1 /* Search an insn for pseudo regs that must be in hard regs and are not.
2 Copyright (C) 1987, 88, 89, 92-97, 1998 Free Software Foundation, Inc.
4 This file is part of GNU CC.
6 GNU CC is free software; you can redistribute it and/or modify
7 it under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 2, or (at your option)
11 GNU CC is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 GNU General Public License for more details.
16 You should have received a copy of the GNU General Public License
17 along with GNU CC; see the file COPYING. If not, write to
18 the Free Software Foundation, 59 Temple Place - Suite 330,
19 Boston, MA 02111-1307, USA. */
22 /* This file contains subroutines used only from the file reload1.c.
23 It knows how to scan one insn for operands and values
24 that need to be copied into registers to make valid code.
25 It also finds other operands and values which are valid
26 but for which equivalent values in registers exist and
27 ought to be used instead.
29 Before processing the first insn of the function, call `init_reload'.
31 To scan an insn, call `find_reloads'. This does two things:
32 1. sets up tables describing which values must be reloaded
33 for this insn, and what kind of hard regs they must be reloaded into;
34 2. optionally record the locations where those values appear in
35 the data, so they can be replaced properly later.
36 This is done only if the second arg to `find_reloads' is nonzero.
38 The third arg to `find_reloads' specifies the number of levels
39 of indirect addressing supported by the machine. If it is zero,
40 indirect addressing is not valid. If it is one, (MEM (REG n))
41 is valid even if (REG n) did not get a hard register; if it is two,
42 (MEM (MEM (REG n))) is also valid even if (REG n) did not get a
43 hard register, and similarly for higher values.
45 Then you must choose the hard regs to reload those pseudo regs into,
46 and generate appropriate load insns before this insn and perhaps
47 also store insns after this insn. Set up the array `reload_reg_rtx'
48 to contain the REG rtx's for the registers you used. In some
49 cases `find_reloads' will return a nonzero value in `reload_reg_rtx'
50 for certain reloads. Then that tells you which register to use,
51 so you do not need to allocate one. But you still do need to add extra
52 instructions to copy the value into and out of that register.
54 Finally you must call `subst_reloads' to substitute the reload reg rtx's
55 into the locations already recorded.
59 find_reloads can alter the operands of the instruction it is called on.
61 1. Two operands of any sort may be interchanged, if they are in a
62 commutative instruction.
63 This happens only if find_reloads thinks the instruction will compile
66 2. Pseudo-registers that are equivalent to constants are replaced
67 with those constants if they are not in hard registers.
69 1 happens every time find_reloads is called.
70 2 happens only when REPLACE is 1, which is only when
71 actually doing the reloads, not when just counting them.
74 Using a reload register for several reloads in one insn:
76 When an insn has reloads, it is considered as having three parts:
77 the input reloads, the insn itself after reloading, and the output reloads.
78 Reloads of values used in memory addresses are often needed for only one part.
80 When this is so, reload_when_needed records which part needs the reload.
81 Two reloads for different parts of the insn can share the same reload
84 When a reload is used for addresses in multiple parts, or when it is
85 an ordinary operand, it is classified as RELOAD_OTHER, and cannot share
86 a register with any other reload. */
93 #include "insn-config.h"
94 #include "insn-codes.h"
98 #include "hard-reg-set.h"
105 #ifndef REGISTER_MOVE_COST
106 #define REGISTER_MOVE_COST(x, y) 2
109 #ifndef REGNO_MODE_OK_FOR_BASE_P
110 #define REGNO_MODE_OK_FOR_BASE_P(REGNO, MODE) REGNO_OK_FOR_BASE_P (REGNO)
113 #ifndef REG_MODE_OK_FOR_BASE_P
114 #define REG_MODE_OK_FOR_BASE_P(REGNO, MODE) REG_OK_FOR_BASE_P (REGNO)
117 /* The variables set up by `find_reloads' are:
119 n_reloads number of distinct reloads needed; max reload # + 1
120 tables indexed by reload number
121 reload_in rtx for value to reload from
122 reload_out rtx for where to store reload-reg afterward if nec
123 (often the same as reload_in)
124 reload_reg_class enum reg_class, saying what regs to reload into
125 reload_inmode enum machine_mode; mode this operand should have
126 when reloaded, on input.
127 reload_outmode enum machine_mode; mode this operand should have
128 when reloaded, on output.
129 reload_optional char, nonzero for an optional reload.
130 Optional reloads are ignored unless the
131 value is already sitting in a register.
132 reload_nongroup char, nonzero when a reload must use a register
133 not already allocated to a group.
134 reload_inc int, positive amount to increment or decrement by if
135 reload_in is a PRE_DEC, PRE_INC, POST_DEC, POST_INC.
136 Ignored otherwise (don't assume it is zero).
137 reload_in_reg rtx. A reg for which reload_in is the equivalent.
138 If reload_in is a symbol_ref which came from
139 reg_equiv_constant, then this is the pseudo
140 which has that symbol_ref as equivalent.
141 reload_reg_rtx rtx. This is the register to reload into.
142 If it is zero when `find_reloads' returns,
143 you must find a suitable register in the class
144 specified by reload_reg_class, and store here
145 an rtx for that register with mode from
146 reload_inmode or reload_outmode.
147 reload_nocombine char, nonzero if this reload shouldn't be
148 combined with another reload.
149 reload_opnum int, operand number being reloaded. This is
150 used to group related reloads and need not always
151 be equal to the actual operand number in the insn,
152 though it current will be; for in-out operands, it
153 is one of the two operand numbers.
154 reload_when_needed enum, classifies reload as needed either for
155 addressing an input reload, addressing an output,
156 for addressing a non-reloaded mem ref,
157 or for unspecified purposes (i.e., more than one
159 reload_secondary_p int, 1 if this is a secondary register for one
161 reload_secondary_in_reload
162 reload_secondary_out_reload
163 int, gives the reload number of a secondary
164 reload, when needed; otherwise -1
165 reload_secondary_in_icode
166 reload_secondary_out_icode
167 enum insn_code, if a secondary reload is required,
168 gives the INSN_CODE that uses the secondary
169 reload as a scratch register, or CODE_FOR_nothing
170 if the secondary reload register is to be an
171 intermediate register. */
174 rtx reload_in[MAX_RELOADS];
175 rtx reload_out[MAX_RELOADS];
176 enum reg_class reload_reg_class[MAX_RELOADS];
177 enum machine_mode reload_inmode[MAX_RELOADS];
178 enum machine_mode reload_outmode[MAX_RELOADS];
179 rtx reload_reg_rtx[MAX_RELOADS];
180 char reload_optional[MAX_RELOADS];
181 char reload_nongroup[MAX_RELOADS];
182 int reload_inc[MAX_RELOADS];
183 rtx reload_in_reg[MAX_RELOADS];
184 char reload_nocombine[MAX_RELOADS];
185 int reload_opnum[MAX_RELOADS];
186 enum reload_type reload_when_needed[MAX_RELOADS];
187 int reload_secondary_p[MAX_RELOADS];
188 int reload_secondary_in_reload[MAX_RELOADS];
189 int reload_secondary_out_reload[MAX_RELOADS];
190 enum insn_code reload_secondary_in_icode[MAX_RELOADS];
191 enum insn_code reload_secondary_out_icode[MAX_RELOADS];
193 /* All the "earlyclobber" operands of the current insn
194 are recorded here. */
196 rtx reload_earlyclobbers[MAX_RECOG_OPERANDS];
198 int reload_n_operands;
200 /* Replacing reloads.
202 If `replace_reloads' is nonzero, then as each reload is recorded
203 an entry is made for it in the table `replacements'.
204 Then later `subst_reloads' can look through that table and
205 perform all the replacements needed. */
207 /* Nonzero means record the places to replace. */
208 static int replace_reloads;
210 /* Each replacement is recorded with a structure like this. */
213 rtx *where; /* Location to store in */
214 rtx *subreg_loc; /* Location of SUBREG if WHERE is inside
215 a SUBREG; 0 otherwise. */
216 int what; /* which reload this is for */
217 enum machine_mode mode; /* mode it must have */
220 static struct replacement replacements[MAX_RECOG_OPERANDS * ((MAX_REGS_PER_ADDRESS * 2) + 1)];
222 /* Number of replacements currently recorded. */
223 static int n_replacements;
225 /* Used to track what is modified by an operand. */
228 int reg_flag; /* Nonzero if referencing a register. */
229 int safe; /* Nonzero if this can't conflict with anything. */
230 rtx base; /* Base address for MEM. */
231 HOST_WIDE_INT start; /* Starting offset or register number. */
232 HOST_WIDE_INT end; /* Ending offset or register number. */
235 /* MEM-rtx's created for pseudo-regs in stack slots not directly addressable;
236 (see reg_equiv_address). */
237 static rtx memlocs[MAX_RECOG_OPERANDS * ((MAX_REGS_PER_ADDRESS * 2) + 1)];
238 static int n_memlocs;
240 #ifdef SECONDARY_MEMORY_NEEDED
242 /* Save MEMs needed to copy from one class of registers to another. One MEM
243 is used per mode, but normally only one or two modes are ever used.
245 We keep two versions, before and after register elimination. The one
246 after register elimination is record separately for each operand. This
247 is done in case the address is not valid to be sure that we separately
250 static rtx secondary_memlocs[NUM_MACHINE_MODES];
251 static rtx secondary_memlocs_elim[NUM_MACHINE_MODES][MAX_RECOG_OPERANDS];
254 /* The instruction we are doing reloads for;
255 so we can test whether a register dies in it. */
256 static rtx this_insn;
258 /* Nonzero if this instruction is a user-specified asm with operands. */
259 static int this_insn_is_asm;
261 /* If hard_regs_live_known is nonzero,
262 we can tell which hard regs are currently live,
263 at least enough to succeed in choosing dummy reloads. */
264 static int hard_regs_live_known;
266 /* Indexed by hard reg number,
267 element is nonnegative if hard reg has been spilled.
268 This vector is passed to `find_reloads' as an argument
269 and is not changed here. */
270 static short *static_reload_reg_p;
272 /* Set to 1 in subst_reg_equivs if it changes anything. */
273 static int subst_reg_equivs_changed;
275 /* On return from push_reload, holds the reload-number for the OUT
276 operand, which can be different for that from the input operand. */
277 static int output_reloadnum;
279 /* Compare two RTX's. */
280 #define MATCHES(x, y) \
281 (x == y || (x != 0 && (GET_CODE (x) == REG \
282 ? GET_CODE (y) == REG && REGNO (x) == REGNO (y) \
283 : rtx_equal_p (x, y) && ! side_effects_p (x))))
285 /* Indicates if two reloads purposes are for similar enough things that we
286 can merge their reloads. */
287 #define MERGABLE_RELOADS(when1, when2, op1, op2) \
288 ((when1) == RELOAD_OTHER || (when2) == RELOAD_OTHER \
289 || ((when1) == (when2) && (op1) == (op2)) \
290 || ((when1) == RELOAD_FOR_INPUT && (when2) == RELOAD_FOR_INPUT) \
291 || ((when1) == RELOAD_FOR_OPERAND_ADDRESS \
292 && (when2) == RELOAD_FOR_OPERAND_ADDRESS) \
293 || ((when1) == RELOAD_FOR_OTHER_ADDRESS \
294 && (when2) == RELOAD_FOR_OTHER_ADDRESS))
296 /* Nonzero if these two reload purposes produce RELOAD_OTHER when merged. */
297 #define MERGE_TO_OTHER(when1, when2, op1, op2) \
298 ((when1) != (when2) \
299 || ! ((op1) == (op2) \
300 || (when1) == RELOAD_FOR_INPUT \
301 || (when1) == RELOAD_FOR_OPERAND_ADDRESS \
302 || (when1) == RELOAD_FOR_OTHER_ADDRESS))
304 /* If we are going to reload an address, compute the reload type to
306 #define ADDR_TYPE(type) \
307 ((type) == RELOAD_FOR_INPUT_ADDRESS \
308 ? RELOAD_FOR_INPADDR_ADDRESS \
309 : ((type) == RELOAD_FOR_OUTPUT_ADDRESS \
310 ? RELOAD_FOR_OUTADDR_ADDRESS \
313 #ifdef HAVE_SECONDARY_RELOADS
314 static int push_secondary_reload PROTO((int, rtx, int, int, enum reg_class,
315 enum machine_mode, enum reload_type,
318 static enum reg_class find_valid_class PROTO((enum machine_mode, int));
319 static int push_reload PROTO((rtx, rtx, rtx *, rtx *, enum reg_class,
320 enum machine_mode, enum machine_mode,
321 int, int, int, enum reload_type));
322 static void push_replacement PROTO((rtx *, int, enum machine_mode));
323 static void combine_reloads PROTO((void));
324 static rtx find_dummy_reload PROTO((rtx, rtx, rtx *, rtx *,
325 enum machine_mode, enum machine_mode,
326 enum reg_class, int, int));
327 static int earlyclobber_operand_p PROTO((rtx));
328 static int hard_reg_set_here_p PROTO((int, int, rtx));
329 static struct decomposition decompose PROTO((rtx));
330 static int immune_p PROTO((rtx, rtx, struct decomposition));
331 static int alternative_allows_memconst PROTO((char *, int));
332 static rtx find_reloads_toplev PROTO((rtx, int, enum reload_type, int, int));
333 static rtx make_memloc PROTO((rtx, int));
334 static int find_reloads_address PROTO((enum machine_mode, rtx *, rtx, rtx *,
335 int, enum reload_type, int, rtx));
336 static rtx subst_reg_equivs PROTO((rtx));
337 static rtx subst_indexed_address PROTO((rtx));
338 static int find_reloads_address_1 PROTO((enum machine_mode, rtx, int, rtx *,
339 int, enum reload_type,int, rtx));
340 static void find_reloads_address_part PROTO((rtx, rtx *, enum reg_class,
341 enum machine_mode, int,
342 enum reload_type, int));
343 static int find_inc_amount PROTO((rtx, rtx));
345 #ifdef HAVE_SECONDARY_RELOADS
347 /* Determine if any secondary reloads are needed for loading (if IN_P is
348 non-zero) or storing (if IN_P is zero) X to or from a reload register of
349 register class RELOAD_CLASS in mode RELOAD_MODE. If secondary reloads
350 are needed, push them.
352 Return the reload number of the secondary reload we made, or -1 if
353 we didn't need one. *PICODE is set to the insn_code to use if we do
354 need a secondary reload. */
357 push_secondary_reload (in_p, x, opnum, optional, reload_class, reload_mode,
363 enum reg_class reload_class;
364 enum machine_mode reload_mode;
365 enum reload_type type;
366 enum insn_code *picode;
368 enum reg_class class = NO_REGS;
369 enum machine_mode mode = reload_mode;
370 enum insn_code icode = CODE_FOR_nothing;
371 enum reg_class t_class = NO_REGS;
372 enum machine_mode t_mode = VOIDmode;
373 enum insn_code t_icode = CODE_FOR_nothing;
374 enum reload_type secondary_type;
375 int s_reload, t_reload = -1;
377 if (type == RELOAD_FOR_INPUT_ADDRESS
378 || type == RELOAD_FOR_OUTPUT_ADDRESS
379 || type == RELOAD_FOR_INPADDR_ADDRESS
380 || type == RELOAD_FOR_OUTADDR_ADDRESS)
381 secondary_type = type;
383 secondary_type = in_p ? RELOAD_FOR_INPUT_ADDRESS : RELOAD_FOR_OUTPUT_ADDRESS;
385 *picode = CODE_FOR_nothing;
387 /* If X is a paradoxical SUBREG, use the inner value to determine both the
388 mode and object being reloaded. */
389 if (GET_CODE (x) == SUBREG
390 && (GET_MODE_SIZE (GET_MODE (x))
391 > GET_MODE_SIZE (GET_MODE (SUBREG_REG (x)))))
394 reload_mode = GET_MODE (x);
397 /* If X is a pseudo-register that has an equivalent MEM (actually, if it
398 is still a pseudo-register by now, it *must* have an equivalent MEM
399 but we don't want to assume that), use that equivalent when seeing if
400 a secondary reload is needed since whether or not a reload is needed
401 might be sensitive to the form of the MEM. */
403 if (GET_CODE (x) == REG && REGNO (x) >= FIRST_PSEUDO_REGISTER
404 && reg_equiv_mem[REGNO (x)] != 0)
405 x = reg_equiv_mem[REGNO (x)];
407 #ifdef SECONDARY_INPUT_RELOAD_CLASS
409 class = SECONDARY_INPUT_RELOAD_CLASS (reload_class, reload_mode, x);
412 #ifdef SECONDARY_OUTPUT_RELOAD_CLASS
414 class = SECONDARY_OUTPUT_RELOAD_CLASS (reload_class, reload_mode, x);
417 /* If we don't need any secondary registers, done. */
418 if (class == NO_REGS)
421 /* Get a possible insn to use. If the predicate doesn't accept X, don't
424 icode = (in_p ? reload_in_optab[(int) reload_mode]
425 : reload_out_optab[(int) reload_mode]);
427 if (icode != CODE_FOR_nothing
428 && insn_operand_predicate[(int) icode][in_p]
429 && (! (insn_operand_predicate[(int) icode][in_p]) (x, reload_mode)))
430 icode = CODE_FOR_nothing;
432 /* If we will be using an insn, see if it can directly handle the reload
433 register we will be using. If it can, the secondary reload is for a
434 scratch register. If it can't, we will use the secondary reload for
435 an intermediate register and require a tertiary reload for the scratch
438 if (icode != CODE_FOR_nothing)
440 /* If IN_P is non-zero, the reload register will be the output in
441 operand 0. If IN_P is zero, the reload register will be the input
442 in operand 1. Outputs should have an initial "=", which we must
445 char insn_letter = insn_operand_constraint[(int) icode][!in_p][in_p];
446 enum reg_class insn_class
447 = (insn_letter == 'r' ? GENERAL_REGS
448 : REG_CLASS_FROM_LETTER (insn_letter));
450 if (insn_class == NO_REGS
451 || (in_p && insn_operand_constraint[(int) icode][!in_p][0] != '=')
452 /* The scratch register's constraint must start with "=&". */
453 || insn_operand_constraint[(int) icode][2][0] != '='
454 || insn_operand_constraint[(int) icode][2][1] != '&')
457 if (reg_class_subset_p (reload_class, insn_class))
458 mode = insn_operand_mode[(int) icode][2];
461 char t_letter = insn_operand_constraint[(int) icode][2][2];
463 t_mode = insn_operand_mode[(int) icode][2];
464 t_class = (t_letter == 'r' ? GENERAL_REGS
465 : REG_CLASS_FROM_LETTER (t_letter));
467 icode = CODE_FOR_nothing;
471 /* This case isn't valid, so fail. Reload is allowed to use the same
472 register for RELOAD_FOR_INPUT_ADDRESS and RELOAD_FOR_INPUT reloads, but
473 in the case of a secondary register, we actually need two different
474 registers for correct code. We fail here to prevent the possibility of
475 silently generating incorrect code later.
477 The convention is that secondary input reloads are valid only if the
478 secondary_class is different from class. If you have such a case, you
479 can not use secondary reloads, you must work around the problem some
482 Allow this when MODE is not reload_mode and assume that the generated
483 code handles this case (it does on the Alpha, which is the only place
484 this currently happens). */
486 if (in_p && class == reload_class && mode == reload_mode)
489 /* If we need a tertiary reload, see if we have one we can reuse or else
492 if (t_class != NO_REGS)
494 for (t_reload = 0; t_reload < n_reloads; t_reload++)
495 if (reload_secondary_p[t_reload]
496 && (reg_class_subset_p (t_class, reload_reg_class[t_reload])
497 || reg_class_subset_p (reload_reg_class[t_reload], t_class))
498 && ((in_p && reload_inmode[t_reload] == t_mode)
499 || (! in_p && reload_outmode[t_reload] == t_mode))
500 && ((in_p && (reload_secondary_in_icode[t_reload]
501 == CODE_FOR_nothing))
502 || (! in_p &&(reload_secondary_out_icode[t_reload]
503 == CODE_FOR_nothing)))
504 && (reg_class_size[(int) t_class] == 1 || SMALL_REGISTER_CLASSES)
505 && MERGABLE_RELOADS (secondary_type,
506 reload_when_needed[t_reload],
507 opnum, reload_opnum[t_reload]))
510 reload_inmode[t_reload] = t_mode;
512 reload_outmode[t_reload] = t_mode;
514 if (reg_class_subset_p (t_class, reload_reg_class[t_reload]))
515 reload_reg_class[t_reload] = t_class;
517 reload_opnum[t_reload] = MIN (reload_opnum[t_reload], opnum);
518 reload_optional[t_reload] &= optional;
519 reload_secondary_p[t_reload] = 1;
520 if (MERGE_TO_OTHER (secondary_type, reload_when_needed[t_reload],
521 opnum, reload_opnum[t_reload]))
522 reload_when_needed[t_reload] = RELOAD_OTHER;
525 if (t_reload == n_reloads)
527 /* We need to make a new tertiary reload for this register class. */
528 reload_in[t_reload] = reload_out[t_reload] = 0;
529 reload_reg_class[t_reload] = t_class;
530 reload_inmode[t_reload] = in_p ? t_mode : VOIDmode;
531 reload_outmode[t_reload] = ! in_p ? t_mode : VOIDmode;
532 reload_reg_rtx[t_reload] = 0;
533 reload_optional[t_reload] = optional;
534 reload_nongroup[t_reload] = 0;
535 reload_inc[t_reload] = 0;
536 /* Maybe we could combine these, but it seems too tricky. */
537 reload_nocombine[t_reload] = 1;
538 reload_in_reg[t_reload] = 0;
539 reload_opnum[t_reload] = opnum;
540 reload_when_needed[t_reload] = secondary_type;
541 reload_secondary_in_reload[t_reload] = -1;
542 reload_secondary_out_reload[t_reload] = -1;
543 reload_secondary_in_icode[t_reload] = CODE_FOR_nothing;
544 reload_secondary_out_icode[t_reload] = CODE_FOR_nothing;
545 reload_secondary_p[t_reload] = 1;
551 /* See if we can reuse an existing secondary reload. */
552 for (s_reload = 0; s_reload < n_reloads; s_reload++)
553 if (reload_secondary_p[s_reload]
554 && (reg_class_subset_p (class, reload_reg_class[s_reload])
555 || reg_class_subset_p (reload_reg_class[s_reload], class))
556 && ((in_p && reload_inmode[s_reload] == mode)
557 || (! in_p && reload_outmode[s_reload] == mode))
558 && ((in_p && reload_secondary_in_reload[s_reload] == t_reload)
559 || (! in_p && reload_secondary_out_reload[s_reload] == t_reload))
560 && ((in_p && reload_secondary_in_icode[s_reload] == t_icode)
561 || (! in_p && reload_secondary_out_icode[s_reload] == t_icode))
562 && (reg_class_size[(int) class] == 1 || SMALL_REGISTER_CLASSES)
563 && MERGABLE_RELOADS (secondary_type, reload_when_needed[s_reload],
564 opnum, reload_opnum[s_reload]))
567 reload_inmode[s_reload] = mode;
569 reload_outmode[s_reload] = mode;
571 if (reg_class_subset_p (class, reload_reg_class[s_reload]))
572 reload_reg_class[s_reload] = class;
574 reload_opnum[s_reload] = MIN (reload_opnum[s_reload], opnum);
575 reload_optional[s_reload] &= optional;
576 reload_secondary_p[s_reload] = 1;
577 if (MERGE_TO_OTHER (secondary_type, reload_when_needed[s_reload],
578 opnum, reload_opnum[s_reload]))
579 reload_when_needed[s_reload] = RELOAD_OTHER;
582 if (s_reload == n_reloads)
584 #ifdef SECONDARY_MEMORY_NEEDED
585 /* If we need a memory location to copy between the two reload regs,
586 set it up now. Note that we do the input case before making
587 the reload and the output case after. This is due to the
588 way reloads are output. */
590 if (in_p && icode == CODE_FOR_nothing
591 && SECONDARY_MEMORY_NEEDED (class, reload_class, mode))
592 get_secondary_mem (x, reload_mode, opnum, type);
595 /* We need to make a new secondary reload for this register class. */
596 reload_in[s_reload] = reload_out[s_reload] = 0;
597 reload_reg_class[s_reload] = class;
599 reload_inmode[s_reload] = in_p ? mode : VOIDmode;
600 reload_outmode[s_reload] = ! in_p ? mode : VOIDmode;
601 reload_reg_rtx[s_reload] = 0;
602 reload_optional[s_reload] = optional;
603 reload_nongroup[s_reload] = 0;
604 reload_inc[s_reload] = 0;
605 /* Maybe we could combine these, but it seems too tricky. */
606 reload_nocombine[s_reload] = 1;
607 reload_in_reg[s_reload] = 0;
608 reload_opnum[s_reload] = opnum;
609 reload_when_needed[s_reload] = secondary_type;
610 reload_secondary_in_reload[s_reload] = in_p ? t_reload : -1;
611 reload_secondary_out_reload[s_reload] = ! in_p ? t_reload : -1;
612 reload_secondary_in_icode[s_reload] = in_p ? t_icode : CODE_FOR_nothing;
613 reload_secondary_out_icode[s_reload]
614 = ! in_p ? t_icode : CODE_FOR_nothing;
615 reload_secondary_p[s_reload] = 1;
619 #ifdef SECONDARY_MEMORY_NEEDED
620 if (! in_p && icode == CODE_FOR_nothing
621 && SECONDARY_MEMORY_NEEDED (reload_class, class, mode))
622 get_secondary_mem (x, mode, opnum, type);
629 #endif /* HAVE_SECONDARY_RELOADS */
631 #ifdef SECONDARY_MEMORY_NEEDED
633 /* Return a memory location that will be used to copy X in mode MODE.
634 If we haven't already made a location for this mode in this insn,
635 call find_reloads_address on the location being returned. */
638 get_secondary_mem (x, mode, opnum, type)
640 enum machine_mode mode;
642 enum reload_type type;
647 /* By default, if MODE is narrower than a word, widen it to a word.
648 This is required because most machines that require these memory
649 locations do not support short load and stores from all registers
650 (e.g., FP registers). */
652 #ifdef SECONDARY_MEMORY_NEEDED_MODE
653 mode = SECONDARY_MEMORY_NEEDED_MODE (mode);
655 if (GET_MODE_BITSIZE (mode) < BITS_PER_WORD)
656 mode = mode_for_size (BITS_PER_WORD, GET_MODE_CLASS (mode), 0);
659 /* If we already have made a MEM for this operand in MODE, return it. */
660 if (secondary_memlocs_elim[(int) mode][opnum] != 0)
661 return secondary_memlocs_elim[(int) mode][opnum];
663 /* If this is the first time we've tried to get a MEM for this mode,
664 allocate a new one. `something_changed' in reload will get set
665 by noticing that the frame size has changed. */
667 if (secondary_memlocs[(int) mode] == 0)
669 #ifdef SECONDARY_MEMORY_NEEDED_RTX
670 secondary_memlocs[(int) mode] = SECONDARY_MEMORY_NEEDED_RTX (mode);
672 secondary_memlocs[(int) mode]
673 = assign_stack_local (mode, GET_MODE_SIZE (mode), 0);
677 /* Get a version of the address doing any eliminations needed. If that
678 didn't give us a new MEM, make a new one if it isn't valid. */
680 loc = eliminate_regs (secondary_memlocs[(int) mode], VOIDmode, NULL_RTX);
681 mem_valid = strict_memory_address_p (mode, XEXP (loc, 0));
683 if (! mem_valid && loc == secondary_memlocs[(int) mode])
684 loc = copy_rtx (loc);
686 /* The only time the call below will do anything is if the stack
687 offset is too large. In that case IND_LEVELS doesn't matter, so we
688 can just pass a zero. Adjust the type to be the address of the
689 corresponding object. If the address was valid, save the eliminated
690 address. If it wasn't valid, we need to make a reload each time, so
695 type = (type == RELOAD_FOR_INPUT ? RELOAD_FOR_INPUT_ADDRESS
696 : type == RELOAD_FOR_OUTPUT ? RELOAD_FOR_OUTPUT_ADDRESS
699 find_reloads_address (mode, NULL_PTR, XEXP (loc, 0), &XEXP (loc, 0),
703 secondary_memlocs_elim[(int) mode][opnum] = loc;
707 /* Clear any secondary memory locations we've made. */
710 clear_secondary_mem ()
712 bzero ((char *) secondary_memlocs, sizeof secondary_memlocs);
714 #endif /* SECONDARY_MEMORY_NEEDED */
716 /* Find the largest class for which every register number plus N is valid in
717 M1 (if in range). Abort if no such class exists. */
719 static enum reg_class
720 find_valid_class (m1, n)
721 enum machine_mode m1;
726 enum reg_class best_class;
729 for (class = 1; class < N_REG_CLASSES; class++)
732 for (regno = 0; regno < FIRST_PSEUDO_REGISTER && ! bad; regno++)
733 if (TEST_HARD_REG_BIT (reg_class_contents[class], regno)
734 && TEST_HARD_REG_BIT (reg_class_contents[class], regno + n)
735 && ! HARD_REGNO_MODE_OK (regno + n, m1))
738 if (! bad && reg_class_size[class] > best_size)
739 best_class = class, best_size = reg_class_size[class];
748 /* Record one reload that needs to be performed.
749 IN is an rtx saying where the data are to be found before this instruction.
750 OUT says where they must be stored after the instruction.
751 (IN is zero for data not read, and OUT is zero for data not written.)
752 INLOC and OUTLOC point to the places in the instructions where
753 IN and OUT were found.
754 If IN and OUT are both non-zero, it means the same register must be used
755 to reload both IN and OUT.
757 CLASS is a register class required for the reloaded data.
758 INMODE is the machine mode that the instruction requires
759 for the reg that replaces IN and OUTMODE is likewise for OUT.
761 If IN is zero, then OUT's location and mode should be passed as
764 STRICT_LOW is the 1 if there is a containing STRICT_LOW_PART rtx.
766 OPTIONAL nonzero means this reload does not need to be performed:
767 it can be discarded if that is more convenient.
769 OPNUM and TYPE say what the purpose of this reload is.
771 The return value is the reload-number for this reload.
773 If both IN and OUT are nonzero, in some rare cases we might
774 want to make two separate reloads. (Actually we never do this now.)
775 Therefore, the reload-number for OUT is stored in
776 output_reloadnum when we return; the return value applies to IN.
777 Usually (presently always), when IN and OUT are nonzero,
778 the two reload-numbers are equal, but the caller should be careful to
782 push_reload (in, out, inloc, outloc, class,
783 inmode, outmode, strict_low, optional, opnum, type)
784 register rtx in, out;
786 enum reg_class class;
787 enum machine_mode inmode, outmode;
791 enum reload_type type;
795 int dont_remove_subreg = 0;
796 rtx *in_subreg_loc = 0, *out_subreg_loc = 0;
797 int secondary_in_reload = -1, secondary_out_reload = -1;
798 enum insn_code secondary_in_icode = CODE_FOR_nothing;
799 enum insn_code secondary_out_icode = CODE_FOR_nothing;
801 /* INMODE and/or OUTMODE could be VOIDmode if no mode
802 has been specified for the operand. In that case,
803 use the operand's mode as the mode to reload. */
804 if (inmode == VOIDmode && in != 0)
805 inmode = GET_MODE (in);
806 if (outmode == VOIDmode && out != 0)
807 outmode = GET_MODE (out);
809 /* If IN is a pseudo register everywhere-equivalent to a constant, and
810 it is not in a hard register, reload straight from the constant,
811 since we want to get rid of such pseudo registers.
812 Often this is done earlier, but not always in find_reloads_address. */
813 if (in != 0 && GET_CODE (in) == REG)
815 register int regno = REGNO (in);
817 if (regno >= FIRST_PSEUDO_REGISTER && reg_renumber[regno] < 0
818 && reg_equiv_constant[regno] != 0)
819 in = reg_equiv_constant[regno];
822 /* Likewise for OUT. Of course, OUT will never be equivalent to
823 an actual constant, but it might be equivalent to a memory location
824 (in the case of a parameter). */
825 if (out != 0 && GET_CODE (out) == REG)
827 register int regno = REGNO (out);
829 if (regno >= FIRST_PSEUDO_REGISTER && reg_renumber[regno] < 0
830 && reg_equiv_constant[regno] != 0)
831 out = reg_equiv_constant[regno];
834 /* If we have a read-write operand with an address side-effect,
835 change either IN or OUT so the side-effect happens only once. */
836 if (in != 0 && out != 0 && GET_CODE (in) == MEM && rtx_equal_p (in, out))
838 if (GET_CODE (XEXP (in, 0)) == POST_INC
839 || GET_CODE (XEXP (in, 0)) == POST_DEC)
840 in = gen_rtx_MEM (GET_MODE (in), XEXP (XEXP (in, 0), 0));
841 if (GET_CODE (XEXP (in, 0)) == PRE_INC
842 || GET_CODE (XEXP (in, 0)) == PRE_DEC)
843 out = gen_rtx_MEM (GET_MODE (out), XEXP (XEXP (out, 0), 0));
846 /* If we are reloading a (SUBREG constant ...), really reload just the
847 inside expression in its own mode. Similarly for (SUBREG (PLUS ...)).
848 If we have (SUBREG:M1 (MEM:M2 ...) ...) (or an inner REG that is still
849 a pseudo and hence will become a MEM) with M1 wider than M2 and the
850 register is a pseudo, also reload the inside expression.
851 For machines that extend byte loads, do this for any SUBREG of a pseudo
852 where both M1 and M2 are a word or smaller, M1 is wider than M2, and
853 M2 is an integral mode that gets extended when loaded.
854 Similar issue for (SUBREG:M1 (REG:M2 ...) ...) for a hard register R where
855 either M1 is not valid for R or M2 is wider than a word but we only
856 need one word to store an M2-sized quantity in R.
857 (However, if OUT is nonzero, we need to reload the reg *and*
858 the subreg, so do nothing here, and let following statement handle it.)
860 Note that the case of (SUBREG (CONST_INT...)...) is handled elsewhere;
861 we can't handle it here because CONST_INT does not indicate a mode.
863 Similarly, we must reload the inside expression if we have a
864 STRICT_LOW_PART (presumably, in == out in the cas).
866 Also reload the inner expression if it does not require a secondary
867 reload but the SUBREG does.
869 Finally, reload the inner expression if it is a register that is in
870 the class whose registers cannot be referenced in a different size
871 and M1 is not the same size as M2. If SUBREG_WORD is nonzero, we
872 cannot reload just the inside since we might end up with the wrong
875 if (in != 0 && GET_CODE (in) == SUBREG && SUBREG_WORD (in) == 0
876 #ifdef CLASS_CANNOT_CHANGE_SIZE
877 && class != CLASS_CANNOT_CHANGE_SIZE
879 && (CONSTANT_P (SUBREG_REG (in))
880 || GET_CODE (SUBREG_REG (in)) == PLUS
882 || (((GET_CODE (SUBREG_REG (in)) == REG
883 && REGNO (SUBREG_REG (in)) >= FIRST_PSEUDO_REGISTER)
884 || GET_CODE (SUBREG_REG (in)) == MEM)
885 && ((GET_MODE_SIZE (inmode)
886 > GET_MODE_SIZE (GET_MODE (SUBREG_REG (in))))
887 #ifdef LOAD_EXTEND_OP
888 || (GET_MODE_SIZE (inmode) <= UNITS_PER_WORD
889 && (GET_MODE_SIZE (GET_MODE (SUBREG_REG (in)))
891 && (GET_MODE_SIZE (inmode)
892 > GET_MODE_SIZE (GET_MODE (SUBREG_REG (in))))
893 && INTEGRAL_MODE_P (GET_MODE (SUBREG_REG (in)))
894 && LOAD_EXTEND_OP (GET_MODE (SUBREG_REG (in))) != NIL)
896 #ifdef WORD_REGISTER_OPERATIONS
897 || ((GET_MODE_SIZE (inmode)
898 < GET_MODE_SIZE (GET_MODE (SUBREG_REG (in))))
899 && ((GET_MODE_SIZE (inmode) - 1) / UNITS_PER_WORD ==
900 ((GET_MODE_SIZE (GET_MODE (SUBREG_REG (in))) - 1)
904 || (GET_CODE (SUBREG_REG (in)) == REG
905 && REGNO (SUBREG_REG (in)) < FIRST_PSEUDO_REGISTER
906 /* The case where out is nonzero
907 is handled differently in the following statement. */
908 && (out == 0 || SUBREG_WORD (in) == 0)
909 && ((GET_MODE_SIZE (inmode) <= UNITS_PER_WORD
910 && (GET_MODE_SIZE (GET_MODE (SUBREG_REG (in)))
912 && ((GET_MODE_SIZE (GET_MODE (SUBREG_REG (in)))
914 != HARD_REGNO_NREGS (REGNO (SUBREG_REG (in)),
915 GET_MODE (SUBREG_REG (in)))))
916 || ! HARD_REGNO_MODE_OK ((REGNO (SUBREG_REG (in))
919 #ifdef SECONDARY_INPUT_RELOAD_CLASS
920 || (SECONDARY_INPUT_RELOAD_CLASS (class, inmode, in) != NO_REGS
921 && (SECONDARY_INPUT_RELOAD_CLASS (class,
922 GET_MODE (SUBREG_REG (in)),
926 #ifdef CLASS_CANNOT_CHANGE_SIZE
927 || (GET_CODE (SUBREG_REG (in)) == REG
928 && REGNO (SUBREG_REG (in)) < FIRST_PSEUDO_REGISTER
929 && (TEST_HARD_REG_BIT
930 (reg_class_contents[(int) CLASS_CANNOT_CHANGE_SIZE],
931 REGNO (SUBREG_REG (in))))
932 && (GET_MODE_SIZE (GET_MODE (SUBREG_REG (in)))
933 != GET_MODE_SIZE (inmode)))
937 in_subreg_loc = inloc;
938 inloc = &SUBREG_REG (in);
940 #if ! defined (LOAD_EXTEND_OP) && ! defined (WORD_REGISTER_OPERATIONS)
941 if (GET_CODE (in) == MEM)
942 /* This is supposed to happen only for paradoxical subregs made by
943 combine.c. (SUBREG (MEM)) isn't supposed to occur other ways. */
944 if (GET_MODE_SIZE (GET_MODE (in)) > GET_MODE_SIZE (inmode))
947 inmode = GET_MODE (in);
950 /* Similar issue for (SUBREG:M1 (REG:M2 ...) ...) for a hard register R where
951 either M1 is not valid for R or M2 is wider than a word but we only
952 need one word to store an M2-sized quantity in R.
954 However, we must reload the inner reg *as well as* the subreg in
957 /* Similar issue for (SUBREG constant ...) if it was not handled by the
958 code above. This can happen if SUBREG_WORD != 0. */
960 if (in != 0 && GET_CODE (in) == SUBREG
961 && (CONSTANT_P (SUBREG_REG (in))
962 || (GET_CODE (SUBREG_REG (in)) == REG
963 && REGNO (SUBREG_REG (in)) < FIRST_PSEUDO_REGISTER
964 && (! HARD_REGNO_MODE_OK (REGNO (SUBREG_REG (in))
967 || (GET_MODE_SIZE (inmode) <= UNITS_PER_WORD
968 && (GET_MODE_SIZE (GET_MODE (SUBREG_REG (in)))
970 && ((GET_MODE_SIZE (GET_MODE (SUBREG_REG (in)))
972 != HARD_REGNO_NREGS (REGNO (SUBREG_REG (in)),
973 GET_MODE (SUBREG_REG (in)))))))))
975 /* This relies on the fact that emit_reload_insns outputs the
976 instructions for input reloads of type RELOAD_OTHER in the same
977 order as the reloads. Thus if the outer reload is also of type
978 RELOAD_OTHER, we are guaranteed that this inner reload will be
979 output before the outer reload. */
980 push_reload (SUBREG_REG (in), NULL_RTX, &SUBREG_REG (in), NULL_PTR,
981 find_valid_class (inmode, SUBREG_WORD (in)),
982 VOIDmode, VOIDmode, 0, 0, opnum, type);
983 dont_remove_subreg = 1;
986 /* Similarly for paradoxical and problematical SUBREGs on the output.
987 Note that there is no reason we need worry about the previous value
988 of SUBREG_REG (out); even if wider than out,
989 storing in a subreg is entitled to clobber it all
990 (except in the case of STRICT_LOW_PART,
991 and in that case the constraint should label it input-output.) */
992 if (out != 0 && GET_CODE (out) == SUBREG && SUBREG_WORD (out) == 0
993 #ifdef CLASS_CANNOT_CHANGE_SIZE
994 && class != CLASS_CANNOT_CHANGE_SIZE
996 && (CONSTANT_P (SUBREG_REG (out))
998 || (((GET_CODE (SUBREG_REG (out)) == REG
999 && REGNO (SUBREG_REG (out)) >= FIRST_PSEUDO_REGISTER)
1000 || GET_CODE (SUBREG_REG (out)) == MEM)
1001 && ((GET_MODE_SIZE (outmode)
1002 > GET_MODE_SIZE (GET_MODE (SUBREG_REG (out))))
1003 #ifdef WORD_REGISTER_OPERATIONS
1004 || ((GET_MODE_SIZE (outmode)
1005 < GET_MODE_SIZE (GET_MODE (SUBREG_REG (out))))
1006 && ((GET_MODE_SIZE (outmode) - 1) / UNITS_PER_WORD ==
1007 ((GET_MODE_SIZE (GET_MODE (SUBREG_REG (out))) - 1)
1011 || (GET_CODE (SUBREG_REG (out)) == REG
1012 && REGNO (SUBREG_REG (out)) < FIRST_PSEUDO_REGISTER
1013 && ((GET_MODE_SIZE (outmode) <= UNITS_PER_WORD
1014 && (GET_MODE_SIZE (GET_MODE (SUBREG_REG (out)))
1016 && ((GET_MODE_SIZE (GET_MODE (SUBREG_REG (out)))
1018 != HARD_REGNO_NREGS (REGNO (SUBREG_REG (out)),
1019 GET_MODE (SUBREG_REG (out)))))
1020 || ! HARD_REGNO_MODE_OK ((REGNO (SUBREG_REG (out))
1021 + SUBREG_WORD (out)),
1023 #ifdef SECONDARY_OUTPUT_RELOAD_CLASS
1024 || (SECONDARY_OUTPUT_RELOAD_CLASS (class, outmode, out) != NO_REGS
1025 && (SECONDARY_OUTPUT_RELOAD_CLASS (class,
1026 GET_MODE (SUBREG_REG (out)),
1030 #ifdef CLASS_CANNOT_CHANGE_SIZE
1031 || (GET_CODE (SUBREG_REG (out)) == REG
1032 && REGNO (SUBREG_REG (out)) < FIRST_PSEUDO_REGISTER
1033 && (TEST_HARD_REG_BIT
1034 (reg_class_contents[(int) CLASS_CANNOT_CHANGE_SIZE],
1035 REGNO (SUBREG_REG (out))))
1036 && (GET_MODE_SIZE (GET_MODE (SUBREG_REG (out)))
1037 != GET_MODE_SIZE (outmode)))
1041 out_subreg_loc = outloc;
1042 outloc = &SUBREG_REG (out);
1044 #if ! defined (LOAD_EXTEND_OP) && ! defined (WORD_REGISTER_OPERATIONS)
1045 if (GET_CODE (out) == MEM
1046 && GET_MODE_SIZE (GET_MODE (out)) > GET_MODE_SIZE (outmode))
1049 outmode = GET_MODE (out);
1052 /* Similar issue for (SUBREG:M1 (REG:M2 ...) ...) for a hard register R where
1053 either M1 is not valid for R or M2 is wider than a word but we only
1054 need one word to store an M2-sized quantity in R.
1056 However, we must reload the inner reg *as well as* the subreg in
1057 that case. In this case, the inner reg is an in-out reload. */
1059 if (out != 0 && GET_CODE (out) == SUBREG
1060 && GET_CODE (SUBREG_REG (out)) == REG
1061 && REGNO (SUBREG_REG (out)) < FIRST_PSEUDO_REGISTER
1062 && (! HARD_REGNO_MODE_OK (REGNO (SUBREG_REG (out)) + SUBREG_WORD (out),
1064 || (GET_MODE_SIZE (outmode) <= UNITS_PER_WORD
1065 && (GET_MODE_SIZE (GET_MODE (SUBREG_REG (out)))
1067 && ((GET_MODE_SIZE (GET_MODE (SUBREG_REG (out)))
1069 != HARD_REGNO_NREGS (REGNO (SUBREG_REG (out)),
1070 GET_MODE (SUBREG_REG (out)))))))
1072 /* This relies on the fact that emit_reload_insns outputs the
1073 instructions for output reloads of type RELOAD_OTHER in reverse
1074 order of the reloads. Thus if the outer reload is also of type
1075 RELOAD_OTHER, we are guaranteed that this inner reload will be
1076 output after the outer reload. */
1077 dont_remove_subreg = 1;
1078 push_reload (SUBREG_REG (out), SUBREG_REG (out), &SUBREG_REG (out),
1080 find_valid_class (outmode, SUBREG_WORD (out)),
1081 VOIDmode, VOIDmode, 0, 0,
1082 opnum, RELOAD_OTHER);
1085 /* If IN appears in OUT, we can't share any input-only reload for IN. */
1086 if (in != 0 && out != 0 && GET_CODE (out) == MEM
1087 && (GET_CODE (in) == REG || GET_CODE (in) == MEM)
1088 && reg_overlap_mentioned_for_reload_p (in, XEXP (out, 0)))
1091 /* If IN is a SUBREG of a hard register, make a new REG. This
1092 simplifies some of the cases below. */
1094 if (in != 0 && GET_CODE (in) == SUBREG && GET_CODE (SUBREG_REG (in)) == REG
1095 && REGNO (SUBREG_REG (in)) < FIRST_PSEUDO_REGISTER
1096 && ! dont_remove_subreg)
1097 in = gen_rtx_REG (GET_MODE (in),
1098 REGNO (SUBREG_REG (in)) + SUBREG_WORD (in));
1100 /* Similarly for OUT. */
1101 if (out != 0 && GET_CODE (out) == SUBREG
1102 && GET_CODE (SUBREG_REG (out)) == REG
1103 && REGNO (SUBREG_REG (out)) < FIRST_PSEUDO_REGISTER
1104 && ! dont_remove_subreg)
1105 out = gen_rtx_REG (GET_MODE (out),
1106 REGNO (SUBREG_REG (out)) + SUBREG_WORD (out));
1108 /* Narrow down the class of register wanted if that is
1109 desirable on this machine for efficiency. */
1111 class = PREFERRED_RELOAD_CLASS (in, class);
1113 /* Output reloads may need analogous treatment, different in detail. */
1114 #ifdef PREFERRED_OUTPUT_RELOAD_CLASS
1116 class = PREFERRED_OUTPUT_RELOAD_CLASS (out, class);
1119 /* Make sure we use a class that can handle the actual pseudo
1120 inside any subreg. For example, on the 386, QImode regs
1121 can appear within SImode subregs. Although GENERAL_REGS
1122 can handle SImode, QImode needs a smaller class. */
1123 #ifdef LIMIT_RELOAD_CLASS
1125 class = LIMIT_RELOAD_CLASS (inmode, class);
1126 else if (in != 0 && GET_CODE (in) == SUBREG)
1127 class = LIMIT_RELOAD_CLASS (GET_MODE (SUBREG_REG (in)), class);
1130 class = LIMIT_RELOAD_CLASS (outmode, class);
1131 if (out != 0 && GET_CODE (out) == SUBREG)
1132 class = LIMIT_RELOAD_CLASS (GET_MODE (SUBREG_REG (out)), class);
1135 /* Verify that this class is at least possible for the mode that
1137 if (this_insn_is_asm)
1139 enum machine_mode mode;
1140 if (GET_MODE_SIZE (inmode) > GET_MODE_SIZE (outmode))
1144 if (mode == VOIDmode)
1146 error_for_asm (this_insn, "cannot reload integer constant operand in `asm'");
1151 outmode = word_mode;
1153 for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
1154 if (HARD_REGNO_MODE_OK (i, mode)
1155 && TEST_HARD_REG_BIT (reg_class_contents[(int) class], i))
1157 int nregs = HARD_REGNO_NREGS (i, mode);
1160 for (j = 1; j < nregs; j++)
1161 if (! TEST_HARD_REG_BIT (reg_class_contents[(int) class], i + j))
1166 if (i == FIRST_PSEUDO_REGISTER)
1168 error_for_asm (this_insn, "impossible register constraint in `asm'");
1173 if (class == NO_REGS)
1176 /* We can use an existing reload if the class is right
1177 and at least one of IN and OUT is a match
1178 and the other is at worst neutral.
1179 (A zero compared against anything is neutral.)
1181 If SMALL_REGISTER_CLASSES, don't use existing reloads unless they are
1182 for the same thing since that can cause us to need more reload registers
1183 than we otherwise would. */
1185 for (i = 0; i < n_reloads; i++)
1186 if ((reg_class_subset_p (class, reload_reg_class[i])
1187 || reg_class_subset_p (reload_reg_class[i], class))
1188 /* If the existing reload has a register, it must fit our class. */
1189 && (reload_reg_rtx[i] == 0
1190 || TEST_HARD_REG_BIT (reg_class_contents[(int) class],
1191 true_regnum (reload_reg_rtx[i])))
1192 && ((in != 0 && MATCHES (reload_in[i], in) && ! dont_share
1193 && (out == 0 || reload_out[i] == 0 || MATCHES (reload_out[i], out)))
1195 (out != 0 && MATCHES (reload_out[i], out)
1196 && (in == 0 || reload_in[i] == 0 || MATCHES (reload_in[i], in))))
1197 && (reg_class_size[(int) class] == 1 || SMALL_REGISTER_CLASSES)
1198 && MERGABLE_RELOADS (type, reload_when_needed[i],
1199 opnum, reload_opnum[i]))
1202 /* Reloading a plain reg for input can match a reload to postincrement
1203 that reg, since the postincrement's value is the right value.
1204 Likewise, it can match a preincrement reload, since we regard
1205 the preincrementation as happening before any ref in this insn
1206 to that register. */
1208 for (i = 0; i < n_reloads; i++)
1209 if ((reg_class_subset_p (class, reload_reg_class[i])
1210 || reg_class_subset_p (reload_reg_class[i], class))
1211 /* If the existing reload has a register, it must fit our class. */
1212 && (reload_reg_rtx[i] == 0
1213 || TEST_HARD_REG_BIT (reg_class_contents[(int) class],
1214 true_regnum (reload_reg_rtx[i])))
1215 && out == 0 && reload_out[i] == 0 && reload_in[i] != 0
1216 && ((GET_CODE (in) == REG
1217 && (GET_CODE (reload_in[i]) == POST_INC
1218 || GET_CODE (reload_in[i]) == POST_DEC
1219 || GET_CODE (reload_in[i]) == PRE_INC
1220 || GET_CODE (reload_in[i]) == PRE_DEC)
1221 && MATCHES (XEXP (reload_in[i], 0), in))
1223 (GET_CODE (reload_in[i]) == REG
1224 && (GET_CODE (in) == POST_INC
1225 || GET_CODE (in) == POST_DEC
1226 || GET_CODE (in) == PRE_INC
1227 || GET_CODE (in) == PRE_DEC)
1228 && MATCHES (XEXP (in, 0), reload_in[i])))
1229 && (reg_class_size[(int) class] == 1 || SMALL_REGISTER_CLASSES)
1230 && MERGABLE_RELOADS (type, reload_when_needed[i],
1231 opnum, reload_opnum[i]))
1233 /* Make sure reload_in ultimately has the increment,
1234 not the plain register. */
1235 if (GET_CODE (in) == REG)
1242 /* See if we need a secondary reload register to move between CLASS
1243 and IN or CLASS and OUT. Get the icode and push any required reloads
1244 needed for each of them if so. */
1246 #ifdef SECONDARY_INPUT_RELOAD_CLASS
1249 = push_secondary_reload (1, in, opnum, optional, class, inmode, type,
1250 &secondary_in_icode);
1253 #ifdef SECONDARY_OUTPUT_RELOAD_CLASS
1254 if (out != 0 && GET_CODE (out) != SCRATCH)
1255 secondary_out_reload
1256 = push_secondary_reload (0, out, opnum, optional, class, outmode,
1257 type, &secondary_out_icode);
1260 /* We found no existing reload suitable for re-use.
1261 So add an additional reload. */
1263 #ifdef SECONDARY_MEMORY_NEEDED
1264 /* If a memory location is needed for the copy, make one. */
1265 if (in != 0 && GET_CODE (in) == REG
1266 && REGNO (in) < FIRST_PSEUDO_REGISTER
1267 && SECONDARY_MEMORY_NEEDED (REGNO_REG_CLASS (REGNO (in)),
1269 get_secondary_mem (in, inmode, opnum, type);
1274 reload_out[i] = out;
1275 reload_reg_class[i] = class;
1276 reload_inmode[i] = inmode;
1277 reload_outmode[i] = outmode;
1278 reload_reg_rtx[i] = 0;
1279 reload_optional[i] = optional;
1280 reload_nongroup[i] = 0;
1282 reload_nocombine[i] = 0;
1283 reload_in_reg[i] = inloc ? *inloc : 0;
1284 reload_opnum[i] = opnum;
1285 reload_when_needed[i] = type;
1286 reload_secondary_in_reload[i] = secondary_in_reload;
1287 reload_secondary_out_reload[i] = secondary_out_reload;
1288 reload_secondary_in_icode[i] = secondary_in_icode;
1289 reload_secondary_out_icode[i] = secondary_out_icode;
1290 reload_secondary_p[i] = 0;
1294 #ifdef SECONDARY_MEMORY_NEEDED
1295 if (out != 0 && GET_CODE (out) == REG
1296 && REGNO (out) < FIRST_PSEUDO_REGISTER
1297 && SECONDARY_MEMORY_NEEDED (class, REGNO_REG_CLASS (REGNO (out)),
1299 get_secondary_mem (out, outmode, opnum, type);
1304 /* We are reusing an existing reload,
1305 but we may have additional information for it.
1306 For example, we may now have both IN and OUT
1307 while the old one may have just one of them. */
1309 /* The modes can be different. If they are, we want to reload in
1310 the larger mode, so that the value is valid for both modes. */
1311 if (inmode != VOIDmode
1312 && GET_MODE_SIZE (inmode) > GET_MODE_SIZE (reload_inmode[i]))
1313 reload_inmode[i] = inmode;
1314 if (outmode != VOIDmode
1315 && GET_MODE_SIZE (outmode) > GET_MODE_SIZE (reload_outmode[i]))
1316 reload_outmode[i] = outmode;
1320 reload_out[i] = out;
1321 if (reg_class_subset_p (class, reload_reg_class[i]))
1322 reload_reg_class[i] = class;
1323 reload_optional[i] &= optional;
1324 if (MERGE_TO_OTHER (type, reload_when_needed[i],
1325 opnum, reload_opnum[i]))
1326 reload_when_needed[i] = RELOAD_OTHER;
1327 reload_opnum[i] = MIN (reload_opnum[i], opnum);
1330 /* If the ostensible rtx being reload differs from the rtx found
1331 in the location to substitute, this reload is not safe to combine
1332 because we cannot reliably tell whether it appears in the insn. */
1334 if (in != 0 && in != *inloc)
1335 reload_nocombine[i] = 1;
1338 /* This was replaced by changes in find_reloads_address_1 and the new
1339 function inc_for_reload, which go with a new meaning of reload_inc. */
1341 /* If this is an IN/OUT reload in an insn that sets the CC,
1342 it must be for an autoincrement. It doesn't work to store
1343 the incremented value after the insn because that would clobber the CC.
1344 So we must do the increment of the value reloaded from,
1345 increment it, store it back, then decrement again. */
1346 if (out != 0 && sets_cc0_p (PATTERN (this_insn)))
1350 reload_inc[i] = find_inc_amount (PATTERN (this_insn), in);
1351 /* If we did not find a nonzero amount-to-increment-by,
1352 that contradicts the belief that IN is being incremented
1353 in an address in this insn. */
1354 if (reload_inc[i] == 0)
1359 /* If we will replace IN and OUT with the reload-reg,
1360 record where they are located so that substitution need
1361 not do a tree walk. */
1363 if (replace_reloads)
1367 register struct replacement *r = &replacements[n_replacements++];
1369 r->subreg_loc = in_subreg_loc;
1373 if (outloc != 0 && outloc != inloc)
1375 register struct replacement *r = &replacements[n_replacements++];
1378 r->subreg_loc = out_subreg_loc;
1383 /* If this reload is just being introduced and it has both
1384 an incoming quantity and an outgoing quantity that are
1385 supposed to be made to match, see if either one of the two
1386 can serve as the place to reload into.
1388 If one of them is acceptable, set reload_reg_rtx[i]
1391 if (in != 0 && out != 0 && in != out && reload_reg_rtx[i] == 0)
1393 reload_reg_rtx[i] = find_dummy_reload (in, out, inloc, outloc,
1395 reload_reg_class[i], i,
1396 earlyclobber_operand_p (out));
1398 /* If the outgoing register already contains the same value
1399 as the incoming one, we can dispense with loading it.
1400 The easiest way to tell the caller that is to give a phony
1401 value for the incoming operand (same as outgoing one). */
1402 if (reload_reg_rtx[i] == out
1403 && (GET_CODE (in) == REG || CONSTANT_P (in))
1404 && 0 != find_equiv_reg (in, this_insn, 0, REGNO (out),
1405 static_reload_reg_p, i, inmode))
1409 /* If this is an input reload and the operand contains a register that
1410 dies in this insn and is used nowhere else, see if it is the right class
1411 to be used for this reload. Use it if so. (This occurs most commonly
1412 in the case of paradoxical SUBREGs and in-out reloads). We cannot do
1413 this if it is also an output reload that mentions the register unless
1414 the output is a SUBREG that clobbers an entire register.
1416 Note that the operand might be one of the spill regs, if it is a
1417 pseudo reg and we are in a block where spilling has not taken place.
1418 But if there is no spilling in this block, that is OK.
1419 An explicitly used hard reg cannot be a spill reg. */
1421 if (reload_reg_rtx[i] == 0 && in != 0)
1426 for (note = REG_NOTES (this_insn); note; note = XEXP (note, 1))
1427 if (REG_NOTE_KIND (note) == REG_DEAD
1428 && GET_CODE (XEXP (note, 0)) == REG
1429 && (regno = REGNO (XEXP (note, 0))) < FIRST_PSEUDO_REGISTER
1430 && reg_mentioned_p (XEXP (note, 0), in)
1431 && ! refers_to_regno_for_reload_p (regno,
1433 + HARD_REGNO_NREGS (regno,
1435 PATTERN (this_insn), inloc)
1436 /* If this is also an output reload, IN cannot be used as
1437 the reload register if it is set in this insn unless IN
1439 && (out == 0 || in == out
1440 || ! hard_reg_set_here_p (regno,
1442 + HARD_REGNO_NREGS (regno,
1444 PATTERN (this_insn)))
1445 /* ??? Why is this code so different from the previous?
1446 Is there any simple coherent way to describe the two together?
1447 What's going on here. */
1449 || (GET_CODE (in) == SUBREG
1450 && (((GET_MODE_SIZE (GET_MODE (in)) + (UNITS_PER_WORD - 1))
1452 == ((GET_MODE_SIZE (GET_MODE (SUBREG_REG (in)))
1453 + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD))))
1454 /* Make sure the operand fits in the reg that dies. */
1455 && GET_MODE_SIZE (inmode) <= GET_MODE_SIZE (GET_MODE (XEXP (note, 0)))
1456 && HARD_REGNO_MODE_OK (regno, inmode)
1457 && GET_MODE_SIZE (outmode) <= GET_MODE_SIZE (GET_MODE (XEXP (note, 0)))
1458 && HARD_REGNO_MODE_OK (regno, outmode)
1459 && TEST_HARD_REG_BIT (reg_class_contents[(int) class], regno)
1460 && !fixed_regs[regno])
1462 reload_reg_rtx[i] = gen_rtx_REG (inmode, regno);
1468 output_reloadnum = i;
1473 /* Record an additional place we must replace a value
1474 for which we have already recorded a reload.
1475 RELOADNUM is the value returned by push_reload
1476 when the reload was recorded.
1477 This is used in insn patterns that use match_dup. */
1480 push_replacement (loc, reloadnum, mode)
1483 enum machine_mode mode;
1485 if (replace_reloads)
1487 register struct replacement *r = &replacements[n_replacements++];
1488 r->what = reloadnum;
1495 /* Transfer all replacements that used to be in reload FROM to be in
1499 transfer_replacements (to, from)
1504 for (i = 0; i < n_replacements; i++)
1505 if (replacements[i].what == from)
1506 replacements[i].what = to;
1509 /* Remove all replacements in reload FROM. */
1511 remove_replacements (from)
1516 for (i = 0, j = 0; i < n_replacements; i++)
1518 if (replacements[i].what == from)
1520 replacements[j++] = replacements[i];
1524 /* If there is only one output reload, and it is not for an earlyclobber
1525 operand, try to combine it with a (logically unrelated) input reload
1526 to reduce the number of reload registers needed.
1528 This is safe if the input reload does not appear in
1529 the value being output-reloaded, because this implies
1530 it is not needed any more once the original insn completes.
1532 If that doesn't work, see we can use any of the registers that
1533 die in this insn as a reload register. We can if it is of the right
1534 class and does not appear in the value being output-reloaded. */
1540 int output_reload = -1;
1541 int secondary_out = -1;
1544 /* Find the output reload; return unless there is exactly one
1545 and that one is mandatory. */
1547 for (i = 0; i < n_reloads; i++)
1548 if (reload_out[i] != 0)
1550 if (output_reload >= 0)
1555 if (output_reload < 0 || reload_optional[output_reload])
1558 /* An input-output reload isn't combinable. */
1560 if (reload_in[output_reload] != 0)
1563 /* If this reload is for an earlyclobber operand, we can't do anything. */
1564 if (earlyclobber_operand_p (reload_out[output_reload]))
1567 /* Check each input reload; can we combine it? */
1569 for (i = 0; i < n_reloads; i++)
1570 if (reload_in[i] && ! reload_optional[i] && ! reload_nocombine[i]
1571 /* Life span of this reload must not extend past main insn. */
1572 && reload_when_needed[i] != RELOAD_FOR_OUTPUT_ADDRESS
1573 && reload_when_needed[i] != RELOAD_FOR_OUTADDR_ADDRESS
1574 && reload_when_needed[i] != RELOAD_OTHER
1575 && (CLASS_MAX_NREGS (reload_reg_class[i], reload_inmode[i])
1576 == CLASS_MAX_NREGS (reload_reg_class[output_reload],
1577 reload_outmode[output_reload]))
1578 && reload_inc[i] == 0
1579 && reload_reg_rtx[i] == 0
1580 #ifdef SECONDARY_MEMORY_NEEDED
1581 /* Don't combine two reloads with different secondary
1582 memory locations. */
1583 && (secondary_memlocs_elim[(int) reload_outmode[output_reload]][reload_opnum[i]] == 0
1584 || secondary_memlocs_elim[(int) reload_outmode[output_reload]][reload_opnum[output_reload]] == 0
1585 || rtx_equal_p (secondary_memlocs_elim[(int) reload_outmode[output_reload]][reload_opnum[i]],
1586 secondary_memlocs_elim[(int) reload_outmode[output_reload]][reload_opnum[output_reload]]))
1588 && (SMALL_REGISTER_CLASSES
1589 ? (reload_reg_class[i] == reload_reg_class[output_reload])
1590 : (reg_class_subset_p (reload_reg_class[i],
1591 reload_reg_class[output_reload])
1592 || reg_class_subset_p (reload_reg_class[output_reload],
1593 reload_reg_class[i])))
1594 && (MATCHES (reload_in[i], reload_out[output_reload])
1595 /* Args reversed because the first arg seems to be
1596 the one that we imagine being modified
1597 while the second is the one that might be affected. */
1598 || (! reg_overlap_mentioned_for_reload_p (reload_out[output_reload],
1600 /* However, if the input is a register that appears inside
1601 the output, then we also can't share.
1602 Imagine (set (mem (reg 69)) (plus (reg 69) ...)).
1603 If the same reload reg is used for both reg 69 and the
1604 result to be stored in memory, then that result
1605 will clobber the address of the memory ref. */
1606 && ! (GET_CODE (reload_in[i]) == REG
1607 && reg_overlap_mentioned_for_reload_p (reload_in[i],
1608 reload_out[output_reload]))))
1609 && (reg_class_size[(int) reload_reg_class[i]]
1610 || SMALL_REGISTER_CLASSES)
1611 /* We will allow making things slightly worse by combining an
1612 input and an output, but no worse than that. */
1613 && (reload_when_needed[i] == RELOAD_FOR_INPUT
1614 || reload_when_needed[i] == RELOAD_FOR_OUTPUT))
1618 /* We have found a reload to combine with! */
1619 reload_out[i] = reload_out[output_reload];
1620 reload_outmode[i] = reload_outmode[output_reload];
1621 /* Mark the old output reload as inoperative. */
1622 reload_out[output_reload] = 0;
1623 /* The combined reload is needed for the entire insn. */
1624 reload_when_needed[i] = RELOAD_OTHER;
1625 /* If the output reload had a secondary reload, copy it. */
1626 if (reload_secondary_out_reload[output_reload] != -1)
1628 reload_secondary_out_reload[i]
1629 = reload_secondary_out_reload[output_reload];
1630 reload_secondary_out_icode[i]
1631 = reload_secondary_out_icode[output_reload];
1634 #ifdef SECONDARY_MEMORY_NEEDED
1635 /* Copy any secondary MEM. */
1636 if (secondary_memlocs_elim[(int) reload_outmode[output_reload]][reload_opnum[output_reload]] != 0)
1637 secondary_memlocs_elim[(int) reload_outmode[output_reload]][reload_opnum[i]]
1638 = secondary_memlocs_elim[(int) reload_outmode[output_reload]][reload_opnum[output_reload]];
1640 /* If required, minimize the register class. */
1641 if (reg_class_subset_p (reload_reg_class[output_reload],
1642 reload_reg_class[i]))
1643 reload_reg_class[i] = reload_reg_class[output_reload];
1645 /* Transfer all replacements from the old reload to the combined. */
1646 for (j = 0; j < n_replacements; j++)
1647 if (replacements[j].what == output_reload)
1648 replacements[j].what = i;
1653 /* If this insn has only one operand that is modified or written (assumed
1654 to be the first), it must be the one corresponding to this reload. It
1655 is safe to use anything that dies in this insn for that output provided
1656 that it does not occur in the output (we already know it isn't an
1657 earlyclobber. If this is an asm insn, give up. */
1659 if (INSN_CODE (this_insn) == -1)
1662 for (i = 1; i < insn_n_operands[INSN_CODE (this_insn)]; i++)
1663 if (insn_operand_constraint[INSN_CODE (this_insn)][i][0] == '='
1664 || insn_operand_constraint[INSN_CODE (this_insn)][i][0] == '+')
1667 /* See if some hard register that dies in this insn and is not used in
1668 the output is the right class. Only works if the register we pick
1669 up can fully hold our output reload. */
1670 for (note = REG_NOTES (this_insn); note; note = XEXP (note, 1))
1671 if (REG_NOTE_KIND (note) == REG_DEAD
1672 && GET_CODE (XEXP (note, 0)) == REG
1673 && ! reg_overlap_mentioned_for_reload_p (XEXP (note, 0),
1674 reload_out[output_reload])
1675 && REGNO (XEXP (note, 0)) < FIRST_PSEUDO_REGISTER
1676 && HARD_REGNO_MODE_OK (REGNO (XEXP (note, 0)), reload_outmode[output_reload])
1677 && TEST_HARD_REG_BIT (reg_class_contents[(int) reload_reg_class[output_reload]],
1678 REGNO (XEXP (note, 0)))
1679 && (HARD_REGNO_NREGS (REGNO (XEXP (note, 0)), reload_outmode[output_reload])
1680 <= HARD_REGNO_NREGS (REGNO (XEXP (note, 0)), GET_MODE (XEXP (note, 0))))
1681 /* Ensure that a secondary or tertiary reload for this output
1682 won't want this register. */
1683 && ((secondary_out = reload_secondary_out_reload[output_reload]) == -1
1684 || (! (TEST_HARD_REG_BIT
1685 (reg_class_contents[(int) reload_reg_class[secondary_out]],
1686 REGNO (XEXP (note, 0))))
1687 && ((secondary_out = reload_secondary_out_reload[secondary_out]) == -1
1688 || ! (TEST_HARD_REG_BIT
1689 (reg_class_contents[(int) reload_reg_class[secondary_out]],
1690 REGNO (XEXP (note, 0)))))))
1691 && ! fixed_regs[REGNO (XEXP (note, 0))])
1693 reload_reg_rtx[output_reload]
1694 = gen_rtx_REG (reload_outmode[output_reload],
1695 REGNO (XEXP (note, 0)));
1700 /* Try to find a reload register for an in-out reload (expressions IN and OUT).
1701 See if one of IN and OUT is a register that may be used;
1702 this is desirable since a spill-register won't be needed.
1703 If so, return the register rtx that proves acceptable.
1705 INLOC and OUTLOC are locations where IN and OUT appear in the insn.
1706 CLASS is the register class required for the reload.
1708 If FOR_REAL is >= 0, it is the number of the reload,
1709 and in some cases when it can be discovered that OUT doesn't need
1710 to be computed, clear out reload_out[FOR_REAL].
1712 If FOR_REAL is -1, this should not be done, because this call
1713 is just to see if a register can be found, not to find and install it.
1715 EARLYCLOBBER is non-zero if OUT is an earlyclobber operand. This
1716 puts an additional constraint on being able to use IN for OUT since
1717 IN must not appear elsewhere in the insn (it is assumed that IN itself
1718 is safe from the earlyclobber). */
1721 find_dummy_reload (real_in, real_out, inloc, outloc,
1722 inmode, outmode, class, for_real, earlyclobber)
1723 rtx real_in, real_out;
1724 rtx *inloc, *outloc;
1725 enum machine_mode inmode, outmode;
1726 enum reg_class class;
1736 /* If operands exceed a word, we can't use either of them
1737 unless they have the same size. */
1738 if (GET_MODE_SIZE (outmode) != GET_MODE_SIZE (inmode)
1739 && (GET_MODE_SIZE (outmode) > UNITS_PER_WORD
1740 || GET_MODE_SIZE (inmode) > UNITS_PER_WORD))
1743 /* Find the inside of any subregs. */
1744 while (GET_CODE (out) == SUBREG)
1746 out_offset = SUBREG_WORD (out);
1747 out = SUBREG_REG (out);
1749 while (GET_CODE (in) == SUBREG)
1751 in_offset = SUBREG_WORD (in);
1752 in = SUBREG_REG (in);
1755 /* Narrow down the reg class, the same way push_reload will;
1756 otherwise we might find a dummy now, but push_reload won't. */
1757 class = PREFERRED_RELOAD_CLASS (in, class);
1759 /* See if OUT will do. */
1760 if (GET_CODE (out) == REG
1761 && REGNO (out) < FIRST_PSEUDO_REGISTER)
1763 register int regno = REGNO (out) + out_offset;
1764 int nwords = HARD_REGNO_NREGS (regno, outmode);
1767 /* When we consider whether the insn uses OUT,
1768 ignore references within IN. They don't prevent us
1769 from copying IN into OUT, because those refs would
1770 move into the insn that reloads IN.
1772 However, we only ignore IN in its role as this reload.
1773 If the insn uses IN elsewhere and it contains OUT,
1774 that counts. We can't be sure it's the "same" operand
1775 so it might not go through this reload. */
1777 *inloc = const0_rtx;
1779 if (regno < FIRST_PSEUDO_REGISTER
1780 /* A fixed reg that can overlap other regs better not be used
1781 for reloading in any way. */
1782 #ifdef OVERLAPPING_REGNO_P
1783 && ! (fixed_regs[regno] && OVERLAPPING_REGNO_P (regno))
1785 && ! refers_to_regno_for_reload_p (regno, regno + nwords,
1786 PATTERN (this_insn), outloc))
1789 for (i = 0; i < nwords; i++)
1790 if (! TEST_HARD_REG_BIT (reg_class_contents[(int) class],
1796 if (GET_CODE (real_out) == REG)
1799 value = gen_rtx_REG (outmode, regno);
1806 /* Consider using IN if OUT was not acceptable
1807 or if OUT dies in this insn (like the quotient in a divmod insn).
1808 We can't use IN unless it is dies in this insn,
1809 which means we must know accurately which hard regs are live.
1810 Also, the result can't go in IN if IN is used within OUT,
1811 or if OUT is an earlyclobber and IN appears elsewhere in the insn. */
1812 if (hard_regs_live_known
1813 && GET_CODE (in) == REG
1814 && REGNO (in) < FIRST_PSEUDO_REGISTER
1816 || find_reg_note (this_insn, REG_UNUSED, real_out))
1817 && find_reg_note (this_insn, REG_DEAD, real_in)
1818 && !fixed_regs[REGNO (in)]
1819 && HARD_REGNO_MODE_OK (REGNO (in),
1820 /* The only case where out and real_out might
1821 have different modes is where real_out
1822 is a subreg, and in that case, out
1824 (GET_MODE (out) != VOIDmode
1825 ? GET_MODE (out) : outmode)))
1827 register int regno = REGNO (in) + in_offset;
1828 int nwords = HARD_REGNO_NREGS (regno, inmode);
1830 if (! refers_to_regno_for_reload_p (regno, regno + nwords, out, NULL_PTR)
1831 && ! hard_reg_set_here_p (regno, regno + nwords,
1832 PATTERN (this_insn))
1834 || ! refers_to_regno_for_reload_p (regno, regno + nwords,
1835 PATTERN (this_insn), inloc)))
1838 for (i = 0; i < nwords; i++)
1839 if (! TEST_HARD_REG_BIT (reg_class_contents[(int) class],
1845 /* If we were going to use OUT as the reload reg
1846 and changed our mind, it means OUT is a dummy that
1847 dies here. So don't bother copying value to it. */
1848 if (for_real >= 0 && value == real_out)
1849 reload_out[for_real] = 0;
1850 if (GET_CODE (real_in) == REG)
1853 value = gen_rtx_REG (inmode, regno);
1861 /* This page contains subroutines used mainly for determining
1862 whether the IN or an OUT of a reload can serve as the
1865 /* Return 1 if X is an operand of an insn that is being earlyclobbered. */
1868 earlyclobber_operand_p (x)
1873 for (i = 0; i < n_earlyclobbers; i++)
1874 if (reload_earlyclobbers[i] == x)
1880 /* Return 1 if expression X alters a hard reg in the range
1881 from BEG_REGNO (inclusive) to END_REGNO (exclusive),
1882 either explicitly or in the guise of a pseudo-reg allocated to REGNO.
1883 X should be the body of an instruction. */
1886 hard_reg_set_here_p (beg_regno, end_regno, x)
1887 register int beg_regno, end_regno;
1890 if (GET_CODE (x) == SET || GET_CODE (x) == CLOBBER)
1892 register rtx op0 = SET_DEST (x);
1893 while (GET_CODE (op0) == SUBREG)
1894 op0 = SUBREG_REG (op0);
1895 if (GET_CODE (op0) == REG)
1897 register int r = REGNO (op0);
1898 /* See if this reg overlaps range under consideration. */
1900 && r + HARD_REGNO_NREGS (r, GET_MODE (op0)) > beg_regno)
1904 else if (GET_CODE (x) == PARALLEL)
1906 register int i = XVECLEN (x, 0) - 1;
1908 if (hard_reg_set_here_p (beg_regno, end_regno, XVECEXP (x, 0, i)))
1915 /* Return 1 if ADDR is a valid memory address for mode MODE,
1916 and check that each pseudo reg has the proper kind of
1920 strict_memory_address_p (mode, addr)
1921 enum machine_mode mode;
1924 GO_IF_LEGITIMATE_ADDRESS (mode, addr, win);
1931 /* Like rtx_equal_p except that it allows a REG and a SUBREG to match
1932 if they are the same hard reg, and has special hacks for
1933 autoincrement and autodecrement.
1934 This is specifically intended for find_reloads to use
1935 in determining whether two operands match.
1936 X is the operand whose number is the lower of the two.
1938 The value is 2 if Y contains a pre-increment that matches
1939 a non-incrementing address in X. */
1941 /* ??? To be completely correct, we should arrange to pass
1942 for X the output operand and for Y the input operand.
1943 For now, we assume that the output operand has the lower number
1944 because that is natural in (SET output (... input ...)). */
1947 operands_match_p (x, y)
1951 register RTX_CODE code = GET_CODE (x);
1957 if ((code == REG || (code == SUBREG && GET_CODE (SUBREG_REG (x)) == REG))
1958 && (GET_CODE (y) == REG || (GET_CODE (y) == SUBREG
1959 && GET_CODE (SUBREG_REG (y)) == REG)))
1965 i = REGNO (SUBREG_REG (x));
1966 if (i >= FIRST_PSEUDO_REGISTER)
1968 i += SUBREG_WORD (x);
1973 if (GET_CODE (y) == SUBREG)
1975 j = REGNO (SUBREG_REG (y));
1976 if (j >= FIRST_PSEUDO_REGISTER)
1978 j += SUBREG_WORD (y);
1983 /* On a WORDS_BIG_ENDIAN machine, point to the last register of a
1984 multiple hard register group, so that for example (reg:DI 0) and
1985 (reg:SI 1) will be considered the same register. */
1986 if (WORDS_BIG_ENDIAN && GET_MODE_SIZE (GET_MODE (x)) > UNITS_PER_WORD
1987 && i < FIRST_PSEUDO_REGISTER)
1988 i += (GET_MODE_SIZE (GET_MODE (x)) / UNITS_PER_WORD) - 1;
1989 if (WORDS_BIG_ENDIAN && GET_MODE_SIZE (GET_MODE (y)) > UNITS_PER_WORD
1990 && j < FIRST_PSEUDO_REGISTER)
1991 j += (GET_MODE_SIZE (GET_MODE (y)) / UNITS_PER_WORD) - 1;
1995 /* If two operands must match, because they are really a single
1996 operand of an assembler insn, then two postincrements are invalid
1997 because the assembler insn would increment only once.
1998 On the other hand, an postincrement matches ordinary indexing
1999 if the postincrement is the output operand. */
2000 if (code == POST_DEC || code == POST_INC)
2001 return operands_match_p (XEXP (x, 0), y);
2002 /* Two preincrements are invalid
2003 because the assembler insn would increment only once.
2004 On the other hand, an preincrement matches ordinary indexing
2005 if the preincrement is the input operand.
2006 In this case, return 2, since some callers need to do special
2007 things when this happens. */
2008 if (GET_CODE (y) == PRE_DEC || GET_CODE (y) == PRE_INC)
2009 return operands_match_p (x, XEXP (y, 0)) ? 2 : 0;
2013 /* Now we have disposed of all the cases
2014 in which different rtx codes can match. */
2015 if (code != GET_CODE (y))
2017 if (code == LABEL_REF)
2018 return XEXP (x, 0) == XEXP (y, 0);
2019 if (code == SYMBOL_REF)
2020 return XSTR (x, 0) == XSTR (y, 0);
2022 /* (MULT:SI x y) and (MULT:HI x y) are NOT equivalent. */
2024 if (GET_MODE (x) != GET_MODE (y))
2027 /* Compare the elements. If any pair of corresponding elements
2028 fail to match, return 0 for the whole things. */
2031 fmt = GET_RTX_FORMAT (code);
2032 for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
2038 if (XWINT (x, i) != XWINT (y, i))
2043 if (XINT (x, i) != XINT (y, i))
2048 val = operands_match_p (XEXP (x, i), XEXP (y, i));
2051 /* If any subexpression returns 2,
2052 we should return 2 if we are successful. */
2060 /* It is believed that rtx's at this level will never
2061 contain anything but integers and other rtx's,
2062 except for within LABEL_REFs and SYMBOL_REFs. */
2067 return 1 + success_2;
2070 /* Return the number of times character C occurs in string S. */
2073 n_occurrences (c, s)
2083 /* Describe the range of registers or memory referenced by X.
2084 If X is a register, set REG_FLAG and put the first register
2085 number into START and the last plus one into END.
2086 If X is a memory reference, put a base address into BASE
2087 and a range of integer offsets into START and END.
2088 If X is pushing on the stack, we can assume it causes no trouble,
2089 so we set the SAFE field. */
2091 static struct decomposition
2095 struct decomposition val;
2101 if (GET_CODE (x) == MEM)
2103 rtx base, offset = 0;
2104 rtx addr = XEXP (x, 0);
2106 if (GET_CODE (addr) == PRE_DEC || GET_CODE (addr) == PRE_INC
2107 || GET_CODE (addr) == POST_DEC || GET_CODE (addr) == POST_INC)
2109 val.base = XEXP (addr, 0);
2110 val.start = - GET_MODE_SIZE (GET_MODE (x));
2111 val.end = GET_MODE_SIZE (GET_MODE (x));
2112 val.safe = REGNO (val.base) == STACK_POINTER_REGNUM;
2116 if (GET_CODE (addr) == CONST)
2118 addr = XEXP (addr, 0);
2121 if (GET_CODE (addr) == PLUS)
2123 if (CONSTANT_P (XEXP (addr, 0)))
2125 base = XEXP (addr, 1);
2126 offset = XEXP (addr, 0);
2128 else if (CONSTANT_P (XEXP (addr, 1)))
2130 base = XEXP (addr, 0);
2131 offset = XEXP (addr, 1);
2138 offset = const0_rtx;
2140 if (GET_CODE (offset) == CONST)
2141 offset = XEXP (offset, 0);
2142 if (GET_CODE (offset) == PLUS)
2144 if (GET_CODE (XEXP (offset, 0)) == CONST_INT)
2146 base = gen_rtx_PLUS (GET_MODE (base), base, XEXP (offset, 1));
2147 offset = XEXP (offset, 0);
2149 else if (GET_CODE (XEXP (offset, 1)) == CONST_INT)
2151 base = gen_rtx_PLUS (GET_MODE (base), base, XEXP (offset, 0));
2152 offset = XEXP (offset, 1);
2156 base = gen_rtx_PLUS (GET_MODE (base), base, offset);
2157 offset = const0_rtx;
2160 else if (GET_CODE (offset) != CONST_INT)
2162 base = gen_rtx_PLUS (GET_MODE (base), base, offset);
2163 offset = const0_rtx;
2166 if (all_const && GET_CODE (base) == PLUS)
2167 base = gen_rtx_CONST (GET_MODE (base), base);
2169 if (GET_CODE (offset) != CONST_INT)
2172 val.start = INTVAL (offset);
2173 val.end = val.start + GET_MODE_SIZE (GET_MODE (x));
2177 else if (GET_CODE (x) == REG)
2180 val.start = true_regnum (x);
2183 /* A pseudo with no hard reg. */
2184 val.start = REGNO (x);
2185 val.end = val.start + 1;
2189 val.end = val.start + HARD_REGNO_NREGS (val.start, GET_MODE (x));
2191 else if (GET_CODE (x) == SUBREG)
2193 if (GET_CODE (SUBREG_REG (x)) != REG)
2194 /* This could be more precise, but it's good enough. */
2195 return decompose (SUBREG_REG (x));
2197 val.start = true_regnum (x);
2199 return decompose (SUBREG_REG (x));
2202 val.end = val.start + HARD_REGNO_NREGS (val.start, GET_MODE (x));
2204 else if (CONSTANT_P (x)
2205 /* This hasn't been assigned yet, so it can't conflict yet. */
2206 || GET_CODE (x) == SCRATCH)
2213 /* Return 1 if altering Y will not modify the value of X.
2214 Y is also described by YDATA, which should be decompose (Y). */
2217 immune_p (x, y, ydata)
2219 struct decomposition ydata;
2221 struct decomposition xdata;
2224 return !refers_to_regno_for_reload_p (ydata.start, ydata.end, x, NULL_PTR);
2228 if (GET_CODE (y) != MEM)
2230 /* If Y is memory and X is not, Y can't affect X. */
2231 if (GET_CODE (x) != MEM)
2234 xdata = decompose (x);
2236 if (! rtx_equal_p (xdata.base, ydata.base))
2238 /* If bases are distinct symbolic constants, there is no overlap. */
2239 if (CONSTANT_P (xdata.base) && CONSTANT_P (ydata.base))
2241 /* Constants and stack slots never overlap. */
2242 if (CONSTANT_P (xdata.base)
2243 && (ydata.base == frame_pointer_rtx
2244 || ydata.base == hard_frame_pointer_rtx
2245 || ydata.base == stack_pointer_rtx))
2247 if (CONSTANT_P (ydata.base)
2248 && (xdata.base == frame_pointer_rtx
2249 || xdata.base == hard_frame_pointer_rtx
2250 || xdata.base == stack_pointer_rtx))
2252 /* If either base is variable, we don't know anything. */
2257 return (xdata.start >= ydata.end || ydata.start >= xdata.end);
2260 /* Similar, but calls decompose. */
2263 safe_from_earlyclobber (op, clobber)
2266 struct decomposition early_data;
2268 early_data = decompose (clobber);
2269 return immune_p (op, clobber, early_data);
2272 /* Main entry point of this file: search the body of INSN
2273 for values that need reloading and record them with push_reload.
2274 REPLACE nonzero means record also where the values occur
2275 so that subst_reloads can be used.
2277 IND_LEVELS says how many levels of indirection are supported by this
2278 machine; a value of zero means that a memory reference is not a valid
2281 LIVE_KNOWN says we have valid information about which hard
2282 regs are live at each point in the program; this is true when
2283 we are called from global_alloc but false when stupid register
2284 allocation has been done.
2286 RELOAD_REG_P if nonzero is a vector indexed by hard reg number
2287 which is nonnegative if the reg has been commandeered for reloading into.
2288 It is copied into STATIC_RELOAD_REG_P and referenced from there
2289 by various subroutines. */
2292 find_reloads (insn, replace, ind_levels, live_known, reload_reg_p)
2294 int replace, ind_levels;
2296 short *reload_reg_p;
2298 #ifdef REGISTER_CONSTRAINTS
2300 register int insn_code_number;
2303 /* These are the constraints for the insn. We don't change them. */
2304 char *constraints1[MAX_RECOG_OPERANDS];
2305 /* These start out as the constraints for the insn
2306 and they are chewed up as we consider alternatives. */
2307 char *constraints[MAX_RECOG_OPERANDS];
2308 /* These are the preferred classes for an operand, or NO_REGS if it isn't
2310 enum reg_class preferred_class[MAX_RECOG_OPERANDS];
2311 char pref_or_nothing[MAX_RECOG_OPERANDS];
2312 /* Nonzero for a MEM operand whose entire address needs a reload. */
2313 int address_reloaded[MAX_RECOG_OPERANDS];
2314 /* Value of enum reload_type to use for operand. */
2315 enum reload_type operand_type[MAX_RECOG_OPERANDS];
2316 /* Value of enum reload_type to use within address of operand. */
2317 enum reload_type address_type[MAX_RECOG_OPERANDS];
2318 /* Save the usage of each operand. */
2319 enum reload_usage { RELOAD_READ, RELOAD_READ_WRITE, RELOAD_WRITE } modified[MAX_RECOG_OPERANDS];
2320 int no_input_reloads = 0, no_output_reloads = 0;
2322 int this_alternative[MAX_RECOG_OPERANDS];
2323 char this_alternative_win[MAX_RECOG_OPERANDS];
2324 char this_alternative_offmemok[MAX_RECOG_OPERANDS];
2325 char this_alternative_earlyclobber[MAX_RECOG_OPERANDS];
2326 int this_alternative_matches[MAX_RECOG_OPERANDS];
2328 int goal_alternative[MAX_RECOG_OPERANDS];
2329 int this_alternative_number;
2330 int goal_alternative_number;
2331 int operand_reloadnum[MAX_RECOG_OPERANDS];
2332 int goal_alternative_matches[MAX_RECOG_OPERANDS];
2333 int goal_alternative_matched[MAX_RECOG_OPERANDS];
2334 char goal_alternative_win[MAX_RECOG_OPERANDS];
2335 char goal_alternative_offmemok[MAX_RECOG_OPERANDS];
2336 char goal_alternative_earlyclobber[MAX_RECOG_OPERANDS];
2337 int goal_alternative_swapped;
2341 char operands_match[MAX_RECOG_OPERANDS][MAX_RECOG_OPERANDS];
2342 rtx substed_operand[MAX_RECOG_OPERANDS];
2343 rtx body = PATTERN (insn);
2344 rtx set = single_set (insn);
2345 int goal_earlyclobber, this_earlyclobber;
2346 enum machine_mode operand_mode[MAX_RECOG_OPERANDS];
2347 /* Cache the last regno for the last pseudo we did an output reload
2348 for in case the next insn uses it. */
2349 static int last_output_reload_regno = -1;
2352 this_insn_is_asm = 0; /* Tentative. */
2356 n_earlyclobbers = 0;
2357 replace_reloads = replace;
2358 hard_regs_live_known = live_known;
2359 static_reload_reg_p = reload_reg_p;
2361 /* JUMP_INSNs and CALL_INSNs are not allowed to have any output reloads;
2362 neither are insns that SET cc0. Insns that use CC0 are not allowed
2363 to have any input reloads. */
2364 if (GET_CODE (insn) == JUMP_INSN || GET_CODE (insn) == CALL_INSN)
2365 no_output_reloads = 1;
2368 if (reg_referenced_p (cc0_rtx, PATTERN (insn)))
2369 no_input_reloads = 1;
2370 if (reg_set_p (cc0_rtx, PATTERN (insn)))
2371 no_output_reloads = 1;
2374 #ifdef SECONDARY_MEMORY_NEEDED
2375 /* The eliminated forms of any secondary memory locations are per-insn, so
2376 clear them out here. */
2378 bzero ((char *) secondary_memlocs_elim, sizeof secondary_memlocs_elim);
2381 /* Find what kind of insn this is. NOPERANDS gets number of operands.
2382 Make OPERANDS point to a vector of operand values.
2383 Make OPERAND_LOCS point to a vector of pointers to
2384 where the operands were found.
2385 Fill CONSTRAINTS and CONSTRAINTS1 with pointers to the
2386 constraint-strings for this insn.
2387 Return if the insn needs no reload processing. */
2389 switch (GET_CODE (body))
2399 /* Dispose quickly of (set (reg..) (reg..)) if both have hard regs and it
2400 is cheap to move between them. If it is not, there may not be an insn
2401 to do the copy, so we may need a reload. */
2402 if (GET_CODE (SET_DEST (body)) == REG
2403 && REGNO (SET_DEST (body)) < FIRST_PSEUDO_REGISTER
2404 && GET_CODE (SET_SRC (body)) == REG
2405 && REGNO (SET_SRC (body)) < FIRST_PSEUDO_REGISTER
2406 && REGISTER_MOVE_COST (REGNO_REG_CLASS (REGNO (SET_SRC (body))),
2407 REGNO_REG_CLASS (REGNO (SET_DEST (body)))) == 2)
2411 reload_n_operands = noperands = asm_noperands (body);
2414 /* This insn is an `asm' with operands. */
2416 insn_code_number = -1;
2417 this_insn_is_asm = 1;
2419 /* expand_asm_operands makes sure there aren't too many operands. */
2420 if (noperands > MAX_RECOG_OPERANDS)
2423 /* Now get the operand values and constraints out of the insn. */
2425 decode_asm_operands (body, recog_operand, recog_operand_loc,
2426 constraints, operand_mode);
2429 bcopy ((char *) constraints, (char *) constraints1,
2430 noperands * sizeof (char *));
2431 n_alternatives = n_occurrences (',', constraints[0]) + 1;
2432 for (i = 1; i < noperands; i++)
2433 if (n_alternatives != n_occurrences (',', constraints[i]) + 1)
2435 error_for_asm (insn, "operand constraints differ in number of alternatives");
2436 /* Avoid further trouble with this insn. */
2437 PATTERN (insn) = gen_rtx_USE (VOIDmode, const0_rtx);
2446 /* Ordinary insn: recognize it, get the operands via insn_extract
2447 and get the constraints. */
2449 insn_code_number = recog_memoized (insn);
2450 if (insn_code_number < 0)
2451 fatal_insn_not_found (insn);
2453 reload_n_operands = noperands = insn_n_operands[insn_code_number];
2454 n_alternatives = insn_n_alternatives[insn_code_number];
2455 /* Just return "no reloads" if insn has no operands with constraints. */
2456 if (n_alternatives == 0)
2458 insn_extract (insn);
2459 for (i = 0; i < noperands; i++)
2461 constraints[i] = constraints1[i]
2462 = insn_operand_constraint[insn_code_number][i];
2463 operand_mode[i] = insn_operand_mode[insn_code_number][i];
2472 /* If we will need to know, later, whether some pair of operands
2473 are the same, we must compare them now and save the result.
2474 Reloading the base and index registers will clobber them
2475 and afterward they will fail to match. */
2477 for (i = 0; i < noperands; i++)
2482 substed_operand[i] = recog_operand[i];
2485 modified[i] = RELOAD_READ;
2487 /* Scan this operand's constraint to see if it is an output operand,
2488 an in-out operand, is commutative, or should match another. */
2493 modified[i] = RELOAD_WRITE;
2495 modified[i] = RELOAD_READ_WRITE;
2498 /* The last operand should not be marked commutative. */
2499 if (i == noperands - 1)
2501 if (this_insn_is_asm)
2502 warning_for_asm (this_insn,
2503 "`%%' constraint used with last operand");
2510 else if (c >= '0' && c <= '9')
2513 operands_match[c][i]
2514 = operands_match_p (recog_operand[c], recog_operand[i]);
2516 /* An operand may not match itself. */
2519 if (this_insn_is_asm)
2520 warning_for_asm (this_insn,
2521 "operand %d has constraint %d", i, c);
2526 /* If C can be commuted with C+1, and C might need to match I,
2527 then C+1 might also need to match I. */
2528 if (commutative >= 0)
2530 if (c == commutative || c == commutative + 1)
2532 int other = c + (c == commutative ? 1 : -1);
2533 operands_match[other][i]
2534 = operands_match_p (recog_operand[other], recog_operand[i]);
2536 if (i == commutative || i == commutative + 1)
2538 int other = i + (i == commutative ? 1 : -1);
2539 operands_match[c][other]
2540 = operands_match_p (recog_operand[c], recog_operand[other]);
2542 /* Note that C is supposed to be less than I.
2543 No need to consider altering both C and I because in
2544 that case we would alter one into the other. */
2550 /* Examine each operand that is a memory reference or memory address
2551 and reload parts of the addresses into index registers.
2552 Also here any references to pseudo regs that didn't get hard regs
2553 but are equivalent to constants get replaced in the insn itself
2554 with those constants. Nobody will ever see them again.
2556 Finally, set up the preferred classes of each operand. */
2558 for (i = 0; i < noperands; i++)
2560 register RTX_CODE code = GET_CODE (recog_operand[i]);
2562 address_reloaded[i] = 0;
2563 operand_type[i] = (modified[i] == RELOAD_READ ? RELOAD_FOR_INPUT
2564 : modified[i] == RELOAD_WRITE ? RELOAD_FOR_OUTPUT
2567 = (modified[i] == RELOAD_READ ? RELOAD_FOR_INPUT_ADDRESS
2568 : modified[i] == RELOAD_WRITE ? RELOAD_FOR_OUTPUT_ADDRESS
2571 if (*constraints[i] == 0)
2572 /* Ignore things like match_operator operands. */
2574 else if (constraints[i][0] == 'p')
2576 find_reloads_address (VOIDmode, NULL_PTR,
2577 recog_operand[i], recog_operand_loc[i],
2578 i, operand_type[i], ind_levels, insn);
2580 /* If we now have a simple operand where we used to have a
2581 PLUS or MULT, re-recognize and try again. */
2582 if ((GET_RTX_CLASS (GET_CODE (*recog_operand_loc[i])) == 'o'
2583 || GET_CODE (*recog_operand_loc[i]) == SUBREG)
2584 && (GET_CODE (recog_operand[i]) == MULT
2585 || GET_CODE (recog_operand[i]) == PLUS))
2587 INSN_CODE (insn) = -1;
2588 find_reloads (insn, replace, ind_levels, live_known,
2593 substed_operand[i] = recog_operand[i] = *recog_operand_loc[i];
2595 else if (code == MEM)
2597 if (find_reloads_address (GET_MODE (recog_operand[i]),
2598 recog_operand_loc[i],
2599 XEXP (recog_operand[i], 0),
2600 &XEXP (recog_operand[i], 0),
2601 i, address_type[i], ind_levels, insn))
2602 address_reloaded[i] = 1;
2603 substed_operand[i] = recog_operand[i] = *recog_operand_loc[i];
2605 else if (code == SUBREG)
2607 rtx reg = SUBREG_REG (recog_operand[i]);
2609 = find_reloads_toplev (recog_operand[i], i, address_type[i],
2612 && &SET_DEST (set) == recog_operand_loc[i]);
2614 /* If we made a MEM to load (a part of) the stackslot of a pseudo
2615 that didn't get a hard register, emit a USE with a REG_EQUAL
2616 note in front so that we might inherit a previous, possibly
2619 if (GET_CODE (op) == MEM
2620 && GET_CODE (reg) == REG
2621 && (GET_MODE_SIZE (GET_MODE (reg))
2622 >= GET_MODE_SIZE (GET_MODE (op))))
2623 REG_NOTES (emit_insn_before (gen_rtx_USE (VOIDmode, reg), insn))
2624 = gen_rtx_EXPR_LIST (REG_EQUAL,
2625 reg_equiv_memory_loc[REGNO (reg)], NULL_RTX);
2627 substed_operand[i] = recog_operand[i] = *recog_operand_loc[i] = op;
2629 else if (code == PLUS || GET_RTX_CLASS (code) == '1')
2630 /* We can get a PLUS as an "operand" as a result of register
2631 elimination. See eliminate_regs and gen_reload. We handle
2632 a unary operator by reloading the operand. */
2633 substed_operand[i] = recog_operand[i] = *recog_operand_loc[i]
2634 = find_reloads_toplev (recog_operand[i], i, address_type[i],
2636 else if (code == REG)
2638 /* This is equivalent to calling find_reloads_toplev.
2639 The code is duplicated for speed.
2640 When we find a pseudo always equivalent to a constant,
2641 we replace it by the constant. We must be sure, however,
2642 that we don't try to replace it in the insn in which it
2644 register int regno = REGNO (recog_operand[i]);
2645 if (reg_equiv_constant[regno] != 0
2646 && (set == 0 || &SET_DEST (set) != recog_operand_loc[i]))
2648 /* Record the existing mode so that the check if constants are
2649 allowed will work when operand_mode isn't specified. */
2651 if (operand_mode[i] == VOIDmode)
2652 operand_mode[i] = GET_MODE (recog_operand[i]);
2654 substed_operand[i] = recog_operand[i]
2655 = reg_equiv_constant[regno];
2657 #if 0 /* This might screw code in reload1.c to delete prior output-reload
2658 that feeds this insn. */
2659 if (reg_equiv_mem[regno] != 0)
2660 substed_operand[i] = recog_operand[i]
2661 = reg_equiv_mem[regno];
2663 if (reg_equiv_address[regno] != 0)
2665 /* If reg_equiv_address is not a constant address, copy it,
2666 since it may be shared. */
2667 /* We must rerun eliminate_regs, in case the elimination
2668 offsets have changed. */
2669 rtx address = XEXP (eliminate_regs (reg_equiv_memory_loc[regno],
2673 if (rtx_varies_p (address))
2674 address = copy_rtx (address);
2676 /* Emit a USE that shows what register is being used/modified. */
2677 REG_NOTES (emit_insn_before (gen_rtx_USE (VOIDmode,
2680 = gen_rtx_EXPR_LIST (REG_EQUAL,
2681 reg_equiv_memory_loc[regno],
2684 *recog_operand_loc[i] = recog_operand[i]
2685 = gen_rtx_MEM (GET_MODE (recog_operand[i]), address);
2686 RTX_UNCHANGING_P (recog_operand[i])
2687 = RTX_UNCHANGING_P (regno_reg_rtx[regno]);
2688 find_reloads_address (GET_MODE (recog_operand[i]),
2689 recog_operand_loc[i],
2690 XEXP (recog_operand[i], 0),
2691 &XEXP (recog_operand[i], 0),
2692 i, address_type[i], ind_levels, insn);
2693 substed_operand[i] = recog_operand[i] = *recog_operand_loc[i];
2696 /* If the operand is still a register (we didn't replace it with an
2697 equivalent), get the preferred class to reload it into. */
2698 code = GET_CODE (recog_operand[i]);
2700 = ((code == REG && REGNO (recog_operand[i]) >= FIRST_PSEUDO_REGISTER)
2701 ? reg_preferred_class (REGNO (recog_operand[i])) : NO_REGS);
2703 = (code == REG && REGNO (recog_operand[i]) >= FIRST_PSEUDO_REGISTER
2704 && reg_alternate_class (REGNO (recog_operand[i])) == NO_REGS);
2707 /* If this is simply a copy from operand 1 to operand 0, merge the
2708 preferred classes for the operands. */
2709 if (set != 0 && noperands >= 2 && recog_operand[0] == SET_DEST (set)
2710 && recog_operand[1] == SET_SRC (set))
2712 preferred_class[0] = preferred_class[1]
2713 = reg_class_subunion[(int) preferred_class[0]][(int) preferred_class[1]];
2714 pref_or_nothing[0] |= pref_or_nothing[1];
2715 pref_or_nothing[1] |= pref_or_nothing[0];
2718 /* Now see what we need for pseudo-regs that didn't get hard regs
2719 or got the wrong kind of hard reg. For this, we must consider
2720 all the operands together against the register constraints. */
2722 best = MAX_RECOG_OPERANDS * 2 + 600;
2725 goal_alternative_swapped = 0;
2728 /* The constraints are made of several alternatives.
2729 Each operand's constraint looks like foo,bar,... with commas
2730 separating the alternatives. The first alternatives for all
2731 operands go together, the second alternatives go together, etc.
2733 First loop over alternatives. */
2735 for (this_alternative_number = 0;
2736 this_alternative_number < n_alternatives;
2737 this_alternative_number++)
2739 /* Loop over operands for one constraint alternative. */
2740 /* LOSERS counts those that don't fit this alternative
2741 and would require loading. */
2743 /* BAD is set to 1 if it some operand can't fit this alternative
2744 even after reloading. */
2746 /* REJECT is a count of how undesirable this alternative says it is
2747 if any reloading is required. If the alternative matches exactly
2748 then REJECT is ignored, but otherwise it gets this much
2749 counted against it in addition to the reloading needed. Each
2750 ? counts three times here since we want the disparaging caused by
2751 a bad register class to only count 1/3 as much. */
2754 this_earlyclobber = 0;
2756 for (i = 0; i < noperands; i++)
2758 register char *p = constraints[i];
2759 register int win = 0;
2760 /* 0 => this operand can be reloaded somehow for this alternative */
2762 /* 0 => this operand can be reloaded if the alternative allows regs. */
2765 register rtx operand = recog_operand[i];
2767 /* Nonzero means this is a MEM that must be reloaded into a reg
2768 regardless of what the constraint says. */
2769 int force_reload = 0;
2771 /* Nonzero if a constant forced into memory would be OK for this
2774 int earlyclobber = 0;
2776 /* If the predicate accepts a unary operator, it means that
2777 we need to reload the operand, but do not do this for
2778 match_operator and friends. */
2779 if (GET_RTX_CLASS (GET_CODE (operand)) == '1' && *p != 0)
2780 operand = XEXP (operand, 0);
2782 /* If the operand is a SUBREG, extract
2783 the REG or MEM (or maybe even a constant) within.
2784 (Constants can occur as a result of reg_equiv_constant.) */
2786 while (GET_CODE (operand) == SUBREG)
2788 offset += SUBREG_WORD (operand);
2789 operand = SUBREG_REG (operand);
2790 /* Force reload if this is a constant or PLUS or if there may
2791 be a problem accessing OPERAND in the outer mode. */
2792 if (CONSTANT_P (operand)
2793 || GET_CODE (operand) == PLUS
2794 /* We must force a reload of paradoxical SUBREGs
2795 of a MEM because the alignment of the inner value
2796 may not be enough to do the outer reference. On
2797 big-endian machines, it may also reference outside
2800 On machines that extend byte operations and we have a
2801 SUBREG where both the inner and outer modes are no wider
2802 than a word and the inner mode is narrower, is integral,
2803 and gets extended when loaded from memory, combine.c has
2804 made assumptions about the behavior of the machine in such
2805 register access. If the data is, in fact, in memory we
2806 must always load using the size assumed to be in the
2807 register and let the insn do the different-sized
2810 This is doubly true if WORD_REGISTER_OPERATIONS. In
2811 this case eliminate_regs has left non-paradoxical
2812 subregs for push_reloads to see. Make sure it does
2813 by forcing the reload.
2815 ??? When is it right at this stage to have a subreg
2816 of a mem that is _not_ to be handled specialy? IMO
2817 those should have been reduced to just a mem. */
2818 || ((GET_CODE (operand) == MEM
2819 || (GET_CODE (operand)== REG
2820 && REGNO (operand) >= FIRST_PSEUDO_REGISTER))
2821 #ifndef WORD_REGISTER_OPERATIONS
2822 && (((GET_MODE_BITSIZE (GET_MODE (operand))
2823 < BIGGEST_ALIGNMENT)
2824 && (GET_MODE_SIZE (operand_mode[i])
2825 > GET_MODE_SIZE (GET_MODE (operand))))
2826 || (GET_CODE (operand) == MEM && BYTES_BIG_ENDIAN)
2827 #ifdef LOAD_EXTEND_OP
2828 || (GET_MODE_SIZE (operand_mode[i]) <= UNITS_PER_WORD
2829 && (GET_MODE_SIZE (GET_MODE (operand))
2831 && (GET_MODE_SIZE (operand_mode[i])
2832 > GET_MODE_SIZE (GET_MODE (operand)))
2833 && INTEGRAL_MODE_P (GET_MODE (operand))
2834 && LOAD_EXTEND_OP (GET_MODE (operand)) != NIL)
2839 /* Subreg of a hard reg which can't handle the subreg's mode
2840 or which would handle that mode in the wrong number of
2841 registers for subregging to work. */
2842 || (GET_CODE (operand) == REG
2843 && REGNO (operand) < FIRST_PSEUDO_REGISTER
2844 && ((GET_MODE_SIZE (operand_mode[i]) <= UNITS_PER_WORD
2845 && (GET_MODE_SIZE (GET_MODE (operand))
2847 && ((GET_MODE_SIZE (GET_MODE (operand))
2849 != HARD_REGNO_NREGS (REGNO (operand),
2850 GET_MODE (operand))))
2851 || ! HARD_REGNO_MODE_OK (REGNO (operand) + offset,
2856 this_alternative[i] = (int) NO_REGS;
2857 this_alternative_win[i] = 0;
2858 this_alternative_offmemok[i] = 0;
2859 this_alternative_earlyclobber[i] = 0;
2860 this_alternative_matches[i] = -1;
2862 /* An empty constraint or empty alternative
2863 allows anything which matched the pattern. */
2864 if (*p == 0 || *p == ',')
2867 /* Scan this alternative's specs for this operand;
2868 set WIN if the operand fits any letter in this alternative.
2869 Otherwise, clear BADOP if this operand could
2870 fit some letter after reloads,
2871 or set WINREG if this operand could fit after reloads
2872 provided the constraint allows some registers. */
2874 while (*p && (c = *p++) != ',')
2883 /* The last operand should not be marked commutative. */
2884 if (i != noperands - 1)
2897 /* Ignore rest of this alternative as far as
2898 reloading is concerned. */
2899 while (*p && *p != ',') p++;
2908 this_alternative_matches[i] = c;
2909 /* We are supposed to match a previous operand.
2910 If we do, we win if that one did.
2911 If we do not, count both of the operands as losers.
2912 (This is too conservative, since most of the time
2913 only a single reload insn will be needed to make
2914 the two operands win. As a result, this alternative
2915 may be rejected when it is actually desirable.) */
2916 if ((swapped && (c != commutative || i != commutative + 1))
2917 /* If we are matching as if two operands were swapped,
2918 also pretend that operands_match had been computed
2920 But if I is the second of those and C is the first,
2921 don't exchange them, because operands_match is valid
2922 only on one side of its diagonal. */
2924 [(c == commutative || c == commutative + 1)
2925 ? 2*commutative + 1 - c : c]
2926 [(i == commutative || i == commutative + 1)
2927 ? 2*commutative + 1 - i : i])
2928 : operands_match[c][i])
2930 /* If we are matching a non-offsettable address where an
2931 offsettable address was expected, then we must reject
2932 this combination, because we can't reload it. */
2933 if (this_alternative_offmemok[c]
2934 && GET_CODE (recog_operand[c]) == MEM
2935 && this_alternative[c] == (int) NO_REGS
2936 && ! this_alternative_win[c])
2939 win = this_alternative_win[c];
2943 /* Operands don't match. */
2945 /* Retroactively mark the operand we had to match
2946 as a loser, if it wasn't already. */
2947 if (this_alternative_win[c])
2949 this_alternative_win[c] = 0;
2950 if (this_alternative[c] == (int) NO_REGS)
2952 /* But count the pair only once in the total badness of
2953 this alternative, if the pair can be a dummy reload. */
2955 = find_dummy_reload (recog_operand[i], recog_operand[c],
2956 recog_operand_loc[i], recog_operand_loc[c],
2957 operand_mode[i], operand_mode[c],
2958 this_alternative[c], -1,
2959 this_alternative_earlyclobber[c]);
2964 /* This can be fixed with reloads if the operand
2965 we are supposed to match can be fixed with reloads. */
2967 this_alternative[i] = this_alternative[c];
2969 /* If we have to reload this operand and some previous
2970 operand also had to match the same thing as this
2971 operand, we don't know how to do that. So reject this
2973 if (! win || force_reload)
2974 for (j = 0; j < i; j++)
2975 if (this_alternative_matches[j]
2976 == this_alternative_matches[i])
2982 /* All necessary reloads for an address_operand
2983 were handled in find_reloads_address. */
2984 this_alternative[i] = (int) BASE_REG_CLASS;
2991 if (GET_CODE (operand) == MEM
2992 || (GET_CODE (operand) == REG
2993 && REGNO (operand) >= FIRST_PSEUDO_REGISTER
2994 && reg_renumber[REGNO (operand)] < 0))
2996 if (CONSTANT_P (operand)
2997 /* force_const_mem does not accept HIGH. */
2998 && GET_CODE (operand) != HIGH)
3004 if (GET_CODE (operand) == MEM
3005 && ! address_reloaded[i]
3006 && (GET_CODE (XEXP (operand, 0)) == PRE_DEC
3007 || GET_CODE (XEXP (operand, 0)) == POST_DEC))
3012 if (GET_CODE (operand) == MEM
3013 && ! address_reloaded[i]
3014 && (GET_CODE (XEXP (operand, 0)) == PRE_INC
3015 || GET_CODE (XEXP (operand, 0)) == POST_INC))
3019 /* Memory operand whose address is not offsettable. */
3023 if (GET_CODE (operand) == MEM
3024 && ! (ind_levels ? offsettable_memref_p (operand)
3025 : offsettable_nonstrict_memref_p (operand))
3026 /* Certain mem addresses will become offsettable
3027 after they themselves are reloaded. This is important;
3028 we don't want our own handling of unoffsettables
3029 to override the handling of reg_equiv_address. */
3030 && !(GET_CODE (XEXP (operand, 0)) == REG
3032 || reg_equiv_address[REGNO (XEXP (operand, 0))] != 0)))
3036 /* Memory operand whose address is offsettable. */
3040 if ((GET_CODE (operand) == MEM
3041 /* If IND_LEVELS, find_reloads_address won't reload a
3042 pseudo that didn't get a hard reg, so we have to
3043 reject that case. */
3044 && (ind_levels ? offsettable_memref_p (operand)
3045 : offsettable_nonstrict_memref_p (operand)))
3046 /* A reloaded auto-increment address is offsettable,
3047 because it is now just a simple register indirect. */
3048 || (GET_CODE (operand) == MEM
3049 && address_reloaded[i]
3050 && (GET_CODE (XEXP (operand, 0)) == PRE_INC
3051 || GET_CODE (XEXP (operand, 0)) == PRE_DEC
3052 || GET_CODE (XEXP (operand, 0)) == POST_INC
3053 || GET_CODE (XEXP (operand, 0)) == POST_DEC))
3054 /* Certain mem addresses will become offsettable
3055 after they themselves are reloaded. This is important;
3056 we don't want our own handling of unoffsettables
3057 to override the handling of reg_equiv_address. */
3058 || (GET_CODE (operand) == MEM
3059 && GET_CODE (XEXP (operand, 0)) == REG
3061 || reg_equiv_address[REGNO (XEXP (operand, 0))] != 0))
3062 || (GET_CODE (operand) == REG
3063 && REGNO (operand) >= FIRST_PSEUDO_REGISTER
3064 && reg_renumber[REGNO (operand)] < 0
3065 /* If reg_equiv_address is nonzero, we will be
3066 loading it into a register; hence it will be
3067 offsettable, but we cannot say that reg_equiv_mem
3068 is offsettable without checking. */
3069 && ((reg_equiv_mem[REGNO (operand)] != 0
3070 && offsettable_memref_p (reg_equiv_mem[REGNO (operand)]))
3071 || (reg_equiv_address[REGNO (operand)] != 0))))
3073 /* force_const_mem does not accept HIGH. */
3074 if ((CONSTANT_P (operand) && GET_CODE (operand) != HIGH)
3075 || GET_CODE (operand) == MEM)
3082 /* Output operand that is stored before the need for the
3083 input operands (and their index registers) is over. */
3084 earlyclobber = 1, this_earlyclobber = 1;
3088 #ifndef REAL_ARITHMETIC
3089 /* Match any floating double constant, but only if
3090 we can examine the bits of it reliably. */
3091 if ((HOST_FLOAT_FORMAT != TARGET_FLOAT_FORMAT
3092 || HOST_BITS_PER_WIDE_INT != BITS_PER_WORD)
3093 && GET_MODE (operand) != VOIDmode && ! flag_pretend_float)
3096 if (GET_CODE (operand) == CONST_DOUBLE)
3101 if (GET_CODE (operand) == CONST_DOUBLE)
3107 if (GET_CODE (operand) == CONST_DOUBLE
3108 && CONST_DOUBLE_OK_FOR_LETTER_P (operand, c))
3113 if (GET_CODE (operand) == CONST_INT
3114 || (GET_CODE (operand) == CONST_DOUBLE
3115 && GET_MODE (operand) == VOIDmode))
3118 if (CONSTANT_P (operand)
3119 #ifdef LEGITIMATE_PIC_OPERAND_P
3120 && (! flag_pic || LEGITIMATE_PIC_OPERAND_P (operand))
3127 if (GET_CODE (operand) == CONST_INT
3128 || (GET_CODE (operand) == CONST_DOUBLE
3129 && GET_MODE (operand) == VOIDmode))
3141 if (GET_CODE (operand) == CONST_INT
3142 && CONST_OK_FOR_LETTER_P (INTVAL (operand), c))
3152 /* A PLUS is never a valid operand, but reload can make
3153 it from a register when eliminating registers. */
3154 && GET_CODE (operand) != PLUS
3155 /* A SCRATCH is not a valid operand. */
3156 && GET_CODE (operand) != SCRATCH
3157 #ifdef LEGITIMATE_PIC_OPERAND_P
3158 && (! CONSTANT_P (operand)
3160 || LEGITIMATE_PIC_OPERAND_P (operand))
3162 && (GENERAL_REGS == ALL_REGS
3163 || GET_CODE (operand) != REG
3164 || (REGNO (operand) >= FIRST_PSEUDO_REGISTER
3165 && reg_renumber[REGNO (operand)] < 0)))
3167 /* Drop through into 'r' case */
3171 = (int) reg_class_subunion[this_alternative[i]][(int) GENERAL_REGS];
3174 #ifdef EXTRA_CONSTRAINT
3180 if (EXTRA_CONSTRAINT (operand, c))
3187 = (int) reg_class_subunion[this_alternative[i]][(int) REG_CLASS_FROM_LETTER (c)];
3190 if (GET_MODE (operand) == BLKmode)
3193 if (GET_CODE (operand) == REG
3194 && reg_fits_class_p (operand, this_alternative[i],
3195 offset, GET_MODE (recog_operand[i])))
3202 /* If this operand could be handled with a reg,
3203 and some reg is allowed, then this operand can be handled. */
3204 if (winreg && this_alternative[i] != (int) NO_REGS)
3207 /* Record which operands fit this alternative. */
3208 this_alternative_earlyclobber[i] = earlyclobber;
3209 if (win && ! force_reload)
3210 this_alternative_win[i] = 1;
3213 int const_to_mem = 0;
3215 this_alternative_offmemok[i] = offmemok;
3219 /* Alternative loses if it has no regs for a reg operand. */
3220 if (GET_CODE (operand) == REG
3221 && this_alternative[i] == (int) NO_REGS
3222 && this_alternative_matches[i] < 0)
3226 /* If this is a pseudo-register that is set in the previous
3227 insns, there's a good chance that it will already be in a
3228 spill register and we can use that spill register. So
3229 make this case cheaper.
3231 Disabled for egcs. egcs has better inheritance code and
3232 this change causes problems with the improved reload
3233 inheritance code. */
3234 if (GET_CODE (operand) == REG
3235 && REGNO (operand) >= FIRST_PSEUDO_REGISTER
3236 && REGNO (operand) == last_output_reload_regno)
3240 /* If this is a constant that is reloaded into the desired
3241 class by copying it to memory first, count that as another
3242 reload. This is consistent with other code and is
3243 required to avoid choosing another alternative when
3244 the constant is moved into memory by this function on
3245 an early reload pass. Note that the test here is
3246 precisely the same as in the code below that calls
3248 if (CONSTANT_P (operand)
3249 /* force_const_mem does not accept HIGH. */
3250 && GET_CODE (operand) != HIGH
3251 && ((PREFERRED_RELOAD_CLASS (operand,
3252 (enum reg_class) this_alternative[i])
3254 || no_input_reloads)
3255 && operand_mode[i] != VOIDmode)
3258 if (this_alternative[i] != (int) NO_REGS)
3262 /* If we can't reload this value at all, reject this
3263 alternative. Note that we could also lose due to
3264 LIMIT_RELOAD_RELOAD_CLASS, but we don't check that
3267 if (! CONSTANT_P (operand)
3268 && (enum reg_class) this_alternative[i] != NO_REGS
3269 && (PREFERRED_RELOAD_CLASS (operand,
3270 (enum reg_class) this_alternative[i])
3274 /* Alternative loses if it requires a type of reload not
3275 permitted for this insn. We can always reload SCRATCH
3276 and objects with a REG_UNUSED note. */
3277 else if (GET_CODE (operand) != SCRATCH
3278 && modified[i] != RELOAD_READ && no_output_reloads
3279 && ! find_reg_note (insn, REG_UNUSED, operand))
3281 else if (modified[i] != RELOAD_WRITE && no_input_reloads
3286 /* We prefer to reload pseudos over reloading other things,
3287 since such reloads may be able to be eliminated later.
3288 If we are reloading a SCRATCH, we won't be generating any
3289 insns, just using a register, so it is also preferred.
3290 So bump REJECT in other cases. Don't do this in the
3291 case where we are forcing a constant into memory and
3292 it will then win since we don't want to have a different
3293 alternative match then. */
3294 if (! (GET_CODE (operand) == REG
3295 && REGNO (operand) >= FIRST_PSEUDO_REGISTER)
3296 && GET_CODE (operand) != SCRATCH
3297 && ! (const_to_mem && constmemok))
3300 /* Input reloads can be inherited more often than output
3301 reloads can be removed, so penalize output reloads. */
3302 if (operand_type[i] != RELOAD_FOR_INPUT
3303 && GET_CODE (operand) != SCRATCH)
3307 /* If this operand is a pseudo register that didn't get a hard
3308 reg and this alternative accepts some register, see if the
3309 class that we want is a subset of the preferred class for this
3310 register. If not, but it intersects that class, use the
3311 preferred class instead. If it does not intersect the preferred
3312 class, show that usage of this alternative should be discouraged;
3313 it will be discouraged more still if the register is `preferred
3314 or nothing'. We do this because it increases the chance of
3315 reusing our spill register in a later insn and avoiding a pair
3316 of memory stores and loads.
3318 Don't bother with this if this alternative will accept this
3321 Don't do this for a multiword operand, since it is only a
3322 small win and has the risk of requiring more spill registers,
3323 which could cause a large loss.
3325 Don't do this if the preferred class has only one register
3326 because we might otherwise exhaust the class. */
3329 if (! win && this_alternative[i] != (int) NO_REGS
3330 && GET_MODE_SIZE (operand_mode[i]) <= UNITS_PER_WORD
3331 && reg_class_size[(int) preferred_class[i]] > 1)
3333 if (! reg_class_subset_p (this_alternative[i],
3334 preferred_class[i]))
3336 /* Since we don't have a way of forming the intersection,
3337 we just do something special if the preferred class
3338 is a subset of the class we have; that's the most
3339 common case anyway. */
3340 if (reg_class_subset_p (preferred_class[i],
3341 this_alternative[i]))
3342 this_alternative[i] = (int) preferred_class[i];
3344 reject += (2 + 2 * pref_or_nothing[i]);
3349 /* Now see if any output operands that are marked "earlyclobber"
3350 in this alternative conflict with any input operands
3351 or any memory addresses. */
3353 for (i = 0; i < noperands; i++)
3354 if (this_alternative_earlyclobber[i]
3355 && this_alternative_win[i])
3357 struct decomposition early_data;
3359 early_data = decompose (recog_operand[i]);
3361 if (modified[i] == RELOAD_READ)
3363 if (this_insn_is_asm)
3364 warning_for_asm (this_insn,
3365 "`&' constraint used with input operand");
3371 if (this_alternative[i] == NO_REGS)
3373 this_alternative_earlyclobber[i] = 0;
3374 if (this_insn_is_asm)
3375 error_for_asm (this_insn,
3376 "`&' constraint used with no register class");
3381 for (j = 0; j < noperands; j++)
3382 /* Is this an input operand or a memory ref? */
3383 if ((GET_CODE (recog_operand[j]) == MEM
3384 || modified[j] != RELOAD_WRITE)
3386 /* Ignore things like match_operator operands. */
3387 && *constraints1[j] != 0
3388 /* Don't count an input operand that is constrained to match
3389 the early clobber operand. */
3390 && ! (this_alternative_matches[j] == i
3391 && rtx_equal_p (recog_operand[i], recog_operand[j]))
3392 /* Is it altered by storing the earlyclobber operand? */
3393 && !immune_p (recog_operand[j], recog_operand[i], early_data))
3395 /* If the output is in a single-reg class,
3396 it's costly to reload it, so reload the input instead. */
3397 if (reg_class_size[this_alternative[i]] == 1
3398 && (GET_CODE (recog_operand[j]) == REG
3399 || GET_CODE (recog_operand[j]) == SUBREG))
3402 this_alternative_win[j] = 0;
3407 /* If an earlyclobber operand conflicts with something,
3408 it must be reloaded, so request this and count the cost. */
3412 this_alternative_win[i] = 0;
3413 for (j = 0; j < noperands; j++)
3414 if (this_alternative_matches[j] == i
3415 && this_alternative_win[j])
3417 this_alternative_win[j] = 0;
3423 /* If one alternative accepts all the operands, no reload required,
3424 choose that alternative; don't consider the remaining ones. */
3427 /* Unswap these so that they are never swapped at `finish'. */
3428 if (commutative >= 0)
3430 recog_operand[commutative] = substed_operand[commutative];
3431 recog_operand[commutative + 1]
3432 = substed_operand[commutative + 1];
3434 for (i = 0; i < noperands; i++)
3436 goal_alternative_win[i] = 1;
3437 goal_alternative[i] = this_alternative[i];
3438 goal_alternative_offmemok[i] = this_alternative_offmemok[i];
3439 goal_alternative_matches[i] = this_alternative_matches[i];
3440 goal_alternative_earlyclobber[i]
3441 = this_alternative_earlyclobber[i];
3443 goal_alternative_number = this_alternative_number;
3444 goal_alternative_swapped = swapped;
3445 goal_earlyclobber = this_earlyclobber;
3449 /* REJECT, set by the ! and ? constraint characters and when a register
3450 would be reloaded into a non-preferred class, discourages the use of
3451 this alternative for a reload goal. REJECT is incremented by six
3452 for each ? and two for each non-preferred class. */
3453 losers = losers * 6 + reject;
3455 /* If this alternative can be made to work by reloading,
3456 and it needs less reloading than the others checked so far,
3457 record it as the chosen goal for reloading. */
3458 if (! bad && best > losers)
3460 for (i = 0; i < noperands; i++)
3462 goal_alternative[i] = this_alternative[i];
3463 goal_alternative_win[i] = this_alternative_win[i];
3464 goal_alternative_offmemok[i] = this_alternative_offmemok[i];
3465 goal_alternative_matches[i] = this_alternative_matches[i];
3466 goal_alternative_earlyclobber[i]
3467 = this_alternative_earlyclobber[i];
3469 goal_alternative_swapped = swapped;
3471 goal_alternative_number = this_alternative_number;
3472 goal_earlyclobber = this_earlyclobber;
3476 /* If insn is commutative (it's safe to exchange a certain pair of operands)
3477 then we need to try each alternative twice,
3478 the second time matching those two operands
3479 as if we had exchanged them.
3480 To do this, really exchange them in operands.
3482 If we have just tried the alternatives the second time,
3483 return operands to normal and drop through. */
3485 if (commutative >= 0)
3490 register enum reg_class tclass;
3493 recog_operand[commutative] = substed_operand[commutative + 1];
3494 recog_operand[commutative + 1] = substed_operand[commutative];
3496 tclass = preferred_class[commutative];
3497 preferred_class[commutative] = preferred_class[commutative + 1];
3498 preferred_class[commutative + 1] = tclass;
3500 t = pref_or_nothing[commutative];
3501 pref_or_nothing[commutative] = pref_or_nothing[commutative + 1];
3502 pref_or_nothing[commutative + 1] = t;
3504 bcopy ((char *) constraints1, (char *) constraints,
3505 noperands * sizeof (char *));
3510 recog_operand[commutative] = substed_operand[commutative];
3511 recog_operand[commutative + 1] = substed_operand[commutative + 1];
3515 /* The operands don't meet the constraints.
3516 goal_alternative describes the alternative
3517 that we could reach by reloading the fewest operands.
3518 Reload so as to fit it. */
3520 if (best == MAX_RECOG_OPERANDS * 2 + 600)
3522 /* No alternative works with reloads?? */
3523 if (insn_code_number >= 0)
3525 error_for_asm (insn, "inconsistent operand constraints in an `asm'");
3526 /* Avoid further trouble with this insn. */
3527 PATTERN (insn) = gen_rtx_USE (VOIDmode, const0_rtx);
3532 /* Jump to `finish' from above if all operands are valid already.
3533 In that case, goal_alternative_win is all 1. */
3536 /* Right now, for any pair of operands I and J that are required to match,
3538 goal_alternative_matches[J] is I.
3539 Set up goal_alternative_matched as the inverse function:
3540 goal_alternative_matched[I] = J. */
3542 for (i = 0; i < noperands; i++)
3543 goal_alternative_matched[i] = -1;
3545 for (i = 0; i < noperands; i++)
3546 if (! goal_alternative_win[i]
3547 && goal_alternative_matches[i] >= 0)
3548 goal_alternative_matched[goal_alternative_matches[i]] = i;
3550 /* If the best alternative is with operands 1 and 2 swapped,
3551 consider them swapped before reporting the reloads. Update the
3552 operand numbers of any reloads already pushed. */
3554 if (goal_alternative_swapped)
3558 tem = substed_operand[commutative];
3559 substed_operand[commutative] = substed_operand[commutative + 1];
3560 substed_operand[commutative + 1] = tem;
3561 tem = recog_operand[commutative];
3562 recog_operand[commutative] = recog_operand[commutative + 1];
3563 recog_operand[commutative + 1] = tem;
3565 for (i = 0; i < n_reloads; i++)
3567 if (reload_opnum[i] == commutative)
3568 reload_opnum[i] = commutative + 1;
3569 else if (reload_opnum[i] == commutative + 1)
3570 reload_opnum[i] = commutative;
3574 /* Perform whatever substitutions on the operands we are supposed
3575 to make due to commutativity or replacement of registers
3576 with equivalent constants or memory slots. */
3578 for (i = 0; i < noperands; i++)
3580 *recog_operand_loc[i] = substed_operand[i];
3581 /* While we are looping on operands, initialize this. */
3582 operand_reloadnum[i] = -1;
3584 /* If this is an earlyclobber operand, we need to widen the scope.
3585 The reload must remain valid from the start of the insn being
3586 reloaded until after the operand is stored into its destination.
3587 We approximate this with RELOAD_OTHER even though we know that we
3588 do not conflict with RELOAD_FOR_INPUT_ADDRESS reloads.
3590 One special case that is worth checking is when we have an
3591 output that is earlyclobber but isn't used past the insn (typically
3592 a SCRATCH). In this case, we only need have the reload live
3593 through the insn itself, but not for any of our input or output
3595 But we must not accidentally narrow the scope of an existing
3596 RELOAD_OTHER reload - leave these alone.
3598 In any case, anything needed to address this operand can remain
3599 however they were previously categorized. */
3601 if (goal_alternative_earlyclobber[i] && operand_type[i] != RELOAD_OTHER)
3603 = (find_reg_note (insn, REG_UNUSED, recog_operand[i])
3604 ? RELOAD_FOR_INSN : RELOAD_OTHER);
3607 /* Any constants that aren't allowed and can't be reloaded
3608 into registers are here changed into memory references. */
3609 for (i = 0; i < noperands; i++)
3610 if (! goal_alternative_win[i]
3611 && CONSTANT_P (recog_operand[i])
3612 /* force_const_mem does not accept HIGH. */
3613 && GET_CODE (recog_operand[i]) != HIGH
3614 && ((PREFERRED_RELOAD_CLASS (recog_operand[i],
3615 (enum reg_class) goal_alternative[i])
3617 || no_input_reloads)
3618 && operand_mode[i] != VOIDmode)
3620 *recog_operand_loc[i] = recog_operand[i]
3621 = find_reloads_toplev (force_const_mem (operand_mode[i],
3623 i, address_type[i], ind_levels, 0);
3624 if (alternative_allows_memconst (constraints1[i],
3625 goal_alternative_number))
3626 goal_alternative_win[i] = 1;
3629 /* Record the values of the earlyclobber operands for the caller. */
3630 if (goal_earlyclobber)
3631 for (i = 0; i < noperands; i++)
3632 if (goal_alternative_earlyclobber[i])
3633 reload_earlyclobbers[n_earlyclobbers++] = recog_operand[i];
3635 /* Now record reloads for all the operands that need them. */
3636 last_output_reload_regno = -1;
3637 for (i = 0; i < noperands; i++)
3638 if (! goal_alternative_win[i])
3640 /* Operands that match previous ones have already been handled. */
3641 if (goal_alternative_matches[i] >= 0)
3643 /* Handle an operand with a nonoffsettable address
3644 appearing where an offsettable address will do
3645 by reloading the address into a base register.
3647 ??? We can also do this when the operand is a register and
3648 reg_equiv_mem is not offsettable, but this is a bit tricky,
3649 so we don't bother with it. It may not be worth doing. */
3650 else if (goal_alternative_matched[i] == -1
3651 && goal_alternative_offmemok[i]
3652 && GET_CODE (recog_operand[i]) == MEM)
3654 operand_reloadnum[i]
3655 = push_reload (XEXP (recog_operand[i], 0), NULL_RTX,
3656 &XEXP (recog_operand[i], 0), NULL_PTR,
3657 BASE_REG_CLASS, GET_MODE (XEXP (recog_operand[i], 0)),
3658 VOIDmode, 0, 0, i, RELOAD_FOR_INPUT);
3659 reload_inc[operand_reloadnum[i]]
3660 = GET_MODE_SIZE (GET_MODE (recog_operand[i]));
3662 /* If this operand is an output, we will have made any
3663 reloads for its address as RELOAD_FOR_OUTPUT_ADDRESS, but
3664 now we are treating part of the operand as an input, so
3665 we must change these to RELOAD_FOR_INPUT_ADDRESS. */
3667 if (modified[i] == RELOAD_WRITE)
3669 for (j = 0; j < n_reloads; j++)
3671 if (reload_opnum[j] == i)
3673 if (reload_when_needed[j] == RELOAD_FOR_OUTPUT_ADDRESS)
3674 reload_when_needed[j] = RELOAD_FOR_INPUT_ADDRESS;
3675 else if (reload_when_needed[j]
3676 == RELOAD_FOR_OUTADDR_ADDRESS)
3677 reload_when_needed[j] = RELOAD_FOR_INPADDR_ADDRESS;
3682 else if (goal_alternative_matched[i] == -1)
3684 operand_reloadnum[i]
3685 = push_reload ((modified[i] != RELOAD_WRITE
3686 ? recog_operand[i] : 0),
3687 modified[i] != RELOAD_READ ? recog_operand[i] : 0,
3688 (modified[i] != RELOAD_WRITE
3689 ? recog_operand_loc[i] : 0),
3690 (modified[i] != RELOAD_READ
3691 ? recog_operand_loc[i] : 0),
3692 (enum reg_class) goal_alternative[i],
3693 (modified[i] == RELOAD_WRITE
3694 ? VOIDmode : operand_mode[i]),
3695 (modified[i] == RELOAD_READ
3696 ? VOIDmode : operand_mode[i]),
3697 (insn_code_number < 0 ? 0
3698 : insn_operand_strict_low[insn_code_number][i]),
3699 0, i, operand_type[i]);
3700 if (modified[i] != RELOAD_READ
3701 && GET_CODE (recog_operand[i]) == REG)
3702 last_output_reload_regno = REGNO (recog_operand[i]);
3704 /* In a matching pair of operands, one must be input only
3705 and the other must be output only.
3706 Pass the input operand as IN and the other as OUT. */
3707 else if (modified[i] == RELOAD_READ
3708 && modified[goal_alternative_matched[i]] == RELOAD_WRITE)
3710 operand_reloadnum[i]
3711 = push_reload (recog_operand[i],
3712 recog_operand[goal_alternative_matched[i]],
3713 recog_operand_loc[i],
3714 recog_operand_loc[goal_alternative_matched[i]],
3715 (enum reg_class) goal_alternative[i],
3717 operand_mode[goal_alternative_matched[i]],
3718 0, 0, i, RELOAD_OTHER);
3719 operand_reloadnum[goal_alternative_matched[i]] = output_reloadnum;
3720 if (GET_CODE (recog_operand[goal_alternative_matched[i]]) == REG)
3721 last_output_reload_regno
3722 = REGNO (recog_operand[goal_alternative_matched[i]]);
3724 else if (modified[i] == RELOAD_WRITE
3725 && modified[goal_alternative_matched[i]] == RELOAD_READ)
3727 operand_reloadnum[goal_alternative_matched[i]]
3728 = push_reload (recog_operand[goal_alternative_matched[i]],
3730 recog_operand_loc[goal_alternative_matched[i]],
3731 recog_operand_loc[i],
3732 (enum reg_class) goal_alternative[i],
3733 operand_mode[goal_alternative_matched[i]],
3735 0, 0, i, RELOAD_OTHER);
3736 operand_reloadnum[i] = output_reloadnum;
3737 if (GET_CODE (recog_operand[i]) == REG)
3738 last_output_reload_regno = REGNO (recog_operand[i]);
3740 else if (insn_code_number >= 0)
3744 error_for_asm (insn, "inconsistent operand constraints in an `asm'");
3745 /* Avoid further trouble with this insn. */
3746 PATTERN (insn) = gen_rtx_USE (VOIDmode, const0_rtx);
3751 else if (goal_alternative_matched[i] < 0
3752 && goal_alternative_matches[i] < 0
3755 /* For each non-matching operand that's a MEM or a pseudo-register
3756 that didn't get a hard register, make an optional reload.
3757 This may get done even if the insn needs no reloads otherwise. */
3759 rtx operand = recog_operand[i];
3761 while (GET_CODE (operand) == SUBREG)
3762 operand = XEXP (operand, 0);
3763 if ((GET_CODE (operand) == MEM
3764 || (GET_CODE (operand) == REG
3765 && REGNO (operand) >= FIRST_PSEUDO_REGISTER))
3766 && (enum reg_class) goal_alternative[i] != NO_REGS
3767 && ! no_input_reloads
3768 /* Optional output reloads don't do anything and we mustn't
3769 make in-out reloads on insns that are not permitted output
3771 && (modified[i] == RELOAD_READ
3772 || (modified[i] == RELOAD_READ_WRITE && ! no_output_reloads)))
3773 operand_reloadnum[i]
3774 = push_reload (modified[i] != RELOAD_WRITE ? recog_operand[i] : 0,
3775 modified[i] != RELOAD_READ ? recog_operand[i] : 0,
3776 (modified[i] != RELOAD_WRITE
3777 ? recog_operand_loc[i] : 0),
3778 (modified[i] != RELOAD_READ
3779 ? recog_operand_loc[i] : 0),
3780 (enum reg_class) goal_alternative[i],
3781 (modified[i] == RELOAD_WRITE
3782 ? VOIDmode : operand_mode[i]),
3783 (modified[i] == RELOAD_READ
3784 ? VOIDmode : operand_mode[i]),
3785 (insn_code_number < 0 ? 0
3786 : insn_operand_strict_low[insn_code_number][i]),
3787 1, i, operand_type[i]);
3789 else if (goal_alternative_matches[i] >= 0
3790 && goal_alternative_win[goal_alternative_matches[i]]
3791 && modified[i] == RELOAD_READ
3792 && modified[goal_alternative_matches[i]] == RELOAD_WRITE
3793 && ! no_input_reloads && ! no_output_reloads
3796 /* Similarly, make an optional reload for a pair of matching
3797 objects that are in MEM or a pseudo that didn't get a hard reg. */
3799 rtx operand = recog_operand[i];
3801 while (GET_CODE (operand) == SUBREG)
3802 operand = XEXP (operand, 0);
3803 if ((GET_CODE (operand) == MEM
3804 || (GET_CODE (operand) == REG
3805 && REGNO (operand) >= FIRST_PSEUDO_REGISTER))
3806 && ((enum reg_class) goal_alternative[goal_alternative_matches[i]]
3808 operand_reloadnum[i] = operand_reloadnum[goal_alternative_matches[i]]
3809 = push_reload (recog_operand[goal_alternative_matches[i]],
3811 recog_operand_loc[goal_alternative_matches[i]],
3812 recog_operand_loc[i],
3813 (enum reg_class) goal_alternative[goal_alternative_matches[i]],
3814 operand_mode[goal_alternative_matches[i]],
3816 0, 1, goal_alternative_matches[i], RELOAD_OTHER);
3819 /* If this insn pattern contains any MATCH_DUP's, make sure that
3820 they will be substituted if the operands they match are substituted.
3821 Also do now any substitutions we already did on the operands.
3823 Don't do this if we aren't making replacements because we might be
3824 propagating things allocated by frame pointer elimination into places
3825 it doesn't expect. */
3827 if (insn_code_number >= 0 && replace)
3828 for (i = insn_n_dups[insn_code_number] - 1; i >= 0; i--)
3830 int opno = recog_dup_num[i];
3831 *recog_dup_loc[i] = *recog_operand_loc[opno];
3832 if (operand_reloadnum[opno] >= 0)
3833 push_replacement (recog_dup_loc[i], operand_reloadnum[opno],
3834 insn_operand_mode[insn_code_number][opno]);
3838 /* This loses because reloading of prior insns can invalidate the equivalence
3839 (or at least find_equiv_reg isn't smart enough to find it any more),
3840 causing this insn to need more reload regs than it needed before.
3841 It may be too late to make the reload regs available.
3842 Now this optimization is done safely in choose_reload_regs. */
3844 /* For each reload of a reg into some other class of reg,
3845 search for an existing equivalent reg (same value now) in the right class.
3846 We can use it as long as we don't need to change its contents. */
3847 for (i = 0; i < n_reloads; i++)
3848 if (reload_reg_rtx[i] == 0
3849 && reload_in[i] != 0
3850 && GET_CODE (reload_in[i]) == REG
3851 && reload_out[i] == 0)
3854 = find_equiv_reg (reload_in[i], insn, reload_reg_class[i], -1,
3855 static_reload_reg_p, 0, reload_inmode[i]);
3856 /* Prevent generation of insn to load the value
3857 because the one we found already has the value. */
3858 if (reload_reg_rtx[i])
3859 reload_in[i] = reload_reg_rtx[i];
3863 /* Perhaps an output reload can be combined with another
3864 to reduce needs by one. */
3865 if (!goal_earlyclobber)
3868 /* If we have a pair of reloads for parts of an address, they are reloading
3869 the same object, the operands themselves were not reloaded, and they
3870 are for two operands that are supposed to match, merge the reloads and
3871 change the type of the surviving reload to RELOAD_FOR_OPERAND_ADDRESS. */
3873 for (i = 0; i < n_reloads; i++)
3877 for (j = i + 1; j < n_reloads; j++)
3878 if ((reload_when_needed[i] == RELOAD_FOR_INPUT_ADDRESS
3879 || reload_when_needed[i] == RELOAD_FOR_OUTPUT_ADDRESS
3880 || reload_when_needed[i] == RELOAD_FOR_INPADDR_ADDRESS
3881 || reload_when_needed[i] == RELOAD_FOR_OUTADDR_ADDRESS)
3882 && (reload_when_needed[j] == RELOAD_FOR_INPUT_ADDRESS
3883 || reload_when_needed[j] == RELOAD_FOR_OUTPUT_ADDRESS
3884 || reload_when_needed[j] == RELOAD_FOR_INPADDR_ADDRESS
3885 || reload_when_needed[j] == RELOAD_FOR_OUTADDR_ADDRESS)
3886 && rtx_equal_p (reload_in[i], reload_in[j])
3887 && (operand_reloadnum[reload_opnum[i]] < 0
3888 || reload_optional[operand_reloadnum[reload_opnum[i]]])
3889 && (operand_reloadnum[reload_opnum[j]] < 0
3890 || reload_optional[operand_reloadnum[reload_opnum[j]]])
3891 && (goal_alternative_matches[reload_opnum[i]] == reload_opnum[j]
3892 || (goal_alternative_matches[reload_opnum[j]]
3893 == reload_opnum[i])))
3895 for (k = 0; k < n_replacements; k++)
3896 if (replacements[k].what == j)
3897 replacements[k].what = i;
3899 if (reload_when_needed[i] == RELOAD_FOR_INPADDR_ADDRESS
3900 || reload_when_needed[i] == RELOAD_FOR_OUTADDR_ADDRESS)
3901 reload_when_needed[i] = RELOAD_FOR_OPADDR_ADDR;
3903 reload_when_needed[i] = RELOAD_FOR_OPERAND_ADDRESS;
3908 /* Scan all the reloads and update their type.
3909 If a reload is for the address of an operand and we didn't reload
3910 that operand, change the type. Similarly, change the operand number
3911 of a reload when two operands match. If a reload is optional, treat it
3912 as though the operand isn't reloaded.
3914 ??? This latter case is somewhat odd because if we do the optional
3915 reload, it means the object is hanging around. Thus we need only
3916 do the address reload if the optional reload was NOT done.
3918 Change secondary reloads to be the address type of their operand, not
3921 If an operand's reload is now RELOAD_OTHER, change any
3922 RELOAD_FOR_INPUT_ADDRESS reloads of that operand to
3923 RELOAD_FOR_OTHER_ADDRESS. */
3925 for (i = 0; i < n_reloads; i++)
3927 if (reload_secondary_p[i]
3928 && reload_when_needed[i] == operand_type[reload_opnum[i]])
3929 reload_when_needed[i] = address_type[reload_opnum[i]];
3931 if ((reload_when_needed[i] == RELOAD_FOR_INPUT_ADDRESS
3932 || reload_when_needed[i] == RELOAD_FOR_OUTPUT_ADDRESS
3933 || reload_when_needed[i] == RELOAD_FOR_INPADDR_ADDRESS
3934 || reload_when_needed[i] == RELOAD_FOR_OUTADDR_ADDRESS)
3935 && (operand_reloadnum[reload_opnum[i]] < 0
3936 || reload_optional[operand_reloadnum[reload_opnum[i]]]))
3938 /* If we have a secondary reload to go along with this reload,
3939 change its type to RELOAD_FOR_OPADDR_ADDR. */
3941 if ((reload_when_needed[i] == RELOAD_FOR_INPUT_ADDRESS
3942 || reload_when_needed[i] == RELOAD_FOR_INPADDR_ADDRESS)
3943 && reload_secondary_in_reload[i] != -1)
3945 int secondary_in_reload = reload_secondary_in_reload[i];
3947 reload_when_needed[secondary_in_reload]
3948 = RELOAD_FOR_OPADDR_ADDR;
3950 /* If there's a tertiary reload we have to change it also. */
3951 if (secondary_in_reload > 0
3952 && reload_secondary_in_reload[secondary_in_reload] != -1)
3953 reload_when_needed[reload_secondary_in_reload[secondary_in_reload]]
3954 = RELOAD_FOR_OPADDR_ADDR;
3957 if ((reload_when_needed[i] == RELOAD_FOR_OUTPUT_ADDRESS
3958 || reload_when_needed[i] == RELOAD_FOR_OUTADDR_ADDRESS)
3959 && reload_secondary_out_reload[i] != -1)
3961 int secondary_out_reload = reload_secondary_out_reload[i];
3963 reload_when_needed[secondary_out_reload]
3964 = RELOAD_FOR_OPADDR_ADDR;
3966 /* If there's a tertiary reload we have to change it also. */
3967 if (secondary_out_reload
3968 && reload_secondary_out_reload[secondary_out_reload] != -1)
3969 reload_when_needed[reload_secondary_out_reload[secondary_out_reload]]
3970 = RELOAD_FOR_OPADDR_ADDR;
3973 reload_when_needed[i] = RELOAD_FOR_OPERAND_ADDRESS;
3976 if ((reload_when_needed[i] == RELOAD_FOR_INPUT_ADDRESS
3977 || reload_when_needed[i] == RELOAD_FOR_INPADDR_ADDRESS)
3978 && operand_reloadnum[reload_opnum[i]] >= 0
3979 && (reload_when_needed[operand_reloadnum[reload_opnum[i]]]
3981 reload_when_needed[i] = RELOAD_FOR_OTHER_ADDRESS;
3983 if (goal_alternative_matches[reload_opnum[i]] >= 0)
3984 reload_opnum[i] = goal_alternative_matches[reload_opnum[i]];
3987 /* Scan all the reloads, and check for RELOAD_FOR_OPERAND_ADDRESS reloads.
3988 If we have more than one, then convert all RELOAD_FOR_OPADDR_ADDR
3989 reloads to RELOAD_FOR_OPERAND_ADDRESS reloads.
3991 choose_reload_regs assumes that RELOAD_FOR_OPADDR_ADDR reloads never
3992 conflict with RELOAD_FOR_OPERAND_ADDRESS reloads. This is true for a
3993 single pair of RELOAD_FOR_OPADDR_ADDR/RELOAD_FOR_OPERAND_ADDRESS reloads.
3994 However, if there is more than one RELOAD_FOR_OPERAND_ADDRESS reload,
3995 then a RELOAD_FOR_OPADDR_ADDR reload conflicts with all
3996 RELOAD_FOR_OPERAND_ADDRESS reloads other than the one that uses it.
3997 This is complicated by the fact that a single operand can have more
3998 than one RELOAD_FOR_OPERAND_ADDRESS reload. It is very difficult to fix
3999 choose_reload_regs without affecting code quality, and cases that
4000 actually fail are extremely rare, so it turns out to be better to fix
4001 the problem here by not generating cases that choose_reload_regs will
4003 /* There is a similar problem with RELAOD_FOR_INPUT_ADDRESS /
4004 RELOAD_FOR_OUTPUT_ADDRESS when there is more than one of a kind for
4006 We can reduce the register pressure by exploiting that a
4007 RELOAD_FOR_X_ADDR_ADDR that precedes all RELOAD_FOR_X_ADDRESS reloads
4008 does not conflict with any of them. */
4010 int first_op_addr_num = -2;
4011 int first_inpaddr_num[MAX_RECOG_OPERANDS];
4012 int first_outpaddr_num[MAX_RECOG_OPERANDS];
4014 /* We use last_op_addr_reload and the contents of the above arrays
4015 first as flags - -2 means no instance encountered, -1 means exactly
4016 one instance encountered.
4017 If more than one instance has been encountered, we store the reload
4018 number of the first reload of the kind in question; reload numbers
4019 are known to be non-negative. */
4020 for (i = 0; i < noperands; i++)
4021 first_inpaddr_num[i] = first_outpaddr_num[i] = -2;
4022 for (i = n_reloads - 1; i >= 0; i--)
4024 switch (reload_when_needed[i])
4026 case RELOAD_FOR_OPERAND_ADDRESS:
4027 if (! ++first_op_addr_num)
4029 first_op_addr_num= i;
4033 case RELOAD_FOR_INPUT_ADDRESS:
4034 if (! ++first_inpaddr_num[reload_opnum[i]])
4036 first_inpaddr_num[reload_opnum[i]] = i;
4040 case RELOAD_FOR_OUTPUT_ADDRESS:
4041 if (! ++first_outpaddr_num[reload_opnum[i]])
4043 first_outpaddr_num[reload_opnum[i]] = i;
4054 for (i = 0; i < n_reloads; i++)
4056 int first_num, type;
4058 switch (reload_when_needed[i])
4060 case RELOAD_FOR_OPADDR_ADDR:
4061 first_num = first_op_addr_num;
4062 type = RELOAD_FOR_OPERAND_ADDRESS;
4064 case RELOAD_FOR_INPADDR_ADDRESS:
4065 first_num = first_inpaddr_num[reload_opnum[i]];
4066 type = RELOAD_FOR_INPUT_ADDRESS;
4068 case RELOAD_FOR_OUTADDR_ADDRESS:
4069 first_num = first_outpaddr_num[reload_opnum[i]];
4070 type = RELOAD_FOR_OUTPUT_ADDRESS;
4076 reload_when_needed[i] = type;
4081 /* See if we have any reloads that are now allowed to be merged
4082 because we've changed when the reload is needed to
4083 RELOAD_FOR_OPERAND_ADDRESS or RELOAD_FOR_OTHER_ADDRESS. Only
4084 check for the most common cases. */
4086 for (i = 0; i < n_reloads; i++)
4087 if (reload_in[i] != 0 && reload_out[i] == 0
4088 && (reload_when_needed[i] == RELOAD_FOR_OPERAND_ADDRESS
4089 || reload_when_needed[i] == RELOAD_FOR_OPADDR_ADDR
4090 || reload_when_needed[i] == RELOAD_FOR_OTHER_ADDRESS))
4091 for (j = 0; j < n_reloads; j++)
4092 if (i != j && reload_in[j] != 0 && reload_out[j] == 0
4093 && reload_when_needed[j] == reload_when_needed[i]
4094 && MATCHES (reload_in[i], reload_in[j])
4095 && reload_reg_class[i] == reload_reg_class[j]
4096 && !reload_nocombine[i] && !reload_nocombine[j]
4097 && reload_reg_rtx[i] == reload_reg_rtx[j])
4099 reload_opnum[i] = MIN (reload_opnum[i], reload_opnum[j]);
4100 transfer_replacements (i, j);
4104 /* Set which reloads must use registers not used in any group. Start
4105 with those that conflict with a group and then include ones that
4106 conflict with ones that are already known to conflict with a group. */
4109 for (i = 0; i < n_reloads; i++)
4111 enum machine_mode mode = reload_inmode[i];
4112 enum reg_class class = reload_reg_class[i];
4115 if (GET_MODE_SIZE (reload_outmode[i]) > GET_MODE_SIZE (mode))
4116 mode = reload_outmode[i];
4117 size = CLASS_MAX_NREGS (class, mode);
4120 for (j = 0; j < n_reloads; j++)
4121 if ((CLASS_MAX_NREGS (reload_reg_class[j],
4122 (GET_MODE_SIZE (reload_outmode[j])
4123 > GET_MODE_SIZE (reload_inmode[j]))
4124 ? reload_outmode[j] : reload_inmode[j])
4126 && !reload_optional[j]
4127 && (reload_in[j] != 0 || reload_out[j] != 0
4128 || reload_secondary_p[j])
4129 && reloads_conflict (i, j)
4130 && reg_classes_intersect_p (class, reload_reg_class[j]))
4132 reload_nongroup[i] = 1;
4142 for (i = 0; i < n_reloads; i++)
4144 enum machine_mode mode = reload_inmode[i];
4145 enum reg_class class = reload_reg_class[i];
4148 if (GET_MODE_SIZE (reload_outmode[i]) > GET_MODE_SIZE (mode))
4149 mode = reload_outmode[i];
4150 size = CLASS_MAX_NREGS (class, mode);
4152 if (! reload_nongroup[i] && size == 1)
4153 for (j = 0; j < n_reloads; j++)
4154 if (reload_nongroup[j]
4155 && reloads_conflict (i, j)
4156 && reg_classes_intersect_p (class, reload_reg_class[j]))
4158 reload_nongroup[i] = 1;
4165 #else /* no REGISTER_CONSTRAINTS */
4167 int insn_code_number;
4168 int goal_earlyclobber = 0; /* Always 0, to make combine_reloads happen. */
4170 rtx body = PATTERN (insn);
4174 n_earlyclobbers = 0;
4175 replace_reloads = replace;
4178 /* Find what kind of insn this is. NOPERANDS gets number of operands.
4179 Store the operand values in RECOG_OPERAND and the locations
4180 of the words in the insn that point to them in RECOG_OPERAND_LOC.
4181 Return if the insn needs no reload processing. */
4183 switch (GET_CODE (body))
4194 noperands = asm_noperands (body);
4197 /* This insn is an `asm' with operands.
4198 First, find out how many operands, and allocate space. */
4200 insn_code_number = -1;
4201 /* ??? This is a bug! ???
4202 Give up and delete this insn if it has too many operands. */
4203 if (noperands > MAX_RECOG_OPERANDS)
4206 /* Now get the operand values out of the insn. */
4208 decode_asm_operands (body, recog_operand, recog_operand_loc,
4209 NULL_PTR, NULL_PTR);
4214 /* Ordinary insn: recognize it, allocate space for operands and
4215 constraints, and get them out via insn_extract. */
4217 insn_code_number = recog_memoized (insn);
4218 noperands = insn_n_operands[insn_code_number];
4219 insn_extract (insn);
4225 for (i = 0; i < noperands; i++)
4227 register RTX_CODE code = GET_CODE (recog_operand[i]);
4228 int is_set_dest = GET_CODE (body) == SET && (i == 0);
4230 if (insn_code_number >= 0)
4231 if (insn_operand_address_p[insn_code_number][i])
4232 find_reloads_address (VOIDmode, NULL_PTR,
4233 recog_operand[i], recog_operand_loc[i],
4234 i, RELOAD_FOR_INPUT, ind_levels, insn);
4236 /* In these cases, we can't tell if the operand is an input
4237 or an output, so be conservative. In practice it won't be
4241 find_reloads_address (GET_MODE (recog_operand[i]),
4242 recog_operand_loc[i],
4243 XEXP (recog_operand[i], 0),
4244 &XEXP (recog_operand[i], 0),
4245 i, RELOAD_OTHER, ind_levels, insn);
4247 recog_operand[i] = *recog_operand_loc[i]
4248 = find_reloads_toplev (recog_operand[i], i, RELOAD_OTHER,
4249 ind_levels, is_set_dest);
4252 register int regno = REGNO (recog_operand[i]);
4253 if (reg_equiv_constant[regno] != 0 && !is_set_dest)
4254 recog_operand[i] = *recog_operand_loc[i]
4255 = reg_equiv_constant[regno];
4256 #if 0 /* This might screw code in reload1.c to delete prior output-reload
4257 that feeds this insn. */
4258 if (reg_equiv_mem[regno] != 0)
4259 recog_operand[i] = *recog_operand_loc[i]
4260 = reg_equiv_mem[regno];
4265 /* Perhaps an output reload can be combined with another
4266 to reduce needs by one. */
4267 if (!goal_earlyclobber)
4269 #endif /* no REGISTER_CONSTRAINTS */
4272 /* Return 1 if alternative number ALTNUM in constraint-string CONSTRAINT
4273 accepts a memory operand with constant address. */
4276 alternative_allows_memconst (constraint, altnum)
4281 /* Skip alternatives before the one requested. */
4284 while (*constraint++ != ',');
4287 /* Scan the requested alternative for 'm' or 'o'.
4288 If one of them is present, this alternative accepts memory constants. */
4289 while ((c = *constraint++) && c != ',' && c != '#')
4290 if (c == 'm' || c == 'o')
4295 /* Scan X for memory references and scan the addresses for reloading.
4296 Also checks for references to "constant" regs that we want to eliminate
4297 and replaces them with the values they stand for.
4298 We may alter X destructively if it contains a reference to such.
4299 If X is just a constant reg, we return the equivalent value
4302 IND_LEVELS says how many levels of indirect addressing this machine
4305 OPNUM and TYPE identify the purpose of the reload.
4307 IS_SET_DEST is true if X is the destination of a SET, which is not
4308 appropriate to be replaced by a constant. */
4311 find_reloads_toplev (x, opnum, type, ind_levels, is_set_dest)
4314 enum reload_type type;
4318 register RTX_CODE code = GET_CODE (x);
4320 register char *fmt = GET_RTX_FORMAT (code);
4325 /* This code is duplicated for speed in find_reloads. */
4326 register int regno = REGNO (x);
4327 if (reg_equiv_constant[regno] != 0 && !is_set_dest)
4328 x = reg_equiv_constant[regno];
4330 /* This creates (subreg (mem...)) which would cause an unnecessary
4331 reload of the mem. */
4332 else if (reg_equiv_mem[regno] != 0)
4333 x = reg_equiv_mem[regno];
4335 else if (reg_equiv_address[regno] != 0)
4337 /* If reg_equiv_address varies, it may be shared, so copy it. */
4338 /* We must rerun eliminate_regs, in case the elimination
4339 offsets have changed. */
4340 rtx addr = XEXP (eliminate_regs (reg_equiv_memory_loc[regno], 0,
4344 if (rtx_varies_p (addr))
4345 addr = copy_rtx (addr);
4347 x = gen_rtx_MEM (GET_MODE (x), addr);
4348 RTX_UNCHANGING_P (x) = RTX_UNCHANGING_P (regno_reg_rtx[regno]);
4349 find_reloads_address (GET_MODE (x), NULL_PTR,
4351 &XEXP (x, 0), opnum, type, ind_levels, 0);
4358 find_reloads_address (GET_MODE (x), &tem, XEXP (x, 0), &XEXP (x, 0),
4359 opnum, type, ind_levels, 0);
4363 if (code == SUBREG && GET_CODE (SUBREG_REG (x)) == REG)
4365 /* Check for SUBREG containing a REG that's equivalent to a constant.
4366 If the constant has a known value, truncate it right now.
4367 Similarly if we are extracting a single-word of a multi-word
4368 constant. If the constant is symbolic, allow it to be substituted
4369 normally. push_reload will strip the subreg later. If the
4370 constant is VOIDmode, abort because we will lose the mode of
4371 the register (this should never happen because one of the cases
4372 above should handle it). */
4374 register int regno = REGNO (SUBREG_REG (x));
4377 if (subreg_lowpart_p (x)
4378 && regno >= FIRST_PSEUDO_REGISTER && reg_renumber[regno] < 0
4379 && reg_equiv_constant[regno] != 0
4380 && (tem = gen_lowpart_common (GET_MODE (x),
4381 reg_equiv_constant[regno])) != 0)
4384 if (GET_MODE_BITSIZE (GET_MODE (x)) == BITS_PER_WORD
4385 && regno >= FIRST_PSEUDO_REGISTER && reg_renumber[regno] < 0
4386 && reg_equiv_constant[regno] != 0
4387 && (tem = operand_subword (reg_equiv_constant[regno],
4389 GET_MODE (SUBREG_REG (x)))) != 0)
4391 /* TEM is now a word sized constant for the bits from X that
4392 we wanted. However, TEM may be the wrong representation.
4394 Use gen_lowpart_common to convert a CONST_INT into a
4395 CONST_DOUBLE and vice versa as needed according to by the mode
4397 tem = gen_lowpart_common (GET_MODE (x), tem);
4403 /* If the SUBREG is wider than a word, the above test will fail.
4404 For example, we might have a SImode SUBREG of a DImode SUBREG_REG
4405 for a 16 bit target, or a DImode SUBREG of a TImode SUBREG_REG for
4406 a 32 bit target. We still can - and have to - handle this
4407 for non-paradoxical subregs of CONST_INTs. */
4408 if (regno >= FIRST_PSEUDO_REGISTER && reg_renumber[regno] < 0
4409 && reg_equiv_constant[regno] != 0
4410 && GET_CODE (reg_equiv_constant[regno]) == CONST_INT
4411 && (GET_MODE_SIZE (GET_MODE (x))
4412 < GET_MODE_SIZE (GET_MODE (SUBREG_REG (x)))))
4414 int shift = SUBREG_WORD (x) * BITS_PER_WORD;
4415 if (WORDS_BIG_ENDIAN)
4416 shift = (GET_MODE_BITSIZE (GET_MODE (SUBREG_REG (x)))
4417 - GET_MODE_BITSIZE (GET_MODE (x))
4419 /* Here we use the knowledge that CONST_INTs have a
4420 HOST_WIDE_INT field. */
4421 if (shift >= HOST_BITS_PER_WIDE_INT)
4422 shift = HOST_BITS_PER_WIDE_INT - 1;
4423 return GEN_INT (INTVAL (reg_equiv_constant[regno]) >> shift);
4426 if (regno >= FIRST_PSEUDO_REGISTER && reg_renumber[regno] < 0
4427 && reg_equiv_constant[regno] != 0
4428 && GET_MODE (reg_equiv_constant[regno]) == VOIDmode)
4431 /* If the subreg contains a reg that will be converted to a mem,
4432 convert the subreg to a narrower memref now.
4433 Otherwise, we would get (subreg (mem ...) ...),
4434 which would force reload of the mem.
4436 We also need to do this if there is an equivalent MEM that is
4437 not offsettable. In that case, alter_subreg would produce an
4438 invalid address on big-endian machines.
4440 For machines that extend byte loads, we must not reload using
4441 a wider mode if we have a paradoxical SUBREG. find_reloads will
4442 force a reload in that case. So we should not do anything here. */
4444 else if (regno >= FIRST_PSEUDO_REGISTER
4445 #ifdef LOAD_EXTEND_OP
4446 && (GET_MODE_SIZE (GET_MODE (x))
4447 <= GET_MODE_SIZE (GET_MODE (SUBREG_REG (x))))
4449 && (reg_equiv_address[regno] != 0
4450 || (reg_equiv_mem[regno] != 0
4451 && (! strict_memory_address_p (GET_MODE (x),
4452 XEXP (reg_equiv_mem[regno], 0))
4453 || ! offsettable_memref_p (reg_equiv_mem[regno])))))
4455 int offset = SUBREG_WORD (x) * UNITS_PER_WORD;
4456 /* We must rerun eliminate_regs, in case the elimination
4457 offsets have changed. */
4458 rtx addr = XEXP (eliminate_regs (reg_equiv_memory_loc[regno], 0,
4461 if (BYTES_BIG_ENDIAN)
4464 size = GET_MODE_SIZE (GET_MODE (SUBREG_REG (x)));
4465 offset += MIN (size, UNITS_PER_WORD);
4466 size = GET_MODE_SIZE (GET_MODE (x));
4467 offset -= MIN (size, UNITS_PER_WORD);
4469 addr = plus_constant (addr, offset);
4470 x = gen_rtx_MEM (GET_MODE (x), addr);
4471 RTX_UNCHANGING_P (x) = RTX_UNCHANGING_P (regno_reg_rtx[regno]);
4472 find_reloads_address (GET_MODE (x), NULL_PTR,
4474 &XEXP (x, 0), opnum, type, ind_levels, 0);
4479 for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
4482 XEXP (x, i) = find_reloads_toplev (XEXP (x, i), opnum, type,
4483 ind_levels, is_set_dest);
4488 /* Return a mem ref for the memory equivalent of reg REGNO.
4489 This mem ref is not shared with anything. */
4492 make_memloc (ad, regno)
4499 /* We must rerun eliminate_regs, in case the elimination
4500 offsets have changed. */
4501 rtx tem = XEXP (eliminate_regs (reg_equiv_memory_loc[regno], 0, NULL_RTX), 0);
4503 #if 0 /* We cannot safely reuse a memloc made here;
4504 if the pseudo appears twice, and its mem needs a reload,
4505 it gets two separate reloads assigned, but it only
4506 gets substituted with the second of them;
4507 then it can get used before that reload reg gets loaded up. */
4508 for (i = 0; i < n_memlocs; i++)
4509 if (rtx_equal_p (tem, XEXP (memlocs[i], 0)))
4513 /* If TEM might contain a pseudo, we must copy it to avoid
4514 modifying it when we do the substitution for the reload. */
4515 if (rtx_varies_p (tem))
4516 tem = copy_rtx (tem);
4518 tem = gen_rtx_MEM (GET_MODE (ad), tem);
4519 RTX_UNCHANGING_P (tem) = RTX_UNCHANGING_P (regno_reg_rtx[regno]);
4520 memlocs[n_memlocs++] = tem;
4524 /* Record all reloads needed for handling memory address AD
4525 which appears in *LOC in a memory reference to mode MODE
4526 which itself is found in location *MEMREFLOC.
4527 Note that we take shortcuts assuming that no multi-reg machine mode
4528 occurs as part of an address.
4530 OPNUM and TYPE specify the purpose of this reload.
4532 IND_LEVELS says how many levels of indirect addressing this machine
4535 INSN, if nonzero, is the insn in which we do the reload. It is used
4536 to determine if we may generate output reloads.
4538 Value is nonzero if this address is reloaded or replaced as a whole.
4539 This is interesting to the caller if the address is an autoincrement.
4541 Note that there is no verification that the address will be valid after
4542 this routine does its work. Instead, we rely on the fact that the address
4543 was valid when reload started. So we need only undo things that reload
4544 could have broken. These are wrong register types, pseudos not allocated
4545 to a hard register, and frame pointer elimination. */
4548 find_reloads_address (mode, memrefloc, ad, loc, opnum, type, ind_levels, insn)
4549 enum machine_mode mode;
4554 enum reload_type type;
4561 /* If the address is a register, see if it is a legitimate address and
4562 reload if not. We first handle the cases where we need not reload
4563 or where we must reload in a non-standard way. */
4565 if (GET_CODE (ad) == REG)
4569 if (reg_equiv_constant[regno] != 0
4570 && strict_memory_address_p (mode, reg_equiv_constant[regno]))
4572 *loc = ad = reg_equiv_constant[regno];
4576 else if (reg_equiv_address[regno] != 0)
4578 tem = make_memloc (ad, regno);
4579 find_reloads_address (GET_MODE (tem), NULL_PTR, XEXP (tem, 0),
4580 &XEXP (tem, 0), opnum, ADDR_TYPE (type),
4582 push_reload (tem, NULL_RTX, loc, NULL_PTR,
4583 reload_address_base_reg_class,
4584 GET_MODE (ad), VOIDmode, 0, 0,
4589 /* We can avoid a reload if the register's equivalent memory expression
4590 is valid as an indirect memory address.
4591 But not all addresses are valid in a mem used as an indirect address:
4592 only reg or reg+constant. */
4594 else if (reg_equiv_mem[regno] != 0 && ind_levels > 0
4595 && strict_memory_address_p (mode, reg_equiv_mem[regno])
4596 && (GET_CODE (XEXP (reg_equiv_mem[regno], 0)) == REG
4597 || (GET_CODE (XEXP (reg_equiv_mem[regno], 0)) == PLUS
4598 && GET_CODE (XEXP (XEXP (reg_equiv_mem[regno], 0), 0)) == REG
4599 && CONSTANT_P (XEXP (XEXP (reg_equiv_mem[regno], 0), 1)))))
4602 /* The only remaining case where we can avoid a reload is if this is a
4603 hard register that is valid as a base register and which is not the
4604 subject of a CLOBBER in this insn. */
4606 else if (regno < FIRST_PSEUDO_REGISTER
4607 && REGNO_MODE_OK_FOR_BASE_P (regno, mode)
4608 && ! regno_clobbered_p (regno, this_insn))
4611 /* If we do not have one of the cases above, we must do the reload. */
4612 push_reload (ad, NULL_RTX, loc, NULL_PTR, reload_address_base_reg_class,
4613 GET_MODE (ad), VOIDmode, 0, 0, opnum, type);
4617 if (strict_memory_address_p (mode, ad))
4619 /* The address appears valid, so reloads are not needed.
4620 But the address may contain an eliminable register.
4621 This can happen because a machine with indirect addressing
4622 may consider a pseudo register by itself a valid address even when
4623 it has failed to get a hard reg.
4624 So do a tree-walk to find and eliminate all such regs. */
4626 /* But first quickly dispose of a common case. */
4627 if (GET_CODE (ad) == PLUS
4628 && GET_CODE (XEXP (ad, 1)) == CONST_INT
4629 && GET_CODE (XEXP (ad, 0)) == REG
4630 && reg_equiv_constant[REGNO (XEXP (ad, 0))] == 0)
4633 subst_reg_equivs_changed = 0;
4634 *loc = subst_reg_equivs (ad);
4636 if (! subst_reg_equivs_changed)
4639 /* Check result for validity after substitution. */
4640 if (strict_memory_address_p (mode, ad))
4644 #ifdef LEGITIMIZE_RELOAD_ADDRESS
4649 LEGITIMIZE_RELOAD_ADDRESS (ad, GET_MODE (*memrefloc), opnum, type,
4654 *memrefloc = copy_rtx (*memrefloc);
4655 XEXP (*memrefloc, 0) = ad;
4656 move_replacements (&ad, &XEXP (*memrefloc, 0));
4662 /* The address is not valid. We have to figure out why. One possibility
4663 is that it is itself a MEM. This can happen when the frame pointer is
4664 being eliminated, a pseudo is not allocated to a hard register, and the
4665 offset between the frame and stack pointers is not its initial value.
4666 In that case the pseudo will have been replaced by a MEM referring to
4667 the stack pointer. */
4668 if (GET_CODE (ad) == MEM)
4670 /* First ensure that the address in this MEM is valid. Then, unless
4671 indirect addresses are valid, reload the MEM into a register. */
4673 find_reloads_address (GET_MODE (ad), &tem, XEXP (ad, 0), &XEXP (ad, 0),
4674 opnum, ADDR_TYPE (type),
4675 ind_levels == 0 ? 0 : ind_levels - 1, insn);
4677 /* If tem was changed, then we must create a new memory reference to
4678 hold it and store it back into memrefloc. */
4679 if (tem != ad && memrefloc)
4681 *memrefloc = copy_rtx (*memrefloc);
4682 copy_replacements (tem, XEXP (*memrefloc, 0));
4683 loc = &XEXP (*memrefloc, 0);
4686 /* Check similar cases as for indirect addresses as above except
4687 that we can allow pseudos and a MEM since they should have been
4688 taken care of above. */
4691 || (GET_CODE (XEXP (tem, 0)) == SYMBOL_REF && ! indirect_symref_ok)
4692 || GET_CODE (XEXP (tem, 0)) == MEM
4693 || ! (GET_CODE (XEXP (tem, 0)) == REG
4694 || (GET_CODE (XEXP (tem, 0)) == PLUS
4695 && GET_CODE (XEXP (XEXP (tem, 0), 0)) == REG
4696 && GET_CODE (XEXP (XEXP (tem, 0), 1)) == CONST_INT)))
4698 /* Must use TEM here, not AD, since it is the one that will
4699 have any subexpressions reloaded, if needed. */
4700 push_reload (tem, NULL_RTX, loc, NULL_PTR,
4701 reload_address_base_reg_class, GET_MODE (tem),
4710 /* If we have address of a stack slot but it's not valid because the
4711 displacement is too large, compute the sum in a register.
4712 Handle all base registers here, not just fp/ap/sp, because on some
4713 targets (namely SH) we can also get too large displacements from
4714 big-endian corrections. */
4715 else if (GET_CODE (ad) == PLUS
4716 && GET_CODE (XEXP (ad, 0)) == REG
4717 && REGNO (XEXP (ad, 0)) < FIRST_PSEUDO_REGISTER
4718 && REG_MODE_OK_FOR_BASE_P (XEXP (ad, 0), mode)
4719 && GET_CODE (XEXP (ad, 1)) == CONST_INT)
4721 /* Unshare the MEM rtx so we can safely alter it. */
4724 *memrefloc = copy_rtx (*memrefloc);
4725 loc = &XEXP (*memrefloc, 0);
4727 if (double_reg_address_ok)
4729 /* Unshare the sum as well. */
4730 *loc = ad = copy_rtx (ad);
4731 /* Reload the displacement into an index reg.
4732 We assume the frame pointer or arg pointer is a base reg. */
4733 find_reloads_address_part (XEXP (ad, 1), &XEXP (ad, 1),
4734 reload_address_index_reg_class,
4735 GET_MODE (ad), opnum, type, ind_levels);
4739 /* If the sum of two regs is not necessarily valid,
4740 reload the sum into a base reg.
4741 That will at least work. */
4742 find_reloads_address_part (ad, loc, reload_address_base_reg_class,
4743 Pmode, opnum, type, ind_levels);
4748 /* If we have an indexed stack slot, there are three possible reasons why
4749 it might be invalid: The index might need to be reloaded, the address
4750 might have been made by frame pointer elimination and hence have a
4751 constant out of range, or both reasons might apply.
4753 We can easily check for an index needing reload, but even if that is the
4754 case, we might also have an invalid constant. To avoid making the
4755 conservative assumption and requiring two reloads, we see if this address
4756 is valid when not interpreted strictly. If it is, the only problem is
4757 that the index needs a reload and find_reloads_address_1 will take care
4760 There is still a case when we might generate an extra reload,
4761 however. In certain cases eliminate_regs will return a MEM for a REG
4762 (see the code there for details). In those cases, memory_address_p
4763 applied to our address will return 0 so we will think that our offset
4764 must be too large. But it might indeed be valid and the only problem
4765 is that a MEM is present where a REG should be. This case should be
4766 very rare and there doesn't seem to be any way to avoid it.
4768 If we decide to do something here, it must be that
4769 `double_reg_address_ok' is true and that this address rtl was made by
4770 eliminate_regs. We generate a reload of the fp/sp/ap + constant and
4771 rework the sum so that the reload register will be added to the index.
4772 This is safe because we know the address isn't shared.
4774 We check for fp/ap/sp as both the first and second operand of the
4777 else if (GET_CODE (ad) == PLUS && GET_CODE (XEXP (ad, 1)) == CONST_INT
4778 && GET_CODE (XEXP (ad, 0)) == PLUS
4779 && (XEXP (XEXP (ad, 0), 0) == frame_pointer_rtx
4780 #if FRAME_POINTER_REGNUM != HARD_FRAME_POINTER_REGNUM
4781 || XEXP (XEXP (ad, 0), 0) == hard_frame_pointer_rtx
4783 #if FRAME_POINTER_REGNUM != ARG_POINTER_REGNUM
4784 || XEXP (XEXP (ad, 0), 0) == arg_pointer_rtx
4786 || XEXP (XEXP (ad, 0), 0) == stack_pointer_rtx)
4787 && ! memory_address_p (mode, ad))
4789 *loc = ad = gen_rtx_PLUS (GET_MODE (ad),
4790 plus_constant (XEXP (XEXP (ad, 0), 0),
4791 INTVAL (XEXP (ad, 1))),
4792 XEXP (XEXP (ad, 0), 1));
4793 find_reloads_address_part (XEXP (ad, 0), &XEXP (ad, 0),
4794 reload_address_base_reg_class,
4795 GET_MODE (ad), opnum, type, ind_levels);
4796 find_reloads_address_1 (mode, XEXP (ad, 1), 1, &XEXP (ad, 1), opnum,
4802 else if (GET_CODE (ad) == PLUS && GET_CODE (XEXP (ad, 1)) == CONST_INT
4803 && GET_CODE (XEXP (ad, 0)) == PLUS
4804 && (XEXP (XEXP (ad, 0), 1) == frame_pointer_rtx
4805 #if HARD_FRAME_POINTER_REGNUM != FRAME_POINTER_REGNUM
4806 || XEXP (XEXP (ad, 0), 1) == hard_frame_pointer_rtx
4808 #if FRAME_POINTER_REGNUM != ARG_POINTER_REGNUM
4809 || XEXP (XEXP (ad, 0), 1) == arg_pointer_rtx
4811 || XEXP (XEXP (ad, 0), 1) == stack_pointer_rtx)
4812 && ! memory_address_p (mode, ad))
4814 *loc = ad = gen_rtx_PLUS (GET_MODE (ad),
4815 XEXP (XEXP (ad, 0), 0),
4816 plus_constant (XEXP (XEXP (ad, 0), 1),
4817 INTVAL (XEXP (ad, 1))));
4818 find_reloads_address_part (XEXP (ad, 1), &XEXP (ad, 1),
4819 reload_address_base_reg_class,
4820 GET_MODE (ad), opnum, type, ind_levels);
4821 find_reloads_address_1 (mode, XEXP (ad, 0), 1, &XEXP (ad, 0), opnum,
4827 /* See if address becomes valid when an eliminable register
4828 in a sum is replaced. */
4831 if (GET_CODE (ad) == PLUS)
4832 tem = subst_indexed_address (ad);
4833 if (tem != ad && strict_memory_address_p (mode, tem))
4835 /* Ok, we win that way. Replace any additional eliminable
4838 subst_reg_equivs_changed = 0;
4839 tem = subst_reg_equivs (tem);
4841 /* Make sure that didn't make the address invalid again. */
4843 if (! subst_reg_equivs_changed || strict_memory_address_p (mode, tem))
4850 /* If constants aren't valid addresses, reload the constant address
4852 if (CONSTANT_P (ad) && ! strict_memory_address_p (mode, ad))
4854 /* If AD is in address in the constant pool, the MEM rtx may be shared.
4855 Unshare it so we can safely alter it. */
4856 if (memrefloc && GET_CODE (ad) == SYMBOL_REF
4857 && CONSTANT_POOL_ADDRESS_P (ad))
4859 *memrefloc = copy_rtx (*memrefloc);
4860 loc = &XEXP (*memrefloc, 0);
4863 find_reloads_address_part (ad, loc, reload_address_base_reg_class,
4869 return find_reloads_address_1 (mode, ad, 0, loc, opnum, type, ind_levels,
4873 /* Find all pseudo regs appearing in AD
4874 that are eliminable in favor of equivalent values
4875 and do not have hard regs; replace them by their equivalents. */
4878 subst_reg_equivs (ad)
4881 register RTX_CODE code = GET_CODE (ad);
4899 register int regno = REGNO (ad);
4901 if (reg_equiv_constant[regno] != 0)
4903 subst_reg_equivs_changed = 1;
4904 return reg_equiv_constant[regno];
4910 /* Quickly dispose of a common case. */
4911 if (XEXP (ad, 0) == frame_pointer_rtx
4912 && GET_CODE (XEXP (ad, 1)) == CONST_INT)
4920 fmt = GET_RTX_FORMAT (code);
4921 for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
4923 XEXP (ad, i) = subst_reg_equivs (XEXP (ad, i));
4927 /* Compute the sum of X and Y, making canonicalizations assumed in an
4928 address, namely: sum constant integers, surround the sum of two
4929 constants with a CONST, put the constant as the second operand, and
4930 group the constant on the outermost sum.
4932 This routine assumes both inputs are already in canonical form. */
4939 enum machine_mode mode = GET_MODE (x);
4941 if (mode == VOIDmode)
4942 mode = GET_MODE (y);
4944 if (mode == VOIDmode)
4947 if (GET_CODE (x) == CONST_INT)
4948 return plus_constant (y, INTVAL (x));
4949 else if (GET_CODE (y) == CONST_INT)
4950 return plus_constant (x, INTVAL (y));
4951 else if (CONSTANT_P (x))
4952 tem = x, x = y, y = tem;
4954 if (GET_CODE (x) == PLUS && CONSTANT_P (XEXP (x, 1)))
4955 return form_sum (XEXP (x, 0), form_sum (XEXP (x, 1), y));
4957 /* Note that if the operands of Y are specified in the opposite
4958 order in the recursive calls below, infinite recursion will occur. */
4959 if (GET_CODE (y) == PLUS && CONSTANT_P (XEXP (y, 1)))
4960 return form_sum (form_sum (x, XEXP (y, 0)), XEXP (y, 1));
4962 /* If both constant, encapsulate sum. Otherwise, just form sum. A
4963 constant will have been placed second. */
4964 if (CONSTANT_P (x) && CONSTANT_P (y))
4966 if (GET_CODE (x) == CONST)
4968 if (GET_CODE (y) == CONST)
4971 return gen_rtx_CONST (VOIDmode, gen_rtx_PLUS (mode, x, y));
4974 return gen_rtx_PLUS (mode, x, y);
4977 /* If ADDR is a sum containing a pseudo register that should be
4978 replaced with a constant (from reg_equiv_constant),
4979 return the result of doing so, and also apply the associative
4980 law so that the result is more likely to be a valid address.
4981 (But it is not guaranteed to be one.)
4983 Note that at most one register is replaced, even if more are
4984 replaceable. Also, we try to put the result into a canonical form
4985 so it is more likely to be a valid address.
4987 In all other cases, return ADDR. */
4990 subst_indexed_address (addr)
4993 rtx op0 = 0, op1 = 0, op2 = 0;
4997 if (GET_CODE (addr) == PLUS)
4999 /* Try to find a register to replace. */
5000 op0 = XEXP (addr, 0), op1 = XEXP (addr, 1), op2 = 0;
5001 if (GET_CODE (op0) == REG
5002 && (regno = REGNO (op0)) >= FIRST_PSEUDO_REGISTER
5003 && reg_renumber[regno] < 0
5004 && reg_equiv_constant[regno] != 0)
5005 op0 = reg_equiv_constant[regno];
5006 else if (GET_CODE (op1) == REG
5007 && (regno = REGNO (op1)) >= FIRST_PSEUDO_REGISTER
5008 && reg_renumber[regno] < 0
5009 && reg_equiv_constant[regno] != 0)
5010 op1 = reg_equiv_constant[regno];
5011 else if (GET_CODE (op0) == PLUS
5012 && (tem = subst_indexed_address (op0)) != op0)
5014 else if (GET_CODE (op1) == PLUS
5015 && (tem = subst_indexed_address (op1)) != op1)
5020 /* Pick out up to three things to add. */
5021 if (GET_CODE (op1) == PLUS)
5022 op2 = XEXP (op1, 1), op1 = XEXP (op1, 0);
5023 else if (GET_CODE (op0) == PLUS)
5024 op2 = op1, op1 = XEXP (op0, 1), op0 = XEXP (op0, 0);
5026 /* Compute the sum. */
5028 op1 = form_sum (op1, op2);
5030 op0 = form_sum (op0, op1);
5037 /* Record the pseudo registers we must reload into hard registers in a
5038 subexpression of a would-be memory address, X referring to a value
5039 in mode MODE. (This function is not called if the address we find
5042 CONTEXT = 1 means we are considering regs as index regs,
5043 = 0 means we are considering them as base regs.
5045 OPNUM and TYPE specify the purpose of any reloads made.
5047 IND_LEVELS says how many levels of indirect addressing are
5048 supported at this point in the address.
5050 INSN, if nonzero, is the insn in which we do the reload. It is used
5051 to determine if we may generate output reloads.
5053 We return nonzero if X, as a whole, is reloaded or replaced. */
5055 /* Note that we take shortcuts assuming that no multi-reg machine mode
5056 occurs as part of an address.
5057 Also, this is not fully machine-customizable; it works for machines
5058 such as vaxes and 68000's and 32000's, but other possible machines
5059 could have addressing modes that this does not handle right. */
5062 find_reloads_address_1 (mode, x, context, loc, opnum, type, ind_levels, insn)
5063 enum machine_mode mode;
5068 enum reload_type type;
5072 register RTX_CODE code = GET_CODE (x);
5078 register rtx orig_op0 = XEXP (x, 0);
5079 register rtx orig_op1 = XEXP (x, 1);
5080 register RTX_CODE code0 = GET_CODE (orig_op0);
5081 register RTX_CODE code1 = GET_CODE (orig_op1);
5082 register rtx op0 = orig_op0;
5083 register rtx op1 = orig_op1;
5085 if (GET_CODE (op0) == SUBREG)
5087 op0 = SUBREG_REG (op0);
5088 code0 = GET_CODE (op0);
5089 if (code0 == REG && REGNO (op0) < FIRST_PSEUDO_REGISTER)
5090 op0 = gen_rtx_REG (word_mode,
5091 REGNO (op0) + SUBREG_WORD (orig_op0));
5094 if (GET_CODE (op1) == SUBREG)
5096 op1 = SUBREG_REG (op1);
5097 code1 = GET_CODE (op1);
5098 if (code1 == REG && REGNO (op1) < FIRST_PSEUDO_REGISTER)
5099 op1 = gen_rtx_REG (GET_MODE (op1),
5100 REGNO (op1) + SUBREG_WORD (orig_op1));
5103 if (code0 == MULT || code0 == SIGN_EXTEND || code0 == TRUNCATE
5104 || code0 == ZERO_EXTEND || code1 == MEM)
5106 find_reloads_address_1 (mode, orig_op0, 1, &XEXP (x, 0), opnum,
5107 type, ind_levels, insn);
5108 find_reloads_address_1 (mode, orig_op1, 0, &XEXP (x, 1), opnum,
5109 type, ind_levels, insn);
5112 else if (code1 == MULT || code1 == SIGN_EXTEND || code1 == TRUNCATE
5113 || code1 == ZERO_EXTEND || code0 == MEM)
5115 find_reloads_address_1 (mode, orig_op0, 0, &XEXP (x, 0), opnum,
5116 type, ind_levels, insn);
5117 find_reloads_address_1 (mode, orig_op1, 1, &XEXP (x, 1), opnum,
5118 type, ind_levels, insn);
5121 else if (code0 == CONST_INT || code0 == CONST
5122 || code0 == SYMBOL_REF || code0 == LABEL_REF)
5123 find_reloads_address_1 (mode, orig_op1, 0, &XEXP (x, 1), opnum,
5124 type, ind_levels, insn);
5126 else if (code1 == CONST_INT || code1 == CONST
5127 || code1 == SYMBOL_REF || code1 == LABEL_REF)
5128 find_reloads_address_1 (mode, orig_op0, 0, &XEXP (x, 0), opnum,
5129 type, ind_levels, insn);
5131 else if (code0 == REG && code1 == REG)
5133 if (REG_OK_FOR_INDEX_P (op0)
5134 && REG_MODE_OK_FOR_BASE_P (op1, mode))
5136 else if (REG_OK_FOR_INDEX_P (op1)
5137 && REG_MODE_OK_FOR_BASE_P (op0, mode))
5139 else if (REG_MODE_OK_FOR_BASE_P (op1, mode))
5140 find_reloads_address_1 (mode, orig_op0, 1, &XEXP (x, 0), opnum,
5141 type, ind_levels, insn);
5142 else if (REG_MODE_OK_FOR_BASE_P (op0, mode))
5143 find_reloads_address_1 (mode, orig_op1, 1, &XEXP (x, 1), opnum,
5144 type, ind_levels, insn);
5145 else if (REG_OK_FOR_INDEX_P (op1))
5146 find_reloads_address_1 (mode, orig_op0, 0, &XEXP (x, 0), opnum,
5147 type, ind_levels, insn);
5148 else if (REG_OK_FOR_INDEX_P (op0))
5149 find_reloads_address_1 (mode, orig_op1, 0, &XEXP (x, 1), opnum,
5150 type, ind_levels, insn);
5153 find_reloads_address_1 (mode, orig_op0, 1, &XEXP (x, 0), opnum,
5154 type, ind_levels, insn);
5155 find_reloads_address_1 (mode, orig_op1, 0, &XEXP (x, 1), opnum,
5156 type, ind_levels, insn);
5160 else if (code0 == REG)
5162 find_reloads_address_1 (mode, orig_op0, 1, &XEXP (x, 0), opnum,
5163 type, ind_levels, insn);
5164 find_reloads_address_1 (mode, orig_op1, 0, &XEXP (x, 1), opnum,
5165 type, ind_levels, insn);
5168 else if (code1 == REG)
5170 find_reloads_address_1 (mode, orig_op1, 1, &XEXP (x, 1), opnum,
5171 type, ind_levels, insn);
5172 find_reloads_address_1 (mode, orig_op0, 0, &XEXP (x, 0), opnum,
5173 type, ind_levels, insn);
5183 if (GET_CODE (XEXP (x, 0)) == REG)
5185 register int regno = REGNO (XEXP (x, 0));
5189 /* A register that is incremented cannot be constant! */
5190 if (regno >= FIRST_PSEUDO_REGISTER
5191 && reg_equiv_constant[regno] != 0)
5194 /* Handle a register that is equivalent to a memory location
5195 which cannot be addressed directly. */
5196 if (reg_equiv_address[regno] != 0)
5198 rtx tem = make_memloc (XEXP (x, 0), regno);
5199 /* First reload the memory location's address.
5200 We can't use ADDR_TYPE (type) here, because we need to
5201 write back the value after reading it, hence we actually
5202 need two registers. */
5203 find_reloads_address (GET_MODE (tem), 0, XEXP (tem, 0),
5204 &XEXP (tem, 0), opnum, type,
5206 /* Put this inside a new increment-expression. */
5207 x = gen_rtx_fmt_e (GET_CODE (x), GET_MODE (x), tem);
5208 /* Proceed to reload that, as if it contained a register. */
5211 /* If we have a hard register that is ok as an index,
5212 don't make a reload. If an autoincrement of a nice register
5213 isn't "valid", it must be that no autoincrement is "valid".
5214 If that is true and something made an autoincrement anyway,
5215 this must be a special context where one is allowed.
5216 (For example, a "push" instruction.)
5217 We can't improve this address, so leave it alone. */
5219 /* Otherwise, reload the autoincrement into a suitable hard reg
5220 and record how much to increment by. */
5222 if (reg_renumber[regno] >= 0)
5223 regno = reg_renumber[regno];
5224 if ((regno >= FIRST_PSEUDO_REGISTER
5225 || !(context ? REGNO_OK_FOR_INDEX_P (regno)
5226 : REGNO_MODE_OK_FOR_BASE_P (regno, mode))))
5233 /* If we can output the register afterwards, do so, this
5234 saves the extra update.
5235 We can do so if we have an INSN - i.e. no JUMP_INSN nor
5236 CALL_INSN - and it does not set CC0.
5237 But don't do this if we cannot directly address the
5238 memory location, since this will make it harder to
5239 reuse address reloads, and increases register pressure.
5240 Also don't do this if we can probably update x directly. */
5241 rtx equiv = reg_equiv_mem[regno];
5242 int icode = (int) add_optab->handlers[(int) Pmode].insn_code;
5243 if (insn && GET_CODE (insn) == INSN && equiv
5245 && ! sets_cc0_p (PATTERN (insn))
5247 && ! (icode != CODE_FOR_nothing
5248 && (*insn_operand_predicate[icode][0]) (equiv, Pmode)
5249 && (*insn_operand_predicate[icode][1]) (equiv, Pmode)))
5254 = push_reload (x, x, loc, loc,
5256 ? reload_address_index_reg_class
5257 : reload_address_base_reg_class),
5258 GET_MODE (x), GET_MODE (x), 0, 0,
5259 opnum, RELOAD_OTHER);
5264 = push_reload (x, NULL_RTX, loc, NULL_PTR,
5266 ? reload_address_index_reg_class
5267 : reload_address_base_reg_class),
5268 GET_MODE (x), GET_MODE (x), 0, 0,
5270 reload_inc[reloadnum]
5271 = find_inc_amount (PATTERN (this_insn), XEXP (x_orig, 0));
5277 /* Update the REG_INC notes. */
5279 for (link = REG_NOTES (this_insn);
5280 link; link = XEXP (link, 1))
5281 if (REG_NOTE_KIND (link) == REG_INC
5282 && REGNO (XEXP (link, 0)) == REGNO (XEXP (x_orig, 0)))
5283 push_replacement (&XEXP (link, 0), reloadnum, VOIDmode);
5289 else if (GET_CODE (XEXP (x, 0)) == MEM)
5291 /* This is probably the result of a substitution, by eliminate_regs,
5292 of an equivalent address for a pseudo that was not allocated to a
5293 hard register. Verify that the specified address is valid and
5294 reload it into a register. */
5295 rtx tem = XEXP (x, 0);
5299 /* Since we know we are going to reload this item, don't decrement
5300 for the indirection level.
5302 Note that this is actually conservative: it would be slightly
5303 more efficient to use the value of SPILL_INDIRECT_LEVELS from
5305 /* We can't use ADDR_TYPE (type) here, because we need to
5306 write back the value after reading it, hence we actually
5307 need two registers. */
5308 find_reloads_address (GET_MODE (x), &XEXP (x, 0),
5309 XEXP (XEXP (x, 0), 0), &XEXP (XEXP (x, 0), 0),
5310 opnum, type, ind_levels, insn);
5312 reloadnum = push_reload (x, NULL_RTX, loc, NULL_PTR,
5314 ? reload_address_index_reg_class
5315 : reload_address_base_reg_class),
5316 GET_MODE (x), VOIDmode, 0, 0, opnum, type);
5317 reload_inc[reloadnum]
5318 = find_inc_amount (PATTERN (this_insn), XEXP (x, 0));
5320 link = FIND_REG_INC_NOTE (this_insn, tem);
5322 push_replacement (&XEXP (link, 0), reloadnum, VOIDmode);
5329 /* This is probably the result of a substitution, by eliminate_regs, of
5330 an equivalent address for a pseudo that was not allocated to a hard
5331 register. Verify that the specified address is valid and reload it
5334 Since we know we are going to reload this item, don't decrement for
5335 the indirection level.
5337 Note that this is actually conservative: it would be slightly more
5338 efficient to use the value of SPILL_INDIRECT_LEVELS from
5341 find_reloads_address (GET_MODE (x), loc, XEXP (x, 0), &XEXP (x, 0),
5342 opnum, ADDR_TYPE (type), ind_levels, insn);
5343 push_reload (*loc, NULL_RTX, loc, NULL_PTR,
5344 (context ? reload_address_index_reg_class
5345 : reload_address_base_reg_class),
5346 GET_MODE (x), VOIDmode, 0, 0, opnum, type);
5351 register int regno = REGNO (x);
5353 if (reg_equiv_constant[regno] != 0)
5355 find_reloads_address_part (reg_equiv_constant[regno], loc,
5357 ? reload_address_index_reg_class
5358 : reload_address_base_reg_class),
5359 GET_MODE (x), opnum, type, ind_levels);
5363 #if 0 /* This might screw code in reload1.c to delete prior output-reload
5364 that feeds this insn. */
5365 if (reg_equiv_mem[regno] != 0)
5367 push_reload (reg_equiv_mem[regno], NULL_RTX, loc, NULL_PTR,
5369 ? reload_address_index_reg_class
5370 : reload_address_base_reg_class),
5371 GET_MODE (x), VOIDmode, 0, 0, opnum, type);
5376 if (reg_equiv_address[regno] != 0)
5378 x = make_memloc (x, regno);
5379 find_reloads_address (GET_MODE (x), 0, XEXP (x, 0), &XEXP (x, 0),
5380 opnum, ADDR_TYPE (type), ind_levels, insn);
5383 if (reg_renumber[regno] >= 0)
5384 regno = reg_renumber[regno];
5386 if ((regno >= FIRST_PSEUDO_REGISTER
5387 || !(context ? REGNO_OK_FOR_INDEX_P (regno)
5388 : REGNO_MODE_OK_FOR_BASE_P (regno, mode))))
5390 push_reload (x, NULL_RTX, loc, NULL_PTR,
5392 ? reload_address_index_reg_class
5393 : reload_address_base_reg_class),
5394 GET_MODE (x), VOIDmode, 0, 0, opnum, type);
5398 /* If a register appearing in an address is the subject of a CLOBBER
5399 in this insn, reload it into some other register to be safe.
5400 The CLOBBER is supposed to make the register unavailable
5401 from before this insn to after it. */
5402 if (regno_clobbered_p (regno, this_insn))
5404 push_reload (x, NULL_RTX, loc, NULL_PTR,
5406 ? reload_address_index_reg_class
5407 : reload_address_base_reg_class),
5408 GET_MODE (x), VOIDmode, 0, 0, opnum, type);
5415 if (GET_CODE (SUBREG_REG (x)) == REG)
5417 /* If this is a SUBREG of a hard register and the resulting register
5418 is of the wrong class, reload the whole SUBREG. This avoids
5419 needless copies if SUBREG_REG is multi-word. */
5420 if (REGNO (SUBREG_REG (x)) < FIRST_PSEUDO_REGISTER)
5422 int regno = REGNO (SUBREG_REG (x)) + SUBREG_WORD (x);
5424 if (! (context ? REGNO_OK_FOR_INDEX_P (regno)
5425 : REGNO_MODE_OK_FOR_BASE_P (regno, mode)))
5427 push_reload (x, NULL_RTX, loc, NULL_PTR,
5429 ? reload_address_index_reg_class
5430 : reload_address_base_reg_class),
5431 GET_MODE (x), VOIDmode, 0, 0, opnum, type);
5435 /* If this is a SUBREG of a pseudo-register, and the pseudo-register
5436 is larger than the class size, then reload the whole SUBREG. */
5439 enum reg_class class = (context
5440 ? reload_address_index_reg_class
5441 : reload_address_base_reg_class);
5442 if (CLASS_MAX_NREGS (class, GET_MODE (SUBREG_REG (x)))
5443 > reg_class_size[class])
5445 push_reload (x, NULL_RTX, loc, NULL_PTR, class,
5446 GET_MODE (x), VOIDmode, 0, 0, opnum, type);
5458 register char *fmt = GET_RTX_FORMAT (code);
5461 for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
5464 find_reloads_address_1 (mode, XEXP (x, i), context, &XEXP (x, i),
5465 opnum, type, ind_levels, insn);
5472 /* X, which is found at *LOC, is a part of an address that needs to be
5473 reloaded into a register of class CLASS. If X is a constant, or if
5474 X is a PLUS that contains a constant, check that the constant is a
5475 legitimate operand and that we are supposed to be able to load
5476 it into the register.
5478 If not, force the constant into memory and reload the MEM instead.
5480 MODE is the mode to use, in case X is an integer constant.
5482 OPNUM and TYPE describe the purpose of any reloads made.
5484 IND_LEVELS says how many levels of indirect addressing this machine
5488 find_reloads_address_part (x, loc, class, mode, opnum, type, ind_levels)
5491 enum reg_class class;
5492 enum machine_mode mode;
5494 enum reload_type type;
5498 && (! LEGITIMATE_CONSTANT_P (x)
5499 || PREFERRED_RELOAD_CLASS (x, class) == NO_REGS))
5501 rtx tem = x = force_const_mem (mode, x);
5502 find_reloads_address (mode, &tem, XEXP (tem, 0), &XEXP (tem, 0),
5503 opnum, type, ind_levels, 0);
5506 else if (GET_CODE (x) == PLUS
5507 && CONSTANT_P (XEXP (x, 1))
5508 && (! LEGITIMATE_CONSTANT_P (XEXP (x, 1))
5509 || PREFERRED_RELOAD_CLASS (XEXP (x, 1), class) == NO_REGS))
5511 rtx tem = force_const_mem (GET_MODE (x), XEXP (x, 1));
5513 x = gen_rtx_PLUS (GET_MODE (x), XEXP (x, 0), tem);
5514 find_reloads_address (mode, &tem, XEXP (tem, 0), &XEXP (tem, 0),
5515 opnum, type, ind_levels, 0);
5518 push_reload (x, NULL_RTX, loc, NULL_PTR, class,
5519 mode, VOIDmode, 0, 0, opnum, type);
5522 /* Substitute into the current INSN the registers into which we have reloaded
5523 the things that need reloading. The array `replacements'
5524 says contains the locations of all pointers that must be changed
5525 and says what to replace them with.
5527 Return the rtx that X translates into; usually X, but modified. */
5534 for (i = 0; i < n_replacements; i++)
5536 register struct replacement *r = &replacements[i];
5537 register rtx reloadreg = reload_reg_rtx[r->what];
5540 /* Encapsulate RELOADREG so its machine mode matches what
5541 used to be there. Note that gen_lowpart_common will
5542 do the wrong thing if RELOADREG is multi-word. RELOADREG
5543 will always be a REG here. */
5544 if (GET_MODE (reloadreg) != r->mode && r->mode != VOIDmode)
5545 reloadreg = gen_rtx_REG (r->mode, REGNO (reloadreg));
5547 /* If we are putting this into a SUBREG and RELOADREG is a
5548 SUBREG, we would be making nested SUBREGs, so we have to fix
5549 this up. Note that r->where == &SUBREG_REG (*r->subreg_loc). */
5551 if (r->subreg_loc != 0 && GET_CODE (reloadreg) == SUBREG)
5553 if (GET_MODE (*r->subreg_loc)
5554 == GET_MODE (SUBREG_REG (reloadreg)))
5555 *r->subreg_loc = SUBREG_REG (reloadreg);
5558 *r->where = SUBREG_REG (reloadreg);
5559 SUBREG_WORD (*r->subreg_loc) += SUBREG_WORD (reloadreg);
5563 *r->where = reloadreg;
5565 /* If reload got no reg and isn't optional, something's wrong. */
5566 else if (! reload_optional[r->what])
5571 /* Make a copy of any replacements being done into X and move those copies
5572 to locations in Y, a copy of X. We only look at the highest level of
5576 copy_replacements (x, y)
5581 enum rtx_code code = GET_CODE (x);
5582 char *fmt = GET_RTX_FORMAT (code);
5583 struct replacement *r;
5585 /* We can't support X being a SUBREG because we might then need to know its
5586 location if something inside it was replaced. */
5590 for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
5592 for (j = 0; j < n_replacements; j++)
5594 if (replacements[j].subreg_loc == &XEXP (x, i))
5596 r = &replacements[n_replacements++];
5597 r->where = replacements[j].where;
5598 r->subreg_loc = &XEXP (y, i);
5599 r->what = replacements[j].what;
5600 r->mode = replacements[j].mode;
5602 else if (replacements[j].where == &XEXP (x, i))
5604 r = &replacements[n_replacements++];
5605 r->where = &XEXP (y, i);
5607 r->what = replacements[j].what;
5608 r->mode = replacements[j].mode;
5613 /* Change any replacements being done to *X to be done to *Y */
5616 move_replacements (x, y)
5622 for (i = 0; i < n_replacements; i++)
5623 if (replacements[i].subreg_loc == x)
5624 replacements[i].subreg_loc = y;
5625 else if (replacements[i].where == x)
5627 replacements[i].where = y;
5628 replacements[i].subreg_loc = 0;
5632 /* If LOC was scheduled to be replaced by something, return the replacement.
5633 Otherwise, return *LOC. */
5636 find_replacement (loc)
5639 struct replacement *r;
5641 for (r = &replacements[0]; r < &replacements[n_replacements]; r++)
5643 rtx reloadreg = reload_reg_rtx[r->what];
5645 if (reloadreg && r->where == loc)
5647 if (r->mode != VOIDmode && GET_MODE (reloadreg) != r->mode)
5648 reloadreg = gen_rtx_REG (r->mode, REGNO (reloadreg));
5652 else if (reloadreg && r->subreg_loc == loc)
5654 /* RELOADREG must be either a REG or a SUBREG.
5656 ??? Is it actually still ever a SUBREG? If so, why? */
5658 if (GET_CODE (reloadreg) == REG)
5659 return gen_rtx_REG (GET_MODE (*loc),
5660 REGNO (reloadreg) + SUBREG_WORD (*loc));
5661 else if (GET_MODE (reloadreg) == GET_MODE (*loc))
5664 return gen_rtx_SUBREG (GET_MODE (*loc), SUBREG_REG (reloadreg),
5665 SUBREG_WORD (reloadreg) + SUBREG_WORD (*loc));
5669 /* If *LOC is a PLUS, MINUS, or MULT, see if a replacement is scheduled for
5670 what's inside and make a new rtl if so. */
5671 if (GET_CODE (*loc) == PLUS || GET_CODE (*loc) == MINUS
5672 || GET_CODE (*loc) == MULT)
5674 rtx x = find_replacement (&XEXP (*loc, 0));
5675 rtx y = find_replacement (&XEXP (*loc, 1));
5677 if (x != XEXP (*loc, 0) || y != XEXP (*loc, 1))
5678 return gen_rtx_fmt_ee (GET_CODE (*loc), GET_MODE (*loc), x, y);
5684 /* Return nonzero if register in range [REGNO, ENDREGNO)
5685 appears either explicitly or implicitly in X
5686 other than being stored into (except for earlyclobber operands).
5688 References contained within the substructure at LOC do not count.
5689 LOC may be zero, meaning don't ignore anything.
5691 This is similar to refers_to_regno_p in rtlanal.c except that we
5692 look at equivalences for pseudos that didn't get hard registers. */
5695 refers_to_regno_for_reload_p (regno, endregno, x, loc)
5696 int regno, endregno;
5701 register RTX_CODE code;
5708 code = GET_CODE (x);
5715 /* If this is a pseudo, a hard register must not have been allocated.
5716 X must therefore either be a constant or be in memory. */
5717 if (i >= FIRST_PSEUDO_REGISTER)
5719 if (reg_equiv_memory_loc[i])
5720 return refers_to_regno_for_reload_p (regno, endregno,
5721 reg_equiv_memory_loc[i],
5724 if (reg_equiv_constant[i])
5730 return (endregno > i
5731 && regno < i + (i < FIRST_PSEUDO_REGISTER
5732 ? HARD_REGNO_NREGS (i, GET_MODE (x))
5736 /* If this is a SUBREG of a hard reg, we can see exactly which
5737 registers are being modified. Otherwise, handle normally. */
5738 if (GET_CODE (SUBREG_REG (x)) == REG
5739 && REGNO (SUBREG_REG (x)) < FIRST_PSEUDO_REGISTER)
5741 int inner_regno = REGNO (SUBREG_REG (x)) + SUBREG_WORD (x);
5743 = inner_regno + (inner_regno < FIRST_PSEUDO_REGISTER
5744 ? HARD_REGNO_NREGS (regno, GET_MODE (x)) : 1);
5746 return endregno > inner_regno && regno < inner_endregno;
5752 if (&SET_DEST (x) != loc
5753 /* Note setting a SUBREG counts as referring to the REG it is in for
5754 a pseudo but not for hard registers since we can
5755 treat each word individually. */
5756 && ((GET_CODE (SET_DEST (x)) == SUBREG
5757 && loc != &SUBREG_REG (SET_DEST (x))
5758 && GET_CODE (SUBREG_REG (SET_DEST (x))) == REG
5759 && REGNO (SUBREG_REG (SET_DEST (x))) >= FIRST_PSEUDO_REGISTER
5760 && refers_to_regno_for_reload_p (regno, endregno,
5761 SUBREG_REG (SET_DEST (x)),
5763 /* If the output is an earlyclobber operand, this is
5765 || ((GET_CODE (SET_DEST (x)) != REG
5766 || earlyclobber_operand_p (SET_DEST (x)))
5767 && refers_to_regno_for_reload_p (regno, endregno,
5768 SET_DEST (x), loc))))
5771 if (code == CLOBBER || loc == &SET_SRC (x))
5780 /* X does not match, so try its subexpressions. */
5782 fmt = GET_RTX_FORMAT (code);
5783 for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
5785 if (fmt[i] == 'e' && loc != &XEXP (x, i))
5793 if (refers_to_regno_for_reload_p (regno, endregno,
5797 else if (fmt[i] == 'E')
5800 for (j = XVECLEN (x, i) - 1; j >=0; j--)
5801 if (loc != &XVECEXP (x, i, j)
5802 && refers_to_regno_for_reload_p (regno, endregno,
5803 XVECEXP (x, i, j), loc))
5810 /* Nonzero if modifying X will affect IN. If X is a register or a SUBREG,
5811 we check if any register number in X conflicts with the relevant register
5812 numbers. If X is a constant, return 0. If X is a MEM, return 1 iff IN
5813 contains a MEM (we don't bother checking for memory addresses that can't
5814 conflict because we expect this to be a rare case.
5816 This function is similar to reg_overlap_mention_p in rtlanal.c except
5817 that we look at equivalences for pseudos that didn't get hard registers. */
5820 reg_overlap_mentioned_for_reload_p (x, in)
5823 int regno, endregno;
5825 /* Overly conservative. */
5826 if (GET_CODE (x) == STRICT_LOW_PART)
5829 /* If either argument is a constant, then modifying X can not affect IN. */
5830 if (CONSTANT_P (x) || CONSTANT_P (in))
5832 else if (GET_CODE (x) == SUBREG)
5834 regno = REGNO (SUBREG_REG (x));
5835 if (regno < FIRST_PSEUDO_REGISTER)
5836 regno += SUBREG_WORD (x);
5838 else if (GET_CODE (x) == REG)
5842 /* If this is a pseudo, it must not have been assigned a hard register.
5843 Therefore, it must either be in memory or be a constant. */
5845 if (regno >= FIRST_PSEUDO_REGISTER)
5847 if (reg_equiv_memory_loc[regno])
5848 return refers_to_mem_for_reload_p (in);
5849 else if (reg_equiv_constant[regno])
5854 else if (GET_CODE (x) == MEM)
5855 return refers_to_mem_for_reload_p (in);
5856 else if (GET_CODE (x) == SCRATCH || GET_CODE (x) == PC
5857 || GET_CODE (x) == CC0)
5858 return reg_mentioned_p (x, in);
5862 endregno = regno + (regno < FIRST_PSEUDO_REGISTER
5863 ? HARD_REGNO_NREGS (regno, GET_MODE (x)) : 1);
5865 return refers_to_regno_for_reload_p (regno, endregno, in, NULL_PTR);
5868 /* Return nonzero if anything in X contains a MEM. Look also for pseudo
5872 refers_to_mem_for_reload_p (x)
5878 if (GET_CODE (x) == MEM)
5881 if (GET_CODE (x) == REG)
5882 return (REGNO (x) >= FIRST_PSEUDO_REGISTER
5883 && reg_equiv_memory_loc[REGNO (x)]);
5885 fmt = GET_RTX_FORMAT (GET_CODE (x));
5886 for (i = GET_RTX_LENGTH (GET_CODE (x)) - 1; i >= 0; i--)
5888 && (GET_CODE (XEXP (x, i)) == MEM
5889 || refers_to_mem_for_reload_p (XEXP (x, i))))
5895 /* Check the insns before INSN to see if there is a suitable register
5896 containing the same value as GOAL.
5897 If OTHER is -1, look for a register in class CLASS.
5898 Otherwise, just see if register number OTHER shares GOAL's value.
5900 Return an rtx for the register found, or zero if none is found.
5902 If RELOAD_REG_P is (short *)1,
5903 we reject any hard reg that appears in reload_reg_rtx
5904 because such a hard reg is also needed coming into this insn.
5906 If RELOAD_REG_P is any other nonzero value,
5907 it is a vector indexed by hard reg number
5908 and we reject any hard reg whose element in the vector is nonnegative
5909 as well as any that appears in reload_reg_rtx.
5911 If GOAL is zero, then GOALREG is a register number; we look
5912 for an equivalent for that register.
5914 MODE is the machine mode of the value we want an equivalence for.
5915 If GOAL is nonzero and not VOIDmode, then it must have mode MODE.
5917 This function is used by jump.c as well as in the reload pass.
5919 If GOAL is the sum of the stack pointer and a constant, we treat it
5920 as if it were a constant except that sp is required to be unchanging. */
5923 find_equiv_reg (goal, insn, class, other, reload_reg_p, goalreg, mode)
5926 enum reg_class class;
5928 short *reload_reg_p;
5930 enum machine_mode mode;
5932 register rtx p = insn;
5933 rtx goaltry, valtry, value, where;
5935 register int regno = -1;
5939 int goal_mem_addr_varies = 0;
5940 int need_stable_sp = 0;
5946 else if (GET_CODE (goal) == REG)
5947 regno = REGNO (goal);
5948 else if (GET_CODE (goal) == MEM)
5950 enum rtx_code code = GET_CODE (XEXP (goal, 0));
5951 if (MEM_VOLATILE_P (goal))
5953 if (flag_float_store && GET_MODE_CLASS (GET_MODE (goal)) == MODE_FLOAT)
5955 /* An address with side effects must be reexecuted. */
5968 else if (CONSTANT_P (goal))
5970 else if (GET_CODE (goal) == PLUS
5971 && XEXP (goal, 0) == stack_pointer_rtx
5972 && CONSTANT_P (XEXP (goal, 1)))
5973 goal_const = need_stable_sp = 1;
5974 else if (GET_CODE (goal) == PLUS
5975 && XEXP (goal, 0) == frame_pointer_rtx
5976 && CONSTANT_P (XEXP (goal, 1)))
5981 /* On some machines, certain regs must always be rejected
5982 because they don't behave the way ordinary registers do. */
5984 #ifdef OVERLAPPING_REGNO_P
5985 if (regno >= 0 && regno < FIRST_PSEUDO_REGISTER
5986 && OVERLAPPING_REGNO_P (regno))
5990 /* Scan insns back from INSN, looking for one that copies
5991 a value into or out of GOAL.
5992 Stop and give up if we reach a label. */
5997 if (p == 0 || GET_CODE (p) == CODE_LABEL)
5999 if (GET_CODE (p) == INSN
6000 /* If we don't want spill regs ... */
6001 && (! (reload_reg_p != 0
6002 && reload_reg_p != (short *) (HOST_WIDE_INT) 1)
6003 /* ... then ignore insns introduced by reload; they aren't useful
6004 and can cause results in reload_as_needed to be different
6005 from what they were when calculating the need for spills.
6006 If we notice an input-reload insn here, we will reject it below,
6007 but it might hide a usable equivalent. That makes bad code.
6008 It may even abort: perhaps no reg was spilled for this insn
6009 because it was assumed we would find that equivalent. */
6010 || INSN_UID (p) < reload_first_uid))
6013 pat = single_set (p);
6014 /* First check for something that sets some reg equal to GOAL. */
6017 && true_regnum (SET_SRC (pat)) == regno
6018 && (valueno = true_regnum (valtry = SET_DEST (pat))) >= 0)
6021 && true_regnum (SET_DEST (pat)) == regno
6022 && (valueno = true_regnum (valtry = SET_SRC (pat))) >= 0)
6024 (goal_const && rtx_equal_p (SET_SRC (pat), goal)
6025 /* When looking for stack pointer + const,
6026 make sure we don't use a stack adjust. */
6027 && !reg_overlap_mentioned_for_reload_p (SET_DEST (pat), goal)
6028 && (valueno = true_regnum (valtry = SET_DEST (pat))) >= 0)
6030 && (valueno = true_regnum (valtry = SET_DEST (pat))) >= 0
6031 && rtx_renumbered_equal_p (goal, SET_SRC (pat)))
6033 && (valueno = true_regnum (valtry = SET_SRC (pat))) >= 0
6034 && rtx_renumbered_equal_p (goal, SET_DEST (pat)))
6035 /* If we are looking for a constant,
6036 and something equivalent to that constant was copied
6037 into a reg, we can use that reg. */
6038 || (goal_const && (tem = find_reg_note (p, REG_EQUIV,
6040 && rtx_equal_p (XEXP (tem, 0), goal)
6041 && (valueno = true_regnum (valtry = SET_DEST (pat))) >= 0)
6042 || (goal_const && (tem = find_reg_note (p, REG_EQUIV,
6044 && GET_CODE (SET_DEST (pat)) == REG
6045 && GET_CODE (XEXP (tem, 0)) == CONST_DOUBLE
6046 && GET_MODE_CLASS (GET_MODE (XEXP (tem, 0))) == MODE_FLOAT
6047 && GET_CODE (goal) == CONST_INT
6048 && 0 != (goaltry = operand_subword (XEXP (tem, 0), 0, 0,
6050 && rtx_equal_p (goal, goaltry)
6051 && (valtry = operand_subword (SET_DEST (pat), 0, 0,
6053 && (valueno = true_regnum (valtry)) >= 0)
6054 || (goal_const && (tem = find_reg_note (p, REG_EQUIV,
6056 && GET_CODE (SET_DEST (pat)) == REG
6057 && GET_CODE (XEXP (tem, 0)) == CONST_DOUBLE
6058 && GET_MODE_CLASS (GET_MODE (XEXP (tem, 0))) == MODE_FLOAT
6059 && GET_CODE (goal) == CONST_INT
6060 && 0 != (goaltry = operand_subword (XEXP (tem, 0), 1, 0,
6062 && rtx_equal_p (goal, goaltry)
6064 = operand_subword (SET_DEST (pat), 1, 0, VOIDmode))
6065 && (valueno = true_regnum (valtry)) >= 0)))
6068 : ((unsigned) valueno < FIRST_PSEUDO_REGISTER
6069 && TEST_HARD_REG_BIT (reg_class_contents[(int) class],
6079 /* We found a previous insn copying GOAL into a suitable other reg VALUE
6080 (or copying VALUE into GOAL, if GOAL is also a register).
6081 Now verify that VALUE is really valid. */
6083 /* VALUENO is the register number of VALUE; a hard register. */
6085 /* Don't try to re-use something that is killed in this insn. We want
6086 to be able to trust REG_UNUSED notes. */
6087 if (find_reg_note (where, REG_UNUSED, value))
6090 /* If we propose to get the value from the stack pointer or if GOAL is
6091 a MEM based on the stack pointer, we need a stable SP. */
6092 if (valueno == STACK_POINTER_REGNUM || regno == STACK_POINTER_REGNUM
6093 || (goal_mem && reg_overlap_mentioned_for_reload_p (stack_pointer_rtx,
6097 /* Reject VALUE if the copy-insn moved the wrong sort of datum. */
6098 if (GET_MODE (value) != mode)
6101 /* Reject VALUE if it was loaded from GOAL
6102 and is also a register that appears in the address of GOAL. */
6104 if (goal_mem && value == SET_DEST (single_set (where))
6105 && refers_to_regno_for_reload_p (valueno,
6107 + HARD_REGNO_NREGS (valueno, mode)),
6111 /* Reject registers that overlap GOAL. */
6113 if (!goal_mem && !goal_const
6114 && regno + HARD_REGNO_NREGS (regno, mode) > valueno
6115 && regno < valueno + HARD_REGNO_NREGS (valueno, mode))
6118 /* Reject VALUE if it is one of the regs reserved for reloads.
6119 Reload1 knows how to reuse them anyway, and it would get
6120 confused if we allocated one without its knowledge.
6121 (Now that insns introduced by reload are ignored above,
6122 this case shouldn't happen, but I'm not positive.) */
6124 if (reload_reg_p != 0 && reload_reg_p != (short *) (HOST_WIDE_INT) 1
6125 && reload_reg_p[valueno] >= 0)
6128 /* On some machines, certain regs must always be rejected
6129 because they don't behave the way ordinary registers do. */
6131 #ifdef OVERLAPPING_REGNO_P
6132 if (OVERLAPPING_REGNO_P (valueno))
6136 nregs = HARD_REGNO_NREGS (regno, mode);
6137 valuenregs = HARD_REGNO_NREGS (valueno, mode);
6139 /* Reject VALUE if it is a register being used for an input reload
6140 even if it is not one of those reserved. */
6142 if (reload_reg_p != 0)
6145 for (i = 0; i < n_reloads; i++)
6146 if (reload_reg_rtx[i] != 0 && reload_in[i])
6148 int regno1 = REGNO (reload_reg_rtx[i]);
6149 int nregs1 = HARD_REGNO_NREGS (regno1,
6150 GET_MODE (reload_reg_rtx[i]));
6151 if (regno1 < valueno + valuenregs
6152 && regno1 + nregs1 > valueno)
6158 /* We must treat frame pointer as varying here,
6159 since it can vary--in a nonlocal goto as generated by expand_goto. */
6160 goal_mem_addr_varies = !CONSTANT_ADDRESS_P (XEXP (goal, 0));
6162 /* Now verify that the values of GOAL and VALUE remain unaltered
6163 until INSN is reached. */
6172 /* Don't trust the conversion past a function call
6173 if either of the two is in a call-clobbered register, or memory. */
6174 if (GET_CODE (p) == CALL_INSN
6175 && ((regno >= 0 && regno < FIRST_PSEUDO_REGISTER
6176 && call_used_regs[regno])
6178 (valueno >= 0 && valueno < FIRST_PSEUDO_REGISTER
6179 && call_used_regs[valueno])
6185 #ifdef NON_SAVING_SETJMP
6186 if (NON_SAVING_SETJMP && GET_CODE (p) == NOTE
6187 && NOTE_LINE_NUMBER (p) == NOTE_INSN_SETJMP)
6191 #ifdef INSN_CLOBBERS_REGNO_P
6192 if ((valueno >= 0 && valueno < FIRST_PSEUDO_REGISTER
6193 && INSN_CLOBBERS_REGNO_P (p, valueno))
6194 || (regno >= 0 && regno < FIRST_PSEUDO_REGISTER
6195 && INSN_CLOBBERS_REGNO_P (p, regno)))
6199 if (GET_RTX_CLASS (GET_CODE (p)) == 'i')
6201 /* If this insn P stores in either GOAL or VALUE, return 0.
6202 If GOAL is a memory ref and this insn writes memory, return 0.
6203 If GOAL is a memory ref and its address is not constant,
6204 and this insn P changes a register used in GOAL, return 0. */
6207 if (GET_CODE (pat) == SET || GET_CODE (pat) == CLOBBER)
6209 register rtx dest = SET_DEST (pat);
6210 while (GET_CODE (dest) == SUBREG
6211 || GET_CODE (dest) == ZERO_EXTRACT
6212 || GET_CODE (dest) == SIGN_EXTRACT
6213 || GET_CODE (dest) == STRICT_LOW_PART)
6214 dest = XEXP (dest, 0);
6215 if (GET_CODE (dest) == REG)
6217 register int xregno = REGNO (dest);
6219 if (REGNO (dest) < FIRST_PSEUDO_REGISTER)
6220 xnregs = HARD_REGNO_NREGS (xregno, GET_MODE (dest));
6223 if (xregno < regno + nregs && xregno + xnregs > regno)
6225 if (xregno < valueno + valuenregs
6226 && xregno + xnregs > valueno)
6228 if (goal_mem_addr_varies
6229 && reg_overlap_mentioned_for_reload_p (dest, goal))
6231 if (xregno == STACK_POINTER_REGNUM && need_stable_sp)
6234 else if (goal_mem && GET_CODE (dest) == MEM
6235 && ! push_operand (dest, GET_MODE (dest)))
6237 else if (GET_CODE (dest) == MEM && regno >= FIRST_PSEUDO_REGISTER
6238 && reg_equiv_memory_loc[regno] != 0)
6240 else if (need_stable_sp && push_operand (dest, GET_MODE (dest)))
6243 else if (GET_CODE (pat) == PARALLEL)
6246 for (i = XVECLEN (pat, 0) - 1; i >= 0; i--)
6248 register rtx v1 = XVECEXP (pat, 0, i);
6249 if (GET_CODE (v1) == SET || GET_CODE (v1) == CLOBBER)
6251 register rtx dest = SET_DEST (v1);
6252 while (GET_CODE (dest) == SUBREG
6253 || GET_CODE (dest) == ZERO_EXTRACT
6254 || GET_CODE (dest) == SIGN_EXTRACT
6255 || GET_CODE (dest) == STRICT_LOW_PART)
6256 dest = XEXP (dest, 0);
6257 if (GET_CODE (dest) == REG)
6259 register int xregno = REGNO (dest);
6261 if (REGNO (dest) < FIRST_PSEUDO_REGISTER)
6262 xnregs = HARD_REGNO_NREGS (xregno, GET_MODE (dest));
6265 if (xregno < regno + nregs
6266 && xregno + xnregs > regno)
6268 if (xregno < valueno + valuenregs
6269 && xregno + xnregs > valueno)
6271 if (goal_mem_addr_varies
6272 && reg_overlap_mentioned_for_reload_p (dest,
6275 if (xregno == STACK_POINTER_REGNUM && need_stable_sp)
6278 else if (goal_mem && GET_CODE (dest) == MEM
6279 && ! push_operand (dest, GET_MODE (dest)))
6281 else if (GET_CODE (dest) == MEM && regno >= FIRST_PSEUDO_REGISTER
6282 && reg_equiv_memory_loc[regno] != 0)
6284 else if (need_stable_sp
6285 && push_operand (dest, GET_MODE (dest)))
6291 if (GET_CODE (p) == CALL_INSN && CALL_INSN_FUNCTION_USAGE (p))
6295 for (link = CALL_INSN_FUNCTION_USAGE (p); XEXP (link, 1) != 0;
6296 link = XEXP (link, 1))
6298 pat = XEXP (link, 0);
6299 if (GET_CODE (pat) == CLOBBER)
6301 register rtx dest = SET_DEST (pat);
6302 while (GET_CODE (dest) == SUBREG
6303 || GET_CODE (dest) == ZERO_EXTRACT
6304 || GET_CODE (dest) == SIGN_EXTRACT
6305 || GET_CODE (dest) == STRICT_LOW_PART)
6306 dest = XEXP (dest, 0);
6307 if (GET_CODE (dest) == REG)
6309 register int xregno = REGNO (dest);
6311 if (REGNO (dest) < FIRST_PSEUDO_REGISTER)
6312 xnregs = HARD_REGNO_NREGS (xregno, GET_MODE (dest));
6315 if (xregno < regno + nregs
6316 && xregno + xnregs > regno)
6318 if (xregno < valueno + valuenregs
6319 && xregno + xnregs > valueno)
6321 if (goal_mem_addr_varies
6322 && reg_overlap_mentioned_for_reload_p (dest,
6326 else if (goal_mem && GET_CODE (dest) == MEM
6327 && ! push_operand (dest, GET_MODE (dest)))
6329 else if (need_stable_sp
6330 && push_operand (dest, GET_MODE (dest)))
6337 /* If this insn auto-increments or auto-decrements
6338 either regno or valueno, return 0 now.
6339 If GOAL is a memory ref and its address is not constant,
6340 and this insn P increments a register used in GOAL, return 0. */
6344 for (link = REG_NOTES (p); link; link = XEXP (link, 1))
6345 if (REG_NOTE_KIND (link) == REG_INC
6346 && GET_CODE (XEXP (link, 0)) == REG)
6348 register int incno = REGNO (XEXP (link, 0));
6349 if (incno < regno + nregs && incno >= regno)
6351 if (incno < valueno + valuenregs && incno >= valueno)
6353 if (goal_mem_addr_varies
6354 && reg_overlap_mentioned_for_reload_p (XEXP (link, 0),
6364 /* Find a place where INCED appears in an increment or decrement operator
6365 within X, and return the amount INCED is incremented or decremented by.
6366 The value is always positive. */
6369 find_inc_amount (x, inced)
6372 register enum rtx_code code = GET_CODE (x);
6378 register rtx addr = XEXP (x, 0);
6379 if ((GET_CODE (addr) == PRE_DEC
6380 || GET_CODE (addr) == POST_DEC
6381 || GET_CODE (addr) == PRE_INC
6382 || GET_CODE (addr) == POST_INC)
6383 && XEXP (addr, 0) == inced)
6384 return GET_MODE_SIZE (GET_MODE (x));
6387 fmt = GET_RTX_FORMAT (code);
6388 for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
6392 register int tem = find_inc_amount (XEXP (x, i), inced);
6399 for (j = XVECLEN (x, i) - 1; j >= 0; j--)
6401 register int tem = find_inc_amount (XVECEXP (x, i, j), inced);
6411 /* Return 1 if register REGNO is the subject of a clobber in insn INSN. */
6414 regno_clobbered_p (regno, insn)
6418 if (GET_CODE (PATTERN (insn)) == CLOBBER
6419 && GET_CODE (XEXP (PATTERN (insn), 0)) == REG)
6420 return REGNO (XEXP (PATTERN (insn), 0)) == regno;
6422 if (GET_CODE (PATTERN (insn)) == PARALLEL)
6424 int i = XVECLEN (PATTERN (insn), 0) - 1;
6428 rtx elt = XVECEXP (PATTERN (insn), 0, i);
6429 if (GET_CODE (elt) == CLOBBER && GET_CODE (XEXP (elt, 0)) == REG
6430 && REGNO (XEXP (elt, 0)) == regno)
6438 static char *reload_when_needed_name[] =
6441 "RELOAD_FOR_OUTPUT",
6443 "RELOAD_FOR_INPUT_ADDRESS",
6444 "RELOAD_FOR_INPADDR_ADDRESS",
6445 "RELOAD_FOR_OUTPUT_ADDRESS",
6446 "RELOAD_FOR_OUTADDR_ADDRESS",
6447 "RELOAD_FOR_OPERAND_ADDRESS",
6448 "RELOAD_FOR_OPADDR_ADDR",
6450 "RELOAD_FOR_OTHER_ADDRESS"
6453 static char *reg_class_names[] = REG_CLASS_NAMES;
6455 /* These functions are used to print the variables set by 'find_reloads' */
6458 debug_reload_to_stream (f)
6466 for (r = 0; r < n_reloads; r++)
6468 fprintf (f, "Reload %d: ", r);
6470 if (reload_in[r] != 0)
6472 fprintf (f, "reload_in (%s) = ",
6473 GET_MODE_NAME (reload_inmode[r]));
6474 print_inline_rtx (f, reload_in[r], 24);
6475 fprintf (f, "\n\t");
6478 if (reload_out[r] != 0)
6480 fprintf (f, "reload_out (%s) = ",
6481 GET_MODE_NAME (reload_outmode[r]));
6482 print_inline_rtx (f, reload_out[r], 24);
6483 fprintf (f, "\n\t");
6486 fprintf (f, "%s, ", reg_class_names[(int) reload_reg_class[r]]);
6488 fprintf (f, "%s (opnum = %d)",
6489 reload_when_needed_name[(int) reload_when_needed[r]],
6492 if (reload_optional[r])
6493 fprintf (f, ", optional");
6495 if (reload_nongroup[r])
6496 fprintf (stderr, ", nongroup");
6498 if (reload_inc[r] != 0)
6499 fprintf (f, ", inc by %d", reload_inc[r]);
6501 if (reload_nocombine[r])
6502 fprintf (f, ", can't combine");
6504 if (reload_secondary_p[r])
6505 fprintf (f, ", secondary_reload_p");
6507 if (reload_in_reg[r] != 0)
6509 fprintf (f, "\n\treload_in_reg: ");
6510 print_inline_rtx (f, reload_in_reg[r], 24);
6513 if (reload_reg_rtx[r] != 0)
6515 fprintf (f, "\n\treload_reg_rtx: ");
6516 print_inline_rtx (f, reload_reg_rtx[r], 24);
6520 if (reload_secondary_in_reload[r] != -1)
6522 fprintf (f, "%ssecondary_in_reload = %d",
6523 prefix, reload_secondary_in_reload[r]);
6527 if (reload_secondary_out_reload[r] != -1)
6528 fprintf (f, "%ssecondary_out_reload = %d\n",
6529 prefix, reload_secondary_out_reload[r]);
6532 if (reload_secondary_in_icode[r] != CODE_FOR_nothing)
6534 fprintf (stderr, "%ssecondary_in_icode = %s", prefix,
6535 insn_name[reload_secondary_in_icode[r]]);
6539 if (reload_secondary_out_icode[r] != CODE_FOR_nothing)
6540 fprintf (stderr, "%ssecondary_out_icode = %s", prefix,
6541 insn_name[reload_secondary_out_icode[r]]);
6550 debug_reload_to_stream (stderr);