1 2015-07-10 Kevin Buettner <kevinb@redhat.com>
3 * rx-tdep.c (rx_get_opcode_byte): Use target_read_code instead
6 2015-07-10 Andrew Burgess <andrew.burgess@embecosm.com>
8 * tui/tui-win.c (tui_set_win_height): Use a cleanup to free the
10 (parse_scrolling_args): Likewise.
12 2015-07-10 Andrew Burgess <andrew.burgess@embecosm.com>
14 * tui/tui-win.c (focus_completer): Don't duplicate the tui window
15 names in this function.
17 2015-07-10 Andrew Burgess <andrew.burgess@embecosm.com>
19 * tui/tui-data.h (SRC_NAME): Convert to lower case.
21 (DATA_NAME): Likewise.
22 (DISASSEM_NAME): Likewise.
23 * tui/tui-win.c (tui_set_focus): Window names are now lower case.
24 (tui_set_win_height): Likewise.
25 (parse_scrolling_args): Likewise.
27 2015-07-10 Markus Metzger <markus.t.metzger@intel.com>
29 * record-btrace.c (record_btrace_goto_begin)
30 (record_btrace_goto_end, record_btrace_goto): Move call to
32 (record_btrace_set_replay): ... here. Set stop_pc.
33 * record-full.c (record_full_goto_entry): Set stop_pc.
35 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
37 * NEWS: Mention support for tracepoints on aarch64-linux.
39 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
41 * linux-aarch64-low.c (aarch64_supports_tracepoints): New
43 (the_low_target): Install it.
45 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
47 * gdb.trace/backtrace.exp: Set registers for aarch64 target.
48 * gdb.trace/collection.exp: Likewise.
49 * gdb.trace/mi-trace-frame-collected.exp: Likewise.
50 * gdb.trace/mi-trace-unavailable.exp: Likewise.
51 * gdb.trace/report.exp: Likewise.
52 * gdb.trace/trace-break.exp: Likewise.
53 * gdb.trace/unavailable.exp: Likewise.
54 * gdb.trace/while-dyn.exp: Likewise.
56 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
58 * aarch64-tdep.c: Add ax.h and ax-gdb.h includes.
59 (aarch64_gen_return_address): New function.
60 (aarch64_gdbarch_init): Hook it.
62 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
64 * aarch64-tdep.c (aarch64_make_stub_cache): Set available_p and
65 swallow NOT_AVAILABLE_ERROR.
66 (aarch64_stub_this_id): Call frame_id_build_unavailable_stack if
67 available_p is not set.
68 (aarch64_stub_frame_unwind_stop_reason): New function.
69 (aarch64_stub_unwind): Install it.
71 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
73 * aarch64-tdep.c (aarch64_prologue_cache) <available_p>: New
75 (aarch64_make_prologue_cache_1): New function, factored out from
76 aarch64_make_prologue_cache. Do not allocate cache. Set
78 (aarch64_make_prologue_cache): Reimplement wrapping
79 aarch64_make_prologue_cache_1, and swallowing
81 (aarch64_prologue_frame_unwind_stop_reason): New function.
82 Return UNWIND_UNAVAILABLE if available_p is not set.
83 (aarch64_prologue_unwind): Install it.
84 (aarch64_prologue_this_id): Move prev_pc and prev_sp limit
85 checks into aarch64_prologue_frame_unwind_stop_reason. Call
86 frame_id_build_unavailable_stack if available_p is not set.
88 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
90 * aarch64-tdep.c (aarch64_prologue_cache) <func, prev_pc>: New
92 (aarch64_scan_prologue): Set prev_pc.
93 (aarch64_make_prologue_cache): Set func.
94 (aarch64_make_stub_cache): Set prev_pc.
95 (aarch64_prologue_this_id): Remove local variables id, pc and
96 func. Read prev_pc and func from cache.
97 (aarch64_stub_this_id): Read prev_pc from cache.
99 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
101 * aarch64-tdep.c (aarch64_make_stub_cache): Update comment. New
102 argument this_cache. Remove unused local variables reg and
103 unwound_fp. Return early if this_cache is already set. Set
105 (aarch64_stub_this_id): Update call to aarch64_make_stub_cache.
107 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
109 * aarch64-tdep.c (aarch64_make_prologue_cache): Update comment.
110 New argument this_cache. Return early if this_cache is already
112 (aarch64_prologue_this_id): Update call to
113 aarch64_make_prologue_cache.
114 (aarch64_prologue_prev_register): Likewise.
115 (aarch64_normal_frame_base): Likewise.
117 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
119 * c-valprint.c (c_val_print): Factor out memberptr printing code
120 from c_val_print to ...
121 (c_val_print_memberptr): ... this new function.
123 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
125 * c-valprint.c (c_val_print): Factor out int printing code to ...
126 (c_val_print_int): ... this new function.
128 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
130 * c-valprint.c (c_val_print): Factor out struct and union
132 (c_val_print_struct): ... this new function ...
133 (c_val_print_union): ... and this new function.
135 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
137 * c-valprint.c (c_val_print): Factor out pointer printing code
139 (c_val_print_ptr): ... this new function.
141 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
143 * c-valprint.c (c_valprint): Factor our array printing code from
145 (c_val_print_array): ... this new function.
147 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
149 * c-valprint.c (c_val_print): Factor out pointer printing code
151 (print_unpacked_pointer): ... this new function.
153 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
155 * c-valprint.c (c_val_print): Remove an assignment to i and move
158 2015-07-09 Yao Qi <yao.qi@linaro.org>
160 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity): Add
161 argument ptid. Update comments. Caller update.
163 2015-07-09 Markus Metzger <markus.t.metzger@intel.com>
165 * btrace.c (pt_print_packet): Print stop, vmcs, tma, mtc, cyc, and
168 2015-07-09 Markus Metzger <markus.t.metzger@intel.com>
170 * btrace.c (btrace_pt_readmem_callback): Change type of PC argument.
172 2015-07-08 Simon Marchi <simon.marchi@ericsson.com>
174 * progspace.c (delete_program_space): Add missing spaces.
176 2015-07-08 Simon Marchi <simon.marchi@ericsson.com>
178 * inferior.c (delete_inferior_1): Rename to ...
179 (delete_inferior): ..., remove 'silent' parameter, delete
180 program space when unused and remove call to prune_program_spaces.
181 Remove the old, unused, delete_inferior.
182 (delete_inferior_silent): Remove.
183 (prune_inferiors): Change call from delete_inferior_1 to
184 delete_inferior and remove 'silent' parameter. Remove call to
185 prune_program_spaces.
186 (remove_inferior_command): Idem.
187 * inferior.h (delete_inferior_1): Rename to...
188 (delete_inferior): ..., remove 'silent' parameter and remove the
189 original delete_inferior.
190 (delete_inferior_silent): Remove.
191 * mi/mi-main.c (mi_cmd_remove_inferior): Change call from
192 delete_inferior_1 to delete_inferior and remove 'silent'
194 * progspace.c (prune_program_spaces): Remove.
195 (pspace_empty_p): Rename to...
196 (program_space_empty_p): ... and make non-static.
197 (delete_program_space): New.
198 * progspace.h (prune_program_spaces): Remove declaration.
199 (program_space_empty_p): New declaration.
200 (delete_program_space): New declaration.
201 * monitor.c (monitor_close): Replace call to
202 delete_thread_silent and delete_inferior_silent with
203 discard_all_inferiors.
205 2015-07-08 Patrick Palka <patrick@parcs.ath.cx>
207 * defs.h (deprecated_register_changed_hook): Remove prototype.
208 * interps.c (clear_iterpreter_hooks): Remove reference to
209 deprecated_register_changed_hook.
210 * top.c (deprecated_register_changed_hook): Remove prototype.
211 * valops.c (value_assign): Remove reference to
212 deprecated_register_changed_hook.
213 * tui/tui-hooks.c (tui_register_changed): Add parameter "frame".
214 Add comment documenting the function.
215 (tui_register_changed_observer): Define.
216 (tui_install_hooks): Remove reference to
217 deprecated_register_changed_hook. Set
218 tui_register_changed_observer.
219 (tui_remove_hooks): Remove reference to
220 deprecated_register_changed_hook. Unset
221 tui_register_changed_observer.
223 2015-07-08 Jan Kratochvil <jan.kratochvil@redhat.com>
226 * compile/compile-c-types.c (insert_type): Change gdb_assert to error.
228 2015-07-08 Robert O'Callahan <robert@ocallahan.org>
231 * ax-gdb.c (gen_conversion): Extend to 'to' bits, not 'from'.
233 2015-07-08 Markus Metzger <markus.t.metzger@intel.com>
235 * MAINTAINERS (Write After Approval): Add Markus T. Metzger.
237 2015-07-08 Markus Metzger <markus.t.metzger@intel.com>
239 * nat/linux-btrace.c (kernel_supports_bts, kernel_supports_pt):
240 Use safe_strerror() instead of strerror().
242 2015-07-07 Yao Qi <yao.qi@linaro.org>
244 * features/arm-with-m-fpa-layout.xml: Set architecture to arm.
245 * features/arm-with-m-fpa-layout.c: Regenerated.
246 * features/arm-with-m-vfp-d16.xml: Likewise.
247 * features/arm-with-m-vfp-d16.c: Regenerated.
248 * features/arm-with-m.xml: Likewise.
249 * features/arm-with-m.c: Regenerated.
250 * features/arm-with-neon.xml: Likewise.
251 * features/arm-with-neon.c: Regenerated.
252 * features/arm-with-vfpv2.xml: Likewise.
253 * features/arm-with-vfpv2.c: Regenerated.
254 * features/arm-with-vfpv3.xml: Likewise.
255 * features/arm-with-vfpv3.c: Regenerated.
257 2015-07-07 Yao Qi <yao.qi@linaro.org>
259 * aarch32-linux-nat.h (VFP_REGS_SIZE): New macro, moved from
261 * aarch64-linux-nat.c: Include aarch32-linux-nat.h and
263 (fetch_gregs_from_thread): Call aarch32_gp_regcache_supply
265 (store_gregs_to_thread): Call aarch32_gp_regcache_collect
267 (fetch_fpregs_from_thread): Call aarch32_vfp_regcache_supply
269 (store_fpregs_to_thread): Call aarch32_vfp_regcache_collect
271 (tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare.
272 (aarch64_linux_read_description): Return the right target
274 * arm-linux-nat.c (VFP_REGS_SIZE): Moved to aarch32-linux-nat.h.
275 * config/aarch64/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o.
276 * configure.tgt (aarch64*-*-linux*): Add arm-tdep.o and
279 2015-07-07 Yao Qi <yao.qi@linaro.org>
281 * aarch32-linux-nat.c: New file.
282 * aarch32-linux-nat.h: New file.
283 * arm-linux-nat.c: Include aarch32-linux-nat.h.
284 (fetch_regs): Move code to aarch32-linux-nat.c. Call
285 aarch32_gp_regcache_supply.
286 (store_regs): Move code to aarch32-linux-nat.c. Call
287 aarch32_gp_regcache_collect.
288 (fetch_vfp_regs): Move code to aarch32-linux-nat.c. Call
289 aarch32_vfp_regcache_supply.
290 (store_vfp_regs): Move code to aarch32-linux-nat.c. Call
291 aarch32_vfp_regcache_collect.
292 * config/arm/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o.
294 2015-07-07 Yao Qi <yao.qi@linaro.org>
296 * arm-linux-nat.c (store_fpregister): Remove.
297 (store_register): Likewise.
298 (fetch_fpregister): Likewise.
299 (fetch_register): Likewise.
300 (arm_linux_store_inferior_registers): Call store_regs and
301 store_fpregs instead.
302 (arm_linux_fetch_inferior_registers): Call fetch_fpregs and
305 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
307 * doc/gdb.texinfo (TUI): Restructure documentation on TUI layout
310 2015-07-06 Joel Brobecker <brobecker@adacore.com>
312 * NEWS: Create a new section for the next release branch.
313 Rename the section of the current branch, now that it has
316 2015-07-06 Joel Brobecker <brobecker@adacore.com>
318 GDB 7.10 branch created (66c4b3e8a628a207bc6aafef6af0c4128195f56e):
319 * version.in: Bump version to 7.10.50.DATE-cvs.
321 2015-07-06 Luis Machado <lgustavo@codesourcery.com>
323 * breakpoint.c (remove_breakpoint_1): Don't handle permanent
324 breakpoints in a special way.
325 (remove_breakpoint): Likewise.
326 (mark_breakpoints_out): Likewise.
328 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
330 * doc/gdb.texinfo (TUI): Add comma after @xref.
332 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
334 * tui/tui-win.c (tui_set_focus): Use structure member 'generic'
335 instead of casting the structure type.
337 2015-07-06 Simon Marchi <simon.marchi@ericsson.com>
339 * valops.c (search_struct_field): Remove OFFSET parameter.
340 (value_cast_structs): Adjust calls to search_struct_field.
341 (value_struct_elt): Same.
342 (find_overload_match): Same.
344 2015-07-06 Simon Marchi <simon.marchi@ericsson.com>
346 * value.c (value_fetch_lazy): Update comment, change return
348 * value.h (value_fetch_lazy): Change return value to void.
350 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
352 * tui/tui-data.c (tui_partial_win_by_name): Window name is const.
353 (tui_win_name): Make parameter and result const.
354 * tui/tui-data.h (tui_win_name): Make parameter and result const.
356 2015-07-06 Patrick Palka <patrick@parcs.ath.cx>
358 * i386-tdep.c (i386_mpx_info_bounds): Don't call error, instead
359 use printf_unfiltered.
360 (set_mpx_cmd): Add missing trailing space to command string
362 (_initialize_i386_tdep): Give the "mpx" prefix command its
365 2015-07-02 Kevin Buettner <kevinb@redhat.com>
367 * rx-tdep.c (RX_USP_REGNUM, RX_BPC_REGNUM): New constants.
368 (enum rx_frame_type): New.
369 (struct rx_prologue): Add new field `frame_type'.
370 (rx_analyze_prologue): Add `frame_type' parameter. Cache this
371 parameter in the prologue struct. Add code for recording
372 locations of PC and PSW for fast interrupt and exception frames.
373 (rx_skip_prologue): Adjust call to rx_analyze_prologue.
374 (rx_analyze_frame_prologue): Add `frame_type' parameter.
375 (rx_frame_type): New function.
376 (rx_frame_base): Fetch frame type and pass it to rx_analyze_prologue.
377 (rx_frame_this_id): Rename parameter `this_prologue_cache' to
379 (rx_frame_prev_register): Rename parameter `this_prologue_cache' to
380 `this_cache'. Add cases for RX_FRAME_TYPE_EXCEPTION and
381 RX_FRAME_TYPE_FAST_INTERRUPT.
382 (normal_frame_p, exception_frame_p, rx_frame_sniffer_common)
383 (rx_frame_sniffer, rx_exception_sniffer): New functions.
384 (rx_frame_unwind): Use rx_frame_sniffer instead of
385 default_frame_sniffer.
386 (rx_frame_unwind): New unwinder.
387 (rx_gdbarch_init): Register new unwinder.
389 2015-07-02 Kevin Buettner <kevinb@redhat.com>
391 * rx-tdep.c (RX_BPSW_REGNUM, RX_FPSW_REGNUM): New constants.
392 (struct gdbarch_tdep): Add fields rx_psw_type and rx_fpsw_type.
393 (rx_register_type): Add cases for RX_PSW_REGNUM, RX_BPSW_REGNUM,
395 (rx_gdbarch_init): Initialize PSW, BPSW, and FPSW flags types.
397 2015-07-02 Jan Kratochvil <jan.kratochvil@redhat.com>
399 Fix GCC false warning.
400 * s390-linux-tdep.c (s390_handle_arg): Initialize VAL.
402 2015-07-02 Yao Qi <yao.qi@linaro.org>
404 * aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Fix
405 typo in the debugging message.
407 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
409 * btrace.c: Include gdbcmd.h, cli/cli-utils.h, and ctype.h.
410 (maint_btrace_cmdlist, maint_btrace_set_cmdlist)
411 (maint_btrace_show_cmdlist, maint_btrace_pt_set_cmdlist)
412 (maint_btrace_pt_show_cmdlist, maint_btrace_pt_skip_pad)
413 (btrace_maint_clear): New.
414 (btrace_fetch, btrace_clear): Call btrace_maint_clear.
415 (pt_print_packet, btrace_maint_decode_pt)
416 (btrace_maint_update_pt_packets, btrace_maint_update_packets)
417 (btrace_maint_print_packets, get_uint, get_context_size, no_chunk)
418 (maint_btrace_packet_history_cmd)
419 (maint_btrace_clear_packet_history_cmd, maint_btrace_clear_cmd)
420 (maint_btrace_cmd, maint_btrace_set_cmd, maint_btrace_show_cmd)
421 (maint_btrace_pt_set_cmd, maint_btrace_pt_show_cmd)
422 (maint_info_btrace_cmd, _initialize_btrace): New.
423 * btrace.h (btrace_pt_packet, btrace_pt_packet_s)
424 (btrace_maint_packet_history, btrace_maint_info): New.
425 (btrace_thread_info) <maint>: New.
428 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
430 * btrace.c (btrace_fetch): Append the new trace data.
431 (btrace_clear): Clear the stored trace data.
432 * btrace.h (btrace_thread_info) <data>: New.
433 * common/btrace-common.h (btrace_data_clear)
434 (btrace_data_append): New.
435 * common/btrace-common.c (btrace_data_clear)
436 (btrace_data_append): New.
438 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
440 * nat/linux-btrace.c (linux_enable_bts): Check for
442 Check for data_offset and data_size fields. Use them.
444 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
446 * NEWS: Announce new commands "record btrace pt" and "record pt".
447 Announce new options "set|show record btrace pt buffer-size".
448 * btrace.c: Include "rsp-low.h".
449 Include "inttypes.h".
450 (btrace_add_pc): Add forward declaration.
451 (pt_reclassify_insn, ftrace_add_pt, btrace_pt_readmem_callback)
452 (pt_translate_cpu_vendor, btrace_finalize_ftrace_pt)
453 (btrace_compute_ftrace_pt): New.
454 (btrace_compute_ftrace): Support BTRACE_FORMAT_PT.
455 (check_xml_btrace_version): Update version check.
456 (parse_xml_raw, parse_xml_btrace_pt_config_cpu)
457 (parse_xml_btrace_pt_raw, parse_xml_btrace_pt)
458 (btrace_pt_config_cpu_attributes, btrace_pt_config_children)
459 (btrace_pt_children): New.
460 (btrace_children): Add support for "pt".
461 (parse_xml_btrace_conf_pt, btrace_conf_pt_attributes): New.
462 (btrace_conf_children): Add support for "pt".
463 * btrace.h: Include "intel-pt.h".
464 (btrace_pt_error): New.
465 * common/btrace-common.c (btrace_format_string, btrace_data_fini)
466 (btrace_data_empty): Support BTRACE_FORMAT_PT.
467 * common/btrace-common.h (btrace_format): Add BTRACE_FORMAT_PT.
468 (struct btrace_config_pt): New.
469 (struct btrace_config)<pt>: New.
470 (struct btrace_data_pt_config, struct btrace_data_pt): New.
471 (struct btrace_data)<pt>: New.
472 * features/btrace-conf.dtd (btrace-conf)<pt>: New.
474 * features/btrace.dtd (btrace)<pt>: New.
475 (pt, pt-config, cpu): New.
476 * nat/linux-btrace.c (perf_event_read, perf_event_read_all)
477 (perf_event_pt_event_type, kernel_supports_pt)
478 (linux_supports_pt): New.
479 (linux_supports_btrace): Support BTRACE_FORMAT_PT.
480 (linux_enable_bts): Free tinfo on error.
481 (linux_enable_pt): New.
482 (linux_enable_btrace): Support BTRACE_FORMAT_PT.
483 (linux_disable_pt): New.
484 (linux_disable_btrace): Support BTRACE_FORMAT_PT.
485 (linux_fill_btrace_pt_config, linux_read_pt): New.
486 (linux_read_btrace): Support BTRACE_FORMAT_PT.
487 * nat/linux-btrace.h (struct btrace_tinfo_pt): New.
488 (struct btrace_target_info)<pt>: New.
489 * record-btrace.c (set_record_btrace_pt_cmdlist)
490 (show_record_btrace_pt_cmdlist): New.
491 (record_btrace_print_pt_conf): New.
492 (record_btrace_print_conf): Support BTRACE_FORMAT_PT.
493 (btrace_ui_out_decode_error): Support BTRACE_FORMAT_PT.
494 (cmd_record_btrace_pt_start): New.
495 (cmd_record_btrace_start): Support BTRACE_FORMAT_PT.
496 (cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): New.
497 (_initialize_record_btrace): Add new commands.
498 * remote.c (PACKET_Qbtrace_pt, PACKET_Qbtrace_conf_pt_size): New.
499 (remote_protocol_features): Add "Qbtrace:pt".
500 Add "Qbtrace-conf:pt:size".
501 (remote_supports_btrace): Support BTRACE_FORMAT_PT.
502 (btrace_sync_conf): Support PACKET_Qbtrace_conf_pt_size.
503 (remote_enable_btrace): Support BTRACE_FORMAT_PT.
504 (_initialize_remote): Add new commands.
506 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
508 * configure.ac: check for libipt
509 * configure: Regenerate.
510 * config.in: Regenerate.
511 * Makefile.in (LIBIPT): New.
512 (CLIBS): Add $LIBIPT.
513 * NEWS: document new configure options
515 2015-07-02 Jan Kratochvil <jan.kratochvil@redhat.com>
517 * compile/compile-object-load.c (compile_object_load): Replace debug
518 message "lookup undefined ELF symbol" by 3 more specific messages.
520 2015-07-01 Kevin Buettner <kevinb@redhat.com>
522 * rl78-tdep.c (struct gdbarch_tdep): Add new field, rl78_psw_type.
523 (rl78_register_type): Add case for RL78_PSW_REGNUM.
524 (rl78_gdbarch_init): Initialize rl78_psw_type.
526 2015-07-01 Patrick Palka <patrick@parcs.ath.cx>
528 * tui/tui-hooks.c (tui_refresh_frame_and_register_information):
529 Update commentary. Always refresh the registers when frame
530 information has changed.
531 * tui/tui-stack.c (tui_show_frame_info): Update commentary.
532 Change return type to int. Return 1 if frame information has
533 changed, 0 otherwise.
534 (tui_before_prompt): Update commentary.
535 * tui/tui-stack.h (tui_show_frame_info): Change return type to
538 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
541 * frame.c (select_frame): Remove reference to
542 deprecated_selected_frame_level_changed_hook.
543 * frame.h (deprecated_selected_frame_level_changed_hook): Remove
545 * stack.c (deprecated_selected_frame_level_changed_hook):
547 * tui/tui-hooks.c (tui_selected_frame_level_changed_hook):
549 (tui_refresh_frame_and_register_information): ... this. Bail
550 out if there is no stack. Don't update register information
551 unless registers_too_p is true.
552 (tui_print_frame_info_listing_hook): Rename to ...
553 (tui_dummy_print_frame_info_listing_hook): ... this.
554 (tui_before_prompt): New function.
555 (tui_normal_stop): New function.
556 (tui_before_prompt_observer): New observer.
557 (tui_normal_stop_observer): New observer.
558 (tui_install_hooks): Set
559 deprecated_print_frame_info_listing_hook to
560 tui_dummy_print_frame_info_listing_hook. Register
561 tui_before_prompt_observer to call tui_before_prompt and
562 tui_normal_stop_observer to call tui_normal_stop. Remove
563 reference to deprecated_selected_frame_level_changed_hook.
564 (tui_remove_hooks): Detach and unset tui_before_prompt_observer
565 and tui_normal_stop_observer. Remove reference to
566 deprecated_selected_frame_level_changed_hook.
568 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
571 * tui/tui-stack.c (tui_set_locator_info): Change prototype to
572 return an int instead of void. Return whether the locator
574 (tui_show_frame_info): If the locator info has not changed, then
575 bail out early to avoid refreshing the windows.
577 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
579 * tui/tui-stack.c (tui_set_locator_info): Explicitly pass
580 LOCATOR_WIN to tui_alloc_content.
582 2015-06-30 Yao Qi <yao.qi@linaro.org>
585 * arm-tdep.c (arm_get_next_pc_raw): Break for media
588 2015-06-29 Kevin Buettner <kevinb@redhat.com>
590 * rx-tdep.c (RX_PSW_REGNUM): New enum constant.
591 (rx_dwarf_reg_to_regnum): New function.
592 (rx_gdbarch_init): Register rx_dwarf_reg_to_regnum. Use dwarf2
595 2015-06-29 Pedro Alves <palves@redhat.com>
598 * infcall.c (run_inferior_call): On infcall success, if the thread
599 was marked stopped before, reset it back to stopped.
600 * infrun.c (resume): Don't suppress the set_running calls when
602 (normal_stop): Only discard the finish_thread_state cleanup if the
605 2015-06-29 Pierre Langlois <pierre.langlois@arm.com>
607 * MAINTAINERS (Write After Approval): Update my email address.
609 2015-06-26 Keith Seitz <keiths@redhat.com>
610 Doug Evans <dje@google.com>
613 * block.c (block_lookup_symbol): For non-function blocks,
614 continue to search for a symbol with an exact domain match
615 Otherwise, return any previously found "best domain" symbol.
616 (block_lookup_symbol_primary): Likewise.
618 2015-06-26 Patrick Palka <patrick@parcs.ath.cx>
620 * NEWS: Mention the new option "history remove-duplicates".
621 * top.c (history_remove_duplicates): New static variable.
622 (show_history_remove_duplicates): New static function.
623 (gdb_add_history): Conditionally remove duplicate history
625 (init_main): Add "history remove-duplicates" option.
627 2015-06-26 Patrick Palka <patrick@parcs.ath.cx>
629 * tui/tui-win.c (focus_completer): New static function.
630 (_initialize_tui_win): Set the completion function of the
631 "focus" command to focus_completer.
633 2015-06-26 Jan Kratochvil <jan.kratochvil@redhat.com>
635 * linespec.c (minsym_found): Reset sal.PC for COMPUNIT_LOCATIONS_VALID
637 * symtab.c (find_function_start_sal): Likewise.
639 2015-06-25 Gary Benson <gbenson@redhat.com>
641 * solib.c (solib_find_1): Set local variable sysroot to NULL if
642 it is the empty string after trailing slashes have been stripped.
644 2015-06-25 Gary Benson <gbenson@redhat.com>
646 * exec.c (exec_file_locate_attach): Remove gdb_sysroot NULL check.
647 * infrun.c (follow_exec): Likewise.
648 * remote.c (remote_filesystem_is_local): Likewise.
649 * solib.c (solib_find_1): Likewise.
651 2015-06-24 Keith Seitz <keiths@redhat.com>
653 * build-id.c (build_id_to_debug_bfd): Add cleanup to free
654 return value from lrealpath.
656 2015-06-24 Mike Frysinger <vapier@gentoo.org>
658 * remote-sim.c (gdbsim_open): Move sysroot update to the top.
660 2015-06-24 Mike Frysinger <vapier@gentoo.org>
662 * remote-sim.c: Include gdb_bfd.h.
663 (gdbsim_open): Declare new local sysroot pointing to gdb_sysroot.
664 Skip TARGET_SYSROOT_PREFIX in gdb_sysroot when it is active.
666 2015-06-24 Yao Qi <yao.qi@linaro.org>
668 * aarch64-linux-tdep.c (aarch64_linux_init_abi): Don't call
669 set_gdbarch_get_siginfo_type.
670 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Likewise.
671 * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
672 * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
673 * m68klinux-tdep.c (m68k_linux_init_abi): Likewise.
674 * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
675 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
676 * tilegx-linux-tdep.c (tilegx_linux_init_abi): Likewise.
677 * linux-tdep.c (linux_get_siginfo_type): Change it to static.
678 (linux_init_abi): Call set_gdbarch_get_siginfo_type.
679 * linux-tdep.h (linux_get_siginfo_type): Remove the declaration.
681 2015-06-24 Gary Benson <gbenson@redhat.com>
683 * common/buffer.c (stdint.h): Do not include.
684 * common/print-utils.c (stdint.h): Likewise.
685 * compile/compile-c-symbols.c (gdb_assert.h): Likewise.
686 * compile/compile-c-types.c (gdb_assert.h): Likewise.
687 * ft32-tdep.c (gdb_assert.h): Likewise.
688 * guile/scm-utils.c (stdint.h): Likewise.
689 * i386-linux-tdep.c (stdint.h): Likewise.
690 * i386-tdep.c (stdint.h): Likewise.
691 * nat/linux-btrace.c (stdint.h): Likewise.
692 * nat/linux-btrace.h (stdint.h): Likewise.
693 * nat/linux-ptrace.c (stdint.h): Likewise.
694 * nat/mips-linux-watch.h (stdint.h): Likewise.
695 * ppc-linux-nat.c (stdint.h): Likewise.
696 * python/python-internal.h (stdint.h): Likewise.
697 * stub-termcap.c (stdlib.h): Likewise.
698 * target/target.h (stdint.h): Likewise.
699 * xtensa-linux-nat.c (stdint.h): Likewise.
701 2015-06-23 Patrick Palka <patrick@parcs.ath.cx>
703 * top.c (init_history): Look at errno after calling strtol to
704 properly map large GDBHISTSIZE values to infinity.
706 2015-06-23 Doug Evans <dje@google.com>
708 * inferior.h (struct inferior_suspend_state): Delete, unused.
709 All references deleted.
711 2015-06-23 Mike Frysinger <vapier@gentoo.org>
713 * microblaze-tdep.c (microblaze_push_dummy_code): Delete.
714 (microblaze_push_dummy_call): Likewise.
715 (microblaze_gdbarch_init): Delete calls to set_gdbarch_push_dummy_code
716 and set_gdbarch_push_dummy_call.
718 2015-06-23 Yao Qi <yao.qi@linaro.org>
720 * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers):
721 Check whether have_ptrace_getregset is TRIBOOL_TRUE explicitly.
722 (amd64_linux_store_inferior_registers): Likewise.
723 * arm-linux-nat.c (fetch_fpregister): Likewise.
724 (fetch_fpregs, store_fpregister): Likewise.
725 (store_fpregister, store_fpregs): Likewise.
726 (fetch_register, fetch_regs): Likewise.
727 (store_register, store_regs): Likewise.
728 (fetch_vfp_regs, store_vfp_regs): Likewise.
729 (arm_linux_read_description): Check have_ptrace_getregset is
730 TRIBOOL_UNKNOWN. Set have_ptrace_getregset to TRIBOOL_TRUE
732 * i386-linux-nat.c (fetch_xstateregs): Check
733 have_ptrace_getregset is not TRIBOOL_TRUE.
734 (store_xstateregs): Likewise.
735 * linux-nat.c (have_ptrace_getregset): Change its type to
737 * linux-nat.h (tribool): New enum.
738 * x86-linux-nat.c (x86_linux_read_description): Use enum tribool.
739 Check whether have_ptrace_getregset is TRIBOOL_TRUE.
741 2015-06-19 Doug Evans <dje@google.com>
743 * NEWS: Mention Sun's version of stabs is no longer supported.
744 * elfread.c (free_elfinfo): Delete. All uses updated.
745 (elfstab_offset_sections): Delete. All uses updated.
746 * gdb-stabs.h (stab_section_info): Delete. All uses updated.
747 * psympriv.h (partial_symtab) <section_offsets>: Delete.
749 * psymtab.c (start_psymtab_common): Delete arg section_offsets.
752 2015-06-18 Simon Marchi <simon.marchi@ericsson.com>
754 * common/rsp-low.c (needs_escaping): New.
755 (remote_escape_output): Add unit_size parameter. Refactor to
756 support multi-byte addressable units. Rename parameters.
757 * common/rsp-low.h (remote_escape_output): Add unit_size
758 parameter and rename others. Update doc.
759 * remote.c (align_for_efficient_write): New.
760 (remote_write_bytes_aux): Add unit_size parameter and use it.
761 Rename some variables. Update doc.
762 (remote_xfer_partial): Get unit size and use it.
763 (remote_read_bytes_1): Add unit_size parameter and use it.
764 Rename some variables. Update doc.
765 (remote_write_bytes): Same.
766 (remote_xfer_live_readonly_partial): Same.
767 (remote_read_bytes): Same.
768 (remote_flash_write): Update call to remote_write_bytes_aux.
769 (remote_write_qxfer): Update call to remote_escape_output.
770 (remote_search_memory): Same.
771 (remote_hostio_pwrite): Same.
773 2015-06-17 Luis Machado <lgustavo@codesourcery.com>
775 * breakpoint.c (add_location_to_breakpoint): Don't mark permanent
776 locations as inserted.
777 Update and expand comment about permanent locations.
778 (bp_loc_is_permanent): Don't return 0 for bp_call_dummy.
779 Move comment to add_location_to_breakpoint.
780 (update_global_location_list): Don't error out if a permanent
781 breakpoint is not marked inserted.
782 Don't error out if a non-permanent breakpoint location is inserted on
783 top of a permanent breakpoint.
785 2015-06-17 Luis Machado <lgustavo@codesourcery.com>
787 * breakpoint.c (make_breakpoint_permanent): Remove unused
789 * breakpoint.h (make_breakpoint_permanent): Remove declaration.
791 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
794 * NEWS: Mention new GDBHISTSIZE behavior.
795 * top.c (init_history): For null or out-of-range GDBHISTSIZE,
796 set history size to unlimited. Ignore non-numeric GDBHISTSIZE.
798 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
800 * NEWS: Mention that GDBHISTSIZE is read instead of HISTSIZE.
801 * top.c (init_history): Read from GDBHISTSIZE instead of
803 (init_main): Refer to GDBHISTSIZE instead of HISTSIZE.
805 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
807 * top.c (gdb_safe_append_history): Do not call
808 history_truncate_file if the history is not stifled.
810 2015-06-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
812 * syscalls/s390-linux.xml: Add syscalls 344 through 354.
813 * syscalls/s390x-linux.xml: Likewise.
815 2015-06-16 Michael Eager <eager@eagercon.com>
817 * nat/linux-namespaces.c (MSG_CMSG_CLOEXEC): Define if not defined.
819 2015-06-16 Patrick Palka <patrick@parcs.ath.cx>
821 * tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Call
822 target_terminal_ours_for_output() before calling
823 tui_show_frame_info(), and restore the original terminal
826 2015-06-16 Martin Simmons <martin@lispworks.com> (tiny patch)
828 * arm-linux-nat.c: Include nat/linux-ptrace.h.
830 2015-06-15 Simon Marchi <simon.marchi@ericsson.com>
832 * mi/mi-main.c (mi_cmd_data_read_memory_bytes): Consider addressable
834 (mi_cmd_data_write_memory_bytes): Same.
836 2015-06-15 Simon Marchi <simon.marchi@ericsson.com>
838 * corefile.c (write_memory): Update doc.
839 * gdbcore.h (write_memory): Same.
841 2015-06-15 Jan Kratochvil <jan.kratochvil@redhat.com>
843 * linux-tdep.c (enum filterflags): Make it from anonymous enum.
844 (dump_mapping_p): Use it for parameter filterflags.
845 (linux_find_memory_regions_full): Use it for variable filterflags.
847 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
848 Jan Kratochvil <jan.kratochvil@redhat.com>
850 Merge multiple hex conversions.
851 * monitor.c: Include rsp-low.h.
852 (fromhex): Remove definition.
854 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
855 Jan Kratochvil <jan.kratochvil@redhat.com>
857 Move utility functions to common/.
858 * cli/cli-utils.c (skip_spaces, skip_spaces_const, skip_to_space_const):
859 Move defs to common/common-utils.c.
860 * cli/cli-utils.h (skip_spaces, skip_spaces_const, skip_to_space)
861 (skip_to_space_const): Move decls to common/common-utils.h.
862 * common/common-defs.h: Move include of common-types.h before
864 * common/common-utils.c: Include host-defs.h and ctype.h.
865 (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int, strtoulst): Move
867 (skip_spaces, skip_spaces_const, skip_to_space_const): Move from
869 * common/common-utils.h (strtoulst): Move decl from utils.h.
870 (skip_spaces, skip_spaces_const, skip_to_space, skip_to_space_const):
871 Move from cli/cli-utils.h.
872 * common/host-defs.h: Include limits.h.
873 (TARGET_CHAR_BIT, HOST_CHAR_BIT): Moved from defs.h.
874 (skip_spaces, skip_spaces_const): Move decls from cli/cli-utils.h.
875 * defs.h (TARGET_CHAR_BIT, HOST_CHAR_BIT): Move to
876 common/common-utils.h.
877 * utils.c (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int)
878 (strtoulst): Move to common/common-utils.c.
879 * utils.h (strtoulst): Moved decl to common/common-utils.h.
881 2015-06-15 Yao Qi <yao.qi@linaro.org>
883 * data-directory/Makefile.in (SYSCALLS_FILES): Add aarch64-linux.xml.
885 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
887 * build-id.c: Don't include elf-bfd.h.
888 (build_id_bfd_get): Use bfd_build_id.
889 (build_id_verify): Ditto.
891 (find_separate_debug_file_by_buildid): Ditto.
892 * python/py-objfile.c: Don't include elf-bfd.h.
893 (objfpy_get_build_id) Use bfd_build_id.
894 (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto.
895 * coffread.c: Include build-id.h.
896 (coff_symfile_read): Try find_separate_debug_file_by_buildid.
898 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
900 * windows-nat.c (do_windows_fetch_inferior_registers)
901 (handle_output_debug_string): Replace __COPY_CONTEXT_SIZE
902 conditional with __CYGWIN__.
904 2015-06-13 Andrew Burgess <andrew.burgess@embecosm.com>
906 * completer.c: Add arch-utils.h include.
907 (enum reg_completer_targets): New enum.
908 (reg_or_group_completer_1): New function containing old
909 reg_or_group_completer, add and use new parameter to control what
910 is completed on. Use get_current_arch rather than architecture of
911 currently selected frame.
912 (reg_or_group_completer): Call new reg_or_group_completer_1.
913 (reggroup_completer): Call new reg_or_group_completer_1.
914 * completer.h (reggroup_completer): Add declaration.
915 * tui/tui-regs.c: Add 'completer.h' include.
916 (tui_reg_next_command): Renamed to...
917 (tui_reg_next): ...this. Adjust parameters and return rather than
919 (tui_reg_prev_command): Renamed to...
920 (tui_reg_prev): ...this. Adjust parameters and return rather than
922 (tui_reg_float_command): Delete.
923 (tui_reg_general_command): Delete.
924 (tui_reg_system_command): Delete.
925 (tui_reg_command): Rewrite to perform switching of register group.
927 (tuireglist): Remove.
928 (tui_reggroup_completer): New function.
929 (_initialize_tui_regs): Remove 'tui reg' sub-commands, update
930 creation of 'tui reg' command.
931 * NEWS: Add comment about 'tui reg' changes.
933 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
935 * target.c (target_read): Consider addressable unit size when
936 reading from a memory object.
937 (read_memory_robust): Same.
938 (read_whatever_is_readable): Same.
939 (target_write_with_progress): Consider addressable unit size
940 when writing to a memory object.
941 * target.h (target_read): Update documentation.
942 (target_write): Add documentation.
944 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
946 * arch-utils.h (default_addressable_memory_unit_size): New.
947 * arch-utils.c (default_addressable_memory_unit_size): New.
948 * gdbarch.sh (addressable_memory_unit_size): New.
949 * gdbarch.h: Re-generate.
950 * gdbarch.c: Re-generate.
952 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
954 * target.c (target_read): Rename variables and use
956 (target_read_with_progress): Same.
957 (read_memory_robust): Constify parameters and rename
959 (read_whatever_is_readable): Constify parameters,
960 rename variables, adjust formatting.
961 * target.h (read_memory_robust): Constify parameters.
963 2015-06-12 Ulrich Weigand <uweigand@de.ibm.com>
965 * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value_base): Handle short
966 synthetic (non-AltiVec) vector types.
967 (ppc64_sysv_abi_return_value): Likewise.
969 2015-06-12 Antoine Tremblay <antoine.tremblay@ericsson.com>
972 * breakpoint.c (create_breakpoint): Save extra_string for
975 2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
977 * i386-tdep.c (i386_mpx_get_bt_entry): Add a cast for mpx_bd_mask
978 and bt_mask to CORE_ADDR.
980 2015-06-11 Gary Benson <gbenson@redhat.com>
982 * nat/linux-namespaces.c (mnsh_send_message): Use pulongest.
983 (mnsh_recv_message): Likewise.
985 2015-06-11 Walfred Tedeschi <walfred.tedeschi@intel.com>
987 * i386-tdep.c (i386_mpx_print_bounds): use of LONGEST instead of
988 long long int and plongest instead of %ll.
990 2015-06-11 Gary Benson <gbenson@redhat.com>
992 * nat/linux-namespaces.c (gdb_wait.h): New include.
993 (sys/wait.h): Do not include.
995 2015-06-10 Simon Marchi <simon.marchi@ericsson.com>
997 * dwarf2read.c (dwarf_record_line): Call dwarf_record_line if
998 end_sequence is true.
1000 2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1003 * solib-target.c (library_list_start_list): Use explicit NULL
1006 2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1008 * solib-target.c (library_list_start_list): Do not dereference
1009 variable version in its initialization. Make the VERSION check handle
1011 (library_list_attributes): Make "version" GDB_XML_AF_OPTIONAL.
1013 2015-06-10 Gary Benson <gbenson@redhat.com>
1015 * NEWS: Announce support for direct access of executable and
1016 shared library files when attaching to inferiors in containers
1017 on GNU/Linux systems.
1019 2015-06-10 Gary Benson <gbenson@redhat.com>
1021 * remote.c (struct remote_state) <fs_pid>: New field.
1022 (new_remote_state): Initialize the above.
1023 (PACKET_vFile_setfs): New enum value.
1024 (remote_hostio_set_filesystem): New function.
1025 (remote_hostio_open): Call the above.
1026 (remote_hostio_unlink): Likewise.
1027 (remote_hostio_readlink): Likewise.
1028 (_initialize_remote): Register new "set/show remote
1029 hostio-setfs-packet" command.
1030 * NEWS: Announce new vFile:setfs packet.
1032 2015-06-10 Gary Benson <gbenson@redhat.com>
1034 * linux-nat.c (nat/linux-namespaces.h): New include.
1035 (fileio.h): Likewise.
1036 (linux_nat_filesystem_is_local): New function.
1037 (linux_nat_fileio_pid_of): Likewise.
1038 (linux_nat_fileio_open): Likewise.
1039 (linux_nat_fileio_readlink): Likewise.
1040 (linux_nat_fileio_unlink): Likewise.
1041 (linux_nat_add_target): Initialize to_filesystem_is_local,
1042 to_fileio_open, to_fileio_readlink and to_fileio_unlink.
1043 (_initialize_linux_nat): New "set/show debug linux-namespaces"
1045 * NEWS: Mention new "set/show debug linux-namespaces" commands.
1047 2015-06-10 Gary Benson <gbenson@redhat.com>
1049 * target.h (struct inferior): New forward declaration.
1050 (struct target_ops) <to_filesystem_is_local>: Update comment.
1051 (struct target_ops) <to_fileio_open>: New argument inf.
1052 Update comment. All implementations updated.
1053 (struct target_ops) <to_fileio_unlink>: Likewise.
1054 (struct target_ops) <to_fileio_readlink>: Likewise.
1055 (target_filesystem_is_local): Update comment.
1056 (target_fileio_open): New argument inf. Update comment.
1057 (target_fileio_unlink): Likewise.
1058 (target_fileio_readlink): Likewise.
1059 (target_fileio_read_alloc): Likewise.
1060 (target_fileio_read_stralloc): Likewise.
1061 * target.c (target_fileio_open): New argument inf.
1062 Pass inf to implementation. Update debug printing.
1063 (target_fileio_unlink): Likewise.
1064 (target_fileio_readlink): Likewise.
1065 (target_fileio_read_alloc_1): New argument inf. Pass inf
1066 to target_fileio_open.
1067 (target_fileio_read_alloc): New argument inf. Pass inf to
1068 target_fileio_read_alloc_1.
1069 (target_fileio_read_stralloc): Likewise.
1070 * gdb_bfd.c (inferior.h): New include.
1071 (gdb_bfd_iovec_fileio_open): Replace unused "open_closure"
1072 argument with new argument "inferior". Pass inferior to
1074 (gdb_bfd_open): Supply inferior argument to
1075 gdb_bfd_iovec_fileio_open.
1076 * linux-tdep.c (linux_info_proc): Supply inf argument to
1077 relevant target_fileio calls.
1078 (linux_find_memory_regions_full): Likewise.
1079 (linux_fill_prpsinfo): Likewise.
1080 * remote.c (remote_filesystem_is_local): Supply inf
1081 argument to remote_hostio_open.
1082 (remote_file_put): Likewise.
1083 (remote_file_get): Likewise.
1084 (remote_file_delete): Supply inf argument to
1085 remote_hostio_unlink.
1087 2015-06-10 Gary Benson <gbenson@redhat.com>
1089 * inf-child.c (inf_child_fileio_open): Replace comment.
1090 (inf_child_fileio_pwrite): Likewise.
1091 (inf_child_fileio_pread): Likewise.
1092 (inf_child_fileio_fstat): Insert blank line before comment.
1093 (inf_child_fileio_close): Replace comment.
1094 (inf_child_fileio_unlink): Likewise.
1095 (inf_child_fileio_readlink): Likewise.
1096 * remote.c (remote_hostio_open): Likewise.
1097 (remote_hostio_pread): Likewise.
1098 (remote_hostio_pwrite): Likewise.
1099 (remote_hostio_close): Likewise.
1100 (remote_hostio_unlink): Likewise.
1101 (remote_hostio_readlink): Likewise.
1102 (remote_hostio_fstat): Likewise.
1103 (remote_filesystem_is_local): Likewise.
1104 * target.c (target_fileio_open): Likewise.
1105 (target_fileio_pwrite): Likewise.
1106 (target_fileio_pread): Likewise.
1107 (target_fileio_fstat): Insert blank line before comment.
1108 (target_fileio_close): Replace comment.
1109 (target_fileio_unlink): Likewise.
1110 (target_fileio_readlink): Likewise.
1111 (target_fileio_read_alloc): Likewise.
1112 (target_fileio_read_stralloc): Likewise.
1114 2015-06-10 Gary Benson <gbenson@redhat.com>
1116 * linux-thread-db.c (nat/linux-namespaces.h): New include.
1117 (check_pid_namespace_match): Use linux_ns_same rather than
1118 linux_proc_pid_get_ns to spot PID namespace mismatches.
1119 * nat/linux-procfs.h (linux_proc_pid_get_ns): Remove.
1120 * nat/linux-procfs.c (linux_proc_pid_get_ns): Likewise.
1122 2015-06-10 Gary Benson <gbenson@redhat.com>
1124 * configure.ac (AC_CHECK_FUNCS): Add setns.
1125 * config.in: Regenerate.
1126 * configure: Likewise.
1127 * nat/linux-namespaces.h: New file.
1128 * nat/linux-namespaces.c: Likewise.
1129 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-namespaces.h.
1130 (linux-namespaces.o): New rule.
1131 * config/aarch64/linux.mh (NATDEPFILES): Add linux-namespaces.o.
1132 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
1133 * config/arm/linux.mh (NATDEPFILES): Likewise.
1134 * config/i386/linux.mh (NATDEPFILES): Likewise.
1135 * config/i386/linux64.mh (NATDEPFILES): Likewise.
1136 * config/ia64/linux.mh (NATDEPFILES): Likewise.
1137 * config/m32r/linux.mh (NATDEPFILES): Likewise.
1138 * config/m68k/linux.mh (NATDEPFILES): Likewise.
1139 * config/mips/linux.mh (NATDEPFILES): Likewise.
1140 * config/pa/linux.mh (NATDEPFILES): Likewise.
1141 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
1142 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
1143 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
1144 * config/s390/linux.mh (NATDEPFILES): Likewise.
1145 * config/sparc/linux.mh (NATDEPFILES): Likewise.
1146 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
1147 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
1148 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
1150 2015-06-10 Gary Benson <gbenson@redhat.com>
1152 * utils.h (make_cleanup_close): Moved to common/filestuff.h.
1153 * utils.c (do_close_cleanup): Moved to common/filestuff.c.
1154 (make_cleanup_close): Likewise.
1155 * common/filestuff.h (make_cleanup_close): Moved from utils.h.
1156 * common/filestuff.c (do_close_cleanup): Moved from utils.c.
1157 (make_cleanup_close): Likewise.
1159 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
1161 * windows-nat.c (thread_rec): Also ignore ERROR_INVALID_HANDLE
1162 from SuspendThread().
1164 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
1166 * windows-nat.c (handle_output_debug_string): Trim trailing '\n'
1167 from OutputDebugString.
1169 2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
1170 Mircea Gherzan <mircea.gherzan@intel.com>
1172 * i386-tdep.c (MPX_BASE_MASK, MPX_BD_MASK, MPX_BT_MASK, MPX_BD_MASK_32,
1173 MPX_BT_MASK_32): New macros.
1174 (i386_mpx_set_bounds): New function that implements
1175 the command "set-mpx-bound".
1176 (i386_mpx_enabled): Helper function to test MPX availability.
1177 (i386_mpx_bd_base): Helper function to calculate the base directory
1179 (i386_mpx_get_bt_entry): Helper function to access a bound
1181 (i386_mpx_print_bounds): Effectively display bound information.
1182 (_initialize_i386_tdep): Add new commands to commands "set mpx" and
1184 (_initialize_i386_tdep):
1185 Add "bound" to the commands "show mpx" and "set mpx" commands.
1186 (mpx_set_cmdlist and mpx_show_cmdlist): List for the new prefixed "set mpx"
1187 and "show mpx" commands.
1188 * NEWS: List new commands for MPX support.
1190 2015-06-09 Gary Benson <gbenson@redhat.com>
1192 * common/fileio.h (fileio_to_host_mode): New declaration.
1193 * common/fileio.c (fileio_to_host_mode): New Function.
1194 * inf-child.c (inf_child_fileio_open): Process mode argument
1195 with fileio_to_host_mode.
1197 2015-06-09 Gary Benson <gbenson@redhat.com>
1199 * common/fileio.c (fileio_mode_pack): Fix preprocessor
1202 2015-06-05 Gary Benson <gbenson@redhat.com>
1204 * gdb_bfd.c (gdb_bfd_open): Move vgdb special case to...
1205 * remote.c (remote_filesystem_is_local): ...here.
1207 2015-06-04 Yao Qi <yao.qi@linaro.org>
1209 * gdbarch.c: Regenerate it.
1211 2015-06-03 Jan Kratochvil <jan.kratochvil@redhat.com>
1213 * arch-utils.c (default_infcall_munmap): New.
1214 * arch-utils.h (default_infcall_munmap): New declaration.
1215 * compile/compile-object-load.c (struct munmap_list, munmap_list_add)
1216 (munmap_list_free, munmap_listp_free_cleanup): New.
1217 (struct setup_sections_data): Add field munmap_list_headp.
1218 (setup_sections): Call munmap_list_add.
1219 (compile_object_load): New variable munmap_list_head, initialize
1220 setup_sections_data.munmap_list_headp, return munmap_list_head.
1221 * compile/compile-object-load.h (struct munmap_list): New declaration.
1222 (struct compile_module): Add field munmap_list_head.
1223 (munmap_list_free): New declaration.
1224 * compile/compile-object-run.c (struct do_module_cleanup): Add field
1226 (do_module_cleanup): Call munmap_list_free.
1227 (compile_object_run): Pass munmap_list_head to do_module_cleanup.
1228 * gdbarch.c: Regenerate.
1229 * gdbarch.h: Regenerate.
1230 * gdbarch.sh (infcall_munmap): New.
1231 * linux-tdep.c (linux_infcall_munmap): New.
1232 (linux_init_abi): Install it.
1234 2015-06-02 Simon Marchi <simon.marchi@ericsson.com>
1237 * inferior.c (detach_inferior): Call exit_inferior_1 with silent = 0.
1239 2015-06-02 Yao Qi <yao.qi@linaro.org>
1241 * i386-linux-nat.c: Include linux-nat.h.
1243 2015-06-01 Andreas Schwab <schwab@linux-m68k.org>
1244 Jan Kratochvil <jan.kratochvil@redhat.com>
1247 * dwarf2-frame-tailcall.c (pretended_chain_levels): Correct
1249 * dwarf2loc.c (chain_candidate): Likewise.
1251 2015-06-01 Yao Qi <yao.qi@linaro.org>
1253 * arm-linux-nat.c (fetch_vfp_regs): Use PTRACE_GETREGSET.
1254 (store_vfp_regs): Use PTRACE_SETREGSET.
1256 2015-06-01 Yao Qi <yao.qi@linaro.org>
1258 * arm-linux-nat.c (fetch_fpregister): Use PTRACE_GETREGSET.
1259 (fetch_fpregs): Likewise.
1260 * arm-linux-nat.c (store_fpregister): Use PTRACE_SETREGSET.
1261 (store_fpregs): Likewise.
1263 2015-06-01 Yao Qi <yao.qi@linaro.org>
1265 * arm-linux-nat.c (fetch_register): Use PTRACE_GETREGSET.
1266 (fetch_regs): Likewise.
1267 (store_regs): Use PTRACE_SETREGSET.
1268 (store_register): Likewise.
1270 2015-06-01 Yao Qi <yao.qi@linaro.org>
1272 * arm-linux-nat.c (arm_linux_read_description): Check whether
1273 kernel supports PTRACE_GETREGSET.
1275 2015-06-01 Yao Qi <yao.qi@linaro.org>
1277 * x86-linux-nat.c (have_ptrace_getregset): Move it to ...
1278 * linux-nat.c: ... here.
1279 * x86-linux-nat.h (have_ptrace_getregset): Move the declaration
1281 * linux-nat.h: ... here.
1283 2015-06-01 Yao Qi <yao.qi@linaro.org>
1285 * amd64-linux-nat.c: Include "nat/linux-ptrace.h".
1286 * i386-linux-nat.c: Likewise.
1287 * nat/linux-ptrace.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Define.
1288 * s390-linux-nat.c: Include "nat/linux-ptrace.h".
1289 (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
1290 * x86-linux-nat.c: Include "nat/linux-ptrace.h".
1291 * x86-linux-nat.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
1293 2015-05-30 Eli Zaretskii <eliz@gnu.org>
1295 * go32-nat.c (go32_xfer_memory): Fix the return value to be
1296 compatible to what read_child and write_child return. This
1297 unbreaks that DJGPP build of GDB which was broken since v7.7.
1299 2015-05-29 Martin Galvan <martin.galvan@tallertechnologies.com>
1301 * MAINTAINERS (Write After Approval): Add Martin Galvan.
1303 2015-05-29 Roland McGrath <mcgrathr@google.com>
1306 * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Use warning
1307 rather than internal_error for an unrecognized value.
1309 2015-05-29 Max Filippov <jcmvbkbc@gmail.com>
1311 * xtensa-tdep.c (xtensa_pseudo_register_read)
1312 (xtensa_pseudo_register_write): Don't alias last pseudo register
1315 2015-05-28 Don Breazeal <donb@codesourcery.com>
1317 * infrun.c (follow_fork_inferior): Ensure the use of
1318 process-style ptids (pid,0,0) in verbose/debug "Detaching"
1321 2015-05-28 Doug Evans <dje@google.com>
1323 * dwarf2read.c (record_line_ftype): Remove, duplicate.
1325 2015-05-28 Yao Qi <yao.qi@linaro.org>
1327 * arm-linux-nat.c (arm_linux_has_wmmx_registers): Remove.
1328 (arm_linux_fetch_inferior_registers): Use
1329 tdep->have_wmmx_registers instead of arm_linux_has_wmmx_registers.
1330 (arm_linux_store_inferior_registers): Likewise.
1331 (arm_linux_read_description): Don't set
1332 arm_linux_has_wmmx_registers.
1333 * arm-tdep.c (arm_gdbarch_init): Set
1334 tdep->have_wmmx_registers according target descriptions.
1335 * arm-tdep.h (struct gdbarch_tdep) <have_wmmx_registers>: New
1338 2015-05-28 Yao Qi <yao.qi@linaro.org>
1340 * arm-linux-nat.c (arm_linux_vfp_register_count): Remove.
1341 (fetch_vfp_regs): Use vfp_register_count from gdbarch_tdep
1342 instead of arm_linux_vfp_register_count.
1343 (store_vfp_regs): Likewise.
1344 (arm_linux_fetch_inferior_registers): Likewise.
1345 (arm_linux_store_inferior_registers): Likewise.
1346 (arm_linux_read_description): Don't set
1347 arm_linux_vfp_register_count.
1348 * arm-linux-tdep.c (arm_linux_iterate_over_regset_sections):
1350 * arm-tdep.c (arm_gdbarch_init): Add assert on
1352 * arm-tdep.h (struct gdbarch_tdep) <have_vfp_registers>: Rename
1353 field to vfp_register_count. All users updated.
1355 2015-05-28 Kyle Huey <me@kylehuey.com> (tiny patch)
1357 * gdb/arm-tdep.c (arm_gdbarch_init): Perform arm_abi detection on
1358 ELFOSABI_GNU binaries.
1360 2015-05-27 Doug Evans <dje@google.com>
1362 * dwarf2read.c (lnp_state_machine): New typedef.
1363 (lnp_reader_state): New typedef.
1364 (dwarf_record_line_1): Renamed from dwarf_record_line.
1365 All callers updated.
1366 (dwarf_record_line): New function.
1367 (init_lnp_state_machine): New function.
1368 (check_line_address): Replace p_record_line parameter with state.
1369 All callers updated.
1370 (dwarf_decode_lines_1): Call dwarf_record_line, init_lnp_state_machine.
1371 Update to record state in lnp_state_machine.
1373 2015-05-27 Doug Evans <dje@google.com>
1375 * dwarf2read.c (record_line_ftype): New typedef.
1376 (check_line_address): New function.
1377 (dwarf_decode_lines_1): Call it.
1379 2015-05-27 Doug Evans <dje@google.com>
1381 * NEWS: Mention "set debug dwarf-line".
1382 * dwarf2read.c (dwarf_line_debug): New static global.
1383 (add_include_dir): Add debug dwarf-line support.
1384 (add_file_name, dwarf_record_line, dwarf_finish_line): Ditto.
1385 (_initialize_dwarf2_read): New parameter "debug dwarf-line".
1387 2015-05-27 Doug Evans <dje@google.com>
1389 * cp-namespace.c (cp_lookup_nested_symbol): New arg "domain".
1390 All callers updated.
1391 (cp_lookup_nested_symbol_1, find_symbol_in_baseclass): Ditto.
1392 * cp-support.h (cp_lookup_nested_symbol): Update.
1394 2015-05-27 Doug Evans <dje@google.com>
1397 * block.c (block_find_symbol): New function.
1398 (block_find_non_opaque_type): Ditto.
1399 (block_find_non_opaque_type_preferred): Ditto.
1400 * block.h (block_symbol_matcher_ftype): New typedef.
1401 (block_find_symbol): Declare.
1402 (block_find_non_opaque_type): Ditto.
1403 (block_find_non_opaque_type_preferred): Ditto.
1404 * dwarf2read.c (dw2_lookup_symbol): Call block_find_symbol.
1405 * psymtab.c (psym_lookup_symbol): Ditto.
1406 * symtab.c (basic_lookup_transparent_type_1): New function.
1407 (basic_lookup_transparent_type): Call it.
1409 2015-05-27 Yao Qi <yao.qi@linaro.org>
1411 * aarch64-tdep.c (aarch64_record_data_proc_simd_fp): Return
1412 AARCH64_RECORD_UNKNOWN for unknown instruction encoding.
1414 2015-05-27 Yao Qi <yao.qi@linaro.org>
1416 * aarch64-tdep.c (aarch64_record_branch_except_sys): Split lines
1418 (aarch64_record_load_store): Likewise.
1420 2015-05-26 Doug Evans <dje@google.com>
1422 PR c++/18141, c++/18417.
1423 * cp-support.c (cp_lookup_rtti_type): Handle the case of NAME being
1426 2015-05-26 Doug Evans <dje@google.com>
1428 * NEWS: Add entries for command renamings.
1429 * dwarf2read.c (dwarf_read_debug): Renamed from dwarf2_read_debug.
1431 (dwarf_die_debug): Renamed from dwarf2_die_debug. All uses updated.
1432 (dwarf_max_cache_age): Renamed from dwarf2_max_cache_age.
1434 (show_dwarf_max_cache_age): Renamed from show_dwarf2_max_cache_age.
1435 All callers updated. Fix spelling of DWARF in help text.
1436 (set_dwarf_cmdlist): Renamed from set_dwarf2_cmdlist.
1438 (show_dwarf_cmdlist): Renamed from show_dwarf2_cmdlist.
1440 (set_dwarf_cmd): Renamed from set_dwarf2_cmd. All callers updated.
1441 (show_dwarf_cmd): Renamed from show_dwarf2_cmd. All callers updated.
1442 (dwarf_always_disassemble): Renamed from dwarf_always_disassemble.
1444 (show_dwarf_always_disassemble): Renamed from
1445 show_dwarf2_always_disassemble. All callers updated.
1446 (_initialize_dwarf2_read): Rename "set/show dwarf2" prefix to
1447 "set/show dwarf". Rename "set/show dwarf2 max-cache-age" to
1448 "set/show dwarf max-cache-age". Rename
1449 "set/show dwarf2 always-disassemble" to
1450 "set/show dwarf always-disassemble". Rename
1451 "set/show debug dwarf2-read" to "set/show debug dwarf-read". Rename
1452 "set/show debug dwarf2-die" to "set/show debug dwarf-die".
1454 2015-05-26 Doug Evans <dje@google.com>
1457 * python/py-lazy-string.c (stpy_convert_to_value): Use
1458 gdbpy_gdb_memory_error not PyExc_MemoryError.
1459 (gdbpy_create_lazy_string_object): Ditto.
1461 2015-05-26 Andrew Burgess <andrew.burgess@embecosm.com>
1463 * tui/tui-regs.c (tui_reg_next_command): Compare against NULL.
1465 2015-05-26 Andrew Burgess <andrew.burgess@embecosm.com>
1467 * tui/tui-regs.c (tui_reg_prev_command): New function.
1468 (_initialize_tui_regs): Add 'prev' command for 'tui reg'.
1469 * reggroups.c (reggroup_prev): New function.
1470 * reggroups.h (reggroup_prev): Add declaration. Update comment.
1472 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
1473 Yao Qi <yao.qi@linaro.org>
1475 * aarch64-linux-tdep.c: Include linux-record.h and
1477 (struct linux_record_tdep aarch64_linux_record_tdep): Declare.
1478 (aarch64_syscall): New enum.
1479 (aarch64_canonicalize_syscall): New function.
1480 (aarch64_all_but_pc_registers_record): New function.
1481 (aarch64_linux_syscall_record): New function.
1482 (aarch64_linux_init_abi): Install AArch64 process record
1483 handler. Update to handle syscall recording.
1484 * aarch64-tdep.c: Include record.h and record-full.h.
1485 (submask, bit, bits, REG_ALLOC, MEM_ALLOC): New macros.
1486 (struct aarch64_mem_r): Define.
1487 (aarch64_record_result): New enum.
1488 (struct insn_decode_record): Define.
1489 (insn_decode_record): New typedef.
1490 (aarch64_record_data_proc_reg): New function.
1491 (aarch64_record_data_proc_imm): New function.
1492 (aarch64_record_branch_except_sys): New function.
1493 (aarch64_record_load_store): New function.
1494 (aarch64_record_data_proc_simd_fp): New function.
1495 (aarch64_record_asimd_load_store): New function.
1496 (aarch64_record_decode_insn_handler): New function.
1497 (deallocate_reg_mem): New function.
1498 (aarch64_process_record): New function.
1499 * aarch64-tdep.h (struct gdbarch_tdep) <aarch64_syscall_record>:
1501 (aarch64_process_record): New extern declaration.
1502 * configure.tgt: Add linux-record.o to gdb_target_obs.
1503 * linux-record.h (struct linux_record_tdep) <arg7>: New field.
1505 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
1507 * NEWS: Add a note on process record-replay support on aarch64*-linux*
1510 2015-05-26 Martin Galvan <martin.galvan@tallertechnologies.com>
1512 * amd64-tdep.c: Replace in_function_epilogue_p with
1513 stack_frame_destroyed_p throughout.
1514 * arch-utils.c: Ditto.
1515 * arch-utils.h: Ditto.
1516 * arm-tdep.c: Ditto.
1517 * breakpoint.c: Ditto.
1518 * gdbarch.sh: Ditto.
1519 * hppa-tdep.c: Ditto.
1520 * i386-tdep.c: Ditto.
1521 * mips-tdep.c: Ditto.
1522 * nios2-tdep.c: Ditto.
1523 * rs6000-tdep.c: Ditto.
1524 * s390-linux-tdep.c: Ditto.
1525 * score-tdep.c: Ditto.
1527 * sparc-tdep.c: Ditto.
1528 * sparc-tdep.h: Ditto.
1529 * sparc64-tdep.c: Ditto.
1530 * spu-tdep.c: Ditto.
1531 * tic6x-tdep.c: Ditto.
1532 * tilegx-tdep.c: Ditto.
1533 * xstormy16-tdep.c: Ditto.
1534 * gdbarch.c, gdbarch.h: Re-generated.
1536 2015-05-22 Andrew Burgess <andrew.burgess@embecosm.com>
1538 * NEWS: Mention 'tui enable' and 'tui disable'.
1539 * tui/tui.c (tui_enable_command): New function.
1540 (tui_disable_command): New function.
1541 (_initialize_tui): New function.
1543 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
1545 * tui/tui-regs.c (tui_reg_next_command): Use NULL not 0.
1547 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
1549 * tui/tui-layout.c (tui_set_layout_for_display_command): Ensure
1552 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
1554 * tui/tui-layout.c (tui_layout_command): Move call to tui_enable
1556 (tui_set_layout_for_display_command): ...here, before calling
1557 tui_set_layout. Only set the layout if gdb has not already
1558 entered the TUI_FAILURE state.
1560 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
1562 * tui/tui-layout.c (layout_completer): New function.
1563 (_initialize_tui_layout): Set completer on layout command.
1565 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
1567 * tui/tui-layout.c (tui_set_layout): Remove
1568 tui_register_display_type parameter. Remove all checking of this
1569 parameter, and reindent function. Update header comment.
1570 (tui_set_layout_for_display_command): Rename to...
1571 (tui_set_layout_by_name): ...this, and don't check for different
1572 register class types, don't pass a tui_register_display_type to
1573 tui_set_layout. Update header comment.
1574 (layout_names): Remove register set specific names.
1575 * tui/tui-layout.h (tui_set_layout): Remove
1576 tui_register_display_type parameter.
1577 * tui/tui.c (tui_rl_change_windows): Don't pass a
1578 tui_register_display_type to tui_set_layout.
1579 (tui_rl_delete_other_windows): Likewise.
1580 (tui_enable): Likewise.
1581 * tui/tui-data.h (TUI_FLOAT_REGS_NAME): Remove.
1582 (TUI_FLOAT_REGS_NAME_LOWER): Remove.
1583 (TUI_GENERAL_REGS_NAME): Remove.
1584 (TUI_GENERAL_REGS_NAME_LOWER): Remove.
1585 (TUI_SPECIAL_REGS_NAME): Remove.
1586 (TUI_SPECIAL_REGS_NAME_LOWER): Remove.
1587 (TUI_GENERAL_SPECIAL_REGS_NAME): Remove.
1588 (TUI_GENERAL_SPECIAL_REGS_NAME_LOWER): Remove.
1589 (enum tui_register_display_type): Remove.
1590 (struct tui_layout_def): Remove regs_display_type and
1591 float_regs_display_type fields.
1592 (struct tui_data_info): Remove regs_display_type field.
1593 (tui_layout_command): Use new name for
1594 tui_set_layout_for_display_command.
1595 * tui/tui-data.c (layout_def): Don't initialise removed fields.
1596 (tui_clear_win_detail): Don't initialise removed fields of
1598 * tui/tui-regs.c (tui_show_registers): Use new name for
1599 tui_set_layout_for_display_command.
1600 * tui/tui.h (tui_set_layout_for_display_command): Rename
1602 (tui_set_layout_by_name): ...this.
1603 * printcmd.c (display_command): Remove tui related layout call,
1606 2015-05-20 Joel Brobecker <brobecker@adacore.com>
1608 * infrun.c (handle_inferior_event_1): Renames handle_inferior_event.
1609 (handle_inferior_event): New function.
1611 2015-05-20 Joel Brobecker <brobecker@adacore.com>
1613 * ada-lang.c (to_fixed_array_type): Rename local variable
1614 typename into type_name.
1616 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
1618 Fix ASAN crash for gdb.compile/compile.exp.
1619 * infcall.c (call_function_by_hand_dummy): Use xstrdup for NAME.
1621 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
1623 * compile/compile-c-symbols.c (convert_symbol_sym, gcc_convert_symbol)
1624 (gcc_symbol_address): Change gdb_stdout to gdb_stdlog.
1625 * compile/compile-object-load.c (setup_sections, compile_object_load):
1627 * compile/compile.c (compile_to_object): Likewise.
1629 2015-05-16 Doug Evans <xdje42@gmail.com>
1631 * NEWS: Mention support for unbuffered Guile memory ports.
1632 * scm-ports.c (ioscm_memory_port): Update comments on end, size.
1633 (ioscm_lseek_address): Improve overflow calculation.
1634 (gdbscm_memory_port_fill_input): Add assert.
1635 (gdbscm_memory_port_write): Handle unbuffered ports.
1636 Handle large writes identical to Guile's fport_write.
1637 (gdbscm_memory_port_seek): Fix seeking past end check.
1638 (gdbscm_memory_port_close): Handle closing unbuffered port.
1639 (ioscm_parse_mode_bits): Recognize "0" for unbuffered ports.
1640 (ioscm_init_memory_port): Handle unbuffered ports.
1641 (ioscm_reinit_memory_port): Ditto.
1642 (ioscm_init_memory_port): Update size calculation.
1643 (gdbscm_open_memory): Support zero sized ports.
1645 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1647 * compile/compile-object-load.c (get_out_value_type): Fix uninitialized
1648 variable compiler warnings.
1650 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1652 * compile/compile-object-load.c (get_out_value_type): Fix returned type.
1654 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1655 Phil Muldoon <pmuldoon@redhat.com>
1657 * NEWS (Changes since GDB 7.9): Add compile print.
1658 * compile/compile-c-support.c (add_code_header, add_code_footer)
1659 (c_compute_program): Add COMPILE_I_PRINT_ADDRESS_SCOPE and
1660 COMPILE_I_PRINT_VALUE_SCOPE.
1661 * compile/compile-internal.h (COMPILE_I_PRINT_OUT_ARG_TYPE)
1662 (COMPILE_I_PRINT_OUT_ARG, COMPILE_I_EXPR_VAL, COMPILE_I_EXPR_PTR_TYPE):
1664 * compile/compile-object-load.c: Include block.h.
1665 (get_out_value_type): New function.
1666 (compile_object_load): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
1667 COMPILE_I_PRINT_VALUE_SCOPE. Set compile_module's OUT_VALUE_ADDR and
1669 * compile/compile-object-load.h (struct compile_module): Add fields
1670 out_value_addr and out_value_type.
1671 * compile/compile-object-run.c: Include valprint.h and compile.h.
1672 (struct do_module_cleanup): Add fields out_value_addr and
1674 (do_module_cleanup): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
1675 COMPILE_I_PRINT_VALUE_SCOPE.
1676 (compile_object_run): Propagate out_value_addr and out_value_type.
1677 Pass OUT_VALUE_ADDR.
1678 * compile/compile.c: Include valprint.h.
1679 (compile_print_value, compile_print_command): New functions.
1680 (eval_compile_command): Handle failed COMPILE_I_PRINT_ADDRESS_SCOPE.
1681 (_initialize_compile): Update compile code help text. Install
1682 compile_print_command.
1683 * compile/compile.h (compile_print_value): New prototype.
1684 * defs.h (enum compile_i_scope_types): Add
1685 COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE.
1687 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1689 * compile/compile-object-load.c (get_regs_type): Add parameter func_sym.
1690 Rely on its parameter count.
1691 (compile_object_load): Replace lookup_minimal_symbol_text by
1692 lookup_global_symbol_from_objfile. Verify FUNC_SYM. Set it in the
1694 * compile/compile-object-load.h (struct compile_module): Replace
1695 func_addr by func_sym.
1696 * compile/compile-object-run.c: Include block.h.
1697 (compile_object_run): Reset module variable after it is freed. Use
1698 FUNC_SYM instead of FUNC_ADDR. Rely on it.
1700 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1702 * compile/compile-c-support.c (print_one_macro): Use #ifndef.
1703 (generate_register_struct): Use __gdb_uintptr for TYPE_CODE_PTR.
1704 (c_compute_program): Call generate_register_struct after typedefs.
1705 * compile/compile-loc2c.c (push, pushf_register_address)
1706 (pushf_register): Cast to GCC_UINTPTR.
1707 (do_compile_dwarf_expr_to_c): Use unused attribute. Add space after
1708 type. Use GCC_UINTPTR instead of void *. Remove excessive cast.
1709 (compile_dwarf_expr_to_c): Use GCC_UINTPTR instead of void *.
1710 * compile/compile.c (_initialize_compile): Enable warnings for
1713 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1715 * cli/cli-script.c (execute_control_command): Update
1716 eval_compile_command caller.
1717 * compile/compile-object-load.c (compile_object_load): Add parameters
1718 scope and scope_data. Set them.
1719 * compile/compile-object-load.h (struct compile_module): Add fields
1720 scope and scope_data.
1721 (compile_object_load): Add parameters scope and scope_data.
1722 * compile/compile-object-run.c (struct do_module_cleanup): Add fields
1723 scope and scope_data.
1724 (compile_object_run): Propagate the fields scope and scope_data.
1725 * compile/compile.c (compile_file_command, compile_code_command):
1726 Update eval_compile_command callers.
1727 (eval_compile_command): Add parameter scope_data. Pass it plus scope.
1728 * compile/compile.h (eval_compile_command): Add parameter scope_data.
1729 * defs.h (struct command_line): Add field scope_data.
1731 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1733 * printcmd.c (struct format_data): Move it to valprint.h.
1734 (print_command_parse_format, print_value): New functions from ...
1735 (print_command_1): ... here. Call them.
1736 * valprint.h (struct format_data): Move it here from printcmd.c.
1737 (print_command_parse_format, print_value): New declarations.
1739 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1741 * compile/compile-object-load.c (compile_object_load): Add
1742 COMPILE_DEBUG message.
1744 2015-05-15 Jerome Guitton <guitton@adacore.com>
1746 * ada-lang.c (ada_value_ptr_subscript): Use enum position of
1747 index to get element instead of enum value.
1748 (ada_value_slice_from_ptr, ada_value_slice): Use enum position
1749 of index to compute length, but enum values to compute bounds.
1750 (ada_array_length): Use enum position of index instead of enum value.
1751 (pos_atr): Move position computation to...
1752 (ada_evaluate_subexp): Use enum values to compute bounds.
1753 * gdbtypes.c (discrete_position): ...this new function.
1754 * gdbtypes.h (discrete_position): New function declaration.
1755 * valprint.c (val_print_array_elements): Call discrete_position
1756 to handle array indexed by non-contiguous enumeration types.
1758 2015-05-15 Jerome Guitton <guitton@adacore.com>
1760 * ada-lang.c (find_parallel_type_by_descriptive_type):
1761 Go through typedefs during lookup.
1762 (to_fixed_array_type): Add support for non-bit packed arrays
1763 as variable-length fields.
1765 2015-05-15 Pedro Alves <palves@redhat.com>
1766 Simon Marchi <simon.marchi@ericsson.com>
1768 * event-loop.c (gdb_notifier) <next_file_handler,
1769 next_poll_fds_index>: New fields.
1770 (get_next_file_handler_to_handle_and_advance): New function.
1771 (delete_file_handler): If deleting the next file handler to
1772 handle, advance to the next file handler.
1773 (gdb_wait_for_event): Bail early if no event fired. Poll file
1774 handlers in round-robin fashion.
1776 2015-05-15 Pedro Alves <palves@redhat.com>
1778 * linux-tdep.c (linux_find_memory_regions_full): Rename local
1779 'private' to 'priv'.
1781 2015-05-15 Pedro Alves <palves@redhat.com>
1783 * nat/linux-nat.h: Include "target/waitstatus.h".
1785 2015-05-15 Yuanhui Zhang <asmwarrior@gmail.com>
1787 * python/py-unwind.c (struct reg_info): Move out of ...
1788 (struct cached_frame_info): ... this scope.
1789 (pending_frame_object_type, unwind_info_object_type): Make extern.
1791 2015-05-15 Joel Brobecker <brobecker@adacore.com>
1793 * ada-lang.c (ada_value_primitive_packed_val): Make sure
1794 accumSize is never negative.
1796 2015-05-14 Patrick Palka <patrick@parcs.ath.cx>
1798 * tui/tui-command.c: Remove include of <ctype.h>.
1799 (tui_dispatch_ctrl_char): Remove workaround for xterm terminals.
1801 2015-05-13 Martin Galvan <martin.galvan@tallertechnologies.com>
1803 * dwarf2read.c (die_needs_namespace): Return 1 for
1804 DW_TAG_inlined_subroutine.
1806 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1808 * regcache.c (regcache_cpy_no_passthrough): New declaration.
1809 (regcache_cpy_no_passthrough): Make it static, add function comment.
1810 * regcache.h (regcache_dup, regcache_cpy): Reduce/update their comment.
1811 (regcache_cpy_no_passthrough): Remove declaration.
1813 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1815 * gdbthread.h (struct thread_control_state): Update comment for
1817 * infcall.c (run_inferior_call): Update comment about
1819 * infcmd.c (get_return_value): Update comment about stop_registers.
1820 (finish_forward): Update comment about proceed_to_finish.
1821 * infrun.c (stop_registers): Remove.
1822 (clear_proceed_status, normal_stop): Remove stop_registers handling.
1823 * infrun.h (stop_registers): Remove.
1825 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1827 * infcall.c (struct dummy_frame_context_saver)
1828 (dummy_frame_context_saver_data_free, dummy_frame_context_saver_dtor)
1829 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
1830 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
1832 (call_function_by_hand_dummy): Move discard_cleanups of
1833 inf_status_cleanup before dummy_frame_push. Call
1834 dummy_frame_context_saver_setup and prepare context_saver_cleanup.
1835 Use dummy_frame_context_saver_get_regs instead of stop_registers.
1836 * infcall.h (struct dummy_frame_context_saver)
1837 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
1838 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
1840 * infcmd.c: Include infcall.h.
1841 (get_return_value): Add parameter ctx_saver, use it instead of
1843 (print_return_value): Add parameter ctx_saver, pass it.
1844 (struct finish_command_continuation_args): Add field ctx_saver.
1845 (finish_command_continuation): Update print_return_value caller.
1846 (finish_command_continuation_free_arg): Free also ctx_saver.
1847 (finish_forward): Call dummy_frame_context_saver_setup.
1848 * inferior.h (struct dummy_frame_context_saver): New declaration.
1849 (get_return_value): Add parameter ctx_saver.
1850 * python/py-finishbreakpoint.c (bpfinishpy_pre_stop_hook): Update
1851 get_return_value caller.
1853 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1855 * dummy-frame.c (struct dummy_frame_dtor_list): New.
1856 (struct dummy_frame): Replace dtor and dtor_data by dtor_list.
1857 (remove_dummy_frame): Process dtor_list.
1858 (pop_dummy_frame): Process dtor_list.
1859 (register_dummy_frame_dtor): Maintain dtor_list.
1860 (find_dummy_frame_dtor): Handle dtor_list.
1861 * dummy-frame.h (register_dummy_frame_dtor, find_dummy_frame_dtor):
1864 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1866 * compile/compile-object-run.c (do_module_cleanup): Add parameter
1868 (compile_object_run): Update do_module_cleanup caller.
1869 * dummy-frame.c: Include infcall.h.
1870 (struct dummy_frame): Update dtor comment.
1871 (remove_dummy_frame): Call dtor.
1872 (pop_dummy_frame): Update dtor caller.
1873 * dummy-frame.h (dummy_frame_dtor_ftype): Add parameter
1876 2015-05-13 Joel Brobecker <brobecker@adacore.com>
1880 2015-05-13 Joel Brobecker <brobecker@adacore.com>
1882 * NEWS: Create "Changes in GDB 7.9.1" section. Move news about
1883 Xmethods now being able to specify a result type to that new
1886 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
1888 * tui/tui-win.c (tui_async_resize_screen): Clear win_resized
1889 first before resizing the window.
1890 * tui/tui.c (tui_enable): Likewise.
1892 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1894 * dummy-frame.c (struct dummy_frame): Use proper typedef for dtor.
1895 * dummy-frame.h (dummy_frame_dtor_ftype): Add its comment.
1896 * infcall.c (call_function_by_hand_dummy): Use proper typedef for
1897 dummy_dtor parameter.
1898 * infcall.h: Include dummy-frame.h.
1899 (call_function_by_hand_dummy_dtor_ftype): Remove.
1900 (call_function_by_hand_dummy): Use proper typedef for dummy_dtor
1903 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
1906 * top.c (history_size_setshow_var): Change type to signed.
1907 Initialize to -2. Update documentation.
1908 (set_readline_history_size): Define.
1909 (set_history_size_command): Use it. Remove logic for handling
1911 (init_history): Use set_readline_history_size(). Test for a
1912 value of -2 instead of 0 when determining whether to set a
1913 default history size.
1914 (init_main): Decode the argument of the "size" command as a
1915 zuinteger_unlimited.
1917 2015-05-12 Doug Evans <dje@google.com>
1919 * dwarf2read.c (struct file_entry): Tweak comments.
1920 (get_debug_line_section): Tweak comments.
1922 2015-05-12 Don Breazeal <donb@codesourcery.com>
1924 * NEWS: Announce fork support in the RSP and support
1925 for fork debugging in extended mode.
1927 2015-05-12 Don Breazeal <donb@codesourcery.com>
1929 * remote.c (remote_insert_fork_catchpoint): New function.
1930 (remote_remove_fork_catchpoint): New function.
1931 (remote_insert_vfork_catchpoint): New function.
1932 (remote_remove_vfork_catchpoint): New function.
1933 (pending_fork_parent_callback): New function.
1934 (remove_new_fork_child): New function.
1935 (remote_update_thread_list): Call remote_notif_get_pending_events
1936 and remove_new_fork_child.
1937 (extended_remote_kill): Kill fork child when killing the
1938 parent before follow_fork completes.
1939 (init_extended_remote_ops): Initialize target vector with
1940 new fork catchpoint functions.
1942 2015-05-12 Don Breazeal <donb@codesourcery.com>
1944 * remote.c (remove_vfork_event_p): New function.
1945 (remote_follow_fork): Add vfork event type to event checking.
1946 (remote_parse_stop_reply): New stop reasons "vfork" and
1947 "vforkdone" for RSP 'T' Stop Reply Packet.
1949 2015-05-12 Don Breazeal <donb@codesourcery.com>
1951 * linux-nat.c (linux_nat_ptrace_options): New function.
1952 (linux_init_ptrace, wait_lwp, linux_nat_filter_event):
1953 Call linux_nat_ptrace_options and use different argument to
1954 linux_enable_event_reporting.
1955 (_initialize_linux_nat): Delete call to
1956 linux_ptrace_set_additional_flags.
1957 * nat/linux-ptrace.c (current_ptrace_options): Rename to
1958 supported_ptrace_options.
1959 (additional_flags): Delete variable.
1960 (linux_check_ptrace_features): Use supported_ptrace_options.
1961 (linux_test_for_tracesysgood, linux_test_for_tracefork):
1962 Likewise, and remove additional_flags check.
1963 (linux_enable_event_reporting): Change 'attached' argument to
1964 'options'. Use supported_ptrace_options.
1965 (ptrace_supports_feature): Change comment. Use
1966 supported_ptrace_options.
1967 (linux_ptrace_set_additional_flags): Delete function.
1968 * nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
1969 Delete function prototype.
1970 * remote.c (remote_fork_event_p): New function.
1971 (remote_detach_pid): New function.
1972 (remote_detach_1): Call remote_detach_pid, don't mourn inferior
1973 if doing detach-on-fork.
1974 (remote_follow_fork): New function.
1975 (remote_parse_stop_reply): Handle new "T" stop reason "fork".
1976 (remote_pid_to_str): Print "process" strings for pid/0/0 ptids.
1977 (init_extended_remote_ops): Initialize to_follow_fork.
1979 2015-05-12 Don Breazeal <donb@codesourcery.com>
1981 * nat/linux-ptrace.c (linux_check_ptrace_features): Change
1982 from static to extern.
1983 * nat/linux-ptrace.h (linux_check_ptrace_features): Declare.
1984 * remote.c (anonymous enum): <PACKET_fork_event_feature,
1985 * PACKET_vfork_event_feature>: New enumeration constants.
1986 (remote_protocol_features): Add table entries for new packets.
1987 (remote_query_supported): Add new feature queries to qSupported
1990 2015-05-12 Gary Benson <gbenson@redhat.com>
1992 * remote.c (remote_add_inferior): Call exec_file_locate_attach
1993 for fake PIDs as well as real ones.
1994 (remote_pid_to_exec_file): Send empty annex if PID is fake.
1996 2015-05-09 Siva Chandra Reddy <sivachandra@google.com>
1998 * NEWS (Python Scripting): Mention the new gdb.Value methods.
1999 * python/py-value.c (valpy_reference_value): New function.
2000 (valpy_const_value): Likewise.
2001 (value_object_methods): Add new methods.
2002 * value.c (make_cv_value): New function.
2003 * value.h (make_cv_value): Declare.
2005 2015-05-08 Yao Qi <yao@codesourcery.com>
2006 Sandra Loosemore <sandra@codesourcery.com>
2008 * dwarf2read.c (setup_type_unit_groups): Do NULL pointer check
2009 to 'lh->include_dirs' before accessing to it.
2010 (psymtab_include_file_name): Likewise.
2011 (dwarf_decode_lines_1): Likewise.
2012 (dwarf_decode_lines): Likewise.
2013 (file_file_name): Likewise.
2015 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
2017 * nios2-linux-tdep.c (NIOS2_SIGRETURN_TRAMP_ADDR): Define.
2018 (NIOS2_SIGRETURN_REGSAVE_OFFSET): Define.
2019 (nios2_linux_rt_sigreturn_init): Adjust base address of
2022 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
2024 * nios2-tdep.c (nios2_breakpoint_from_pc): Revert to using
2025 "trap 31" as the breakpoint instruction on all targets.
2027 2015-05-08 Jan Kratochvil <jan.kratochvil@redhat.com>
2029 * infcmd.c (print_return_value): Remove unused declaration.
2031 2015-05-08 Joel Brobecker <brobecker@adacore.com>
2033 * dwarf2read.c (attr_to_dynamic_prop)
2034 <DW_AT_data_member_location>: Use read_type_die isntead of
2037 2015-05-08 Joel Brobecker <brobecker@adacore.com>
2039 * ada-lang.c (ada_convert_actual): Add handling of formals
2040 passed inside an aligner type.
2042 2015-05-08 Joel Brobecker <brobecker@adacore.com>
2044 * copyright.py (NOT_FSF_LIST): Remove sim/erc32 entries.
2046 2015-05-08 Siva Chandra Reddy <sivachandra@google.com>
2049 * python/lib/gdb/command/xmethods.py (print_xm_info): Fix typo.
2050 Print xmethod matcher status.
2052 2015-05-08 Andreas Arnez <arnez@linux.vnet.ibm.com>
2054 * s390-linux-nat.c (fill_gregset): Avoid relying on the PSWA
2055 register in the regcache when treating the PSWM register, and vice
2058 2015-05-07 Gary Benson <gbenson@redhat.com>
2060 * linux-thread-db.c (struct thread_db_info)
2061 <td_ta_map_id2thr_p>: Remove field.
2062 (try_thread_db_load_1): Remove initialization for the above.
2064 2015-05-07 Gary Benson <gbenson@redhat.com>
2066 * linux-thread-db.c (struct thread_db_info)
2067 <td_thr_validate_p>: Remove field.
2068 (try_thread_db_load_1): Remove initialization for the above.
2070 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
2072 * compile/compile-object-load.c (compile_object_load): Support
2075 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
2077 * compile/compile.c (compile_to_object): Make the cmd_string parameter
2078 const. Use new variables for the const compatibility.
2079 (eval_compile_command): Make the cmd_string parameter const.
2080 * compile/compile.h (eval_compile_command): Make the cmd_string
2083 2015-05-06 Joel Brobecker <brobecker@adacore.com>
2085 * defs.h (deprecated_init_ui_hook): Delete. Remove associated
2087 * top.c (deprecated_init_ui_hook): Delete.
2088 (gdb_init): Remove handling of deprecated_init_ui_hook.
2089 * interps.c (clear_interpreter_hooks): Remove handling of
2090 deprecated_init_ui_hook.
2091 * main.c (captured_main): Update comment.
2093 2015-05-06 Joel Brobecker <brobecker@adacore.com>
2095 * solib.c (_initialize_solib): Add "info dll" alias creation.
2096 * windows-nat.c (set_windows_aliases): Delete.
2097 (_initialize_windows_nat): Remove deprecated_init_ui_hook
2099 * NEWS: Add news entry about "info dll" now being available
2102 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2104 * ada-lang.c (value_assign_to_component): Reformat and improve
2105 documentation. Remove all trailing spaces.
2107 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2109 * inline-frame.c (inline_frame_sniffer, skip_inline_frames):
2110 Stop counting inlined frames as soon as an out-of-line function
2113 2014-05-05 Pierre-Marie de Rodat <derodat@adacore.com>
2115 * dwarf2read.c (inherit_abstract_dies): Skip
2116 DW_TAG_GNU_call_site dies while inheriting children of an
2117 abstract DIE into a scope.
2118 (read_lexical_block_scope): Inherit abstract DIE's for
2121 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2123 * ada-valprint.c (val_print_packed_array_elements): Delete
2124 variable "len". Add a type-length check when comparing two
2125 consecutive elements of the array. Use the element's actual
2126 length in call to value_contents_eq.
2127 * ada-lang.c (ada_value_primitive_packed_val): Always return
2128 a value whose type has been resolved.
2130 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2132 * ada-lang.c (ada_value_primitive_packed_val): Recompute
2133 BIT_SIZE and LEN if the size of the resolved type is smaller
2134 than BIT_SIZE * HOST_CHAR_BIT.
2136 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2138 * ada-lang.c (ada_value_primitive_packed_val): Use a more
2139 correct address in call to value_at. Adjust call to
2140 value_address accordingly.
2142 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2144 * ada-valprint.c (ada_val_print_1): Resolve TYPE before trying
2147 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2149 * dwarf2loc.h (struct property_addr_info): Add "valaddr" field.
2150 * dwarf2loc.c (dwarf2_evaluate_property): Add handling of
2152 * gdbtypes.h (resolve_dynamic_type): Add "valaddr" parameter.
2153 * gdbtypes.c (resolve_dynamic_struct): Set pinfo.valaddr.
2154 (resolve_dynamic_type_internal): Set pinfo.valaddr.
2155 Add handling of addr_stack->valaddr.
2156 (resolve_dynamic_type): Add "valaddr" parameter.
2157 Set pinfo.valaddr field.
2158 * ada-lang.c (ada_discrete_type_high_bound): Update call to
2159 resolve_dynamic_type.
2160 (ada_discrete_type_low_bound): Likewise.
2161 * findvar.c (default_read_var_value): Likewise.
2162 * value.c (value_from_contents_and_address): Likewise.
2164 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2166 * gdbtypes.c (resolve_dynamic_array): Use
2167 create_array_type_with_stride instead of create_array_type.
2169 2015-04-30 DJ Delorie <dj@redhat.com>
2171 * rl78-tdep.c (rl78_analyze_prologue): Pass RL78_ISA_DEFAULT to
2174 2015-04-29 Doug Evans <dje@google.com>
2177 * NEWS: Document new gdb.XMethodWorker.get_result_type method.
2178 * eval.c (evaluate_subexp_standard) <OP_FUNCALL>: Handle
2179 EVAL_AVOID_SIDE_EFFECTS for xmethods.
2180 * extension-priv.h (struct extension_language_ops)
2181 <get_xmethod_result_type>: New member.
2182 * extension.c (get_xmethod_result_type): New function.
2183 * extension.h (get_xmethod_result_type): Declare.
2184 * python/py-xmethods.c (get_result_type_method_name): New static
2186 (py_get_result_type_method_name): Ditto.
2187 (gdbpy_get_xmethod_result_type): New function.
2188 (gdbpy_initialize_xmethods): Initialize py_get_result_type_method_name.
2189 * python/python-internal.h (gdbpy_get_xmethod_result_type): Declare.
2190 * python/python.c (python_extension_ops): Add
2191 gdbpy_get_xmethod_result_type.
2192 * python/lib/gdb/xmethod.py (XMethodWorker): Add get_result_type.
2193 * valarith.c (value_x_binop): Handle EVAL_AVOID_SIDE_EFFECTS for
2195 (value_x_unop): Ditto.
2196 * value.c (result_type_of_xmethod): New function.
2197 * value.h (result_type_of_xmethod): Declare.
2199 2015-04-29 Gary Benson <gbenson@redhat.com>
2201 * solib.c (solib_find_1): Allow fd argument to be NULL.
2202 (exec_file_find): Update comment.
2203 (solib_find): Likewise.
2204 * exec.c (exec_file_locate_attach): Use NULL as fd
2205 argument to exec_file_find to avoid having to close
2207 * infrun.c (follow_exec): Likewise.
2209 2015-04-28 Doug Evans <dje@google.com>
2212 * python/lib/gdb/printing.py (register_pretty_printer): Handle
2213 name or __name__ attributes. Handle gdb module as first argument.
2215 2015-04-28 Doug Evans <dje@google.com>
2218 * python/py-prettyprint.c (print_children): Verify result of children
2219 iterator. Provide better error message.
2220 * python/python-internal..h (gdbpy_print_python_errors_p): Declare.
2221 * python/python.c (gdbpy_print_python_errors_p): New function.
2223 2015-04-28 Doug Evans <dje@google.com>
2225 * gdbtypes.h (struct cplus_struct_type) <n_baseclasses>: Fix comment.
2227 2015-04-28 Sasha Smundak <asmundak@google.com>
2229 * NEWS: Mention gdb.Type.optimized_out method.
2230 * python/py-type.c (typy_optimized_out): New function.
2232 2015-04-28 John Baldwin <jhb@FreeBSD.org>
2234 * fbsd-nat.c: Include "gdb_wait.h" instead of <sys/wait.h>.
2236 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2238 * utils.c (init_page_info): Set rl_catch_sigwinch to zero.
2239 (initialize_utils): Move call of init_page_info() to ...
2240 * top.c (gdb_init): ... here.
2242 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2244 * tui/tui-win.c (tui_sigwinch_handler): Remove now-stale comment.
2245 (tui_sigwinch_handler): Still update our idea of
2246 the terminal's width and height even when TUI is not active.
2248 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2250 * utils.h (set_screen_width_and_height): Declare.
2251 * utils.c (set_screen_width_and_height): Define.
2252 * tui/tui-win.c (tui_update_gdb_sizes): Use it.
2254 2015-04-28 Gary Benson <gbenson@redhat.com>
2256 * infrun.c (solist.h): New include.
2257 (follow_exec): Use exec_file_find to prefix execd_pathname
2260 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2262 * tui/tui-source.c (tui_set_source_content): Avoid calling
2263 strcpy() when offset is 0.
2265 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2268 * tui/tui-data.c (tui_free_window): Don't free the locator
2269 window when passed an SRC_WIN or a DISASSEM_WIN.
2271 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2273 * tui/tui-data.h (struct tui_win_element): Forward-declare.
2274 (tui_win_content): Move declaration.
2275 (struct tui_gen_win_info): Give 'content' field the
2276 type tui_win_content.
2277 * tui/tui-data.c (init_content_element): Remove redundant and
2279 (tui_add_content_elements): Remove erroneous cast.
2280 * tui/tui-disasm.c (tui_set_disassem_content): Remove redundant
2282 (tui_get_begin_asm_address): Likewise.
2283 * tui/tui-regs.c (tui_show_registers): Likewise.
2284 (tui_show_register_group): Likewise.
2285 (tui_display_registers_from): Likewise.
2286 (tui_check_register_values): Likewise.
2287 * tui/tui-source.c (tui_set_source_content): Likewise.
2288 (tui_set_source_content_nil): Likewise.
2289 (tui_source_is_displayed): Likewise.
2290 * tui/tui-stack.c (tui_show_locator_content): Likewise.
2291 (tui_set_locator_fullname): Likewise.
2292 (tui_set_locator_info): Likewise.
2293 (tui_show_frame_info): Likewise.
2294 * tui/tui-winsource.c (tui_clear_source_content): Likewise.
2295 (tui_show_source_line): Likewise.
2296 (tui_horizontal_source_scroll): Likewise.
2297 (tui_update_breakpoint_info): Likewise.
2298 (tui_set_exec_info_content): Likewise.
2299 (tui_show_exec_info_content): Likewise.
2300 (tui_alloc_source_buffer): Likewise.
2301 (tui_line_is_displayed): Likewise.
2302 (tui_addr_is_displayed): Likewise.
2304 2015-04-27 John Baldwin <jhb@FreeBSD.org>
2306 * fbsd-nat.c: (fbsd_wait) [PL_FLAG_EXEC]: Report TARGET_WAITKIND_EXECD
2307 event if PL_FLAG_EXEC is set.
2308 [PL_FLAG_EXEC] (fbsd_insert_exec_catchpoint): New function.
2309 [PL_FLAG_EXEC] (fbsd_remove_exec_catchpoint): New function.
2310 (fbsd_nat_add_target) [PL_FLAG_EXEC]: Set
2311 "to_insert_exec_catchpoint" to "fbsd_insert_exec_catchpoint".
2312 Set "to_remove_exec_catchpoint" to "fbsd_remove_exec_catchpoint".
2314 2015-04-27 John Baldwin <jhb@FreeBSD.org>
2316 * fbsd-nat.c: [PT_LWPINFO] New variable super_wait.
2317 [TDP_RFPPWAIT] New variable fbsd_pending_children.
2318 [TDP_RFPPWAIT] (fbsd_remember_child): New function.
2319 [TDP_RFPPWAIT] (fbsd_is_child_pending): New function.
2320 [TDP_RFPPWAIT] (fbsd_fetch_kinfo_proc): New function.
2321 [PT_LWPINFO] (fbsd_wait): New function.
2322 [TDP_RFPPWAIT] (fbsd_follow_fork): New function.
2323 [TDP_RFPPWAIT] (fbsd_insert_fork_catchpoint): New function.
2324 [TDP_RFPPWAIT] (fbsd_remove_fork_catchpoint): New function.
2325 [TDP_RFPPWAIT] (fbsd_insert_vfork_catchpoint): New function.
2326 [TDP_RFPPWAIT] (fbsd_remove_vfork_catchpoint): New function.
2327 [TDP_RFPPWAIT] (fbsd_enable_follow_fork): New function.
2328 [TDP_RFPPWAIT] (fbsd_post_startup_inferior): New function.
2329 [TDP_RFPPWAIT] (fbsd_post_attach): New function.
2330 (fbsd_nat_add_target) [PT_LWPINFO] Set "to_wait" to
2332 [TDP_RFPPWAIT] Set "to_follow_fork" to "fbsd_follow_fork".
2333 Set "to_insert_fork_catchpoint" to "fbsd_insert_fork_catchpoint".
2334 Set "to_remove_fork_catchpoint" to "fbsd_remove_fork_catchpoint".
2335 Set "to_insert_vfork_catchpoint" to "fbsd_insert_vfork_catchpoint".
2336 Set "to_remove_vfork_catchpoint" to "fbsd_remove_vfork_catchpoint".
2337 Set "to_post_startup_inferior" to "fbsd_post_startup_inferior".
2338 Set "to_post_attach" to "fbsd_post_attach".
2340 2015-04-27 John Baldwin <jhb@FreeBSD.org>
2342 * fbsd-nat.c (fbsd_pid_to_exec_file): Mark static.
2343 (fbsd_find_memory_regions): Mark static.
2344 (fbsd_nat_add_target): New function.
2345 * fbsd-nat.h: Export fbsd_nat_add_target and remove prototypes for
2346 fbsd_pid_to_exec_file and fbsd_find_memory_regions.
2347 * amd64fbsd-nat.c (_initialize_amd64fbsd_nat): Use fbsd_nat_add_target.
2348 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Likewise.
2349 * ppcfbsd-nat.c (_initialize_ppcfbsd_nat): Likewise.
2350 * sparc64fbsd-nat.c (_initialize_sparc64fbsd_nat): Likewise.
2352 2015-04-27 Gary Benson <gbenson@redhat.com>
2354 * objfiles.c (allocate_objfile): Do not attempt to expand name
2355 if name is a "target:" filename.
2356 * auto-load.c (load_auto_scripts_for_objfile): Do not attempt
2357 to load auto-load scripts for objfiles with "target:" filenames.
2359 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
2361 * s390-linux-tdep.c: Include "elf/s390.h" and "elf-bfd.h".
2362 (enum s390_vector_abi_kind): New enum.
2363 (struct gdbarch_tdep)<vector_abi>: New field.
2364 (s390_effective_inner_type): Add parameter min_size. Stop
2365 unwrapping if the inner type is smaller than min_size.
2366 (s390_function_arg_float): Adjust call to
2367 s390_effective_inner_type.
2368 (s390_function_arg_vector): New function.
2369 (s390_function_arg_integer): Adjust comment.
2370 (struct s390_arg_state)<vr>: New field.
2371 (s390_handle_arg): Add parameter 'is_unnamed'. Pass vector
2372 arguments according to vector ABI when appropriate.
2373 (s390_push_dummy_call): Initialize the argument state's field
2374 'vr'. Adjust calls to s390_handle_arg.
2375 (s390_register_return_value): Handle vector return values.
2376 (s390_return_value): Apply the "register" return value convention
2377 to a vector when appropriate.
2378 (s390_gdbarch_init): Initialize tdep->vector_abi.
2379 * NEWS: Announce S390 vector ABI support.
2381 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
2383 * s390-linux-tdep.c (s390_return_value_convention): Remove
2384 function. Inline its logic...
2385 (s390_return_value): ...here. Instead, move the handling of the
2386 "register" return value convention...
2387 (s390_register_return_value): ...here. New function.
2389 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
2392 (is_float_singleton): Remove function. Move the "singleton" part
2394 (s390_effective_inner_type): ...here. New function.
2395 (is_float_like): Remove function. Inline its logic...
2396 (s390_function_arg_float): ...here.
2397 (is_pointer_like, is_integer_like, is_struct_like): Remove
2398 functions. Inline their logic...
2399 (s390_function_arg_integer): ...here.
2400 (s390_function_arg_pass_by_reference): Remove function.
2401 (extend_simple_arg): Remove function.
2402 (alignment_of): Remove function.
2403 (struct s390_arg_state): New structure.
2404 (s390_handle_arg): New function.
2405 (s390_push_dummy_call): Move parameter placement logic to the new
2406 function s390_handle_arg. Call it for calculating the stack area
2407 sizes first, and again for actually writing the parameters.
2409 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
2411 * s390-linux-tdep.c (is_power_of_two): Add comment. Return
2412 false if the argument is zero.
2414 2015-04-27 Pierre-Marie de Rodat <derodat@adacore.com>
2416 * ada-lang.c (template_to_static_fixed_type): Return input type
2417 when it is already fixed. Cache the input type itself when not
2418 creating a static fixed copy. Make it explicit that we never
2419 molestate the input type.
2420 * gdbtypes.c (resolve_dynamic_struct): Reset the
2421 TYPE_TARGET_TYPE field for resolved copies.
2423 2015-04-27 Joel Brobecker <brobecker@adacore.com>
2425 * ada-lang.c (ada_is_tagged_type): Add call to ada_check_typedef.
2426 (ada_lookup_struct_elt_type): Remove calls to ada_check_typedef.
2427 (template_to_static_fixed_type): Call ada_check_typedef only
2430 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
2432 * cli/cli-dump.c (srec_dump_command): Add internationalization
2434 (ihex_dump_command): Likewise.
2435 (tekhex_dump_command): Likewise.
2436 (binary_dump_command): Likewise.
2437 (binary_append_command): Likewise.
2439 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
2441 * cli/cli-dump.c (verilog_cmdlist): New variable.
2442 (dump_verilog_memory): New function.
2443 (dump_verilog_value): New function.
2444 (verilog_dump_command): New function.
2445 (_initialize_cli_dump): Add new commands to support verilog dump
2447 * NEWS: Add entry for "dump verilog".
2449 2015-04-24 Pierre-Marie de Rodat <derodat@adacore.com>
2451 * gdbtypes.c (print_gnat_stuff): Do not recurse on the
2452 descriptive type when there is none.
2454 2015-04-23 Patrick Palka <patrick@parcs.ath.cx>
2456 * tui/tui-win.c (tui_async_resize_screen): Call
2457 rl_resize_terminal().
2459 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
2461 * windows-nat.c (handle_output_debug_string): Don't change
2462 current_event.dwThreadId.
2463 (get_windows_debug_event): Use thread_id, rather than relying on
2464 current_event.dwThreadId being changed.
2466 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
2468 * windows-nat.c (windows_continue): Report an error if
2469 ContinueDebugEvent() fails.
2471 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
2473 * windows-nat.c (windows_resume): Fix misspelling in debug output.
2475 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
2477 * windows-nat.c (get_windows_debug_event): Replace retval with
2478 thread_id throughout. Update stale comment.
2480 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
2482 * windows-nat.c (get_windows_debug_event): Don't use ternary
2483 conditional operator.
2485 2015-04-21 Pierre Muller <muller@sourceware.org>
2488 p-exp.y (yylex): Reorganize code to return the matched pattern
2489 for a field of this.
2491 2015-04-21 Gary Benson <gbenson@redhat.com>
2493 * common/fileio.h (fileio_to_host_openflags): New declaration.
2494 * common/fileio.c (fcntl.h): New include.
2495 (fileio_to_host_openflags): New function, factored out from...
2496 * inf-child.c (inf_child_fileio_open_flags_to_host): ...here.
2499 2015-04-21 Kevin Buettner <kevinb@redhat.com>
2501 * rl78-tdep.c (RL78_SP_ADDR): Define.
2502 (opc_reg_to_gdb_regnum): New static function.
2503 (rl78_analyze_prologue): Recognize instructions forming slightly
2504 more interesting prologues.
2506 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
2509 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
2510 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
2511 TYPE_CODE_REF types so that they are not considered as dynamic
2512 depending on the referenced type.
2513 (resolve_dynamic_type_internal): Likewise.
2515 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
2518 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
2519 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
2520 "top_level" parameter.
2521 (resolve_dynamic_type_internal): Remove the unused "top_level"
2522 parameter. Update call to is_dynamic_type_internal.
2523 (is_dynamic_type): Update call to is_dynamic_type_internal.
2524 (resolve_dynamic_range): Update call to
2525 resolve_dynamic_type_internal.
2526 (resolve_dynamic_union): Likewise.
2527 (resolve_dynamic_struct): Likewise.
2528 (resolve_dynamic_type): Likewise.
2530 2015-04-19 Gabriel Krisman Bertazi <gabriel@krisman.be>
2532 * breakpoint.c (update_dprintf_command_list): Remove duplicated
2535 2015-04-20 Thomas Schwinge <thomas@codesourcery.com>
2537 * reply_mig_hack.awk: Robustify parsing.
2539 * reply_mig_hack.awk: Don't bother to declare an intermediate
2540 function pointer variable.
2542 2015-04-17 Doug Evans <dje@google.com>
2544 * solib-svr4.c (svr4_exec_displacement): Rename outer "displacement"
2545 to "exec_displacement" to avoid confusion with inner use of the name.
2547 2015-04-17 Pedro Alves <palves@redhat.com>
2549 * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Return zero
2550 if HW point of TYPE isn't supported.
2552 2015-04-17 Yao Qi <yao.qi@linaro.org>
2553 Pedro Alves <palves@redhat.com>
2555 * target.h (target_can_use_hardware_watchpoint): Update comments.
2556 Remove trailing ";".
2558 2015-04-17 Gary Benson <gbenson@redhat.com>
2560 * remote.c (remote_add_inferior): New argument try_open_exec.
2561 If nonzero, attempt to open the inferior's executable file as
2562 the main executable if no main executable is open already.
2563 All callers updated.
2564 * NEWS: Mention that GDB now supports automatic location and
2565 retrieval of executable + files from remote targets.
2567 2015-04-17 Gary Benson <gbenson@redhat.com>
2569 * target.h (TARGET_OBJECT_EXEC_FILE): New enum value.
2570 * remote.c (PACKET_qXfer_exec_file): Likewise.
2571 (remote_protocol_features): Register the
2572 "qXfer:exec-file:read" feature.
2573 (remote_xfer_partial): Handle TARGET_OBJECT_EXEC_FILE.
2574 (remote_pid_to_exec_file): New function.
2575 (init_remote_ops): Initialize to_pid_to_exec_file.
2576 (_initialize_remote): Register new "set/show remote
2577 pid-to-exec-file-packet" command.
2578 * NEWS: Announce new qXfer:exec-file:read packet.
2580 2015-04-17 Gary Benson <gbenson@redhat.com>
2582 * nat/linux-procfs.h (linux_proc_pid_to_exec_file):
2584 * nat/linux-procfs.c (linux_proc_pid_to_exec_file):
2585 New function, factored out from...
2586 * linux-nat.c (linux_child_pid_to_exec_file): ...here.
2588 2015-04-17 Gary Benson <gbenson@redhat.com>
2590 * exec.c (solist.h): New include.
2591 (exec_file_locate_attach): Prefix absolute executable
2592 paths with gdb_sysroot if set.
2593 * NEWS: Mention that executable paths may be prepended
2596 2015-04-17 Gary Benson <gbenson@redhat.com>
2598 * solist.h (exec_file_find): New declaration.
2599 * solib.c (solib_find_1): New function, factored out from...
2600 (solib_find): ...here.
2601 (exec_file_find): New function.
2603 2015-04-17 Gary Benson <gbenson@redhat.com>
2605 * gdbcore.h (exec_file_locate_attach): New declaration.
2606 * exec.c (exec_file_locate_attach): New function, factored
2608 * infcmd.c (attach_command_post_wait): ...here.
2610 2015-04-17 Mike Frysinger <vapier@gentoo.org>
2612 * MAINTAINERS: Add myself for Blackfin/write-after-approval.
2614 2015-04-16 Yao Qi <yao.qi@linaro.org>
2616 * infrun.c (maybe_software_singlestep): Declare.
2617 (displaced_step_fixup): Call maybe_software_singlestep.
2619 2015-04-15 Doug Evans <dje@google.com>
2621 * psymtab.c (psym_expand_symtabs_matching): Add QUIT call.
2623 2015-04-15 Doug Evans <dje@google.com>
2625 * dwarf2read.c (dw2_expand_symtabs_matching): Add some QUIT calls.
2627 2015-04-15 Simon Marchi <simon.marchi@ericsson.com>
2629 * python/lib/gdb/command/unwinders.py: Add parentheses.
2631 2015-04-15 Yao Qi <yao.qi@linaro.org>
2633 * arm-linux-tdep.c (arm_linux_copy_svc): Update debug message.
2635 2015-04-15 Yao Qi <yao.qi@linaro.org>
2637 * arm-linux-tdep.c (arm_linux_copy_svc): Fix indentation.
2639 2015-04-15 Yao Qi <yao.qi@linaro.org>
2641 * arm-linux-tdep.c (arm_linux_cleanup_svc): Use
2642 dsc->insn_size instead of 4.
2644 2015-04-14 Gary Benson <gbenson@redhat.com>
2646 * jit.c (mem_bfd_iovec_stat): Zero supplied buffer.
2647 * minidebug.c (lzma_stat): Likewise.
2648 * solib-spu.c (spu_bfd_iovec_stat): Likewise.
2649 * spu-linux-nat.c (spu_bfd_iovec_stat): Likewise.
2651 2015-04-13 Stan Shebs <stanshebs@google.com>
2653 * MAINTAINERS: Update my email address.
2655 2015-04-13 John Baldwin <jhb@FreeBSD.org>
2657 * amd64-tdep.c (amd64_target_description): New function.
2658 * amd64-tdep.h: Export amd64_target_description and tdesc_amd64.
2659 * amd64bsd-nat.c [PT_GETXSTATE_INFO]: New variable amd64bsd_xsave_len.
2660 (amd64bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
2661 x86 extended save area.
2662 (amd64bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
2663 * amd64bsd-nat.h: Export amd64bsd_xsave_len.
2664 * amd64fbsd-nat.c (amd64fbsd_read_description): New function.
2665 (_initialize_amd64fbsd_nat): Set "to_read_description" to
2666 "amd64fbsd_read_description".
2667 * amd64fbsd-tdep.c (amd64fbsd_core_read_description): New function.
2668 (amd64fbsd_supply_xstateregset): New function.
2669 (amd64fbsd_collect_xstateregset): New function.
2670 Add "amd64fbsd_xstateregset".
2671 (amd64fbsd_iterate_over_regset_sections): New function.
2672 (amd64fbsd_init_abi): Set "xsave_xcr0_offset" to
2673 "I386_FBSD_XSAVE_XCR0_OFFSET".
2674 Add "iterate_over_regset_sections" gdbarch method.
2675 Add "core_read_description" gdbarch method.
2676 * i386-tdep.c (i386_target_description): New function.
2677 * i386-tdep.h: Export i386_target_description and tdesc_i386.
2678 * i386bsd-nat.c [PT_GETXSTATE_INFO]: New variable i386bsd_xsave_len.
2679 (i386bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
2680 x86 extended save area.
2681 (i386bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
2682 * i386bsd-nat.h: Export i386bsd_xsave_len.
2683 * i386fbsd-nat.c (i386fbsd_read_description): New function.
2684 (_initialize_i386fbsd_nat): Set "to_read_description" to
2685 "i386fbsd_read_description".
2686 * i386fbsd-tdep.c (i386fbsd_core_read_xcr0): New function.
2687 (i386fbsd_core_read_description): New function.
2688 (i386fbsd_supply_xstateregset): New function.
2689 (i386fbsd_collect_xstateregset): New function.
2690 Add "i386fbsd_xstateregset".
2691 (i386fbsd_iterate_over_regset_sections): New function.
2692 (i386fbsd4_init_abi): Set "xsave_xcr0_offset" to
2693 "I386_FBSD_XSAVE_XCR0_OFFSET".
2694 Add "iterate_over_regset_sections" gdbarch method.
2695 Add "core_read_description" gdbarch method.
2696 * i386fbsd-tdep.h: New file.
2698 2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2700 * NEWS (Changes since GDB 7.9): Add removed -xdb.
2701 * breakpoint.c (command_line_is_silent): Remove xdb_commands
2703 (_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba
2705 * cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and
2707 * cli/cli-decode.c (find_command_name_length): Remove xdb_commands
2709 * defs.h (xdb_commands): Remove declaration.
2710 * f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc.
2711 * guile/scm-cmd.c (command_classes): Remove xdb from comment.
2712 * infcmd.c (run_no_args_command, go_command): Remove.
2713 (_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr.
2714 * infrun.c (xdb_handle_command): Remove.
2715 (_initialize_infrun): Remove xdb_commands for lz and z.
2716 * main.c (xdb_commands): Remove variable.
2717 (captured_main): Remove "xdb" from long_options.
2718 (print_gdb_help): Remove --xdb from help.
2719 * python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment.
2720 * source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?.
2721 * stack.c (backtrace_full_command, args_plus_locals_info)
2722 (current_frame_command): Remove.
2723 (_initialize_stack): Remove xdb_commands for t, T and l.
2724 * symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg.
2725 * thread.c (_initialize_thread): Remove xdb_commands condition.
2726 * tui/tui-layout.c (tui_toggle_layout_command)
2727 (tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove.
2728 (_initialize_tui_layout): Remove xdb_commands for td and ts.
2729 * tui/tui-regs.c (tui_scroll_regs_forward_command)
2730 (tui_scroll_regs_backward_command): Remove.
2731 (_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r.
2732 * tui/tui-win.c (tui_xdb_set_win_height_command): Remove.
2733 (_initialize_tui_win): Remove xdb_commands for U and w.
2734 * utils.c (pagination_on_command, pagination_off_command): Remove.
2735 (initialize_utils): Remove xdb_commands for am and sm.
2737 2015-04-10 Pedro Alves <palves@redhat.com>
2739 * infrun.c (displaced_step_fixup): Switch to the event ptid
2740 earlier. If the thread stopped for a watchpoint and the
2741 target/arch has non-continuable watchpoints, cancel the displaced
2743 (resume): Don't start a displaced step if in-line step-over info
2746 2015-04-10 Pedro Alves <palves@redhat.com>
2748 * infrun.c (displaced_step_in_progress): New function.
2749 (do_target_resume): Advise target to report all signals if
2752 2015-04-10 Pedro Alves <palves@redhat.com>
2755 * infrun.c (process_event_stop_test): Don't assume a step-resume
2756 is set if tp->stepped_breakpoint is true.
2758 2015-04-10 Yao Qi <yao.qi@linaro.org>
2760 * arm-tdep.c (install_alu_reg): Update comment.
2761 (thumb_copy_alu_reg): Remove local variable rn. Update
2762 debugging message. Use r2 instead of r1 in the modified
2765 2015-04-10 Pedro Alves <palves@redhat.com>
2768 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Install
2769 linux_displaced_step_location as gdbarch_displaced_step_location
2771 * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
2772 * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
2773 * linux-tdep.c (linux_displaced_step_location): New function,
2774 based on ppc_linux_displaced_step_location.
2775 * linux-tdep.h (linux_displaced_step_location): New declaration.
2776 * ppc-linux-tdep.c (ppc_linux_entry_point_addr): Delete.
2777 (ppc_linux_inferior_created, ppc_linux_displaced_step_location):
2779 (ppc_linux_init_abi): Install linux_displaced_step_location as
2780 gdbarch_displaced_step_location hook, even without Cell/B.E..
2781 (_initialize_ppc_linux_tdep): Don't install
2782 ppc_linux_inferior_created as inferior_created observer.
2783 * s390-linux-tdep.c (s390_gdbarch_init): Install
2784 linux_displaced_step_location as gdbarch_displaced_step_location
2787 2015-04-09 Gary Benson <gbenson@redhat.com>
2789 * common/common-remote-fileio.h: Rename to...
2790 * common/fileio.h: ...this. Update all references.
2791 (remote_fileio_to_fio_error): Rename to...
2792 (host_to_fileio_error): ...this.
2793 (remote_fileio_to_be): Rename to...
2794 (host_to_bigendian): ...this. Update all callers.
2795 (remote_fileio_to_fio_uint): Rename to...
2796 (host_to_fileio_uint): ...this. Update all callers.
2797 (remote_fileio_to_fio_time): Rename to...
2798 (host_to_fileio_time): ...this. Update all callers.
2799 (remote_fileio_to_fio_stat): Rename to...
2800 (host_to_fileio_stat): ...this.
2801 Update all references.
2802 * common/common-remote-fileio.c: Rename to...
2803 * common/fileio.c: ...this. Update all references.
2804 (remote_fileio_to_fio_error): Rename to...
2805 (host_to_fileio_error): ...this. Update all callers.
2806 (remote_fileio_mode_to_target): Rename to...
2807 (fileio_mode_pack): ...this. Update all callers.
2808 (remote_fileio_to_fio_mode): Rename to...
2809 (host_to_fileio_mode): ...this. Update all callers.
2810 (remote_fileio_to_fio_ulong): Rename to...
2811 (host_to_fileio_ulong): ...this. Update all callers.
2812 (remote_fileio_to_fio_stat): Rename to...
2813 (host_to_fileio_stat): ...this. Update all callers.
2815 2015-04-09 Andy Wingo <wingo@igalia.com>
2817 * guile/scm-frame.c (gdbscm_frame_read_register): New function.
2818 (frame_functions): Bind gdbscm_frame_read_register to
2819 frame-read-register.
2820 * guile/lib/gdb.scm (frame-read-register): Export.
2822 2015-04-09 Gary Benson <gbenson@redhat.com>
2824 * common/common-remote-fileio.h (remote_fileio_to_fio_error):
2826 * common/common-remote-fileio.c (remote_fileio_to_fio_error):
2827 New function, factored out the named functions below.
2828 * inf-child.c (gdb/fileio.h): Remove include.
2829 (common-remote-fileio.h): New include.
2830 (inf_child_errno_to_fileio_error): Remove function. Update
2831 all callers to use remote_fileio_to_fio_error.
2832 * remote-fileio.c (remote_fileio_errno_to_target): Likewise.
2834 2015-04-09 Andy Wingo <wingo@igalia.com>
2836 * MAINTAINERS (Write After Approval): Add Andy Wingo.
2838 2015-04-09 H.J. Lu <hongjiu.lu@intel.com>
2840 * acinclude.m4: (GDB_AC_CHECK_BFD): Set ZLIBDIR with $zlibdir.
2841 Replace $zlibdir with $ZLIBDIR in LDFLAGS.
2842 * configure: Regenerated.
2844 2015-04-09 Pedro Alves <palves@redhat.com>
2846 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add strtok_r.
2847 * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/strtok_r.m4.
2848 * gnulib/configure, gnulib/config.in, gnulib/aclocal.m4: Regenerate.
2849 * gnulib/import/Makefile.am: Update.
2850 * gnulib/import/Makefile.in: Update.
2851 * gnulib/import/m4/gnulib-cache.m4: Update.
2852 * gnulib/import/m4/gnulib-comp.m4: Update.
2853 * gnulib/import/m4/strtok_r.m4: New file.
2854 * gnulib/import/strtok_r.c: New file.
2856 2015-04-09 Pedro Alves <palves@redhat.com>
2858 * gnulib/update-gnulib.sh (aclocal version check): Filter out
2859 "called too early to check prototype".
2861 2015-04-08 Sergio Durigan Junior <sergiodj@redhat.com>
2864 * python/py-cmd.c (cmdpy_completer_helper): Adjust function to not
2865 use a caching mechanism. Adjust comments and code to reflect
2866 that. Replace 'sizeof' by 'strlen' when fetching 'wordobj'.
2867 (cmdpy_completer_handle_brkchars): Adjust call to
2868 cmdpy_completer_helper. Call Py_XDECREF for 'resultobj'.
2869 (cmdpy_completer): Likewise.
2871 2015-04-08 Yao Qi <yao.qi@linaro.org>
2873 * spu-tdep.c (spu_gdbarch_init): Don't call
2874 set_gdbarch_cannot_step_breakpoint.
2876 2015-04-07 Sergio Durigan Junior <sergiodj@redhat.com>
2878 * linux-tdep.c (decode_vmflags): Initialize 'saveptr'.
2880 2015-04-07 Pedro Alves <palves@redhat.com>
2882 * gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): Rename to ...
2883 (ALL_THREADS_SAFE): ... this, and don't skip exited threads.
2884 (delete_exited_threads): New declaration.
2885 * infrun.c (follow_exec): Use ALL_THREADS_SAFE.
2886 * linux-nat.c (linux_nat_update_thread_list): New function.
2887 (linux_nat_add_target): Install it.
2888 * remote.c (remote_update_thread_list): Use ALL_THREADS_SAFE.
2889 * thread.c (prune_threads): Use ALL_THREADS_SAFE.
2890 (delete_exited_threads): New function.
2892 2015-04-07 Pedro Alves <pedro@codesourcery.com>
2894 * infrun.c (resume) <displaced stepping debug output>: Get the
2895 leader thread's regcache, not resume_ptid's.
2897 2015-04-06 Doug Evans <xdje42@gmail.com>
2899 * symtab.c (hash_symbol_entry): Hash STRUCT_DOMAIN symbols as
2901 (symbol_cache_lookup): Clarify use of bsc_ptr, slot_ptr parameters.
2902 Include symbol domain in debugging output.
2904 2015-04-06 Pedro Alves <palves@redhat.com>
2905 Bernd Edlinger <bernd.edlinger@hotmail.de>
2907 * configure.ac: Remove the mingw32-specific stub-termcap.o
2908 fallback, and instead fallback to the stub termcap on all hosts.
2909 * configure: Regenerate.
2910 * stub-termcap.c [!__MINGW32__] (PC, BC, UP): Define as weak
2913 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
2915 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
2916 "top_level" parameter.
2917 (resolve_dynamic_type_internal): Remove the unused "top_level"
2918 parameter. Update call to is_dynamic_type_internal.
2919 (is_dynamic_type): Update call to is_dynamic_type_internal.
2920 (resolve_dynamic_range): Update call to
2921 resolve_dynamic_type_internal.
2922 (resolve_dynamic_union): Likewise.
2923 (resolve_dynamic_struct): Likewise.
2924 (resolve_dynamic_type): Likewise.
2926 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
2928 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
2929 TYPE_CODE_REF types so that they are not considered as dynamic
2930 depending on the referenced type.
2931 (resolve_dynamic_type_internal): Likewise.
2933 2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
2935 * Makefile.in (top_srcdir): New.
2936 * configure: Regenerated.
2938 2015-04-02 Gary Benson <gbenson@redhat.com>
2940 * NEWS: Announce the new default sysroot of "target:".
2942 2015-04-02 Gary Benson <gbenson@redhat.com>
2944 * main.c (captured_main): Set gdb_sysroot to "target:"
2945 if not otherwise set.
2947 2015-04-02 Gary Benson <gbenson@redhat.com>
2949 * exec.c (exec_file_attach): Support "target:" filenames.
2951 2015-04-02 Gary Benson <gbenson@redhat.com>
2953 * solib.c (solib_find): Strip "target:" prefix from sysroot
2954 if accessing local files.
2956 2015-04-02 Gary Benson <gbenson@redhat.com>
2958 * symfile.c (symfile_bfd_open): Reorder to remove duplicated
2959 checks and error messages.
2961 2015-04-02 Gary Benson <gbenson@redhat.com>
2963 * remote.h (REMOTE_SYSROOT_PREFIX): Remove definition.
2964 (remote_filename_p): Remove declaration.
2965 (remote_bfd_open): Likewise.
2966 * remote.c (remote_bfd_iovec_open): Remove function.
2967 (remote_bfd_iovec_close): Likewise.
2968 (remote_bfd_iovec_pread): Likewise.
2969 (remote_bfd_iovec_stat): Likewise.
2970 (remote_filename_p): Likewise.
2971 (remote_bfd_open): Likewise.
2972 * symfile.h (gdb_bfd_open_maybe_remote): Remove declaration.
2973 * symfile.c (separate_debug_file_exists): Use gdb_bfd_open.
2974 (gdb_bfd_open_maybe_remote): Remove function.
2975 (symfile_bfd_open): Replace remote filename check with
2976 target filename check.
2977 (reread_symbols): Use gdb_bfd_open.
2978 * build-id.c (gdbcore.h): New include.
2979 (build_id_to_debug_bfd): Use gdb_bfd_open.
2980 * infcmd.c (attach_command_post_wait): Remove remote filename
2982 * solib.c (solib_find): Replace remote-specific handling with
2983 target-specific handling. Update comments where necessary.
2984 (solib_bfd_open): Replace remote-specific handling with
2985 target-specific handling.
2986 (gdb_sysroot_changed): New function.
2987 (_initialize_solib): Call the above when gdb_sysroot changes.
2988 * windows-tdep.c (gdbcore.h): New include.
2989 (windows_xfer_shared_library): Use gdb_bfd_open.
2991 2015-04-02 Gary Benson <gbenson@redhat.com>
2993 * gdb/gdb_bfd.h (TARGET_SYSROOT_PREFIX): New definition.
2994 (is_target_filename): New declaration.
2995 (gdb_bfd_has_target_filename): Likewise.
2996 (gdb_bfd_open): Update documentation comment.
2997 * gdb_bfd.c (target.h): New include.
2998 (gdb/fileio.h): Likewise.
2999 (is_target_filename): New function.
3000 (gdb_bfd_has_target_filename): Likewise.
3001 (fileio_errno_to_host): Likewise.
3002 (gdb_bfd_iovec_fileio_open): Likewise.
3003 (gdb_bfd_iovec_fileio_pread): Likewise.
3004 (gdb_bfd_iovec_fileio_close): Likewise.
3005 (gdb_bfd_iovec_fileio_fstat): Likewise.
3006 (gdb_bfd_open): Use target fileio to access paths prefixed
3007 with "target:" where necessary.
3009 2015-04-02 Gary Benson <gbenson@redhat.com>
3011 * target.h (struct target_ops) <to_filesystem_is_local>:
3013 (target_filesystem_is_local): New macro.
3014 * target-delegates.c: Regenerate.
3015 * remote.c (remote_filesystem_is_local): New function.
3016 (init_remote_ops): Initialize to_filesystem_is_local.
3018 2015-04-02 Gary Benson <gbenson@redhat.com>
3020 * target.h (struct target_ops) <to_fileio_fstat>: New field.
3021 (target_fileio_fstat): New declaration.
3022 * target.c (target_fileio_fstat): New function.
3023 * inf-child.c (inf_child_fileio_fstat): Likewise.
3024 (inf_child_target): Initialize to_fileio_fstat.
3025 * remote.c (init_remote_ops): Likewise.
3027 2015-04-01 Sasha Smundak <asmundak@google.com>
3029 * Makefile.in (SUBDIR_PYTHON_OBJS): Add py-unwind.o.
3030 (SUBDIR_PYTHON_SRCS): Add py-unwind.c.
3031 (py-unwind.o): New recipe.
3032 * NEWS: mention Python frame unwinding.
3033 * data-directory/Makefile.in (PYTHON_FILE_LIST): Add
3034 gdb/unwinder.py and gdb/command/unwinder.py
3035 * python/lib/gdb/__init__.py (packages): Add frame_unwinders
3037 (execute_unwinders): New function.
3038 * python/lib/gdb/command/unwinders.py: New file.
3039 * python/lib/gdb/unwinder.py: New file.
3040 * python/py-objfile.c (objfile_object): Add frame_unwinders field.
3041 (objfpy_dealloc): Decrement frame_unwinders reference count.
3042 (objfpy_initialize): Create frame_unwinders list.
3043 (objfpy_get_frame_unwinders): New function.
3044 (objfpy_set_frame_unwinders): Ditto.
3045 (objfile_getset): Add frame_unwinders attribute to Objfile.
3046 * python/py-progspace.c (pspace_object): Add frame_unwinders field.
3047 (pspy_dealloc): Decrement frame_unwinders reference count.
3048 (pspy_initialize): Create frame_unwinders list.
3049 (pspy_get_frame_unwinders): New function.
3050 (pspy_set_frame_unwinders): Ditto.
3051 (pspy_getset): Add frame_unwinders attribute to gdb.Progspace.
3052 * python/py-unwind.c: New file.
3053 * python/python-internal.h (pspy_get_name_unwinders): New prototype.
3054 (objpy_get_frame_unwinders): New prototype.
3055 (gdbpy_initialize_unwind): New prototype.
3056 * python/python.c (gdbpy_apply_type_printers): Call
3057 gdbpy_initialize_unwind.
3059 2015-04-01 Pedro Alves <palves@redhat.com>
3061 * infrun.c (resume): Check currently_stepping after clearing
3062 stepped_breakpoint, not before.
3064 2015-04-01 Pedro Alves <palves@redhat.com>
3066 * infrun.c (print_target_wait_results): Print all the ptid
3069 2015-04-01 Pedro Alves <palves@redhat.com>
3071 * infrun.c (keep_going): Also discard cleanups if inserting
3074 2015-04-01 Pedro Alves <palves@redhat.com>
3076 * infrun.c (wait_for_inferior): Install the
3077 finish_thread_state_cleanup cleanup across the whole function, not
3078 just around handle_inferior_event.
3080 2015-04-01 Pedro Alves <palves@redhat.com>
3082 * infrun.c (resume) <step past permanent breakpoint>: Use
3085 2015-04-01 Pedro Alves <palves@redhat.com>
3087 * linux-nat.c (linux_handle_extended_wait): Always call set_running.
3089 2015-04-01 Pierre-Marie de Rodat <derodat@adacore.com>
3091 * MAINTAINERS (Write After Approval): Add "Pierre-Marie de Rodat".
3093 2015-04-01 Pedro Alves <palves@redhat.com>
3095 * linux-thread-db.c (record_thread): Readd the thread to gdb's
3096 list if it was marked exited.
3098 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
3100 * configure: Regenerated.
3102 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
3103 Jan Kratochvil <jan.kratochvil@redhat.com>
3104 Oleg Nesterov <oleg@redhat.com>
3107 * linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'.
3108 New enum identifying the various options of the coredump_filter
3110 (struct smaps_vmflags): New struct.
3111 (use_coredump_filter): New variable.
3112 (decode_vmflags): New function.
3113 (mapping_is_anonymous_p): Likewise.
3114 (dump_mapping_p): Likewise.
3115 (linux_find_memory_regions_full): New variables
3116 'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'.
3117 Removed variable 'modified'. Read /proc/<PID>/smaps file; improve
3118 parsing of its information. Implement memory mapping filtering
3119 based on its contents.
3120 (show_use_coredump_filter): New function.
3121 (_initialize_linux_tdep): New command 'set use-coredump-filter'.
3122 * NEWS: Mention the possibility of using the
3123 '/proc/PID/coredump_filter' file when generating a corefile.
3124 Mention new command 'set use-coredump-filter'.
3126 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
3128 * solib-svr4.c (solib_svr4_r_ldsomap): Catch possible exception by
3129 read_memory_unsigned_integer.
3131 2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
3133 * Makefile.in (ZLIB): New.
3134 (ZLIBINC): Likewise.
3135 (INTERNAL_CFLAGS_BASE): Add $(ZLIBINC).
3136 (CLIBS): Add $(ZLIB).
3137 * acinclude.m4: (GDB_AC_CHECK_BFD): Add $zlibdir to LDFLAGS.
3139 * gdb_bfd.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
3140 * top.c (print_gdb_configuration): Remove --with-zlib and
3142 * config.in: Regenerated.
3143 * configure: Likewise.
3145 2015-03-31 Antoine Tremblay <antoine.tremblay@ericsson.com>
3147 * NEWS: Mention info os cpus support.
3148 * gdb/nat/linux-osdata.c (linux_xfer_osdata_cpus): New function.
3149 (struct osdata_type): Add cpus entry, reorder the entries in
3152 2015-03-31 Matthias Klose <doko@ubuntu.com>
3154 * compile/compile.c (compile_to_object): Allow triplets with or
3157 2015-03-30 Doug Evans <dje@google.com>
3160 * cp-namespace.c (cp_search_static_and_baseclasses): Always look for
3161 klass in VAR_DOMAIN.
3163 2015-03-30 Gary Benson <gbenson@redhat.com>
3165 * remote.c (remote_mourn_1): Remove function. Update all callers
3166 to use remote_mourn.
3167 (extended_remote_mourn_1): Remove function. Update all callers
3168 to use extended_remote_mourn.
3169 (extended_remote_attach_1): Remove function. Update all callers
3170 to use extended_remote_attach.
3172 2015-03-28 James Bowman <james.bowman@ftdichip.com>
3174 * Makefile.in (ALL_TARGET_OBS): Add ft32-tdep.o.
3175 (HFILES_NO_SRCDIR): Add ft32-tdep.h.
3176 (ALLDEPFILES): Add ft32-tdep.c.
3177 * configure.tgt: Add FT32 entry.
3178 * ft32-tdep.c: New file, FT32 target-dependent code.
3179 * ft32-tdep.h: New file, FT32 target-dependent code.
3181 2015-03-27 Jan Kratochvil <jan.kratochvil@redhat.com>
3184 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3186 * printcmd.c (print_command_1): Move expr variable scope.
3188 2015-03-27 Joel Brobecker <brobecker@adacore.com>
3190 * dtrace-probe.c (dtrace_process_dof_probe): Initialize expr to NULL.
3192 2015-03-27 Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
3194 * gdb_bfd.c (gdb_bfd_section_index): Fix off-by-one for special
3197 2015-03-26 Joel Brobecker <brobecker@adacore.com>
3199 * dtrace-probe.c (dtrace_process_dof_probe): Contain any
3200 exception raised while parsing the probe arguments.
3201 Force parsing to be done using the C language parser.
3202 * expression.h (parse_expression_with_language): Declare.
3203 * parse.c (parse_expression_with_language): New function.
3205 2015-03-26 Jon Turney <jon.turney@dronecode.org.uk>
3207 * MAINTAINERS (Write After Approval): Add "Jon Turney".
3209 2015-03-26 Andy Wingo <wingo@igalia.com>
3212 * dwarf2read.c (struct partial_die_info): Add has_const_value
3214 (add_partial_symbol): Don't punt on symbols that have const_value
3216 (read_partial_die): Detect DW_AT_const_value.
3218 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3221 * printcmd.c (print_command_1): Move expr variable scope.
3223 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3226 * printcmd.c (validate_format): Make the parameter cmdname const.
3228 2015-03-26 Don Breazeal <donb@codesourcery.com>
3230 * remote.c (_initialize_remote): Update comment.
3232 2015-03-26 Pedro Alves <palves@redhat.com>
3233 Jon TURNEY <jon.turney@dronecode.org.uk>
3235 * coffread.c (coff_symfile_read): When constructing the name of an
3236 import stub symbol from import symbol for amd64, only skip the
3237 char after _imp_ if the target is underscored (like i386) and the
3238 char is indeed the target's leading char.
3240 2015-03-25 Pedro Alves <palves@redhat.com>
3242 * target.h <to_async>: Replace 'callback' and 'context' parameters
3243 with boolean 'enable' parameter.
3244 (target_async): Replace CALLBACK and CONTEXT parameters with
3245 boolean ENABLE parameter.
3246 * inf-loop.c (inferior_event_handler): Adjust.
3247 * linux-nat.c (linux_nat_attach, linux_nat_resume)
3248 (linux_nat_resume): Adjust.
3249 (async_client_callback, async_client_context): Delete.
3250 (handle_target_event): Call inferior_event_handler directly.
3251 (linux_nat_async): Replace 'callback' and 'context' parameters
3252 with boolean 'enable' parameter. Adjust. Remove references to
3253 async_client_callback and async_client_context.
3254 (linux_nat_close): Adjust.
3255 * record-btrace.c (record_btrace_async): Replace 'callback' and
3256 'context' parameters with boolean 'enable' parameter. Adjust.
3257 (record_btrace_resume): Adjust.
3258 * record-full.c (record_full_async): Replace 'callback' and
3259 'context' parameters with boolean 'enable' parameter. Adjust.
3260 (record_full_resume, record_full_core_resume): Adjust.
3261 * remote.c (struct remote_state) <async_client_callback,
3262 async_client_context>: Delete fields.
3263 (remote_start_remote, extended_remote_attach_1, remote_resume)
3264 (extended_remote_create_inferior): Adjust.
3265 (remote_async_serial_handler): Call inferior_event_handler
3267 (remote_async): Replace 'callback' and 'context' parameters with
3268 boolean 'enable' parameter. Adjust.
3269 * top.c (gdb_readline_wrapper_cleanup, gdb_readline_wrapper):
3271 * target-delegates.c: Regenerate.
3273 2015-03-25 Gary Benson <gbenson@redhat.com>
3274 Pedro Alves <palves@redhat.com>
3276 * target.c (fileio_ft_t): New typedef, define object vector.
3277 (fileio_fhandles): New static variable.
3278 (is_closed_fileio_fh): New macro.
3279 (lowest_closed_fd): New static variable.
3280 (acquire_fileio_fd): New function.
3281 (release_fileio_fd): Likewise.
3282 (fileio_fd_to_fh): New macro.
3283 (target_fileio_open): Wrap the file descriptor on success.
3284 (target_fileio_pwrite): Updated to use wrapped file descriptor.
3285 (target_fileio_pread): Likewise.
3286 (target_fileio_close): Likewise.
3288 2015-03-24 Pedro Alves <palves@redhat.com>
3290 * thread.c (thread_apply_all_command): Take exited threads into
3293 2015-03-24 Pedro Alves <palves@redhat.com>
3295 * infrun.c (resume, proceed): Mention
3296 switch_back_to_stepped_thread, not switch_back_to_stepping.
3298 2015-03-24 Pedro Alves <palves@redhat.com>
3300 * infrun.c (user_visible_resume_ptid): Rewrite going from
3301 most-locked to unlocked instead of the opposite. Move comment ...
3302 * infrun.h (user_visible_resume_ptid): ... here.
3304 2015-03-24 Pedro Alves <palves@redhat.com>
3306 * linux-nat.c (linux_nat_resume): Output debug logs before trying
3307 to resume the event lwp. Use the lwp's ptid instead of the passed
3308 in (maybe wildcard) ptid.
3309 (stop_wait_callback): Tweak debug log output.
3310 (check_stopped_by_breakpoint): Tweak debug log output. Also dump
3312 (linux_nat_filter_event): In debug output, distinguish a
3313 resume_stop SIGSTOP from a delayed SIGSTOP. Output debug logs
3314 before trying to resume the lwp.
3316 2015-03-24 Joel Brobecker <brobecker@adacore.com>
3318 * gdbtypes.h (struct dynamic_prop_list) <prop>: Remove
3319 pointer indirection.
3320 * gdbtypes.c (get_dyn_prop): Adjust, following change above.
3321 (add_dyn_prop, copy_dynamic_prop_list): Likewise.
3323 2015-03-24 Joel Brobecker <brobecker@adacore.com>
3325 * gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_DATA_LOCATION>:
3326 Renames DYN_ATTR_DATA_LOCATION.
3327 (TYPE_DATA_LOCATION): Use DYN_PROP_DATA_LOCATION instead of
3328 DYN_ATTR_DATA_LOCATION.
3329 * dwarf2read.c (set_die_type): Use DYN_PROP_DATA_LOCATION
3330 instead of DYN_ATTR_DATA_LOCATION.
3332 2015-03-24 Pedro Alves <palves@redhat.com>
3334 * breakpoint.c (until_break_command): Adjust call to proceed.
3335 * gdbthread.h (struct thread_control_state) <stepping_command>:
3337 * infcall.c (run_inferior_call): Adjust call to proceed.
3338 * infcmd.c (run_command_1, proceed_thread_callback, continue_1):
3339 Adjust calls to proceed.
3340 (set_step_frame): Set the current thread's step_start_function
3342 (step_once): Adjust calls to proceed.
3343 (jump_command, signal_command, until_next_command)
3344 (finish_backward, finish_forward, proceed_after_attach_callback)
3345 (attach_command_post_wait): Adjust calls to proceed.
3346 * infrun.c (proceed_after_vfork_done): Adjust call to proceed.
3347 (do_target_resume): New function, factored out from ...
3348 (resume): ... here. Remove 'step' parameter. Instead, check
3349 currently_stepping to determine whether the thread should be
3351 (proceed): Remove 'step' parameter and don't set the thread's
3352 step_start_function here. Adjust call to 'resume'.
3353 (handle_inferior_event): Adjust calls to 'resume'.
3354 (switch_back_to_stepped_thread): Use do_target_resume instead of
3356 (keep_going): Adjust calls to 'resume'.
3357 * infrun.h (proceed): Remove 'step' parameter.
3359 * windows-nat.c (do_initial_windows_stuff): Adjust call to
3361 * mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
3363 2015-03-24 Pedro Alves <palves@redhat.com>
3365 * gdbthread.h (struct thread_control_state) <stepping_command>:
3367 * infcmd.c (step_once): Pass step=1 to clear_proceed_status. Set
3368 the thread's stepping_command field.
3369 * infrun.c (resume): Check the thread's stepping_command flag to
3370 determine which threads should be resumed. Rename 'entry_step'
3372 (clear_proceed_status_thread): Clear 'stepping_command'.
3373 (schedlock_applies): Change parameter type to struct thread_info
3375 (find_thread_needs_step_over): Remove 'step' parameter. Adjust.
3376 (switch_back_to_stepped_thread): Adjust calls to
3377 'schedlock_applies'.
3378 (_initialize_infrun): Adjust "set scheduler-locking step" help.
3380 2015-03-24 Pedro Alves <palves@redhat.com>
3382 * infrun.c (step_start_function): Delete and ...
3383 * gdbthread.h (struct thread_control_state) <step_start_function>:
3384 ... now a field here.
3385 * infrun.c (clear_proceed_status_thread): Clear the thread's
3386 step_start_function.
3387 (proceed, process_event_stop_test, print_stop_event): Adjust.
3389 2015-03-24 Pedro Alves <palves@redhat.com>
3391 * infrun.c (proceed): No longer handle negative step.
3393 2015-03-24 Gary Benson <gbenson@redhat.com>
3395 * nat/x86-linux.h (x86_linux_new_thread): New declaration.
3396 (x86_linux_prepare_to_resume): Likewise.
3397 * x86-linux-nat.c (x86_linux_new_thread):
3398 Moved to nat/x86-linux.c.
3399 (x86_linux_prepare_to_resume): Likewise.
3400 * nat/x86-linux.c (x86_linux_new_thread): New function.
3401 (x86_linux_prepare_to_resume): Likewise.
3403 2015-03-24 Gary Benson <gbenson@redhat.com>
3405 * nat/x86-linux-dregs.h: New file.
3406 * nat/x86-linux-dregs.c: Likewise.
3407 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
3408 (x86-linux-dregs.o): New rule.
3409 * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
3410 * config/i386/linux64.mh (NATDEPFILES): Likewise.
3411 * x86-linux-nat.c: Include nat/x86-linux-dregs.h.
3412 (u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
3413 (x86_linux_dr_get): Likewise.
3414 (x86_linux_dr_set): Likewise.
3415 (x86_linux_dr_get_addr): Likewise.
3416 (x86_linux_dr_get_control): Likewise.
3417 (x86_linux_dr_get_status): Likewise.
3418 (update_debug_registers_callback): Likewise.
3419 (x86_linux_dr_set_control): Likewise.
3420 (x86_linux_dr_set_addr): Likewise.
3421 (x86_linux_update_debug_registers): Likewise.
3423 2015-03-24 Gary Benson <gbenson@redhat.com>
3425 * x86-linux-nat.c (x86_linux_update_debug_registers):
3426 New function, factored out from...
3427 (x86_linux_prepare_to_resume): ...this.
3429 2015-03-24 Gary Benson <gbenson@redhat.com>
3431 * x86-linux-nat.c (x86_linux_dr_get): Update comments.
3432 (x86_linux_dr_set): Likewise.
3433 (x86_linux_dr_get_addr): Likewise.
3434 (x86_linux_dr_get_control): Likewise.
3435 (x86_linux_dr_get_status): Likewise.
3436 (update_debug_registers_callback): Likewise.
3437 (x86_linux_dr_set_control): Likewise.
3438 (x86_linux_dr_set_addr): Likewise.
3439 (x86_linux_prepare_to_resume): Likewise.
3440 (x86_linux_new_thread): Likewise.
3442 2015-03-24 Gary Benson <gbenson@redhat.com>
3444 * x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion.
3445 (x86_linux_new_thread): Rename argument.
3447 2015-03-24 Gary Benson <gbenson@redhat.com>
3449 * nat/x86-linux.h: New file.
3450 * nat/x86-linux.c: Likewise.
3451 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
3452 (x86-linux.o): New rule.
3453 * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
3454 * config/i386/linux64.mh (NATDEPFILES): Likewise.
3455 * nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
3456 (lwp_set_arch_private_info): New declaration.
3457 (lwp_arch_private_info): Likewise.
3458 * linux-nat.c (lwp_set_arch_private_info): New function.
3459 (lwp_arch_private_info): Likewise.
3460 * x86-linux-nat.c: Include nat/x86-linux.h.
3461 (arch_lwp_info): Removed structure.
3462 (update_debug_registers_callback):
3463 Use lwp_set_debug_registers_changed.
3464 (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
3465 and lwp_set_debug_registers_changed.
3466 (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
3468 2015-03-24 Gary Benson <gbenson@redhat.com>
3470 * nat/linux-nat.h (ptid_of_lwp): New declaration.
3471 (lwp_is_stopped): Likewise.
3472 (lwp_stop_reason): Likewise.
3473 * linux-nat.c (ptid_of_lwp): New function.
3474 (lwp_is_stopped): Likewise.
3475 (lwp_is_stopped_by_watchpoint): Likewise.
3476 * x86-linux-nat.c (update_debug_registers_callback):
3478 (x86_linux_prepare_to_resume): Use ptid_of_lwp and
3481 2015-03-24 Gary Benson <gbenson@redhat.com>
3483 * linux-nat.h (linux_stop_lwp): Move declaration to...
3484 * nat/linux-nat.h (linux_stop_lwp): New declaration.
3486 2015-03-24 Gary Benson <gbenson@redhat.com>
3488 * linux-nat.h: Include nat/linux-nat.h.
3489 (iterate_over_lwps): Move declaration to nat/linux-nat.h.
3490 * nat/linux-nat.h (struct lwp_info): New forward declaration.
3491 (iterate_over_lwps_ftype): New typedef.
3492 (iterate_over_lwps): New declaration.
3493 * linux-nat.h (iterate_over_lwps): Update comment. Use
3494 iterate_over_lwps_ftype. Update callback return value check.
3496 2015-03-24 Gary Benson <gbenson@redhat.com>
3498 * x86-nat.h (x86_debug_reg_state): Move declaration to...
3499 * nat/x86-dregs.h (x86_debug_reg_state): New declaration.
3501 2015-03-24 Gary Benson <gbenson@redhat.com>
3503 * nat/linux-nat.h (current_lwp_ptid): New declaration.
3504 * linux-nat.c (current_lwp_ptid): New function.
3505 * x86-linux-nat.c: Include nat/linux-nat.h.
3506 (x86_linux_dr_get_addr): Use current_lwp_ptid.
3507 (x86_linux_dr_get_control): Likewise.
3508 (x86_linux_dr_get_status): Likewise.
3509 (x86_linux_dr_set_control): Likewise.
3510 (x86_linux_dr_set_addr): Likewise.
3512 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
3514 PR breakpoints/16466
3515 * breakpoint.c (create_breakpoint): Set thread on breakpoint struct.
3517 2015-03-23 Joel Brobecker <brobecker@adacore.com>
3519 * ser-mingw.c (ser_windows_setparity): Fix indentation.
3520 * ser-unix.c (hardwire_setparity): Likewise.
3522 2015-03-23 Yurij Grechishhev <yurij.grechishhev@gmail.com>
3524 * NEWS: Mention set/show serial parity command.
3525 * monitor.c (monitor_open): Call serial_setparity.
3526 * remote.c (remote_open_1): Likewise.
3527 * ser-base.c (ser_base_serparity): New function.
3528 * ser-base.h (ser_base_setparity): Add declaration.
3529 * ser-go32.c (dos_ops): Set "setparity" field.
3530 * ser-mingw.c (ser_windows_raw): Do not set state.fParity and
3532 (ser_windows_setparity): New function.
3533 (hardwire_ops): Add ser_windows_setparity.
3534 (tty_ops): Add NULL for setparity field.
3535 (pipe_ops): Add ser_base_setparity.
3536 (tcp_ops): Likewise.
3537 * ser-pipe.c (pipe_ops): Likewise.
3538 * ser-tcp.c (tcp_ops): Likewise.
3539 * ser-unix.c (hardwire_setparity): Add declaration.
3540 (hardwire_raw): Don't reset PARENB flag.
3541 (hardwire_setparity): New function.
3542 (hardwire_ops): Add hardwire_setparity.
3543 * serial.c (serial_setparity): New function.
3544 (serial_parity): New global.
3545 (parity_none, parity_odd, parity_even, parity_enums, parity):
3547 (set_parity): New function.
3548 (_initialize_serial): Add set/show serial parity commands.
3549 * serial.h (GDBPARITY_NONE): Define.
3550 (GDBPARITY_ODD): Define.
3551 (GDBPARITY_EVEN): Define.
3552 (serial_setparity) Add declaration.
3553 (struct serial_ops): Add setparity field.
3554 * target.h (serial_parity): Add declaration.
3556 2015-03-23 Keith Seitz <keiths@redhat.com>
3558 * linespec.c (linespec_lexer_lex_keyword): Update comment.
3560 2015-03-23 Keith Seitz <keiths@redhat.com>
3562 * breakpoint.c (parse_breakpoint_sals): Use
3563 linespec_lexer_lex_keyword to ascertain if the user specified
3565 * linespec.c [IF_KEYWORD_INDEX]: Define.
3566 (linespec_lexer_lex_keyword): Export.
3567 (struct ls_parser) <keyword_ok>: Remove.
3568 A keyword is only a keyword if not followed by another keyword.
3569 (linespec_lexer_lex_one): Remove keyword_ok handling.
3570 Add comment explaining why the parsing stream is not advanced
3571 when a keyword is seen.
3572 (parse_linespec): Remove parser->keyword_ok.
3573 * linespec.h (linespec_lexer_lex_keyword): Add declaration.
3575 2015-03-23 Keith Seitz <keiths@redhat.com>
3578 * dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
3579 if we find a static method with DW_AT_vtable_elem_location.
3581 2015-03-21 Eli Zaretskii <eliz@gnu.org>
3583 * tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
3584 before the second loop, to avoid undefined behavior. Reported by
3585 Anton Blanchard <anton@samba.org>.
3587 2015-03-20 Keven Boell <keven.boell@intel.com>
3589 * gdbtypes.c (resolve_dynamic_type_internal): Adapt
3590 data_location usage to linked list.
3591 (resolve_dynamic_type_internal): Adapt data_location to
3593 (get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
3594 (copy_type_recursive, copy_type): Add copy of linked list.
3595 * gdbtypes.h (enum dynamic_prop_node_kind): New enum.
3596 (struct dynamic_prop_list): New struct.
3597 * dwarf2read.c (set_die_type): Set data_location data.
3599 2015-03-20 Pedro Alves <palves@redhat.com>
3601 * i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
3602 inner block and make it const.
3603 * machoread.c (get_archive_prefix_len): Make "lparen" const.
3605 2015-03-20 Pedro Alves <palves@redhat.com>
3607 * breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
3608 * breakpoint.h (set_breakpoint_condition): Update declaration.
3610 2015-03-20 Pedro Alves <palves@redhat.com>
3612 * tui/tui-io.c (tui_expand_tabs): Make "s1" const.
3614 2015-03-20 Pedro Alves <palves@redhat.com>
3616 * xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
3618 2015-03-20 Pedro Alves <palves@redhat.com>
3620 * remote-m32r-sdi.c (m32r_open): Make "port_str" const.
3622 2015-03-20 Pedro Alves <palves@redhat.com>
3624 * nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
3625 (nto_init_solib_absolute_prefix): Likewise.
3627 2015-03-20 Pedro Alves <palves@redhat.com>
3629 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
3630 * spu-tdep.c (spu_gdbarch_init): Make "name" const.
3632 2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
3634 * config/djgpp/README: Remove gdb.hp.
3636 2015-03-20 Yao Qi <yao.qi@linaro.org>
3638 * aarch64-tdep.c (aarch64_gdbarch_init): Don't call
3639 set_gdbarch_cannot_step_breakpoint.
3641 2015-03-19 Pedro Alves <palves@redhat.com>
3643 * linux-nat.c (linux_resume_one_lwp): Rename to ...
3644 (linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
3645 instead call perror_with_name.
3646 (check_ptrace_stopped_lwp_gone): New function.
3647 (linux_resume_one_lwp): Reimplement as wrapper around
3648 linux_resume_one_lwp_throw that swallows errors if the LWP is
3650 (resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
3651 swallows errors if the LWP is gone. Use
3652 linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
3654 2015-03-19 Pedro Alves <palves@redhat.com>
3656 * linux-nat.c (status_callback): Return early if the LWP has no
3659 2015-03-19 Pedro Alves <palves@redhat.com>
3661 * linux-nat.c (select_event_lwp_callback): Update comment to no
3662 longer mention SIGTRAP.
3664 2015-03-18 Tristan Gingold <gingold@adacore.com>
3666 * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
3667 redirection code to ...
3668 (amd64_windows_frame_decode_insns): ... Here. Fix in prologue
3669 checks. Fix SAVE_NONVOL operations. Add debug code and comments.
3671 2015-03-18 Gary Benson <gbenson@redhat.com>
3673 (remote_protocol_features): Remove the "vFile:fstat" feature.
3674 (remote_hostio_fstat): Probe for "vFile:fstat" support.
3676 2015-03-11 Yao Qi <yao.qi@linaro.org>
3679 * aarch64-linux-tdep.c: Include xml-syscall.h
3680 (aarch64_linux_get_syscall_number): New function.
3681 (aarch64_linux_init_abi): Call
3682 set_gdbarch_get_syscall_number.
3683 * syscalls/aarch64-linux.xml: New file.
3685 2015-03-17 Yurij Grechishhev <yurij.grechishhev@gmail.com>
3687 * ser-base.h (ser_base_setstopbits): Change second argument name
3688 from "rate" to "num".
3690 2015-03-17 Gary Benson <gbenson@redhat.com>
3691 Luke Allardyce <lukeallardyce@gmail.com>
3694 * common/common-remote-fileio.h (sys/stat.h): New include.
3695 (stuct stat): Remove forward declaration.
3697 2015-03-16 John Baldwin <jhb@FreeBSD.org>
3699 * fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
3700 before writing core register notes.
3702 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
3703 Pedro Alves <palves@redhat.com>
3705 * gdb_curses.h (tgetnum): Mark with EXTERN_C.
3706 * stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
3707 (tgoto): Wrap with extern "C".
3709 2015-03-16 Pedro Alves <palves@redhat.com>
3710 Yuanhui Zhang <asmwarrior@gmail.com>
3712 * stub-termcap.c (tputs): Change prototype.
3714 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
3715 Pedro Alves <palves@redhat.com>
3717 * windows-nat.c (struct thread_info_struct): Rename to ...
3718 (struct windows_thread_info_struct): ... this.
3719 (thread_info): Rename to ...
3720 (windows_thread_info): ... this.
3723 2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
3724 Pedro Alves <palves@redhat.com>
3726 * NEWS: New Removed targets and native configurations.
3728 2015-03-13 Jan Kratochvil <jan.kratochvil@redhat.com>
3731 * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
3732 (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
3733 (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
3734 ia64-hpux-tdep.h, solib-ia64-hpux.h.
3735 (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
3736 ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
3737 * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
3739 * config/ia64/hpux.mh: Remove file.
3740 * config/pa/hpux.mh: Remove file.
3741 * configure: Rebuilt.
3742 * configure.ac (dlgetmodinfo, somread.o): Remove.
3743 * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
3744 (ia64-*-hpux*): Remove its float format exception.
3745 * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
3746 * hppa-hpux-nat.c: Remove file.
3747 * hppa-hpux-tdep.c: Remove file.
3748 * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
3749 Move them here from hppa-tdep.h
3750 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
3751 (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
3752 * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
3753 Move them to hppa-tdep.c.
3754 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
3756 * ia64-hpux-nat.c: Remove file.
3757 * ia64-hpux-tdep.c: Remove file.
3758 * ia64-hpux-tdep.h: Remove file.
3759 * inf-ttrace.c: Remove file.
3760 * inf-ttrace.h: Remove file.
3761 * solib-ia64-hpux.c: Remove file.
3762 * solib-ia64-hpux.h: Remove file.
3763 * solib-pa64.c: Remove file.
3764 * solib-pa64.h: Remove file.
3765 * solib-som.c: Remove file.
3766 * solib-som.h: Remove file.
3767 * somread.c: Remove file.
3769 2015-03-13 John Baldwin <jhb@FreeBSD.org>
3771 * configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
3772 * config.in: Regenerate.
3773 * configure: Regenerate.
3774 * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
3776 (fbsd_find_memory_regions): Use kinfo_getvmmap to
3777 enumerate memory regions if present.
3779 2015-03-13 John Baldwin <jhb@FreeBSD.org>
3781 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
3782 * i386fbsd-tdep.c: Fix style in various gdb_static_assert
3784 (i386fbsd_sigtramp_p): Likewise.
3786 2015-03-12 John Baldwin <jhb@FreeBSD.org>
3788 * MAINTAINERS (Write After Approval): Add John Baldwin.
3790 2015-03-12 Gary Benson <gbenson@redhat.com>
3792 * solib.c (_initialize_solib): Make "set/show sysroot" use
3793 add_setshow_optional_filename_cmd so it can be restored to
3794 empty after being set.
3796 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
3798 * Makefile.in (SFILES): New source break-catch-syscall.c.
3799 (COMMON_OBS): New object break-catch-syscall.o.
3800 * break-catch-syscall.c: New file.
3801 * breakpoint.c: Remove inclusion of "xml-syscall.h".
3802 (syscall_catchpoint_p): Move declaration to break-catch-syscall.c
3803 (struct syscall_catchpoint): Likewise.
3804 (dtor_catch_syscall): Likewise.
3805 (catch_syscall_inferior_data): Likewise.
3806 (struct catch_syscall_inferior_data): Likewise.
3807 (get_catch_syscall_inferior_data): Likewise.
3808 (catch_syscall_inferior_data_cleanup): Likewise.
3809 (insert_catch_syscall): Likewise.
3810 (remove_catch_syscall): Likewise.
3811 (breakpoint_hit_catch_syscall): Likewise.
3812 (print_it_catch_syscall): Likewise.
3813 (print_one_catch_syscall): Likewise.
3814 (print_mention_catch_syscall): Likewise.
3815 (print_recreate_catch_syscall): Likewise.
3816 (catch_syscall_breakpoint_ops): Likewise.
3817 (syscall_catchpoint_p): Likewise.
3818 (create_syscall_event_catchpoint): Likewise.
3819 (catch_syscall_split_args): Likewise.
3820 (catch_syscall_command_1): Likewise.
3821 (is_syscall_catchpoint_enabled): Likewise.
3822 (catch_syscall_enabled): Likewise.
3823 (catching_syscall_number): Likewise.
3824 (catch_syscall_completer): Likewise.
3825 (clear_syscall_counts): Likewise.
3826 (initialize_breakpoint_ops): Move initialization of syscall
3827 catchpoints to break-catch-syscall.c.
3828 (_initialize_breakpoint): Move code related to syscall catchpoints
3829 to break-catch-syscall.c.
3831 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
3833 * breakpoint.c (breakpoint_find_if): New function.
3834 * breakpoint.h (breakpoint_find_if): New prototype.
3836 2015-03-11 Gary Benson <gbenson@redhat.com>
3838 * remote-fileio.h (remote_fileio_to_host_stat): New declaration.
3839 * remote-fileio.c (remote_fileio_to_host_uint): New function.
3840 (remote_fileio_to_host_ulong): Likewise.
3841 (remote_fileio_to_host_mode): Likewise.
3842 (remote_fileio_to_host_time): Likewise.
3843 (remote_fileio_to_host_stat): Likewise.
3844 * remote.c (PACKET_vFile_fstat): New enum value.
3845 (remote_protocol_features): Register the "vFile:fstat" feature.
3846 (remote_hostio_fstat): New function.
3847 (remote_bfd_iovec_stat): Use the above.
3848 (_initialize_remote): Register new "set/show remote
3849 hostio-fstat-packet" command.
3850 * symfile.c (separate_debug_file_exists): Update comment.
3851 * NEWS: Announce new vFile:fstat packet.
3853 2015-03-11 Gary Benson <gbenson@redhat.com>
3855 * common/common-remote-fileio.h: New file.
3856 * common/common-remote-fileio.c: Likewise.
3857 * Makefile.in (SFILES): Add common/common-remote-fileio.c.
3858 (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
3859 (COMMON_OBS): Add common-remote-fileio.o.
3860 (common-remote-fileio.o): New rule.
3861 * remote-fileio.h (common-remote-fileio.h): New include.
3862 * remote-fileio.c (gdb/fileio.h): Do not include.
3863 (remote_fileio_to_be): Moved to common-remote-fileio.h.
3864 (remote_fileio_to_fio_uint): Likewise.
3865 (remote_fileio_to_fio_time): Likewise.
3866 (remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
3867 (remote_fileio_to_fio_mode): Likewise.
3868 (remote_fileio_to_fio_ulong): Likewise.
3869 (remote_fileio_to_fio_stat): Likewise.
3871 2015-03-11 Andy Wingo <wingo@igalia.com>
3873 * guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
3874 we were checking the cached type, not the cached dynamic type.
3876 2015-03-11 Andy Wingo <wingo@igalia.com>
3878 * guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
3879 other strings, as these are on the GC'd heap, and will be
3880 collected along with the smob.
3882 2015-03-11 Andy Wingo <wingo@igalia.com>
3884 * guile/scm-objfile.c (gdbscm_objfile_progspace): New function.
3885 (objfile_functions): Bind gdbscm_objfile_progspace to
3887 * guile/lib/gdb.scm: Add objfile-progspace to exports.
3889 2015-03-11 Andy Wingo <wingo@igalia.com>
3891 * guile/guile.c (_initialize_guile): Disable automatic
3892 finalization, if Guile offers us that possibility.
3893 * guile/guile.c (call_initialize_gdb_module):
3894 * guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
3895 finalizers in appropriate places.
3896 * configure.ac (AC_TRY_LIBGUILE): Add a check for
3897 scm_set_automatic_finalization_enabled.
3898 * configure: Regenerated.
3900 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
3902 * s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
3905 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
3907 * s390-linux-nat.c (struct arch_lwp_info): New.
3908 (s390_fix_watch_points): Rename to...
3909 (s390_prepare_to_resume): ...this. Skip the PER info update
3910 unless the watch points have changed.
3911 (s390_refresh_per_info, s390_new_thread): New functions.
3912 (s390_insert_watchpoint): Call s390_refresh_per_info instead of
3913 s390_fix_watch_points.
3914 (s390_remove_watchpoint): Likewise.
3915 (_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
3916 Register s390_prepare_to_resume.
3918 2015-03-09 Pedro Alves <palves@redhat.com>
3921 2015-03-07 Pedro Alves <palves@redhat.com>
3922 * common/gdb_socket.h: New file.
3923 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
3925 (net_open): Use union gdb_sockaddr_u.
3927 2015-03-07 Pedro Alves <palves@redhat.com>
3929 * configure.ac (build_warnings): Move -Wmissing-prototypes
3930 -Wdeclaration-after-statement -Wmissing-parameter-type
3931 -Wold-style-declaration -Wold-style-definition to the C-specific
3933 * configure: Regenerate.
3935 2015-03-07 Pedro Alves <palves@redhat.com>
3937 * common/gdb_socket.h: New file.
3938 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
3940 (net_open): Use union gdb_sockaddr_u.
3942 2015-03-07 Pedro Alves <palves@redhat.com>
3944 * common/common-exceptions.c [!__cplusplus] (enum catcher_state)
3945 (exceptions_state_mc_action_iter)
3946 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
3948 [__cplusplus] (try_scope_depth): New global.
3949 [__cplusplus] (exception_try_scope_entry)
3950 (exception_try_scope_exit, gdb_exception_sliced_copy)
3951 (exception_rethrow): New functions.
3952 (throw_exception): In C++ mode, throw
3953 gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
3954 gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
3955 (throw_it): In C++ mode, use try_scope_depth.
3956 * common/common-exceptions.h [!__cplusplus]
3957 (exceptions_state_mc_action_iter)
3958 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
3960 [__cplusplus] (exception_try_scope_entry)
3961 (exception_try_scope_exit, exception_rethrow): Declare.
3962 [__cplusplus] (struct exception_try_scope): New struct.
3963 [__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
3965 (struct gdb_exception_RETURN_MASK_ALL)
3966 (struct gdb_exception_RETURN_MASK_ERROR)
3967 (struct gdb_exception_RETURN_MASK_QUIT): New types.
3969 2015-03-07 Pedro Alves <palves@redhat.com>
3971 * main.c (handle_command_errors): Remove volatile qualifier from
3974 2015-03-07 Pedro Alves <palves@redhat.com>
3976 * breakpoint.c (save_breakpoints): Adjust to avoid code between
3978 * gdbtypes.c (safe_parse_type): Remove empty line.
3979 (types_deeply_equal):
3980 * guile/scm-frame.c (gdbscm_frame_name):
3981 * linux-thread-db.c (find_new_threads_once):
3982 * python/py-breakpoint.c (bppy_get_commands):
3983 * record-btrace.c (record_btrace_insert_breakpoint)
3984 (record_btrace_remove_breakpoint, record_btrace_start_replaying)
3985 (record_btrace_start_replaying): Adjust to avoid code between TRY
3988 2015-03-07 Pedro Alves <palves@redhat.com>
3990 * common/common-exceptions.c (struct catcher) <exception>: No
3991 longer a pointer to volatile exception. Now an exception value.
3992 <mask>: Delete field.
3993 (exceptions_state_mc_init): Remove all parameters. Adjust.
3994 (exceptions_state_mc): No longer pop the catcher here.
3995 (exceptions_state_mc_catch): New function.
3996 (throw_exception): Adjust.
3997 * common/common-exceptions.h (exceptions_state_mc_init): Remove
3999 (exceptions_state_mc_catch): Declare.
4000 (TRY_CATCH): Rename to ...
4001 (TRY): ... this. Remove EXCEPTION and MASK parameters.
4002 (CATCH, END_CATCH): New.
4003 All callers adjusted.
4005 2015-03-07 Tom Tromey <tromey@redhat.com>
4007 * top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX.
4009 2015-03-07 Pedro Alves <palves@redhat.com>
4011 * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
4012 (amd64_epilogue_frame_cache): Normal exception handling code.
4013 * break-catch-throw.c (check_status_exception_catchpoint)
4014 (re_set_exception_catchpoint): Ditto.
4015 * cli/cli-interp.c (safe_execute_command):
4016 * cli/cli-script.c (script_from_file): Ditto.
4017 * compile/compile-c-symbols.c (generate_c_for_for_one_variable):
4019 * compile/compile-object-run.c (compile_object_run): Ditto.
4020 * cp-abi.c (baseclass_offset): Ditto.
4021 * cp-valprint.c (cp_print_value): Ditto.
4022 * exceptions.c (catch_exceptions_with_msg):
4023 * frame-unwind.c (frame_unwind_try_unwinder): Ditto.
4024 * frame.c (get_frame_address_in_block_if_available): Ditto.
4025 * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
4026 (i386_sigtramp_frame_cache): Ditto.
4027 * infcmd.c (post_create_inferior): Ditto.
4028 * linespec.c (parse_linespec, find_linespec_symbols):
4029 * p-valprint.c (pascal_object_print_value): Ditto.
4030 * parse.c (parse_expression_for_completion): Ditto.
4031 * python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
4032 * remote.c (remote_get_noisy_reply): Ditto.
4033 * s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
4034 * solib-svr4.c (solib_svr4_r_map): Ditto.
4036 2015-03-06 Gary Benson <gbenson@redhat.com>
4038 * common/common-utils.h (startswith): New inline function.
4039 All places where this logic was used updated to use the above.
4041 2015-03-05 Pedro Alves <palves@redhat.com>
4044 * mem-break.c (default_memory_insert_breakpoint): Set shadow_len
4045 after reading the breakpoint's shadow memory.
4047 2015-03-05 Mark Kettenis <kettenis@gnu.org>
4049 * hppabsd-nat.c: Remove file.
4050 * hppaobsd-nat.c: New file.
4051 * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c. Add
4053 * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
4056 2015-03-04 Pedro Alves <palves@redhat.com>
4058 * target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
4059 (target_decr_pc_after_break): Delete declaration.
4060 * target.c (default_target_decr_pc_after_break)
4061 (target_decr_pc_after_break): Delete.
4062 * linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
4063 gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
4064 * linux-thread-db.c (check_event): Likewise.
4065 * infrun.c (adjust_pc_after_break): Likewise.
4066 * darwin-nat.c (cancel_breakpoint): Likewise.
4067 * aix-thread.c (aix_thread_wait): Likewise.
4068 * target-delegates.c: Regenerate.
4070 2015-03-04 Pedro Alves <palves@redhat.com>
4072 * linux-nat.c (save_sigtrap): Check for breakpoints before
4073 checking watchpoints.
4074 (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a
4075 breakpoint is inserted if relying on SIGTRAP's siginfo.si_code.
4076 (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether
4077 a breakpoint triggered based on the SIGTRAP's siginfo.si_code.
4078 (linux_nat_stopped_by_sw_breakpoint)
4079 (linux_nat_supports_stopped_by_sw_breakpoint)
4080 (linux_nat_stopped_by_hw_breakpoint)
4081 (linux_nat_supports_stopped_by_hw_breakpoint): New functions.
4082 (linux_nat_wait_1): Don't re-increment the PC if relying on
4083 SIGTRAP's siginfo->si_code.
4084 (linux_nat_add_target): Install new target methods.
4085 * linux-thread-db.c (check_event): Don't account for breakpoint PC
4086 offset if the target already adjusted the PC.
4087 * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New.
4088 (GDB_ARCH_TRAP_BRKPT): New.
4089 (TRAP_HWBKPT): Define if not already defined.
4091 2015-03-04 Pedro Alves <palves@redhat.com>
4093 * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
4094 * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
4096 <stop_reason>: New field.
4097 (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
4098 (packet_set_cmd_state): New function.
4099 (remote_protocol_features): Register the "swbreak" and "hwbreak"
4101 (remote_query_supported): If not disabled with the corresponding
4102 "set remote foo-packet" command, report support for the swbreak
4103 and hwbreak features.
4104 (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
4106 <stop_reason>: New field.
4107 (remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
4108 (remote_wait_as): Adjust.
4109 (remote_stopped_by_sw_breakpoint)
4110 (remote_supports_stopped_by_sw_breakpoint)
4111 (remote_stopped_by_hw_breakpoint)
4112 (remote_supports_stopped_by_hw_breakpoint): New functions.
4113 (remote_stopped_by_watchpoint): New function.
4114 (init_remote_ops): Install them.
4115 (_initialize_remote): Register new "set/show remote
4116 swbreak-feature-packet" and "set/show remote
4117 swbreak-feature-packet" commands.
4119 2015-03-04 Pedro Alves <palves@redhat.com>
4121 * btrace.h: Include target/waitstatus.h.
4122 (struct btrace_thread_info) <stop_reason>: New field.
4123 * record-btrace.c (record_btrace_step_thread): Use
4124 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
4125 (record_btrace_decr_pc_after_break): Delete.
4126 (record_btrace_stopped_by_sw_breakpoint)
4127 (record_btrace_supports_stopped_by_sw_breakpoint)
4128 (record_btrace_stopped_by_hw_breakpoint)
4129 (record_btrace_supports_stopped_by_hw_breakpoint): New functions.
4130 (init_record_btrace_ops): Install them.
4131 * record-full.c (record_full_hw_watchpoint): Delete and replace
4133 (record_full_stop_reason): ... this throughout.
4134 (record_full_exec_insn): Adjust.
4135 (record_full_wait_1): Adjust. No longer re-increment the PC.
4136 (record_full_wait_1): Adjust. Use
4137 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
4138 (record_full_stopped_by_watchpoint): Adjust.
4139 (record_full_stopped_by_sw_breakpoint)
4140 (record_full_supports_stopped_by_sw_breakpoint)
4141 (record_full_supports_stopped_by_sw_breakpoint)
4142 (record_full_stopped_by_hw_breakpoint)
4143 (record_full_supports_stopped_by_hw_breakpoint): New functions.
4144 (init_record_full_ops, init_record_full_core_ops): Install them.
4145 * record.c (record_check_stopped_by_breakpoint): New function.
4146 * record.h: Include target/waitstatus.h.
4147 (record_check_stopped_by_breakpoint): New declaration.
4149 2015-03-04 Pedro Alves <palves@redhat.com>
4151 enum lwp_stop_reason -> enum target_stop_reason
4152 * linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint)
4153 (linux_nat_stopped_by_watchpoint, status_callback)
4154 (linux_nat_wait_1): Adjust.
4155 * linux-nat.h (enum lwp_stop_reason): Delete.
4156 (struct lwp_info) <stop_reason>: Now an enum target_stop_reason.
4157 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
4158 * target/waitstatus.h (enum target_stop_reason): New.
4160 2015-03-04 Pedro Alves <palves@redhat.com>
4162 * breakpoint.c (need_moribund_for_location_type): New function.
4163 (bpstat_stop_status): Don't skipping checking moribund locations
4164 of breakpoint types which the target tell caused a stop.
4165 (program_breakpoint_here_p): New function, factored out from ...
4166 (bp_loc_is_permanent): ... this.
4167 (update_global_location_list): Don't create a moribund location if
4168 the target supports reporting stops of the type of the removed
4170 * breakpoint.h (program_breakpoint_here_p): New declaration.
4171 * infrun.c (adjust_pc_after_break): Return early if the target has
4172 already adjusted the PC. Add comments.
4173 (handle_signal_stop): If nothing explains a signal, and the target
4174 tells us the stop was caused by a software breakpoint, check if
4175 there's a breakpoint instruction in the memory. If so, adjust the
4176 PC before presenting the stop to the user. Otherwise, ignore the
4177 trap. If nothing explains a signal, and the target tells us the
4178 stop was caused by a hardware breakpoint, ignore the trap.
4179 * target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
4180 to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
4181 to_supports_stopped_by_hw_breakpoint>: New fields.
4182 (target_stopped_by_sw_breakpoint)
4183 (target_supports_stopped_by_sw_breakpoint)
4184 (target_stopped_by_hw_breakpoint)
4185 (target_supports_stopped_by_hw_breakpoint): Define.
4186 * target-delegates.c: Regenerate.
4188 2015-03-04 Pedro Alves <palves@redhat.com>
4190 * infrun.c (follow_fork_inferior): Use the whole of the
4191 inferior_ptid and pending_follow.related_pid ptids instead of
4192 building ptids from the process components. Adjust verbose output
4193 to use target_pid_to_str.
4194 * linux-nat.c (linux_child_follow_fork): Use the whole of the
4195 inferior_ptid and pending_follow.related_pid ptids instead of
4196 building ptids from the process components.
4198 2015-03-04 Mark Kettenis <kettenis@gnu.org>
4200 * inf-ptrace.c [PT_GET_PROCESS_STATE]
4201 (inf_ptrace_insert_fork_catchpoint): New function.
4202 (inf_ptrace_remove_fork_catchpoint): New function.
4203 (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.
4205 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
4207 * s390-linux-tdep.c (s390_register_name): Return empty string
4208 instead of NULL for registers that shouldn't be visible.
4210 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
4212 * s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
4213 XML file for 64-bit targets.
4215 2015-03-03 Simon Marchi <simon.marchi@ericsson.com>
4217 * target.h (find_default_create_inferior): Remove declaration.
4218 (find_default_attach): Likewise.
4220 2015-03-03 Pedro Alves <palves@redhat.com>
4222 * inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
4223 Use ptid_get_pid to get the overall process id when resuming all
4226 2015-03-03 Pedro Alves <palves@redhat.com>
4228 * i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
4229 the lwp field of ptid. Pass the full ptid to get_thread_regcache.
4230 * inf-ptrace.c (get_ptrace_pid): New function.
4231 (inf_ptrace_resume): Use it.
4232 * linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
4235 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
4237 * nat/linux-btrace.c: Include sys/utsname.h.
4238 (linux_determine_kernel_ptr_bits): New.
4239 (linux_enable_bts): Call linux_determine_kernel_ptr_bits.
4240 * x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
4243 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
4245 * btrace.c (ftrace_update_function): Treat return as tailcall for
4246 "_dl_runtime_resolve".
4248 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
4250 * btrace.h (btrace_function) <lbegin, lend>: Remove.
4251 * btrace.c (ftrace_debug): Do not print the line range.
4252 (ftrace_skip_file, ftrace_update_lines): Remove.
4253 (ftrace_new_function): Remove lbegin and lend initialization.
4254 (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
4255 * record-btrace.c (btrace_compute_src_line_range): New.
4256 (btrace_call_history_src_line): Call btrace_compute_src_line_range.
4258 2015-03-02 Pedro Alves <palves@redhat.com>
4260 * infrun.c (follow_exec): Delete all threads of the process except
4261 the event thread. Extended comments.
4263 2015-03-02 Joel Brobecker <brobecker@adacore.com>
4265 * contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".
4267 2015-03-02 Joel Brobecker <brobecker@adacore.com>
4269 * utils.h: Remove <stdbool.h> #include.
4270 (producer_is_gcc): Change return type to "int".
4271 * utils.c (producer_is_gcc): Change return type to int.
4272 Return 1 instead of true, and 0 instead of false.
4273 Adjust function documentation accordingly.
4275 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
4277 * s390-linux-nat.c (have_regset_vxrs): New static variable.
4278 (s390_linux_fetch_inferior_registers): Handle vector registers, if
4280 (s390_linux_store_inferior_registers): Likewise.
4281 (s390_get_hwcap): Remove function. Embed its logic...
4282 (s390_read_description): ...here. Yield a target description with
4283 vector registers if applicable.
4284 * s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
4285 "features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
4286 "features/s390x-tevx-linux64.c".
4287 (struct gdbarch_tdep) <v0_full_regnum>: New field.
4288 (s390_dwarf_regmap): Add vector registers. Remove bogus entries
4289 for "GNU/Linux-specific registers".
4290 (s390_dwarf_reg_r0l): New enum value.
4291 (s390_dwarf_reg_to_regnum): Support vector registers.
4292 (s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
4293 of GPR lower halves.
4294 (regnum_is_vxr_full): New function.
4295 (s390_register_name): New function.
4296 (s390_pseudo_register_name): Handle v0-v15, which are composed of
4297 f0-f15 and v0l-v15l.
4298 (s390_pseudo_register_type): Likewise.
4299 (s390_pseudo_register_read): Likewise.
4300 (s390_pseudo_register_write): Likewise.
4301 (s390_value_from_register): Account for the fact that values are
4302 placed left-justified in vector registers.
4303 (s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
4304 the vector reggroup and omit them from the general reggroup.
4305 (s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
4306 (s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
4307 (s390_iterate_over_regset_sections): Add iterations for the two
4309 (s390_core_read_description): Yield a target description with
4310 vector registers if applicable.
4311 (s390_gdbarch_init): Handle target descriptions with vector
4312 registers. Add "register_name" gdbarch method.
4313 (_initialize_s390_tdep): Call new tdesc initialization functions.
4314 * s390-linux-tdep.h (HWCAP_S390_VX): New macro.
4315 (S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
4316 (S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
4317 (S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
4318 (S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
4319 (S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
4320 (S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
4321 (S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
4322 (S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
4323 (S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
4324 (S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
4325 (S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
4326 (S390_V30_REGNUM, S390_V31_REGNUM): New macros.
4327 (S390_NUM_REGS): Adjust value.
4328 (s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
4329 (tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
4330 (tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
4331 * NEWS: Announce S/390 vector register support.
4333 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
4335 * features/s390-tevx-linux64.xml: New file.
4336 * features/s390-vx-linux64.xml: New file.
4337 * features/s390-vx.xml: New file.
4338 * features/s390x-tevx-linux64.xml: New file.
4339 * features/s390x-vx-linux64.xml: New file.
4340 * features/Makefile (WHICH): Add s390-vx-linux64,
4341 s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
4342 (s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
4343 (s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
4345 * features/s390-tevx-linux64.c: New generated file.
4346 * features/s390-vx-linux64.c: Likewise.
4347 * features/s390x-tevx-linux64.c: Likewise.
4348 * features/s390x-vx-linux64.c: Likewise.
4349 * regformats/s390-tevx-linux64.dat: Likewise.
4350 * regformats/s390-vx-linux64.dat: Likewise.
4351 * regformats/s390x-tevx-linux64.dat: Likewise.
4352 * regformats/s390x-vx-linux64.dat: Likewise.
4354 2015-02-28 Doug Evans <xdje42@gmail.com>
4356 * symtab.h (struct symtab) <next>: Fix comment.
4358 2015-02-27 Simon Marchi <simon.marchi@ericsson.com>
4360 * python/python.c (python_GdbModuleDef): Rename GdbMethods to
4363 2015-02-27 Pedro Alves <palves@redhat.com>
4365 * dtrace-probe.c (dtrace_probe_ops): Make extern.
4367 2015-02-27 Pedro Alves <palves@redhat.com>
4369 * common/common-exceptions.h (exception_none): Declare.
4370 * common/common-exceptions.c (exception_none): Moved from
4372 (exceptions_state_mc_init): Use exception_none.
4373 * exceptions.c (exception_none): Move to
4374 common/common-exceptions.c.
4375 * exceptions.h (exception_none): Move to
4376 common/common-exceptions.h.
4378 2015-02-27 Pedro Alves <palves@redhat.com>
4380 * main.c (catch_command_errors, catch_command_errors_const):
4381 Remove 'mask' argument. Adjust.
4382 (captured_main): Adjust callers.
4384 2015-02-27 Pedro Alves <palves@redhat.com>
4386 * python/python-internal.h: Include "extension-priv.h".
4388 2015-02-27 Pedro Alves <palves@redhat.com>
4390 * breakpoint.h (enum print_stop_action): Move further up in the
4393 2015-02-27 Pedro Alves <palves@redhat.com>
4395 * gdbarch.sh: Include regcache.h.
4396 * gdbarch.h: Regenerate.
4398 2015-02-27 Pedro Alves <palves@redhat.com>
4400 * arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>:
4401 Remove duplicate const.
4402 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove
4405 2015-02-27 Pedro Alves <palves@redhat.com>
4407 * cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST.
4408 * guile/guile.c (extension_language_guile): Use EXPORTED_CONST.
4409 * features/feature_to_c.sh: Tag the generated xml_builtin array
4410 with extern const in C++ mode.
4412 2015-02-27 Tom Tromey <tromey@redhat.com>
4414 * minidebug.c (struct lzma_stream): Rename to ...
4415 (struct gdb_lzma_stream): ... this.
4416 (lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust.
4418 2015-02-27 Pedro Alves <palves@redhat.com>
4420 * mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New
4422 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args)
4423 (mi_cmd_stack_list_variables): Use it.
4425 2015-02-27 Pedro Alves <palves@redhat.com>
4427 * x86-linux-nat.c (u_debugreg_offset): New function.
4428 (x86_linux_dr_get, x86_linux_dr_set): Use it.
4430 2015-02-27 Pedro Alves <palves@redhat.com>
4432 * nat/x86-dregs.h (enum target_hw_bp_type): Remove forward
4434 Include break-common.h.
4436 2015-02-27 Tom Tromey <tromey@redhat.com>
4437 Pedro Alves <palves@redhat.com>
4439 * arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
4440 local used to iterate over enums.
4441 * completer.c (signal_completer): Likewise.
4442 * i386-tdep.c (i386_stap_parse_special_token): Likewise.
4443 * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
4444 * tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
4445 * tui/tui-layout.c (next_layout, prev_layout): Likewise.
4446 * tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
4447 (tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
4448 * tui-wingeneral.c (tui_refresh_all): Likewise.
4450 2015-02-27 Pedro Alves <palves@redhat.com>
4452 * target.h: Include "infrun.h".
4454 2015-02-27 Pedro Alves <palves@redhat.com>
4456 * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
4458 2015-02-27 Pedro Alves <palves@redhat.com>
4460 * common/agent.h (IPA_SYM_EXPORTED_NAME): New.
4462 * common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.
4464 2015-02-27 Pedro Alves <palves@redhat.com>
4466 * cli-out.c (_rl_erase_entire_line): Move declaration out of
4467 cli_mld_erase_entire_line, and make it extern "C".
4468 * common/common-defs.h (EXTERN_C): New.
4469 * completer.c (_rl_completion_prefix_display_length)
4470 (_rl_print_completions_horizontally, QSFUNC): Move declarations
4471 out of gdb_display_match_list_1.
4472 (_rl_qsort_string_compare): Move declaration out of
4473 gdb_display_match_list_1, and make it extern "C".
4474 * defs.h (re_comp): Use EXTERN_C.
4475 * maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
4476 and make it extern "C".
4477 (monstartup): Move declaration out of maintenance_set_profile_cmd,
4478 and make it extern "C".
4479 (main): Move declaration out of maintenance_set_profile_cmd.
4480 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
4483 2015-02-27 Pedro Alves <palves@redhat.com>
4485 * python/python.c (GdbMethods): Rename to ...
4486 (python_GdbMethods): ... this and make extern.
4487 (GdbModuleDef): Rename to ...
4488 (python_GdbModuleDef): ... this and make extern.
4490 2015-02-27 Pedro Alves <palves@redhat.com>
4492 * record-btrace.c (set_record_btrace_cmdlist)
4493 (show_record_btrace_cmdlist): Remove redefinitions.
4495 2015-02-27 Tom Tromey <tromey@redhat.com>
4496 Pedro Alves <palves@redhat.com>
4498 * dwarf2-frame.c (enum cfa_how_kind, struct
4499 dwarf2_frame_state_reg_info): Move out of struct
4501 * dwarf2read.c (struct tu_stats): Move out of struct
4503 (struct file_entry): Move out of struct line_header.
4504 (struct nextfield, struct nextfnfield, struct fnfieldlist, struct
4505 typedef_field_list): Move out of struct field_info.
4506 * gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
4507 Move out of struct dynamic_prop.
4508 (union type_owner, union field_location, struct field, struct
4509 range_bounds, union type_specific): Move out of struct main_type.
4510 (struct fn_fieldlist, struct fn_field, struct typedef_field)
4511 (VOFFSET_STATIC): Move out of struct cplus_struct_type.
4512 (struct call_site_target, union call_site_parameter_u, struct
4513 call_site_parameter): Move out of struct call_site.
4514 * m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
4516 (enum srcdest_kind): Move out of struct srcdest.
4517 * main.c (enum cmdarg_kind): Move out of struct cmdarg.
4518 * prologue-value.h (enum prologue_value_kind): Move out of struct
4520 * s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
4522 * stabsread.c (struct nextfield, struct next_fnfieldlist): Move
4523 out of struct field_info.
4524 * symfile.h (struct other_sections): Move out of struct
4526 * symtab.c (struct symbol_cache_slot): Move out struct
4528 * target-descriptions.c (enum tdesc_type_kind): Move out of
4529 typedef struct tdesc_type.
4530 * tui/tui-data.h (enum tui_line_or_address_kind): Move out of
4531 struct tui_line_or_address.
4532 * value.c (enum internalvar_kind, union internalvar_data): Move
4533 out of struct internalvar.
4534 * xtensa-tdep.h (struct ctype_cache): Move out of struct
4537 2015-02-27 Tom Tromey <tromey@redhat.com>
4538 Pedro Alves <palves@redhat.com>
4540 Rename symbols whose names are reserved C++ keywords throughout.
4542 2015-02-27 Pedro Alves <palves@redhat.com>
4544 * Makefile.in (COMPILER): New, get it from autoconf.
4545 (COMPILE.pre, CC_LD): Use COMPILER.
4546 (CXX): Get from autoconf instead.
4547 (CXX_FOR_TARGET): Default to g++ instead of gcc.
4548 * acinclude.m4: Include build-with-cxx.m4.
4549 * build-with-cxx.m4: New file.
4550 * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
4551 Disable -Werror by default if building in C++ mode.
4552 (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
4553 -Wno-narrowing in C++ mode. Only enable -Wpointer-sign in C mode.
4554 Run supported-warning-flags tests with the C++ compiler.
4555 Save/restore CXXFLAGS too.
4556 * configure: Regenerate.
4558 2015-02-27 Pedro Alves <palves@redhat.com>
4560 * libiberty.m4: New file.
4561 * acinclude.m4: Include libiberty.m4.
4562 * configure.ac: Call libiberty_INIT.
4563 * config.in, configure: Regenerate.
4565 2015-02-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
4567 * s390-linux-tdep.c (s390_gcc_target_options): Not just handle
4568 31-bit targets, but 64-bit targets as well.
4569 (s390_gnu_triplet_regexp): New function.
4570 (s390_gdbarch_init): Set the gcc_target_options gdbarch method for
4571 64-bit targets as well. Set the gnu_triplet_regexp gdbarch
4574 2015-02-27 Jon TURNEY <jon.turney@dronecode.org.uk> (tiny patch)
4576 * windows-nat.c (CONTEXT_DEBUGGER): Remove.
4577 (CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS. Incorporate flags
4578 from CONTEXT_DEBUGGER.
4580 2015-02-26 Doug Evans <dje@google.com>
4582 * gdbtypes.c (internal_type_vptr_fieldno): Add missing call to
4584 (set_type_vptr_fieldno): Ditto.
4585 (internal_type_vptr_basetype, set_type_vptr_basetype): Ditto.
4586 * gnu-v3-abi.c (gnuv3_dynamic_class): Ditto.
4588 2015-02-26 Pedro Alves <palves@redhat.com>
4590 * auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
4591 * complaints.c (vcomplaint): Pass argument FMT directly to
4592 printf-like functions instead of complaint->fmt.
4593 * ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
4594 * darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
4595 * compile/compile-loc2c.c (pushf, unary, binary): Add
4597 (do_compile_dwarf_expr_to_c): Pass string literal as format string
4599 (BINARY): Pass string literal as format string to 'binary'.
4600 * compile/compile-object-load.c (link_callbacks_einfo): Add
4602 * guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.
4604 2015-02-26 Pedro Alves <palves@redhat.com>
4606 * windows-termcap.c: Rename to ...
4607 * stub-termcap.c: ... this. Adjust header line.
4608 * Makefile.in (SFILES): Refer to stub-termcap.c instead of
4610 * configure: Regenerate.
4611 * configure.ac: Refer to stub-termcap.o instead of
4613 * gdb_curses.h: Mention stub-termcap.c instead of
4616 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
4618 * compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
4619 (gcc_symbol_address): Call gnu_ifunc_resolve_addr.
4621 2015-02-26 Antoine Tremblay <antoine.tremblay@ericsson.com>
4623 * gdb/infcmd.c (print_return_value): use type_to_string to print type.
4625 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
4627 * elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
4628 bfd_canonicalize_symtab.
4630 2015-02-25 John Baldwin <jhb@FreeBSD.org>
4632 * amd64fbsd-nat.c: Include sys/user.h.
4633 (_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
4634 instead of KERN_PS_STRINGS to locate the signal trampoline.
4635 * i386fbsd-nat.c: Include sys/user.h.
4636 (_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
4637 instead of KERN_PS_STRINGS to locate the signal trampoline.
4638 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New.
4639 (amd64fbsd_sigtramp_p): New.
4640 (amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No
4641 longer set default values.
4642 (amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p".
4643 * i386fbsd-tdep.c (i386fbsd_sigtramp_start)
4644 (i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end)
4645 (i386fbsd_freebsd4_sigtramp_start)
4646 (i386fbsd_freebsd4_sigtramp_middle)
4647 (i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start)
4648 (i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New.
4649 (i386fbsd_sigtramp_p): New.
4650 (i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No
4651 longer set default values.
4652 (i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p".
4654 2015-02-25 John Baldwin <jhb@freebsd.org>
4656 * amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use
4657 get_frame_register instead of frame_unwind_register_unsigned.
4659 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
4662 * compile/compile-c-support.c (c_compute_program): Change // comment.
4663 * compile/compile-object-load.c (setup_sections): Change // comment.
4665 2015-02-26 Joel Brobecker <brobecker@adacore.com>
4668 * iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment.
4670 2015-02-23 Pedro Alves <palves@redhat.com>
4672 * remote.c (skip_to_semicolon): New function.
4673 (remote_parse_stop_reply) <T stop reply>: Use it. Don't
4674 special case the stop reasons that look like hex numbers
4675 upfront. Instead handle real register numbers after matching
4676 all the known stop reasons.
4678 2015-02-21 Doug Evans <dje@google.com>
4680 PR c++/17976, symtab/17821
4681 * cp-namespace.c (cp_search_static_and_baseclasses): New parameter
4682 is_in_anonymous. All callers updated.
4683 (find_symbol_in_baseclass): Ditto.
4684 (cp_lookup_nested_symbol_1): Ditto. Don't search all static blocks
4685 for symbols in an anonymous namespace.
4686 * dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
4687 DW_AT_name directly.
4688 (dwarf2_name): Convert missing namespace name to
4689 CP_ANONYMOUS_NAMESPACE_STR.
4691 2015-02-20 Pedro Alves <palves@redhat.com>
4693 * linux-nat.c (linux_handle_extended_wait): Call
4694 thread_db_notice_clone whenever a new clone LWP is detected.
4695 (linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
4697 * linux-nat.h (thread_db_attach_lwp): Delete declaration.
4698 (thread_db_notice_clone, linux_stop_and_wait_all_lwps)
4699 (linux_unstop_all_lwps): Declare.
4700 * linux-thread-db.c (struct thread_get_info_inout): Delete.
4701 (thread_get_info_callback): Delete.
4702 (thread_from_lwp): Use td_thr_get_info and record_thread.
4703 (thread_db_attach_lwp): Delete.
4704 (thread_db_notice_clone): New function.
4705 (try_thread_db_load_1): If /proc is mounted and shows the
4706 process'es task list, walk over all LWPs and call thread_from_lwp
4707 instead of relying on td_ta_thr_iter.
4708 (attach_thread): Don't call check_thread_signals here. Split the
4709 tail part of the function (which adds the thread to the core GDB
4711 (record_thread): ... this function. Call check_thread_signals
4713 (thread_db_wait): Don't call thread_db_find_new_threads_1. Always
4714 call thread_from_lwp.
4715 (thread_db_update_thread_list): Rename to ...
4716 (thread_db_update_thread_list_org): ... this.
4717 (thread_db_update_thread_list): New function.
4718 (thread_db_find_thread_from_tid): Delete.
4719 (thread_db_get_ada_task_ptid): Simplify.
4720 * nat/linux-procfs.c: Include <sys/stat.h>.
4721 (linux_proc_task_list_dir_exists): New function.
4722 * nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.
4724 2015-02-20 Pedro Alves <palves@redhat.com>
4726 * linux-nat.c (lin_lwp_attach_lwp): No longer special case the
4727 main LWP. Handle the case of waitpid returning 0 if we're already
4728 attached to the LWP. Don't set the LWP's last_resume_kind to
4729 resume_stop if we already knew about the LWP.
4730 (linux_nat_filter_event): Add debug logs.
4732 2015-02-20 Pedro Alves <palves@redhat.com>
4734 * target.h (forward_target_decr_pc_after_break): Delete
4737 2015-02-20 Pedro Alves <palves@redhat.com>
4740 * linux-thread-db.c (thread_get_info_callback): Return early if
4741 the thread's lwp id is -1.
4743 2015-02-20 Joel Brobecker <brobecker@adacore.com>
4747 2015-02-19 Steve Ellcey <sellcey@imgtec.com>
4749 * dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr.
4750 (dtrace_get_probes) Change type of variable 'dof'.
4752 2015-02-19 Antoine Tremblay <antoine.tremblay@ericsson.com>
4754 PR breakpoints/16812
4755 * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
4756 * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
4757 * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
4759 2015-02-19 David Taylor <dtaylor@emc.com>
4761 * common/ax.def (setv): Fix consumed entry in setv DEFOP.
4763 2015-02-18 Patrick Palka <patrick@parcs.ath.cx>
4765 * tui/tui-io.c (tui_handle_resize_during_io): Remove this
4767 (tui_putc): Don't call tui_handle_resize_during_io.
4768 (tui_getc): Likewise.
4769 (tui_mld_getc): Likewise.
4770 * tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
4771 (tui_sigwinch_token): New static variable.
4772 (tui_initialize_win): Adjust documentation. Set
4774 (tui_async_resize_screen): New asynchronous callback.
4775 (tui_sigwinch_handler): Adjust documentation. Asynchronously
4776 invoke tui_async_resize_screen.
4778 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
4780 * configure: Regenerated.
4781 * configure.ac: Use GDB_AC_TRANSFORM.
4782 * Makefile.in (aclocal_m4_deps): Added transform.m4.
4783 * acinclude.m4: sinclude transform.m4.
4784 * transform.m4: New file.
4785 (GDB_AC_TRANSFORM): New macro.
4787 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4789 * NEWS: Announce the support for DTrace SDT probes.
4791 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4793 * amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
4794 (amd64_dtrace_parse_probe_argument): New function.
4795 (amd64_dtrace_probe_is_enabled): Likewise.
4796 (amd64_dtrace_enable_probe): Likewise.
4797 (amd64_dtrace_disable_probe): Likewise.
4798 (amd64_linux_init_abi): Register the
4799 `gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
4800 `gdbarch_dtrace_disable_probe' and
4801 `gdbarch_dtrace_probe_is_enabled' hooks.
4802 (amd64_dtrace_disabled_probe_sequence_1): New constant.
4803 (amd64_dtrace_disabled_probe_sequence_2): Likewise.
4804 (amd64_dtrace_enable_probe_sequence): Likewise.
4805 (amd64_dtrace_disable_probe_sequence): Likewise.
4807 2015-01-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4809 * breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
4810 the -probe-dtrace new vpossible value for PROBE_MODIFIER.
4811 * configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
4813 * Makefile.in (SFILES): dtrace-probe.c added.
4814 * configure: Regenerate.
4815 * dtrace-probe.c: New file.
4816 (SHT_SUNW_dof): New constant.
4817 (dtrace_probe_type): New enum.
4818 (dtrace_probe_arg): New struct.
4819 (dtrace_probe_arg_s): New typedef.
4820 (struct dtrace_probe_enabler): New struct.
4821 (dtrace_probe_enabler_s): New typedef.
4822 (dtrace_probe): New struct.
4823 (dtrace_probe_is_linespec): New function.
4824 (dtrace_dof_sect_type): New enum.
4825 (dtrace_dof_dofh_ident): Likewise.
4826 (dtrace_dof_encoding): Likewise.
4827 (DTRACE_DOF_ENCODE_LSB): Likewise.
4828 (DTRACE_DOF_ENCODE_MSB): Likewise.
4829 (dtrace_dof_hdr): New struct.
4830 (dtrace_dof_sect): Likewise.
4831 (dtrace_dof_provider): Likewise.
4832 (dtrace_dof_probe): Likewise.
4833 (DOF_UINT): New macro.
4834 (DTRACE_DOF_PTR): Likewise.
4835 (DTRACE_DOF_SECT): Likewise.
4836 (dtrace_process_dof_probe): New function.
4837 (dtrace_process_dof): Likewise.
4838 (dtrace_build_arg_exprs): Likewise.
4839 (dtrace_get_arg): Likewise.
4840 (dtrace_get_probes): Likewise.
4841 (dtrace_get_probe_argument_count): Likewise.
4842 (dtrace_can_evaluate_probe_arguments): Likewise.
4843 (dtrace_evaluate_probe_argument): Likewise.
4844 (dtrace_compile_to_ax): Likewise.
4845 (dtrace_probe_destroy): Likewise.
4846 (dtrace_gen_info_probes_table_header): Likewise.
4847 (dtrace_gen_info_probes_table_values): Likewise.
4848 (dtrace_probe_is_enabled): Likewise.
4849 (dtrace_probe_ops): New variable.
4850 (info_probes_dtrace_command): New function.
4851 (_initialize_dtrace_probe): Likewise.
4852 (dtrace_type_name): Likewise.
4854 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4856 * gdbarch.sh (dtrace_parse_probe_argument): New.
4857 (dtrace_probe_is_enabled): Likewise.
4858 (dtrace_enable_probe): Likewise.
4859 (dtrace_disable_probe): Likewise.
4860 * gdbarch.c: Regenerate.
4861 * gdbarch.h: Regenerate.
4863 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4865 * stap-probe.c (stap_probe_ops): Add NULLs in the static
4866 stap_probe_ops for `enable_probe' and `disable_probe'.
4867 * probe.c (enable_probes_command): New function.
4868 (disable_probes_command): Likewise.
4869 (_initialize_probe): Define the cli commands `enable probe' and
4871 (parse_probe_linespec): New function.
4872 (info_probes_for_ops): Use parse_probe_linespec.
4873 * probe.h (probe_ops): New hooks `enable_probe' and
4876 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4878 * probe.c (compute_probe_arg): Moved from stap-probe.c
4879 (compile_probe_arg): Likewise.
4880 (probe_funcs): Likewise.
4881 * stap-probe.c (compute_probe_arg): Moved to probe.c.
4882 (compile_probe_arg): Likewise.
4883 (probe_funcs): Likewise.
4885 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4887 * probe.c (print_ui_out_not_applicables): New function.
4888 (exists_probe_with_pops): Likewise.
4889 (info_probes_for_ops): Do not include column headers for probe
4890 types for which no probe has been actually found on any object.
4891 Also invoke `print_ui_out_not_applicables' in order to match the
4892 column rows with the header when probes of several types are
4894 Print the "Type" column.
4895 * probe.h (probe_ops): Added a new probe operation `type_name'.
4896 * stap-probe.c (stap_probe_ops): Add `stap_type_name'.
4897 (stap_type_name): New function.
4899 2015-02-17 Patrick Palka <patrick@parcs.ath.cx>
4901 * tui/tui-io.c (tui_getc): Don't call key_is_command_char.
4902 (key_is_command_char): Delete.
4904 2015-02-17 Pedro Alves <palves@redhat.com>
4906 * tui/tui.c (tui_enable): Resize windows before anything
4907 might show a window.
4909 2015-02-17 Max Ostapenko <m.ostapenko@partner.samsung.com>
4912 * aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
4913 (aarch64_linux_read_description): Remove initialize_tdesc_aarch64
4915 * aarch64-tdep.h (tdesc_aarch64): Declare.
4917 2015-02-12 Mark Wielaard <mjw@redhat.com>
4919 * contrib/ari/gdb_ari.sh: Remove checks for "true" and "false".
4921 2015-02-13 Doug Evans <dje@google.com>
4923 * cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
4924 anonymous_namespace to is_in_anonymous for consistency with the rest
4926 (cp_lookup_bare_symbol): Fix typo in comment.
4927 (cp_search_static_and_baseclasses): Ditto.
4928 (search_symbol_list): Use vertical space in comment better.
4929 (reset_directive_searched): Ditto. Fix typo.
4930 (cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.
4932 2015-02-13 Yao Qi <yao.qi@arm.com>
4934 * MAINTAINERS: Update my email address.
4936 2015-02-12 Doug Evans <dje@google.com>
4938 * symtab.c (completion_list_add_name): Fix memory leak.
4940 2015-02-12 Doug Evans <dje@google.com>
4942 * completer.c (complete_line): Remove incorrect comment.
4944 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4946 * python/py-framefilter.c (py_print_single_arg, enumerate_locals)
4947 (py_print_frame): Use RETURN_MASK_ERROR.
4949 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4951 * python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
4952 function comment. Wrap all function that can throw in cleanups.
4953 (gdbpy_apply_frame_filter): Wrap all function that can throw in
4956 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4958 * python/py-framefilter.c (py_print_frame): Substitute goto error.
4959 Remove the error label.
4961 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4963 * python/py-framefilter.c (py_print_frame): Put conditional code paths
4964 with goto first, indent the former else codepath left. Put variable
4965 'elided' to a new inner block.
4967 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4969 * python/py-framefilter.c (py_print_frame): Whitespacing fixes.
4971 2015-02-11 Pedro Alves <palves@redhat.com>
4973 * xcoffread.c (within_function): Delete.
4975 2015-02-11 Tom Tromey <tromey@redhat.com>
4976 Pedro Alves <palves@redhat.com>
4978 * breakpoint.c (base_breakpoint_ops): Delete.
4979 * dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
4980 * elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
4981 * guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
4982 * ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
4983 * python/py-arch.c (arch_object_type): Make extern.
4984 * python/py-block.c (block_syms_iterator_object_type): Make extern.
4985 * python/py-bpevent.c (breakpoint_event_object_type): Make extern.
4986 * python/py-cmd.c (cmdpy_object_type): Make extern.
4987 * python/py-continueevent.c (continue_event_object_type)
4988 * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
4989 parameter. Update all callers.
4990 * python/py-evtregistry.c (eventregistry_object_type): Make extern.
4991 * python/py-exitedevent.c (exited_event_object_type): Make extern.
4992 * python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
4993 * python/py-function.c (fnpy_object_type): Make extern.
4994 * python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
4995 * python/py-infevents.c (call_pre_event_object_type)
4996 (inferior_call_post_event_object_type).
4997 (memory_changed_event_object_type): Make extern.
4998 * python/py-infthread.c (thread_object_type): Make extern.
4999 * python/py-lazy-string.c (lazy_string_object_type): Make extern.
5000 * python/py-linetable.c (linetable_entry_object_type)
5001 (linetable_object_type, ltpy_iterator_object_type): Make extern.
5002 * python/py-newobjfileevent.c (new_objfile_event_object_type)
5003 (clear_objfiles_event_object_type): Make extern.
5004 * python/py-objfile.c (objfile_object_type): Make extern.
5005 * python/py-param.c (parmpy_object_type): Make extern.
5006 * python/py-progspace.c (pspace_object_type): Make extern.
5007 * python/py-signalevent.c (signal_event_object_type): Make extern.
5008 * python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
5009 * python/py-type.c (type_object_type, field_object_type)
5010 (type_iterator_object_type): Make extern.
5011 * python/python.c (python_extension_script_ops)
5012 (python_extension_ops): Make extern.
5013 * stap-probe.c (stap_probe_ops): Make extern.
5015 2015-02-11 Pedro Alves <pedro@codesourcery.com>
5017 * infrun.c (adjust_pc_after_break): Don't adjust the PC just
5018 because the event thread is not the current thread.
5020 2015-02-11 Doug Evans <xdje42@gmail.com>
5022 * gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't
5023 been initialized yet, return NULL.
5025 2015-02-11 Doug Evans <dje@google.com>
5027 * symfile.h (new_symfile_objfile): Delete.
5028 * symfile.c (finish_new_objfile): Renamed from new_symfile_objfile.
5029 All callers updated.
5031 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
5033 * tui/tui-io.c (tui_handle_resize_during_io): Call
5034 tui_update_gdb_sizes() after resizing the screen.
5035 * tui/tui.c (tui_enable): Resize the terminal before
5036 calling tui_update_gdb_sizes().
5038 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
5040 * tui/tui-io.c (tui_getc): Move cursor to the end of the command
5041 line before printing a newline.
5043 2015-02-11 Mark Wielaard <mjw@redhat.com>
5045 * utils.c (producer_is_gcc): Return true or false.
5047 2015-02-10 Mark Wielaard <mjw@redhat.com>
5049 * utils.h (producer_is_gcc): Change return type to bool. Add major
5051 * utils.c (producer_is_gcc): Likewise.
5052 (producer_is_gcc_ge_4): Adjust producer_is_gcc call.
5053 * dwarf2read.c (check_producer): Likewise.
5055 2015-02-10 Pedro Alves <palves@redhat.com>
5057 * infrun.c (displaced_step_fixup): Switch to the event thread
5058 before calling gdbarch_displaced_step_fixup.
5060 2015-02-10 Antoine Tremblay <antoine.tremblay@ericsson.com>
5062 * MAINTAINERS (Write After Approval): Add Antoine Tremblay.
5064 2015-02-10 Simon Marchi <simon.marchi@ericsson.com>
5066 * ada-varobj.c (ada_name_of_child): Constify parent.
5067 (ada_path_expr_of_child): Same.
5068 (ada_value_of_child): Same.
5069 (ada_type_of_child): Same.
5070 * c-varobj.c (c_is_path_expr_parent): Same.
5071 (c_describe_child): Same.
5072 (c_name_of_child): Same.
5073 (c_value_of_child): Same.
5074 (c_type_of_child): Same.
5075 (cplus_number_of_children): Same.
5076 (cplus_describe_child): Constify var.
5077 (cplus_name_of_child): Constify parent.
5078 (cplus_value_of_child): Same.
5079 (cplus_type_of_child): Same.
5080 * jv-varobj.c (java_name_of_child): Same.
5081 (java_value_of_child): Same.
5082 (java_type_of_child): Same.
5083 * varobj.c (value_of_child): Same.
5084 (varobj_default_is_path_expr_parent): Constify var, parent and return
5086 (varobj_get_path_expr): Constify var, modify path_expr through
5088 (install_new_value): Constify parent.
5089 (value_of_child): Constify parent.
5090 * varobj.h (struct varobj): Constify parent.
5091 (struct lang_varobj_ops): Constify name_of_child, value_of_child and
5093 (varobj_get_path_expr): Constify var.
5094 (varobj_get_path_expr_parent): Constify var and return value.
5096 2015-02-10 Luis Machado <lgustavo@codesourcery.com>
5098 * arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
5099 (arm_prologue_this_id): Move PC and SP limit checks to
5100 arm_prologue_unwind_stop_reason.
5101 (arm_prologue_unwind) <stop_reason> : Set to
5102 arm_prologue_unwind_stop_reason.
5104 2015-02-09 Mark Wielaard <mjw@redhat.com>
5106 * dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
5107 DW_LANG_Fortran08 as language_fortran.
5109 2015-02-09 Sergio Durigan Junior <sergiodj@redhat.com>
5112 * gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
5113 of pointer against char.
5115 2015-02-09 Mark Wielaard <mjw@redhat.com>
5117 * c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'.
5118 (c_type_print_modifier): Likewise.
5119 * dwarf2read.c (read_tag_atomic_type): New function.
5120 (read_type_die_1): Handle DW_TAG_atomic_type.
5121 * gdbtypes.c (make_atomic_type): New function.
5122 (recursive_dump_type): Handle TYPE_ATOMIC.
5123 * gdbtypes.h (enum type_flag_values): Renumber.
5124 (enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC.
5125 (TYPE_ATOMIC): New macro.
5126 (make_atomic_type): Declare.
5128 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5130 * btrace.c (ftrace_find_call): Skip gaps.
5131 (ftrace_new_function): Initialize level.
5132 (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
5133 (ftrace_new_switch): Update
5135 (ftrace_new_gap): New.
5136 (ftrace_update_function): Create new function after gap.
5137 (btrace_compute_ftrace_bts): Create gap on error.
5138 (btrace_stitch_bts): Update parameters. Clear trace if it
5140 (btrace_stitch_trace): Update parameters. Update callers.
5141 (btrace_clear): Reset the number of gaps.
5142 (btrace_insn_get): Return NULL if the iterator points to a gap.
5143 (btrace_insn_number): Return zero if the iterator points to a gap.
5144 (btrace_insn_end): Allow gaps at the end.
5145 (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
5146 (btrace_find_insn_by_number): Assert that the found iterator does
5148 (btrace_call_next, btrace_call_prev): Assert that the last function
5150 * btrace.h (btrace_bts_error): New.
5151 (btrace_function): Update comment.
5152 (btrace_function) <insn, insn_offset, number>: Update comment.
5153 (btrace_function) <errcode>: New.
5154 (btrace_thread_info) <ngaps>: New.
5155 (btrace_thread_info) <replay>: Update comment.
5156 (btrace_insn_get): Update comment.
5157 * record-btrace.c (btrace_ui_out_decode_error): New.
5158 (record_btrace_info): Print number of gaps.
5159 (btrace_insn_history, btrace_call_history): Call
5160 btrace_ui_out_decode_error for gaps.
5161 (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
5163 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5165 * common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
5166 * nat/linux-btrace.c: (btrace_this_cpu): New.
5167 (cpu_supports_bts): Call btrace_this_cpu.
5168 (intel_supports_bts): Add cpu parameter.
5170 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5172 * btrace.h (btrace_insn_class): New.
5173 (btrace_insn) <size, iclass>: New.
5174 * btrace.c (ftrace_find_call): Update parameters. Update users.
5175 Use instruction classification.
5176 (ftrace_new_return): Update parameters. Update users.
5177 (ftrace_update_function): Update parameters. Update users. Use
5178 instruction classification.
5179 (ftrace_update_insns): Update parameters. Update users.
5180 (ftrace_classify_insn): New.
5181 (btrace_compute_ftrace_bts): Fill in new btrace_insn fields. Add
5182 TRY_CATCH around call to gdb_insn_length.
5184 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5186 * btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
5187 Update parameters. Update users.
5189 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5191 * btrace.c (parse_xml_btrace_conf_bts): Add size.
5192 (btrace_conf_bts_attributes): New.
5193 (btrace_conf_children): Add attributes.
5194 * common/btrace-common.h (btrace_config_bts): New.
5195 (btrace_config)<bts>: New.
5196 (btrace_config): Update comment.
5197 * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
5199 * features/btrace-conf.dtd: Increment version. Add size
5200 attribute to bts element.
5201 * record-btrace.c (set_record_btrace_bts_cmdlist,
5202 show_record_btrace_bts_cmdlist): New.
5203 (record_btrace_adjust_size, record_btrace_print_bts_conf,
5204 record_btrace_print_conf, cmd_set_record_btrace_bts,
5205 cmd_show_record_btrace_bts): New.
5206 (record_btrace_info): Call record_btrace_print_conf.
5207 (_initialize_record_btrace): Add commands.
5208 * remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
5209 (remote_protocol_features): Add Qbtrace-conf:bts:size packet.
5210 (btrace_sync_conf): Synchronize bts size.
5211 (_initialize_remote): Add Qbtrace-conf:bts:size packet.
5212 * NEWS: Announce new commands and new packets.
5214 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5216 * Makefile.in (XMLFILES): Add btrace-conf.dtd.
5217 * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
5218 (x86_linux_btrace_conf): New.
5219 (x86_linux_create_target): Initialize to_btrace_conf.
5220 * nat/linux-btrace.c (linux_enable_btrace): Update parameters.
5221 Check format. Split into this and ...
5222 (linux_enable_bts): ... this.
5223 (linux_btrace_conf): New.
5224 (perf_event_skip_record): Renamed into ...
5225 (perf_event_skip_bts_record): ... this. Updated users.
5226 (linux_disable_btrace): Split into this and ...
5227 (linux_disable_bts): ... this.
5228 (linux_read_btrace): Check format.
5229 * nat/linux-btrace.h (linux_enable_btrace): Update parameters.
5230 (linux_btrace_conf): New.
5231 (btrace_target_info)<ptid>: Moved.
5232 (btrace_target_info)<conf>: New.
5233 (btrace_target_info): Split into this and ...
5234 (btrace_tinfo_bts): ... this. Updated users.
5235 * btrace.c (btrace_enable): Update parameters.
5236 (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
5237 (btrace_conf_children, btrace_conf_attributes)
5238 (btrace_conf_elements): New.
5239 * btrace.h (btrace_enable): Update parameters.
5240 (btrace_conf, parse_xml_btrace_conf): New.
5241 * common/btrace-common.h (btrace_config): New.
5242 * feature/btrace-conf.dtd: New.
5243 * record-btrace.c (record_btrace_conf): New.
5244 (record_btrace_cmdlist): New.
5245 (record_btrace_enable_warn, record_btrace_open): Pass
5246 &record_btrace_conf.
5247 (record_btrace_info): Print recording format.
5248 (cmd_record_btrace_bts_start): New.
5249 (cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
5250 (_initialize_record_btrace): Add "record btrace bts" subcommand.
5251 Add "record bts" alias command.
5252 * remote.c (remote_state)<btrace_config>: New.
5253 (remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
5254 (remote_protocol_features): Add qXfer:btrace-conf:read.
5255 (remote_open_1): Call remote_btrace_reset.
5256 (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
5257 (btrace_target_info)<conf>: New.
5258 (btrace_sync_conf, btrace_read_config): New.
5259 (remote_enable_btrace): Update parameters. Call btrace_sync_conf and
5261 (remote_btrace_conf): New.
5262 (init_remote_ops): Initialize to_btrace_conf.
5263 (_initialize_remote): Add qXfer:btrace-conf packet.
5264 * target.c (target_enable_btrace): Update parameters.
5265 (target_btrace_conf): New.
5266 * target.h (target_enable_btrace): Update parameters.
5267 (target_btrace_conf): New.
5268 (target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
5269 (target_ops)<to_enable_btrace>: Update parameters and comment.
5270 (target_ops)<to_btrace_conf>: New.
5271 * target-delegates: Regenerate.
5272 * target-debug.h (target_debug_print_const_struct_btrace_config_p)
5273 (target_debug_print_const_struct_btrace_target_info_p): New.
5274 * NEWS: Announce new command and new packet.
5276 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5278 * nat/linux-btrace.h (perf_event_buffer): New.
5279 (btrace_target_info) <buffer, size, data_head>: Replace with ...
5281 * nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
5282 (perf_event_buffer_size, perf_event_buffer_begin)
5283 (perf_event_buffer_end, linux_btrace_has_changed): Removed.
5285 (perf_event_new_data): New.
5287 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5289 * btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
5290 * record-btrace.c (record_btrace_open): Remove call to
5291 target_supports_btrace.
5292 * remote.c (remote_supports_btrace): Update parameters.
5293 * target.c (target_supports_btrace): Update parameters.
5294 * target.h (to_supports_btrace, target_supports_btrace): Update
5296 * target-delegates.c: Regenerate.
5297 * target-debug.h (target_debug_print_enum_btrace_format): New.
5298 * nat/linux-btrace.c
5299 (kernel_supports_btrace): Rename into ...
5300 (kernel_supports_bts): ... this. Update users. Update warning text.
5301 (intel_supports_btrace): Rename into ...
5302 (intel_supports_bts): ... this. Update users.
5303 (cpu_supports_btrace): Rename into ...
5304 (cpu_supports_bts): ... this. Update users.
5305 (linux_supports_btrace): Update parameters. Split into this and ...
5306 (linux_supports_bts): ... this.
5307 * nat/linux-btrace.h (linux_supports_btrace): Update parameters.
5309 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5311 * Makefile.in (SFILES): Add common/btrace-common.c.
5312 (COMMON_OBS): Add common/btrace-common.o.
5313 (btrace-common.o): Add build rules.
5314 * btrace.c (parse_xml_btrace): Update parameters.
5315 (parse_xml_btrace_block): Set format field.
5316 (btrace_add_pc, btrace_fetch): Use struct btrace_data.
5317 (do_btrace_data_cleanup, make_cleanup_btrace_data): New.
5318 (btrace_compute_ftrace): Split into this and...
5319 (btrace_compute_ftrace_bts): ...this.
5320 (btrace_stitch_trace): Split into this and...
5321 (btrace_stitch_bts): ...this.
5322 * btrace.h (parse_xml_btrace): Update parameters.
5323 (make_cleanup_btrace_data): New.
5324 * common/btrace-common.c: New.
5325 * common/btrace-common.h: Include common-defs.h.
5326 (btrace_block_s): Update comment.
5327 (btrace_format): New.
5328 (btrace_format_string): New.
5329 (btrace_data_bts): New.
5331 (btrace_data_init, btrace_data_fini, btrace_data_empty): New.
5332 * remote.c (remote_read_btrace): Update parameters.
5333 * target.c (target_read_btrace): Update parameters.
5334 * target.h (target_read_btrace): Update parameters.
5335 (target_ops)<to_read_btrace>: Update parameters.
5336 * x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
5337 * target-delegates.c: Regenerate.
5338 * target-debug (target_debug_print_struct_btrace_data_p): New.
5339 * nat/linux-btrace.c (linux_read_btrace): Split into this and...
5340 (linux_read_bts): ...this.
5341 * nat/linux-btrace.h (linux_read_btrace): Update parameters.
5343 2015-02-06 Doug Evans <dje@google.com>
5345 * remote-m32r-sdi.c: Include symfile.h.
5347 2015-02-06 Doug Evans <dje@google.com>
5349 * symtab.h (clear_symtab_users, deduce_language_from_filename): Move
5350 * symfile.h (clear_symtab_users, deduce_language_from_filename): ...
5353 2015-02-06 Pedro Alves <palves@redhat.com>
5355 * linux-thread-db.c (find_new_threads_callback): Add debug output.
5357 2015-02-06 Simon Marchi <simon.marchi@ericsson.com>
5360 * breakpoint.c (map_breakpoint_numbers): Check for empty args string.
5361 (enable_count_command): Check args for NULL value.
5363 2015-02-05 Doug Evans <xdje42@gmail.com>
5365 * guile/scm-frame.c: Fix spelling errors in a comment.
5367 2015-02-04 Jan Kratochvil <jan.kratochvil@redhat.com>
5369 * python/python-internal.h (Py_hash_t): Define it for Python <3.2.
5370 * python/py-value.c (valpy_fetch_lazy): Use it. Remove cast to the
5373 2015-02-04 Pedro Alves <palves@redhat.com>
5375 * linux-nat.c (handle_extended_wait): Don't resume LWPs here.
5376 (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
5378 (resume_stopped_resumed_lwps): Don't check whether the thread is
5379 marked as executing.
5380 (linux_nat_wait_1): Use resume_stopped_resumed_lwps.
5382 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
5384 * regset.h (struct regset): Add flags field.
5385 (REGSET_VARIABLE_SIZE): New value for a regset's flags field.
5386 * corelow.c (get_core_register_section): Add warning if the size
5387 exceeds the requested size and the regset does not have the
5388 REGSET_VARIABLE_SIZE flag set.
5389 * alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
5391 * armbsd-tdep.c (armbsd_gregset): Likewise.
5392 * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
5393 * hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
5394 * m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
5395 * mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.
5397 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
5399 * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
5400 For ".reg-xstate", explicitly specify the requested section size
5401 via X86_XSTATE_SIZE instead of just 0 on input and
5402 X86_XSTATE_MAX_SIZE on output.
5403 * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
5406 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
5409 * gdbarch.sh (iterate_over_regset_sections_cb): Document this
5410 function type, particularly its SIZE parameter.
5411 * gdbarch.h: Regenerate.
5412 * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
5413 actual against required size using ">=" instead of "==".
5414 (amd64_collect_fpregset): Likewise.
5415 * i386-tdep.c (i386_supply_gregset): Likewise.
5416 (i386_collect_gregset): Likewise.
5417 (i386_supply_fpregset): Likewise.
5418 (i386_collect_fpregset): Likewise.
5419 * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
5420 (mips_fill_gregset_wrapper): Likewise.
5421 (mips_supply_fpregset_wrapper): Likewise.
5422 (mips_fill_fpregset_wrapper): Likewise.
5423 (mips64_supply_gregset_wrapper): Likewise.
5424 (mips64_fill_gregset_wrapper): Likewise.
5425 (mips64_supply_fpregset_wrapper): Likewise.
5426 (mips64_fill_fpregset_wrapper): Likewise.
5427 * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
5428 (am33_supply_fpregset_method): Likewise.
5429 (am33_collect_gregset_method): Likewise.
5430 (am33_collect_fpregset_method): Likewise.
5432 2015-02-04 Doug Evans <dje@google.com>
5433 Pedro Alves <palves@redhat.com>
5434 Eli Zaretskii <eliz@gnu.org>
5437 * tui/tui-command.c (tui_refresh_cmd_win): New function.
5438 * tui/tui-command.c (tui_refresh_cmd_win): Declare.
5439 * tui/tui-file.c: #include tui/tui-command.h.
5440 (tui_file_fputs): Refresh command window if stream is not gdb_stdout.
5441 (tui_file_flush): Refresh command window if stream is gdb_stdout.
5442 * tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.
5444 2015-02-04 Pedro Alves <palves@redhat.com>
5447 * event-loop.c (gdb_do_one_event): Add default switch case.
5449 2015-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
5451 Filter out inferior gcc option -fpreprocessed.
5452 * compile/compile.c (filter_args): New function.
5455 2015-02-03 Pedro Alves <palves@redhat.com>
5457 * event-loop.c: Don't declare nor define a queue type for
5459 (event_queue): Delete.
5460 (create_event, create_file_event, gdb_event_xfree)
5461 (initialize_event_loop, process_event): Delete.
5462 (gdb_do_one_event): Return as soon as one event is handled.
5463 (handle_file_event): Change prototype. Used the passed in
5464 file_handler pointer and ready_mask instead of looping over all
5466 (gdb_wait_for_event): Update the poll/select timeouts before
5467 blocking. Run event handlers directly instead of queueing events.
5468 Return as soon as one event is handled.
5469 (struct async_event_handler_data): Delete.
5470 (invoke_async_event_handler): Delete.
5471 (check_async_event_handlers): Change return type to int. Run
5472 event handlers directly instead of queueing events. Return as
5473 soon as one event is handled.
5474 (handle_timer_event): Delete.
5475 (update_wait_timeout): New function, factored out from
5477 (poll_timers): Reimplement.
5478 * event-loop.h (initialize_event_loop): Delete declaration.
5479 * top.c (gdb_init): Don't call initialize_event_loop.
5481 2015-02-03 Pedro Alves <palves@redhat.com>
5483 * event-loop.c (clear_async_event_handler): New function.
5484 * event-loop.h (clear_async_event_handler): New declaration.
5485 * record-btrace.c (record_btrace_async): New function.
5486 (init_record_btrace_ops): Install record_btrace_async.
5487 * record-full.c (record_full_async): New function.
5488 (record_full_resume): Don't mark the async event source here.
5489 (init_record_full_ops): Install record_full_async.
5490 (record_full_core_resume): Don't mark the async event source here.
5491 (init_record_full_core_ops): Install record_full_async.
5492 * remote.c (remote_async): Mark and clear the async stop reply
5493 queue event-loop token as appropriate.
5495 2015-02-03 Pedro Alves <palves@redhat.com>
5497 * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
5498 target_is_async_p instead of target_can_async.
5499 (linux_nat_wait): Use target_is_async_p instead of
5500 target_can_async. Don't enable async here.
5501 * remote.c (interrupt_query, remote_wait, putpkt_binary): Use
5502 target_is_async_p instead of target_can_async.
5504 2015-02-02 Simon Marchi <simon.marchi@ericsson.com>
5506 * varobj.h (lang_varobj_ops): Mention which return values need
5509 2015-02-02 Joel Brobecker <brobecker@adacore.com>
5511 * dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker.
5513 2015-02-02 Joel Brobecker <brobecker@adacore.com>
5516 * ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
5517 results found in the cache.
5519 2015-02-02 Joel Brobecker <brobecker@adacore.com>
5522 * ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
5523 when allocating a new one.
5525 2015-02-01 Tom Tromey <tom@tromey.com>
5527 * MAINTAINERS: Remove myself.
5529 2015-01-31 Doug Evans <xdje42@gmail.com>
5531 * dwarf2read.c (process_structure_scope): Update setting of
5532 TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
5533 * gdbtypes.c (internal_type_vptr_fieldno): New function.
5534 (set_type_vptr_fieldno): New function.
5535 (internal_type_vptr_basetype): New function.
5536 (set_type_vptr_basetype): New function.
5537 (get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
5539 (allocate_cplus_struct_type): Initialize vptr_fieldno.
5540 (recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
5541 (print_cplus_stuff): ... moved here.
5542 (copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
5543 * gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
5545 (struct cplus_struct_type): ... here. All uses updated.
5546 (TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
5547 (internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
5548 (internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
5549 * stabsread.c (read_tilde_fields): Update setting of
5550 TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
5552 2015-01-31 Doug Evans <xdje42@gmail.com>
5554 * cp-valprint.c (cp_find_class_member): Rename parameter domain_p
5556 (cp_print_class_member): Rename local domain to self_type.
5557 * dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
5558 domain_type to self_type.
5559 (set_die_type) <need_gnat_info>: Handle
5560 TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
5561 * gdb-gdb.py (StructMainTypePrettyPrinter): Handle
5562 TYPE_SPECIFIC_SELF_TYPE.
5563 * gdbtypes.c (internal_type_self_type): New function.
5564 (set_type_self_type): New function.
5565 (smash_to_memberptr_type): Rename parameter domain to self_type.
5566 Update setting of TYPE_SELF_TYPE.
5567 (smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
5568 (smash_to_method_type): Rename parameter domain to self_type.
5569 Update setting of TYPE_SELF_TYPE.
5570 (check_stub_method): Call smash_to_method_type.
5571 (recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
5572 (copy_type_recursive): Ditto.
5573 * gdbtypes.h (enum type_specific_kind): New value
5574 TYPE_SPECIFIC_SELF_TYPE.
5575 (struct main_type) <type_specific>: New member self_type.
5576 (struct cplus_struct_type) <fn_field.type>: Update comment.
5577 (TYPE_SELF_TYPE): Rewrite.
5578 (internal_type_self_type, set_type_self_type): Declare.
5579 * gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
5581 (gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
5582 * m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
5584 * stabsread.c (read_member_functions): Mark methods with
5585 TYPE_CODE_METHOD, not TYPE_CODE_FUNC. Update setting of
5588 2015-01-31 Doug Evans <xdje42@gmail.com>
5590 * gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE.
5593 2015-01-31 Doug Evans <xdje42@gmail.com>
5595 * gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
5596 or unions. Return zero if union.
5597 (gnuv3_get_vtable): Call check_typedef. Assert only passed structs.
5598 (gnuv3_rtti_type): Pass already-check_typedef'd value to
5600 (compute_vtable_size): Assert only passed structs.
5601 (gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.
5603 2015-01-31 Doug Evans <xdje42@gmail.com>
5605 * gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD
5608 2015-01-31 Gary Benson <gbenson@redhat.com>
5609 Doug Evans <dje@google.com>
5614 * cli/cli-cmds.c (complete_command): Notify user if max-completions
5616 * common/common-exceptions.h (enum errors)
5617 <MAX_COMPLETIONS_REACHED_ERROR>: New value.
5618 * completer.h (get_max_completions_reached_message): New declaration.
5619 (max_completions): Likewise.
5620 (completion_tracker_t): New typedef.
5621 (new_completion_tracker): New declaration.
5622 (make_cleanup_free_completion_tracker): Likewise.
5623 (maybe_add_completion_enum): New enum.
5624 (maybe_add_completion): New declaration.
5625 (throw_max_completions_reached_error): Likewise.
5626 * completer.c (max_completions): New global variable.
5627 (new_completion_tracker): New function.
5628 (free_completion_tracker): Likewise.
5629 (make_cleanup_free_completion_tracker): Likewise.
5630 (maybe_add_completions): Likewise.
5631 (throw_max_completions_reached_error): Likewise.
5632 (complete_line): Remove duplicates and limit result to max_completions
5634 (get_max_completions_reached_message): New function.
5635 (gdb_display_match_list): Handle max_completions.
5636 (_initialize_completer): New declaration and function.
5637 * symtab.c: Include completer.h.
5638 (completion_tracker): New static variable.
5639 (completion_list_add_name): Call maybe_add_completion.
5640 (default_make_symbol_completion_list_break_on_1): Renamed from
5641 default_make_symbol_completion_list_break_on. Maintain
5642 completion_tracker across calls to completion_list_add_name.
5643 (default_make_symbol_completion_list_break_on): New function.
5644 * top.c (init_main): Set rl_completion_display_matches_hook.
5645 * tui/tui-io.c: Include completer.h.
5646 (tui_old_rl_display_matches_hook): New static global.
5647 (tui_rl_display_match_list): Notify user if max-completions reached.
5648 (tui_setup_io): Save/restore rl_completion_display_matches_hook.
5649 * NEWS (New Options): Mention set/show max-completions.
5651 2015-01-31 Gary Benson <gbenson@redhat.com>
5653 * symtab.c (struct add_name_data) <code>: New field.
5655 (add_symtab_completions): New function.
5656 (symtab_expansion_callback): Likewise.
5657 (default_make_symbol_completion_list_break_on): Set datum.code.
5658 Move minimal symbol scan before calling expand_symtabs_matching.
5659 Scan known primary symtabs for externs and statics before calling
5660 expand_symtabs_matching. Pass symtab_expansion_callback as
5661 expansion_notify argument to expand_symtabs_matching. Do not scan
5662 primary symtabs for externs and statics after calling
5663 expand_symtabs_matching.
5665 2015-01-31 Gary Benson <gbenson@redhat.com>
5667 * symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
5668 (struct quick_symbol_functions) <expand_symtabs_matching>:
5669 New argument expansion_notify. All uses updated.
5670 (expand_symtabs_matching): New argument expansion_notify.
5672 * symfile-debug.c (debug_qf_expand_symtabs_matching):
5673 Also print expansion notify.
5674 * symtab.c (expand_symtabs_matching_via_partial): Call
5675 expansion_notify whenever a partial symbol table is expanded.
5676 * dwarf2read.c (dw2_expand_symtabs_matching): Call
5677 expansion_notify whenever a symbol table is instantiated.
5679 2015-01-31 Doug Evans <xdje42@gmail.com>
5681 * cli-out.c: #include completer.h, readline/readline.h.
5682 (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
5683 (cli_mld_flush, cld_mld_erase_entire_line): Ditto.
5684 (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
5685 * cli-out.h (cli_display_match_list): Declare.
5686 * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
5687 (ELLIPSIS_LEN): Ditto.
5688 (gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
5689 (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
5690 (gdb_fnprint, gdb_print_filename): Ditto.
5691 (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
5692 (gdb_display_match_list): Ditto.
5693 * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
5694 (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
5695 (mld_beep_ftype, mld_read_key_ftype): Ditto.
5696 (match_list_displayer): New struct.
5697 (gdb_display_match_list): Declare.
5698 * top.c (init_main): Set rl_completion_display_matches_hook.
5699 * tui/tui-io.c: #include completer.h.
5700 (printable_part, PUTX, print_filename, get_y_or_n): Delete.
5701 (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
5702 (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
5703 (tui_mld_getc, tui_mld_read_key): Ditto.
5704 (tui_rl_display_match_list): Rewrite.
5705 (tui_handle_resize_during_io): New arg for_completion. All callers
5708 2015-01-31 Doug Evans <xdje42@gmail.com>
5710 Add symbol lookup cache.
5711 * NEWS: Document new options and commands.
5712 * symtab.c (symbol_cache_key): New static global.
5713 (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
5714 (SYMBOL_LOOKUP_FAILED): New macro.
5715 (symbol_cache_slot_state): New enum.
5716 (block_symbol_cache): New struct.
5717 (symbol_cache): New struct.
5718 (new_symbol_cache_size, symbol_cache_size): New static globals.
5719 (hash_symbol_entry, eq_symbol_entry): New functions.
5720 (symbol_cache_byte_size, resize_symbol_cache): New functions.
5721 (make_symbol_cache, free_symbol_cache): New functions.
5722 (get_symbol_cache, symbol_cache_cleanup): New function.
5723 (set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
5724 (symbol_cache_lookup, symbol_cache_clear_slot): New function.
5725 (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
5726 (symbol_cache_flush, symbol_cache_dump): New functions.
5727 (maintenance_print_symbol_cache): New function.
5728 (maintenance_flush_symbol_cache): New function.
5729 (symbol_cache_stats): New function.
5730 (maintenance_print_symbol_cache_statistics): New function.
5731 (symtab_new_objfile_observer): New function.
5732 (symtab_free_objfile_observer): New function.
5733 (lookup_static_symbol, lookup_global_symbol): Use symbol cache.
5734 (_initialize_symtab): Init symbol_cache_key. New parameter
5735 maint symbol-cache-size. New maint commands print symbol-cache,
5736 print symbol-cache-statistics, flush-symbol-cache.
5737 Install new_objfile, free_objfile observers.
5739 2015-01-31 Joel Brobecker <brobecker@adacore.com>
5742 * symfile.c (clear_symtab_users): Move call to breakpoint_re_set
5745 2015-01-31 Doug Evans <xdje42@gmail.com>
5747 * NEWS: Mention inlined scripts in .debug_gdb_scripts section.
5748 * auto-load.c: #include ctype.h.
5749 (struct auto_load_pspace_info): Replace member loaded_scripts with
5750 new members loaded_script_files, loaded_script_texts.
5751 (auto_load_pspace_data_cleanup): Update.
5752 (init_loaded_scripts_info): Update.
5753 (get_auto_load_pspace_data_for_loading): Update.
5754 (maybe_add_script_file): Renamed from maybe_add_script. All callers
5756 (maybe_add_script_text): New function.
5757 (clear_section_scripts): Update.
5758 (source_script_file, execute_script_contents): New functions.
5759 (source_section_scripts): Add support for
5760 SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT.
5761 (print_scripts): New function.
5762 (auto_load_info_scripts): Also print inlined scripts.
5763 (maybe_print_unsupported_script_warning): Renamed from
5764 unsupported_script_warning_print. All callers updated.
5765 (maybe_print_script_not_found_warning): Renamed from
5766 script_not_found_warning_print. All callers updated.
5767 * extension-priv.h (struct extension_language_script_ops): New member
5768 objfile_script_executor.
5769 * extension.c (ext_lang_objfile_script_executor): New function.
5770 * extension.h (objfile_script_executor_func): New typedef.
5771 (ext_lang_objfile_script_executor): Declare.
5772 * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare.
5773 * guile/guile.c (guile_extension_script_ops): Update.
5774 * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function.
5775 * python/python.c (python_extension_script_ops): Update.
5776 (gdbpy_execute_objfile_script): New function.
5778 2015-01-31 Eli Zaretskii <eliz@gnu.org>
5780 * tui/tui-io.c (tui_expand_tabs): New function.
5781 (tui_puts, tui_redisplay_readline): Expand TABs into the
5782 appropriate number of spaces.
5783 * tui/tui-regs.c: Include tui-io.h.
5784 (tui_register_format): Call tui_expand_tabs to expand TABs into
5785 the appropriate number of spaces.
5786 * tui/tui-io.h: Add prototype for tui_expand_tabs.
5788 2015-01-30 Doug Evans <dje@google.com>
5790 * NEWS: "info source" command now display producer string if present.
5791 * source.c (source_info): Print producer string if present.
5793 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5795 * varobj.c (varobj_delete): Fix comment.
5797 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5799 * varobj.c (create_child): Modify comment.
5801 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5803 * ada-varobj.c (ada_number_of_children): Constify struct varobj *
5805 (ada_name_of_variable): Same.
5806 (ada_path_expr_of_child): Same.
5807 (ada_value_of_variable): Same.
5808 (ada_value_is_changeable_p): Same.
5809 (ada_value_has_mutated): Same.
5810 * c-varobj.c (varobj_is_anonymous_child): Same.
5811 (c_is_path_expr_parent): Same.
5812 (c_number_of_children): Same.
5813 (c_name_of_variable): Same.
5814 (c_path_expr_of_child): Same.
5816 (c_value_of_variable): Same.
5817 (cplus_number_of_children): Same.
5818 (cplus_name_of_variable): Same.
5819 (cplus_path_expr_of_child): Same.
5820 (cplus_value_of_variable): Same.
5821 * jv-varobj.c (java_number_of_children): Same.
5822 (java_name_of_variable): Same.
5823 (java_path_expr_of_child): Same.
5824 (java_value_of_variable): Same.
5825 * varobj.c (number_of_children): Same.
5826 (name_of_variable): Same.
5828 (varobj_ensure_python_env): Same.
5829 (varobj_get_objname): Same.
5830 (varobj_get_expression): Same.
5831 (varobj_get_display_format): Same.
5832 (varobj_get_display_hint): Same.
5833 (varobj_has_more): Same.
5834 (varobj_get_thread_id): Same.
5835 (varobj_get_frozen): Same.
5836 (dynamic_varobj_has_child_method): Same.
5837 (varobj_get_gdb_type): Same.
5838 (is_path_expr_parent): Same.
5839 (varobj_default_is_path_expr_parent): Same.
5840 (varobj_get_language): Same.
5841 (varobj_get_attributes): Same.
5842 (varobj_is_dynamic_p): Same.
5843 (varobj_get_child_range): Same.
5844 (varobj_value_has_mutated): Same.
5845 (varobj_get_value_type): Same.
5846 (number_of_children): Same.
5847 (name_of_variable): Same.
5848 (check_scope): Same.
5849 (varobj_editable_p): Same.
5850 (varobj_value_is_changeable_p): Same.
5851 (varobj_floating_p): Same.
5852 (varobj_default_value_is_changeable_p): Same.
5854 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5856 * varobj.c (varobj_get_path_expr): Set var->path_expr.
5857 * c-varobj.c (c_path_expr_of_child): Set local var instead of
5859 (cplus_path_expr_of_child): Same.
5861 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5863 * mi-cmd-var.c (print_varobj): Free varobj_get_expression
5865 (mi_cmd_var_info_expression): Same.
5866 * varobj.c (varobj_get_expression): Mention in the comment that
5867 the result must by freed by the caller.
5869 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5871 * mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
5873 (varobj_update_one): Same.
5874 * varobj.c (update_type_if_necessary): Free curr_type_str and
5876 (varobj_get_type): Specify in comment that the result needs to be
5877 freed by the caller.
5879 2015-01-29 Doug Evans <dje@google.com>
5882 * dwarf2read.c (dwarf_decode_line_header): Punt if version > 4.
5884 2015-01-25 Mark Wielaard <mjw@redhat.com>
5886 * dwarf2read.c (checkproducer): Call producer_is_gcc.
5887 * utils.c (producer_is_gcc_ge_4): Likewise.
5888 (producer_is_gcc): New function.
5889 * utils.h (producer_is_gcc): New declaration.
5891 2015-01-29 Joel Brobecker <brobecker@adacore.com>
5893 * gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
5895 * gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
5896 parameter by "addr_stack" parameter.
5897 (resolve_dynamic_range): Replace "addr" parameter by
5898 "stack_addr" parameter. Update function documentation.
5899 Update code accordingly.
5900 (resolve_dynamic_array, resolve_dynamic_union)
5901 (resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
5902 (resolve_dynamic_type): Update code, following the changes made
5903 to resolve_dynamic_type_internal's interface.
5904 * dwarf2loc.h (struct property_addr_info): New.
5905 (dwarf2_evaluate_property): Replace "address" parameter
5906 by "addr_stack" parameter. Adjust function documentation.
5907 (struct dwarf2_offset_baton): New.
5908 (struct dwarf2_property_baton): Update documentation of
5909 field "referenced_type" to be more general. New field
5910 "offset_info" in union data field.
5911 * dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
5912 parameter by "addr_stack" parameter. Adjust code accordingly.
5913 Add support for PROP_ADDR_OFFSET properties.
5914 * dwarf2read.c (attr_to_dynamic_prop): Add support for
5915 DW_AT_data_member_location attributes as well. Use case
5916 statements instead of if/else condition.
5918 2015-01-29 Joel Brobecker <brobecker@adacore.com>
5920 * ada-varobj.c (ada_varobj_get_array_number_of_children):
5921 Return zero if PARENT_VALUE is NULL and parent_type's
5922 range type is dynamic.
5924 2015-01-29 Joel Brobecker <brobecker@adacore.com>
5926 * gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
5927 nonzero if the type's subtype is dynamic.
5928 (resolve_dynamic_range): Also resolve the range's subtype.
5930 2015-01-29 Alexander Klimov <alserkli@inbox.ru> (tiny patch)
5932 Pushed by Joel Brobecker <brobecker@adacore.com>.
5933 * symfile.c (unmap_overlay_command): Initialize sec to NULL.
5935 2015-01-27 Doug Evans <dje@google.com>
5937 * NEWS: Mention gdb.Objfile.username.
5938 * python/py-objfile.c (objfpy_get_username): New function.
5939 (objfile_getset): Add "username".
5941 2015-01-24 Mark Wielaard <mjw@redhat.com>
5943 * stack.c (return_command): Markup warning message with _.
5945 2015-01-24 Doug Evans <xdje42@gmail.com>
5947 * gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete.
5949 2015-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
5951 Fix 100x slowdown regression on DWZ files.
5952 * dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
5953 (struct line_header): Add offset and offset_in_dwz.
5954 (dwarf_decode_lines): Add parameter decode_mapping to the declaration.
5955 (free_line_header_voidp): New declaration.
5956 (line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
5958 (dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
5959 (handle_DW_AT_stmt_list): Use line_header_hash.
5960 (free_line_header_voidp): New function.
5961 (dwarf_decode_line_header): Initialize offset and offset_in_dwz.
5962 (dwarf_decode_lines): New parameter decode_mapping, use it.
5963 (dwarf2_free_objfile): Free line_header_hash.
5965 2015-01-23 Simon Marchi <simon.marchi@ericsson.com>
5968 * valops.c (value_rtti_indirect_type): Catch exception thrown by
5971 2015-01-15 Mark Wielaard <mjw@redhat.com>
5973 * dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
5975 * gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
5976 calling_convention an 8 bit bit field.
5977 (TYPE_NO_RETURN): New macro.
5978 * infcmd.c (finish_command): Query if function does not return
5980 * stack.c (return_command): Likewise.
5982 2015-01-23 Pedro Alves <palves@redhat.com>
5984 * linux-nat.c (linux_is_async_p): New macro.
5985 (linux_nat_is_async_p):
5986 (linux_nat_terminal_inferior): Check whether the target can async
5987 instead of whether it is already async.
5988 (linux_nat_terminal_ours): Don't check whether the target is
5990 (linux_async_pipe): Use linux_is_async_p.
5992 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
5994 * NEWS (Changes since GDB 7.9): Add 'thread apply all' option
5996 * thread.c (tp_array_compar_ascending, tp_array_compar): New.
5997 (thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
5998 Sort tp_array using tp_array_compar.
5999 (_initialize_thread): Extend thread_apply_all_command help.
6001 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
6003 * corelow.c (core_open): Call also thread_command.
6004 * gdbthread.h (thread_command): New prototype moved from ...
6005 * thread.c (thread_command): ... here.
6006 (thread_command): Make it global.
6008 2015-01-22 Pedro Alves <palves@redhat.com>
6010 * configure.ac [*mingw32*]: Check $curses_found instead of
6012 * configure: Regenerate.
6013 * windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
6014 HAVE_NCURSES_NCURSES_H checks.
6016 2015-01-22 Eli Zaretskii <eliz@gnu.org>
6018 * tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
6019 fails with the 1st arg NULL, try again with "unknown". Don't test
6020 the "cup" capability: it isn't supported by the Windows port of
6021 ncurses, but the Windows console driver is still capable of
6024 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
6026 * compile/compile.c (_initialize_compile): Use -fPIE for compile_args.
6028 2015-01-22 Eli Zaretskii <eliz@gnu.org>
6030 * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
6031 (ALLDEPFILES): Remove irix5-nat.c. These two are part of the
6032 reason that "make TAGS" is broken.
6034 2015-01-22 Chen Gang <gang.chen.5i5j@gmail.com>
6036 * hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
6037 and check additional store instructions.
6039 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
6041 * MAINTAINERS (Write After Approval): Add "Wei-cheng Wang".
6043 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
6045 * ppc-linux-tdep.c (ppc_skip_trampoline_code,
6046 ppc_canonicalize_syscall, ppc_linux_syscall_record,
6047 ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments.
6048 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
6049 * rs6000-tdep.c (rs6000_epilogue_frame_cache,
6050 rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register,
6051 rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4,
6052 ppc_process_record_op19, ppc_process_record_op31,
6053 ppc_process_record_op59, ppc_process_record_op60,
6054 ppc_process_record_op63): Likewise.
6056 2015-01-20 Joel Brobecker <brobecker@adacore.com>
6058 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string)
6059 (linux_ptrace_test_ret_to_nx): Use safe_strerror instead of
6062 2015-01-20 Wei-cheng Wang <cole945@gmail.com>
6064 * rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19,
6065 ppc_process_record_op31, ppc_process_record_op59,
6066 ppc_process_record_op60, ppc_process_record_op63,
6067 ppc_process_record): Fix -Wformat warning.
6068 * rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60):
6069 Remove unused variables.
6071 2015-01-20 Chen Gang <gang.chen.5i5j@gmail.com>
6073 * MAINTAINERS (Write After Approval): Add "Chen Gang".
6075 2015-01-19 Eli Zaretskii <eliz@gnu.org>
6077 * configure.ac [*mingw32*]: Only add windows-termcap.o to
6078 CONFIG_OBS if not building with a curses library.
6079 * configure: Regenerate.
6081 * windows-termcap.c: Include defs.h. Make the whole body empty if
6082 either one of HAVE_CURSES_H or HAVE_NCURSES_H or
6083 HAVE_NCURSES_NCURSES_H is defined.
6085 2015-01-19 Joel Brobecker <brobecker@adacore.com>
6087 * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
6088 from end of line to start of next line.
6090 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
6092 * ppc-linux-tdep.c (ppc_skip_trampoline_code):
6093 Scan PLT stub backward for reverse debugging.
6094 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
6096 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
6097 Ulrich Weigand <uweigand@de.ibm.com>
6099 * configure.tgt (powerpc*-*-linux): Add linux-record.o to
6101 (ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall
6103 (ppc_canonicalize_syscall, ppc_linux_syscall_record,
6104 ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions.
6105 (ppc_linux_init_abi): Set process_record, process_record_signal.
6106 * ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and
6107 ppc_linux_record_tdep to gdbarch_tdep.
6108 (ppc_process_record): New declaration.
6109 * rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4,
6110 ppc_process_record_op19, ppc_process_record_op31,
6111 ppc_process_record_op59, ppc_process_record_op60,
6112 ppc_process_record_op63, ppc_process_record): New functions.
6114 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
6116 * rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to
6117 rs6000_in_function_epilogue_frame_p and add an argument
6119 (rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id,
6120 rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer):
6122 (rs6000_epilogue_frame_unwind): New.
6123 (rs6000_gdbarch_init): Append epilogue unwinder.
6125 2015-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
6127 * nat/linux-personality.c: Replace "#ifndef
6128 HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
6129 !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
6132 2015-01-16 Eli Zaretskii <eliz@gnu.org>
6134 * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
6136 (_initialize_tui_win) <border-kind, border-mode>:
6137 <active-border-mode>: Use tui_set_var_cmd as the "set" function.
6138 (tui_set_tab_width_command): Fix the commentary.
6140 * tui/tui-win.h: Add prototype for tui_rehighlight_all.
6142 * tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
6144 (tui_set_tab_width_command): Delete and recreate the source and
6145 the disassembly windows, to show the effect of the changed tab
6148 * tui/tui-data.h (LINE_PREFIX): Make shorter
6149 (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
6150 "Thread NNNNN.XXXX" thread ID notation on Windows.
6152 2015-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
6154 Fix gcc-5 compilation.
6155 * hppa-tdep.c (inst_saves_gr): Fix parentheses typo.
6157 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
6159 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
6160 (linux-personality.o): New rule.
6161 * common/common-defs.h: Include <stdint.h>.
6162 * config/aarch64/linux.mh (NATDEPFILES): Include
6163 linux-personality.o.
6164 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
6165 * config/arm/linux.mh (NATDEPFILES): Likewise.
6166 * config/i386/linux64.mh (NATDEPFILES): Likewise.
6167 * config/i386/linux.mh (NATDEPFILES): Likewise.
6168 * config/ia64/linux.mh (NATDEPFILES): Likewise.
6169 * config/m32r/linux.mh (NATDEPFILES): Likewise.
6170 * config/m68k/linux.mh (NATDEPFILES): Likewise.
6171 * config/mips/linux.mh (NATDEPFILES): Likewise.
6172 * config/pa/linux.mh (NATDEPFILES): Likewise.
6173 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
6174 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
6175 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
6176 * config/s390/linux.mh (NATDEPFILES): Likewise.
6177 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
6178 * config/sparc/linux.mh (NATDEPFILES): Likewise.
6179 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
6180 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
6181 * defs.h: Remove #include <stdint.h> (moved to
6182 common/common-defs.h).
6183 * linux-nat.c: Include nat/linux-personality.h. Remove #include
6184 <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
6185 nat/linux-personality.c).
6186 (linux_nat_create_inferior): Remove code to disable address space
6187 randomization (moved to nat/linux-personality.c). Create cleanup
6188 to disable address space randomization.
6189 * nat/linux-personality.c: New file.
6190 * nat/linux-personality.h: Likewise.
6192 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
6194 * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
6195 common/posix-strerror.c.
6196 (posix-strerror.o): New rule.
6197 (mingw-strerror.o): Likewise.
6198 * common/common-utils.h (safe_strerror): Move prototype to here,
6200 * common/common.host: New file.
6201 * common/mingw-strerror.c: Likewise.
6202 * common/posix-strerror.c: Likewise.
6203 * configure: Regenerated.
6204 * configure.ac: Source common/common.host. Add variable
6205 common_host_obs to gdb_host_obs.
6206 * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
6207 gdb/common/posix-strerror.c when warning about the use of
6209 * mingw-hdep.c (safe_strerror): Remove definition; move it to
6210 common/mingw-strerror.c.
6211 * posix-hdep.c (safe_strerror): Remove definition; move it to
6212 common/posix-hdep.c.
6213 * utils.h (safe_strerror): Remove prototype; move to
6214 common/common-utils.h.
6216 2015-01-15 Joel Brobecker <brobecker@adacore.com>
6220 2015-01-15 Joel Brobecker <brobecker@adacore.com>
6222 * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
6223 ___XA type if the array has already been fixed.
6225 2015-01-14 Yao Qi <yao@codesourcery.com>
6227 * Makefile.in (ppc-linux.o): New rule.
6228 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
6229 * configure.ac: AC_CHECK_FUNCS(getauxval).
6230 * config.in: Re-generated.
6231 * configure: Re-generated.
6232 * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
6234 * nat/ppc-linux.c: New file.
6235 * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
6236 Call ppc64_64bit_inferior_p.
6238 2015-01-14 Yao Qi <yao@codesourcery.com>
6240 * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
6242 (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
6243 (PPC_FEATURE_HAS_DFP): Likewise.
6244 (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
6245 (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
6246 (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
6247 Include "nat/ppc-linux.h".
6248 * nat/ppc-linux.h: New file.
6249 * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
6251 2015-01-14 Pedro Alves <palves@redhat.com>
6254 * breakpoint.c: Include "interps.h".
6255 (bpstat_do_actions_1): Also check whether the interpreter is
6258 2015-01-14 Pedro Alves <palves@redhat.com>
6261 * infrun.c (reinstall_readline_callback_handler_cleanup): Don't
6262 reinstall if the interpreter is sync.
6264 2015-01-13 Doug Evans <dje@google.com>
6266 * objfiles.c (objfile_filename): New function.
6267 * objfiles.h (objfile_filename): Declare it.
6268 (objfile_name): Add function comment.
6269 * python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
6270 bfd file name (which may be realpath'd), and the original name.
6272 2015-01-13 Joel Brobecker <brobecker@adacore.com>
6274 * NEWS: Create a new section for the next release branch.
6275 Rename the section of the current branch, now that it has
6278 2015-01-13 Joel Brobecker <brobecker@adacore.com>
6280 GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
6281 * version.in: Bump version to 7.9.50.DATE-cvs.
6283 2015-01-13 Joel Brobecker <brobecker@adacore.com>
6285 * nat/linux-procfs.c (linux_proc_attach_tgid_threads):
6286 Remove trailing new-line in argument of call to warning.
6288 2015-01-13 Joel Brobecker <brobecker@adacore.com>
6290 * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
6291 new-line in argument of call to "warning".
6293 2015-01-13 Joel Brobecker <brobecker@adacore.com>
6295 * ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
6296 in static block, then try searching for primitive types.
6298 2015-01-12 Patrick Palka <patrick@parcs.ath.cx>
6300 * top.h (gdb_add_history): Declare.
6301 * top.c (command_count): New variable.
6302 (gdb_add_history): New function.
6303 (gdb_safe_append_history): New static function.
6304 (quit_force): Call it.
6305 (command_line_input): Use gdb_add_history instead of
6307 * event-top.c (command_line_handler): Likewise.
6309 2015-01-12 James Clarke <jrtc27@jrtc27.com> (tiny patch)
6312 * darwin-nat.c: Replace <machine/setjmp.h> #include by
6313 <setjmp.h> #include.
6315 2015-01-11 Doug Evans <xdje42@gmail.com>
6317 * dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.
6319 2015-01-11 Doug Evans <xdje42@gmail.com>
6322 * NEWS: The "maint demangle" command is renamed as "demangle".
6323 * demangle.c: #include cli/cli-utils.h, language.h.
6324 (demangle_command): New function.
6325 (_initialize_demangle): Add new command "demangle".
6326 * maint.c (maintenance_demangle): Stub out.
6327 (_initialize_maint_cmds): Update help text for "maint demangle",
6328 and mark as deprecated.
6330 2015-01-11 Mark Kettenis <kettenis@gnu.org>
6332 * inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
6333 inferior_thread is a function.
6335 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
6337 * Makefile.in (.y.c): Don't munge yacc's #line
6340 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
6342 * utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
6343 to prompt for input.
6344 * tui/tui-hooks.c (tui_query_hook): Remove.
6345 (tui_install_hooks): Don't set deprecated_query_hook.
6346 * tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
6347 height calculation. Always update the command window's cur_line.
6349 2015-01-09 Pedro Alves <palves@redhat.com>
6351 * breakpoint.c (hardware_breakpoint_inserted_here_p): New
6353 * breakpoint.h (hardware_breakpoint_inserted_here_p): New
6355 * linux-nat.c (linux_nat_status_is_event): Move higher up in file.
6356 (linux_resume_one_lwp): Store the thread's PC. Adjust to clear
6358 (check_stopped_by_watchpoint): New function.
6359 (save_sigtrap): Reimplement.
6360 (linux_nat_stopped_by_watchpoint): Adjust.
6361 (linux_nat_lp_status_is_event): Delete.
6362 (stop_wait_callback): Only call save_sigtrap after storing the
6364 (status_callback): If the thread had been stopped for a breakpoint
6365 that has since been removed, discard the event and resume the LWP.
6366 (count_events_callback, select_event_lwp_callback): Use
6367 lwp_status_pending_p instead of linux_nat_lp_status_is_event.
6368 (cancel_breakpoint): Rename to ...
6369 (check_stopped_by_breakpoint): ... this. Record whether the LWP
6370 stopped for a software breakpoint or hardware breakpoint.
6371 (select_event_lwp): Only give preference to the stepping LWP in
6372 all-stop mode. Adjust comments.
6373 (stop_and_resume_callback): Remove references to new_pending_p.
6374 (linux_nat_filter_event): Likewise. Leave exit events of the
6375 leader thread pending here. Handle signal short circuiting here.
6376 Only call save_sigtrap after storing the pending waitstatus.
6377 (linux_nat_wait_1): Remove 'retry' label. Remove references to
6378 new_pending. Don't handle leaving events the caller is not
6379 interested in pending here, nor handle signal short-circuiting
6380 here. Also give equal priority to all LWPs that have had events
6381 in non-stop mode. If reporting a software breakpoint event,
6382 unadjust the LWP's PC.
6383 * linux-nat.h (enum lwp_stop_reason): New.
6384 (struct lwp_info) <stop_pc>: New field.
6385 (struct lwp_info) <stopped_by_watchpoint>: Delete field.
6386 (struct lwp_info) <stop_reason>: New field.
6387 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
6389 2015-01-09 Pedro Alves <palves@redhat.com>
6391 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
6392 Set the LWP's 'resumed' flag.
6394 2015-01-09 Pedro Alves <palves@redhat.com>
6396 * linux-nat.c (linux_resume_one_lwp): New function.
6397 (resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
6398 (linux_nat_resume): Use lwp_status_pending_p and
6399 linux_resume_one_lwp.
6400 (linux_handle_syscall_trap): Use linux_resume_one_lwp.
6401 (linux_handle_extended_wait): Use linux_resume_one_lwp.
6402 (status_callback, running_callback): Use lwp_status_pending_p.
6403 (lwp_status_pending_p): New function.
6404 (stop_and_resume_callback): Use lwp_status_pending_p.
6405 (linux_nat_filter_event): Use linux_resume_one_lwp.
6406 (linux_nat_wait_1): Always use status_callback to look for an LWP
6407 with a pending status. Use linux_resume_one_lwp.
6408 (resume_stopped_resumed_lwps): Use lwp_status_pending_p and
6409 linux_resume_one_lwp.
6411 2015-01-09 Pedro Alves <palves@redhat.com>
6413 * breakpoint.c (bp_location_inserted_here_p): New function,
6414 factored out from ...
6415 (breakpoint_inserted_here_p): ... here. Use
6416 ALL_BP_LOCATIONS_AT_ADDR.
6417 (software_breakpoint_inserted_here_p): Use
6418 bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.
6420 2014-01-09 Pedro Alves <palves@redhat.com>
6422 Skip enabling event reporting if the kernel supports
6424 * linux-thread-db.c: Include "nat/linux-ptrace.h".
6425 (thread_db_use_events): New function.
6426 (try_thread_db_load_1): Check thread_db_use_events before enabling
6428 (update_thread_state): New function.
6429 (attach_thread): Use it. Check thread_db_use_events before
6430 enabling event reporting.
6431 (thread_db_detach): Check thread_db_use_events before disabling
6433 (find_new_threads_callback): Check thread_db_use_events before
6434 enabling event reporting. Update the thread's state if not using
6435 libthread_db events.
6437 2015-01-09 Pedro Alves <palves@redhat.com>
6439 * linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
6440 about to wait for is > 0.
6441 * linux-thread-db.c (find_new_threads_callback): Ignore thread if
6442 the kernel thread ID is -1.
6444 2015-01-09 Pedro Alves <palves@redhat.com>
6446 * linux-nat.c (attach_proc_task_lwp_callback): New function.
6447 (linux_nat_attach): Use linux_proc_attach_tgid_threads.
6448 (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
6449 ptrace option flags.
6450 * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
6452 * nat/linux-procfs.c: Include <dirent.h>.
6453 (linux_proc_get_int): New parameter "warn". Handle it.
6454 (linux_proc_get_tgid): Adjust.
6455 (linux_proc_get_tracerpid): Rename to ...
6456 (linux_proc_get_tracerpid_nowarn): ... this.
6457 (linux_proc_pid_get_state): New function, factored out from
6458 (linux_proc_pid_has_state): ... this. Add new parameter "warn"
6460 (linux_proc_pid_is_gone): New function.
6461 (linux_proc_pid_is_stopped): Adjust.
6462 (linux_proc_pid_is_zombie_maybe_warn)
6463 (linux_proc_pid_is_zombie_nowarn): New functions.
6464 (linux_proc_pid_is_zombie): Use
6465 linux_proc_pid_is_zombie_maybe_warn.
6466 (linux_proc_attach_tgid_threads): New function.
6467 * nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
6468 (linux_proc_get_tracerpid): Rename to ...
6469 (linux_proc_get_tracerpid_nowarn): ... this, and update comment.
6470 (linux_proc_pid_is_gone): New declaration.
6471 (linux_proc_pid_is_zombie): Update comment.
6472 (linux_proc_pid_is_zombie_nowarn): New declaration.
6473 (linux_proc_attach_lwp_func): New typedef.
6474 (linux_proc_attach_tgid_threads): New declaration.
6475 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
6476 use nowarn functions.
6477 (linux_ptrace_attach_fail_reason_string): Move here from
6478 gdbserver/linux-low.c and rename.
6479 (ptrace_supports_feature): If the current ptrace options are not
6480 known yet, check them now, instead of asserting.
6481 * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
6484 2015-01-09 Pedro Alves <palves@redhat.com>
6486 * linux-thread-db.c (thread_db_find_new_threads_silently)
6487 (try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
6488 (find_new_threads_once): Print debug output on gdb_stdlog.
6490 2015-01-09 Chen Gang <gang.chen.5i5j@gmail.com>
6491 Pedro Alves <palves@redhat.com>
6493 * compile/compile.c: Include "gdb_wait.h".
6494 (do_rmdir): Check return value, and free 'zap'.
6496 2015-01-08 Pedro Alves <palves@redhat.com>
6497 Yao Qi <yao@codesourcery.com>
6499 * dwarf2loc.c (indirect_pieced_value): Don't call
6500 gdb_sign_extend. Call extract_signed_integer instead.
6501 * utils.c (gdb_sign_extend): Remove.
6502 * utils.h (gdb_sign_extend): Remove declaration.
6504 2015-01-07 Pierre Muller <muller@sourceware.org>
6507 * stabsread.c (define_symbol): Set language for C++ special symbols.
6509 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
6511 * inflow.c (initial_gdb_ttystate): Tweak comment.
6513 2015-01-07 Joel Brobecker <brobecker@adacore.com>
6515 * inflow.c (set_initial_gdb_ttystate): Add empty line after
6516 comment documenting function.
6518 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
6520 * terminal.h (set_initial_gdb_ttystate): Declare.
6521 * inflow.c (initial_gdb_ttystate): New static variable.
6522 (set_initial_gdb_ttystate): New setter.
6523 (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate
6524 instead of our current terminal state.
6525 * top.c (gdb_init): Call set_initial_gdb_ttystate.
6527 2015-01-07 Joel Brobecker <brobecker@adacore.com>
6529 * guile/scm-type.c (tyscm_array_1): Add comment.
6530 * python/py-type.c (typy_array_1): Add comment.
6532 2015-01-06 Joel Brobecker <brobecker@adacore.com>
6534 * guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
6535 error if N2 is equal to N1 - 1.
6537 2015-01-06 Joel Brobecker <brobecker@adacore.com>
6539 * python/py-type.c (typy_array_1): Do not raise negative-length
6540 exception if N2 is equal to N1 - 1.
6542 2015-01-03 Doug Evans <xdje42@gmail.com>
6544 * c-exp.y: Whitespace cleanup.
6545 (classify_inner_name): Remove extra ;.
6547 2015-01-02 Maciej W. Rozycki <macro@codesourcery.com>
6549 * mips-tdep.c (mips32_scan_prologue): Keep the extracted stack
6552 2015-01-02 Doug Evans <dje@google.com>
6554 * dwarf2read.c (setup_type_unit_groups): Remove outdated comment.
6556 2015-01-02 Doug Evans <dje@google.com>
6558 * symtab.h (struct symbol): Fix typo in comment.
6560 2015-01-01 Joel Brobecker <brobecker@adacore.com>
6562 Update year range in copyright notice of all files.
6564 2015-01-01 Joel Brobecker <brobecker@adacore.com>
6566 * top.c (print_gdb_version): Update copyright year to 2015.
6568 2015-01-01 Joel Brobecker <brobecker@adacore.com>
6570 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
6572 For older changes see ChangeLog-2014.
6578 version-control: never