[platform/upstream/binutils.git] / gdb / ChangeLog

2014-05-16  Pierre Muller  <muller@sourceware.org>
            Yao Qi  <yao@codesourcery.com>

        * valprint.c (print_wchar): Move the code on checking whether
        W is a printable wide char to the default branch of switch
        statement below.  Call wchar_printable instead of gdb_iswprint.

2014-05-16  Taimoor Mirza  <tmirza@codesourcery.com>

        * arm-tdep.c (thumb_analyze_prologue): Fix offset calculation for
        ldr.w and ldrd instructions.

2014-05-15  Doug Evans  <dje@google.com>

        * dwarf2read.c (read_structure_type): Delete outdated comments.

2014-05-14  Tom Tromey  <tromey@redhat.com>

        * macrocmd.c (print_macro_definition): Reindent.

2014-05-13  Doug Evans  <xdje42@gmail.com>

        * python/py-cmd.c (cmdpy_completer): Add comment.
        (completers): Make const.

2014-05-13  Simon Marchi  <simon.marchi@ericsson.com>

        * infrun.c (resume): Remove should_resume (unused).  Move up
        declaration of resume_ptid.

2014-05-13  Tom Tromey  <tromey@redhat.com>

        * language.h (unop_type_check): Remove.
        (binop_type_check): Don't declare.

2014-05-13  Andreas Arnez  <arnez@vnet.linux.ibm.com>

        * s390-linux-nat.c (fill_gregset): Remove erroneous offset 4 in
        call to regcache_raw_collect.

2014-05-12  Simon Marchi  <simon.marchi@ericsson.com>

        * mi/mi-console.c (mi_console_raw_packet): Use the value from
        mi_console->quote as the quoting character.

2014-05-12  Simon Marchi  <simon.marchi@ericsson.com>

        * MAINTAINERS (Write After Approval): Add "Simon Marchi".

2014-04-29  Tom Tromey  <tromey@redhat.com>

        * varobj.c (_initialize_varobj): Rename to "set debug varobj" and
        "show debug varobj".

2014-05-07  Kyle McMartin  <kyle@redhat.com>

        Pushed by Joel Brobecker  <brobecker@adacore.com>.
        * aarch64-tdep.c (aarch64_software_single_step): New function.
        (aarch64_gdbarch_init): Handle single stepping of atomic sequences
        with aarch64_software_single_step.

2014-05-05  Joel Brobecker  <brobecker@adacore.com>

        GDB 7.7.1 released.

2014-05-05  Keith Seitz  <keiths@redhat.com>

        * linespec.c (linespec_parse_basic): Run cleanups if a convenience
        variable or history value is successfully parsed.

2014-05-05  Yao Qi  <yao@codesourcery.com>
            Pedro Alves  <palves@redhat.com>

        * tracefile-tfile.c (tfile_xfer_partial): Record the lowest
        address of blocks that intersects the requested range.  Trim
        LEN up to LOW_ADDR_AVAILABLE if read from executable read-only
        sections.
        * ctf.c (ctf_xfer_partial): Likewise.

2014-05-05  Yao Qi  <yao@codesourcery.com>

        * printcmd.c (display_command): Remove the check to
        target_has_execution.

2014-05-03  Mark Kettenis  <kettenis@gnu.org>

        * ppcobsd-nat.c: Include "obsd-nat.h".
        (_initialize_ppcobsd_nat): Call obsd_add_target instead of
        add_target.
        * config/powerpc/obsd.mh (NATDEPFILES): Add obsd-nat.o.

2014-05-02  Sergio Durigan Junior  <sergiodj@redhat.com>

        * stap-probe.c (enum stap_arg_bitness): New enums to represent 8
        and 16-bit signed and unsigned arguments.  Update comment.
        (stap_parse_probe_arguments): Extend code to handle such
        arguments.  Use warning instead of complaint to notify about
        unrecognized bitness.

2014-05-02  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR breakpoints/16889
        * stap-probe.c (stap_parse_probe_arguments): Simplify
        check for non-prefixed probes (i.e., probes whose
        arguments do not start with "N@").  Always set the
        argument type to a sane value.

2014-05-01  David Taylor  <dtaylor@emc.com>

        * remote.c (compare_sections_command): Add -r option to compare
        all loadable read-only sections.

2014-04-30  Siva Chandra Reddy  <sivachandra@google.com>

        * dwarf2loc.c (dwarf2_locexpr_baton_eval,
        dwarf2_evaluate_property): Remove unused CORE_ADDR argument.
        Update all callers.
        * dwarf2loc.h (dwarf2_evaluate_property): Update signature.
        * gdbtypes.c (resolve_dynamic_range, resolve_dynamic_array):
        Remove unused CORE_ADDR argument.  Update all callers.

2014-04-29  Pedro Alves  <palves@redhat.com>

        * remote.c (struct packet_config) <detect>: Extend comment.
        (add_packet_config_cmd): Don't set the config's detect or support
        fields here.
        (init_all_packet_configs): Also initialize the config's 'detect'
        field.
        (reset_all_packet_configs_support): New function.
        (remote_open_1): Call reset_all_packet_configs_support instead of
        init_all_packet_configs.
        (_initialize_remote): Initialize all packet configs.  Assert that
        all packets have an associated command, except a few known
        outliers.

2014-04-28  Joel Brobecker  <brobecker@adacore.com>

        * dwarf2read.c (read_subrange_type): Handle dynamic
        DW_AT_lower_bound attributes.

2014-04-28  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_discrete_type_high_bound): Resolve the type's
        dynamic bounds before computing its upper bound.
        (ada_discrete_type_low_bound): Same as above with the lower bound.

2014-04-28  Joel Brobecker  <brobecker@adacore.com>

        * dwarf2read.c (is_dynamic_type): Return true for dynamic
        range types.  Adjust the array handling implementation to
        take advantage of this change.
        (resolve_dynamic_range): New function, mostly extracted from
        resolve_dynamic_bounds.
        (resolve_dynamic_array): New function, mostly extracted from
        resolve_dynamic_bounds.
        (resolve_dynamic_bounds): Delete.
        (resolve_dynamic_type): Reimplement.  Add handling of
        TYPE_CODE_RANGE types.

2014-04-28  Joel Brobecker  <brobecker@adacore.com>

        * ada-varobj.c (ada_varobj_describe_simple_array_child): Remove
        handling of parallel ___XA types.

2014-04-28  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_evaluate_subexp) <OP_VAR_VALUE>: Remove
        unnecessary second call to static_unwrap_type.

2014-04-27  Hui Zhu  <hui@codesourcery.com>

        * stack.c (print_frame_info): Call do_gdb_disassembly with
        DUMMY_FRAME, SIGTRAMP_FRAME and ARCH_FRAME.

2014-04-26  Doug Evans  <xdje42@gmail.com>

        * guile/scm-safe-call.c (scscm_eval_scheme_string): Fix comment.

2014-04-25  Pedro Alves  <palves@redhat.com>

        PR server/16255
        * common/linux-ptrace.c (linux_ptrace_attach_warnings): Rename to ...
        (linux_ptrace_attach_fail_reason): ... this.  Remove "warning: "
        and newline from built string.
        * common/linux-ptrace.h (linux_ptrace_attach_warnings): Rename to ...
        (linux_ptrace_attach_fail_reason): ... this.
        * linux-nat.c (linux_nat_attach): Adjust to use
        linux_ptrace_attach_fail_reason.

2014-04-25  Pedro Alves  <palves@redhat.com>

        * remote.c (struct remote_state): Remove multi_process_aware,
        non_stop_aware, cond_tracepoints, cond_breakpoints,
        breakpoint_commands, fast_tracepoints, static_tracepoints,
        install_in_trace, disconnected_tracing,
        enable_disable_tracepoints, string_tracing, and
        augmented_libraries_svr4_read fields.
        (remote_multi_process_p): Move further below in the file.
        (struct packet_config): Add comments.
        (update_packet_config): Delete function.
        (show_packet_config_cmd): Use packet_config_support.
        (add_packet_config_cmd): Use NULL as set callback.
        (packet_ok): "set remote foo-packet"-style commands no longer
        change config->supported -- adjust.
        (PACKET_ConditionalTracepoints, PACKET_ConditionalBreakpoints)
        (PACKET_BreakpointCommands, PACKET_FastTracepoints)
        (PACKET_StaticTracepoints, PACKET_InstallInTrace): Add comments.
        (PACKET_QNonStop, PACKET_multiprocess_feature)
        (PACKET_EnableDisableTracepoints_feature, PACKET_tracenz_feature)
        (PACKET_DisconnectedTracing_feature)
        (PACKET_augmented_libraries_svr4_read_feature): New enum values.
        (set_remote_protocol_packet_cmd): Delete function.
        (packet_config_support, packet_support): New functions.
        (set_remote_protocol_Z_packet_cmd): Don't call
        update_packet_config.
        (remote_query_attached, remote_pass_signals)
        (remote_program_signals, remote_threads_info)
        (remote_threads_extra_info, remote_start_remote): Use
        packet_support.
        (remote_start_remote): Use packet_config_support and
        packet_support.
        (init_all_packet_configs): Set all packets to unknown support,
        instead of calling update_packet_config.
        (remote_check_symbols): Use packet_support.
        (remote_supported_packet): Unconditionally set the packet config's
        support status.
        (remote_multi_process_feature, remote_non_stop_feature)
        (remote_cond_tracepoint_feature, remote_cond_breakpoint_feature)
        (remote_breakpoint_commands_feature)
        (remote_fast_tracepoint_feature, remote_static_tracepoint_feature)
        (remote_install_in_trace_feature)
        (remote_disconnected_tracing_feature)
        (remote_enable_disable_tracepoint_feature)
        (remote_string_tracing_feature)
        (remote_augmented_libraries_svr4_read_feature): Delete functions.
        (remote_protocol_features): Adjust to use remote_supported_packet
        for "augmented-libraries-svr4-read", "multiprocess", "QNonStop",
        "ConditionalTracepoints", "ConditionalBreakpoints",
        "BreakpointCommands", "FastTracepoints", "StaticTracepoints",
        "InstallInTrace", "DisconnectedTracing", "DisconnectedTracing",
        "EnableDisableTracepoints", and "tracenz".
        (remote_query_supported): Use packet_support.
        (remote_open_1): Adjust.
        (extended_remote_attach_1): Use packet_support.  Switch on the
        result of packet_ok instead of checking whether the packet ended
        up disabled.
        (remote_vcont_resume): Use packet_support.
        (remote_resume, remote_stop_ns, fetch_register_using_p)
        (remote_prepare_to_store, store_register_using_P)
        (check_binary_download, remote_write_bytes): Use packet_support.
        (remote_vkill): Use packet_support.  Switch on the result of
        packet_ok instead of checking whether the packet ended up
        disabled.
        (extended_remote_supports_disable_randomization): Use
        packet_support.
        (extended_remote_run): Switch on the result of packet_ok instead
        of checking whether the packet ended up disabled.
        (remote_insert_breakpoint, remote_remove_breakpoint)
        (remote_insert_watchpoint, remote_remove_watchpoint)
        (remote_insert_hw_breakpoint, remote_remove_hw_breakpoint): Use
        packet_support.
        (remote_search_memory): Use packet_config_support.
        (remote_get_thread_local_address, remote_get_tib_address)
        (remote_hostio_send_command, remote_can_execute_reverse): Use
        packet_support.
        (remote_supports_cond_tracepoints)
        (remote_supports_cond_breakpoints)
        (remote_supports_fast_tracepoints)
        (remote_supports_static_tracepoints)
        (remote_supports_install_in_trace)
        (remote_supports_enable_disable_tracepoint)
        (remote_supports_string_tracing)
        (remote_can_run_breakpoint_commands): Rewrite, checking whether
        the packet config says the feature is enabled or disabled.
        (remote_download_tracepoint, remote_trace_set_readonly_regions)
        (remote_get_trace_status): Use packet_support.
        (remote_set_disconnected_tracing): Adjust to check whether the
        feature is enabled with packet_support.
        (remote_set_trace_buffer_size, remote_use_agent)
        (remote_can_use_agent, remote_supports_btrace): Use
        packet_support.
        (remote_enable_btrace, remote_disable_btrace, remote_read_btrace):
        Use packet_config_support.
        (remote_augmented_libraries_svr4_read): Rewrite, checking whether
        the packet config says the feature is enabled or disabled.
        (set_range_stepping): Use packet_support.

2014-04-25  Tom Tromey  <tromey@redhat.com>

        * cli/cli-cmds.c (_initialize_cli_cmds): Document "quit" command's
        argument.

2014-04-24  Sanimir Agovic  <sanimir.agovic@intel.com>

        * NEWS: Mention support for C99 variable length arrays.

2014-04-24  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (standard_exc): Expand introductory comment.

2014-04-24  Michael Sturm  <michael.sturm@mintel.com>
            Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * amd64-linux-nat.c (amd64_linux_gregset32_reg_offset): Add
        AVX512 registers.
        (amd64_linux_read_description): Add code to handle AVX512 xstate
        mask and return respective tdesc.
        * amd64-linux-tdep.c: Include features/i386/amd64-avx512-linux.c
        and features/i386/x32-avx512-linux.c.
        (amd64_linux_gregset_reg_offset): Add AVX512 registers.
        (amd64_linux_core_read_description): Add code to handle AVX512
        xstate mask and return respective tdesc.
        (_initialize_amd64_linux_tdep): Initialize AVX512 tdesc.
        * amd64-linux-tdep.h (AMD64_LINUX_ORIG_RAX_REGNUM): Adjust regnum
        calculation.
        (AMD64_LINUX_NUM_REGS): Adjust to new number of registers.
        (tdesc_amd64_avx512_linux): New prototype.
        (tdesc_x32_avx512_linux): Likewise.
        * amd64-tdep.c: Include features/i386/amd64-avx512.c and
        features/i386/x32-avx512.c.
        (amd64_ymm_avx512_names): New register names for pseudo
        registers YMM16-31.
        (amd64_ymmh_avx512_names): New register names for raw registers
        YMMH16-31.
        (amd64_k_names): New register names for K registers.
        (amd64_zmmh_names): New register names for ZMM raw registers.
        (amd64_zmm_names): New registers names for ZMM pseudo registers.
        (amd64_xmm_avx512_names): New register names for XMM16-31
        registers.
        (amd64_pseudo_register_name): Add code to return AVX512 pseudo
        registers.
        (amd64_init_abi): Add code to intitialize AVX512 tdep variables
        if feature is present.
        (_initialize_amd64_tdep): Call AVX512 tdesc initializers.
        * amd64-tdep.h (enum amd64_regnum): Add AVX512 registers.
        (AMD64_NUM_REGS): Adjust to new number of registers.
        * i386-linux-nat.c (GETXSTATEREGS_SUPPLIES): Extend range of
        registers supplied via XSTATE by AVX512 registers.
        (i386_linux_read_description): Add case for AVX512.
        * i386-linux-tdep.c: Include i386-avx512-linux.c.
        (i386_linux_gregset_reg_offset): Add AVX512 registers.
        (i386_linux_core_read_description): Add case for AVX512.
        (i386_linux_init_abi): Install supported register note section
        for AVX512.
        (_initialize_i386_linux_tdep): Add call to tdesc init function for
        AVX512.
        * i386-linux-tdep.h (I386_LINUX_NUM_REGS): Set number of
        registers to be number of zmm7h + 1.
        (tdesc_i386_avx512_linux): Add tdesc for AVX512 registers.
        * i386-tdep.c: Include features/i386/i386-avx512.c.
        (i386_zmm_names): Add ZMM pseudo register names array.
        (i386_zmmh_names): Add ZMM raw register names array.
        (i386_k_names): Add K raw register names array.
        (num_lower_zmm_regs): Add constant for the number of lower ZMM
        registers. AVX512 has 16 more ZMM registers than there are YMM
        registers.
        (i386_zmmh_regnum_p): Add function to look up register number of
        ZMM raw registers.
        (i386_zmm_regnum_p): Likewise for ZMM pseudo registers.
        (i386_k_regnum_p): Likewise for K raw registers.
        (i386_ymmh_avx512_regnum_p): Likewise for additional YMM raw
        registers added by AVX512.
        (i386_ymm_avx512_regnum_p): Likewise for additional YMM pseudo
        registers added by AVX512.
        (i386_xmm_avx512_regnum_p): Likewise for additional XMM registers
        added by AVX512.
        (i386_register_name): Add code to hide YMMH16-31 and ZMMH0-31.
        (i386_pseudo_register_name): Add ZMM pseudo registers.
        (i386_zmm_type): Construct and return vector registers type for ZMM
        registers.
        (i386_pseudo_register_type): Return appropriate type for YMM16-31,
        ZMM0-31 pseudo registers and K registers.
        (i386_pseudo_register_read_into_value): Add code to read K, ZMM
        and YMM16-31 registers from register cache.
        (i386_pseudo_register_write): Add code to write  K, ZMM and
        YMM16-31 registers.
        (i386_register_reggroup_p): Add code to include/exclude AVX512
        registers in/from respective register groups.
        (i386_validate_tdesc_p): Handle AVX512 feature, add AVX512
        registers if feature is present in xcr0.
        (i386_gdbarch_init): Add code to initialize AVX512 feature
        variables in tdep structure, wire in pseudo registers and call
        initialize_tdesc_i386_avx512.
        * i386-tdep.h (struct gdbarch_tdep): Add AVX512 related
        variables.
        (i386_regnum): Add AVX512 registers.
        (I386_SSE_NUM_REGS): New define for number of SSE registers.
        (I386_AVX_NUM_REGS): Likewise for AVX registers.
        (I386_AVX512_NUM_REGS): Likewise for AVX512 registers.
        (I386_MAX_REGISTER_SIZE): Change to 64 bytes, ZMM registers are
        512 bits wide.
        (i386_xmm_avx512_regnum_p): New prototype for register look up.
        (i386_ymm_avx512_regnum_p): Likewise.
        (i386_k_regnum_p): Likewise.
        (i386_zmm_regnum_p): Likewise.
        (i386_zmmh_regnum_p): Likewise.
        * i387-tdep.c : Update year in copyright notice.
        (xsave_ymm_avx512_offset): New table for YMM16-31 offsets in
        XSAVE buffer.
        (XSAVE_YMM_AVX512_ADDR): New macro.
        (xsave_xmm_avx512_offset): New table for XMM16-31 offsets in
        XSAVE buffer.
        (XSAVE_XMM_AVX512_ADDR): New macro.
        (xsave_avx512_k_offset): New table for K register offsets in
        XSAVE buffer.
        (XSAVE_AVX512_K_ADDR): New macro.
        (xsave_avx512_zmm_h_offset): New table for ZMM register offsets
        in XSAVE buffer.
        (XSAVE_AVX512_ZMM_H_ADDR): New macro.
        (i387_supply_xsave): Add code to supply AVX512 registers to XSAVE
        buffer.
        (i387_collect_xsave): Add code to collect AVX512 registers from
        XSAVE buffer.
        * i387-tdep.h (I387_NUM_XMM_AVX512_REGS): New define for number
        of XMM16-31 registers.
        (I387_NUM_K_REGS): New define for number of K registers.
        (I387_K0_REGNUM): New define for K0 register number.
        (I387_NUM_ZMMH_REGS): New define for number of ZMMH registers.
        (I387_ZMM0H_REGNUM): New define for ZMM0H register number.
        (I387_NUM_YMM_AVX512_REGS): New define for number of YMM16-31
        registers.
        (I387_YMM16H_REGNUM): New define for YMM16H register number.
        (I387_XMM16_REGNUM): New define for XMM16 register number.
        (I387_YMM0_REGNUM): New define for YMM0 register number.
        (I387_KEND_REGNUM): New define for last K register number.
        (I387_ZMMENDH_REGNUM): New define for last ZMMH register number.
        (I387_YMMH_AVX512_END_REGNUM): New define for YMM31 register
        number.
        (I387_XMM_AVX512_END_REGNUM): New define for XMM31 register
        number.
        * common/i386-xstate.h: Add AVX 3.1 feature bits, mask and XSTATE
        size.
        * features/Makefile: Add AVX512 related files.
        * features/i386/32bit-avx512.xml: New file.
        * features/i386/64bit-avx512.xml: Likewise.
        * features/i386/amd64-avx512-linux.c: Likewise.
        * features/i386/amd64-avx512-linux.xml: Likewise.
        * features/i386/amd64-avx512.c: Likewise.
        * features/i386/amd64-avx512.xml: Likewise.
        * features/i386/i386-avx512-linux.c: Likewise.
        * features/i386/i386-avx512-linux.xml: Likewise.
        * features/i386/i386-avx512.c: Likewise.
        * features/i386/i386-avx512.xml: Likewise.
        * features/i386/x32-avx512-linux.c: Likewise.
        * features/i386/x32-avx512-linux.xml: Likewise.
        * features/i386/x32-avx512.c: Likewise.
        * features/i386/x32-avx512.xml: Likewise.
        * regformats/i386/amd64-avx512-linux.dat: New file.
        * regformats/i386/amd64-avx512.dat: Likewise.
        * regformats/i386/i386-avx512-linux.dat: Likewise.
        * regformats/i386/i386-avx512.dat: Likewise.
        * regformats/i386/x32-avx512-linux.dat: Likewise.
        * regformats/i386/x32-avx512.dat: Likewise.
        * NEWS: Add note about new support for AVX512.


2014-04-23  Pedro Alves  <palves@redhat.com>

        * breakpoint.c (insert_bp_location): Tolerate errors if the
        breakpoint is set in a user-loaded objfile.
        (remove_breakpoint_1): Likewise.  Also tolerate errors if the
        location is marked shlib_disabled.  If the breakpoint is set in a
        user-loaded objfile is a GDB-side memory breakpoint, validate it
        before uninsertion.  (disable_breakpoints_in_freed_objfile): Skip
        non-OBJF_USERLOADED objfiles.  Don't clear the location's inserted
        flag.
        * mem-break.c (memory_validate_breakpoint): New function.
        * objfiles.c (userloaded_objfile_contains_address_p): New
        function.
        * objfiles.h (userloaded_objfile_contains_address_p): Declare.
        * target.h (memory_validate_breakpoint): New declaration.

2014-04-23  Pedro Alves  <palves@redhat.com>

        * breakpoint.c (insert_bp_location, remove_breakpoint_1): If
        the breakpoint is set in a shared library, only suppress
        errors for software breakpoints, not hardware breakpoints.

2014-04-22  Pedro Alves  <palves@redhat.com>

        * infrun.c (schedlock_applies): New function, factored out from
        find_thread_needs_step_over.
        (find_thread_needs_step_over): Use it.
        (switch_back_to_stepped_thread): Always clear trap_expected if the
        step over is finished.  Return early if scheduler locking applies.
        Look for the stepping thread and a potential step-over thread with
        a single loop.
        (currently_stepping_or_nexting_callback): Delete.

2014-04-22  Nick Clifton  <nickc@redhat.com>

        * NEWS: Mention that ARM sim now supports tracing.

2014-04-22  Yao Qi  <yao@codesourcery.com>

        * tracefile-tfile.c (tfile_fetch_registers): Move the bottom
        to ...
        * tracefile.c (tracefile_fetch_registers): ... it.  New
        function.
        * tracefile.h (tracefile_fetch_registers): Declare.
        * ctf.c (ctf_fetch_registers): Remove the bottom.  Call
        tracefile_fetch_registers.

2014-04-19  Eli Zaretskii  <eliz@gnu.org>

        PR gdb/14018
        * windows-nat.c (thread_rec): Don't display a warning when
        SuspendThread fails with ERROR_ACCESS_DENIED.  If SuspendThread
        fails for any reason, set th->suspended to -1, so that we don't
        try to resume such a thread.  Also, don't return NULL in these
        cases, to avoid completely ruin the session due to "PC register is
        not available" error.
        (do_windows_fetch_inferior_registers): Check errors in
        GetThreadContext call.
        (windows_continue): Accept an additional argument KILLED; if not
        zero, ignore errors in the SetThreadContext call, since the
        inferior was killed and is shutting down.
        (windows_resume, get_windows_debug_event)
        (windows_create_inferior, windows_mourn_inferior)
        (windows_kill_inferior): All callers of windows_continue changed
        to adjust to its new calling sequence.

2014-04-19  Yao Qi  <yao@codesourcery.com>

        * ctf.c (ctf_open): Call post_create_inferior.

2014-04-19  Yao Qi  <yao@codesourcery.com>

        * ctf.c (handle_id): New static variable.
        (ctf_open_dir): Get handle_id from bt_context_add_trace return
        value.  Get the declaration of event "register" and get length
        of field "contents".

2014-04-19  Yao Qi  <yao@codesourcery.com>

        * ctf.c (ctf_xfer_partial): Check 'name' is NULL before strcmp.

2014-04-18  Siva Chandra Reddy  <sivachandra@google.com>

        * valops.c (oload_method_static): Remove unnecessary argument
        METHOD.  Update all callers.

2014-04-18  Pedro alves  <palves@redhat.com>
            Tom Tromey  <tromey@redhat.com>

        PR backtrace/15558
        * frame.c (get_prev_frame_1): Rename to ...
        (get_prev_frame_always): ... this, and make extern.  Adjust.
        (skip_artificial_frames): Use get_prev_frame_always.
        (frame_unwind_caller_id, frame_pop, get_prev_frame)
        (get_frame_unwind_stop_reason): Adjust to rename.
        * frame.h (get_prev_frame_always): Declare.
        * inline-frame.c: Include frame.h.
        (inline_frame_this_id): Use get_prev_frame_always.

2014-04-18  Tristan Gingold  <gingold@adacore.com>

        * solib-darwin.c (darwin_solib_create_inferior_hook): Simplify
        code by using bfd_mach_o_get_base_address.

2014-04-17  Ulrich Weigand  <uweigand@de.ibm.com>

        * spu-tdep.c: Include "dwarf2-frame.h" and "ax.h".
        (spu_ax_pseudo_register_collect): New function.
        (spu_ax_pseudo_register_push_stack): Likewise.
        (spu_dwarf_reg_to_regnum): Likewise.
        (spu_gdbarch_init): Install them.  Append DWARF unwinders.

2014-04-17  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh (value_from_register): Make class "m" instead of "f".
        Replace FRAME argument with FRAME_ID.
        * gdbarch.c, gdbarch.h: Regenerate.
        * findvar.c (default_value_from_register): Add GDBARCH argument;
        replace FRAME by FRAME_ID.  No longer call get_frame_id.
        (value_from_register): Update call to gdbarch_value_from_register.
        * value.h (default_value_from_register): Update prototype.
        * s390-linux-tdep.c (s390_value_from_register): Update interface
        and call to default_value_from_register.
        * spu-tdep.c (spu_value_from_register): Likewise.

        * findvar.c (address_from_register): Remove TYPE argument.
        Do not call value_from_register; use gdbarch_value_from_register
        with null_frame_id instead.
        * value.h (address_from_register): Update prototype.
        * dwarf2-frame.c (read_addr_from_reg): Use address_from_register.
        * dwarf2loc.c (dwarf_expr_read_addr_from_reg): Update for
        address_from_register interface change.

2014-04-17  Yao Qi  <yao@codesourcery.com>

        * gdbtypes.h: Update comments to link to types and macros'
        definitions.

2014-04-16  Siva Chandra Reddy  <sivachandra@google.com>

        * gdbtypes.h: Remove definition of the macro TYPE_FN_FIELDS.

2014-04-16  Keith Seitz  <keiths@redhat.com>

        PR gdb/15827
        * dwarf2read.c (skip_one_die): Check that all relative-offset
        sibling DIEs fall within range of the current reader's buffer.
        (read_partial_die): Likewise.

2014-04-16  Keith Seitz  <keiths@redhat.com>

        PR c++/16597
        * cp-namespace.c (lookup_symbol_file): If the type name of
        `this' is NULL, return immediately.

2014-04-14  Keith Seitz  <keiths@redhat.com>

        PR c++/16253
        * ada-lang.c (ada_symbol_matches_domain): Moved here and renamed
        from symbol_matches_domain in symtab.c. All local callers
        of symbol_matches_domain updated.
        (standard_lookup): If DOMAIN is VAR_DOMAIN and no symbol is found,
        search STRUCT_DOMAIN.
        (ada_find_any_type_symbol): Do not search STRUCT_DOMAIN
        independently.  standard_lookup will do that automatically.
        * cp-namespace.c (cp_lookup_symbol_nonlocal): Explain when/why
        VAR_DOMAIN searches may return a STRUCT_DOMAIN match.
        (cp_lookup_symbol_in_namespace): Likewise.
        If no VAR_DOMAIN symbol is found, search STRUCT_DOMAIN.
        (cp_lookup_symbol_exports): Explain when/why VAR_DOMAIN searches
        may return a STRUCT_DOMAIN match.
        (lookup_symbol_file): Search for the class name in STRUCT_DOMAIN.
        * cp-support.c: Include language.h.
        (inspect_type): Explicitly search STRUCT_DOMAIN before searching
        VAR_DOMAIN.
        * psymtab.c (match_partial_symbol): Compare the requested
        domain with the symbol's domain directly.
        (lookup_partial_symbol): Likewise.
        * symtab.c (lookup_symbol_in_language): Explain when/why
        VAR_DOMAIN searches may return a STRUCT_DOMAIN match.
        If no VAR_DOMAIN symbol is found, search STRUCT_DOMAIN for
        appropriate languages.
        (symbol_matches_domain): Renamed `ada_symbol_matches_domain'
        and moved to ada-lang.c
        (lookup_block_symbol): Explain that this function only returns
        symbol matching the requested DOMAIN.
        Compare the requested domain with the symbol's domain directly.
        (iterate_over_symbols): Compare the requested domain with the
        symbol's domain directly.
        * symtab.h (symbol_matches_domain): Remove.

2014-04-14  Tom Tromey  <tromey@redhat.com>

        PR c++/15246:
        * c-exp.y (type_aggregate_p): New function.
        (qualified_name, classify_inner_name): Use it.
        * c-typeprint.c (c_type_print_base): Handle TYPE_DECLARED_CLASS
        and TYPE_TARGET_TYPE of an enum type.
        * dwarf2read.c (read_enumeration_type): Set TYPE_DECLARED_CLASS on
        an enum type.
        (determine_prefix) <case DW_TAG_enumeration_type>: New case;
        handle TYPE_DECLARED_CLASS.
        * gdbtypes.c (rank_one_type): Handle TYPE_DECLARED_CLASS on enum
        types.
        * gdbtypes.h (TYPE_DECLARED_CLASS): Update comment.
        * valops.c (enum_constant_from_type): New function.
        (value_aggregate_elt): Use it.
        * cp-namespace.c (cp_lookup_nested_symbol): Handle
        TYPE_CODE_ENUM.

2014-04-14  Tom Tromey  <tromey@redhat.com>

        * valops.c (value_aggregate_elt, value_struct_elt_for_reference)
        (value_namespace_elt, value_maybe_namespace_elt): Make "name"
        const.
        * value.h (value_aggregate_elt): Update.

2014-04-14  Tom Tromey  <tromey@redhat.com>

        * dwarf2read.c (read_enumeration_type): Handle DW_AT_type.

2014-04-14  Sanimir Agovic  <sanimir.agovic@intel.com>

        * eval.c (evaluate_subexp_for_sizeof): Add enum noside argument.
        (evaluate_subexp_standard): Pass noside argument.
        (evaluate_subexp_for_sizeof) <BINOP_SUBSCRIPT>: Handle subscript case
        if noside equals EVAL_NORMAL. If the subscript yields a vla type
        re-evaluate subscript operation with EVAL_NORMAL to enable sideffects.
        * gdbtypes.c (resolve_dynamic_bounds): Mark bound as evaluated.
        * gdbtypes.h (enum range_flags): Add RANGE_EVALUATED case.

2014-04-14  Sanimir Agovic  <sanimir.agovic@intel.com>

        * findvar.c (default_read_var_value): Resolve dynamic bounds if location
        points to a constant blob.

2014-04-14  Sanimir Agovic  <sanimir.agovic@intel.com>

        * dwarf2read.c (read_subrange_type): Convert DW_AT_count to a dynamic
        property and store it as the high bound and flag the range accordingly.
        * gdbtypes.c (resolve_dynamic_bounds): If range is flagged as
        RANGE_UPPER_BOUND_IS_COUNT assign low + high - 1 as the new high bound.
        * gdbtypes.h (enum range_flags): New enum.
        (struct range_bounds): Add flags member.

2014-04-14  Sanimir Agovic  <sanimir.agovic@intel.com>

        * c-typeprint.c (c_type_print_varspec_suffix): Added
        check for not yet resolved high bound. If unresolved, print
        "variable length" string to the console instead of random
        length.

2014-04-14  Sanimir Agovic  <sanimir.agovic@intel.com>

        * ada-lang.c (ada_value_primitive_packed_val): Re-fetch type from
        value.
        (ada_template_to_fixed_record_type_1): Likewise.
        (ada_to_fixed_type_1): Likewise.
        * cp-valprint.c (cp_print_value_fields_rtti): Likewise.
        (cp_print_value): Likewise.
        * d-valprint.c (dynamic_array_type): Likewise.
        * findvar.c (address_of_variable): Likewise.
        * jv-valprint.c (java_value_print): Likewise.
        * valops.c (value_ind): Likewise.
        * value.c (coerce_ref): Likewise.

2014-04-14  Sanimir Agovic  <sanimir.agovic@intel.com>

        * eval.c (evaluate_subexp_for_sizeof) <UNOP_IND>: Create an indirect
        value and retrieve the dynamic type size.

2014-04-14  Sanimir Agovic  <sanimir.agovic@intel.com>

        * eval.c (evaluate_subexp_for_sizeof) <OP_VAR_VALUE>: If the type
        passed to sizeof is dynamic evaluate the argument to compute the length.

2014-04-14  Sanimir Agovic  <sanimir.agovic@intel.com>
            Joel Brobecker  <brobecker@adacore.com>

        * dwarf2loc.c (dwarf2_locexpr_baton_eval): New function.
        (dwarf2_evaluate_property): New function.
        * dwarf2loc.h (dwarf2_evaluate_property): New function prototype.
        * dwarf2read.c (attr_to_dynamic_prop): New function.
        (read_subrange_type): Use attr_to_dynamic_prop to read high bound
        attribute.
        * gdbtypes.c: Include dwarf2loc.h.
        (is_dynamic_type): New function.
        (resolve_dynamic_type): New function.
        (resolve_dynamic_bounds): New function.
        (get_type_length): New function.
        (check_typedef): Use get_type_length to compute type length.
        * gdbtypes.h (TYPE_HIGH_BOUND_KIND): New macro.
        (TYPE_LOW_BOUND_KIND): New macro.
        (is_dynamic_type): New function prototype.
        * value.c (value_from_contents_and_address): Call resolve_dynamic_type
        to resolve dynamic properties of the type. Update comment.
        * valops.c (get_value_at, value_at, value_at_lazy): Update comment.

2014-04-14  Richard Henderson  <rth@redhat.com>

        * alpha-linux-nat.c (_initialize_alpha_linux_nat): Fix prototype.

2014-04-12  Siva Chandra Reddy  <sivachandra@google.com>
            Doug Evans  <xdje42@gmail.com>

        * guile/scm-value.c (gdbscm_value_dynamic_type): Use coerce_ref to
        dereference TYPE_CODE_REF values.

2014-04-11  Joel Brobecker  <brobecker@adacore.com>

        Revert the following changes due to regressions:

        * dwarf2loc.c (dwarf2_locexpr_baton_eval): New function.
        (dwarf2_evaluate_property): New function.
        * dwarf2loc.h (dwarf2_evaluate_property): New function prototype.
        * dwarf2read.c (attr_to_dynamic_prop): New function.
        (read_subrange_type): Use attr_to_dynamic_prop to read high bound
        attribute.
        * gdbtypes.c: Include dwarf2loc.h.
        (is_dynamic_type): New function.
        (resolve_dynamic_type): New function.
        (resolve_dynamic_bounds): New function.
        (get_type_length): New function.
        (check_typedef): Use get_type_length to compute type length.
        * gdbtypes.h (TYPE_HIGH_BOUND_KIND): New macro.
        (TYPE_LOW_BOUND_KIND): New macro.
        (is_dynamic_type): New function prototype.
        * value.c (value_from_contents_and_address): Call resolve_dynamic_type
        to resolve dynamic properties of the type. Update comment.
        * valops.c (get_value_at, value_at, value_at_lazy): Update comment.

        * eval.c (evaluate_subexp_for_sizeof) <OP_VAR_VALUE>: If the type
        passed to sizeof is dynamic evaluate the argument to compute the length.

        * eval.c (evaluate_subexp_for_sizeof) <UNOP_IND>: Create an indirect
        value and retrieve the dynamic type size.

        * ada-lang.c (ada_value_primitive_packed_val): Re-fetch type from value.
        (ada_template_to_fixed_record_type_1): Likewise.
        (ada_to_fixed_type_1): Likewise.
        * cp-valprint.c (cp_print_value_fields_rtti): Likewise.
        (cp_print_value): Likewise.
        * d-valprint.c (dynamic_array_type): Likewise.
        * eval.c (evaluate_subexp_with_coercion): Likewise.
        * findvar.c (address_of_variable): Likewise.
        * jv-valprint.c (java_value_print): Likewise.
        * valops.c (value_ind): Likewise.
        * value.c (coerce_ref): Likewise.

        * c-typeprint.c (c_type_print_varspec_suffix): Added
        check for not yet resolved high bound. If unresolved, print
        "variable length" string to the console instead of random
        length.

        * dwarf2read.c (read_subrange_type): Convert DW_AT_count to a dynamic
        property and store it as the high bound and flag the range accordingly.
        * gdbtypes.c (resolve_dynamic_bounds): If range is flagged as
        RANGE_UPPER_BOUND_IS_COUNT assign low + high - 1 as the new high bound.
        * gdbtypes.h (enum range_flags): New enum.
        (struct range_bounds): Add flags member.

        * findvar.c (default_read_var_value): Resolve dynamic bounds if location
        points to a constant blob.

        * eval.c (evaluate_subexp_for_sizeof): Add enum noside argument.
        (evaluate_subexp_standard): Pass noside argument.
        (evaluate_subexp_for_sizeof) <BINOP_SUBSCRIPT>: Handle subscript case
        if noside equals EVAL_NORMAL. If the subscript yields a vla type
        re-evaluate subscript operation with EVAL_NORMAL to enable sideffects.
        * gdbtypes.c (resolve_dynamic_bounds): Mark bound as evaluated.
        * gdbtypes.h (enum range_flags): Add RANGE_EVALUATED case.

2014-04-11  Keith Seitz  <keiths@redhat.com>

        PR c++/16675
        * c-exp.y (exp : SIZEOF '(' type ')'): Handle reference types.
        * eval.c (evaluate_subexp_for_sizeof): Refactor and handle
        reference types.

2014-04-11  Sanimir Agovic  <sanimir.agovic@intel.com>

        * eval.c (evaluate_subexp_for_sizeof): Add enum noside argument.
        (evaluate_subexp_standard): Pass noside argument.
        (evaluate_subexp_for_sizeof) <BINOP_SUBSCRIPT>: Handle subscript case
        if noside equals EVAL_NORMAL. If the subscript yields a vla type
        re-evaluate subscript operation with EVAL_NORMAL to enable sideffects.
        * gdbtypes.c (resolve_dynamic_bounds): Mark bound as evaluated.
        * gdbtypes.h (enum range_flags): Add RANGE_EVALUATED case.

2014-04-11  Sanimir Agovic  <sanimir.agovic@intel.com>

        * findvar.c (default_read_var_value): Resolve dynamic bounds if location
        points to a constant blob.

2014-04-11  Sanimir Agovic  <sanimir.agovic@intel.com>

        * dwarf2read.c (read_subrange_type): Convert DW_AT_count to a dynamic
        property and store it as the high bound and flag the range accordingly.
        * gdbtypes.c (resolve_dynamic_bounds): If range is flagged as
        RANGE_UPPER_BOUND_IS_COUNT assign low + high - 1 as the new high bound.
        * gdbtypes.h (enum range_flags): New enum.
        (struct range_bounds): Add flags member.

2014-04-11  Sanimir Agovic  <sanimir.agovic@intel.com>

        * c-typeprint.c (c_type_print_varspec_suffix): Added
        check for not yet resolved high bound. If unresolved, print
        "variable length" string to the console instead of random
        length.

2014-04-11  Sanimir Agovic  <sanimir.agovic@intel.com>

        * ada-lang.c (ada_value_primitive_packed_val): Re-fetch type from value.
        (ada_template_to_fixed_record_type_1): Likewise.
        (ada_to_fixed_type_1): Likewise.
        * cp-valprint.c (cp_print_value_fields_rtti): Likewise.
        (cp_print_value): Likewise.
        * d-valprint.c (dynamic_array_type): Likewise.
        * eval.c (evaluate_subexp_with_coercion): Likewise.
        * findvar.c (address_of_variable): Likewise.
        * jv-valprint.c (java_value_print): Likewise.
        * valops.c (value_ind): Likewise.
        * value.c (coerce_ref): Likewise.

2014-04-11  Sanimir Agovic  <sanimir.agovic@intel.com>

        * eval.c (evaluate_subexp_for_sizeof) <UNOP_IND>: Create an indirect
        value and retrieve the dynamic type size.

2014-04-11  Sanimir Agovic  <sanimir.agovic@intel.com>

        * eval.c (evaluate_subexp_for_sizeof) <OP_VAR_VALUE>: If the type
        passed to sizeof is dynamic evaluate the argument to compute the length.

2014-04-11  Sanimir Agovic  <sanimir.agovic@intel.com>

        * dwarf2loc.c (dwarf2_locexpr_baton_eval): New function.
        (dwarf2_evaluate_property): New function.
        * dwarf2loc.h (dwarf2_evaluate_property): New function prototype.
        * dwarf2read.c (attr_to_dynamic_prop): New function.
        (read_subrange_type): Use attr_to_dynamic_prop to read high bound
        attribute.
        * gdbtypes.c: Include dwarf2loc.h.
        (is_dynamic_type): New function.
        (resolve_dynamic_type): New function.
        (resolve_dynamic_bounds): New function.
        (get_type_length): New function.
        (check_typedef): Use get_type_length to compute type length.
        * gdbtypes.h (TYPE_HIGH_BOUND_KIND): New macro.
        (TYPE_LOW_BOUND_KIND): New macro.
        (is_dynamic_type): New function prototype.
        * value.c (value_from_contents_and_address): Call resolve_dynamic_type
        to resolve dynamic properties of the type. Update comment.
        * valops.c (get_value_at, value_at, value_at_lazy): Update comment.

2014-04-11  Sanimir Agovic  <sanimir.agovic@intel.com>

        * dwarf2read.c (read_subrange_type): Use struct bound_prop for
        declaring high/low bounds and change uses accordingly. Call
        create_range_type instead of create_static_range_type.
        * gdbtypes.c (create_range_type): New function.
        (create_range_type): Convert bounds into struct bound_prop and pass
        them to create_range_type.
        * gdbtypes.h (struct bound_prop): New struct.
        (create_range_type): New function prototype.
        (struct range_bounds): Use struct bound_prop instead of LONGEST for
        high/low bounds. Remove low_undefined/high_undefined and adapt all uses.
        (TYPE_LOW_BOUND,TYPE_HIGH_BOUND): Adapt macros to refer to the static
        part of the bound.
        * parse.c (follow_types): Set high bound kind to BOUND_UNDEFINED.

2014-04-11  Sanimir Agovic  <sanimir.agovic@intel.com>

        * gdbtypes.c (create_static_range_type): Renamed from create_range_type.
        * gdbtypes.h (create_static_range_type): Renamed from create_range_type.
        * ada-lang.c: All uses of create_range_type updated.
        * coffread.c: All uses of create_range_type updated.
        * dwarf2read.c: All uses of create_range_type updated.
        * f-exp.y: All uses of create_range_type updated.
        * m2-valprint.c: All uses of create_range_type updated.
        * mdebugread.c: All uses of create_range_type updated.
        * stabsread.c: All uses of create_range_type updated.
        * valops.c: All uses of create_range_type updated.
        * valprint.c: All uses of create_range_type updated.

2014-04-10  Pedro Alves  <palves@redhat.com>

        * breakpoint.c (single_step_breakpoints)
        (single_step_gdbarch): Move up in the file.
        (one_breakpoint_xfer_memory): New function, factored out from ...
        (breakpoint_xfer_memory): ... here.  Also process single-step
        breakpoints.

2014-04-09  Tristan Gingold  <gingold@adacore.com>

        * darwin-nat.c (darwin_check_new_threads): Fix port leak, add
        comments.
        (darwin_decode_exception_message): Free port only after use.

2014-04-08  Pierre Langlois  <pierre.langlois@embecosm.com>

        * avr-tdep.c (struct gdbarch_tdep): Mention avrxmega in the comment.
        (avr_gdbarch_init): Add xmega architectures given by bfd_architecture
        when setting the size of call_length.

2014-04-07  Siva Chandra Reddy  <sivachandra@google.com>

        * python/py-value.c (valpy_get_dynamic_type): Use coerce_ref to
        dereference TYPE_CODE_REF values.

2014-04-07  Joel Brobecker  <brobecker@adacore.com>

        * darwin-nat.c (darwin_decode_message): Remove trailing '\n' at
        end of warning message.

2014-04-03  Doug Evans  <dje@google.com>

        * dwarf2read.c (read_cutu_die_from_dwo): Fix assertion, at most one
        of stub_comp_unit_die, stub_comp_dir is non-NULL.

2014-04-02  Alan Modra  <amodra@gmail.com>

        * symfile-mem.c (symbol_file_add_from_memory): Add size parameter.
        Pass to bfd_elf_bfd_from_remote_memory.  Adjust all callers.
        (struct symbol_file_add_from_memory_args): Add size field.
        (find_vdso_size): New function.
        (add_vsyscall_page): Attempt to find vdso size.

2014-04-01  Doug Evans  <dje@google.com>

        * dwarf2read.c (read_cutu_die_from_dwo): Improve comment.

2014-04-01  Tristan Gingold  <gingold@adacore.com>

        * darwin-nat.c (darwin_encode_reply): Add prototype.
        (darwin_decode_exception_message): Reply to unknown inferiors.
        (darwin_decode_message): Handle message by id.  Ignore message
        to unknown inferior.
        (darwin_wait): Discard unknown messages, add debug trace.

2014-03-31  Doug Evans  <dje@google.com>

        * dwarf2read.c (read_cutu_die_from_dwo): Delete unused local
        comp_dir_string.

2014-03-31  Doug Evans  <dje@google.com>

        New option "set print symbol-loading".
        * NEWS: Mention it.
        * solib.c (solib_read_symbols): Only print symbol loading messages
        if requested.
        (solib_add): If symbol loading is in "brief" mode, notify user
        symbols are being loaded.
        (reload_shared_libraries_1): Ditto.
        * symfile.c (print_symbol_loading_off): New static global.
        (print_symbol_loading_brief): New static global.
        (print_symbol_loading_full): New static global.
        (print_symbol_loading_enums): New static global.
        (print_symbol_loading): New static global.
        (print_symbol_loading_p): New function.
        (symbol_file_add_with_addrs): Only print symbol loading messages
        if requested.
        (_initialize_symfile): Register "print symbol-loading" set/show
        command.
        * symfile.h (print_symbol_loading_p): Declare.

2014-03-30  Doug Evans  <xdje42@gmail.com>

        * infrun.c (set_last_target_status): New function.
        (handle_inferior_event): Call it.

2014-03-30  Doug Evans  <xdje42@gmail.com>

        * inferior.h (enum stop_kind): Improve comment.

2014-03-28  Joel Brobecker  <brobecker@adacore.com>

        * varobj.c (varobj_value_has_mutated): If NEW_VALUE is
        a reference, strip the reference layer before calling
        the lang_ops value_has_mutated callback.

2014-03-27  Sergio Durigan Junior  <sergiodj@redhat.com>

        Remove some globals from our parser.
        * language.c (unk_lang_parser): Add "struct parser_state"
        argument.
        * language.h (struct language_defn) <la_parser>: Likewise.
        * parse.c (expout, expout_size, expout_ptr): Remove variables.
        (initialize_expout): Add "struct parser_state" argument.
        Rewrite function to use the parser state.
        (reallocate_expout, write_exp_elt, write_exp_elt_opcode,
        write_exp_elt_sym, write_exp_elt_block, write_exp_elt_objfile,
        write_exp_elt_longcst, write_exp_elt_dblcst,
        write_exp_elt_decfloatcst, write_exp_elt_type,
        write_exp_elt_intern, write_exp_string, write_exp_string_vector,
        write_exp_bitstring, write_exp_msymbol, mark_struct_expression,
        write_dollar_variable): Likewise.
        (parse_exp_in_context_1): Use parser state.
        (insert_type_address_space): Add "struct parser_state" argument.
        Use parser state.
        (increase_expout_size): New function.
        * parser-defs.h: Forward declare "struct language_defn" and
        "struct parser_state".
        (expout, expout_size, expout_ptr): Remove extern declarations.
        (parse_gdbarch, parse_language): Rewrite macro declarations to
        accept the parser state.
        (struct parser_state): New struct.
        (initialize_expout, reallocate_expout, write_exp_elt_opcode,
        write_exp_elt_sym, write_exp_elt_longcst, write_exp_elt_dblcst,
        write_exp_elt_decfloatcst, write_exp_elt_type,
        write_exp_elt_intern, write_exp_string, write_exp_string_vector,
        write_exp_bitstring, write_exp_elt_block, write_exp_elt_objfile,
        write_exp_msymbol, write_dollar_variable,
        mark_struct_expression, insert_type_address_space): Add "struct
        parser_state" argument.
        (increase_expout_size): New function.
        * utils.c (do_clear_parser_state): New function.
        (make_cleanup_clear_parser_state): Likewise.
        * utils.h (make_cleanup_clear_parser_state): New function
        prototype.
        * aarch64-linux-tdep.c (aarch64_stap_parse_special_token):
        Update calls to write_exp* in order to pass the parser state.
        * arm-linux-tdep.c (arm_stap_parse_special_token): Likewise.
        * i386-tdep.c (i386_stap_parse_special_token_triplet): Likewise.
        (i386_stap_parse_special_token_three_arg_disp): Likewise.
        * ppc-linux-tdep.c (ppc_stap_parse_special_token): Likewise.
        * stap-probe.c (stap_parse_register_operand): Likewise.
        (stap_parse_single_operand): Likewise.
        (stap_parse_argument_1): Likewise.
        (stap_parse_argument): Use parser state.
        * stap-probe.h: Include "parser-defs.h".
        (struct stap_parse_info) <pstate>: New field.
        * c-exp.y (parse_type): Rewrite to use parser state.
        (yyparse): Redefine to c_parse_internal.
        (pstate): New global variable.
        (parse_number): Add "struct parser_state" argument.
        (write_destructor_name): Likewise.
        (type_exp): Update calls to write_exp* and similars in order to
        use parser state.
        (exp1, exp, variable, qualified_name, space_identifier,
        typename, typebase): Likewise.
        (write_destructor_name, parse_number, lex_one_token,
        classify_name, classify_inner_name, c_parse): Add "struct
        parser_state" argument.  Update function to use parser state.
        * c-lang.h: Forward declare "struct parser_state".
        (c_parse): Add "struct parser_state" argument.
        * ada-exp.y (parse_type): Rewrite macro to use parser state.
        (yyparse): Redefine macro to ada_parse_internal.
        (pstate): New variable.
        (write_int, write_object_renaming, write_var_or_type,
        write_name_assoc, write_exp_op_with_string, write_ambiguous_var,
        type_int, type_long, type_long_long, type_float, type_double,
        type_long_double, type_char, type_boolean, type_system_address):
        Add "struct parser_state" argument.
        (exp1, primary, simple_exp, relation, and_exp, and_then_exp,
        or_exp, or_else_exp, xor_exp, type_prefix, opt_type_prefix,
        var_or_type, aggregate, aggregate_component_list,
        positional_list, others, component_group,
        component_associations): Update calls to write_exp* and similar
        functions in order to use parser state.
        (ada_parse, write_var_from_sym, write_int,
        write_exp_op_with_string, write_object_renaming,
        find_primitive_type, write_selectors, write_ambiguous_var,
        write_var_or_type, write_name_assoc, type_int, type_long,
        type_long_long, type_float, type_double, type_long_double,
        type_char, type_boolean, type_system_address): Add "struct
        parser_state" argument.  Adjust function to use parser state.
        * ada-lang.c (parse): Likewise.
        * ada-lang.h: Forward declare "struct parser_state".
        (ada_parse): Add "struct parser_state" argument.
        * ada-lex.l (processInt, processReal): Likewise.  Adjust all
        calls to both functions.
        * f-exp.y (parse_type, parse_f_type): Rewrite macros to use
        parser state.
        (yyparse): Redefine macro to f_parse_internal.
        (pstate): New variable.
        (parse_number): Add "struct parser_state" argument.
        (type_exp, exp, subrange, typebase): Update calls to write_exp*
        and similars in order to use parser state.
        (parse_number): Adjust code to use parser state.
        (yylex): Likewise.
        (f_parse): New function.
        * f-lang.h: Forward declare "struct parser_state".
        (f_parse): Add "struct parser_state" argument.
        * jv-exp.y (parse_type, parse_java_type): Rewrite macros to use
        parser state.
        (yyparse): Redefine macro for java_parse_internal.
        (pstate): New variable.
        (push_expression_name, push_expression_name, insert_exp): Add
        "struct parser_state" argument.
        (type_exp, StringLiteral, Literal, PrimitiveType, IntegralType,
        FloatingPointType, exp1, PrimaryNoNewArray, FieldAccess,
        FuncStart, MethodInvocation, ArrayAccess, PostfixExpression,
        PostIncrementExpression, PostDecrementExpression,
        UnaryExpression, PreIncrementExpression, PreDecrementExpression,
        UnaryExpressionNotPlusMinus, CastExpression,
        MultiplicativeExpression, AdditiveExpression, ShiftExpression,
        RelationalExpression, EqualityExpression, AndExpression,
        ExclusiveOrExpression, InclusiveOrExpression,
        ConditionalAndExpression, ConditionalOrExpression,
        ConditionalExpression, Assignment, LeftHandSide): Update
        calls to write_exp* and similars in order to use parser state.
        (parse_number): Ajust code to use parser state.
        (yylex): Likewise.
        (java_parse): New function.
        (push_variable): Add "struct parser_state" argument.  Adjust
        code to user parser state.
        (push_fieldnames, push_qualified_expression_name,
        push_expression_name, insert_exp): Likewise.
        * jv-lang.h: Forward declare "struct parser_state".
        (java_parse): Add "struct parser_state" argument.
        * m2-exp.y (parse_type, parse_m2_type): Rewrite macros to use
        parser state.
        (yyparse): Redefine macro to m2_parse_internal.
        (pstate): New variable.
        (type_exp, exp, fblock, variable, type): Update calls to
        write_exp* and similars to use parser state.
        (yylex): Likewise.
        (m2_parse): New function.
        * m2-lang.h: Forward declare "struct parser_state".
        (m2_parse): Add "struct parser_state" argument.
        * objc-lang.c (end_msglist): Add "struct parser_state" argument.
        * objc-lang.h: Forward declare "struct parser_state".
        (end_msglist): Add "struct parser_state" argument.
        * p-exp.y (parse_type): Rewrite macro to use parser state.
        (yyparse): Redefine macro to pascal_parse_internal.
        (pstate): New variable.
        (parse_number): Add "struct parser_state" argument.
        (type_exp, exp1, exp, qualified_name, variable): Update calls to
        write_exp* and similars in order to use parser state.
        (parse_number, yylex): Adjust code to use parser state.
        (pascal_parse): New function.
        * p-lang.h: Forward declare "struct parser_state".
        (pascal_parse): Add "struct parser_state" argument.
        * go-exp.y (parse_type): Rewrite macro to use parser state.
        (yyparse): Redefine macro to go_parse_internal.
        (pstate): New variable.
        (parse_number): Add "struct parser_state" argument.
        (type_exp, exp1, exp, variable, type): Update calls to
        write_exp* and similars in order to use parser state.
        (parse_number, lex_one_token, classify_name, yylex): Adjust code
        to use parser state.
        (go_parse): Likewise.
        * go-lang.h: Forward declare "struct parser_state".
        (go_parse): Add "struct parser_state" argument.

2014-03-27  Doug Evans  <dje@google.com>

        * dwarf2read.c (read_str_index): Delete arg cu.  All callers updated.

2014-03-27  Doug Evans  <dje@google.com>

        * dwarf2read.c (init_cutu_and_read_dies_no_follow): Fix comments.
        Remove argument abbrev_section.  All callers updated.

2014-03-27  Doug Evans  <dje@google.com>

        * dwarf2read.c (struct dwarf2_cu): Improve comments for members
        addr_base, ranges_base.

2014-03-26  Keith Seitz  <keiths@redhat.com>

        * ada-tasks.c (get_tcb_types_info): Search STRUCT_DOMAIN for
        types, not VAR_DOMAIN.

2014-03-25  Sandra Loosemore  <sandra@codesourcery.com>

        * features/nios2-cpu.xml: Correct types of "gp", "fp", "ea", and
        "ra" registers.
        * features/nios2-linux.c: Regenerated.
        * features/nios2.c: Regenerated.

2014-03-25  Pedro Alves  <palves@redhat.com>

        * cli/cli-script.c (script_from_file): Force the interpreter to
        sync mode.

2014-03-24  Pierre Langlois  <pierre.langlois@embecosm.com>

        * avr-tdep.c (avr_scan_prologue): Accept push r1 instruction for
        small stack allocation.

2014-03-24  Tristan Gingold  <gingold@adacore.com>

        * darwin-nat.c (exc_server): Remove unused prototype.
        (darwin_dump_message): Correctly display data on x86_64.
        (darwin_encode_reply): Fix style.
        Add comments and fix indentation.

2014-03-24  Pierre Langlois  <pierre.langlois@embecosm.com>

        * MAINTAINERS (Write After Approval): Add "Pierre Langlois".

2014-03-22  Doug Evans  <xdje42@gmail.com>

        * infcmd.c: Whitespace fixes.
        (interrupt_command): Merge two function comments into one.

2014-03-22  Doug Evans  <xdje42@gmail.com>

        * infcmd.c (interrupt_command): Renamed from interrupt_target_command.
        All uses updated.

2014-03-22  Yao Qi  <yao@codesourcery.com>

        * remote.c (target_read_live_memory): Remove.
        (memory_xfer_live_readonly_partial): Rename it to
        remote_xfer_live_readonly_partial.  Remove argument 'object'.
        All callers updated.  Call remote_read_bytes_1
        instead of target_read_live_memory.
        * tracepoint.c (set_traceframe_number): Remove.
        (make_cleanup_restore_traceframe_number): Likewise .
        * tracepoint.h (set_traceframe_number): Remove declaration.
        (make_cleanup_restore_traceframe_number): Likewise.

2014-03-22  Yao Qi  <yao@codesourcery.com>

        * remote.c (remote_read_bytes): Move code on reading from the
        remote stub to ...
        (remote_read_bytes_1): ... here.  New function.

2014-03-22  Yao Qi  <yao@codesourcery.com>

        * ctf.c (ctf_xfer_partial): Check the return value of
        exec_read_partial_read_only, if it is not TARGET_XFER_OK,
        return TARGET_XFER_UNAVAILABLE.
        * tracefile-tfile.c (tfile_xfer_partial): Likewise.
        * target.c (target_read_live_memory): Move it to remote.c.
        (memory_xfer_live_readonly_partial): Likewise.
        (memory_xfer_partial_1): Move some code to remote_read_bytes.
        * remote.c (target_read_live_memory): Moved from target.c.
        (memory_xfer_live_readonly_partial): Likewise.
        (remote_read_bytes): Factored out from
        memory_xfer_partial_1.

2014-03-21  Daniel Gutson  <daniel.gutson@tallertechnologies.com>

        * extension.c (eval_ext_lang_from_control_command): Avoid dereferencing
        NULL pointer.

2014-03-21  Pedro Alves  <palves@redhat.com>

        * infrun.c (normal_stop): Extend comment.

2014-03-21  Hui Zhu  <hui@codesourcery.com>
            Pedro Alves  <palves@redhat.com>

        * darwin-nat.c (darwin_pid_to_exec_file): Change xmalloc to
        static buffer.
        * fbsd-nat.c (fbsd_pid_to_exec_file): Ditto.
        * linux-nat.c (linux_child_pid_to_exec_file): Ditto.
        * nbsd-nat.c (nbsd_pid_to_exec_file): Ditto.

2014-03-20  Maciej W. Rozycki  <macro@codesourcery.com>

        * mi/mi-interp.c (mi_memory_changed): Avoid using the ISO C99
        `z' formatted output modifier.

2014-03-20  Tom Tromey  <tromey@redhat.com>
            Sergio Durigan Junior  <sergiodj@redhat.com>

        * probe.c (parse_probes): Turn assert into an ordinary error.
        * break-catch-throw.c (re_set_exception_catchpoint): Ignore
        exceptions when parsing probes.  Rearrange the code for clarity.

2014-03-20  Tom Tromey  <tromey@redhat.com>

        PR gdb/14135
        * top.c (execute_command): Only dispatch events if the command
        started the target.

2014-03-20  Tom Tromey  <tromey@redhat.com>

        PR cli/15718
        * infcall.c: Include event-top.h.
        (run_inferior_call): Call async_disable_stdin if needed.

2014-03-20  Pedro Alves  <palves@redhat.com>

        * infrun.c (prepare_to_proceed): Delete.
        (thread_still_needs_step_over): New function.
        (find_thread_needs_step_over): New function.
        (proceed): If the current thread needs a step-over, set its
        steping_over_breakpoint flag.  Adjust to use
        find_thread_needs_step_over instead of prepare_to_proceed.
        (process_event_stop_test): For BPSTAT_WHAT_STOP_NOISY and
        BPSTAT_WHAT_STOP_SILENT, assume the thread stopped for a
        breakpoint.
        (switch_back_to_stepped_thread): Step over breakpoints of all
        threads not the stepping thread, before switching back to the
        stepping thread.

2014-03-20  Pedro Alves  <palves@redhat.com>

        * breakpoint.c (single_step_breakpoint_inserted_here_p): Make
        extern.
        * breakpoint.h (single_step_breakpoint_inserted_here_p): Declare.
        * infrun.c (saved_singlestep_ptid)
        (stepping_past_singlestep_breakpoint): Delete.
        (resume): Remove stepping_past_singlestep_breakpoint handling.
        (proceed): Store the prev_pc of the stepping thread too.
        (init_wait_for_inferior): Adjust.  Clear singlestep_ptid and
        singlestep_pc.
        (enum infwait_states): Delete infwait_thread_hop_state.
        (struct execution_control_state) <hit_singlestep_breakpoint>: New
        field.
        (handle_inferior_event): Adjust.
        (handle_signal_stop): Delete stepping_past_singlestep_breakpoint
        handling and the thread-hop code.  Before removing single-step
        breakpoints, check whether the thread hit a single-step breakpoint
        of another thread.  If it did, the trap is not a random signal.
        (switch_back_to_stepped_thread): If the event thread hit a
        single-step breakpoint, unblock it before switching to the
        stepping thread.  Handle the case of the stepped thread having
        advanced already.
        (keep_going): Handle the case of the current thread moving past a
        single-step breakpoint.

2014-03-20  Pedro Alves  <palves@redhat.com>

        PR breakpoints/7143
        * breakpoint.c (should_be_inserted): Don't insert breakpoints that
        are being stepped over.
        (breakpoint_address_match): Make extern.
        * breakpoint.h (breakpoint_address_match): New declaration.
        * inferior.h (stepping_past_instruction_at): New declaration.
        * infrun.c (struct step_over_info): New type.
        (step_over_info): New global.
        (set_step_over_info, clear_step_over_info)
        (stepping_past_instruction_at): New functions.
        (handle_inferior_event): Clear the step-over info when
        trap_expected is cleared.
        (resume): Remove now stale comment.
        (clear_proceed_status): Clear step-over info.
        (proceed): Adjust step-over handling to set or clear the step-over
        info instead of removing all breakpoints.
        (handle_signal_stop): When setting up a thread-hop, don't remove
        breakpoints here.
        (stop_stepping): Clear step-over info.
        (keep_going): Adjust step-over handling to set or clear step-over
        info and then always inserting breakpoints, instead of removing
        all breakpoints when stepping over one.

2014-03-20  Pedro Alves  <palves@redhat.com>

        * infrun.c (previous_inferior_ptid): Adjust comment.
        (deferred_step_ptid): Delete.
        (infrun_thread_ptid_changed, prepare_to_proceed)
        (init_wait_for_inferior): Adjust.
        (handle_signal_stop): Delete deferred_step_ptid handling.

2014-03-18  Jan Kratochvil  <jan.kratochvil@redhat.com>

        PR gdb/15358
        * defs.h (sync_quit_force_run): New declaration.
        (QUIT): Check also SYNC_QUIT_FORCE_RUN.
        * event-top.c (async_sigterm_handler): New declaration.
        (async_sigterm_token): New variable.
        (async_init_signals): Create also async_sigterm_token.
        (async_sigterm_handler): New function.
        (sync_quit_force_run): New variable.
        (handle_sigterm): Replace quit_force call by other calls.
        * utils.c (quit): Call quit_force if SYNC_QUIT_FORCE_RUN.

2014-03-18  Maciej W. Rozycki  <macro@codesourcery.com>

        * rs6000-tdep.c (rs6000_frame_cache): Correct little-endian GPR
        offset into SPE pseudo registers.

2014-03-18  Pedro Alves  <palves@redhat.com>

        PR gdb/13860
        * inferior.h (print_stop_event): Declare.
        * infrun.c (print_stop_event): New, factored out from ...
        (normal_stop): ... this.
        * mi/mi-interp.c (mi_on_normal_stop): Use print_stop_event instead
        of bpstat_print/print_stack_frame.

2014-03-17  Tom Tromey  <tromey@redhat.com>

        * ui-out.c (clear_table, ui_out_new): Clear uiout->table.id.

2014-03-17  Pierre-Marie de Rodat  <derodat@adacore.com>

        * ada-lang.c (decode_constrained_packed_array): Perform a
        minimal coercion for reference with coerce_ref instead of
        ada_coerce_ref.

2014-03-17  Tristan Gingold  <gingold@adacore.com>

        * solib-darwin.c (DYLD_VERSION_MAX): Increase value.
        (darwin_solib_create_inferior_hook): Emit a warning if version
        is unhandled.

2014-03-16  Ulrich Weigand  <uweigand@de.ibm.com>

        * python/py-value.c (get_field_flag): Cast flag_name argument to
        PyObject_GetAttrString to support Python 2.4.

2014-03-14  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * MAINTAINERS (The Official FSF-appointed GDB Maintainers)
        (Global Maintainers): Remove Jan Kratochvil.

2014-03-14  Pedro Alves  <palves@redhat.com>

        * inferior.h (terminal_ours_for_output): Rename to ...
        (child_terminal_ours_for_output): ... this.
        (terminal_save_ours): Rename to ...
        (child_terminal_save_ours): ... this.
        (terminal_ours): Rename to ...
        (child_terminal_ours): ... this.
        (terminal_inferior): Rename to ...
        (child_terminal_inferior): ... this.
        (terminal_init_inferior): Rename to ...
        (child_terminal_init_inferior): ... this.
        (terminal_init_inferior_with_pgrp): Rename to ...
        (child_terminal_init_inferior_with_pgrp): ... this.
        * inflow.c (terminal_init_inferior_with_pgrp): Rename to ...
        (child_terminal_init_with_pgrp): ... this.
        (terminal_save_ours): Rename to ...
        (child_terminal_save_ours): ... this.
        (terminal_init_inferior): Rename to ...
        (child_terminal_init): ... this.  Adjust.
        (terminal_inferior): Rename to ...
        (child_terminal_inferior): ... this.
        (terminal_ours_for_output): Rename to ...
        (child_terminal_ours_for_output): ... this.  Adjust.
        (terminal_ours): Rename to ...
        (child_terminal_ours): ... this.
        (terminal_ours_1): Rename to ...
        (child_terminal_ours_1): ... this.  Adjust.
        * linux-nat.c (linux_nat_terminal_inferior): Adjust.
        * windows-nat.c (do_initial_windows_stuff): Adjust.
        * gnu-nat.c (gnu_terminal_init_inferior): Rename to ...
        (gnu_terminal_init): ... this.  Adjust.
        (gnu_target): Adjust.
        * inf-child.c (inf_child_target): Adjust.

2014-03-13  Doug Evans  <xdje42@gmail.com>

        PR guile/16612
        * guile/scm-type.c (tyscm_copy_type_recursive): Move type to its
        new eq?-hashtab.

2014-03-13  Doug Evans  <xdje42@gmail.com>

        * value.c (record_latest_value): Call release_value_or_incref
        instead of release_value.

2014-03-13  Pedro Alves  <palves@redhat.com>

        * procfs.c (procfs_target): Don't override to_shortname,
        to_longname or to_doc.

2014-03-13  Pedro Alves  <palves@redhat.com>

        * inf-child.c (inf_child_open, inf_child_target): Don't mention
        Unix in user visible strings.

2014-03-12  Stan Shebs  <stan@codesourcery.com>

        * gdbtypes.h: Annotate comments for Doxygen, add a page
        block comment with some general info.

2014-03-12  Pedro Alves  <palves@redhat.com>

        * infcmd.c (prepare_execution_command): New function, factored out
        from several execution commands.
        (run_command_1, continue_command, step_1, jump_command)
        (signal_command, until_command, advance_command, finish_command)
        (attach_command): Use prepare_execution_command.

2014-03-12  Omair Javaid  <omair.javaid@linaro.org>

        * arm-linux-nat.c (arm_linux_get_hwbp_cap): Updated.
        (MAX_BPTS): Define.
        (MAX_WPTS): Define.
        (struct arm_linux_thread_points): Removed.
        (struct arm_linux_process_info): New.
        (DEF_VEC_P (arm_linux_thread_points_p)): Removed.
        (VEC(arm_linux_thread_points_p) *arm_threads): Removed.
        (arm_linux_find_breakpoints_by_tid): Removed.
        (struct arch_lwp_info): New.
        (arm_linux_find_process_pid): New functions.
        (arm_linux_add_process): New functions.
        (arm_linux_process_info_get): New functions.
        (arm_linux_forget_process): New function.
        (arm_linux_get_debug_reg_state): New function.
        (struct update_registers_data): New.
        (update_registers_callback): New function.
        (arm_linux_insert_hw_breakpoint1): Updated.
        (arm_linux_remove_hw_breakpoint1): Updated.
        (arm_linux_insert_hw_breakpoint): Updated.
        (arm_linux_remove_hw_breakpoint): Updated.
        (arm_linux_insert_watchpoint): Updated.
        (arm_linux_remove_watchpoint): Updated.
        (arm_linux_new_thread): Updated.
        (arm_linux_prepare_to_resume): New function.
        (arm_linux_new_fork): New function.
        (_initialize_arm_linux_nat): Updated.

2014-03-12  Pedro Alves  <palves@redhat.com>

        * Makefile.in (TARGET_FLAGS_TO_PASS): Add TESTS.

2014-03-12  Tom Tromey  <tromey@redhat.com>

        * inf-child.c (return_zero): New function.
        (inf_child_target): Set to_can_async_p, to_supports_non_stop.
        * aix-thread.c (aix_thread_inferior_created): New function.
        (aix_thread_attach): Remove.
        (init_aix_thread_ops): Don't set to_attach.
        (_initialize_aix_thread): Register inferior_created observer.
        * corelow.c (init_core_ops): Don't set to_attach or
        to_create_inferior.
        * exec.c (init_exec_ops): Don't set to_attach or
        to_create_inferior.
        * infcmd.c (run_command_1): Use find_run_target.  Make direct
        target calls.
        (attach_command): Use find_attach_target.  Make direct target
        calls.
        * record-btrace.c (init_record_btrace_ops): Don't set
        to_create_inferior.
        * record-full.c (record_full_can_async_p, record_full_is_async_p):
        Remove.
        (init_record_full_ops, init_record_full_core_ops): Update.  Don't
        set to_create_inferior.
        * target.c (complete_target_initialization): Add assertion.
        (target_create_inferior): Remove.
        (find_default_attach, find_default_create_inferior): Remove.
        (find_attach_target, find_run_target): New functions.
        (find_default_is_async_p, find_default_can_async_p)
        (target_supports_non_stop, target_attach): Remove.
        (init_dummy_target): Don't set to_create_inferior or
        to_supports_non_stop.
        * target.h (struct target_ops) <to_attach>: Add comment.  Remove
        TARGET_DEFAULT_FUNC.
        <to_create_inferior>: Add comment.
        <to_can_async_p, to_is_async_p, to_supports_non_stop>: Use
        TARGET_DEFAULT_RETURN.
        <to_can_async_p, to_supports_non_stop, to_can_run>: Add comments.
        (find_attach_target, find_run_target): Declare.
        (target_create_inferior): Remove.
        (target_has_execution_1): Update comment.
        (target_supports_non_stop): Remove.
        * target-delegates.c: Rebuild.

2014-03-12  Pedro Alves  <palves@redhat.com>

        * inf-child.h: Update comment to not mention Unix.

2014-03-12  Pedro Alves  <palves@redhat.com>

        * inf-child.c: Update top comment to not mention Unix.  Add
        generic comment describing how this target is meant to be used.
        (inf_child_post_attach, inf_child_post_startup_inferior)
        (inf_child_follow_fork, inf_child_pid_to_exec_file): Don't mention
        Unix in comment.

2014-03-12  Pedro Alves  <palves@redhat.com>

        * nto-procfs.c: Include inf-child.h.
        (procfs_ops): Delete global.
        (procfs_can_run): Delete method.
        (procfs_detach, procfs_mourn_inferior): Unpush the passed in
        target pointer instead of referencing procfs_ops.
        (procfs_prepare_to_store): Delete.
        (init_procfs_ops): Delete function.
        (procfs_target): New function, based on init_procfs_ops, but
        inherit inf_child_target.
        (_initialize_procfs): Use procfs_target.

2014-03-12  Pedro Alves  <palves@redhat.com>

        * windows-nat.c: Include inf-child.h.
        (windows_ops): Delete global.
        (windows_open, windows_prepare_to_store, windows_can_run): Delete
        methods.
        (init_windows_ops): Delete function.
        (windows_target): New function, based on init_windows_ops, but
        inherit inf_child_target.
        (_initialize_windows_nat): Use windows_target.  Install x86
        specific target methods here.

2014-03-10  Doug Evans  <xdje42@gmail.com>

        * guile/guile.c (call_initialize_gdb_module): New function.
        (initialize_guile): Replace call to scm_init_guile with call to
        scm_with_guile.

2014-03-10  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_evaluate_subexp): Add missing space before '('
        in call to TYPE_CODE macro.

2014-03-10  Jerome Guitton  <guitton@adacore.com>

        * ada-lang.c (ada_evaluate_subexp) <UNOP_IND, STRUCTOP_STRUCT>:
        Resolve tagged types to full view.

2014-03-10  Hui Zhu  <hui@codesourcery.com>

        * target.h (target_insert_breakpoint): Remove "hardware" from its
        comments.

2014-03-07  Doug Evans  <dje@google.com>

        * dwarf2read.c (read_str_index): Rename local dwo_name to objf_name.

2014-03-07  Doug Evans  <dje@google.com>

        * dwarf2read.c (read_cutu_die_from_dwo): Fix function comment.
        Remove unused local comp_dir_attr.  Assert exactly one of
        stub_comp_unit_die, stub_comp_dir is non-NULL.

2014-03-07  Joel Brobecker  <brobecker@adacore.com>

        * target.h (complete_target_initialization, add_target):
        Add comment.

2014-03-07  Pedro Alves  <palves@redhat.com>

        * go32-nat.c: Include inf-child.h.
        (go32_ops): Delete global.
        (go32_close, go32_detach, go32_prepare_to_store, go32_can_run):
        Delete methods.
        (go32_create_inferior): Push the passed in target pointer instead
        of referencing go32_ops.
        (init_go32_ops): Delete function.  Moved parts to _initialize_go32_nat.
        (go32_target): New function, based on init_go32_ops, but inherit
        inf_child_target.
        (_initialize_go32_nat): Use go32_target.  Move parts of
        init_go32_ops here.

2014-03-06  Joel Brobecker  <brobecker@adacore.com>

        * sol-thread.c: #include "symtab.h", "minsym.h" and "objfiles.h".
        (ps_pglobal_lookup): Use BMSYMBOL_VALUE_ADDRESS instead of
        SYMBOL_VALUE_ADDRESS.
        (info_cb): MSYMBOL_PRINT_NAME instead of SYMBOL_PRINT_NAME.

2014-03-06  Yao Qi  <yao@codesourcery.com>

        * breakpoint.c (get_tracepoint_by_number): Remove argument
        optional_p.  All callers updated.  Adjust comments.  Update
        output message.
        * breakpoint.h (get_tracepoint_by_number): Update declaration.

2014-03-06  Yao Qi  <yao@codesourcery.com>

        * reverse.c (goto_bookmark_command): Add local 'p'.  Emit error
        early if get_number returns zero.  Use 'p' instead of 'args'.

2014-03-06  Yao Qi  <yao@codesourcery.com>

        * cli/cli-utils.c (get_number_trailer): Add '\n' at the end of
        message.

2014-03-06  Yao Qi  <yao@codesourcery.com>

        PR breakpoints/16508
        * tracepoint.c (check_trace_running): New function.
        (trace_find_command): Move code to check_trace_running and
        call check_trace_running.
        (trace_find_pc_command): Likewise.
        (trace_find_tracepoint_command): Likewise.
        (trace_find_line_command): Likewise.
        (trace_find_range_command): Likewise.
        * tracepoint.h (check_trace_running): Likewise.
        * mi/mi-main.c (mi_cmd_trace_find): Call check_trace_running.

2014-03-06  Yao Qi  <yao@codesourcery.com>

        * target.h (struct target_ops) <to_traceframe_info>: Use
        TARGET_DEFAULT_NORETURN (tcomplain ()).
        * target-delegates.c: Regenerated.

2014-03-05  Pedro Alves  <palves@redhat.com>

        PR gdb/16575
        * dcache.c (dcache_poke_byte): Constify ptr parameter.  Return
        void.  Update comment.
        (dcache_xfer_memory): Delete.
        (dcache_read_memory_partial): New, based on the read bits of
        dcache_xfer_memory.
        (dcache_update): Add status parameter.  Use ULONGEST for len, and
        adjust.  Discard cache lines if the reason for the update was
        error.
        * dcache.h (dcache_xfer_memory): Delete declaration.
        (dcache_read_memory_partial): New declaration.
        (dcache_update): Update prototype.
        * target.c (raw_memory_xfer_partial): Update the dcache here.
        (memory_xfer_partial_1): Don't handle dcache writes here.

2014-03-05  Mike Frysinger  <vapier@gentoo.org>

        * remote-sim.c (gdbsim_load): Add const to prog.

2014-03-03  Tom Tromey  <tromey@redhat.com>

        * elfread.c (probe_key): Change to bfd_data.
        (elf_get_probes, probe_key_free, _initialize_elfread): Probes are
        now per-BFD, not per-objfile.
        * stap-probe.c (stap_probe_destroy): Update comment.
        (handle_stap_probe): Allocate on the per-BFD obstack.

2014-03-03  Tom Tromey  <tromey@redhat.com>

        * break-catch-throw.c (fetch_probe_arguments): Use bound probes.
        * breakpoint.c (create_longjmp_master_breakpoint): Use
        get_probe_address.
        (add_location_to_breakpoint, bkpt_probe_insert_location)
        (bkpt_probe_remove_location): Update.
        * breakpoint.h (struct bp_location) <probe>: Now a bound_probe.
        * elfread.c (elf_symfile_relocate_probe): Remove.
        (elf_probe_fns): Update.
        (insert_exception_resume_breakpoint): Change type of "probe"
        parameter to bound_probe.
        (check_exception_resume): Update.
        * objfiles.c (objfile_relocate1): Don't relocate probes.
        * probe.c (bound_probe_s): New typedef.
        (parse_probes): Use get_probe_address.  Set sal's objfile.
        (find_probe_by_pc): Return a bound_probe.
        (collect_probes): Return a VEC(bound_probe_s).
        (compare_probes): Update.
        (gen_ui_out_table_header_info): Change type of "probes"
        parameter.  Update.
        (info_probes_for_ops): Update.
        (get_probe_address): New function.
        (probe_safe_evaluate_at_pc): Update.
        * probe.h (struct probe_ops) <get_probe_address>: New field.
        <set_semaphore, clear_semaphore>: Add objfile parameter.
        (struct probe) <objfile>: Remove field.
        <arch>: New field.
        <address>: Update comment.
        (struct bound_probe): New.
        (find_probe_by_pc): Return a bound_probe.
        (get_probe_address): Declare.
        * solib-svr4.c (struct probe_and_action) <address>: New field.
        (hash_probe_and_action, equal_probe_and_action): Update.
        (register_solib_event_probe): Add address parameter.
        (solib_event_probe_at): Update.
        (svr4_create_probe_breakpoints): Add objfile parameter.  Use
        get_probe_address.
        * stap-probe.c (struct stap_probe) <sem_addr>: Update comment.
        (stap_get_probe_address): New function.
        (stap_can_evaluate_probe_arguments, compute_probe_arg)
        (compile_probe_arg): Update.
        (stap_set_semaphore, stap_clear_semaphore): Compute semaphore's
        address.
        (handle_stap_probe): Don't relocate the probe.
        (stap_relocate): Remove.
        (stap_gen_info_probes_table_values): Update.
        (stap_probe_ops): Remove stap_relocate.
        * symfile-debug.c (debug_sym_relocate_probe): Remove.
        (debug_sym_probe_fns): Update.
        * symfile.h (struct sym_probe_fns) <sym_relocate_probe>: Remove.
        * symtab.c (init_sal): Use memset.
        * symtab.h (struct symtab_and_line) <objfile>: New field.
        * tracepoint.c (start_tracing, stop_tracing): Update.

2014-03-03  Tom Tromey  <tromey@redhat.com>

        * probe.h (parse_probes, find_probe_by_pc)
        (find_probes_in_objfile): Fix comments.

2014-03-02  Doug Evans  <xdje42@gmail.com>

        * infrun.c (handle_signal_stop): Replace test for
        TARGET_WAITKIND_STOPPED with an assert.

2014-03-02  Doug Evans  <xdje42@gmail.com>

        * guile/scm-objfile.c (ofscm_mark_objfile_smob): Fix typo in comment.

2014-03-02  Doug Evans  <xdje42@gmail.com>

        * guile/lib/gdb/printing.scm (append-pretty-printer!): Fix thinko.

2014-03-01  Mark Kettenis  <kettenis@gnu.org>

        * obsd-nat.c: Include "gdb_wait.h" instead of <sys/wait.h>.

2014-03-01  Mark Kettenis  <kettenis@gnu.org>

        * i386obsd-nat.c: Include "obsd-nat.h".
        (_initialize_i386obsd_nat): Call obsd_add_target instead of
        add_target.
        * config/i386/obsd.mh (NATDEPFILES): Add obsd-nat.o.

2014-03-01  Mark Kettenis  <kettenis@gnu.org>

        * i386obsd-nat.c (i386obsd_supply_pcb): Cast 'sf' to 'gdb_byte *'.

2014-03-01  Mark Kettenis  <kettenis@gnu.org>

        * mips64obsd-nat.c: Include "obsd-nath".
        (_initialize_mips64obsd_nat): Call obsd_add_target instead of
        add_target
        * config/mips/obsd64.mh (NATDEPFILES): Add obsd-nat.o.

2014-03-01  Mark Kettenis  <kettenis@gnu.org>

        * amd64obsd-nat.c: Include "obsd-nat,h.
        (_initialize_amd64obsd_nat): Call obsd_add_target instead of
        add_target.
        * config/i386/obsd64.mh (NATDEPFILES): Add obsd-nat.o.

2014-02-28  Siva Chandra Reddy  <sivachandra@google.com>

        * valops.c (find_oload_champ): Remove unneccesary argument METHOD.
        (find_overload_match): Update call to find_oload_champ.
        (find_oload_champ_namespace_loop): Likewise

2014-02-28  Mark Kettenis  <kettenis@gnu.org>

        * Makefile.in (ALLDEPFILES): Add sparc64obsd-nat.c.

        * configure.host (sparc64-*-openbsd*): Set gdb_host to obsd64.
        * config/sparc/obsd64.mh: New file.
        * sparc64obsd-nat.c: New file.

        * obsd-nat.h: New file.
        * obsd-nat.c: New file.
        * Makefile.in (HFILES_NO_SRCDIR): Add obsd-nat.h.
        (ALLDEPFILES): Add obsd-nat.c.

2014-02-28  Tom Tromey  <tromey@redhat.com>

        * cli-out.c (cli_ui_out_impl): Now const.  Remove comment.
        * cli-out.h (cli_ui_out_impl): Now const.
        * mi/mi-out.c (mi_ui_out_impl): Now const.  Remove comment.
        * ui-out.c (struct ui_out) <impl>: Now const.
        (default_ui_out_impl): Now const.
        (ui_out_new): Make 'impl' parameter const.
        * ui-out.h (ui_out_new): Update.

2014-02-27  Mark Kettenis  <kettenis@gnu.org>

        * solib-svr4.c (svr4_read_so_list): Initialize first_l_name to 0.

2014-02-27  Mark Kettenis  <kettenis@gnu.org>

        * sparc-nat.c (sparc_xfer_wcookie): Always use process ID.

2014-02-27  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Additional PR 8882 fix.
        * solib-svr4.c (svr4_read_so_list): Change first to first_l_name.

2014-02-27  Pedro Alves  <palves@redhat.com>

        * nat/linux-waitpid.c (my_waitpid): Only block signals if WNOHANG
        isn't set.

2014-02-27  Pedro Alves  <palves@redhat.com>

        PR 12702
        * linux-nat.c (status_to_str): Moved to nat/linux-waitpid.c.
        * nat/linux-waitpid.c: Include string.h.
        (status_to_str): Moved here and made extern.
        * nat/linux-waitpid.h (status_to_str): New declaration.

2014-02-27  Hui Zhu  <hui@codesourcery.com>

        PR 12702
        * infrun.c (ptid_match): Move ...
        * common/ptid.c (ptid_match): ... here.
        * inferior.h (ptid_match): Move ...
        * common/ptid.h (ptid_match): ... here.

2014-02-27  Mark Kettenis  <kettenis@gnu.org>

        * mips64obsd-tdep.c (mips64obsd_init_abi): Call obsd_init_abi.
        * configure.tgt (mips64*-*-openbsd*): Add obsd-tdep.c to
        gdb_target_obs.

2014-02-27  Mark Kettenis  <kettenis@gnu.org>

        * obsd-tdep.c (obsd_auxv_parse): New function.
        (obsd_init_abi): Set auxv_parse.

        * gdbarch.sh (auxv_parse): New.
        * gdbarch.h: Regenerated.
        * gdbarch.c: Regenerated.
        * auxv.c (target_auxv_parse): Call gdbarch_parse_auxv if provided.

2014-02-26  Ludovic Courtès  <ludo@gnu.org>

        * guile/scm-value.c (gdbscm_history_append_x): New function.
        (value_functions): Add it.

2014-02-27  Joel Brobecker  <brobecker@adacore.com>

        * dwarf2read.c (attr_value_as_address): New function.
        (dwarf2_find_base_address, read_call_site_scope): Use
        attr_value_as_address in place of DW_ADDR.
        (dwarf2_get_pc_bounds): Use attr_value_as_address to get
        the low and high addresses.  Slight rework of the handling
        of the high pc being a constant form, and limit it to
        DWARF verson 4 or higher.
        (dwarf2_record_block_ranges): Likewise.
        (read_partial_die): Likewise.
        (new_symbol_full): Use attr_value_as_address in place of DW_ADDR.

2014-02-26  Tom Tromey  <tromey@redhat.com>

        * exec.c (exec_file_attach): Hold a reference to exec_bfd.

2014-02-26  Tom Tromey  <tromey@redhat.com>

        * elfread.c (elf_read_minimal_symbols): Return early if
        minimal symbols have already been read.  Add "ei" parameter.
        (elf_symfile_read): Call elf_read_minimal_symbols earlier.
        * minsyms.c (prim_record_minimal_symbol_full): Update.
        * objfiles.h (struct objstats) <n_minsyms>: Move...
        (struct objfile_per_bfd_storage) <n_minsyms>: ... here.
        * symmisc.c (print_objfile_statistics): Update.

2014-02-26  Tom Tromey  <tromey@redhat.com>

        * elfread.c (elf_read_minimal_symbols): New function, from
        elf_symfile_read.
        (elf_symfile_read): Call it.

2014-02-26  Tom Tromey  <tromey@redhat.com>

        * minsyms.c (lookup_minimal_symbol, iterate_over_minimal_symbols)
        (lookup_minimal_symbol_text, lookup_minimal_symbol_by_pc_name)
        (lookup_minimal_symbol_solib_trampoline)
        (lookup_minimal_symbol_by_pc_section_1)
        (lookup_minimal_symbol_and_objfile): Update.
        (prim_record_minimal_symbol_full): Use the per-BFD obstack.
        Don't allocate a minimal symbol if minsyms have already been read.
        (build_minimal_symbol_hash_tables): Update.
        (install_minimal_symbols): Do nothing if minsyms already read.
        Use the per-BFD obstack.
        (terminate_minimal_symbol_table): Use the per-BFD obstack.
        * objfiles.c (allocate_objfile): Call
        terminate_minimal_symbol_table later.
        (have_minimal_symbols): Update.
        * objfiles.h (struct objfile_per_bfd_storage) <msymbols,
        minimal_symbol_count, msymbol_hash, msymbol_demangled_hash>:
        Move from struct objfile.
        <minsyms_read>: New field.
        (struct objfile) <msymbols, minimal_symbol_count,
        msymbol_hash, msymbol_demangled_hash>: Move.
        (ALL_OBJFILE_MSYMBOLS): Update.
        * symfile.c (read_symbols): Set minsyms_read.
        (reread_symbols): Update.
        * symmisc.c (dump_objfile, dump_msymbols): Update.

2014-02-26  Tom Tromey  <tromey@redhat.com>

        * minsyms.c (msymbols_sort): Remove.
        * minsyms.h (msymbols_sort): Remove.
        * objfiles.c (objfile_relocate1): Don't relocate minsyms.
        * symtab.h (MSYMBOL_VALUE_ADDRESS): Use objfile offsets.
        * elfread.c (elf_symtab_read): Don't add section offsets.
        * xcoffread.c (record_minimal_symbol): Don't add section offset
        to minimal symbol address.
        * somread.c (text_offset, data_offset): Remove.
        (som_symtab_read): Don't add section offsets to minimal symbol
        addresses.
        * coff-pe-read.c (add_pe_forwarded_sym, read_pe_exported_syms):
        Don't add section offsets to minimal symbols.
        * coffread.c (coff_symtab_read): Don't add section offsets
        to minimal symbol addresses.
        * machoread.c (macho_symtab_add_minsym): Don't add section offset
        to minimal symbol addresses.
        * mipsread.c (read_alphacoff_dynamic_symtab): Don't add
        section offset to minimal symbol addresses.
        * mdebugread.c (parse_partial_symbols): Don't add section
        offset to minimal symbol addresses.
        * dbxread.c (read_dbx_dynamic_symtab): Don't add section
        offset to minimal symbol addresses.

2014-02-26  Tom Tromey  <tromey@redhat.com>

        * ada-lang.c (ada_main_name): Update.
        (ada_add_standard_exceptions): Update.
        * ada-tasks.c (ada_tasks_inferior_data_sniffer): Update.
        * aix-thread.c (pdc_symbol_addrs, pd_enable): Update.
        * arm-tdep.c (skip_prologue_function, arm_skip_stub): Update.
        * auxv.c (ld_so_xfer_auxv): Update.
        * avr-tdep.c (avr_scan_prologue): Update.
        * ax-gdb.c (gen_var_ref): Update.
        * blockframe.c (get_pc_function_start)
        (find_pc_partial_function_gnu_ifunc): Update.
        * breakpoint.c (create_overlay_event_breakpoint)
        (create_longjmp_master_breakpoint)
        (create_std_terminate_master_breakpoint)
        (create_exception_master_breakpoint): Update.
        * bsd-uthread.c (bsd_uthread_lookup_address): Update.
        * c-valprint.c (c_val_print): Update.
        * coff-pe-read.c (add_pe_forwarded_sym): Update.
        * common/agent.c (agent_look_up_symbols): Update.
        * dbxread.c (find_stab_function_addr, end_psymtab): Update.
        * dwarf2loc.c (call_site_to_target_addr): Update.
        * dwarf2read.c (dw2_find_pc_sect_symtab): Update.
        * elfread.c (elf_gnu_ifunc_record_cache)
        (elf_gnu_ifunc_resolve_by_got): Update.
        * findvar.c (default_read_var_value): Update.
        * frame.c (inside_main_func): Update.
        * frv-tdep.c (frv_frame_this_id): Update.
        * glibc-tdep.c (glibc_skip_solib_resolver): Update.
        * gnu-v3-abi.c (gnuv3_get_typeid, gnuv3_skip_trampoline):
        Update.
        * hppa-hpux-tdep.c (hppa64_hpux_search_dummy_call_sequence)
        (hppa_hpux_find_dummy_bpaddr): Update.
        * hppa-tdep.c (hppa_symbol_address): Update.
        * infcmd.c (until_next_command): Update.
        * jit.c (jit_read_descriptor, jit_breakpoint_re_set_internal):
        Update.
        * linespec.c (minsym_found, add_minsym): Update.
        * linux-nat.c (get_signo): Update.
        * linux-thread-db.c (inferior_has_bug): Update.
        * m32c-tdep.c (m32c_return_value)
        (m32c_m16c_address_to_pointer): Update.
        * m32r-tdep.c (m32r_frame_this_id): Update.
        * m68hc11-tdep.c (m68hc11_get_register_info): Update.
        * machoread.c (macho_resolve_oso_sym_with_minsym): Update.
        * maint.c (maintenance_translate_address): Update.
        * minsyms.c (lookup_minimal_symbol_by_pc_name): Update.
        (frob_address): New function.
        (lookup_minimal_symbol_by_pc_section_1): Use raw addresses,
        frob_address.  Rename parameter to "pc_in".
        (compare_minimal_symbols, compact_minimal_symbols): Use raw
        addresses.
        (find_solib_trampoline_target, minimal_symbol_upper_bound):
        Update.
        * mips-linux-tdep.c (mips_linux_skip_resolver): Update.
        * mips-tdep.c (mips_skip_pic_trampoline_code): Update.
        * objc-lang.c (find_objc_msgsend): Update.
        * objfiles.c (objfile_relocate1): Update.
        * obsd-tdep.c (obsd_skip_solib_resolver): Update.
        * p-valprint.c (pascal_val_print): Update.
        * parse.c (write_exp_msymbol): Update.
        * ppc-linux-tdep.c (ppc_linux_spe_context_lookup)
        (ppc_elfv2_skip_entrypoint): Update.
        * ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update.
        * printcmd.c (build_address_symbolic, msym_info)
        (address_info): Update.
        * proc-service.c (ps_pglobal_lookup): Update.
        * psymtab.c (find_pc_sect_psymtab_closer)
        (find_pc_sect_psymtab, find_pc_sect_symtab_from_partial):
        Change msymbol parameter to bound_minimal_symbol.
        * ravenscar-thread.c (get_running_thread_id): Update.
        * remote.c (remote_check_symbols): Update.
        * sh64-tdep.c (sh64_elf_make_msymbol_special): Use raw
        address.
        * sol2-tdep.c (sol2_skip_solib_resolver): Update.
        * solib-dsbt.c (lm_base): Update.
        * solib-frv.c (lm_base, main_got): Update.
        * solib-irix.c (locate_base): Update.
        * solib-som.c (som_solib_create_inferior_hook)
        (link_map_start): Update.
        * solib-spu.c (spu_enable_break, ocl_enable_break): Update.
        * solib-svr4.c (elf_locate_base, enable_break): Update.
        * spu-tdep.c (spu_get_overlay_table, spu_catch_start)
        (flush_ea_cache): Update.
        * stabsread.c (define_symbol, scan_file_globals): Update.
        * stack.c (find_frame_funname): Update.
        * symfile-debug.c (debug_qf_expand_symtabs_matching)
        (debug_qf_find_pc_sect_symtab): Update.
        * symfile.c (simple_read_overlay_table)
        (simple_overlay_update): Update.
        * symfile.h (struct quick_symbol_functions)
        <find_pc_sect_symtab>: Change type of msymbol to
        bound_minimal_symbol.
        * symmisc.c (dump_msymbols): Update.
        * symtab.c (find_pc_sect_symtab_via_partial)
        (find_pc_sect_psymtab, find_pc_sect_line, skip_prologue_sal)
        (search_symbols, print_msymbol_info): Update.
        * symtab.h (MSYMBOL_VALUE_RAW_ADDRESS): New macro.
        (MSYMBOL_VALUE_ADDRESS): Redefine.
        (BMSYMBOL_VALUE_ADDRESS): New macro.
        * tracepoint.c (scope_info): Update.
        * tui/tui-disasm.c (tui_find_disassembly_address)
        (tui_get_begin_asm_address): Update.
        * valops.c (find_function_in_inferior): Update.
        * value.c (value_static_field, value_fn_field): Update.

2014-02-26  Tom Tromey  <tromey@redhat.com>

        * ada-lang.c (ada_update_initial_language): Update.
        (ada_main_name, ada_has_this_exception_support): Update.
        * ada-tasks.c (ada_tasks_inferior_data_sniffer): Update.
        * aix-thread.c (pdc_symbol_addrs, pd_enable): Update.
        * arm-tdep.c (arm_skip_stub): Update.
        * auxv.c (ld_so_xfer_auxv): Update.
        * avr-tdep.c (avr_scan_prologue): Update.
        * ax-gdb.c (gen_var_ref): Update.
        * breakpoint.c (struct breakpoint_objfile_data)
        <overlay_msym, longjmp_msym, terminate_msym, exception_msym>: Change
        type to bound_minimal_symbol.
        (create_overlay_event_breakpoint)
        (create_longjmp_master_breakpoint)
        (create_std_terminate_master_breakpoint)
        (create_exception_master_breakpoint): Update.
        * bsd-uthread.c (bsd_uthread_lookup_address): Update.
        * c-exp.y (classify_name): Update.
        * coffread.c (coff_symfile_read): Update.
        * common/agent.c (agent_look_up_symbols): Update.
        * d-lang.c (d_main_name): Update.
        * dbxread.c (find_stab_function_addr, end_psymtab): Update.
        * dec-thread.c (enable_dec_thread): Update.
        * dwarf2loc.c (call_site_to_target_addr): Update.
        * elfread.c (elf_gnu_ifunc_resolve_by_got): Update.
        * eval.c (evaluate_subexp_standard): Update.
        * findvar.c (struct minsym_lookup_data) <result>: Change type
        to bound_minimal_symbol.
        <objfile>: Remove.
        (minsym_lookup_iterator_cb, default_read_var_value): Update.
        * frame.c (inside_main_func): Update.
        * frv-tdep.c (frv_frame_this_id): Update.
        * gcore.c (call_target_sbrk): Update.
        * glibc-tdep.c (glibc_skip_solib_resolver): Update.
        * gnu-v3-abi.c (gnuv3_get_typeid, gnuv3_skip_trampoline):
        Update.
        * go-lang.c (go_main_name): Update.
        * hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code)
        (hppa_hpux_find_import_stub_for_addr): Update.
        * hppa-tdep.c (hppa_extract_17, hppa_lookup_stub_minimal_symbol):
        Update.  Change return type.
        * hppa-tdep.h (hppa_lookup_stub_minimal_symbol): Change return
        type.
        * jit.c (jit_breakpoint_re_set_internal): Update.
        * linux-fork.c (inferior_call_waitpid, checkpoint_command):
        Update.
        * linux-nat.c (get_signo): Update.
        * linux-thread-db.c (inferior_has_bug): Update
        * m32c-tdep.c (m32c_return_value)
        (m32c_m16c_address_to_pointer): Update.
        * m32r-tdep.c (m32r_frame_this_id): Update.
        * m68hc11-tdep.c (m68hc11_get_register_info): Update.
        * machoread.c (macho_resolve_oso_sym_with_minsym): Update.
        * minsyms.c (lookup_minimal_symbol_internal): Rename to
        lookup_minimal_symbol.  Change return type.
        (lookup_minimal_symbol): Remove.
        (lookup_bound_minimal_symbol): Update.
        (lookup_minimal_symbol_text): Change return type.
        (lookup_minimal_symbol_solib_trampoline): Change return type.
        * minsyms.h (lookup_minimal_symbol, lookup_minimal_symbol_text)
        (lookup_minimal_symbol_solib_trampoline): Change return type.
        * mips-linux-tdep.c (mips_linux_skip_resolver): Update.
        * objc-lang.c (lookup_objc_class, lookup_child_selector)
        (value_nsstring, find_imps): Update.
        * obsd-tdep.c (obsd_skip_solib_resolver): Update.
        * p-lang.c (pascal_main_name): Update.
        * ppc-linux-tdep.c (ppc_linux_spe_context_lookup): Update.
        * ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update.
        * proc-service.c (ps_pglobal_lookup): Update.
        * ravenscar-thread.c (get_running_thread_msymbol): Change
        return type.
        (has_ravenscar_runtime, get_running_thread_id): Update.
        * remote.c (remote_check_symbols): Update.
        * sol-thread.c (ps_pglobal_lookup): Update.
        * sol2-tdep.c (sol2_skip_solib_resolver): Update.
        * solib-dsbt.c (lm_base): Update.
        * solib-frv.c (lm_base, frv_relocate_section_addresses):
        Update.
        * solib-irix.c (locate_base): Update.
        * solib-som.c (som_solib_create_inferior_hook)
        (som_solib_desire_dynamic_linker_symbols, link_map_start):
        Update.
        * solib-spu.c (spu_enable_break): Update.
        * solib-svr4.c (elf_locate_base, enable_break): Update.
        * spu-tdep.c (spu_get_overlay_table, spu_catch_start)
        (flush_ea_cache): Update.
        * stabsread.c (define_symbol): Update.
        * symfile.c (simple_read_overlay_table): Update.
        * symtab.c (find_pc_sect_line): Update.
        * tracepoint.c (scope_info): Update.
        * tui-disasm.c (tui_get_begin_asm_address): Update.
        * value.c (value_static_field): Update.

2014-02-26  Tom Tromey  <tromey@redhat.com>

        * minsyms.c (prim_record_minimal_symbol_full): Use
        SET_MSYMBOL_VALUE_ADDRESS.
        * objfiles.c (objfile_relocate1): Use SET_MSYMBOL_VALUE_ADDRESS.
        * sh64-tdep.c (sh64_elf_make_msymbol_special): Use
        SET_MSYMBOL_VALUE_ADDRESS.
        * symtab.h (MSYMBOL_VALUE_ADDRESS): Expand to an rvalue.
        (SET_MSYMBOL_VALUE_ADDRESS): New macro.

2014-02-26  Tom Tromey  <tromey@redhat.com>

        * symtab.h (struct minimal_symbol) <mginfo>: Rename from ginfo.
        (MSYMBOL_VALUE, MSYMBOL_VALUE_ADDRESS, MSYMBOL_VALUE_BYTES)
        (MSYMBOL_BLOCK_VALUE, MSYMBOL_VALUE_CHAIN, MSYMBOL_LANGUAGE)
        (MSYMBOL_SECTION, MSYMBOL_OBJ_SECTION, MSYMBOL_NATURAL_NAME)
        (MSYMBOL_LINKAGE_NAME, MSYMBOL_PRINT_NAME, MSYMBOL_DEMANGLED_NAME)
        (MSYMBOL_SET_LANGUAGE, MSYMBOL_SEARCH_NAME)
        (MSYMBOL_MATCHES_SEARCH_NAME, MSYMBOL_SET_NAMES): New macros.
        * ada-lang.c (ada_main_name): Update.
        (ada_lookup_simple_minsym): Update.
        (ada_make_symbol_completion_list): Update.
        (ada_add_standard_exceptions): Update.
        * ada-tasks.c (read_atcb, ada_tasks_inferior_data_sniffer): Update.
        * aix-thread.c (pdc_symbol_addrs, pd_enable): Update.
        * amd64-windows-tdep.c (amd64_skip_main_prologue): Update.
        * arm-tdep.c (skip_prologue_function): Update.
        (arm_skip_stack_protector, arm_skip_stub): Update.
        * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
        (arm_wince_skip_main_prologue): Update.
        * auxv.c (ld_so_xfer_auxv): Update.
        * avr-tdep.c (avr_scan_prologue): Update.
        * ax-gdb.c (gen_var_ref): Update.
        * block.c (call_site_for_pc): Update.
        * blockframe.c (get_pc_function_start): Update.
        (find_pc_partial_function_gnu_ifunc): Update.
        * breakpoint.c (create_overlay_event_breakpoint): Update.
        (create_longjmp_master_breakpoint): Update.
        (create_std_terminate_master_breakpoint): Update.
        (create_exception_master_breakpoint): Update.
        (resolve_sal_pc): Update.
        * bsd-uthread.c (bsd_uthread_lookup_address): Update.
        * btrace.c (ftrace_print_function_name, ftrace_function_switched):
        Update.
        * c-valprint.c (c_val_print): Update.
        * coff-pe-read.c (add_pe_forwarded_sym): Update.
        * coffread.c (coff_symfile_read): Update.
        * common/agent.c (agent_look_up_symbols): Update.
        * dbxread.c (find_stab_function_addr): Update.
        (end_psymtab): Update.
        * dwarf2loc.c (call_site_to_target_addr): Update.
        (func_verify_no_selftailcall): Update.
        (tailcall_dump): Update.
        (call_site_find_chain_1): Update.
        (dwarf_expr_reg_to_entry_parameter): Update.
        * elfread.c (elf_gnu_ifunc_record_cache): Update.
        (elf_gnu_ifunc_resolve_by_got): Update.
        * f-valprint.c (info_common_command): Update.
        * findvar.c (read_var_value): Update.
        * frame.c (get_prev_frame_1): Update.
        (inside_main_func): Update.
        * frv-tdep.c (frv_skip_main_prologue): Update.
        (frv_frame_this_id): Update.
        * glibc-tdep.c (glibc_skip_solib_resolver): Update.
        * gnu-v2-abi.c (gnuv2_value_rtti_type): Update.
        * gnu-v3-abi.c (gnuv3_rtti_type): Update.
        (gnuv3_skip_trampoline): Update.
        * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline): Update.
        (hppa64_hpux_in_solib_call_trampoline): Update.
        (hppa_hpux_skip_trampoline_code): Update.
        (hppa64_hpux_search_dummy_call_sequence): Update.
        (hppa_hpux_find_import_stub_for_addr): Update.
        (hppa_hpux_find_dummy_bpaddr): Update.
        * hppa-tdep.c (hppa_symbol_address)
        (hppa_lookup_stub_minimal_symbol): Update.
        * i386-tdep.c (i386_skip_main_prologue): Update.
        (i386_pe_skip_trampoline_code): Update.
        * ia64-tdep.c (ia64_convert_from_func_ptr_addr): Update.
        * infcall.c (get_function_name): Update.
        * infcmd.c (until_next_command): Update.
        * jit.c (jit_breakpoint_re_set_internal): Update.
        (jit_inferior_init): Update.
        * linespec.c (minsym_found): Update.
        (add_minsym): Update.
        * linux-fork.c (info_checkpoints_command): Update.
        * linux-nat.c (get_signo): Update.
        * linux-thread-db.c (inferior_has_bug): Update.
        * m32c-tdep.c (m32c_return_value): Update.
        (m32c_m16c_address_to_pointer): Update.
        (m32c_m16c_pointer_to_address): Update.
        * m32r-tdep.c (m32r_frame_this_id): Update.
        * m68hc11-tdep.c (m68hc11_get_register_info): Update.
        * machoread.c (macho_resolve_oso_sym_with_minsym): Update.
        * maint.c (maintenance_translate_address): Update.
        * minsyms.c (add_minsym_to_hash_table): Update.
        (add_minsym_to_demangled_hash_table): Update.
        (msymbol_objfile): Update.
        (lookup_minimal_symbol): Update.
        (iterate_over_minimal_symbols): Update.
        (lookup_minimal_symbol_text): Update.
        (lookup_minimal_symbol_by_pc_name): Update.
        (lookup_minimal_symbol_solib_trampoline): Update.
        (lookup_minimal_symbol_by_pc_section_1): Update.
        (lookup_minimal_symbol_and_objfile): Update.
        (prim_record_minimal_symbol_full): Update.
        (compare_minimal_symbols): Update.
        (compact_minimal_symbols): Update.
        (build_minimal_symbol_hash_tables): Update.
        (install_minimal_symbols): Update.
        (terminate_minimal_symbol_table): Update.
        (find_solib_trampoline_target): Update.
        (minimal_symbol_upper_bound): Update.
        * mips-linux-tdep.c (mips_linux_skip_resolver): Update.
        * mips-tdep.c (mips_stub_frame_sniffer): Update.
        (mips_skip_pic_trampoline_code): Update.
        * msp430-tdep.c (msp430_skip_trampoline_code): Update.
        * objc-lang.c (selectors_info): Update.
        (classes_info): Update.
        (find_methods): Update.
        (find_imps): Update.
        (find_objc_msgsend): Update.
        * objfiles.c (objfile_relocate1): Update.
        * objfiles.h (ALL_OBJFILE_MSYMBOLS): Update.
        * obsd-tdep.c (obsd_skip_solib_resolver): Update.
        * p-valprint.c (pascal_val_print): Update.
        * parse.c (write_exp_msymbol): Update.
        * ppc-linux-tdep.c (powerpc_linux_in_dynsym_resolve_code)
        (ppc_linux_spe_context_lookup, ppc_elfv2_skip_entrypoint): Update.
        * ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update.
        * printcmd.c (build_address_symbolic): Update.
        (sym_info): Update.
        (address_info): Update.
        * proc-service.c (ps_pglobal_lookup): Update.
        * psymtab.c (find_pc_sect_psymtab_closer): Update.
        (find_pc_sect_psymtab): Update.
        * python/py-framefilter.c (py_print_frame): Update.
        * ravenscar-thread.c (get_running_thread_id): Update.
        * record-btrace.c (btrace_call_history, btrace_get_bfun_name):
        Update.
        * remote.c (remote_check_symbols): Update.
        * rs6000-tdep.c (rs6000_skip_main_prologue): Update.
        (rs6000_skip_trampoline_code): Update.
        * sh64-tdep.c (sh64_elf_make_msymbol_special): Update.
        * sol2-tdep.c (sol2_skip_solib_resolver): Update.
        * solib-dsbt.c (lm_base): Update.
        * solib-frv.c (lm_base): Update.
        (main_got): Update.
        * solib-irix.c (locate_base): Update.
        * solib-som.c (som_solib_create_inferior_hook): Update.
        (som_solib_desire_dynamic_linker_symbols): Update.
        (link_map_start): Update.
        * solib-spu.c (spu_enable_break): Update.
        (ocl_enable_break): Update.
        * solib-svr4.c (elf_locate_base): Update.
        (enable_break): Update.
        * spu-tdep.c (spu_get_overlay_table): Update.
        (spu_catch_start): Update.
        (flush_ea_cache): Update.
        * stabsread.c (define_symbol): Update.
        (scan_file_globals): Update.
        * stack.c (find_frame_funname): Update.
        (frame_info): Update.
        * symfile.c (simple_read_overlay_table): Update.
        (simple_overlay_update): Update.
        * symmisc.c (dump_msymbols): Update.
        * symtab.c (fixup_section): Update.
        (find_pc_sect_line): Update.
        (skip_prologue_sal): Update.
        (search_symbols): Update.
        (print_msymbol_info): Update.
        (rbreak_command): Update.
        (MCOMPLETION_LIST_ADD_SYMBOL): New macro.
        (completion_list_objc_symbol): Update.
        (default_make_symbol_completion_list_break_on): Update.
        * tracepoint.c (scope_info): Update.
        * tui/tui-disasm.c (tui_find_disassembly_address): Update.
        (tui_get_begin_asm_address): Update.
        * valops.c (find_function_in_inferior): Update.
        * value.c (value_static_field): Update.
        (value_fn_field): Update.

2014-02-26  Tom Tromey  <tromey@redhat.com>

        * blockframe.c (find_pc_partial_function_gnu_ifunc): Use
        bound minimal symbols.  Move code that knows about minsym
        table layout...
        * minsyms.c (minimal_symbol_upper_bound): ... here.  New
        function.
        * minsyms.h (minimal_symbol_upper_bound): Declare.
        * objc-lang.c (find_objc_msgsend): Use bound minimal symbols,
        minimal_symbol_upper_bound.

2014-02-27  Joel Brobecker  <brobecker@adacore.com>

        * python/lib/gdb/printing.py (RegexpCollectionPrettyPrinter):
        Use the type's name if its basic type does not have a tag.

2014-02-27  Joel Brobecker  <brobecker@adacore.com>

        * dwarf2read.c (read_subrange_type): Add comment.

2014-02-27  Joel Brobecker  <brobecker@adacore.com>

        * dwarf2read.c (update_enumeration_type_from_children): New
        function, mostly extracted from process_structure_scope.
        (read_enumeration_type): Call update_enumeration_type_from_children.
        (process_enumeration_scope): Do not set THIS_TYPE's flag_unsigned
        and flag_flag_enum fields.

2014-02-26  Pedro Alves  <palves@redhat.com>

        * bsd-uthread.c (bsd_uthread_xfer_partial): Delete function.
        (bsd_uthread_target): Don't install bsd_uthread_xfer_partial as
        to_xfer_partial method.

2014-02-26  Pedro Alves  <palves@redhat.com>

        * target.c (complete_target_initialization): Don't install
        default_xfer_partial as to_xfer_partial hook.
        (nomemory): Delete.
        (update_current_target): Don't INHERIT nor de_fault
        deprecated_xfer_memory.  Delete de_fault macro.
        (default_xfer_partial, deprecated_debug_xfer_memory): Delete.
        (setup_target_debug): Don't install a deprecated_xfer_memory hook.
        * target.h (struct target_ops) <deprecated_xfer_memory>: Delete
        field.

2014-02-26  Pedro Alves  <palves@redhat.com>

        * go32-nat.c (my_write_child): New function.
        (go32_xfer_memory): Rewrite as to_xfer_partial helper.
        (go32_xfer_partial): New function.
        (init_go32_ops): Don't install a deprecated_xfer_memory hook.
        Instead install a to_xfer_partial hook.

2014-02-26  Pedro Alves  <palves@redhat.com>

        * nto-procfs.c (procfs_xfer_memory): Adjust interface as a
        to_xfer_partial helper.  Rewrite.
        (procfs_xfer_partial): New function.
        (init_procfs_ops): Don't install a deprecated_xfer_memory hook.
        Install a to_xfer_partial hook.

2014-02-26  Pedro Alves  <palves@redhat.com>

        * remote-m32r-sdi.c (send_data): Constify 'buf' parameter.
        (m32r_xfer_memory): Adjust as a to_xfer_partial helper.
        (m32r_xfer_partial): New function.
        (init_m32r_ops): Don't install a deprecated_xfer_memory hook.
        Install a to_xfer_partial hook.

2014-02-26  Pedro Alves  <palves@redhat.com>

        * remote-mips.c (mips_xfer_memory): Adjust as to_xfer_partial
        helper.
        (mips_xfer_partial): New function.
        (_initialize_remote_mips): Don't install a deprecated_xfer_memory
        hook.  Install a to_xfer_partial hook.

2014-02-26  Joel Brobecker  <brobecker@adacore.com>

        * gdbtypes.h (create_array_type_with_stride): Add declaration.
        * gdbtypes.c (create_array_type_with_stride): New function,
        renaming create_array_type, but with an added parameter
        called "bit_stride".
        (create_array_type): Re-implement using
        create_array_type_with_stride.
        * dwarf2read.c (read_array_type): Add support for DW_AT_byte_stride
        and DW_AT_bit_stride attributes.

2014-02-26  Pedro Alves  <palves@redhat.com>

        * breakpoint.c (bpstat_check_breakpoint_conditions): Handle
        task-specific breakpoints.

2014-02-25  Pedro Alves  <palves@redhat.com>

        * ia64-linux-nat.c (ia64_linux_xfer_partial): Reimplement
        handling of object == TARGET_OBJECT_UNWIND_TABLE.

2014-02-25  Stan Shebs  <stan@codesourcery.com>

        * defs.h: Annotate comments for Doxygen.

2014-02-25  Tom Tromey  <tromey@redhat.com>

        * target.h (target_ignore): Don't declare.
        * target.c (target_ignore): Remove.

2014-02-25  Jan Kratochvil  <jan.kratochvil@redhat.com>

        PR gdb/16626
        * auto-load.c (auto_load_objfile_script_1): Change filename to
        debugfile.

2014-02-25  Joel Brobecker  <brobecker@adacore.com>

        * ia64-linux-nat.c (ia64_linux_xfer_partial): Add function
        documentation.  Adjust prototype to match the target_ops
        to_xfer_partial method.  Adjust implementation accordingly.

2014-02-25  Hui Zhu  <hui@codesourcery.com>

        * target.h (target_ops): Fix TARGET_DEFAULT_RETURN of
        to_traceframe_info.

2014-02-25  Kevin Buettner  <kevinb@redhat.com>

        * rl78-tdep.c (RL78_BANK0_RP0_PTR_REGNUM, RL78_BANK0_RP1_PTR_REGNUM)
        (RL78_BANK0_RP2_PTR_REGNUM, RL78_BANK0_RP3_PTR_REGNUM)
        (RL78_BANK1_RP0_PTR_REGNUM, RL78_BANK1_RP1_PTR_REGNUM)
        (RL78_BANK1_RP2_PTR_REGNUM, RL78_BANK1_RP3_PTR_REGNUM)
        (RL78_BANK2_RP0_PTR_REGNUM, RL78_BANK2_RP1_PTR_REGNUM)
        (RL78_BANK2_RP2_PTR_REGNUM, RL78_BANK2_RP3_PTR_REGNUM)
        (RL78_BANK3_RP0_PTR_REGNUM, RL78_BANK3_RP1_PTR_REGNUM)
        (RL78_BANK3_RP2_PTR_REGNUM, RL78_BANK3_RP3_PTR_REGNUM):
        New constants.
        (rl78_register_type): Use a data pointer type for SP and
        new pseudo registers mentioned above.  Use a 16 bit integer
        type for all other register pairs.
        (rl78_register_name, rl78_g10_register_name): Update for
        new pseudo registers.
        (rl78_pseudo_register_read): Likewise.
        (rl78_pseudo_register_write): Likewise.
        (rl78_dwarf_reg_to_regnum): Return register numbers representing
        to the newly added pseudo registers.

2014-02-24  Doug Evans  <dje@google.com>

        * value.c (record_latest_value): Fix comment.
        * printcmd.c (print_command_1): Remove code to handle -1 return from
        record_latest_value.

2014-02-24  Pedro Alves  <palves@redhat.com>

        * procfs.c (procfs_target): Don't install procfs_xfer_memory as
        deprecated_xfer_memory hook.
        (procfs_xfer_partial): Call procfs_xfer_memory instead
        of the deprecated_xfer_memory target hook.
        (procfs_xfer_memory): Adjust interface as a to_xfer_partial
        helper.

2014-02-24  Yuanhui Zhang  <asmwarrior@gmail.com>

        * windows-nat.c (windows_xfer_shared_libraries): Return
        TARGET_XFER_EOF if LEN is zero to fix an assert failure when
        requested object is TARGET_OBJECT_LIBRARIES.

2014-02-24  Yao Qi  <yao@codesourcery.com>

        * target.h (enum target_xfer_status)
        <TARGET_XFER_E_UNAVAILABLE>: Rename it to ...
        <TARGET_XFER_UNAVAILABLE>: ... it with setting value 2
        explicitly.  New.
        * corefile.c (memory_error_message): User updated.
        * exec.c (section_table_read_available_memory): Likewise.
        * record-btrace.c (record_btrace_xfer_partial): Likewise.
        * target.c (target_xfer_status_to_string): Likewise.
        (raw_memory_xfer_partial): Likewise.
        (memory_xfer_partial_1, target_xfer_partial): Likewise.
        * valops.c (read_value_memory): Likewise.
        * exec.h: Update comments.

2014-02-24  Yao Qi  <yao@codesourcery.com>

        * target.c (target_xfer_status_to_string): Rename argument err
        to status.
        * target.h (target_xfer_status_to_string): Update declaration.
        Replace target_xfer_error_to_string with
        target_xfer_status_to_string in comment.

2014-02-24  Yao Qi  <yao@codesourcery.com>

        * mips-linux-nat.c (super_close): Update its type.
        (mips_linux_close): Pass 'self' to super_close.

2014-02-24  Yao Qi  <yao@codesourcery.com>

        * target.h (TARGET_XFER_STATUS_ERROR_P): Remove.
        * corefile.c (read_memory): Adjusted.
        * target.c (target_write_with_progress): Adjusted.

2014-02-23  Yao Qi  <yao@codesourcery.com>

        Revert two patches:

        2013-10-25  Yao Qi  <yao@codesourcery.com>

        * remote.c (remote_traceframe_info): Return early if
        traceframe is not selected.

        2013-07-19  Yao Qi  <yao@codesourcery.com>

        * target.c (update_current_target): Change the default action
        of 'to_traceframe_info' from tcomplain to return_zero.
        * target.h (struct target_ops) <to_traceframe_info>: Add more
        comments.

2014-02-23  Yao Qi  <yao@codesourcery.com>

        * valops.c (read_value_memory): Rewrite it.  Call
        target_xfer_partial in a loop.
        * exec.h (section_table_available_memory): Remove declaration.
        Move comments to ...
        * exec.c (section_table_available_memory): ... here.  Make it
        static.

2014-02-23  Yao Qi  <yao@codesourcery.com>

        * exec.c (section_table_read_available_memory): New function.
        * exec.h (section_table_read_available_memory): Declare.
        * ctf.c (ctf_xfer_partial): Call
        section_table_read_available_memory.
        * tracefile-tfile.c (tfile_xfer_partial): Likewise.

2014-02-23  Yao Qi  <yao@codesourcery.com>

        * ctf.c (ctf_xfer_partial): Move code to ...
        * exec.c (exec_read_partial_read_only): ... it.  New function.
        * tracefile-tfile.c (tfile_xfer_partial): Likewise.
        * tracefile.c: Include "exec.h".
        * exec.h (exec_read_partial_read_only): Declare.

2014-02-23  Yao Qi  <yao@codesourcery.com>

        * tracefile-tfile.c (tfile_has_all_memory): Remove.
        (tfile_has_memory): Remove.
        (init_tfile_ops): Don't set fields to_has_all_memory and
        to_has_memory of tfile_ops.
        * tracefile.c (tracefile_has_all_memory): New function.
        (tracefile_has_memory): New function.
        (init_tracefile_ops): Initialize fields to_has_all_memory and
        to_has_memory of 'ops'.

2014-02-23  Yao Qi  <yao@codesourcery.com>

        * ctf.c (ctf_has_stack, ctf_has_registers): Remove.
        (ctf_thread_alive, ctf_get_trace_status): Remove.
        (init_ctf_ops): Don't set some fields of ctf_ops.  Call
        init_tracefile_ops.
        * tracefile-tfile.c (tfile_get_trace_status): Remove.
        (tfile_has_stack, tfile_has_registers): Remove.
        (tfile_thread_alive): Remove.
        (init_tfile_ops): Don't set some fields of tfile_ops.  Call
        init_tracefile_ops.
        * tracefile.c (tracefile_has_stack): New function.
        (tracefile_has_registers): New function.
        (tracefile_thread_alive): New function.
        (tracefile_get_trace_status): New function.
        (init_tracefile_ops): New function.
        * tracefile.h (init_tracefile_ops): Declare.

2014-02-23  Yao Qi  <yao@codesourcery.com>

        * tracepoint.c (TFILE_PID): Move it to tracefile-tfile.c.
        (O_LARGEFILE): Likewise.
        (tfile_ops): Likewise.
        (TRACE_HEADER_SIZE): Likewise.
        (trace_fd, trace_frames_offset, cur_offset): Likewise.
        (cur_data_size): Likewise.
        (tfile_read, tfile_open, tfile_interp_line): Likewise.
        (tfile_close, tfile_files_info): Likewise.
        (tfile_get_trace_status): Likewise.
        (tfile_get_tracepoint_status): Likewise.
        (tfile_get_traceframe_address): Likewise.
        (tfile_trace_find, match_blocktype): Likewise.
        (traceframe_walk_blocks, traceframe_find_block_type): Likewise.
        (tfile_fetch_registers, tfile_xfer_partial): Likewise.
        (tfile_get_trace_state_variable_value): Likewise.
        (tfile_has_all_memory, tfile_has_memory): Likewise.
        (tfile_has_stack, tfile_has_registers): Likewise.
        (tfile_thread_alive, build_traceframe_info): Likewise.
        (tfile_traceframe_info, init_tfile_ops): Likewise.
        (_initialize_tracepoint): Don't call init_tfile_ops
        and add_target_with_completer.
        * tracefile-tfile.c: Include regcache.h, inferior.h, gdbthread.h,
        exec.h, completer.h and filenames.h.
        (_initialize_tracefile_tfile): New function.

2014-02-23  Yao Qi  <yao@codesourcery.com>

        * Makefile.in (REMOTE_OBS): Append tracefile.o and
        tracefile-tfile.o.
        (HFILES_NO_SRCDIR): Add tracefile.h.
        * ctf.c: Include "tracefile.h".
        * tracefile.h: New file.
        * tracefile.c: New file
        * tracefile-tfile.c: New file.
        * tracepoint.c: Include "tracefile.h".
        (free_uploaded_tps, free_uploaded_tsvs): Remove declarations.
        (stop_reason_names): Add const.
        (trace_file_writer_xfree): Move it to tracefile.c.
        (trace_save, trace_save_command, trace_save_tfile): Likewise.
        (trace_save_ctf): Likewise.
        (struct tfile_trace_file_writer): Move it to tracefile-tfile.c.
        (tfile_target_save, tfile_dtor, tfile_start): Likewise.
        (tfile_write_header, tfile_write_regblock_type): Likewise.
        (tfile_write_status, tfile_write_uploaded_tsv): Likewise.
        (tfile_write_uploaded_tp, tfile_write_definition_end): Likewise.
        (tfile_write_raw_data, tfile_end): Likewise.
        (tfile_trace_file_writer_new): Likewise.
        (free_uploaded_tp): Make it extern.
        (free_uploaded_tsv): Make it extern.
        (_initialize_tracepoint): Move code to register command 'tsave'
        to tracefile.c.
        * tracepoint.h (stop_reason_names): Declare.
        (struct trace_frame_write_ops): Move it to tracefile.h.
        (struct trace_file_write_ops): Likewise.
        (struct trace_file_writer): Likewise.
        (free_uploaded_tsvs, free_uploaded_tps): Declare.

2014-02-21  Jan Kratochvil  <jan.kratochvil@redhat.com>

        PR gdb/16594
        * common/linux-osdata.c (linux_common_core_of_thread): Find the end of
        process name.
        (get_cores_used_by_process): New parameter num_cores, use it.
        (linux_xfer_osdata_processes): Pass num_cores to it.
        * linux-tdep.c (linux_info_proc, linux_fill_prpsinfo): Find the end of
        process name.

2014-02-21  Andreas Arnez  <arnez@vnet.linux.ibm.com>

        * target.c (memory_xfer_partial): Fix length arg in call to
        breakpoint_xfer_memory.

2014-02-20  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR tdep/16397
        * i386-tdep.c (i386_stap_parse_special_token_triplet): Check if a
        number comes after the + or - signs.  Adjust length of register
        name to be extracted.

2014-02-20  Tom Tromey  <tromey@redhat.com>

        * varobj.h (c_varobj_ops, cplus_varobj_ops, java_varobj_ops)
        (ada_varobj_ops): Mark "extern".

2014-02-20  Tom Tromey  <tromey@redhat.com>

        * dbxread.c (read_dbx_symtab): Remove last_o_file_start.

2014-02-20  Doug Evans  <xdje42@gmail.com>

        * guile/scm-gsmob.c (gdbscm_init_eqable_gsmob): New arg containing_scm.
        All callers updated.
        (gdbscm_fill_eqable_gsmob_ptr_slot): Delete arg containing_scm.
        All callers updated.
        * guile/guile-internal.h (gdbscm_init_eqable_gsmob): Update.
        (gdbscm_fill_eqable_gsmob_ptr_slot): Update.

2014-02-20  lin zuojian  <manjian2006@gmail.com>
            Joel Brobecker  <brobecker@adacore.com>
            Doug Evans  <xdje42@gmail.com>

        PR symtab/16581
        * dwarf2read.c (struct die_info): New member in_process.
        (reset_die_in_process): New function.
        (process_die): Set it at the start, reset when returning.
        (inherit_abstract_dies): Only call process_die if origin_child_die
        not already being processed.

2014-02-20  Joel Brobecker  <brobecker@adacore.com>

        * windows-nat.c (handle_unload_dll): Add function documentation.
        (do_initial_windows_stuff): Add comment explaining why we wait
        until after inferior initialization has finished before
        processing all DLLs.

2014-02-20  Joel Brobecker  <brobecker@adacore.com>

        * windows-nat.c (get_module_name): Delete.
        (windows_get_exec_module_filename): New function, mostly
        inspired from get_module_name.
        (windows_pid_to_exec_file): Replace call to get_module_name
        by call to windows_get_exec_module_filename.

2014-02-20  Joel Brobecker  <brobecker@adacore.com>

        * windows-nat.c (handle_load_dll): Rewrite this function's
        introductory comment.  Remove code using get_module_name
        to get the DLL's name.

2014-02-20  Joel Brobecker  <brobecker@adacore.com>

        * windows-nat.c (get_windows_debug_event): Ignore
        LOAD_DLL_DEBUG_EVENT and UNLOAD_DLL_DEBUG_EVENT
        if windows_initialization_done == 0.
        (windows_add_all_dlls): Renames windows_ensure_ntdll_loaded.
        Adjust implementation to always load all DLLs.
        (do_initial_windows_stuff): Replace call to
        windows_ensure_ntdll_loaded by call to windows_add_all_dlls.

2014-02-20  Joel Brobecker  <brobecker@adacore.com>

        * windows-nat.c (_initialize_windows_nat): Deprecate the
        "dll-symbols" command.  Turn the "add-shared-symbol-files"
        and "assf" aliases into commands, and deprecate them as well.
        * NEWS: Add entry explaining that "dll-symbols" and its two
        aliases are now deprecated.

2014-02-20  Joel Brobecker  <brobecker@adacore.com>

        * dec-thread.c (dec_thread_get_ada_task_ptid): Avoid unescaped
        new-line in debug string.  Remove trailing spaces.

2014-02-19  Stan Shebs  <stan@codesourcery.com>

        * darwin-nat.c (darwin_xfer_partial): Fix return type.

2014-02-19  Siva Chandra Reddy  <sivachandra@google.com>

        * NEWS: Add entry for the new feature
        * python/py-value.c (valpy_binop): Call value_x_binop for struct
        and class values.

2014-02-19  Stan Shebs  <stan@codesourcery.com>

        * MAINTAINERS: List Yao Qi as nios2 maintainer.

2014-02-19  Pedro Alves  <palves@redhat.com>

        * common/ptid.h (struct ptid): Mention that process_stratum
        targets should prefer ptid.lwp.

2014-02-19  Pedro Alves  <palves@redhat.com>

        * remote.c (remote_thread_alive, write_ptid, read_ptid)
        (read_ptid, remote_newthread_step, remote_threads_extra_info)
        (remote_get_ada_task_ptid, append_resumption, remote_stop_ns)
        (threadalive_test, remote_pid_to_str): Use the ptid.lwp field to
        store remote thread ids rather than ptid.tid.
        (_initialize_remote): Adjust.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.c (target_get_unwinder): Rewrite.
        (target_get_tailcall_unwinder): Rewrite.
        * record-btrace.c (record_btrace_to_get_unwinder): New function.
        (record_btrace_to_get_tailcall_unwinder): New function.
        (init_record_btrace_ops): Update.
        * target.h (struct target_ops) <to_get_unwinder,
        to_get_tailcall_unwinder>: Now function pointers.  Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * nto-procfs.c (procfs_remove_hw_breakpoint): Add 'self'
        argument.
        (init_procfs_ops): Correctly set to_remove_hw_breakpoint.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * record-btrace.c (record_btrace_decr_pc_after_break): Delegate
        directly.
        * target-delegates.c: Rebuild.
        * target.h (struct target_ops) <to_decr_pc_after_break>: Use
        TARGET_DEFAULT_FUNC.
        * target.c (default_target_decr_pc_after_break): Rename from
        forward_target_decr_pc_after_break.  Simplify.
        (target_decr_pc_after_break): Rely on delegation.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.c (update_current_target): Do not INHERIT to_doc or
        to_magic.  Do not de_fault to_open or to_close.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * gcore.h (objfile_find_memory_regions): Declare.
        * gcore.c (objfile_find_memory_regions): No longer static.  Add
        "self" argument.
        (_initialize_gcore): Don't call exec_set_find_memory_regions.
        * exec.c: Include gcore.h.
        (exec_set_find_memory_regions): Remove.
        (exec_find_memory_regions): Remove.
        (exec_do_find_memory_regions): Remove.
        (init_exec_ops): Update.
        * defs.h (exec_set_find_memory_regions): Remove.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.h (struct target_ops) <to_extra_thread_info,
        to_thread_name, to_pid_to_exec_file, to_get_section_table,
        to_memory_map, to_read_description, to_traceframe_info>: Use NULL,
        not 0, in TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.c (complete_target_initialization): Remove casts.  Use
        return_zero_has_execution.
        (return_zero): Add "ignore" argument.
        (return_zero_has_execution): New function.
        (init_dummy_target): Remove casts.  Use
        return_zero_has_execution.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.c (update_current_target): Update comments.  Do not
        INHERIT to_stratum.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * arm-linux-nat.c (arm_linux_read_description): Delegate when
        needed.
        * corelow.c (core_read_description): Delegate when needed.
        * remote.c (remote_read_description): Delegate when needed.
        * target-delegates.c: Rebuild.
        * target.c (target_read_description): Rewrite.
        * target.h (struct target_ops) <to_read_description>: Update
        comment.  Use TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_can_run.
        (find_default_run_target): Check against delegate_can_run.
        * target.h (struct target_ops) <to_can_run>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_disconnect): Unconditionally delegate.
        * target.h (struct target_ops) <to_disconnect>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * record.c (record_stop): Unconditionally delegate.
        * target-delegates.c: Rebuild.
        * target.c (target_stop_recording): Unconditionally delegate.
        * target.h (struct target_ops) <to_stop_recording>: Use
        TARGET_DEFAULT_IGNORE.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_enable_btrace): Unconditionally delegate.
        * target.h (struct target_ops) <to_enable_btrace>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_read_btrace): Unconditionally delegate.
        * target.h (struct target_ops) <to_read_btrace>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_teardown_btrace): Unconditionally delegate.
        * target.h (struct target_ops) <to_teardown_btrace>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_disable_btrace): Unconditionally delegate.
        * target.h (struct target_ops) <to_disable_btrace>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (default_search_memory): New function.
        (simple_search_memory): Update comment.
        (target_search_memory): Unconditionally delegate.
        * target.h (struct target_ops) <to_search_memory>: Use
        TARGET_DEFAULT_FUNC.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * auxv.c (default_auxv_parse): No longer static.
        (target_auxv_parse): Unconditionally delegate.
        * auxv.h (default_auxv_parse): Declare.
        * target-delegates.c: Rebuild.
        * target.c: Include auxv.h.
        * target.h (struct target_ops) <to_auxv_parse>: Use
        TARGET_DEFAULT_FUNC.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_memory_map): Unconditionally delegate.
        * target.h (struct target_ops) <to_memory_map>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_thread_alive): Unconditionally delegate.
        * target.h (struct target_ops) <to_thread_alive>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_save_record): Unconditionally delegate.
        * target.h (struct target_ops) <to_save_record>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_delete_record): Unconditionally delegate.
        * target.h (struct target_ops) <to_delete_record>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_record_is_replaying): Unconditionally
        delegate.
        * target.h (struct target_ops) <to_record_is_replaying>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_goto_record_begin): Unconditionally delegate.
        * target.h (struct target_ops) <to_goto_record_begin>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_goto_record_end): Unconditionally delegate.
        * target.h (struct target_ops) <to_goto_record_end>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_goto_record): Unconditionally delegate.
        * target.h (struct target_ops) <to_goto_record>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_insn_history): Unconditionally delegate.
        * target.h (struct target_ops) <to_insn_history>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_insn_history_from): Unconditionally delegate.
        * target.h (struct target_ops) <to_insn_history_from>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_insn_history_range): Unconditionally delegate.
        * target.h (struct target_ops) <to_insn_history_range>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_call_history): Unconditionally delegate.
        * target.h (struct target_ops) <to_call_history>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_call_history_from): Unconditionally delegate.
        * target.h (struct target_ops) <to_call_history_from>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_call_history_range): Unconditionally delegate.
        * target.h (struct target_ops) <to_call_history_range>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_verify_memory): Unconditionally delegate.
        * target.h (struct target_ops) <to_verify_memory>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_core_of_thread): Unconditionally delegate.
        * target.h (struct target_ops) <to_core_of_thread>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_flash_done): Unconditionally delegate.
        * target.h (struct target_ops) <to_flash_done>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_flash_erase): Unconditionally delegate.
        * target.h (struct target_ops) <to_flash_erase>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_get_section_table): Unconditionally delegate.
        * target.h (struct target_ops) <to_get_section_table>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_pid_to_str): Unconditionally delegate.
        (init_dummy_target): Don't initialize to_pid_to_str.
        (default_pid_to_str): Rename from dummy_pid_to_str.
        * target.h (struct target_ops) <to_pid_to_str>: Use
        TARGET_DEFAULT_FUNC.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_find_new_threads): Unconditionally delegate.
        * target.h (struct target_ops) <to_find_new_threads>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_program_signals): Unconditionally delegate.
        * target.h (struct target_ops) <to_program_signals>: Use
        TARGET_DEFAULT_IGNORE.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_pass_signals): Unconditionally delegate.
        * target.h (struct target_ops) <to_pass_signals>: Use
        TARGET_DEFAULT_IGNORE.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (default_mourn_inferior): New function.
        (target_mourn_inferior): Unconditionally delegate.
        * target.h (struct target_ops) <to_mourn_inferior>: Use
        TARGET_DEFAULT_FUNC.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (default_follow_fork): New function.
        (target_follow_fork): Unconditionally delegate.
        * target.h (struct target_ops) <to_follow_fork>: Use
        TARGET_DEFAULT_FUNC.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_kill): Unconditionally delegate.
        * target.h (struct target_ops) <to_kill>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_masked_watch_num_registers): Unconditionally
        delegate.
        * target.h (struct target_ops) <to_masked_watch_num_registers>:
        Use TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_remove_mask_watchpoint): Unconditionally
        delegate.
        * target.h (struct target_ops) <to_remove_mask_watchpoint>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_insert_mask_watchpoint): Unconditionally
        delegate.
        * target.h (struct target_ops) <to_insert_mask_watchpoint>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_ranged_break_num_registers): Unconditionally
        delegate.
        * target.h (struct target_ops) <to_ranged_break_num_registers>:
        Use TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_fetch_registers): Unconditionally delegate.
        * target.h (struct target_ops) <to_fetch_registers>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_stop.
        * target.h (struct target_ops) <to_stop>: Use
        TARGET_DEFAULT_IGNORE.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_can_run_breakpoint_commands.
        * target.h (struct target_ops) <to_can_run_breakpoint_commands>:
        Use TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_supports_evaluation_of_breakpoint_conditions.
        * target.h (struct target_ops)
        <to_supports_evaluation_of_breakpoint_conditions>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_augmented_libraries_svr4_read.
        * target.h (struct target_ops) <to_augmented_libraries_svr4_read>:
        Use TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_can_use_agent.
        * target.h (struct target_ops) <to_can_use_agent>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_use_agent.
        * target.h (struct target_ops) <to_use_agent>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_traceframe_info.
        (return_null): Remove.
        * target.h (struct target_ops) <to_traceframe_info>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_static_tracepoint_markers_by_strid.
        * target.h (struct target_ops)
        <to_static_tracepoint_markers_by_strid>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_static_tracepoint_marker_at.
        * target.h (struct target_ops) <to_static_tracepoint_marker_at>:
        Use TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_set_permissions.
        * target.h (struct target_ops) <to_set_permissions>: Use
        TARGET_DEFAULT_IGNORE.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_get_tib_address.
        * target.h (struct target_ops) <to_get_tib_address>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_set_trace_notes.
        * target.h (struct target_ops) <to_set_trace_notes>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't initialize
        to_set_trace_buffer_size.
        * target.h (struct target_ops) <to_set_trace_buffer_size>: Use
        TARGET_DEFAULT_IGNORE.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_set_circular_trace_buffer.
        * target.h (struct target_ops) <to_set_circular_trace_buffer>: Use
        TARGET_DEFAULT_IGNORE.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_set_disconnected_tracing.
        * target.h (struct target_ops) <to_set_disconnected_tracing>: Use
        TARGET_DEFAULT_IGNORE.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_get_min_fast_tracepoint_insn_len.
        (return_minus_one): Remove.
        * target.h (struct target_ops)
        <to_get_min_fast_tracepoint_insn_len>: Use TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_get_raw_trace_data.
        * target.h (struct target_ops) <to_get_raw_trace_data>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_upload_trace_state_variables.
        * target.h (struct target_ops) <to_upload_trace_state_variables>:
        Use TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_upload_tracepoints.
        * target.h (struct target_ops) <to_upload_tracepoints>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_save_trace_data.
        * target.h (struct target_ops) <to_save_trace_data>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_get_trace_state_variable_value.
        * target.h (struct target_ops)
        <to_get_trace_state_variable_value>: Use TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_trace_find.
        * target.h (struct target_ops): Use TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_trace_stop.
        * target.h (struct target_ops) <to_trace_stop>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_get_tracepoint_status.
        * target.h (struct target_ops) <to_get_tracepoint_status>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_get_trace_status.
        * target.h (struct target_ops) <to_get_trace_status>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_trace_start.
        * target.h (struct target_ops) <to_trace_start>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_trace_set_readonly_regions.
        * target.h (struct target_ops) <to_trace_set_readonly_regions>:
        Use TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_disable_tracepoint.
        * target.h (struct target_ops) <to_disable_tracepoint>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_enable_tracepoint.
        * target.h (struct target_ops) <to_enable_tracepoint>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_download_trace_state_variable.
        * target.h (struct target_ops) <to_download_trace_state_variable>:
        Use TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_can_download_tracepoint.
        * target.h (struct target_ops) <to_can_download_tracepoint>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_download_tracepoint.
        * target.h (struct target_ops) <to_download_tracepoint>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_trace_init.
        * target.h (struct target_ops) <to_trace_init>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_supports_string_tracing.
        * target.h (struct target_ops) <to_supports_string_tracing>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_supports_enable_disable_tracepoint.
        * target.h (struct target_ops)
        <to_supports_enable_disable_tracepoint>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_supports_multi_process.
        * target.h (struct target_ops) <to_supports_multi_process>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_get_ada_task_ptid.
        * target.h (struct target_ops) <to_get_ada_task_ptid>: Use
        TARGET_DEFAULT_FUNC.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_thread_architecture.
        * target.h (struct target_ops) <to_thread_architecture>: Use
        TARGET_DEFAULT_FUNC.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_execution_direction.
        * target.h (struct target_ops) <to_execution_direction>: Use
        TARGET_DEFAULT_FUNC.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_can_execute_reverse.
        * target.h (struct target_ops) <to_can_execute_reverse>: Use
        TARGET_DEFAULT_RETURN.
        (target_can_execute_reverse): Unconditionally delegate.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_goto_bookmark.
        (dummy_goto_bookmark): Remove.
        (init_dummy_target): Don't inherit or default to_goto_bookmark.
        * target.h (struct target_ops) <to_goto_bookmark>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_get_bookmark.
        (dummy_get_bookmark): Remove.
        (init_dummy_target): Don't inherit or default to_get_bookmark.
        * target.h (struct target_ops) <to_get_bookmark>: Use
        TARGET_DEFAULT_NORETURN

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_make_corefile_notes.
        (init_dummy_target): Don't initialize to_make_corefile_notes.
        * target.h (struct target_ops) <to_make_corefile_notes>: Use
        TARGET_DEFAULT_FUNC.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_find_memory_regions.
        (init_dummy_target): Don't initialize to_find_memory_regions.
        * target.h (struct target_ops) <to_find_memory_regions>: Use
        TARGET_DEFAULT_FUNC.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_log_command.
        * target.h (struct target_ops) <to_log_command>: Use
        TARGET_DEFAULT_IGNORE.
        (target_log_command): Unconditionally delegate.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_pid_to_exec_file.
        * target.h (struct target_ops) <to_pid_to_exec_file>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_thread_name.
        (target_thread_name): Unconditionally delegate.
        * target.h (struct target_ops) <to_thread_name>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_extra_thread_info.
        * target.h (struct target_ops) <to_extra_thread_info>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_has_exited.
        * target.h (struct target_ops) <to_has_exited>: Use
        TARGET_DEFAULT_RETURN..

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_set_syscall_catchpoint.
        (return_one): Remove.
        * target.h (struct target_ops) <to_set_syscall_catchpoint>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_insert_exec_catchpoint.
        * target.h (struct target_ops) <to_insert_exec_catchpoint>: Use
        TARGET_DEFAULT_RETURN.

2014-01-08  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_insert_exec_catchpoint.
        * target.h (struct target_ops) <to_insert_exec_catchpoint>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_remove_vfork_catchpoint.
        * target.h (struct target_ops) <to_remove_vfork_catchpoint>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_insert_vfork_catchpoint.
        * target.h (struct target_ops) <to_insert_vfork_catchpoint>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_remove_fork_catchpoint.
        * target.h (struct target_ops) <to_remove_fork_catchpoint>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_insert_fork_catchpoint.
        * target.h (struct target_ops) <to_insert_fork_catchpoint>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_post_startup_inferior.
        * target.h (struct target_ops) <to_post_startup_inferior>: Use
        TARGET_DEFAULT_IGNORE.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_load.
        * target.h (struct target_ops) <to_load>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_terminal_info.
        * target.h (struct target_ops) <to_terminal_info>: Use
        TARGET_DEFAULT_FUNC.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_terminal_save_ours.
        * target.h (struct target_ops) <to_terminal_save_ours>: Use
        TARGET_DEFAULT_IGNORE.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_terminal_ours.
        * target.h (struct target_ops) <to_terminal_ours>: Use
        TARGET_DEFAULT_IGNORE.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_terminal_ours_for_output.
        * target.h (struct target_ops) <to_terminal_ours_for_output>: Use
        TARGET_DEFAULT_IGNORE.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_terminal_inferior.
        * target.h (struct target_ops) <to_terminal_inferior>: Use
        TARGET_DEFAULT_IGNORE.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_terminal_init.
        * target.h (struct target_ops) <to_terminal_init>: Use
        TARGET_DEFAULT_IGNORE.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_can_accel_watchpoint_condition.
        * target.h (struct target_ops)
        <to_can_accel_watchpoint_condition>: Use TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_region_ok_for_hw_watchpoint.
        * target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
        Use TARGET_DEFAULT_FUNC.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_watchpoint_addr_within_range.
        * target.h (struct target_ops) <to_watchpoint_addr_within_range>:
        Use TARGET_DEFAULT_FUNC.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_remove_watchpoint.
        * target.h (struct target_ops) <to_remove_watchpoint>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_insert_watchpoint.
        * target.h (struct target_ops) <to_insert_watchpoint>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_remove_hw_breakpoint.
        * target.h (struct target_ops) <to_remove_hw_breakpoint>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_insert_hw_breakpoint.
        * target.h (struct target_ops) <to_insert_hw_breakpoint>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_can_use_hw_breakpoint.
        * target.h (struct target_ops) <to_can_use_hw_breakpoint>: Use
        TARGET_DEFAULT_RETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_files_info.
        * target.h (struct target_ops) <to_files_info>: Use
        TARGET_DEFAULT_IGNORE.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_store.
        * target.h (struct target_ops) <to_store>: Use
        TARGET_DEFAULT_NORETURN.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_post_attach.
        * target.h (struct target_ops) <to_post_attach>: Use
        TARGET_DEFAULT_IGNORE.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (update_current_target): Don't inherit or default
        to_rcmd.
        (default_rcmd): New function.
        (do_monitor_command): Unconditionally delegate.
        * target.h (struct target_ops) <to_rmcd>: Use
        TARGET_DEFAULT_FUNC.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (init_dummy_target): Don't initialize to_attach.
        (target_attach): Unconditionally delegate.
        * target.h (struct target_ops) <to_attach>: Use
        TARGET_DEFAULT_FUNC.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target-delegates.c: Rebuild.
        * target.c (target_detach): Unconditionally delegate.
        (init_dummy_target): Don't initialize to_detach.
        * target.h (struct target_ops) <to_detach>: Use
        TARGET_DEFAULT_IGNORE.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_augmented_libraries_svr4_read>:
        Add argument.
        (target_augmented_libraries_svr4_read): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_augmented_libraries_svr4_read): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_call_history_range>: Add
        argument.
        * target.c (target_call_history_range): Add argument.
        * record-btrace.c (record_btrace_call_history_range): Add 'self'
        argument.
        (record_btrace_call_history_from): Update.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_call_history_from>: Add
        argument.
        * target.c (target_call_history_from): Add argument.
        * record-btrace.c (record_btrace_call_history_from): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_call_history>: Add argument.
        * target.c (target_call_history): Add argument.
        * record-btrace.c (record_btrace_call_history): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_insn_history_range>: Add
        argument.
        * target.c (target_insn_history_range): Add argument.
        * record-btrace.c (record_btrace_insn_history_range): Add 'self'
        argument.
        (record_btrace_insn_history_from): Update.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_insn_history_from>: Add
        argument.
        * target.c (target_insn_history_from): Add argument.
        * record-btrace.c (record_btrace_insn_history_from): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_insn_history>: Add argument.
        * target.c (target_insn_history): Add argument.
        * record-btrace.c (record_btrace_insn_history): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_goto_record>: Add argument.
        * target.c (target_goto_record): Add argument.
        * record-full.c (record_full_goto): Add 'self' argument.
        * record-btrace.c (record_btrace_goto): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_goto_record_end>: Add argument.
        * target.c (target_goto_record_end): Add argument.
        * record-full.c (record_full_goto_end): Add 'self' argument.
        * record-btrace.c (record_btrace_goto_end): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_goto_record_begin>: Add
        argument.
        * target.c (target_goto_record_begin): Add argument.
        * record-full.c (record_full_goto_begin): Add 'self' argument.
        * record-btrace.c (record_btrace_goto_begin): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_record_is_replaying>: Add
        argument.
        * target.c (target_record_is_replaying): Add argument.
        * record-full.c (record_full_is_replaying): Add 'self' argument.
        * record-btrace.c (record_btrace_is_replaying): Add 'self'
        argument.
        (record_btrace_xfer_partial, record_btrace_store_registers)
        (record_btrace_prepare_to_store, record_btrace_resume)
        (record_btrace_wait, record_btrace_decr_pc_after_break)
        (record_btrace_find_new_threads, record_btrace_thread_alive):
        Update.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_delete_record>: Add argument.
        * target.c (target_delete_record): Add argument.
        * record-full.c (record_full_delete): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_save_record>: Add argument.
        * target.c (target_save_record): Add argument.
        * record-full.c (record_full_save): Add 'self' argument.
        (record_full_save): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_info_record>: Add argument.
        * target.c (target_info_record): Add argument.
        * record.c (info_record_command): Add argument.
        * record-full.c (record_full_info): Add 'self' argument.
        * record-btrace.c (record_btrace_info): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_stop_recording>: Add argument.
        * target.c (target_stop_recording): Add argument.
        * record.c (record_stop): Add argument.
        * record-btrace.c (record_btrace_stop_recording): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_read_btrace>: Add argument.
        * target.c (struct target_ops) <to_read_btrace>: Add argument.
        * remote.c (struct target_ops) <to_read_btrace>: Add 'self'
        argument.
        * amd64-linux-nat.c (amd64_linux_read_btrace): New function.
        (_initialize_amd64_linux_nat): Use it.
        * i386-linux-nat.c (i386_linux_read_btrace): New function.
        (_initialize_i386_linux_nat): Use it.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_teardown_btrace>: Add argument.
        * target.c (target_teardown_btrace): Add argument.
        * remote.c (remote_teardown_btrace): Add 'self' argument.
        * i386-linux-nat.c (i386_linux_teardown_btrace): Add 'self'
        argument.
        * amd64-linux-nat.c (amd64_linux_teardown_btrace): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_disable_btrace>: Add argument.
        * target.c (target_disable_btrace): Add argument.
        * remote.c (remote_disable_btrace): Add 'self' argument.
        * i386-linux-nat.c (i386_linux_disable_btrace): Add 'self'
        argument.
        * amd64-linux-nat.c (amd64_linux_disable_btrace): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_enable_btrace>: Add argument.
        * target.c (target_enable_btrace): Add argument.
        * remote.c (remote_enable_btrace): Add 'self' argument.
        * i386-linux-nat.c (i386_linux_enable_btrace): Add 'self'
        argument.
        * amd64-linux-nat.c (amd64_linux_enable_btrace): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_can_use_agent>: Add argument.
        (target_can_use_agent): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_can_use_agent): Add 'self' argument.
        * inf-child.c (inf_child_can_use_agent): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_use_agent>: Add argument.
        (target_use_agent): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_use_agent): Add 'self' argument.
        * inf-child.c (inf_child_use_agent): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * tracepoint.c (tfile_traceframe_info): Add 'self' argument.
        * target.h (struct target_ops) <to_traceframe_info>: Add argument.
        (target_traceframe_info): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_traceframe_info): Add 'self' argument.
        * ctf.c (ctf_traceframe_info): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (target_static_tracepoint_markers_by_strid): Add
        argument.
        (struct target_ops) <to_static_tracepoint_markers_by_strid>: Add
        'self' argument.
        * target.c (update_current_target): Update.
        * remote.c (struct target_ops)
        <to_static_tracepoint_markers_by_strid>: Add 'self' argument.
        * linux-nat.c (struct target_ops)
        <to_static_tracepoint_markers_by_strid>: Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_static_tracepoint_marker_at>:
        Add argument.
        (target_static_tracepoint_marker_at): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_static_tracepoint_marker_at): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_set_permissions>: Add argument.
        (target_set_permissions): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_set_permissions): Add 'self' argument.
        (remote_start_remote): Update.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * windows-nat.c (windows_get_tib_address): Add 'self' argument.
        * target.h (struct target_ops) <to_get_tib_address>: Add argument.
        (target_get_tib_address): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_get_tib_address): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_set_trace_notes>: Add argument.
        (target_set_trace_notes): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_set_trace_notes): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_set_trace_buffer_size>: Add
        argument.
        (target_set_trace_buffer_size): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_set_trace_buffer_size): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_set_circular_trace_buffer>: Add
        argument.
        (target_set_circular_trace_buffer): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_set_circular_trace_buffer): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_set_disconnected_tracing>: Add
        argument.
        (target_set_disconnected_tracing): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_set_disconnected_tracing): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops)
        <to_get_min_fast_tracepoint_insn_len>: Add argument.
        (target_get_min_fast_tracepoint_insn_len): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_get_min_fast_tracepoint_insn_len): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_get_raw_trace_data>: Add
        argument.
        (target_get_raw_trace_data): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_get_raw_trace_data): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_upload_trace_state_variables>:
        Add argument.
        (target_upload_trace_state_variables): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_upload_trace_state_variables): Add 'self'
        argument.
        (remote_start_remote): Update.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_upload_tracepoints>: Add
        argument.
        (target_upload_tracepoints): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_upload_tracepoints): Add 'self' argument.
        (remote_start_remote): Update.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_save_trace_data>: Add argument.
        (target_save_trace_data): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_save_trace_data): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * tracepoint.c (tfile_get_trace_state_variable_value): Add 'self'
        argument.
        * target.h (struct target_ops)
        <to_get_trace_state_variable_value>: Add argument.
        (target_get_trace_state_variable_value): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_get_trace_state_variable_value): Add 'self'
        argument.
        * ctf.c (ctf_get_trace_state_variable_value): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * tracepoint.c (tfile_trace_find): Add 'self' argument.
        * target.h (struct target_ops) <to_trace_find>: Add argument.
        (target_trace_find): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_trace_find): Add 'self' argument.
        * ctf.c (ctf_trace_find): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_trace_stop>: Add argument.
        (target_trace_stop): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_trace_stop): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * tracepoint.c (tfile_get_tracepoint_status): Add 'self' argument.
        * target.h (struct target_ops) <to_get_tracepoint_status>: Add
        argument.
        (target_get_tracepoint_status): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_get_tracepoint_status): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * tracepoint.c (tfile_get_trace_status): Add 'self' argument.
        * target.h (struct target_ops) <to_get_trace_status>: Add
        argument.
        (target_get_trace_status): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_get_trace_status): Add 'self' argument.
        (remote_start_remote, remote_can_download_tracepoint): Update.
        * ctf.c (ctf_get_trace_status): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_trace_start>: Add argument.
        (target_trace_start): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_trace_start): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_trace_set_readonly_regions>:
        Add argument.
        (target_trace_set_readonly_regions): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_trace_set_readonly_regions): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_disable_tracepoint>: Add
        argument.
        (target_disable_tracepoint): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_disable_tracepoint): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_enable_tracepoint>: Add
        argument.
        (target_enable_tracepoint): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_enable_tracepoint): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_download_trace_state_variable>:
        Add argument.
        (target_download_trace_state_variable): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_download_trace_state_variable): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_can_download_tracepoint>: Add
        argument.
        (target_can_download_tracepoint): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_can_download_tracepoint): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_download_tracepoint>: Add
        argument.
        (target_download_tracepoint): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_download_tracepoint): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_trace_init>: Add argument.
        (target_trace_init): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_trace_init): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_fileio_readlink>: Add argument.
        * target.c (target_fileio_readlink): Add argument.
        * remote.c (remote_hostio_readlink): Add 'self' argument.
        * inf-child.c (inf_child_fileio_readlink): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_fileio_unlink>: Add argument.
        * target.c (target_fileio_unlink): Add argument.
        * remote.c (remote_hostio_unlink): Add 'self' argument.
        (remote_file_delete): Update.
        * inf-child.c (inf_child_fileio_unlink): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_fileio_close>: Add argument.
        * target.c (target_fileio_close): Add argument.
        * remote.c (remote_hostio_close): Add 'self' argument.
        (remote_hostio_close_cleanup): Update.
        (remote_bfd_iovec_close, remote_file_put, remote_file_get):
        Update.
        * inf-child.c (inf_child_fileio_close): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_fileio_pread>: Add argument.
        * target.c (target_fileio_pread): Add argument.
        * remote.c (remote_hostio_pread): Add 'self' argument.
        (remote_bfd_iovec_pread, remote_file_get): Update.
        * inf-child.c (inf_child_fileio_pread): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_fileio_pwrite>: Add argument.
        * target.c (target_fileio_pwrite): Add argument.
        * remote.c (remote_hostio_pwrite): Add 'self' argument.
        (remote_file_put): Update.
        * inf-child.c (inf_child_fileio_pwrite): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_fileio_open>: Add argument.
        * target.c (target_fileio_open): Add argument.
        * remote.c (remote_hostio_open): Add 'self' argument.
        (remote_bfd_iovec_open): Add 'self' argument.
        (remote_file_put): Add 'self' argument.
        (remote_file_get): Add 'self' argument.
        * inf-child.c (inf_child_fileio_open): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_can_run_breakpoint_commands>:
        Add argument.
        (target_can_run_breakpoint_commands): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_can_run_breakpoint_commands): Add 'self'
        argument.
        (remote_insert_breakpoint): Add 'self' argument.
        (remote_insert_hw_breakpoint): Add 'self' argument.
        (remote_can_run_breakpoint_commands): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops)
        <to_supports_evaluation_of_breakpoint_conditions>: Add argument.
        (target_supports_evaluation_of_breakpoint_conditions): Add
        argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_supports_cond_breakpoints): Add 'self'
        argument.
        (remote_insert_breakpoint): Add 'self' argument.
        (remote_insert_hw_breakpoint): Add 'self' argument.
        (remote_supports_cond_breakpoints): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_supports_string_tracing>: Add
        argument.
        (target_supports_string_tracing): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_supports_string_tracing): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops)
        <to_supports_disable_randomization>: Add argument.
        * target.c (find_default_supports_disable_randomization): Add
        argument.
        (target_supports_disable_randomization): Add argument.
        (find_default_supports_disable_randomization): Add 'self'
        argument.
        * remote.c (extended_remote_supports_disable_randomization): Add
        'self' argument.
        (remote_supports_disable_randomization): Add 'self' argument.
        (extended_remote_create_inferior): Update.
        * linux-nat.c (linux_nat_supports_disable_randomization): Add
        'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops)
        <to_supports_enable_disable_tracepoint>: Add argument.
        (target_supports_enable_disable_tracepoint): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_supports_enable_disable_tracepoint): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_supports_multi_process>: Add
        argument.
        (target_supports_multi_process): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_supports_multi_process): Add 'self' argument.
        * linux-nat.c (linux_nat_supports_multi_process): Add 'self'
        argument.
        * darwin-nat.c (darwin_supports_multi_process): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_execution_direction>: Add
        argument.
        (target_execution_direction): Add argument.
        * target.c (default_execution_direction): Add 'self' argument.
        * record-full.c (record_full_execution_direction): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_can_execute_reverse>: Add
        argument.
        (target_can_execute_reverse): Add argument.
        * remote.c (remote_can_execute_reverse): Add 'self' argument.
        * record-full.c (record_full_can_execute_reverse): Add 'self'
        argument.
        * record-btrace.c (record_btrace_can_execute_reverse): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * windows-nat.c (windows_get_ada_task_ptid): Add 'self' argument.
        * target.h (struct target_ops) <to_get_ada_task_ptid>: Add
        argument.
        (target_get_ada_task_ptid): Add argument.
        * target.c (update_current_target): Update.
        (default_get_ada_task_ptid): Add 'self' argument.
        * sol-thread.c (sol_get_ada_task_ptid): Add 'self' argument.
        * remote.c (remote_get_ada_task_ptid): Add 'self' argument.
        * ravenscar-thread.c (ravenscar_get_ada_task_ptid): Add 'self'
        argument.
        * linux-thread-db.c (thread_db_get_ada_task_ptid): Add 'self'
        argument.
        * inf-ttrace.c (inf_ttrace_get_ada_task_ptid): Add 'self'
        argument.
        * dec-thread.c (dec_thread_get_ada_task_ptid): Add 'self'
        argument.
        * darwin-nat.c (darwin_get_ada_task_ptid): Add 'self' argument.
        * aix-thread.c (aix_thread_get_ada_task_ptid): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_goto_bookmark>: Add argument.
        (target_goto_bookmark): Add argument.
        * target.c (dummy_goto_bookmark): Add 'self' argument.
        * record-full.c (record_full_goto_bookmark): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_get_bookmark>: Add argument.
        (target_get_bookmark): Add argument.
        * target.c (dummy_get_bookmark): Add 'self' argument.
        * record-full.c (record_full_get_bookmark): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_make_corefile_notes>: Add
        argument.
        (target_make_corefile_notes): Add argument.
        * target.c (dummy_make_corefile_notes): Add 'self' argument.
        * procfs.c (procfs_make_note_section): Add 'self' argument.
        (procfs_make_note_section): Add 'self' argument.
        (procfs_make_note_section): Add 'self' argument.
        * linux-nat.c (linux_nat_make_corefile_notes): Add 'self'
        argument.
        * fbsd-nat.h (fbsd_make_corefile_notes): Add 'self' argument.
        * fbsd-nat.c (fbsd_make_corefile_notes): Add 'self' argument.
        * exec.c (exec_make_note_section): Add 'self' argument.
        (exec_make_note_section): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_find_memory_regions>: Add
        argument.
        (target_find_memory_regions): Add argument.
        * target.c (dummy_find_memory_regions): Add 'self' argument.
        * procfs.c (proc_find_memory_regions): Add 'self' argument.
        * gnu-nat.c (gnu_find_memory_regions): Add 'self' argument.
        * fbsd-nat.h (fbsd_find_memory_regions): Add 'self' argument.
        * fbsd-nat.c (fbsd_find_memory_regions): Add 'self' argument.
        * exec. (exec_do_find_memory_regions): New global.
        (exec_set_find_memory_regions): Rewrite.
        (exec_find_memory_regions): New function.
        (init_exec_ops): Use exec_find_memory_regions.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_supports_non_stop>: Add
        argument.
        * target.c (find_default_supports_non_stop): Add argument.
        (target_supports_non_stop): Add argument.
        (find_default_supports_non_stop): Add 'self' argument.
        * remote.c (remote_supports_non_stop): Add 'self' argument.
        * linux-nat.c (linux_nat_supports_non_stop): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_log_command>: Add argument.
        (target_log_command): Add argument.
        * serial.h (serial_log_command): Add 'self' argument.
        * serial.c (serial_log_command): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * windows-nat.c (windows_pid_to_exec_file): Add 'self' argument.
        * target.h (struct target_ops) <to_pid_to_exec_file>: Add
        argument.
        (target_pid_to_exec_file): Add argument.
        * target.c (debug_to_pid_to_exec_file): Add argument.
        (update_current_target): Update.
        * nbsd-nat.h (nbsd_pid_to_exec_file): Add 'self' argument.
        * nbsd-nat.c (nbsd_pid_to_exec_file): Add 'self' argument.
        * linux-nat.c (linux_child_pid_to_exec_file): Add 'self' argument.
        (linux_handle_extended_wait): Update.
        * inf-child.c (inf_child_pid_to_exec_file): Add 'self' argument.
        * fbsd-nat.h (fbsd_pid_to_exec_file): Add 'self' argument.
        * fbsd-nat.c (fbsd_pid_to_exec_file): Add 'self' argument.
        * darwin-nat.c (darwin_pid_to_exec_file): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_rcmd>: Add argument.
        (target_rcmd): Add argument.
        * target.c (debug_to_rcmd): Add argument.
        (update_current_target, do_monitor_command): Update.
        * remote.c (remote_rcmd): Add 'self' argument.
        * monitor.c (monitor_rcmd): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * windows-nat.c (windows_stop): Add 'self' argument.
        * target.h (struct target_ops) <to_stop>: Add argument.
        * target.c (target_stop): Add argument.
        (debug_to_stop): Add argument.
        (update_current_target): Update.
        * remote.c (remote_stop): Add 'self' argument.
        * remote-sim.c (gdbsim_stop): Add 'self' argument.
        (gdbsim_cntrl_c): Update.
        * remote-m32r-sdi.c (m32r_stop): Add 'self' argument.
        * procfs.c (procfs_stop): Add 'self' argument.
        * nto-procfs.c (procfs_stop): Add 'self' argument.
        * monitor.c (monitor_stop): Add 'self' argument.
        (monitor_open): Update.
        * linux-nat.c (linux_nat_stop): Add argument.
        * inf-ptrace.c (inf_ptrace_stop): Add 'self' argument.
        * gnu-nat.c (gnu_stop): Add 'self' argument.
        * darwin-nat.c (darwin_stop): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_thread_name>: Add argument.
        * target.c (target_thread_name): Add argument.
        (update_current_target): Update.
        * linux-nat.c (linux_nat_thread_name): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_extra_thread_info>: Add
        argument.
        (target_extra_thread_info): Add argument.
        * target.c (update_current_target): Update.
        * remote.c (remote_threads_extra_info): Add 'self' argument.
        * ravenscar-thread.c (ravenscar_extra_thread_info): Add 'self'
        argument.
        * nto-tdep.h (nto_extra_thread_info): Add 'self' argument.
        * nto-tdep.c (nto_extra_thread_info): Add 'self' argument.
        * linux-thread-db.c (thread_db_extra_thread_info): Add 'self'
        argument.
        * inf-ttrace.c (inf_ttrace_extra_thread_info): Add 'self'
        argument.
        * bsd-uthread.c (bsd_uthread_extra_thread_info): Add 'self'
        argument.
        * aix-thread.c (aix_thread_extra_thread_info): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_program_signals>: Add argument.
        * target.c (target_program_signals): Add argument.
        * remote.c (remote_program_signals): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_pass_signals>: Add argument.
        * target.c (target_pass_signals): Add argument.
        * remote.c (remote_pass_signals): Add 'self' argument.
        (remote_start_remote): Update.
        * procfs.c (procfs_pass_signals): Add 'self' argument.
        * nto-procfs.c (procfs_pass_signals): Add 'self' argument.
        * linux-nat.c (linux_nat_pass_signals): Add 'self' argument.
        (linux_nat_create_inferior, linux_nat_attach): Update.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * windows-nat.c (windows_can_run): Add 'self' argument.
        * target.h (struct target_ops) <to_can_run>: Add argument.
        (target_can_run): Add argument.
        * target.c (debug_to_can_run): Add argument.
        (update_current_target): Update.
        * nto-procfs.c (procfs_can_run): Add 'self' argument.
        * inf-child.c (inf_child_can_run): Add 'self' argument.
        * go32-nat.c (go32_can_run): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_has_exited>: Add argument.
        (target_has_exited): Add argument.
        * target.c (debug_to_has_exited): Add argument.
        (update_current_target): Update.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_set_syscall_catchpoint>: Add
        argument.
        (target_set_syscall_catchpoint): Add argument.
        * linux-nat.c (linux_child_set_syscall_catchpoint): Add 'self'
        argument.
        * target.c (update_current_target): Update.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_remove_exec_catchpoint>: Add
        argument.
        (target_remove_exec_catchpoint): Add argument.
        * target.c (debug_to_remove_exec_catchpoint): Add argument.
        (update_current_target): Update.
        * linux-nat.c (linux_child_remove_exec_catchpoint): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_insert_exec_catchpoint>: Add
        argument.
        (target_insert_exec_catchpoint): Add argument.
        * target.c (debug_to_insert_exec_catchpoint): Add argument.
        (update_current_target): Update.
        * linux-nat.c (linux_child_insert_exec_catchpoint): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_remove_vfork_catchpoint>: Add
        argument.
        (target_remove_vfork_catchpoint): Add argument.
        * target.c (debug_to_remove_vfork_catchpoint): Add argument.
        (update_current_target): Update.
        * linux-nat.c (linux_child_remove_vfork_catchpoint): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_insert_vfork_catchpoint>: Add
        argument.
        (target_insert_vfork_catchpoint): Add argument.
        * target.c (debug_to_insert_vfork_catchpoint): Add argument.
        (update_current_target): Update.
        * linux-nat.c (linux_child_insert_vfork_catchpoint): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_remove_fork_catchpoint>: Add
        argument.
        (target_remove_fork_catchpoint): Add argument.
        * target.c (debug_to_remove_fork_catchpoint): Add argument.
        (update_current_target): Update.
        * linux-nat.c (linux_child_remove_fork_catchpoint): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_insert_fork_catchpoint>: Add
        argument.
        (target_insert_fork_catchpoint): Add argument.
        * target.c (debug_to_insert_fork_catchpoint): Add argument.
        (update_current_target): Update.
        * linux-nat.c (linux_child_insert_fork_catchpoint): Add 'self'
        argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_post_startup_inferior>: Add
        argument.
        (target_post_startup_inferior): Add argument.
        * target.c (debug_to_post_startup_inferior): Add argument.
        (update_current_target): Update.
        * spu-linux-nat.c (spu_child_post_startup_inferior): Add 'self'
        argument.
        * linux-nat.c (linux_child_post_startup_inferior): Add 'self'
        argument.
        * inf-ptrace.c (inf_ptrace_post_startup_inferior): Add 'self'
        argument.
        * inf-child.c (inf_child_post_startup_inferior): Add 'self'
        argument.
        * i386-linux-nat.c (i386_linux_child_post_startup_inferior): Add
        'self' argument.
        (super_post_startup_inferior): Likewise.
        * amd64-linux-nat.c (amd64_linux_child_post_startup_inferior): Add
        'self' argument.
        (super_post_startup_inferior): Likewise.
        * aarch64-linux-nat.c (aarch64_linux_child_post_startup_inferior):
        Add 'self' argument.
        (super_post_startup_inferior): Likewise.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_load>: Add argument.
        * target.c (target_load): Add argument.
        (debug_to_load): Add argument.
        (update_current_target): Update.
        * remote.c (remote_load): Add 'self' argument.
        * remote-sim.c (gdbsim_load): Add 'self' argument.
        * remote-mips.c (mips_load): Add 'self' argument.
        * remote-m32r-sdi.c (m32r_load): Add 'self' argument.
        * monitor.c (monitor_load): Add 'self' argument.
        * m32r-rom.c (m32r_load_gen): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_terminal_info>: Add argument.
        (target_terminal_info): Add argument.
        * target.c (debug_to_terminal_info): Add argument.
        (default_terminal_info): Likewise.
        * inflow.c (child_terminal_info): Add 'self' argument.
        * inferior.h (child_terminal_info): Add 'self' argument.
        * go32-nat.c (go32_terminal_info): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_terminal_save_ours>: Add
        argument.
        (target_terminal_save_ours): Add argument.
        * target.c (debug_to_terminal_save_ours): Add argument.
        (update_current_target): Update.
        * inflow.c (terminal_save_ours): Add 'self' argument.
        * inferior.h (terminal_save_ours): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_terminal_ours>: Add argument.
        (target_terminal_ours): Add argument.
        * target.c (debug_to_terminal_ours): Add argument.
        (update_current_target): Update.
        * remote.c (remote_terminal_ours): Add 'self' argument.
        (remote_close): Update.
        * linux-nat.c (linux_nat_terminal_ours): Add 'self' argument.
        * inflow.c (terminal_ours): Add 'self' argument.
        * inferior.h (terminal_ours): Add 'self' argument.
        * go32-nat.c (go32_terminal_ours): Add 'self' argument.

2014-02-19  Pedro Alves  <palves@redhat.com>
            Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_terminal_ours_for_output>: Add
        argument.
        (target_terminal_ours_for_output): Add argument.
        * target.c (debug_to_terminal_ours_for_output): Add argument.
        (update_current_target): Update.
        * inflow.c (terminal_ours_for_output): Add 'self' argument.
        * inferior.h (terminal_ours_for_output): Add 'self' argument.
        * go32-nat.c (go32_terminal_ours): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_terminal_inferior>: Add
        argument.
        * target.c (target_terminal_inferior): Add argument.
        (update_current_target): Update.
        * remote.c (remote_terminal_inferior): Add 'self' argument.
        * linux-nat.c (linux_nat_terminal_inferior): Add 'self' argument.
        * inflow.c (terminal_inferior): Add 'self' argument.
        * inferior.h (terminal_inferior): Add 'self' argument.
        * go32-nat.c (go32_terminal_inferior): Add 'self' argument.
        (go32_terminal_inferior): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_terminal_init>: Add argument.
        (target_terminal_init): Add argument.
        * target.c (debug_to_terminal_init): Add argument.
        (update_current_target): Update.
        * inflow.c (terminal_init_inferior): Add 'self' argument.
        * inferior.h (terminal_init_inferior): Add 'self' argument.
        * go32-nat.c (go32_terminal_init): Add 'self' argument.
        * gnu-nat.c (gnu_terminal_init_inferior): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops)
        <to_can_accel_watchpoint_condition>: Add argument.
        (target_can_accel_watchpoint_condition): Add argument.
        * target.c (debug_to_can_accel_watchpoint_condition): Add
        argument.
        (update_current_target): Update.
        * ppc-linux-nat.c (ppc_linux_can_accel_watchpoint_condition): Add
        'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
        Add argument.
        (target_region_ok_for_hw_watchpoint): Add argument.
        * target.c (debug_to_region_ok_for_hw_watchpoint): Add argument.
        (default_region_ok_for_hw_watchpoint): Add argument.
        * spu-multiarch.c (spu_region_ok_for_hw_watchpoint): Add argument.
        * s390-linux-nat.c (s390_region_ok_for_hw_watchpoint): Add 'self'
        argument.
        * remote.c (remote_region_ok_for_hw_watchpoint): Add 'self'
        argument.
        * procfs.c (procfs_region_ok_for_hw_watchpoint): Add 'self'
        argument.
        * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Add
        'self' argument.
        * mips-linux-nat.c (mips_linux_region_ok_for_hw_watchpoint): Add
        'self' argument.
        * inf-ttrace.c (inf_ttrace_region_ok_for_hw_watchpoint): Add
        'self' argument.
        * i386-nat.c (i386_region_ok_for_watchpoint): Add 'self' argument.
        * arm-linux-nat.c (arm_linux_region_ok_for_hw_watchpoint): Add
        'self' argument.
        * aarch64-linux-nat.c (aarch64_linux_region_ok_for_hw_watchpoint):
        Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_insert_watchpoint>: Add
        argument.
        (target_insert_watchpoint): Add argument.
        * target.c (debug_to_insert_watchpoint): Add argument.
        (update_current_target): Update.
        * s390-linux-nat.c (s390_insert_watchpoint): Add 'self' argument.
        * remote.c (remote_insert_watchpoint): Add 'self' argument.
        * remote-mips.c (mips_insert_watchpoint): Add 'self' argument.
        * remote-m32r-sdi.c (m32r_insert_watchpoint): Add 'self' argument.
        * procfs.c (procfs_insert_watchpoint): Add 'self' argument.
        * ppc-linux-nat.c (ppc_linux_insert_watchpoint): Add 'self'
        argument.
        * nto-procfs.c (procfs_insert_hw_watchpoint): Add 'self' argument.
        (procfs_insert_hw_watchpoint): Add 'self' argument.
        * mips-linux-nat.c (mips_linux_insert_watchpoint): Add 'self'
        argument.
        * inf-ttrace.c (inf_ttrace_insert_watchpoint): Add 'self'
        argument.
        * ia64-linux-nat.c (ia64_linux_insert_watchpoint): Add 'self'
        argument.
        * i386-nat.c (i386_insert_watchpoint): Add 'self' argument.
        * arm-linux-nat.c (arm_linux_insert_watchpoint): Add 'self'
        argument.
        * aarch64-linux-nat.c (aarch64_linux_insert_watchpoint): Add
        'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_remove_watchpoint>: Add
        argument.
        (target_remove_watchpoint): Add argument.
        * target.c (debug_to_remove_watchpoint): Add argument.
        (update_current_target): Update.
        * s390-linux-nat.c (s390_remove_watchpoint): Add 'self' argument.
        * remote.c (remote_remove_watchpoint): Add 'self' argument.
        * remote-mips.c (mips_remove_watchpoint): Add 'self' argument.
        * remote-m32r-sdi.c (m32r_remove_watchpoint): Add 'self' argument.
        * procfs.c (procfs_remove_watchpoint): Add 'self' argument.
        * ppc-linux-nat.c (ppc_linux_remove_watchpoint): Add 'self'
        argument.
        * nto-procfs.c (procfs_remove_hw_watchpoint): Add 'self' argument.
        * mips-linux-nat.c (mips_linux_remove_watchpoint): Add 'self'
        argument.
        * inf-ttrace.c (inf_ttrace_remove_watchpoint): Add 'self'
        argument.
        * ia64-linux-nat.c (ia64_linux_remove_watchpoint): Add 'self'
        argument.
        * i386-nat.c (i386_remove_watchpoint): Add 'self' argument.
        * arm-linux-nat.c (arm_linux_remove_watchpoint): Add 'self'
        argument.
        * aarch64-linux-nat.c (aarch64_linux_remove_watchpoint): Add
        'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_remove_hw_breakpoint>: Add
        argument.
        (target_remove_hw_breakpoint): Add argument.
        * target.c (debug_to_remove_hw_breakpoint): Add argument.
        (update_current_target): Update.
        * remote.c (remote_remove_hw_breakpoint): Add 'self' argument.
        * ppc-linux-nat.c (ppc_linux_remove_hw_breakpoint): Add 'self'
        argument.
        * i386-nat.c (i386_remove_hw_breakpoint): Add 'self' argument.
        * arm-linux-nat.c (arm_linux_remove_hw_breakpoint): Add 'self'
        argument.
        * aarch64-linux-nat.c (aarch64_linux_remove_hw_breakpoint): Add
        'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_insert_hw_breakpoint>: Add
        argument.
        (target_insert_hw_breakpoint): Add argument.
        * target.c (debug_to_insert_hw_breakpoint): Add argument.
        (update_current_target): Update.
        * remote.c (remote_insert_hw_breakpoint): Add 'self' argument.
        * ppc-linux-nat.c (ppc_linux_insert_hw_breakpoint): Add 'self'
        argument.
        * nto-procfs.c (procfs_insert_hw_breakpoint): Add 'self' argument.
        * i386-nat.c (i386_insert_hw_breakpoint): Add 'self' argument.
        * arm-linux-nat.c (arm_linux_insert_hw_breakpoint): Add 'self'
        argument.
        * aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Add
        'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_can_use_hw_breakpoint>: Add
        argument.
        (target_can_use_hardware_watchpoint): Add argument.
        * target.c (debug_to_can_use_hw_breakpoint): Add argument.
        (update_current_target): Update.
        * spu-linux-nat.c (spu_can_use_hw_breakpoint): Add 'self'
        argument.
        * s390-linux-nat.c (s390_can_use_hw_breakpoint): Add 'self'
        argument.
        * remote.c (remote_check_watch_resources): Add 'self' argument.
        * remote-mips.c (mips_can_use_watchpoint): Add 'self' argument.
        * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint): Add 'self'
        argument.
        * procfs.c (procfs_can_use_hw_breakpoint): Add 'self' argument.
        * ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Add 'self'
        argument.
        * nto-procfs.c (procfs_can_use_hw_breakpoint): Add 'self'
        argument.
        * mips-linux-nat.c (mips_linux_can_use_hw_breakpoint): Add 'self'
        argument.
        * inf-ttrace.c (inf_ttrace_can_use_hw_breakpoint): Add 'self'
        argument.
        * ia64-linux-nat.c (ia64_linux_can_use_hw_breakpoint): Add 'self'
        argument.
        * ia64-hpux-nat.c (ia64_hpux_can_use_hw_breakpoint): Add 'self'
        argument.
        * i386-nat.c (i386_can_use_hw_breakpoint): Add 'self' argument.
        * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Add 'self'
        argument.
        * aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Add
        'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_post_attach>: Add argument.
        (target_post_attach): Add argument.
        * target.c (debug_to_post_attach): Add argument.
        (update_current_target): Update.
        * spu-linux-nat.c (spu_child_post_attach): Add 'self' argument.
        * nto-procfs.c (procfs_post_attach): Add 'self' argument.
        * linux-nat.c (linux_child_post_attach): Add 'self' argument.
        * inf-ptrace.c (inf_ptrace_post_attach): Add 'self' argument.
        * inf-child.c (inf_child_post_attach): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * windows-nat.c (windows_close): Add 'self' argument.
        * tracepoint.c (tfile_close): Add 'self' argument.
        * target.h (struct target_ops) <to_close>: Add argument.
        * target.c (target_close): Add argument.
        (update_current_target): Update.
        * remote.c (remote_close): Add 'self' argument.
        * remote-sim.c (gdbsim_close): Add 'self' argument.
        * remote-mips.c (mips_close): Add 'self' argument.
        * remote-m32r-sdi.c (m32r_close): Add 'self' argument.
        * record-full.c (record_full_close): Add 'self' argument.
        * record-btrace.c (record_btrace_close): Add 'self' argument.
        * monitor.h (monitor_close): Add 'self' argument.
        * monitor.c (monitor_close): Add 'self' argument.
        * mips-linux-nat.c (mips_linux_close): Add 'self' argument.
        * linux-nat.c (linux_nat_close): Add argument.
        * go32-nat.c (go32_close): Add 'self' argument.
        * exec.c (exec_close_1): Add 'self' argument.
        * ctf.c (ctf_close): Add 'self' argument.
        * corelow.c (core_close): Add 'self' argument.
        (core_close_cleanup): Update.
        * bsd-uthread.c (bsd_uthread_close): Add 'self' argument.
        * bsd-kvm.c (bsd_kvm_close): Add 'self' argument.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * remote.c (remote_load): New function.
        (init_remote_ops): Use it.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * common/linux-btrace.c (linux_supports_btrace): Add "ops"
        argument.
        * common/linux-btrace.h (linux_supports_btrace): Update.
        * remote.c (remote_supports_btrace): Add "self" argument.
        * target-delegates.c: Rebuild.
        * target.c (target_supports_btrace): Remove.
        * target.h (struct target_ops) <to_supports_btrace>: Add
        target_ops argument.
        (target_supports_btrace): New define.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * record-full.c (record_full_beneath_to_resume_ops)
        (record_full_beneath_to_resume, record_full_beneath_to_wait_ops)
        (record_full_beneath_to_wait)
        (record_full_beneath_to_store_registers_ops)
        (record_full_beneath_to_store_registers)
        (record_full_beneath_to_xfer_partial_ops)
        (record_full_beneath_to_xfer_partial)
        (record_full_beneath_to_insert_breakpoint_ops)
        (record_full_beneath_to_insert_breakpoint)
        (record_full_beneath_to_remove_breakpoint_ops)
        (record_full_beneath_to_remove_breakpoint)
        (record_full_beneath_to_stopped_by_watchpoint)
        (record_full_beneath_to_stopped_data_address)
        (record_full_beneath_to_async, tmp_to_resume_ops, tmp_to_resume)
        (tmp_to_wait_ops, tmp_to_wait, tmp_to_store_registers_ops)
        (tmp_to_store_registers, tmp_to_xfer_partial_ops)
        (tmp_to_xfer_partial, tmp_to_instmp_to_insert_breakpoint_ops)
        (tmp_to_insert_breakpoint, tmp_to_remove_breakpoint_ops)
        (tmp_to_remove_breakpoint, tmp_to_stopped_by_watchpoint)
        (tmp_to_stopped_data_address, tmp_to_async): Remove.
        (record_full_open_1, record_full_open): Update.  Use RECORD_IS_USED.
        (record_full_resume, record_full_wait_1)
        (record_full_stopped_by_watchpoint, record_full_stopped_data_address)
        (record_full_store_registers, record_full_xfer_partial)
        (record_full_insert_breakpoint, record_full_remove_breakpoint)
        (record_full_async, record_full_core_xfer_partial): Use target
        delegation.
        * target-delegates.c: Rebuild.
        * target.c (current_xfer_partial): Remove.
        (update_current_target): Do not INHERIT or de_fault
        to_insert_breakpoint, to_remove_breakpoint,
        to_stopped_data_address, to_stopped_by_watchpoint, to_can_async_p,
        to_is_async_p, to_async.  Do not set to_xfer_partial field.
        (default_xfer_partial): Simplify.
        (current_xfer_partial): Remove.
        (target_wait, target_resume): Simplify.
        (find_default_can_async_p, find_default_is_async_p): Update.
        (init_dummy_target): Don't set to_can_async_p, to_is_async_p,
        to_xfer_partial, to_stopped_by_watchpoint,
        to_stopped_data_address.
        (target_store_registers): Simplify.
        (forward_target_remove_breakpoint)
        (forward_target_insert_breakpoint): Remove.
        (target_remove_breakpoint, target_insert_breakpoint)
        (debug_to_insert_breakpoint, debug_to_remove_breakpoint): Update.
        * target.h (struct target_ops) <to_resume, to_wait,
        to_store_registers, to_insert_breakpoint, to_remove_breakpoint,
        to_stopped_by_watchpoint, to_stopped_data_address, to_can_async_p,
        to_is_async_p, to_async, to_xfer_partial>: Add TARGET_DEFAULT
        markup.
        (forward_target_remove_breakpoint)
        (forward_target_insert_breakpoint): Remove.
        * record-btrace.c (record_btrace_remove_breakpoint): Delegate
        directly.
        (record_btrace_insert_breakpoint): Delegate directly.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        PR build/7701:
        * target-delegates.c: New file.
        * target.c: Include target-delegates.c.
        (init_dummy_target): Call install_dummy_methods.
        (complete_target_initialization): Call install_delegators.
        * target.h (TARGET_DEFAULT_IGNORE, TARGET_DEFAULT_NORETURN)
        (TARGET_DEFAULT_RETURN, TARGET_DEFAULT_FUNC): New defines.
        * make-target-delegates: New file.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * record.c (find_record_target): Use find_target_at.
        * target.c (find_target_at): New function.
        * target.h (find_target_at): Declare.

2014-02-19  Tom Tromey  <tromey@redhat.com>

        * aarch64-linux-nat.c (aarch64_linux_stopped_by_watchpoint):
        Add 'ops' argument.
        * arm-linux-nat.c (arm_linux_stopped_by_watchpoint): Add
        'ops' argument.
        * i386-nat.c (i386_stopped_by_watchpoint): Add 'ops' argument.
        * ia64-linux-nat.c (ia64_linux_stopped_by_watchpoint): Add
        'ops' argument.
        * inf-ttrace.c (inf_ttrace_stopped_by_watchpoint): Add 'ops'
        argument.
        * linux-nat.c (save_sigtrap): Update.
        (linux_nat_stopped_by_watchpoint, linux_nat_is_async_p)
        (linux_nat_can_async_p, linux_nat_async): Add 'ops' argument.
        (linux_nat_close): Update.
        * mips-linux-nat.c (mips_linux_stopped_by_watchpoint): Add 'ops'
        argument.
        * ppc-linux-nat.c (ppc_linux_stopped_by_watchpoint): Add 'ops'
        argument.
        * procfs.c (procfs_stopped_by_watchpoint): Add 'ops' argument.
        * record-full.c (record_full_beneath_to_stopped_by_watchpoint)
        (record_full_beneath_to_async, tmp_to_stopped_by_watchpoint)
        (tmp_to_async): Add 'ops' argument.
        (record_full_stopped_by_watchpoint, record_full_async)
        (record_full_can_async_p, record_full_is_async_p): Add 'ops'
        argument.
        * remote-m32r-sdi.c (m32r_insert_breakpoint, m32r_remove_breakpoint)
        (m32r_stopped_by_watchpoint): Add 'ops' argument.
        * remote-mips.c (mips_stopped_by_watchpoint): Add 'ops' argument.
        * remote.c (remote_stopped_by_watchpoint_p, remote_can_async_p)
        (remote_is_async_p, remote_async): Add 'ops' argument.
        (remote_stopped_data_address): Update.
        * s390-nat.c (s390_stopped_by_watchpoint): Add 'ops' argument.
        * target.c (update_current_target)
        (find_default_can_async_p, find_default_is_async_p): Update.
        (init_dummy_target): Update.
        (debug_to_stopped_by_watchpoint): Add 'ops' argument.
        * target.h (struct target_ops) <to_stopped_by_watchpoint,
        to_can_async_p, to_is_async_p, to_async>: Add 'ops' argument.
        (target_can_async_p, target_is_async_p, target_async)
        (target_stopped_by_watchpoint): Update.

2014-02-19  Yao Qi  <yao@codesourcery.com>

        PR gdb/16220
        * gdbarch.sh: Remove startup_gdbarch.
        * gdbarch.c: Regenerated.
        * gdbarch.h: Likewise.

2014-02-17  Kevin Buettner  <kevinb@redhat.com>

        * rl78-tdep.c (rl78_g10_register_name): New function.
        (rl78_return_value): Add g10 support.
        (rl78_gdbarch_init): Register rl78_g10_register_name for the
        g10.

2014-02-17  Doug Evans  <xdje42@gmail.com>

        * Makefile.in (SUBDIR_GUILE_OBS): Resort alphabetically.
        (SUBDIR_GUILE_SRCS): Ditto.
        (scm-gsmob.o): Ditto.

2014-02-17  Yao Qi  <yao@codesourcery.com>

        * gnu-nat.c (ILL_RPC): Declare defined function.

2014-02-17  Yao Qi  <yao@codesourcery.com>

        * gnu-nat.c (gnu_read_inferior): Change 'copy_count' type to
        mach_msg_type_number_t.
        (gnu_write_inferior): Likewise.

2014-02-17  Yao Qi  <yao@codesourcery.com>

        * gnu-nat.c (proc_get_exception_port): Use 'lu' insetad of 'd'
        in format string.
        (proc_steal_exc_port, make_proc, inf_set_pid): Likewise.
        (inf_validate_procs, inf_signal): Likewise.
        (S_exception_raise_request): Likewise.
        (do_mach_notify_dead_name): Likewise.
        (steal_exc_port): Likewise.
        (gnu_read_inferior): Change 'copy_count''s type to
        mach_msg_type_number_t.
        (gnu_write_inferior): Likewise.  Use 'lx' instead of 'x' in
        format string.

2014-02-16  Thomas Schwinge  <thomas@codesourcery.com>

        * gnu-nat.c (struct inf): Change pending_execs member to a 1-bit
        flag.  Adjust all users; in particular...
        (gnu_wait): ..., don't decrement its value in here...
        (gnu_create_inferior): ..., and instead set the flag in here,
        around the startup_inferior call, and call that one with
        START_INFERIOR_TRAPS_EXPECTED.

        * gnu-nat.c (ill_rpc): Remove function; replaced with this...
        (ILL_RPC): ... new macro.
        (do_mach_notify_no_senders, do_mach_notify_port_deleted)
        (do_mach_notify_msg_accepted, do_mach_notify_port_destroyed)
        (do_mach_notify_send_once, S_proc_setmsgport_reply)
        (S_proc_getmsgport_reply, S_msg_sig_post_reply): Generate stub
        functions with ILL_RPC macro.
        (S_proc_pid2task_reply, S_proc_task2pid_reply)
        (S_proc_task2proc_reply, S_proc_proc2task_reply)
        (S_proc_pid2proc_reply, S_proc_getprocinfo_reply)
        (S_proc_getprocargs_reply, S_proc_getprocenv_reply)
        (S_proc_getloginid_reply, S_proc_getloginpids_reply)
        (S_proc_getlogin_reply, S_proc_getsid_reply)
        (S_proc_getsessionpgids_reply, S_proc_getsessionpids_reply)
        (S_proc_getsidport_reply, S_proc_getpgrp_reply)
        (S_proc_getpgrppids_reply, S_proc_get_tty_reply)
        (S_proc_getnports_reply, S_proc_is_important_reply)
        (S_proc_get_code_reply): New stub functions, generated with
        ILL_RPC macro.

        * reply_mig_hack.awk: In phase 5, keep going if we have not yet
        collected the type check structures.

        * reply_mig_hack.awk: Don't expect to see the auto keyword.

2014-02-14  Doug Evans  <dje@google.com>

        * target.c (target_write_partial): Fix result type.

2014-02-14  Jose E. Marchesi  <jose.marchesi@oracle.com>

        * sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Register
        the proper offsets to access fpregset_t.

2014-02-13  Sanimir Agovic  <sanimir.agovic@intel.com>

        * cris-tdep.c (cris_supply_gregset): Remove zerobuf.
        (_initialize_cris_tdep): Remove cris_set_cmdlist, cris_show_cmdlist.
        * h8300-tdep.c (setmachinelist): Remove global.
        * hppa-tdep.c (hppa_sigtramp): Remove global.
        * mipsnbsd-tdep.c (sigtramp_retcode_mipsel, sigtramp_retcode_mipseb
        RETCODE_NWORDS, RETCODE_SIZE): Wrap code with #if 0.
        * ravenscar-thread.c (update_target_observer): Remove global.
        * rs6000-tdep.c (rs6000_gdbarch_init): Remove segment_regs.

2014-02-12  Tom Tromey  <tromey@redhat.com>

        * common/rsp-low.c: Update comments.
        * common/rsp-low.h: Update comments.

2014-02-12  Tom Tromey  <tromey@redhat.com>

        * common/rsp-low.c (convert_ascii_to_int): Remove.
        * common/rsp-low.h (convert_ascii_to_int): Don't declare.

2014-02-12  Tom Tromey  <tromey@redhat.com>

        * common/rsp-low.h (unhexify): Don't declare.
        * common/rsp-low.c (unhexify): Remove.

2014-02-12  Tom Tromey  <tromey@redhat.com>

        * common/rsp-low.h (convert_int_to_ascii): Don't declare.
        * common/rsp-low.c (convert_int_to_ascii): Remove.

2014-02-12  Tom Tromey  <tromey@redhat.com>

        * common/rsp-low.h (hexify): Don't declare.
        * common/rsp-low.c (hexify): Remove.

2014-02-12  Tom Tromey  <tromey@redhat.com>

        * common/rsp-low.c (hexify): Never take strlen of argument.

2014-02-12  Tom Tromey  <tromey@redhat.com>

        * common/rsp-low.c (bin2hex): Never take strlen of argument.
        * remote.c (extended_remote_run, remote_rcmd)
        (remote_download_trace_state_variable, remote_save_trace_data)
        (remote_set_trace_notes): Update.
        * tracepoint.c (encode_source_string, tfile_write_status)
        (tfile_write_uploaded_tsv): Update.

2014-02-12  Tom Tromey  <tromey@redhat.com>

        * tracepoint.c: Include rsp-low.h.
        * remote.h (hex2bin, bin2hex, unpack_varlen_hex): Don't declare.
        * remote.c: Include rsp-low.h.
        (hexchars, ishex, unpack_varlen_hex, pack_nibble, pack_hex_byte)
        (fromhex, hex2bin, tohex, bin2hex, remote_escape_output)
        (remote_unescape_input): Move to common/rsp-low.c.
        * common/rsp-low.h: New file.
        * common/rsp-low.c: New file.
        * Makefile.in (SFILES): Add common/rsp-low.c.
        (HFILES_NO_SRCDIR): Add common/rsp-low.h.
        (COMMON_OBS): Add rsp-low.o.
        (rsp-low.o): New target.

2014-02-12  Tom Tromey  <tromey@redhat.com>

        * utils.h: Include print-utils.h.
        (host_address_to_string, plongest, pulongest, phex, phex_nz)
        (int_string, core_addr_to_string, core_addr_to_string_nz)
        (hex_string, hex_string_custom): Don't declare.
        * utils.c (NUMCELLS, CELLSIZE, get_cell, decimal2str, pulongest)
        (plongest, thirty_two, phex, phex_nz, octal2str, hex_string)
        (hex_string_custom, int_string, core_addr_to_string)
        (core_addr_to_string_nz, host_address_to_string): Move to
        common/print-utils.c.
        * common/print-utils.h: New file.
        * common/print-utils.c: New file
        * Makefile.in (SFILES): Add common/print-utils.c.
        (HFILES_NO_SRCDIR): Add common/print-utils.h.
        (COMMON_OBS): Add print-utils.o.
        (print-utils.o): New target.

2014-02-12  Tom Tromey  <tromey@redhat.com>

        * nios2-tdep.c (nios2_stub_frame_base_address): Remove.

2014-02-12  Mark Kettenis  <kettenis@gnu.org>

        * sparc64obsd-tdep.c (sparc64obsd_init_abi): Call obsd_init_abi.

2014-02-12  Mark Kettenis  <kettenis@gnu.org>

        * inf-ptrace.c (inf_ptrace_xfer_partial): Return TARGET_XFER_EOF
        if a PT_IO ptrace request returns sucessfully but indicates that 0
        bytes were transferred.

2014-02-12  Pedro Alves  <palves@redhat.com>
            Kevin Buettner <kevinb@redhat.com>

        * gnu-v3-abi.c (build_gdb_vtable_type): Return a type marked with
        TYPE_INSTANCE_FLAG_CODE_SPACE.

2014-02-12  Pedro Alves  <palves@redhat.com>

        * h8300-tdep.c (pseudo_from_raw_register)
        (raw_from_pseudo_register): New functions.
        (h8300_pseudo_register_read, h8300_pseudo_register_write): Use
        them.

2014-02-12  Pedro Alves  <palves@redhat.com>

        * h8300-tdep.c (h8300_register_sim_regno): New function.
        (h8300_gdbarch_init): Install h8300_register_sim_regno as
        gdbarch_register_sim_regno hook.

2014-02-12  Sanimir Agovic  <sanimir.agovic@intel.com>

        * nios2-tdep.c (nios2_stub_frame_base): Remove global.

2014-02-12  Sanimir Agovic  <sanimir.agovic@intel.com>

        * tic6x-tdep.c (tic6x_gdbarch_init): Call frame_base_set_default.

2014-02-12  Mark Kettenis  <kettenis@gnu.org>

        * obsd-tdep.h (obsd_init_abi): New prototype.
        * obsd-tdep.c: Define enum with OpenBSD signal numbers.
        (obsd_gdb_signal_from_target, obsd_gdb_signal_to_target)
        (obsd_init_abi): New functions.
        * i386obsd-tdep.c: Include "obsd-tdep.h".
        (i386obsd_init_abi): Call obsd_init_abi.
        * amd64obsd-tdep.c: Include "obsd-tdep.h".
        (amd64obsd_init_abi): Call obsd_init_abi.
        * configure.tgt (i[34567]86-*-openbsd*, x86_64-*-openbsd*): Add
        obsd-tdep.c to gdb_target_obs.

2014-02-11  Jose E. Marchesi  <jose.marchesi@oracle.com>

        * sparc64-tdep.c (sparc64_store_arguments): Do not align complex
        double float arguments to 16-byte in the argument slots.

2014-02-11  Doug Evans  <xdje42@gmail.com>

        * configure.ac: Don't crash if pkg-config is not found and guile
        wasn't explicitly requested.  Use AC_MSG_ERROR instead of AC_ERROR
        in guile checks.
        * configure: Regenerate.

2014-02-11  Yao Qi  <yao@codesourcery.com>

        * aix-thread.c (aix_thread_xfer_partial): Update comments.
        * auxv.c (procfs_xfer_auxv, memory_xfer_auxv): Likewise.
        * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
        * gnu-nat.c (gnu_xfer_memory): Likewise.
        * inf-ptrace.c (inf_ptrace_xfer_partial):  Likewise.
        * rs6000-nat.c (rs6000_xfer_partial): Likewise.
        * sparc-nat.c (sparc_xfer_wcookie): Likewise.
        * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.

2014-02-11  Yao Qi  <yao@codesourcery.com>

        * target.h (enum target_xfer_error): Rename to ...
        (enum target_xfer_status): ... it.  New.  All users updated.
        (enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
        New.
        (TARGET_XFER_STATUS_ERROR_P): New macro.
        (target_xfer_error_to_string): Remove declaration.
        (target_xfer_status_to_string): Declare.
        (target_xfer_partial_ftype): Adjust it.
        (struct target_ops) <to_xfer_partial>: Return
        target_xfer_status.  Add argument xfered_len.  Update
        comments.
        * target.c (target_xfer_error_to_string): Rename to ...
        (target_xfer_status_to_string): ... it.  New.  All callers
        updated.
        (target_read_live_memory): Likewise.  Call target_xfer_partial
        instead of target_read.
        (memory_xfer_live_readonly_partial): Return
        target_xfer_status.  Add argument xfered_len.
        (raw_memory_xfer_partial): Likewise.
        (memory_xfer_partial_1): Likewise.
        (memory_xfer_partial): Likewise.
        (target_xfer_partial): Likewise.  Check *XFERED_LEN is set
        properly.  Update debug message.
        (default_xfer_partial, current_xfer_partial): Likewise.
        (target_write_partial): Likewise.
        (target_read_partial): Likewise.  All callers updated.
        (read_whatever_is_readable): Likewise.
        (target_write_with_progress): Likewise.
        (target_read_alloc_1): Likewise.

        * aix-thread.c (aix_thread_xfer_partial): Likewise.
        * auxv.c (procfs_xfer_auxv): Likewise.
        (ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
        * bfd-target.c (target_bfd_xfer_partial): Likewise.
        * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
        * bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
        * corefile.c (read_memory): Adjust.
        * corelow.c (core_xfer_partial): Likewise.
        * ctf.c (ctf_xfer_partial): Likewise.
        * darwin-nat.c (darwin_read_dyld_info): Likewise.  All callers
        updated.
        (darwin_xfer_partial): Likewise.
        * exec.c (section_table_xfer_memory_partial): Likewise.  All
        callers updated.
        (exec_xfer_partial): Likewise.
        * exec.h (section_table_xfer_memory_partial): Update
        declaration.
        * gnu-nat.c (gnu_xfer_memory): Likewise.  Assert 'res' is not
        negative.
        (gnu_xfer_partial): Likewise.
        * ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
        (ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
        (ia64_hpux_xfer_solib_got): Likewise.
        * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.  Change
        type of 'partial_len' to ULONGEST.
        * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
        * linux-nat.c (linux_xfer_siginfo ): Likewise.
        (linux_nat_xfer_partial): Likewise.
        (linux_proc_xfer_partial, linux_xfer_partial): Likewise.
        (linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
        * monitor.c (monitor_xfer_memory): Likewise.
        (monitor_xfer_partial): Likewise.
        * procfs.c (procfs_xfer_partial): Likewise.
        * record-btrace.c (record_btrace_xfer_partial): Likewise.
        * record-full.c (record_full_xfer_partial): Likewise.
        (record_full_core_xfer_partial): Likewise.
        * remote-sim.c (gdbsim_xfer_memory): Likewise.
        (gdbsim_xfer_partial): Likewise.
        * remote.c (remote_write_bytes_aux): Likewise.  All callers
        updated.
        (remote_write_bytes, remote_read_bytes): Likewise.  All
        callers updated.
        (remote_flash_erase): Likewise.  All callers updated.
        (remote_write_qxfer): Likewise.  All callers updated.
        (remote_read_qxfer): Likewise.  All callers updated.
        (remote_xfer_partial): Likewise.
        * rs6000-nat.c (rs6000_xfer_partial): Likewise.
        (rs6000_xfer_shared_libraries): Likewise.
        * sol-thread.c (sol_thread_xfer_partial): Likewise.
        (sol_thread_xfer_partial): Likewise.
        * sparc-nat.c (sparc_xfer_wcookie): Likewise.
        (sparc_xfer_partial): Likewise.
        * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.  All callers
        updated.
        (spu_xfer_partial): Likewise.
        * spu-multiarch.c (spu_xfer_partial): Likewise.
        * tracepoint.c (tfile_xfer_partial): Likewise.
        * windows-nat.c (windows_xfer_memory): Likewise.
        (windows_xfer_shared_libraries): Likewise.
        (windows_xfer_partial): Likewise.
        * valprint.c: Replace 'target_xfer_error' with
        'target_xfer_status' in comments.

2014-02-11  Simon Marchi  <simon.marchi@ericsson.com>  (tiny patch)

        Checked in by Joel Brobecker <brobecker@adacore.com>.
        * mi/mi-main.c (mi_cmd_data_write_memory_bytes): Fix comment.

2014-02-11  Joel Brobecker  <brobecker@adacore.com>

        * symfile-debug.c (debug_qf_expand_symtabs_matching): Reformat
        function parameters.

2014-02-10  Will Newton  <will.newton@linaro.org>

        * elfread.c (elf_rel_plt_read): Look for a .got section if
        looking up .got.plt fails.
        (elf_gnu_ifunc_resolve_by_got): Call gdbarch_addr_bits_remove
        on address passed to elf_gnu_ifunc_record_cache.
        (elf_gnu_ifunc_resolve_addr): Likewise.
        (elf_gnu_ifunc_resolver_return_stop): Likewise.

2014-02-10  Jose E. Marchesi  <jose.marchesi@oracle.com>

        * sparc-tdep.c (sparc_in_function_epilogue_p): New function.
        (X_RETTURN): New macro.
        * sparc-tdep.h: sparc_in_function_epilogue_p prototype.

        * sparc64-tdep.c (sparc64_init_abi): Hook
        sparc_in_function_epilogue_p.

2014-02-10  Gary Benson  <gbenson@redhat.com>

        * symfile-debug.c (debug_qf_expand_symtabs_matching):
        Rename name_matcher to symbol_matcher.

2014-02-10  Gary Benson  <gbenson@redhat.com>

        * symfile-debug.c (debug_qf_expand_symtabs_matching):
        Use expand_symtabs_file_matcher_ftype and
        expand_symtabs_symbol_matcher_ftype.

2014-02-10  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (struct cache_entry, HASH_SIZE): Move definition up.
        (struct ada_symbol_cache): New.
        (ada_free_symbol_cache): Forward declare.
        (struct ada_pspace_data): New.
        (ada_pspace_data_handle): New static global.
        (get_ada_pspace_data, ada_pspace_data_cleanup)
        (ada_init_symbol_cache, ada_free_symbol_cache): New functions.
        (cache_space, cache): Delete, now folded inside struct
        ada_pspace_data.
        (ada_get_symbol_cache): New function.
        (ada_clear_symbol_cache, find_entry, cache_symbol): Adjust
        implementation.
        (_initialize_ada_language): Remove initialization of cache_space.
        Move call to observer_attach_inferior_exit up, grouping it
        with the other observer registrations inside this function.
        Rename command to be more general.  Add call to
        register_program_space_data_with_cleanup.

2014-02-10  Joel Brobecker  <brobecker@adacore.com>

        * ada-tasks.c (ada_tasks_new_objfile_observer): Renames
        ada_new_objfile_observer.
        (ada_tasks_normal_stop_observer): Renames ada_normal_stop_observer.
        (_initialize_tasks): Update uses of ada_new_objfile_observer
        and ada_tasks_normal_stop_observer.

2014-02-10  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_evaluate_subexp): Set the type of the value
        returned by the 'Length attribute to integer.

2014-02-10  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (_initialize_ada_language): Initialize
        cache_space obstack.

2014-02-10  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (HASH_SIZE): New macro.
        (struct cache_entry): New type.
        (cache_space, cache): New static globals.
        (ada_clear_symbol_cache, find_entry): New functions.
        (lookup_cached_symbol, cache_symbol): Implement.
        (ada_new_objfile_observer, ada_free_objfile_observer): New.
        (_initialize_ada_language): Attach ada_new_objfile_observer
        and ada_free_objfile_observer.

2014-02-10  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_add_block_symbols, add_defn_to_vec)
        (lookup_cached_symbol, ada_add_local_symbols): Add "const" to
        struct block * parameter.
        (ada_lookup_symbol_list_worker): Constify local variable "block".
        Remove cast which is no longer necessary.

2014-02-10  Doug Evans  <xdje42@gmail.com>

        Add Guile as an extension language.
        * NEWS: Mention Guile scripting.
        * Makefile.in (SUBDIR_GUILE_OBS): New variable.
        (SUBDIR_GUILE_SRCS, SUBDIR_GUILE_DEPS): New variables
        (SUBDIR_GUILE_LDFLAGS, SUBDIR_GUILE_CFLAGS): New variables.
        (INTERNAL_CPPFLAGS): Add GUILE_CPPFLAGS.
        (CLIBS): Add GUILE_LIBS.
        (install-guile): New rule.
        (guile.o): New rule.
        (scm-arch.o, scm-auto-load.o, scm-block.o): New rules.
        (scm-breakpoint.o, scm-disasm.o, scm-exception.o): New rules.
        (scm-frame.o, scm-iterator.o, scm-lazy-string.o): New rules.
        (scm-math.o, scm-objfile.o, scm-ports.o): New rules.
        (scm-pretty-print.o, scm-safe-call.o, scm-gsmob.o): New rules.
        (scm-string.o, scm-symbol.o, scm-symtab.o): New rules.
        (scm-type.o, scm-utils.o, scm-value.o): New rules.
        * configure.ac: New option --with-guile.
        * configure: Regenerate.
        * config.in: Regenerate.
        * auto-load.c: Remove #include "python/python.h".  Add #include
        "gdb/section-scripts.h".
        (source_section_scripts): Handle Guile scripts.
        (_initialize_auto_load): Add name of Guile objfile script to
        scripts-directory help text.
        * breakpoint.c (condition_command): Tweak comment to include Scheme.
        * breakpoint.h (gdbscm_breakpoint_object): Add forward decl.
        (struct breakpoint): New member scm_bp_object.
        * defs.h (enum command_control_type): New value guile_control.
        * cli/cli-cmds.c: Remove #include "python/python.h".  Add #include
        "extension.h".
        (show_user): Update comment.
        (_initialize_cli_cmds): Update help text for "show user".  Update help
        text for max-user-call-depth.
        * cli/cli-script.c: Remove #include "python/python.h".  Add #include
        "extension.h".
        (multi_line_command_p): Add guile_control.
        (print_command_lines): Handle guile_control.
        (execute_control_command, recurse_read_control_structure): Ditto.
        (process_next_line): Recognize "guile" commands.
        * disasm.c (gdb_disassemble_info): Make non-static.
        * disasm.h: #include "dis-asm.h".
        (struct gdbarch): Add forward decl.
        (gdb_disassemble_info): Declare.
        * extension.c: #include "guile/guile.h".
        (extension_languages): Add guile.
        (get_ext_lang_defn): Handle EXT_LANG_GDB.
        * extension.h (enum extension_language): New value EXT_LANG_GUILE.
        * gdbtypes.c (get_unsigned_type_max): New function.
        (get_signed_type_minmax): New function.
        * gdbtypes.h (get_unsigned_type_max): Declare.
        (get_signed_type_minmax): Declare.
        * guile/README: New file.
        * guile/guile-internal.h: New file.
        * guile/guile.c: New file.
        * guile/guile.h: New file.
        * guile/scm-arch.c: New file.
        * guile/scm-auto-load.c: New file.
        * guile/scm-block.c: New file.
        * guile/scm-breakpoint.c: New file.
        * guile/scm-disasm.c: New file.
        * guile/scm-exception.c: New file.
        * guile/scm-frame.c: New file.
        * guile/scm-gsmob.c: New file.
        * guile/scm-iterator.c: New file.
        * guile/scm-lazy-string.c: New file.
        * guile/scm-math.c: New file.
        * guile/scm-objfile.c: New file.
        * guile/scm-ports.c: New file.
        * guile/scm-pretty-print.c: New file.
        * guile/scm-safe-call.c: New file.
        * guile/scm-string.c: New file.
        * guile/scm-symbol.c: New file.
        * guile/scm-symtab.c: New file.
        * guile/scm-type.c: New file.
        * guile/scm-utils.c: New file.
        * guile/scm-value.c: New file.
        * guile/lib/gdb.scm: New file.
        * guile/lib/gdb/boot.scm: New file.
        * guile/lib/gdb/experimental.scm: New file.
        * guile/lib/gdb/init.scm: New file.
        * guile/lib/gdb/iterator.scm: New file.
        * guile/lib/gdb/printing.scm: New file.
        * guile/lib/gdb/types.scm: New file.
        * data-directory/Makefile.in (GUILE_SRCDIR): New variable.
        (VPATH): Add $(GUILE_SRCDIR).
        (GUILE_DIR): New variable.
        (GUILE_INSTALL_DIR, GUILE_FILES): New variables.
        (all): Add stamp-guile dependency.
        (stamp-guile): New rule.
        (clean-guile, install-guile, uninstall-guile): New rules.
        (install-only): Add install-guile dependency.
        (uninstall): Add uninstall-guile dependency.
        (clean): Add clean-guile dependency.

2014-02-09  Doug Evans  <xdje42@gmail.com>

        Revert this patch (which I approved, mea culpa).

        2014-02-08  Mark Kettenis  <kettenis@gnu.org>

        * Makefile.in (all-lib): Remove.
        ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target.

2014-02-09  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Fix Python stack corruption.
        * python/py-linetable.c (ltpy_get_pcs_for_line, ltpy_has_line): Use
        gdb_py_longest.

2014-02-08  Mark Kettenis  <kettenis@gnu.org>

        * Makefile.in (all-lib): Remove.
        ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target.

2014-02-07  Doug Evans  <dje@google.com>

        * extension-priv.h (extension_language_script_ops): Add comment.
        (extension_language_ops): Add comment.
        (active_ext_lang_state): Fix typo in comment.

2014-02-07  Pedro Alves  <palves@redhat.com>

        PR breakpoints/16292
        * infrun.c (handle_signal_stop) <signal arrives while stepping
        over a breakpoint>: Switch back to the stepping thread.

2014-02-07  Yao Qi  <yao@codesourcery.com>

        * target.c (target_xfer_partial): Return zero if LEN is zero.

2014-02-07  Yao Qi  <yao@codesourcery.com>

        * auxv.c (procfs_xfer_auxv): Replace -1 with TARGET_XFER_E_IO.
        (ld_so_xfer_auxv): Likewise.
        * bfd-target.c (target_bfd_xfer_partial): Likewise.
        * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
        * corelow.c (core_xfer_partial): Likewise.
        * ctf.c (ctf_xfer_partial): Likewise.
        * darwin-nat.c (darwin_read_dyld_info): Likewise.
        (darwin_xfer_partial): Likewise.
        * exec.c (exec_xfer_partial): Likewise.
        * gnu-nat.c (gnu_xfer_partial): Likewise.
        * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): Likewise.
        * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.
        * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
        * linux-nat.c (linux_xfer_siginfo): Likewise.
        (linux_proc_xfer_spu): Likewise.
        * procfs.c (procfs_xfer_partial): Likewise.
        * record-full.c (record_full_xfer_partial): Likewise.
        (record_full_core_xfer_partial): Likewise.
        * remote-sim.c (gdbsim_xfer_partial): Likewise.
        * remote.c (remote_write_qxfer): Likewise.
        (remote_write_qxfer, remote_read_qxfer): Likewise.
        (remote_xfer_partial): Likewise.
        * rs6000-nat.c (rs6000_xfer_partial): Likewise.
        (rs6000_xfer_shared_libraries): Likewise.
        * sparc-nat.c (sparc_xfer_wcookie): Likewise.
        * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
        (spu_xfer_partial): Likewise.
        * target.c (memory_xfer_partial_1): Likewise.
        * tracepoint.c (tfile_xfer_partial): Likewise.
        * windows-nat.c (windows_xfer_shared_libraries): Likewise.
        (windows_xfer_partial): Likewise.

2014-02-07  Yao Qi  <yao@codesourcery.com>

        * gdbarch.sh (core_xfer_shared_libraries): Returns ULONGEST.  Add
        comments.
        (core_xfer_shared_libraries_aix): Likewise.
        * gdbarch.c, gdbarch.h: Regenerated.
        * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries): Return
        ULONGEST.  Change 'len_avail' type to ULONGEST.
        * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
        * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
        declaration.
        (rs6000_aix_core_xfer_shared_libraries_aix): Return ULONGEST.

2014-02-07  Yao Qi  <yao@codesourcery.com>

        * corefile.c (memory_error): Get 'exception' from ERR and pass
        'exception' to throw_error.

2014-02-06  Doug Evans  <xdje42@gmail.com>

        * configure.ac (libpython checking): Remove all but python.o from
        CONFIG_OBS.  Remove all but python.c from CONFIG_SRCS.
        * configure: Regenerate.

        * Makefile.in (SFILES): Add extension.c.
        (HFILES_NO_SRCDIR): Add extension.h, extension-priv.h
        (COMMON_OBS): Add extension.o.
        * extension.h: New file.
        * extension-priv.h: New file.
        * extension.c: New file.

        * python/python-internal.h: #include "extension.h".
        (gdbpy_auto_load_enabled): Declare.
        (gdbpy_apply_val_pretty_printer): Declare.
        (gdbpy_apply_frame_filter): Declare.
        (gdbpy_preserve_values): Declare.
        (gdbpy_breakpoint_cond_says_stop): Declare.
        (gdbpy_breakpoint_has_cond): Declare.
        (void source_python_script_for_objfile): Delete.
        * python/python.c: #include "extension-priv.h".
        Delete inclusion of "observer.h".
        (extension_language_python): Moved here and renamed from
        script_language_python in py-auto-load.c.
        Redefined to be of type extension_language_defn.
        (python_extension_script_ops): New global.
        (python_extension_ops): New global.
        (struct python_env): New member previous_active.
        (restore_python_env): Call restore_active_ext_lang.
        (ensure_python_env): Call set_active_ext_lang.
        (gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static.
        New arg extlang.
        (gdbpy_set_quit_flag): Renamed from set_quit_flag, made static.
        New arg extlang.
        (gdbpy_check_quit_flag): Renamed from check_quit_flag, made static.
        New arg extlang.
        (gdbpy_eval_from_control_command): Renamed from
        eval_python_from_control_command, made static.  New arg extlang.
        (gdbpy_source_script) Renamed from source_python_script, made static.
        New arg extlang.
        (gdbpy_before_prompt_hook): Renamed from before_prompt_hook.  Change
        result to int.  New arg extlang.
        (gdbpy_source_objfile_script): Renamed from
        source_python_script_for_objfile, made static.  New arg extlang.
        (gdbpy_start_type_printers): Renamed from start_type_printers, made
        static.  New args extlang, extlang_printers.  Change result type to
        "void".
        (gdbpy_apply_type_printers): Renamed from apply_type_printers, made
        static.  New arg extlang.  Rename arg printers to extlang_printers
        and change type to ext_lang_type_printers *.
        (gdbpy_free_type_printers): Renamed from free_type_printers, made
        static.  Replace argument arg with extlang, extlang_printers.
        (!HAVE_PYTHON, eval_python_from_control_command): Delete.
        (!HAVE_PYTHON, source_python_script): Delete.
        (!HAVE_PYTHON, gdbpy_should_stop): Delete.
        (!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete.
        (!HAVE_PYTHON, start_type_printers): Delete.
        (!HAVE_PYTHON, apply_type_printers): Delete.
        (!HAVE_PYTHON, free_type_printers): Delete.
        (_initialize_python): Delete call to observer_attach_before_prompt.
        (finalize_python): Set/restore active extension language.
        (gdbpy_finish_initialization) Renamed from
        finish_python_initialization, made static.  New arg extlang.
        (gdbpy_initialized): New function.
        * python/python.h: #include "extension.h".  Delete #include
        "value.h", "mi/mi-cmds.h".
        (extension_language_python): Declare.
        (GDBPY_AUTO_FILE_NAME): Delete.
        (enum py_bt_status): Moved to extension.h and renamed to
        ext_lang_bt_status.
        (enum frame_filter_flags): Moved to extension.h.
        (enum py_frame_args): Moved to extension.h and renamed to
        ext_lang_frame_args.
        (finish_python_initialization): Delete.
        (eval_python_from_control_command): Delete.
        (source_python_script): Delete.
        (apply_val_pretty_printer): Delete.
        (apply_frame_filter): Delete.
        (preserve_python_values): Delete.
        (gdbpy_script_language_defn): Delete.
        (gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete.
        (start_type_printers, apply_type_printers, free_type_printers): Delete.

        * auto-load.c: #include "extension.h".
        (GDB_AUTO_FILE_NAME): Delete.
        (auto_load_gdb_scripts_enabled): Make public.  New arg extlang.
        (script_language_gdb): Delete, moved to extension.c and renamed to
        extension_language_gdb.
        (source_gdb_script_for_objfile): Delete.
        (auto_load_pspace_info): New member unsupported_script_warning_printed.
        (loaded_script): Change type of language member to
        struct extension_language_defn *.
        (init_loaded_scripts_info): Initialize
        unsupported_script_warning_printed.
        (maybe_add_script): Make static.  Change type of language arg to
        struct extension_language_defn *.
        (clear_section_scripts): Reset unsupported_script_warning_printed.
        (auto_load_objfile_script_1): Rewrite to use extension language API.
        (auto_load_objfile_script): Make public.  Remove support-compiled-in
        and auto-load-enabled checks, moved to auto_load_scripts_for_objfile.
        (source_section_scripts): Rewrite to use extension language API.
        (load_auto_scripts_for_objfile): Rewrite to use
        auto_load_scripts_for_objfile.
        (collect_matching_scripts_data): Change type of language member to
        struct extension_language_defn *.
        (auto_load_info_scripts): Change type of language arg to
        struct extension_language_defn *.
        (unsupported_script_warning_print): New function.
        (script_not_found_warning_print): Make static.
        (_initialize_auto_load): Rewrite construction of scripts-directory
        help.
        * auto-load.h (struct objfile): Add forward decl.
        (struct script_language): Delete.
        (struct auto_load_pspace_info): Add forward decl.
        (struct extension_language_defn): Add forward decl.
        (maybe_add_script): Delete.
        (auto_load_objfile_script): Declare.
        (script_not_found_warning_print): Delete.
        (auto_load_info_scripts): Update prototype.
        (auto_load_gdb_scripts_enabled): Declare.
        * python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from
        auto_load_python_scripts_enabled and made public.
        (script_language_python): Delete, moved to python.c.
        (gdbpy_script_language_defn): Delete.
        (info_auto_load_python_scripts): Update to use
        extension_language_python.

        * breakpoint.c (condition_command): Replace call to
        gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang.
        (bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop
        with call to breakpoint_ext_lang_cond_says_stop.
        * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed
        from gdbpy_should_stop.  Change result type to enum scr_bp_stop.
        New arg slang.  Return SCR_BP_STOP_UNSET if py_bp_object is NULL.
        (gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond.
        New arg slang.
        (local_setattro): Print name of extension language with existing
        stop condition.

        * valprint.c (val_print, value_print): Update to call
        apply_ext_lang_val_pretty_printer.
        * cp-valprint.c (cp_print_value): Update call to
        apply_ext_lang_val_pretty_printer.
        * python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON.
        (gdbpy_apply_val_pretty_printer): Renamed from
        apply_val_pretty_printer.  New arg extlang.
        (!HAVE_PYTHON, apply_val_pretty_printer): Delete.

        * cli/cli-cmds.c (source_script_from_stream): Rewrite to use
        extension language API.
        * cli/cli-script.c (execute_control_command): Update to call
        eval_ext_lang_from_control_command.

        * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use
        enum ext_lang_bt_status values.  Update call to
        apply_ext_lang_frame_filter.
        (mi_cmd_stack_list_locals): Ditto.
        (mi_cmd_stack_list_args): Ditto.
        (mi_cmd_stack_list_variables): Ditto.
        * mi/mi-main.c: Delete #include "python/python-internal.h".
        Add #include "extension.h".
        (mi_cmd_list_features): Replace reference to python internal variable
        gdb_python_initialized with call to ext_lang_initialized_p.

        * stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status.
        Update to use enum ext_lang_frame_args.  Update to call
        apply_ext_lang_frame_filter.
        * python/py-framefilter.c (extract_sym): Update to use enum
        ext_lang_bt_status.
        (extract_value, py_print_type, py_print_value): Ditto.
        (py_print_single_arg, enumerate_args, enumerate_locals): Ditto.
        (py_mi_print_variables, py_print_locals, py_print_args): Ditto.
        (py_print_frame): Ditto.
        (gdbpy_apply_frame_filter): Renamed from apply_frame_filter.
        New arg extlang.  Update to use enum ext_lang_bt_status.

        * top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to
        finish_python_initialization.  Replace with call to
        finish_ext_lang_initialization.

        * typeprint.c (do_free_global_table): Update to call
        free_ext_lang_type_printers.
        (create_global_typedef_table): Update to call
        start_ext_lang_type_printers.
        (find_global_typedef): Update to call apply_ext_lang_type_printers.
        * typeprint.h (struct ext_lang_type_printers): Add forward decl.
        (type_print_options): Change type of global_printers from "void *"
        to "struct ext_lang_type_printers *".

        * value.c (preserve_values): Update to call preserve_ext_lang_values.
        * python/py-value.c: Remove #ifdef HAVE_PYTHON.
        (gdbpy_preserve_values): Renamed from preserve_python_values.
        New arg extlang.
        (!HAVE_PYTHON, preserve_python_values): Delete.

        * utils.c (quit_flag): Delete, moved to extension.c.
        (clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to
        extension.c.

        * eval.c: Delete #include "python/python.h".
        * main.c: Delete #include "python/python.h".

        * defs.h: Update comment.

2014-02-06  Joel Brobecker  <brobecker@adacore.com>

        GDB 7.7 released.

2014-02-05  Mark Kettenis  <kettenis@gnu.org>

        * c-exp.y (YYPRINT, c_print_token): Only define if YYBISON is
        defined.

2014-02-05  Yao Qi  <yao@codesourcery.com>

        * remote.c (remote_pass_signals): Remove local 'buf' and use
        rs->buf.
        (remote_program_signals): Likewise.

2014-02-05  Yao Qi  <yao@codesourcery.com>

        * ctf.c: Include "inferior.h" and "gdbthread.h".
        (CTF_PID): A new macro.
        (ctf_open): Call inferior_appeared and add_thread_silent.
        (ctf_close): Call exit_inferior_silent and set inferior_ptid.
        (ctf_thread_alive): New function.
        (init_ctf_ops): Install ctf_thread_alive to to_thread_alive.

2014-02-05  Yao Qi  <yao@codesourcery.com>

        Revert this patch:

        2013-05-24  Yao Qi  <yao@codesourcery.com>

        * tracepoint.c (TFILE_PID): Remove.
        (tfile_open): Don't add thread and inferior.
        (tfile_close): Don't set 'inferior_ptid'.  Don't call
        exit_inferior_silent.
        (tfile_thread_alive): Remove.
        (init_tfile_ops): Don't set field 'to_thread_alive' of
        tfile_ops.

2014-02-04  Christian Eggers  <ceggers@gmx.de>  (tiny change)

        * remote.c (remote_start_remote): Call remote_check_symbols even
        if only symbol-file (not file) has been given.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh (skip_entrypoint): New callback.
        * gdbarch.c, gdbarch.h: Regenerate.
        * symtab.c (skip_prologue_sal): Call gdbarch_skip_entrypoint.
        * infrun.c (fill_in_stop_func): Likewise.
        * ppc-linux-tdep.c: Include "elf/ppc64.h".
        (ppc_elfv2_elf_make_msymbol_special): New function.
        (ppc_elfv2_skip_entrypoint): Likewise.
        (ppc_linux_init_abi): Install them for ELFv2.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

        * ppc-sysv-tdep.c (ppc64_aggregate_candidate): New routine.
        (ppc64_elfv2_abi_homogeneous_aggregate): Likewise.
        (ppc64_sysv_abi_push_param): Handle ELFv2 homogeneous structs.
        (ppc64_sysv_abi_return_value): Likewise.  Also, handle small
        structures returned in GPRs.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

        * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Use correct
        offset to the stack parameter list for the ELFv2 ABI.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

        * ppc-linux-tdep.c (ppc_linux_init_abi): Only call
        set_gdbarch_convert_from_func_ptr_addr and
        set_gdbarch_elf_make_msymbol_special for ELFv1.
        * ppc-sysv-tdep.c (ppc64_sysv_abi_push_param): Only handle
        function descriptors on ELFv1.
        (ppc64_sysv_abi_push_dummy_call): Likewise.  On ELFv2,
        set up r12 at function entry.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

        * ppc-tdep.h (enum powerpc_elf_abi): New data type.
        (struct gdbarch_tdep): New member elf_abi.

        * rs6000-tdep.c: Include "elf/ppc64.h".
        (rs6000_gdbarch_init): Detect ELF ABI version.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

        * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order
        within a register pair holding a DFP 128-bit value on little-endian.
        (ppc64_sysv_abi_return_value_base): Likewise.
        * rs6000-tdep.c (dfp_pseudo_register_read): Likewise.
        (dfp_pseudo_register_write): Likewise.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

        * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct
        offset on little-endian when passing _Decimal32.
        (ppc64_sysv_abi_return_value_base): Likewise for return values.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

        * rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
        of the overlapped FP register within the VSX register on little-
        endian platforms.
        (efpr_pseudo_register_write): Likewise.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

        * ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct
        offset on little-endian when passing small structures.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

        * ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment.
        (struct ppc64_sysv_argpos): New data structure.
        (ppc64_sysv_abi_push_float): Remove.
        (ppc64_sysv_abi_push_val): New function.
        (ppc64_sysv_abi_push_integer): Likewise.
        (ppc64_sysv_abi_push_freg): Likewise.
        (ppc64_sysv_abi_push_vreg): Likewise.
        (ppc64_sysv_abi_push_param): Likewise.
        (ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines.
        (ppc64_sysv_abi_return_value_base): New function.
        (ppc64_sysv_abi_return_value): Refactor to use it.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

        * NEWS: Document new target powerpc64le-*-linux*.

2014-02-04  Mark Kettenis  <kettenis@gnu.org>

        * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable.
        (sparc64obsd_supply_gregset): Handle registers sets used in ELF
        core dumps.
        (sparc64obsd_init_abi): Adjust minimum size of the general purpose
        register set used in ELF core dumps.  Add floating-point register set.

2014-02-03  Kevin Buettner  <kevinb@redhat.com>

        * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite 
        dwarf2_to_gdb[] table using symbolic constants.  Adjust
        penultimate entry from number representing the PC register
        to symbolic constant representing the MDR register.  Add
        constant for the PC register to the end of the table.

2014-02-03  Mark Kettenis  <kettenis@gnu.org>

        * bsd-kvm.c: Include <sys/param.h>

2014-02-03  Mark Kettenis  <kettenis@gnu.org>

        * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype.

2014-01-31  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.h (clear_ada_sym_cache): Delete.

2014-01-30  Ulrich Weigand  <uweigand@de.ibm.com>

        * auxv.c (fprint_target_auxv): Handle AT_HWCAP2.

2014-01-29  Jose E. Marchesi  <jose.marchesi@oracle.com>

        * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
          the sigreturn register save area only if the syscall is
          sigreturn.

2014-01-29  Joel Brobecker  <brobecker@adacore.com>

        * valops.c (value_slice): Minor reformatting.

2014-01-28  Ulrich Weigand  <uweigand@de.ibm.com>

        * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo.

2014-01-28  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
        New static globals.
        (maint_set_ada_cmd, maint_show_ada_cmd): New functions.
        (ada_ignore_descriptive_types_p): New static global.
        (find_parallel_type_by_descriptive_type): Return immediately
        if ada_ignore_descriptive_types_p is set.
        (_initialize_ada_language): Register new commands "maintenance
        set ada", "maintenance show ada", "maintenance set ada
        ignore-descriptive-types" and "maintenance show ada
        ignore-descriptive-types".
        * NEWS: Add entry for new "maint ada set/show
        ignore-descriptive-types" commands.

2014-01-27  Markus Metzger  <markus.t.metzger@intel.com>

        * record-btrace.c (record_btrace_close): Call btrace_teardown
        for all threads.

2014-01-27  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c: Remove "#ifdef UI_OUT" condition for including
        "ui-out.h".

2014-01-27  Joel Brobecker  <brobecker@adacore.com>

        * ada-typeprint (type_is_full_subrange_of_target_type):
        New function.
        (print_range): Add parameter bounds_prefered_p.  If not set,
        try printing range types using the name of their base type.
        (print_range_type): Add parameter bounds_prefered_p.
        Use it in call to print_range.
        (print_array_type, ada_print_type): Update calls to print_range
        and print_range_type.

2014-01-27  Joel Brobecker  <brobecker@adacore.com>

        * ada-typeprint.c (print_array_type, print_choices, print_range)
        (print_range_bound, print_dynamic_range_bound, print_range_type):
        Remove declaration.

2014-01-27  Joel Brobecker  <brobecker@adacore.com>

        * ada-typeprint.c (print_range): Add missing empty line
        after local declaration.

2014-01-27  Joel Brobecker  <brobecker@adacore.com>

        * ada-valprint.c (print_optional_low_bound): Get index_type's
        target type for as long as it is a TYPE_CODE_RANGE.

2014-01-27  Joel Brobecker  <brobecker@adacore.com>

        * procfs.c (procfs_make_note_section): Remove assertion and
        associated comment.

2014-01-24  Yao Qi  <yao@codesourcery.com>

        * remote.c (remote_read_bytes): Change type of len to ULONGEST.
        * corelow.c (get_core_siginfo): Likewise.

2014-01-24  Yao Qi  <yao@codesourcery.com>

        * remote.c (remote_write_bytes_aux): Change type of 'len' to
        ULONGEST.  Don't check 'len' is negative.
        (remote_write_bytes):  Change type of 'len' to ULONGEST.

2014-01-23  Tom Tromey  <tromey@redhat.com>

        PR python/16485:
        * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args):
        Handle exception from frame.block.
        (FrameVars.fetch_frame_locals): Likewise.

2014-01-23  Tom Tromey  <tromey@redhat.com>

        PR python/16487:
        * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF
        on a NULL pointer.  Move "goto error" to correct place.

2014-01-23  Tom Tromey  <tromey@redhat.com>

        PR python/16491:
        * python/py-framefilter.c (apply_frame_filter): Call
        ensure_python_env after computing gdbarch.

2014-01-23  Yao Qi  <yao@codesourcery.com>

        * target.c (raw_memory_xfer_partial): Change argument type
        from void * to gdb_byte *.
        (memory_xfer_partial_1, memory_xfer_partial): Likewise.

2014-01-22  Doug Evans  <dje@google.com>

        New gdbserver option --debug-format=timestamp.
        * NEWS: Mention it.

2014-01-22  Andreas Arnez  <arnez@vnet.linux.ibm.com>

        * syscalls/s390x-linux.xml: New file.
        * syscalls/s390-linux.xml: New file.
        * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
        (XML_SYSCALL_FILENAME_S390X): Likewise.
        (op_svc): New enum value for SVC opcode.
        (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
        (s390_linux_get_syscall_number): New function.
        (s390_gdbarch_init): Register '*get_syscall_number' and the
        syscall xml file name.
        * data-directory/Makefile.in (SYSCALLS_FILES): Add
        "s390-linux.xml" and "s390x-linux.xml".
        * NEWS: Announce new feature.

2014-01-22  Baruch Siach  <baruch@tkos.co.il>

        * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t.

2014-01-22  Pedro Alves  <palves@redhat.com>

        * xtensa-config.c: Include defs.h.

2014-01-22  Joel Brobecker  <brobecker@adacore.com>

        * common/common-utils.h: Add "ARI:" comment beside __func__
        reference.

2014-01-22  Joel Brobecker  <brobecker@adacore.com>

        * common/common-utils.h (FUNCTION_NAME): Expand the macro's
        documentation a bit.

2014-01-21  Roland McGrath  <mcgrathr@google.com>

        * configure.ac: Call AM_PROG_INSTALL_STRIP.
        * configure: Regenerate.
        * aclocal.m4: Regenerate.
        * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
        New substituted variables.
        (install-strip): New target.
        (INSTALL_SCRIPT): New substituted variable.
        (FLAGS_TO_PASS): Add it.
        (install-only): Use $(INSTALL_SCRIPT) rather than
        $(INSTALL_PROGRAM) for gcore.

2014-01-20  Tom Tromey  <tromey@redhat.com>

        * cli/cli-decode.h (struct cmd_list_element): Move all bitfields
        together.

2014-01-20  Tom Tromey  <tromey@redhat.com>

        * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd)
        (add_setshow_cmd_full, delete_cmd, lookup_cmd_1)
        (deprecated_cmd_warning, complete_on_cmdlist): Update.
        * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER)
        (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove.
        (struct cmd_list_element) <flags>: Remove.
        <cmd_deprecated, deprecated_warn_user, malloced_replacement,
        doc_allocated>: New fields.
        <hook_in, allow_unknown, abbrev_flag, type, var_type>: Now
        bitfields.
        * maint.c (maintenance_do_deprecate): Update.
        * top.c (execute_command): Update.

2014-01-20  Baruch Siach  <baruch@tkos.co.il>

        * xtensa-linux-nat.c: Include asm/ptrace.h.

2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>

        * Makefile.in (SFILES): Add d-support.c.
        (COMMON_OBS): Add d-support.o.
        * d-lang.h (d_parse_symbol): Add comment, now defined in
        d-support.c.
        * d-lang.c (parse_call_convention)
        (parse_attributes, parse_function_types)
        (parse_function_args, parse_type, parse_identifier)
        (call_convention_p, d_parse_symbol): Move functions to ...
        * d-support.c: ... New file.

2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>

        * d-lang.h (d_parse_symbol): Add declaration.
        * d-lang.c (extract_identifiers)
        (extract_type_info): Remove functions.
        (parse_call_convention, parse_attributes)
        (parse_function_types, parse_function_args)
        (parse_type, parse_identifier, call_convention_p)
        (d_parse_symbol): New functions.
        (d_demangle): Use d_parse_symbol to demangle D symbols.

2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>

        * d-lang.h (struct builtin_d_type): New data type.
        (builtin_d_type): Add declaration.
        * d-lang.c (d_language_arch_info, build_d_types)
        (builtin_d_type): New functions.
        (enum d_primitive_types): New data type.
        (d_language_defn): Change c_language_arch_info to
        d_language_arch_info.
        (d_type_data): New static variable.
        (_initialize_d_language): Initialize d_type_data.

2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>

        * d-lang.h (d_main_name): Add declaration.
        * d-lang.c (d_main_name): New function.
        * symtab.c (find_main_name): Add call to d_main_name.

2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>

        * d-lang.c (d_language_defn): Change macro_expansion_c to
        macro_expansion_no.

2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>

        * MAINTAINERS: Add myself as a write-after-approval maintainer.

2014-01-17  Sergio Durigan Junior  <sergiodj@redhat.com>

        * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct
        gdb_exception" declaration.
        * remote.c (getpkt_or_notif_sane): Likewise.

2014-01-17  Doug Evans  <dje@google.com>

        * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New
        function, contents of dirnames_to_char_ptr_vec_append moved here.
        (delim_string_to_char_ptr_vec): New function.
        (dirnames_to_char_ptr_vec_append): Rewrite.
        * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare.

2014-01-17  Doug Evans  <dje@google.com>

        * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION,
        and moved here ...
        * common/gdb_assert.h (ASSERT_FUNCTION): ... from here.
        #include "common-utils.h".
        (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update.
        * common/vec.h (VEC_ASSERT_PASS): Update.
        * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h.
        (MACH_CHECK_ERROR): Update.

2014-01-17  Simon Marchi  <simon.marchi@ericsson.com>

        * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add
        comments.
        * gdbarch.h: Regenerate.

2014-01-16  Tom Tromey  <tromey@redhat.com>

        * value.c (struct value) <regnum>: Move earlier.

2014-01-16  Tom Tromey  <tromey@redhat.com>

        * remote.c (extended_remote_create_inferior): Rename from
        extended_remote_create_inferior_1.  Add "ops" argument.  Remove
        old implementation.

2014-01-16  Pedro Alves  <palves@redhat.com>

        * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
        NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
        the backchain.

2014-01-16  Doug Evans  <dje@google.com>

        * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * btrace.h (btrace_thread_flag): New.
        (struct btrace_thread_info) <flags>: New.
        * record-btrace.c (record_btrace_resume_thread)
        (record_btrace_find_thread_to_move, btrace_step_no_history)
        (btrace_step_stopped, record_btrace_start_replaying)
        (record_btrace_step_thread, record_btrace_decr_pc_after_break)
        (record_btrace_find_resume_thread): New.
        (record_btrace_resume, record_btrace_wait): Extend.
        (record_btrace_can_execute_reverse): New.
        (record_btrace_open): Fail in non-stop mode.
        (record_btrace_set_replay): Split into this, ...
        (record_btrace_stop_replaying): ... this, ...
        (record_btrace_clear_histories): ... and this.
        (init_record_btrace_ops): Init to_can_execute_reverse.
        * NEWS: Announce it.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * target.h (struct target_ops) <to_decr_pc_after_break>: New.
        (forward_target_decr_pc_after_break)
        (target_decr_pc_after_break): New.
        * target.c (forward_target_decr_pc_after_break)
        (target_decr_pc_after_break): New.
        * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break
        instead of gdbarch_decr_pc_after_break.
        * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
        instead of gdbarch_decr_pc_after_break.
        * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break
        instead of gdbarch_decr_pc_after_break.
        * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
        instead of gdbarch_decr_pc_after_break.
        * linux-thread-db.c (check_event): Call target_decr_pc_after_break
        instead of gdbarch_decr_pc_after_break.
        * record-full.c (record_full_wait_1): Call target_decr_pc_after_break
        instead of gdbarch_decr_pc_after_break.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * btrace.c: Include regcache.h.
        (btrace_add_pc): New.
        (btrace_enable): Call btrace_add_pc.
        (btrace_is_empty): New.
        * btrace.h (btrace_is_empty): New.
        * record-btrace.c (require_btrace, record_btrace_info): Call
        btrace_is_empty.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
        Support delta reads.
        (linux_disable_btrace): Change return type.
        * common/linux-btrace.h (linux_read_btrace): Change parameters
        and return type to allow error reporting.  Update users.
        (linux_disable_btrace): Change return type.  Update users.
        * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
        New.
        (btrace_error): New.
        (btrace_block) <begin>: Comment on BEGIN == 0.
        * btrace.c (btrace_compute_ftrace): Start from the end of
        the current trace.
        (btrace_stitch_trace, btrace_clear_history): New.
        (btrace_fetch): Read delta trace, return if replaying.
        (btrace_clear): Move clear history code to btrace_clear_history.
        (parse_xml_btrace): Throw an error if parsing failed.
        * target.h (struct target_ops) <to_read_btrace>: Change parameters
        and return type to allow error reporting.
        (target_read_btrace): Change parameters and return type to allow
        error reporting.
        * target.c (target_read_btrace): Update.
        * remote.c (remote_read_btrace): Support delta reads.  Pass
        errors on.
        * NEWS: Announce it.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * record.h (record_btrace_frame_unwind)
        (record_btrace_tailcall_frame_unwind): New declarations.
        * dwarf2-frame: Include record.h
        (dwarf2_frame_cfa): Throw an error for btrace frames.
        * record-btrace.c: Include hashtab.h.
        (btrace_get_bfun_name): New.
        (btrace_call_history): Call btrace_get_bfun_name.
        (struct btrace_frame_cache): New.
        (bfcache): New.
        (bfcache_hash, bfcache_eq, bfcache_new): New.
        (btrace_get_frame_function): New.
        (record_btrace_frame_unwind_stop_reason): Allow unwinding.
        (record_btrace_frame_this_id): Compute own id.
        (record_btrace_frame_prev_register): Provide PC, throw_error
        for all other registers.
        (record_btrace_frame_sniffer): Detect btrace frames.
        (record_btrace_tailcall_frame_sniffer): New.
        (record_btrace_frame_dealloc_cache): New.
        (record_btrace_frame_unwind): Add new functions.
        (record_btrace_tailcall_frame_unwind): New.
        (_initialize_record_btrace): Allocate cache.
        * btrace.c (btrace_clear): Call reinit_frame_cache.
        * NEWS: Announce it.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * record-btrace.c (record_btrace_set_replay)
        (record_btrace_goto_begin, record_btrace_goto_end)
        (record_btrace_goto): New.
        (init_record_btrace_ops): Initialize them.
        * NEWS: Announce it.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * record-btrace.c (record_btrace_find_new_threads)
        (record_btrace_thread_alive): New.
        (init_record_btrace_ops): Initialize to_find_new_threads and
        to_thread_alive.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * record-btrace.c (record_btrace_resume): New.
        (record_btrace_wait): New.
        (init_record_btrace_ops): Initialize to_wait and to_resume.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * record-btrace.c (record_btrace_xfer_partial)
        (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint)
        (record_btrace_allow_memory_access): New.
        (init_record_btrace_ops): Initialize new methods.
        * target.c (raw_memory_xfer_partial): Bail out if target reports
        that this memory is not available.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * target.h (target_ops) <to_insert_breakpoint>
        <to_remove_breakpoint>: Add target_ops parameter.
        (forward_target_insert_breakpoint): New.
        (forward_target_remove_breakpoint): New.
        (memory_remove_breakpoint, memory_insert_breakpoint):
        Add target_ops parameter.
        * target.c (target_insert_breakpoint): Split into this and ...
        (forward_target_insert_breakpoint): ... this.
        (target_remove_breakpoint): Split into this and ...
        (forward_target_remove_breakpoint): ... this.
        (debug_to_insert_breakpoint): Add target_ops parameter.
        Call forward_target_insert_breakpoint.
        (debug_to_remove_breakpoint): Add target_ops parameter.
        Call forward_target_remove_breakpoint.
        (update_current_target): Do not inherit or default to_insert_breakpoint
        and to_remove_breakpoint.
        * corelow.c (ignore): Add target_ops parameter.
        * exec.c (ignore): Add target_ops parameter.
        * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
        Add target_ops parameter.
        * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
        Add target_ops parameter.
        * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
        Add target_ops parameter.
        * record-full.c (record_full_beneath_to_insert_breakpoint)
        (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
        (tmp_to_remove_breakpoint, record_full_insert_breakpoint)
        (record_full_remove_breakpoint, record_full_core_insert_breakpoint)
        (record_full_core_remove_breakpoint): Add target_ops parameter.
        Update users.
        (record_full_beneath_to_insert_breakpoint_ops)
        (record_full_beneath_to_remove_breakpoint_ops)
        (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
        (record_full_open): Initialize tmp_to_insert_breakpoint_ops,
        tmp_to_remove_breakpoint_ops,
        record_full_beneath_to_insert_breakpoint_ops, and
        record_full_beneath_to_remove_breakpoint_ops.
        * remote-m32r-sdi.c (m32r_insert_breakpoint)
        (m32r_remove_breakpoint): Add target_ops parameter.
        * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
        Add target_ops parameter.
        * remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
        Add target_ops parameter.

2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
            Markus Metzger  <markus.t.metzger@intel.com>

        * record-btrace.c: Include frame-unwind.h.
        (record_btrace_frame_unwind_stop_reason)
        (record_btrace_frame_this_id, record_btrace_frame_prev_register)
        (record_btrace_frame_sniffer, record_btrace_frame_unwind):
        New.
        (init_record_btrace_ops): Install it.

2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * frame.c (get_frame_unwind_stop_reason): Unconditionally call
        get_prev_frame_1.

2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check
        earlier.

2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * frame-unwind.c: Include target.h.
        (frame_unwind_try_unwinder): New function with code from ...
        (frame_unwind_find_by_frame): ... here.  New variable
        unwinder_from_target, call also target_get_unwinder)
        (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
        * target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
        * target.h (struct target_ops): New fields to_get_unwinder and
        to_get_tailcall_unwinder.
        (target_get_unwinder, target_get_tailcall_unwinder): New declarations.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * record-btrace.c (record_btrace_fetch_registers)
        (record_btrace_store_registers)
        (record_btrace_to_prepare_to_store): New.
        (init_record_btrace_ops): Add the above.

2014-01-16  Tom Tromey  <tromey@redhat.com>

        * windows-nat.c (windows_prepare_to_store): Add 'self' argument.
        * target.h (struct target_ops) <to_prepare_to_store>: Add
        argument.
        (target_prepare_to_store): Add argument.
        * target.c (debug_to_prepare_to_store): Add argument.
        (update_current_target): Update.
        * remote.c (remote_prepare_to_store): Add 'self' argument.
        * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
        * remote-mips.c (mips_prepare_to_store): Add 'self' argument.
        * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
        * record-full.c (record_full_core_prepare_to_store): Add 'self'
        argument.
        * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
        * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
        * monitor.c (monitor_prepare_to_store): Add 'self' argument.
        * inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
        * go32-nat.c (go32_prepare_to_store): Add 'self' argument.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * btrace.h (replay) <replay>: New.
        (btrace_is_replaying): New.
        * btrace.c (btrace_clear): Free replay iterator.
        (btrace_is_replaying): New.
        * record-btrace.c (record_btrace_is_replaying): New.
        (record_btrace_info): Print insn number if replaying.
        (record_btrace_insn_history): Start at replay position.
        (record_btrace_call_history): Start at replay position.
        (init_record_btrace_ops): Init to_record_is_replaying.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * record-btrace.c (record_btrace_insn_history_range): Include
        end.
        (record_btrace_insn_history_from): Adjust range.
        (record_btrace_call_history_range): Include
        end.
        (record_btrace_call_history_from): Adjust range.
        * NEWS: Announce changes.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * record.h (enum record_print_flag)
        <record_print_indent_calls>: New.
        * record.c (get_call_history_modifiers): Recognize /c modifier.
        (_initialize_record): Document /c modifier.
        * record-btrace.c (btrace_call_history): Add btinfo parameter.
        Reorder fields.  Optionally indent the function name.  Update
        all users.
        * NEWS: Announce changes.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * btrace.c (ftrace_new_function): Start counting at one.
        * record-btrace.c (record_btrace_info): Adjust number of calls
        and insns.
        * NEWS: Announce it.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * record-btrace.c (btrace_call_history_insn_range): Print
        insn range as [begin, end].

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * btrace.h (struct btrace_func_link): New.
        (enum btrace_function_flag): New.
        (struct btrace_inst): Rename to ...
        (struct btrace_insn): ...this. Update all users.
        (struct btrace_func) <ibegin, iend>: Remove.
        (struct btrace_func_link): New.
        (struct btrace_func): Rename to ...
        (struct btrace_function): ...this. Update all users.
        (struct btrace_function) <segment, flow, up, insn, insn_offset)
        (number, level, flags>: New.
        (struct btrace_insn_iterator): Rename to ...
        (struct btrace_insn_history): ...this.
        Update all users.
        (struct btrace_insn_iterator, btrace_call_iterator): New.
        (struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
        (struct btrace_target_info) <begin, end, level>
        <insn_history, call_history>: New.
        (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
        (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
        (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
        (btrace_call_number, btrace_call_begin, btrace_call_end)
        (btrace_call_prev, btrace_call_next, btrace_call_cmp)
        (btrace_find_function_by_number, btrace_set_insn_history)
        (btrace_set_call_history): New.
        * btrace.c (btrace_init_insn_iterator)
        (btrace_init_func_iterator, compute_itrace): Remove.
        (ftrace_print_function_name, ftrace_print_filename)
        (ftrace_skip_file): Change
        parameter to const.
        (ftrace_init_func): Remove.
        (ftrace_debug): Use new btrace_function fields.
        (ftrace_function_switched): Also consider gaining and
        losing symbol information).
        (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
        (ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
        (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
        New.
        (ftrace_new_function): Move. Remove debug print.
        (ftrace_update_lines, ftrace_update_insns): New.
        (ftrace_update_function): Check for call, ret, and jump.
        (compute_ftrace): Renamed to ...
        (btrace_compute_ftrace): ...this. Rewritten to compute call
        stack.
        (btrace_fetch, btrace_clear): Updated.
        (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
        (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
        (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
        (btrace_call_number, btrace_call_begin, btrace_call_end)
        (btrace_call_prev, btrace_call_next, btrace_call_cmp)
        (btrace_find_function_by_number, btrace_set_insn_history)
        (btrace_set_call_history): New.
        * record-btrace.c (require_btrace): Use new btrace thread
        info fields.
        (record_btrace_info, btrace_insn_history)
        (record_btrace_insn_history, record_btrace_insn_history_range):
        Use new btrace thread info fields and new iterator.
        (btrace_func_history_src_line): Rename to ...
        (btrace_call_history_src_line): ...this. Use new btrace
        thread info fields.
        (btrace_func_history): Rename to ...
        (btrace_call_history): ...this. Use new btrace thread info
        fields and new iterator.
        (record_btrace_call_history, record_btrace_call_history_range):
        Use new btrace thread info fields and new iterator.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * frame.h (frame_id_build_unavailable_stack_special): New.
        * frame.c (frame_id_build_unavailable_stack_special): New.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
        (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
        (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
        to gdbarch.
        * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
        (i386_insn_is_jump, i386_jmp_p): New.
        (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
        insn_is_jump to gdbarch.
        * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
        * gdbarch.h: Regenerated.
        * gdbarch.c: Regenerated.
        * arch-utils.h (default_insn_is_call, default_insn_is_ret)
        (default_insn_is_jump): New.
        * arch-utils.c (default_insn_is_call, default_insn_is_ret)
        (default_insn_is_jump): New.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * common/btrace-common.h (btrace_read_type) <btrace_read_all>:
        Change to ...
        (btrace_read_type) <BTRACE_READ_ALL>: ... this.  Update users.
        (btrace_read_type) <btrace_read_new>: Change to ...
        (btrace_read_type) <BTRACE_READ_NEW>: ... this.  Update users.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * common/linux-btrace.c (linux_read_btrace): Free trace from
        previous iteration.

2014-01-15  Doug Evans  <dje@google.com>

        * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print
        uint32_t.

2014-01-15  Tom Tromey  <tromey@redhat.com>

        * dbxread.c (process_one_symbol): Use set_objfile_main_name.
        * dwarf2read.c (read_partial_die): Use set_objfile_main_name.
        * objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
        (set_objfile_main_name): New function.
        * objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
        language_of_main>: New fields.
        (set_objfile_main_name): Declare.
        * symtab.c (find_main_name): Loop over objfiles to find the main
        name and language.
        (set_main_name): Now static.
        (get_main_info): Add comment.
        * symtab.h (set_main_name): Don't declare.

2014-01-15  Tom Tromey  <tromey@redhat.com>

        * symtab.c (main_progspace_key): New global.
        (struct main_info): New.
        (name_of_main, language_of_main): Remove.
        (get_main_info, main_info_cleanup): New function.
        (set_main_name, main_name, main_language): Use get_main_info.
        (_initialize_symtab): Initialize main_progspace_key.

2014-01-15  Tom Tromey  <tromey@redhat.com>

        * dbxread.c (process_one_symbol): Update.
        * dwarf2read.c (read_partial_die): Update.
        * symfile.c (set_initial_language): Call main_language.
        * symtab.c (language_of_main): Now static.
        (set_main_name): Add 'lang' parameter.
        (find_main_name): Update.
        (main_language): New function.
        (symtab_observer_executable_changed): Update.
        * symtab.h (set_main_name): Update.
        (language_of_main): Remove.
        (main_language): Declare.

2014-01-15  Tom Tromey  <tromey@redhat.com>

        * symfile.c (init_entry_point_info): Use new "initialized" field.
        Update.
        * objfiles.h (struct entry_point) <initialized>: New field.
        (struct objfile_per_bfd_storage) <ei>: New field, moved from...
        (struct objfile) <ei>: ...here.  Remove.
        * objfiles.c (entry_point_address_query): Update.

2014-01-15  Tom Tromey  <tromey@redhat.com>

        * objfiles.c (entry_point_address_query): Relocate entry point
        address.
        (objfile_relocate1): Do not relocate entry point address.
        * objfiles.h (struct entry_info) <entry_point>: Update comment.
        <the_bfd_section_index>: New field.
        * symfile.c (init_entry_point_info): Find the entry point's
        section.

2014-01-15  Tom Tromey  <tromey@redhat.com>

        * solib-frv.c (enable_break): Use entry_point_address_query.

2014-01-15  Omair Javaid  <omair.javaid@linaro.org>

        * NEWS: Add note on improved process record-replay on
        arm*-linux* targets.

2014-01-15  Omair Javaid  <omair.javaid@linaro.org>

        * arm-tdep.c (enum arm_record_result): New enum.
        (arm_record_unsupported_insn): New function.
        (arm_record_coproc_data_proc): Removed.
        (thumb2_record_ld_st_multiple): New function.
        (thumb2_record_ld_st_dual_ex_tbb): New function.
        (thumb2_record_data_proc_sreg_mimm): New function.
        (thumb2_record_ps_dest_generic): New function.
        (thumb2_record_branch_misc_cntrl): New function.
        (thumb2_record_str_single_data): New function.
        (thumb2_record_ld_mem_hints): New function.
        (thumb2_record_ld_word): New function.
        (thumb2_record_lmul_lmla_div): New function.
        (thumb2_record_decode_insn_handler): New function.
        (decode_insn): Add thumb32 instruction handlers.

2014-01-15  Omair Javaid  <omair.javaid@linaro.org>

        * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h".
        (struct arm_linux_record_tdep): Declare.
        (arm_canonicalize_syscall): New function.
        (arm_all_but_pc_registers_record): New function.
        (arm_linux_syscall_record): New function.
        (arm_linux_init_abi): Add syscall recording constructs.
        * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall
        decoding.  (arm_record_coproc_data_proc): Update arm syscall
        decoding.
        * arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove.
        <arm_syscall_record>: New field.
        * configure.tgt (arm*-*-linux*): Add linux-record.o to
        gdb_target_obs.

2014-01-15  Omair Javaid  <omair.javaid@linaro.org>

        * arm-tdep.c (thumb_record_misc): Update to use sp as base
        register for push instruction recording.

2014-01-15  Omair Javaid  <omair.javaid@linaro.org>

        * arm-tdep.c (thumb_record_misc): Update to correct logical
        error while recording ldm, ldmia and pop instructions.

2014-01-15  Omair Javaid  <omair.javaid@linaro.org>

        * arm-tdep.c (struct arm_mem_r) <addr>: Change type to uint32_t.

2014-01-15  Pedro Alves  <palves@redhat.com>

        * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach)
        (go32_resume, go32_fetch_registers, store_register)
        (go32_store_registers, go32_prepare_to_store)
        (go32_xfer_memory, go32_files_info, go32_kill_inferior)
        (go32_create_inferior, go32_can_run, go32_terminal_init)
        (go32_terminal_inferior, go32_terminal_ours): Delete forward
        declarations.

2014-01-15  Tom Tromey  <tromey@redhat.com>

        * target.h (async_callback_ftype): New typedef.
        (struct target_ops) <to_async>: Use it.

2014-01-15  Joel Brobecker  <brobecker@adacore.com>

        * python/py-value.c (get_field_type): Remove unnecessary curly
        braces for single-statement if block.

2014-01-15  Joel Brobecker  <brobecker@adacore.com>

        * python/py-type.c (convert_field): Add missing empty line
        after declarations.

2014-01-14  Doug Evans  <dje@google.com>

        * symfile.h (expand_symtabs_matching): Renamed from
        expand_partial_symbol_names.  Update prototype.
        (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
        * symfile.c (expand_symtabs_matching): Renamed from
        expand_partial_symbol_names.  New args file_matcher, kind.
        Rename arg fun to symbol_matcher.
        (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
        * ada-lang.c (ada_complete_symbol_matcher): Renamed from
        ada_expand_partial_symbol_name.
        (ada_make_symbol_completion_list): Update to call
        expand_symtabs_matching.
        (ada_add_global_exceptions): Call expand_symtabs_matching.
        * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
        call map_symbol_filenames.
        * symtab.c (sources_info): Update to call map_symbol_filenames.
        (search_symbols): Call expand_symtabs_matching.
        (symbol_completion_matcher): Renamed from expand_partial_symbol_name.
        (default_make_symbol_completion_list_break_on): Update to call
        expand_symtabs_matching.
        (make_source_files_completion_list): Update to call
        map_symbol_filenames.

2014-01-14  Doug Evans  <dje@google.com>

        * symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
        (expand_symtabs_symbol_matcher_ftype): New typedef.
        (quick_symbol_functions.expand_symtabs_matching): Update to use.
        expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
        * symfile.c (expand_partial_symbol_names): Update to use
        expand_symtabs_symbol_matcher_ftype.
        * dwarf2read.c (dw2_expand_symtabs_matching): Update to use
        expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
        Arg name_matcher renamed to symbol_matcher.
        * psymtab.c (recursively_search_psymtabs): Update to use
        expand_symtabs_symbol_matcher_ftype.  Arg name_matcher renamed to
        sym_matcher.
        (expand_symtabs_matching_via_partial): Update to use
        expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
        Arg name_matcher renamed to symbol_matcher.

2014-01-14  Doug Evans  <dje@google.com>

        * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
        (map_partial_symbol_filenames): Ditto.
        * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
        (map_partial_symbol_filenames): Ditto.
        * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
        (map_partial_symbol_filenames): Ditto.
        * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
        (map_partial_symbol_filenames): Ditto.
        * symtab.c: Delete #include "psymtab.h".

2014-01-14  Pedro Alves  <palves@redhat.com>
            Tom Tromey  <tromey@redhat.com>

        * infrun.c (use_displaced_stepping): Use find_record_target
        instead of RECORD_IS_USED.
        (adjust_pc_after_break): Use record_full_is_used instead of
        RECORD_IS_USED.
        * record-btrace.c (record_btrace_open): Call record_preopen
        instead of checking RECORD_IS_USED.
        * record-full.c (record_full_shortname)
        (record_full_core_shortname): New globals.
        (record_full_is_used): New function.
        (find_full_open): Call record_preopen instead of checking
        RECORD_IS_USED.
        (init_record_full_ops): Set the target's shortname to
        record_full_shortname.
        (init_record_full_core_ops): Set the target's shortname to
        record_full_core_shortname.
        * record-full.h (record_full_is_used): Declare.
        * record.c (find_record_target): Make extern.
        (record_preopen): New function.
        * record.h (RECORD_IS_USED): Delete macro.
        (find_record_target, record_preopen): Declare functions.

2014-01-14  Yao Qi  <yao@codesourcery.com>

        * gdbarch.sh (core_xfer_shared_libraries): Change its argument
        'len''s type to ULONGEST.
        (core_xfer_shared_libraries_aix): Likewise.
        * gdbarch.c, gdbarch.h: Regenerated.
        * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
        Change type of 'len' to ULONGEST.
        * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
        (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.

2014-01-14  Yao Qi  <yao@codesourcery.com>

        * common/linux-osdata.c (linux_xfer_osdata_processes): Change
        type of 'len' to ULONGEST.
        (linux_xfer_osdata_processgroups): Likewise.
        (linux_xfer_osdata_threads): Likewise.
        (linux_xfer_osdata_fds): Likewise.
        (linux_xfer_osdata_isockets): Likewise.
        (linux_xfer_osdata_shm): Likewise.
        (linux_xfer_osdata_sem): Likewise.
        (linux_xfer_osdata_msg): Likewise.
        (linux_common_xfer_osdata): Likewise.
        (struct osdata_type) <getter>: Likewise.
        * common/linux-osdata.h (linux_common_xfer_osdata): Update
        the declaration.

2014-01-14  Yao Qi  <yao@codesourcery.com>

        * target.h (target_xfer_partial_ftype): Update.
        (struct target_ops) <to_xfer_partial>: Change 'len' type to
        ULONGEST.
        * aix-thread.c (aix_thread_xfer_partial): Change type of
        argument 'len' to ULONGEST.
        * auxv.c (procfs_xfer_auxv): Likewise.
        (ld_so_xfer_auxv): Likewise.
        (memory_xfer_auxv): Likewise.
        * bfd-target.c (target_bfd_xfer_partial): Likewise.
        * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
        * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
        * corelow.c (core_xfer_partial): Likewise.
        * ctf.c (ctf_xfer_partial): Likewise.
        * darwin-nat.c (darwin_read_write_inferior): Likewise.  Use
        '%u'.
        (darwin_read_dyld_info): Likewise.
        (darwin_xfer_partial): Likewise.
        * exec.c (section_table_xfer_memory_partial): Likewise.
        (exec_xfer_partial): Likewise.
        * exec.h (section_table_xfer_memory_partial): Update
        declaration.
        * gnu-nat.c (gnu_xfer_memory): Likewise.  Call pulongest
        instead of plongest.
        (gnu_xfer_partial): Likewise.
        * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
        (ia64_hpux_xfer_solib_got): Likewise.
        (ia64_hpux_xfer_partial): Likewise.
        * ia64-linux-nat.c (ia64_linux_xfer_partial):
        * inf-ptrace.c (inf_ptrace_xfer_partial):
        * inf-ttrace.c (inf_ttrace_xfer_partial):
        * linux-nat.c (linux_xfer_siginfo): Likewise.
        (linux_nat_xfer_partial): Likewise.
        (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
        (linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
        * monitor.c (monitor_xfer_memory): Likewise.
        (monitor_xfer_partial): Likewise.
        * procfs.c (procfs_xfer_partial): Likewise.
        * record-full.c (record_full_xfer_partial): Likewise.
        (record_full_core_xfer_partial): Likewise.
        * remote-sim.c (gdbsim_xfer_memory): Likewise.  Call pulongest
        instead of plongest.
        (gdbsim_xfer_partial): Likewise.
        * remote.c (remote_xfer_partial): Likewise.
        * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
        * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
        declaration.
        * rs6000-nat.c (rs6000_xfer_partial): Likewise.
        (rs6000_xfer_shared_libraries): Likewise.
        * sol-thread.c (sol_thread_xfer_partial): Likewise.
        * sparc-nat.c (sparc_xfer_wcookie): Likewise.
        (sparc_xfer_partial): Likewise.
        * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
        (spu_xfer_partial): Likewise.
        * spu-multiarch.c (spu_xfer_partial): Likewise.
        * target.c (target_read_live_memory): Likewise.
        (memory_xfer_live_readonly_partial): Likewise.
        (memory_xfer_partial, memory_xfer_partial_1): Likewise.
        (target_xfer_partial, default_xfer_partial): Likewise.
        (current_xfer_partial): Likewise.
        * tracepoint.c (tfile_xfer_partial): Likewise.
        * windows-nat.c (windows_xfer_memory): Likewise.  Call
        pulongest instead of plongest.
        (windows_xfer_partial): Likewise.
        (windows_xfer_shared_libraries): Likewise.

2014-01-14  Yao Qi  <yao@codesourcery.com>

        * rs6000-nat.c (rs6000_xfer_shared_libraries): Use
        target_xfer_partial_ftype.

2014-01-13  Siva Chandra Reddy  <sivachandra@google.com>

        PR python/15464
        PR python/16113
        * valops.c (value_struct_elt_bitpos): New function
        * py-type.c (convert_field): Set 'name' attribute of a gdb.Field
        object to 'None' if the field name is an empty string ("").
        * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
        attribute to look for a field when 'name' is 'None'.
        (get_field_type): New function

2014-01-13  Doug Evans  <dje@google.com>

        PR symtab/16426
        * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion.
        (try_open_dwop_file): Ditto.
        * gdb_bfd.c: #include "vec.h".
        (bfdp): New typedef.
        (struct gdb_bfd_data): New member included_bfds.
        (gdb_bfd_unref): Unref all included bfds.
        (gdb_bfd_record_inclusion): New function.
        * gdb_bfd.h (gdb_bfd_record_inclusion): Declare.

2014-01-13  Tom Tromey  <tromey@redhat.com>

        * gdbcore.h (deprecated_core_resize_section_table): Remove.

2014-01-13  Tom Tromey  <tromey@redhat.com>

        * defs.h (use_windows): Remove.
        * gdb.c (main): Update.
        * main.c (captured_main, gdb_main): Update.
        * main.h (struct captured_main_args) <use_windows>: Remove.
        * top.c (use_windows): Remove.

2014-01-13  Tom Tromey  <tromey@redhat.com>

        * defs.h (deprecated_flush_hook): Remove.

2014-01-13  Jan Kratochvil  <jan.kratochvil@redhat.com>

        PR threads/16216
        * linux-thread-db.c (try_thread_db_load): Add parameter
        check_auto_load_safe.  Move here the file_is_auto_load_safe call.
        (try_thread_db_load_from_pdir_1): Move it there from here.
        (try_thread_db_load_from_sdir): Update caller.
        (try_thread_db_load_from_dir): Move it there from here.

2014-01-13  Patrick Palka  <patrick@parcs.ath.cx>

        * regformats/regdat.sh: Always rewrite the register file.

2014-01-13  Pedro Alves  <palves@redhat.com>

        * Makefile.in (CHECK_HEADERS): New variable.
        (check-headers:): New rule.

2014-01-13  Tom Tromey  <tromey@redhat.com>

        * cli/cli-setshow.c (do_set_command): Update.
        * defs.h (deprecated_set_hook): Remove.
        * top.c (deprecated_set_hook): Remove.

2014-01-13  Pedro Alves  <palves@redhat.com>

        * tracepoint.c (tfile_fetch_registers): Don't infer the PC from
        the tracepoint if the PC is a pseudo-register.

2014-01-13  Tom Tromey  <tromey@redhat.com>

        * defs.h (XCALLOC): Remove.
        * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
        (print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
        * dwarf2loc.c (allocate_piece_closure): Likewise.
        * elfread.c (elf_symfile_segments): Likewise.
        (elf_symfile_segments): Likewise.
        * gdbtypes.c (copy_type_recursive): Likewise.
        * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
        * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
        * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
        XCALLOC.
        * mt-tdep.c (mt_gdbarch_init): Likewise.
        * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
        XCALLOC.
        * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
        * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
        * registry.c (registry_alloc_data): Likewise.
        * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
        * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
        * serial.c (serial_fdopen_ops): Likewise.
        * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
        XCALLOC.
        * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
        * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
        not XCALLOC.

2014-01-13  Tom Tromey  <tromey@redhat.com>

        * defs.h (XMALLOC): Remove.
        * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
        * bfin-tdep.c (bfin_gdbarch_init): Likewise.
        * cli-out.c (struct ui_out *): Likewise.
        * cli/cli-dump.c (add_dump_command): Likewise.
        (add_dump_command): Likewise.
        * complaints.c (get_complaints): Likewise.
        (find_complaint): Likewise.
        * dwarf2-frame.c (execute_cfa_program): Likewise.
        * dwarf2read.c (abbrev_table_read_table): Likewise.
        * gdbarch.sh: Likewise.
        * gdbarch.c: Rebuild.
        * inf-ttrace.c (inf_ttrace_add_page): Likewise.
        * interps.c (interp_new): Likewise.
        * lm32-tdep.c (lm32_gdbarch_init): Likewise.
        * m32r-tdep.c (m32r_gdbarch_init): Likewise.
        * mi/mi-console.c (mi_console_file_new): Likewise.
        * mi/mi-interp.c (mi_interpreter_init): Likewise.
        * mi/mi-out.c (mi_out_new): Likewise.
        * mi/mi-parse.c (mi_parse): Likewise.
        * microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
        * moxie-tdep.c (moxie_gdbarch_init): Likewise.
        * observer.c (xalloc_observer_list_node): Likewise.
        * regcache.c (regcache_xmalloc_1): Likewise.
        * reggroups.c (reggroup_new): Likewise.
        (_initialize_reggroup): Likewise.
        * registry.c (register_data_with_cleanup): Likewise.
        * remote.c (remote_notif_stop_alloc_reply): Likewise.
        * ser-base.c (serial_ttystate): Likewise.
        * ser-mingw.c (make_pipe_state): Likewise.
        * ser-pipe.c (pipe_open): Likewise.
        * serial.c (serial_open): Likewise.
        * sh64-tdep.c (sh64_gdbarch_init): Likewise.
        * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
        (tui_alloc_win_info): Likewise.
        (tui_add_content_elements): Likewise.
        * tui/tui-file.c (tui_file_new): Likewise.
        * tui/tui-out.c (tui_out_new): Likewise.
        * ui-file.c (mem_file_new): Likewise.
        * ui-out.c (push_level): Likewise.
        (make_cleanup_ui_out_end): Likewise.
        (append_header_to_list): Likewise.
        (ui_out_new): Likewise.
        * user-regs.c (user_reg_add_builtin): Likewise.

2014-01-13  Tom Tromey  <tromey@redhat.com>

        * defs.h (XZALLOC): Remove.
        * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
        * ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
        (get_ada_tasks_inferior_data): Likewise.
        * auto-load.c (get_auto_load_pspace_data): Likewise.
        * auxv.c (get_auxv_inferior_data): Likewise.
        * bfd-target.c (target_bfd_reopen): Likewise.
        * breakpoint.c (get_catch_syscall_inferior_data): Likewise.
        (deprecated_insert_raw_breakpoint): Likewise.
        * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
        * corelow.c (core_open): Likewise.
        * darwin-nat.c (darwin_check_new_threads): Likewise.
        (darwin_attach_pid): Likewise.
        * dummy-frame.c (dummy_frame_push): Likewise.
        * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
        * dwarf2loc.c (allocate_piece_closure): Likewise.
        * elfread.c (elf_symfile_segments): Likewise.
        * eval.c (ptrmath_type_p): Likewise.
        * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
        * gdbtypes.c (alloc_type_arch): Likewise.
        (alloc_type_instance): Likewise.
        * hppa-tdep.c (hppa_gdbarch_init): Likewise.
        * inf-child.c (inf_child_can_use_agent): Likewise.
        * inflow.c (get_inflow_inferior_data): Likewise.
        * infrun.c (save_infcall_suspend_state): Likewise.
        * jit.c (jit_reader_load): Likewise.
        (get_jit_objfile_data): Likewise.
        (get_jit_program_space_data): Likewise.
        (jit_object_open_impl): Likewise.
        (jit_symtab_open_impl): Likewise.
        (jit_block_open_impl): Likewise.
        (jit_frame_sniffer): Likewise.
        * linux-fork.c (add_fork): Likewise.
        * maint.c (make_command_stats_cleanup): Likewise.
        * objfiles.c (get_objfile_pspace_data): Likewise.
        * opencl-lang.c (struct lval_closure): Likewise.
        * osdata.c (osdata_start_osdata): Likewise.
        * progspace.c (new_address_space): Likewise.
        (add_program_space): Likewise.
        * remote-sim.c (get_sim_inferior_data): Likewise.
        * sh-tdep.c (sh_gdbarch_init): Likewise.
        * skip.c (Ignore): Likewise.
        (skip_delete_command): Likewise.
        * solib-aix.c (get_solib_aix_inferior_data): Likewise.
        (library_list_start_library): Likewise.
        (solib_aix_current_sos): Likewise.
        * solib-darwin.c (get_darwin_info): Likewise.
        (darwin_current_sos): Likewise.
        * solib-dsbt.c (get_dsbt_info): Likewise.
        * solib-ia64-hpux.c (new_so_list): Likewise.
        (ia64_hpux_get_solib_linkage_addr): Likewise.
        * solib-spu.c (append_ocl_sos): Likewise.
        (spu_current_sos): Likewise.
        * solib-svr4.c (get_svr4_info): Likewise.
        (svr4_keep_data_in_core): Likewise.
        (library_list_start_library): Likewise.
        (svr4_default_sos): Likewise.
        (svr4_read_so_list): Likewise.
        * solib-target.c (library_list_start_library): Likewise.
        (solib_target_current_sos): Likewise.
        * sparc-tdep.c (sparc32_gdbarch_init): Likewise.
        * symfile-debug.c (install_symfile_debug_logging): Likewise.
        * symfile.c (default_symfile_segments): Likewise.
        * target-descriptions.c (tdesc_data_init): Likewise.
        (tdesc_create_reg): Likewise.
        (struct tdesc_type *): Likewise.
        (tdesc_create_vector): Likewise.
        (tdesc_set_struct_size): Likewise.
        (struct tdesc_type *): Likewise.
        (tdesc_free_feature): Likewise.
        (tdesc_create_feature): Likewise.
        * windows-nat.c (windows_add_thread): Likewise.
        (windows_make_so): Likewise.
        * xml-support.c (gdb_xml_body_text): Likewise.
        (gdb_xml_create_parser_and_cleanup): Likewise.
        (xml_process_xincludes): Likewise.
        * xml-syscall.c (allocate_syscalls_info): Likewise.
        (syscall_create_syscall_desc): Likewise.

2014-01-12  Sergio Durigan Junior  <sergiodj@redhat.com>

        * i386-tdep.c (i386_stap_parse_special_token_triplet): New
        function, with code from i386_stap_parse_special_token.
        (i386_stap_parse_special_token_three_arg_disp): Likewise.
        (i386_stap_parse_special_token): Move code to the two functions
        above; simplify it.

2014-01-09  Pedro Alves  <palves@redhat.com>
            Hui Zhu  <hui@codesourcery.com>

        PR gdb/16101
        * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
        bp_err_string.  Don't mark the location shlib_disabled if the
        error thrown wasn't a generic or memory error.  Catch errors
        thrown while inserting breakpoints in overlayed code.  Output
        error message of software breakpoints.
        * remote.c (remote_insert_breakpoint): If this breakpoint has
        target-side commands but this stub doesn't support Z0 packets,
        throw NOT_SUPPORTED_ERROR error.
        * exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
        * target.h (target_insert_breakpoint): Extend comment.
        (target_insert_hw_breakpoint): Add comment.

2014-01-08  Pedro Alves  <palves@redhat.com>

        * remote.c (remote_add_thread): Add threads silently if starting
        up.
        (remote_notice_new_inferior): If in all-stop, and starting up,
        don't call notice_new_inferior.
        (get_current_thread): New function, factored out from ...
        (add_current_inferior_and_thread): ... this.  Adjust.
        (remote_start_remote) <all-stop>: Fetch the thread list.  If we
        found any thread, then select the remote's current thread as GDB's
        current thread too.

2014-01-08  Joel Brobecker  <brobecker@adacore.com>

        * NEWS: Create a new section for the next release branch.
        Rename the section of the current branch, now that it has
        been cut.

2014-01-08  Joel Brobecker  <brobecker@adacore.com>

        GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5):
        * version.in: Bump version to 7.7.50.DATE-cvs.

2014-01-08  Yao Qi  <yao@codesourcery.com>

        * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
        type of 'id' to gdb_byte.  Cast 'id' to 'const char *'.
        (spu_xfer_partial): Cast 'buf' to 'const char *'.

2014-01-08  Yao Qi  <yao@codesourcery.com>

        * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
        return value of bfd_get_filename to symbol_file_add_from_bfd.

2014-01-08  Pierre Muller  <muller@sourceware.org>

        Fix PR16201.
        * coff-pe-read.c (struct read_pe_section_data): Add index field.
        (add_pe_exported_sym): Use SECTION_DATA->INDEX for call
        to prim_record_mininal_symbol_and_info.
        (add_pe_forwarded_sym): Use known section number of forwarded symbol
        in call to prim_record_minimal_symbol_and_info.
        (read_pe_exported_syms): Set index field of section_data.

2014-01-07  Andrew Pinski  <apinski@cavium.com>

        * features/aarch64-core.xml (cpsr): Change to be 64bit.
        * features/aarch64.c: Regenerate.

2014-01-07  Andreas Schwab  <schwab@linux-m68k.org>

        * target.c (return_null): Define.
        (update_current_target): Use it instead of return_zero for
        functions that return a pointer.

2014-01-07  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>

        * source.c (add_path): Fix check for duplicated paths in the previously
        included paths.

2014-01-07  Honggyu Kim  <hong.gyu.kim@lge.com>

        * ada-lang.c: Remove duplicated include statements.
        * alphabsd-nat.c: Ditto.
        * amd64-darwin-tdep.c: Ditto.
        * amd64fbsd-nat.c: Ditto.
        * auto-load.c: Ditto.
        * ax-gdb.c: Ditto.
        * breakpoint.c: Ditto.
        * dbxread.c: Ditto.
        * fork-child.c: Ditto.
        * gdb_usleep.c: Ditto.
        * i386-darwin-tdep.c: Ditto.
        * i386fbsd-nat.c: Ditto.
        * infcmd.c: Ditto.
        * inferior.c: Ditto.
        * jv-lang.c: Ditto.
        * linux-nat.c: Ditto.
        * linux-tdep.c: Ditto.
        * m68kbsd-nat.c: Ditto.
        * m68klinux-nat.c: Ditto.
        * microblaze-tdep.c: Ditto.
        * mips-linux-tdep.c: Ditto.
        * mn10300-tdep.c: Ditto.
        * nto-tdep.c: Ditto.
        * opencl-lang.c: Ditto.
        * osdata.c: Ditto.
        * printcmd.c: Ditto.
        * regcache.c: Ditto.
        * remote-m32r-sdi.c: Ditto.
        * remote.c: Ditto.
        * symfile.c: Ditto.
        * symtab.c: Ditto.
        * tilegx-linux-nat.c: Ditto.
        * tilegx-tdep.c: Ditto.
        * tracepoint.c: Ditto.
        * valops.c: Ditto.
        * vaxbsd-nat.c: Ditto.
        * windows-nat.c: Ditto.
        * xtensa-tdep.c: Ditto.

2014-01-07  Yao Qi  <yao@codesourcery.com>

        * spu-linux-nat.c (_initialize_spu_nat): Declare.

2014-01-07  Yao Qi  <yao@codesourcery.com>
            Joel Brobecker  <brobecker@adacore.com>

        * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
        (pdc_write_regs): Likewise.
        (fetch_regs_kernel_thread): Likewise.
        (store_regs_kernel_thread): Likewise.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

        * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
        tagged type objects to their actual type.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

        * ada-valprint.c (print_field_values): Add "language" parameter.
        Update calls to print_field_values and print_variant_part.
        Pass new parameter "language" in call to val_print instead
        of "current_language".  Replace call to ada_val_print by call
        to val_print.
        (print_variant_part): Add "language" parameter.
        (ada_val_print_struct_union): Update call to print_field_values.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

        * ada-valprint.c (ui_memcpy): Delete.
        (ada_print_floating): Update documentation.  Add empty line
        between between function documentation and implementation.
        Delete variable "buffer".  Use ui_file_xstrdup in place of
        ui_file_put.  Minor adjustments following this change.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

        * ada-valprint.c (ada_val_print_string): New function,
        extracted from ada_val_print_array.
        (ada_val_print_array): Replace extracted code by call
        to ada_val_print_string followed by a return.  Move
        "else" branch to the function's top block.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

        * ada-valprint.c (ada_val_print_array): Move implementation
        down.  Rename parameter "offset" and "val" into "offset_aligned"
        and "original_value" respectively.  Add parameter "offset".

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

        * ada-valprint.c (ada_val_print_ref): Rewrite by mostly
        re-organizing the code. Change the "???" message printed
        when target type is a TYPE_CODE_UNDEF into
        "<ref to undefined type>".

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

        * ada-valprint.c (print_record): Delete, implementation inlined...
        (ada_val_print_struct_union): ... here.  Remove call to
        ada_check_typedef in inlined implementation.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

        * ada-valprint.c (ada_val_print_gnat_array): New function,
        extracted from ada_val_print_1;
        (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
        (ada_val_print_flt, ada_val_print_struct_union)
        (ada_val_print_ref): Likewise.
        (ada_val_print_1): Delete variables i and elttype.
        Replace extracted-out code by call to corresponding
        new functions.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

        * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

        * ada-valprint.c (ada_val_print_1): Replace calls to
        ada_val_print_1 by calls to val_print.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

        * ada-valprint.c (ada_val_print_1): Add parameter "language".
        Update calls to self accordingly.  Replace calls to c_val_print
        by calls to val_print.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

        * ada-valprint.c (print_record): Delete declaration.
        (adjust_type_signedness, ada_val_print_1): Likewise.
        (ada_val_print): Move function implementation down.
        (print_variant_part, print_field_values, print_record):
        Move function implementation up.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

        * python/py-type.c (typy_get_name): New function.
        (type_object_getset): Add entry for attribute "name".
        * NEWS: Add entry mentioning this new attribute.

2014-01-07  Yao Qi  <yao@codesourcery.com>

        * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
        statement.

2014-01-07  Yao Qi  <yao@codesourcery.com>

        * gnu-nat.c (info_port_rights): Add qualifier const to
        argument args.

2014-01-07  Yao Qi  <yao@codesourcery.com>

        * gnu-nat.c (trace_me): Use 'void' for empty argument list.

2014-01-07  Yao Qi  <yao@codesourcery.com>

        * gnu-nat.c (make_inf) Update declaration.
        (make_inf): Make it static.
        (inf_set_traced): Likewise.
        (inf_port_to_thread, inf_task_died_status): Likewise.

2014-01-07  Yao Qi  <yao@codesourcery.com>

        * gnu-nat.c (inf_tid_to_proc): Remove declaration.

2014-01-07  Yao Qi  <yao@codesourcery.com>

        * gnu-nat.c (_initialize_gnu_nat): Declare.

2014-01-07  Yao Qi  <yao@codesourcery.com>

        * gdbarch.sh (byte_order, byte_order_for_code): Change type to
        'enum bfd_endian'.
        (struct gdbarch_info) <byte_order>: Change type to
        'enum bfd_endian'.
        <byte_order_for_code>: Likewise.
        * gdbarch.c, gdbarch.h: Regenerated.

2014-01-06  Sasha Smundak  <asmundak@google.com>

        * jit.c: (jit_reader_load_command): Fix JIT reader path creation.

2014-01-06  Tom Tromey  <tromey@redhat.com>

        * doublest.c (convert_doublest_to_floatformat): Use const, not
        CONST.
        * somread.c (som_symtab_read): Likewise.

2014-01-07  Hui Zhu  <hui@codesourcery.com>

        * gdb_bfd.c (gdb_bfd_stash_filename): Removed.
        (gdb_bfd_open): Removed gdb_bfd_stash_filename.
        (gdb_bfd_fopen): Ditto.
        (gdb_bfd_openr): Ditto.
        (gdb_bfd_openw): Ditto.
        (gdb_bfd_openr_iovec): Ditto.
        (gdb_bfd_fdopenr): Ditto.
        * gdb_bfd.h (gdb_bfd_stash_filename): Removed.
        * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
        with xstrdup.
        * solib-darwin.c (darwin_bfd_open): Alloc res->filename
        with xstrdup.
        * symfile-mem.c (symbol_file_add_from_memory): Removed
        gdb_bfd_stash_filename.

2014-01-03  Doug Evans  <dje@google.com>

        * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from
        output.

2014-01-01  Joel Brobecker  <brobecker@adacore.com>

        Update year range in copyright notice of all files.

2014-01-01  Joel Brobecker  <brobecker@adacore.com>

        * top.c (print_gdb_version): Set copyright year to 2014.

2014-01-01  Joel Brobecker  <brobecker@adacore.com>

        * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013.

For older changes see ChangeLog-2013.
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
coding: utf-8
End: