves <palves@redhat.com>
6805 * i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
6806 inner block and make it const.
6807 * machoread.c (get_archive_prefix_len): Make "lparen" const.
6809 2015-03-20 Pedro Alves <palves@redhat.com>
6811 * breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
6812 * breakpoint.h (set_breakpoint_condition): Update declaration.
6814 2015-03-20 Pedro Alves <palves@redhat.com>
6816 * tui/tui-io.c (tui_expand_tabs): Make "s1" const.
6818 2015-03-20 Pedro Alves <palves@redhat.com>
6820 * xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
6822 2015-03-20 Pedro Alves <palves@redhat.com>
6824 * remote-m32r-sdi.c (m32r_open): Make "port_str" const.
6826 2015-03-20 Pedro Alves <palves@redhat.com>
6828 * nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
6829 (nto_init_solib_absolute_prefix): Likewise.
6831 2015-03-20 Pedro Alves <palves@redhat.com>
6833 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
6834 * spu-tdep.c (spu_gdbarch_init): Make "name" const.
6836 2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
6838 * config/djgpp/README: Remove gdb.hp.
6840 2015-03-20 Yao Qi <yao.qi@linaro.org>
6842 * aarch64-tdep.c (aarch64_gdbarch_init): Don't call
6843 set_gdbarch_cannot_step_breakpoint.
6845 2015-03-19 Pedro Alves <palves@redhat.com>
6847 * linux-nat.c (linux_resume_one_lwp): Rename to ...
6848 (linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
6849 instead call perror_with_name.
6850 (check_ptrace_stopped_lwp_gone): New function.
6851 (linux_resume_one_lwp): Reimplement as wrapper around
6852 linux_resume_one_lwp_throw that swallows errors if the LWP is
6854 (resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
6855 swallows errors if the LWP is gone. Use
6856 linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
6858 2015-03-19 Pedro Alves <palves@redhat.com>
6860 * linux-nat.c (status_callback): Return early if the LWP has no
6863 2015-03-19 Pedro Alves <palves@redhat.com>
6865 * linux-nat.c (select_event_lwp_callback): Update comment to no
6866 longer mention SIGTRAP.
6868 2015-03-18 Tristan Gingold <gingold@adacore.com>
6870 * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
6871 redirection code to ...
6872 (amd64_windows_frame_decode_insns): ... Here. Fix in prologue
6873 checks. Fix SAVE_NONVOL operations. Add debug code and comments.
6875 2015-03-18 Gary Benson <gbenson@redhat.com>
6877 (remote_protocol_features): Remove the "vFile:fstat" feature.
6878 (remote_hostio_fstat): Probe for "vFile:fstat" support.
6880 2015-03-11 Yao Qi <yao.qi@linaro.org>
6883 * aarch64-linux-tdep.c: Include xml-syscall.h
6884 (aarch64_linux_get_syscall_number): New function.
6885 (aarch64_linux_init_abi): Call
6886 set_gdbarch_get_syscall_number.
6887 * syscalls/aarch64-linux.xml: New file.
6889 2015-03-17 Yurij Grechishhev <yurij.grechishhev@gmail.com>
6891 * ser-base.h (ser_base_setstopbits): Change second argument name
6892 from "rate" to "num".
6894 2015-03-17 Gary Benson <gbenson@redhat.com>
6895 Luke Allardyce <lukeallardyce@gmail.com>
6898 * common/common-remote-fileio.h (sys/stat.h): New include.
6899 (stuct stat): Remove forward declaration.
6901 2015-03-16 John Baldwin <jhb@FreeBSD.org>
6903 * fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
6904 before writing core register notes.
6906 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
6907 Pedro Alves <palves@redhat.com>
6909 * gdb_curses.h (tgetnum): Mark with EXTERN_C.
6910 * stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
6911 (tgoto): Wrap with extern "C".
6913 2015-03-16 Pedro Alves <palves@redhat.com>
6914 Yuanhui Zhang <asmwarrior@gmail.com>
6916 * stub-termcap.c (tputs): Change prototype.
6918 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
6919 Pedro Alves <palves@redhat.com>
6921 * windows-nat.c (struct thread_info_struct): Rename to ...
6922 (struct windows_thread_info_struct): ... this.
6923 (thread_info): Rename to ...
6924 (windows_thread_info): ... this.
6927 2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
6928 Pedro Alves <palves@redhat.com>
6930 * NEWS: New Removed targets and native configurations.
6932 2015-03-13 Jan Kratochvil <jan.kratochvil@redhat.com>
6935 * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
6936 (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
6937 (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
6938 ia64-hpux-tdep.h, solib-ia64-hpux.h.
6939 (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
6940 ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
6941 * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
6943 * config/ia64/hpux.mh: Remove file.
6944 * config/pa/hpux.mh: Remove file.
6945 * configure: Rebuilt.
6946 * configure.ac (dlgetmodinfo, somread.o): Remove.
6947 * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
6948 (ia64-*-hpux*): Remove its float format exception.
6949 * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
6950 * hppa-hpux-nat.c: Remove file.
6951 * hppa-hpux-tdep.c: Remove file.
6952 * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
6953 Move them here from hppa-tdep.h
6954 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
6955 (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
6956 * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
6957 Move them to hppa-tdep.c.
6958 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
6960 * ia64-hpux-nat.c: Remove file.
6961 * ia64-hpux-tdep.c: Remove file.
6962 * ia64-hpux-tdep.h: Remove file.
6963 * inf-ttrace.c: Remove file.
6964 * inf-ttrace.h: Remove file.
6965 * solib-ia64-hpux.c: Remove file.
6966 * solib-ia64-hpux.h: Remove file.
6967 * solib-pa64.c: Remove file.
6968 * solib-pa64.h: Remove file.
6969 * solib-som.c: Remove file.
6970 * solib-som.h: Remove file.
6971 * somread.c: Remove file.
6973 2015-03-13 John Baldwin <jhb@FreeBSD.org>
6975 * configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
6976 * config.in: Regenerate.
6977 * configure: Regenerate.
6978 * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
6980 (fbsd_find_memory_regions): Use kinfo_getvmmap to
6981 enumerate memory regions if present.
6983 2015-03-13 John Baldwin <jhb@FreeBSD.org>
6985 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
6986 * i386fbsd-tdep.c: Fix style in various gdb_static_assert
6988 (i386fbsd_sigtramp_p): Likewise.
6990 2015-03-12 John Baldwin <jhb@FreeBSD.org>
6992 * MAINTAINERS (Write After Approval): Add John Baldwin.
6994 2015-03-12 Gary Benson <gbenson@redhat.com>
6996 * solib.c (_initialize_solib): Make "set/show sysroot" use
6997 add_setshow_optional_filename_cmd so it can be restored to
6998 empty after being set.
7000 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
7002 * Makefile.in (SFILES): New source break-catch-syscall.c.
7003 (COMMON_OBS): New object break-catch-syscall.o.
7004 * break-catch-syscall.c: New file.
7005 * breakpoint.c: Remove inclusion of "xml-syscall.h".
7006 (syscall_catchpoint_p): Move declaration to break-catch-syscall.c
7007 (struct syscall_catchpoint): Likewise.
7008 (dtor_catch_syscall): Likewise.
7009 (catch_syscall_inferior_data): Likewise.
7010 (struct catch_syscall_inferior_data): Likewise.
7011 (get_catch_syscall_inferior_data): Likewise.
7012 (catch_syscall_inferior_data_cleanup): Likewise.
7013 (insert_catch_syscall): Likewise.
7014 (remove_catch_syscall): Likewise.
7015 (breakpoint_hit_catch_syscall): Likewise.
7016 (print_it_catch_syscall): Likewise.
7017 (print_one_catch_syscall): Likewise.
7018 (print_mention_catch_syscall): Likewise.
7019 (print_recreate_catch_syscall): Likewise.
7020 (catch_syscall_breakpoint_ops): Likewise.
7021 (syscall_catchpoint_p): Likewise.
7022 (create_syscall_event_catchpoint): Likewise.
7023 (catch_syscall_split_args): Likewise.
7024 (catch_syscall_command_1): Likewise.
7025 (is_syscall_catchpoint_enabled): Likewise.
7026 (catch_syscall_enabled): Likewise.
7027 (catching_syscall_number): Likewise.
7028 (catch_syscall_completer): Likewise.
7029 (clear_syscall_counts): Likewise.
7030 (initialize_breakpoint_ops): Move initialization of syscall
7031 catchpoints to break-catch-syscall.c.
7032 (_initialize_breakpoint): Move code related to syscall catchpoints
7033 to break-catch-syscall.c.
7035 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
7037 * breakpoint.c (breakpoint_find_if): New function.
7038 * breakpoint.h (breakpoint_find_if): New prototype.
7040 2015-03-11 Gary Benson <gbenson@redhat.com>
7042 * remote-fileio.h (remote_fileio_to_host_stat): New declaration.
7043 * remote-fileio.c (remote_fileio_to_host_uint): New function.
7044 (remote_fileio_to_host_ulong): Likewise.
7045 (remote_fileio_to_host_mode): Likewise.
7046 (remote_fileio_to_host_time): Likewise.
7047 (remote_fileio_to_host_stat): Likewise.
7048 * remote.c (PACKET_vFile_fstat): New enum value.
7049 (remote_protocol_features): Register the "vFile:fstat" feature.
7050 (remote_hostio_fstat): New function.
7051 (remote_bfd_iovec_stat): Use the above.
7052 (_initialize_remote): Register new "set/show remote
7053 hostio-fstat-packet" command.
7054 * symfile.c (separate_debug_file_exists): Update comment.
7055 * NEWS: Announce new vFile:fstat packet.
7057 2015-03-11 Gary Benson <gbenson@redhat.com>
7059 * common/common-remote-fileio.h: New file.
7060 * common/common-remote-fileio.c: Likewise.
7061 * Makefile.in (SFILES): Add common/common-remote-fileio.c.
7062 (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
7063 (COMMON_OBS): Add common-remote-fileio.o.
7064 (common-remote-fileio.o): New rule.
7065 * remote-fileio.h (common-remote-fileio.h): New include.
7066 * remote-fileio.c (gdb/fileio.h): Do not include.
7067 (remote_fileio_to_be): Moved to common-remote-fileio.h.
7068 (remote_fileio_to_fio_uint): Likewise.
7069 (remote_fileio_to_fio_time): Likewise.
7070 (remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
7071 (remote_fileio_to_fio_mode): Likewise.
7072 (remote_fileio_to_fio_ulong): Likewise.
7073 (remote_fileio_to_fio_stat): Likewise.
7075 2015-03-11 Andy Wingo <wingo@igalia.com>
7077 * guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
7078 we were checking the cached type, not the cached dynamic type.
7080 2015-03-11 Andy Wingo <wingo@igalia.com>
7082 * guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
7083 other strings, as these are on the GC'd heap, and will be
7084 collected along with the smob.
7086 2015-03-11 Andy Wingo <wingo@igalia.com>
7088 * guile/scm-objfile.c (gdbscm_objfile_progspace): New function.
7089 (objfile_functions): Bind gdbscm_objfile_progspace to
7091 * guile/lib/gdb.scm: Add objfile-progspace to exports.
7093 2015-03-11 Andy Wingo <wingo@igalia.com>
7095 * guile/guile.c (_initialize_guile): Disable automatic
7096 finalization, if Guile offers us that possibility.
7097 * guile/guile.c (call_initialize_gdb_module):
7098 * guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
7099 finalizers in appropriate places.
7100 * configure.ac (AC_TRY_LIBGUILE): Add a check for
7101 scm_set_automatic_finalization_enabled.
7102 * configure: Regenerated.
7104 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
7106 * s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
7109 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
7111 * s390-linux-nat.c (struct arch_lwp_info): New.
7112 (s390_fix_watch_points): Rename to...
7113 (s390_prepare_to_resume): ...this. Skip the PER info update
7114 unless the watch points have changed.
7115 (s390_refresh_per_info, s390_new_thread): New functions.
7116 (s390_insert_watchpoint): Call s390_refresh_per_info instead of
7117 s390_fix_watch_points.
7118 (s390_remove_watchpoint): Likewise.
7119 (_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
7120 Register s390_prepare_to_resume.
7122 2015-03-09 Pedro Alves <palves@redhat.com>
7125 2015-03-07 Pedro Alves <palves@redhat.com>
7126 * common/gdb_socket.h: New file.
7127 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
7129 (net_open): Use union gdb_sockaddr_u.
7131 2015-03-07 Pedro Alves <palves@redhat.com>
7133 * configure.ac (build_warnings): Move -Wmissing-prototypes
7134 -Wdeclaration-after-statement -Wmissing-parameter-type
7135 -Wold-style-declaration -Wold-style-definition to the C-specific
7137 * configure: Regenerate.
7139 2015-03-07 Pedro Alves <palves@redhat.com>
7141 * common/gdb_socket.h: New file.
7142 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
7144 (net_open): Use union gdb_sockaddr_u.
7146 2015-03-07 Pedro Alves <palves@redhat.com>
7148 * common/common-exceptions.c [!__cplusplus] (enum catcher_state)
7149 (exceptions_state_mc_action_iter)
7150 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
7152 [__cplusplus] (try_scope_depth): New global.
7153 [__cplusplus] (exception_try_scope_entry)
7154 (exception_try_scope_exit, gdb_exception_sliced_copy)
7155 (exception_rethrow): New functions.
7156 (throw_exception): In C++ mode, throw
7157 gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
7158 gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
7159 (throw_it): In C++ mode, use try_scope_depth.
7160 * common/common-exceptions.h [!__cplusplus]
7161 (exceptions_state_mc_action_iter)
7162 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
7164 [__cplusplus] (exception_try_scope_entry)
7165 (exception_try_scope_exit, exception_rethrow): Declare.
7166 [__cplusplus] (struct exception_try_scope): New struct.
7167 [__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
7169 (struct gdb_exception_RETURN_MASK_ALL)
7170 (struct gdb_exception_RETURN_MASK_ERROR)
7171 (struct gdb_exception_RETURN_MASK_QUIT): New types.
7173 2015-03-07 Pedro Alves <palves@redhat.com>
7175 * main.c (handle_command_errors): Remove volatile qualifier from
7178 2015-03-07 Pedro Alves <palves@redhat.com>
7180 * breakpoint.c (save_breakpoints): Adjust to avoid code between
7182 * gdbtypes.c (safe_parse_type): Remove empty line.
7183 (types_deeply_equal):
7184 * guile/scm-frame.c (gdbscm_frame_name):
7185 * linux-thread-db.c (find_new_threads_once):
7186 * python/py-breakpoint.c (bppy_get_commands):
7187 * record-btrace.c (record_btrace_insert_breakpoint)
7188 (record_btrace_remove_breakpoint, record_btrace_start_replaying)
7189 (record_btrace_start_replaying): Adjust to avoid code between TRY
7192 2015-03-07 Pedro Alves <palves@redhat.com>
7194 * common/common-exceptions.c (struct catcher) <exception>: No
7195 longer a pointer to volatile exception. Now an exception value.
7196 <mask>: Delete field.
7197 (exceptions_state_mc_init): Remove all parameters. Adjust.
7198 (exceptions_state_mc): No longer pop the catcher here.
7199 (exceptions_state_mc_catch): New function.
7200 (throw_exception): Adjust.
7201 * common/common-exceptions.h (exceptions_state_mc_init): Remove
7203 (exceptions_state_mc_catch): Declare.
7204 (TRY_CATCH): Rename to ...
7205 (TRY): ... this. Remove EXCEPTION and MASK parameters.
7206 (CATCH, END_CATCH): New.
7207 All callers adjusted.
7209 2015-03-07 Tom Tromey <tromey@redhat.com>
7211 * top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX.
7213 2015-03-07 Pedro Alves <palves@redhat.com>
7215 * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
7216 (amd64_epilogue_frame_cache): Normal exception handling code.
7217 * break-catch-throw.c (check_status_exception_catchpoint)
7218 (re_set_exception_catchpoint): Ditto.
7219 * cli/cli-interp.c (safe_execute_command):
7220 * cli/cli-script.c (script_from_file): Ditto.
7221 * compile/compile-c-symbols.c (generate_c_for_for_one_variable):
7223 * compile/compile-object-run.c (compile_object_run): Ditto.
7224 * cp-abi.c (baseclass_offset): Ditto.
7225 * cp-valprint.c (cp_print_value): Ditto.
7226 * exceptions.c (catch_exceptions_with_msg):
7227 * frame-unwind.c (frame_unwind_try_unwinder): Ditto.
7228 * frame.c (get_frame_address_in_block_if_available): Ditto.
7229 * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
7230 (i386_sigtramp_frame_cache): Ditto.
7231 * infcmd.c (post_create_inferior): Ditto.
7232 * linespec.c (parse_linespec, find_linespec_symbols):
7233 * p-valprint.c (pascal_object_print_value): Ditto.
7234 * parse.c (parse_expression_for_completion): Ditto.
7235 * python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
7236 * remote.c (remote_get_noisy_reply): Ditto.
7237 * s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
7238 * solib-svr4.c (solib_svr4_r_map): Ditto.
7240 2015-03-06 Gary Benson <gbenson@redhat.com>
7242 * common/common-utils.h (startswith): New inline function.
7243 All places where this logic was used updated to use the above.
7245 2015-03-05 Pedro Alves <palves@redhat.com>
7248 * mem-break.c (default_memory_insert_breakpoint): Set shadow_len
7249 after reading the breakpoint's shadow memory.
7251 2015-03-05 Mark Kettenis <kettenis@gnu.org>
7253 * hppabsd-nat.c: Remove file.
7254 * hppaobsd-nat.c: New file.
7255 * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c. Add
7257 * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
7260 2015-03-04 Pedro Alves <palves@redhat.com>
7262 * target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
7263 (target_decr_pc_after_break): Delete declaration.
7264 * target.c (default_target_decr_pc_after_break)
7265 (target_decr_pc_after_break): Delete.
7266 * linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
7267 gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
7268 * linux-thread-db.c (check_event): Likewise.
7269 * infrun.c (adjust_pc_after_break): Likewise.
7270 * darwin-nat.c (cancel_breakpoint): Likewise.
7271 * aix-thread.c (aix_thread_wait): Likewise.
7272 * target-delegates.c: Regenerate.
7274 2015-03-04 Pedro Alves <palves@redhat.com>
7276 * linux-nat.c (save_sigtrap): Check for breakpoints before
7277 checking watchpoints.
7278 (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a
7279 breakpoint is inserted if relying on SIGTRAP's siginfo.si_code.
7280 (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether
7281 a breakpoint triggered based on the SIGTRAP's siginfo.si_code.
7282 (linux_nat_stopped_by_sw_breakpoint)
7283 (linux_nat_supports_stopped_by_sw_breakpoint)
7284 (linux_nat_stopped_by_hw_breakpoint)
7285 (linux_nat_supports_stopped_by_hw_breakpoint): New functions.
7286 (linux_nat_wait_1): Don't re-increment the PC if relying on
7287 SIGTRAP's siginfo->si_code.
7288 (linux_nat_add_target): Install new target methods.
7289 * linux-thread-db.c (check_event): Don't account for breakpoint PC
7290 offset if the target already adjusted the PC.
7291 * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New.
7292 (GDB_ARCH_TRAP_BRKPT): New.
7293 (TRAP_HWBKPT): Define if not already defined.
7295 2015-03-04 Pedro Alves <palves@redhat.com>
7297 * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
7298 * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
7300 <stop_reason>: New field.
7301 (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
7302 (packet_set_cmd_state): New function.
7303 (remote_protocol_features): Register the "swbreak" and "hwbreak"
7305 (remote_query_supported): If not disabled with the corresponding
7306 "set remote foo-packet" command, report support for the swbreak
7307 and hwbreak features.
7308 (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
7310 <stop_reason>: New field.
7311 (remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
7312 (remote_wait_as): Adjust.
7313 (remote_stopped_by_sw_breakpoint)
7314 (remote_supports_stopped_by_sw_breakpoint)
7315 (remote_stopped_by_hw_breakpoint)
7316 (remote_supports_stopped_by_hw_breakpoint): New functions.
7317 (remote_stopped_by_watchpoint): New function.
7318 (init_remote_ops): Install them.
7319 (_initialize_remote): Register new "set/show remote
7320 swbreak-feature-packet" and "set/show remote
7321 swbreak-feature-packet" commands.
7323 2015-03-04 Pedro Alves <palves@redhat.com>
7325 * btrace.h: Include target/waitstatus.h.
7326 (struct btrace_thread_info) <stop_reason>: New field.
7327 * record-btrace.c (record_btrace_step_thread): Use
7328 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
7329 (record_btrace_decr_pc_after_break): Delete.
7330 (record_btrace_stopped_by_sw_breakpoint)
7331 (record_btrace_supports_stopped_by_sw_breakpoint)
7332 (record_btrace_stopped_by_hw_breakpoint)
7333 (record_btrace_supports_stopped_by_hw_breakpoint): New functions.
7334 (init_record_btrace_ops): Install them.
7335 * record-full.c (record_full_hw_watchpoint): Delete and replace
7337 (record_full_stop_reason): ... this throughout.
7338 (record_full_exec_insn): Adjust.
7339 (record_full_wait_1): Adjust. No longer re-increment the PC.
7340 (record_full_wait_1): Adjust. Use
7341 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
7342 (record_full_stopped_by_watchpoint): Adjust.
7343 (record_full_stopped_by_sw_breakpoint)
7344 (record_full_supports_stopped_by_sw_breakpoint)
7345 (record_full_supports_stopped_by_sw_breakpoint)
7346 (record_full_stopped_by_hw_breakpoint)
7347 (record_full_supports_stopped_by_hw_breakpoint): New functions.
7348 (init_record_full_ops, init_record_full_core_ops): Install them.
7349 * record.c (record_check_stopped_by_breakpoint): New function.
7350 * record.h: Include target/waitstatus.h.
7351 (record_check_stopped_by_breakpoint): New declaration.
7353 2015-03-04 Pedro Alves <palves@redhat.com>
7355 enum lwp_stop_reason -> enum target_stop_reason
7356 * linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint)
7357 (linux_nat_stopped_by_watchpoint, status_callback)
7358 (linux_nat_wait_1): Adjust.
7359 * linux-nat.h (enum lwp_stop_reason): Delete.
7360 (struct lwp_info) <stop_reason>: Now an enum target_stop_reason.
7361 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
7362 * target/waitstatus.h (enum target_stop_reason): New.
7364 2015-03-04 Pedro Alves <palves@redhat.com>
7366 * breakpoint.c (need_moribund_for_location_type): New function.
7367 (bpstat_stop_status): Don't skipping checking moribund locations
7368 of breakpoint types which the target tell caused a stop.
7369 (program_breakpoint_here_p): New function, factored out from ...
7370 (bp_loc_is_permanent): ... this.
7371 (update_global_location_list): Don't create a moribund location if
7372 the target supports reporting stops of the type of the removed
7374 * breakpoint.h (program_breakpoint_here_p): New declaration.
7375 * infrun.c (adjust_pc_after_break): Return early if the target has
7376 already adjusted the PC. Add comments.
7377 (handle_signal_stop): If nothing explains a signal, and the target
7378 tells us the stop was caused by a software breakpoint, check if
7379 there's a breakpoint instruction in the memory. If so, adjust the
7380 PC before presenting the stop to the user. Otherwise, ignore the
7381 trap. If nothing explains a signal, and the target tells us the
7382 stop was caused by a hardware breakpoint, ignore the trap.
7383 * target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
7384 to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
7385 to_supports_stopped_by_hw_breakpoint>: New fields.
7386 (target_stopped_by_sw_breakpoint)
7387 (target_supports_stopped_by_sw_breakpoint)
7388 (target_stopped_by_hw_breakpoint)
7389 (target_supports_stopped_by_hw_breakpoint): Define.
7390 * target-delegates.c: Regenerate.
7392 2015-03-04 Pedro Alves <palves@redhat.com>
7394 * infrun.c (follow_fork_inferior): Use the whole of the
7395 inferior_ptid and pending_follow.related_pid ptids instead of
7396 building ptids from the process components. Adjust verbose output
7397 to use target_pid_to_str.
7398 * linux-nat.c (linux_child_follow_fork): Use the whole of the
7399 inferior_ptid and pending_follow.related_pid ptids instead of
7400 building ptids from the process components.
7402 2015-03-04 Mark Kettenis <kettenis@gnu.org>
7404 * inf-ptrace.c [PT_GET_PROCESS_STATE]
7405 (inf_ptrace_insert_fork_catchpoint): New function.
7406 (inf_ptrace_remove_fork_catchpoint): New function.
7407 (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.
7409 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
7411 * s390-linux-tdep.c (s390_register_name): Return empty string
7412 instead of NULL for registers that shouldn't be visible.
7414 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
7416 * s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
7417 XML file for 64-bit targets.
7419 2015-03-03 Simon Marchi <simon.marchi@ericsson.com>
7421 * target.h (find_default_create_inferior): Remove declaration.
7422 (find_default_attach): Likewise.
7424 2015-03-03 Pedro Alves <palves@redhat.com>
7426 * inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
7427 Use ptid_get_pid to get the overall process id when resuming all
7430 2015-03-03 Pedro Alves <palves@redhat.com>
7432 * i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
7433 the lwp field of ptid. Pass the full ptid to get_thread_regcache.
7434 * inf-ptrace.c (get_ptrace_pid): New function.
7435 (inf_ptrace_resume): Use it.
7436 * linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
7439 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
7441 * nat/linux-btrace.c: Include sys/utsname.h.
7442 (linux_determine_kernel_ptr_bits): New.
7443 (linux_enable_bts): Call linux_determine_kernel_ptr_bits.
7444 * x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
7447 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
7449 * btrace.c (ftrace_update_function): Treat return as tailcall for
7450 "_dl_runtime_resolve".
7452 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
7454 * btrace.h (btrace_function) <lbegin, lend>: Remove.
7455 * btrace.c (ftrace_debug): Do not print the line range.
7456 (ftrace_skip_file, ftrace_update_lines): Remove.
7457 (ftrace_new_function): Remove lbegin and lend initialization.
7458 (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
7459 * record-btrace.c (btrace_compute_src_line_range): New.
7460 (btrace_call_history_src_line): Call btrace_compute_src_line_range.
7462 2015-03-02 Pedro Alves <palves@redhat.com>
7464 * infrun.c (follow_exec): Delete all threads of the process except
7465 the event thread. Extended comments.
7467 2015-03-02 Joel Brobecker <brobecker@adacore.com>
7469 * contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".
7471 2015-03-02 Joel Brobecker <brobecker@adacore.com>
7473 * utils.h: Remove <stdbool.h> #include.
7474 (producer_is_gcc): Change return type to "int".
7475 * utils.c (producer_is_gcc): Change return type to int.
7476 Return 1 instead of true, and 0 instead of false.
7477 Adjust function documentation accordingly.
7479 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
7481 * s390-linux-nat.c (have_regset_vxrs): New static variable.
7482 (s390_linux_fetch_inferior_registers): Handle vector registers, if
7484 (s390_linux_store_inferior_registers): Likewise.
7485 (s390_get_hwcap): Remove function. Embed its logic...
7486 (s390_read_description): ...here. Yield a target description with
7487 vector registers if applicable.
7488 * s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
7489 "features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
7490 "features/s390x-tevx-linux64.c".
7491 (struct gdbarch_tdep) <v0_full_regnum>: New field.
7492 (s390_dwarf_regmap): Add vector registers. Remove bogus entries
7493 for "GNU/Linux-specific registers".
7494 (s390_dwarf_reg_r0l): New enum value.
7495 (s390_dwarf_reg_to_regnum): Support vector registers.
7496 (s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
7497 of GPR lower halves.
7498 (regnum_is_vxr_full): New function.
7499 (s390_register_name): New function.
7500 (s390_pseudo_register_name): Handle v0-v15, which are composed of
7501 f0-f15 and v0l-v15l.
7502 (s390_pseudo_register_type): Likewise.
7503 (s390_pseudo_register_read): Likewise.
7504 (s390_pseudo_register_write): Likewise.
7505 (s390_value_from_register): Account for the fact that values are
7506 placed left-justified in vector registers.
7507 (s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
7508 the vector reggroup and omit them from the general reggroup.
7509 (s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
7510 (s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
7511 (s390_iterate_over_regset_sections): Add iterations for the two
7513 (s390_core_read_description): Yield a target description with
7514 vector registers if applicable.
7515 (s390_gdbarch_init): Handle target descriptions with vector
7516 registers. Add "register_name" gdbarch method.
7517 (_initialize_s390_tdep): Call new tdesc initialization functions.
7518 * s390-linux-tdep.h (HWCAP_S390_VX): New macro.
7519 (S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
7520 (S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
7521 (S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
7522 (S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
7523 (S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
7524 (S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
7525 (S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
7526 (S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
7527 (S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
7528 (S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
7529 (S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
7530 (S390_V30_REGNUM, S390_V31_REGNUM): New macros.
7531 (S390_NUM_REGS): Adjust value.
7532 (s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
7533 (tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
7534 (tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
7535 * NEWS: Announce S/390 vector register support.
7537 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
7539 * features/s390-tevx-linux64.xml: New file.
7540 * features/s390-vx-linux64.xml: New file.
7541 * features/s390-vx.xml: New file.
7542 * features/s390x-tevx-linux64.xml: New file.
7543 * features/s390x-vx-linux64.xml: New file.
7544 * features/Makefile (WHICH): Add s390-vx-linux64,
7545 s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
7546 (s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
7547 (s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
7549 * features/s390-tevx-linux64.c: New generated file.
7550 * features/s390-vx-linux64.c: Likewise.
7551 * features/s390x-tevx-linux64.c: Likewise.
7552 * features/s390x-vx-linux64.c: Likewise.
7553 * regformats/s390-tevx-linux64.dat: Likewise.
7554 * regformats/s390-vx-linux64.dat: Likewise.
7555 * regformats/s390x-tevx-linux64.dat: Likewise.
7556 * regformats/s390x-vx-linux64.dat: Likewise.
7558 2015-02-28 Doug Evans <xdje42@gmail.com>
7560 * symtab.h (struct symtab) <next>: Fix comment.
7562 2015-02-27 Simon Marchi <simon.marchi@ericsson.com>
7564 * python/python.c (python_GdbModuleDef): Rename GdbMethods to
7567 2015-02-27 Pedro Alves <palves@redhat.com>
7569 * dtrace-probe.c (dtrace_probe_ops): Make extern.
7571 2015-02-27 Pedro Alves <palves@redhat.com>
7573 * common/common-exceptions.h (exception_none): Declare.
7574 * common/common-exceptions.c (exception_none): Moved from
7576 (exceptions_state_mc_init): Use exception_none.
7577 * exceptions.c (exception_none): Move to
7578 common/common-exceptions.c.
7579 * exceptions.h (exception_none): Move to
7580 common/common-exceptions.h.
7582 2015-02-27 Pedro Alves <palves@redhat.com>
7584 * main.c (catch_command_errors, catch_command_errors_const):
7585 Remove 'mask' argument. Adjust.
7586 (captured_main): Adjust callers.
7588 2015-02-27 Pedro Alves <palves@redhat.com>
7590 * python/python-internal.h: Include "extension-priv.h".
7592 2015-02-27 Pedro Alves <palves@redhat.com>
7594 * breakpoint.h (enum print_stop_action): Move further up in the
7597 2015-02-27 Pedro Alves <palves@redhat.com>
7599 * gdbarch.sh: Include regcache.h.
7600 * gdbarch.h: Regenerate.
7602 2015-02-27 Pedro Alves <palves@redhat.com>
7604 * arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>:
7605 Remove duplicate const.
7606 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove
7609 2015-02-27 Pedro Alves <palves@redhat.com>
7611 * cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST.
7612 * guile/guile.c (extension_language_guile): Use EXPORTED_CONST.
7613 * features/feature_to_c.sh: Tag the generated xml_builtin array
7614 with extern const in C++ mode.
7616 2015-02-27 Tom Tromey <tromey@redhat.com>
7618 * minidebug.c (struct lzma_stream): Rename to ...
7619 (struct gdb_lzma_stream): ... this.
7620 (lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust.
7622 2015-02-27 Pedro Alves <palves@redhat.com>
7624 * mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New
7626 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args)
7627 (mi_cmd_stack_list_variables): Use it.
7629 2015-02-27 Pedro Alves <palves@redhat.com>
7631 * x86-linux-nat.c (u_debugreg_offset): New function.
7632 (x86_linux_dr_get, x86_linux_dr_set): Use it.
7634 2015-02-27 Pedro Alves <palves@redhat.com>
7636 * nat/x86-dregs.h (enum target_hw_bp_type): Remove forward
7638 Include break-common.h.
7640 2015-02-27 Tom Tromey <tromey@redhat.com>
7641 Pedro Alves <palves@redhat.com>
7643 * arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
7644 local used to iterate over enums.
7645 * completer.c (signal_completer): Likewise.
7646 * i386-tdep.c (i386_stap_parse_special_token): Likewise.
7647 * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
7648 * tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
7649 * tui/tui-layout.c (next_layout, prev_layout): Likewise.
7650 * tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
7651 (tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
7652 * tui-wingeneral.c (tui_refresh_all): Likewise.
7654 2015-02-27 Pedro Alves <palves@redhat.com>
7656 * target.h: Include "infrun.h".
7658 2015-02-27 Pedro Alves <palves@redhat.com>
7660 * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
7662 2015-02-27 Pedro Alves <palves@redhat.com>
7664 * common/agent.h (IPA_SYM_EXPORTED_NAME): New.
7666 * common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.
7668 2015-02-27 Pedro Alves <palves@redhat.com>
7670 * cli-out.c (_rl_erase_entire_line): Move declaration out of
7671 cli_mld_erase_entire_line, and make it extern "C".
7672 * common/common-defs.h (EXTERN_C): New.
7673 * completer.c (_rl_completion_prefix_display_length)
7674 (_rl_print_completions_horizontally, QSFUNC): Move declarations
7675 out of gdb_display_match_list_1.
7676 (_rl_qsort_string_compare): Move declaration out of
7677 gdb_display_match_list_1, and make it extern "C".
7678 * defs.h (re_comp): Use EXTERN_C.
7679 * maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
7680 and make it extern "C".
7681 (monstartup): Move declaration out of maintenance_set_profile_cmd,
7682 and make it extern "C".
7683 (main): Move declaration out of maintenance_set_profile_cmd.
7684 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
7687 2015-02-27 Pedro Alves <palves@redhat.com>
7689 * python/python.c (GdbMethods): Rename to ...
7690 (python_GdbMethods): ... this and make extern.
7691 (GdbModuleDef): Rename to ...
7692 (python_GdbModuleDef): ... this and make extern.
7694 2015-02-27 Pedro Alves <palves@redhat.com>
7696 * record-btrace.c (set_record_btrace_cmdlist)
7697 (show_record_btrace_cmdlist): Remove redefinitions.
7699 2015-02-27 Tom Tromey <tromey@redhat.com>
7700 Pedro Alves <palves@redhat.com>
7702 * dwarf2-frame.c (enum cfa_how_kind, struct
7703 dwarf2_frame_state_reg_info): Move out of struct
7705 * dwarf2read.c (struct tu_stats): Move out of struct
7707 (struct file_entry): Move out of struct line_header.
7708 (struct nextfield, struct nextfnfield, struct fnfieldlist, struct
7709 typedef_field_list): Move out of struct field_info.
7710 * gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
7711 Move out of struct dynamic_prop.
7712 (union type_owner, union field_location, struct field, struct
7713 range_bounds, union type_specific): Move out of struct main_type.
7714 (struct fn_fieldlist, struct fn_field, struct typedef_field)
7715 (VOFFSET_STATIC): Move out of struct cplus_struct_type.
7716 (struct call_site_target, union call_site_parameter_u, struct
7717 call_site_parameter): Move out of struct call_site.
7718 * m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
7720 (enum srcdest_kind): Move out of struct srcdest.
7721 * main.c (enum cmdarg_kind): Move out of struct cmdarg.
7722 * prologue-value.h (enum prologue_value_kind): Move out of struct
7724 * s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
7726 * stabsread.c (struct nextfield, struct next_fnfieldlist): Move
7727 out of struct field_info.
7728 * symfile.h (struct other_sections): Move out of struct
7730 * symtab.c (struct symbol_cache_slot): Move out struct
7732 * target-descriptions.c (enum tdesc_type_kind): Move out of
7733 typedef struct tdesc_type.
7734 * tui/tui-data.h (enum tui_line_or_address_kind): Move out of
7735 struct tui_line_or_address.
7736 * value.c (enum internalvar_kind, union internalvar_data): Move
7737 out of struct internalvar.
7738 * xtensa-tdep.h (struct ctype_cache): Move out of struct
7741 2015-02-27 Tom Tromey <tromey@redhat.com>
7742 Pedro Alves <palves@redhat.com>
7744 Rename symbols whose names are reserved C++ keywords throughout.
7746 2015-02-27 Pedro Alves <palves@redhat.com>
7748 * Makefile.in (COMPILER): New, get it from autoconf.
7749 (COMPILE.pre, CC_LD): Use COMPILER.
7750 (CXX): Get from autoconf instead.
7751 (CXX_FOR_TARGET): Default to g++ instead of gcc.
7752 * acinclude.m4: Include build-with-cxx.m4.
7753 * build-with-cxx.m4: New file.
7754 * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
7755 Disable -Werror by default if building in C++ mode.
7756 (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
7757 -Wno-narrowing in C++ mode. Only enable -Wpointer-sign in C mode.
7758 Run supported-warning-flags tests with the C++ compiler.
7759 Save/restore CXXFLAGS too.
7760 * configure: Regenerate.
7762 2015-02-27 Pedro Alves <palves@redhat.com>
7764 * libiberty.m4: New file.
7765 * acinclude.m4: Include libiberty.m4.
7766 * configure.ac: Call libiberty_INIT.
7767 * config.in, configure: Regenerate.
7769 2015-02-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
7771 * s390-linux-tdep.c (s390_gcc_target_options): Not just handle
7772 31-bit targets, but 64-bit targets as well.
7773 (s390_gnu_triplet_regexp): New function.
7774 (s390_gdbarch_init): Set the gcc_target_options gdbarch method for
7775 64-bit targets as well. Set the gnu_triplet_regexp gdbarch
7778 2015-02-27 Jon TURNEY <jon.turney@dronecode.org.uk> (tiny patch)
7780 * windows-nat.c (CONTEXT_DEBUGGER): Remove.
7781 (CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS. Incorporate flags
7782 from CONTEXT_DEBUGGER.
7784 2015-02-26 Doug Evans <dje@google.com>
7786 * gdbtypes.c (internal_type_vptr_fieldno): Add missing call to
7788 (set_type_vptr_fieldno): Ditto.
7789 (internal_type_vptr_basetype, set_type_vptr_basetype): Ditto.
7790 * gnu-v3-abi.c (gnuv3_dynamic_class): Ditto.
7792 2015-02-26 Pedro Alves <palves@redhat.com>
7794 * auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
7795 * complaints.c (vcomplaint): Pass argument FMT directly to
7796 printf-like functions instead of complaint->fmt.
7797 * ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
7798 * darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
7799 * compile/compile-loc2c.c (pushf, unary, binary): Add
7801 (do_compile_dwarf_expr_to_c): Pass string literal as format string
7803 (BINARY): Pass string literal as format string to 'binary'.
7804 * compile/compile-object-load.c (link_callbacks_einfo): Add
7806 * guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.
7808 2015-02-26 Pedro Alves <palves@redhat.com>
7810 * windows-termcap.c: Rename to ...
7811 * stub-termcap.c: ... this. Adjust header line.
7812 * Makefile.in (SFILES): Refer to stub-termcap.c instead of
7814 * configure: Regenerate.
7815 * configure.ac: Refer to stub-termcap.o instead of
7817 * gdb_curses.h: Mention stub-termcap.c instead of
7820 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
7822 * compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
7823 (gcc_symbol_address): Call gnu_ifunc_resolve_addr.
7825 2015-02-26 Antoine Tremblay <antoine.tremblay@ericsson.com>
7827 * gdb/infcmd.c (print_return_value): use type_to_string to print type.
7829 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
7831 * elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
7832 bfd_canonicalize_symtab.
7834 2015-02-25 John Baldwin <jhb@FreeBSD.org>
7836 * amd64fbsd-nat.c: Include sys/user.h.
7837 (_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
7838 instead of KERN_PS_STRINGS to locate the signal trampoline.
7839 * i386fbsd-nat.c: Include sys/user.h.
7840 (_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
7841 instead of KERN_PS_STRINGS to locate the signal trampoline.
7842 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New.
7843 (amd64fbsd_sigtramp_p): New.
7844 (amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No
7845 longer set default values.
7846 (amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p".
7847 * i386fbsd-tdep.c (i386fbsd_sigtramp_start)
7848 (i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end)
7849 (i386fbsd_freebsd4_sigtramp_start)
7850 (i386fbsd_freebsd4_sigtramp_middle)
7851 (i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start)
7852 (i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New.
7853 (i386fbsd_sigtramp_p): New.
7854 (i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No
7855 longer set default values.
7856 (i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p".
7858 2015-02-25 John Baldwin <jhb@freebsd.org>
7860 * amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use
7861 get_frame_register instead of frame_unwind_register_unsigned.
7863 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
7866 * compile/compile-c-support.c (c_compute_program): Change // comment.
7867 * compile/compile-object-load.c (setup_sections): Change // comment.
7869 2015-02-26 Joel Brobecker <brobecker@adacore.com>
7872 * iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment.
7874 2015-02-23 Pedro Alves <palves@redhat.com>
7876 * remote.c (skip_to_semicolon): New function.
7877 (remote_parse_stop_reply) <T stop reply>: Use it. Don't
7878 special case the stop reasons that look like hex numbers
7879 upfront. Instead handle real register numbers after matching
7880 all the known stop reasons.
7882 2015-02-21 Doug Evans <dje@google.com>
7884 PR c++/17976, symtab/17821
7885 * cp-namespace.c (cp_search_static_and_baseclasses): New parameter
7886 is_in_anonymous. All callers updated.
7887 (find_symbol_in_baseclass): Ditto.
7888 (cp_lookup_nested_symbol_1): Ditto. Don't search all static blocks
7889 for symbols in an anonymous namespace.
7890 * dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
7891 DW_AT_name directly.
7892 (dwarf2_name): Convert missing namespace name to
7893 CP_ANONYMOUS_NAMESPACE_STR.
7895 2015-02-20 Pedro Alves <palves@redhat.com>
7897 * linux-nat.c (linux_handle_extended_wait): Call
7898 thread_db_notice_clone whenever a new clone LWP is detected.
7899 (linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
7901 * linux-nat.h (thread_db_attach_lwp): Delete declaration.
7902 (thread_db_notice_clone, linux_stop_and_wait_all_lwps)
7903 (linux_unstop_all_lwps): Declare.
7904 * linux-thread-db.c (struct thread_get_info_inout): Delete.
7905 (thread_get_info_callback): Delete.
7906 (thread_from_lwp): Use td_thr_get_info and record_thread.
7907 (thread_db_attach_lwp): Delete.
7908 (thread_db_notice_clone): New function.
7909 (try_thread_db_load_1): If /proc is mounted and shows the
7910 process'es task list, walk over all LWPs and call thread_from_lwp
7911 instead of relying on td_ta_thr_iter.
7912 (attach_thread): Don't call check_thread_signals here. Split the
7913 tail part of the function (which adds the thread to the core GDB
7915 (record_thread): ... this function. Call check_thread_signals
7917 (thread_db_wait): Don't call thread_db_find_new_threads_1. Always
7918 call thread_from_lwp.
7919 (thread_db_update_thread_list): Rename to ...
7920 (thread_db_update_thread_list_org): ... this.
7921 (thread_db_update_thread_list): New function.
7922 (thread_db_find_thread_from_tid): Delete.
7923 (thread_db_get_ada_task_ptid): Simplify.
7924 * nat/linux-procfs.c: Include <sys/stat.h>.
7925 (linux_proc_task_list_dir_exists): New function.
7926 * nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.
7928 2015-02-20 Pedro Alves <palves@redhat.com>
7930 * linux-nat.c (lin_lwp_attach_lwp): No longer special case the
7931 main LWP. Handle the case of waitpid returning 0 if we're already
7932 attached to the LWP. Don't set the LWP's last_resume_kind to
7933 resume_stop if we already knew about the LWP.
7934 (linux_nat_filter_event): Add debug logs.
7936 2015-02-20 Pedro Alves <palves@redhat.com>
7938 * target.h (forward_target_decr_pc_after_break): Delete
7941 2015-02-20 Pedro Alves <palves@redhat.com>
7944 * linux-thread-db.c (thread_get_info_callback): Return early if
7945 the thread's lwp id is -1.
7947 2015-02-20 Joel Brobecker <brobecker@adacore.com>
7951 2015-02-19 Steve Ellcey <sellcey@imgtec.com>
7953 * dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr.
7954 (dtrace_get_probes) Change type of variable 'dof'.
7956 2015-02-19 Antoine Tremblay <antoine.tremblay@ericsson.com>
7958 PR breakpoints/16812
7959 * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
7960 * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
7961 * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
7963 2015-02-19 David Taylor <dtaylor@emc.com>
7965 * common/ax.def (setv): Fix consumed entry in setv DEFOP.
7967 2015-02-18 Patrick Palka <patrick@parcs.ath.cx>
7969 * tui/tui-io.c (tui_handle_resize_during_io): Remove this
7971 (tui_putc): Don't call tui_handle_resize_during_io.
7972 (tui_getc): Likewise.
7973 (tui_mld_getc): Likewise.
7974 * tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
7975 (tui_sigwinch_token): New static variable.
7976 (tui_initialize_win): Adjust documentation. Set
7978 (tui_async_resize_screen): New asynchronous callback.
7979 (tui_sigwinch_handler): Adjust documentation. Asynchronously
7980 invoke tui_async_resize_screen.
7982 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
7984 * configure: Regenerated.
7985 * configure.ac: Use GDB_AC_TRANSFORM.
7986 * Makefile.in (aclocal_m4_deps): Added transform.m4.
7987 * acinclude.m4: sinclude transform.m4.
7988 * transform.m4: New file.
7989 (GDB_AC_TRANSFORM): New macro.
7991 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
7993 * NEWS: Announce the support for DTrace SDT probes.
7995 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
7997 * amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
7998 (amd64_dtrace_parse_probe_argument): New function.
7999 (amd64_dtrace_probe_is_enabled): Likewise.
8000 (amd64_dtrace_enable_probe): Likewise.
8001 (amd64_dtrace_disable_probe): Likewise.
8002 (amd64_linux_init_abi): Register the
8003 `gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
8004 `gdbarch_dtrace_disable_probe' and
8005 `gdbarch_dtrace_probe_is_enabled' hooks.
8006 (amd64_dtrace_disabled_probe_sequence_1): New constant.
8007 (amd64_dtrace_disabled_probe_sequence_2): Likewise.
8008 (amd64_dtrace_enable_probe_sequence): Likewise.
8009 (amd64_dtrace_disable_probe_sequence): Likewise.
8011 2015-01-17 Jose E. Marchesi <jose.marchesi@oracle.com>
8013 * breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
8014 the -probe-dtrace new vpossible value for PROBE_MODIFIER.
8015 * configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
8017 * Makefile.in (SFILES): dtrace-probe.c added.
8018 * configure: Regenerate.
8019 * dtrace-probe.c: New file.
8020 (SHT_SUNW_dof): New constant.
8021 (dtrace_probe_type): New enum.
8022 (dtrace_probe_arg): New struct.
8023 (dtrace_probe_arg_s): New typedef.
8024 (struct dtrace_probe_enabler): New struct.
8025 (dtrace_probe_enabler_s): New typedef.
8026 (dtrace_probe): New struct.
8027 (dtrace_probe_is_linespec): New function.
8028 (dtrace_dof_sect_type): New enum.
8029 (dtrace_dof_dofh_ident): Likewise.
8030 (dtrace_dof_encoding): Likewise.
8031 (DTRACE_DOF_ENCODE_LSB): Likewise.
8032 (DTRACE_DOF_ENCODE_MSB): Likewise.
8033 (dtrace_dof_hdr): New struct.
8034 (dtrace_dof_sect): Likewise.
8035 (dtrace_dof_provider): Likewise.
8036 (dtrace_dof_probe): Likewise.
8037 (DOF_UINT): New macro.
8038 (DTRACE_DOF_PTR): Likewise.
8039 (DTRACE_DOF_SECT): Likewise.
8040 (dtrace_process_dof_probe): New function.
8041 (dtrace_process_dof): Likewise.
8042 (dtrace_build_arg_exprs): Likewise.
8043 (dtrace_get_arg): Likewise.
8044 (dtrace_get_probes): Likewise.
8045 (dtrace_get_probe_argument_count): Likewise.
8046 (dtrace_can_evaluate_probe_arguments): Likewise.
8047 (dtrace_evaluate_probe_argument): Likewise.
8048 (dtrace_compile_to_ax): Likewise.
8049 (dtrace_probe_destroy): Likewise.
8050 (dtrace_gen_info_probes_table_header): Likewise.
8051 (dtrace_gen_info_probes_table_values): Likewise.
8052 (dtrace_probe_is_enabled): Likewise.
8053 (dtrace_probe_ops): New variable.
8054 (info_probes_dtrace_command): New function.
8055 (_initialize_dtrace_probe): Likewise.
8056 (dtrace_type_name): Likewise.
8058 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
8060 * gdbarch.sh (dtrace_parse_probe_argument): New.
8061 (dtrace_probe_is_enabled): Likewise.
8062 (dtrace_enable_probe): Likewise.
8063 (dtrace_disable_probe): Likewise.
8064 * gdbarch.c: Regenerate.
8065 * gdbarch.h: Regenerate.
8067 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
8069 * stap-probe.c (stap_probe_ops): Add NULLs in the static
8070 stap_probe_ops for `enable_probe' and `disable_probe'.
8071 * probe.c (enable_probes_command): New function.
8072 (disable_probes_command): Likewise.
8073 (_initialize_probe): Define the cli commands `enable probe' and
8075 (parse_probe_linespec): New function.
8076 (info_probes_for_ops): Use parse_probe_linespec.
8077 * probe.h (probe_ops): New hooks `enable_probe' and
8080 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
8082 * probe.c (compute_probe_arg): Moved from stap-probe.c
8083 (compile_probe_arg): Likewise.
8084 (probe_funcs): Likewise.
8085 * stap-probe.c (compute_probe_arg): Moved to probe.c.
8086 (compile_probe_arg): Likewise.
8087 (probe_funcs): Likewise.
8089 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
8091 * probe.c (print_ui_out_not_applicables): New function.
8092 (exists_probe_with_pops): Likewise.
8093 (info_probes_for_ops): Do not include column headers for probe
8094 types for which no probe has been actually found on any object.
8095 Also invoke `print_ui_out_not_applicables' in order to match the
8096 column rows with the header when probes of several types are
8098 Print the "Type" column.
8099 * probe.h (probe_ops): Added a new probe operation `type_name'.
8100 * stap-probe.c (stap_probe_ops): Add `stap_type_name'.
8101 (stap_type_name): New function.
8103 2015-02-17 Patrick Palka <patrick@parcs.ath.cx>
8105 * tui/tui-io.c (tui_getc): Don't call key_is_command_char.
8106 (key_is_command_char): Delete.
8108 2015-02-17 Pedro Alves <palves@redhat.com>
8110 * tui/tui.c (tui_enable): Resize windows before anything
8111 might show a window.
8113 2015-02-17 Max Ostapenko <m.ostapenko@partner.samsung.com>
8116 * aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
8117 (aarch64_linux_read_description): Remove initialize_tdesc_aarch64
8119 * aarch64-tdep.h (tdesc_aarch64): Declare.
8121 2015-02-12 Mark Wielaard <mjw@redhat.com>
8123 * contrib/ari/gdb_ari.sh: Remove checks for "true" and "false".
8125 2015-02-13 Doug Evans <dje@google.com>
8127 * cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
8128 anonymous_namespace to is_in_anonymous for consistency with the rest
8130 (cp_lookup_bare_symbol): Fix typo in comment.
8131 (cp_search_static_and_baseclasses): Ditto.
8132 (search_symbol_list): Use vertical space in comment better.
8133 (reset_directive_searched): Ditto. Fix typo.
8134 (cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.
8136 2015-02-13 Yao Qi <yao.qi@arm.com>
8138 * MAINTAINERS: Update my email address.
8140 2015-02-12 Doug Evans <dje@google.com>
8142 * symtab.c (completion_list_add_name): Fix memory leak.
8144 2015-02-12 Doug Evans <dje@google.com>
8146 * completer.c (complete_line): Remove incorrect comment.
8148 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8150 * python/py-framefilter.c (py_print_single_arg, enumerate_locals)
8151 (py_print_frame): Use RETURN_MASK_ERROR.
8153 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8155 * python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
8156 function comment. Wrap all function that can throw in cleanups.
8157 (gdbpy_apply_frame_filter): Wrap all function that can throw in
8160 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8162 * python/py-framefilter.c (py_print_frame): Substitute goto error.
8163 Remove the error label.
8165 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8167 * python/py-framefilter.c (py_print_frame): Put conditional code paths
8168 with goto first, indent the former else codepath left. Put variable
8169 'elided' to a new inner block.
8171 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8173 * python/py-framefilter.c (py_print_frame): Whitespacing fixes.
8175 2015-02-11 Pedro Alves <palves@redhat.com>
8177 * xcoffread.c (within_function): Delete.
8179 2015-02-11 Tom Tromey <tromey@redhat.com>
8180 Pedro Alves <palves@redhat.com>
8182 * breakpoint.c (base_breakpoint_ops): Delete.
8183 * dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
8184 * elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
8185 * guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
8186 * ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
8187 * python/py-arch.c (arch_object_type): Make extern.
8188 * python/py-block.c (block_syms_iterator_object_type): Make extern.
8189 * python/py-bpevent.c (breakpoint_event_object_type): Make extern.
8190 * python/py-cmd.c (cmdpy_object_type): Make extern.
8191 * python/py-continueevent.c (continue_event_object_type)
8192 * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
8193 parameter. Update all callers.
8194 * python/py-evtregistry.c (eventregistry_object_type): Make extern.
8195 * python/py-exitedevent.c (exited_event_object_type): Make extern.
8196 * python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
8197 * python/py-function.c (fnpy_object_type): Make extern.
8198 * python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
8199 * python/py-infevents.c (call_pre_event_object_type)
8200 (inferior_call_post_event_object_type).
8201 (memory_changed_event_object_type): Make extern.
8202 * python/py-infthread.c (thread_object_type): Make extern.
8203 * python/py-lazy-string.c (lazy_string_object_type): Make extern.
8204 * python/py-linetable.c (linetable_entry_object_type)
8205 (linetable_object_type, ltpy_iterator_object_type): Make extern.
8206 * python/py-newobjfileevent.c (new_objfile_event_object_type)
8207 (clear_objfiles_event_object_type): Make extern.
8208 * python/py-objfile.c (objfile_object_type): Make extern.
8209 * python/py-param.c (parmpy_object_type): Make extern.
8210 * python/py-progspace.c (pspace_object_type): Make extern.
8211 * python/py-signalevent.c (signal_event_object_type): Make extern.
8212 * python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
8213 * python/py-type.c (type_object_type, field_object_type)
8214 (type_iterator_object_type): Make extern.
8215 * python/python.c (python_extension_script_ops)
8216 (python_extension_ops): Make extern.
8217 * stap-probe.c (stap_probe_ops): Make extern.
8219 2015-02-11 Pedro Alves <pedro@codesourcery.com>
8221 * infrun.c (adjust_pc_after_break): Don't adjust the PC just
8222 because the event thread is not the current thread.
8224 2015-02-11 Doug Evans <xdje42@gmail.com>
8226 * gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't
8227 been initialized yet, return NULL.
8229 2015-02-11 Doug Evans <dje@google.com>
8231 * symfile.h (new_symfile_objfile): Delete.
8232 * symfile.c (finish_new_objfile): Renamed from new_symfile_objfile.
8233 All callers updated.
8235 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
8237 * tui/tui-io.c (tui_handle_resize_during_io): Call
8238 tui_update_gdb_sizes() after resizing the screen.
8239 * tui/tui.c (tui_enable): Resize the terminal before
8240 calling tui_update_gdb_sizes().
8242 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
8244 * tui/tui-io.c (tui_getc): Move cursor to the end of the command
8245 line before printing a newline.
8247 2015-02-11 Mark Wielaard <mjw@redhat.com>
8249 * utils.c (producer_is_gcc): Return true or false.
8251 2015-02-10 Mark Wielaard <mjw@redhat.com>
8253 * utils.h (producer_is_gcc): Change return type to bool. Add major
8255 * utils.c (producer_is_gcc): Likewise.
8256 (producer_is_gcc_ge_4): Adjust producer_is_gcc call.
8257 * dwarf2read.c (check_producer): Likewise.
8259 2015-02-10 Pedro Alves <palves@redhat.com>
8261 * infrun.c (displaced_step_fixup): Switch to the event thread
8262 before calling gdbarch_displaced_step_fixup.
8264 2015-02-10 Antoine Tremblay <antoine.tremblay@ericsson.com>
8266 * MAINTAINERS (Write After Approval): Add Antoine Tremblay.
8268 2015-02-10 Simon Marchi <simon.marchi@ericsson.com>
8270 * ada-varobj.c (ada_name_of_child): Constify parent.
8271 (ada_path_expr_of_child): Same.
8272 (ada_value_of_child): Same.
8273 (ada_type_of_child): Same.
8274 * c-varobj.c (c_is_path_expr_parent): Same.
8275 (c_describe_child): Same.
8276 (c_name_of_child): Same.
8277 (c_value_of_child): Same.
8278 (c_type_of_child): Same.
8279 (cplus_number_of_children): Same.
8280 (cplus_describe_child): Constify var.
8281 (cplus_name_of_child): Constify parent.
8282 (cplus_value_of_child): Same.
8283 (cplus_type_of_child): Same.
8284 * jv-varobj.c (java_name_of_child): Same.
8285 (java_value_of_child): Same.
8286 (java_type_of_child): Same.
8287 * varobj.c (value_of_child): Same.
8288 (varobj_default_is_path_expr_parent): Constify var, parent and return
8290 (varobj_get_path_expr): Constify var, modify path_expr through
8292 (install_new_value): Constify parent.
8293 (value_of_child): Constify parent.
8294 * varobj.h (struct varobj): Constify parent.
8295 (struct lang_varobj_ops): Constify name_of_child, value_of_child and
8297 (varobj_get_path_expr): Constify var.
8298 (varobj_get_path_expr_parent): Constify var and return value.
8300 2015-02-10 Luis Machado <lgustavo@codesourcery.com>
8302 * arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
8303 (arm_prologue_this_id): Move PC and SP limit checks to
8304 arm_prologue_unwind_stop_reason.
8305 (arm_prologue_unwind) <stop_reason> : Set to
8306 arm_prologue_unwind_stop_reason.
8308 2015-02-09 Mark Wielaard <mjw@redhat.com>
8310 * dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
8311 DW_LANG_Fortran08 as language_fortran.
8313 2015-02-09 Sergio Durigan Junior <sergiodj@redhat.com>
8316 * gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
8317 of pointer against char.
8319 2015-02-09 Mark Wielaard <mjw@redhat.com>
8321 * c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'.
8322 (c_type_print_modifier): Likewise.
8323 * dwarf2read.c (read_tag_atomic_type): New function.
8324 (read_type_die_1): Handle DW_TAG_atomic_type.
8325 * gdbtypes.c (make_atomic_type): New function.
8326 (recursive_dump_type): Handle TYPE_ATOMIC.
8327 * gdbtypes.h (enum type_flag_values): Renumber.
8328 (enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC.
8329 (TYPE_ATOMIC): New macro.
8330 (make_atomic_type): Declare.
8332 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8334 * btrace.c (ftrace_find_call): Skip gaps.
8335 (ftrace_new_function): Initialize level.
8336 (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
8337 (ftrace_new_switch): Update
8339 (ftrace_new_gap): New.
8340 (ftrace_update_function): Create new function after gap.
8341 (btrace_compute_ftrace_bts): Create gap on error.
8342 (btrace_stitch_bts): Update parameters. Clear trace if it
8344 (btrace_stitch_trace): Update parameters. Update callers.
8345 (btrace_clear): Reset the number of gaps.
8346 (btrace_insn_get): Return NULL if the iterator points to a gap.
8347 (btrace_insn_number): Return zero if the iterator points to a gap.
8348 (btrace_insn_end): Allow gaps at the end.
8349 (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
8350 (btrace_find_insn_by_number): Assert that the found iterator does
8352 (btrace_call_next, btrace_call_prev): Assert that the last function
8354 * btrace.h (btrace_bts_error): New.
8355 (btrace_function): Update comment.
8356 (btrace_function) <insn, insn_offset, number>: Update comment.
8357 (btrace_function) <errcode>: New.
8358 (btrace_thread_info) <ngaps>: New.
8359 (btrace_thread_info) <replay>: Update comment.
8360 (btrace_insn_get): Update comment.
8361 * record-btrace.c (btrace_ui_out_decode_error): New.
8362 (record_btrace_info): Print number of gaps.
8363 (btrace_insn_history, btrace_call_history): Call
8364 btrace_ui_out_decode_error for gaps.
8365 (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
8367 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8369 * common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
8370 * nat/linux-btrace.c: (btrace_this_cpu): New.
8371 (cpu_supports_bts): Call btrace_this_cpu.
8372 (intel_supports_bts): Add cpu parameter.
8374 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8376 * btrace.h (btrace_insn_class): New.
8377 (btrace_insn) <size, iclass>: New.
8378 * btrace.c (ftrace_find_call): Update parameters. Update users.
8379 Use instruction classification.
8380 (ftrace_new_return): Update parameters. Update users.
8381 (ftrace_update_function): Update parameters. Update users. Use
8382 instruction classification.
8383 (ftrace_update_insns): Update parameters. Update users.
8384 (ftrace_classify_insn): New.
8385 (btrace_compute_ftrace_bts): Fill in new btrace_insn fields. Add
8386 TRY_CATCH around call to gdb_insn_length.
8388 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8390 * btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
8391 Update parameters. Update users.
8393 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8395 * btrace.c (parse_xml_btrace_conf_bts): Add size.
8396 (btrace_conf_bts_attributes): New.
8397 (btrace_conf_children): Add attributes.
8398 * common/btrace-common.h (btrace_config_bts): New.
8399 (btrace_config)<bts>: New.
8400 (btrace_config): Update comment.
8401 * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
8403 * features/btrace-conf.dtd: Increment version. Add size
8404 attribute to bts element.
8405 * record-btrace.c (set_record_btrace_bts_cmdlist,
8406 show_record_btrace_bts_cmdlist): New.
8407 (record_btrace_adjust_size, record_btrace_print_bts_conf,
8408 record_btrace_print_conf, cmd_set_record_btrace_bts,
8409 cmd_show_record_btrace_bts): New.
8410 (record_btrace_info): Call record_btrace_print_conf.
8411 (_initialize_record_btrace): Add commands.
8412 * remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
8413 (remote_protocol_features): Add Qbtrace-conf:bts:size packet.
8414 (btrace_sync_conf): Synchronize bts size.
8415 (_initialize_remote): Add Qbtrace-conf:bts:size packet.
8416 * NEWS: Announce new commands and new packets.
8418 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8420 * Makefile.in (XMLFILES): Add btrace-conf.dtd.
8421 * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
8422 (x86_linux_btrace_conf): New.
8423 (x86_linux_create_target): Initialize to_btrace_conf.
8424 * nat/linux-btrace.c (linux_enable_btrace): Update parameters.
8425 Check format. Split into this and ...
8426 (linux_enable_bts): ... this.
8427 (linux_btrace_conf): New.
8428 (perf_event_skip_record): Renamed into ...
8429 (perf_event_skip_bts_record): ... this. Updated users.
8430 (linux_disable_btrace): Split into this and ...
8431 (linux_disable_bts): ... this.
8432 (linux_read_btrace): Check format.
8433 * nat/linux-btrace.h (linux_enable_btrace): Update parameters.
8434 (linux_btrace_conf): New.
8435 (btrace_target_info)<ptid>: Moved.
8436 (btrace_target_info)<conf>: New.
8437 (btrace_target_info): Split into this and ...
8438 (btrace_tinfo_bts): ... this. Updated users.
8439 * btrace.c (btrace_enable): Update parameters.
8440 (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
8441 (btrace_conf_children, btrace_conf_attributes)
8442 (btrace_conf_elements): New.
8443 * btrace.h (btrace_enable): Update parameters.
8444 (btrace_conf, parse_xml_btrace_conf): New.
8445 * common/btrace-common.h (btrace_config): New.
8446 * feature/btrace-conf.dtd: New.
8447 * record-btrace.c (record_btrace_conf): New.
8448 (record_btrace_cmdlist): New.
8449 (record_btrace_enable_warn, record_btrace_open): Pass
8450 &record_btrace_conf.
8451 (record_btrace_info): Print recording format.
8452 (cmd_record_btrace_bts_start): New.
8453 (cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
8454 (_initialize_record_btrace): Add "record btrace bts" subcommand.
8455 Add "record bts" alias command.
8456 * remote.c (remote_state)<btrace_config>: New.
8457 (remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
8458 (remote_protocol_features): Add qXfer:btrace-conf:read.
8459 (remote_open_1): Call remote_btrace_reset.
8460 (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
8461 (btrace_target_info)<conf>: New.
8462 (btrace_sync_conf, btrace_read_config): New.
8463 (remote_enable_btrace): Update parameters. Call btrace_sync_conf and
8465 (remote_btrace_conf): New.
8466 (init_remote_ops): Initialize to_btrace_conf.
8467 (_initialize_remote): Add qXfer:btrace-conf packet.
8468 * target.c (target_enable_btrace): Update parameters.
8469 (target_btrace_conf): New.
8470 * target.h (target_enable_btrace): Update parameters.
8471 (target_btrace_conf): New.
8472 (target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
8473 (target_ops)<to_enable_btrace>: Update parameters and comment.
8474 (target_ops)<to_btrace_conf>: New.
8475 * target-delegates: Regenerate.
8476 * target-debug.h (target_debug_print_const_struct_btrace_config_p)
8477 (target_debug_print_const_struct_btrace_target_info_p): New.
8478 * NEWS: Announce new command and new packet.
8480 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8482 * nat/linux-btrace.h (perf_event_buffer): New.
8483 (btrace_target_info) <buffer, size, data_head>: Replace with ...
8485 * nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
8486 (perf_event_buffer_size, perf_event_buffer_begin)
8487 (perf_event_buffer_end, linux_btrace_has_changed): Removed.
8489 (perf_event_new_data): New.
8491 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8493 * btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
8494 * record-btrace.c (record_btrace_open): Remove call to
8495 target_supports_btrace.
8496 * remote.c (remote_supports_btrace): Update parameters.
8497 * target.c (target_supports_btrace): Update parameters.
8498 * target.h (to_supports_btrace, target_supports_btrace): Update
8500 * target-delegates.c: Regenerate.
8501 * target-debug.h (target_debug_print_enum_btrace_format): New.
8502 * nat/linux-btrace.c
8503 (kernel_supports_btrace): Rename into ...
8504 (kernel_supports_bts): ... this. Update users. Update warning text.
8505 (intel_supports_btrace): Rename into ...
8506 (intel_supports_bts): ... this. Update users.
8507 (cpu_supports_btrace): Rename into ...
8508 (cpu_supports_bts): ... this. Update users.
8509 (linux_supports_btrace): Update parameters. Split into this and ...
8510 (linux_supports_bts): ... this.
8511 * nat/linux-btrace.h (linux_supports_btrace): Update parameters.
8513 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8515 * Makefile.in (SFILES): Add common/btrace-common.c.
8516 (COMMON_OBS): Add common/btrace-common.o.
8517 (btrace-common.o): Add build rules.
8518 * btrace.c (parse_xml_btrace): Update parameters.
8519 (parse_xml_btrace_block): Set format field.
8520 (btrace_add_pc, btrace_fetch): Use struct btrace_data.
8521 (do_btrace_data_cleanup, make_cleanup_btrace_data): New.
8522 (btrace_compute_ftrace): Split into this and...
8523 (btrace_compute_ftrace_bts): ...this.
8524 (btrace_stitch_trace): Split into this and...
8525 (btrace_stitch_bts): ...this.
8526 * btrace.h (parse_xml_btrace): Update parameters.
8527 (make_cleanup_btrace_data): New.
8528 * common/btrace-common.c: New.
8529 * common/btrace-common.h: Include common-defs.h.
8530 (btrace_block_s): Update comment.
8531 (btrace_format): New.
8532 (btrace_format_string): New.
8533 (btrace_data_bts): New.
8535 (btrace_data_init, btrace_data_fini, btrace_data_empty): New.
8536 * remote.c (remote_read_btrace): Update parameters.
8537 * target.c (target_read_btrace): Update parameters.
8538 * target.h (target_read_btrace): Update parameters.
8539 (target_ops)<to_read_btrace>: Update parameters.
8540 * x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
8541 * target-delegates.c: Regenerate.
8542 * target-debug (target_debug_print_struct_btrace_data_p): New.
8543 * nat/linux-btrace.c (linux_read_btrace): Split into this and...
8544 (linux_read_bts): ...this.
8545 * nat/linux-btrace.h (linux_read_btrace): Update parameters.
8547 2015-02-06 Doug Evans <dje@google.com>
8549 * remote-m32r-sdi.c: Include symfile.h.
8551 2015-02-06 Doug Evans <dje@google.com>
8553 * symtab.h (clear_symtab_users, deduce_language_from_filename): Move
8554 * symfile.h (clear_symtab_users, deduce_language_from_filename): ...
8557 2015-02-06 Pedro Alves <palves@redhat.com>
8559 * linux-thread-db.c (find_new_threads_callback): Add debug output.
8561 2015-02-06 Simon Marchi <simon.marchi@ericsson.com>
8564 * breakpoint.c (map_breakpoint_numbers): Check for empty args string.
8565 (enable_count_command): Check args for NULL value.
8567 2015-02-05 Doug Evans <xdje42@gmail.com>
8569 * guile/scm-frame.c: Fix spelling errors in a comment.
8571 2015-02-04 Jan Kratochvil <jan.kratochvil@redhat.com>
8573 * python/python-internal.h (Py_hash_t): Define it for Python <3.2.
8574 * python/py-value.c (valpy_fetch_lazy): Use it. Remove cast to the
8577 2015-02-04 Pedro Alves <palves@redhat.com>
8579 * linux-nat.c (handle_extended_wait): Don't resume LWPs here.
8580 (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
8582 (resume_stopped_resumed_lwps): Don't check whether the thread is
8583 marked as executing.
8584 (linux_nat_wait_1): Use resume_stopped_resumed_lwps.
8586 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
8588 * regset.h (struct regset): Add flags field.
8589 (REGSET_VARIABLE_SIZE): New value for a regset's flags field.
8590 * corelow.c (get_core_register_section): Add warning if the size
8591 exceeds the requested size and the regset does not have the
8592 REGSET_VARIABLE_SIZE flag set.
8593 * alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
8595 * armbsd-tdep.c (armbsd_gregset): Likewise.
8596 * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
8597 * hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
8598 * m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
8599 * mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.
8601 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
8603 * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
8604 For ".reg-xstate", explicitly specify the requested section size
8605 via X86_XSTATE_SIZE instead of just 0 on input and
8606 X86_XSTATE_MAX_SIZE on output.
8607 * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
8610 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
8613 * gdbarch.sh (iterate_over_regset_sections_cb): Document this
8614 function type, particularly its SIZE parameter.
8615 * gdbarch.h: Regenerate.
8616 * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
8617 actual against required size using ">=" instead of "==".
8618 (amd64_collect_fpregset): Likewise.
8619 * i386-tdep.c (i386_supply_gregset): Likewise.
8620 (i386_collect_gregset): Likewise.
8621 (i386_supply_fpregset): Likewise.
8622 (i386_collect_fpregset): Likewise.
8623 * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
8624 (mips_fill_gregset_wrapper): Likewise.
8625 (mips_supply_fpregset_wrapper): Likewise.
8626 (mips_fill_fpregset_wrapper): Likewise.
8627 (mips64_supply_gregset_wrapper): Likewise.
8628 (mips64_fill_gregset_wrapper): Likewise.
8629 (mips64_supply_fpregset_wrapper): Likewise.
8630 (mips64_fill_fpregset_wrapper): Likewise.
8631 * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
8632 (am33_supply_fpregset_method): Likewise.
8633 (am33_collect_gregset_method): Likewise.
8634 (am33_collect_fpregset_method): Likewise.
8636 2015-02-04 Doug Evans <dje@google.com>
8637 Pedro Alves <palves@redhat.com>
8638 Eli Zaretskii <eliz@gnu.org>
8641 * tui/tui-command.c (tui_refresh_cmd_win): New function.
8642 * tui/tui-command.c (tui_refresh_cmd_win): Declare.
8643 * tui/tui-file.c: #include tui/tui-command.h.
8644 (tui_file_fputs): Refresh command window if stream is not gdb_stdout.
8645 (tui_file_flush): Refresh command window if stream is gdb_stdout.
8646 * tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.
8648 2015-02-04 Pedro Alves <palves@redhat.com>
8651 * event-loop.c (gdb_do_one_event): Add default switch case.
8653 2015-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
8655 Filter out inferior gcc option -fpreprocessed.
8656 * compile/compile.c (filter_args): New function.
8659 2015-02-03 Pedro Alves <palves@redhat.com>
8661 * event-loop.c: Don't declare nor define a queue type for
8663 (event_queue): Delete.
8664 (create_event, create_file_event, gdb_event_xfree)
8665 (initialize_event_loop, process_event): Delete.
8666 (gdb_do_one_event): Return as soon as one event is handled.
8667 (handle_file_event): Change prototype. Used the passed in
8668 file_handler pointer and ready_mask instead of looping over all
8670 (gdb_wait_for_event): Update the poll/select timeouts before
8671 blocking. Run event handlers directly instead of queueing events.
8672 Return as soon as one event is handled.
8673 (struct async_event_handler_data): Delete.
8674 (invoke_async_event_handler): Delete.
8675 (check_async_event_handlers): Change return type to int. Run
8676 event handlers directly instead of queueing events. Return as
8677 soon as one event is handled.
8678 (handle_timer_event): Delete.
8679 (update_wait_timeout): New function, factored out from
8681 (poll_timers): Reimplement.
8682 * event-loop.h (initialize_event_loop): Delete declaration.
8683 * top.c (gdb_init): Don't call initialize_event_loop.
8685 2015-02-03 Pedro Alves <palves@redhat.com>
8687 * event-loop.c (clear_async_event_handler): New function.
8688 * event-loop.h (clear_async_event_handler): New declaration.
8689 * record-btrace.c (record_btrace_async): New function.
8690 (init_record_btrace_ops): Install record_btrace_async.
8691 * record-full.c (record_full_async): New function.
8692 (record_full_resume): Don't mark the async event source here.
8693 (init_record_full_ops): Install record_full_async.
8694 (record_full_core_resume): Don't mark the async event source here.
8695 (init_record_full_core_ops): Install record_full_async.
8696 * remote.c (remote_async): Mark and clear the async stop reply
8697 queue event-loop token as appropriate.
8699 2015-02-03 Pedro Alves <palves@redhat.com>
8701 * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
8702 target_is_async_p instead of target_can_async.
8703 (linux_nat_wait): Use target_is_async_p instead of
8704 target_can_async. Don't enable async here.
8705 * remote.c (interrupt_query, remote_wait, putpkt_binary): Use
8706 target_is_async_p instead of target_can_async.
8708 2015-02-02 Simon Marchi <simon.marchi@ericsson.com>
8710 * varobj.h (lang_varobj_ops): Mention which return values need
8713 2015-02-02 Joel Brobecker <brobecker@adacore.com>
8715 * dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker.
8717 2015-02-02 Joel Brobecker <brobecker@adacore.com>
8720 * ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
8721 results found in the cache.
8723 2015-02-02 Joel Brobecker <brobecker@adacore.com>
8726 * ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
8727 when allocating a new one.
8729 2015-02-01 Tom Tromey <tom@tromey.com>
8731 * MAINTAINERS: Remove myself.
8733 2015-01-31 Doug Evans <xdje42@gmail.com>
8735 * dwarf2read.c (process_structure_scope): Update setting of
8736 TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
8737 * gdbtypes.c (internal_type_vptr_fieldno): New function.
8738 (set_type_vptr_fieldno): New function.
8739 (internal_type_vptr_basetype): New function.
8740 (set_type_vptr_basetype): New function.
8741 (get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
8743 (allocate_cplus_struct_type): Initialize vptr_fieldno.
8744 (recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
8745 (print_cplus_stuff): ... moved here.
8746 (copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
8747 * gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
8749 (struct cplus_struct_type): ... here. All uses updated.
8750 (TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
8751 (internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
8752 (internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
8753 * stabsread.c (read_tilde_fields): Update setting of
8754 TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
8756 2015-01-31 Doug Evans <xdje42@gmail.com>
8758 * cp-valprint.c (cp_find_class_member): Rename parameter domain_p
8760 (cp_print_class_member): Rename local domain to self_type.
8761 * dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
8762 domain_type to self_type.
8763 (set_die_type) <need_gnat_info>: Handle
8764 TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
8765 * gdb-gdb.py (StructMainTypePrettyPrinter): Handle
8766 TYPE_SPECIFIC_SELF_TYPE.
8767 * gdbtypes.c (internal_type_self_type): New function.
8768 (set_type_self_type): New function.
8769 (smash_to_memberptr_type): Rename parameter domain to self_type.
8770 Update setting of TYPE_SELF_TYPE.
8771 (smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
8772 (smash_to_method_type): Rename parameter domain to self_type.
8773 Update setting of TYPE_SELF_TYPE.
8774 (check_stub_method): Call smash_to_method_type.
8775 (recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
8776 (copy_type_recursive): Ditto.
8777 * gdbtypes.h (enum type_specific_kind): New value
8778 TYPE_SPECIFIC_SELF_TYPE.
8779 (struct main_type) <type_specific>: New member self_type.
8780 (struct cplus_struct_type) <fn_field.type>: Update comment.
8781 (TYPE_SELF_TYPE): Rewrite.
8782 (internal_type_self_type, set_type_self_type): Declare.
8783 * gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
8785 (gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
8786 * m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
8788 * stabsread.c (read_member_functions): Mark methods with
8789 TYPE_CODE_METHOD, not TYPE_CODE_FUNC. Update setting of
8792 2015-01-31 Doug Evans <xdje42@gmail.com>
8794 * gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE.
8797 2015-01-31 Doug Evans <xdje42@gmail.com>
8799 * gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
8800 or unions. Return zero if union.
8801 (gnuv3_get_vtable): Call check_typedef. Assert only passed structs.
8802 (gnuv3_rtti_type): Pass already-check_typedef'd value to
8804 (compute_vtable_size): Assert only passed structs.
8805 (gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.
8807 2015-01-31 Doug Evans <xdje42@gmail.com>
8809 * gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD
8812 2015-01-31 Gary Benson <gbenson@redhat.com>
8813 Doug Evans <dje@google.com>
8818 * cli/cli-cmds.c (complete_command): Notify user if max-completions
8820 * common/common-exceptions.h (enum errors)
8821 <MAX_COMPLETIONS_REACHED_ERROR>: New value.
8822 * completer.h (get_max_completions_reached_message): New declaration.
8823 (max_completions): Likewise.
8824 (completion_tracker_t): New typedef.
8825 (new_completion_tracker): New declaration.
8826 (make_cleanup_free_completion_tracker): Likewise.
8827 (maybe_add_completion_enum): New enum.
8828 (maybe_add_completion): New declaration.
8829 (throw_max_completions_reached_error): Likewise.
8830 * completer.c (max_completions): New global variable.
8831 (new_completion_tracker): New function.
8832 (free_completion_tracker): Likewise.
8833 (make_cleanup_free_completion_tracker): Likewise.
8834 (maybe_add_completions): Likewise.
8835 (throw_max_completions_reached_error): Likewise.
8836 (complete_line): Remove duplicates and limit result to max_completions
8838 (get_max_completions_reached_message): New function.
8839 (gdb_display_match_list): Handle max_completions.
8840 (_initialize_completer): New declaration and function.
8841 * symtab.c: Include completer.h.
8842 (completion_tracker): New static variable.
8843 (completion_list_add_name): Call maybe_add_completion.
8844 (default_make_symbol_completion_list_break_on_1): Renamed from
8845 default_make_symbol_completion_list_break_on. Maintain
8846 completion_tracker across calls to completion_list_add_name.
8847 (default_make_symbol_completion_list_break_on): New function.
8848 * top.c (init_main): Set rl_completion_display_matches_hook.
8849 * tui/tui-io.c: Include completer.h.
8850 (tui_old_rl_display_matches_hook): New static global.
8851 (tui_rl_display_match_list): Notify user if max-completions reached.
8852 (tui_setup_io): Save/restore rl_completion_display_matches_hook.
8853 * NEWS (New Options): Mention set/show max-completions.
8855 2015-01-31 Gary Benson <gbenson@redhat.com>
8857 * symtab.c (struct add_name_data) <code>: New field.
8859 (add_symtab_completions): New function.
8860 (symtab_expansion_callback): Likewise.
8861 (default_make_symbol_completion_list_break_on): Set datum.code.
8862 Move minimal symbol scan before calling expand_symtabs_matching.
8863 Scan known primary symtabs for externs and statics before calling
8864 expand_symtabs_matching. Pass symtab_expansion_callback as
8865 expansion_notify argument to expand_symtabs_matching. Do not scan
8866 primary symtabs for externs and statics after calling
8867 expand_symtabs_matching.
8869 2015-01-31 Gary Benson <gbenson@redhat.com>
8871 * symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
8872 (struct quick_symbol_functions) <expand_symtabs_matching>:
8873 New argument expansion_notify. All uses updated.
8874 (expand_symtabs_matching): New argument expansion_notify.
8876 * symfile-debug.c (debug_qf_expand_symtabs_matching):
8877 Also print expansion notify.
8878 * symtab.c (expand_symtabs_matching_via_partial): Call
8879 expansion_notify whenever a partial symbol table is expanded.
8880 * dwarf2read.c (dw2_expand_symtabs_matching): Call
8881 expansion_notify whenever a symbol table is instantiated.
8883 2015-01-31 Doug Evans <xdje42@gmail.com>
8885 * cli-out.c: #include completer.h, readline/readline.h.
8886 (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
8887 (cli_mld_flush, cld_mld_erase_entire_line): Ditto.
8888 (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
8889 * cli-out.h (cli_display_match_list): Declare.
8890 * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
8891 (ELLIPSIS_LEN): Ditto.
8892 (gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
8893 (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
8894 (gdb_fnprint, gdb_print_filename): Ditto.
8895 (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
8896 (gdb_display_match_list): Ditto.
8897 * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
8898 (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
8899 (mld_beep_ftype, mld_read_key_ftype): Ditto.
8900 (match_list_displayer): New struct.
8901 (gdb_display_match_list): Declare.
8902 * top.c (init_main): Set rl_completion_display_matches_hook.
8903 * tui/tui-io.c: #include completer.h.
8904 (printable_part, PUTX, print_filename, get_y_or_n): Delete.
8905 (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
8906 (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
8907 (tui_mld_getc, tui_mld_read_key): Ditto.
8908 (tui_rl_display_match_list): Rewrite.
8909 (tui_handle_resize_during_io): New arg for_completion. All callers
8912 2015-01-31 Doug Evans <xdje42@gmail.com>
8914 Add symbol lookup cache.
8915 * NEWS: Document new options and commands.
8916 * symtab.c (symbol_cache_key): New static global.
8917 (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
8918 (SYMBOL_LOOKUP_FAILED): New macro.
8919 (symbol_cache_slot_state): New enum.
8920 (block_symbol_cache): New struct.
8921 (symbol_cache): New struct.
8922 (new_symbol_cache_size, symbol_cache_size): New static globals.
8923 (hash_symbol_entry, eq_symbol_entry): New functions.
8924 (symbol_cache_byte_size, resize_symbol_cache): New functions.
8925 (make_symbol_cache, free_symbol_cache): New functions.
8926 (get_symbol_cache, symbol_cache_cleanup): New function.
8927 (set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
8928 (symbol_cache_lookup, symbol_cache_clear_slot): New function.
8929 (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
8930 (symbol_cache_flush, symbol_cache_dump): New functions.
8931 (maintenance_print_symbol_cache): New function.
8932 (maintenance_flush_symbol_cache): New function.
8933 (symbol_cache_stats): New function.
8934 (maintenance_print_symbol_cache_statistics): New function.
8935 (symtab_new_objfile_observer): New function.
8936 (symtab_free_objfile_observer): New function.
8937 (lookup_static_symbol, lookup_global_symbol): Use symbol cache.
8938 (_initialize_symtab): Init symbol_cache_key. New parameter
8939 maint symbol-cache-size. New maint commands print symbol-cache,
8940 print symbol-cache-statistics, flush-symbol-cache.
8941 Install new_objfile, free_objfile observers.
8943 2015-01-31 Joel Brobecker <brobecker@adacore.com>
8946 * symfile.c (clear_symtab_users): Move call to breakpoint_re_set
8949 2015-01-31 Doug Evans <xdje42@gmail.com>
8951 * NEWS: Mention inlined scripts in .debug_gdb_scripts section.
8952 * auto-load.c: #include ctype.h.
8953 (struct auto_load_pspace_info): Replace member loaded_scripts with
8954 new members loaded_script_files, loaded_script_texts.
8955 (auto_load_pspace_data_cleanup): Update.
8956 (init_loaded_scripts_info): Update.
8957 (get_auto_load_pspace_data_for_loading): Update.
8958 (maybe_add_script_file): Renamed from maybe_add_script. All callers
8960 (maybe_add_script_text): New function.
8961 (clear_section_scripts): Update.
8962 (source_script_file, execute_script_contents): New functions.
8963 (source_section_scripts): Add support for
8964 SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT.
8965 (print_scripts): New function.
8966 (auto_load_info_scripts): Also print inlined scripts.
8967 (maybe_print_unsupported_script_warning): Renamed from
8968 unsupported_script_warning_print. All callers updated.
8969 (maybe_print_script_not_found_warning): Renamed from
8970 script_not_found_warning_print. All callers updated.
8971 * extension-priv.h (struct extension_language_script_ops): New member
8972 objfile_script_executor.
8973 * extension.c (ext_lang_objfile_script_executor): New function.
8974 * extension.h (objfile_script_executor_func): New typedef.
8975 (ext_lang_objfile_script_executor): Declare.
8976 * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare.
8977 * guile/guile.c (guile_extension_script_ops): Update.
8978 * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function.
8979 * python/python.c (python_extension_script_ops): Update.
8980 (gdbpy_execute_objfile_script): New function.
8982 2015-01-31 Eli Zaretskii <eliz@gnu.org>
8984 * tui/tui-io.c (tui_expand_tabs): New function.
8985 (tui_puts, tui_redisplay_readline): Expand TABs into the
8986 appropriate number of spaces.
8987 * tui/tui-regs.c: Include tui-io.h.
8988 (tui_register_format): Call tui_expand_tabs to expand TABs into
8989 the appropriate number of spaces.
8990 * tui/tui-io.h: Add prototype for tui_expand_tabs.
8992 2015-01-30 Doug Evans <dje@google.com>
8994 * NEWS: "info source" command now display producer string if present.
8995 * source.c (source_info): Print producer string if present.
8997 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
8999 * varobj.c (varobj_delete): Fix comment.
9001 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
9003 * varobj.c (create_child): Modify comment.
9005 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
9007 * ada-varobj.c (ada_number_of_children): Constify struct varobj *
9009 (ada_name_of_variable): Same.
9010 (ada_path_expr_of_child): Same.
9011 (ada_value_of_variable): Same.
9012 (ada_value_is_changeable_p): Same.
9013 (ada_value_has_mutated): Same.
9014 * c-varobj.c (varobj_is_anonymous_child): Same.
9015 (c_is_path_expr_parent): Same.
9016 (c_number_of_children): Same.
9017 (c_name_of_variable): Same.
9018 (c_path_expr_of_child): Same.
9020 (c_value_of_variable): Same.
9021 (cplus_number_of_children): Same.
9022 (cplus_name_of_variable): Same.
9023 (cplus_path_expr_of_child): Same.
9024 (cplus_value_of_variable): Same.
9025 * jv-varobj.c (java_number_of_children): Same.
9026 (java_name_of_variable): Same.
9027 (java_path_expr_of_child): Same.
9028 (java_value_of_variable): Same.
9029 * varobj.c (number_of_children): Same.
9030 (name_of_variable): Same.
9032 (varobj_ensure_python_env): Same.
9033 (varobj_get_objname): Same.
9034 (varobj_get_expression): Same.
9035 (varobj_get_display_format): Same.
9036 (varobj_get_display_hint): Same.
9037 (varobj_has_more): Same.
9038 (varobj_get_thread_id): Same.
9039 (varobj_get_frozen): Same.
9040 (dynamic_varobj_has_child_method): Same.
9041 (varobj_get_gdb_type): Same.
9042 (is_path_expr_parent): Same.
9043 (varobj_default_is_path_expr_parent): Same.
9044 (varobj_get_language): Same.
9045 (varobj_get_attributes): Same.
9046 (varobj_is_dynamic_p): Same.
9047 (varobj_get_child_range): Same.
9048 (varobj_value_has_mutated): Same.
9049 (varobj_get_value_type): Same.
9050 (number_of_children): Same.
9051 (name_of_variable): Same.
9052 (check_scope): Same.
9053 (varobj_editable_p): Same.
9054 (varobj_value_is_changeable_p): Same.
9055 (varobj_floating_p): Same.
9056 (varobj_default_value_is_changeable_p): Same.
9058 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
9060 * varobj.c (varobj_get_path_expr): Set var->path_expr.
9061 * c-varobj.c (c_path_expr_of_child): Set local var instead of
9063 (cplus_path_expr_of_child): Same.
9065 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
9067 * mi-cmd-var.c (print_varobj): Free varobj_get_expression
9069 (mi_cmd_var_info_expression): Same.
9070 * varobj.c (varobj_get_expression): Mention in the comment that
9071 the result must by freed by the caller.
9073 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
9075 * mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
9077 (varobj_update_one): Same.
9078 * varobj.c (update_type_if_necessary): Free curr_type_str and
9080 (varobj_get_type): Specify in comment that the result needs to be
9081 freed by the caller.
9083 2015-01-29 Doug Evans <dje@google.com>
9086 * dwarf2read.c (dwarf_decode_line_header): Punt if version > 4.
9088 2015-01-25 Mark Wielaard <mjw@redhat.com>
9090 * dwarf2read.c (checkproducer): Call producer_is_gcc.
9091 * utils.c (producer_is_gcc_ge_4): Likewise.
9092 (producer_is_gcc): New function.
9093 * utils.h (producer_is_gcc): New declaration.
9095 2015-01-29 Joel Brobecker <brobecker@adacore.com>
9097 * gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
9099 * gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
9100 parameter by "addr_stack" parameter.
9101 (resolve_dynamic_range): Replace "addr" parameter by
9102 "stack_addr" parameter. Update function documentation.
9103 Update code accordingly.
9104 (resolve_dynamic_array, resolve_dynamic_union)
9105 (resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
9106 (resolve_dynamic_type): Update code, following the changes made
9107 to resolve_dynamic_type_internal's interface.
9108 * dwarf2loc.h (struct property_addr_info): New.
9109 (dwarf2_evaluate_property): Replace "address" parameter
9110 by "addr_stack" parameter. Adjust function documentation.
9111 (struct dwarf2_offset_baton): New.
9112 (struct dwarf2_property_baton): Update documentation of
9113 field "referenced_type" to be more general. New field
9114 "offset_info" in union data field.
9115 * dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
9116 parameter by "addr_stack" parameter. Adjust code accordingly.
9117 Add support for PROP_ADDR_OFFSET properties.
9118 * dwarf2read.c (attr_to_dynamic_prop): Add support for
9119 DW_AT_data_member_location attributes as well. Use case
9120 statements instead of if/else condition.
9122 2015-01-29 Joel Brobecker <brobecker@adacore.com>
9124 * ada-varobj.c (ada_varobj_get_array_number_of_children):
9125 Return zero if PARENT_VALUE is NULL and parent_type's
9126 range type is dynamic.
9128 2015-01-29 Joel Brobecker <brobecker@adacore.com>
9130 * gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
9131 nonzero if the type's subtype is dynamic.
9132 (resolve_dynamic_range): Also resolve the range's subtype.
9134 2015-01-29 Alexander Klimov <alserkli@inbox.ru> (tiny patch)
9136 Pushed by Joel Brobecker <brobecker@adacore.com>.
9137 * symfile.c (unmap_overlay_command): Initialize sec to NULL.
9139 2015-01-27 Doug Evans <dje@google.com>
9141 * NEWS: Mention gdb.Objfile.username.
9142 * python/py-objfile.c (objfpy_get_username): New function.
9143 (objfile_getset): Add "username".
9145 2015-01-24 Mark Wielaard <mjw@redhat.com>
9147 * stack.c (return_command): Markup warning message with _.
9149 2015-01-24 Doug Evans <xdje42@gmail.com>
9151 * gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete.
9153 2015-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
9155 Fix 100x slowdown regression on DWZ files.
9156 * dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
9157 (struct line_header): Add offset and offset_in_dwz.
9158 (dwarf_decode_lines): Add parameter decode_mapping to the declaration.
9159 (free_line_header_voidp): New declaration.
9160 (line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
9162 (dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
9163 (handle_DW_AT_stmt_list): Use line_header_hash.
9164 (free_line_header_voidp): New function.
9165 (dwarf_decode_line_header): Initialize offset and offset_in_dwz.
9166 (dwarf_decode_lines): New parameter decode_mapping, use it.
9167 (dwarf2_free_objfile): Free line_header_hash.
9169 2015-01-23 Simon Marchi <simon.marchi@ericsson.com>
9172 * valops.c (value_rtti_indirect_type): Catch exception thrown by
9175 2015-01-15 Mark Wielaard <mjw@redhat.com>
9177 * dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
9179 * gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
9180 calling_convention an 8 bit bit field.
9181 (TYPE_NO_RETURN): New macro.
9182 * infcmd.c (finish_command): Query if function does not return
9184 * stack.c (return_command): Likewise.
9186 2015-01-23 Pedro Alves <palves@redhat.com>
9188 * linux-nat.c (linux_is_async_p): New macro.
9189 (linux_nat_is_async_p):
9190 (linux_nat_terminal_inferior): Check whether the target can async
9191 instead of whether it is already async.
9192 (linux_nat_terminal_ours): Don't check whether the target is
9194 (linux_async_pipe): Use linux_is_async_p.
9196 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
9198 * NEWS (Changes since GDB 7.9): Add 'thread apply all' option
9200 * thread.c (tp_array_compar_ascending, tp_array_compar): New.
9201 (thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
9202 Sort tp_array using tp_array_compar.
9203 (_initialize_thread): Extend thread_apply_all_command help.
9205 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
9207 * corelow.c (core_open): Call also thread_command.
9208 * gdbthread.h (thread_command): New prototype moved from ...
9209 * thread.c (thread_command): ... here.
9210 (thread_command): Make it global.
9212 2015-01-22 Pedro Alves <palves@redhat.com>
9214 * configure.ac [*mingw32*]: Check $curses_found instead of
9216 * configure: Regenerate.
9217 * windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
9218 HAVE_NCURSES_NCURSES_H checks.
9220 2015-01-22 Eli Zaretskii <eliz@gnu.org>
9222 * tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
9223 fails with the 1st arg NULL, try again with "unknown". Don't test
9224 the "cup" capability: it isn't supported by the Windows port of
9225 ncurses, but the Windows console driver is still capable of
9228 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
9230 * compile/compile.c (_initialize_compile): Use -fPIE for compile_args.
9232 2015-01-22 Eli Zaretskii <eliz@gnu.org>
9234 * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
9235 (ALLDEPFILES): Remove irix5-nat.c. These two are part of the
9236 reason that "make TAGS" is broken.
9238 2015-01-22 Chen Gang <gang.chen.5i5j@gmail.com>
9240 * hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
9241 and check additional store instructions.
9243 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
9245 * MAINTAINERS (Write After Approval): Add "Wei-cheng Wang".
9247 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
9249 * ppc-linux-tdep.c (ppc_skip_trampoline_code,
9250 ppc_canonicalize_syscall, ppc_linux_syscall_record,
9251 ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments.
9252 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
9253 * rs6000-tdep.c (rs6000_epilogue_frame_cache,
9254 rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register,
9255 rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4,
9256 ppc_process_record_op19, ppc_process_record_op31,
9257 ppc_process_record_op59, ppc_process_record_op60,
9258 ppc_process_record_op63): Likewise.
9260 2015-01-20 Joel Brobecker <brobecker@adacore.com>
9262 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string)
9263 (linux_ptrace_test_ret_to_nx): Use safe_strerror instead of
9266 2015-01-20 Wei-cheng Wang <cole945@gmail.com>
9268 * rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19,
9269 ppc_process_record_op31, ppc_process_record_op59,
9270 ppc_process_record_op60, ppc_process_record_op63,
9271 ppc_process_record): Fix -Wformat warning.
9272 * rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60):
9273 Remove unused variables.
9275 2015-01-20 Chen Gang <gang.chen.5i5j@gmail.com>
9277 * MAINTAINERS (Write After Approval): Add "Chen Gang".
9279 2015-01-19 Eli Zaretskii <eliz@gnu.org>
9281 * configure.ac [*mingw32*]: Only add windows-termcap.o to
9282 CONFIG_OBS if not building with a curses library.
9283 * configure: Regenerate.
9285 * windows-termcap.c: Include defs.h. Make the whole body empty if
9286 either one of HAVE_CURSES_H or HAVE_NCURSES_H or
9287 HAVE_NCURSES_NCURSES_H is defined.
9289 2015-01-19 Joel Brobecker <brobecker@adacore.com>
9291 * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
9292 from end of line to start of next line.
9294 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
9296 * ppc-linux-tdep.c (ppc_skip_trampoline_code):
9297 Scan PLT stub backward for reverse debugging.
9298 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
9300 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
9301 Ulrich Weigand <uweigand@de.ibm.com>
9303 * configure.tgt (powerpc*-*-linux): Add linux-record.o to
9305 (ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall
9307 (ppc_canonicalize_syscall, ppc_linux_syscall_record,
9308 ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions.
9309 (ppc_linux_init_abi): Set process_record, process_record_signal.
9310 * ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and
9311 ppc_linux_record_tdep to gdbarch_tdep.
9312 (ppc_process_record): New declaration.
9313 * rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4,
9314 ppc_process_record_op19, ppc_process_record_op31,
9315 ppc_process_record_op59, ppc_process_record_op60,
9316 ppc_process_record_op63, ppc_process_record): New functions.
9318 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
9320 * rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to
9321 rs6000_in_function_epilogue_frame_p and add an argument
9323 (rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id,
9324 rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer):
9326 (rs6000_epilogue_frame_unwind): New.
9327 (rs6000_gdbarch_init): Append epilogue unwinder.
9329 2015-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
9331 * nat/linux-personality.c: Replace "#ifndef
9332 HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
9333 !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
9336 2015-01-16 Eli Zaretskii <eliz@gnu.org>
9338 * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
9340 (_initialize_tui_win) <border-kind, border-mode>:
9341 <active-border-mode>: Use tui_set_var_cmd as the "set" function.
9342 (tui_set_tab_width_command): Fix the commentary.
9344 * tui/tui-win.h: Add prototype for tui_rehighlight_all.
9346 * tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
9348 (tui_set_tab_width_command): Delete and recreate the source and
9349 the disassembly windows, to show the effect of the changed tab
9352 * tui/tui-data.h (LINE_PREFIX): Make shorter
9353 (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
9354 "Thread NNNNN.XXXX" thread ID notation on Windows.
9356 2015-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
9358 Fix gcc-5 compilation.
9359 * hppa-tdep.c (inst_saves_gr): Fix parentheses typo.
9361 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
9363 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
9364 (linux-personality.o): New rule.
9365 * common/common-defs.h: Include <stdint.h>.
9366 * config/aarch64/linux.mh (NATDEPFILES): Include
9367 linux-personality.o.
9368 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
9369 * config/arm/linux.mh (NATDEPFILES): Likewise.
9370 * config/i386/linux64.mh (NATDEPFILES): Likewise.
9371 * config/i386/linux.mh (NATDEPFILES): Likewise.
9372 * config/ia64/linux.mh (NATDEPFILES): Likewise.
9373 * config/m32r/linux.mh (NATDEPFILES): Likewise.
9374 * config/m68k/linux.mh (NATDEPFILES): Likewise.
9375 * config/mips/linux.mh (NATDEPFILES): Likewise.
9376 * config/pa/linux.mh (NATDEPFILES): Likewise.
9377 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
9378 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
9379 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
9380 * config/s390/linux.mh (NATDEPFILES): Likewise.
9381 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
9382 * config/sparc/linux.mh (NATDEPFILES): Likewise.
9383 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
9384 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
9385 * defs.h: Remove #include <stdint.h> (moved to
9386 common/common-defs.h).
9387 * linux-nat.c: Include nat/linux-personality.h. Remove #include
9388 <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
9389 nat/linux-personality.c).
9390 (linux_nat_create_inferior): Remove code to disable address space
9391 randomization (moved to nat/linux-personality.c). Create cleanup
9392 to disable address space randomization.
9393 * nat/linux-personality.c: New file.
9394 * nat/linux-personality.h: Likewise.
9396 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
9398 * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
9399 common/posix-strerror.c.
9400 (posix-strerror.o): New rule.
9401 (mingw-strerror.o): Likewise.
9402 * common/common-utils.h (safe_strerror): Move prototype to here,
9404 * common/common.host: New file.
9405 * common/mingw-strerror.c: Likewise.
9406 * common/posix-strerror.c: Likewise.
9407 * configure: Regenerated.
9408 * configure.ac: Source common/common.host. Add variable
9409 common_host_obs to gdb_host_obs.
9410 * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
9411 gdb/common/posix-strerror.c when warning about the use of
9413 * mingw-hdep.c (safe_strerror): Remove definition; move it to
9414 common/mingw-strerror.c.
9415 * posix-hdep.c (safe_strerror): Remove definition; move it to
9416 common/posix-hdep.c.
9417 * utils.h (safe_strerror): Remove prototype; move to
9418 common/common-utils.h.
9420 2015-01-15 Joel Brobecker <brobecker@adacore.com>
9424 2015-01-15 Joel Brobecker <brobecker@adacore.com>
9426 * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
9427 ___XA type if the array has already been fixed.
9429 2015-01-14 Yao Qi <yao@codesourcery.com>
9431 * Makefile.in (ppc-linux.o): New rule.
9432 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
9433 * configure.ac: AC_CHECK_FUNCS(getauxval).
9434 * config.in: Re-generated.
9435 * configure: Re-generated.
9436 * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
9438 * nat/ppc-linux.c: New file.
9439 * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
9440 Call ppc64_64bit_inferior_p.
9442 2015-01-14 Yao Qi <yao@codesourcery.com>
9444 * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
9446 (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
9447 (PPC_FEATURE_HAS_DFP): Likewise.
9448 (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
9449 (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
9450 (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
9451 Include "nat/ppc-linux.h".
9452 * nat/ppc-linux.h: New file.
9453 * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
9455 2015-01-14 Pedro Alves <palves@redhat.com>
9458 * breakpoint.c: Include "interps.h".
9459 (bpstat_do_actions_1): Also check whether the interpreter is
9462 2015-01-14 Pedro Alves <palves@redhat.com>
9465 * infrun.c (reinstall_readline_callback_handler_cleanup): Don't
9466 reinstall if the interpreter is sync.
9468 2015-01-13 Doug Evans <dje@google.com>
9470 * objfiles.c (objfile_filename): New function.
9471 * objfiles.h (objfile_filename): Declare it.
9472 (objfile_name): Add function comment.
9473 * python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
9474 bfd file name (which may be realpath'd), and the original name.
9476 2015-01-13 Joel Brobecker <brobecker@adacore.com>
9478 * NEWS: Create a new section for the next release branch.
9479 Rename the section of the current branch, now that it has
9482 2015-01-13 Joel Brobecker <brobecker@adacore.com>
9484 GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
9485 * version.in: Bump version to 7.9.50.DATE-cvs.
9487 2015-01-13 Joel Brobecker <brobecker@adacore.com>
9489 * nat/linux-procfs.c (linux_proc_attach_tgid_threads):
9490 Remove trailing new-line in argument of call to warning.
9492 2015-01-13 Joel Brobecker <brobecker@adacore.com>
9494 * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
9495 new-line in argument of call to "warning".
9497 2015-01-13 Joel Brobecker <brobecker@adacore.com>
9499 * ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
9500 in static block, then try searching for primitive types.
9502 2015-01-12 Patrick Palka <patrick@parcs.ath.cx>
9504 * top.h (gdb_add_history): Declare.
9505 * top.c (command_count): New variable.
9506 (gdb_add_history): New function.
9507 (gdb_safe_append_history): New static function.
9508 (quit_force): Call it.
9509 (command_line_input): Use gdb_add_history instead of
9511 * event-top.c (command_line_handler): Likewise.
9513 2015-01-12 James Clarke <jrtc27@jrtc27.com> (tiny patch)
9516 * darwin-nat.c: Replace <machine/setjmp.h> #include by
9517 <setjmp.h> #include.
9519 2015-01-11 Doug Evans <xdje42@gmail.com>
9521 * dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.
9523 2015-01-11 Doug Evans <xdje42@gmail.com>
9526 * NEWS: The "maint demangle" command is renamed as "demangle".
9527 * demangle.c: #include cli/cli-utils.h, language.h.
9528 (demangle_command): New function.
9529 (_initialize_demangle): Add new command "demangle".
9530 * maint.c (maintenance_demangle): Stub out.
9531 (_initialize_maint_cmds): Update help text for "maint demangle",
9532 and mark as deprecated.
9534 2015-01-11 Mark Kettenis <kettenis@gnu.org>
9536 * inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
9537 inferior_thread is a function.
9539 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
9541 * Makefile.in (.y.c): Don't munge yacc's #line
9544 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
9546 * utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
9547 to prompt for input.
9548 * tui/tui-hooks.c (tui_query_hook): Remove.
9549 (tui_install_hooks): Don't set deprecated_query_hook.
9550 * tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
9551 height calculation. Always update the command window's cur_line.
9553 2015-01-09 Pedro Alves <palves@redhat.com>
9555 * breakpoint.c (hardware_breakpoint_inserted_here_p): New
9557 * breakpoint.h (hardware_breakpoint_inserted_here_p): New
9559 * linux-nat.c (linux_nat_status_is_event): Move higher up in file.
9560 (linux_resume_one_lwp): Store the thread's PC. Adjust to clear
9562 (check_stopped_by_watchpoint): New function.
9563 (save_sigtrap): Reimplement.
9564 (linux_nat_stopped_by_watchpoint): Adjust.
9565 (linux_nat_lp_status_is_event): Delete.
9566 (stop_wait_callback): Only call save_sigtrap after storing the
9568 (status_callback): If the thread had been stopped for a breakpoint
9569 that has since been removed, discard the event and resume the LWP.
9570 (count_events_callback, select_event_lwp_callback): Use
9571 lwp_status_pending_p instead of linux_nat_lp_status_is_event.
9572 (cancel_breakpoint): Rename to ...
9573 (check_stopped_by_breakpoint): ... this. Record whether the LWP
9574 stopped for a software breakpoint or hardware breakpoint.
9575 (select_event_lwp): Only give preference to the stepping LWP in
9576 all-stop mode. Adjust comments.
9577 (stop_and_resume_callback): Remove references to new_pending_p.
9578 (linux_nat_filter_event): Likewise. Leave exit events of the
9579 leader thread pending here. Handle signal short circuiting here.
9580 Only call save_sigtrap after storing the pending waitstatus.
9581 (linux_nat_wait_1): Remove 'retry' label. Remove references to
9582 new_pending. Don't handle leaving events the caller is not
9583 interested in pending here, nor handle signal short-circuiting
9584 here. Also give equal priority to all LWPs that have had events
9585 in non-stop mode. If reporting a software breakpoint event,
9586 unadjust the LWP's PC.
9587 * linux-nat.h (enum lwp_stop_reason): New.
9588 (struct lwp_info) <stop_pc>: New field.
9589 (struct lwp_info) <stopped_by_watchpoint>: Delete field.
9590 (struct lwp_info) <stop_reason>: New field.
9591 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
9593 2015-01-09 Pedro Alves <palves@redhat.com>
9595 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
9596 Set the LWP's 'resumed' flag.
9598 2015-01-09 Pedro Alves <palves@redhat.com>
9600 * linux-nat.c (linux_resume_one_lwp): New function.
9601 (resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
9602 (linux_nat_resume): Use lwp_status_pending_p and
9603 linux_resume_one_lwp.
9604 (linux_handle_syscall_trap): Use linux_resume_one_lwp.
9605 (linux_handle_extended_wait): Use linux_resume_one_lwp.
9606 (status_callback, running_callback): Use lwp_status_pending_p.
9607 (lwp_status_pending_p): New function.
9608 (stop_and_resume_callback): Use lwp_status_pending_p.
9609 (linux_nat_filter_event): Use linux_resume_one_lwp.
9610 (linux_nat_wait_1): Always use status_callback to look for an LWP
9611 with a pending status. Use linux_resume_one_lwp.
9612 (resume_stopped_resumed_lwps): Use lwp_status_pending_p and
9613 linux_resume_one_lwp.
9615 2015-01-09 Pedro Alves <palves@redhat.com>
9617 * breakpoint.c (bp_location_inserted_here_p): New function,
9618 factored out from ...
9619 (breakpoint_inserted_here_p): ... here. Use
9620 ALL_BP_LOCATIONS_AT_ADDR.
9621 (software_breakpoint_inserted_here_p): Use
9622 bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.
9624 2014-01-09 Pedro Alves <palves@redhat.com>
9626 Skip enabling event reporting if the kernel supports
9628 * linux-thread-db.c: Include "nat/linux-ptrace.h".
9629 (thread_db_use_events): New function.
9630 (try_thread_db_load_1): Check thread_db_use_events before enabling
9632 (update_thread_state): New function.
9633 (attach_thread): Use it. Check thread_db_use_events before
9634 enabling event reporting.
9635 (thread_db_detach): Check thread_db_use_events before disabling
9637 (find_new_threads_callback): Check thread_db_use_events before
9638 enabling event reporting. Update the thread's state if not using
9639 libthread_db events.
9641 2015-01-09 Pedro Alves <palves@redhat.com>
9643 * linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
9644 about to wait for is > 0.
9645 * linux-thread-db.c (find_new_threads_callback): Ignore thread if
9646 the kernel thread ID is -1.
9648 2015-01-09 Pedro Alves <palves@redhat.com>
9650 * linux-nat.c (attach_proc_task_lwp_callback): New function.
9651 (linux_nat_attach): Use linux_proc_attach_tgid_threads.
9652 (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
9653 ptrace option flags.
9654 * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
9656 * nat/linux-procfs.c: Include <dirent.h>.
9657 (linux_proc_get_int): New parameter "warn". Handle it.
9658 (linux_proc_get_tgid): Adjust.
9659 (linux_proc_get_tracerpid): Rename to ...
9660 (linux_proc_get_tracerpid_nowarn): ... this.
9661 (linux_proc_pid_get_state): New function, factored out from
9662 (linux_proc_pid_has_state): ... this. Add new parameter "warn"
9664 (linux_proc_pid_is_gone): New function.
9665 (linux_proc_pid_is_stopped): Adjust.
9666 (linux_proc_pid_is_zombie_maybe_warn)
9667 (linux_proc_pid_is_zombie_nowarn): New functions.
9668 (linux_proc_pid_is_zombie): Use
9669 linux_proc_pid_is_zombie_maybe_warn.
9670 (linux_proc_attach_tgid_threads): New function.
9671 * nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
9672 (linux_proc_get_tracerpid): Rename to ...
9673 (linux_proc_get_tracerpid_nowarn): ... this, and update comment.
9674 (linux_proc_pid_is_gone): New declaration.
9675 (linux_proc_pid_is_zombie): Update comment.
9676 (linux_proc_pid_is_zombie_nowarn): New declaration.
9677 (linux_proc_attach_lwp_func): New typedef.
9678 (linux_proc_attach_tgid_threads): New declaration.
9679 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
9680 use nowarn functions.
9681 (linux_ptrace_attach_fail_reason_string): Move here from
9682 gdbserver/linux-low.c and rename.
9683 (ptrace_supports_feature): If the current ptrace options are not
9684 known yet, check them now, instead of asserting.
9685 * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
9688 2015-01-09 Pedro Alves <palves@redhat.com>
9690 * linux-thread-db.c (thread_db_find_new_threads_silently)
9691 (try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
9692 (find_new_threads_once): Print debug output on gdb_stdlog.
9694 2015-01-09 Chen Gang <gang.chen.5i5j@gmail.com>
9695 Pedro Alves <palves@redhat.com>
9697 * compile/compile.c: Include "gdb_wait.h".
9698 (do_rmdir): Check return value, and free 'zap'.
9700 2015-01-08 Pedro Alves <palves@redhat.com>
9701 Yao Qi <yao@codesourcery.com>
9703 * dwarf2loc.c (indirect_pieced_value): Don't call
9704 gdb_sign_extend. Call extract_signed_integer instead.
9705 * utils.c (gdb_sign_extend): Remove.
9706 * utils.h (gdb_sign_extend): Remove declaration.
9708 2015-01-07 Pierre Muller <muller@sourceware.org>
9711 * stabsread.c (define_symbol): Set language for C++ special symbols.
9713 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
9715 * inflow.c (initial_gdb_ttystate): Tweak comment.
9717 2015-01-07 Joel Brobecker <brobecker@adacore.com>
9719 * inflow.c (set_initial_gdb_ttystate): Add empty line after
9720 comment documenting function.
9722 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
9724 * terminal.h (set_initial_gdb_ttystate): Declare.
9725 * inflow.c (initial_gdb_ttystate): New static variable.
9726 (set_initial_gdb_ttystate): New setter.
9727 (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate
9728 instead of our current terminal state.
9729 * top.c (gdb_init): Call set_initial_gdb_ttystate.
9731 2015-01-07 Joel Brobecker <brobecker@adacore.com>
9733 * guile/scm-type.c (tyscm_array_1): Add comment.
9734 * python/py-type.c (typy_array_1): Add comment.
9736 2015-01-06 Joel Brobecker <brobecker@adacore.com>
9738 * guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
9739 error if N2 is equal to N1 - 1.
9741 2015-01-06 Joel Brobecker <brobecker@adacore.com>
9743 * python/py-type.c (typy_array_1): Do not raise negative-length
9744 exception if N2 is equal to N1 - 1.
9746 2015-01-03 Doug Evans <xdje42@gmail.com>
9748 * c-exp.y: Whitespace cleanup.
9749 (classify_inner_name): Remove extra ;.
9751 2015-01-02 Maciej W. Rozycki <macro@codesourcery.com>
9753 * mips-tdep.c (mips32_scan_prologue): Keep the extracted stack
9756 2015-01-02 Doug Evans <dje@google.com>
9758 * dwarf2read.c (setup_type_unit_groups): Remove outdated comment.
9760 2015-01-02 Doug Evans <dje@google.com>
9762 * symtab.h (struct symbol): Fix typo in comment.
9764 2015-01-01 Joel Brobecker <brobecker@adacore.com>
9766 Update year range in copyright notice of all files.
9768 2015-01-01 Joel Brobecker <brobecker@adacore.com>
9770 * top.c (print_gdb_version): Update copyright year to 2015.
9772 2015-01-01 Joel Brobecker <brobecker@adacore.com>
9774 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
9776 For older changes see ChangeLog-2014.
9782 version-control: never
projects / external / binutils.git / blob