1 2015-03-25 Gary Benson <gbenson@redhat.com>
2 Pedro Alves <palves@redhat.com>
4 * target.c (fileio_ft_t): New typedef, define object vector.
5 (fileio_fhandles): New static variable.
6 (is_closed_fileio_fh): New macro.
7 (lowest_closed_fd): New static variable.
8 (acquire_fileio_fd): New function.
9 (release_fileio_fd): Likewise.
10 (fileio_fd_to_fh): New macro.
11 (target_fileio_open): Wrap the file descriptor on success.
12 (target_fileio_pwrite): Updated to use wrapped file descriptor.
13 (target_fileio_pread): Likewise.
14 (target_fileio_close): Likewise.
16 2015-03-24 Pedro Alves <palves@redhat.com>
18 * thread.c (thread_apply_all_command): Take exited threads into
21 2015-03-24 Pedro Alves <palves@redhat.com>
23 * infrun.c (resume, proceed): Mention
24 switch_back_to_stepped_thread, not switch_back_to_stepping.
26 2015-03-24 Pedro Alves <palves@redhat.com>
28 * infrun.c (user_visible_resume_ptid): Rewrite going from
29 most-locked to unlocked instead of the opposite. Move comment ...
30 * infrun.h (user_visible_resume_ptid): ... here.
32 2015-03-24 Pedro Alves <palves@redhat.com>
34 * linux-nat.c (linux_nat_resume): Output debug logs before trying
35 to resume the event lwp. Use the lwp's ptid instead of the passed
36 in (maybe wildcard) ptid.
37 (stop_wait_callback): Tweak debug log output.
38 (check_stopped_by_breakpoint): Tweak debug log output. Also dump
40 (linux_nat_filter_event): In debug output, distinguish a
41 resume_stop SIGSTOP from a delayed SIGSTOP. Output debug logs
42 before trying to resume the lwp.
44 2015-03-24 Joel Brobecker <brobecker@adacore.com>
46 * gdbtypes.h (struct dynamic_prop_list) <prop>: Remove
48 * gdbtypes.c (get_dyn_prop): Adjust, following change above.
49 (add_dyn_prop, copy_dynamic_prop_list): Likewise.
51 2015-03-24 Joel Brobecker <brobecker@adacore.com>
53 * gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_DATA_LOCATION>:
54 Renames DYN_ATTR_DATA_LOCATION.
55 (TYPE_DATA_LOCATION): Use DYN_PROP_DATA_LOCATION instead of
56 DYN_ATTR_DATA_LOCATION.
57 * dwarf2read.c (set_die_type): Use DYN_PROP_DATA_LOCATION
58 instead of DYN_ATTR_DATA_LOCATION.
60 2015-03-24 Pedro Alves <palves@redhat.com>
62 * breakpoint.c (until_break_command): Adjust call to proceed.
63 * gdbthread.h (struct thread_control_state) <stepping_command>:
65 * infcall.c (run_inferior_call): Adjust call to proceed.
66 * infcmd.c (run_command_1, proceed_thread_callback, continue_1):
67 Adjust calls to proceed.
68 (set_step_frame): Set the current thread's step_start_function
70 (step_once): Adjust calls to proceed.
71 (jump_command, signal_command, until_next_command)
72 (finish_backward, finish_forward, proceed_after_attach_callback)
73 (attach_command_post_wait): Adjust calls to proceed.
74 * infrun.c (proceed_after_vfork_done): Adjust call to proceed.
75 (do_target_resume): New function, factored out from ...
76 (resume): ... here. Remove 'step' parameter. Instead, check
77 currently_stepping to determine whether the thread should be
79 (proceed): Remove 'step' parameter and don't set the thread's
80 step_start_function here. Adjust call to 'resume'.
81 (handle_inferior_event): Adjust calls to 'resume'.
82 (switch_back_to_stepped_thread): Use do_target_resume instead of
84 (keep_going): Adjust calls to 'resume'.
85 * infrun.h (proceed): Remove 'step' parameter.
87 * windows-nat.c (do_initial_windows_stuff): Adjust call to
89 * mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
91 2015-03-24 Pedro Alves <palves@redhat.com>
93 * gdbthread.h (struct thread_control_state) <stepping_command>:
95 * infcmd.c (step_once): Pass step=1 to clear_proceed_status. Set
96 the thread's stepping_command field.
97 * infrun.c (resume): Check the thread's stepping_command flag to
98 determine which threads should be resumed. Rename 'entry_step'
100 (clear_proceed_status_thread): Clear 'stepping_command'.
101 (schedlock_applies): Change parameter type to struct thread_info
103 (find_thread_needs_step_over): Remove 'step' parameter. Adjust.
104 (switch_back_to_stepped_thread): Adjust calls to
106 (_initialize_infrun): Adjust "set scheduler-locking step" help.
108 2015-03-24 Pedro Alves <palves@redhat.com>
110 * infrun.c (step_start_function): Delete and ...
111 * gdbthread.h (struct thread_control_state) <step_start_function>:
112 ... now a field here.
113 * infrun.c (clear_proceed_status_thread): Clear the thread's
115 (proceed, process_event_stop_test, print_stop_event): Adjust.
117 2015-03-24 Pedro Alves <palves@redhat.com>
119 * infrun.c (proceed): No longer handle negative step.
121 2015-03-24 Gary Benson <gbenson@redhat.com>
123 * nat/x86-linux.h (x86_linux_new_thread): New declaration.
124 (x86_linux_prepare_to_resume): Likewise.
125 * x86-linux-nat.c (x86_linux_new_thread):
126 Moved to nat/x86-linux.c.
127 (x86_linux_prepare_to_resume): Likewise.
128 * nat/x86-linux.c (x86_linux_new_thread): New function.
129 (x86_linux_prepare_to_resume): Likewise.
131 2015-03-24 Gary Benson <gbenson@redhat.com>
133 * nat/x86-linux-dregs.h: New file.
134 * nat/x86-linux-dregs.c: Likewise.
135 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
136 (x86-linux-dregs.o): New rule.
137 * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
138 * config/i386/linux64.mh (NATDEPFILES): Likewise.
139 * x86-linux-nat.c: Include nat/x86-linux-dregs.h.
140 (u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
141 (x86_linux_dr_get): Likewise.
142 (x86_linux_dr_set): Likewise.
143 (x86_linux_dr_get_addr): Likewise.
144 (x86_linux_dr_get_control): Likewise.
145 (x86_linux_dr_get_status): Likewise.
146 (update_debug_registers_callback): Likewise.
147 (x86_linux_dr_set_control): Likewise.
148 (x86_linux_dr_set_addr): Likewise.
149 (x86_linux_update_debug_registers): Likewise.
151 2015-03-24 Gary Benson <gbenson@redhat.com>
153 * x86-linux-nat.c (x86_linux_update_debug_registers):
154 New function, factored out from...
155 (x86_linux_prepare_to_resume): ...this.
157 2015-03-24 Gary Benson <gbenson@redhat.com>
159 * x86-linux-nat.c (x86_linux_dr_get): Update comments.
160 (x86_linux_dr_set): Likewise.
161 (x86_linux_dr_get_addr): Likewise.
162 (x86_linux_dr_get_control): Likewise.
163 (x86_linux_dr_get_status): Likewise.
164 (update_debug_registers_callback): Likewise.
165 (x86_linux_dr_set_control): Likewise.
166 (x86_linux_dr_set_addr): Likewise.
167 (x86_linux_prepare_to_resume): Likewise.
168 (x86_linux_new_thread): Likewise.
170 2015-03-24 Gary Benson <gbenson@redhat.com>
172 * x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion.
173 (x86_linux_new_thread): Rename argument.
175 2015-03-24 Gary Benson <gbenson@redhat.com>
177 * nat/x86-linux.h: New file.
178 * nat/x86-linux.c: Likewise.
179 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
180 (x86-linux.o): New rule.
181 * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
182 * config/i386/linux64.mh (NATDEPFILES): Likewise.
183 * nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
184 (lwp_set_arch_private_info): New declaration.
185 (lwp_arch_private_info): Likewise.
186 * linux-nat.c (lwp_set_arch_private_info): New function.
187 (lwp_arch_private_info): Likewise.
188 * x86-linux-nat.c: Include nat/x86-linux.h.
189 (arch_lwp_info): Removed structure.
190 (update_debug_registers_callback):
191 Use lwp_set_debug_registers_changed.
192 (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
193 and lwp_set_debug_registers_changed.
194 (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
196 2015-03-24 Gary Benson <gbenson@redhat.com>
198 * nat/linux-nat.h (ptid_of_lwp): New declaration.
199 (lwp_is_stopped): Likewise.
200 (lwp_stop_reason): Likewise.
201 * linux-nat.c (ptid_of_lwp): New function.
202 (lwp_is_stopped): Likewise.
203 (lwp_is_stopped_by_watchpoint): Likewise.
204 * x86-linux-nat.c (update_debug_registers_callback):
206 (x86_linux_prepare_to_resume): Use ptid_of_lwp and
209 2015-03-24 Gary Benson <gbenson@redhat.com>
211 * linux-nat.h (linux_stop_lwp): Move declaration to...
212 * nat/linux-nat.h (linux_stop_lwp): New declaration.
214 2015-03-24 Gary Benson <gbenson@redhat.com>
216 * linux-nat.h: Include nat/linux-nat.h.
217 (iterate_over_lwps): Move declaration to nat/linux-nat.h.
218 * nat/linux-nat.h (struct lwp_info): New forward declaration.
219 (iterate_over_lwps_ftype): New typedef.
220 (iterate_over_lwps): New declaration.
221 * linux-nat.h (iterate_over_lwps): Update comment. Use
222 iterate_over_lwps_ftype. Update callback return value check.
224 2015-03-24 Gary Benson <gbenson@redhat.com>
226 * x86-nat.h (x86_debug_reg_state): Move declaration to...
227 * nat/x86-dregs.h (x86_debug_reg_state): New declaration.
229 2015-03-24 Gary Benson <gbenson@redhat.com>
231 * nat/linux-nat.h (current_lwp_ptid): New declaration.
232 * linux-nat.c (current_lwp_ptid): New function.
233 * x86-linux-nat.c: Include nat/linux-nat.h.
234 (x86_linux_dr_get_addr): Use current_lwp_ptid.
235 (x86_linux_dr_get_control): Likewise.
236 (x86_linux_dr_get_status): Likewise.
237 (x86_linux_dr_set_control): Likewise.
238 (x86_linux_dr_set_addr): Likewise.
240 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
243 * breakpoint.c (create_breakpoint): Set thread on breakpoint struct.
245 2015-03-23 Joel Brobecker <brobecker@adacore.com>
247 * ser-mingw.c (ser_windows_setparity): Fix indentation.
248 * ser-unix.c (hardwire_setparity): Likewise.
250 2015-03-23 Yurij Grechishhev <yurij.grechishhev@gmail.com>
252 * NEWS: Mention set/show serial parity command.
253 * monitor.c (monitor_open): Call serial_setparity.
254 * remote.c (remote_open_1): Likewise.
255 * ser-base.c (ser_base_serparity): New function.
256 * ser-base.h (ser_base_setparity): Add declaration.
257 * ser-go32.c (dos_ops): Set "setparity" field.
258 * ser-mingw.c (ser_windows_raw): Do not set state.fParity and
260 (ser_windows_setparity): New function.
261 (hardwire_ops): Add ser_windows_setparity.
262 (tty_ops): Add NULL for setparity field.
263 (pipe_ops): Add ser_base_setparity.
265 * ser-pipe.c (pipe_ops): Likewise.
266 * ser-tcp.c (tcp_ops): Likewise.
267 * ser-unix.c (hardwire_setparity): Add declaration.
268 (hardwire_raw): Don't reset PARENB flag.
269 (hardwire_setparity): New function.
270 (hardwire_ops): Add hardwire_setparity.
271 * serial.c (serial_setparity): New function.
272 (serial_parity): New global.
273 (parity_none, parity_odd, parity_even, parity_enums, parity):
275 (set_parity): New function.
276 (_initialize_serial): Add set/show serial parity commands.
277 * serial.h (GDBPARITY_NONE): Define.
278 (GDBPARITY_ODD): Define.
279 (GDBPARITY_EVEN): Define.
280 (serial_setparity) Add declaration.
281 (struct serial_ops): Add setparity field.
282 * target.h (serial_parity): Add declaration.
284 2015-03-23 Keith Seitz <keiths@redhat.com>
286 * linespec.c (linespec_lexer_lex_keyword): Update comment.
288 2015-03-23 Keith Seitz <keiths@redhat.com>
290 * breakpoint.c (parse_breakpoint_sals): Use
291 linespec_lexer_lex_keyword to ascertain if the user specified
293 * linespec.c [IF_KEYWORD_INDEX]: Define.
294 (linespec_lexer_lex_keyword): Export.
295 (struct ls_parser) <keyword_ok>: Remove.
296 A keyword is only a keyword if not followed by another keyword.
297 (linespec_lexer_lex_one): Remove keyword_ok handling.
298 Add comment explaining why the parsing stream is not advanced
299 when a keyword is seen.
300 (parse_linespec): Remove parser->keyword_ok.
301 * linespec.h (linespec_lexer_lex_keyword): Add declaration.
303 2015-03-23 Keith Seitz <keiths@redhat.com>
306 * dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
307 if we find a static method with DW_AT_vtable_elem_location.
309 2015-03-21 Eli Zaretskii <eliz@gnu.org>
311 * tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
312 before the second loop, to avoid undefined behavior. Reported by
313 Anton Blanchard <anton@samba.org>.
315 2015-03-20 Keven Boell <keven.boell@intel.com>
317 * gdbtypes.c (resolve_dynamic_type_internal): Adapt
318 data_location usage to linked list.
319 (resolve_dynamic_type_internal): Adapt data_location to
321 (get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
322 (copy_type_recursive, copy_type): Add copy of linked list.
323 * gdbtypes.h (enum dynamic_prop_node_kind): New enum.
324 (struct dynamic_prop_list): New struct.
325 * dwarf2read.c (set_die_type): Set data_location data.
327 2015-03-20 Pedro Alves <palves@redhat.com>
329 * i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
330 inner block and make it const.
331 * machoread.c (get_archive_prefix_len): Make "lparen" const.
333 2015-03-20 Pedro Alves <palves@redhat.com>
335 * breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
336 * breakpoint.h (set_breakpoint_condition): Update declaration.
338 2015-03-20 Pedro Alves <palves@redhat.com>
340 * tui/tui-io.c (tui_expand_tabs): Make "s1" const.
342 2015-03-20 Pedro Alves <palves@redhat.com>
344 * xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
346 2015-03-20 Pedro Alves <palves@redhat.com>
348 * remote-m32r-sdi.c (m32r_open): Make "port_str" const.
350 2015-03-20 Pedro Alves <palves@redhat.com>
352 * nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
353 (nto_init_solib_absolute_prefix): Likewise.
355 2015-03-20 Pedro Alves <palves@redhat.com>
357 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
358 * spu-tdep.c (spu_gdbarch_init): Make "name" const.
360 2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
362 * config/djgpp/README: Remove gdb.hp.
364 2015-03-20 Yao Qi <yao.qi@linaro.org>
366 * aarch64-tdep.c (aarch64_gdbarch_init): Don't call
367 set_gdbarch_cannot_step_breakpoint.
369 2015-03-19 Pedro Alves <palves@redhat.com>
371 * linux-nat.c (linux_resume_one_lwp): Rename to ...
372 (linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
373 instead call perror_with_name.
374 (check_ptrace_stopped_lwp_gone): New function.
375 (linux_resume_one_lwp): Reimplement as wrapper around
376 linux_resume_one_lwp_throw that swallows errors if the LWP is
378 (resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
379 swallows errors if the LWP is gone. Use
380 linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
382 2015-03-19 Pedro Alves <palves@redhat.com>
384 * linux-nat.c (status_callback): Return early if the LWP has no
387 2015-03-19 Pedro Alves <palves@redhat.com>
389 * linux-nat.c (select_event_lwp_callback): Update comment to no
390 longer mention SIGTRAP.
392 2015-03-18 Tristan Gingold <gingold@adacore.com>
394 * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
395 redirection code to ...
396 (amd64_windows_frame_decode_insns): ... Here. Fix in prologue
397 checks. Fix SAVE_NONVOL operations. Add debug code and comments.
399 2015-03-18 Gary Benson <gbenson@redhat.com>
401 (remote_protocol_features): Remove the "vFile:fstat" feature.
402 (remote_hostio_fstat): Probe for "vFile:fstat" support.
404 2015-03-11 Yao Qi <yao.qi@linaro.org>
407 * aarch64-linux-tdep.c: Include xml-syscall.h
408 (aarch64_linux_get_syscall_number): New function.
409 (aarch64_linux_init_abi): Call
410 set_gdbarch_get_syscall_number.
411 * syscalls/aarch64-linux.xml: New file.
413 2015-03-17 Yurij Grechishhev <yurij.grechishhev@gmail.com>
415 * ser-base.h (ser_base_setstopbits): Change second argument name
416 from "rate" to "num".
418 2015-03-17 Gary Benson <gbenson@redhat.com>
419 Luke Allardyce <lukeallardyce@gmail.com>
422 * common/common-remote-fileio.h (sys/stat.h): New include.
423 (stuct stat): Remove forward declaration.
425 2015-03-16 John Baldwin <jhb@FreeBSD.org>
427 * fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
428 before writing core register notes.
430 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
431 Pedro Alves <palves@redhat.com>
433 * gdb_curses.h (tgetnum): Mark with EXTERN_C.
434 * stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
435 (tgoto): Wrap with extern "C".
437 2015-03-16 Pedro Alves <palves@redhat.com>
438 Yuanhui Zhang <asmwarrior@gmail.com>
440 * stub-termcap.c (tputs): Change prototype.
442 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
443 Pedro Alves <palves@redhat.com>
445 * windows-nat.c (struct thread_info_struct): Rename to ...
446 (struct windows_thread_info_struct): ... this.
447 (thread_info): Rename to ...
448 (windows_thread_info): ... this.
451 2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
452 Pedro Alves <palves@redhat.com>
454 * NEWS: New Removed targets and native configurations.
456 2015-03-13 Jan Kratochvil <jan.kratochvil@redhat.com>
459 * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
460 (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
461 (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
462 ia64-hpux-tdep.h, solib-ia64-hpux.h.
463 (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
464 ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
465 * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
467 * config/ia64/hpux.mh: Remove file.
468 * config/pa/hpux.mh: Remove file.
469 * configure: Rebuilt.
470 * configure.ac (dlgetmodinfo, somread.o): Remove.
471 * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
472 (ia64-*-hpux*): Remove its float format exception.
473 * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
474 * hppa-hpux-nat.c: Remove file.
475 * hppa-hpux-tdep.c: Remove file.
476 * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
477 Move them here from hppa-tdep.h
478 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
479 (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
480 * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
481 Move them to hppa-tdep.c.
482 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
484 * ia64-hpux-nat.c: Remove file.
485 * ia64-hpux-tdep.c: Remove file.
486 * ia64-hpux-tdep.h: Remove file.
487 * inf-ttrace.c: Remove file.
488 * inf-ttrace.h: Remove file.
489 * solib-ia64-hpux.c: Remove file.
490 * solib-ia64-hpux.h: Remove file.
491 * solib-pa64.c: Remove file.
492 * solib-pa64.h: Remove file.
493 * solib-som.c: Remove file.
494 * solib-som.h: Remove file.
495 * somread.c: Remove file.
497 2015-03-13 John Baldwin <jhb@FreeBSD.org>
499 * configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
500 * config.in: Regenerate.
501 * configure: Regenerate.
502 * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
504 (fbsd_find_memory_regions): Use kinfo_getvmmap to
505 enumerate memory regions if present.
507 2015-03-13 John Baldwin <jhb@FreeBSD.org>
509 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
510 * i386fbsd-tdep.c: Fix style in various gdb_static_assert
512 (i386fbsd_sigtramp_p): Likewise.
514 2015-03-12 John Baldwin <jhb@FreeBSD.org>
516 * MAINTAINERS (Write After Approval): Add John Baldwin.
518 2015-03-12 Gary Benson <gbenson@redhat.com>
520 * solib.c (_initialize_solib): Make "set/show sysroot" use
521 add_setshow_optional_filename_cmd so it can be restored to
522 empty after being set.
524 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
526 * Makefile.in (SFILES): New source break-catch-syscall.c.
527 (COMMON_OBS): New object break-catch-syscall.o.
528 * break-catch-syscall.c: New file.
529 * breakpoint.c: Remove inclusion of "xml-syscall.h".
530 (syscall_catchpoint_p): Move declaration to break-catch-syscall.c
531 (struct syscall_catchpoint): Likewise.
532 (dtor_catch_syscall): Likewise.
533 (catch_syscall_inferior_data): Likewise.
534 (struct catch_syscall_inferior_data): Likewise.
535 (get_catch_syscall_inferior_data): Likewise.
536 (catch_syscall_inferior_data_cleanup): Likewise.
537 (insert_catch_syscall): Likewise.
538 (remove_catch_syscall): Likewise.
539 (breakpoint_hit_catch_syscall): Likewise.
540 (print_it_catch_syscall): Likewise.
541 (print_one_catch_syscall): Likewise.
542 (print_mention_catch_syscall): Likewise.
543 (print_recreate_catch_syscall): Likewise.
544 (catch_syscall_breakpoint_ops): Likewise.
545 (syscall_catchpoint_p): Likewise.
546 (create_syscall_event_catchpoint): Likewise.
547 (catch_syscall_split_args): Likewise.
548 (catch_syscall_command_1): Likewise.
549 (is_syscall_catchpoint_enabled): Likewise.
550 (catch_syscall_enabled): Likewise.
551 (catching_syscall_number): Likewise.
552 (catch_syscall_completer): Likewise.
553 (clear_syscall_counts): Likewise.
554 (initialize_breakpoint_ops): Move initialization of syscall
555 catchpoints to break-catch-syscall.c.
556 (_initialize_breakpoint): Move code related to syscall catchpoints
557 to break-catch-syscall.c.
559 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
561 * breakpoint.c (breakpoint_find_if): New function.
562 * breakpoint.h (breakpoint_find_if): New prototype.
564 2015-03-11 Gary Benson <gbenson@redhat.com>
566 * remote-fileio.h (remote_fileio_to_host_stat): New declaration.
567 * remote-fileio.c (remote_fileio_to_host_uint): New function.
568 (remote_fileio_to_host_ulong): Likewise.
569 (remote_fileio_to_host_mode): Likewise.
570 (remote_fileio_to_host_time): Likewise.
571 (remote_fileio_to_host_stat): Likewise.
572 * remote.c (PACKET_vFile_fstat): New enum value.
573 (remote_protocol_features): Register the "vFile:fstat" feature.
574 (remote_hostio_fstat): New function.
575 (remote_bfd_iovec_stat): Use the above.
576 (_initialize_remote): Register new "set/show remote
577 hostio-fstat-packet" command.
578 * symfile.c (separate_debug_file_exists): Update comment.
579 * NEWS: Announce new vFile:fstat packet.
581 2015-03-11 Gary Benson <gbenson@redhat.com>
583 * common/common-remote-fileio.h: New file.
584 * common/common-remote-fileio.c: Likewise.
585 * Makefile.in (SFILES): Add common/common-remote-fileio.c.
586 (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
587 (COMMON_OBS): Add common-remote-fileio.o.
588 (common-remote-fileio.o): New rule.
589 * remote-fileio.h (common-remote-fileio.h): New include.
590 * remote-fileio.c (gdb/fileio.h): Do not include.
591 (remote_fileio_to_be): Moved to common-remote-fileio.h.
592 (remote_fileio_to_fio_uint): Likewise.
593 (remote_fileio_to_fio_time): Likewise.
594 (remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
595 (remote_fileio_to_fio_mode): Likewise.
596 (remote_fileio_to_fio_ulong): Likewise.
597 (remote_fileio_to_fio_stat): Likewise.
599 2015-03-11 Andy Wingo <wingo@igalia.com>
601 * guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
602 we were checking the cached type, not the cached dynamic type.
604 2015-03-11 Andy Wingo <wingo@igalia.com>
606 * guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
607 other strings, as these are on the GC'd heap, and will be
608 collected along with the smob.
610 2015-03-11 Andy Wingo <wingo@igalia.com>
612 * guile/scm-objfile.c (gdbscm_objfile_progspace): New function.
613 (objfile_functions): Bind gdbscm_objfile_progspace to
615 * guile/lib/gdb.scm: Add objfile-progspace to exports.
617 2015-03-11 Andy Wingo <wingo@igalia.com>
619 * guile/guile.c (_initialize_guile): Disable automatic
620 finalization, if Guile offers us that possibility.
621 * guile/guile.c (call_initialize_gdb_module):
622 * guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
623 finalizers in appropriate places.
624 * configure.ac (AC_TRY_LIBGUILE): Add a check for
625 scm_set_automatic_finalization_enabled.
626 * configure: Regenerated.
628 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
630 * s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
633 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
635 * s390-linux-nat.c (struct arch_lwp_info): New.
636 (s390_fix_watch_points): Rename to...
637 (s390_prepare_to_resume): ...this. Skip the PER info update
638 unless the watch points have changed.
639 (s390_refresh_per_info, s390_new_thread): New functions.
640 (s390_insert_watchpoint): Call s390_refresh_per_info instead of
641 s390_fix_watch_points.
642 (s390_remove_watchpoint): Likewise.
643 (_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
644 Register s390_prepare_to_resume.
646 2015-03-09 Pedro Alves <palves@redhat.com>
649 2015-03-07 Pedro Alves <palves@redhat.com>
650 * common/gdb_socket.h: New file.
651 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
653 (net_open): Use union gdb_sockaddr_u.
655 2015-03-07 Pedro Alves <palves@redhat.com>
657 * configure.ac (build_warnings): Move -Wmissing-prototypes
658 -Wdeclaration-after-statement -Wmissing-parameter-type
659 -Wold-style-declaration -Wold-style-definition to the C-specific
661 * configure: Regenerate.
663 2015-03-07 Pedro Alves <palves@redhat.com>
665 * common/gdb_socket.h: New file.
666 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
668 (net_open): Use union gdb_sockaddr_u.
670 2015-03-07 Pedro Alves <palves@redhat.com>
672 * common/common-exceptions.c [!__cplusplus] (enum catcher_state)
673 (exceptions_state_mc_action_iter)
674 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
676 [__cplusplus] (try_scope_depth): New global.
677 [__cplusplus] (exception_try_scope_entry)
678 (exception_try_scope_exit, gdb_exception_sliced_copy)
679 (exception_rethrow): New functions.
680 (throw_exception): In C++ mode, throw
681 gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
682 gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
683 (throw_it): In C++ mode, use try_scope_depth.
684 * common/common-exceptions.h [!__cplusplus]
685 (exceptions_state_mc_action_iter)
686 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
688 [__cplusplus] (exception_try_scope_entry)
689 (exception_try_scope_exit, exception_rethrow): Declare.
690 [__cplusplus] (struct exception_try_scope): New struct.
691 [__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
693 (struct gdb_exception_RETURN_MASK_ALL)
694 (struct gdb_exception_RETURN_MASK_ERROR)
695 (struct gdb_exception_RETURN_MASK_QUIT): New types.
697 2015-03-07 Pedro Alves <palves@redhat.com>
699 * main.c (handle_command_errors): Remove volatile qualifier from
702 2015-03-07 Pedro Alves <palves@redhat.com>
704 * breakpoint.c (save_breakpoints): Adjust to avoid code between
706 * gdbtypes.c (safe_parse_type): Remove empty line.
707 (types_deeply_equal):
708 * guile/scm-frame.c (gdbscm_frame_name):
709 * linux-thread-db.c (find_new_threads_once):
710 * python/py-breakpoint.c (bppy_get_commands):
711 * record-btrace.c (record_btrace_insert_breakpoint)
712 (record_btrace_remove_breakpoint, record_btrace_start_replaying)
713 (record_btrace_start_replaying): Adjust to avoid code between TRY
716 2015-03-07 Pedro Alves <palves@redhat.com>
718 * common/common-exceptions.c (struct catcher) <exception>: No
719 longer a pointer to volatile exception. Now an exception value.
720 <mask>: Delete field.
721 (exceptions_state_mc_init): Remove all parameters. Adjust.
722 (exceptions_state_mc): No longer pop the catcher here.
723 (exceptions_state_mc_catch): New function.
724 (throw_exception): Adjust.
725 * common/common-exceptions.h (exceptions_state_mc_init): Remove
727 (exceptions_state_mc_catch): Declare.
728 (TRY_CATCH): Rename to ...
729 (TRY): ... this. Remove EXCEPTION and MASK parameters.
730 (CATCH, END_CATCH): New.
731 All callers adjusted.
733 2015-03-07 Tom Tromey <tromey@redhat.com>
735 * top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX.
737 2015-03-07 Pedro Alves <palves@redhat.com>
739 * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
740 (amd64_epilogue_frame_cache): Normal exception handling code.
741 * break-catch-throw.c (check_status_exception_catchpoint)
742 (re_set_exception_catchpoint): Ditto.
743 * cli/cli-interp.c (safe_execute_command):
744 * cli/cli-script.c (script_from_file): Ditto.
745 * compile/compile-c-symbols.c (generate_c_for_for_one_variable):
747 * compile/compile-object-run.c (compile_object_run): Ditto.
748 * cp-abi.c (baseclass_offset): Ditto.
749 * cp-valprint.c (cp_print_value): Ditto.
750 * exceptions.c (catch_exceptions_with_msg):
751 * frame-unwind.c (frame_unwind_try_unwinder): Ditto.
752 * frame.c (get_frame_address_in_block_if_available): Ditto.
753 * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
754 (i386_sigtramp_frame_cache): Ditto.
755 * infcmd.c (post_create_inferior): Ditto.
756 * linespec.c (parse_linespec, find_linespec_symbols):
757 * p-valprint.c (pascal_object_print_value): Ditto.
758 * parse.c (parse_expression_for_completion): Ditto.
759 * python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
760 * remote.c (remote_get_noisy_reply): Ditto.
761 * s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
762 * solib-svr4.c (solib_svr4_r_map): Ditto.
764 2015-03-06 Gary Benson <gbenson@redhat.com>
766 * common/common-utils.h (startswith): New inline function.
767 All places where this logic was used updated to use the above.
769 2015-03-05 Pedro Alves <palves@redhat.com>
772 * mem-break.c (default_memory_insert_breakpoint): Set shadow_len
773 after reading the breakpoint's shadow memory.
775 2015-03-05 Mark Kettenis <kettenis@gnu.org>
777 * hppabsd-nat.c: Remove file.
778 * hppaobsd-nat.c: New file.
779 * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c. Add
781 * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
784 2015-03-04 Pedro Alves <palves@redhat.com>
786 * target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
787 (target_decr_pc_after_break): Delete declaration.
788 * target.c (default_target_decr_pc_after_break)
789 (target_decr_pc_after_break): Delete.
790 * linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
791 gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
792 * linux-thread-db.c (check_event): Likewise.
793 * infrun.c (adjust_pc_after_break): Likewise.
794 * darwin-nat.c (cancel_breakpoint): Likewise.
795 * aix-thread.c (aix_thread_wait): Likewise.
796 * target-delegates.c: Regenerate.
798 2015-03-04 Pedro Alves <palves@redhat.com>
800 * linux-nat.c (save_sigtrap): Check for breakpoints before
801 checking watchpoints.
802 (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a
803 breakpoint is inserted if relying on SIGTRAP's siginfo.si_code.
804 (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether
805 a breakpoint triggered based on the SIGTRAP's siginfo.si_code.
806 (linux_nat_stopped_by_sw_breakpoint)
807 (linux_nat_supports_stopped_by_sw_breakpoint)
808 (linux_nat_stopped_by_hw_breakpoint)
809 (linux_nat_supports_stopped_by_hw_breakpoint): New functions.
810 (linux_nat_wait_1): Don't re-increment the PC if relying on
811 SIGTRAP's siginfo->si_code.
812 (linux_nat_add_target): Install new target methods.
813 * linux-thread-db.c (check_event): Don't account for breakpoint PC
814 offset if the target already adjusted the PC.
815 * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New.
816 (GDB_ARCH_TRAP_BRKPT): New.
817 (TRAP_HWBKPT): Define if not already defined.
819 2015-03-04 Pedro Alves <palves@redhat.com>
821 * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
822 * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
824 <stop_reason>: New field.
825 (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
826 (packet_set_cmd_state): New function.
827 (remote_protocol_features): Register the "swbreak" and "hwbreak"
829 (remote_query_supported): If not disabled with the corresponding
830 "set remote foo-packet" command, report support for the swbreak
831 and hwbreak features.
832 (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
834 <stop_reason>: New field.
835 (remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
836 (remote_wait_as): Adjust.
837 (remote_stopped_by_sw_breakpoint)
838 (remote_supports_stopped_by_sw_breakpoint)
839 (remote_stopped_by_hw_breakpoint)
840 (remote_supports_stopped_by_hw_breakpoint): New functions.
841 (remote_stopped_by_watchpoint): New function.
842 (init_remote_ops): Install them.
843 (_initialize_remote): Register new "set/show remote
844 swbreak-feature-packet" and "set/show remote
845 swbreak-feature-packet" commands.
847 2015-03-04 Pedro Alves <palves@redhat.com>
849 * btrace.h: Include target/waitstatus.h.
850 (struct btrace_thread_info) <stop_reason>: New field.
851 * record-btrace.c (record_btrace_step_thread): Use
852 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
853 (record_btrace_decr_pc_after_break): Delete.
854 (record_btrace_stopped_by_sw_breakpoint)
855 (record_btrace_supports_stopped_by_sw_breakpoint)
856 (record_btrace_stopped_by_hw_breakpoint)
857 (record_btrace_supports_stopped_by_hw_breakpoint): New functions.
858 (init_record_btrace_ops): Install them.
859 * record-full.c (record_full_hw_watchpoint): Delete and replace
861 (record_full_stop_reason): ... this throughout.
862 (record_full_exec_insn): Adjust.
863 (record_full_wait_1): Adjust. No longer re-increment the PC.
864 (record_full_wait_1): Adjust. Use
865 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
866 (record_full_stopped_by_watchpoint): Adjust.
867 (record_full_stopped_by_sw_breakpoint)
868 (record_full_supports_stopped_by_sw_breakpoint)
869 (record_full_supports_stopped_by_sw_breakpoint)
870 (record_full_stopped_by_hw_breakpoint)
871 (record_full_supports_stopped_by_hw_breakpoint): New functions.
872 (init_record_full_ops, init_record_full_core_ops): Install them.
873 * record.c (record_check_stopped_by_breakpoint): New function.
874 * record.h: Include target/waitstatus.h.
875 (record_check_stopped_by_breakpoint): New declaration.
877 2015-03-04 Pedro Alves <palves@redhat.com>
879 enum lwp_stop_reason -> enum target_stop_reason
880 * linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint)
881 (linux_nat_stopped_by_watchpoint, status_callback)
882 (linux_nat_wait_1): Adjust.
883 * linux-nat.h (enum lwp_stop_reason): Delete.
884 (struct lwp_info) <stop_reason>: Now an enum target_stop_reason.
885 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
886 * target/waitstatus.h (enum target_stop_reason): New.
888 2015-03-04 Pedro Alves <palves@redhat.com>
890 * breakpoint.c (need_moribund_for_location_type): New function.
891 (bpstat_stop_status): Don't skipping checking moribund locations
892 of breakpoint types which the target tell caused a stop.
893 (program_breakpoint_here_p): New function, factored out from ...
894 (bp_loc_is_permanent): ... this.
895 (update_global_location_list): Don't create a moribund location if
896 the target supports reporting stops of the type of the removed
898 * breakpoint.h (program_breakpoint_here_p): New declaration.
899 * infrun.c (adjust_pc_after_break): Return early if the target has
900 already adjusted the PC. Add comments.
901 (handle_signal_stop): If nothing explains a signal, and the target
902 tells us the stop was caused by a software breakpoint, check if
903 there's a breakpoint instruction in the memory. If so, adjust the
904 PC before presenting the stop to the user. Otherwise, ignore the
905 trap. If nothing explains a signal, and the target tells us the
906 stop was caused by a hardware breakpoint, ignore the trap.
907 * target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
908 to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
909 to_supports_stopped_by_hw_breakpoint>: New fields.
910 (target_stopped_by_sw_breakpoint)
911 (target_supports_stopped_by_sw_breakpoint)
912 (target_stopped_by_hw_breakpoint)
913 (target_supports_stopped_by_hw_breakpoint): Define.
914 * target-delegates.c: Regenerate.
916 2015-03-04 Pedro Alves <palves@redhat.com>
918 * infrun.c (follow_fork_inferior): Use the whole of the
919 inferior_ptid and pending_follow.related_pid ptids instead of
920 building ptids from the process components. Adjust verbose output
921 to use target_pid_to_str.
922 * linux-nat.c (linux_child_follow_fork): Use the whole of the
923 inferior_ptid and pending_follow.related_pid ptids instead of
924 building ptids from the process components.
926 2015-03-04 Mark Kettenis <kettenis@gnu.org>
928 * inf-ptrace.c [PT_GET_PROCESS_STATE]
929 (inf_ptrace_insert_fork_catchpoint): New function.
930 (inf_ptrace_remove_fork_catchpoint): New function.
931 (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.
933 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
935 * s390-linux-tdep.c (s390_register_name): Return empty string
936 instead of NULL for registers that shouldn't be visible.
938 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
940 * s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
941 XML file for 64-bit targets.
943 2015-03-03 Simon Marchi <simon.marchi@ericsson.com>
945 * target.h (find_default_create_inferior): Remove declaration.
946 (find_default_attach): Likewise.
948 2015-03-03 Pedro Alves <palves@redhat.com>
950 * inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
951 Use ptid_get_pid to get the overall process id when resuming all
954 2015-03-03 Pedro Alves <palves@redhat.com>
956 * i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
957 the lwp field of ptid. Pass the full ptid to get_thread_regcache.
958 * inf-ptrace.c (get_ptrace_pid): New function.
959 (inf_ptrace_resume): Use it.
960 * linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
963 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
965 * nat/linux-btrace.c: Include sys/utsname.h.
966 (linux_determine_kernel_ptr_bits): New.
967 (linux_enable_bts): Call linux_determine_kernel_ptr_bits.
968 * x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
971 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
973 * btrace.c (ftrace_update_function): Treat return as tailcall for
974 "_dl_runtime_resolve".
976 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
978 * btrace.h (btrace_function) <lbegin, lend>: Remove.
979 * btrace.c (ftrace_debug): Do not print the line range.
980 (ftrace_skip_file, ftrace_update_lines): Remove.
981 (ftrace_new_function): Remove lbegin and lend initialization.
982 (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
983 * record-btrace.c (btrace_compute_src_line_range): New.
984 (btrace_call_history_src_line): Call btrace_compute_src_line_range.
986 2015-03-02 Pedro Alves <palves@redhat.com>
988 * infrun.c (follow_exec): Delete all threads of the process except
989 the event thread. Extended comments.
991 2015-03-02 Joel Brobecker <brobecker@adacore.com>
993 * contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".
995 2015-03-02 Joel Brobecker <brobecker@adacore.com>
997 * utils.h: Remove <stdbool.h> #include.
998 (producer_is_gcc): Change return type to "int".
999 * utils.c (producer_is_gcc): Change return type to int.
1000 Return 1 instead of true, and 0 instead of false.
1001 Adjust function documentation accordingly.
1003 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
1005 * s390-linux-nat.c (have_regset_vxrs): New static variable.
1006 (s390_linux_fetch_inferior_registers): Handle vector registers, if
1008 (s390_linux_store_inferior_registers): Likewise.
1009 (s390_get_hwcap): Remove function. Embed its logic...
1010 (s390_read_description): ...here. Yield a target description with
1011 vector registers if applicable.
1012 * s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
1013 "features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
1014 "features/s390x-tevx-linux64.c".
1015 (struct gdbarch_tdep) <v0_full_regnum>: New field.
1016 (s390_dwarf_regmap): Add vector registers. Remove bogus entries
1017 for "GNU/Linux-specific registers".
1018 (s390_dwarf_reg_r0l): New enum value.
1019 (s390_dwarf_reg_to_regnum): Support vector registers.
1020 (s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
1021 of GPR lower halves.
1022 (regnum_is_vxr_full): New function.
1023 (s390_register_name): New function.
1024 (s390_pseudo_register_name): Handle v0-v15, which are composed of
1025 f0-f15 and v0l-v15l.
1026 (s390_pseudo_register_type): Likewise.
1027 (s390_pseudo_register_read): Likewise.
1028 (s390_pseudo_register_write): Likewise.
1029 (s390_value_from_register): Account for the fact that values are
1030 placed left-justified in vector registers.
1031 (s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
1032 the vector reggroup and omit them from the general reggroup.
1033 (s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
1034 (s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
1035 (s390_iterate_over_regset_sections): Add iterations for the two
1037 (s390_core_read_description): Yield a target description with
1038 vector registers if applicable.
1039 (s390_gdbarch_init): Handle target descriptions with vector
1040 registers. Add "register_name" gdbarch method.
1041 (_initialize_s390_tdep): Call new tdesc initialization functions.
1042 * s390-linux-tdep.h (HWCAP_S390_VX): New macro.
1043 (S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
1044 (S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
1045 (S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
1046 (S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
1047 (S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
1048 (S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
1049 (S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
1050 (S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
1051 (S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
1052 (S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
1053 (S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
1054 (S390_V30_REGNUM, S390_V31_REGNUM): New macros.
1055 (S390_NUM_REGS): Adjust value.
1056 (s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
1057 (tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
1058 (tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
1059 * NEWS: Announce S/390 vector register support.
1061 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
1063 * features/s390-tevx-linux64.xml: New file.
1064 * features/s390-vx-linux64.xml: New file.
1065 * features/s390-vx.xml: New file.
1066 * features/s390x-tevx-linux64.xml: New file.
1067 * features/s390x-vx-linux64.xml: New file.
1068 * features/Makefile (WHICH): Add s390-vx-linux64,
1069 s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
1070 (s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
1071 (s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
1073 * features/s390-tevx-linux64.c: New generated file.
1074 * features/s390-vx-linux64.c: Likewise.
1075 * features/s390x-tevx-linux64.c: Likewise.
1076 * features/s390x-vx-linux64.c: Likewise.
1077 * regformats/s390-tevx-linux64.dat: Likewise.
1078 * regformats/s390-vx-linux64.dat: Likewise.
1079 * regformats/s390x-tevx-linux64.dat: Likewise.
1080 * regformats/s390x-vx-linux64.dat: Likewise.
1082 2015-02-28 Doug Evans <xdje42@gmail.com>
1084 * symtab.h (struct symtab) <next>: Fix comment.
1086 2015-02-27 Simon Marchi <simon.marchi@ericsson.com>
1088 * python/python.c (python_GdbModuleDef): Rename GdbMethods to
1091 2015-02-27 Pedro Alves <palves@redhat.com>
1093 * dtrace-probe.c (dtrace_probe_ops): Make extern.
1095 2015-02-27 Pedro Alves <palves@redhat.com>
1097 * common/common-exceptions.h (exception_none): Declare.
1098 * common/common-exceptions.c (exception_none): Moved from
1100 (exceptions_state_mc_init): Use exception_none.
1101 * exceptions.c (exception_none): Move to
1102 common/common-exceptions.c.
1103 * exceptions.h (exception_none): Move to
1104 common/common-exceptions.h.
1106 2015-02-27 Pedro Alves <palves@redhat.com>
1108 * main.c (catch_command_errors, catch_command_errors_const):
1109 Remove 'mask' argument. Adjust.
1110 (captured_main): Adjust callers.
1112 2015-02-27 Pedro Alves <palves@redhat.com>
1114 * python/python-internal.h: Include "extension-priv.h".
1116 2015-02-27 Pedro Alves <palves@redhat.com>
1118 * breakpoint.h (enum print_stop_action): Move further up in the
1121 2015-02-27 Pedro Alves <palves@redhat.com>
1123 * gdbarch.sh: Include regcache.h.
1124 * gdbarch.h: Regenerate.
1126 2015-02-27 Pedro Alves <palves@redhat.com>
1128 * arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>:
1129 Remove duplicate const.
1130 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove
1133 2015-02-27 Pedro Alves <palves@redhat.com>
1135 * cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST.
1136 * guile/guile.c (extension_language_guile): Use EXPORTED_CONST.
1137 * features/feature_to_c.sh: Tag the generated xml_builtin array
1138 with extern const in C++ mode.
1140 2015-02-27 Tom Tromey <tromey@redhat.com>
1142 * minidebug.c (struct lzma_stream): Rename to ...
1143 (struct gdb_lzma_stream): ... this.
1144 (lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust.
1146 2015-02-27 Pedro Alves <palves@redhat.com>
1148 * mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New
1150 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args)
1151 (mi_cmd_stack_list_variables): Use it.
1153 2015-02-27 Pedro Alves <palves@redhat.com>
1155 * x86-linux-nat.c (u_debugreg_offset): New function.
1156 (x86_linux_dr_get, x86_linux_dr_set): Use it.
1158 2015-02-27 Pedro Alves <palves@redhat.com>
1160 * nat/x86-dregs.h (enum target_hw_bp_type): Remove forward
1162 Include break-common.h.
1164 2015-02-27 Tom Tromey <tromey@redhat.com>
1165 Pedro Alves <palves@redhat.com>
1167 * arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
1168 local used to iterate over enums.
1169 * completer.c (signal_completer): Likewise.
1170 * i386-tdep.c (i386_stap_parse_special_token): Likewise.
1171 * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
1172 * tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
1173 * tui/tui-layout.c (next_layout, prev_layout): Likewise.
1174 * tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
1175 (tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
1176 * tui-wingeneral.c (tui_refresh_all): Likewise.
1178 2015-02-27 Pedro Alves <palves@redhat.com>
1180 * target.h: Include "infrun.h".
1182 2015-02-27 Pedro Alves <palves@redhat.com>
1184 * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
1186 2015-02-27 Pedro Alves <palves@redhat.com>
1188 * common/agent.h (IPA_SYM_EXPORTED_NAME): New.
1190 * common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.
1192 2015-02-27 Pedro Alves <palves@redhat.com>
1194 * cli-out.c (_rl_erase_entire_line): Move declaration out of
1195 cli_mld_erase_entire_line, and make it extern "C".
1196 * common/common-defs.h (EXTERN_C): New.
1197 * completer.c (_rl_completion_prefix_display_length)
1198 (_rl_print_completions_horizontally, QSFUNC): Move declarations
1199 out of gdb_display_match_list_1.
1200 (_rl_qsort_string_compare): Move declaration out of
1201 gdb_display_match_list_1, and make it extern "C".
1202 * defs.h (re_comp): Use EXTERN_C.
1203 * maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
1204 and make it extern "C".
1205 (monstartup): Move declaration out of maintenance_set_profile_cmd,
1206 and make it extern "C".
1207 (main): Move declaration out of maintenance_set_profile_cmd.
1208 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
1211 2015-02-27 Pedro Alves <palves@redhat.com>
1213 * python/python.c (GdbMethods): Rename to ...
1214 (python_GdbMethods): ... this and make extern.
1215 (GdbModuleDef): Rename to ...
1216 (python_GdbModuleDef): ... this and make extern.
1218 2015-02-27 Pedro Alves <palves@redhat.com>
1220 * record-btrace.c (set_record_btrace_cmdlist)
1221 (show_record_btrace_cmdlist): Remove redefinitions.
1223 2015-02-27 Tom Tromey <tromey@redhat.com>
1224 Pedro Alves <palves@redhat.com>
1226 * dwarf2-frame.c (enum cfa_how_kind, struct
1227 dwarf2_frame_state_reg_info): Move out of struct
1229 * dwarf2read.c (struct tu_stats): Move out of struct
1231 (struct file_entry): Move out of struct line_header.
1232 (struct nextfield, struct nextfnfield, struct fnfieldlist, struct
1233 typedef_field_list): Move out of struct field_info.
1234 * gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
1235 Move out of struct dynamic_prop.
1236 (union type_owner, union field_location, struct field, struct
1237 range_bounds, union type_specific): Move out of struct main_type.
1238 (struct fn_fieldlist, struct fn_field, struct typedef_field)
1239 (VOFFSET_STATIC): Move out of struct cplus_struct_type.
1240 (struct call_site_target, union call_site_parameter_u, struct
1241 call_site_parameter): Move out of struct call_site.
1242 * m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
1244 (enum srcdest_kind): Move out of struct srcdest.
1245 * main.c (enum cmdarg_kind): Move out of struct cmdarg.
1246 * prologue-value.h (enum prologue_value_kind): Move out of struct
1248 * s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
1250 * stabsread.c (struct nextfield, struct next_fnfieldlist): Move
1251 out of struct field_info.
1252 * symfile.h (struct other_sections): Move out of struct
1254 * symtab.c (struct symbol_cache_slot): Move out struct
1256 * target-descriptions.c (enum tdesc_type_kind): Move out of
1257 typedef struct tdesc_type.
1258 * tui/tui-data.h (enum tui_line_or_address_kind): Move out of
1259 struct tui_line_or_address.
1260 * value.c (enum internalvar_kind, union internalvar_data): Move
1261 out of struct internalvar.
1262 * xtensa-tdep.h (struct ctype_cache): Move out of struct
1265 2015-02-27 Tom Tromey <tromey@redhat.com>
1266 Pedro Alves <palves@redhat.com>
1268 Rename symbols whose names are reserved C++ keywords throughout.
1270 2015-02-27 Pedro Alves <palves@redhat.com>
1272 * Makefile.in (COMPILER): New, get it from autoconf.
1273 (COMPILE.pre, CC_LD): Use COMPILER.
1274 (CXX): Get from autoconf instead.
1275 (CXX_FOR_TARGET): Default to g++ instead of gcc.
1276 * acinclude.m4: Include build-with-cxx.m4.
1277 * build-with-cxx.m4: New file.
1278 * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
1279 Disable -Werror by default if building in C++ mode.
1280 (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
1281 -Wno-narrowing in C++ mode. Only enable -Wpointer-sign in C mode.
1282 Run supported-warning-flags tests with the C++ compiler.
1283 Save/restore CXXFLAGS too.
1284 * configure: Regenerate.
1286 2015-02-27 Pedro Alves <palves@redhat.com>
1288 * libiberty.m4: New file.
1289 * acinclude.m4: Include libiberty.m4.
1290 * configure.ac: Call libiberty_INIT.
1291 * config.in, configure: Regenerate.
1293 2015-02-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
1295 * s390-linux-tdep.c (s390_gcc_target_options): Not just handle
1296 31-bit targets, but 64-bit targets as well.
1297 (s390_gnu_triplet_regexp): New function.
1298 (s390_gdbarch_init): Set the gcc_target_options gdbarch method for
1299 64-bit targets as well. Set the gnu_triplet_regexp gdbarch
1302 2015-02-27 Jon TURNEY <jon.turney@dronecode.org.uk> (tiny patch)
1304 * windows-nat.c (CONTEXT_DEBUGGER): Remove.
1305 (CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS. Incorporate flags
1306 from CONTEXT_DEBUGGER.
1308 2015-02-26 Doug Evans <dje@google.com>
1310 * gdbtypes.c (internal_type_vptr_fieldno): Add missing call to
1312 (set_type_vptr_fieldno): Ditto.
1313 (internal_type_vptr_basetype, set_type_vptr_basetype): Ditto.
1314 * gnu-v3-abi.c (gnuv3_dynamic_class): Ditto.
1316 2015-02-26 Pedro Alves <palves@redhat.com>
1318 * auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
1319 * complaints.c (vcomplaint): Pass argument FMT directly to
1320 printf-like functions instead of complaint->fmt.
1321 * ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
1322 * darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
1323 * compile/compile-loc2c.c (pushf, unary, binary): Add
1325 (do_compile_dwarf_expr_to_c): Pass string literal as format string
1327 (BINARY): Pass string literal as format string to 'binary'.
1328 * compile/compile-object-load.c (link_callbacks_einfo): Add
1330 * guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.
1332 2015-02-26 Pedro Alves <palves@redhat.com>
1334 * windows-termcap.c: Rename to ...
1335 * stub-termcap.c: ... this. Adjust header line.
1336 * Makefile.in (SFILES): Refer to stub-termcap.c instead of
1338 * configure: Regenerate.
1339 * configure.ac: Refer to stub-termcap.o instead of
1341 * gdb_curses.h: Mention stub-termcap.c instead of
1344 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
1346 * compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
1347 (gcc_symbol_address): Call gnu_ifunc_resolve_addr.
1349 2015-02-26 Antoine Tremblay <antoine.tremblay@ericsson.com>
1351 * gdb/infcmd.c (print_return_value): use type_to_string to print type.
1353 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
1355 * elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
1356 bfd_canonicalize_symtab.
1358 2015-02-25 John Baldwin <jhb@FreeBSD.org>
1360 * amd64fbsd-nat.c: Include sys/user.h.
1361 (_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
1362 instead of KERN_PS_STRINGS to locate the signal trampoline.
1363 * i386fbsd-nat.c: Include sys/user.h.
1364 (_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
1365 instead of KERN_PS_STRINGS to locate the signal trampoline.
1366 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New.
1367 (amd64fbsd_sigtramp_p): New.
1368 (amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No
1369 longer set default values.
1370 (amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p".
1371 * i386fbsd-tdep.c (i386fbsd_sigtramp_start)
1372 (i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end)
1373 (i386fbsd_freebsd4_sigtramp_start)
1374 (i386fbsd_freebsd4_sigtramp_middle)
1375 (i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start)
1376 (i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New.
1377 (i386fbsd_sigtramp_p): New.
1378 (i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No
1379 longer set default values.
1380 (i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p".
1382 2015-02-25 John Baldwin <jhb@freebsd.org>
1384 * amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use
1385 get_frame_register instead of frame_unwind_register_unsigned.
1387 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
1390 * compile/compile-c-support.c (c_compute_program): Change // comment.
1391 * compile/compile-object-load.c (setup_sections): Change // comment.
1393 2015-02-26 Joel Brobecker <brobecker@adacore.com>
1396 * iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment.
1398 2015-02-23 Pedro Alves <palves@redhat.com>
1400 * remote.c (skip_to_semicolon): New function.
1401 (remote_parse_stop_reply) <T stop reply>: Use it. Don't
1402 special case the stop reasons that look like hex numbers
1403 upfront. Instead handle real register numbers after matching
1404 all the known stop reasons.
1406 2015-02-21 Doug Evans <dje@google.com>
1408 PR c++/17976, symtab/17821
1409 * cp-namespace.c (cp_search_static_and_baseclasses): New parameter
1410 is_in_anonymous. All callers updated.
1411 (find_symbol_in_baseclass): Ditto.
1412 (cp_lookup_nested_symbol_1): Ditto. Don't search all static blocks
1413 for symbols in an anonymous namespace.
1414 * dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
1415 DW_AT_name directly.
1416 (dwarf2_name): Convert missing namespace name to
1417 CP_ANONYMOUS_NAMESPACE_STR.
1419 2015-02-20 Pedro Alves <palves@redhat.com>
1421 * linux-nat.c (linux_handle_extended_wait): Call
1422 thread_db_notice_clone whenever a new clone LWP is detected.
1423 (linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
1425 * linux-nat.h (thread_db_attach_lwp): Delete declaration.
1426 (thread_db_notice_clone, linux_stop_and_wait_all_lwps)
1427 (linux_unstop_all_lwps): Declare.
1428 * linux-thread-db.c (struct thread_get_info_inout): Delete.
1429 (thread_get_info_callback): Delete.
1430 (thread_from_lwp): Use td_thr_get_info and record_thread.
1431 (thread_db_attach_lwp): Delete.
1432 (thread_db_notice_clone): New function.
1433 (try_thread_db_load_1): If /proc is mounted and shows the
1434 process'es task list, walk over all LWPs and call thread_from_lwp
1435 instead of relying on td_ta_thr_iter.
1436 (attach_thread): Don't call check_thread_signals here. Split the
1437 tail part of the function (which adds the thread to the core GDB
1439 (record_thread): ... this function. Call check_thread_signals
1441 (thread_db_wait): Don't call thread_db_find_new_threads_1. Always
1442 call thread_from_lwp.
1443 (thread_db_update_thread_list): Rename to ...
1444 (thread_db_update_thread_list_org): ... this.
1445 (thread_db_update_thread_list): New function.
1446 (thread_db_find_thread_from_tid): Delete.
1447 (thread_db_get_ada_task_ptid): Simplify.
1448 * nat/linux-procfs.c: Include <sys/stat.h>.
1449 (linux_proc_task_list_dir_exists): New function.
1450 * nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.
1452 2015-02-20 Pedro Alves <palves@redhat.com>
1454 * linux-nat.c (lin_lwp_attach_lwp): No longer special case the
1455 main LWP. Handle the case of waitpid returning 0 if we're already
1456 attached to the LWP. Don't set the LWP's last_resume_kind to
1457 resume_stop if we already knew about the LWP.
1458 (linux_nat_filter_event): Add debug logs.
1460 2015-02-20 Pedro Alves <palves@redhat.com>
1462 * target.h (forward_target_decr_pc_after_break): Delete
1465 2015-02-20 Pedro Alves <palves@redhat.com>
1468 * linux-thread-db.c (thread_get_info_callback): Return early if
1469 the thread's lwp id is -1.
1471 2015-02-20 Joel Brobecker <brobecker@adacore.com>
1475 2015-02-19 Steve Ellcey <sellcey@imgtec.com>
1477 * dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr.
1478 (dtrace_get_probes) Change type of variable 'dof'.
1480 2015-02-19 Antoine Tremblay <antoine.tremblay@ericsson.com>
1482 PR breakpoints/16812
1483 * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
1484 * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
1485 * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
1487 2015-02-19 David Taylor <dtaylor@emc.com>
1489 * common/ax.def (setv): Fix consumed entry in setv DEFOP.
1491 2015-02-18 Patrick Palka <patrick@parcs.ath.cx>
1493 * tui/tui-io.c (tui_handle_resize_during_io): Remove this
1495 (tui_putc): Don't call tui_handle_resize_during_io.
1496 (tui_getc): Likewise.
1497 (tui_mld_getc): Likewise.
1498 * tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
1499 (tui_sigwinch_token): New static variable.
1500 (tui_initialize_win): Adjust documentation. Set
1502 (tui_async_resize_screen): New asynchronous callback.
1503 (tui_sigwinch_handler): Adjust documentation. Asynchronously
1504 invoke tui_async_resize_screen.
1506 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
1508 * configure: Regenerated.
1509 * configure.ac: Use GDB_AC_TRANSFORM.
1510 * Makefile.in (aclocal_m4_deps): Added transform.m4.
1511 * acinclude.m4: sinclude transform.m4.
1512 * transform.m4: New file.
1513 (GDB_AC_TRANSFORM): New macro.
1515 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1517 * NEWS: Announce the support for DTrace SDT probes.
1519 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1521 * amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
1522 (amd64_dtrace_parse_probe_argument): New function.
1523 (amd64_dtrace_probe_is_enabled): Likewise.
1524 (amd64_dtrace_enable_probe): Likewise.
1525 (amd64_dtrace_disable_probe): Likewise.
1526 (amd64_linux_init_abi): Register the
1527 `gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
1528 `gdbarch_dtrace_disable_probe' and
1529 `gdbarch_dtrace_probe_is_enabled' hooks.
1530 (amd64_dtrace_disabled_probe_sequence_1): New constant.
1531 (amd64_dtrace_disabled_probe_sequence_2): Likewise.
1532 (amd64_dtrace_enable_probe_sequence): Likewise.
1533 (amd64_dtrace_disable_probe_sequence): Likewise.
1535 2015-01-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1537 * breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
1538 the -probe-dtrace new vpossible value for PROBE_MODIFIER.
1539 * configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
1541 * Makefile.in (SFILES): dtrace-probe.c added.
1542 * configure: Regenerate.
1543 * dtrace-probe.c: New file.
1544 (SHT_SUNW_dof): New constant.
1545 (dtrace_probe_type): New enum.
1546 (dtrace_probe_arg): New struct.
1547 (dtrace_probe_arg_s): New typedef.
1548 (struct dtrace_probe_enabler): New struct.
1549 (dtrace_probe_enabler_s): New typedef.
1550 (dtrace_probe): New struct.
1551 (dtrace_probe_is_linespec): New function.
1552 (dtrace_dof_sect_type): New enum.
1553 (dtrace_dof_dofh_ident): Likewise.
1554 (dtrace_dof_encoding): Likewise.
1555 (DTRACE_DOF_ENCODE_LSB): Likewise.
1556 (DTRACE_DOF_ENCODE_MSB): Likewise.
1557 (dtrace_dof_hdr): New struct.
1558 (dtrace_dof_sect): Likewise.
1559 (dtrace_dof_provider): Likewise.
1560 (dtrace_dof_probe): Likewise.
1561 (DOF_UINT): New macro.
1562 (DTRACE_DOF_PTR): Likewise.
1563 (DTRACE_DOF_SECT): Likewise.
1564 (dtrace_process_dof_probe): New function.
1565 (dtrace_process_dof): Likewise.
1566 (dtrace_build_arg_exprs): Likewise.
1567 (dtrace_get_arg): Likewise.
1568 (dtrace_get_probes): Likewise.
1569 (dtrace_get_probe_argument_count): Likewise.
1570 (dtrace_can_evaluate_probe_arguments): Likewise.
1571 (dtrace_evaluate_probe_argument): Likewise.
1572 (dtrace_compile_to_ax): Likewise.
1573 (dtrace_probe_destroy): Likewise.
1574 (dtrace_gen_info_probes_table_header): Likewise.
1575 (dtrace_gen_info_probes_table_values): Likewise.
1576 (dtrace_probe_is_enabled): Likewise.
1577 (dtrace_probe_ops): New variable.
1578 (info_probes_dtrace_command): New function.
1579 (_initialize_dtrace_probe): Likewise.
1580 (dtrace_type_name): Likewise.
1582 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1584 * gdbarch.sh (dtrace_parse_probe_argument): New.
1585 (dtrace_probe_is_enabled): Likewise.
1586 (dtrace_enable_probe): Likewise.
1587 (dtrace_disable_probe): Likewise.
1588 * gdbarch.c: Regenerate.
1589 * gdbarch.h: Regenerate.
1591 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1593 * stap-probe.c (stap_probe_ops): Add NULLs in the static
1594 stap_probe_ops for `enable_probe' and `disable_probe'.
1595 * probe.c (enable_probes_command): New function.
1596 (disable_probes_command): Likewise.
1597 (_initialize_probe): Define the cli commands `enable probe' and
1599 (parse_probe_linespec): New function.
1600 (info_probes_for_ops): Use parse_probe_linespec.
1601 * probe.h (probe_ops): New hooks `enable_probe' and
1604 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1606 * probe.c (compute_probe_arg): Moved from stap-probe.c
1607 (compile_probe_arg): Likewise.
1608 (probe_funcs): Likewise.
1609 * stap-probe.c (compute_probe_arg): Moved to probe.c.
1610 (compile_probe_arg): Likewise.
1611 (probe_funcs): Likewise.
1613 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1615 * probe.c (print_ui_out_not_applicables): New function.
1616 (exists_probe_with_pops): Likewise.
1617 (info_probes_for_ops): Do not include column headers for probe
1618 types for which no probe has been actually found on any object.
1619 Also invoke `print_ui_out_not_applicables' in order to match the
1620 column rows with the header when probes of several types are
1622 Print the "Type" column.
1623 * probe.h (probe_ops): Added a new probe operation `type_name'.
1624 * stap-probe.c (stap_probe_ops): Add `stap_type_name'.
1625 (stap_type_name): New function.
1627 2015-02-17 Patrick Palka <patrick@parcs.ath.cx>
1629 * tui/tui-io.c (tui_getc): Don't call key_is_command_char.
1630 (key_is_command_char): Delete.
1632 2015-02-17 Pedro Alves <palves@redhat.com>
1634 * tui/tui.c (tui_enable): Resize windows before anything
1635 might show a window.
1637 2015-02-17 Max Ostapenko <m.ostapenko@partner.samsung.com>
1640 * aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
1641 (aarch64_linux_read_description): Remove initialize_tdesc_aarch64
1643 * aarch64-tdep.h (tdesc_aarch64): Declare.
1645 2015-02-12 Mark Wielaard <mjw@redhat.com>
1647 * contrib/ari/gdb_ari.sh: Remove checks for "true" and "false".
1649 2015-02-13 Doug Evans <dje@google.com>
1651 * cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
1652 anonymous_namespace to is_in_anonymous for consistency with the rest
1654 (cp_lookup_bare_symbol): Fix typo in comment.
1655 (cp_search_static_and_baseclasses): Ditto.
1656 (search_symbol_list): Use vertical space in comment better.
1657 (reset_directive_searched): Ditto. Fix typo.
1658 (cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.
1660 2015-02-13 Yao Qi <yao.qi@arm.com>
1662 * MAINTAINERS: Update my email address.
1664 2015-02-12 Doug Evans <dje@google.com>
1666 * symtab.c (completion_list_add_name): Fix memory leak.
1668 2015-02-12 Doug Evans <dje@google.com>
1670 * completer.c (complete_line): Remove incorrect comment.
1672 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1674 * python/py-framefilter.c (py_print_single_arg, enumerate_locals)
1675 (py_print_frame): Use RETURN_MASK_ERROR.
1677 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1679 * python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
1680 function comment. Wrap all function that can throw in cleanups.
1681 (gdbpy_apply_frame_filter): Wrap all function that can throw in
1684 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1686 * python/py-framefilter.c (py_print_frame): Substitute goto error.
1687 Remove the error label.
1689 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1691 * python/py-framefilter.c (py_print_frame): Put conditional code paths
1692 with goto first, indent the former else codepath left. Put variable
1693 'elided' to a new inner block.
1695 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1697 * python/py-framefilter.c (py_print_frame): Whitespacing fixes.
1699 2015-02-11 Pedro Alves <palves@redhat.com>
1701 * xcoffread.c (within_function): Delete.
1703 2015-02-11 Tom Tromey <tromey@redhat.com>
1704 Pedro Alves <palves@redhat.com>
1706 * breakpoint.c (base_breakpoint_ops): Delete.
1707 * dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
1708 * elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
1709 * guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
1710 * ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
1711 * python/py-arch.c (arch_object_type): Make extern.
1712 * python/py-block.c (block_syms_iterator_object_type): Make extern.
1713 * python/py-bpevent.c (breakpoint_event_object_type): Make extern.
1714 * python/py-cmd.c (cmdpy_object_type): Make extern.
1715 * python/py-continueevent.c (continue_event_object_type)
1716 * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
1717 parameter. Update all callers.
1718 * python/py-evtregistry.c (eventregistry_object_type): Make extern.
1719 * python/py-exitedevent.c (exited_event_object_type): Make extern.
1720 * python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
1721 * python/py-function.c (fnpy_object_type): Make extern.
1722 * python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
1723 * python/py-infevents.c (call_pre_event_object_type)
1724 (inferior_call_post_event_object_type).
1725 (memory_changed_event_object_type): Make extern.
1726 * python/py-infthread.c (thread_object_type): Make extern.
1727 * python/py-lazy-string.c (lazy_string_object_type): Make extern.
1728 * python/py-linetable.c (linetable_entry_object_type)
1729 (linetable_object_type, ltpy_iterator_object_type): Make extern.
1730 * python/py-newobjfileevent.c (new_objfile_event_object_type)
1731 (clear_objfiles_event_object_type): Make extern.
1732 * python/py-objfile.c (objfile_object_type): Make extern.
1733 * python/py-param.c (parmpy_object_type): Make extern.
1734 * python/py-progspace.c (pspace_object_type): Make extern.
1735 * python/py-signalevent.c (signal_event_object_type): Make extern.
1736 * python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
1737 * python/py-type.c (type_object_type, field_object_type)
1738 (type_iterator_object_type): Make extern.
1739 * python/python.c (python_extension_script_ops)
1740 (python_extension_ops): Make extern.
1741 * stap-probe.c (stap_probe_ops): Make extern.
1743 2015-02-11 Pedro Alves <pedro@codesourcery.com>
1745 * infrun.c (adjust_pc_after_break): Don't adjust the PC just
1746 because the event thread is not the current thread.
1748 2015-02-11 Doug Evans <xdje42@gmail.com>
1750 * gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't
1751 been initialized yet, return NULL.
1753 2015-02-11 Doug Evans <dje@google.com>
1755 * symfile.h (new_symfile_objfile): Delete.
1756 * symfile.c (finish_new_objfile): Renamed from new_symfile_objfile.
1757 All callers updated.
1759 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
1761 * tui/tui-io.c (tui_handle_resize_during_io): Call
1762 tui_update_gdb_sizes() after resizing the screen.
1763 * tui/tui.c (tui_enable): Resize the terminal before
1764 calling tui_update_gdb_sizes().
1766 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
1768 * tui/tui-io.c (tui_getc): Move cursor to the end of the command
1769 line before printing a newline.
1771 2015-02-11 Mark Wielaard <mjw@redhat.com>
1773 * utils.c (producer_is_gcc): Return true or false.
1775 2015-02-10 Mark Wielaard <mjw@redhat.com>
1777 * utils.h (producer_is_gcc): Change return type to bool. Add major
1779 * utils.c (producer_is_gcc): Likewise.
1780 (producer_is_gcc_ge_4): Adjust producer_is_gcc call.
1781 * dwarf2read.c (check_producer): Likewise.
1783 2015-02-10 Pedro Alves <palves@redhat.com>
1785 * infrun.c (displaced_step_fixup): Switch to the event thread
1786 before calling gdbarch_displaced_step_fixup.
1788 2015-02-10 Antoine Tremblay <antoine.tremblay@ericsson.com>
1790 * MAINTAINERS (Write After Approval): Add Antoine Tremblay.
1792 2015-02-10 Simon Marchi <simon.marchi@ericsson.com>
1794 * ada-varobj.c (ada_name_of_child): Constify parent.
1795 (ada_path_expr_of_child): Same.
1796 (ada_value_of_child): Same.
1797 (ada_type_of_child): Same.
1798 * c-varobj.c (c_is_path_expr_parent): Same.
1799 (c_describe_child): Same.
1800 (c_name_of_child): Same.
1801 (c_value_of_child): Same.
1802 (c_type_of_child): Same.
1803 (cplus_number_of_children): Same.
1804 (cplus_describe_child): Constify var.
1805 (cplus_name_of_child): Constify parent.
1806 (cplus_value_of_child): Same.
1807 (cplus_type_of_child): Same.
1808 * jv-varobj.c (java_name_of_child): Same.
1809 (java_value_of_child): Same.
1810 (java_type_of_child): Same.
1811 * varobj.c (value_of_child): Same.
1812 (varobj_default_is_path_expr_parent): Constify var, parent and return
1814 (varobj_get_path_expr): Constify var, modify path_expr through
1816 (install_new_value): Constify parent.
1817 (value_of_child): Constify parent.
1818 * varobj.h (struct varobj): Constify parent.
1819 (struct lang_varobj_ops): Constify name_of_child, value_of_child and
1821 (varobj_get_path_expr): Constify var.
1822 (varobj_get_path_expr_parent): Constify var and return value.
1824 2015-02-10 Luis Machado <lgustavo@codesourcery.com>
1826 * arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
1827 (arm_prologue_this_id): Move PC and SP limit checks to
1828 arm_prologue_unwind_stop_reason.
1829 (arm_prologue_unwind) <stop_reason> : Set to
1830 arm_prologue_unwind_stop_reason.
1832 2015-02-09 Mark Wielaard <mjw@redhat.com>
1834 * dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
1835 DW_LANG_Fortran08 as language_fortran.
1837 2015-02-09 Sergio Durigan Junior <sergiodj@redhat.com>
1840 * gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
1841 of pointer against char.
1843 2015-02-09 Mark Wielaard <mjw@redhat.com>
1845 * c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'.
1846 (c_type_print_modifier): Likewise.
1847 * dwarf2read.c (read_tag_atomic_type): New function.
1848 (read_type_die_1): Handle DW_TAG_atomic_type.
1849 * gdbtypes.c (make_atomic_type): New function.
1850 (recursive_dump_type): Handle TYPE_ATOMIC.
1851 * gdbtypes.h (enum type_flag_values): Renumber.
1852 (enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC.
1853 (TYPE_ATOMIC): New macro.
1854 (make_atomic_type): Declare.
1856 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1858 * btrace.c (ftrace_find_call): Skip gaps.
1859 (ftrace_new_function): Initialize level.
1860 (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
1861 (ftrace_new_switch): Update
1863 (ftrace_new_gap): New.
1864 (ftrace_update_function): Create new function after gap.
1865 (btrace_compute_ftrace_bts): Create gap on error.
1866 (btrace_stitch_bts): Update parameters. Clear trace if it
1868 (btrace_stitch_trace): Update parameters. Update callers.
1869 (btrace_clear): Reset the number of gaps.
1870 (btrace_insn_get): Return NULL if the iterator points to a gap.
1871 (btrace_insn_number): Return zero if the iterator points to a gap.
1872 (btrace_insn_end): Allow gaps at the end.
1873 (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
1874 (btrace_find_insn_by_number): Assert that the found iterator does
1876 (btrace_call_next, btrace_call_prev): Assert that the last function
1878 * btrace.h (btrace_bts_error): New.
1879 (btrace_function): Update comment.
1880 (btrace_function) <insn, insn_offset, number>: Update comment.
1881 (btrace_function) <errcode>: New.
1882 (btrace_thread_info) <ngaps>: New.
1883 (btrace_thread_info) <replay>: Update comment.
1884 (btrace_insn_get): Update comment.
1885 * record-btrace.c (btrace_ui_out_decode_error): New.
1886 (record_btrace_info): Print number of gaps.
1887 (btrace_insn_history, btrace_call_history): Call
1888 btrace_ui_out_decode_error for gaps.
1889 (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
1891 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1893 * common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
1894 * nat/linux-btrace.c: (btrace_this_cpu): New.
1895 (cpu_supports_bts): Call btrace_this_cpu.
1896 (intel_supports_bts): Add cpu parameter.
1898 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1900 * btrace.h (btrace_insn_class): New.
1901 (btrace_insn) <size, iclass>: New.
1902 * btrace.c (ftrace_find_call): Update parameters. Update users.
1903 Use instruction classification.
1904 (ftrace_new_return): Update parameters. Update users.
1905 (ftrace_update_function): Update parameters. Update users. Use
1906 instruction classification.
1907 (ftrace_update_insns): Update parameters. Update users.
1908 (ftrace_classify_insn): New.
1909 (btrace_compute_ftrace_bts): Fill in new btrace_insn fields. Add
1910 TRY_CATCH around call to gdb_insn_length.
1912 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1914 * btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
1915 Update parameters. Update users.
1917 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1919 * btrace.c (parse_xml_btrace_conf_bts): Add size.
1920 (btrace_conf_bts_attributes): New.
1921 (btrace_conf_children): Add attributes.
1922 * common/btrace-common.h (btrace_config_bts): New.
1923 (btrace_config)<bts>: New.
1924 (btrace_config): Update comment.
1925 * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
1927 * features/btrace-conf.dtd: Increment version. Add size
1928 attribute to bts element.
1929 * record-btrace.c (set_record_btrace_bts_cmdlist,
1930 show_record_btrace_bts_cmdlist): New.
1931 (record_btrace_adjust_size, record_btrace_print_bts_conf,
1932 record_btrace_print_conf, cmd_set_record_btrace_bts,
1933 cmd_show_record_btrace_bts): New.
1934 (record_btrace_info): Call record_btrace_print_conf.
1935 (_initialize_record_btrace): Add commands.
1936 * remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
1937 (remote_protocol_features): Add Qbtrace-conf:bts:size packet.
1938 (btrace_sync_conf): Synchronize bts size.
1939 (_initialize_remote): Add Qbtrace-conf:bts:size packet.
1940 * NEWS: Announce new commands and new packets.
1942 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1944 * Makefile.in (XMLFILES): Add btrace-conf.dtd.
1945 * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
1946 (x86_linux_btrace_conf): New.
1947 (x86_linux_create_target): Initialize to_btrace_conf.
1948 * nat/linux-btrace.c (linux_enable_btrace): Update parameters.
1949 Check format. Split into this and ...
1950 (linux_enable_bts): ... this.
1951 (linux_btrace_conf): New.
1952 (perf_event_skip_record): Renamed into ...
1953 (perf_event_skip_bts_record): ... this. Updated users.
1954 (linux_disable_btrace): Split into this and ...
1955 (linux_disable_bts): ... this.
1956 (linux_read_btrace): Check format.
1957 * nat/linux-btrace.h (linux_enable_btrace): Update parameters.
1958 (linux_btrace_conf): New.
1959 (btrace_target_info)<ptid>: Moved.
1960 (btrace_target_info)<conf>: New.
1961 (btrace_target_info): Split into this and ...
1962 (btrace_tinfo_bts): ... this. Updated users.
1963 * btrace.c (btrace_enable): Update parameters.
1964 (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
1965 (btrace_conf_children, btrace_conf_attributes)
1966 (btrace_conf_elements): New.
1967 * btrace.h (btrace_enable): Update parameters.
1968 (btrace_conf, parse_xml_btrace_conf): New.
1969 * common/btrace-common.h (btrace_config): New.
1970 * feature/btrace-conf.dtd: New.
1971 * record-btrace.c (record_btrace_conf): New.
1972 (record_btrace_cmdlist): New.
1973 (record_btrace_enable_warn, record_btrace_open): Pass
1974 &record_btrace_conf.
1975 (record_btrace_info): Print recording format.
1976 (cmd_record_btrace_bts_start): New.
1977 (cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
1978 (_initialize_record_btrace): Add "record btrace bts" subcommand.
1979 Add "record bts" alias command.
1980 * remote.c (remote_state)<btrace_config>: New.
1981 (remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
1982 (remote_protocol_features): Add qXfer:btrace-conf:read.
1983 (remote_open_1): Call remote_btrace_reset.
1984 (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
1985 (btrace_target_info)<conf>: New.
1986 (btrace_sync_conf, btrace_read_config): New.
1987 (remote_enable_btrace): Update parameters. Call btrace_sync_conf and
1989 (remote_btrace_conf): New.
1990 (init_remote_ops): Initialize to_btrace_conf.
1991 (_initialize_remote): Add qXfer:btrace-conf packet.
1992 * target.c (target_enable_btrace): Update parameters.
1993 (target_btrace_conf): New.
1994 * target.h (target_enable_btrace): Update parameters.
1995 (target_btrace_conf): New.
1996 (target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
1997 (target_ops)<to_enable_btrace>: Update parameters and comment.
1998 (target_ops)<to_btrace_conf>: New.
1999 * target-delegates: Regenerate.
2000 * target-debug.h (target_debug_print_const_struct_btrace_config_p)
2001 (target_debug_print_const_struct_btrace_target_info_p): New.
2002 * NEWS: Announce new command and new packet.
2004 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
2006 * nat/linux-btrace.h (perf_event_buffer): New.
2007 (btrace_target_info) <buffer, size, data_head>: Replace with ...
2009 * nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
2010 (perf_event_buffer_size, perf_event_buffer_begin)
2011 (perf_event_buffer_end, linux_btrace_has_changed): Removed.
2013 (perf_event_new_data): New.
2015 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
2017 * btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
2018 * record-btrace.c (record_btrace_open): Remove call to
2019 target_supports_btrace.
2020 * remote.c (remote_supports_btrace): Update parameters.
2021 * target.c (target_supports_btrace): Update parameters.
2022 * target.h (to_supports_btrace, target_supports_btrace): Update
2024 * target-delegates.c: Regenerate.
2025 * target-debug.h (target_debug_print_enum_btrace_format): New.
2026 * nat/linux-btrace.c
2027 (kernel_supports_btrace): Rename into ...
2028 (kernel_supports_bts): ... this. Update users. Update warning text.
2029 (intel_supports_btrace): Rename into ...
2030 (intel_supports_bts): ... this. Update users.
2031 (cpu_supports_btrace): Rename into ...
2032 (cpu_supports_bts): ... this. Update users.
2033 (linux_supports_btrace): Update parameters. Split into this and ...
2034 (linux_supports_bts): ... this.
2035 * nat/linux-btrace.h (linux_supports_btrace): Update parameters.
2037 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
2039 * Makefile.in (SFILES): Add common/btrace-common.c.
2040 (COMMON_OBS): Add common/btrace-common.o.
2041 (btrace-common.o): Add build rules.
2042 * btrace.c (parse_xml_btrace): Update parameters.
2043 (parse_xml_btrace_block): Set format field.
2044 (btrace_add_pc, btrace_fetch): Use struct btrace_data.
2045 (do_btrace_data_cleanup, make_cleanup_btrace_data): New.
2046 (btrace_compute_ftrace): Split into this and...
2047 (btrace_compute_ftrace_bts): ...this.
2048 (btrace_stitch_trace): Split into this and...
2049 (btrace_stitch_bts): ...this.
2050 * btrace.h (parse_xml_btrace): Update parameters.
2051 (make_cleanup_btrace_data): New.
2052 * common/btrace-common.c: New.
2053 * common/btrace-common.h: Include common-defs.h.
2054 (btrace_block_s): Update comment.
2055 (btrace_format): New.
2056 (btrace_format_string): New.
2057 (btrace_data_bts): New.
2059 (btrace_data_init, btrace_data_fini, btrace_data_empty): New.
2060 * remote.c (remote_read_btrace): Update parameters.
2061 * target.c (target_read_btrace): Update parameters.
2062 * target.h (target_read_btrace): Update parameters.
2063 (target_ops)<to_read_btrace>: Update parameters.
2064 * x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
2065 * target-delegates.c: Regenerate.
2066 * target-debug (target_debug_print_struct_btrace_data_p): New.
2067 * nat/linux-btrace.c (linux_read_btrace): Split into this and...
2068 (linux_read_bts): ...this.
2069 * nat/linux-btrace.h (linux_read_btrace): Update parameters.
2071 2015-02-06 Doug Evans <dje@google.com>
2073 * remote-m32r-sdi.c: Include symfile.h.
2075 2015-02-06 Doug Evans <dje@google.com>
2077 * symtab.h (clear_symtab_users, deduce_language_from_filename): Move
2078 * symfile.h (clear_symtab_users, deduce_language_from_filename): ...
2081 2015-02-06 Pedro Alves <palves@redhat.com>
2083 * linux-thread-db.c (find_new_threads_callback): Add debug output.
2085 2015-02-06 Simon Marchi <simon.marchi@ericsson.com>
2088 * breakpoint.c (map_breakpoint_numbers): Check for empty args string.
2089 (enable_count_command): Check args for NULL value.
2091 2015-02-05 Doug Evans <xdje42@gmail.com>
2093 * guile/scm-frame.c: Fix spelling errors in a comment.
2095 2015-02-04 Jan Kratochvil <jan.kratochvil@redhat.com>
2097 * python/python-internal.h (Py_hash_t): Define it for Python <3.2.
2098 * python/py-value.c (valpy_fetch_lazy): Use it. Remove cast to the
2101 2015-02-04 Pedro Alves <palves@redhat.com>
2103 * linux-nat.c (handle_extended_wait): Don't resume LWPs here.
2104 (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
2106 (resume_stopped_resumed_lwps): Don't check whether the thread is
2107 marked as executing.
2108 (linux_nat_wait_1): Use resume_stopped_resumed_lwps.
2110 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
2112 * regset.h (struct regset): Add flags field.
2113 (REGSET_VARIABLE_SIZE): New value for a regset's flags field.
2114 * corelow.c (get_core_register_section): Add warning if the size
2115 exceeds the requested size and the regset does not have the
2116 REGSET_VARIABLE_SIZE flag set.
2117 * alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
2119 * armbsd-tdep.c (armbsd_gregset): Likewise.
2120 * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
2121 * hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
2122 * m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
2123 * mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.
2125 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
2127 * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
2128 For ".reg-xstate", explicitly specify the requested section size
2129 via X86_XSTATE_SIZE instead of just 0 on input and
2130 X86_XSTATE_MAX_SIZE on output.
2131 * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
2134 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
2137 * gdbarch.sh (iterate_over_regset_sections_cb): Document this
2138 function type, particularly its SIZE parameter.
2139 * gdbarch.h: Regenerate.
2140 * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
2141 actual against required size using ">=" instead of "==".
2142 (amd64_collect_fpregset): Likewise.
2143 * i386-tdep.c (i386_supply_gregset): Likewise.
2144 (i386_collect_gregset): Likewise.
2145 (i386_supply_fpregset): Likewise.
2146 (i386_collect_fpregset): Likewise.
2147 * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
2148 (mips_fill_gregset_wrapper): Likewise.
2149 (mips_supply_fpregset_wrapper): Likewise.
2150 (mips_fill_fpregset_wrapper): Likewise.
2151 (mips64_supply_gregset_wrapper): Likewise.
2152 (mips64_fill_gregset_wrapper): Likewise.
2153 (mips64_supply_fpregset_wrapper): Likewise.
2154 (mips64_fill_fpregset_wrapper): Likewise.
2155 * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
2156 (am33_supply_fpregset_method): Likewise.
2157 (am33_collect_gregset_method): Likewise.
2158 (am33_collect_fpregset_method): Likewise.
2160 2015-02-04 Doug Evans <dje@google.com>
2161 Pedro Alves <palves@redhat.com>
2162 Eli Zaretskii <eliz@gnu.org>
2165 * tui/tui-command.c (tui_refresh_cmd_win): New function.
2166 * tui/tui-command.c (tui_refresh_cmd_win): Declare.
2167 * tui/tui-file.c: #include tui/tui-command.h.
2168 (tui_file_fputs): Refresh command window if stream is not gdb_stdout.
2169 (tui_file_flush): Refresh command window if stream is gdb_stdout.
2170 * tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.
2172 2015-02-04 Pedro Alves <palves@redhat.com>
2175 * event-loop.c (gdb_do_one_event): Add default switch case.
2177 2015-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2179 Filter out inferior gcc option -fpreprocessed.
2180 * compile/compile.c (filter_args): New function.
2183 2015-02-03 Pedro Alves <palves@redhat.com>
2185 * event-loop.c: Don't declare nor define a queue type for
2187 (event_queue): Delete.
2188 (create_event, create_file_event, gdb_event_xfree)
2189 (initialize_event_loop, process_event): Delete.
2190 (gdb_do_one_event): Return as soon as one event is handled.
2191 (handle_file_event): Change prototype. Used the passed in
2192 file_handler pointer and ready_mask instead of looping over all
2194 (gdb_wait_for_event): Update the poll/select timeouts before
2195 blocking. Run event handlers directly instead of queueing events.
2196 Return as soon as one event is handled.
2197 (struct async_event_handler_data): Delete.
2198 (invoke_async_event_handler): Delete.
2199 (check_async_event_handlers): Change return type to int. Run
2200 event handlers directly instead of queueing events. Return as
2201 soon as one event is handled.
2202 (handle_timer_event): Delete.
2203 (update_wait_timeout): New function, factored out from
2205 (poll_timers): Reimplement.
2206 * event-loop.h (initialize_event_loop): Delete declaration.
2207 * top.c (gdb_init): Don't call initialize_event_loop.
2209 2015-02-03 Pedro Alves <palves@redhat.com>
2211 * event-loop.c (clear_async_event_handler): New function.
2212 * event-loop.h (clear_async_event_handler): New declaration.
2213 * record-btrace.c (record_btrace_async): New function.
2214 (init_record_btrace_ops): Install record_btrace_async.
2215 * record-full.c (record_full_async): New function.
2216 (record_full_resume): Don't mark the async event source here.
2217 (init_record_full_ops): Install record_full_async.
2218 (record_full_core_resume): Don't mark the async event source here.
2219 (init_record_full_core_ops): Install record_full_async.
2220 * remote.c (remote_async): Mark and clear the async stop reply
2221 queue event-loop token as appropriate.
2223 2015-02-03 Pedro Alves <palves@redhat.com>
2225 * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
2226 target_is_async_p instead of target_can_async.
2227 (linux_nat_wait): Use target_is_async_p instead of
2228 target_can_async. Don't enable async here.
2229 * remote.c (interrupt_query, remote_wait, putpkt_binary): Use
2230 target_is_async_p instead of target_can_async.
2232 2015-02-02 Simon Marchi <simon.marchi@ericsson.com>
2234 * varobj.h (lang_varobj_ops): Mention which return values need
2237 2015-02-02 Joel Brobecker <brobecker@adacore.com>
2239 * dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker.
2241 2015-02-02 Joel Brobecker <brobecker@adacore.com>
2244 * ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
2245 results found in the cache.
2247 2015-02-02 Joel Brobecker <brobecker@adacore.com>
2250 * ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
2251 when allocating a new one.
2253 2015-02-01 Tom Tromey <tom@tromey.com>
2255 * MAINTAINERS: Remove myself.
2257 2015-01-31 Doug Evans <xdje42@gmail.com>
2259 * dwarf2read.c (process_structure_scope): Update setting of
2260 TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
2261 * gdbtypes.c (internal_type_vptr_fieldno): New function.
2262 (set_type_vptr_fieldno): New function.
2263 (internal_type_vptr_basetype): New function.
2264 (set_type_vptr_basetype): New function.
2265 (get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
2267 (allocate_cplus_struct_type): Initialize vptr_fieldno.
2268 (recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
2269 (print_cplus_stuff): ... moved here.
2270 (copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
2271 * gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
2273 (struct cplus_struct_type): ... here. All uses updated.
2274 (TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
2275 (internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
2276 (internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
2277 * stabsread.c (read_tilde_fields): Update setting of
2278 TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
2280 2015-01-31 Doug Evans <xdje42@gmail.com>
2282 * cp-valprint.c (cp_find_class_member): Rename parameter domain_p
2284 (cp_print_class_member): Rename local domain to self_type.
2285 * dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
2286 domain_type to self_type.
2287 (set_die_type) <need_gnat_info>: Handle
2288 TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
2289 * gdb-gdb.py (StructMainTypePrettyPrinter): Handle
2290 TYPE_SPECIFIC_SELF_TYPE.
2291 * gdbtypes.c (internal_type_self_type): New function.
2292 (set_type_self_type): New function.
2293 (smash_to_memberptr_type): Rename parameter domain to self_type.
2294 Update setting of TYPE_SELF_TYPE.
2295 (smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
2296 (smash_to_method_type): Rename parameter domain to self_type.
2297 Update setting of TYPE_SELF_TYPE.
2298 (check_stub_method): Call smash_to_method_type.
2299 (recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
2300 (copy_type_recursive): Ditto.
2301 * gdbtypes.h (enum type_specific_kind): New value
2302 TYPE_SPECIFIC_SELF_TYPE.
2303 (struct main_type) <type_specific>: New member self_type.
2304 (struct cplus_struct_type) <fn_field.type>: Update comment.
2305 (TYPE_SELF_TYPE): Rewrite.
2306 (internal_type_self_type, set_type_self_type): Declare.
2307 * gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
2309 (gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
2310 * m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
2312 * stabsread.c (read_member_functions): Mark methods with
2313 TYPE_CODE_METHOD, not TYPE_CODE_FUNC. Update setting of
2316 2015-01-31 Doug Evans <xdje42@gmail.com>
2318 * gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE.
2321 2015-01-31 Doug Evans <xdje42@gmail.com>
2323 * gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
2324 or unions. Return zero if union.
2325 (gnuv3_get_vtable): Call check_typedef. Assert only passed structs.
2326 (gnuv3_rtti_type): Pass already-check_typedef'd value to
2328 (compute_vtable_size): Assert only passed structs.
2329 (gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.
2331 2015-01-31 Doug Evans <xdje42@gmail.com>
2333 * gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD
2336 2015-01-31 Gary Benson <gbenson@redhat.com>
2337 Doug Evans <dje@google.com>
2342 * cli/cli-cmds.c (complete_command): Notify user if max-completions
2344 * common/common-exceptions.h (enum errors)
2345 <MAX_COMPLETIONS_REACHED_ERROR>: New value.
2346 * completer.h (get_max_completions_reached_message): New declaration.
2347 (max_completions): Likewise.
2348 (completion_tracker_t): New typedef.
2349 (new_completion_tracker): New declaration.
2350 (make_cleanup_free_completion_tracker): Likewise.
2351 (maybe_add_completion_enum): New enum.
2352 (maybe_add_completion): New declaration.
2353 (throw_max_completions_reached_error): Likewise.
2354 * completer.c (max_completions): New global variable.
2355 (new_completion_tracker): New function.
2356 (free_completion_tracker): Likewise.
2357 (make_cleanup_free_completion_tracker): Likewise.
2358 (maybe_add_completions): Likewise.
2359 (throw_max_completions_reached_error): Likewise.
2360 (complete_line): Remove duplicates and limit result to max_completions
2362 (get_max_completions_reached_message): New function.
2363 (gdb_display_match_list): Handle max_completions.
2364 (_initialize_completer): New declaration and function.
2365 * symtab.c: Include completer.h.
2366 (completion_tracker): New static variable.
2367 (completion_list_add_name): Call maybe_add_completion.
2368 (default_make_symbol_completion_list_break_on_1): Renamed from
2369 default_make_symbol_completion_list_break_on. Maintain
2370 completion_tracker across calls to completion_list_add_name.
2371 (default_make_symbol_completion_list_break_on): New function.
2372 * top.c (init_main): Set rl_completion_display_matches_hook.
2373 * tui/tui-io.c: Include completer.h.
2374 (tui_old_rl_display_matches_hook): New static global.
2375 (tui_rl_display_match_list): Notify user if max-completions reached.
2376 (tui_setup_io): Save/restore rl_completion_display_matches_hook.
2377 * NEWS (New Options): Mention set/show max-completions.
2379 2015-01-31 Gary Benson <gbenson@redhat.com>
2381 * symtab.c (struct add_name_data) <code>: New field.
2383 (add_symtab_completions): New function.
2384 (symtab_expansion_callback): Likewise.
2385 (default_make_symbol_completion_list_break_on): Set datum.code.
2386 Move minimal symbol scan before calling expand_symtabs_matching.
2387 Scan known primary symtabs for externs and statics before calling
2388 expand_symtabs_matching. Pass symtab_expansion_callback as
2389 expansion_notify argument to expand_symtabs_matching. Do not scan
2390 primary symtabs for externs and statics after calling
2391 expand_symtabs_matching.
2393 2015-01-31 Gary Benson <gbenson@redhat.com>
2395 * symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
2396 (struct quick_symbol_functions) <expand_symtabs_matching>:
2397 New argument expansion_notify. All uses updated.
2398 (expand_symtabs_matching): New argument expansion_notify.
2400 * symfile-debug.c (debug_qf_expand_symtabs_matching):
2401 Also print expansion notify.
2402 * symtab.c (expand_symtabs_matching_via_partial): Call
2403 expansion_notify whenever a partial symbol table is expanded.
2404 * dwarf2read.c (dw2_expand_symtabs_matching): Call
2405 expansion_notify whenever a symbol table is instantiated.
2407 2015-01-31 Doug Evans <xdje42@gmail.com>
2409 * cli-out.c: #include completer.h, readline/readline.h.
2410 (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
2411 (cli_mld_flush, cld_mld_erase_entire_line): Ditto.
2412 (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
2413 * cli-out.h (cli_display_match_list): Declare.
2414 * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
2415 (ELLIPSIS_LEN): Ditto.
2416 (gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
2417 (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
2418 (gdb_fnprint, gdb_print_filename): Ditto.
2419 (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
2420 (gdb_display_match_list): Ditto.
2421 * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
2422 (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
2423 (mld_beep_ftype, mld_read_key_ftype): Ditto.
2424 (match_list_displayer): New struct.
2425 (gdb_display_match_list): Declare.
2426 * top.c (init_main): Set rl_completion_display_matches_hook.
2427 * tui/tui-io.c: #include completer.h.
2428 (printable_part, PUTX, print_filename, get_y_or_n): Delete.
2429 (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
2430 (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
2431 (tui_mld_getc, tui_mld_read_key): Ditto.
2432 (tui_rl_display_match_list): Rewrite.
2433 (tui_handle_resize_during_io): New arg for_completion. All callers
2436 2015-01-31 Doug Evans <xdje42@gmail.com>
2438 Add symbol lookup cache.
2439 * NEWS: Document new options and commands.
2440 * symtab.c (symbol_cache_key): New static global.
2441 (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
2442 (SYMBOL_LOOKUP_FAILED): New macro.
2443 (symbol_cache_slot_state): New enum.
2444 (block_symbol_cache): New struct.
2445 (symbol_cache): New struct.
2446 (new_symbol_cache_size, symbol_cache_size): New static globals.
2447 (hash_symbol_entry, eq_symbol_entry): New functions.
2448 (symbol_cache_byte_size, resize_symbol_cache): New functions.
2449 (make_symbol_cache, free_symbol_cache): New functions.
2450 (get_symbol_cache, symbol_cache_cleanup): New function.
2451 (set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
2452 (symbol_cache_lookup, symbol_cache_clear_slot): New function.
2453 (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
2454 (symbol_cache_flush, symbol_cache_dump): New functions.
2455 (maintenance_print_symbol_cache): New function.
2456 (maintenance_flush_symbol_cache): New function.
2457 (symbol_cache_stats): New function.
2458 (maintenance_print_symbol_cache_statistics): New function.
2459 (symtab_new_objfile_observer): New function.
2460 (symtab_free_objfile_observer): New function.
2461 (lookup_static_symbol, lookup_global_symbol): Use symbol cache.
2462 (_initialize_symtab): Init symbol_cache_key. New parameter
2463 maint symbol-cache-size. New maint commands print symbol-cache,
2464 print symbol-cache-statistics, flush-symbol-cache.
2465 Install new_objfile, free_objfile observers.
2467 2015-01-31 Joel Brobecker <brobecker@adacore.com>
2470 * symfile.c (clear_symtab_users): Move call to breakpoint_re_set
2473 2015-01-31 Doug Evans <xdje42@gmail.com>
2475 * NEWS: Mention inlined scripts in .debug_gdb_scripts section.
2476 * auto-load.c: #include ctype.h.
2477 (struct auto_load_pspace_info): Replace member loaded_scripts with
2478 new members loaded_script_files, loaded_script_texts.
2479 (auto_load_pspace_data_cleanup): Update.
2480 (init_loaded_scripts_info): Update.
2481 (get_auto_load_pspace_data_for_loading): Update.
2482 (maybe_add_script_file): Renamed from maybe_add_script. All callers
2484 (maybe_add_script_text): New function.
2485 (clear_section_scripts): Update.
2486 (source_script_file, execute_script_contents): New functions.
2487 (source_section_scripts): Add support for
2488 SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT.
2489 (print_scripts): New function.
2490 (auto_load_info_scripts): Also print inlined scripts.
2491 (maybe_print_unsupported_script_warning): Renamed from
2492 unsupported_script_warning_print. All callers updated.
2493 (maybe_print_script_not_found_warning): Renamed from
2494 script_not_found_warning_print. All callers updated.
2495 * extension-priv.h (struct extension_language_script_ops): New member
2496 objfile_script_executor.
2497 * extension.c (ext_lang_objfile_script_executor): New function.
2498 * extension.h (objfile_script_executor_func): New typedef.
2499 (ext_lang_objfile_script_executor): Declare.
2500 * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare.
2501 * guile/guile.c (guile_extension_script_ops): Update.
2502 * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function.
2503 * python/python.c (python_extension_script_ops): Update.
2504 (gdbpy_execute_objfile_script): New function.
2506 2015-01-31 Eli Zaretskii <eliz@gnu.org>
2508 * tui/tui-io.c (tui_expand_tabs): New function.
2509 (tui_puts, tui_redisplay_readline): Expand TABs into the
2510 appropriate number of spaces.
2511 * tui/tui-regs.c: Include tui-io.h.
2512 (tui_register_format): Call tui_expand_tabs to expand TABs into
2513 the appropriate number of spaces.
2514 * tui/tui-io.h: Add prototype for tui_expand_tabs.
2516 2015-01-30 Doug Evans <dje@google.com>
2518 * NEWS: "info source" command now display producer string if present.
2519 * source.c (source_info): Print producer string if present.
2521 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2523 * varobj.c (varobj_delete): Fix comment.
2525 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2527 * varobj.c (create_child): Modify comment.
2529 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2531 * ada-varobj.c (ada_number_of_children): Constify struct varobj *
2533 (ada_name_of_variable): Same.
2534 (ada_path_expr_of_child): Same.
2535 (ada_value_of_variable): Same.
2536 (ada_value_is_changeable_p): Same.
2537 (ada_value_has_mutated): Same.
2538 * c-varobj.c (varobj_is_anonymous_child): Same.
2539 (c_is_path_expr_parent): Same.
2540 (c_number_of_children): Same.
2541 (c_name_of_variable): Same.
2542 (c_path_expr_of_child): Same.
2544 (c_value_of_variable): Same.
2545 (cplus_number_of_children): Same.
2546 (cplus_name_of_variable): Same.
2547 (cplus_path_expr_of_child): Same.
2548 (cplus_value_of_variable): Same.
2549 * jv-varobj.c (java_number_of_children): Same.
2550 (java_name_of_variable): Same.
2551 (java_path_expr_of_child): Same.
2552 (java_value_of_variable): Same.
2553 * varobj.c (number_of_children): Same.
2554 (name_of_variable): Same.
2556 (varobj_ensure_python_env): Same.
2557 (varobj_get_objname): Same.
2558 (varobj_get_expression): Same.
2559 (varobj_get_display_format): Same.
2560 (varobj_get_display_hint): Same.
2561 (varobj_has_more): Same.
2562 (varobj_get_thread_id): Same.
2563 (varobj_get_frozen): Same.
2564 (dynamic_varobj_has_child_method): Same.
2565 (varobj_get_gdb_type): Same.
2566 (is_path_expr_parent): Same.
2567 (varobj_default_is_path_expr_parent): Same.
2568 (varobj_get_language): Same.
2569 (varobj_get_attributes): Same.
2570 (varobj_is_dynamic_p): Same.
2571 (varobj_get_child_range): Same.
2572 (varobj_value_has_mutated): Same.
2573 (varobj_get_value_type): Same.
2574 (number_of_children): Same.
2575 (name_of_variable): Same.
2576 (check_scope): Same.
2577 (varobj_editable_p): Same.
2578 (varobj_value_is_changeable_p): Same.
2579 (varobj_floating_p): Same.
2580 (varobj_default_value_is_changeable_p): Same.
2582 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2584 * varobj.c (varobj_get_path_expr): Set var->path_expr.
2585 * c-varobj.c (c_path_expr_of_child): Set local var instead of
2587 (cplus_path_expr_of_child): Same.
2589 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2591 * mi-cmd-var.c (print_varobj): Free varobj_get_expression
2593 (mi_cmd_var_info_expression): Same.
2594 * varobj.c (varobj_get_expression): Mention in the comment that
2595 the result must by freed by the caller.
2597 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2599 * mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
2601 (varobj_update_one): Same.
2602 * varobj.c (update_type_if_necessary): Free curr_type_str and
2604 (varobj_get_type): Specify in comment that the result needs to be
2605 freed by the caller.
2607 2015-01-29 Doug Evans <dje@google.com>
2610 * dwarf2read.c (dwarf_decode_line_header): Punt if version > 4.
2612 2015-01-25 Mark Wielaard <mjw@redhat.com>
2614 * dwarf2read.c (checkproducer): Call producer_is_gcc.
2615 * utils.c (producer_is_gcc_ge_4): Likewise.
2616 (producer_is_gcc): New function.
2617 * utils.h (producer_is_gcc): New declaration.
2619 2015-01-29 Joel Brobecker <brobecker@adacore.com>
2621 * gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
2623 * gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
2624 parameter by "addr_stack" parameter.
2625 (resolve_dynamic_range): Replace "addr" parameter by
2626 "stack_addr" parameter. Update function documentation.
2627 Update code accordingly.
2628 (resolve_dynamic_array, resolve_dynamic_union)
2629 (resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
2630 (resolve_dynamic_type): Update code, following the changes made
2631 to resolve_dynamic_type_internal's interface.
2632 * dwarf2loc.h (struct property_addr_info): New.
2633 (dwarf2_evaluate_property): Replace "address" parameter
2634 by "addr_stack" parameter. Adjust function documentation.
2635 (struct dwarf2_offset_baton): New.
2636 (struct dwarf2_property_baton): Update documentation of
2637 field "referenced_type" to be more general. New field
2638 "offset_info" in union data field.
2639 * dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
2640 parameter by "addr_stack" parameter. Adjust code accordingly.
2641 Add support for PROP_ADDR_OFFSET properties.
2642 * dwarf2read.c (attr_to_dynamic_prop): Add support for
2643 DW_AT_data_member_location attributes as well. Use case
2644 statements instead of if/else condition.
2646 2015-01-29 Joel Brobecker <brobecker@adacore.com>
2648 * ada-varobj.c (ada_varobj_get_array_number_of_children):
2649 Return zero if PARENT_VALUE is NULL and parent_type's
2650 range type is dynamic.
2652 2015-01-29 Joel Brobecker <brobecker@adacore.com>
2654 * gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
2655 nonzero if the type's subtype is dynamic.
2656 (resolve_dynamic_range): Also resolve the range's subtype.
2658 2015-01-29 Alexander Klimov <alserkli@inbox.ru> (tiny patch)
2660 Pushed by Joel Brobecker <brobecker@adacore.com>.
2661 * symfile.c (unmap_overlay_command): Initialize sec to NULL.
2663 2015-01-27 Doug Evans <dje@google.com>
2665 * NEWS: Mention gdb.Objfile.username.
2666 * python/py-objfile.c (objfpy_get_username): New function.
2667 (objfile_getset): Add "username".
2669 2015-01-24 Mark Wielaard <mjw@redhat.com>
2671 * stack.c (return_command): Markup warning message with _.
2673 2015-01-24 Doug Evans <xdje42@gmail.com>
2675 * gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete.
2677 2015-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
2679 Fix 100x slowdown regression on DWZ files.
2680 * dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
2681 (struct line_header): Add offset and offset_in_dwz.
2682 (dwarf_decode_lines): Add parameter decode_mapping to the declaration.
2683 (free_line_header_voidp): New declaration.
2684 (line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
2686 (dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
2687 (handle_DW_AT_stmt_list): Use line_header_hash.
2688 (free_line_header_voidp): New function.
2689 (dwarf_decode_line_header): Initialize offset and offset_in_dwz.
2690 (dwarf_decode_lines): New parameter decode_mapping, use it.
2691 (dwarf2_free_objfile): Free line_header_hash.
2693 2015-01-23 Simon Marchi <simon.marchi@ericsson.com>
2696 * valops.c (value_rtti_indirect_type): Catch exception thrown by
2699 2015-01-15 Mark Wielaard <mjw@redhat.com>
2701 * dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
2703 * gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
2704 calling_convention an 8 bit bit field.
2705 (TYPE_NO_RETURN): New macro.
2706 * infcmd.c (finish_command): Query if function does not return
2708 * stack.c (return_command): Likewise.
2710 2015-01-23 Pedro Alves <palves@redhat.com>
2712 * linux-nat.c (linux_is_async_p): New macro.
2713 (linux_nat_is_async_p):
2714 (linux_nat_terminal_inferior): Check whether the target can async
2715 instead of whether it is already async.
2716 (linux_nat_terminal_ours): Don't check whether the target is
2718 (linux_async_pipe): Use linux_is_async_p.
2720 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2722 * NEWS (Changes since GDB 7.9): Add 'thread apply all' option
2724 * thread.c (tp_array_compar_ascending, tp_array_compar): New.
2725 (thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
2726 Sort tp_array using tp_array_compar.
2727 (_initialize_thread): Extend thread_apply_all_command help.
2729 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2731 * corelow.c (core_open): Call also thread_command.
2732 * gdbthread.h (thread_command): New prototype moved from ...
2733 * thread.c (thread_command): ... here.
2734 (thread_command): Make it global.
2736 2015-01-22 Pedro Alves <palves@redhat.com>
2738 * configure.ac [*mingw32*]: Check $curses_found instead of
2740 * configure: Regenerate.
2741 * windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
2742 HAVE_NCURSES_NCURSES_H checks.
2744 2015-01-22 Eli Zaretskii <eliz@gnu.org>
2746 * tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
2747 fails with the 1st arg NULL, try again with "unknown". Don't test
2748 the "cup" capability: it isn't supported by the Windows port of
2749 ncurses, but the Windows console driver is still capable of
2752 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2754 * compile/compile.c (_initialize_compile): Use -fPIE for compile_args.
2756 2015-01-22 Eli Zaretskii <eliz@gnu.org>
2758 * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
2759 (ALLDEPFILES): Remove irix5-nat.c. These two are part of the
2760 reason that "make TAGS" is broken.
2762 2015-01-22 Chen Gang <gang.chen.5i5j@gmail.com>
2764 * hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
2765 and check additional store instructions.
2767 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
2769 * MAINTAINERS (Write After Approval): Add "Wei-cheng Wang".
2771 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
2773 * ppc-linux-tdep.c (ppc_skip_trampoline_code,
2774 ppc_canonicalize_syscall, ppc_linux_syscall_record,
2775 ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments.
2776 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
2777 * rs6000-tdep.c (rs6000_epilogue_frame_cache,
2778 rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register,
2779 rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4,
2780 ppc_process_record_op19, ppc_process_record_op31,
2781 ppc_process_record_op59, ppc_process_record_op60,
2782 ppc_process_record_op63): Likewise.
2784 2015-01-20 Joel Brobecker <brobecker@adacore.com>
2786 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string)
2787 (linux_ptrace_test_ret_to_nx): Use safe_strerror instead of
2790 2015-01-20 Wei-cheng Wang <cole945@gmail.com>
2792 * rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19,
2793 ppc_process_record_op31, ppc_process_record_op59,
2794 ppc_process_record_op60, ppc_process_record_op63,
2795 ppc_process_record): Fix -Wformat warning.
2796 * rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60):
2797 Remove unused variables.
2799 2015-01-20 Chen Gang <gang.chen.5i5j@gmail.com>
2801 * MAINTAINERS (Write After Approval): Add "Chen Gang".
2803 2015-01-19 Eli Zaretskii <eliz@gnu.org>
2805 * configure.ac [*mingw32*]: Only add windows-termcap.o to
2806 CONFIG_OBS if not building with a curses library.
2807 * configure: Regenerate.
2809 * windows-termcap.c: Include defs.h. Make the whole body empty if
2810 either one of HAVE_CURSES_H or HAVE_NCURSES_H or
2811 HAVE_NCURSES_NCURSES_H is defined.
2813 2015-01-19 Joel Brobecker <brobecker@adacore.com>
2815 * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
2816 from end of line to start of next line.
2818 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
2820 * ppc-linux-tdep.c (ppc_skip_trampoline_code):
2821 Scan PLT stub backward for reverse debugging.
2822 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
2824 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
2825 Ulrich Weigand <uweigand@de.ibm.com>
2827 * configure.tgt (powerpc*-*-linux): Add linux-record.o to
2829 (ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall
2831 (ppc_canonicalize_syscall, ppc_linux_syscall_record,
2832 ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions.
2833 (ppc_linux_init_abi): Set process_record, process_record_signal.
2834 * ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and
2835 ppc_linux_record_tdep to gdbarch_tdep.
2836 (ppc_process_record): New declaration.
2837 * rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4,
2838 ppc_process_record_op19, ppc_process_record_op31,
2839 ppc_process_record_op59, ppc_process_record_op60,
2840 ppc_process_record_op63, ppc_process_record): New functions.
2842 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
2844 * rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to
2845 rs6000_in_function_epilogue_frame_p and add an argument
2847 (rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id,
2848 rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer):
2850 (rs6000_epilogue_frame_unwind): New.
2851 (rs6000_gdbarch_init): Append epilogue unwinder.
2853 2015-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
2855 * nat/linux-personality.c: Replace "#ifndef
2856 HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
2857 !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
2860 2015-01-16 Eli Zaretskii <eliz@gnu.org>
2862 * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
2864 (_initialize_tui_win) <border-kind, border-mode>:
2865 <active-border-mode>: Use tui_set_var_cmd as the "set" function.
2866 (tui_set_tab_width_command): Fix the commentary.
2868 * tui/tui-win.h: Add prototype for tui_rehighlight_all.
2870 * tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
2872 (tui_set_tab_width_command): Delete and recreate the source and
2873 the disassembly windows, to show the effect of the changed tab
2876 * tui/tui-data.h (LINE_PREFIX): Make shorter
2877 (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
2878 "Thread NNNNN.XXXX" thread ID notation on Windows.
2880 2015-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2882 Fix gcc-5 compilation.
2883 * hppa-tdep.c (inst_saves_gr): Fix parentheses typo.
2885 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
2887 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
2888 (linux-personality.o): New rule.
2889 * common/common-defs.h: Include <stdint.h>.
2890 * config/aarch64/linux.mh (NATDEPFILES): Include
2891 linux-personality.o.
2892 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
2893 * config/arm/linux.mh (NATDEPFILES): Likewise.
2894 * config/i386/linux64.mh (NATDEPFILES): Likewise.
2895 * config/i386/linux.mh (NATDEPFILES): Likewise.
2896 * config/ia64/linux.mh (NATDEPFILES): Likewise.
2897 * config/m32r/linux.mh (NATDEPFILES): Likewise.
2898 * config/m68k/linux.mh (NATDEPFILES): Likewise.
2899 * config/mips/linux.mh (NATDEPFILES): Likewise.
2900 * config/pa/linux.mh (NATDEPFILES): Likewise.
2901 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
2902 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
2903 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
2904 * config/s390/linux.mh (NATDEPFILES): Likewise.
2905 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
2906 * config/sparc/linux.mh (NATDEPFILES): Likewise.
2907 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
2908 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
2909 * defs.h: Remove #include <stdint.h> (moved to
2910 common/common-defs.h).
2911 * linux-nat.c: Include nat/linux-personality.h. Remove #include
2912 <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
2913 nat/linux-personality.c).
2914 (linux_nat_create_inferior): Remove code to disable address space
2915 randomization (moved to nat/linux-personality.c). Create cleanup
2916 to disable address space randomization.
2917 * nat/linux-personality.c: New file.
2918 * nat/linux-personality.h: Likewise.
2920 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
2922 * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
2923 common/posix-strerror.c.
2924 (posix-strerror.o): New rule.
2925 (mingw-strerror.o): Likewise.
2926 * common/common-utils.h (safe_strerror): Move prototype to here,
2928 * common/common.host: New file.
2929 * common/mingw-strerror.c: Likewise.
2930 * common/posix-strerror.c: Likewise.
2931 * configure: Regenerated.
2932 * configure.ac: Source common/common.host. Add variable
2933 common_host_obs to gdb_host_obs.
2934 * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
2935 gdb/common/posix-strerror.c when warning about the use of
2937 * mingw-hdep.c (safe_strerror): Remove definition; move it to
2938 common/mingw-strerror.c.
2939 * posix-hdep.c (safe_strerror): Remove definition; move it to
2940 common/posix-hdep.c.
2941 * utils.h (safe_strerror): Remove prototype; move to
2942 common/common-utils.h.
2944 2015-01-15 Joel Brobecker <brobecker@adacore.com>
2948 2015-01-15 Joel Brobecker <brobecker@adacore.com>
2950 * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
2951 ___XA type if the array has already been fixed.
2953 2015-01-14 Yao Qi <yao@codesourcery.com>
2955 * Makefile.in (ppc-linux.o): New rule.
2956 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
2957 * configure.ac: AC_CHECK_FUNCS(getauxval).
2958 * config.in: Re-generated.
2959 * configure: Re-generated.
2960 * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
2962 * nat/ppc-linux.c: New file.
2963 * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
2964 Call ppc64_64bit_inferior_p.
2966 2015-01-14 Yao Qi <yao@codesourcery.com>
2968 * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
2970 (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
2971 (PPC_FEATURE_HAS_DFP): Likewise.
2972 (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
2973 (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
2974 (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
2975 Include "nat/ppc-linux.h".
2976 * nat/ppc-linux.h: New file.
2977 * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
2979 2015-01-14 Pedro Alves <palves@redhat.com>
2982 * breakpoint.c: Include "interps.h".
2983 (bpstat_do_actions_1): Also check whether the interpreter is
2986 2015-01-14 Pedro Alves <palves@redhat.com>
2989 * infrun.c (reinstall_readline_callback_handler_cleanup): Don't
2990 reinstall if the interpreter is sync.
2992 2015-01-13 Doug Evans <dje@google.com>
2994 * objfiles.c (objfile_filename): New function.
2995 * objfiles.h (objfile_filename): Declare it.
2996 (objfile_name): Add function comment.
2997 * python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
2998 bfd file name (which may be realpath'd), and the original name.
3000 2015-01-13 Joel Brobecker <brobecker@adacore.com>
3002 * NEWS: Create a new section for the next release branch.
3003 Rename the section of the current branch, now that it has
3006 2015-01-13 Joel Brobecker <brobecker@adacore.com>
3008 GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
3009 * version.in: Bump version to 7.9.50.DATE-cvs.
3011 2015-01-13 Joel Brobecker <brobecker@adacore.com>
3013 * nat/linux-procfs.c (linux_proc_attach_tgid_threads):
3014 Remove trailing new-line in argument of call to warning.
3016 2015-01-13 Joel Brobecker <brobecker@adacore.com>
3018 * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
3019 new-line in argument of call to "warning".
3021 2015-01-13 Joel Brobecker <brobecker@adacore.com>
3023 * ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
3024 in static block, then try searching for primitive types.
3026 2015-01-12 Patrick Palka <patrick@parcs.ath.cx>
3028 * top.h (gdb_add_history): Declare.
3029 * top.c (command_count): New variable.
3030 (gdb_add_history): New function.
3031 (gdb_safe_append_history): New static function.
3032 (quit_force): Call it.
3033 (command_line_input): Use gdb_add_history instead of
3035 * event-top.c (command_line_handler): Likewise.
3037 2015-01-12 James Clarke <jrtc27@jrtc27.com> (tiny patch)
3040 * darwin-nat.c: Replace <machine/setjmp.h> #include by
3041 <setjmp.h> #include.
3043 2015-01-11 Doug Evans <xdje42@gmail.com>
3045 * dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.
3047 2015-01-11 Doug Evans <xdje42@gmail.com>
3050 * NEWS: The "maint demangle" command is renamed as "demangle".
3051 * demangle.c: #include cli/cli-utils.h, language.h.
3052 (demangle_command): New function.
3053 (_initialize_demangle): Add new command "demangle".
3054 * maint.c (maintenance_demangle): Stub out.
3055 (_initialize_maint_cmds): Update help text for "maint demangle",
3056 and mark as deprecated.
3058 2015-01-11 Mark Kettenis <kettenis@gnu.org>
3060 * inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
3061 inferior_thread is a function.
3063 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
3065 * Makefile.in (.y.c): Don't munge yacc's #line
3068 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
3070 * utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
3071 to prompt for input.
3072 * tui/tui-hooks.c (tui_query_hook): Remove.
3073 (tui_install_hooks): Don't set deprecated_query_hook.
3074 * tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
3075 height calculation. Always update the command window's cur_line.
3077 2015-01-09 Pedro Alves <palves@redhat.com>
3079 * breakpoint.c (hardware_breakpoint_inserted_here_p): New
3081 * breakpoint.h (hardware_breakpoint_inserted_here_p): New
3083 * linux-nat.c (linux_nat_status_is_event): Move higher up in file.
3084 (linux_resume_one_lwp): Store the thread's PC. Adjust to clear
3086 (check_stopped_by_watchpoint): New function.
3087 (save_sigtrap): Reimplement.
3088 (linux_nat_stopped_by_watchpoint): Adjust.
3089 (linux_nat_lp_status_is_event): Delete.
3090 (stop_wait_callback): Only call save_sigtrap after storing the
3092 (status_callback): If the thread had been stopped for a breakpoint
3093 that has since been removed, discard the event and resume the LWP.
3094 (count_events_callback, select_event_lwp_callback): Use
3095 lwp_status_pending_p instead of linux_nat_lp_status_is_event.
3096 (cancel_breakpoint): Rename to ...
3097 (check_stopped_by_breakpoint): ... this. Record whether the LWP
3098 stopped for a software breakpoint or hardware breakpoint.
3099 (select_event_lwp): Only give preference to the stepping LWP in
3100 all-stop mode. Adjust comments.
3101 (stop_and_resume_callback): Remove references to new_pending_p.
3102 (linux_nat_filter_event): Likewise. Leave exit events of the
3103 leader thread pending here. Handle signal short circuiting here.
3104 Only call save_sigtrap after storing the pending waitstatus.
3105 (linux_nat_wait_1): Remove 'retry' label. Remove references to
3106 new_pending. Don't handle leaving events the caller is not
3107 interested in pending here, nor handle signal short-circuiting
3108 here. Also give equal priority to all LWPs that have had events
3109 in non-stop mode. If reporting a software breakpoint event,
3110 unadjust the LWP's PC.
3111 * linux-nat.h (enum lwp_stop_reason): New.
3112 (struct lwp_info) <stop_pc>: New field.
3113 (struct lwp_info) <stopped_by_watchpoint>: Delete field.
3114 (struct lwp_info) <stop_reason>: New field.
3115 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
3117 2015-01-09 Pedro Alves <palves@redhat.com>
3119 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
3120 Set the LWP's 'resumed' flag.
3122 2015-01-09 Pedro Alves <palves@redhat.com>
3124 * linux-nat.c (linux_resume_one_lwp): New function.
3125 (resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
3126 (linux_nat_resume): Use lwp_status_pending_p and
3127 linux_resume_one_lwp.
3128 (linux_handle_syscall_trap): Use linux_resume_one_lwp.
3129 (linux_handle_extended_wait): Use linux_resume_one_lwp.
3130 (status_callback, running_callback): Use lwp_status_pending_p.
3131 (lwp_status_pending_p): New function.
3132 (stop_and_resume_callback): Use lwp_status_pending_p.
3133 (linux_nat_filter_event): Use linux_resume_one_lwp.
3134 (linux_nat_wait_1): Always use status_callback to look for an LWP
3135 with a pending status. Use linux_resume_one_lwp.
3136 (resume_stopped_resumed_lwps): Use lwp_status_pending_p and
3137 linux_resume_one_lwp.
3139 2015-01-09 Pedro Alves <palves@redhat.com>
3141 * breakpoint.c (bp_location_inserted_here_p): New function,
3142 factored out from ...
3143 (breakpoint_inserted_here_p): ... here. Use
3144 ALL_BP_LOCATIONS_AT_ADDR.
3145 (software_breakpoint_inserted_here_p): Use
3146 bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.
3148 2014-01-09 Pedro Alves <palves@redhat.com>
3150 Skip enabling event reporting if the kernel supports
3152 * linux-thread-db.c: Include "nat/linux-ptrace.h".
3153 (thread_db_use_events): New function.
3154 (try_thread_db_load_1): Check thread_db_use_events before enabling
3156 (update_thread_state): New function.
3157 (attach_thread): Use it. Check thread_db_use_events before
3158 enabling event reporting.
3159 (thread_db_detach): Check thread_db_use_events before disabling
3161 (find_new_threads_callback): Check thread_db_use_events before
3162 enabling event reporting. Update the thread's state if not using
3163 libthread_db events.
3165 2015-01-09 Pedro Alves <palves@redhat.com>
3167 * linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
3168 about to wait for is > 0.
3169 * linux-thread-db.c (find_new_threads_callback): Ignore thread if
3170 the kernel thread ID is -1.
3172 2015-01-09 Pedro Alves <palves@redhat.com>
3174 * linux-nat.c (attach_proc_task_lwp_callback): New function.
3175 (linux_nat_attach): Use linux_proc_attach_tgid_threads.
3176 (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
3177 ptrace option flags.
3178 * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
3180 * nat/linux-procfs.c: Include <dirent.h>.
3181 (linux_proc_get_int): New parameter "warn". Handle it.
3182 (linux_proc_get_tgid): Adjust.
3183 (linux_proc_get_tracerpid): Rename to ...
3184 (linux_proc_get_tracerpid_nowarn): ... this.
3185 (linux_proc_pid_get_state): New function, factored out from
3186 (linux_proc_pid_has_state): ... this. Add new parameter "warn"
3188 (linux_proc_pid_is_gone): New function.
3189 (linux_proc_pid_is_stopped): Adjust.
3190 (linux_proc_pid_is_zombie_maybe_warn)
3191 (linux_proc_pid_is_zombie_nowarn): New functions.
3192 (linux_proc_pid_is_zombie): Use
3193 linux_proc_pid_is_zombie_maybe_warn.
3194 (linux_proc_attach_tgid_threads): New function.
3195 * nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
3196 (linux_proc_get_tracerpid): Rename to ...
3197 (linux_proc_get_tracerpid_nowarn): ... this, and update comment.
3198 (linux_proc_pid_is_gone): New declaration.
3199 (linux_proc_pid_is_zombie): Update comment.
3200 (linux_proc_pid_is_zombie_nowarn): New declaration.
3201 (linux_proc_attach_lwp_func): New typedef.
3202 (linux_proc_attach_tgid_threads): New declaration.
3203 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
3204 use nowarn functions.
3205 (linux_ptrace_attach_fail_reason_string): Move here from
3206 gdbserver/linux-low.c and rename.
3207 (ptrace_supports_feature): If the current ptrace options are not
3208 known yet, check them now, instead of asserting.
3209 * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
3212 2015-01-09 Pedro Alves <palves@redhat.com>
3214 * linux-thread-db.c (thread_db_find_new_threads_silently)
3215 (try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
3216 (find_new_threads_once): Print debug output on gdb_stdlog.
3218 2015-01-09 Chen Gang <gang.chen.5i5j@gmail.com>
3219 Pedro Alves <palves@redhat.com>
3221 * compile/compile.c: Include "gdb_wait.h".
3222 (do_rmdir): Check return value, and free 'zap'.
3224 2015-01-08 Pedro Alves <palves@redhat.com>
3225 Yao Qi <yao@codesourcery.com>
3227 * dwarf2loc.c (indirect_pieced_value): Don't call
3228 gdb_sign_extend. Call extract_signed_integer instead.
3229 * utils.c (gdb_sign_extend): Remove.
3230 * utils.h (gdb_sign_extend): Remove declaration.
3232 2015-01-07 Pierre Muller <muller@sourceware.org>
3235 * stabsread.c (define_symbol): Set language for C++ special symbols.
3237 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
3239 * inflow.c (initial_gdb_ttystate): Tweak comment.
3241 2015-01-07 Joel Brobecker <brobecker@adacore.com>
3243 * inflow.c (set_initial_gdb_ttystate): Add empty line after
3244 comment documenting function.
3246 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
3248 * terminal.h (set_initial_gdb_ttystate): Declare.
3249 * inflow.c (initial_gdb_ttystate): New static variable.
3250 (set_initial_gdb_ttystate): New setter.
3251 (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate
3252 instead of our current terminal state.
3253 * top.c (gdb_init): Call set_initial_gdb_ttystate.
3255 2015-01-07 Joel Brobecker <brobecker@adacore.com>
3257 * guile/scm-type.c (tyscm_array_1): Add comment.
3258 * python/py-type.c (typy_array_1): Add comment.
3260 2015-01-06 Joel Brobecker <brobecker@adacore.com>
3262 * guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
3263 error if N2 is equal to N1 - 1.
3265 2015-01-06 Joel Brobecker <brobecker@adacore.com>
3267 * python/py-type.c (typy_array_1): Do not raise negative-length
3268 exception if N2 is equal to N1 - 1.
3270 2015-01-03 Doug Evans <xdje42@gmail.com>
3272 * c-exp.y: Whitespace cleanup.
3273 (classify_inner_name): Remove extra ;.
3275 2015-01-02 Maciej W. Rozycki <macro@codesourcery.com>
3277 * mips-tdep.c (mips32_scan_prologue): Keep the extracted stack
3280 2015-01-02 Doug Evans <dje@google.com>
3282 * dwarf2read.c (setup_type_unit_groups): Remove outdated comment.
3284 2015-01-02 Doug Evans <dje@google.com>
3286 * symtab.h (struct symbol): Fix typo in comment.
3288 2015-01-01 Joel Brobecker <brobecker@adacore.com>
3290 Update year range in copyright notice of all files.
3292 2015-01-01 Joel Brobecker <brobecker@adacore.com>
3294 * top.c (print_gdb_version): Update copyright year to 2015.
3296 2015-01-01 Joel Brobecker <brobecker@adacore.com>
3298 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
3300 For older changes see ChangeLog-2014.
3306 version-control: never